aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/storm
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/storm')
-rw-r--r--target/linux/storm/Makefile23
-rw-r--r--target/linux/storm/config-default221
-rw-r--r--target/linux/storm/image/Makefile46
-rw-r--r--target/linux/storm/patches/001-arch.patch8864
-rw-r--r--target/linux/storm/patches/002-gmac.patch18615
-rw-r--r--target/linux/storm/patches/003-gmac_one_phy.patch11
-rw-r--r--target/linux/storm/patches/004-gmac_enable_napi.patch81
-rw-r--r--target/linux/storm/patches/005-gmac_napi_mask_intrs.patch248
-rw-r--r--target/linux/storm/patches/006-gmac_napi_tx.patch2094
-rw-r--r--target/linux/storm/patches/007-mtd.patch4948
-rw-r--r--target/linux/storm/patches/008-serial.patch2809
-rw-r--r--target/linux/storm/patches/009-watchdog.patch398
-rw-r--r--target/linux/storm/patches/1100-gpio.patch384
13 files changed, 0 insertions, 38742 deletions
diff --git a/target/linux/storm/Makefile b/target/linux/storm/Makefile
deleted file mode 100644
index 9c5f4adcf3..0000000000
--- a/target/linux/storm/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# Copyright (C) 2006-2008 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-ARCH:=arm
-BOARD:=storm
-BOARDNAME:=Storm SL3512
-FEATURES:=squashfs pci broken
-CFLAGS:=-Os -pipe -march=armv4 -mtune=arm9tdmi -funit-at-a-time
-
-LINUX_VERSION:=2.6.23.17
-
-include $(INCLUDE_DIR)/target.mk
-
-define Target/Description
- Build images for boards based on the Storm Semiconductor SL3512, eg. Wiligear WBD-111
-endef
-
-$(eval $(call BuildTarget))
diff --git a/target/linux/storm/config-default b/target/linux/storm/config-default
deleted file mode 100644
index 36f2519346..0000000000
--- a/target/linux/storm/config-default
+++ /dev/null
@@ -1,221 +0,0 @@
-# CONFIG_AEABI is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SL2312=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARM=y
-# CONFIG_ARPD is not set
-# CONFIG_ARTHUR is not set
-# CONFIG_ATM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BITREVERSE=y
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_BONDING is not set
-CONFIG_BOUNCE=y
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_CIFS is not set
-# CONFIG_CLS_U32_PERF is not set
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,19200 mem=32M"
-CONFIG_CPU_32=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-CONFIG_CPU_CACHE_FA=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FA=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-CONFIG_CPU_FA526=y
-CONFIG_CPU_FA_BTB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_TLB_FA=y
-# CONFIG_CRC_ITU_T is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_ERRORS is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_DEFAULT_NOOP=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_ELF_CORE=y
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_EPOLL is not set
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_FPE_NWFPE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_FUTEX is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_GEMINI_GPIO_DEV=y
-# CONFIG_GEMINI_IPI is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_HFS_FS is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_I2C is not set
-# CONFIG_IDE is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_IFB is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_IMQ is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IPSEC_NAT_TRAVERSAL is not set
-# CONFIG_IPV6 is not set
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ISDN is not set
-# CONFIG_ISO9660_FS is not set
-# CONFIG_JFFS2_RTIME is not set
-# CONFIG_JFFS2_SUMMARY is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_LLC2 is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_MSDOS_FS is not set
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-CONFIG_MTD_REDBOOT_PARTS=y
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_SERIAL is not set
-CONFIG_MTD_SL2312_CFI=y
-# CONFIG_MTD_SL2312_SERIAL_ATMEL is not set
-# CONFIG_MTD_SL2312_SERIAL_ST is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_NET_ACT_GACT is not set
-# CONFIG_NET_ACT_IPT is not set
-# CONFIG_NET_ACT_MIRRED is not set
-# CONFIG_NET_ACT_PEDIT is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_EMATCH is not set
-CONFIG_NET_GMAC=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_KEY is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_ESFQ is not set
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_INGRESS is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_RR is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SL2312 is not set
-CONFIG_NET_SL351X=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_NFSD is not set
-# CONFIG_NFS_FS is not set
-CONFIG_NF_CONNTRACK=y
-# CONFIG_NLS is not set
-# CONFIG_NO_IDLE_HZ is not set
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NVRAM is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_PACKET=m
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PCI=y
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_PCI_DEBUG is not set
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_SL2312=y
-CONFIG_SERIAL_SL2312_CONSOLE=y
-# CONFIG_SL2312_LPC is not set
-# CONFIG_SL2312_MPAGE is not set
-# CONFIG_SL2312_RECVFILE is not set
-# CONFIG_SL2312_SHARE_PIN is not set
-# CONFIG_SL2312_TSO is not set
-# CONFIG_SL2312_USB is not set
-CONFIG_SL3516_ASIC=y
-# CONFIG_SMC91X is not set
-# CONFIG_SOUND is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_STANDALONE is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_SYSVIPC is not set
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_UDF_FS is not set
-CONFIG_UID16=y
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_USER_NS is not set
-CONFIG_VECTORS_BASE=0xffff0000
-# CONFIG_VFAT_FS is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VLAN_8021Q=m
-# CONFIG_W1 is not set
-CONFIG_WATCHDOG_SL351X=y
-# CONFIG_WLAN_80211 is not set
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_XIP_KERNEL is not set
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
diff --git a/target/linux/storm/image/Makefile b/target/linux/storm/image/Makefile
deleted file mode 100644
index e94c463ec5..0000000000
--- a/target/linux/storm/image/Makefile
+++ /dev/null
@@ -1,46 +0,0 @@
-#
-# Copyright (C) 2007-2008 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-define Image/Prepare
- cp $(LINUX_DIR)/arch/arm/boot/zImage $(KDIR)/zImage
-endef
-
-define Image/BuildKernel
- cp $(KDIR)/zImage $(BIN_DIR)/openwrt-$(BOARD)-zImage
-#
-# XXX - FIXME
-#
-# BIN_DIR=$(BIN_DIR) $(TOPDIR)/scripts/arm-magic.sh
-endef
-
-define Image/Build/jffs2-64k
- dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-$(1).img bs=64k conv=sync
-endef
-
-define Image/Build/jffs2-128k
- dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-$(1).img bs=128k conv=sync
-endef
-
-define Image/Build/squashfs
- $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
-endef
-
-define Image/Build
- $(call Image/Build/$(1),$(1))
- dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-root.$(1) bs=128k conv=sync
-
- -$(STAGING_DIR_HOST)/bin/mkfwimage2 \
- -m GEOS -f 0x30000000 -z \
- -v WILI-S.WILIBOARD.v5.00.SL3512.OpenWrt.00000.000000.000000 \
- -o $(BIN_DIR)/openwrt-$(BOARD)-wbd-111-$(1).bin \
- -p Kernel:0x020000:0x100000:0:0:$(BIN_DIR)/openwrt-$(BOARD)-zImage \
- -p Ramdisk:0x120000:0x500000:0:0:$(BIN_DIR)/openwrt-$(BOARD)-root.$(1)
-endef
-
-$(eval $(call BuildImage))
diff --git a/target/linux/storm/patches/001-arch.patch b/target/linux/storm/patches/001-arch.patch
deleted file mode 100644
index 699b9ba6d7..0000000000
--- a/target/linux/storm/patches/001-arch.patch
+++ /dev/null
@@ -1,8864 +0,0 @@
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -220,6 +220,9 @@ config ARCH_EP93XX
- help
- This enables support for the Cirrus EP93xx series of CPUs.
-
-+config ARCH_SL2312
-+ bool "SL2312"
-+
- config ARCH_FOOTBRIDGE
- bool "FootBridge"
- select FOOTBRIDGE
-@@ -414,6 +417,8 @@ source "arch/arm/mach-ep93xx/Kconfig"
-
- source "arch/arm/mach-footbridge/Kconfig"
-
-+source "arch/arm/mach-sl2312/Kconfig"
-+
- source "arch/arm/mach-integrator/Kconfig"
-
- source "arch/arm/mach-iop32x/Kconfig"
-@@ -549,6 +554,16 @@ config PCI
- config PCI_SYSCALL
- def_bool PCI
-
-+config SL2312_LPC
-+ bool "LPC Host Support"
-+ depends on ARCH_SL2312
-+ help
-+
-+config SL2312_LPC_IT8712
-+ bool "IT8712 Support"
-+ depends on ARCH_SL2312 && SL2312_LPC
-+ help
-+
- # Select the host bridge type
- config PCI_HOST_VIA82C505
- bool
-@@ -988,6 +1003,10 @@ if ALIGNMENT_TRAP || !CPU_CP15_MMU
- source "drivers/mtd/Kconfig"
- endif
-
-+if ARCH_SL2312
-+source "drivers/telephony/Kconfig"
-+endif
-+
- source "drivers/parport/Kconfig"
-
- source "drivers/pnp/Kconfig"
-@@ -997,7 +1016,7 @@ source "drivers/block/Kconfig"
- if PCMCIA || ARCH_CLPS7500 || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX \
- || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
- || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
-- || ARCH_IXP23XX
-+ || ARCH_IXP23XX || ARCH_SL2312
- source "drivers/ide/Kconfig"
- endif
-
---- a/arch/arm/Makefile
-+++ b/arch/arm/Makefile
-@@ -72,6 +72,7 @@ tune-$(CONFIG_CPU_ARM920T) :=-mtune=arm9
- tune-$(CONFIG_CPU_ARM922T) :=-mtune=arm9tdmi
- tune-$(CONFIG_CPU_ARM925T) :=-mtune=arm9tdmi
- tune-$(CONFIG_CPU_ARM926T) :=-mtune=arm9tdmi
-+tune-$(CONFIG_CPU_FA52X) :=-mtune=arm9tdmi
- tune-$(CONFIG_CPU_SA110) :=-mtune=strongarm110
- tune-$(CONFIG_CPU_SA1100) :=-mtune=strongarm1100
- tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-@@ -111,6 +112,7 @@ endif
- machine-$(CONFIG_ARCH_PXA) := pxa
- machine-$(CONFIG_ARCH_L7200) := l7200
- machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
-+ machine-$(CONFIG_ARCH_SL2312) := sl2312
- textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
- machine-$(CONFIG_ARCH_CLPS711X) := clps711x
- machine-$(CONFIG_ARCH_IOP32X) := iop32x
---- a/arch/arm/boot/compressed/Makefile
-+++ b/arch/arm/boot/compressed/Makefile
-@@ -19,6 +19,10 @@ ifeq ($(CONFIG_ARCH_SHARK),y)
- OBJS += head-shark.o ofw-shark.o
- endif
-
-+ifeq ($(CONFIG_ARCH_SL2312),y)
-+OBJS += head-sl2312.o
-+endif
-+
- ifeq ($(CONFIG_ARCH_L7200),y)
- OBJS += head-l7200.o
- endif
---- /dev/null
-+++ b/arch/arm/boot/compressed/head-sl2312.S
-@@ -0,0 +1,6 @@
-+#include <asm/mach-types.h>
-+#include <asm/arch/sl2312.h>
-+
-+ .section ".start", "ax"
-+ mov r7, #MACH_TYPE_SL2312
-+
---- a/arch/arm/boot/compressed/head.S
-+++ b/arch/arm/boot/compressed/head.S
-@@ -57,6 +57,17 @@
- mov \rb, #0x50000000
- add \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT
- .endm
-+/*****************************************************
-+ * for Storlink SoC
-+ *****************************************************/
-+#elif defined(CONFIG_ARCH_SL2312)
-+ .macro loadsp, rb
-+ mov \rb, #0x16000000
-+ .endm
-+ .macro writeb, rb
-+ strb \rb, [r3, #0]
-+ .endm
-+/****************************************************/
- #else
- .macro loadsp, rb
- addruart \rb
-@@ -116,7 +127,28 @@ start:
- .rept 8
- mov r0, r0
- .endr
--
-+/*****************************************************************************
-+ * for Storlink Soc -- on chip UART
-+ *****************************************************************************/
-+#ifndef CONFIG_SERIAL_IT8712 // Jason test
-+@ mov r3, #0x22000000
-+ mov r3, #0x42000000
-+ mov r11, #0x80
-+ strb r11, [r3, #0xc]
-+ mov r11, #0x0
-+ strb r11, [r3, #0x4]
-+#ifndef CONFIG_SL3516_ASIC
-+ mov r11, #0x9C /*0x9c->19200 0x4E->38400 0x34->57600 */
-+#else
-+ mov r11, #0x9C /* 0x61 for 30MHz on GeminiA chip*/
-+#endif
-+ strb r11, [r3, #0x0]
-+ mov r11, #0x03
-+ strb r11, [r3, #0xc]
-+ mov r11, #0xFB
-+ strb r11, [r3, #0x18]
-+#endif
-+/*****************************************************************************/
- b 1f
- .word 0x016f2818 @ Magic numbers to help the loader
- .word start @ absolute load/run zImage address
-@@ -458,6 +490,39 @@ __armv7_mmu_cache_on:
- mcr p15, 0, r0, c7, c5, 4 @ ISB
- mov pc, r12
-
-+/*****************************************************************************
-+ * for Storlink Soc -- CPU cache
-+ *****************************************************************************/
-+__fa526_cache_on:
-+ mov r12, lr
-+ bl __setup_mmu
-+ mov r0, #0
-+ mcr p15, 0, r0, c7, c6, 0 @ Invalidate D cache
-+ mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache
-+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
-+ mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
-+ mcr p15, 0, r3, c2, c0, 0 @ load page table pointer
-+ mov r0, #-1
-+ mcr p15, 0, r0, c3, c0, 0 @ load domain access register
-+ mrc p15, 0, r0, c1, c0, 0
-+ mov r0, r0
-+ mov r0, r0
-+#ifndef CONFIG_CPU_DCACHE_DISABLE
-+ orr r0, r0, #0x0004 @ .... .... .... .1..
-+#endif
-+#ifndef CONFIG_CPU_ICACHE_DISABLE
-+ orr r0, r0, #0x1000 @ ...1 .... .... ....
-+#endif
-+
-+#ifndef DEBUG
-+ orr r0, r0, #0x0039 @ Write buffer, mmu
-+#endif
-+ mcr p15, 0, r0, c1, c0
-+ mov r0, r0
-+ mov r0, r0
-+ mov pc, r12
-+/********************************************************************************/
-+
- __arm6_mmu_cache_on:
- mov r12, lr
- bl __setup_mmu
-@@ -625,6 +690,16 @@ proc_types:
-
- @ These match on the architecture ID
-
-+/*****************************************************************************
-+ * for Storlink Soc -- CPU architecture ID
-+ *****************************************************************************/
-+ .word 0x66015261 @ FA526
-+ .word 0xff01fff1
-+ b __fa526_cache_on
-+ b __fa526_cache_off
-+ b __fa526_cache_flush
-+/*****************************************************************************/
-+
- .word 0x00020000 @ ARMv4T
- .word 0x000f0000
- b __armv4_mmu_cache_on
-@@ -712,6 +787,23 @@ __armv7_mmu_cache_off:
- mcr p15, 0, r0, c8, c7, 0 @ invalidate whole TLB
- mov pc, r12
-
-+/*****************************************************************************
-+ * for Storlink Soc -- CPU cache
-+ *****************************************************************************/
-+__fa526_cache_off:
-+ mrc p15, 0, r0, c1, c0
-+ bic r0, r0, #0x000d
-+ mov r1, #0
-+ mcr p15, 0, r1, c7, c14, 0 @ clean and invalidate D cache
-+ mcr p15, 0, r1, c7, c10, 4 @ drain WB
-+ mcr p15, 0, r0, c1, c0 @ turn MMU and cache off
-+ mov r0, #0
-+ mcr p15, 0, r0, c7, c5, 0 @ invalidate whole cache v4
-+ mcr p15, 0, r0, c8, c7, 0 @ invalidate whole TLB v4
-+ mov pc, lr
-+/*****************************************************************************/
-+
-+
- __arm6_mmu_cache_off:
- mov r0, #0x00000030 @ ARM6 control reg.
- b __armv3_mmu_cache_off
-@@ -759,6 +851,17 @@ __armv4_mpu_cache_flush:
- mcr p15, 0, ip, c7, c10, 4 @ drain WB
- mov pc, lr
-
-+/*****************************************************************************
-+ * for Storlink Soc -- CPU cache
-+ *****************************************************************************/
-+__fa526_cache_flush:
-+ mov r1, #0
-+ mcr p15, 0, r1, c7, c14, 0 @ clean and invalidate D cache
-+ mcr p15, 0, r1, c7, c5, 0 @ flush I cache
-+ mcr p15, 0, r1, c7, c10, 4 @ drain WB
-+ mov pc, lr
-+/*****************************************************************************/
-+
-
- __armv6_mmu_cache_flush:
- mov r1, #0
---- /dev/null
-+++ b/arch/arm/boot/compressed/it8712.h
-@@ -0,0 +1,25 @@
-+
-+#ifndef __IT8712_H__
-+#define __IT8712_H__
-+
-+#include "asm/arch/sl2312.h"
-+
-+#define IT8712_IO_BASE SL2312_LPC_IO_BASE
-+//#define IT8712_IO_BASE 0x27000000
-+// Device LDN
-+#define LDN_SERIAL1 0x01
-+#define LDN_SERIAL2 0x02
-+#define LDN_PARALLEL 0x03
-+#define LDN_KEYBOARD 0x05
-+#define LDN_MOUSE 0x06
-+#define LDN_GPIO 0x07
-+
-+#define IT8712_UART1_PORT 0x3F8
-+#define IT8712_UART2_PORT 0x2F8
-+
-+#define IT8712_GPIO_BASE 0x800 // 0x800-0x804 for GPIO set1-set5
-+
-+void LPCSetConfig(char LdnNumber, char Index, char data);
-+char LPCGetConfig(char LdnNumber, char Index);
-+
-+#endif
---- a/arch/arm/boot/compressed/misc.c
-+++ b/arch/arm/boot/compressed/misc.c
-@@ -30,7 +30,7 @@ static void putstr(const char *ptr);
- #include <asm/arch/uncompress.h>
-
- #ifdef CONFIG_DEBUG_ICEDCC
--
-+#include "it8712.h"
- #ifdef CONFIG_CPU_V6
-
- static void icedcc_putc(int ch)
-@@ -69,6 +69,7 @@ static void icedcc_putc(int ch)
- #define flush() do { } while (0)
- #endif
-
-+#if 0
- static void putstr(const char *ptr)
- {
- char c;
-@@ -81,11 +82,36 @@ static void putstr(const char *ptr)
-
- flush();
- }
-+#endif
-
- #endif
-
- #define __ptr_t void *
-
-+#ifdef CONFIG_SERIAL_IT8712
-+unsigned int it8712_uart_base;
-+#define UART_RX 0
-+#define UART_TX 0
-+#define UART_DLL 0
-+#define UART_TRG 0
-+#define UART_DLM 1
-+#define UART_IER 1
-+#define UART_FCTR 1
-+#define UART_IIR 2
-+#define UART_FCR 2
-+#define UART_EFR 2
-+#define UART_LCR 3
-+#define UART_MCR 4
-+#define UART_LSR 5
-+#define UART_MSR 6
-+#define UART_SCR 7
-+#define UART_EMSR 7
-+void LPCEnterMBPnP(void);
-+void LPCExitMBPnP(void);
-+int SearchIT8712(void);
-+int InitLPCInterface(void);
-+#endif
-+
- /*
- * Optimised C version of memzero for the ARM.
- */
-@@ -346,6 +372,9 @@ ulg
- decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p,
- int arch_id)
- {
-+#ifdef CONFIG_SERIAL_IT8712
-+ unsigned char *addr;
-+#endif
- output_data = (uch *)output_start; /* Points to kernel start */
- free_mem_ptr = free_mem_ptr_p;
- free_mem_ptr_end = free_mem_ptr_end_p;
-@@ -353,6 +382,33 @@ decompress_kernel(ulg output_start, ulg
-
- arch_decomp_setup();
-
-+#ifdef CONFIG_SERIAL_IT8712
-+
-+ InitLPCInterface();
-+ LPCSetConfig(0, 0x02, 0x01);
-+ LPCSetConfig(LDN_SERIAL1, 0x30, 0x1);
-+ LPCSetConfig(LDN_SERIAL1, 0x23, 0x0);
-+ it8712_uart_base = IT8712_IO_BASE;
-+ it8712_uart_base += ((LPCGetConfig(LDN_SERIAL1, 0x60) << 8) + LPCGetConfig(LDN_SERIAL1, 0x61));
-+
-+ do {
-+ addr = (unsigned char *)(it8712_uart_base + UART_LCR) ;
-+ *addr = 0x80;
-+ // Set Baud Rate
-+ addr = (unsigned char *)(it8712_uart_base+UART_DLL);
-+ *addr = 0x06 ;
-+ addr = (unsigned char *)(it8712_uart_base+UART_DLM);
-+ *addr = 0x00 ;
-+
-+ addr = (unsigned char *)(it8712_uart_base+UART_LCR); // LCR
-+ *addr = 0x07 ;
-+ addr = (unsigned char *)(it8712_uart_base+UART_MCR); // MCR
-+ *addr = 0x08 ;
-+ addr = (unsigned char *)(it8712_uart_base+UART_FCR); // FCR
-+ *addr = 0x01 ;
-+ } while(0);
-+#endif
-+
- makecrc();
- putstr("Uncompressing Linux...");
- gunzip();
-@@ -374,4 +430,119 @@ int main()
- return 0;
- }
- #endif
-+
-+#ifdef CONFIG_SERIAL_IT8712
-+
-+#define LPC_KEY_ADDR (unsigned char *)(SL2312_LPC_IO_BASE + 0x2e)
-+#define LPC_DATA_ADDR (unsigned char *)(SL2312_LPC_IO_BASE + 0x2f)
-+#define LPC_BUS_CTRL *( unsigned char*) (SL2312_LPC_HOST_BASE + 0)
-+#define LPC_BUS_STATUS *( unsigned char*) (SL2312_LPC_HOST_BASE + 2)
-+#define LPC_SERIAL_IRQ_CTRL *( unsigned char*) (SL2312_LPC_HOST_BASE + 4)
-+
-+char LPCGetConfig(char LdnNumber, char Index)
-+{
-+ char rtn;
-+ unsigned char *addr ;
-+
-+ LPCEnterMBPnP(); // Enter IT8712 MB PnP mode
-+
-+ addr = LPC_KEY_ADDR;
-+ *addr = 0x07 ;
-+
-+ addr = LPC_DATA_ADDR;
-+ *addr = LdnNumber ;
-+
-+ addr = LPC_KEY_ADDR;
-+ *addr = Index ;
-+
-+ addr = LPC_DATA_ADDR ;
-+ rtn = *addr ;
-+
-+ LPCExitMBPnP();
-+ return rtn;
-+
-+}
-+
-+void LPCSetConfig(char LdnNumber, char Index, char data)
-+{
-+ unsigned char *addr;
-+ LPCEnterMBPnP(); // Enter IT8712 MB PnP mode
-+ addr = LPC_KEY_ADDR;
-+ *addr = 0x07;
-+ addr = LPC_DATA_ADDR;
-+ *addr = LdnNumber;
-+ addr = LPC_KEY_ADDR;
-+ *addr = Index;
-+ addr = LPC_DATA_ADDR;
-+ *addr = data;
-+
-+ LPCExitMBPnP();
-+}
-+
-+//unsigned char key[4] ;
-+void LPCEnterMBPnP(void)
-+{
-+ unsigned char *addr;
-+ addr = LPC_KEY_ADDR;
-+ unsigned char key[4] = {0x87, 0x01, 0x55, 0x55};
-+
-+ do {
-+ *addr = key[0];
-+ *addr = key[1];
-+ *addr = key[2];
-+ *addr = key[3];
-+ }while(0);
-+}
-+
-+void LPCExitMBPnP(void)
-+{
-+ unsigned char *addr;
-+ addr = LPC_KEY_ADDR;
-+ *addr = 0x02 ;
-+
-+ addr = LPC_DATA_ADDR;
-+ *addr = 0x02 ;
-+}
-+
-+int InitLPCInterface(void)
-+{
-+ int i;
-+ LPC_BUS_CTRL = 0xc0;
-+ LPC_SERIAL_IRQ_CTRL = 0xc0;
-+
-+ for(i=0;i<0x2000;i++) ;
-+
-+ LPC_SERIAL_IRQ_CTRL = 0x80;
-+ if (!SearchIT8712()) ;
-+// while(1);
-+ return 0;
-+}
-+
-+int SearchIT8712(void)
-+{
-+ unsigned char Id1, Id2;
-+ unsigned short Id;
-+ unsigned char *addr;
-+
-+ LPCEnterMBPnP();
-+ addr = LPC_KEY_ADDR;
-+ *addr = 0x20 ;
-+ addr = LPC_DATA_ADDR;
-+ Id1 = *addr ;
-+
-+ addr = LPC_KEY_ADDR;
-+ *addr = 0x21 ;
-+ addr = LPC_DATA_ADDR;
-+ Id2 = *addr ;
-+
-+ Id = (Id1 << 8) | Id2;
-+ LPCExitMBPnP();
-+
-+ if (Id == 0x8712)
-+ return 1;
-+ else
-+ return 0;
-+}
-+
-+#endif
-
---- a/arch/arm/kernel/entry-armv.S
-+++ b/arch/arm/kernel/entry-armv.S
-@@ -18,6 +18,8 @@
- #include <asm/memory.h>
- #include <asm/glue.h>
- #include <asm/vfpmacros.h>
-+#include <asm/arch/irqs.h>
-+#include <asm/hardware.h>
- #include <asm/arch/entry-macro.S>
- #include <asm/thread_notify.h>
-
---- a/arch/arm/kernel/irq.c
-+++ b/arch/arm/kernel/irq.c
-@@ -40,6 +40,8 @@
- #include <asm/system.h>
- #include <asm/mach/time.h>
-
-+extern int fixup_irq(unsigned int irq);
-+
- /*
- * No architecture-specific irq_finish function defined in arm/arch/irqs.h.
- */
-@@ -111,8 +113,11 @@ static struct irq_desc bad_irq_desc = {
- asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
- {
- struct pt_regs *old_regs = set_irq_regs(regs);
-- struct irq_desc *desc = irq_desc + irq;
-+// struct irq_desc *desc = irq_desc + irq;
-+ struct irq_desc *desc;
-
-+ irq = fixup_irq(irq);
-+ desc = irq_desc + irq;
- /*
- * Some hardware gives randomly wrong interrupts. Rather
- * than crashing, do something sensible.
---- a/arch/arm/kernel/process.c
-+++ b/arch/arm/kernel/process.c
-@@ -117,7 +117,7 @@ void arm_machine_restart(char mode)
- void (*pm_idle)(void);
- EXPORT_SYMBOL(pm_idle);
-
--void (*pm_power_off)(void);
-+//void (*pm_power_off)(void);
- EXPORT_SYMBOL(pm_power_off);
-
- void (*arm_pm_restart)(char str) = arm_machine_restart;
-@@ -188,13 +188,37 @@ __setup("reboot=", reboot_setup);
-
- void machine_halt(void)
- {
-+ unsigned int reg_v;
-+
-+ printk("arch_power_off\n");
-+
-+ reg_v = readl(IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04);
-+ reg_v &= ~0x00000002;
-+ reg_v |= 0x1;
-+ mdelay(5);
-+ // Power off
-+ __raw_writel( reg_v, IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04);
-+
- }
-
-
- void machine_power_off(void)
- {
-- if (pm_power_off)
-+ unsigned int reg_v;
-+
-+// if (pm_power_off)
-+ if (&pm_power_off!=NULL)
- pm_power_off();
-+
-+ printk("arch_power_off\n");
-+
-+ reg_v = readl(IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04);
-+ reg_v &= ~0x00000002;
-+ reg_v |= 0x1;
-+ mdelay(5);
-+ // Power off
-+ __raw_writel( reg_v, IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04);
-+
- }
-
- void machine_restart(char * __unused)
---- a/arch/arm/kernel/time.c
-+++ b/arch/arm/kernel/time.c
-@@ -502,8 +502,13 @@ static int __init timer_init_sysfs(void)
-
- device_initcall(timer_init_sysfs);
-
-+extern unsigned int rtc_get_time_second(void);
-+
- void __init time_init(void)
- {
-+#ifdef CONFIG_SL2312_RTC
-+ xtime.tv_sec = rtc_get_time_second() ;
-+#endif
- #ifndef CONFIG_GENERIC_TIME
- if (system_timer->offset == NULL)
- system_timer->offset = dummy_gettimeoffset;
---- /dev/null
-+++ b/arch/arm/mach-sl2312/Kconfig
-@@ -0,0 +1,33 @@
-+
-+menu "SL2312"
-+
-+config SL3516_ASIC
-+ bool "SL3516 ASIC version"
-+ depends on ARCH_SL2312
-+ help
-+ This option to select AISC or FPGA
-+config PCI
-+ bool "SL2312 PCI"
-+ depends on ARCH_SL2312
-+ help
-+ This option to enable Storlink PCI controller
-+
-+config SL2312_LPC
-+ bool "SL2312 LPC"
-+ depends on ARCH_SL2312
-+ help
-+ This option to enable Low Pin Count controller
-+
-+config SL2312_USB
-+ bool "SL2312 USB"
-+ depends on ARCH_SL2312
-+ help
-+ This option to enable USB OTG host controller
-+
-+config GEMINI_IPI
-+ bool "Gemini IPI test"
-+ depends on ARCH_SL2312
-+ help
-+ Enable this option to test dual cpu Inter-Processor-Interrupt
-+endmenu
-+
---- /dev/null
-+++ b/arch/arm/mach-sl2312/Makefile
-@@ -0,0 +1,16 @@
-+#
-+# Makefile for the linux kernel.
-+#
-+
-+# Object file lists.
-+
-+obj-y := arch.o irq.o mm.o time.o sl3516_device.o
-+obj-m :=
-+obj-n :=
-+
-+
-+obj-$(CONFIG_PCI) += pci.o
-+obj-$(CONFIG_SL2312_LPC) += lpc.o
-+obj-$(CONFIG_SL2312_USB) += sl2312-otg.o # sl2312-otg-1.o
-+obj-$(CONFIG_GEMINI_XOR_ACCE) += xor.o
-+obj-$(CONFIG_GEMINI_IPI) += gemini_ipi.o
---- /dev/null
-+++ b/arch/arm/mach-sl2312/Makefile.boot
-@@ -0,0 +1,5 @@
-+ zreladdr-y := 0x00008000
-+params_phys-y := 0x00508100
-+#params_phys-y := 0x00008100
-+initrd_phys-y := 0x00800000
-+
---- /dev/null
-+++ b/arch/arm/mach-sl2312/arch.c
-@@ -0,0 +1,72 @@
-+/*
-+ * linux/arch/arm/mach-epxa10db/arch.c
-+ *
-+ * Copyright (C) 2000 Deep Blue Solutions Ltd
-+ * Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#include <linux/types.h>
-+#include <linux/init.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/time.h>
-+#include <asm/mach/arch.h>
-+
-+extern void sl2312_map_io(void);
-+extern void sl2312_init_irq(void);
-+extern unsigned long sl2312_gettimeoffset (void);
-+extern void __init sl2312_time_init(void);
-+
-+static struct sys_timer sl2312_timer = {
-+ .init = sl2312_time_init,
-+ .offset = sl2312_gettimeoffset,
-+};
-+
-+static void __init
-+sl2312_fixup(struct machine_desc *desc, struct tag *tags,
-+ char **cmdline, struct meminfo *mi)
-+{
-+ mi->nr_banks = 1;
-+ mi->bank[0].start = 0;
-+#ifdef CONFIG_GEMINI_IPI
-+ mi->bank[0].size = (64*1024*1024); // 128M
-+#else
-+ mi->bank[0].size = (128*1024*1024); // 128M
-+#endif
-+ mi->bank[0].node = 0;
-+}
-+
-+/* MACHINE_START(SL2312, "GeminiA")
-+ MAINTAINER("Storlink Semi")
-+ BOOT_MEM(0x00000000, 0x90000000, 0xf0000000)
-+ FIXUP(sl2312_fixup)
-+ MAPIO(sl2312_map_io)
-+ INITIRQ(sl2312_init_irq)
-+ .timer = &sl2312_timer,
-+MACHINE_END */
-+
-+MACHINE_START(SL2312, "GeminiA")
-+ /* .phys_ram = 0x00000000, */
-+ .phys_io = 0x7fffc000,
-+ .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc,
-+ .boot_params = 0x100,
-+ .fixup = sl2312_fixup,
-+ .map_io = sl2312_map_io,
-+ .init_irq = sl2312_init_irq,
-+ .timer = &sl2312_timer,
-+MACHINE_END
---- /dev/null
-+++ b/arch/arm/mach-sl2312/gemini_ipi.c
-@@ -0,0 +1,593 @@
-+/*
-+ * FILE NAME sl_cir.c
-+ *
-+ * BRIEF MODULE DESCRIPTION
-+ * IPI Driver for CPU1.
-+ *
-+ * Author: StorLink, Corp.
-+ * Jason Lee
-+ *
-+ * Copyright 2002~2006 StorLink, Corp.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
-+ * WARRANTIES, INCLUDING, BUT NOT LIMit8712D TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
-+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ * NOT LIMit8712D TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
-+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, writ8712 to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <linux/miscdevice.h>
-+#include <linux/init.h>
-+#include <linux/pagemap.h>
-+#include <asm/uaccess.h>
-+#include <linux/ioport.h>
-+#include <linux/sched.h>
-+#include <linux/delay.h>
-+#include <linux/fs.h>
-+#include <linux/interrupt.h>
-+#include <asm/io.h>
-+#include <asm/delay.h>
-+#include <linux/signal.h>
-+#include <asm/arch/sl2312.h>
-+#include <asm/arch/int_ctrl.h>
-+#include <asm/arch/ipi.h>
-+#include <linux/dma-mapping.h>
-+
-+
-+#include <linux/mm.h>
-+
-+#include <linux/bootmem.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/page.h>
-+#include <asm/setup.h>
-+#include <asm/pgtable.h>
-+#include <asm/pgalloc.h>
-+
-+#include <asm/mach/map.h>
-+
-+
-+static int sl_ipi_debug = 1 ;
-+#define DEB(x) if(sl_ipi_debug>=1) x
-+
-+#define SRAM_PTR IO_ADDRESS(SL2312_SRAM_BASE)
-+volatile JSCALE_REQ_T *req=(JSCALE_REQ_T*)SRAM_PTR;
-+volatile JSCALE_RSP_T *rsp=(JSCALE_RSP_T*)(SRAM_PTR+0x20);
-+
-+unsigned int jscale_status=0;
-+
-+#define JSCALE_WAIT 0
-+#define XXXXXX_WAIT 1
-+#define MAX_WAIT_Q 8
-+wait_queue_head_t gemini_ipi_wait[MAX_WAIT_Q];
-+
-+#define DRAMCTL_DMA_CTL 0X20
-+#define DRAMCTL_DMA_SA 0X24
-+#define DRAMCTL_DMA_DA 0X28
-+#define DRAMCTL_DMA_CNT 0X2C
-+#define MEMCPY_UNIT 0x40000
-+int hw_memcpy(const void *to, const void *from, unsigned int bytes)
-+{
-+ unsigned int reg_a,reg_d;
-+ int count = bytes,i=0;
-+
-+ consistent_sync((unsigned int *)to, bytes, DMA_BIDIRECTIONAL);
-+ consistent_sync((unsigned int *)from,bytes, DMA_TO_DEVICE);
-+
-+ DEB(printk("hwmemcpy:count %d\n",count));
-+ while(count>0){
-+ // SA
-+ reg_a = IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_SA;
-+ reg_d = (unsigned int )__virt_to_phys(from) + i*MEMCPY_UNIT;
-+ DEB(printk("hwmemcpy:from 0x%08x\n",reg_d));
-+ writel(reg_d,reg_a);
-+ // DA
-+ reg_a = IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_DA;
-+ reg_d = (unsigned int )__virt_to_phys(to) + i*MEMCPY_UNIT;
-+ writel(reg_d,reg_a);
-+ DEB(printk("hwmemcpy:to 0x%08x\n",reg_d));
-+ // byte count
-+ reg_a = IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_CNT;
-+ reg_d = (count>=MEMCPY_UNIT)?MEMCPY_UNIT:count;
-+ writel(reg_d,reg_a);
-+ // start DMA
-+ reg_a = IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_CTL;
-+ writel(0x80000001,reg_a);
-+
-+ do{
-+ cond_resched();
-+// msleep(4);
-+ reg_d = readl(IO_ADDRESS(SL2312_DRAM_CTRL_BASE)+DRAMCTL_DMA_CTL);
-+ }while(reg_d&0x1);
-+
-+ count -= MEMCPY_UNIT;
-+ i++;
-+ }
-+
-+ return bytes;
-+}
-+
-+static irqreturn_t ipi_interrupt()
-+{
-+ unsigned int id=getcpuid(),tmp;
-+
-+ //dmac_inv_range(__phys_to_virt(SL2312_SRAM_BASE),__phys_to_virt(SHAREADDR)+0x2000);
-+
-+
-+ // Clear Interrupt
-+ if(id==CPU0) {
-+ tmp = readl(CPU1_STATUS);
-+ tmp &= ~CPU_IPI_BIT_MASK;
-+ writel(tmp,CPU1_STATUS);
-+ }
-+ else{
-+ tmp = readl(CPU0_STATUS);
-+ tmp &= ~CPU_IPI_BIT_MASK;
-+ writel(tmp,CPU0_STATUS);
-+ }
-+
-+ //
-+ DEB(printk("ipi interrupt:0x%x\n",rsp->status));
-+ switch(rsp->status){
-+ case JSCALE_STATUS_OK:
-+
-+ break;
-+ case JSCALE_UNKNOWN_MSG_TYPE:
-+
-+ break;
-+ case JSCALE_FAILED_FILE_SIZE:
-+
-+ break;
-+ case JSCALE_FAILED_MALLOC:
-+
-+ break;
-+ case JSCALE_FAILED_FORMAT:
-+
-+ break;
-+ case JSCALE_DECODE_ERROR:
-+
-+ break;
-+
-+ }
-+ jscale_status = rsp->status;
-+// wake_up(&gemini_ipi_wait[JSCALE_WAIT]);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int gemini_ipi_open(struct inode *inode, struct file *file)
-+{
-+ DEB(printk("ipi open\n"));
-+ return 0;
-+}
-+
-+
-+static int gemini_ipi_release(struct inode *inode, struct file *file)
-+{
-+ DEB(printk("ipi release\n"));
-+ return 0;
-+}
-+
-+
-+static int gemini_ipi_ioctl(struct inode *inode, struct file *file,
-+ unsigned int cmd, unsigned long arg)
-+{
-+ JSCALE_RSP_T tmp;
-+
-+ switch(cmd) {
-+ case GEMINI_IPI_JSCALE_REQ:
-+ DEB(printk("ipi:ioctl jscale request %dX%d Q:%d\n",req->ScaledImageWidth,req->ScaledImageHeight,req->ScaledImageQuality));
-+ if (copy_from_user(req, (JSCALE_REQ_T *)arg, sizeof(JSCALE_REQ_T)))
-+ return -EFAULT;
-+ req->hdr.type = IPC_JSCALE_REQ_MSG;
-+ req->hdr.length = sizeof(JSCALE_REQ_T);
-+ req->input_location = CPU_1_DATA_OFFSET;
-+ req->output_location = CPU_1_DATA_OFFSET;
-+ break;
-+ case GEMINI_IPI_JSCALE_STAT:
-+ DEB(printk("ipi:ioctl jscale stat \n"));
-+ if(jscale_status==JSCALE_BUSY){ // not yet
-+ tmp.status = JSCALE_BUSY;
-+ if (copy_to_user((JSCALE_RSP_T *)arg,&tmp, sizeof(JSCALE_RSP_T)))
-+ return -EFAULT;
-+ }
-+ else{ // finish or error
-+ if (copy_to_user((JSCALE_RSP_T *)arg,rsp, sizeof(JSCALE_RSP_T)))
-+ return -EFAULT;
-+ }
-+ break;
-+ default:
-+ printk("IPI: Error IOCTL number\n");
-+ return -ENOIOCTLCMD;
-+ }
-+
-+ return 0;
-+}
-+
-+#define SRAM_SIZE 0x2000
-+static ssize_t gemini_ipi_write(struct file *file_p, const char *buf, size_t count, loff_t * ppos)
-+{
-+ int i=0,tmp=0,j;
-+ const char *ptr=(unsigned int)__phys_to_virt(CPU_1_MEM_BASE+CPU_1_DATA_OFFSET);
-+ DEB(printk("ipi:write 0x%x to 0x%x length:%d\n",&buf,ptr,count));
-+ memcpy(ptr,buf,count);
-+ consistent_sync(ptr,count, DMA_TO_DEVICE);
-+ //hw_memcpy(ptr,&buf,count);
-+
-+/* if(count>SRAM_SIZE){
-+ for(i=0;i<(count/SRAM_SIZE);i++)
-+ raid_memcpy(ptr+i*SRAM_SIZE,buf+i*SRAM_SIZE,SRAM_SIZE);
-+ if(count%SRAM_SIZE)
-+ raid_memcpy(ptr+i*SRAM_SIZE,buf+i*SRAM_SIZE,count%SRAM_SIZE);
-+ }
-+ else
-+ raid_memcpy(ptr,buf,count);
-+*/
-+
-+/* for(i=0;i<count;i++){
-+ if(buf[i]!=ptr[i])
-+ printk("ipi error:offset %d valud %x[should %x]\n",i,ptr[i],buf[i]);
-+ }
-+
-+ printk("===========input buf===============\n");
-+ for(i=0;i<64;i+=16){
-+ for(j=0;j<16;j++)
-+ printk("%02x ",buf[i+j]);
-+ printk("\n");
-+ cond_resched();
-+ }
-+ printk("===========output buf==============\n");
-+ for(i=0;i<64;i+=16){
-+ for(j=0;j<16;j++)
-+ printk("%02x ",ptr[i+j]);
-+ printk("\n");
-+ cond_resched();
-+ }
-+*/
-+ // send irq for CPU1
-+ tmp |= CPU_IPI_BIT_MASK;
-+ writel(tmp,CPU0_STATUS);
-+ jscale_status = JSCALE_BUSY;
-+
-+ return count;
-+}
-+
-+static ssize_t gemini_ipi_read(struct file * file_p, char *buf, size_t length, loff_t * ppos)
-+{
-+ int i=0;
-+ const char *ptr=(unsigned int )__phys_to_virt(CPU_1_MEM_BASE+CPU_1_DATA_OFFSET);
-+
-+ consistent_sync(ptr,length, DMA_FROM_DEVICE);
-+ memcpy(buf,ptr,length);
-+ DEB(printk("ipi:read 0x%x to 0x%x length:%d\n",ptr,buf,length));
-+
-+ //consistent_sync((unsigned int *)ptr,0x2000, DMA_FROM_DEVICE); // invalid
-+ //hw_memcpy(buf,ptr,length);
-+
-+ // need encoded file size ********
-+/* if(count>SRAM_SIZE){
-+ for(i=0;i<(count/SRAM_SIZE);i++)
-+ raid_memcpy(buf+i*SRAM_SIZE,p_mbox->message+i*SRAM_SIZE,SRAM_SIZE);
-+ if(count%0xFFFF)
-+ raid_memcpy(buf+i*SRAM_SIZE,p_mbox->message+i*SRAM_SIZE,length%SRAM_SIZE);
-+ }
-+ else
-+ raid_memcpy(buf,p_mbox->message,length);
-+*/
-+ return length;
-+}
-+
-+void do_mapping_read(struct address_space *mapping,
-+ struct file_ra_state *_ra,
-+ struct file *filp,
-+ loff_t *ppos,
-+ read_descriptor_t *desc,
-+ read_actor_t actor)
-+{
-+ struct inode *inode = mapping->host;
-+ unsigned long index;
-+ unsigned long end_index;
-+ unsigned long offset;
-+ unsigned long last_index;
-+ unsigned long next_index;
-+ unsigned long prev_index;
-+ loff_t isize;
-+ struct page *cached_page;
-+ int error;
-+ struct file_ra_state ra = *_ra;
-+
-+ cached_page = NULL;
-+ index = *ppos >> PAGE_CACHE_SHIFT;
-+ next_index = index;
-+ prev_index = ra.prev_page;
-+ last_index = (*ppos + desc->count + PAGE_CACHE_SIZE-1) >> PAGE_CACHE_SHIFT;
-+ offset = *ppos & ~PAGE_CACHE_MASK;
-+
-+ isize = i_size_read(inode);
-+ if (!isize)
-+ goto out;
-+
-+ end_index = (isize - 1) >> PAGE_CACHE_SHIFT;
-+ for (;;) {
-+ struct page *page;
-+ unsigned long nr, ret;
-+
-+ /* nr is the maximum number of bytes to copy from this page */
-+ nr = PAGE_CACHE_SIZE;
-+ if (index >= end_index) {
-+ if (index > end_index)
-+ goto out;
-+ nr = ((isize - 1) & ~PAGE_CACHE_MASK) + 1;
-+ if (nr <= offset) {
-+ goto out;
-+ }
-+ }
-+ nr = nr - offset;
-+
-+ cond_resched();
-+ if (index == next_index)
-+ next_index = page_cache_readahead(mapping, &ra, filp,
-+ index, last_index - index);
-+
-+find_page:
-+ page = find_get_page(mapping, index);
-+ if (unlikely(page == NULL)) {
-+ handle_ra_miss(mapping, &ra, index);
-+ goto no_cached_page;
-+ }
-+ if (!PageUptodate(page))
-+ goto page_not_up_to_date;
-+page_ok:
-+
-+ /* If users can be writing to this page using arbitrary
-+ * virtual addresses, take care about potential aliasing
-+ * before reading the page on the kernel side.
-+ */
-+ if (mapping_writably_mapped(mapping))
-+ flush_dcache_page(page);
-+
-+ /*
-+ * When (part of) the same page is read multiple times
-+ * in succession, only mark it as accessed the first time.
-+ */
-+ if (prev_index != index)
-+ mark_page_accessed(page);
-+ prev_index = index;
-+
-+ /*
-+ * Ok, we have the page, and it's up-to-date, so
-+ * now we can copy it to user space...
-+ *
-+ * The actor routine returns how many bytes were actually used..
-+ * NOTE! This may not be the same as how much of a user buffer
-+ * we filled up (we may be padding etc), so we can only update
-+ * "pos" here (the actor routine has to update the user buffer
-+ * pointers and the remaining count).
-+ */
-+ ret = actor(desc, page, offset, nr);
-+ offset += ret;
-+ index += offset >> PAGE_CACHE_SHIFT;
-+ offset &= ~PAGE_CACHE_MASK;
-+
-+ page_cache_release(page);
-+ if (ret == nr && desc->count)
-+ continue;
-+ goto out;
-+
-+page_not_up_to_date:
-+ /* Get exclusive access to the page ... */
-+ lock_page(page);
-+
-+ /* Did it get unhashed before we got the lock? */
-+ if (!page->mapping) {
-+ unlock_page(page);
-+ page_cache_release(page);
-+ continue;
-+ }
-+
-+ /* Did somebody else fill it already? */
-+ if (PageUptodate(page)) {
-+ unlock_page(page);
-+ goto page_ok;
-+ }
-+
-+readpage:
-+ /* Start the actual read. The read will unlock the page. */
-+ error = mapping->a_ops->readpage(filp, page);
-+
-+ if (unlikely(error))
-+ goto readpage_error;
-+
-+ if (!PageUptodate(page)) {
-+ lock_page(page);
-+ if (!PageUptodate(page)) {
-+ if (page->mapping == NULL) {
-+ /*
-+ * invalidate_inode_pages got it
-+ */
-+ unlock_page(page);
-+ page_cache_release(page);
-+ goto find_page;
-+ }
-+ unlock_page(page);
-+ error = -EIO;
-+ goto readpage_error;
-+ }
-+ unlock_page(page);
-+ }
-+
-+ /*
-+ * i_size must be checked after we have done ->readpage.
-+ *
-+ * Checking i_size after the readpage allows us to calculate
-+ * the correct value for "nr", which means the zero-filled
-+ * part of the page is not copied back to userspace (unless
-+ * another truncate extends the file - this is desired though).
-+ */
-+ isize = i_size_read(inode);
-+ end_index = (isize - 1) >> PAGE_CACHE_SHIFT;
-+ if (unlikely(!isize || index > end_index)) {
-+ page_cache_release(page);
-+ goto out;
-+ }
-+
-+ /* nr is the maximum number of bytes to copy from this page */
-+ nr = PAGE_CACHE_SIZE;
-+ if (index == end_index) {
-+ nr = ((isize - 1) & ~PAGE_CACHE_MASK) + 1;
-+ if (nr <= offset) {
-+ page_cache_release(page);
-+ goto out;
-+ }
-+ }
-+ nr = nr - offset;
-+ goto page_ok;
-+
-+readpage_error:
-+ /* UHHUH! A synchronous read error occurred. Report it */
-+ desc->error = error;
-+ page_cache_release(page);
-+ goto out;
-+
-+no_cached_page:
-+ /*
-+ * Ok, it wasn't cached, so we need to create a new
-+ * page..
-+ */
-+ if (!cached_page) {
-+ cached_page = page_cache_alloc_cold(mapping);
-+ if (!cached_page) {
-+ desc->error = -ENOMEM;
-+ goto out;
-+ }
-+ }
-+ error = add_to_page_cache_lru(cached_page, mapping,
-+ index, GFP_KERNEL);
-+ if (error) {
-+ if (error == -EEXIST)
-+ goto find_page;
-+ desc->error = error;
-+ goto out;
-+ }
-+ page = cached_page;
-+ cached_page = NULL;
-+ goto readpage;
-+ }
-+
-+out:
-+ *_ra = ra;
-+
-+ *ppos = ((loff_t) index << PAGE_CACHE_SHIFT) + offset;
-+ if (cached_page)
-+ page_cache_release(cached_page);
-+ if (filp)
-+ file_accessed(filp);
-+}
-+
-+int ipi_send_actor(read_descriptor_t * desc, struct page *page, unsigned long offset, unsigned long size)
-+{
-+ ssize_t written;
-+ unsigned long count = desc->count;
-+ struct file *file = desc->arg.data;
-+ unsigned int *ptr_to=(unsigned int)__phys_to_virt(CPU_1_MEM_BASE+CPU_1_DATA_OFFSET) + desc->written;
-+ void *ptr_from;
-+
-+ if (size > count)
-+ size = count;
-+
-+ ptr_from = page_address(page)+offset;
-+ written = memcpy(ptr_to,ptr_from,size);
-+
-+ if (written < 0) {
-+ desc->error = written;
-+ written = 0;
-+ }
-+ desc->count = count - written;
-+ desc->written += written;
-+ return written;
-+}
-+
-+ssize_t gemini_ipi_sendfile(struct file *in_file, loff_t *ppos,
-+ size_t count, read_actor_t actor, void *TARGET)
-+{
-+ read_descriptor_t desc;
-+
-+ if (!count)
-+ return 0;
-+
-+ desc.written = 0;
-+ desc.count = count;
-+ desc.arg.data = TARGET;
-+ desc.error = 0;
-+
-+ do_mapping_read(in_file->f_mapping,&in_file->f_ra,in_file, ppos, &desc, ipi_send_actor);
-+
-+ if (desc.written)
-+ return desc.written;
-+ return desc.error;
-+}
-+static struct file_operations gemini_ipi_fops = {
-+ .owner = THIS_MODULE,
-+ .ioctl = gemini_ipi_ioctl,
-+ .open = gemini_ipi_open,
-+ .release= gemini_ipi_release,
-+ .write = gemini_ipi_write,
-+ .read = gemini_ipi_read,
-+ .sendfile = gemini_ipi_sendfile,
-+};
-+
-+#ifndef STORLINK_IPI
-+#define STORLINK_IPI 242 // Documents/devices.txt suggest to use 240~255 for local driver!!
-+#endif
-+
-+static struct miscdevice gemini_ipi_miscdev =
-+{
-+ STORLINK_IPI,
-+ "slave_ipc",
-+ &gemini_ipi_fops
-+};
-+
-+int __init sl_ipi_init(void)
-+{
-+
-+ printk("Gemini IPI Driver Initialization...\n");
-+ printk("REQ Head :0x%x(phy:0x%x)\n",(unsigned int)req,(unsigned int)SL2312_SRAM_BASE);
-+ printk("RSP Head :0x%x(phy:0x%x)\n",(unsigned int)rsp,(unsigned int)SL2312_SRAM_BASE+0x20);
-+ printk("Data buff:0x%x(phy:0x%x)\n",__phys_to_virt(CPU_1_MEM_BASE+CPU_1_DATA_OFFSET),CPU_1_MEM_BASE+CPU_1_DATA_OFFSET);
-+
-+ misc_register(&gemini_ipi_miscdev);
-+
-+ if (request_irq(IRQ_CPU0_IP_IRQ_OFFSET, ipi_interrupt, SA_INTERRUPT, "ipi", NULL))
-+ printk("Error: Register IRQ for Storlink IPI failed\n");
-+
-+ return 0;
-+}
-+
-+void __exit sl_ipi_exit(void)
-+{
-+
-+}
-+
-+module_init(sl_ipi_init);
-+module_exit(sl_ipi_exit);
-+
-+MODULE_AUTHOR("Jason Lee <jason@storlink.com.tw>");
-+MODULE_DESCRIPTION("Storlink IPI driver");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/arch/arm/mach-sl2312/hw_xor.h
-@@ -0,0 +1,573 @@
-+/*
-+* linux/include/asm-arm/xor.h
-+*
-+* Copyright (C) 2001 Storlink Semi.
