aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/diag.sh6
-rw-r--r--target/linux/ramips/base-files/etc/hotplug.d/usb/10-motion1
-rwxr-xr-xtarget/linux/ramips/base-files/etc/uci-defaults/01_leds5
-rwxr-xr-xtarget/linux/ramips/base-files/etc/uci-defaults/02_network5
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh6
-rw-r--r--target/linux/ramips/dts/WHR-300HP2.dts138
-rw-r--r--target/linux/ramips/dts/WHR-600D.dts134
-rw-r--r--target/linux/ramips/image/Makefile5
8 files changed, 300 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index bfe53e1d9e..c6e6004245 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -120,6 +120,12 @@ get_status_led() {
whr-g300n)
status_led="whr-g300n:green:router"
;;
+ whr-300hp2)
+ status_led="buffalo:green:status"
+ ;;
+ whr-600d)
+ status_led="buffalo:green:status"
+ ;;
wli-tx4-ag300n)
status_led="buffalo:blue:power"
;;
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/usb/10-motion b/target/linux/ramips/base-files/etc/hotplug.d/usb/10-motion
new file mode 100644
index 0000000000..557698b1a2
--- /dev/null
+++ b/target/linux/ramips/base-files/etc/hotplug.d/usb/10-motion
@@ -0,0 +1 @@
+[ "$ACTION" == "motion" ] && logger webcam motion event
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
index 7f9ca40722..44951d8e23 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
@@ -145,6 +145,11 @@ case $board in
ucidef_set_led_netdev "eth" "Network" "asus:white:back" "eth0"
set_wifi_led "asus:blue:wifi"
;;
+ whr-300hp2 |\
+ whr-600d)
+ ucidef_set_led_default "power" "power" "buffalo:green:power" "1"
+ ucidef_set_led_default "router" "router" "buffalo:green:router" "1"
+ ;;
esac
ucidef_commit_leds
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index 034d6e61e1..9026700ac9 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -146,6 +146,11 @@ ramips_setup_interfaces()
ucidef_set_interface_lan "eth0"
;;
+ whr-300hp2 |\
+ whr-600d)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ;;
+
*)
RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350)"`
if [ -n "${RT3X5X}" ]; then
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 589b208f36..0315074f10 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -208,6 +208,12 @@ ramips_board_detect() {
*"W502U")
name="w502u"
;;
+ *"WHR-300HP2")
+ name="whr-300hp2"
+ ;;
+ *"WHR-600D")
+ name="whr-600d"
+ ;;
*"WHR-G300N")
name="whr-g300n"
;;
diff --git a/target/linux/ramips/dts/WHR-300HP2.dts b/target/linux/ramips/dts/WHR-300HP2.dts
new file mode 100644
index 0000000000..1a0b8c312c
--- /dev/null
+++ b/target/linux/ramips/dts/WHR-300HP2.dts
@@ -0,0 +1,138 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+ compatible = "ralink,mt7620a-soc";
+ model = "Buffalo WHR-300HP2";
+
+ palmbus@10000000 {
+ gpio2: gpio@660 {
+ status = "okay";
+ };
+
+ spi@b00 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "en25q64";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "s25fl064k";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x6b0000>;
+ };
+
+ partition@700000 {
+ label = "usercfg";
+ reg = <0x700000 0x100000>;
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+ pa {
+ ralink,group = "pa";
+ ralink,function = "pa";
+ };
+ };
+ };
+
+ ethernet@10100000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+
+ ralink,port-map = "llllw";
+ };
+
+ gsw@10110000 {
+ ralink,port4 = "ephy";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ power {
+ label = "buffalo:red:power";
+ gpios = <&gpio0 7 1>;
+ };
+ status {
+ label = "buffalo:green:status";
+ gpios = <&gpio0 8 1>;
+ };
+ power2 {
+ label = "buffalo:green:power";
+ gpios = <&gpio0 9 1>;
+ };
+ status2 {
+ label = "buffalo:orange:status";
+ gpios = <&gpio0 10 1>;
+ };
+ internet {
