aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/sunxi/patches-4.14/002-net-stmmac-dwmac-sun8i-Handle-integrated-external-MD.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/sunxi/patches-4.14/002-net-stmmac-dwmac-sun8i-Handle-integrated-external-MD.patch')
-rw-r--r--target/linux/sunxi/patches-4.14/002-net-stmmac-dwmac-sun8i-Handle-integrated-external-MD.patch506
1 files changed, 506 insertions, 0 deletions
diff --git a/target/linux/sunxi/patches-4.14/002-net-stmmac-dwmac-sun8i-Handle-integrated-external-MD.patch b/target/linux/sunxi/patches-4.14/002-net-stmmac-dwmac-sun8i-Handle-integrated-external-MD.patch
new file mode 100644
index 0000000000..8e0527f3d8
--- /dev/null
+++ b/target/linux/sunxi/patches-4.14/002-net-stmmac-dwmac-sun8i-Handle-integrated-external-MD.patch
@@ -0,0 +1,506 @@
+From 634db83b82658f4641d8026e340c6027cf74a6bb Mon Sep 17 00:00:00 2001
+From: Corentin Labbe <clabbe.montjoie@gmail.com>
+Date: Tue, 24 Oct 2017 19:57:13 +0200
+Subject: [PATCH] net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs
+
+The Allwinner H3 SoC have two distinct MDIO bus, only one could be
+active at the same time.
+The selection of the active MDIO bus are done via some bits in the EMAC
+register of the system controller.
+
+This patch implement this MDIO switch via a custom MDIO-mux.
+
+Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/ethernet/stmicro/stmmac/Kconfig | 1 +
+ drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 353 ++++++++++++++--------
+ 2 files changed, 224 insertions(+), 130 deletions(-)
+
+--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
++++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
+@@ -159,6 +159,7 @@ config DWMAC_SUN8I
+ tristate "Allwinner sun8i GMAC support"
+ default ARCH_SUNXI
+ depends on OF && (ARCH_SUNXI || COMPILE_TEST)
++ select MDIO_BUS_MUX
+ ---help---
+ Support for Allwinner H3 A83T A64 EMAC ethernet controllers.
+
+--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
++++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+@@ -17,6 +17,7 @@
+ #include <linux/clk.h>
+ #include <linux/io.h>
+ #include <linux/iopoll.h>
++#include <linux/mdio-mux.h>
+ #include <linux/mfd/syscon.h>
+ #include <linux/module.h>
+ #include <linux/of_device.h>
+@@ -41,14 +42,14 @@
+ * This value is used for disabling properly EMAC
+ * and used as a good starting value in case of the
+ * boot process(uboot) leave some stuff.
+- * @internal_phy: Does the MAC embed an internal PHY
++ * @soc_has_internal_phy: Does the MAC embed an internal PHY
+ * @support_mii: Does the MAC handle MII
+ * @support_rmii: Does the MAC handle RMII
+ * @support_rgmii: Does the MAC handle RGMII
+ */
+ struct emac_variant {
+ u32 default_syscon_value;
+- int internal_phy;
++ bool soc_has_internal_phy;
+ bool support_mii;
+ bool support_rmii;
+ bool support_rgmii;
+@@ -61,7 +62,8 @@ struct emac_variant {
+ * @rst_ephy: reference to the optional EPHY reset for the internal PHY
+ * @variant: reference to the current board variant
+ * @regmap: regmap for using the syscon
+- * @use_internal_phy: Does the current PHY choice imply using the internal PHY
++ * @internal_phy_powered: Does the internal PHY is enabled
++ * @mux_handle: Internal pointer used by mdio-mux lib
+ */
+ struct sunxi_priv_data {
+ struct clk *tx_clk;
+@@ -70,12 +72,13 @@ struct sunxi_priv_data {
+ struct reset_control *rst_ephy;
