aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/xburst
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/xburst')
-rw-r--r--target/linux/xburst/config-3.3281
-rw-r--r--target/linux/xburst/id800wt/config-3.352
-rw-r--r--target/linux/xburst/n516/config-3.311
-rw-r--r--target/linux/xburst/n526/config-3.31
-rw-r--r--target/linux/xburst/patches-3.3/0001-ubi-Read-only-the-vid-header-instead-of-the-whole-pa.patch21
-rw-r--r--target/linux/xburst/patches-3.3/0002-Add-jz4740-udc-driver.patch2371
-rw-r--r--target/linux/xburst/patches-3.3/0003-NAND-Optimize-NAND_ECC_HW_OOB_FIRST-read.patch40
-rw-r--r--target/linux/xburst/patches-3.3/0004-NAND-Add-support-for-subpage-reads-for-NAND_ECC_HW_O.patch144
-rw-r--r--target/linux/xburst/patches-3.3/0005-NAND-Optimize-reading-the-eec-data-for-the-JZ4740.patch53
-rw-r--r--target/linux/xburst/patches-3.3/0006-MTD-NAND-JZ4740-Multi-bank-support-with-autodetectio.patch417
-rw-r--r--target/linux/xburst/patches-3.3/0007-Add-ili8960-lcd-driver.patch304
-rw-r--r--target/linux/xburst/patches-3.3/0008-qi_lb60-Don-t-use-3-wire-spi-mode-for-the-display-fo.patch21
-rw-r--r--target/linux/xburst/patches-3.3/0009-dev-mem-Add-kernel-config-option-to-omit-this-device.patch124
-rw-r--r--target/linux/xburst/patches-3.3/0010-cpufreq_stats-Support-runtime-changes-to-frequency-t.patch301
-rw-r--r--target/linux/xburst/patches-3.3/0011-MIPS-JZ4740-Added-setting-of-PLL-rate-and-main-divid.patch351
-rw-r--r--target/linux/xburst/patches-3.3/0012-MIPS-JZ4740-Add-cpufreq-support.patch298
-rw-r--r--target/linux/xburst/patches-3.3/0013-MMC-JZ4740-Added-support-for-CPU-frequency-changing.patch129
-rw-r--r--target/linux/xburst/patches-3.3/0014-MIPS-JZ4740-reset-Initialize-hibernate-wakeup-counte.patch91
-rw-r--r--target/linux/xburst/patches-3.3/0015-ASoC-JZ4740-Replaced-comma-operators-with-semicolons.patch31
-rw-r--r--target/linux/xburst/patches-3.3/0016-ASoC-JZ4740-Support-buffer-size-that-is-not-a-multip.patch89
-rw-r--r--target/linux/xburst/patches-3.3/0017-MIPS-JZ4740-qi_lb60-Look-for-NAND-chip-in-bank-1.patch21
-rw-r--r--target/linux/xburst/patches-3.3/0018-ASoC-jz4740-Convert-qi_lb60-to-use-snd_soc_register_.patch121
-rw-r--r--target/linux/xburst/patches-3.3/0019-Framebuffer-notifier-Call-notifier-callbacks-prior-t.patch38
-rw-r--r--target/linux/xburst/patches-3.3/0020-qi_lb60-NAND-add-data-partition.patch26
-rw-r--r--target/linux/xburst/patches-3.3/0021-rtc-jz4740-fix-hwclock-give-time-out.patch20
-rw-r--r--target/linux/xburst/qi_lb60/config-3.333
26 files changed, 0 insertions, 5389 deletions
diff --git a/target/linux/xburst/config-3.3 b/target/linux/xburst/config-3.3
deleted file mode 100644
index 4654a53906..0000000000
--- a/target/linux/xburst/config-3.3
+++ /dev/null
@@ -1,281 +0,0 @@
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_ARPD is not set
-CONFIG_BATTERY_JZ4740=y
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_BRIDGE is not set
-CONFIG_CHARGER_GPIO=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_CPUFREQ=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_XZ=y
-CONFIG_DEVMEM=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ELF_CORE=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXT4_FS=y
-CONFIG_FAT_FS=y
-CONFIG_FB=y
-CONFIG_FB_JZ4740=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-# CONFIG_FB_WMT_GE_ROPS is not set
-CONFIG_FONTS=y
-# CONFIG_FONT_10x18 is not set
-CONFIG_FONT_6x11=y
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_SUN8x16 is not set
-CONFIG_FORCE_MAX_ZONEORDER=12
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FREEZER=y
-CONFIG_FS_MBCACHE=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GPIOLIB=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PWM=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_HW_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_INLINE_READ_UNLOCK is not set
-# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_UNLOCK is not set
-# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_UNLOCK is not set
-# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
-CONFIG_INPUT=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_PWM_BEEPER is not set
-CONFIG_INPUT_UINPUT=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_JBD2=y
-CONFIG_JZ4740_QI_LB60=y
-CONFIG_KALLSYMS=y
-CONFIG_KEXEC=y
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=2
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACH_JZ4740=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_JZ4740_ADC=y
-CONFIG_MIPS=y
-CONFIG_MIPS_CPUFREQ=y
-CONFIG_MIPS_FPU_EMU=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_JZ4740=y
-CONFIG_MMC_UNSAFE_RESUME=y
-# CONFIG_MOUSE_BCM5974 is not set
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_PS2_ALPS is not set
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
-# CONFIG_MOUSE_PS2_SYNAPTICS is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_PS2_TRACKPOINT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_JZ4740=y
-# CONFIG_MTD_SM_COMMON is not set
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_DEBUG is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-# CONFIG_NETWORK_FILESYSTEMS is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_NLS=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_CODEPAGE_1251=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=y
-CONFIG_NLS_CODEPAGE_775=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_CODEPAGE_855=y
-CONFIG_NLS_CODEPAGE_857=y
-CONFIG_NLS_CODEPAGE_860=y
-CONFIG_NLS_CODEPAGE_861=y
-CONFIG_NLS_CODEPAGE_862=y
-CONFIG_NLS_CODEPAGE_863=y
-CONFIG_NLS_CODEPAGE_864=y
-CONFIG_NLS_CODEPAGE_865=y
-CONFIG_NLS_CODEPAGE_866=y
-CONFIG_NLS_CODEPAGE_869=y
-CONFIG_NLS_CODEPAGE_874=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_CODEPAGE_936=y
-CONFIG_NLS_CODEPAGE_949=y
-CONFIG_NLS_CODEPAGE_950=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_13=y
-CONFIG_NLS_ISO8859_14=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_ISO8859_3=y
-CONFIG_NLS_ISO8859_4=y
-CONFIG_NLS_ISO8859_5=y
-CONFIG_NLS_ISO8859_6=y
-CONFIG_NLS_ISO8859_7=y
-CONFIG_NLS_ISO8859_8=y
-CONFIG_NLS_ISO8859_9=y
-CONFIG_NLS_KOI8_R=y
-CONFIG_NLS_KOI8_U=y
-CONFIG_NLS_UTF8=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-# CONFIG_PDA_POWER is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_COUNT=y
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_RCU=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PROC_PAGE_MONITOR=y
-# CONFIG_RCU_BOOST is not set
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_CMOS is not set
-CONFIG_RTC_DRV_JZ4740=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SENSORS_JZ4740 is not set
-CONFIG_SERIO=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SND=y
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_JACK=y
-CONFIG_SND_JZ4740_SOC=y
-CONFIG_SND_JZ4740_SOC_I2S=y
-CONFIG_SND_JZ4740_SOC_QI_LB60=y
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-CONFIG_SND_PCM=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-CONFIG_SND_SOC=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_I2C_AND_SPI=y
-CONFIG_SND_SOC_JZ4740_CODEC=y
-CONFIG_SND_TIMER=y
-CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_STAGING is not set
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-# CONFIG_SYN_COOKIES is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_TINY_PREEMPT_RCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-# CONFIG_UBIFS_FS_DEBUG is not set
-CONFIG_UBIFS_FS_LZO=y
-# CONFIG_UBIFS_FS_XATTR is not set
-CONFIG_UBIFS_FS_XZ=y
-CONFIG_UBIFS_FS_ZLIB=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB_ARCH_HAS_XHCI is not set
-# CONFIG_USB_AUDIO is not set
-CONFIG_USB_COMMON=y
-CONFIG_USB_ETH=y
-# CONFIG_USB_ETH_EEM is not set
-# CONFIG_USB_ETH_RNDIS is not set
-CONFIG_USB_FUSB300=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_JZ4740 is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_VFAT_FS=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_VLAN_8021Q is not set
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_WATCHDOG is not set
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/xburst/id800wt/config-3.3 b/target/linux/xburst/id800wt/config-3.3
deleted file mode 100644
index 9d2ae4be97..0000000000
--- a/target/linux/xburst/id800wt/config-3.3
+++ /dev/null
@@ -1,52 +0,0 @@
-# CONFIG_BACKLIGHT_ADP8860 is not set
-# CONFIG_BACKLIGHT_ADP8870 is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_INPUT_PWM_BEEPER=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_MATRIX=y
-# CONFIG_LCD_AMS369FG06 is not set
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_ILI8960=y
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LD9040 is not set
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_PLATFORM is not set
-# CONFIG_LCD_S6E63M0 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_REGMAP_SPI=y
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
-# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_BU21013 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EGALAX is not set
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-# CONFIG_TOUCHSCREEN_MAX11801 is not set
-# CONFIG_TOUCHSCREEN_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_ST1232 is not set
-# CONFIG_TOUCHSCREEN_TSC2005 is not set
-# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
-CONFIG_USB=y
-# CONFIG_USB_DUMMY_HCD is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_HCD_PLATFORM is not set
-CONFIG_USB_STORAGE=y
diff --git a/target/linux/xburst/n516/config-3.3 b/target/linux/xburst/n516/config-3.3
deleted file mode 100644
index bc781d6fd5..0000000000
--- a/target/linux/xburst/n516/config-3.3
+++ /dev/null
@@ -1,11 +0,0 @@
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_METRONOME=m
-CONFIG_FB_SYS_FOPS=m
-CONFIG_HWMON=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_PWM is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_NEW_LEDS=y
-# CONFIG_SENSORS_JZ4740 is not set
-CONFIG_SENSORS_LM75=y
diff --git a/target/linux/xburst/n526/config-3.3 b/target/linux/xburst/n526/config-3.3
deleted file mode 100644
index b89d18d435..0000000000
--- a/target/linux/xburst/n526/config-3.3
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_I2C_ALGOBIT=y
diff --git a/target/linux/xburst/patches-3.3/0001-ubi-Read-only-the-vid-header-instead-of-the-whole-pa.patch b/target/linux/xburst/patches-3.3/0001-ubi-Read-only-the-vid-header-instead-of-the-whole-pa.patch
deleted file mode 100644
index 51f81cfcf8..0000000000
--- a/target/linux/xburst/patches-3.3/0001-ubi-Read-only-the-vid-header-instead-of-the-whole-pa.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 73aab29ddc44a3e1a7156473ad5bc9cd80704274 Mon Sep 17 00:00:00 2001
-From: Lars-Peter Clausen <lars@metafoo.de>
-Date: Tue, 15 Mar 2011 12:49:15 +0100
-Subject: [PATCH 01/21] ubi: Read only the vid header instead of the whole
- page
-
----
- drivers/mtd/ubi/io.c | 2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
---- a/drivers/mtd/ubi/io.c
-+++ b/drivers/mtd/ubi/io.c
-@@ -1030,7 +1030,7 @@ int ubi_io_read_vid_hdr(struct ubi_devic
-
- p = (char *)vid_hdr - ubi->vid_hdr_shift;
- read_err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset,
-- ubi->vid_hdr_alsize);
-+ UBI_VID_HDR_SIZE + ubi->vid_hdr_shift);
- if (read_err && read_err != UBI_IO_BITFLIPS && !mtd_is_eccerr(read_err))
- return read_err;
-
diff --git a/target/linux/xburst/patches-3.3/0002-Add-jz4740-udc-driver.patch b/target/linux/xburst/patches-3.3/0002-Add-jz4740-udc-driver.patch
deleted file mode 100644
index 9986ce08d9..0000000000
--- a/target/linux/xburst/patches-3.3/0002-Add-jz4740-udc-driver.patch
+++ /dev/null
@@ -1,2371 +0,0 @@
-From 537082e01849ca85227c5b462b8ac9aceb11b77a Mon Sep 17 00:00:00 2001
-From: Lars-Peter Clausen <lars@metafoo.de>
-Date: Sat, 24 Apr 2010 12:18:46 +0200
-Subject: [PATCH 02/21] Add jz4740 udc driver
-
-History:
-- driver by Ingenic
-- patch by Lars-Peter Clausen.
-- updated to 3.1 by Maarten ter Huurne
----
- drivers/usb/gadget/Kconfig | 8 +
- drivers/usb/gadget/Makefile | 1 +
- drivers/usb/gadget/gadget_chips.h | 3 +
- drivers/usb/gadget/jz4740_udc.c | 2199 +++++++++++++++++++++++++++++++++++++
- drivers/usb/gadget/jz4740_udc.h | 101 ++
- 5 files changed, 2312 insertions(+), 0 deletions(-)
- create mode 100644 drivers/usb/gadget/jz4740_udc.c
- create mode 100644 drivers/usb/gadget/jz4740_udc.h
-
---- a/drivers/usb/gadget/Kconfig
-+++ b/drivers/usb/gadget/Kconfig
-@@ -178,6 +178,14 @@ config USB_FUSB300
- help
- Faraday usb device controller FUSB300 driver
-
-+config USB_JZ4740
-+ tristate "JZ4740 UDC"
-+ depends on MACH_JZ4740
-+ select USB_GADGET_DUALSPEED
-+ help
-+ Select this to support the Ingenic JZ4740 processor
-+ high speed USB device controller.
-+
- config USB_OMAP
- tristate "OMAP USB Device Controller"
- depends on ARCH_OMAP
---- a/drivers/usb/gadget/Makefile
-+++ b/drivers/usb/gadget/Makefile
-@@ -31,6 +31,7 @@ obj-$(CONFIG_USB_MV_UDC) += mv_udc.o
- mv_udc-y := mv_udc_core.o
- obj-$(CONFIG_USB_CI13XXX_MSM) += ci13xxx_msm.o
- obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o
-+obj-$(CONFIG_USB_JZ4740) += jz4740_udc.o
-
- #
- # USB gadget drivers
---- a/drivers/usb/gadget/gadget_chips.h
-+++ b/drivers/usb/gadget/gadget_chips.h
-@@ -36,6 +36,7 @@
- #define gadget_is_fsl_usb2(g) (!strcmp("fsl-usb2-udc", (g)->name))
- #define gadget_is_goku(g) (!strcmp("goku_udc", (g)->name))
- #define gadget_is_imx(g) (!strcmp("imx_udc", (g)->name))
-+#define gadget_is_jz4740(g) (!strcmp("ingenic_hsusb", (g)->name))
- #define gadget_is_langwell(g) (!strcmp("langwell_udc", (g)->name))
- #define gadget_is_m66592(g) (!strcmp("m66592_udc", (g)->name))
- #define gadget_is_musbhdrc(g) (!strcmp("musb-hdrc", (g)->name))
-@@ -118,6 +119,8 @@ static inline int usb_gadget_controller_
- return 0x31;
- else if (gadget_is_dwc3(gadget))
- return 0x32;
-+ else if (gadget_is_jz4740(gadget))
-+ return 0x33;
-
- return -ENOENT;
- }
---- /dev/null
-+++ b/drivers/usb/gadget/jz4740_udc.c
-@@ -0,0 +1,2199 @@
-+/*
-+ * linux/drivers/usb/gadget/jz4740_udc.c
-+ *
-+ * Ingenic JZ4740 on-chip high speed USB device controller
-+ *
-+ * Copyright (C) 2006 - 2008 Ingenic Semiconductor Inc.
-+ * Author: <jlwei@ingenic.cn>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+/*
-+ * This device has ep0, two bulk-in/interrupt-in endpoints, and one bulk-out endpoint.
-+ *
-+ * - Endpoint numbering is fixed: ep0, ep1in-int, ep2in-bulk, ep1out-bulk.
-+ * - DMA works with bulk-in (channel 1) and bulk-out (channel 2) endpoints.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/ioport.h>
-+#include <linux/slab.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/list.h>
-+#include <linux/interrupt.h>
-+#include <linux/proc_fs.h>
-+#include <linux/usb.h>
-+#include <linux/usb/gadget.h>
-+#include <linux/clk.h>
-+
-+#include <asm/byteorder.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/system.h>
-+#include <asm/mach-jz4740/clock.h>
-+
-+#include "jz4740_udc.h"
-+
-+#define JZ_REG_UDC_FADDR 0x00 /* Function Address 8-bit */
-+#define JZ_REG_UDC_POWER 0x01 /* Power Management 8-bit */
-+#define JZ_REG_UDC_INTRIN 0x02 /* Interrupt IN 16-bit */
-+#define JZ_REG_UDC_INTROUT 0x04 /* Interrupt OUT 16-bit */
-+#define JZ_REG_UDC_INTRINE 0x06 /* Intr IN enable 16-bit */
-+#define JZ_REG_UDC_INTROUTE 0x08 /* Intr OUT enable 16-bit */
-+#define JZ_REG_UDC_INTRUSB 0x0a /* Interrupt USB 8-bit */
-+#define JZ_REG_UDC_INTRUSBE 0x0b /* Interrupt USB Enable 8-bit */
-+#define JZ_REG_UDC_FRAME 0x0c /* Frame number 16-bit */
-+#define JZ_REG_UDC_INDEX 0x0e /* Index register 8-bit */
-+#define JZ_REG_UDC_TESTMODE 0x0f /* USB test mode 8-bit */
-+
-+#define JZ_REG_UDC_CSR0 0x12 /* EP0 CSR 8-bit */
-+#define JZ_REG_UDC_INMAXP 0x10 /* EP1-2 IN Max Pkt Size 16-bit */
-+#define JZ_REG_UDC_INCSR 0x12 /* EP1-2 IN CSR LSB 8/16bit */
-+#define JZ_REG_UDC_INCSRH 0x13 /* EP1-2 IN CSR MSB 8-bit */
-+
-+#define JZ_REG_UDC_OUTMAXP 0x14 /* EP1 OUT Max Pkt Size 16-bit */
-+#define JZ_REG_UDC_OUTCSR 0x16 /* EP1 OUT CSR LSB 8/16bit */
-+#define JZ_REG_UDC_OUTCSRH 0x17 /* EP1 OUT CSR MSB 8-bit */
-+#define JZ_REG_UDC_OUTCOUNT 0x18 /* bytes in EP0/1 OUT FIFO 16-bit */
-+
-+#define JZ_REG_UDC_EP_FIFO(x) (4 * (x) + 0x20)
-+
-+#define JZ_REG_UDC_EPINFO 0x78 /* Endpoint information */
-+#define JZ_REG_UDC_RAMINFO 0x79 /* RAM information */
-+
-+#define JZ_REG_UDC_INTR 0x200 /* DMA pending interrupts */
-+#define JZ_REG_UDC_CNTL1 0x204 /* DMA channel 1 control */
-+#define JZ_REG_UDC_ADDR1 0x208 /* DMA channel 1 AHB memory addr */
-+#define JZ_REG_UDC_COUNT1 0x20c /* DMA channel 1 byte count */
-+#define JZ_REG_UDC_CNTL2 0x214 /* DMA channel 2 control */
-+#define JZ_REG_UDC_ADDR2 0x218 /* DMA channel 2 AHB memory addr */
-+#define JZ_REG_UDC_COUNT2 0x21c /* DMA channel 2 byte count */
-+
-+/* Power register bit masks */
-+#define USB_POWER_SUSPENDM 0x01
-+#define USB_POWER_RESUME 0x04
-+#define USB_POWER_HSMODE 0x10
-+#define USB_POWER_HSENAB 0x20
-+#define USB_POWER_SOFTCONN 0x40
-+
-+/* Interrupt register bit masks */
-+#define USB_INTR_SUSPEND 0x01
-+#define USB_INTR_RESUME 0x02
-+#define USB_INTR_RESET 0x04
-+
-+#define USB_INTR_EP0 0x0001
-+#define USB_INTR_INEP1 0x0002
-+#define USB_INTR_INEP2 0x0004
-+#define USB_INTR_OUTEP1 0x0002
-+
-+/* CSR0 bit masks */
-+#define USB_CSR0_OUTPKTRDY 0x01
-+#define USB_CSR0_INPKTRDY 0x02
-+#define USB_CSR0_SENTSTALL 0x04
-+#define USB_CSR0_DATAEND 0x08
-+#define USB_CSR0_SETUPEND 0x10
-+#define USB_CSR0_SENDSTALL 0x20
-+#define USB_CSR0_SVDOUTPKTRDY 0x40
-+#define USB_CSR0_SVDSETUPEND 0x80
-+
-+/* Endpoint CSR register bits */
-+#define USB_INCSRH_AUTOSET 0x80
-+#define USB_INCSRH_ISO 0x40
-+#define USB_INCSRH_MODE 0x20
-+#define USB_INCSRH_DMAREQENAB 0x10
-+#define USB_INCSRH_DMAREQMODE 0x04
-+#define USB_INCSR_CDT 0x40
-+#define USB_INCSR_SENTSTALL 0x20
-+#define USB_INCSR_SENDSTALL 0x10
-+#define USB_INCSR_FF 0x08
-+#define USB_INCSR_UNDERRUN 0x04
-+#define USB_INCSR_FFNOTEMPT 0x02
-+#define USB_INCSR_INPKTRDY 0x01
-+
-+#define USB_OUTCSRH_AUTOCLR 0x80
-+#define USB_OUTCSRH_ISO 0x40
-+#define USB_OUTCSRH_DMAREQENAB 0x20
-+#define USB_OUTCSRH_DNYT 0x10
-+#define USB_OUTCSRH_DMAREQMODE 0x08
-+#define USB_OUTCSR_CDT 0x80
-+#define USB_OUTCSR_SENTSTALL 0x40
-+#define USB_OUTCSR_SENDSTALL 0x20
-+#define USB_OUTCSR_FF 0x10
-+#define USB_OUTCSR_DATAERR 0x08
-+#define USB_OUTCSR_OVERRUN 0x04
-+#define USB_OUTCSR_FFFULL 0x02
-+#define USB_OUTCSR_OUTPKTRDY 0x01
-+
-+/* DMA control bits */
-+#define USB_CNTL_ENA 0x01
-+#define USB_CNTL_DIR_IN 0x02
-+#define USB_CNTL_MODE_1 0x04
-+#define USB_CNTL_INTR_EN 0x08
-+#define USB_CNTL_EP(n) ((n) << 4)
-+#define USB_CNTL_BURST_0 (0 << 9)
-+#define USB_CNTL_BURST_4 (1 << 9)
-+#define USB_CNTL_BURST_8 (2 << 9)
-+#define USB_CNTL_BURST_16 (3 << 9)
-+
-+
-+#ifndef DEBUG
-+# define DEBUG(fmt,args...) do {} while(0)
-+#endif
-+#ifndef DEBUG_EP0
-+# define NO_STATES
-+# define DEBUG_EP0(fmt,args...) do {} while(0)
-+#endif
-+#ifndef DEBUG_SETUP
-+# define DEBUG_SETUP(fmt,args...) do {} while(0)
-+#endif
-+
-+static struct jz4740_udc jz4740_udc_controller;
-+
-+/*
-+ * Local declarations.
-+ */
-+static int jz4740_udc_start(struct usb_gadget_driver *driver,
-+ int (*bind)(struct usb_gadget *));
-+static int jz4740_udc_stop(struct usb_gadget_driver *driver);
-+static void jz4740_ep0_kick(struct jz4740_udc *dev, struct jz4740_ep *ep);
-+static void jz4740_handle_ep0(struct jz4740_udc *dev, uint32_t intr);
-+
-+static void done(struct jz4740_ep *ep, struct jz4740_request *req,
-+ int status);
-+static void pio_irq_enable(struct jz4740_ep *ep);
-+static void pio_irq_disable(struct jz4740_ep *ep);
-+static void stop_activity(struct jz4740_udc *dev,
-+ struct usb_gadget_driver *driver);
-+static void nuke(struct jz4740_ep *ep, int status);
-+static void flush(struct jz4740_ep *ep);
-+static void udc_set_address(struct jz4740_udc *dev, unsigned char address);
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* inline functions of register read/write/set/clear */
-+
-+static inline uint8_t usb_readb(struct jz4740_udc *udc, size_t reg)
-+{
-+ return readb(udc->base + reg);
-+}
-+
-+static inline uint16_t usb_readw(struct jz4740_udc *udc, size_t reg)
-+{
-+ return readw(udc->base + reg);
-+}
-+
-+static inline uint32_t usb_readl(struct jz4740_udc *udc, size_t reg)
-+{
-+ return readl(udc->base + reg);
-+}
-+
-+static inline void usb_writeb(struct jz4740_udc *udc, size_t reg, uint8_t val)
-+{
-+ writeb(val, udc->base + reg);
-+}
-+
-+static inline void usb_writew(struct jz4740_udc *udc, size_t reg, uint16_t val)
-+{
-+ writew(val, udc->base + reg);
-+}
-+
-+static inline void usb_writel(struct jz4740_udc *udc, size_t reg, uint32_t val)
-+{
-+ writel(val, udc->base + reg);
-+}
-+
-+static inline void usb_setb(struct jz4740_udc *udc, size_t reg, uint8_t mask)
-+{
-+ usb_writeb(udc, reg, usb_readb(udc, reg) | mask);
-+}
-+
-+static inline void usb_setw(struct jz4740_udc *udc, size_t reg, uint16_t mask)
-+{
-+ usb_writew(udc, reg, usb_readw(udc, reg) | mask);
-+}
-+
-+static inline void usb_clearb(struct jz4740_udc *udc, size_t reg, uint8_t mask)
-+{
-+ usb_writeb(udc, reg, usb_readb(udc, reg) & ~mask);
-+}
-+
-+static inline void usb_clearw(struct jz4740_udc *udc, size_t reg, uint16_t mask)
-+{
-+ usb_writew(udc, reg, usb_readw(udc, reg) & ~mask);
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static inline void jz_udc_set_index(struct jz4740_udc *udc, uint8_t index)
-+{
-+ usb_writeb(udc, JZ_REG_UDC_INDEX, index);
-+}
-+
-+static inline void jz_udc_select_ep(struct jz4740_ep *ep)
-+{
-+ jz_udc_set_index(ep->dev, ep_index(ep));
-+}
-+
-+static inline int write_packet(struct jz4740_ep *ep,
-+ struct jz4740_request *req, unsigned int count)
-+{
-+ uint8_t *buf;
-+ unsigned int length;
-+ void __iomem *fifo = ep->dev->base + ep->fifo;
-+
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ buf = req->req.buf + req->req.actual;
-+
-+ length = req->req.length - req->req.actual;
-+ if (length > count)
-+ length = count;
-+ req->req.actual += length;
-+
-+ DEBUG("Write %d (count %d), fifo %x\n", length, count, ep->fifo);
-+
-+ writesl(fifo, buf, length >> 2);
-+ writesb(fifo, &buf[length - (length & 3)], length & 3);
-+
-+ return length;
-+}
-+
-+static int read_packet(struct jz4740_ep *ep,
-+ struct jz4740_request *req, unsigned int count)
-+{
-+ uint8_t *buf;
-+ unsigned int length;
-+ void __iomem *fifo = ep->dev->base + ep->fifo;
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ buf = req->req.buf + req->req.actual;
-+
-+ length = req->req.length - req->req.actual;
-+ if (length > count)
-+ length = count;
-+ req->req.actual += length;
-+
-+ DEBUG("Read %d, fifo %x\n", length, ep->fifo);
-+
-+ readsl(fifo, buf, length >> 2);
-+ readsb(fifo, &buf[length - (length & 3)], length & 3);
-+
-+ return length;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * udc_disable - disable USB device controller
-+ */
-+static void udc_disable(struct jz4740_udc *dev)
-+{
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ udc_set_address(dev, 0);
-+
-+ /* Disable interrupts */
-+ usb_writew(dev, JZ_REG_UDC_INTRINE, 0);
-+ usb_writew(dev, JZ_REG_UDC_INTROUTE, 0);
-+ usb_writeb(dev, JZ_REG_UDC_INTRUSBE, 0);
-+
-+ /* Disable DMA */
-+ usb_writel(dev, JZ_REG_UDC_CNTL1, 0);
-+ usb_writel(dev, JZ_REG_UDC_CNTL2, 0);
-+
-+ /* Disconnect from usb */
-+ usb_clearb(dev, JZ_REG_UDC_POWER, USB_POWER_SOFTCONN);
-+
-+ /* Disable the USB PHY */
-+ clk_disable(dev->clk);
-+
-+ dev->ep0state = WAIT_FOR_SETUP;
-+ dev->gadget.speed = USB_SPEED_UNKNOWN;
-+
-+ return;
-+}
-+
-+/*
-+ * udc_reinit - initialize software state
-+ */
-+static void udc_reinit(struct jz4740_udc *dev)
-+{
-+ int i;
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ /* device/ep0 records init */
-+ INIT_LIST_HEAD(&dev->gadget.ep_list);
-+ INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
-+ dev->ep0state = WAIT_FOR_SETUP;
-+
-+ for (i = 0; i < UDC_MAX_ENDPOINTS; i++) {
-+ struct jz4740_ep *ep = &dev->ep[i];
-+
-+ if (i != 0)
-+ list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
-+
-+ INIT_LIST_HEAD(&ep->queue);
-+ ep->desc = 0;
-+ ep->stopped = 0;
-+ }
-+}
-+
-+/* until it's enabled, this UDC should be completely invisible
-+ * to any USB host.
