aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/apm821xx/patches-4.4/020-sata-dwc.patch1088
1 files changed, 1088 insertions, 0 deletions
diff --git a/target/linux/apm821xx/patches-4.4/020-sata-dwc.patch b/target/linux/apm821xx/patches-4.4/020-sata-dwc.patch
new file mode 100644
index 0000000000..772c0dcf9b
--- /dev/null
+++ b/target/linux/apm821xx/patches-4.4/020-sata-dwc.patch
@@ -0,0 +1,1088 @@
+From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+Date: Sat, 21 May 2016 22:46:32 +0200
+Subject: [PATCH v2 00/23] ata: sata_dwc_460ex: make it working again
+
+The last approach in the commit 8b3444852a2b ("sata_dwc_460ex: move to generic
+DMA driver") to switch to generic DMA engine API wasn't tested on bare metal.
+Besides that we expecting new board support coming with the same SATA IP but
+with different DMA.
+
+This series is targetting the following things:
+- a few bug fixes to the original driver
+- a part to fix the DMA engine usage and in particularly dw_dmac driver
+- move driver to use generic PHY and "dmas" property which leads to update in DTS
+
+The driver has been tested myself on Sam460ex and WD MyBookLive (apollo3g)
+boards. In any case I ask Christian, Måns, and Julian to independently test and
+provide Tested-by tag or an error report.
+
+Series depends on previously published but not yet fully applied series [1].
+
+The patches are also available via public branch [2].
+
+[1] http://www.spinics.net/lists/dmaengine/msg09250.html
+[2] https://bitbucket.org/andy-shev/linux/branch/topic%2Fdw%2Fsata
+
+Since v1:
+- simplify patch 8 (David Laight)
+- add Tested-by and Acked-by tags
+
+Andy Shevchenko (11):
+ ata: sata_dwc_460ex: set dma_boundary to 0x1fff
+ ata: sata_dwc_460ex: burst size must be in items not bytes
+ ata: sata_dwc_460ex: DMA is always a flow controller
+ ata: sata_dwc_460ex: select only core part of DMA driver
+ ata: sata_dwc_460ex: don't call ata_sff_qc_issue() on DMA commands
+ ata: sata_dwc_460ex: correct HOSTDEV{P}_FROM_*() macros
+ ata: sata_dwc_460ex: supply physical address of FIFO to DMA
+ ata: sata_dwc_460ex: switch to new dmaengine_terminate_* API
+ ata: sata_dwc_460ex: use devm_ioremap
+ ata: sata_dwc_460ex: make debug messages neat
+ powerpc/4xx: Device tree update for the 460ex DWC SATA
+
+Christian Lamparter (1):
+ ata: sata_dwc_460ex: fix crash on offline links without an attached
+ drive
+
+Mans Rullgard (11):
+ ata: sata_dwc_460ex: remove incorrect locking
+ ata: sata_dwc_460ex: skip dma setup for non-dma commands
+ ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
+ ata: sata_dwc_460ex: add phy support
+ ata: sata_dwc_460ex: get rid of global data
+ ata: sata_dwc_460ex: remove empty libata callback
+ ata: sata_dwc_460ex: get rid of some pointless casts
+ ata: sata_dwc_460ex: get rid of incorrect cast
+ ata: sata_dwc_460ex: add __iomem to register base pointer
+ ata: sata_dwc_460ex: use readl/writel_relaxed()
+ ata: sata_dwc_460ex: tidy up sata_dwc_clear_dmacr()
+
+ arch/powerpc/boot/dts/canyonlands.dts | 15 +-
+ drivers/ata/Kconfig | 12 +-
+ drivers/ata/sata_dwc_460ex.c | 552 +++++++++++++++++-----------------
+ 3 files changed, 305 insertions(+), 274 deletions(-)
+
+---
+ drivers/ata/sata_dwc_460ex.c | 552 ++++++++++++++++++++++---------------------
+ 1 file changed, 283 insertions(+), 269 deletions(-)
+
+diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
+index 9020349..00c2af1 100644
+--- a/drivers/ata/sata_dwc_460ex.c
++++ b/drivers/ata/sata_dwc_460ex.c
+@@ -30,10 +30,12 @@
+ #include <linux/kernel.h>
+ #include <linux/module.h>
+ #include <linux/device.h>
++#include <linux/dmaengine.h>
+ #include <linux/of_address.h>
+ #include <linux/of_irq.h>
+ #include <linux/of_platform.h>
+ #include <linux/platform_device.h>
++#include <linux/phy/phy.h>
+ #include <linux/libata.h>
+ #include <linux/slab.h>
+
+@@ -42,10 +44,6 @@
+ #include <scsi/scsi_host.h>
+ #include <scsi/scsi_cmnd.h>
+
+-/* Supported DMA engine drivers */
+-#include <linux/platform_data/dma-dw.h>
+-#include <linux/dma/dw.h>
+-
+ /* These two are defined in "libata.h" */
+ #undef DRV_NAME
+ #undef DRV_VERSION
+@@ -53,19 +51,14 @@
+ #define DRV_NAME "sata-dwc"
+ #define DRV_VERSION "1.3"
+
+-#ifndef out_le32
+-#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (void __iomem *)(a))
+-#endif
+-
+-#ifndef in_le32