-+* Jason Lee <jason@storlink.com.tw>
-+*
-+*/
-+#include <asm/arch/sl2312.h>
-+#include <asm/io.h>
-+//#include <linux/compatmac.h>
-+
-+#undef BIG_ENDIAN
-+#define CPU 0
-+#define DMA 1
-+
-+#define DESC_NO 8
-+#define TX_DESC_NUM DESC_NO
-+#define RX_DESC_NUM DESC_NO
-+
-+#define RAID_BASE_ADDR IO_ADDRESS(SL2312_RAID_BASE)
-+
-+#define SRAM_PAR_0k 0
-+#define SRAM_PAR_4k 1
-+#define SRAM_PAR_8k 2
-+#define SRAM_PAR_16k 3
-+#define SRAM_PAR_SIZE SRAM_PAR_8k
-+
-+#define RUNNING 0x1
-+#define COMPLETE 0x2
-+#define ERROR 0x4
-+
-+#define CMD_XOR 0x0
-+#define CMD_FILL 0x1
-+#define CMD_CPY 0x3
-+#define CMD_CHK 0x4
-+
-+enum RAID_DMA_REGISTER {
-+ RAID_DMA_DEVICE_ID = 0xff00,
-+ RAID_DMA_STATUS = 0xff04,
-+ RAID_FCHDMA_CTRL = 0xff08,
-+ RAID_FCHDMA_FIRST_DESC = 0xff0C,
-+ RAID_FCHDMA_CURR_DESC = 0xff10,
-+ RAID_STRDMA_CTRL = 0xff14,
-+ RAID_STRDMA_FIRST_DESC = 0xff18,
-+ RAID_STRDMA_CURR_DESC = 0xff1C,
-+ RAID_TX_FLG_REG = 0xff24,
-+ RAID_RX_FLG_REG = 0xff34,
-+ RAID_PCR = 0xff50,
-+ SMC_CMD_REG = 0xff60,
-+ SMC_STATUS_REG = 0xff64
-+ };
-+
-+enum RAID_FUNC_MODE {
-+ RAID_XOR = 0,
-+ RAID_MIX = 2,
-+ RAID_SRAM = 3,
-+ RAID_ENDIAN = 4,
-+ RAID_MEM_BLK = 5,
-+ RAID_MEM2MEM = 7,
-+ RAID_BUF_SIZE = 8,
-+ RAID_ERR_TEST = 9,
-+ RAID_BURST = 10,
-+ RAID_BUS = 11
-+ };
-+
-+typedef struct reg_info {
-+ int mask;
-+ char err[32];
-+ int offset;
-+} REG_INFO;
-+
-+/********************************************************/
-+/* the definition of RAID DMA Module Register */
-+/********************************************************/
-+typedef union
-+{
-+ unsigned int bit32;
-+ struct bits_ff00
-+ {
-+ #ifdef BIG_ENDIAN
-+ unsigned int : 8;
-+ unsigned int teytPerr : 4; /* define protocol error under tsPErrI*/
-+ unsigned int reytPerr : 14; /* define protocol error under rsPErrI */
-+ unsigned int device_id : 12;
-+ unsigned int revision_id : 4;
-+ #else
-+ unsigned int revision_id : 4;
-+ unsigned int device_id : 12;
-+ unsigned int reytPerr : 14; /* define protocol error under rsPErrI */
-+ unsigned int teytPerr : 4; /* define protocol error under tsPErrI*/
-+ unsigned int : 8;
-+ #endif
-+ } bits;
-+} RAID_DMA_DEVICE_ID_T;
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bits_ff04
-+ {
-+ #ifdef BIG_ENDIAN
-+ unsigned int tsFinishI : 1; /* owner bit error interrupt */
-+ unsigned int tsDErrI : 1; /* AHB bus error interrupt */
-+ unsigned int tsPErrI : 1; /* RAID XOR fetch descriptor protocol error interrupt */
-+ unsigned int tsEODI : 1; /* RAID XOR fetch DMA end of descriptor interrupt */
-+ unsigned int tsEOFI : 1; /* RAID XOR fetch DMA end of frame interrupt */
-+ unsigned int rsFinishI : 1; /* owner bit error interrupt */
-+ unsigned int rsDErrI : 1; /* AHB bus error while RAID XOR store interrupt */
-+ unsigned int rsPErrI : 1; /* RAID XOR store descriptor protocol error interrupt */
-+ unsigned int rsEODI : 1; /* RAID XOR store DMA end of descriptor interrupt */
-+ unsigned int rsEOFI : 1; /* RAID XOR store DMA end of frame interrupt */
-+ unsigned int inter : 8; /* pattern check error interrupt */
-+ unsigned int : 5;
-+ unsigned int Loopback : 1; /* loopback */
-+ unsigned int intEnable : 8; /*pattern check error interrupt enable */
-+ #else
-+ unsigned int intEnable : 8; /*pattern check error interrupt enable */
-+ unsigned int Loopback : 1; /* loopback */
-+ unsigned int : 5;
-+ unsigned int inter : 8; /* pattern check error interrupt */
-+ unsigned int rsEOFI : 1; /* RAID XOR store DMA end of frame interrupt */
-+ unsigned int rsEODI : 1; /* RAID XOR store DMA end of descriptor interrupt */
-+ unsigned int rsPErrI : 1; /* RAID XOR store descriptor protocol error interrupt */
-+ unsigned int rsDErrI : 1; /* AHB bus error while RAID XOR store interrupt */
-+ unsigned int rsFinishI : 1; /* owner bit error interrupt */
-+ unsigned int tsEOFI : 1; /* RAID XOR fetch DMA end of frame interrupt */
-+ unsigned int tsEODI : 1; /* RAID XOR fetch DMA end of descriptor interrupt */
-+ unsigned int tsPErrI : 1; /* RAID XOR fetch descriptor protocol error interrupt */
-+ unsigned int tsDErrI : 1; /* AHB bus error interrupt */
-+ unsigned int tsFinishI : 1; /* owner bit error interrupt */
-+ #endif
-+ } bits;
-+} RAID_DMA_STATUS_T;
-+
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bits_ff08
-+ {
-+ #ifdef BIG_ENDIAN
-+ unsigned int td_start : 1; /* Start DMA transfer */
-+ unsigned int td_continue : 1; /* Continue DMA operation */
-+ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
-+ unsigned int : 1;
-+ unsigned int td_prot : 4; /* DMA protection control */
-+ unsigned int td_burst_size : 2; /* DMA max burst size for every AHB request */
-+ unsigned int td_bus : 2; /* peripheral bus width */
-+ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */
-+ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */
-+ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */
-+ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */
-+ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */
-+ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */
-+ unsigned int : 14;
-+ #else
-+ unsigned int : 14;
-+ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */
-+ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */
-+ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */
-+ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */
-+ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */
-+ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */
-+ unsigned int td_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */
-+ unsigned int td_burst_size : 2; /* TxDMA max burst size for every AHB request */
-+ unsigned int td_prot : 4; /* TxDMA protection control */
-+ unsigned int : 1;
-+ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
-+ unsigned int td_continue : 1; /* Continue DMA operation */
-+ unsigned int td_start : 1; /* Start DMA transfer */
-+ #endif
-+ } bits;
-+} RAID_TXDMA_CTRL_T;
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bits_ff0c
-+ {
-+ #ifdef BIG_ENDIAN
-+ unsigned int td_first_des_ptr : 28;/* first descriptor address */
-+ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */
-+ unsigned int : 3;
-+ #else
-+ unsigned int : 3;
-+ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */
-+ unsigned int td_first_des_ptr : 28;/* first descriptor address */
-+ #endif
-+ } bits;
-+} RAID_TXDMA_FIRST_DESC_T;
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bits_ff10
-+ {
-+ #ifdef BIG_ENDIAN
-+ unsigned int ndar : 28; /* next descriptor address */
-+ unsigned int eofie : 1; /* end of frame interrupt enable */
-+ unsigned int : 1;
-+ unsigned int sof_eof : 2;
-+ #else
-+ unsigned int sof_eof : 2;
-+ unsigned int : 1;
-+ unsigned int eofie : 1; /* end of frame interrupt enable */
-+ unsigned int ndar : 28; /* next descriptor address */
-+ #endif
-+ } bits;
-+} RAID_TXDMA_CURR_DESC_T;
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bits_ff14
-+ {
-+ #ifdef BIG_ENDIAN
-+ unsigned int rd_start : 1; /* Start DMA transfer */
-+ unsigned int rd_continue : 1; /* Continue DMA operation */
-+ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
-+ unsigned int : 1;
-+ unsigned int rd_prot : 4; /* DMA protection control */
-+ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */
-+ unsigned int rd_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */
-+ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */
-+ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */
-+ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */
-+ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */
-+ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */
-+ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */
-+ unsigned int : 14;
-+ #else
-+ unsigned int : 14;
-+ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */
-+ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */
-+ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */
-+ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */
-+ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */
-+ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */
-+ unsigned int rd_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */
-+ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */
-+ unsigned int rd_prot : 4; /* DMA protection control */
-+ unsigned int : 1;
-+ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
-+ unsigned int rd_continue : 1; /* Continue DMA operation */
-+ unsigned int rd_start : 1; /* Start DMA transfer */
-+ #endif
-+ } bits;
-+} RAID_RXDMA_CTRL_T;
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bits_ff18
-+ {
-+ #ifdef BIG_ENDIAN
-+ unsigned int rd_first_des_ptr : 28;/* first descriptor address */
-+ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */
-+ unsigned int : 3;
-+ #else
-+ unsigned int : 3;
-+ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */
-+ unsigned int rd_first_des_ptr : 28;/* first descriptor address */
-+ #endif
-+ } bits;
-+} RAID_RXDMA_FIRST_DESC_T;
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bits_ff1c
-+ {
-+ #ifdef BIG_ENDIAN
-+ unsigned int ndar : 28; /* next descriptor address */
-+ unsigned int eofie : 1; /* end of frame interrupt enable */
-+ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */
-+ unsigned int sof_eof : 2;
-+ #else
-+ unsigned int sof_eof : 2;
-+ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */
-+ unsigned int eofie : 1; /* end of frame interrupt enable */
-+ unsigned int ndar : 28; /* next descriptor address */
-+ #endif
-+ } bits;
-+} RAID_RXDMA_CURR_DESC_T;
-+
-+typedef union
-+{
-+ unsigned int bit32;
-+ struct bits_ff50
-+ {
-+ unsigned int pat : 32; /* data for pattern check */
-+ } bits;
-+} RAID_PACR_T;
-+
-+/******************************************************/
-+/* the definition of DMA Descriptor Register */
-+/******************************************************/
-+typedef struct raid_descriptor_t
-+{
-+ union func_ctrl_t
-+ {
-+ unsigned int bit32;
-+ struct bits_0000
-+ {
-+ #ifdef BIG_ENDIAN
-+ unsigned int own : 1; /* owner bit */
-+ unsigned int derr : 1; /* data error during processing this descriptor */
-+ unsigned int perr : 1; /* protocol error during processing this descriptor */
-+ unsigned int raid_ctrl_status : 7; /* pass RAID XOR fetch/store control status to CPU */
-+ unsigned int desc_cnt : 6;
-+ unsigned int buffer_size : 16; /* transfer buffer size associated with current description*/
-+ #else
-+ unsigned int buffer_size : 16; /* transfer buffer size associated with current description*/
-+ unsigned int desc_cnt : 6;
-+ unsigned int raid_ctrl_status : 7; /* pass RAID XOR fetch/store control status to CPU */
-+ unsigned int perr : 1; /* protocol error during processing this descriptor */
-+ unsigned int derr : 1; /* data error during processing this descriptor */
-+ unsigned int own : 1; /* owner bit */
-+ #endif
-+ } bits;
-+ } func_ctrl;
-+
-+ union flg_status_t
-+ {
-+ unsigned int bits32;
-+ struct bit_004
-+ {
-+ #ifdef BIG_ENDIAN
-+ unsigned int bcc : 16;
-+ unsigned int : 13
-+ unsigned int mode : 3;
-+ #else
-+ unsigned int mode : 3;
-+ unsigned int : 13;
-+ unsigned int bcc : 16;
-+ #endif
-+ } bits_cmd_status;
-+ } flg_status; //Sanders
-+
-+ unsigned int buf_addr;
-+
-+ union next_desc_addr_t
-+ {
-+ unsigned int bits32;
-+ struct bits_000c
-+ {
-+ #ifdef BIG_ENDIAN
-+ unsigned int ndar : 28; /* next descriptor address */
-+ unsigned int eofie : 1; /* end of frame interrupt enable */
-+ unsigned int : 1;
-+ unsigned int sof_eof : 2; /* the position of the descriptor in chain */
-+ #else
-+ unsigned int sof_eof : 2; /* the position of the descriptor in chain */
-+ unsigned int : 1;
-+ unsigned int eofie : 1; /* end of frame interrupt enable */
-+ unsigned int ndar : 28; /* next descriptor address */
-+ #endif
-+ } bits;
-+ } next_desc_addr;
-+} RAID_DESCRIPTOR_T;
-+
-+/******************************************************/
-+/* the offset of RAID SMC register */
-+/******************************************************/
-+enum RAID_SMC_REGISTER {
-+ RAID_SMC_CMD_REG = 0xff60,
-+ RAID_SMC_STATUS_REG = 0xff64
-+ };
-+
-+/******************************************************/
-+/* the definition of RAID SMC module register */
-+/******************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bits_ff60
-+ {
-+ #ifdef BIG_ENDIAN
-+ unsigned int pat_mode : 2; /* partition mode selection */
-+ unsigned int : 14;
-+ unsigned int device_id : 12;
-+ unsigned int revision_id : 4;
-+ #else
-+ unsigned int revision_id : 4;
-+ unsigned int device_id : 12;
-+ unsigned int : 14;
-+ unsigned int pat_mode : 2; /* partition mode selection */
-+ #endif
-+ } bits;
-+} RAID_SMC_CMD;
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bits_ff64
-+ {
-+ #ifdef BIG_ENDIAN
-+ unsigned int addr_err1 : 1; /* address is out of range for controller 1 */
-+ unsigned int ahb_err1 : 1; /* AHB bus error for controller 1 */
-+ unsigned int : 14;
-+ unsigned int addr_err2 : 1; /* address is out of range for controller 2 */
-+ unsigned int ahb_err2 : 1; /* AHB bus error for controller 2 */
-+ unsigned int : 14;
-+ #else
-+ unsigned int : 14;
-+ unsigned int ahb_err2 : 1; /* AHB bus error for controller 2 */
-+ unsigned int addr_err2 : 1; /* address is out of range for controller 2 */
-+ unsigned int : 14;
-+ unsigned int ahb_err1 : 1; /* AHB bus error for controller 1 */
-+ unsigned int addr_err1 : 1; /* address is out of range for controller 1 */
-+ #endif
-+ } bits;
-+} RAID_SMC_STATUS;
-+
-+typedef struct RAID_S
-+{
-+ const char *device_name;
-+ wait_queue_head_t wait;
-+ unsigned int busy;
-+ int irq;
-+ unsigned int status;
-+ RAID_DESCRIPTOR_T *tx_desc; /* point to virtual TX descriptor address */
-+ RAID_DESCRIPTOR_T *rx_desc; /* point ot virtual RX descriptor address */
-+ RAID_DESCRIPTOR_T *tx_cur_desc; /* current TX descriptor */
-+ RAID_DESCRIPTOR_T *rx_cur_desc; /* current RX descriptor */
-+ RAID_DESCRIPTOR_T *tx_finished_desc;
-+ RAID_DESCRIPTOR_T *rx_finished_desc;
-+ RAID_DESCRIPTOR_T *tx_first_desc;
-+ RAID_DESCRIPTOR_T *rx_first_desc;
-+
-+// unsigned int *tx_buf[TX_DESC_NUM];
-+ unsigned int *rx_desc_dma; // physical address of rx_descript
-+ unsigned int *tx_desc_dma; // physical address of tx_descript
-+ unsigned int *rx_bufs_dma;
-+ unsigned int *tx_bufs_dma;
-+
-+} RAID_T;
-+
-+struct reg_ioctl
-+{
-+ unsigned int reg_addr;
-+ unsigned int val_in;
-+ unsigned int val_out;
-+};
-+
-+typedef struct dma_ctrl {
-+ int sram;
-+ int prot;
-+ int burst;
-+ int bus;
-+ int endian;
-+ int mode;
-+} DMA_CTRL;
-+
-+
-+#ifdef XOR_SW_FILL_IN
-+
-+#define __XOR(a1, a2) a1 ^= a2
-+
-+#define GET_BLOCK_2(dst) \
-+ __asm__("ldmia %0, {%1, %2}" \
-+ : "=r" (dst), "=r" (a1), "=r" (a2) \
-+ : "0" (dst))
-+
-+#define GET_BLOCK_4(dst) \
-+ __asm__("ldmia %0, {%1, %2, %3, %4}" \
-+ : "=r" (dst), "=r" (a1), "=r" (a2), "=r" (a3), "=r" (a4) \
-+ : "0" (dst))
-+
-+#define XOR_BLOCK_2(src) \
-+ __asm__("ldmia %0!, {%1, %2}" \
-+ : "=r" (src), "=r" (b1), "=r" (b2) \
-+ : "0" (src)); \
-+ __XOR(a1, b1); __XOR(a2, b2);
-+
-+#define XOR_BLOCK_4(src) \
-+ __asm__("ldmia %0!, {%1, %2, %3, %4}" \
-+ : "=r" (src), "=r" (b1), "=r" (b2), "=r" (b3), "=r" (b4) \
-+ : "0" (src)); \
-+ __XOR(a1, b1); __XOR(a2, b2); __XOR(a3, b3); __XOR(a4, b4)
-+
-+#define PUT_BLOCK_2(dst) \
-+ __asm__ __volatile__("stmia %0!, {%2, %3}" \
-+ : "=r" (dst) \
-+ : "0" (dst), "r" (a1), "r" (a2))
-+
-+#define PUT_BLOCK_4(dst) \
-+ __asm__ __volatile__("stmia %0!, {%2, %3, %4, %5}" \
-+ : "=r" (dst) \
-+ : "0" (dst), "r" (a1), "r" (a2), "r" (a3), "r" (a4))
-+
-+static void
-+xor_arm4regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
-+{
-+ unsigned int lines = bytes / sizeof(unsigned long) / 4;
-+ register unsigned int a1 __asm__("r4");
-+ register unsigned int a2 __asm__("r5");
-+ register unsigned int a3 __asm__("r6");
-+ register unsigned int a4 __asm__("r7");
-+ register unsigned int b1 __asm__("r8");
-+ register unsigned int b2 __asm__("r9");
-+ register unsigned int b3 __asm__("ip");
-+ register unsigned int b4 __asm__("lr");
-+
-+ do {
-+ GET_BLOCK_4(p1);
-+ XOR_BLOCK_4(p2);
-+ PUT_BLOCK_4(p1);
-+ } while (--lines);
-+}
-+
-+static void
-+xor_arm4regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-+ unsigned long *p3)
-+{
-+ unsigned int lines = bytes / sizeof(unsigned long) / 4;
-+ register unsigned int a1 __asm__("r4");
-+ register unsigned int a2 __asm__("r5");
-+ register unsigned int a3 __asm__("r6");
-+ register unsigned int a4 __asm__("r7");
-+ register unsigned int b1 __asm__("r8");
-+ register unsigned int b2 __asm__("r9");
-+ register unsigned int b3 __asm__("ip");
-+ register unsigned int b4 __asm__("lr");
-+
-+ do {
-+ GET_BLOCK_4(p1);
-+ XOR_BLOCK_4(p2);
-+ XOR_BLOCK_4(p3);
-+ PUT_BLOCK_4(p1);
-+ } while (--lines);
-+}
-+
-+static void
-+xor_arm4regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-+ unsigned long *p3, unsigned long *p4)
-+{
-+ unsigned int lines = bytes / sizeof(unsigned long) / 2;
-+ register unsigned int a1 __asm__("r8");
-+ register unsigned int a2 __asm__("r9");
-+ register unsigned int b1 __asm__("ip");
-+ register unsigned int b2 __asm__("lr");
-+
-+ do {
-+ GET_BLOCK_2(p1);
-+ XOR_BLOCK_2(p2);
-+ XOR_BLOCK_2(p3);
-+ XOR_BLOCK_2(p4);
-+ PUT_BLOCK_2(p1);
-+ } while (--lines);
-+}
-+
-+static void
-+xor_arm4regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-+ unsigned long *p3, unsigned long *p4, unsigned long *p5)
-+{
-+ unsigned int lines = bytes / sizeof(unsigned long) / 2;
-+ register unsigned int a1 __asm__("r8");
-+ register unsigned int a2 __asm__("r9");
-+ register unsigned int b1 __asm__("ip");
-+ register unsigned int b2 __asm__("lr");
-+
-+ do {
-+ GET_BLOCK_2(p1);
-+ XOR_BLOCK_2(p2);
-+ XOR_BLOCK_2(p3);
-+ XOR_BLOCK_2(p4);
-+ XOR_BLOCK_2(p5);
-+ PUT_BLOCK_2(p1);
-+ } while (--lines);
-+}
-+#endif //XOR_SW_FILL_IN
-+
---- /dev/null
-+++ b/arch/arm/mach-sl2312/irq.c
-@@ -0,0 +1,202 @@
-+/*
-+ * linux/arch/arm/mach-epxa10db/irq.c
-+ *
-+ * Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#include <linux/init.h>
-+#include <linux/ioport.h>
-+#include <linux/stddef.h>
-+#include <linux/list.h>
-+#include <linux/sched.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/io.h>
-+#include <asm/mach/irq.h>
-+#include <asm/arch/platform.h>
-+#include <asm/arch/int_ctrl.h>
-+
-+#ifdef CONFIG_PCI
-+#include <asm/arch/pci.h>
-+#endif
-+
-+int fixup_irq(unsigned int irq)
-+{
-+#ifdef CONFIG_PCI
-+ if (irq == IRQ_PCI) {
-+ return sl2312_pci_get_int_src();
-+ }
-+#endif
-+ return irq;
-+}
-+
-+static void sl2312_ack_irq(unsigned int irq)
-+{
-+ __raw_writel(1 << irq, IRQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+}
-+
-+static void sl2312_mask_irq(unsigned int irq)
-+{
-+ unsigned int mask;
-+
-+#ifdef CONFIG_PCI
-+ if (irq >= PCI_IRQ_OFFSET)
-+ {
-+ mask = __raw_readl(IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+ mask &= ~IRQ_PCI_MASK ;
-+ __raw_writel(mask, IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+ sl2312_pci_mask_irq(irq - PCI_IRQ_OFFSET);
-+ }
-+ else
-+#endif
-+ if(irq >= FIQ_OFFSET)
-+ {
-+ mask = __raw_readl(FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+ mask &= ~(1 << (irq - FIQ_OFFSET));
-+ __raw_writel(mask, FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+ }
-+ else
-+ {
-+ mask = __raw_readl(IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+ mask &= ~(1 << irq);
-+ __raw_writel(mask, IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+ }
-+
-+}
-+
-+static void sl2312_unmask_irq(unsigned int irq)
-+{
-+ unsigned int mask;
-+
-+#ifdef CONFIG_PCI
-+ if (irq >= PCI_IRQ_OFFSET)
-+ {
-+ mask = __raw_readl(IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+ mask |= IRQ_PCI_MASK ;
-+ __raw_writel(mask, IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+ sl2312_pci_unmask_irq(irq - PCI_IRQ_OFFSET);
-+ }
-+ else
-+#endif
-+ if(irq >= FIQ_OFFSET)
-+ {
-+ mask = __raw_readl(FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+ mask |= (1 << (irq - FIQ_OFFSET));
-+ __raw_writel(mask, FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+ }
-+ else
-+ {
-+ mask = __raw_readl(IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+ mask |= (1 << irq);
-+ __raw_writel(mask, IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+ }
-+}
-+
-+static struct irq_chip sl2312_level_irq = {
-+ .ack = sl2312_mask_irq,
-+ .mask = sl2312_mask_irq,
-+ .unmask = sl2312_unmask_irq,
-+// .set_type = ixp4xx_set_irq_type,
-+};
-+
-+static struct irq_chip sl2312_edge_irq = {
-+ .ack = sl2312_ack_irq,
-+ .mask = sl2312_mask_irq,
-+ .unmask = sl2312_unmask_irq,
-+// .set_type = ixp4xx_set_irq_type,
-+};
-+
-+static struct resource irq_resource = {
-+ .name = "irq_handler",
-+ .start = IO_ADDRESS(SL2312_INTERRUPT_BASE),
-+ .end = IO_ADDRESS(FIQ_STATUS(SL2312_INTERRUPT_BASE))+4,
-+};
-+
-+void __init sl2312_init_irq(void)
-+{
-+ unsigned int i, mode, level;
-+
-+ request_resource(&iomem_resource, &irq_resource);
-+
-+ for (i = 0; i < NR_IRQS; i++)
-+ {
-+ if((i>=IRQ_TIMER1 && i<=IRQ_TIMER3)||(i>=IRQ_SERIRQ0 && i<=IRQ_SERIRQ_MAX))
-+ {
-+ set_irq_chip(i, &sl2312_edge_irq);
-+ set_irq_handler(i, handle_edge_irq);
-+ }
-+ else
-+ {
-+ set_irq_chip(i, &sl2312_level_irq);
-+ set_irq_handler(i,handle_level_irq);
-+ }
-+ set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-+ }
-+
-+ /* Disable all interrupt */
-+ __raw_writel(0,IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+ __raw_writel(0,FIQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+
-+ /* Set interrupt mode */
-+ /* emac & ipsec type is level trigger and high active */
-+ mode = __raw_readl(IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+ level = __raw_readl(IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+
-+ mode &= ~IRQ_GMAC0_MASK;
-+ level &= ~IRQ_GMAC0_MASK;
-+
-+ mode &= ~IRQ_GMAC1_MASK;
-+ level &= ~IRQ_GMAC1_MASK;
-+
-+ mode &= ~IRQ_IPSEC_MASK;
-+ level &= ~IRQ_IPSEC_MASK;
-+
-+ // for IDE0,1, high active and level trigger
-+ mode &= ~IRQ_IDE0_MASK;
-+ level &= ~IRQ_IDE0_MASK;
-+ mode &= ~IRQ_IDE1_MASK;
-+ level &= ~IRQ_IDE1_MASK;
-+
-+
-+ // for PCI, high active and level trigger
-+ mode &= ~IRQ_PCI_MASK;
-+ level &= ~IRQ_PCI_MASK;
-+
-+ // for USB, high active and level trigger
-+ mode &= ~IRQ_USB0_MASK;
-+ level &= ~IRQ_USB0_MASK;
-+
-+ mode &= ~IRQ_USB1_MASK;
-+ level &= ~IRQ_USB1_MASK;
-+
-+ // for LPC, high active and edge trigger
-+ mode |= 0xffff0000;
-+ level &= 0x0000ffff;
-+
-+ // for GPIO, high active and level trigger
-+ mode &= ~(IRQ_GPIO_MASK);
-+ level &= ~(IRQ_GPIO_MASK);
-+
-+ mode &= ~(IRQ_GPIO1_MASK);
-+ level &= ~(IRQ_GPIO1_MASK);
-+
-+ mode &= ~(IRQ_GPIO2_MASK);
-+ level &= ~(IRQ_GPIO2_MASK);
-+
-+ __raw_writel(mode,IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+ __raw_writel(level,IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+
-+}
---- /dev/null
-+++ b/arch/arm/mach-sl2312/lpc.c
-@@ -0,0 +1,125 @@
-+/*
-+ *
-+ * BRIEF MODULE DESCRIPTION
-+ * ITE Semi IT8712 Super I/O functions.
-+ *
-+ * Copyright 2001 MontaVista Software Inc.
-+ * Author: MontaVista Software, Inc.
-+ * ppopov@mvista.com or source@mvista.com
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
-+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
-+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
-+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/delay.h>
-+#include <asm/io.h>
-+#include <asm/types.h>
-+#include <asm/arch/it8712.h>
-+#include <linux/init.h>
-+#include <asm/arch/hardware.h>
-+
-+#ifndef TRUE
-+#define TRUE 1
-+#endif
-+
-+#ifndef FALSE
-+#define FALSE 0
-+#endif
-+
-+
-+// MB PnP configuration register
-+#define LPC_KEY_ADDR (IO_ADDRESS(SL2312_LPC_IO_BASE) + 0x2e)
-+#define LPC_DATA_ADDR (IO_ADDRESS(SL2312_LPC_IO_BASE) + 0x2f)
-+
-+#define LPC_BUS_CTRL *(volatile unsigned char*) (IO_ADDRESS(SL2312_LPC_HOST_BASE) + 0)
-+#define LPC_BUS_STATUS *(volatile unsigned char*) (IO_ADDRESS(SL2312_LPC_HOST_BASE) + 2)
-+#define LPC_SERIAL_IRQ_CTRL *(volatile unsigned char*) (IO_ADDRESS(SL2312_LPC_HOST_BASE) + 4)
-+
-+int it8712_exist;
-+
-+static void LPCEnterMBPnP(void)
-+{
-+ int i;
-+ unsigned char key[4] = {0x87, 0x01, 0x55, 0x55};
-+
-+ for (i = 0; i<4; i++)
-+ outb(key[i], LPC_KEY_ADDR);
-+
-+}
-+
-+static void LPCExitMBPnP(void)
-+{
-+ outb(0x02, LPC_KEY_ADDR);
-+ outb(0x02, LPC_DATA_ADDR);
-+}
-+
-+void LPCSetConfig(char LdnNumber, char Index, char data)
-+{
-+ LPCEnterMBPnP(); // Enter IT8712 MB PnP mode
-+ outb(0x07, LPC_KEY_ADDR);
-+ outb(LdnNumber, LPC_DATA_ADDR);
-+ outb(Index, LPC_KEY_ADDR);
-+ outb(data, LPC_DATA_ADDR);
-+ LPCExitMBPnP();
-+}
-+
-+char LPCGetConfig(char LdnNumber, char Index)
-+{
-+ char rtn;
-+
-+ LPCEnterMBPnP(); // Enter IT8712 MB PnP mode
-+ outb(0x07, LPC_KEY_ADDR);
-+ outb(LdnNumber, LPC_DATA_ADDR);
-+ outb(Index, LPC_KEY_ADDR);
-+ rtn = inb(LPC_DATA_ADDR);
-+ LPCExitMBPnP();
-+ return rtn;
-+}
-+
-+static int SearchIT8712(void)
-+{
-+ unsigned char Id1, Id2;
-+ unsigned short Id;
-+
-+ LPCEnterMBPnP();
-+ outb(0x20, LPC_KEY_ADDR); /* chip id byte 1 */
-+ Id1 = inb(LPC_DATA_ADDR);
-+ outb(0x21, LPC_KEY_ADDR); /* chip id byte 2 */
-+ Id2 = inb(LPC_DATA_ADDR);
-+ Id = (Id1 << 8) | Id2;
-+ LPCExitMBPnP();
-+ if (Id == 0x8712)
-+ return TRUE;
-+ else
-+ return FALSE;
-+}
-+
-+int InitLPCInterface(void)
-+{
-+ LPC_BUS_CTRL = 0xc0;
-+ LPC_SERIAL_IRQ_CTRL = 0xc0;
-+ mdelay(1); // wait for 1 serial IRQ cycle
-+ LPC_SERIAL_IRQ_CTRL = 0x80;
-+ it8712_exist = SearchIT8712();
-+ printk("IT8712 %s exist\n", it8712_exist?"":"doesn't");
-+ return 0;
-+}
-+
-+//__initcall(InitLPCInterface);
---- /dev/null
-+++ b/arch/arm/mach-sl2312/mm.c
-@@ -0,0 +1,80 @@
-+/*
-+ * linux/arch/arm/mach-epxa10db/mm.c
-+ *
-+ * MM routines for Altera'a Epxa10db board
-+ *
-+ * Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#include <linux/sched.h>
-+#include <linux/mm.h>
-+#include <linux/init.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/io.h>
-+#include <asm/pgtable.h>
-+#include <asm/page.h>
-+#include <asm/sizes.h>
-+
-+#include <asm/mach/map.h>
-+
-+/* Page table mapping for I/O region */
-+static struct map_desc sl2312_io_desc[] __initdata = {
-+#ifdef CONFIG_GEMINI_IPI
-+{__phys_to_virt(CPU_1_MEM_BASE), __phys_to_pfn(CPU_1_MEM_BASE), SZ_64M, MT_MEMORY},
-+#endif
-+{IO_ADDRESS(SL2312_SRAM_BASE), __phys_to_pfn(SL2312_SRAM_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_DRAM_CTRL_BASE), __phys_to_pfn(SL2312_DRAM_CTRL_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_GLOBAL_BASE), __phys_to_pfn(SL2312_GLOBAL_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_WAQTCHDOG_BASE), __phys_to_pfn(SL2312_WAQTCHDOG_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_UART_BASE), __phys_to_pfn(SL2312_UART_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_TIMER_BASE), __phys_to_pfn(SL2312_TIMER_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_LCD_BASE), __phys_to_pfn(SL2312_LCD_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_RTC_BASE), __phys_to_pfn(SL2312_RTC_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_SATA_BASE), __phys_to_pfn(SL2312_SATA_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_LPC_HOST_BASE), __phys_to_pfn(SL2312_LPC_HOST_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_LPC_IO_BASE), __phys_to_pfn(SL2312_LPC_IO_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_INTERRUPT_BASE), __phys_to_pfn(SL2312_INTERRUPT_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_INTERRUPT1_BASE), __phys_to_pfn(SL2312_INTERRUPT1_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_SSP_CTRL_BASE), __phys_to_pfn(SL2312_SSP_CTRL_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_POWER_CTRL_BASE), __phys_to_pfn(SL2312_POWER_CTRL_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_CIR_BASE), __phys_to_pfn(SL2312_CIR_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_GPIO_BASE), __phys_to_pfn(SL2312_GPIO_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_GPIO_BASE1), __phys_to_pfn(SL2312_GPIO_BASE1), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_GPIO_BASE2), __phys_to_pfn(SL2312_GPIO_BASE2), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_PCI_IO_BASE), __phys_to_pfn(SL2312_PCI_IO_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_PCI_MEM_BASE), __phys_to_pfn(SL2312_PCI_MEM_BASE), SZ_512K, MT_DEVICE},
-+#ifdef CONFIG_NET_SL351X
-+{IO_ADDRESS(SL2312_TOE_BASE), __phys_to_pfn(SL2312_TOE_BASE) , SZ_512K, MT_DEVICE},
-+#endif
-+{IO_ADDRESS(SL2312_GMAC0_BASE), __phys_to_pfn(SL2312_GMAC0_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_GMAC1_BASE), __phys_to_pfn(SL2312_GMAC1_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_SECURITY_BASE), __phys_to_pfn(SL2312_SECURITY_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_IDE0_BASE), __phys_to_pfn(SL2312_IDE0_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_IDE1_BASE), __phys_to_pfn(SL2312_IDE1_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_RAID_BASE), __phys_to_pfn(SL2312_RAID_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_FLASH_CTRL_BASE), __phys_to_pfn(SL2312_FLASH_CTRL_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_DRAM_CTRL_BASE), __phys_to_pfn(SL2312_DRAM_CTRL_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_GENERAL_DMA_BASE), __phys_to_pfn(SL2312_GENERAL_DMA_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_USB0_BASE), __phys_to_pfn(SL2312_USB_BASE), SZ_512K, MT_DEVICE},
-+{IO_ADDRESS(SL2312_USB1_BASE), __phys_to_pfn(SL2312_USB1_BASE), SZ_512K, MT_DEVICE},
-+{FLASH_VADDR(SL2312_FLASH_BASE), __phys_to_pfn(SL2312_FLASH_BASE), SZ_16M, MT_DEVICE},
-+};
-+
-+void __init sl2312_map_io(void)
-+{
-+ iotable_init(sl2312_io_desc, ARRAY_SIZE(sl2312_io_desc));
-+}
---- /dev/null
-+++ b/arch/arm/mach-sl2312/pci.c
-@@ -0,0 +1,359 @@
-+/*
-+ * linux/arch/arm/mach-sl2312/pci_sl2312.c
-+ *
-+ * PCI functions for sl2312 host PCI bridge
-+ *
-+ * Copyright (C) 2003 StorLink Corp.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#include <linux/sched.h>
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/ptrace.h>
-+#include <linux/slab.h>
-+#include <linux/ioport.h>
-+#include <linux/interrupt.h>
-+#include <linux/spinlock.h>
-+#include <linux/init.h>
-+
-+#include <asm/sizes.h>
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/system.h>
-+#include <asm/mach/pci.h>
-+#include <asm/mach/irq.h>
-+#include <asm/mach-types.h>
-+
-+#include <asm/arch/pci.h>
-+
-+//#define DEBUG
-+
-+// sl2312 PCI bridge access routines
-+
-+#define PCI_IOSIZE_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE)))
-+#define PCI_PROT_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x04))
-+#define PCI_CTRL_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x08))
-+#define PCI_SOFTRST_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x10))
-+#define PCI_CONFIG_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x28))
-+#define PCI_DATA_REG (*(volatile unsigned long *) (IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x2C))
-+
-+static spinlock_t sl2312_pci_lock = SPIN_LOCK_UNLOCKED;
-+// for initialize PCI devices
-+struct resource pci_ioport_resource = {
-+ .name = "PCI I/O Space",
-+ .start = IO_ADDRESS(SL2312_PCI_IO_BASE) + 0x100,
-+ .end = IO_ADDRESS(SL2312_PCI_IO_BASE) + SZ_512K - 1,
-+ .flags = IORESOURCE_IO,
-+};
-+struct resource pci_iomem_resource = {
-+ .name = "PCI Mem Space",
-+ .start = SL2312_PCI_MEM_BASE,
-+ .end = SL2312_PCI_MEM_BASE + SZ_128M - 1,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static int sl2312_read_config(struct pci_bus *bus, unsigned int devfn, int where,int size, u32 *val)
-+{
-+ unsigned long addr,data;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&sl2312_pci_lock, flags);
-+ addr = 0x80000000 | (PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | (where & ~3);
-+ PCI_CONFIG_REG = addr;
-+ data = PCI_DATA_REG;
-+
-+ switch (size) {
-+ case 1:
-+ *val = (u8) (data >> ((where & 0x03) * 8));
-+ break;
-+ case 2:
-+ *val = (u16) (data >> ((where & 0x02) * 8));
-+ break;
-+ case 4:
-+ *val = data;
-+ if ((where >= 0x10) && (where <= 0x24)) {
-+ if ((*val & 0xfff00000) == SL2312_PCI_IO_BASE) {
-+ *val &= 0x000fffff;
-+ *val |= IO_ADDRESS(SL2312_PCI_IO_BASE);
-+ }
-+ }
-+ break;
-+ }
-+ spin_unlock_irqrestore(&sl2312_pci_lock, flags);
-+// printk("READ==>slot=%d fn=%d where=%d value=%x\n",PCI_SLOT(devfn),PCI_FUNC(devfn),where,*val);
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int sl2312_write_config(struct pci_bus *bus, unsigned int devfn, int where,int size, u32 val)
-+{
-+ unsigned long addr,data;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&sl2312_pci_lock, flags);
-+ addr = 0x80000000 | (PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | (where & ~3);
-+ PCI_CONFIG_REG = addr;
-+ data = PCI_DATA_REG;
-+
-+ switch (size) {
-+ case 1:
-+ data &= ~(0xff << ((where & 0x03) * 8));
-+ data |= (val << ((where & 0x03) * 8));
-+ PCI_DATA_REG = data;
-+ break;
-+ case 2:
-+ data &= ~(0xffff << ((where & 0x02) * 8));
-+ data |= (val << ((where & 0x02) * 8));
-+ PCI_DATA_REG = data;
-+ break;
-+ case 4:
-+ if ((where >= 0x10) && (where <= 0x24)) {
-+ if ((val & 0xfff00000) == IO_ADDRESS(SL2312_PCI_IO_BASE)) {
-+ val &= 0x000fffff;
-+ val |= SL2312_PCI_IO_BASE;
-+ }
-+ }
-+ PCI_DATA_REG = val;
-+ break;
-+ }
-+ spin_unlock_irqrestore(&sl2312_pci_lock, flags);
-+
-+// printk("WRITE==> slot=%d fn=%d where=%d value=%x \n",PCI_SLOT(devfn),PCI_FUNC(devfn),where,val);
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static struct pci_ops sl2312_pci_ops = {
-+ .read = sl2312_read_config,
-+ .write = sl2312_write_config,
-+};
-+
-+
-+int __init sl2312_pci_setup_resources(struct resource **resource)
-+{
-+ PCI_IOSIZE_REG = 0; // 1M IO size
-+ PCI_CTRL_REG = 0x06;
-+
-+ resource[0] = &pci_ioport_resource;
-+ resource[1] = &pci_iomem_resource;
-+ resource[2] = NULL;
-+
-+ return 1;
-+}
-+
-+//static int sl2312_pci_fault(unsigned long addr, struct pt_regs *regs)
-+//{
-+// return 1;
-+//}
-+
-+
-+/**********************************************************************
-+ * MASK(disable) PCI interrupt
-+ * 0: PCI INTA, 1: PCI INTB, ... // for Linux interrupt routing
-+ * 16: PERR // for PCI module internal use
-+ * 17: SERR,.. respect to PCI CTRL2 REG
-+ **********************************************************************/
-+void sl2312_pci_mask_irq(unsigned int irq)
-+{
-+ struct pci_bus bus;
-+ unsigned int tmp;
-+
-+ bus.number = 0;
-+ sl2312_read_config(&bus, 0, SL2312_PCI_CTRL2, 4, &tmp);
-+ if (irq < 16) { // for linux int routing
-+ tmp &= ~(1 << (irq + 16 + 6));
-+ }
-+ else {
-+ tmp &= ~(1 << irq);
-+ }
-+ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp);
-+}
-+
-+/* UNMASK(enable) PCI interrupt */
-+void sl2312_pci_unmask_irq(unsigned int irq)
-+{
-+ struct pci_bus bus;
-+ unsigned int tmp;
-+
-+ bus.number = 0;
-+ sl2312_read_config(&bus, 0, SL2312_PCI_CTRL2, 4, &tmp);
-+ if (irq < 16) { // for linux int routing
-+ tmp |= (1 << (irq + 16 + 6));
-+ }
-+ else {
-+ tmp |= (1 << irq);
-+ }
-+ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp);
-+}
-+
-+/* Get PCI interrupt source */
-+int sl2312_pci_get_int_src(void)
-+{
-+ struct pci_bus bus;
-+ unsigned int tmp=0;
-+
-+ bus.number = 0;
-+ sl2312_read_config(&bus, 0, SL2312_PCI_CTRL2, 4, &tmp);
-+ if (tmp & (1 << 28)) { // PCI INTA
-+ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp);
-+ return IRQ_PCI_INTA;
-+ }
-+ if (tmp & (1 << 29)) { // PCI INTB
-+ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp);
-+ return IRQ_PCI_INTB;
-+ }
-+ if (tmp & (1 << 30)) { // PCI INTC
-+ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp);
-+ return IRQ_PCI_INTC;
-+ }
-+ if (tmp & (1 << 31)) { // PCI INTD
-+ sl2312_write_config(&bus, 0, SL2312_PCI_CTRL2, 4, tmp);
-+ return IRQ_PCI_INTD;
-+ }
-+ // otherwise, it should be a PCI error
-+ return IRQ_PCI;
-+}
-+
-+static irqreturn_t sl2312_pci_irq(int irq, void *devid)
-+{
-+ struct irq_desc *desc;
-+ struct irqaction *action;
-+ int retval = 0;
-+
-+ return 1;
-+
-+ irq = sl2312_pci_get_int_src();
-+ desc = &irq_desc[irq];
-+ action = desc->action;
-+ do {
-+ retval |= action->handler(irq, devid);
-+ action = action->next;
-+ } while (action);
-+
-+ return 1;
-+}
-+
-+//extern int (*external_fault)(unsigned long addr, struct pt_regs *regs);
-+
-+void __init sl2312_pci_preinit(void)
-+{
-+ struct pci_bus bus;
-+ unsigned long flags;
-+ unsigned int temp;
-+ int ret;
-+
-+ /*
-+ * Hook in our fault handler for PCI errors
-+ */
-+// external_fault = sl2312_pci_fault;
-+
-+ spin_lock_irqsave(&sl2312_pci_lock, flags);
-+
-+ /*
-+ * Grab the PCI interrupt.
-+ */
-+ ret = request_irq(IRQ_PCI, sl2312_pci_irq, 0, "sl2312 pci int", NULL);
-+ if (ret)
-+ printk(KERN_ERR "PCI: unable to grab PCI error "
-+ "interrupt: %d\n", ret);
-+
-+ spin_unlock_irqrestore(&sl2312_pci_lock, flags);
-+
-+ // setup pci bridge
-+ bus.number = 0; /* device 0, function 0 */
-+ temp = (SL2312_PCI_DMA_MEM1_BASE & 0xfff00000) | (SL2312_PCI_DMA_MEM1_SIZE << 16);
-+ sl2312_write_config(&bus, 0, SL2312_PCI_MEM1_BASE_SIZE, 4, temp);
-+}
-+
-+/*
-+ * No swizzle on SL2312
-+ */
-+static u8 __init sl2312_pci_swizzle(struct pci_dev *dev, u8 *pinp)
-+{
-+ return PCI_SLOT(dev->devfn);
-+}
-+
-+/*
-+ * map the specified device/slot/pin to an IRQ. This works out such
-+ * that slot 9 pin 1 is INT0, pin 2 is INT1, and slot 10 pin 1 is INT1.
-+ */
-+static int __init sl2312_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ int intnr = ((slot + (pin - 1)) & 3) + 4; /* the IRQ number of PCI bridge */
-+
-+ // printk("%s : slot = %d pin = %d \n",__func__,slot,pin);
-+ switch (slot)
-+ {
-+ case 12:
-+ if (pin==1)
-+ {
-+ intnr = 3;
-+ }
-+ else
-+ {
-+ intnr = 0;
-+ }
-+ break;
-+ case 11:
-+ intnr = (2 + (pin - 1)) & 3;
-+ break;
-+ case 10:
-+ intnr = (1 + (pin - 1)) & 3;
-+ break;
-+ case 9:
-+ intnr = (pin - 1) & 3;
-+ break;
-+ }
-+// if (slot == 10)
-+// intnr = (1 + (pin - 1)) & 3;
-+// else if (slot == 9)
-+// intnr = (pin - 1) & 3;
-+ return (IRQ_PCI_INTA + intnr);
-+}
-+
-+struct pci_bus * __init sl2312_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
-+{
-+ return (pci_scan_bus(0, &sl2312_pci_ops, sysdata));
-+
-+}
-+
-+int __init sl2312_pci_setup(int nr, struct pci_sys_data *sys)
-+{
-+ int ret = 0;
-+
-+ if (nr == 0) {
-+ ret = sl2312_pci_setup_resources(sys->resource);
-+ }
-+
-+ return ret;
-+}
-+
-+
-+struct hw_pci sl2312_pci __initdata = {
-+ .setup = sl2312_pci_setup,
-+ .preinit = sl2312_pci_preinit,
-+ .nr_controllers = 1,
-+ .swizzle = sl2312_pci_swizzle,
-+ .map_irq = sl2312_pci_map_irq,
-+ .scan = sl2312_pci_scan_bus,
-+};
-+
-+static int __init sl2312_pci_init(void)
-+{
-+ if (machine_is_sl2312())
-+ pci_common_init(&sl2312_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(sl2312_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-sl2312/sl2312-otg-1.c
-@@ -0,0 +1,64 @@
-+/*
-+ * linux/arch/arm/mach-pxa/sl2312.c
-+ *
-+ * Author: Nicolas Pitre
-+ * Created: Nov 05, 2002
-+ * Copyright: MontaVista Software Inc.
-+ *
-+ * Code specific to sl2312 aka Bulverde.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/pm.h>
-+#include <linux/device.h>
-+#include "asm/arch/sl2312.h"
-+#include "asm/arch/irqs.h"
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+#include <linux/platform_device.h>
-+
-+/*
-+ * device registration specific to sl2312.
-+ */
-+
-+static u64 sl2312_dmamask_1 = 0xffffffffUL;
-+
-+static struct resource sl2312_otg_resources_1[] = {
-+ [0] = {
-+ .start = 0x69000000,
-+ .end = 0x69000fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = IRQ_USB1,
-+ .end = IRQ_USB1,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device ehci_1_device = {
-+ .name = "ehci-hcd-FOTG2XX",
-+ .id = -1,
-+ .dev = {
-+ .dma_mask = &sl2312_dmamask_1,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+ .num_resources = ARRAY_SIZE(sl2312_otg_resources_1),
-+ .resource = sl2312_otg_resources_1,
-+};
-+
-+static struct platform_device *devices[] __initdata = {
-+ &ehci_1_device,
-+};
-+
-+static int __init sl2312_1_init(void)
-+{
-+ return platform_add_devices(devices, ARRAY_SIZE(devices));
-+}
-+
-+subsys_initcall(sl2312_1_init);
---- /dev/null
-+++ b/arch/arm/mach-sl2312/sl2312-otg.c
-@@ -0,0 +1,87 @@
-+/*
-+ * linux/arch/arm/mach-pxa/sl2312.c
-+ *
-+ * Author: Nicolas Pitre
-+ * Created: Nov 05, 2002
-+ * Copyright: MontaVista Software Inc.
-+ *
-+ * Code specific to sl2312 aka Bulverde.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/pm.h>
-+#include <linux/device.h>
-+#include "asm/arch/sl2312.h"
-+#include "asm/arch/irqs.h"
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+#include <linux/platform_device.h>
-+
-+/*
-+ * device registration specific to sl2312.
-+ */
-+
-+static u64 sl2312_dmamask = 0xffffffffUL;
-+
-+static struct resource sl2312_otg_resources_1[] = {
-+ [0] = {
-+ .start = 0x68000000,
-+ .end = 0x68000fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = IRQ_USB0,
-+ .end = IRQ_USB0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+static struct resource sl2312_otg_resources_2[] = {
-+ [2] = {
-+ .start = 0x69000000,
-+ .end = 0x69000fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [3] = {
-+ .start = IRQ_USB1,
-+ .end = IRQ_USB1,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device ehci_device_1 = {
-+ .name = "ehci-hcd-FOTG2XX",
-+ .id = 1,
-+ .dev = {
-+ .dma_mask = &sl2312_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+ .num_resources = ARRAY_SIZE(sl2312_otg_resources_1),
-+ .resource = sl2312_otg_resources_1,
-+};
-+
-+static struct platform_device ehci_device_2 = {
-+ .name = "ehci-hcd-FOTG2XX",
-+ .id = 2,
-+ .dev = {
-+ .dma_mask = &sl2312_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+ .num_resources = ARRAY_SIZE(sl2312_otg_resources_2),
-+ .resource = sl2312_otg_resources_2,
-+};
-+
-+static struct platform_device *devices[] __initdata = {
-+ &ehci_device_1, /* &ehci_device_2, */
-+};
-+
-+static int __init sl2312_init(void)
-+{
-+ return platform_add_devices(devices, ARRAY_SIZE(devices));
-+}
-+
-+subsys_initcall(sl2312_init);
---- /dev/null
-+++ b/arch/arm/mach-sl2312/sl3516_device.c
-@@ -0,0 +1,89 @@
-+/*
-+ * linux/arch/arm/mach-2312/sl3516_device.c
-+ *
-+ * Author: Nicolas Pitre
-+ * Created: Nov 05, 2002
-+ * Copyright: MontaVista Software Inc.
-+ *
-+ * Code specific to sl2312 aka Bulverde.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/pm.h>
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include "asm/arch/sl2312.h"
-+#include "asm/arch/irqs.h"
-+#include <asm/hardware.h>
-+#include <asm/irq.h>
-+
-+/*
-+ * device registration specific to sl2312.
-+ */
-+
-+static u64 sl3516_dmamask = 0xffffffffUL;
-+
-+static struct resource sl3516_sata_resources[] = {
-+ [0] = {
-+ .start = 0x63400000,
-+ .end = 0x63400040,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = IRQ_IDE1,
-+ .end = IRQ_IDE1,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device sata_device = {
-+ .name = "lepus-sata",
-+ .id = -1,
-+ .dev = {
-+ .dma_mask = &sl3516_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+ .num_resources = ARRAY_SIZE(sl3516_sata_resources),
-+ .resource = sl3516_sata_resources,
-+};
-+
-+static struct resource sl3516_sata0_resources[] = {
-+ [0] = {
-+ .start = 0x63000000,
-+ .end = 0x63000040,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = IRQ_IDE0,
-+ .end = IRQ_IDE0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device sata0_device = {
-+ .name = "lepus-sata0",
-+ .id = -1,
-+ .dev = {
-+ .dma_mask = &sl3516_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+ .num_resources = ARRAY_SIZE(sl3516_sata0_resources),
-+ .resource = sl3516_sata0_resources,
-+};
-+
-+static struct platform_device *sata_devices[] __initdata = {
-+ &sata_device,
-+ &sata0_device,
-+};
-+
-+static int __init sl3516_init(void)
-+{
-+ return platform_add_devices(sata_devices, ARRAY_SIZE(sata_devices));
-+}
-+
-+subsys_initcall(sl3516_init);
---- /dev/null
-+++ b/arch/arm/mach-sl2312/time.c
-@@ -0,0 +1,134 @@
-+/*
-+ * linux/include/asm-arm/arch-epxa10db/time.h
-+ *
-+ * Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <asm/io.h>
-+#include <asm/system.h>
-+#include <asm/leds.h>
-+#include <asm/arch/hardware.h>
-+#include <asm/mach/time.h>
-+#define TIMER_TYPE (volatile unsigned int*)
-+#include <asm/arch/timer.h>
-+// #define FIQ_PLUS 1
-+
-+
-+/*
-+ * IRQ handler for the timer
-+ */
-+static irqreturn_t sl2312_timer_interrupt(int irq, void *dev_id)
-+{
-+// unsigned int led;
-+ // ...clear the interrupt
-+#ifdef FIQ_PLUS
-+ *((volatile unsigned int *)FIQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER1_MASK);
-+#else
-+ *((volatile unsigned int *)IRQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER2_MASK);
-+#endif
-+
-+#if 0
-+ if(!(jiffies % HZ))
-+ {
-+ led = jiffies / HZ;
-+// printk("ticks %x \n", led);
-+ }
-+ do_leds();
-+ do_timer(regs);
-+ do_profile(regs);
-+#endif
-+ timer_tick();
-+ return IRQ_HANDLED;
-+}
-+
-+static struct irqaction sl2312_timer_irq = {
-+ .name = "SL2312 Timer Tick",
-+ .flags = IRQF_DISABLED | IRQF_TIMER,
-+ .handler = sl2312_timer_interrupt,
-+};
-+
-+unsigned long sl2312_gettimeoffset (void)
-+{
-+ return 0L;
-+}
-+
-+/*
-+ * Set up timer interrupt, and return the current time in seconds.
-+ */
-+void __init sl2312_time_init(void)
-+{
-+ // For clock rate adjusting
-+ unsigned int tick_rate=0;
-+
-+#ifdef CONFIG_SL3516_ASIC
-+ unsigned int clock_rate_base = 130000000;
-+ unsigned int reg_v=0;
-+
-+ //--> Add by jason for clock adjust
-+ reg_v = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_STATUS)));
-+ reg_v >>= 15;
-+ tick_rate = (clock_rate_base + (reg_v & 0x07)*10000000);
-+
-+ // FPGA use AHB bus tick rate
-+ printk("Bus: %dMHz",tick_rate/1000000);
-+
-+ tick_rate /= 6; // APB bus run AHB*(1/6)
-+
-+ switch((reg_v>>3)&3){
-+ case 0: printk("(1/1)\n") ;
-+ break;
-+ case 1: printk("(3/2)\n") ;
-+ break;
-+ case 2: printk("(24/13)\n") ;
-+ break;
-+ case 3: printk("(2/1)\n") ;
-+ break;
-+ }
-+ //<--
-+#else
-+ printk("Bus: %dMHz(1/1)\n",CLOCK_TICK_RATE/1000000); // FPGA use 20MHz
-+ tick_rate = CLOCK_TICK_RATE;
-+#endif
-+
-+
-+ /*
-+ * Make irqs happen for the system timer
-+ */
-+ // initialize timer interrupt
-+ // low active and edge trigger
-+#ifdef FIQ_PLUS
-+ *((volatile unsigned int *)FIQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER1_MASK);
-+ *((volatile unsigned int *)FIQ_LEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER1_MASK);
-+ setup_irq(IRQ_TIMER1, &sl2312_timer_irq);
-+ /* Start the timer */
-+ *TIMER_COUNT(IO_ADDRESS(SL2312_TIMER1_BASE))=(unsigned int)(tick_rate/HZ);
-+ *TIMER_LOAD(IO_ADDRESS(SL2312_TIMER1_BASE))=(unsigned int)(tick_rate/HZ);
-+ *TIMER_CR(IO_ADDRESS(SL2312_TIMER1_BASE))=(unsigned int)(TIMER_1_CR_ENABLE_MSK|TIMER_1_CR_INT_MSK);
-+#else
-+ *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER2_MASK);
-+ *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_TIMER2_MASK);
-+ setup_irq(IRQ_TIMER2, &sl2312_timer_irq);
-+ /* Start the timer */
-+ *TIMER_COUNT(IO_ADDRESS(SL2312_TIMER2_BASE))=(unsigned int)(tick_rate/HZ);
-+ *TIMER_LOAD(IO_ADDRESS(SL2312_TIMER2_BASE))=(unsigned int)(tick_rate/HZ);
-+ *TIMER_CR(IO_ADDRESS(SL2312_TIMER1_BASE))=(unsigned int)(TIMER_2_CR_ENABLE_MSK|TIMER_2_CR_INT_MSK);
-+#endif
-+
-+}
-+
-+
---- /dev/null
-+++ b/arch/arm/mach-sl2312/xor.c
-@@ -0,0 +1,1200 @@
-+/*
-+ * arch/arm/mach-sl2312/xor.c
-+ *
-+ * Support functions for the Gemini Soc. This is
-+ * a HW XOR unit that is specifically designed for use with RAID5
-+ * applications. This driver provides an interface that is used by
-+ * the Linux RAID stack.
-+ *
-+ * Original Author: Jason Lee<jason@storlink.com.tw>
-+ *
-+ * Contributors:Sanders<sanders@storlink.com.tw>
-+ Jason Lee<jason@storlink.com.tw>
-+ *
-+ *
-+ * Maintainer: Jason Lee<jason@storlink.com.tw>
-+ *
-+ * Copyright (C) 2005 Storlink Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ *
-+ * History: (06/25/2005, DJ) Initial Creation
-+ *
-+ * Versing 1.0.0 Initial version
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/sched.h>
-+#include <linux/spinlock.h>
-+#include <linux/slab.h>
-+#include <linux/errno.h>
-+#include <linux/interrupt.h>
-+#include <linux/sched.h>
-+#include <linux/wait.h>
-+#include <linux/list.h>
-+#include <linux/pci.h>
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/mm.h>
-+#include <asm/irq.h>
-+#include <asm/delay.h>
-+#include <asm/uaccess.h>
-+#include <asm/cacheflush.h>
-+#include <asm/hardware.h>
-+#include <asm/arch/xor.h>
-+#include <asm/pci.h>
-+#include <linux/version.h>
-+
-+/*
-+ * pick up local definitions
-+ */
-+#define XOR_SW_FILL_IN
-+#include "hw_xor.h"
-+
-+
-+//#define XOR_DEBUG
-+//#define XOR_TEST 1
-+#ifdef XOR_TEST
-+#define TEST_ITERATION 1000
-+#define SPIN_WAIT 1
-+#endif
-+#ifdef XOR_DEBUG
-+#define DPRINTK(s, args...) printk("Gemini XOR: " s "\n", ## args)
-+#define DENTER() DPRINTK("Entered...\n");
-+#define DEXIT() DPRINTK("Exited...\n");
-+#else
-+#define DPRINTK(s, args...)
