aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/atheros/patches-3.18/100-board.patch701
-rw-r--r--target/linux/atheros/patches-3.18/101-early-printk-support.patch5
-rw-r--r--target/linux/atheros/patches-3.18/105-ar2315_pci.patch6
-rw-r--r--target/linux/atheros/patches-3.18/107-ar5312_gpio.patch4
-rw-r--r--target/linux/atheros/patches-3.18/108-ar2315_gpio.patch12
-rw-r--r--target/linux/atheros/patches-3.18/110-ar2313_ethernet.patch6
6 files changed, 321 insertions, 413 deletions
diff --git a/target/linux/atheros/patches-3.18/100-board.patch b/target/linux/atheros/patches-3.18/100-board.patch
index 14ba5c3ef0..03332b6e30 100644
--- a/target/linux/atheros/patches-3.18/100-board.patch
+++ b/target/linux/atheros/patches-3.18/100-board.patch
@@ -5,7 +5,7 @@
family: TNETD7100, 7200 and 7300.
+config ATH25
-+ bool "Atheros 231x/531x SoC support"
++ bool "Atheros AR231x/AR531x SoC support"
+ select CEVT_R4K
+ select CSRC_R4K
+ select DMA_NONCOHERENT
@@ -15,19 +15,19 @@
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_32BIT_KERNEL
+ help
-+ Support for AR231x and AR531x based boards
++ Support for Atheros AR231x and Atheros AR531x based boards
+
config ATH79
bool "Atheros AR71XX/AR724X/AR913X based boards"
select ARCH_REQUIRE_GPIOLIB
-@@ -834,6 +847,7 @@ config MIPS_PARAVIRT
-
+@@ -835,6 +848,7 @@ config MIPS_PARAVIRT
endchoice
-+source "arch/mips/ath25/Kconfig"
source "arch/mips/alchemy/Kconfig"
++source "arch/mips/ath25/Kconfig"
source "arch/mips/ath79/Kconfig"
source "arch/mips/bcm47xx/Kconfig"
+ source "arch/mips/bcm63xx/Kconfig"
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -2,6 +2,7 @@
@@ -51,12 +51,12 @@
+++ b/arch/mips/ath25/Kconfig
@@ -0,0 +1,9 @@
+config SOC_AR5312
-+ bool "Atheros 5312/2312+ support"
++ bool "Atheros AR5312/AR2312+ SoC support"
+ depends on ATH25
+ default y
+
+config SOC_AR2315
-+ bool "Atheros 2315+ support"
++ bool "Atheros AR2315+ SoC support"
+ depends on ATH25
+ default y
--- /dev/null
@@ -77,7 +77,7 @@
+obj-$(CONFIG_SOC_AR2315) += ar2315.o
--- /dev/null
+++ b/arch/mips/ath25/board.c
-@@ -0,0 +1,235 @@
+@@ -0,0 +1,234 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
@@ -266,8 +266,7 @@
+static void ath25_halt(void)
+{
+ local_irq_disable();
-+ while (1)
-+ ;
++ unreachable();
+}
+
+void __init plat_mem_setup(void)
@@ -329,7 +328,7 @@
+ */
+
+/*
-+ * Prom setup file for ar231x
++ * Prom setup file for AR5312/AR231x SoCs
+ */
+
+#include <linux/init.h>
@@ -619,7 +618,7 @@
+#endif /* __ASM_MACH_ATH25_WAR_H */
--- /dev/null
+++ b/arch/mips/ath25/ar2315_regs.h
-@@ -0,0 +1,471 @@
+@@ -0,0 +1,410 @@
+/*
+ * Register definitions for AR2315+
+ *
@@ -680,174 +679,128 @@
+#define AR2315_PCI_EXT_SIZE 0x40000000
+
+/*
-+ * Cold reset register
++ * Configuration registers
+ */
++
++/* Cold reset register */
+#define AR2315_COLD_RESET 0x0000
+
-+#define AR2315_RESET_COLD_AHB 0x00000001
-+#define AR2315_RESET_COLD_APB 0x00000002
-+#define AR2315_RESET_COLD_CPU 0x00000004
-+#define AR2315_RESET_COLD_CPUWARM 0x00000008
-+#define AR2315_RESET_SYSTEM \
-+ (RESET_COLD_CPU |\
-+ RESET_COLD_APB |\
-+ RESET_COLD_AHB) /* full system */
-+#define AR2317_RESET_SYSTEM 0x00000010
++#define AR2315_RESET_COLD_AHB 0x00000001
++#define AR2315_RESET_COLD_APB 0x00000002
++#define AR2315_RESET_COLD_CPU 0x00000004
++#define AR2315_RESET_COLD_CPUWARM 0x00000008
++#define AR2315_RESET_SYSTEM (RESET_COLD_CPU |\
++ RESET_COLD_APB |\
++ RESET_COLD_AHB) /* full system */
++#define AR2317_RESET_SYSTEM 0x00000010
+
-+/*
-+ * Reset register
-+ */
++/* Reset register */
+#define AR2315_RESET 0x0004
+
-+/* warm reset WLAN0 MAC */
-+#define AR2315_RESET_WARM_WLAN0_MAC 0x00000001
-+/* warm reset WLAN0 BaseBand */
-+#define AR2315_RESET_WARM_WLAN0_BB 0x00000002
-+/* warm reset MPEG-TS */
-+#define AR2315_RESET_MPEGTS_RSVD 0x00000004
-+/* warm reset PCI ahb/dma */
-+#define AR2315_RESET_PCIDMA 0x00000008
-+/* warm reset memory controller */
-+#define AR2315_RESET_MEMCTL 0x00000010
-+/* warm reset local bus */
-+#define AR2315_RESET_LOCAL 0x00000020
-+/* warm reset I2C bus */
-+#define AR2315_RESET_I2C_RSVD 0x00000040
-+/* warm reset SPI interface */
-+#define AR2315_RESET_SPI 0x00000080
-+/* warm reset UART0 */