+-#define in_le32(a) __le32_to_cpu(__raw_readl((void __iomem *)(a)))
+-#endif
++#define sata_dwc_writel(a, v) writel_relaxed(v, a)
++#define sata_dwc_readl(a) readl_relaxed(a)
+
+ #ifndef NO_IRQ
+ #define NO_IRQ 0
+ #endif
+
+-#define AHB_DMA_BRST_DFLT 64 /* 16 data items burst length*/
++#define AHB_DMA_BRST_DFLT 64 /* 16 data items burst length */
+
+ enum {
+ SATA_DWC_MAX_PORTS = 1,
+@@ -102,7 +95,7 @@ struct sata_dwc_regs {
+ u32 versionr; /* Version Register */
+ u32 idr; /* ID Register */
+ u32 unimpl[192]; /* Unimplemented */
+- u32 dmadr[256]; /* FIFO Locations in DMA Mode */
++ u32 dmadr[256]; /* FIFO Locations in DMA Mode */
+ };
+
+ enum {
+@@ -146,9 +139,14 @@ struct sata_dwc_device {
+ struct device *dev; /* generic device struct */
+ struct ata_probe_ent *pe; /* ptr to probe-ent */
+ struct ata_host *host;
+- u8 __iomem *reg_base;
+- struct sata_dwc_regs *sata_dwc_regs; /* DW Synopsys SATA specific */
++ struct sata_dwc_regs __iomem *sata_dwc_regs; /* DW SATA specific */
++ u32 sactive_issued;
++ u32 sactive_queued;
++ struct phy *phy;
++ phys_addr_t dmadr;
++#ifdef CONFIG_SATA_DWC_OLD_DMA
+ struct dw_dma_chip *dma;
++#endif
+ };
+
+ #define SATA_DWC_QCMD_MAX 32
+@@ -159,25 +157,19 @@ struct sata_dwc_device_port {
+ int dma_pending[SATA_DWC_QCMD_MAX];
+
+ /* DMA info */
+- struct dw_dma_slave *dws;
+ struct dma_chan *chan;
+ struct dma_async_tx_descriptor *desc[SATA_DWC_QCMD_MAX];
+ u32 dma_interrupt_count;
+ };
+
+ /*
+- * Commonly used DWC SATA driver Macros
++ * Commonly used DWC SATA driver macros
+ */
+-#define HSDEV_FROM_HOST(host) ((struct sata_dwc_device *)\
+- (host)->private_data)
+-#define HSDEV_FROM_AP(ap) ((struct sata_dwc_device *)\
+- (ap)->host->private_data)
+-#define HSDEVP_FROM_AP(ap) ((struct sata_dwc_device_port *)\
+- (ap)->private_data)
+-#define HSDEV_FROM_QC(qc) ((struct sata_dwc_device *)\
+- (qc)->ap->host->private_data)
+-#define HSDEV_FROM_HSDEVP(p) ((struct sata_dwc_device *)\
+- (hsdevp)->hsdev)
++#define HSDEV_FROM_HOST(host) ((struct sata_dwc_device *)(host)->private_data)
++#define HSDEV_FROM_AP(ap) ((struct sata_dwc_device *)(ap)->host->private_data)
++#define HSDEVP_FROM_AP(ap) ((struct sata_dwc_device_port *)(ap)->private_data)
++#define HSDEV_FROM_QC(qc) ((struct sata_dwc_device *)(qc)->ap->host->private_data)
++#define HSDEV_FROM_HSDEVP(p) ((struct sata_dwc_device *)(p)->hsdev)
+
+ enum {
+ SATA_DWC_CMD_ISSUED_NOT = 0,
+@@ -190,21 +182,6 @@ enum {
+ SATA_DWC_DMA_PENDING_RX = 2,
+ };
+
+-struct sata_dwc_host_priv {
+- void __iomem *scr_addr_sstatus;
+- u32 sata_dwc_sactive_issued ;
+- u32 sata_dwc_sactive_queued ;
+-};
+-
+-static struct sata_dwc_host_priv host_pvt;
+-
+-static struct dw_dma_slave sata_dwc_dma_dws = {
+- .src_id = 0,
+- .dst_id = 0,
+- .src_master = 0,
+- .dst_master = 1,
+-};
+-
+ /*
+ * Prototypes
+ */
+@@ -215,6 +192,93 @@ static void sata_dwc_dma_xfer_complete(struct ata_port *ap, u32 check_status);
+ static void sata_dwc_port_stop(struct ata_port *ap);
+ static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag);
+
++#ifdef CONFIG_SATA_DWC_OLD_DMA
++
++#include <linux/platform_data/dma-dw.h>
++#include <linux/dma/dw.h>
++
++static struct dw_dma_slave sata_dwc_dma_dws = {
++ .src_id = 0,
++ .dst_id = 0,
++ .m_master = 1,
++ .p_master = 0,
++};
++
++static bool sata_dwc_dma_filter(struct dma_chan *chan, void *param)
++{
++ struct dw_dma_slave *dws = &sata_dwc_dma_dws;
++
++ if (dws->dma_dev != chan->device->dev)
++ return false;
++
++ chan->private = dws;
++ return true;
++}
++
++static int sata_dwc_dma_get_channel_old(struct sata_dwc_device_port *hsdevp)
++{
++ struct sata_dwc_device *hsdev = hsdevp->hsdev;
++ struct dw_dma_slave *dws = &sata_dwc_dma_dws;
++ dma_cap_mask_t mask;
++
++ dws->dma_dev = hsdev->dev;
++
++ dma_cap_zero(mask);
++ dma_cap_set(DMA_SLAVE, mask);
++
++ /* Acquire DMA channel */
++ hsdevp->chan = dma_request_channel(mask, sata_dwc_dma_filter, hsdevp);
++ if (!hsdevp->chan) {
++ dev_err(hsdev->dev, "%s: dma channel unavailable\n",
++ __func__);
++ return -EAGAIN;
++ }
++
++ return 0;
++}
++
++static int sata_dwc_dma_init_old(struct platform_device *pdev,
++ struct sata_dwc_device *hsdev)
++{
++ struct device_node *np = pdev->dev.of_node;
++ struct resource *res;
++
++ hsdev->dma = devm_kzalloc(&pdev->dev, sizeof(*hsdev->dma), GFP_KERNEL);
++ if (!hsdev->dma)
++ return -ENOMEM;
++
