aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/brcm63xx/patches-3.9/100-MIPS-bmips-fix-compilation-for-BMIPS5000.patch67
-rw-r--r--target/linux/brcm63xx/patches-3.9/101-MIPS-allow-asm-cpu.h-to-be-included-from-assembly.patch31
-rw-r--r--target/linux/brcm63xx/patches-3.9/102-MIPS-bmips-add-macros-for-testing-the-current-bmips-.patch36
-rw-r--r--target/linux/brcm63xx/patches-3.9/103-MIPS-bmips-change-compile-time-checks-to-runtime-che.patch482
-rw-r--r--target/linux/brcm63xx/patches-3.9/104-MIPS-bmips-merge-CPU-options-into-one-option.patch126
-rw-r--r--target/linux/brcm63xx/patches-3.9/105-MIPS-BCM63XX-let-the-individual-SoCs-select-the-appr.patch72
-rw-r--r--target/linux/brcm63xx/patches-3.9/106-MIPS-bmips-add-a-helper-function-for-registering-smp.patch42
-rw-r--r--target/linux/brcm63xx/patches-3.9/107-MIPS-BCM63XX-always-register-bmips-smp-ops.patch26
-rw-r--r--target/linux/brcm63xx/patches-3.9/108-MIPS-BCM63XX-change-the-guard-to-a-BMIPS4350-check.patch21
-rw-r--r--target/linux/brcm63xx/patches-3.9/109-MIPS-BCM63XX-disable-SMP-also-on-BCM3368.patch36
-rw-r--r--target/linux/brcm63xx/patches-3.9/110-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch (renamed from target/linux/brcm63xx/patches-3.9/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch)0
-rw-r--r--target/linux/brcm63xx/patches-3.9/111-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch (renamed from target/linux/brcm63xx/patches-3.9/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch)0
-rw-r--r--target/linux/brcm63xx/patches-3.9/112-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch (renamed from target/linux/brcm63xx/patches-3.9/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch)0
-rw-r--r--target/linux/brcm63xx/patches-3.9/113-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch (renamed from target/linux/brcm63xx/patches-3.9/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch)0
-rw-r--r--target/linux/brcm63xx/patches-3.9/114-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch (renamed from target/linux/brcm63xx/patches-3.9/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch)12
-rw-r--r--target/linux/brcm63xx/patches-3.9/115-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch (renamed from target/linux/brcm63xx/patches-3.9/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch)0
-rw-r--r--target/linux/brcm63xx/patches-3.9/116-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch (renamed from target/linux/brcm63xx/patches-3.9/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch)0
-rw-r--r--target/linux/brcm63xx/patches-3.9/117-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch (renamed from target/linux/brcm63xx/patches-3.9/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch)9
-rw-r--r--target/linux/brcm63xx/patches-3.9/118-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch (renamed from target/linux/brcm63xx/patches-3.9/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch)0
-rw-r--r--target/linux/brcm63xx/patches-3.9/119-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch (renamed from target/linux/brcm63xx/patches-3.9/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch)0
-rw-r--r--target/linux/brcm63xx/patches-3.9/120-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch (renamed from target/linux/brcm63xx/patches-3.9/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch)0
21 files changed, 953 insertions, 7 deletions
diff --git a/target/linux/brcm63xx/patches-3.9/100-MIPS-bmips-fix-compilation-for-BMIPS5000.patch b/target/linux/brcm63xx/patches-3.9/100-MIPS-bmips-fix-compilation-for-BMIPS5000.patch
new file mode 100644
index 0000000000..6f4763420b
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.9/100-MIPS-bmips-fix-compilation-for-BMIPS5000.patch
@@ -0,0 +1,67 @@
+From d55975b74389b2cf1a38732062ff89303940f6e1 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 29 Jun 2013 11:46:56 +0200
+Subject: [PATCH 01/10] MIPS: bmips: fix compilation for BMIPS5000
+
+Replace the macro names in strings with actual macro invocation.
+
+Fixes the following build error:
+
+ CC arch/mips/kernel/smp-bmips.o
+{standard input}: Assembler messages:
+{standard input}:951: Error: Unrecognized opcode `_ssnop'
+{standard input}:952: Error: Unrecognized opcode `_ssnop'
+(...)
+make[6]: *** [arch/mips/kernel/smp-bmips.o] Error 1
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/include/asm/bmips.h | 28 ++++++++++++++--------------
+ 1 file changed, 14 insertions(+), 14 deletions(-)
+
+--- a/arch/mips/include/asm/bmips.h
++++ b/arch/mips/include/asm/bmips.h
+@@ -70,15 +70,15 @@ static inline unsigned long bmips_read_z
+ ".set noreorder\n"
+ "cache %1, 0(%2)\n"
+ "sync\n"
+- "_ssnop\n"
+- "_ssnop\n"