-+#define AR2315_RESET_UART0 0x00000100
-+/* warm reset IR interface */
-+#define AR2315_RESET_IR_RSVD 0x00000200
-+/* cold reset ENET0 phy */
-+#define AR2315_RESET_EPHY0 0x00000400
-+/* cold reset ENET0 mac */
-+#define AR2315_RESET_ENET0 0x00000800
-+
-+/*
-+ * AHB master arbitration control
-+ */
++#define AR2315_RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */
++#define AR2315_RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BB */
++#define AR2315_RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */
++#define AR2315_RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */
++#define AR2315_RESET_MEMCTL 0x00000010 /* warm reset mem control */
++#define AR2315_RESET_LOCAL 0x00000020 /* warm reset local bus */
++#define AR2315_RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */
++#define AR2315_RESET_SPI 0x00000080 /* warm reset SPI iface */
++#define AR2315_RESET_UART0 0x00000100 /* warm reset UART0 */
++#define AR2315_RESET_IR_RSVD 0x00000200 /* warm reset IR iface */
++#define AR2315_RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */
++#define AR2315_RESET_ENET0 0x00000800 /* cold reset ENET0 MAC */
++
++/* AHB master arbitration control */
+#define AR2315_AHB_ARB_CTL 0x0008
+
-+/* CPU, default */
-+#define AR2315_ARB_CPU 0x00000001
-+/* WLAN */
-+#define AR2315_ARB_WLAN 0x00000002
-+/* MPEG-TS */
-+#define AR2315_ARB_MPEGTS_RSVD 0x00000004
-+/* LOCAL */
-+#define AR2315_ARB_LOCAL 0x00000008
-+/* PCI */
-+#define AR2315_ARB_PCI 0x00000010
-+/* Ethernet */
-+#define AR2315_ARB_ETHERNET 0x00000020
-+/* retry policy, debug only */
-+#define AR2315_ARB_RETRY 0x00000100
++#define AR2315_ARB_CPU 0x00000001 /* CPU, default */
++#define AR2315_ARB_WLAN 0x00000002 /* WLAN */
++#define AR2315_ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */
++#define AR2315_ARB_LOCAL 0x00000008 /* Local bus */
++#define AR2315_ARB_PCI 0x00000010 /* PCI bus */
++#define AR2315_ARB_ETHERNET 0x00000020 /* Ethernet */
++#define AR2315_ARB_RETRY 0x00000100 /* Retry policy (debug) */
+
-+/*
-+ * Config Register
-+ */
++/* Config Register */
+#define AR2315_ENDIAN_CTL 0x000c
+
-+/* EC - AHB bridge endianess */
-+#define AR2315_CONFIG_AHB 0x00000001
-+/* WLAN byteswap */
-+#define AR2315_CONFIG_WLAN 0x00000002
-+/* MPEG-TS byteswap */
-+#define AR2315_CONFIG_MPEGTS_RSVD 0x00000004
-+/* PCI byteswap */
-+#define AR2315_CONFIG_PCI 0x00000008
-+/* Memory controller endianess */
-+#define AR2315_CONFIG_MEMCTL 0x00000010
-+/* Local bus byteswap */
-+#define AR2315_CONFIG_LOCAL 0x00000020
-+/* Ethernet byteswap */
-+#define AR2315_CONFIG_ETHERNET 0x00000040
-+
-+/* CPU write buffer merge */
-+#define AR2315_CONFIG_MERGE 0x00000200
-+/* CPU big endian */
-+#define AR2315_CONFIG_CPU 0x00000400
-+#define AR2315_CONFIG_PCIAHB 0x00000800
-+#define AR2315_CONFIG_PCIAHB_BRIDGE 0x00001000
-+/* SPI byteswap */
-+#define AR2315_CONFIG_SPI 0x00008000
-+#define AR2315_CONFIG_CPU_DRAM 0x00010000
-+#define AR2315_CONFIG_CPU_PCI 0x00020000
-+#define AR2315_CONFIG_CPU_MMR 0x00040000
-+#define AR2315_CONFIG_BIG 0x00000400
-+
-+/*
-+ * NMI control
-+ */
++#define AR2315_CONFIG_AHB 0x00000001 /* EC-AHB bridge endian */
++#define AR2315_CONFIG_WLAN 0x00000002 /* WLAN byteswap */
++#define AR2315_CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */
++#define AR2315_CONFIG_PCI 0x00000008 /* PCI byteswap */
++#define AR2315_CONFIG_MEMCTL 0x00000010 /* Mem controller endian */
++#define AR2315_CONFIG_LOCAL 0x00000020 /* Local bus byteswap */
++#define AR2315_CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */
++#define AR2315_CONFIG_MERGE 0x00000200 /* CPU write buffer merge */
++#define AR2315_CONFIG_CPU 0x00000400 /* CPU big endian */
++#define AR2315_CONFIG_BIG 0x00000400
++#define AR2315_CONFIG_PCIAHB 0x00000800
++#define AR2315_CONFIG_PCIAHB_BRIDGE 0x00001000
++#define AR2315_CONFIG_SPI 0x00008000 /* SPI byteswap */
++#define AR2315_CONFIG_CPU_DRAM 0x00010000
++#define AR2315_CONFIG_CPU_PCI 0x00020000
++#define AR2315_CONFIG_CPU_MMR 0x00040000
++
++/* NMI control */
+#define AR2315_NMI_CTL 0x0010
+
-+#define AR2315_NMI_EN 1
++#define AR2315_NMI_EN 1
+
-+/*
-+ * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR231X 1.0).
