aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/sunxi/patches-4.1/170-musb-add-driver.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/sunxi/patches-4.1/170-musb-add-driver.patch')
-rw-r--r--target/linux/sunxi/patches-4.1/170-musb-add-driver.patch810
1 files changed, 0 insertions, 810 deletions
diff --git a/target/linux/sunxi/patches-4.1/170-musb-add-driver.patch b/target/linux/sunxi/patches-4.1/170-musb-add-driver.patch
deleted file mode 100644
index c90156d5ca..0000000000
--- a/target/linux/sunxi/patches-4.1/170-musb-add-driver.patch
+++ /dev/null
@@ -1,810 +0,0 @@
-From 744543c599c420bcddca08cd2e2713b82a008328 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Wed, 8 Jul 2015 16:41:38 +0200
-Subject: [PATCH] usb: musb: sunxi: Add support for the Allwinner sunxi musb
- controller
-
-This is based on initial code to get the Allwinner sunxi musb controller
-supported by Chen-Yu Tsai and Roman Byshko.
-
-This adds support for the Allwinner sunxi musb controller in both host only
-and otg mode. Peripheral only mode is not supported, as no boards use that.
-
-This has been tested on a cubietruck (A20 SoC) and an UTOO P66 tablet
-(A13 SoC) with a variety of devices in host mode and with the g_serial gadget
-driver in peripheral mode, plugging otg / host cables in/out a lot of times
-in all possible imaginable plug orders.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Felipe Balbi <balbi@ti.com>
----
- .../bindings/usb/allwinner,sun4i-a10-musb.txt | 27 +
- drivers/usb/musb/Kconfig | 13 +-
- drivers/usb/musb/Makefile | 1 +
- drivers/usb/musb/sunxi.c | 703 +++++++++++++++++++++
- 4 files changed, 743 insertions(+), 1 deletion(-)
- create mode 100644 Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt
- create mode 100644 drivers/usb/musb/sunxi.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt
-@@ -0,0 +1,27 @@
-+Allwinner sun4i A10 musb DRC/OTG controller
-+-------------------------------------------
-+
-+Required properties:
-+ - compatible : "allwinner,sun4i-a10-musb"
-+ - reg : mmio address range of the musb controller
-+ - clocks : clock specifier for the musb controller ahb gate clock
-+ - interrupts : interrupt to which the musb controller is connected
-+ - interrupt-names : must be "mc"
-+ - phys : phy specifier for the otg phy
-+ - phy-names : must be "usb"
-+ - dr_mode : Dual-Role mode must be "host" or "otg"
-+ - extcon : extcon specifier for the otg phy
-+
-+Example:
-+
-+ usb_otg: usb@01c13000 {
-+ compatible = "allwinner,sun4i-a10-musb";
-+ reg = <0x01c13000 0x0400>;
-+ clocks = <&ahb_gates 0>;
-+ interrupts = <38>;
-+ interrupt-names = "mc";
-+ phys = <&usbphy 0>;
-+ phy-names = "usb";
-+ extcon = <&usbphy 0>;
-+ status = "disabled";
-+ };
---- a/drivers/usb/musb/Kconfig
-+++ b/drivers/usb/musb/Kconfig
-@@ -5,7 +5,7 @@
-
- # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
- config USB_MUSB_HDRC
-- tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
-+ tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, AW, ...)'
- depends on (USB || USB_GADGET)
- help
- Say Y here if your system has a dual role high speed USB
-@@ -20,6 +20,8 @@ config USB_MUSB_HDRC
- Analog Devices parts using this IP include Blackfin BF54x,
- BF525 and BF527.
-
-+ Allwinner SoCs using this IP include A10, A13, A20, ...
-+
- If you do not know what this is, please say N.
-
- To compile this driver as a module, choose M here; the
-@@ -60,6 +62,15 @@ endchoice
-
- comment "Platform Glue Layer"
-
-+config USB_MUSB_SUNXI
-+ tristate "Allwinner (sunxi)"
-+ depends on ARCH_SUNXI
-+ depends on NOP_USB_XCEIV
-+ depends on PHY_SUN4I_USB
-+ depends on EXTCON
-+ depends on GENERIC_PHY
-+ select SUNXI_SRAM
-+
- config USB_MUSB_DAVINCI
- tristate "DaVinci"
- depends on ARCH_DAVINCI_DMx
---- a/drivers/usb/musb/Makefile
-+++ b/drivers/usb/musb/Makefile
-@@ -20,6 +20,7 @@ obj-$(CONFIG_USB_MUSB_DA8XX) += da8xx.