+ const struct emac_variant *variant;
+ struct regmap *regmap;
+- bool use_internal_phy;
++ bool internal_phy_powered;
++ void *mux_handle;
+ };
+
+ static const struct emac_variant emac_variant_h3 = {
+ .default_syscon_value = 0x58000,
+- .internal_phy = PHY_INTERFACE_MODE_MII,
++ .soc_has_internal_phy = true,
+ .support_mii = true,
+ .support_rmii = true,
+ .support_rgmii = true
+@@ -83,20 +86,20 @@ static const struct emac_variant emac_va
+
+ static const struct emac_variant emac_variant_v3s = {
+ .default_syscon_value = 0x38000,
+- .internal_phy = PHY_INTERFACE_MODE_MII,
++ .soc_has_internal_phy = true,
+ .support_mii = true
+ };
+
+ static const struct emac_variant emac_variant_a83t = {
+ .default_syscon_value = 0,
+- .internal_phy = 0,
++ .soc_has_internal_phy = false,
+ .support_mii = true,
+ .support_rgmii = true
+ };
+
+ static const struct emac_variant emac_variant_a64 = {
+ .default_syscon_value = 0,
+- .internal_phy = 0,
++ .soc_has_internal_phy = false,
+ .support_mii = true,
+ .support_rmii = true,
+ .support_rgmii = true
+@@ -195,6 +198,9 @@ static const struct emac_variant emac_va
+ #define H3_EPHY_LED_POL BIT(17) /* 1: active low, 0: active high */
+ #define H3_EPHY_SHUTDOWN BIT(16) /* 1: shutdown, 0: power up */
+ #define H3_EPHY_SELECT BIT(15) /* 1: internal PHY, 0: external PHY */
++#define H3_EPHY_MUX_MASK (H3_EPHY_SHUTDOWN | H3_EPHY_SELECT)
++#define DWMAC_SUN8I_MDIO_MUX_INTERNAL_ID 1
++#define DWMAC_SUN8I_MDIO_MUX_EXTERNAL_ID 2
+
+ /* H3/A64 specific bits */
+ #define SYSCON_RMII_EN BIT(13) /* 1: enable RMII (overrides EPIT) */
+@@ -634,6 +640,159 @@ static int sun8i_dwmac_reset(struct stmm
+ return 0;
+ }
+
++/* Search in mdio-mux node for internal PHY node and get its clk/reset */
++static int get_ephy_nodes(struct stmmac_priv *priv)
++{
++ struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
++ struct device_node *mdio_mux, *iphynode;
++ struct device_node *mdio_internal;
++ int ret;
++
++ mdio_mux = of_get_child_by_name(priv->device->of_node, "mdio-mux");
++ if (!mdio_mux) {
++ dev_err(priv->device, "Cannot get mdio-mux node\n");
++ return -ENODEV;
++ }
++
++ mdio_internal = of_find_compatible_node(mdio_mux, NULL,
++ "allwinner,sun8i-h3-mdio-internal");
++ if (!mdio_internal) {
++ dev_err(priv->device, "Cannot get internal_mdio node\n");
++ return -ENODEV;
++ }
++
++ /* Seek for internal PHY */
++ for_each_child_of_node(mdio_internal, iphynode) {
++ gmac->ephy_clk = of_clk_get(iphynode, 0);
++ if (IS_ERR(gmac->ephy_clk))
++ continue;
++ gmac->rst_ephy = of_reset_control_get_exclusive(iphynode, NULL);
++ if (IS_ERR(gmac->rst_ephy)) {
++ ret = PTR_ERR(gmac->rst_ephy);
++ if (ret == -EPROBE_DEFER)
++ return ret;
++ continue;
++ }
++ dev_info(priv->device, "Found internal PHY node\n");
++ return 0;
++ }
++ return -ENODEV;
++}
++
++static int sun8i_dwmac_power_internal_phy(struct stmmac_priv *priv)
++{
++ struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
++ int ret;
++
++ if (gmac->internal_phy_powered) {
++ dev_warn(priv->device, "Internal PHY already powered\n");
++ return 0;
++ }
++
++ dev_info(priv->device, "Powering internal PHY\n");
++ ret = clk_prepare_enable(gmac->ephy_clk);
++ if (ret) {
++ dev_err(priv->device, "Cannot enable internal PHY\n");
++ return ret;
++ }
++
++ /* Make sure the EPHY is properly reseted, as U-Boot may leave
++ * it at deasserted state, and thus it may fail to reset EMAC.
