aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/sunxi
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/sunxi')
-rw-r--r--target/linux/sunxi/config-3.14465
-rw-r--r--target/linux/sunxi/patches-3.14/100-dt-sun4i-add-missing-serial-aliases.patch28
-rw-r--r--target/linux/sunxi/patches-3.14/101-dt-sun6i-add-missing-serial-aliases.patch32
-rw-r--r--target/linux/sunxi/patches-3.14/102-dt-sun7i-add-missing-serial-aliases.patch30
-rw-r--r--target/linux/sunxi/patches-3.14/103-dt-sun5i-add-missing-serial-aliases.patch27
-rw-r--r--target/linux/sunxi/patches-3.14/104-dt-sun7i-add-pinmuxing-for-uart2.patch30
-rw-r--r--target/linux/sunxi/patches-3.14/105-dt-sun4i-add-linksprite-pcduino.patch78
-rw-r--r--target/linux/sunxi/patches-3.14/106-dt-sun7i-add-arch-timer-node.patch31
-rw-r--r--target/linux/sunxi/patches-3.14/107-dt-sun4i-add-a10-lime.patch141
-rw-r--r--target/linux/sunxi/patches-3.14/110-dt-sun6i-add-pll-and-spi-modclocks.patch77
-rw-r--r--target/linux/sunxi/patches-3.14/111-dt-sun4i-rename-clocknodes.patch134
-rw-r--r--target/linux/sunxi/patches-3.14/112-dt-sun5i-rename-clocknodes.patch254
-rw-r--r--target/linux/sunxi/patches-3.14/113-dt-sun6i-rename-clocknodes.patch107
-rw-r--r--target/linux/sunxi/patches-3.14/114-dt-sun7i-rename-clocknodes.patch127
-rw-r--r--target/linux/sunxi/patches-3.14/115-dt-sun6i-fix-mod0-compat.patch51
-rw-r--r--target/linux/sunxi/patches-3.14/116-dt-sun7i-add-usb-to-cubietruck.patch23
-rw-r--r--target/linux/sunxi/patches-3.14/120-dt-sun7i-add-gmac-clocknode.patch51
-rw-r--r--target/linux/sunxi/patches-3.14/121-dt-sun7i-add-gmac-ctrlnode.patch34
-rw-r--r--target/linux/sunxi/patches-3.14/122-dt-sun7i-add-pinmuxing-for-gmac.patch48
-rw-r--r--target/linux/sunxi/patches-3.14/123-dt-sun7i-cubietruck-enable-gmac.patch33
-rw-r--r--target/linux/sunxi/patches-3.14/124-dt-sun7i-cubieboard2-enable-gmac.patch56
-rw-r--r--target/linux/sunxi/patches-3.14/125-dt-sun7i-olinuxinom-enable-gmac.patch57
-rw-r--r--target/linux/sunxi/patches-3.14/126-dt-sun7i-add-eth-alias-for-gmac.patch26
-rw-r--r--target/linux/sunxi/patches-3.14/130-dt-sun4i-add-usbclock-bindings.patch30
-rw-r--r--target/linux/sunxi/patches-3.14/131-dt-sun5i-add-usbclock-bindings.patch49
-rw-r--r--target/linux/sunxi/patches-3.14/132-dt-sun7i-add-usbclock-bindings.patch30
-rw-r--r--target/linux/sunxi/patches-3.14/135-pinctrl-fixes.patch78
-rw-r--r--target/linux/sunxi/patches-3.14/136-1-irqchip-sun4i-fixes.patch217
-rw-r--r--target/linux/sunxi/patches-3.14/137-1-pinctrl-create-irq-pin-mapping.patch36
-rw-r--r--target/linux/sunxi/patches-3.14/137-2-pinctrl-add-IRQCHIP_SKIP_SET_WAKE.patch26
-rw-r--r--target/linux/sunxi/patches-3.14/137-3-dt-sun7i-add-interrupt-cells.patch26
-rw-r--r--target/linux/sunxi/patches-3.14/140-dt-sunxi-convert-to-new-clock-compats.patch1017
-rw-r--r--target/linux/sunxi/patches-3.14/141-dt-sunxi-add-common-regulator-include.patch97
-rw-r--r--target/linux/sunxi/patches-3.14/145-1-dt-sun7i-add-a20-spi.patch73
-rw-r--r--target/linux/sunxi/patches-3.14/145-2-dt-sun4i-add-a10-spi.patch72
-rw-r--r--target/linux/sunxi/patches-3.14/145-3-dt-sun5i-add-a13-spi.patch55
-rw-r--r--target/linux/sunxi/patches-3.14/146-1-spi-add-a31-spi.patch559
-rw-r--r--target/linux/sunxi/patches-3.14/146-2-spi-add-a10-spi.patch558
-rw-r--r--target/linux/sunxi/patches-3.14/147-sun6i-enable-spi-in-defconfig.patch29
-rw-r--r--target/linux/sunxi/patches-3.14/148-dt-sun7i-add-spi-muxing.patch33
-rw-r--r--target/linux/sunxi/patches-3.14/149-dt-sun7i-add-spi-on-olinuxinom.patch41
-rw-r--r--target/linux/sunxi/patches-3.14/150-dt-sun4i-add-ahci.patch78
-rw-r--r--target/linux/sunxi/patches-3.14/151-dt-sun7i-add-ahci.patch136
-rw-r--r--target/linux/sunxi/patches-3.14/155-wdt-add-new-compats.patch46
-rw-r--r--target/linux/sunxi/patches-3.14/156-dt-sunxi-update-wdt-compats.patch73
-rw-r--r--target/linux/sunxi/patches-3.14/157-mach-add-new-wdtcompats-to-reboot-code.patch26
-rw-r--r--target/linux/sunxi/patches-3.14/160-dt-sun4i-add-usb-host-bindings.patch81
-rw-r--r--target/linux/sunxi/patches-3.14/161-dt-sun5i-add-usb-host-bindings.patch55
-rw-r--r--target/linux/sunxi/patches-3.14/162-dt-sun7i-add-usb-host-bindings.patch81
-rw-r--r--target/linux/sunxi/patches-3.14/163-dt-sun4i-add-usb-host-to-boards.patch240
-rw-r--r--target/linux/sunxi/patches-3.14/164-dt-sun5i-add-usb-host-to-boards.patch121
-rw-r--r--target/linux/sunxi/patches-3.14/165-dt-sun7i-add-usb-host-to-boards.patch161
-rw-r--r--target/linux/sunxi/patches-3.14/170-input-add-sun4i-ts-driver.patch341
-rw-r--r--target/linux/sunxi/patches-3.14/171-input-add-temp-sensor-support.patch256
-rw-r--r--target/linux/sunxi/patches-3.14/172-input-add-lradc-keys-driver.patch326
-rw-r--r--target/linux/sunxi/patches-3.14/173-1-dt-sun4i-add-lradc-node.patch26
-rw-r--r--target/linux/sunxi/patches-3.14/173-2-dt-sun5i-add-lradc-node.patch53
-rw-r--r--target/linux/sunxi/patches-3.14/173-3-dt-sun7i-add-lradc-node.patch52
-rw-r--r--target/linux/sunxi/patches-3.14/175-reset-add-of_reset_control_get.patch112
-rw-r--r--target/linux/sunxi/patches-3.14/176-clk-sun5i-add-support-for-reset-ctrler.patch62
-rw-r--r--target/linux/sunxi/patches-3.14/180-clk-sunxi-add-clock-output-names-dt-prop-support.patch50
-rw-r--r--target/linux/sunxi/patches-3.14/181-clk-sunxi-add-names-for-pll56.patch78
-rw-r--r--target/linux/sunxi/patches-3.14/182-clk-sunxi-add-support-for-usb-clockreg-reset.patch128
-rw-r--r--target/linux/sunxi/patches-3.14/182-clk-sunxi-get-divs-parent-clockname.patch40
-rw-r--r--target/linux/sunxi/patches-3.14/183-clk-sunxi-add-usb-clockreg-defs.patch69
-rw-r--r--target/linux/sunxi/patches-3.14/184-clk-sunxi-add-pll6-on-a31.patch104
-rw-r--r--target/linux/sunxi/patches-3.14/185-clk-sunxi-add-a20-a31-gmac-clock.patch175
-rw-r--r--target/linux/sunxi/patches-3.14/186-clk-sunxi-add-new-clock-compats.patch178
-rw-r--r--target/linux/sunxi/patches-3.14/187-clk-sunxi-automatic-reparenting.patch68
-rw-r--r--target/linux/sunxi/patches-3.14/188-clk-sunxi-implement-mmc-phasectrl.patch87
-rw-r--r--target/linux/sunxi/patches-3.14/190-ahci-libahci-changes.patch872
-rw-r--r--target/linux/sunxi/patches-3.14/191-ahci-add-sunxi-driver.patch340
-rw-r--r--target/linux/sunxi/patches-3.14/192-ahci-platform-changes.patch202
-rw-r--r--target/linux/sunxi/patches-3.14/195-1-ohci-plat-changes.patch344
-rw-r--r--target/linux/sunxi/patches-3.14/195-2-ehci-plat-changes.patch414
-rw-r--r--target/linux/sunxi/patches-3.14/195-3-uhci-plat-changes.patch72
-rw-r--r--target/linux/sunxi/patches-3.14/195-4-xhci-plat-changes.patch49
-rw-r--r--target/linux/sunxi/patches-3.14/196-usb-add-sunxi-phy-driver.patch410
-rw-r--r--target/linux/sunxi/patches-3.14/200-mmc-add-driver.patch1150
-rw-r--r--target/linux/sunxi/patches-3.14/201-dt-sun4i-add-mmc-nodes_NEED_REFRESH.patch159
-rw-r--r--target/linux/sunxi/patches-3.14/202-dt-sun5i-add-mmc-nodes.patch125
-rw-r--r--target/linux/sunxi/patches-3.14/203-dt-sun7i-add-mmc-nodes.patch171
-rw-r--r--target/linux/sunxi/patches-3.14/205-nmi-add-driver.patch239
-rw-r--r--target/linux/sunxi/patches-3.14/206-dt-sun67i-add-nmi-irqchip.patch47
-rw-r--r--target/linux/sunxi/patches-3.14/210-mfd-add-axp20x-pmic-driver.patch502
-rw-r--r--target/linux/sunxi/patches-3.14/211-input-add-axp20x-power-enable-key-support.patch327
-rw-r--r--target/linux/sunxi/patches-3.14/212-regulator-add-axp20x-regulator-support.patch402
-rw-r--r--target/linux/sunxi/patches-3.14/213-dt-sunxi-add-x-powers.patch77
-rw-r--r--target/linux/sunxi/patches-3.14/214-1-dt-sun7i-add-axp209-to-cubieboard2.patch35
-rw-r--r--target/linux/sunxi/patches-3.14/214-2-dt-sun4i-add-axp209-to-boards.patch142
-rw-r--r--target/linux/sunxi/patches-3.14/214-3-dt-sun7i-add-axp209-to-cubietruck.patch49
-rw-r--r--target/linux/sunxi/patches-3.14/215-2-dt-sun5i-add-address-and-sizecells-to-i2c.patch40
-rw-r--r--target/linux/sunxi/patches-3.14/215-3-dt-sun7i-add-address-and-sizecells-to-i2c.patch58
-rw-r--r--target/linux/sunxi/patches-3.14/215-dt-sun4i-add-address-and-sizecells-to-i2c.patch40
-rw-r--r--target/linux/sunxi/patches-3.14/216-dt-sun7i-add-i2c-to-cubietruck.patch43
-rw-r--r--target/linux/sunxi/patches-3.14/220-clk-sunxi-remove-calls-to-clk_put.patch36
-rw-r--r--target/linux/sunxi/patches-3.14/230-net-rfkill-changes.patch148
-rw-r--r--target/linux/sunxi/patches-3.14/231-1-brcmfmac-fix-sdio-sending.patch32
-rw-r--r--target/linux/sunxi/patches-3.14/231-2-brcmfmac-fix-use-of-skb-ctrlbuf-in-SDIO.patch64
-rw-r--r--target/linux/sunxi/patches-3.14/232-1-dt-sun7i-add-wifi-to-cubietruck.patch91
-rw-r--r--target/linux/sunxi/patches-3.14/232-2-dt-sun7i-add-bluetooth-to-cubietruck.patch73
-rw-r--r--target/linux/sunxi/patches-3.14/250-pwm-add-driver.patch369
-rw-r--r--target/linux/sunxi/patches-3.14/251-1-dt-sun4i-add-pinmux-for-pwm.patch36
-rw-r--r--target/linux/sunxi/patches-3.14/251-2-dt-sun7i-add-pinmux-for-pwm.patch36
-rw-r--r--target/linux/sunxi/patches-3.14/252-1-dt-sun4i-add-pwm-support.patch30
-rw-r--r--target/linux/sunxi/patches-3.14/252-2-dt-sun7i-add-pwm-support.patch30
-rw-r--r--target/linux/sunxi/patches-3.14/260-dt-sun7i-enable-arm-pmu.patch28
-rw-r--r--target/linux/sunxi/patches-3.14/270-dt-sun7i-add-ss-to-a20.patch17
-rw-r--r--target/linux/sunxi/patches-3.14/271-crypto-add-ss.patch1241
-rw-r--r--target/linux/sunxi/patches-3.14/275-clk-sunxi-late-clock-fixes.patch29
-rw-r--r--target/linux/sunxi/patches-3.14/280-ir-add-driver.patch363
-rw-r--r--target/linux/sunxi/patches-3.14/281-dt-sun7i-add-ir-pins.patch36
-rw-r--r--target/linux/sunxi/patches-3.14/282-dt-sun7i-add-ir-ctrlers.patch40
-rw-r--r--target/linux/sunxi/patches-3.14/283-dt-sun7i-add-ir-to-cb2-cbt.patch47
-rw-r--r--target/linux/sunxi/patches-3.14/284-ir-backports-from-3.15.patch1210
-rw-r--r--target/linux/sunxi/patches-3.14/300-1-dt-sun7i-add-pcduino3.patch39
-rw-r--r--target/linux/sunxi/patches-3.14/300-2-dt-sun7i-add-pcduino3-dts.patch156
-rw-r--r--target/linux/sunxi/patches-3.14/301-dt-sun7i-update-pcduino3.patch12
-rw-r--r--target/linux/sunxi/patches-3.14/302-1-dt-sun7i-add-bananapi-Makefile.patch10
-rw-r--r--target/linux/sunxi/patches-3.14/302-2-dt-sun7i-add-bananapi-dts.patch163
-rw-r--r--target/linux/sunxi/patches-3.14/303-dt-sun7i-update-bananapi.patch12
-rw-r--r--target/linux/sunxi/patches-3.14/304-dt-sun7i-update-pcduino3-add-regulators.patch20
-rw-r--r--target/linux/sunxi/patches-3.14/305-dt-sun7i-update-bananapi-add-regulators.patch20
-rw-r--r--target/linux/sunxi/patches-3.14/306-dt-sun7i-fix-gmac-on-bananapi.patch46
-rw-r--r--target/linux/sunxi/patches-3.14/307-dt-sun7i-add-axp209-to-bananapi.patch17
-rw-r--r--target/linux/sunxi/patches-3.14/308-dt-sun7i-add-axp209-to-pcduino3.patch17
-rw-r--r--target/linux/sunxi/patches-3.14/309-dt-sun7i-add-ir-to-bananapi.patch32
-rw-r--r--target/linux/sunxi/patches-3.14/310-dt-sun7i-add-a20-olinuxino-lime.patch159
128 files changed, 0 insertions, 19237 deletions
diff --git a/target/linux/sunxi/config-3.14 b/target/linux/sunxi/config-3.14
deleted file mode 100644
index 848a809f33..0000000000
--- a/target/linux/sunxi/config-3.14
+++ /dev/null
@@ -1,465 +0,0 @@
-CONFIG_AHCI_SUNXI=y
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_CPU_AUTO is not set
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=288
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUNXI=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
-# CONFIG_ARM_CPU_SUSPEND is not set
-CONFIG_ARM_ERRATA_430973=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_NR_BANKS=8
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_PSCI=y
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-CONFIG_AUDIT=y
-# CONFIG_AUDITSYSCALL is not set
-CONFIG_AUDIT_GENERIC=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_AVERAGE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_BLK_CGROUP=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_BOUNCE=y
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CFQ_GROUP_IOSCHED=y
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CGROUP_FREEZER=y
-# CONFIG_CGROUP_NET_CLASSID is not set
-# CONFIG_CGROUP_PERF is not set
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk rootwait root=/dev/mmcblk0p2"
-CONFIG_CMDLINE_FORCE=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMPACTION=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONNECTOR=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_COREDUMP=y
-CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-CONFIG_CPUSETS=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRCT10DIF=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEV_SUNXI_SS=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DCACHE_WORD_ACCESS=y
-# CONFIG_DEBUG_BLK_CGROUP is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_UART_8250 is not set
-# CONFIG_DEBUG_UART_PL01X is not set
-# CONFIG_DEBUG_USER is not set
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_LZ4=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_DECOMPRESS_XZ=y
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_DIRECT_IO=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_OF=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_DWMAC_SUNXI=y
-# CONFIG_DW_DMAC_CORE is not set
-CONFIG_DYNAMIC_DEBUG=y
-# CONFIG_EEPROM_SUNXI_SID is not set
-CONFIG_ELF_CORE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_EXPERT is not set
-CONFIG_EXT4_FS=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FRAME_WARN=2048
-CONFIG_FREEZER=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GARP=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_ARCH_TIMER=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZ4=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_HWMON=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_MUX=y
-# CONFIG_I2C_MUX_GPIO is not set
-# CONFIG_I2C_MUX_PCA9541 is not set
-# CONFIG_I2C_MUX_PCA954x is not set
-CONFIG_I2C_MUX_PINCTRL=y
-CONFIG_I2C_MV64XXX=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_AXP20X_PEK=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_IOMMU_HELPER=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_IPC_NS=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_BOOTP is not set
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_KALLSYMS=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_XZ is not set
-CONFIG_KEYBOARD_SUN4I_LRADC=y
-CONFIG_KSM=y
-CONFIG_KTIME_SCALAR=y
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_REGULATOR is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_LOG_BUF_SHIFT=19
-CONFIG_LZ4_DECOMPRESS=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MDIO_SUN4I=y
-# CONFIG_MEMCG is not set
-CONFIG_MFD_AXP20X=y
-CONFIG_MFD_CORE=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_SUNXI=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NAMESPACES=y
-CONFIG_NEED_DMA_MAP_STATE=y
-# CONFIG_NEON is not set
-# CONFIG_NET_CLS_CGROUP is not set
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_NS=y
-CONFIG_NET_RX_BUSY_POLL=y
-CONFIG_NET_VENDOR_ALLWINNER=y
-CONFIG_NLS=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=4
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PARTITION_ADVANCED is not set
-# CONFIG_PCI_SYSCALL is not set
-CONFIG_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_SUN4I_USB=y
-CONFIG_PID_NS=y
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PINCTRL_SUNXI=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PPS=y
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_COUNT=y
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_RCU=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_PROC_EVENTS=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_PROC_PID_CPUSET=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_PWM=y
-CONFIG_PWM_SUNXI=y
-CONFIG_PWM_SYSFS=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTA=y
-CONFIG_QUOTACTL=y
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_RCU_BOOST is not set
-CONFIG_RCU_CPU_STALL_VERBOSE=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_GZIP=y
-CONFIG_RD_LZ4=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_RD_XZ=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_IRQ=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_AXP20X=y
-# CONFIG_REGULATOR_DEBUG is not set
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-CONFIG_RELAY=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RESOURCE_COUNTERS=y
-# CONFIG_RFKILL_REGULATOR is not set
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SCHED_HRTICK=y
-CONFIG_SCSI=y
-CONFIG_SECURITYFS=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_NR_UARTS=8
-CONFIG_SERIAL_8250_RUNTIME_UARTS=8
-CONFIG_SERIAL_8250_SYSRQ=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_APBPS2 is not set
-# CONFIG_SERIO_OLPC_APSP is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SLUB_CPU_PARTIAL=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLUB_DEBUG_ON is not set
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_SUN4I=y
-CONFIG_SPI_SUN6I=y
-# CONFIG_STAGING is not set
-# CONFIG_STMMAC_DA is not set
-# CONFIG_STMMAC_DEBUG_FS is not set
-CONFIG_STMMAC_ETH=y
-CONFIG_STMMAC_PLATFORM=y
-CONFIG_STOP_MACHINE=y
-CONFIG_STRICT_DEVMEM=y
-# CONFIG_SUN4I_EMAC is not set
-CONFIG_SUN4I_TIMER=y
-CONFIG_SUN5I_HSTIMER=y
-CONFIG_SUNXI_WATCHDOG=y
-CONFIG_SWIOTLB=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_TASK_XACCT=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
-# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_BU21013 is not set
-# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EGALAX is not set
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-# CONFIG_TOUCHSCREEN_MAX11801 is not set
-# CONFIG_TOUCHSCREEN_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_ST1232 is not set
-CONFIG_TOUCHSCREEN_SUN4I=y
-# CONFIG_TOUCHSCREEN_TSC2005 is not set
-# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
-CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_UEVENT_HELPER_PATH=""
-CONFIG_UID16=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNINLINE_SPIN_UNLOCK=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USER_NS is not set
-CONFIG_USE_OF=y
-CONFIG_UTS_NS=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_XEN is not set
-CONFIG_XFRM_ALGO=y
-CONFIG_XFRM_USER=y
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-# CONFIG_ZBUD is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/sunxi/patches-3.14/100-dt-sun4i-add-missing-serial-aliases.patch b/target/linux/sunxi/patches-3.14/100-dt-sun4i-add-missing-serial-aliases.patch
deleted file mode 100644
index caa5d15874..0000000000
--- a/target/linux/sunxi/patches-3.14/100-dt-sun4i-add-missing-serial-aliases.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From b25983b215e889447ae670a158b1af5e7f253091 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Thu, 2 Jan 2014 22:05:04 +0100
-Subject: [PATCH] ARM: sun4i: a10: Add missing serial aliases
-
-Some UART aliases have been defined, but not all of them. Add the remaining
-ones to be consistent and to ease the parsing of the DT by the bootloaders.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun4i-a10.dtsi | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/arch/arm/boot/dts/sun4i-a10.dtsi
-+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
-@@ -19,6 +19,12 @@
- ethernet0 = &emac;
- serial0 = &uart0;
- serial1 = &uart1;
-+ serial2 = &uart2;
-+ serial3 = &uart3;
-+ serial4 = &uart4;
-+ serial5 = &uart5;
-+ serial6 = &uart6;
-+ serial7 = &uart7;
- };
-
- cpus {
diff --git a/target/linux/sunxi/patches-3.14/101-dt-sun6i-add-missing-serial-aliases.patch b/target/linux/sunxi/patches-3.14/101-dt-sun6i-add-missing-serial-aliases.patch
deleted file mode 100644
index dd0f741b0d..0000000000
--- a/target/linux/sunxi/patches-3.14/101-dt-sun6i-add-missing-serial-aliases.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From b6e3460ee25b8af673d00df0435a304f5dbf7c40 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Thu, 2 Jan 2014 22:05:04 +0100
-Subject: [PATCH] ARM: sun6i: Add missing serial aliases
-
-Some UART aliases have been defined, but not all of them. Add the remaining
-ones to be consistent and to ease the parsing of the DT by the bootloaders.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun6i-a31.dtsi | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/arch/arm/boot/dts/sun6i-a31.dtsi
-+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
-@@ -16,6 +16,16 @@
- / {
- interrupt-parent = <&gic>;
-
-+ aliases {
-+ serial0 = &uart0;
-+ serial1 = &uart1;
-+ serial2 = &uart2;
-+ serial3 = &uart3;
-+ serial4 = &uart4;
-+ serial5 = &uart5;
-+ };
-+
-+
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
diff --git a/target/linux/sunxi/patches-3.14/102-dt-sun7i-add-missing-serial-aliases.patch b/target/linux/sunxi/patches-3.14/102-dt-sun7i-add-missing-serial-aliases.patch
deleted file mode 100644
index 80daddc1fc..0000000000
--- a/target/linux/sunxi/patches-3.14/102-dt-sun7i-add-missing-serial-aliases.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 1070f51b55d11e8831317d718acf2af46a181311 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Thu, 2 Jan 2014 22:05:04 +0100
-Subject: [PATCH] ARM: sun7i: Add missing serial aliases
-
-Some UART aliases have been defined, but not all of them. Add the remaining
-ones to be consistent and to ease the parsing of the DT by the bootloaders.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -18,6 +18,14 @@
-
- aliases {
- ethernet0 = &emac;
-+ serial0 = &uart0;
-+ serial1 = &uart1;
-+ serial2 = &uart2;
-+ serial3 = &uart3;
-+ serial4 = &uart4;
-+ serial5 = &uart5;
-+ serial6 = &uart6;
-+ serial7 = &uart7;
- };
-
- cpus {
diff --git a/target/linux/sunxi/patches-3.14/103-dt-sun5i-add-missing-serial-aliases.patch b/target/linux/sunxi/patches-3.14/103-dt-sun5i-add-missing-serial-aliases.patch
deleted file mode 100644
index cd991dd6bc..0000000000
--- a/target/linux/sunxi/patches-3.14/103-dt-sun5i-add-missing-serial-aliases.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 0ffac463caf4b0022cf0d917552d51b3ec82849a Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Mon, 13 Jan 2014 11:08:47 +0100
-Subject: [PATCH] ARM: sun5i: a13: Add missing serial aliases
-
-Some UART aliases have been defined, but not all of them. Add the remaining
-ones to be consistent and to ease the parsing of the DT by the bootloaders.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun5i-a13.dtsi | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/arm/boot/dts/sun5i-a13.dtsi
-+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
-@@ -16,6 +16,11 @@
- / {
- interrupt-parent = <&intc>;
-
-+ aliases {
-+ serial0 = &uart1;
-+ serial1 = &uart3;
-+ };
-+
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
diff --git a/target/linux/sunxi/patches-3.14/104-dt-sun7i-add-pinmuxing-for-uart2.patch b/target/linux/sunxi/patches-3.14/104-dt-sun7i-add-pinmuxing-for-uart2.patch
deleted file mode 100644
index 84baf3926d..0000000000
--- a/target/linux/sunxi/patches-3.14/104-dt-sun7i-add-pinmuxing-for-uart2.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 875f2d579db0c3ea113f6367af9ccb32b3dbebcc Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Tue, 14 Jan 2014 22:49:50 +0800
-Subject: [PATCH] ARM: dts: sun7i: add pin muxing options for UART2
-
-UART2 is used on CubieTruck to connect to the Bluetooth module.
-Add the pin set used in this case.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -381,6 +381,13 @@
- allwinner,pull = <0>;
- };
-
-+ uart2_pins_a: uart2@0 {
-+ allwinner,pins = "PI16", "PI17", "PI18", "PI19";
-+ allwinner,function = "uart2";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
-+
- uart6_pins_a: uart6@0 {
- allwinner,pins = "PI12", "PI13";
- allwinner,function = "uart6";
diff --git a/target/linux/sunxi/patches-3.14/105-dt-sun4i-add-linksprite-pcduino.patch b/target/linux/sunxi/patches-3.14/105-dt-sun4i-add-linksprite-pcduino.patch
deleted file mode 100644
index 546381981d..0000000000
--- a/target/linux/sunxi/patches-3.14/105-dt-sun4i-add-linksprite-pcduino.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From 2fc6dcd5e7c76c203d2e174e70ef21393a231163 Mon Sep 17 00:00:00 2001
-From: Zoltan HERPAI <wigyori@uid0.hu>
-Date: Mon, 13 Jan 2014 14:15:01 +0100
-Subject: [PATCH] ARM: sun4i: dt: Add basic board support for LinkSprite
- pcDuino
-
-This patch will add a basic board support DT for the
-LinkSprite pcDuino board.
-
-Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/sun4i-a10-pcduino.dts | 48 +++++++++++++++++++++++++++++++++
- 2 files changed, 49 insertions(+)
- create mode 100644 arch/arm/boot/dts/sun4i-a10-pcduino.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -284,6 +284,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
- sun4i-a10-cubieboard.dtb \
- sun4i-a10-mini-xplus.dtb \
- sun4i-a10-hackberry.dtb \
-+ sun4i-a10-pcduino.dtb \
- sun5i-a10s-olinuxino-micro.dtb \
- sun5i-a13-olinuxino.dtb \
- sun5i-a13-olinuxino-micro.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
-@@ -0,0 +1,48 @@
-+/*
-+ * Copyright 2014 Zoltan HERPAI
-+ * Zoltan HERPAI <wigyori@uid0.hu>
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+/include/ "sun4i-a10.dtsi"
-+
-+/ {
-+ model = "LinkSprite pcDuino";
-+ compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10";
-+
-+ soc@01c00000 {
-+ emac: ethernet@01c0b000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&emac_pins_a>;
-+ phy = <&phy1>;
-+ status = "okay";
-+ };
-+
-+ mdio@01c0b080 {
-+ status = "okay";
-+
-+ phy1: ethernet-phy@1 {
-+ reg = <1>;
-+ };
-+ };
-+
-+ uart0: serial@01c28000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins_a>;
-+ status = "okay";
-+ };
-+
-+ i2c0: i2c@01c2ac00 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c0_pins_a>;
-+ status = "okay";
-+ };
-+ };
-+};
diff --git a/target/linux/sunxi/patches-3.14/106-dt-sun7i-add-arch-timer-node.patch b/target/linux/sunxi/patches-3.14/106-dt-sun7i-add-arch-timer-node.patch
deleted file mode 100644
index 386f04295c..0000000000
--- a/target/linux/sunxi/patches-3.14/106-dt-sun7i-add-arch-timer-node.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 0f9bb2cf6171f47d932df46e34cc5cfce384ff3d Mon Sep 17 00:00:00 2001
-From: Marc Zyngier <marc.zyngier@arm.com>
-Date: Tue, 18 Feb 2014 14:04:44 +0000
-Subject: [PATCH] ARM: sun7i: add arch timer node
-
-The Allwinner A20 SoC is built around a pair of Cortex-A7 cores,
-which have the usual generic timers. Report this in the DT.
-
-Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -49,6 +49,14 @@
- reg = <0x40000000 0x80000000>;
- };
-
-+ timer {
-+ compatible = "arm,armv7-timer";
-+ interrupts = <1 13 0xf08>,
-+ <1 14 0xf08>,
-+ <1 11 0xf08>,
-+ <1 10 0xf08>;
-+ };
-+
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
diff --git a/target/linux/sunxi/patches-3.14/107-dt-sun4i-add-a10-lime.patch b/target/linux/sunxi/patches-3.14/107-dt-sun4i-add-a10-lime.patch
deleted file mode 100644
index d50f362fb0..0000000000
--- a/target/linux/sunxi/patches-3.14/107-dt-sun4i-add-a10-lime.patch
+++ /dev/null
@@ -1,141 +0,0 @@
-From a1c70ed831e4d5356618834202b0da3aa34e218e Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Fri, 10 Jan 2014 23:23:06 +0100
-Subject: [PATCH] ARM: sun4i: dt: Add support for the A10-OLinuXino-LIME board
-
-This add support for the A10-OLinuXino-LIME:
-https://www.olimex.com/Products/OLinuXino/A10/A10-OLinuXino-LIME
-
-A low cost Allwinner A10 based dev-board, with sata, ethernet, hdmi and 2x USB.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 111 +++++++++++++++++++++++++
- 2 files changed, 112 insertions(+)
- create mode 100644 arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -284,6 +284,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
- sun4i-a10-cubieboard.dtb \
- sun4i-a10-mini-xplus.dtb \
- sun4i-a10-hackberry.dtb \
-+ sun4i-a10-olinuxino-lime.dtb \
- sun4i-a10-pcduino.dtb \
- sun5i-a10s-olinuxino-micro.dtb \
- sun5i-a13-olinuxino.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
-@@ -0,0 +1,111 @@
-+/*
-+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+/include/ "sun4i-a10.dtsi"
-+/include/ "sunxi-common-regulators.dtsi"
-+
-+/ {
-+ model = "Olimex A10-OLinuXino-LIME";
-+ compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
-+
-+ soc@01c00000 {
-+ emac: ethernet@01c0b000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&emac_pins_a>;
-+ phy = <&phy1>;
-+ status = "okay";
-+ };
-+
-+ mdio@01c0b080 {
-+ status = "okay";
-+
-+ phy1: ethernet-phy@1 {
-+ reg = <1>;
-+ };
-+ };
-+
-+ usbphy: phy@01c13400 {
-+ usb1_vbus-supply = <&reg_usb1_vbus>;
-+ usb2_vbus-supply = <&reg_usb2_vbus>;
-+ status = "okay";
-+ };
-+
-+ ehci0: usb@01c14000 {
-+ status = "okay";
-+ };
-+
-+ ohci0: usb@01c14400 {
-+ status = "okay";
-+ };
-+
-+ ahci: sata@01c18000 {
-+ target-supply = <&reg_ahci_5v>;
-+ status = "okay";
-+ };
-+
-+ ehci1: usb@01c1c000 {
-+ status = "okay";
-+ };
-+
-+ ohci1: usb@01c1c400 {
-+ status = "okay";
-+ };
-+
-+ pinctrl@01c20800 {
-+ ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
-+ allwinner,pins = "PC3";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
-+
-+ led_pins_olinuxinolime: led_pins@0 {
-+ allwinner,pins = "PH2";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <1>;
-+ allwinner,pull = <0>;
-+ };
-+ };
-+
-+ uart0: serial@01c28000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins_a>;
-+ status = "okay";
-+ };
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&led_pins_olinuxinolime>;
-+
-+ green {
-+ label = "a10-olinuxino-lime:green:usr";
-+ gpios = <&pio 7 2 0>;
-+ default-state = "on";
-+ };
-+ };
-+
-+ reg_ahci_5v: ahci-5v {
-+ pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
-+ gpio = <&pio 2 3 0>;
-+ status = "okay";
-+ };
-+
-+ reg_usb1_vbus: usb1-vbus {
-+ status = "okay";
-+ };
-+
-+ reg_usb2_vbus: usb2-vbus {
-+ status = "okay";
-+ };
-+};
diff --git a/target/linux/sunxi/patches-3.14/110-dt-sun6i-add-pll-and-spi-modclocks.patch b/target/linux/sunxi/patches-3.14/110-dt-sun6i-add-pll-and-spi-modclocks.patch
deleted file mode 100644
index 7d8c2cfbd2..0000000000
--- a/target/linux/sunxi/patches-3.14/110-dt-sun6i-add-pll-and-spi-modclocks.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From 7f94ebf35b017f1664e957857a7f36752e2577cd Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Wed, 5 Feb 2014 14:05:04 +0100
-Subject: [PATCH] ARM: sun6i: dt: Add PLL6 and SPI module clocks
-
-The module clocks in the A31 are still compatible with the A10 one. Add the SPI
-module clocks and the PLL6 in the device tree to allow their use by the SPI
-controllers.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun6i-a31.dtsi | 46 ++++++++++++++++++++++++++++++++--------
- 1 file changed, 37 insertions(+), 9 deletions(-)
-
---- a/arch/arm/boot/dts/sun6i-a31.dtsi
-+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
-@@ -83,16 +83,12 @@
- clocks = <&osc24M>;
- };
-
-- /*
-- * This is a dummy clock, to be used as placeholder on
-- * other mux clocks when a specific parent clock is not
-- * yet implemented. It should be dropped when the driver
-- * is complete.
-- */
-- pll6: pll6 {
-+ pll6: clk@01c20028 {
- #clock-cells = <0>;
-- compatible = "fixed-clock";
-- clock-frequency = <0>;
-+ compatible = "allwinner,sun6i-a31-pll6-clk";
-+ reg = <0x01c20028 0x4>;
-+ clocks = <&osc24M>;
-+ clock-output-names = "pll6";
- };
-
- cpu: cpu@01c20050 {
-@@ -192,6 +188,38 @@
- "apb2_uart1", "apb2_uart2", "apb2_uart3",
- "apb2_uart4", "apb2_uart5";
- };
-+
-+ spi0_clk: clk@01c200a0 {
-+ #clock-cells = <0>;
-+ compatible = "allwinner,sun4i-mod0-clk";
-+ reg = <0x01c200a0 0x4>;
-+ clocks = <&osc24M>, <&pll6>;
-+ clock-output-names = "spi0";
-+ };
-+
-+ spi1_clk: clk@01c200a4 {
-+ #clock-cells = <0>;
-+ compatible = "allwinner,sun4i-mod0-clk";
-+ reg = <0x01c200a4 0x4>;
-+ clocks = <&osc24M>, <&pll6>;
-+ clock-output-names = "spi1";
-+ };
-+
-+ spi2_clk: clk@01c200a8 {
-+ #clock-cells = <0>;
-+ compatible = "allwinner,sun4i-mod0-clk";
-+ reg = <0x01c200a8 0x4>;
-+ clocks = <&osc24M>, <&pll6>;
-+ clock-output-names = "spi2";
-+ };
-+
-+ spi3_clk: clk@01c200ac {
-+ #clock-cells = <0>;
-+ compatible = "allwinner,sun4i-mod0-clk";
-+ reg = <0x01c200ac 0x4>;
-+ clocks = <&osc24M>, <&pll6>;
-+ clock-output-names = "spi3";
-+ };
- };
-
- soc@01c00000 {
diff --git a/target/linux/sunxi/patches-3.14/111-dt-sun4i-rename-clocknodes.patch b/target/linux/sunxi/patches-3.14/111-dt-sun4i-rename-clocknodes.patch
deleted file mode 100644
index 9846d5cdee..0000000000
--- a/target/linux/sunxi/patches-3.14/111-dt-sun4i-rename-clocknodes.patch
+++ /dev/null
@@ -1,134 +0,0 @@
-From 35b7dfc295f4d6079572a22a225c7444134e1f72 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Mon, 3 Feb 2014 09:51:41 +0800
-Subject: [PATCH] ARM: dts: sun4i: rename clock node names to clk@N
-
-Device tree naming conventions state that node names should match
-node function. Change fully functioning clock nodes to match and
-add clock-output-names to all sunxi clock nodes.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun4i-a10.dtsi | 30 ++++++++++++++++++++----------
- 1 file changed, 20 insertions(+), 10 deletions(-)
-
---- a/arch/arm/boot/dts/sun4i-a10.dtsi
-+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
-@@ -58,34 +58,38 @@
- clock-frequency = <0>;
- };
-
-- osc24M: osc24M@01c20050 {
-+ osc24M: clk@01c20050 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-osc-clk";
- reg = <0x01c20050 0x4>;
- clock-frequency = <24000000>;
-+ clock-output-names = "osc24M";
- };
-
-- osc32k: osc32k {
-+ osc32k: clk@0 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
-+ clock-output-names = "osc32k";
- };
-
-- pll1: pll1@01c20000 {
-+ pll1: clk@01c20000 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
-+ clock-output-names = "pll1";
- };
-
-- pll4: pll4@01c20018 {
-+ pll4: clk@01c20018 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-pll1-clk";
- reg = <0x01c20018 0x4>;
- clocks = <&osc24M>;
-+ clock-output-names = "pll4";
- };
-
-- pll5: pll5@01c20020 {
-+ pll5: clk@01c20020 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-pll5-clk";
- reg = <0x01c20020 0x4>;
-@@ -93,7 +97,7 @@
- clock-output-names = "pll5_ddr", "pll5_other";
- };
-
-- pll6: pll6@01c20028 {
-+ pll6: clk@01c20028 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-pll6-clk";
- reg = <0x01c20028 0x4>;
-@@ -107,6 +111,7 @@
- compatible = "allwinner,sun4i-cpu-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
-+ clock-output-names = "cpu";
- };
-
- axi: axi@01c20054 {
-@@ -114,9 +119,10 @@
- compatible = "allwinner,sun4i-axi-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&cpu>;
-+ clock-output-names = "axi";
- };
-
-- axi_gates: axi_gates@01c2005c {
-+ axi_gates: clk@01c2005c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-axi-gates-clk";
- reg = <0x01c2005c 0x4>;
-@@ -129,9 +135,10 @@
- compatible = "allwinner,sun4i-ahb-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&axi>;
-+ clock-output-names = "ahb";
- };
-
-- ahb_gates: ahb_gates@01c20060 {
-+ ahb_gates: clk@01c20060 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-ahb-gates-clk";
- reg = <0x01c20060 0x8>;
-@@ -154,9 +161,10 @@
- compatible = "allwinner,sun4i-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb>;
-+ clock-output-names = "apb0";
- };
-
-- apb0_gates: apb0_gates@01c20068 {
-+ apb0_gates: clk@01c20068 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-apb0-gates-clk";
- reg = <0x01c20068 0x4>;
-@@ -171,6 +179,7 @@
- compatible = "allwinner,sun4i-apb1-mux-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
-+ clock-output-names = "apb1_mux";
- };
-
- apb1: apb1@01c20058 {
-@@ -178,9 +187,10 @@
- compatible = "allwinner,sun4i-apb1-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&apb1_mux>;
-+ clock-output-names = "apb1";
- };
-
-- apb1_gates: apb1_gates@01c2006c {
-+ apb1_gates: clk@01c2006c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-apb1-gates-clk";
- reg = <0x01c2006c 0x4>;
diff --git a/target/linux/sunxi/patches-3.14/112-dt-sun5i-rename-clocknodes.patch b/target/linux/sunxi/patches-3.14/112-dt-sun5i-rename-clocknodes.patch
deleted file mode 100644
index d3e65a5e2c..0000000000
--- a/target/linux/sunxi/patches-3.14/112-dt-sun5i-rename-clocknodes.patch
+++ /dev/null
@@ -1,254 +0,0 @@
-From 266f79cef78cdf3545065a4786506eee0ae012b3 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Mon, 3 Feb 2014 09:51:42 +0800
-Subject: [PATCH] ARM: dts: sun5i: rename clock node names to clk@N
-
-Device tree naming conventions state that node names should match
-node function. Change fully functioning clock nodes to match and
-add clock-output-names to all sunxi clock nodes.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun5i-a10s.dtsi | 30 ++++++++++++++++++++----------
- arch/arm/boot/dts/sun5i-a13.dtsi | 30 ++++++++++++++++++++----------
- 2 files changed, 40 insertions(+), 20 deletions(-)
-
---- a/arch/arm/boot/dts/sun5i-a10s.dtsi
-+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
-@@ -47,34 +47,38 @@
- clock-frequency = <0>;
- };
-
-- osc24M: osc24M@01c20050 {
-+ osc24M: clk@01c20050 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-osc-clk";
- reg = <0x01c20050 0x4>;
- clock-frequency = <24000000>;
-+ clock-output-names = "osc24M";
- };
-
-- osc32k: osc32k {
-+ osc32k: clk@0 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
-+ clock-output-names = "osc32k";
- };
-
-- pll1: pll1@01c20000 {
-+ pll1: clk@01c20000 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
-+ clock-output-names = "pll1";
- };
-
-- pll4: pll4@01c20018 {
-+ pll4: clk@01c20018 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-pll1-clk";
- reg = <0x01c20018 0x4>;
- clocks = <&osc24M>;
-+ clock-output-names = "pll4";
- };
-
-- pll5: pll5@01c20020 {
-+ pll5: clk@01c20020 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-pll5-clk";
- reg = <0x01c20020 0x4>;
-@@ -82,7 +86,7 @@
- clock-output-names = "pll5_ddr", "pll5_other";
- };
-
-- pll6: pll6@01c20028 {
-+ pll6: clk@01c20028 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-pll6-clk";
- reg = <0x01c20028 0x4>;
-@@ -96,6 +100,7 @@
- compatible = "allwinner,sun4i-cpu-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
-+ clock-output-names = "cpu";
- };
-
- axi: axi@01c20054 {
-@@ -103,9 +108,10 @@
- compatible = "allwinner,sun4i-axi-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&cpu>;
-+ clock-output-names = "axi";
- };
-
-- axi_gates: axi_gates@01c2005c {
-+ axi_gates: clk@01c2005c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-axi-gates-clk";
- reg = <0x01c2005c 0x4>;
-@@ -118,9 +124,10 @@
- compatible = "allwinner,sun4i-ahb-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&axi>;
-+ clock-output-names = "ahb";
- };
-
-- ahb_gates: ahb_gates@01c20060 {
-+ ahb_gates: clk@01c20060 {
- #clock-cells = <1>;
- compatible = "allwinner,sun5i-a10s-ahb-gates-clk";
- reg = <0x01c20060 0x8>;
-@@ -139,9 +146,10 @@
- compatible = "allwinner,sun4i-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb>;
-+ clock-output-names = "apb0";
- };
-
-- apb0_gates: apb0_gates@01c20068 {
-+ apb0_gates: clk@01c20068 {
- #clock-cells = <1>;
- compatible = "allwinner,sun5i-a10s-apb0-gates-clk";
- reg = <0x01c20068 0x4>;
-@@ -155,6 +163,7 @@
- compatible = "allwinner,sun4i-apb1-mux-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
-+ clock-output-names = "apb1_mux";
- };
-
- apb1: apb1@01c20058 {
-@@ -162,9 +171,10 @@
- compatible = "allwinner,sun4i-apb1-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&apb1_mux>;
-+ clock-output-names = "apb1";
- };
-
-- apb1_gates: apb1_gates@01c2006c {
-+ apb1_gates: clk@01c2006c {
- #clock-cells = <1>;
- compatible = "allwinner,sun5i-a10s-apb1-gates-clk";
- reg = <0x01c2006c 0x4>;
---- a/arch/arm/boot/dts/sun5i-a13.dtsi
-+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
-@@ -52,34 +52,38 @@
- clock-frequency = <0>;
- };
-
-- osc24M: osc24M@01c20050 {
-+ osc24M: clk@01c20050 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-osc-clk";
- reg = <0x01c20050 0x4>;
- clock-frequency = <24000000>;
-+ clock-output-names = "osc24M";
- };
-
-- osc32k: osc32k {
-+ osc32k: clk@0 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
-+ clock-output-names = "osc32k";
- };
-
-- pll1: pll1@01c20000 {
-+ pll1: clk@01c20000 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
-+ clock-output-names = "pll1";
- };
-
-- pll4: pll4@01c20018 {
-+ pll4: clk@01c20018 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-pll1-clk";
- reg = <0x01c20018 0x4>;
- clocks = <&osc24M>;
-+ clock-output-names = "pll4";
- };
-
-- pll5: pll5@01c20020 {
-+ pll5: clk@01c20020 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-pll5-clk";
- reg = <0x01c20020 0x4>;
-@@ -87,7 +91,7 @@
- clock-output-names = "pll5_ddr", "pll5_other";
- };
-
-- pll6: pll6@01c20028 {
-+ pll6: clk@01c20028 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-pll6-clk";
- reg = <0x01c20028 0x4>;
-@@ -101,6 +105,7 @@
- compatible = "allwinner,sun4i-cpu-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
-+ clock-output-names = "cpu";
- };
-
- axi: axi@01c20054 {
-@@ -108,9 +113,10 @@
- compatible = "allwinner,sun4i-axi-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&cpu>;
-+ clock-output-names = "axi";
- };
-
-- axi_gates: axi_gates@01c2005c {
-+ axi_gates: clk@01c2005c {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-axi-gates-clk";
- reg = <0x01c2005c 0x4>;
-@@ -123,9 +129,10 @@
- compatible = "allwinner,sun4i-ahb-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&axi>;
-+ clock-output-names = "ahb";
- };
-
-- ahb_gates: ahb_gates@01c20060 {
-+ ahb_gates: clk@01c20060 {
- #clock-cells = <1>;
- compatible = "allwinner,sun5i-a13-ahb-gates-clk";
- reg = <0x01c20060 0x8>;
-@@ -143,9 +150,10 @@
- compatible = "allwinner,sun4i-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb>;
-+ clock-output-names = "apb0";
- };
-
-- apb0_gates: apb0_gates@01c20068 {
-+ apb0_gates: clk@01c20068 {
- #clock-cells = <1>;
- compatible = "allwinner,sun5i-a13-apb0-gates-clk";
- reg = <0x01c20068 0x4>;
-@@ -158,6 +166,7 @@
- compatible = "allwinner,sun4i-apb1-mux-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
-+ clock-output-names = "apb1_mux";
- };
-
- apb1: apb1@01c20058 {
-@@ -165,9 +174,10 @@
- compatible = "allwinner,sun4i-apb1-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&apb1_mux>;
-+ clock-output-names = "apb1";
- };
-
-- apb1_gates: apb1_gates@01c2006c {
-+ apb1_gates: clk@01c2006c {
- #clock-cells = <1>;
- compatible = "allwinner,sun5i-a13-apb1-gates-clk";
- reg = <0x01c2006c 0x4>;
diff --git a/target/linux/sunxi/patches-3.14/113-dt-sun6i-rename-clocknodes.patch b/target/linux/sunxi/patches-3.14/113-dt-sun6i-rename-clocknodes.patch
deleted file mode 100644
index b0f7648026..0000000000
--- a/target/linux/sunxi/patches-3.14/113-dt-sun6i-rename-clocknodes.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From 8bd1bb3a670aae791c4b2e9ab13c92768233368a Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Mon, 3 Feb 2014 09:51:43 +0800
-Subject: [PATCH] ARM: dts: sun6i: rename clock node names to clk@N
-
-Device tree naming conventions state that node names should match
-node function. Change fully functioning clock nodes to match and
-add clock-output-names to all sunxi clock nodes.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun6i-a31.dtsi | 19 ++++++++++++++-----
- 1 file changed, 14 insertions(+), 5 deletions(-)
-
---- a/arch/arm/boot/dts/sun6i-a31.dtsi
-+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
-@@ -70,17 +70,19 @@
- clock-frequency = <24000000>;
- };
-
-- osc32k: osc32k {
-+ osc32k: clk@0 {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <32768>;
-+ clock-output-names = "osc32k";
- };
-
-- pll1: pll1@01c20000 {
-+ pll1: clk@01c20000 {
- #clock-cells = <0>;
- compatible = "allwinner,sun6i-a31-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
-+ clock-output-names = "pll1";
- };
-
- pll6: clk@01c20028 {
-@@ -103,6 +105,7 @@
- * Allwinner.
- */
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
-+ clock-output-names = "cpu";
- };
-
- axi: axi@01c20050 {
-@@ -110,6 +113,7 @@
- compatible = "allwinner,sun4i-axi-clk";
- reg = <0x01c20050 0x4>;
- clocks = <&cpu>;
-+ clock-output-names = "axi";
- };
-
- ahb1_mux: ahb1_mux@01c20054 {
-@@ -117,6 +121,7 @@
- compatible = "allwinner,sun6i-a31-ahb1-mux-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>;
-+ clock-output-names = "ahb1_mux";
- };
-
- ahb1: ahb1@01c20054 {
-@@ -124,9 +129,10 @@
- compatible = "allwinner,sun4i-ahb-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb1_mux>;
-+ clock-output-names = "ahb1";
- };
-
-- ahb1_gates: ahb1_gates@01c20060 {
-+ ahb1_gates: clk@01c20060 {
- #clock-cells = <1>;
- compatible = "allwinner,sun6i-a31-ahb1-gates-clk";
- reg = <0x01c20060 0x8>;
-@@ -152,9 +158,10 @@
- compatible = "allwinner,sun4i-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb1>;
-+ clock-output-names = "apb1";
- };
-
-- apb1_gates: apb1_gates@01c20060 {
-+ apb1_gates: clk@01c20068 {
- #clock-cells = <1>;
- compatible = "allwinner,sun6i-a31-apb1-gates-clk";
- reg = <0x01c20068 0x4>;
-@@ -169,6 +176,7 @@
- compatible = "allwinner,sun4i-apb1-mux-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
-+ clock-output-names = "apb2_mux";
- };
-
- apb2: apb2@01c20058 {
-@@ -176,9 +184,10 @@
- compatible = "allwinner,sun6i-a31-apb2-div-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&apb2_mux>;
-+ clock-output-names = "apb2";
- };
-
-- apb2_gates: apb2_gates@01c2006c {
-+ apb2_gates: clk@01c2006c {
- #clock-cells = <1>;
- compatible = "allwinner,sun6i-a31-apb2-gates-clk";
- reg = <0x01c2006c 0x4>;
diff --git a/target/linux/sunxi/patches-3.14/114-dt-sun7i-rename-clocknodes.patch b/target/linux/sunxi/patches-3.14/114-dt-sun7i-rename-clocknodes.patch
deleted file mode 100644
index a8a6993e99..0000000000
--- a/target/linux/sunxi/patches-3.14/114-dt-sun7i-rename-clocknodes.patch
+++ /dev/null
@@ -1,127 +0,0 @@
-From c57b781689bba48dad635caf005962cc9c8e5e3d Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Mon, 3 Feb 2014 09:51:44 +0800
-Subject: [PATCH] ARM: dts: sun7i: rename clock node names to clk@N
-
-Device tree naming conventions state that node names should match
-node function. Change fully functioning clock nodes to match and
-add clock-output-names to all sunxi clock nodes.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun7i-a20.dtsi | 25 +++++++++++++++++--------
- 1 file changed, 17 insertions(+), 8 deletions(-)
-
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -62,11 +62,12 @@
- #size-cells = <1>;
- ranges;
-
-- osc24M: osc24M@01c20050 {
-+ osc24M: clk@01c20050 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-osc-clk";
- reg = <0x01c20050 0x4>;
- clock-frequency = <24000000>;
-+ clock-output-names = "osc24M";
- };
-
- osc32k: clk@0 {
-@@ -76,21 +77,23 @@
- clock-output-names = "osc32k";
- };
-
-- pll1: pll1@01c20000 {
-+ pll1: clk@01c20000 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
-+ clock-output-names = "pll1";
- };
-
-- pll4: pll4@01c20018 {
-+ pll4: clk@01c20018 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-pll1-clk";
- reg = <0x01c20018 0x4>;
- clocks = <&osc24M>;
-+ clock-output-names = "pll4";
- };
-
-- pll5: pll5@01c20020 {
-+ pll5: clk@01c20020 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-pll5-clk";
- reg = <0x01c20020 0x4>;
-@@ -98,7 +101,7 @@
- clock-output-names = "pll5_ddr", "pll5_other";
- };
-
-- pll6: pll6@01c20028 {
-+ pll6: clk@01c20028 {
- #clock-cells = <1>;
- compatible = "allwinner,sun4i-pll6-clk";
- reg = <0x01c20028 0x4>;
-@@ -111,6 +114,7 @@
- compatible = "allwinner,sun4i-cpu-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>;
-+ clock-output-names = "cpu";
- };
-
- axi: axi@01c20054 {
-@@ -118,6 +122,7 @@
- compatible = "allwinner,sun4i-axi-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&cpu>;
-+ clock-output-names = "axi";
- };
-
- ahb: ahb@01c20054 {
-@@ -125,9 +130,10 @@
- compatible = "allwinner,sun4i-ahb-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&axi>;
-+ clock-output-names = "ahb";
- };
-
-- ahb_gates: ahb_gates@01c20060 {
-+ ahb_gates: clk@01c20060 {
- #clock-cells = <1>;
- compatible = "allwinner,sun7i-a20-ahb-gates-clk";
- reg = <0x01c20060 0x8>;
-@@ -152,9 +158,10 @@
- compatible = "allwinner,sun4i-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb>;
-+ clock-output-names = "apb0";
- };
-
-- apb0_gates: apb0_gates@01c20068 {
-+ apb0_gates: clk@01c20068 {
- #clock-cells = <1>;
- compatible = "allwinner,sun7i-a20-apb0-gates-clk";
- reg = <0x01c20068 0x4>;
-@@ -170,6 +177,7 @@
- compatible = "allwinner,sun4i-apb1-mux-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
-+ clock-output-names = "apb1_mux";
- };
-
- apb1: apb1@01c20058 {
-@@ -177,9 +185,10 @@
- compatible = "allwinner,sun4i-apb1-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&apb1_mux>;
-+ clock-output-names = "apb1";
- };
-
-- apb1_gates: apb1_gates@01c2006c {
-+ apb1_gates: clk@01c2006c {
- #clock-cells = <1>;
- compatible = "allwinner,sun7i-a20-apb1-gates-clk";
- reg = <0x01c2006c 0x4>;
diff --git a/target/linux/sunxi/patches-3.14/115-dt-sun6i-fix-mod0-compat.patch b/target/linux/sunxi/patches-3.14/115-dt-sun6i-fix-mod0-compat.patch
deleted file mode 100644
index f2644a1df7..0000000000
--- a/target/linux/sunxi/patches-3.14/115-dt-sun6i-fix-mod0-compat.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 95c1fe603fbea0fd01d98262bd5ff7d5442a86db Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Mon, 24 Feb 2014 17:29:06 +0100
-Subject: [PATCH] ARM: sun6i: dt: Fix mod0 compatible
-
-The module 0 clock compatibles were changed between the time the patch was sent
-and it was merged. Update the compatibles.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun6i-a31.dtsi | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/arm/boot/dts/sun6i-a31.dtsi
-+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
-@@ -200,7 +200,7 @@
-
- spi0_clk: clk@01c200a0 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a0 0x4>;
- clocks = <&osc24M>, <&pll6>;
- clock-output-names = "spi0";
-@@ -208,7 +208,7 @@
-
- spi1_clk: clk@01c200a4 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a4 0x4>;
- clocks = <&osc24M>, <&pll6>;
- clock-output-names = "spi1";
-@@ -216,7 +216,7 @@
-
- spi2_clk: clk@01c200a8 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a8 0x4>;
- clocks = <&osc24M>, <&pll6>;
- clock-output-names = "spi2";
-@@ -224,7 +224,7 @@
-
- spi3_clk: clk@01c200ac {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200ac 0x4>;
- clocks = <&osc24M>, <&pll6>;
- clock-output-names = "spi3";
diff --git a/target/linux/sunxi/patches-3.14/116-dt-sun7i-add-usb-to-cubietruck.patch b/target/linux/sunxi/patches-3.14/116-dt-sun7i-add-usb-to-cubietruck.patch
deleted file mode 100644
index 529665e240..0000000000
--- a/target/linux/sunxi/patches-3.14/116-dt-sun7i-add-usb-to-cubietruck.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-@@ -26,6 +26,20 @@
- allwinner,drive = <0>;
- allwinner,pull = <0>;
- };
-+
-+ usb1_vbus_pin: usb1_vbus_pin@0 {
-+ allwinner,pins = "PH6";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <2>;
-+ };
-+
-+ usb2_vbus_pin: usb2_vbus_pin@0 {
-+ allwinner,pins = "PH3";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <2>;
-+ };
- };
-
- uart0: serial@01c28000 {
diff --git a/target/linux/sunxi/patches-3.14/120-dt-sun7i-add-gmac-clocknode.patch b/target/linux/sunxi/patches-3.14/120-dt-sun7i-add-gmac-clocknode.patch
deleted file mode 100644
index 9a1e485fd8..0000000000
--- a/target/linux/sunxi/patches-3.14/120-dt-sun7i-add-gmac-clocknode.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 3e1660161aacc5aeeebb09a0c8d91ad01399e5cd Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Mon, 10 Feb 2014 18:35:48 +0800
-Subject: [PATCH] ARM: dts: sun7i: Add GMAC clock node to sun7i DTSI
-
-The GMAC uses 1 of 2 sources for its transmit clock, depending on the
-PHY interface mode. Add both sources as dummy clocks, and as parents
-to the GMAC clock node.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
----
- arch/arm/boot/dts/sun7i-a20.dtsi | 28 ++++++++++++++++++++++++++++
- 1 file changed, 28 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -330,6 +330,34 @@
- };
-
- /*
-+ * The following two are dummy clocks, placeholders used in the gmac_tx
-+ * clock. The gmac driver will choose one parent depending on the PHY
-+ * interface mode, using clk_set_rate auto-reparenting.
-+ * The actual TX clock rate is not controlled by the gmac_tx clock.
-+ */
-+ mii_phy_tx_clk: clk@2 {
-+ #clock-cells = <0>;
-+ compatible = "fixed-clock";
-+ clock-frequency = <25000000>;
-+ clock-output-names = "mii_phy_tx";
-+ };
-+
-+ gmac_int_tx_clk: clk@3 {
-+ #clock-cells = <0>;
-+ compatible = "fixed-clock";
-+ clock-frequency = <125000000>;
-+ clock-output-names = "gmac_int_tx";
-+ };
-+
-+ gmac_tx_clk: clk@01c20164 {
-+ #clock-cells = <0>;
-+ compatible = "allwinner,sun7i-a20-gmac-clk";
-+ reg = <0x01c20164 0x4>;
-+ clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
-+ clock-output-names = "gmac_tx";
-+ };
-+
-+ /*
- * Dummy clock used by output clocks
- */
- osc24M_32k: clk@1 {
diff --git a/target/linux/sunxi/patches-3.14/121-dt-sun7i-add-gmac-ctrlnode.patch b/target/linux/sunxi/patches-3.14/121-dt-sun7i-add-gmac-ctrlnode.patch
deleted file mode 100644
index 3ddb55ec2f..0000000000
--- a/target/linux/sunxi/patches-3.14/121-dt-sun7i-add-gmac-ctrlnode.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 22b9ac16c600694b12479a75461bce031295e4b9 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Mon, 10 Feb 2014 18:35:49 +0800
-Subject: [PATCH] ARM: dts: sun7i: Add GMAC controller node to sun7i DTSI
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
----
- arch/arm/boot/dts/sun7i-a20.dtsi | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -653,6 +653,21 @@
- status = "disabled";
- };
-
-+ gmac: ethernet@01c50000 {
-+ compatible = "allwinner,sun7i-a20-gmac";
-+ reg = <0x01c50000 0x10000>;
-+ interrupts = <0 85 4>;
-+ interrupt-names = "macirq";
-+ clocks = <&ahb_gates 49>, <&gmac_tx_clk>;
-+ clock-names = "stmmaceth", "allwinner_gmac_tx";
-+ snps,pbl = <2>;
-+ snps,fixed-burst;
-+ snps,force_sf_dma_mode;
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
- hstimer@01c60000 {
- compatible = "allwinner,sun7i-a20-hstimer";
- reg = <0x01c60000 0x1000>;
diff --git a/target/linux/sunxi/patches-3.14/122-dt-sun7i-add-pinmuxing-for-gmac.patch b/target/linux/sunxi/patches-3.14/122-dt-sun7i-add-pinmuxing-for-gmac.patch
deleted file mode 100644
index d539af245d..0000000000
--- a/target/linux/sunxi/patches-3.14/122-dt-sun7i-add-pinmuxing-for-gmac.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 9f6deb688f4cb733cd3f36e0cc88f14d2f81982d Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Mon, 10 Feb 2014 18:35:50 +0800
-Subject: [PATCH] ARM: dts: sun7i: Add pin muxing options for the GMAC
-
-The A20 has EMAC and GMAC muxed on the same pins.
-Add pin sets with gmac function for MII and RGMII mode to the DTSI.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
----
- arch/arm/boot/dts/sun7i-a20.dtsi | 26 ++++++++++++++++++++++++++
- 1 file changed, 26 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -492,6 +492,32 @@
- allwinner,drive = <0>;
- allwinner,pull = <0>;
- };
-+
-+ gmac_pins_mii_a: gmac_mii@0 {
-+ allwinner,pins = "PA0", "PA1", "PA2",
-+ "PA3", "PA4", "PA5", "PA6",
-+ "PA7", "PA8", "PA9", "PA10",
-+ "PA11", "PA12", "PA13", "PA14",
-+ "PA15", "PA16";
-+ allwinner,function = "gmac";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
-+
-+ gmac_pins_rgmii_a: gmac_rgmii@0 {
-+ allwinner,pins = "PA0", "PA1", "PA2",
-+ "PA3", "PA4", "PA5", "PA6",
-+ "PA7", "PA8", "PA10",
-+ "PA11", "PA12", "PA13",
-+ "PA15", "PA16";
-+ allwinner,function = "gmac";
-+ /*
-+ * data lines in RGMII mode use DDR mode
-+ * and need a higher signal drive strength
-+ */
-+ allwinner,drive = <3>;
-+ allwinner,pull = <0>;
-+ };
- };
-
- timer@01c20c00 {
diff --git a/target/linux/sunxi/patches-3.14/123-dt-sun7i-cubietruck-enable-gmac.patch b/target/linux/sunxi/patches-3.14/123-dt-sun7i-cubietruck-enable-gmac.patch
deleted file mode 100644
index bac445f31d..0000000000
--- a/target/linux/sunxi/patches-3.14/123-dt-sun7i-cubietruck-enable-gmac.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From d09483e1cfcc00be70450c469c3c23496a063d98 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Mon, 10 Feb 2014 18:35:51 +0800
-Subject: [PATCH] ARM: dts: sun7i: cubietruck: Enable the GMAC
-
-The CubieTruck uses the GMAC with an RGMII phy.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
----
- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-@@ -65,6 +65,18 @@
- pinctrl-0 = <&i2c2_pins_a>;
- status = "okay";
- };
-+
-+ gmac: ethernet@01c50000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&gmac_pins_rgmii_a>;
-+ phy = <&phy1>;
-+ phy-mode = "rgmii";
-+ status = "okay";
-+
-+ phy1: ethernet-phy@1 {
-+ reg = <1>;
-+ };
-+ };
- };
-
- leds {
diff --git a/target/linux/sunxi/patches-3.14/124-dt-sun7i-cubieboard2-enable-gmac.patch b/target/linux/sunxi/patches-3.14/124-dt-sun7i-cubieboard2-enable-gmac.patch
deleted file mode 100644
index c4744e9b74..0000000000
--- a/target/linux/sunxi/patches-3.14/124-dt-sun7i-cubieboard2-enable-gmac.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 856cae07bff4d7e7a111affd4f15803142d29880 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Mon, 10 Feb 2014 18:35:52 +0800
-Subject: [PATCH] ARM: dts: sun7i: cubieboard2: Enable GMAC instead of EMAC
-
-GMAC has better performance and fewer hardware issues.
-Use the GMAC in MII mode for ethernet instead of the EMAC.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
----
- arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 27 ++++++++++++---------------
- 1 file changed, 12 insertions(+), 15 deletions(-)
-
---- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
-@@ -19,21 +19,6 @@
- compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
-
- soc@01c00000 {
-- emac: ethernet@01c0b000 {
-- pinctrl-names = "default";
-- pinctrl-0 = <&emac_pins_a>;
-- phy = <&phy1>;
-- status = "okay";
-- };
--
-- mdio@01c0b080 {
-- status = "okay";
--
-- phy1: ethernet-phy@1 {
-- reg = <1>;
-- };
-- };
--
- pinctrl@01c20800 {
- led_pins_cubieboard2: led_pins@0 {
- allwinner,pins = "PH20", "PH21";
-@@ -60,6 +45,18 @@
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
- };
-+
-+ gmac: ethernet@01c50000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&gmac_pins_mii_a>;
-+ phy = <&phy1>;
-+ phy-mode = "mii";
-+ status = "okay";
-+
-+ phy1: ethernet-phy@1 {
-+ reg = <1>;
-+ };
-+ };
- };
-
- leds {
diff --git a/target/linux/sunxi/patches-3.14/125-dt-sun7i-olinuxinom-enable-gmac.patch b/target/linux/sunxi/patches-3.14/125-dt-sun7i-olinuxinom-enable-gmac.patch
deleted file mode 100644
index b4648c816b..0000000000
--- a/target/linux/sunxi/patches-3.14/125-dt-sun7i-olinuxinom-enable-gmac.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From f5b426a2eb246e91eb2de0cd215565d38d1d5ce7 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Mon, 10 Feb 2014 18:35:53 +0800
-Subject: [PATCH] ARM: dts: sun7i: a20-olinuxino-micro: Enable GMAC instead of
- EMAC
-
-GMAC has better performance and fewer hardware issues.
-Use the GMAC in MII mode for ethernet instead of the EMAC.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
----
- arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 27 +++++++++++--------------
- 1 file changed, 12 insertions(+), 15 deletions(-)
-
---- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
-@@ -19,21 +19,6 @@
- compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20";
-
- soc@01c00000 {
-- emac: ethernet@01c0b000 {
-- pinctrl-names = "default";
-- pinctrl-0 = <&emac_pins_a>;
-- phy = <&phy1>;
-- status = "okay";
-- };
--
-- mdio@01c0b080 {
-- status = "okay";
--
-- phy1: ethernet-phy@1 {
-- reg = <1>;
-- };
-- };
--
- pinctrl@01c20800 {
- led_pins_olinuxino: led_pins@0 {
- allwinner,pins = "PH2";
-@@ -78,6 +63,18 @@
- pinctrl-0 = <&i2c2_pins_a>;
- status = "okay";
- };
-+
-+ gmac: ethernet@01c50000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&gmac_pins_mii_a>;
-+ phy = <&phy1>;
-+ phy-mode = "mii";
-+ status = "okay";
-+
-+ phy1: ethernet-phy@1 {
-+ reg = <1>;
-+ };
-+ };
- };
-
- leds {
diff --git a/target/linux/sunxi/patches-3.14/126-dt-sun7i-add-eth-alias-for-gmac.patch b/target/linux/sunxi/patches-3.14/126-dt-sun7i-add-eth-alias-for-gmac.patch
deleted file mode 100644
index 014058802c..0000000000
--- a/target/linux/sunxi/patches-3.14/126-dt-sun7i-add-eth-alias-for-gmac.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 614b4b996be81daca9d8333e1ac163d23e1701c4 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Mon, 10 Feb 2014 18:35:54 +0800
-Subject: [PATCH] ARM: dts: sun7i: Add ethernet alias for GMAC
-
-All Allwinner A20 boards we support can only use either EMAC or GMAC,
-as they share the same pins. As we have switched all supported to
-GMAC, we should alias GMAC (the active controller) as ethernet0,
-so u-boot will insert the MAC address for the correct controller.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
----
- arch/arm/boot/dts/sun7i-a20.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -17,7 +17,7 @@
- interrupt-parent = <&gic>;
-
- aliases {
-- ethernet0 = &emac;
-+ ethernet0 = &gmac;
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
diff --git a/target/linux/sunxi/patches-3.14/130-dt-sun4i-add-usbclock-bindings.patch b/target/linux/sunxi/patches-3.14/130-dt-sun4i-add-usbclock-bindings.patch
deleted file mode 100644
index b94aeaf81c..0000000000
--- a/target/linux/sunxi/patches-3.14/130-dt-sun4i-add-usbclock-bindings.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From b5325f9813a6a7cf80ede22fbee66376abbe2384 Mon Sep 17 00:00:00 2001
-From: Roman Byshko <rbyshko@gmail.com>
-Date: Fri, 7 Feb 2014 16:21:51 +0100
-Subject: [PATCH] ARM: sun4i: dt: Add bindings for USB clocks
-
-Signed-off-by: Roman Byshko <rbyshko@gmail.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun4i-a10.dtsi | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/arch/arm/boot/dts/sun4i-a10.dtsi
-+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
-@@ -315,6 +315,15 @@
- clock-output-names = "ir1";
- };
-
-+ usb_clk: clk@01c200cc {
-+ #clock-cells = <1>;
-+ #reset-cells = <1>;
-+ compatible = "allwinner,sun4i-a10-usb-clk";
-+ reg = <0x01c200cc 0x4>;
-+ clocks = <&pll6 1>;
-+ clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
-+ };
-+
- spi3_clk: clk@01c200d4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
diff --git a/target/linux/sunxi/patches-3.14/131-dt-sun5i-add-usbclock-bindings.patch b/target/linux/sunxi/patches-3.14/131-dt-sun5i-add-usbclock-bindings.patch
deleted file mode 100644
index 366adb4b57..0000000000
--- a/target/linux/sunxi/patches-3.14/131-dt-sun5i-add-usbclock-bindings.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 5b08dd0d672b59fff16d02239ca6a36aaecdb1ca Mon Sep 17 00:00:00 2001
-From: Roman Byshko <rbyshko@gmail.com>
-Date: Fri, 7 Feb 2014 16:21:52 +0100
-Subject: [PATCH] ARM: sun5i: dt: Add bindings for USB clocks
-
-Signed-off-by: Roman Byshko <rbyshko@gmail.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun5i-a10s.dtsi | 9 +++++++++
- arch/arm/boot/dts/sun5i-a13.dtsi | 9 +++++++++
- 2 files changed, 18 insertions(+)
-
---- a/arch/arm/boot/dts/sun5i-a10s.dtsi
-+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
-@@ -272,6 +272,15 @@
- clock-output-names = "ir0";
- };
-
-+ usb_clk: clk@01c200cc {
-+ #clock-cells = <1>;
-+ #reset-cells = <1>;
-+ compatible = "allwinner,sun5i-a13-usb-clk";
-+ reg = <0x01c200cc 0x4>;
-+ clocks = <&pll6 1>;
-+ clock-output-names = "usb_ohci0", "usb_phy";
-+ };
-+
- mbus_clk: clk@01c2015c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
---- a/arch/arm/boot/dts/sun5i-a13.dtsi
-+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
-@@ -274,6 +274,15 @@
- clock-output-names = "ir0";
- };
-
-+ usb_clk: clk@01c200cc {
-+ #clock-cells = <1>;
-+ #reset-cells = <1>;
-+ compatible = "allwinner,sun5i-a13-usb-clk";
-+ reg = <0x01c200cc 0x4>;
-+ clocks = <&pll6 1>;
-+ clock-output-names = "usb_ohci0", "usb_phy";
-+ };
-+
- mbus_clk: clk@01c2015c {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
diff --git a/target/linux/sunxi/patches-3.14/132-dt-sun7i-add-usbclock-bindings.patch b/target/linux/sunxi/patches-3.14/132-dt-sun7i-add-usbclock-bindings.patch
deleted file mode 100644
index 1a97faef5e..0000000000
--- a/target/linux/sunxi/patches-3.14/132-dt-sun7i-add-usbclock-bindings.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 25a1ac92997df2b1e2c76a374d444605cbc96a9f Mon Sep 17 00:00:00 2001
-From: Roman Byshko <rbyshko@gmail.com>
-Date: Fri, 7 Feb 2014 16:21:53 +0100
-Subject: [PATCH] ARM: sun7i: dt: Add bindings for USB clocks
-
-Signed-off-by: Roman Byshko <rbyshko@gmail.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun7i-a20.dtsi | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -313,6 +313,15 @@
- clock-output-names = "ir1";
- };
-
-+ usb_clk: clk@01c200cc {
-+ #clock-cells = <1>;
-+ #reset-cells = <1>;
-+ compatible = "allwinner,sun4i-a10-usb-clk";
-+ reg = <0x01c200cc 0x4>;
-+ clocks = <&pll6 1>;
-+ clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
-+ };
-+
- spi3_clk: clk@01c200d4 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
diff --git a/target/linux/sunxi/patches-3.14/135-pinctrl-fixes.patch b/target/linux/sunxi/patches-3.14/135-pinctrl-fixes.patch
deleted file mode 100644
index 5eb1fabc0b..0000000000
--- a/target/linux/sunxi/patches-3.14/135-pinctrl-fixes.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From 68a7d9940935cb71440a9ff384e5859592b0dbfd Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Sat, 14 Dec 2013 17:20:13 +0100
-Subject: [PATCH] pinctrl-sunxi: Fix sun5i-a13 port F multiplexing
-
-The correct value for selecting the mmc0 function on port F pins is 2 not 4,
-as per the data-sheet:
-http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- drivers/pinctrl/pinctrl-sunxi-pins.h | 12 ++++++------
- 1 file changed, 6 insertions(+), 6 deletions(-)
-
---- a/drivers/pinctrl/pinctrl-sunxi-pins.h
-+++ b/drivers/pinctrl/pinctrl-sunxi-pins.h
-@@ -1932,27 +1932,27 @@ static const struct sunxi_desc_pin sun5i
- SUNXI_PIN(SUNXI_PINCTRL_PIN_PF0,
- SUNXI_FUNCTION(0x0, "gpio_in"),
- SUNXI_FUNCTION(0x1, "gpio_out"),
-- SUNXI_FUNCTION(0x4, "mmc0")), /* D1 */
-+ SUNXI_FUNCTION(0x2, "mmc0")), /* D1 */
- SUNXI_PIN(SUNXI_PINCTRL_PIN_PF1,
- SUNXI_FUNCTION(0x0, "gpio_in"),
- SUNXI_FUNCTION(0x1, "gpio_out"),
-- SUNXI_FUNCTION(0x4, "mmc0")), /* D0 */
-+ SUNXI_FUNCTION(0x2, "mmc0")), /* D0 */
- SUNXI_PIN(SUNXI_PINCTRL_PIN_PF2,
- SUNXI_FUNCTION(0x0, "gpio_in"),
- SUNXI_FUNCTION(0x1, "gpio_out"),
-- SUNXI_FUNCTION(0x4, "mmc0")), /* CLK */
-+ SUNXI_FUNCTION(0x2, "mmc0")), /* CLK */
- SUNXI_PIN(SUNXI_PINCTRL_PIN_PF3,
- SUNXI_FUNCTION(0x0, "gpio_in"),
- SUNXI_FUNCTION(0x1, "gpio_out"),
-- SUNXI_FUNCTION(0x4, "mmc0")), /* CMD */
-+ SUNXI_FUNCTION(0x2, "mmc0")), /* CMD */
- SUNXI_PIN(SUNXI_PINCTRL_PIN_PF4,
- SUNXI_FUNCTION(0x0, "gpio_in"),
- SUNXI_FUNCTION(0x1, "gpio_out"),
-- SUNXI_FUNCTION(0x4, "mmc0")), /* D3 */
-+ SUNXI_FUNCTION(0x2, "mmc0")), /* D3 */
- SUNXI_PIN(SUNXI_PINCTRL_PIN_PF5,
- SUNXI_FUNCTION(0x0, "gpio_in"),
- SUNXI_FUNCTION(0x1, "gpio_out"),
-- SUNXI_FUNCTION(0x4, "mmc0")), /* D2 */
-+ SUNXI_FUNCTION(0x2, "mmc0")), /* D2 */
- /* Hole */
- SUNXI_PIN(SUNXI_PINCTRL_PIN_PG0,
- SUNXI_FUNCTION(0x0, "gpio_in"),
---- a/drivers/pinctrl/pinctrl-sunxi.c
-+++ b/drivers/pinctrl/pinctrl-sunxi.c
-@@ -13,6 +13,7 @@
- #include <linux/io.h>
- #include <linux/clk.h>
- #include <linux/gpio.h>
-+#include <linux/irqchip/chained_irq.h>
- #include <linux/irqdomain.h>
- #include <linux/irqchip/chained_irq.h>
- #include <linux/module.h>
-@@ -670,6 +671,8 @@ static void sunxi_pinctrl_irq_handler(un
- struct sunxi_pinctrl *pctl = irq_get_handler_data(irq);
- const unsigned long reg = readl(pctl->membase + IRQ_STATUS_REG);
-
-+ chained_irq_enter(chip, desc);
-+
- /* Clear all interrupts */
- writel(reg, pctl->membase + IRQ_STATUS_REG);
-
-@@ -683,6 +686,7 @@ static void sunxi_pinctrl_irq_handler(un
- }
- chained_irq_exit(chip, desc);
- }
-+ chained_irq_exit(chip, desc);
- }
-
- static struct of_device_id sunxi_pinctrl_match[] = {
diff --git a/target/linux/sunxi/patches-3.14/136-1-irqchip-sun4i-fixes.patch b/target/linux/sunxi/patches-3.14/136-1-irqchip-sun4i-fixes.patch
deleted file mode 100644
index 4345d3e0dd..0000000000
--- a/target/linux/sunxi/patches-3.14/136-1-irqchip-sun4i-fixes.patch
+++ /dev/null
@@ -1,217 +0,0 @@
-From 843da234cfc0e7014f9e2da82786a485e0820665 Mon Sep 17 00:00:00 2001
-From: Thomas Gleixner <tglx@linutronix.de>
-Date: Thu, 13 Mar 2014 15:32:05 +0100
-Subject: [PATCH] irq: Add a new IRQCHIP_EOI_THREADED flag
-
-This flag must be used in combination with handle_fasteoi_irq, when set
-handle_fasteoi_irq will delay the calling of chip->irq_eoi until the threaded
-handler has run.
-
-Reviewed-by: Hans de Goede <hdegoede@redhat.com>
-Tested-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- include/linux/irq.h | 3 +++
- kernel/irq/chip.c | 48 ++++++++++++++++++++++++++++++++++++++++--------
- kernel/irq/internals.h | 1 +
- kernel/irq/manage.c | 2 +-
- 4 files changed, 45 insertions(+), 9 deletions(-)
-
---- a/include/linux/irq.h
-+++ b/include/linux/irq.h
-@@ -349,6 +349,8 @@ struct irq_chip {
- * IRQCHIP_ONOFFLINE_ENABLED: Only call irq_on/off_line callbacks
- * when irq enabled
- * IRQCHIP_SKIP_SET_WAKE: Skip chip.irq_set_wake(), for this irq chip
-+ * IRQCHIP_ONESHOT_SAFE: One shot does not require mask/unmask
-+ * IRQCHIP_EOI_THREADED: Chip requires eoi() on unmask in threaded mode
- */
- enum {
- IRQCHIP_SET_TYPE_MASKED = (1 << 0),
-@@ -357,6 +359,7 @@ enum {
- IRQCHIP_ONOFFLINE_ENABLED = (1 << 3),
- IRQCHIP_SKIP_SET_WAKE = (1 << 4),
- IRQCHIP_ONESHOT_SAFE = (1 << 5),
-+ IRQCHIP_EOI_THREADED = (1 << 6),
- };
-
- /* This include will go away once we isolated irq_desc usage to core code */
---- a/kernel/irq/chip.c
-+++ b/kernel/irq/chip.c
-@@ -281,6 +281,19 @@ void unmask_irq(struct irq_desc *desc)
- }
- }
-
-+void unmask_threaded_irq(struct irq_desc *desc)
-+{
-+ struct irq_chip *chip = desc->irq_data.chip;
-+
-+ if (chip->flags & IRQCHIP_EOI_THREADED)
-+ chip->irq_eoi(&desc->irq_data);
-+
-+ if (chip->irq_unmask) {
-+ chip->irq_unmask(&desc->irq_data);
-+ irq_state_clr_masked(desc);
-+ }
-+}
-+
- /*
- * handle_nested_irq - Handle a nested irq from a irq thread
- * @irq: the interrupt number
-@@ -435,6 +448,27 @@ static inline void preflow_handler(struc
- static inline void preflow_handler(struct irq_desc *desc) { }
- #endif
-
-+static void cond_unmask_eoi_irq(struct irq_desc *desc, struct irq_chip *chip)
-+{
-+ if (!(desc->istate & IRQS_ONESHOT)) {
-+ chip->irq_eoi(&desc->irq_data);
-+ return;
-+ }
-+ /*
-+ * We need to unmask in the following cases:
-+ * - Oneshot irq which did not wake the thread (caused by a
-+ * spurious interrupt or a primary handler handling it
-+ * completely).
-+ */
-+ if (!irqd_irq_disabled(&desc->irq_data) &&
-+ irqd_irq_masked(&desc->irq_data) && !desc->threads_oneshot) {
-+ chip->irq_eoi(&desc->irq_data);
-+ unmask_irq(desc);
-+ } else if (!(chip->flags & IRQCHIP_EOI_THREADED)) {
-+ chip->irq_eoi(&desc->irq_data);
-+ }
-+}
-+
- /**
- * handle_fasteoi_irq - irq handler for transparent controllers
- * @irq: the interrupt number
-@@ -448,6 +482,8 @@ static inline void preflow_handler(struc
- void
- handle_fasteoi_irq(unsigned int irq, struct irq_desc *desc)
- {
-+ struct irq_chip *chip = desc->irq_data.chip;
-+
- raw_spin_lock(&desc->lock);
-
- if (unlikely(irqd_irq_inprogress(&desc->irq_data)))
-@@ -473,18 +509,14 @@ handle_fasteoi_irq(unsigned int irq, str
- preflow_handler(desc);
- handle_irq_event(desc);
-
-- if (desc->istate & IRQS_ONESHOT)
-- cond_unmask_irq(desc);
-+ cond_unmask_eoi_irq(desc, chip);
-
--out_eoi:
-- desc->irq_data.chip->irq_eoi(&desc->irq_data);
--out_unlock:
- raw_spin_unlock(&desc->lock);
- return;
- out:
-- if (!(desc->irq_data.chip->flags & IRQCHIP_EOI_IF_HANDLED))
-- goto out_eoi;
-- goto out_unlock;
-+ if (!(chip->flags & IRQCHIP_EOI_IF_HANDLED))
-+ chip->irq_eoi(&desc->irq_data);
-+ raw_spin_unlock(&desc->lock);
- }
-
- /**
---- a/kernel/irq/internals.h
-+++ b/kernel/irq/internals.h
-@@ -73,6 +73,7 @@ extern void irq_percpu_enable(struct irq
- extern void irq_percpu_disable(struct irq_desc *desc, unsigned int cpu);
- extern void mask_irq(struct irq_desc *desc);
- extern void unmask_irq(struct irq_desc *desc);
-+extern void unmask_threaded_irq(struct irq_desc *desc);
-
- extern void init_kstat_irqs(struct irq_desc *desc, int node, int nr);
-
---- a/kernel/irq/manage.c
-+++ b/kernel/irq/manage.c
-@@ -713,7 +713,7 @@ again:
-
- if (!desc->threads_oneshot && !irqd_irq_disabled(&desc->irq_data) &&
- irqd_irq_masked(&desc->irq_data))
-- unmask_irq(desc);
-+ unmask_threaded_irq(desc);
-
- out_unlock:
- raw_spin_unlock_irq(&desc->lock);
---- a/drivers/irqchip/irq-sun4i.c
-+++ b/drivers/irqchip/irq-sun4i.c
-@@ -41,13 +41,11 @@ static asmlinkage void __exception_irq_e
- static void sun4i_irq_ack(struct irq_data *irqd)
- {
- unsigned int irq = irqd_to_hwirq(irqd);
-- unsigned int irq_off = irq % 32;
-- int reg = irq / 32;
-- u32 val;
-
-- val = readl(sun4i_irq_base + SUN4I_IRQ_PENDING_REG(reg));
-- writel(val | (1 << irq_off),
-- sun4i_irq_base + SUN4I_IRQ_PENDING_REG(reg));
-+ if (irq != 0)
-+ return; /* Only IRQ 0 / the ENMI needs to be acked */
-+
-+ writel(BIT(0), sun4i_irq_base + SUN4I_IRQ_PENDING_REG(0));
- }
-
- static void sun4i_irq_mask(struct irq_data *irqd)
-@@ -76,16 +74,16 @@ static void sun4i_irq_unmask(struct irq_
-
- static struct irq_chip sun4i_irq_chip = {
- .name = "sun4i_irq",
-- .irq_ack = sun4i_irq_ack,
-+ .irq_eoi = sun4i_irq_ack,
- .irq_mask = sun4i_irq_mask,
- .irq_unmask = sun4i_irq_unmask,
-+ .flags = IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED,
- };
-
- static int sun4i_irq_map(struct irq_domain *d, unsigned int virq,
- irq_hw_number_t hw)
- {
-- irq_set_chip_and_handler(virq, &sun4i_irq_chip,
-- handle_level_irq);
-+ irq_set_chip_and_handler(virq, &sun4i_irq_chip, handle_fasteoi_irq);
- set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
-
- return 0;
-@@ -109,7 +107,7 @@ static int __init sun4i_of_init(struct d
- writel(0, sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(1));
- writel(0, sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(2));
-
-- /* Mask all the interrupts */
-+ /* Unmask all the interrupts, ENABLE_REG(x) is used for masking */
- writel(0, sun4i_irq_base + SUN4I_IRQ_MASK_REG(0));
- writel(0, sun4i_irq_base + SUN4I_IRQ_MASK_REG(1));
- writel(0, sun4i_irq_base + SUN4I_IRQ_MASK_REG(2));
-@@ -140,10 +138,24 @@ static asmlinkage void __exception_irq_e
- {
- u32 irq, hwirq;
-
-+ /*
-+ * hwirq == 0 can mean one of 3 things:
-+ * 1) no more irqs pending
-+ * 2) irq 0 pending
-+ * 3) spurious irq
-+ * So if we immediately get a reading of 0, check the irq-pending reg
-+ * to differentiate between 2 and 3. We only do this once to avoid
-+ * the extra check in the common case of 1 hapening after having
-+ * read the vector-reg once.
-+ */
- hwirq = readl(sun4i_irq_base + SUN4I_IRQ_VECTOR_REG) >> 2;
-- while (hwirq != 0) {
-+ if (hwirq == 0 &&
-+ !(readl(sun4i_irq_base + SUN4I_IRQ_PENDING_REG(0)) & BIT(0)))
-+ return;
-+
-+ do {
- irq = irq_find_mapping(sun4i_irq_domain, hwirq);
- handle_IRQ(irq, regs);
- hwirq = readl(sun4i_irq_base + SUN4I_IRQ_VECTOR_REG) >> 2;
-- }
-+ } while (hwirq != 0);
- }
diff --git a/target/linux/sunxi/patches-3.14/137-1-pinctrl-create-irq-pin-mapping.patch b/target/linux/sunxi/patches-3.14/137-1-pinctrl-create-irq-pin-mapping.patch
deleted file mode 100644
index 1e4f1c79df..0000000000
--- a/target/linux/sunxi/patches-3.14/137-1-pinctrl-create-irq-pin-mapping.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 4c228d02d1339a286e259893062ea445be82b573 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Tue, 7 Jan 2014 18:56:29 +0800
-Subject: [PATCH] pinctrl: sunxi: create irq/pin mapping during init
-
-The irq/pin mapping is used to lookup the pin to mux to the irq
-function when the irq is enabled. It is created when gpio_to_irq
-is called. Creating the mapping during init allows us to map the
-interrupts directly from the device tree.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
----
- drivers/pinctrl/pinctrl-sunxi.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/drivers/pinctrl/pinctrl-sunxi.c
-+++ b/drivers/pinctrl/pinctrl-sunxi.c
-@@ -531,8 +531,6 @@ static int sunxi_pinctrl_gpio_to_irq(str
- if (!desc)
- return -EINVAL;
-
-- pctl->irq_array[desc->irqnum] = offset;
--
- dev_dbg(chip->dev, "%s: request IRQ for GPIO %d, return %d\n",
- chip->label, offset + chip->base, desc->irqnum);
-
-@@ -759,6 +757,9 @@ static int sunxi_pinctrl_build_state(str
- struct sunxi_desc_function *func = pin->functions;
-
- while (func->name) {
-+ /* Create interrupt mapping while we're at it */
-+ if (!strcmp(func->name, "irq"))
-+ pctl->irq_array[func->irqnum] = pin->pin.number;
- sunxi_pinctrl_add_function(pctl, func->name);
- func++;
- }
diff --git a/target/linux/sunxi/patches-3.14/137-2-pinctrl-add-IRQCHIP_SKIP_SET_WAKE.patch b/target/linux/sunxi/patches-3.14/137-2-pinctrl-add-IRQCHIP_SKIP_SET_WAKE.patch
deleted file mode 100644
index 58e13946d9..0000000000
--- a/target/linux/sunxi/patches-3.14/137-2-pinctrl-add-IRQCHIP_SKIP_SET_WAKE.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 77f1265dd02dfd5dcaa0ebd6d3ea1d131bc095e2 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Tue, 7 Jan 2014 19:01:29 +0800
-Subject: [PATCH] pinctrl: sunxi: add IRQCHIP_SKIP_SET_WAKE flag for pinctrl
- irq chip
-
-The sunxi pinctrl irq chip driver does not support wakeup at the
-moment. Adding IRQCHIP_SKIP_SET_WAKE lets the irqs work with drivers
-using wakeup.