- obj-$(CONFIG_USB_MUSB_BLACKFIN) += blackfin.o
- obj-$(CONFIG_USB_MUSB_UX500) += ux500.o
- obj-$(CONFIG_USB_MUSB_JZ4740) += jz4740.o
-+obj-$(CONFIG_USB_MUSB_SUNXI) += sunxi.o
-
-
- obj-$(CONFIG_USB_MUSB_AM335X_CHILD) += musb_am335x.o
---- /dev/null
-+++ b/drivers/usb/musb/sunxi.c
-@@ -0,0 +1,703 @@
-+/*
-+ * Allwinner sun4i MUSB Glue Layer
-+ *
-+ * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com>
-+ *
-+ * Based on code from
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/extcon.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/phy/phy-sun4i-usb.h>
-+#include <linux/platform_device.h>
-+#include <linux/soc/sunxi/sunxi_sram.h>
-+#include <linux/usb/musb.h>
-+#include <linux/usb/of.h>
-+#include <linux/usb/usb_phy_generic.h>
-+#include <linux/workqueue.h>
-+#include "musb_core.h"
-+
-+/*
-+ * Register offsets, note sunxi musb has a different layout then most
-+ * musb implementations, we translate the layout in musb_readb & friends.
-+ */
-+#define SUNXI_MUSB_POWER 0x0040
-+#define SUNXI_MUSB_DEVCTL 0x0041
-+#define SUNXI_MUSB_INDEX 0x0042
-+#define SUNXI_MUSB_VEND0 0x0043
-+#define SUNXI_MUSB_INTRTX 0x0044
-+#define SUNXI_MUSB_INTRRX 0x0046
-+#define SUNXI_MUSB_INTRTXE 0x0048
-+#define SUNXI_MUSB_INTRRXE 0x004a
-+#define SUNXI_MUSB_INTRUSB 0x004c
-+#define SUNXI_MUSB_INTRUSBE 0x0050
-+#define SUNXI_MUSB_FRAME 0x0054
-+#define SUNXI_MUSB_TXFIFOSZ 0x0090
-+#define SUNXI_MUSB_TXFIFOADD 0x0092
-+#define SUNXI_MUSB_RXFIFOSZ 0x0094
-+#define SUNXI_MUSB_RXFIFOADD 0x0096
-+#define SUNXI_MUSB_FADDR 0x0098
-+#define SUNXI_MUSB_TXFUNCADDR 0x0098
-+#define SUNXI_MUSB_TXHUBADDR 0x009a
-+#define SUNXI_MUSB_TXHUBPORT 0x009b
-+#define SUNXI_MUSB_RXFUNCADDR 0x009c
-+#define SUNXI_MUSB_RXHUBADDR 0x009e
-+#define SUNXI_MUSB_RXHUBPORT 0x009f
-+#define SUNXI_MUSB_CONFIGDATA 0x00c0
-+
-+/* VEND0 bits */
-+#define SUNXI_MUSB_VEND0_PIO_MODE 0
-+
-+/* flags */
-+#define SUNXI_MUSB_FL_ENABLED 0
-+#define SUNXI_MUSB_FL_HOSTMODE 1
-+#define SUNXI_MUSB_FL_HOSTMODE_PEND 2
-+#define SUNXI_MUSB_FL_VBUS_ON 3
-+#define SUNXI_MUSB_FL_PHY_ON 4
-+
-+/* Our read/write methods need access and do not get passed in a musb ref :| */
-+static struct musb *sunxi_musb;
-+
-+struct sunxi_glue {
-+ struct device *dev;
-+ struct platform_device *musb;
-+ struct clk *clk;
-+ struct phy *phy;
-+ struct platform_device *usb_phy;
-+ struct usb_phy *xceiv;
-+ unsigned long flags;
-+ struct work_struct work;
-+ struct extcon_dev *extcon;
-+ struct notifier_block host_nb;
-+};
-+
-+/* phy_power_on / off may sleep, so we use a workqueue */
-+static void sunxi_musb_work(struct work_struct *work)
-+{
-+ struct sunxi_glue *glue = container_of(work, struct sunxi_glue, work);
