1 files changed, 0 insertions, 424 deletions
diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-qi_lb60.c b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-qi_lb60.c
deleted file mode 100644
index 8004417160..0000000000
--- a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-qi_lb60.c
+++ /dev/null
@@ -1,424 +0,0 @@
-/*
- * linux/arch/mips/jz4740/board-qi_lb60.c
- *
- * QI_LB60 setup routines.
- *
- * Copyright (c) 2009 Qi Hardware inc.,
- * Author: Xiangfu Liu <xiangfu@qi-hardware.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 or later
- * as published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-jz4740/board-qi_lb60.h>
-#include <asm/mach-jz4740/platform.h>
-
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/mtd/jz4740_nand.h>
-#include <linux/jz4740_fb.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/mtd/jz4740_nand.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/power_supply.h>
-#include <linux/power/jz4740-battery.h>
-#include <linux/power/gpio-charger.h>
-#include <linux/mmc/jz4740_mmc.h>
-
-#include "clock.h"
-
-/* NAND */
-static struct nand_ecclayout qi_lb60_ecclayout_1gb = {
-	.eccbytes = 36,
-	.eccpos = {
-		6,  7,  8,  9,  10, 11, 12, 13,
-		14, 15, 16, 17, 18, 19, 20, 21,
-		22, 23, 24, 25, 26, 27, 28, 29,
-		30, 31, 32, 33, 34, 35, 36, 37,
-		38, 39, 40, 41},
-	.oobfree = {
-		{.offset = 2,
-		 .length = 4},
-		{.offset = 42,
-		 .length = 22}}
-};
-
-static struct mtd_partition qi_lb60_partitions_1gb[] = {
-	{ .name = "NAND BOOT partition",
-	  .offset = 0 * 0x100000,
-	  .size = 4 * 0x100000,
- 	},
-	{ .name = "NAND KERNEL partition",
-	  .offset = 4 * 0x100000,
-	  .size = 4 * 0x100000,
- 	},
-	{ .name = "NAND ROOTFS partition",
-	  .offset = 8 * 0x100000,
-	  .size = (504 + 512) * 0x100000,
- 	},
-};
-
-static struct nand_ecclayout qi_lb60_ecclayout_2gb = {
-	.eccbytes = 72,
-	.eccpos = {
-		12, 13, 14, 15, 16, 17, 18, 19,
-		20, 21, 22, 23, 24, 25, 26, 27, 
-		28, 29, 30, 31, 32, 33, 34, 35,
-		36, 37, 38, 39, 40, 41, 42, 43,
-		44, 45, 46, 47, 48, 49, 50, 51, 
-		52, 53, 54, 55, 56, 57, 58, 59, 
-		60, 61, 62, 63, 64, 65, 66, 67, 
-		68, 69, 70, 71, 72, 73, 74, 75, 
-		76, 77, 78, 79, 80, 81, 82, 83},
-	.oobfree = {
- 		{.offset = 2,
-		 .length = 10},
-		{.offset = 84,
-		 .length = 44}}
-};
-
-static struct mtd_partition qi_lb60_partitions_2gb[] = {
-	{ .name = "NAND BOOT partition",
-	  .offset = 0 * 0x100000,
-	  .size = 4 * 0x100000,
- 	},
-	{ .name = "NAND KERNEL partition",
-	  .offset = 4 * 0x100000,
-	  .size = 4 * 0x100000,
- 	},
-	{ .name = "NAND ROOTFS partition",
-	  .offset = 8 * 0x100000,
-	  .size = (504 + 512 + 1024) * 0x100000,
- 	},
-};
-
-static void qi_lb60_nand_ident(struct platform_device *pdev,