+- "_ssnop\n"
+- "_ssnop\n"
+- "_ssnop\n"
+- "_ssnop\n"
+- "_ssnop\n"
++ __stringify(___ssnop) "\n"
++ __stringify(___ssnop) "\n"
++ __stringify(___ssnop) "\n"
++ __stringify(___ssnop) "\n"
++ __stringify(___ssnop) "\n"
++ __stringify(___ssnop) "\n"
++ __stringify(___ssnop) "\n"
+ "mfc0 %0, $28, 3\n"
+- "_ssnop\n"
++ __stringify(___ssnop) "\n"
+ ".set pop\n"
+ : "=&r" (ret)
+ : "i" (Index_Load_Tag_S), "r" (ZSCM_REG_BASE + offset)
+@@ -92,13 +92,13 @@ static inline void bmips_write_zscm_reg(
+ ".set push\n"
+ ".set noreorder\n"
+ "mtc0 %0, $28, 3\n"
+- "_ssnop\n"
+- "_ssnop\n"
+- "_ssnop\n"
++ __stringify(___ssnop) "\n"
++ __stringify(___ssnop) "\n"
++ __stringify(___ssnop) "\n"
+ "cache %1, 0(%2)\n"
+- "_ssnop\n"
+- "_ssnop\n"
+- "_ssnop\n"
++ __stringify(___ssnop) "\n"
++ __stringify(___ssnop) "\n"
++ __stringify(___ssnop) "\n"
+ : /* no outputs */
+ : "r" (data),
+ "i" (Index_Store_Tag_S), "r" (ZSCM_REG_BASE + offset)
diff --git a/target/linux/brcm63xx/patches-3.9/101-MIPS-allow-asm-cpu.h-to-be-included-from-assembly.patch b/target/linux/brcm63xx/patches-3.9/101-MIPS-allow-asm-cpu.h-to-be-included-from-assembly.patch
new file mode 100644
index 0000000000..27c3b9eea5
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.9/101-MIPS-allow-asm-cpu.h-to-be-included-from-assembly.patch
@@ -0,0 +1,31 @@
+From 520f4bf75026cc60ba47946331966fb670b39cb0 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Thu, 27 Jun 2013 21:32:41 +0200
+Subject: [PATCH 02/10] MIPS: allow asm/cpu.h to be included from assembly
+
+Add guards around the enum to allow including cpu.h from assembly.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/include/asm/cpu.h | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/arch/mips/include/asm/cpu.h
++++ b/arch/mips/include/asm/cpu.h
+@@ -225,6 +225,8 @@
+
+ #define FPIR_IMP_NONE 0x0000
+
++#if !defined(__ASSEMBLY__)
++
+ enum cpu_type_enum {
+ CPU_UNKNOWN,
+
+@@ -277,6 +279,7 @@ enum cpu_type_enum {
+ CPU_LAST
+ };
+
++#endif /* !__ASSEMBLY */
+
+ /*
+ * ISA Level encodings
diff --git a/target/linux/brcm63xx/patches-3.9/102-MIPS-bmips-add-macros-for-testing-the-current-bmips-.patch b/target/linux/brcm63xx/patches-3.9/102-MIPS-bmips-add-macros-for-testing-the-current-bmips-.patch
new file mode 100644
index 0000000000..af38b35689
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.9/102-MIPS-bmips-add-macros-for-testing-the-current-bmips-.patch
@@ -0,0 +1,36 @@
+From 971b8b3d5101b3bb868e63f3eb96fe69b7110c61 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Thu, 27 Jun 2013 12:40:15 +0200
+Subject: [PATCH 03/10] MIPS: bmips: add macros for testing the current bmips
+ CPU
+
+Makes it easy to make code conditionally compiled for supported CPUs
+without directly relying on #ifdefs.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/include/asm/bmips.h | 11 +++++++++++
+ 1 file changed, 11 insertions(+)
+
+--- a/arch/mips/include/asm/bmips.h
++++ b/arch/mips/include/asm/bmips.h
+@@ -45,8 +45,19 @@
+ #if !defined(__ASSEMBLY__)
+
+ #include <linux/cpumask.h>
++#include <asm/cpu-features.h>
+ #include <asm/r4kcache.h>
+
++#define cpu_is_bmips32() (current_cpu_type() == CPU_BMIPS32)
++#define cpu_is_bmips3300() (IS_ENABLED(CONFIG_CPU_BMIPS3300) && \
++ current_cpu_type() == CPU_BMIPS3300)
++#define cpu_is_bmips4350() (IS_ENABLED(CONFIG_CPU_BMIPS4350) && \
++ current_cpu_type() == CPU_BMIPS4350)
++#define cpu_is_bmips4380() (IS_ENABLED(CONFIG_CPU_BMIPS4380) && \
++ current_cpu_type() == CPU_BMIPS4380)
++#define cpu_is_bmips5000() (IS_ENABLED(CONFIG_CPU_BMIPS5000) && \
++ current_cpu_type() == CPU_BMIPS5000)
++
+ extern struct plat_smp_ops bmips_smp_ops;
+ extern char bmips_reset_nmi_vec;
+ extern char bmips_reset_nmi_vec_end;
diff --git a/target/linux/brcm63xx/patches-3.9/103-MIPS-bmips-change-compile-time-checks-to-runtime-che.patch b/target/linux/brcm63xx/patches-3.9/103-MIPS-bmips-change-compile-time-checks-to-runtime-che.patch
new file mode 100644
index 0000000000..d55189529e
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.9/103-MIPS-bmips-change-compile-time-checks-to-runtime-che.patch
@@ -0,0 +1,482 @@
+From 12594762fcbec024cb424c9b77efb28402651667 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Thu, 27 Jun 2013 21:33:56 +0200
+Subject: [PATCH 04/10] MIPS: bmips: change compile time checks to runtime
+ checks
+
+Allow building for all bmips cpus at the same time by changing ifdefs
+to checks for the cpu type, or adding appropriate checks to the
+assembly.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/kernel/bmips_vec.S | 55 +++++++---
+ arch/mips/kernel/smp-bmips.c | 241 ++++++++++++++++++++++--------------------
+ 2 files changed, 172 insertions(+), 124 deletions(-)
+