-+ */
-+static void udc_enable(struct jz4740_udc *dev)
-+{
-+ int i;
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ /* UDC state is incorrect - Added by River */
-+ if (dev->state != UDC_STATE_ENABLE) {
-+ return;
-+ }
-+
-+ dev->gadget.speed = USB_SPEED_UNKNOWN;
-+
-+ /* Flush FIFO for each */
-+ for (i = 0; i < UDC_MAX_ENDPOINTS; i++) {
-+ struct jz4740_ep *ep = &dev->ep[i];
-+
-+ jz_udc_select_ep(ep);
-+ flush(ep);
-+ }
-+
-+ /* Set this bit to allow the UDC entering low-power mode when
-+ * there are no actions on the USB bus.
-+ * UDC still works during this bit was set.
-+ */
-+ jz4740_clock_udc_enable_auto_suspend();
-+
-+ /* Enable the USB PHY */
-+ clk_enable(dev->clk);
-+
-+ /* Disable interrupts */
-+/* usb_writew(dev, JZ_REG_UDC_INTRINE, 0);
-+ usb_writew(dev, JZ_REG_UDC_INTROUTE, 0);
-+ usb_writeb(dev, JZ_REG_UDC_INTRUSBE, 0);*/
-+
-+ /* Enable interrupts */
-+ usb_setw(dev, JZ_REG_UDC_INTRINE, USB_INTR_EP0);
-+ usb_setb(dev, JZ_REG_UDC_INTRUSBE, USB_INTR_RESET);
-+ /* Don't enable rest of the interrupts */
-+ /* usb_setw(dev, JZ_REG_UDC_INTRINE, USB_INTR_INEP1 | USB_INTR_INEP2);
-+ usb_setw(dev, JZ_REG_UDC_INTROUTE, USB_INTR_OUTEP1); */
-+
-+ /* Enable SUSPEND */
-+ /* usb_setb(dev, JZ_REG_UDC_POWER, USB_POWER_SUSPENDM); */
-+
-+ /* Enable HS Mode */
-+ usb_setb(dev, JZ_REG_UDC_POWER, USB_POWER_HSENAB);
-+
-+ /* Let host detect UDC:
-+ * Software must write a 1 to the PMR:USB_POWER_SOFTCONN bit to turn this
-+ * transistor on and pull the USBDP pin HIGH.
-+ */
-+ usb_setb(dev, JZ_REG_UDC_POWER, USB_POWER_SOFTCONN);
-+
-+ return;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* keeping it simple:
-+ * - one bus driver, initted first;
-+ * - one function driver, initted second
-+ */
-+
-+/*
-+ * Register entry point for the peripheral controller driver.
-+ */
-+
-+static int jz4740_udc_start(struct usb_gadget_driver *driver,
-+ int (*bind)(struct usb_gadget *))
-+{
-+ struct jz4740_udc *dev = &jz4740_udc_controller;
-+ int retval;
-+
-+ if (!driver || !bind)
-+ return -EINVAL;
-+
-+ if (!dev)
-+ return -ENODEV;
-+
-+ if (dev->driver)
-+ return -EBUSY;
-+
-+ /* hook up the driver */
-+ dev->driver = driver;
-+ dev->gadget.dev.driver = &driver->driver;
-+
-+ retval = bind(&dev->gadget);
-+ if (retval) {
-+ DEBUG("%s: bind to driver %s --> error %d\n", dev->gadget.name,
-+ driver->driver.name, retval);
-+ dev->driver = 0;
-+ return retval;
-+ }
-+
-+ /* then enable host detection and ep0; and we're ready
-+ * for set_configuration as well as eventual disconnect.
-+ */
-+ udc_enable(dev);
-+
-+ DEBUG("%s: registered gadget driver '%s'\n", dev->gadget.name,
-+ driver->driver.name);
-+
-+ return 0;
-+}
-+
-+static void stop_activity(struct jz4740_udc *dev,
-+ struct usb_gadget_driver *driver)
-+{
-+ int i;
-+
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ /* don't disconnect drivers more than once */
-+ if (dev->gadget.speed == USB_SPEED_UNKNOWN)
-+ driver = 0;
-+ dev->gadget.speed = USB_SPEED_UNKNOWN;
-+
-+ /* prevent new request submissions, kill any outstanding requests */
-+ for (i = 0; i < UDC_MAX_ENDPOINTS; i++) {
-+ struct jz4740_ep *ep = &dev->ep[i];
-+
-+ ep->stopped = 1;
-+
-+ jz_udc_select_ep(ep);
-+ nuke(ep, -ESHUTDOWN);
-+ }
-+
-+ /* report disconnect; the driver is already quiesced */
-+ if (driver) {
-+ spin_unlock(&dev->lock);
-+ driver->disconnect(&dev->gadget);
-+ spin_lock(&dev->lock);
-+ }
-+
-+ /* re-init driver-visible data structures */
-+ udc_reinit(dev);
-+}
-+
-+
-+/*
-+ * Unregister entry point for the peripheral controller driver.
-+ */
-+static int jz4740_udc_stop(struct usb_gadget_driver *driver)
-+{
-+ struct jz4740_udc *dev = &jz4740_udc_controller;
-+ unsigned long flags;
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ if (!dev)
-+ return -ENODEV;
-+ if (!driver || driver != dev->driver)
-+ return -EINVAL;
-+ if (!driver->unbind)
-+ return -EBUSY;
-+
-+ spin_lock_irqsave(&dev->lock, flags);
-+ dev->driver = 0;
-+ stop_activity(dev, driver);
-+ spin_unlock_irqrestore(&dev->lock, flags);
-+
-+ driver->unbind(&dev->gadget);
-+
-+ udc_disable(dev);
-+
-+ DEBUG("unregistered driver '%s'\n", driver->driver.name);
-+
-+ return 0;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/** Write request to FIFO (max write == maxp size)
-+ * Return: 0 = still running, 1 = completed, negative = errno
-+ * NOTE: INDEX register must be set for EP
-+ */
-+static int write_fifo(struct jz4740_ep *ep, struct jz4740_request *req)
-+{
-+ struct jz4740_udc *dev = ep->dev;
-+ uint32_t max, csr;
-+
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+ max = le16_to_cpu(ep->desc->wMaxPacketSize);
-+
-+ csr = usb_readb(dev, ep->csr);
-+
-+ if (!(csr & USB_INCSR_FFNOTEMPT)) {
-+ unsigned count;
-+ int is_last, is_short;
-+
-+ count = write_packet(ep, req, max);
-+ usb_setb(dev, ep->csr, USB_INCSR_INPKTRDY);
-+
-+ /* last packet is usually short (or a zlp) */
-+ if (unlikely(count != max))
-+ is_last = is_short = 1;
-+ else {
-+ if (likely(req->req.length != req->req.actual)
-+ || req->req.zero)
-+ is_last = 0;
-+ else
-+ is_last = 1;
-+ /* interrupt/iso maxpacket may not fill the fifo */
-+ is_short = unlikely(max < ep_maxpacket(ep));
-+ }
-+
-+ DEBUG("%s: wrote %s %d bytes%s%s %d left %p\n", __FUNCTION__,
-+ ep->ep.name, count,
-+ is_last ? "/L" : "", is_short ? "/S" : "",
-+ req->req.length - req->req.actual, req);
-+
-+ /* requests complete when all IN data is in the FIFO */
-+ if (is_last) {
-+ done(ep, req, 0);
-+ if (list_empty(&ep->queue)) {
-+ pio_irq_disable(ep);
-+ }
-+ return 1;
-+ }
-+ } else {
-+ DEBUG("Hmm.. %d ep FIFO is not empty!\n", ep_index(ep));
-+ }
-+
-+ return 0;
-+}
-+
-+/** Read to request from FIFO (max read == bytes in fifo)
-+ * Return: 0 = still running, 1 = completed, negative = errno
-+ * NOTE: INDEX register must be set for EP
-+ */
-+static int read_fifo(struct jz4740_ep *ep, struct jz4740_request *req)
-+{
-+ struct jz4740_udc *dev = ep->dev;
-+ uint32_t csr;
-+ unsigned count, is_short;
-+
-+ /* make sure there's a packet in the FIFO. */
-+ csr = usb_readb(dev, ep->csr);
-+ if (!(csr & USB_OUTCSR_OUTPKTRDY)) {
-+ DEBUG("%s: Packet NOT ready!\n", __FUNCTION__);
-+ return -EINVAL;
-+ }
-+
-+ /* read all bytes from this packet */
-+ count = usb_readw(dev, JZ_REG_UDC_OUTCOUNT);
-+
-+ is_short = (count < ep->ep.maxpacket);
-+
-+ count = read_packet(ep, req, count);
-+
-+ DEBUG("read %s %02x, %d bytes%s req %p %d/%d\n",
-+ ep->ep.name, csr, count,
-+ is_short ? "/S" : "", req, req->req.actual, req->req.length);
-+
-+ /* Clear OutPktRdy */
-+ usb_clearb(dev, ep->csr, USB_OUTCSR_OUTPKTRDY);
-+
-+ /* completion */
-+ if (is_short || req->req.actual == req->req.length) {
-+ done(ep, req, 0);
-+
-+ if (list_empty(&ep->queue))
-+ pio_irq_disable(ep);
-+ return 1;
-+ }
-+
-+ /* finished that packet. the next one may be waiting... */
-+ return 0;
-+}
-+
-+/*
-+ * done - retire a request; caller blocked irqs
-+ * INDEX register is preserved to keep same
-+ */
-+static void done(struct jz4740_ep *ep, struct jz4740_request *req, int status)
-+{
-+ unsigned int stopped = ep->stopped;
-+ uint32_t index;
-+
-+ DEBUG("%s, %p\n", __FUNCTION__, ep);
-+ list_del_init(&req->queue);
-+
-+ if (likely(req->req.status == -EINPROGRESS))
-+ req->req.status = status;
-+ else
-+ status = req->req.status;
-+
-+ if (status && status != -ESHUTDOWN)
-+ DEBUG("complete %s req %p stat %d len %u/%u\n",
-+ ep->ep.name, &req->req, status,
-+ req->req.actual, req->req.length);
-+
-+ /* don't modify queue heads during completion callback */
-+ ep->stopped = 1;
-+ /* Read current index (completion may modify it) */
-+ index = usb_readb(ep->dev, JZ_REG_UDC_INDEX);
-+ spin_unlock_irqrestore(&ep->dev->lock, ep->dev->lock_flags);
-+
-+ req->req.complete(&ep->ep, &req->req);
-+
-+ spin_lock_irqsave(&ep->dev->lock, ep->dev->lock_flags);
-+ /* Restore index */
-+ jz_udc_set_index(ep->dev, index);
-+ ep->stopped = stopped;
-+}
-+
-+static inline unsigned int jz4740_udc_ep_irq_enable_reg(struct jz4740_ep *ep)
-+{
-+ if (ep_is_in(ep))
-+ return JZ_REG_UDC_INTRINE;
-+ else
-+ return JZ_REG_UDC_INTROUTE;
-+}
-+
-+/** Enable EP interrupt */
-+static void pio_irq_enable(struct jz4740_ep *ep)
-+{
-+ DEBUG("%s: EP%d %s\n", __FUNCTION__, ep_index(ep), ep_is_in(ep) ? "IN": "OUT");
-+
-+ usb_setw(ep->dev, jz4740_udc_ep_irq_enable_reg(ep), BIT(ep_index(ep)));
-+}
-+
-+/** Disable EP interrupt */
-+static void pio_irq_disable(struct jz4740_ep *ep)
-+{
-+ DEBUG("%s: EP%d %s\n", __FUNCTION__, ep_index(ep), ep_is_in(ep) ? "IN": "OUT");
-+
-+ usb_clearw(ep->dev, jz4740_udc_ep_irq_enable_reg(ep), BIT(ep_index(ep)));
-+}
-+
-+/*
-+ * nuke - dequeue ALL requests
-+ */
-+static void nuke(struct jz4740_ep *ep, int status)
-+{
-+ struct jz4740_request *req;
-+
-+ DEBUG("%s, %p\n", __FUNCTION__, ep);
-+
-+ /* Flush FIFO */
-+ flush(ep);
-+
-+ /* called with irqs blocked */
-+ while (!list_empty(&ep->queue)) {
-+ req = list_entry(ep->queue.next, struct jz4740_request, queue);
-+ done(ep, req, status);
-+ }
-+
-+ /* Disable IRQ if EP is enabled (has descriptor) */
-+ if (ep->desc)
-+ pio_irq_disable(ep);
-+}
-+
-+/** Flush EP FIFO
-+ * NOTE: INDEX register must be set before this call
-+ */
-+static void flush(struct jz4740_ep *ep)
-+{
-+ DEBUG("%s: %s\n", __FUNCTION__, ep->ep.name);
-+
-+ switch (ep->type) {
-+ case ep_bulk_in:
-+ case ep_interrupt:
-+ usb_setb(ep->dev, ep->csr, USB_INCSR_FF);
-+ break;
-+ case ep_bulk_out:
-+ usb_setb(ep->dev, ep->csr, USB_OUTCSR_FF);
-+ break;
-+ case ep_control:
-+ break;
-+ }
-+}
-+
-+/**
-+ * jz4740_in_epn - handle IN interrupt
-+ */
-+static void jz4740_in_epn(struct jz4740_udc *dev, uint32_t ep_idx, uint32_t intr)
-+{
-+ uint32_t csr;
-+ struct jz4740_ep *ep = &dev->ep[ep_idx + 1];
-+ struct jz4740_request *req;
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ jz_udc_select_ep(ep);
-+
-+ csr = usb_readb(dev, ep->csr);
-+ DEBUG("%s: %d, csr %x\n", __FUNCTION__, ep_idx, csr);
-+
-+ if (csr & USB_INCSR_SENTSTALL) {
-+ DEBUG("USB_INCSR_SENTSTALL\n");
-+ usb_clearb(dev, ep->csr, USB_INCSR_SENTSTALL);
-+ return;
-+ }
-+
-+ if (!ep->desc) {
-+ DEBUG("%s: NO EP DESC\n", __FUNCTION__);
-+ return;
-+ }
-+
-+ if (!list_empty(&ep->queue)) {
-+ req = list_first_entry(&ep->queue, struct jz4740_request, queue);
-+ write_fifo(ep, req);
-+ }
-+}
-+
-+/*
-+ * Bulk OUT (recv)
-+ */
-+static void jz4740_out_epn(struct jz4740_udc *dev, uint32_t ep_idx, uint32_t intr)
-+{
-+ struct jz4740_ep *ep = &dev->ep[ep_idx];
-+ struct jz4740_request *req;
-+
-+ DEBUG("%s: %d\n", __FUNCTION__, ep_idx);
-+
-+ jz_udc_select_ep(ep);
-+ if (ep->desc) {
-+ uint32_t csr;
-+
-+ while ((csr = usb_readb(dev, ep->csr)) &
-+ (USB_OUTCSR_OUTPKTRDY | USB_OUTCSR_SENTSTALL)) {
-+ DEBUG("%s: %x\n", __FUNCTION__, csr);
-+
-+ if (csr & USB_OUTCSR_SENTSTALL) {
-+ DEBUG("%s: stall sent, flush fifo\n",
-+ __FUNCTION__);
-+ /* usb_set(USB_OUT_CSR1_FIFO_FLUSH, ep->csr1); */
-+ flush(ep);
-+ } else if (csr & USB_OUTCSR_OUTPKTRDY) {
-+ if (list_empty(&ep->queue))
-+ req = 0;
-+ else
-+ req =
-+ list_entry(ep->queue.next,
-+ struct jz4740_request,
-+ queue);
-+
-+ if (!req) {
-+ DEBUG("%s: NULL REQ %d\n",
-+ __FUNCTION__, ep_idx);
-+ break;
-+ } else {
-+ read_fifo(ep, req);
-+ }
-+ }
-+ }
-+ } else {
-+ /* Throw packet away.. */
-+ DEBUG("%s: ep %p ep_indx %d No descriptor?!?\n", __FUNCTION__, ep, ep_idx);
-+ flush(ep);
-+ }
-+}
-+
-+/** Halt specific EP
-+ * Return 0 if success
-+ * NOTE: Sets INDEX register to EP !
-+ */
-+static int jz4740_set_halt(struct usb_ep *_ep, int value)
-+{
-+ struct jz4740_udc *dev;
-+ struct jz4740_ep *ep;
-+ unsigned long flags;
-+
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ ep = container_of(_ep, struct jz4740_ep, ep);
-+ if (unlikely(!_ep || (!ep->desc && ep->type != ep_control))) {
-+ DEBUG("%s, bad ep\n", __FUNCTION__);
-+ return -EINVAL;
-+ }
-+
-+ dev = ep->dev;
-+
-+ spin_lock_irqsave(&dev->lock, flags);
-+
-+ jz_udc_select_ep(ep);
-+
-+ DEBUG("%s, ep %d, val %d\n", __FUNCTION__, ep_index(ep), value);
-+
-+ if (ep_index(ep) == 0) {
-+ /* EP0 */
-+ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SENDSTALL);
-+ } else if (ep_is_in(ep)) {
-+ uint32_t csr = usb_readb(dev, ep->csr);
-+ if (value && ((csr & USB_INCSR_FFNOTEMPT)
-+ || !list_empty(&ep->queue))) {
-+ /*
-+ * Attempts to halt IN endpoints will fail (returning -EAGAIN)
-+ * if any transfer requests are still queued, or if the controller
-+ * FIFO still holds bytes that the host hasnÂ’t collected.