-+ */
++/* Revision Register - Initial value is 0x3010 (WMAC 3.0, AR231X 1.0). */
+#define AR2315_SREV 0x0014
+
-+#define AR2315_REV_MAJ 0x00f0
-+#define AR2315_REV_MAJ_S 4
-+#define AR2315_REV_MIN 0x000f
-+#define AR2315_REV_MIN_S 0
-+#define AR2315_REV_CHIP (AR2315_REV_MAJ|AR2315_REV_MIN)
++#define AR2315_REV_MAJ 0x000000f0
++#define AR2315_REV_MAJ_S 4
++#define AR2315_REV_MIN 0x0000000f
++#define AR2315_REV_MIN_S 0
++#define AR2315_REV_CHIP (AR2315_REV_MAJ | AR2315_REV_MIN)
+
-+/*
-+ * Interface Enable
-+ */
++/* Interface Enable */
+#define AR2315_IF_CTL 0x0018
+
-+#define AR2315_IF_MASK 0x00000007
-+#define AR2315_IF_DISABLED 0
-+#define AR2315_IF_PCI 1
-+#define AR2315_IF_TS_LOCAL 2
-+/* only for emulation with separate pins */
-+#define AR2315_IF_ALL 3
-+#define AR2315_IF_LOCAL_HOST 0x00000008
-+#define AR2315_IF_PCI_HOST 0x00000010
-+#define AR2315_IF_PCI_INTR 0x00000020
-+#define AR2315_IF_PCI_CLK_MASK 0x00030000
-+#define AR2315_IF_PCI_CLK_INPUT 0
-+#define AR2315_IF_PCI_CLK_OUTPUT_LOW 1
-+#define AR2315_IF_PCI_CLK_OUTPUT_CLK 2
-+#define AR2315_IF_PCI_CLK_OUTPUT_HIGH 3
-+#define AR2315_IF_PCI_CLK_SHIFT 16
-+
-+/*
-+ * APB Interrupt control
-+ */
-+
++#define AR2315_IF_MASK 0x00000007
++#define AR2315_IF_DISABLED 0 /* Disable all */
++#define AR2315_IF_PCI 1 /* PCI */
++#define AR2315_IF_TS_LOCAL 2 /* Local bus */
++#define AR2315_IF_ALL 3 /* Emulation only */
++#define AR2315_IF_LOCAL_HOST 0x00000008
++#define AR2315_IF_PCI_HOST 0x00000010
++#define AR2315_IF_PCI_INTR 0x00000020
++#define AR2315_IF_PCI_CLK_MASK 0x00030000
++#define AR2315_IF_PCI_CLK_INPUT 0
++#define AR2315_IF_PCI_CLK_OUTPUT_LOW 1
++#define AR2315_IF_PCI_CLK_OUTPUT_CLK 2
++#define AR2315_IF_PCI_CLK_OUTPUT_HIGH 3
++#define AR2315_IF_PCI_CLK_SHIFT 16
++
++/* APB Interrupt control */
+#define AR2315_ISR 0x0020
+#define AR2315_IMR 0x0024
+#define AR2315_GISR 0x0028
+
-+#define AR2315_ISR_UART0 0x0001 /* high speed UART */
-+#define AR2315_ISR_I2C_RSVD 0x0002 /* I2C bus */
-+#define AR2315_ISR_SPI 0x0004 /* SPI bus */
-+#define AR2315_ISR_AHB 0x0008 /* AHB error */
-+#define AR2315_ISR_APB 0x0010 /* APB error */
-+#define AR2315_ISR_TIMER 0x0020 /* timer */
-+#define AR2315_ISR_GPIO 0x0040 /* GPIO */
-+#define AR2315_ISR_WD 0x0080 /* watchdog */
-+#define AR2315_ISR_IR_RSVD 0x0100 /* IR */
-+
-+#define AR2315_GISR_MISC 0x0001
-+#define AR2315_GISR_WLAN0 0x0002
-+#define AR2315_GISR_MPEGTS_RSVD 0x0004
-+#define AR2315_GISR_LOCALPCI 0x0008
-+#define AR2315_GISR_WMACPOLL 0x0010
-+#define AR2315_GISR_TIMER 0x0020
-+#define AR2315_GISR_ETHERNET 0x0040
-+
-+/*
-+ * Timers
-+ */
++#define AR2315_ISR_UART0 0x00000001 /* high speed UART */
++#define AR2315_ISR_I2C_RSVD 0x00000002 /* I2C bus */
++#define AR2315_ISR_SPI 0x00000004 /* SPI bus */
++#define AR2315_ISR_AHB 0x00000008 /* AHB error */
++#define AR2315_ISR_APB 0x00000010 /* APB error */
++#define AR2315_ISR_TIMER 0x00000020 /* Timer */
++#define AR2315_ISR_GPIO 0x00000040 /* GPIO */
++#define AR2315_ISR_WD 0x00000080 /* Watchdog */
++#define AR2315_ISR_IR_RSVD 0x00000100 /* IR */
++
++#define AR2315_GISR_MISC 0x00000001 /* Misc */
++#define AR2315_GISR_WLAN0 0x00000002 /* WLAN0 */
++#define AR2315_GISR_MPEGTS_RSVD 0x00000004 /* MPEG-TS */
++#define AR2315_GISR_LOCALPCI 0x00000008 /* Local/PCI bus */
++#define AR2315_GISR_WMACPOLL 0x00000010
++#define AR2315_GISR_TIMER 0x00000020
++#define AR2315_GISR_ETHERNET 0x00000040 /* Ethernet */
++
++/* Generic timer */
+#define AR2315_TIMER 0x0030
+#define AR2315_RELOAD 0x0034
+
++/* Watchdog timer */
+#define AR2315_WDT_TIMER 0x0038
+#define AR2315_WDT_CTRL 0x003c
+
@@ -855,31 +808,27 @@
+#define AR2315_WDT_CTRL_NMI 0x00000001 /* NMI on watchdog */
+#define AR2315_WDT_CTRL_RESET 0x00000002 /* reset on watchdog */
+
-+/*
-+ * CPU Performance Counters
-+ */
++/* CPU Performance Counters */
+#define AR2315_PERFCNT0 0x0048
+#define AR2315_PERFCNT1 0x004c
+
-+#define AR2315_PERF0_DATAHIT 0x0001 /* Count Data Cache Hits */
-+#define AR2315_PERF0_DATAMISS 0x0002 /* Count Data Cache Misses */
-+#define AR2315_PERF0_INSTHIT 0x0004 /* Count Instruction Cache Hits */
-+#define AR2315_PERF0_INSTMISS 0x0008 /* Count Instruction Cache Misses */
-+#define AR2315_PERF0_ACTIVE 0x0010 /* Count Active Processor Cycles */
-+#define AR2315_PERF0_WBHIT 0x0020 /* Count CPU Write Buffer Hits */
-+#define AR2315_PERF0_WBMISS 0x0040 /* Count CPU Write Buffer Misses */
-+
-+#define AR2315_PERF1_EB_ARDY 0x0001 /* Count EB_ARdy signal */
-+#define AR2315_PERF1_EB_AVALID 0x0002 /* Count EB_AValid signal */
-+#define AR2315_PERF1_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */
-+#define AR2315_PERF1_EB_RDVAL 0x0008 /* Count EB_RdVal signal */
-+#define AR2315_PERF1_VRADDR 0x0010 /* Count valid read address cycles */
-+#define AR2315_PERF1_VWADDR 0x0020 /* Count valid write address cycles */
-+#define AR2315_PERF1_VWDATA 0x0040 /* Count valid write data cycles */
-+
-+/*
-+ * AHB Error Reporting.