+--- a/arch/mips/kernel/bmips_vec.S
++++ b/arch/mips/kernel/bmips_vec.S
+@@ -13,6 +13,7 @@
+ #include <asm/asm.h>
+ #include <asm/asmmacro.h>
+ #include <asm/cacheops.h>
++#include <asm/cpu.h>
+ #include <asm/regdef.h>
+ #include <asm/mipsregs.h>
+ #include <asm/stackframe.h>
+@@ -89,12 +90,18 @@ NESTED(bmips_reset_nmi_vec, PT_SIZE, sp)
+ beqz k0, bmips_smp_entry
+
+ #if defined(CONFIG_CPU_BMIPS5000)
++ mfc0 k0, CP0_PRID
++ li k1, PRID_IMP_BMIPS5000
++ andi k0, 0xff00
++ bne k0, k1, 1f
++
+ /* if we're not on core 0, this must be the SMP boot signal */
+ li k1, (3 << 25)
+ mfc0 k0, $22
+ and k0, k1
+ bnez k0, bmips_smp_entry
+-#endif
++1:
++#endif /* CONFIG_CPU_BMIPS5000 */
+ #endif /* CONFIG_SMP */
+
+ /* nope, it's just a regular NMI */
+@@ -137,7 +144,12 @@ bmips_smp_entry:
+ xori k0, 0x04
+ mtc0 k0, CP0_CONFIG
+
++ mfc0 k0, CP0_PRID
++ andi k0, 0xff00
+ #if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
++ li k1, PRID_IMP_BMIPS43XX
++ bne k0, k1, 2f
++
+ /* initialize CPU1's local I-cache */
+ li k0, 0x80000000
+ li k1, 0x80010000
+@@ -148,14 +160,21 @@ bmips_smp_entry:
+ 1: cache Index_Store_Tag_I, 0(k0)
+ addiu k0, 16
+ bne k0, k1, 1b
+-#elif defined(CONFIG_CPU_BMIPS5000)
++
++ b 3f
++2:
++#endif /* CONFIG_CPU_BMIPS4350 || CONFIG_CPU_BMIPS4380 */
++#if defined(CONFIG_CPU_BMIPS5000)
+ /* set exception vector base */
++ li k1, PRID_IMP_BMIPS5000
++ bne k0, k1, 3f
++
+ la k0, ebase
+ lw k0, 0(k0)
+ mtc0 k0, $15, 1
+ BARRIER
+-#endif
+-
++#endif /* CONFIG_CPU_BMIPS5000 */
++3:
+ /* jump back to kseg0 in case we need to remap the kseg1 area */
+ la k0, 1f
+ jr k0
+@@ -221,8 +240,18 @@ END(bmips_smp_int_vec)
+ LEAF(bmips_enable_xks01)
+
+ #if defined(CONFIG_XKS01)
+-
++ mfc0 t0, CP0_PRID
++ andi t2, t0, 0xff00
+ #if defined(CONFIG_CPU_BMIPS4380)
++ li t1, PRID_IMP_BMIPS43XX
++ bne t2, t1, 1f
++
++ andi t0, 0xff
++ addiu t1, t0, -PRID_REV_BMIPS4380_HI
++ bgtz t1, 2f
++ addiu t0, -PRID_REV_BMIPS4380_LO
++ bltz t0, 2f
++
+ mfc0 t0, $22, 3
+ li t1, 0x1ff0
+ li t2, (1 << 12) | (1 << 9)
+@@ -231,7 +260,13 @@ LEAF(bmips_enable_xks01)
+ or t0, t2
+ mtc0 t0, $22, 3
+ BARRIER
+-#elif defined(CONFIG_CPU_BMIPS5000)
++ b 2f
++1:
++#endif /* CONFIG_CPU_BMIPS4380 */
++#if defined(CONFIG_CPU_BMIPS5000)
++ li t1, PRID_IMP_BMIPS5000
++ bne t2, t1, 2f
++
+ mfc0 t0, $22, 5
+ li t1, 0x01ff
+ li t2, (1 << 8) | (1 << 5)
+@@ -240,12 +275,8 @@ LEAF(bmips_enable_xks01)
+ or t0, t2
+ mtc0 t0, $22, 5
+ BARRIER
+-#else
+-
+-#error Missing XKS01 setup
+-
+-#endif
+-
++#endif /* CONFIG_CPU_BMIPS5000 */
++2:
+ #endif /* defined(CONFIG_XKS01) */
+
+ jr ra
+--- a/arch/mips/kernel/smp-bmips.c
++++ b/arch/mips/kernel/smp-bmips.c
+@@ -49,8 +49,11 @@ cpumask_t bmips_booted_mask;
+ unsigned long bmips_smp_boot_sp;
+ unsigned long bmips_smp_boot_gp;
+
++static void bmips43xx_send_ipi_single(int cpu, unsigned int action);
++static void bmips5000_send_ipi_single(int cpu, unsigned int action);
+ static void bmips_send_ipi_single(int cpu, unsigned int action);
+-static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id);
++static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id);
++static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id);
+
+ /* SW interrupts 0,1 are used for interprocessor signaling */
+ #define IPI0_IRQ (MIPS_CPU_IRQ_BASE + 0)
+@@ -65,48 +68,49 @@ static void __init bmips_smp_setup(void)
+ {
+ int i, cpu = 1, boot_cpu = 0;
+
+-#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
+- /* arbitration priority */
+- clear_c0_brcm_cmt_ctrl(0x30);
+-
+- /* NBK and weak order flags */
+- set_c0_brcm_config_0(0x30000);
+-
+- /* Find out if we are running on TP0 or TP1 */
+- boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
+-
+- /*
+- * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other thread
+- * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output
+- * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output
+- *
+- * If booting from TP1, leave the existing CMT interrupt routing
+- * such that TP0 responds to SW1 and TP1 responds to SW0.
+- */
+- if (boot_cpu == 0)
+- change_c0_brcm_cmt_intr(0xf8018000,
++ if (cpu_is_bmips4350() || cpu_is_bmips4380()) {
++ /* arbitration priority */
++ clear_c0_brcm_cmt_ctrl(0x30);
++
++ /* NBK and weak order flags */
++ set_c0_brcm_config_0(0x30000);
++
++ /* Find out if we are running on TP0 or TP1 */
++ boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
++
++ /*
++ * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other
++ * thread
++ * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output
++ * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output
++ *
++ * If booting from TP1, leave the existing CMT interrupt routing
++ * such that TP0 responds to SW1 and TP1 responds to SW0.