-+ */
-+ spin_unlock_irqrestore(&dev->lock, flags);
-+ DEBUG
-+ ("Attempt to halt IN endpoint failed (returning -EAGAIN) %d %d\n",
-+ (csr & USB_INCSR_FFNOTEMPT),
-+ !list_empty(&ep->queue));
-+ return -EAGAIN;
-+ }
-+ flush(ep);
-+ if (value) {
-+ usb_setb(dev, ep->csr, USB_INCSR_SENDSTALL);
-+ } else {
-+ usb_clearb(dev, ep->csr, USB_INCSR_SENDSTALL);
-+ usb_setb(dev, ep->csr, USB_INCSR_CDT);
-+ }
-+ } else {
-+
-+ flush(ep);
-+ if (value) {
-+ usb_setb(dev, ep->csr, USB_OUTCSR_SENDSTALL);
-+ } else {
-+ usb_clearb(dev, ep->csr, USB_OUTCSR_SENDSTALL);
-+ usb_setb(dev, ep->csr, USB_OUTCSR_CDT);
-+ }
-+ }
-+
-+ ep->stopped = value;
-+
-+ spin_unlock_irqrestore(&dev->lock, flags);
-+
-+ DEBUG("%s %s halted\n", _ep->name, value == 0 ? "NOT" : "IS");
-+
-+ return 0;
-+}
-+
-+
-+static int jz4740_ep_enable(struct usb_ep *_ep,
-+ const struct usb_endpoint_descriptor *desc)
-+{
-+ struct jz4740_ep *ep;
-+ struct jz4740_udc *dev;
-+ unsigned long flags;
-+ uint32_t max, csrh = 0;
-+
-+ DEBUG("%s: trying to enable %s\n", __FUNCTION__, _ep->name);
-+
-+ if (!_ep || !desc)
-+ return -EINVAL;
-+
-+ ep = container_of(_ep, struct jz4740_ep, ep);
-+ if (ep->desc || ep->type == ep_control
-+ || desc->bDescriptorType != USB_DT_ENDPOINT
-+ || ep->bEndpointAddress != desc->bEndpointAddress) {
-+ DEBUG("%s, bad ep or descriptor\n", __FUNCTION__);
-+ return -EINVAL;
-+ }
-+
-+ /* xfer types must match, except that interrupt ~= bulk */
-+ if (ep->bmAttributes != desc->bmAttributes
-+ && ep->bmAttributes != USB_ENDPOINT_XFER_BULK
-+ && desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
-+ DEBUG("%s, %s type mismatch\n", __FUNCTION__, _ep->name);
-+ return -EINVAL;
-+ }
-+
-+ dev = ep->dev;
-+ if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
-+ DEBUG("%s, bogus device state\n", __FUNCTION__);
-+ return -ESHUTDOWN;
-+ }
-+
-+ max = le16_to_cpu(desc->wMaxPacketSize);
-+
-+ spin_lock_irqsave(&ep->dev->lock, flags);
-+
-+ /* Configure the endpoint */
-+ jz_udc_select_ep(ep);
-+ if (ep_is_in(ep)) {
-+ usb_writew(dev, JZ_REG_UDC_INMAXP, max);
-+ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
-+ case USB_ENDPOINT_XFER_BULK:
-+ case USB_ENDPOINT_XFER_INT:
-+ csrh &= ~USB_INCSRH_ISO;
-+ break;
-+ case USB_ENDPOINT_XFER_ISOC:
-+ csrh |= USB_INCSRH_ISO;
-+ break;
-+ }
-+ usb_writeb(dev, JZ_REG_UDC_INCSRH, csrh);
-+ }
-+ else {
-+ usb_writew(dev, JZ_REG_UDC_OUTMAXP, max);
-+ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
-+ case USB_ENDPOINT_XFER_BULK:
-+ csrh &= ~USB_OUTCSRH_ISO;
-+ break;
-+ case USB_ENDPOINT_XFER_INT:
-+ csrh &= ~USB_OUTCSRH_ISO;
-+ csrh |= USB_OUTCSRH_DNYT;
-+ break;
-+ case USB_ENDPOINT_XFER_ISOC:
-+ csrh |= USB_OUTCSRH_ISO;
-+ break;
-+ }
-+ usb_writeb(dev, JZ_REG_UDC_OUTCSRH, csrh);
-+ }
-+
-+
-+ ep->stopped = 0;
-+ ep->desc = desc;
-+ ep->ep.maxpacket = max;
-+
-+ spin_unlock_irqrestore(&ep->dev->lock, flags);
-+
-+ /* Reset halt state (does flush) */
-+ jz4740_set_halt(_ep, 0);
-+
-+ DEBUG("%s: enabled %s\n", __FUNCTION__, _ep->name);
-+
-+ return 0;
-+}
-+
-+/** Disable EP
-+ * NOTE: Sets INDEX register
-+ */
-+static int jz4740_ep_disable(struct usb_ep *_ep)
-+{
-+ struct jz4740_ep *ep;
-+ unsigned long flags;
-+
-+ DEBUG("%s, %p\n", __FUNCTION__, _ep);
-+
-+ ep = container_of(_ep, struct jz4740_ep, ep);
-+ if (!_ep || !ep->desc) {
-+ DEBUG("%s, %s not enabled\n", __FUNCTION__,
-+ _ep ? ep->ep.name : NULL);
-+ return -EINVAL;
-+ }
-+
-+ spin_lock_irqsave(&ep->dev->lock, flags);
-+
-+ jz_udc_select_ep(ep);
-+
-+ /* Nuke all pending requests (does flush) */
-+ nuke(ep, -ESHUTDOWN);
-+
-+ /* Disable ep IRQ */
-+ pio_irq_disable(ep);
-+
-+ ep->desc = 0;
-+ ep->stopped = 1;
-+
-+ spin_unlock_irqrestore(&ep->dev->lock, flags);
-+
-+ DEBUG("%s: disabled %s\n", __FUNCTION__, _ep->name);
-+ return 0;
-+}
-+
-+static struct usb_request *jz4740_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
-+{
-+ struct jz4740_request *req;
-+
-+ req = kzalloc(sizeof(*req), gfp_flags);
-+ if (!req)
-+ return NULL;
-+
-+ INIT_LIST_HEAD(&req->queue);
-+
-+ return &req->req;
-+}
-+
-+static void jz4740_free_request(struct usb_ep *ep, struct usb_request *_req)
-+{
-+ struct jz4740_request *req;
-+
-+ req = container_of(_req, struct jz4740_request, req);
-+ WARN_ON(!list_empty(&req->queue));
-+
-+ kfree(req);
-+}
-+
-+/*--------------------------------------------------------------------*/
-+
-+/** Queue one request
-+ * Kickstart transfer if needed
-+ * NOTE: Sets INDEX register
-+ */
-+static int jz4740_queue(struct usb_ep *_ep, struct usb_request *_req,
-+ gfp_t gfp_flags)
-+{
-+ struct jz4740_request *req;
-+ struct jz4740_ep *ep;
-+ struct jz4740_udc *dev;
-+
-+ DEBUG("%s, %p\n", __FUNCTION__, _ep);
-+
-+ req = container_of(_req, struct jz4740_request, req);
-+ if (unlikely
-+ (!_req || !_req->complete || !_req->buf
-+ || !list_empty(&req->queue))) {
-+ DEBUG("%s, bad params\n", __FUNCTION__);
-+ return -EINVAL;
-+ }
-+
-+ ep = container_of(_ep, struct jz4740_ep, ep);
-+ if (unlikely(!_ep || (!ep->desc && ep->type != ep_control))) {
-+ DEBUG("%s, bad ep\n", __FUNCTION__);
-+ return -EINVAL;
-+ }
-+
-+ dev = ep->dev;
-+ if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) {
-+ DEBUG("%s, bogus device state %p\n", __FUNCTION__, dev->driver);
-+ return -ESHUTDOWN;
-+ }
-+
-+ DEBUG("%s queue req %p, len %d buf %p\n", _ep->name, _req, _req->length,
-+ _req->buf);
-+
-+ spin_lock_irqsave(&dev->lock, dev->lock_flags);
-+
-+ _req->status = -EINPROGRESS;
-+ _req->actual = 0;
-+
-+ /* kickstart this i/o queue? */
-+ DEBUG("Add to %d Q %d %d\n", ep_index(ep), list_empty(&ep->queue),
-+ ep->stopped);
-+ if (list_empty(&ep->queue) && likely(!ep->stopped)) {
-+ uint32_t csr;
-+
-+ if (unlikely(ep_index(ep) == 0)) {
-+ /* EP0 */
-+ list_add_tail(&req->queue, &ep->queue);
-+ jz4740_ep0_kick(dev, ep);
-+ req = 0;
-+ }
-+ else if (ep_is_in(ep)) {
-+ /* EP1 & EP2 */
-+ jz_udc_select_ep(ep);
-+ csr = usb_readb(dev, ep->csr);
-+ pio_irq_enable(ep);
-+ if (!(csr & USB_INCSR_FFNOTEMPT)) {
-+ if (write_fifo(ep, req) == 1)
-+ req = 0;
-+ }
-+ } else {
-+ /* EP1 */
-+ jz_udc_select_ep(ep);
-+ csr = usb_readb(dev, ep->csr);
-+ pio_irq_enable(ep);
-+ if (csr & USB_OUTCSR_OUTPKTRDY) {
-+ if (read_fifo(ep, req) == 1)
-+ req = 0;
-+ }
-+ }
-+ }
-+
-+ /* pio or dma irq handler advances the queue. */
-+ if (likely(req != 0))
-+ list_add_tail(&req->queue, &ep->queue);
-+
-+ spin_unlock_irqrestore(&dev->lock, dev->lock_flags);
-+
-+ return 0;
-+}
-+
-+/* dequeue JUST ONE request */
-+static int jz4740_dequeue(struct usb_ep *_ep, struct usb_request *_req)
-+{
-+ struct jz4740_ep *ep;
-+ struct jz4740_request *req;
-+ unsigned long flags;
-+
-+ DEBUG("%s, %p\n", __FUNCTION__, _ep);
-+
-+ ep = container_of(_ep, struct jz4740_ep, ep);
-+ if (!_ep || ep->type == ep_control)
-+ return -EINVAL;
-+
-+ spin_lock_irqsave(&ep->dev->lock, flags);
-+
-+ /* make sure it's actually queued on this endpoint */
-+ list_for_each_entry(req, &ep->queue, queue) {
-+ if (&req->req == _req)
-+ break;
-+ }
-+ if (&req->req != _req) {
-+ spin_unlock_irqrestore(&ep->dev->lock, flags);
-+ return -EINVAL;
-+ }
-+ done(ep, req, -ECONNRESET);
-+
-+ spin_unlock_irqrestore(&ep->dev->lock, flags);
-+ return 0;
-+}
-+
-+/** Return bytes in EP FIFO
-+ * NOTE: Sets INDEX register to EP
-+ */
-+static int jz4740_fifo_status(struct usb_ep *_ep)
-+{
-+ uint32_t csr;
-+ int count = 0;
-+ struct jz4740_ep *ep;
-+ unsigned long flags;
-+
-+ ep = container_of(_ep, struct jz4740_ep, ep);
-+ if (!_ep) {
-+ DEBUG("%s, bad ep\n", __FUNCTION__);
-+ return -ENODEV;
-+ }
-+
-+ DEBUG("%s, %d\n", __FUNCTION__, ep_index(ep));
-+
-+ /* LPD can't report unclaimed bytes from IN fifos */
-+ if (ep_is_in(ep))
-+ return -EOPNOTSUPP;
-+
-+ spin_lock_irqsave(&ep->dev->lock, flags);
-+ jz_udc_select_ep(ep);
-+
-+ csr = usb_readb(ep->dev, ep->csr);
-+ if (ep->dev->gadget.speed != USB_SPEED_UNKNOWN ||
-+ csr & 0x1) {
-+ count = usb_readw(ep->dev, JZ_REG_UDC_OUTCOUNT);
-+ }
-+
-+ spin_unlock_irqrestore(&ep->dev->lock, flags);
-+
-+ return count;
-+}
-+
-+/** Flush EP FIFO
-+ * NOTE: Sets INDEX register to EP
-+ */
-+static void jz4740_fifo_flush(struct usb_ep *_ep)
-+{
-+ struct jz4740_ep *ep;
-+ unsigned long flags;
-+
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ ep = container_of(_ep, struct jz4740_ep, ep);
-+ if (unlikely(!_ep || (!ep->desc && ep->type == ep_control))) {
-+ DEBUG("%s, bad ep\n", __FUNCTION__);
-+ return;
-+ }
-+
-+ spin_lock_irqsave(&ep->dev->lock, flags);
-+
-+ jz_udc_select_ep(ep);
-+ flush(ep);
-+
-+ spin_unlock_irqrestore(&ep->dev->lock, flags);
-+}
-+
-+/****************************************************************/
-+/* End Point 0 related functions */
-+/****************************************************************/
-+
-+/* return: 0 = still running, 1 = completed, negative = errno */
-+static int write_fifo_ep0(struct jz4740_ep *ep, struct jz4740_request *req)
-+{
-+ uint32_t max;
-+ unsigned count;
-+ int is_last;
-+
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+ max = ep_maxpacket(ep);
-+
-+ count = write_packet(ep, req, max);
-+
-+ /* last packet is usually short (or a zlp) */
-+ if (unlikely(count != max))
-+ is_last = 1;
-+ else {
-+ if (likely(req->req.length != req->req.actual) || req->req.zero)
-+ is_last = 0;
-+ else
-+ is_last = 1;
-+ }
-+
-+ DEBUG_EP0("%s: wrote %s %d bytes%s %d left %p\n", __FUNCTION__,
-+ ep->ep.name, count,
-+ is_last ? "/L" : "", req->req.length - req->req.actual, req);
-+
-+ /* requests complete when all IN data is in the FIFO */
-+ if (is_last) {
-+ done(ep, req, 0);
-+ return 1;
-+ }
-+
-+ return 0;
-+}
-+
-+static inline int jz4740_fifo_read(struct jz4740_ep *ep,
-+ unsigned char *cp, int max)
-+{
-+ int bytes;
-+ int count = usb_readw(ep->dev, JZ_REG_UDC_OUTCOUNT);
-+
-+ if (count > max)
-+ count = max;
-+ bytes = count;
-+ while (count--)
-+ *cp++ = usb_readb(ep->dev, ep->fifo);
-+
-+ return bytes;
-+}
-+
-+static inline void jz4740_fifo_write(struct jz4740_ep *ep,
-+ unsigned char *cp, int count)
-+{
-+ DEBUG("fifo_write: %d %d\n", ep_index(ep), count);
-+ while (count--)
-+ usb_writeb(ep->dev, ep->fifo, *cp++);
-+}
-+
-+static int read_fifo_ep0(struct jz4740_ep *ep, struct jz4740_request *req)
-+{
-+ struct jz4740_udc *dev = ep->dev;
-+ uint32_t csr;
-+ uint8_t *buf;
-+ unsigned bufferspace, count, is_short;
-+
-+ DEBUG_EP0("%s\n", __FUNCTION__);
-+
-+ csr = usb_readb(dev, JZ_REG_UDC_CSR0);
-+ if (!(csr & USB_CSR0_OUTPKTRDY))
-+ return 0;
-+
-+ buf = req->req.buf + req->req.actual;
-+ prefetchw(buf);
-+ bufferspace = req->req.length - req->req.actual;
-+
-+ /* read all bytes from this packet */
-+ if (likely(csr & USB_CSR0_OUTPKTRDY)) {
-+ count = usb_readw(dev, JZ_REG_UDC_OUTCOUNT);
-+ req->req.actual += min(count, bufferspace);
-+ } else /* zlp */
-+ count = 0;
-+
-+ is_short = (count < ep->ep.maxpacket);
-+ DEBUG_EP0("read %s %02x, %d bytes%s req %p %d/%d\n",
-+ ep->ep.name, csr, count,
-+ is_short ? "/S" : "", req, req->req.actual, req->req.length);
-+
-+ while (likely(count-- != 0)) {
-+ uint8_t byte = (uint8_t)usb_readl(dev, ep->fifo);
-+
-+ if (unlikely(bufferspace == 0)) {
-+ /* this happens when the driver's buffer
-+ * is smaller than what the host sent.
-+ * discard the extra data.
-+ */
-+ if (req->req.status != -EOVERFLOW)
-+ DEBUG_EP0("%s overflow %d\n", ep->ep.name,
-+ count);
-+ req->req.status = -EOVERFLOW;
-+ } else {
-+ *buf++ = byte;
-+ bufferspace--;
-+ }
-+ }
-+
-+ /* completion */
-+ if (is_short || req->req.actual == req->req.length) {
-+ done(ep, req, 0);
-+ return 1;
-+ }
-+
-+ /* finished that packet. the next one may be waiting... */
-+ return 0;
-+}
-+
-+/**
-+ * udc_set_address - set the USB address for this device
-+ * @address:
-+ *
-+ * Called from control endpoint function after it decodes a set address setup packet.
-+ */
-+static void udc_set_address(struct jz4740_udc *dev, unsigned char address)
-+{
-+ DEBUG_EP0("%s: %d\n", __FUNCTION__, address);
-+
-+ usb_writeb(dev, JZ_REG_UDC_FADDR, address);
-+}
-+
-+/*
-+ * DATA_STATE_RECV (USB_CSR0_OUTPKTRDY)
-+ * - if error
-+ * set USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND | USB_CSR0_SENDSTALL bits
-+ * - else
-+ * set USB_CSR0_SVDOUTPKTRDY bit
-+ if last set USB_CSR0_DATAEND bit
-+ */
-+static void jz4740_ep0_out(struct jz4740_udc *dev, uint32_t csr, int kickstart)
-+{
-+ struct jz4740_request *req;
-+ struct jz4740_ep *ep = &dev->ep[0];
-+ int ret;
-+
-+ DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
-+
-+ if (list_empty(&ep->queue))
-+ req = 0;
-+ else
-+ req = list_entry(ep->queue.next, struct jz4740_request, queue);
-+
-+ if (req) {
-+ if (req->req.length == 0) {
-+ DEBUG_EP0("ZERO LENGTH OUT!\n");
-+ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));
-+ dev->ep0state = WAIT_FOR_SETUP;
-+ return;
-+ } else if (kickstart) {
-+ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY));
-+ return;
-+ }
-+ ret = read_fifo_ep0(ep, req);
-+ if (ret) {
-+ /* Done! */
-+ DEBUG_EP0("%s: finished, waiting for status\n",
-+ __FUNCTION__);
-+ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));
-+ dev->ep0state = WAIT_FOR_SETUP;
-+ } else {
-+ /* Not done yet.. */
-+ DEBUG_EP0("%s: not finished\n", __FUNCTION__);
-+ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SVDOUTPKTRDY);
-+ }
-+ } else {
-+ DEBUG_EP0("NO REQ??!\n");
-+ }
-+}
-+
-+/*
-+ * DATA_STATE_XMIT
-+ */
-+static int jz4740_ep0_in(struct jz4740_udc *dev, uint32_t csr)
-+{
-+ struct jz4740_request *req;
-+ struct jz4740_ep *ep = &dev->ep[0];
-+ int ret, need_zlp = 0;
-+
-+ DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
-+
-+ if (list_empty(&ep->queue))
-+ req = 0;
-+ else
-+ req = list_entry(ep->queue.next, struct jz4740_request, queue);
-+
-+ if (!req) {
-+ DEBUG_EP0("%s: NULL REQ\n", __FUNCTION__);
-+ return 0;
-+ }
-+
-+ if (req->req.length == 0) {
-+ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_INPKTRDY | USB_CSR0_DATAEND));
-+ dev->ep0state = WAIT_FOR_SETUP;
-+ return 1;
-+ }
-+
-+ if (req->req.length - req->req.actual == EP0_MAXPACKETSIZE) {
-+ /* Next write will end with the packet size, */
-+ /* so we need zero-length-packet */
-+ need_zlp = 1;
-+ }
-+
-+ ret = write_fifo_ep0(ep, req);
-+
-+ if (ret == 1 && !need_zlp) {
-+ /* Last packet */
-+ DEBUG_EP0("%s: finished, waiting for status\n", __FUNCTION__);
-+
-+ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_INPKTRDY | USB_CSR0_DATAEND));
-+ dev->ep0state = WAIT_FOR_SETUP;
-+ } else {
-+ DEBUG_EP0("%s: not finished\n", __FUNCTION__);
-+ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_INPKTRDY);
-+ }
-+
-+ if (need_zlp) {
-+ DEBUG_EP0("%s: Need ZLP!\n", __FUNCTION__);
-+ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_INPKTRDY);
-+ dev->ep0state = DATA_STATE_NEED_ZLP;
-+ }
-+
-+ return 1;
-+}
-+
-+static int jz4740_handle_get_status(struct jz4740_udc *dev,
-+ struct usb_ctrlrequest *ctrl)
-+{
-+ struct jz4740_ep *ep0 = &dev->ep[0];
-+ struct jz4740_ep *qep;
-+ int reqtype = (ctrl->bRequestType & USB_RECIP_MASK);
-+ uint16_t val = 0;
-+
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+
-+ if (reqtype == USB_RECIP_INTERFACE) {
-+ /* This is not supported.
-+ * And according to the USB spec, this one does nothing..
-+ * Just return 0
-+ */
-+ DEBUG_SETUP("GET_STATUS: USB_RECIP_INTERFACE\n");
-+ } else if (reqtype == USB_RECIP_DEVICE) {
-+ DEBUG_SETUP("GET_STATUS: USB_RECIP_DEVICE\n");
-+ val |= (1 << 0); /* Self powered */
-+ /*val |= (1<<1); *//* Remote wakeup */
-+ } else if (reqtype == USB_RECIP_ENDPOINT) {
-+ int ep_num = (ctrl->wIndex & ~USB_DIR_IN);
-+
-+ DEBUG_SETUP
-+ ("GET_STATUS: USB_RECIP_ENDPOINT (%d), ctrl->wLength = %d\n",
-+ ep_num, ctrl->wLength);
-+
-+ if (ctrl->wLength > 2 || ep_num > 3)
-+ return -EOPNOTSUPP;
-+
-+ qep = &dev->ep[ep_num];
-+ if (ep_is_in(qep) != ((ctrl->wIndex & USB_DIR_IN) ? 1 : 0)
-+ && ep_index(qep) != 0) {
-+ return -EOPNOTSUPP;
-+ }
-+
-+ jz_udc_select_ep(qep);
-+
-+ /* Return status on next IN token */
-+ switch (qep->type) {
-+ case ep_control:
-+ val =
-+ (usb_readb(dev, qep->csr) & USB_CSR0_SENDSTALL) ==
-+ USB_CSR0_SENDSTALL;
-+ break;
-+ case ep_bulk_in:
-+ case ep_interrupt:
-+ val =
-+ (usb_readb(dev, qep->csr) & USB_INCSR_SENDSTALL) ==
-+ USB_INCSR_SENDSTALL;
-+ break;
-+ case ep_bulk_out:
-+ val =
-+ (usb_readb(dev, qep->csr) & USB_OUTCSR_SENDSTALL) ==
-+ USB_OUTCSR_SENDSTALL;
-+ break;
-+ }
-+
-+ /* Back to EP0 index */
-+ jz_udc_set_index(dev, 0);
-+
-+ DEBUG_SETUP("GET_STATUS, ep: %d (%x), val = %d\n", ep_num,
-+ ctrl->wIndex, val);
-+ } else {
-+ DEBUG_SETUP("Unknown REQ TYPE: %d\n", reqtype);
-+ return -EOPNOTSUPP;
-+ }
-+
-+ /* Clear "out packet ready" */
-+ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SVDOUTPKTRDY);
-+ /* Put status to FIFO */
-+ jz4740_fifo_write(ep0, (uint8_t *)&val, sizeof(val));
-+ /* Issue "In packet ready" */
-+ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_INPKTRDY | USB_CSR0_DATAEND));
-+
-+ return 0;
-+}
-+
-+/*
-+ * WAIT_FOR_SETUP (OUTPKTRDY)
-+ * - read data packet from EP0 FIFO
-+ * - decode command
-+ * - if error
-+ * set USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND | USB_CSR0_SENDSTALL bits
-+ * - else
-+ * set USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND bits
-+ */
-+static void jz4740_ep0_setup(struct jz4740_udc *dev, uint32_t csr)
-+{
-+ struct jz4740_ep *ep = &dev->ep[0];
-+ struct usb_ctrlrequest ctrl;
-+ int i;
-+
-+ DEBUG_SETUP("%s: %x\n", __FUNCTION__, csr);
-+
-+ /* Nuke all previous transfers */
-+ nuke(ep, -EPROTO);
-+
-+ /* read control req from fifo (8 bytes) */
-+ jz4740_fifo_read(ep, (unsigned char *)&ctrl, 8);
-+
-+ DEBUG_SETUP("SETUP %02x.%02x v%04x i%04x l%04x\n",
-+ ctrl.bRequestType, ctrl.bRequest,
-+ ctrl.wValue, ctrl.wIndex, ctrl.wLength);
-+
-+ /* Set direction of EP0 */
-+ if (likely(ctrl.bRequestType & USB_DIR_IN)) {
-+ ep->bEndpointAddress |= USB_DIR_IN;
-+ } else {
-+ ep->bEndpointAddress &= ~USB_DIR_IN;
-+ }
-+
-+ /* Handle some SETUP packets ourselves */
-+ switch (ctrl.bRequest) {
-+ case USB_REQ_SET_ADDRESS:
-+ if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE))
-+ break;
-+
-+ DEBUG_SETUP("USB_REQ_SET_ADDRESS (%d)\n", ctrl.wValue);
-+ udc_set_address(dev, ctrl.wValue);
-+ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));
-+ return;
-+
-+ case USB_REQ_SET_CONFIGURATION:
-+ if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE))
-+ break;
-+
-+ DEBUG_SETUP("USB_REQ_SET_CONFIGURATION (%d)\n", ctrl.wValue);
-+/* usb_setb(JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));*/
-+
-+ /* Enable RESUME and SUSPEND interrupts */
-+ usb_setb(dev, JZ_REG_UDC_INTRUSBE, (USB_INTR_RESUME | USB_INTR_SUSPEND));
-+ break;
-+
-+ case USB_REQ_SET_INTERFACE:
-+ if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE))
-+ break;
-+
-+ DEBUG_SETUP("USB_REQ_SET_INTERFACE (%d)\n", ctrl.wValue);
-+/* usb_setb(JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));*/
-+ break;
-+
-+ case USB_REQ_GET_STATUS:
-+ if (jz4740_handle_get_status(dev, &ctrl) == 0)
-+ return;
-+
-+ case USB_REQ_CLEAR_FEATURE:
-+ case USB_REQ_SET_FEATURE:
-+ if (ctrl.bRequestType == USB_RECIP_ENDPOINT) {
-+ struct jz4740_ep *qep;
-+ int ep_num = (ctrl.wIndex & 0x0f);
-+
-+ /* Support only HALT feature */
-+ if (ctrl.wValue != 0 || ctrl.wLength != 0
-+ || ep_num > 3 || ep_num < 1)
-+ break;
-+
-+ qep = &dev->ep[ep_num];
-+ spin_unlock(&dev->lock);
-+ if (ctrl.bRequest == USB_REQ_SET_FEATURE) {
-+ DEBUG_SETUP("SET_FEATURE (%d)\n",
-+ ep_num);
-+ jz4740_set_halt(&qep->ep, 1);
-+ } else {
-+ DEBUG_SETUP("CLR_FEATURE (%d)\n",
-+ ep_num);
-+ jz4740_set_halt(&qep->ep, 0);
-+ }
-+ spin_lock(&dev->lock);
-+
-+ jz_udc_set_index(dev, 0);
-+
-+ /* Reply with a ZLP on next IN token */
-+ usb_setb(dev, JZ_REG_UDC_CSR0,
-+ (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND));
-+ return;
-+ }
-+ break;
-+
-+ default:
-+ break;
-+ }
-+
-+ /* gadget drivers see class/vendor specific requests,
-+ * {SET,GET}_{INTERFACE,DESCRIPTOR,CONFIGURATION},
-+ * and more.
-+ */
-+ if (dev->driver) {
-+ /* device-2-host (IN) or no data setup command, process immediately */
-+ spin_unlock(&dev->lock);
-+
-+ i = dev->driver->setup(&dev->gadget, &ctrl);
-+ spin_lock(&dev->lock);
-+
-+ if (unlikely(i < 0)) {
-+ /* setup processing failed, force stall */
-+ DEBUG_SETUP
-+ (" --> ERROR: gadget setup FAILED (stalling), setup returned %d\n",
-+ i);
-+ jz_udc_set_index(dev, 0);
-+ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_SVDOUTPKTRDY | USB_CSR0_DATAEND | USB_CSR0_SENDSTALL));
-+
-+ /* ep->stopped = 1; */
-+ dev->ep0state = WAIT_FOR_SETUP;
-+ }
-+ else {
-+ DEBUG_SETUP("gadget driver setup ok (%d)\n", ctrl.wLength);
-+/* if (!ctrl.wLength) {
-+ usb_setb(JZ_REG_UDC_CSR0, USB_CSR0_SVDOUTPKTRDY);
-+ }*/
-+ }
-+ }
-+}
-+
-+/*
-+ * DATA_STATE_NEED_ZLP
-+ */
-+static void jz4740_ep0_in_zlp(struct jz4740_udc *dev, uint32_t csr)
-+{
-+ DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
-+
-+ usb_setb(dev, JZ_REG_UDC_CSR0, (USB_CSR0_INPKTRDY | USB_CSR0_DATAEND));
-+ dev->ep0state = WAIT_FOR_SETUP;
-+}
-+
-+/*
-+ * handle ep0 interrupt
-+ */
-+static void jz4740_handle_ep0(struct jz4740_udc *dev, uint32_t intr)
-+{
-+ struct jz4740_ep *ep = &dev->ep[0];
-+ uint32_t csr;
-+
-+ DEBUG("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+ /* Set index 0 */
-+ jz_udc_set_index(dev, 0);
-+ csr = usb_readb(dev, JZ_REG_UDC_CSR0);
-+
-+ DEBUG_EP0("%s: csr = %x state = \n", __FUNCTION__, csr);//, state_names[dev->ep0state]);
-+
-+ /*
-+ * if SENT_STALL is set
-+ * - clear the SENT_STALL bit
-+ */
-+ if (csr & USB_CSR0_SENTSTALL) {
-+ DEBUG_EP0("%s: USB_CSR0_SENTSTALL is set: %x\n", __FUNCTION__, csr);
-+ usb_clearb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SENDSTALL | USB_CSR0_SENTSTALL);
-+ nuke(ep, -ECONNABORTED);
-+ dev->ep0state = WAIT_FOR_SETUP;
-+ return;
-+ }
-+
-+ /*
-+ * if a transfer is in progress && INPKTRDY and OUTPKTRDY are clear
-+ * - fill EP0 FIFO
-+ * - if last packet
-+ * - set IN_PKT_RDY | DATA_END
-+ * - else
-+ * set IN_PKT_RDY
-+ */
-+ if (!(csr & (USB_CSR0_INPKTRDY | USB_CSR0_OUTPKTRDY))) {
-+ DEBUG_EP0("%s: INPKTRDY and OUTPKTRDY are clear\n",
-+ __FUNCTION__);
-+
-+ switch (dev->ep0state) {
-+ case DATA_STATE_XMIT:
-+ DEBUG_EP0("continue with DATA_STATE_XMIT\n");
-+ jz4740_ep0_in(dev, csr);
-+ return;
-+ case DATA_STATE_NEED_ZLP:
-+ DEBUG_EP0("continue with DATA_STATE_NEED_ZLP\n");
-+ jz4740_ep0_in_zlp(dev, csr);
-+ return;
-+ default:
-+ /* Stall? */
-+// DEBUG_EP0("Odd state!! state = %s\n",
-+// state_names[dev->ep0state]);
-+ dev->ep0state = WAIT_FOR_SETUP;
-+ /* nuke(ep, 0); */
-+ /* usb_setb(ep->csr, USB_CSR0_SENDSTALL); */
-+// break;
-+ return;
-+ }
-+ }
-+
-+ /*
-+ * if SETUPEND is set
-+ * - abort the last transfer
-+ * - set SERVICED_SETUP_END_BIT
-+ */
-+ if (csr & USB_CSR0_SETUPEND) {
-+ DEBUG_EP0("%s: USB_CSR0_SETUPEND is set: %x\n", __FUNCTION__, csr);
-+
-+ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SVDSETUPEND);
-+ nuke(ep, 0);
-+ dev->ep0state = WAIT_FOR_SETUP;
-+ }
-+
-+ /*
-+ * if USB_CSR0_OUTPKTRDY is set
-+ * - read data packet from EP0 FIFO
-+ * - decode command
-+ * - if error
-+ * set SVDOUTPKTRDY | DATAEND | SENDSTALL bits
-+ * - else
-+ * set SVDOUTPKTRDY | DATAEND bits
-+ */
-+ if (csr & USB_CSR0_OUTPKTRDY) {
-+
-+ DEBUG_EP0("%s: EP0_OUT_PKT_RDY is set: %x\n", __FUNCTION__,
-+ csr);
-+
-+ switch (dev->ep0state) {
-+ case WAIT_FOR_SETUP:
-+ DEBUG_EP0("WAIT_FOR_SETUP\n");
-+ jz4740_ep0_setup(dev, csr);
-+ break;
-+
-+ case DATA_STATE_RECV:
-+ DEBUG_EP0("DATA_STATE_RECV\n");
-+ jz4740_ep0_out(dev, csr, 0);
-+ break;
-+
-+ default:
-+ /* send stall? */
-+ DEBUG_EP0("strange state!! 2. send stall? state = %d\n",
-+ dev->ep0state);
-+ break;
-+ }
-+ }
-+}
-+
-+static void jz4740_ep0_kick(struct jz4740_udc *dev, struct jz4740_ep *ep)
-+{
-+ uint32_t csr;
-+
-+ jz_udc_set_index(dev, 0);
-+
-+ DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
-+
-+ /* Clear "out packet ready" */
-+
-+ if (ep_is_in(ep)) {
-+ usb_setb(dev, JZ_REG_UDC_CSR0, USB_CSR0_SVDOUTPKTRDY);
-+ csr = usb_readb(dev, JZ_REG_UDC_CSR0);
-+ dev->ep0state = DATA_STATE_XMIT;
-+ jz4740_ep0_in(dev, csr);
-+ } else {
-+ csr = usb_readb(dev, JZ_REG_UDC_CSR0);
-+ dev->ep0state = DATA_STATE_RECV;
-+ jz4740_ep0_out(dev, csr, 1);
-+ }
-+}
-+
-+/** Handle USB RESET interrupt
-+ */
-+static void jz4740_reset_irq(struct jz4740_udc *dev)
-+{
-+ dev->gadget.speed = (usb_readb(dev, JZ_REG_UDC_POWER) & USB_POWER_HSMODE) ?
