aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network3
-rw-r--r--target/linux/ramips/dts/TEW-692GR.dts23
2 files changed, 23 insertions, 3 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 0bf1a8a3ba..73404d91b0 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -337,8 +337,7 @@ ramips_setup_macs()
wan_mac=$(macaddr_add "$lan_mac" 3)
;;
tew-692gr)
- lan_mac=$(cat /sys/class/net/eth0/address)
- wan_mac=$(macaddr_add "$lan_mac" 4)
+ wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 4)" 1)
;;
tiny-ac)
lan_mac=$(mtd_get_mac_ascii u-boot-env LAN_MAC_ADDR)
diff --git a/target/linux/ramips/dts/TEW-692GR.dts b/target/linux/ramips/dts/TEW-692GR.dts
index 5bba8a50b8..1a56710e52 100644
--- a/target/linux/ramips/dts/TEW-692GR.dts
+++ b/target/linux/ramips/dts/TEW-692GR.dts
@@ -86,7 +86,7 @@
&ethernet {
status = "okay";
- mtd-mac-address = <&factory 0x28>;
+ mtd-mac-address = <&factory 0x4>;
port@0 {
phy-handle = <&phy0>;
@@ -98,6 +98,19 @@
phy0: ethernet-phy@0 {
reg = <0>;
+ phy-mode = "rgmii";
+
+ qca,ar8327-initvals = <
+ 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
+ 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
+ 0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
+ 0x50 0xc437c437 /* LED Control Register 0 */
+ 0x54 0xc337c337 /* LED Control Register 1 */
+ 0x58 0x00000000 /* LED Control Register 2 */
+ 0x5c 0x03ffff00 /* LED Control Register 3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6 STATUS */
+ >;
};
};
};
@@ -117,10 +130,18 @@
host-bridge {
pci-bridge@1 {
status = "okay";
+
+ wmac@0,0 {
+ compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
+ reg = < 0x10000 0 0 0 0 >;
+ ralink,2ghz = <0>;
+ };
};
};
};
&wmac {
+ status = "okay";
+ ralink,mtd-eeprom = <&factory 0x0>;
ralink,5ghz = <0>;
};