++ */
++ if (boot_cpu == 0)
++ change_c0_brcm_cmt_intr(0xf8018000,
+ (0x02 << 27) | (0x03 << 15));
+- else
+- change_c0_brcm_cmt_intr(0xf8018000, (0x1d << 27));
+-
+- /* single core, 2 threads (2 pipelines) */
+- max_cpus = 2;
+-#elif defined(CONFIG_CPU_BMIPS5000)
+- /* enable raceless SW interrupts */
+- set_c0_brcm_config(0x03 << 22);
+-
+- /* route HW interrupt 0 to CPU0, HW interrupt 1 to CPU1 */
+- change_c0_brcm_mode(0x1f << 27, 0x02 << 27);
++ else
++ change_c0_brcm_cmt_intr(0xf8018000, (0x1d << 27));
+
+- /* N cores, 2 threads per core */
+- max_cpus = (((read_c0_brcm_config() >> 6) & 0x03) + 1) << 1;
+-
+- /* clear any pending SW interrupts */
+- for (i = 0; i < max_cpus; i++) {
+- write_c0_brcm_action(ACTION_CLR_IPI(i, 0));
+- write_c0_brcm_action(ACTION_CLR_IPI(i, 1));
++ /* single core, 2 threads (2 pipelines) */
++ max_cpus = 2;
++ } else if (cpu_is_bmips5000()) {
++ /* enable raceless SW interrupts */
++ set_c0_brcm_config(0x03 << 22);
++
++ /* route HW interrupt 0 to CPU0, HW interrupt 1 to CPU1 */
++ change_c0_brcm_mode(0x1f << 27, 0x02 << 27);
++
++ /* N cores, 2 threads per core */
++ max_cpus = (((read_c0_brcm_config() >> 6) & 0x03) + 1) << 1;
++
++ /* clear any pending SW interrupts */
++ for (i = 0; i < max_cpus; i++) {
++ write_c0_brcm_action(ACTION_CLR_IPI(i, 0));
++ write_c0_brcm_action(ACTION_CLR_IPI(i, 1));
++ }
+ }
+-#endif
+
+ if (!bmips_smp_enabled)
+ max_cpus = 1;
+@@ -134,6 +138,15 @@ static void __init bmips_smp_setup(void)
+ */
+ static void bmips_prepare_cpus(unsigned int max_cpus)
+ {
++ irqreturn_t (*bmips_ipi_interrupt)(int irq, void *dev_id);
++
++ if (cpu_is_bmips4350() || cpu_is_bmips4380())
++ bmips_ipi_interrupt = bmips43xx_ipi_interrupt;
++ else if (cpu_is_bmips5000())
++ bmips_ipi_interrupt = bmips5000_ipi_interrupt;
++ else
++ return;
++
+ if (request_irq(IPI0_IRQ, bmips_ipi_interrupt, IRQF_PERCPU,
+ "smp_ipi0", NULL))
+ panic("Can't request IPI0 interrupt\n");
+@@ -168,26 +181,26 @@ static void bmips_boot_secondary(int cpu
+
+ pr_info("SMP: Booting CPU%d...\n", cpu);
+
+- if (cpumask_test_cpu(cpu, &bmips_booted_mask))
++ if (cpumask_test_cpu(cpu, &bmips_booted_mask)) {
+ bmips_send_ipi_single(cpu, 0);
+- else {
+-#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
+- /* Reset slave TP1 if booting from TP0 */
+- if (cpu_logical_map(cpu) == 0)
+- set_c0_brcm_cmt_ctrl(0x01);
+-#elif defined(CONFIG_CPU_BMIPS5000)
+- if (cpu & 0x01)
+- write_c0_brcm_action(ACTION_BOOT_THREAD(cpu));
+- else {
+- /*
+- * core N thread 0 was already booted; just
+- * pulse the NMI line
+- */
+- bmips_write_zscm_reg(0x210, 0xc0000000);
+- udelay(10);
+- bmips_write_zscm_reg(0x210, 0x00);
++ } else {
++ if (cpu_is_bmips4350() || cpu_is_bmips4380()) {
++ /* Reset slave TP1 if booting from TP0 */
++ if (cpu_logical_map(cpu) == 0)
++ set_c0_brcm_cmt_ctrl(0x01);
++ } else if (cpu_is_bmips5000()) {
++ if (cpu & 0x01)
++ write_c0_brcm_action(ACTION_BOOT_THREAD(cpu));
++ else {
++ /*
++ * core N thread 0 was already booted; just
++ * pulse the NMI line
++ */
++ bmips_write_zscm_reg(0x210, 0xc0000000);
++ udelay(10);
++ bmips_write_zscm_reg(0x210, 0x00);
++ }
+ }
+-#endif
+ cpumask_set_cpu(cpu, &bmips_booted_mask);
+ }
+ }
+@@ -199,20 +212,21 @@ static void bmips_init_secondary(void)
+ {
+ /* move NMI vector to kseg0, in case XKS01 is enabled */
+
+-#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
+- void __iomem *cbr = BMIPS_GET_CBR();
+- unsigned long old_vec;
+-
+- old_vec = __raw_readl(cbr + BMIPS_RELO_VECTOR_CONTROL_1);
+- __raw_writel(old_vec & ~0x20000000, cbr + BMIPS_RELO_VECTOR_CONTROL_1);
+-
+- clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0);
+-#elif defined(CONFIG_CPU_BMIPS5000)
+- write_c0_brcm_bootvec(read_c0_brcm_bootvec() &
+- (smp_processor_id() & 0x01 ? ~0x20000000 : ~0x2000));
++ if (cpu_is_bmips4350() || cpu_is_bmips4380()) {
++ void __iomem *cbr = BMIPS_GET_CBR();
++ unsigned long old_vec;
++
++ old_vec = __raw_readl(cbr + BMIPS_RELO_VECTOR_CONTROL_1);
++ __raw_writel(old_vec & ~0x20000000,
++ cbr + BMIPS_RELO_VECTOR_CONTROL_1);
++
++ clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0);
++ } else if (cpu_is_bmips5000()) {
++ write_c0_brcm_bootvec(read_c0_brcm_bootvec() &
++ (smp_processor_id() & 0x01 ? ~0x20000000 : ~0x2000));
+
+- write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0));
+-#endif
++ write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0));
++ }
+ }
+
+ /*
+@@ -237,8 +251,6 @@ static void bmips_cpus_done(void)
+ {
+ }
+
+-#if defined(CONFIG_CPU_BMIPS5000)
+-
+ /*
+ * BMIPS5000 raceless IPIs
+ *
+@@ -247,12 +259,12 @@ static void bmips_cpus_done(void)
+ * IPI1 is used for SMP_CALL_FUNCTION
+ */
+
+-static void bmips_send_ipi_single(int cpu, unsigned int action)
++static void bmips5000_send_ipi_single(int cpu, unsigned int action)
+ {
+ write_c0_brcm_action(ACTION_SET_IPI(cpu, action == SMP_CALL_FUNCTION));
+ }
+
+-static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id)
++static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id)
+ {
+ int action = irq - IPI0_IRQ;
+
+@@ -266,8 +278,6 @@ static irqreturn_t bmips_ipi_interrupt(i
+ return IRQ_HANDLED;
+ }
+
+-#else
+-
+ /*
+ * BMIPS43xx racey IPIs
+ *
+@@ -281,7 +291,7 @@ static irqreturn_t bmips_ipi_interrupt(i
+ static DEFINE_SPINLOCK(ipi_lock);
+ static DEFINE_PER_CPU(int, ipi_action_mask);
+
+-static void bmips_send_ipi_single(int cpu, unsigned int action)
++static void bmips43xx_send_ipi_single(int cpu, unsigned int action)
+ {
+ unsigned long flags;
+
+@@ -292,7 +302,7 @@ static void bmips_send_ipi_single(int cp
+ spin_unlock_irqrestore(&ipi_lock, flags);
+ }
+
+-static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id)
++static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id)
+ {
+ unsigned long flags;
+ int action, cpu = irq - IPI0_IRQ;
+@@ -311,7 +321,13 @@ static irqreturn_t bmips_ipi_interrupt(i
+ return IRQ_HANDLED;
+ }
+
+-#endif /* BMIPS type */
++static void bmips_send_ipi_single(int cpu, unsigned int action)
++{
++ if (cpu_is_bmips4350() || cpu_is_bmips4380())
++ bmips43xx_send_ipi_single(cpu, action);
++ else if (cpu_is_bmips5000())
++ bmips5000_send_ipi_single(cpu, action);
++}
+
+ static void bmips_send_ipi_mask(const struct cpumask *mask,
+ unsigned int action)
+@@ -421,43 +437,44 @@ void __cpuinit bmips_ebase_setup(void)
+
+ BUG_ON(ebase != CKSEG0);
+
+-#if defined(CONFIG_CPU_BMIPS4350)
+- /*
+- * BMIPS4350 cannot relocate the normal vectors, but it
+- * can relocate the BEV=1 vectors. So CPU1 starts up at
+- * the relocated BEV=1, IV=0 general exception vector @
+- * 0xa000_0380.