-+ bool vbus_on, phy_on;
-+
-+ if (!test_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags))
-+ return;
-+
-+ if (test_and_clear_bit(SUNXI_MUSB_FL_HOSTMODE_PEND, &glue->flags)) {
-+ struct musb *musb = platform_get_drvdata(glue->musb);
-+ unsigned long flags;
-+ u8 devctl;
-+
-+ spin_lock_irqsave(&musb->lock, flags);
-+
-+ devctl = readb(musb->mregs + SUNXI_MUSB_DEVCTL);
-+ if (test_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags)) {
-+ set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
-+ musb->xceiv->otg->default_a = 1;
-+ musb->xceiv->otg->state = OTG_STATE_A_IDLE;
-+ MUSB_HST_MODE(musb);
-+ devctl |= MUSB_DEVCTL_SESSION;
-+ } else {
-+ clear_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
-+ musb->xceiv->otg->default_a = 0;
-+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
-+ MUSB_DEV_MODE(musb);
-+ devctl &= ~MUSB_DEVCTL_SESSION;
-+ }
-+ writeb(devctl, musb->mregs + SUNXI_MUSB_DEVCTL);
-+
-+ spin_unlock_irqrestore(&musb->lock, flags);
-+ }
-+
-+ vbus_on = test_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
-+ phy_on = test_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags);
-+
-+ if (phy_on != vbus_on) {
-+ if (vbus_on) {
-+ phy_power_on(glue->phy);
-+ set_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags);
-+ } else {
-+ phy_power_off(glue->phy);
-+ clear_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags);
-+ }
-+ }
-+}
-+
-+static void sunxi_musb_set_vbus(struct musb *musb, int is_on)
-+{
-+ struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
-+
-+ if (is_on)
-+ set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
-+ else
-+ clear_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
-+
-+ schedule_work(&glue->work);
-+}
-+
-+static void sunxi_musb_pre_root_reset_end(struct musb *musb)
-+{
-+ struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
-+
-+ sun4i_usb_phy_set_squelch_detect(glue->phy, false);
-+}
-+
-+static void sunxi_musb_post_root_reset_end(struct musb *musb)
-+{
-+ struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
-+
-+ sun4i_usb_phy_set_squelch_detect(glue->phy, true);
-+}
-+
-+static irqreturn_t sunxi_musb_interrupt(int irq, void *__hci)
-+{
-+ struct musb *musb = __hci;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&musb->lock, flags);
-+
-+ musb->int_usb = readb(musb->mregs + SUNXI_MUSB_INTRUSB);
-+ if (musb->int_usb)
-+ writeb(musb->int_usb, musb->mregs + SUNXI_MUSB_INTRUSB);
-+
-+ /*
-+ * sunxi musb often signals babble on low / full speed device
-+ * disconnect, without ever raising MUSB_INTR_DISCONNECT, since
-+ * normally babble never happens treat it as disconnect.