-				struct nand_chip *chip, 
-				struct mtd_partition **partitions,
-				int *num_partitions)
-{
-	if (chip->page_shift == 12) {
-		chip->ecc.layout = &qi_lb60_ecclayout_2gb;
-		*partitions = qi_lb60_partitions_2gb;
-		*num_partitions = ARRAY_SIZE(qi_lb60_partitions_2gb);
-	} else {
-		chip->ecc.layout = &qi_lb60_ecclayout_1gb;
-		*partitions = qi_lb60_partitions_1gb;
-		*num_partitions = ARRAY_SIZE(qi_lb60_partitions_1gb);
-	}
-}
-
-static struct jz_nand_platform_data qi_lb60_nand_pdata = {
-	.ident_callback = qi_lb60_nand_ident,
-	.busy_gpio = 94,
-};
-
-/* Keyboard*/
-
-/* #define KEEP_UART_ALIVE
- * don't define this. the keyboard and keyboard both work
- */
-
-#define KEY_QI_QI	KEY_F13
-#define KEY_QI_UPRED	KEY_RIGHTALT
-#define KEY_QI_VOLUP	KEY_VOLUMEUP
-#define KEY_QI_VOLDOWN	KEY_VOLUMEDOWN
-#define KEY_QI_FN	KEY_LEFTCTRL
-
-static const uint32_t qi_lb60_keymap[] = {
-	KEY(0, 0, KEY_F1),	/* S2 */
-	KEY(0, 1, KEY_F2),	/* S3 */
-	KEY(0, 2, KEY_F3),	/* S4 */
-	KEY(0, 3, KEY_F4),	/* S5 */
-	KEY(0, 4, KEY_F5),	/* S6 */
-	KEY(0, 5, KEY_F6),	/* S7 */
-	KEY(0, 6, KEY_F7),	/* S8 */
-
-	KEY(1, 0, KEY_Q),	/* S10 */
-	KEY(1, 1, KEY_W),	/* S11 */
-	KEY(1, 2, KEY_E),	/* S12 */
-	KEY(1, 3, KEY_R),	/* S13 */
-	KEY(1, 4, KEY_T),	/* S14 */
-	KEY(1, 5, KEY_Y),	/* S15 */
-	KEY(1, 6, KEY_U),	/* S16 */
-	KEY(1, 7, KEY_I),	/* S17 */
-	KEY(2, 0, KEY_A),	/* S18 */
-	KEY(2, 1, KEY_S),	/* S19 */
-	KEY(2, 2, KEY_D),	/* S20 */
-	KEY(2, 3, KEY_F),	/* S21 */
-	KEY(2, 4, KEY_G),	/* S22 */
-	KEY(2, 5, KEY_H),	/* S23 */
-	KEY(2, 6, KEY_J),	/* S24 */
-	KEY(2, 7, KEY_K),	/* S25 */
-	KEY(3, 0, KEY_ESC),	/* S26 */
-	KEY(3, 1, KEY_Z),	/* S27 */
-	KEY(3, 2, KEY_X),	/* S28 */
-	KEY(3, 3, KEY_C),	/* S29 */
-	KEY(3, 4, KEY_V),	/* S30 */
-	KEY(3, 5, KEY_B),	/* S31 */
-	KEY(3, 6, KEY_N),	/* S32 */
-	KEY(3, 7, KEY_M),	/* S33 */
-	KEY(4, 0, KEY_TAB),	/* S34 */
-	KEY(4, 1, KEY_CAPSLOCK),	/* S35 */
-	KEY(4, 2, KEY_BACKSLASH),	/* S36 */
-	KEY(4, 3, KEY_APOSTROPHE),	/* S37 */
-	KEY(4, 4, KEY_COMMA),	/* S38 */
-	KEY(4, 5, KEY_DOT),	/* S39 */
-	KEY(4, 6, KEY_SLASH),	/* S40 */
-	KEY(4, 7, KEY_UP),	/* S41 */
-	KEY(5, 0, KEY_O),	/* S42 */
-	KEY(5, 1, KEY_L),	/* S43 */
-	KEY(5, 2, KEY_EQUAL),	/* S44 */
-	KEY(5, 3, KEY_QI_UPRED),	/* S45 */
-	KEY(5, 4, KEY_SPACE),	/* S46 */
-	KEY(5, 5, KEY_QI_QI),	/* S47 */
-	KEY(5, 6, KEY_RIGHTCTRL),	/* S48 */
-	KEY(5, 7, KEY_LEFT),	/* S49 */
-	KEY(6, 0, KEY_F8),	/* S50 */
-	KEY(6, 1, KEY_P),	/* S51 */
-	KEY(6, 2, KEY_BACKSPACE),/* S52 */
-	KEY(6, 3, KEY_ENTER),	/* S53 */
-	KEY(6, 4, KEY_QI_VOLUP),	/* S54 */
-	KEY(6, 5, KEY_QI_VOLDOWN),	/* S55 */
-	KEY(6, 6, KEY_DOWN),	/* S56 */
-	KEY(6, 7, KEY_RIGHT),	/* S57 */
-
-#ifndef KEEP_UART_ALIVE
-	KEY(7, 0, KEY_LEFTSHIFT),	/* S58 */
-	KEY(7, 1, KEY_LEFTALT),	/* S59 */