+- *
+- * set_uncached_handler() is used here because:
+- * - CPU1 will run this from uncached space
+- * - None of the cacheflush functions are set up yet
+- */
+- set_uncached_handler(BMIPS_WARM_RESTART_VEC - CKSEG0,
+- &bmips_smp_int_vec, 0x80);
+- __sync();
+- return;
+-#elif defined(CONFIG_CPU_BMIPS4380)
+- /*
+- * 0x8000_0000: reset/NMI (initially in kseg1)
+- * 0x8000_0400: normal vectors
+- */
+- new_ebase = 0x80000400;
+- cbr = BMIPS_GET_CBR();
+- __raw_writel(0x80080800, cbr + BMIPS_RELO_VECTOR_CONTROL_0);
+- __raw_writel(0xa0080800, cbr + BMIPS_RELO_VECTOR_CONTROL_1);
+-#elif defined(CONFIG_CPU_BMIPS5000)
+- /*
+- * 0x8000_0000: reset/NMI (initially in kseg1)
+- * 0x8000_1000: normal vectors
+- */
+- new_ebase = 0x80001000;
+- write_c0_brcm_bootvec(0xa0088008);
+- write_c0_ebase(new_ebase);
+- if (max_cpus > 2)
+- bmips_write_zscm_reg(0xa0, 0xa008a008);
+-#else
+- return;
+-#endif
++ if (cpu_is_bmips4350()) {
++ /*
++ * BMIPS4350 cannot relocate the normal vectors, but it
++ * can relocate the BEV=1 vectors. So CPU1 starts up at
++ * the relocated BEV=1, IV=0 general exception vector @
++ * 0xa000_0380.
++ *
++ * set_uncached_handler() is used here because:
++ * - CPU1 will run this from uncached space
++ * - None of the cacheflush functions are set up yet
++ */
++ set_uncached_handler(BMIPS_WARM_RESTART_VEC - CKSEG0,
++ &bmips_smp_int_vec, 0x80);
++ __sync();
++ return;
++ } else if (cpu_is_bmips4380()) {
++ /*
++ * 0x8000_0000: reset/NMI (initially in kseg1)
++ * 0x8000_0400: normal vectors
++ */
++ new_ebase = 0x80000400;
++ cbr = BMIPS_GET_CBR();
++ __raw_writel(0x80080800, cbr + BMIPS_RELO_VECTOR_CONTROL_0);
++ __raw_writel(0xa0080800, cbr + BMIPS_RELO_VECTOR_CONTROL_1);
++ } else if (cpu_is_bmips5000()) {
++ /*
++ * 0x8000_0000: reset/NMI (initially in kseg1)
++ * 0x8000_1000: normal vectors
++ */
++ new_ebase = 0x80001000;
++ write_c0_brcm_bootvec(0xa0088008);
++ write_c0_ebase(new_ebase);
++ if (max_cpus > 2)
++ bmips_write_zscm_reg(0xa0, 0xa008a008);
++ } else {
++ return;
++ }
++
+ board_nmi_handler_setup = &bmips_nmi_handler_setup;
+ ebase = new_ebase;
+ }
diff --git a/target/linux/brcm63xx/patches-3.9/104-MIPS-bmips-merge-CPU-options-into-one-option.patch b/target/linux/brcm63xx/patches-3.9/104-MIPS-bmips-merge-CPU-options-into-one-option.patch
new file mode 100644
index 0000000000..386c63c1ae
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.9/104-MIPS-bmips-merge-CPU-options-into-one-option.patch
@@ -0,0 +1,126 @@
+From 1ecac776e6c652e3059d4f4d9dd8369e89ebef81 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Thu, 27 Jun 2013 23:57:20 +0200
+Subject: [PATCH 05/10] MIPS: bmips: merge CPU options into one option
+
+Instead of treating each flavour as an exclusive CPU to select, make
+BMIPS the only option and let SYS_HAS_CPU_BMIPS* decide for which
+flavours to include support.
+
+Run tested on BMIPS3300 and BMIPS4350, only build tested for BMIPS4380
+and BMISP5000.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/Kconfig | 77 +++++++++++++++++++++++++----------------------------
+ 1 file changed, 36 insertions(+), 41 deletions(-)
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -130,6 +130,7 @@ config BCM63XX
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select SYS_HAS_CPU_MIPS32_R1
++ select SYS_HAS_CPU_BMIPS
+ select SYS_HAS_CPU_BMIPS4350 if !BCM63XX_CPU_6338 && !BCM63XX_CPU_6345 && !BCM63XX_CPU_6348
+ select NR_CPUS_DEFAULT_2
+ select SYS_SUPPORTS_32BIT_KERNEL
+@@ -1454,41 +1455,21 @@ config CPU_CAVIUM_OCTEON
+ can have up to 16 Mips64v2 cores and 8 integrated gigabit ethernets.
+ Full details can be found at http://www.caviumnetworks.com.
+
+-config CPU_BMIPS3300
+- bool "BMIPS3300"
+- depends on SYS_HAS_CPU_BMIPS3300
+- select CPU_BMIPS
+- help
+- Broadcom BMIPS3300 processors.
+-
+-config CPU_BMIPS4350
+- bool "BMIPS4350"
+- depends on SYS_HAS_CPU_BMIPS4350
+- select CPU_BMIPS
+- select SYS_SUPPORTS_SMP
+- select SYS_SUPPORTS_HOTPLUG_CPU
+- help
+- Broadcom BMIPS4350 ("VIPER") processors.