-
-Also add a name to the irq chip.
----
- drivers/pinctrl/pinctrl-sunxi.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/pinctrl/pinctrl-sunxi.c
-+++ b/drivers/pinctrl/pinctrl-sunxi.c
-@@ -661,6 +661,8 @@ static struct irq_chip sunxi_pinctrl_irq
- .irq_mask_ack = sunxi_pinctrl_irq_mask_ack,
- .irq_unmask = sunxi_pinctrl_irq_unmask,
- .irq_set_type = sunxi_pinctrl_irq_set_type,
-+ .name = "sunxi-pio",
-+ .flags = IRQCHIP_SKIP_SET_WAKE,
- };
-
- static void sunxi_pinctrl_irq_handler(unsigned irq, struct irq_desc *desc)
diff --git a/target/linux/sunxi/patches-3.14/137-3-dt-sun7i-add-interrupt-cells.patch b/target/linux/sunxi/patches-3.14/137-3-dt-sun7i-add-interrupt-cells.patch
deleted file mode 100644
index fb3b5cde95..0000000000
--- a/target/linux/sunxi/patches-3.14/137-3-dt-sun7i-add-interrupt-cells.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From eda34c0692e479dd9cd2b7cb70986ae57f15187f Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Tue, 7 Jan 2014 18:50:01 +0800
-Subject: [PATCH] ARM: dts: sun7i: Add #interrupt-cells to pinctrl node
-
-The pinctrl device is also an interrupt controller for external
-interrupts. Add the missing #interrupt-cells property.
-
-Also remove the unused #address-cells property.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
----
- arch/arm/boot/dts/sun7i-a20.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -424,7 +424,7 @@
- clocks = <&apb0_gates 5>;
- gpio-controller;
- interrupt-controller;
-- #address-cells = <1>;
-+ #interrupt-cells = <2>;
- #size-cells = <0>;
- #gpio-cells = <3>;
-
diff --git a/target/linux/sunxi/patches-3.14/140-dt-sunxi-convert-to-new-clock-compats.patch b/target/linux/sunxi/patches-3.14/140-dt-sunxi-convert-to-new-clock-compats.patch
deleted file mode 100644
index 875aea1450..0000000000
--- a/target/linux/sunxi/patches-3.14/140-dt-sunxi-convert-to-new-clock-compats.patch
+++ /dev/null
@@ -1,1017 +0,0 @@
-From 46b2ee17d7321149b4d48dd86ee2e346624aa141 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Thu, 6 Feb 2014 09:55:58 +0100
-Subject: [PATCH] ARM: sunxi: dt: Convert to the new clock compatibles
-
-Switch the device tree to the new compatibles introduced in the clock drivers
-to have a common pattern accross all Allwinner SoCs.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun4i-a10.dtsi | 60 +++++++++++++++++++--------------------
- arch/arm/boot/dts/sun5i-a10s.dtsi | 48 +++++++++++++++----------------
- arch/arm/boot/dts/sun5i-a13.dtsi | 48 +++++++++++++++----------------
- arch/arm/boot/dts/sun6i-a31.dtsi | 10 +++----
- arch/arm/boot/dts/sun7i-a20.dtsi | 54 +++++++++++++++++------------------
- 5 files changed, 110 insertions(+), 110 deletions(-)
-
---- a/arch/arm/boot/dts/sun4i-a10.dtsi
-+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
-@@ -60,7 +60,7 @@
-
- osc24M: clk@01c20050 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-osc-clk";
-+ compatible = "allwinner,sun4i-a10-osc-clk";
- reg = <0x01c20050 0x4>;
- clock-frequency = <24000000>;
- clock-output-names = "osc24M";
-@@ -75,7 +75,7 @@
-
- pll1: clk@01c20000 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-pll1-clk";
-+ compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll1";
-@@ -83,7 +83,7 @@
-
- pll4: clk@01c20018 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-pll1-clk";
-+ compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20018 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll4";
-@@ -91,7 +91,7 @@
-
- pll5: clk@01c20020 {
- #clock-cells = <1>;
-- compatible = "allwinner,sun4i-pll5-clk";
-+ compatible = "allwinner,sun4i-a10-pll5-clk";
- reg = <0x01c20020 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll5_ddr", "pll5_other";
-@@ -99,7 +99,7 @@
-
- pll6: clk@01c20028 {
- #clock-cells = <1>;
-- compatible = "allwinner,sun4i-pll6-clk";
-+ compatible = "allwinner,sun4i-a10-pll6-clk";
- reg = <0x01c20028 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll6_sata", "pll6_other", "pll6";
-@@ -108,7 +108,7 @@
- /* dummy is 200M */
- cpu: cpu@01c20054 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-cpu-clk";
-+ compatible = "allwinner,sun4i-a10-cpu-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
- clock-output-names = "cpu";
-@@ -116,7 +116,7 @@
-
- axi: axi@01c20054 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-axi-clk";
-+ compatible = "allwinner,sun4i-a10-axi-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&cpu>;
- clock-output-names = "axi";
-@@ -124,7 +124,7 @@
-
- axi_gates: clk@01c2005c {
- #clock-cells = <1>;
-- compatible = "allwinner,sun4i-axi-gates-clk";
-+ compatible = "allwinner,sun4i-a10-axi-gates-clk";
- reg = <0x01c2005c 0x4>;
- clocks = <&axi>;
- clock-output-names = "axi_dram";
-@@ -132,7 +132,7 @@
-
- ahb: ahb@01c20054 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-ahb-clk";
-+ compatible = "allwinner,sun4i-a10-ahb-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&axi>;
- clock-output-names = "ahb";
-@@ -140,7 +140,7 @@
-
- ahb_gates: clk@01c20060 {
- #clock-cells = <1>;
-- compatible = "allwinner,sun4i-ahb-gates-clk";
-+ compatible = "allwinner,sun4i-a10-ahb-gates-clk";
- reg = <0x01c20060 0x8>;
- clocks = <&ahb>;
- clock-output-names = "ahb_usb0", "ahb_ehci0",
-@@ -158,7 +158,7 @@
-
- apb0: apb0@01c20054 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-apb0-clk";
-+ compatible = "allwinner,sun4i-a10-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb>;
- clock-output-names = "apb0";
-@@ -166,7 +166,7 @@
-
- apb0_gates: clk@01c20068 {
- #clock-cells = <1>;
-- compatible = "allwinner,sun4i-apb0-gates-clk";
-+ compatible = "allwinner,sun4i-a10-apb0-gates-clk";
- reg = <0x01c20068 0x4>;
- clocks = <&apb0>;
- clock-output-names = "apb0_codec", "apb0_spdif",
-@@ -176,7 +176,7 @@
-
- apb1_mux: apb1_mux@01c20058 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-apb1-mux-clk";
-+ compatible = "allwinner,sun4i-a10-apb1-mux-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
- clock-output-names = "apb1_mux";
-@@ -184,7 +184,7 @@
-
- apb1: apb1@01c20058 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-apb1-clk";
-+ compatible = "allwinner,sun4i-a10-apb1-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&apb1_mux>;
- clock-output-names = "apb1";
-@@ -192,7 +192,7 @@
-
- apb1_gates: clk@01c2006c {
- #clock-cells = <1>;
-- compatible = "allwinner,sun4i-apb1-gates-clk";
-+ compatible = "allwinner,sun4i-a10-apb1-gates-clk";
- reg = <0x01c2006c 0x4>;
- clocks = <&apb1>;
- clock-output-names = "apb1_i2c0", "apb1_i2c1",
-@@ -205,7 +205,7 @@
-
- nand_clk: clk@01c20080 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20080 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "nand";
-@@ -213,7 +213,7 @@
-
- ms_clk: clk@01c20084 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20084 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ms";
-@@ -221,7 +221,7 @@
-
- mmc0_clk: clk@01c20088 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc0";
-@@ -229,7 +229,7 @@
-
- mmc1_clk: clk@01c2008c {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc1";
-@@ -237,7 +237,7 @@
-
- mmc2_clk: clk@01c20090 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc2";
-@@ -245,7 +245,7 @@
-
- mmc3_clk: clk@01c20094 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20094 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc3";
-@@ -253,7 +253,7 @@
-
- ts_clk: clk@01c20098 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20098 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ts";
-@@ -261,7 +261,7 @@
-
- ss_clk: clk@01c2009c {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2009c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ss";
-@@ -269,7 +269,7 @@
-
- spi0_clk: clk@01c200a0 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi0";
-@@ -277,7 +277,7 @@
-
- spi1_clk: clk@01c200a4 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi1";
-@@ -285,7 +285,7 @@
-
- spi2_clk: clk@01c200a8 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a8 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi2";
-@@ -293,7 +293,7 @@
-
- pata_clk: clk@01c200ac {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200ac 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "pata";
-@@ -301,7 +301,7 @@
-
- ir0_clk: clk@01c200b0 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir0";
-@@ -309,7 +309,7 @@
-
- ir1_clk: clk@01c200b4 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir1";
-@@ -326,7 +326,7 @@
-
- spi3_clk: clk@01c200d4 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200d4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi3";
---- a/arch/arm/boot/dts/sun5i-a10s.dtsi
-+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
-@@ -49,7 +49,7 @@
-
- osc24M: clk@01c20050 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-osc-clk";
-+ compatible = "allwinner,sun4i-a10-osc-clk";
- reg = <0x01c20050 0x4>;
- clock-frequency = <24000000>;
- clock-output-names = "osc24M";
-@@ -64,7 +64,7 @@
-
- pll1: clk@01c20000 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-pll1-clk";
-+ compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll1";
-@@ -72,7 +72,7 @@
-
- pll4: clk@01c20018 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-pll1-clk";
-+ compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20018 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll4";
-@@ -80,7 +80,7 @@
-
- pll5: clk@01c20020 {
- #clock-cells = <1>;
-- compatible = "allwinner,sun4i-pll5-clk";
-+ compatible = "allwinner,sun4i-a10-pll5-clk";
- reg = <0x01c20020 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll5_ddr", "pll5_other";
-@@ -88,7 +88,7 @@
-
- pll6: clk@01c20028 {
- #clock-cells = <1>;
-- compatible = "allwinner,sun4i-pll6-clk";
-+ compatible = "allwinner,sun4i-a10-pll6-clk";
- reg = <0x01c20028 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll6_sata", "pll6_other", "pll6";
-@@ -97,7 +97,7 @@
- /* dummy is 200M */
- cpu: cpu@01c20054 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-cpu-clk";
-+ compatible = "allwinner,sun4i-a10-cpu-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
- clock-output-names = "cpu";
-@@ -105,7 +105,7 @@
-
- axi: axi@01c20054 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-axi-clk";
-+ compatible = "allwinner,sun4i-a10-axi-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&cpu>;
- clock-output-names = "axi";
-@@ -113,7 +113,7 @@
-
- axi_gates: clk@01c2005c {
- #clock-cells = <1>;
-- compatible = "allwinner,sun4i-axi-gates-clk";
-+ compatible = "allwinner,sun4i-a10-axi-gates-clk";
- reg = <0x01c2005c 0x4>;
- clocks = <&axi>;
- clock-output-names = "axi_dram";
-@@ -121,7 +121,7 @@
-
- ahb: ahb@01c20054 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-ahb-clk";
-+ compatible = "allwinner,sun4i-a10-ahb-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&axi>;
- clock-output-names = "ahb";
-@@ -143,7 +143,7 @@
-
- apb0: apb0@01c20054 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-apb0-clk";
-+ compatible = "allwinner,sun4i-a10-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb>;
- clock-output-names = "apb0";
-@@ -160,7 +160,7 @@
-
- apb1_mux: apb1_mux@01c20058 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-apb1-mux-clk";
-+ compatible = "allwinner,sun4i-a10-apb1-mux-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
- clock-output-names = "apb1_mux";
-@@ -168,7 +168,7 @@
-
- apb1: apb1@01c20058 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-apb1-clk";
-+ compatible = "allwinner,sun4i-a10-apb1-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&apb1_mux>;
- clock-output-names = "apb1";
-@@ -186,7 +186,7 @@
-
- nand_clk: clk@01c20080 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20080 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "nand";
-@@ -194,7 +194,7 @@
-
- ms_clk: clk@01c20084 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20084 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ms";
-@@ -202,7 +202,7 @@
-
- mmc0_clk: clk@01c20088 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc0";
-@@ -210,7 +210,7 @@
-
- mmc1_clk: clk@01c2008c {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc1";
-@@ -218,7 +218,7 @@
-
- mmc2_clk: clk@01c20090 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc2";
-@@ -226,7 +226,7 @@
-
- ts_clk: clk@01c20098 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20098 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ts";
-@@ -234,7 +234,7 @@
-
- ss_clk: clk@01c2009c {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2009c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ss";
-@@ -242,7 +242,7 @@
-
- spi0_clk: clk@01c200a0 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi0";
-@@ -250,7 +250,7 @@
-
- spi1_clk: clk@01c200a4 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi1";
-@@ -258,7 +258,7 @@
-
- spi2_clk: clk@01c200a8 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a8 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi2";
-@@ -266,7 +266,7 @@
-
- ir0_clk: clk@01c200b0 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir0";
-@@ -283,7 +283,7 @@
-
- mbus_clk: clk@01c2015c {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2015c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mbus";
---- a/arch/arm/boot/dts/sun5i-a13.dtsi
-+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
-@@ -54,7 +54,7 @@
-
- osc24M: clk@01c20050 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-osc-clk";
-+ compatible = "allwinner,sun4i-a10-osc-clk";
- reg = <0x01c20050 0x4>;
- clock-frequency = <24000000>;
- clock-output-names = "osc24M";
-@@ -69,7 +69,7 @@
-
- pll1: clk@01c20000 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-pll1-clk";
-+ compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll1";
-@@ -77,7 +77,7 @@
-
- pll4: clk@01c20018 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-pll1-clk";
-+ compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20018 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll4";
-@@ -85,7 +85,7 @@
-
- pll5: clk@01c20020 {
- #clock-cells = <1>;
-- compatible = "allwinner,sun4i-pll5-clk";
-+ compatible = "allwinner,sun4i-a10-pll5-clk";
- reg = <0x01c20020 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll5_ddr", "pll5_other";
-@@ -93,7 +93,7 @@
-
- pll6: clk@01c20028 {
- #clock-cells = <1>;
-- compatible = "allwinner,sun4i-pll6-clk";
-+ compatible = "allwinner,sun4i-a10-pll6-clk";
- reg = <0x01c20028 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll6_sata", "pll6_other", "pll6";
-@@ -102,7 +102,7 @@
- /* dummy is 200M */
- cpu: cpu@01c20054 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-cpu-clk";
-+ compatible = "allwinner,sun4i-a10-cpu-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
- clock-output-names = "cpu";
-@@ -110,7 +110,7 @@
-
- axi: axi@01c20054 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-axi-clk";
-+ compatible = "allwinner,sun4i-a10-axi-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&cpu>;
- clock-output-names = "axi";
-@@ -118,7 +118,7 @@
-
- axi_gates: clk@01c2005c {
- #clock-cells = <1>;
-- compatible = "allwinner,sun4i-axi-gates-clk";
-+ compatible = "allwinner,sun4i-a10-axi-gates-clk";
- reg = <0x01c2005c 0x4>;
- clocks = <&axi>;
- clock-output-names = "axi_dram";
-@@ -126,7 +126,7 @@
-
- ahb: ahb@01c20054 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-ahb-clk";
-+ compatible = "allwinner,sun4i-a10-ahb-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&axi>;
- clock-output-names = "ahb";
-@@ -147,7 +147,7 @@
-
- apb0: apb0@01c20054 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-apb0-clk";
-+ compatible = "allwinner,sun4i-a10-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb>;
- clock-output-names = "apb0";
-@@ -163,7 +163,7 @@
-
- apb1_mux: apb1_mux@01c20058 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-apb1-mux-clk";
-+ compatible = "allwinner,sun4i-a10-apb1-mux-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
- clock-output-names = "apb1_mux";
-@@ -171,7 +171,7 @@
-
- apb1: apb1@01c20058 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-apb1-clk";
-+ compatible = "allwinner,sun4i-a10-apb1-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&apb1_mux>;
- clock-output-names = "apb1";
-@@ -188,7 +188,7 @@
-
- nand_clk: clk@01c20080 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20080 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "nand";
-@@ -196,7 +196,7 @@
-
- ms_clk: clk@01c20084 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20084 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ms";
-@@ -204,7 +204,7 @@
-
- mmc0_clk: clk@01c20088 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc0";
-@@ -212,7 +212,7 @@
-
- mmc1_clk: clk@01c2008c {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc1";
-@@ -220,7 +220,7 @@
-
- mmc2_clk: clk@01c20090 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc2";
-@@ -228,7 +228,7 @@
-
- ts_clk: clk@01c20098 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20098 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ts";
-@@ -236,7 +236,7 @@
-
- ss_clk: clk@01c2009c {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2009c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ss";
-@@ -244,7 +244,7 @@
-
- spi0_clk: clk@01c200a0 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi0";
-@@ -252,7 +252,7 @@
-
- spi1_clk: clk@01c200a4 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi1";
-@@ -260,7 +260,7 @@
-
- spi2_clk: clk@01c200a8 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a8 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi2";
-@@ -268,7 +268,7 @@
-
- ir0_clk: clk@01c200b0 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir0";
-@@ -285,7 +285,7 @@
-
- mbus_clk: clk@01c2015c {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2015c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mbus";
---- a/arch/arm/boot/dts/sun6i-a31.dtsi
-+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
-@@ -95,7 +95,7 @@
-
- cpu: cpu@01c20050 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-cpu-clk";
-+ compatible = "allwinner,sun4i-a10-cpu-clk";
- reg = <0x01c20050 0x4>;
-
- /*
-@@ -110,7 +110,7 @@
-
- axi: axi@01c20050 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-axi-clk";
-+ compatible = "allwinner,sun4i-a10-axi-clk";
- reg = <0x01c20050 0x4>;
- clocks = <&cpu>;
- clock-output-names = "axi";
-@@ -126,7 +126,7 @@
-
- ahb1: ahb1@01c20054 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-ahb-clk";
-+ compatible = "allwinner,sun4i-a10-ahb-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb1_mux>;
- clock-output-names = "ahb1";
-@@ -155,7 +155,7 @@
-
- apb1: apb1@01c20054 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-apb0-clk";
-+ compatible = "allwinner,sun4i-a10-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb1>;
- clock-output-names = "apb1";
-@@ -173,7 +173,7 @@
-
- apb2_mux: apb2_mux@01c20058 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-apb1-mux-clk";
-+ compatible = "allwinner,sun4i-a10-apb1-mux-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
- clock-output-names = "apb2_mux";
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -64,7 +64,7 @@
-
- osc24M: clk@01c20050 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-osc-clk";
-+ compatible = "allwinner,sun4i-a10-osc-clk";
- reg = <0x01c20050 0x4>;
- clock-frequency = <24000000>;
- clock-output-names = "osc24M";
-@@ -79,7 +79,7 @@
-
- pll1: clk@01c20000 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-pll1-clk";
-+ compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll1";
-@@ -87,7 +87,7 @@
-
- pll4: clk@01c20018 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-pll1-clk";
-+ compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20018 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll4";
-@@ -95,7 +95,7 @@
-
- pll5: clk@01c20020 {
- #clock-cells = <1>;
-- compatible = "allwinner,sun4i-pll5-clk";
-+ compatible = "allwinner,sun4i-a10-pll5-clk";
- reg = <0x01c20020 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll5_ddr", "pll5_other";
-@@ -103,7 +103,7 @@
-
- pll6: clk@01c20028 {
- #clock-cells = <1>;
-- compatible = "allwinner,sun4i-pll6-clk";
-+ compatible = "allwinner,sun4i-a10-pll6-clk";
- reg = <0x01c20028 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll6_sata", "pll6_other", "pll6";
-@@ -111,7 +111,7 @@
-
- cpu: cpu@01c20054 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-cpu-clk";
-+ compatible = "allwinner,sun4i-a10-cpu-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>;
- clock-output-names = "cpu";
-@@ -119,7 +119,7 @@
-
- axi: axi@01c20054 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-axi-clk";
-+ compatible = "allwinner,sun4i-a10-axi-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&cpu>;
- clock-output-names = "axi";
-@@ -127,7 +127,7 @@
-
- ahb: ahb@01c20054 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-ahb-clk";
-+ compatible = "allwinner,sun4i-a10-ahb-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&axi>;
- clock-output-names = "ahb";
-@@ -155,7 +155,7 @@
-
- apb0: apb0@01c20054 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-apb0-clk";
-+ compatible = "allwinner,sun4i-a10-apb0-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&ahb>;
- clock-output-names = "apb0";
-@@ -174,7 +174,7 @@
-
- apb1_mux: apb1_mux@01c20058 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-apb1-mux-clk";
-+ compatible = "allwinner,sun4i-a10-apb1-mux-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
- clock-output-names = "apb1_mux";
-@@ -182,7 +182,7 @@
-
- apb1: apb1@01c20058 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-apb1-clk";
-+ compatible = "allwinner,sun4i-a10-apb1-clk";
- reg = <0x01c20058 0x4>;
- clocks = <&apb1_mux>;
- clock-output-names = "apb1";
-@@ -203,7 +203,7 @@
-
- nand_clk: clk@01c20080 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20080 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "nand";
-@@ -211,7 +211,7 @@
-
- ms_clk: clk@01c20084 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20084 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ms";
-@@ -219,7 +219,7 @@
-
- mmc0_clk: clk@01c20088 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc0";
-@@ -227,7 +227,7 @@
-
- mmc1_clk: clk@01c2008c {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc1";
-@@ -235,7 +235,7 @@
-
- mmc2_clk: clk@01c20090 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc2";
-@@ -243,7 +243,7 @@
-
- mmc3_clk: clk@01c20094 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20094 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc3";
-@@ -251,7 +251,7 @@
-
- ts_clk: clk@01c20098 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c20098 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ts";
-@@ -259,7 +259,7 @@
-
- ss_clk: clk@01c2009c {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2009c 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ss";
-@@ -267,7 +267,7 @@
-
- spi0_clk: clk@01c200a0 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi0";
-@@ -275,7 +275,7 @@
-
- spi1_clk: clk@01c200a4 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi1";
-@@ -283,7 +283,7 @@
-
- spi2_clk: clk@01c200a8 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200a8 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi2";
-@@ -291,7 +291,7 @@
-
- pata_clk: clk@01c200ac {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200ac 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "pata";
-@@ -299,7 +299,7 @@
-
- ir0_clk: clk@01c200b0 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b0 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir0";
-@@ -307,7 +307,7 @@
-
- ir1_clk: clk@01c200b4 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200b4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "ir1";
-@@ -324,7 +324,7 @@
-
- spi3_clk: clk@01c200d4 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c200d4 0x4>;
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "spi3";
-@@ -332,7 +332,7 @@
-
- mbus_clk: clk@01c2015c {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-mod0-clk";
-+ compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01c2015c 0x4>;
- clocks = <&osc24M>, <&pll6 2>, <&pll5 1>;
- clock-output-names = "mbus";
diff --git a/target/linux/sunxi/patches-3.14/141-dt-sunxi-add-common-regulator-include.patch b/target/linux/sunxi/patches-3.14/141-dt-sunxi-add-common-regulator-include.patch
deleted file mode 100644
index 32f4f72a9b..0000000000
--- a/target/linux/sunxi/patches-3.14/141-dt-sunxi-add-common-regulator-include.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From 6e763a8ebe7a16ae5635ade146fd2930749ed775 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Sat, 1 Mar 2014 14:57:56 +0100
-Subject: [PATCH] ARM: sunxi: dt: Add sunxi-common-regulators include file
-
-Most sunxi boards with a sata connector also have a gpio controlled connector
-for sata target power and almost all sunxi boards have a gpio controlled vbus
-for usb1 and usb2.
-
-This commit adds an include file for the regulators representing these
-supplies, avoiding the need to copy and paste the regulator code to allmost
-all sunxi board dts files.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sunxi-common-regulators.dtsi | 75 ++++++++++++++++++++++++++
- 1 file changed, 75 insertions(+)
- create mode 100644 arch/arm/boot/dts/sunxi-common-regulators.dtsi
-
---- /dev/null
-+++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
-@@ -0,0 +1,75 @@
-+/*
-+ * sunxi boards common regulator (ahci target power supply, usb-vbus) code
-+ *
-+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/ {
-+ soc@01c00000 {
-+ pio: pinctrl@01c20800 {
-+ ahci_pwr_pin_a: ahci_pwr_pin@0 {
-+ allwinner,pins = "PB8";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
-+
-+ usb1_vbus_pin_a: usb1_vbus_pin@0 {
-+ allwinner,pins = "PH6";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
-+
-+ usb2_vbus_pin_a: usb2_vbus_pin@0 {
-+ allwinner,pins = "PH3";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
-+ };
-+ };
-+
-+ reg_ahci_5v: ahci-5v {
-+ compatible = "regulator-fixed";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&ahci_pwr_pin_a>;
-+ regulator-name = "ahci-5v";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ enable-active-high;
-+ gpio = <&pio 1 8 0>;
-+ status = "disabled";
-+ };
-+
-+ reg_usb1_vbus: usb1-vbus {
-+ compatible = "regulator-fixed";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&usb1_vbus_pin_a>;
-+ regulator-name = "usb1-vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ enable-active-high;
-+ gpio = <&pio 7 6 0>;
-+ status = "disabled";
-+ };
-+
-+ reg_usb2_vbus: usb2-vbus {
-+ compatible = "regulator-fixed";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&usb2_vbus_pin_a>;
-+ regulator-name = "usb2-vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ enable-active-high;
-+ gpio = <&pio 7 3 0>;
-+ status = "disabled";
-+ };
-+};
diff --git a/target/linux/sunxi/patches-3.14/145-1-dt-sun7i-add-a20-spi.patch b/target/linux/sunxi/patches-3.14/145-1-dt-sun7i-add-a20-spi.patch
deleted file mode 100644
index 9f8f00c6f8..0000000000
--- a/target/linux/sunxi/patches-3.14/145-1-dt-sun7i-add-a20-spi.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From c9bfaadf8973cb4d9074e80c4bf8708deca62712 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Sat, 22 Feb 2014 22:35:54 +0100
-Subject: [PATCH] ARM: dt: sun7i: Add A20 SPI controller nodes
-
-The A20 has 4 SPI controllers compatible with the one found in the A10. Add
-them in the DT.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun7i-a20.dtsi | 44 ++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 44 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -401,6 +401,28 @@
- #size-cells = <1>;
- ranges;
-
-+ spi0: spi@01c05000 {
-+ compatible = "allwinner,sun4i-a10-spi";
-+ reg = <0x01c05000 0x1000>;
-+ interrupts = <0 10 4>;
-+ clocks = <&ahb_gates 20>, <&spi0_clk>;
-+ clock-names = "ahb", "mod";
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
-+ spi1: spi@01c06000 {
-+ compatible = "allwinner,sun4i-a10-spi";
-+ reg = <0x01c06000 0x1000>;
-+ interrupts = <0 11 4>;
-+ clocks = <&ahb_gates 21>, <&spi1_clk>;
-+ clock-names = "ahb", "mod";
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
- emac: ethernet@01c0b000 {
- compatible = "allwinner,sun4i-a10-emac";
- reg = <0x01c0b000 0x1000>;
-@@ -417,6 +439,28 @@
- #size-cells = <0>;
- };
-
-+ spi2: spi@01c17000 {
-+ compatible = "allwinner,sun4i-a10-spi";
-+ reg = <0x01c17000 0x1000>;
-+ interrupts = <0 12 4>;
-+ clocks = <&ahb_gates 22>, <&spi2_clk>;
-+ clock-names = "ahb", "mod";
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
-+ spi3: spi@01c1f000 {
-+ compatible = "allwinner,sun4i-a10-spi";
-+ reg = <0x01c1f000 0x1000>;
-+ interrupts = <0 50 4>;
-+ clocks = <&ahb_gates 23>, <&spi3_clk>;
-+ clock-names = "ahb", "mod";
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
- pio: pinctrl@01c20800 {
- compatible = "allwinner,sun7i-a20-pinctrl";
- reg = <0x01c20800 0x400>;
diff --git a/target/linux/sunxi/patches-3.14/145-2-dt-sun4i-add-a10-spi.patch b/target/linux/sunxi/patches-3.14/145-2-dt-sun4i-add-a10-spi.patch
deleted file mode 100644
index 4bc9ea0039..0000000000
--- a/target/linux/sunxi/patches-3.14/145-2-dt-sun4i-add-a10-spi.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From cac3c4d67c80c4895d0d44e609beb535d66af6a3 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Sat, 22 Feb 2014 22:35:55 +0100
-Subject: [PATCH] ARM: dt: sun4i: Add A10 SPI controller nodes
-
-The A10 has 4 SPI controllers that are now supported. Add them in the DT.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun4i-a10.dtsi | 44 ++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 44 insertions(+)
-
---- a/arch/arm/boot/dts/sun4i-a10.dtsi
-+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
-@@ -339,6 +339,28 @@
- #size-cells = <1>;
- ranges;
-
-+ spi0: spi@01c05000 {
-+ compatible = "allwinner,sun4i-a10-spi";
-+ reg = <0x01c05000 0x1000>;
-+ interrupts = <10>;
-+ clocks = <&ahb_gates 20>, <&spi0_clk>;
-+ clock-names = "ahb", "mod";
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
-+ spi1: spi@01c06000 {
-+ compatible = "allwinner,sun4i-a10-spi";
-+ reg = <0x01c06000 0x1000>;
-+ interrupts = <11>;
-+ clocks = <&ahb_gates 21>, <&spi1_clk>;
-+ clock-names = "ahb", "mod";
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
- emac: ethernet@01c0b000 {
- compatible = "allwinner,sun4i-a10-emac";
- reg = <0x01c0b000 0x1000>;
-@@ -355,6 +377,28 @@
- #size-cells = <0>;
- };
-
-+ spi2: spi@01c17000 {
-+ compatible = "allwinner,sun4i-a10-spi";
-+ reg = <0x01c17000 0x1000>;
-+ interrupts = <12>;
-+ clocks = <&ahb_gates 22>, <&spi2_clk>;
-+ clock-names = "ahb", "mod";
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
-+ spi3: spi@01c1f000 {
-+ compatible = "allwinner,sun4i-a10-spi";
-+ reg = <0x01c1f000 0x1000>;
-+ interrupts = <50>;
-+ clocks = <&ahb_gates 23>, <&spi3_clk>;
-+ clock-names = "ahb", "mod";
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
- intc: interrupt-controller@01c20400 {
- compatible = "allwinner,sun4i-ic";
- reg = <0x01c20400 0x400>;
diff --git a/target/linux/sunxi/patches-3.14/145-3-dt-sun5i-add-a13-spi.patch b/target/linux/sunxi/patches-3.14/145-3-dt-sun5i-add-a13-spi.patch
deleted file mode 100644
index 7558d5623e..0000000000
--- a/target/linux/sunxi/patches-3.14/145-3-dt-sun5i-add-a13-spi.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From aeb3b73fc416e14afd25f25e69f8713488edcc1b Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Sat, 22 Feb 2014 22:35:57 +0100
-Subject: [PATCH] ARM: dt: sun5i: Add A13 SPI controller nodes
-
-The A13 has 3 SPI controllers compatible with the one found in the A10. Add
-them in the DT.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun5i-a13.dtsi | 33 +++++++++++++++++++++++++++++++++
- 1 file changed, 33 insertions(+)
-
---- a/arch/arm/boot/dts/sun5i-a13.dtsi
-+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
-@@ -298,6 +298,39 @@
- #size-cells = <1>;
- ranges;
-
-+ spi0: spi@01c05000 {
-+ compatible = "allwinner,sun4i-a10-spi";
-+ reg = <0x01c05000 0x1000>;
-+ interrupts = <10>;
-+ clocks = <&ahb_gates 20>, <&spi0_clk>;
-+ clock-names = "ahb", "mod";
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
-+ spi1: spi@01c06000 {
-+ compatible = "allwinner,sun4i-a10-spi";
-+ reg = <0x01c06000 0x1000>;
-+ interrupts = <11>;
-+ clocks = <&ahb_gates 21>, <&spi1_clk>;
-+ clock-names = "ahb", "mod";
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
-+ spi2: spi@01c17000 {
-+ compatible = "allwinner,sun4i-a10-spi";
-+ reg = <0x01c17000 0x1000>;
-+ interrupts = <12>;
-+ clocks = <&ahb_gates 22>, <&spi2_clk>;
-+ clock-names = "ahb", "mod";
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
- intc: interrupt-controller@01c20400 {
- compatible = "allwinner,sun4i-ic";
- reg = <0x01c20400 0x400>;
diff --git a/target/linux/sunxi/patches-3.14/146-1-spi-add-a31-spi.patch b/target/linux/sunxi/patches-3.14/146-1-spi-add-a31-spi.patch
deleted file mode 100644
index 761ecc18f2..0000000000
--- a/target/linux/sunxi/patches-3.14/146-1-spi-add-a31-spi.patch
+++ /dev/null
@@ -1,559 +0,0 @@
-From 86cb7c7ab176112f8b0031dc7c8d19103ba52277 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Wed, 5 Feb 2014 14:05:05 +0100
-Subject: [PATCH] spi: sunxi: Add Allwinner A31 SPI controller driver
-
-The Allwinner A31 has a new SPI controller IP compared to the older Allwinner
-SoCs.
-
-It supports DMA, but the driver only does PIO for now, and DMA will be
-supported eventually.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- .../devicetree/bindings/spi/spi-sun6i.txt | 24 +
- drivers/spi/Kconfig | 6 +
- drivers/spi/Makefile | 1 +
- drivers/spi/spi-sun6i.c | 483 +++++++++++++++++++++
- 4 files changed, 514 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/spi/spi-sun6i.txt
- create mode 100644 drivers/spi/spi-sun6i.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/spi/spi-sun6i.txt
-@@ -0,0 +1,24 @@
-+Allwinner A31 SPI controller
-+
-+Required properties:
-+- compatible: Should be "allwinner,sun6i-a31-spi".
-+- reg: Should contain register location and length.
-+- interrupts: Should contain interrupt.
-+- clocks: phandle to the clocks feeding the SPI controller. Two are
-+ needed:
-+ - "ahb": the gated AHB parent clock
-+ - "mod": the parent module clock
-+- clock-names: Must contain the clock names described just above
-+- resets: phandle to the reset controller asserting this device in
-+ reset
-+
-+Example:
-+
-+spi1: spi@01c69000 {
-+ compatible = "allwinner,sun6i-a31-spi";
-+ reg = <0x01c69000 0x1000>;
-+ interrupts = <0 66 4>;
-+ clocks = <&ahb1_gates 21>, <&spi1_clk>;
-+ clock-names = "ahb", "mod";
-+ resets = <&ahb1_rst 21>;
-+};
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -455,6 +455,12 @@ config SPI_SIRF
- help
- SPI driver for CSR SiRFprimaII SoCs
-
-+config SPI_SUN6I
-+ tristate "Allwinner A31 SPI controller"
-+ depends on ARCH_SUNXI || COMPILE_TEST
-+ help
-+ This enables using the SPI controller on the Allwinner A31 SoCs.
-+
- config SPI_MXS
- tristate "Freescale MXS SPI controller"
- depends on ARCH_MXS
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -71,6 +71,7 @@ obj-$(CONFIG_SPI_SH_HSPI) += spi-sh-hsp
- obj-$(CONFIG_SPI_SH_MSIOF) += spi-sh-msiof.o
- obj-$(CONFIG_SPI_SH_SCI) += spi-sh-sci.o
- obj-$(CONFIG_SPI_SIRF) += spi-sirf.o
-+obj-$(CONFIG_SPI_SUN6I) += spi-sun6i.o
- obj-$(CONFIG_SPI_TEGRA114) += spi-tegra114.o
- obj-$(CONFIG_SPI_TEGRA20_SFLASH) += spi-tegra20-sflash.o
- obj-$(CONFIG_SPI_TEGRA20_SLINK) += spi-tegra20-slink.o
---- /dev/null
-+++ b/drivers/spi/spi-sun6i.c
-@@ -0,0 +1,483 @@
-+/*
-+ * Copyright (C) 2012 - 2014 Allwinner Tech
-+ * Pan Nan <pannan@allwinnertech.com>
-+ *
-+ * Copyright (C) 2014 Maxime Ripard
-+ * Maxime Ripard <maxime.ripard@free-electrons.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/device.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/pm_runtime.h>
-+#include <linux/reset.h>
-+#include <linux/workqueue.h>
-+
-+#include <linux/spi/spi.h>
-+
-+#define SUN6I_FIFO_DEPTH 128
-+
-+#define SUN6I_GBL_CTL_REG 0x04
-+#define SUN6I_GBL_CTL_BUS_ENABLE BIT(0)
-+#define SUN6I_GBL_CTL_MASTER BIT(1)
-+#define SUN6I_GBL_CTL_TP BIT(7)
-+#define SUN6I_GBL_CTL_RST BIT(31)
-+
-+#define SUN6I_TFR_CTL_REG 0x08
-+#define SUN6I_TFR_CTL_CPHA BIT(0)
-+#define SUN6I_TFR_CTL_CPOL BIT(1)
-+#define SUN6I_TFR_CTL_SPOL BIT(2)
-+#define SUN6I_TFR_CTL_CS_MASK 0x3
-+#define SUN6I_TFR_CTL_CS(cs) (((cs) & SUN6I_TFR_CTL_CS_MASK) << 4)
-+#define SUN6I_TFR_CTL_CS_MANUAL BIT(6)
-+#define SUN6I_TFR_CTL_CS_LEVEL BIT(7)
-+#define SUN6I_TFR_CTL_DHB BIT(8)
-+#define SUN6I_TFR_CTL_FBS BIT(12)
-+#define SUN6I_TFR_CTL_XCH BIT(31)
-+
-+#define SUN6I_INT_CTL_REG 0x10
-+#define SUN6I_INT_CTL_RF_OVF BIT(8)
-+#define SUN6I_INT_CTL_TC BIT(12)
-+
-+#define SUN6I_INT_STA_REG 0x14
-+
-+#define SUN6I_FIFO_CTL_REG 0x18
-+#define SUN6I_FIFO_CTL_RF_RST BIT(15)
-+#define SUN6I_FIFO_CTL_TF_RST BIT(31)
-+
-+#define SUN6I_FIFO_STA_REG 0x1c
-+#define SUN6I_FIFO_STA_RF_CNT_MASK 0x7f
-+#define SUN6I_FIFO_STA_RF_CNT_BITS 0
-+#define SUN6I_FIFO_STA_TF_CNT_MASK 0x7f
-+#define SUN6I_FIFO_STA_TF_CNT_BITS 16
-+
-+#define SUN6I_CLK_CTL_REG 0x24
-+#define SUN6I_CLK_CTL_CDR2_MASK 0xff
-+#define SUN6I_CLK_CTL_CDR2(div) (((div) & SUN6I_CLK_CTL_CDR2_MASK) << 0)
-+#define SUN6I_CLK_CTL_CDR1_MASK 0xf
-+#define SUN6I_CLK_CTL_CDR1(div) (((div) & SUN6I_CLK_CTL_CDR1_MASK) << 8)
-+#define SUN6I_CLK_CTL_DRS BIT(12)
-+
-+#define SUN6I_BURST_CNT_REG 0x30
-+#define SUN6I_BURST_CNT(cnt) ((cnt) & 0xffffff)
-+
-+#define SUN6I_XMIT_CNT_REG 0x34
-+#define SUN6I_XMIT_CNT(cnt) ((cnt) & 0xffffff)
-+
-+#define SUN6I_BURST_CTL_CNT_REG 0x38
-+#define SUN6I_BURST_CTL_CNT_STC(cnt) ((cnt) & 0xffffff)
-+
-+#define SUN6I_TXDATA_REG 0x200
-+#define SUN6I_RXDATA_REG 0x300
-+
-+struct sun6i_spi {
-+ struct spi_master *master;
-+ void __iomem *base_addr;
-+ struct clk *hclk;
-+ struct clk *mclk;
-+ struct reset_control *rstc;
-+
-+ struct completion done;
-+
-+ const u8 *tx_buf;
-+ u8 *rx_buf;
-+ int len;
-+};
-+
-+static inline u32 sun6i_spi_read(struct sun6i_spi *sspi, u32 reg)
-+{
-+ return readl(sspi->base_addr + reg);
-+}
-+
-+static inline void sun6i_spi_write(struct sun6i_spi *sspi, u32 reg, u32 value)
-+{
-+ writel(value, sspi->base_addr + reg);
-+}
-+
-+static inline void sun6i_spi_drain_fifo(struct sun6i_spi *sspi, int len)
-+{
-+ u32 reg, cnt;
-+ u8 byte;
-+
-+ /* See how much data is available */
-+ reg = sun6i_spi_read(sspi, SUN6I_FIFO_STA_REG);
-+ reg &= SUN6I_FIFO_STA_RF_CNT_MASK;
-+ cnt = reg >> SUN6I_FIFO_STA_RF_CNT_BITS;
-+
-+ if (len > cnt)
-+ len = cnt;
-+
-+ while (len--) {
-+ byte = readb(sspi->base_addr + SUN6I_RXDATA_REG);
-+ if (sspi->rx_buf)
-+ *sspi->rx_buf++ = byte;
-+ }
-+}
-+
-+static inline void sun6i_spi_fill_fifo(struct sun6i_spi *sspi, int len)
-+{
-+ u8 byte;
-+
-+ if (len > sspi->len)
-+ len = sspi->len;
-+
-+ while (len--) {
-+ byte = sspi->tx_buf ? *sspi->tx_buf++ : 0;
-+ writeb(byte, sspi->base_addr + SUN6I_TXDATA_REG);
-+ sspi->len--;
-+ }
-+}
-+
-+static void sun6i_spi_set_cs(struct spi_device *spi, bool enable)
-+{
-+ struct sun6i_spi *sspi = spi_master_get_devdata(spi->master);
-+ u32 reg;
-+
-+ reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG);
-+ reg &= ~SUN6I_TFR_CTL_CS_MASK;
-+ reg |= SUN6I_TFR_CTL_CS(spi->chip_select);
-+
-+ if (enable)
-+ reg |= SUN6I_TFR_CTL_CS_LEVEL;
-+ else
-+ reg &= ~SUN6I_TFR_CTL_CS_LEVEL;
-+
-+ sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg);
-+}
-+
-+
-+static int sun6i_spi_transfer_one(struct spi_master *master,
-+ struct spi_device *spi,
-+ struct spi_transfer *tfr)
-+{
-+ struct sun6i_spi *sspi = spi_master_get_devdata(master);
-+ unsigned int mclk_rate, div, timeout;
-+ unsigned int tx_len = 0;
-+ int ret = 0;
-+ u32 reg;
-+
-+ /* We don't support transfer larger than the FIFO */
-+ if (tfr->len > SUN6I_FIFO_DEPTH)
-+ return -EINVAL;
-+
-+ reinit_completion(&sspi->done);
-+ sspi->tx_buf = tfr->tx_buf;
-+ sspi->rx_buf = tfr->rx_buf;
-+ sspi->len = tfr->len;
-+
-+ /* Clear pending interrupts */
-+ sun6i_spi_write(sspi, SUN6I_INT_STA_REG, ~0);
-+
-+ /* Reset FIFO */
-+ sun6i_spi_write(sspi, SUN6I_FIFO_CTL_REG,
-+ SUN6I_FIFO_CTL_RF_RST | SUN6I_FIFO_CTL_TF_RST);
-+
-+ /*
-+ * Setup the transfer control register: Chip Select,
-+ * polarities, etc.
-+ */
-+ reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG);
-+
-+ if (spi->mode & SPI_CPOL)
-+ reg |= SUN6I_TFR_CTL_CPOL;
-+ else
-+ reg &= ~SUN6I_TFR_CTL_CPOL;
-+
-+ if (spi->mode & SPI_CPHA)
-+ reg |= SUN6I_TFR_CTL_CPHA;
-+ else
-+ reg &= ~SUN6I_TFR_CTL_CPHA;
-+
-+ if (spi->mode & SPI_LSB_FIRST)
-+ reg |= SUN6I_TFR_CTL_FBS;
-+ else
-+ reg &= ~SUN6I_TFR_CTL_FBS;
-+
-+ /*
-+ * If it's a TX only transfer, we don't want to fill the RX
-+ * FIFO with bogus data
-+ */
-+ if (sspi->rx_buf)
-+ reg &= ~SUN6I_TFR_CTL_DHB;
-+ else
-+ reg |= SUN6I_TFR_CTL_DHB;
-+
-+ /* We want to control the chip select manually */
-+ reg |= SUN6I_TFR_CTL_CS_MANUAL;
-+
-+ sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg);
-+
-+ /* Ensure that we have a parent clock fast enough */
-+ mclk_rate = clk_get_rate(sspi->mclk);
-+ if (mclk_rate < (2 * spi->max_speed_hz)) {
-+ clk_set_rate(sspi->mclk, 2 * spi->max_speed_hz);
-+ mclk_rate = clk_get_rate(sspi->mclk);
-+ }
-+
-+ /*
-+ * Setup clock divider.
-+ *
-+ * We have two choices there. Either we can use the clock
-+ * divide rate 1, which is calculated thanks to this formula:
-+ * SPI_CLK = MOD_CLK / (2 ^ cdr)
-+ * Or we can use CDR2, which is calculated with the formula:
-+ * SPI_CLK = MOD_CLK / (2 * (cdr + 1))
-+ * Wether we use the former or the latter is set through the
-+ * DRS bit.
-+ *
-+ * First try CDR2, and if we can't reach the expected
-+ * frequency, fall back to CDR1.
-+ */
-+ div = mclk_rate / (2 * spi->max_speed_hz);
-+ if (div <= (SUN6I_CLK_CTL_CDR2_MASK + 1)) {
-+ if (div > 0)
-+ div--;
-+
-+ reg = SUN6I_CLK_CTL_CDR2(div) | SUN6I_CLK_CTL_DRS;
-+ } else {
-+ div = ilog2(mclk_rate) - ilog2(spi->max_speed_hz);
-+ reg = SUN6I_CLK_CTL_CDR1(div);
-+ }
-+
-+ sun6i_spi_write(sspi, SUN6I_CLK_CTL_REG, reg);
-+
-+ /* Setup the transfer now... */
-+ if (sspi->tx_buf)
-+ tx_len = tfr->len;
-+
-+ /* Setup the counters */
-+ sun6i_spi_write(sspi, SUN6I_BURST_CNT_REG, SUN6I_BURST_CNT(tfr->len));
-+ sun6i_spi_write(sspi, SUN6I_XMIT_CNT_REG, SUN6I_XMIT_CNT(tx_len));
-+ sun6i_spi_write(sspi, SUN6I_BURST_CTL_CNT_REG,
-+ SUN6I_BURST_CTL_CNT_STC(tx_len));
-+
-+ /* Fill the TX FIFO */
-+ sun6i_spi_fill_fifo(sspi, SUN6I_FIFO_DEPTH);
-+
-+ /* Enable the interrupts */
-+ sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, SUN6I_INT_CTL_TC);
-+
-+ /* Start the transfer */
-+ reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG);
-+ sun6i_spi_write(sspi, SUN6I_TFR_CTL_REG, reg | SUN6I_TFR_CTL_XCH);
-+
-+ timeout = wait_for_completion_timeout(&sspi->done,
-+ msecs_to_jiffies(1000));
-+ if (!timeout) {
-+ ret = -ETIMEDOUT;
-+ goto out;
-+ }
-+
-+ sun6i_spi_drain_fifo(sspi, SUN6I_FIFO_DEPTH);
-+
-+out:
-+ sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, 0);
-+
-+ return ret;
-+}
-+
-+static irqreturn_t sun6i_spi_handler(int irq, void *dev_id)
-+{
-+ struct sun6i_spi *sspi = dev_id;
-+ u32 status = sun6i_spi_read(sspi, SUN6I_INT_STA_REG);
-+
-+ /* Transfer complete */
-+ if (status & SUN6I_INT_CTL_TC) {
-+ sun6i_spi_write(sspi, SUN6I_INT_STA_REG, SUN6I_INT_CTL_TC);
-+ complete(&sspi->done);
-+ return IRQ_HANDLED;
-+ }
-+
-+ return IRQ_NONE;
-+}
-+
-+static int sun6i_spi_runtime_resume(struct device *dev)
-+{
-+ struct spi_master *master = dev_get_drvdata(dev);
-+ struct sun6i_spi *sspi = spi_master_get_devdata(master);
-+ int ret;
-+
-+ ret = clk_prepare_enable(sspi->hclk);
-+ if (ret) {
-+ dev_err(dev, "Couldn't enable AHB clock\n");
-+ goto out;
-+ }
-+
-+ ret = clk_prepare_enable(sspi->mclk);
-+ if (ret) {
-+ dev_err(dev, "Couldn't enable module clock\n");
-+ goto err;
-+ }
-+
-+ ret = reset_control_deassert(sspi->rstc);
-+ if (ret) {
-+ dev_err(dev, "Couldn't deassert the device from reset\n");
-+ goto err2;
-+ }
-+
-+ sun6i_spi_write(sspi, SUN6I_GBL_CTL_REG,
-+ SUN6I_GBL_CTL_BUS_ENABLE | SUN6I_GBL_CTL_MASTER | SUN6I_GBL_CTL_TP);
-+
-+ return 0;
-+
-+err2:
-+ clk_disable_unprepare(sspi->mclk);
-+err:
-+ clk_disable_unprepare(sspi->hclk);
-+out:
-+ return ret;
-+}
-+
-+static int sun6i_spi_runtime_suspend(struct device *dev)
-+{
-+ struct spi_master *master = dev_get_drvdata(dev);
-+ struct sun6i_spi *sspi = spi_master_get_devdata(master);
-+
-+ reset_control_assert(sspi->rstc);
-+ clk_disable_unprepare(sspi->mclk);
-+ clk_disable_unprepare(sspi->hclk);
-+
-+ return 0;
-+}
-+
-+static int sun6i_spi_probe(struct platform_device *pdev)
-+{
-+ struct spi_master *master;
-+ struct sun6i_spi *sspi;
-+ struct resource *res;
-+ int ret = 0, irq;
-+
-+ master = spi_alloc_master(&pdev->dev, sizeof(struct sun6i_spi));
-+ if (!master) {
-+ dev_err(&pdev->dev, "Unable to allocate SPI Master\n");
-+ return -ENOMEM;
-+ }
-+
-+ platform_set_drvdata(pdev, master);
-+ sspi = spi_master_get_devdata(master);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ sspi->base_addr = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(sspi->base_addr)) {
-+ ret = PTR_ERR(sspi->base_addr);
-+ goto err_free_master;
-+ }
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0) {
-+ dev_err(&pdev->dev, "No spi IRQ specified\n");
-+ ret = -ENXIO;
-+ goto err_free_master;
-+ }
-+
-+ ret = devm_request_irq(&pdev->dev, irq, sun6i_spi_handler,
-+ 0, "sun6i-spi", sspi);
-+ if (ret) {
-+ dev_err(&pdev->dev, "Cannot request IRQ\n");
-+ goto err_free_master;
-+ }
-+
-+ sspi->master = master;
-+ master->set_cs = sun6i_spi_set_cs;
-+ master->transfer_one = sun6i_spi_transfer_one;
-+ master->num_chipselect = 4;
-+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
-+ master->dev.of_node = pdev->dev.of_node;
-+ master->auto_runtime_pm = true;
-+
-+ sspi->hclk = devm_clk_get(&pdev->dev, "ahb");
-+ if (IS_ERR(sspi->hclk)) {
-+ dev_err(&pdev->dev, "Unable to acquire AHB clock\n");
-+ ret = PTR_ERR(sspi->hclk);
-+ goto err_free_master;
-+ }
-+
-+ sspi->mclk = devm_clk_get(&pdev->dev, "mod");
-+ if (IS_ERR(sspi->mclk)) {
-+ dev_err(&pdev->dev, "Unable to acquire module clock\n");
-+ ret = PTR_ERR(sspi->mclk);
-+ goto err_free_master;
-+ }
-+
-+ init_completion(&sspi->done);
-+
-+ sspi->rstc = devm_reset_control_get(&pdev->dev, NULL);
-+ if (IS_ERR(sspi->rstc)) {
-+ dev_err(&pdev->dev, "Couldn't get reset controller\n");
-+ ret = PTR_ERR(sspi->rstc);
-+ goto err_free_master;
-+ }
-+
-+ /*
-+ * This wake-up/shutdown pattern is to be able to have the
-+ * device woken up, even if runtime_pm is disabled
-+ */
-+ ret = sun6i_spi_runtime_resume(&pdev->dev);
-+ if (ret) {
-+ dev_err(&pdev->dev, "Couldn't resume the device\n");
-+ goto err_free_master;
-+ }
-+
-+ pm_runtime_set_active(&pdev->dev);
-+ pm_runtime_enable(&pdev->dev);
-+ pm_runtime_idle(&pdev->dev);
-+
-+ ret = devm_spi_register_master(&pdev->dev, master);
-+ if (ret) {
-+ dev_err(&pdev->dev, "cannot register SPI master\n");
-+ goto err_pm_disable;
-+ }
-+
-+ return 0;
-+
-+err_pm_disable:
-+ pm_runtime_disable(&pdev->dev);
-+ sun6i_spi_runtime_suspend(&pdev->dev);
-+err_free_master:
-+ spi_master_put(master);
-+ return ret;
-+}
-+
-+static int sun6i_spi_remove(struct platform_device *pdev)
-+{
-+ pm_runtime_disable(&pdev->dev);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id sun6i_spi_match[] = {
-+ { .compatible = "allwinner,sun6i-a31-spi", },
-+ {}
-+};
-+MODULE_DEVICE_TABLE(of, sun6i_spi_match);
-+
-+static const struct dev_pm_ops sun6i_spi_pm_ops = {
-+ .runtime_resume = sun6i_spi_runtime_resume,
-+ .runtime_suspend = sun6i_spi_runtime_suspend,
-+};
-+
-+static struct platform_driver sun6i_spi_driver = {
-+ .probe = sun6i_spi_probe,
-+ .remove = sun6i_spi_remove,
-+ .driver = {
-+ .name = "sun6i-spi",
-+ .owner = THIS_MODULE,
-+ .of_match_table = sun6i_spi_match,
-+ .pm = &sun6i_spi_pm_ops,
-+ },
-+};
-+module_platform_driver(sun6i_spi_driver);
-+
-+MODULE_AUTHOR("Pan Nan <pannan@allwinnertech.com>");
-+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
-+MODULE_DESCRIPTION("Allwinner A31 SPI controller driver");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/sunxi/patches-3.14/146-2-spi-add-a10-spi.patch b/target/linux/sunxi/patches-3.14/146-2-spi-add-a10-spi.patch
deleted file mode 100644
index 483d216a57..0000000000
--- a/target/linux/sunxi/patches-3.14/146-2-spi-add-a10-spi.patch
+++ /dev/null
@@ -1,558 +0,0 @@
-From 1ae7667375308c27023d793372d6be1f3b89f5b5 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Sat, 22 Feb 2014 22:35:53 +0100
-Subject: [PATCH] spi: sunxi: Add Allwinner A10 SPI controller driver
-
-The older Allwinner SoCs (A10, A13, A10s and A20) all have the same SPI
-controller.
-
-Unfortunately, this SPI controller, even though quite similar, is significantly
-different from the recently supported A31 SPI controller (different registers
-offset, split/merged registers, etc.). Supporting both controllers in a single
-driver would be unreasonable, hence the addition of a new driver.
-
-Like its more recent counterpart, it supports DMA, but the driver only does PIO
-until we have a dmaengine driver for this platform.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- .../devicetree/bindings/spi/spi-sun4i.txt | 24 ++
- drivers/spi/Kconfig | 6 +
- drivers/spi/Makefile | 1 +
- drivers/spi/spi-sun4i.c | 477 +++++++++++++++++++++
- 4 files changed, 508 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/spi/spi-sun4i.txt
- create mode 100644 drivers/spi/spi-sun4i.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/spi/spi-sun4i.txt
-@@ -0,0 +1,24 @@
-+Allwinner A10 SPI controller
-+
-+Required properties:
-+- compatible: Should be "allwinner,sun4-a10-spi".
-+- reg: Should contain register location and length.
-+- interrupts: Should contain interrupt.
-+- clocks: phandle to the clocks feeding the SPI controller. Two are
-+ needed:
-+ - "ahb": the gated AHB parent clock
-+ - "mod": the parent module clock
-+- clock-names: Must contain the clock names described just above
-+
-+Example:
-+
-+spi1: spi@01c06000 {
-+ compatible = "allwinner,sun4i-a10-spi";
-+ reg = <0x01c06000 0x1000>;
-+ interrupts = <11>;
-+ clocks = <&ahb_gates 21>, <&spi1_clk>;
-+ clock-names = "ahb", "mod";
-+ status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+};
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -455,6 +455,12 @@ config SPI_SIRF
- help
- SPI driver for CSR SiRFprimaII SoCs
-
-+config SPI_SUN4I
-+ tristate "Allwinner A10 SoCs SPI controller"
-+ depends on ARCH_SUNXI || COMPILE_TEST
-+ help
-+ SPI driver for Allwinner sun4i, sun5i and sun7i SoCs
-+
- config SPI_SUN6I
- tristate "Allwinner A31 SPI controller"
- depends on ARCH_SUNXI || COMPILE_TEST
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -71,6 +71,7 @@ obj-$(CONFIG_SPI_SH_HSPI) += spi-sh-hsp
- obj-$(CONFIG_SPI_SH_MSIOF) += spi-sh-msiof.o
- obj-$(CONFIG_SPI_SH_SCI) += spi-sh-sci.o
- obj-$(CONFIG_SPI_SIRF) += spi-sirf.o
-+obj-$(CONFIG_SPI_SUN4I) += spi-sun4i.o
- obj-$(CONFIG_SPI_SUN6I) += spi-sun6i.o
- obj-$(CONFIG_SPI_TEGRA114) += spi-tegra114.o
- obj-$(CONFIG_SPI_TEGRA20_SFLASH) += spi-tegra20-sflash.o
---- /dev/null
-+++ b/drivers/spi/spi-sun4i.c
-@@ -0,0 +1,477 @@
-+/*
-+ * Copyright (C) 2012 - 2014 Allwinner Tech
-+ * Pan Nan <pannan@allwinnertech.com>
-+ *
-+ * Copyright (C) 2014 Maxime Ripard
-+ * Maxime Ripard <maxime.ripard@free-electrons.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/device.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/pm_runtime.h>
-+#include <linux/workqueue.h>
-+
-+#include <linux/spi/spi.h>
-+
-+#define SUN4I_FIFO_DEPTH 64
-+
-+#define SUN4I_RXDATA_REG 0x00
-+
-+#define SUN4I_TXDATA_REG 0x04
-+
-+#define SUN4I_CTL_REG 0x08
-+#define SUN4I_CTL_ENABLE BIT(0)
-+#define SUN4I_CTL_MASTER BIT(1)
-+#define SUN4I_CTL_CPHA BIT(2)
-+#define SUN4I_CTL_CPOL BIT(3)
-+#define SUN4I_CTL_CS_ACTIVE_LOW BIT(4)
-+#define SUN4I_CTL_LMTF BIT(6)
-+#define SUN4I_CTL_TF_RST BIT(8)
-+#define SUN4I_CTL_RF_RST BIT(9)
-+#define SUN4I_CTL_XCH BIT(10)
-+#define SUN4I_CTL_CS_MASK 0x3000
-+#define SUN4I_CTL_CS(cs) (((cs) << 12) & SUN4I_CTL_CS_MASK)
-+#define SUN4I_CTL_DHB BIT(15)
-+#define SUN4I_CTL_CS_MANUAL BIT(16)
-+#define SUN4I_CTL_CS_LEVEL BIT(17)
-+#define SUN4I_CTL_TP BIT(18)
-+
-+#define SUN4I_INT_CTL_REG 0x0c
-+#define SUN4I_INT_CTL_TC BIT(16)
-+
-+#define SUN4I_INT_STA_REG 0x10
-+
-+#define SUN4I_DMA_CTL_REG 0x14
-+
-+#define SUN4I_WAIT_REG 0x18
-+
-+#define SUN4I_CLK_CTL_REG 0x1c
-+#define SUN4I_CLK_CTL_CDR2_MASK 0xff
-+#define SUN4I_CLK_CTL_CDR2(div) ((div) & SUN4I_CLK_CTL_CDR2_MASK)
-+#define SUN4I_CLK_CTL_CDR1_MASK 0xf
-+#define SUN4I_CLK_CTL_CDR1(div) (((div) & SUN4I_CLK_CTL_CDR1_MASK) << 8)
-+#define SUN4I_CLK_CTL_DRS BIT(12)
-+
-+#define SUN4I_BURST_CNT_REG 0x20
-+#define SUN4I_BURST_CNT(cnt) ((cnt) & 0xffffff)
-+
-+#define SUN4I_XMIT_CNT_REG 0x24
-+#define SUN4I_XMIT_CNT(cnt) ((cnt) & 0xffffff)
-+
-+#define SUN4I_FIFO_STA_REG 0x28
-+#define SUN4I_FIFO_STA_RF_CNT_MASK 0x7f
-+#define SUN4I_FIFO_STA_RF_CNT_BITS 0
-+#define SUN4I_FIFO_STA_TF_CNT_MASK 0x7f
-+#define SUN4I_FIFO_STA_TF_CNT_BITS 16
-+
-+struct sun4i_spi {
-+ struct spi_master *master;
-+ void __iomem *base_addr;
-+ struct clk *hclk;
-+ struct clk *mclk;
-+
-+ struct completion done;
-+
-+ const u8 *tx_buf;
-+ u8 *rx_buf;
-+ int len;
-+};
-+
-+static inline u32 sun4i_spi_read(struct sun4i_spi *sspi, u32 reg)
-+{
-+ return readl(sspi->base_addr + reg);
-+}
-+
-+static inline void sun4i_spi_write(struct sun4i_spi *sspi, u32 reg, u32 value)
-+{
-+ writel(value, sspi->base_addr + reg);
-+}
-+
-+static inline void sun4i_spi_drain_fifo(struct sun4i_spi *sspi, int len)
-+{
-+ u32 reg, cnt;
-+ u8 byte;
-+
-+ /* See how much data is available */
-+ reg = sun4i_spi_read(sspi, SUN4I_FIFO_STA_REG);
-+ reg &= SUN4I_FIFO_STA_RF_CNT_MASK;
-+ cnt = reg >> SUN4I_FIFO_STA_RF_CNT_BITS;
-+
-+ if (len > cnt)
-+ len = cnt;
-+
-+ while (len--) {
-+ byte = readb(sspi->base_addr + SUN4I_RXDATA_REG);
-+ if (sspi->rx_buf)
-+ *sspi->rx_buf++ = byte;
-+ }
-+}
-+
-+static inline void sun4i_spi_fill_fifo(struct sun4i_spi *sspi, int len)
-+{
-+ u8 byte;
-+
-+ if (len > sspi->len)
-+ len = sspi->len;
-+
-+ while (len--) {
-+ byte = sspi->tx_buf ? *sspi->tx_buf++ : 0;
-+ writeb(byte, sspi->base_addr + SUN4I_TXDATA_REG);
-+ sspi->len--;
-+ }
-+}
-+
-+static void sun4i_spi_set_cs(struct spi_device *spi, bool enable)
-+{
-+ struct sun4i_spi *sspi = spi_master_get_devdata(spi->master);
-+ u32 reg;
-+
-+ reg = sun4i_spi_read(sspi, SUN4I_CTL_REG);
-+
-+ reg &= ~SUN4I_CTL_CS_MASK;
-+ reg |= SUN4I_CTL_CS(spi->chip_select);
-+
-+ if (enable)
-+ reg |= SUN4I_CTL_CS_LEVEL;
-+ else
-+ reg &= ~SUN4I_CTL_CS_LEVEL;
-+
-+ /*
-+ * Even though this looks irrelevant since we are supposed to
-+ * be controlling the chip select manually, this bit also
-+ * controls the levels of the chip select for inactive
-+ * devices.
-+ *
-+ * If we don't set it, the chip select level will go low by
-+ * default when the device is idle, which is not really
-+ * expected in the common case where the chip select is active
-+ * low.
-+ */
-+ if (spi->mode & SPI_CS_HIGH)
-+ reg &= ~SUN4I_CTL_CS_ACTIVE_LOW;
-+ else
-+ reg |= SUN4I_CTL_CS_ACTIVE_LOW;
-+
-+ sun4i_spi_write(sspi, SUN4I_CTL_REG, reg);
-+}
-+
-+static int sun4i_spi_transfer_one(struct spi_master *master,
-+ struct spi_device *spi,
-+ struct spi_transfer *tfr)
-+{
-+ struct sun4i_spi *sspi = spi_master_get_devdata(master);
-+ unsigned int mclk_rate, div, timeout;
-+ unsigned int tx_len = 0;
-+ int ret = 0;
-+ u32 reg;
-+
-+ /* We don't support transfer larger than the FIFO */
-+ if (tfr->len > SUN4I_FIFO_DEPTH)
-+ return -EINVAL;
-+
-+ reinit_completion(&sspi->done);
-+ sspi->tx_buf = tfr->tx_buf;
-+ sspi->rx_buf = tfr->rx_buf;
-+ sspi->len = tfr->len;
-+
-+ /* Clear pending interrupts */
-+ sun4i_spi_write(sspi, SUN4I_INT_STA_REG, ~0);
-+
-+
-+ reg = sun4i_spi_read(sspi, SUN4I_CTL_REG);
-+
-+ /* Reset FIFOs */
-+ sun4i_spi_write(sspi, SUN4I_CTL_REG,
-+ reg | SUN4I_CTL_RF_RST | SUN4I_CTL_TF_RST);
-+
-+ /*
-+ * Setup the transfer control register: Chip Select,
-+ * polarities, etc.
-+ */
-+ if (spi->mode & SPI_CPOL)
-+ reg |= SUN4I_CTL_CPOL;
-+ else
-+ reg &= ~SUN4I_CTL_CPOL;
-+
-+ if (spi->mode & SPI_CPHA)
-+ reg |= SUN4I_CTL_CPHA;
-+ else
-+ reg &= ~SUN4I_CTL_CPHA;
-+
-+ if (spi->mode & SPI_LSB_FIRST)
-+ reg |= SUN4I_CTL_LMTF;
-+ else
-+ reg &= ~SUN4I_CTL_LMTF;
-+
-+
-+ /*
-+ * If it's a TX only transfer, we don't want to fill the RX
-+ * FIFO with bogus data
-+ */
-+ if (sspi->rx_buf)
-+ reg &= ~SUN4I_CTL_DHB;
-+ else
-+ reg |= SUN4I_CTL_DHB;
-+
-+ /* We want to control the chip select manually */
-+ reg |= SUN4I_CTL_CS_MANUAL;
-+
-+ sun4i_spi_write(sspi, SUN4I_CTL_REG, reg);
-+
-+ /* Ensure that we have a parent clock fast enough */
-+ mclk_rate = clk_get_rate(sspi->mclk);
-+ if (mclk_rate < (2 * spi->max_speed_hz)) {
-+ clk_set_rate(sspi->mclk, 2 * spi->max_speed_hz);
-+ mclk_rate = clk_get_rate(sspi->mclk);
-+ }
-+
-+ /*
-+ * Setup clock divider.
-+ *
-+ * We have two choices there. Either we can use the clock
-+ * divide rate 1, which is calculated thanks to this formula:
-+ * SPI_CLK = MOD_CLK / (2 ^ (cdr + 1))
-+ * Or we can use CDR2, which is calculated with the formula:
-+ * SPI_CLK = MOD_CLK / (2 * (cdr + 1))
-+ * Wether we use the former or the latter is set through the
-+ * DRS bit.
-+ *
-+ * First try CDR2, and if we can't reach the expected
-+ * frequency, fall back to CDR1.
-+ */
-+ div = mclk_rate / (2 * spi->max_speed_hz);
-+ if (div <= (SUN4I_CLK_CTL_CDR2_MASK + 1)) {
-+ if (div > 0)
-+ div--;
-+
-+ reg = SUN4I_CLK_CTL_CDR2(div) | SUN4I_CLK_CTL_DRS;
-+ } else {
-+ div = ilog2(mclk_rate) - ilog2(spi->max_speed_hz);
-+ reg = SUN4I_CLK_CTL_CDR1(div);
-+ }
-+
-+ sun4i_spi_write(sspi, SUN4I_CLK_CTL_REG, reg);
-+
-+ /* Setup the transfer now... */
-+ if (sspi->tx_buf)
-+ tx_len = tfr->len;
-+
-+ /* Setup the counters */
-+ sun4i_spi_write(sspi, SUN4I_BURST_CNT_REG, SUN4I_BURST_CNT(tfr->len));
-+ sun4i_spi_write(sspi, SUN4I_XMIT_CNT_REG, SUN4I_XMIT_CNT(tx_len));
-+
-+ /* Fill the TX FIFO */
-+ sun4i_spi_fill_fifo(sspi, SUN4I_FIFO_DEPTH);
-+
-+ /* Enable the interrupts */
-+ sun4i_spi_write(sspi, SUN4I_INT_CTL_REG, SUN4I_INT_CTL_TC);
-+
-+ /* Start the transfer */
-+ reg = sun4i_spi_read(sspi, SUN4I_CTL_REG);
-+ sun4i_spi_write(sspi, SUN4I_CTL_REG, reg | SUN4I_CTL_XCH);
-+
-+ timeout = wait_for_completion_timeout(&sspi->done,
-+ msecs_to_jiffies(1000));
-+ if (!timeout) {
-+ ret = -ETIMEDOUT;
-+ goto out;
-+ }
-+
-+ sun4i_spi_drain_fifo(sspi, SUN4I_FIFO_DEPTH);
-+
-+out:
-+ sun4i_spi_write(sspi, SUN4I_INT_CTL_REG, 0);
-+
-+ return ret;
-+}
-+
-+static irqreturn_t sun4i_spi_handler(int irq, void *dev_id)
-+{
-+ struct sun4i_spi *sspi = dev_id;
-+ u32 status = sun4i_spi_read(sspi, SUN4I_INT_STA_REG);
-+
-+ /* Transfer complete */
-+ if (status & SUN4I_INT_CTL_TC) {
-+ sun4i_spi_write(sspi, SUN4I_INT_STA_REG, SUN4I_INT_CTL_TC);
-+ complete(&sspi->done);
-+ return IRQ_HANDLED;
-+ }
-+
-+ return IRQ_NONE;
-+}
-+
-+static int sun4i_spi_runtime_resume(struct device *dev)
-+{
-+ struct spi_master *master = dev_get_drvdata(dev);
-+ struct sun4i_spi *sspi = spi_master_get_devdata(master);
-+ int ret;
-+
-+ ret = clk_prepare_enable(sspi->hclk);
-+ if (ret) {
-+ dev_err(dev, "Couldn't enable AHB clock\n");
-+ goto out;
-+ }
-+
-+ ret = clk_prepare_enable(sspi->mclk);
-+ if (ret) {
-+ dev_err(dev, "Couldn't enable module clock\n");
-+ goto err;
-+ }
-+
-+ sun4i_spi_write(sspi, SUN4I_CTL_REG,
-+ SUN4I_CTL_ENABLE | SUN4I_CTL_MASTER | SUN4I_CTL_TP);
-+
-+ return 0;
-+
-+err:
-+ clk_disable_unprepare(sspi->hclk);
-+out:
-+ return ret;
-+}
-+
-+static int sun4i_spi_runtime_suspend(struct device *dev)
-+{
-+ struct spi_master *master = dev_get_drvdata(dev);
-+ struct sun4i_spi *sspi = spi_master_get_devdata(master);
-+
-+ clk_disable_unprepare(sspi->mclk);
-+ clk_disable_unprepare(sspi->hclk);
-+
-+ return 0;
-+}
-+
-+static int sun4i_spi_probe(struct platform_device *pdev)
-+{
-+ struct spi_master *master;
-+ struct sun4i_spi *sspi;
-+ struct resource *res;
-+ int ret = 0, irq;
-+
-+ master = spi_alloc_master(&pdev->dev, sizeof(struct sun4i_spi));
-+ if (!master) {
-+ dev_err(&pdev->dev, "Unable to allocate SPI Master\n");
-+ return -ENOMEM;
-+ }
-+
-+ platform_set_drvdata(pdev, master);
-+ sspi = spi_master_get_devdata(master);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ sspi->base_addr = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(sspi->base_addr)) {
-+ ret = PTR_ERR(sspi->base_addr);
-+ goto err_free_master;
-+ }
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0) {
-+ dev_err(&pdev->dev, "No spi IRQ specified\n");
-+ ret = -ENXIO;
-+ goto err_free_master;
-+ }
-+
-+ ret = devm_request_irq(&pdev->dev, irq, sun4i_spi_handler,
-+ 0, "sun4i-spi", sspi);
-+ if (ret) {
-+ dev_err(&pdev->dev, "Cannot request IRQ\n");
-+ goto err_free_master;
-+ }
-+
-+ sspi->master = master;
-+ master->set_cs = sun4i_spi_set_cs;
-+ master->transfer_one = sun4i_spi_transfer_one;
-+ master->num_chipselect = 4;
-+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
-+ master->dev.of_node = pdev->dev.of_node;
-+ master->auto_runtime_pm = true;
-+
-+ sspi->hclk = devm_clk_get(&pdev->dev, "ahb");
-+ if (IS_ERR(sspi->hclk)) {
-+ dev_err(&pdev->dev, "Unable to acquire AHB clock\n");
-+ ret = PTR_ERR(sspi->hclk);
-+ goto err_free_master;
-+ }
-+
-+ sspi->mclk = devm_clk_get(&pdev->dev, "mod");
-+ if (IS_ERR(sspi->mclk)) {
-+ dev_err(&pdev->dev, "Unable to acquire module clock\n");
-+ ret = PTR_ERR(sspi->mclk);
-+ goto err_free_master;
-+ }
-+
-+ init_completion(&sspi->done);
-+
-+ /*
-+ * This wake-up/shutdown pattern is to be able to have the
-+ * device woken up, even if runtime_pm is disabled
-+ */
-+ ret = sun4i_spi_runtime_resume(&pdev->dev);
-+ if (ret) {
-+ dev_err(&pdev->dev, "Couldn't resume the device\n");
-+ goto err_free_master;
-+ }
-+
-+ pm_runtime_set_active(&pdev->dev);
-+ pm_runtime_enable(&pdev->dev);
-+ pm_runtime_idle(&pdev->dev);
-+
-+ ret = devm_spi_register_master(&pdev->dev, master);
-+ if (ret) {
-+ dev_err(&pdev->dev, "cannot register SPI master\n");
-+ goto err_pm_disable;
-+ }
-+
-+ return 0;
-+
-+err_pm_disable:
-+ pm_runtime_disable(&pdev->dev);
-+ sun4i_spi_runtime_suspend(&pdev->dev);
-+err_free_master:
-+ spi_master_put(master);
-+ return ret;
-+}
-+
-+static int sun4i_spi_remove(struct platform_device *pdev)
-+{
-+ pm_runtime_disable(&pdev->dev);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id sun4i_spi_match[] = {
-+ { .compatible = "allwinner,sun4i-a10-spi", },
-+ {}
-+};
-+MODULE_DEVICE_TABLE(of, sun4i_spi_match);
-+
-+static const struct dev_pm_ops sun4i_spi_pm_ops = {
-+ .runtime_resume = sun4i_spi_runtime_resume,
-+ .runtime_suspend = sun4i_spi_runtime_suspend,
-+};
-+
-+static struct platform_driver sun4i_spi_driver = {
-+ .probe = sun4i_spi_probe,
-+ .remove = sun4i_spi_remove,
-+ .driver = {
-+ .name = "sun4i-spi",
-+ .owner = THIS_MODULE,
-+ .of_match_table = sun4i_spi_match,
-+ .pm = &sun4i_spi_pm_ops,
-+ },
-+};
-+module_platform_driver(sun4i_spi_driver);
-+
-+MODULE_AUTHOR("Pan Nan <pannan@allwinnertech.com>");
-+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
-+MODULE_DESCRIPTION("Allwinner A1X/A20 SPI controller driver");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/sunxi/patches-3.14/147-sun6i-enable-spi-in-defconfig.patch b/target/linux/sunxi/patches-3.14/147-sun6i-enable-spi-in-defconfig.patch
deleted file mode 100644
index 6f2dbe5375..0000000000
--- a/target/linux/sunxi/patches-3.14/147-sun6i-enable-spi-in-defconfig.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 3aa7ff0de5bddc825406ffff49dc4a38b13ebac3 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Wed, 5 Feb 2014 14:05:07 +0100
-Subject: [PATCH] ARM: sunxi: Enable A31 SPI and SID in the defconfig
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/configs/sunxi_defconfig | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/arch/arm/configs/sunxi_defconfig
-+++ b/arch/arm/configs/sunxi_defconfig
-@@ -24,6 +24,7 @@ CONFIG_IP_PNP_BOOTP=y
- # CONFIG_WIRELESS is not set
- CONFIG_DEVTMPFS=y
- CONFIG_DEVTMPFS_MOUNT=y
-+CONFIG_EEPROM_SUNXI_SID=y
- CONFIG_NETDEVICES=y
- CONFIG_SUN4I_EMAC=y
- # CONFIG_NET_CADENCE is not set
-@@ -48,6 +49,8 @@ CONFIG_I2C=y
- # CONFIG_I2C_COMPAT is not set
- CONFIG_I2C_CHARDEV=y
- CONFIG_I2C_MV64XXX=y
-+CONFIG_SPI=y
-+CONFIG_SPI_SUN6I=y
- CONFIG_GPIO_SYSFS=y
- # CONFIG_HWMON is not set
- CONFIG_WATCHDOG=y
diff --git a/target/linux/sunxi/patches-3.14/148-dt-sun7i-add-spi-muxing.patch b/target/linux/sunxi/patches-3.14/148-dt-sun7i-add-spi-muxing.patch
deleted file mode 100644
index 0c78fa4bc8..0000000000
--- a/target/linux/sunxi/patches-3.14/148-dt-sun7i-add-spi-muxing.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From c38fe0f410a59e194ef5e58429658506d853f1b4 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Sat, 22 Feb 2014 22:35:58 +0100
-Subject: [PATCH] ARM: dt: sun7i: Add SPI muxing options
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun7i-a20.dtsi | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -571,6 +571,20 @@
- allwinner,drive = <3>;
- allwinner,pull = <0>;
- };
-+
-+ spi1_pins_a: spi1@0 {
-+ allwinner,pins = "PI16", "PI17", "PI18", "PI19";
-+ allwinner,function = "spi1";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
-+
-+ spi2_pins_a: spi2@0 {
-+ allwinner,pins = "PC19", "PC20", "PC21", "PC22";
-+ allwinner,function = "spi2";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
- };
-
- timer@01c20c00 {
diff --git a/target/linux/sunxi/patches-3.14/149-dt-sun7i-add-spi-on-olinuxinom.patch b/target/linux/sunxi/patches-3.14/149-dt-sun7i-add-spi-on-olinuxinom.patch
deleted file mode 100644
index cbcfea7c9c..0000000000
--- a/target/linux/sunxi/patches-3.14/149-dt-sun7i-add-spi-on-olinuxinom.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 3f134732aaf4d785532c716f4ef7703d631a510b Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Sat, 22 Feb 2014 22:35:59 +0100
-Subject: [PATCH] ARM: dts: sun7i: Enable the SPI controllers of the
- A20-olinuxino-micro
-
-The A20-Olinuxino-micro has two SPI bus exposed on its UEXT connectors, enable
-them.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 17 +++++++++++++++++
- 1 file changed, 17 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
-@@ -18,7 +18,24 @@
- model = "Olimex A20-Olinuxino Micro";
- compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20";
-
-+ aliases {
-+ spi0 = &spi1;
-+ spi1 = &spi2;
-+ };
-+
- soc@01c00000 {
-+ spi1: spi@01c06000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spi1_pins_a>;
-+ status = "okay";
-+ };
-+
-+ spi2: spi@01c17000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spi2_pins_a>;
-+ status = "okay";
-+ };
-+
- pinctrl@01c20800 {
- led_pins_olinuxino: led_pins@0 {
- allwinner,pins = "PH2";
diff --git a/target/linux/sunxi/patches-3.14/150-dt-sun4i-add-ahci.patch b/target/linux/sunxi/patches-3.14/150-dt-sun4i-add-ahci.patch
deleted file mode 100644
index 6c10a98d77..0000000000
--- a/target/linux/sunxi/patches-3.14/150-dt-sun4i-add-ahci.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From a9868f7ef1d3828e55de36cfeac2f84a77653a1e Mon Sep 17 00:00:00 2001
-From: Oliver Schinagl <oliver@schinagl.nl>
-Date: Tue, 3 Dec 2013 12:10:11 +0100
-Subject: [PATCH] ARM: sun4i: dt: Add ahci / sata support
-
-This patch adds sunxi sata support to A10 boards that have such a connector.
-Some boards also feature a regulator via a GPIO and support for this is also
-added.
-
-Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun4i-a10-a1000.dts | 4 ++++
- arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 10 ++++++++++
- arch/arm/boot/dts/sun4i-a10.dtsi | 8 ++++++++
- 3 files changed, 22 insertions(+)
-
---- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
-+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
-@@ -35,6 +35,10 @@
- };
- };
-
-+ ahci: sata@01c18000 {
-+ status = "okay";
-+ };
-+
- pinctrl@01c20800 {
- emac_power_pin_a1000: emac_power_pin@0 {
- allwinner,pins = "PH15";
---- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
-+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
-@@ -12,6 +12,7 @@
-
- /dts-v1/;
- /include/ "sun4i-a10.dtsi"
-+/include/ "sunxi-common-regulators.dtsi"
-
- / {
- model = "Cubietech Cubieboard";
-@@ -33,6 +34,11 @@
- };
- };
-
-+ ahci: sata@01c18000 {
-+ target-supply = <&reg_ahci_5v>;
-+ status = "okay";
-+ };
-+
- pinctrl@01c20800 {
- led_pins_cubieboard: led_pins@0 {
- allwinner,pins = "PH20", "PH21";
-@@ -77,4 +83,8 @@
- linux,default-trigger = "heartbeat";
- };
- };
-+
-+ reg_ahci_5v: ahci-5v {
-+ status = "okay";
-+ };
- };
---- a/arch/arm/boot/dts/sun4i-a10.dtsi
-+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
-@@ -388,6 +388,14 @@
- #size-cells = <0>;
- };
-
-+ ahci: sata@01c18000 {
-+ compatible = "allwinner,sun4i-a10-ahci";
-+ reg = <0x01c18000 0x1000>;
-+ interrupts = <56>;
-+ clocks = <&pll6 0>, <&ahb_gates 25>;
-+ status = "disabled";
-+ };
-+
- spi3: spi@01c1f000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c1f000 0x1000>;
diff --git a/target/linux/sunxi/patches-3.14/151-dt-sun7i-add-ahci.patch b/target/linux/sunxi/patches-3.14/151-dt-sun7i-add-ahci.patch
deleted file mode 100644
index bd3cc5f55a..0000000000
--- a/target/linux/sunxi/patches-3.14/151-dt-sun7i-add-ahci.patch
+++ /dev/null
@@ -1,136 +0,0 @@
-From cf454a47b64ef78ff85b097c8cb404120c14e6a5 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Fri, 3 Jan 2014 10:27:51 +0100
-Subject: [PATCH] ARM: sun7i: dt: Add ahci / sata support
-
-This patch adds sunxi sata support to A20 boards that have such a connector.
-Some boards also feature a regulator via a GPIO and support for this is also
-added.
-
-Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 10 ++++++++++
- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 19 +++++++++++++++++++
- arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 10 ++++++++++
- arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++
- 4 files changed, 47 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
-@@ -13,12 +13,18 @@
-
- /dts-v1/;
- /include/ "sun7i-a20.dtsi"
-+/include/ "sunxi-common-regulators.dtsi"
-
- / {
- model = "Cubietech Cubieboard2";
- compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
-
- soc@01c00000 {
-+ ahci: sata@01c18000 {
-+ target-supply = <&reg_ahci_5v>;
-+ status = "okay";
-+ };
-+
- pinctrl@01c20800 {
- led_pins_cubieboard2: led_pins@0 {
- allwinner,pins = "PH20", "PH21";
-@@ -74,4 +80,8 @@
- gpios = <&pio 7 20 0>;
- };
- };
-+
-+ reg_ahci_5v: ahci-5v {
-+ status = "okay";
-+ };
- };
---- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-@@ -13,13 +13,26 @@
-
- /dts-v1/;
- /include/ "sun7i-a20.dtsi"
-+/include/ "sunxi-common-regulators.dtsi"
-
- / {
- model = "Cubietech Cubietruck";
- compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
-
- soc@01c00000 {
-+ ahci: sata@01c18000 {
-+ target-supply = <&reg_ahci_5v>;
-+ status = "okay";
-+ };
-+
- pinctrl@01c20800 {
-+ ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
-+ allwinner,pins = "PH12";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
-+
- led_pins_cubietruck: led_pins@0 {
- allwinner,pins = "PH7", "PH11", "PH20", "PH21";
- allwinner,function = "gpio_out";
-@@ -104,4 +117,10 @@
- gpios = <&pio 7 7 0>;
- };
- };
-+
-+ reg_ahci_5v: ahci-5v {
-+ pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
-+ gpio = <&pio 7 12 0>;
-+ status = "okay";
-+ };
- };
---- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
-@@ -13,6 +13,7 @@
-
- /dts-v1/;
- /include/ "sun7i-a20.dtsi"
-+/include/ "sunxi-common-regulators.dtsi"
-
- / {
- model = "Olimex A20-Olinuxino Micro";
-@@ -36,6 +37,11 @@
- status = "okay";
- };
-
-+ ahci: sata@01c18000 {
-+ target-supply = <&reg_ahci_5v>;
-+ status = "okay";
-+ };
-+
- pinctrl@01c20800 {
- led_pins_olinuxino: led_pins@0 {
- allwinner,pins = "PH2";
-@@ -105,4 +111,8 @@
- default-state = "on";
- };
- };
-+
-+ reg_ahci_5v: ahci-5v {
-+ status = "okay";
-+ };
- };
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -450,6 +450,14 @@
- #size-cells = <0>;
- };
-
-+ ahci: sata@01c18000 {
-+ compatible = "allwinner,sun4i-a10-ahci";
-+ reg = <0x01c18000 0x1000>;
-+ interrupts = <0 56 4>;
-+ clocks = <&pll6 0>, <&ahb_gates 25>;
-+ status = "disabled";
-+ };
-+
- spi3: spi@01c1f000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c1f000 0x1000>;
diff --git a/target/linux/sunxi/patches-3.14/155-wdt-add-new-compats.patch b/target/linux/sunxi/patches-3.14/155-wdt-add-new-compats.patch
deleted file mode 100644
index 75c444d6d0..0000000000
--- a/target/linux/sunxi/patches-3.14/155-wdt-add-new-compats.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From ac45fe6b0056d1f92b7c7e5f13514b591a6a9caf Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Sun, 2 Feb 2014 14:55:23 +0100
-Subject: [PATCH] wdt: sunxi: Introduce a new compatible for the A10 and A31
-
-For historical reasons, the Allwinner A10 compatibles are not following the
-patterns used for this other Allwinner SoCs.
-
-Introduce a new compatible following the usual pattern, and deprecate the olders.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt | 7 ++++---
- drivers/watchdog/sunxi_wdt.c | 1 +
- 2 files changed, 5 insertions(+), 3 deletions(-)
-
---- a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt
-+++ b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt
-@@ -2,13 +2,14 @@ Allwinner SoCs Watchdog timer
-
- Required properties:
-
--- compatible : should be "allwinner,<soc-family>-wdt", the currently supported
-- SoC families being sun4i and sun6i
-+- compatible : should be either "allwinner,sun4i-a10-wdt" or
-+ "allwinner,sun6i-a31-wdt" (deprecated:
-+ "allwinner,sun4i-wdt", "allwinner,sun6i-wdt")
- - reg : Specifies base physical address and size of the registers.