-+ */
++#define AR2315_PERF0_DATAHIT 0x00000001 /* Count Data Cache Hits */
++#define AR2315_PERF0_DATAMISS 0x00000002 /* Count Data Cache Misses */
++#define AR2315_PERF0_INSTHIT 0x00000004 /* Count Instruction Cache Hits */
++#define AR2315_PERF0_INSTMISS 0x00000008 /* Count Instruction Cache Misses */
++#define AR2315_PERF0_ACTIVE 0x00000010 /* Count Active Processor Cycles */
++#define AR2315_PERF0_WBHIT 0x00000020 /* Count CPU Write Buffer Hits */
++#define AR2315_PERF0_WBMISS 0x00000040 /* Count CPU Write Buffer Misses */
++
++#define AR2315_PERF1_EB_ARDY 0x00000001 /* Count EB_ARdy signal */
++#define AR2315_PERF1_EB_AVALID 0x00000002 /* Count EB_AValid signal */
++#define AR2315_PERF1_EB_WDRDY 0x00000004 /* Count EB_WDRdy signal */
++#define AR2315_PERF1_EB_RDVAL 0x00000008 /* Count EB_RdVal signal */
++#define AR2315_PERF1_VRADDR 0x00000010 /* Count valid read address cycles*/
++#define AR2315_PERF1_VWADDR 0x00000020 /* Count valid write address cycl.*/
++#define AR2315_PERF1_VWDATA 0x00000040 /* Count valid write data cycles */
++
++/* AHB Error Reporting */
+#define AR2315_AHB_ERR0 0x0050 /* error */
+#define AR2315_AHB_ERR1 0x0054 /* haddr */
+#define AR2315_AHB_ERR2 0x0058 /* hwdata */
@@ -891,27 +840,24 @@
+#define AR2315_AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */
+#define AR2315_AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */
+
-+#define AR2315_PROCERR_HMAST 0x0000000f
-+#define AR2315_PROCERR_HMAST_DFLT 0
-+#define AR2315_PROCERR_HMAST_WMAC 1
-+#define AR2315_PROCERR_HMAST_ENET 2
-+#define AR2315_PROCERR_HMAST_PCIENDPT 3
-+#define AR2315_PROCERR_HMAST_LOCAL 4
-+#define AR2315_PROCERR_HMAST_CPU 5
-+#define AR2315_PROCERR_HMAST_PCITGT 6
-+
-+#define AR2315_PROCERR_HMAST_S 0
-+#define AR2315_PROCERR_HWRITE 0x00000010
-+#define AR2315_PROCERR_HSIZE 0x00000060
-+#define AR2315_PROCERR_HSIZE_S 5
-+#define AR2315_PROCERR_HTRANS 0x00000180
-+#define AR2315_PROCERR_HTRANS_S 7
-+#define AR2315_PROCERR_HBURST 0x00000e00
-+#define AR2315_PROCERR_HBURST_S 9
-+
-+/*
-+ * Clock Control
-+ */
++#define AR2315_PROCERR_HMAST 0x0000000f
++#define AR2315_PROCERR_HMAST_DFLT 0
++#define AR2315_PROCERR_HMAST_WMAC 1
++#define AR2315_PROCERR_HMAST_ENET 2
++#define AR2315_PROCERR_HMAST_PCIENDPT 3
++#define AR2315_PROCERR_HMAST_LOCAL 4
++#define AR2315_PROCERR_HMAST_CPU 5
++#define AR2315_PROCERR_HMAST_PCITGT 6
++#define AR2315_PROCERR_HMAST_S 0
++#define AR2315_PROCERR_HWRITE 0x00000010
++#define AR2315_PROCERR_HSIZE 0x00000060
++#define AR2315_PROCERR_HSIZE_S 5
++#define AR2315_PROCERR_HTRANS 0x00000180
++#define AR2315_PROCERR_HTRANS_S 7
++#define AR2315_PROCERR_HBURST 0x00000e00
++#define AR2315_PROCERR_HBURST_S 9
++
++/* Clock Control */
+#define AR2315_PLLC_CTL 0x0064
+#define AR2315_PLLV_CTL 0x0068
+#define AR2315_CPUCLK 0x006c
@@ -944,39 +890,30 @@
+#define AR2315_AMBACLK_CLK_DIV_M 0x0000000c
+#define AR2315_AMBACLK_CLK_DIV_S 2
+
-+/*
-+ * PCI Clock Control
-+ */
++/* PCI Clock Control */
+#define AR2315_PCICLK 0x00a4
+
-+#define AR2315_PCICLK_INPUT_M 0x3
-+#define AR2315_PCICLK_INPUT_S 0
-+
-+#define AR2315_PCICLK_PLLC_CLKM 0
-+#define AR2315_PCICLK_PLLC_CLKM1 1
-+#define AR2315_PCICLK_PLLC_CLKC 2
-+#define AR2315_PCICLK_REF_CLK 3
-+
-+#define AR2315_PCICLK_DIV_M 0xc
-+#define AR2315_PCICLK_DIV_S 2
-+
-+#define AR2315_PCICLK_IN_FREQ 0
-+#define AR2315_PCICLK_IN_FREQ_DIV_6 1
-+#define AR2315_PCICLK_IN_FREQ_DIV_8 2
-+#define AR2315_PCICLK_IN_FREQ_DIV_10 3
-+
-+/*
-+ * Observation Control Register
-+ */
++#define AR2315_PCICLK_INPUT_M 0x00000003
++#define AR2315_PCICLK_INPUT_S 0
++#define AR2315_PCICLK_PLLC_CLKM 0
++#define AR2315_PCICLK_PLLC_CLKM1 1
++#define AR2315_PCICLK_PLLC_CLKC 2
++#define AR2315_PCICLK_REF_CLK 3
++#define AR2315_PCICLK_DIV_M 0x0000000c
++#define AR2315_PCICLK_DIV_S 2
++#define AR2315_PCICLK_IN_FREQ 0
++#define AR2315_PCICLK_IN_FREQ_DIV_6 1
++#define AR2315_PCICLK_IN_FREQ_DIV_8 2
++#define AR2315_PCICLK_IN_FREQ_DIV_10 3
++
++/* Observation Control Register */
+#define AR2315_OCR 0x00b0
+
+#define AR2315_OCR_GPIO0_IRIN 0x00000040
+#define AR2315_OCR_GPIO1_IROUT 0x00000080
+#define AR2315_OCR_GPIO3_RXCLR 0x00000200
+
-+/*
-+ * General Clock Control
-+ */
++/* General Clock Control */
+#define AR2315_MISCCLK 0x00b4
+
+#define AR2315_MISCCLK_PLLBYPASS_EN 0x00000001
@@ -1004,65 +941,66 @@
+ */
+#define AR2315_LB_CONFIG 0x0000
+
-+#define AR2315_LBCONF_OE 0x00000001 /* =1 OE is low-true */
-+#define AR2315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */
-+#define AR2315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */
-+#define AR2315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */
-+#define AR2315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */
-+#define AR2315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */
-+#define AR2315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */
-+#define AR2315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */
-+#define AR2315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */
-+#define AR2315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */
-+#define AR2315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */
-+#define AR2315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */
-+#define AR2315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */
-+#define AR2315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */
-+#define AR2315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */
-+#define AR2315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */
-+#define AR2315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */
-+#define AR2315_LBCONF_INT 0x00020000 /* =1 Intr is low true */
