diff options
Diffstat (limited to 'target/linux/sunxi/patches-5.10/101-sunxi-h5-add-support-for-nanopi-r1s-h5.patch')
-rw-r--r-- | target/linux/sunxi/patches-5.10/101-sunxi-h5-add-support-for-nanopi-r1s-h5.patch | 230 |
1 files changed, 0 insertions, 230 deletions
diff --git a/target/linux/sunxi/patches-5.10/101-sunxi-h5-add-support-for-nanopi-r1s-h5.patch b/target/linux/sunxi/patches-5.10/101-sunxi-h5-add-support-for-nanopi-r1s-h5.patch deleted file mode 100644 index e0c25bcb53..0000000000 --- a/target/linux/sunxi/patches-5.10/101-sunxi-h5-add-support-for-nanopi-r1s-h5.patch +++ /dev/null @@ -1,230 +0,0 @@ -From 9962cb9be2db877c232aaf00db40125c0d7bf4bc Mon Sep 17 00:00:00 2001 -From: Chukun Pan <amadeus@jmu.edu.cn> -Date: Mon, 17 May 2021 00:35:22 +0800 -Subject: [PATCH] arm64: dts: allwinner: h5: Add NanoPi R1S H5 support - -The NanoPi R1S H5 is a open source board made by FriendlyElec. -It has the following features: - -- Allwinner H5, Quad-core Cortex-A53 -- 512MB DDR3 RAM -- 10/100/1000M Ethernet x 2 -- RTL8189ETV WiFi 802.11b/g/n -- USB 2.0 host port (A) -- MicroSD Slot -- Serial Debug Port -- 5V 2A DC power-supply - -Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> -Signed-off-by: Maxime Ripard <maxime@cerno.tech> -Link: https://lore.kernel.org/r/20210516163523.9484-2-amadeus@jmu.edu.cn ---- - arch/arm64/boot/dts/allwinner/Makefile | 1 + - .../dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 195 ++++++++++++++++++ - 2 files changed, 196 insertions(+) - create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts - ---- a/arch/arm64/boot/dts/allwinner/Makefile -+++ b/arch/arm64/boot/dts/allwinner/Makefile -@@ -24,6 +24,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-li - dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h5-cc.dtb - dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb - dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb -+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-r1s-h5.dtb - dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb - dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb - dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb ---- /dev/null -+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts -@@ -0,0 +1,191 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -+/* -+ * Copyright (C) 2021 Chukun Pan <amadeus@jmu.edu.cn> -+ * -+ * Based on sun50i-h5-nanopi-neo-plus2.dts, which is: -+ * Copyright (C) 2017 Antony Antony <antony@phenome.org> -+ * Copyright (C) 2016 ARM Ltd. -+ */ -+ -+/dts-v1/; -+#include "sun50i-h5.dtsi" -+#include "sun50i-h5-cpu-opp.dtsi" -+ -+#include <dt-bindings/gpio/gpio.h> -+#include <dt-bindings/input/input.h> -+ -+/ { -+ model = "FriendlyARM NanoPi R1S H5"; -+ compatible = "friendlyarm,nanopi-r1s-h5", "allwinner,sun50i-h5"; -+ -+ aliases { -+ ethernet0 = &emac; -+ ethernet1 = &rtl8189etv; -+ serial0 = &uart0; -+ }; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ sys { -+ label = "nanopi:red:sys"; -+ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "heartbeat"; -+ }; -+ -+ lan { -+ label = "nanopi:green:lan"; -+ gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ wan { -+ label = "nanopi:green:wan"; -+ gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+ -+ r-gpio-keys { -+ compatible = "gpio-keys"; -+ -+ reset { -+ label = "reset"; -+ linux,code = <KEY_RESTART>; -+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ reg_gmac_3v3: gmac-3v3 { -+ compatible = "regulator-fixed"; -+ regulator-name = "gmac-3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ startup-delay-us = <100000>; -+ enable-active-high; -+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ reg_vcc3v3: vcc3v3 { -+ compatible = "regulator-fixed"; -+ regulator-name = "vcc3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ }; -+ -+ reg_usb0_vbus: usb0-vbus { -+ compatible = "regulator-fixed"; -+ regulator-name = "usb0-vbus"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ enable-active-high; -+ gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ -+ status = "okay"; -+ }; -+ -+ vdd_cpux: gpio-regulator { -+ compatible = "regulator-gpio"; -+ regulator-name = "vdd-cpux"; -+ regulator-type = "voltage"; -+ regulator-boot-on; -+ regulator-always-on; -+ regulator-min-microvolt = <1100000>; -+ regulator-max-microvolt = <1300000>; -+ regulator-ramp-delay = <50>; /* 4ms */ -+ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; -+ gpios-states = <0x1>; -+ states = <1100000 0x0>, <1300000 0x1>; -+ }; -+ -+ wifi_pwrseq: wifi_pwrseq { -+ compatible = "mmc-pwrseq-simple"; -+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ -+ post-power-on-delay-ms = <200>; -+ }; -+}; -+ -+&cpu0 { -+ cpu-supply = <&vdd_cpux>; -+}; -+ -+&ehci1 { -+ status = "okay"; -+}; -+ -+&ehci2 { -+ status = "okay"; -+}; -+ -+&emac { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&emac_rgmii_pins>; -+ phy-supply = <®_gmac_3v3>; -+ phy-handle = <&ext_rgmii_phy>; -+ phy-mode = "rgmii-id"; -+ status = "okay"; -+}; -+ -+&external_mdio { -+ ext_rgmii_phy: ethernet-phy@7 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <7>; -+ }; -+}; -+ -+&i2c0 { -+ status = "okay"; -+ -+ eeprom@51 { -+ compatible = "microchip,24c02"; -+ reg = <0x51>; -+ pagesize = <16>; -+ }; -+}; -+ -+&mmc0 { -+ vmmc-supply = <®_vcc3v3>; -+ bus-width = <4>; -+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ -+ status = "okay"; -+}; -+ -+&mmc1 { -+ vmmc-supply = <®_vcc3v3>; -+ vqmmc-supply = <®_vcc3v3>; -+ mmc-pwrseq = <&wifi_pwrseq>; -+ bus-width = <4>; -+ non-removable; -+ status = "okay"; -+ -+ rtl8189etv: sdio_wifi@1 { -+ reg = <1>; -+ }; -+}; -+ -+&ohci1 { -+ status = "okay"; -+}; -+ -+&ohci2 { -+ status = "okay"; -+}; -+ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pa_pins>; -+ status = "okay"; -+}; -+ -+&usb_otg { -+ dr_mode = "peripheral"; -+ status = "okay"; -+}; -+ -+&usbphy { -+ /* USB Type-A port's VBUS is always on */ -+ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ -+ usb0_vbus-supply = <®_usb0_vbus>; -+ status = "okay"; -+}; |