-
- Example:
-
- wdt: watchdog@01c20c90 {
-- compatible = "allwinner,sun4i-wdt";
-+ compatible = "allwinner,sun4i-a10-wdt";
- reg = <0x01c20c90 0x10>;
- };
---- a/drivers/watchdog/sunxi_wdt.c
-+++ b/drivers/watchdog/sunxi_wdt.c
-@@ -206,6 +206,7 @@ static void sunxi_wdt_shutdown(struct pl
-
- static const struct of_device_id sunxi_wdt_dt_ids[] = {
- { .compatible = "allwinner,sun4i-wdt" },
-+ { .compatible = "allwinner,sun4i-a10-wdt" },
- { /* sentinel */ }
- };
- MODULE_DEVICE_TABLE(of, sunxi_wdt_dt_ids);
diff --git a/target/linux/sunxi/patches-3.14/156-dt-sunxi-update-wdt-compats.patch b/target/linux/sunxi/patches-3.14/156-dt-sunxi-update-wdt-compats.patch
deleted file mode 100644
index 235550b47d..0000000000
--- a/target/linux/sunxi/patches-3.14/156-dt-sunxi-update-wdt-compats.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From f722ea226581a75107ef16b46db1b7b5b999c93a Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Sun, 2 Feb 2014 14:55:25 +0100
-Subject: [PATCH] ARM: sunxi: dt: Update the watchdog compatibles
-
-The watchdog compatibles were following a different pattern than the one found
-in the other devices. Now that the driver supports the right pattern, switch to
-it in the DT.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun4i-a10.dtsi | 2 +-
- arch/arm/boot/dts/sun5i-a10s.dtsi | 2 +-
- arch/arm/boot/dts/sun5i-a13.dtsi | 2 +-
- arch/arm/boot/dts/sun6i-a31.dtsi | 2 +-
- arch/arm/boot/dts/sun7i-a20.dtsi | 2 +-
- 5 files changed, 5 insertions(+), 5 deletions(-)
-
---- a/arch/arm/boot/dts/sun4i-a10.dtsi
-+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
-@@ -487,7 +487,7 @@
- };
-
- wdt: watchdog@01c20c90 {
-- compatible = "allwinner,sun4i-wdt";
-+ compatible = "allwinner,sun4i-a10-wdt";
- reg = <0x01c20c90 0x10>;
- };
-
---- a/arch/arm/boot/dts/sun5i-a10s.dtsi
-+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
-@@ -392,7 +392,7 @@
- };
-
- wdt: watchdog@01c20c90 {
-- compatible = "allwinner,sun4i-wdt";
-+ compatible = "allwinner,sun4i-a10-wdt";
- reg = <0x01c20c90 0x10>;
- };
-
---- a/arch/arm/boot/dts/sun5i-a13.dtsi
-+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
-@@ -393,7 +393,7 @@
- };
-
- wdt: watchdog@01c20c90 {
-- compatible = "allwinner,sun4i-wdt";
-+ compatible = "allwinner,sun4i-a10-wdt";
- reg = <0x01c20c90 0x10>;
- };
-
---- a/arch/arm/boot/dts/sun6i-a31.dtsi
-+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
-@@ -289,7 +289,7 @@
- };
-
- wdt1: watchdog@01c20ca0 {
-- compatible = "allwinner,sun6i-wdt";
-+ compatible = "allwinner,sun6i-a31-wdt";
- reg = <0x01c20ca0 0x20>;
- };
-
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -608,7 +608,7 @@
- };
-
- wdt: watchdog@01c20c90 {
-- compatible = "allwinner,sun4i-wdt";
-+ compatible = "allwinner,sun4i-a10-wdt";
- reg = <0x01c20c90 0x10>;
- };
-
diff --git a/target/linux/sunxi/patches-3.14/157-mach-add-new-wdtcompats-to-reboot-code.patch b/target/linux/sunxi/patches-3.14/157-mach-add-new-wdtcompats-to-reboot-code.patch
deleted file mode 100644
index 6dcda3aea4..0000000000
--- a/target/linux/sunxi/patches-3.14/157-mach-add-new-wdtcompats-to-reboot-code.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 30e5365b3ad3858bbdf40e8364c1e3260861b4e4 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Sun, 2 Feb 2014 14:55:24 +0100
-Subject: [PATCH] ARM: sunxi: Add the new watchog compatibles to the reboot
- code
-
-Now that the watchdog driver has new compatibles, we need to support them in
-the machine reboot code too.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/mach-sunxi/sunxi.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm/mach-sunxi/sunxi.c
-+++ b/arch/arm/mach-sunxi/sunxi.c
-@@ -95,7 +95,9 @@ static void sun6i_restart(enum reboot_mo
-
- static struct of_device_id sunxi_restart_ids[] = {
- { .compatible = "allwinner,sun4i-wdt" },
-+ { .compatible = "allwinner,sun4i-a10-wdt" },
- { .compatible = "allwinner,sun6i-wdt" },
-+ { .compatible = "allwinner,sun6i-a31-wdt" },
- { /*sentinel*/ }
- };
-
diff --git a/target/linux/sunxi/patches-3.14/160-dt-sun4i-add-usb-host-bindings.patch b/target/linux/sunxi/patches-3.14/160-dt-sun4i-add-usb-host-bindings.patch
deleted file mode 100644
index f1853dfb42..0000000000
--- a/target/linux/sunxi/patches-3.14/160-dt-sun4i-add-usb-host-bindings.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From 991b5f6d2af837b56adfcb3b3a1fe167647b9fdb Mon Sep 17 00:00:00 2001
-From: Roman Byshko <rbyshko@gmail.com>
-Date: Wed, 18 Sep 2013 00:30:04 +0200
-Subject: [PATCH] ARM: sun4i: dt: Add USB host bindings
-
-Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
-
-Signed-off-by: Roman Byshko <rbyshko@gmail.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun4i-a10.dtsi | 52 ++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 52 insertions(+)
-
---- a/arch/arm/boot/dts/sun4i-a10.dtsi
-+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
-@@ -377,6 +377,38 @@
- #size-cells = <0>;
- };
-
-+ usbphy: phy@01c13400 {
-+ #phy-cells = <1>;
-+ compatible = "allwinner,sun4i-a10-usb-phy";
-+ reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
-+ reg-names = "phy_ctrl", "pmu1", "pmu2";
-+ clocks = <&usb_clk 8>;
-+ clock-names = "usb_phy";
-+ resets = <&usb_clk 1>, <&usb_clk 2>;
-+ reset-names = "usb1_reset", "usb2_reset";
-+ status = "disabled";
-+ };
-+
-+ ehci0: usb@01c14000 {
-+ compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
-+ reg = <0x01c14000 0x100>;
-+ interrupts = <39>;
-+ clocks = <&ahb_gates 1>;
-+ phys = <&usbphy 1>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ohci0: usb@01c14400 {
-+ compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
-+ reg = <0x01c14400 0x100>;
-+ interrupts = <64>;
-+ clocks = <&usb_clk 6>, <&ahb_gates 2>;
-+ phys = <&usbphy 1>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
- spi2: spi@01c17000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c17000 0x1000>;
-@@ -396,6 +428,26 @@
- status = "disabled";
- };
-
-+ ehci1: usb@01c1c000 {
-+ compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
-+ reg = <0x01c1c000 0x100>;
-+ interrupts = <40>;
-+ clocks = <&ahb_gates 3>;
-+ phys = <&usbphy 2>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ohci1: usb@01c1c400 {
-+ compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
-+ reg = <0x01c1c400 0x100>;
-+ interrupts = <65>;
-+ clocks = <&usb_clk 7>, <&ahb_gates 4>;
-+ phys = <&usbphy 2>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
- spi3: spi@01c1f000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c1f000 0x1000>;
diff --git a/target/linux/sunxi/patches-3.14/161-dt-sun5i-add-usb-host-bindings.patch b/target/linux/sunxi/patches-3.14/161-dt-sun5i-add-usb-host-bindings.patch
deleted file mode 100644
index 7b014954f7..0000000000
--- a/target/linux/sunxi/patches-3.14/161-dt-sun5i-add-usb-host-bindings.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From 1b5a1b92147936c5aa2acec1683663b4d22e9ae6 Mon Sep 17 00:00:00 2001
-From: Roman Byshko <rbyshko@gmail.com>
-Date: Tue, 24 Sep 2013 20:03:40 +0200
-Subject: [PATCH] ARM: sun5i: dt: Add USB host bindings
-
-Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
-
-Signed-off-by: Roman Byshko <rbyshko@gmail.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun5i-a10s.dtsi | 32 ++++++++++++++++++++++++++++++++
- arch/arm/boot/dts/sun5i-a13.dtsi | 32 ++++++++++++++++++++++++++++++++
- 2 files changed, 64 insertions(+)
-
---- a/arch/arm/boot/dts/sun5i-a13.dtsi
-+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
-@@ -320,6 +320,38 @@
- #size-cells = <0>;
- };
-
-+ usbphy: phy@01c13400 {
-+ #phy-cells = <1>;
-+ compatible = "allwinner,sun5i-a13-usb-phy";
-+ reg = <0x01c13400 0x10 0x01c14800 0x4>;
-+ reg-names = "phy_ctrl", "pmu1";
-+ clocks = <&usb_clk 8>;
-+ clock-names = "usb_phy";
-+ resets = <&usb_clk 1>;
-+ reset-names = "usb1_reset";
-+ status = "disabled";
-+ };
-+
-+ ehci0: usb@01c14000 {
-+ compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
-+ reg = <0x01c14000 0x100>;
-+ interrupts = <39>;
-+ clocks = <&ahb_gates 1>;
-+ phys = <&usbphy 1>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ohci0: usb@01c14400 {
-+ compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
-+ reg = <0x01c14400 0x100>;
-+ interrupts = <40>;
-+ clocks = <&usb_clk 6>, <&ahb_gates 2>;
-+ phys = <&usbphy 1>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
- spi2: spi@01c17000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c17000 0x1000>;
diff --git a/target/linux/sunxi/patches-3.14/162-dt-sun7i-add-usb-host-bindings.patch b/target/linux/sunxi/patches-3.14/162-dt-sun7i-add-usb-host-bindings.patch
deleted file mode 100644
index a8d0f171d9..0000000000
--- a/target/linux/sunxi/patches-3.14/162-dt-sun7i-add-usb-host-bindings.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From 008dffff2fa751c988671c4fc0c9a404ea808280 Mon Sep 17 00:00:00 2001
-From: Roman Byshko <rbyshko@gmail.com>
-Date: Thu, 19 Sep 2013 21:36:10 +0200
-Subject: [PATCH] ARM: sun7i: dt: Add USB host bindings
-
-Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
-
-Signed-off-by: Roman Byshko <rbyshko@gmail.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun7i-a20.dtsi | 52 ++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 52 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -439,6 +439,38 @@
- #size-cells = <0>;
- };
-
-+ usbphy: phy@01c13400 {
-+ #phy-cells = <1>;
-+ compatible = "allwinner,sun7i-a20-usb-phy";
-+ reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
-+ reg-names = "phy_ctrl", "pmu1", "pmu2";
-+ clocks = <&usb_clk 8>;
-+ clock-names = "usb_phy";
-+ resets = <&usb_clk 1>, <&usb_clk 2>;
-+ reset-names = "usb1_reset", "usb2_reset";
-+ status = "disabled";
-+ };
-+
-+ ehci0: usb@01c14000 {
-+ compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
-+ reg = <0x01c14000 0x100>;
-+ interrupts = <0 39 4>;
-+ clocks = <&ahb_gates 1>;
-+ phys = <&usbphy 1>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ohci0: usb@01c14400 {
-+ compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
-+ reg = <0x01c14400 0x100>;
-+ interrupts = <0 64 4>;
-+ clocks = <&usb_clk 6>, <&ahb_gates 2>;
-+ phys = <&usbphy 1>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
- spi2: spi@01c17000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c17000 0x1000>;
-@@ -458,6 +490,26 @@
- status = "disabled";
- };
-
-+ ehci1: usb@01c1c000 {
-+ compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
-+ reg = <0x01c1c000 0x100>;
-+ interrupts = <0 40 4>;
-+ clocks = <&ahb_gates 3>;
-+ phys = <&usbphy 2>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ohci1: usb@01c1c400 {
-+ compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
-+ reg = <0x01c1c400 0x100>;
-+ interrupts = <0 65 4>;
-+ clocks = <&usb_clk 7>, <&ahb_gates 4>;
-+ phys = <&usbphy 2>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
- spi3: spi@01c1f000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c1f000 0x1000>;
diff --git a/target/linux/sunxi/patches-3.14/163-dt-sun4i-add-usb-host-to-boards.patch b/target/linux/sunxi/patches-3.14/163-dt-sun4i-add-usb-host-to-boards.patch
deleted file mode 100644
index ce78cb7512..0000000000
--- a/target/linux/sunxi/patches-3.14/163-dt-sun4i-add-usb-host-to-boards.patch
+++ /dev/null
@@ -1,240 +0,0 @@
-From f2509ec45a09013e300460a967f694561d169b98 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Sat, 11 Jan 2014 04:47:38 +0100
-Subject: [PATCH] ARM: sun4i: dt: Add USB host nodes to hackberry dts
-
-Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
-
-Based on fex file settings, the fex file also contains a mysterious line:
-usb_hub_vcc_en_gpio = port:PB09<1><0><default><0>
-
-Which also clashes with usbc0, which has:
-usb_drv_vbus_gpio = port:PB09<1><0><default><0>
-
-So if usb does not work properly we need someone with a hackberry to look
-closer into this.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun4i-a10-hackberry.dts | 40 +++++++++++++++++++++++++++++++
- 1 file changed, 40 insertions(+)
-
---- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
-+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
-@@ -13,6 +13,7 @@
-
- /dts-v1/;
- /include/ "sun4i-a10.dtsi"
-+/include/ "sunxi-common-regulators.dtsi"
-
- / {
- model = "Miniand Hackberry";
-@@ -35,6 +36,28 @@
- };
- };
-
-+ usbphy: phy@01c13400 {
-+ usb1_vbus-supply = <&reg_usb1_vbus>;
-+ usb2_vbus-supply = <&reg_usb2_vbus>;
-+ status = "okay";
-+ };
-+
-+ ehci0: usb@01c14000 {
-+ status = "okay";
-+ };
-+
-+ ohci0: usb@01c14400 {
-+ status = "okay";
-+ };
-+
-+ ehci1: usb@01c1c000 {
-+ status = "okay";
-+ };
-+
-+ ohci1: usb@01c1c400 {
-+ status = "okay";
-+ };
-+
- pio: pinctrl@01c20800 {
- pinctrl-names = "default";
- pinctrl-0 = <&hackberry_hogs>;
-@@ -45,6 +68,13 @@
- allwinner,drive = <0>;
- allwinner,pull = <0>;
- };
-+
-+ usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
-+ allwinner,pins = "PH12";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
- };
-
- uart0: serial@01c28000 {
-@@ -66,4 +96,14 @@
- gpio = <&pio 7 19 0>;
- };
- };
-+
-+ reg_usb1_vbus: usb1-vbus {
-+ status = "okay";
-+ };
-+
-+ reg_usb2_vbus: usb2-vbus {
-+ pinctrl-0 = <&usb2_vbus_pin_hackberry>;
-+ gpio = <&pio 7 12 0>;
-+ status = "okay";
-+ };
- };
---- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
-+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
-@@ -13,16 +13,47 @@
-
- /dts-v1/;
- /include/ "sun4i-a10.dtsi"
-+/include/ "sunxi-common-regulators.dtsi"
-
- / {
- model = "PineRiver Mini X-Plus";
- compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10";
-
- soc@01c00000 {
-+ usbphy: phy@01c13400 {
-+ usb1_vbus-supply = <&reg_usb1_vbus>;
-+ usb2_vbus-supply = <&reg_usb2_vbus>;
-+ status = "okay";
-+ };
-+
-+ ehci0: usb@01c14000 {
-+ status = "okay";
-+ };
-+
-+ ohci0: usb@01c14400 {
-+ status = "okay";
-+ };
-+
-+ ehci1: usb@01c1c000 {
-+ status = "okay";
-+ };
-+
-+ ohci1: usb@01c1c400 {
-+ status = "okay";
-+ };
-+
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
- };
-+
-+ reg_usb1_vbus: usb1-vbus {
-+ status = "okay";
-+ };
-+
-+ reg_usb2_vbus: usb2-vbus {
-+ status = "okay";
-+ };
- };
---- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
-+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
-@@ -12,6 +12,7 @@
-
- /dts-v1/;
- /include/ "sun4i-a10.dtsi"
-+/include/ "sunxi-common-regulators.dtsi"
-
- / {
- model = "LinkSprite pcDuino";
-@@ -33,6 +34,28 @@
- };
- };
-
-+ usbphy: phy@01c13400 {
-+ usb1_vbus-supply = <&reg_usb1_vbus>;
-+ usb2_vbus-supply = <&reg_usb2_vbus>;
-+ status = "okay";
-+ };
-+
-+ ehci0: usb@01c14000 {
-+ status = "okay";
-+ };
-+
-+ ohci0: usb@01c14400 {
-+ status = "okay";
-+ };
-+
-+ ehci1: usb@01c1c000 {
-+ status = "okay";
-+ };
-+
-+ ohci1: usb@01c1c400 {
-+ status = "okay";
-+ };
-+
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
-@@ -45,4 +68,12 @@
- status = "okay";
- };
- };
-+
-+ reg_usb1_vbus: usb1-vbus {
-+ status = "okay";
-+ };
-+
-+ reg_usb2_vbus: usb2-vbus {
-+ status = "okay";
-+ };
- };
---- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
-+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
-@@ -34,11 +34,33 @@
- };
- };
-
-+ usbphy: phy@01c13400 {
-+ usb1_vbus-supply = <&reg_usb1_vbus>;
-+ usb2_vbus-supply = <&reg_usb2_vbus>;
-+ status = "okay";
-+ };
-+
-+ ehci0: usb@01c14000 {
-+ status = "okay";
-+ };
-+
-+ ohci0: usb@01c14400 {
-+ status = "okay";
-+ };
-+
- ahci: sata@01c18000 {
- target-supply = <&reg_ahci_5v>;
- status = "okay";
- };
-
-+ ehci1: usb@01c1c000 {
-+ status = "okay";
-+ };
-+
-+ ohci1: usb@01c1c400 {
-+ status = "okay";
-+ };
-+
- pinctrl@01c20800 {
- led_pins_cubieboard: led_pins@0 {
- allwinner,pins = "PH20", "PH21";
-@@ -87,4 +109,12 @@
- reg_ahci_5v: ahci-5v {
- status = "okay";
- };
-+
-+ reg_usb1_vbus: usb1-vbus {
-+ status = "okay";
-+ };
-+
-+ reg_usb2_vbus: usb2-vbus {
-+ status = "okay";
-+ };
- };
diff --git a/target/linux/sunxi/patches-3.14/164-dt-sun5i-add-usb-host-to-boards.patch b/target/linux/sunxi/patches-3.14/164-dt-sun5i-add-usb-host-to-boards.patch
deleted file mode 100644
index 9776f5ba5c..0000000000
--- a/target/linux/sunxi/patches-3.14/164-dt-sun5i-add-usb-host-to-boards.patch
+++ /dev/null
@@ -1,121 +0,0 @@
-From 9f193366e6094f6e2087c4767e7e413a395bf0d2 Mon Sep 17 00:00:00 2001
-From: Roman Byshko <rbyshko@gmail.com>
-Date: Tue, 24 Sep 2013 20:07:53 +0200
-Subject: [PATCH] ARM: sun5i: dt: Add USB host nodes to A13-Olinuxino
-
-Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
-
-Signed-off-by: Roman Byshko <rbyshko@gmail.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 27 +++++++++++++++++++++++++++
- 1 file changed, 27 insertions(+)
-
---- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
-+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
-@@ -13,12 +13,26 @@
-
- /dts-v1/;
- /include/ "sun5i-a13.dtsi"
-+/include/ "sunxi-common-regulators.dtsi"
-
- / {
- model = "Olimex A13-Olinuxino";
- compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13";
-
- soc@01c00000 {
-+ usbphy: phy@01c13400 {
-+ usb1_vbus-supply = <&reg_usb1_vbus>;
-+ status = "okay";
-+ };
-+
-+ ehci0: usb@01c14000 {
-+ status = "okay";
-+ };
-+
-+ ohci0: usb@01c14400 {
-+ status = "okay";
-+ };
-+
- pinctrl@01c20800 {
- led_pins_olinuxino: led_pins@0 {
- allwinner,pins = "PG9";
-@@ -26,6 +40,13 @@
- allwinner,drive = <1>;
- allwinner,pull = <0>;
- };
-+
-+ usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
-+ allwinner,pins = "PG11";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
- };
-
- uart1: serial@01c28400 {
-@@ -63,4 +84,10 @@
- default-state = "on";
- };
- };
-+
-+ reg_usb1_vbus: usb1-vbus {
-+ pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
-+ gpio = <&pio 6 11 0>;
-+ status = "okay";
-+ };
- };
---- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
-+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
-@@ -14,12 +14,26 @@
-
- /dts-v1/;
- /include/ "sun5i-a13.dtsi"
-+/include/ "sunxi-common-regulators.dtsi"
-
- / {
- model = "Olimex A13-Olinuxino Micro";
- compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
-
- soc@01c00000 {
-+ usbphy: phy@01c13400 {
-+ usb1_vbus-supply = <&reg_usb1_vbus>;
-+ status = "okay";
-+ };
-+
-+ ehci0: usb@01c14000 {
-+ status = "okay";
-+ };
-+
-+ ohci0: usb@01c14400 {
-+ status = "okay";
-+ };
-+
- pinctrl@01c20800 {
- led_pins_olinuxinom: led_pins@0 {
- allwinner,pins = "PG9";
-@@ -27,6 +41,13 @@
- allwinner,drive = <1>;
- allwinner,pull = <0>;
- };
-+
-+ usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 {
-+ allwinner,pins = "PG11";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
- };
-
- uart1: serial@01c28400 {
-@@ -65,4 +86,10 @@
- default-state = "on";
- };
- };
-+
-+ reg_usb1_vbus: usb1-vbus {
-+ pinctrl-0 = <&usb1_vbus_pin_olinuxinom>;
-+ gpio = <&pio 6 11 0>;
-+ status = "okay";
-+ };
- };
diff --git a/target/linux/sunxi/patches-3.14/165-dt-sun7i-add-usb-host-to-boards.patch b/target/linux/sunxi/patches-3.14/165-dt-sun7i-add-usb-host-to-boards.patch
deleted file mode 100644
index 6bfb1b5c13..0000000000
--- a/target/linux/sunxi/patches-3.14/165-dt-sun7i-add-usb-host-to-boards.patch
+++ /dev/null
@@ -1,161 +0,0 @@
-From 56de1b69bf6782338193e373cee06fff252b31da Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Tue, 17 Dec 2013 23:04:57 +0100
-Subject: [PATCH] ARM: sun7i: dt: Add USB host nodes to cubietruck dts
-
-Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 30 ++++++++++++++++++++++++++++++
- 1 file changed, 30 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-@@ -20,11 +20,33 @@
- compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
-
- soc@01c00000 {
-+ usbphy: phy@01c13400 {
-+ usb1_vbus-supply = <&reg_usb1_vbus>;
-+ usb2_vbus-supply = <&reg_usb2_vbus>;
-+ status = "okay";
-+ };
-+
-+ ehci0: usb@01c14000 {
-+ status = "okay";
-+ };
-+
-+ ohci0: usb@01c14400 {
-+ status = "okay";
-+ };
-+
- ahci: sata@01c18000 {
- target-supply = <&reg_ahci_5v>;
- status = "okay";
- };
-
-+ ehci1: usb@01c1c000 {
-+ status = "okay";
-+ };
-+
-+ ohci1: usb@01c1c400 {
-+ status = "okay";
-+ };
-+
- pinctrl@01c20800 {
- ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
- allwinner,pins = "PH12";
-@@ -123,4 +145,12 @@
- gpio = <&pio 7 12 0>;
- status = "okay";
- };
-+
-+ reg_usb1_vbus: usb1-vbus {
-+ status = "okay";
-+ };
-+
-+ reg_usb2_vbus: usb2-vbus {
-+ status = "okay";
-+ };
- };
---- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
-@@ -20,11 +20,33 @@
- compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
-
- soc@01c00000 {
-+ usbphy: phy@01c13400 {
-+ usb1_vbus-supply = <&reg_usb1_vbus>;
-+ usb2_vbus-supply = <&reg_usb2_vbus>;
-+ status = "okay";
-+ };
-+
-+ ehci0: usb@01c14000 {
-+ status = "okay";
-+ };
-+
-+ ohci0: usb@01c14400 {
-+ status = "okay";
-+ };
-+
- ahci: sata@01c18000 {
- target-supply = <&reg_ahci_5v>;
- status = "okay";
- };
-
-+ ehci1: usb@01c1c000 {
-+ status = "okay";
-+ };
-+
-+ ohci1: usb@01c1c400 {
-+ status = "okay";
-+ };
-+
- pinctrl@01c20800 {
- led_pins_cubieboard2: led_pins@0 {
- allwinner,pins = "PH20", "PH21";
-@@ -84,4 +106,12 @@
- reg_ahci_5v: ahci-5v {
- status = "okay";
- };
-+
-+ reg_usb1_vbus: usb1-vbus {
-+ status = "okay";
-+ };
-+
-+ reg_usb2_vbus: usb2-vbus {
-+ status = "okay";
-+ };
- };
---- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
-@@ -31,6 +31,20 @@
- status = "okay";
- };
-
-+ usbphy: phy@01c13400 {
-+ usb1_vbus-supply = <&reg_usb1_vbus>;
-+ usb2_vbus-supply = <&reg_usb2_vbus>;
-+ status = "okay";
-+ };
-+
-+ ehci0: usb@01c14000 {
-+ status = "okay";
-+ };
-+
-+ ohci0: usb@01c14400 {
-+ status = "okay";
-+ };
-+
- spi2: spi@01c17000 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi2_pins_a>;
-@@ -42,6 +56,14 @@
- status = "okay";
- };
-
-+ ehci1: usb@01c1c000 {
-+ status = "okay";
-+ };
-+
-+ ohci1: usb@01c1c400 {
-+ status = "okay";
-+ };
-+
- pinctrl@01c20800 {
- led_pins_olinuxino: led_pins@0 {
- allwinner,pins = "PH2";
-@@ -115,4 +137,12 @@
- reg_ahci_5v: ahci-5v {
- status = "okay";
- };
-+
-+ reg_usb1_vbus: usb1-vbus {
-+ status = "okay";
-+ };
-+
-+ reg_usb2_vbus: usb2-vbus {
-+ status = "okay";
-+ };
- };
diff --git a/target/linux/sunxi/patches-3.14/170-input-add-sun4i-ts-driver.patch b/target/linux/sunxi/patches-3.14/170-input-add-sun4i-ts-driver.patch
deleted file mode 100644
index bde35b1f12..0000000000
--- a/target/linux/sunxi/patches-3.14/170-input-add-sun4i-ts-driver.patch
+++ /dev/null
@@ -1,341 +0,0 @@
-From afbd58e1b1219cbcbe2cc07273fc51f658891e9b Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Mon, 23 Dec 2013 16:21:02 +0100
-Subject: [PATCH] input: Add new sun4i-ts driver for Allwinner sunxi SoC's rtp
- controller
-
-Note the sun4i-ts controller is capable of detecting a second touch, but when
-a second touch is present then the accuracy becomes so bad the reported touch
-location is not useable.
-
-The original android driver contains some complicated heuristics using the
-aprox. distance between the 2 touches to see if the user is making a pinch
-open / close movement, and then reports emulated multi-touch events around
-the last touch coordinate (as the dual-touch coordinates are worthless).
-
-These kinds of heuristics are just asking for trouble (and don't belong
-in the kernel). So this driver offers straight forward, reliable single
-touch functionality only.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- .../bindings/input/touchscreen/sun4i.txt | 15 ++
- drivers/input/touchscreen/Kconfig | 10 +
- drivers/input/touchscreen/Makefile | 1 +
- drivers/input/touchscreen/sun4i-ts.c | 262 +++++++++++++++++++++
- 4 files changed, 288 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/input/touchscreen/sun4i.txt
- create mode 100644 drivers/input/touchscreen/sun4i-ts.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt
-@@ -0,0 +1,15 @@
-+sun4i resistive touchscreen controller
-+--------------------------------------
-+
-+Required properties:
-+ - compatible: "allwinner,sun4i-ts"
-+ - reg: mmio address range of the chip
-+ - interrupts: interrupt to which the chip is connected
-+
-+Example:
-+
-+ rtp: rtp@01c25000 {
-+ compatible = "allwinner,sun4i-ts";
-+ reg = <0x01c25000 0x100>;
-+ interrupts = <29>;
-+ };
---- a/drivers/input/touchscreen/Kconfig
-+++ b/drivers/input/touchscreen/Kconfig
-@@ -906,6 +906,16 @@ config TOUCHSCREEN_STMPE
- To compile this driver as a module, choose M here: the
- module will be called stmpe-ts.
-
-+config TOUCHSCREEN_SUN4I
-+ tristate "Allwinner sun4i resistive touchscreen controller support"
-+ depends on ARCH_SUNXI
-+ help
-+ This selects support for the resistive touchscreen controller
-+ found on Allwinner sunxi SoCs.
-+
-+ To compile this driver as a module, choose M here: the
-+ module will be called sun4i-ts.
-+
- config TOUCHSCREEN_SUR40
- tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
- depends on USB
---- a/drivers/input/touchscreen/Makefile
-+++ b/drivers/input/touchscreen/Makefile
-@@ -54,6 +54,7 @@ obj-$(CONFIG_TOUCHSCREEN_PIXCIR) += pixc
- obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o
- obj-$(CONFIG_TOUCHSCREEN_ST1232) += st1232.o
- obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o
-+obj-$(CONFIG_TOUCHSCREEN_SUN4I) += sun4i-ts.o
- obj-$(CONFIG_TOUCHSCREEN_SUR40) += sur40.o
- obj-$(CONFIG_TOUCHSCREEN_TI_AM335X_TSC) += ti_am335x_tsc.o
- obj-$(CONFIG_TOUCHSCREEN_TNETV107X) += tnetv107x-ts.o
---- /dev/null
-+++ b/drivers/input/touchscreen/sun4i-ts.c
-@@ -0,0 +1,262 @@
-+/*
-+ * Allwinner sunxi resistive touchscreen controller driver
-+ *
-+ * Copyright (C) 2013 - 2014 Hans de Goede <hdegoede@redhat.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+/*
-+ * The sun4i-ts controller is capable of detecting a second touch, but when a
-+ * second touch is present then the accuracy becomes so bad the reported touch
-+ * location is not useable.
-+ *
-+ * The original android driver contains some complicated heuristics using the
-+ * aprox. distance between the 2 touches to see if the user is making a pinch
-+ * open / close movement, and then reports emulated multi-touch events around
-+ * the last touch coordinate (as the dual-touch coordinates are worthless).
-+ *
-+ * These kinds of heuristics are just asking for trouble (and don't belong
-+ * in the kernel). So this driver offers straight forward, reliable single
-+ * touch functionality only.
-+ */
-+
-+#include <linux/err.h>
-+#include <linux/init.h>
-+#include <linux/input.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of_platform.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+
-+#define TP_CTRL0 0x00
-+#define TP_CTRL1 0x04
-+#define TP_CTRL2 0x08
-+#define TP_CTRL3 0x0c
-+#define TP_INT_FIFOC 0x10
-+#define TP_INT_FIFOS 0x14
-+#define TP_TPR 0x18
-+#define TP_CDAT 0x1c
-+#define TEMP_DATA 0x20
-+#define TP_DATA 0x24
-+
-+/* TP_CTRL0 bits */
-+#define ADC_FIRST_DLY(x) ((x) << 24) /* 8 bits */
-+#define ADC_FIRST_DLY_MODE(x) ((x) << 23)
-+#define ADC_CLK_SEL(x) ((x) << 22)
-+#define ADC_CLK_DIV(x) ((x) << 20) /* 3 bits */
-+#define FS_DIV(x) ((x) << 16) /* 4 bits */
-+#define T_ACQ(x) ((x) << 0) /* 16 bits */
-+
-+/* TP_CTRL1 bits */
-+#define STYLUS_UP_DEBOUN(x) ((x) << 12) /* 8 bits */
-+#define STYLUS_UP_DEBOUN_EN(x) ((x) << 9)
-+#define TOUCH_PAN_CALI_EN(x) ((x) << 6)
-+#define TP_DUAL_EN(x) ((x) << 5)
-+#define TP_MODE_EN(x) ((x) << 4)
-+#define TP_ADC_SELECT(x) ((x) << 3)
-+#define ADC_CHAN_SELECT(x) ((x) << 0) /* 3 bits */
-+
-+/* TP_CTRL2 bits */
-+#define TP_SENSITIVE_ADJUST(x) ((x) << 28) /* 4 bits */
-+#define TP_MODE_SELECT(x) ((x) << 26) /* 2 bits */
-+#define PRE_MEA_EN(x) ((x) << 24)
-+#define PRE_MEA_THRE_CNT(x) ((x) << 0) /* 24 bits */
-+
-+/* TP_CTRL3 bits */
-+#define FILTER_EN(x) ((x) << 2)
-+#define FILTER_TYPE(x) ((x) << 0) /* 2 bits */
-+
-+/* TP_INT_FIFOC irq and fifo mask / control bits */
-+#define TEMP_IRQ_EN(x) ((x) << 18)
-+#define OVERRUN_IRQ_EN(x) ((x) << 17)
-+#define DATA_IRQ_EN(x) ((x) << 16)
-+#define TP_DATA_XY_CHANGE(x) ((x) << 13)
-+#define FIFO_TRIG(x) ((x) << 8) /* 5 bits */
-+#define DATA_DRQ_EN(x) ((x) << 7)
-+#define FIFO_FLUSH(x) ((x) << 4)
-+#define TP_UP_IRQ_EN(x) ((x) << 1)
-+#define TP_DOWN_IRQ_EN(x) ((x) << 0)
-+
-+/* TP_INT_FIFOS irq and fifo status bits */
-+#define TEMP_DATA_PENDING BIT(18)
-+#define FIFO_OVERRUN_PENDING BIT(17)
-+#define FIFO_DATA_PENDING BIT(16)
-+#define TP_IDLE_FLG BIT(2)
-+#define TP_UP_PENDING BIT(1)
-+#define TP_DOWN_PENDING BIT(0)
-+
-+/* TP_TPR bits */
-+#define TEMP_ENABLE(x) ((x) << 16)
-+#define TEMP_PERIOD(x) ((x) << 0) /* t = x * 256 * 16 / clkin */
-+
-+struct sun4i_ts_data {
-+ struct device *dev;
-+ struct input_dev *input;
-+ void __iomem *base;
-+ unsigned int irq;
-+ bool ignore_fifo_data;
-+};
-+
-+static irqreturn_t sun4i_ts_irq(int irq, void *dev_id)
-+{
-+ struct sun4i_ts_data *ts = dev_id;
-+ u32 reg_val, x, y;
-+
-+ reg_val = readl(ts->base + TP_INT_FIFOS);
-+
-+ if (reg_val & FIFO_DATA_PENDING) {
-+ x = readl(ts->base + TP_DATA);
-+ y = readl(ts->base + TP_DATA);
-+ /* The 1st location reported after an up event is unreliable */
-+ if (!ts->ignore_fifo_data) {
-+ input_report_abs(ts->input, ABS_X, x);
-+ input_report_abs(ts->input, ABS_Y, y);
-+ /*
-+ * The hardware has a separate down status bit, but
-+ * that gets set before we get the first location,
-+ * resulting in reporting a click on the old location.
-+ */
-+ input_report_key(ts->input, BTN_TOUCH, 1);
-+ input_sync(ts->input);
-+ } else {
-+ ts->ignore_fifo_data = false;
-+ }
-+ }
-+
-+ if (reg_val & TP_UP_PENDING) {
-+ ts->ignore_fifo_data = true;
-+ input_report_key(ts->input, BTN_TOUCH, 0);
-+ input_sync(ts->input);
-+ }
-+
-+ writel(reg_val, ts->base + TP_INT_FIFOS);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int sun4i_ts_open(struct input_dev *dev)
-+{
-+ struct sun4i_ts_data *ts = input_get_drvdata(dev);
-+
-+ /* Flush, set trig level to 1, enable data and up irqs */
-+ writel(DATA_IRQ_EN(1) | FIFO_TRIG(1) | FIFO_FLUSH(1) | TP_UP_IRQ_EN(1),
-+ ts->base + TP_INT_FIFOC);
-+
-+ return 0;
-+}
-+
-+static void sun4i_ts_close(struct input_dev *dev)
-+{
-+ struct sun4i_ts_data *ts = input_get_drvdata(dev);
-+
-+ /* Deactivate all IRQs */
-+ writel(0, ts->base + TP_INT_FIFOC);
-+}
-+
-+static int sun4i_ts_probe(struct platform_device *pdev)
-+{
-+ struct sun4i_ts_data *ts;
-+ struct device *dev = &pdev->dev;
-+ int ret;
-+
-+ ts = devm_kzalloc(dev, sizeof(struct sun4i_ts_data), GFP_KERNEL);
-+ if (!ts)
-+ return -ENOMEM;
-+
-+ ts->dev = dev;
-+ ts->ignore_fifo_data = true;
-+
-+ ts->input = devm_input_allocate_device(dev);
-+ if (!ts->input)
-+ return -ENOMEM;
-+
-+ ts->input->name = pdev->name;
-+ ts->input->phys = "sun4i_ts/input0";
-+ ts->input->open = sun4i_ts_open;
-+ ts->input->close = sun4i_ts_close;
-+ ts->input->id.bustype = BUS_HOST;
-+ ts->input->id.vendor = 0x0001;
-+ ts->input->id.product = 0x0001;
-+ ts->input->id.version = 0x0100;
-+ ts->input->evbit[0] = BIT(EV_SYN) | BIT(EV_KEY) | BIT(EV_ABS);
-+ set_bit(BTN_TOUCH, ts->input->keybit);
-+ input_set_abs_params(ts->input, ABS_X, 0, 4095, 0, 0);
-+ input_set_abs_params(ts->input, ABS_Y, 0, 4095, 0, 0);
-+ input_set_drvdata(ts->input, ts);
-+
-+ ts->base = devm_ioremap_resource(dev,
-+ platform_get_resource(pdev, IORESOURCE_MEM, 0));
-+ if (IS_ERR(ts->base))
-+ return PTR_ERR(ts->base);
-+
-+ ts->irq = platform_get_irq(pdev, 0);
-+ ret = devm_request_irq(dev, ts->irq, sun4i_ts_irq, 0, "sun4i-ts", ts);
-+ if (ret)
-+ return ret;
-+
-+ /*
-+ * Select HOSC clk, clkin = clk / 6, adc samplefreq = clkin / 8192,
-+ * t_acq = clkin / (16 * 64)
-+ */
-+ writel(ADC_CLK_SEL(0) | ADC_CLK_DIV(2) | FS_DIV(7) | T_ACQ(63),
-+ ts->base + TP_CTRL0);
-+
-+ /*
-+ * sensitive_adjust = 15 : max, which is not all that sensitive,
-+ * tp_mode = 0 : only x and y coordinates, as we don't use dual touch
-+ */
-+ writel(TP_SENSITIVE_ADJUST(15) | TP_MODE_SELECT(0),
-+ ts->base + TP_CTRL2);
-+
-+ /* Enable median filter, type 1 : 5/3 */
-+ writel(FILTER_EN(1) | FILTER_TYPE(1), ts->base + TP_CTRL3);
-+
-+ /* Enable temperature measurement, period 1953 (2 seconds) */
-+ writel(TEMP_ENABLE(1) | TEMP_PERIOD(1953), ts->base + TP_TPR);
-+
-+ /*
-+ * Set stylus up debounce to aprox 10 ms, enable debounce, and
-+ * finally enable tp mode.
-+ */
-+ writel(STYLUS_UP_DEBOUN(5) | STYLUS_UP_DEBOUN_EN(1) | TP_MODE_EN(1),
-+ ts->base + TP_CTRL1);
-+
-+ ret = input_register_device(ts->input);
-+ if (ret)
-+ return ret;
-+
-+ platform_set_drvdata(pdev, ts);
-+ return 0;
-+}
-+
-+static const struct of_device_id sun4i_ts_of_match[] = {
-+ { .compatible = "allwinner,sun4i-ts", },
-+ { /* sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, sun4i_ts_of_match);
-+
-+static struct platform_driver sun4i_ts_driver = {
-+ .driver = {
-+ .owner = THIS_MODULE,
-+ .name = "sun4i-ts",
-+ .of_match_table = of_match_ptr(sun4i_ts_of_match),
-+ },
-+ .probe = sun4i_ts_probe,
-+};
-+
-+module_platform_driver(sun4i_ts_driver);
-+
-+MODULE_DESCRIPTION("Allwinner sun4i resistive touchscreen controller driver");
-+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/sunxi/patches-3.14/171-input-add-temp-sensor-support.patch b/target/linux/sunxi/patches-3.14/171-input-add-temp-sensor-support.patch
deleted file mode 100644
index bad8df7687..0000000000
--- a/target/linux/sunxi/patches-3.14/171-input-add-temp-sensor-support.patch
+++ /dev/null
@@ -1,256 +0,0 @@
-From d8b5553dbf60e519d565dbd83327b08865e960e2 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Fri, 27 Dec 2013 15:25:28 +0100
-Subject: [PATCH] input: sun4i-ts: Add support for temperature sensor
-
-The sun4i resisitive touchscreen controller also comes with a built-in
-temperature sensor. This commit adds support for it.
-
-This commit also introduces a new "ts-attached" device-tree property,
-when this is not set, the input part of the driver won't register. This way
-the internal temperature sensor can be used to measure the SoC temperature
-independent of there actually being a touchscreen attached to the controller.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- .../bindings/input/touchscreen/sun4i.txt | 5 +
- drivers/input/touchscreen/sun4i-ts.c | 140 ++++++++++++++++-----
- 2 files changed, 114 insertions(+), 31 deletions(-)
-
---- a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt
-+++ b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt
-@@ -6,10 +6,15 @@ Required properties:
- - reg: mmio address range of the chip
- - interrupts: interrupt to which the chip is connected
-
-+Optional properties:
-+ - allwinner,ts-attached: boolean indicating that an actual touchscreen is
-+ attached to the controller
-+
- Example:
-
- rtp: rtp@01c25000 {
- compatible = "allwinner,sun4i-ts";
- reg = <0x01c25000 0x100>;
- interrupts = <29>;
-+ allwinner,ts-attached;
- };
---- a/drivers/input/touchscreen/sun4i-ts.c
-+++ b/drivers/input/touchscreen/sun4i-ts.c
-@@ -3,6 +3,9 @@
- *
- * Copyright (C) 2013 - 2014 Hans de Goede <hdegoede@redhat.com>
- *
-+ * The hwmon parts are based on work by Corentin LABBE which is:
-+ * Copyright (C) 2013 Corentin LABBE <clabbe.montjoie@gmail.com>
-+ *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
-@@ -30,6 +33,7 @@
- */
-
- #include <linux/err.h>
-+#include <linux/hwmon.h>
- #include <linux/init.h>
- #include <linux/input.h>
- #include <linux/interrupt.h>
-@@ -106,14 +110,12 @@ struct sun4i_ts_data {
- void __iomem *base;
- unsigned int irq;
- bool ignore_fifo_data;
-+ int temp_data;
- };
-
--static irqreturn_t sun4i_ts_irq(int irq, void *dev_id)
-+static void sun4i_ts_irq_handle_input(struct sun4i_ts_data *ts, u32 reg_val)
- {
-- struct sun4i_ts_data *ts = dev_id;
-- u32 reg_val, x, y;
--
-- reg_val = readl(ts->base + TP_INT_FIFOS);
-+ u32 x, y;
-
- if (reg_val & FIFO_DATA_PENDING) {
- x = readl(ts->base + TP_DATA);
-@@ -139,6 +141,20 @@ static irqreturn_t sun4i_ts_irq(int irq,
- input_report_key(ts->input, BTN_TOUCH, 0);
- input_sync(ts->input);
- }
-+}
-+
-+static irqreturn_t sun4i_ts_irq(int irq, void *dev_id)
-+{
-+ struct sun4i_ts_data *ts = dev_id;
-+ u32 reg_val;
-+
-+ reg_val = readl(ts->base + TP_INT_FIFOS);
-+
-+ if (reg_val & TEMP_DATA_PENDING)
-+ ts->temp_data = readl(ts->base + TEMP_DATA);
-+
-+ if (ts->input)
-+ sun4i_ts_irq_handle_input(ts, reg_val);
-
- writel(reg_val, ts->base + TP_INT_FIFOS);
-
-@@ -149,9 +165,9 @@ static int sun4i_ts_open(struct input_de
- {
- struct sun4i_ts_data *ts = input_get_drvdata(dev);
-
-- /* Flush, set trig level to 1, enable data and up irqs */
-- writel(DATA_IRQ_EN(1) | FIFO_TRIG(1) | FIFO_FLUSH(1) | TP_UP_IRQ_EN(1),
-- ts->base + TP_INT_FIFOC);
-+ /* Flush, set trig level to 1, enable temp, data and up irqs */
-+ writel(TEMP_IRQ_EN(1) | DATA_IRQ_EN(1) | FIFO_TRIG(1) | FIFO_FLUSH(1) |
-+ TP_UP_IRQ_EN(1), ts->base + TP_INT_FIFOC);
-
- return 0;
- }
-@@ -160,15 +176,48 @@ static void sun4i_ts_close(struct input_
- {
- struct sun4i_ts_data *ts = input_get_drvdata(dev);
-
-- /* Deactivate all IRQs */
-- writel(0, ts->base + TP_INT_FIFOC);
-+ /* Deactivate all input IRQs */
-+ writel(TEMP_IRQ_EN(1), ts->base + TP_INT_FIFOC);
-+}
-+
-+static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
-+ char *buf)
-+{
-+ struct sun4i_ts_data *ts = dev_get_drvdata(dev);
-+
-+ /* No temp_data until the first irq */
-+ if (ts->temp_data == -1)
-+ return -EAGAIN;
-+
-+ return sprintf(buf, "%d\n", (ts->temp_data - 1447) * 100);
-+}
-+
-+static ssize_t show_temp_label(struct device *dev,
-+ struct device_attribute *devattr, char *buf)
-+{
-+ return sprintf(buf, "SoC temperature\n");
- }
-
-+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
-+static DEVICE_ATTR(temp1_label, S_IRUGO, show_temp_label, NULL);
-+
-+static struct attribute *sun4i_ts_attrs[] = {
-+ &dev_attr_temp1_input.attr,
-+ &dev_attr_temp1_label.attr,
-+ NULL
-+};
-+ATTRIBUTE_GROUPS(sun4i_ts);
-+
- static int sun4i_ts_probe(struct platform_device *pdev)
- {
- struct sun4i_ts_data *ts;
- struct device *dev = &pdev->dev;
-+ struct device_node *np = dev->of_node;
-+ struct device *hwmon;
- int ret;
-+ bool ts_attached;
-+
-+ ts_attached = of_property_read_bool(np, "allwinner,ts-attached");
-
- ts = devm_kzalloc(dev, sizeof(struct sun4i_ts_data), GFP_KERNEL);
- if (!ts)
-@@ -176,24 +225,27 @@ static int sun4i_ts_probe(struct platfor
-
- ts->dev = dev;
- ts->ignore_fifo_data = true;
-+ ts->temp_data = -1;
-
-- ts->input = devm_input_allocate_device(dev);
-- if (!ts->input)
-- return -ENOMEM;
--
-- ts->input->name = pdev->name;
-- ts->input->phys = "sun4i_ts/input0";
-- ts->input->open = sun4i_ts_open;
-- ts->input->close = sun4i_ts_close;
-- ts->input->id.bustype = BUS_HOST;
-- ts->input->id.vendor = 0x0001;
-- ts->input->id.product = 0x0001;
-- ts->input->id.version = 0x0100;
-- ts->input->evbit[0] = BIT(EV_SYN) | BIT(EV_KEY) | BIT(EV_ABS);
-- set_bit(BTN_TOUCH, ts->input->keybit);
-- input_set_abs_params(ts->input, ABS_X, 0, 4095, 0, 0);
-- input_set_abs_params(ts->input, ABS_Y, 0, 4095, 0, 0);
-- input_set_drvdata(ts->input, ts);
-+ if (ts_attached) {
-+ ts->input = devm_input_allocate_device(dev);
-+ if (!ts->input)
-+ return -ENOMEM;
-+
-+ ts->input->name = pdev->name;
-+ ts->input->phys = "sun4i_ts/input0";
-+ ts->input->open = sun4i_ts_open;
-+ ts->input->close = sun4i_ts_close;
-+ ts->input->id.bustype = BUS_HOST;
-+ ts->input->id.vendor = 0x0001;
-+ ts->input->id.product = 0x0001;
-+ ts->input->id.version = 0x0100;
-+ ts->input->evbit[0] = BIT(EV_SYN) | BIT(EV_KEY) | BIT(EV_ABS);
-+ set_bit(BTN_TOUCH, ts->input->keybit);
-+ input_set_abs_params(ts->input, ABS_X, 0, 4095, 0, 0);
-+ input_set_abs_params(ts->input, ABS_Y, 0, 4095, 0, 0);
-+ input_set_drvdata(ts->input, ts);
-+ }
-
- ts->base = devm_ioremap_resource(dev,
- platform_get_resource(pdev, IORESOURCE_MEM, 0));
-@@ -232,14 +284,39 @@ static int sun4i_ts_probe(struct platfor
- writel(STYLUS_UP_DEBOUN(5) | STYLUS_UP_DEBOUN_EN(1) | TP_MODE_EN(1),
- ts->base + TP_CTRL1);
-
-- ret = input_register_device(ts->input);
-- if (ret)
-- return ret;
-+ hwmon = devm_hwmon_device_register_with_groups(ts->dev, "sun4i_ts",
-+ ts, sun4i_ts_groups);
-+ if (IS_ERR(hwmon))
-+ return PTR_ERR(hwmon);
-+
-+ writel(TEMP_IRQ_EN(1), ts->base + TP_INT_FIFOC);
-+
-+ if (ts_attached) {
-+ ret = input_register_device(ts->input);
-+ if (ret) {
-+ writel(0, ts->base + TP_INT_FIFOC);
-+ return ret;
-+ }
-+ }
-
- platform_set_drvdata(pdev, ts);
- return 0;
- }
-
-+static int sun4i_ts_remove(struct platform_device *pdev)
-+{
-+ struct sun4i_ts_data *ts = platform_get_drvdata(pdev);
-+
-+ /* Explicit unregister to avoid open/close changing the imask later */
-+ if (ts->input)
-+ input_unregister_device(ts->input);
-+
-+ /* Deactivate all IRQs */
-+ writel(0, ts->base + TP_INT_FIFOC);
-+
-+ return 0;
-+}
-+
- static const struct of_device_id sun4i_ts_of_match[] = {
- { .compatible = "allwinner,sun4i-ts", },
- { /* sentinel */ }
-@@ -253,6 +330,7 @@ static struct platform_driver sun4i_ts_d
- .of_match_table = of_match_ptr(sun4i_ts_of_match),
- },
- .probe = sun4i_ts_probe,
-+ .remove = sun4i_ts_remove,
- };
-
- module_platform_driver(sun4i_ts_driver);
diff --git a/target/linux/sunxi/patches-3.14/172-input-add-lradc-keys-driver.patch b/target/linux/sunxi/patches-3.14/172-input-add-lradc-keys-driver.patch
deleted file mode 100644
index 859a7f1a67..0000000000
--- a/target/linux/sunxi/patches-3.14/172-input-add-lradc-keys-driver.patch
+++ /dev/null
@@ -1,326 +0,0 @@
-From 3f8fd9b9e2daefb7be4c46369f86af1c7bb2f1ca Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Wed, 1 Jan 2014 19:44:49 +0100
-Subject: [PATCH] input: Add new sun4i-lradc-keys driver
-
-Allwinnner sunxi SoCs have a low resolution adc (called lradc) which is
-specifically designed to have various (tablet) keys (ie home, back, search,
-etc). attached to it using a resistor network. This adds a driver for this.
-
-There are 2 channels, currently this driver only supports chan0 since there
-are no boards known to use chan1. The devicetree properties are already
-prefixed with chan0 as preparation for chan1 support in the future.
-
-This has been tested on an olimex a10s-olinuxino-micro, a13-olinuxino, and
-a20-olinuxino-micro.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- .../devicetree/bindings/input/sun4i-lradc-keys.txt | 22 ++
- drivers/input/keyboard/Kconfig | 10 +
- drivers/input/keyboard/Makefile | 1 +
- drivers/input/keyboard/sun4i-lradc-keys.c | 243 +++++++++++++++++++++
- 4 files changed, 276 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt
- create mode 100644 drivers/input/keyboard/sun4i-lradc-keys.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt
-@@ -0,0 +1,22 @@
-+Allwinner sun4i low res adc attached tablet keys
-+------------------------------------------------
-+
-+Required properties:
-+ - compatible: "allwinner,sun4i-lradc-keys"
-+ - reg: mmio address range of the chip
-+ - interrupts: interrupt to which the chip is connected
-+ - allwinner,chan0-step: step in mV between keys must be 150 or 200
-+ - linux,chan0-keycodes: array of dt-bindings/input/input.h KEY_ codes
-+
-+Example:
-+
-+#include <dt-bindings/input/input.h>
-+
-+ lradc: lradc@01c22800 {
-+ compatible = "allwinner,sun4i-lradc-keys";
-+ reg = <0x01c22800 0x100>;
-+ interrupts = <31>;
-+ allwinner,chan0-step = <200>;
-+ linux,chan0-keycodes = <KEY_VOLUMEUP KEY_VOLUMEDOWN
-+ KEY_MENU KEY_ENTER KEY_HOME>;
-+ };
---- a/drivers/input/keyboard/Kconfig
-+++ b/drivers/input/keyboard/Kconfig
-@@ -544,6 +544,16 @@ config KEYBOARD_STMPE
- To compile this driver as a module, choose M here: the module will be
- called stmpe-keypad.
-
-+config KEYBOARD_SUN4I_LRADC
-+ tristate "Allwinner sun4i low res adc attached tablet keys support"
-+ depends on ARCH_SUNXI
-+ help
-+ This selects support for the Allwinner low res adc attached tablet
-+ keys found on Allwinner sunxi SoCs.
-+
-+ To compile this driver as a module, choose M here: the
-+ module will be called sun4i-lradc-keys.
-+
- config KEYBOARD_DAVINCI
- tristate "TI DaVinci Key Scan"
- depends on ARCH_DAVINCI_DM365
---- a/drivers/input/keyboard/Makefile
-+++ b/drivers/input/keyboard/Makefile
-@@ -50,6 +50,7 @@ obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_k
- obj-$(CONFIG_KEYBOARD_SPEAR) += spear-keyboard.o
- obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o
- obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o
-+obj-$(CONFIG_KEYBOARD_SUN4I_LRADC) += sun4i-lradc-keys.o
- obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o
- obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o
- obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o
---- /dev/null
-+++ b/drivers/input/keyboard/sun4i-lradc-keys.c
-@@ -0,0 +1,243 @@
-+/*
-+ * Allwinner sun4i low res adc attached tablet keys driver
-+ *
-+ * Copyright (C) 2014 Hans de Goede <hdegoede@redhat.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+/*
-+ * Allwinnner sunxi SoCs have a lradc which is specifically designed to have
-+ * various (tablet) keys (ie home, back, search, etc). attached to it using
-+ * a resistor network. This driver is for the keys on such boards.
-+ *
-+ * There are 2 channels, currently this driver only supports chan0 since there
-+ * are no boards known to use chan1. The devicetree properties are already
-+ * prefixed with chan0 as preparation for chan1 support in the future.
-+ */
-+
-+#include <linux/err.h>
-+#include <linux/init.h>
-+#include <linux/input.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of_platform.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+
-+#define LRADC_CTRL 0x00
-+#define LRADC_INTC 0x04
-+#define LRADC_INTS 0x08
-+#define LRADC_DATA0 0x0c
-+#define LRADC_DATA1 0x10
-+
-+/* LRADC_CTRL bits */
-+#define FIRST_CONVERT_DLY(x) ((x) << 24) /* 8 bits */
-+#define CHAN_SELECT(x) ((x) << 22) /* 2 bits */
-+#define CONTINUE_TIME_SEL(x) ((x) << 16) /* 4 bits */
-+#define KEY_MODE_SEL(x) ((x) << 12) /* 2 bits */
-+#define LEVELA_B_CNT(x) ((x) << 8) /* 4 bits */
-+#define HOLD_EN(x) ((x) << 6)
-+#define LEVELB_VOL(x) ((x) << 4) /* 2 bits */
-+#define SAMPLE_RATE(x) ((x) << 2) /* 2 bits */
-+#define ENABLE(x) ((x) << 0)
-+
-+/* LRADC_INTC and LRADC_INTS bits */
-+#define CHAN1_KEYUP_IRQ BIT(12)
-+#define CHAN1_ALRDY_HOLD_IRQ BIT(11)
-+#define CHAN1_HOLD_IRQ BIT(10)
-+#define CHAN1_KEYDOWN_IRQ BIT(9)
-+#define CHAN1_DATA_IRQ BIT(8)
-+#define CHAN0_KEYUP_IRQ BIT(4)
-+#define CHAN0_ALRDY_HOLD_IRQ BIT(3)
-+#define CHAN0_HOLD_IRQ BIT(2)
-+#define CHAN0_KEYDOWN_IRQ BIT(1)
-+#define CHAN0_DATA_IRQ BIT(0)
-+
-+#define MAX_KEYS 13
-+
-+/* Lookup table to map the adc val to a keycode index for 150 mv step size */
-+static const u8 adc_val_to_key_index_step150[64] = {
-+ 0, 0, 0,
-+ 1, 1, 1, 1, 1,
-+ 2, 2, 2, 2, 2,
-+ 3, 3, 3, 3,
-+ 4, 4, 4, 4, 4,
-+ 5, 5, 5, 5, 5,
-+ 6, 6, 6, 6, 6,
-+ 7, 7, 7, 7,
-+ 8, 8, 8, 8, 8,
-+ 9, 9, 9, 9, 9,
-+ 10, 10, 10, 10,
-+ 11, 11, 11, 11,
-+ 12, 12, 12, 12, 12, 12, 12, 12, 12, 12
-+};
-+
-+/* Lookup table to map the adc val to a keycode index for 200 mv step size */
-+static const u8 adc_val_to_key_index_step200[64] = {
-+ 0, 0, 0, 0, 0, 0, 0, 0,
-+ 1, 1, 1, 1, 1, 1, 1,
-+ 2, 2, 2, 2, 2, 2, 2,
-+ 3, 3, 3, 3, 3, 3,
-+ 4, 4, 4, 4, 4, 4,
-+ 5, 5, 5, 5, 5, 5,
-+ 6, 6, 6, 6, 6, 6, 6, 6, 6, 6,
-+ 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-+};
-+
-+struct sun4i_lradc_data {
-+ struct device *dev;
-+ struct input_dev *input;
-+ void __iomem *base;
-+ u32 chan0_step;
-+ u32 chan0_keycode;
-+ u32 chan0_keycodes[MAX_KEYS];
-+};
-+
-+static irqreturn_t sun4i_lradc_irq(int irq, void *dev_id)
-+{
-+ struct sun4i_lradc_data *lradc = dev_id;
-+ u32 ints, val;
-+
-+ ints = readl(lradc->base + LRADC_INTS);
-+
-+ /*
-+ * lradc supports only one keypress at a time, release does not give
-+ * any info as to which key was released, so we cache the keycode.
-+ */
-+ if ((ints & CHAN0_KEYDOWN_IRQ) && lradc->chan0_keycode == 0) {
-+ val = readl(lradc->base + LRADC_DATA0);
-+ if (lradc->chan0_step == 150)
-+ val = adc_val_to_key_index_step150[val];
-+ else
-+ val = adc_val_to_key_index_step200[val];
-+
-+ lradc->chan0_keycode = lradc->chan0_keycodes[val];
-+ input_report_key(lradc->input, lradc->chan0_keycode, 1);
-+ }
-+
-+ if (ints & CHAN0_KEYUP_IRQ) {
-+ input_report_key(lradc->input, lradc->chan0_keycode, 0);
-+ lradc->chan0_keycode = 0;
-+ }
-+
-+ input_sync(lradc->input);
-+
-+ writel(ints, lradc->base + LRADC_INTS);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int sun4i_lradc_open(struct input_dev *dev)
-+{
-+ struct sun4i_lradc_data *lradc = input_get_drvdata(dev);
-+
-+ /*
-+ * Set sample time to 16 ms / 62.5 Hz. Wait 2 * 16 ms for key to
-+ * stabilize on press, wait (1 + 1) * 16 ms for key release
-+ */
-+ writel(FIRST_CONVERT_DLY(2) | LEVELA_B_CNT(1) | HOLD_EN(1) |
-+ SAMPLE_RATE(2) | ENABLE(1), lradc->base + LRADC_CTRL);
-+
-+ writel(CHAN0_KEYUP_IRQ | CHAN0_KEYDOWN_IRQ, lradc->base + LRADC_INTC);
-+
-+ return 0;
-+}
-+
-+static void sun4i_lradc_close(struct input_dev *dev)
-+{
-+ struct sun4i_lradc_data *lradc = input_get_drvdata(dev);
-+
-+ /* Disable lradc, leave other settings unchanged */
-+ writel(FIRST_CONVERT_DLY(2) | LEVELA_B_CNT(1) | HOLD_EN(1) |
-+ SAMPLE_RATE(2), lradc->base + LRADC_CTRL);
-+ writel(0, lradc->base + LRADC_INTC);
-+}
-+
-+static int sun4i_lradc_probe(struct platform_device *pdev)
-+{
-+ struct sun4i_lradc_data *lradc;
-+ struct device *dev = &pdev->dev;
-+ struct device_node *np = dev->of_node;
-+ int i, ret;
-+
-+ lradc = devm_kzalloc(dev, sizeof(struct sun4i_lradc_data), GFP_KERNEL);
-+ if (!lradc)
-+ return -ENOMEM;
-+
-+ ret = of_property_read_u32(np, "allwinner,chan0-step",
-+ &lradc->chan0_step);
-+ if (ret || (lradc->chan0_step != 150 && lradc->chan0_step != 200)) {
-+ dev_err(dev, "Invalid allwinner,chan0-step dt-property\n");
-+ return -EINVAL;
-+ }
-+
-+ for (i = 0; i < MAX_KEYS; i++)
-+ of_property_read_u32_index(np, "linux,chan0-keycodes",
-+ i, &lradc->chan0_keycodes[i]);
-+
-+ lradc->dev = dev;
-+ lradc->input = devm_input_allocate_device(dev);
-+ if (!lradc->input)
-+ return -ENOMEM;
-+
-+ lradc->input->name = pdev->name;
-+ lradc->input->phys = "sun4i_lradc/input0";
-+ lradc->input->open = sun4i_lradc_open;
-+ lradc->input->close = sun4i_lradc_close;
-+ lradc->input->id.bustype = BUS_HOST;
-+ lradc->input->id.vendor = 0x0001;
-+ lradc->input->id.product = 0x0001;
-+ lradc->input->id.version = 0x0100;
-+ lradc->input->evbit[0] = BIT(EV_SYN) | BIT(EV_KEY);
-+ for (i = 0; i < MAX_KEYS; i++)
-+ set_bit(lradc->chan0_keycodes[i], lradc->input->keybit);
-+ input_set_drvdata(lradc->input, lradc);
-+
-+ lradc->base = devm_ioremap_resource(dev,
-+ platform_get_resource(pdev, IORESOURCE_MEM, 0));
-+ if (IS_ERR(lradc->base))
-+ return PTR_ERR(lradc->base);
-+
-+ ret = devm_request_irq(dev, platform_get_irq(pdev, 0), sun4i_lradc_irq,
-+ 0, "sun4i-lradc-keys", lradc);
-+ if (ret)
-+ return ret;
-+
-+ ret = input_register_device(lradc->input);
-+ if (ret)
-+ return ret;
-+
-+ platform_set_drvdata(pdev, lradc);
-+ return 0;
-+}
-+
-+static const struct of_device_id sun4i_lradc_of_match[] = {
-+ { .compatible = "allwinner,sun4i-lradc-keys", },
-+ { /* sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, sun4i_lradc_of_match);
-+
-+static struct platform_driver sun4i_lradc_driver = {
-+ .driver = {
-+ .owner = THIS_MODULE,
-+ .name = "sun4i-lradc-keys",
-+ .of_match_table = of_match_ptr(sun4i_lradc_of_match),
-+ },
-+ .probe = sun4i_lradc_probe,
-+};
-+
-+module_platform_driver(sun4i_lradc_driver);
-+
-+MODULE_DESCRIPTION("Allwinner sun4i low res adc attached tablet keys driver");
-+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/sunxi/patches-3.14/173-1-dt-sun4i-add-lradc-node.patch b/target/linux/sunxi/patches-3.14/173-1-dt-sun4i-add-lradc-node.patch
deleted file mode 100644
index 544528d8e7..0000000000
--- a/target/linux/sunxi/patches-3.14/173-1-dt-sun4i-add-lradc-node.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 87d0c26803eec56971c8a7e6299aefc4d72dfb3c Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Wed, 1 Jan 2014 19:51:36 +0100
-Subject: [PATCH] ARM: dts: sun4i: Add lradc node
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun4i-a10.dtsi | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/arch/arm/boot/dts/sun4i-a10.dtsi
-+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
-@@ -549,6 +549,13 @@
- interrupts = <24>;
- };
-
-+ lradc: lradc@01c22800 {
-+ compatible = "allwinner,sun4i-lradc-keys";
-+ reg = <0x01c22800 0x100>;
-+ interrupts = <31>;
-+ status = "disabled";
-+ };
-+
- sid: eeprom@01c23800 {
- compatible = "allwinner,sun4i-sid";
- reg = <0x01c23800 0x10>;
diff --git a/target/linux/sunxi/patches-3.14/173-2-dt-sun5i-add-lradc-node.patch b/target/linux/sunxi/patches-3.14/173-2-dt-sun5i-add-lradc-node.patch
deleted file mode 100644
index 6fa1c2b9f6..0000000000
--- a/target/linux/sunxi/patches-3.14/173-2-dt-sun5i-add-lradc-node.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 9041b1f6118b32929e6357affb53db28439a11e7 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Wed, 1 Jan 2014 19:50:33 +0100
-Subject: [PATCH] ARM: dts: sun5i: Add lradc node
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 8 ++++++++
- arch/arm/boot/dts/sun5i-a10s.dtsi | 7 +++++++
- arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 8 ++++++++
- arch/arm/boot/dts/sun5i-a13.dtsi | 7 +++++++
- 4 files changed, 30 insertions(+)
-
---- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
-+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
-@@ -14,6 +14,7 @@
- /dts-v1/;
- /include/ "sun5i-a13.dtsi"
- /include/ "sunxi-common-regulators.dtsi"
-+#include <dt-bindings/input/input.h>
-
- / {
- model = "Olimex A13-Olinuxino";
-@@ -49,6 +50,13 @@
- };
- };
-
-+ lradc: lradc@01c22800 {
-+ allwinner,chan0-step = <200>;
-+ linux,chan0-keycodes = <KEY_VOLUMEUP KEY_VOLUMEDOWN
-+ KEY_MENU KEY_ENTER KEY_HOME>;
-+ status = "okay";
-+ };
-+
- uart1: serial@01c28400 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins_b>;
---- a/arch/arm/boot/dts/sun5i-a13.dtsi
-+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
-@@ -429,6 +429,13 @@
- reg = <0x01c20c90 0x10>;
- };
-
-+ lradc: lradc@01c22800 {
-+ compatible = "allwinner,sun4i-lradc-keys";
-+ reg = <0x01c22800 0x100>;
-+ interrupts = <31>;
-+ status = "disabled";
-+ };
-+
- sid: eeprom@01c23800 {
- compatible = "allwinner,sun4i-sid";
- reg = <0x01c23800 0x10>;
diff --git a/target/linux/sunxi/patches-3.14/173-3-dt-sun7i-add-lradc-node.patch b/target/linux/sunxi/patches-3.14/173-3-dt-sun7i-add-lradc-node.patch
deleted file mode 100644
index 44e9f53cbc..0000000000
--- a/target/linux/sunxi/patches-3.14/173-3-dt-sun7i-add-lradc-node.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 98e21d18a26032912bf6c979f084c200a94e976b Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Wed, 1 Jan 2014 20:26:21 +0100
-Subject: [PATCH] ARM: dts: sun7i: Add lradc node
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 9 +++++++++
- arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++
- 2 files changed, 16 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
-@@ -14,6 +14,7 @@
- /dts-v1/;
- /include/ "sun7i-a20.dtsi"
- /include/ "sunxi-common-regulators.dtsi"
-+#include <dt-bindings/input/input.h>
-
- / {
- model = "Olimex A20-Olinuxino Micro";
-@@ -73,6 +74,14 @@
- };
- };
-
-+ lradc: lradc@01c22800 {
-+ allwinner,chan0-step = <200>;
-+ linux,chan0-keycodes = <KEY_VOLUMEUP KEY_VOLUMEDOWN
-+ KEY_MENU KEY_SEARCH KEY_HOME
-+ KEY_ESC KEY_ENTER>;
-+ status = "okay";
-+ };
-+
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -670,6 +670,13 @@
- interrupts = <0 24 4>;
- };
-
-+ lradc: lradc@01c22800 {
-+ compatible = "allwinner,sun4i-lradc-keys";
-+ reg = <0x01c22800 0x100>;
-+ interrupts = <0 31 4>;
-+ status = "disabled";
-+ };
-+
- sid: eeprom@01c23800 {
- compatible = "allwinner,sun7i-a20-sid";
- reg = <0x01c23800 0x200>;
diff --git a/target/linux/sunxi/patches-3.14/175-reset-add-of_reset_control_get.patch b/target/linux/sunxi/patches-3.14/175-reset-add-of_reset_control_get.patch
deleted file mode 100644
index 3b6db99dbf..0000000000
--- a/target/linux/sunxi/patches-3.14/175-reset-add-of_reset_control_get.patch
+++ /dev/null
@@ -1,112 +0,0 @@
-From bfea2b9be28b20e076d5df8863c25e966f413fa3 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Fri, 20 Dec 2013 22:41:07 +0100
-Subject: [PATCH] reset: Add of_reset_control_get
-
-In some cases, you might need to deassert from reset an hardware block that
-doesn't associated to a struct device (CPUs, timers, etc.).
-
-Add a small helper to retrieve the reset controller from the device tree
-without the need to pass a struct device.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- drivers/reset/core.c | 39 ++++++++++++++++++++++++++++++---------
- include/linux/reset.h | 4 ++++
- 2 files changed, 34 insertions(+), 9 deletions(-)
-
---- a/drivers/reset/core.c
-+++ b/drivers/reset/core.c
-@@ -127,15 +127,16 @@ int reset_control_deassert(struct reset_
- EXPORT_SYMBOL_GPL(reset_control_deassert);
-
- /**
-- * reset_control_get - Lookup and obtain a reference to a reset controller.
-- * @dev: device to be reset by the controller
-+ * of_reset_control_get - Lookup and obtain a reference to a reset controller.
-+ * @node: device to be reset by the controller
- * @id: reset line name
- *
- * Returns a struct reset_control or IS_ERR() condition containing errno.
- *
- * Use of id names is optional.
- */
--struct reset_control *reset_control_get(struct device *dev, const char *id)
-+struct reset_control *of_reset_control_get(struct device_node *node,
-+ const char *id)
- {
- struct reset_control *rstc = ERR_PTR(-EPROBE_DEFER);
- struct reset_controller_dev *r, *rcdev;
-@@ -144,13 +145,10 @@ struct reset_control *reset_control_get(
- int rstc_id;
- int ret;
-
-- if (!dev)
-- return ERR_PTR(-EINVAL);
--
- if (id)
-- index = of_property_match_string(dev->of_node,
-+ index = of_property_match_string(node,
- "reset-names", id);
-- ret = of_parse_phandle_with_args(dev->of_node, "resets", "#reset-cells",
-+ ret = of_parse_phandle_with_args(node, "resets", "#reset-cells",
- index, &args);
- if (ret)
- return ERR_PTR(ret);
-@@ -185,12 +183,35 @@ struct reset_control *reset_control_get(
- return ERR_PTR(-ENOMEM);
- }
-
-- rstc->dev = dev;
- rstc->rcdev = rcdev;
- rstc->id = rstc_id;
-
- return rstc;
- }
-+EXPORT_SYMBOL_GPL(of_reset_control_get);
-+
-+/**
-+ * reset_control_get - Lookup and obtain a reference to a reset controller.
-+ * @dev: device to be reset by the controller
-+ * @id: reset line name
-+ *
-+ * Returns a struct reset_control or IS_ERR() condition containing errno.
-+ *
-+ * Use of id names is optional.
-+ */
-+struct reset_control *reset_control_get(struct device *dev, const char *id)
-+{
-+ struct reset_control *rstc;
-+
-+ if (!dev)
-+ return ERR_PTR(-EINVAL);
-+
-+ rstc = of_reset_control_get(dev->of_node, id);
-+ if (!IS_ERR(rstc))
-+ rstc->dev = dev;
-+
-+ return rstc;
-+}
- EXPORT_SYMBOL_GPL(reset_control_get);
-
- /**
---- a/include/linux/reset.h
-+++ b/include/linux/reset.h
-@@ -1,6 +1,8 @@
- #ifndef _LINUX_RESET_H_
- #define _LINUX_RESET_H_
-
-+#include <linux/of.h>
-+
- struct device;
- struct reset_control;
-
-@@ -8,6 +10,8 @@ int reset_control_reset(struct reset_con
- int reset_control_assert(struct reset_control *rstc);
- int reset_control_deassert(struct reset_control *rstc);
-
-+struct reset_control *of_reset_control_get(struct device_node *node,
-+ const char *id);
- struct reset_control *reset_control_get(struct device *dev, const char *id);
- void reset_control_put(struct reset_control *rstc);
- struct reset_control *devm_reset_control_get(struct device *dev, const char *id);
diff --git a/target/linux/sunxi/patches-3.14/176-clk-sun5i-add-support-for-reset-ctrler.patch b/target/linux/sunxi/patches-3.14/176-clk-sun5i-add-support-for-reset-ctrler.patch
deleted file mode 100644
index 3986d193b1..0000000000
--- a/target/linux/sunxi/patches-3.14/176-clk-sun5i-add-support-for-reset-ctrler.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From 3ec31fa2ce161d35f787354037f94d9d22d825d1 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Fri, 20 Dec 2013 22:41:08 +0100
-Subject: [PATCH] clocksource: sun5i: Add support for reset controller
-
-The Allwinner A31 that uses this timer has the timer IP asserted in reset.
-Add an optional reset property to the DT, and deassert the timer from reset if
-it's there.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- .../devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt | 4 ++++
- drivers/clocksource/timer-sun5i.c | 6 ++++++
- 2 files changed, 10 insertions(+)
-
---- a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
-+++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
-@@ -9,6 +9,9 @@ Required properties:
- one)
- - clocks: phandle to the source clock (usually the AHB clock)
-
-+Optionnal properties:
-+- resets: phandle to a reset controller asserting the timer
-+
- Example:
-
- timer@01c60000 {
-@@ -19,4 +22,5 @@ timer@01c60000 {
- <0 53 1>,
- <0 54 1>;
- clocks = <&ahb1_gates 19>;
-+ resets = <&ahb1rst 19>;
- };
---- a/drivers/clocksource/timer-sun5i.c
-+++ b/drivers/clocksource/timer-sun5i.c
-@@ -16,6 +16,7 @@
- #include <linux/interrupt.h>
- #include <linux/irq.h>
- #include <linux/irqreturn.h>
-+#include <linux/reset.h>
- #include <linux/sched_clock.h>
- #include <linux/of.h>
- #include <linux/of_address.h>
-@@ -143,6 +144,7 @@ static u64 sun5i_timer_sched_read(void)
-
- static void __init sun5i_timer_init(struct device_node *node)
- {
-+ struct reset_control *rstc;
- unsigned long rate;
- struct clk *clk;
- int ret, irq;
-@@ -162,6 +164,10 @@ static void __init sun5i_timer_init(stru
- clk_prepare_enable(clk);
- rate = clk_get_rate(clk);
-
-+ rstc = of_reset_control_get(node, NULL);
-+ if (!IS_ERR(rstc))
-+ reset_control_deassert(rstc);
-+
- writel(~0, timer_base + TIMER_INTVAL_LO_REG(1));
- writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
- timer_base + TIMER_CTL_REG(1));
diff --git a/target/linux/sunxi/patches-3.14/180-clk-sunxi-add-clock-output-names-dt-prop-support.patch b/target/linux/sunxi/patches-3.14/180-clk-sunxi-add-clock-output-names-dt-prop-support.patch
deleted file mode 100644
index 73caeb9ba3..0000000000
--- a/target/linux/sunxi/patches-3.14/180-clk-sunxi-add-clock-output-names-dt-prop-support.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 0bf618fda3ad24649add0bf943d16a9b4f5c3463 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Mon, 3 Feb 2014 09:51:37 +0800
-Subject: [PATCH] clk: sunxi: add clock-output-names dt property support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-sunxi clock drivers use dt node name as clock name, but clock
-nodes should be named clk@X, so the names would be the same.
-Let the drivers read clock names from dt clock-output-names
-property.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Acked-by: Mike Turquette <mturquette@linaro.org>
-Signed-off-by: Emilio López <emilio@elopez.com.ar>
----
- drivers/clk/sunxi/clk-sunxi.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/clk/sunxi/clk-sunxi.c
-+++ b/drivers/clk/sunxi/clk-sunxi.c
-@@ -51,6 +51,8 @@ static void __init sun4i_osc_clk_setup(s
- if (!gate)
- goto err_free_fixed;
-
-+ of_property_read_string(node, "clock-output-names", &clk_name);
-+
- /* set up gate and fixed rate properties */
- gate->reg = of_iomap(node, 0);
- gate->bit_idx = SUNXI_OSC24M_GATE;
-@@ -601,6 +603,8 @@ static void __init sunxi_mux_clk_setup(s
- (parents[i] = of_clk_get_parent_name(node, i)) != NULL)
- i++;
-
-+ of_property_read_string(node, "clock-output-names", &clk_name);
-+
- clk = clk_register_mux(NULL, clk_name, parents, i,
- CLK_SET_RATE_NO_REPARENT, reg,
- data->shift, SUNXI_MUX_GATE_WIDTH,
-@@ -660,6 +664,8 @@ static void __init sunxi_divider_clk_set
-
- clk_parent = of_clk_get_parent_name(node, 0);
-
-+ of_property_read_string(node, "clock-output-names", &clk_name);
-+
- clk = clk_register_divider(NULL, clk_name, clk_parent, 0,
- reg, data->shift, data->width,
- data->pow ? CLK_DIVIDER_POWER_OF_TWO : 0,
diff --git a/target/linux/sunxi/patches-3.14/181-clk-sunxi-add-names-for-pll56.patch b/target/linux/sunxi/patches-3.14/181-clk-sunxi-add-names-for-pll56.patch
deleted file mode 100644
index 4229fa4f1c..0000000000
--- a/target/linux/sunxi/patches-3.14/181-clk-sunxi-add-names-for-pll56.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From 8f3156f3f2b70128b2761526c208c8e3bfda694e Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Mon, 3 Feb 2014 09:51:39 +0800
-Subject: [PATCH] clk: sunxi: add names for pll5, pll6 parent clocks to
- factors_data
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Some factor clocks, such as the parent clock of pll5 and pll6, have
-multiple output names. Add the corresponding names to factors_data
-tied to compatible string.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Acked-by: Mike Turquette <mturquette@linaro.org>
-Signed-off-by: Emilio López <emilio@elopez.com.ar>
----
- drivers/clk/sunxi/clk-sunxi.c | 27 ++++++++++++++++++---------
- 1 file changed, 18 insertions(+), 9 deletions(-)
-
---- a/drivers/clk/sunxi/clk-sunxi.c
-+++ b/drivers/clk/sunxi/clk-sunxi.c
-@@ -389,6 +389,7 @@ struct factors_data {
- int mux;
- struct clk_factors_config *table;
- void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p);
-+ const char *name;
- };
-
- static struct clk_factors_config sun4i_pll1_config = {
-@@ -457,6 +458,14 @@ static const struct factors_data sun4i_p
- .enable = 31,
- .table = &sun4i_pll5_config,
- .getter = sun4i_get_pll5_factors,
-+ .name = "pll5",
-+};
-+
-+static const struct factors_data sun4i_pll6_data __initconst = {
-+ .enable = 31,
-+ .table = &sun4i_pll5_config,
-+ .getter = sun4i_get_pll5_factors,
-+ .name = "pll6",
- };
-
- static const struct factors_data sun4i_apb1_data __initconst = {
-@@ -499,14 +508,14 @@ static struct clk * __init sunxi_factors
- (parents[i] = of_clk_get_parent_name(node, i)) != NULL)
- i++;
-
-- /* Nodes should be providing the name via clock-output-names
-- * but originally our dts didn't, and so we used node->name.
-- * The new, better nodes look like clk@deadbeef, so we pull the
-- * name just in this case */
-- if (!strcmp("clk", clk_name)) {
-- of_property_read_string_index(node, "clock-output-names",
-- 0, &clk_name);
-- }
-+ /*
-+ * some factor clocks, such as pll5 and pll6, may have multiple
-+ * outputs, and have their name designated in factors_data
-+ */
-+ if (data->name)
-+ clk_name = data->name;
-+ else
-+ of_property_read_string(node, "clock-output-names", &clk_name);
-
- factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL);
- if (!factors)
-@@ -838,7 +847,7 @@ static const struct divs_data pll5_divs_
- };
-
- static const struct divs_data pll6_divs_data __initconst = {
-- .factors = &sun4i_pll5_data,
-+ .factors = &sun4i_pll6_data,
- .div = {
- { .shift = 0, .table = pll6_sata_tbl, .gate = 14 }, /* M, SATA */
- { .fixed = 2 }, /* P, other */
diff --git a/target/linux/sunxi/patches-3.14/182-clk-sunxi-add-support-for-usb-clockreg-reset.patch b/target/linux/sunxi/patches-3.14/182-clk-sunxi-add-support-for-usb-clockreg-reset.patch
deleted file mode 100644
index e8977362c7..0000000000
--- a/target/linux/sunxi/patches-3.14/182-clk-sunxi-add-support-for-usb-clockreg-reset.patch
+++ /dev/null
@@ -1,128 +0,0 @@
-From 0643a93746775da2189ab0afd8f748afcaa791c5 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Fri, 7 Feb 2014 16:21:49 +0100
-Subject: [PATCH] clk: sunxi: Add support for USB clock-register reset bits
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The usb-clk register is special in that it not only contains clk gate bits,
-but also has a few reset bits. This commit adds support for this by allowing
-gates type sunxi clks to also register a reset controller.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
-Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Signed-off-by: Emilio López <emilio@elopez.com.ar>
----
- drivers/clk/sunxi/clk-sunxi.c | 71 +++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 71 insertions(+)
-
---- a/drivers/clk/sunxi/clk-sunxi.c
-+++ b/drivers/clk/sunxi/clk-sunxi.c
-@@ -18,6 +18,7 @@
- #include <linux/clkdev.h>
- #include <linux/of.h>
- #include <linux/of_address.h>
-+#include <linux/reset-controller.h>
-
- #include "clk-factors.h"
-
-@@ -688,6 +689,59 @@ static void __init sunxi_divider_clk_set
-
-
- /**
-+ * sunxi_gates_reset... - reset bits in leaf gate clk registers handling
-+ */
-+
-+struct gates_reset_data {
-+ void __iomem *reg;
-+ spinlock_t *lock;
-+ struct reset_controller_dev rcdev;
-+};
-+
-+static int sunxi_gates_reset_assert(struct reset_controller_dev *rcdev,
-+ unsigned long id)
-+{
-+ struct gates_reset_data *data = container_of(rcdev,
-+ struct gates_reset_data,
-+ rcdev);
-+ unsigned long flags;
-+ u32 reg;
-+
-+ spin_lock_irqsave(data->lock, flags);
-+
-+ reg = readl(data->reg);
-+ writel(reg & ~BIT(id), data->reg);
-+
-+ spin_unlock_irqrestore(data->lock, flags);
-+
-+ return 0;
-+}
-+
-+static int sunxi_gates_reset_deassert(struct reset_controller_dev *rcdev,
-+ unsigned long id)
-+{
-+ struct gates_reset_data *data = container_of(rcdev,
-+ struct gates_reset_data,
-+ rcdev);
-+ unsigned long flags;
-+ u32 reg;
-+
-+ spin_lock_irqsave(data->lock, flags);
-+
-+ reg = readl(data->reg);
-+ writel(reg | BIT(id), data->reg);
-+
-+ spin_unlock_irqrestore(data->lock, flags);
-+
-+ return 0;
-+}
-+
-+static struct reset_control_ops sunxi_gates_reset_ops = {
-+ .assert = sunxi_gates_reset_assert,
-+ .deassert = sunxi_gates_reset_deassert,
-+};
-+
-+/**
- * sunxi_gates_clk_setup() - Setup function for leaf gates on clocks
- */
-
-@@ -695,6 +749,7 @@ static void __init sunxi_divider_clk_set
-
- struct gates_data {
- DECLARE_BITMAP(mask, SUNXI_GATES_MAX_SIZE);
-+ u32 reset_mask;
- };
-
- static const struct gates_data sun4i_axi_gates_data __initconst = {
-@@ -765,6 +820,7 @@ static void __init sunxi_gates_clk_setup
- struct gates_data *data)
- {
- struct clk_onecell_data *clk_data;
-+ struct gates_reset_data *reset_data;
- const char *clk_parent;
- const char *clk_name;
- void *reg;
-@@ -808,6 +864,21 @@ static void __init sunxi_gates_clk_setup
- clk_data->clk_num = i;
-
- of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+
-+ /* Register a reset controler for gates with reset bits */
-+ if (data->reset_mask == 0)
-+ return;
-+
-+ reset_data = kzalloc(sizeof(*reset_data), GFP_KERNEL);
-+ if (!reset_data)
-+ return;
-+
-+ reset_data->reg = reg;
-+ reset_data->lock = &clk_lock;
-+ reset_data->rcdev.nr_resets = __fls(data->reset_mask) + 1;
-+ reset_data->rcdev.ops = &sunxi_gates_reset_ops;
-+ reset_data->rcdev.of_node = node;
-+ reset_controller_register(&reset_data->rcdev);
- }
-
-
diff --git a/target/linux/sunxi/patches-3.14/182-clk-sunxi-get-divs-parent-clockname.patch b/target/linux/sunxi/patches-3.14/182-clk-sunxi-get-divs-parent-clockname.patch
deleted file mode 100644
index 777dfde856..0000000000
--- a/target/linux/sunxi/patches-3.14/182-clk-sunxi-get-divs-parent-clockname.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 0566b74f93eaf6b2281d2605a63e06e6ba809334 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Mon, 3 Feb 2014 09:51:40 +0800
-Subject: [PATCH] clk: sunxi: get divs parent clock name from parent factor
- clock
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Divs clocks consist of a parent factor clock with multiple outputs,
-and seperate clocks for each output. Get the name of the parent
-clock from the parent factor clock, instead of the DT node name.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Acked-by: Mike Turquette <mturquette@linaro.org>
-Signed-off-by: Emilio López <emilio@elopez.com.ar>
----
- drivers/clk/sunxi/clk-sunxi.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/clk/sunxi/clk-sunxi.c
-+++ b/drivers/clk/sunxi/clk-sunxi.c
-@@ -940,7 +940,7 @@ static void __init sunxi_divs_clk_setup(
- struct divs_data *data)
- {
- struct clk_onecell_data *clk_data;
-- const char *parent = node->name;
-+ const char *parent;
- const char *clk_name;
- struct clk **clks, *pclk;
- struct clk_hw *gate_hw, *rate_hw;
-@@ -954,6 +954,7 @@ static void __init sunxi_divs_clk_setup(
-
- /* Set up factor clock that we will be dividing */
- pclk = sunxi_factors_clk_setup(node, data->factors);
-+ parent = __clk_get_name(pclk);
-
- reg = of_iomap(node, 0);
-
diff --git a/target/linux/sunxi/patches-3.14/183-clk-sunxi-add-usb-clockreg-defs.patch b/target/linux/sunxi/patches-3.14/183-clk-sunxi-add-usb-clockreg-defs.patch
deleted file mode 100644
index c79f803198..0000000000
--- a/target/linux/sunxi/patches-3.14/183-clk-sunxi-add-usb-clockreg-defs.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From c61dfeb17581d32360a817ba40636aaed85caade Mon Sep 17 00:00:00 2001
-From: Roman Byshko <rbyshko@gmail.com>
-Date: Fri, 7 Feb 2014 16:21:50 +0100
-Subject: [PATCH] clk: sunxi: Add USB clock register defintions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add register definitions for the usb-clk register found on sun4i, sun5i and
-sun7i SoCs.
-
-Signed-off-by: Roman Byshko <rbyshko@gmail.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Signed-off-by: Emilio López <emilio@elopez.com.ar>
----
- Documentation/devicetree/bindings/clock/sunxi.txt | 5 +++++
- drivers/clk/sunxi/clk-sunxi.c | 12 ++++++++++++
- 2 files changed, 17 insertions(+)
-
---- a/Documentation/devicetree/bindings/clock/sunxi.txt
-+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
-@@ -37,6 +37,8 @@ Required properties:
- "allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
- "allwinner,sun4i-mod0-clk" - for the module 0 family of clocks
- "allwinner,sun7i-a20-out-clk" - for the external output clocks
-+ "allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
-+ "allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13
-
- Required properties for all clocks:
- - reg : shall be the control register address for the clock.
-@@ -49,6 +51,9 @@ Required properties for all clocks:
- Additionally, "allwinner,*-gates-clk" clocks require:
- - clock-output-names : the corresponding gate names that the clock controls
-
-+And "allwinner,*-usb-clk" clocks also require:
-+- reset-cells : shall be set to 1
-+
- Clock consumers should specify the desired clocks they use with a
- "clocks" phandle cell. Consumers that are using a gated clock should
- provide an additional ID in their clock property. This ID is the
---- a/drivers/clk/sunxi/clk-sunxi.c
-+++ b/drivers/clk/sunxi/clk-sunxi.c
-@@ -816,6 +816,16 @@ static const struct gates_data sun7i_a20
- .mask = { 0xff80ff },
- };
-
-+static const struct gates_data sun4i_a10_usb_gates_data __initconst = {
-+ .mask = {0x1C0},
-+ .reset_mask = 0x07,
-+};
-+
-+static const struct gates_data sun5i_a13_usb_gates_data __initconst = {
-+ .mask = {0x140},
-+ .reset_mask = 0x03,
-+};
-+
- static void __init sunxi_gates_clk_setup(struct device_node *node,
- struct gates_data *data)
- {
-@@ -1107,6 +1117,8 @@ static const struct of_device_id clk_gat
- {.compatible = "allwinner,sun6i-a31-apb1-gates-clk", .data = &sun6i_a31_apb1_gates_data,},
- {.compatible = "allwinner,sun7i-a20-apb1-gates-clk", .data = &sun7i_a20_apb1_gates_data,},
- {.compatible = "allwinner,sun6i-a31-apb2-gates-clk", .data = &sun6i_a31_apb2_gates_data,},
-+ {.compatible = "allwinner,sun4i-a10-usb-clk", .data = &sun4i_a10_usb_gates_data,},
-+ {.compatible = "allwinner,sun5i-a13-usb-clk", .data = &sun5i_a13_usb_gates_data,},
- {}
- };
-
diff --git a/target/linux/sunxi/patches-3.14/184-clk-sunxi-add-pll6-on-a31.patch b/target/linux/sunxi/patches-3.14/184-clk-sunxi-add-pll6-on-a31.patch
deleted file mode 100644
index 7193c5029b..0000000000
--- a/target/linux/sunxi/patches-3.14/184-clk-sunxi-add-pll6-on-a31.patch
+++ /dev/null
@@ -1,104 +0,0 @@
-From c225f78660cd61914f25dd00499c7ae71d1d6919 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Wed, 5 Feb 2014 14:05:03 +0100
-Subject: [PATCH] clk: sunxi: Add support for PLL6 on the A31
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The A31 has a slightly different PLL6 clock. Add support for this new clock in
-our driver.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Signed-off-by: Emilio López <emilio@elopez.com.ar>
----
- Documentation/devicetree/bindings/clock/sunxi.txt | 1 +
- drivers/clk/sunxi/clk-sunxi.c | 45 +++++++++++++++++++++++
- 2 files changed, 46 insertions(+)
-
---- a/Documentation/devicetree/bindings/clock/sunxi.txt
-+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
-@@ -11,6 +11,7 @@ Required properties:
- "allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
- "allwinner,sun4i-pll5-clk" - for the PLL5 clock
- "allwinner,sun4i-pll6-clk" - for the PLL6 clock
-+ "allwinner,sun6i-a31-pll6-clk" - for the PLL6 clock on A31
- "allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
- "allwinner,sun4i-axi-clk" - for the AXI clock
- "allwinner,sun4i-axi-gates-clk" - for the AXI gates
---- a/drivers/clk/sunxi/clk-sunxi.c
-+++ b/drivers/clk/sunxi/clk-sunxi.c
-@@ -252,7 +252,38 @@ static void sun4i_get_pll5_factors(u32 *
- *n = DIV_ROUND_UP(div, (*k+1));
- }
-
-+/**
-+ * sun6i_a31_get_pll6_factors() - calculates n, k factors for A31 PLL6
-+ * PLL6 rate is calculated as follows
-+ * rate = parent_rate * n * (k + 1) / 2
-+ * parent_rate is always 24Mhz
-+ */
-+
-+static void sun6i_a31_get_pll6_factors(u32 *freq, u32 parent_rate,
-+ u8 *n, u8 *k, u8 *m, u8 *p)
-+{
-+ u8 div;
-+
-+ /*
-+ * We always have 24MHz / 2, so we can just say that our
-+ * parent clock is 12MHz.