+-
+-config CPU_BMIPS4380
+- bool "BMIPS4380"
+- depends on SYS_HAS_CPU_BMIPS4380
+- select CPU_BMIPS
+- select SYS_SUPPORTS_SMP
+- select SYS_SUPPORTS_HOTPLUG_CPU
+- help
+- Broadcom BMIPS4380 processors.
+-
+-config CPU_BMIPS5000
+- bool "BMIPS5000"
+- depends on SYS_HAS_CPU_BMIPS5000
+- select CPU_BMIPS
+- select CPU_SUPPORTS_HIGHMEM
+- select MIPS_CPU_SCACHE
+- select SYS_SUPPORTS_SMP
+- select SYS_SUPPORTS_HOTPLUG_CPU
++config CPU_BMIPS
++ bool "Broadcom BMIPS"
++ depends on SYS_HAS_CPU_BMIPS
++ select CPU_MIPS32
++ select CPU_BMIPS3300 if SYS_HAS_CPU_BMIPS3300
++ select CPU_BMIPS4350 if SYS_HAS_CPU_BMIPS4350
++ select CPU_BMIPS4350 if SYS_HAS_CPU_BMIPS4380
++ select CPU_BMIPS5000 if SYS_HAS_CPU_BMIPS5000
++ select CPU_SUPPORTS_32BIT_KERNEL
++ select DMA_NONCOHERENT
++ select IRQ_CPU
++ select SWAP_IO_SPACE
++ select WEAK_ORDERING
+ help
+- Broadcom BMIPS5000 processors.
++ Support for BMIPS3300/4350/4380 and BMIPS5000 processors.
+
+ config CPU_XLR
+ bool "Netlogic XLR SoC"
+@@ -1569,14 +1550,25 @@ config CPU_LOONGSON1
+ select CPU_SUPPORTS_32BIT_KERNEL
+ select CPU_SUPPORTS_HIGHMEM
+
+-config CPU_BMIPS
++config CPU_BMIPS3300
+ bool
+- select CPU_MIPS32
+- select CPU_SUPPORTS_32BIT_KERNEL
+- select DMA_NONCOHERENT
+- select IRQ_CPU
+- select SWAP_IO_SPACE
+- select WEAK_ORDERING
++
++config CPU_BMIPS4350
++ bool
++ select SYS_SUPPORTS_SMP
++ select SYS_SUPPORTS_HOTPLUG_CPU
++
++config CPU_BMIPS4380
++ bool
++ select SYS_SUPPORTS_SMP
++ select SYS_SUPPORTS_HOTPLUG_CPU
++
++config CPU_BMIPS5000
++ bool
++ select CPU_SUPPORTS_HIGHMEM
++ select MIPS_CPU_SCACHE
++ select SYS_SUPPORTS_SMP
++ select SYS_SUPPORTS_HOTPLUG_CPU
+
+ config SYS_HAS_CPU_LOONGSON2E
+ bool
+@@ -1650,6 +1642,9 @@ config SYS_HAS_CPU_SB1
+ config SYS_HAS_CPU_CAVIUM_OCTEON
+ bool
+
++config SYS_HAS_CPU_BMIPS
++ bool
++
+ config SYS_HAS_CPU_BMIPS3300
+ bool
+
diff --git a/target/linux/brcm63xx/patches-3.9/105-MIPS-BCM63XX-let-the-individual-SoCs-select-the-appr.patch b/target/linux/brcm63xx/patches-3.9/105-MIPS-BCM63XX-let-the-individual-SoCs-select-the-appr.patch
new file mode 100644
index 0000000000..cb09abcc2d
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.9/105-MIPS-BCM63XX-let-the-individual-SoCs-select-the-appr.patch
@@ -0,0 +1,72 @@
+From 9d1e9d7abd2f2d067169fb0c62e34cf080bbd7a1 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 23 Jun 2013 12:25:49 +0200
+Subject: [PATCH 06/10] MIPS: BCM63XX: let the individual SoCs select the
+ appropriate CPUs
+
+Let each supported chip select the appropirate SYS_HAS_CPU_BMIPS*
+option for its embedded processor, so support will be conditionally
+included.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+
+fix bmips selection
+---
+ arch/mips/Kconfig | 1 -
+ arch/mips/bcm63xx/Kconfig | 8 ++++++++
+ 2 files changed, 8 insertions(+), 1 deletion(-)
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -131,7 +131,6 @@ config BCM63XX
+ select IRQ_CPU
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_CPU_BMIPS
+- select SYS_HAS_CPU_BMIPS4350 if !BCM63XX_CPU_6338 && !BCM63XX_CPU_6345 && !BCM63XX_CPU_6348
+ select NR_CPUS_DEFAULT_2
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -3,33 +3,41 @@ menu "CPU support"
+
+ config BCM63XX_CPU_3368
+ bool "support 3368 CPU"
++ select SYS_HAS_CPU_BMIPS4350
+ select HW_HAS_PCI
+
+ config BCM63XX_CPU_6328
+ bool "support 6328 CPU"
++ select SYS_HAS_CPU_BMIPS4350
+ select HW_HAS_PCI
+
+ config BCM63XX_CPU_6338
+ bool "support 6338 CPU"
++ select SYS_HAS_CPU_BMIPS3300
+ select HW_HAS_PCI
+
+ config BCM63XX_CPU_6345
+ bool "support 6345 CPU"
++ select SYS_HAS_CPU_BMIPS3300
+
+ config BCM63XX_CPU_6348
+ bool "support 6348 CPU"
++ select SYS_HAS_CPU_BMIPS3300
+ select HW_HAS_PCI
+
+ config BCM63XX_CPU_6358
+ bool "support 6358 CPU"
++ select SYS_HAS_CPU_BMIPS4350
+ select HW_HAS_PCI
+
+ config BCM63XX_CPU_6362
+ bool "support 6362 CPU"
++ select SYS_HAS_CPU_BMIPS4350
+ select HW_HAS_PCI
+
+ config BCM63XX_CPU_6368
+ bool "support 6368 CPU"
++ select SYS_HAS_CPU_BMIPS4350
+ select HW_HAS_PCI
+ endmenu
+
diff --git a/target/linux/brcm63xx/patches-3.9/106-MIPS-bmips-add-a-helper-function-for-registering-smp.patch b/target/linux/brcm63xx/patches-3.9/106-MIPS-bmips-add-a-helper-function-for-registering-smp.patch
new file mode 100644
index 0000000000..ad357b6ab2
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.9/106-MIPS-bmips-add-a-helper-function-for-registering-smp.patch
@@ -0,0 +1,42 @@
+From aa15ac91faccc3bf01a29670b1f9ae1945cea056 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 23 Jun 2013 14:04:51 +0200