+ label = "buffalo:green:internet";
+ gpios = <&gpio2 17 1>;
+ };
+ router {
+ label = "buffalo:green:router";
+ gpios = <&gpio2 18 1>;
+ };
+ router2 {
+ label = "buffalo:orange:router";
+ gpios = <&gpio2 19 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ s1 {
+ label = "reset";
+ gpios = <&gpio2 12 1>;
+ linux,code = <0x100>;
+ };
+ s2 {
+ label = "aoss";
+ gpios = <&gpio2 13 1>;
+ linux,code = <0x101>;
+ };
+ s3 {
+ label = "ap";
+ gpios = <&gpio2 14 1>;
+ linux,code = <0x102>;
+ };
+ s4 {
+ label = "bridge";
+ gpios = <&gpio2 15 1>;
+ linux,code = <0x103>;
+ };
+ };
+};
diff --git a/target/linux/ramips/dts/WHR-600D.dts b/target/linux/ramips/dts/WHR-600D.dts
new file mode 100644
index 0000000000..00d9d03093
--- /dev/null
+++ b/target/linux/ramips/dts/WHR-600D.dts
@@ -0,0 +1,134 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+ compatible = "ralink,mt7620a-soc";
+ model = "Buffalo WHR-600D";
+
+ palmbus@10000000 {
+ gpio2: gpio@660 {
+ status = "okay";
+ };
+
+ spi@b00 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "en25q64";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "mx25l6405d";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x6b0000>;
+ };
+
+ partition@700000 {
+ label = "usercfg";
+ reg = <0x700000 0x100000>;
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ ethernet@10100000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+
+ ralink,port-map = "llllw";
+ };
+
+ gsw@10110000 {
+ ralink,port4 = "ephy";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ power {
+ label = "buffalo:red:power";
+ gpios = <&gpio0 7 1>;
+ };
+ status {
+ label = "buffalo:green:status";
+ gpios = <&gpio0 8 1>;
+ };
+ power2 {
+ label = "buffalo:green:power";
+ gpios = <&gpio0 9 1>;
+ };
+ status2 {
+ label = "buffalo:orange:status";
+ gpios = <&gpio0 10 1>;
+ };
+ internet {
+ label = "buffalo:green:internet";
+ gpios = <&gpio2 17 1>;
+ };
+ router {
+ label = "buffalo:green:router";
+ gpios = <&gpio2 18 1>;
+ };
+ router2 {
+ label = "buffalo:orange:router";
+ gpios = <&gpio2 19 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ s1 {
+ label = "reset";
+ gpios = <&gpio2 12 1>;
+ linux,code = <0x100>;
+ };
+ s2 {
+ label = "aoss";
+ gpios = <&gpio2 13 1>;
+ linux,code = <0x101>;
+ };
+ s3 {
+ label = "ap";
+ gpios = <&gpio2 14 1>;
+ linux,code = <0x102>;
+ };
+ s4 {
+ label = "bridge";
+ gpios = <&gpio2 15 1>;
+ linux,code = <0x103>;
+ };
+ };
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 81f23c7d95..317ffac322 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -614,6 +614,9 @@ Image/Build/Profile/MT7620a=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a,MT7
Image/Build/Profile/MT7620a_MT7610e=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7610e,MT7620a_MT7610e)
Image/Build/Profile/MT7620a_MT7530=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7530,MT7620a_MT7530)
Image/Build/Profile/RP-N53=$(call BuildFirmware/Default8M/$(1),$(1),rp_n53,RP-N53)
+whr_300hp2_mtd_size=7012352
+Image/Build/Profile/WHR-300HP2=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-300hp2,WHR-300HP2,$(whr_300hp2_mtd_size))
+Image/Build/Profile/WHR-600D=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-600d,WHR-600D,$(whr_300hp2_mtd_size))
dlink810l_mtd_size=6881280
Image/Build/Profile/DIR-810L=$(call BuildFirmware/CustomFlash/$(1),$(1),dir-810l,DIR-810L,$(dlink810l_mtd_size))
@@ -624,6 +627,8 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/MT7620a_MT7530,$(1))
$(call Image/Build/Profile/RP-N53,$(1))
$(call Image/Build/Profile/DIR-810L,$(1))
+ $(call Image/Build/Profile/WHR-300HP2,$(1))
+ $(call Image/Build/Profile/WHR-600D,$(1))
endef
endif
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 19:46:26 +0000