-+ USB_SPEED_HIGH : USB_SPEED_FULL;
-+
-+ DEBUG_SETUP("%s: address = %d, speed = %s\n", __FUNCTION__, 0,
-+ (dev->gadget.speed == USB_SPEED_HIGH) ? "HIGH":"FULL" );
-+}
-+
-+/*
-+ * jz4740 usb device interrupt handler.
-+ */
-+static irqreturn_t jz4740_udc_irq(int irq, void *devid)
-+{
-+ struct jz4740_udc *jz4740_udc = devid;
-+ uint8_t index;
-+
-+ uint32_t intr_usb = usb_readb(jz4740_udc, JZ_REG_UDC_INTRUSB) & 0x7; /* mask SOF */
-+ uint32_t intr_in = usb_readw(jz4740_udc, JZ_REG_UDC_INTRIN);
-+ uint32_t intr_out = usb_readw(jz4740_udc, JZ_REG_UDC_INTROUT);
-+ uint32_t intr_dma = usb_readb(jz4740_udc, JZ_REG_UDC_INTR);
-+
-+ if (!intr_usb && !intr_in && !intr_out && !intr_dma)
-+ return IRQ_HANDLED;
-+
-+
-+ DEBUG("intr_out=%x intr_in=%x intr_usb=%x\n",
-+ intr_out, intr_in, intr_usb);
-+
-+ spin_lock(&jz4740_udc->lock);
-+ index = usb_readb(jz4740_udc, JZ_REG_UDC_INDEX);
-+
-+ /* Check for resume from suspend mode */
-+ if ((intr_usb & USB_INTR_RESUME) &&
-+ (usb_readb(jz4740_udc, JZ_REG_UDC_INTRUSBE) & USB_INTR_RESUME)) {
-+ DEBUG("USB resume\n");
-+ jz4740_udc->driver->resume(&jz4740_udc->gadget); /* We have suspend(), so we must have resume() too. */
-+ }
-+
-+ /* Check for system interrupts */
-+ if (intr_usb & USB_INTR_RESET) {
-+ DEBUG("USB reset\n");
-+ jz4740_reset_irq(jz4740_udc);
-+ }
-+
-+ /* Check for endpoint 0 interrupt */
-+ if (intr_in & USB_INTR_EP0) {
-+ DEBUG("USB_INTR_EP0 (control)\n");
-+ jz4740_handle_ep0(jz4740_udc, intr_in);
-+ }
-+
-+ /* Check for Bulk-IN DMA interrupt */
-+ if (intr_dma & 0x1) {
-+ int ep_num;
-+ struct jz4740_ep *ep;
-+ ep_num = (usb_readl(jz4740_udc, JZ_REG_UDC_CNTL1) >> 4) & 0xf;
-+ ep = &jz4740_udc->ep[ep_num + 1];
-+ jz_udc_select_ep(ep);
-+ usb_setb(jz4740_udc, ep->csr, USB_INCSR_INPKTRDY);
-+/* jz4740_in_epn(jz4740_udc, ep_num, intr_in);*/
-+ }
-+
-+ /* Check for Bulk-OUT DMA interrupt */
-+ if (intr_dma & 0x2) {
-+ int ep_num;
-+ ep_num = (usb_readl(jz4740_udc, JZ_REG_UDC_CNTL2) >> 4) & 0xf;
-+ jz4740_out_epn(jz4740_udc, ep_num, intr_out);
-+ }
-+
-+ /* Check for each configured endpoint interrupt */
-+ if (intr_in & USB_INTR_INEP1) {
-+ DEBUG("USB_INTR_INEP1\n");
-+ jz4740_in_epn(jz4740_udc, 1, intr_in);
-+ }
-+
-+ if (intr_in & USB_INTR_INEP2) {
-+ DEBUG("USB_INTR_INEP2\n");
-+ jz4740_in_epn(jz4740_udc, 2, intr_in);
-+ }
-+
-+ if (intr_out & USB_INTR_OUTEP1) {
-+ DEBUG("USB_INTR_OUTEP1\n");
-+ jz4740_out_epn(jz4740_udc, 1, intr_out);
-+ }
-+
-+ /* Check for suspend mode */
-+ if ((intr_usb & USB_INTR_SUSPEND) &&
-+ (usb_readb(jz4740_udc, JZ_REG_UDC_INTRUSBE) & USB_INTR_SUSPEND)) {
-+ DEBUG("USB suspend\n");
-+ jz4740_udc->driver->suspend(&jz4740_udc->gadget);
-+ /* Host unloaded from us, can do something, such as flushing
-+ the NAND block cache etc. */
-+ }
-+
-+ jz_udc_set_index(jz4740_udc, index);
-+
-+ spin_unlock(&jz4740_udc->lock);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+
-+static inline struct jz4740_udc *gadget_to_udc(struct usb_gadget *gadget)
-+{
-+ return container_of(gadget, struct jz4740_udc, gadget);
-+}
-+
-+static int jz4740_udc_get_frame(struct usb_gadget *_gadget)
-+{
-+ DEBUG("%s, %p\n", __FUNCTION__, _gadget);
-+ return usb_readw(gadget_to_udc(_gadget), JZ_REG_UDC_FRAME);
-+}
-+
-+static int jz4740_udc_wakeup(struct usb_gadget *_gadget)
-+{
-+ /* host may not have enabled remote wakeup */
-+ /*if ((UDCCS0 & UDCCS0_DRWF) == 0)
-+ return -EHOSTUNREACH;
-+ udc_set_mask_UDCCR(UDCCR_RSM); */
-+ return -ENOTSUPP;
-+}
-+
-+static int jz4740_udc_pullup(struct usb_gadget *_gadget, int on)
-+{
-+ struct jz4740_udc *udc = gadget_to_udc(_gadget);
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+
-+ if (on) {
-+ udc->state = UDC_STATE_ENABLE;
-+ udc_enable(udc);
-+ } else {
-+ udc->state = UDC_STATE_DISABLE;
-+ udc_disable(udc);
-+ }
-+
-+ local_irq_restore(flags);
-+
-+ return 0;
-+}
-+
-+
-+static const struct usb_gadget_ops jz4740_udc_ops = {
-+ .get_frame = jz4740_udc_get_frame,
-+ .wakeup = jz4740_udc_wakeup,
-+ .pullup = jz4740_udc_pullup,
-+ .start = jz4740_udc_start,
-+ .stop = jz4740_udc_stop,
-+};
-+
-+static struct usb_ep_ops jz4740_ep_ops = {
-+ .enable = jz4740_ep_enable,
-+ .disable = jz4740_ep_disable,
-+
-+ .alloc_request = jz4740_alloc_request,
-+ .free_request = jz4740_free_request,
-+
-+ .queue = jz4740_queue,
-+ .dequeue = jz4740_dequeue,
-+
-+ .set_halt = jz4740_set_halt,
-+ .fifo_status = jz4740_fifo_status,
-+ .fifo_flush = jz4740_fifo_flush,
-+};
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static struct jz4740_udc jz4740_udc_controller = {
-+ .gadget = {
-+ .ops = &jz4740_udc_ops,
-+ .ep0 = &jz4740_udc_controller.ep[0].ep,
-+ .name = "jz4740-udc",
-+ .dev = {
-+ .init_name = "gadget",
-+ },
-+ },
-+
-+ /* control endpoint */
-+ .ep[0] = {
-+ .ep = {
-+ .name = "ep0",
-+ .ops = &jz4740_ep_ops,
-+ .maxpacket = EP0_MAXPACKETSIZE,
-+ },
-+ .dev = &jz4740_udc_controller,
-+
-+ .bEndpointAddress = 0,
-+ .bmAttributes = 0,
-+
-+ .type = ep_control,
-+ .fifo = JZ_REG_UDC_EP_FIFO(0),
-+ .csr = JZ_REG_UDC_CSR0,
-+ },
-+
-+ /* bulk out endpoint */
-+ .ep[1] = {
-+ .ep = {
-+ .name = "ep1out-bulk",
-+ .ops = &jz4740_ep_ops,
-+ .maxpacket = EPBULK_MAXPACKETSIZE,
-+ },
-+ .dev = &jz4740_udc_controller,
-+
-+ .bEndpointAddress = 1,
-+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
-+
-+ .type = ep_bulk_out,
-+ .fifo = JZ_REG_UDC_EP_FIFO(1),
-+ .csr = JZ_REG_UDC_OUTCSR,
-+ },
-+
-+ /* bulk in endpoint */
-+ .ep[2] = {
-+ .ep = {
-+ .name = "ep1in-bulk",
-+ .ops = &jz4740_ep_ops,
-+ .maxpacket = EPBULK_MAXPACKETSIZE,
-+ },
-+ .dev = &jz4740_udc_controller,
-+
-+ .bEndpointAddress = 1 | USB_DIR_IN,
-+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
-+
-+ .type = ep_bulk_in,
-+ .fifo = JZ_REG_UDC_EP_FIFO(1),
-+ .csr = JZ_REG_UDC_INCSR,
-+ },
-+
-+ /* interrupt in endpoint */
-+ .ep[3] = {
-+ .ep = {
-+ .name = "ep2in-int",
-+ .ops = &jz4740_ep_ops,
-+ .maxpacket = EPINTR_MAXPACKETSIZE,
-+ },
-+ .dev = &jz4740_udc_controller,
-+
-+ .bEndpointAddress = 2 | USB_DIR_IN,
-+ .bmAttributes = USB_ENDPOINT_XFER_INT,
-+
-+ .type = ep_interrupt,
-+ .fifo = JZ_REG_UDC_EP_FIFO(2),
-+ .csr = JZ_REG_UDC_INCSR,
-+ },
-+};
-+
-+static int __devinit jz4740_udc_probe(struct platform_device *pdev)
-+{
-+ struct jz4740_udc *jz4740_udc = &jz4740_udc_controller;
-+ int ret;
-+
-+ spin_lock_init(&jz4740_udc->lock);
-+
-+ jz4740_udc->dev = &pdev->dev;
-+ jz4740_udc->gadget.dev.parent = &pdev->dev;
-+ jz4740_udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
-+
-+ ret = device_register(&jz4740_udc->gadget.dev);
-+ if (ret)
-+ return ret;
-+
-+ jz4740_udc->clk = clk_get(&pdev->dev, "udc");
-+ if (IS_ERR(jz4740_udc->clk)) {
-+ ret = PTR_ERR(jz4740_udc->clk);
-+ dev_err(&pdev->dev, "Failed to get udc clock: %d\n", ret);
-+ goto err_device_unregister;
-+ }
-+
-+ platform_set_drvdata(pdev, jz4740_udc);
-+
-+ jz4740_udc->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+
-+ if (!jz4740_udc->mem) {
-+ ret = -ENOENT;
-+ dev_err(&pdev->dev, "Failed to get mmio memory resource\n");
-+ goto err_clk_put;
-+ }
-+
-+ jz4740_udc->mem = request_mem_region(jz4740_udc->mem->start,
-+ resource_size(jz4740_udc->mem), pdev->name);
-+
-+ if (!jz4740_udc->mem) {
-+ ret = -EBUSY;
-+ dev_err(&pdev->dev, "Failed to request mmio memory region\n");
-+ goto err_device_unregister;
-+ }
-+
-+ jz4740_udc->base = ioremap(jz4740_udc->mem->start, resource_size(jz4740_udc->mem));
-+
-+ if (!jz4740_udc->base) {
-+ ret = -EBUSY;
-+ dev_err(&pdev->dev, "Failed to ioremap mmio memory\n");
-+ goto err_release_mem_region;
-+ }
-+
-+ jz4740_udc->irq = platform_get_irq(pdev, 0);
-+ ret = request_irq(jz4740_udc->irq, jz4740_udc_irq, 0, pdev->name,
-+ jz4740_udc);
-+ if (ret) {
-+ dev_err(&pdev->dev, "Failed to request irq: %d\n", ret);
-+ goto err_iounmap;
-+ }
-+
-+ ret = usb_add_gadget_udc(&pdev->dev, &jz4740_udc->gadget);
-+ if (ret) {
-+ dev_err(&pdev->dev, "Failed to add gadget: %d\n", ret);
-+ goto err_free_irq;
-+ }
-+
-+ udc_disable(jz4740_udc);
-+ udc_reinit(jz4740_udc);
-+
-+ return 0;
-+
-+err_free_irq:
-+ free_irq(jz4740_udc->irq, pdev);
-+err_iounmap:
-+ iounmap(jz4740_udc->base);
-+err_release_mem_region:
-+ release_mem_region(jz4740_udc->mem->start, resource_size(jz4740_udc->mem));
-+err_clk_put:
-+ clk_put(jz4740_udc->clk);
-+err_device_unregister:
-+ device_unregister(&jz4740_udc->gadget.dev);
-+ platform_set_drvdata(pdev, NULL);
-+
-+ return ret;
-+}
-+
-+static int __devexit jz4740_udc_remove(struct platform_device *pdev)
-+{
-+ struct jz4740_udc *dev = platform_get_drvdata(pdev);
-+
-+ usb_del_gadget_udc(&dev->gadget);
-+ if (dev->driver)
-+ return -EBUSY;
-+
-+ udc_disable(dev);
-+
-+ free_irq(dev->irq, dev);
-+ iounmap(dev->base);
-+ release_mem_region(dev->mem->start, resource_size(dev->mem));
-+ clk_put(dev->clk);
-+
-+ platform_set_drvdata(pdev, NULL);
-+ device_unregister(&dev->gadget.dev);
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int jz4740_udc_suspend(struct device *dev)
-+{
-+ struct jz4740_udc *jz4740_udc = dev_get_drvdata(dev);
-+
-+ if (jz4740_udc->state == UDC_STATE_ENABLE)
-+ udc_disable(jz4740_udc);
-+
-+ return 0;
-+}
-+
-+static int jz4740_udc_resume(struct device *dev)
-+{
-+ struct jz4740_udc *jz4740_udc = dev_get_drvdata(dev);
-+
-+ if (jz4740_udc->state == UDC_STATE_ENABLE)
-+ udc_enable(jz4740_udc);
-+
-+ return 0;
-+}
-+
-+static SIMPLE_DEV_PM_OPS(jz4740_udc_pm_ops, jz4740_udc_suspend, jz4740_udc_resume);
-+#define JZ4740_UDC_PM_OPS (&jz4740_udc_pm_ops)
-+
-+#else
-+#define JZ4740_UDC_PM_OPS NULL
-+#endif
-+
-+static struct platform_driver udc_driver = {
-+ .probe = jz4740_udc_probe,
-+ .remove = __devexit_p(jz4740_udc_remove),
-+ .driver = {
-+ .name = "jz-udc",
-+ .owner = THIS_MODULE,
-+ .pm = JZ4740_UDC_PM_OPS,
-+ },
-+};
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static int __init udc_init (void)
-+{
-+ return platform_driver_register(&udc_driver);
-+}
-+module_init(udc_init);
-+
-+static void __exit udc_exit (void)
-+{
-+ platform_driver_unregister(&udc_driver);
-+}
-+module_exit(udc_exit);
-+
-+MODULE_DESCRIPTION("JZ4740 USB Device Controller");
-+MODULE_AUTHOR("Wei Jianli <jlwei@ingenic.cn>");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/usb/gadget/jz4740_udc.h
-@@ -0,0 +1,101 @@
-+/*
-+ * linux/drivers/usb/gadget/jz4740_udc.h
-+ *
-+ * Ingenic JZ4740 on-chip high speed USB device controller
-+ *
-+ * Copyright (C) 2006 Ingenic Semiconductor Inc.
-+ * Author: <jlwei@ingenic.cn>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef __USB_GADGET_JZ4740_H__
-+#define __USB_GADGET_JZ4740_H__
-+
-+/*-------------------------------------------------------------------------*/
-+
-+// Max packet size
-+#define EP0_MAXPACKETSIZE 64
-+#define EPBULK_MAXPACKETSIZE 512
-+#define EPINTR_MAXPACKETSIZE 64
-+
-+#define UDC_MAX_ENDPOINTS 4
-+
-+/*-------------------------------------------------------------------------*/
-+
-+enum ep_type {
-+ ep_control, ep_bulk_in, ep_bulk_out, ep_interrupt
-+};
-+
-+struct jz4740_ep {
-+ struct usb_ep ep;
-+ struct jz4740_udc *dev;
-+
-+ const struct usb_endpoint_descriptor *desc;
-+
-+ uint8_t stopped;
-+ uint8_t bEndpointAddress;
-+ uint8_t bmAttributes;
-+
-+ enum ep_type type;
-+ size_t fifo;
-+ uint32_t csr;
-+
-+ uint32_t reg_addr;
-+ struct list_head queue;
-+};
-+
-+struct jz4740_request {
-+ struct usb_request req;
-+ struct list_head queue;
-+};
-+
-+enum ep0state {
-+ WAIT_FOR_SETUP, /* between STATUS ack and SETUP report */
-+ DATA_STATE_XMIT, /* data tx stage */
-+ DATA_STATE_NEED_ZLP, /* data tx zlp stage */
-+ WAIT_FOR_OUT_STATUS, /* status stages */
-+ DATA_STATE_RECV, /* data rx stage */
-+};
-+
-+/* For function binding with UDC Disable - Added by River */
-+typedef enum {
-+ UDC_STATE_ENABLE = 0,
-+ UDC_STATE_DISABLE,
-+}udc_state_t;
-+
-+struct jz4740_udc {
-+ struct usb_gadget gadget;
-+ struct usb_gadget_driver *driver;
-+ struct device *dev;
-+ spinlock_t lock;
-+ unsigned long lock_flags;
-+
-+ enum ep0state ep0state;
-+ struct jz4740_ep ep[UDC_MAX_ENDPOINTS];
-+
-+ udc_state_t state;
-+
-+ struct resource *mem;
-+ void __iomem *base;
-+ int irq;
-+
-+ struct clk *clk;
-+};
-+
-+#define ep_maxpacket(EP) ((EP)->ep.maxpacket)
-+
-+static inline bool ep_is_in(const struct jz4740_ep *ep)
-+{
-+ return (ep->bEndpointAddress & USB_DIR_IN) == USB_DIR_IN;
-+}
-+
-+static inline uint8_t ep_index(const struct jz4740_ep *ep)
-+{
-+ return ep->bEndpointAddress & 0xf;
-+}
-+
-+#endif /* __USB_GADGET_JZ4740_H__ */
diff --git a/target/linux/xburst/patches-3.3/0003-NAND-Optimize-NAND_ECC_HW_OOB_FIRST-read.patch b/target/linux/xburst/patches-3.3/0003-NAND-Optimize-NAND_ECC_HW_OOB_FIRST-read.patch
deleted file mode 100644
index 9583ab76c5..0000000000
--- a/target/linux/xburst/patches-3.3/0003-NAND-Optimize-NAND_ECC_HW_OOB_FIRST-read.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From b971c50dc50c07f981a1619f977e7509db9c4eac Mon Sep 17 00:00:00 2001
-From: Lars-Peter Clausen <lars@metafoo.de>
-Date: Sat, 26 Feb 2011 15:30:07 +0100
-Subject: [PATCH 03/21] NAND: Optimize NAND_ECC_HW_OOB_FIRST read
-
-Avoid sending unnecessary READ commands to the chip.
----
- drivers/mtd/nand/nand_base.c | 14 ++++++++++----
- 1 files changed, 10 insertions(+), 4 deletions(-)
-
---- a/drivers/mtd/nand/nand_base.c
-+++ b/drivers/mtd/nand/nand_base.c
-@@ -1294,9 +1294,15 @@ static int nand_read_page_hwecc_oob_firs
- uint8_t *ecc_calc = chip->buffers->ecccalc;
-
- /* Read the OOB area first */
-- chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
-- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-- chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
-+ if (mtd->writesize > 512) {
-+ chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
-+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, 0, -1);
-+ } else {
-+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
-+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
-+ }
-
- for (i = 0; i < chip->ecc.total; i++)
- ecc_code[i] = chip->oob_poi[eccpos[i]];
-@@ -1465,7 +1471,7 @@ static int nand_do_read_ops(struct mtd_i
- if (realpage != chip->pagebuf || oob) {
- bufpoi = aligned ? buf : chip->buffers->databuf;
-
-- if (likely(sndcmd)) {
-+ if (likely(sndcmd) && chip->ecc.mode != NAND_ECC_HW_OOB_FIRST) {
- chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
- sndcmd = 0;
- }
diff --git a/target/linux/xburst/patches-3.3/0004-NAND-Add-support-for-subpage-reads-for-NAND_ECC_HW_O.patch b/target/linux/xburst/patches-3.3/0004-NAND-Add-support-for-subpage-reads-for-NAND_ECC_HW_O.patch
deleted file mode 100644
index 477d3723e1..0000000000
--- a/target/linux/xburst/patches-3.3/0004-NAND-Add-support-for-subpage-reads-for-NAND_ECC_HW_O.patch
+++ /dev/null
@@ -1,144 +0,0 @@
-From 297d8a7bdfb755778d4189ca2861dd2a6125e972 Mon Sep 17 00:00:00 2001
-From: Lars-Peter Clausen <lars@metafoo.de>
-Date: Tue, 15 Mar 2011 12:33:41 +0100
-Subject: [PATCH 04/21] NAND: Add support for subpage reads for
- NAND_ECC_HW_OOB_FIRST
-
----
- drivers/mtd/nand/nand_base.c | 78 ++++++++++++++++++++++++++++++++++++++++--
- include/linux/mtd/nand.h | 8 ++--
- 2 files changed, 79 insertions(+), 7 deletions(-)
-
---- a/drivers/mtd/nand/nand_base.c
-+++ b/drivers/mtd/nand/nand_base.c
-@@ -1143,7 +1143,7 @@ static int nand_read_page_swecc(struct m
- * @bufpoi: buffer to store read data
- */
- static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
-- uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
-+ uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi, int page)
- {
- int start_step, end_step, num_steps;
- uint32_t *eccpos = chip->ecc.layout->eccpos;
-@@ -1324,6 +1324,75 @@ static int nand_read_page_hwecc_oob_firs
- }
-
- /**
-+ * nand_read_subpage_hwecc_oob_first - [REPLACABLE] hw ecc based sub-page read function
-+ * @mtd: mtd info structure
-+ * @chip: nand chip info structure
-+ * @data_offs: offset of requested data within the page
-+ * @readlen: data length
-+ * @bufpoi: buffer to store read data
-+ * @page: page number to read
-+ *
-+ * Hardware ECC for large page chips, require OOB to be read first.
-+ * For this ECC mode, the write_page method is re-used from ECC_HW.
-+ * These methods read/write ECC from the OOB area, unlike the
-+ * ECC_HW_SYNDROME support with multiple ECC steps, follows the
-+ * "infix ECC" scheme and reads/writes ECC from the data area, by
-+ * overwriting the NAND manufacturer bad block markings.