++ */
++ reset_control_assert(gmac->rst_ephy);
++
++ ret = reset_control_deassert(gmac->rst_ephy);
++ if (ret) {
++ dev_err(priv->device, "Cannot deassert internal phy\n");
++ clk_disable_unprepare(gmac->ephy_clk);
++ return ret;
++ }
++
++ gmac->internal_phy_powered = true;
++
++ return 0;
++}
++
++static int sun8i_dwmac_unpower_internal_phy(struct sunxi_priv_data *gmac)
++{
++ if (!gmac->internal_phy_powered)
++ return 0;
++
++ clk_disable_unprepare(gmac->ephy_clk);
++ reset_control_assert(gmac->rst_ephy);
++ gmac->internal_phy_powered = false;
++ return 0;
++}
++
++/* MDIO multiplexing switch function
++ * This function is called by the mdio-mux layer when it thinks the mdio bus
++ * multiplexer needs to switch.
++ * 'current_child' is the current value of the mux register
++ * 'desired_child' is the value of the 'reg' property of the target child MDIO
++ * node.
++ * The first time this function is called, current_child == -1.
++ * If current_child == desired_child, then the mux is already set to the
++ * correct bus.
++ */
++static int mdio_mux_syscon_switch_fn(int current_child, int desired_child,
++ void *data)
++{
++ struct stmmac_priv *priv = data;
++ struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
++ u32 reg, val;
++ int ret = 0;
++ bool need_power_ephy = false;
++
++ if (current_child ^ desired_child) {
++ regmap_read(gmac->regmap, SYSCON_EMAC_REG, &reg);
++ switch (desired_child) {
++ case DWMAC_SUN8I_MDIO_MUX_INTERNAL_ID:
++ dev_info(priv->device, "Switch mux to internal PHY");
++ val = (reg & ~H3_EPHY_MUX_MASK) | H3_EPHY_SELECT;
++
++ need_power_ephy = true;
++ break;
++ case DWMAC_SUN8I_MDIO_MUX_EXTERNAL_ID:
++ dev_info(priv->device, "Switch mux to external PHY");
++ val = (reg & ~H3_EPHY_MUX_MASK) | H3_EPHY_SHUTDOWN;
++ need_power_ephy = false;
++ break;
++ default:
++ dev_err(priv->device, "Invalid child ID %x\n",
++ desired_child);
++ return -EINVAL;
++ }
++ regmap_write(gmac->regmap, SYSCON_EMAC_REG, val);
++ if (need_power_ephy) {
++ ret = sun8i_dwmac_power_internal_phy(priv);
++ if (ret)
++ return ret;
++ } else {
++ sun8i_dwmac_unpower_internal_phy(gmac);
++ }
++ /* After changing syscon value, the MAC need reset or it will
++ * use the last value (and so the last PHY set).
++ */
++ ret = sun8i_dwmac_reset(priv);
++ }
++ return ret;
++}
++
++static int sun8i_dwmac_register_mdio_mux(struct stmmac_priv *priv)
++{
++ int ret;
++ struct device_node *mdio_mux;
++ struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
++
++ mdio_mux = of_get_child_by_name(priv->device->of_node, "mdio-mux");
++ if (!mdio_mux)
++ return -ENODEV;
++
++ ret = mdio_mux_init(priv->device, mdio_mux, mdio_mux_syscon_switch_fn,
++ &gmac->mux_handle, priv, priv->mii);
++ return ret;
++}
++
+ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
+ {
+ struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
+@@ -648,35 +807,25 @@ static int sun8i_dwmac_set_syscon(struct
+ "Current syscon value is not the default %x (expect %x)\n",
+ val, reg);
+
+- if (gmac->variant->internal_phy) {
+- if (!gmac->use_internal_phy) {
+- /* switch to external PHY interface */
+- reg &= ~H3_EPHY_SELECT;
+- } else {
+- reg |= H3_EPHY_SELECT;
+- reg &= ~H3_EPHY_SHUTDOWN;
+- dev_dbg(priv->device, "Select internal_phy %x\n", reg);
+-
+- if (of_property_read_bool(priv->plat->phy_node,
+- "allwinner,leds-active-low"))
+- reg |= H3_EPHY_LED_POL;
+- else
+- reg &= ~H3_EPHY_LED_POL;
+-
+- /* Force EPHY xtal frequency to 24MHz. */
+- reg |= H3_EPHY_CLK_SEL;
+-
+- ret = of_mdio_parse_addr(priv->device,
+- priv->plat->phy_node);
+- if (ret < 0) {
+- dev_err(priv->device, "Could not parse MDIO addr\n");
+- return ret;
+- }
+- /* of_mdio_parse_addr returns a valid (0 ~ 31) PHY
+- * address. No need to mask it again.