-+#define DENTER()
-+#define DEXIT()
-+#endif
-+
-+//#define SPIN_WAIT
-+
-+/* globals */
-+static RAID_T tp;
-+static RAID_TXDMA_CTRL_T txdma_ctrl;
-+RAID_RXDMA_CTRL_T rxdma_ctrl;
-+
-+//#ifndef SPIN_WAIT
-+static spinlock_t raid_lock;
-+//#endif
-+
-+static unsigned int tx_desc_virtual_base;
-+static unsigned int rx_desc_virtual_base;
-+RAID_DESCRIPTOR_T *tx_desc_ptr;
-+RAID_DESCRIPTOR_T *rx_desc_ptr;
-+
-+/* static prototypes */
-+#define DMA_MALLOC(size,handle) pci_alloc_consistent(NULL,size,handle)
-+#define DMA_MFREE(mem,size,handle) pci_free_consistent(NULL,size,mem,handle)
-+
-+static int gemini_xor_init_desc(void);
-+
-+static unsigned int raid_read_reg(unsigned int offset)
-+{
-+ unsigned int reg_val;
-+
-+ reg_val = readl(RAID_BASE_ADDR + offset);
-+ return (reg_val);
-+}
-+
-+static void raid_write_reg(unsigned int offset,unsigned int data,unsigned int bit_mask)
-+{
-+ unsigned int reg_val;
-+ unsigned int *addr;
-+
-+ reg_val = ( raid_read_reg(offset) & (~bit_mask) ) | (data & bit_mask);
-+ addr = (unsigned int *)(RAID_BASE_ADDR + offset);
-+ writel(reg_val,addr);
-+ return;
-+}
-+
-+#ifndef SPIN_WAIT
-+__inline__ void xor_queue_descriptor(void)
-+{
-+ unsigned int flags,status=1;
-+
-+ DPRINTK("Going to sleep");
-+
-+ while(status){
-+ yield();
-+ //schedule();
-+ spin_lock_irqsave(&raid_lock,flags);
-+ status = tp.busy;
-+ spin_unlock_irqrestore(&raid_lock, flags);
-+ }
-+// tp.status = COMPLETE;
-+ DPRINTK("woken up!");
-+
-+}
-+#endif
-+
-+#ifdef SPIN_WAIT
-+static void gemini_xor_isr(int d_n)
-+#else
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,28)
-+static void gemini_xor_isr(int irq, void *dev_id, struct pt_regs *regs)
-+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-+static irqreturn_t gemini_xor_isr(int irq, void *dev_instance, struct pt_regs *regs)
-+#endif
-+#endif
-+{
-+
-+ unsigned int err;
-+ RAID_DMA_STATUS_T dma_status;
-+// RAID_DESCRIPTOR_T *rdesc,*tdesc;
-+// unsigned int *paddr;
-+
-+ dma_status.bits32 = raid_read_reg(RAID_DMA_STATUS);
-+#ifdef SPIN_WAIT
-+ while( (dma_status.bits32& (1<<31) ) ==0 ){
-+ udelay(1);
-+ dma_status.bits32 = raid_read_reg(RAID_DMA_STATUS);
-+ }
-+
-+/* tdesc = tp.tx_first_desc;
-+ rdesc = tp.rx_first_desc;
-+ for(d_n;d_n>0;d_n--){
-+ if( tdesc->func_ctrl.bits.own == DMA ){
-+ paddr = tdesc;
-+ printk("error tx desc:0x%x\n",*paddr++);
-+ printk("error tx desc:0x%x\n",*paddr++);
-+ printk("error tx desc:0s%x\n",*paddr++);
-+ printk("error tx desc:0x%x\n",*paddr);
-+ while(1);
-+ }
-+ tdesc = (RAID_DESCRIPTOR_T *)((tdesc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
-+ }
-+
-+ if( rdesc->func_ctrl.bits.own == DMA ){
-+ paddr = rdesc;
-+ printk("error rx desc:0x%x\n",*paddr++);
-+ printk("error rx desc:0x%x\n",*paddr++);
-+ printk("error rx desc:0s%x\n",*paddr++);
-+ printk("error rx desc:0x%x\n",*paddr);
-+ while(1);
-+ }
-+*/
-+#endif
-+
-+ if(dma_status.bits32 & ((1<<31)|(1<<26))){
-+ // if no bug , we can turn off rx finish interrupt
-+ dma_status.bits32 = raid_read_reg(RAID_DMA_STATUS);
-+ err = raid_read_reg(RAID_DMA_DEVICE_ID);
-+ tp.busy = 0;
-+
-+ if(err&0x00FF0000){
-+ tp.status = ERROR;
-+ printk("XOR:<HW>%s error code %x\n",(err&0x00F00000)?"tx":"rx",err);
-+
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,28)
-+ return ;
-+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-+#ifndef SPIN_WAIT
-+ return IRQ_RETVAL(IRQ_HANDLED);
-+#endif
-+#endif
-+ }
-+ // 16~19 rx error code
-+ // 20~23 tx error codd
-+
-+ dma_status.bits.tsFinishI = 1;
-+ dma_status.bits.rsFinishI = 1;
-+ raid_write_reg(RAID_DMA_STATUS, dma_status.bits32,0x84000000); // clear INT
-+
-+// printk("xor %d\n",d_n);
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,28)
-+ return ;
-+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-+#ifndef SPIN_WAIT
-+ return IRQ_RETVAL(IRQ_HANDLED);
-+#endif
-+#endif
-+ }
-+
-+ #if LINUX_VERSION_CODE <= KERNEL_VERSION(2,4,28)
-+ return ;
-+ #elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
-+ #ifndef SPIN_WAIT
-+ printk("XOR: DMA status register(0x%8x)\n",dma_status.bits32);
-+ return IRQ_RETVAL(IRQ_HANDLED);
-+ #endif
-+ #endif
-+}
-+
-+void
-+xor_gemini_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
-+{
-+ int status=0;
-+ unsigned int flags;
-+
-+ if(bytes > (1<<(SRAM_PAR_SIZE+11))){
-+ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes);
-+ }
-+
-+ spin_lock_irqsave(&raid_lock,flags);
-+ while(tp.status != COMPLETE){
-+ spin_unlock_irqrestore(&raid_lock, flags);
-+ //printk("XOR yield2\n");
-+#ifdef XOR_SW_FILL_IN
-+ xor_arm4regs_2(bytes,p1,p2);
-+ return ;
-+#else
-+ yield();
-+#endif
-+ }
-+ spin_unlock_irqrestore(&raid_lock, flags);
-+ tp.status = RUNNING;
-+
-+ // flush the cache to memory before H/W XOR touches them
-+ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL);
-+ consistent_sync(p2, bytes, DMA_TO_DEVICE);
-+
-+
-+ tp.tx_desc = tp.tx_first_desc;
-+ tp.rx_desc = tp.rx_first_desc;
-+ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){
-+ // prepare tx descript
-+ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xffffffff);
-+ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address
-+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
-+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 2; // first descript
-+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
-+ tp.tx_desc->flg_status.bits32 = 0x00020000;
-+ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
-+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
-+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
-+ wmb();
-+ tp.tx_desc = tp.tx_cur_desc;
-+ tp.tx_desc->buf_addr = (unsigned int)__pa(p2); // pysical address
-+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
-+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 1; // last descript
-+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
-+ tp.tx_desc->flg_status.bits32 = 0x00010000;
-+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
-+ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
-+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); // keep last descript
-+
-+ wmb();
-+ // prepare rx descript
-+ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFf);
-+ tp.rx_desc->buf_addr = (unsigned int)__pa(p1);
-+ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
-+ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR
-+// tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
-+ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
-+ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
-+
-+ }
-+ else{
-+ /* no free tx descriptor */
-+ printk("XOR:no free tx descript");
-+ return ;
-+ }
-+
-+ // change status
-+// tp.status = RUNNING;
-+ status = tp.busy = 1;
-+
-+ // start tx DMA
-+ rxdma_ctrl.bits.rd_start = 1;
-+ // start rx DMA
-+ txdma_ctrl.bits.td_start = 1;
-+
-+ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000);
-+ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000);
-+
-+#ifdef SPIN_WAIT
-+ gemini_xor_isr(2);
-+#else
-+ xor_queue_descriptor();
-+#endif
-+
-+ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*2) ;
-+ tp.status = COMPLETE;
-+// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ;
-+// tp.rx_desc = tp.rx_first_desc ;
-+// tp.rx_desc->func_ctrl.bits.own = DMA;
-+
-+}
-+
-+void
-+xor_gemini_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-+ unsigned long *p3)
-+{
-+ int status=0;
-+ unsigned int flags;
-+
-+ if(bytes > (1<<(SRAM_PAR_SIZE+11))){
-+ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes);
-+ }
-+
-+ spin_lock_irqsave(&raid_lock,flags);
-+ if(tp.status != COMPLETE){
-+ spin_unlock_irqrestore(&raid_lock, flags);
-+ //printk("XOR yield3\n");
-+#ifdef XOR_SW_FILL_IN
-+ xor_arm4regs_3(bytes,p1,p2,p3);
-+ return;
-+#else
-+ yield();
-+#endif
-+ }
-+ spin_unlock_irqrestore(&raid_lock, flags);
-+ tp.status = RUNNING;
-+
-+ // flush the cache to memory before H/W XOR touches them
-+ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL);
-+ consistent_sync(p2, bytes, DMA_TO_DEVICE);
-+ consistent_sync(p3, bytes, DMA_TO_DEVICE);
-+
-+ tp.tx_desc = tp.tx_first_desc;
-+ tp.rx_desc = tp.rx_first_desc;
-+ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){
-+ // prepare tx descript
-+ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xffffffff);
-+ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address
-+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
-+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 2; // first descript
-+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
-+ tp.tx_desc->flg_status.bits32 = 0x00020000;
-+ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
-+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
-+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
-+
-+ tp.tx_desc = tp.tx_cur_desc;
-+ tp.tx_desc->buf_addr = (unsigned int)__pa(p2); // pysical address
-+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
-+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript
-+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
-+ tp.tx_desc->flg_status.bits32 = 0x0000000;
-+ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
-+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
-+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
-+
-+ tp.tx_desc = tp.tx_cur_desc;
-+ tp.tx_desc->buf_addr = (unsigned int)__pa(p3); // pysical address
-+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
-+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 1; // last descript
-+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
-+ tp.tx_desc->flg_status.bits32 = 0x00010000;
-+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
-+ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
-+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); // keep last descript
-+
-+ // prepare rx descript
-+ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFf);
-+ tp.rx_desc->buf_addr = (unsigned int)__pa(p1);
-+ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
-+ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR
-+// tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
-+ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
-+ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
-+
-+ }
-+ else{
-+ /* no free tx descriptor */
-+ printk("XOR:no free tx descript \n");
-+ return ;
-+ }
-+
-+ // change status
-+// tp.status = RUNNING;
-+ status = tp.busy = 1;
-+
-+ // start tx DMA
-+ rxdma_ctrl.bits.rd_start = 1;
-+ // start rx DMA
-+ txdma_ctrl.bits.td_start = 1;
-+ wmb();
-+ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000);
-+ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000);
-+
-+#ifdef SPIN_WAIT
-+ gemini_xor_isr(3);
-+#else
-+ xor_queue_descriptor();
-+#endif
-+ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*3) | 0x0B;
-+ tp.status = COMPLETE;
-+// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) | 0x0B;
-+ //tp.rx_desc = tp.rx_first_desc ;
-+// tp.rx_desc->func_ctrl.bits.own = DMA;
-+
-+}
-+
-+void
-+xor_gemini_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-+ unsigned long *p3, unsigned long *p4)
-+{
-+ int status=0;
-+ unsigned int flags;
-+
-+ if(bytes > (1<<(SRAM_PAR_SIZE+11))){
-+ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes);
-+ }
-+
-+ spin_lock_irqsave(&raid_lock,flags);
-+ if(tp.status != COMPLETE){
-+ spin_unlock_irqrestore(&raid_lock, flags);
-+ //printk("S\n");
-+#ifdef XOR_SW_FILL_IN
-+ xor_arm4regs_4(bytes,p1,p2,p3,p4);
-+ return;
-+#else
-+ msleep(1);
-+ yield();
-+#endif
-+ }
-+ spin_unlock_irqrestore(&raid_lock, flags);
-+
-+ tp.status = RUNNING;
-+
-+ // flush the cache to memory before H/W XOR touches them
-+ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL);
-+ consistent_sync(p2, bytes, DMA_TO_DEVICE);
-+ consistent_sync(p3, bytes, DMA_TO_DEVICE);
-+ consistent_sync(p4, bytes, DMA_TO_DEVICE);
-+
-+ tp.tx_desc = tp.tx_first_desc;
-+ tp.rx_desc = tp.rx_first_desc;
-+ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){
-+ // prepare tx descript
-+ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xffffffff);
-+ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address
-+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
-+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 2; // first descript
-+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
-+ tp.tx_desc->flg_status.bits32 = 0x00020000;
-+ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
-+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
-+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
-+
-+ tp.tx_desc = tp.tx_cur_desc;
-+ tp.tx_cur_desc->buf_addr = (unsigned int)__pa(p2); // pysical address
-+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
-+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript
-+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
-+ tp.tx_desc->flg_status.bits32 = 0x00000000;
-+ tp.tx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
-+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
-+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
-+
-+ tp.tx_desc = tp.tx_cur_desc;
-+ tp.tx_desc->buf_addr = (unsigned int)__pa(p3); // pysical address
-+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
-+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript
-+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
-+ tp.tx_desc->flg_status.bits32 = 0x00000000;
-+ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
-+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
-+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
-+
-+
-+ tp.tx_desc = tp.tx_cur_desc;
-+ tp.tx_desc->buf_addr = (unsigned int)__pa(p4); // pysical address
-+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
-+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 1; // last descript
-+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
-+ tp.tx_desc->flg_status.bits32 = 0x00010000;
-+// tp.tx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
-+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
-+ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
-+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base); // keep last descript
-+
-+ // prepare rx descript
-+ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFF);
-+ tp.rx_desc->buf_addr = (unsigned int)__pa(p1);
-+ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
-+ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR
-+// tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
-+ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
-+ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
-+
-+ }
-+ else{
-+ /* no free tx descriptor */
-+ printk("XOR:no free tx descript");
-+ return ;
-+ }
-+
-+ // change status
-+// tp.status = RUNNING;
-+ status = tp.busy = 1;
-+
-+ // start tx DMA
-+ rxdma_ctrl.bits.rd_start = 1;
-+ // start rx DMA
-+ txdma_ctrl.bits.td_start = 1;
-+ wmb();
-+ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000);
-+ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000);
-+
-+#ifdef SPIN_WAIT
-+ gemini_xor_isr(4);
-+#else
-+ xor_queue_descriptor();
-+#endif
-+
-+ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*4) | 0x0B;
-+ tp.status = COMPLETE;
-+// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) | 0x0B;
-+ //tp.rx_desc = tp.rx_first_desc ;
-+// tp.rx_desc->func_ctrl.bits.own = DMA;
-+
-+}
-+
-+void
-+xor_gemini_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-+ unsigned long *p3, unsigned long *p4, unsigned long *p5)
-+{
-+
-+ int status=0;
-+ unsigned int flags;
-+
-+
-+ if(bytes > (1<<(SRAM_PAR_SIZE+11))){
-+ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes);
-+ }
-+
-+ spin_lock_irqsave(&raid_lock,flags);
-+ while(tp.status != COMPLETE){
-+ spin_unlock_irqrestore(&raid_lock, flags);
-+ //printk("XOR yield5\n");
-+#ifdef XOR_SW_FILL_IN
-+ xor_arm4regs_5(bytes,p1,p2,p3,p4,p5);
-+ return;
-+#else
-+ msleep(1);
-+ yield();
-+#endif
-+ }
-+ spin_unlock_irqrestore(&raid_lock, flags);
-+ tp.status = RUNNING;
-+
-+ // flush the cache to memory before H/W XOR touches them
-+ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL);
-+ consistent_sync(p2, bytes, DMA_TO_DEVICE);
-+ consistent_sync(p3, bytes, DMA_TO_DEVICE);
-+ consistent_sync(p4, bytes, DMA_TO_DEVICE);
-+ consistent_sync(p5, bytes, DMA_TO_DEVICE);
-+
-+ tp.tx_desc = tp.tx_first_desc;
-+ tp.rx_desc = tp.rx_first_desc;
-+ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){
-+ // prepare tx descript
-+ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xffffffff);
-+ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address
-+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
-+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 2; // first descript
-+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
-+ tp.tx_desc->flg_status.bits32 = 0x00020000;
-+ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
-+ wmb();
-+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
-+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
-+
-+ tp.tx_desc = tp.tx_cur_desc;
-+ tp.tx_desc->buf_addr = (unsigned int)__pa(p2); // pysical address
-+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
-+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript
-+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
-+ tp.tx_desc->flg_status.bits32 = 0x00000000;
-+ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
-+ wmb();
-+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
-+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
-+
-+ tp.tx_desc = tp.tx_cur_desc;
-+ tp.tx_desc->buf_addr = (unsigned int)__pa(p3); // pysical address
-+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
-+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript
-+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
-+ tp.tx_desc->flg_status.bits32 = 0x00000000;
-+ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
-+ wmb();
-+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
-+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
-+
-+ tp.tx_desc = tp.tx_cur_desc;
-+ tp.tx_desc->buf_addr = (unsigned int)__pa(p4); // pysical address
-+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
-+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 0; // first descript
-+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
-+ tp.tx_desc->flg_status.bits32 = 0x00000000;
-+ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
-+ wmb();
-+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
-+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
-+
-+
-+ tp.tx_desc = tp.tx_cur_desc;
-+ tp.tx_desc->buf_addr = (unsigned int)__pa(p5); // pysical address
-+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
-+// tp.tx_desc->flg_status.bits_cmd_status.bcc = 1; // last descript
-+// tp.tx_desc->flg_status.bits_cmd_status.mode = 0; // only support XOR command
-+// tp.tx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
-+ tp.tx_desc->flg_status.bits32 = 0x00010000;
-+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
-+ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
-+ tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xfffffff0)+tx_desc_virtual_base);
-+ tp.tx_finished_desc = tp.tx_desc; // keep last descript
-+
-+ // prepare rx descript
-+ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFF);
-+ tp.rx_desc->buf_addr = (unsigned int)__pa(p1);
-+ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
-+ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR
-+// tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
-+ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
-+ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
-+
-+ }
-+ else{
-+ /* no free tx descriptor */
-+ printk("XOR:no free tx descript");
-+ return ;
-+ }
-+
-+ // change status
-+// tp.status = RUNNING;
-+ status = tp.busy = 1;
-+
-+ // start tx DMA
-+ rxdma_ctrl.bits.rd_start = 1;
-+ // start rx DMA
-+ txdma_ctrl.bits.td_start = 1;
-+ wmb();
-+ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000);
-+ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000);
-+
-+#ifdef SPIN_WAIT
-+ gemini_xor_isr(5);
-+#else
-+ xor_queue_descriptor();
-+#endif
-+
-+ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*5) | 0x0B;
-+ tp.status = COMPLETE;
-+// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) | 0x0B;
-+ //tp.rx_desc = tp.rx_first_desc ;
-+// tp.rx_desc->func_ctrl.bits.own = DMA;
-+
-+}
-+
-+#ifdef XOR_TEST
-+void
-+raid_memset(unsigned int *p1, unsigned int pattern, unsigned int bytes)
-+{
-+ int status=0,i;
-+
-+ if(bytes > (1<<(SRAM_PAR_SIZE+11))){
-+ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes);
-+ }
-+
-+ *p1 = pattern;
-+
-+ // flush the cache to memory before H/W XOR touches them
-+ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL);
-+
-+ while(tp.status != COMPLETE){
-+ DPRINTK("XOR yield\n");
-+ //schedule();
-+ yield();
-+ }
-+ tp.status = RUNNING;
-+
-+ tp.tx_desc = tp.tx_first_desc;
-+ tp.rx_desc = tp.rx_first_desc;
-+ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){
-+ // prepare tx descript
-+ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xFFFFFFFF);
-+ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address
-+ tp.tx_desc->func_ctrl.bits.buffer_size = 4; /* total frame byte count */
-+ tp.tx_desc->flg_status.bits_cmd_status.bcc = bytes; // bytes to fill
-+ tp.tx_desc->flg_status.bits_cmd_status.mode = CMD_FILL; // only support memory FILL command
-+ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
-+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
-+ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;
-+// tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xFFFFFFF0)+tx_desc_virtual_base);
-+
-+ // prepare rx descript
-+ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFF);
-+ tp.rx_desc->buf_addr = (unsigned int)__pa(p1);
-+ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
-+ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR
-+ tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
-+ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
-+// tp.rx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.rx_cur_desc->next_desc_addr.bits32 & 0xfffffff0)+rx_desc_virtual_base);
-+ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
-+ tp.rx_finished_desc = tp.rx_desc;
-+
-+ }
-+ else{
-+ /* no free tx descriptor */
-+ printk("XOR:no free tx descript");
-+ return ;
-+ }
-+
-+ // change status
-+ //tp.status = RUNNING;
-+ status = tp.busy = 1;
-+
-+ // start tx DMA
-+ rxdma_ctrl.bits.rd_start = 1;
-+ // start rx DMA
-+ txdma_ctrl.bits.td_start = 1;
-+
-+ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000);
-+ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000);
-+
-+#ifdef SPIN_WAIT
-+ gemini_xor_isr(2);
-+#else
-+ xor_queue_descriptor();
-+#endif
-+
-+ for(i=1; i<(bytes/sizeof(int)); i++) {
-+ if(p1[0]!=p1[i]){
-+ printk("pattern set error!\n");
-+ while(1);
-+ }
-+ }
-+
-+ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ;
-+ tp.status = COMPLETE;
-+// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ;
-+ //tp.rx_desc = tp.rx_first_desc ;
-+// tp.rx_desc->func_ctrl.bits.own = DMA;
-+
-+}
-+#endif
-+
-+void
-+raid_memcpy(unsigned int *to, unsigned int *from, unsigned int bytes)
-+{
-+ int status=0,i;
-+
-+ if(bytes > (1<<(SRAM_PAR_SIZE+11))){
-+ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes);
-+ }
-+
-+ // flush the cache to memory before H/W XOR touches them
-+ consistent_sync(to, bytes, DMA_BIDIRECTIONAL);
-+ consistent_sync(from,bytes, DMA_TO_DEVICE);
-+
-+ while(tp.status != COMPLETE){
-+ DPRINTK("XOR yield\n");
-+ //schedule();
-+ yield();
-+ }
-+ tp.status = RUNNING;
-+
-+ tp.tx_desc = tp.tx_first_desc;
-+ tp.rx_desc = tp.rx_first_desc;
-+ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){
-+ // prepare tx descript
-+ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xFFFFFFFF);
-+ tp.tx_desc->buf_addr = (unsigned int)__pa(from); // physical address
-+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
-+ tp.tx_desc->flg_status.bits32 = CMD_CPY; // only support memory FILL command
-+ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
-+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
-+ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;
-+// tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xFFFFFFF0)+tx_desc_virtual_base);
-+
-+ // prepare rx descript
-+ raid_write_reg(RAID_STRDMA_CURR_DESC,(unsigned int)tp.rx_desc-rx_desc_virtual_base,0xFFFFFFFF);
-+ tp.rx_desc->buf_addr = (unsigned int)__pa(to);
-+ tp.rx_desc->func_ctrl.bits.buffer_size = bytes; /* total frame byte count */
-+ tp.rx_desc->flg_status.bits32 = 0; // link data from XOR
-+ tp.rx_cur_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
-+ tp.rx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
-+// tp.rx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.rx_cur_desc->next_desc_addr.bits32 & 0xfffffff0)+rx_desc_virtual_base);
-+ tp.rx_desc->next_desc_addr.bits32 = 0x0000000b;// end of descript
-+
-+ }
-+ else{
-+ /* no free tx descriptor */
-+ printk("XOR:no free tx descript");
-+ return ;
-+ }
-+
-+ // change status
-+ //tp.status = RUNNING;
-+ status = tp.busy = 1;
-+
-+ // start tx DMA
-+ rxdma_ctrl.bits.rd_start = 1;
-+ // start rx DMA
-+ txdma_ctrl.bits.td_start = 1;
-+
-+ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000);
-+ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000);
-+
-+#ifdef SPIN_WAIT
-+ gemini_xor_isr(2);
-+#else
-+ xor_queue_descriptor();
-+#endif
-+
-+#ifdef XOR_TEST
-+ for(i=1; i<(bytes/sizeof(int)); i++) {
-+ if(to[i]!=from[i]){
-+ printk("pattern check error!\n");
-+ printk("offset=0x%x p1=%x p2=%x\n",i*4,to[i],from[i]);
-+ while(1);
-+ }
-+ }
-+#endif
-+
-+ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ;
-+ tp.status = COMPLETE;
-+// tp.rx_desc->next_desc_addr.bits32 = ((unsigned long)tp.rx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ;
-+ //tp.rx_desc = tp.rx_first_desc ;
-+// tp.rx_desc->func_ctrl.bits.own = DMA;
-+
-+}
-+EXPORT_SYMBOL(raid_memcpy);
-+
-+#ifdef XOR_TEST
-+int
-+raid_memchk(unsigned int *p1, unsigned int pattern, unsigned int bytes)
-+{
-+ int status=0;
-+ RAID_DMA_STATUS_T dma_status;
-+
-+ if(bytes > (1<<(SRAM_PAR_SIZE+11))){
-+ printk("XOR: out of SRAM partition!![0x%x]\n",(unsigned int)bytes);
-+ }
-+
-+ status = ((pattern&0xFFFF)%bytes )/4;
-+ p1[status] = pattern;
-+
-+ while(tp.status != COMPLETE){
-+ DPRINTK("XOR yield\n");
-+ //schedule();
-+ yield();
-+ }
-+ tp.status = RUNNING;
-+
-+ // flush the cache to memory before H/W XOR touches them
-+ consistent_sync(p1, bytes, DMA_BIDIRECTIONAL);
-+
-+ tp.tx_desc = tp.tx_first_desc;
-+ if((tp.tx_desc->func_ctrl.bits.own == CPU)/*&&(tp.rx_desc->func_ctrl.bits.own == DMA)*/){
-+ // prepare tx descript
-+ raid_write_reg(RAID_FCHDMA_CURR_DESC,(unsigned int)tp.tx_desc-tx_desc_virtual_base,0xFFFFFFFF);
-+ tp.tx_desc->buf_addr = (unsigned int)__pa(p1); // physical address
-+ tp.tx_desc->func_ctrl.bits.raid_ctrl_status = 0;
-+ tp.tx_desc->func_ctrl.bits.buffer_size = bytes ; /* total frame byte count */
-+ tp.tx_desc->flg_status.bits32 = CMD_CHK; // only support memory FILL command
-+ tp.tx_desc->next_desc_addr.bits.sof_eof = 0x03; /*only one descriptor*/
-+ tp.tx_desc->func_ctrl.bits.own = DMA; /* set owner bit */
-+ tp.tx_desc->next_desc_addr.bits32 = 0x0000000b;
-+// tp.tx_cur_desc = (RAID_DESCRIPTOR_T *)((tp.tx_desc->next_desc_addr.bits32 & 0xFFFFFFF0)+tx_desc_virtual_base);
-+
-+ }
-+ else{
-+ /* no free tx descriptor */
-+ printk("XOR:no free tx descript");
-+ return -1;
-+ }
-+
-+ // change status
-+ //tp.status = RUNNING;
-+ status = tp.busy = 1;
-+
-+ // start tx DMA
-+ txdma_ctrl.bits.td_start = 1;
-+
-+ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0x80000000);
-+// raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0x80000000);
-+
-+#ifdef SPIN_WAIT
-+ gemini_xor_isr(2);
-+#else
-+ xor_queue_descriptor();
-+#endif
-+
-+// dma_status.bits32 = raid_read_reg(RAID_DMA_STATUS);
-+// if (dma_status.bits32 & (1<<15)) {
-+
-+ if((tp.tx_first_desc->func_ctrl.bits.raid_ctrl_status & 0x2)) {
-+ status = 1;
-+// raid_write_reg(RAID_DMA_STATUS,0x00008000,0x00080000);
-+ }
-+ else{
-+ status = 0;
-+ }
-+
-+ tp.tx_desc->next_desc_addr.bits32 = ((unsigned long)tp.tx_first_desc - tx_desc_virtual_base + sizeof(RAID_DESCRIPTOR_T)*1) ;
-+ tp.status = COMPLETE;
-+// tp.rx_desc->func_ctrl.bits.own = DMA;
-+ return status ;
-+}
-+#endif
-+
-+int __init gemini_xor_init(void)
-+{
-+ unsigned int res;
-+ unsigned int *paddr1,*paddr2,*paddr3,i;
-+ unsigned volatile char *charact;
-+ unsigned volatile short *two_char;
-+ unsigned volatile int *four_char;
-+
-+ // init descript
-+ res = gemini_xor_init_desc();
-+ if(res) {
-+ printk("Init RAID Descript Fail!!\n");
-+ return -res;
-+ }
-+
-+ tp.device_name = "Gemini XOR Acceleration";
-+
-+ // request irq
-+#ifndef SPIN_WAIT
-+ res = request_irq(IRQ_RAID, gemini_xor_isr, SA_INTERRUPT, tp.device_name, NULL);
-+#endif
-+ if(res){
-+ printk(KERN_ERR "%s: unable to request IRQ %d for "
-+ "HW XOR %d\n", tp.device_name, IRQ_RAID, res);
-+ return -EBUSY;
-+ }
-+
-+#ifdef XOR_TEST
-+
-+RETEST:
-+ paddr1 = kmalloc(0x1000,GFP_KERNEL);
-+ paddr2 = kmalloc(0x1000,GFP_KERNEL);
-+ paddr3 = kmalloc(0x1000,GFP_KERNEL);
-+ for(i=0;i<TEST_ITERATION;i++) {
-+ printk("XOR test round %d\n",i);
-+ for(res=0;res<(0x1000)/sizeof(int);res++){ // prepare data pattern
-+ paddr1[res]= readl(0xf62000ac);
-+ paddr2[res]= readl(0xf62000ac);
-+ }
-+ for(res=0;res<0x1000/sizeof(int);res++){ // calculate xor by software
-+ paddr3[res] = paddr1[res]^paddr2[res];
-+ }
-+ xor_gemini_2(0x1000,paddr1,paddr2); // calculate xor by hw
-+ for(res=0;res<0x1000/sizeof(int);res++){ // check error
-+ if(paddr1[res]!=paddr3[res]){
-+ printk("XOR ERROR\n");
-+ printk("[%d][0x%x]=0x%x should be %x\n",res,&paddr1[res],paddr1[res],paddr3[res]);
-+ while(1);
-+ }
-+ }
-+ }
-+ kfree(paddr1);
-+ kfree(paddr2);
-+ kfree(paddr3);
-+
-+
-+ // memcpy test
-+ paddr1 = kmalloc(0x4000,GFP_KERNEL);
-+ for(i=0;i<TEST_ITERATION;i++) {
-+ for(res=0;res<(0x4000)/sizeof(int);res++)
-+ paddr1[res]= readl(0xf62000ac);
-+
-+ printk("MEMCOPY round %d\n",i);
-+ paddr2 = kmalloc(0x4000,GFP_KERNEL);
-+ raid_memcpy(paddr2,paddr1,0x4000);
-+ kfree(paddr2);
-+ }
-+ kfree(paddr1);
-+
-+ // memset test
-+ for(i=0;i<TEST_ITERATION;i++) {
-+ raid_memset(paddr1,0xFFFFFFFF,0x4000);
-+ res = readl(0xf62000ac);
-+ printk("MEMFILL fill 0x%x round %d\n",res,i);
-+ paddr1 = kmalloc(0x4000,GFP_KERNEL);
-+ raid_memset(paddr1,res,0x4000);
-+ raid_memset(paddr1,0x0,0x4000);
-+ kfree(paddr1);
-+ }
-+
-+ paddr1 = kmalloc(0x4000,GFP_KERNEL);
-+ for(i=0;i<TEST_ITERATION;i++){
-+ raid_memset(paddr1, i,0x4000);
-+ printk("Pattern check same ? ");
-+ res = raid_memchk(paddr1, i,0x4000);
-+ printk("%s\n",res?"Fail":"OK");
-+ if(res) while(1);
-+
-+ printk("Pattern check diff ? ");
-+ res = raid_memchk(paddr1,readl(0xf62000ac),0x4000);
-+ printk("%s\n",res?"OK":"Fail");
-+ if(!res) while(1);
-+ }
-+ kfree(paddr1);
-+
-+ // SRAM test
-+ raid_write_reg(RAID_PCR, 0,0x00000003);
-+ for(i=0;i<TEST_ITERATION;i++) {
-+ printk("SRAM test %d\n",i);
-+ charact = 0xF7000000;
-+ two_char = 0xF7000000;
-+ four_char = 0xF7000000;
-+ for(res=0;res<(16*1024)/sizeof(char);res++) { // 8-bit access
-+ *charact++ = (unsigned char)res;
-+ }
-+ charact = 0xF7000000;
-+ for(res=0;res<(16*1024)/sizeof(char);res++) {
-+ if(*charact++ != (unsigned char)res){
-+ printk("SRAM data error(8)\n");
-+ while(1);
-+ }
-+ }
-+
-+ for(res=0;res<(16*1024)/sizeof(short);res++) { // 16-bit access
-+ *two_char++ = (unsigned short)res;
-+ }
-+ two_char = 0xF7000000;
-+ for(res=0;res<(16*1024)/sizeof(short);res++) {
-+ if(*two_char++ != (unsigned short)res){
-+ printk("SRAM data error(16)\n");
-+ while(1);
-+ }
-+ }
-+
-+ for(res=0;res<(16*1024)/sizeof(int);res++) { // 32-bit access
-+ *four_char++ = (unsigned int)res;
-+ }
-+ four_char = 0xF7000000;
-+ for(res=0;res<(16*1024)/sizeof(int);res++) {
-+ if(*four_char++ != (unsigned int)res){
-+ printk("SRAM data error(32)\n");
-+ while(1);
-+ }
-+ }
-+ }
-+ raid_write_reg(RAID_PCR, SRAM_PAR_SIZE,0x00000003);
-+
-+#endif
-+ return 0;
-+}
-+
-+void __exit gemini_xor_exit(void)
-+{
-+ DMA_MFREE(tp.tx_desc, TX_DESC_NUM*sizeof(RAID_DESCRIPTOR_T),(unsigned int)tp.tx_desc_dma);
-+ DMA_MFREE(tp.rx_desc, RX_DESC_NUM*sizeof(RAID_DESCRIPTOR_T),(unsigned int)tp.rx_desc_dma);
-+ free_irq(IRQ_RAID, NULL);
-+}
-+
-+
-+static int gemini_xor_init_desc(void)
-+{
-+ unsigned int i;
-+ dma_addr_t tx_first_desc_dma;
-+ dma_addr_t rx_first_desc_dma;
-+ RAID_DMA_STATUS_T dma_status;
-+
-+ printk("Initial RAID Descripter...\n");
-+
-+ tp.tx_desc = (RAID_DESCRIPTOR_T*)DMA_MALLOC(TX_DESC_NUM*sizeof(RAID_DESCRIPTOR_T),(dma_addr_t *)&tp.tx_desc_dma);
-+ tx_desc_virtual_base = (unsigned int)tp.tx_desc - (unsigned int)tp.tx_desc_dma;
-+ memset(tp.tx_desc,0x00,TX_DESC_NUM*sizeof(RAID_DESCRIPTOR_T));
-+
-+ tp.rx_desc = (RAID_DESCRIPTOR_T*)DMA_MALLOC(RX_DESC_NUM*sizeof(RAID_DESCRIPTOR_T),(dma_addr_t *)&tp.rx_desc_dma);
-+ rx_desc_virtual_base = (unsigned int)tp.rx_desc - (unsigned int)tp.rx_desc_dma;
-+ memset(tp.rx_desc,0x00,RX_DESC_NUM*sizeof(RAID_DESCRIPTOR_T));
-+ printk("XOR:tx_desc = %08x\n",(unsigned int)tp.tx_desc);
-+ printk("XOR:rx_desc = %08x\n",(unsigned int)tp.rx_desc);
-+ printk("XOR:tx_desc_dma = %08x\n",(unsigned int)tp.tx_desc_dma);
-+ printk("XOR:rx_desc_dma = %08x\n",(unsigned int)tp.rx_desc_dma);
-+
-+ if ((tp.tx_desc == NULL) || (tp.rx_desc == NULL)) {
-+ if (tp.tx_desc)
-+ DMA_MFREE(tp.tx_desc, TX_DESC_NUM*sizeof(RAID_DESCRIPTOR_T),(dma_addr_t)tp.tx_desc_dma);
-+ if (tp.rx_desc)
-+ DMA_MFREE(tp.rx_desc, RX_DESC_NUM*sizeof(RAID_DESCRIPTOR_T),(dma_addr_t)tp.rx_desc_dma);
-+ return -ENOMEM;
-+ }
-+
-+ tp.tx_cur_desc = tp.tx_desc; /* virtual address */
-+ tp.tx_finished_desc = tp.tx_desc; /* virtual address */
-+ tx_first_desc_dma = (dma_addr_t)tp.tx_desc_dma; /* physical address */
-+ for (i = 1; i < TX_DESC_NUM; i++) {
-+ tp.tx_desc->func_ctrl.bits.own = CPU;
-+ tp.tx_desc->func_ctrl.bits.buffer_size = 0;
-+ tp.tx_desc_dma = tp.tx_desc_dma + sizeof(RAID_DESCRIPTOR_T);
-+// tp.tx_desc->next_desc_addr.bits32 = (unsigned int)tp.tx_desc_dma | 0x0B;
-+ tp.tx_desc->next_desc_addr.bits32 = ((unsigned int)tx_first_desc_dma | 0x0B) + i*0x10;
-+ tp.tx_desc = &tp.tx_desc[1];
-+ }
-+ tp.tx_desc->func_ctrl.bits.own = DMA;
-+ tp.tx_desc->next_desc_addr.bits32 = (unsigned int)tx_first_desc_dma|0x0b;
-+ tp.tx_desc = tp.tx_cur_desc;
-+ tp.tx_desc_dma = (unsigned int*)tx_first_desc_dma;
-+ tp.tx_first_desc = tp.tx_desc ;
-+
-+ tp.rx_cur_desc = tp.rx_desc; /* virtual address */
-+ tp.rx_finished_desc = tp.rx_desc; /* virtual address */
-+ rx_first_desc_dma = (dma_addr_t)tp.rx_desc_dma; /* physical address */
-+ for (i = 1; i < RX_DESC_NUM; i++) {
-+ tp.rx_desc->func_ctrl.bits.own = DMA;
-+ tp.rx_desc->func_ctrl.bits.buffer_size = 0;
-+ tp.rx_desc_dma = tp.rx_desc_dma + sizeof(RAID_DESCRIPTOR_T);
-+// tp.rx_desc->next_desc_addr.bits32 = (unsigned int)tp.rx_desc_dma | 0x0B;
-+ tp.rx_desc->next_desc_addr.bits32 = ((unsigned int)rx_first_desc_dma | 0x0B) + i*0x10;
-+ tp.rx_desc = &tp.rx_desc[1];
-+ }
-+ tp.rx_desc->func_ctrl.bits.own = DMA;
-+ tp.rx_desc->next_desc_addr.bits32 = rx_first_desc_dma|0x0b;
-+ tp.rx_desc = tp.rx_cur_desc;
-+ tp.rx_desc_dma = (unsigned int*)rx_first_desc_dma;
-+ tp.rx_first_desc = tp.rx_desc ;
-+ tp.busy = 0;
-+ tp.status = COMPLETE;
-+
-+ // Partition SRAM size
-+ raid_write_reg(RAID_PCR, SRAM_PAR_SIZE,0x00000003);
-+
-+ // config tx DMA controler
-+ txdma_ctrl.bits32 = 0;
-+ txdma_ctrl.bits.td_start = 0;
-+ txdma_ctrl.bits.td_continue = 1;
-+ txdma_ctrl.bits.td_chain_mode = 1;
-+ txdma_ctrl.bits.td_prot = 0;
-+ txdma_ctrl.bits.td_burst_size = 1;
-+ txdma_ctrl.bits.td_bus = 3;
-+ txdma_ctrl.bits.td_endian = 0;
-+ txdma_ctrl.bits.td_finish_en = 1;
-+ txdma_ctrl.bits.td_fail_en = 1;
-+ txdma_ctrl.bits.td_perr_en = 1;
-+ txdma_ctrl.bits.td_eod_en = 0; // enable tx descript
-+ txdma_ctrl.bits.td_eof_en = 0;
-+ raid_write_reg(RAID_FCHDMA_CTRL, txdma_ctrl.bits32,0xFFFFFFFF);
-+
-+ // config rx DMA controler
-+ rxdma_ctrl.bits32 = 0;
-+ rxdma_ctrl.bits.rd_start = 0;
-+ rxdma_ctrl.bits.rd_continue = 1;
-+ rxdma_ctrl.bits.rd_chain_mode = 1;
-+ rxdma_ctrl.bits.rd_prot = 0;
-+ rxdma_ctrl.bits.rd_burst_size = 1;
-+ rxdma_ctrl.bits.rd_bus = 3;
-+ rxdma_ctrl.bits.rd_endian = 0;
-+ rxdma_ctrl.bits.rd_finish_en = 0;
-+ rxdma_ctrl.bits.rd_fail_en = 1;
-+ rxdma_ctrl.bits.rd_perr_en = 1;
-+ rxdma_ctrl.bits.rd_eod_en = 0;
-+ rxdma_ctrl.bits.rd_eof_en = 0;
-+ raid_write_reg(RAID_STRDMA_CTRL, rxdma_ctrl.bits32,0xFFFFFFFF);
-+
-+ // enable interrupt
-+ dma_status.bits32 = 3; // enable RpInt
-+ raid_write_reg(RAID_DMA_STATUS, dma_status.bits32,0xFFFFFFFF);
-+
-+ return 0;
-+}
-+
-+module_init(gemini_xor_init);
-+module_exit(gemini_xor_exit);
-+
---- a/arch/arm/mm/Kconfig
-+++ b/arch/arm/mm/Kconfig
-@@ -187,6 +187,26 @@ config CPU_ARM926T
- Say Y if you want support for the ARM926T processor.
- Otherwise, say N.
-
-+###### for Storlink SoC ######
-+config CPU_FA526
-+ bool "FA526 processor"
-+ depends on ARCH_SL2312
-+ default y
-+ select CPU_32v4
-+ select CPU_ABRT_EV4
-+ select CPU_CACHE_FA
-+ select CPU_CACHE_VIVT
-+ select CPU_CP15_MMU
-+ select CPU_COPY_FA
-+ select CPU_TLB_FA
-+ select CPU_FA_BTB
-+ help
-+ The FA526 is a version of the ARM9 compatible processor, but with smaller
-+ instruction and data caches. It is used in Storlink Sword device family.
-+
-+ Say Y if you want support for the FA526 processor.
-+ Otherwise, say N.
-+
- # ARM940T
- config CPU_ARM940T
- bool "Support ARM940T processor" if ARCH_INTEGRATOR
-@@ -461,6 +481,9 @@ config CPU_CACHE_VIVT
- config CPU_CACHE_VIPT
- bool
-
-+config CPU_CACHE_FA
-+ bool
-+
- if MMU
- # The copy-page model
- config CPU_COPY_V3
-@@ -475,6 +498,12 @@ config CPU_COPY_V4WB
- config CPU_COPY_V6
- bool
-
-+config CPU_COPY_FA
-+ bool
-+
-+config CPU_FA_BTB
-+ bool
-+
- # This selects the TLB model
- config CPU_TLB_V3
- bool
-@@ -534,6 +563,14 @@ config CPU_CP15_MPU
- config IO_36
- bool
-
-+config CPU_TLB_FA
-+ bool
-+ help
-+ //TODO
-+ Faraday ARM FA526 architecture, unified TLB with writeback cache
-+ and invalidate instruction cache entry. Branch target buffer is also
-+ supported.
-+
- comment "Processor Features"
-
- config ARM_THUMB
-@@ -600,7 +637,7 @@ config CPU_DCACHE_SIZE
-
- config CPU_DCACHE_WRITETHROUGH
- bool "Force write through D-cache"
-- depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020) && !CPU_DCACHE_DISABLE
-+ depends on (CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_FA526) && !CPU_DCACHE_DISABLE
- default y if CPU_ARM925T
- help
- Say Y here to use the data cache in writethrough mode. Unless you
---- a/arch/arm/mm/Makefile
-+++ b/arch/arm/mm/Makefile
-@@ -32,6 +32,7 @@ obj-$(CONFIG_CPU_CACHE_V4WT) += cache-v4
- obj-$(CONFIG_CPU_CACHE_V4WB) += cache-v4wb.o
- obj-$(CONFIG_CPU_CACHE_V6) += cache-v6.o
- obj-$(CONFIG_CPU_CACHE_V7) += cache-v7.o
-+obj-$(CONFIG_CPU_CACHE_FA) += cache-fa.o
-
- obj-$(CONFIG_CPU_COPY_V3) += copypage-v3.o
- obj-$(CONFIG_CPU_COPY_V4WT) += copypage-v4wt.o
-@@ -40,6 +41,7 @@ obj-$(CONFIG_CPU_COPY_V6) += copypage-v6
- obj-$(CONFIG_CPU_SA1100) += copypage-v4mc.o
- obj-$(CONFIG_CPU_XSCALE) += copypage-xscale.o
- obj-$(CONFIG_CPU_XSC3) += copypage-xsc3.o
-+obj-$(CONFIG_CPU_COPY_FA) += copypage-fa.o
-
- obj-$(CONFIG_CPU_TLB_V3) += tlb-v3.o
- obj-$(CONFIG_CPU_TLB_V4WT) += tlb-v4.o
-@@ -47,6 +49,7 @@ obj-$(CONFIG_CPU_TLB_V4WB) += tlb-v4wb.o
- obj-$(CONFIG_CPU_TLB_V4WBI) += tlb-v4wbi.o
- obj-$(CONFIG_CPU_TLB_V6) += tlb-v6.o
- obj-$(CONFIG_CPU_TLB_V7) += tlb-v7.o
-+obj-$(CONFIG_CPU_TLB_FA) += tlb-fa.o
-
- obj-$(CONFIG_CPU_ARM610) += proc-arm6_7.o
- obj-$(CONFIG_CPU_ARM710) += proc-arm6_7.o
-@@ -60,6 +63,7 @@ obj-$(CONFIG_CPU_ARM925T) += proc-arm925
- obj-$(CONFIG_CPU_ARM926T) += proc-arm926.o
- obj-$(CONFIG_CPU_ARM940T) += proc-arm940.o
- obj-$(CONFIG_CPU_ARM946E) += proc-arm946.o
-+obj-$(CONFIG_CPU_FA526) += proc-fa526.o
- obj-$(CONFIG_CPU_ARM1020) += proc-arm1020.o
- obj-$(CONFIG_CPU_ARM1020E) += proc-arm1020e.o
- obj-$(CONFIG_CPU_ARM1022) += proc-arm1022.o
---- /dev/null
-+++ b/arch/arm/mm/cache-fa.S
-@@ -0,0 +1,400 @@
-+/*
-+ * linux/arch/arm/mm/cache-fa.S
-+ *
-+ * Copyright (C) 2005 Faraday Corp.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * Processors: FA520 FA526 FA626
-+ * 03/31/2005 : Luke Lee created, modified from cache-v4wb.S
-+ * 04/06/2005 : 1. Read CR0-1 and determine the cache size dynamically,
-+ * to suit all Faraday CPU series
-+ * 2. Fixed all functions
-+ * 04/08/2005 : insert CONFIG_CPU_ICACHE_DISABLE and CONFIG_CPU_DCACHE_DISABLE
-+ * 04/12/2005 : TODO: make this processor dependent or a self-modifying code to
-+ * inline cache len/size info into the instructions, as reading cache
-+ * size and len info in memory could cause another cache miss.
-+ * 05/05/2005 : Modify fa_flush_user_cache_range to comply APCS.
-+ * 05/19/2005 : Adjust for boundary conditions.
-+ */
-+#include <linux/linkage.h>
-+#include <linux/init.h>
-+#include <asm/hardware.h>
-+#include <asm/page.h>
-+#include "proc-macros.S"
-+
-+#define CACHE_DLINESIZE 16
-+#ifdef CONFIG_SL3516_ASIC
-+#define CACHE_DSIZE 8192
-+#else
-+#define CACHE_DSIZE 16384
-+#endif
-+#define CACHE_ILINESIZE 16
-+#define CACHE_ISIZE 16384
-+
-+/* Luke Lee 04/06/2005 ins begin */
-+/*
-+ * initialize_cache_info()
-+ *
-+ * Automatic detection of DSIZE, DLEN, ISIZE, ILEN variables according to
-+ * system register CR0-1
-+ * Destroyed register: r0, r1, r2, r3, ip
-+ */
-+ .align
-+ENTRY(fa_initialize_cache_info)
-+ mov r3, #1 @ r3 always = 1
-+ adr ip, __fa_cache_ilen
-+
-+ mrc p15, 0, r0, c0, c0, 1
-+ /* ILEN */
-+ and r1, r0, #3 @ bits [1:0]
-+ add r1, r1, #3 @ cache line size is at least 8 bytes (2^3)
-+ mov r2, r3, lsl r1 @ r2 = 1<<r1
-+ str r2, [ip], #4
-+ /* ISIZE */
-+ mov r1, r0, lsr #6 @ bits [8:6]
-+ and r1, r1, #7
-+ add r1, r1, #9 @ cache size is at least 512 bytes (2^9)
-+ mov r2, r3, lsl r1
-+ str r2, [ip], #4
-+ /* DLEN */
-+ mov r1, r0, lsr #12
-+ and r1, r1, #3 @ bits [13:12]
-+ add r1, r1, #3 @ cache line size is at least 8 bytes (2^3)
-+ mov r2, r3, lsl r1 @ r2 = 1<<r1
-+ str r2, [ip], #4
-+ /* DSIZE */
-+ mov r1, r0, lsr #18 @ bits [20:18]
-+ and r1, r1, #7
-+ add r1, r1, #9 @ cache size is at least 512 bytes (2^9)
-+ mov r2, r3, lsl r1
-+ str r2, [ip]
-+ mov pc, lr
-+
-+ /* Warning : Do not change the order ! Successive codes depends on this */
-+ .align
-+ .globl __fa_cache_ilen, __fa_cache_isize, __fa_cache_dlen, __fa_cache_dsize
-+__fa_cache_ilen:
-+ .word 0 @ instruction cache line length
-+__fa_cache_isize:
-+ .word 0 @ instruction cache size
-+__fa_cache_dlen:
-+ .word 0 @ data cahce line length
-+__fa_cache_dsize:
-+ .word 0 @ data cache size
-+
-+/* Luke Lee 04/06/2005 ins end */
-+
-+/*
-+ * flush_user_cache_all()
-+ *
-+ * Clean and invalidate all cache entries in a particular address
-+ * space.
-+ */
-+ENTRY(fa_flush_user_cache_all)
-+ /* FALLTHROUGH */
-+/*
-+ * flush_kern_cache_all()
-+ *
-+ * Clean and invalidate the entire cache.
-+ */
-+ENTRY(fa_flush_kern_cache_all)
-+/* Luke Lee 04/06/2005 mod ok */
-+ mov ip, #0
-+
-+#ifndef CONFIG_CPU_ICACHE_DISABLE
-+ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
-+#endif
-+
-+__flush_whole_cache:
-+
-+#ifndef CONFIG_CPU_DCACHE_DISABLE
-+ mov ip, #0
-+# ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-+ mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
-+# else
-+ mcr p15, 0, ip, c7,c14, 0 @ clean/invalidate D cache
-+# endif
-+#endif /*CONFIG_CPU_DCACHE_DISABLE*/
-+
-+#ifndef CONFIG_CPU_FA_WB_DISABLE
-+ mcr p15, 0, ip, c7, c10, 4 @ drain write buffer
-+#endif
-+
-+#ifdef CONFIG_CPU_FA_BTB
-+ mcr p15, 0, ip, c7, c5, 6 @ invalidate BTB
-+ nop
-+ nop
-+#endif
-+
-+/* Luke Lee 04/06/2005 que todo tofix : should iscratchpad and dscratchpad be invalidated ? */
-+ mov pc, lr
-+
-+/*
-+ * flush_user_cache_range(start, end, flags)
-+ *
-+ * Invalidate a range of cache entries in the specified
-+ * address space.
-+ *
-+ * - start - start address (inclusive, page aligned)
-+ * - end - end address (exclusive, page aligned)
-+ * - flags - vma_area_struct flags describing address space
-+ */
-+ENTRY(fa_flush_user_cache_range)
-+
-+/* Luke Lee 04/06/2005 mod ok */
-+ /* Luke Lee 04/07/2005 ins 1 */
-+ mov ip, #0
-+ sub r3, r1, r0 @ calculate total size
-+#ifndef CONFIG_CPU_ICACHE_DISABLE
-+ tst r2, #VM_EXEC @ executable region?
-+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
-+#endif
-+
-+#ifndef CONFIG_CPU_DCACHE_DISABLE
-+ /* Luke Lee 04/06/2005 ins 2 mod 1 */
-+ cmp r3, #CACHE_DSIZE @ total size >= limit?
-+ bhs __flush_whole_cache @ flush whole D cache
-+
-+ //debug_Aaron
-+ bic r0, r0, #CACHE_DLINESIZE-1
-+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate boundary D entry
-+ bic r1, r1, #CACHE_DLINESIZE-1
-+ mcr p15, 0, r1, c7, c14, 1 @ clean and invalidate boundary D entry
-+
-+
-+1: /* Luke Lee 04/06/2005 del 2 ins 5 */
-+
-+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
-+#else
-+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
-+#endif
-+ /* Luke Lee 04/06/2005 mod 1 */
-+ add r0, r0, #CACHE_DLINESIZE
-+ cmp r0, r1
-+ bls 1b @ Luke Lee 05/19/2005
-+#endif /* CONFIG_CPU_DCACHE_DISABLE */
-+
-+#ifndef CONFIG_CPU_FA_WB_DISABLE
-+ tst r2, #VM_EXEC
-+ /* Luke Lee 04/06/2005 mod 1 tofix todo : ne->eq */
-+ mcreq p15, 0, r4, c7, c10, 4 @ drain write buffer
-+#endif
-+
-+ /* Luke Lee 04/06/2005 ins block */
-+#ifdef CONFIG_CPU_FA_BTB
-+ tst r2, #VM_EXEC
-+ mov ip, #0
-+ mcrne p15, 0, ip, c7, c5, 6 @ invalidate BTB
-+ nop
-+ nop
-+#endif
-+ mov pc, lr
-+
-+/*
-+ * flush_kern_dcache_page(void *page)
-+ *
-+ * Ensure no D cache aliasing occurs, either with itself or
-+ * the I cache
-+ *
-+ * - addr - page aligned address
-+ */
-+ENTRY(fa_flush_kern_dcache_page)
-+ add r1, r0, #PAGE_SZ
-+ /* fall through */
-+
-+/*
-+ * coherent_kern_range(start, end)
-+ *
-+ * Ensure coherency between the Icache and the Dcache in the
-+ * region described by start. If you have non-snooping
-+ * Harvard caches, you need to implement this function.
-+ *
-+ * - start - virtual start address
-+ * - end - virtual end address
-+ */
-+ENTRY(fa_coherent_kern_range)
-+ /* fall through */
-+
-+/*
-+ * coherent_user_range(start, end)
-+ *
-+ * Ensure coherency between the Icache and the Dcache in the
-+ * region described by start. If you have non-snooping
-+ * Harvard caches, you need to implement this function.
-+ *
-+ * - start - virtual start address
-+ * - end - virtual end address
-+ */
-+ENTRY(fa_coherent_user_range)
-+
-+/* Luke Lee 04/06/2005 mod ok */
-+ /* Luke Lee 04/06/2005 ins 3 mod 1 */
-+ bic r0, r0, #CACHE_DLINESIZE-1
-+
-+ //debug_Aaron
-+ bic r0, r0, #CACHE_DLINESIZE-1
-+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate boundary D entry
-+ bic r1, r1, #CACHE_DLINESIZE-1
-+ mcr p15, 0, r1, c7, c14, 1 @ clean and invalidate boundary D entry
-+
-+#if !(defined(CONFIG_CPU_DCACHE_DISABLE) && defined(CONFIG_CPU_ICACHE_DISABLE))
-+1: /* Luke Lee 04/06/2005 del 2 ins 5 mod 1 */
-+#ifndef CONFIG_CPU_DCACHE_DISABLE
-+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
-+#else
-+ mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
-+#endif
-+#endif /* CONFIG_CPU_DCACHE_DISABLE */
-+
-+#ifndef CONFIG_CPU_ICACHE_DISABLE
-+ mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
-+#endif
-+ add r0, r0, #CACHE_DLINESIZE
-+ cmp r0, r1
-+ bls 1b @ Luke Lee 05/19/2005 blo->bls
-+#endif /* !(defined(CONFIG_CPU_DCACHE_DISABLE) && defined(CONFIG_CPU_ICACHE_DISABLE)) */
-+
-+ mov ip, #0
-+#ifdef CONFIG_CPU_FA_BTB
-+ mcr p15, 0, ip, c7, c5, 6 @ invalidate BTB
-+ nop
-+ nop
-+#endif
-+
-+/* Luke Lee 04/08/2005 ins 1 skp 1 ins 1 */
-+#ifndef CONFIG_CPU_FA_WB_DISABLE
-+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
-+#endif
-+
-+ mov pc, lr
-+
-+/*
-+ * dma_inv_range(start, end)
-+ *
-+ * Invalidate (discard) the specified virtual address range.
-+ * May not write back any entries. If 'start' or 'end'
-+ * are not cache line aligned, those lines must be written
-+ * back.
-+ *
-+ * - start - virtual start address
-+ * - end - virtual end address
-+ */
-+ENTRY(fa_dma_inv_range)
-+
-+/* Luke Lee 04/06/2005 mod ok */
-+
-+#ifndef CONFIG_CPU_DCACHE_DISABLE
-+
-+ //debug_Aaron
-+ bic r0, r0, #CACHE_DLINESIZE-1
-+ mcr p15, 0, r0, c7, c6, 1 @ invalidate boundary D entry
-+ bic r1, r1, #CACHE_DLINESIZE-1
-+ mcr p15, 0, r1, c7, c6, 1 @ invalidate boundary D entry
-+
-+ /* Luke Lee 04/06/2005 ins 4 mod 2 */
-+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-+ tst r0, #CACHE_DLINESIZE -1
-+ bic r0, r0, #CACHE_DLINESIZE -1
-+
-+//debug_Aaron
-+ //mcrne p15, 0, r0, c7, c10, 1 @ clean boundary D entry
-+
-+ /* Luke Lee 04/06/2005 mod 1 */
-+ /* Luke Lee 05/19/2005 always clean the end-point boundary mcrne->mcr */
-+ ////tst r1, #CACHE_DLINESIZE -1
-+ //mcr p15, 0, r1, c7, c10, 1 @ clean boundary D entry
-+ /* Luke Lee 04/06/2005 ins 1 */
-+#else
-+ bic r0, r0, #CACHE_DLINESIZE -1
-+#endif
-+
-+//debug_Aaron
-+1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
-+//1: mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry
-+
-+ /* Luke Lee 04/06/2005 mod 1 */
-+ add r0, r0, #CACHE_DLINESIZE
-+ cmp r0, r1
-+ bls 1b @ Luke Lee 05/19/2005 blo->bls
-+#endif /* CONFIG_CPU_DCACHE_DISABLE */
-+
-+ /* Luke Lee 04/06/2005 ins 1 */
-+#ifndef CONFIG_CPU_FA_WB_DISABLE
-+ mov r0, #0
-+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
-+#endif
-+
-+ mov pc, lr
-+
-+/*
-+ * dma_clean_range(start, end)
-+ *
-+ * Clean (write back) the specified virtual address range.
-+ *
-+ * - start - virtual start address
-+ * - end - virtual end address
-+ */
-+ENTRY(fa_dma_clean_range)
-+
-+/* Luke Lee 04/06/2005 mod ok */
-+#ifndef CONFIG_CPU_DCACHE_DISABLE
-+
-+ //debug_Aaron
-+ bic r0, r0, #CACHE_DLINESIZE-1
-+ mcr p15, 0, r0, c7, c10, 1 @ clean boundary D entry
-+ bic r1, r1, #CACHE_DLINESIZE-1
-+ mcr p15, 0, r1, c7, c10, 1 @ clean boundary D entry
-+
-+ /* Luke Lee 04/06/2005 ins 4 mod 2 */
-+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-+ bic r0, r0, #CACHE_DLINESIZE - 1
-+
-+//debug_Aaron
-+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
-+//1: mcr p15, 0, r0, c7, c14, 1 @ clean D entry
-+ add r0, r0, #CACHE_DLINESIZE
-+ cmp r0, r1
-+ bls 1b @ Luke Lee 05/19/2005 blo->bls
-+ /* Luke Lee 04/06/2005 ins 2 */
-+#endif
-+#endif /* CONFIG_CPU_DCACHE_DISABLE */
-+
-+#ifndef CONFIG_CPU_FA_WB_DISABLE
-+ mov r0, #0
-+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
-+#endif
-+
-+ mov pc, lr
-+
-+/*
-+ * dma_flush_range(start, end)
-+ *
-+ * Clean and invalidate the specified virtual address range.
-+ *
-+ * - start - virtual start address
-+ * - end - virtual end address
-+ *
-+ * This is actually the same as fa_coherent_kern_range()
-+ */
-+ .globl fa_dma_flush_range
-+ .set fa_dma_flush_range, fa_coherent_kern_range
-+
-+ __INITDATA
-+
-+ .type fa_cache_fns, #object
-+ENTRY(fa_cache_fns)
-+ .long fa_flush_kern_cache_all
-+ .long fa_flush_user_cache_all
-+ .long fa_flush_user_cache_range
-+ .long fa_coherent_kern_range
-+ .long fa_coherent_user_range
-+ .long fa_flush_kern_dcache_page
-+ .long fa_dma_inv_range
-+ .long fa_dma_clean_range
-+ .long fa_dma_flush_range
-+ .size fa_cache_fns, . - fa_cache_fns
---- /dev/null
-+++ b/arch/arm/mm/copypage-fa.S
-@@ -0,0 +1,106 @@
-+/*
-+ * linux/arch/arm/lib/copypage-fa.S
-+ *
-+ * Copyright (C) 2005 Faraday Corp.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * ASM optimised string functions
-+ * 05/18/2005 : Luke Lee created, modified from copypage-v4wb.S
-+ */
-+#include <linux/linkage.h>
-+#include <linux/init.h>
-+#include <asm/asm-offsets.h>
-+
-+ .text
-+/*
-+ * ARMv4 optimised copy_user_page for Faraday processors
-+ *
-+ * We flush the destination cache lines just before we write the data into the
-+ * corresponding address. Since the Dcache is read-allocate, this removes the
-+ * Dcache aliasing issue. The writes will be forwarded to the write buffer,
-+ * and merged as appropriate.
-+ *
-+ * Note: We rely on all ARMv4 processors implementing the "invalidate D line"
-+ * instruction. If your processor does not supply this, you have to write your
-+ * own copy_user_page that does the right thing.
-+ *
-+ * copy_user_page(to,from,vaddr)
-+ */
-+ .align 4
-+ENTRY(fa_copy_user_page)
-+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-+ /* Write through */
-+ stmfd sp!, {r4, lr} @ 2
-+ mov r2, #PAGE_SZ/32 @ 1
-+
-+ ldmia r1!, {r3, r4, ip, lr} @ 4
-+1: stmia r0!, {r3, r4, ip, lr} @ 4
-+ ldmia r1!, {r3, r4, ip, lr} @ 4+1
-+ subs r2, r2, #1 @ 1
-+ stmia r0!, {r3, r4, ip, lr} @ 4
-+ ldmneia r1!, {r3, r4, ip, lr} @ 4
-+ bne 1b @ 1
-+
-+ mcr p15, 0, r2, c7, c7, 0 @ flush ID cache
-+ ldmfd sp!, {r4, pc} @ 3
-+#else
-+ /* Write back */
-+ stmfd sp!, {r4, lr} @ 2
-+ mov r2, #PAGE_SZ/32 @ 1
-+
-+1: ldmia r1!, {r3, r4, ip, lr} @ 4
-+ mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line
-+ stmia r0!, {r3, r4, ip, lr} @ 4
-+ ldmia r1!, {r3, r4, ip, lr} @ 4
-+ mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line
-+ stmia r0!, {r3, r4, ip, lr} @ 4
-+ subs r2, r2, #1 @ 1
-+ bne 1b
-+ mcr p15, 0, r2, c7, c10, 4 @ 1 drain WB
-+ ldmfd sp!, {r4, pc} @ 3
-+#endif
-+
-+/*
-+ * ARMv4 optimised clear_user_page
-+ *
-+ * Same story as above.
-+ */
-+ .align 4
-+ENTRY(fa_clear_user_page)
-+ str lr, [sp, #-4]!
-+ mov r1, #PAGE_SZ/32 @ 1
-+ mov r2, #0 @ 1
-+ mov r3, #0 @ 1
-+ mov ip, #0 @ 1
-+ mov lr, #0 @ 1
-+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-+ /* Write through */
-+1: stmia r0!, {r2, r3, ip, lr} @ 4
-+ stmia r0!, {r2, r3, ip, lr} @ 4
-+ subs r1, r1, #1 @ 1
-+ bne 1b @ 1
-+
-+ mcr p15, 0, r1, c7, c7, 0 @ flush ID cache
-+ ldr pc, [sp], #4
-+#else
-+ /* Write back */
-+1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line
-+ stmia r0!, {r2, r3, ip, lr} @ 4
-+ mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line
-+ stmia r0!, {r2, r3, ip, lr} @ 4
-+ subs r1, r1, #1 @ 1
-+ bne 1b @ 1
-+ mcr p15, 0, r1, c7, c10, 4 @ 1 drain WB
-+ ldr pc, [sp], #4
-+#endif
-+
-+ __INITDATA
-+
-+ .type fa_user_fns, #object
-+ENTRY(fa_user_fns)
-+ .long fa_clear_user_page
-+ .long fa_copy_user_page
-+ .size fa_user_fns, . - fa_user_fns
---- a/arch/arm/mm/init.c
-+++ b/arch/arm/mm/init.c
-@@ -23,6 +23,7 @@
-
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
-+#include <asm/arch/ipi.h>
-
- #include "mm.h"
-
-@@ -252,6 +253,11 @@ bootmem_init_node(int node, int initrd_n
- initrd_end = initrd_start + phys_initrd_size;
- }
- #endif
-+#ifdef CONFIG_GEMINI_IPI
-+ printk("CPU ID:%d\n",getcpuid());
-+// reserve_bootmem_node(NODE_DATA(0), 0x400000, 0x400000); //CPU0 space
-+// reserve_bootmem_node(NODE_DATA(0), SHAREADDR, SHARE_MEM_SIZE); //share memory
-+#endif
-
- /*
- * Finally, reserve any node zero regions.
---- /dev/null
-+++ b/arch/arm/mm/proc-fa526.S
-@@ -0,0 +1,407 @@
-+/*
-+ * linux/arch/arm/mm/proc-fa526.S: MMU functions for FA526
-+ *
-+ * Copyright (C) 2005 Faraday Corp.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ *
-+ * These are the low level assembler for performing cache and TLB
-+ * functions on the fa526.
-+ *
-+ * Written by : Luke Lee
-+ */
-+#include <linux/linkage.h>
-+#include <linux/init.h>
-+#include <asm/assembler.h>
-+#include <asm/pgtable.h>
-+#include <asm/pgtable-hwdef.h>
-+#include <asm/elf.h>
-+#include <asm/hardware.h>
-+#include <asm/page.h>
-+#include <asm/ptrace.h>
-+#include <asm/system.h>
-+#include "proc-macros.S"
-+
-+#define CACHE_DLINESIZE 16
-+
-+ .text
-+/*
-+ * cpu_fa526_proc_init()
-+ */
-+ENTRY(cpu_fa526_proc_init)
-+ /* MMU is already ON here, ICACHE, DCACHE conditionally disabled */
-+
-+ mov r0, #1
-+ nop
-+ nop
-+ mcr p15, 0, r0, c1, c1, 0 @ turn-on ECR
-+ nop
-+ nop
-+
-+ mrc p15, 0, r0, c1, c0, 0 @ read ctrl register
-+
-+#ifdef CONFIG_CPU_FA_BTB
-+ orr r0, r0, #CR_Z
-+#else
-+ bic r0, r0, #CR_Z
-+#endif
-+#ifdef CONFIG_CPU_FA_WB_DISABLE
-+ mov r1, #0
-+ mcr p15, 0, r1, c7, c10, 4 @ drain write buffer
-+ nop
-+ nop
-+ bic r0, r0, #CR_W
-+#else
-+ orr r0, r0, #CR_W
-+#endif
-+#ifdef CONFIG_CPU_DCACHE_DISABLE
-+ bic r0, r0, #CR_C
-+#else
-+ orr r0, r0, #CR_C
-+#endif
-+#ifdef CONFIG_CPU_ICACHE_DISABLE
-+ bic r0, r0, #CR_I
-+#else
-+ orr r0, r0, #CR_I
-+#endif
-+
-+ nop
-+ nop
-+ mcr p15, 0, r0, c1, c0, 0
-+ nop
-+ nop
-+
-+ mov r5, lr
-+ bl fa_initialize_cache_info @ destroy r0~r4
-+ mov pc, r5 @ return
-+
-+
-+/*
-+ * cpu_fa526_proc_fin()
-+ */
-+ENTRY(cpu_fa526_proc_fin)
-+ stmfd sp!, {lr}
-+ mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
-+ msr cpsr_c, ip
-+
-+ bl fa_flush_kern_cache_all
-+ mrc p15, 0, r0, c1, c0, 0 @ ctrl register
-+ bic r0, r0, #0x1000 @ ...i............
-+ bic r0, r0, #0x000e @ ............wca.
-+ mcr p15, 0, r0, c1, c0, 0 @ disable caches
-+
-+ nop
-+ nop
-+ ldmfd sp!, {pc}
-+
-+/*
-+ * cpu_fa526_reset(loc)
-+ *
-+ * Perform a soft reset of the system. Put the CPU into the
-+ * same state as it would be if it had been reset, and branch
-+ * to what would be the reset vector.
-+ *
-+ * loc: location to jump to for soft reset
-+ */
-+ .align 4
-+ENTRY(cpu_fa526_reset)
-+ mov ip, #0
-+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
-+#ifndef CONFIG_CPU_FA_WB_DISABLE
-+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
-+#endif
-+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
-+ mrc p15, 0, ip, c1, c0, 0 @ ctrl register
-+ bic ip, ip, #0x000f @ ............wcam
-+ bic ip, ip, #0x1100 @ ...i...s........
-+
-+ bic ip, ip, #0x0800 @ BTB off
-+ mcr p15, 0, ip, c1, c0, 0 @ ctrl register
-+ nop
-+ nop
-+ mov pc, r0
-+
-+/*
-+ * cpu_fa526_do_idle()
-+ */
-+ .align 4
-+ENTRY(cpu_fa526_do_idle)
-+
-+#ifdef CONFIG_CPU_FA_IDLE
-+ nop
-+ nop
-+ mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt (IDLE mode)
-+#endif
-+ mov pc, lr
-+
-+
-+ENTRY(cpu_fa526_dcache_clean_area)
-+
-+#ifndef CONFIG_CPU_DCACHE_DISABLE
-+#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-+1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
-+ add r0, r0, #CACHE_DLINESIZE
-+ subs r1, r1, #CACHE_DLINESIZE
-+ bhi 1b
-+#endif
-+#endif
-+ mov pc, lr
-+
-+
-+/* =============================== PageTable ============================== */
-+
-+/*
-+ * cpu_fa526_switch_mm(pgd)
-+ *
-+ * Set the translation base pointer to be as described by pgd.
-+ *
-+ * pgd: new page tables
-+ */
-+ .align 4
-+
-+ .globl fault_address
-+fault_address:
-+ .long 0
-+
-+ENTRY(cpu_fa526_switch_mm)
-+
-+ mov ip, #0
-+#ifndef CONFIG_CPU_DCACHE_DISABLE
-+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-+ mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
-+#else
-+ mcr p15, 0, ip, c7, c14, 0 @ Clean and invalidate whole DCache
-+#endif
-+#endif /*CONFIG_CPU_DCACHE_DISABLE*/
-+
-+#ifndef CONFIG_CPU_ICACHE_DISABLE
-+ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
-+#endif
-+
-+#ifndef CONFIG_CPU_FA_WB_DISABLE
-+ mcr p15, 0, ip, c7, c10, 4 @ drain WB
-+#endif
-+
-+#ifdef CONFIG_CPU_FA_BTB
-+ mcr p15, 0, ip, c7, c5, 6 @ invalidate BTB since mm changed
-+ nop
-+ nop
-+#endif
-+ bic r0, r0, #0xff @ clear bits [7:0]
-+ bic r0, r0, #0x3f00 @ clear bits [13:8]
-+ mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
-+ mcr p15, 0, ip, c8, c7, 0 @ invalidate UTLB
-+ nop
-+ nop
-+ mov pc, lr
-+
-+/*
-+ * cpu_fa526_set_pte_ext(ptep, pte, ext)
-+ *
-+ * Set a PTE and flush it out
-+ */
-+ .align 4
-+ENTRY(cpu_fa526_set_pte_ext)
-+ str r1, [r0], #-2048 @ linux version
-+
-+ eor r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-+
-+ bic r2, r1, #PTE_SMALL_AP_MASK
-+ bic r2, r2, #PTE_TYPE_MASK
-+ orr r2, r2, #PTE_TYPE_SMALL
-+
-+ tst r1, #L_PTE_USER @ User?
-+ orrne r2, r2, #PTE_SMALL_AP_URO_SRW
-+
-+ tst r1, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
-+ orreq r2, r2, #PTE_SMALL_AP_UNO_SRW
-+
-+ tst r1, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
-+ movne r2, #0
-+
-+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-+ eor r3, r2, #0x0a @ C & small page? 1010
-+ tst r3, #0x0b @ 1011
-+ biceq r2, r2, #4
-+#endif
-+ str r2, [r0] @ hardware version
-+
-+ mov r2, #0
-+ mcr p15, 0, r2, c7, c10, 0 @ clean D cache all
-+
-+#ifndef CONFIG_CPU_FA_WB_DISABLE
-+ mcr p15, 0, r2, c7, c10, 4 @ drain WB
-+#endif
-+#ifdef CONFIG_CPU_FA_BTB
-+ mcr p15, 0, r2, c7, c5, 6 @ invalidate BTB
-+ nop
-+ nop
-+#endif
-+ mov pc, lr
-+
-+ __INIT
-+
-+ .type __fa526_setup, #function
-+__fa526_setup:
-+ /* On return of this routine, r0 must carry correct flags for CFG register */
-+ mov r0, #0
-+ mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
-+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
-+ mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
-+
-+ mcr p15, 0, r0, c7, c5, 5 @ invalidate IScratchpad RAM
-+
-+ mov r0, #1
-+ mcr p15, 0, r0, c1, c1, 0 @ turn-on ECR
-+
-+ mrc p15, 0, r0, c9, c1, 0 @ DScratchpad
-+ bic r0, r0, #1
-+ mcr p15, 0, r0, c9, c1, 0
-+ mrc p15, 0, r0, c9, c1, 1 @ IScratchpad
-+ bic r0, r0, #1
-+ mcr p15, 0, r0, c9, c1, 1
-+
-+ mov r0, #0
-+ mcr p15, 0, r0, c1, c1, 0 @ turn-off ECR
-+
-+#ifdef CONFIG_CPU_FA_BTB
-+ mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB All
-+ nop
-+ nop
-+#endif
-+
-+ mov r0, #0x1f @ Domains 0, 1 = manager, 2 = client
-+ mcr p15, 0, r0, c3, c0 @ load domain access register
-+
-+ mrc p15, 0, r0, c1, c0 @ get control register v4
-+ ldr r5, fa526_cr1_clear
-+ bic r0, r0, r5
-+ ldr r5, fa526_cr1_set
-+ orr r0, r0, r5
-+
-+#ifdef CONFIG_CPU_FA_BTB
-+ orr r0, r0, #CR_Z
-+#else
-+ bic r0, r0, #CR_Z
-+#endif
-+#ifdef CONFIG_CPU_FA_WB_DISABLE
-+ mov r12, #0
-+ mcr p15, 0, r12, c7, c10, 4 @ drain write buffer
-+ nop
-+ nop
-+ bic r0, r0, #CR_W @ .... .... .... 1...
-+#else
-+ orr r0, r0, #CR_W
-+#endif
-+
-+ mov pc, lr
-+ .size __fa526_setup, . - __fa526_setup
-+
-+ /*
-+ * .RVI ZFRS BLDP WCAM
-+ * ..11 0001 .111 1101
-+ *
-+ */
-+ .type fa526_cr1_clear, #object
-+ .type fa526_cr1_set, #object
-+fa526_cr1_clear:
-+ .word 0x3f3f
-+fa526_cr1_set:
-+ .word 0x317D
-+
-+ __INITDATA
-+
-+/*
-+ * Purpose : Function pointers used to access above functions - all calls
-+ * come through these
-+ */
-+ .type fa526_processor_functions, #object
-+fa526_processor_functions:
-+ .word v4_early_abort
-+ .word cpu_fa526_proc_init
-+ .word cpu_fa526_proc_fin
-+ .word cpu_fa526_reset
-+ .word cpu_fa526_do_idle
-+ .word cpu_fa526_dcache_clean_area
-+ .word cpu_fa526_switch_mm
-+ .word cpu_fa526_set_pte_ext
-+ .size fa526_processor_functions, . - fa526_processor_functions
-+
-+ .section ".rodata"
-+
-+ .type cpu_arch_name, #object
-+cpu_arch_name:
-+ .asciz "armv4"
-+ .size cpu_arch_name, . - cpu_arch_name
-+
-+ .type cpu_elf_name, #object
-+cpu_elf_name:
-+ .asciz "v4"
-+ .size cpu_elf_name, . - cpu_elf_name
-+
-+ .type cpu_fa526_name, #object
-+cpu_fa526_name:
-+ .ascii "FA526"
-+#ifndef CONFIG_CPU_ICACHE_DISABLE
-+ .ascii "i"
-+#endif
-+#ifndef CONFIG_CPU_DCACHE_DISABLE
-+ .ascii "d"
-+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-+ .ascii "(wt)"
-+#else
-+ .ascii "(wb)"
-+#endif
-+#endif
-+ .ascii "\0"
-+ .size cpu_fa526_name, . - cpu_fa526_name
-+
-+ .align
-+
-+ .section ".proc.info.init", #alloc, #execinstr
-+
-+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-+#define __PMD_SECT_BUFFERABLE 0
-+#else
-+#define __PMD_SECT_BUFFERABLE PMD_SECT_BUFFERABLE
-+#endif
-+
-+ .type __fa526_proc_info,#object
-+__fa526_proc_info:
-+ .long 0x66015261
-+ .long 0xff01fff1
-+ .long PMD_TYPE_SECT | \
-+ __PMD_SECT_BUFFERABLE | \
-+ PMD_SECT_CACHEABLE | \
-+ PMD_BIT4 | \
-+ PMD_SECT_AP_WRITE | \
-+ PMD_SECT_AP_READ
-+ .long PMD_TYPE_SECT | \
-+ PMD_BIT4 | \
-+ PMD_SECT_AP_WRITE | \
-+ PMD_SECT_AP_READ
-+ b __fa526_setup
-+ .long cpu_arch_name
-+ .long cpu_elf_name
-+ .long HWCAP_SWP | HWCAP_HALF
-+ .long cpu_fa526_name
-+ .long fa526_processor_functions
-+ .long fa_tlb_fns
-+ .long fa_user_fns
-+ .long fa_cache_fns
-+ .size __fa526_proc_info, . - __fa526_proc_info
-+
-+
---- /dev/null
-+++ b/arch/arm/mm/tlb-fa.S
-@@ -0,0 +1,96 @@
-+/*
-+ * linux/arch/arm/mm/tlb-fa.S
-+ *
-+ * Copyright (C) 2005 Faraday Corp.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * ARM architecture version 4, Faraday variation.
-+ * This assume an unified TLBs, with a write buffer, and branch target buffer (BTB)
-+ *
-+ * Processors: FA520 FA526 FA626
-+ * 03/31/2005 : Created by Luke Lee, modified from tlb-v4wbi.S
-+ * 05/06/2005 : Fixed buggy CPU versions that did not invalidate the associated
-+ * data cache entries when invalidating TLB entries.
-+ */
-+#include <linux/linkage.h>
-+#include <linux/init.h>
-+#include <asm/asm-offsets.h>
-+#include <asm/tlbflush.h>
-+#include "proc-macros.S"
-+
-+
-+/*
-+ * flush_user_tlb_range(start, end, mm)
-+ *
-+ * Invalidate a range of TLB entries in the specified address space.
-+ *
-+ * - start - range start address
-+ * - end - range end address
-+ * - mm - mm_struct describing address space
-+ */
-+ .align 4
-+ENTRY(fa_flush_user_tlb_range)
-+
-+ vma_vm_mm ip, r2
-+ act_mm r3 @ get current->active_mm
-+ eors r3, ip, r3 @ == mm ?
-+ movne pc, lr @ no, we dont do anything
-+ mov r3, #0
-+
-+#ifndef CONFIG_CPU_FA_WB_DISABLE
-+ mcr p15, 0, r3, c7, c10, 4 @ drain WB
-+#endif
-+
-+ vma_vm_flags r2, r2
-+ bic r0, r0, #0x0ff
-+ bic r0, r0, #0xf00
-+
-+1: mcr p15, 0, r0, c8, c7, 1 @ invalidate UTLB entry
-+ add r0, r0, #PAGE_SZ
-+ cmp r0, r1
-+ bls 1b @ Luke Lee 05/19/2005 blo -> bls
-+
-+#ifdef CONFIG_CPU_FA_BTB
-+ mcr p15, 0, r3, c7, c5, 6 @ invalidate BTB
-+ nop
-+ nop
-+#endif
-+ mov pc, lr
-+
-+
-+ENTRY(fa_flush_kern_tlb_range)
-+ mov r3, #0
-+
-+ mcr p15, 0, r3, c7, c10, 0 @ clean Dcache all 06/03/2005
-+
-+#ifndef CONFIG_CPU_FA_WB_DISABLE
-+ mcr p15, 0, r3, c7, c10, 4 @ drain WB
-+#endif
-+
-+ bic r0, r0, #0x0ff
-+ bic r0, r0, #0xf00
-+1:
-+ mcr p15, 0, r0, c8, c7, 1 @ invalidate UTLB entry
-+ add r0, r0, #PAGE_SZ
-+ cmp r0, r1
-+ bls 1b @ Luke Lee 05/19/2005 blo -> bls
-+
-+#ifdef CONFIG_CPU_FA_BTB
-+ mcr p15, 0, r3, c7, c5, 6 @ invalidate BTB
-+ nop
-+ nop
-+#endif
-+ mov pc, lr
-+
-+
-+ __INITDATA
-+
-+ .type fa_tlb_fns, #object
-+ENTRY(fa_tlb_fns)
-+ .long fa_flush_user_tlb_range
-+ .long fa_flush_kern_tlb_range
-+ .long fa_tlb_flags
-+ .size fa_tlb_fns, . - fa_tlb_fns
---- a/arch/arm/tools/mach-types
-+++ b/arch/arm/tools/mach-types
-@@ -208,7 +208,8 @@ karo ARCH_KARO KARO 190
- fester SA1100_FESTER FESTER 191
- gpi ARCH_GPI GPI 192
- smdk2410 ARCH_SMDK2410 SMDK2410 193
--i519 ARCH_I519 I519 194
-+#i519 ARCH_I519 I519 194
-+sl2312 ARCH_SL2312 SL2312 194
- nexio SA1100_NEXIO NEXIO 195
- bitbox SA1100_BITBOX BITBOX 196
- g200 SA1100_G200 G200 197
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/SL_gpio.h
-@@ -0,0 +1,59 @@
-+#define GPIO_MINOR_LAST 31
-+#define GPIO_MAJOR 120 // Experiemental
-+
-+#define GPIO_IRQ_NBR 12
-+
-+#define GPIOBASEADDR (IO_ADDRESS(0x021000000))
-+
-+#define GPIODATAOUTOFF 0x00
-+#define GPIODATAINOFF 0x04
-+#define GPIOPINDIROFF 0x08
-+#define GPIOPINBYPASSOFF 0x0C
-+#define GPIODATASETOFF 0x10
-+#define GPIODATACLEAROFF 0x14
-+#define GPIOPINPULLENBOFF 0x18
-+#define GPIOPINPULLTPOFF 0x1C
-+#define GPIOINTRENBOFF 0x20
-+#define GPIOINTRRAWSOFF 0x24
-+#define GPIOINTRMASKEDSTATEOFF 0x28
-+#define GPIOINTRMASKOFF 0x2C
-+#define GPIOINTRCLEAROFF 0x30
-+#define GPIOINTRTRIGGEROFF 0x34
-+#define GPIOINTRBOTHOFF 0x38
-+#define GPIOINTRRISENEGOFF 0x3C
-+#define GPIOBNCEENBOFF 0x40
-+#define GPIOBNCEPRESOFF 0x44
-+
-+#define GPIO_IOCTRL_SETDIR 0x20
-+#define GPIO_IOCTRL_SET 0x40
-+#define GPIO_IOCTRL_CLEAR 0x50
-+#define GPIO_IOCTRL_ENBINT 0x60
-+#define GPIO_IOCTRL_MASKINT 0x70
-+#define GPIO_IOCTRL_LVLTRIG 0x75
-+#define GPIO_IOCTRL_EDGINT 0x77
-+#define GPIO_IOCTRL_EDGPOLINT 0x78
-+#define GPIO_IOCTRL_BYPASS 0x30
-+#define GPIO_IOCTRL_PRESCLK 0x80
-+#define GPIO_IOCTRL_CLKVAL 0x90
-+#define GPIO_IOCTRL_PULLENB 0xA0
-+#define GPIO_IOCTRL_PULLTYPE 0xA8
-+
-+
-+#define GPIO_MAJOR 120 /* experimental MAJOR number */
-+ // Minor - 0 : 31 gpio pins
-+
-+#define GPIO_SET 0x01
-+#define GPIO_CLEAR 0x01
-+
-+#define GPIO_INPUT 0
-+#define GPIO_OUTPUT 1
-+#define GPIO_EDGEINTR 0
-+#define GPIO_EDGESINGL 0
-+#define GPIO_EDGEBOTH 1
-+#define GPIO_POSITIVE 0
-+#define GPIO_ENBINT 1
-+#define GPIO_DISABLEMASK 1
-+#define GPIO_PULLDOWN 0
-+#define GPIO_PULLUP 1
-+#define GPIO_ENABLEPULL 1
-+#define GPIO_DISABLEPULL 0
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/debug-macro.S
-@@ -0,0 +1,20 @@
-+/* linux/include/asm-arm/arch-ebsa110/debug-macro.S
-+ *
-+ * Debugging macro include header
-+ *
-+ * Copyright (C) 1994-1999 Russell King
-+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+**/
-+
-+ .macro addruart,rx
-+ mov \rx, #0x42000000
-+ .endm
-+
-+#define UART_SHIFT 2
-+#define FLOW_CONTROL
-+#include <asm/hardware/debug-8250.S>
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/dma.h
-@@ -0,0 +1,28 @@
-+/*
-+ * linux/include/asm-arm/arch-camelot/dma.h
-+ *
-+ * Copyright (C) 1997,1998 Russell King
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#ifndef __ASM_ARCH_DMA_H
-+#define __ASM_ARCH_DMA_H
-+
-+#define MAX_DMA_ADDRESS 0xffffffff
-+
-+#define MAX_DMA_CHANNELS 0
-+
-+#endif /* _ASM_ARCH_DMA_H */
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/entry-macro.S
-@@ -0,0 +1,42 @@
-+/*
-+ * include/asm-arm/arch-arm/entry-macro.S
-+ *
-+ * Low-level IRQ helper macros for ebsa110 platform.
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+#include <asm/arch/platform.h>
-+#include <asm/arch/int_ctrl.h>
-+
-+
-+ .macro disable_fiq
-+ .endm
-+
-+ .macro get_irqnr_preamble, base, tmp
-+ .endm
-+
-+ .macro arch_ret_to_user, tmp1, tmp2
-+ .endm
-+
-+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-+ ldr \irqstat, =IRQ_STATUS(IO_ADDRESS(SL2312_INTERRUPT_BASE))
-+ ldr \irqnr,[\irqstat]
-+ cmp \irqnr,#0
-+ beq 2313f
-+ mov \tmp,\irqnr
-+ mov \irqnr,#0
-+2312:
-+ tst \tmp, #1
-+ bne 2313f
-+ add \irqnr, \irqnr, #1
-+ mov \tmp, \tmp, lsr #1
-+ cmp \irqnr, #31
-+ bcc 2312b
-+2313:
-+ .endm
-+
-+ .macro irq_prio_table
-+ .endm
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/flash.h
-@@ -0,0 +1,83 @@
-+#ifndef __ASM_ARM_ARCH_FLASH_H
-+#define __ASM_ARM_ARCH_FLASH_H
-+
-+#define FLASH_START SL2312_FLASH_BASE
-+#define SFLASH_SIZE 0x00400000
-+#define SPAGE_SIZE 0x200
-+#define BLOCK_ERASE 0x50
-+#define BUFFER1_READ 0x54
-+#define BUFFER2_READ 0x56
-+#define PAGE_ERASE 0x81
-+#define MAIN_MEMORY_PAGE_READ 0x52
-+#define MAIN_MEMORY_PROGRAM_BUFFER1 0x82
-+#define MAIN_MEMORY_PROGRAM_BUFFER2 0x85
-+#define BUFFER1_TO_MAIN_MEMORY 0x83
-+#define BUFFER2_TO_MAIN_MEMORY 0x86
-+#define MAIN_MEMORY_TO_BUFFER1 0x53
-+#define MAIN_MEMORY_TO_BUFFER2 0x55
-+#define BUFFER1_WRITE 0x84
-+#define BUFFER2_WRITE 0x87
-+#define AUTO_PAGE_REWRITE_BUFFER1 0x58
-+#define AUTO_PAGE_REWRITE_BUFFER2 0x59
-+#define READ_STATUS 0x57
-+
-+#define MAIN_MEMORY_PAGE_READ_SPI 0xD2
-+#define BUFFER1_READ_SPI 0xD4
-+#define BUFFER2_READ_SPI 0xD6
-+#define READ_STATUS_SPI 0xD7
-+
-+#define FLASH_ACCESS_OFFSET 0x00000010
-+#define FLASH_ADDRESS_OFFSET 0x00000014
-+#define FLASH_WRITE_DATA_OFFSET 0x00000018
-+#define FLASH_READ_DATA_OFFSET 0x00000018
-+#define SERIAL_FLASH_CHIP1_EN 0x00010000 // 16th bit = 1
-+#define SERIAL_FLASH_CHIP0_EN 0x00000000 // 16th bit = 0
-+#define AT45DB321_PAGE_SHIFT 0xa
-+#define AT45DB642_PAGE_SHIFT 0xb
-+#define CONTINUOUS_MODE 0x00008000
-+
-+#define FLASH_ACCESS_ACTION_OPCODE 0x0000
-+#define FLASH_ACCESS_ACTION_OPCODE_DATA 0x0100
-+#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS 0x0200
-+#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA 0x0300
-+#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_X_DATA 0x0400
-+#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_2X_DATA 0x0500
-+#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_3X_DATA 0x0600
-+#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_4X_DATA 0x0700
-+//#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_X_DATA 0x0600
-+//#define FLASH_ACCESS_ACTION_SHIFT_ADDRESS_4X_DATA 0x0700
-+
-+#define M25P80_PAGE_SIZE 0x100
-+#define M25P80_SECTOR_SIZE 0x10000
-+
-+
-+//#define M25P80_BULK_ERASE 1
-+//#define M25P80_SECTOR_ERASE 2
-+//#define M25P80_SECTOR_SIZE 0x10000
-+
-+#define M25P80_WRITE_ENABLE 0x06
-+#define M25P80_WRITE_DISABLE 0x04
-+#define M25P80_READ_STATUS 0x05
-+#define M25P80_WRITE_STATUS 0x01
-+#define M25P80_READ 0x03
-+#define M25P80_FAST_READ 0x0B
-+#define M25P80_PAGE_PROGRAM 0x02
-+#define M25P80_SECTOR_ERASE 0xD8
-+#define M25P80_BULK_ERASE 0xC7
-+#define FLASH_ERR_OK 0x0
-+
-+extern void address_to_page(__u32, __u16 *, __u16 *);
-+extern void main_memory_page_read(__u8, __u16, __u16, __u8 *);
-+extern void buffer_to_main_memory(__u8, __u16);
-+extern void main_memory_to_buffer(__u8, __u16);
-+extern void main_memory_page_program(__u8, __u16, __u16, __u8);
-+extern void atmel_flash_read_page(__u32, __u8 *, __u32);
-+extern void atmel_erase_page(__u8, __u16);
-+extern void atmel_read_status(__u8, __u8 *);
-+extern void atmel_flash_program_page(__u32, __u8 *, __u32);
-+extern void atmel_buffer_write(__u8, __u16, __u8);
-+extern void flash_delay(void);
-+
-+extern int m25p80_sector_erase(__u32 address, __u32 schip_en);
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/gemini_cir.h
-@@ -0,0 +1,102 @@
-+#ifndef _ASM_ARCH_CIR_H
-+#define _ASM_ARCH_CIR_H
-+#include <linux/ioctl.h>
-+
-+#define VCR_KEY_POWER 0x613E609F
-+#define TV1_KEY_POWER 0x40040100
-+#define TV1_KEY_POWER_EXT 0xBCBD
-+#define RC5_KER_POWER 0x0CF3
-+
-+#define VCC_H_ACT_PER (16-1)
-+#define VCC_L_ACT_PER (8-1)
-+#define VCC_DATA_LEN (32-1)
-+#define TV1_H_ACT_PER (8-1)
-+#define TV1_L_ACT_PER (4-1)
-+#define TV1_DATA_LEN (48-1)
-+
-+#define VCC_BAUD 540
-+#define TV1_BAUD 430
-+#ifdef CONFIG_SL3516_ASIC
-+#define EXT_CLK 60
-+#else
-+#define EXT_CLK 20
-+#endif
-+
-+#define NEC_PROTOCOL 0x0
-+#define RC5_PROTOCOL 0x1
-+#define VCC_PROTOCOL 0x0
-+#define TV1_PROTOCOL 0x01
-+
-+#ifndef SL2312_CIR_BASE
-+#define SL2312_CIR_BASE 0x4C000000
-+#endif
-+#define CIR_BASE_ADDR IO_ADDRESS(SL2312_CIR_BASE)
-+#define STORLINK_CIR_ID 0x00010400
-+
-+#define CIR_IP_ID *(volatile unsigned int *)(CIR_BASE_ADDR + 0x00)
-+#define CIR_CTR_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x04)
-+#define CIR_STATUS_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x08)
-+#define CIR_RX_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x0C)
-+#define CIR_RX_EXT_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x10)
-+#define CIR_PWR_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x14)
-+#define CIR_PWR_EXT_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x18)
-+#define CIR_TX_CTR_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x1C)
-+#define CIR_TX_FEQ_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x20)
-+#define CIR_TX_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x24)
-+#define CIR_TX_EXT_REG *(volatile unsigned int *)(CIR_BASE_ADDR + 0x28)
-+
-+
-+#ifndef SL2312_POWER_CTRL_BASE
-+#define SL2312_POWER_CTRL_BASE 0x4B000000
-+#endif
-+
-+#ifndef PWR_BASE_ADDR
-+#define PWR_BASE_ADDR IO_ADDRESS(SL2312_POWER_CTRL_BASE)
-+#endif
-+#define PWR_CTRL_ID *(unsigned int*)(PWR_BASE_ADDR+0x00)
-+#define PWR_CTRL_REG *(unsigned int*)(PWR_BASE_ADDR+0x04)
-+#define PWR_STATUS_REG *(unsigned int*)(PWR_BASE_ADDR+0x08)
-+
-+
-+#define BIT(x) (1<<x)
-+#define TX_STATUS BIT(3)
-+
-+#define PWR_STAT_CIR 0x10
-+#define PWR_STAT_RTC 0x20
-+#define PWR_STAT_PUSH 0x40
-+#define PWR_SHUTDOWN 0x01
-+
-+#define CARR_FREQ 38000
-+
-+struct cir_ioctl_data {
-+ __u32 data;
-+};
-+struct cir_ioctl_data48 {
-+ __u32 timeout;
-+ __u32 length;
-+ __u8 ret;
-+ __u32 data;
-+ __u32 data_ext;
-+};
-+#define OLD_DATA 0
-+#define NEW_RECEIVE 1
-+
-+#define CIR_IOCTL_BASE ('I'|'R')
-+#define CIR_SET_BAUDRATE _IOW (CIR_IOCTL_BASE, 0, struct cir_ioctl_data)
-+#define CIR_SET_HIGH_PERIOD _IOW (CIR_IOCTL_BASE, 1, struct cir_ioctl_data)
-+#define CIR_SET_LOW_PERIOD _IOW (CIR_IOCTL_BASE, 2, struct cir_ioctl_data)
-+#define CIR_SET_PROTOCOL _IOW (CIR_IOCTL_BASE, 3, struct cir_ioctl_data)
-+#define CIR_SET_ENABLE_COMPARE _IOW (CIR_IOCTL_BASE, 4, struct cir_ioctl_data)
-+#define CIR_SET_ENABLE_DEMOD _IOW (CIR_IOCTL_BASE, 5, struct cir_ioctl_data)
-+#define CIR_SET_POWER_KEY _IOW (CIR_IOCTL_BASE, 6, struct cir_ioctl_data)
-+#define CIR_GET_BAUDRATE _IOR (CIR_IOCTL_BASE, 7, struct cir_ioctl_data)
-+#define CIR_GET_HIGH_PERIOD _IOR (CIR_IOCTL_BASE, 8 ,struct cir_ioctl_data)
-+#define CIR_GET_LOW_PERIOD _IOR (CIR_IOCTL_BASE, 9 ,struct cir_ioctl_data)
-+#define CIR_GET_PROTOCOL _IOR (CIR_IOCTL_BASE, 10, struct cir_ioctl_data)
-+#define CIR_GET_ENABLE_COMPARE _IOR (CIR_IOCTL_BASE, 11, struct cir_ioctl_data)
-+#define CIR_GET_ENABLE_DEMOD _IOR (CIR_IOCTL_BASE, 12, struct cir_ioctl_data)
-+#define CIR_GET_POWER_KEY _IOR (CIR_IOCTL_BASE, 13, struct cir_ioctl_data)
-+#define CIR_GET_DATA _IOWR (CIR_IOCTL_BASE, 14, struct cir_ioctl_data48)
-+#define CIR_WAIT_INT_DATA _IOWR (CIR_IOCTL_BASE, 15, struct cir_ioctl_data48)
-+
-+#endif //_ASM_ARCH_CIR_H
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/gemini_gpio.h
-@@ -0,0 +1,77 @@
-+/*
-+ * FILE NAME gemini_gpio.h
-+ *
-+ * BRIEF MODULE DESCRIPTION
-+ * Generic Gemini GPIO
-+ *
-+ * Author: Storlink Software [Device driver]
-+ * Jason Lee <jason@storlink.com.tw>
-+ *
-+ * Copyright 2005 Storlink Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
-+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
-+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
-+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#ifndef __GEMINI_GPIO_H
-+#define __GEMINI_GPIO_H
-+
-+#include <linux/ioctl.h>
-+
-+#define STATUS_HIGH 1
-+#define STATUS_LOW 0
-+#define DIRECT_OUT 1
-+#define DIRECT_IN 0
-+
-+#define EDGE_TRIG 0
-+#define RISING_EDGE 0
-+#define FALL_EDGE 1
-+#define SINGLE_EDGE 0
-+#define BOTH_EDGE 1
-+
-+#define LEVEL_TRIG 1
-+#define HIGH_ACTIVE 0
-+#define LOW_ACTIVE 1
-+
-+struct gemini_gpio_ioctl_data {
-+ __u32 pin;
-+ __u8 status; // status or pin direction
-+ // 0: status low or Input
-+ // 1: status high or Output
-+
-+ /* these member are used to config GPIO interrupt parameter */
-+ __u8 use_default; // if not sure ,set this argument 1
-+ __u8 trig_type; // 0/1:edge/level triger ?
-+ __u8 trig_polar; // 0/1:rising/falling high/low active ?
-+ __u8 trig_both; // 0/1:single/both detect both ?
-+};
-+
-+#define GEMINI_GPIO_IOCTL_BASE 'Z'
-+
-+#define GEMINI_SET_GPIO_PIN_DIR _IOW (GEMINI_GPIO_IOCTL_BASE,16, struct gemini_gpio_ioctl_data)
-+#define GEMINI_SET_GPIO_PIN_STATUS _IOW (GEMINI_GPIO_IOCTL_BASE,17, struct gemini_gpio_ioctl_data)
-+#define GEMINI_GET_GPIO_PIN_STATUS _IOWR(GEMINI_GPIO_IOCTL_BASE,18, struct gemini_gpio_ioctl_data)
-+#define GEMINI_WAIT_GPIO_PIN_INT _IOWR(GEMINI_GPIO_IOCTL_BASE,19, struct gemini_gpio_ioctl_data)
-+
-+
-+extern void init_gpio_int(__u32 pin,__u8 trig_type,__u8 trig_polar,__u8 trig_both);
-+extern int request_gpio_irq(int bit,void (*handler)(int),char level,char high,char both);
-+extern int free_gpio_irq(int bit);
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/gemini_i2s.h
-@@ -0,0 +1,169 @@
-+#ifndef __GEMINI_I2S_H__
-+#define __GEMINI_I2S_H__
-+#include <linux/ioctl.h>
-+#include <linux/types.h>
-+#include <asm/arch-sl2312/irqs.h>
-+
-+typedef __u16 UINT16;
-+typedef __u32 UINT32;
-+typedef __u8 UINT8;
-+typedef __u8 BOOL;
-+
-+/***************************************/
-+/* define GPIO module base address */
-+/***************************************/
-+#define DMA_CONTROL_PHY_BASE (IO_ADDRESS(SL2312_GENERAL_DMA_BASE))
-+#define DMA_CONTROL_SSP_BASE (IO_ADDRESS(SL2312_SSP_CTRL_BASE))
-+#define SSP_INT IRQ_SSP
-+#define GPIO_BASE_ADDR (IO_ADDRESS(SL2312_GPIO_BASE))
-+#define GPIO_BASE_ADDR1 (IO_ADDRESS(SL2312_GPIO_BASE1))
-+#define GLOBAL_BASE (IO_ADDRESS(SL2312_GLOBAL_BASE))
-+
-+/* define read/write register utility */
-+#define READ_SSP_REG(offset) (__raw_readl(offset+DMA_CONTROL_SSP_BASE))
-+#define WRITE_SSP_REG(offset,val) (__raw_writel(val,offset+DMA_CONTROL_SSP_BASE))
-+
-+#define READ_GPIO_REG(offset) (__raw_readl(offset+GPIO_BASE_ADDR))
-+#define WRITE_GPIO_REG(offset,val) (__raw_writel(val,offset+GPIO_BASE_ADDR))
-+
-+#define READ_GPIO1_REG(offset) (__raw_readl(offset+GPIO_BASE_ADDR1))
-+#define WRITE_GPIO1_REG(offset,val) (__raw_writel(val,offset+GPIO_BASE_ADDR1))
-+
-+#define READ_DMA_REG(offset) (__raw_readl(offset+DMA_CONTROL_PHY_BASE))
-+#define WRITE_DMA_REG(offset,val) (__raw_writel(val,offset+DMA_CONTROL_PHY_BASE))
-+
-+#define READ_GLOBAL_REG(offset) (__raw_readl(offset+GLOBAL_BASE))
-+#define WRITE_GLOBAL_REG(offset,val) (__raw_writel(val,offset+GLOBAL_BASE))
-+
-+#define SSP_GPIO_INT IRQ_GPIO
-+
-+#ifndef CONFIG_SL3516_ASIC
-+#define SSP_GPIO_INT_BIT 0x00000400 //GPIO[10] : SLIC interrupt pin
-+
-+#define GPIO_EECK 0x00000040 /* SCK: GPIO[06] */
-+#define GPIO_EECS 0x00000080 /* SCS: GPIO[07] */
-+#define GPIO_MISO 0x00000200 /* SDO: GPIO[09] receive from 6996*/
-+#define GPIO_MOSI 0x00000100 /* SDI: GPIO[08] send to 6996*/
-+#define GPIO_MISO_BIT 9
-+#else
-+#define SSP_GPIO_INT_BIT 0x00000001 //GPIO[0] : SLIC interrupt pin
-+
-+//#if 0
-+//#define GPIO_EECK 0x80000000 /* SCK: GPIO1[31] */
-+//#define GPIO_EECS 0x40000000 /* SCS: GPIO1[30] */
-+//#define GPIO_MISO 0x20000000 /* SDO: GPIO1[29] receive from 6996*/
-+//#define GPIO_MOSI 0x10000000 /* SDI: GPIO1[28] send to 6996*/
-+//#define GPIO_MISO_BIT 29
-+//#else
-+//#define GPIO_EECK 0x00000100 /* SCK: GPIO1[08] */
-+//#define GPIO_EECS 0x08000000 /* SCS: GPIO1[27] */
-+//#define GPIO_MISO 0x00000080 /* SDO: GPIO1[07] receive from 6996*/
-+//#define GPIO_MOSI 0x00000200 /* SDI: GPIO1[09] send to 6996*/
-+//#define GPIO_MISO_BIT 7
-+//#endif
-+#endif
-+
-+
-+enum GPIO_REG
-+{
-+ GPIO_DATA_OUT = 0x00,
-+ GPIO_DATA_IN = 0x04,
-+ GPIO_PIN_DIR = 0x08,
-+ GPIO_BY_PASS = 0x0c,
-+ GPIO_DATA_SET = 0x10,
-+ GPIO_DATA_CLEAR = 0x14,
-+ GPIO_INT_ENABLE = 0x20,
-+ GPIO_INT_RAWSTATE = 0x24,
-+ GPIO_INT_MASKSTATE = 0x28,
-+ GPIO_INT_MASK = 0x2C,
-+ GPIO_INT_CLEAR = 0x30,
-+ GPIO_INT_TRIGGER = 0x34,
-+ GPIO_INT_BOTH = 0x38,
-+ GPIO_INT_POLARITY = 0x3C
-+};
-+
-+typedef struct
-+{
-+ UINT32 src_addr;
-+ UINT32 dst_addr;
-+ UINT32 llp;
-+ UINT32 ctrl_size;
-+ UINT32 owner;
-+}DMA_LLP_t;
-+
-+typedef struct
-+{
-+ UINT32 owner;
-+ UINT32 src_addr;
-+ UINT32 ctrl_size;
-+}IOCTL_LLP_t;
-+
-+typedef unsigned char byte;
-+typedef unsigned short word;
-+typedef unsigned long dword;
-+
-+/* DMA Registers */
-+#define DMA_INT 0x00000000
-+#define DMA_INT_TC 0x00000004
-+#define DMA_CFG 0x00000024
-+#define DMA_INT_TC_CLR 0x00000008
-+#define DMA_TC 0x00000014
-+#define DMA_CSR 0x00000024
-+#define DMA_SYNC 0x00000028
-+
-+#define DMA_CH2_CSR 0x00000140
-+#define DMA_CH2_CFG 0x00000144
-+#define DMA_CH2_SRC_ADDR 0x00000148
-+#define DMA_CH2_DST_ADDR 0x0000014c
-+#define DMA_CH2_LLP 0x00000150
-+#define DMA_CH2_SIZE 0x00000154
-+
-+#define DMA_CH3_CSR 0x00000160
-+#define DMA_CH3_CFG 0x00000164
-+#define DMA_CH3_SRC_ADDR 0x00000168
-+#define DMA_CH3_DST_ADDR 0x0000016c
-+#define DMA_CH3_LLP 0x00000170
-+#define DMA_CH3_SIZE 0x00000174
-+
-+#define SSP_DEVICE_ID 0x00
-+#define SSP_CTRL_STATUS 0x04
-+#define SSP_FRAME_CTRL 0x08
-+#define SSP_BAUD_RATE 0x0c
-+#define SSP_FRAME_CTRL2 0x10
-+#define SSP_FIFO_CTRL 0x14
-+#define SSP_TX_SLOT_VALID0 0x18
-+#define SSP_TX_SLOT_VALID1 0x1c
-+#define SSP_TX_SLOT_VALID2 0x20
-+#define SSP_TX_SLOT_VALID3 0x24
-+#define SSP_RX_SLOT_VALID0 0x28
-+#define SSP_RX_SLOT_VALID1 0x2c
-+#define SSP_RX_SLOT_VALID2 0x30
-+#define SSP_RX_SLOT_VALID3 0x34
-+#define SSP_SLOT_SIZE0 0x38
-+#define SSP_SLOT_SIZE1 0x3c
-+#define SSP_SLOT_SIZE2 0x40
-+#define SSP_SLOT_SIZE3 0x44
-+#define SSP_READ_PORT 0x48
-+#define SSP_WRITE_PORT 0x4c
-+
-+
-+
-+#define SSP_I2S_INIT_BUF _IO ('q', 0x00)
-+#define SSP_I2S_STOP_DMA _IO ('q', 0x01)
-+#define SSP_I2S_FILE_LEN _IOW ('q', 0x2, int)
-+/*
-+#define SSP_GET_HOOK_STATUS _IOR ('q', 0xC0, int)
-+#define SSP_GET_LINEFEED _IOR ('q', 0xC1, int)
-+#define SSP_SET_LINEFEED _IOW ('q', 0xC2, int)
-+#define SSP_GET_REG _IOWR ('q', 0xC3, struct Ssp_reg *)
-+#define SSP_SET_REG _IOWR ('q', 0xC4, struct Ssp_reg *)
-+#define SSP_GEN_OFFHOOK_TONE _IO ('q', 0xC5)
-+#define SSP_GEN_BUSY_TONE _IO ('q', 0xC6)
-+#define SSP_GEN_RINGBACK_TONE _IO ('q', 0xC7)
-+#define SSP_GEN_CONGESTION_TONE _IO ('q', 0xC8)
-+#define SSP_DISABLE_DIALTONE _IO ('q', 0xC9)
-+#define SSP_PHONE_RING_START _IO ('q', 0xCA)
-+*/
-+
-+
-+#endif //__GEMINI_I2S_H__
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/gemini_ssp.h
-@@ -0,0 +1,263 @@
-+/******************************************************************************
-+ * gemini_ssp.h
-+ *
-+ *
-+ *****************************************************************************/
-+
-+#include <linux/types.h>
-+#include <asm/arch-sl2312/irqs.h>
-+#include <linux/phonedev.h>
-+#include <linux/telephony.h>
-+//#include "proslic.h"
-+
-+typedef __u16 UINT16;
-+typedef __u32 UINT32;
-+typedef __u8 UINT8;
-+typedef __u8 BOOL;
-+
-+#define TRUE 1
-+#define FALSE 0
-+
-+/***************************************/
-+/* define GPIO module base address */
-+/***************************************/
-+#define DMA_CONTROL_PHY_BASE (IO_ADDRESS(SL2312_GENERAL_DMA_BASE))
-+#define DMA_CONTROL_SSP_BASE (IO_ADDRESS(SL2312_SSP_CTRL_BASE))
-+#define SSP_INT IRQ_SSP
-+#define GPIO_BASE_ADDR (IO_ADDRESS(SL2312_GPIO_BASE))
-+#define GPIO_BASE_ADDR1 (IO_ADDRESS(SL2312_GPIO_BASE1))
-+#define GLOBAL_BASE (IO_ADDRESS(SL2312_GLOBAL_BASE))
-+
-+/* define read/write register utility */
-+#define READ_SSP_REG(offset) (__raw_readl(offset+DMA_CONTROL_SSP_BASE))
-+#define WRITE_SSP_REG(offset,val) (__raw_writel(val,offset+DMA_CONTROL_SSP_BASE))
-+
-+#define READ_GPIO_REG(offset) (__raw_readl(offset+GPIO_BASE_ADDR))
-+#define WRITE_GPIO_REG(offset,val) (__raw_writel(val,offset+GPIO_BASE_ADDR))
-+
-+#define READ_GPIO1_REG(offset) (__raw_readl(offset+GPIO_BASE_ADDR1))
-+#define WRITE_GPIO1_REG(offset,val) (__raw_writel(val,offset+GPIO_BASE_ADDR1))
-+
-+#define READ_DMA_REG(offset) (__raw_readl(offset+DMA_CONTROL_PHY_BASE))
-+#define WRITE_DMA_REG(offset,val) (__raw_writel(val,offset+DMA_CONTROL_PHY_BASE))
-+
-+#define READ_GLOBAL_REG(offset) (__raw_readl(offset+GLOBAL_BASE))
-+#define WRITE_GLOBAL_REG(offset,val) (__raw_writel(val,offset+GLOBAL_BASE))
-+
-+
-+#define SSP_GPIO_INT IRQ_GPIO
-+
-+#ifndef CONFIG_SL3516_ASIC
-+#define SSP_GPIO_INT_BIT 0x00000400 //GPIO[10] : SLIC interrupt pin
-+
-+#define GPIO_EECK 0x00000040 /* SCK: GPIO[06] */
-+#define GPIO_EECS 0x00000080 /* SCS: GPIO[07] */
-+#define GPIO_MISO 0x00000200 /* SDO: GPIO[09] receive from 6996*/
-+#define GPIO_MOSI 0x00000100 /* SDI: GPIO[08] send to 6996*/
-+#define GPIO_MISO_BIT 9
-+#else
-+#define SSP_GPIO_INT_BIT 0x00000001 //GPIO[0] : SLIC interrupt pin
-+
-+//#if 0
-+//#define GPIO_EECK 0x80000000 /* SCK: GPIO1[31] */
-+//#define GPIO_EECS 0x40000000 /* SCS: GPIO1[30] */
-+//#define GPIO_MISO 0x20000000 /* SDO: GPIO1[29] receive from 6996*/
-+//#define GPIO_MOSI 0x10000000 /* SDI: GPIO1[28] send to 6996*/
-+//#define GPIO_MISO_BIT 29
-+//#else
-+//#define GPIO_EECK 0x00000100 /* SCK: GPIO1[08] */
-+//#define GPIO_EECS 0x08000000 /* SCS: GPIO1[27] */
-+//#define GPIO_MISO 0x00000080 /* SDO: GPIO1[07] receive from 6996*/
-+//#define GPIO_MOSI 0x00000200 /* SDI: GPIO1[09] send to 6996*/
-+//#define GPIO_MISO_BIT 7
-+//#endif
-+#endif
-+
-+
-+enum GPIO_REG
-+{
-+ GPIO_DATA_OUT = 0x00,
-+ GPIO_DATA_IN = 0x04,
-+ GPIO_PIN_DIR = 0x08,
-+ GPIO_BY_PASS = 0x0c,
-+ GPIO_DATA_SET = 0x10,
-+ GPIO_DATA_CLEAR = 0x14,
-+ GPIO_INT_ENABLE = 0x20,
-+ GPIO_INT_RAWSTATE = 0x24,
-+ GPIO_INT_MASKSTATE = 0x28,
-+ GPIO_INT_MASK = 0x2C,
-+ GPIO_INT_CLEAR = 0x30,
-+ GPIO_INT_TRIGGER = 0x34,
-+ GPIO_INT_BOTH = 0x38,
-+ GPIO_INT_POLARITY = 0x3C
-+};
-+
-+
-+#define SPI_ADD_LEN 7 // bits of Address
-+#define SPI_DAT_LEN 8 // bits of Data
-+
-+
-+
-+//#ifdef MIDWAY_DIAG
-+#define DAISY_MODE 1
-+#if (DAISY_MODE==1)
-+#define NUMBER_OF_CHAN 2
-+#else
-+#define NUMBER_OF_CHAN 1
-+#endif
-+#define LLP_SIZE 8
-+#define SBUF_SIZE 512 //0xff0 //2560
-+#define DBUF_SIZE SBUF_SIZE*NUMBER_OF_CHAN //0xff0 //2560
-+#define TBUF_SIZE (LLP_SIZE)*DBUF_SIZE
-+#define DESC_NUM 1
-+#define DTMF_NUM 20
-+
-+/* define owner bit of SSP */
-+//data into SSP and transfer to AP==> SSP_Rx
-+//data out of SSP and transfer to SLIC==> SSP_Tx
-+#define CPU 0
-+#define DMA 1
-+
-+#define DMA_DEMO 0
-+#define DMA_NDEMO 1
-+//#define DMA_NONE 2
-+
-+enum exceptions {
-+ PROSLICiNSANE,
-+ TIMEoUTpOWERuP,
-+ TIMEoUTpOWERdOWN,
-+ POWERlEAK,
-+ TIPoRrINGgROUNDsHORT,
-+ POWERaLARMQ1,
-+ POWERaLARMQ2,
-+ POWERaLARMQ3,
-+ POWERaLARMQ4,
-+ POWERaLARMQ5,
-+ OWERaLARMQ6,
-+ CM_CAL_ERR
-+};
-+
-+typedef struct
-+{
-+ UINT32 src_addr;
-+ UINT32 dst_addr;
-+ UINT32 llp;
-+ UINT32 ctrl_size;
-+}DMA_LLP_t;
-+
-+typedef struct {
-+ unsigned int own ;
-+ char *tbuf;
-+ //UINT32 *LinkAddrT;
-+ DMA_LLP_t LLPT[LLP_SIZE];
-+}DMA_Tx_t;
-+
-+typedef struct {
-+ unsigned int own ;
-+ char *rbuf;
-+ //UINT32 *LinkAddrR;
-+ DMA_LLP_t LLPR[LLP_SIZE];
-+}DMA_Rx_t;
-+
-+//typedef struct {
-+// //UINT32 init_stat;
-+// struct chipStruct chipData ; /* Represents a proslics state, cached information, and timers */
-+// struct phone_device p;
-+//
-+//
-+//}SSP_SLIC;
-+
-+
-+
-+/* DMA Registers */
-+#define DMA_INT 0x00000000
-+#define DMA_INT_TC 0x00000004
-+#define DMA_CFG 0x00000024
-+#define DMA_INT_TC_CLR 0x00000008
-+#define DMA_TC 0x00000014
-+#define DMA_CSR 0x00000024
-+#define DMA_SYNC 0x00000028
-+
-+#define DMA_CH2_CSR 0x00000140
-+#define DMA_CH2_CFG 0x00000144
-+#define DMA_CH2_SRC_ADDR 0x00000148
-+#define DMA_CH2_DST_ADDR 0x0000014c
-+#define DMA_CH2_LLP 0x00000150
-+#define DMA_CH2_SIZE 0x00000154
-+
-+#define DMA_CH3_CSR 0x00000160
-+#define DMA_CH3_CFG 0x00000164
-+#define DMA_CH3_SRC_ADDR 0x00000168
-+#define DMA_CH3_DST_ADDR 0x0000016c
-+#define DMA_CH3_LLP 0x00000170
-+#define DMA_CH3_SIZE 0x00000174
-+
-+#define SSP_DEVICE_ID 0x00
-+#define SSP_CTRL_STATUS 0x04
-+#define SSP_FRAME_CTRL 0x08
-+#define SSP_BAUD_RATE 0x0c
-+#define SSP_FRAME_CTRL2 0x10
-+#define SSP_FIFO_CTRL 0x14
-+#define SSP_TX_SLOT_VALID0 0x18
-+#define SSP_TX_SLOT_VALID1 0x1c
-+#define SSP_TX_SLOT_VALID2 0x20
-+#define SSP_TX_SLOT_VALID3 0x24
-+#define SSP_RX_SLOT_VALID0 0x28
-+#define SSP_RX_SLOT_VALID1 0x2c
-+#define SSP_RX_SLOT_VALID2 0x30
-+#define SSP_RX_SLOT_VALID3 0x34
-+#define SSP_SLOT_SIZE0 0x38
-+#define SSP_SLOT_SIZE1 0x3c
-+#define SSP_SLOT_SIZE2 0x40
-+#define SSP_SLOT_SIZE3 0x44
-+#define SSP_READ_PORT 0x48
-+#define SSP_WRITE_PORT 0x4c
-+
-+
-+void printFreq_Revision(int num);
-+void SLIC_SPI_write(int num, UINT8 ,UINT8);
-+UINT8 SLIC_SPI_read(int num, UINT8);
-+void SLIC_SPI_write_bit(char);
-+void SLIC_SPI_ind_write(int num, UINT8, UINT16);
-+UINT16 SLIC_SPI_ind_read(int num, UINT8);
-+void SLIC_SPI_CS_enable(UINT8);
-+unsigned int SLIC_SPI_read_bit(void);
-+void SLIC_SPI_pre_st(void);
-+UINT32 ssp_init(void);
-+UINT16 SLIC_SPI_get_identifier(int num);
-+int selfTest(int num);
-+void exception (int num, enum exceptions e);
-+int SLIC_init(int num);
-+UINT8 version(int num);
-+UINT8 chipType (int num);
-+void SLIC_init_ind_reg_set(int num);
-+UINT8 powerUp(int num);
-+UINT8 powerLeakTest(int num);
-+void SLIC_init_reg_set(int num);
-+int calibrate(int num);
-+void goActive(int num);
-+void clearInterrupts(int num);
-+void setState(int num, int);
-+UINT8 loopStatus(int num);
-+int verifyIndirectRegisters(int num);
-+int verifyIndirectReg(int num, UINT8 , UINT16);
-+void sendProSLICID(int num);
-+void disableOscillators(int num);
-+UINT8 checkSum(int num, char * string );
-+void fskInitialization (int num);
-+void fskByte(int num, UINT8 c);
-+void waitForInterrupt (int num);
-+//void findNumber(void);
-+UINT8 dtmfAction(int num);
-+UINT8 digit(int num);
-+void interrupt_init(void);
-+//void gemini_slic_isr (int );
-+int groundShort(int num);
-+void clearAlarmBits(int num);
-+void stopRinging(int num);
-+void activateRinging(int num);
-+void initializeLoopDebounceReg(int num);
-+void busyJapan(int num) ;
-+void ringBackJapan(int num) ;
-+void stateMachine(int num);
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/hardware.h
-@@ -0,0 +1,47 @@
-+/*
-+ * linux/include/asm-arm/arch-epxa10/hardware.h
-+ *
-+ * This file contains the hardware definitions of the Integrator.
-+ *
-+ * Copyright (C) 1999 ARM Limited.
-+ * Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#ifndef __ASM_ARCH_HARDWARE_H
-+#define __ASM_ARCH_HARDWARE_H
-+
-+#include <asm/arch/platform.h>
-+
-+#define pcibios_assign_all_busses() 1
-+
-+/*
-+ * Where in virtual memory the IO devices (timers, system controllers
-+ * and so on)
-+ *
-+ * macro to get at IO space when running virtually
-+*/
-+
-+#define IO_ADDRESS(x) (((x&0xfff00000)>>4)|(x & 0x000fffff)|0xF0000000)
-+#define FLASH_VBASE 0xFE000000
-+#define FLASH_SIZE 0x1000000// 8M
-+#define FLASH_START SL2312_FLASH_BASE
-+#define FLASH_VADDR(x) ((x & 0x00ffffff)|0xFE000000) // flash virtual address
-+
-+#define PCIBIOS_MIN_IO 0x100 // 0x000-0x100 AHB reg and PCI config, data
-+#define PCIBIOS_MIN_MEM 0
-+
-+#endif
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/int_ctrl.h
-@@ -0,0 +1,171 @@
-+/*
-+ *
-+ * This file contains the register definitions for the Excalibur
-+ * Timer TIMER00.