+Subject: [PATCH 07/10] MIPS: bmips: add a helper function for registering smp
+ ops
+
+Add a helper similar to the generic register_XXX_smp_ops() for bmips.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/include/asm/bmips.h | 13 +++++++++++++
+ 1 file changed, 13 insertions(+)
+
+--- a/arch/mips/include/asm/bmips.h
++++ b/arch/mips/include/asm/bmips.h
+@@ -47,6 +47,7 @@
+ #include <linux/cpumask.h>
+ #include <asm/cpu-features.h>
+ #include <asm/r4kcache.h>
++#include <asm/smp-ops.h>
+
+ #define cpu_is_bmips32() (current_cpu_type() == CPU_BMIPS32)
+ #define cpu_is_bmips3300() (IS_ENABLED(CONFIG_CPU_BMIPS3300) && \
+@@ -59,6 +60,18 @@
+ current_cpu_type() == CPU_BMIPS5000)
+
+ extern struct plat_smp_ops bmips_smp_ops;
++
++static inline int register_bmips_smp_ops(void)
++{
++#ifdef CONFIG_CPU_BMIPS
++ register_smp_ops(&bmips_smp_ops);
++
++ return 0;
++#else
++ return -ENODEV;
++#endif
++}
++
+ extern char bmips_reset_nmi_vec;
+ extern char bmips_reset_nmi_vec_end;
+ extern char bmips_smp_movevec;
diff --git a/target/linux/brcm63xx/patches-3.9/107-MIPS-BCM63XX-always-register-bmips-smp-ops.patch b/target/linux/brcm63xx/patches-3.9/107-MIPS-BCM63XX-always-register-bmips-smp-ops.patch
new file mode 100644
index 0000000000..1ea52c478c
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.9/107-MIPS-BCM63XX-always-register-bmips-smp-ops.patch
@@ -0,0 +1,26 @@
+From c489eace9492d1b8bedb314bdef169e719161bff Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Fri, 28 Jun 2013 00:08:16 +0200
+Subject: [PATCH 08/10] MIPS: BCM63XX: always register bmips smp ops
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/prom.c | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+--- a/arch/mips/bcm63xx/prom.c
++++ b/arch/mips/bcm63xx/prom.c
+@@ -59,10 +59,10 @@ void __init prom_init(void)
+ /* do low level board init */
+ board_prom_init();
+
+- if (IS_ENABLED(CONFIG_CPU_BMIPS4350) && IS_ENABLED(CONFIG_SMP)) {
+- /* set up SMP */
+- register_smp_ops(&bmips_smp_ops);
++ /* set up SMP */
++ register_bmips_smp_ops();
+
++ if (IS_ENABLED(CONFIG_CPU_BMIPS4350) && IS_ENABLED(CONFIG_SMP)) {
+ /*
+ * BCM6328 might not have its second CPU enabled, while BCM6358
+ * needs special handling for its shared TLB, so disable SMP
diff --git a/target/linux/brcm63xx/patches-3.9/108-MIPS-BCM63XX-change-the-guard-to-a-BMIPS4350-check.patch b/target/linux/brcm63xx/patches-3.9/108-MIPS-BCM63XX-change-the-guard-to-a-BMIPS4350-check.patch
new file mode 100644
index 0000000000..75729858eb
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.9/108-MIPS-BCM63XX-change-the-guard-to-a-BMIPS4350-check.patch
@@ -0,0 +1,21 @@
+From 3a862fd3cc4f477ad2232370abfceca1ec2145ae Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Fri, 28 Jun 2013 00:10:07 +0200
+Subject: [PATCH 09/10] MIPS: BCM63XX: change the guard to a BMIPS4350 check
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/prom.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/mips/bcm63xx/prom.c
++++ b/arch/mips/bcm63xx/prom.c
+@@ -62,7 +62,7 @@ void __init prom_init(void)
+ /* set up SMP */
+ register_bmips_smp_ops();
+
+- if (IS_ENABLED(CONFIG_CPU_BMIPS4350) && IS_ENABLED(CONFIG_SMP)) {
++ if (cpu_is_bmips4350()) {
+ /*
+ * BCM6328 might not have its second CPU enabled, while BCM6358
+ * needs special handling for its shared TLB, so disable SMP
diff --git a/target/linux/brcm63xx/patches-3.9/109-MIPS-BCM63XX-disable-SMP-also-on-BCM3368.patch b/target/linux/brcm63xx/patches-3.9/109-MIPS-BCM63XX-disable-SMP-also-on-BCM3368.patch
new file mode 100644
index 0000000000..dbb2ae4e34
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.9/109-MIPS-BCM63XX-disable-SMP-also-on-BCM3368.patch
@@ -0,0 +1,36 @@
+From 32d4b03c0aedb96022e86a67a560f6eaf488200a Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Fri, 28 Jun 2013 00:25:13 +0200
+Subject: [PATCH 10/10] MIPS: BCM63XX: disable SMP also on BCM3368
+
+BCM3368 has the same shared TLB as BCM6358.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/prom.c | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+--- a/arch/mips/bcm63xx/prom.c
++++ b/arch/mips/bcm63xx/prom.c
+@@ -64,9 +64,9 @@ void __init prom_init(void)
+
+ if (cpu_is_bmips4350()) {
+ /*
+- * BCM6328 might not have its second CPU enabled, while BCM6358
+- * needs special handling for its shared TLB, so disable SMP
+- * for now.
++ * BCM6328 might not have its second CPU enabled, while BCM3368
++ * and BCM6358 need special handling for their shared TLB, so
++ * disable SMP for now.