-+ */
-+ if ((musb->int_usb & MUSB_INTR_BABBLE) && is_host_active(musb)) {
-+ musb->int_usb &= ~MUSB_INTR_BABBLE;
-+ musb->int_usb |= MUSB_INTR_DISCONNECT;
-+ }
-+
-+ if ((musb->int_usb & MUSB_INTR_RESET) && !is_host_active(musb)) {
-+ /* ep0 FADDR must be 0 when (re)entering peripheral mode */
-+ musb_ep_select(musb->mregs, 0);
-+ musb_writeb(musb->mregs, MUSB_FADDR, 0);
-+ }
-+
-+ musb->int_tx = readw(musb->mregs + SUNXI_MUSB_INTRTX);
-+ if (musb->int_tx)
-+ writew(musb->int_tx, musb->mregs + SUNXI_MUSB_INTRTX);
-+
-+ musb->int_rx = readw(musb->mregs + SUNXI_MUSB_INTRRX);
-+ if (musb->int_rx)
-+ writew(musb->int_rx, musb->mregs + SUNXI_MUSB_INTRRX);
-+
-+ musb_interrupt(musb);
-+
-+ spin_unlock_irqrestore(&musb->lock, flags);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int sunxi_musb_host_notifier(struct notifier_block *nb,
-+ unsigned long event, void *ptr)
-+{
-+ struct sunxi_glue *glue = container_of(nb, struct sunxi_glue, host_nb);
-+
-+ if (event)
-+ set_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags);
-+ else
-+ clear_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags);
-+
-+ set_bit(SUNXI_MUSB_FL_HOSTMODE_PEND, &glue->flags);
-+ schedule_work(&glue->work);
-+
-+ return NOTIFY_DONE;
-+}
-+
-+static int sunxi_musb_init(struct musb *musb)
-+{
-+ struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
-+ int ret;
-+
-+ sunxi_musb = musb;
-+ musb->phy = glue->phy;
-+ musb->xceiv = glue->xceiv;
-+
-+ ret = sunxi_sram_claim(musb->controller->parent);
-+ if (ret)
-+ return ret;
-+
-+ ret = clk_prepare_enable(glue->clk);
-+ if (ret)
-+ goto error_sram_release;
-+
-+ writeb(SUNXI_MUSB_VEND0_PIO_MODE, musb->mregs + SUNXI_MUSB_VEND0);
-+
-+ /* Register notifier before calling phy_init() */
-+ if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) {
-+ ret = extcon_register_notifier(glue->extcon, EXTCON_USB_HOST,
-+ &glue->host_nb);
-+ if (ret)
-+ goto error_clk_disable;
-+ }
-+
-+ ret = phy_init(glue->phy);
-+ if (ret)
-+ goto error_unregister_notifier;
-+
-+ if (musb->port_mode == MUSB_PORT_MODE_HOST) {
-+ ret = phy_power_on(glue->phy);
-+ if (ret)
-+ goto error_phy_exit;
-+ set_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags);
-+ /* Stop musb work from turning vbus off again */
-+ set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags);
-+ }
-+
-+ musb->isr = sunxi_musb_interrupt;
-+
-+ /* Stop the musb-core from doing runtime pm (not supported on sunxi) */
-+ pm_runtime_get(musb->controller);
-+
-+ return 0;
-+
-+error_phy_exit:
-+ phy_exit(glue->phy);
-+error_unregister_notifier:
-+ if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
-+ extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST,
-+ &glue->host_nb);
-+error_clk_disable:
-+ clk_disable_unprepare(glue->clk);
-+error_sram_release:
-+ sunxi_sram_release(musb->controller->parent);
-+ return ret;
-+}
-+
-+static int sunxi_musb_exit(struct musb *musb)
-+{
-+ struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
-+
-+ pm_runtime_put(musb->controller);
-+
-+ cancel_work_sync(&glue->work);
-+ if (test_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags))