-+ *
-+ * Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifndef __INT_CTRL_H
-+#define __INT_CTRL_H
-+
-+#define PCI_IRQ_OFFSET 64 /* PCI start IRQ number */
-+#define FIQ_OFFSET 32
-+
-+#define IRQ_SOURCE(base_addr) (INT_CTRL_TYPE(base_addr + 0x00))
-+#define IRQ_MASK(base_addr) (INT_CTRL_TYPE (base_addr + 0x04 ))
-+#define IRQ_CLEAR(base_addr) (INT_CTRL_TYPE (base_addr + 0x08 ))
-+#define IRQ_TMODE(base_addr) (INT_CTRL_TYPE (base_addr + 0x0C ))
-+#define IRQ_TLEVEL(base_addr) (INT_CTRL_TYPE (base_addr + 0x10 ))
-+#define IRQ_STATUS(base_addr) (INT_CTRL_TYPE (base_addr + 0x14 ))
-+#define FIQ_SOURCE(base_addr) (INT_CTRL_TYPE (base_addr + 0x20 ))
-+#define FIQ_MASK(base_addr) (INT_CTRL_TYPE (base_addr + 0x24 ))
-+#define FIQ_CLEAR(base_addr) (INT_CTRL_TYPE (base_addr + 0x28 ))
-+#define FIQ_TMODE(base_addr) (INT_CTRL_TYPE (base_addr + 0x2C ))
-+#define FIQ_LEVEL(base_addr) (INT_CTRL_TYPE (base_addr + 0x30 ))
-+#define FIQ_STATUS(base_addr) (INT_CTRL_TYPE (base_addr + 0x34 ))
-+
-+#ifdef CONFIG_SL3516_ASIC
-+#define IRQ_SERIRQ0_OFFSET 30
-+#define IRQ_PCID_OFFSET 29
-+#define IRQ_PCIC_OFFSET 28
-+#define IRQ_PCIB_OFFSET 27
-+#define IRQ_PWR_OFFSET 26
-+#define IRQ_CIR_OFFSET 25
-+#define IRQ_GPIO2_OFFSET 24
-+#define IRQ_GPIO1_OFFSET 23
-+#define IRQ_GPIO_OFFSET 22
-+#define IRQ_SSP_OFFSET 21
-+#define IRQ_LPC_OFFSET 20
-+#define IRQ_LCD_OFFSET 19
-+#define IRQ_UART_OFFSET 18
-+#define IRQ_RTC_OFFSET 17
-+#define IRQ_TIMER3_OFFSET 16
-+#define IRQ_TIMER2_OFFSET 15
-+#define IRQ_TIMER1_OFFSET 14
-+#define IRQ_FLASH_OFFSET 12
-+#define IRQ_USB1_OFFSET 11
-+#define IRQ_USB0_OFFSET 10
-+#define IRQ_DMA_OFFSET 9
-+#define IRQ_PCI_OFFSET 8
-+#define IRQ_IPSEC_OFFSET 7
-+#define IRQ_RAID_OFFSET 6
-+#define IRQ_IDE1_OFFSET 5
-+#define IRQ_IDE0_OFFSET 4
-+#define IRQ_WATCHDOG_OFFSET 3
-+#define IRQ_GMAC1_OFFSET 2
-+#define IRQ_GMAC0_OFFSET 1
-+#define IRQ_CPU0_IP_IRQ_OFFSET 0
-+
-+#define IRQ_SERIRQ0_MASK (1<<30)
-+#define IRQ_PCID_MASK (1<<29)
-+#define IRQ_PCIC_MASK (1<<28)
-+#define IRQ_PCIB_MASK (1<<27)
-+#define IRQ_PWR_MASK (1<<26)
-+#define IRQ_CIR_MASK (1<<25)
-+#define IRQ_GPIO2_MASK (1<<24)
-+#define IRQ_GPIO1_MASK (1<<23)
-+#define IRQ_GPIO_MASK (1<<22)
-+#define IRQ_SSP_MASK (1<<21)
-+#define IRQ_LPC_MASK (1<<20)
-+#define IRQ_LCD_MASK (1<<19)
-+#define IRQ_UART_MASK (1<<18)
-+#define IRQ_RTC_MASK (1<<17)
-+#define IRQ_TIMER3_MASK (1<<16)
-+#define IRQ_TIMER2_MASK (1<<15)
-+#define IRQ_TIMER1_MASK (1<<14)
-+#define IRQ_FLASH_MASK (1<<12)
-+#define IRQ_USB1_MASK (1<<11)
-+#define IRQ_USB0_MASK (1<<10)
-+#define IRQ_DMA_MASK (1<< 9)
-+#define IRQ_PCI_MASK (1<< 8)
-+#define IRQ_IPSEC_MASK (1<< 7)
-+#define IRQ_RAID_MASK (1<< 6)
-+#define IRQ_IDE1_MASK (1<< 5)
-+#define IRQ_IDE0_MASK (1<< 4)
-+#define IRQ_WATCHDOG_MASK (1<< 3)
-+#define IRQ_GMAC1_MASK (1<< 2)
-+#define IRQ_GMAC0_MASK (1<< 1)
-+#define IRQ_CPU0_IP_IRQ_MASK (1<< 0)
-+#else
-+#define IRQ_SERIRQ0_OFFSET 30
-+#define IRQ_PCID_OFFSET 29
-+#define IRQ_PCIC_OFFSET 28
-+#define IRQ_PCIB_OFFSET 27
-+#define IRQ_PWR_OFFSET 26
-+#define IRQ_CIR_OFFSET 25
-+#define IRQ_GPIO2_OFFSET 24
-+#define IRQ_GPIO1_OFFSET 23
-+#define IRQ_GPIO_OFFSET 22
-+#define IRQ_SSP_OFFSET 21
-+#define IRQ_LPC_OFFSET 20
-+#define IRQ_LCD_OFFSET 19
-+#define IRQ_UART_OFFSET 18
-+#define IRQ_RTC_OFFSET 17
-+#define IRQ_TIMER3_OFFSET 16
-+#define IRQ_TIMER2_OFFSET 15
-+#define IRQ_TIMER1_OFFSET 14
-+#define IRQ_FLASH_OFFSET 12
-+#define IRQ_USB1_OFFSET 11
-+#define IRQ_USB0_OFFSET 10
-+#define IRQ_DMA_OFFSET 9
-+#define IRQ_PCI_OFFSET 8
-+#define IRQ_IPSEC_OFFSET 7
-+#define IRQ_RAID_OFFSET 6
-+#define IRQ_IDE1_OFFSET 5
-+#define IRQ_IDE0_OFFSET 4
-+#define IRQ_WATCHDOG_OFFSET 3
-+#define IRQ_GMAC1_OFFSET 2
-+#define IRQ_GMAC0_OFFSET 1
-+#define IRQ_CPU0_IP_IRQ_OFFSET 0
-+
-+#define IRQ_SERIRQ0_MASK (1<<30)
-+#define IRQ_PCID_MASK (1<<29)
-+#define IRQ_PCIC_MASK (1<<28)
-+#define IRQ_PCIB_MASK (1<<27)
-+#define IRQ_PWR_MASK (1<<26)
-+#define IRQ_CIR_MASK (1<<25)
-+#define IRQ_GPIO2_MASK (1<<24)
-+#define IRQ_GPIO1_MASK (1<<23)
-+#define IRQ_GPIO_MASK (1<<22)
-+#define IRQ_SSP_MASK (1<<21)
-+#define IRQ_LPC_MASK (1<<20)
-+#define IRQ_LCD_MASK (1<<19)
-+#define IRQ_UART_MASK (1<<18)
-+#define IRQ_RTC_MASK (1<<17)
-+#define IRQ_TIMER3_MASK (1<<16)
-+#define IRQ_TIMER2_MASK (1<<15)
-+#define IRQ_TIMER1_MASK (1<<14)
-+#define IRQ_FLASH_MASK (1<<12)
-+#define IRQ_USB1_MASK (1<<11)
-+#define IRQ_USB0_MASK (1<<10)
-+#define IRQ_DMA_MASK (1<< 9)
-+#define IRQ_PCI_MASK (1<< 8)
-+#define IRQ_IPSEC_MASK (1<< 7)
-+#define IRQ_RAID_MASK (1<< 6)
-+#define IRQ_IDE1_MASK (1<< 5)
-+#define IRQ_IDE0_MASK (1<< 4)
-+#define IRQ_WATCHDOG_MASK (1<< 3)
-+#define IRQ_GMAC1_MASK (1<< 2)
-+#define IRQ_GMAC0_MASK (1<< 1)
-+#define IRQ_CPU0_IP_IRQ_MASK (1<< 0)
-+#endif
-+
-+
-+#endif /* __INT_CTRL_H */
-+
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/io.h
-@@ -0,0 +1,50 @@
-+/*
-+ * linux/include/asm-arm/arch-epxa10db/io.h
-+ *
-+ * Copyright (C) 1999 ARM Limited
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#ifndef __ASM_ARM_ARCH_IO_H
-+#define __ASM_ARM_ARCH_IO_H
-+
-+#define IO_SPACE_LIMIT 0xffffffff
-+
-+
-+/*
-+ * Generic virtual read/write
-+ */
-+/*
-+#define __arch_getw(a) (*(volatile unsigned short *)(a))
-+#define __arch_putw(v,a) (*(volatile unsigned short *)(a) = (v))
-+*/
-+/*#define outsw __arch_writesw
-+#define outsl __arch_writesl
-+#define outsb __arch_writesb
-+#define insb __arch_readsb
-+#define insw __arch_readsw
-+#define insl __arch_readsl*/
-+
-+#define __io(a) (a)
-+#define __mem_pci(a) (a)
-+/*
-+#define __arch_getw(a) (*(volatile unsigned short *)(a))
-+#define __arch_putw(v,a) (*(volatile unsigned short *)(a) = (v))
-+*/
-+#define iomem_valid_addr(off,size) (1)
-+#define iomem_to_phys(off) (off)
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/ipi.h
-@@ -0,0 +1,189 @@
-+/*
-+ * linux/include/asm-arm/arch-sl2312/system.h
-+ *
-+ * Copyright (C) 1999 ARM Limited
-+ * Copyright (C) 2000 Deep Blue Solutions Ltd
-+ * Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#ifndef __ASM_ARCH_IPI_H
-+#define __ASM_ARCH_IPI_H
-+#include <asm/io.h>
-+
-+//#define spin_lock(x) spin_lock_dt(x)
-+//#define spin_unlock(x) spin_unlock_dt(x)
-+
-+#define SWAP_OFFSET 0x400000
-+#define SWAP_SIZE 0x400000
-+
-+#define SHARE_MEM_ADDR 0x2000000
-+#define SHARE_MEM_SIZE 1024*1024
-+
-+
-+//--> Add by jason for IPI testing
-+// memory layout for maste & slave bin
-+#define MASTERTEXT 0x8000
-+#define SLAVETEXT 0x108000
-+#define SHARESIZE 0x4000
-+#define SHAREADDR SHARE_MEM_ADDR // starting 8M
-+
-+// CPU1 reset release
-+#define GLOBAL_BASE IO_ADDRESS(0x40000000)
-+#define GLOBAL_SOFTRESET (GLOBAL_BASE + 0x0C)
-+#define CPU1_RESET_BIT_MASK 0x40000000
-+
-+// IPI , need to redefine the folliwing, bug
-+#define CPU0_STATUS (GLOBAL_BASE + 0x0038)
-+#define CPU1_STATUS (GLOBAL_BASE + 0x003C)
-+#define CPU_IPI_BIT_MASK 0x80000000
-+
-+/* Your basic SMP spinlocks, allowing only a single CPU anywhere
-+*/
-+typedef struct {
-+ volatile unsigned int lock;
-+} spinlock_dt;
-+
-+
-+#define MASTER_BIT 0x01
-+#define SLAVE_BIT 0x02
-+#define HEART_BIT 0x04
-+#define IPI0_IRQ_BIT 0x08
-+#define IPI0_FIQ_BIT 0x10
-+#define IPI1_IRQ_BIT 0x20
-+#define IPI1_FIQ_BIT 0x40
-+
-+#define IRQ 0
-+#define FIQ 1
-+#define DONE 0xff
-+
-+#define CPU0 0x0
-+#define CPU1 0x1
-+
-+#define MAXCHAR 128*1024
-+typedef struct {
-+ int flag;
-+ int uart_flag;
-+ int cnt;
-+ spinlock_dt lk;
-+ char message[MAXCHAR];
-+}s_mailbox;
-+
-+// JScale proj definition
-+typedef struct {
-+ u16 type; // message Type
-+ u16 length; // message length, including message header
-+} IPC_MSG_HDR_T;
-+
-+typedef struct{
-+ IPC_MSG_HDR_T hdr;
-+ u32 input_location;
-+ u32 input_size;
-+ u32 output_location;
-+ u16 ScaledImageWidth;
-+ u16 ScaledImageHeight;
-+ u8 ScaledImageQuality;
-+ u8 MaintainResultionRatio;
-+ u8 TwoStepScaling;
-+ u8 InputFormat;
-+ u8 verbose;
-+ u8 reserved[3];
-+} JSCALE_REQ_T;
-+
-+typedef struct{
-+ IPC_MSG_HDR_T hdr;
-+ u32 status;
-+ u32 code;
-+ u32 output_size;
-+} JSCALE_RSP_T;
-+
-+#define IPC_JSCALE_REQ_MSG 0 // JScale request from CPU-0 to CPU-1
-+#define IPC_JSCALE_RSP_MSG 1 // JScale response from CPU-1 to CPU-0
-+
-+enum {
-+ JSCALE_STATUS_OK = 0,
-+ JSCALE_UNKNOWN_MSG_TYPE,
-+ JSCALE_FAILED_FILE_SIZE,
-+ JSCALE_FAILED_MALLOC,
-+ JSCALE_FAILED_FORMAT,
-+ JSCALE_DECODE_ERROR,
-+ JSCALE_BUSY,
-+};
-+// <-- JScale
-+
-+#define GEMINI_IPI_IOCTL_BASE 'Z'
-+#define GEMINI_IPI_JSCALE_REQ _IOW (GEMINI_IPI_IOCTL_BASE,0,JSCALE_REQ_T)
-+#define GEMINI_IPI_JSCALE_STAT _IOR (GEMINI_IPI_IOCTL_BASE,1,JSCALE_RSP_T)
-+
-+
-+/*
-+* Simple spin lock operations.
-+*
-+*/
-+
-+#define spin_is_locked_dt(x)((x)->lock != 0)
-+
-+static inline int test_and_set_dt(spinlock_dt *lock)
-+{
-+unsigned long tmp;
-+__asm__ __volatile__(
-+"swp %0, %2, [%1]\n"
-+: "=&r" (tmp)
-+: "r" (&lock->lock), "r" (1)
-+: "cc", "memory");
-+
-+return tmp;
-+}
-+
-+static inline void spin_lock_dt(spinlock_dt *lock)
-+{
-+
-+unsigned long tmp;
-+__asm__ __volatile__(
-+"1: ldr %0, [%1]\n"
-+"teq %0, #0\n"
-+"swpeq %0, %2, [%1]\n"
-+" teqeq %0, #0\n"
-+" bne 1b"
-+ : "=&r" (tmp)
-+ : "r" (&lock->lock), "r" (1)
-+ : "cc", "memory");
-+}
-+
-+static inline void spin_unlock_dt(spinlock_dt *lock)
-+{
-+ __asm__ __volatile__(
-+" str %1, [%0]"
-+ :
-+ : "r" (&lock->lock), "r" (0)
-+ : "cc", "memory");
-+}
-+
-+static inline int getcpuid(void)
-+{
-+ int cpuid;
-+
-+ __asm__(
-+"mrc p8, 0, r0, c0, c0, 0\n"
-+"mov %0, r0"
-+ :"=r"(cpuid)
-+ :
-+ :"r0");
-+ return (cpuid & 0x07);
-+}
-+
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/irq.h
-@@ -0,0 +1,23 @@
-+/*
-+ * linux/include/asm-arm/arch-sl2312/irq.h
-+ *
-+ * Copyright (C) 1999 ARM Limited
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+ // Since we have PCI interrupt which the interrupt line is pseudo
-+ // we need do some fixup
-+int fixup_irq(int irq);
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/irqs.h
-@@ -0,0 +1,102 @@
-+/*
-+ * linux/include/asm-arm/arch-camelot/irqs.h
-+ *
-+ * Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+/* Use the Excalibur chip definitions */
-+#define INT_CTRL_TYPE
-+#include "asm/arch/int_ctrl.h"
-+
-+#ifdef CONFIG_SL3516_ASIC
-+#define IRQ_SERIRQ_MAX 31
-+#define IRQ_SERIRQ1 31
-+#define IRQ_SERIRQ0 30
-+#define IRQ_PCID 29
-+#define IRQ_PCIC 28
-+#define IRQ_PCIB 27
-+#define IRQ_PWR 26
-+#define IRQ_CIR 25
-+#define IRQ_GPIO2 24
-+#define IRQ_GPIO1 23
-+#define IRQ_GPIO 22
-+#define IRQ_SSP 21
-+#define IRQ_LPC 20
-+#define IRQ_LCD 19
-+#define IRQ_UART 18
-+#define IRQ_RTC 17
-+#define IRQ_TIMER3 16
-+#define IRQ_TIMER2 15
-+#define IRQ_TIMER1 14
-+#define IRQ_FLASH 12
-+#define IRQ_USB1 11
-+#define IRQ_USB0 10
-+#define IRQ_DMA 9
-+#define IRQ_PCI 8
-+#define IRQ_IPSEC 7
-+#define IRQ_RAID 6
-+#define IRQ_IDE1 5
-+#define IRQ_IDE0 4
-+#define IRQ_WATCHDOG 3
-+#define IRQ_GMAC1 2
-+#define IRQ_GMAC0 1
-+#define IRQ_CPU0_IP_IRQ 0
-+#else
-+#define IRQ_SERIRQ_MAX 31
-+#define IRQ_SERIRQ1 31
-+#define IRQ_SERIRQ0 30
-+#define IRQ_PCID 29
-+#define IRQ_PCIC 28
-+#define IRQ_PCIB 27
-+#define IRQ_PWR 26
-+#define IRQ_CIR 25
-+#define IRQ_GPIO2 24
-+#define IRQ_GPIO1 23
-+#define IRQ_GPIO 22
-+#define IRQ_SSP 21
-+#define IRQ_LPC 20
-+#define IRQ_LCD 19
-+#define IRQ_UART 18
-+#define IRQ_RTC 17
-+#define IRQ_TIMER3 16
-+#define IRQ_TIMER2 15
-+#define IRQ_TIMER1 14
-+#define IRQ_FLASH 12
-+#define IRQ_USB1 11
-+#define IRQ_USB0 10
-+#define IRQ_DMA 9
-+#define IRQ_PCI 8
-+#define IRQ_IPSEC 7
-+#define IRQ_RAID 6
-+#define IRQ_IDE1 5
-+#define IRQ_IDE0 4
-+#define IRQ_WATCHDOG 3
-+#define IRQ_GMAC1 2
-+#define IRQ_GMAC0 1
-+#endif
-+
-+#define ARCH_TIMER_IRQ IRQ_TIMER2 /* for MV 4.0 */
-+
-+#define IRQ_PCI_INTA PCI_IRQ_OFFSET + 0
-+#define IRQ_PCI_INTB PCI_IRQ_OFFSET + 1
-+#define IRQ_PCI_INTC PCI_IRQ_OFFSET + 2
-+#define IRQ_PCI_INTD PCI_IRQ_OFFSET + 3
-+
-+#define NR_IRQS (IRQ_PCI_INTD + 4)
-+
-+
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/it8712.h
-@@ -0,0 +1,24 @@
-+
-+#ifndef __IT8712_H__
-+#define __IT8712_H__
-+
-+#include "asm/arch/sl2312.h"
-+
-+#define IT8712_IO_BASE SL2312_LPC_IO_BASE
-+// Device LDN
-+#define LDN_SERIAL1 0x01
-+#define LDN_SERIAL2 0x02
-+#define LDN_PARALLEL 0x03
-+#define LDN_KEYBOARD 0x05
-+#define LDN_MOUSE 0x06
-+#define LDN_GPIO 0x07
-+
-+#define IT8712_UART1_PORT 0x3F8
-+#define IT8712_UART2_PORT 0x2F8
-+
-+#define IT8712_GPIO_BASE 0x800 // 0x800-0x804 for GPIO set1-set5
-+
-+void LPCSetConfig(char LdnNumber, char Index, char data);
-+char LPCGetConfig(char LdnNumber, char Index);
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/memory.h
-@@ -0,0 +1,38 @@
-+/*
-+ * linux/include/asm-arm/arch-sl2312/memory.h
-+ *
-+ * Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#ifndef __ASM_ARCH_MMU_H
-+#define __ASM_ARCH_MMU_H
-+
-+/*
-+ * Physical DRAM offset.
-+ */
-+#define PHYS_OFFSET UL(0x00000000)
-+
-+/*
-+ * Virtual view <-> DMA view memory address translations
-+ * virt_to_bus: Used to translate the virtual address to an
-+ * address suitable to be passed to set_dma_addr
-+ * bus_to_virt: Used to convert an address for DMA operations
-+ * to an address that the kernel can use.
-+ */
-+#define __virt_to_bus(x) (x - PAGE_OFFSET + /*SDRAM_BASE*/0)
-+#define __bus_to_virt(x) (x - /*SDRAM_BASE*/0 + PAGE_OFFSET)
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/param.h
-@@ -0,0 +1,20 @@
-+/*
-+ * linux/include/asm-arm/arch-epxa10db/param.h
-+ *
-+ * Copyright (C) 1999 ARM Limited
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/pci.h
-@@ -0,0 +1,18 @@
-+
-+#ifndef __SL2312_PCI_H__
-+#define __SL2312_PCI_H__
-+
-+#define SL2312_PCI_PMC 0x40
-+#define SL2312_PCI_PMCSR 0x44
-+#define SL2312_PCI_CTRL1 0x48
-+#define SL2312_PCI_CTRL2 0x4c
-+#define SL2312_PCI_MEM1_BASE_SIZE 0x50
-+#define SL2312_PCI_MEM2_BASE_SIZE 0x54
-+#define SL2312_PCI_MEM3_BASE_SIZE 0x58
-+
-+
-+void sl2312_pci_mask_irq(unsigned int irq);
-+void sl2312_pci_unmask_irq(unsigned int irq);
-+int sl2312_pci_get_int_src(void);
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/platform.h
-@@ -0,0 +1,7 @@
-+#ifndef PLATFORM_H
-+#define PLATFORM_H
-+#include "sl2312.h"
-+
-+#define MAXIRQNUM 68
-+#endif
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/preempt.h
-@@ -0,0 +1,63 @@
-+/*
-+ * include/asm-arm/arch-sl2312/preempt.h
-+ *
-+ * Timing support for preempt-stats, kfi, ilatency patches
-+ *
-+ * Author: dsingleton <dsingleton@mvista.com>
-+ *
-+ * 2001-2004 (c) MontaVista Software, Inc. This file is licensed under
-+ * the terms of the GNU General Public License version 2. This program
-+ * is licensed "as is" without any warranty of any kind, whether express
-+ * or implied.
-+ */
-+
-+#ifndef _ASM_ARCH_PREEMT_H
-+#define _ASM_ARCH_PREEMT_H
-+
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/sl2312.h>
-+
-+static inline unsigned long clock_diff(unsigned long start, unsigned long stop)
-+{
-+ return (start - stop);
-+}
-+
-+static inline unsigned int readclock(void)
-+{
-+ unsigned int x;
-+
-+ x = readl(IO_ADDRESS(SL2312_TIMER2_BASE));
-+ return x;
-+}
-+
-+static inline unsigned __ticks_per_usec(void)
-+{
-+#ifdef CONFIG_SL3516_ASIC
-+ unsigned int ahb_clock_rate_base=130; /* unit = MHz*/
-+ unsigned int reg_v=0;
-+ unsigned int ticks_usec;
-+
-+ reg_v = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+4)));
-+ reg_v >>=15;
-+ ticks_usec = (ahb_clock_rate_base + (reg_v & 0x07)*10)>>2;
-+
-+#else
-+ unsigned int ticks_usec=20;
-+#endif
-+
-+ return ticks_usec;
-+}
-+
-+/*
-+ * timer 1 runs @ 6Mhz 6 ticks = 1 microsecond
-+ * and is configed as a count down timer.
-+ */
-+#define TICKS_PER_USEC __ticks_per_usec()
-+#define ARCH_PREDEFINES_TICKS_PER_USEC
-+
-+#define clock_to_usecs(x) ((x) / TICKS_PER_USEC)
-+
-+#define INTERRUPTS_ENABLED(x) (!(x & PSR_I_BIT))
-+
-+#endif
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/sl2312.h
-@@ -0,0 +1,254 @@
-+#ifndef __sl2312_h
-+#define __sl2312_h
-+
-+/****************************************************************************
-+ * Copyright Storlink Corp 2002-2003. All rights reserved. *
-+ *--------------------------------------------------------------------------*
-+ * Name:board.s *
-+ * Description: SL231x specfic define *
-+ * Author: Plus Chen *
-+ * Version: 0.9 Create
-+ ****************************************************************************/
-+
-+/*
-+ CPE address map;
-+
-+ +====================================================
-+ 0x00000000 | FLASH
-+ 0x0FFFFFFF |
-+ |====================================================
-+ 0x10000000 | SDRAM
-+ 0x1FFFFFFF |
-+ |====================================================
-+ 0x20000000 | Global Registers 0x20000000-0x20FFFFFF
-+ | EMAC and DMA 0x21000000-0x21FFFFFF
-+ | UART Module 0x22000000-0x22FFFFFF
-+ | Timer Module 0x23000000-0x23FFFFFF
-+ | Interrupt Module 0x24000000-0x24FFFFFF
-+ | RTC Module 0x25000000-0x25FFFFFF
-+ | LPC Host Controller 0x26000000-0x26FFFFFF
-+ | LPC Peripherial IO 0x27000000-0x27FFFFFF
-+ | WatchDog Timer 0x28000000-0x28FFFFFF
-+ 0x2FFFFFFF | Reserved 0x29000000-0x29FFFFFF
-+ |=====================================================
-+ 0x30000000 | PCI IO, Configuration Registers
-+ 0x3FFFFFFF |
-+ |=====================================================
-+ 0x40000000 | PCI Memory
-+ 0x4FFFFFFF |
-+ |=====================================================
-+ 0x50000000 | Ethernet MAC and DMA 0x50000000-0x50FFFFFF
-+ | Security and DMA 0x51000000-0x51FFFFFF
-+ | IDE Channel 0 Register 0x52000000-0x527FFFFF
-+ | IDE Channel 1 Register 0x52800000-0x52FFFFFF
-+ | USB Register 0x53000000-0x53FFFFFF
-+ | Flash Controller 0x54000000-0x54FFFFFF
-+ | DRAM Controller 0x55000000-0x55FFFFFF
-+ 0x5FFFFFFF | Reserved 0x56000000-0x5FFFFFFF
-+ |=====================================================
-+ 0x60000000 | Reserved
-+ 0x6FFFFFFF |
-+ |=====================================================
-+ 0x70000000 | FLASH shadow Memory
-+ 0x7FFFFFFF |
-+ |=====================================================
-+ 0x80000000 | Big Endian of memory 0x00000000-0x7FFFFFFF
-+ 0xFFFFFFFF |
-+ +=====================================================
-+*/
-+
-+
-+
-+/*-------------------------------------------------------------------------------
-+ Memory Map definitions
-+-------------------------------------------------------------------------------- */
-+#define TEST 1
-+#if 0
-+
-+static inline int GETCPUID()
-+{
-+ int cpuid;
-+ __asm__(
-+"mrc p8, 0, r0, c0, c0, 0\n"
-+"mov %0, r0"
-+ :"=r"(cpuid)
-+ :
-+ :"r0");
-+ return (cpuid & 0x07);
-+}
-+#endif
-+#define SL2312_SRAM_BASE 0x70000000 // SRAM base after remap
-+#define SL2312_DRAM_BASE 0x00000000 // DRAM base after remap
-+#define SL2312_RAM_BASE 0x10000000 // RAM code base before remap
-+#define SL2312_FLASH_BASE 0x30000000
-+#define SL2312_ROM_BASE 0x30000000
-+#define SL2312_GLOBAL_BASE 0x40000000
-+#define SL2312_WAQTCHDOG_BASE 0x41000000
-+#define SL2312_UART_BASE 0x42000000
-+#define SL2312_TIMER_BASE 0x43000000
-+#define SL2312_LCD_BASE 0x44000000
-+#define SL2312_RTC_BASE 0x45000000
-+#define SL2312_SATA_BASE 0x46000000
-+#define SL2312_LPC_HOST_BASE 0x47000000
-+#define SL2312_LPC_IO_BASE 0x47800000
-+// #define SL2312_INTERRUPT_BASE 0x48000000
-+#define SL2312_INTERRUPT0_BASE 0x48000000
-+#define SL2312_INTERRUPT1_BASE 0x49000000
-+//#define SL2312_INTERRUPT_BASE ((getcpuid()==0)?SL2312_INTERRUPT0_BASE:SL2312_INTERRUPT1_BASE)
-+#define SL2312_INTERRUPT_BASE 0x48000000
-+#define SL2312_SSP_CTRL_BASE 0x4A000000
-+#define SL2312_POWER_CTRL_BASE 0x4B000000
-+#define SL2312_CIR_BASE 0x4C000000
-+#define SL2312_GPIO_BASE 0x4D000000
-+#define SL2312_GPIO_BASE1 0x4E000000
-+#define SL2312_GPIO_BASE2 0x4F000000
-+#define SL2312_PCI_IO_BASE 0x50000000
-+#define SL2312_PCI_MEM_BASE 0x58000000
-+#ifdef CONFIG_NET_SL351X
-+#define SL2312_TOE_BASE 0x60000000
-+#define SL2312_GMAC0_BASE 0x6000A000
-+#define SL2312_GMAC1_BASE 0x6000E000
-+#else
-+#define SL2312_GMAC0_BASE 0x60000000
-+#define SL2312_GMAC1_BASE 0x61000000
-+#endif
-+#define SL2312_SECURITY_BASE 0x62000000
-+#define SL2312_IDE0_BASE 0x63000000
-+#define SL2312_IDE1_BASE 0x63400000
-+#define SL2312_RAID_BASE 0x64000000
-+#define SL2312_FLASH_CTRL_BASE 0x65000000
-+#define SL2312_DRAM_CTRL_BASE 0x66000000
-+#define SL2312_GENERAL_DMA_BASE 0x67000000
-+#define SL2312_USB_BASE 0x68000000
-+#define SL2312_USB0_BASE 0x68000000
-+#define SL2312_USB1_BASE 0x69000000
-+#define SL2312_FLASH_SHADOW 0x30000000
-+#define SL2312_BIG_ENDIAN_BASE 0x80000000
-+
-+#ifdef CONFIG_GEMINI_IPI
-+#define CPU_1_MEM_BASE 0x4000000 // 64 MB
-+#define CPU_1_DATA_OFFSET 0x4000000-0x300000 // Offset 61 MB
-+#endif
-+
-+#define SL2312_TIMER1_BASE SL2312_TIMER_BASE
-+#define SL2312_TIMER2_BASE (SL2312_TIMER_BASE + 0x10)
-+#define SL2312_TIMER3_BASE (SL2312_TIMER_BASE + 0x20)
-+
-+#define SL2312_PCI_DMA_MEM1_BASE 0x00000000
-+#define SL2312_PCI_DMA_MEM2_BASE 0x00000000
-+#define SL2312_PCI_DMA_MEM3_BASE 0x00000000
-+#define SL2312_PCI_DMA_MEM1_SIZE 7
-+#define SL2312_PCI_DMA_MEM2_SIZE 6
-+#define SL2312_PCI_DMA_MEM3_SIZE 6
-+
-+/*-------------------------------------------------------------------------------
-+ Global Module
-+---------------------------------------------------------------------------------*/
-+#define GLOBAL_ID 0x00
-+#define GLOBAL_CHIP_ID 0x002311
-+#define GLOBAL_CHIP_REV 0xA0
-+#define GLOBAL_STATUS 0x04
-+#define GLOBAL_CONTROL 0x1C
-+#define GLOBAL_REMAP_BIT 0x01
-+#define GLOBAL_RESET_REG 0x0C
-+#define GLOBAL_MISC_REG 0x30
-+#define PFLASH_SHARE_BIT 0x02
-+
-+#define GLOBAL_RESET (1<<31)
-+#define RESET_CPU1 (1<<30)
-+#define RESET_SATA1 (1<<27)
-+#define RESET_SATA0 (1<<26)
-+#define RESET_CIR (1<<25)
-+#define RESET_EXT_DEV (1<<24)
-+#define RESET_WD (1<<23)
-+#define RESET_GPIO2 (1<<22)
-+#define RESET_GPIO1 (1<<21)
-+#define RESET_GPIO0 (1<<20)
-+#define RESET_SSP (1<<19)
-+#define RESET_UART (1<<18)
-+#define RESET_TIMER (1<<17)
-+#define RESET_RTC (1<<16)
-+#define RESET_INT0 (1<<15)
-+#define RESET_INT1 (1<<14)
-+#define RESET_LCD (1<<13)
-+#define RESET_LPC (1<<12)
-+#define RESET_APB (1<<11)
-+#define RESET_DMA (1<<10)
-+#define RESET_USB1 (1<<9 )
-+#define RESET_USB0 (1<<8 )
-+#define RESET_PCI (1<<7 )
-+#define RESET_GMAC1 (1<<6 )
-+#define RESET_GMAC0 (1<<5 )
-+#define RESET_IPSEC (1<<4 )
-+#define RESET_RAID (1<<3 )
-+#define RESET_IDE (1<<2 )
-+#define RESET_FLASH (1<<1 )
-+#define RESET_DRAM (1<<0 )
-+
-+
-+
-+
-+
-+
-+
-+
-+/*-------------------------------------------------------------------------------
-+ DRAM Module
-+---------------------------------------------------------------------------------*/
-+#define DRAM_SIZE_32M 0x2000000
-+#define DRAM_SIZE_64M 0x4000000
-+#define DRAM_SIZE_128M 0x8000000
-+
-+#define DRAM_SIZE DRAM_SIZE_128M
-+
-+#define DRAM_SDRMR 0x00
-+#define SDRMR_DISABLE_DLL 0x80010000
-+
-+/*------------------------------------------------------------------------------
-+ Share Pin Flag
-+--------------------------------------------------------------------------------*/
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+#define FLASH_SHARE_BIT 0
-+#define UART_SHARE_BIT 1
-+#define EMAC_SHARE_BIT 2
-+#define IDE_RW_SHARE_BIT 3
-+#define IDE_CMD_SHARE_BIT 4
-+#endif
-+/*-------------------------------------------------------------------------------
-+ System Clock
-+---------------------------------------------------------------------------------*/
-+
-+#ifndef SYS_CLK
-+#ifdef CONFIG_SL3516_ASIC
-+#define SYS_CLK 150000000
-+#else
-+#define SYS_CLK 20000000
-+#endif
-+#endif
-+
-+#define AHB_CLK SYS_CLK
-+#define MAX_TIMER 3
-+#ifndef APB_CLK
-+#ifdef CONFIG_SL3516_ASIC
-+#define APB_CLK (SYS_CLK / 6)
-+#else
-+#define APB_CLK SYS_CLK
-+#endif
-+#endif
-+
-+#ifdef CONFIG_SL3516_ASIC
-+#define UART_CLK 48000000 // 30000000 for GeminiA chip, else 48000000
-+#else
-+#define UART_CLK 48000000
-+#endif
-+
-+#define SL2312_BAUD_115200 (UART_CLK / 1843200)
-+#define SL2312_BAUD_57600 (UART_CLK / 921600)
-+#define SL2312_BAUD_38400 (UART_CLK / 614400)
-+#define SL2312_BAUD_19200 (UART_CLK / 307200)
-+#define SL2312_BAUD_14400 (UART_CLK / 230400)
-+#define SL2312_BAUD_9600 (UART_CLK / 153600)
-+
-+#endif
-+
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/sl2312_ipsec.h
-@@ -0,0 +1,684 @@
-+#ifndef _IPSEC_DIAG_H
-+#define _IPSEC_DIAG_H
-+
-+#include <linux/scatterlist.h>
-+
-+#define BIG_ENDIAN 0
-+
-+#define IPSEC_TEST 0
-+#define ZERO_COPY 1
-+
-+#define UINT unsigned int
-+#define BYTE unsigned char
-+
-+/* define cipher algorithm */
-+enum CIPHER {
-+ DES_ECB_E =20,
-+ TDES_ECB_E =21,
-+ AES_ECB_E =22,
-+ DES_CBC_E =24,
-+ TDES_CBC_E =25,
-+ AES_CBC_E =26,
-+
-+ DES_ECB_D =27,
-+ TDES_ECB_D =28,
-+ AES_ECB_D =29,
-+ DES_CBC_D =31,
-+ TDES_CBC_D =32,
-+ AES_CBC_D =33,
-+ A_SHA1 =12,
-+ A_HMAC_SHA1 =13,
-+ A_MD5 =14,
-+ A_HMAC_MD5 =15,
-+};
-+
-+// opMode
-+#define CIPHER_ENC 0x1
-+#define CIPHER_DEC 0x3
-+#define AUTH 0x4
-+#define ENC_AUTH 0x5
-+#define AUTH_DEC 0x7
-+
-+// cipherAlgorithm
-+#define CBC_DES 0x4
-+#define CBC_3DES 0x5
-+#define CBC_AES 0x6
-+#define ECB_DES 0x0
-+#define ECB_3DES 0x1
-+#define ECB_AES 0x2
-+
-+// authAlgorithm
-+#define SHA1 0
-+#define MD5 1
-+#define HMAC_SHA1 2
-+#define HMAC_MD5 3
-+#define FCS 4
-+
-+//cipher mode
-+#define ECB 0
-+#define CBC 1
-+
-+// authMode
-+#define AUTH_APPEND 0
-+#define AUTH_CHKVAL 1
-+
-+/******************************************************/
-+/* the offset of IPSEC DMA register */
-+/******************************************************/
-+enum IPSEC_DMA_REGISTER {
-+ IPSEC_DMA_DEVICE_ID = 0xff00,
-+ IPSEC_DMA_STATUS = 0xff04,
-+ IPSEC_TXDMA_CTRL = 0xff08,
-+ IPSEC_TXDMA_FIRST_DESC = 0xff0c,
-+ IPSEC_TXDMA_CURR_DESC = 0xff10,
-+ IPSEC_RXDMA_CTRL = 0xff14,
-+ IPSEC_RXDMA_FIRST_DESC = 0xff18,
-+ IPSEC_RXDMA_CURR_DESC = 0xff1c,
-+ IPSEC_TXDMA_BUF_ADDR = 0xff28,
-+ IPSEC_RXDMA_BUF_ADDR = 0xff38,
-+ IPSEC_RXDMA_BUF_SIZE = 0xff30,
-+};
-+
-+#define IPSEC_STATUS_REG 0x00a8
-+#define IPSEC_RAND_NUM_REG 0x00ac
-+
-+/******************************************************/
-+/* the field definition of IPSEC DMA Module Register */
-+/******************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit2_ff00
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int p_wclk : 4; /* DMA_APB write clock period */
-+ unsigned int p_rclk : 4; /* DMA_APB read clock period */
-+ unsigned int : 8;
-+ unsigned int device_id : 12;
-+ unsigned int revision_id : 4;
-+#else
-+ unsigned int revision_id : 4;
-+ unsigned int device_id : 12;
-+ unsigned int : 8;
-+ unsigned int p_rclk : 4; /* DMA_APB read clock period */
-+ unsigned int p_wclk : 4; /* DMA_APB write clock period */
-+#endif
-+ } bits;
-+} IPSEC_DMA_DEVICE_ID_T;
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit2_ff04
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int ts_finish : 1; /* finished tx interrupt */
-+ unsigned int ts_derr : 1; /* AHB Bus Error while tx */
-+ unsigned int ts_perr : 1; /* Tx Descriptor protocol error */
-+ unsigned int ts_eodi : 1; /* TxDMA end of descriptor interrupt */
-+ unsigned int ts_eofi : 1; /* TxDMA end of frame interrupt */
-+ unsigned int rs_finish : 1; /* finished rx interrupt */
-+ unsigned int rs_derr : 1; /* AHB Bus Error while rx */
-+ unsigned int rs_perr : 1; /* Rx Descriptor protocol error */
-+ unsigned int rs_eodi : 1; /* RxDMA end of descriptor interrupt */
-+ unsigned int rs_eofi : 1; /* RxDMA end of frame interrupt */
-+ unsigned int intr : 8; /* Peripheral interrupt */
-+ unsigned int dma_reset : 1; /* write 1 to this bit will cause DMA HClk domain soft reset */
-+ unsigned int peri_reset : 1; /* write 1 to this bit will cause DMA PClk domain soft reset */
-+ unsigned int : 3;
-+ unsigned int loop_back : 1; /* loopback TxDMA to RxDMA */
-+ unsigned int intr_enable : 8; /* Peripheral Interrupt Enable */
-+#else
-+ unsigned int intr_enable : 8; /* Peripheral Interrupt Enable */
-+ unsigned int loop_back : 1; /* loopback TxDMA to RxDMA */
-+ unsigned int : 3;
-+ unsigned int peri_reset : 1; /* write 1 to this bit will cause DMA PClk domain soft reset */
-+ unsigned int dma_reset : 1; /* write 1 to this bit will cause DMA HClk domain soft reset */
-+ unsigned int intr : 8; /* Peripheral interrupt */
-+ unsigned int rs_eofi : 1; /* RxDMA end of frame interrupt */
-+ unsigned int rs_eodi : 1; /* RxDMA end of descriptor interrupt */
-+ unsigned int rs_perr : 1; /* Rx Descriptor protocol error */
-+ unsigned int rs_derr : 1; /* AHB Bus Error while rx */
-+ unsigned int rs_finish : 1; /* finished rx interrupt */
-+ unsigned int ts_eofi : 1; /* TxDMA end of frame interrupt */
-+ unsigned int ts_eodi : 1; /* TxDMA end of descriptor interrupt */
-+ unsigned int ts_perr : 1; /* Tx Descriptor protocol error */
-+ unsigned int ts_derr : 1; /* AHB Bus Error while tx */
-+ unsigned int ts_finish : 1; /* finished tx interrupt */
-+#endif
-+ } bits;
-+} IPSEC_DMA_STATUS_T;
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit2_ff08
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int td_start : 1; /* Start DMA transfer */
-+ unsigned int td_continue : 1; /* Continue DMA operation */
-+ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
-+ unsigned int : 1;
-+ unsigned int td_prot : 4; /* TxDMA protection control */
-+ unsigned int td_burst_size : 2; /* TxDMA max burst size for every AHB request */
-+ unsigned int td_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */
-+ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */
-+ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */
-+ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */
-+ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */
-+ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */
-+ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */
-+ unsigned int : 14;
-+#else
-+ unsigned int : 14;
-+ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */
-+ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */
-+ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */
-+ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */
-+ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */
-+ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */
-+ unsigned int td_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */
-+ unsigned int td_burst_size : 2; /* TxDMA max burst size for every AHB request */
-+ unsigned int td_prot : 4; /* TxDMA protection control */
-+ unsigned int : 1;
-+ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
-+ unsigned int td_continue : 1; /* Continue DMA operation */
-+ unsigned int td_start : 1; /* Start DMA transfer */
-+#endif
-+ } bits;
-+} IPSEC_TXDMA_CTRL_T;
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit2_ff0c
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int td_first_des_ptr : 28;/* first descriptor address */
-+ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */
-+ unsigned int : 3;
-+#else
-+ unsigned int : 3;
-+ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */
-+ unsigned int td_first_des_ptr : 28;/* first descriptor address */
-+#endif
-+ } bits;
-+} IPSEC_TXDMA_FIRST_DESC_T;
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit2_ff10
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int ndar : 28; /* next descriptor address */
-+ unsigned int eofie : 1; /* end of frame interrupt enable */
-+ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */
-+ unsigned int sof_eof : 2;
-+#else
-+ unsigned int sof_eof : 2;
-+ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */
-+ unsigned int eofie : 1; /* end of frame interrupt enable */
-+ unsigned int ndar : 28; /* next descriptor address */
-+#endif
-+ } bits;
-+} IPSEC_TXDMA_CURR_DESC_T;
-+
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit2_ff14
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int rd_start : 1; /* Start DMA transfer */
-+ unsigned int rd_continue : 1; /* Continue DMA operation */
-+ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
-+ unsigned int : 1;
-+ unsigned int rd_prot : 4; /* DMA protection control */
-+ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */
-+ unsigned int rd_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */
-+ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */
-+ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */
-+ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */
-+ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */
-+ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */
-+ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */
-+ unsigned int : 14;
-+#else
-+ unsigned int : 14;
-+ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */
-+ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */
-+ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */
-+ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */
-+ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */
-+ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */
-+ unsigned int rd_bus : 2; /* peripheral bus width;0 - 8 bits;1 - 16 bits */
-+ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */
-+ unsigned int rd_prot : 4; /* DMA protection control */
-+ unsigned int : 1;
-+ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
-+ unsigned int rd_continue : 1; /* Continue DMA operation */
-+ unsigned int rd_start : 1; /* Start DMA transfer */
-+#endif
-+ } bits;
-+} IPSEC_RXDMA_CTRL_T;
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit2_ff18
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int rd_first_des_ptr : 28;/* first descriptor address */
-+ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */
-+ unsigned int : 3;
-+#else
-+ unsigned int : 3;
-+ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */
-+ unsigned int rd_first_des_ptr : 28;/* first descriptor address */
-+#endif
-+ } bits;
-+} IPSEC_RXDMA_FIRST_DESC_T;
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit2_ff1c
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int ndar : 28; /* next descriptor address */
-+ unsigned int eofie : 1; /* end of frame interrupt enable */
-+ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */
-+ unsigned int sof_eof : 2;
-+#else
-+ unsigned int sof_eof : 2;
-+ unsigned int dec : 1; /* AHB bus address increment(0)/decrement(1) */
-+ unsigned int eofie : 1; /* end of frame interrupt enable */
-+ unsigned int ndar : 28; /* next descriptor address */
-+#endif
-+ } bits;
-+} IPSEC_RXDMA_CURR_DESC_T;
-+
-+
-+
-+/******************************************************/
-+/* the field definition of IPSEC module Register */
-+/******************************************************/
-+typedef union
-+{
-+ unsigned int id;
-+ struct bit_0000
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int device_id : 28;
-+ unsigned int revision_id : 4;
-+#else
-+ unsigned int revision_id : 4;
-+ unsigned int device_id : 28;
-+#endif
-+ } bits;
-+} IPSEC_ID_T;
-+
-+typedef union
-+{
-+ unsigned int control;
-+ struct bit_0004
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int op_mode : 4; /* Operation Mode for the IPSec Module */
-+ unsigned int : 1;
-+ unsigned int cipher_algorithm : 3;
-+ unsigned int aesnk : 4; /* AES Key Size */
-+ unsigned int mix_key_sel : 1; /* 0:use rCipherKey0-3 1:use Key Mixer */
-+ unsigned int : 2;
-+ unsigned int fcs_stream_copy : 1; /* enable authentication stream copy */
-+ unsigned int auth_mode : 1; /* 0-Append or 1-Check Authentication Result */
-+ unsigned int auth_algorithm : 3;
-+ unsigned int : 1;
-+ unsigned int auth_check_len : 3; /* Number of 32-bit words to be check or appended */
-+ /* by the authentication module */
-+ unsigned int process_id : 8; /* Used to identify process.This number will be */
-+ /* copied to the descriptor status of received packet*/
-+#else
-+ unsigned int process_id : 8; /* Used to identify process.This number will be */
-+ /* copied to the descriptor status of received packet*/
-+ unsigned int auth_check_len : 3; /* Number of 32-bit words to be check or appended */
-+ /* by the authentication module */
-+ unsigned int : 1;
-+ unsigned int auth_algorithm : 3;
-+ unsigned int auth_mode : 1; /* 0-Append or 1-Check Authentication Result */
-+ unsigned int fcs_stream_copy : 1; /* enable authentication stream copy */
-+ unsigned int : 2;
-+ unsigned int mix_key_sel : 1; /* 0:use rCipherKey0-3 1:use Key Mixer */
-+ unsigned int aesnk : 4; /* AES Key Size */
-+ unsigned int cipher_algorithm : 3;
-+ unsigned int : 1;
-+ unsigned int op_mode : 4; /* Operation Mode for the IPSec Module */
-+#endif
-+ } bits;
-+} IPSEC_CONTROL_T;
-+
-+
-+typedef union
-+{
-+ unsigned int cipher_packet;
-+ struct bit_0008
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int cipher_header_len : 16; /* The header length to be skipped by the cipher */
-+ unsigned int cipher_algorithm_len : 16; /* The length of message body to be encrypted/decrypted */
-+#else
-+ unsigned int cipher_algorithm_len : 16; /* The length of message body to be encrypted/decrypted */
-+ unsigned int cipher_header_len : 16; /* The header length to be skipped by the cipher */
-+#endif
-+ } bits;
-+} IPSEC_CIPHER_PACKET_T;
-+
-+typedef union
-+{
-+ unsigned int auth_packet;
-+ struct bit_000c
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int auth_header_len : 16; /* The header length that is to be skipped by the authenticator */
-+ unsigned int auth_algorithm_len : 16; /* The length of message body that is to be authenticated */
-+#else
-+ unsigned int auth_algorithm_len : 16; /* The length of message body that is to be authenticated */
-+ unsigned int auth_header_len : 16; /* The header length that is to be skipped by the authenticator */
-+#endif
-+ } bits;
-+} IPSEC_AUTH_PACKET_T;
-+
-+typedef union
-+{
-+ unsigned int status;
-+ struct bit_00a8
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int auth_cmp_rslt : 1; /* Authentication Compare result */
-+ unsigned int wep_crc_ok : 1; /* WEP ICV compare result */
-+ unsigned int tkip_mic_ok : 1; /* TKIP Mic compare result */
-+ unsigned int ccm_mic_ok : 1; /* CCM Mic compare result */
-+ unsigned int : 16;
-+ unsigned int parser_err_code: 4; /* Authentication Compare result */
-+ unsigned int auth_err_code : 4; /* Authentication module error code */
-+ unsigned int cipher_err_code: 4; /* Cipher module erroe code */
-+#else
-+ unsigned int cipher_err_code: 4; /* Cipher module erroe code */
-+ unsigned int auth_err_code : 4; /* Authentication module error code */
-+ unsigned int parser_err_code: 4; /* Authentication Compare result */
-+ unsigned int : 16;
-+ unsigned int ccm_mic_ok : 1; /* CCM Mic compare result */
-+ unsigned int tkip_mic_ok : 1; /* TKIP Mic compare result */
-+ unsigned int wep_crc_ok : 1; /* WEP ICV compare result */
-+ unsigned int auth_cmp_rslt : 1; /* Authentication Compare result */
-+#endif
-+ } bits;
-+} IPSEC_STATUS_T;
-+
-+
-+
-+/************************************************************************/
-+/* IPSec Descriptor Format */
-+/************************************************************************/
-+typedef struct descriptor_t
-+{
-+ union frame_control_t
-+ {
-+ unsigned int bits32;
-+ struct bits_0000
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */
-+ unsigned int derr : 1; /* data error during processing this descriptor */
-+ unsigned int perr : 1; /* protocol error during processing this descriptor */
-+ unsigned int : 1; /* authentication compare result */
-+ unsigned int : 6; /* checksum[15:8] */
-+ unsigned int desc_count : 6; /* number of descriptors used for the current frame */
-+ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/
-+#else
-+ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/
-+ unsigned int desc_count : 6; /* number of descriptors used for the current frame */
-+ unsigned int : 6; /* checksum[15:8] */
-+ unsigned int : 1; /* authentication compare result */
-+ unsigned int perr : 1; /* protocol error during processing this descriptor */
-+ unsigned int derr : 1; /* data error during processing this descriptor */
-+ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */
-+#endif
-+ } bits;
-+ } frame_ctrl;
-+
-+ union flag_status_t
-+ {
-+ unsigned int bits32;
-+ struct bits_0004
-+ {
-+#if (BIG_ENDIAN==1)
-+// unsigned int checksum : 8; /* checksum[7:0] */
-+ unsigned int : 4;
-+ unsigned int auth_result: 1;
-+ unsigned int wep_crc_ok : 1;
-+ unsigned int tkip_mic_ok: 1;
-+ unsigned int ccmp_mic_ok: 1;
-+ unsigned int process_id : 8;
-+ unsigned int frame_count:16;
-+#else
-+ unsigned int frame_count:16;
-+ unsigned int process_id : 8;
-+ unsigned int ccmp_mic_ok: 1;
-+ unsigned int tkip_mic_ok: 1;
-+ unsigned int wep_crc_ok : 1;
-+ unsigned int auth_result: 1;
-+ unsigned int : 4;
-+// unsigned int checksum : 8; /* checksum[7:0] */
-+#endif
-+ } bits_rx_status;
-+
-+ struct bits_0005
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int : 8;
-+ unsigned int process_id : 8;
-+ unsigned int frame_count:16;
-+#else
-+ unsigned int frame_count:16;
-+ unsigned int process_id : 8;
-+ unsigned int : 8;
-+#endif
-+ } bits_tx_status;
-+
-+ struct bits_0006
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int :22;
-+ unsigned int tqflag :10;
-+#else
-+ unsigned int tqflag :10;
-+ unsigned int :22;
-+#endif
-+ } bits_tx_flag;
-+ } flag_status;
-+
-+ unsigned int buf_adr; /* data buffer address */
-+
-+ union next_desc_t
-+ {
-+ unsigned int next_descriptor;
-+ struct bits_000c
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int ndar :28; /* next descriptor address */
-+ unsigned int eofie : 1; /* end of frame interrupt enable */
-+ unsigned int dec : 1; /* AHB bus address. 0-increment; 1-decrement */
-+ unsigned int sof_eof : 2; /* 00-the linking descriptor 01-the last descriptor of a frame*/
-+ /* 10-the first descriptor of a frame 11-only one descriptor for a frame*/
-+#else
-+ unsigned int sof_eof : 2; /* 00-the linking descriptor 01-the last descriptor of a frame*/
-+ /* 10-the first descriptor of a frame 11-only one descriptor for a frame*/
-+ unsigned int dec : 1; /* AHB bus address. 0-increment; 1-decrement */
-+ unsigned int eofie : 1; /* end of frame interrupt enable */
-+ unsigned int ndar :28; /* next descriptor address */
-+#endif
-+ } bits;
-+ } next_desc;
-+} IPSEC_DESCRIPTOR_T;
-+
-+
-+typedef struct IPSEC_S
-+{
-+ unsigned char *tx_bufs;
-+ unsigned char *rx_bufs;
-+ IPSEC_DESCRIPTOR_T *tx_desc; /* point to virtual TX descriptor address*/
-+ IPSEC_DESCRIPTOR_T *rx_desc; /* point to virtual RX descriptor address*/
-+ IPSEC_DESCRIPTOR_T *tx_cur_desc; /* point to current TX descriptor */
-+ IPSEC_DESCRIPTOR_T *rx_cur_desc; /* point to current RX descriptor */
-+ IPSEC_DESCRIPTOR_T *tx_finished_desc;
-+ IPSEC_DESCRIPTOR_T *rx_finished_desc;
-+ dma_addr_t rx_desc_dma; /* physical RX descriptor address */
-+ dma_addr_t tx_desc_dma; /* physical TX descriptor address */
-+ dma_addr_t rx_bufs_dma; /* physical RX descriptor address */
-+ dma_addr_t tx_bufs_dma; /* physical TX descriptor address */
-+} IPSEC_T;
-+
-+
-+/*=====================================================================================================*/
-+/* Data Structure of IPSEC Control Packet */
-+/*=====================================================================================================*/
-+typedef struct IPSEC_ECB_AUTH_S
-+{
-+ IPSEC_CONTROL_T control; /* control parameter */
-+ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */
-+ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter */
-+ unsigned char cipher_key[8*4];
-+ unsigned char auth_check_val[5*4];
-+} IPSEC_ECB_AUTH_T;
-+
-+typedef struct IPSEC_CBC_AUTH_S
-+{
-+ IPSEC_CONTROL_T control; /* control parameter */
-+ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */
-+ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter */
-+ unsigned char cipher_iv[4*4];
-+ unsigned char cipher_key[8*4];
-+ unsigned char auth_check_val[5*4];
-+} IPSEC_CBC_AUTH_T;
-+
-+typedef struct IPSEC_ECB_HMAC_AUTH_S
-+{
-+ IPSEC_CONTROL_T control; /* control parameter */
-+ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */
-+ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter */
-+ unsigned char cipher_key[8*4];
-+ unsigned char auth_key[16*4];
-+ unsigned char auth_check_val[5*4];
-+} IPSEC_ECB_AUTH_HMAC_T;
-+
-+typedef struct IPSEC_CBC_HMAC_AUTH_S
-+{
-+ IPSEC_CONTROL_T control; /* control parameter */
-+ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */
-+ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter */
-+ unsigned char cipher_iv[4*4];
-+ unsigned char cipher_key[8*4];
-+ unsigned char auth_key[16*4];
-+ unsigned char auth_check_val[5*4];
-+} IPSEC_CBC_AUTH_HMAC_T;
-+
-+typedef struct IPSEC_HMAC_AUTH_S
-+{
-+ IPSEC_CONTROL_T control; /* control parameter */
-+ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter */
-+ unsigned char auth_key[16*4];
-+ unsigned char auth_check_val[5*4];
-+} IPSEC_HMAC_AUTH_T;
-+
-+typedef union
-+{
-+ unsigned char auth_pkt[28];
-+
-+ struct IPSEC_AUTH_S
-+ {
-+ IPSEC_CONTROL_T control; /* control parameter(4-byte) */
-+ IPSEC_AUTH_PACKET_T auth; /* authentication packet parameter(4-byte) */
-+ unsigned char auth_check_val[5*4];
-+ } var;
-+} IPSEC_AUTH_T;
-+
-+typedef struct IPSEC_CIPHER_CBC_S
-+{
-+ IPSEC_CONTROL_T control; /* control parameter */
-+ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */
-+ unsigned char cipher_iv[4*4];
-+ unsigned char cipher_key[8*4];
-+} IPSEC_CIPHER_CBC_T;
-+
-+typedef struct IPSEC_CIPHER_ECB_S
-+{
-+ IPSEC_CONTROL_T control; /* control parameter */
-+ IPSEC_CIPHER_PACKET_T cipher; /* cipher packet parameter */
-+ unsigned char cipher_key[8*4];
-+} IPSEC_CIPHER_ECB_T;
-+
-+
-+/****************************************************************************
-+ * Structure Definition *
-+ ****************************************************************************/
-+struct IPSEC_PACKET_S
-+{
-+ unsigned int op_mode; /* CIPHER_ENC(1),CIPHER_DEC(3),AUTH(4),ENC_AUTH(5),AUTH_DEC(7) */
-+ unsigned int cipher_algorithm; /* ECB_DES(0),ECB_3DES(1),ECB_AES(2),CBC_DES(4),CBC_3DES(5),CBC_AES(6) */
-+ unsigned int auth_algorithm; /* SHA1(0),MD5(1),HMAC_SHA1(2),HMAC_MD5(3),FCS(4) */
-+ unsigned int auth_result_mode; /* AUTH_APPEND(0),AUTH_CHKVAL(1) */
-+ unsigned int process_id; /* Used to identify the process */
-+ unsigned int auth_header_len; /* Header length to be skipped by the authenticator */
-+ unsigned int auth_algorithm_len; /* Length of message body that is to be authenticated */
-+ unsigned int cipher_header_len; /* Header length to be skipped by the cipher */
-+ unsigned int cipher_algorithm_len; /* Length of message body to be encrypted or decrypted */
-+ unsigned char iv[16]; /* Initial vector used for DES,3DES,AES */
-+ unsigned int iv_size; /* Initial vector size */
-+ unsigned char auth_key[64]; /* authentication key */
-+ unsigned int auth_key_size; /* authentication key size */
-+ unsigned char cipher_key[32]; /* cipher key */
-+ unsigned int cipher_key_size; /* cipher key size */
-+ struct scatterlist *in_packet; /* input_packet buffer pointer */
-+ //unsigned char *in_packet; /* input_packet buffer pointer */
-+ unsigned int pkt_len; /* input total packet length */
-+ unsigned char auth_checkval[20]; /* Authentication check value/FCS check value */
-+ struct IPSEC_PACKET_S *next,*prev; /* pointer to next/previous operation to perform on buffer */
-+ void (*callback)(struct IPSEC_PACKET_S *); /* function to call when done authentication/cipher */
-+ unsigned char *out_packet; /* output_packet buffer pointer */
-+ //struct scatterlist *out_packet; /* output_packet buffer pointer */
-+ unsigned int out_pkt_len; /* output total packet length */
-+ unsigned int auth_cmp_result; /* authentication compare result */
-+ unsigned int checksum; /* checksum value */
-+ unsigned int status; /* ipsec return status. 0:success, others:fail */
-+#if (IPSEC_TEST == 1)
-+ unsigned char *sw_packet; /* for test only */
-+ unsigned int sw_pkt_len; /* for test only */
-+#endif
-+} ;
-+
-+/*****************************************************************************
-+ * Function : ipsec_crypto_hw_process
-+ * Description : This function processes H/W authentication and cipher.
-+ * Input : op_info - the authentication and cipher information for IPSec module.
-+ * Output : none.
-+ * Return : 0 - success, others - failure.