-+ */
-+ parent_rate = parent_rate / 2;
-+
-+ /* Normalize value to a parent_rate multiple (24M / 2) */
-+ div = *freq / parent_rate;
-+ *freq = parent_rate * div;
-+
-+ /* we were called to round the frequency, we can now return */
-+ if (n == NULL)
-+ return;
-
-+ *k = div / 32;
-+ if (*k > 3)
-+ *k = 3;
-+
-+ *n = DIV_ROUND_UP(div, (*k+1));
-+}
-
- /**
- * sun4i_get_apb1_factors() - calculates m, p factors for APB1
-@@ -420,6 +451,13 @@ static struct clk_factors_config sun4i_p
- .kwidth = 2,
- };
-
-+static struct clk_factors_config sun6i_a31_pll6_config = {
-+ .nshift = 8,
-+ .nwidth = 5,
-+ .kshift = 4,
-+ .kwidth = 2,
-+};
-+
- static struct clk_factors_config sun4i_apb1_config = {
- .mshift = 0,
- .mwidth = 5,
-@@ -469,6 +507,12 @@ static const struct factors_data sun4i_p
- .name = "pll6",
- };
-
-+static const struct factors_data sun6i_a31_pll6_data __initconst = {
-+ .enable = 31,
-+ .table = &sun6i_a31_pll6_config,
-+ .getter = sun6i_a31_get_pll6_factors,
-+};
-+
- static const struct factors_data sun4i_apb1_data __initconst = {
- .table = &sun4i_apb1_config,
- .getter = sun4i_get_apb1_factors,
-@@ -1069,6 +1113,7 @@ free_clkdata:
- static const struct of_device_id clk_factors_match[] __initconst = {
- {.compatible = "allwinner,sun4i-pll1-clk", .data = &sun4i_pll1_data,},
- {.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,},
-+ {.compatible = "allwinner,sun6i-a31-pll6-clk", .data = &sun6i_a31_pll6_data,},
- {.compatible = "allwinner,sun4i-apb1-clk", .data = &sun4i_apb1_data,},
- {.compatible = "allwinner,sun4i-mod0-clk", .data = &sun4i_mod0_data,},
- {.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,},
diff --git a/target/linux/sunxi/patches-3.14/185-clk-sunxi-add-a20-a31-gmac-clock.patch b/target/linux/sunxi/patches-3.14/185-clk-sunxi-add-a20-a31-gmac-clock.patch
deleted file mode 100644
index 86d6301937..0000000000
--- a/target/linux/sunxi/patches-3.14/185-clk-sunxi-add-a20-a31-gmac-clock.patch
+++ /dev/null
@@ -1,175 +0,0 @@
-From dd91dc4b9c55c8fa24738249214274442e2fcbd3 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Mon, 10 Feb 2014 18:35:47 +0800
-Subject: [PATCH] clk: sunxi: Add Allwinner A20/A31 GMAC clock unit
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The Allwinner A20/A31 clock module controls the transmit clock source
-and interface type of the GMAC ethernet controller. Model this as
-a single clock for GMAC drivers to use.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Signed-off-by: Emilio López <emilio@elopez.com.ar>
----
- Documentation/devicetree/bindings/clock/sunxi.txt | 30 +++++++
- drivers/clk/sunxi/clk-sunxi.c | 96 +++++++++++++++++++++++
- 2 files changed, 126 insertions(+)
-
---- a/Documentation/devicetree/bindings/clock/sunxi.txt
-+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
-@@ -38,6 +38,7 @@ Required properties:
- "allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
- "allwinner,sun4i-mod0-clk" - for the module 0 family of clocks
- "allwinner,sun7i-a20-out-clk" - for the external output clocks
-+ "allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
- "allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
- "allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13
-
-@@ -55,6 +56,9 @@ Additionally, "allwinner,*-gates-clk" cl
- And "allwinner,*-usb-clk" clocks also require:
- - reset-cells : shall be set to 1
-
-+For "allwinner,sun7i-a20-gmac-clk", the parent clocks shall be fixed rate
-+dummy clocks at 25 MHz and 125 MHz, respectively. See example.
-+
- Clock consumers should specify the desired clocks they use with a
- "clocks" phandle cell. Consumers that are using a gated clock should
- provide an additional ID in their clock property. This ID is the
-@@ -82,3 +86,29 @@ cpu: cpu@01c20054 {
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>;
- };
-+
-+mii_phy_tx_clk: clk@2 {
-+ #clock-cells = <0>;
-+ compatible = "fixed-clock";
-+ clock-frequency = <25000000>;
-+ clock-output-names = "mii_phy_tx";
-+};
-+
-+gmac_int_tx_clk: clk@3 {
-+ #clock-cells = <0>;
-+ compatible = "fixed-clock";
-+ clock-frequency = <125000000>;
-+ clock-output-names = "gmac_int_tx";
-+};
-+
-+gmac_clk: clk@01c20164 {
-+ #clock-cells = <0>;
-+ compatible = "allwinner,sun7i-a20-gmac-clk";
-+ reg = <0x01c20164 0x4>;
-+ /*
-+ * The first clock must be fixed at 25MHz;
-+ * the second clock must be fixed at 125MHz
-+ */
-+ clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
-+ clock-output-names = "gmac";
-+};
---- a/drivers/clk/sunxi/clk-sunxi.c
-+++ b/drivers/clk/sunxi/clk-sunxi.c
-@@ -411,6 +411,102 @@ static void sun7i_a20_get_out_factors(u3
-
-
- /**
-+ * sun7i_a20_gmac_clk_setup - Setup function for A20/A31 GMAC clock module
-+ *
-+ * This clock looks something like this
-+ * ________________________
-+ * MII TX clock from PHY >-----|___________ _________|----> to GMAC core
-+ * GMAC Int. RGMII TX clk >----|___________\__/__gate---|----> to PHY
-+ * Ext. 125MHz RGMII TX clk >--|__divider__/ |
-+ * |________________________|
-+ *
-+ * The external 125 MHz reference is optional, i.e. GMAC can use its
-+ * internal TX clock just fine. The A31 GMAC clock module does not have
-+ * the divider controls for the external reference.
-+ *
-+ * To keep it simple, let the GMAC use either the MII TX clock for MII mode,
-+ * and its internal TX clock for GMII and RGMII modes. The GMAC driver should
-+ * select the appropriate source and gate/ungate the output to the PHY.
-+ *
-+ * Only the GMAC should use this clock. Altering the clock so that it doesn't
-+ * match the GMAC's operation parameters will result in the GMAC not being
-+ * able to send traffic out. The GMAC driver should set the clock rate and
-+ * enable/disable this clock to configure the required state. The clock
-+ * driver then responds by auto-reparenting the clock.
-+ */
-+
-+#define SUN7I_A20_GMAC_GPIT 2
-+#define SUN7I_A20_GMAC_MASK 0x3
-+#define SUN7I_A20_GMAC_PARENTS 2
-+
-+static void __init sun7i_a20_gmac_clk_setup(struct device_node *node)
-+{
-+ struct clk *clk;
-+ struct clk_mux *mux;
-+ struct clk_gate *gate;
-+ const char *clk_name = node->name;
-+ const char *parents[SUN7I_A20_GMAC_PARENTS];
-+ void *reg;
-+
-+ if (of_property_read_string(node, "clock-output-names", &clk_name))
-+ return;
-+
-+ /* allocate mux and gate clock structs */
-+ mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL);
-+ if (!mux)
-+ return;
-+
-+ gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
-+ if (!gate)
-+ goto free_mux;
-+
-+ /* gmac clock requires exactly 2 parents */
-+ parents[0] = of_clk_get_parent_name(node, 0);
-+ parents[1] = of_clk_get_parent_name(node, 1);
-+ if (!parents[0] || !parents[1])
-+ goto free_gate;
-+
-+ reg = of_iomap(node, 0);
-+ if (!reg)
-+ goto free_gate;
-+
-+ /* set up gate and fixed rate properties */
-+ gate->reg = reg;
-+ gate->bit_idx = SUN7I_A20_GMAC_GPIT;
-+ gate->lock = &clk_lock;
-+ mux->reg = reg;
-+ mux->mask = SUN7I_A20_GMAC_MASK;
-+ mux->flags = CLK_MUX_INDEX_BIT;
-+ mux->lock = &clk_lock;
-+
-+ clk = clk_register_composite(NULL, clk_name,
-+ parents, SUN7I_A20_GMAC_PARENTS,
-+ &mux->hw, &clk_mux_ops,
-+ NULL, NULL,
-+ &gate->hw, &clk_gate_ops,
-+ 0);
-+
-+ if (IS_ERR(clk))
-+ goto iounmap_reg;
-+
-+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
-+ clk_register_clkdev(clk, clk_name, NULL);
-+
-+ return;
-+
-+iounmap_reg:
-+ iounmap(reg);
-+free_gate:
-+ kfree(gate);
-+free_mux:
-+ kfree(mux);
-+}
-+CLK_OF_DECLARE(sun7i_a20_gmac, "allwinner,sun7i-a20-gmac-clk",
-+ sun7i_a20_gmac_clk_setup);
-+
-+
-+
-+/**
- * sunxi_factors_clk_setup() - Setup function for factor clocks
- */
-
diff --git a/target/linux/sunxi/patches-3.14/186-clk-sunxi-add-new-clock-compats.patch b/target/linux/sunxi/patches-3.14/186-clk-sunxi-add-new-clock-compats.patch
deleted file mode 100644
index f842a23912..0000000000
--- a/target/linux/sunxi/patches-3.14/186-clk-sunxi-add-new-clock-compats.patch
+++ /dev/null
@@ -1,178 +0,0 @@
-From 45ff9697ed1668e82ca3902b32309e157464e745 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Thu, 6 Feb 2014 09:55:57 +0100
-Subject: [PATCH] clk: sunxi: Add new clock compatibles
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The Allwinner A10 compatibles were following a slightly different compatible
-patterns than the rest of the SoCs for historical reasons. Add compatibles
-matching the other pattern to the clock driver for consistency, and keep the
-older one for backward compatibility.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Signed-off-by: Emilio López <emilio@elopez.com.ar>
----
- Documentation/devicetree/bindings/clock/sunxi.txt | 36 +++++++++++------------
- drivers/clk/sunxi/clk-sunxi.c | 30 +++++++++----------
- 2 files changed, 33 insertions(+), 33 deletions(-)
-
---- a/Documentation/devicetree/bindings/clock/sunxi.txt
-+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
-@@ -6,37 +6,37 @@ This binding uses the common clock bindi
-
- Required properties:
- - compatible : shall be one of the following:
-- "allwinner,sun4i-osc-clk" - for a gatable oscillator
-- "allwinner,sun4i-pll1-clk" - for the main PLL clock and PLL4
-+ "allwinner,sun4i-a10-osc-clk" - for a gatable oscillator
-+ "allwinner,sun4i-a10-pll1-clk" - for the main PLL clock and PLL4
- "allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
-- "allwinner,sun4i-pll5-clk" - for the PLL5 clock
-- "allwinner,sun4i-pll6-clk" - for the PLL6 clock
-+ "allwinner,sun4i-a10-pll5-clk" - for the PLL5 clock
-+ "allwinner,sun4i-a10-pll6-clk" - for the PLL6 clock
- "allwinner,sun6i-a31-pll6-clk" - for the PLL6 clock on A31
-- "allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
-- "allwinner,sun4i-axi-clk" - for the AXI clock
-- "allwinner,sun4i-axi-gates-clk" - for the AXI gates
-- "allwinner,sun4i-ahb-clk" - for the AHB clock
-- "allwinner,sun4i-ahb-gates-clk" - for the AHB gates on A10
-+ "allwinner,sun4i-a10-cpu-clk" - for the CPU multiplexer clock
-+ "allwinner,sun4i-a10-axi-clk" - for the AXI clock
-+ "allwinner,sun4i-a10-axi-gates-clk" - for the AXI gates
-+ "allwinner,sun4i-a10-ahb-clk" - for the AHB clock
-+ "allwinner,sun4i-a10-ahb-gates-clk" - for the AHB gates on A10
- "allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13
- "allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
- "allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20
- "allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
- "allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
-- "allwinner,sun4i-apb0-clk" - for the APB0 clock
-- "allwinner,sun4i-apb0-gates-clk" - for the APB0 gates on A10
-+ "allwinner,sun4i-a10-apb0-clk" - for the APB0 clock
-+ "allwinner,sun4i-a10-apb0-gates-clk" - for the APB0 gates on A10
- "allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13
- "allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s
- "allwinner,sun7i-a20-apb0-gates-clk" - for the APB0 gates on A20
-- "allwinner,sun4i-apb1-clk" - for the APB1 clock
-- "allwinner,sun4i-apb1-mux-clk" - for the APB1 clock muxing
-- "allwinner,sun4i-apb1-gates-clk" - for the APB1 gates on A10
-+ "allwinner,sun4i-a10-apb1-clk" - for the APB1 clock
-+ "allwinner,sun4i-a10-apb1-mux-clk" - for the APB1 clock muxing
-+ "allwinner,sun4i-a10-apb1-gates-clk" - for the APB1 gates on A10
- "allwinner,sun5i-a13-apb1-gates-clk" - for the APB1 gates on A13
- "allwinner,sun5i-a10s-apb1-gates-clk" - for the APB1 gates on A10s
- "allwinner,sun6i-a31-apb1-gates-clk" - for the APB1 gates on A31
- "allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20
- "allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
- "allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
-- "allwinner,sun4i-mod0-clk" - for the module 0 family of clocks
-+ "allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks
- "allwinner,sun7i-a20-out-clk" - for the external output clocks
- "allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
- "allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
-@@ -68,21 +68,21 @@ For example:
-
- osc24M: osc24M@01c20050 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-osc-clk";
-+ compatible = "allwinner,sun4i-a10-osc-clk";
- reg = <0x01c20050 0x4>;
- clocks = <&osc24M_fixed>;
- };
-
- pll1: pll1@01c20000 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-pll1-clk";
-+ compatible = "allwinner,sun4i-a10-pll1-clk";
- reg = <0x01c20000 0x4>;
- clocks = <&osc24M>;
- };
-
- cpu: cpu@01c20054 {
- #clock-cells = <0>;
-- compatible = "allwinner,sun4i-cpu-clk";
-+ compatible = "allwinner,sun4i-a10-cpu-clk";
- reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll1>;
- };
---- a/drivers/clk/sunxi/clk-sunxi.c
-+++ b/drivers/clk/sunxi/clk-sunxi.c
-@@ -80,7 +80,7 @@ err_free_gate:
- err_free_fixed:
- kfree(fixed);
- }
--CLK_OF_DECLARE(sun4i_osc, "allwinner,sun4i-osc-clk", sun4i_osc_clk_setup);
-+CLK_OF_DECLARE(sun4i_osc, "allwinner,sun4i-a10-osc-clk", sun4i_osc_clk_setup);
-
-
-
-@@ -1207,52 +1207,52 @@ free_clkdata:
-
- /* Matches for factors clocks */
- static const struct of_device_id clk_factors_match[] __initconst = {
-- {.compatible = "allwinner,sun4i-pll1-clk", .data = &sun4i_pll1_data,},
-+ {.compatible = "allwinner,sun4i-a10-pll1-clk", .data = &sun4i_pll1_data,},
- {.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,},
- {.compatible = "allwinner,sun6i-a31-pll6-clk", .data = &sun6i_a31_pll6_data,},
-- {.compatible = "allwinner,sun4i-apb1-clk", .data = &sun4i_apb1_data,},
-- {.compatible = "allwinner,sun4i-mod0-clk", .data = &sun4i_mod0_data,},
-+ {.compatible = "allwinner,sun4i-a10-apb1-clk", .data = &sun4i_apb1_data,},
-+ {.compatible = "allwinner,sun4i-a10-mod0-clk", .data = &sun4i_mod0_data,},
- {.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,},
- {}
- };
-
- /* Matches for divider clocks */
- static const struct of_device_id clk_div_match[] __initconst = {
-- {.compatible = "allwinner,sun4i-axi-clk", .data = &sun4i_axi_data,},
-- {.compatible = "allwinner,sun4i-ahb-clk", .data = &sun4i_ahb_data,},
-- {.compatible = "allwinner,sun4i-apb0-clk", .data = &sun4i_apb0_data,},
-+ {.compatible = "allwinner,sun4i-a10-axi-clk", .data = &sun4i_axi_data,},
-+ {.compatible = "allwinner,sun4i-a10-ahb-clk", .data = &sun4i_ahb_data,},
-+ {.compatible = "allwinner,sun4i-a10-apb0-clk", .data = &sun4i_apb0_data,},
- {.compatible = "allwinner,sun6i-a31-apb2-div-clk", .data = &sun6i_a31_apb2_div_data,},
- {}
- };
-
- /* Matches for divided outputs */
- static const struct of_device_id clk_divs_match[] __initconst = {
-- {.compatible = "allwinner,sun4i-pll5-clk", .data = &pll5_divs_data,},
-- {.compatible = "allwinner,sun4i-pll6-clk", .data = &pll6_divs_data,},
-+ {.compatible = "allwinner,sun4i-a10-pll5-clk", .data = &pll5_divs_data,},
-+ {.compatible = "allwinner,sun4i-a10-pll6-clk", .data = &pll6_divs_data,},
- {}
- };
-
- /* Matches for mux clocks */
- static const struct of_device_id clk_mux_match[] __initconst = {
-- {.compatible = "allwinner,sun4i-cpu-clk", .data = &sun4i_cpu_mux_data,},
-- {.compatible = "allwinner,sun4i-apb1-mux-clk", .data = &sun4i_apb1_mux_data,},
-+ {.compatible = "allwinner,sun4i-a10-cpu-clk", .data = &sun4i_cpu_mux_data,},
-+ {.compatible = "allwinner,sun4i-a10-apb1-mux-clk", .data = &sun4i_apb1_mux_data,},
- {.compatible = "allwinner,sun6i-a31-ahb1-mux-clk", .data = &sun6i_a31_ahb1_mux_data,},
- {}
- };
-
- /* Matches for gate clocks */
- static const struct of_device_id clk_gates_match[] __initconst = {
-- {.compatible = "allwinner,sun4i-axi-gates-clk", .data = &sun4i_axi_gates_data,},
-- {.compatible = "allwinner,sun4i-ahb-gates-clk", .data = &sun4i_ahb_gates_data,},
-+ {.compatible = "allwinner,sun4i-a10-axi-gates-clk", .data = &sun4i_axi_gates_data,},
-+ {.compatible = "allwinner,sun4i-a10-ahb-gates-clk", .data = &sun4i_ahb_gates_data,},
- {.compatible = "allwinner,sun5i-a10s-ahb-gates-clk", .data = &sun5i_a10s_ahb_gates_data,},
- {.compatible = "allwinner,sun5i-a13-ahb-gates-clk", .data = &sun5i_a13_ahb_gates_data,},
- {.compatible = "allwinner,sun6i-a31-ahb1-gates-clk", .data = &sun6i_a31_ahb1_gates_data,},
- {.compatible = "allwinner,sun7i-a20-ahb-gates-clk", .data = &sun7i_a20_ahb_gates_data,},
-- {.compatible = "allwinner,sun4i-apb0-gates-clk", .data = &sun4i_apb0_gates_data,},
-+ {.compatible = "allwinner,sun4i-a10-apb0-gates-clk", .data = &sun4i_apb0_gates_data,},
- {.compatible = "allwinner,sun5i-a10s-apb0-gates-clk", .data = &sun5i_a10s_apb0_gates_data,},
- {.compatible = "allwinner,sun5i-a13-apb0-gates-clk", .data = &sun5i_a13_apb0_gates_data,},
- {.compatible = "allwinner,sun7i-a20-apb0-gates-clk", .data = &sun7i_a20_apb0_gates_data,},
-- {.compatible = "allwinner,sun4i-apb1-gates-clk", .data = &sun4i_apb1_gates_data,},
-+ {.compatible = "allwinner,sun4i-a10-apb1-gates-clk", .data = &sun4i_apb1_gates_data,},
- {.compatible = "allwinner,sun5i-a10s-apb1-gates-clk", .data = &sun5i_a10s_apb1_gates_data,},
- {.compatible = "allwinner,sun5i-a13-apb1-gates-clk", .data = &sun5i_a13_apb1_gates_data,},
- {.compatible = "allwinner,sun6i-a31-apb1-gates-clk", .data = &sun6i_a31_apb1_gates_data,},
diff --git a/target/linux/sunxi/patches-3.14/187-clk-sunxi-automatic-reparenting.patch b/target/linux/sunxi/patches-3.14/187-clk-sunxi-automatic-reparenting.patch
deleted file mode 100644
index 2cd8a263be..0000000000
--- a/target/linux/sunxi/patches-3.14/187-clk-sunxi-automatic-reparenting.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From b416520f239aeaa4207ebe84c22247cff2da444f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar>
-Date: Thu, 5 Sep 2013 19:52:41 -0300
-Subject: [PATCH] clk: sunxi: factors: automatic reparenting support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This commit implements .determine_rate, so that our factor clocks can be
-reparented when needed.
-
-Signed-off-by: Emilio López <emilio@elopez.com.ar>
----
- drivers/clk/sunxi/clk-factors.c | 36 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 36 insertions(+)
-
---- a/drivers/clk/sunxi/clk-factors.c
-+++ b/drivers/clk/sunxi/clk-factors.c
-@@ -77,6 +77,41 @@ static long clk_factors_round_rate(struc
- return rate;
- }
-
-+static long clk_factors_determine_rate(struct clk_hw *hw, unsigned long rate,
-+ unsigned long *best_parent_rate,
-+ struct clk **best_parent_p)
-+{
-+ struct clk *clk = hw->clk, *parent, *best_parent = NULL;
-+ int i, num_parents;
-+ unsigned long parent_rate, best = 0, child_rate, best_child_rate = 0;
-+
-+ /* find the parent that can help provide the fastest rate <= rate */
-+ num_parents = __clk_get_num_parents(clk);
-+ for (i = 0; i < num_parents; i++) {
-+ parent = clk_get_parent_by_index(clk, i);
-+ if (!parent)
-+ continue;
-+ if (__clk_get_flags(clk) & CLK_SET_RATE_PARENT)
-+ parent_rate = __clk_round_rate(parent, rate);
-+ else
-+ parent_rate = __clk_get_rate(parent);
-+
-+ child_rate = clk_factors_round_rate(hw, rate, &parent_rate);
-+
-+ if (child_rate <= rate && child_rate > best_child_rate) {
-+ best_parent = parent;
-+ best = parent_rate;
-+ best_child_rate = child_rate;
-+ }
-+ }
-+
-+ if (best_parent)
-+ *best_parent_p = best_parent;
-+ *best_parent_rate = best;
-+
-+ return best_child_rate;
-+}
-+
- static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
- {
-@@ -113,6 +148,7 @@ static int clk_factors_set_rate(struct c
- }
-
- const struct clk_ops clk_factors_ops = {
-+ .determine_rate = clk_factors_determine_rate,
- .recalc_rate = clk_factors_recalc_rate,
- .round_rate = clk_factors_round_rate,
- .set_rate = clk_factors_set_rate,
diff --git a/target/linux/sunxi/patches-3.14/188-clk-sunxi-implement-mmc-phasectrl.patch b/target/linux/sunxi/patches-3.14/188-clk-sunxi-implement-mmc-phasectrl.patch
deleted file mode 100644
index c191b350f8..0000000000
--- a/target/linux/sunxi/patches-3.14/188-clk-sunxi-implement-mmc-phasectrl.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From 36268d704307282109ec246f65cac2a42c825629 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Emilio=20L=C3=B3pez?= <emilio@elopez.com.ar>
-Date: Fri, 20 Sep 2013 20:29:17 -0300
-Subject: [PATCH] clk: sunxi: Implement MMC phase control
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-HdG: add header exporting clk_sunxi_mmc_phase_control
-
-Signed-off-by: Emilio López <emilio@elopez.com.ar>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- drivers/clk/sunxi/clk-sunxi.c | 35 +++++++++++++++++++++++++++++++++++
- include/linux/clk/sunxi.h | 22 ++++++++++++++++++++++
- 2 files changed, 57 insertions(+)
- create mode 100644 include/linux/clk/sunxi.h
-
---- a/drivers/clk/sunxi/clk-sunxi.c
-+++ b/drivers/clk/sunxi/clk-sunxi.c
-@@ -507,6 +507,41 @@ CLK_OF_DECLARE(sun7i_a20_gmac, "allwinne
-
-
- /**
-+ * clk_sunxi_mmc_phase_control() - configures MMC clock phase control
-+ */
-+
-+void clk_sunxi_mmc_phase_control(struct clk_hw *hw, u8 sample, u8 output)
-+{
-+ #define to_clk_composite(_hw) container_of(_hw, struct clk_composite, hw)
-+ #define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw)
-+
-+ struct clk_composite *composite = to_clk_composite(hw);
-+ struct clk_hw *rate_hw = composite->rate_hw;
-+ struct clk_factors *factors = to_clk_factors(rate_hw);
-+ unsigned long flags = 0;
-+ u32 reg;
-+
-+ if (factors->lock)
-+ spin_lock_irqsave(factors->lock, flags);
-+
-+ reg = readl(factors->reg);
-+
-+ /* set sample clock phase control */
-+ reg &= ~(0x7 << 20);
-+ reg |= ((sample & 0x7) << 20);
-+
-+ /* set output clock phase control */
-+ reg &= ~(0x7 << 8);
-+ reg |= ((output & 0x7) << 8);
-+
-+ writel(reg, factors->reg);
-+
-+ if (factors->lock)
-+ spin_unlock_irqrestore(factors->lock, flags);
-+}
-+
-+
-+/**
- * sunxi_factors_clk_setup() - Setup function for factor clocks
- */
-
---- /dev/null
-+++ b/include/linux/clk/sunxi.h
-@@ -0,0 +1,22 @@
-+/*
-+ * Copyright 2013 - Hans de Goede <hdegoede@redhat.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#ifndef __LINUX_CLK_SUNXI_H_
-+#define __LINUX_CLK_SUNXI_H_
-+
-+#include <linux/clk.h>
-+
-+void clk_sunxi_mmc_phase_control(struct clk_hw *hw, u8 sample, u8 output);
-+
-+#endif
diff --git a/target/linux/sunxi/patches-3.14/190-ahci-libahci-changes.patch b/target/linux/sunxi/patches-3.14/190-ahci-libahci-changes.patch
deleted file mode 100644
index c4d918d5da..0000000000
--- a/target/linux/sunxi/patches-3.14/190-ahci-libahci-changes.patch
+++ /dev/null
@@ -1,872 +0,0 @@
-From 3b5db9d024f173c30ef4060c31bb8e9fbd194cc1 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Mon, 2 Dec 2013 16:13:32 +0100
-Subject: [PATCH] libahci: Allow drivers to override start_engine
-
-Allwinner A10 and A20 ARM SoCs have an AHCI sata controller which needs a
-special register to be poked before starting the DMA engine.
-
-This register gets reset on an ahci_stop_engine call, so there is no other
-place then ahci_start_engine where this poking can be done.
-
-This commit allows drivers to override ahci_start_engine behavior for use by
-the Allwinner AHCI driver (and potentially other drivers in the future).
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- drivers/ata/ahci.c | 6 ++++--
- drivers/ata/ahci.h | 6 ++++++
- drivers/ata/libahci.c | 26 +++++++++++++++++++-------
- drivers/ata/sata_highbank.c | 3 ++-
- 4 files changed, 31 insertions(+), 10 deletions(-)
-
---- a/drivers/ata/ahci.c
-+++ b/drivers/ata/ahci.c
-@@ -606,6 +606,7 @@ static int ahci_vt8251_hardreset(struct
- unsigned long deadline)
- {
- struct ata_port *ap = link->ap;
-+ struct ahci_host_priv *hpriv = ap->host->private_data;
- bool online;
- int rc;
-
-@@ -616,7 +617,7 @@ static int ahci_vt8251_hardreset(struct
- rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
- deadline, &online, NULL);
-
-- ahci_start_engine(ap);
-+ hpriv->start_engine(ap);
-
- DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
-
-@@ -631,6 +632,7 @@ static int ahci_p5wdh_hardreset(struct a
- {
- struct ata_port *ap = link->ap;
- struct ahci_port_priv *pp = ap->private_data;
-+ struct ahci_host_priv *hpriv = ap->host->private_data;
- u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
- struct ata_taskfile tf;
- bool online;
-@@ -646,7 +648,7 @@ static int ahci_p5wdh_hardreset(struct a
- rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
- deadline, &online, NULL);
-
-- ahci_start_engine(ap);
-+ hpriv->start_engine(ap);
-
- /* The pseudo configuration device on SIMG4726 attached to
- * ASUS P5W-DH Deluxe doesn't send signature FIS after
---- a/drivers/ata/ahci.h
-+++ b/drivers/ata/ahci.h
-@@ -37,6 +37,7 @@
-
- #include <linux/clk.h>
- #include <linux/libata.h>
-+#include <linux/regulator/consumer.h>
-
- /* Enclosure Management Control */
- #define EM_CTRL_MSG_TYPE 0x000f0000
-@@ -51,6 +52,7 @@
-
- enum {
- AHCI_MAX_PORTS = 32,
-+ AHCI_MAX_CLKS = 3,
- AHCI_MAX_SG = 168, /* hardware max is 64K */
- AHCI_DMA_BOUNDARY = 0xffffffff,
- AHCI_MAX_CMDS = 32,
-@@ -322,8 +324,15 @@ struct ahci_host_priv {
- u32 em_loc; /* enclosure management location */
- u32 em_buf_sz; /* EM buffer size in byte */
- u32 em_msg_type; /* EM message type */
-- struct clk *clk; /* Only for platforms supporting clk */
-+ struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
-+ struct regulator *target_pwr; /* Optional */
- void *plat_data; /* Other platform data */
-+ /*
-+ * Optional ahci_start_engine override, if not set this gets set to the
-+ * default ahci_start_engine during ahci_save_initial_config, this can
-+ * be overridden anytime before the host is activated.
-+ */
-+ void (*start_engine)(struct ata_port *ap);
- };
-
- extern int ahci_ignore_sss;
---- a/drivers/ata/libahci.c
-+++ b/drivers/ata/libahci.c
-@@ -394,6 +394,9 @@ static ssize_t ahci_show_em_supported(st
- *
- * If inconsistent, config values are fixed up by this function.
- *
-+ * If it is not set already this function sets hpriv->start_engine to
-+ * ahci_start_engine.
-+ *
- * LOCKING:
- * None.
- */
-@@ -500,6 +503,9 @@ void ahci_save_initial_config(struct dev
- hpriv->cap = cap;
- hpriv->cap2 = cap2;
- hpriv->port_map = port_map;
-+
-+ if (!hpriv->start_engine)
-+ hpriv->start_engine = ahci_start_engine;
- }
- EXPORT_SYMBOL_GPL(ahci_save_initial_config);
-
-@@ -766,7 +772,7 @@ static void ahci_start_port(struct ata_p
-
- /* enable DMA */
- if (!(hpriv->flags & AHCI_HFLAG_DELAY_ENGINE))
-- ahci_start_engine(ap);
-+ hpriv->start_engine(ap);
-
- /* turn on LEDs */
- if (ap->flags & ATA_FLAG_EM) {
-@@ -1234,7 +1240,7 @@ int ahci_kick_engine(struct ata_port *ap
-
- /* restart engine */
- out_restart:
-- ahci_start_engine(ap);
-+ hpriv->start_engine(ap);
- return rc;
- }
- EXPORT_SYMBOL_GPL(ahci_kick_engine);
-@@ -1426,6 +1432,7 @@ static int ahci_hardreset(struct ata_lin
- const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
- struct ata_port *ap = link->ap;
- struct ahci_port_priv *pp = ap->private_data;
-+ struct ahci_host_priv *hpriv = ap->host->private_data;
- u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
- struct ata_taskfile tf;
- bool online;
-@@ -1443,7 +1450,7 @@ static int ahci_hardreset(struct ata_lin
- rc = sata_link_hardreset(link, timing, deadline, &online,
- ahci_check_ready);
-
-- ahci_start_engine(ap);
-+ hpriv->start_engine(ap);
-
- if (online)
- *class = ahci_dev_classify(ap);
-@@ -2007,10 +2014,12 @@ static void ahci_thaw(struct ata_port *a
-
- void ahci_error_handler(struct ata_port *ap)
- {
-+ struct ahci_host_priv *hpriv = ap->host->private_data;
-+
- if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
- /* restart engine */
- ahci_stop_engine(ap);
-- ahci_start_engine(ap);
-+ hpriv->start_engine(ap);
- }
-
- sata_pmp_error_handler(ap);
-@@ -2031,6 +2040,7 @@ static void ahci_post_internal_cmd(struc
-
- static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
- {
-+ struct ahci_host_priv *hpriv = ap->host->private_data;
- void __iomem *port_mmio = ahci_port_base(ap);
- struct ata_device *dev = ap->link.device;
- u32 devslp, dm, dito, mdat, deto;
-@@ -2094,7 +2104,7 @@ static void ahci_set_aggressive_devslp(s
- PORT_DEVSLP_ADSE);
- writel(devslp, port_mmio + PORT_DEVSLP);
-
-- ahci_start_engine(ap);
-+ hpriv->start_engine(ap);
-
- /* enable device sleep feature for the drive */
- err_mask = ata_dev_set_feature(dev,
-@@ -2106,6 +2116,7 @@ static void ahci_set_aggressive_devslp(s
-
- static void ahci_enable_fbs(struct ata_port *ap)
- {
-+ struct ahci_host_priv *hpriv = ap->host->private_data;
- struct ahci_port_priv *pp = ap->private_data;
- void __iomem *port_mmio = ahci_port_base(ap);
- u32 fbs;
-@@ -2134,11 +2145,12 @@ static void ahci_enable_fbs(struct ata_p
- } else
- dev_err(ap->host->dev, "Failed to enable FBS\n");
-
-- ahci_start_engine(ap);
-+ hpriv->start_engine(ap);
- }
-
- static void ahci_disable_fbs(struct ata_port *ap)
- {
-+ struct ahci_host_priv *hpriv = ap->host->private_data;
- struct ahci_port_priv *pp = ap->private_data;
- void __iomem *port_mmio = ahci_port_base(ap);
- u32 fbs;
-@@ -2166,7 +2178,7 @@ static void ahci_disable_fbs(struct ata_
- pp->fbs_enabled = false;
- }
-
-- ahci_start_engine(ap);
-+ hpriv->start_engine(ap);
- }
-
- static void ahci_pmp_attach(struct ata_port *ap)
---- a/drivers/ata/sata_highbank.c
-+++ b/drivers/ata/sata_highbank.c
-@@ -403,6 +403,7 @@ static int ahci_highbank_hardreset(struc
- static const unsigned long timing[] = { 5, 100, 500};
- struct ata_port *ap = link->ap;
- struct ahci_port_priv *pp = ap->private_data;
-+ struct ahci_host_priv *hpriv = ap->host->private_data;
- u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
- struct ata_taskfile tf;
- bool online;
-@@ -431,7 +432,7 @@ static int ahci_highbank_hardreset(struc
- break;
- } while (!online && retry--);
-
-- ahci_start_engine(ap);
-+ hpriv->start_engine(ap);
-
- if (online)
- *class = ahci_dev_classify(ap);
---- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
-+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
-@@ -10,6 +10,8 @@ Required properties:
-
- Optional properties:
- - dma-coherent : Present if dma operations are coherent
-+- clocks : a list of phandle + clock specifier pairs
-+- target-supply : regulator for SATA target power
-
- Example:
- sata@ffe08000 {
---- a/drivers/ata/ahci_platform.c
-+++ b/drivers/ata/ahci_platform.c
-@@ -87,78 +87,252 @@ static struct scsi_host_template ahci_pl
- AHCI_SHT("ahci_platform"),
- };
-
--static int ahci_probe(struct platform_device *pdev)
-+/**
-+ * ahci_platform_enable_clks - Enable platform clocks
-+ * @hpriv: host private area to store config values
-+ *
-+ * This function enables all the clks found in hpriv->clks, starting
-+ * at index 0. If any clk fails to enable it disables all the clks
-+ * already enabled in reverse order, and then returns an error.
-+ *
-+ * LOCKING:
-+ * None.
-+ *
-+ * RETURNS:
-+ * 0 on success otherwise a negative error code
-+ */
-+int ahci_platform_enable_clks(struct ahci_host_priv *hpriv)
- {
-- struct device *dev = &pdev->dev;
-- struct ahci_platform_data *pdata = dev_get_platdata(dev);
-- const struct platform_device_id *id = platform_get_device_id(pdev);
-- struct ata_port_info pi = ahci_port_info[id ? id->driver_data : 0];
-- const struct ata_port_info *ppi[] = { &pi, NULL };
-- struct ahci_host_priv *hpriv;
-- struct ata_host *host;
-- struct resource *mem;
-- int irq;
-- int n_ports;
-- int i;
-- int rc;
-+ int c, rc;
-
-- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-- if (!mem) {
-- dev_err(dev, "no mmio space\n");
-- return -EINVAL;
-+ for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) {
-+ rc = clk_prepare_enable(hpriv->clks[c]);
-+ if (rc)
-+ goto disable_unprepare_clk;
- }
-+ return 0;
-
-- irq = platform_get_irq(pdev, 0);
-- if (irq <= 0) {
-- dev_err(dev, "no irq\n");
-- return -EINVAL;
-- }
-+disable_unprepare_clk:
-+ while (--c >= 0)
-+ clk_disable_unprepare(hpriv->clks[c]);
-+ return rc;
-+}
-+EXPORT_SYMBOL_GPL(ahci_platform_enable_clks);
-
-- if (pdata && pdata->ata_port_info)
-- pi = *pdata->ata_port_info;
-+/**
-+ * ahci_platform_disable_clks - Disable platform clocks
-+ * @hpriv: host private area to store config values
-+ *
-+ * This function disables all the clks found in hpriv->clks, in reverse
-+ * order of ahci_platform_enable_clks (starting at the end of the array).
-+ *
-+ * LOCKING:
-+ * None.
-+ */
-+void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
-+{
-+ int c;
-
-- hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
-- if (!hpriv) {
-- dev_err(dev, "can't alloc ahci_host_priv\n");
-- return -ENOMEM;
-+ for (c = AHCI_MAX_CLKS - 1; c >= 0; c--)
-+ if (hpriv->clks[c])
-+ clk_disable_unprepare(hpriv->clks[c]);
-+}
-+EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
-+
-+/**
-+ * ahci_platform_enable_resources - Enable platform resources
-+ * @hpriv: host private area to store config values
-+ *
-+ * This function enables all ahci_platform managed resources in
-+ * the following order:
-+ * 1) Regulator
-+ * 2) Clocks (through ahci_platform_enable_clks)
-+ *
-+ * If resource enabling fails at any point the previous enabled
-+ * resources are disabled in reverse order.
-+ *
-+ * LOCKING:
-+ * None.
-+ *
-+ * RETURNS:
-+ * 0 on success otherwise a negative error code
-+ */
-+int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
-+{
-+ int rc;
-+
-+ if (hpriv->target_pwr) {
-+ rc = regulator_enable(hpriv->target_pwr);
-+ if (rc)
-+ return rc;
- }
-
-- hpriv->flags |= (unsigned long)pi.private_data;
-+ rc = ahci_platform_enable_clks(hpriv);
-+ if (rc)
-+ goto disable_regulator;
-+
-+ return 0;
-+
-+disable_regulator:
-+ if (hpriv->target_pwr)
-+ regulator_disable(hpriv->target_pwr);
-+ return rc;
-+}
-+EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
-+
-+/**
-+ * ahci_platform_disable_resources - Disable platform resources
-+ * @hpriv: host private area to store config values
-+ *
-+ * This function disables all ahci_platform managed resources in
-+ * the following order:
-+ * 1) Clocks (through ahci_platform_disable_clks)
-+ * 2) Regulator
-+ *
-+ * LOCKING:
-+ * None.
-+ */
-+void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
-+{
-+ ahci_platform_disable_clks(hpriv);
-
-- hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
-+ if (hpriv->target_pwr)
-+ regulator_disable(hpriv->target_pwr);
-+}
-+EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
-+
-+static void ahci_platform_put_resources(struct device *dev, void *res)
-+{
-+ struct ahci_host_priv *hpriv = res;
-+ int c;
-+
-+ for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
-+ clk_put(hpriv->clks[c]);
-+}
-+
-+/**
-+ * ahci_platform_get_resources - Get platform resources
-+ * @pdev: platform device to get resources for
-+ *
-+ * This function allocates an ahci_host_priv struct, and gets the
-+ * following resources, storing a reference to them inside the returned
-+ * struct:
-+ *
-+ * 1) mmio registers (IORESOURCE_MEM 0, mandatory)
-+ * 2) regulator for controlling the targets power (optional)
-+ * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
-+ * or for non devicetree enabled platforms a single clock
-+ *
-+ * LOCKING:
-+ * None.
-+ *
-+ * RETURNS:
-+ * The allocated ahci_host_priv on success, otherwise an ERR_PTR value
-+ */
-+struct ahci_host_priv *ahci_platform_get_resources(
-+ struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct ahci_host_priv *hpriv;
-+ struct clk *clk;
-+ int i, rc = -ENOMEM;
-+
-+ if (!devres_open_group(dev, NULL, GFP_KERNEL))
-+ return ERR_PTR(-ENOMEM);
-+
-+ hpriv = devres_alloc(ahci_platform_put_resources, sizeof(*hpriv),
-+ GFP_KERNEL);
-+ if (!hpriv)
-+ goto err_out;
-+
-+ devres_add(dev, hpriv);
-+
-+ hpriv->mmio = devm_ioremap_resource(dev,
-+ platform_get_resource(pdev, IORESOURCE_MEM, 0));
- if (!hpriv->mmio) {
-- dev_err(dev, "can't map %pR\n", mem);
-- return -ENOMEM;
-+ dev_err(dev, "no mmio space\n");
-+ goto err_out;
- }
-
-- hpriv->clk = clk_get(dev, NULL);
-- if (IS_ERR(hpriv->clk)) {
-- dev_err(dev, "can't get clock\n");
-- } else {
-- rc = clk_prepare_enable(hpriv->clk);
-- if (rc) {
-- dev_err(dev, "clock prepare enable failed");
-- goto free_clk;
-+ hpriv->target_pwr = devm_regulator_get_optional(dev, "target");
-+ if (IS_ERR(hpriv->target_pwr)) {
-+ rc = PTR_ERR(hpriv->target_pwr);
-+ if (rc == -EPROBE_DEFER)
-+ goto err_out;
-+ hpriv->target_pwr = NULL;
-+ }
-+
-+ for (i = 0; i < AHCI_MAX_CLKS; i++) {
-+ /*
-+ * For now we must use clk_get(dev, NULL) for the first clock,
-+ * because some platforms (da850, spear13xx) are not yet
-+ * converted to use devicetree for clocks. For new platforms
-+ * this is equivalent to of_clk_get(dev->of_node, 0).
-+ */
-+ if (i == 0)
-+ clk = clk_get(dev, NULL);
-+ else
-+ clk = of_clk_get(dev->of_node, i);
-+
-+ if (IS_ERR(clk)) {
-+ rc = PTR_ERR(clk);
-+ if (rc == -EPROBE_DEFER)
-+ goto err_out;
-+ break;
- }
-+ hpriv->clks[i] = clk;
- }
-
-- /*
-- * Some platforms might need to prepare for mmio region access,
-- * which could be done in the following init call. So, the mmio
-- * region shouldn't be accessed before init (if provided) has
-- * returned successfully.
-- */
-- if (pdata && pdata->init) {
-- rc = pdata->init(dev, hpriv->mmio);
-- if (rc)
-- goto disable_unprepare_clk;
-- }
-+ devres_remove_group(dev, NULL);
-+ return hpriv;
-+
-+err_out:
-+ devres_release_group(dev, NULL);
-+ return ERR_PTR(rc);
-+}
-+EXPORT_SYMBOL_GPL(ahci_platform_get_resources);
-+
-+/**
-+ * ahci_platform_init_host - Bring up an ahci-platform host
-+ * @pdev: platform device pointer for the host
-+ * @hpriv: ahci-host private data for the host
-+ * @pi_template: template for the ata_port_info to use
-+ * @force_port_map: param passed to ahci_save_initial_config
-+ * @mask_port_map: param passed to ahci_save_initial_config
-+ *
-+ * This function does all the usual steps needed to bring up an
-+ * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
-+ * must be initialized / enabled before calling this.
-+ *
-+ * LOCKING:
-+ * None.
-+ *
-+ * RETURNS:
-+ * 0 on success otherwise a negative error code
-+ */
-+int ahci_platform_init_host(struct platform_device *pdev,
-+ struct ahci_host_priv *hpriv,
-+ const struct ata_port_info *pi_template,
-+ unsigned int force_port_map,
-+ unsigned int mask_port_map)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct ata_port_info pi = *pi_template;
-+ const struct ata_port_info *ppi[] = { &pi, NULL };
-+ struct ata_host *host;
-+ int i, irq, n_ports, rc;
-
-- ahci_save_initial_config(dev, hpriv,
-- pdata ? pdata->force_port_map : 0,
-- pdata ? pdata->mask_port_map : 0);
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq <= 0) {
-+ dev_err(dev, "no irq\n");
-+ return -EINVAL;
-+ }
-
- /* prepare host */
-+ hpriv->flags |= (unsigned long)pi.private_data;
-+
-+ ahci_save_initial_config(dev, hpriv, force_port_map, mask_port_map);
-+
- if (hpriv->cap & HOST_CAP_NCQ)
- pi.flags |= ATA_FLAG_NCQ;
-
-@@ -175,10 +349,8 @@ static int ahci_probe(struct platform_de
- n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
-
- host = ata_host_alloc_pinfo(dev, ppi, n_ports);
-- if (!host) {
-- rc = -ENOMEM;
-- goto pdata_exit;
-- }
-+ if (!host)
-+ return -ENOMEM;
-
- host->private_data = hpriv;
-
-@@ -193,7 +365,8 @@ static int ahci_probe(struct platform_de
- for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap = host->ports[i];
-
-- ata_port_desc(ap, "mmio %pR", mem);
-+ ata_port_desc(ap, "mmio %pR",
-+ platform_get_resource(pdev, IORESOURCE_MEM, 0));
- ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
-
- /* set enclosure management message type */
-@@ -207,13 +380,53 @@ static int ahci_probe(struct platform_de
-
- rc = ahci_reset_controller(host);
- if (rc)
-- goto pdata_exit;
-+ return rc;
-
- ahci_init_controller(host);
- ahci_print_info(host, "platform");
-
-- rc = ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
-- &ahci_platform_sht);
-+ return ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
-+ &ahci_platform_sht);
-+}
-+EXPORT_SYMBOL_GPL(ahci_platform_init_host);
-+
-+static int ahci_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct ahci_platform_data *pdata = dev_get_platdata(dev);
-+ const struct platform_device_id *id = platform_get_device_id(pdev);
-+ const struct ata_port_info *pi_template;
-+ struct ahci_host_priv *hpriv;
-+ int rc;
-+
-+ hpriv = ahci_platform_get_resources(pdev);
-+ if (IS_ERR(hpriv))
-+ return PTR_ERR(hpriv);
-+
-+ rc = ahci_platform_enable_resources(hpriv);
-+ if (rc)
-+ return rc;
-+
-+ /*
-+ * Some platforms might need to prepare for mmio region access,
-+ * which could be done in the following init call. So, the mmio
-+ * region shouldn't be accessed before init (if provided) has
-+ * returned successfully.
-+ */
-+ if (pdata && pdata->init) {
-+ rc = pdata->init(dev, hpriv->mmio);
-+ if (rc)
-+ goto disable_resources;
-+ }
-+
-+ if (pdata && pdata->ata_port_info)
-+ pi_template = pdata->ata_port_info;
-+ else
-+ pi_template = &ahci_port_info[id ? id->driver_data : 0];
-+
-+ rc = ahci_platform_init_host(pdev, hpriv, pi_template,
-+ pdata ? pdata->force_port_map : 0,
-+ pdata ? pdata->mask_port_map : 0);
- if (rc)
- goto pdata_exit;
-
-@@ -221,12 +434,8 @@ static int ahci_probe(struct platform_de
- pdata_exit:
- if (pdata && pdata->exit)
- pdata->exit(dev);
--disable_unprepare_clk:
-- if (!IS_ERR(hpriv->clk))
-- clk_disable_unprepare(hpriv->clk);
--free_clk:
-- if (!IS_ERR(hpriv->clk))
-- clk_put(hpriv->clk);
-+disable_resources:
-+ ahci_platform_disable_resources(hpriv);
- return rc;
- }
-
-@@ -239,21 +448,30 @@ static void ahci_host_stop(struct ata_ho
- if (pdata && pdata->exit)
- pdata->exit(dev);
-
-- if (!IS_ERR(hpriv->clk)) {
-- clk_disable_unprepare(hpriv->clk);
-- clk_put(hpriv->clk);
-- }
-+ ahci_platform_disable_resources(hpriv);
- }
-
- #ifdef CONFIG_PM_SLEEP
--static int ahci_suspend(struct device *dev)
-+/**
-+ * ahci_platform_suspend_host - Suspend an ahci-platform host
-+ * @dev: device pointer for the host
-+ *
-+ * This function does all the usual steps needed to suspend an
-+ * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
-+ * must be disabled after calling this.
-+ *
-+ * LOCKING:
-+ * None.
-+ *
-+ * RETURNS:
-+ * 0 on success otherwise a negative error code
-+ */
-+int ahci_platform_suspend_host(struct device *dev)
- {
-- struct ahci_platform_data *pdata = dev_get_platdata(dev);
- struct ata_host *host = dev_get_drvdata(dev);
- struct ahci_host_priv *hpriv = host->private_data;
- void __iomem *mmio = hpriv->mmio;
- u32 ctl;
-- int rc;
-
- if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
- dev_err(dev, "firmware update required for suspend/resume\n");
-@@ -270,61 +488,122 @@ static int ahci_suspend(struct device *d
- writel(ctl, mmio + HOST_CTL);
- readl(mmio + HOST_CTL); /* flush */
-
-- rc = ata_host_suspend(host, PMSG_SUSPEND);
-+ return ata_host_suspend(host, PMSG_SUSPEND);
-+}
-+EXPORT_SYMBOL_GPL(ahci_platform_suspend_host);
-+
-+/**
-+ * ahci_platform_resume_host - Resume an ahci-platform host
-+ * @dev: device pointer for the host
-+ *
-+ * This function does all the usual steps needed to resume an
-+ * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
-+ * must be initialized / enabled before calling this.
-+ *
-+ * LOCKING:
-+ * None.
-+ *
-+ * RETURNS:
-+ * 0 on success otherwise a negative error code
-+ */
-+int ahci_platform_resume_host(struct device *dev)
-+{
-+ struct ata_host *host = dev_get_drvdata(dev);
-+ int rc;
-+
-+ if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
-+ rc = ahci_reset_controller(host);
-+ if (rc)
-+ return rc;
-+
-+ ahci_init_controller(host);
-+ }
-+
-+ ata_host_resume(host);
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL_GPL(ahci_platform_resume_host);
-+
-+/**
-+ * ahci_platform_suspend - Suspend an ahci-platform device
-+ * @dev: the platform device to suspend
-+ *
-+ * This function suspends the host associated with the device, followed
-+ * by disabling all the resources of the device.
-+ *
-+ * LOCKING:
-+ * None.
-+ *
-+ * RETURNS:
-+ * 0 on success otherwise a negative error code
-+ */
-+int ahci_platform_suspend(struct device *dev)
-+{
-+ struct ahci_platform_data *pdata = dev_get_platdata(dev);
-+ struct ata_host *host = dev_get_drvdata(dev);
-+ struct ahci_host_priv *hpriv = host->private_data;
-+ int rc;
-+
-+ rc = ahci_platform_suspend_host(dev);
- if (rc)
- return rc;
-
- if (pdata && pdata->suspend)
- return pdata->suspend(dev);
-
-- if (!IS_ERR(hpriv->clk))
-- clk_disable_unprepare(hpriv->clk);
-+ ahci_platform_disable_resources(hpriv);
-
- return 0;
- }
-+EXPORT_SYMBOL_GPL(ahci_platform_suspend);
-
--static int ahci_resume(struct device *dev)
-+/**
-+ * ahci_platform_resume - Resume an ahci-platform device
-+ * @dev: the platform device to resume
-+ *
-+ * This function enables all the resources of the device followed by
-+ * resuming the host associated with the device.
-+ *
-+ * LOCKING:
-+ * None.
-+ *
-+ * RETURNS:
-+ * 0 on success otherwise a negative error code
-+ */
-+int ahci_platform_resume(struct device *dev)
- {
- struct ahci_platform_data *pdata = dev_get_platdata(dev);
- struct ata_host *host = dev_get_drvdata(dev);
- struct ahci_host_priv *hpriv = host->private_data;
- int rc;
-
-- if (!IS_ERR(hpriv->clk)) {
-- rc = clk_prepare_enable(hpriv->clk);
-- if (rc) {
-- dev_err(dev, "clock prepare enable failed");
-- return rc;
-- }
-- }
-+ rc = ahci_platform_enable_resources(hpriv);
-+ if (rc)
-+ return rc;
-
- if (pdata && pdata->resume) {
- rc = pdata->resume(dev);
- if (rc)
-- goto disable_unprepare_clk;
-- }
--
-- if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
-- rc = ahci_reset_controller(host);
-- if (rc)
-- goto disable_unprepare_clk;
--
-- ahci_init_controller(host);
-+ goto disable_resources;
- }
-
-- ata_host_resume(host);
-+ rc = ahci_platform_resume_host(dev);
-+ if (rc)
-+ goto disable_resources;
-
- return 0;
-
--disable_unprepare_clk:
-- if (!IS_ERR(hpriv->clk))
-- clk_disable_unprepare(hpriv->clk);
-+disable_resources:
-+ ahci_platform_disable_resources(hpriv);
-
- return rc;
- }
-+EXPORT_SYMBOL_GPL(ahci_platform_resume);
- #endif
-
--static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_suspend, ahci_resume);
-+static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_platform_suspend,
-+ ahci_platform_resume);
-
- static const struct of_device_id ahci_of_match[] = {
- { .compatible = "snps,spear-ahci", },
---- a/include/linux/ahci_platform.h
-+++ b/include/linux/ahci_platform.h
-@@ -19,7 +19,15 @@
-
- struct device;
- struct ata_port_info;
-+struct ahci_host_priv;
-+struct platform_device;
-
-+/*
-+ * Note ahci_platform_data is deprecated, it is only kept around for use
-+ * by the old da850 and spear13xx ahci code.
-+ * New drivers should instead declare their own platform_driver struct, and
-+ * use ahci_platform* functions in their own probe, suspend and resume methods.
-+ */
- struct ahci_platform_data {
- int (*init)(struct device *dev, void __iomem *addr);
- void (*exit)(struct device *dev);
-@@ -30,4 +38,21 @@ struct ahci_platform_data {
- unsigned int mask_port_map;
- };
-
-+int ahci_platform_enable_clks(struct ahci_host_priv *hpriv);
-+void ahci_platform_disable_clks(struct ahci_host_priv *hpriv);
-+int ahci_platform_enable_resources(struct ahci_host_priv *hpriv);
-+void ahci_platform_disable_resources(struct ahci_host_priv *hpriv);
-+struct ahci_host_priv *ahci_platform_get_resources(
-+ struct platform_device *pdev);
-+int ahci_platform_init_host(struct platform_device *pdev,
-+ struct ahci_host_priv *hpriv,
-+ const struct ata_port_info *pi_template,
-+ unsigned int force_port_map,
-+ unsigned int mask_port_map);
-+
-+int ahci_platform_suspend_host(struct device *dev);
-+int ahci_platform_resume_host(struct device *dev);
-+int ahci_platform_suspend(struct device *dev);
-+int ahci_platform_resume(struct device *dev);
-+
- #endif /* _AHCI_PLATFORM_H */
diff --git a/target/linux/sunxi/patches-3.14/191-ahci-add-sunxi-driver.patch b/target/linux/sunxi/patches-3.14/191-ahci-add-sunxi-driver.patch
deleted file mode 100644
index 563b19d366..0000000000
--- a/target/linux/sunxi/patches-3.14/191-ahci-add-sunxi-driver.patch
+++ /dev/null
@@ -1,340 +0,0 @@
-From 49270be12ed66b6aff84292f63c16ed77a62e8a6 Mon Sep 17 00:00:00 2001
-From: Olliver Schinagl <oliver@schinagl.nl>
-Date: Sat, 18 Jan 2014 15:00:45 +0100
-Subject: [PATCH] ARM: sunxi: Add support for Allwinner SUNXi SoCs sata to
- ahci_platform
-
-This patch adds support for the ahci sata controler found on Allwinner A10
-and A20 SoCs to the ahci_platform driver.
-
-Orignally written by Olliver Schinagl using the approach of having a platform
-device which probe method creates a new child platform device which gets
-driven by ahci_platform.c, as done by ahci_imx.c .
-
-Refactored by Hans de Goede to add most of the non sunxi specific functionality
-to ahci_platform.c and use a platform_data pointer from of_device_id for the
-sunxi specific bits.
-
-Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- .../devicetree/bindings/ata/ahci-platform.txt | 15 +-
- drivers/ata/Kconfig | 9 +
- drivers/ata/Makefile | 1 +
- drivers/ata/ahci_sunxi.c | 249 +++++++++++++++++++++
- 4 files changed, 271 insertions(+), 3 deletions(-)
- create mode 100644 drivers/ata/ahci_sunxi.c
-
---- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
-+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
-@@ -4,7 +4,9 @@ SATA nodes are defined to describe on-ch
- Each SATA controller should have its own node.
-
- Required properties:
--- compatible : compatible list, contains "snps,spear-ahci"
-+- compatible : compatible list, one of "snps,spear-ahci",
-+ "snps,exynos5440-ahci", "ibm,476gtr-ahci", or
-+ "allwinner,sun4i-a10-ahci"
- - interrupts : <interrupt mapping for SATA IRQ>
- - reg : <registers mapping>
-
-@@ -13,10 +15,17 @@ Optional properties:
- - clocks : a list of phandle + clock specifier pairs
- - target-supply : regulator for SATA target power
-
--Example:
-+Examples:
- sata@ffe08000 {
- compatible = "snps,spear-ahci";
- reg = <0xffe08000 0x1000>;
- interrupts = <115>;
--
- };
-+
-+ ahci: sata@01c18000 {
-+ compatible = "allwinner,sun4i-a10-ahci";
-+ reg = <0x01c18000 0x1000>;
-+ interrupts = <56>;
-+ clocks = <&pll6 0>, <&ahb_gates 25>;
-+ target-supply = <&reg_ahci_5v>;
-+ };
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -106,6 +106,15 @@ config AHCI_IMX
-
- If unsure, say N.
-
-+config AHCI_SUNXI
-+ tristate "Allwinner sunxi AHCI SATA support"
-+ depends on ARCH_SUNXI && SATA_AHCI_PLATFORM
-+ help
-+ This option enables support for the Allwinner sunxi SoC's
-+ onboard AHCI SATA.
-+
-+ If unsure, say N.
-+
- config SATA_FSL
- tristate "Freescale 3.0Gbps SATA support"
- depends on FSL_SOC
---- a/drivers/ata/Makefile
-+++ b/drivers/ata/Makefile
-@@ -11,6 +11,7 @@ obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
- obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o
- obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o
- obj-$(CONFIG_AHCI_IMX) += ahci_imx.o
-+obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o
-
- # SFF w/ custom DMA
- obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
---- /dev/null
-+++ b/drivers/ata/ahci_sunxi.c
-@@ -0,0 +1,249 @@
-+/*
-+ * Allwinner sunxi AHCI SATA platform driver
-+ * Copyright 2013 Olliver Schinagl <oliver@schinagl.nl>
-+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
-+ *
-+ * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
-+ * Based on code from Allwinner Technology Co., Ltd. <www.allwinnertech.com>,
-+ * Daniel Wang <danielwang@allwinnertech.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms and conditions of the GNU General Public License,
-+ * version 2, as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-+ * more details.
-+ */
-+
-+#include <linux/ahci_platform.h>
-+#include <linux/clk.h>
-+#include <linux/errno.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include <linux/regulator/consumer.h>
-+#include "ahci.h"
-+
-+#define AHCI_BISTAFR 0x00a0
-+#define AHCI_BISTCR 0x00a4
-+#define AHCI_BISTFCTR 0x00a8
-+#define AHCI_BISTSR 0x00ac
-+#define AHCI_BISTDECR 0x00b0
-+#define AHCI_DIAGNR0 0x00b4
-+#define AHCI_DIAGNR1 0x00b8
-+#define AHCI_OOBR 0x00bc
-+#define AHCI_PHYCS0R 0x00c0
-+#define AHCI_PHYCS1R 0x00c4
-+#define AHCI_PHYCS2R 0x00c8
-+#define AHCI_TIMER1MS 0x00e0
-+#define AHCI_GPARAM1R 0x00e8
-+#define AHCI_GPARAM2R 0x00ec
-+#define AHCI_PPARAMR 0x00f0
-+#define AHCI_TESTR 0x00f4
-+#define AHCI_VERSIONR 0x00f8
-+#define AHCI_IDR 0x00fc
-+#define AHCI_RWCR 0x00fc
-+#define AHCI_P0DMACR 0x0170
-+#define AHCI_P0PHYCR 0x0178
-+#define AHCI_P0PHYSR 0x017c
-+
-+static void sunxi_clrbits(void __iomem *reg, u32 clr_val)
-+{
-+ u32 reg_val;
-+
-+ reg_val = readl(reg);
-+ reg_val &= ~(clr_val);
-+ writel(reg_val, reg);
-+}
-+
-+static void sunxi_setbits(void __iomem *reg, u32 set_val)
-+{
-+ u32 reg_val;
-+
-+ reg_val = readl(reg);
-+ reg_val |= set_val;
-+ writel(reg_val, reg);
-+}
-+
-+static void sunxi_clrsetbits(void __iomem *reg, u32 clr_val, u32 set_val)
-+{
-+ u32 reg_val;
-+
-+ reg_val = readl(reg);
-+ reg_val &= ~(clr_val);
-+ reg_val |= set_val;
-+ writel(reg_val, reg);
-+}
-+
-+static u32 sunxi_getbits(void __iomem *reg, u8 mask, u8 shift)
-+{
-+ return (readl(reg) >> shift) & mask;
-+}
-+
-+static int ahci_sunxi_phy_init(struct device *dev, void __iomem *reg_base)
-+{
-+ u32 reg_val;
-+ int timeout;
-+
-+ /* This magic is from the original code */
-+ writel(0, reg_base + AHCI_RWCR);
-+ mdelay(5);
-+
-+ sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(19));
-+ sunxi_clrsetbits(reg_base + AHCI_PHYCS0R,
-+ (0x7 << 24),
-+ (0x5 << 24) | BIT(23) | BIT(18));
-+ sunxi_clrsetbits(reg_base + AHCI_PHYCS1R,
-+ (0x3 << 16) | (0x1f << 8) | (0x3 << 6),
-+ (0x2 << 16) | (0x6 << 8) | (0x2 << 6));
-+ sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(28) | BIT(15));
-+ sunxi_clrbits(reg_base + AHCI_PHYCS1R, BIT(19));
-+ sunxi_clrsetbits(reg_base + AHCI_PHYCS0R,
-+ (0x7 << 20), (0x3 << 20));
-+ sunxi_clrsetbits(reg_base + AHCI_PHYCS2R,
-+ (0x1f << 5), (0x19 << 5));
-+ mdelay(5);
-+
-+ sunxi_setbits(reg_base + AHCI_PHYCS0R, (0x1 << 19));
-+
-+ timeout = 250; /* Power up takes aprox 50 us */
-+ do {
-+ reg_val = sunxi_getbits(reg_base + AHCI_PHYCS0R, 0x7, 28);
-+ if (reg_val == 0x02)
-+ break;
-+
-+ if (--timeout == 0) {
-+ dev_err(dev, "PHY power up failed.\n");
-+ return -EIO;
-+ }
-+ udelay(1);
-+ } while (1);
-+
-+ sunxi_setbits(reg_base + AHCI_PHYCS2R, (0x1 << 24));
-+
-+ timeout = 100; /* Calibration takes aprox 10 us */
-+ do {
-+ reg_val = sunxi_getbits(reg_base + AHCI_PHYCS2R, 0x1, 24);
-+ if (reg_val == 0x00)
-+ break;
-+
-+ if (--timeout == 0) {
-+ dev_err(dev, "PHY calibration failed.\n");
-+ return -EIO;
-+ }
-+ udelay(1);
-+ } while (1);
-+
-+ mdelay(15);
-+
-+ writel(0x7, reg_base + AHCI_RWCR);
-+
-+ return 0;
-+}
-+
-+static void ahci_sunxi_start_engine(struct ata_port *ap)
-+{
-+ void __iomem *port_mmio = ahci_port_base(ap);
-+ struct ahci_host_priv *hpriv = ap->host->private_data;
-+
-+ /* Setup DMA before DMA start */
-+ sunxi_clrsetbits(hpriv->mmio + AHCI_P0DMACR, 0x0000ff00, 0x00004400);
-+
-+ /* Start DMA */
-+ sunxi_setbits(port_mmio + PORT_CMD, PORT_CMD_START);
-+}
-+
-+static const struct ata_port_info ahci_sunxi_port_info = {
-+ AHCI_HFLAGS(AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI |
-+ AHCI_HFLAG_NO_PMP | AHCI_HFLAG_YES_NCQ),
-+ .flags = AHCI_FLAG_COMMON | ATA_FLAG_NCQ,
-+ .pio_mask = ATA_PIO4,
-+ .udma_mask = ATA_UDMA6,
-+ .port_ops = &ahci_platform_ops,
-+};
-+
-+static int ahci_sunxi_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct ahci_host_priv *hpriv;
-+ int rc;
-+
-+ hpriv = ahci_platform_get_resources(pdev);
-+ if (IS_ERR(hpriv))
-+ return PTR_ERR(hpriv);
-+
-+ hpriv->start_engine = ahci_sunxi_start_engine;
-+
-+ rc = ahci_platform_enable_resources(hpriv);
-+ if (rc)
-+ return rc;
-+
-+ rc = ahci_sunxi_phy_init(dev, hpriv->mmio);
-+ if (rc)
-+ goto disable_resources;
-+
-+ rc = ahci_platform_init_host(pdev, hpriv, &ahci_sunxi_port_info, 0, 0);
-+ if (rc)
-+ goto disable_resources;
-+
-+ return 0;
-+
-+disable_resources:
-+ ahci_platform_disable_resources(hpriv);
-+ return rc;
-+}
-+
-+#ifdef CONFIG_PM_SLEEP
-+int ahci_sunxi_resume(struct device *dev)
-+{
-+ struct ata_host *host = dev_get_drvdata(dev);
-+ struct ahci_host_priv *hpriv = host->private_data;
-+ int rc;
-+
-+ rc = ahci_platform_enable_resources(hpriv);
-+ if (rc)
-+ return rc;
-+
-+ rc = ahci_sunxi_phy_init(dev, hpriv->mmio);
-+ if (rc)
-+ goto disable_resources;
-+
-+ rc = ahci_platform_resume_host(dev);
-+ if (rc)
-+ goto disable_resources;
-+
-+ return 0;
-+
-+disable_resources:
-+ ahci_platform_disable_resources(hpriv);
-+ return rc;
-+}
-+#endif
-+
-+static SIMPLE_DEV_PM_OPS(ahci_sunxi_pm_ops, ahci_platform_suspend,
-+ ahci_sunxi_resume);
-+
-+static const struct of_device_id ahci_sunxi_of_match[] = {
-+ { .compatible = "allwinner,sun4i-a10-ahci", },
-+ { },
-+};
-+MODULE_DEVICE_TABLE(of, ahci_sunxi_of_match);
-+
-+static struct platform_driver ahci_sunxi_driver = {
-+ .probe = ahci_sunxi_probe,
-+ .remove = ata_platform_remove_one,
-+ .driver = {
-+ .name = "ahci-sunxi",
-+ .owner = THIS_MODULE,
-+ .of_match_table = ahci_sunxi_of_match,
-+ .pm = &ahci_sunxi_pm_ops,
-+ },
-+};
-+module_platform_driver(ahci_sunxi_driver);
-+
-+MODULE_DESCRIPTION("Allwinner sunxi AHCI SATA driver");
-+MODULE_AUTHOR("Olliver Schinagl <oliver@schinagl.nl>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/sunxi/patches-3.14/192-ahci-platform-changes.patch b/target/linux/sunxi/patches-3.14/192-ahci-platform-changes.patch
deleted file mode 100644
index a5f4fc50a0..0000000000
--- a/target/linux/sunxi/patches-3.14/192-ahci-platform-changes.patch
+++ /dev/null
@@ -1,202 +0,0 @@
-From a52ae09871d171d6771b4bef2d4c56dd435e740f Mon Sep 17 00:00:00 2001
-From: Roger Quadros <rogerq@ti.com>
-Date: Mon, 20 Jan 2014 16:32:33 +0200
-Subject: [PATCH] ata: ahci_platform: Add DT compatible for Synopsis DWC AHCI
- controller
-
-Add compatible string "snps,dwc-ahci", which should be used
-for Synopsis Designware SATA cores. e.g. on TI OMAP5 and DRA7 platforms.
-
-Signed-off-by: Roger Quadros <rogerq@ti.com>
-Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- drivers/ata/ahci_platform.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/ata/ahci_platform.c
-+++ b/drivers/ata/ahci_platform.c
-@@ -23,6 +23,8 @@
- #include <linux/platform_device.h>
- #include <linux/libata.h>
- #include <linux/ahci_platform.h>
-+#include <linux/phy/phy.h>
-+#include <linux/pm_runtime.h>
- #include "ahci.h"
-
- static void ahci_host_stop(struct ata_host *host);
-@@ -147,6 +149,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_disable_
- * the following order:
- * 1) Regulator
- * 2) Clocks (through ahci_platform_enable_clks)
-+ * 3) Phy
- *
- * If resource enabling fails at any point the previous enabled
- * resources are disabled in reverse order.
-@@ -171,8 +174,23 @@ int ahci_platform_enable_resources(struc
- if (rc)
- goto disable_regulator;
-
-+ if (hpriv->phy) {
-+ rc = phy_init(hpriv->phy);
-+ if (rc)
-+ goto disable_clks;
-+
-+ rc = phy_power_on(hpriv->phy);
-+ if (rc) {
-+ phy_exit(hpriv->phy);
-+ goto disable_clks;
-+ }
-+ }
-+
- return 0;
-
-+disable_clks:
-+ ahci_platform_disable_clks(hpriv);
-+
- disable_regulator:
- if (hpriv->target_pwr)
- regulator_disable(hpriv->target_pwr);
-@@ -186,14 +204,20 @@ EXPORT_SYMBOL_GPL(ahci_platform_enable_r
- *
- * This function disables all ahci_platform managed resources in
- * the following order:
-- * 1) Clocks (through ahci_platform_disable_clks)
-- * 2) Regulator
-+ * 1) Phy
-+ * 2) Clocks (through ahci_platform_disable_clks)
-+ * 3) Regulator
- *
- * LOCKING:
- * None.
- */
- void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
- {
-+ if (hpriv->phy) {
-+ phy_power_off(hpriv->phy);
-+ phy_exit(hpriv->phy);
-+ }
-+
- ahci_platform_disable_clks(hpriv);
-
- if (hpriv->target_pwr)
-@@ -206,6 +230,11 @@ static void ahci_platform_put_resources(
- struct ahci_host_priv *hpriv = res;
- int c;
-
-+ if (hpriv->got_runtime_pm) {
-+ pm_runtime_put_sync(dev);
-+ pm_runtime_disable(dev);
-+ }
-+
- for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
- clk_put(hpriv->clks[c]);
- }
-@@ -222,6 +251,7 @@ static void ahci_platform_put_resources(
- * 2) regulator for controlling the targets power (optional)
- * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
- * or for non devicetree enabled platforms a single clock
-+ * 4) phy (optional)
- *
- * LOCKING:
- * None.
-@@ -283,6 +313,29 @@ struct ahci_host_priv *ahci_platform_get
- hpriv->clks[i] = clk;
- }
-
-+ hpriv->phy = devm_phy_get(dev, "sata-phy");
-+ if (IS_ERR(hpriv->phy)) {
-+ rc = PTR_ERR(hpriv->phy);
-+ switch (rc) {
-+ case -ENODEV:
-+ case -ENOSYS:
-+ /* continue normally */
-+ hpriv->phy = NULL;
-+ break;
-+
-+ case -EPROBE_DEFER:
-+ goto err_out;
-+
-+ default:
-+ dev_err(dev, "couldn't get sata-phy\n");
-+ goto err_out;
-+ }
-+ }
-+
-+ pm_runtime_enable(dev);
-+ pm_runtime_get_sync(dev);
-+ hpriv->got_runtime_pm = true;
-+
- devres_remove_group(dev, NULL);
- return hpriv;
-
-@@ -592,6 +645,11 @@ int ahci_platform_resume(struct device *
- if (rc)
- goto disable_resources;
-
-+ /* We resumed so update PM runtime state */
-+ pm_runtime_disable(dev);
-+ pm_runtime_set_active(dev);
-+ pm_runtime_enable(dev);
-+
- return 0;
-
- disable_resources:
-@@ -609,6 +667,7 @@ static const struct of_device_id ahci_of
- { .compatible = "snps,spear-ahci", },
- { .compatible = "snps,exynos5440-ahci", },
- { .compatible = "ibm,476gtr-ahci", },
-+ { .compatible = "snps,dwc-ahci", },
- {},
- };
- MODULE_DEVICE_TABLE(of, ahci_of_match);
---- a/drivers/ata/ahci.h
-+++ b/drivers/ata/ahci.h
-@@ -37,6 +37,7 @@
-
- #include <linux/clk.h>
- #include <linux/libata.h>
-+#include <linux/phy/phy.h>
- #include <linux/regulator/consumer.h>
-
- /* Enclosure Management Control */
-@@ -324,8 +325,10 @@ struct ahci_host_priv {
- u32 em_loc; /* enclosure management location */
- u32 em_buf_sz; /* EM buffer size in byte */
- u32 em_msg_type; /* EM message type */
-+ bool got_runtime_pm; /* Did we do pm_runtime_get? */
- struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
- struct regulator *target_pwr; /* Optional */
-+ struct phy *phy; /* If platform uses phy */
- void *plat_data; /* Other platform data */
- /*
- * Optional ahci_start_engine override, if not set this gets set to the
---- a/drivers/ata/ahci_sunxi.c
-+++ b/drivers/ata/ahci_sunxi.c
-@@ -90,7 +90,7 @@ static int ahci_sunxi_phy_init(struct de
-
- /* This magic is from the original code */
- writel(0, reg_base + AHCI_RWCR);
-- mdelay(5);
-+ msleep(5);
-
- sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(19));
- sunxi_clrsetbits(reg_base + AHCI_PHYCS0R,
-@@ -105,7 +105,7 @@ static int ahci_sunxi_phy_init(struct de
- (0x7 << 20), (0x3 << 20));
- sunxi_clrsetbits(reg_base + AHCI_PHYCS2R,
- (0x1f << 5), (0x19 << 5));
-- mdelay(5);
-+ msleep(5);
-
- sunxi_setbits(reg_base + AHCI_PHYCS0R, (0x1 << 19));
-
-@@ -137,7 +137,7 @@ static int ahci_sunxi_phy_init(struct de
- udelay(1);
- } while (1);
-
-- mdelay(15);
-+ msleep(15);
-
- writel(0x7, reg_base + AHCI_RWCR);
-
diff --git a/target/linux/sunxi/patches-3.14/195-1-ohci-plat-changes.patch b/target/linux/sunxi/patches-3.14/195-1-ohci-plat-changes.patch
deleted file mode 100644
index fb4c87ea9e..0000000000
--- a/target/linux/sunxi/patches-3.14/195-1-ohci-plat-changes.patch
+++ /dev/null
@@ -1,344 +0,0 @@
-From 49ff47db168655cac5213cf5dd1844b08fb9823c Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Sun, 5 Jan 2014 14:42:39 +0100
-Subject: [PATCH] ohci-platform: Add support for devicetree instantiation
-
-Add support for ohci-platform instantiation from devicetree, including
-optionally getting clks and a phy from devicetree, and enabling / disabling
-those on power_on / off.
-
-This should allow using ohci-platform from devicetree in various cases.
-Specifically after this commit it can be used for the ohci controller found
-on Allwinner sunxi SoCs.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Acked-by: Alan Stern <stern@rowland.harvard.edu>
----
- Documentation/devicetree/bindings/usb/usb-ohci.txt | 22 +++
- drivers/usb/host/ohci-platform.c | 162 ++++++++++++++++++---
- 2 files changed, 162 insertions(+), 22 deletions(-)
- create mode 100644 Documentation/devicetree/bindings/usb/usb-ohci.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
-@@ -0,0 +1,25 @@
-+USB OHCI controllers
-+
-+Required properties:
-+- compatible : "generic-ohci"
-+- reg : ohci controller register range (address and length)
-+- interrupts : ohci controller interrupt
-+
-+Optional properties:
-+- big-endian-regs : boolean, set this for hcds with big-endian registers
-+- big-endian-desc : boolean, set this for hcds with big-endian descriptors
-+- big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
-+- clocks : a list of phandle + clock specifier pairs
-+- phys : phandle + phy specifier pair
-+- phy-names : "usb"
-+
-+Example:
-+
-+ ohci0: usb@01c14400 {
-+ compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
-+ reg = <0x01c14400 0x100>;
-+ interrupts = <64>;
-+ clocks = <&usb_clk 6>, <&ahb_gates 2>;
-+ phys = <&usbphy 1>;
-+ phy-names = "usb";
-+ };
---- a/drivers/usb/host/ohci-platform.c
-+++ b/drivers/usb/host/ohci-platform.c
-@@ -3,6 +3,7 @@
- *
- * Copyright 2007 Michael Buesch <m@bues.ch>
- * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de>
-+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
- *
- * Derived from the OCHI-SSB driver
- * Derived from the OHCI-PCI driver
-@@ -14,11 +15,14 @@
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
-+#include <linux/clk.h>
-+#include <linux/dma-mapping.h>
- #include <linux/hrtimer.h>
- #include <linux/io.h>
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/err.h>
-+#include <linux/phy/phy.h>
- #include <linux/platform_device.h>
- #include <linux/usb/ohci_pdriver.h>
- #include <linux/usb.h>
-@@ -27,6 +31,13 @@
- #include "ohci.h"
-
- #define DRIVER_DESC "OHCI generic platform driver"
-+#define OHCI_MAX_CLKS 3
-+#define hcd_to_ohci_priv(h) ((struct ohci_platform_priv *)hcd_to_ohci(h)->priv)
-+
-+struct ohci_platform_priv {
-+ struct clk *clks[OHCI_MAX_CLKS];
-+ struct phy *phy;
-+};
-
- static const char hcd_name[] = "ohci-platform";
-
-@@ -48,11 +59,67 @@ static int ohci_platform_reset(struct us
- return ohci_setup(hcd);
- }
-
-+static int ohci_platform_power_on(struct platform_device *dev)
-+{
-+ struct usb_hcd *hcd = platform_get_drvdata(dev);
-+ struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
-+ int clk, ret;
-+
-+ for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++) {
-+ ret = clk_prepare_enable(priv->clks[clk]);
-+ if (ret)
-+ goto err_disable_clks;
-+ }
-+
-+ if (priv->phy) {
-+ ret = phy_init(priv->phy);
-+ if (ret)
-+ goto err_disable_clks;
-+
-+ ret = phy_power_on(priv->phy);
-+ if (ret)
-+ goto err_exit_phy;
-+ }
-+
-+ return 0;
-+
-+err_exit_phy:
-+ phy_exit(priv->phy);
-+err_disable_clks:
-+ while (--clk >= 0)
-+ clk_disable_unprepare(priv->clks[clk]);
-+
-+ return ret;
-+}
-+
-+static void ohci_platform_power_off(struct platform_device *dev)
-+{
-+ struct usb_hcd *hcd = platform_get_drvdata(dev);
-+ struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
-+ int clk;
-+
-+ if (priv->phy) {
-+ phy_power_off(priv->phy);
-+ phy_exit(priv->phy);
-+ }
-+
-+ for (clk = OHCI_MAX_CLKS - 1; clk >= 0; clk--)
-+ if (priv->clks[clk])
-+ clk_disable_unprepare(priv->clks[clk]);
-+}
-+
- static struct hc_driver __read_mostly ohci_platform_hc_driver;
-
- static const struct ohci_driver_overrides platform_overrides __initconst = {
-- .product_desc = "Generic Platform OHCI controller",
-- .reset = ohci_platform_reset,
-+ .product_desc = "Generic Platform OHCI controller",
-+ .reset = ohci_platform_reset,
-+ .extra_priv_size = sizeof(struct ohci_platform_priv),
-+};
-+
-+static struct usb_ohci_pdata ohci_platform_defaults = {
-+ .power_on = ohci_platform_power_on,
-+ .power_suspend = ohci_platform_power_off,
-+ .power_off = ohci_platform_power_off,
- };
-
- static int ohci_platform_probe(struct platform_device *dev)
-@@ -60,17 +127,24 @@ static int ohci_platform_probe(struct pl
- struct usb_hcd *hcd;
- struct resource *res_mem;
- struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
-- int irq;
-- int err = -ENOMEM;
--
-- if (!pdata) {
-- WARN_ON(1);
-- return -ENODEV;
-- }
-+ struct ohci_platform_priv *priv;
-+ struct ohci_hcd *ohci;
-+ int err, irq, clk = 0;
-
- if (usb_disabled())
- return -ENODEV;
-
-+ /*
-+ * Use reasonable defaults so platforms don't have to provide these
-+ * with DT probing on ARM.
-+ */
-+ if (!pdata)
-+ pdata = &ohci_platform_defaults;
-+
-+ err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
-+ if (err)
-+ return err;
-+
- irq = platform_get_irq(dev, 0);
- if (irq < 0) {
- dev_err(&dev->dev, "no irq provided");
-@@ -83,17 +157,66 @@ static int ohci_platform_probe(struct pl
- return -ENXIO;
- }
-
-+ hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev,
-+ dev_name(&dev->dev));
-+ if (!hcd)
-+ return -ENOMEM;
-+
-+ platform_set_drvdata(dev, hcd);
-+ dev->dev.platform_data = pdata;
-+ priv = hcd_to_ohci_priv(hcd);
-+ ohci = hcd_to_ohci(hcd);
-+
-+ if (pdata == &ohci_platform_defaults && dev->dev.of_node) {
-+ if (of_property_read_bool(dev->dev.of_node, "big-endian-regs"))
-+ ohci->flags |= OHCI_QUIRK_BE_MMIO;
-+
-+ if (of_property_read_bool(dev->dev.of_node, "big-endian-desc"))
-+ ohci->flags |= OHCI_QUIRK_BE_DESC;
-+
-+ if (of_property_read_bool(dev->dev.of_node, "big-endian"))
-+ ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC;
-+
-+#ifndef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
-+ if (ohci->flags & OHCI_QUIRK_BE_MMIO) {
-+ dev_err(&dev->dev,
-+ "Error big-endian-regs not compiled in\n");
-+ err = -EINVAL;
-+ goto err_put_hcd;
-+ }
-+#endif
-+#ifndef CONFIG_USB_OHCI_BIG_ENDIAN_DESC
-+ if (ohci->flags & OHCI_QUIRK_BE_DESC) {
-+ dev_err(&dev->dev,
-+ "Error big-endian-desc not compiled in\n");
-+ err = -EINVAL;
-+ goto err_put_hcd;
-+ }
-+#endif
-+ priv->phy = devm_phy_get(&dev->dev, "usb");
-+ if (IS_ERR(priv->phy)) {
-+ err = PTR_ERR(priv->phy);
-+ if (err == -EPROBE_DEFER)
-+ goto err_put_hcd;
-+ priv->phy = NULL;
-+ }
-+
-+ for (clk = 0; clk < OHCI_MAX_CLKS; clk++) {
-+ priv->clks[clk] = of_clk_get(dev->dev.of_node, clk);
-+ if (IS_ERR(priv->clks[clk])) {
-+ err = PTR_ERR(priv->clks[clk]);
-+ if (err == -EPROBE_DEFER)
-+ goto err_put_clks;
-+ priv->clks[clk] = NULL;
-+ break;
-+ }
-+ }
-+ }
-+
- if (pdata->power_on) {
- err = pdata->power_on(dev);
- if (err < 0)
-- return err;
-- }
--
-- hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev,
-- dev_name(&dev->dev));
-- if (!hcd) {
-- err = -ENOMEM;
-- goto err_power;
-+ goto err_put_clks;
- }
-
- hcd->rsrc_start = res_mem->start;
-@@ -102,11 +225,11 @@ static int ohci_platform_probe(struct pl
- hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
- if (IS_ERR(hcd->regs)) {
- err = PTR_ERR(hcd->regs);
-- goto err_put_hcd;
-+ goto err_power;
- }
- err = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (err)
-- goto err_put_hcd;
-+ goto err_power;
-
- device_wakeup_enable(hcd->self.controller);
-
-@@ -114,11 +237,17 @@ static int ohci_platform_probe(struct pl
-
- return err;
-
--err_put_hcd:
-- usb_put_hcd(hcd);
- err_power:
- if (pdata->power_off)
- pdata->power_off(dev);
-+err_put_clks:
-+ while (--clk >= 0)
-+ clk_put(priv->clks[clk]);
-+err_put_hcd:
-+ if (pdata == &ohci_platform_defaults)
-+ dev->dev.platform_data = NULL;
-+
-+ usb_put_hcd(hcd);
-
- return err;
- }
-@@ -127,13 +256,22 @@ static int ohci_platform_remove(struct p
- {
- struct usb_hcd *hcd = platform_get_drvdata(dev);
- struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
-+ struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
-+ int clk;
-
- usb_remove_hcd(hcd);
-- usb_put_hcd(hcd);
-
- if (pdata->power_off)
- pdata->power_off(dev);
-
-+ for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++)
-+ clk_put(priv->clks[clk]);
-+
-+ usb_put_hcd(hcd);
-+
-+ if (pdata == &ohci_platform_defaults)
-+ dev->dev.platform_data = NULL;
-+
- return 0;
- }
-
-@@ -180,6 +318,12 @@ static int ohci_platform_resume(struct d
- #define ohci_platform_resume NULL
- #endif /* CONFIG_PM */
-
-+static const struct of_device_id ohci_platform_ids[] = {
-+ { .compatible = "generic-ohci", },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(of, ohci_platform_ids);
-+
- static const struct platform_device_id ohci_platform_table[] = {
- { "ohci-platform", 0 },
- { }
-@@ -200,6 +344,7 @@ static struct platform_driver ohci_platf
- .owner = THIS_MODULE,
- .name = "ohci-platform",
- .pm = &ohci_platform_pm_ops,
-+ .of_match_table = ohci_platform_ids,
- }
- };
-
diff --git a/target/linux/sunxi/patches-3.14/195-2-ehci-plat-changes.patch b/target/linux/sunxi/patches-3.14/195-2-ehci-plat-changes.patch
deleted file mode 100644
index 425993c7bb..0000000000
--- a/target/linux/sunxi/patches-3.14/195-2-ehci-plat-changes.patch
+++ /dev/null
@@ -1,414 +0,0 @@
-From 738b350437abfca820dae226549ecf4fb100fa30 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Sun, 5 Jan 2014 00:04:02 +0100
-Subject: [PATCH] ehci-platform: Add support for clks and phy passed through
- devicetree
-
-Currently ehci-platform is only used in combination with devicetree when used
-with some Via socs. By extending it to (optionally) get clks and a phy from
-devicetree, and enabling / disabling those on power_on / off, it can be used
-more generically. Specifically after this commit it can be used for the
-ehci controller on Allwinner sunxi SoCs.
-
-Since ehci-platform is intended to handle any generic enough non pci ehci
-device, add a "usb-ehci" compatibility string.
-
-There already is a usb-ehci device-tree bindings document, update this
-with clks and phy bindings info.
-
-Although actually quite generic so far the via,vt8500 compatibilty string
-had its own bindings document. Somehow we even ended up with 2 of them. Since
-these provide no extra information over the generic usb-ehci documentation,
-this patch removes them.
-
-The ehci-ppc-of.c driver also claims the usb-ehci compatibility string,
-even though it mostly is ibm,usb-ehci-440epx specific. ehci-platform.c is
-not needed on ppc platforms, so add a !PPC_OF dependency to it to avoid
-2 drivers claiming the same compatibility string getting build on ppc.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Acked-by: Alan Stern <stern@rowland.harvard.edu>
----
- Documentation/devicetree/bindings/usb/usb-ehci.txt | 25 +++-
- .../devicetree/bindings/usb/via,vt8500-ehci.txt | 15 ---
- .../devicetree/bindings/usb/vt8500-ehci.txt | 12 --
- drivers/usb/host/Kconfig | 1 +
- drivers/usb/host/ehci-platform.c | 147 +++++++++++++++++----
- 5 files changed, 142 insertions(+), 58 deletions(-)
- delete mode 100644 Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt
- delete mode 100644 Documentation/devicetree/bindings/usb/vt8500-ehci.txt
-
---- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
-+++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
-@@ -1,19 +1,20 @@
- USB EHCI controllers
-
- Required properties:
-- - compatible : should be "usb-ehci".
-+ - compatible : should be "generic-ehci".
- - reg : should contain at least address and length of the standard EHCI
- register set for the device. Optional platform-dependent registers
- (debug-port or other) can be also specified here, but only after
- definition of standard EHCI registers.
- - interrupts : one EHCI interrupt should be described here.
--If device registers are implemented in big endian mode, the device
--node should have "big-endian-regs" property.
--If controller implementation operates with big endian descriptors,
--"big-endian-desc" property should be specified.
--If both big endian registers and descriptors are used by the controller
--implementation, "big-endian" property can be specified instead of having
--both "big-endian-regs" and "big-endian-desc".
-+
-+Optional properties:
-+ - big-endian-regs : boolean, set this for hcds with big-endian registers
-+ - big-endian-desc : boolean, set this for hcds with big-endian descriptors
-+ - big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
-+ - clocks : a list of phandle + clock specifier pairs
-+ - phys : phandle + phy specifier pair
-+ - phy-names : "usb"
-
- Example (Sequoia 440EPx):
- ehci@e0000300 {
-@@ -23,3 +24,13 @@ Example (Sequoia 440EPx):
- reg = <0 e0000300 90 0 e0000390 70>;
- big-endian;
- };
-+
-+Example (Allwinner sun4i A10 SoC):
-+ ehci0: usb@01c14000 {
-+ compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
-+ reg = <0x01c14000 0x100>;
-+ interrupts = <39>;
-+ clocks = <&ahb_gates 1>;
-+ phys = <&usbphy 1>;
-+ phy-names = "usb";
-+ };
---- a/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt
-+++ /dev/null
-@@ -1,15 +0,0 @@
--VIA/Wondermedia VT8500 EHCI Controller
-------------------------------------------------------
--
--Required properties:
--- compatible : "via,vt8500-ehci"
--- reg : Should contain 1 register ranges(address and length)
--- interrupts : ehci controller interrupt
--
--Example:
--
-- ehci@d8007900 {
-- compatible = "via,vt8500-ehci";
-- reg = <0xd8007900 0x200>;
-- interrupts = <43>;
-- };
---- a/Documentation/devicetree/bindings/usb/vt8500-ehci.txt
-+++ /dev/null
-@@ -1,12 +0,0 @@
--VIA VT8500 and Wondermedia WM8xxx SoC USB controllers.