+- */
+- reg |= ret << H3_EPHY_ADDR_SHIFT;
++ if (gmac->variant->soc_has_internal_phy) {
++ if (of_property_read_bool(priv->plat->phy_node,
++ "allwinner,leds-active-low"))
++ reg |= H3_EPHY_LED_POL;
++ else
++ reg &= ~H3_EPHY_LED_POL;
++
++ /* Force EPHY xtal frequency to 24MHz. */
++ reg |= H3_EPHY_CLK_SEL;
++
++ ret = of_mdio_parse_addr(priv->device, priv->plat->phy_node);
++ if (ret < 0) {
++ dev_err(priv->device, "Could not parse MDIO addr\n");
++ return ret;
+ }
++ /* of_mdio_parse_addr returns a valid (0 ~ 31) PHY
++ * address. No need to mask it again.
++ */
++ reg |= 1 << H3_EPHY_ADDR_SHIFT;
+ }
+
+ if (!of_property_read_u32(node, "allwinner,tx-delay-ps", &val)) {
+@@ -746,81 +895,21 @@ static void sun8i_dwmac_unset_syscon(str
+ regmap_write(gmac->regmap, SYSCON_EMAC_REG, reg);
+ }
+
+-static int sun8i_dwmac_power_internal_phy(struct stmmac_priv *priv)
++static void sun8i_dwmac_exit(struct platform_device *pdev, void *priv)
+ {
+- struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
+- int ret;
+-
+- if (!gmac->use_internal_phy)
+- return 0;
++ struct sunxi_priv_data *gmac = priv;
+
+- ret = clk_prepare_enable(gmac->ephy_clk);
+- if (ret) {
+- dev_err(priv->device, "Cannot enable ephy\n");
+- return ret;
++ if (gmac->variant->soc_has_internal_phy) {
++ /* sun8i_dwmac_exit could be called with mdiomux uninit */
++ if (gmac->mux_handle)
++ mdio_mux_uninit(gmac->mux_handle);
++ if (gmac->internal_phy_powered)
++ sun8i_dwmac_unpower_internal_phy(gmac);
+ }
+
+- /* Make sure the EPHY is properly reseted, as U-Boot may leave
+- * it at deasserted state, and thus it may fail to reset EMAC.
+- */
+- reset_control_assert(gmac->rst_ephy);
+-
+- ret = reset_control_deassert(gmac->rst_ephy);
+- if (ret) {
+- dev_err(priv->device, "Cannot deassert ephy\n");
+- clk_disable_unprepare(gmac->ephy_clk);
+- return ret;
+- }
+-
+- return 0;
+-}
+-
+-static int sun8i_dwmac_unpower_internal_phy(struct sunxi_priv_data *gmac)
+-{
+- if (!gmac->use_internal_phy)
+- return 0;
+-
+- clk_disable_unprepare(gmac->ephy_clk);
+- reset_control_assert(gmac->rst_ephy);
+- return 0;
+-}
+-
+-/* sun8i_power_phy() - Activate the PHY:
+- * In case of error, no need to call sun8i_unpower_phy(),
+- * it will be called anyway by sun8i_dwmac_exit()
+- */
+-static int sun8i_power_phy(struct stmmac_priv *priv)
+-{
+- int ret;
+-
+- ret = sun8i_dwmac_power_internal_phy(priv);
+- if (ret)
+- return ret;
+-
+- ret = sun8i_dwmac_set_syscon(priv);
+- if (ret)
+- return ret;
+-
+- /* After changing syscon value, the MAC need reset or it will use
+- * the last value (and so the last PHY set.