-+ *****************************************************************************/
-+int ipsec_crypto_hw_process(struct IPSEC_PACKET_S *op_info);
-+
-+int ipsec_get_cipher_algorithm(unsigned char *alg_name,unsigned int alg_mode);
-+int ipsec_get_auth_algorithm(unsigned char *alg_name,unsigned int alg_mode);
-+#if 0
-+void ipsec_sw_authentication(char *data,unsigned int data_len,char *authkey,char authAlgorithm,char *auth_result);
-+void ipsec_sw_cipher(unsigned char *pt,unsigned int pt_len, unsigned char *cipher_key, unsigned int key_size,
-+ unsigned char *iv,unsigned int cipherAlgorithm,unsigned char *ct);
-+void ipsec_sw_auth_cipher(unsigned int op_mode,char *data,unsigned int data_len,
-+ BYTE *auth_key,char authAlgorithm,char *auth_result,
-+ char *pt, unsigned int pt_len,char *cipher_key, int key_size,
-+ char *iv, char cipherAlgorithm,char *ct);
-+#endif
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/sl_random.h
-@@ -0,0 +1,2 @@
-+#define RANDOM_ADD (IO_ADDRESS (0x051000000) + 0x0AC)
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/system.h
-@@ -0,0 +1,54 @@
-+/*
-+ * linux/include/asm-arm/arch-sl2312/system.h
-+ *
-+ * Copyright (C) 1999 ARM Limited
-+ * Copyright (C) 2000 Deep Blue Solutions Ltd
-+ * Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#ifndef __ASM_ARCH_SYSTEM_H
-+#define __ASM_ARCH_SYSTEM_H
-+
-+#include <asm/arch/platform.h>
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/it8712.h>
-+#include <asm/io.h>
-+
-+static void arch_idle(void)
-+{
-+ /*
-+ * This should do all the clock switching
-+ * and wait for interrupt tricks
-+ */
-+ cpu_do_idle();
-+}
-+
-+extern __inline__ void arch_reset(char mode)
-+{
-+ __raw_writel( (int) GLOBAL_RESET|RESET_CPU1, IO_ADDRESS(SL2312_GLOBAL_BASE) + GLOBAL_RESET_REG);
-+}
-+
-+
-+void (*pm_power_off)(void);
-+//{
-+// printk("arch_power_off\n");
-+
-+ // Power off
-+// __raw_writel( (int) 0x00000001, IO_ADDRESS(SL2312_POWER_CTRL_BASE) + 0x04);
-+
-+//}
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/timer.h
-@@ -0,0 +1,53 @@
-+/*
-+ *
-+ * This file contains the register definitions for the Excalibur
-+ * Timer TIMER00.
-+ *
-+ * Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#ifndef __TIMER_H
-+#define __TIMER_H
-+
-+/*
-+ * Register definitions for the timers
-+ */
-+
-+#define TIMER_COUNT(BASE_ADDR) (TIMER_TYPE (BASE_ADDR + 0x00 ))
-+#define TIMER_LOAD(BASE_ADDR) (TIMER_TYPE (BASE_ADDR + 0x04 ))
-+#define TIMER_MATCH1(BASE_ADDR) (TIMER_TYPE (BASE_ADDR + 0x08 ))
-+#define TIMER_MATCH2(BASE_ADDR) (TIMER_TYPE (BASE_ADDR + 0x0C ))
-+#define TIMER_CR(BASE_ADDR) (TIMER_TYPE (BASE_ADDR + 0x30 ))
-+#define TIMER_1_CR_ENABLE_MSK (0x00000001)
-+#define TIMER_1_CR_ENABLE_OFST (0)
-+#define TIMER_1_CR_CLOCK_MSK (0x00000002)
-+#define TIMER_1_CR_CLOCK_OFST (1)
-+#define TIMER_1_CR_INT_MSK (0x00000004)
-+#define TIMER_1_CR_INT_OFST (2)
-+#define TIMER_2_CR_ENABLE_MSK (0x00000008)
-+#define TIMER_2_CR_ENABLE_OFST (3)
-+#define TIMER_2_CR_CLOCK_MSK (0x00000010)
-+#define TIMER_2_CR_CLOCK_OFST (4)
-+#define TIMER_2_CR_INT_MSK (0x00000020)
-+#define TIMER_2_CR_INT_OFST (5)
-+#define TIMER_3_CR_ENABLE_MSK (0x00000040)
-+#define TIMER_3_CR_ENABLE_OFST (6)
-+#define TIMER_3_CR_CLOCK_MSK (0x00000080)
-+#define TIMER_3_CR_CLOCK_OFST (7)
-+#define TIMER_3_CR_INT_MSK (0x00000100)
-+#define TIMER_3_CR_INT_OFST (8)
-+
-+#endif /* __TIMER00_H */
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/timex.h
-@@ -0,0 +1,29 @@
-+/*
-+ * linux/include/asm-arm/arch-epxa10db/timex.h
-+ *
-+ * Excalibur timex specifications
-+ *
-+ * Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+/*
-+ * ??
-+ */
-+#include <asm/arch/sl2312.h>
-+
-+#define CLOCK_TICK_RATE APB_CLK
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/uart.h
-@@ -0,0 +1,100 @@
-+/* *
-+ * Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#ifndef __UART_H
-+#define __UART_H
-+
-+/*
-+ * Register definitions for the UART
-+ */
-+
-+#define UART_TX_FIFO_SIZE (15)
-+
-+#define UART_RBR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x00)) // read
-+#define UART_THR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x00)) // write
-+#define UART_IER(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x04))
-+#define UART_IER_MS (0x08)
-+#define UART_IER_RLS (0x04)
-+#define UART_IER_TE (0x02)
-+#define UART_IER_DR (0x01)
-+#define UART_IIR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x08)) // read
-+#define UART_IIR_NONE (0x01) /* No interrupt pending */
-+#define UART_IIR_RLS (0x06) /* Receive Line Status */
-+#define UART_IIR_DR (0x04) /* Receive Data Ready */
-+#define UART_IIR_TIMEOUT (0x0c) /* Receive Time Out */
-+#define UART_IIR_TE (0x02) /* THR Empty */
-+#define UART_IIR_MODEM (0x00) /* Modem Status */
-+#define UART_FCR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x08)) // write
-+#define UART_FCR_FE (0x01) /* FIFO Enable */
-+#define UART_FCR_RXFR (0x02) /* Rx FIFO Reset */
-+#define UART_FCR_TXFR (0x04) /* Tx FIFO Reset */
-+#define UART_FCR_FIFO_1C (0x00)
-+#define UART_FCR_FIFO_4C (0x40)
-+#define UART_FCR_FIFO_8C (0x80)
-+#define UART_FCR_FIFO_14C (0xC0)
-+#define UART_LCR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x0C))
-+#define UART_LCR_MSK (0x03)
-+#define UART_LCR_LEN5 (0x00)
-+#define UART_LCR_LEN6 (0x01)
-+#define UART_LCR_LEN7 (0x02)
-+#define UART_LCR_LEN8 (0x03)
-+#define UART_LCR_STOP (0x04)
-+#define UART_LCR_EVEN (0x18) /* Even Parity */
-+#define UART_LCR_ODD (0x08) /* Odd Parity */
-+#define UART_LCR_PE (0x08) /* Parity Enable */
-+#define UART_LCR_SETBREAK (0x40) /* Set Break condition */
-+#define UART_LCR_STICKPARITY (0x20) /* Stick Parity Enable */
-+#define UART_LCR_DLAB (0x80) /* Divisor Latch Access Bit */
-+#define UART_MCR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x10))
-+#define UART_MCR_DTR (0x1) /* Data Terminal Ready */
-+#define UART_MCR_RTS (0x2) /* Request to Send */
-+#define UART_MCR_OUT1 (0x4) /* output 1 */
-+#define UART_MCR_OUT2 (0x8) /* output2 or global interrupt enable */
-+#define UART_MCR_LPBK (0x10) /* loopback mode */
-+#define UART_MCR_MASK (0xE3)
-+#define UART_LSR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x14))
-+#define UART_LSR_DR (0x01) /* Data Ready */
-+#define UART_LSR_OE (0x02) /* Overrun Error */
-+#define UART_LSR_PE (0x04) /* Parity Error */
-+#define UART_LSR_FE (0x08) /* Framing Error */
-+#define UART_LSR_BI (0x10) /* Break Interrupt */
-+#define UART_LSR_THRE (0x20) /* THR Empty */
-+#define UART_LSR_TE (0x40) /* Transmitte Empty */
-+#define UART_LSR_DE (0x80) /* FIFO Data Error */
-+#define UART_MSR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x18))
-+#define UART_MSR_DELTACTS (0x01) /* Delta CTS */
-+#define UART_MSR_DELTADSR (0x02) /* Delta DSR */
-+#define UART_MSR_TERI (0x04) /* Trailing Edge RI */
-+#define UART_MSR_DELTACD (0x08) /* Delta CD */
-+#define UART_MSR_CTS (0x10) /* Clear To Send */
-+#define UART_MSR_DSR (0x20) /* Data Set Ready */
-+#define UART_MSR_RI (0x40) /* Ring Indicator */
-+#define UART_MSR_DCD (0x80) /* Data Carrier Detect */
-+#define UART_SPR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x1C))
-+#define UART_DIV_LO(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x0))
-+#define UART_DIV_HI(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x4))
-+#define UART_PSR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x8))
-+#define UART_MDR(BASE_ADDR) (UART_TYPE (BASE_ADDR + 0x20))
-+#define UART_MDR_SERIAL (0x0)
-+
-+#define UART_MSR_DDCD 0x08 /* Delta DCD */
-+#define UART_MSR_DDSR 0x02 /* Delta DSR */
-+#define UART_MSR_DCTS 0x01 /* Delta CTS */
-+#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */
-+
-+
-+#endif /* __UART_H */
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/uncompress.h
-@@ -0,0 +1,94 @@
-+/*
-+ * linux/include/asm-arm/arch-epxa10db/uncompress.h
-+ *
-+ * Copyright (C) 1999 ARM Limited
-+ * Copyright (C) 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#include "asm/arch/platform.h"
-+#include "asm/arch/hardware.h"
-+#define UART_TYPE (volatile unsigned int*)
-+#ifndef CONFIG_SERIAL_IT8712
-+#include "asm/arch/uart.h"
-+#endif
-+extern unsigned int it8712_uart_base;
-+
-+/*
-+ * This does not append a newline
-+ */
-+static void putstr(const char *s)
-+{
-+
-+#ifdef CONFIG_SERIAL_IT8712
-+
-+ unsigned char *base,*status,stat;
-+ int i ;
-+
-+ status = (unsigned char*)it8712_uart_base + 5;
-+ base = (unsigned char*)it8712_uart_base ;
-+
-+ while (*s) {
-+
-+ stat = *status;
-+ while (!(stat&0x20)) { // check status
-+ for(i=0;i<0x10;i++) ;
-+ status = (unsigned char*)it8712_uart_base + 5;
-+ stat = *status ;
-+ }
-+
-+ *base = *s;
-+ barrier();
-+
-+ if (*s == '\n') {
-+ stat = *status;
-+ while (!(stat&0x20)) { // check status
-+ for(i=0;i<0x10;i++) ;
-+ status = (unsigned char*)it8712_uart_base + 5;
-+ stat = *status ;
-+ }
-+
-+ barrier();
-+ *base = '\r';
-+ }
-+ s++;
-+ }
-+
-+#else
-+ while (*s) {
-+ while (!(*UART_LSR(SL2312_UART_BASE) &
-+ UART_LSR_THRE));
-+ barrier();
-+
-+ *UART_THR(SL2312_UART_BASE) = *s;
-+
-+ if (*s == '\n') {
-+ while (!(*UART_LSR(SL2312_UART_BASE) &
-+ UART_LSR_THRE));
-+ barrier();
-+
-+ *UART_THR(SL2312_UART_BASE) = '\r';
-+ }
-+ s++;
-+ }
-+#endif
-+}
-+
-+/*
-+ * nothing to do
-+ */
-+#define arch_decomp_setup()
-+
-+#define arch_decomp_wdog()
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/vmalloc.h
-@@ -0,0 +1,36 @@
-+/*
-+ * linux/include/asm-arm/arch-epxa10db/vmalloc.h
-+ *
-+ * Copyright (C) 2000 Russell King.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+/*
-+ * Just any arbitrary offset to the start of the vmalloc VM area: the
-+ * current 8MB value just means that there will be a 8MB "hole" after the
-+ * physical memory until the kernel virtual memory starts. That means that
-+ * any out-of-bounds memory accesses will hopefully be caught.
-+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
-+ * area for the same reason. ;)
-+ */
-+#define VMALLOC_OFFSET (8*1024*1024)
-+#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
-+#define VMALLOC_VMADDR(x) ((unsigned long)(x))
-+#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
-+
-+//#define MODULE_START (PAGE_OFFSET - 16*1048576)
-+//#define MODULE_END (PAGE_OFFSET)
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/watchdog.h
-@@ -0,0 +1,58 @@
-+#ifndef __WATCHDOG_H
-+#define __WATCHDOG_H
-+
-+#define WATCHDOG_BASE (IO_ADDRESS (SL2312_WAQTCHDOG_BASE))
-+#define WATCHDOG_COUNTER (WATCHDOG_BASE + 0x00)
-+#define WATCHDOG_LOAD (WATCHDOG_BASE + 0x04)
-+#define WATCHDOG_RESTART (WATCHDOG_BASE + 0x08)
-+#define WATCHDOG_CR (WATCHDOG_BASE + 0x0C)
-+#define WATCHDOG_STATUS (WATCHDOG_BASE + 0x10)
-+#define WATCHDOG_CLEAR (WATCHDOG_BASE + 0x14)
-+#define WATCHDOG_INTRLEN (WATCHDOG_BASE + 0x18)
-+
-+#define WATCHDOG_WDENABLE_MSK (0x00000001)
-+#define WATCHDOG_WDENABLE_OFST (0)
-+#define WATCHDOG_WDRST_MSK (0x00000002)
-+#define WATCHDOG_WDRST_OFST (1)
-+#define WATCHDOG_WDINTR_MSK (0x00000004)
-+#define WATCHDOG_WDINTR_OFST (2)
-+#define WATCHDOG_WDEXT_MSK (0x00000008)
-+#define WATCHDOG_WDEXT_OFST (3)
-+#define WATCHDOG_WDCLOCK_MSK (0x00000010)
-+#define WATCHDOG_WDCLOCK_OFST (4)
-+#define WATCHDOG_CR_MASK (0x0000001F)
-+
-+#define WATCHDOG_CLEAR_STATUS 0x1
-+#define WATCHDOG_ENABLE 1
-+#define WATCHDOG_DISABLE 0
-+#define WATCHDOG_RESTART_VALUE 0x5AB9
-+
-+#define WATCHDOG_MINOR 130
-+
-+#define WATCHDOG_IOCTRL_DISABLE 0x01
-+#define WATCHDOG_IOCTRL_SETTIME 0x02
-+#define WATCHDOG_IOCTRL_ENABLE 0x03
-+#define WATCHDOG_IOCTRL_RESTART 0x04
-+
-+#define WATCHDOG_TIMEOUT_SCALE APB_CLK
-+#define WATCHDOG_TIMEOUT_MARGIN 30
-+#define WATCHDOG_DRIVER_OPEN 1
-+#define WATCHDOG_DRIVER_CLOSE 0
-+
-+
-+static void watchdog_disable(void);
-+static void watchdog_enable(void);
-+static int watchdog_open(struct inode *, struct file *);
-+static int watchdog_release(struct inode *, struct file *);
-+static ssize_t watchdog_read(struct file *, char *, size_t, loff_t *);
-+static ssize_t watchdog_write(struct file *, const char *, size_t, loff_t *);
-+static int watchdog_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
-+#ifdef WATCHDOG_TEST
-+static void watchdog_fire(int, void *, struct pt_regs *);
-+#endif
-+
-+
-+
-+
-+
-+#endif
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/xor.h
-@@ -0,0 +1,29 @@
-+/*
-+ * include/asm-arm/arch-sl2312/xor.h
-+ *
-+ * Copyright (C) 2005 Storlink Corp.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef _ASM_ARCH_XOR_H
-+#define _ASM_ARCH_XOR_H
-+
-+/*
-+ * Function prototypes
-+ */
-+void xor_gemini_2(unsigned long bytes, unsigned long *p1, unsigned long *p2);
-+
-+void xor_gemini_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-+ unsigned long *p3);
-+
-+void xor_gemini_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-+ unsigned long *p3, unsigned long *p4);
-+
-+void xor_gemini_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-+ unsigned long *p3, unsigned long *p4, unsigned long *p5);
-+
-+#endif /* _ASM_ARCH_XOR_H */
-+
---- a/include/asm-arm/cacheflush.h
-+++ b/include/asm-arm/cacheflush.h
-@@ -46,6 +46,18 @@
- # define MULTI_CACHE 1
- #endif
-
-+/***********************************************************************
-+ * Storlink SoC -- Cache
-+ ***********************************************************************/
-+#if defined(CONFIG_CPU_FA526)
-+# ifdef _CACHE
-+# define MULTI_CACHE 1
-+# else
-+# define _CACHE fa
-+# endif
-+#endif
-+/***********************************************************************/
-+
- #if defined(CONFIG_CPU_ARM926T)
- # ifdef _CACHE
- # define MULTI_CACHE 1
---- a/include/asm-arm/page.h
-+++ b/include/asm-arm/page.h
-@@ -74,6 +74,18 @@
- # endif
- #endif
-
-+/***********************************************************************
-+ * Storlink SoC -- flash
-+ ***********************************************************************/
-+#ifdef CONFIG_CPU_COPY_FA
-+# ifdef _USER
-+# define MULTI_USER 1
-+# else
-+# define _USER fa
-+# endif
-+#endif
-+/***********************************************************************/
-+
- #ifdef CONFIG_CPU_SA1100
- # ifdef _USER
- # define MULTI_USER 1
---- a/include/asm-arm/proc-fns.h
-+++ b/include/asm-arm/proc-fns.h
-@@ -89,6 +89,14 @@
- # define CPU_NAME cpu_arm922
- # endif
- # endif
-+# ifdef CONFIG_CPU_FA526
-+# ifdef CPU_NAME
-+# undef MULTI_CPU
-+# define MULTI_CPU
-+# else
-+# define CPU_NAME cpu_fa526
-+# endif
-+# endif
- # ifdef CONFIG_CPU_ARM925T
- # ifdef CPU_NAME
- # undef MULTI_CPU
---- a/include/asm-arm/tlbflush.h
-+++ b/include/asm-arm/tlbflush.h
-@@ -39,6 +39,8 @@
- #define TLB_V6_D_ASID (1 << 17)
- #define TLB_V6_I_ASID (1 << 18)
-
-+#define TLB_DINVAL (1 << 28)
-+#define TLB_BTB (1 << 29)
- #define TLB_DCLEAN (1 << 30)
- #define TLB_WB (1 << 31)
-
-@@ -52,6 +54,7 @@
- * v4wb - ARMv4 with write buffer without I TLB flush entry instruction
- * v4wbi - ARMv4 with write buffer with I TLB flush entry instruction
- * v6wbi - ARMv6 with write buffer with I TLB flush entry instruction
-+ * fa - ARMv4 with write buffer with UTLB and branch target buffer (BTB)
- */
- #undef _TLB
- #undef MULTI_TLB
-@@ -86,6 +89,44 @@
- # define v4_always_flags (-1UL)
- #endif
-
-+#ifdef CONFIG_CPU_FA_BTB
-+#define __TLB_BTB TLB_BTB
-+#else
-+#define __TLB_BTB 0
-+#endif
-+
-+#ifdef CONFIG_CPU_FA_WB_DISABLE
-+#define __TLB_WB 0
-+#else
-+#define __TLB_WB TLB_WB
-+#endif
-+
-+/* Fix buggy CPU which doesn't invalidate Dcache properly */
-+#ifdef CONFIG_CPU_FA520
-+#define __TLB_DINVAL TLB_DINVAL
-+#elif defined(CONFIG_CPU_FA526)
-+//#define __TLB_DINVAL TLB_DINVAL
-+#define __TLB_DINVAL 0
-+#else
-+#define __TLB_DINVAL 0
-+#endif
-+
-+#define fa_tlb_flags (__TLB_WB | __TLB_BTB | __TLB_DINVAL | TLB_DCLEAN | \
-+ TLB_V4_U_FULL | TLB_V4_U_PAGE)
-+
-+#ifdef CONFIG_CPU_TLB_FA
-+# define fa_possible_flags fa_tlb_flags
-+# define fa_always_flags fa_tlb_flags
-+# ifdef _TLB
-+# define MULTI_TLB 1
-+# else
-+# define _TLB fa
-+# endif
-+#else
-+# define fa_possible_flags 0
-+# define fa_always_flags (-1UL)
-+#endif
-+
- #define v4wbi_tlb_flags (TLB_WB | TLB_DCLEAN | \
- TLB_V4_I_FULL | TLB_V4_D_FULL | \
- TLB_V4_I_PAGE | TLB_V4_D_PAGE)
-@@ -246,12 +287,14 @@ extern struct cpu_tlb_fns cpu_tlb;
- v4_possible_flags | \
- v4wbi_possible_flags | \
- v4wb_possible_flags | \
-+ fa_possible_flags | \
- v6wbi_possible_flags)
-
- #define always_tlb_flags (v3_always_flags & \
- v4_always_flags & \
- v4wbi_always_flags & \
- v4wb_always_flags & \
-+ fa_always_flags & \
- v6wbi_always_flags)
-
- #define tlb_flag(f) ((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f)))
-@@ -261,6 +304,9 @@ static inline void local_flush_tlb_all(v
- const int zero = 0;
- const unsigned int __tlb_flag = __cpu_tlb_flags;
-
-+ if (tlb_flag(TLB_DINVAL))
-+ asm("mcr%? p15, 0, %0, c7, c14, 0" : : "r" (zero));
-+
- if (tlb_flag(TLB_WB))
- dsb();
-
-@@ -281,6 +327,13 @@ static inline void local_flush_tlb_all(v
- dsb();
- isb();
- }
-+
-+ if (tlb_flag(TLB_BTB))
-+ {
-+ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero));
-+ asm("mov r0, r0" : : );
-+ asm("mov r0, r0" : : );
-+ }
- }
-
- static inline void local_flush_tlb_mm(struct mm_struct *mm)
-@@ -289,6 +342,9 @@ static inline void local_flush_tlb_mm(st
- const int asid = ASID(mm);
- const unsigned int __tlb_flag = __cpu_tlb_flags;
-
-+ if (tlb_flag(TLB_DINVAL))
-+ asm("mcr%? p15, 0, %0, c7, c14, 0" : : "r" (zero));
-+
- if (tlb_flag(TLB_WB))
- dsb();
-
-@@ -317,6 +373,14 @@ static inline void local_flush_tlb_mm(st
- asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
- dsb();
- }
-+
-+ if (tlb_flag(TLB_BTB))
-+ {
-+ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero));
-+ asm("mov r0, r0" : : );
-+ asm("mov r0, r0" : : );
-+ }
-+
- }
-
- static inline void
-@@ -327,6 +391,9 @@ local_flush_tlb_page(struct vm_area_stru
-
- uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm);
-
-+ if (tlb_flag(TLB_DINVAL))
-+ asm("mcr%? p15, 0, %0, c7, c14, 0" : : "r" (zero)); // clean & invalidate data cache all
-+
- if (tlb_flag(TLB_WB))
- dsb();
-
-@@ -357,6 +424,13 @@ local_flush_tlb_page(struct vm_area_stru
- asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
- dsb();
- }
-+
-+ if (tlb_flag(TLB_BTB))
-+ {
-+ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero));
-+ asm("mov r0, r0" : : );
-+ asm("mov r0, r0" : : );
-+ }
- }
-
- static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
-@@ -366,6 +440,9 @@ static inline void local_flush_tlb_kerne
-
- kaddr &= PAGE_MASK;
-
-+ if (tlb_flag(TLB_DINVAL))
-+ asm("mcr%? p15, 0, %0, c7, c14, 0" : : "r" (zero));
-+
- if (tlb_flag(TLB_WB))
- dsb();
-
-@@ -386,6 +463,12 @@ static inline void local_flush_tlb_kerne
- asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc");
- if (tlb_flag(TLB_V6_I_PAGE))
- asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
-+ if (tlb_flag(TLB_BTB))
-+ {
-+ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero));
-+ asm("mov r0, r0" : : );
-+ asm("mov r0, r0" : : );
-+ }
-
- if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
- TLB_V6_I_PAGE | TLB_V6_D_PAGE |
-@@ -412,6 +495,7 @@ static inline void local_flush_tlb_kerne
- */
- static inline void flush_pmd_entry(pmd_t *pmd)
- {
-+ const unsigned int zero = 0;
- const unsigned int __tlb_flag = __cpu_tlb_flags;
-
- if (tlb_flag(TLB_DCLEAN))
-@@ -419,15 +503,30 @@ static inline void flush_pmd_entry(pmd_t
- : : "r" (pmd) : "cc");
- if (tlb_flag(TLB_WB))
- dsb();
-+
-+ if (tlb_flag(TLB_BTB)) // Luke Lee 05/16/2005
-+ {
-+ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero));
-+ asm("mov r0, r0" : : );
-+ asm("mov r0, r0" : : );
-+ }
- }
-
- static inline void clean_pmd_entry(pmd_t *pmd)
- {
-+ const unsigned int zero = 0; // Luke Lee 05/16/2005 ins 1
- const unsigned int __tlb_flag = __cpu_tlb_flags;
-
- if (tlb_flag(TLB_DCLEAN))
- asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd"
- : : "r" (pmd) : "cc");
-+
-+ if (tlb_flag(TLB_BTB)) // Luke Lee 05/16/2005
-+ {
-+ asm("mcr%? p15, 0, %0, c7, c5, 6" : : "r" (zero));
-+ asm("mov r0, r0" : : );
-+ asm("mov r0, r0" : : );
-+ }
- }
-
- #undef tlb_flag
---- a/include/asm-arm/xor.h
-+++ b/include/asm-arm/xor.h
-@@ -139,3 +139,18 @@ static struct xor_block_template xor_blo
- xor_speed(&xor_block_8regs); \
- xor_speed(&xor_block_32regs); \
- } while (0)
-+
-+#ifdef CONFIG_GEMINI_XOR_ACCE
-+#include <asm/arch/xor.h>
-+static struct xor_block_template xor_block_gemini = {
-+ .name = "gemini xor acceleration",
-+ .do_2 = xor_gemini_2,
-+ .do_3 = xor_gemini_3,
-+ .do_4 = xor_gemini_4,
-+ .do_5 = xor_gemini_5,};
-+#undef XOR_TRY_TEMPLATES
-+#define XOR_TRY_TEMPLATES \
-+ do { \
-+ xor_speed(&xor_block_gemini); \
-+ } while (0)
-+#endif
---- a/include/linux/apm_bios.h
-+++ b/include/linux/apm_bios.h
-@@ -217,4 +217,24 @@ extern struct apm_info apm_info;
- #define APM_IOC_STANDBY _IO('A', 1)
- #define APM_IOC_SUSPEND _IO('A', 2)
-
-+// add by jason for power control
-+struct pwc_ioctl_data {
-+ unsigned int action; // sword struct
-+ unsigned int data; // stand shutdown time for PWC_SET_SHUT_TIME
-+ // stand shutdown source for PWC_WAIT_BTN
-+};
-+
-+#define POWEROFF 0x01
-+#define RESTORE_DEFAULT 0x02
-+#define SYSTEM_REBOOT 0x04
-+
-+#define PWR_SRC_CIR 0x10
-+#define PWR_SRC_RTC 0x20
-+#define PWR_SRC_BTN 0x40
-+
-+#define PWC_IOCTL_BASE 'A' // use linux APM ioctl
-+#define PWC_SET_SHUT_TIME _IOW('A', 16, struct pwc_ioctl_data)
-+#define PWC_WAIT_BTN _IOR('A', 17, struct pwc_ioctl_data)
-+#define PWC_SHUTDOWN _IO ('A', 18)
-+
- #endif /* LINUX_APM_H */
---- a/kernel/time.c
-+++ b/kernel/time.c
-@@ -76,6 +76,7 @@ asmlinkage long sys_time(time_t __user *
- * why not move it into the appropriate arch directory (for those
- * architectures that need it).
- */
-+extern void rtc_set_time_second(unsigned int second);
-
- asmlinkage long sys_stime(time_t __user *tptr)
- {
-@@ -87,6 +88,10 @@ asmlinkage long sys_stime(time_t __user
-
- tv.tv_nsec = 0;
-
-+#ifdef CONFIG_SL2312_RTC
-+ rtc_set_time_second(tv.tv_sec);
-+#endif
-+
- err = security_settime(&tv, NULL);
- if (err)
- return err;
diff --git a/target/linux/storm/patches/002-gmac.patch b/target/linux/storm/patches/002-gmac.patch
deleted file mode 100644
index 986a628ac6..0000000000
--- a/target/linux/storm/patches/002-gmac.patch
+++ /dev/null
@@ -1,18615 +0,0 @@
---- /dev/null
-+++ b/drivers/net/sl2312_emac.c
-@@ -0,0 +1,4604 @@
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/compiler.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/ioport.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/rtnetlink.h>
-+#include <linux/delay.h>
-+#include <linux/ethtool.h>
-+#include <linux/mii.h>
-+#include <linux/completion.h>
-+#include <asm/hardware.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/semaphore.h>
-+#include <asm/arch-sl2312/irqs.h>
-+#include <asm/arch/it8712.h>
-+#include <asm/arch/sl2312.h>
-+#include <linux/mtd/kvctl.h>
-+#include <linux/sysctl_storlink.h>
-+
-+#define BIG_ENDIAN 0
-+
-+#define GMAC_DEBUG 0
-+
-+#define GMAC_PHY_IF 2
-+
-+/* define PHY address */
-+#define HPHY_ADDR 0x01
-+#define GPHY_ADDR 0x02
-+
-+#define CONFIG_ADM_6999 1
-+/* define chip information */
-+#define DRV_NAME "SL2312"
-+#define DRV_VERSION "0.1.1"
-+#define SL2312_DRIVER_NAME DRV_NAME " Fast Ethernet driver " DRV_VERSION
-+
-+/* define TX/RX descriptor parameter */
-+#define MAX_ETH_FRAME_SIZE 1920
-+#define TX_BUF_SIZE MAX_ETH_FRAME_SIZE
-+#define TX_DESC_NUM 128
-+#define TX_BUF_TOT_LEN (TX_BUF_SIZE * TX_DESC_NUM)
-+#define RX_BUF_SIZE MAX_ETH_FRAME_SIZE
-+#define RX_DESC_NUM 256
-+#define RX_BUF_TOT_LEN (RX_BUF_SIZE * RX_DESC_NUM)
-+#define MAX_ISR_WORK 20
-+
-+unsigned int int_status = 0;
-+
-+/* define GMAC base address */
-+#define GMAC_PHYSICAL_BASE_ADDR (SL2312_GMAC_BASE)
-+#define GMAC_BASE_ADDR (IO_ADDRESS(GMAC_PHYSICAL_BASE_ADDR))
-+#define GMAC_GLOBAL_BASE_ADDR (IO_ADDRESS(SL2312_GLOBAL_BASE))
-+
-+#define GMAC0_BASE (IO_ADDRESS(SL2312_GMAC0_BASE))
-+#define GMAC1_BASE (IO_ADDRESS(SL2312_GMAC1_BASE))
-+
-+/* memory management utility */
-+#define DMA_MALLOC(size,handle) pci_alloc_consistent(NULL,size,handle)
-+#define DMA_MFREE(mem,size,handle) pci_free_consistent(NULL,size,mem,handle)
-+
-+//#define gmac_read_reg(offset) (readl(GMAC_BASE_ADDR + offset))
-+//#define gmac_write_reg(offset,data,mask) writel( (gmac_read_reg(offset)&~mask) |(data&mask),(GMAC_BASE_ADDR+offset))
-+
-+/* define owner bit */
-+#define CPU 0
-+#define DMA 1
-+
-+#define ACTIVE 1
-+#define NONACTIVE 0
-+
-+#define CONFIG_SL_NAPI
-+
-+#ifndef CONFIG_SL2312_MPAGE
-+#define CONFIG_SL2312_MPAGE
-+#endif
-+
-+#ifdef CONFIG_SL2312_MPAGE
-+#include <linux/skbuff.h>
-+#include <linux/ip.h>
-+#include <linux/tcp.h>
-+#endif
-+
-+#ifndef CONFIG_TXINT_DISABLE
-+//#define CONFIG_TXINT_DISABLE
-+#endif
-+
-+enum phy_state
-+{
-+ LINK_DOWN = 0,
-+ LINK_UP = 1
-+};
-+
-+
-+/* transmit timeout value */
-+#define TX_TIMEOUT (6*HZ)
-+
-+/***************************************/
-+/* the offset address of GMAC register */
-+/***************************************/
-+enum GMAC_REGISTER {
-+ GMAC_STA_ADD0 = 0x0000,
-+ GMAC_STA_ADD1 = 0x0004,
-+ GMAC_STA_ADD2 = 0x0008,
-+ GMAC_RX_FLTR = 0x000c,
-+ GMAC_MCAST_FIL0 = 0x0010,
-+ GMAC_MCAST_FIL1 = 0x0014,
-+ GMAC_CONFIG0 = 0x0018,
-+ GMAC_CONFIG1 = 0x001c,
-+ GMAC_CONFIG2 = 0x0020,
-+ GMAC_BNCR = 0x0024,
-+ GMAC_RBNR = 0x0028,
-+ GMAC_STATUS = 0x002c,
-+ GMAC_IN_DISCARDS= 0x0030,
-+ GMAC_IN_ERRORS = 0x0034,
-+ GMAC_IN_MCAST = 0x0038,
-+ GMAC_IN_BCAST = 0x003c,
-+ GMAC_IN_MAC1 = 0x0040,
-+ GMAC_IN_MAC2 = 0x0044
-+};
-+
-+/*******************************************/
-+/* the offset address of GMAC DMA register */
-+/*******************************************/
-+enum GMAC_DMA_REGISTER {
-+ GMAC_DMA_DEVICE_ID = 0xff00,
-+ GMAC_DMA_STATUS = 0xff04,
-+ GMAC_TXDMA_CTRL = 0xff08,
-+ GMAC_TXDMA_FIRST_DESC = 0xff0c,
-+ GMAC_TXDMA_CURR_DESC = 0xff10,
-+ GMAC_RXDMA_CTRL = 0xff14,
-+ GMAC_RXDMA_FIRST_DESC = 0xff18,
-+ GMAC_RXDMA_CURR_DESC = 0xff1c,
-+};
-+
-+/*******************************************/
-+/* the register structure of GMAC */
-+/*******************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit1_0004
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int sta_add2_l16 : 16; /* station MAC address2 bits 15 to 0 */
-+ unsigned int sta_add1_h16 : 16; /* station MAC address1 bits 47 to 32 */
-+#else
-+ unsigned int sta_add1_h16 : 16; /* station MAC address1 bits 47 to 32 */
-+ unsigned int sta_add2_l16 : 16; /* station MAC address2 bits 15 to 0 */
-+#endif
-+ } bits;
-+} GMAC_STA_ADD1_T;
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit1_000c
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int : 27;
-+ unsigned int error : 1; /* enable receive of all error frames */
-+ unsigned int promiscuous : 1; /* enable receive of all frames */
-+ unsigned int broadcast : 1; /* enable receive of broadcast frames */
-+ unsigned int multicast : 1; /* enable receive of multicast frames that pass multicast filter */
-+ unsigned int unicast : 1; /* enable receive of unicast frames that are sent to STA address */
-+#else
-+ unsigned int unicast : 1; /* enable receive of unicast frames that are sent to STA address */
-+ unsigned int multicast : 1; /* enable receive of multicast frames that pass multicast filter */
-+ unsigned int broadcast : 1; /* enable receive of broadcast frames */
-+ unsigned int promiscuous : 1; /* enable receive of all frames */
-+ unsigned int error : 1; /* enable receive of all error frames */
-+ unsigned int : 27;
-+#endif
-+ } bits;
-+} GMAC_RX_FLTR_T;
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit1_0018
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int : 10;
-+ unsigned int inv_rx_clk : 1; /* Inverse RX Clock */
-+ unsigned int rising_latch : 1;
-+ unsigned int rx_tag_remove : 1; /* Remove Rx VLAN tag */
-+ unsigned int ipv6_tss_rx_en : 1; /* IPv6 TSS RX enable */
-+ unsigned int ipv4_tss_rx_en : 1; /* IPv4 TSS RX enable */
-+ unsigned int rgmii_en : 1; /* RGMII in-band status enable */
-+ unsigned int tx_fc_en : 1; /* TX flow control enable */
-+ unsigned int rx_fc_en : 1; /* RX flow control enable */
-+ unsigned int sim_test : 1; /* speed up timers in simulation */
-+ unsigned int dis_col : 1; /* disable 16 collisions abort function */
-+ unsigned int dis_bkoff : 1; /* disable back-off function */
-+ unsigned int max_len : 3; /* maximum receive frame length allowed */
-+ unsigned int adj_ifg : 4; /* adjust IFG from 96+/-56 */
-+ unsigned int : 1; /* reserved */
-+ unsigned int loop_back : 1; /* transmit data loopback enable */
-+ unsigned int dis_rx : 1; /* disable receive */
-+ unsigned int dis_tx : 1; /* disable transmit */
-+#else
-+ unsigned int dis_tx : 1; /* disable transmit */
-+ unsigned int dis_rx : 1; /* disable receive */
-+ unsigned int loop_back : 1; /* transmit data loopback enable */
-+ unsigned int : 1; /* reserved */
-+ unsigned int adj_ifg : 4; /* adjust IFG from 96+/-56 */
-+ unsigned int max_len : 3; /* maximum receive frame length allowed */
-+ unsigned int dis_bkoff : 1; /* disable back-off function */
-+ unsigned int dis_col : 1; /* disable 16 collisions abort function */
-+ unsigned int sim_test : 1; /* speed up timers in simulation */
-+ unsigned int rx_fc_en : 1; /* RX flow control enable */
-+ unsigned int tx_fc_en : 1; /* TX flow control enable */
-+ unsigned int rgmii_en : 1; /* RGMII in-band status enable */
-+ unsigned int ipv4_tss_rx_en : 1; /* IPv4 TSS RX enable */
-+ unsigned int ipv6_tss_rx_en : 1; /* IPv6 TSS RX enable */
-+ unsigned int rx_tag_remove : 1; /* Remove Rx VLAN tag */
-+ unsigned int rising_latch : 1;
-+ unsigned int inv_rx_clk : 1; /* Inverse RX Clock */
-+ unsigned int : 10;
-+#endif
-+ } bits;
-+} GMAC_CONFIG0_T;
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit1_001c
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int : 28;
-+ unsigned int buf_size : 4; /* per packet buffer size */
-+#else
-+ unsigned int buf_size : 4; /* per packet buffer size */
-+ unsigned int : 28;
-+#endif
-+ } bits;
-+} GMAC_CONFIG1_T;
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit1_0020
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int rel_threshold : 16; /* flow control release threshold */
-+ unsigned int set_threshold : 16; /* flow control set threshold */
-+#else
-+ unsigned int set_threshold : 16; /* flow control set threshold */
-+ unsigned int rel_threshold : 16; /* flow control release threshold */
-+#endif
-+ } bits;
-+} GMAC_CONFIG2_T;
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit1_0024
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int : 16;
-+ unsigned int buf_num : 16; /* return buffer number from software */
-+#else
-+ unsigned int buf_num : 16; /* return buffer number from software */
-+ unsigned int : 16;
-+#endif
-+ } bits;
-+} GMAC_BNCR_T;
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit1_0028
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int : 16;
-+ unsigned int buf_remain : 16; /* remaining buffer number */
-+#else
-+ unsigned int buf_remain : 16; /* remaining buffer number */
-+ unsigned int : 16;
-+#endif
-+ } bits;
-+} GMAC_RBNR_T;
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit1_002c
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int : 25;
-+ unsigned int mii_rmii : 2; /* PHY interface type */
-+ unsigned int phy_mode : 1; /* PHY interface mode in 10M-bps */
-+ unsigned int duplex : 1; /* duplex mode */
-+ unsigned int speed : 2; /* link speed(00->2.5M 01->25M 10->125M) */
-+ unsigned int link : 1; /* link status */
-+#else
-+ unsigned int link : 1; /* link status */
-+ unsigned int speed : 2; /* link speed(00->2.5M 01->25M 10->125M) */
-+ unsigned int duplex : 1; /* duplex mode */
-+ unsigned int phy_mode : 1; /* PHY interface mode in 10M-bps */
-+ unsigned int mii_rmii : 2; /* PHY interface type */
-+ unsigned int : 25;
-+#endif
-+ } bits;
-+} GMAC_STATUS_T;
-+
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit1_009
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int : 10;
-+ unsigned int tx_fail : 1; /* Tx fail interrupt */
-+ unsigned int cnt_full : 1; /* MIB counters half full interrupt */
-+ unsigned int rx_pause_on : 1; /* received pause on frame interrupt */
-+ unsigned int tx_pause_on : 1; /* transmit pause on frame interrupt */
-+ unsigned int rx_pause_off : 1; /* received pause off frame interrupt */
-+ unsigned int tx_pause_off : 1; /* received pause off frame interrupt */
-+ unsigned int rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt */
-+ unsigned int tx_underrun : 1; /* GMAC Tx FIFO underrun interrupt */
-+ unsigned int : 6;
-+ unsigned int m_tx_fail : 1; /* Tx fail interrupt mask */
-+ unsigned int m_cnt_full : 1; /* MIB counters half full interrupt mask */
-+ unsigned int m_rx_pause_on : 1; /* received pause on frame interrupt mask */
-+ unsigned int m_tx_pause_on : 1; /* transmit pause on frame interrupt mask */
-+ unsigned int m_rx_pause_off : 1; /* received pause off frame interrupt mask */
-+ unsigned int m_tx_pause_off : 1; /* received pause off frame interrupt mask */
-+ unsigned int m_rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt mask */
-+ unsigned int m_tx_underrun : 1; /* GMAC Tx FIFO underrun interrupt mask */
-+#else
-+ unsigned int m_tx_underrun : 1; /* GMAC Tx FIFO underrun interrupt mask */
-+ unsigned int m_rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt mask */
-+ unsigned int m_tx_pause_off : 1; /* received pause off frame interrupt mask */
-+ unsigned int m_rx_pause_off : 1; /* received pause off frame interrupt mask */
-+ unsigned int m_tx_pause_on : 1; /* transmit pause on frame interrupt mask */
-+ unsigned int m_rx_pause_on : 1; /* received pause on frame interrupt mask */
-+ unsigned int m_cnt_full : 1; /* MIB counters half full interrupt mask */
-+ unsigned int m_tx_fail : 1; /* Tx fail interrupt mask */
-+ unsigned int : 6;
-+ unsigned int tx_underrun : 1; /* GMAC Tx FIFO underrun interrupt */
-+ unsigned int rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt */
-+ unsigned int tx_pause_off : 1; /* received pause off frame interrupt */
-+ unsigned int rx_pause_off : 1; /* received pause off frame interrupt */
-+ unsigned int tx_pause_on : 1; /* transmit pause on frame interrupt */
-+ unsigned int rx_pause_on : 1; /* received pause on frame interrupt */
-+ unsigned int cnt_full : 1; /* MIB counters half full interrupt */
-+ unsigned int tx_fail : 1; /* Tx fail interrupt */
-+ unsigned int : 10;
-+#endif
-+ } bits;
-+} GMAC_INT_MASK_T;
-+
-+
-+/*******************************************/
-+/* the register structure of GMAC DMA */
-+/*******************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit2_ff00
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int : 7; /* reserved */
-+ unsigned int s_ahb_err : 1; /* Slave AHB bus error */
-+ unsigned int tx_err_code : 4; /* TxDMA error code */
-+ unsigned int rx_err_code : 4; /* RxDMA error code */
-+ unsigned int device_id : 12;
-+ unsigned int revision_id : 4;
-+#else
-+ unsigned int revision_id : 4;
-+ unsigned int device_id : 12;
-+ unsigned int rx_err_code : 4; /* RxDMA error code */
-+ unsigned int tx_err_code : 4; /* TxDMA error code */
-+ unsigned int s_ahb_err : 1; /* Slave AHB bus error */
-+ unsigned int : 7; /* reserved */
-+#endif
-+ } bits;
-+} GMAC_DMA_DEVICE_ID_T;
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit2_ff04
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int ts_finish : 1; /* finished tx interrupt */
-+ unsigned int ts_derr : 1; /* AHB Bus Error while tx */
-+ unsigned int ts_perr : 1; /* Tx Descriptor protocol error */
-+ unsigned int ts_eodi : 1; /* TxDMA end of descriptor interrupt */
-+ unsigned int ts_eofi : 1; /* TxDMA end of frame interrupt */
-+ unsigned int rs_finish : 1; /* finished rx interrupt */
-+ unsigned int rs_derr : 1; /* AHB Bus Error while rx */
-+ unsigned int rs_perr : 1; /* Rx Descriptor protocol error */
-+ unsigned int rs_eodi : 1; /* RxDMA end of descriptor interrupt */
-+ unsigned int rs_eofi : 1; /* RxDMA end of frame interrupt */
-+ unsigned int : 1; /* Tx fail interrupt */
-+ unsigned int cnt_full : 1; /* MIB counters half full interrupt */
-+ unsigned int rx_pause_on : 1; /* received pause on frame interrupt */
-+ unsigned int tx_pause_on : 1; /* transmit pause on frame interrupt */
-+ unsigned int rx_pause_off : 1; /* received pause off frame interrupt */
-+ unsigned int tx_pause_off : 1; /* received pause off frame interrupt */
-+ unsigned int rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt */
-+ unsigned int link_change : 1; /* GMAC link changed Interrupt for RGMII mode */
-+ unsigned int : 1;
-+ unsigned int : 1;
-+ unsigned int : 3;
-+ unsigned int loop_back : 1; /* loopback TxDMA to RxDMA */
-+ unsigned int : 1; /* Tx fail interrupt mask */
-+ unsigned int m_cnt_full : 1; /* MIB counters half full interrupt mask */
-+ unsigned int m_rx_pause_on : 1; /* received pause on frame interrupt mask */
-+ unsigned int m_tx_pause_on : 1; /* transmit pause on frame interrupt mask */
-+ unsigned int m_rx_pause_off : 1; /* received pause off frame interrupt mask */
-+ unsigned int m_tx_pause_off : 1; /* received pause off frame interrupt mask */
-+ unsigned int m_rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt mask */
-+ unsigned int m_link_change : 1; /* GMAC link changed Interrupt mask for RGMII mode */
-+#else
-+ unsigned int m_link_change : 1; /* GMAC link changed Interrupt mask for RGMII mode */
-+ unsigned int m_rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt mask */
-+ unsigned int m_tx_pause_off : 1; /* received pause off frame interrupt mask */
-+ unsigned int m_rx_pause_off : 1; /* received pause off frame interrupt mask */
-+ unsigned int m_tx_pause_on : 1; /* transmit pause on frame interrupt mask */
-+ unsigned int m_rx_pause_on : 1; /* received pause on frame interrupt mask */
-+ unsigned int m_cnt_full : 1; /* MIB counters half full interrupt mask */
-+ unsigned int : 1; /* Tx fail interrupt mask */
-+ unsigned int loop_back : 1; /* loopback TxDMA to RxDMA */
-+ unsigned int : 3;
-+ unsigned int : 1;
-+ unsigned int : 1;
-+ unsigned int link_change : 1; /* GMAC link changed Interrupt for RGMII mode */
-+ unsigned int rx_overrun : 1; /* GMAC Rx FIFO overrun interrupt */
-+ unsigned int tx_pause_off : 1; /* received pause off frame interrupt */
-+ unsigned int rx_pause_off : 1; /* received pause off frame interrupt */
-+ unsigned int tx_pause_on : 1; /* transmit pause on frame interrupt */
-+ unsigned int rx_pause_on : 1; /* received pause on frame interrupt */
-+ unsigned int cnt_full : 1; /* MIB counters half full interrupt */
-+ unsigned int : 1; /* Tx fail interrupt */
-+ unsigned int rs_eofi : 1; /* RxDMA end of frame interrupt */
-+ unsigned int rs_eodi : 1; /* RxDMA end of descriptor interrupt */
-+ unsigned int rs_perr : 1; /* Rx Descriptor protocol error */
-+ unsigned int rs_derr : 1; /* AHB Bus Error while rx */
-+ unsigned int rs_finish : 1; /* finished rx interrupt */
-+ unsigned int ts_eofi : 1; /* TxDMA end of frame interrupt */
-+ unsigned int ts_eodi : 1; /* TxDMA end of descriptor interrupt */
-+ unsigned int ts_perr : 1; /* Tx Descriptor protocol error */
-+ unsigned int ts_derr : 1; /* AHB Bus Error while tx */
-+ unsigned int ts_finish : 1; /* finished tx interrupt */
-+#endif
-+ } bits;
-+} GMAC_DMA_STATUS_T;
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit2_ff08
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int td_start : 1; /* Start DMA transfer */
-+ unsigned int td_continue : 1; /* Continue DMA operation */
-+ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
-+ unsigned int : 1;
-+ unsigned int td_prot : 4; /* TxDMA protection control */
-+ unsigned int td_burst_size : 2; /* TxDMA max burst size for every AHB request */
-+ unsigned int td_bus : 2; /* peripheral bus width;0x->8 bits,10->16 bits,11->32 bits */
-+ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */
-+ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */
-+ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */
-+ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */
-+ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */
-+ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */
-+ unsigned int : 14;
-+#else
-+ unsigned int : 14;
-+ unsigned int td_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */
-+ unsigned int td_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */
-+ unsigned int td_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */
-+ unsigned int td_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */
-+ unsigned int td_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */
-+ unsigned int td_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */
-+ unsigned int td_bus : 2; /* peripheral bus width;0x->8 bits,10->16 bits,11->32 bits */
-+ unsigned int td_burst_size : 2; /* TxDMA max burst size for every AHB request */
-+ unsigned int td_prot : 4; /* TxDMA protection control */
-+ unsigned int : 1;
-+ unsigned int td_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
-+ unsigned int td_continue : 1; /* Continue DMA operation */
-+ unsigned int td_start : 1; /* Start DMA transfer */
-+#endif
-+ } bits;
-+} GMAC_TXDMA_CTRL_T;
-+
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit2_ff0c
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int td_first_des_ptr : 28;/* first descriptor address */
-+ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */
-+ unsigned int : 3;
-+#else
-+ unsigned int : 3;
-+ unsigned int td_busy : 1;/* 1-TxDMA busy; 0-TxDMA idle */
-+ unsigned int td_first_des_ptr : 28;/* first descriptor address */
-+#endif
-+ } bits;
-+} GMAC_TXDMA_FIRST_DESC_T;
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit2_ff10
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int ndar : 28; /* next descriptor address */
-+ unsigned int eofie : 1; /* end of frame interrupt enable */
-+ unsigned int : 1;
-+ unsigned int sof_eof : 2;
-+#else
-+ unsigned int sof_eof : 2;
-+ unsigned int : 1;
-+ unsigned int eofie : 1; /* end of frame interrupt enable */
-+ unsigned int ndar : 28; /* next descriptor address */
-+#endif
-+ } bits;
-+} GMAC_TXDMA_CURR_DESC_T;
-+
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit2_ff14
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int rd_start : 1; /* Start DMA transfer */
-+ unsigned int rd_continue : 1; /* Continue DMA operation */
-+ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
-+ unsigned int : 1;
-+ unsigned int rd_prot : 4; /* DMA protection control */
-+ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */
-+ unsigned int rd_bus : 2; /* peripheral bus width;0x->8 bits,10->16 bits,11->32 bits */
-+ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */
-+ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */
-+ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */
-+ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */
-+ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */
-+ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */
-+ unsigned int : 14;
-+#else
-+ unsigned int : 14;
-+ unsigned int rd_eof_en : 1; /* End of frame interrupt Enable;1-enable;0-mask */
-+ unsigned int rd_eod_en : 1; /* End of Descriptor interrupt Enable;1-enable;0-mask */
-+ unsigned int rd_perr_en : 1; /* Protocol Failure Interrupt Enable;1-enable;0-mask */
-+ unsigned int rd_fail_en : 1; /* DMA Fail Interrupt Enable;1-enable;0-mask */
-+ unsigned int rd_finish_en : 1; /* DMA Finish Event Interrupt Enable;1-enable;0-mask */
-+ unsigned int rd_endian : 1; /* AHB Endian. 0-little endian; 1-big endian */
-+ unsigned int rd_bus : 2; /* peripheral bus width;0x->8 bits,10->16 bits,11->32 bits */
-+ unsigned int rd_burst_size : 2; /* DMA max burst size for every AHB request */
-+ unsigned int rd_prot : 4; /* DMA protection control */
-+ unsigned int : 1;
-+ unsigned int rd_chain_mode : 1; /* Descriptor Chain Mode;1-Descriptor Chain mode, 0-Direct DMA mode*/
-+ unsigned int rd_continue : 1; /* Continue DMA operation */
-+ unsigned int rd_start : 1; /* Start DMA transfer */
-+#endif
-+ } bits;
-+} GMAC_RXDMA_CTRL_T;
-+
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit2_ff18
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int rd_first_des_ptr : 28;/* first descriptor address */
-+ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */
-+ unsigned int : 3;
-+#else
-+ unsigned int : 3;
-+ unsigned int rd_busy : 1;/* 1-RxDMA busy; 0-RxDMA idle */
-+ unsigned int rd_first_des_ptr : 28;/* first descriptor address */
-+#endif
-+ } bits;
-+} GMAC_RXDMA_FIRST_DESC_T;
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit2_ff1c
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int ndar : 28; /* next descriptor address */
-+ unsigned int eofie : 1; /* end of frame interrupt enable */
-+ unsigned int : 1;
-+ unsigned int sof_eof : 2;
-+#else
-+ unsigned int sof_eof : 2;
-+ unsigned int : 1;
-+ unsigned int eofie : 1; /* end of frame interrupt enable */
-+ unsigned int ndar : 28; /* next descriptor address */
-+#endif
-+ } bits;
-+} GMAC_RXDMA_CURR_DESC_T;
-+
-+
-+/********************************************/
-+/* Descriptor Format */
-+/********************************************/
-+
-+typedef struct descriptor_t
-+{
-+ union frame_control_t
-+ {
-+ unsigned int bits32;
-+ struct bits_0000
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */
-+ unsigned int derr : 1; /* data error during processing this descriptor */
-+ unsigned int perr : 1; /* protocol error during processing this descriptor */
-+ unsigned int csum_state : 3; /* checksum error status */
-+ unsigned int vlan_tag : 1; /* 802.1q vlan tag packet */
-+ unsigned int frame_state: 3; /* reference Rx Status1 */
-+ unsigned int desc_count : 6; /* number of descriptors used for the current frame */
-+ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/
-+#else
-+ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/
-+ unsigned int desc_count : 6; /* number of descriptors used for the current frame */
-+ unsigned int frame_state: 3; /* reference Rx Status1 */
-+ unsigned int vlan_tag : 1; /* 802.1q vlan tag packet */
-+ unsigned int csum_state : 3; /* checksum error status */
-+ unsigned int perr : 1; /* protocol error during processing this descriptor */
-+ unsigned int derr : 1; /* data error during processing this descriptor */
-+ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */
-+#endif
-+ } bits_rx;
-+
-+ struct bits_0001
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */
-+ unsigned int derr : 1; /* data error during processing this descriptor */
-+ unsigned int perr : 1; /* protocol error during processing this descriptor */
-+ unsigned int : 6;
-+ unsigned int success_tx : 1; /* successful transmitted */
-+ unsigned int desc_count : 6; /* number of descriptors used for the current frame */
-+ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/
-+#else
-+ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/
-+ unsigned int desc_count : 6; /* number of descriptors used for the current frame */
-+ unsigned int success_tx : 1; /* successful transmitted */
-+ unsigned int : 6;
-+ unsigned int perr : 1; /* protocol error during processing this descriptor */
-+ unsigned int derr : 1; /* data error during processing this descriptor */
-+ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */
-+#endif
-+ } bits_tx_in;
-+
-+ struct bits_0002
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */
-+ unsigned int derr : 1; /* data error during processing this descriptor */
-+ unsigned int perr : 1; /* protocol error during processing this descriptor */
-+ unsigned int : 2;
-+ unsigned int udp_csum_en: 1; /* TSS UDP checksum enable */
-+ unsigned int tcp_csum_en: 1; /* TSS TCP checksum enable */
-+ unsigned int ipv6_tx_en : 1; /* TSS IPv6 TX enable */
-+ unsigned int ip_csum_en : 1; /* TSS IPv4 IP Header checksum enable */
-+ unsigned int vlan_enable: 1; /* VLAN TIC insertion enable */
-+ unsigned int desc_count : 6; /* number of descriptors used for the current frame */
-+ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/
-+#else
-+ unsigned int buffer_size:16; /* transfer buffer size associated with current description*/
-+ unsigned int desc_count : 6; /* number of descriptors used for the current frame */
-+ unsigned int vlan_enable: 1; /* VLAN TIC insertion enable */
-+ unsigned int ip_csum_en : 1; /* TSS IPv4 IP Header checksum enable */
-+ unsigned int ipv6_tx_en : 1; /* TSS IPv6 TX enable */
-+ unsigned int tcp_csum_en: 1; /* TSS TCP checksum enable */
-+ unsigned int udp_csum_en: 1; /* TSS UDP checksum enable */
-+ unsigned int : 2;
-+ unsigned int perr : 1; /* protocol error during processing this descriptor */
-+ unsigned int derr : 1; /* data error during processing this descriptor */
-+ unsigned int own : 1; /* owner bit. 0-CPU, 1-DMA */
-+#endif
-+ } bits_tx_out;
-+
-+ } frame_ctrl;
-+
-+ union flag_status_t
-+ {
-+ unsigned int bits32;
-+ struct bits_0004
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int priority : 3; /* user priority extracted from receiving frame*/
-+ unsigned int cfi : 1; /* cfi extracted from receiving frame*/
-+ unsigned int vlan_id :12; /* VLAN ID extracted from receiving frame */
-+ unsigned int frame_count:16; /* received frame byte count,include CRC,not include VLAN TIC */
-+#else
-+ unsigned int frame_count:16; /* received frame byte count,include CRC,not include VLAN TIC */
-+ unsigned int vlan_id :12; /* VLAN ID extracted from receiving frame */
-+ unsigned int cfi : 1; /* cfi extracted from receiving frame*/
-+ unsigned int priority : 3; /* user priority extracted from receiving frame*/
-+#endif
-+ } bits_rx_status;
-+
-+ struct bits_0005
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int priority : 3; /* user priority to transmit*/
-+ unsigned int cfi : 1; /* cfi to transmit*/
-+ unsigned int vlan_id :12; /* VLAN ID to transmit */
-+ unsigned int frame_count:16; /* total tx frame byte count */
-+#else
-+ unsigned int frame_count:16; /* total tx frame byte count */
-+ unsigned int vlan_id :12; /* VLAN ID to transmit */
-+ unsigned int cfi : 1; /* cfi to transmit*/
-+ unsigned int priority : 3; /* user priority to transmit*/
-+#endif
-+ } bits_tx_flag;
-+ } flag_status;
-+
-+ unsigned int buf_adr; /* data buffer address */
-+
-+ union next_desc_t
-+ {
-+ unsigned int next_descriptor;
-+ struct bits_000c
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int ndar :28; /* next descriptor address */
-+ unsigned int eofie : 1; /* end of frame interrupt enable */
-+ unsigned int : 1;
-+ unsigned int sof_eof : 2; /* 00-the linking descriptor 01-the last descriptor of a frame*/
-+ /* 10-the first descriptor of a frame 11-only one descriptor for a frame*/
-+#else
-+ unsigned int sof_eof : 2; /* 00-the linking descriptor 01-the last descriptor of a frame*/
-+ /* 10-the first descriptor of a frame 11-only one descriptor for a frame*/
-+ unsigned int : 1;
-+ unsigned int eofie : 1; /* end of frame interrupt enable */
-+ unsigned int ndar :28; /* next descriptor address */
-+#endif
-+ } bits;
-+ } next_desc;
-+} GMAC_DESCRIPTOR_T;
-+
-+typedef struct gmac_conf {
-+ struct net_device *dev;
-+ int portmap;
-+ int vid;
-+ int flag; /* 1: active 0: non-active */
-+} sys_gmac_conf;
-+
-+struct gmac_private {
-+ unsigned char *tx_bufs; /* Tx bounce buffer region. */
-+ unsigned char *rx_bufs;
-+ GMAC_DESCRIPTOR_T *tx_desc; /* point to virtual TX descriptor address*/
-+ GMAC_DESCRIPTOR_T *rx_desc; /* point to virtual RX descriptor address*/
-+ GMAC_DESCRIPTOR_T *tx_cur_desc; /* point to current TX descriptor */
-+ GMAC_DESCRIPTOR_T *rx_cur_desc; /* point to current RX descriptor */
-+ GMAC_DESCRIPTOR_T *tx_finished_desc;
-+ GMAC_DESCRIPTOR_T *rx_finished_desc;
-+ unsigned long cur_tx;
-+ unsigned int cur_rx; /* Index into the Rx buffer of next Rx pkt. */
-+ unsigned int tx_flag;
-+ unsigned long dirty_tx;
-+ unsigned char *tx_buf[TX_DESC_NUM]; /* Tx bounce buffers */
-+ dma_addr_t tx_desc_dma; /* physical TX descriptor address */
-+ dma_addr_t rx_desc_dma; /* physical RX descriptor address */
-+ dma_addr_t tx_bufs_dma; /* physical TX descriptor address */
-+ dma_addr_t rx_bufs_dma; /* physical RX descriptor address */
-+ struct net_device_stats stats;
-+ pid_t thr_pid;
-+ wait_queue_head_t thr_wait;
-+ struct completion thr_exited;
-+ spinlock_t lock;
-+ int time_to_die;
-+ unsigned int tx_desc_hdr[GMAC_PHY_IF]; /* the descriptor which sw can fill */
-+ unsigned int tx_desc_tail[GMAC_PHY_IF]; /* the descriptor which is not cleaned yet */
-+};
-+
-+
-+struct reg_ioctl_data {
-+ unsigned int reg_addr; /* the register address */
-+ unsigned int val_in; /* data write to the register */
-+ unsigned int val_out; /* data read from the register */
-+};
-+
-+#ifdef CONFIG_SL2312_MPAGE
-+typedef struct tx_data_t {
-+ int freeable; // 1 when it's skb. it can be freed in tx interrupt handler
-+ struct sk_buff* skb; // skb
-+ int desc_in_use; // 1 when the desc is in use. 0 when desc is available.