+ */
+ if (BCMCPU_IS_6328()) {
+ reg = bcm_readl(BCM_6328_OTP_BASE +
+@@ -74,7 +74,7 @@ void __init prom_init(void)
+
+ if (reg & OTP_6328_REG3_TP1_DISABLED)
+ bmips_smp_enabled = 0;
+- } else if (BCMCPU_IS_6358()) {
++ } else if (BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
+ bmips_smp_enabled = 0;
+ }
+
diff --git a/target/linux/brcm63xx/patches-3.9/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch b/target/linux/brcm63xx/patches-3.9/110-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch
index 63d385be4e..63d385be4e 100644
--- a/target/linux/brcm63xx/patches-3.9/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch
+++ b/target/linux/brcm63xx/patches-3.9/110-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch
diff --git a/target/linux/brcm63xx/patches-3.9/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch b/target/linux/brcm63xx/patches-3.9/111-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch
index eaf75030f0..eaf75030f0 100644
--- a/target/linux/brcm63xx/patches-3.9/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch
+++ b/target/linux/brcm63xx/patches-3.9/111-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch
diff --git a/target/linux/brcm63xx/patches-3.9/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch b/target/linux/brcm63xx/patches-3.9/112-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch
index 4d00f0e763..4d00f0e763 100644
--- a/target/linux/brcm63xx/patches-3.9/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch
+++ b/target/linux/brcm63xx/patches-3.9/112-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch
diff --git a/target/linux/brcm63xx/patches-3.9/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch b/target/linux/brcm63xx/patches-3.9/113-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch
index 40bbe083a7..40bbe083a7 100644
--- a/target/linux/brcm63xx/patches-3.9/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch
+++ b/target/linux/brcm63xx/patches-3.9/113-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch
diff --git a/target/linux/brcm63xx/patches-3.9/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch b/target/linux/brcm63xx/patches-3.9/114-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch
index 81810c073a..03fa41c410 100644
--- a/target/linux/brcm63xx/patches-3.9/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch
+++ b/target/linux/brcm63xx/patches-3.9/114-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch
@@ -16,8 +16,8 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
--- a/arch/mips/bcm63xx/Kconfig
+++ b/arch/mips/bcm63xx/Kconfig
-@@ -5,9 +5,16 @@ config BCM63XX_CPU_3368
- bool "support 3368 CPU"
+@@ -6,10 +6,17 @@ config BCM63XX_CPU_3368
+ select SYS_HAS_CPU_BMIPS4350
select HW_HAS_PCI
+config BCM63XX_OHCI
@@ -28,29 +28,33 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
+
config BCM63XX_CPU_6328
bool "support 6328 CPU"
+ select SYS_HAS_CPU_BMIPS4350
select HW_HAS_PCI
+ select BCM63XX_OHCI
config BCM63XX_CPU_6338
bool "support 6338 CPU"
-@@ -19,18 +26,22 @@ config BCM63XX_CPU_6345
- config BCM63XX_CPU_6348
+@@ -24,21 +31,25 @@ config BCM63XX_CPU_6348
bool "support 6348 CPU"
+ select SYS_HAS_CPU_BMIPS3300
select HW_HAS_PCI
+ select BCM63XX_OHCI
config BCM63XX_CPU_6358
bool "support 6358 CPU"
+ select SYS_HAS_CPU_BMIPS4350
select HW_HAS_PCI
+ select BCM63XX_OHCI
config BCM63XX_CPU_6362
bool "support 6362 CPU"
+ select SYS_HAS_CPU_BMIPS4350
select HW_HAS_PCI
+ select BCM63XX_OHCI
config BCM63XX_CPU_6368
bool "support 6368 CPU"
+ select SYS_HAS_CPU_BMIPS4350
select HW_HAS_PCI
+ select BCM63XX_OHCI
endmenu
diff --git a/target/linux/brcm63xx/patches-3.9/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch b/target/linux/brcm63xx/patches-3.9/115-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch
index 732fe94cfd..732fe94cfd 100644
--- a/target/linux/brcm63xx/patches-3.9/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch
+++ b/target/linux/brcm63xx/patches-3.9/115-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch
diff --git a/target/linux/brcm63xx/patches-3.9/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch b/target/linux/brcm63xx/patches-3.9/116-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch
index 621e1f909d..621e1f909d 100644
--- a/target/linux/brcm63xx/patches-3.9/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch
+++ b/target/linux/brcm63xx/patches-3.9/116-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch
diff --git a/target/linux/brcm63xx/patches-3.9/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch b/target/linux/brcm63xx/patches-3.9/117-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch
index a76252ed5c..97b8d6518a 100644
--- a/target/linux/brcm63xx/patches-3.9/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch
+++ b/target/linux/brcm63xx/patches-3.9/117-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch
@@ -19,7 +19,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
--- a/arch/mips/bcm63xx/Kconfig
+++ b/arch/mips/bcm63xx/Kconfig
-@@ -11,10 +11,17 @@ config BCM63XX_OHCI
+@@ -12,11 +12,18 @@ config BCM63XX_OHCI
select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD
select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD
@@ -31,26 +31,29 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
+
config BCM63XX_CPU_6328
bool "support 6328 CPU"
+ select SYS_HAS_CPU_BMIPS4350
select HW_HAS_PCI
select BCM63XX_OHCI
+ select BCM63XX_EHCI
config BCM63XX_CPU_6338
bool "support 6338 CPU"
-@@ -32,16 +39,19 @@ config BCM63XX_CPU_6358
- bool "support 6358 CPU"
+@@ -38,18 +45,21 @@ config BCM63XX_CPU_6358
+ select SYS_HAS_CPU_BMIPS4350
select HW_HAS_PCI
select BCM63XX_OHCI
+ select BCM63XX_EHCI
config BCM63XX_CPU_6362
bool "support 6362 CPU"
+ select SYS_HAS_CPU_BMIPS4350
select HW_HAS_PCI
select BCM63XX_OHCI
+ select BCM63XX_EHCI
config BCM63XX_CPU_6368
bool "support 6368 CPU"
+ select SYS_HAS_CPU_BMIPS4350
select HW_HAS_PCI
select BCM63XX_OHCI
+ select BCM63XX_EHCI
diff --git a/target/linux/brcm63xx/patches-3.9/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch b/target/linux/brcm63xx/patches-3.9/118-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch
index ef4ba17a4d..ef4ba17a4d 100644
--- a/target/linux/brcm63xx/patches-3.9/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch
+++ b/target/linux/brcm63xx/patches-3.9/118-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch
diff --git a/target/linux/brcm63xx/patches-3.9/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch b/target/linux/brcm63xx/patches-3.9/119-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch
index 3d1e7f58cc..3d1e7f58cc 100644
--- a/target/linux/brcm63xx/patches-3.9/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch
+++ b/target/linux/brcm63xx/patches-3.9/119-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch
diff --git a/target/linux/brcm63xx/patches-3.9/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch b/target/linux/brcm63xx/patches-3.9/120-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch
index 6d91129932..6d91129932 100644
--- a/target/linux/brcm63xx/patches-3.9/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch
+++ b/target/linux/brcm63xx/patches-3.9/120-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch