aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/etrax/config-2.6.29132
-rw-r--r--target/linux/etrax/config-2.6.30 (renamed from target/linux/etrax/config-default)102
-rw-r--r--target/linux/etrax/patches-2.6.29/300-sysfs.patch43
-rw-r--r--target/linux/etrax/patches-2.6.29/600-fix_serial_cris.patch263
-rw-r--r--target/linux/etrax/patches-2.6.30/100-cris-makefiles.patch (renamed from target/linux/etrax/patches-2.6.29/100-cris-makefiles.patch)0
-rw-r--r--target/linux/etrax/patches-2.6.30/200-samsung_flash.patch (renamed from target/linux/etrax/patches-2.6.29/200-samsung_flash.patch)0
-rw-r--r--target/linux/etrax/patches-2.6.30/201-flashsize.patch (renamed from target/linux/etrax/patches-2.6.29/201-flashsize.patch)0
-rw-r--r--target/linux/etrax/patches-2.6.30/400-Kconfig_source.patch (renamed from target/linux/etrax/patches-2.6.29/400-Kconfig_source.patch)0
-rw-r--r--target/linux/etrax/patches-2.6.30/500-i2c_gvc.patch (renamed from target/linux/etrax/patches-2.6.29/500-i2c_gvc.patch)0
9 files changed, 42 insertions, 498 deletions
diff --git a/target/linux/etrax/config-2.6.29 b/target/linux/etrax/config-2.6.29
deleted file mode 100644
index a902188e08..0000000000
--- a/target/linux/etrax/config-2.6.29
+++ /dev/null
@@ -1,132 +0,0 @@
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_BASE_SMALL=0
-CONFIG_BITREVERSE=y
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BOUNCE=y
-# CONFIG_BRIDGE is not set
-# CONFIG_CFG80211 is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
-CONFIG_CRIS=y
-# CONFIG_CRIS_MACH_ARTPEC3 is not set
-# CONFIG_DCB is not set
-CONFIG_DEFAULT_VEGAS=y
-# CONFIG_DEFAULT_WESTWOOD is not set
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-# CONFIG_ETRAX100LX is not set
-CONFIG_ETRAX100LX_V2=y
-# CONFIG_ETRAXFS is not set
-CONFIG_ETRAX_ARCH_V10=y
-# CONFIG_ETRAX_ARCH_V32 is not set
-CONFIG_ETRAX_AXISFLASHMAP=y
-CONFIG_ETRAX_CMDLINE="root=/dev/mtdblock1 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200"
-# CONFIG_ETRAX_CSP0_LEDS is not set
-# CONFIG_ETRAX_DEBUG_PORT0 is not set
-# CONFIG_ETRAX_DEBUG_PORT1 is not set
-# CONFIG_ETRAX_DEBUG_PORT2 is not set
-# CONFIG_ETRAX_DEBUG_PORT3 is not set
-CONFIG_ETRAX_DEBUG_PORT_NULL=y
-CONFIG_ETRAX_DEF_R_BUS_CONFIG=0x4
-CONFIG_ETRAX_DEF_R_PORT_PA_DATA=0xf0
-CONFIG_ETRAX_DEF_R_PORT_PA_DIR=0x1c
-CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG=0x00
-CONFIG_ETRAX_DEF_R_PORT_PB_DATA=0x03
-CONFIG_ETRAX_DEF_R_PORT_PB_DIR=0xce
-CONFIG_ETRAX_DEF_R_SDRAM_CONFIG=0x09603737
-CONFIG_ETRAX_DEF_R_SDRAM_TIMING=0x80008002
-CONFIG_ETRAX_DEF_R_WAITSTATES=0x95f8
-CONFIG_ETRAX_DRAM_SIZE=32
-CONFIG_ETRAX_DRAM_VIRTUAL_BASE=c0000000
-CONFIG_ETRAX_ETHERNET=y
-CONFIG_ETRAX_FAST_TIMER=y
-CONFIG_ETRAX_FLASH1_SIZE=0
-CONFIG_ETRAX_FLASH_BUSWIDTH=2
-CONFIG_ETRAX_GPIO=y
-# CONFIG_ETRAX_I2C is not set
-# CONFIG_ETRAX_I2C_GVC is not set
-# CONFIG_ETRAX_KMALLOCED_MODULES is not set
-CONFIG_ETRAX_LED1G=2
-CONFIG_ETRAX_LED1R=2
-CONFIG_ETRAX_LED2G=3
-CONFIG_ETRAX_LED2R=3
-CONFIG_ETRAX_LED3G=2
-CONFIG_ETRAX_LED3R=2
-CONFIG_ETRAX_NANDFLASH_BUSWIDTH=1
-CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY=y
-# CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK is not set
-# CONFIG_ETRAX_NO_LEDS is not set
-CONFIG_ETRAX_PA_BUTTON_BITMASK=02
-CONFIG_ETRAX_PA_CHANGEABLE_BITS=0xFF
-CONFIG_ETRAX_PA_CHANGEABLE_DIR=0xFF
-CONFIG_ETRAX_PA_LEDS=y
-CONFIG_ETRAX_PB_CHANGEABLE_BITS=0xFF
-CONFIG_ETRAX_PB_CHANGEABLE_DIR=0xFF
-# CONFIG_ETRAX_PB_LEDS is not set
-CONFIG_ETRAX_PTABLE_SECTOR=0
-CONFIG_ETRAX_RESCUE_SER0=y
-# CONFIG_ETRAX_RESCUE_SER1 is not set
-# CONFIG_ETRAX_RESCUE_SER2 is not set
-# CONFIG_ETRAX_RESCUE_SER3 is not set
-CONFIG_ETRAX_SDRAM=y
-# CONFIG_ETRAX_SERIAL is not set
-# CONFIG_ETRAX_SOFT_SHUTDOWN is not set
-# CONFIG_ETRAX_SYNCHRONOUS_SERIAL is not set
-CONFIG_ETRAX_USB_HOST=y
-CONFIG_ETRAX_USB_HOST_PORT1=y
-CONFIG_ETRAX_USB_HOST_PORT2=y
-# CONFIG_ETRAX_VCS_SIM is not set
-# CONFIG_ETRAX_WATCHDOG is not set
-CONFIG_EXT2_FS=y
-CONFIG_FORCE_MAX_ZONEORDER=6
-# CONFIG_FREEZER is not set
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_IOMAP=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_I2C is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_MTDRAM_ABS_POS=0x0
-CONFIG_MTDRAM_ERASE_SIZE=128
-CONFIG_MTDRAM_TOTAL_SIZE=0
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_MTDRAM=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NET_SCH_DRR is not set
-# CONFIG_NF_DEFRAG_IPV4 is not set
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NO_IOPORT=y
-# CONFIG_OOM_REBOOT is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_RTC is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-# CONFIG_SVINTO_SIM is not set
-# CONFIG_SYSTEM_PROFILER is not set
-CONFIG_UID16=y
-CONFIG_USB=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WLAN_80211 is not set
diff --git a/target/linux/etrax/config-default b/target/linux/etrax/config-2.6.30
index fc68fec7df..6bff760ce8 100644
--- a/target/linux/etrax/config-default
+++ b/target/linux/etrax/config-2.6.30
@@ -1,19 +1,17 @@
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_BASE_SMALL=0
+# CONFIG_BINARY_PRINTF is not set
CONFIG_BITREVERSE=y
+# CONFIG_BLK_DEV_INITRD is not set
CONFIG_BOUNCE=y
-CONFIG_CLASSIC_RCU=y
+# CONFIG_BRIDGE is not set
+# CONFIG_CFG80211 is not set
CONFIG_CRIS=y
# CONFIG_CRIS_MACH_ARTPEC3 is not set
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_AUTHENC=m
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO is not set
+CONFIG_DEFAULT_VEGAS=y
+# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_ETRAX100LX is not set
CONFIG_ETRAX100LX_V2=y
# CONFIG_ETRAXFS is not set
@@ -22,11 +20,11 @@ CONFIG_ETRAX_ARCH_V10=y
CONFIG_ETRAX_AXISFLASHMAP=y
CONFIG_ETRAX_CMDLINE="root=/dev/mtdblock1 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200"
# CONFIG_ETRAX_CSP0_LEDS is not set
-# CONFIG_ETRAX_DEBUG_PORT0 is not set
+CONFIG_ETRAX_DEBUG_PORT0=y
# CONFIG_ETRAX_DEBUG_PORT1 is not set
# CONFIG_ETRAX_DEBUG_PORT2 is not set
# CONFIG_ETRAX_DEBUG_PORT3 is not set
-CONFIG_ETRAX_DEBUG_PORT_NULL=y
+# CONFIG_ETRAX_DEBUG_PORT_NULL is not set
CONFIG_ETRAX_DEF_R_BUS_CONFIG=0x4
CONFIG_ETRAX_DEF_R_PORT_PA_DATA=0xf0
CONFIG_ETRAX_DEF_R_PORT_PA_DIR=0x1c
@@ -38,22 +36,13 @@ CONFIG_ETRAX_DEF_R_SDRAM_TIMING=0x80008002
CONFIG_ETRAX_DEF_R_WAITSTATES=0x95f8
CONFIG_ETRAX_DRAM_SIZE=32
CONFIG_ETRAX_DRAM_VIRTUAL_BASE=c0000000
-CONFIG_ETRAX_DS1302=y
-CONFIG_ETRAX_DS1302_RSTBIT=2
-CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT=y
-CONFIG_ETRAX_DS1302_SCLBIT=1
-CONFIG_ETRAX_DS1302_SDABIT=0
-CONFIG_ETRAX_DS1302_TRICKLE_CHARGE=0
CONFIG_ETRAX_ETHERNET=y
CONFIG_ETRAX_FAST_TIMER=y
CONFIG_ETRAX_FLASH1_SIZE=0
CONFIG_ETRAX_FLASH_BUSWIDTH=2
CONFIG_ETRAX_GPIO=y
-CONFIG_ETRAX_I2C=y
-CONFIG_ETRAX_I2C_CLK_PORT=1
-CONFIG_ETRAX_I2C_DATA_PORT=0
-# CONFIG_ETRAX_I2C_EEPROM is not set
-CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C=y
+# CONFIG_ETRAX_I2C is not set
+# CONFIG_ETRAX_I2C_GVC is not set
# CONFIG_ETRAX_KMALLOCED_MODULES is not set
CONFIG_ETRAX_LED1G=2
CONFIG_ETRAX_LED1R=2
@@ -72,14 +61,12 @@ CONFIG_ETRAX_PA_LEDS=y
CONFIG_ETRAX_PB_CHANGEABLE_BITS=0xFF
CONFIG_ETRAX_PB_CHANGEABLE_DIR=0xFF
# CONFIG_ETRAX_PB_LEDS is not set
-# CONFIG_ETRAX_PCF8563 is not set
CONFIG_ETRAX_PTABLE_SECTOR=0
CONFIG_ETRAX_RESCUE_SER0=y
# CONFIG_ETRAX_RESCUE_SER1 is not set
# CONFIG_ETRAX_RESCUE_SER2 is not set
# CONFIG_ETRAX_RESCUE_SER3 is not set
# CONFIG_ETRAX_RS485 is not set
-CONFIG_ETRAX_RTC=y
CONFIG_ETRAX_SDRAM=y
CONFIG_ETRAX_SER0_CD_ON_PA_BIT=-1
CONFIG_ETRAX_SER0_CD_ON_PB_BIT=-1
@@ -93,17 +80,17 @@ CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE=y
# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PB is not set
CONFIG_ETRAX_SER0_RI_ON_PA_BIT=-1
CONFIG_ETRAX_SER0_RI_ON_PB_BIT=-1
-CONFIG_ETRAX_SER2_CD_ON_PA_BIT=7
+CONFIG_ETRAX_SER2_CD_ON_PA_BIT=-1
CONFIG_ETRAX_SER2_CD_ON_PB_BIT=-1
-CONFIG_ETRAX_SER2_DSR_ON_PA_BIT=6
+CONFIG_ETRAX_SER2_DSR_ON_PA_BIT=-1
CONFIG_ETRAX_SER2_DSR_ON_PB_BIT=-1
-CONFIG_ETRAX_SER2_DTR_ON_PA_BIT=4
+CONFIG_ETRAX_SER2_DTR_ON_PA_BIT=-1
CONFIG_ETRAX_SER2_DTR_ON_PB_BIT=-1
# CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED is not set
-# CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE is not set
-CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PA=y
+CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE=y
+# CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PA is not set
# CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PB is not set
-CONFIG_ETRAX_SER2_RI_ON_PA_BIT=5
+CONFIG_ETRAX_SER2_RI_ON_PA_BIT=-1
CONFIG_ETRAX_SER2_RI_ON_PB_BIT=-1
CONFIG_ETRAX_SER3_CD_ON_PA_BIT=-1
CONFIG_ETRAX_SER3_CD_ON_PB_BIT=-1
@@ -144,7 +131,7 @@ CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN=y
# CONFIG_ETRAX_SERIAL_PORT3_DMA9_IN is not set
# CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_IN is not set
# CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_OUT is not set
-CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS=1
+CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS=5
# CONFIG_ETRAX_SOFT_SHUTDOWN is not set
# CONFIG_ETRAX_SYNCHRONOUS_SERIAL is not set
CONFIG_ETRAX_USB_HOST=y
@@ -152,37 +139,24 @@ CONFIG_ETRAX_USB_HOST_PORT1=y
CONFIG_ETRAX_USB_HOST_PORT2=y
# CONFIG_ETRAX_VCS_SIM is not set
# CONFIG_ETRAX_WATCHDOG is not set
-CONFIG_FAT_FS=y
+# CONFIG_FILE_LOCKING is not set
CONFIG_FORCE_MAX_ZONEORDER=6
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FREEZER is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_IOMAP=y
# CONFIG_GEN_RTC is not set
+# CONFIG_HAMRADIO is not set
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_HAVE_IDE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HOSTAP is not set
+CONFIG_HAVE_MLOCK=y
# CONFIG_HW_RANDOM is not set
# CONFIG_I2C is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IDE is not set
-CONFIG_IEEE80211=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_DEBUG=y
-CONFIG_IEEE80211_SOFTMAC=m
-CONFIG_IEEE80211_SOFTMAC_DEBUG=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
-CONFIG_MSDOS_FS=y
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
CONFIG_MTDRAM_ABS_POS=0x0
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTDRAM_TOTAL_SIZE=0
@@ -192,15 +166,22 @@ CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_MTDRAM=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NF_DEFRAG_IPV4 is not set
+CONFIG_NLATTR=y
CONFIG_NO_IOPORT=y
# CONFIG_OOM_REBOOT is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_RTC is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SERIAL_8250 is not set
-CONFIG_SLABINFO=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_SVINTO_SIM is not set
# CONFIG_SYSTEM_PROFILER is not set
CONFIG_UID16=y
@@ -208,7 +189,8 @@ CONFIG_USB=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_SUPPORT=y
-CONFIG_VFAT_FS=y
# CONFIG_VLAN_8021Q is not set
+# CONFIG_WIRELESS_EXT_SYSFS is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WLAN_80211 is not set
diff --git a/target/linux/etrax/patches-2.6.29/300-sysfs.patch b/target/linux/etrax/patches-2.6.29/300-sysfs.patch
deleted file mode 100644
index ffaec36758..0000000000
--- a/target/linux/etrax/patches-2.6.29/300-sysfs.patch
+++ /dev/null
@@ -1,43 +0,0 @@
---- a/drivers/serial/crisv10.c
-+++ b/drivers/serial/crisv10.c
-@@ -27,6 +27,7 @@ static char *serial_version = "$Revision
- #include <linux/kernel.h>
- #include <linux/mutex.h>
- #include <linux/bitops.h>
-+#include <linux/device.h>
-
- #include <asm/io.h>
- #include <asm/irq.h>
-@@ -4393,6 +4394,7 @@ static const struct tty_operations rs_op
- .tiocmset = rs_tiocmset
- };
-
-+static struct class *rs_class;
- static int __init
- rs_init(void)
- {
-@@ -4527,6 +4529,24 @@ rs_init(void)
- #endif
- #endif /* CONFIG_SVINTO_SIM */
-
-+ rs_class = class_create(THIS_MODULE, "rs_tty");
-+#ifdef CONFIG_ETRAX_SERIAL_PORT0
-+ device_create(rs_class, NULL,
-+ MKDEV(TTY_MAJOR, 64), NULL, "ttyS0");
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT1
-+ device_create(rs_class, NULL,
-+ MKDEV(TTY_MAJOR, 65), NULL, "ttyS1");
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT2
-+ device_create(rs_class, NULL,
-+ MKDEV(TTY_MAJOR, 66), NULL, "ttyS2");
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT3
-+ device_create(rs_class, NULL,
-+ MKDEV(TTY_MAJOR, 67), NULL, "ttyS3");
-+#endif
-+
- return 0;
- }
-
diff --git a/target/linux/etrax/patches-2.6.29/600-fix_serial_cris.patch b/target/linux/etrax/patches-2.6.29/600-fix_serial_cris.patch
deleted file mode 100644
index 4032550661..0000000000
--- a/target/linux/etrax/patches-2.6.29/600-fix_serial_cris.patch
+++ /dev/null
@@ -1,263 +0,0 @@
---- a/drivers/serial/crisv10.c
-+++ b/drivers/serial/crisv10.c
-@@ -28,12 +28,15 @@ static char *serial_version = "$Revision
- #include <linux/mutex.h>
- #include <linux/bitops.h>
- #include <linux/device.h>
-+#include <linux/seq_file.h>
-+#include <linux/delay.h>
-+#include <linux/module.h>
-+#include <linux/uaccess.h>
-+#include <linux/io.h>
-
--#include <asm/io.h>
- #include <asm/irq.h>
- #include <asm/dma.h>
- #include <asm/system.h>
--#include <linux/delay.h>
-
- #include <arch/svinto.h>
-
-@@ -457,7 +460,6 @@ static struct e100_serial rs_table[] = {
-
- #define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial))
-
--static struct ktermios *serial_termios[NR_PORTS];
- #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
- static struct fast_timer fast_timers[NR_PORTS];
- #endif
-@@ -4221,151 +4223,132 @@ rs_open(struct tty_struct *tty, struct f
- return 0;
- }
-
-+#ifdef CONFIG_PROC_FS
- /*
- * /proc fs routines....
- */
-
--static int line_info(char *buf, struct e100_serial *info)
-+static void seq_line_info(struct seq_file *m, struct e100_serial *info)
- {
-- char stat_buf[30];
-- int ret;
- unsigned long tmp;
-
-- ret = sprintf(buf, "%d: uart:E100 port:%lX irq:%d",
-- info->line, (unsigned long)info->ioport, info->irq);
-+ seq_printf(m, "%d: uart:E100 port:%lX irq:%d",
-+ info->line, (unsigned long)info->ioport, info->irq);
-
- if (!info->ioport || (info->type == PORT_UNKNOWN)) {
-- ret += sprintf(buf+ret, "\n");
-- return ret;
-+ seq_printf(m, "\n");
-+ return;
- }
-
-- stat_buf[0] = 0;
-- stat_buf[1] = 0;
-- if (!E100_RTS_GET(info))
-- strcat(stat_buf, "|RTS");
-- if (!E100_CTS_GET(info))
-- strcat(stat_buf, "|CTS");
-- if (!E100_DTR_GET(info))
-- strcat(stat_buf, "|DTR");
-- if (!E100_DSR_GET(info))
-- strcat(stat_buf, "|DSR");
-- if (!E100_CD_GET(info))
-- strcat(stat_buf, "|CD");
-- if (!E100_RI_GET(info))
-- strcat(stat_buf, "|RI");
--
-- ret += sprintf(buf+ret, " baud:%d", info->baud);
--
-- ret += sprintf(buf+ret, " tx:%lu rx:%lu",
-+ seq_printf(m, " baud:%d", info->baud);
-+ seq_printf(m, " tx:%lu rx:%lu",
- (unsigned long)info->icount.tx,
- (unsigned long)info->icount.rx);
- tmp = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
-- if (tmp) {
-- ret += sprintf(buf+ret, " tx_pend:%lu/%lu",
-- (unsigned long)tmp,
-- (unsigned long)SERIAL_XMIT_SIZE);
-- }
--
-- ret += sprintf(buf+ret, " rx_pend:%lu/%lu",
-- (unsigned long)info->recv_cnt,
-- (unsigned long)info->max_recv_cnt);
-+ if (tmp)
-+ seq_printf(m, " tx_pend:%lu/%lu",
-+ (unsigned long)tmp,
-+ (unsigned long)SERIAL_XMIT_SIZE);
-+