-+#define AR2315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */
-+#define AR2315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */
-+#define AR2315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */
-+#define AR2315_LBCONF_INT_CTR3 0x000C0000 /* GND drive, Vdd drive */
-+#define AR2315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */
-+#define AR2315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */
-+#define AR2315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */
++#define AR2315_LBCONF_OE 0x00000001 /* =1 OE is low-true */
++#define AR2315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */
++#define AR2315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */
++#define AR2315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */
++#define AR2315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */
++#define AR2315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */
++#define AR2315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */
++#define AR2315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */
++#define AR2315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */
++#define AR2315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */
++#define AR2315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */
++#define AR2315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */
++#define AR2315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */
++#define AR2315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */
++#define AR2315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */
++#define AR2315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */
++#define AR2315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */
++#define AR2315_LBCONF_INT 0x00020000 /* =1 Intr is low true */
++#define AR2315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */
++#define AR2315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */
++#define AR2315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */
++#define AR2315_LBCONF_INT_CTR3 0x000c0000 /* GND drive, Vdd drive */
++#define AR2315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */
++#define AR2315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */
++#define AR2315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */
+
+#define AR2315_LB_CLKSEL 0x0004
+
-+#define AR2315_LBCLK_EXT 0x0001 /* use external clk for lb */
++#define AR2315_LBCLK_EXT 0x00000001 /* use external clk for lb */
+
+#define AR2315_LB_1MS 0x0008
+
-+#define AR2315_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
++#define AR2315_LB1MS_MASK 0x0003ffff /* # of AHB clk cycles in 1ms */
+
+#define AR2315_LB_MISCCFG 0x000c
-+#define AR2315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */
-+#define AR2315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */
-+#define AR2315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */
-+#define AR2315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */
-+#define AR2315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */
++
++#define AR2315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */
++#define AR2315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */
++#define AR2315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */
++#define AR2315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */
++#define AR2315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */
+#define AR2315_LBM_TIMEOUT_M 0x00ffff80
+#define AR2315_LBM_TIMEOUT_S 7
-+#define AR2315_LBM_PORTMUX 0x07000000
++#define AR2315_LBM_PORTMUX 0x07000000
+
+#define AR2315_LB_RXTSOFF 0x0010
+
+#define AR2315_LB_TX_CHAIN_EN 0x0100
+
-+#define AR2315_LB_TXEN_0 0x01
-+#define AR2315_LB_TXEN_1 0x02
-+#define AR2315_LB_TXEN_2 0x04
-+#define AR2315_LB_TXEN_3 0x08
++#define AR2315_LB_TXEN_0 0x00000001
++#define AR2315_LB_TXEN_1 0x00000002
++#define AR2315_LB_TXEN_2 0x00000004
++#define AR2315_LB_TXEN_3 0x00000008
+
+#define AR2315_LB_TX_CHAIN_DIS 0x0104
+#define AR2315_LB_TX_DESC_PTR 0x0200
+
+#define AR2315_LB_RX_CHAIN_EN 0x0400
+
-+#define AR2315_LB_RXEN 0x01
++#define AR2315_LB_RXEN 0x00000001
+
+#define AR2315_LB_RX_CHAIN_DIS 0x0404
+#define AR2315_LB_RX_DESC_PTR 0x0408
@@ -1093,7 +1031,7 @@
+#endif /* __ASM_MACH_ATH25_AR2315_REGS_H */
--- /dev/null
+++ b/arch/mips/ath25/ar5312_regs.h
-@@ -0,0 +1,223 @@
+@@ -0,0 +1,224 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
@@ -1156,9 +1094,9 @@
+/*
+ * Need these defines to determine true number of ethernet MACs
+ */
-+#define AR5312_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
-+#define AR5312_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
-+#define AR5312_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
++#define AR5312_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
++#define AR5312_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
++#define AR5312_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
+
+/* Reset/Timer Block Address Map */
+#define AR5312_TIMER 0x0000 /* countdown timer */
@@ -1183,96 +1121,95 @@
+#define AR5312_WDT_CTRL_RESET 0x00000002
+
+/* AR5312_ISR register bit field definitions */
-+#define AR5312_ISR_TIMER 0x0001
-+#define AR5312_ISR_AHBPROC 0x0002
-+#define AR5312_ISR_AHBDMA 0x0004
-+#define AR5312_ISR_GPIO 0x0008
-+#define AR5312_ISR_UART0 0x0010
-+#define AR5312_ISR_UART0DMA 0x0020
-+#define AR5312_ISR_WD 0x0040
-+#define AR5312_ISR_LOCAL 0x0080
++#define AR5312_ISR_TIMER 0x00000001
++#define AR5312_ISR_AHBPROC 0x00000002
++#define AR5312_ISR_AHBDMA 0x00000004
++#define AR5312_ISR_GPIO 0x00000008
++#define AR5312_ISR_UART0 0x00000010
++#define AR5312_ISR_UART0DMA 0x00000020
++#define AR5312_ISR_WD 0x00000040