++ hsdev->dma->dev = &pdev->dev;
++
++ /* Get SATA DMA interrupt number */
++ hsdev->dma->irq = irq_of_parse_and_map(np, 1);
++ if (hsdev->dma->irq == NO_IRQ) {
++ dev_err(&pdev->dev, "no SATA DMA irq\n");
++ return -ENODEV;
++ }
++
++ /* Get physical SATA DMA register base address */
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++ hsdev->dma->regs = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(hsdev->dma->regs)) {
++ dev_err(&pdev->dev,
++ "ioremap failed for AHBDMA register address\n");
++ return PTR_ERR(hsdev->dma->regs);
++ }
++
++ /* Initialize AHB DMAC */
++ return dw_dma_probe(hsdev->dma);
++}
++
++static void sata_dwc_dma_exit_old(struct sata_dwc_device *hsdev)
++{
++ if (!hsdev->dma)
++ return;
++
++ dw_dma_remove(hsdev->dma);
++}
++
++#endif
++
+ static const char *get_prot_descript(u8 protocol)
+ {
+ switch ((enum ata_tf_protocols)protocol) {
+@@ -305,21 +369,20 @@ static struct dma_async_tx_descriptor *dma_dwc_xfer_setup(struct ata_queued_cmd
+ struct ata_port *ap = qc->ap;
+ struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+ struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+- dma_addr_t addr = (dma_addr_t)&hsdev->sata_dwc_regs->dmadr;
+ struct dma_slave_config sconf;
+ struct dma_async_tx_descriptor *desc;
+
+ if (qc->dma_dir == DMA_DEV_TO_MEM) {
+- sconf.src_addr = addr;
+- sconf.device_fc = true;
++ sconf.src_addr = hsdev->dmadr;
++ sconf.device_fc = false;
+ } else { /* DMA_MEM_TO_DEV */
+- sconf.dst_addr = addr;
++ sconf.dst_addr = hsdev->dmadr;
+ sconf.device_fc = false;
+ }
+
+ sconf.direction = qc->dma_dir;
+- sconf.src_maxburst = AHB_DMA_BRST_DFLT;
+- sconf.dst_maxburst = AHB_DMA_BRST_DFLT;
++ sconf.src_maxburst = AHB_DMA_BRST_DFLT / 4; /* in items */
++ sconf.dst_maxburst = AHB_DMA_BRST_DFLT / 4; /* in items */
+ sconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ sconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+
+@@ -336,8 +399,8 @@ static struct dma_async_tx_descriptor *dma_dwc_xfer_setup(struct ata_queued_cmd
+ desc->callback = dma_dwc_xfer_done;
+ desc->callback_param = hsdev;
+
+- dev_dbg(hsdev->dev, "%s sg: 0x%p, count: %d addr: %pad\n",
+- __func__, qc->sg, qc->n_elem, &addr);
++ dev_dbg(hsdev->dev, "%s sg: 0x%p, count: %d addr: %pa\n", __func__,
++ qc->sg, qc->n_elem, &hsdev->dmadr);
+
+ return desc;
+ }
+@@ -350,48 +413,38 @@ static int sata_dwc_scr_read(struct ata_link *link, unsigned int scr, u32 *val)
+ return -EINVAL;
+ }
+
+- *val = in_le32(link->ap->ioaddr.scr_addr + (scr * 4));
+- dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n",
+- __func__, link->ap->print_id, scr, *val);
++ *val = sata_dwc_readl(link->ap->ioaddr.scr_addr + (scr * 4));
++ dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=0x%08x\n", __func__,
++ link->ap->print_id, scr, *val);
+
+ return 0;
+ }
+
+ static int sata_dwc_scr_write(struct ata_link *link, unsigned int scr, u32 val)
+ {
+- dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n",
+- __func__, link->ap->print_id, scr, val);
++ dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=0x%08x\n", __func__,
++ link->ap->print_id, scr, val);
+ if (scr > SCR_NOTIFICATION) {
+ dev_err(link->ap->dev, "%s: Incorrect SCR offset 0x%02x\n",
+ __func__, scr);
+ return -EINVAL;
+ }
+- out_le32(link->ap->ioaddr.scr_addr + (scr * 4), val);
++ sata_dwc_writel(link->ap->ioaddr.scr_addr + (scr * 4), val);
+
+ return 0;
+ }
+
+-static u32 core_scr_read(unsigned int scr)
+-{
+- return in_le32(host_pvt.scr_addr_sstatus + (scr * 4));
+-}
+-
+-static void core_scr_write(unsigned int scr, u32 val)
+-{
+- out_le32(host_pvt.scr_addr_sstatus + (scr * 4), val);
+-}
+-
+-static void clear_serror(void)
++static void clear_serror(struct ata_port *ap)
+ {
+ u32 val;
+- val = core_scr_read(SCR_ERROR);
+- core_scr_write(SCR_ERROR, val);
++ sata_dwc_scr_read(&ap->link, SCR_ERROR, &val);
++ sata_dwc_scr_write(&ap->link, SCR_ERROR, val);
+ }
+
+ static void clear_interrupt_bit(struct sata_dwc_device *hsdev, u32 bit)
+ {
+- out_le32(&hsdev->sata_dwc_regs->intpr,
+- in_le32(&hsdev->sata_dwc_regs->intpr));
++ sata_dwc_writel(&hsdev->sata_dwc_regs->intpr,
++ sata_dwc_readl(&hsdev->sata_dwc_regs->intpr));
+ }
+
+ static u32 qcmd_tag_to_mask(u8 tag)
+@@ -412,7 +465,7 @@ static void sata_dwc_error_intr(struct ata_port *ap,
+
+ ata_ehi_clear_desc(ehi);
+
+- serror = core_scr_read(SCR_ERROR);
