diff options
Diffstat (limited to 'target/linux/sunxi/patches-4.9/205-arm-dts-sun8i-add-support-for-nanopi-m1-plus-board.patch')
-rw-r--r-- | target/linux/sunxi/patches-4.9/205-arm-dts-sun8i-add-support-for-nanopi-m1-plus-board.patch | 168 |
1 files changed, 168 insertions, 0 deletions
diff --git a/target/linux/sunxi/patches-4.9/205-arm-dts-sun8i-add-support-for-nanopi-m1-plus-board.patch b/target/linux/sunxi/patches-4.9/205-arm-dts-sun8i-add-support-for-nanopi-m1-plus-board.patch new file mode 100644 index 0000000000..d0ee8edd14 --- /dev/null +++ b/target/linux/sunxi/patches-4.9/205-arm-dts-sun8i-add-support-for-nanopi-m1-plus-board.patch @@ -0,0 +1,168 @@ +From 2ed2388bc0c5b7d04c7b079d673ce61a0333c818 Mon Sep 17 00:00:00 2001 +From: Jagan Teki <jagan@amarulasolutions.com> +Date: Tue, 30 May 2017 17:42:50 +0000 +Subject: ARM: dts: sun8i: h3: Add initial NanoPi M1 Plus support + +Backported support from kernel 4.13 with the following changes: +- Added WiFi node +- Added Ethernet node +- Added eMMC node + +Original commit message: +NanoPi M1 Plus is designed and developed by FriendlyElec +for professionals, enterprise users, makers and hobbyists +using the Allwinner H3 SOC. + +NanoPi M1 Plus key features +- Allwinner H3, Quad-core Cortex-A7@1.2GHz +- 1GB DDR3 RAM +- 8GB eMMC +- microSD slot +- 10/100/1000M Ethernet +- Serial Debug Port +- 5V 2A DC power-supply + +Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> +Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -821,6 +821,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ + sun8i-a83t-cubietruck-plus.dtb \ + sun8i-h2-plus-orangepi-r1.dtb \ + sun8i-h3-bananapi-m2-plus.dtb \ ++ sun8i-h3-nanopi-m1-plus.dtb \ + sun8i-h3-nanopi-neo.dtb \ + sun8i-h3-orangepi-2.dtb \ + sun8i-h3-orangepi-lite.dtb \ +--- /dev/null ++++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts +@@ -0,0 +1,129 @@ ++/* ++ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com> ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This file is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This file is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++#include "sun8i-h3-nanopi.dtsi" ++ ++/ { ++ model = "FriendlyArm NanoPi M1 Plus"; ++ compatible = "friendlyarm,nanopi-m1-plus", "allwinner,sun8i-h3"; ++ ++ aliases { ++ ethernet0 = &emac; ++ }; ++ ++ pwrseq_wifi: pwrseq0 { ++ compatible = "mmc-pwrseq-simple"; ++ pinctrl-names = "default"; ++ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ ++ }; ++ ++ reg_gmac_3v3: gmac-3v3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "gmac-3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ startup-delay-us = <100000>; ++ enable-active-high; ++ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */ ++ }; ++}; ++ ++&ehci1 { ++ status = "okay"; ++}; ++ ++&ehci2 { ++ status = "okay"; ++}; ++ ++&emac { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&emac_rgmii_pins>; ++ phy-supply = <®_gmac_3v3>; ++ phy-handle = <&ext_rgmii_phy>; ++ phy-mode = "rgmii"; ++ status = "okay"; ++}; ++ ++&mdio { ++ ext_rgmii_phy: ethernet-phy@7 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <7>; ++ }; ++}; ++ ++&mmc1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc1_pins_a>; ++ vmmc-supply = <®_vcc3v3>; ++ vqmmc-supply = <®_vcc3v3>; ++ mmc-pwrseq = <&pwrseq_wifi>; ++ bus-width = <4>; ++ non-removable; ++ status = "okay"; ++ ++ brcmf: wifi@1 { ++ reg = <1>; ++ compatible = "brcm,bcm4329-fmac"; ++ interrupt-parent = <&pio>; ++ interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ ++ interrupt-names = "host-wake"; ++ }; ++}; ++ ++&mmc2 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc2_8bit_pins>; ++ vmmc-supply = <®_vcc3v3>; ++ vqmmc-supply = <®_vcc3v3>; ++ bus-width = <8>; ++ non-removable; ++ status = "okay"; ++}; ++ ++&ohci1 { ++ status = "okay"; ++}; ++ ++&ohci2 { ++ status = "okay"; ++}; |