++#define AR5312_ISR_LOCAL 0x00000080
+
+/* AR5312_RESET register bit field definitions */
-+#define AR5312_RESET_SYSTEM 0x00000001 /* cold reset full system */
-+#define AR5312_RESET_PROC 0x00000002 /* cold reset MIPS core */
-+#define AR5312_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
-+#define AR5312_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
-+#define AR5312_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
-+#define AR5312_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
-+#define AR5312_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
-+#define AR5312_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */
-+#define AR5312_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */
-+#define AR5312_RESET_APB 0x00000400 /* cold reset APB (ar5312) */
-+#define AR5312_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
-+#define AR5312_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */
-+#define AR5312_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */
-+#define AR5312_RESET_NMI 0x00010000 /* send an NMI to the processor */
-+#define AR5312_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */
-+#define AR5312_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */
-+#define AR5312_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
-+#define AR5312_RESET_WDOG 0x00100000 /* last reset was a watchdog */
-+
-+#define AR5312_RESET_WMAC0_BITS \
-+ (AR5312_RESET_WLAN0 |\
-+ AR5312_RESET_WARM_WLAN0_MAC |\
-+ AR5312_RESET_WARM_WLAN0_BB)
-+
-+#define AR5312_RESET_WMAC1_BITS \
-+ (AR5312_RESET_WLAN1 |\
-+ AR5312_RESET_WARM_WLAN1_MAC |\
-+ AR5312_RESET_WARM_WLAN1_BB)
++#define AR5312_RESET_SYSTEM 0x00000001 /* cold reset full system */
++#define AR5312_RESET_PROC 0x00000002 /* cold reset MIPS core */
++#define AR5312_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC/BB */
++#define AR5312_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
++#define AR5312_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
++#define AR5312_RESET_ENET0 0x00000020 /* cold reset ENET0 MAC */
++#define AR5312_RESET_ENET1 0x00000040 /* cold reset ENET1 MAC */
++#define AR5312_RESET_UART0 0x00000100 /* cold reset UART0 */
++#define AR5312_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */
++#define AR5312_RESET_APB 0x00000400 /* cold reset APB ar5312 */
++#define AR5312_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
++#define AR5312_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */
++#define AR5312_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BB */
++#define AR5312_RESET_NMI 0x00010000 /* send an NMI to the CPU */
++#define AR5312_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 MAC */
++#define AR5312_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 BB */
++#define AR5312_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
++#define AR5312_RESET_WDOG 0x00100000 /* last reset was a wdt */
++
++#define AR5312_RESET_WMAC0_BITS (AR5312_RESET_WLAN0 |\
++ AR5312_RESET_WARM_WLAN0_MAC |\
++ AR5312_RESET_WARM_WLAN0_BB)
++
++#define AR5312_RESET_WMAC1_BITS (AR5312_RESET_WLAN1 |\
++ AR5312_RESET_WARM_WLAN1_MAC |\
++ AR5312_RESET_WARM_WLAN1_BB)
+
+/* AR5312_CLOCKCTL1 register bit field definitions */
-+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
-+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
-+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
-+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
-+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
++#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
++#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
++#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
++#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
++#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
+
+/* Valid for AR5312 and AR2312 */
-+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
-+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
-+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
-+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
-+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
++#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
++#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
++#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
++#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
++#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
+
+/* Valid for AR2313 */
-+#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000
-+#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12
-+#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000
-+#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16
-+#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000
++#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000
++#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12
++#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000
++#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16
++#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000
+
+/* AR5312_ENABLE register bit field definitions */
-+#define AR5312_ENABLE_WLAN0 0x0001
-+#define AR5312_ENABLE_ENET0 0x0002
-+#define AR5312_ENABLE_ENET1 0x0004
-+#define AR5312_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */
-+#define AR5312_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */
-+#define AR5312_ENABLE_WLAN1 \
-+ (AR5312_ENABLE_UART_AND_WLAN1_PIO |\
-+ AR5312_ENABLE_WLAN1_DMA)
++#define AR5312_ENABLE_WLAN0 0x00000001
++#define AR5312_ENABLE_ENET0 0x00000002
++#define AR5312_ENABLE_ENET1 0x00000004
++#define AR5312_ENABLE_UART_AND_WLAN1_PIO 0x00000008/* UART & WLAN1 PIO */