++ sata_dwc_scr_read(&ap->link, SCR_ERROR, &serror);
+ status = ap->ops->sff_check_status(ap);
+
+ tag = ap->link.active_tag;
+@@ -423,7 +476,7 @@ static void sata_dwc_error_intr(struct ata_port *ap,
+ hsdevp->dma_pending[tag], hsdevp->cmd_issued[tag]);
+
+ /* Clear error register and interrupt bit */
+- clear_serror();
++ clear_serror(ap);
+ clear_interrupt_bit(hsdev, SATA_DWC_INTPR_ERR);
+
+ /* This is the only error happening now. TODO check for exact error */
+@@ -462,12 +515,12 @@ static irqreturn_t sata_dwc_isr(int irq, void *dev_instance)
+ int handled, num_processed, port = 0;
+ uint intpr, sactive, sactive2, tag_mask;
+ struct sata_dwc_device_port *hsdevp;
+- host_pvt.sata_dwc_sactive_issued = 0;
++ hsdev->sactive_issued = 0;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ /* Read the interrupt register */
+- intpr = in_le32(&hsdev->sata_dwc_regs->intpr);
++ intpr = sata_dwc_readl(&hsdev->sata_dwc_regs->intpr);
+
+ ap = host->ports[port];
+ hsdevp = HSDEVP_FROM_AP(ap);
+@@ -486,12 +539,12 @@ static irqreturn_t sata_dwc_isr(int irq, void *dev_instance)
+ if (intpr & SATA_DWC_INTPR_NEWFP) {
+ clear_interrupt_bit(hsdev, SATA_DWC_INTPR_NEWFP);
+
+- tag = (u8)(in_le32(&hsdev->sata_dwc_regs->fptagr));
++ tag = (u8)(sata_dwc_readl(&hsdev->sata_dwc_regs->fptagr));
+ dev_dbg(ap->dev, "%s: NEWFP tag=%d\n", __func__, tag);
+ if (hsdevp->cmd_issued[tag] != SATA_DWC_CMD_ISSUED_PEND)
+ dev_warn(ap->dev, "CMD tag=%d not pending?\n", tag);
+
+- host_pvt.sata_dwc_sactive_issued |= qcmd_tag_to_mask(tag);
++ hsdev->sactive_issued |= qcmd_tag_to_mask(tag);
+
+ qc = ata_qc_from_tag(ap, tag);
+ /*
+@@ -505,11 +558,11 @@ static irqreturn_t sata_dwc_isr(int irq, void *dev_instance)
+ handled = 1;
+ goto DONE;
+ }
+- sactive = core_scr_read(SCR_ACTIVE);
+- tag_mask = (host_pvt.sata_dwc_sactive_issued | sactive) ^ sactive;
++ sata_dwc_scr_read(&ap->link, SCR_ACTIVE, &sactive);
++ tag_mask = (hsdev->sactive_issued | sactive) ^ sactive;
+
+ /* If no sactive issued and tag_mask is zero then this is not NCQ */
+- if (host_pvt.sata_dwc_sactive_issued == 0 && tag_mask == 0) {
++ if (hsdev->sactive_issued == 0 && tag_mask == 0) {
+ if (ap->link.active_tag == ATA_TAG_POISON)
+ tag = 0;
+ else
+@@ -579,22 +632,19 @@ DRVSTILLBUSY:
+ */
+
+ /* process completed commands */
+- sactive = core_scr_read(SCR_ACTIVE);
+- tag_mask = (host_pvt.sata_dwc_sactive_issued | sactive) ^ sactive;
++ sata_dwc_scr_read(&ap->link, SCR_ACTIVE, &sactive);
++ tag_mask = (hsdev->sactive_issued | sactive) ^ sactive;
+
+- if (sactive != 0 || (host_pvt.sata_dwc_sactive_issued) > 1 || \
+- tag_mask > 1) {
++ if (sactive != 0 || hsdev->sactive_issued > 1 || tag_mask > 1) {
+ dev_dbg(ap->dev,
+ "%s NCQ:sactive=0x%08x sactive_issued=0x%08x tag_mask=0x%08x\n",
+- __func__, sactive, host_pvt.sata_dwc_sactive_issued,
+- tag_mask);
++ __func__, sactive, hsdev->sactive_issued, tag_mask);
+ }
+
+- if ((tag_mask | (host_pvt.sata_dwc_sactive_issued)) != \
+- (host_pvt.sata_dwc_sactive_issued)) {
++ if ((tag_mask | hsdev->sactive_issued) != hsdev->sactive_issued) {
+ dev_warn(ap->dev,
+- "Bad tag mask? sactive=0x%08x (host_pvt.sata_dwc_sactive_issued)=0x%08x tag_mask=0x%08x\n",
+- sactive, host_pvt.sata_dwc_sactive_issued, tag_mask);
++ "Bad tag mask? sactive=0x%08x sactive_issued=0x%08x tag_mask=0x%08x\n",
++ sactive, hsdev->sactive_issued, tag_mask);
+ }
+
+ /* read just to clear ... not bad if currently still busy */
+@@ -656,7 +706,7 @@ STILLBUSY:
+ * we were processing --we read status as part of processing a completed
+ * command).
+ */
+- sactive2 = core_scr_read(SCR_ACTIVE);
++ sata_dwc_scr_read(&ap->link, SCR_ACTIVE, &sactive2);
+ if (sactive2 != sactive) {
+ dev_dbg(ap->dev,
+ "More completed - sactive=0x%x sactive2=0x%x\n",
+@@ -672,15 +722,14 @@ DONE:
+ static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag)
+ {
+ struct sata_dwc_device *hsdev = HSDEV_FROM_HSDEVP(hsdevp);
++ u32 dmacr = sata_dwc_readl(&hsdev->sata_dwc_regs->dmacr);
+
+ if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_RX) {
+- out_le32(&(hsdev->sata_dwc_regs->dmacr),
+- SATA_DWC_DMACR_RX_CLEAR(
+- in_le32(&(hsdev->sata_dwc_regs->dmacr))));
++ dmacr = SATA_DWC_DMACR_RX_CLEAR(dmacr);
++ sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr, dmacr);
+ } else if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX) {