-	KEY(7, 2, KEY_QI_FN),	/* S60 */
-#endif
-};
-
-static const struct matrix_keymap_data qi_lb60_keymap_data = {
-	.keymap		= qi_lb60_keymap,
-	.keymap_size	= ARRAY_SIZE(qi_lb60_keymap),
-};
-
-static const unsigned int qi_lb60_keypad_cols[] = {
-	74, 75, 76, 77, 78, 79, 80, 81,
-};
-
-static const unsigned int qi_lb60_keypad_rows[] = {
-	114, 115, 116, 117, 118, 119, 120,
-#ifndef KEEP_UART_ALIVE
-	122,
-#endif
-};
-
-static struct matrix_keypad_platform_data qi_lb60_pdata = {
-	.keymap_data = &qi_lb60_keymap_data,
-	.col_gpios	= qi_lb60_keypad_cols,
-	.row_gpios	= qi_lb60_keypad_rows,
-	.num_col_gpios	= ARRAY_SIZE(qi_lb60_keypad_cols),
-	.num_row_gpios	= ARRAY_SIZE(qi_lb60_keypad_rows),
-	.col_scan_delay_us	= 10,
-	.debounce_ms		= 10,
-	.wakeup			= 1,
-	.active_low		= 1,
-};
-
-static struct platform_device qi_lb60_keypad = {
-	.name		= "matrix-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &qi_lb60_pdata,
-	},
-};
-
-/* Display */
-static struct fb_videomode qi_lb60_video_modes[] = {
-	{
-		.name = "320x240",
-		.xres = 320,
-		.yres = 240,
-		.refresh = 30,
-		.left_margin = 140,
-		.right_margin = 273,
-		.upper_margin = 20,
-		.lower_margin = 2,
-		.hsync_len = 1,
-		.vsync_len = 1,
-		.sync = 0,
-		.vmode = FB_VMODE_NONINTERLACED,
-	},
-};
-
-static struct jz4740_fb_platform_data qi_lb60_fb_pdata = {
-	.width		= 60,
-	.height		= 45,
-	.num_modes	= ARRAY_SIZE(qi_lb60_video_modes),
-	.modes		= qi_lb60_video_modes,
-	.bpp		= 24,
-	.lcd_type	= JZ_LCD_TYPE_8BIT_SERIAL,
-	.pixclk_falling_edge = 1,
-};
-
-
-struct spi_gpio_platform_data spigpio_platform_data = {
-	.sck = JZ_GPIO_PORTC(23),
-	.mosi = JZ_GPIO_PORTC(22),
-	.miso = JZ_GPIO_PORTC(22),
-	.num_chipselect = 1,
-};
-
-static struct platform_device spigpio_device = {
-	.name = "spi_gpio",
-	.id   = 1,
-	.dev = {
-		.platform_data = &spigpio_platform_data,
-	},
-};
-
-static struct spi_board_info qi_lb60_spi_board_info[] = {
-	{
-		.modalias = "gpm940b0",
-		.controller_data = (void*)JZ_GPIO_PORTC(21),
-		.chip_select = 0,
-		.bus_num = 1,
-		.max_speed_hz = 30 * 1000,
-	},
-};
-
-/* Battery */
-static struct jz_battery_platform_data qi_lb60_battery_pdata = {
-	.gpio_charge = GPIO_CHARG_STAT_N,
-	.gpio_charge_active_low = 1,
-	.info = {
-		.name = "battery",
-		.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
-		.voltage_max_design = 4200000,
-		.voltage_min_design = 3600000,
-	},
-};
-
-static char *qi_lb60_batteries[] = {
-	"battery",
-};
-
-static struct gpio_charger_platform_data qi_lb60_charger_pdata = {
-	.name = "USB",
-	.type = POWER_SUPPLY_TYPE_USB,
-	.gpio = GPIO_USB_DETE,
-	.gpio_active_low = 1,
-	.batteries = qi_lb60_batteries,
-	.num_batteries = ARRAY_SIZE(qi_lb60_batteries),
-};
-