++#define AR5312_ENABLE_WLAN1_DMA 0x00000010/* WLAN1 DMAs */
++#define AR5312_ENABLE_WLAN1 (AR5312_ENABLE_UART_AND_WLAN1_PIO |\
++ AR5312_ENABLE_WLAN1_DMA)
+
+/* AR5312_REV register bit field definitions */
-+#define AR5312_REV_WMAC_MAJ 0xf000
-+#define AR5312_REV_WMAC_MAJ_S 12
-+#define AR5312_REV_WMAC_MIN 0x0f00
-+#define AR5312_REV_WMAC_MIN_S 8
-+#define AR5312_REV_MAJ 0x00f0
-+#define AR5312_REV_MAJ_S 4
-+#define AR5312_REV_MIN 0x000f
-+#define AR5312_REV_MIN_S 0
-+#define AR5312_REV_CHIP (AR5312_REV_MAJ|AR5312_REV_MIN)
++#define AR5312_REV_WMAC_MAJ 0x0000f000
++#define AR5312_REV_WMAC_MAJ_S 12
++#define AR5312_REV_WMAC_MIN 0x00000f00
++#define AR5312_REV_WMAC_MIN_S 8
++#define AR5312_REV_MAJ 0x000000f0
++#define AR5312_REV_MAJ_S 4
++#define AR5312_REV_MIN 0x0000000f
++#define AR5312_REV_MIN_S 0
++#define AR5312_REV_CHIP (AR5312_REV_MAJ|AR5312_REV_MIN)
+
+/* Major revision numbers, bits 7..4 of Revision ID register */
-+#define AR5312_REV_MAJ_AR5312 0x4
-+#define AR5312_REV_MAJ_AR2313 0x5
++#define AR5312_REV_MAJ_AR5312 0x4
++#define AR5312_REV_MAJ_AR2313 0x5
+
+/* Minor revision numbers, bits 3..0 of Revision ID register */
-+#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */
-+#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */
++#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */
++#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */
+
-+/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */
++/*
++ * ARM Flash Controller -- 3 flash banks with either x8 or x16 devices
++ */
+#define AR5312_FLASHCTL0 0x0000
+#define AR5312_FLASHCTL1 0x0004
+#define AR5312_FLASHCTL2 0x0008
@@ -1308,7 +1245,9 @@
+#define AR5312_FLASHCTL_ATR 0x80000000 /* Access == retry every */
+#define AR5312_FLASHCTL_ATR4 0xc0000000 /* Access == retry every 4 */
+
-+/* ARM SDRAM Controller -- just enough to determine memory size */
++/*
++ * ARM SDRAM Controller -- just enough to determine memory size
++ */
+#define AR5312_MEM_CFG1 0x0004
+
+#define AR5312_MEM_CFG1_AC0_M 0x00000700 /* bank 0: SDRAM addr check */
@@ -1319,7 +1258,7 @@
+#endif /* __ASM_MACH_ATH25_AR5312_REGS_H */
--- /dev/null
+++ b/arch/mips/ath25/ar5312.c
-@@ -0,0 +1,396 @@
+@@ -0,0 +1,393 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
@@ -1333,7 +1272,7 @@
+ */
+
+/*
-+ * Platform devices for Atheros SoCs
++ * Platform devices for Atheros AR5312 SoCs
+ */
+
+#include <linux/init.h>
@@ -1608,12 +1547,10 @@
+
+static unsigned __init ar5312_cpu_frequency(void)
+{
-+ unsigned int scratch;
-+ unsigned int predivide_mask, predivide_shift;
-+ unsigned int multiplier_mask, multiplier_shift;
-+ unsigned int clock_ctl1, predivide_select, predivisor, multiplier;
-+ unsigned int doubler_mask;
-+ u16 devid;
++ u32 scratch, devid, clock_ctl1;
++ u32 predivide_mask, multiplier_mask, doubler_mask;
++ unsigned predivide_shift, multiplier_shift;
++ unsigned predivide_select, predivisor, multiplier;
+
+ /* Trust the bootrom's idea of cpu frequency. */
+ scratch = ar5312_rst_reg_read(AR5312_SCRATCH);
@@ -1621,8 +1558,7 @@
+ return scratch;
+
+ devid = ar5312_rst_reg_read(AR5312_REV);
-+ devid &= AR5312_REV_MAJ;
-+ devid >>= AR5312_REV_MAJ_S;
++ devid = (devid & AR5312_REV_MAJ) >> AR5312_REV_MAJ_S;
+ if (devid == AR5312_REV_MAJ_AR2313) {
+ predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
+ predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
@@ -1644,7 +1580,7 @@
+ * sys_freq = cpu_freq / 4 (used for APB clock, serial,
+ * flash, Timer, Watchdog Timer)
+ *
-+ * cnt_freq = cpu_freq / 2 (use for CPU count/compare)
++ * cnt_freq = cpu_freq / 2 (use for CPU count/compare)
+ *
+ * So, for example, with a PLL multiplier of 5, we have
+ *
@@ -1661,7 +1597,7 @@
+ multiplier = (clock_ctl1 & multiplier_mask) >> multiplier_shift;
+
+ if (clock_ctl1 & doubler_mask)
-+ multiplier = multiplier << 1;
++ multiplier <<= 1;
+
+ return (40000000 / predivisor) * multiplier;
+}
@@ -1718,7 +1654,7 @@
+}
--- /dev/null
+++ b/arch/mips/ath25/ar2315.c
-@@ -0,0 +1,307 @@
+@@ -0,0 +1,308 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
@@ -1732,7 +1668,7 @@
+ */
+
+/*
-+ * Platform devices for Atheros SoCs
++ * Platform devices for Atheros AR2315 SoCs
+ */
+
+#include <linux/init.h>
@@ -1931,7 +1867,7 @@
+ refdiv = clockctl1_predivide_table[refdiv];
+ fdiv = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_FDBACK_DIV);
+ divby2 = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_ADD_FDBACK_DIV) + 1;
-+ pllc_out = (40000000/refdiv)*(2*divby2)*fdiv;
++ pllc_out = (40000000 / refdiv) * (2 * divby2) * fdiv;
+
+ /* clkm input selected */
+ switch (clock_ctl & AR2315_CPUCLK_CLK_SEL_M) {
@@ -1978,6 +1914,7 @@
+ u32 devid;
+ u32 config;
+
++ /* Detect memory size */
+ sdram_base = ioremap_nocache(AR2315_SDRAMCTL_BASE,
+ AR2315_SDRAMCTL_SIZE);
+ memcfg = __raw_readl(sdram_base + AR2315_MEM_CFG);
@@ -2028,7 +1965,7 @@
+}
--- /dev/null
+++ b/arch/mips/ath25/ar2315.h
-@@ -0,0 +1,36 @@
+@@ -0,0 +1,22 @@
+#ifndef __AR2315_H
+#define __AR2315_H
+
@@ -2042,32 +1979,18 @@
+
+#else
+
-+static inline void ar2315_arch_init_irq(void)
-+{
-+}
-+
-+static inline void ar2315_init_devices(void)
-+{
-+}
-+
-+static inline void ar2315_plat_time_init(void)
-+{
-+}
-+
-+static inline void ar2315_plat_mem_setup(void)
-+{
-+}
-+
-+static inline void ar2315_arch_init(void)
-+{
-+}
++static inline void ar2315_arch_init_irq(void) {}
++static inline void ar2315_init_devices(void) {}
++static inline void ar2315_plat_time_init(void) {}
++static inline void ar2315_plat_mem_setup(void) {}
++static inline void ar2315_arch_init(void) {}
+
+#endif
+
-+#endif
++#endif /* __AR2315_H */
--- /dev/null
+++ b/arch/mips/ath25/ar5312.h