+- out_le32(&(hsdev->sata_dwc_regs->dmacr),
+- SATA_DWC_DMACR_TX_CLEAR(
+- in_le32(&(hsdev->sata_dwc_regs->dmacr))));
++ dmacr = SATA_DWC_DMACR_TX_CLEAR(dmacr);
++ sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr, dmacr);
+ } else {
+ /*
+ * This should not happen, it indicates the driver is out of
+@@ -688,10 +737,9 @@ static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag)
+ */
+ dev_err(hsdev->dev,
+ "%s DMA protocol RX and TX DMA not pending tag=0x%02x pending=%d dmacr: 0x%08x\n",
+- __func__, tag, hsdevp->dma_pending[tag],
+- in_le32(&hsdev->sata_dwc_regs->dmacr));
+- out_le32(&(hsdev->sata_dwc_regs->dmacr),
+- SATA_DWC_DMACR_TXRXCH_CLEAR);
++ __func__, tag, hsdevp->dma_pending[tag], dmacr);
++ sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
++ SATA_DWC_DMACR_TXRXCH_CLEAR);
+ }
+ }
+
+@@ -716,7 +764,7 @@ static void sata_dwc_dma_xfer_complete(struct ata_port *ap, u32 check_status)
+ __func__, qc->tag, qc->tf.command,
+ get_dma_dir_descript(qc->dma_dir),
+ get_prot_descript(qc->tf.protocol),
+- in_le32(&(hsdev->sata_dwc_regs->dmacr)));
++ sata_dwc_readl(&hsdev->sata_dwc_regs->dmacr));
+ }
+ #endif
+
+@@ -725,7 +773,7 @@ static void sata_dwc_dma_xfer_complete(struct ata_port *ap, u32 check_status)
+ dev_err(ap->dev,
+ "%s DMA protocol RX and TX DMA not pending dmacr: 0x%08x\n",
+ __func__,
+- in_le32(&(hsdev->sata_dwc_regs->dmacr)));
++ sata_dwc_readl(&hsdev->sata_dwc_regs->dmacr));
+ }
+
+ hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_NONE;
+@@ -742,8 +790,9 @@ static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc,
+ u8 status = 0;
+ u32 mask = 0x0;
+ u8 tag = qc->tag;
++ struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+ struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+- host_pvt.sata_dwc_sactive_queued = 0;
++ hsdev->sactive_queued = 0;
+ dev_dbg(ap->dev, "%s checkstatus? %x\n", __func__, check_status);
+
+ if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX)
+@@ -756,10 +805,8 @@ static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc,
+
+ /* clear active bit */
+ mask = (~(qcmd_tag_to_mask(tag)));
+- host_pvt.sata_dwc_sactive_queued = (host_pvt.sata_dwc_sactive_queued) \
+- & mask;
+- host_pvt.sata_dwc_sactive_issued = (host_pvt.sata_dwc_sactive_issued) \
+- & mask;
++ hsdev->sactive_queued = hsdev->sactive_queued & mask;
++ hsdev->sactive_issued = hsdev->sactive_issued & mask;
+ ata_qc_complete(qc);
+ return 0;
+ }
+@@ -767,54 +814,62 @@ static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc,
+ static void sata_dwc_enable_interrupts(struct sata_dwc_device *hsdev)
+ {
+ /* Enable selective interrupts by setting the interrupt maskregister*/
+- out_le32(&hsdev->sata_dwc_regs->intmr,
+- SATA_DWC_INTMR_ERRM |
+- SATA_DWC_INTMR_NEWFPM |
+- SATA_DWC_INTMR_PMABRTM |
+- SATA_DWC_INTMR_DMATM);
++ sata_dwc_writel(&hsdev->sata_dwc_regs->intmr,
++ SATA_DWC_INTMR_ERRM |
++ SATA_DWC_INTMR_NEWFPM |
++ SATA_DWC_INTMR_PMABRTM |
++ SATA_DWC_INTMR_DMATM);
+ /*
+ * Unmask the error bits that should trigger an error interrupt by
+ * setting the error mask register.
+ */
+- out_le32(&hsdev->sata_dwc_regs->errmr, SATA_DWC_SERROR_ERR_BITS);
++ sata_dwc_writel(&hsdev->sata_dwc_regs->errmr, SATA_DWC_SERROR_ERR_BITS);
+
+ dev_dbg(hsdev->dev, "%s: INTMR = 0x%08x, ERRMR = 0x%08x\n",
+- __func__, in_le32(&hsdev->sata_dwc_regs->intmr),
+- in_le32(&hsdev->sata_dwc_regs->errmr));
++ __func__, sata_dwc_readl(&hsdev->sata_dwc_regs->intmr),
++ sata_dwc_readl(&hsdev->sata_dwc_regs->errmr));
+ }
+
+-static bool sata_dwc_dma_filter(struct dma_chan *chan, void *param)
++static void sata_dwc_setup_port(struct ata_ioports *port, void __iomem *base)
+ {
+- struct sata_dwc_device_port *hsdevp = param;
+- struct dw_dma_slave *dws = hsdevp->dws;
++ port->cmd_addr = base + 0x00;
++ port->data_addr = base + 0x00;
+
+- if (dws->dma_dev != chan->device->dev)
+- return false;
++ port->error_addr = base + 0x04;
++ port->feature_addr = base + 0x04;
+
+- chan->private = dws;
+- return true;
+-}
++ port->nsect_addr = base + 0x08;
+
+-static void sata_dwc_setup_port(struct ata_ioports *port, unsigned long base)
+-{
+- port->cmd_addr = (void __iomem *)base + 0x00;
+- port->data_addr = (void __iomem *)base + 0x00;
++ port->lbal_addr = base + 0x0c;
++ port->lbam_addr = base + 0x10;
++ port->lbah_addr = base + 0x14;
+
+- port->error_addr = (void __iomem *)base + 0x04;