-+ seq_printf(m, " rx_pend:%lu/%lu",
-+ (unsigned long)info->recv_cnt,
-+ (unsigned long)info->max_recv_cnt);
-
- #if 1
- if (info->port.tty) {
--
- if (info->port.tty->stopped)
-- ret += sprintf(buf+ret, " stopped:%i",
-- (int)info->port.tty->stopped);
-+ seq_printf(m, " stopped:%i",
-+ (int)info->port.tty->stopped);
- if (info->port.tty->hw_stopped)
-- ret += sprintf(buf+ret, " hw_stopped:%i",
-- (int)info->port.tty->hw_stopped);
-+ seq_printf(m, " hw_stopped:%i",
-+ (int)info->port.tty->hw_stopped);
- }
-
- {
- unsigned char rstat = info->ioport[REG_STATUS];
-- if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) )
-- ret += sprintf(buf+ret, " xoff_detect:1");
-+ if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect))
-+ seq_printf(m, " xoff_detect:1");
- }
-
- #endif
-
--
--
--
- if (info->icount.frame)
-- ret += sprintf(buf+ret, " fe:%lu",
-- (unsigned long)info->icount.frame);
-+ seq_printf(m, " fe:%lu", (unsigned long)info->icount.frame);
-
- if (info->icount.parity)
-- ret += sprintf(buf+ret, " pe:%lu",
-- (unsigned long)info->icount.parity);
-+ seq_printf(m, " pe:%lu", (unsigned long)info->icount.parity);
-
- if (info->icount.brk)
-- ret += sprintf(buf+ret, " brk:%lu",
-- (unsigned long)info->icount.brk);
-+ seq_printf(m, " brk:%lu", (unsigned long)info->icount.brk);
-
- if (info->icount.overrun)
-- ret += sprintf(buf+ret, " oe:%lu",
-- (unsigned long)info->icount.overrun);
-+ seq_printf(m, " oe:%lu", (unsigned long)info->icount.overrun);
-
- /*
- * Last thing is the RS-232 status lines
- */
-- ret += sprintf(buf+ret, " %s\n", stat_buf+1);
-- return ret;
-+ if (!E100_RTS_GET(info))
-+ seq_puts(m, "|RTS");
-+ if (!E100_CTS_GET(info))
-+ seq_puts(m, "|CTS");
-+ if (!E100_DTR_GET(info))
-+ seq_puts(m, "|DTR");
-+ if (!E100_DSR_GET(info))
-+ seq_puts(m, "|DSR");
-+ if (!E100_CD_GET(info))
-+ seq_puts(m, "|CD");
-+ if (!E100_RI_GET(info))
-+ seq_puts(m, "|RI");
-+ seq_puts(m, "\n");
- }
-
--int rs_read_proc(char *page, char **start, off_t off, int count,
-- int *eof, void *data)
-+
-+static int crisv10_proc_show(struct seq_file *m, void *v)
- {
-- int i, len = 0, l;
-- off_t begin = 0;
-+ int i;
-+
-+ seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version);
-
-- len += sprintf(page, "serinfo:1.0 driver:%s\n",
-- serial_version);
-- for (i = 0; i < NR_PORTS && len < 4000; i++) {
-+ for (i = 0; i < NR_PORTS; i++) {
- if (!rs_table[i].enabled)
- continue;
-- l = line_info(page + len, &rs_table[i]);
-- len += l;
-- if (len+begin > off+count)
-- goto done;
-- if (len+begin < off) {
-- begin += len;
-- len = 0;
-- }
-+ seq_line_info(m, &rs_table[i]);
- }
- #ifdef DEBUG_LOG_INCLUDED
- for (i = 0; i < debug_log_pos; i++) {
-- len += sprintf(page + len, "%-4i %lu.%lu ", i, debug_log[i].time, timer_data_to_ns(debug_log[i].timer_data));
-- len += sprintf(page + len, debug_log[i].string, debug_log[i].value);
-- if (len+begin > off+count)
-- goto done;
-- if (len+begin < off) {
-- begin += len;
-- len = 0;
-- }
-+ seq_printf(m, "%-4i %lu.%lu ",
-+ i, debug_log[i].time,