-@@ -0,0 +1,36 @@
+@@ -0,0 +1,22 @@
+#ifndef __AR5312_H
+#define __AR5312_H
+
@@ -2081,29 +2004,15 @@
+
+#else
+
-+static inline void ar5312_arch_init_irq(void)
-+{
-+}
-+
-+static inline void ar5312_init_devices(void)
-+{
-+}
-+
-+static inline void ar5312_plat_time_init(void)
-+{
-+}
-+
-+static inline void ar5312_plat_mem_setup(void)
-+{
-+}
-+
-+static inline void ar5312_arch_init(void)
-+{
-+}
++static inline void ar5312_arch_init_irq(void) {}
++static inline void ar5312_init_devices(void) {}
++static inline void ar5312_plat_time_init(void) {}
++static inline void ar5312_plat_mem_setup(void) {}
++static inline void ar5312_arch_init(void) {}
+
+#endif
+
-+#endif
++#endif /* __AR5312_H */
--- /dev/null
+++ b/arch/mips/ath25/devices.h
@@ -0,0 +1,43 @@
@@ -2114,7 +2023,7 @@
+
+#define ATH25_REG_MS(_val, _field) (((_val) & _field##_M) >> _field##_S)
+
-+#define ATH25_IRQ_CPU_CLOCK (MIPS_CPU_IRQ_BASE + 7) /* C0_CAUSE: 0x8000 */
++#define ATH25_IRQ_CPU_CLOCK (MIPS_CPU_IRQ_BASE + 7) /* C0_CAUSE: 0x8000 */
+
+enum ath25_soc_type {
+ /* handled by ar5312.c */
diff --git a/target/linux/atheros/patches-3.18/101-early-printk-support.patch b/target/linux/atheros/patches-3.18/101-early-printk-support.patch
index d193031045..bd937d34a6 100644
--- a/target/linux/atheros/patches-3.18/101-early-printk-support.patch
+++ b/target/linux/atheros/patches-3.18/101-early-printk-support.patch
@@ -1,6 +1,6 @@
--- /dev/null
+++ b/arch/mips/ath25/early_printk.c
-@@ -0,0 +1,45 @@
+@@ -0,0 +1,44 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
@@ -45,7 +45,6 @@
+ while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0)
+ ;
+}
-+
--- a/arch/mips/ath25/Makefile
+++ b/arch/mips/ath25/Makefile
@@ -9,5 +9,8 @@
@@ -65,5 +64,5 @@
select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_HAS_EARLY_PRINTK
help
- Support for AR231x and AR531x based boards
+ Support for Atheros AR231x and Atheros AR531x based boards
diff --git a/target/linux/atheros/patches-3.18/105-ar2315_pci.patch b/target/linux/atheros/patches-3.18/105-ar2315_pci.patch
index 24890b7c58..08b74636dd 100644
--- a/target/linux/atheros/patches-3.18/105-ar2315_pci.patch
+++ b/target/linux/atheros/patches-3.18/105-ar2315_pci.patch
@@ -525,12 +525,12 @@
--- a/arch/mips/ath25/Kconfig
+++ b/arch/mips/ath25/Kconfig
@@ -7,3 +7,10 @@ config SOC_AR2315
- bool "Atheros 2315+ support"
+ bool "Atheros AR2315+ SoC support"
depends on ATH25
default y
+
+config PCI_AR2315
-+ bool "AR2315 PCI controller support"
++ bool "Atheros AR2315 PCI controller support"
+ depends on SOC_AR2315
+ select HW_HAS_PCI
+ select PCI
@@ -548,7 +548,7 @@
else if (pending & CAUSEF_IP2)
do_IRQ(AR2315_IRQ_MISC);
else if (pending & CAUSEF_IP7)
-@@ -298,10 +302,62 @@ void __init ar2315_plat_mem_setup(void)
+@@ -299,10 +303,62 @@ void __init ar2315_plat_mem_setup(void)
_machine_restart = ar2315_restart;
}
diff --git a/target/linux/atheros/patches-3.18/107-ar5312_gpio.patch b/target/linux/atheros/patches-3.18/107-ar5312_gpio.patch
index ae88fd8931..a6d0a88355 100644
--- a/target/linux/atheros/patches-3.18/107-ar5312_gpio.patch
+++ b/target/linux/atheros/patches-3.18/107-ar5312_gpio.patch
@@ -2,7 +2,7 @@
+++ b/arch/mips/ath25/Kconfig
@@ -1,6 +1,7 @@
config SOC_AR5312
- bool "Atheros 5312/2312+ support"
+ bool "Atheros AR5312/AR2312+ SoC support"
depends on ATH25
+ select GPIO_AR5312
default y
@@ -208,5 +208,5 @@
select SYS_HAS_EARLY_PRINTK
+ select ARCH_REQUIRE_GPIOLIB
help
- Support for AR231x and AR531x based boards
+ Support for Atheros AR231x and Atheros AR531x based boards
diff --git a/target/linux/atheros/patches-3.18/108-ar2315_gpio.patch b/target/linux/atheros/patches-3.18/108-ar2315_gpio.patch
index dbc22e81b8..5d9785346d 100644
--- a/target/linux/atheros/patches-3.18/108-ar2315_gpio.patch
+++ b/target/linux/atheros/patches-3.18/108-ar2315_gpio.patch
@@ -2,7 +2,7 @@
+++ b/arch/mips/ath25/Kconfig
@@ -7,6 +7,7 @@ config SOC_AR5312
config SOC_AR2315
- bool "Atheros 2315+ support"
+ bool "Atheros AR2315+ SoC support"
depends on ATH25
+ select GPIO_AR2315
default y
@@ -348,16 +348,16 @@
+
#define ATH25_REG_MS(_val, _field) (((_val) & _field##_M) >> _field##_S)
- #define ATH25_IRQ_CPU_CLOCK (MIPS_CPU_IRQ_BASE + 7) /* C0_CAUSE: 0x8000 */
+ #define ATH25_IRQ_CPU_CLOCK (MIPS_CPU_IRQ_BASE + 7) /* C0_CAUSE: 0x8000 */
--- a/arch/mips/ath25/ar2315_regs.h
+++ b/arch/mips/ath25/ar2315_regs.h
-@@ -322,6 +322,9 @@
- #define AR2315_AMBACLK_CLK_DIV_M 0x0000000c
- #define AR2315_AMBACLK_CLK_DIV_S 2
+@@ -315,6 +315,9 @@
+ #define AR2315_MEM_CFG_BANKADDR_BITS_M 0x00000018
+ #define AR2315_MEM_CFG_BANKADDR_BITS_S 3
+/* GPIO MMR base address */
+#define AR2315_GPIO 0x0088
+
/*
- * PCI Clock Control
+ * Local Bus Interface Registers
*/
diff --git a/target/linux/atheros/patches-3.18/110-ar2313_ethernet.patch b/target/linux/atheros/patches-3.18/110-ar2313_ethernet.patch
index 7ac7b58912..bef70dd7c5 100644
--- a/target/linux/atheros/patches-3.18/110-ar2313_ethernet.patch
+++ b/target/linux/atheros/patches-3.18/110-ar2313_ethernet.patch
@@ -1541,13 +1541,13 @@
+#define AR2315_ENET0_MII_BASE (AR2315_ENET0_BASE + 0x14)
+
/*
- * Cold reset register
+ * Configuration registers
*/
--- a/arch/mips/ath25/ar5312_regs.h
+++ b/arch/mips/ath25/ar5312_regs.h
@@ -64,6 +64,10 @@
- #define AR5312_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
- #define AR5312_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
+ #define AR5312_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
+ #define AR5312_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
+/* MII registers offset inside Ethernet MMR region */
+#define AR5312_ENET0_MII_BASE (AR5312_ENET0_BASE + 0x14)