+- port->feature_addr = (void __iomem *)base + 0x04;
++ port->device_addr = base + 0x18;
++ port->command_addr = base + 0x1c;
++ port->status_addr = base + 0x1c;
+
+- port->nsect_addr = (void __iomem *)base + 0x08;
++ port->altstatus_addr = base + 0x20;
++ port->ctl_addr = base + 0x20;
++}
++
++static int sata_dwc_dma_get_channel(struct sata_dwc_device_port *hsdevp)
++{
++ struct sata_dwc_device *hsdev = hsdevp->hsdev;
++ struct device *dev = hsdev->dev;
+
+- port->lbal_addr = (void __iomem *)base + 0x0c;
+- port->lbam_addr = (void __iomem *)base + 0x10;
+- port->lbah_addr = (void __iomem *)base + 0x14;
++#ifdef CONFIG_SATA_DWC_OLD_DMA
++ if (!of_find_property(dev->of_node, "dmas", NULL))
++ return sata_dwc_dma_get_channel_old(hsdevp);
++#endif
+
+- port->device_addr = (void __iomem *)base + 0x18;
+- port->command_addr = (void __iomem *)base + 0x1c;
+- port->status_addr = (void __iomem *)base + 0x1c;
++ hsdevp->chan = dma_request_chan(dev, "sata-dma");
++ if (IS_ERR(hsdevp->chan)) {
++ dev_err(dev, "failed to allocate dma channel: %ld\n",
++ PTR_ERR(hsdevp->chan));
++ return PTR_ERR(hsdevp->chan);
++ }
+
+- port->altstatus_addr = (void __iomem *)base + 0x20;
+- port->ctl_addr = (void __iomem *)base + 0x20;
++ return 0;
+ }
+
+ /*
+@@ -829,7 +884,6 @@ static int sata_dwc_port_start(struct ata_port *ap)
+ struct sata_dwc_device *hsdev;
+ struct sata_dwc_device_port *hsdevp = NULL;
+ struct device *pdev;
+- dma_cap_mask_t mask;
+ int i;
+
+ hsdev = HSDEV_FROM_AP(ap);
+@@ -853,20 +907,13 @@ static int sata_dwc_port_start(struct ata_port *ap)
+ }
+ hsdevp->hsdev = hsdev;
+
+- hsdevp->dws = &sata_dwc_dma_dws;
+- hsdevp->dws->dma_dev = hsdev->dev;
+-
+- dma_cap_zero(mask);
+- dma_cap_set(DMA_SLAVE, mask);
++ err = sata_dwc_dma_get_channel(hsdevp);
++ if (err)
++ goto CLEANUP_ALLOC;
+
+- /* Acquire DMA channel */
+- hsdevp->chan = dma_request_channel(mask, sata_dwc_dma_filter, hsdevp);
+- if (!hsdevp->chan) {
+- dev_err(hsdev->dev, "%s: dma channel unavailable\n",
+- __func__);
+- err = -EAGAIN;
++ err = phy_power_on(hsdev->phy);
++ if (err)
+ goto CLEANUP_ALLOC;
+- }
+
+ for (i = 0; i < SATA_DWC_QCMD_MAX; i++)
+ hsdevp->cmd_issued[i] = SATA_DWC_CMD_ISSUED_NOT;
+@@ -877,18 +924,18 @@ static int sata_dwc_port_start(struct ata_port *ap)
+ if (ap->port_no == 0) {
+ dev_dbg(ap->dev, "%s: clearing TXCHEN, RXCHEN in DMAC\n",
+ __func__);
+- out_le32(&hsdev->sata_dwc_regs->dmacr,
+- SATA_DWC_DMACR_TXRXCH_CLEAR);
++ sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
++ SATA_DWC_DMACR_TXRXCH_CLEAR);
+
+ dev_dbg(ap->dev, "%s: setting burst size in DBTSR\n",
+ __func__);
+- out_le32(&hsdev->sata_dwc_regs->dbtsr,
+- (SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) |
+- SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT)));
++ sata_dwc_writel(&hsdev->sata_dwc_regs->dbtsr,
++ (SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) |
++ SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT)));
+ }
+
+ /* Clear any error bits before libata starts issuing commands */
+- clear_serror();
++ clear_serror(ap);
+ ap->private_data = hsdevp;
+ dev_dbg(ap->dev, "%s: done\n", __func__);
+ return 0;
+@@ -903,11 +950,13 @@ CLEANUP:
+ static void sata_dwc_port_stop(struct ata_port *ap)
+ {
+ struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
++ struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+
+ dev_dbg(ap->dev, "%s: ap->id = %d\n", __func__, ap->print_id);
+
+- dmaengine_terminate_all(hsdevp->chan);
++ dmaengine_terminate_sync(hsdevp->chan);
+ dma_release_channel(hsdevp->chan);
++ phy_power_off(hsdev->phy);
+
+ kfree(hsdevp);
+ ap->private_data = NULL;
+@@ -924,22 +973,20 @@ static void sata_dwc_exec_command_by_tag(struct ata_port *ap,
+ struct ata_taskfile *tf,
+ u8 tag, u32 cmd_issued)
+ {
+- unsigned long flags;
+ struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+
+ dev_dbg(ap->dev, "%s cmd(0x%02x): %s tag=%d\n", __func__, tf->command,
+ ata_get_cmd_descript(tf->command), tag);
+
+- spin_lock_irqsave(&ap->host->lock, flags);
+ hsdevp->cmd_issued[tag] = cmd_issued;
+- spin_unlock_irqrestore(&ap->host->lock, flags);
++
+ /*
+ * Clear SError before executing a new command.
+ * sata_dwc_scr_write and read can not be used here. Clearing the PM
+ * managed SError register for the disk needs to be done before the
+ * task file is loaded.