-static struct platform_device qi_lb60_charger_device = {
-	.name = "gpio-charger",
-	.dev = {
-		.platform_data = &qi_lb60_charger_pdata,
-	},
-};
-
-/* GPIO Key: power */
-static struct gpio_keys_button qi_lb60_gpio_keys_buttons[] = {
-	[0] = {
-		.code		= KEY_POWER,
-		.gpio		= GPIO_WAKEUP_N,
-		.active_low	= 1,
-		.desc		= "Power",
-		.wakeup		= 1,
-	},
-};
-
-static struct gpio_keys_platform_data qi_lb60_gpio_keys_data = {
-	.nbuttons = ARRAY_SIZE(qi_lb60_gpio_keys_buttons),
-	.buttons = qi_lb60_gpio_keys_buttons,
-};
-
-static struct platform_device qi_lb60_gpio_keys = {
-	.name =	"gpio-keys",
-	.id =	-1,
-	.dev = {
-		.platform_data = &qi_lb60_gpio_keys_data,
-	}
-};
-
-static struct jz4740_mmc_platform_data qi_lb60_mmc_pdata = {
-	.gpio_card_detect	= JZ_GPIO_PORTD(0),
-	.gpio_read_only		= -1,
-	.gpio_power		= JZ_GPIO_PORTD(2),
-	.power_active_low	= 1,
-};
-
-static struct platform_device *jz_platform_devices[] __initdata = {
-	&jz4740_usb_ohci_device,
-	&jz4740_usb_gdt_device,
-	&jz4740_mmc_device,
-	&jz4740_nand_device,
-	&qi_lb60_keypad,
-	&spigpio_device,
-	&jz4740_framebuffer_device,
-	&jz4740_i2s_device,
-	&jz4740_codec_device,
-	&jz4740_rtc_device,
-	&jz4740_adc_device,
-	&jz4740_battery_device,
-	&qi_lb60_gpio_keys,
-	&qi_lb60_charger_device,
-};
-
-static void __init board_gpio_setup(void)
-{
-	/* We only need to enable/disable pullup here for pins used in generic
-	 * drivers. Everything else is done by the drivers themselfs. */
-	jz_gpio_disable_pullup(GPIO_SD_VCC_EN_N);
-	jz_gpio_disable_pullup(GPIO_SD_CD_N);
-}
-
-static int __init qi_lb60_init_platform_devices(void)
-{
-	jz4740_framebuffer_device.dev.platform_data = &qi_lb60_fb_pdata;
-	jz4740_nand_device.dev.platform_data = &qi_lb60_nand_pdata;
-	jz4740_battery_device.dev.platform_data = &qi_lb60_battery_pdata;
-	jz4740_mmc_device.dev.platform_data = &qi_lb60_mmc_pdata;
-
-	spi_register_board_info(qi_lb60_spi_board_info,
-				ARRAY_SIZE(qi_lb60_spi_board_info));
-
-	return platform_add_devices(jz_platform_devices,
-					ARRAY_SIZE(jz_platform_devices));
-
-}
-
-struct jz4740_clock_board_data jz4740_clock_bdata = {
-	.ext_rate = 12000000,
-	.rtc_rate = 32768,
-};
-
-extern int jz_gpiolib_init(void);
-
-static __init int board_avt2(char *str)
-{
-	qi_lb60_mmc_pdata.card_detect_active_low = 1;
-	qi_lb60_mmc_pdata.power_active_low	= 1;
-
-	return 1;
-}
-
-__setup("avt2", board_avt2);
-
-static int __init qi_lb60_board_setup(void)
-{
-	printk("Qi Hardware JZ4740 QI_LB60 setup\n");
-	if (jz_gpiolib_init())
-		panic("Failed to initalize jz gpio\n");
-
-	jz4740_clock_init();
-	board_gpio_setup();
-
-	if (qi_lb60_init_platform_devices())
-		panic("Failed to initalize platform devices\n");
-
-	return 0;
-}
-
-arch_initcall(qi_lb60_board_setup);