-+ */
-+static int nand_read_subpage_hwecc_oob_first(struct mtd_info *mtd, struct nand_chip *chip,
-+ uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi, int page)
-+{
-+ int start_step, end_step, num_steps;
-+ uint32_t *eccpos = chip->ecc.layout->eccpos;
-+ uint8_t *p;
-+ int data_col_addr;
-+ int eccsize = chip->ecc.size;
-+ int eccbytes = chip->ecc.bytes;
-+ uint8_t *ecc_code = chip->buffers->ecccode;
-+ uint8_t *ecc_calc = chip->buffers->ecccalc;
-+ int i;
-+
-+ /* Column address wihin the page aligned to ECC size */
-+ start_step = data_offs / chip->ecc.size;
-+ end_step = (data_offs + readlen - 1) / chip->ecc.size;
-+ num_steps = end_step - start_step + 1;
-+
-+ data_col_addr = start_step * chip->ecc.size;
-+
-+ /* Read the OOB area first */
-+ if (mtd->writesize > 512) {
-+ chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
-+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_col_addr, -1);
-+ } else {
-+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
-+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-+ chip->cmdfunc(mtd, NAND_CMD_READ0, data_col_addr, page);
-+ }
-+
-+ for (i = 0; i < chip->ecc.total; i++)
-+ ecc_code[i] = chip->oob_poi[eccpos[i]];
-+
-+ p = bufpoi + data_col_addr;
-+
-+ for (i = eccbytes * start_step; num_steps; num_steps--, i += eccbytes, p += eccsize) {
-+ int stat;
-+
-+ chip->ecc.hwctl(mtd, NAND_ECC_READ);
-+ chip->read_buf(mtd, p, eccsize);
-+ chip->ecc.calculate(mtd, p, &ecc_calc[i]);
-+
-+ stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL);
-+ if (stat < 0)
-+ mtd->ecc_stats.failed++;
-+ else
-+ mtd->ecc_stats.corrected += stat;
-+ }
-+
-+ return 0;
-+}
-+
-+/**
- * nand_read_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page read
- * @mtd: mtd info structure
- * @chip: nand chip info structure
-@@ -1482,7 +1551,7 @@ static int nand_do_read_ops(struct mtd_i
- bufpoi, page);
- else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
- ret = chip->ecc.read_subpage(mtd, chip,
-- col, bytes, bufpoi);
-+ col, bytes, bufpoi, page);
- else
- ret = chip->ecc.read_page(mtd, chip, bufpoi,
- page);
-@@ -3293,8 +3362,11 @@ int nand_scan_tail(struct mtd_info *mtd)
- "hardware ECC not possible\n");
- BUG();
- }
-- if (!chip->ecc.read_page)
-+ if (!chip->ecc.read_page) {
- chip->ecc.read_page = nand_read_page_hwecc_oob_first;
-+ if (!chip->ecc.read_subpage)
-+ chip->ecc.read_subpage = nand_read_subpage_hwecc_oob_first;
-+ }
-
- case NAND_ECC_HW:
- /* Use standard hwecc read page function? */
---- a/include/linux/mtd/nand.h
-+++ b/include/linux/mtd/nand.h
-@@ -211,9 +211,9 @@ typedef enum {
- #define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING))
- #define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG))
- #define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK))
--/* Large page NAND with SOFT_ECC should support subpage reads */
--#define NAND_SUBPAGE_READ(chip) ((chip->ecc.mode == NAND_ECC_SOFT) \
-- && (chip->page_shift > 9))
-+/* Large page NAND with read_subpage set should support subpage reads */
-+#define NAND_SUBPAGE_READ(chip) (((chip)->ecc.read_subpage) \
-+ && ((chip)->page_shift > 9))
-
- /* Mask to zero out the chip options, which come from the id table */
- #define NAND_CHIPOPTIONS_MSK (0x0000ffff & ~NAND_NO_AUTOINCR)
-@@ -367,7 +367,7 @@ struct nand_ecc_ctrl {
- int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int page);
- int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
-- uint32_t offs, uint32_t len, uint8_t *buf);
-+ uint32_t offs, uint32_t len, uint8_t *buf, int page);
- void (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf);
- int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
diff --git a/target/linux/xburst/patches-3.3/0005-NAND-Optimize-reading-the-eec-data-for-the-JZ4740.patch b/target/linux/xburst/patches-3.3/0005-NAND-Optimize-reading-the-eec-data-for-the-JZ4740.patch
deleted file mode 100644
index 38a1395075..0000000000
--- a/target/linux/xburst/patches-3.3/0005-NAND-Optimize-reading-the-eec-data-for-the-JZ4740.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 4f28237a750afd1112b6f1266d36f8b718efe89c Mon Sep 17 00:00:00 2001
-From: Xiangfu Liu <xiangfu@sharism.cc>
-Date: Tue, 6 Mar 2012 11:19:26 +0800
-Subject: [PATCH 05/21] NAND-Optimize-reading-the-eec-data-for-the-JZ4740
-
----
- drivers/mtd/nand/nand_base.c | 14 ++++----------
- 1 files changed, 4 insertions(+), 10 deletions(-)
-
---- a/drivers/mtd/nand/nand_base.c
-+++ b/drivers/mtd/nand/nand_base.c
-@@ -1295,8 +1295,8 @@ static int nand_read_page_hwecc_oob_firs
-
- /* Read the OOB area first */
- if (mtd->writesize > 512) {
-- chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
-- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-+ chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize + eccpos[0], page);
-+ chip->read_buf(mtd, ecc_code, chip->ecc.total);
- chip->cmdfunc(mtd, NAND_CMD_RNDOUT, 0, -1);
- } else {
- chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
-@@ -1304,9 +1304,6 @@ static int nand_read_page_hwecc_oob_firs
- chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
- }
-
-- for (i = 0; i < chip->ecc.total; i++)
-- ecc_code[i] = chip->oob_poi[eccpos[i]];
--
- for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
- int stat;
-
-@@ -1361,8 +1358,8 @@ static int nand_read_subpage_hwecc_oob_f
-
- /* Read the OOB area first */
- if (mtd->writesize > 512) {
-- chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
-- chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-+ chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize + eccpos[0], page);
-+ chip->read_buf(mtd, ecc_code, chip->ecc.total);
- chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_col_addr, -1);
- } else {
- chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
-@@ -1370,9 +1367,6 @@ static int nand_read_subpage_hwecc_oob_f
- chip->cmdfunc(mtd, NAND_CMD_READ0, data_col_addr, page);
- }
-
-- for (i = 0; i < chip->ecc.total; i++)
-- ecc_code[i] = chip->oob_poi[eccpos[i]];
--
- p = bufpoi + data_col_addr;
-
- for (i = eccbytes * start_step; num_steps; num_steps--, i += eccbytes, p += eccsize) {
diff --git a/target/linux/xburst/patches-3.3/0006-MTD-NAND-JZ4740-Multi-bank-support-with-autodetectio.patch b/target/linux/xburst/patches-3.3/0006-MTD-NAND-JZ4740-Multi-bank-support-with-autodetectio.patch
deleted file mode 100644
index 4110147974..0000000000
--- a/target/linux/xburst/patches-3.3/0006-MTD-NAND-JZ4740-Multi-bank-support-with-autodetectio.patch
+++ /dev/null
@@ -1,417 +0,0 @@
-From d5814bdb661d3dac61422f8f69e459be884c9a9d Mon Sep 17 00:00:00 2001
-From: Maarten ter Huurne <maarten@treewalker.org>
-Date: Tue, 2 Aug 2011 10:49:28 +0200
-Subject: [PATCH 06/21] MTD: NAND: JZ4740: Multi-bank support with
- autodetection
-
-The platform data can now specify which external memory banks to probe
-for NAND chips, and in which order. Banks that contain a NAND are used
-and the other banks are freed.
-
-Squashed version of development done in jz-2.6.38 branch.
-Original patch by Lars-Peter Clausen with some bug fixes from me.
-Thanks to Paul Cercueil for the initial autodetection patch.
----
- arch/mips/include/asm/mach-jz4740/jz4740_nand.h | 4 +
- arch/mips/jz4740/platform.c | 20 ++-
- drivers/mtd/nand/jz4740_nand.c | 228 +++++++++++++++++++----
- 3 files changed, 215 insertions(+), 37 deletions(-)
-
---- a/arch/mips/include/asm/mach-jz4740/jz4740_nand.h
-+++ b/arch/mips/include/asm/mach-jz4740/jz4740_nand.h
-@@ -19,6 +19,8 @@
- #include <linux/mtd/nand.h>
- #include <linux/mtd/partitions.h>
-
-+#define JZ_NAND_NUM_BANKS 4
-+
- struct jz_nand_platform_data {
- int num_partitions;
- struct mtd_partition *partitions;
-@@ -27,6 +29,8 @@ struct jz_nand_platform_data {
-
- unsigned int busy_gpio;
-
-+ unsigned char banks[JZ_NAND_NUM_BANKS];
-+
- void (*ident_callback)(struct platform_device *, struct nand_chip *,
- struct mtd_partition **, int *num_partitions);
- };
---- a/arch/mips/jz4740/platform.c
-+++ b/arch/mips/jz4740/platform.c
-@@ -157,11 +157,29 @@ static struct resource jz4740_nand_resou
- .flags = IORESOURCE_MEM,
- },
- {
-- .name = "bank",
-+ .name = "bank1",
- .start = 0x18000000,
- .end = 0x180C0000 - 1,
- .flags = IORESOURCE_MEM,
- },
-+ {
-+ .name = "bank2",
-+ .start = 0x14000000,
-+ .end = 0x140C0000 - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "bank3",
-+ .start = 0x0C000000,
-+ .end = 0x0C0C0000 - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "bank4",
-+ .start = 0x08000000,
-+ .end = 0x080C0000 - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
- };
-
- struct platform_device jz4740_nand_device = {
---- a/drivers/mtd/nand/jz4740_nand.c
-+++ b/drivers/mtd/nand/jz4740_nand.c
-@@ -52,9 +52,10 @@
-
- #define JZ_NAND_CTRL_ENABLE_CHIP(x) BIT((x) << 1)
- #define JZ_NAND_CTRL_ASSERT_CHIP(x) BIT(((x) << 1) + 1)
-+#define JZ_NAND_CTRL_ASSERT_CHIP_MASK 0xaa
-
--#define JZ_NAND_MEM_ADDR_OFFSET 0x10000
- #define JZ_NAND_MEM_CMD_OFFSET 0x08000
-+#define JZ_NAND_MEM_ADDR_OFFSET 0x10000
-
- struct jz_nand {
- struct mtd_info mtd;
-@@ -62,8 +63,11 @@ struct jz_nand {
- void __iomem *base;
- struct resource *mem;
-
-- void __iomem *bank_base;
-- struct resource *bank_mem;
-+ unsigned char banks[JZ_NAND_NUM_BANKS];
-+ void __iomem *bank_base[JZ_NAND_NUM_BANKS];
-+ struct resource *bank_mem[JZ_NAND_NUM_BANKS];
-+
-+ int selected_bank;
-
- struct jz_nand_platform_data *pdata;
- bool is_reading;
-@@ -74,26 +78,50 @@ static inline struct jz_nand *mtd_to_jz_
- return container_of(mtd, struct jz_nand, mtd);
- }
-
-+static void jz_nand_select_chip(struct mtd_info *mtd, int chipnr)
-+{
-+ struct jz_nand *nand = mtd_to_jz_nand(mtd);
-+ struct nand_chip *chip = mtd->priv;
-+ uint32_t ctrl;
-+ int banknr;
-+
-+ ctrl = readl(nand->base + JZ_REG_NAND_CTRL);
-+ ctrl &= ~JZ_NAND_CTRL_ASSERT_CHIP_MASK;
-+
-+ if (chipnr == -1) {
-+ banknr = -1;
-+ } else {
-+ banknr = nand->banks[chipnr] - 1;
-+ chip->IO_ADDR_R = nand->bank_base[banknr];
-+ chip->IO_ADDR_W = nand->bank_base[banknr];
-+ }
-+ writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
-+
-+ nand->selected_bank = banknr;
-+}
-+
- static void jz_nand_cmd_ctrl(struct mtd_info *mtd, int dat, unsigned int ctrl)
- {
- struct jz_nand *nand = mtd_to_jz_nand(mtd);
- struct nand_chip *chip = mtd->priv;
- uint32_t reg;
-+ void __iomem *bank_base = nand->bank_base[nand->selected_bank];
-+
-+ BUG_ON(nand->selected_bank < 0);
-
- if (ctrl & NAND_CTRL_CHANGE) {
- BUG_ON((ctrl & NAND_ALE) && (ctrl & NAND_CLE));
- if (ctrl & NAND_ALE)
-- chip->IO_ADDR_W = nand->bank_base + JZ_NAND_MEM_ADDR_OFFSET;
-+ bank_base += JZ_NAND_MEM_ADDR_OFFSET;
- else if (ctrl & NAND_CLE)
-- chip->IO_ADDR_W = nand->bank_base + JZ_NAND_MEM_CMD_OFFSET;
-- else
-- chip->IO_ADDR_W = nand->bank_base;
-+ bank_base += JZ_NAND_MEM_CMD_OFFSET;
-+ chip->IO_ADDR_W = bank_base;
-
- reg = readl(nand->base + JZ_REG_NAND_CTRL);
- if (ctrl & NAND_NCE)
-- reg |= JZ_NAND_CTRL_ASSERT_CHIP(0);
-+ reg |= JZ_NAND_CTRL_ASSERT_CHIP(nand->selected_bank);
- else
-- reg &= ~JZ_NAND_CTRL_ASSERT_CHIP(0);
-+ reg &= ~JZ_NAND_CTRL_ASSERT_CHIP(nand->selected_bank);
- writel(reg, nand->base + JZ_REG_NAND_CTRL);
- }
- if (dat != NAND_CMD_NONE)
-@@ -252,7 +280,7 @@ static int jz_nand_correct_ecc_rs(struct
- }
-
- static int jz_nand_ioremap_resource(struct platform_device *pdev,
-- const char *name, struct resource **res, void __iomem **base)
-+ const char *name, struct resource **res, void *__iomem *base)
- {
- int ret;
-
-@@ -288,6 +316,90 @@ err:
- return ret;
- }
-
-+static inline void jz_nand_iounmap_resource(struct resource *res, void __iomem *base)
-+{
-+ iounmap(base);
-+ release_mem_region(res->start, resource_size(res));
-+}
-+
-+static int __devinit jz_nand_detect_bank(struct platform_device *pdev, struct jz_nand *nand, unsigned char bank, size_t chipnr, uint8_t *nand_maf_id, uint8_t *nand_dev_id) {
-+ int ret;
-+ int gpio;
-+ char gpio_name[9];
-+ char res_name[6];
-+ uint32_t ctrl;
-+ struct mtd_info *mtd = &nand->mtd;
-+ struct nand_chip *chip = &nand->chip;
-+
-+ /* Request GPIO port. */
-+ gpio = JZ_GPIO_MEM_CS0 + bank - 1;
-+ sprintf(gpio_name, "NAND CS%d", bank);
-+ ret = gpio_request(gpio, gpio_name);
-+ if (ret) {
-+ dev_warn(&pdev->dev,
-+ "Failed to request %s gpio %d: %d\n",
-+ gpio_name, gpio, ret);
-+ goto notfound_gpio;
-+ }
-+
-+ /* Request I/O resource. */
-+ sprintf(res_name, "bank%d", bank);
-+ ret = jz_nand_ioremap_resource(pdev, res_name,
-+ &nand->bank_mem[bank - 1],
-+ &nand->bank_base[bank - 1]);
-+ if (ret)
-+ goto notfound_resource;
-+
-+ /* Enable chip in bank. */
-+ jz_gpio_set_function(gpio, JZ_GPIO_FUNC_MEM_CS0);
-+ ctrl = readl(nand->base + JZ_REG_NAND_CTRL);
-+ ctrl |= JZ_NAND_CTRL_ENABLE_CHIP(bank - 1);
-+ writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
-+
-+ if (chipnr == 0) {
-+ /* Detect first chip. */
-+ ret = nand_scan_ident(mtd, 1, NULL);
-+ if (ret)
-+ goto notfound_id;
-+
-+ /* Retrieve the IDs from the first chip. */
-+ chip->select_chip(mtd, 0);
-+ chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
-+ chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
-+ *nand_maf_id = chip->read_byte(mtd);
-+ *nand_dev_id = chip->read_byte(mtd);
-+ } else {
-+ /* Detect additional chip. */
-+ chip->select_chip(mtd, chipnr);
-+ chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
-+ chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
-+ if (*nand_maf_id != chip->read_byte(mtd)
-+ || *nand_dev_id != chip->read_byte(mtd)) {
-+ ret = -ENODEV;
-+ goto notfound_id;
-+ }
-+
-+ /* Update size of the MTD. */
-+ chip->numchips++;
-+ mtd->size += chip->chipsize;
-+ }
-+
-+ dev_info(&pdev->dev, "Found chip %i on bank %i\n", chipnr, bank);
-+ return 0;
-+
-+notfound_id:
-+ dev_info(&pdev->dev, "No chip found on bank %i\n", bank);
-+ ctrl &= ~(JZ_NAND_CTRL_ENABLE_CHIP(bank - 1));
-+ writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
-+ jz_gpio_set_function(gpio, JZ_GPIO_FUNC_NONE);
-+ jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
-+ nand->bank_base[bank - 1]);
-+notfound_resource:
-+ gpio_free(gpio);
-+notfound_gpio:
-+ return ret;
-+}
-+
- static int __devinit jz_nand_probe(struct platform_device *pdev)
- {
- int ret;
-@@ -295,6 +407,8 @@ static int __devinit jz_nand_probe(struc
- struct nand_chip *chip;
- struct mtd_info *mtd;
- struct jz_nand_platform_data *pdata = pdev->dev.platform_data;
-+ size_t chipnr, bank_idx;
-+ uint8_t nand_maf_id = 0, nand_dev_id = 0;
-
- nand = kzalloc(sizeof(*nand), GFP_KERNEL);
- if (!nand) {
-@@ -305,10 +419,6 @@ static int __devinit jz_nand_probe(struc
- ret = jz_nand_ioremap_resource(pdev, "mmio", &nand->mem, &nand->base);
- if (ret)
- goto err_free;
-- ret = jz_nand_ioremap_resource(pdev, "bank", &nand->bank_mem,
-- &nand->bank_base);
-- if (ret)
-- goto err_iounmap_mmio;
-
- if (pdata && gpio_is_valid(pdata->busy_gpio)) {
- ret = gpio_request(pdata->busy_gpio, "NAND busy pin");
-@@ -316,7 +426,7 @@ static int __devinit jz_nand_probe(struc
- dev_err(&pdev->dev,
- "Failed to request busy gpio %d: %d\n",
- pdata->busy_gpio, ret);
-- goto err_iounmap_mem;
-+ goto err_iounmap_mmio;
- }
- }
-
-@@ -338,22 +448,51 @@ static int __devinit jz_nand_probe(struc
-
- chip->chip_delay = 50;
- chip->cmd_ctrl = jz_nand_cmd_ctrl;
-+ chip->select_chip = jz_nand_select_chip;
-
- if (pdata && gpio_is_valid(pdata->busy_gpio))
- chip->dev_ready = jz_nand_dev_ready;
-
-- chip->IO_ADDR_R = nand->bank_base;
-- chip->IO_ADDR_W = nand->bank_base;
--
- nand->pdata = pdata;
- platform_set_drvdata(pdev, nand);
-
-- writel(JZ_NAND_CTRL_ENABLE_CHIP(0), nand->base + JZ_REG_NAND_CTRL);
--
-- ret = nand_scan_ident(mtd, 1, NULL);
-- if (ret) {
-- dev_err(&pdev->dev, "Failed to scan nand\n");
-- goto err_gpio_free;
-+ /* We are going to autodetect NAND chips in the banks specified in the
-+ * platform data. Although nand_scan_ident() can detect multiple chips,
-+ * it requires those chips to be numbered consecuitively, which is not
-+ * always the case for external memory banks. And a fixed chip-to-bank
-+ * mapping is not practical either, since for example Dingoo units
-+ * produced at different times have NAND chips in different banks.
-+ */
-+ chipnr = 0;
-+ for (bank_idx = 0; bank_idx < JZ_NAND_NUM_BANKS; bank_idx++) {
-+ unsigned char bank;
-+
-+ /* If there is no platform data, look for NAND in bank 1,
-+ * which is the most likely bank since it is the only one
-+ * that can be booted from.
-+ */
-+ bank = pdata ? pdata->banks[bank_idx] : bank_idx ^ 1;
-+ if (bank == 0)
-+ break;
-+ if (bank > JZ_NAND_NUM_BANKS) {
-+ dev_warn(&pdev->dev,
-+ "Skipping non-existing bank: %d\n", bank);
-+ continue;
-+ }
-+ /* The detection routine will directly or indirectly call
-+ * jz_nand_select_chip(), so nand->banks has to contain the
-+ * bank we're checking.
-+ */
-+ nand->banks[chipnr] = bank;
-+ if (jz_nand_detect_bank(pdev, nand, bank, chipnr,
-+ &nand_maf_id, &nand_dev_id) == 0)
-+ chipnr++;
-+ else
-+ nand->banks[chipnr] = 0;
-+ }
-+ if (chipnr == 0) {
-+ dev_err(&pdev->dev, "No NAND chips found\n");
-+ goto err_gpio_busy;
- }
-
- if (pdata && pdata->ident_callback) {
-@@ -363,8 +502,8 @@ static int __devinit jz_nand_probe(struc
-
- ret = nand_scan_tail(mtd);
- if (ret) {
-- dev_err(&pdev->dev, "Failed to scan nand\n");
-- goto err_gpio_free;
-+ dev_err(&pdev->dev, "Failed to scan NAND\n");
-+ goto err_unclaim_banks;
- }
-
- ret = mtd_device_parse_register(mtd, NULL, 0,
-@@ -381,14 +520,21 @@ static int __devinit jz_nand_probe(struc
- return 0;
-
- err_nand_release:
-- nand_release(&nand->mtd);
--err_gpio_free:
-+ nand_release(mtd);
-+err_unclaim_banks:
-+ while (chipnr--) {
-+ unsigned char bank = nand->banks[chipnr];
-+ gpio_free(JZ_GPIO_MEM_CS0 + bank - 1);
-+ jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
-+ nand->bank_base[bank - 1]);
-+ }
-+ writel(0, nand->base + JZ_REG_NAND_CTRL);
-+err_gpio_busy:
-+ if (pdata && gpio_is_valid(pdata->busy_gpio))
-+ gpio_free(pdata->busy_gpio);
- platform_set_drvdata(pdev, NULL);
-- gpio_free(pdata->busy_gpio);
--err_iounmap_mem:
-- iounmap(nand->bank_base);
- err_iounmap_mmio:
-- iounmap(nand->base);
-+ jz_nand_iounmap_resource(nand->mem, nand->base);
- err_free:
- kfree(nand);
- return ret;
-@@ -397,16 +543,26 @@ err_free:
- static int __devexit jz_nand_remove(struct platform_device *pdev)
- {
- struct jz_nand *nand = platform_get_drvdata(pdev);
-+ struct jz_nand_platform_data *pdata = pdev->dev.platform_data;
-+ size_t i;
-
- nand_release(&nand->mtd);
-
- /* Deassert and disable all chips */
- writel(0, nand->base + JZ_REG_NAND_CTRL);
-
-- iounmap(nand->bank_base);
-- release_mem_region(nand->bank_mem->start, resource_size(nand->bank_mem));
-- iounmap(nand->base);
-- release_mem_region(nand->mem->start, resource_size(nand->mem));
-+ for (i = 0; i < JZ_NAND_NUM_BANKS; ++i) {
-+ unsigned char bank = nand->banks[i];
-+ if (bank != 0) {
-+ jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
-+ nand->bank_base[bank - 1]);
-+ gpio_free(JZ_GPIO_MEM_CS0 + bank - 1);
-+ }
-+ }
-+ if (pdata && gpio_is_valid(pdata->busy_gpio))
-+ gpio_free(pdata->busy_gpio);
-+
-+ jz_nand_iounmap_resource(nand->mem, nand->base);
-
- platform_set_drvdata(pdev, NULL);
- kfree(nand);
diff --git a/target/linux/xburst/patches-3.3/0007-Add-ili8960-lcd-driver.patch b/target/linux/xburst/patches-3.3/0007-Add-ili8960-lcd-driver.patch
deleted file mode 100644
index d7eaa0793f..0000000000
--- a/target/linux/xburst/patches-3.3/0007-Add-ili8960-lcd-driver.patch
+++ /dev/null
@@ -1,304 +0,0 @@
-From 2248fb9c47fe7e72c735d6c16aba27bf92e1673a Mon Sep 17 00:00:00 2001
-From: Lars-Peter Clausen <lars@metafoo.de>
-Date: Sun, 1 Aug 2010 21:19:40 +0200
-Subject: [PATCH 07/21] Add ili8960 lcd driver
-
----
- drivers/video/backlight/Kconfig | 7 +
- drivers/video/backlight/Makefile | 1 +
- drivers/video/backlight/ili8960.c | 263 +++++++++++++++++++++++++++++++++++++
- 3 files changed, 271 insertions(+), 0 deletions(-)
- create mode 100644 drivers/video/backlight/ili8960.c
-
---- a/drivers/video/backlight/Kconfig
-+++ b/drivers/video/backlight/Kconfig
-@@ -59,6 +59,13 @@ config LCD_LTV350QV
-
- The LTV350QV panel is present on all ATSTK1000 boards.
-
-+config LCD_ILI8960
-+ tristate "Ilitek ili8960 LCD driver"
-+ depends on LCD_CLASS_DEVICE && SPI
-+ default n
-+ help
-+ Driver for the Ilitek ili8960 LCD controller chip.
-+
- config LCD_ILI9320
- tristate
- help
---- a/drivers/video/backlight/Makefile
-+++ b/drivers/video/backlight/Makefile
-@@ -6,6 +6,7 @@ obj-$(CONFIG_LCD_HP700) += jornada72
- obj-$(CONFIG_LCD_L4F00242T03) += l4f00242t03.o
- obj-$(CONFIG_LCD_LMS283GF05) += lms283gf05.o
- obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o
-+obj-$(CONFIG_LCD_ILI8960) += ili8960.o
- obj-$(CONFIG_LCD_ILI9320) += ili9320.o
- obj-$(CONFIG_LCD_PLATFORM) += platform_lcd.o
- obj-$(CONFIG_LCD_VGG2432A4) += vgg2432a4.o
---- /dev/null
-+++ b/drivers/video/backlight/ili8960.c
-@@ -0,0 +1,263 @@
-+/*
-+ * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
-+ * Driver for Ilitek ili8960 LCD
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/spi/spi.h>
-+#include <linux/lcd.h>
-+#include <linux/backlight.h>
-+#include <linux/delay.h>
-+
-+struct ili8960 {
-+ struct spi_device *spi;
-+ struct lcd_device *lcd;
-+ struct backlight_device *bl;
-+ bool enabled;
-+ unsigned int brightness;
-+};
-+
-+#define ILI8960_REG_BRIGHTNESS 0x03
-+#define ILI8960_REG_POWER 0x05
-+#define ILI8960_REG_CONTRAST 0x0d
-+
-+static int ili8960_write_reg(struct spi_device *spi, uint8_t reg,
-+ uint8_t data)
-+{
-+ uint8_t buf[2];
-+ buf[0] = ((reg & 0x40) << 1) | (reg & 0x3f);
-+ buf[1] = data;
-+
-+ return spi_write(spi, buf, sizeof(buf));
-+}
-+
-+static int ili8960_programm_power(struct spi_device *spi, bool enabled)
-+{
-+ int ret;
-+
-+ if (enabled)
-+ mdelay(20);
-+
-+ ret = ili8960_write_reg(spi, ILI8960_REG_POWER, enabled ? 0xc7 : 0xc6);
-+
-+ if (!enabled)
-+ mdelay(20);
-+
-+ return ret;
-+}
-+
-+static int ili8960_set_power(struct lcd_device *lcd, int power)
-+{
-+ struct ili8960 *ili8960 = lcd_get_data(lcd);
-+
-+ switch (power) {
-+ case FB_BLANK_UNBLANK:
-+ ili8960->enabled = true;
-+ break;
-+ default:
-+ ili8960->enabled = false;
-+ break;
-+ }
-+
-+ return ili8960_programm_power(ili8960->spi, ili8960->enabled);
-+}
-+
-+static int ili8960_get_power(struct lcd_device *lcd)
-+{
-+ struct ili8960 *ili8960 = lcd_get_data(lcd);
-+ return ili8960->enabled ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN;
-+}
-+
-+static int ili8960_set_contrast(struct lcd_device *lcd, int contrast)
-+{
-+ struct ili8960 *ili8960 = lcd_get_data(lcd);
-+
-+ return ili8960_write_reg(ili8960->spi, ILI8960_REG_CONTRAST, contrast);
-+}
-+
-+static int ili8960_set_mode(struct lcd_device *lcd, struct fb_videomode *mode)
-+{
-+ if (mode->xres != 320 && mode->yres != 240)
-+ return -EINVAL;
-+
-+ return 0;
-+}
-+
-+static int ili8960_set_brightness(struct ili8960 *ili8960, int brightness)
-+{
-+ int ret;
-+
-+ ret = ili8960_write_reg(ili8960->spi, ILI8960_REG_BRIGHTNESS, brightness);
-+
-+ if (ret == 0)
-+ ili8960->brightness = brightness;
-+
-+ return ret;
-+}
-+
-+static ssize_t ili8960_show_brightness(struct device *dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ struct lcd_device *ld = to_lcd_device(dev);
-+ struct ili8960 *ili8960 = lcd_get_data(ld);
-+
-+ return sprintf(buf, "%u\n", ili8960->brightness);
-+}
-+
-+static ssize_t ili8960_store_brightness(struct device *dev,
-+ struct device_attribute *attr, const char *buf, size_t count)
-+{
-+ struct lcd_device *ld = to_lcd_device(dev);
-+ struct ili8960 *ili8960 = lcd_get_data(ld);
-+ unsigned long brightness;
-+ int ret;
-+
-+ ret = strict_strtoul(buf, 0, &brightness);
-+ if (ret)
-+ return ret;
-+
-+ if (brightness > 255)
-+ return -EINVAL;
-+
-+ ili8960_set_brightness(ili8960, brightness);
-+
-+ return count;
-+}
-+
-+
-+static DEVICE_ATTR(brightness, 0644, ili8960_show_brightness,
-+ ili8960_store_brightness);
-+
-+static struct lcd_ops ili8960_lcd_ops = {
-+ .set_power = ili8960_set_power,
-+ .get_power = ili8960_get_power,
-+ .set_contrast = ili8960_set_contrast,
-+ .set_mode = ili8960_set_mode,
-+};
-+
-+static int __devinit ili8960_probe(struct spi_device *spi)
-+{
-+ int ret;
-+ struct ili8960 *ili8960;
-+
-+ ili8960 = kmalloc(sizeof(*ili8960), GFP_KERNEL);
-+ if (!ili8960)
-+ return -ENOMEM;
-+
-+ spi->bits_per_word = 8;
-+ spi->mode = SPI_MODE_3;
-+
-+ ret = spi_setup(spi);
-+ if (ret) {
-+ dev_err(&spi->dev, "Failed to setup spi\n");
-+ goto err_free_ili8960;
-+ }
-+
-+ ili8960->spi = spi;
-+
-+ ili8960->lcd = lcd_device_register("ili8960-lcd", &spi->dev, ili8960,
-+ &ili8960_lcd_ops);
-+
-+ if (IS_ERR(ili8960->lcd)) {
-+ ret = PTR_ERR(ili8960->lcd);
-+ dev_err(&spi->dev, "Failed to register lcd device: %d\n", ret);
-+ goto err_free_ili8960;
-+ }
-+
-+ ili8960->lcd->props.max_contrast = 255;
-+
-+ ret = device_create_file(&ili8960->lcd->dev, &dev_attr_brightness);
-+ if (ret)
-+ goto err_unregister_lcd;
-+
-+ ili8960_programm_power(ili8960->spi, true);
-+ ili8960->enabled = true;
-+
-+ spi_set_drvdata(spi, ili8960);
-+
-+ ili8960_write_reg(spi, 0x13, 0x01);
-+
-+ return 0;
-+err_unregister_lcd:
-+ lcd_device_unregister(ili8960->lcd);
-+err_free_ili8960:
-+ kfree(ili8960);
-+ return ret;
-+}
-+
-+static int __devexit ili8960_remove(struct spi_device *spi)
-+{
-+ struct ili8960 *ili8960 = spi_get_drvdata(spi);
-+
-+ device_remove_file(&ili8960->lcd->dev, &dev_attr_brightness);
-+ lcd_device_unregister(ili8960->lcd);
-+
-+ spi_set_drvdata(spi, NULL);
-+ kfree(ili8960);
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+
-+static int ili8960_suspend(struct spi_device *spi, pm_message_t state)
-+{
-+ struct ili8960 *ili8960 = spi_get_drvdata(spi);
-+
-+ if (ili8960->enabled)
-+ ili8960_programm_power(ili8960->spi, false);
-+
-+ return 0;
-+}
-+
-+static int ili8960_resume(struct spi_device *spi)
-+{
-+ struct ili8960 *ili8960 = spi_get_drvdata(spi);
-+
-+ if (ili8960->enabled)
-+ ili8960_programm_power(ili8960->spi, true);
-+
-+ return 0;
-+}
-+
-+#else
-+#define ili8960_suspend NULL
-+#define ili8960_resume NULL
-+#endif
-+
-+static struct spi_driver ili8960_driver = {
-+ .driver = {
-+ .name = "ili8960",
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = ili8960_probe,
-+ .remove = __devexit_p(ili8960_remove),
-+ .suspend = ili8960_suspend,
-+ .resume = ili8960_resume,
-+};
-+
-+static int __init ili8960_init(void)
-+{
-+ return spi_register_driver(&ili8960_driver);
-+}
-+module_init(ili8960_init);
-+
-+static void __exit ili8960_exit(void)
-+{
-+ spi_unregister_driver(&ili8960_driver);
-+}
-+module_exit(ili8960_exit)
-+
-+MODULE_AUTHOR("Lars-Peter Clausen");
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("LCD driver for Ilitek ili8960");
-+MODULE_ALIAS("spi:ili8960");
diff --git a/target/linux/xburst/patches-3.3/0008-qi_lb60-Don-t-use-3-wire-spi-mode-for-the-display-fo.patch b/target/linux/xburst/patches-3.3/0008-qi_lb60-Don-t-use-3-wire-spi-mode-for-the-display-fo.patch
deleted file mode 100644
index 223459cab4..0000000000
--- a/target/linux/xburst/patches-3.3/0008-qi_lb60-Don-t-use-3-wire-spi-mode-for-the-display-fo.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From e5f25e25ed6c0478cbba7a32891b911e3183dad4 Mon Sep 17 00:00:00 2001
-From: Lars-Peter Clausen <lars@metafoo.de>
-Date: Wed, 13 Oct 2010 01:17:24 +0200
-Subject: [PATCH 08/21] qi_lb60: Don't use 3-wire spi mode for the display for
- now
-
-The spi_gpio driver does not support 3-wire mode.