+ */
+- clear_serror();
++ clear_serror(ap);
+ ata_sff_exec_command(ap, tf);
+ }
+
+@@ -992,18 +1039,18 @@ static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag)
+ sata_dwc_tf_dump(ap, &qc->tf);
+
+ if (start_dma) {
+- reg = core_scr_read(SCR_ERROR);
++ sata_dwc_scr_read(&ap->link, SCR_ERROR, &reg);
+ if (reg & SATA_DWC_SERROR_ERR_BITS) {
+ dev_err(ap->dev, "%s: ****** SError=0x%08x ******\n",
+ __func__, reg);
+ }
+
+ if (dir == DMA_TO_DEVICE)
+- out_le32(&hsdev->sata_dwc_regs->dmacr,
+- SATA_DWC_DMACR_TXCHEN);
++ sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
++ SATA_DWC_DMACR_TXCHEN);
+ else
+- out_le32(&hsdev->sata_dwc_regs->dmacr,
+- SATA_DWC_DMACR_RXCHEN);
++ sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
++ SATA_DWC_DMACR_RXCHEN);
+
+ /* Enable AHB DMA transfer on the specified channel */
+ dmaengine_submit(desc);
+@@ -1025,36 +1072,12 @@ static void sata_dwc_bmdma_start(struct ata_queued_cmd *qc)
+ sata_dwc_bmdma_start_by_tag(qc, tag);
+ }
+
+-/*
+- * Function : sata_dwc_qc_prep_by_tag
+- * arguments : ata_queued_cmd *qc, u8 tag
+- * Return value : None
+- * qc_prep for a particular queued command based on tag
+- */
+-static void sata_dwc_qc_prep_by_tag(struct ata_queued_cmd *qc, u8 tag)
+-{
+- struct dma_async_tx_descriptor *desc;
+- struct ata_port *ap = qc->ap;
+- struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+-
+- dev_dbg(ap->dev, "%s: port=%d dma dir=%s n_elem=%d\n",
+- __func__, ap->port_no, get_dma_dir_descript(qc->dma_dir),
+- qc->n_elem);
+-
+- desc = dma_dwc_xfer_setup(qc);
+- if (!desc) {
+- dev_err(ap->dev, "%s: dma_dwc_xfer_setup returns NULL\n",
+- __func__);
+- return;
+- }
+- hsdevp->desc[tag] = desc;
+-}
+-
+ static unsigned int sata_dwc_qc_issue(struct ata_queued_cmd *qc)
+ {
+ u32 sactive;
+ u8 tag = qc->tag;
+ struct ata_port *ap = qc->ap;
++ struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+
+ #ifdef DEBUG_NCQ
+ if (qc->tag > 0 || ap->link.sactive > 1)
+@@ -1068,47 +1091,33 @@ static unsigned int sata_dwc_qc_issue(struct ata_queued_cmd *qc)
+
+ if (!ata_is_ncq(qc->tf.protocol))
+ tag = 0;
+- sata_dwc_qc_prep_by_tag(qc, tag);
++
++ if (ata_is_dma(qc->tf.protocol)) {
++ hsdevp->desc[tag] = dma_dwc_xfer_setup(qc);
++ if (!hsdevp->desc[tag])
++ return AC_ERR_SYSTEM;
++ } else {
++ hsdevp->desc[tag] = NULL;
++ }
+
+ if (ata_is_ncq(qc->tf.protocol)) {
+- sactive = core_scr_read(SCR_ACTIVE);
++ sata_dwc_scr_read(&ap->link, SCR_ACTIVE, &sactive);
+ sactive |= (0x00000001 << tag);
+- core_scr_write(SCR_ACTIVE, sactive);
++ sata_dwc_scr_write(&ap->link, SCR_ACTIVE, sactive);
+
+ dev_dbg(qc->ap->dev,
+ "%s: tag=%d ap->link.sactive = 0x%08x sactive=0x%08x\n",
+ __func__, tag, qc->ap->link.sactive, sactive);
+
+ ap->ops->sff_tf_load(ap, &qc->tf);
+- sata_dwc_exec_command_by_tag(ap, &qc->tf, qc->tag,
++ sata_dwc_exec_command_by_tag(ap, &qc->tf, tag,
+ SATA_DWC_CMD_ISSUED_PEND);
+ } else {
+- ata_sff_qc_issue(qc);
++ return ata_bmdma_qc_issue(qc);
+ }
+ return 0;
+ }
+
+-/*
+- * Function : sata_dwc_qc_prep
+- * arguments : ata_queued_cmd *qc
+- * Return value : None
+- * qc_prep for a particular queued command
+- */
+-
+-static void sata_dwc_qc_prep(struct ata_queued_cmd *qc)
+-{
+- if ((qc->dma_dir == DMA_NONE) || (qc->tf.protocol == ATA_PROT_PIO))
+- return;
+-
+-#ifdef DEBUG_NCQ
+- if (qc->tag > 0)
+- dev_info(qc->ap->dev, "%s: qc->tag=%d ap->active_tag=0x%08x\n",
+- __func__, qc->tag, qc->ap->link.active_tag);
+-
+- return ;
+-#endif
+-}
+-
+ static void sata_dwc_error_handler(struct ata_port *ap)
+ {
+ ata_sff_error_handler(ap);
+@@ -1125,17 +1134,22 @@ static int sata_dwc_hardreset(struct ata_link *link, unsigned int *class,
+ sata_dwc_enable_interrupts(hsdev);
+
+ /* Reconfigure the DMA control register */
+- out_le32(&hsdev->sata_dwc_regs->dmacr,
+- SATA_DWC_DMACR_TXRXCH_CLEAR);
++ sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
++ SATA_DWC_DMACR_TXRXCH_CLEAR);
+
+ /* Reconfigure the DMA Burst Transaction Size register */
+- out_le32(&hsdev->sata_dwc_regs->dbtsr,
+- SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) |
+- SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT));
++ sata_dwc_writel(&hsdev->sata_dwc_regs->dbtsr,
++ SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) |
++ SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT));
+
+ return ret;
+ }
+
++static void sata_dwc_dev_select(struct ata_port *ap, unsigned int device)
++{
++ /* SATA DWC is master only */
++}
++
+ /*
+ * scsi mid-layer and libata interface structures
+ */
+@@ -1148,7 +1162,13 @@ static struct scsi_host_template sata_dwc_sht = {
+ */
+ .sg_tablesize = LIBATA_MAX_PRD,
+ /* .can_queue = ATA_MAX_QUEUE, */
+- .dma_boundary = ATA_DMA_BOUNDARY,
++ /*
++ * Make sure a LLI block is not created that will span 8K max FIS
++ * boundary. If the block spans such a FIS boundary, there is a chance
++ * that a DMA burst will cross that boundary -- this results in an
++ * error in the host controller.