+- */
+- ret = sun8i_dwmac_reset(priv);
+- if (ret)
+- return ret;
+- return 0;
+-}
+-
+-static void sun8i_unpower_phy(struct sunxi_priv_data *gmac)
+-{
+ sun8i_dwmac_unset_syscon(gmac);
+- sun8i_dwmac_unpower_internal_phy(gmac);
+-}
+-
+-static void sun8i_dwmac_exit(struct platform_device *pdev, void *priv)
+-{
+- struct sunxi_priv_data *gmac = priv;
+
+- sun8i_unpower_phy(gmac);
++ reset_control_put(gmac->rst_ephy);
+
+ clk_disable_unprepare(gmac->tx_clk);
+
+@@ -849,7 +938,7 @@ static struct mac_device_info *sun8i_dwm
+ if (!mac)
+ return NULL;
+
+- ret = sun8i_power_phy(priv);
++ ret = sun8i_dwmac_set_syscon(priv);
+ if (ret)
+ return NULL;
+
+@@ -889,6 +978,8 @@ static int sun8i_dwmac_probe(struct plat
+ struct sunxi_priv_data *gmac;
+ struct device *dev = &pdev->dev;
+ int ret;
++ struct stmmac_priv *priv;
++ struct net_device *ndev;
+
+ ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+ if (ret)
+@@ -932,29 +1023,6 @@ static int sun8i_dwmac_probe(struct plat
+ }
+
+ plat_dat->interface = of_get_phy_mode(dev->of_node);
+- if (plat_dat->interface == gmac->variant->internal_phy) {
+- dev_info(&pdev->dev, "Will use internal PHY\n");
+- gmac->use_internal_phy = true;
+- gmac->ephy_clk = of_clk_get(plat_dat->phy_node, 0);
+- if (IS_ERR(gmac->ephy_clk)) {
+- ret = PTR_ERR(gmac->ephy_clk);
+- dev_err(&pdev->dev, "Cannot get EPHY clock: %d\n", ret);
+- return -EINVAL;
+- }
+-
+- gmac->rst_ephy = of_reset_control_get(plat_dat->phy_node, NULL);
+- if (IS_ERR(gmac->rst_ephy)) {
+- ret = PTR_ERR(gmac->rst_ephy);
+- if (ret == -EPROBE_DEFER)
+- return ret;
+- dev_err(&pdev->dev, "No EPHY reset control found %d\n",
+- ret);
+- return -EINVAL;
+- }
+- } else {
+- dev_info(&pdev->dev, "Will use external PHY\n");
+- gmac->use_internal_phy = false;
+- }
+
+ /* platform data specifying hardware features and callbacks.
+ * hardware features were copied from Allwinner drivers.
+@@ -973,9 +1041,34 @@ static int sun8i_dwmac_probe(struct plat
+
+ ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+ if (ret)
+- sun8i_dwmac_exit(pdev, plat_dat->bsp_priv);
++ goto dwmac_exit;
++
++ ndev = dev_get_drvdata(&pdev->dev);
++ priv = netdev_priv(ndev);
++ /* The mux must be registered after parent MDIO
++ * so after stmmac_dvr_probe()
++ */
++ if (gmac->variant->soc_has_internal_phy) {
++ ret = get_ephy_nodes(priv);
++ if (ret)
++ goto dwmac_exit;
++ ret = sun8i_dwmac_register_mdio_mux(priv);
++ if (ret) {
++ dev_err(&pdev->dev, "Failed to register mux\n");
++ goto dwmac_mux;
++ }
++ } else {
++ ret = sun8i_dwmac_reset(priv);
++ if (ret)
++ goto dwmac_exit;
++ }
+
+ return ret;
++dwmac_mux:
++ sun8i_dwmac_unset_syscon(gmac);
++dwmac_exit:
++ sun8i_dwmac_exit(pdev, plat_dat->bsp_priv);
++return ret;
+ }
+
+ static const struct of_device_id sun8i_dwmac_match[] = {
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-08 16:45:58 +0000