--
--Required properties:
-- - compatible: Should be "via,vt8500-ehci" or "wm,prizm-ehci".
-- - reg: Address range of the ehci registers. size should be 0x200
-- - interrupts: Should contain the ehci interrupt.
--
--usb: ehci@D8007100 {
-- compatible = "wm,prizm-ehci", "usb-ehci";
-- reg = <0xD8007100 0x200>;
-- interrupts = <1>;
--};
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -3,6 +3,7 @@
- *
- * Copyright 2007 Steven Brown <sbrown@cortland.com>
- * Copyright 2010-2012 Hauke Mehrtens <hauke@hauke-m.de>
-+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
- *
- * Derived from the ohci-ssb driver
- * Copyright 2007 Michael Buesch <m@bues.ch>
-@@ -18,6 +19,7 @@
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-+#include <linux/clk.h>
- #include <linux/dma-mapping.h>
- #include <linux/err.h>
- #include <linux/kernel.h>
-@@ -25,6 +27,7 @@
- #include <linux/io.h>
- #include <linux/module.h>
- #include <linux/of.h>
-+#include <linux/phy/phy.h>
- #include <linux/platform_device.h>
- #include <linux/usb.h>
- #include <linux/usb/hcd.h>
-@@ -33,6 +36,13 @@
- #include "ehci.h"
-
- #define DRIVER_DESC "EHCI generic platform driver"
-+#define EHCI_MAX_CLKS 3
-+#define hcd_to_ehci_priv(h) ((struct ehci_platform_priv *)hcd_to_ehci(h)->priv)
-+
-+struct ehci_platform_priv {
-+ struct clk *clks[EHCI_MAX_CLKS];
-+ struct phy *phy;
-+};
-
- static const char hcd_name[] = "ehci-platform";
-
-@@ -45,8 +55,10 @@ static int ehci_platform_reset(struct us
-
- hcd->has_tt = pdata->has_tt;
- ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug;
-- ehci->big_endian_desc = pdata->big_endian_desc;
-- ehci->big_endian_mmio = pdata->big_endian_mmio;
-+ if (pdata->big_endian_desc)
-+ ehci->big_endian_desc = 1;
-+ if (pdata->big_endian_mmio)
-+ ehci->big_endian_mmio = 1;
- ehci->ignore_oc = pdata->ignore_oc;
-
- if (pdata->pre_setup) {
-@@ -65,38 +77,91 @@ static int ehci_platform_reset(struct us
- return 0;
- }
-
-+static int ehci_platform_power_on(struct platform_device *dev)
-+{
-+ struct usb_hcd *hcd = platform_get_drvdata(dev);
-+ struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
-+ int clk, ret;
-+
-+ for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++) {
-+ ret = clk_prepare_enable(priv->clks[clk]);
-+ if (ret)
-+ goto err_disable_clks;
-+ }
-+
-+ if (priv->phy) {
-+ ret = phy_init(priv->phy);
-+ if (ret)
-+ goto err_disable_clks;
-+
-+ ret = phy_power_on(priv->phy);
-+ if (ret)
-+ goto err_exit_phy;
-+ }
-+
-+ return 0;
-+
-+err_exit_phy:
-+ phy_exit(priv->phy);
-+err_disable_clks:
-+ while (--clk >= 0)
-+ clk_disable_unprepare(priv->clks[clk]);
-+
-+ return ret;
-+}
-+
-+static void ehci_platform_power_off(struct platform_device *dev)
-+{
-+ struct usb_hcd *hcd = platform_get_drvdata(dev);
-+ struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
-+ int clk;
-+
-+ if (priv->phy) {
-+ phy_power_off(priv->phy);
-+ phy_exit(priv->phy);
-+ }
-+
-+ for (clk = EHCI_MAX_CLKS - 1; clk >= 0; clk--)
-+ if (priv->clks[clk])
-+ clk_disable_unprepare(priv->clks[clk]);
-+}
-+
- static struct hc_driver __read_mostly ehci_platform_hc_driver;
-
- static const struct ehci_driver_overrides platform_overrides __initconst = {
-- .reset = ehci_platform_reset,
-+ .reset = ehci_platform_reset,
-+ .extra_priv_size = sizeof(struct ehci_platform_priv),
- };
-
--static struct usb_ehci_pdata ehci_platform_defaults;
-+static struct usb_ehci_pdata ehci_platform_defaults = {
-+ .power_on = ehci_platform_power_on,
-+ .power_suspend = ehci_platform_power_off,
-+ .power_off = ehci_platform_power_off,
-+};
-
- static int ehci_platform_probe(struct platform_device *dev)
- {
- struct usb_hcd *hcd;
- struct resource *res_mem;
-- struct usb_ehci_pdata *pdata;
-- int irq;
-- int err;
-+ struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
-+ struct ehci_platform_priv *priv;
-+ struct ehci_hcd *ehci;
-+ int err, irq, clk = 0;
-
- if (usb_disabled())
- return -ENODEV;
-
- /*
-- * use reasonable defaults so platforms don't have to provide these.
-- * with DT probing on ARM, none of these are set.
-+ * Use reasonable defaults so platforms don't have to provide these
-+ * with DT probing on ARM.
- */
-- if (!dev_get_platdata(&dev->dev))
-- dev->dev.platform_data = &ehci_platform_defaults;
-+ if (!pdata)
-+ pdata = &ehci_platform_defaults;
-
- err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
- if (err)
- return err;
-
-- pdata = dev_get_platdata(&dev->dev);
--
- irq = platform_get_irq(dev, 0);
- if (irq < 0) {
- dev_err(&dev->dev, "no irq provided");
-@@ -108,17 +173,66 @@ static int ehci_platform_probe(struct pl
- return -ENXIO;
- }
-
-+ hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev,
-+ dev_name(&dev->dev));
-+ if (!hcd)
-+ return -ENOMEM;
-+
-+ platform_set_drvdata(dev, hcd);
-+ dev->dev.platform_data = pdata;
-+ priv = hcd_to_ehci_priv(hcd);
-+ ehci = hcd_to_ehci(hcd);
-+
-+ if (pdata == &ehci_platform_defaults && dev->dev.of_node) {
-+ if (of_property_read_bool(dev->dev.of_node, "big-endian-regs"))
-+ ehci->big_endian_mmio = 1;
-+
-+ if (of_property_read_bool(dev->dev.of_node, "big-endian-desc"))
-+ ehci->big_endian_desc = 1;
-+
-+ if (of_property_read_bool(dev->dev.of_node, "big-endian"))
-+ ehci->big_endian_mmio = ehci->big_endian_desc = 1;
-+
-+#ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
-+ if (ehci->big_endian_mmio) {
-+ dev_err(&dev->dev,
-+ "Error big-endian-regs not compiled in\n");
-+ err = -EINVAL;
-+ goto err_put_hcd;
-+ }
-+#endif
-+#ifndef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
-+ if (ehci->big_endian_desc) {
-+ dev_err(&dev->dev,
-+ "Error big-endian-desc not compiled in\n");
-+ err = -EINVAL;
-+ goto err_put_hcd;
-+ }
-+#endif
-+ priv->phy = devm_phy_get(&dev->dev, "usb");
-+ if (IS_ERR(priv->phy)) {
-+ err = PTR_ERR(priv->phy);
-+ if (err == -EPROBE_DEFER)
-+ goto err_put_hcd;
-+ priv->phy = NULL;
-+ }
-+
-+ for (clk = 0; clk < EHCI_MAX_CLKS; clk++) {
-+ priv->clks[clk] = of_clk_get(dev->dev.of_node, clk);
-+ if (IS_ERR(priv->clks[clk])) {
-+ err = PTR_ERR(priv->clks[clk]);
-+ if (err == -EPROBE_DEFER)
-+ goto err_put_clks;
-+ priv->clks[clk] = NULL;
-+ break;
-+ }
-+ }
-+ }
-+
- if (pdata->power_on) {
- err = pdata->power_on(dev);
- if (err < 0)
-- return err;
-- }
--
-- hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev,
-- dev_name(&dev->dev));
-- if (!hcd) {
-- err = -ENOMEM;
-- goto err_power;
-+ goto err_put_clks;
- }
-
- hcd->rsrc_start = res_mem->start;
-@@ -127,22 +241,28 @@ static int ehci_platform_probe(struct pl
- hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
- if (IS_ERR(hcd->regs)) {
- err = PTR_ERR(hcd->regs);
-- goto err_put_hcd;
-+ goto err_power;
- }
- err = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (err)
-- goto err_put_hcd;
-+ goto err_power;
-
- device_wakeup_enable(hcd->self.controller);
- platform_set_drvdata(dev, hcd);
-
- return err;
-
--err_put_hcd:
-- usb_put_hcd(hcd);
- err_power:
- if (pdata->power_off)
- pdata->power_off(dev);
-+err_put_clks:
-+ while (--clk >= 0)
-+ clk_put(priv->clks[clk]);
-+err_put_hcd:
-+ if (pdata == &ehci_platform_defaults)
-+ dev->dev.platform_data = NULL;
-+
-+ usb_put_hcd(hcd);
-
- return err;
- }
-@@ -151,13 +271,19 @@ static int ehci_platform_remove(struct p
- {
- struct usb_hcd *hcd = platform_get_drvdata(dev);
- struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
-+ struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
-+ int clk;
-
- usb_remove_hcd(hcd);
-- usb_put_hcd(hcd);
-
- if (pdata->power_off)
- pdata->power_off(dev);
-
-+ for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++)
-+ clk_put(priv->clks[clk]);
-+
-+ usb_put_hcd(hcd);
-+
- if (pdata == &ehci_platform_defaults)
- dev->dev.platform_data = NULL;
-
-@@ -208,8 +334,10 @@ static int ehci_platform_resume(struct d
- static const struct of_device_id vt8500_ehci_ids[] = {
- { .compatible = "via,vt8500-ehci", },
- { .compatible = "wm,prizm-ehci", },
-+ { .compatible = "generic-ehci", },
- {}
- };
-+MODULE_DEVICE_TABLE(of, vt8500_ehci_ids);
-
- static const struct platform_device_id ehci_platform_table[] = {
- { "ehci-platform", 0 },
diff --git a/target/linux/sunxi/patches-3.14/195-3-uhci-plat-changes.patch b/target/linux/sunxi/patches-3.14/195-3-uhci-plat-changes.patch
deleted file mode 100644
index 53c808fbb3..0000000000
--- a/target/linux/sunxi/patches-3.14/195-3-uhci-plat-changes.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From 2adf0917bc9d6db8d957d56c8289a623be4027b6 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Tue, 11 Feb 2014 17:41:48 +0100
-Subject: [PATCH] uhci-platform: Change compatible string from platform-uhci to
- generic-uhci
-
-This brings the uhci-platform bindings in sync with what we've done for
-the ohci- and ehci-platform drivers. As discussed there using platform as a
-prefix is a bit weird as the platform bus is a Linux specific thing and
-the bindings are supposed to be OS agnostic.
-
-Note that the old platform-uhci compatible string is kept around for, well,
-compatibility reasons.
-
-While at it rename the bindings txt file to match the name of all the
-other ?hci-platform bindings docs.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- Documentation/devicetree/bindings/usb/platform-uhci.txt | 15 ---------------
- Documentation/devicetree/bindings/usb/usb-uhci.txt | 15 +++++++++++++++
- drivers/usb/host/uhci-platform.c | 1 +
- 3 files changed, 16 insertions(+), 15 deletions(-)
- delete mode 100644 Documentation/devicetree/bindings/usb/platform-uhci.txt
- create mode 100644 Documentation/devicetree/bindings/usb/usb-uhci.txt
-
---- a/Documentation/devicetree/bindings/usb/platform-uhci.txt
-+++ /dev/null
-@@ -1,15 +0,0 @@
--Generic Platform UHCI Controller
-------------------------------------------------------
--
--Required properties:
--- compatible : "platform-uhci"
--- reg : Should contain 1 register ranges(address and length)
--- interrupts : UHCI controller interrupt
--
--Example:
--
-- uhci@d8007b00 {
-- compatible = "platform-uhci";
-- reg = <0xd8007b00 0x200>;
-- interrupts = <43>;
-- };
---- /dev/null
-+++ b/Documentation/devicetree/bindings/usb/usb-uhci.txt
-@@ -0,0 +1,15 @@
-+Generic Platform UHCI Controller
-+-----------------------------------------------------
-+
-+Required properties:
-+- compatible : "generic-uhci" (deprecated: "platform-uhci")
-+- reg : Should contain 1 register ranges(address and length)
-+- interrupts : UHCI controller interrupt
-+
-+Example:
-+
-+ uhci@d8007b00 {
-+ compatible = "generic-uhci";
-+ reg = <0xd8007b00 0x200>;
-+ interrupts = <43>;
-+ };
---- a/drivers/usb/host/uhci-platform.c
-+++ b/drivers/usb/host/uhci-platform.c
-@@ -148,6 +148,7 @@ static void uhci_hcd_platform_shutdown(s
- }
-
- static const struct of_device_id platform_uhci_ids[] = {
-+ { .compatible = "generic-uhci", },
- { .compatible = "platform-uhci", },
- {}
- };
diff --git a/target/linux/sunxi/patches-3.14/195-4-xhci-plat-changes.patch b/target/linux/sunxi/patches-3.14/195-4-xhci-plat-changes.patch
deleted file mode 100644
index 09c3076cd8..0000000000
--- a/target/linux/sunxi/patches-3.14/195-4-xhci-plat-changes.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 8fd033e1b6cdd30c32762ef1c5e2216226dd61e1 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Tue, 11 Feb 2014 17:50:51 +0100
-Subject: [PATCH] xhci-platform: Change compatible string from xhci-platform to
- generic-xhci
-
-This brings the xhci-platform bindings in sync with what we've done for
-the ohci- and ehci-platform drivers. As discussed there using platform as a
-postfix is a bit weird as the platform bus is a Linux specific thing and
-the bindings are supposed to be OS agnostic.
-
-Note that the old xhci-platform compatible string is kept around for, well,
-compatibility reasons.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- Documentation/devicetree/bindings/usb/usb-xhci.txt | 4 ++--
- drivers/usb/host/xhci-plat.c | 1 +
- 2 files changed, 3 insertions(+), 2 deletions(-)
-
---- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
-+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
-@@ -1,14 +1,14 @@
- USB xHCI controllers
-
- Required properties:
-- - compatible: should be "xhci-platform".
-+ - compatible: should be "generic-xhci" (deprecated: "xhci-platform").
- - reg: should contain address and length of the standard XHCI
- register set for the device.
- - interrupts: one XHCI interrupt should be described here.
-
- Example:
- usb@f0931000 {
-- compatible = "xhci-platform";
-+ compatible = "generic-xhci";
- reg = <0xf0931000 0x8c8>;
- interrupts = <0x0 0x4e 0x0>;
- };
---- a/drivers/usb/host/xhci-plat.c
-+++ b/drivers/usb/host/xhci-plat.c
-@@ -234,6 +234,7 @@ static const struct dev_pm_ops xhci_plat
-
- #ifdef CONFIG_OF
- static const struct of_device_id usb_xhci_of_match[] = {
-+ { .compatible = "generic-xhci" },
- { .compatible = "xhci-platform" },
- { },
- };
diff --git a/target/linux/sunxi/patches-3.14/196-usb-add-sunxi-phy-driver.patch b/target/linux/sunxi/patches-3.14/196-usb-add-sunxi-phy-driver.patch
deleted file mode 100644
index 5f1ea836bd..0000000000
--- a/target/linux/sunxi/patches-3.14/196-usb-add-sunxi-phy-driver.patch
+++ /dev/null
@@ -1,410 +0,0 @@
-From 56feaa546c5ce4152fe14f725e9fc6b85f8a565b Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Sat, 4 Jan 2014 23:56:17 +0100
-Subject: [PATCH] PHY: sunxi: Add driver for sunxi usb phy
-
-The Allwinner A1x / A2x SoCs have 2 or 3 usb phys which are all accessed
-through a single set of registers. Besides this there are also some other
-phy related bits which need poking, which are per phy, but shared between the
-ohci and ehci controllers, so these are also controlled from this new phy
-driver.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- .../devicetree/bindings/phy/sun4i-usb-phy.txt | 26 ++
- drivers/phy/Kconfig | 11 +
- drivers/phy/Makefile | 1 +
- drivers/phy/phy-sun4i-usb.c | 331 +++++++++++++++++++++
- 4 files changed, 369 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
- create mode 100644 drivers/phy/phy-sun4i-usb.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
-@@ -0,0 +1,26 @@
-+Allwinner sun4i USB PHY
-+-----------------------
-+
-+Required properties:
-+- compatible : should be one of "allwinner,sun4i-a10-usb-phy",
-+ "allwinner,sun5i-a13-usb-phy" or "allwinner,sun7i-a20-usb-phy"
-+- reg : a list of offset + length pairs
-+- reg-names : "phy_ctrl", "pmu1" and for sun4i or sun7i "pmu2"
-+- #phy-cells : from the generic phy bindings, must be 1
-+- clocks : phandle + clock specifier for the phy clock
-+- clock-names : "usb_phy"
-+- resets : a list of phandle + reset specifier pairs
-+- reset-names : "usb0_reset", "usb1_reset" and for sun4i or sun7i "usb2_reset"
-+
-+Example:
-+ usbphy: phy@0x01c13400 {
-+ #phy-cells = <1>;
-+ compatible = "allwinner,sun4i-a10-usb-phy";
-+ /* phy base regs, phy1 pmu reg, phy2 pmu reg */
-+ reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
-+ reg-names = "phy_ctrl", "pmu1", "pmu2";
-+ clocks = <&usb_clk 8>;
-+ clock-names = "usb_phy";
-+ resets = <&usb_clk 1>, <&usb_clk 2>;
-+ reset-names = "usb1_reset", "usb2_reset";
-+ };
---- a/drivers/phy/Kconfig
-+++ b/drivers/phy/Kconfig
-@@ -65,4 +65,15 @@ config BCM_KONA_USB2_PHY
- help
- Enable this to support the Broadcom Kona USB 2.0 PHY.
-
-+config PHY_SUN4I_USB
-+ tristate "Allwinner sunxi SoC USB PHY driver"
-+ depends on ARCH_SUNXI && HAS_IOMEM && OF
-+ select GENERIC_PHY
-+ help
-+ Enable this to support the transceiver that is part of Allwinner
-+ sunxi SoCs.
-+
-+ This driver controls the entire USB PHY block, both the USB OTG
-+ parts, as well as the 2 regular USB 2 host PHYs.
-+
- endmenu
---- a/drivers/phy/Makefile
-+++ b/drivers/phy/Makefile
-@@ -9,3 +9,4 @@ obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += p
- obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
- obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
- obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
-+obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
---- /dev/null
-+++ b/drivers/phy/phy-sun4i-usb.c
-@@ -0,0 +1,331 @@
-+/*
-+ * Allwinner sun4i USB phy driver
-+ *
-+ * Copyright (C) 2014 Hans de Goede <hdegoede@redhat.com>
-+ *
-+ * Based on code from
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ *
-+ * Modelled after: Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver
-+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
-+ * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/mutex.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/phy/phy.h>
-+#include <linux/platform_device.h>
-+#include <linux/regulator/consumer.h>
-+#include <linux/reset.h>
-+
-+#define REG_ISCR 0x00
-+#define REG_PHYCTL 0x04
-+#define REG_PHYBIST 0x08
-+#define REG_PHYTUNE 0x0c
-+
-+#define PHYCTL_DATA BIT(7)
-+
-+#define SUNXI_AHB_ICHR8_EN BIT(10)
-+#define SUNXI_AHB_INCR4_BURST_EN BIT(9)
-+#define SUNXI_AHB_INCRX_ALIGN_EN BIT(8)
-+#define SUNXI_ULPI_BYPASS_EN BIT(0)
-+
-+/* Common Control Bits for Both PHYs */
-+#define PHY_PLL_BW 0x03
-+#define PHY_RES45_CAL_EN 0x0c
-+
-+/* Private Control Bits for Each PHY */
-+#define PHY_TX_AMPLITUDE_TUNE 0x20
-+#define PHY_TX_SLEWRATE_TUNE 0x22
-+#define PHY_VBUSVALID_TH_SEL 0x25
-+#define PHY_PULLUP_RES_SEL 0x27
-+#define PHY_OTG_FUNC_EN 0x28
-+#define PHY_VBUS_DET_EN 0x29
-+#define PHY_DISCON_TH_SEL 0x2a
-+
-+#define MAX_PHYS 3
-+
-+struct sun4i_usb_phy_data {
-+ struct clk *clk;
-+ void __iomem *base;
-+ struct mutex mutex;
-+ int num_phys;
-+ u32 disc_thresh;
-+ struct sun4i_usb_phy {
-+ struct phy *phy;
-+ void __iomem *pmu;
-+ struct regulator *vbus;
-+ struct reset_control *reset;
-+ int index;
-+ } phys[MAX_PHYS];
-+};
-+
-+#define to_sun4i_usb_phy_data(phy) \
-+ container_of((phy), struct sun4i_usb_phy_data, phys[(phy)->index])
-+
-+static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
-+ int len)
-+{
-+ struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy);
-+ u32 temp, usbc_bit = BIT(phy->index * 2);
-+ int i;
-+
-+ mutex_lock(&phy_data->mutex);
-+
-+ for (i = 0; i < len; i++) {
-+ temp = readl(phy_data->base + REG_PHYCTL);
-+
-+ /* clear the address portion */
-+ temp &= ~(0xff << 8);
-+
-+ /* set the address */
-+ temp |= ((addr + i) << 8);
-+ writel(temp, phy_data->base + REG_PHYCTL);
-+
-+ /* set the data bit and clear usbc bit*/
-+ temp = readb(phy_data->base + REG_PHYCTL);
-+ if (data & 0x1)
-+ temp |= PHYCTL_DATA;
-+ else
-+ temp &= ~PHYCTL_DATA;
-+ temp &= ~usbc_bit;
-+ writeb(temp, phy_data->base + REG_PHYCTL);
-+
-+ /* pulse usbc_bit */
-+ temp = readb(phy_data->base + REG_PHYCTL);
-+ temp |= usbc_bit;
-+ writeb(temp, phy_data->base + REG_PHYCTL);
-+
-+ temp = readb(phy_data->base + REG_PHYCTL);
-+ temp &= ~usbc_bit;
-+ writeb(temp, phy_data->base + REG_PHYCTL);
-+
-+ data >>= 1;
-+ }
-+ mutex_unlock(&phy_data->mutex);
-+}
-+
-+static void sun4i_usb_phy_passby(struct sun4i_usb_phy *phy, int enable)
-+{
-+ u32 bits, reg_value;
-+
-+ if (!phy->pmu)
-+ return;
-+
-+ bits = SUNXI_AHB_ICHR8_EN | SUNXI_AHB_INCR4_BURST_EN |
-+ SUNXI_AHB_INCRX_ALIGN_EN | SUNXI_ULPI_BYPASS_EN;
-+
-+ reg_value = readl(phy->pmu);
-+
-+ if (enable)
-+ reg_value |= bits;
-+ else
-+ reg_value &= ~bits;
-+
-+ writel(reg_value, phy->pmu);
-+}
-+
-+static int sun4i_usb_phy_init(struct phy *_phy)
-+{
-+ struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
-+ struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
-+ int ret;
-+
-+ ret = clk_prepare_enable(data->clk);
-+ if (ret)
-+ return ret;
-+
-+ ret = reset_control_deassert(phy->reset);
-+ if (ret) {
-+ clk_disable_unprepare(data->clk);
-+ return ret;
-+ }
-+
-+ /* Adjust PHY's magnitude and rate */
-+ sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5);
-+
-+ /* Disconnect threshold adjustment */
-+ sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL, data->disc_thresh, 2);
-+
-+ sun4i_usb_phy_passby(phy, 1);
-+
-+ return 0;
-+}
-+
-+static int sun4i_usb_phy_exit(struct phy *_phy)
-+{
-+ struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
-+ struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
-+
-+ sun4i_usb_phy_passby(phy, 0);
-+ reset_control_assert(phy->reset);
-+ clk_disable_unprepare(data->clk);
-+
-+ return 0;
-+}
-+
-+static int sun4i_usb_phy_power_on(struct phy *_phy)
-+{
-+ struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
-+ int ret = 0;
-+
-+ if (phy->vbus)
-+ ret = regulator_enable(phy->vbus);
-+
-+ return ret;
-+}
-+
-+static int sun4i_usb_phy_power_off(struct phy *_phy)
-+{
-+ struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
-+
-+ if (phy->vbus)
-+ regulator_disable(phy->vbus);
-+
-+ return 0;
-+}
-+
-+static struct phy_ops sun4i_usb_phy_ops = {
-+ .init = sun4i_usb_phy_init,
-+ .exit = sun4i_usb_phy_exit,
-+ .power_on = sun4i_usb_phy_power_on,
-+ .power_off = sun4i_usb_phy_power_off,
-+ .owner = THIS_MODULE,
-+};
-+
-+static struct phy *sun4i_usb_phy_xlate(struct device *dev,
-+ struct of_phandle_args *args)
-+{
-+ struct sun4i_usb_phy_data *data = dev_get_drvdata(dev);
-+
-+ if (WARN_ON(args->args[0] == 0 || args->args[0] >= data->num_phys))
-+ return ERR_PTR(-ENODEV);
-+
-+ return data->phys[args->args[0]].phy;
-+}
-+
-+static int sun4i_usb_phy_probe(struct platform_device *pdev)
-+{
-+ struct sun4i_usb_phy_data *data;
-+ struct device *dev = &pdev->dev;
-+ struct device_node *np = dev->of_node;
-+ void __iomem *pmu = NULL;
-+ struct phy_provider *phy_provider;
-+ struct reset_control *reset;
-+ struct regulator *vbus;
-+ struct resource *res;
-+ struct phy *phy;
-+ char name[16];
-+ int i;
-+
-+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
-+ if (!data)
-+ return -ENOMEM;
-+
-+ mutex_init(&data->mutex);
-+
-+ if (of_device_is_compatible(np, "allwinner,sun5i-a13-usb-phy"))
-+ data->num_phys = 2;
-+ else
-+ data->num_phys = 3;
-+
-+ if (of_device_is_compatible(np, "allwinner,sun4i-a10-usb-phy"))
-+ data->disc_thresh = 3;
-+ else
-+ data->disc_thresh = 2;
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl");
-+ data->base = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(data->base))
-+ return PTR_ERR(data->base);
-+
-+ data->clk = devm_clk_get(dev, "usb_phy");
-+ if (IS_ERR(data->clk)) {
-+ dev_err(dev, "could not get usb_phy clock\n");
-+ return PTR_ERR(data->clk);
-+ }
-+
-+ /* Skip 0, 0 is the phy for otg which is not yet supported. */
-+ for (i = 1; i < data->num_phys; i++) {
-+ snprintf(name, sizeof(name), "usb%d_vbus", i);
-+ vbus = devm_regulator_get_optional(dev, name);
-+ if (IS_ERR(vbus)) {
-+ if (PTR_ERR(vbus) == -EPROBE_DEFER)
-+ return -EPROBE_DEFER;
-+ vbus = NULL;
-+ }
-+
-+ snprintf(name, sizeof(name), "usb%d_reset", i);
-+ reset = devm_reset_control_get(dev, name);
-+ if (IS_ERR(reset)) {
-+ dev_err(dev, "failed to get reset %s\n", name);
-+ return PTR_ERR(reset);
-+ }
-+
-+ if (i) { /* No pmu for usbc0 */
-+ snprintf(name, sizeof(name), "pmu%d", i);
-+ res = platform_get_resource_byname(pdev,
-+ IORESOURCE_MEM, name);
-+ pmu = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(pmu))
-+ return PTR_ERR(pmu);
-+ }
-+
-+ phy = devm_phy_create(dev, &sun4i_usb_phy_ops, NULL);
-+ if (IS_ERR(phy)) {
-+ dev_err(dev, "failed to create PHY %d\n", i);
-+ return PTR_ERR(phy);
-+ }
-+
-+ data->phys[i].phy = phy;
-+ data->phys[i].pmu = pmu;
-+ data->phys[i].vbus = vbus;
-+ data->phys[i].reset = reset;
-+ data->phys[i].index = i;
-+ phy_set_drvdata(phy, &data->phys[i]);
-+ }
-+
-+ dev_set_drvdata(dev, data);
-+ phy_provider = devm_of_phy_provider_register(dev, sun4i_usb_phy_xlate);
-+ if (IS_ERR(phy_provider))
-+ return PTR_ERR(phy_provider);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id sun4i_usb_phy_of_match[] = {
-+ { .compatible = "allwinner,sun4i-a10-usb-phy" },
-+ { .compatible = "allwinner,sun5i-a13-usb-phy" },
-+ { .compatible = "allwinner,sun7i-a20-usb-phy" },
-+ { },
-+};
-+MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
-+
-+static struct platform_driver sun4i_usb_phy_driver = {
-+ .probe = sun4i_usb_phy_probe,
-+ .driver = {
-+ .of_match_table = sun4i_usb_phy_of_match,
-+ .name = "sun4i-usb-phy",
-+ .owner = THIS_MODULE,
-+ }
-+};
-+module_platform_driver(sun4i_usb_phy_driver);
-+
-+MODULE_DESCRIPTION("Allwinner sun4i USB phy driver");
-+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/sunxi/patches-3.14/200-mmc-add-driver.patch b/target/linux/sunxi/patches-3.14/200-mmc-add-driver.patch
deleted file mode 100644
index ece71540c3..0000000000
--- a/target/linux/sunxi/patches-3.14/200-mmc-add-driver.patch
+++ /dev/null
@@ -1,1150 +0,0 @@
-From a2fb45195f1b90058e96e09892c071ef4207b593 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?David=20Lanzend=C3=B6rfer?= <david.lanzendoerfer@o2s.ch>
-Date: Sat, 22 Feb 2014 09:13:55 +0100
-Subject: [PATCH] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner
- sunxi SoCs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This is based on the driver Allwinner ships in their Android kernel sources.
-
-Initial porting to upstream kernels done by David Lanzendörfer, additional
-fixes and cleanups by Hans de Goede.
-
-It uses dma in bus-master mode using a built-in designware idmac controller,
-which is identical to the one found in the mmc-dw hosts.
-The rest of the host is not identical to mmc-dw.
-
-Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- drivers/mmc/host/Kconfig | 7 +
- drivers/mmc/host/Makefile | 2 +
- drivers/mmc/host/sunxi-mmc.c | 853 +++++++++++++++++++++++++++++++++++++++++++
- drivers/mmc/host/sunxi-mmc.h | 238 ++++++++++++
- 4 files changed, 1100 insertions(+)
- create mode 100644 drivers/mmc/host/sunxi-mmc.c
- create mode 100644 drivers/mmc/host/sunxi-mmc.h
-
---- a/drivers/mmc/host/Kconfig
-+++ b/drivers/mmc/host/Kconfig
-@@ -714,3 +714,10 @@ config MMC_REALTEK_PCI
- help
- Say Y here to include driver code to support SD/MMC card interface
- of Realtek PCI-E card reader
-+
-+config MMC_SUNXI
-+ tristate "Allwinner sunxi SD/MMC Host Controller support"
-+ depends on ARCH_SUNXI
-+ help
-+ This selects support for the SD/MMC Host Controller on
-+ Allwinner sunxi SoCs.
---- a/drivers/mmc/host/Makefile
-+++ b/drivers/mmc/host/Makefile
-@@ -55,6 +55,8 @@ obj-$(CONFIG_MMC_WMT) += wmt-sdmmc.o
-
- obj-$(CONFIG_MMC_REALTEK_PCI) += rtsx_pci_sdmmc.o
-
-+obj-$(CONFIG_MMC_SUNXI) += sunxi-mmc.o
-+
- obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o
- obj-$(CONFIG_MMC_SDHCI_CNS3XXX) += sdhci-cns3xxx.o
- obj-$(CONFIG_MMC_SDHCI_ESDHC_IMX) += sdhci-esdhc-imx.o
---- /dev/null
-+++ b/drivers/mmc/host/sunxi-mmc.c
-@@ -0,0 +1,853 @@
-+/*
-+ * Driver for sunxi SD/MMC host controllers
-+ * (C) Copyright 2007-2011 Reuuimlla Technology Co., Ltd.
-+ * (C) Copyright 2007-2011 Aaron Maoye <leafy.myeh@reuuimllatech.com>
-+ * (C) Copyright 2013-2014 O2S GmbH <www.o2s.ch>
-+ * (C) Copyright 2013-2014 David Lanzendörfer <david.lanzendoerfer@o2s.ch>
-+ * (C) Copyright 2013-2014 Hans de Goede <hdegoede@redhat.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/io.h>
-+#include <linux/device.h>
-+#include <linux/interrupt.h>
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+
-+#include <linux/clk.h>
-+#include <linux/clk-private.h>
-+#include <linux/clk/sunxi.h>
-+
-+#include <linux/gpio.h>
-+#include <linux/platform_device.h>
-+#include <linux/spinlock.h>
-+#include <linux/scatterlist.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/slab.h>
-+#include <linux/regulator/consumer.h>
-+
-+#include <linux/of_address.h>
-+#include <linux/of_gpio.h>
-+#include <linux/of_platform.h>
-+
-+#include <linux/mmc/host.h>
-+#include <linux/mmc/sd.h>
-+#include <linux/mmc/sdio.h>
-+#include <linux/mmc/mmc.h>
-+#include <linux/mmc/core.h>
-+#include <linux/mmc/card.h>
-+#include <linux/mmc/slot-gpio.h>
-+
-+#include "sunxi-mmc.h"
-+
-+static int sunxi_mmc_init_host(struct mmc_host *mmc)
-+{
-+ u32 rval;
-+ struct sunxi_mmc_host *smc_host = mmc_priv(mmc);
-+ int ret;
-+
-+ ret = clk_prepare_enable(smc_host->clk_ahb);
-+ if (ret) {
-+ dev_err(mmc_dev(smc_host->mmc), "AHB clk err %d\n", ret);
-+ return ret;
-+ }
-+ ret = clk_prepare_enable(smc_host->clk_mod);
-+ if (ret) {
-+ dev_err(mmc_dev(smc_host->mmc), "MOD clk err %d\n", ret);
-+ clk_disable_unprepare(smc_host->clk_ahb);
-+ return ret;
-+ }
-+
-+ /* reset controller */
-+ rval = mci_readl(smc_host, REG_GCTRL) | SDXC_HARDWARE_RESET;
-+ mci_writel(smc_host, REG_GCTRL, rval);
-+
-+ mci_writel(smc_host, REG_FTRGL, 0x20070008);
-+ mci_writel(smc_host, REG_TMOUT, 0xffffffff);
-+ mci_writel(smc_host, REG_IMASK, smc_host->sdio_imask);
-+ mci_writel(smc_host, REG_RINTR, 0xffffffff);
-+ mci_writel(smc_host, REG_DBGC, 0xdeb);
-+ mci_writel(smc_host, REG_FUNS, 0xceaa0000);
-+ mci_writel(smc_host, REG_DLBA, smc_host->sg_dma);
-+ rval = mci_readl(smc_host, REG_GCTRL)|SDXC_INTERRUPT_ENABLE_BIT;
-+ rval &= ~SDXC_ACCESS_DONE_DIRECT;
-+ mci_writel(smc_host, REG_GCTRL, rval);
-+
-+ return 0;
-+}
-+
-+static void sunxi_mmc_exit_host(struct sunxi_mmc_host *smc_host)
-+{
-+ mci_writel(smc_host, REG_GCTRL, SDXC_HARDWARE_RESET);
-+ clk_disable_unprepare(smc_host->clk_ahb);
-+ clk_disable_unprepare(smc_host->clk_mod);
-+}
-+
-+/* /\* UHS-I Operation Modes */
-+/* * DS 25MHz 12.5MB/s 3.3V */
-+/* * HS 50MHz 25MB/s 3.3V */
-+/* * SDR12 25MHz 12.5MB/s 1.8V */
-+/* * SDR25 50MHz 25MB/s 1.8V */
-+/* * SDR50 100MHz 50MB/s 1.8V */
-+/* * SDR104 208MHz 104MB/s 1.8V */
-+/* * DDR50 50MHz 50MB/s 1.8V */
-+/* * MMC Operation Modes */
-+/* * DS 26MHz 26MB/s 3/1.8/1.2V */
-+/* * HS 52MHz 52MB/s 3/1.8/1.2V */
-+/* * HSDDR 52MHz 104MB/s 3/1.8/1.2V */
-+/* * HS200 200MHz 200MB/s 1.8/1.2V */
-+/* * */
-+/* * Spec. Timing */
-+/* * SD3.0 */
-+/* * Fcclk Tcclk Fsclk Tsclk Tis Tih odly RTis RTih */
-+/* * 400K 2.5us 24M 41ns 5ns 5ns 1 2209ns 41ns */
-+/* * 25M 40ns 600M 1.67ns 5ns 5ns 3 14.99ns 5.01ns */
-+/* * 50M 20ns 600M 1.67ns 6ns 2ns 3 14.99ns 5.01ns */
-+/* * 50MDDR 20ns 600M 1.67ns 6ns 0.8ns 2 6.67ns 3.33ns */
-+/* * 104M 9.6ns 600M 1.67ns 3ns 0.8ns 1 7.93ns 1.67ns */
-+/* * 208M 4.8ns 600M 1.67ns 1.4ns 0.8ns 1 3.33ns 1.67ns */
-+
-+/* * 25M 40ns 300M 3.33ns 5ns 5ns 2 13.34ns 6.66ns */
-+/* * 50M 20ns 300M 3.33ns 6ns 2ns 2 13.34ns 6.66ns */
-+/* * 50MDDR 20ns 300M 3.33ns 6ns 0.8ns 1 6.67ns 3.33ns */
-+/* * 104M 9.6ns 300M 3.33ns 3ns 0.8ns 0 7.93ns 1.67ns */
-+/* * 208M 4.8ns 300M 3.33ns 1.4ns 0.8ns 0 3.13ns 1.67ns */
-+
-+/* * eMMC4.5 */
-+/* * 400K 2.5us 24M 41ns 3ns 3ns 1 2209ns 41ns */
-+/* * 25M 40ns 600M 1.67ns 3ns 3ns 3 14.99ns 5.01ns */
-+/* * 50M 20ns 600M 1.67ns 3ns 3ns 3 14.99ns 5.01ns */
-+/* * 50MDDR 20ns 600M 1.67ns 2.5ns 2.5ns 2 6.67ns 3.33ns */
-+/* * 200M 5ns 600M 1.67ns 1.4ns 0.8ns 1 3.33ns 1.67ns */
-+/* *\/ */
-+
-+static void sunxi_mmc_init_idma_des(struct sunxi_mmc_host *host,
-+ struct mmc_data *data)
-+{
-+ struct sunxi_idma_des *pdes = (struct sunxi_idma_des *)host->sg_cpu;
-+ struct sunxi_idma_des *pdes_pa = (struct sunxi_idma_des *)host->sg_dma;
-+ int i, max_len = (1 << host->idma_des_size_bits);
-+
-+ for (i = 0; i < data->sg_len; i++) {
-+ pdes[i].config = SDXC_IDMAC_DES0_CH | SDXC_IDMAC_DES0_OWN |
-+ SDXC_IDMAC_DES0_DIC;
-+
-+ if (data->sg[i].length == max_len)
-+ pdes[i].buf_size = 0; /* 0 == max_len */
-+ else
-+ pdes[i].buf_size = data->sg[i].length;
-+
-+ pdes[i].buf_addr_ptr1 = sg_dma_address(&data->sg[i]);
-+ pdes[i].buf_addr_ptr2 = (u32)&pdes_pa[i + 1];
-+ }
-+
-+ pdes[0].config |= SDXC_IDMAC_DES0_FD;
-+ pdes[i - 1].config = SDXC_IDMAC_DES0_OWN | SDXC_IDMAC_DES0_LD;
-+
-+ wmb(); /* Ensure idma_des hit main mem before we start the idmac */
-+}
-+
-+static enum dma_data_direction sunxi_mmc_get_dma_dir(struct mmc_data *data)
-+{
-+ if (data->flags & MMC_DATA_WRITE)
-+ return DMA_TO_DEVICE;
-+ else
-+ return DMA_FROM_DEVICE;
-+}
-+
-+static int sunxi_mmc_prepare_dma(struct sunxi_mmc_host *smc_host,
-+ struct mmc_data *data)
-+{
-+ u32 dma_len;
-+ u32 i;
-+ u32 temp;
-+ struct scatterlist *sg;
-+
-+ dma_len = dma_map_sg(mmc_dev(smc_host->mmc), data->sg, data->sg_len,
-+ sunxi_mmc_get_dma_dir(data));
-+ if (dma_len == 0) {
-+ dev_err(mmc_dev(smc_host->mmc), "dma_map_sg failed\n");
-+ return -ENOMEM;
-+ }
-+
-+ for_each_sg(data->sg, sg, data->sg_len, i) {
-+ if (sg->offset & 3 || sg->length & 3) {
-+ dev_err(mmc_dev(smc_host->mmc),
-+ "unaligned scatterlist: os %x length %d\n",
-+ sg->offset, sg->length);
-+ return -EINVAL;
-+ }
-+ }
-+
-+ sunxi_mmc_init_idma_des(smc_host, data);
-+
-+ temp = mci_readl(smc_host, REG_GCTRL);
-+ temp |= SDXC_DMA_ENABLE_BIT;
-+ mci_writel(smc_host, REG_GCTRL, temp);
-+ temp |= SDXC_DMA_RESET;
-+ mci_writel(smc_host, REG_GCTRL, temp);
-+ mci_writel(smc_host, REG_DMAC, SDXC_IDMAC_SOFT_RESET);
-+
-+ if (!(data->flags & MMC_DATA_WRITE))
-+ mci_writel(smc_host, REG_IDIE, SDXC_IDMAC_RECEIVE_INTERRUPT);
-+
-+ mci_writel(smc_host, REG_DMAC, SDXC_IDMAC_FIX_BURST | SDXC_IDMAC_IDMA_ON);
-+
-+ return 0;
-+}
-+
-+static void sunxi_mmc_send_manual_stop(struct sunxi_mmc_host *host,
-+ struct mmc_request *req)
-+{
-+ u32 cmd_val = SDXC_START | SDXC_RESP_EXPIRE | SDXC_STOP_ABORT_CMD
-+ | SDXC_CHECK_RESPONSE_CRC | MMC_STOP_TRANSMISSION;
-+ u32 ri = 0;
-+ unsigned long expire = jiffies + msecs_to_jiffies(1000);
-+
-+ mci_writel(host, REG_CARG, 0);
-+ mci_writel(host, REG_CMDR, cmd_val);
-+
-+ do {
-+ ri = mci_readl(host, REG_RINTR);
-+ } while (!(ri & (SDXC_COMMAND_DONE | SDXC_INTERRUPT_ERROR_BIT)) &&
-+ time_before(jiffies, expire));
-+
-+ if (ri & SDXC_INTERRUPT_ERROR_BIT) {
-+ dev_err(mmc_dev(host->mmc), "send stop command failed\n");
-+ if (req->stop)
-+ req->stop->resp[0] = -ETIMEDOUT;
-+ } else {
-+ if (req->stop)
-+ req->stop->resp[0] = mci_readl(host, REG_RESP0);
-+ }
-+
-+ mci_writel(host, REG_RINTR, 0xffff);
-+}
-+
-+static void sunxi_mmc_dump_errinfo(struct sunxi_mmc_host *smc_host)
-+{
-+ struct mmc_command *cmd = smc_host->mrq->cmd;
-+ struct mmc_data *data = smc_host->mrq->data;
-+
-+ /* For some cmds timeout is normal with sd/mmc cards */
-+ if ((smc_host->int_sum & SDXC_INTERRUPT_ERROR_BIT) == SDXC_RESP_TIMEOUT &&
-+ (cmd->opcode == SD_IO_SEND_OP_COND || cmd->opcode == SD_IO_RW_DIRECT))
-+ return;
-+
-+ dev_err(mmc_dev(smc_host->mmc),
-+ "smc %d err, cmd %d,%s%s%s%s%s%s%s%s%s%s !!\n",
-+ smc_host->mmc->index, cmd->opcode,
-+ data ? (data->flags & MMC_DATA_WRITE ? " WR" : " RD") : "",
-+ smc_host->int_sum & SDXC_RESP_ERROR ? " RE" : "",
-+ smc_host->int_sum & SDXC_RESP_CRC_ERROR ? " RCE" : "",
-+ smc_host->int_sum & SDXC_DATA_CRC_ERROR ? " DCE" : "",
-+ smc_host->int_sum & SDXC_RESP_TIMEOUT ? " RTO" : "",
-+ smc_host->int_sum & SDXC_DATA_TIMEOUT ? " DTO" : "",
-+ smc_host->int_sum & SDXC_FIFO_RUN_ERROR ? " FE" : "",
-+ smc_host->int_sum & SDXC_HARD_WARE_LOCKED ? " HL" : "",
-+ smc_host->int_sum & SDXC_START_BIT_ERROR ? " SBE" : "",
-+ smc_host->int_sum & SDXC_END_BIT_ERROR ? " EBE" : ""
-+ );
-+}
-+
-+static void sunxi_mmc_finalize_request(struct sunxi_mmc_host *host)
-+{
-+ struct mmc_request *mrq;
-+ unsigned long iflags;
-+
-+ spin_lock_irqsave(&host->lock, iflags);
-+
-+ mrq = host->mrq;
-+ if (!mrq) {
-+ spin_unlock_irqrestore(&host->lock, iflags);
-+ dev_err(mmc_dev(host->mmc), "no request to finalize\n");
-+ return;
-+ }
-+
-+ if (host->int_sum & SDXC_INTERRUPT_ERROR_BIT) {
-+ sunxi_mmc_dump_errinfo(host);
-+ mrq->cmd->error = -ETIMEDOUT;
-+ if (mrq->data)
-+ mrq->data->error = -ETIMEDOUT;
-+ if (mrq->stop)
-+ mrq->stop->error = -ETIMEDOUT;
-+ } else {
-+ if (mrq->cmd->flags & MMC_RSP_136) {
-+ mrq->cmd->resp[0] = mci_readl(host, REG_RESP3);
-+ mrq->cmd->resp[1] = mci_readl(host, REG_RESP2);
-+ mrq->cmd->resp[2] = mci_readl(host, REG_RESP1);
-+ mrq->cmd->resp[3] = mci_readl(host, REG_RESP0);
-+ } else {
-+ mrq->cmd->resp[0] = mci_readl(host, REG_RESP0);
-+ }
-+ if (mrq->data)
-+ mrq->data->bytes_xfered =
-+ mrq->data->blocks * mrq->data->blksz;
-+ }
-+
-+ if (mrq->data) {
-+ struct mmc_data *data = mrq->data;
-+ u32 temp;
-+
-+ mci_writel(host, REG_IDST, 0x337);
-+ mci_writel(host, REG_DMAC, 0);
-+ temp = mci_readl(host, REG_GCTRL);
-+ mci_writel(host, REG_GCTRL, temp|SDXC_DMA_RESET);
-+ temp &= ~SDXC_DMA_ENABLE_BIT;
-+ mci_writel(host, REG_GCTRL, temp);
-+ temp |= SDXC_FIFO_RESET;
-+ mci_writel(host, REG_GCTRL, temp);
-+ dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
-+ sunxi_mmc_get_dma_dir(data));
-+ }
-+
-+ mci_writel(host, REG_RINTR, 0xffff);
-+
-+ dev_dbg(mmc_dev(host->mmc), "req done, resp %08x %08x %08x %08x\n",
-+ mrq->cmd->resp[0], mrq->cmd->resp[1],
-+ mrq->cmd->resp[2], mrq->cmd->resp[3]);
-+
-+ host->mrq = NULL;
-+ host->int_sum = 0;
-+ host->wait_dma = 0;
-+
-+ spin_unlock_irqrestore(&host->lock, iflags);
-+
-+ if (mrq->data && mrq->data->error) {
-+ dev_err(mmc_dev(host->mmc),
-+ "data error, sending stop command\n");
-+ sunxi_mmc_send_manual_stop(host, mrq);
-+ }
-+
-+ mmc_request_done(host->mmc, mrq);
-+}
-+
-+static irqreturn_t sunxi_mmc_irq(int irq, void *dev_id)
-+{
-+ struct sunxi_mmc_host *host = dev_id;
-+ u32 finalize = 0;
-+ u32 sdio_int = 0;
-+ u32 msk_int;
-+ u32 idma_int;
-+
-+ spin_lock(&host->lock);
-+
-+ idma_int = mci_readl(host, REG_IDST);
-+ msk_int = mci_readl(host, REG_MISTA);
-+
-+ dev_dbg(mmc_dev(host->mmc), "irq: rq %p mi %08x idi %08x\n",
-+ host->mrq, msk_int, idma_int);
-+
-+ if (host->mrq) {
-+ if (idma_int & SDXC_IDMAC_RECEIVE_INTERRUPT)
-+ host->wait_dma = 0;
-+
-+ host->int_sum |= msk_int;
-+
-+ /* Wait for COMMAND_DONE on RESPONSE_TIMEOUT before finishing the req */
-+ if ((host->int_sum & SDXC_RESP_TIMEOUT) &&
-+ !(host->int_sum & SDXC_COMMAND_DONE))
-+ mci_writel(host, REG_IMASK,
-+ host->sdio_imask | SDXC_COMMAND_DONE);
-+ else if (host->int_sum & SDXC_INTERRUPT_ERROR_BIT)
-+ finalize = 1; /* Don't wait for dma on error */
-+ else if (host->int_sum & SDXC_INTERRUPT_DONE_BIT && !host->wait_dma)
-+ finalize = 1; /* Done */
-+
-+ if (finalize) {
-+ mci_writel(host, REG_IMASK, host->sdio_imask);
-+ mci_writel(host, REG_IDIE, 0);
-+ }
-+ }
-+
-+ if (msk_int & SDXC_SDIO_INTERRUPT)
-+ sdio_int = 1;
-+
-+ mci_writel(host, REG_RINTR, msk_int);
-+ mci_writel(host, REG_IDST, idma_int);
-+
-+ spin_unlock(&host->lock);
-+
-+ if (finalize)
-+ tasklet_schedule(&host->tasklet);
-+
-+ if (sdio_int)
-+ mmc_signal_sdio_irq(host->mmc);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static void sunxi_mmc_tasklet(unsigned long data)
-+{
-+ struct sunxi_mmc_host *smc_host = (struct sunxi_mmc_host *) data;
-+ sunxi_mmc_finalize_request(smc_host);
-+}
-+
-+static void sunxi_mmc_oclk_onoff(struct sunxi_mmc_host *host, u32 oclk_en)
-+{
-+ unsigned long expire = jiffies + msecs_to_jiffies(2000);
-+ u32 rval;
-+
-+ rval = mci_readl(host, REG_CLKCR);
-+ rval &= ~(SDXC_CARD_CLOCK_ON | SDXC_LOW_POWER_ON);
-+
-+ if (oclk_en)
-+ rval |= SDXC_CARD_CLOCK_ON;
-+
-+ mci_writel(host, REG_CLKCR, rval);
-+
-+ rval = SDXC_START | SDXC_UPCLK_ONLY | SDXC_WAIT_PRE_OVER;
-+ if (host->voltage_switching)
-+ rval |= SDXC_VOLTAGE_SWITCH;
-+ mci_writel(host, REG_CMDR, rval);
-+
-+ do {
-+ rval = mci_readl(host, REG_CMDR);
-+ } while (time_before(jiffies, expire) && (rval & SDXC_START));
-+
-+ if (rval & SDXC_START) {
-+ dev_err(mmc_dev(host->mmc), "fatal err update clk timeout\n");
-+ host->ferror = 1;
-+ }
-+}
-+
-+struct sunxi_mmc_clk_dly mmc_clk_dly[MMC_CLK_MOD_NUM] = {
-+ { MMC_CLK_400K, 0, 7 },
-+ { MMC_CLK_25M, 0, 5 },
-+ { MMC_CLK_50M, 3, 5 },
-+ { MMC_CLK_50MDDR, 2, 4 },
-+ { MMC_CLK_50MDDR_8BIT, 2, 4 },
-+ { MMC_CLK_100M, 1, 4 },
-+ { MMC_CLK_200M, 1, 4 },
-+};
-+
-+static void sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *smc_host,
-+ unsigned int rate)
-+{
-+ u32 newrate;
-+ u32 src_clk;
-+ u32 oclk_dly;
-+ u32 sclk_dly;
-+ u32 temp;
-+ struct sunxi_mmc_clk_dly *dly = NULL;
-+ struct clk_hw *hw = __clk_get_hw(smc_host->clk_mod);
-+
-+ newrate = clk_round_rate(smc_host->clk_mod, rate);
-+ if (smc_host->clk_mod_rate == newrate) {
-+ dev_dbg(mmc_dev(smc_host->mmc), "clk already %d, rounded %d\n",
-+ rate, newrate);
-+ return;
-+ }
-+
-+ dev_dbg(mmc_dev(smc_host->mmc), "setting clk to %d, rounded %d\n",
-+ rate, newrate);
-+
-+ /* setting clock rate */
-+ clk_disable(smc_host->clk_mod);
-+ clk_set_rate(smc_host->clk_mod, newrate);
-+ clk_enable(smc_host->clk_mod);
-+ smc_host->clk_mod_rate = newrate = clk_get_rate(smc_host->clk_mod);
-+ dev_dbg(mmc_dev(smc_host->mmc), "clk is now %d\n", newrate);
-+
-+ sunxi_mmc_oclk_onoff(smc_host, 0);
-+ /* clear internal divider */
-+ temp = mci_readl(smc_host, REG_CLKCR);
-+ temp &= ~0xff;
-+ mci_writel(smc_host, REG_CLKCR, temp);
-+
-+ /* determine delays */
-+ if (rate <= 400000) {
-+ dly = &mmc_clk_dly[MMC_CLK_400K];
-+ } else if (rate <= 25000000) {
-+ dly = &mmc_clk_dly[MMC_CLK_25M];
-+ } else if (rate <= 50000000) {
-+ if (smc_host->ddr) {
-+ if (smc_host->bus_width == 8)
-+ dly = &mmc_clk_dly[MMC_CLK_50MDDR_8BIT];
-+ else
-+ dly = &mmc_clk_dly[MMC_CLK_50MDDR];
-+ } else {
-+ dly = &mmc_clk_dly[MMC_CLK_50M];
-+ }
-+ } else if (rate <= 104000000) {
-+ dly = &mmc_clk_dly[MMC_CLK_100M];
-+ } else if (rate <= 208000000) {
-+ dly = &mmc_clk_dly[MMC_CLK_200M];
-+ } else {
-+ dly = &mmc_clk_dly[MMC_CLK_50M];
-+ }
-+
-+ oclk_dly = dly->oclk_dly;
-+ sclk_dly = dly->sclk_dly;
-+
-+ src_clk = clk_get_rate(clk_get_parent(smc_host->clk_mod));
-+
-+ if (src_clk >= 300000000 && src_clk <= 400000000) {
-+ if (oclk_dly)
-+ oclk_dly--;
-+ if (sclk_dly)
-+ sclk_dly--;
-+ }
-+
-+ clk_sunxi_mmc_phase_control(hw, sclk_dly, oclk_dly);
-+ sunxi_mmc_oclk_onoff(smc_host, 1);
-+
-+ /* oclk_onoff sets various irq status bits, clear these */
-+ mci_writel(smc_host, REG_RINTR,
-+ mci_readl(smc_host, REG_RINTR) & ~SDXC_SDIO_INTERRUPT);
-+}
-+
-+static void sunxi_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-+{
-+ struct sunxi_mmc_host *host = mmc_priv(mmc);
-+ u32 temp;
-+ s32 err;
-+
-+ /* Set the power state */
-+ switch (ios->power_mode) {
-+ case MMC_POWER_ON:
-+ break;
-+
-+ case MMC_POWER_UP:
-+ if (!IS_ERR(host->vmmc)) {
-+ mmc_regulator_set_ocr(host->mmc, host->vmmc, ios->vdd);
-+ udelay(200);
-+ }
-+
-+ err = sunxi_mmc_init_host(mmc);
-+ if (err) {
-+ host->ferror = 1;
-+ return;
-+ }
-+ enable_irq(host->irq);
-+
-+ dev_dbg(mmc_dev(host->mmc), "power on!\n");
-+ host->ferror = 0;
-+ break;
-+
-+ case MMC_POWER_OFF:
-+ dev_dbg(mmc_dev(host->mmc), "power off!\n");
-+ disable_irq(host->irq);
-+ sunxi_mmc_exit_host(host);
-+ if (!IS_ERR(host->vmmc))
-+ mmc_regulator_set_ocr(host->mmc, host->vmmc, 0);
-+ host->ferror = 0;
-+ break;
-+ }
-+
-+ /* set bus width */
-+ switch (ios->bus_width) {
-+ case MMC_BUS_WIDTH_1:
-+ mci_writel(host, REG_WIDTH, SDXC_WIDTH1);
-+ host->bus_width = 1;
-+ break;
-+ case MMC_BUS_WIDTH_4:
-+ mci_writel(host, REG_WIDTH, SDXC_WIDTH4);
-+ host->bus_width = 4;
-+ break;
-+ case MMC_BUS_WIDTH_8:
-+ mci_writel(host, REG_WIDTH, SDXC_WIDTH8);
-+ host->bus_width = 8;
-+ break;
-+ }
-+
-+ /* set ddr mode */
-+ temp = mci_readl(host, REG_GCTRL);
-+ if (ios->timing == MMC_TIMING_UHS_DDR50) {
-+ temp |= SDXC_DDR_MODE;
-+ host->ddr = 1;
-+ } else {
-+ temp &= ~SDXC_DDR_MODE;
-+ host->ddr = 0;
-+ }
-+ mci_writel(host, REG_GCTRL, temp);
-+
-+ /* set up clock */
-+ if (ios->clock && ios->power_mode) {
-+ dev_dbg(mmc_dev(host->mmc), "ios->clock: %d\n", ios->clock);
-+ sunxi_mmc_clk_set_rate(host, ios->clock);
-+ usleep_range(50000, 55000);
-+ }
-+}
-+
-+static void sunxi_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
-+{
-+ struct sunxi_mmc_host *smc_host = mmc_priv(mmc);
-+ unsigned long flags;
-+ u32 imask;
-+
-+ spin_lock_irqsave(&smc_host->lock, flags);
-+
-+ imask = mci_readl(smc_host, REG_IMASK);
-+ if (enable) {
-+ smc_host->sdio_imask = SDXC_SDIO_INTERRUPT;
-+ imask |= SDXC_SDIO_INTERRUPT;
-+ } else {
-+ smc_host->sdio_imask = 0;
-+ imask &= ~SDXC_SDIO_INTERRUPT;
-+ }
-+ mci_writel(smc_host, REG_IMASK, imask);
-+ spin_unlock_irqrestore(&smc_host->lock, flags);
-+}
-+
-+static void sunxi_mmc_hw_reset(struct mmc_host *mmc)
-+{
-+ struct sunxi_mmc_host *smc_host = mmc_priv(mmc);
-+ mci_writel(smc_host, REG_HWRST, 0);
-+ udelay(10);
-+ mci_writel(smc_host, REG_HWRST, 1);
-+ udelay(300);
-+}
-+
-+static void sunxi_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
-+{
-+ struct sunxi_mmc_host *host = mmc_priv(mmc);
-+ struct mmc_command *cmd = mrq->cmd;
-+ struct mmc_data *data = mrq->data;
-+ unsigned long iflags;
-+ u32 imask = SDXC_INTERRUPT_ERROR_BIT;
-+ u32 cmd_val = SDXC_START | (cmd->opcode & 0x3f);
-+ u32 byte_cnt = 0;
-+ int ret;
-+
-+ if (!mmc_gpio_get_cd(mmc) || host->ferror) {
-+ dev_dbg(mmc_dev(host->mmc), "no medium present\n");
-+ mrq->cmd->error = -ENOMEDIUM;
-+ mmc_request_done(mmc, mrq);
-+ return;
-+ }
-+
-+ if (data) {
-+ byte_cnt = data->blksz * data->blocks;
-+ mci_writel(host, REG_BLKSZ, data->blksz);
-+ mci_writel(host, REG_BCNTR, byte_cnt);
-+ ret = sunxi_mmc_prepare_dma(host, data);
-+ if (ret < 0) {
-+ dev_err(mmc_dev(host->mmc), "prepare DMA failed\n");
-+ cmd->error = ret;
-+ cmd->data->error = ret;
-+ mmc_request_done(host->mmc, mrq);
-+ return;
-+ }
-+ }
-+
-+ if (cmd->opcode == MMC_GO_IDLE_STATE) {
-+ cmd_val |= SDXC_SEND_INIT_SEQUENCE;
-+ imask |= SDXC_COMMAND_DONE;
-+ }
-+
-+ if (cmd->opcode == SD_SWITCH_VOLTAGE) {
-+ cmd_val |= SDXC_VOLTAGE_SWITCH;
-+ imask |= SDXC_VOLTAGE_CHANGE_DONE;
-+ host->voltage_switching = 1;
-+ sunxi_mmc_oclk_onoff(host, 1);
-+ }
-+
-+ if (cmd->flags & MMC_RSP_PRESENT) {
-+ cmd_val |= SDXC_RESP_EXPIRE;
-+ if (cmd->flags & MMC_RSP_136)
-+ cmd_val |= SDXC_LONG_RESPONSE;
-+ if (cmd->flags & MMC_RSP_CRC)
-+ cmd_val |= SDXC_CHECK_RESPONSE_CRC;
-+
-+ if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC) {
-+ cmd_val |= SDXC_DATA_EXPIRE | SDXC_WAIT_PRE_OVER;
-+ if (cmd->data->flags & MMC_DATA_STREAM) {
-+ imask |= SDXC_AUTO_COMMAND_DONE;
-+ cmd_val |= SDXC_SEQUENCE_MODE | SDXC_SEND_AUTO_STOP;
-+ }
-+ if (cmd->data->stop) {
-+ imask |= SDXC_AUTO_COMMAND_DONE;
-+ cmd_val |= SDXC_SEND_AUTO_STOP;
-+ } else
-+ imask |= SDXC_DATA_OVER;
-+
-+ if (cmd->data->flags & MMC_DATA_WRITE)
-+ cmd_val |= SDXC_WRITE;
-+ else
-+ host->wait_dma = 1;
-+ } else
-+ imask |= SDXC_COMMAND_DONE;
-+ } else
-+ imask |= SDXC_COMMAND_DONE;
-+
-+ dev_dbg(mmc_dev(host->mmc), "cmd %d(%08x) arg %x ie 0x%08x len %d\n",
-+ cmd_val & 0x3f, cmd_val, cmd->arg, imask,
-+ mrq->data ? mrq->data->blksz * mrq->data->blocks : 0);
-+
-+ spin_lock_irqsave(&host->lock, iflags);
-+ host->mrq = mrq;
-+ mci_writel(host, REG_IMASK, host->sdio_imask | imask);
-+ spin_unlock_irqrestore(&host->lock, iflags);
-+
-+ mci_writel(host, REG_CARG, cmd->arg);
-+ mci_writel(host, REG_CMDR, cmd_val);
-+}
-+
-+static const struct of_device_id sunxi_mmc_of_match[] = {
-+ { .compatible = "allwinner,sun4i-a10-mmc", },
-+ { .compatible = "allwinner,sun5i-a13-mmc", },
-+ { /* sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, sunxi_mmc_of_match);
-+
-+static struct mmc_host_ops sunxi_mmc_ops = {
-+ .request = sunxi_mmc_request,
-+ .set_ios = sunxi_mmc_set_ios,
-+ .get_ro = mmc_gpio_get_ro,
-+ .get_cd = mmc_gpio_get_cd,
-+ .enable_sdio_irq = sunxi_mmc_enable_sdio_irq,
-+ .hw_reset = sunxi_mmc_hw_reset,
-+};
-+
-+static int sunxi_mmc_resource_request(struct sunxi_mmc_host *host,
-+ struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ int ret;
-+
-+ if (of_device_is_compatible(np, "allwinner,sun4i-a10-mmc"))
-+ host->idma_des_size_bits = 13;
-+ else
-+ host->idma_des_size_bits = 16;
-+
-+ host->vmmc = devm_regulator_get_optional(&pdev->dev, "vmmc");
-+ if (IS_ERR(host->vmmc) && PTR_ERR(host->vmmc) == -EPROBE_DEFER)
-+ return -EPROBE_DEFER;
-+
-+ host->reg_base = devm_ioremap_resource(&pdev->dev,
-+ platform_get_resource(pdev, IORESOURCE_MEM, 0));
-+ if (IS_ERR(host->reg_base))
-+ return PTR_ERR(host->reg_base);
-+
-+ host->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
-+ if (IS_ERR(host->clk_ahb)) {
-+ dev_err(&pdev->dev, "Could not get ahb clock\n");
-+ return PTR_ERR(host->clk_ahb);
-+ }
-+
-+ host->clk_mod = devm_clk_get(&pdev->dev, "mod");
-+ if (IS_ERR(host->clk_mod)) {
-+ dev_err(&pdev->dev, "Could not get mod clock\n");
-+ return PTR_ERR(host->clk_mod);
-+ }
-+
-+ /* Make sure the controller is in a sane state before enabling irqs */
-+ ret = sunxi_mmc_init_host(host->mmc);
-+ if (ret)
-+ return ret;
-+
-+ host->irq = platform_get_irq(pdev, 0);
-+ ret = devm_request_irq(&pdev->dev, host->irq, sunxi_mmc_irq, 0,
-+ "sunxi-mmc", host);
-+ if (ret == 0)
-+ disable_irq(host->irq);
-+
-+ /* And put it back in reset */
-+ sunxi_mmc_exit_host(host);
-+
-+ return ret;
-+}
-+
-+static int sunxi_mmc_probe(struct platform_device *pdev)
-+{
-+ struct sunxi_mmc_host *host;
-+ struct mmc_host *mmc;
-+ int ret;
-+
-+ mmc = mmc_alloc_host(sizeof(struct sunxi_mmc_host), &pdev->dev);
-+ if (!mmc) {
-+ dev_err(&pdev->dev, "mmc alloc host failed\n");
-+ return -ENOMEM;
-+ }
-+
-+ host = mmc_priv(mmc);
-+ host->mmc = mmc;
-+ spin_lock_init(&host->lock);
-+ tasklet_init(&host->tasklet, sunxi_mmc_tasklet, (unsigned long)host);
-+
-+ ret = sunxi_mmc_resource_request(host, pdev);
-+ if (ret)
-+ goto error_free_host;
-+
-+ host->sg_cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE,
-+ &host->sg_dma, GFP_KERNEL);
-+ if (!host->sg_cpu) {
-+ dev_err(&pdev->dev, "Failed to allocate DMA descriptor mem\n");
-+ ret = -ENOMEM;
-+ goto error_free_host;
-+ }
-+
-+ mmc->ops = &sunxi_mmc_ops;
-+ mmc->max_blk_count = 8192;
-+ mmc->max_blk_size = 4096;
-+ mmc->max_segs = PAGE_SIZE / sizeof(struct sunxi_idma_des);
-+ mmc->max_seg_size = (1 << host->idma_des_size_bits);
-+ mmc->max_req_size = mmc->max_seg_size * mmc->max_segs;
-+ /* 400kHz ~ 50MHz */
-+ mmc->f_min = 400000;
-+ mmc->f_max = 50000000;
-+ /* available voltages */
-+ if (!IS_ERR(host->vmmc))
-+ mmc->ocr_avail = mmc_regulator_get_ocrmask(host->vmmc);
-+ else
-+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
-+
-+ mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
-+ MMC_CAP_SDIO_IRQ;
-+ mmc->caps2 |= MMC_CAP2_NO_PRESCAN_POWERUP;
-+
-+ ret = mmc_of_parse(mmc);
-+ if (ret)
-+ goto error_free_dma;
-+
-+ ret = mmc_add_host(mmc);
-+ if (ret)
-+ goto error_free_dma;
-+
-+ dev_info(&pdev->dev, "base:0x%p irq:%u\n", host->reg_base, host->irq);
-+ platform_set_drvdata(pdev, mmc);
-+ return 0;
-+
-+error_free_dma:
-+ dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
-+error_free_host:
-+ mmc_free_host(mmc);
-+ return ret;
-+}
-+
-+static int sunxi_mmc_remove(struct platform_device *pdev)
-+{
-+ struct mmc_host *mmc = platform_get_drvdata(pdev);
-+ struct sunxi_mmc_host *host = mmc_priv(mmc);
-+
-+ mmc_remove_host(mmc);
-+ sunxi_mmc_exit_host(host);
-+ tasklet_disable(&host->tasklet);
-+ dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
-+ mmc_free_host(mmc);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver sunxi_mmc_driver = {
-+ .driver = {
-+ .name = "sunxi-mmc",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(sunxi_mmc_of_match),
-+ },
-+ .probe = sunxi_mmc_probe,
-+ .remove = sunxi_mmc_remove,
-+};
-+module_platform_driver(sunxi_mmc_driver);
-+
-+MODULE_DESCRIPTION("Allwinner's SD/MMC Card Controller Driver");
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("David Lanzendörfer <david.lanzendoerfer@o2s.ch>");
-+MODULE_ALIAS("platform:sunxi-mmc");
---- /dev/null
-+++ b/drivers/mmc/host/sunxi-mmc.h
-@@ -0,0 +1,238 @@
-+/*
-+ * Driver for sunxi SD/MMC host controllers
-+ * (C) Copyright 2007-2011 Reuuimlla Technology Co., Ltd.
-+ * (C) Copyright 2007-2011 Aaron Maoye <leafy.myeh@reuuimllatech.com>
-+ * (C) Copyright 2013-2014 O2S GmbH <www.o2s.ch>
-+ * (C) Copyright 2013-2014 David Lanzendörfer <david.lanzendoerfer@o2s.ch>
-+ * (C) Copyright 2013-2014 Hans de Goede <hdegoede@redhat.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ */
-+
-+#ifndef __SUNXI_MMC_H__
-+#define __SUNXI_MMC_H__
-+
-+/* register offset definitions */
-+#define SDXC_REG_GCTRL (0x00) /* SMC Global Control Register */
-+#define SDXC_REG_CLKCR (0x04) /* SMC Clock Control Register */
-+#define SDXC_REG_TMOUT (0x08) /* SMC Time Out Register */
-+#define SDXC_REG_WIDTH (0x0C) /* SMC Bus Width Register */
-+#define SDXC_REG_BLKSZ (0x10) /* SMC Block Size Register */
-+#define SDXC_REG_BCNTR (0x14) /* SMC Byte Count Register */
-+#define SDXC_REG_CMDR (0x18) /* SMC Command Register */
-+#define SDXC_REG_CARG (0x1C) /* SMC Argument Register */
-+#define SDXC_REG_RESP0 (0x20) /* SMC Response Register 0 */
-+#define SDXC_REG_RESP1 (0x24) /* SMC Response Register 1 */
-+#define SDXC_REG_RESP2 (0x28) /* SMC Response Register 2 */
-+#define SDXC_REG_RESP3 (0x2C) /* SMC Response Register 3 */
-+#define SDXC_REG_IMASK (0x30) /* SMC Interrupt Mask Register */
-+#define SDXC_REG_MISTA (0x34) /* SMC Masked Interrupt Status Register */
-+#define SDXC_REG_RINTR (0x38) /* SMC Raw Interrupt Status Register */
-+#define SDXC_REG_STAS (0x3C) /* SMC Status Register */
-+#define SDXC_REG_FTRGL (0x40) /* SMC FIFO Threshold Watermark Registe */
-+#define SDXC_REG_FUNS (0x44) /* SMC Function Select Register */
-+#define SDXC_REG_CBCR (0x48) /* SMC CIU Byte Count Register */
-+#define SDXC_REG_BBCR (0x4C) /* SMC BIU Byte Count Register */
-+#define SDXC_REG_DBGC (0x50) /* SMC Debug Enable Register */
-+#define SDXC_REG_HWRST (0x78) /* SMC Card Hardware Reset for Register */
-+#define SDXC_REG_DMAC (0x80) /* SMC IDMAC Control Register */
-+#define SDXC_REG_DLBA (0x84) /* SMC IDMAC Descriptor List Base Addre */
-+#define SDXC_REG_IDST (0x88) /* SMC IDMAC Status Register */
-+#define SDXC_REG_IDIE (0x8C) /* SMC IDMAC Interrupt Enable Register */
-+#define SDXC_REG_CHDA (0x90)
-+#define SDXC_REG_CBDA (0x94)
-+
-+#define mci_readl(host, reg) \
-+ readl((host)->reg_base + SDXC_##reg)
-+#define mci_writel(host, reg, value) \
-+ writel((value), (host)->reg_base + SDXC_##reg)
-+
-+/* global control register bits */
-+#define SDXC_SOFT_RESET BIT(0)
-+#define SDXC_FIFO_RESET BIT(1)
-+#define SDXC_DMA_RESET BIT(2)
-+#define SDXC_HARDWARE_RESET (SDXC_SOFT_RESET|SDXC_FIFO_RESET|SDXC_DMA_RESET)
-+#define SDXC_INTERRUPT_ENABLE_BIT BIT(4)
-+#define SDXC_DMA_ENABLE_BIT BIT(5)
-+#define SDXC_DEBOUNCE_ENABLE_BIT BIT(8)
-+#define SDXC_POSEDGE_LATCH_DATA BIT(9)
-+#define SDXC_DDR_MODE BIT(10)
-+#define SDXC_MEMORY_ACCESS_DONE BIT(29)
-+#define SDXC_ACCESS_DONE_DIRECT BIT(30)
-+#define SDXC_ACCESS_BY_AHB BIT(31)
-+#define SDXC_ACCESS_BY_DMA (0U << 31)
-+/* clock control bits */
-+#define SDXC_CARD_CLOCK_ON BIT(16)
-+#define SDXC_LOW_POWER_ON BIT(17)
-+/* bus width */
-+#define SDXC_WIDTH1 (0)
-+#define SDXC_WIDTH4 (1)
-+#define SDXC_WIDTH8 (2)
-+/* smc command bits */
-+#define SDXC_RESP_EXPIRE BIT(6)
-+#define SDXC_LONG_RESPONSE BIT(7)
-+#define SDXC_CHECK_RESPONSE_CRC BIT(8)
-+#define SDXC_DATA_EXPIRE BIT(9)
-+#define SDXC_WRITE BIT(10)
-+#define SDXC_SEQUENCE_MODE BIT(11)
-+#define SDXC_SEND_AUTO_STOP BIT(12)
-+#define SDXC_WAIT_PRE_OVER BIT(13)
-+#define SDXC_STOP_ABORT_CMD BIT(14)
-+#define SDXC_SEND_INIT_SEQUENCE BIT(15)
-+#define SDXC_UPCLK_ONLY BIT(21)
-+#define SDXC_READ_CEATA_DEV BIT(22)
-+#define SDXC_CCS_EXPIRE BIT(23)
-+#define SDXC_ENABLE_BIT_BOOT BIT(24)
-+#define SDXC_ALT_BOOT_OPTIONS BIT(25)
-+#define SDXC_BOOT_ACK_EXPIRE BIT(26)
-+#define SDXC_BOOT_ABORT BIT(27)
-+#define SDXC_VOLTAGE_SWITCH BIT(28)
-+#define SDXC_USE_HOLD_REGISTER BIT(29)
-+#define SDXC_START BIT(31)
-+/* interrupt bits */
-+#define SDXC_RESP_ERROR BIT(1)
-+#define SDXC_COMMAND_DONE BIT(2)
-+#define SDXC_DATA_OVER BIT(3)
-+#define SDXC_TX_DATA_REQUEST BIT(4)
-+#define SDXC_RX_DATA_REQUEST BIT(5)
-+#define SDXC_RESP_CRC_ERROR BIT(6)
-+#define SDXC_DATA_CRC_ERROR BIT(7)
-+#define SDXC_RESP_TIMEOUT BIT(8)
-+#define SDXC_DATA_TIMEOUT BIT(9)
-+#define SDXC_VOLTAGE_CHANGE_DONE BIT(10)
-+#define SDXC_FIFO_RUN_ERROR BIT(11)
-+#define SDXC_HARD_WARE_LOCKED BIT(12)
-+#define SDXC_START_BIT_ERROR BIT(13)
-+#define SDXC_AUTO_COMMAND_DONE BIT(14)
-+#define SDXC_END_BIT_ERROR BIT(15)
-+#define SDXC_SDIO_INTERRUPT BIT(16)
-+#define SDXC_CARD_INSERT BIT(30)
-+#define SDXC_CARD_REMOVE BIT(31)
-+#define SDXC_INTERRUPT_ERROR_BIT (SDXC_RESP_ERROR | SDXC_RESP_CRC_ERROR | \
-+ SDXC_DATA_CRC_ERROR | SDXC_RESP_TIMEOUT | \
-+ SDXC_DATA_TIMEOUT | SDXC_FIFO_RUN_ERROR | \
-+ SDXC_HARD_WARE_LOCKED | SDXC_START_BIT_ERROR | \
-+ SDXC_END_BIT_ERROR) /* 0xbbc2 */
-+#define SDXC_INTERRUPT_DONE_BIT (SDXC_AUTO_COMMAND_DONE | SDXC_DATA_OVER | \
-+ SDXC_COMMAND_DONE | SDXC_VOLTAGE_CHANGE_DONE)
-+/* status */
-+#define SDXC_RXWL_FLAG BIT(0)
-+#define SDXC_TXWL_FLAG BIT(1)
-+#define SDXC_FIFO_EMPTY BIT(2)
-+#define SDXC_FIFO_FULL BIT(3)
-+#define SDXC_CARD_PRESENT BIT(8)
-+#define SDXC_CARD_DATA_BUSY BIT(9)
-+#define SDXC_DATA_FSM_BUSY BIT(10)
-+#define SDXC_DMA_REQUEST BIT(31)
-+#define SDXC_FIFO_SIZE (16)
-+/* Function select */
-+#define SDXC_CEATA_ON (0xceaaU << 16)
-+#define SDXC_SEND_IRQ_RESPONSE BIT(0)
-+#define SDXC_SDIO_READ_WAIT BIT(1)
-+#define SDXC_ABORT_READ_DATA BIT(2)
-+#define SDXC_SEND_CCSD BIT(8)
-+#define SDXC_SEND_AUTO_STOPCCSD BIT(9)
-+#define SDXC_CEATA_DEV_INTERRUPT_ENABLE_BIT BIT(10)
-+/* IDMA controller bus mod bit field */
-+#define SDXC_IDMAC_SOFT_RESET BIT(0)
-+#define SDXC_IDMAC_FIX_BURST BIT(1)
-+#define SDXC_IDMAC_IDMA_ON BIT(7)
-+#define SDXC_IDMAC_REFETCH_DES BIT(31)
-+/* IDMA status bit field */
-+#define SDXC_IDMAC_TRANSMIT_INTERRUPT BIT(0)
-+#define SDXC_IDMAC_RECEIVE_INTERRUPT BIT(1)
-+#define SDXC_IDMAC_FATAL_BUS_ERROR BIT(2)
-+#define SDXC_IDMAC_DESTINATION_INVALID BIT(4)
-+#define SDXC_IDMAC_CARD_ERROR_SUM BIT(5)
-+#define SDXC_IDMAC_NORMAL_INTERRUPT_SUM BIT(8)
-+#define SDXC_IDMAC_ABNORMAL_INTERRUPT_SUM BIT(9)
-+#define SDXC_IDMAC_HOST_ABORT_INTERRUPT_TX BIT(10)
-+#define SDXC_IDMAC_HOST_ABORT_INTERRUPT_RX BIT(10)
-+#define SDXC_IDMAC_IDLE (0U << 13)
-+#define SDXC_IDMAC_SUSPEND (1U << 13)
-+#define SDXC_IDMAC_DESC_READ (2U << 13)
-+#define SDXC_IDMAC_DESC_CHECK (3U << 13)
-+#define SDXC_IDMAC_READ_REQUEST_WAIT (4U << 13)
-+#define SDXC_IDMAC_WRITE_REQUEST_WAIT (5U << 13)
-+#define SDXC_IDMAC_READ (6U << 13)
-+#define SDXC_IDMAC_WRITE (7U << 13)
-+#define SDXC_IDMAC_DESC_CLOSE (8U << 13)
-+
-+/*
-+* If the idma-des-size-bits of property is ie 13, bufsize bits are:
-+* Bits 0-12: buf1 size
-+* Bits 13-25: buf2 size
-+* Bits 26-31: not used
-+* Since we only ever set buf1 size, we can simply store it directly.
-+*/
-+#define SDXC_IDMAC_DES0_DIC BIT(1) /* disable interrupt on completion */
-+#define SDXC_IDMAC_DES0_LD BIT(2) /* last descriptor */
-+#define SDXC_IDMAC_DES0_FD BIT(3) /* first descriptor */
-+#define SDXC_IDMAC_DES0_CH BIT(4) /* chain mode */
-+#define SDXC_IDMAC_DES0_ER BIT(5) /* end of ring */
-+#define SDXC_IDMAC_DES0_CES BIT(30) /* card error summary */
-+#define SDXC_IDMAC_DES0_OWN BIT(31) /* 1-idma owns it, 0-host owns it */
-+
-+struct sunxi_idma_des {
-+ u32 config;
-+ u32 buf_size;
-+ u32 buf_addr_ptr1;
-+ u32 buf_addr_ptr2;
-+};
-+
-+struct sunxi_mmc_host {
-+ struct mmc_host *mmc;
-+ struct regulator *vmmc;
-+
-+ /* IO mapping base */
-+ void __iomem *reg_base;
-+
-+ spinlock_t lock;
-+ struct tasklet_struct tasklet;
-+
-+ /* clock management */
-+ struct clk *clk_ahb;
-+ struct clk *clk_mod;
-+
-+ /* ios information */
-+ u32 clk_mod_rate;
-+ u32 bus_width;
-+ u32 idma_des_size_bits;
-+ u32 ddr;
-+ u32 voltage_switching;
-+
-+ /* irq */
-+ int irq;
-+ u32 int_sum;
-+ u32 sdio_imask;
-+
-+ /* flags */
-+ u32 power_on:1;
-+ u32 wait_dma:1;
-+
-+ dma_addr_t sg_dma;
-+ void *sg_cpu;
-+
-+ struct mmc_request *mrq;
-+ u32 ferror;
-+};
-+
-+#define MMC_CLK_400K 0
-+#define MMC_CLK_25M 1
-+#define MMC_CLK_50M 2
-+#define MMC_CLK_50MDDR 3
-+#define MMC_CLK_50MDDR_8BIT 4
-+#define MMC_CLK_100M 5
-+#define MMC_CLK_200M 6
-+#define MMC_CLK_MOD_NUM 7
-+
-+struct sunxi_mmc_clk_dly {
-+ u32 mode;
-+ u32 oclk_dly;
-+ u32 sclk_dly;
-+};
-+
-+#endif
diff --git a/target/linux/sunxi/patches-3.14/201-dt-sun4i-add-mmc-nodes_NEED_REFRESH.patch b/target/linux/sunxi/patches-3.14/201-dt-sun4i-add-mmc-nodes_NEED_REFRESH.patch
deleted file mode 100644
index 10d4d5823b..0000000000
--- a/target/linux/sunxi/patches-3.14/201-dt-sun4i-add-mmc-nodes_NEED_REFRESH.patch
+++ /dev/null
@@ -1,159 +0,0 @@
-From b66989fe7a41e1093b1f825967ab29963e06cccd Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?David=20Lanzend=C3=B6rfer?= <david.lanzendoerfer@o2s.ch>
-Date: Sat, 15 Feb 2014 14:02:51 +0100
-Subject: [PATCH] ARM: dts: sun4i: Add support for mmc
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun4i-a10-a1000.dts | 8 +++++
- arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 8 +++++
- arch/arm/boot/dts/sun4i-a10.dtsi | 58 ++++++++++++++++++++++++++++++
- 3 files changed, 74 insertions(+)
-
---- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
-+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
-@@ -34,6 +34,14 @@
- };
- };
-
-+ mmc0: mmc@01c0f000 {
-+ pinctrl-names = "default", "default";
-+ pinctrl-0 = <&mmc0_pins_a>;
-+ pinctrl-1 = <&mmc0_cd_pin_reference_design>;
-+ cd-gpios = <&pio 7 1 0>; /* PH1 */
-+ status = "okay";
-+ };
-+
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <&reg_usb1_vbus>;
- usb2_vbus-supply = <&reg_usb2_vbus>;
---- a/arch/arm/boot/dts/sun4i-a10.dtsi
-+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
-@@ -377,6 +377,50 @@
- #size-cells = <0>;
- };
-
-+ mmc0: mmc@01c0f000 {
-+ compatible = "allwinner,sun4i-a10-mmc";
-+ reg = <0x01c0f000 0x1000>;
-+ clocks = <&ahb_gates 8>, <&mmc0_clk>;
-+ clock-names = "ahb", "mod";
-+ interrupts = <32>;
-+ bus-width = <4>;
-+ cd-inverted;
-+ status = "disabled";
-+ };
-+
-+ mmc1: mmc@01c10000 {
-+ compatible = "allwinner,sun4i-a10-mmc";
-+ reg = <0x01c10000 0x1000>;
-+ clocks = <&ahb_gates 9>, <&mmc1_clk>;
-+ clock-names = "ahb", "mod";
-+ interrupts = <33>;
-+ bus-width = <4>;
-+ cd-inverted;
-+ status = "disabled";
-+ };
-+
-+ mmc2: mmc@01c11000 {
-+ compatible = "allwinner,sun4i-a10-mmc";
-+ reg = <0x01c11000 0x1000>;
-+ clocks = <&ahb_gates 10>, <&mmc2_clk>;
-+ clock-names = "ahb", "mod";
-+ interrupts = <34>;
-+ bus-width = <4>;
-+ cd-inverted;
-+ status = "disabled";
-+ };
-+
-+ mmc3: mmc@01c12000 {
-+ compatible = "allwinner,sun4i-a10-mmc";
-+ reg = <0x01c12000 0x1000>;
-+ clocks = <&ahb_gates 11>, <&mmc3_clk>;
-+ clock-names = "ahb", "mod";
-+ interrupts = <35>;
-+ bus-width = <4>;
-+ cd-inverted;
-+ status = "disabled";
-+ };
-+
- usbphy: phy@01c13400 {
- #phy-cells = <1>;
- compatible = "allwinner,sun4i-a10-usb-phy";
-@@ -529,6 +573,20 @@
- allwinner,drive = <0>;
- allwinner,pull = <0>;
- };
-+
-+ mmc0_pins_a: mmc0@0 {
-+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
-+ allwinner,function = "mmc0";
-+ allwinner,drive = <2>;
-+ allwinner,pull = <0>;
-+ };
-+
-+ mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
-+ allwinner,pins = "PH1";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <1>;
-+ };
- };
-
- timer@01c20c00 {
---- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
-+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
-@@ -20,6 +20,14 @@
- compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10";
-
- soc@01c00000 {
-+ mmc0: mmc@01c0f000 {
-+ pinctrl-names = "default", "default";
-+ pinctrl-0 = <&mmc0_pins_a>;
-+ pinctrl-1 = <&mmc0_cd_pin_reference_design>;
-+ cd-gpios = <&pio 7 1 0>; /* PH1 */
-+ status = "okay";
-+ };
-+
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <&reg_usb1_vbus>;
- usb2_vbus-supply = <&reg_usb2_vbus>;
---- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
-+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
-@@ -33,6 +33,15 @@
- };
- };
-
-+ mmc0: mmc@01c0f000 {
-+ pinctrl-names = "default", "default";
-+ pinctrl-0 = <&mmc0_pins_a>;
-+ pinctrl-1 = <&mmc0_cd_pin_reference_design>;
-+ cd-gpios = <&pio 7 1 0>; /* PH1 */
-+ cd-mode = <1>;
-+ status = "okay";
-+ };
-+
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <&reg_usb1_vbus>;
- usb2_vbus-supply = <&reg_usb2_vbus>;
---- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
-+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
-@@ -34,6 +34,14 @@
- };
- };
-
-+ mmc0: mmc@01c0f000 {
-+ pinctrl-names = "default", "default";
-+ pinctrl-0 = <&mmc0_pins_a>;
-+ pinctrl-1 = <&mmc0_cd_pin_reference_design>;
-+ cd-gpios = <&pio 7 1 0>; /* PH1 */
-+ status = "okay";
-+ };
-+
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <&reg_usb1_vbus>;
- usb2_vbus-supply = <&reg_usb2_vbus>;
diff --git a/target/linux/sunxi/patches-3.14/202-dt-sun5i-add-mmc-nodes.patch b/target/linux/sunxi/patches-3.14/202-dt-sun5i-add-mmc-nodes.patch
deleted file mode 100644
index 541cef6852..0000000000
--- a/target/linux/sunxi/patches-3.14/202-dt-sun5i-add-mmc-nodes.patch
+++ /dev/null
@@ -1,125 +0,0 @@
-From 7afa5fb704679e84c59e5ad25bbdf7605844c5ca Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?David=20Lanzend=C3=B6rfer?= <david.lanzendoerfer@o2s.ch>
-Date: Sat, 15 Feb 2014 14:02:29 +0100
-Subject: [PATCH] ARM: dts: sun5i: Add support for mmc
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 30 +++++++++++++++
- arch/arm/boot/dts/sun5i-a10s.dtsi | 47 ++++++++++++++++++++++++
- arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts | 15 ++++++++
- arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 15 ++++++++
- arch/arm/boot/dts/sun5i-a13.dtsi | 29 +++++++++++++++
- 5 files changed, 136 insertions(+)
-
---- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
-+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
-@@ -21,6 +21,14 @@
- compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
-
- soc@01c00000 {
-+ mmc0: mmc@01c0f000 {
-+ pinctrl-names = "default", "default";
-+ pinctrl-0 = <&mmc0_pins_a>;
-+ pinctrl-1 = <&mmc0_cd_pin_olinuxinom>;
-+ cd-gpios = <&pio 6 0 0>; /* PG0 */
-+ status = "okay";
-+ };
-+
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <&reg_usb1_vbus>;
- status = "okay";
-@@ -35,6 +43,13 @@
- };
-
- pinctrl@01c20800 {
-+ mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
-+ allwinner,pins = "PG0";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <1>;
-+ };
-+
- led_pins_olinuxinom: led_pins@0 {
- allwinner,pins = "PG9";
- allwinner,function = "gpio_out";
---- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
-+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
-@@ -21,6 +21,14 @@
- compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13";
-
- soc@01c00000 {
-+ mmc0: mmc@01c0f000 {
-+ pinctrl-names = "default", "default";
-+ pinctrl-0 = <&mmc0_pins_a>;
-+ pinctrl-1 = <&mmc0_cd_pin_olinuxino>;
-+ cd-gpios = <&pio 6 0 0>; /* PG0 */
-+ status = "okay";
-+ };
-+
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <&reg_usb1_vbus>;
- status = "okay";
-@@ -35,6 +43,13 @@
- };
-
- pinctrl@01c20800 {
-+ mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
-+ allwinner,pins = "PG0";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <1>;
-+ };
-+
- led_pins_olinuxino: led_pins@0 {
- allwinner,pins = "PG9";
- allwinner,function = "gpio_out";
---- a/arch/arm/boot/dts/sun5i-a13.dtsi
-+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
-@@ -320,6 +320,28 @@
- #size-cells = <0>;
- };
-
-+ mmc0: mmc@01c0f000 {
-+ compatible = "allwinner,sun5i-a13-mmc";
-+ reg = <0x01c0f000 0x1000>;
-+ clocks = <&ahb_gates 8>, <&mmc0_clk>;
-+ clock-names = "ahb", "mod";
-+ interrupts = <32>;
-+ bus-width = <4>;
-+ cd-inverted;
-+ status = "disabled";
-+ };
-+
-+ mmc2: mmc@01c11000 {
-+ compatible = "allwinner,sun5i-a13-mmc";
-+ reg = <0x01c11000 0x1000>;
-+ clocks = <&ahb_gates 10>, <&mmc2_clk>;
-+ clock-names = "ahb", "mod";
-+ interrupts = <34>;
-+ bus-width = <4>;
-+ cd-inverted;
-+ status = "disabled";
-+ };
-+
- usbphy: phy@01c13400 {
- #phy-cells = <1>;
- compatible = "allwinner,sun5i-a13-usb-phy";
-@@ -415,6 +437,13 @@
- allwinner,drive = <0>;
- allwinner,pull = <0>;
- };
-+
-+ mmc0_pins_a: mmc0@0 {
-+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
-+ allwinner,function = "mmc0";
-+ allwinner,drive = <2>;
-+ allwinner,pull = <0>;
-+ };
- };
-
- timer@01c20c00 {
diff --git a/target/linux/sunxi/patches-3.14/203-dt-sun7i-add-mmc-nodes.patch b/target/linux/sunxi/patches-3.14/203-dt-sun7i-add-mmc-nodes.patch
deleted file mode 100644
index 1a0459cb25..0000000000
--- a/target/linux/sunxi/patches-3.14/203-dt-sun7i-add-mmc-nodes.patch
+++ /dev/null
@@ -1,171 +0,0 @@
-From 33654facee61ebbd88684c9cf482ec2ea41f575e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?David=20Lanzend=C3=B6rfer?= <david.lanzendoerfer@o2s.ch>
-Date: Sat, 15 Feb 2014 14:02:01 +0100
-Subject: [PATCH] ARM: dts: sun7i: Add support for mmc
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 8 +++
- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 8 +++
- arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 23 +++++++++
- arch/arm/boot/dts/sun7i-a20.dtsi | 65 +++++++++++++++++++++++++
- 4 files changed, 104 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
-@@ -20,6 +20,14 @@
- compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
-
- soc@01c00000 {
-+ mmc0: mmc@01c0f000 {
-+ pinctrl-names = "default", "default";
-+ pinctrl-0 = <&mmc0_pins_a>;
-+ pinctrl-1 = <&mmc0_cd_pin_reference_design>;
-+ cd-gpios = <&pio 7 1 0>; /* PH1 */
-+ status = "okay";
-+ };
-+
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <&reg_usb1_vbus>;
- usb2_vbus-supply = <&reg_usb2_vbus>;
---- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-@@ -20,6 +20,14 @@
- compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
-
- soc@01c00000 {
-+ mmc0: mmc@01c0f000 {
-+ pinctrl-names = "default", "default";
-+ pinctrl-0 = <&mmc0_pins_a>;
-+ pinctrl-1 = <&mmc0_cd_pin_reference_design>;
-+ cd-gpios = <&pio 7 1 0>; /* PH1 */
-+ status = "okay";
-+ };
-+
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <&reg_usb1_vbus>;
- usb2_vbus-supply = <&reg_usb2_vbus>;
---- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
-@@ -32,6 +32,22 @@
- status = "okay";
- };
-
-+ mmc0: mmc@01c0f000 {
-+ pinctrl-names = "default", "default";
-+ pinctrl-0 = <&mmc0_pins_a>;
-+ pinctrl-1 = <&mmc0_cd_pin_reference_design>;
-+ cd-gpios = <&pio 7 1 0>; /* PH1 */
-+ status = "okay";
-+ };
-+
-+ mmc3: mmc@01c12000 {
-+ pinctrl-names = "default", "default";
-+ pinctrl-0 = <&mmc3_pins_a>;
-+ pinctrl-1 = <&mmc3_cd_pin_olinuxinom>;
-+ cd-gpios = <&pio 7 11 0>; /* PH11 */
-+ status = "okay";
-+ };
-+
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <&reg_usb1_vbus>;
- usb2_vbus-supply = <&reg_usb2_vbus>;
-@@ -66,6 +82,13 @@
- };
-
- pinctrl@01c20800 {
-+ mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
-+ allwinner,pins = "PH11";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <1>;
-+ };
-+
- led_pins_olinuxino: led_pins@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -439,6 +439,50 @@
- #size-cells = <0>;
- };
-
-+ mmc0: mmc@01c0f000 {
-+ compatible = "allwinner,sun5i-a13-mmc";
-+ reg = <0x01c0f000 0x1000>;
-+ clocks = <&ahb_gates 8>, <&mmc0_clk>;
-+ clock-names = "ahb", "mod";
-+ interrupts = <0 32 4>;
-+ bus-width = <4>;
-+ cd-inverted;
-+ status = "disabled";
-+ };
-+
-+ mmc1: mmc@01c10000 {
-+ compatible = "allwinner,sun5i-a13-mmc";
-+ reg = <0x01c10000 0x1000>;
-+ clocks = <&ahb_gates 9>, <&mmc1_clk>;
-+ clock-names = "ahb", "mod";
-+ interrupts = <0 33 4>;
-+ bus-width = <4>;
-+ cd-inverted;
-+ status = "disabled";
-+ };
-+
-+ mmc2: mmc@01c11000 {
-+ compatible = "allwinner,sun5i-a13-mmc";
-+ reg = <0x01c11000 0x1000>;
-+ clocks = <&ahb_gates 10>, <&mmc2_clk>;
-+ clock-names = "ahb", "mod";
-+ interrupts = <0 34 4>;
-+ bus-width = <4>;
-+ cd-inverted;
-+ status = "disabled";
-+ };
-+
-+ mmc3: mmc@01c12000 {
-+ compatible = "allwinner,sun5i-a13-mmc";
-+ reg = <0x01c12000 0x1000>;
-+ clocks = <&ahb_gates 11>, <&mmc3_clk>;
-+ clock-names = "ahb", "mod";
-+ interrupts = <0 35 4>;
-+ bus-width = <4>;
-+ cd-inverted;
-+ status = "disabled";
-+ };
-+
- usbphy: phy@01c13400 {
- #phy-cells = <1>;
- compatible = "allwinner,sun7i-a20-usb-phy";
-@@ -645,6 +689,27 @@
- allwinner,drive = <0>;
- allwinner,pull = <0>;
- };
-+
-+ mmc0_pins_a: mmc0@0 {
-+ allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
-+ allwinner,function = "mmc0";
-+ allwinner,drive = <2>;
-+ allwinner,pull = <0>;
-+ };
-+
-+ mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
-+ allwinner,pins = "PH1";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <1>;
-+ };
-+
-+ mmc3_pins_a: mmc3@0 {
-+ allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9";
-+ allwinner,function = "mmc3";
-+ allwinner,drive = <2>;
-+ allwinner,pull = <0>;
-+ };
- };
-
- timer@01c20c00 {
diff --git a/target/linux/sunxi/patches-3.14/205-nmi-add-driver.patch b/target/linux/sunxi/patches-3.14/205-nmi-add-driver.patch
deleted file mode 100644
index 98b5fe746a..0000000000
--- a/target/linux/sunxi/patches-3.14/205-nmi-add-driver.patch
+++ /dev/null
@@ -1,239 +0,0 @@
-From b9ad0253e6c68ac3d37fd2ed8ed9bf8a334e4b65 Mon Sep 17 00:00:00 2001
-From: Carlo Caione <carlo@caione.org>
-Date: Sat, 15 Mar 2014 14:40:59 +0100
-Subject: [PATCH] ARM: sun7i/sun6i: irqchip: Add irqchip driver for NMI
- controller
-
-Allwinner A20/A31 SoCs have special registers to control / (un)mask /
-acknowledge NMI. This NMI controller is separated and independent from GIC.