-+ long end_seq; // to find out packets are in seq.
-+ // so this value is the seq of next packet.
-+} tx_data;
-+#endif
-+
-+/*************************************************************
-+ * Global Variable
-+ *************************************************************/
-+struct semaphore sem_gmac; /* semaphore for share pins issue */
-+
-+/*************************************************************
-+ * Static Global Variable
-+ *************************************************************/
-+// static unsigned int MAC_BASE_ADDR = GMAC0_BASE;
-+static unsigned int gmac_base_addr[GMAC_PHY_IF] = {GMAC0_BASE,GMAC1_BASE};
-+static unsigned int gmac_irq[GMAC_PHY_IF] = {IRQ_GMAC0,IRQ_GMAC1};
-+static struct net_device *gmac_dev[GMAC_PHY_IF];
-+
-+static unsigned int FLAG_SWITCH=0; /* if 1-->switch chip presented. if 0-->switch chip unpresented */
-+static unsigned int flow_control_enable[GMAC_PHY_IF] = {1,1};
-+static unsigned int pre_phy_status[GMAC_PHY_IF] = {LINK_DOWN,LINK_DOWN};
-+static unsigned int tx_desc_virtual_base[GMAC_PHY_IF];
-+static unsigned int rx_desc_virtual_base[GMAC_PHY_IF];
-+static unsigned int full_duplex = 1;
-+static unsigned int speed = 1;
-+#ifdef CONFIG_SL2312_MPAGE
-+static tx_data tx_skb[GMAC_PHY_IF][TX_DESC_NUM];
-+#else
-+static struct sk_buff *tx_skb[GMAC_PHY_IF][TX_DESC_NUM];
-+#endif
-+static struct sk_buff *rx_skb[GMAC_PHY_IF][RX_DESC_NUM];
-+static unsigned int tx_desc_start_adr[GMAC_PHY_IF];
-+static unsigned int rx_desc_start_adr[GMAC_PHY_IF];
-+static unsigned char eth0_mac[6]= {0x00,0x50,0xc2,0x2b,0xd3,0x25};
-+static unsigned char eth1_mac[6]= {0x00,0x50,0xc2,0x2b,0xdf,0xfe};
-+static unsigned int next_tick = 3 * HZ;
-+
-+static unsigned int phy_addr[GMAC_PHY_IF] = {0x01,0x02}; /* define PHY address */
-+
-+DECLARE_WAIT_QUEUE_HEAD(gmac_queue);
-+//static wait_queue_t wait;
-+
-+struct gmac_conf VLAN_conf[] = {
-+#ifdef CONFIG_ADM_6999
-+ { (struct net_device *)0,0x7F,1 },
-+ { (struct net_device *)0,0x80,2 }
-+#endif
-+#ifdef CONFIG_ADM_6996
-+ { (struct net_device *)0,0x0F,1 },
-+ { (struct net_device *)0,0x10,2 }
-+#endif
-+};
-+
-+#define NUM_VLAN_IF (sizeof(VLAN_conf)/sizeof(struct gmac_conf))
-+
-+
-+/************************************************/
-+/* GMAC function declare */
-+/************************************************/
-+
-+unsigned int mii_read(unsigned char phyad,unsigned char regad);
-+void mii_write(unsigned char phyad,unsigned char regad,unsigned int value);
-+static void gmac_set_phy_status(struct net_device *dev);
-+static void gmac_get_phy_status(struct net_device *dev);
-+static int gmac_phy_thread (void *data);
-+static int gmac_set_mac_address(struct net_device *dev, void *addr);
-+static void gmac_tx_timeout(struct net_device *dev);
-+static void gmac_tx_packet_complete(struct net_device *dev);
-+static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev);
-+static void gmac_set_rx_mode(struct net_device *dev);
-+static void gmac_rx_packet(struct net_device *dev);
-+static int gmac_open (struct net_device *dev);
-+static int gmac_netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-+
-+static unsigned int gmac_get_dev_index(struct net_device *dev);
-+static unsigned int gmac_select_interface(struct net_device *dev);
-+
-+#ifdef CONFIG_SL2312_MPAGE
-+int printk_all(int dev_index, struct gmac_private* tp);
-+#endif
-+
-+/****************************************/
-+/* SPI Function Declare */
-+/****************************************/
-+void SPI_write(unsigned char addr,unsigned int value);
-+unsigned int SPI_read(unsigned char table,unsigned char addr);
-+void SPI_write_bit(char bit_EEDO);
-+unsigned int SPI_read_bit(void);
-+void SPI_default(void);
-+void SPI_reset(unsigned char rstype,unsigned char port_cnt);
-+void SPI_pre_st(void);
-+void SPI_CS_enable(unsigned char enable);
-+void SPI_Set_VLAN(unsigned char LAN,unsigned int port_mask);
-+void SPI_Set_tag(unsigned int port,unsigned tag);
-+void SPI_Set_PVID(unsigned int PVID,unsigned int port_mask);
-+unsigned int SPI_Get_PVID(unsigned int port);
-+void SPI_mac_lock(unsigned int port, unsigned char lock);
-+void SPI_get_port_state(unsigned int port);
-+void SPI_port_enable(unsigned int port,unsigned char enable);
-+unsigned int SPI_get_identifier(void);
-+void SPI_get_status(unsigned int port);
-+
-+/****************************************/
-+/* VLAN Function Declare */
-+/****************************************/
-+int getVLANfromdev (struct net_device *dev );
-+struct net_device * getdevfromVLAN( int VID);
-+
-+
-+
-+/************************************************/
-+/* function body */
-+/************************************************/
-+#if 0
-+void hw_memcpy(void *to,const void *from,unsigned long n)
-+{
-+ writel(from,SL2312_DRAM_CTRL_BASE+0x20); /* set source address */
-+ writel(to,SL2312_DRAM_CTRL_BASE+0x24); /* set destination address */
-+ writel(n,SL2312_DRAM_CTRL_BASE+0x28); /* set byte count */
-+ writel(0x00000001,SL2312_DRAM_CTRL_BASE+0x2c);
-+ while (readl(SL2312_DRAM_CTRL_BASE+0x2c));
-+}
-+#endif
-+
-+static unsigned int gmac_read_reg(unsigned int addr)
-+{
-+ unsigned int reg_val;
-+// unsigned int flags;
-+// spinlock_t lock;
-+
-+// spin_lock_irqsave(&lock, flags);
-+ reg_val = readl(addr); // Gary Chen
-+// spin_unlock_irqrestore(&lock, flags);
-+ return (reg_val);
-+}
-+
-+static void gmac_write_reg(unsigned int addr,unsigned int data,unsigned int bit_mask)
-+{
-+ unsigned int reg_val;
-+ //unsigned int *addr;
-+// unsigned int flags;
-+// spinlock_t lock;
-+
-+// spin_lock_irqsave(&lock, flags);
-+ reg_val = ( gmac_read_reg(addr) & (~bit_mask) ) | (data & bit_mask);
-+ writel(reg_val,addr);
-+// spin_unlock_irqrestore(&lock, flags);
-+ return;
-+}
-+
-+
-+static void gmac_sw_reset(struct net_device *dev)
-+{
-+ unsigned int index;
-+ unsigned int reg_val;
-+
-+ index = gmac_get_dev_index(dev);
-+ if (index==0)
-+ reg_val = readl(GMAC_GLOBAL_BASE_ADDR+0x0c) | 0x00000020; /* GMAC0 S/W reset */
-+ else
-+ reg_val = readl(GMAC_GLOBAL_BASE_ADDR+0x0c) | 0x00000040; /* GMAC1 S/W reset */
-+
-+ writel(reg_val,GMAC_GLOBAL_BASE_ADDR+0x0c);
-+ return;
-+}
-+
-+static void gmac_get_mac_address(void)
-+{
-+#ifdef CONFIG_MTD
-+ extern int get_vlaninfo(vlaninfo* vlan);
-+ static vlaninfo vlan[2];
-+
-+ if (get_vlaninfo(&vlan[0]))
-+ {
-+ memcpy(eth0_mac,vlan[0].mac,6);
-+ VLAN_conf[0].vid = vlan[0].vlanid;
-+ VLAN_conf[0].portmap = vlan[0].vlanmap;
-+ memcpy(eth1_mac,vlan[1].mac,6);
-+ VLAN_conf[1].vid = vlan[1].vlanid;
-+ VLAN_conf[1].portmap = vlan[1].vlanmap;
-+ }
-+#else
-+ unsigned int reg_val;
-+
-+ reg_val = readl(IO_ADDRESS(SL2312_SECURITY_BASE)+0xac);
-+ eth0_mac[4] = (reg_val & 0xff00) >> 8;
-+ eth0_mac[5] = reg_val & 0x00ff;
-+ reg_val = readl(IO_ADDRESS(SL2312_SECURITY_BASE)+0xac);
-+ eth1_mac[4] = (reg_val & 0xff00) >> 8;
-+ eth1_mac[5] = reg_val & 0x00ff;
-+#endif
-+ return;
-+}
-+
-+static unsigned int gmac_get_dev_index(struct net_device *dev)
-+{
-+ unsigned int i;
-+
-+ /* get device index number */
-+ for (i=0;i<GMAC_PHY_IF;i++)
-+ {
-+ if (gmac_dev[i]==dev)
-+ {
-+ return(i);
-+ }
-+ }
-+ return (0xff);
-+}
-+
-+static unsigned int gmac_select_interface(struct net_device *dev)
-+{
-+ unsigned int index;
-+
-+ index = gmac_get_dev_index(dev);
-+ // MAC_BASE_ADDR = gmac_base_addr[index]; // Gary Chen
-+ return (index);
-+}
-+
-+
-+static void gmac_dump_register(struct net_device *dev)
-+{
-+#if 0
-+ unsigned int i,val,index;
-+
-+ index = gmac_select_interface(dev);
-+
-+ printk("========== GMAC%d ==========\n",index);
-+ for (i=0;i<=0x7c;i=i+4)
-+ {
-+ val = gmac_read_reg(gmac_base_addr[index] + i);
-+ printk("offset = %08x value = %08x\n",i,val);
-+ }
-+ for (i=0xff00;i<=0xff7c;i=i+4)
-+ {
-+ val = gmac_read_reg(gmac_base_addr[index] + i);
-+ printk("offset = %08x value = %08x\n",i,val);
-+ }
-+#endif
-+}
-+
-+static int gmac_init_chip(struct net_device *dev)
-+{
-+ GMAC_RBNR_T rbnr_val,rbnr_mask;
-+ GMAC_CONFIG2_T config2_val;
-+ GMAC_CONFIG0_T config0,config0_mask;
-+ GMAC_CONFIG1_T config1;
-+ struct sockaddr sock;
-+ unsigned int status;
-+ unsigned int phy_mode;
-+ unsigned int index;
-+
-+ index = gmac_get_dev_index(dev);
-+
-+ /* set GMAC RMII mode */
-+ if (index==0)
-+ phy_mode = 0; /* 0->MII 1->GMII 2->RGMII(10/100) 3->RGMII(1000) */
-+ else
-+ phy_mode = 2; /* 0->MII 1->GMII 2->RGMII(10/100) 3->RGMII(1000) */
-+
-+ /* set PHY operation mode */
-+ status = (phy_mode<<5) | 0x11 | (full_duplex<<3) | (speed<<1);
-+ gmac_write_reg(gmac_base_addr[index] + GMAC_STATUS,status ,0x0000007f);
-+
-+ /* set station MAC address1 and address2 */
-+ if (index==0)
-+ memcpy(&sock.sa_data[0],&eth0_mac[0],6);
-+ else
-+ memcpy(&sock.sa_data[0],&eth1_mac[0],6);
-+ gmac_set_mac_address(dev,(void *)&sock);
-+
-+ /* set RX_FLTR register to receive all multicast packet */
-+ gmac_write_reg(gmac_base_addr[index] + GMAC_RX_FLTR,0x0000001F,0x0000001f);
-+ //gmac_write_reg(gmac_base_addr[index] + GMAC_RX_FLTR,0x00000007,0x0000001f);
-+
-+ /* set per packet buffer size */
-+ config1.bits32 = 0;
-+ config1.bits.buf_size = 11; /* buffer size = 2048-byte */
-+ gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG1,config1.bits32,0x0000000f);
-+
-+ /* set flow control threshold */
-+ config2_val.bits32 = 0;
-+ config2_val.bits.set_threshold = RX_DESC_NUM/4;
-+ config2_val.bits.rel_threshold = RX_DESC_NUM*3/4;
-+ gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG2,config2_val.bits32,0xffffffff);
-+
-+ /* init remaining buffer number register */
-+ rbnr_val.bits32 = 0;
-+ rbnr_val.bits.buf_remain = RX_DESC_NUM;
-+ rbnr_mask.bits32 = 0;
-+ rbnr_mask.bits.buf_remain = 0xffff;
-+ gmac_write_reg(gmac_base_addr[index] + GMAC_RBNR,rbnr_val.bits32,rbnr_mask.bits32);
-+
-+ /* disable TX/RX and disable internal loop back */
-+ config0.bits32 = 0;
-+ config0_mask.bits32 = 0;
-+ config0.bits.max_len = 2;
-+ if (flow_control_enable[index]==1)
-+ {
-+ config0.bits.tx_fc_en = 1; /* enable tx flow control */
-+ config0.bits.rx_fc_en = 1; /* enable rx flow control */
-+ printk("Enable MAC Flow Control...\n");
-+ }
-+ else
-+ {
-+ config0.bits.tx_fc_en = 0; /* disable tx flow control */
-+ config0.bits.rx_fc_en = 0; /* disable rx flow control */
-+ printk("Disable MAC Flow Control...\n");
-+ }
-+ config0.bits.dis_rx = 1; /* disable rx */
-+ config0.bits.dis_tx = 1; /* disable tx */
-+ config0.bits.loop_back = 0; /* enable/disable GMAC loopback */
-+ config0.bits.inv_rx_clk = 0;
-+ config0.bits.rising_latch = 1;
-+ config0.bits.ipv4_tss_rx_en = 1; /* enable H/W to check ip checksum */
-+ config0.bits.ipv6_tss_rx_en = 1; /* enable H/W to check ip checksum */
-+
-+ config0_mask.bits.max_len = 7;
-+ config0_mask.bits.tx_fc_en = 1;
-+ config0_mask.bits.rx_fc_en = 1;
-+ config0_mask.bits.dis_rx = 1;
-+ config0_mask.bits.dis_tx = 1;
-+ config0_mask.bits.loop_back = 1;
-+ config0_mask.bits.inv_rx_clk = 1;
-+ config0_mask.bits.rising_latch = 1;
-+ config0_mask.bits.ipv4_tss_rx_en = 1;
-+ config0_mask.bits.ipv6_tss_rx_en = 1;
-+ gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
-+
-+ return (0);
-+}
-+
-+static void gmac_enable_tx_rx(struct net_device *dev)
-+{
-+ GMAC_CONFIG0_T config0,config0_mask;
-+ int dev_index;
-+
-+ dev_index = gmac_select_interface(dev);
-+
-+ /* enable TX/RX */
-+ config0.bits32 = 0;
-+ config0_mask.bits32 = 0;
-+ config0.bits.dis_rx = 0; /* enable rx */
-+ config0.bits.dis_tx = 0; /* enable tx */
-+ config0_mask.bits.dis_rx = 1;
-+ config0_mask.bits.dis_tx = 1;
-+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
-+}
-+
-+static void gmac_disable_tx_rx(struct net_device *dev)
-+{
-+ GMAC_CONFIG0_T config0,config0_mask;
-+ int dev_index;
-+
-+ dev_index = gmac_select_interface(dev);
-+
-+ /* enable TX/RX */
-+ config0.bits32 = 0;
-+ config0_mask.bits32 = 0;
-+ config0.bits.dis_rx = 1; /* disable rx */
-+ config0.bits.dis_tx = 1; /* disable tx */
-+ config0_mask.bits.dis_rx = 1;
-+ config0_mask.bits.dis_tx = 1;
-+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
-+}
-+
-+#ifdef CONFIG_SL_NAPI
-+static int gmac_rx_poll_ga(struct net_device *dev, int *budget)
-+{
-+ struct gmac_private *tp = dev->priv;
-+ struct sk_buff *skb;
-+ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask;
-+ GMAC_RXDMA_FIRST_DESC_T rxdma_busy;
-+ GMAC_DESCRIPTOR_T *rx_desc;
-+ unsigned int pkt_size;
-+ unsigned int desc_count;
-+ unsigned int vid;
-+// unsigned int priority;
-+ unsigned int own;
-+ unsigned int good_frame = 0;
-+ unsigned int index;
-+ unsigned int dev_index;
-+ int work = 0;
-+ int work_done = 0;
-+ int quota = min(dev->quota, *budget);
-+
-+ dev_index = gmac_select_interface(dev);
-+
-+ for (;;)
-+ {
-+ own = tp->rx_cur_desc->frame_ctrl.bits32 >> 31;
-+ if (own == CPU) /* check owner bit */
-+ {
-+ rx_desc = tp->rx_cur_desc;
-+#if (GMAC_DEBUG==1)
-+ /* check error interrupt */
-+ if ( (rx_desc->frame_ctrl.bits_rx.derr==1)||(rx_desc->frame_ctrl.bits_rx.perr==1) )
-+ {
-+ printk("%s::Rx Descriptor Processing Error !!!\n",__func__);
-+ }
-+#endif
-+ /* get frame information from the first descriptor of the frame */
-+ pkt_size = rx_desc->flag_status.bits_rx_status.frame_count - 4; /*total byte count in a frame*/
-+#if (GMAC_DEBUG==1)
-+ priority = rx_desc->flag_status.bits_rx_status.priority; /* 802.1p priority */
-+#endif
-+ vid = rx_desc->flag_status.bits_rx_status.vlan_id; /* 802.1q vlan id */
-+ if (vid == 0)
-+ {
-+ vid = 1; /* default vlan */
-+ }
-+ desc_count = rx_desc->frame_ctrl.bits_rx.desc_count; /* get descriptor count per frame */
-+
-+ if (rx_desc->frame_ctrl.bits_rx.frame_state == 0x000) /* good frame */
-+ {
-+ tp->stats.rx_bytes += pkt_size;
-+ tp->stats.rx_packets++;
-+ good_frame = 1;
-+ }
-+ else
-+ {
-+ tp->stats.rx_errors++;
-+ good_frame = 0;
-+ printk("RX status: 0x%x\n",rx_desc->frame_ctrl.bits_rx.frame_state);
-+ }
-+ }
-+ else
-+ {
-+ work_done = 1;
-+ break; /* Rx process is completed */
-+ }
-+
-+ if (good_frame == 1)
-+ {
-+ /* get rx skb buffer index */
-+ index = ((unsigned int)tp->rx_cur_desc - rx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+ if (rx_skb[dev_index][index])
-+ {
-+ skb_reserve (rx_skb[dev_index][index], 2); /* 16 byte align the IP fields. */
-+ rx_skb[dev_index][index]->dev = dev;
-+ rx_skb[dev_index][index]->ip_summed = CHECKSUM_UNNECESSARY;
-+ skb_put(rx_skb[dev_index][index],pkt_size);
-+ rx_skb[dev_index][index]->protocol = eth_type_trans(rx_skb[dev_index][index],dev); /* set skb protocol */
-+ netif_rx(rx_skb[dev_index][index]); /* socket rx */
-+ dev->last_rx = jiffies;
-+
-+ /* allocate rx skb buffer */
-+ if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL) /* allocate socket buffer */
-+ {
-+ printk("%s::skb buffer allocation fail !\n",__func__);
-+ }
-+ rx_skb[dev_index][index] = skb;
-+ tp->rx_cur_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02; /* insert two bytes in the beginning of rx data */
-+ }
-+ else
-+ {
-+ printk("%s::rx skb index error !\n",__func__);
-+ }
-+ }
-+
-+ tp->rx_cur_desc->frame_ctrl.bits_rx.own = DMA; /* release rx descriptor to DMA */
-+ /* point to next rx descriptor */
-+ tp->rx_cur_desc = (GMAC_DESCRIPTOR_T *)((tp->rx_cur_desc->next_desc.next_descriptor & 0xfffffff0)+rx_desc_virtual_base[dev_index]);
-+
-+ /* release buffer to Remaining Buffer Number Register */
-+ if (flow_control_enable[dev_index] ==1)
-+ {
-+// gmac_write_reg(gmac_base_addr[dev_index] + GMAC_BNCR,desc_count,0x0000ffff);
-+ writel(desc_count,(unsigned int *)(gmac_base_addr[dev_index] + GMAC_BNCR));
-+ }
-+
-+ if (work++ >= quota )
-+ {
-+ break;
-+ }
-+ }
-+
-+ /* if RX DMA process is stoped , restart it */
-+ rxdma_busy.bits.rd_first_des_ptr = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_FIRST_DESC);
-+ if (rxdma_busy.bits.rd_busy == 0)
-+ {
-+ rxdma_ctrl.bits32 = 0;
-+ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */
-+ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */
-+ rxdma_ctrl_mask.bits32 = 0;
-+ rxdma_ctrl_mask.bits.rd_start = 1;
-+ rxdma_ctrl_mask.bits.rd_continue = 1;
-+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32);
-+ }
-+
-+ dev->quota -= work;
-+ *budget -= work;
-+ if (work_done==1)
-+ {
-+ /* Receive descriptor is empty now */
-+ netif_rx_complete(dev);
-+ /* enable receive interrupt */
-+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,0x0007c000,0x0007c000); /* enable rx interrupt */
-+ return 0;
-+ }
-+ else
-+ {
-+ return -1;
-+ }
-+}
-+
-+static int gmac_rx_poll_gb(struct net_device *dev, int *budget)
-+{
-+ struct gmac_private *tp = dev->priv;
-+ struct sk_buff *skb;
-+ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask;
-+ GMAC_RXDMA_FIRST_DESC_T rxdma_busy;
-+ GMAC_DESCRIPTOR_T *rx_desc;
-+ unsigned int pkt_size;
-+ unsigned int desc_count;
-+ unsigned int vid;
-+// unsigned int priority;
-+ unsigned int own;
-+ unsigned int good_frame = 0;
-+ unsigned int index;
-+ unsigned int dev_index;
-+ int work = 0;
-+ int work_done = 0;
-+ int quota = min(dev->quota, *budget);
-+
-+ dev_index = gmac_select_interface(dev);
-+
-+ for (;;)
-+ {
-+ own = tp->rx_cur_desc->frame_ctrl.bits32 >> 31;
-+ if (own == CPU) /* check owner bit */
-+ {
-+ rx_desc = tp->rx_cur_desc;
-+#if (GMAC_DEBUG==1)
-+ /* check error interrupt */
-+ if ( (rx_desc->frame_ctrl.bits_rx.derr==1)||(rx_desc->frame_ctrl.bits_rx.perr==1) )
-+ {
-+ printk("%s::Rx Descriptor Processing Error !!!\n",__func__);
-+ }
-+#endif
-+ /* get frame information from the first descriptor of the frame */
-+ pkt_size = rx_desc->flag_status.bits_rx_status.frame_count - 4; /*total byte count in a frame*/
-+#if (GMAC_DEBUG==1)
-+ priority = rx_desc->flag_status.bits_rx_status.priority; /* 802.1p priority */
-+#endif
-+ vid = rx_desc->flag_status.bits_rx_status.vlan_id; /* 802.1q vlan id */
-+ if (vid == 0)
-+ {
-+ vid = 1; /* default vlan */
-+ }
-+ desc_count = rx_desc->frame_ctrl.bits_rx.desc_count; /* get descriptor count per frame */
-+
-+ if (rx_desc->frame_ctrl.bits_rx.frame_state == 0x000) /* good frame */
-+ {
-+ tp->stats.rx_bytes += pkt_size;
-+ tp->stats.rx_packets++;
-+ good_frame = 1;
-+ }
-+ else
-+ {
-+ tp->stats.rx_errors++;
-+ good_frame = 0;
-+ printk("RX status: 0x%x\n",rx_desc->frame_ctrl.bits_rx.frame_state);
-+ }
-+ }
-+ else
-+ {
-+ work_done = 1;
-+ break; /* Rx process is completed */
-+ }
-+
-+ if (good_frame == 1)
-+ {
-+ /* get rx skb buffer index */
-+ index = ((unsigned int)tp->rx_cur_desc - rx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+ if (rx_skb[dev_index][index])
-+ {
-+ skb_reserve (rx_skb[dev_index][index], 2); /* 16 byte align the IP fields. */
-+ rx_skb[dev_index][index]->dev = dev;
-+ rx_skb[dev_index][index]->ip_summed = CHECKSUM_UNNECESSARY;
-+ skb_put(rx_skb[dev_index][index],pkt_size);
-+ rx_skb[dev_index][index]->protocol = eth_type_trans(rx_skb[dev_index][index],dev); /* set skb protocol */
-+ netif_rx(rx_skb[dev_index][index]); /* socket rx */
-+ dev->last_rx = jiffies;
-+
-+ /* allocate rx skb buffer */
-+ if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL) /* allocate socket buffer */
-+ {
-+ printk("%s::skb buffer allocation fail !\n",__func__);
-+ }
-+ rx_skb[dev_index][index] = skb;
-+ tp->rx_cur_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02; /* insert two bytes in the beginning of rx data */
-+ }
-+ else
-+ {
-+ printk("%s::rx skb index error !\n",__func__);
-+ }
-+ }
-+
-+ tp->rx_cur_desc->frame_ctrl.bits_rx.own = DMA; /* release rx descriptor to DMA */
-+ /* point to next rx descriptor */
-+ tp->rx_cur_desc = (GMAC_DESCRIPTOR_T *)((tp->rx_cur_desc->next_desc.next_descriptor & 0xfffffff0)+rx_desc_virtual_base[dev_index]);
-+
-+ /* release buffer to Remaining Buffer Number Register */
-+ if (flow_control_enable[dev_index] ==1)
-+ {
-+// gmac_write_reg(gmac_base_addr[dev_index] + GMAC_BNCR,desc_count,0x0000ffff);
-+ writel(desc_count,(unsigned int *)(gmac_base_addr[dev_index] + GMAC_BNCR));
-+ }
-+
-+ if (work++ >= quota )
-+ {
-+ break;
-+ }
-+ }
-+
-+ /* if RX DMA process is stoped , restart it */
-+ rxdma_busy.bits.rd_first_des_ptr = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_FIRST_DESC);
-+ if (rxdma_busy.bits.rd_busy == 0)
-+ {
-+ rxdma_ctrl.bits32 = 0;
-+ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */
-+ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */
-+ rxdma_ctrl_mask.bits32 = 0;
-+ rxdma_ctrl_mask.bits.rd_start = 1;
-+ rxdma_ctrl_mask.bits.rd_continue = 1;
-+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32);
-+ }
-+
-+ dev->quota -= work;
-+ *budget -= work;
-+ if (work_done==1)
-+ {
-+ /* Receive descriptor is empty now */
-+ netif_rx_complete(dev);
-+ /* enable receive interrupt */
-+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,0x0007c000,0x0007c000); /* enable rx interrupt */
-+ return 0;
-+ }
-+ else
-+ {
-+ return -1;
-+ }
-+}
-+
-+#endif
-+
-+static void gmac_rx_packet(struct net_device *dev)
-+{
-+ struct gmac_private *tp = dev->priv;
-+ struct sk_buff *skb;
-+ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask;
-+ GMAC_RXDMA_FIRST_DESC_T rxdma_busy;
-+ GMAC_DESCRIPTOR_T *rx_desc;
-+ unsigned int pkt_size;
-+ unsigned int desc_count;
-+ unsigned int vid;
-+// unsigned int priority;
-+ unsigned int own;
-+ unsigned int good_frame = 0;
-+ unsigned int i,index;
-+ unsigned int dev_index;
-+
-+ dev_index = gmac_select_interface(dev);
-+
-+ for (i=0;i<256;i++)
-+ {
-+ own = tp->rx_cur_desc->frame_ctrl.bits32 >> 31;
-+ if (own == CPU) /* check owner bit */
-+ {
-+ rx_desc = tp->rx_cur_desc;
-+#if (GMAC_DEBUG==1)
-+ /* check error interrupt */
-+ if ( (rx_desc->frame_ctrl.bits_rx.derr==1)||(rx_desc->frame_ctrl.bits_rx.perr==1) )
-+ {
-+ printk("%s::Rx Descriptor Processing Error !!!\n",__func__);
-+ }
-+#endif
-+ /* get frame information from the first descriptor of the frame */
-+ pkt_size = rx_desc->flag_status.bits_rx_status.frame_count - 4; /*total byte count in a frame*/
-+#if (GMAC_DEBUG==1)
-+ priority = rx_desc->flag_status.bits_rx_status.priority; /* 802.1p priority */
-+#endif
-+ vid = rx_desc->flag_status.bits_rx_status.vlan_id; /* 802.1q vlan id */
-+ if (vid == 0)
-+ {
-+ vid = 1; /* default vlan */
-+ }
-+ desc_count = rx_desc->frame_ctrl.bits_rx.desc_count; /* get descriptor count per frame */
-+
-+ if (rx_desc->frame_ctrl.bits_rx.frame_state == 0x000) /* good frame */
-+ {
-+ tp->stats.rx_bytes += pkt_size;
-+ tp->stats.rx_packets++;
-+ good_frame = 1;
-+ }
-+ else
-+ {
-+ tp->stats.rx_errors++;
-+ good_frame = 0;
-+ printk("RX status: 0x%x\n",rx_desc->frame_ctrl.bits_rx.frame_state);
-+ }
-+ }
-+ else
-+ {
-+ break; /* Rx process is completed */
-+ }
-+
-+ if (good_frame == 1)
-+ {
-+ /* get rx skb buffer index */
-+ index = ((unsigned int)tp->rx_cur_desc - rx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+ if (rx_skb[dev_index][index])
-+ {
-+ skb_reserve (rx_skb[dev_index][index], 2); /* 16 byte align the IP fields. */
-+ rx_skb[dev_index][index]->dev = dev;
-+ rx_skb[dev_index][index]->ip_summed = CHECKSUM_UNNECESSARY;
-+ skb_put(rx_skb[dev_index][index],pkt_size);
-+ rx_skb[dev_index][index]->protocol = eth_type_trans(rx_skb[dev_index][index],dev); /* set skb protocol */
-+ netif_rx(rx_skb[dev_index][index]); /* socket rx */
-+ dev->last_rx = jiffies;
-+
-+ /* allocate rx skb buffer */
-+ if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL) /* allocate socket buffer */
-+ {
-+ printk("%s::skb buffer allocation fail !\n",__func__);
-+ }
-+ rx_skb[dev_index][index] = skb;
-+ tp->rx_cur_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02; /* insert two bytes in the beginning of rx data */
-+ }
-+ else
-+ {
-+ printk("%s::rx skb index error !\n",__func__);
-+ }
-+ }
-+
-+ tp->rx_cur_desc->frame_ctrl.bits_rx.own = DMA; /* release rx descriptor to DMA */
-+ /* point to next rx descriptor */
-+ tp->rx_cur_desc = (GMAC_DESCRIPTOR_T *)((tp->rx_cur_desc->next_desc.next_descriptor & 0xfffffff0)+rx_desc_virtual_base[dev_index]);
-+
-+ /* release buffer to Remaining Buffer Number Register */
-+ if (flow_control_enable[dev_index] ==1)
-+ {
-+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_BNCR,desc_count,0x0000ffff);
-+ }
-+ }
-+
-+ /* if RX DMA process is stoped , restart it */
-+ rxdma_busy.bits.rd_first_des_ptr = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_FIRST_DESC);
-+ if (rxdma_busy.bits.rd_busy == 0)
-+ {
-+ rxdma_ctrl.bits32 = 0;
-+ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */
-+ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */
-+ rxdma_ctrl_mask.bits32 = 0;
-+ rxdma_ctrl_mask.bits.rd_start = 1;
-+ rxdma_ctrl_mask.bits.rd_continue = 1;
-+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32);
-+ }
-+}
-+
-+#ifdef CONFIG_SL2312_MPAGE
-+static inline void free_tx_buf(int dev_index, int desc_index)
-+{
-+ if (tx_skb[dev_index][desc_index].freeable &&
-+ tx_skb[dev_index][desc_index].skb) {
-+ struct sk_buff* skb = tx_skb[dev_index][desc_index].skb;
-+ //printk("free_skb %x, len %d\n", skb, skb->len);
-+#ifdef CONFIG_TXINT_DISABLE
-+ dev_kfree_skb(skb);
-+#else
-+ dev_kfree_skb_irq(skb);
-+#endif
-+ tx_skb[dev_index][desc_index].skb = 0;
-+ }
-+}
-+
-+#ifdef CONFIG_TXINT_DISABLE
-+static void gmac_tx_packet_complete(struct net_device *dev)
-+{
-+ struct gmac_private *tp = dev->priv;
-+ GMAC_DESCRIPTOR_T *tx_hw_complete_desc, *next_desc;
-+ unsigned int desc_cnt=0;
-+ unsigned int i,index,dev_index;
-+ unsigned int tx_current_descriptor = 0;
-+ // int own_dma = 0;
-+
-+ dev_index = gmac_select_interface(dev);
-+
-+ index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+ if (tx_skb[dev_index][index].desc_in_use && tp->tx_finished_desc->frame_ctrl.bits_tx_in.own == CPU) {
-+ free_tx_buf(dev_index, index);
-+ tx_skb[dev_index][index].desc_in_use = 0;
-+ }
-+ next_desc = (GMAC_DESCRIPTOR_T*)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]);
-+
-+ for (;;) {
-+ tx_hw_complete_desc = (GMAC_DESCRIPTOR_T *)((gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC) & 0xfffffff0)+ tx_desc_virtual_base[dev_index]);
-+ if (next_desc == tx_hw_complete_desc)
-+ break;
-+ if (next_desc->frame_ctrl.bits_tx_in.own == CPU) {
-+ if (next_desc->frame_ctrl.bits_tx_in.success_tx == 1) {
-+ tp->stats.tx_bytes += next_desc->flag_status.bits_tx_flag.frame_count;
-+ tp->stats.tx_packets ++;
-+ } else {
-+ tp->stats.tx_errors++;
-+ }
-+ desc_cnt = next_desc->frame_ctrl.bits_tx_in.desc_count;
-+ for (i=1; i<desc_cnt; i++) {
-+ /* get tx skb buffer index */
-+ index = ((unsigned int)next_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+ next_desc->frame_ctrl.bits_tx_in.own = CPU;
-+ free_tx_buf(dev_index, index);
-+ tx_skb[dev_index][index].desc_in_use = 0;
-+ tp->tx_desc_tail[dev_index] = (tp->tx_desc_tail[dev_index] +1) & (TX_DESC_NUM-1);
-+ /* release Tx descriptor to CPU */
-+ next_desc = (GMAC_DESCRIPTOR_T *)((next_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]);
-+ }
-+ /* get tx skb buffer index */
-+ index = ((unsigned int)next_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+ /* free skb buffer */
-+ next_desc->frame_ctrl.bits_tx_in.own = CPU;
-+ free_tx_buf(dev_index, index);
-+ tx_skb[dev_index][index].desc_in_use = 0;
-+ tp->tx_desc_tail[dev_index] = (tp->tx_desc_tail[dev_index] +1) & (TX_DESC_NUM-1);
-+ tp->tx_finished_desc = next_desc;
-+// printk("finish tx_desc index %d\n", index);
-+ next_desc = (GMAC_DESCRIPTOR_T *)((next_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]);
-+ }
-+ else
-+ break;
-+ }
-+ if (netif_queue_stopped(dev))
-+ {
-+ netif_wake_queue(dev);
-+ }
-+
-+}
-+#else
-+static void gmac_tx_packet_complete(struct net_device *dev)
-+{
-+ struct gmac_private *tp = dev->priv;
-+ GMAC_DESCRIPTOR_T *tx_hw_complete_desc;
-+ unsigned int desc_cnt=0;
-+ unsigned int i,index,dev_index;
-+ unsigned int tx_current_descriptor = 0;
-+ // int own_dma = 0;
-+
-+ dev_index = gmac_select_interface(dev);
-+
-+ index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+
-+ /* check tx status and accumulate tx statistics */
-+ for (;;)
-+ {
-+
-+ for (i=0;i<1000;i++)
-+ {
-+ tx_current_descriptor = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC);
-+ if ( ((tx_current_descriptor & 0x00000003)==0x00000003) || /* only one descriptor */
-+ ((tx_current_descriptor & 0x00000003)==0x00000001) ) /* the last descriptor */
-+ {
-+ break;
-+ }
-+ udelay(1);
-+ }
-+ if (i==1000)
-+ {
-+// gmac_dump_register(dev);
-+// printk("%s: tx current descriptor = %x \n",__func__,tx_current_descriptor);
-+// printk_all(dev_index, tp);
-+ continue;
-+ }
-+
-+ /* get tx H/W completed descriptor virtual address */
-+ tx_hw_complete_desc = (GMAC_DESCRIPTOR_T *)((tx_current_descriptor & 0xfffffff0)+ tx_desc_virtual_base[dev_index]);
-+// tx_hw_complete_desc = (GMAC_DESCRIPTOR_T *)((gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC) & 0xfffffff0)+ tx_desc_virtual_base[dev_index]);
-+ if (tp->tx_finished_desc == tx_hw_complete_desc ) // ||
-+ //tx_skb[dev_index][index].desc_in_use ) /* complete tx processing */
-+ {
-+ break;
-+ }
-+
-+ for (;;)
-+ {
-+ if (tp->tx_finished_desc->frame_ctrl.bits_tx_in.own == CPU)
-+ {
-+ #if (GMAC_DEBUG==1)
-+ if ( (tp->tx_finished_desc->frame_ctrl.bits_tx_in.derr) ||
-+ (tp->tx_finished_desc->frame_ctrl.bits_tx_in.perr) )
-+ {
-+ printk("%s::Descriptor Processing Error !!!\n",__func__);
-+ }
-+ #endif
-+ if (tp->tx_finished_desc->frame_ctrl.bits_tx_in.success_tx == 1)
-+ {
-+ tp->stats.tx_bytes += tp->tx_finished_desc->flag_status.bits_tx_flag.frame_count;
-+ tp->stats.tx_packets ++;
-+ }
-+ else
-+ {
-+ tp->stats.tx_errors++;
-+ }
-+ desc_cnt = tp->tx_finished_desc->frame_ctrl.bits_tx_in.desc_count;
-+ for (i=1; i<desc_cnt; i++) /* multi-descriptor in one packet */
-+ {
-+ /* get tx skb buffer index */
-+ index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+ tp->tx_finished_desc->frame_ctrl.bits_tx_in.own = CPU;
-+ free_tx_buf(dev_index, index);
-+ tx_skb[dev_index][index].desc_in_use = 0;
-+ /* release Tx descriptor to CPU */
-+ tp->tx_finished_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]);
-+ }
-+ /* get tx skb buffer index */
-+ index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+ /* free skb buffer */
-+ tp->tx_finished_desc->frame_ctrl.bits_tx_in.own = CPU;
-+ free_tx_buf(dev_index, index);
-+ tx_skb[dev_index][index].desc_in_use = 0;
-+ tp->tx_finished_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]);
-+
-+ if (tp->tx_finished_desc == tx_hw_complete_desc )
-+ {
-+ break;
-+ }
-+ }
-+ else
-+ {
-+ break;
-+ }
-+ }
-+ }
-+
-+ if (netif_queue_stopped(dev))
-+ {
-+ netif_wake_queue(dev);
-+ }
-+
-+}
-+#endif
-+#else
-+
-+static void gmac_tx_packet_complete(struct net_device *dev)
-+{
-+ struct gmac_private *tp = dev->priv;
-+ GMAC_DESCRIPTOR_T *tx_hw_complete_desc;
-+ unsigned int desc_cnt=0;
-+ unsigned int i,index,dev_index;
-+
-+ dev_index = gmac_select_interface(dev);
-+
-+ /* get tx H/W completed descriptor virtual address */
-+ tx_hw_complete_desc = (GMAC_DESCRIPTOR_T *)((gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC) & 0xfffffff0)+ tx_desc_virtual_base[dev_index]);
-+ /* check tx status and accumulate tx statistics */
-+ for (;;)
-+ {
-+ if (tp->tx_finished_desc == tx_hw_complete_desc) /* complete tx processing */
-+ {
-+ break;
-+ }
-+ if (tp->tx_finished_desc->frame_ctrl.bits_tx_in.own == CPU)
-+ {
-+#if (GMAC_DEBUG==1)
-+ if ( (tp->tx_finished_desc->frame_ctrl.bits_tx_in.derr) ||
-+ (tp->tx_finished_desc->frame_ctrl.bits_tx_in.perr) )
-+ {
-+ printk("%s::Descriptor Processing Error !!!\n",__func__);
-+ }
-+#endif
-+ if (tp->tx_finished_desc->frame_ctrl.bits_tx_in.success_tx == 1)
-+ {
-+ tp->stats.tx_bytes += tp->tx_finished_desc->flag_status.bits_tx_flag.frame_count;
-+ tp->stats.tx_packets ++;
-+ }
-+ else
-+ {
-+ tp->stats.tx_errors++;
-+ }
-+ desc_cnt = tp->tx_finished_desc->frame_ctrl.bits_tx_in.desc_count;
-+ for (i=1; i<desc_cnt; i++) /* multi-descriptor in one packet */
-+ {
-+ /* get tx skb buffer index */
-+ index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+ /* free skb buffer */
-+ if (tx_skb[dev_index][index])
-+ {
-+ dev_kfree_skb_irq(tx_skb[dev_index][index]);
-+ }
-+ /* release Tx descriptor to CPU */
-+ tp->tx_finished_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]);
-+ tp->tx_finished_desc->frame_ctrl.bits_tx_in.own = CPU;
-+ }
-+ /* get tx skb buffer index */
-+ index = ((unsigned int)tp->tx_finished_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+ /* free skb buffer */
-+ if (tx_skb[dev_index][index])
-+ {
-+ dev_kfree_skb_irq(tx_skb[dev_index][index]);
-+ }
-+ tp->tx_finished_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_finished_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]);
-+ }
-+ }
-+
-+ if (netif_queue_stopped(dev))
-+ {
-+ netif_wake_queue(dev);
-+ }
-+
-+}
-+
-+
-+#endif
-+
-+#if 0
-+static void gmac_weird_interrupt(struct net_device *dev)
-+{
-+ gmac_dump_register(dev);
-+}
-+#endif
-+
-+/* The interrupt handler does all of the Rx thread work and cleans up
-+ after the Tx thread. */
-+static irqreturn_t gmac_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
-+{
-+ struct net_device *dev = (struct net_device *)dev_instance;
-+ GMAC_RXDMA_FIRST_DESC_T rxdma_busy;
-+// GMAC_TXDMA_FIRST_DESC_T txdma_busy;
-+// GMAC_TXDMA_CTRL_T txdma_ctrl,txdma_ctrl_mask;
-+ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask;
-+ GMAC_DMA_STATUS_T status;
-+ unsigned int i,dev_index;
-+ int handled = 0;
-+
-+ dev_index = gmac_select_interface(dev);
-+
-+ handled = 1;
-+
-+#ifdef CONFIG_SL_NAPI
-+ disable_irq(gmac_irq[dev_index]); /* disable GMAC interrupt */
-+
-+ status.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_DMA_STATUS); /* read DMA status */
-+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_DMA_STATUS,status.bits32,status.bits32); /* clear DMA status */
-+
-+ if (status.bits.rx_overrun == 1)
-+ {
-+ printk("%s::RX Overrun !!!%d\n",__func__,gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RBNR));
-+ gmac_dump_register(dev);
-+ /* if RX DMA process is stoped , restart it */
-+ rxdma_busy.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_FIRST_DESC) ;
-+ if (rxdma_busy.bits.rd_busy == 0)
-+ {
-+ /* restart Rx DMA process */
-+ rxdma_ctrl.bits32 = 0;
-+ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */
-+ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */
-+ rxdma_ctrl_mask.bits32 = 0;
-+ rxdma_ctrl_mask.bits.rd_start = 1;
-+ rxdma_ctrl_mask.bits.rd_continue = 1;
-+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32);
-+ }
-+ }
-+
-+ /* process rx packet */
-+ if (netif_running(dev) && ((status.bits.rs_eofi==1)||(status.bits.rs_finish==1)))
-+ {
-+ if (likely(netif_rx_schedule_prep(dev)))
-+ {
-+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,0,0x0007c000); /* disable rx interrupt */
-+ __netif_rx_schedule(dev);
-+ }
-+ }
-+#ifndef CONFIG_TXINT_DISABLE
-+ /* process tx packet */
-+ if (netif_running(dev) && ((status.bits.ts_eofi==1)||(status.bits.ts_finish==1)))
-+ {
-+ gmac_tx_packet_complete(dev);
-+ }
-+#endif
-+
-+ enable_irq(gmac_irq[dev_index]); /* enable GMAC interrupt */
-+ return IRQ_RETVAL(handled);
-+#endif
-+
-+ /* disable GMAC interrupt */
-+ disable_irq(gmac_irq[dev_index]);
-+ for (i=0;i<MAX_ISR_WORK;i++)
-+ {
-+ /* read DMA status */
-+ status.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_DMA_STATUS);
-+int_status = status.bits32;
-+ /* clear DMA status */
-+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_DMA_STATUS,status.bits32,status.bits32);
-+
-+ if ((status.bits32 & 0xffffc000)==0)
-+ {
-+ break;
-+ }
-+
-+ if (status.bits.rx_overrun == 1)
-+ {
-+ printk("%s::RX Overrun !!!%d\n",__func__,gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RBNR));
-+ gmac_dump_register(dev);
-+ /* if RX DMA process is stoped , restart it */
-+ rxdma_busy.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_FIRST_DESC) ;
-+ if (rxdma_busy.bits.rd_busy == 0)
-+ {
-+ /* restart Rx DMA process */
-+ rxdma_ctrl.bits32 = 0;
-+ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */
-+ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */
-+ rxdma_ctrl_mask.bits32 = 0;
-+ rxdma_ctrl_mask.bits.rd_start = 1;
-+ rxdma_ctrl_mask.bits.rd_continue = 1;
-+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32);
-+ }
-+ }
-+
-+ /* receive rx interrupt */
-+ if (netif_running(dev) && ((status.bits.rs_eofi==1)||(status.bits.rs_finish==1)))
-+ {
-+ gmac_rx_packet(dev);
-+// gmac_tx_packet_complete(dev);
-+ }
-+
-+ /* receive tx interrupt */
-+ // if (netif_running(dev) && (status.bits.ts_finish==1))
-+#ifndef CONFIG_TXINT_DISABLE
-+ if (netif_running(dev) && ((status.bits.ts_eofi==1)||
-+ (status.bits.ts_finish==1)))
-+ {
-+ gmac_tx_packet_complete(dev);
-+ }
-+#endif
-+ /* check uncommon events */
-+/* if ((status.bits32 & 0x632fc000)!=0)
-+ {
-+ printk("%s::DMA Status = %08x \n",__func__,status.bits32);
-+ gmac_weird_interrupt(dev);
-+ }
-+*/
-+ }
-+
-+ /* enable GMAC interrupt */
-+ enable_irq(gmac_irq[dev_index]);
-+ //printk("gmac_interrupt complete!\n\n");
-+ return IRQ_RETVAL(handled);
-+}
-+
-+static void gmac_hw_start(struct net_device *dev)
-+{
-+ struct gmac_private *tp = dev->priv;
-+ GMAC_TXDMA_CURR_DESC_T tx_desc;
-+ GMAC_RXDMA_CURR_DESC_T rx_desc;
-+ GMAC_TXDMA_CTRL_T txdma_ctrl,txdma_ctrl_mask;
-+ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask;
-+ GMAC_DMA_STATUS_T dma_status,dma_status_mask;
-+ int dev_index;
-+
-+ dev_index = gmac_select_interface(dev);
-+
-+ /* program TxDMA Current Descriptor Address register for first descriptor */
-+ tx_desc.bits32 = (unsigned int)(tp->tx_desc_dma);
-+ tx_desc.bits.eofie = 1;
-+ tx_desc.bits.sof_eof = 0x03;
-+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC,tx_desc.bits32,0xffffffff);
-+ gmac_write_reg(gmac_base_addr[dev_index] + 0xff2c,tx_desc.bits32,0xffffffff); /* tx next descriptor address */
-+
-+ /* program RxDMA Current Descriptor Address register for first descriptor */
-+ rx_desc.bits32 = (unsigned int)(tp->rx_desc_dma);
-+ rx_desc.bits.eofie = 1;
-+ rx_desc.bits.sof_eof = 0x03;
-+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CURR_DESC,rx_desc.bits32,0xffffffff);
-+ gmac_write_reg(gmac_base_addr[dev_index] + 0xff3c,rx_desc.bits32,0xffffffff); /* rx next descriptor address */
-+
-+ /* enable GMAC interrupt & disable loopback */
-+ dma_status.bits32 = 0;
-+ dma_status.bits.loop_back = 0; /* disable DMA loop-back mode */
-+// dma_status.bits.m_tx_fail = 1;
-+ dma_status.bits.m_cnt_full = 1;
-+ dma_status.bits.m_rx_pause_on = 1;
-+ dma_status.bits.m_tx_pause_on = 1;
-+ dma_status.bits.m_rx_pause_off = 1;
-+ dma_status.bits.m_tx_pause_off = 1;
-+ dma_status.bits.m_rx_overrun = 1;
-+ dma_status.bits.m_link_change = 1;
-+ dma_status_mask.bits32 = 0;
-+ dma_status_mask.bits.loop_back = 1;
-+// dma_status_mask.bits.m_tx_fail = 1;
-+ dma_status_mask.bits.m_cnt_full = 1;
-+ dma_status_mask.bits.m_rx_pause_on = 1;
-+ dma_status_mask.bits.m_tx_pause_on = 1;
-+ dma_status_mask.bits.m_rx_pause_off = 1;
-+ dma_status_mask.bits.m_tx_pause_off = 1;
-+ dma_status_mask.bits.m_rx_overrun = 1;
-+ dma_status_mask.bits.m_link_change = 1;
-+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_DMA_STATUS,dma_status.bits32,dma_status_mask.bits32);
-+
-+ /* program tx dma control register */
-+ txdma_ctrl.bits32 = 0;
-+ txdma_ctrl.bits.td_start = 0; /* start TX DMA transfer */
-+ txdma_ctrl.bits.td_continue = 0; /* continue Tx DMA operation */
-+ txdma_ctrl.bits.td_chain_mode = 1; /* chain mode */
-+ txdma_ctrl.bits.td_prot = 0;
-+ txdma_ctrl.bits.td_burst_size = 2; /* DMA burst size for every AHB request */
-+ txdma_ctrl.bits.td_bus = 2; /* peripheral bus width */
-+ txdma_ctrl.bits.td_endian = 0; /* little endian */
-+#ifdef CONFIG_TXINT_DISABLE
-+ txdma_ctrl.bits.td_finish_en = 0; /* DMA finish event interrupt disable */
-+#else
-+ txdma_ctrl.bits.td_finish_en = 1; /* DMA finish event interrupt enable */
-+#endif
-+ txdma_ctrl.bits.td_fail_en = 1; /* DMA fail interrupt enable */
-+ txdma_ctrl.bits.td_perr_en = 1; /* protocol failure interrupt enable */
-+ txdma_ctrl.bits.td_eod_en = 0; /* disable Tx End of Descriptor Interrupt */
-+ //txdma_ctrl.bits.td_eod_en = 0; /* disable Tx End of Descriptor Interrupt */
-+#ifdef CONFIG_TXINT_DISABLE
-+ txdma_ctrl.bits.td_eof_en = 0; /* end of frame interrupt disable */
-+#else
-+ txdma_ctrl.bits.td_eof_en = 1; /* end of frame interrupt enable */
-+#endif
-+ txdma_ctrl_mask.bits32 = 0;
-+ txdma_ctrl_mask.bits.td_start = 1;
-+ txdma_ctrl_mask.bits.td_continue = 1;
-+ txdma_ctrl_mask.bits.td_chain_mode = 1;
-+ txdma_ctrl_mask.bits.td_prot = 15;
-+ txdma_ctrl_mask.bits.td_burst_size = 3;
-+ txdma_ctrl_mask.bits.td_bus = 3;
-+ txdma_ctrl_mask.bits.td_endian = 1;
-+ txdma_ctrl_mask.bits.td_finish_en = 1;
-+ txdma_ctrl_mask.bits.td_fail_en = 1;
-+ txdma_ctrl_mask.bits.td_perr_en = 1;
-+ txdma_ctrl_mask.bits.td_eod_en = 1;
-+ //txdma_ctrl_mask.bits.td_eod_en = 1;
-+ txdma_ctrl_mask.bits.td_eof_en = 1;
-+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CTRL,txdma_ctrl.bits32,txdma_ctrl_mask.bits32);
-+
-+ /* program rx dma control register */
-+ rxdma_ctrl.bits32 = 0;
-+ rxdma_ctrl.bits.rd_start = 1; /* start RX DMA transfer */
-+ rxdma_ctrl.bits.rd_continue = 1; /* continue RX DMA operation */
-+ rxdma_ctrl.bits.rd_chain_mode = 1; /* chain mode */
-+ rxdma_ctrl.bits.rd_prot = 0;
-+ rxdma_ctrl.bits.rd_burst_size = 2; /* DMA burst size for every AHB request */
-+ rxdma_ctrl.bits.rd_bus = 2; /* peripheral bus width */
-+ rxdma_ctrl.bits.rd_endian = 0; /* little endian */
-+ rxdma_ctrl.bits.rd_finish_en = 1; /* DMA finish event interrupt enable */
-+ rxdma_ctrl.bits.rd_fail_en = 1; /* DMA fail interrupt enable */
-+ rxdma_ctrl.bits.rd_perr_en = 1; /* protocol failure interrupt enable */
-+ rxdma_ctrl.bits.rd_eod_en = 0; /* disable Rx End of Descriptor Interrupt */
-+ rxdma_ctrl.bits.rd_eof_en = 1; /* end of frame interrupt enable */
-+ rxdma_ctrl_mask.bits32 = 0;
-+ rxdma_ctrl_mask.bits.rd_start = 1;
-+ rxdma_ctrl_mask.bits.rd_continue = 1;
-+ rxdma_ctrl_mask.bits.rd_chain_mode = 1;
-+ rxdma_ctrl_mask.bits.rd_prot = 15;
-+ rxdma_ctrl_mask.bits.rd_burst_size = 3;
-+ rxdma_ctrl_mask.bits.rd_bus = 3;
-+ rxdma_ctrl_mask.bits.rd_endian = 1;
-+ rxdma_ctrl_mask.bits.rd_finish_en = 1;
-+ rxdma_ctrl_mask.bits.rd_fail_en = 1;
-+ rxdma_ctrl_mask.bits.rd_perr_en = 1;
-+ rxdma_ctrl_mask.bits.rd_eod_en = 1;
-+ rxdma_ctrl_mask.bits.rd_eof_en = 1;
-+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32);
-+ return;
-+}
-+
-+static void gmac_hw_stop(struct net_device *dev)
-+{
-+ GMAC_TXDMA_CTRL_T txdma_ctrl,txdma_ctrl_mask;
-+ GMAC_RXDMA_CTRL_T rxdma_ctrl,rxdma_ctrl_mask;
-+ int dev_index;
-+
-+ dev_index = gmac_select_interface(dev);
-+
-+ /* program tx dma control register */
-+ txdma_ctrl.bits32 = 0;
-+ txdma_ctrl.bits.td_start = 0;
-+ txdma_ctrl.bits.td_continue = 0;
-+ txdma_ctrl_mask.bits32 = 0;
-+ txdma_ctrl_mask.bits.td_start = 1;
-+ txdma_ctrl_mask.bits.td_continue = 1;
-+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CTRL,txdma_ctrl.bits32,txdma_ctrl_mask.bits32);
-+ /* program rx dma control register */
-+ rxdma_ctrl.bits32 = 0;
-+ rxdma_ctrl.bits.rd_start = 0; /* stop RX DMA transfer */
-+ rxdma_ctrl.bits.rd_continue = 0; /* stop continue RX DMA operation */
-+ rxdma_ctrl_mask.bits32 = 0;
-+ rxdma_ctrl_mask.bits.rd_start = 1;
-+ rxdma_ctrl_mask.bits.rd_continue = 1;
-+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RXDMA_CTRL,rxdma_ctrl.bits32,rxdma_ctrl_mask.bits32);
-+}
-+
-+static int gmac_init_desc_buf(struct net_device *dev)
-+{
-+ struct gmac_private *tp = dev->priv;
-+ struct sk_buff *skb;
-+ dma_addr_t tx_first_desc_dma=0;
-+ dma_addr_t rx_first_desc_dma=0;
-+ dma_addr_t rx_first_buf_dma=0;
-+ unsigned int i,index;
-+
-+ printk("Descriptor buffer init......\n");
-+
-+ /* get device index number */
-+ index = gmac_get_dev_index(dev);
-+#ifdef CONFIG_SL2312_MPAGE
-+ for (i=0; i<TX_DESC_NUM; i++) {
-+ tx_skb[index][i].freeable = 0;
-+ tx_skb[index][i].skb = 0;
-+ tx_skb[index][i].desc_in_use = 0;
-+ tx_skb[index][i].end_seq = 0;
-+ }
-+#else
-+ for (i=0;i<TX_DESC_NUM;i++)
-+ {
-+ tx_skb[index][i] = NULL;
-+ }
-+#endif
-+ for (i=0;i<RX_DESC_NUM;i++)
-+ {
-+ rx_skb[index][i] = NULL;
-+ }
-+
-+ /* allocates TX/RX descriptors */
-+ tp->tx_desc = DMA_MALLOC(TX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),(dma_addr_t *)&tp->tx_desc_dma);
-+ tx_desc_virtual_base[index] = (unsigned int)tp->tx_desc - (unsigned int)tp->tx_desc_dma;
-+ memset(tp->tx_desc,0x00,TX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T));
-+ tp->rx_desc = DMA_MALLOC(RX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),(dma_addr_t *)&tp->rx_desc_dma);
-+ rx_desc_virtual_base[index] = (unsigned int)tp->rx_desc - (unsigned int)tp->rx_desc_dma;
-+ memset(tp->rx_desc,0x00,RX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T));
-+ tx_desc_start_adr[index] = (unsigned int)tp->tx_desc; /* for tx skb index calculation */
-+ rx_desc_start_adr[index] = (unsigned int)tp->rx_desc; /* for rx skb index calculation */
-+ printk("tx_desc = %08x\n",(unsigned int)tp->tx_desc);
-+ printk("rx_desc = %08x\n",(unsigned int)tp->rx_desc);
-+ printk("tx_desc_dma = %08x\n",tp->tx_desc_dma);
-+ printk("rx_desc_dma = %08x\n",tp->rx_desc_dma);
-+
-+ if (tp->tx_desc==0x00 || tp->rx_desc==0x00)
-+ {
-+ free_irq(dev->irq, dev);
-+
-+ if (tp->tx_desc)
-+ DMA_MFREE(tp->tx_desc, TX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),tp->tx_desc_dma);
-+ if (tp->rx_desc)
-+ DMA_MFREE(tp->rx_desc, RX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),tp->rx_desc_dma);
-+ return -ENOMEM;
-+ }
-+
-+ /* TX descriptors initial */
-+ tp->tx_cur_desc = tp->tx_desc; /* virtual address */
-+ tp->tx_finished_desc = tp->tx_desc; /* virtual address */
-+ tx_first_desc_dma = tp->tx_desc_dma; /* physical address */
-+ for (i = 1; i < TX_DESC_NUM; i++)
-+ {
-+ tp->tx_desc->frame_ctrl.bits_tx_out.own = CPU; /* set owner to CPU */
-+ tp->tx_desc->frame_ctrl.bits_tx_out.buffer_size = TX_BUF_SIZE; /* set tx buffer size for descriptor */
-+ tp->tx_desc_dma = tp->tx_desc_dma + sizeof(GMAC_DESCRIPTOR_T); /* next tx descriptor DMA address */
-+ tp->tx_desc->next_desc.next_descriptor = tp->tx_desc_dma | 0x0000000b;
-+ tp->tx_desc = &tp->tx_desc[1] ; /* next tx descriptor virtual address */
-+ }
-+ /* the last descriptor will point back to first descriptor */
-+ tp->tx_desc->frame_ctrl.bits_tx_out.own = CPU;
-+ tp->tx_desc->frame_ctrl.bits_tx_out.buffer_size = TX_BUF_SIZE;
-+ tp->tx_desc->next_desc.next_descriptor = tx_first_desc_dma | 0x0000000b;
-+ tp->tx_desc = tp->tx_cur_desc;
-+ tp->tx_desc_dma = tx_first_desc_dma;
-+
-+ /* RX descriptors initial */
-+ tp->rx_cur_desc = tp->rx_desc; /* virtual address */
-+ rx_first_desc_dma = tp->rx_desc_dma; /* physical address */
-+ for (i = 1; i < RX_DESC_NUM; i++)
-+ {
-+ if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL) /* allocate socket buffer */
-+ {
-+ printk("%s::skb buffer allocation fail !\n",__func__);
-+ }
-+ rx_skb[index][i-1] = skb;
-+ tp->rx_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02; /* insert two bytes in the beginning of rx data */
-+ tp->rx_desc->frame_ctrl.bits_rx.own = DMA; /* set owner bit to DMA */
-+ tp->rx_desc->frame_ctrl.bits_rx.buffer_size = RX_BUF_SIZE; /* set rx buffer size for descriptor */
-+ tp->rx_bufs_dma = tp->rx_bufs_dma + RX_BUF_SIZE; /* point to next buffer address */
-+ tp->rx_desc_dma = tp->rx_desc_dma + sizeof(GMAC_DESCRIPTOR_T); /* next rx descriptor DMA address */
-+ tp->rx_desc->next_desc.next_descriptor = tp->rx_desc_dma | 0x0000000b;
-+ tp->rx_desc = &tp->rx_desc[1]; /* next rx descriptor virtual address */
-+ }
-+ /* the last descriptor will point back to first descriptor */
-+ if ( (skb = dev_alloc_skb(RX_BUF_SIZE))==NULL) /* allocate socket buffer */
-+ {
-+ printk("%s::skb buffer allocation fail !\n",__func__);
-+ }
-+ rx_skb[index][i-1] = skb;
-+ tp->rx_desc->buf_adr = (unsigned int)__pa(skb->data) | 0x02; /* insert two bytes in the beginning of rx data */
-+ tp->rx_desc->frame_ctrl.bits_rx.own = DMA;
-+ tp->rx_desc->frame_ctrl.bits_rx.buffer_size = RX_BUF_SIZE;
-+ tp->rx_desc->next_desc.next_descriptor = rx_first_desc_dma | 0x0000000b;
-+ tp->rx_desc = tp->rx_cur_desc;
-+ tp->rx_desc_dma = rx_first_desc_dma;
-+ tp->rx_bufs_dma = rx_first_buf_dma;
-+
-+ for (i=0; i<GMAC_PHY_IF; i++) {
-+ tp->tx_desc_hdr[i] = 0;
-+ tp->tx_desc_tail[i] = 0;
-+ }
-+ return (0);
-+}
-+
-+static int gmac_clear_counter (struct net_device *dev)
-+{
-+ struct gmac_private *tp = dev->priv;
-+ unsigned int dev_index;
-+
-+ dev_index = gmac_select_interface(dev);
-+// tp = gmac_dev[index]->priv;
-+ /* clear counter */
-+ gmac_read_reg(gmac_base_addr[dev_index] + GMAC_IN_DISCARDS);
-+ gmac_read_reg(gmac_base_addr[dev_index] + GMAC_IN_ERRORS);
-+ tp->stats.tx_bytes = 0;
-+ tp->stats.tx_packets = 0;
-+ tp->stats.tx_errors = 0;
-+ tp->stats.rx_bytes = 0;
-+ tp->stats.rx_packets = 0;
-+ tp->stats.rx_errors = 0;
-+ tp->stats.rx_dropped = 0;
-+ return (0);
-+}
-+
-+static int gmac_open (struct net_device *dev)
-+{
-+ struct gmac_private *tp = dev->priv;
-+ int retval;
-+
-+ gmac_select_interface(dev);
-+
-+ /* chip reset */
-+ gmac_sw_reset(dev);
-+
-+ /* allocates tx/rx descriptor and buffer memory */
-+ gmac_init_desc_buf(dev);
-+
-+ /* get mac address from FLASH */
-+ gmac_get_mac_address();
-+
-+ /* set PHY register to start autonegition process */
-+ gmac_set_phy_status(dev);
-+
-+ /* GMAC initialization */
-+ if (gmac_init_chip(dev))
-+ {
-+ printk (KERN_ERR "GMAC init fail\n");
-+ }
-+
-+ /* start DMA process */
-+ gmac_hw_start(dev);
-+
-+ /* enable tx/rx register */
-+ gmac_enable_tx_rx(dev);
-+
-+ /* clear statistic counter */
-+ gmac_clear_counter(dev);
-+
-+ netif_start_queue (dev);
-+
-+ /* hook ISR */
-+ retval = request_irq (dev->irq, gmac_interrupt, SA_INTERRUPT, dev->name, dev);
-+ if (retval)
-+ return retval;
-+
-+ if(!FLAG_SWITCH)
-+ {
-+ init_waitqueue_head (&tp->thr_wait);
-+ init_completion(&tp->thr_exited);
-+
-+ tp->time_to_die = 0;
-+ tp->thr_pid = kernel_thread (gmac_phy_thread, dev, CLONE_FS | CLONE_FILES);
-+ if (tp->thr_pid < 0)
-+ {
-+ printk (KERN_WARNING "%s: unable to start kernel thread\n",dev->name);
-+ }
-+ }
-+ return (0);
-+}
-+
-+static int gmac_close(struct net_device *dev)
-+{
-+ struct gmac_private *tp = dev->priv;
-+ unsigned int i,dev_index;
-+ unsigned int ret;
-+
-+ dev_index = gmac_get_dev_index(dev);
-+
-+ /* stop tx/rx packet */
-+ gmac_disable_tx_rx(dev);
-+
-+ /* stop the chip's Tx and Rx DMA processes */
-+ gmac_hw_stop(dev);
-+
-+ netif_stop_queue(dev);
-+
-+ /* disable interrupts by clearing the interrupt mask */
-+ synchronize_irq();
-+ free_irq(dev->irq,dev);
-+
-+ DMA_MFREE(tp->tx_desc, TX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),(unsigned int)tp->tx_desc_dma);
-+ DMA_MFREE(tp->rx_desc, RX_DESC_NUM*sizeof(GMAC_DESCRIPTOR_T),(unsigned int)tp->rx_desc_dma);
-+
-+#ifdef CONFIG_SL2312_MPAGE
-+// kfree(tx_skb);
-+#endif
-+
-+ for (i=0;i<RX_DESC_NUM;i++)
-+ {
-+ if (rx_skb[dev_index][i])
-+ {
-+ dev_kfree_skb(rx_skb[dev_index][i]);
-+ }
-+ }
-+ if(!FLAG_SWITCH)
-+ {
-+ if (tp->thr_pid >= 0)
-+ {
-+ tp->time_to_die = 1;
-+ wmb();
-+ ret = kill_proc (tp->thr_pid, SIGTERM, 1);
-+ if (ret)
-+ {
-+ printk (KERN_ERR "%s: unable to signal thread\n", dev->name);
-+ return ret;
-+ }
-+// wait_for_completion (&tp->thr_exited);
-+ }
-+ }
-+
-+ return (0);
-+}
-+
-+#ifdef CONFIG_SL2312_MPAGE
-+int printk_all(int dev_index, struct gmac_private* tp)
-+{
-+ int i=0;
-+ unsigned int tx_current_descriptor = 0;
-+ int hw_index;
-+ int fi;
-+ GMAC_DESCRIPTOR_T* tmp_desc;
-+
-+ GMAC_DESCRIPTOR_T* cur_desc=tp->tx_cur_desc;
-+ fi = ((unsigned int)cur_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+ printk("tmp_desc %x, id %d\n", (int)cur_desc, fi);
-+
-+ tmp_desc = (GMAC_DESCRIPTOR_T*)((gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC) & 0xfffffff0) + tx_desc_virtual_base[dev_index]);
-+ hw_index = ((unsigned int)tmp_desc - tx_desc_start_adr[dev_index])/ sizeof(GMAC_DESCRIPTOR_T);
-+ printk("hd_desc %x, ind %d, fin desc %x\n",(int)tmp_desc, hw_index, (int)tp->tx_finished_desc);
-+
-+ for (i=0; i<TX_DESC_NUM; i++) {
-+ printk("**id %4d, hw_index %4d ==> ", fi, hw_index);
-+ printk("fc %8x ", tmp_desc->frame_ctrl.bits32);
-+ printk("fs %8x ", tmp_desc->flag_status.bits32);
-+ printk("fb %8x ", tmp_desc->buf_adr);
-+ printk("fd %8x\n", tmp_desc->next_desc.next_descriptor);
-+ tmp_desc = (GMAC_DESCRIPTOR_T*)((tmp_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]);
-+ fi = ((unsigned int)tmp_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+ }
-+ tx_current_descriptor = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CURR_DESC);
-+ printk("%s: tx current descriptor = %x \n",__func__,tx_current_descriptor);
-+ printk("%s: interrupt status = %x \n",__func__,int_status);
-+ return 0;
-+}
-+
-+int cleanup_desc(int dev_index, struct gmac_private* tp)
-+{
-+ int i=0;
-+ int index = ((unsigned int)tp->tx_cur_desc - tx_desc_start_adr[dev_index])/sizeof(GMAC_DESCRIPTOR_T);
-+ GMAC_DESCRIPTOR_T* fill_desc = tp->tx_cur_desc;
-+
-+ for (i=0; i< TX_DESC_NUM; i++)
-+ {
-+ fill_desc->frame_ctrl.bits_tx_out.own = CPU;
-+ fill_desc->frame_ctrl.bits_tx_out.buffer_size = TX_BUF_SIZE;
-+ tx_skb[dev_index][index].desc_in_use = 0;
-+ free_tx_buf(dev_index, index);
-+ printk("cleanup di %d\n", index);
-+ fill_desc = (GMAC_DESCRIPTOR_T*)((fill_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]);
-+ index++;
-+ if (index > TX_DESC_NUM)
-+ index = 0;
-+ }
-+ return 1;
-+}
-+
-+size_t get_available_tx_desc(struct net_device* dev, int dev_index)
-+{
-+ struct gmac_private *tp = dev->priv;
-+ unsigned int desc_hdr = tp->tx_desc_hdr[dev_index];
-+ unsigned int desc_tail = tp->tx_desc_tail[dev_index];
-+ int available_desc_num = (TX_DESC_NUM - desc_hdr + desc_tail) & (TX_DESC_NUM-1);
-+ if (!available_desc_num) {
-+ if (tx_skb[dev_index][desc_hdr].desc_in_use)
-+ return 0;
-+ else
-+ return TX_DESC_NUM;
-+ }
-+ return available_desc_num;
-+}
-+
-+int check_free_tx_desc(int dev_index, int n, GMAC_DESCRIPTOR_T* desc)
-+{
-+ int i,index;
-+ GMAC_DESCRIPTOR_T* tmp_desc = desc;
-+
-+ if (n > TX_DESC_NUM)
-+ return 0;
-+
-+ index = ((unsigned int)tmp_desc - tx_desc_start_adr[dev_index])/sizeof(GMAC_DESCRIPTOR_T);
-+ for (i=0; i<n; i++)
-+ {
-+ if (tx_skb[dev_index][index].desc_in_use)
-+ {
-+ printk("sw desc %d is in use\n", index);
-+ /* cleanup all the descriptors to check if DMA still running */
-+ return 0;
-+ }
-+ index++;
-+ if (index == TX_DESC_NUM)
-+ index = 0;
-+ }
-+ return 1;
-+}
-+
-+#define TCPHDRLEN(tcp_hdr) ((ntohs(*((__u16 *)tcp_hdr + 6)) >> 12) & 0x000F)
-+
-+inline int fill_in_desc(int dev_index, GMAC_DESCRIPTOR_T *desc, char* data, int len, int total_len, int sof, int freeable, int ownership, struct sk_buff* skb)
-+{
-+ int index = ((unsigned int)desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+
-+ if (desc->frame_ctrl.bits_tx_in.own == CPU)
-+ {
-+ tx_skb[dev_index][index].freeable = freeable;
-+ if ((sof & 0x01) && skb) {
-+ tx_skb[dev_index][index].skb = skb;
-+ }
-+ else
-+ tx_skb[dev_index][index].skb = 0;
-+
-+ if (sof != 2)
-+ tx_skb[dev_index][index].desc_in_use = 1;
-+ else
-+ tx_skb[dev_index][index].desc_in_use = 0;
-+
-+ consistent_sync(data, len, PCI_DMA_TODEVICE);
-+ desc->buf_adr = (unsigned int)__pa(data);
-+ desc->frame_ctrl.bits_tx_out.buffer_size = len;
-+ desc->flag_status.bits_tx_flag.frame_count = total_len;
-+ desc->next_desc.bits.eofie = 1;
-+ desc->next_desc.bits.sof_eof = sof;
-+ desc->frame_ctrl.bits_tx_out.vlan_enable = 0;
-+ desc->frame_ctrl.bits_tx_out.ip_csum_en = 1; /* TSS IPv4 IP header checksum enable */
-+ desc->frame_ctrl.bits_tx_out.ipv6_tx_en = 1; /* TSS IPv6 tx enable */
-+ desc->frame_ctrl.bits_tx_out.tcp_csum_en = 1; /* TSS TCP checksum enable */
-+ desc->frame_ctrl.bits_tx_out.udp_csum_en = 1; /* TSS UDP checksum enable */
-+ wmb();
-+ desc->frame_ctrl.bits_tx_out.own = ownership;
-+// consistent_sync(desc, sizeof(GMAC_DESCRIPTOR_T), PCI_DMA_TODEVICE);
-+ }
-+ return 0;
-+}
-+#endif
-+
-+static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+ struct gmac_private *tp = dev->priv;
-+ GMAC_TXDMA_CTRL_T tx_ctrl,tx_ctrl_mask;
-+ GMAC_TXDMA_FIRST_DESC_T txdma_busy;
-+ unsigned int len = skb->len;
-+ unsigned int dev_index;
-+ static unsigned int pcount = 0;
-+#ifdef CONFIG_SL2312_MPAGE
-+ GMAC_DESCRIPTOR_T *fill_desc;
-+ int snd_pages = skb_shinfo(skb)->nr_frags; /* get number of descriptor */
-+ int desc_needed = 1; // for jumbo packet, one descriptor is enough.