----
- arch/mips/jz4740/board-qi_lb60.c | 1 -
- 1 files changed, 0 insertions(+), 1 deletions(-)
-
---- a/arch/mips/jz4740/board-qi_lb60.c
-+++ b/arch/mips/jz4740/board-qi_lb60.c
-@@ -310,7 +310,6 @@ static struct spi_board_info qi_lb60_spi
- .chip_select = 0,
- .bus_num = 1,
- .max_speed_hz = 30 * 1000,
-- .mode = SPI_3WIRE,
- },
- };
-
diff --git a/target/linux/xburst/patches-3.3/0009-dev-mem-Add-kernel-config-option-to-omit-this-device.patch b/target/linux/xburst/patches-3.3/0009-dev-mem-Add-kernel-config-option-to-omit-this-device.patch
deleted file mode 100644
index 28388fba76..0000000000
--- a/target/linux/xburst/patches-3.3/0009-dev-mem-Add-kernel-config-option-to-omit-this-device.patch
+++ /dev/null
@@ -1,124 +0,0 @@
-From 4003b9a2c05f4d0d37535c3dffbf4a7b47d5c36c Mon Sep 17 00:00:00 2001
-From: Maarten ter Huurne <maarten@treewalker.org>
-Date: Wed, 8 Sep 2010 02:31:19 +0200
-Subject: [PATCH 09/21] /dev/mem: Add kernel config option to omit this
- device.
-
-Omitting this device prevents software from accessing the hardware directly, which can cause trouble if the kernel accesses the same hardware.
-It also saves some space on embedded systems.
----
- arch/x86/Kconfig.debug | 1 +
- drivers/char/Kconfig | 10 ++++++++++
- drivers/char/mem.c | 17 +++++++++++++++++
- 3 files changed, 28 insertions(+), 0 deletions(-)
-
---- a/arch/x86/Kconfig.debug
-+++ b/arch/x86/Kconfig.debug
-@@ -7,6 +7,7 @@ source "lib/Kconfig.debug"
-
- config STRICT_DEVMEM
- bool "Filter access to /dev/mem"
-+ depends on DEVMEM
- ---help---
- If this option is disabled, you allow userspace (root) access to all
- of memory, including kernel and userspace memory. Accidental
---- a/drivers/char/Kconfig
-+++ b/drivers/char/Kconfig
-@@ -6,6 +6,16 @@ menu "Character devices"
-
- source "drivers/tty/Kconfig"
-
-+config DEVMEM
-+ bool "/dev/mem virtual device support"
-+ default y
-+ help
-+ Say Y here if you want to support the /dev/mem device.
-+ Some X server drivers access the video hardware using this device.
-+ Accessing hardware directly from user space can be useful in some
-+ cases, but it is not without risks.
-+ When in doubt, say "N".
-+
- config DEVKMEM
- bool "/dev/kmem virtual device support"
- default y
---- a/drivers/char/mem.c
-+++ b/drivers/char/mem.c
-@@ -87,6 +87,8 @@ void __weak unxlate_dev_mem_ptr(unsigned
- {
- }
-
-+#ifdef CONFIG_DEVMEM
-+
- /*
- * This funcion reads the *physical* memory. The f_pos points directly to the
- * memory location.
-@@ -210,6 +212,10 @@ static ssize_t write_mem(struct file *fi
- return written;
- }
-
-+#endif
-+
-+#if defined(CONFIG_DEVMEM) || defined(CONFIG_DEVKMEM)
-+
- int __weak phys_mem_access_prot_allowed(struct file *file,
- unsigned long pfn, unsigned long size, pgprot_t *vma_prot)
- {
-@@ -331,6 +337,8 @@ static int mmap_mem(struct file *file, s
- return 0;
- }
-
-+#endif
-+
- #ifdef CONFIG_DEVKMEM
- static int mmap_kmem(struct file *file, struct vm_area_struct *vma)
- {
-@@ -694,6 +702,7 @@ static loff_t null_lseek(struct file *fi
- return file->f_pos = 0;
- }
-
-+#if defined(CONFIG_DEVMEM) || defined(CONFIG_DEVKMEM) || defined(CONFIG_DEVPORT)
- /*
- * The memory devices use the full 32/64 bits of the offset, and so we cannot
- * check against negative addresses: they are ok. The return value is weird,
-@@ -726,11 +735,15 @@ static loff_t memory_lseek(struct file *
- mutex_unlock(&file->f_path.dentry->d_inode->i_mutex);
- return ret;
- }
-+#endif
-
-+#if defined(CONFIG_DEVMEM) || defined(CONFIG_DEVKMEM) || \
-+ defined(CONFIG_DEVPORT) || defined(CONFIG_CRASH_DUMP)
- static int open_port(struct inode * inode, struct file * filp)
- {
- return capable(CAP_SYS_RAWIO) ? 0 : -EPERM;
- }
-+#endif
-
- #define zero_lseek null_lseek
- #define full_lseek null_lseek
-@@ -740,6 +753,7 @@ static int open_port(struct inode * inod
- #define open_kmem open_mem
- #define open_oldmem open_mem
-
-+#ifdef CONFIG_DEVMEM
- static const struct file_operations mem_fops = {
- .llseek = memory_lseek,
- .read = read_mem,
-@@ -748,6 +762,7 @@ static const struct file_operations mem_
- .open = open_mem,
- .get_unmapped_area = get_unmapped_area_mem,
- };
-+#endif
-
- #ifdef CONFIG_DEVKMEM
- static const struct file_operations kmem_fops = {
-@@ -851,7 +866,9 @@ static const struct memdev {
- const struct file_operations *fops;
- struct backing_dev_info *dev_info;
- } devlist[] = {
-+#ifdef CONFIG_DEVMEM
- [1] = { "mem", 0, &mem_fops, &directly_mappable_cdev_bdi },
-+#endif
- #ifdef CONFIG_DEVKMEM
- [2] = { "kmem", 0, &kmem_fops, &directly_mappable_cdev_bdi },
- #endif
diff --git a/target/linux/xburst/patches-3.3/0010-cpufreq_stats-Support-runtime-changes-to-frequency-t.patch b/target/linux/xburst/patches-3.3/0010-cpufreq_stats-Support-runtime-changes-to-frequency-t.patch
deleted file mode 100644
index 95803e313a..0000000000
--- a/target/linux/xburst/patches-3.3/0010-cpufreq_stats-Support-runtime-changes-to-frequency-t.patch
+++ /dev/null
@@ -1,301 +0,0 @@
-From ca40c7542f0cd0e0dfa074bd4ccefc04b8561427 Mon Sep 17 00:00:00 2001
-From: Maarten ter Huurne <maarten@treewalker.org>
-Date: Tue, 2 Aug 2011 10:26:09 +0200
-Subject: [PATCH 10/21] cpufreq_stats: Support runtime changes to frequency
- table.
-
----
- drivers/cpufreq/cpufreq_stats.c | 161 ++++++++++++++++++++-------------------
- 1 files changed, 83 insertions(+), 78 deletions(-)
-
---- a/drivers/cpufreq/cpufreq_stats.c
-+++ b/drivers/cpufreq/cpufreq_stats.c
-@@ -20,6 +20,7 @@
- #include <linux/kobject.h>
- #include <linux/spinlock.h>
- #include <linux/notifier.h>
-+#include <linux/string.h>
- #include <asm/cputime.h>
-
- static spinlock_t cpufreq_stats_lock;
-@@ -36,7 +37,7 @@ struct cpufreq_stats {
- unsigned long long last_time;
- unsigned int max_state;
- unsigned int state_num;
-- unsigned int last_index;
-+ int last_index;
- cputime64_t *time_in_state;
- unsigned int *freq_table;
- #ifdef CONFIG_CPU_FREQ_STAT_DETAILS
-@@ -59,7 +60,7 @@ static int cpufreq_stats_update(unsigned
- cur_time = get_jiffies_64();
- spin_lock(&cpufreq_stats_lock);
- stat = per_cpu(cpufreq_stats_table, cpu);
-- if (stat->time_in_state)
-+ if (stat->time_in_state && stat->last_index != -1)
- stat->time_in_state[stat->last_index] +=
- cur_time - stat->last_time;
- stat->last_time = cur_time;
-@@ -81,7 +82,7 @@ static ssize_t show_time_in_state(struct
- ssize_t len = 0;
- int i;
- struct cpufreq_stats *stat = per_cpu(cpufreq_stats_table, policy->cpu);
-- if (!stat)
-+ if (!stat || !stat->time_in_state)
- return 0;
- cpufreq_stats_update(stat->cpu);
- for (i = 0; i < stat->state_num; i++) {
-@@ -99,7 +100,7 @@ static ssize_t show_trans_table(struct c
- int i, j;
-
- struct cpufreq_stats *stat = per_cpu(cpufreq_stats_table, policy->cpu);
-- if (!stat)
-+ if (!stat || !stat->trans_table)
- return 0;
- cpufreq_stats_update(stat->cpu);
- len += snprintf(buf + len, PAGE_SIZE - len, " From : To\n");
-@@ -158,63 +159,35 @@ static struct attribute_group stats_attr
- static int freq_table_get_index(struct cpufreq_stats *stat, unsigned int freq)
- {
- int index;
-- for (index = 0; index < stat->max_state; index++)
-- if (stat->freq_table[index] == freq)
-- return index;
-+ if (stat->freq_table)
-+ for (index = 0; index < stat->max_state; index++)
-+ if (stat->freq_table[index] == freq)
-+ return index;
- return -1;
- }
-
--/* should be called late in the CPU removal sequence so that the stats
-- * memory is still available in case someone tries to use it.
-- */
- static void cpufreq_stats_free_table(unsigned int cpu)
- {
- struct cpufreq_stats *stat = per_cpu(cpufreq_stats_table, cpu);
-+ struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
-+ if (policy && policy->cpu == cpu)
-+ sysfs_remove_group(&policy->kobj, &stats_attr_group);
- if (stat) {
- kfree(stat->time_in_state);
- kfree(stat);
- }
- per_cpu(cpufreq_stats_table, cpu) = NULL;
--}
--
--/* must be called early in the CPU removal sequence (before
-- * cpufreq_remove_dev) so that policy is still valid.
-- */
--static void cpufreq_stats_free_sysfs(unsigned int cpu)
--{
-- struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
-- if (policy && policy->cpu == cpu)
-- sysfs_remove_group(&policy->kobj, &stats_attr_group);
- if (policy)
- cpufreq_cpu_put(policy);
- }
-
--static int cpufreq_stats_create_table(struct cpufreq_policy *policy,
-+static int cpufreq_stats_update_table(struct cpufreq_policy *policy,
- struct cpufreq_frequency_table *table)
- {
-- unsigned int i, j, count = 0, ret = 0;
-- struct cpufreq_stats *stat;
-- struct cpufreq_policy *data;
-+ unsigned int i, j, count = 0;
- unsigned int alloc_size;
- unsigned int cpu = policy->cpu;
-- if (per_cpu(cpufreq_stats_table, cpu))
-- return -EBUSY;
-- stat = kzalloc(sizeof(struct cpufreq_stats), GFP_KERNEL);
-- if ((stat) == NULL)
-- return -ENOMEM;
--
-- data = cpufreq_cpu_get(cpu);
-- if (data == NULL) {
-- ret = -EINVAL;
-- goto error_get_fail;
-- }
--
-- ret = sysfs_create_group(&data->kobj, &stats_attr_group);
-- if (ret)
-- goto error_out;
--
-- stat->cpu = cpu;
-- per_cpu(cpufreq_stats_table, cpu) = stat;
-+ struct cpufreq_stats *stat = per_cpu(cpufreq_stats_table, cpu);
-
- for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
- unsigned int freq = table[i].frequency;
-@@ -223,40 +196,73 @@ static int cpufreq_stats_create_table(st
- count++;
- }
-
-+ if (stat->max_state != count) {
-+ stat->max_state = count;
-+ kfree(stat->time_in_state);
-+ stat->time_in_state = NULL;
-+ }
- alloc_size = count * sizeof(int) + count * sizeof(cputime64_t);
--
- #ifdef CONFIG_CPU_FREQ_STAT_DETAILS
- alloc_size += count * count * sizeof(int);
- #endif
-- stat->max_state = count;
-- stat->time_in_state = kzalloc(alloc_size, GFP_KERNEL);
-- if (!stat->time_in_state) {
-- ret = -ENOMEM;
-- goto error_out;
-- }
-- stat->freq_table = (unsigned int *)(stat->time_in_state + count);
--
-+ if (stat->time_in_state) {
-+ memset(stat->time_in_state, 0, alloc_size);
-+ } else {
-+ stat->time_in_state = kzalloc(alloc_size, GFP_KERNEL);
-+ if (!stat->time_in_state)
-+ return -ENOMEM;
-+ stat->freq_table = (unsigned int *)(
-+ stat->time_in_state + count);
- #ifdef CONFIG_CPU_FREQ_STAT_DETAILS
-- stat->trans_table = stat->freq_table + count;
-+ stat->trans_table = stat->freq_table + count;
- #endif
-+ }
-+
- j = 0;
-- for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
-- unsigned int freq = table[i].frequency;
-- if (freq == CPUFREQ_ENTRY_INVALID)
-- continue;
-- if (freq_table_get_index(stat, freq) == -1)
-- stat->freq_table[j++] = freq;
-+ if (stat->freq_table) {
-+ for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
-+ unsigned int freq = table[i].frequency;
-+ if (freq == CPUFREQ_ENTRY_INVALID)
-+ continue;
-+ if (freq_table_get_index(stat, freq) == -1)
-+ stat->freq_table[j++] = freq;
-+ }
- }
- stat->state_num = j;
- spin_lock(&cpufreq_stats_lock);
- stat->last_time = get_jiffies_64();
- stat->last_index = freq_table_get_index(stat, policy->cur);
- spin_unlock(&cpufreq_stats_lock);
-+ return 0;
-+}
-+
-+static int cpufreq_stats_create_table(struct cpufreq_policy *policy,
-+ struct cpufreq_frequency_table *table)
-+{
-+ unsigned int ret = 0;
-+ struct cpufreq_stats *stat;
-+ struct cpufreq_policy *data;
-+ unsigned int cpu = policy->cpu;
-+
-+ stat = kzalloc(sizeof(struct cpufreq_stats), GFP_KERNEL);
-+ if ((stat) == NULL)
-+ return -ENOMEM;
-+
-+ data = cpufreq_cpu_get(cpu);
-+ if (data == NULL) {
-+ ret = -EINVAL;
-+ goto error_out;
-+ }
-+ ret = sysfs_create_group(&data->kobj, &stats_attr_group);
- cpufreq_cpu_put(data);
-+ if (ret)
-+ goto error_out;
-+
-+ stat->cpu = cpu;
-+ per_cpu(cpufreq_stats_table, cpu) = stat;
-+
- return 0;
- error_out:
-- cpufreq_cpu_put(data);
--error_get_fail:
- kfree(stat);
- per_cpu(cpufreq_stats_table, cpu) = NULL;
- return ret;
-@@ -274,10 +280,12 @@ static int cpufreq_stat_notifier_policy(
- table = cpufreq_frequency_get_table(cpu);
- if (!table)
- return 0;
-- ret = cpufreq_stats_create_table(policy, table);
-- if (ret)
-- return ret;
-- return 0;
-+ if (!per_cpu(cpufreq_stats_table, cpu)) {
-+ ret = cpufreq_stats_create_table(policy, table);
-+ if (ret)
-+ return ret;
-+ }
-+ return cpufreq_stats_update_table(policy, table);
- }
-
- static int cpufreq_stat_notifier_trans(struct notifier_block *nb,
-@@ -297,21 +305,23 @@ static int cpufreq_stat_notifier_trans(s
- old_index = stat->last_index;
- new_index = freq_table_get_index(stat, freq->new);
-
-- /* We can't do stat->time_in_state[-1]= .. */
-- if (old_index == -1 || new_index == -1)
-- return 0;
--
- cpufreq_stats_update(freq->cpu);
--
- if (old_index == new_index)
- return 0;
-
-+ if (new_index == -1)
-+ return 0;
-+
- spin_lock(&cpufreq_stats_lock);
- stat->last_index = new_index;
-+ if (old_index != -1) {
- #ifdef CONFIG_CPU_FREQ_STAT_DETAILS
-- stat->trans_table[old_index * stat->max_state + new_index]++;
-+ if (stat->trans_table)
-+ stat->trans_table[old_index * stat->max_state +
-+ new_index]++;
- #endif
-- stat->total_trans++;
-+ stat->total_trans++;
-+ }
- spin_unlock(&cpufreq_stats_lock);
- return 0;
- }
-@@ -327,9 +337,6 @@ static int __cpuinit cpufreq_stat_cpu_ca
- case CPU_ONLINE_FROZEN:
- cpufreq_update_policy(cpu);
- break;
-- case CPU_DOWN_PREPARE:
-- cpufreq_stats_free_sysfs(cpu);
-- break;
- case CPU_DEAD:
- case CPU_DEAD_FROZEN:
- cpufreq_stats_free_table(cpu);
-@@ -338,10 +345,9 @@ static int __cpuinit cpufreq_stat_cpu_ca
- return NOTIFY_OK;
- }
-
--/* priority=1 so this will get called before cpufreq_remove_dev */
--static struct notifier_block cpufreq_stat_cpu_notifier __refdata = {
-+static struct notifier_block cpufreq_stat_cpu_notifier __refdata =
-+{
- .notifier_call = cpufreq_stat_cpu_callback,
-- .priority = 1,
- };
-
- static struct notifier_block notifier_policy_block = {
-@@ -388,7 +394,6 @@ static void __exit cpufreq_stats_exit(vo
- unregister_hotcpu_notifier(&cpufreq_stat_cpu_notifier);
- for_each_online_cpu(cpu) {
- cpufreq_stats_free_table(cpu);
-- cpufreq_stats_free_sysfs(cpu);
- }
- }
-
diff --git a/target/linux/xburst/patches-3.3/0011-MIPS-JZ4740-Added-setting-of-PLL-rate-and-main-divid.patch b/target/linux/xburst/patches-3.3/0011-MIPS-JZ4740-Added-setting-of-PLL-rate-and-main-divid.patch
deleted file mode 100644
index 01c211ba77..0000000000
--- a/target/linux/xburst/patches-3.3/0011-MIPS-JZ4740-Added-setting-of-PLL-rate-and-main-divid.patch
+++ /dev/null
@@ -1,351 +0,0 @@
-From 27ff621cd9a5347efda4be502abbef13a99146ce Mon Sep 17 00:00:00 2001
-From: Maarten ter Huurne <maarten@treewalker.org>
-Date: Sun, 29 Aug 2010 08:11:00 +0200
-Subject: [PATCH 11/21] MIPS: JZ4740: Added setting of PLL rate and main
- dividers.
-
-This functionality makes a cpufreq driver possible.
-Squashed version of the development done in the jz-2.6.39 branch.
----
- arch/mips/jz4740/clock.c | 230 ++++++++++++++++++++++++++++++++++++++++++++--
- arch/mips/jz4740/clock.h | 4 +
- 2 files changed, 224 insertions(+), 10 deletions(-)
-
---- a/arch/mips/jz4740/clock.c
-+++ b/arch/mips/jz4740/clock.c
-@@ -1,5 +1,8 @@
- /*
-+ * Copyright (c) 2006-2007, Ingenic Semiconductor Inc.
- * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
-+ * Copyright (c) 2010, Ulrich Hecht <ulrich.hecht@gmail.com>
-+ * Copyright (c) 2010, Maarten ter Huurne <maarten@treewalker.org>
- * JZ4740 SoC clock support
- *
- * This program is free software; you can redistribute it and/or modify it
-@@ -41,16 +44,20 @@
- #define JZ_CLOCK_CTRL_I2S_SRC_PLL BIT(31)
- #define JZ_CLOCK_CTRL_KO_ENABLE BIT(30)
- #define JZ_CLOCK_CTRL_UDC_SRC_PLL BIT(29)
--#define JZ_CLOCK_CTRL_UDIV_MASK 0x1f800000
- #define JZ_CLOCK_CTRL_CHANGE_ENABLE BIT(22)
- #define JZ_CLOCK_CTRL_PLL_HALF BIT(21)
--#define JZ_CLOCK_CTRL_LDIV_MASK 0x001f0000
- #define JZ_CLOCK_CTRL_UDIV_OFFSET 23
- #define JZ_CLOCK_CTRL_LDIV_OFFSET 16
- #define JZ_CLOCK_CTRL_MDIV_OFFSET 12
- #define JZ_CLOCK_CTRL_PDIV_OFFSET 8
- #define JZ_CLOCK_CTRL_HDIV_OFFSET 4
- #define JZ_CLOCK_CTRL_CDIV_OFFSET 0
-+#define JZ_CLOCK_CTRL_UDIV_MASK (0x3f << JZ_CLOCK_CTRL_UDIV_OFFSET)
-+#define JZ_CLOCK_CTRL_LDIV_MASK (0x1f << JZ_CLOCK_CTRL_LDIV_OFFSET)
-+#define JZ_CLOCK_CTRL_MDIV_MASK (0x0f << JZ_CLOCK_CTRL_MDIV_OFFSET)
-+#define JZ_CLOCK_CTRL_PDIV_MASK (0x0f << JZ_CLOCK_CTRL_PDIV_OFFSET)
-+#define JZ_CLOCK_CTRL_HDIV_MASK (0x0f << JZ_CLOCK_CTRL_HDIV_OFFSET)
-+#define JZ_CLOCK_CTRL_CDIV_MASK (0x0f << JZ_CLOCK_CTRL_CDIV_OFFSET)
-
- #define JZ_CLOCK_GATE_UART0 BIT(0)
- #define JZ_CLOCK_GATE_TCU BIT(1)
-@@ -90,6 +97,7 @@
- #define JZ_CLOCK_PLL_M_OFFSET 23
- #define JZ_CLOCK_PLL_N_OFFSET 18
- #define JZ_CLOCK_PLL_OD_OFFSET 16
-+#define JZ_CLOCK_PLL_STABILIZE_OFFSET 0
-
- #define JZ_CLOCK_LOW_POWER_MODE_DOZE BIT(2)
- #define JZ_CLOCK_LOW_POWER_MODE_SLEEP BIT(0)
-@@ -97,10 +105,15 @@
- #define JZ_CLOCK_SLEEP_CTRL_SUSPEND_UHC BIT(7)
- #define JZ_CLOCK_SLEEP_CTRL_ENABLE_UDC BIT(6)
-
-+#define JZ_REG_EMC_RTCNT 0x88
-+#define JZ_REG_EMC_RTCOR 0x8C
-+
- static void __iomem *jz_clock_base;
- static spinlock_t jz_clock_lock;
- static LIST_HEAD(jz_clocks);
-
-+static void __iomem *jz_emc_base;
-+
- struct main_clk {
- struct clk clk;
- uint32_t div_offset;
-@@ -204,25 +217,88 @@ static int jz_clk_ko_is_enabled(struct c
- return !!(jz_clk_reg_read(JZ_REG_CLOCK_CTRL) & JZ_CLOCK_CTRL_KO_ENABLE);
- }
-
-+static struct static_clk jz_clk_ext;
-+
-+static unsigned long jz_clk_pll_calc_rate(
-+ unsigned int in_div, unsigned int feedback, unsigned int out_div)
-+{
-+ return ((jz_clk_ext.rate / in_div) * feedback) / out_div;
-+}
-+
-+static void jz_clk_pll_calc_dividers(unsigned long rate,
-+ unsigned int *in_div, unsigned int *feedback, unsigned int *out_div)
-+{
-+ unsigned int target;
-+
-+ /* The frequency after the input divider must be between 1 and 15 MHz.