-This patch adds a new irqchip to manage NMI.
-
-Signed-off-by: Carlo Caione <carlo@caione.org>
-Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- drivers/irqchip/Makefile | 1 +
- drivers/irqchip/irq-sunxi-nmi.c | 208 ++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 209 insertions(+)
- create mode 100644 drivers/irqchip/irq-sunxi-nmi.c
-
---- a/drivers/irqchip/Makefile
-+++ b/drivers/irqchip/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_METAG_PERFCOUNTER_IRQS) +=
- obj-$(CONFIG_ARCH_MOXART) += irq-moxart.o
- obj-$(CONFIG_ORION_IRQCHIP) += irq-orion.o
- obj-$(CONFIG_ARCH_SUNXI) += irq-sun4i.o
-+obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi-nmi.o
- obj-$(CONFIG_ARCH_SPEAR3XX) += spear-shirq.o
- obj-$(CONFIG_ARM_GIC) += irq-gic.o
- obj-$(CONFIG_ARM_NVIC) += irq-nvic.o
---- /dev/null
-+++ b/drivers/irqchip/irq-sunxi-nmi.c
-@@ -0,0 +1,208 @@
-+/*
-+ * Allwinner A20/A31 SoCs NMI IRQ chip driver.
-+ *
-+ * Carlo Caione <carlo.caione@gmail.com>
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#include <linux/bitops.h>
-+#include <linux/device.h>
-+#include <linux/io.h>
-+#include <linux/irq.h>
-+#include <linux/interrupt.h>
-+#include <linux/irqdomain.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_address.h>
-+#include <linux/of_platform.h>
-+#include <linux/irqchip/chained_irq.h>
-+#include "irqchip.h"
-+
-+#define SUNXI_NMI_SRC_TYPE_MASK 0x00000003
-+
-+enum {
-+ SUNXI_SRC_TYPE_LEVEL_LOW = 0,
-+ SUNXI_SRC_TYPE_EDGE_FALLING,
-+ SUNXI_SRC_TYPE_LEVEL_HIGH,
-+ SUNXI_SRC_TYPE_EDGE_RISING,
-+};
-+
-+struct sunxi_sc_nmi_reg_offs {
-+ u32 ctrl;
-+ u32 pend;
-+ u32 enable;
-+};
-+
-+static struct sunxi_sc_nmi_reg_offs sun7i_reg_offs = {
-+ .ctrl = 0x00,
-+ .pend = 0x04,
-+ .enable = 0x08,
-+};
-+
-+static struct sunxi_sc_nmi_reg_offs sun6i_reg_offs = {
-+ .ctrl = 0x00,
-+ .pend = 0x04,
-+ .enable = 0x34,
-+};
-+
-+static inline void sunxi_sc_nmi_write(struct irq_chip_generic *gc, u32 off,
-+ u32 val)
-+{
-+ irq_reg_writel(val, gc->reg_base + off);
-+}
-+
-+static inline u32 sunxi_sc_nmi_read(struct irq_chip_generic *gc, u32 off)
-+{
-+ return irq_reg_readl(gc->reg_base + off);
-+}
-+
-+static void sunxi_sc_nmi_handle_irq(unsigned int irq, struct irq_desc *desc)
-+{
-+ struct irq_domain *domain = irq_desc_get_handler_data(desc);
-+ struct irq_chip *chip = irq_get_chip(irq);
-+ unsigned int virq = irq_find_mapping(domain, 0);
-+
-+ chained_irq_enter(chip, desc);
-+ generic_handle_irq(virq);
-+ chained_irq_exit(chip, desc);
-+}
-+
-+static int sunxi_sc_nmi_set_type(struct irq_data *data, unsigned int flow_type)
-+{
-+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(data);
-+ struct irq_chip_type *ct = gc->chip_types;
-+ u32 src_type_reg;
-+ u32 ctrl_off = ct->regs.type;
-+ unsigned int src_type;
-+ unsigned int i;
-+
-+ irq_gc_lock(gc);
-+
-+ switch (flow_type & IRQF_TRIGGER_MASK) {
-+ case IRQ_TYPE_EDGE_FALLING:
-+ src_type = SUNXI_SRC_TYPE_EDGE_FALLING;
-+ break;
-+ case IRQ_TYPE_EDGE_RISING:
-+ src_type = SUNXI_SRC_TYPE_EDGE_RISING;
-+ break;
-+ case IRQ_TYPE_LEVEL_HIGH:
-+ src_type = SUNXI_SRC_TYPE_LEVEL_HIGH;
-+ break;
-+ case IRQ_TYPE_NONE:
-+ case IRQ_TYPE_LEVEL_LOW:
-+ src_type = SUNXI_SRC_TYPE_LEVEL_LOW;
-+ break;
-+ default:
-+ irq_gc_unlock(gc);
-+ pr_err("%s: Cannot assign multiple trigger modes to IRQ %d.\n",
-+ __func__, data->irq);
-+ return -EBADR;
-+ }
-+
-+ irqd_set_trigger_type(data, flow_type);
-+ irq_setup_alt_chip(data, flow_type);
-+
-+ for (i = 0; i <= gc->num_ct; i++, ct++)
-+ if (ct->type & flow_type)
-+ ctrl_off = ct->regs.type;
-+
-+ src_type_reg = sunxi_sc_nmi_read(gc, ctrl_off);
-+ src_type_reg &= ~SUNXI_NMI_SRC_TYPE_MASK;
-+ src_type_reg |= src_type;
-+ sunxi_sc_nmi_write(gc, ctrl_off, src_type_reg);
-+
-+ irq_gc_unlock(gc);
-+
-+ return IRQ_SET_MASK_OK;
-+}
-+
-+static int __init sunxi_sc_nmi_irq_init(struct device_node *node,
-+ struct sunxi_sc_nmi_reg_offs *reg_offs)
-+{
-+ struct irq_domain *domain;
-+ struct irq_chip_generic *gc;
-+ unsigned int irq;
-+ unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
-+ int ret;
-+
-+
-+ domain = irq_domain_add_linear(node, 1, &irq_generic_chip_ops, NULL);
-+ if (!domain) {
-+ pr_err("%s: Could not register interrupt domain.\n", node->name);
-+ return -ENOMEM;
-+ }
-+
-+ ret = irq_alloc_domain_generic_chips(domain, 1, 2, node->name,
-+ handle_fasteoi_irq, clr, 0,
-+ IRQ_GC_INIT_MASK_CACHE);
-+ if (ret) {
-+ pr_err("%s: Could not allocate generic interrupt chip.\n",
-+ node->name);
-+ goto fail_irqd_remove;
-+ }
-+
-+ irq = irq_of_parse_and_map(node, 0);
-+ if (irq <= 0) {
-+ pr_err("%s: unable to parse irq\n", node->name);
-+ ret = -EINVAL;
-+ goto fail_irqd_remove;
-+ }
-+
-+ gc = irq_get_domain_generic_chip(domain, 0);
-+ gc->reg_base = of_iomap(node, 0);
-+ if (!gc->reg_base) {
-+ pr_err("%s: unable to map resource\n", node->name);
-+ ret = -ENOMEM;
-+ goto fail_irqd_remove;
-+ }
-+
-+ gc->chip_types[0].type = IRQ_TYPE_LEVEL_MASK;
-+ gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit;
-+ gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit;
-+ gc->chip_types[0].chip.irq_eoi = irq_gc_ack_set_bit;
-+ gc->chip_types[0].chip.irq_set_type = sunxi_sc_nmi_set_type;
-+ gc->chip_types[0].chip.flags = IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED;
-+ gc->chip_types[0].regs.ack = reg_offs->pend;
-+ gc->chip_types[0].regs.mask = reg_offs->enable;
-+ gc->chip_types[0].regs.type = reg_offs->ctrl;
-+
-+ gc->chip_types[1].type = IRQ_TYPE_EDGE_BOTH;
-+ gc->chip_types[1].chip.name = gc->chip_types[0].chip.name;
-+ gc->chip_types[1].chip.irq_ack = irq_gc_ack_set_bit;
-+ gc->chip_types[1].chip.irq_mask = irq_gc_mask_clr_bit;
-+ gc->chip_types[1].chip.irq_unmask = irq_gc_mask_set_bit;
-+ gc->chip_types[1].chip.irq_set_type = sunxi_sc_nmi_set_type;
-+ gc->chip_types[1].regs.ack = reg_offs->pend;
-+ gc->chip_types[1].regs.mask = reg_offs->enable;
-+ gc->chip_types[1].regs.type = reg_offs->ctrl;
-+ gc->chip_types[1].handler = handle_edge_irq;
-+
-+ sunxi_sc_nmi_write(gc, reg_offs->enable, 0);
-+ sunxi_sc_nmi_write(gc, reg_offs->pend, 0x1);
-+
-+ irq_set_handler_data(irq, domain);
-+ irq_set_chained_handler(irq, sunxi_sc_nmi_handle_irq);
-+
-+ return 0;
-+
-+fail_irqd_remove:
-+ irq_domain_remove(domain);
-+
-+ return ret;
-+}
-+
-+static int __init sun6i_sc_nmi_irq_init(struct device_node *node,
-+ struct device_node *parent)
-+{
-+ return sunxi_sc_nmi_irq_init(node, &sun6i_reg_offs);
-+}
-+IRQCHIP_DECLARE(sun6i_sc_nmi, "allwinner,sun6i-a31-sc-nmi", sun6i_sc_nmi_irq_init);
-+
-+static int __init sun7i_sc_nmi_irq_init(struct device_node *node,
-+ struct device_node *parent)
-+{
-+ return sunxi_sc_nmi_irq_init(node, &sun7i_reg_offs);
-+}
-+IRQCHIP_DECLARE(sun7i_sc_nmi, "allwinner,sun7i-a20-sc-nmi", sun7i_sc_nmi_irq_init);
diff --git a/target/linux/sunxi/patches-3.14/206-dt-sun67i-add-nmi-irqchip.patch b/target/linux/sunxi/patches-3.14/206-dt-sun67i-add-nmi-irqchip.patch
deleted file mode 100644
index 3f18c50d88..0000000000
--- a/target/linux/sunxi/patches-3.14/206-dt-sun67i-add-nmi-irqchip.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From eebb592523672ee7288b9327bd222165db638d1a Mon Sep 17 00:00:00 2001
-From: Carlo Caione <carlo@caione.org>
-Date: Thu, 27 Feb 2014 20:34:21 +0100
-Subject: [PATCH] ARM: sun7i/sun6i: dts: Add NMI irqchip support
-
-This patch adds DTS entries for NMI controller as child of GIC.
-
-Signed-off-by: Carlo Caione <carlo@caione.org>
----
- arch/arm/boot/dts/sun6i-a31.dtsi | 8 ++++++++
- arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++
- 2 files changed, 16 insertions(+)
-
---- a/arch/arm/boot/dts/sun6i-a31.dtsi
-+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
-@@ -370,6 +370,14 @@
- interrupts = <1 9 0xf04>;
- };
-
-+ nmi_intc: interrupt-controller@01f00c0c {
-+ compatible = "allwinner,sun6i-a31-sc-nmi";
-+ interrupt-controller;
-+ #interrupt-cells = <2>;
-+ reg = <0x01f00c0c 0x38>;
-+ interrupts = <0 32 4>;
-+ };
-+
- cpucfg@01f01c00 {
- compatible = "allwinner,sun6i-a31-cpuconfig";
- reg = <0x01f01c00 0x300>;
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -401,6 +401,14 @@
- #size-cells = <1>;
- ranges;
-
-+ nmi_intc: interrupt-controller@01c00030 {
-+ compatible = "allwinner,sun7i-a20-sc-nmi";
-+ interrupt-controller;
-+ #interrupt-cells = <2>;
-+ reg = <0x01c00030 0x0c>;
-+ interrupts = <0 0 4>;
-+ };
-+
- spi0: spi@01c05000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c05000 0x1000>;
diff --git a/target/linux/sunxi/patches-3.14/210-mfd-add-axp20x-pmic-driver.patch b/target/linux/sunxi/patches-3.14/210-mfd-add-axp20x-pmic-driver.patch
deleted file mode 100644
index 6197300e9e..0000000000
--- a/target/linux/sunxi/patches-3.14/210-mfd-add-axp20x-pmic-driver.patch
+++ /dev/null
@@ -1,502 +0,0 @@
-From 509326e0138b762067904c0c60f818e9bdba4cd4 Mon Sep 17 00:00:00 2001
-From: Carlo Caione <carlo@caione.org>
-Date: Sat, 1 Mar 2014 17:45:46 +0100
-Subject: [PATCH] mfd: AXP20x: Add mfd driver for AXP20x PMIC
-
-This patch introduces the preliminary support for PMICs X-Powers AXP202
-and AXP209. The AXP209 and AXP202 are the PMUs (Power Management Unit)
-used by A10, A13 and A20 SoCs and developed by X-Powers, a sister company
-of Allwinner.
-
-The core enables support for two subsystems:
-- PEK (Power Enable Key)
-- Regulators
-
-Signed-off-by: Carlo Caione <carlo@caione.org>
----
- arch/arm/configs/sunxi_defconfig | 1 +
- drivers/mfd/Kconfig | 12 ++
- drivers/mfd/Makefile | 1 +
- drivers/mfd/axp20x.c | 250 +++++++++++++++++++++++++++++++++++++++
- include/linux/mfd/axp20x.h | 180 ++++++++++++++++++++++++++++
- 5 files changed, 444 insertions(+)
- create mode 100644 drivers/mfd/axp20x.c
- create mode 100644 include/linux/mfd/axp20x.h
-
---- a/arch/arm/configs/sunxi_defconfig
-+++ b/arch/arm/configs/sunxi_defconfig
-@@ -55,6 +55,7 @@ CONFIG_GPIO_SYSFS=y
- # CONFIG_HWMON is not set
- CONFIG_WATCHDOG=y
- CONFIG_SUNXI_WATCHDOG=y
-+CONFIG_MFD_AXP20X=y
- # CONFIG_USB_SUPPORT is not set
- CONFIG_NEW_LEDS=y
- CONFIG_LEDS_CLASS=y
---- a/drivers/mfd/Kconfig
-+++ b/drivers/mfd/Kconfig
-@@ -59,6 +59,18 @@ config MFD_AAT2870_CORE
- additional drivers must be enabled in order to use the
- functionality of the device.
-
-+config MFD_AXP20X
-+ bool "X-Powers AXP20X"
-+ select MFD_CORE
-+ select REGMAP_I2C
-+ select REGMAP_IRQ
-+ depends on I2C=y
-+ help
-+ If you say Y here you get support for the AXP20X.
-+ This driver provides common support for accessing the device,
-+ additional drivers must be enabled in order to use the
-+ functionality of the device.
-+
- config MFD_CROS_EC
- tristate "ChromeOS Embedded Controller"
- select MFD_CORE
---- a/drivers/mfd/Makefile
-+++ b/drivers/mfd/Makefile
-@@ -101,6 +101,7 @@ obj-$(CONFIG_PMIC_DA9052) += da9052-irq.
- obj-$(CONFIG_PMIC_DA9052) += da9052-core.o
- obj-$(CONFIG_MFD_DA9052_SPI) += da9052-spi.o
- obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o
-+obj-$(CONFIG_MFD_AXP20X) += axp20x.o
-
- obj-$(CONFIG_MFD_LP3943) += lp3943.o
- obj-$(CONFIG_MFD_LP8788) += lp8788.o lp8788-irq.o
---- /dev/null
-+++ b/drivers/mfd/axp20x.c
-@@ -0,0 +1,250 @@
-+/*
-+ * axp20x.c - mfd core driver for the X-Powers AXP202 and AXP209
-+ *
-+ * Author: Carlo Caione <carlo@caione.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/err.h>
-+#include <linux/i2c.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/pm_runtime.h>
-+#include <linux/regmap.h>
-+#include <linux/slab.h>
-+#include <linux/regulator/consumer.h>
-+#include <linux/mfd/axp20x.h>
-+#include <linux/mfd/core.h>
-+#include <linux/of_device.h>
-+#include <linux/of_irq.h>
-+
-+#define AXP20X_OFF 0x80
-+
-+static const struct regmap_range axp20x_writeable_ranges[] = {
-+ regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
-+ regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES),
-+};
-+
-+static const struct regmap_range axp20x_volatile_ranges[] = {
-+ regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE),
-+};
-+
-+static const struct regmap_access_table axp20x_writeable_table = {
-+ .yes_ranges = axp20x_writeable_ranges,
-+ .n_yes_ranges = ARRAY_SIZE(axp20x_writeable_ranges),
-+};
-+
-+static const struct regmap_access_table axp20x_volatile_table = {
-+ .yes_ranges = axp20x_volatile_ranges,
-+ .n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges),
-+};
-+
-+static struct resource axp20x_pek_resources[] = {
-+ {
-+ .name = "PEK_DBR",
-+ .start = AXP20X_IRQ_PEK_RIS_EDGE,
-+ .end = AXP20X_IRQ_PEK_RIS_EDGE,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ {
-+ .name = "PEK_DBF",
-+ .start = AXP20X_IRQ_PEK_FAL_EDGE,
-+ .end = AXP20X_IRQ_PEK_FAL_EDGE,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static const struct regmap_config axp20x_regmap_config = {
-+ .reg_bits = 8,
-+ .val_bits = 8,
-+ .wr_table = &axp20x_writeable_table,
-+ .volatile_table = &axp20x_volatile_table,
-+ .max_register = AXP20X_FG_RES,
-+ .cache_type = REGCACHE_RBTREE,
-+};
-+
-+#define AXP20X_IRQ(_irq, _off, _mask) \
-+ [AXP20X_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) }
-+
-+static const struct regmap_irq axp20x_regmap_irqs[] = {
-+ AXP20X_IRQ(ACIN_OVER_V, 0, 7),
-+ AXP20X_IRQ(ACIN_PLUGIN, 0, 6),
-+ AXP20X_IRQ(ACIN_REMOVAL, 0, 5),
-+ AXP20X_IRQ(VBUS_OVER_V, 0, 4),
-+ AXP20X_IRQ(VBUS_PLUGIN, 0, 3),
-+ AXP20X_IRQ(VBUS_REMOVAL, 0, 2),
-+ AXP20X_IRQ(VBUS_V_LOW, 0, 1),
-+ AXP20X_IRQ(BATT_PLUGIN, 1, 7),
-+ AXP20X_IRQ(BATT_REMOVAL, 1, 6),
-+ AXP20X_IRQ(BATT_ENT_ACT_MODE, 1, 5),
-+ AXP20X_IRQ(BATT_EXIT_ACT_MODE, 1, 4),
-+ AXP20X_IRQ(CHARG, 1, 3),
-+ AXP20X_IRQ(CHARG_DONE, 1, 2),
-+ AXP20X_IRQ(BATT_TEMP_HIGH, 1, 1),
-+ AXP20X_IRQ(BATT_TEMP_LOW, 1, 0),
-+ AXP20X_IRQ(DIE_TEMP_HIGH, 2, 7),
-+ AXP20X_IRQ(CHARG_I_LOW, 2, 6),
-+ AXP20X_IRQ(DCDC1_V_LONG, 2, 5),
-+ AXP20X_IRQ(DCDC2_V_LONG, 2, 4),
-+ AXP20X_IRQ(DCDC3_V_LONG, 2, 3),
-+ AXP20X_IRQ(PEK_SHORT, 2, 1),
-+ AXP20X_IRQ(PEK_LONG, 2, 0),
-+ AXP20X_IRQ(N_OE_PWR_ON, 3, 7),
-+ AXP20X_IRQ(N_OE_PWR_OFF, 3, 6),
-+ AXP20X_IRQ(VBUS_VALID, 3, 5),
-+ AXP20X_IRQ(VBUS_NOT_VALID, 3, 4),
-+ AXP20X_IRQ(VBUS_SESS_VALID, 3, 3),
-+ AXP20X_IRQ(VBUS_SESS_END, 3, 2),
-+ AXP20X_IRQ(LOW_PWR_LVL1, 3, 1),
-+ AXP20X_IRQ(LOW_PWR_LVL2, 3, 0),
-+ AXP20X_IRQ(TIMER, 4, 7),
-+ AXP20X_IRQ(PEK_RIS_EDGE, 4, 6),
-+ AXP20X_IRQ(PEK_FAL_EDGE, 4, 5),
-+ AXP20X_IRQ(GPIO3_INPUT, 4, 3),
-+ AXP20X_IRQ(GPIO2_INPUT, 4, 2),
-+ AXP20X_IRQ(GPIO1_INPUT, 4, 1),
-+ AXP20X_IRQ(GPIO0_INPUT, 4, 0),
-+};
-+
-+static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
-+ .name = "axp20x_irq_chip",
-+ .status_base = AXP20X_IRQ1_STATE,
-+ .ack_base = AXP20X_IRQ1_STATE,
-+ .mask_base = AXP20X_IRQ1_EN,
-+ .num_regs = 5,
-+ .irqs = axp20x_regmap_irqs,
-+ .num_irqs = ARRAY_SIZE(axp20x_regmap_irqs),
-+ .mask_invert = true,
-+ .init_ack_masked = true,
-+};
-+
-+static struct mfd_cell axp20x_cells[] = {
-+ {
-+ .name = "axp20x-pek",
-+ .of_compatible = "x-powers,axp20x-pek",
-+ .num_resources = ARRAY_SIZE(axp20x_pek_resources),
-+ .resources = axp20x_pek_resources,
-+ }, {
-+ .name = "axp20x-regulator",
-+ },
-+};
-+
-+const struct of_device_id axp20x_of_match[] = {
-+ { .compatible = "x-powers,axp202", .data = (void *) AXP202_ID },
-+ { .compatible = "x-powers,axp209", .data = (void *) AXP209_ID },
-+ { },
-+};
-+
-+static struct axp20x_dev *axp20x_pm_power_off;
-+static void axp20x_power_off(void)
-+{
-+ regmap_write(axp20x_pm_power_off->regmap, AXP20X_OFF_CTRL,
-+ AXP20X_OFF);
-+}
-+
-+static int axp20x_i2c_probe(struct i2c_client *i2c,
-+ const struct i2c_device_id *id)
-+{
-+ struct axp20x_dev *axp20x;
-+ const struct of_device_id *of_id;
-+ struct device_node *node = i2c->dev.of_node;
-+ int ret;
-+
-+ axp20x = devm_kzalloc(&i2c->dev, sizeof(*axp20x), GFP_KERNEL);
-+ if (!axp20x)
-+ return -ENOMEM;
-+
-+ of_id = of_match_device(axp20x_of_match, &i2c->dev);
-+ if (!of_id) {
-+ dev_err(&i2c->dev, "Unable to setup AXP20X data\n");
-+ return -ENODEV;
-+ }
-+ axp20x->variant = (int) of_id->data;
-+
-+ axp20x->i2c_client = i2c;
-+ axp20x->dev = &i2c->dev;
-+ dev_set_drvdata(axp20x->dev, axp20x);
-+
-+ axp20x->regmap = devm_regmap_init_i2c(i2c, &axp20x_regmap_config);
-+ if (IS_ERR(axp20x->regmap)) {
-+ ret = PTR_ERR(axp20x->regmap);
-+ dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
-+ return ret;
-+ }
-+
-+ axp20x->irq = i2c->irq;
-+ ret = regmap_add_irq_chip(axp20x->regmap, axp20x->irq,
-+ IRQF_ONESHOT | IRQF_SHARED, -1,
-+ &axp20x_regmap_irq_chip,
-+ &axp20x->regmap_irqc);
-+ if (ret) {
-+ dev_err(&i2c->dev, "failed to add irq chip: %d\n", ret);
-+ return ret;
-+ }
-+
-+ ret = mfd_add_devices(axp20x->dev, -1, axp20x_cells,
-+ ARRAY_SIZE(axp20x_cells), NULL, 0, NULL);
-+ if (ret) {
-+ dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret);
-+ goto mfd_err;
-+ }
-+
-+ axp20x->pm_off = of_property_read_bool(node, "axp,system-power-controller");
-+
-+ if (axp20x->pm_off && !pm_power_off) {
-+ axp20x_pm_power_off = axp20x;
-+ pm_power_off = axp20x_power_off;
-+ }
-+
-+ dev_info(&i2c->dev, "AXP20X driver loaded\n");
-+
-+ return 0;
-+
-+mfd_err:
-+ regmap_del_irq_chip(axp20x->irq, axp20x->regmap_irqc);
-+
-+ return ret;
-+}
-+
-+static int axp20x_i2c_remove(struct i2c_client *i2c)
-+{
-+ struct axp20x_dev *axp20x = i2c_get_clientdata(i2c);
-+
-+ if (axp20x == axp20x_pm_power_off) {
-+ axp20x_pm_power_off = NULL;
-+ pm_power_off = NULL;
-+ }
-+
-+ mfd_remove_devices(axp20x->dev);
-+ regmap_del_irq_chip(axp20x->i2c_client->irq, axp20x->regmap_irqc);
-+
-+ return 0;
-+}
-+
-+static const struct i2c_device_id axp20x_i2c_id[] = {
-+ { "axp202", AXP202_ID },
-+ { "axp209", AXP209_ID },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id);
-+
-+static struct i2c_driver axp20x_i2c_driver = {
-+ .driver = {
-+ .name = "axp20x",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(axp20x_of_match),
-+ },
-+ .probe = axp20x_i2c_probe,
-+ .remove = axp20x_i2c_remove,
-+ .id_table = axp20x_i2c_id,
-+};
-+
-+module_i2c_driver(axp20x_i2c_driver);
-+
-+MODULE_DESCRIPTION("PMIC MFD core driver for AXP20X");
-+MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/include/linux/mfd/axp20x.h
-@@ -0,0 +1,180 @@
-+/*
-+ * Functions to access AXP20X power management chip.
-+ *
-+ * Copyright (C) 2013, Carlo Caione <carlo@caione.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef __LINUX_MFD_AXP20X_H
-+#define __LINUX_MFD_AXP20X_H
-+
-+#define AXP202_ID 0
-+#define AXP209_ID 1
-+
-+#define AXP20X_DATACACHE(m) (0x04 + (m))
-+
-+/* Power supply */
-+#define AXP20X_PWR_INPUT_STATUS 0x00
-+#define AXP20X_PWR_OP_MODE 0x01
-+#define AXP20X_USB_OTG_STATUS 0x02
-+#define AXP20X_PWR_OUT_CTRL 0x12
-+#define AXP20X_DCDC2_V_OUT 0x23
-+#define AXP20X_DCDC2_LDO3_V_SCAL 0x25
-+#define AXP20X_DCDC3_V_OUT 0x27
-+#define AXP20X_LDO24_V_OUT 0x28
-+#define AXP20X_LDO3_V_OUT 0x29
-+#define AXP20X_VBUS_IPSOUT_MGMT 0x30
-+#define AXP20X_V_OFF 0x31
-+#define AXP20X_OFF_CTRL 0x32
-+#define AXP20X_CHRG_CTRL1 0x33
-+#define AXP20X_CHRG_CTRL2 0x34
-+#define AXP20X_CHRG_BAK_CTRL 0x35
-+#define AXP20X_PEK_KEY 0x36
-+#define AXP20X_DCDC_FREQ 0x37
-+#define AXP20X_V_LTF_CHRG 0x38
-+#define AXP20X_V_HTF_CHRG 0x39
-+#define AXP20X_APS_WARN_L1 0x3a
-+#define AXP20X_APS_WARN_L2 0x3b
-+#define AXP20X_V_LTF_DISCHRG 0x3c
-+#define AXP20X_V_HTF_DISCHRG 0x3d
-+
-+/* Interrupt */
-+#define AXP20X_IRQ1_EN 0x40
-+#define AXP20X_IRQ2_EN 0x41
-+#define AXP20X_IRQ3_EN 0x42
-+#define AXP20X_IRQ4_EN 0x43
-+#define AXP20X_IRQ5_EN 0x44
-+#define AXP20X_IRQ1_STATE 0x48
-+#define AXP20X_IRQ2_STATE 0x49
-+#define AXP20X_IRQ3_STATE 0x4a
-+#define AXP20X_IRQ4_STATE 0x4b
-+#define AXP20X_IRQ5_STATE 0x4c
-+
-+/* ADC */
-+#define AXP20X_ACIN_V_ADC_H 0x56
-+#define AXP20X_ACIN_V_ADC_L 0x57
-+#define AXP20X_ACIN_I_ADC_H 0x58
-+#define AXP20X_ACIN_I_ADC_L 0x59
-+#define AXP20X_VBUS_V_ADC_H 0x5a
-+#define AXP20X_VBUS_V_ADC_L 0x5b
-+#define AXP20X_VBUS_I_ADC_H 0x5c
-+#define AXP20X_VBUS_I_ADC_L 0x5d
-+#define AXP20X_TEMP_ADC_H 0x5e
-+#define AXP20X_TEMP_ADC_L 0x5f
-+#define AXP20X_TS_IN_H 0x62
-+#define AXP20X_TS_IN_L 0x63
-+#define AXP20X_GPIO0_V_ADC_H 0x64
-+#define AXP20X_GPIO0_V_ADC_L 0x65
-+#define AXP20X_GPIO1_V_ADC_H 0x66
-+#define AXP20X_GPIO1_V_ADC_L 0x67
-+#define AXP20X_PWR_BATT_H 0x70
-+#define AXP20X_PWR_BATT_M 0x71
-+#define AXP20X_PWR_BATT_L 0x72
-+#define AXP20X_BATT_V_H 0x78
-+#define AXP20X_BATT_V_L 0x79
-+#define AXP20X_BATT_CHRG_I_H 0x7a
-+#define AXP20X_BATT_CHRG_I_L 0x7b
-+#define AXP20X_BATT_DISCHRG_I_H 0x7c
-+#define AXP20X_BATT_DISCHRG_I_L 0x7d
-+#define AXP20X_IPSOUT_V_HIGH_H 0x7e
-+#define AXP20X_IPSOUT_V_HIGH_L 0x7f
-+
-+/* Power supply */
-+#define AXP20X_DCDC_MODE 0x80
-+#define AXP20X_ADC_EN1 0x82
-+#define AXP20X_ADC_EN2 0x83
-+#define AXP20X_ADC_RATE 0x84
-+#define AXP20X_GPIO10_IN_RANGE 0x85
-+#define AXP20X_GPIO1_ADC_IRQ_RIS 0x86
-+#define AXP20X_GPIO1_ADC_IRQ_FAL 0x87
-+#define AXP20X_TIMER_CTRL 0x8a
-+#define AXP20X_VBUS_MON 0x8b
-+#define AXP20X_OVER_TMP 0x8f
-+
-+/* GPIO */
-+#define AXP20X_GPIO0_CTRL 0x90
-+#define AXP20X_LDO5_V_OUT 0x91
-+#define AXP20X_GPIO1_CTRL 0x92
-+#define AXP20X_GPIO2_CTRL 0x93
-+#define AXP20X_GPIO20_SS 0x94
-+#define AXP20X_GPIO3_CTRL 0x95
-+
-+/* Battery */
-+#define AXP20X_CHRG_CC_31_24 0xb0
-+#define AXP20X_CHRG_CC_23_16 0xb1
-+#define AXP20X_CHRG_CC_15_8 0xb2
-+#define AXP20X_CHRG_CC_7_0 0xb3
-+#define AXP20X_DISCHRG_CC_31_24 0xb4
-+#define AXP20X_DISCHRG_CC_23_16 0xb5
-+#define AXP20X_DISCHRG_CC_15_8 0xb6
-+#define AXP20X_DISCHRG_CC_7_0 0xb7
-+#define AXP20X_CC_CTRL 0xb8
-+#define AXP20X_FG_RES 0xb9
-+
-+/* Regulators IDs */
-+enum {
-+ AXP20X_LDO1 = 0,
-+ AXP20X_LDO2,
-+ AXP20X_LDO3,
-+ AXP20X_LDO4,
-+ AXP20X_LDO5,
-+ AXP20X_DCDC2,
-+ AXP20X_DCDC3,
-+ AXP20X_REG_ID_MAX,
-+};
-+
-+/* IRQs */
-+enum {
-+ AXP20X_IRQ_ACIN_OVER_V = 1,
-+ AXP20X_IRQ_ACIN_PLUGIN,
-+ AXP20X_IRQ_ACIN_REMOVAL,
-+ AXP20X_IRQ_VBUS_OVER_V,
-+ AXP20X_IRQ_VBUS_PLUGIN,
-+ AXP20X_IRQ_VBUS_REMOVAL,
-+ AXP20X_IRQ_VBUS_V_LOW,
-+ AXP20X_IRQ_BATT_PLUGIN,
-+ AXP20X_IRQ_BATT_REMOVAL,
-+ AXP20X_IRQ_BATT_ENT_ACT_MODE,
-+ AXP20X_IRQ_BATT_EXIT_ACT_MODE,
-+ AXP20X_IRQ_CHARG,
-+ AXP20X_IRQ_CHARG_DONE,
-+ AXP20X_IRQ_BATT_TEMP_HIGH,
-+ AXP20X_IRQ_BATT_TEMP_LOW,
-+ AXP20X_IRQ_DIE_TEMP_HIGH,
-+ AXP20X_IRQ_CHARG_I_LOW,
-+ AXP20X_IRQ_DCDC1_V_LONG,
-+ AXP20X_IRQ_DCDC2_V_LONG,
-+ AXP20X_IRQ_DCDC3_V_LONG,
-+ AXP20X_IRQ_PEK_SHORT = 22,
-+ AXP20X_IRQ_PEK_LONG,
-+ AXP20X_IRQ_N_OE_PWR_ON,
-+ AXP20X_IRQ_N_OE_PWR_OFF,
-+ AXP20X_IRQ_VBUS_VALID,
-+ AXP20X_IRQ_VBUS_NOT_VALID,
-+ AXP20X_IRQ_VBUS_SESS_VALID,
-+ AXP20X_IRQ_VBUS_SESS_END,
-+ AXP20X_IRQ_LOW_PWR_LVL1,
-+ AXP20X_IRQ_LOW_PWR_LVL2,
-+ AXP20X_IRQ_TIMER,
-+ AXP20X_IRQ_PEK_RIS_EDGE,
-+ AXP20X_IRQ_PEK_FAL_EDGE,
-+ AXP20X_IRQ_GPIO3_INPUT,
-+ AXP20X_IRQ_GPIO2_INPUT,
-+ AXP20X_IRQ_GPIO1_INPUT,
-+ AXP20X_IRQ_GPIO0_INPUT,
-+};
-+
-+struct axp20x_dev {
-+ struct device *dev;
-+ struct i2c_client *i2c_client;
-+ struct regmap *regmap;
-+ struct regmap_irq_chip_data *regmap_irqc;
-+ int variant;
-+ int irq;
-+ bool pm_off;
-+};
-+
-+#endif /* __LINUX_MFD_AXP20X_H */
diff --git a/target/linux/sunxi/patches-3.14/211-input-add-axp20x-power-enable-key-support.patch b/target/linux/sunxi/patches-3.14/211-input-add-axp20x-power-enable-key-support.patch
deleted file mode 100644
index c7ce5e22b9..0000000000
--- a/target/linux/sunxi/patches-3.14/211-input-add-axp20x-power-enable-key-support.patch
+++ /dev/null
@@ -1,327 +0,0 @@
-From 656b9ff9781aa3ffeb4231f32dfc545c92d04a12 Mon Sep 17 00:00:00 2001
-From: Carlo Caione <carlo@caione.org>
-Date: Sat, 1 Mar 2014 17:45:49 +0100
-Subject: [PATCH] input: misc: Add driver for AXP20x Power Enable Key
-
-This patch add support for the Power Enable Key found on MFD AXP202 and
-AXP209. Besides the basic support for the button, the driver adds two
-entries in sysfs to configure the time delay for power on/off.
-
-Signed-off-by: Carlo Caione <carlo@caione.org>
----
- arch/arm/configs/sunxi_defconfig | 2 +
- drivers/input/misc/Kconfig | 11 ++
- drivers/input/misc/Makefile | 1 +
- drivers/input/misc/axp20x-pek.c | 265 +++++++++++++++++++++++++++++++++++++++
- 4 files changed, 279 insertions(+)
- create mode 100644 drivers/input/misc/axp20x-pek.c
-
---- a/arch/arm/configs/sunxi_defconfig
-+++ b/arch/arm/configs/sunxi_defconfig
-@@ -40,6 +40,8 @@ CONFIG_SUN4I_EMAC=y
- # CONFIG_NET_VENDOR_STMICRO is not set
- # CONFIG_NET_VENDOR_WIZNET is not set
- # CONFIG_WLAN is not set
-+CONFIG_INPUT_MISC=y
-+CONFIG_INPUT_AXP20X_PEK=y
- CONFIG_SERIAL_8250=y
- CONFIG_SERIAL_8250_CONSOLE=y
- CONFIG_SERIAL_8250_NR_UARTS=8
---- a/drivers/input/misc/Kconfig
-+++ b/drivers/input/misc/Kconfig
-@@ -393,6 +393,17 @@ config INPUT_RETU_PWRBUTTON
- To compile this driver as a module, choose M here. The module will
- be called retu-pwrbutton.
-
-+config INPUT_AXP20X_PEK
-+ tristate "X-Powers AXP20X power button driver"
-+ depends on MFD_AXP20X
-+ help
-+ Say Y here if you want to enable power key reporting via the
-+ AXP20X PMIC.
-+
-+ To compile this driver as a module, choose M here. The module will
-+ be called axp20x-pek.
-+
-+
- config INPUT_TWL4030_PWRBUTTON
- tristate "TWL4030 Power button Driver"
- depends on TWL4030_CORE
---- a/drivers/input/misc/Makefile
-+++ b/drivers/input/misc/Makefile
-@@ -50,6 +50,7 @@ obj-$(CONFIG_INPUT_POWERMATE) += powerm
- obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o
- obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o
- obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o
-+obj-$(CONFIG_INPUT_AXP20X_PEK) += axp20x-pek.o
- obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o
- obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
- obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o
---- /dev/null
-+++ b/drivers/input/misc/axp20x-pek.c
-@@ -0,0 +1,265 @@
-+/*
-+ * axp20x power button driver.
-+ *
-+ * Copyright (C) 2013 Carlo Caione <carlo@caione.org>
-+ *
-+ * This file is subject to the terms and conditions of the GNU General
-+ * Public License. See the file "COPYING" in the main directory of this
-+ * archive for more details.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/errno.h>
-+#include <linux/irq.h>
-+#include <linux/init.h>
-+#include <linux/input.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/mfd/axp20x.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/regmap.h>
-+#include <linux/slab.h>
-+
-+#define AXP20X_PEK_STARTUP_MASK (0xc0)
-+#define AXP20X_PEK_SHUTDOWN_MASK (0x03)
-+
-+static const char const *startup_time[] = { "128mS", "3S" , "1S", "2S" };
-+static const char const *shutdown_time[] = { "4S", "6S" , "8S", "10S" };
-+
-+struct axp20x_pek {
-+ struct axp20x_dev *axp20x;
-+ struct input_dev *input;
-+ int irq_dbr;
-+ int irq_dbf;
-+};
-+
-+struct axp20x_pek_ext_attr {
-+ const char const **str;
-+ unsigned int mask;
-+};
-+
-+static struct axp20x_pek_ext_attr axp20x_pek_startup_ext_attr = {
-+ .str = startup_time,
-+ .mask = AXP20X_PEK_STARTUP_MASK,
-+};
-+
-+static struct axp20x_pek_ext_attr axp20x_pek_shutdown_ext_attr = {
-+ .str = shutdown_time,
-+ .mask = AXP20X_PEK_SHUTDOWN_MASK,
-+};
-+
-+static struct axp20x_pek_ext_attr *get_axp_ext_attr(struct device_attribute *attr)
-+{
-+ return container_of(attr, struct dev_ext_attribute, attr)->var;
-+}
-+
-+ssize_t axp20x_show_ext_attr(struct device *dev, struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev);
-+ struct axp20x_pek_ext_attr *axp20x_ea = get_axp_ext_attr(attr);
-+ unsigned int val;
-+ int ret, i;
-+ int cnt = 0;
-+
-+ ret = regmap_read(axp20x_pek->axp20x->regmap, AXP20X_PEK_KEY, &val);
-+ if (ret != 0)
-+ return ret;
-+
-+ val &= axp20x_ea->mask;
-+ val >>= ffs(axp20x_ea->mask) - 1;
-+
-+ for (i = 0; i < 4; i++) {
-+ if (val == i)
-+ cnt += sprintf(buf + cnt, "[%s] ", axp20x_ea->str[i]);
-+ else
-+ cnt += sprintf(buf + cnt, "%s ", axp20x_ea->str[i]);
-+ }
-+
-+ cnt += sprintf(buf + cnt, "\n");
-+
-+ return cnt;
-+}
-+
-+ssize_t axp20x_store_ext_attr(struct device *dev, struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+ struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev);
-+ struct axp20x_pek_ext_attr *axp20x_ea = get_axp_ext_attr(attr);
-+ char val_str[20];
-+ int ret, i;
-+ size_t len;
-+
-+ val_str[sizeof(val_str) - 1] = '\0';
-+ strncpy(val_str, buf, sizeof(val_str) - 1);
-+ len = strlen(val_str);
-+
-+ if (len && val_str[len - 1] == '\n')
-+ val_str[len - 1] = '\0';
-+
-+ for (i = 0; i < 4; i++) {
-+ if (!strcmp(val_str, axp20x_ea->str[i])) {
-+ ret = regmap_update_bits(axp20x_pek->axp20x->regmap,
-+ AXP20X_PEK_KEY,
-+ axp20x_ea->mask, i);
-+ if (ret != 0)
-+ return -EINVAL;
-+ return count;
-+ }
-+ }
-+
-+ return -EINVAL;
-+}
-+
-+static struct dev_ext_attribute axp20x_dev_attr_startup = {
-+ .attr = __ATTR(startup, 0644, axp20x_show_ext_attr, axp20x_store_ext_attr),
-+ .var = &axp20x_pek_startup_ext_attr
-+};
-+
-+static struct dev_ext_attribute axp20x_dev_attr_shutdown = {
-+ __ATTR(shutdown, 0644, axp20x_show_ext_attr, axp20x_store_ext_attr),
-+ &axp20x_pek_shutdown_ext_attr
-+};
-+
-+static struct attribute *dev_attrs[] = {
-+ &axp20x_dev_attr_startup.attr.attr,
-+ &axp20x_dev_attr_shutdown.attr.attr,
-+ NULL,
-+};
-+
-+static struct attribute_group dev_attr_group = {
-+ .attrs = dev_attrs,
-+};
-+
-+static const struct attribute_group *dev_attr_groups[] = {
-+ &dev_attr_group,
-+ NULL,
-+};
-+
-+static irqreturn_t axp20x_pek_irq(int irq, void *pwr)
-+{
-+ struct input_dev *idev = pwr;
-+ struct axp20x_pek *axp20x_pek = input_get_drvdata(idev);
-+
-+ if (irq == axp20x_pek->irq_dbr)
-+ input_report_key(idev, KEY_POWER, true);
-+ else if (irq == axp20x_pek->irq_dbf)
-+ input_report_key(idev, KEY_POWER, false);
-+
-+ input_sync(idev);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int axp20x_pek_probe(struct platform_device *pdev)
-+{
-+ struct axp20x_pek *axp20x_pek;
-+ struct axp20x_dev *axp20x;
-+ struct input_dev *idev;
-+ int error;
-+
-+ axp20x_pek = devm_kzalloc(&pdev->dev, sizeof(struct axp20x_pek),
-+ GFP_KERNEL);
-+ if (!axp20x_pek)
-+ return -ENOMEM;
-+
-+ axp20x_pek->axp20x = dev_get_drvdata(pdev->dev.parent);
-+ axp20x = axp20x_pek->axp20x;
-+
-+ axp20x_pek->irq_dbr = platform_get_irq_byname(pdev, "PEK_DBR");
-+ if (axp20x_pek->irq_dbr < 0) {
-+ dev_err(&pdev->dev, "No IRQ for PEK_DBR, error=%d\n",
-+ axp20x_pek->irq_dbr);
-+ return axp20x_pek->irq_dbr;
-+ }
-+ axp20x_pek->irq_dbr = regmap_irq_get_virq(axp20x->regmap_irqc,
-+ axp20x_pek->irq_dbr);
-+
-+ axp20x_pek->irq_dbf = platform_get_irq_byname(pdev, "PEK_DBF");
-+ if (axp20x_pek->irq_dbf < 0) {
-+ dev_err(&pdev->dev, "No IRQ for PEK_DBF, error=%d\n",
-+ axp20x_pek->irq_dbf);
-+ return axp20x_pek->irq_dbf;
-+ }
-+ axp20x_pek->irq_dbf = regmap_irq_get_virq(axp20x->regmap_irqc,
-+ axp20x_pek->irq_dbf);
-+
-+ axp20x_pek->input = devm_input_allocate_device(&pdev->dev);
-+ if (!axp20x_pek->input)
-+ return -ENOMEM;
-+
-+ idev = axp20x_pek->input;
-+
-+ idev->name = "axp20x-pek";
-+ idev->phys = "m1kbd/input2";
-+ idev->dev.parent = &pdev->dev;
-+
-+ input_set_capability(idev, EV_KEY, KEY_POWER);
-+
-+ input_set_drvdata(idev, axp20x_pek);
-+
-+ error = devm_request_threaded_irq(&pdev->dev, axp20x_pek->irq_dbr,
-+ NULL, axp20x_pek_irq, 0,
-+ "axp20x-pek-dbr", idev);
-+ if (error) {
-+ dev_err(axp20x->dev, "Failed to request dbr IRQ#%d: %d\n",
-+ axp20x_pek->irq_dbr, error);
-+
-+ return error;
-+ }
-+
-+ error = devm_request_threaded_irq(&pdev->dev, axp20x_pek->irq_dbf,
-+ NULL, axp20x_pek_irq, 0,
-+ "axp20x-pek-dbf", idev);
-+ if (error) {
-+ dev_err(axp20x->dev, "Failed to request dbf IRQ#%d: %d\n",
-+ axp20x_pek->irq_dbf, error);
-+ return error;
-+ }
-+
-+ idev->dev.groups = dev_attr_groups;
-+ error = input_register_device(idev);
-+ if (error) {
-+ dev_err(axp20x->dev, "Can't register input device: %d\n", error);
-+ return error;
-+ }
-+
-+ platform_set_drvdata(pdev, axp20x_pek);
-+
-+ return 0;
-+}
-+
-+static int axp20x_pek_remove(struct platform_device *pdev)
-+{
-+ struct axp20x_pek *axp20x_pek = platform_get_drvdata(pdev);
-+
-+ input_unregister_device(axp20x_pek->input);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id axp20x_pek_match[] = {
-+ { .compatible = "x-powers,axp20x-pek", },
-+ { /* sentinel */ },
-+};
-+MODULE_DEVICE_TABLE(of, axp20x_pek_match);
-+
-+static struct platform_driver axp20x_pek_driver = {
-+ .probe = axp20x_pek_probe,
-+ .remove = axp20x_pek_remove,
-+ .driver = {
-+ .name = "axp20x-pek",
-+ .owner = THIS_MODULE,
-+ .of_match_table = axp20x_pek_match,
-+ },
-+};
-+module_platform_driver(axp20x_pek_driver);
-+
-+MODULE_DESCRIPTION("axp20x Power Button");
-+MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/sunxi/patches-3.14/212-regulator-add-axp20x-regulator-support.patch b/target/linux/sunxi/patches-3.14/212-regulator-add-axp20x-regulator-support.patch
deleted file mode 100644
index 1ec041ceb7..0000000000
--- a/target/linux/sunxi/patches-3.14/212-regulator-add-axp20x-regulator-support.patch
+++ /dev/null
@@ -1,402 +0,0 @@
-From c3af279a9031b3375d3e5a684619c1adbbe30da9 Mon Sep 17 00:00:00 2001
-From: Carlo Caione <carlo@caione.org>
-Date: Sat, 1 Mar 2014 17:45:51 +0100
-Subject: [PATCH] regulator: AXP20x: Add support for regulators subsystem
-
-AXP202 and AXP209 come with two synchronous step-down DC-DCs and five
-LDOs. This patch introduces basic support for those regulators.
-
-Signed-off-by: Carlo Caione <carlo@caione.org>
----
- arch/arm/configs/sunxi_defconfig | 1 +
- drivers/regulator/Kconfig | 7 +
- drivers/regulator/Makefile | 1 +
- drivers/regulator/axp20x-regulator.c | 349 +++++++++++++++++++++++++++++++++++
- 4 files changed, 358 insertions(+)
- create mode 100644 drivers/regulator/axp20x-regulator.c
-
---- a/arch/arm/configs/sunxi_defconfig
-+++ b/arch/arm/configs/sunxi_defconfig
-@@ -72,3 +72,4 @@ CONFIG_NFS_FS=y
- CONFIG_ROOT_NFS=y
- CONFIG_NLS=y
- CONFIG_PRINTK_TIME=y
-+CONFIG_REGULATOR_AXP20X=y
---- a/drivers/regulator/Kconfig
-+++ b/drivers/regulator/Kconfig
-@@ -139,6 +139,13 @@ config REGULATOR_AS3722
- AS3722 PMIC. This will enable support for all the software
- controllable DCDC/LDO regulators.
-
-+config REGULATOR_AXP20X
-+ tristate "X-POWERS AXP20X PMIC Regulators"
-+ depends on MFD_AXP20X
-+ help
-+ This driver provides support for the voltage regulators on the
-+ AXP20X PMIC.
-+
- config REGULATOR_DA903X
- tristate "Dialog Semiconductor DA9030/DA9034 regulators"
- depends on PMIC_DA903X
---- a/drivers/regulator/Makefile
-+++ b/drivers/regulator/Makefile
-@@ -20,6 +20,7 @@ obj-$(CONFIG_REGULATOR_ANATOP) += anatop
- obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o
- obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
- obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o
-+obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o
- obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
- obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o
- obj-$(CONFIG_REGULATOR_DA9055) += da9055-regulator.o
---- /dev/null
-+++ b/drivers/regulator/axp20x-regulator.c
-@@ -0,0 +1,349 @@
-+/*
-+ * axp20x regulators driver.
-+ *
-+ * Copyright (C) 2013 Carlo Caione <carlo@caione.org>
-+ *
-+ * This file is subject to the terms and conditions of the GNU General
-+ * Public License. See the file "COPYING" in the main directory of this
-+ * archive for more details.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/err.h>
-+#include <linux/platform_device.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/regulator/driver.h>
-+#include <linux/regulator/of_regulator.h>
-+#include <linux/mfd/axp20x.h>
-+#include <linux/regmap.h>
-+
-+#define AXP20X_IO_ENABLED (0x03)
-+
-+#define AXP20X_WORKMODE_DCDC2_MASK BIT(2)
-+#define AXP20X_WORKMODE_DCDC3_MASK BIT(1)
-+
-+#define AXP20X_FREQ_DCDC_MASK (0x0f)
-+
-+struct axp20x_regulators {
-+ struct regulator_desc rdesc[AXP20X_REG_ID_MAX];
-+ struct regulator_dev *rdev[AXP20X_REG_ID_MAX];
-+ struct axp20x_dev *axp20x;
-+};
-+
-+#define AXP20X_DESC(_id, _min, _max, _step, _vreg, _vmask, _ereg, _emask) \
-+ [AXP20X_##_id] = { \
-+ .name = #_id, \
-+ .type = REGULATOR_VOLTAGE, \
-+ .id = AXP20X_##_id, \
-+ .n_voltages = (((_max) - (_min)) / (_step) + 1), \
-+ .owner = THIS_MODULE, \
-+ .min_uV = (_min) * 1000, \
-+ .uV_step = (_step) * 1000, \
-+ .vsel_reg = (_vreg), \
-+ .vsel_mask = (_vmask), \
-+ .enable_reg = (_ereg), \
-+ .enable_mask = (_emask), \
-+ .ops = &axp20x_ops, \
-+ }
-+
-+#define AXP20X_DESC_IO(_id, _min, _max, _step, _vreg, _vmask, _ereg, _emask) \
-+ [AXP20X_##_id] = { \
-+ .name = #_id, \
-+ .type = REGULATOR_VOLTAGE, \
-+ .id = AXP20X_##_id, \
-+ .n_voltages = (((_max) - (_min)) / (_step) + 1), \
-+ .owner = THIS_MODULE, \
-+ .min_uV = (_min) * 1000, \
-+ .uV_step = (_step) * 1000, \
-+ .vsel_reg = (_vreg), \
-+ .vsel_mask = (_vmask), \
-+ .enable_reg = (_ereg), \
-+ .enable_mask = (_emask), \
-+ .ops = &axp20x_ops_io, \
-+ }
-+
-+#define AXP20X_DESC_FIXED(_id, _volt) \
-+ [AXP20X_##_id] = { \
-+ .name = #_id, \
-+ .type = REGULATOR_VOLTAGE, \
-+ .id = AXP20X_##_id, \
-+ .n_voltages = 1, \
-+ .owner = THIS_MODULE, \
-+ .min_uV = (_volt) * 1000, \
-+ .ops = &axp20x_ops, \
-+ }
-+
-+#define AXP20X_DESC_TABLE(_id, _table, _vreg, _vmask, _ereg, _emask) \
-+ [AXP20X_##_id] = { \
-+ .name = #_id, \
-+ .type = REGULATOR_VOLTAGE, \
-+ .id = AXP20X_##_id, \
-+ .n_voltages = ARRAY_SIZE(_table), \
-+ .owner = THIS_MODULE, \
-+ .vsel_reg = (_vreg), \
-+ .vsel_mask = (_vmask), \
-+ .enable_reg = (_ereg), \
-+ .enable_mask = (_emask), \
-+ .volt_table = (_table), \
-+ .ops = &axp20x_ops_table, \
-+ }
-+
-+static int axp20x_ldo4_data[] = { 1250000, 1300000, 1400000, 1500000, 1600000, 1700000,
-+ 1800000, 1900000, 2000000, 2500000, 2700000, 2800000,
-+ 3000000, 3100000, 3200000, 3300000 };
-+
-+static int axp20x_set_suspend_voltage(struct regulator_dev *rdev, int uV)
-+{
-+ return regulator_set_voltage_sel_regmap(rdev, 0);
-+}
-+
-+static int axp20x_io_enable_regmap(struct regulator_dev *rdev)
-+{
-+ return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
-+ rdev->desc->enable_mask, AXP20X_IO_ENABLED);
-+}
-+
-+static int axp109_io_is_enabled_regmap(struct regulator_dev *rdev)
-+{
-+ unsigned int val;
-+ int ret;
-+
-+ ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
-+ if (ret != 0)
-+ return ret;
-+
-+ val &= rdev->desc->enable_mask;
-+ return (val == AXP20X_IO_ENABLED);
-+}
-+
-+static struct regulator_ops axp20x_ops_table = {
-+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
-+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
-+ .list_voltage = regulator_list_voltage_table,
-+ .enable = regulator_enable_regmap,
-+ .disable = regulator_disable_regmap,
-+ .is_enabled = regulator_is_enabled_regmap,
-+ .set_suspend_enable = regulator_enable_regmap,
-+ .set_suspend_disable = regulator_disable_regmap,
-+ .set_suspend_voltage = axp20x_set_suspend_voltage,
-+};
-+
-+
-+static struct regulator_ops axp20x_ops = {
-+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
-+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
-+ .list_voltage = regulator_list_voltage_linear,
-+ .enable = regulator_enable_regmap,
-+ .disable = regulator_disable_regmap,
-+ .is_enabled = regulator_is_enabled_regmap,
-+ .set_suspend_enable = regulator_enable_regmap,
-+ .set_suspend_disable = regulator_disable_regmap,
-+ .set_suspend_voltage = axp20x_set_suspend_voltage,
-+};
-+
-+static struct regulator_ops axp20x_ops_io = {
-+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
-+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
-+ .list_voltage = regulator_list_voltage_linear,
-+ .enable = axp20x_io_enable_regmap,
-+ .disable = regulator_disable_regmap,
-+ .is_enabled = axp109_io_is_enabled_regmap,
-+ .set_suspend_enable = regulator_enable_regmap,
-+ .set_suspend_disable = regulator_disable_regmap,
-+ .set_suspend_voltage = axp20x_set_suspend_voltage,
-+};
-+
-+static struct regulator_desc axp20x_regulators[] = {
-+ AXP20X_DESC(DCDC2, 700, 2275, 25, AXP20X_DCDC2_V_OUT, 0x3f,
-+ AXP20X_PWR_OUT_CTRL, 0x10),
-+ AXP20X_DESC(DCDC3, 700, 3500, 25, AXP20X_DCDC3_V_OUT, 0x7f,
-+ AXP20X_PWR_OUT_CTRL, 0x02),
-+ AXP20X_DESC_FIXED(LDO1, 1300),
-+ AXP20X_DESC(LDO2, 1800, 3300, 100, AXP20X_LDO24_V_OUT, 0xf0,
-+ AXP20X_PWR_OUT_CTRL, 0x04),
-+ AXP20X_DESC(LDO3, 700, 3500, 25, AXP20X_LDO3_V_OUT, 0x7f,
-+ AXP20X_PWR_OUT_CTRL, 0x40),
-+ AXP20X_DESC_TABLE(LDO4, axp20x_ldo4_data, AXP20X_LDO24_V_OUT, 0x0f,
-+ AXP20X_PWR_OUT_CTRL, 0x08),
-+ AXP20X_DESC_IO(LDO5, 1800, 3300, 100, AXP20X_LDO5_V_OUT, 0xf0,
-+ AXP20X_GPIO0_CTRL, 0x07),
-+};
-+
-+#define AXP_MATCH(_name, _id) \
-+ [AXP20X_##_id] = { \
-+ .name = #_name, \
-+ .driver_data = (void *) &axp20x_regulators[AXP20X_##_id], \
-+ }
-+
-+static struct of_regulator_match axp20x_matches[] = {
-+ AXP_MATCH(dcdc2, DCDC2),
-+ AXP_MATCH(dcdc3, DCDC3),
-+ AXP_MATCH(ldo1, LDO1),
-+ AXP_MATCH(ldo2, LDO2),
-+ AXP_MATCH(ldo3, LDO3),
-+ AXP_MATCH(ldo4, LDO4),
-+ AXP_MATCH(ldo5, LDO5),
-+};
-+
-+static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
-+{
-+ struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
-+
-+ if (dcdcfreq < 750)
-+ dcdcfreq = 750;
-+
-+ if (dcdcfreq > 1875)
-+ dcdcfreq = 1875;
-+
-+ dcdcfreq = (dcdcfreq - 750) / 75;
-+
-+ return regmap_update_bits(axp20x->regmap, AXP20X_DCDC_FREQ,
-+ AXP20X_FREQ_DCDC_MASK, dcdcfreq);
-+}
-+
-+static int axp20x_regulator_parse_dt(struct platform_device *pdev)
-+{
-+ struct device_node *np, *regulators;
-+ int ret;
-+ u32 dcdcfreq;
-+
-+ np = of_node_get(pdev->dev.parent->of_node);
-+ if (!np)
-+ return 0;
-+
-+ regulators = of_find_node_by_name(np, "regulators");
-+ if (!regulators) {
-+ dev_err(&pdev->dev, "regulators node not found\n");
-+ return -EINVAL;
-+ }
-+
-+ ret = of_regulator_match(&pdev->dev, regulators, axp20x_matches,
-+ ARRAY_SIZE(axp20x_matches));
-+ if (ret < 0) {
-+ dev_err(&pdev->dev, "Error parsing regulator init data: %d\n",
-+ ret);
-+ return ret;
-+ }
-+
-+ dcdcfreq = 0x08;
-+ of_property_read_u32(regulators, "dcdc-freq", &dcdcfreq);
-+ ret = axp20x_set_dcdc_freq(pdev, dcdcfreq);
-+ if (ret < 0) {
-+ dev_err(&pdev->dev, "Error setting dcdc frequency: %d\n", ret);
-+ return ret;
-+ }
-+
-+ of_node_put(regulators);
-+
-+ return 0;
-+}
-+
-+static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 workmode)
-+{
-+ unsigned int mask = AXP20X_WORKMODE_DCDC2_MASK;
-+
-+ if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3))
-+ return -EINVAL;
-+
-+ if (id == AXP20X_DCDC3)
-+ mask = AXP20X_WORKMODE_DCDC3_MASK;
-+
-+ return regmap_update_bits(rdev->regmap, AXP20X_DCDC_MODE, mask, workmode);
-+}
-+
-+static int axp20x_regulator_probe(struct platform_device *pdev)
-+{
-+ struct axp20x_regulators *pmic;
-+ struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
-+ struct regulator_config config = { };
-+ struct regulator_init_data *init_data;
-+ int ret, i;
-+ u32 workmode;
-+
-+ ret = axp20x_regulator_parse_dt(pdev);
-+ if (ret)
-+ return ret;
-+
-+ pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL);
-+ if (!pmic) {
-+ dev_err(&pdev->dev, "Failed to alloc pmic\n");
-+ return -ENOMEM;
-+ }
-+
-+ pmic->axp20x = axp20x;
-+ memcpy(pmic->rdesc, axp20x_regulators, sizeof(pmic->rdesc));
-+ platform_set_drvdata(pdev, pmic);
-+
-+ for (i = 0; i < AXP20X_REG_ID_MAX; i++) {
-+ init_data = axp20x_matches[i].init_data;
-+ if (!init_data)
-+ continue;
-+
-+ config.dev = &pdev->dev;
-+ config.init_data = init_data;
-+ config.driver_data = pmic;
-+ config.regmap = axp20x->regmap;
-+ config.of_node = axp20x_matches[i].of_node;
-+
-+ pmic->rdev[i] = regulator_register(&pmic->rdesc[i], &config);
-+ if (IS_ERR(pmic->rdev[i])) {
-+ ret = PTR_ERR(pmic->rdev[i]);
-+ dev_err(&pdev->dev, "Failed to register %s\n",
-+ pmic->rdesc[i].name);
-+
-+ while (--i >= 0)
-+ regulator_unregister(pmic->rdev[i]);
-+
-+ return ret;
-+ }
-+
-+ ret = of_property_read_u32(axp20x_matches[i].of_node, "dcdc-workmode",
-+ &workmode);
-+ if (!ret) {
-+ ret = axp20x_set_dcdc_workmode(pmic->rdev[i], i, workmode);
-+ if (ret)
-+ dev_err(&pdev->dev, "Failed to set workmode on %s\n",
-+ pmic->rdesc[i].name);
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static int axp20x_regulator_remove(struct platform_device *pdev)
-+{
-+ struct axp20x_regulators *pmic = platform_get_drvdata(pdev);
-+ int i;
-+
-+ for (i = 0; i < AXP20X_REG_ID_MAX; i++)
-+ regulator_unregister(pmic->rdev[i]);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver axp20x_regulator_driver = {
-+ .probe = axp20x_regulator_probe,
-+ .remove = axp20x_regulator_remove,
-+ .driver = {
-+ .name = "axp20x-regulator",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init axp20x_regulator_init(void)
-+{
-+ return platform_driver_register(&axp20x_regulator_driver);
-+}
-+
-+subsys_initcall(axp20x_regulator_init);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
-+MODULE_DESCRIPTION("Regulator Driver for AXP20X PMIC");
diff --git a/target/linux/sunxi/patches-3.14/213-dt-sunxi-add-x-powers.patch b/target/linux/sunxi/patches-3.14/213-dt-sunxi-add-x-powers.patch
deleted file mode 100644
index aa29a01089..0000000000
--- a/target/linux/sunxi/patches-3.14/213-dt-sunxi-add-x-powers.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From 7b42dc4ff2cca887e0c6e1ad291d65b30e64dd92 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Wed, 5 Mar 2014 20:30:41 +0100
-Subject: [PATCH] ARM: sunxi: dt: Add x-powers-axp209.dtsi file
-
-This dtsi describes the axp209 PMIC, and is to be included from inside
-the i2c controller node to which the axp209 is connected.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/x-powers-axp209.dtsi | 60 ++++++++++++++++++++++++++++++++++
- 1 file changed, 60 insertions(+)
- create mode 100644 arch/arm/boot/dts/x-powers-axp209.dtsi
-
---- /dev/null
-+++ b/arch/arm/boot/dts/x-powers-axp209.dtsi
-@@ -0,0 +1,60 @@
-+/*
-+ * x-powers,axp209 common code to be include from inside the axp209 node
-+ *
-+ * Copyright 2014 - Carlo Caione <carlo@caione.org>
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+ compatible = "x-powers,axp209";
-+ interrupt-controller;
-+ #interrupt-cells = <1>;
-+
-+ regulators {
-+ dcdc-freq = "8";
-+
-+ axp_dcdc2: dcdc2 {
-+ regulator-min-microvolt = <700000>;
-+ regulator-max-microvolt = <2275000>;
-+ dcdc-workmode = <0>;
-+ regulator-always-on;
-+ };
-+
-+ axp_dcdc3: dcdc3 {
-+ regulator-min-microvolt = <700000>;
-+ regulator-max-microvolt = <3500000>;
-+ dcdc-workmode = <0>;
-+ regulator-always-on;
-+ };
-+
-+ axp_ldo1: ldo1 {
-+ regulator-min-microvolt = <1300000>;
-+ regulator-max-microvolt = <1300000>;
-+ };
-+
-+ axp_ldo2: ldo2 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ axp_ldo3: ldo3 {
-+ regulator-min-microvolt = <700000>;
-+ regulator-max-microvolt = <3500000>;
-+ };
-+
-+ axp_ldo4: ldo4 {
-+ regulator-min-microvolt = <1250000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ axp_ldo5: ldo5 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+ };
diff --git a/target/linux/sunxi/patches-3.14/214-1-dt-sun7i-add-axp209-to-cubieboard2.patch b/target/linux/sunxi/patches-3.14/214-1-dt-sun7i-add-axp209-to-cubieboard2.patch
deleted file mode 100644
index f7f4d9af98..0000000000
--- a/target/linux/sunxi/patches-3.14/214-1-dt-sun7i-add-axp209-to-cubieboard2.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From c792a05efcfebcf94ba925135a778961700965f5 Mon Sep 17 00:00:00 2001
-From: Carlo Caione <carlo@caione.org>
-Date: Sat, 1 Mar 2014 17:45:48 +0100
-Subject: [PATCH] ARM: sun7i: dt: Add AXP209 support to the cubieboard2
-
-AXP209 is the PMU used by Cubieboard2. This patch enables the AXP209
-support in the dts file.
-
-This patch requires: "ARM: sun7i/sun6i: irqchip: Add irqchip driver for
-NMI controller"
-
-Signed-off-by: Carlo Caione <carlo@caione.org>
----
- arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
-@@ -74,6 +74,16 @@
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-+
-+ axp: axp20x@34 {
-+ reg = <0x34>;
-+ interrupt-parent = <&nmi_intc>;
-+ interrupts = <0 8>;
-+
-+ axp,system-power-controller;
-+
-+ /include/ "x-powers-axp209.dtsi"
-+ };
- };
-
- i2c1: i2c@01c2b000 {
diff --git a/target/linux/sunxi/patches-3.14/214-2-dt-sun4i-add-axp209-to-boards.patch b/target/linux/sunxi/patches-3.14/214-2-dt-sun4i-add-axp209-to-boards.patch
deleted file mode 100644
index 35dea87902..0000000000
--- a/target/linux/sunxi/patches-3.14/214-2-dt-sun4i-add-axp209-to-boards.patch
+++ /dev/null
@@ -1,142 +0,0 @@
-From d14c5523653ca6ce9f1487922c8ab4e571d17b62 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Tue, 11 Mar 2014 16:51:44 +0100
-Subject: [PATCH] ARM: sun4i: dt: Add AXP209 support to various boards
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun4i-a10-a1000.dts | 9 +++++++++
- arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 9 +++++++++
- arch/arm/boot/dts/sun4i-a10-hackberry.dts | 15 +++++++++++++++
- arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 9 +++++++++
- arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 15 +++++++++++++++
- arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 15 +++++++++++++++
- arch/arm/boot/dts/sun4i-a10-pcduino.dts | 9 +++++++++
- 7 files changed, 81 insertions(+)
-
---- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
-+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
-@@ -65,6 +65,15 @@
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-+
-+ axp: axp20x@34 {
-+ reg = <0x34>;
-+ interrupts = <0>;
-+
-+ axp,system-power-controller;
-+
-+ /include/ "x-powers-axp209.dtsi"
-+ };
- };
- };
-
---- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
-+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
-@@ -88,6 +88,15 @@
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-+
-+ axp: axp20x@34 {
-+ reg = <0x34>;
-+ interrupts = <0>;
-+
-+ axp,system-power-controller;
-+
-+ /include/ "x-powers-axp209.dtsi"
-+ };
- };
-
- i2c1: i2c@01c2b000 {
---- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
-+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
-@@ -82,6 +82,21 @@
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-+
-+ i2c0: i2c@01c2ac00 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c0_pins_a>;
-+ status = "okay";
-+
-+ axp: axp20x@34 {
-+ reg = <0x34>;
-+ interrupts = <0>;
-+
-+ axp,system-power-controller;
-+
-+ /include/ "x-powers-axp209.dtsi"
-+ };
-+ };
- };
-
- regulators {
---- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
-+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
-@@ -55,6 +55,21 @@
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-+
-+ i2c0: i2c@01c2ac00 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c0_pins_a>;
-+ status = "okay";
-+
-+ axp: axp20x@34 {
-+ reg = <0x34>;
-+ interrupts = <0>;
-+
-+ axp,system-power-controller;
-+
-+ /include/ "x-powers-axp209.dtsi"
-+ };
-+ };
- };
-
- reg_usb1_vbus: usb1-vbus {
---- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
-+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
-@@ -90,6 +90,21 @@
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-+
-+ i2c0: i2c@01c2ac00 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c0_pins_a>;
-+ status = "okay";
-+
-+ axp: axp20x@34 {
-+ reg = <0x34>;
-+ interrupts = <0>;
-+
-+ axp,system-power-controller;
-+
-+ /include/ "x-powers-axp209.dtsi"
-+ };
-+ };
- };
-
- leds {
---- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
-+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
-@@ -74,6 +74,15 @@
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-+
-+ axp: axp20x@34 {
-+ reg = <0x34>;
-+ interrupts = <0>;
-+
-+ axp,system-power-controller;
-+
-+ /include/ "x-powers-axp209.dtsi"
-+ };
- };
- };
-
diff --git a/target/linux/sunxi/patches-3.14/214-3-dt-sun7i-add-axp209-to-cubietruck.patch b/target/linux/sunxi/patches-3.14/214-3-dt-sun7i-add-axp209-to-cubietruck.patch
deleted file mode 100644
index 8764e9ed5c..0000000000
--- a/target/linux/sunxi/patches-3.14/214-3-dt-sun7i-add-axp209-to-cubietruck.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 886f41537ad5e873caee522704e96e844a485961 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Wed, 5 Mar 2014 20:41:17 +0100
-Subject: [PATCH] ARM: sun7i: dt: Add AXP209 support to cubietruck
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 10 ++++++++++
- arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 10 ++++++++++
- 2 files changed, 20 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-@@ -89,6 +89,16 @@
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
-+
-+ axp: axp20x@34 {
-+ reg = <0x34>;
-+ interrupt-parent = <&nmi_intc>;
-+ interrupts = <0 8>;
-+
-+ axp,system-power-controller;
-+
-+ /include/ "x-powers-axp209.dtsi"
-+ };
- };
-
- i2c0: i2c@01c2ac00 {
---- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
-@@ -127,6 +127,16 @@
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-+
-+ axp: axp20x@34 {
-+ reg = <0x34>;
-+ interrupt-parent = <&nmi_intc>;
-+ interrupts = <0 8>;
-+
-+ axp,system-power-controller;
-+
-+ /include/ "x-powers-axp209.dtsi"
-+ };
- };
-
- i2c1: i2c@01c2b000 {
diff --git a/target/linux/sunxi/patches-3.14/215-2-dt-sun5i-add-address-and-sizecells-to-i2c.patch b/target/linux/sunxi/patches-3.14/215-2-dt-sun5i-add-address-and-sizecells-to-i2c.patch
deleted file mode 100644
index 9b5fd57863..0000000000
--- a/target/linux/sunxi/patches-3.14/215-2-dt-sun5i-add-address-and-sizecells-to-i2c.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 505ad20db47442ae2650a41eca0a7a869aace789 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Wed, 5 Mar 2014 20:40:44 +0100
-Subject: [PATCH] ARM: sun5i: dt: Add address- and size-cells info to i2c
- controller nodes
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun5i-a13.dtsi | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/arch/arm/boot/dts/sun5i-a13.dtsi
-+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
-@@ -503,6 +503,8 @@
- clocks = <&apb1_gates 0>;
- clock-frequency = <100000>;
- status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
- };
-
- i2c1: i2c@01c2b000 {
-@@ -512,6 +514,8 @@
- clocks = <&apb1_gates 1>;
- clock-frequency = <100000>;
- status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
- };
-
- i2c2: i2c@01c2b400 {
-@@ -521,6 +525,8 @@
- clocks = <&apb1_gates 2>;
- clock-frequency = <100000>;
- status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
- };
-
- timer@01c60000 {
diff --git a/target/linux/sunxi/patches-3.14/215-3-dt-sun7i-add-address-and-sizecells-to-i2c.patch b/target/linux/sunxi/patches-3.14/215-3-dt-sun7i-add-address-and-sizecells-to-i2c.patch
deleted file mode 100644
index 35ae842f87..0000000000
--- a/target/linux/sunxi/patches-3.14/215-3-dt-sun7i-add-address-and-sizecells-to-i2c.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 338560ad44f2e8b6f4eb095567830b6c78b35ba2 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Wed, 5 Mar 2014 20:40:57 +0100
-Subject: [PATCH] ARM: sun7i: dt: Add address- and size-cells info to i2c
- controller nodes
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun7i-a20.dtsi | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -848,6 +848,8 @@
- clocks = <&apb1_gates 0>;
- clock-frequency = <100000>;
- status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
- };
-
- i2c1: i2c@01c2b000 {
-@@ -857,6 +859,8 @@
- clocks = <&apb1_gates 1>;
- clock-frequency = <100000>;
- status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
- };
-
- i2c2: i2c@01c2b400 {
-@@ -866,6 +870,8 @@
- clocks = <&apb1_gates 2>;
- clock-frequency = <100000>;
- status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
- };
-
- i2c3: i2c@01c2b800 {
-@@ -875,6 +881,8 @@
- clocks = <&apb1_gates 3>;
- clock-frequency = <100000>;
- status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
- };
-
- i2c4: i2c@01c2bc00 {
-@@ -884,6 +892,8 @@
- clocks = <&apb1_gates 15>;
- clock-frequency = <100000>;
- status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
- };
-
- gmac: ethernet@01c50000 {
diff --git a/target/linux/sunxi/patches-3.14/215-dt-sun4i-add-address-and-sizecells-to-i2c.patch b/target/linux/sunxi/patches-3.14/215-dt-sun4i-add-address-and-sizecells-to-i2c.patch
deleted file mode 100644
index 60fe06f5aa..0000000000
--- a/target/linux/sunxi/patches-3.14/215-dt-sun4i-add-address-and-sizecells-to-i2c.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 46d3d005e5f91d8221676cbb6307e790d4b63345 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Wed, 5 Mar 2014 20:40:26 +0100
-Subject: [PATCH] ARM: sun4i: dt: Add address- and size-cells info to i2c
- controller nodes
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun4i-a10.dtsi | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/arch/arm/boot/dts/sun4i-a10.dtsi
-+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
-@@ -712,6 +712,8 @@
- clocks = <&apb1_gates 0>;
- clock-frequency = <100000>;
- status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
- };
-
- i2c1: i2c@01c2b000 {
-@@ -721,6 +723,8 @@
- clocks = <&apb1_gates 1>;
- clock-frequency = <100000>;
- status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
- };
-
- i2c2: i2c@01c2b400 {
-@@ -730,6 +734,8 @@
- clocks = <&apb1_gates 2>;
- clock-frequency = <100000>;
- status = "disabled";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
- };
- };
- };
diff --git a/target/linux/sunxi/patches-3.14/216-dt-sun7i-add-i2c-to-cubietruck.patch b/target/linux/sunxi/patches-3.14/216-dt-sun7i-add-i2c-to-cubietruck.patch
deleted file mode 100644
index a8b0b61558..0000000000
--- a/target/linux/sunxi/patches-3.14/216-dt-sun7i-add-i2c-to-cubietruck.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 6267355f0e513bed9a5009924abc7a1e7de22ab3 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Mon, 6 Jan 2014 13:58:12 +0800
-Subject: [PATCH] arm: sun7i: cubietruck: Enable the i2c controllers
-
-The Cubietruck makes use of the first three i2c controllers found on the
-Allwinner A20; i2c-0 is used internally for the PMIC, i2c-1 is exposed on
-the board headers, and i2c-2 is used for DDC on the VGA connector. This
-patch enables them in the device tree.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 18 ++++++++++++++++++
- 1 file changed, 18 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-@@ -130,6 +130,24 @@
- reg = <1>;
- };
- };
-+
-+ i2c0: i2c@01c2ac00 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c0_pins_a>;
-+ status = "okay";
-+ };
-+
-+ i2c1: i2c@01c2b000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c1_pins_a>;
-+ status = "okay";
-+ };
-+
-+ i2c2: i2c@01c2b400 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c2_pins_a>;
-+ status = "okay";
-+ };
- };
-
- leds {
diff --git a/target/linux/sunxi/patches-3.14/220-clk-sunxi-remove-calls-to-clk_put.patch b/target/linux/sunxi/patches-3.14/220-clk-sunxi-remove-calls-to-clk_put.patch
deleted file mode 100644
index bac72f99a6..0000000000
--- a/target/linux/sunxi/patches-3.14/220-clk-sunxi-remove-calls-to-clk_put.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 81b745ee30dc7cd230f924f6263879f1b7ffbc0c Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Thu, 13 Mar 2014 16:14:13 +0100
-Subject: [PATCH] clk: sunxi: Remove calls to clk_put
-
-Callers of clk_put must disable the clock first. This also means that as long
-as the clock is enabled the driver should hold a reference to that clock.
-Hence, the call to clk_put here are bogus and should be removed.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- drivers/clk/sunxi/clk-sunxi.c | 8 ++------
- 1 file changed, 2 insertions(+), 6 deletions(-)
-
---- a/drivers/clk/sunxi/clk-sunxi.c
-+++ b/drivers/clk/sunxi/clk-sunxi.c
-@@ -1325,17 +1325,13 @@ static void __init sunxi_clock_protect(v
-
- /* memory bus clock - sun5i+ */
- clk = clk_get(NULL, "mbus");
-- if (!IS_ERR(clk)) {
-+ if (!IS_ERR(clk))
- clk_prepare_enable(clk);
-- clk_put(clk);
-- }
-
- /* DDR clock - sun4i+ */
- clk = clk_get(NULL, "pll5_ddr");
-- if (!IS_ERR(clk)) {
-+ if (!IS_ERR(clk))
- clk_prepare_enable(clk);
-- clk_put(clk);
-- }
- }
-
- static void __init sunxi_init_clocks(void)
diff --git a/target/linux/sunxi/patches-3.14/230-net-rfkill-changes.patch b/target/linux/sunxi/patches-3.14/230-net-rfkill-changes.patch
deleted file mode 100644
index d5e107875e..0000000000
--- a/target/linux/sunxi/patches-3.14/230-net-rfkill-changes.patch
+++ /dev/null
@@ -1,148 +0,0 @@
-From 5f6f6af41e39677c9b722376a4088d10732cdd44 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Fri, 17 Jan 2014 14:47:26 +0800
-Subject: [PATCH] net: rfkill: gpio: fix gpio name buffer size off by 1
-
-snprintf should be passed the complete size of the buffer, including
-the space for '\0'. The previous code resulted in the *_reset and
-*_shutdown strings being truncated.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
----
- net/rfkill/rfkill-gpio.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/net/rfkill/rfkill-gpio.c
-+++ b/net/rfkill/rfkill-gpio.c
-@@ -26,6 +26,7 @@
- #include <linux/slab.h>
- #include <linux/acpi.h>
- #include <linux/gpio/consumer.h>
-+#include <linux/of_gpio.h>
-
- #include <linux/rfkill-gpio.h>
-
-@@ -39,6 +40,7 @@ struct rfkill_gpio_data {
- char *reset_name;
- char *shutdown_name;
- struct clk *clk;
-+ int clk_frequency;
-
- bool clk_enabled;
- };
-@@ -51,15 +53,15 @@ static int rfkill_gpio_set_power(void *d
- gpiod_set_value(rfkill->shutdown_gpio, 0);
- gpiod_set_value(rfkill->reset_gpio, 0);
- if (!IS_ERR(rfkill->clk) && rfkill->clk_enabled)
-- clk_disable(rfkill->clk);
-+ clk_disable_unprepare(rfkill->clk);
- } else {
- if (!IS_ERR(rfkill->clk) && !rfkill->clk_enabled)
-- clk_enable(rfkill->clk);
-+ clk_prepare_enable(rfkill->clk);
- gpiod_set_value(rfkill->reset_gpio, 1);
- gpiod_set_value(rfkill->shutdown_gpio, 1);
- }
-
-- rfkill->clk_enabled = blocked;
-+ rfkill->clk_enabled = !blocked;
-
- return 0;
- }
-@@ -83,6 +85,19 @@ static int rfkill_gpio_acpi_probe(struct
- return 0;
- }
-
-+static int rfkill_gpio_dt_probe(struct device *dev,
-+ struct rfkill_gpio_data *rfkill)
-+{
-+ struct device_node * np = dev->of_node;
-+
-+ rfkill->name = np->name;
-+ of_property_read_string(np, "rfkill-name", &rfkill->name);
-+ of_property_read_u32(np, "rfkill-type", &rfkill->type);
-+ of_property_read_u32(np, "clock-frequency", &rfkill->clk_frequency);
-+
-+ return 0;
-+}
-+
- static int rfkill_gpio_probe(struct platform_device *pdev)
- {
- struct rfkill_gpio_platform_data *pdata = pdev->dev.platform_data;
-@@ -100,6 +115,10 @@ static int rfkill_gpio_probe(struct plat
- ret = rfkill_gpio_acpi_probe(&pdev->dev, rfkill);
- if (ret)
- return ret;
-+ } else if (&pdev->dev.of_node) {
-+ ret = rfkill_gpio_dt_probe(&pdev->dev, rfkill);
-+ if (ret)
-+ return ret;
- } else if (pdata) {
- clk_name = pdata->power_clk_name;
- rfkill->name = pdata->name;
-@@ -117,10 +136,12 @@ static int rfkill_gpio_probe(struct plat
- if (!rfkill->shutdown_name)
- return -ENOMEM;
-
-- snprintf(rfkill->reset_name, len + 6 , "%s_reset", rfkill->name);
-- snprintf(rfkill->shutdown_name, len + 9, "%s_shutdown", rfkill->name);
-+ snprintf(rfkill->reset_name, len + 7 , "%s_reset", rfkill->name);
-+ snprintf(rfkill->shutdown_name, len + 10, "%s_shutdown", rfkill->name);
-
- rfkill->clk = devm_clk_get(&pdev->dev, clk_name);
-+ if (!IS_ERR(rfkill->clk) && rfkill->clk_frequency > 0)
-+ clk_set_rate(rfkill->clk, rfkill->clk_frequency);
-
- gpio = devm_gpiod_get_index(&pdev->dev, rfkill->reset_name, 0);
- if (!IS_ERR(gpio)) {
-@@ -189,6 +210,11 @@ static const struct acpi_device_id rfkil
- { },
- };
-
-+static const struct of_device_id rfkill_of_match[] = {
-+ { .compatible = "rfkill-gpio", },
-+ {},
-+};
-+
- static struct platform_driver rfkill_gpio_driver = {
- .probe = rfkill_gpio_probe,
- .remove = rfkill_gpio_remove,
-@@ -196,6 +222,7 @@ static struct platform_driver rfkill_gpi
- .name = "rfkill_gpio",
- .owner = THIS_MODULE,
- .acpi_match_table = ACPI_PTR(rfkill_acpi_match),
-+ .of_match_table = of_match_ptr(rfkill_of_match),
- },
- };
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/rfkill/rfkill-gpio.txt
-@@ -0,0 +1,28 @@
-+GPIO controlled RFKILL devices
-+
-+Required properties:
-+- compatible : Must be "rfkill-gpio".
