diff options
Diffstat (limited to 'target/linux')
-rw-r--r-- | target/linux/lantiq/base-files/etc/uci-defaults/02_network | 6 | ||||
-rw-r--r-- | target/linux/lantiq/dts/P2812HNUFX.dts | 308 | ||||
-rw-r--r-- | target/linux/lantiq/image/Makefile | 4 | ||||
-rw-r--r-- | target/linux/lantiq/xrx200/profiles/zyxel.mk | 14 |
4 files changed, 332 insertions, 0 deletions
diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/02_network b/target/linux/lantiq/base-files/etc/uci-defaults/02_network index 6e17d4dde2..4903eb92d0 100644 --- a/target/linux/lantiq/base-files/etc/uci-defaults/02_network +++ b/target/linux/lantiq/base-files/etc/uci-defaults/02_network @@ -109,6 +109,12 @@ P2601HNFX) ucidef_add_switch "switch0" "1" "1" ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t" ;; + +P2812HNUFX) + ucidef_set_interface_lan 'eth0.1' + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "0 1 2 4 5 6t" + ;; TDW8970) lan_mac=$(mtd_get_mac_binary boardconfig 61696) diff --git a/target/linux/lantiq/dts/P2812HNUFX.dts b/target/linux/lantiq/dts/P2812HNUFX.dts new file mode 100644 index 0000000000..5af10d49f3 --- /dev/null +++ b/target/linux/lantiq/dts/P2812HNUFX.dts @@ -0,0 +1,308 @@ +/dts-v1/; + +/include/ "vr9.dtsi" + +/ { + model = "P2812HNUFX - ZyXEL P-2812HNU-Fx"; + + chosen { + /*bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";*/ + }; + + memory@0 { + reg = <0x0 0x8000000>; + }; + + fpi@10000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,fpi", "simple-bus"; + ranges = <0x0 0x10000000 0xEEFFFFF>; + reg = <0x10000000 0xEF00000>; + + localbus@0 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "lantiq,localbus", "simple-bus"; + + nand-parts@0 { + compatible = "gen_nand", "lantiq,nand-xway"; + lantiq,cs = <1>; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000 0x40000>; + }; + + partition@40000 { + label = "u-boot environment"; + reg = <0x40000 0x20000>; + }; + + partition@60000 { + label = "root"; + reg = <0x60000 0x7fa0000>; + }; + }; + }; + + gpio: pinmux@E100B10 { + compatible = "lantiq,pinctrl-xr9"; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + interrupt-parent = <&icu0>; + interrupts = <166 135 66 40 41 42 38>; + + #gpio-cells = <2>; + gpio-controller; + reg = <0xE100B10 0xA0>; + + state_default: pinmux { + mdio { + lantiq,groups = "mdio"; + lantiq,function = "mdio"; + }; + gphy-leds { + lantiq,groups = "gphy0 led1", "gphy1 led1", + "gphy0 led2", "gphy1 led2"; + lantiq,function = "gphy"; + lantiq,pull = <2>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + stp { + lantiq,groups = "stp"; + lantiq,function = "stp"; + lantiq,pull = <2>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + pci { + lantiq,groups = "gnt1", "req1"; + lantiq,function = "pci"; + }; + pci-rst { + lantiq,pins = "io21"; + lantiq,pull = <0>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + ifxhcd-rst { + lantiq,pins = "io33"; + lantiq,pull = <0>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + nand { + lantiq,groups = "nand cle", "nand ale", + "nand rd", "nand cs1", "nand rdy"; + lantiq,function = "ebu"; + lantiq,pull = <1>; + }; + }; + }; + + eth@E108000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-net"; + reg = < 0xE108000 0x3000 /* switch */ + 0xE10B100 0x70 /* mdio */ + 0xE10B1D8 0x30 /* mii */ + 0xE10B308 0x30 /* pmac */ + >; + interrupt-parent = <&icu0>; + interrupts = <73 72>; + + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + mac-address = [ 00 11 22 33 44 55 ]; + lantiq,switch; + + ethernet@0 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet@1 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <1>; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "gmii"; + phy-handle = <&phy11>; + }; + ethernet@4 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "gmii"; + phy-handle = <&phy13>; + }; + ethernet@5 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <5>; + phy-mode = "rgmii"; + phy-handle = <&phy5>; + }; + }; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + phy0: ethernet-phy@0 { + reg = <0x0>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy1: ethernet-phy@1 { + reg = <0x1>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy5: ethernet-phy@5 { + reg = <0x5>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + }; + }; + + stp: stp@E100BB0 { + compatible = "lantiq,gpio-stp-xway"; + reg = <0xE100BB0 0x40>; + #gpio-cells = <2>; + gpio-controller; + + lantiq,shadow = <0xffffff>; + lantiq,groups = <0x7>; + /* + lantiq,dsl = <0x3>; + lantiq,phy1 = <0x7>; + lantiq,phy2 = <0x7>; + */ + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 33 0>; + lantiq,portmask = <0x3>; + }; + + pci@E105400 { + lantiq,bus-clock = <33333333>; + /* lantiq,external-clock; */ + lantiq,delay-hi = <0>; /* 0ns delay */ + lantiq,delay-lo = <0>; /* 0.0ns delay */ + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + 0x7000 0 0 1 &icu0 29 //1 // slot 14, irq 29 + >; + gpio-reset = <&gpio 21 0>; + req-mask = <0x1>; /* GNT1 */ + status = "okay"; + }; + }; + + gphy-xrx200 { + compatible = "lantiq,phy-xrx200"; + firmware = "lantiq/vr9_phy11g_a1x.bin"; + phys = [ 00 01 ]; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + reset { + label = "reset"; + gpios = <&gpio 39 1>; + linux,code = <0x198>; + }; + rfkill { + label = "rfkill"; + gpios = <&gpio 1 1>; + linux,code = <0xf7>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + internet2 { + label = "internet2"; + gpios = <&stp 16 1>; + }; + internet { + label = "internet"; + gpios = <&stp 17 1>; + }; + dsl { + label = "dsl"; + gpios = <&stp 18 1>; + }; + dsl2 { + label = "dsl2"; + gpios = <&stp 19 1>; + }; + wifi2 { + label = "wifi2"; + gpios = <&stp 20 1>; + }; + wlan { + label = "wifi"; + gpios = <&stp 21 1>; + }; + power2 { + label = "power2"; + gpios = <&stp 22 1>; + }; + power { + label = "power"; + gpios = <&stp 23 1>; + }; + usb1 { + label = "usb"; + gpios = <&gpio 38 1>; + }; + usb2 { + label = "usb2"; + gpios = <&gpio 44 1>; + }; + phone1 { + label = "phone1"; + gpios = <&gpio 11 1>; + }; + phone1warn { + label = "phone1warn"; + gpios = <&gpio 12 1>; + }; + phone2 { + label = "phone2"; + gpios = <&gpio 28 1>; + }; + phone2warn { + label = "phone2warn"; + gpios = <&gpio 26 1>; + }; + }; +}; diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile index 98f82369b1..4550fc4619 100644 --- a/target/linux/lantiq/image/Makefile +++ b/target/linux/lantiq/image/Makefile @@ -310,6 +310,10 @@ endif ifeq ($(CONFIG_TARGET_lantiq_xrx200),y) # VR9 +Image/BuildKernel/Profile/P2812HNUFX=$(call Image/BuildKernel/Template,P2812HNUFX) +Image/InstallKernel/Template/P2812HNUFX=$(call Image/InstallKernel/Template,P2812HNUFX) +Image/Build/Profile/P2812HNUFX=$(call Image/Build/$(1),$(1),P2812HNUFX) + Image/BuildKernel/Profile/EASY80920NAND=$(call Image/BuildKernel/Template,EASY80920NAND) Image/Build/Profile/EASY80920NAND=$(call Image/Build/$(1),$(1),EASY80920NAND) diff --git a/target/linux/lantiq/xrx200/profiles/zyxel.mk b/target/linux/lantiq/xrx200/profiles/zyxel.mk new file mode 100644 index 0000000000..e758a50360 --- /dev/null +++ b/target/linux/lantiq/xrx200/profiles/zyxel.mk @@ -0,0 +1,14 @@ +define Profile/P2812HNUFX + NAME:=ZyXEL P-2812HNU-Fx + PACKAGES:=kmod-rt2800-pci wpad-mini \ + kmod-ltq-deu-vr9 kmod-ltq-hcd-vr9 \ + kmod-ltq-vdsl-vr9-mei kmod-ltq-vdsl-vr9 \ + kmod-ltq-atm-vr9 ltq-vdsl-vr9-fw-installer \ + ltq-vdsl-app ppp-mod-pppoa \ + swconfig +endef + +P2812HNUFX_UBIFS_OPTS:="-m 2048 -e 126KiB -c 4096" +P2812HNUFX_UBI_OPTS:="-m 2048 -p 128KiB -s 512" + +$(eval $(call Profile,P2812HNUFX)) |