-+ The highest divider yields the best resolution. */
-+ *in_div = jz_clk_ext.rate / 1000000;
-+ if (*in_div >= 34)
-+ *in_div = 33;
-+
-+ /* The frequency before the output divider must be between 100 and
-+ 500 MHz. The lowest target rate is more energy efficient. */
-+ if (rate < 25000000) {
-+ *out_div = 4;
-+ target = 25000000 * 4;
-+ } else if (rate <= 50000000) {
-+ *out_div = 4;
-+ target = rate * 4;
-+ } else if (rate <= 100000000) {
-+ *out_div = 2;
-+ target = rate * 2;
-+ } else if (rate <= 500000000) {
-+ *out_div = 1;
-+ target = rate;
-+ } else {
-+ *out_div = 1;
-+ target = 500000000;
-+ }
-+
-+ /* Compute the feedback divider.
-+ Since the divided input is at least 1 MHz and the target frequency
-+ at most 500 MHz, the feedback will be at most 500 and will therefore
-+ always fit in the 9-bit register.
-+ Similarly, the divided input is at most 15 MHz and the target
-+ frequency at least 100 MHz, so the feedback will be at least 6
-+ where the minimum supported value is 2. */
-+ *feedback = ((target / 1000) * *in_div) / (jz_clk_ext.rate / 1000);
-+}
-+
-+static unsigned long jz_clk_pll_round_rate(struct clk *clk, unsigned long rate)
-+{
-+ unsigned int in_div, feedback, out_div;
-+ /* The PLL frequency must be a multiple of 24 MHz, since the LCD pixel
-+ * clock must be exactly 12 MHz for the TV-out to work.
-+ * TODO: A multiple of 12 MHz for the PLL would work if the PLL would
-+ * not be divided by 2 before being passed to the set of derived
-+ * clocks that includes the LCD pixel clock.
-+ * TODO: Systemwide decisions like this should be made by the board
-+ * support code, so add some kind of hook for that.
-+ */
-+ unsigned long rate24 = (rate / 24000000) * 24000000;
-+
-+ jz_clk_pll_calc_dividers(rate24, &in_div, &feedback, &out_div);
-+ return jz_clk_pll_calc_rate(in_div, feedback, out_div);
-+}
-+
- static const int pllno[] = {1, 2, 2, 4};
-
- static unsigned long jz_clk_pll_get_rate(struct clk *clk)
- {
- uint32_t val;
-- int m;
-- int n;
-- int od;
-+ unsigned int in_div, feedback, out_div;
-
- val = jz_clk_reg_read(JZ_REG_CLOCK_PLL);
-
- if (val & JZ_CLOCK_PLL_BYPASS)
- return clk_get_rate(clk->parent);
-
-- m = ((val >> 23) & 0x1ff) + 2;
-- n = ((val >> 18) & 0x1f) + 2;
-- od = (val >> 16) & 0x3;
-+ feedback = ((val >> 23) & 0x1ff) + 2;
-+ in_div = ((val >> 18) & 0x1f) + 2;
-+ out_div = pllno[(val >> 16) & 0x3];
-
-- return ((clk_get_rate(clk->parent) / n) * m) / pllno[od];
-+ return jz_clk_pll_calc_rate(in_div, feedback, out_div);
- }
-
- static unsigned long jz_clk_pll_half_get_rate(struct clk *clk)
-@@ -235,7 +311,77 @@ static unsigned long jz_clk_pll_half_get
- return jz_clk_pll_get_rate(clk->parent) >> 1;
- }
-
--static const int jz_clk_main_divs[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
-+#define SDRAM_TREF 15625 /* Refresh period: 4096 refresh cycles/64ms */
-+
-+static void sdram_set_pll(unsigned int pllin)
-+{
-+ unsigned int ns, sdramclock;
-+
-+ ns = 1000000000 / pllin;
-+ sdramclock = (SDRAM_TREF / ns) / 64 + 1;
-+ if (sdramclock > 0xff) sdramclock = 0xff;
-+ /* Set refresh registers */
-+ writew(sdramclock, jz_emc_base + JZ_REG_EMC_RTCOR);
-+ writew(sdramclock, jz_emc_base + JZ_REG_EMC_RTCNT);
-+}
-+
-+static int jz_clk_pll_set_rate(struct clk *clk, unsigned long rate)
-+{
-+ unsigned int ctrl, plcr1;
-+ unsigned int feedback, in_div, out_div, pllout, pllout2;
-+
-+ jz_clk_pll_calc_dividers(rate, &in_div, &feedback, &out_div);
-+
-+ ctrl = jz_clk_reg_read(JZ_REG_CLOCK_CTRL);
-+ pllout = jz_clk_pll_calc_rate(in_div, feedback, out_div);
-+ pllout2 = (ctrl & JZ_CLOCK_CTRL_PLL_HALF) ? pllout : (pllout / 2);
-+
-+ /* Init UHC clock */
-+ writel(pllout2 / 48000000 - 1, jz_clock_base + JZ_REG_CLOCK_UHC);
-+
-+ plcr1 = ((feedback - 2) << JZ_CLOCK_PLL_M_OFFSET) |
-+ ((in_div - 2) << JZ_CLOCK_PLL_N_OFFSET) |
-+ ((out_div - 1) << JZ_CLOCK_PLL_OD_OFFSET) |
-+ (0x20 << JZ_CLOCK_PLL_STABILIZE_OFFSET) |
-+ JZ_CLOCK_PLL_ENABLED;
-+
-+ sdram_set_pll(pllout);
-+
-+ /* LCD pixclock */
-+ writel(pllout2 / 12000000 - 1, jz_clock_base + JZ_REG_CLOCK_LCD);
-+
-+ /* configure PLL */
-+ __asm__ __volatile__(
-+ ".set noreorder\n\t"
-+ ".align 5\n"
-+ "sw %1,0(%0)\n\t"
-+ "nop\n\t"
-+ "nop\n\t"
-+ "nop\n\t"
-+ "nop\n\t"
-+ "nop\n\t"
-+ "nop\n\t"
-+ "nop\n\t"
-+ ".set reorder\n\t"
-+ :
-+ : "r" (jz_clock_base + JZ_REG_CLOCK_PLL), "r" (plcr1));
-+
-+ /* MtH: For some reason the MSC will have problems if this flag is not
-+ restored, even though the MSC is supposedly the only divider
-+ that is not affected by this flag. */
-+ jz_clk_reg_set_bits(JZ_REG_CLOCK_CTRL, JZ_CLOCK_CTRL_CHANGE_ENABLE);
-+
-+ return 0;
-+}
-+
-+static const unsigned int jz_clk_main_divs[] = {
-+ 1, 2, 3, 4, 6, 8, 12, 16, 24, 32
-+};
-+static const unsigned int jz_clk_main_divs_inv[] = {
-+ -1, 0, 1, 2, 3, -1, 4, -1, 5, -1, -1, -1, 6, -1, -1, -1,
-+ 7, -1, -1, -1, -1, -1, -1, -1, 8, -1, -1, -1, -1, -1, -1, -1,
-+ 9
-+};
-
- static unsigned long jz_clk_main_round_rate(struct clk *clk, unsigned long rate)
- {
-@@ -290,6 +436,64 @@ static int jz_clk_main_set_rate(struct c
- return 0;
- }
-
-+static struct main_clk jz_clk_cpu;
-+
-+int clk_main_set_dividers(bool immediate, unsigned int cdiv, unsigned int hdiv,
-+ unsigned int mdiv, unsigned int pdiv)
-+{
-+ unsigned int cdiv_enc, hdiv_enc, mdiv_enc, pdiv_enc;
-+ unsigned int ctrl;
-+ unsigned int tmp, wait;
-+
-+ if (cdiv >= ARRAY_SIZE(jz_clk_main_divs_inv) ||
-+ hdiv >= ARRAY_SIZE(jz_clk_main_divs_inv) ||
-+ mdiv >= ARRAY_SIZE(jz_clk_main_divs_inv) ||
-+ pdiv >= ARRAY_SIZE(jz_clk_main_divs_inv))
-+ return -EINVAL;
-+ cdiv_enc = jz_clk_main_divs_inv[cdiv];
-+ hdiv_enc = jz_clk_main_divs_inv[hdiv];
-+ mdiv_enc = jz_clk_main_divs_inv[mdiv];
-+ pdiv_enc = jz_clk_main_divs_inv[pdiv];
-+ if (cdiv_enc == (unsigned int)-1 ||
-+ hdiv_enc == (unsigned int)-1 ||
-+ mdiv_enc == (unsigned int)-1 ||
-+ pdiv_enc == (unsigned int)-1)
-+ return -EINVAL;
-+
-+ ctrl = jz_clk_reg_read(JZ_REG_CLOCK_CTRL);
-+ ctrl &= ~(JZ_CLOCK_CTRL_CHANGE_ENABLE |
-+ JZ_CLOCK_CTRL_CDIV_MASK | JZ_CLOCK_CTRL_HDIV_MASK |
-+ JZ_CLOCK_CTRL_MDIV_MASK | JZ_CLOCK_CTRL_PDIV_MASK);
-+ if (immediate) ctrl |= JZ_CLOCK_CTRL_CHANGE_ENABLE;
-+ ctrl |= (cdiv_enc << JZ_CLOCK_CTRL_CDIV_OFFSET) |
-+ (hdiv_enc << JZ_CLOCK_CTRL_HDIV_OFFSET) |
-+ (mdiv_enc << JZ_CLOCK_CTRL_MDIV_OFFSET) |
-+ (pdiv_enc << JZ_CLOCK_CTRL_PDIV_OFFSET);
-+
-+ /* set dividers */
-+ /* delay loops lifted from the old Ingenic cpufreq driver */
-+ wait = ((clk_get_rate(&jz_clk_cpu.clk) / 1000000) * 500) / 1000;
-+ __asm__ __volatile__(
-+ ".set noreorder\n\t"
-+ ".align 5\n"
-+ "sw %2,0(%1)\n\t"
-+ "li %0,0\n\t"
-+ "1:\n\t"
-+ "bne %0,%3,1b\n\t"
-+ "addi %0, 1\n\t"
-+ "nop\n\t"
-+ "nop\n\t"
-+ "nop\n\t"
-+ "nop\n\t"
-+ ".set reorder\n\t"
-+ : "=r" (tmp)
-+ : "r" (jz_clock_base + JZ_REG_CLOCK_CTRL), "r" (ctrl),
-+ "r" (wait));
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL_GPL(clk_main_set_dividers);
-+
- static struct clk_ops jz_clk_static_ops = {
- .get_rate = jz_clk_static_get_rate,
- .enable = jz_clk_enable_gating,
-@@ -307,6 +511,8 @@ static struct static_clk jz_clk_ext = {
-
- static struct clk_ops jz_clk_pll_ops = {
- .get_rate = jz_clk_pll_get_rate,
-+ .set_rate = jz_clk_pll_set_rate,
-+ .round_rate = jz_clk_pll_round_rate,
- };
-
- static struct clk jz_clk_pll = {
-@@ -897,6 +1103,10 @@ static int jz4740_clock_init(void)
- if (!jz_clock_base)
- return -EBUSY;
-
-+ jz_emc_base = ioremap(JZ4740_EMC_BASE_ADDR, 0x100);
-+ if (!jz_emc_base)
-+ return -EBUSY;
-+
- spin_lock_init(&jz_clock_lock);
-
- jz_clk_ext.rate = jz4740_clock_bdata.ext_rate;
---- a/arch/mips/jz4740/clock.h
-+++ b/arch/mips/jz4740/clock.h
-@@ -17,6 +17,7 @@
- #define __MIPS_JZ4740_CLOCK_H__
-
- #include <linux/list.h>
-+#include <linux/types.h>
-
- struct jz4740_clock_board_data {
- unsigned long ext_rate;
-@@ -63,6 +64,9 @@ struct clk {
-
- int clk_is_enabled(struct clk *clk);
-
-+int clk_main_set_dividers(bool immediate, unsigned int cdiv, unsigned int hdiv,
-+ unsigned int mdiv, unsigned int pdiv);
-+
- #ifdef CONFIG_DEBUG_FS
- void jz4740_clock_debugfs_init(void);
- void jz4740_clock_debugfs_add_clk(struct clk *clk);
diff --git a/target/linux/xburst/patches-3.3/0012-MIPS-JZ4740-Add-cpufreq-support.patch b/target/linux/xburst/patches-3.3/0012-MIPS-JZ4740-Add-cpufreq-support.patch
deleted file mode 100644
index c0e3bab74d..0000000000
--- a/target/linux/xburst/patches-3.3/0012-MIPS-JZ4740-Add-cpufreq-support.patch
+++ /dev/null
@@ -1,298 +0,0 @@
-From d0f0d5739a31c12d349980ed05a670fa1e84696d Mon Sep 17 00:00:00 2001
-From: Maarten ter Huurne <maarten@treewalker.org>
-Date: Wed, 16 Mar 2011 03:16:04 +0100
-Subject: [PATCH 12/21] MIPS: JZ4740: Add cpufreq support.
-
-This is a squashed version of Uli's driver that was further developed in the opendingux-kernel repository.
----
- arch/mips/Kconfig | 1 +
- arch/mips/jz4740/Makefile | 1 +
- arch/mips/jz4740/cpufreq.c | 226 ++++++++++++++++++++++++++++++++++++++
- arch/mips/kernel/cpufreq/Kconfig | 13 ++-
- 4 files changed, 240 insertions(+), 1 deletions(-)
- create mode 100644 arch/mips/jz4740/cpufreq.c
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -212,6 +212,7 @@ config MACH_JZ4740
- select HAVE_PWM
- select HAVE_CLK
- select GENERIC_IRQ_CHIP
-+ select CPU_SUPPORTS_CPUFREQ
-
- config LANTIQ
- bool "Lantiq based platforms"
---- a/arch/mips/jz4740/Makefile
-+++ b/arch/mips/jz4740/Makefile
-@@ -16,5 +16,6 @@ obj-$(CONFIG_JZ4740_QI_LB60) += board-qi
- # PM support
-
- obj-$(CONFIG_PM) += pm.o
-+obj-$(CONFIG_CPU_FREQ_JZ) += cpufreq.o
-
- ccflags-y := -Werror -Wall
---- /dev/null
-+++ b/arch/mips/jz4740/cpufreq.c
-@@ -0,0 +1,226 @@
-+/*
-+ * linux/arch/mips/jz4740/cpufreq.c
-+ *
-+ * cpufreq driver for JZ4740
-+ *
-+ * Copyright (c) 2010 Ulrich Hecht <ulrich.hecht@gmail.com>
-+ * Copyright (c) 2010 Maarten ter Huurne <maarten@treewalker.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/err.h>
-+
-+#include <linux/cpufreq.h>
-+
-+#include <linux/clk.h>
-+#include <asm/mach-jz4740/base.h>
-+
-+#include "clock.h"
-+
-+#define DEBUG_CPUFREQ
-+
-+#ifdef DEBUG_CPUFREQ
-+#define dprintk(X...) printk(KERN_INFO X)
-+#else
-+#define dprintk(X...) do { } while(0)
-+#endif
-+
-+#define HCLK_MIN 30000
-+/* TODO: The maximum MCLK most likely depends on the SDRAM chips used,
-+ so it is board-specific. */
-+#define MCLK_MAX 140000
-+
-+/* Same as jz_clk_main_divs, but with 24 and 32 removed because the hardware
-+ spec states those dividers must not be used for CCLK or HCLK. */
-+static const unsigned int jz4740_freq_cpu_divs[] = {1, 2, 3, 4, 6, 8, 12, 16};
-+
-+struct jz4740_freq_percpu_info {
-+ unsigned int pll_rate;
-+ struct cpufreq_frequency_table table[
-+ ARRAY_SIZE(jz4740_freq_cpu_divs) + 1];
-+};
-+
-+static struct clk *pll;
-+static struct clk *cclk;
-+
-+static struct jz4740_freq_percpu_info jz4740_freq_info;
-+
-+static struct cpufreq_driver cpufreq_jz4740_driver;
-+
-+static void jz4740_freq_fill_table(struct cpufreq_policy *policy,
-+ unsigned int pll_rate)
-+{
-+ struct cpufreq_frequency_table *table = &jz4740_freq_info.table[0];
-+ int i;
-+
-+#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
-+ /* for showing /sys/devices/system/cpu/cpuX/cpufreq/stats/ */
-+ static bool init = false;
-+ if (init)
-+ cpufreq_frequency_table_put_attr(policy->cpu);
-+ else
-+ init = true;
-+#endif
-+
-+ jz4740_freq_info.pll_rate = pll_rate;
-+
-+ for (i = 0; i < ARRAY_SIZE(jz4740_freq_cpu_divs); i++) {
-+ unsigned int freq = pll_rate / jz4740_freq_cpu_divs[i];
-+ if (freq < HCLK_MIN) break;
-+ table[i].index = i;
-+ table[i].frequency = freq;
-+ }
-+ table[i].index = i;
-+ table[i].frequency = CPUFREQ_TABLE_END;
-+
-+ policy->min = table[i - 1].frequency;
-+ policy->max = table[0].frequency;
-+
-+#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
-+ cpufreq_frequency_table_get_attr(table, policy->cpu);
-+#endif
-+}
-+
-+static unsigned int jz4740_freq_get(unsigned int cpu)
-+{
-+ return clk_get_rate(cclk) / 1000;
-+}
-+
-+static int jz4740_freq_verify(struct cpufreq_policy *policy)
-+{
-+ unsigned int new_pll;
-+
-+ cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
-+ policy->cpuinfo.max_freq);
-+
-+ new_pll = clk_round_rate(pll, policy->max * 1000) / 1000;
-+ if (jz4740_freq_info.pll_rate != new_pll)
-+ jz4740_freq_fill_table(policy, new_pll);
-+
-+ return 0;
-+}
-+
-+static int jz4740_freq_target(struct cpufreq_policy *policy,
-+ unsigned int target_freq,
-+ unsigned int relation)
-+{
-+ struct cpufreq_frequency_table *table = &jz4740_freq_info.table[0];
-+ struct cpufreq_freqs freqs;
-+ unsigned int new_index = 0;
-+ unsigned int old_pll = clk_get_rate(pll) / 1000;
-+ unsigned int new_pll = jz4740_freq_info.pll_rate;
-+ int ret = 0;
-+
-+ if (cpufreq_frequency_table_target(policy, table,
-+ target_freq, relation, &new_index))
-+ return -EINVAL;
-+ freqs = (struct cpufreq_freqs) {
-+ .old = jz4740_freq_get(policy->cpu),
-+ .new = table[new_index].frequency,
-+ .cpu = policy->cpu,
-+ .flags = cpufreq_jz4740_driver.flags,
-+ };
-+ if (freqs.new != freqs.old || new_pll != old_pll) {
-+ unsigned int cdiv, hdiv, mdiv, pdiv;
-+ cdiv = jz4740_freq_cpu_divs[new_index];
-+ hdiv = (cdiv == 3 || cdiv == 6) ? cdiv * 2 : cdiv * 3;
-+ while (new_pll < HCLK_MIN * hdiv)
-+ hdiv -= cdiv;
-+ mdiv = hdiv;
-+ if (new_pll > MCLK_MAX * mdiv) {
-+ /* 4,4 performs better than 3,6 */
-+ if (new_pll > MCLK_MAX * 4)
-+ mdiv *= 2;
-+ else
-+ hdiv = mdiv = cdiv * 4;
-+ }
-+ pdiv = mdiv;
-+ dprintk(KERN_INFO "%s: cclk %p, setting from %d to %d, "
-+ "dividers %d, %d, %d, %d\n",
-+ __FUNCTION__, cclk, freqs.old, freqs.new,
-+ cdiv, hdiv, mdiv, pdiv);
-+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-+ ret = clk_main_set_dividers(new_pll == old_pll,
-+ cdiv, hdiv, mdiv, pdiv);
-+ if (ret) {
-+ dprintk(KERN_INFO "failed to set dividers\n");
-+ } else if (new_pll != old_pll) {
-+ dprintk(KERN_INFO "%s: pll %p, setting from %d to %d\n",
-+ __FUNCTION__, pll, old_pll, new_pll);
-+ ret = clk_set_rate(pll, new_pll * 1000);
-+ }
-+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-+ }
-+
-+ return ret;
-+}
-+
-+static int jz4740_cpufreq_driver_init(struct cpufreq_policy *policy)
-+{
-+ int ret;
-+
-+ dprintk(KERN_INFO "Jz4740 cpufreq driver\n");
-+
-+ if (policy->cpu != 0)
-+ return -EINVAL;
-+
-+ pll = clk_get(NULL, "pll");
-+ if (IS_ERR(pll)) {
-+ ret = PTR_ERR(pll);
-+ goto err_exit;
-+ }
-+
-+ cclk = clk_get(NULL, "cclk");
-+ if (IS_ERR(cclk)) {
-+ ret = PTR_ERR(cclk);
-+ goto err_clk_put_pll;
-+ }
-+
-+ policy->cpuinfo.min_freq = HCLK_MIN;
-+ policy->cpuinfo.max_freq = 500000;
-+ policy->cpuinfo.transition_latency = 100000; /* in nanoseconds */
-+ policy->cur = jz4740_freq_get(policy->cpu);
-+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-+ /* min and max are set by jz4740_freq_fill_table() */
-+
-+ jz4740_freq_fill_table(policy, clk_get_rate(pll) / 1000 /* in kHz */);
-+
-+ return 0;
-+
-+err_clk_put_pll:
-+ clk_put(pll);
-+err_exit:
-+ return ret;
-+}
-+
-+static struct cpufreq_driver cpufreq_jz4740_driver = {
-+ .init = jz4740_cpufreq_driver_init,
-+ .verify = jz4740_freq_verify,
-+ .target = jz4740_freq_target,
-+ .get = jz4740_freq_get,
-+ .name = "jz4740",
-+};
-+
-+static int __init jz4740_cpufreq_init(void)
-+{
-+ return cpufreq_register_driver(&cpufreq_jz4740_driver);
-+}
-+
-+static void __exit jz4740_cpufreq_exit(void)
-+{
-+ cpufreq_unregister_driver(&cpufreq_jz4740_driver);
-+}
-+
-+module_init(jz4740_cpufreq_init);
-+module_exit(jz4740_cpufreq_exit);
-+
-+MODULE_AUTHOR("Ulrich Hecht <ulrich.hecht@gmail.com>, "
-+ "Maarten ter Huurne <maarten@treewalker.org>");
-+MODULE_DESCRIPTION("cpufreq driver for Jz4740");
-+MODULE_LICENSE("GPL");
---- a/arch/mips/kernel/cpufreq/Kconfig
-+++ b/arch/mips/kernel/cpufreq/Kconfig
-@@ -8,7 +8,7 @@ config MIPS_EXTERNAL_TIMER
- config MIPS_CPUFREQ
- bool
- default y
-- depends on CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
-+ depends on CPU_SUPPORTS_CPUFREQ
-
- if MIPS_CPUFREQ
-
-@@ -24,6 +24,7 @@ config LOONGSON2_CPUFREQ
- tristate "Loongson2 CPUFreq Driver"
- select CPU_FREQ_TABLE
- depends on MIPS_CPUFREQ
-+ depends on MIPS_EXTERNAL_TIMER
- help
- This option adds a CPUFreq driver for loongson processors which
- support software configurable cpu frequency.
-@@ -34,6 +35,16 @@ config LOONGSON2_CPUFREQ
-
- If in doubt, say N.
-
-+config CPU_FREQ_JZ
-+ tristate "CPUfreq driver for JZ CPUs"
-+ select CPU_FREQ_TABLE
-+ depends on MACH_JZ4740
-+ default n
-+ help
-+ This enables the CPUfreq driver for JZ CPUs.
-+
-+ If in doubt, say N.
-+
- endif # CPU_FREQ
-
- endmenu
diff --git a/target/linux/xburst/patches-3.3/0013-MMC-JZ4740-Added-support-for-CPU-frequency-changing.patch b/target/linux/xburst/patches-3.3/0013-MMC-JZ4740-Added-support-for-CPU-frequency-changing.patch
deleted file mode 100644
index f42d67a6fa..0000000000
--- a/target/linux/xburst/patches-3.3/0013-MMC-JZ4740-Added-support-for-CPU-frequency-changing.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-From b95144c1b702f98c7902c75beb83f323701eb7c5 Mon Sep 17 00:00:00 2001
-From: Maarten ter Huurne <maarten@treewalker.org>
-Date: Sun, 19 Jun 2011 10:57:18 +0200
-Subject: [PATCH 13/21] MMC: JZ4740: Added support for CPU frequency changing.
-
-The MSC device clock is stopped before the frequency change.
-After the change a new divider is computed and the clock is restarted.
-Also the frequency change is postponed if an I/O operation is in progress.