-+- rfkill-name : Name of RFKILL device
-+- rfkill-type : Type of RFKILL device: 1 for WiFi, 2 for BlueTooth
-+- NAME_shutdown-gpios : GPIO phandle to shutdown control
-+ (phandle must be the second)
-+- NAME_reset-gpios : GPIO phandle to reset control
-+
-+NAME must match the rfkill-name property. NAME_shutdown-gpios or
-+NAME_reset-gpios, or both, must be defined.
-+
-+Optional properties:
-+- clocks : phandle to clock to enable/disable
-+- clock-frequency : clock rate to set for the given clock
-+
-+Example:
-+
-+ rfkill_bt: rfkill@0 {
-+ compatible = "rfkill-gpio";
-+ rfkill-name = "bluetooth";
-+ rfkill-type = <2>;
-+ bluetooth_shutdown-gpios = <0>, <&pio 7 18 0>;
-+ bluetooth_reset-gpios = <&pio 7 24 0>;
-+ clocks = <&clk_out_a>;
-+ clock-frequency = <32678>;
-+ };
diff --git a/target/linux/sunxi/patches-3.14/231-1-brcmfmac-fix-sdio-sending.patch b/target/linux/sunxi/patches-3.14/231-1-brcmfmac-fix-sdio-sending.patch
deleted file mode 100644
index 7a8715ade4..0000000000
--- a/target/linux/sunxi/patches-3.14/231-1-brcmfmac-fix-sdio-sending.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From df25859babd9c164a61e86d953d5c88400009a14 Mon Sep 17 00:00:00 2001
-From: Hante Meuleman <meuleman@broadcom.com>
-Date: Wed, 29 Jan 2014 15:32:16 +0100
-Subject: [PATCH] brcmfmac: fix sdio sending of large buffers.
-
-the function brcmf_sdiod_ramrw is supposed to be able to send
-large blobs of data. However inside the loop the skb->len field
-did not correctly get reset each round. As a result only small
-blobs could be sent. This patch fixes this problem.
-
-Reviewed-by: Arend Van Spriel <arend@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: John W. Linville <linville@tuxdriver.com>
----
- drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-@@ -827,7 +827,7 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev
- }
- if (!write)
- memcpy(data, pkt->data, dsize);
-- skb_trim(pkt, dsize);
-+ skb_trim(pkt, 0);
-
- /* Adjust for next transfer (if any) */
- size -= dsize;
diff --git a/target/linux/sunxi/patches-3.14/231-2-brcmfmac-fix-use-of-skb-ctrlbuf-in-SDIO.patch b/target/linux/sunxi/patches-3.14/231-2-brcmfmac-fix-use-of-skb-ctrlbuf-in-SDIO.patch
deleted file mode 100644
index 27d037c44e..0000000000
--- a/target/linux/sunxi/patches-3.14/231-2-brcmfmac-fix-use-of-skb-ctrlbuf-in-SDIO.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From 3eee5fd6d045dc744f98fd684258e3fdfa667fd6 Mon Sep 17 00:00:00 2001
-From: Arend van Spriel <arend@broadcom.com>
-Date: Tue, 25 Feb 2014 20:30:27 +0100
-Subject: [PATCH] brcmfmac: fix use of skb control buffer in SDIO driver part
-
-The SDIO driver has a 16-bit field defined in the skbuff control buffer.
-However, it is accessed as a u32 overwriting other control info. Another
-issue is that the field is not initialized for networking packets, but
-the control buffer content is unspecified as other networking layers can
-use it.
-
-Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
-Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
-Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
-Signed-off-by: Arend van Spriel <arend@broadcom.com>
-Signed-off-by: John W. Linville <linville@tuxdriver.com>
----
- drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 10 ++++++----
- 1 file changed, 6 insertions(+), 4 deletions(-)
-
---- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
-+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
-@@ -1955,7 +1955,7 @@ static int brcmf_sdio_txpkt_prep_sg(stru
- memcpy(pkt_pad->data,
- pkt->data + pkt->len - tail_chop,
- tail_chop);
-- *(u32 *)(pkt_pad->cb) = ALIGN_SKB_FLAG + tail_chop;
-+ *(u16 *)(pkt_pad->cb) = ALIGN_SKB_FLAG + tail_chop;
- skb_trim(pkt, pkt->len - tail_chop);
- skb_trim(pkt_pad, tail_pad + tail_chop);
- __skb_queue_after(pktq, pkt, pkt_pad);
-@@ -2003,7 +2003,7 @@ brcmf_sdio_txpkt_prep(struct brcmf_sdio
- * already properly aligned and does not
- * need an sdpcm header.
- */
-- if (*(u32 *)(pkt_next->cb) & ALIGN_SKB_FLAG)
-+ if (*(u16 *)(pkt_next->cb) & ALIGN_SKB_FLAG)
- continue;
-
- /* align packet data pointer */
-@@ -2067,11 +2067,11 @@ brcmf_sdio_txpkt_postp(struct brcmf_sdio
- u8 *hdr;
- u32 dat_offset;
- u16 tail_pad;
-- u32 dummy_flags, chop_len;
-+ u16 dummy_flags, chop_len;
- struct sk_buff *pkt_next, *tmp, *pkt_prev;
-
- skb_queue_walk_safe(pktq, pkt_next, tmp) {
-- dummy_flags = *(u32 *)(pkt_next->cb);
-+ dummy_flags = *(u16 *)(pkt_next->cb);
- if (dummy_flags & ALIGN_SKB_FLAG) {
- chop_len = dummy_flags & ALIGN_SKB_CHOP_LEN_MASK;
- if (chop_len) {
-@@ -2554,6 +2554,8 @@ static int brcmf_sdio_bus_txdata(struct
-
- /* Priority based enq */
- spin_lock_irqsave(&bus->txqlock, flags);
-+ /* reset bus_flags in packet cb */
-+ *(u16 *)(pkt->cb) = 0;
- if (!brcmf_c_prec_enq(bus->sdiodev->dev, &bus->txq, pkt, prec)) {
- skb_pull(pkt, bus->tx_hdrlen);
- brcmf_err("out of bus->txq !!!\n");
diff --git a/target/linux/sunxi/patches-3.14/232-1-dt-sun7i-add-wifi-to-cubietruck.patch b/target/linux/sunxi/patches-3.14/232-1-dt-sun7i-add-wifi-to-cubietruck.patch
deleted file mode 100644
index 4b19579346..0000000000
--- a/target/linux/sunxi/patches-3.14/232-1-dt-sun7i-add-wifi-to-cubietruck.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From 3e7fc7d394db0783996519f2d5affde5152a628e Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Thu, 26 Dec 2013 17:14:33 +0800
-Subject: [PATCH] ARM: dts: sun7i: add WiFi module to Cubietruck DTS
-
-The CubieTruck has an AMPAK AP6210 WiFi+Bluetooth module. The WiFi
-part is a BCM43362 IC connected to MMC2 in the A20 SoC via SDIO.
-The IC also takes a 32.768 KHz low power clock input, and a power
-enable signal via GPIO.
-
-The WiFi module supports out-of-band interrupt signaling via GPIO,
-but this is not supported in this patch.
----
- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 47 ++++++++++++++++++++++++++++++
- 1 file changed, 47 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-@@ -28,6 +28,23 @@
- status = "okay";
- };
-
-+ mmc3: mmc@01c12000 {
-+ pinctrl-names = "default", "default";
-+ pinctrl-0 = <&mmc3_pins_a>;
-+ pinctrl-1 = <&wifi_host_wake_pin>;
-+ vmmc-supply = <&reg_vmmc3>;
-+ non-removable;
-+ status = "okay";
-+
-+ brcmf: bcrmf@0 {
-+ /* out of band interrupt not working */
-+ /* compatible = "broadcom,bcm43362"; */
-+ interrupt-parent = <&pio>;
-+ interrupts = <10 2>; /* EINT10 */
-+ status = "okay";
-+ };
-+ };
-+
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <&reg_usb1_vbus>;
- usb2_vbus-supply = <&reg_usb2_vbus>;
-@@ -56,6 +73,18 @@
- };
-
- pinctrl@01c20800 {
-+ mmc3_pins_a: mmc3@0 {
-+ /* AP6210 requires pull-up */
-+ allwinner,pull = <1>;
-+ };
-+
-+ vmmc3_pin_cubietruck: vmmc3_pin@0 {
-+ allwinner,pins = "PH9";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
-+
- ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
- allwinner,pins = "PH12";
- allwinner,function = "gpio_out";
-@@ -99,6 +128,13 @@
-
- /include/ "x-powers-axp209.dtsi"
- };
-+
-+ wifi_host_wake_pin: wifi_host_wake_pin@0 {
-+ allwinner,pins = "PH10";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
- };
-
- i2c0: i2c@01c2ac00 {
-@@ -189,4 +225,15 @@
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
- };
-+
-+ reg_vmmc3: vmmc3 {
-+ compatible = "regulator-fixed";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&vmmc3_pin_cubietruck>;
-+ regulator-name = "vmmc3";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ enable-active-high;
-+ gpio = <&pio 7 9 0>;
-+ };
- };
diff --git a/target/linux/sunxi/patches-3.14/232-2-dt-sun7i-add-bluetooth-to-cubietruck.patch b/target/linux/sunxi/patches-3.14/232-2-dt-sun7i-add-bluetooth-to-cubietruck.patch
deleted file mode 100644
index ce1858c893..0000000000
--- a/target/linux/sunxi/patches-3.14/232-2-dt-sun7i-add-bluetooth-to-cubietruck.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 7ed66f828ad1ae46226ad7c1b56466d5ae6d67b9 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Thu, 26 Dec 2013 17:15:47 +0800
-Subject: [PATCH] ARM: dts: sun7i: add bluetooth module to CubieTruck DTS
-
-The CubieTruck has an AMPAK AP6210 WiFi+Bluetooth module. The
-Bluetooth part is a BCM20710 IC connected to UART2 in the A20
-SoC. The IC also takes a 32.768 KHz low power clock input, a power
-enable signal and a wake signal via GPIO.
-
-The Bluetooth module supports out-of-band interrupt signaling via
-GPIO, but this is not supported in this patch.
----
- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 36 ++++++++++++++++++++++++++++++
- 1 file changed, 36 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-@@ -135,6 +135,20 @@
- allwinner,drive = <0>;
- allwinner,pull = <0>;
- };
-+
-+ bt_pwr_pin: bt_pwr_pin@0 {
-+ allwinner,pins = "PH18";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
-+
-+ bt_wake_pin: bt_wake_pin@0 {
-+ allwinner,pins = "PH24";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
- };
-
- i2c0: i2c@01c2ac00 {
-@@ -167,6 +181,12 @@
- };
- };
-
-+ uart2: serial@01c28800 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart2_pins_a>;
-+ status = "okay";
-+ };
-+
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
-@@ -236,4 +256,20 @@
- enable-active-high;
- gpio = <&pio 7 9 0>;
- };
-+
-+ rfkill-switches {
-+ compatible = "simple-bus";
-+ pinctrl-names = "default";
-+
-+ rfkill_bt {
-+ compatible = "rfkill-gpio";
-+ pinctrl-0 = <&bt_pwr_pin>, <&clk_out_a_pins_a>;
-+ rfkill-name = "bt";
-+ rfkill-type = <2>;
-+ bt_shutdown-gpios = <0>, <&pio 7 18 0>; /* PH18 */
-+ bt_reset-gpios = <&pio 7 24 0>; /* PH24 */
-+ clocks = <&clk_out_a>;
-+ clock-frequency = <32768>;
-+ };
-+ };
- };
diff --git a/target/linux/sunxi/patches-3.14/250-pwm-add-driver.patch b/target/linux/sunxi/patches-3.14/250-pwm-add-driver.patch
deleted file mode 100644
index d4af96faef..0000000000
--- a/target/linux/sunxi/patches-3.14/250-pwm-add-driver.patch
+++ /dev/null
@@ -1,369 +0,0 @@
---- a/drivers/pwm/Kconfig
-+++ b/drivers/pwm/Kconfig
-@@ -187,6 +187,15 @@ config PWM_SPEAR
- To compile this driver as a module, choose M here: the module
- will be called pwm-spear.
-
-+config PWM_SUNXI
-+ tristate "Allwinner PWM support"
-+ depends on ARCH_SUNXI || COMPILE_TEST
-+ help
-+ Generic PWM framework driver for Allwinner SoCs.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called pwm-sunxi.
-+
- config PWM_TEGRA
- tristate "NVIDIA Tegra PWM support"
- depends on ARCH_TEGRA
---- a/drivers/pwm/Makefile
-+++ b/drivers/pwm/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_PWM_PXA) += pwm-pxa.o
- obj-$(CONFIG_PWM_RENESAS_TPU) += pwm-renesas-tpu.o
- obj-$(CONFIG_PWM_SAMSUNG) += pwm-samsung.o
- obj-$(CONFIG_PWM_SPEAR) += pwm-spear.o
-+obj-$(CONFIG_PWM_SUNXI) += pwm-sunxi.o
- obj-$(CONFIG_PWM_TEGRA) += pwm-tegra.o
- obj-$(CONFIG_PWM_TIECAP) += pwm-tiecap.o
- obj-$(CONFIG_PWM_TIEHRPWM) += pwm-tiehrpwm.o
---- /dev/null
-+++ b/drivers/pwm/pwm-sunxi.c
-@@ -0,0 +1,338 @@
-+/*
-+ * Driver for Allwinner Pulse Width Modulation Controller
-+ *
-+ * Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com>
-+ *
-+ * Licensed under GPLv2.
-+ */
-+
-+#include <linux/bitops.h>
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include <linux/pwm.h>
-+#include <linux/module.h>
-+#include <linux/mutex.h>
-+#include <linux/slab.h>
-+
-+#define PWM_CTRL_REG 0x0
-+
-+#define PWM_CH_PRD_BASE 0x4
-+#define PWM_CH_PRD_OFF 0x4
-+#define PWM_CH_PRD(x) (PWM_CH_PRD_BASE + PWM_CH_PRD_OFF * (x))
-+
-+#define PWMCH_OFFSET 15
-+#define PWM_PRESCAL_MASK GENMASK(3, 0)
-+#define PWM_PRESCAL_OFF 0
-+#define PWM_EN BIT(4)
-+#define PWM_ACT_STATE BIT(5)
-+#define PWM_CLK_GATING BIT(6)
-+#define PWM_MODE BIT(7)
-+#define PWM_PULSE BIT(8)
-+#define PWM_BYPASS BIT(9)
-+
-+#define PWM_RDY_BASE 28
-+#define PWM_RDY_OFF 1
-+#define PWM_RDY(x) BIT(PWM_RDY_BASE + PWM_RDY_OFF * (x))
-+
-+#define PWM_PRD_ACT_MASK GENMASK(7, 0)
-+#define PWM_PRD(x) ((x - 1) << 16)
-+#define PWM_PRD_MASK GENMASK(7, 0)
-+
-+#define BIT_CH(bit, chan) (bit << (chan * PWMCH_OFFSET))
-+
-+u32 prescal_table[] = { 120, 180, 240, 360, 480, 0, 0, 0,
-+ 12000, 24000, 36000, 48000, 72000,
-+ 0, 0, 1 };
-+
-+struct sunxi_pwm_data {
-+ bool has_rdy;
-+};
-+
-+struct sunxi_pwm_chip {
-+ struct pwm_chip chip;
-+ struct clk *clk;
-+ void __iomem *base;
-+ struct mutex ctrl_lock;
-+ const struct sunxi_pwm_data *data;
-+};
-+
-+#define to_sunxi_pwm_chip(chip) container_of(chip, struct sunxi_pwm_chip, chip)
-+
-+static inline u32 sunxi_pwm_readl(struct sunxi_pwm_chip *chip,
-+ unsigned long offset)
-+{
-+ return readl(chip->base + offset);
-+}
-+
-+static inline void sunxi_pwm_writel(struct sunxi_pwm_chip *chip,
-+ unsigned long offset, unsigned long val)
-+{
-+ writel(val, chip->base + offset);
-+}
-+
-+static int sunxi_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
-+ int duty_ns, int period_ns)
-+{
-+ struct sunxi_pwm_chip *sunxi_pwm = to_sunxi_pwm_chip(chip);
-+ u32 clk_rate, prd, dty;
-+ u64 div;
-+ u32 val, clk_gate;
-+ int i, ret;
-+
-+ clk_rate = clk_get_rate(sunxi_pwm->clk);
-+
-+ /* First, test without any divider */
-+ i = PWM_PRESCAL_MASK;
-+ div = clk_rate * period_ns;
-+ do_div(div, 1000000000);
-+ if (div > PWM_PRD_MASK) {
-+ /* Then go up from the first divider */
-+ for (i = 0; i < PWM_PRESCAL_MASK; i++) {
-+ if (!prescal_table[i])
-+ continue;
-+ div = clk_rate / prescal_table[i];
-+ div = div * period_ns;
-+ do_div(div, 1000000000);
-+ if (div <= PWM_PRD_MASK)
-+ break;
-+ }
-+ }
-+
-+ if (div > PWM_PRD_MASK) {
-+ dev_err(chip->dev, "prescaler exceeds the maximum value\n");
-+ return -EINVAL;
-+ }
-+
-+ prd = div;
-+ div *= duty_ns;
-+ do_div(div, period_ns);
-+ dty = div;
-+
-+ ret = clk_prepare_enable(sunxi_pwm->clk);
-+ if (ret) {
-+ dev_err(chip->dev, "failed to enable PWM clock\n");
-+ return ret;
-+ }
-+
-+ mutex_lock(&sunxi_pwm->ctrl_lock);
-+ val = sunxi_pwm_readl(sunxi_pwm, PWM_CTRL_REG);
-+
-+ if (sunxi_pwm->data->has_rdy && (val & PWM_RDY(pwm->hwpwm))) {
-+ mutex_unlock(&sunxi_pwm->ctrl_lock);
-+ clk_disable_unprepare(sunxi_pwm->clk);
-+ return -EBUSY;
-+ }
-+
-+ clk_gate = val & BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
-+ if (clk_gate) {
-+ val &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
-+ sunxi_pwm_writel(sunxi_pwm, PWM_CTRL_REG, val);
-+ }
-+
-+ val = sunxi_pwm_readl(sunxi_pwm, PWM_CTRL_REG);
-+ val &= ~BIT_CH(PWM_PRESCAL_MASK, pwm->hwpwm);
-+ val |= i;
-+ sunxi_pwm_writel(sunxi_pwm, PWM_CTRL_REG, val);
-+
-+ sunxi_pwm_writel(sunxi_pwm, PWM_CH_PRD(pwm->hwpwm), dty | PWM_PRD(prd));
-+
-+ if (clk_gate) {
-+ val = sunxi_pwm_readl(sunxi_pwm, PWM_CTRL_REG);
-+ val |= clk_gate;
-+ sunxi_pwm_writel(sunxi_pwm, PWM_CTRL_REG, val);
-+ }
-+
-+ mutex_unlock(&sunxi_pwm->ctrl_lock);
-+ clk_disable_unprepare(sunxi_pwm->clk);
-+
-+ return 0;
-+}
-+
-+static int sunxi_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
-+ enum pwm_polarity polarity)
-+{
-+ struct sunxi_pwm_chip *sunxi_pwm = to_sunxi_pwm_chip(chip);
-+ u32 val;
-+ int ret;
-+
-+ ret = clk_prepare_enable(sunxi_pwm->clk);
-+ if (ret) {
-+ dev_err(chip->dev, "failed to enable PWM clock\n");
-+ return ret;
-+ }
-+
-+ mutex_lock(&sunxi_pwm->ctrl_lock);
-+ val = sunxi_pwm_readl(sunxi_pwm, PWM_CTRL_REG);
-+
-+ if (polarity != PWM_POLARITY_NORMAL)
-+ val &= ~BIT_CH(PWM_ACT_STATE, pwm->hwpwm);
-+ else
-+ val |= BIT_CH(PWM_ACT_STATE, pwm->hwpwm);
-+
-+
-+ sunxi_pwm_writel(sunxi_pwm, PWM_CTRL_REG, val);
-+
-+ mutex_unlock(&sunxi_pwm->ctrl_lock);
-+ clk_disable_unprepare(sunxi_pwm->clk);
-+
-+ return 0;
-+}
-+
-+static int sunxi_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
-+{
-+ struct sunxi_pwm_chip *sunxi_pwm = to_sunxi_pwm_chip(chip);
-+ u32 val;
-+ int ret;
-+
-+ ret = clk_prepare_enable(sunxi_pwm->clk);
-+ if (ret) {
-+ dev_err(chip->dev, "failed to enable PWM clock\n");
-+ return ret;
-+ }
-+
-+ mutex_lock(&sunxi_pwm->ctrl_lock);
-+ val = sunxi_pwm_readl(sunxi_pwm, PWM_CTRL_REG);
-+ val |= BIT_CH(PWM_EN, pwm->hwpwm);
-+ val |= BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
-+ sunxi_pwm_writel(sunxi_pwm, PWM_CTRL_REG, val);
-+ mutex_unlock(&sunxi_pwm->ctrl_lock);
-+
-+ return 0;
-+}
-+
-+static void sunxi_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
-+{
-+ struct sunxi_pwm_chip *sunxi_pwm = to_sunxi_pwm_chip(chip);
-+ u32 val;
-+
-+ mutex_lock(&sunxi_pwm->ctrl_lock);
-+ val = sunxi_pwm_readl(sunxi_pwm, PWM_CTRL_REG);
-+ val &= ~BIT_CH(PWM_EN, pwm->hwpwm);
-+ val &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
-+ sunxi_pwm_writel(sunxi_pwm, PWM_CTRL_REG, val);
-+ mutex_unlock(&sunxi_pwm->ctrl_lock);
-+
-+ clk_disable_unprepare(sunxi_pwm->clk);
-+}
-+
-+static const struct pwm_ops sunxi_pwm_ops = {
-+ .config = sunxi_pwm_config,
-+ .set_polarity = sunxi_pwm_set_polarity,
-+ .enable = sunxi_pwm_enable,
-+ .disable = sunxi_pwm_disable,
-+ .owner = THIS_MODULE,
-+};
-+
-+static const struct sunxi_pwm_data sunxi_pwm_data_a10 = {
-+ .has_rdy = false,
-+};
-+
-+static const struct sunxi_pwm_data sunxi_pwm_data_a20 = {
-+ .has_rdy = true,
-+};
-+
-+static const struct of_device_id sunxi_pwm_dt_ids[] = {
-+ {
-+ .compatible = "allwinner,sun4i-a10-pwm",
-+ .data = &sunxi_pwm_data_a10,
-+ }, {
-+ .compatible = "allwinner,sun7i-a20-pwm",
-+ .data = &sunxi_pwm_data_a20,
-+ }, {
-+ /* sentinel */
-+ },
-+};
-+MODULE_DEVICE_TABLE(of, sunxi_pwm_dt_ids);
-+
-+static int sunxi_pwm_probe(struct platform_device *pdev)
-+{
-+ struct sunxi_pwm_chip *sunxi_pwm;
-+ struct resource *res;
-+ int ret;
-+
-+ const struct of_device_id *match;
-+
-+ match = of_match_device(sunxi_pwm_dt_ids, &pdev->dev);
-+ if (!match || !match->data)
-+ return -ENODEV;
-+
-+ sunxi_pwm = devm_kzalloc(&pdev->dev, sizeof(*sunxi_pwm), GFP_KERNEL);
-+ if (!sunxi_pwm)
-+ return -ENOMEM;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ sunxi_pwm->base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(sunxi_pwm->base))
-+ return PTR_ERR(sunxi_pwm->base);
-+
-+ sunxi_pwm->clk = devm_clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(sunxi_pwm->clk))
-+ return PTR_ERR(sunxi_pwm->clk);
-+
-+ sunxi_pwm->chip.dev = &pdev->dev;
-+ sunxi_pwm->chip.ops = &sunxi_pwm_ops;
-+
-+ sunxi_pwm->chip.base = -1;
-+ sunxi_pwm->chip.npwm = 2;
-+ sunxi_pwm->chip.can_sleep = true;
-+ sunxi_pwm->chip.of_xlate = of_pwm_xlate_with_flags;
-+ sunxi_pwm->chip.of_pwm_n_cells = 3;
-+ sunxi_pwm->data = match->data;
-+
-+ mutex_init(&sunxi_pwm->ctrl_lock);
-+
-+ ret = clk_prepare_enable(sunxi_pwm->clk);
-+ if (ret) {
-+ dev_err(&pdev->dev, "failed to enable PWM clock\n");
-+ goto error;
-+ }
-+
-+ /* By default, the polarity is inversed, set it to normal */
-+ sunxi_pwm_writel(sunxi_pwm, PWM_CTRL_REG,
-+ BIT_CH(PWM_ACT_STATE, 0) |
-+ BIT_CH(PWM_ACT_STATE, 1));
-+ clk_disable_unprepare(sunxi_pwm->clk);
-+
-+ ret = pwmchip_add(&sunxi_pwm->chip);
-+ if (ret < 0) {
-+ dev_err(&pdev->dev, "failed to add PWM chip %d\n", ret);
-+ goto error;
-+ }
-+
-+ platform_set_drvdata(pdev, sunxi_pwm);
-+
-+ return ret;
-+
-+error:
-+ mutex_destroy(&sunxi_pwm->ctrl_lock);
-+ clk_disable_unprepare(sunxi_pwm->clk);
-+ return ret;
-+}
-+
-+static int sunxi_pwm_remove(struct platform_device *pdev)
-+{
-+ struct sunxi_pwm_chip *sunxi_pwm = platform_get_drvdata(pdev);
-+
-+ mutex_destroy(&sunxi_pwm->ctrl_lock);
-+
-+ return pwmchip_remove(&sunxi_pwm->chip);
-+}
-+
-+static struct platform_driver sunxi_pwm_driver = {
-+ .driver = {
-+ .name = "sunxi-pwm",
-+ .of_match_table = sunxi_pwm_dt_ids,
-+ },
-+ .probe = sunxi_pwm_probe,
-+ .remove = sunxi_pwm_remove,
-+};
-+module_platform_driver(sunxi_pwm_driver);
-+
-+MODULE_ALIAS("platform:sunxi-pwm");
-+MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>");
-+MODULE_DESCRIPTION("Allwinner PWM driver");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/sunxi/patches-3.14/251-1-dt-sun4i-add-pinmux-for-pwm.patch b/target/linux/sunxi/patches-3.14/251-1-dt-sun4i-add-pinmux-for-pwm.patch
deleted file mode 100644
index 5eb30b1a63..0000000000
--- a/target/linux/sunxi/patches-3.14/251-1-dt-sun4i-add-pinmux-for-pwm.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 1d8e9db920352680e9091ec5d2873e90a4a53214 Mon Sep 17 00:00:00 2001
-From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-Date: Mon, 28 Apr 2014 18:17:10 +0200
-Subject: [PATCH] ARM: sun4i: dt: add pinmux configuration for the PWM
-
-Add the pinctrl descriptions for both PWM channels of the Allwinner A10.
-
-Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun4i-a10.dtsi | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/arch/arm/boot/dts/sun4i-a10.dtsi
-+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
-@@ -521,6 +521,20 @@
- #size-cells = <0>;
- #gpio-cells = <3>;
-
-+ pwm0_pins_a: pwm0@0 {
-+ allwinner,pins = "PB2";
-+ allwinner,function = "pwm";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
-+
-+ pwm1_pins_a: pwm1@0 {
-+ allwinner,pins = "PI3";
-+ allwinner,function = "pwm";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
-+
- uart0_pins_a: uart0@0 {
- allwinner,pins = "PB22", "PB23";
- allwinner,function = "uart0";
diff --git a/target/linux/sunxi/patches-3.14/251-2-dt-sun7i-add-pinmux-for-pwm.patch b/target/linux/sunxi/patches-3.14/251-2-dt-sun7i-add-pinmux-for-pwm.patch
deleted file mode 100644
index 12062376ec..0000000000
--- a/target/linux/sunxi/patches-3.14/251-2-dt-sun7i-add-pinmux-for-pwm.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From cf34231072d53e643d6ef1baa95a8e9df644542e Mon Sep 17 00:00:00 2001
-From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-Date: Mon, 28 Apr 2014 18:17:12 +0200
-Subject: [PATCH] ARM: sun7i: dt: add pinmux configuration for the PWM
-
-Add the pinctrl descriptions for both PWM channels of the Allwinner A20.
-
-Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun7i-a20.dtsi | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -584,6 +584,20 @@
- #size-cells = <0>;
- #gpio-cells = <3>;
-
-+ pwm0_pins_a: pwm0@0 {
-+ allwinner,pins = "PB2";
-+ allwinner,function = "pwm";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
-+
-+ pwm1_pins_a: pwm1@0 {
-+ allwinner,pins = "PI3";
-+ allwinner,function = "pwm";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
-+
- uart0_pins_a: uart0@0 {
- allwinner,pins = "PB22", "PB23";
- allwinner,function = "uart0";
diff --git a/target/linux/sunxi/patches-3.14/252-1-dt-sun4i-add-pwm-support.patch b/target/linux/sunxi/patches-3.14/252-1-dt-sun4i-add-pwm-support.patch
deleted file mode 100644
index 4b16ab2035..0000000000
--- a/target/linux/sunxi/patches-3.14/252-1-dt-sun4i-add-pwm-support.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 25a4e0f1ac49c9ecafeba0d034806e25c491f012 Mon Sep 17 00:00:00 2001
-From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-Date: Mon, 28 Apr 2014 18:17:11 +0200
-Subject: [PATCH] ARM: sun4i: dt: add PWM support
-
-Add the PWM bindings for the Allwinner A10.
-
-Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun4i-a10.dtsi | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm/boot/dts/sun4i-a10.dtsi
-+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
-@@ -628,6 +628,14 @@
- status = "disabled";
- };
-
-+ pwm: pwm@01c20e00 {
-+ compatible = "allwinner,sun4i-a10-pwm";
-+ reg = <0x01c20e00 0xc>;
-+ clocks = <&osc24M>;
-+ #pwm-cells = <3>;
-+ status = "disabled";
-+ };
-+
- sid: eeprom@01c23800 {
- compatible = "allwinner,sun4i-sid";
- reg = <0x01c23800 0x10>;
diff --git a/target/linux/sunxi/patches-3.14/252-2-dt-sun7i-add-pwm-support.patch b/target/linux/sunxi/patches-3.14/252-2-dt-sun7i-add-pwm-support.patch
deleted file mode 100644
index dc9636b904..0000000000
--- a/target/linux/sunxi/patches-3.14/252-2-dt-sun7i-add-pwm-support.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 216a4cc15c24d46a5b50b3f9a224576a69c1a83e Mon Sep 17 00:00:00 2001
-From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-Date: Mon, 28 Apr 2014 18:17:13 +0200
-Subject: [PATCH] ARM: sun7i: dt: add PWM support
-
-Add the PWM bindings for the Allwinner A20.
-
-Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -764,6 +764,14 @@
- status = "disabled";
- };
-
-+ pwm: pwm@01c20e00 {
-+ compatible = "allwinner,sun7i-a20-pwm";
-+ reg = <0x01c20e00 0xc>;
-+ clocks = <&osc24M>;
-+ #pwm-cells = <3>;
-+ status = "disabled";
-+ };
-+
- sid: eeprom@01c23800 {
- compatible = "allwinner,sun7i-a20-sid";
- reg = <0x01c23800 0x200>;
diff --git a/target/linux/sunxi/patches-3.14/260-dt-sun7i-enable-arm-pmu.patch b/target/linux/sunxi/patches-3.14/260-dt-sun7i-enable-arm-pmu.patch
deleted file mode 100644
index 4f703e7811..0000000000
--- a/target/linux/sunxi/patches-3.14/260-dt-sun7i-enable-arm-pmu.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 531f223d1426a826c7da4908e1a5e8eb3d40d6ed Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Thu, 17 Apr 2014 21:54:41 +0200
-Subject: [PATCH] ARM: sun7i: Add ARM PMU in A20 DTSI
-
-Enable the performance monitoring unit found in the A20 SoCs.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Reviewed-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun7i-a20.dtsi | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -57,6 +57,12 @@
- <1 10 0xf08>;
- };
-
-+ pmu {
-+ compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
-+ interrupts = <0 120 4>,
-+ <0 121 4>;
-+ };
-+
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
diff --git a/target/linux/sunxi/patches-3.14/270-dt-sun7i-add-ss-to-a20.patch b/target/linux/sunxi/patches-3.14/270-dt-sun7i-add-ss-to-a20.patch
deleted file mode 100644
index 11a6ed03f5..0000000000
--- a/target/linux/sunxi/patches-3.14/270-dt-sun7i-add-ss-to-a20.patch
+++ /dev/null
@@ -1,17 +0,0 @@
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -529,6 +529,14 @@
- status = "disabled";
- };
-
-+ crypto: crypto-engine@01c15000 {
-+ compatible = "allwinner,sun7i-a20-crypto";
-+ reg = <0x01c15000 0x1000>;
-+ interrupts = <0 86 4>;
-+ clocks = <&ahb_gates 5>, <&ss_clk>;
-+ clock-names = "ahb", "mod";
-+ };
-+
- spi2: spi@01c17000 {
- compatible = "allwinner,sun4i-a10-spi";
- reg = <0x01c17000 0x1000>;
diff --git a/target/linux/sunxi/patches-3.14/271-crypto-add-ss.patch b/target/linux/sunxi/patches-3.14/271-crypto-add-ss.patch
deleted file mode 100644
index a5e2d067a5..0000000000
--- a/target/linux/sunxi/patches-3.14/271-crypto-add-ss.patch
+++ /dev/null
@@ -1,1241 +0,0 @@
---- a/drivers/crypto/Kconfig
-+++ b/drivers/crypto/Kconfig
-@@ -419,4 +419,21 @@ config CRYPTO_DEV_MXS_DCP
- To compile this driver as a module, choose M here: the module
- will be called mxs-dcp.
-
-+config CRYPTO_DEV_SUNXI_SS
-+ tristate "Support for Allwinner Security System cryptographic accelerator"
-+ depends on ARCH_SUNXI
-+ select CRYPTO_MD5
-+ select CRYPTO_SHA1
-+ select CRYPTO_AES
-+ select CRYPTO_DES
-+ select CRYPTO_BLKCIPHER
-+ help
-+ Some Allwinner SoC have a crypto accelerator named
-+ Security System. Select this if you want to use it.
-+ The Security System handle AES/DES/3DES ciphers in CBC mode
-+ and SHA1 and MD5 hash algorithms.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called sunxi-ss.
-+
- endif # CRYPTO_HW
---- a/drivers/crypto/Makefile
-+++ b/drivers/crypto/Makefile
-@@ -23,3 +23,4 @@ obj-$(CONFIG_CRYPTO_DEV_SAHARA) += sahar
- obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
- obj-$(CONFIG_CRYPTO_DEV_TEGRA_AES) += tegra-aes.o
- obj-$(CONFIG_CRYPTO_DEV_UX500) += ux500/
-+obj-$(CONFIG_CRYPTO_DEV_SUNXI_SS) += sunxi-ss/
---- /dev/null
-+++ b/drivers/crypto/sunxi-ss/Makefile
-@@ -0,0 +1,2 @@
-+obj-$(CONFIG_CRYPTO_DEV_SUNXI_SS) += sunxi-ss.o
-+sunxi-ss-y += sunxi-ss-core.o sunxi-ss-hash.o sunxi-ss-cipher.o
---- /dev/null
-+++ b/drivers/crypto/sunxi-ss/sunxi-ss-cipher.c
-@@ -0,0 +1,461 @@
-+/*
-+ * sunxi-ss-cipher.c - hardware cryptographic accelerator for Allwinner A20 SoC
-+ *
-+ * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@gmail.com>
-+ *
-+ * This file add support for AES cipher with 128,192,256 bits
-+ * keysize in CBC mode.
-+ *
-+ * You could find the datasheet at
-+ * http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+#include "sunxi-ss.h"
-+
-+extern struct sunxi_ss_ctx *ss;
-+
-+static int sunxi_ss_cipher(struct ablkcipher_request *areq, u32 mode)
-+{
-+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
-+ struct sunxi_req_ctx *op = crypto_ablkcipher_ctx(tfm);
-+ const char *cipher_type;
-+
-+ cipher_type = crypto_tfm_alg_name(crypto_ablkcipher_tfm(tfm));
-+
-+ if (areq->nbytes == 0) {
-+ mutex_unlock(&ss->lock);
-+ return 0;
-+ }
-+
-+ if (areq->info == NULL) {
-+ dev_err(ss->dev, "ERROR: Empty IV\n");
-+ mutex_unlock(&ss->lock);
-+ return -EINVAL;
-+ }
-+
-+ if (areq->src == NULL || areq->dst == NULL) {
-+ dev_err(ss->dev, "ERROR: Some SGs are NULL\n");
-+ mutex_unlock(&ss->lock);
-+ return -EINVAL;
-+ }
-+
-+ if (strcmp("cbc(aes)", cipher_type) == 0) {
-+ op->mode |= SS_OP_AES | SS_CBC | SS_ENABLED | mode;
-+ return sunxi_ss_aes_poll(areq);
-+ }
-+ if (strcmp("cbc(des)", cipher_type) == 0) {
-+ op->mode = SS_OP_DES | SS_CBC | SS_ENABLED | mode;
-+ return sunxi_ss_des_poll(areq);
-+ }
-+ if (strcmp("cbc(des3_ede)", cipher_type) == 0) {
-+ op->mode = SS_OP_3DES | SS_CBC | SS_ENABLED | mode;
-+ return sunxi_ss_des_poll(areq);
-+ }
-+ dev_err(ss->dev, "ERROR: Cipher %s not handled\n", cipher_type);
-+ mutex_unlock(&ss->lock);
-+ return -EINVAL;
-+}
-+
-+int sunxi_ss_cipher_encrypt(struct ablkcipher_request *areq)
-+{
-+ return sunxi_ss_cipher(areq, SS_ENCRYPTION);
-+}
-+
-+int sunxi_ss_cipher_decrypt(struct ablkcipher_request *areq)
-+{
-+ return sunxi_ss_cipher(areq, SS_DECRYPTION);
-+}
-+
-+int sunxi_ss_cipher_init(struct crypto_tfm *tfm)
-+{
-+ struct sunxi_req_ctx *op = crypto_tfm_ctx(tfm);
-+
-+ mutex_lock(&ss->lock);
-+
-+ memset(op, 0, sizeof(struct sunxi_req_ctx));
-+ return 0;
-+}
-+
-+int sunxi_ss_aes_poll(struct ablkcipher_request *areq)
-+{
-+ u32 spaces;
-+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
-+ struct sunxi_req_ctx *op = crypto_ablkcipher_ctx(tfm);
-+ unsigned int ivsize = crypto_ablkcipher_ivsize(tfm);
-+ /* when activating SS, the default FIFO space is 32 */
-+ u32 rx_cnt = 32;
-+ u32 tx_cnt = 0;
-+ u32 v;
-+ int i;
-+ struct scatterlist *in_sg;
-+ struct scatterlist *out_sg;
-+ void *src_addr;
-+ void *dst_addr;
-+ unsigned int ileft = areq->nbytes;
-+ unsigned int oleft = areq->nbytes;
-+ unsigned int sgileft = areq->src->length;
-+ unsigned int sgoleft = areq->dst->length;
-+ unsigned int todo;
-+ u32 *src32;
-+ u32 *dst32;
-+
-+ in_sg = areq->src;
-+ out_sg = areq->dst;
-+ for (i = 0; i < op->keylen; i += 4)
-+ writel(*(op->key + i/4), ss->base + SS_KEY0 + i);
-+ if (areq->info != NULL) {
-+ for (i = 0; i < 4 && i < ivsize / 4; i++) {
-+ v = *(u32 *)(areq->info + i * 4);
-+ writel(v, ss->base + SS_IV0 + i * 4);
-+ }
-+ }
-+ writel(op->mode, ss->base + SS_CTL);
-+
-+ /* If we have only one SG, we can use kmap_atomic */
-+ if (sg_next(in_sg) == NULL && sg_next(out_sg) == NULL) {
-+ src_addr = kmap_atomic(sg_page(in_sg)) + in_sg->offset;
-+ if (src_addr == NULL) {
-+ dev_err(ss->dev, "kmap_atomic error for src SG\n");
-+ writel(0, ss->base + SS_CTL);
-+ mutex_unlock(&ss->lock);
-+ return -EINVAL;
-+ }
-+ dst_addr = kmap_atomic(sg_page(out_sg)) + out_sg->offset;
-+ if (dst_addr == NULL) {
-+ dev_err(ss->dev, "kmap_atomic error for dst SG\n");
-+ writel(0, ss->base + SS_CTL);
-+ kunmap_atomic(src_addr);
-+ mutex_unlock(&ss->lock);
-+ return -EINVAL;
-+ }
-+ src32 = (u32 *)src_addr;
-+ dst32 = (u32 *)dst_addr;
-+ ileft = areq->nbytes / 4;
-+ oleft = areq->nbytes / 4;
-+ i = 0;
-+ do {
-+ if (ileft > 0 && rx_cnt > 0) {
-+ todo = min(rx_cnt, ileft);
-+ ileft -= todo;
-+ do {
-+ writel_relaxed(*src32++,
-+ ss->base +
-+ SS_RXFIFO);
-+ todo--;
-+ } while (todo > 0);
-+ }
-+ if (tx_cnt > 0) {
-+ todo = min(tx_cnt, oleft);
-+ oleft -= todo;
-+ do {
-+ *dst32++ = readl_relaxed(ss->base +
-+ SS_TXFIFO);
-+ todo--;
-+ } while (todo > 0);
-+ }
-+ spaces = readl_relaxed(ss->base + SS_FCSR);
-+ rx_cnt = SS_RXFIFO_SPACES(spaces);
-+ tx_cnt = SS_TXFIFO_SPACES(spaces);
-+ } while (oleft > 0);
-+ writel(0, ss->base + SS_CTL);
-+ kunmap_atomic(src_addr);
-+ kunmap_atomic(dst_addr);
-+ mutex_unlock(&ss->lock);
-+ return 0;
-+ }
-+
-+ /* If we have more than one SG, we cannot use kmap_atomic since
-+ * we hold the mapping too long
-+ */
-+ src_addr = kmap(sg_page(in_sg)) + in_sg->offset;
-+ if (src_addr == NULL) {
-+ dev_err(ss->dev, "KMAP error for src SG\n");
-+ mutex_unlock(&ss->lock);
-+ return -EINVAL;
-+ }
-+ dst_addr = kmap(sg_page(out_sg)) + out_sg->offset;
-+ if (dst_addr == NULL) {
-+ kunmap(sg_page(in_sg));
-+ dev_err(ss->dev, "KMAP error for dst SG\n");
-+ mutex_unlock(&ss->lock);
-+ return -EINVAL;
-+ }
-+ src32 = (u32 *)src_addr;
-+ dst32 = (u32 *)dst_addr;
-+ ileft = areq->nbytes / 4;
-+ oleft = areq->nbytes / 4;
-+ sgileft = in_sg->length / 4;
-+ sgoleft = out_sg->length / 4;
-+ do {
-+ spaces = readl_relaxed(ss->base + SS_FCSR);
-+ rx_cnt = SS_RXFIFO_SPACES(spaces);
-+ tx_cnt = SS_TXFIFO_SPACES(spaces);
-+ todo = min3(rx_cnt, ileft, sgileft);
-+ if (todo > 0) {
-+ ileft -= todo;
-+ sgileft -= todo;
-+ }
-+ while (todo > 0) {
-+ writel_relaxed(*src32++, ss->base + SS_RXFIFO);
-+ todo--;
-+ }
-+ if (in_sg != NULL && sgileft == 0 && ileft > 0) {
-+ kunmap(sg_page(in_sg));
-+ in_sg = sg_next(in_sg);
-+ while (in_sg != NULL && in_sg->length == 0)
-+ in_sg = sg_next(in_sg);
-+ if (in_sg != NULL && ileft > 0) {
-+ src_addr = kmap(sg_page(in_sg)) + in_sg->offset;
-+ if (src_addr == NULL) {
-+ dev_err(ss->dev, "ERROR: KMAP for src SG\n");
-+ mutex_unlock(&ss->lock);
-+ return -EINVAL;
-+ }
-+ src32 = src_addr;
-+ sgileft = in_sg->length / 4;
-+ }
-+ }
-+ /* do not test oleft since when oleft == 0 we have finished */
-+ todo = min3(tx_cnt, oleft, sgoleft);
-+ if (todo > 0) {
-+ oleft -= todo;
-+ sgoleft -= todo;
-+ }
-+ while (todo > 0) {
-+ *dst32++ = readl_relaxed(ss->base + SS_TXFIFO);
-+ todo--;
-+ }
-+ if (out_sg != NULL && sgoleft == 0 && oleft >= 0) {
-+ kunmap(sg_page(out_sg));
-+ out_sg = sg_next(out_sg);
-+ while (out_sg != NULL && out_sg->length == 0)
-+ out_sg = sg_next(out_sg);
-+ if (out_sg != NULL && oleft > 0) {
-+ dst_addr = kmap(sg_page(out_sg)) +
-+ out_sg->offset;
-+ if (dst_addr == NULL) {
-+ dev_err(ss->dev, "KMAP error\n");
-+ mutex_unlock(&ss->lock);
-+ return -EINVAL;
-+ }
-+ dst32 = dst_addr;
-+ sgoleft = out_sg->length / 4;
-+ }
-+ }
-+ } while (oleft > 0);
-+
-+ writel(0, ss->base + SS_CTL);
-+ mutex_unlock(&ss->lock);
-+ return 0;
-+}
-+
-+/* Pure CPU way of doing DES/3DES with SS
-+ * Since DES and 3DES SGs could be smaller than 4 bytes, I use sg_copy_to_buffer
-+ * for "linearize" them.
-+ * The problem with that is that I alloc (2 x areq->nbytes) for buf_in/buf_out
-+ * TODO: change this system
-+ * SGsrc -> buf_in -> SS -> buf_out -> SGdst */
-+int sunxi_ss_des_poll(struct ablkcipher_request *areq)
-+{
-+ u32 value, spaces;
-+ size_t nb_in_sg_tx, nb_in_sg_rx;
-+ size_t ir, it;
-+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
-+ struct sunxi_req_ctx *op = crypto_ablkcipher_ctx(tfm);
-+ unsigned int ivsize = crypto_ablkcipher_ivsize(tfm);
-+ u32 tx_cnt = 0;
-+ u32 rx_cnt = 0;
-+ u32 v;
-+ int i;
-+ int no_chunk = 1;
-+
-+ /* if we have only SGs with size multiple of 4,
-+ * we can use the SS AES function */
-+ struct scatterlist *in_sg;
-+ struct scatterlist *out_sg;
-+
-+ in_sg = areq->src;
-+ out_sg = areq->dst;
-+
-+ while (in_sg != NULL && no_chunk == 1) {
-+ if ((in_sg->length % 4) != 0)
-+ no_chunk = 0;
-+ in_sg = sg_next(in_sg);
-+ }
-+ while (out_sg != NULL && no_chunk == 1) {
-+ if ((out_sg->length % 4) != 0)
-+ no_chunk = 0;
-+ out_sg = sg_next(out_sg);
-+ }
-+
-+ if (no_chunk == 1)
-+ return sunxi_ss_aes_poll(areq);
-+ in_sg = areq->src;
-+ out_sg = areq->dst;
-+
-+ nb_in_sg_rx = sg_nents(in_sg);
-+ nb_in_sg_tx = sg_nents(out_sg);
-+
-+ mutex_lock(&ss->bufin_lock);
-+ if (ss->buf_in == NULL) {
-+ ss->buf_in = kmalloc(areq->nbytes, GFP_KERNEL);
-+ ss->buf_in_size = areq->nbytes;
-+ } else {
-+ if (areq->nbytes > ss->buf_in_size) {
-+ kfree(ss->buf_in);
-+ ss->buf_in = kmalloc(areq->nbytes, GFP_KERNEL);
-+ ss->buf_in_size = areq->nbytes;
-+ }
-+ }
-+ if (ss->buf_in == NULL) {
-+ ss->buf_in_size = 0;
-+ mutex_unlock(&ss->bufin_lock);
-+ dev_err(ss->dev, "Unable to allocate pages.\n");
-+ return -ENOMEM;
-+ }
-+ if (ss->buf_out == NULL) {
-+ mutex_lock(&ss->bufout_lock);
-+ ss->buf_out = kmalloc(areq->nbytes, GFP_KERNEL);
-+ if (ss->buf_out == NULL) {
-+ ss->buf_out_size = 0;
-+ mutex_unlock(&ss->bufout_lock);
-+ dev_err(ss->dev, "Unable to allocate pages.\n");
-+ return -ENOMEM;
-+ }
-+ ss->buf_out_size = areq->nbytes;
-+ mutex_unlock(&ss->bufout_lock);
-+ } else {
-+ if (areq->nbytes > ss->buf_out_size) {
-+ mutex_lock(&ss->bufout_lock);
-+ kfree(ss->buf_out);
-+ ss->buf_out = kmalloc(areq->nbytes, GFP_KERNEL);
-+ if (ss->buf_out == NULL) {
-+ ss->buf_out_size = 0;
-+ mutex_unlock(&ss->bufout_lock);
-+ dev_err(ss->dev, "Unable to allocate pages.\n");
-+ return -ENOMEM;
-+ }
-+ ss->buf_out_size = areq->nbytes;
-+ mutex_unlock(&ss->bufout_lock);
-+ }
-+ }
-+
-+ sg_copy_to_buffer(areq->src, nb_in_sg_rx, ss->buf_in, areq->nbytes);
-+
-+ ir = 0;
-+ it = 0;
-+
-+ for (i = 0; i < op->keylen; i += 4)
-+ writel(*(op->key + i/4), ss->base + SS_KEY0 + i);
-+ if (areq->info != NULL) {
-+ for (i = 0; i < 4 && i < ivsize / 4; i++) {
-+ v = *(u32 *)(areq->info + i * 4);
-+ writel(v, ss->base + SS_IV0 + i * 4);
-+ }
-+ }
-+ writel(op->mode, ss->base + SS_CTL);
-+
-+ do {
-+ if (rx_cnt == 0 || tx_cnt == 0) {
-+ spaces = readl(ss->base + SS_FCSR);
-+ rx_cnt = SS_RXFIFO_SPACES(spaces);
-+ tx_cnt = SS_TXFIFO_SPACES(spaces);
-+ }
-+ if (rx_cnt > 0 && ir < areq->nbytes) {
-+ do {
-+ value = *(u32 *)(ss->buf_in + ir);
-+ writel(value, ss->base + SS_RXFIFO);
-+ ir += 4;
-+ rx_cnt--;
-+ } while (rx_cnt > 0 && ir < areq->nbytes);
-+ }
-+ if (tx_cnt > 0 && it < areq->nbytes) {
-+ do {
-+ value = readl(ss->base + SS_TXFIFO);
-+ *(u32 *)(ss->buf_out + it) = value;
-+ it += 4;
-+ tx_cnt--;
-+ } while (tx_cnt > 0 && it < areq->nbytes);
-+ }
-+ if (ir == areq->nbytes) {
-+ mutex_unlock(&ss->bufin_lock);
-+ ir++;
-+ }
-+ } while (it < areq->nbytes);
-+
-+ writel(0, ss->base + SS_CTL);
-+ mutex_unlock(&ss->lock);
-+
-+ /* a simple optimization, since we dont need the hardware for this copy
-+ * we release the lock and do the copy. With that we gain 5/10% perf */
-+ mutex_lock(&ss->bufout_lock);
-+ sg_copy_from_buffer(areq->dst, nb_in_sg_tx, ss->buf_out, areq->nbytes);
-+
-+ mutex_unlock(&ss->bufout_lock);
-+ return 0;
-+}
-+
-+/* check and set the AES key, prepare the mode to be used */
-+int sunxi_ss_aes_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
-+ unsigned int keylen)
-+{
-+ struct sunxi_req_ctx *op = crypto_ablkcipher_ctx(tfm);
-+
-+ switch (keylen) {
-+ case 128 / 8:
-+ op->mode = SS_AES_128BITS;
-+ break;
-+ case 192 / 8:
-+ op->mode = SS_AES_192BITS;
-+ break;
-+ case 256 / 8:
-+ op->mode = SS_AES_256BITS;
-+ break;
-+ default:
-+ dev_err(ss->dev, "ERROR: Invalid keylen %u\n", keylen);
-+ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
-+ mutex_unlock(&ss->lock);
-+ return -EINVAL;
-+ }
-+ op->keylen = keylen;
-+ memcpy(op->key, key, keylen);
-+ return 0;
-+}
-+
-+/* check and set the DES key, prepare the mode to be used */
-+int sunxi_ss_des_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
-+ unsigned int keylen)
-+{
-+ struct sunxi_req_ctx *op = crypto_ablkcipher_ctx(tfm);
-+
-+ if (keylen != DES_KEY_SIZE) {
-+ dev_err(ss->dev, "Invalid keylen %u\n", keylen);
-+ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
-+ mutex_unlock(&ss->lock);
-+ return -EINVAL;
-+ }
-+ op->keylen = keylen;
-+ memcpy(op->key, key, keylen);
-+ return 0;
-+}
-+
-+/* check and set the 3DES key, prepare the mode to be used */
-+int sunxi_ss_des3_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
-+ unsigned int keylen)
-+{
-+ struct sunxi_req_ctx *op = crypto_ablkcipher_ctx(tfm);
-+
-+ if (keylen != 3 * DES_KEY_SIZE) {
-+ dev_err(ss->dev, "Invalid keylen %u\n", keylen);
-+ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
-+ mutex_unlock(&ss->lock);
-+ return -EINVAL;
-+ }
-+ op->keylen = keylen;
-+ memcpy(op->key, key, keylen);
-+ return 0;
-+}
---- /dev/null
-+++ b/drivers/crypto/sunxi-ss/sunxi-ss-core.c
-@@ -0,0 +1,308 @@
-+/*
-+ * sunxi-ss.c - hardware cryptographic accelerator for Allwinner A20 SoC
-+ *
-+ * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@gmail.com>
-+ *
-+ * Core file which registers crypto algorithms supported by the SS.
-+ *
-+ * You could find the datasheet at
-+ * http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
-+ *
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+#include <linux/clk.h>
-+#include <linux/crypto.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <crypto/scatterwalk.h>
-+#include <linux/scatterlist.h>
-+#include <linux/interrupt.h>
-+#include <linux/delay.h>
-+
-+#include "sunxi-ss.h"
-+
-+struct sunxi_ss_ctx *ss;
-+
-+/* General notes:
-+ * I cannot use a key/IV cache because each time one of these change ALL stuff
-+ * need to be re-writed (rewrite SS_KEYX ans SS_IVX).
-+ * And for example, with dm-crypt IV changes on each request.
-+ *
-+ * After each request the device must be disabled with a write of 0 in SS_CTL
-+ *
-+ * For performance reason, we use writel_relaxed/read_relaxed for all
-+ * operations on RX and TX FIFO and also SS_FCSR.
-+ * For all other registers, we use writel/readl.
-+ * See http://permalink.gmane.org/gmane.linux.ports.arm.kernel/117644
-+ * and http://permalink.gmane.org/gmane.linux.ports.arm.kernel/117640
-+ * */
-+
-+static struct ahash_alg sunxi_md5_alg = {
-+ .init = sunxi_hash_init,
-+ .update = sunxi_hash_update,
-+ .final = sunxi_hash_final,
-+ .finup = sunxi_hash_finup,
-+ .digest = sunxi_hash_digest,
-+ .halg = {
-+ .digestsize = MD5_DIGEST_SIZE,
-+ .base = {
-+ .cra_name = "md5",
-+ .cra_driver_name = "md5-sunxi-ss",
-+ .cra_priority = 300,
-+ .cra_alignmask = 3,
-+ .cra_flags = CRYPTO_ALG_TYPE_AHASH | CRYPTO_ALG_ASYNC,
-+ .cra_blocksize = MD5_HMAC_BLOCK_SIZE,
-+ .cra_ctxsize = sizeof(struct sunxi_req_ctx),
-+ .cra_module = THIS_MODULE,
-+ .cra_type = &crypto_ahash_type
-+ }
-+ }
-+};
-+static struct ahash_alg sunxi_sha1_alg = {
-+ .init = sunxi_hash_init,
-+ .update = sunxi_hash_update,
-+ .final = sunxi_hash_final,
-+ .finup = sunxi_hash_finup,
-+ .digest = sunxi_hash_digest,
-+ .halg = {
-+ .digestsize = SHA1_DIGEST_SIZE,
-+ .base = {
-+ .cra_name = "sha1",
-+ .cra_driver_name = "sha1-sunxi-ss",
-+ .cra_priority = 300,
-+ .cra_alignmask = 3,
-+ .cra_flags = CRYPTO_ALG_TYPE_AHASH | CRYPTO_ALG_ASYNC,
-+ .cra_blocksize = SHA1_BLOCK_SIZE,
-+ .cra_ctxsize = sizeof(struct sunxi_req_ctx),
-+ .cra_module = THIS_MODULE,
-+ .cra_type = &crypto_ahash_type
-+ }
-+ }
-+};
-+
-+static struct crypto_alg sunxi_cipher_algs[] = {
-+{
-+ .cra_name = "cbc(aes)",
-+ .cra_driver_name = "cbc-aes-sunxi-ss",
-+ .cra_priority = 300,
-+ .cra_blocksize = AES_BLOCK_SIZE,
-+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER,
-+ .cra_ctxsize = sizeof(struct sunxi_req_ctx),
-+ .cra_module = THIS_MODULE,
-+ .cra_alignmask = 3,
-+ .cra_type = &crypto_ablkcipher_type,
-+ .cra_init = sunxi_ss_cipher_init,
-+ .cra_u = {
-+ .ablkcipher = {
-+ .min_keysize = AES_MIN_KEY_SIZE,
-+ .max_keysize = AES_MAX_KEY_SIZE,
-+ .ivsize = AES_BLOCK_SIZE,
-+ .setkey = sunxi_ss_aes_setkey,
-+ .encrypt = sunxi_ss_cipher_encrypt,
-+ .decrypt = sunxi_ss_cipher_decrypt,
-+ }
-+ }
-+}, {
-+ .cra_name = "cbc(des)",
-+ .cra_driver_name = "cbc-des-sunxi-ss",
-+ .cra_priority = 300,
-+ .cra_blocksize = DES_BLOCK_SIZE,
-+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER,
-+ .cra_ctxsize = sizeof(struct sunxi_req_ctx),
-+ .cra_module = THIS_MODULE,
-+ .cra_alignmask = 3,
-+ .cra_type = &crypto_ablkcipher_type,
-+ .cra_init = sunxi_ss_cipher_init,
-+ .cra_u.ablkcipher = {
-+ .min_keysize = DES_KEY_SIZE,
-+ .max_keysize = DES_KEY_SIZE,
-+ .ivsize = DES_BLOCK_SIZE,
-+ .setkey = sunxi_ss_des_setkey,
-+ .encrypt = sunxi_ss_cipher_encrypt,
-+ .decrypt = sunxi_ss_cipher_decrypt,
-+ }
-+}, {
-+ .cra_name = "cbc(des3_ede)",
-+ .cra_driver_name = "cbc-des3-sunxi-ss",
-+ .cra_priority = 300,
-+ .cra_blocksize = DES3_EDE_BLOCK_SIZE,
-+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER,
-+ .cra_ctxsize = sizeof(struct sunxi_req_ctx),
-+ .cra_module = THIS_MODULE,
-+ .cra_alignmask = 3,
-+ .cra_type = &crypto_ablkcipher_type,
-+ .cra_init = sunxi_ss_cipher_init,
-+ .cra_u.ablkcipher = {
-+ .min_keysize = DES3_EDE_KEY_SIZE,
-+ .max_keysize = DES3_EDE_KEY_SIZE,
-+ .ivsize = DES3_EDE_BLOCK_SIZE,
-+ .setkey = sunxi_ss_des3_setkey,
-+ .encrypt = sunxi_ss_cipher_encrypt,
-+ .decrypt = sunxi_ss_cipher_decrypt,
-+ }
-+}
-+};
-+
-+static int sunxi_ss_probe(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+ u32 v;
-+ int err;
-+ unsigned long cr;
-+ const unsigned long cr_ahb = 24 * 1000 * 1000;
-+ const unsigned long cr_mod = 150 * 1000 * 1000;
-+
-+ if (!pdev->dev.of_node)
-+ return -ENODEV;
-+
-+ ss = devm_kzalloc(&pdev->dev, sizeof(*ss), GFP_KERNEL);
-+ if (ss == NULL)
-+ return -ENOMEM;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ ss->base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(ss->base)) {
-+ dev_err(&pdev->dev, "Cannot request MMIO\n");
-+ return PTR_ERR(ss->base);
-+ }
-+
-+ ss->ssclk = devm_clk_get(&pdev->dev, "mod");
-+ if (IS_ERR(ss->ssclk)) {
-+ err = PTR_ERR(ss->ssclk);
-+ dev_err(&pdev->dev, "Cannot get SS clock err=%d\n", err);
-+ return err;
-+ }
-+ dev_dbg(&pdev->dev, "clock ss acquired\n");
-+
-+ ss->busclk = devm_clk_get(&pdev->dev, "ahb");
-+ if (IS_ERR(ss->busclk)) {
-+ err = PTR_ERR(ss->busclk);
-+ dev_err(&pdev->dev, "Cannot get AHB SS clock err=%d\n", err);
-+ return err;
-+ }
-+ dev_dbg(&pdev->dev, "clock ahb_ss acquired\n");
-+
-+ /* Enable the clocks */
-+ err = clk_prepare_enable(ss->busclk);
-+ if (err != 0) {
-+ dev_err(&pdev->dev, "Cannot prepare_enable busclk\n");
-+ return err;
-+ }
-+ err = clk_prepare_enable(ss->ssclk);
-+ if (err != 0) {
-+ dev_err(&pdev->dev, "Cannot prepare_enable ssclk\n");
-+ clk_disable_unprepare(ss->busclk);
-+ return err;
-+ }
-+
-+ /* Check that clock have the correct rates gived in the datasheet */
-+ /* Try to set the clock to the maximum allowed */
-+ err = clk_set_rate(ss->ssclk, cr_mod);
-+ if (err != 0) {
-+ dev_err(&pdev->dev, "Cannot set clock rate to ssclk\n");
-+ clk_disable_unprepare(ss->ssclk);
-+ clk_disable_unprepare(ss->busclk);
-+ return err;
-+ }
-+ cr = clk_get_rate(ss->busclk);
-+ if (cr >= cr_ahb)
-+ dev_dbg(&pdev->dev, "Clock bus %lu (%lu MHz) (must be >= %lu)\n",
-+ cr, cr / 1000000, cr_ahb);
-+ else
-+ dev_warn(&pdev->dev, "Clock bus %lu (%lu MHz) (must be >= %lu)\n",
-+ cr, cr / 1000000, cr_ahb);
-+ cr = clk_get_rate(ss->ssclk);
-+ if (cr == cr_mod)
-+ dev_dbg(&pdev->dev, "Clock ss %lu (%lu MHz) (must be <= %lu)\n",
-+ cr, cr / 1000000, cr_mod);
-+ else {
-+ dev_warn(&pdev->dev, "Clock ss is at %lu (%lu MHz) (must be <= %lu)\n",
-+ cr, cr / 1000000, cr_mod);
-+ }
-+
-+ /* TODO Does this information could be usefull ? */
-+ writel(SS_ENABLED, ss->base + SS_CTL);
-+ v = readl(ss->base + SS_CTL);
-+ v >>= 16;
-+ v &= 0x07;
-+ dev_info(&pdev->dev, "Die ID %d\n", v);
-+ writel(0, ss->base + SS_CTL);
-+
-+ ss->dev = &pdev->dev;
-+
-+ mutex_init(&ss->lock);
-+ mutex_init(&ss->bufin_lock);
-+ mutex_init(&ss->bufout_lock);
-+
-+ err = crypto_register_ahash(&sunxi_md5_alg);
-+ if (err)
-+ goto error_md5;
-+ err = crypto_register_ahash(&sunxi_sha1_alg);
-+ if (err)
-+ goto error_sha1;
-+ err = crypto_register_algs(sunxi_cipher_algs,
-+ ARRAY_SIZE(sunxi_cipher_algs));
-+ if (err)
-+ goto error_ciphers;
-+
-+ return 0;
-+error_ciphers:
-+ crypto_unregister_ahash(&sunxi_sha1_alg);
-+error_sha1:
-+ crypto_unregister_ahash(&sunxi_md5_alg);
-+error_md5:
-+ clk_disable_unprepare(ss->ssclk);
-+ clk_disable_unprepare(ss->busclk);
-+ return err;
-+}
-+
-+static int __exit sunxi_ss_remove(struct platform_device *pdev)
-+{
-+ if (!pdev->dev.of_node)
-+ return 0;
-+
-+ crypto_unregister_ahash(&sunxi_md5_alg);
-+ crypto_unregister_ahash(&sunxi_sha1_alg);
-+ crypto_unregister_algs(sunxi_cipher_algs,
-+ ARRAY_SIZE(sunxi_cipher_algs));
-+
-+ if (ss->buf_in != NULL)
-+ kfree(ss->buf_in);
-+ if (ss->buf_out != NULL)
-+ kfree(ss->buf_out);
-+
-+ writel(0, ss->base + SS_CTL);
-+ clk_disable_unprepare(ss->busclk);
-+ clk_disable_unprepare(ss->ssclk);
-+ return 0;
-+}
-+
-+/*============================================================================*/
-+/*============================================================================*/
-+static const struct of_device_id a20ss_crypto_of_match_table[] = {
-+ { .compatible = "allwinner,sun7i-a20-crypto" },
-+ {}
-+};
-+MODULE_DEVICE_TABLE(of, a20ss_crypto_of_match_table);
-+
-+static struct platform_driver sunxi_ss_driver = {
-+ .probe = sunxi_ss_probe,
-+ .remove = __exit_p(sunxi_ss_remove),
-+ .driver = {
-+ .owner = THIS_MODULE,
-+ .name = "sunxi-ss",
-+ .of_match_table = a20ss_crypto_of_match_table,
-+ },
-+};
-+
-+module_platform_driver(sunxi_ss_driver);
-+
-+MODULE_DESCRIPTION("Allwinner Security System cryptographic accelerator");
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Corentin LABBE <clabbe.montjoie@gmail.com>");
---- /dev/null
-+++ b/drivers/crypto/sunxi-ss/sunxi-ss-hash.c
-@@ -0,0 +1,241 @@
-+/*
-+ * sunxi-ss-hash.c - hardware cryptographic accelerator for Allwinner A20 SoC
-+ *
-+ * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@gmail.com>
-+ *
-+ * This file add support for MD5 and SHA1.
-+ *
-+ * You could find the datasheet at
-+ * http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+#include "sunxi-ss.h"
-+
-+extern struct sunxi_ss_ctx *ss;
-+
-+/* sunxi_hash_init: initialize request context
-+ * Activate the SS, and configure it for MD5 or SHA1
-+ */
-+int sunxi_hash_init(struct ahash_request *areq)
-+{
-+ const char *hash_type;
-+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq);
-+ struct sunxi_req_ctx *op = crypto_ahash_ctx(tfm);
-+
-+ mutex_lock(&ss->lock);
-+
-+ hash_type = crypto_tfm_alg_name(areq->base.tfm);
-+
-+ op->byte_count = 0;
-+ op->nbwait = 0;
-+ op->waitbuf = 0;
-+
-+ /* Enable and configure SS for MD5 or SHA1 */
-+ if (strcmp(hash_type, "sha1") == 0)
-+ op->mode = SS_OP_SHA1;
-+ else
-+ op->mode = SS_OP_MD5;
-+
-+ writel(op->mode | SS_ENABLED, ss->base + SS_CTL);
-+ return 0;
-+}
-+
-+/*
-+ * sunxi_hash_update: update hash engine
-+ *
-+ * Could be used for both SHA1 and MD5
-+ * Write data by step of 32bits and put then in the SS.
-+ * The remaining data is stored (nbwait bytes) in op->waitbuf
-+ * As an optimisation, we do not check RXFIFO_SPACES, since SS handle
-+ * the FIFO faster than our writes
-+ */
-+int sunxi_hash_update(struct ahash_request *areq)
-+{
-+ u32 v;
-+ unsigned int i = 0;/* bytes read, to be compared to areq->nbytes */
-+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq);
-+ struct sunxi_req_ctx *op = crypto_ahash_ctx(tfm);
-+ struct scatterlist *in_sg;
-+ unsigned int in_i = 0;/* advancement in the current SG */
-+ void *src_addr;
-+
-+ u8 *waitbuf = (u8 *)(&op->waitbuf);
-+
-+ if (areq->nbytes == 0)
-+ return 0;
-+
-+ in_sg = areq->src;
-+ do {
-+ src_addr = kmap(sg_page(in_sg)) + in_sg->offset;
-+ /* step 1, if some bytes remains from last SG,
-+ * try to complete them to 4 and sent its */
-+ if (op->nbwait > 0) {
-+ while (op->nbwait < 4 && i < areq->nbytes &&
-+ in_i < in_sg->length) {
-+ waitbuf[op->nbwait] = *(u8 *)(src_addr + in_i);
-+ i++;
-+ in_i++;
-+ op->nbwait++;
-+ }
-+ if (op->nbwait == 4) {
-+ writel(op->waitbuf, ss->base + SS_RXFIFO);
-+ op->byte_count += 4;
-+ op->nbwait = 0;
-+ op->waitbuf = 0;
-+ }
-+ }
-+ /* step 2, main loop, read data 4bytes at a time */
-+ while (i < areq->nbytes && areq->nbytes - i >= 4 &&
-+ in_i < in_sg->length &&
-+ in_sg->length - in_i >= 4) {
-+ v = *(u32 *)(src_addr + in_i);
-+ writel_relaxed(v, ss->base + SS_RXFIFO);
-+ i += 4;
-+ op->byte_count += 4;
-+ in_i += 4;
-+ }
-+ /* step 3, if we have less than 4 bytes, copy them in waitbuf
-+ * no need to check for op->nbwait < 4 since we cannot have
-+ * more than 4 bytes remaining */
-+ if (in_i < in_sg->length && in_sg->length - in_i < 4 &&
-+ i < areq->nbytes) {
-+ do {
-+ waitbuf[op->nbwait] = *(u8 *)(src_addr + in_i);
-+ op->nbwait++;
-+ in_i++;
-+ i++;
-+ } while (in_i < in_sg->length && i < areq->nbytes);
-+ }
-+ /* we have finished the current SG, try next one */
-+ kunmap(sg_page(in_sg));
-+ in_sg = sg_next(in_sg);
-+ in_i = 0;
-+ } while (in_sg != NULL && i < areq->nbytes);
-+ return 0;
-+}
-+
-+/*
-+ * sunxi_hash_final: finalize hashing operation
-+ *
-+ * If we have some remaining bytes, send it.
-+ * Then ask the SS for finalizing the hash
-+ */
-+int sunxi_hash_final(struct ahash_request *areq)
-+{
-+ u32 v;
-+ unsigned int i;
-+ int zeros;
-+ unsigned int index, padlen;
-+ __be64 bits;
-+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq);
-+ struct sunxi_req_ctx *op = crypto_ahash_ctx(tfm);
-+
-+ if (op->nbwait > 0) {
-+ op->waitbuf |= ((1 << 7) << (op->nbwait * 8));
-+ writel(op->waitbuf, ss->base + SS_RXFIFO);
-+ } else {
-+ writel((1 << 7), ss->base + SS_RXFIFO);
-+ }
-+
-+ /* number of space to pad to obtain 64o minus 8(size) minus 4 (final 1)
-+ * example len=0
-+ * example len=56
-+ * */
-+
-+ /* we have already send 4 more byte of which nbwait data */
-+ if (op->mode == SS_OP_MD5) {
-+ index = (op->byte_count + 4) & 0x3f;
-+ op->byte_count += op->nbwait;
-+ if (index > 56)
-+ zeros = (120 - index) / 4;
-+ else
-+ zeros = (56 - index) / 4;
-+ } else {
-+ op->byte_count += op->nbwait;
-+ index = op->byte_count & 0x3f;
-+ padlen = (index < 56) ? (56 - index) : ((64+56) - index);
-+ zeros = (padlen - 1) / 4;
-+ }
-+ for (i = 0; i < zeros; i++)
-+ writel(0, ss->base + SS_RXFIFO);
-+
-+ /* write the lenght */
-+ if (op->mode == SS_OP_SHA1) {
-+ bits = cpu_to_be64(op->byte_count << 3);
-+ writel(bits & 0xffffffff, ss->base + SS_RXFIFO);
-+ writel((bits >> 32) & 0xffffffff, ss->base + SS_RXFIFO);
-+ } else {
-+ writel((op->byte_count << 3) & 0xffffffff,
-+ ss->base + SS_RXFIFO);
-+ writel((op->byte_count >> 29) & 0xffffffff,
-+ ss->base + SS_RXFIFO);
-+ }
-+
-+ /* stop the hashing */
-+ v = readl(ss->base + SS_CTL);
-+ v |= SS_DATA_END;
-+ writel(v, ss->base + SS_CTL);
-+
-+ /* check the end */
-+ /* The timeout could happend only in case of bad overcloking */
-+#define SS_TIMEOUT 100
-+ i = 0;
-+ do {
-+ v = readl(ss->base + SS_CTL);
-+ i++;
-+ } while (i < SS_TIMEOUT && (v & SS_DATA_END) > 0);
-+ if (i >= SS_TIMEOUT) {
-+ dev_err(ss->dev, "ERROR: hash end timeout %d>%d\n",
-+ i, SS_TIMEOUT);
-+ writel(0, ss->base + SS_CTL);
-+ mutex_unlock(&ss->lock);
-+ return -1;
-+ }
-+
-+ if (op->mode == SS_OP_SHA1) {
-+ for (i = 0; i < 5; i++) {
-+ v = cpu_to_be32(readl(ss->base + SS_MD0 + i * 4));
-+ memcpy(areq->result + i * 4, &v, 4);
-+ }
-+ } else {
-+ for (i = 0; i < 4; i++) {
-+ v = readl(ss->base + SS_MD0 + i * 4);
-+ memcpy(areq->result + i * 4, &v, 4);
-+ }
-+ }
-+ writel(0, ss->base + SS_CTL);
-+ mutex_unlock(&ss->lock);
-+ return 0;
-+}
-+
-+/* sunxi_hash_finup: finalize hashing operation after an update */
-+int sunxi_hash_finup(struct ahash_request *areq)
-+{
-+ int err;
-+
-+ err = sunxi_hash_update(areq);
-+ if (err != 0)
-+ return err;
-+
-+ return sunxi_hash_final(areq);
-+}
-+
-+/* combo of init/update/final functions */
-+int sunxi_hash_digest(struct ahash_request *areq)
-+{
-+ int err;
-+
-+ err = sunxi_hash_init(areq);
-+ if (err != 0)
-+ return err;
-+
-+ err = sunxi_hash_update(areq);
-+ if (err != 0)
-+ return err;
-+
-+ return sunxi_hash_final(areq);
-+}
---- /dev/null
-+++ b/drivers/crypto/sunxi-ss/sunxi-ss.h
-@@ -0,0 +1,183 @@
-+/*
-+ * sunxi-ss.c - hardware cryptographic accelerator for Allwinner A20 SoC
-+ *
-+ * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@gmail.com>
-+ *
-+ * Support AES cipher with 128,192,256 bits keysize.
-+ * Support MD5 and SHA1 hash algorithms.
-+ * Support DES and 3DES
-+ * Support PRNG
-+ *
-+ * You could find the datasheet at
-+ * http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
-+ *
-+ *
-+ * Licensed under the GPL-2.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/crypto.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <crypto/scatterwalk.h>
-+#include <linux/scatterlist.h>
-+#include <linux/interrupt.h>
-+#include <linux/delay.h>
-+#include <crypto/md5.h>
-+#include <crypto/sha.h>
-+#include <crypto/hash.h>
-+#include <crypto/internal/hash.h>
-+#include <crypto/aes.h>
-+#include <crypto/des.h>
-+#include <crypto/internal/rng.h>
-+
-+#define SS_CTL 0x00
-+#define SS_KEY0 0x04
-+#define SS_KEY1 0x08
-+#define SS_KEY2 0x0C
-+#define SS_KEY3 0x10
-+#define SS_KEY4 0x14
-+#define SS_KEY5 0x18
-+#define SS_KEY6 0x1C
-+#define SS_KEY7 0x20
-+
-+#define SS_IV0 0x24
-+#define SS_IV1 0x28
-+#define SS_IV2 0x2C
-+#define SS_IV3 0x30
-+
-+#define SS_CNT0 0x34
-+#define SS_CNT1 0x38
-+#define SS_CNT2 0x3C
-+#define SS_CNT3 0x40
-+
-+#define SS_FCSR 0x44
-+#define SS_ICSR 0x48
-+
-+#define SS_MD0 0x4C
-+#define SS_MD1 0x50
-+#define SS_MD2 0x54
-+#define SS_MD3 0x58
-+#define SS_MD4 0x5C
-+
-+#define SS_RXFIFO 0x200
-+#define SS_TXFIFO 0x204
-+
-+/* SS_CTL configuration values */
-+
-+/* PRNG generator mode - bit 15 */
-+#define SS_PRNG_ONESHOT (0 << 15)
-+#define SS_PRNG_CONTINUE (1 << 15)
-+
-+/* SS operation mode - bits 12-13 */
-+#define SS_ECB (0 << 12)
-+#define SS_CBC (1 << 12)
-+#define SS_CNT (2 << 12)
-+
-+/* Counter width for CNT mode - bits 10-11 */
-+#define SS_CNT_16BITS (0 << 10)
-+#define SS_CNT_32BITS (1 << 10)
-+#define SS_CNT_64BITS (2 << 10)
-+
-+/* Key size for AES - bits 8-9 */
-+#define SS_AES_128BITS (0 << 8)
-+#define SS_AES_192BITS (1 << 8)
-+#define SS_AES_256BITS (2 << 8)
-+
-+/* Operation direction - bit 7 */
-+#define SS_ENCRYPTION (0 << 7)
-+#define SS_DECRYPTION (1 << 7)
-+
-+/* SS Method - bits 4-6 */
-+#define SS_OP_AES (0 << 4)
-+#define SS_OP_DES (1 << 4)
-+#define SS_OP_3DES (2 << 4)
-+#define SS_OP_SHA1 (3 << 4)
-+#define SS_OP_MD5 (4 << 4)
-+#define SS_OP_PRNG (5 << 4)
-+
-+/* Data end bit - bit 2 */
-+#define SS_DATA_END (1 << 2)
-+
-+/* PRNG start bit - bit 1 */
-+#define SS_PRNG_START (1 << 1)
-+
-+/* SS Enable bit - bit 0 */
-+#define SS_DISABLED (0 << 0)
-+#define SS_ENABLED (1 << 0)
-+
-+/* SS_FCSR configuration values */
-+/* RX FIFO status - bit 30 */
-+#define SS_RXFIFO_FREE (1 << 30)
-+
-+/* RX FIFO empty spaces - bits 24-29 */
-+#define SS_RXFIFO_SPACES(val) (((val) >> 24) & 0x3f)
-+
-+/* TX FIFO status - bit 22 */
-+#define SS_TXFIFO_AVAILABLE (1 << 22)
-+
-+/* TX FIFO available spaces - bits 16-21 */
-+#define SS_TXFIFO_SPACES(val) (((val) >> 16) & 0x3f)
-+
-+#define SS_RXFIFO_EMP_INT_PENDING (1 << 10)
-+#define SS_TXFIFO_AVA_INT_PENDING (1 << 8)
-+#define SS_RXFIFO_EMP_INT_ENABLE (1 << 2)
-+#define SS_TXFIFO_AVA_INT_ENABLE (1 << 0)
-+
-+/* SS_ICSR configuration values */
-+#define SS_ICS_DRQ_ENABLE (1 << 4)
-+
-+struct sunxi_ss_ctx {
-+ void __iomem *base;
-+ int irq;
-+ struct clk *busclk;
-+ struct clk *ssclk;
-+ struct device *dev;
-+ struct resource *res;
-+ void *buf_in; /* pointer to data to be uploaded to the device */
-+ size_t buf_in_size; /* size of buf_in */
-+ void *buf_out;
-+ size_t buf_out_size;
-+ struct mutex lock; /* control the use of the device */
-+ struct mutex bufout_lock; /* control the use of buf_out*/
-+ struct mutex bufin_lock; /* control the sue of buf_in*/
-+};
-+
-+struct sunxi_req_ctx {
-+ u32 key[AES_MAX_KEY_SIZE / 4];/* divided by sizeof(u32) */
-+ u32 keylen;
-+ u32 mode;
-+ u64 byte_count; /* number of bytes "uploaded" to the device */
-+ u32 waitbuf; /* a partial word waiting to be completed and
-+ uploaded to the device */
-+ /* number of bytes to be uploaded in the waitbuf word */
-+ unsigned int nbwait;
-+};
-+
-+#define SS_SEED_LEN (192/8)
-+#define SS_DATA_LEN (160/8)
-+
-+struct prng_context {
-+ u32 seed[SS_SEED_LEN/4];
-+ unsigned int slen;
-+};
-+
-+int sunxi_hash_init(struct ahash_request *areq);
-+int sunxi_hash_update(struct ahash_request *areq);
-+int sunxi_hash_final(struct ahash_request *areq);
-+int sunxi_hash_finup(struct ahash_request *areq);
-+int sunxi_hash_digest(struct ahash_request *areq);
-+
-+int sunxi_ss_aes_poll(struct ablkcipher_request *areq);
-+int sunxi_ss_des_poll(struct ablkcipher_request *areq);
-+int sunxi_ss_cipher_init(struct crypto_tfm *tfm);
-+int sunxi_ss_cipher_encrypt(struct ablkcipher_request *areq);
-+int sunxi_ss_cipher_decrypt(struct ablkcipher_request *areq);
-+int sunxi_ss_aes_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
-+ unsigned int keylen);
-+int sunxi_ss_des_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
-+ unsigned int keylen);
-+int sunxi_ss_des3_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
-+ unsigned int keylen);
diff --git a/target/linux/sunxi/patches-3.14/275-clk-sunxi-late-clock-fixes.patch b/target/linux/sunxi/patches-3.14/275-clk-sunxi-late-clock-fixes.patch
deleted file mode 100644
index 5b0ca8d398..0000000000
--- a/target/linux/sunxi/patches-3.14/275-clk-sunxi-late-clock-fixes.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/drivers/clk/sunxi/clk-sunxi.c
-+++ b/drivers/clk/sunxi/clk-sunxi.c
-@@ -299,7 +299,7 @@ static void sun4i_get_apb1_factors(u32 *
- if (parent_rate < *freq)
- *freq = parent_rate;
-
-- parent_rate = (parent_rate + (*freq - 1)) / *freq;
-+ parent_rate = DIV_ROUND_UP(parent_rate, *freq);
-
- /* Invalid rate! */
- if (parent_rate > 32)
-@@ -344,7 +344,7 @@ static void sun4i_get_mod0_factors(u32 *
- if (*freq > parent_rate)
- *freq = parent_rate;
-
-- div = parent_rate / *freq;
-+ div = DIV_ROUND_UP(parent_rate, *freq);
-
- if (div < 16)
- calcp = 0;
-@@ -385,7 +385,7 @@ static void sun7i_a20_get_out_factors(u3
- if (*freq > parent_rate)
- *freq = parent_rate;
-
-- div = parent_rate / *freq;
-+ div = DIV_ROUND_UP(parent_rate, *freq);
-
- if (div < 32)
- calcp = 0;
diff --git a/target/linux/sunxi/patches-3.14/280-ir-add-driver.patch b/target/linux/sunxi/patches-3.14/280-ir-add-driver.patch
deleted file mode 100644
index fe7bb535cf..0000000000
--- a/target/linux/sunxi/patches-3.14/280-ir-add-driver.patch
+++ /dev/null
@@ -1,363 +0,0 @@
-From 601b6a88cd14e655ccd246fe122cbf496a891cbb Mon Sep 17 00:00:00 2001
-From: Alexander Bersenev <bay@hackerdom.ru>
-Date: Mon, 9 Jun 2014 00:08:10 +0600
-Subject: [PATCH] rc: add sunxi-ir driver
-
-This patch adds driver for sunxi IR controller.
-It is based on Alexsey Shestacov's work based on the original driver
-supplied by Allwinner.
-
-Signed-off-by: Alexander Bersenev <bay@hackerdom.ru>
-Signed-off-by: Alexsey Shestacov <wingrime@linux-sunxi.org>
----
- drivers/media/rc/Kconfig | 10 ++
- drivers/media/rc/Makefile | 1 +
- drivers/media/rc/sunxi-cir.c | 318 +++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 329 insertions(+)
- create mode 100644 drivers/media/rc/sunxi-cir.c
-
---- a/drivers/media/rc/Kconfig
-+++ b/drivers/media/rc/Kconfig
-@@ -332,4 +332,14 @@ config RC_ST
-
- If you're not sure, select N here.
-
-+config IR_SUNXI
-+ tristate "SUNXI IR remote control"
-+ depends on RC_CORE
-+ depends on ARCH_SUNXI
-+ ---help---
-+ Say Y if you want to use sunXi internal IR Controller
-+
-+ To compile this driver as a module, choose M here: the module will
-+ be called sunxi-ir.