-+ phy_power_off(glue->phy);
-+
-+ phy_exit(glue->phy);
-+
-+ if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
-+ extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST,
-+ &glue->host_nb);
-+
-+ clk_disable_unprepare(glue->clk);
-+ sunxi_sram_release(musb->controller->parent);
-+
-+ return 0;
-+}
-+
-+static void sunxi_musb_enable(struct musb *musb)
-+{
-+ struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
-+
-+ /* musb_core does not call us in a balanced manner */
-+ if (test_and_set_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags))
-+ return;
-+
-+ schedule_work(&glue->work);
-+}
-+
-+static void sunxi_musb_disable(struct musb *musb)
-+{
-+ struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
-+
-+ clear_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags);
-+}
-+
-+/*
-+ * sunxi musb register layout
-+ * 0x00 - 0x17 fifo regs, 1 long per fifo
-+ * 0x40 - 0x57 generic control regs (power - frame)
-+ * 0x80 - 0x8f ep control regs (addressed through hw_ep->regs, indexed)
-+ * 0x90 - 0x97 fifo control regs (indexed)
-+ * 0x98 - 0x9f multipoint / busctl regs (indexed)
-+ * 0xc0 configdata reg
-+ */
-+
-+static u32 sunxi_musb_fifo_offset(u8 epnum)
-+{
-+ return (epnum * 4);
-+}
-+
-+static u32 sunxi_musb_ep_offset(u8 epnum, u16 offset)
-+{
-+ WARN_ONCE(offset != 0,
-+ "sunxi_musb_ep_offset called with non 0 offset\n");
-+
-+ return 0x80; /* indexed, so ignore epnum */
-+}
-+
-+static u32 sunxi_musb_busctl_offset(u8 epnum, u16 offset)
-+{
-+ return SUNXI_MUSB_TXFUNCADDR + offset;
-+}
-+
-+static u8 sunxi_musb_readb(const void __iomem *addr, unsigned offset)
-+{
-+ if (addr == sunxi_musb->mregs) {
-+ /* generic control or fifo control reg access */
-+ switch (offset) {
-+ case MUSB_FADDR:
-+ return readb(addr + SUNXI_MUSB_FADDR);
-+ case MUSB_POWER:
-+ return readb(addr + SUNXI_MUSB_POWER);
-+ case MUSB_INTRUSB:
-+ return readb(addr + SUNXI_MUSB_INTRUSB);
-+ case MUSB_INTRUSBE:
-+ return readb(addr + SUNXI_MUSB_INTRUSBE);
-+ case MUSB_INDEX:
-+ return readb(addr + SUNXI_MUSB_INDEX);
-+ case MUSB_TESTMODE:
-+ return 0; /* No testmode on sunxi */
-+ case MUSB_DEVCTL:
-+ return readb(addr + SUNXI_MUSB_DEVCTL);
-+ case MUSB_TXFIFOSZ:
-+ return readb(addr + SUNXI_MUSB_TXFIFOSZ);
-+ case MUSB_RXFIFOSZ:
-+ return readb(addr + SUNXI_MUSB_RXFIFOSZ);
-+ case MUSB_CONFIGDATA + 0x10: /* See musb_read_configdata() */
-+ return readb(addr + SUNXI_MUSB_CONFIGDATA);
-+ /* Offset for these is fixed by sunxi_musb_busctl_offset() */
-+ case SUNXI_MUSB_TXFUNCADDR:
-+ case SUNXI_MUSB_TXHUBADDR:
-+ case SUNXI_MUSB_TXHUBPORT:
-+ case SUNXI_MUSB_RXFUNCADDR:
-+ case SUNXI_MUSB_RXHUBADDR:
-+ case SUNXI_MUSB_RXHUBPORT:
-+ /* multipoint / busctl reg access */
-+ return readb(addr + offset);
-+ default:
-+ dev_err(sunxi_musb->controller->parent,
-+ "Error unknown readb offset %u\n", offset);
-+ return 0;
-+ }
-+ } else if (addr == (sunxi_musb->mregs + 0x80)) {
-+ /* ep control reg access */
-+ /* sunxi has a 2 byte hole before the txtype register */
-+ if (offset >= MUSB_TXTYPE)
-+ offset += 2;
