aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/sunxi/patches-3.14/232-2-dt-sun7i-add-bluetooth-to-cubietruck.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/sunxi/patches-3.14/232-2-dt-sun7i-add-bluetooth-to-cubietruck.patch')
-rw-r--r--target/linux/sunxi/patches-3.14/232-2-dt-sun7i-add-bluetooth-to-cubietruck.patch73
1 files changed, 0 insertions, 73 deletions
diff --git a/target/linux/sunxi/patches-3.14/232-2-dt-sun7i-add-bluetooth-to-cubietruck.patch b/target/linux/sunxi/patches-3.14/232-2-dt-sun7i-add-bluetooth-to-cubietruck.patch
deleted file mode 100644
index ce1858c893..0000000000
--- a/target/linux/sunxi/patches-3.14/232-2-dt-sun7i-add-bluetooth-to-cubietruck.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 7ed66f828ad1ae46226ad7c1b56466d5ae6d67b9 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Thu, 26 Dec 2013 17:15:47 +0800
-Subject: [PATCH] ARM: dts: sun7i: add bluetooth module to CubieTruck DTS
-
-The CubieTruck has an AMPAK AP6210 WiFi+Bluetooth module. The
-Bluetooth part is a BCM20710 IC connected to UART2 in the A20
-SoC. The IC also takes a 32.768 KHz low power clock input, a power
-enable signal and a wake signal via GPIO.
-
-The Bluetooth module supports out-of-band interrupt signaling via
-GPIO, but this is not supported in this patch.
----
- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 36 ++++++++++++++++++++++++++++++
- 1 file changed, 36 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-@@ -135,6 +135,20 @@
- allwinner,drive = <0>;
- allwinner,pull = <0>;
- };
-+
-+ bt_pwr_pin: bt_pwr_pin@0 {
-+ allwinner,pins = "PH18";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
-+
-+ bt_wake_pin: bt_wake_pin@0 {
-+ allwinner,pins = "PH24";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <0>;
-+ allwinner,pull = <0>;
-+ };
- };
-
- i2c0: i2c@01c2ac00 {
-@@ -167,6 +181,12 @@
- };
- };
-
-+ uart2: serial@01c28800 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart2_pins_a>;
-+ status = "okay";
-+ };
-+
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
-@@ -236,4 +256,20 @@
- enable-active-high;
- gpio = <&pio 7 9 0>;
- };
-+
-+ rfkill-switches {
-+ compatible = "simple-bus";
-+ pinctrl-names = "default";
-+
-+ rfkill_bt {
-+ compatible = "rfkill-gpio";
-+ pinctrl-0 = <&bt_pwr_pin>, <&clk_out_a_pins_a>;
-+ rfkill-name = "bt";
-+ rfkill-type = <2>;
-+ bt_shutdown-gpios = <0>, <&pio 7 18 0>; /* PH18 */
-+ bt_reset-gpios = <&pio 7 24 0>; /* PH24 */
-+ clocks = <&clk_out_a>;
-+ clock-frequency = <32768>;
-+ };
-+ };
- };