-+ timer_data_to_ns(debug_log[i].timer_data));
-+ seq_printf(m, debug_log[i].string, debug_log[i].value);
- }
-- len += sprintf(page + len, "debug_log %i/%i %li bytes\n",
-- i, DEBUG_LOG_SIZE, begin+len);
-+ seq_printf(m, "debug_log %i/%i\n", i, DEBUG_LOG_SIZE);
- debug_log_pos = 0;
- #endif
-+ return 0;
-+}
-
-- *eof = 1;
--done:
-- if (off >= len+begin)
-- return 0;
-- *start = page + (off-begin);
-- return ((count < begin+len-off) ? count : begin+len-off);
-+static int crisv10_proc_open(struct inode *inode, struct file *file)
-+{
-+ return single_open(file, crisv10_proc_show, NULL);
- }
-
-+static const struct file_operations crisv10_proc_fops = {
-+ .owner = THIS_MODULE,
-+ .open = crisv10_proc_open,
-+ .read = seq_read,
-+ .llseek = seq_lseek,
-+ .release = single_release,
-+};
-+#endif
-+
-+
- /* Finally, routines used to initialize the serial driver. */
-
--static void
--show_serial_version(void)
-+static void show_serial_version(void)
- {
- printk(KERN_INFO
-- "ETRAX 100LX serial-driver %s, (c) 2000-2004 Axis Communications AB\r\n",
-+ "ETRAX 100LX serial-driver %s, "
-+ "(c) 2000-2004 Axis Communications AB\r\n",
- &serial_version[11]); /* "$Revision: x.yy" */
- }
-
-@@ -4389,9 +4372,11 @@ static const struct tty_operations rs_op
- .break_ctl = rs_break,
- .send_xchar = rs_send_xchar,
- .wait_until_sent = rs_wait_until_sent,
-- .read_proc = rs_read_proc,
- .tiocmget = rs_tiocmget,
-- .tiocmset = rs_tiocmset
-+ .tiocmset = rs_tiocmset,
-+#ifdef CONFIG_PROC_FS
-+ .proc_fops = &crisv10_proc_fops,
-+#endif
- };
-
- static struct class *rs_class;
diff --git a/target/linux/etrax/patches-2.6.29/100-cris-makefiles.patch b/target/linux/etrax/patches-2.6.30/100-cris-makefiles.patch
index bf43914f73..bf43914f73 100644
--- a/target/linux/etrax/patches-2.6.29/100-cris-makefiles.patch
+++ b/target/linux/etrax/patches-2.6.30/100-cris-makefiles.patch
diff --git a/target/linux/etrax/patches-2.6.29/200-samsung_flash.patch b/target/linux/etrax/patches-2.6.30/200-samsung_flash.patch
index d04c2794d4..d04c2794d4 100644
--- a/target/linux/etrax/patches-2.6.29/200-samsung_flash.patch
+++ b/target/linux/etrax/patches-2.6.30/200-samsung_flash.patch
diff --git a/target/linux/etrax/patches-2.6.29/201-flashsize.patch b/target/linux/etrax/patches-2.6.30/201-flashsize.patch
index 42a467f749..42a467f749 100644
--- a/target/linux/etrax/patches-2.6.29/201-flashsize.patch
+++ b/target/linux/etrax/patches-2.6.30/201-flashsize.patch
diff --git a/target/linux/etrax/patches-2.6.29/400-Kconfig_source.patch b/target/linux/etrax/patches-2.6.30/400-Kconfig_source.patch
index ed2bfe459f..ed2bfe459f 100644
--- a/target/linux/etrax/patches-2.6.29/400-Kconfig_source.patch
+++ b/target/linux/etrax/patches-2.6.30/400-Kconfig_source.patch
diff --git a/target/linux/etrax/patches-2.6.29/500-i2c_gvc.patch b/target/linux/etrax/patches-2.6.30/500-i2c_gvc.patch
index dc63165c5e..dc63165c5e 100644
--- a/target/linux/etrax/patches-2.6.29/500-i2c_gvc.patch
+++ b/target/linux/etrax/patches-2.6.30/500-i2c_gvc.patch