aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/01_leds5
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network5
-rw-r--r--target/linux/ath79/dts/ar9344_pcs_cr5000.dts226
-rw-r--r--target/linux/ath79/image/generic.mk10
4 files changed, 246 insertions, 0 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
index d8312a9b89..e8f4e1d14e 100755
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -28,6 +28,11 @@ case "$board" in
ucidef_set_led_switch "lan1" "LAN1" "netgear:green:lan1" "switch0" "0x02" "0x0f"
ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f"
;;
+
+"pcs,cr5000")
+ ucidef_set_led_usbdev "usb" "USB" "pcs:white:wps" "1-1"
+ ;;
+
"tplink,re450-v2")
ucidef_set_led_netdev "lan_data" "LAN Data" "tp-link:green:lan_data" "eth0" "tx rx"
ucidef_set_led_netdev "lan_link" "LAN Link" "tp-link:green:lan_link" "eth0" "link"
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index c5e23e4e50..ca023f702f 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -43,6 +43,11 @@ ath79_setup_interfaces()
"0@eth1" "1:lan" "2:lan" "3:lan:3" "4:lan:4"
;;
+ "pcs,cr5000")
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+ ;;
+
"tplink,tl-archer-c7-v2")
ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2"
ucidef_add_switch "switch0" \
diff --git a/target/linux/ath79/dts/ar9344_pcs_cr5000.dts b/target/linux/ath79/dts/ar9344_pcs_cr5000.dts
new file mode 100644
index 0000000000..0d38a3557e
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_pcs_cr5000.dts
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9344.dtsi"
+
+/ {
+ model = "PowerCloud Systems CR5000";
+ compatible = "pcs,cr5000", "qca,ar9344";
+
+ aliases {
+ serial0 = &uart;
+ led-status = &status;
+ };
+
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status: power {
+ label = "pcs:amber:power";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>,
+ <&gpio 4 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan2g {
+ label = "pcs:blue:wlan";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wps_white {
+ label = "pcs:white:wps";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+};
+
+&ref {
+ clock-frequency = <25000000>;
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&spi {
+ num-cs = <1>;
+
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x050000 0x07a0000>;
+ };
+
+ art: partition@7f0000 {
+ label = "art";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&usb {
+ status = "okay";
+
+ port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+
+ hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+ };
+
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@168c,0030 {
+ compatible = "168c,0030";
+ mtd-mac-address = <&art 0x5002>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+ qca,ar8327-initvals = <
+ 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
+ 0x10 0x81000080 /* POWER_ON_STRAP */
+ 0x50 0xcc35cc35 /* LED_CTRL0 */
+ 0x54 0xca35ca35 /* LED_CTRL1 */
+ 0x58 0xc935c935 /* LED_CTRL2 */
+ 0x5c 0x03ffff00 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ /* default for ar934x, except for 1000M */
+ pll-data = <0x06000000 0x00000101 0x00001616>;
+
+ mtd-mac-address = <&art 0x0>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+
+
+ aliases {
+ ag0 = &eth1;
+ };
+
+ port@0 {
+ compatible = "swconfig,port";
+ swconfig,segment = "lan";
+ swconfig,portmap = <1 1>;
+ };
+
+ port@1 {
+ compatible = "swconfig,port";
+ swconfig,segment = "lan";
+ swconfig,portmap = <2 2>;
+ };
+
+ port@2 {
+ compatible = "swconfig,port";
+ swconfig,segment = "lan";
+ swconfig,portmap = <3 3>;
+ };
+
+ port@3 {
+ compatible = "swconfig,port";
+ swconfig,segment = "lan";
+ swconfig,portmap = <4 4>;
+ };
+
+ port@4 {
+ compatible = "swconfig,port";
+ swconfig,segment = "wan";
+ swconfig,portmap = <5 5>;
+ };
+
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x1002>;
+};
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index fbec180496..d8897784ea 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -66,6 +66,16 @@ define Device/openmesh_om5p-ac-v2
endef
TARGET_DEVICES += openmesh_om5p-ac-v2
+define Device/pcs_cr5000
+ ATH_SOC := ar9344
+ DEVICE_TITLE := PowerCloud Systems CR5000
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb-core
+ IMAGE_SIZE := 7808k
+ IMAGES := sysupgrade.bin
+ SUPPORTED_DEVICES += cr5000
+endef
+TARGET_DEVICES += pcs_cr5000
+
define Device/netgear_wndr3800
ATH_SOC := ar7161
DEVICE_TITLE := NETGEAR WNDR3800