-+ return readb(addr + offset);
-+ }
-+
-+ dev_err(sunxi_musb->controller->parent,
-+ "Error unknown readb at 0x%x bytes offset\n",
-+ (int)(addr - sunxi_musb->mregs));
-+ return 0;
-+}
-+
-+static void sunxi_musb_writeb(void __iomem *addr, unsigned offset, u8 data)
-+{
-+ if (addr == sunxi_musb->mregs) {
-+ /* generic control or fifo control reg access */
-+ switch (offset) {
-+ case MUSB_FADDR:
-+ return writeb(data, addr + SUNXI_MUSB_FADDR);
-+ case MUSB_POWER:
-+ return writeb(data, addr + SUNXI_MUSB_POWER);
-+ case MUSB_INTRUSB:
-+ return writeb(data, addr + SUNXI_MUSB_INTRUSB);
-+ case MUSB_INTRUSBE:
-+ return writeb(data, addr + SUNXI_MUSB_INTRUSBE);
-+ case MUSB_INDEX:
-+ return writeb(data, addr + SUNXI_MUSB_INDEX);
-+ case MUSB_TESTMODE:
-+ if (data)
-+ dev_warn(sunxi_musb->controller->parent,
-+ "sunxi-musb does not have testmode\n");
-+ return;
-+ case MUSB_DEVCTL:
-+ return writeb(data, addr + SUNXI_MUSB_DEVCTL);
-+ case MUSB_TXFIFOSZ:
-+ return writeb(data, addr + SUNXI_MUSB_TXFIFOSZ);
-+ case MUSB_RXFIFOSZ:
-+ return writeb(data, addr + SUNXI_MUSB_RXFIFOSZ);
-+ /* Offset for these is fixed by sunxi_musb_busctl_offset() */
-+ case SUNXI_MUSB_TXFUNCADDR:
-+ case SUNXI_MUSB_TXHUBADDR:
-+ case SUNXI_MUSB_TXHUBPORT:
-+ case SUNXI_MUSB_RXFUNCADDR:
-+ case SUNXI_MUSB_RXHUBADDR:
-+ case SUNXI_MUSB_RXHUBPORT:
-+ /* multipoint / busctl reg access */
-+ return writeb(data, addr + offset);
-+ default:
-+ dev_err(sunxi_musb->controller->parent,
-+ "Error unknown writeb offset %u\n", offset);
-+ return;
-+ }
-+ } else if (addr == (sunxi_musb->mregs + 0x80)) {
-+ /* ep control reg access */
-+ if (offset >= MUSB_TXTYPE)
-+ offset += 2;
-+ return writeb(data, addr + offset);
-+ }
-+
-+ dev_err(sunxi_musb->controller->parent,
-+ "Error unknown writeb at 0x%x bytes offset\n",
-+ (int)(addr - sunxi_musb->mregs));
-+}
-+
-+static u16 sunxi_musb_readw(const void __iomem *addr, unsigned offset)
-+{
-+ if (addr == sunxi_musb->mregs) {
-+ /* generic control or fifo control reg access */
-+ switch (offset) {
-+ case MUSB_INTRTX:
-+ return readw(addr + SUNXI_MUSB_INTRTX);
-+ case MUSB_INTRRX:
-+ return readw(addr + SUNXI_MUSB_INTRRX);
-+ case MUSB_INTRTXE:
-+ return readw(addr + SUNXI_MUSB_INTRTXE);
-+ case MUSB_INTRRXE:
-+ return readw(addr + SUNXI_MUSB_INTRRXE);
-+ case MUSB_FRAME:
-+ return readw(addr + SUNXI_MUSB_FRAME);
-+ case MUSB_TXFIFOADD:
-+ return readw(addr + SUNXI_MUSB_TXFIFOADD);
-+ case MUSB_RXFIFOADD:
-+ return readw(addr + SUNXI_MUSB_RXFIFOADD);
-+ case MUSB_HWVERS:
-+ return 0; /* sunxi musb version is not known */
-+ default:
-+ dev_err(sunxi_musb->controller->parent,
-+ "Error unknown readw offset %u\n", offset);
-+ return 0;
-+ }
-+ } else if (addr == (sunxi_musb->mregs + 0x80)) {
-+ /* ep control reg access */
-+ return readw(addr + offset);
-+ }
-+
-+ dev_err(sunxi_musb->controller->parent,
-+ "Error unknown readw at 0x%x bytes offset\n",
-+ (int)(addr - sunxi_musb->mregs));
-+ return 0;
-+}
-+
-+static void sunxi_musb_writew(void __iomem *addr, unsigned offset, u16 data)
-+{
-+ if (addr == sunxi_musb->mregs) {