-+
- endif #RC_DEVICES
---- a/drivers/media/rc/Makefile
-+++ b/drivers/media/rc/Makefile
-@@ -31,3 +31,4 @@ obj-$(CONFIG_IR_GPIO_CIR) += gpio-ir-rec
- obj-$(CONFIG_IR_IGUANA) += iguanair.o
- obj-$(CONFIG_IR_TTUSBIR) += ttusbir.o
- obj-$(CONFIG_RC_ST) += st_rc.o
-+obj-$(CONFIG_IR_SUNXI) += sunxi-cir.o
---- /dev/null
-+++ b/drivers/media/rc/sunxi-cir.c
-@@ -0,0 +1,318 @@
-+/*
-+ * Driver for Allwinner sunXi IR controller
-+ *
-+ * Copyright (C) 2014 Alexsey Shestacov <wingrime@linux-sunxi.org>
-+ * Copyright (C) 2014 Alexander Bersenev <bay@hackerdom.ru>
-+ *
-+ * Based on sun5i-ir.c:
-+ * Copyright (C) 2007-2012 Daniel Wang
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/of_platform.h>
-+#include <media/rc-core.h>
-+
-+#define SUNXI_IR_DEV "sunxi-ir"
-+
-+/* Registers */
-+/* IR Control */
-+#define SUNXI_IR_CTL_REG 0x00
-+/* Global Enable */
-+#define REG_CTL_GEN BIT(0)
-+/* RX block enable */
-+#define REG_CTL_RXEN BIT(1)
-+/* CIR mode */
-+#define REG_CTL_MD (BIT(4) | BIT(5))
-+
-+/* Rx Config */
-+#define SUNXI_IR_RXCTL_REG 0x10
-+/* Pulse Polarity Invert flag */
-+#define REG_RXCTL_RPPI BIT(2)
-+
-+/* Rx Data */
-+#define SUNXI_IR_RXFIFO_REG 0x20
-+
-+/* Rx Interrupt Enable */
-+#define SUNXI_IR_RXINT_REG 0x2C
-+/* Rx FIFO Overflow */
-+#define REG_RXINT_ROI_EN BIT(0)
-+/* Rx Packet End */
-+#define REG_RXINT_RPEI_EN BIT(1)
-+/* Rx FIFO Data Available */
-+#define REG_RXINT_RAI_EN BIT(4)
-+
-+/* Rx FIFO available byte level */
-+#define REG_RXINT_RAL(val) (((val) << 8) & (GENMASK(11, 8)))
-+
-+/* Rx Interrupt Status */
-+#define SUNXI_IR_RXSTA_REG 0x30
-+/* RX FIFO Get Available Counter */
-+#define REG_RXSTA_GET_AC(val) (((val) >> 8) & (GENMASK(5, 0)))
-+/* Clear all interrupt status value */
-+#define REG_RXSTA_CLEARALL 0xff
-+
-+/* IR Sample Config */
-+#define SUNXI_IR_CIR_REG 0x34
-+/* CIR_REG register noise threshold */
-+#define REG_CIR_NTHR(val) (((val) << 2) & (GENMASK(7, 2)))
-+/* CIR_REG register idle threshold */
-+#define REG_CIR_ITHR(val) (((val) << 8) & (GENMASK(15, 8)))
-+
-+/* Hardware supported fifo size */
-+#define SUNXI_IR_FIFO_SIZE 16
-+/* How many messages in FIFO trigger IRQ */
-+#define TRIGGER_LEVEL 8
-+/* Required frequency for IR0 or IR1 clock in CIR mode */
-+#define SUNXI_IR_BASE_CLK 8000000
-+/* Frequency after IR internal divider */
-+#define SUNXI_IR_CLK (SUNXI_IR_BASE_CLK / 64)
-+/* Sample period in ns */
-+#define SUNXI_IR_SAMPLE (1000000000ul / SUNXI_IR_CLK)
-+/* Noise threshold in samples */
-+#define SUNXI_IR_RXNOISE 1
-+/* Idle Threshold in samples */
-+#define SUNXI_IR_RXIDLE 20
-+/* Time after which device stops sending data in ms */
-+#define SUNXI_IR_TIMEOUT 120
-+
-+struct sunxi_ir {
-+ spinlock_t ir_lock;
-+ struct rc_dev *rc;
-+ void __iomem *base;
-+ int irq;
-+ struct clk *clk;
-+ struct clk *apb_clk;
-+ const char *map_name;
-+};
-+
-+static irqreturn_t sunxi_ir_irq(int irqno, void *dev_id)
-+{
-+ unsigned long status;
-+ unsigned char dt;
-+ unsigned int cnt, rc;
-+ struct sunxi_ir *ir = dev_id;
-+ DEFINE_IR_RAW_EVENT(rawir);
-+
-+ spin_lock(&ir->ir_lock);
-+
-+ status = readl(ir->base + SUNXI_IR_RXSTA_REG);
-+
-+ /* clean all pending statuses */
-+ writel(status | REG_RXSTA_CLEARALL, ir->base + SUNXI_IR_RXSTA_REG);
-+
-+ if (status & REG_RXINT_RAI_EN) {
-+ /* How many messages in fifo */
-+ rc = REG_RXSTA_GET_AC(status);
-+ /* Sanity check */
-+ rc = rc > SUNXI_IR_FIFO_SIZE ? SUNXI_IR_FIFO_SIZE : rc;
-+ /* If we have data */
-+ for (cnt = 0; cnt < rc; cnt++) {
-+ /* for each bit in fifo */
-+ dt = readb(ir->base + SUNXI_IR_RXFIFO_REG);
-+ rawir.pulse = (dt & 0x80) != 0;
-+ rawir.duration = ((dt & 0x7f) + 1) * SUNXI_IR_SAMPLE;
-+ ir_raw_event_store_with_filter(ir->rc, &rawir);
-+ }
-+ }
-+
-+ if (status & REG_RXINT_ROI_EN) {
-+ ir_raw_event_reset(ir->rc);
-+ } else if (status & REG_RXINT_RPEI_EN) {
-+ ir_raw_event_set_idle(ir->rc, true);
-+ ir_raw_event_handle(ir->rc);
-+ }
-+
-+ spin_unlock(&ir->ir_lock);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int sunxi_ir_probe(struct platform_device *pdev)
-+{
-+ int ret = 0;
-+ unsigned long tmp = 0;
-+
-+ struct device *dev = &pdev->dev;
-+ struct device_node *dn = dev->of_node;
-+ struct resource *res;
-+ struct sunxi_ir *ir;
-+
-+ ir = devm_kzalloc(dev, sizeof(struct sunxi_ir), GFP_KERNEL);
-+ if (!ir)
-+ return -ENOMEM;
-+
-+ /* Clock */
-+ ir->apb_clk = devm_clk_get(dev, "apb");
-+ if (IS_ERR(ir->apb_clk)) {
-+ dev_err(dev, "failed to get a apb clock.\n");
-+ return PTR_ERR(ir->apb_clk);
-+ }
-+ ir->clk = devm_clk_get(dev, "ir");
-+ if (IS_ERR(ir->clk)) {
-+ dev_err(dev, "failed to get a ir clock.\n");
-+ return PTR_ERR(ir->clk);
-+ }
-+
-+ ret = clk_set_rate(ir->clk, SUNXI_IR_BASE_CLK);
-+ if (ret) {
-+ dev_err(dev, "set ir base clock failed!\n");
-+ return ret;
-+ }
-+
-+ if (clk_prepare_enable(ir->apb_clk)) {
-+ dev_err(dev, "try to enable apb_ir_clk failed\n");
-+ return -EINVAL;
-+ }
-+
-+ if (clk_prepare_enable(ir->clk)) {
-+ dev_err(dev, "try to enable ir_clk failed\n");
-+ ret = -EINVAL;
-+ goto exit_clkdisable_apb_clk;
-+ }
-+
-+ /* IO */
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ ir->base = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(ir->base)) {
-+ dev_err(dev, "failed to map registers\n");
-+ ret = PTR_ERR(ir->base);
-+ goto exit_clkdisable_clk;
-+ }
-+
-+ ir->rc = rc_allocate_device();
-+ if (!ir->rc) {
-+ dev_err(dev, "failed to allocate device\n");
-+ ret = -ENOMEM;
-+ goto exit_clkdisable_clk;
-+ }
-+
-+ ir->rc->priv = ir;
-+ ir->rc->input_name = SUNXI_IR_DEV;
-+ ir->rc->input_phys = "sunxi-ir/input0";
-+ ir->rc->input_id.bustype = BUS_HOST;
-+ ir->rc->input_id.vendor = 0x0001;
-+ ir->rc->input_id.product = 0x0001;
-+ ir->rc->input_id.version = 0x0100;
-+ ir->map_name = of_get_property(dn, "linux,rc-map-name", NULL);
-+ ir->rc->map_name = ir->map_name ?: RC_MAP_EMPTY;
-+ ir->rc->dev.parent = dev;
-+ ir->rc->driver_type = RC_DRIVER_IR_RAW;
-+ rc_set_allowed_protocols(ir->rc, RC_BIT_ALL);
-+ ir->rc->rx_resolution = SUNXI_IR_SAMPLE;
-+ ir->rc->timeout = MS_TO_NS(SUNXI_IR_TIMEOUT);
-+ ir->rc->driver_name = SUNXI_IR_DEV;
-+
-+ ret = rc_register_device(ir->rc);
-+ if (ret) {
-+ dev_err(dev, "failed to register rc device\n");
-+ goto exit_free_dev;
-+ }
-+
-+ platform_set_drvdata(pdev, ir);
-+
-+ /* IRQ */
-+ ir->irq = platform_get_irq(pdev, 0);
-+ if (ir->irq < 0) {
-+ dev_err(dev, "no irq resource\n");
-+ ret = ir->irq;
-+ goto exit_free_dev;
-+ }
-+
-+ ret = devm_request_irq(dev, ir->irq, sunxi_ir_irq, 0, SUNXI_IR_DEV, ir);
-+ if (ret) {
-+ dev_err(dev, "failed request irq\n");
-+ goto exit_free_dev;
-+ }
-+
-+ /* Enable CIR Mode */
-+ writel(REG_CTL_MD, ir->base+SUNXI_IR_CTL_REG);
-+
-+ /* Set noise threshold and idle threshold */
-+ writel(REG_CIR_NTHR(SUNXI_IR_RXNOISE)|REG_CIR_ITHR(SUNXI_IR_RXIDLE),
-+ ir->base + SUNXI_IR_CIR_REG);
-+
-+ /* Invert Input Signal */
-+ writel(REG_RXCTL_RPPI, ir->base + SUNXI_IR_RXCTL_REG);
-+
-+ /* Clear All Rx Interrupt Status */
-+ writel(REG_RXSTA_CLEARALL, ir->base + SUNXI_IR_RXSTA_REG);
-+
-+ /*
-+ * Enable IRQ on overflow, packet end, FIFO available with trigger
-+ * level
-+ */
-+ writel(REG_RXINT_ROI_EN | REG_RXINT_RPEI_EN |
-+ REG_RXINT_RAI_EN | REG_RXINT_RAL(TRIGGER_LEVEL - 1),
-+ ir->base + SUNXI_IR_RXINT_REG);
-+
-+ /* Enable IR Module */
-+ tmp = readl(ir->base + SUNXI_IR_CTL_REG);
-+ writel(tmp | REG_CTL_GEN | REG_CTL_RXEN, ir->base + SUNXI_IR_CTL_REG);
-+
-+ dev_info(dev, "initialized sunXi IR driver\n");
-+ return 0;
-+
-+exit_free_dev:
-+ rc_free_device(ir->rc);
-+exit_clkdisable_clk:
-+ clk_disable_unprepare(ir->clk);
-+exit_clkdisable_apb_clk:
-+ clk_disable_unprepare(ir->apb_clk);
-+
-+ return ret;
-+}
-+
-+static int sunxi_ir_remove(struct platform_device *pdev)
-+{
-+ unsigned long flags;
-+ struct sunxi_ir *ir = platform_get_drvdata(pdev);
-+
-+ clk_disable_unprepare(ir->clk);
-+ clk_disable_unprepare(ir->apb_clk);
-+
-+ spin_lock_irqsave(&ir->ir_lock, flags);
-+ /* disable IR IRQ */
-+ writel(0, ir->base + SUNXI_IR_RXINT_REG);
-+ /* clear All Rx Interrupt Status */
-+ writel(REG_RXSTA_CLEARALL, ir->base + SUNXI_IR_RXSTA_REG);
-+ /* disable IR */
-+ writel(0, ir->base + SUNXI_IR_CTL_REG);
-+ spin_unlock_irqrestore(&ir->ir_lock, flags);
-+
-+ rc_unregister_device(ir->rc);
-+ return 0;
-+}
-+
-+static const struct of_device_id sunxi_ir_match[] = {
-+ { .compatible = "allwinner,sun7i-a20-ir", },
-+ {},
-+};
-+
-+static struct platform_driver sunxi_ir_driver = {
-+ .probe = sunxi_ir_probe,
-+ .remove = sunxi_ir_remove,
-+ .driver = {
-+ .name = SUNXI_IR_DEV,
-+ .owner = THIS_MODULE,
-+ .of_match_table = sunxi_ir_match,
-+ },
-+};
-+
-+module_platform_driver(sunxi_ir_driver);
-+
-+MODULE_DESCRIPTION("Allwinner sunXi IR controller driver");
-+MODULE_AUTHOR("Alexsey Shestacov <wingrime@linux-sunxi.org>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/sunxi/patches-3.14/281-dt-sun7i-add-ir-pins.patch b/target/linux/sunxi/patches-3.14/281-dt-sun7i-add-ir-pins.patch
deleted file mode 100644
index 2389cf8859..0000000000
--- a/target/linux/sunxi/patches-3.14/281-dt-sun7i-add-ir-pins.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 7720fe5faadae243806833c7a7ec5d15bae244c4 Mon Sep 17 00:00:00 2001
-From: Alexander Bersenev <bay@hackerdom.ru>
-Date: Mon, 9 Jun 2014 00:08:11 +0600
-Subject: [PATCH] ARM: sunxi: Add pins for IR controller on A20 to dtsi
-
-This patch adds pins for two IR controllers on A20
-
-Signed-off-by: Alexander Bersenev <bay@hackerdom.ru>
-Signed-off-by: Alexsey Shestacov <wingrime@linux-sunxi.org>
----
- arch/arm/boot/dts/sun7i-a20.dtsi | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -746,6 +746,20 @@
- allwinner,drive = <2>;
- allwinner,pull = <0>;
- };
-+
-+ ir0_pins_a: ir0@0 {
-+ allwinner,pins = "PB3","PB4";
-+ allwinner,function = "ir0";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
-+
-+ ir1_pins_a: ir1@0 {
-+ allwinner,pins = "PB22","PB23";
-+ allwinner,function = "ir1";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
- };
-
- timer@01c20c00 {
diff --git a/target/linux/sunxi/patches-3.14/282-dt-sun7i-add-ir-ctrlers.patch b/target/linux/sunxi/patches-3.14/282-dt-sun7i-add-ir-ctrlers.patch
deleted file mode 100644
index f5763badd5..0000000000
--- a/target/linux/sunxi/patches-3.14/282-dt-sun7i-add-ir-ctrlers.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 0af3258f87d590864187b0187c7aa7428801ef80 Mon Sep 17 00:00:00 2001
-From: Alexander Bersenev <bay@hackerdom.ru>
-Date: Mon, 9 Jun 2014 00:08:12 +0600
-Subject: [PATCH] ARM: sunxi: Add IR controllers on A20 to dtsi
-
-This patch adds records for two IR controllers on A20
-
-Signed-off-by: Alexander Bersenev <bay@hackerdom.ru>
-Signed-off-by: Alexsey Shestacov <wingrime@linux-sunxi.org>
----
- arch/arm/boot/dts/sun7i-a20.dtsi | 18 ++++++++++++++++++
- 1 file changed, 18 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20.dtsi
-+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -785,6 +785,24 @@
- interrupts = <0 24 4>;
- };
-
-+ ir0: ir@01c21800 {
-+ compatible = "allwinner,sun7i-a20-ir";
-+ clocks = <&apb0_gates 6>, <&ir0_clk>;
-+ clock-names = "apb", "ir";
-+ interrupts = <0 5 4>;
-+ reg = <0x01c21800 0x40>;
-+ status = "disabled";
-+ };
-+
-+ ir1: ir@01c21c00 {
-+ compatible = "allwinner,sun7i-a20-ir";
-+ clocks = <&apb0_gates 7>, <&ir1_clk>;
-+ clock-names = "apb", "ir";
-+ interrupts = <0 6 4>;
-+ reg = <0x01c21c00 0x40>;
-+ status = "disabled";
-+ };
-+
- lradc: lradc@01c22800 {
- compatible = "allwinner,sun4i-lradc-keys";
- reg = <0x01c22800 0x100>;
diff --git a/target/linux/sunxi/patches-3.14/283-dt-sun7i-add-ir-to-cb2-cbt.patch b/target/linux/sunxi/patches-3.14/283-dt-sun7i-add-ir-to-cb2-cbt.patch
deleted file mode 100644
index aceb56697e..0000000000
--- a/target/linux/sunxi/patches-3.14/283-dt-sun7i-add-ir-to-cb2-cbt.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-From 05cffcda932b0914d78a08891c13e61593a6ce02 Mon Sep 17 00:00:00 2001
-From: Alexander Bersenev <bay@hackerdom.ru>
-Date: Mon, 9 Jun 2014 00:08:13 +0600
-Subject: [PATCH] ARM: sunxi: Enable IR controller on cubieboard 2 and
- cubietruck in dts
-
-This patch enables two IR devices in dts:
-- One IR device physically found on Cubieboard 2
-- One IR device physically found on Cubietruck
-
-Signed-off-by: Alexander Bersenev <bay@hackerdom.ru>
-Signed-off-by: Alexsey Shestacov <wingrime@linux-sunxi.org>
----
- arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 6 ++++++
- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 6 ++++++
- 2 files changed, 12 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
-@@ -64,6 +64,12 @@
- };
- };
-
-+ ir0: ir@01c21800 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&ir0_pins_a>;
-+ status = "okay";
-+ };
-+
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
---- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-@@ -114,6 +114,12 @@
- };
- };
-
-+ ir0: ir@01c21800 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&ir0_pins_a>;
-+ status = "okay";
-+ };
-+
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
diff --git a/target/linux/sunxi/patches-3.14/284-ir-backports-from-3.15.patch b/target/linux/sunxi/patches-3.14/284-ir-backports-from-3.15.patch
deleted file mode 100644
index 9e703e7dce..0000000000
--- a/target/linux/sunxi/patches-3.14/284-ir-backports-from-3.15.patch
+++ /dev/null
@@ -1,1210 +0,0 @@
-From 00942d1a1bd93ac108c1b92d504c568a37be1833 Mon Sep 17 00:00:00 2001
-From: James Hogan <james.hogan@imgtec.com>
-Date: Fri, 17 Jan 2014 10:58:49 -0300
-Subject: [PATCH] [media] media: rc: add sysfs scancode filtering interface
-
-Add and document a generic sysfs based scancode filtering interface for
-making use of IR data matching hardware to filter out uninteresting
-scancodes. Two filters exist, one for normal operation and one for
-filtering scancodes which are permitted to wake the system from suspend.
-
-The following files are added to /sys/class/rc/rc?/:
- - filter: normal scancode filter value
- - filter_mask: normal scancode filter mask
- - wakeup_filter: wakeup scancode filter value
- - wakeup_filter_mask: wakeup scancode filter mask
-
-A new s_filter() driver callback is added which must arrange for the
-specified filter to be applied at the right time. Drivers can convert
-the scancode filter into a raw IR data filter, which can be applied
-immediately or later (for wake up filters).
-
-Signed-off-by: James Hogan <james.hogan@imgtec.com>
-Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
-Cc: linux-media@vger.kernel.org
-Cc: Rob Landley <rob@landley.net>
-Cc: linux-doc@vger.kernel.org
-Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
----
- Documentation/ABI/testing/sysfs-class-rc | 58 +++++++++++++
- drivers/media/rc/rc-main.c | 136 +++++++++++++++++++++++++++++++
- include/media/rc-core.h | 29 +++++++
- 3 files changed, 223 insertions(+)
-
-From 7b802ce7e8c67510389fdbbe29edd87a75df3a93 Mon Sep 17 00:00:00 2001
-From: James Hogan <james.hogan@imgtec.com>
-Date: Mon, 10 Feb 2014 18:31:56 -0300
-Subject: [PATCH] [media] rc-main: store_filter: pass errors to userland
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Propagate errors returned by drivers from the s_filter callback back to
-userland when updating scancode filters. This allows userland to see
-when the filter couldn't be updated, usually because it's not a valid
-filter for the hardware.
-
-Previously the filter was being updated conditionally on success of
-s_filter, but the write always reported success back to userland.
-
-Reported-by: Antti Seppälä <a.seppala@gmail.com>
-Signed-off-by: James Hogan <james.hogan@imgtec.com>
-Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
----
- drivers/media/rc/rc-main.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-From b8c7d915087c97a21fa415fa0e860e59739da202 Mon Sep 17 00:00:00 2001
-From: James Hogan <james.hogan@imgtec.com>
-Date: Fri, 28 Feb 2014 20:17:02 -0300
-Subject: [PATCH] [media] rc-main: add generic scancode filtering
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add generic scancode filtering of RC input events, and fall back to
-permitting any RC_FILTER_NORMAL scancode filter to be set if no s_filter
-callback exists. This allows raw IR decoder events to be filtered, and
-potentially allows hardware decoders to set looser filters and rely on
-generic code to filter out the corner cases.
-
-Signed-off-by: James Hogan <james.hogan@imgtec.com>
-Reviewed-by: Antti Seppälä <a.seppala@gmail.com>
-Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
----
- drivers/media/rc/rc-main.c | 20 +++++++++++++-------
- 1 file changed, 13 insertions(+), 7 deletions(-)
-
-From 1a1934fab0c920f0d3bceeb60c9fe2dae8a56be9 Mon Sep 17 00:00:00 2001
-From: James Hogan <james.hogan@imgtec.com>
-Date: Fri, 28 Feb 2014 20:17:03 -0300
-Subject: [PATCH] [media] rc: abstract access to allowed/enabled protocols
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The allowed and enabled protocol masks need to be expanded to be per
-filter type in order to support wakeup filter protocol selection. To
-ease that process abstract access to the rc_dev::allowed_protos and
-rc_dev::enabled_protocols members with inline functions.
-
-Signed-off-by: James Hogan <james.hogan@imgtec.com>
-Reviewed-by: Antti Seppälä <a.seppala@gmail.com>
-Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
----
- drivers/hid/hid-picolcd_cir.c | 2 +-
- drivers/media/common/siano/smsir.c | 2 +-
- drivers/media/i2c/ir-kbd-i2c.c | 4 ++--
- drivers/media/pci/cx23885/cx23885-input.c | 2 +-
- drivers/media/pci/cx88/cx88-input.c | 2 +-
- drivers/media/rc/ati_remote.c | 2 +-
- drivers/media/rc/ene_ir.c | 2 +-
- drivers/media/rc/fintek-cir.c | 2 +-
- drivers/media/rc/gpio-ir-recv.c | 4 ++--
- drivers/media/rc/iguanair.c | 2 +-
- drivers/media/rc/imon.c | 7 ++++---
- drivers/media/rc/ir-jvc-decoder.c | 2 +-
- drivers/media/rc/ir-lirc-codec.c | 2 +-
- drivers/media/rc/ir-mce_kbd-decoder.c | 2 +-
- drivers/media/rc/ir-nec-decoder.c | 2 +-
- drivers/media/rc/ir-raw.c | 2 +-
- drivers/media/rc/ir-rc5-decoder.c | 6 +++---
- drivers/media/rc/ir-rc5-sz-decoder.c | 2 +-
- drivers/media/rc/ir-rc6-decoder.c | 6 +++---
- drivers/media/rc/ir-sanyo-decoder.c | 2 +-
- drivers/media/rc/ir-sharp-decoder.c | 2 +-
- drivers/media/rc/ir-sony-decoder.c | 10 +++++-----
- drivers/media/rc/ite-cir.c | 2 +-
- drivers/media/rc/mceusb.c | 2 +-
- drivers/media/rc/nuvoton-cir.c | 2 +-
- drivers/media/rc/rc-loopback.c | 2 +-
- drivers/media/rc/redrat3.c | 2 +-
- drivers/media/rc/st_rc.c | 2 +-
- drivers/media/rc/streamzap.c | 2 +-
- drivers/media/rc/ttusbir.c | 2 +-
- drivers/media/rc/winbond-cir.c | 2 +-
- drivers/media/usb/dvb-usb-v2/dvb_usb_core.c | 2 +-
- drivers/media/usb/dvb-usb/dvb-usb-remote.c | 2 +-
- drivers/media/usb/em28xx/em28xx-input.c | 8 ++++----
- drivers/media/usb/tm6000/tm6000-input.c | 2 +-
- include/media/rc-core.h | 22 ++++++++++++++++++++++
- 36 files changed, 73 insertions(+), 50 deletions(-)
-
-From acff5f24732acc8a55d0a0f0ee1d19442267df63 Mon Sep 17 00:00:00 2001
-From: James Hogan <james.hogan@imgtec.com>
-Date: Fri, 28 Feb 2014 20:17:04 -0300
-Subject: [PATCH] [media] rc: add allowed/enabled wakeup protocol masks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Only a single allowed and enabled protocol mask currently exists in
-struct rc_dev, however to support a separate wakeup filter protocol two
-of each are needed, ideally as an array.
-
-Therefore make both rc_dev::allowed_protos and rc_dev::enabled_protocols
-arrays, update all users to reference the first element
-(RC_FILTER_NORMAL), and add a couple more helper functions for drivers
-to use for setting the allowed and enabled wakeup protocols.
-
-We also rename allowed_protos to allowed_protocols while we're at it,
-which is more consistent with enabled_protocols.
-
-Signed-off-by: James Hogan <james.hogan@imgtec.com>
-Reviewed-by: Antti Seppälä <a.seppala@gmail.com>
-Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
----
- drivers/media/rc/rc-main.c | 10 +++++-----
- include/media/rc-core.h | 32 ++++++++++++++++++++++++--------
- 2 files changed, 29 insertions(+), 13 deletions(-)
-
-From ab88c66deace78989aa71cb139284cf7fb227ba4 Mon Sep 17 00:00:00 2001
-From: James Hogan <james.hogan@imgtec.com>
-Date: Fri, 28 Feb 2014 20:17:05 -0300
-Subject: [PATCH] [media] rc: add wakeup_protocols sysfs file
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add a wakeup_protocols sysfs file which controls the new
-rc_dev::enabled_protocols[RC_FILTER_WAKEUP], which is the mask of
-protocols that are used for the wakeup filter.
-
-A new RC driver callback change_wakeup_protocol() is called to change
-the wakeup protocol mask.
-
-Signed-off-by: James Hogan <james.hogan@imgtec.com>
-Reviewed-by: Antti Seppälä <a.seppala@gmail.com>
-Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
----
- Documentation/ABI/testing/sysfs-class-rc | 23 +++++-
- .../DocBook/media/v4l/remote_controllers.xml | 20 +++++-
- drivers/media/rc/rc-main.c | 82 +++++++++++++---------
- include/media/rc-core.h | 3 +
- 4 files changed, 90 insertions(+), 38 deletions(-)
-
-From 6bea25af147fcddcd8fd4557f4184c847c5c6ffd Mon Sep 17 00:00:00 2001
-From: James Hogan <james.hogan@imgtec.com>
-Date: Fri, 28 Feb 2014 20:17:06 -0300
-Subject: [PATCH] [media] rc-main: automatically refresh filter on protocol
- change
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-When either of the normal or wakeup filter protocols are changed,
-refresh the corresponding scancode filter, i.e. try and set the same
-scancode filter with the new protocol. If that fails clear the filter
-instead.
-
-If no protocol was selected the filter is just cleared, and if no
-s_filter callback exists the filter is left unmodified.
-
-Similarly clear the filter mask when the filter is set if no protocol is
-currently selected.
-
-This simplifies driver code which no longer has to explicitly worry
-about modifying the filter on a protocol change. This also allows the
-change_wakeup_protocol callback to be omitted entirely if there is only
-a single available wakeup protocol at a time, since selecting no
-protocol will automatically clear the wakeup filter, disabling wakeup.
-
-Signed-off-by: James Hogan <james.hogan@imgtec.com>
-Reviewed-by: Antti Seppälä <a.seppala@gmail.com>
-Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
----
- drivers/media/rc/rc-main.c | 41 +++++++++++++++++++++++++++++++++++++++--
- 1 file changed, 39 insertions(+), 2 deletions(-)
-
-From 262912335c823a2bbcc87003ee55d62cc27f4e48 Mon Sep 17 00:00:00 2001
-From: James Hogan <james.hogan@imgtec.com>
-Date: Sat, 1 Mar 2014 19:52:25 -0300
-Subject: [PATCH] [media] rc-main: fix missing unlock if no devno left
-
-While playing with make coccicheck I noticed this message:
-drivers/media/rc/rc-main.c:1245:3-9: preceding lock on line 1238
-
-It was introduced by commit 587d1b06e07b ([media] rc-core: reuse device
-numbers) which returns -ENOMEM after a mutex_lock without first
-unlocking it when there are no more device numbers left. The added code
-doesn't depend on the device lock, so move it before the lock is taken.
-
-Signed-off-by: James Hogan <james.hogan@imgtec.com>
-Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
----
- drivers/media/rc/rc-main.c | 16 ++++++++--------
- 1 file changed, 8 insertions(+), 8 deletions(-)
-
---- a/drivers/hid/hid-picolcd_cir.c
-+++ b/drivers/hid/hid-picolcd_cir.c
-@@ -114,7 +114,7 @@ int picolcd_init_cir(struct picolcd_data
-
- rdev->priv = data;
- rdev->driver_type = RC_DRIVER_IR_RAW;
-- rdev->allowed_protos = RC_BIT_ALL;
-+ rc_set_allowed_protocols(rdev, RC_BIT_ALL);
- rdev->open = picolcd_cir_open;
- rdev->close = picolcd_cir_close;
- rdev->input_name = data->hdev->name;
---- a/drivers/media/common/siano/smsir.c
-+++ b/drivers/media/common/siano/smsir.c
-@@ -88,7 +88,7 @@ int sms_ir_init(struct smscore_device_t
-
- dev->priv = coredev;
- dev->driver_type = RC_DRIVER_IR_RAW;
-- dev->allowed_protos = RC_BIT_ALL;
-+ rc_set_allowed_protocols(dev, RC_BIT_ALL);
- dev->map_name = sms_get_board(board_id)->rc_codes;
- dev->driver_name = MODULE_NAME;
-
---- a/drivers/media/i2c/ir-kbd-i2c.c
-+++ b/drivers/media/i2c/ir-kbd-i2c.c
-@@ -431,8 +431,8 @@ static int ir_probe(struct i2c_client *c
- * Initialize the other fields of rc_dev
- */
- rc->map_name = ir->ir_codes;
-- rc->allowed_protos = rc_type;
-- rc->enabled_protocols = rc_type;
-+ rc_set_allowed_protocols(rc, rc_type);
-+ rc_set_enabled_protocols(rc, rc_type);
- if (!rc->driver_name)
- rc->driver_name = MODULE_NAME;
-
---- a/drivers/media/pci/cx23885/cx23885-input.c
-+++ b/drivers/media/pci/cx23885/cx23885-input.c
-@@ -346,7 +346,7 @@ int cx23885_input_init(struct cx23885_de
- }
- rc->dev.parent = &dev->pci->dev;
- rc->driver_type = driver_type;
-- rc->allowed_protos = allowed_protos;
-+ rc_set_allowed_protocols(rc, allowed_protos);
- rc->priv = kernel_ir;
- rc->open = cx23885_input_ir_open;
- rc->close = cx23885_input_ir_close;
---- a/drivers/media/pci/cx88/cx88-input.c
-+++ b/drivers/media/pci/cx88/cx88-input.c
-@@ -469,7 +469,7 @@ int cx88_ir_init(struct cx88_core *core,
- dev->timeout = 10 * 1000 * 1000; /* 10 ms */
- } else {
- dev->driver_type = RC_DRIVER_SCANCODE;
-- dev->allowed_protos = rc_type;
-+ rc_set_allowed_protocols(dev, rc_type);
- }
-
- ir->core = core;
---- a/drivers/media/rc/ati_remote.c
-+++ b/drivers/media/rc/ati_remote.c
-@@ -784,7 +784,7 @@ static void ati_remote_rc_init(struct at
-
- rdev->priv = ati_remote;
- rdev->driver_type = RC_DRIVER_SCANCODE;
-- rdev->allowed_protos = RC_BIT_OTHER;
-+ rc_set_allowed_protocols(rdev, RC_BIT_OTHER);
- rdev->driver_name = "ati_remote";
-
- rdev->open = ati_remote_rc_open;
---- a/drivers/media/rc/ene_ir.c
-+++ b/drivers/media/rc/ene_ir.c
-@@ -1059,7 +1059,7 @@ static int ene_probe(struct pnp_dev *pnp
- learning_mode_force = false;
-
- rdev->driver_type = RC_DRIVER_IR_RAW;
-- rdev->allowed_protos = RC_BIT_ALL;
-+ rc_set_allowed_protocols(rdev, RC_BIT_ALL);
- rdev->priv = dev;
- rdev->open = ene_open;
- rdev->close = ene_close;
---- a/drivers/media/rc/fintek-cir.c
-+++ b/drivers/media/rc/fintek-cir.c
-@@ -541,7 +541,7 @@ static int fintek_probe(struct pnp_dev *
- /* Set up the rc device */
- rdev->priv = fintek;
- rdev->driver_type = RC_DRIVER_IR_RAW;
-- rdev->allowed_protos = RC_BIT_ALL;
-+ rc_set_allowed_protocols(rdev, RC_BIT_ALL);
- rdev->open = fintek_open;
- rdev->close = fintek_close;
- rdev->input_name = FINTEK_DESCRIPTION;
---- a/drivers/media/rc/gpio-ir-recv.c
-+++ b/drivers/media/rc/gpio-ir-recv.c
-@@ -145,9 +145,9 @@ static int gpio_ir_recv_probe(struct pla
- rcdev->dev.parent = &pdev->dev;
- rcdev->driver_name = GPIO_IR_DRIVER_NAME;
- if (pdata->allowed_protos)
-- rcdev->allowed_protos = pdata->allowed_protos;
-+ rc_set_allowed_protocols(rcdev, pdata->allowed_protos);
- else
-- rcdev->allowed_protos = RC_BIT_ALL;
-+ rc_set_allowed_protocols(rcdev, RC_BIT_ALL);
- rcdev->map_name = pdata->map_name ?: RC_MAP_EMPTY;
-
- gpio_dev->rcdev = rcdev;
---- a/drivers/media/rc/iguanair.c
-+++ b/drivers/media/rc/iguanair.c
-@@ -494,7 +494,7 @@ static int iguanair_probe(struct usb_int
- usb_to_input_id(ir->udev, &rc->input_id);
- rc->dev.parent = &intf->dev;
- rc->driver_type = RC_DRIVER_IR_RAW;
-- rc->allowed_protos = RC_BIT_ALL;
-+ rc_set_allowed_protocols(rc, RC_BIT_ALL);
- rc->priv = ir;
- rc->open = iguanair_open;
- rc->close = iguanair_close;
---- a/drivers/media/rc/imon.c
-+++ b/drivers/media/rc/imon.c
-@@ -1017,7 +1017,7 @@ static int imon_ir_change_protocol(struc
- unsigned char ir_proto_packet[] = {
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 };
-
-- if (*rc_type && !(*rc_type & rc->allowed_protos))
-+ if (*rc_type && !rc_protocols_allowed(rc, *rc_type))
- dev_warn(dev, "Looks like you're trying to use an IR protocol "
- "this device does not support\n");
-
-@@ -1867,7 +1867,8 @@ static struct rc_dev *imon_init_rdev(str
-
- rdev->priv = ictx;
- rdev->driver_type = RC_DRIVER_SCANCODE;
-- rdev->allowed_protos = RC_BIT_OTHER | RC_BIT_RC6_MCE; /* iMON PAD or MCE */
-+ /* iMON PAD or MCE */
-+ rc_set_allowed_protocols(rdev, RC_BIT_OTHER | RC_BIT_RC6_MCE);
- rdev->change_protocol = imon_ir_change_protocol;
- rdev->driver_name = MOD_NAME;
-
-@@ -1880,7 +1881,7 @@ static struct rc_dev *imon_init_rdev(str
-
- if (ictx->product == 0xffdc) {
- imon_get_ffdc_type(ictx);
-- rdev->allowed_protos = ictx->rc_type;
-+ rc_set_allowed_protocols(rdev, ictx->rc_type);
- }
-
- imon_set_display_type(ictx);
---- a/drivers/media/rc/ir-jvc-decoder.c
-+++ b/drivers/media/rc/ir-jvc-decoder.c
-@@ -47,7 +47,7 @@ static int ir_jvc_decode(struct rc_dev *
- {
- struct jvc_dec *data = &dev->raw->jvc;
-
-- if (!(dev->enabled_protocols & RC_BIT_JVC))
-+ if (!rc_protocols_enabled(dev, RC_BIT_JVC))
- return 0;
-
- if (!is_timing_event(ev)) {
---- a/drivers/media/rc/ir-lirc-codec.c
-+++ b/drivers/media/rc/ir-lirc-codec.c
-@@ -35,7 +35,7 @@ static int ir_lirc_decode(struct rc_dev
- struct lirc_codec *lirc = &dev->raw->lirc;
- int sample;
-
-- if (!(dev->enabled_protocols & RC_BIT_LIRC))
-+ if (!rc_protocols_enabled(dev, RC_BIT_LIRC))
- return 0;
-
- if (!dev->raw->lirc.drv || !dev->raw->lirc.drv->rbuf)
---- a/drivers/media/rc/ir-mce_kbd-decoder.c
-+++ b/drivers/media/rc/ir-mce_kbd-decoder.c
-@@ -216,7 +216,7 @@ static int ir_mce_kbd_decode(struct rc_d
- u32 scancode;
- unsigned long delay;
-
-- if (!(dev->enabled_protocols & RC_BIT_MCE_KBD))
-+ if (!rc_protocols_enabled(dev, RC_BIT_MCE_KBD))
- return 0;
-
- if (!is_timing_event(ev)) {
---- a/drivers/media/rc/ir-nec-decoder.c
-+++ b/drivers/media/rc/ir-nec-decoder.c
-@@ -52,7 +52,7 @@ static int ir_nec_decode(struct rc_dev *
- u8 address, not_address, command, not_command;
- bool send_32bits = false;
-
-- if (!(dev->enabled_protocols & RC_BIT_NEC))
-+ if (!rc_protocols_enabled(dev, RC_BIT_NEC))
- return 0;
-
- if (!is_timing_event(ev)) {
---- a/drivers/media/rc/ir-raw.c
-+++ b/drivers/media/rc/ir-raw.c
-@@ -256,7 +256,7 @@ int ir_raw_event_register(struct rc_dev
- return -ENOMEM;
-
- dev->raw->dev = dev;
-- dev->enabled_protocols = ~0;
-+ rc_set_enabled_protocols(dev, ~0);
- rc = kfifo_alloc(&dev->raw->kfifo,
- sizeof(struct ir_raw_event) * MAX_IR_EVENT_SIZE,
- GFP_KERNEL);
---- a/drivers/media/rc/ir-rc5-decoder.c
-+++ b/drivers/media/rc/ir-rc5-decoder.c
-@@ -52,7 +52,7 @@ static int ir_rc5_decode(struct rc_dev *
- u8 toggle;
- u32 scancode;
-
-- if (!(dev->enabled_protocols & (RC_BIT_RC5 | RC_BIT_RC5X)))
-+ if (!rc_protocols_enabled(dev, RC_BIT_RC5 | RC_BIT_RC5X))
- return 0;
-
- if (!is_timing_event(ev)) {
-@@ -128,7 +128,7 @@ again:
- if (data->wanted_bits == RC5X_NBITS) {
- /* RC5X */
- u8 xdata, command, system;
-- if (!(dev->enabled_protocols & RC_BIT_RC5X)) {
-+ if (!rc_protocols_enabled(dev, RC_BIT_RC5X)) {
- data->state = STATE_INACTIVE;
- return 0;
- }
-@@ -145,7 +145,7 @@ again:
- } else {
- /* RC5 */
- u8 command, system;
-- if (!(dev->enabled_protocols & RC_BIT_RC5)) {
-+ if (!rc_protocols_enabled(dev, RC_BIT_RC5)) {
- data->state = STATE_INACTIVE;
- return 0;
- }
---- a/drivers/media/rc/ir-rc5-sz-decoder.c
-+++ b/drivers/media/rc/ir-rc5-sz-decoder.c
-@@ -48,7 +48,7 @@ static int ir_rc5_sz_decode(struct rc_de
- u8 toggle, command, system;
- u32 scancode;
-
-- if (!(dev->enabled_protocols & RC_BIT_RC5_SZ))
-+ if (!rc_protocols_enabled(dev, RC_BIT_RC5_SZ))
- return 0;
-
- if (!is_timing_event(ev)) {
---- a/drivers/media/rc/ir-rc6-decoder.c
-+++ b/drivers/media/rc/ir-rc6-decoder.c
-@@ -89,9 +89,9 @@ static int ir_rc6_decode(struct rc_dev *
- u32 scancode;
- u8 toggle;
-
-- if (!(dev->enabled_protocols &
-- (RC_BIT_RC6_0 | RC_BIT_RC6_6A_20 | RC_BIT_RC6_6A_24 |
-- RC_BIT_RC6_6A_32 | RC_BIT_RC6_MCE)))
-+ if (!rc_protocols_enabled(dev, RC_BIT_RC6_0 | RC_BIT_RC6_6A_20 |
-+ RC_BIT_RC6_6A_24 | RC_BIT_RC6_6A_32 |
-+ RC_BIT_RC6_MCE))
- return 0;
-
- if (!is_timing_event(ev)) {
---- a/drivers/media/rc/ir-sanyo-decoder.c
-+++ b/drivers/media/rc/ir-sanyo-decoder.c
-@@ -58,7 +58,7 @@ static int ir_sanyo_decode(struct rc_dev
- u32 scancode;
- u8 address, command, not_command;
-
-- if (!(dev->enabled_protocols & RC_BIT_SANYO))
-+ if (!rc_protocols_enabled(dev, RC_BIT_SANYO))
- return 0;
-
- if (!is_timing_event(ev)) {
---- a/drivers/media/rc/ir-sony-decoder.c
-+++ b/drivers/media/rc/ir-sony-decoder.c
-@@ -45,8 +45,8 @@ static int ir_sony_decode(struct rc_dev
- u32 scancode;
- u8 device, subdevice, function;
-
-- if (!(dev->enabled_protocols &
-- (RC_BIT_SONY12 | RC_BIT_SONY15 | RC_BIT_SONY20)))
-+ if (!rc_protocols_enabled(dev, RC_BIT_SONY12 | RC_BIT_SONY15 |
-+ RC_BIT_SONY20))
- return 0;
-
- if (!is_timing_event(ev)) {
-@@ -124,7 +124,7 @@ static int ir_sony_decode(struct rc_dev
-
- switch (data->count) {
- case 12:
-- if (!(dev->enabled_protocols & RC_BIT_SONY12)) {
-+ if (!rc_protocols_enabled(dev, RC_BIT_SONY12)) {
- data->state = STATE_INACTIVE;
- return 0;
- }
-@@ -133,7 +133,7 @@ static int ir_sony_decode(struct rc_dev
- function = bitrev8((data->bits >> 4) & 0xFE);
- break;
- case 15:
-- if (!(dev->enabled_protocols & RC_BIT_SONY15)) {
-+ if (!rc_protocols_enabled(dev, RC_BIT_SONY15)) {
- data->state = STATE_INACTIVE;
- return 0;
- }
-@@ -142,7 +142,7 @@ static int ir_sony_decode(struct rc_dev
- function = bitrev8((data->bits >> 7) & 0xFE);
- break;
- case 20:
-- if (!(dev->enabled_protocols & RC_BIT_SONY20)) {
-+ if (!rc_protocols_enabled(dev, RC_BIT_SONY20)) {
- data->state = STATE_INACTIVE;
- return 0;
- }
---- a/drivers/media/rc/ite-cir.c
-+++ b/drivers/media/rc/ite-cir.c
-@@ -1563,7 +1563,7 @@ static int ite_probe(struct pnp_dev *pde
- /* set up ir-core props */
- rdev->priv = itdev;
- rdev->driver_type = RC_DRIVER_IR_RAW;
-- rdev->allowed_protos = RC_BIT_ALL;
-+ rc_set_allowed_protocols(rdev, RC_BIT_ALL);
- rdev->open = ite_open;
- rdev->close = ite_close;
- rdev->s_idle = ite_s_idle;
---- a/drivers/media/rc/mceusb.c
-+++ b/drivers/media/rc/mceusb.c
-@@ -1217,7 +1217,7 @@ static struct rc_dev *mceusb_init_rc_dev
- rc->dev.parent = dev;
- rc->priv = ir;
- rc->driver_type = RC_DRIVER_IR_RAW;
-- rc->allowed_protos = RC_BIT_ALL;
-+ rc_set_allowed_protocols(rc, RC_BIT_ALL);
- rc->timeout = MS_TO_NS(100);
- if (!ir->flags.no_tx) {
- rc->s_tx_mask = mceusb_set_tx_mask;
---- a/drivers/media/rc/nuvoton-cir.c
-+++ b/drivers/media/rc/nuvoton-cir.c
-@@ -1042,7 +1042,7 @@ static int nvt_probe(struct pnp_dev *pde
- /* Set up the rc device */
- rdev->priv = nvt;
- rdev->driver_type = RC_DRIVER_IR_RAW;
-- rdev->allowed_protos = RC_BIT_ALL;
-+ rc_set_allowed_protocols(rdev, RC_BIT_ALL);
- rdev->open = nvt_open;
- rdev->close = nvt_close;
- rdev->tx_ir = nvt_tx_ir;
---- a/drivers/media/rc/rc-loopback.c
-+++ b/drivers/media/rc/rc-loopback.c
-@@ -195,7 +195,7 @@ static int __init loop_init(void)
- rc->map_name = RC_MAP_EMPTY;
- rc->priv = &loopdev;
- rc->driver_type = RC_DRIVER_IR_RAW;
-- rc->allowed_protos = RC_BIT_ALL;
-+ rc_set_allowed_protocols(rc, RC_BIT_ALL);
- rc->timeout = 100 * 1000 * 1000; /* 100 ms */
- rc->min_timeout = 1;
- rc->max_timeout = UINT_MAX;
---- a/drivers/media/rc/rc-main.c
-+++ b/drivers/media/rc/rc-main.c
-@@ -633,6 +633,7 @@ EXPORT_SYMBOL_GPL(rc_repeat);
- static void ir_do_keydown(struct rc_dev *dev, int scancode,
- u32 keycode, u8 toggle)
- {
-+ struct rc_scancode_filter *filter;
- bool new_event = !dev->keypressed ||
- dev->last_scancode != scancode ||
- dev->last_toggle != toggle;
-@@ -640,6 +641,11 @@ static void ir_do_keydown(struct rc_dev
- if (new_event && dev->keypressed)
- ir_do_keyup(dev, false);
-
-+ /* Generic scancode filtering */
-+ filter = &dev->scancode_filters[RC_FILTER_NORMAL];
-+ if (filter->mask && ((scancode ^ filter->data) & filter->mask))
-+ return;
-+
- input_event(dev->input_dev, EV_MSC, MSC_SCAN, scancode);
-
- if (new_event && keycode != KEY_RESERVED) {
-@@ -795,13 +801,38 @@ static struct {
- };
-
- /**
-- * show_protocols() - shows the current IR protocol(s)
-+ * struct rc_filter_attribute - Device attribute relating to a filter type.
-+ * @attr: Device attribute.
-+ * @type: Filter type.
-+ * @mask: false for filter value, true for filter mask.
-+ */
-+struct rc_filter_attribute {
-+ struct device_attribute attr;
-+ enum rc_filter_type type;
-+ bool mask;
-+};
-+#define to_rc_filter_attr(a) container_of(a, struct rc_filter_attribute, attr)
-+
-+#define RC_PROTO_ATTR(_name, _mode, _show, _store, _type) \
-+ struct rc_filter_attribute dev_attr_##_name = { \
-+ .attr = __ATTR(_name, _mode, _show, _store), \
-+ .type = (_type), \
-+ }
-+#define RC_FILTER_ATTR(_name, _mode, _show, _store, _type, _mask) \
-+ struct rc_filter_attribute dev_attr_##_name = { \
-+ .attr = __ATTR(_name, _mode, _show, _store), \
-+ .type = (_type), \
-+ .mask = (_mask), \
-+ }
-+
-+/**
-+ * show_protocols() - shows the current/wakeup IR protocol(s)
- * @device: the device descriptor
- * @mattr: the device attribute struct (unused)
- * @buf: a pointer to the output buffer
- *
- * This routine is a callback routine for input read the IR protocol type(s).
-- * it is trigged by reading /sys/class/rc/rc?/protocols.
-+ * it is trigged by reading /sys/class/rc/rc?/[wakeup_]protocols.
- * It returns the protocol names of supported protocols.
- * Enabled protocols are printed in brackets.
- *
-@@ -812,6 +843,7 @@ static ssize_t show_protocols(struct dev
- struct device_attribute *mattr, char *buf)
- {
- struct rc_dev *dev = to_rc_dev(device);
-+ struct rc_filter_attribute *fattr = to_rc_filter_attr(mattr);
- u64 allowed, enabled;
- char *tmp = buf;
- int i;
-@@ -822,9 +854,10 @@ static ssize_t show_protocols(struct dev
-
- mutex_lock(&dev->lock);
-
-- enabled = dev->enabled_protocols;
-- if (dev->driver_type == RC_DRIVER_SCANCODE)
-- allowed = dev->allowed_protos;
-+ enabled = dev->enabled_protocols[fattr->type];
-+ if (dev->driver_type == RC_DRIVER_SCANCODE ||
-+ fattr->type == RC_FILTER_WAKEUP)
-+ allowed = dev->allowed_protocols[fattr->type];
- else if (dev->raw)
- allowed = ir_raw_get_allowed_protocols();
- else {
-@@ -856,14 +889,14 @@ static ssize_t show_protocols(struct dev
- }
-
- /**
-- * store_protocols() - changes the current IR protocol(s)
-+ * store_protocols() - changes the current/wakeup IR protocol(s)
- * @device: the device descriptor
- * @mattr: the device attribute struct (unused)
- * @buf: a pointer to the input buffer
- * @len: length of the input buffer
- *
- * This routine is for changing the IR protocol type.
-- * It is trigged by writing to /sys/class/rc/rc?/protocols.
-+ * It is trigged by writing to /sys/class/rc/rc?/[wakeup_]protocols.
- * Writing "+proto" will add a protocol to the list of enabled protocols.
- * Writing "-proto" will remove a protocol from the list of enabled protocols.
- * Writing "proto" will enable only "proto".
-@@ -880,12 +913,15 @@ static ssize_t store_protocols(struct de
- size_t len)
- {
- struct rc_dev *dev = to_rc_dev(device);
-+ struct rc_filter_attribute *fattr = to_rc_filter_attr(mattr);
- bool enable, disable;
- const char *tmp;
-- u64 type;
-+ u64 old_type, type;
- u64 mask;
- int rc, i, count = 0;
- ssize_t ret;
-+ int (*change_protocol)(struct rc_dev *dev, u64 *rc_type);
-+ struct rc_scancode_filter local_filter, *filter;
-
- /* Device is being removed */
- if (!dev)
-@@ -898,7 +934,8 @@ static ssize_t store_protocols(struct de
- ret = -EINVAL;
- goto out;
- }
-- type = dev->enabled_protocols;
-+ old_type = dev->enabled_protocols[fattr->type];
-+ type = old_type;
-
- while ((tmp = strsep((char **) &data, " \n")) != NULL) {
- if (!*tmp)
-@@ -946,8 +983,10 @@ static ssize_t store_protocols(struct de
- goto out;
- }
-
-- if (dev->change_protocol) {
-- rc = dev->change_protocol(dev, &type);
-+ change_protocol = (fattr->type == RC_FILTER_NORMAL)
-+ ? dev->change_protocol : dev->change_wakeup_protocol;
-+ if (change_protocol) {
-+ rc = change_protocol(dev, &type);
- if (rc < 0) {
- IR_dprintk(1, "Error setting protocols to 0x%llx\n",
- (long long)type);
-@@ -956,10 +995,40 @@ static ssize_t store_protocols(struct de
- }
- }
-
-- dev->enabled_protocols = type;
-+ dev->enabled_protocols[fattr->type] = type;
- IR_dprintk(1, "Current protocol(s): 0x%llx\n",
- (long long)type);
-
-+ /*
-+ * If the protocol is changed the filter needs updating.
-+ * Try setting the same filter with the new protocol (if any).
-+ * Fall back to clearing the filter.
-+ */
-+ filter = &dev->scancode_filters[fattr->type];
-+ if (old_type != type && filter->mask) {
-+ local_filter = *filter;
-+ if (!type) {
-+ /* no protocol => clear filter */
-+ ret = -1;
-+ } else if (!dev->s_filter) {
-+ /* generic filtering => accept any filter */
-+ ret = 0;
-+ } else {
-+ /* hardware filtering => try setting, otherwise clear */
-+ ret = dev->s_filter(dev, fattr->type, &local_filter);
-+ }
-+ if (ret < 0) {
-+ /* clear the filter */
-+ local_filter.data = 0;
-+ local_filter.mask = 0;
-+ if (dev->s_filter)
-+ dev->s_filter(dev, fattr->type, &local_filter);
-+ }
-+
-+ /* commit the new filter */
-+ *filter = local_filter;
-+ }
-+
- ret = len;
-
- out:
-@@ -967,6 +1036,115 @@ out:
- return ret;
- }
-
-+/**
-+ * show_filter() - shows the current scancode filter value or mask
-+ * @device: the device descriptor
-+ * @attr: the device attribute struct
-+ * @buf: a pointer to the output buffer
-+ *
-+ * This routine is a callback routine to read a scancode filter value or mask.
-+ * It is trigged by reading /sys/class/rc/rc?/[wakeup_]filter[_mask].
-+ * It prints the current scancode filter value or mask of the appropriate filter
-+ * type in hexadecimal into @buf and returns the size of the buffer.
-+ *
-+ * Bits of the filter value corresponding to set bits in the filter mask are
-+ * compared against input scancodes and non-matching scancodes are discarded.
-+ *
-+ * dev->lock is taken to guard against races between device registration,
-+ * store_filter and show_filter.
-+ */
-+static ssize_t show_filter(struct device *device,
-+ struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct rc_dev *dev = to_rc_dev(device);
-+ struct rc_filter_attribute *fattr = to_rc_filter_attr(attr);
-+ u32 val;
-+
-+ /* Device is being removed */
-+ if (!dev)
-+ return -EINVAL;
-+
-+ mutex_lock(&dev->lock);
-+ if (fattr->mask)
-+ val = dev->scancode_filters[fattr->type].mask;
-+ else
-+ val = dev->scancode_filters[fattr->type].data;
-+ mutex_unlock(&dev->lock);
-+
-+ return sprintf(buf, "%#x\n", val);
-+}
-+
-+/**
-+ * store_filter() - changes the scancode filter value
-+ * @device: the device descriptor
-+ * @attr: the device attribute struct
-+ * @buf: a pointer to the input buffer
-+ * @len: length of the input buffer
-+ *
-+ * This routine is for changing a scancode filter value or mask.
-+ * It is trigged by writing to /sys/class/rc/rc?/[wakeup_]filter[_mask].
-+ * Returns -EINVAL if an invalid filter value for the current protocol was
-+ * specified or if scancode filtering is not supported by the driver, otherwise
-+ * returns @len.
-+ *
-+ * Bits of the filter value corresponding to set bits in the filter mask are
-+ * compared against input scancodes and non-matching scancodes are discarded.
-+ *
-+ * dev->lock is taken to guard against races between device registration,
-+ * store_filter and show_filter.
-+ */
-+static ssize_t store_filter(struct device *device,
-+ struct device_attribute *attr,
-+ const char *buf,
-+ size_t count)
-+{
-+ struct rc_dev *dev = to_rc_dev(device);
-+ struct rc_filter_attribute *fattr = to_rc_filter_attr(attr);
-+ struct rc_scancode_filter local_filter, *filter;
-+ int ret;
-+ unsigned long val;
-+
-+ /* Device is being removed */
-+ if (!dev)
-+ return -EINVAL;
-+
-+ ret = kstrtoul(buf, 0, &val);
-+ if (ret < 0)
-+ return ret;
-+
-+ /* Scancode filter not supported (but still accept 0) */
-+ if (!dev->s_filter && fattr->type != RC_FILTER_NORMAL)
-+ return val ? -EINVAL : count;
-+
-+ mutex_lock(&dev->lock);
-+
-+ /* Tell the driver about the new filter */
-+ filter = &dev->scancode_filters[fattr->type];
-+ local_filter = *filter;
-+ if (fattr->mask)
-+ local_filter.mask = val;
-+ else
-+ local_filter.data = val;
-+ if (!dev->enabled_protocols[fattr->type] && local_filter.mask) {
-+ /* refuse to set a filter unless a protocol is enabled */
-+ ret = -EINVAL;
-+ goto unlock;
-+ }
-+ if (dev->s_filter) {
-+ ret = dev->s_filter(dev, fattr->type, &local_filter);
-+ if (ret < 0)
-+ goto unlock;
-+ }
-+
-+ /* Success, commit the new filter */
-+ *filter = local_filter;
-+
-+unlock:
-+ mutex_unlock(&dev->lock);
-+ return (ret < 0) ? ret : count;
-+}
-+
- static void rc_dev_release(struct device *device)
- {
- }
-@@ -996,11 +1174,26 @@ static int rc_dev_uevent(struct device *
- /*
- * Static device attribute struct with the sysfs attributes for IR's
- */
--static DEVICE_ATTR(protocols, S_IRUGO | S_IWUSR,
-- show_protocols, store_protocols);
-+static RC_PROTO_ATTR(protocols, S_IRUGO | S_IWUSR,
-+ show_protocols, store_protocols, RC_FILTER_NORMAL);
-+static RC_PROTO_ATTR(wakeup_protocols, S_IRUGO | S_IWUSR,
-+ show_protocols, store_protocols, RC_FILTER_WAKEUP);
-+static RC_FILTER_ATTR(filter, S_IRUGO|S_IWUSR,
-+ show_filter, store_filter, RC_FILTER_NORMAL, false);
-+static RC_FILTER_ATTR(filter_mask, S_IRUGO|S_IWUSR,
-+ show_filter, store_filter, RC_FILTER_NORMAL, true);
-+static RC_FILTER_ATTR(wakeup_filter, S_IRUGO|S_IWUSR,
-+ show_filter, store_filter, RC_FILTER_WAKEUP, false);
-+static RC_FILTER_ATTR(wakeup_filter_mask, S_IRUGO|S_IWUSR,
-+ show_filter, store_filter, RC_FILTER_WAKEUP, true);
-
- static struct attribute *rc_dev_attrs[] = {
-- &dev_attr_protocols.attr,
-+ &dev_attr_protocols.attr.attr,
-+ &dev_attr_wakeup_protocols.attr.attr,
-+ &dev_attr_filter.attr.attr,
-+ &dev_attr_filter_mask.attr.attr,
-+ &dev_attr_wakeup_filter.attr.attr,
-+ &dev_attr_wakeup_filter_mask.attr.attr,
- NULL,
- };
-
-@@ -1091,14 +1284,6 @@ int rc_register_device(struct rc_dev *de
- if (dev->close)
- dev->input_dev->close = ir_close;
-
-- /*
-- * Take the lock here, as the device sysfs node will appear
-- * when device_add() is called, which may trigger an ir-keytable udev
-- * rule, which will in turn call show_protocols and access
-- * dev->enabled_protocols before it has been initialized.
-- */
-- mutex_lock(&dev->lock);
--
- do {
- devno = find_first_zero_bit(ir_core_dev_number,
- IRRCV_NUM_DEVICES);
-@@ -1107,6 +1292,14 @@ int rc_register_device(struct rc_dev *de
- return -ENOMEM;
- } while (test_and_set_bit(devno, ir_core_dev_number));
-
-+ /*
-+ * Take the lock here, as the device sysfs node will appear
-+ * when device_add() is called, which may trigger an ir-keytable udev
-+ * rule, which will in turn call show_protocols and access
-+ * dev->enabled_protocols before it has been initialized.
-+ */
-+ mutex_lock(&dev->lock);
-+
- dev->devno = devno;
- dev_set_name(&dev->dev, "rc%ld", dev->devno);
- dev_set_drvdata(&dev->dev, dev);
-@@ -1172,7 +1365,7 @@ int rc_register_device(struct rc_dev *de
- rc = dev->change_protocol(dev, &rc_type);
- if (rc < 0)
- goto out_raw;
-- dev->enabled_protocols = rc_type;
-+ dev->enabled_protocols[RC_FILTER_NORMAL] = rc_type;
- }
-
- mutex_unlock(&dev->lock);
---- a/drivers/media/rc/redrat3.c
-+++ b/drivers/media/rc/redrat3.c
-@@ -922,7 +922,7 @@ static struct rc_dev *redrat3_init_rc_de
- rc->dev.parent = dev;
- rc->priv = rr3;
- rc->driver_type = RC_DRIVER_IR_RAW;
-- rc->allowed_protos = RC_BIT_ALL;
-+ rc_set_allowed_protocols(rc, RC_BIT_ALL);
- rc->timeout = US_TO_NS(2750);
- rc->tx_ir = redrat3_transmit_ir;
- rc->s_tx_carrier = redrat3_set_tx_carrier;
---- a/drivers/media/rc/st_rc.c
-+++ b/drivers/media/rc/st_rc.c
-@@ -287,7 +287,7 @@ static int st_rc_probe(struct platform_d
- st_rc_hardware_init(rc_dev);
-
- rdev->driver_type = RC_DRIVER_IR_RAW;
-- rdev->allowed_protos = RC_BIT_ALL;
-+ rc_set_allowed_protocols(rdev, RC_BIT_ALL);
- /* rx sampling rate is 10Mhz */
- rdev->rx_resolution = 100;
- rdev->timeout = US_TO_NS(MAX_SYMB_TIME);
---- a/drivers/media/rc/streamzap.c
-+++ b/drivers/media/rc/streamzap.c
-@@ -322,7 +322,7 @@ static struct rc_dev *streamzap_init_rc_
- rdev->dev.parent = dev;
- rdev->priv = sz;
- rdev->driver_type = RC_DRIVER_IR_RAW;
-- rdev->allowed_protos = RC_BIT_ALL;
-+ rc_set_allowed_protocols(rdev, RC_BIT_ALL);
- rdev->driver_name = DRIVER_NAME;
- rdev->map_name = RC_MAP_STREAMZAP;
-
---- a/drivers/media/rc/ttusbir.c
-+++ b/drivers/media/rc/ttusbir.c
-@@ -318,7 +318,7 @@ static int ttusbir_probe(struct usb_inte
- usb_to_input_id(tt->udev, &rc->input_id);
- rc->dev.parent = &intf->dev;
- rc->driver_type = RC_DRIVER_IR_RAW;
-- rc->allowed_protos = RC_BIT_ALL;
-+ rc_set_allowed_protocols(rc, RC_BIT_ALL);
- rc->priv = tt;
- rc->driver_name = DRIVER_NAME;
- rc->map_name = RC_MAP_TT_1500;
---- a/drivers/media/rc/winbond-cir.c
-+++ b/drivers/media/rc/winbond-cir.c
-@@ -1082,7 +1082,7 @@ wbcir_probe(struct pnp_dev *device, cons
- data->dev->dev.parent = &device->dev;
- data->dev->timeout = MS_TO_NS(100);
- data->dev->rx_resolution = US_TO_NS(2);
-- data->dev->allowed_protos = RC_BIT_ALL;
-+ rc_set_allowed_protocols(data->dev, RC_BIT_ALL);
-
- err = rc_register_device(data->dev);
- if (err)
---- a/drivers/media/usb/dvb-usb/dvb-usb-remote.c
-+++ b/drivers/media/usb/dvb-usb/dvb-usb-remote.c
-@@ -272,7 +272,7 @@ static int rc_core_dvb_usb_remote_init(s
- dev->driver_name = d->props.rc.core.module_name;
- dev->map_name = d->props.rc.core.rc_codes;
- dev->change_protocol = d->props.rc.core.change_protocol;
-- dev->allowed_protos = d->props.rc.core.allowed_protos;
-+ rc_set_allowed_protocols(dev, d->props.rc.core.allowed_protos);
- dev->driver_type = d->props.rc.core.driver_type;
- usb_to_input_id(d->udev, &dev->input_id);
- dev->input_name = "IR-receiver inside an USB DVB receiver";
---- a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c
-+++ b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c
-@@ -164,7 +164,7 @@ static int dvb_usbv2_remote_init(struct
- dev->driver_name = (char *) d->props->driver_name;
- dev->map_name = d->rc.map_name;
- dev->driver_type = d->rc.driver_type;
-- dev->allowed_protos = d->rc.allowed_protos;
-+ rc_set_allowed_protocols(dev, d->rc.allowed_protos);
- dev->change_protocol = d->rc.change_protocol;
- dev->priv = d;
-
---- a/drivers/media/usb/em28xx/em28xx-input.c
-+++ b/drivers/media/usb/em28xx/em28xx-input.c
-@@ -725,7 +725,7 @@ static int em28xx_ir_init(struct em28xx
- case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
- rc->map_name = RC_MAP_HAUPPAUGE;
- ir->get_key_i2c = em28xx_get_key_em_haup;
-- rc->allowed_protos = RC_BIT_RC5;
-+ rc_set_allowed_protocols(rc, RC_BIT_RC5);
- break;
- case EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE:
- rc->map_name = RC_MAP_WINFAST_USBII_DELUXE;
-@@ -741,7 +741,7 @@ static int em28xx_ir_init(struct em28xx
- switch (dev->chip_id) {
- case CHIP_ID_EM2860:
- case CHIP_ID_EM2883:
-- rc->allowed_protos = RC_BIT_RC5 | RC_BIT_NEC;
-+ rc_set_allowed_protocols(rc, RC_BIT_RC5 | RC_BIT_NEC);
- ir->get_key = default_polling_getkey;
- break;
- case CHIP_ID_EM2884:
-@@ -749,8 +749,8 @@ static int em28xx_ir_init(struct em28xx
- case CHIP_ID_EM28174:
- case CHIP_ID_EM28178:
- ir->get_key = em2874_polling_getkey;
-- rc->allowed_protos = RC_BIT_RC5 | RC_BIT_NEC |
-- RC_BIT_RC6_0;
-+ rc_set_allowed_protocols(rc, RC_BIT_RC5 | RC_BIT_NEC |
-+ RC_BIT_RC6_0);
- break;
- default:
- err = -ENODEV;
---- a/drivers/media/usb/tm6000/tm6000-input.c
-+++ b/drivers/media/usb/tm6000/tm6000-input.c
-@@ -422,7 +422,7 @@ int tm6000_ir_init(struct tm6000_core *d
- ir->rc = rc;
-
- /* input setup */
-- rc->allowed_protos = RC_BIT_RC5 | RC_BIT_NEC;
-+ rc_set_allowed_protocols(rc, RC_BIT_RC5 | RC_BIT_NEC);
- /* Neded, in order to support NEC remotes with 24 or 32 bits */
- rc->scanmask = 0xffff;
- rc->priv = ir;
---- a/include/media/rc-core.h
-+++ b/include/media/rc-core.h
-@@ -35,6 +35,29 @@ enum rc_driver_type {
- };
-
- /**
-+ * struct rc_scancode_filter - Filter scan codes.
-+ * @data: Scancode data to match.
-+ * @mask: Mask of bits of scancode to compare.
-+ */
-+struct rc_scancode_filter {
-+ u32 data;
-+ u32 mask;
-+};
-+
-+/**
-+ * enum rc_filter_type - Filter type constants.
-+ * @RC_FILTER_NORMAL: Filter for normal operation.
-+ * @RC_FILTER_WAKEUP: Filter for waking from suspend.
-+ * @RC_FILTER_MAX: Number of filter types.
-+ */
-+enum rc_filter_type {
-+ RC_FILTER_NORMAL = 0,
-+ RC_FILTER_WAKEUP,
-+
-+ RC_FILTER_MAX
-+};
-+
-+/**
- * struct rc_dev - represents a remote control device
- * @dev: driver model's view of this device
- * @input_name: name of the input child device
-@@ -50,8 +73,10 @@ enum rc_driver_type {
- * @input_dev: the input child device used to communicate events to userspace
- * @driver_type: specifies if protocol decoding is done in hardware or software
- * @idle: used to keep track of RX state
-- * @allowed_protos: bitmask with the supported RC_BIT_* protocols
-- * @enabled_protocols: bitmask with the enabled RC_BIT_* protocols
-+ * @allowed_protocols: bitmask with the supported RC_BIT_* protocols for each
-+ * filter type
-+ * @enabled_protocols: bitmask with the enabled RC_BIT_* protocols for each
-+ * filter type
- * @scanmask: some hardware decoders are not capable of providing the full
- * scancode to the application. As this is a hardware limit, we can't do
- * anything with it. Yet, as the same keycode table can be used with other
-@@ -70,7 +95,10 @@ enum rc_driver_type {
- * @max_timeout: maximum timeout supported by device
- * @rx_resolution : resolution (in ns) of input sampler
- * @tx_resolution: resolution (in ns) of output sampler
-+ * @scancode_filters: scancode filters (indexed by enum rc_filter_type)
- * @change_protocol: allow changing the protocol used on hardware decoders
-+ * @change_wakeup_protocol: allow changing the protocol used for wakeup
-+ * filtering
- * @open: callback to allow drivers to enable polling/irq when IR input device
- * is opened.
- * @close: callback to allow drivers to disable polling/irq when IR input device
-@@ -84,6 +112,7 @@ enum rc_driver_type {
- * device doesn't interrupt host until it sees IR pulses
- * @s_learning_mode: enable wide band receiver used for learning
- * @s_carrier_report: enable carrier reports
-+ * @s_filter: set the scancode filter of a given type
- */
- struct rc_dev {
- struct device dev;
-@@ -99,8 +128,8 @@ struct rc_dev {
- struct input_dev *input_dev;
- enum rc_driver_type driver_type;
- bool idle;
-- u64 allowed_protos;
-- u64 enabled_protocols;
-+ u64 allowed_protocols[RC_FILTER_MAX];
-+ u64 enabled_protocols[RC_FILTER_MAX];
- u32 users;
- u32 scanmask;
- void *priv;
-@@ -116,7 +145,9 @@ struct rc_dev {
- u32 max_timeout;
- u32 rx_resolution;
- u32 tx_resolution;
-+ struct rc_scancode_filter scancode_filters[RC_FILTER_MAX];
- int (*change_protocol)(struct rc_dev *dev, u64 *rc_type);
-+ int (*change_wakeup_protocol)(struct rc_dev *dev, u64 *rc_type);
- int (*open)(struct rc_dev *dev);
- void (*close)(struct rc_dev *dev);
- int (*s_tx_mask)(struct rc_dev *dev, u32 mask);
-@@ -127,10 +158,49 @@ struct rc_dev {
- void (*s_idle)(struct rc_dev *dev, bool enable);
- int (*s_learning_mode)(struct rc_dev *dev, int enable);
- int (*s_carrier_report) (struct rc_dev *dev, int enable);
-+ int (*s_filter)(struct rc_dev *dev,
-+ enum rc_filter_type type,
-+ struct rc_scancode_filter *filter);
- };
-
- #define to_rc_dev(d) container_of(d, struct rc_dev, dev)
-
-+static inline bool rc_protocols_allowed(struct rc_dev *rdev, u64 protos)
-+{
-+ return rdev->allowed_protocols[RC_FILTER_NORMAL] & protos;
-+}
-+
-+/* should be called prior to registration or with mutex held */
-+static inline void rc_set_allowed_protocols(struct rc_dev *rdev, u64 protos)
-+{
-+ rdev->allowed_protocols[RC_FILTER_NORMAL] = protos;
-+}
-+
-+static inline bool rc_protocols_enabled(struct rc_dev *rdev, u64 protos)
-+{
-+ return rdev->enabled_protocols[RC_FILTER_NORMAL] & protos;
-+}
-+
-+/* should be called prior to registration or with mutex held */
-+static inline void rc_set_enabled_protocols(struct rc_dev *rdev, u64 protos)
-+{
-+ rdev->enabled_protocols[RC_FILTER_NORMAL] = protos;
-+}
-+
-+/* should be called prior to registration or with mutex held */
-+static inline void rc_set_allowed_wakeup_protocols(struct rc_dev *rdev,
-+ u64 protos)
-+{
-+ rdev->allowed_protocols[RC_FILTER_WAKEUP] = protos;
-+}
-+
-+/* should be called prior to registration or with mutex held */
-+static inline void rc_set_enabled_wakeup_protocols(struct rc_dev *rdev,
-+ u64 protos)
-+{
-+ rdev->enabled_protocols[RC_FILTER_WAKEUP] = protos;
-+}
-+
- /*
- * From rc-main.c
- * Those functions can be used on any type of Remote Controller. They
diff --git a/target/linux/sunxi/patches-3.14/300-1-dt-sun7i-add-pcduino3.patch b/target/linux/sunxi/patches-3.14/300-1-dt-sun7i-add-pcduino3.patch
deleted file mode 100644
index 9b844262ab..0000000000
--- a/target/linux/sunxi/patches-3.14/300-1-dt-sun7i-add-pcduino3.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From c6c022c42e6b9115cbc36dce3f9100b90c2d2b06 Mon Sep 17 00:00:00 2001
-From: Zoltan HERPAI <wigyori@uid0.hu>
-Date: Tue, 20 May 2014 22:28:49 +0200
-Subject: [PATCH] ARM: sun7i: dt: Add board support for LinkSprite pcDuino V3
-
-The LinkSprite pcDuino V3 is an A20-based revision of the
-earlier pcDuinos. This series will add support for the board,
-along with some of its devices where the driver is accepted or
-soon-to-be-accepted into mainline.
-
-Changes since v2:
- - update MMC entry to comply with upstream
- - unify the 4 patches into one
-
-Changes since v1:
- - fix cosmetic issues
- - fix i2c entry
- - remove unnecessary input bindings include
- - add MMC support
-
-Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
----
- arch/arm/boot/dts/Makefile | 3 +-
- arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 119 +++++++++++++++++++++++++++++++
- 2 files changed, 121 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/sun7i-a20-pcduino3.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -292,7 +292,8 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
- sun6i-a31-colombus.dtb \
- sun7i-a20-cubieboard2.dtb \
- sun7i-a20-cubietruck.dtb \
-- sun7i-a20-olinuxino-micro.dtb
-+ sun7i-a20-olinuxino-micro.dtb \
-+ sun7i-a20-pcduino3.dtb
- dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
- tegra20-iris-512.dtb \
- tegra20-medcom-wide.dtb \
diff --git a/target/linux/sunxi/patches-3.14/300-2-dt-sun7i-add-pcduino3-dts.patch b/target/linux/sunxi/patches-3.14/300-2-dt-sun7i-add-pcduino3-dts.patch
deleted file mode 100644
index bb2b923d2f..0000000000
--- a/target/linux/sunxi/patches-3.14/300-2-dt-sun7i-add-pcduino3-dts.patch
+++ /dev/null
@@ -1,156 +0,0 @@
---- /dev/null
-+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
-@@ -0,0 +1,153 @@
-+/*
-+ * Copyright 2014 Zoltan HERPAI
-+ * Zoltan HERPAI <wigyori@uid0.hu>
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+/include/ "sun7i-a20.dtsi"
-+/include/ "sunxi-ahci-reg.dtsi"
-+/include/ "sun4i-a10-usb-vbus-reg.dtsi"
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+ model = "LinkSprite pcDuino V3";
-+ compatible = "linksprite,a20-pcduino", "allwinner,sun7i-a20";
-+
-+ aliases {
-+ spi0 = &spi1;
-+ spi1 = &spi2;
-+ };
-+
-+ soc@01c00000 {
-+ spi1: spi@01c06000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spi1_pins_a>;
-+ status = "okay";
-+ };
-+
-+ spi2: spi@01c17000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spi2_pins_a>;
-+ status = "okay";
-+ };
-+
-+ mmc0: mmc@01c0f000 {
-+ pinctrl-names = "default", "default";
-+ pinctrl-0 = <&mmc0_pins_a>;
-+ pinctrl-1 = <&mmc0_cd_pin_reference_design>;
-+ cd-gpios = <&pio 7 1 0>; /* PH1 */
-+ status = "okay";
-+ };
-+
-+ usbphy: phy@01c13400 {
-+ usb1_vbus-supply = <&reg_usb1_vbus>;
-+ usb2_vbus-supply = <&reg_usb2_vbus>;
-+ status = "okay";
-+ };
-+
-+ ehci0: usb@01c14000 {
-+ status = "okay";
-+ };
-+
-+ ohci0: usb@01c14400 {
-+ status = "okay";
-+ };
-+
-+ ahci: sata@01c18000 {
-+ target-supply = <&reg_ahci_5v>;
-+ status = "okay";
-+ };
-+
-+ ehci1: usb@01c1c000 {
-+ status = "okay";
-+ };
-+
-+ ohci1: usb@01c1c400 {
-+ status = "okay";
-+ };
-+
-+ pinctrl@01c20800 {
-+ led_pins_pcduino3: led_pins@0 {
-+ allwinner,pins = "PH2";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <1>;
-+ allwinner,pull = <0>;
-+ };
-+ };
-+
-+ lradc: lradc@01c22800 {
-+ allwinner,chan0-step = <200>;
-+ linux,chan0-keycodes = <KEY_VOLUMEUP KEY_VOLUMEDOWN
-+ KEY_MENU KEY_SEARCH KEY_HOME
-+ KEY_ESC KEY_ENTER>;
-+ status = "okay";
-+ };
-+
-+ uart0: serial@01c28000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins_a>;
-+ status = "okay";
-+ };
-+
-+ uart6: serial@01c29800 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart6_pins_a>;
-+ status = "okay";
-+ };
-+
-+ uart7: serial@01c29c00 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart7_pins_a>;
-+ status = "okay";
-+ };
-+
-+ i2c0: i2c@01c2ac00 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c0_pins_a>;
-+ status = "okay";
-+ };
-+
-+ i2c1: i2c@01c2b000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c1_pins_a>;
-+ status = "okay";
-+ };
-+
-+ i2c2: i2c@01c2b400 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c2_pins_a>;
-+ status = "okay";
-+ };
-+
-+ gmac: ethernet@01c50000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&gmac_pins_mii_a>;
-+ phy = <&phy1>;
-+ phy-mode = "mii";
-+ status = "okay";
-+
-+ phy1: ethernet-phy@1 {
-+ reg = <1>;
-+ };
-+ };
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&led_pins_pcduino3>;
-+
-+ green {
-+ label = "a20-pcduino:green:usr";
-+ gpios = <&pio 7 2 0>;
-+ default-state = "on";
-+ };
-+ };
-+};
diff --git a/target/linux/sunxi/patches-3.14/301-dt-sun7i-update-pcduino3.patch b/target/linux/sunxi/patches-3.14/301-dt-sun7i-update-pcduino3.patch
deleted file mode 100644
index 7dfc95a975..0000000000
--- a/target/linux/sunxi/patches-3.14/301-dt-sun7i-update-pcduino3.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
-@@ -12,8 +12,7 @@
-
- /dts-v1/;
- /include/ "sun7i-a20.dtsi"
--/include/ "sunxi-ahci-reg.dtsi"
--/include/ "sun4i-a10-usb-vbus-reg.dtsi"
-+/include/ "sunxi-common-regulators.dtsi"
- #include <dt-bindings/input/input.h>
-
- / {
diff --git a/target/linux/sunxi/patches-3.14/302-1-dt-sun7i-add-bananapi-Makefile.patch b/target/linux/sunxi/patches-3.14/302-1-dt-sun7i-add-bananapi-Makefile.patch
deleted file mode 100644
index 88fad31536..0000000000
--- a/target/linux/sunxi/patches-3.14/302-1-dt-sun7i-add-bananapi-Makefile.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -290,6 +290,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
- sun5i-a13-olinuxino.dtb \
- sun5i-a13-olinuxino-micro.dtb \
- sun6i-a31-colombus.dtb \
-+ sun7i-a20-bananapi.dtb \
- sun7i-a20-cubieboard2.dtb \
- sun7i-a20-cubietruck.dtb \
- sun7i-a20-olinuxino-micro.dtb \
diff --git a/target/linux/sunxi/patches-3.14/302-2-dt-sun7i-add-bananapi-dts.patch b/target/linux/sunxi/patches-3.14/302-2-dt-sun7i-add-bananapi-dts.patch
deleted file mode 100644
index aea9992410..0000000000
--- a/target/linux/sunxi/patches-3.14/302-2-dt-sun7i-add-bananapi-dts.patch
+++ /dev/null
@@ -1,163 +0,0 @@
---- /dev/null
-+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
-@@ -0,0 +1,160 @@
-+/*
-+ * Copyright 2014 Zoltan HERPAI
-+ * Zoltan HERPAI <wigyori@uid0.hu>
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+/include/ "sun7i-a20.dtsi"
-+/include/ "sunxi-ahci-reg.dtsi"
-+/include/ "sun4i-a10-usb-vbus-reg.dtsi"
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+ model = "Lemaker bananaPi";
-+ compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
-+
-+ aliases {
-+ spi0 = &spi1;
-+ spi1 = &spi2;
-+ };
-+
-+ soc@01c00000 {
-+ spi1: spi@01c06000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spi1_pins_a>;
-+ status = "okay";
-+ };
-+
-+ spi2: spi@01c17000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spi2_pins_a>;
-+ status = "okay";
-+ };
-+
-+ mmc0: mmc@01c0f000 {
-+ pinctrl-names = "default", "default";
-+ pinctrl-0 = <&mmc0_pins_a>;
-+ pinctrl-1 = <&mmc0_cd_pin_bananapi>;
-+ cd-gpios = <&pio 7 10 0>; /* PH10 */
-+ status = "okay";
-+ };
-+
-+ usbphy: phy@01c13400 {
-+ usb1_vbus-supply = <&reg_usb1_vbus>;
-+ usb2_vbus-supply = <&reg_usb2_vbus>;
-+ status = "okay";
-+ };
-+
-+ ehci0: usb@01c14000 {
-+ status = "okay";
-+ };
-+
-+ ohci0: usb@01c14400 {
-+ status = "okay";
-+ };
-+
-+ ahci: sata@01c18000 {
-+ target-supply = <&reg_ahci_5v>;
-+ status = "okay";
-+ };
-+
-+ ehci1: usb@01c1c000 {
-+ status = "okay";
-+ };
-+
-+ ohci1: usb@01c1c400 {
-+ status = "okay";
-+ };
-+
-+ pinctrl@01c20800 {
-+ led_pins_bananapi: led_pins@0 {
-+ allwinner,pins = "PH24";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
-+
-+ mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
-+ allwinner,pins = "PH10";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <1>;
-+ };
-+ };
-+
-+ lradc: lradc@01c22800 {
-+ allwinner,chan0-step = <200>;
-+ linux,chan0-keycodes = <KEY_VOLUMEUP KEY_VOLUMEDOWN
-+ KEY_MENU KEY_SEARCH KEY_HOME
-+ KEY_ESC KEY_ENTER>;
-+ status = "okay";
-+ };
-+
-+ uart0: serial@01c28000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins_a>;
-+ status = "okay";
-+ };
-+
-+ uart6: serial@01c29800 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart6_pins_a>;
-+ status = "okay";
-+ };
-+
-+ uart7: serial@01c29c00 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart7_pins_a>;
-+ status = "okay";
-+ };
-+
-+ i2c0: i2c@01c2ac00 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c0_pins_a>;
-+ status = "okay";
-+ };
-+
-+ i2c1: i2c@01c2b000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c1_pins_a>;
-+ status = "okay";
-+ };
-+
-+ i2c2: i2c@01c2b400 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c2_pins_a>;
-+ status = "okay";
-+ };
-+
-+ gmac: ethernet@01c50000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&gmac_pins_mii_a>;
-+ phy = <&phy1>;
-+ phy-mode = "mii";
-+ status = "okay";
-+
-+ phy1: ethernet-phy@1 {
-+ reg = <1>;
-+ };
-+ };
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&led_pins_bananapi>;
-+
-+ green {
-+ label = "bananapi:green:usr";
-+ gpios = <&pio 7 24 0>;
-+ linux,default-trigger = "heartbeat";
-+ };
-+ };
-+};
diff --git a/target/linux/sunxi/patches-3.14/303-dt-sun7i-update-bananapi.patch b/target/linux/sunxi/patches-3.14/303-dt-sun7i-update-bananapi.patch
deleted file mode 100644
index 60ea0ebe88..0000000000
--- a/target/linux/sunxi/patches-3.14/303-dt-sun7i-update-bananapi.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
-@@ -12,8 +12,7 @@
-
- /dts-v1/;
- /include/ "sun7i-a20.dtsi"
--/include/ "sunxi-ahci-reg.dtsi"
--/include/ "sun4i-a10-usb-vbus-reg.dtsi"
-+/include/ "sunxi-common-regulators.dtsi"
- #include <dt-bindings/input/input.h>
-
- / {
diff --git a/target/linux/sunxi/patches-3.14/304-dt-sun7i-update-pcduino3-add-regulators.patch b/target/linux/sunxi/patches-3.14/304-dt-sun7i-update-pcduino3-add-regulators.patch
deleted file mode 100644
index 619deaa644..0000000000
--- a/target/linux/sunxi/patches-3.14/304-dt-sun7i-update-pcduino3-add-regulators.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
-@@ -149,4 +149,17 @@
- default-state = "on";
- };
- };
-+
-+ reg_ahci_5v: ahci-5v {
-+ status = "okay";
-+ };
-+
-+ reg_usb1_vbus: usb1-vbus {
-+ status = "okay";
-+ };
-+
-+ reg_usb2_vbus: usb2-vbus {
-+ status = "okay";
-+ };
-+
- };
diff --git a/target/linux/sunxi/patches-3.14/305-dt-sun7i-update-bananapi-add-regulators.patch b/target/linux/sunxi/patches-3.14/305-dt-sun7i-update-bananapi-add-regulators.patch
deleted file mode 100644
index 8eced4939a..0000000000
--- a/target/linux/sunxi/patches-3.14/305-dt-sun7i-update-bananapi-add-regulators.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
-@@ -156,4 +156,17 @@
- default-state = "on";
- };
- };
-+
-+ reg_ahci_5v: ahci-5v {
-+ status = "okay";
-+ };
-+
-+ reg_usb1_vbus: usb1-vbus {
-+ status = "okay";
-+ };
-+
-+ reg_usb2_vbus: usb2-vbus {
-+ status = "okay";
-+ };
-+
- };
diff --git a/target/linux/sunxi/patches-3.14/306-dt-sun7i-fix-gmac-on-bananapi.patch b/target/linux/sunxi/patches-3.14/306-dt-sun7i-fix-gmac-on-bananapi.patch
deleted file mode 100644
index 19934eacbe..0000000000
--- a/target/linux/sunxi/patches-3.14/306-dt-sun7i-fix-gmac-on-bananapi.patch
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
-@@ -86,6 +86,13 @@
- allwinner,drive = <0>;
- allwinner,pull = <1>;
- };
-+
-+ gmac_power_pin_bananapi: gmac_power_pin@0 {
-+ allwinner,pins = "PH23";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
- };
-
- lradc: lradc@01c22800 {
-@@ -134,9 +141,10 @@
-
- gmac: ethernet@01c50000 {
- pinctrl-names = "default";
-- pinctrl-0 = <&gmac_pins_mii_a>;
-+ pinctrl-0 = <&gmac_pins_rgmii_a>;
- phy = <&phy1>;
-- phy-mode = "mii";
-+ phy-mode = "rgmii";
-+ phy-supply = <&reg_gmac_3v3>;
- status = "okay";
-
- phy1: ethernet-phy@1 {
-@@ -169,4 +177,16 @@
- status = "okay";
- };
-
-+ reg_gmac_3v3: gmac-3v3 {
-+ compatible = "regulator-fixed";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&gmac_power_pin_bananapi>;
-+ regulator-name = "gmac-3v3";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ startup-delay-us = <50000>;
-+ enable-active-high;
-+ gpio = <&pio 7 23 0>;
-+ status = "okay";
-+ };
- };
diff --git a/target/linux/sunxi/patches-3.14/307-dt-sun7i-add-axp209-to-bananapi.patch b/target/linux/sunxi/patches-3.14/307-dt-sun7i-add-axp209-to-bananapi.patch
deleted file mode 100644
index fd8bfa549b..0000000000
--- a/target/linux/sunxi/patches-3.14/307-dt-sun7i-add-axp209-to-bananapi.patch
+++ /dev/null
@@ -1,17 +0,0 @@
---- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
-@@ -125,6 +125,14 @@
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-+
-+ axp: axp20x@34 {
-+ reg = <0x34>;
-+ interrupt-parent = <&nmi_intc>;
-+ interrupts = <0 8>;
-+ axp,system-power-controller;
-+ /include/ "x-powers-axp209.dtsi"
-+ };
- };
-
- i2c1: i2c@01c2b000 {
diff --git a/target/linux/sunxi/patches-3.14/308-dt-sun7i-add-axp209-to-pcduino3.patch b/target/linux/sunxi/patches-3.14/308-dt-sun7i-add-axp209-to-pcduino3.patch
deleted file mode 100644
index e091bf07b9..0000000000
--- a/target/linux/sunxi/patches-3.14/308-dt-sun7i-add-axp209-to-pcduino3.patch
+++ /dev/null
@@ -1,17 +0,0 @@
---- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
-@@ -111,6 +111,14 @@
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-+
-+ axp: axp20x@34 {
-+ reg = <0x34>;
-+ interrupt-parent = <&nmi_intc>;
-+ interrupts = <0 8>;
-+ axp,system-power-controller;
-+ /include/ "x-powers-axp209.dtsi"
-+ };
- };
-
- i2c1: i2c@01c2b000 {
diff --git a/target/linux/sunxi/patches-3.14/309-dt-sun7i-add-ir-to-bananapi.patch b/target/linux/sunxi/patches-3.14/309-dt-sun7i-add-ir-to-bananapi.patch
deleted file mode 100644
index 209b5ea5b0..0000000000
--- a/target/linux/sunxi/patches-3.14/309-dt-sun7i-add-ir-to-bananapi.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 05cffcda932b0914d78a08891c13e61593a6ce02 Mon Sep 17 00:00:00 2001
-From: Alexander Bersenev <bay@hackerdom.ru>
-Date: Mon, 9 Jun 2014 00:08:13 +0600
-Subject: [PATCH] ARM: sunxi: Enable IR controller on cubieboard 2 and
- cubietruck in dts
-
-This patch enables two IR devices in dts:
-- One IR device physically found on Cubieboard 2
-- One IR device physically found on Cubietruck
-
-Signed-off-by: Alexander Bersenev <bay@hackerdom.ru>
-Signed-off-by: Alexsey Shestacov <wingrime@linux-sunxi.org>
----
- arch/arm/boot/dts/sun7i-a20-bananapi.dts | 6 ++++++
- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 6 ++++++
- 2 files changed, 12 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
-@@ -103,6 +103,12 @@
- status = "okay";
- };
-
-+ ir0: ir@01c21800 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&ir0_pins_a>;
-+ status = "okay";
-+ };
-+
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
diff --git a/target/linux/sunxi/patches-3.14/310-dt-sun7i-add-a20-olinuxino-lime.patch b/target/linux/sunxi/patches-3.14/310-dt-sun7i-add-a20-olinuxino-lime.patch
deleted file mode 100644
index 2406710575..0000000000
--- a/target/linux/sunxi/patches-3.14/310-dt-sun7i-add-a20-olinuxino-lime.patch
+++ /dev/null
@@ -1,159 +0,0 @@
-From a71b4438af8242f383906071205db95a8b8e7b6d Mon Sep 17 00:00:00 2001
-From: FUKAUMI Naoki <naobsd@gmail.com>
-Date: Wed, 20 Aug 2014 14:25:03 +0900
-Subject: ARM: sun7i: Add support for Olimex A20-OLinuXino-LIME
-
-This patch adds support for Olimex A20-OLinuXino-LIME board.
-
-Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -293,6 +293,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
- sun7i-a20-bananapi.dtb \
- sun7i-a20-cubieboard2.dtb \
- sun7i-a20-cubietruck.dtb \
-+ sun7i-a20-olinuxino-lime.dtb \
- sun7i-a20-olinuxino-micro.dtb \
- sun7i-a20-pcduino3.dtb
- dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
-@@ -0,0 +1,136 @@
-+/*
-+ * This is based on sun4i-a10-olinuxino-lime.dts
-+ *
-+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
-+ * Copyright (c) 2014 FUKAUMI Naoki <naobsd@gmail.com>
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+/include/ "sun7i-a20.dtsi"
-+/include/ "sunxi-common-regulators.dtsi"
-+
-+/ {
-+ model = "Olimex A20-OLinuXino-LIME";
-+ compatible = "olimex,a20-olinuxino-lime", "allwinner,sun7i-a20";
-+
-+ soc@01c00000 {
-+ mmc0: mmc@01c0f000 {
-+ pinctrl-names = "default", "default";
-+ pinctrl-0 = <&mmc0_pins_a>;
-+ pinctrl-1 = <&mmc0_cd_pin_reference_design>;
-+ cd-gpios = <&pio 7 1 0>; /* PH1 */
-+ cd-mode = <1>;
-+ status = "okay";
-+ };
-+
-+ usbphy: phy@01c13400 {
-+ usb1_vbus-supply = <&reg_usb1_vbus>;
-+ usb2_vbus-supply = <&reg_usb2_vbus>;
-+ status = "okay";
-+ };
-+
-+ ehci0: usb@01c14000 {
-+ status = "okay";
-+ };
-+
-+ ohci0: usb@01c14400 {
-+ status = "okay";
-+ };
-+
-+ ahci: sata@01c18000 {
-+ target-supply = <&reg_ahci_5v>;
-+ status = "okay";
-+ };
-+
-+ ehci1: usb@01c1c000 {
-+ status = "okay";
-+ };
-+
-+ ohci1: usb@01c1c400 {
-+ status = "okay";
-+ };
-+
-+ pinctrl@01c20800 {
-+ ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
-+ allwinner,pins = "PC3";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
-+
-+ led_pins_olinuxinolime: led_pins@0 {
-+ allwinner,pins = "PH2";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <1>;
-+ allwinner,pull = <0>;
-+ };
-+ };
-+
-+ uart0: serial@01c28000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins_a>;
-+ status = "okay";
-+ };
-+
-+ i2c0: i2c@01c2ac00 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c0_pins_a>;
-+ status = "okay";
-+
-+ axp: axp20x@34 {
-+ reg = <0x34>;
-+ interrupt-parent = <&nmi_intc>;
-+ interrupts = <0 8>;
-+
-+ axp,system-power-controller;
-+
-+ /include/ "x-powers-axp209.dtsi"
-+ };
-+ };
-+
-+ gmac: ethernet@01c50000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&gmac_pins_mii_a>;
-+ phy = <&phy1>;
-+ phy-mode = "mii";
-+ status = "okay";
-+
-+ phy1: ethernet-phy@1 {
-+ reg = <1>;
-+ };
-+ };
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&led_pins_olinuxinolime>;
-+
-+ green {
-+ label = "a20-olinuxino-lime:green:usr";
-+ gpios = <&pio 7 2 0>;
-+ default-state = "on";
-+ };
-+ };
-+
-+ reg_ahci_5v: ahci-5v {
-+ pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
-+ gpio = <&pio 2 3 0>;
-+ status = "okay";
-+ };
-+
-+ reg_usb1_vbus: usb1-vbus {
-+ status = "okay";
-+ };
-+
-+ reg_usb2_vbus: usb2-vbus {
-+ status = "okay";
-+ };
-+};