++ */
++ .dma_boundary = 0x1fff /* ATA_DMA_BOUNDARY */,
+ };
+
+ static struct ata_port_operations sata_dwc_ops = {
+@@ -1157,7 +1177,6 @@ static struct ata_port_operations sata_dwc_ops = {
+ .error_handler = sata_dwc_error_handler,
+ .hardreset = sata_dwc_hardreset,
+
+- .qc_prep = sata_dwc_qc_prep,
+ .qc_issue = sata_dwc_qc_issue,
+
+ .scr_read = sata_dwc_scr_read,
+@@ -1166,6 +1185,8 @@ static struct ata_port_operations sata_dwc_ops = {
+ .port_start = sata_dwc_port_start,
+ .port_stop = sata_dwc_port_stop,
+
++ .sff_dev_select = sata_dwc_dev_select,
++
+ .bmdma_setup = sata_dwc_bmdma_setup,
+ .bmdma_start = sata_dwc_bmdma_start,
+ };
+@@ -1184,13 +1205,14 @@ static int sata_dwc_probe(struct platform_device *ofdev)
+ struct sata_dwc_device *hsdev;
+ u32 idr, versionr;
+ char *ver = (char *)&versionr;
+- u8 __iomem *base;
++ void __iomem *base;
+ int err = 0;
+ int irq;
+ struct ata_host *host;
+ struct ata_port_info pi = sata_dwc_port_info[0];
+ const struct ata_port_info *ppi[] = { &pi, NULL };
+ struct device_node *np = ofdev->dev.of_node;
++ struct resource *res;
+
+ /* Allocate DWC SATA device */
+ host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_DWC_MAX_PORTS);
+@@ -1201,57 +1223,33 @@ static int sata_dwc_probe(struct platform_device *ofdev)
+ host->private_data = hsdev;
+
+ /* Ioremap SATA registers */
+- base = of_iomap(np, 0);
+- if (!base) {
++ res = platform_get_resource(ofdev, IORESOURCE_MEM, 0);
++ base = devm_ioremap_resource(&ofdev->dev, res);
++ if (IS_ERR(base)) {
+ dev_err(&ofdev->dev,
+ "ioremap failed for SATA register address\n");
+- return -ENODEV;
++ return PTR_ERR(base);
+ }
+- hsdev->reg_base = base;
+ dev_dbg(&ofdev->dev, "ioremap done for SATA register address\n");
+
+ /* Synopsys DWC SATA specific Registers */
+- hsdev->sata_dwc_regs = (void *__iomem)(base + SATA_DWC_REG_OFFSET);
++ hsdev->sata_dwc_regs = base + SATA_DWC_REG_OFFSET;
++ hsdev->dmadr = res->start + SATA_DWC_REG_OFFSET + offsetof(struct sata_dwc_regs, dmadr);
+
+ /* Setup port */
+ host->ports[0]->ioaddr.cmd_addr = base;
+ host->ports[0]->ioaddr.scr_addr = base + SATA_DWC_SCR_OFFSET;
+- host_pvt.scr_addr_sstatus = base + SATA_DWC_SCR_OFFSET;
+- sata_dwc_setup_port(&host->ports[0]->ioaddr, (unsigned long)base);
++ sata_dwc_setup_port(&host->ports[0]->ioaddr, base);
+
+ /* Read the ID and Version Registers */
+- idr = in_le32(&hsdev->sata_dwc_regs->idr);
+- versionr = in_le32(&hsdev->sata_dwc_regs->versionr);
++ idr = sata_dwc_readl(&hsdev->sata_dwc_regs->idr);
++ versionr = sata_dwc_readl(&hsdev->sata_dwc_regs->versionr);
+ dev_notice(&ofdev->dev, "id %d, controller version %c.%c%c\n",
+ idr, ver[0], ver[1], ver[2]);
+
+- /* Get SATA DMA interrupt number */
+- hsdev->dma->irq = irq_of_parse_and_map(np, 1);
+- if (hsdev->dma->irq == NO_IRQ) {
+- dev_err(&ofdev->dev, "no SATA DMA irq\n");
+- err = -ENODEV;
+- goto error_iomap;
+- }
+-
+- /* Get physical SATA DMA register base address */
+- hsdev->dma->regs = of_iomap(np, 1);
+- if (!hsdev->dma->regs) {
+- dev_err(&ofdev->dev,
+- "ioremap failed for AHBDMA register address\n");
+- err = -ENODEV;
+- goto error_iomap;
+- }
+-
+ /* Save dev for later use in dev_xxx() routines */
+ hsdev->dev = &ofdev->dev;
+
+- hsdev->dma->dev = &ofdev->dev;
+-
+- /* Initialize AHB DMAC */
+- err = dw_dma_probe(hsdev->dma, NULL);
+- if (err)
+- goto error_dma_iomap;
+-
+ /* Enable SATA Interrupts */
+ sata_dwc_enable_interrupts(hsdev);
+
+@@ -1263,6 +1261,25 @@ static int sata_dwc_probe(struct platform_device *ofdev)
+ goto error_out;
+ }
+
++#ifdef CONFIG_SATA_DWC_OLD_DMA
++ if (!of_find_property(np, "dmas", NULL)) {
++ err = sata_dwc_dma_init_old(ofdev, hsdev);
++ if (err)
++ goto error_out;
++ }
++#endif
++
++ hsdev->phy = devm_phy_optional_get(hsdev->dev, "sata-phy");
++ if (IS_ERR(hsdev->phy)) {
++ err = PTR_ERR(hsdev->phy);
++ hsdev->phy = NULL;
++ goto error_out;
++ }
++
++ err = phy_init(hsdev->phy);
++ if (err)
++ goto error_out;
++
+ /*
+ * Now, register with libATA core, this will also initiate the
+ * device discovery process, invoking our port_start() handler &
+@@ -1276,12 +1293,7 @@ static int sata_dwc_probe(struct platform_device *ofdev)
+ return 0;
+
+ error_out:
+- /* Free SATA DMA resources */
+- dw_dma_remove(hsdev->dma);
+-error_dma_iomap:
+- iounmap(hsdev->dma->regs);
+-error_iomap:
+- iounmap(base);
++ phy_exit(hsdev->phy);
+ return err;
+ }
+
+@@ -1293,11 +1305,13 @@ static int sata_dwc_remove(struct platform_device *ofdev)
+
+ ata_host_detach(host);
+
++ phy_exit(hsdev->phy);
++
++#ifdef CONFIG_SATA_DWC_OLD_DMA
+ /* Free SATA DMA resources */
+- dw_dma_remove(hsdev->dma);
++ sata_dwc_dma_exit_old(hsdev);
++#endif
+
+- iounmap(hsdev->dma->regs);
+- iounmap(hsdev->reg_base);
+ dev_dbg(&ofdev->dev, "done\n");
+ return 0;
+ }
+--
+2.8.1
+