----
- drivers/mmc/host/jz4740_mmc.c | 69 +++++++++++++++++++++++++++++++++++++++-
- 1 files changed, 67 insertions(+), 2 deletions(-)
-
---- a/drivers/mmc/host/jz4740_mmc.c
-+++ b/drivers/mmc/host/jz4740_mmc.c
-@@ -23,6 +23,7 @@
- #include <linux/delay.h>
- #include <linux/scatterlist.h>
- #include <linux/clk.h>
-+#include <linux/cpufreq.h>
-
- #include <linux/bitops.h>
- #include <linux/gpio.h>
-@@ -685,6 +686,60 @@ static void jz4740_mmc_enable_sdio_irq(s
- jz4740_mmc_set_irq_enabled(host, JZ_MMC_IRQ_SDIO, enable);
- }
-
-+#ifdef CONFIG_CPU_FREQ
-+
-+static struct jz4740_mmc_host *cpufreq_host;
-+
-+static int jz4740_mmc_cpufreq_transition(struct notifier_block *nb,
-+ unsigned long val, void *data)
-+{
-+ /* TODO: We only have to take action when the PLL freq changes:
-+ the main dividers have no influence on the MSC device clock. */
-+
-+ if (val == CPUFREQ_PRECHANGE) {
-+ mmc_claim_host(cpufreq_host->mmc);
-+ clk_disable(cpufreq_host->clk);
-+ } else if (val == CPUFREQ_POSTCHANGE) {
-+ struct mmc_ios *ios = &cpufreq_host->mmc->ios;
-+ if (ios->clock)
-+ jz4740_mmc_set_clock_rate(cpufreq_host, ios->clock);
-+ if (ios->power_mode != MMC_POWER_OFF)
-+ clk_enable(cpufreq_host->clk);
-+ mmc_release_host(cpufreq_host->mmc);
-+ }
-+ return 0;
-+}
-+
-+static struct notifier_block jz4740_mmc_cpufreq_nb = {
-+ .notifier_call = jz4740_mmc_cpufreq_transition,
-+};
-+
-+static inline int jz4740_mmc_cpufreq_register(struct jz4740_mmc_host *host)
-+{
-+ cpufreq_host = host;
-+ return cpufreq_register_notifier(&jz4740_mmc_cpufreq_nb,
-+ CPUFREQ_TRANSITION_NOTIFIER);
-+}
-+
-+static inline void jz4740_mmc_cpufreq_unregister(void)
-+{
-+ cpufreq_unregister_notifier(&jz4740_mmc_cpufreq_nb,
-+ CPUFREQ_TRANSITION_NOTIFIER);
-+}
-+
-+#else
-+
-+static inline int jz4740_mmc_cpufreq_register(struct jz4740_mmc_host *host)
-+{
-+ return 0;
-+}
-+
-+static inline void jz4740_mmc_cpufreq_unregister(void)
-+{
-+}
-+
-+#endif
-+
- static const struct mmc_host_ops jz4740_mmc_ops = {
- .request = jz4740_mmc_request,
- .set_ios = jz4740_mmc_set_ios,
-@@ -834,11 +889,18 @@ static int __devinit jz4740_mmc_probe(st
- goto err_free_host;
- }
-
-+ ret = jz4740_mmc_cpufreq_register(host);
-+ if (ret) {
-+ dev_err(&pdev->dev,
-+ "Failed to register cpufreq transition notifier\n");
-+ goto err_clk_put;
-+ }
-+
- host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!host->mem) {
- ret = -ENOENT;
- dev_err(&pdev->dev, "Failed to get base platform memory\n");
-- goto err_clk_put;
-+ goto err_cpufreq_unreg;
- }
-
- host->mem = request_mem_region(host->mem->start,
-@@ -846,7 +908,7 @@ static int __devinit jz4740_mmc_probe(st
- if (!host->mem) {
- ret = -EBUSY;
- dev_err(&pdev->dev, "Failed to request base memory region\n");
-- goto err_clk_put;
-+ goto err_cpufreq_unreg;
- }
-
- host->base = ioremap_nocache(host->mem->start, resource_size(host->mem));
-@@ -929,6 +991,8 @@ err_iounmap:
- iounmap(host->base);
- err_release_mem_region:
- release_mem_region(host->mem->start, resource_size(host->mem));
-+err_cpufreq_unreg:
-+ jz4740_mmc_cpufreq_unregister();
- err_clk_put:
- clk_put(host->clk);
- err_free_host:
-@@ -958,6 +1022,7 @@ static int __devexit jz4740_mmc_remove(s
- iounmap(host->base);
- release_mem_region(host->mem->start, resource_size(host->mem));
-
-+ jz4740_mmc_cpufreq_unregister();
- clk_put(host->clk);
-
- platform_set_drvdata(pdev, NULL);
diff --git a/target/linux/xburst/patches-3.3/0014-MIPS-JZ4740-reset-Initialize-hibernate-wakeup-counte.patch b/target/linux/xburst/patches-3.3/0014-MIPS-JZ4740-reset-Initialize-hibernate-wakeup-counte.patch
deleted file mode 100644
index b4e484321f..0000000000
--- a/target/linux/xburst/patches-3.3/0014-MIPS-JZ4740-reset-Initialize-hibernate-wakeup-counte.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From 2dcb0ca66d0bffc23d5f001fad81fb1a7a2c371b Mon Sep 17 00:00:00 2001
-From: Maarten ter Huurne <maarten@treewalker.org>
-Date: Tue, 28 Jun 2011 22:28:59 +0200
-Subject: [PATCH 14/21] MIPS: JZ4740: reset: Initialize hibernate wakeup
- counters.
-
-In hibernation mode only the wakeup logic and the RTC are left running,
-so this is what users perceive as power down.
-
-If the counters are not initialized, the corresponding pin (typically
-connected to the power button) has to be asserted for two seconds
-before the device wakes up. Most users expect a shorter wakeup time.
-
-I took the timing values of 100 ms and 60 ms from BouKiCHi's patch for
-the Dingoo A320 kernel.
----
- arch/mips/jz4740/reset.c | 46 ++++++++++++++++++++++++++++++++++++++++------
- 1 files changed, 40 insertions(+), 6 deletions(-)
-
---- a/arch/mips/jz4740/reset.c
-+++ b/arch/mips/jz4740/reset.c
-@@ -21,6 +21,9 @@
- #include <asm/mach-jz4740/base.h>
- #include <asm/mach-jz4740/timer.h>
-
-+#include "reset.h"
-+#include "clock.h"
-+
- static void jz4740_halt(void)
- {
- while (1) {
-@@ -53,21 +56,52 @@ static void jz4740_restart(char *command
- jz4740_halt();
- }
-
--#define JZ_REG_RTC_CTRL 0x00
--#define JZ_REG_RTC_HIBERNATE 0x20
--
--#define JZ_RTC_CTRL_WRDY BIT(7)
-+#define JZ_REG_RTC_CTRL 0x00
-+#define JZ_REG_RTC_HIBERNATE 0x20
-+#define JZ_REG_RTC_WAKEUP_FILTER 0x24
-+#define JZ_REG_RTC_RESET_COUNTER 0x28
-+
-+#define JZ_RTC_CTRL_WRDY BIT(7)
-+#define JZ_RTC_WAKEUP_FILTER_MASK 0x0000FFE0
-+#define JZ_RTC_RESET_COUNTER_MASK 0x00000FE0
-
--static void jz4740_power_off(void)
-+static inline void jz4740_rtc_wait_ready(void __iomem *rtc_base)
- {
-- void __iomem *rtc_base = ioremap(JZ4740_RTC_BASE_ADDR, 0x24);
- uint32_t ctrl;
--
- do {
- ctrl = readl(rtc_base + JZ_REG_RTC_CTRL);
- } while (!(ctrl & JZ_RTC_CTRL_WRDY));
-+}
-
-+static void jz4740_power_off(void)
-+{
-+ void __iomem *rtc_base = ioremap(JZ4740_RTC_BASE_ADDR, 0x38);
-+ unsigned long long wakeup_filter_ticks;
-+ unsigned long long reset_counter_ticks;
-+
-+ /* Set minimum wakeup pin assertion time: 100 ms.
-+ Range is 0 to 2 sec if RTC is clocked at 32 kHz. */
-+ wakeup_filter_ticks = (100 * jz4740_clock_bdata.rtc_rate) / 1000;
-+ if (wakeup_filter_ticks < JZ_RTC_WAKEUP_FILTER_MASK)
-+ wakeup_filter_ticks &= JZ_RTC_WAKEUP_FILTER_MASK;
-+ else
-+ wakeup_filter_ticks = JZ_RTC_WAKEUP_FILTER_MASK;
-+ jz4740_rtc_wait_ready(rtc_base);
-+ writel(wakeup_filter_ticks, rtc_base + JZ_REG_RTC_WAKEUP_FILTER);
-+
-+ /* Set reset pin low-level assertion time after wakeup: 60 ms.
-+ Range is 0 to 125 ms if RTC is clocked at 32 kHz. */
-+ reset_counter_ticks = (60 * jz4740_clock_bdata.rtc_rate) / 1000;
-+ if (reset_counter_ticks < JZ_RTC_RESET_COUNTER_MASK)
-+ reset_counter_ticks &= JZ_RTC_RESET_COUNTER_MASK;
-+ else
-+ reset_counter_ticks = JZ_RTC_RESET_COUNTER_MASK;
-+ jz4740_rtc_wait_ready(rtc_base);
-+ writel(reset_counter_ticks, rtc_base + JZ_REG_RTC_RESET_COUNTER);
-+
-+ jz4740_rtc_wait_ready(rtc_base);
- writel(1, rtc_base + JZ_REG_RTC_HIBERNATE);
-+
- jz4740_halt();
- }
-
diff --git a/target/linux/xburst/patches-3.3/0015-ASoC-JZ4740-Replaced-comma-operators-with-semicolons.patch b/target/linux/xburst/patches-3.3/0015-ASoC-JZ4740-Replaced-comma-operators-with-semicolons.patch
deleted file mode 100644
index 9e812e1ca6..0000000000
--- a/target/linux/xburst/patches-3.3/0015-ASoC-JZ4740-Replaced-comma-operators-with-semicolons.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 515f8006c03e1065bf98c9148a9ea787e2d120d3 Mon Sep 17 00:00:00 2001
-From: Maarten ter Huurne <maarten@treewalker.org>
-Date: Wed, 10 Aug 2011 00:20:16 +0200
-Subject: [PATCH 15/21] ASoC: JZ4740: Replaced comma operators with
- semicolons.
-
-They were harmless but also unnecessary, probably a leftover from earlier code.
----
- sound/soc/jz4740/jz4740-i2s.c | 4 ++--
- 1 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/sound/soc/jz4740/jz4740-i2s.c
-+++ b/sound/soc/jz4740/jz4740-i2s.c
-@@ -346,7 +346,7 @@ static void jz4740_i2c_init_pcm_config(s
-
- /* Playback */
- dma_config = &i2s->pcm_config_playback.dma_config;
-- dma_config->src_width = JZ4740_DMA_WIDTH_32BIT,
-+ dma_config->src_width = JZ4740_DMA_WIDTH_32BIT;
- dma_config->transfer_size = JZ4740_DMA_TRANSFER_SIZE_16BYTE;
- dma_config->request_type = JZ4740_DMA_TYPE_AIC_TRANSMIT;
- dma_config->flags = JZ4740_DMA_SRC_AUTOINC;
-@@ -355,7 +355,7 @@ static void jz4740_i2c_init_pcm_config(s
-
- /* Capture */
- dma_config = &i2s->pcm_config_capture.dma_config;
-- dma_config->dst_width = JZ4740_DMA_WIDTH_32BIT,
-+ dma_config->dst_width = JZ4740_DMA_WIDTH_32BIT;
- dma_config->transfer_size = JZ4740_DMA_TRANSFER_SIZE_16BYTE;
- dma_config->request_type = JZ4740_DMA_TYPE_AIC_RECEIVE;
- dma_config->flags = JZ4740_DMA_DST_AUTOINC;
diff --git a/target/linux/xburst/patches-3.3/0016-ASoC-JZ4740-Support-buffer-size-that-is-not-a-multip.patch b/target/linux/xburst/patches-3.3/0016-ASoC-JZ4740-Support-buffer-size-that-is-not-a-multip.patch
deleted file mode 100644
index 552f811d6b..0000000000
--- a/target/linux/xburst/patches-3.3/0016-ASoC-JZ4740-Support-buffer-size-that-is-not-a-multip.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From 8a5087fe59e31efb8641e704058328997c3c8ff1 Mon Sep 17 00:00:00 2001
-From: Maarten ter Huurne <maarten@treewalker.org>
-Date: Wed, 10 Aug 2011 00:25:11 +0200
-Subject: [PATCH 16/21] ASoC: JZ4740: Support buffer size that is not a
- multiple of period size.
-
-This fixes glitches triggered by libao, which sets time-based intervals
-instead of byte-based intervals like SDL does.
-
-Thanks to Paul Cercueil for figuring out that the buffer size was causing
-the glitches and to Lars Clausen for helping me write the fix.
----
- sound/soc/jz4740/jz4740-pcm.c | 21 ++++++++++++++++++---
- 1 files changed, 18 insertions(+), 3 deletions(-)
-
---- a/sound/soc/jz4740/jz4740-pcm.c
-+++ b/sound/soc/jz4740/jz4740-pcm.c
-@@ -31,6 +31,7 @@
-
- struct jz4740_runtime_data {
- unsigned long dma_period;
-+ unsigned long dma_period_left;
- dma_addr_t dma_start;
- dma_addr_t dma_pos;
- dma_addr_t dma_end;
-@@ -67,10 +68,13 @@ static void jz4740_pcm_start_transfer(st
- if (prtd->dma_pos == prtd->dma_end)
- prtd->dma_pos = prtd->dma_start;
-
-- if (prtd->dma_pos + prtd->dma_period > prtd->dma_end)
-+ if (prtd->dma_period_left == 0)
-+ prtd->dma_period_left = prtd->dma_period;
-+
-+ if (prtd->dma_pos + prtd->dma_period_left > prtd->dma_end)
- count = prtd->dma_end - prtd->dma_pos;
- else
-- count = prtd->dma_period;
-+ count = prtd->dma_period_left;
-
- jz4740_dma_disable(prtd->dma);
-
-@@ -85,6 +89,7 @@ static void jz4740_pcm_start_transfer(st
- jz4740_dma_set_transfer_count(prtd->dma, count);
-
- prtd->dma_pos += count;
-+ prtd->dma_period_left -= count;
-
- jz4740_dma_enable(prtd->dma);
- }
-@@ -96,7 +101,8 @@ static void jz4740_pcm_dma_transfer_done
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct jz4740_runtime_data *prtd = runtime->private_data;
-
-- snd_pcm_period_elapsed(substream);
-+ if (prtd->dma_period_left == 0)
-+ snd_pcm_period_elapsed(substream);
-
- jz4740_pcm_start_transfer(prtd, substream);
- }
-@@ -133,6 +139,7 @@ static int jz4740_pcm_hw_params(struct s
- runtime->dma_bytes = params_buffer_bytes(params);
-
- prtd->dma_period = params_period_bytes(params);
-+ prtd->dma_period_left = 0;
- prtd->dma_start = runtime->dma_addr;
- prtd->dma_pos = prtd->dma_start;
- prtd->dma_end = prtd->dma_start + runtime->dma_bytes;
-@@ -160,6 +167,7 @@ static int jz4740_pcm_prepare(struct snd
- if (!prtd->dma)
- return -EBUSY;
-
-+ prtd->dma_period_left = 0;
- prtd->dma_pos = prtd->dma_start;
-
- return 0;
-@@ -219,6 +227,13 @@ static int jz4740_pcm_open(struct snd_pc
- if (prtd == NULL)
- return -ENOMEM;
-
-+ /* Force period and buffer size to be a multiple of the DMA transfer
-+ * size, which is 16 bytes. */
-+ snd_pcm_hw_constraint_step(runtime, 0,
-+ SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 16);
-+ snd_pcm_hw_constraint_step(runtime, 0,
-+ SNDRV_PCM_HW_PARAM_BUFFER_BYTES, 16);
-+
- snd_soc_set_runtime_hwparams(substream, &jz4740_pcm_hardware);
-
- runtime->private_data = prtd;
diff --git a/target/linux/xburst/patches-3.3/0017-MIPS-JZ4740-qi_lb60-Look-for-NAND-chip-in-bank-1.patch b/target/linux/xburst/patches-3.3/0017-MIPS-JZ4740-qi_lb60-Look-for-NAND-chip-in-bank-1.patch
deleted file mode 100644
index f6b11540af..0000000000
--- a/target/linux/xburst/patches-3.3/0017-MIPS-JZ4740-qi_lb60-Look-for-NAND-chip-in-bank-1.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From cdb15b56aa9517a8cdbd14724088227514622a1b Mon Sep 17 00:00:00 2001
-From: Maarten ter Huurne <maarten@treewalker.org>
-Date: Wed, 11 Jan 2012 22:36:03 +0100
-Subject: [PATCH 17/21] MIPS: JZ4740: qi_lb60: Look for NAND chip in bank 1.
-
-All NanoNotes have their NAND in bank 1.
-Specifying the bank is required since commit e7ca5a665877a030.
----
- arch/mips/jz4740/board-qi_lb60.c | 1 +
- 1 files changed, 1 insertions(+), 0 deletions(-)
-
---- a/arch/mips/jz4740/board-qi_lb60.c
-+++ b/arch/mips/jz4740/board-qi_lb60.c
-@@ -140,6 +140,7 @@ static void qi_lb60_nand_ident(struct pl
- static struct jz_nand_platform_data qi_lb60_nand_pdata = {
- .ident_callback = qi_lb60_nand_ident,
- .busy_gpio = 94,
-+ .banks = { 1 },
- };
-
- /* Keyboard*/
diff --git a/target/linux/xburst/patches-3.3/0018-ASoC-jz4740-Convert-qi_lb60-to-use-snd_soc_register_.patch b/target/linux/xburst/patches-3.3/0018-ASoC-jz4740-Convert-qi_lb60-to-use-snd_soc_register_.patch
deleted file mode 100644
index e7e617510b..0000000000
--- a/target/linux/xburst/patches-3.3/0018-ASoC-jz4740-Convert-qi_lb60-to-use-snd_soc_register_.patch
+++ /dev/null
@@ -1,121 +0,0 @@
-From 94f2b91d2a42854a8869d54a758bc88757d7f6d9 Mon Sep 17 00:00:00 2001
-From: Axel Lin <axel.lin@gmail.com>
-Date: Fri, 6 Jan 2012 11:30:10 +0800
-Subject: [PATCH 18/21] ASoC: jz4740: Convert qi_lb60 to use
- snd_soc_register_card()
-
-Use snd_soc_register_card() instead of creating a "soc-audio" platform device.
-
-Signed-off-by: Axel Lin <axel.lin@gmail.com>
----
- arch/mips/jz4740/board-qi_lb60.c | 6 ++++
- sound/soc/jz4740/qi_lb60.c | 56 +++++++++++++++++--------------------
- 2 files changed, 32 insertions(+), 30 deletions(-)
-
---- a/arch/mips/jz4740/board-qi_lb60.c
-+++ b/arch/mips/jz4740/board-qi_lb60.c
-@@ -418,6 +418,11 @@ static struct platform_device qi_lb60_ch
- },
- };
-
-+/* audio */
-+static struct platform_device qi_lb60_audio_device = {
-+ .name = "qi-lb60-audio",
-+ .id = -1,
-+};
-
- static struct platform_device *jz_platform_devices[] __initdata = {
- &jz4740_udc_device,
-@@ -434,6 +439,7 @@ static struct platform_device *jz_platfo
- &qi_lb60_gpio_keys,
- &qi_lb60_pwm_beeper,
- &qi_lb60_charger_device,
-+ &qi_lb60_audio_device,
- };
-
- static void __init board_gpio_setup(void)
---- a/sound/soc/jz4740/qi_lb60.c
-+++ b/sound/soc/jz4740/qi_lb60.c
-@@ -91,56 +91,52 @@ static struct snd_soc_card qi_lb60 = {
- .num_dapm_routes = ARRAY_SIZE(qi_lb60_routes),
- };
-
--static struct platform_device *qi_lb60_snd_device;
--
- static const struct gpio qi_lb60_gpios[] = {
- { QI_LB60_SND_GPIO, GPIOF_OUT_INIT_LOW, "SND" },
- { QI_LB60_AMP_GPIO, GPIOF_OUT_INIT_LOW, "AMP" },
- };
-
--static int __init qi_lb60_init(void)
-+static int __devinit qi_lb60_probe(struct platform_device *pdev)
- {
-+ struct snd_soc_card *card = &qi_lb60;
- int ret;
-
-- qi_lb60_snd_device = platform_device_alloc("soc-audio", -1);
--
-- if (!qi_lb60_snd_device)
-- return -ENOMEM;
--
- ret = gpio_request_array(qi_lb60_gpios, ARRAY_SIZE(qi_lb60_gpios));
-- if (ret) {
-- pr_err("qi_lb60 snd: Failed to request gpios: %d\n", ret);
-- goto err_device_put;
-- }
-+ if (ret)
-+ return ret;
-
-- platform_set_drvdata(qi_lb60_snd_device, &qi_lb60);
-+ card->dev = &pdev->dev;
-
-- ret = platform_device_add(qi_lb60_snd_device);
-+ ret = snd_soc_register_card(card);
- if (ret) {
-- pr_err("qi_lb60 snd: Failed to add snd soc device: %d\n", ret);
-- goto err_unset_pdata;
-+ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
-+ ret);
-+ gpio_free_array(qi_lb60_gpios, ARRAY_SIZE(qi_lb60_gpios));
- }
--
-- return 0;
--
--err_unset_pdata:
-- platform_set_drvdata(qi_lb60_snd_device, NULL);
--/*err_gpio_free_array:*/
-- gpio_free_array(qi_lb60_gpios, ARRAY_SIZE(qi_lb60_gpios));
--err_device_put:
-- platform_device_put(qi_lb60_snd_device);
--
- return ret;
- }
--module_init(qi_lb60_init);
-
--static void __exit qi_lb60_exit(void)
-+static int __devexit qi_lb60_remove(struct platform_device *pdev)
- {
-- platform_device_unregister(qi_lb60_snd_device);
-+ struct snd_soc_card *card = platform_get_drvdata(pdev);
-+
-+ snd_soc_unregister_card(card);
- gpio_free_array(qi_lb60_gpios, ARRAY_SIZE(qi_lb60_gpios));
-+ return 0;
- }
--module_exit(qi_lb60_exit);
-+
-+static struct platform_driver qi_lb60_driver = {
-+ .driver = {
-+ .name = "qi-lb60-audio",
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = qi_lb60_probe,
-+ .remove = __devexit_p(qi_lb60_remove),
-+};
-+
-+module_platform_driver(qi_lb60_driver);
-
- MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
- MODULE_DESCRIPTION("ALSA SoC QI LB60 Audio support");
- MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:qi-lb60-audio");
diff --git a/target/linux/xburst/patches-3.3/0019-Framebuffer-notifier-Call-notifier-callbacks-prior-t.patch b/target/linux/xburst/patches-3.3/0019-Framebuffer-notifier-Call-notifier-callbacks-prior-t.patch
deleted file mode 100644
index 0876174e56..0000000000
--- a/target/linux/xburst/patches-3.3/0019-Framebuffer-notifier-Call-notifier-callbacks-prior-t.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 159c4d81899db05a57bc4a0d55083e484c3d8a43 Mon Sep 17 00:00:00 2001
-From: Lars-Peter Clausen <lars@metafoo.de>
-Date: Sat, 24 Apr 2010 12:23:28 +0200
-Subject: [PATCH 19/21] Framebuffer notifier: Call notifier callbacks prior to
- blanking the screen
-
----
- drivers/video/fbmem.c | 8 ++++++--
- 1 files changed, 6 insertions(+), 2 deletions(-)
-
---- a/drivers/video/fbmem.c
-+++ b/drivers/video/fbmem.c
-@@ -1046,12 +1046,12 @@ fb_set_var(struct fb_info *info, struct
- int
- fb_blank(struct fb_info *info, int blank)
- {
-- int ret = -EINVAL;
-+ int ret = 0;
-
- if (blank > FB_BLANK_POWERDOWN)
- blank = FB_BLANK_POWERDOWN;
-
-- if (info->fbops->fb_blank)
-+ if (info->fbops->fb_blank && blank == FB_BLANK_UNBLANK)
- ret = info->fbops->fb_blank(blank, info);
-
- if (!ret) {
-@@ -1062,6 +1062,10 @@ fb_blank(struct fb_info *info, int blank
- fb_notifier_call_chain(FB_EVENT_BLANK, &event);
- }
-
-+ if (info->fbops->fb_blank && blank != FB_BLANK_UNBLANK)
-+ ret = info->fbops->fb_blank(blank, info);
-+
-+
- return ret;
- }
-
diff --git a/target/linux/xburst/patches-3.3/0020-qi_lb60-NAND-add-data-partition.patch b/target/linux/xburst/patches-3.3/0020-qi_lb60-NAND-add-data-partition.patch
deleted file mode 100644
index 9d45dd8698..0000000000
--- a/target/linux/xburst/patches-3.3/0020-qi_lb60-NAND-add-data-partition.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 1d7ef3445db5aebf48c90b20e18630633623c750 Mon Sep 17 00:00:00 2001
-From: Xiangfu Liu <xiangfu@macbook.(none)>
-Date: Fri, 19 Aug 2011 15:46:52 +0800
-Subject: [PATCH 20/21] qi_lb60: NAND: add data partition
-
----
- arch/mips/jz4740/board-qi_lb60.c | 7 ++++++-
- 1 files changed, 6 insertions(+), 1 deletions(-)
-
---- a/arch/mips/jz4740/board-qi_lb60.c
-+++ b/arch/mips/jz4740/board-qi_lb60.c
-@@ -118,8 +118,13 @@ static struct mtd_partition qi_lb60_part
- {
- .name = "NAND ROOTFS partition",
- .offset = 8 * 0x100000,
-- .size = (504 + 512 + 1024) * 0x100000,
-+ .size = 512 * 0x100000,
- },
-+ {
-+ .name = "NAND DATA partition",
-+ .offset = 520 * 0x100000,
-+ .size = 1528 * 0x100000,
-+ },
- };
-
- static void qi_lb60_nand_ident(struct platform_device *pdev,
diff --git a/target/linux/xburst/patches-3.3/0021-rtc-jz4740-fix-hwclock-give-time-out.patch b/target/linux/xburst/patches-3.3/0021-rtc-jz4740-fix-hwclock-give-time-out.patch
deleted file mode 100644
index b68033d3bc..0000000000
--- a/target/linux/xburst/patches-3.3/0021-rtc-jz4740-fix-hwclock-give-time-out.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From a37ca6eb8cb52d620feff3323a3be4da24f5bee8 Mon Sep 17 00:00:00 2001
-From: Xiangfu <xiangfu@openmobilefree.net>
-Date: Fri, 16 Mar 2012 17:48:45 +0800
-Subject: [PATCH 21/21] rtc: jz4740 fix hwclock give time out
-
----
- drivers/rtc/rtc-jz4740.c | 2 ++
- 1 files changed, 2 insertions(+), 0 deletions(-)
-
---- a/drivers/rtc/rtc-jz4740.c
-+++ b/drivers/rtc/rtc-jz4740.c
-@@ -280,6 +280,8 @@ static int __devinit jz4740_rtc_probe(st
- }
- }
-
-+ jz4740_rtc_ctrl_set_bits(rtc, JZ_RTC_CTRL_1HZ_IRQ, 1);
-+
- return 0;
-
- err_free_irq:
diff --git a/target/linux/xburst/qi_lb60/config-3.3 b/target/linux/xburst/qi_lb60/config-3.3
deleted file mode 100644
index 22c5b3da8f..0000000000
--- a/target/linux/xburst/qi_lb60/config-3.3
+++ /dev/null
@@ -1,33 +0,0 @@
-# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_INPUT_PWM_BEEPER=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_MATRIX=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_ILI8960=y
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_PLATFORM is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_REGMAP_SPI=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER=y
-# CONFIG_SND_SEQUENCER_OSS is not set
-CONFIG_SND_SEQ_DUMMY=y
-# CONFIG_SND_VIRMIDI is not set
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-# CONFIG_USB_FUSB300 is not set
-CONFIG_USB_JZ4740=y