-+ /* generic control or fifo control reg access */
-+ switch (offset) {
-+ case MUSB_INTRTX:
-+ return writew(data, addr + SUNXI_MUSB_INTRTX);
-+ case MUSB_INTRRX:
-+ return writew(data, addr + SUNXI_MUSB_INTRRX);
-+ case MUSB_INTRTXE:
-+ return writew(data, addr + SUNXI_MUSB_INTRTXE);
-+ case MUSB_INTRRXE:
-+ return writew(data, addr + SUNXI_MUSB_INTRRXE);
-+ case MUSB_FRAME:
-+ return writew(data, addr + SUNXI_MUSB_FRAME);
-+ case MUSB_TXFIFOADD:
-+ return writew(data, addr + SUNXI_MUSB_TXFIFOADD);
-+ case MUSB_RXFIFOADD:
-+ return writew(data, addr + SUNXI_MUSB_RXFIFOADD);
-+ default:
-+ dev_err(sunxi_musb->controller->parent,
-+ "Error unknown writew offset %u\n", offset);
-+ return;
-+ }
-+ } else if (addr == (sunxi_musb->mregs + 0x80)) {
-+ /* ep control reg access */
-+ return writew(data, addr + offset);
-+ }
-+
-+ dev_err(sunxi_musb->controller->parent,
-+ "Error unknown writew at 0x%x bytes offset\n",
-+ (int)(addr - sunxi_musb->mregs));
-+}
-+
-+static const struct musb_platform_ops sunxi_musb_ops = {
-+ .quirks = MUSB_INDEXED_EP,
-+ .init = sunxi_musb_init,
-+ .exit = sunxi_musb_exit,
-+ .enable = sunxi_musb_enable,
-+ .disable = sunxi_musb_disable,
-+ .fifo_offset = sunxi_musb_fifo_offset,
-+ .ep_offset = sunxi_musb_ep_offset,
-+ .busctl_offset = sunxi_musb_busctl_offset,
-+ .readb = sunxi_musb_readb,
-+ .writeb = sunxi_musb_writeb,
-+ .readw = sunxi_musb_readw,
-+ .writew = sunxi_musb_writew,
-+ .set_vbus = sunxi_musb_set_vbus,
-+ .pre_root_reset_end = sunxi_musb_pre_root_reset_end,
-+ .post_root_reset_end = sunxi_musb_post_root_reset_end,
-+};
-+
-+/* Allwinner OTG supports up to 5 endpoints */
-+#define SUNXI_MUSB_MAX_EP_NUM 6
-+#define SUNXI_MUSB_RAM_BITS 11
-+
-+static struct musb_fifo_cfg sunxi_musb_mode_cfg[] = {
-+ MUSB_EP_FIFO_SINGLE(1, FIFO_TX, 512),
-+ MUSB_EP_FIFO_SINGLE(1, FIFO_RX, 512),
-+ MUSB_EP_FIFO_SINGLE(2, FIFO_TX, 512),
-+ MUSB_EP_FIFO_SINGLE(2, FIFO_RX, 512),
-+ MUSB_EP_FIFO_SINGLE(3, FIFO_TX, 512),
-+ MUSB_EP_FIFO_SINGLE(3, FIFO_RX, 512),
-+ MUSB_EP_FIFO_SINGLE(4, FIFO_TX, 512),
-+ MUSB_EP_FIFO_SINGLE(4, FIFO_RX, 512),
-+ MUSB_EP_FIFO_SINGLE(5, FIFO_TX, 512),
-+ MUSB_EP_FIFO_SINGLE(5, FIFO_RX, 512),
-+};
-+
-+static struct musb_hdrc_config sunxi_musb_hdrc_config = {
-+ .fifo_cfg = sunxi_musb_mode_cfg,
-+ .fifo_cfg_size = ARRAY_SIZE(sunxi_musb_mode_cfg),
-+ .multipoint = true,
-+ .dyn_fifo = true,
-+ .soft_con = true,
-+ .num_eps = SUNXI_MUSB_MAX_EP_NUM,
-+ .ram_bits = SUNXI_MUSB_RAM_BITS,
-+ .dma = 0,
-+};
-+
-+static int sunxi_musb_probe(struct platform_device *pdev)
-+{
-+ struct musb_hdrc_platform_data pdata;
-+ struct platform_device_info pinfo;
-+ struct sunxi_glue *glue;
-+ struct device_node *np = pdev->dev.of_node;
-+ int ret;
-+
-+ if (!np) {
-+ dev_err(&pdev->dev, "Error no device tree node found\n");
-+ return -EINVAL;
-+ }
-+
-+ glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
-+ if (!glue)
-+ return -ENOMEM;
-+
-+ memset(&pdata, 0, sizeof(pdata));
-+ switch (of_usb_get_dr_mode(np)) {
-+#if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_HOST
-+ case USB_DR_MODE_HOST:
-+ pdata.mode = MUSB_PORT_MODE_HOST;
-+ break;
-+#endif
-+#ifdef CONFIG_USB_MUSB_DUAL_ROLE
-+ case USB_DR_MODE_OTG:
-+ glue->extcon = extcon_get_edev_by_phandle(&pdev->dev, 0);
-+ if (IS_ERR(glue->extcon)) {
-+ if (PTR_ERR(glue->extcon) == -EPROBE_DEFER)
-+ return -EPROBE_DEFER;
-+ dev_err(&pdev->dev, "Invalid or missing extcon\n");
-+ return PTR_ERR(glue->extcon);
-+ }
-+ pdata.mode = MUSB_PORT_MODE_DUAL_ROLE;
-+ break;
-+#endif
-+ default:
-+ dev_err(&pdev->dev, "Invalid or missing 'dr_mode' property\n");
-+ return -EINVAL;
-+ }
-+ pdata.platform_ops = &sunxi_musb_ops;
-+ pdata.config = &sunxi_musb_hdrc_config;
-+
-+ glue->dev = &pdev->dev;
-+ INIT_WORK(&glue->work, sunxi_musb_work);
-+ glue->host_nb.notifier_call = sunxi_musb_host_notifier;
-+
-+ glue->clk = devm_clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(glue->clk)) {
-+ dev_err(&pdev->dev, "Error getting clock: %ld\n",
-+ PTR_ERR(glue->clk));
-+ return PTR_ERR(glue->clk);
-+ }
-+
-+ glue->phy = devm_phy_get(&pdev->dev, "usb");
-+ if (IS_ERR(glue->phy)) {
-+ if (PTR_ERR(glue->phy) == -EPROBE_DEFER)
-+ return -EPROBE_DEFER;
-+ dev_err(&pdev->dev, "Error getting phy %ld\n",
-+ PTR_ERR(glue->phy));
-+ return PTR_ERR(glue->phy);
-+ }
-+
-+ glue->usb_phy = usb_phy_generic_register();
-+ if (IS_ERR(glue->usb_phy)) {
-+ dev_err(&pdev->dev, "Error registering usb-phy %ld\n",
-+ PTR_ERR(glue->usb_phy));
-+ return PTR_ERR(glue->usb_phy);
-+ }
-+
-+ glue->xceiv = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
-+ if (IS_ERR(glue->xceiv)) {
-+ ret = PTR_ERR(glue->xceiv);
-+ dev_err(&pdev->dev, "Error getting usb-phy %d\n", ret);
-+ goto err_unregister_usb_phy;
-+ }
-+
-+ platform_set_drvdata(pdev, glue);
-+
-+ memset(&pinfo, 0, sizeof(pinfo));
-+ pinfo.name = "musb-hdrc";
-+ pinfo.id = PLATFORM_DEVID_AUTO;
-+ pinfo.parent = &pdev->dev;
-+ pinfo.res = pdev->resource;
-+ pinfo.num_res = pdev->num_resources;
-+ pinfo.data = &pdata;
-+ pinfo.size_data = sizeof(pdata);
-+
-+ glue->musb = platform_device_register_full(&pinfo);
-+ if (IS_ERR(glue->musb)) {
-+ ret = PTR_ERR(glue->musb);
-+ dev_err(&pdev->dev, "Error registering musb dev: %d\n", ret);
-+ goto err_unregister_usb_phy;
-+ }
-+
-+ return 0;
-+
-+err_unregister_usb_phy:
-+ usb_phy_generic_unregister(glue->usb_phy);
-+ return ret;
-+}
-+
-+static int sunxi_musb_remove(struct platform_device *pdev)
-+{
-+ struct sunxi_glue *glue = platform_get_drvdata(pdev);
-+ struct platform_device *usb_phy = glue->usb_phy;
-+
-+ platform_device_unregister(glue->musb); /* Frees glue ! */
-+ usb_phy_generic_unregister(usb_phy);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id sunxi_musb_match[] = {
-+ { .compatible = "allwinner,sun4i-a10-musb", },
-+ {}
-+};
-+
-+static struct platform_driver sunxi_musb_driver = {
-+ .probe = sunxi_musb_probe,
-+ .remove = sunxi_musb_remove,
-+ .driver = {
-+ .name = "musb-sunxi",
-+ .of_match_table = sunxi_musb_match,
-+ },
-+};
-+module_platform_driver(sunxi_musb_driver);
-+
-+MODULE_DESCRIPTION("Allwinner sunxi MUSB Glue Layer");
-+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
-+MODULE_LICENSE("GPL v2");