-+ int header_len = skb->len;
-+ struct iphdr *ip_hdr;
-+ struct tcphdr *tcp_hdr;
-+ int tcp_hdr_len;
-+ int data_len;
-+ int prv_index;
-+ long seq_num;
-+ int first_desc_index;
-+ int ownership, freeable;
-+ int eof;
-+ int i=0;
-+#endif
-+#ifdef CONFIG_TXINT_DISABLE
-+ int available_desc_cnt = 0;
-+#endif
-+
-+ dev_index = gmac_select_interface(dev);
-+
-+#ifdef CONFIG_TXINT_DISABLE
-+ available_desc_cnt = get_available_tx_desc(dev, dev_index);
-+
-+ if (available_desc_cnt < (TX_DESC_NUM >> 2)) {
-+ gmac_tx_packet_complete(dev);
-+ }
-+#endif
-+
-+#ifdef CONFIG_SL2312_MPAGE
-+
-+ fill_desc = tp->tx_cur_desc;
-+ if(!fill_desc) {
-+ printk("cur_desc is NULL!\n");
-+ return -1;
-+ }
-+
-+ if (storlink_ctl.recvfile==2)
-+ {
-+ printk("snd_pages=%d skb->len=%d\n",snd_pages,skb->len);
-+ }
-+
-+ if (snd_pages)
-+ desc_needed += snd_pages; /* decriptors needed for this large packet */
-+
-+ if (!check_free_tx_desc(dev_index, desc_needed, fill_desc)) {
-+ printk("no available desc!\n");
-+ gmac_dump_register(dev);
-+ printk_all(dev_index, tp);
-+ tp->stats.tx_dropped++;
-+ if (pcount++ > 10)
-+ {
-+ for (;;);
-+ }
-+ return -1;
-+ }
-+
-+ first_desc_index = ((unsigned int)fill_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+
-+ /* check if the tcp packet is in order*/
-+ ip_hdr = (struct iphdr*) &(skb->data[14]);
-+ tcp_hdr = (struct tcphdr*) &(skb->data[14+ip_hdr->ihl * 4]);
-+ tcp_hdr_len = TCPHDRLEN(tcp_hdr) * 4;
-+ data_len = skb->len - 14 - ip_hdr->ihl *4 - tcp_hdr_len;
-+
-+ prv_index = first_desc_index-1;
-+ if (prv_index <0)
-+ prv_index += TX_DESC_NUM;
-+ seq_num = ntohl(tcp_hdr->seq);
-+
-+ if (snd_pages)
-+ {
-+ // calculate header length
-+ // check fragment total length and header len = skb len - frag len
-+ // or parse the header.
-+ for (i=0; i<snd_pages; i++) {
-+ skb_frag_t* frag = &skb_shinfo(skb)->frags[i];
-+ header_len -= frag->size;
-+ }
-+ ownership = CPU;
-+ freeable = 0;
-+ /* fill header into first descriptor */
-+ fill_in_desc(dev_index, fill_desc, skb->data, header_len, len, 2, freeable, ownership, 0);
-+ fill_desc = (GMAC_DESCRIPTOR_T*)((fill_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]);
-+ tx_skb[dev_index][first_desc_index].end_seq = seq_num + data_len;
-+
-+ eof = 0;
-+ ownership = DMA;
-+ for (i=0; i<snd_pages; i++)
-+ {
-+ skb_frag_t* frag = &skb_shinfo(skb)->frags[i];
-+ int start_pos = frag->page_offset;
-+ char* data_buf = page_address(frag->page);
-+ int data_size = frag->size;
-+ int cur_index;
-+
-+ if (i == snd_pages-1)
-+ {
-+ eof=1;
-+ freeable = 1;
-+ }
-+ fill_in_desc(dev_index, fill_desc, data_buf+(start_pos), data_size,
-+ len, eof, freeable, ownership, skb);
-+ cur_index = ((unsigned int)fill_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+
-+ fill_desc = (GMAC_DESCRIPTOR_T*)((fill_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]);
-+ }
-+ /* pass the ownership of the first descriptor to hardware */
-+// disable_irq(gmac_irq[dev_index]);
-+ tx_skb[dev_index][first_desc_index].desc_in_use = 1;
-+ wmb();
-+ tp->tx_cur_desc->frame_ctrl.bits_tx_out.own = DMA;
-+// consistent_sync(tp->tx_cur_desc, sizeof(GMAC_DESCRIPTOR_T), PCI_DMA_TODEVICE);
-+ tp->tx_cur_desc = fill_desc;
-+ dev->trans_start = jiffies;
-+// enable_irq(gmac_irq[dev_index]);
-+ }
-+ else if ( tp->tx_cur_desc->frame_ctrl.bits_tx_out.own == CPU )
-+ {
-+// tx_skb[dev_index][first_desc_index].end_seq = seq_num + data_len;
-+// disable_irq(gmac_irq[dev_index]);
-+ fill_in_desc(dev_index, tp->tx_cur_desc, skb->data, skb->len, skb->len, 3, 1, DMA, skb);
-+// enable_irq(gmac_irq[dev_index]);
-+ //consistent_sync(tp->tx_cur_desc, sizeof(GMAC_DESCRIPTOR_T), PCI_DMA_TODEVICE);
-+ tp->tx_cur_desc = (GMAC_DESCRIPTOR_T*)((tp->tx_cur_desc->next_desc.next_descriptor & 0xfffffff0) + tx_desc_virtual_base[dev_index]);
-+ dev->trans_start = jiffies;
-+ }
-+ else
-+ {
-+ printk("gmac tx drop!\n");
-+ tp->stats.tx_dropped++;
-+ return -1;
-+ }
-+
-+#ifdef CONFIG_TXINT_DISABLE
-+ tp->tx_desc_hdr[dev_index] = (tp->tx_desc_hdr[dev_index] + desc_needed) & (TX_DESC_NUM-1);
-+#endif
-+
-+#else
-+ if ((tp->tx_cur_desc->frame_ctrl.bits_tx_out.own == CPU) && (len < TX_BUF_SIZE))
-+ {
-+ index = ((unsigned int)tp->tx_cur_desc - tx_desc_start_adr[dev_index]) / sizeof(GMAC_DESCRIPTOR_T);
-+ tx_skb[dev_index][index] = skb;
-+ consistent_sync(skb->data,skb->len,PCI_DMA_TODEVICE);
-+ tp->tx_cur_desc->buf_adr = (unsigned int)__pa(skb->data);
-+ tp->tx_cur_desc->flag_status.bits_tx_flag.frame_count = len; /* total frame byte count */
-+ tp->tx_cur_desc->next_desc.bits.sof_eof = 0x03; /*only one descriptor*/
-+ tp->tx_cur_desc->frame_ctrl.bits_tx_out.buffer_size = len; /* descriptor byte count */
-+ tp->tx_cur_desc->frame_ctrl.bits_tx_out.vlan_enable = 0;
-+ tp->tx_cur_desc->frame_ctrl.bits_tx_out.ip_csum_en = 0; /* TSS IPv4 IP header checksum enable */
-+ tp->tx_cur_desc->frame_ctrl.bits_tx_out.ipv6_tx_en = 0 ; /* TSS IPv6 tx enable */
-+ tp->tx_cur_desc->frame_ctrl.bits_tx_out.tcp_csum_en = 0; /* TSS TCP checksum enable */
-+ tp->tx_cur_desc->frame_ctrl.bits_tx_out.udp_csum_en = 0; /* TSS UDP checksum enable */
-+ wmb();
-+ tp->tx_cur_desc->frame_ctrl.bits_tx_out.own = DMA; /* set owner bit */
-+ tp->tx_cur_desc = (GMAC_DESCRIPTOR_T *)((tp->tx_cur_desc->next_desc.next_descriptor & 0xfffffff0)+tx_desc_virtual_base[dev_index]);
-+ dev->trans_start = jiffies;
-+ }
-+ else
-+ {
-+ /* no free tx descriptor */
-+ dev_kfree_skb(skb);
-+ netif_stop_queue(dev);
-+ tp->stats.tx_dropped++;
-+ return (-1);
-+ }
-+#endif
-+ /* if TX DMA process is stoped , restart it */
-+ txdma_busy.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_FIRST_DESC);
-+ if (txdma_busy.bits.td_busy == 0)
-+ {
-+ /* restart DMA process */
-+ tx_ctrl.bits32 = 0;
-+ tx_ctrl.bits.td_start = 1;
-+ tx_ctrl.bits.td_continue = 1;
-+ tx_ctrl_mask.bits32 = 0;
-+ tx_ctrl_mask.bits.td_start = 1;
-+ tx_ctrl_mask.bits.td_continue = 1;
-+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CTRL,tx_ctrl.bits32,tx_ctrl_mask.bits32);
-+ }
-+ return (0);
-+}
-+
-+
-+struct net_device_stats * gmac_get_stats(struct net_device *dev)
-+{
-+ struct gmac_private *tp = dev->priv;
-+ unsigned long flags;
-+ unsigned int pkt_drop;
-+ unsigned int pkt_error;
-+ unsigned int dev_index;
-+
-+ dev_index = gmac_select_interface(dev);
-+
-+// if (storlink_ctl.recvfile==3)
-+// {
-+// printk("GMAC_GLOBAL_BASE_ADDR=%x\n", readl(GMAC_GLOBAL_BASE_ADDR+0x30));
-+// gmac_dump_register(dev);
-+// printk_all(0, dev);
-+// }
-+
-+ if (netif_running(dev))
-+ {
-+ /* read H/W counter */
-+ spin_lock_irqsave(&tp->lock,flags);
-+ pkt_drop = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_IN_DISCARDS);
-+ pkt_error = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_IN_ERRORS);
-+ tp->stats.rx_dropped = tp->stats.rx_dropped + pkt_drop;
-+ tp->stats.rx_errors = tp->stats.rx_errors + pkt_error;
-+ spin_unlock_irqrestore(&tp->lock,flags);
-+ }
-+ return &tp->stats;
-+}
-+
-+static unsigned const ethernet_polynomial = 0x04c11db7U;
-+static inline u32 ether_crc (int length, unsigned char *data)
-+{
-+ int crc = -1;
-+ unsigned int i;
-+ unsigned int crc_val=0;
-+
-+ while (--length >= 0) {
-+ unsigned char current_octet = *data++;
-+ int bit;
-+ for (bit = 0; bit < 8; bit++, current_octet >>= 1)
-+ crc = (crc << 1) ^ ((crc < 0) ^ (current_octet & 1) ?
-+ ethernet_polynomial : 0);
-+ }
-+ crc = ~crc;
-+ for (i=0;i<32;i++)
-+ {
-+ crc_val = crc_val + (((crc << i) & 0x80000000) >> (31-i));
-+ }
-+ return crc_val;
-+}
-+
-+static void gmac_set_rx_mode(struct net_device *dev)
-+{
-+ GMAC_RX_FLTR_T filter;
-+ unsigned int mc_filter[2]; /* Multicast hash filter */
-+ int bit_nr;
-+ unsigned int i, dev_index;
-+
-+ dev_index = gmac_select_interface(dev);
-+
-+// printk("%s : dev->flags = %x \n",__func__,dev->flags);
-+// dev->flags |= IFF_ALLMULTI; /* temp */
-+ filter.bits32 = 0;
-+ filter.bits.error = 0;
-+ if (dev->flags & IFF_PROMISC)
-+ {
-+ filter.bits.error = 1;
-+ filter.bits.promiscuous = 1;
-+ filter.bits.broadcast = 1;
-+ filter.bits.multicast = 1;
-+ filter.bits.unicast = 1;
-+ mc_filter[1] = mc_filter[0] = 0xffffffff;
-+ }
-+ else if (dev->flags & IFF_ALLMULTI)
-+ {
-+ filter.bits.promiscuous = 1;
-+ filter.bits.broadcast = 1;
-+ filter.bits.multicast = 1;
-+ filter.bits.unicast = 1;
-+ mc_filter[1] = mc_filter[0] = 0xffffffff;
-+ }
-+ else
-+ {
-+ struct dev_mc_list *mclist;
-+
-+ filter.bits.promiscuous = 1;
-+ filter.bits.broadcast = 1;
-+ filter.bits.multicast = 1;
-+ filter.bits.unicast = 1;
-+ mc_filter[1] = mc_filter[0] = 0;
-+ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;i++, mclist = mclist->next)
-+ {
-+ bit_nr = ether_crc(ETH_ALEN,mclist->dmi_addr) & 0x0000003f;
-+ if (bit_nr < 32)
-+ {
-+ mc_filter[0] = mc_filter[0] | (1<<bit_nr);
-+ }
-+ else
-+ {
-+ mc_filter[1] = mc_filter[1] | (1<<(bit_nr-32));
-+ }
-+ }
-+ }
-+ filter.bits32 = 0x1f;
-+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_RX_FLTR,filter.bits32,0xffffffff);
-+
-+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_MCAST_FIL0,mc_filter[0],0xffffffff);
-+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_MCAST_FIL1,mc_filter[1],0xffffffff);
-+ return;
-+}
-+
-+static int gmac_set_mac_address(struct net_device *dev, void *addr)
-+{
-+ struct sockaddr *sock;
-+ unsigned int reg_val;
-+ unsigned int dev_index;
-+ unsigned int i;
-+
-+ dev_index = gmac_select_interface(dev);
-+
-+ sock = (struct sockaddr *) addr;
-+ for (i = 0; i < 6; i++)
-+ {
-+ dev->dev_addr[i] = sock->sa_data[i];
-+ }
-+
-+ reg_val = dev->dev_addr[0] + (dev->dev_addr[1]<<8) + (dev->dev_addr[2]<<16) + (dev->dev_addr[3]<<24);
-+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_STA_ADD0,reg_val,0xffffffff);
-+ reg_val = dev->dev_addr[4] + (dev->dev_addr[5]<<8) ;
-+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_STA_ADD1,reg_val,0x0000ffff);
-+ memcpy(&eth0_mac[0],&dev->dev_addr[0],6);
-+ printk("Storlink %s address = ",dev->name);
-+ printk("%02x",dev->dev_addr[0]);
-+ printk("%02x",dev->dev_addr[1]);
-+ printk("%02x",dev->dev_addr[2]);
-+ printk("%02x",dev->dev_addr[3]);
-+ printk("%02x",dev->dev_addr[4]);
-+ printk("%02x\n",dev->dev_addr[5]);
-+
-+ return (0);
-+}
-+
-+static void gmac_tx_timeout(struct net_device *dev)
-+{
-+ GMAC_TXDMA_CTRL_T tx_ctrl,tx_ctrl_mask;
-+ GMAC_TXDMA_FIRST_DESC_T txdma_busy;
-+ int dev_index;
-+
-+ dev_index = gmac_select_interface(dev);
-+
-+ /* if TX DMA process is stoped , restart it */
-+ txdma_busy.bits32 = gmac_read_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_FIRST_DESC);
-+ if (txdma_busy.bits.td_busy == 0)
-+ {
-+ /* restart DMA process */
-+ tx_ctrl.bits32 = 0;
-+ tx_ctrl.bits.td_start = 1;
-+ tx_ctrl.bits.td_continue = 1;
-+ tx_ctrl_mask.bits32 = 0;
-+ tx_ctrl_mask.bits.td_start = 1;
-+ tx_ctrl_mask.bits.td_continue = 1;
-+ gmac_write_reg(gmac_base_addr[dev_index] + GMAC_TXDMA_CTRL,tx_ctrl.bits32,tx_ctrl_mask.bits32);
-+ }
-+ netif_wake_queue(dev);
-+ return;
-+}
-+
-+static int gmac_netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-+{
-+ int rc = 0;
-+ unsigned char *hwa = rq->ifr_ifru.ifru_hwaddr.sa_data;
-+
-+ if (!netif_running(dev))
-+ {
-+ printk("Before changing the H/W address,please down the device.\n");
-+ return -EINVAL;
-+ }
-+
-+ switch (cmd) {
-+ case SIOCETHTOOL:
-+ break;
-+
-+ case SIOCSIFHWADDR:
-+ gmac_set_mac_address(dev,hwa);
-+ break;
-+
-+ case SIOCGMIIPHY: /* Get the address of the PHY in use. */
-+ case SIOCDEVPRIVATE: /* binary compat, remove in 2.5 */
-+ break;
-+
-+ case SIOCGMIIREG: /* Read the specified MII register. */
-+ case SIOCDEVPRIVATE+1:
-+ break;
-+
-+ case SIOCSMIIREG: /* Write the specified MII register */
-+ case SIOCDEVPRIVATE+2:
-+ break;
-+
-+ default:
-+ rc = -EOPNOTSUPP;
-+ break;
-+ }
-+
-+ return rc;
-+}
-+
-+static void gmac_cleanup_module(void)
-+{
-+ int i;
-+
-+ for (i=0;i<GMAC_PHY_IF;i++)
-+ {
-+ unregister_netdev(gmac_dev[i]);
-+ }
-+ return ;
-+}
-+
-+static int __init gmac_init_module(void)
-+{
-+ struct gmac_private *tp;
-+ struct net_device *dev[GMAC_PHY_IF];
-+ unsigned int i;
-+
-+#ifdef MODULE
-+ printk (KERN_INFO RTL8139_DRIVER_NAME "\n");
-+#endif
-+// init_waitqueue_entry(&wait, current);
-+
-+ printk("GMAC Init......\n");
-+ for(i = 0; i<GMAC_PHY_IF; i++)
-+ {
-+ dev[i] = alloc_etherdev(sizeof(struct gmac_private));
-+ if (dev[i] == NULL)
-+ {
-+ printk (KERN_ERR "Can't allocate ethernet device #%d .\n",i);
-+ return -ENOMEM;
-+ }
-+ gmac_dev[i] = dev[i];
-+
-+ SET_MODULE_OWNER(dev[i]);
-+
-+ tp = dev[i]->priv;
-+
-+ dev[i]->base_addr = gmac_base_addr[i];
-+ dev[i]->irq = gmac_irq[i];
-+ dev[i]->open = gmac_open;
-+ dev[i]->stop = gmac_close;
-+ dev[i]->hard_start_xmit = gmac_start_xmit;
-+ dev[i]->get_stats = gmac_get_stats;
-+ dev[i]->set_multicast_list = gmac_set_rx_mode;
-+ dev[i]->set_mac_address = gmac_set_mac_address;
-+ dev[i]->do_ioctl = gmac_netdev_ioctl;
-+ dev[i]->tx_timeout = gmac_tx_timeout;
-+ dev[i]->watchdog_timeo = TX_TIMEOUT;
-+ dev[i]->features |= NETIF_F_SG|NETIF_F_HW_CSUM|NETIF_F_TSO;
-+#ifdef CONFIG_SL_NAPI
-+ printk("NAPI driver is enabled.\n");
-+ if (i==0)
-+ {
-+ dev[i]->poll = gmac_rx_poll_ga;
-+ dev[i]->weight = 64;
-+ }
-+ else
-+ {
-+ dev[i]->poll = gmac_rx_poll_gb;
-+ dev[i]->weight = 64;
-+ }
-+#endif
-+
-+ if (register_netdev(dev[i]))
-+ {
-+ gmac_cleanup_module();
-+ return(-1);
-+ }
-+ }
-+
-+#ifdef CONFIG_SL3516_ASIC
-+{
-+ unsigned int val;
-+
-+ /* set GMAC global register */
-+ val = readl(GMAC_GLOBAL_BASE_ADDR+0x10);
-+ val = val | 0x005a0000;
-+ writel(val,GMAC_GLOBAL_BASE_ADDR+0x10);
-+ writel(0x07f007f0,GMAC_GLOBAL_BASE_ADDR+0x1c);
-+ writel(0x77770000,GMAC_GLOBAL_BASE_ADDR+0x20);
-+ writel(0x77770000,GMAC_GLOBAL_BASE_ADDR+0x24);
-+ val = readl(GMAC_GLOBAL_BASE_ADDR+0x04);
-+ if((val&(1<<20))==0){ // GMAC1 enable
-+ val = readl(GMAC_GLOBAL_BASE_ADDR+0x30);
-+ val = (val & 0xe7ffffff) | 0x08000000;
-+ writel(val,GMAC_GLOBAL_BASE_ADDR+0x30);
-+ }
-+
-+}
-+#endif
-+
-+// printk("%s: dev0=%x dev1=%x \n",__func__,dev[0],dev[1]);
-+// FLAG_SWITCH = 0 ;
-+// FLAG_SWITCH = SPI_get_identifier();
-+// if(FLAG_SWITCH)
-+// {
-+// printk("Configure ADM699X...\n");
-+// SPI_default(); //Add by jason for ADM699X configuration
-+// }
-+ return (0);
-+}
-+
-+
-+module_init(gmac_init_module);
-+module_exit(gmac_cleanup_module);
-+
-+static int gmac_phy_thread (void *data)
-+{
-+ struct net_device *dev = data;
-+ struct gmac_private *tp = dev->priv;
-+ unsigned long timeout;
-+
-+ daemonize("%s", dev->name);
-+ allow_signal(SIGTERM);
-+// reparent_to_init();
-+// spin_lock_irq(&current->sigmask_lock);
-+// sigemptyset(&current->blocked);
-+// recalc_sigpending(current);
-+// spin_unlock_irq(&current->sigmask_lock);
-+// strncpy (current->comm, dev->name, sizeof(current->comm) - 1);
-+// current->comm[sizeof(current->comm) - 1] = '\0';
-+
-+ while (1)
-+ {
-+ timeout = next_tick;
-+ do
-+ {
-+ timeout = interruptible_sleep_on_timeout (&tp->thr_wait, timeout);
-+ } while (!signal_pending (current) && (timeout > 0));
-+
-+ if (signal_pending (current))
-+ {
-+// spin_lock_irq(&current->sigmask_lock);
-+ flush_signals(current);
-+// spin_unlock_irq(&current->sigmask_lock);
-+ }
-+
-+ if (tp->time_to_die)
-+ break;
-+
-+// printk("%s : Polling PHY Status...%x\n",__func__,dev);
-+ rtnl_lock ();
-+ gmac_get_phy_status(dev);
-+ rtnl_unlock ();
-+ }
-+ complete_and_exit (&tp->thr_exited, 0);
-+}
-+
-+static void gmac_set_phy_status(struct net_device *dev)
-+{
-+ GMAC_STATUS_T status;
-+ unsigned int reg_val;
-+ unsigned int i = 0;
-+ unsigned int index;
-+
-+ if (FLAG_SWITCH==1)
-+ {
-+ return; /* GMAC connects to a switch chip, not PHY */
-+ }
-+
-+ index = gmac_get_dev_index(dev);
-+
-+ if (index == 0)
-+ {
-+// mii_write(phy_addr[index],0x04,0x0461); /* advertisement 10M full duplex, pause capable on */
-+// mii_write(phy_addr[index],0x04,0x0421); /* advertisement 10M half duplex, pause capable on */
-+ mii_write(phy_addr[index],0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
-+// mii_write(phy_addr[index],0x04,0x04a1); /* advertisement 100M half duplex, pause capable on */
-+#ifdef CONFIG_SL3516_ASIC
-+ mii_write(phy_addr[index],0x09,0x0300); /* advertisement 1000M full duplex, pause capable on */
-+// mii_write(phy_addr[index],0x09,0x0000); /* advertisement 1000M full duplex, pause capable on */
-+#endif
-+ }
-+ else
-+ {
-+// mii_write(phy_addr[index],0x04,0x0461); /* advertisement 10M full duplex, pause capable on */
-+// mii_write(phy_addr[index],0x04,0x0421); /* advertisement 10M half duplex, pause capable on */
-+ mii_write(phy_addr[index],0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
-+// mii_write(phy_addr[index],0x04,0x04a1); /* advertisement 100M half duplex, pause capable on */
-+#ifdef CONFIG_SL3516_ASIC
-+// mii_write(phy_addr[index],0x09,0x0000); /* advertisement no 1000M */
-+ mii_write(phy_addr[index],0x09,0x0300); /* advertisement 1000M full duplex, pause capable on */
-+#endif
-+ }
-+
-+ mii_write(phy_addr[index],0x00,0x1200); /* Enable and Restart Auto-Negotiation */
-+ mii_write(phy_addr[index],0x18,0x0041); /* Enable Active led */
-+ while (((reg_val=mii_read(phy_addr[index],0x01)) & 0x00000004)!=0x04)
-+ {
-+ i++;
-+ if (i > 30)
-+ {
-+ break;
-+ }
-+ msleep(100);
-+ }
-+ if (i>30)
-+ {
-+ pre_phy_status[index] = LINK_DOWN;
-+ clear_bit(__LINK_STATE_START, &dev->state);
-+ netif_stop_queue(dev);
-+ storlink_ctl.link = 0;
-+ printk("Link Down (%04x) ",reg_val);
-+ }
-+ else
-+ {
-+ pre_phy_status[index] = LINK_UP;
-+ set_bit(__LINK_STATE_START, &dev->state);
-+ netif_wake_queue(dev);
-+ storlink_ctl.link = 1;
-+ printk("Link Up (%04x) ",reg_val);
-+ }
-+
-+ status.bits32 = 0;
-+ reg_val = mii_read(phy_addr[index],10);
-+ printk("reg_val0 = %x \n",reg_val);
-+ if ((reg_val & 0x0800) == 0x0800)
-+ {
-+ status.bits.duplex = 1;
-+ status.bits.speed = 2;
-+ printk(" 1000M/Full \n");
-+ }
-+ else if ((reg_val & 0x0400) == 0x0400)
-+ {
-+ status.bits.duplex = 0;
-+ status.bits.speed = 2;
-+ printk(" 1000M/Half \n");
-+ }
-+ else
-+ {
-+ reg_val = (mii_read(phy_addr[index],0x05) & 0x05E0) >> 5;
-+ printk("reg_val1 = %x \n",reg_val);
-+ if ((reg_val & 0x08)==0x08) /* 100M full duplex */
-+ {
-+ status.bits.duplex = 1;
-+ status.bits.speed = 1;
-+ printk(" 100M/Full \n");
-+ }
-+ else if ((reg_val & 0x04)==0x04) /* 100M half duplex */
-+ {
-+ status.bits.duplex = 0;
-+ status.bits.speed = 1;
-+ printk(" 100M/Half \n");
-+ }
-+ else if ((reg_val & 0x02)==0x02) /* 10M full duplex */
-+ {
-+ status.bits.duplex = 1;
-+ status.bits.speed = 0;
-+ printk(" 10M/Full \n");
-+ }
-+ else if ((reg_val & 0x01)==0x01) /* 10M half duplex */
-+ {
-+ status.bits.duplex = 0;
-+ status.bits.speed = 0;
-+ printk(" 100M/Half \n");
-+ }
-+ }
-+
-+ reg_val = (mii_read(phy_addr[index],0x05) & 0x05E0) >> 5;
-+ if ((reg_val & 0x20)==0x20)
-+ {
-+ flow_control_enable[index] = 1;
-+ printk("Flow Control Enable. \n");
-+ }
-+ else
-+ {
-+ flow_control_enable[index] = 0;
-+ printk("Flow Control Disable. \n");
-+ }
-+ full_duplex = status.bits.duplex;
-+ speed = status.bits.speed;
-+}
-+
-+static void gmac_get_phy_status(struct net_device *dev)
-+{
-+ GMAC_CONFIG0_T config0,config0_mask;
-+ GMAC_STATUS_T status;
-+ unsigned int reg_val;
-+ unsigned int index;
-+
-+ index = gmac_select_interface(dev);
-+
-+ status.bits32 = 0;
-+ status.bits.phy_mode = 1;
-+
-+#ifdef CONFIG_SL3516_ASIC
-+ status.bits.mii_rmii = 2; /* default value for ASIC version */
-+// status.bits.speed = 1;
-+#else
-+ if (index==0)
-+ status.bits.mii_rmii = 0;
-+ else
-+ status.bits.mii_rmii = 2;
-+#endif
-+
-+ /* read PHY status register */
-+ reg_val = mii_read(phy_addr[index],0x01);
-+ if ((reg_val & 0x0024) == 0x0024) /* link is established and auto_negotiate process completed */
-+ {
-+ /* read PHY Auto-Negotiation Link Partner Ability Register */
-+ reg_val = mii_read(phy_addr[index],10);
-+ if ((reg_val & 0x0800) == 0x0800)
-+ {
-+ status.bits.mii_rmii = 3; /* RGMII 1000Mbps mode */
-+ status.bits.duplex = 1;
-+ status.bits.speed = 2;
-+ }
-+ else if ((reg_val & 0x0400) == 0x0400)
-+ {
-+ status.bits.mii_rmii = 3; /* RGMII 1000Mbps mode */
-+ status.bits.duplex = 0;
-+ status.bits.speed = 2;
-+ }
-+ else
-+ {
-+ reg_val = (mii_read(phy_addr[index],0x05) & 0x05E0) >> 5;
-+ if ((reg_val & 0x08)==0x08) /* 100M full duplex */
-+ {
-+ status.bits.mii_rmii = 2; /* RGMII 10/100Mbps mode */
-+ status.bits.duplex = 1;
-+ status.bits.speed = 1;
-+ }
-+ else if ((reg_val & 0x04)==0x04) /* 100M half duplex */
-+ {
-+ status.bits.mii_rmii = 2; /* RGMII 10/100Mbps mode */
-+ status.bits.duplex = 0;
-+ status.bits.speed = 1;
-+ }
-+ else if ((reg_val & 0x02)==0x02) /* 10M full duplex */
-+ {
-+ status.bits.mii_rmii = 2; /* RGMII 10/100Mbps mode */
-+ status.bits.duplex = 1;
-+ status.bits.speed = 0;
-+ }
-+ else if ((reg_val & 0x01)==0x01) /* 10M half duplex */
-+ {
-+ status.bits.mii_rmii = 2; /* RGMII 10/100Mbps mode */
-+ status.bits.duplex = 0;
-+ status.bits.speed = 0;
-+ }
-+ }
-+ status.bits.link = LINK_UP; /* link up */
-+ netif_wake_queue(dev);
-+
-+ reg_val = (mii_read(phy_addr[index],0x05) & 0x05E0) >> 5;
-+ if ((reg_val & 0x20)==0x20)
-+ {
-+ if (flow_control_enable[index] == 0)
-+ {
-+ config0.bits32 = 0;
-+ config0_mask.bits32 = 0;
-+ config0.bits.tx_fc_en = 1; /* enable tx flow control */
-+ config0.bits.rx_fc_en = 1; /* enable rx flow control */
-+ config0_mask.bits.tx_fc_en = 1;
-+ config0_mask.bits.rx_fc_en = 1;
-+ gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
-+// printk("eth%d Flow Control Enable. \n",index);
-+ }
-+ flow_control_enable[index] = 1;
-+ }
-+ else
-+ {
-+ if (flow_control_enable[index] == 1)
-+ {
-+ config0.bits32 = 0;
-+ config0_mask.bits32 = 0;
-+ config0.bits.tx_fc_en = 0; /* disable tx flow control */
-+ config0.bits.rx_fc_en = 0; /* disable rx flow control */
-+ config0_mask.bits.tx_fc_en = 1;
-+ config0_mask.bits.rx_fc_en = 1;
-+ gmac_write_reg(gmac_base_addr[index] + GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
-+// printk("eth%d Flow Control Disable. \n",index);
-+ }
-+ flow_control_enable[index] = 0;
-+ }
-+
-+ if (pre_phy_status[index] == LINK_DOWN)
-+ {
-+ gmac_enable_tx_rx(dev);
-+ pre_phy_status[index] = LINK_UP;
-+ set_bit(__LINK_STATE_START, &dev->state);
-+ storlink_ctl.link = 1;
-+// printk("eth%d Link Up ...\n",index);
-+ }
-+ }
-+ else
-+ {
-+ status.bits.link = LINK_DOWN; /* link down */
-+ netif_stop_queue(dev);
-+ flow_control_enable[index] = 0;
-+ storlink_ctl.link = 0;
-+ if (pre_phy_status[index] == LINK_UP)
-+ {
-+ gmac_disable_tx_rx(dev);
-+ pre_phy_status[index] = LINK_DOWN;
-+ clear_bit(__LINK_STATE_START, &dev->state);
-+// printk("eth%d Link Down ...\n",index);
-+ }
-+
-+ }
-+
-+ reg_val = gmac_read_reg(gmac_base_addr[index] + GMAC_STATUS);
-+ if (reg_val != status.bits32)
-+ {
-+ gmac_write_reg(gmac_base_addr[index] + GMAC_STATUS,status.bits32,0x0000007f);
-+ }
-+}
-+
-+/***************************************/
-+/* define GPIO module base address */
-+/***************************************/
-+#define GPIO_BASE_ADDR (IO_ADDRESS(SL2312_GPIO_BASE))
-+
-+/* define GPIO pin for MDC/MDIO */
-+
-+// for gemini ASIC
-+#ifdef CONFIG_SL3516_ASIC
-+#define H_MDC_PIN 22
-+#define H_MDIO_PIN 21
-+#define G_MDC_PIN 22
-+#define G_MDIO_PIN 21
-+#else
-+#define H_MDC_PIN 3
-+#define H_MDIO_PIN 2
-+#define G_MDC_PIN 0
-+#define G_MDIO_PIN 1
-+#endif
-+
-+//#define GPIO_MDC 0x80000000
-+//#define GPIO_MDIO 0x00400000
-+
-+static unsigned int GPIO_MDC = 0;
-+static unsigned int GPIO_MDIO = 0;
-+static unsigned int GPIO_MDC_PIN = 0;
-+static unsigned int GPIO_MDIO_PIN = 0;
-+
-+// For PHY test definition!!
-+#define LPC_EECK 0x02
-+#define LPC_EDIO 0x04
-+#define LPC_GPIO_SET 3
-+#define LPC_BASE_ADDR IO_ADDRESS(IT8712_IO_BASE)
-+#define inb_gpio(x) inb(LPC_BASE_ADDR + IT8712_GPIO_BASE + x)
-+#define outb_gpio(x, y) outb(y, LPC_BASE_ADDR + IT8712_GPIO_BASE + x)
-+
-+enum GPIO_REG
-+{
-+ GPIO_DATA_OUT = 0x00,
-+ GPIO_DATA_IN = 0x04,
-+ GPIO_PIN_DIR = 0x08,
-+ GPIO_BY_PASS = 0x0c,
-+ GPIO_DATA_SET = 0x10,
-+ GPIO_DATA_CLEAR = 0x14,
-+};
-+/***********************/
-+/* MDC : GPIO[31] */
-+/* MDIO: GPIO[22] */
-+/***********************/
-+
-+/***************************************************
-+* All the commands should have the frame structure:
-+*<PRE><ST><OP><PHYAD><REGAD><TA><DATA><IDLE>
-+****************************************************/
-+
-+/*****************************************************************
-+* Inject a bit to NWay register through CSR9_MDC,MDIO
-+*******************************************************************/
-+void mii_serial_write(char bit_MDO) // write data into mii PHY
-+{
-+#if 0 //def CONFIG_SL2312_LPC_IT8712
-+ unsigned char iomode,status;
-+
-+ iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
-+ iomode |= (LPC_EECK|LPC_EDIO) ; // Set EECK,EDIO,EECS output
-+ LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
-+
-+ if(bit_MDO)
-+ {
-+ status = inb_gpio( LPC_GPIO_SET);
-+ status |= LPC_EDIO ; //EDIO high
-+ outb_gpio(LPC_GPIO_SET, status);
-+ }
-+ else
-+ {
-+ status = inb_gpio( LPC_GPIO_SET);
-+ status &= ~(LPC_EDIO) ; //EDIO low
-+ outb_gpio(LPC_GPIO_SET, status);
-+ }
-+
-+ status |= LPC_EECK ; //EECK high
-+ outb_gpio(LPC_GPIO_SET, status);
-+
-+ status &= ~(LPC_EECK) ; //EECK low
-+ outb_gpio(LPC_GPIO_SET, status);
-+
-+#else
-+ unsigned int addr;
-+ unsigned int value;
-+
-+ addr = GPIO_BASE_ADDR + GPIO_PIN_DIR;
-+ value = readl(addr) | GPIO_MDC | GPIO_MDIO; /* set MDC/MDIO Pin to output */
-+ writel(value,addr);
-+ if(bit_MDO)
-+ {
-+ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+ writel(GPIO_MDIO,addr); /* set MDIO to 1 */
-+ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+ writel(GPIO_MDC,addr); /* set MDC to 1 */
-+ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+ writel(GPIO_MDC,addr); /* set MDC to 0 */
-+ }
-+ else
-+ {
-+ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+ writel(GPIO_MDIO,addr); /* set MDIO to 0 */
-+ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+ writel(GPIO_MDC,addr); /* set MDC to 1 */
-+ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+ writel(GPIO_MDC,addr); /* set MDC to 0 */
-+ }
-+
-+#endif
-+}
-+
-+/**********************************************************************
-+* read a bit from NWay register through CSR9_MDC,MDIO
-+***********************************************************************/
-+unsigned int mii_serial_read(void) // read data from mii PHY
-+{
-+#if 0 //def CONFIG_SL2312_LPC_IT8712
-+ unsigned char iomode,status;
-+ unsigned int value ;
-+
-+ iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
-+ iomode &= ~(LPC_EDIO) ; // Set EDIO input
-+ iomode |= (LPC_EECK) ; // Set EECK,EECS output
-+ LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
-+
-+ status = inb_gpio( LPC_GPIO_SET);
-+ status |= LPC_EECK ; //EECK high
-+ outb_gpio(LPC_GPIO_SET, status);
-+
-+ status &= ~(LPC_EECK) ; //EECK low
-+ outb_gpio(LPC_GPIO_SET, status);
-+
-+ value = inb_gpio( LPC_GPIO_SET);
-+
-+ value = value>>2 ;
-+ value &= 0x01;
-+
-+ return value ;
-+
-+#else
-+ unsigned int *addr;
-+ unsigned int value;
-+
-+ addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_PIN_DIR);
-+ value = readl(addr) & ~GPIO_MDIO; //0xffbfffff; /* set MDC to output and MDIO to input */
-+ writel(value,addr);
-+
-+ addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_SET);
-+ writel(GPIO_MDC,addr); /* set MDC to 1 */
-+ addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+ writel(GPIO_MDC,addr); /* set MDC to 0 */
-+
-+ addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_IN);
-+ value = readl(addr);
-+ value = (value & (1<<GPIO_MDIO_PIN)) >> GPIO_MDIO_PIN;
-+ return(value);
-+
-+#endif
-+}
-+
-+/***************************************
-+* preamble + ST
-+***************************************/
-+void mii_pre_st(void)
-+{
-+ unsigned char i;
-+
-+ for(i=0;i<32;i++) // PREAMBLE
-+ mii_serial_write(1);
-+ mii_serial_write(0); // ST
-+ mii_serial_write(1);
-+}
-+
-+
-+/******************************************
-+* Read MII register
-+* phyad -> physical address
-+* regad -> register address
-+***************************************** */
-+unsigned int mii_read(unsigned char phyad,unsigned char regad)
-+{
-+ unsigned int i,value;
-+ unsigned int bit;
-+
-+ if (phyad == GPHY_ADDR)
-+ {
-+ GPIO_MDC_PIN = G_MDC_PIN; /* assigned MDC pin for giga PHY */
-+ GPIO_MDIO_PIN = G_MDIO_PIN; /* assigned MDIO pin for giga PHY */
-+ }
-+ else
-+ {
-+ GPIO_MDC_PIN = H_MDC_PIN; /* assigned MDC pin for 10/100 PHY */
-+ GPIO_MDIO_PIN = H_MDIO_PIN; /* assigned MDIO pin for 10/100 PHY */
-+ }
-+ GPIO_MDC = (1<<GPIO_MDC_PIN);
-+ GPIO_MDIO = (1<<GPIO_MDIO_PIN);
-+
-+ mii_pre_st(); // PRE+ST
-+ mii_serial_write(1); // OP
-+ mii_serial_write(0);
-+
-+ for (i=0;i<5;i++) { // PHYAD
-+ bit= ((phyad>>(4-i)) & 0x01) ? 1 :0 ;
-+ mii_serial_write(bit);
-+ }
-+
-+ for (i=0;i<5;i++) { // REGAD
-+ bit= ((regad>>(4-i)) & 0x01) ? 1 :0 ;
-+ mii_serial_write(bit);
-+ }
-+
-+ mii_serial_read(); // TA_Z
-+// if((bit=mii_serial_read()) !=0 ) // TA_0
-+// {
-+// return(0);
-+// }
-+ value=0;
-+ for (i=0;i<16;i++) { // READ DATA
-+ bit=mii_serial_read();
-+ value += (bit<<(15-i)) ;
-+ }
-+
-+ mii_serial_write(0); // dumy clock
-+ mii_serial_write(0); // dumy clock
-+//printk("%s: phy_addr=%x reg_addr=%x value=%x \n",__func__,phyad,regad,value);
-+ return(value);
-+}
-+
-+/******************************************
-+* Write MII register
-+* phyad -> physical address
-+* regad -> register address
-+* value -> value to be write
-+***************************************** */
-+void mii_write(unsigned char phyad,unsigned char regad,unsigned int value)
-+{
-+ unsigned int i;
-+ char bit;
-+
-+printk("%s: phy_addr=%x reg_addr=%x value=%x \n",__func__,phyad,regad,value);
-+ if (phyad == GPHY_ADDR)
-+ {
-+ GPIO_MDC_PIN = G_MDC_PIN; /* assigned MDC pin for giga PHY */
-+ GPIO_MDIO_PIN = G_MDIO_PIN; /* assigned MDIO pin for giga PHY */
-+ }
-+ else
-+ {
-+ GPIO_MDC_PIN = H_MDC_PIN; /* assigned MDC pin for 10/100 PHY */
-+ GPIO_MDIO_PIN = H_MDIO_PIN; /* assigned MDIO pin for 10/100 PHY */
-+ }
-+ GPIO_MDC = (1<<GPIO_MDC_PIN);
-+ GPIO_MDIO = (1<<GPIO_MDIO_PIN);
-+
-+ mii_pre_st(); // PRE+ST
-+ mii_serial_write(0); // OP
-+ mii_serial_write(1);
-+ for (i=0;i<5;i++) { // PHYAD
-+ bit= ((phyad>>(4-i)) & 0x01) ? 1 :0 ;
-+ mii_serial_write(bit);
-+ }
-+
-+ for (i=0;i<5;i++) { // REGAD
-+ bit= ((regad>>(4-i)) & 0x01) ? 1 :0 ;
-+ mii_serial_write(bit);
-+ }
-+ mii_serial_write(1); // TA_1
-+ mii_serial_write(0); // TA_0
-+
-+ for (i=0;i<16;i++) { // OUT DATA
-+ bit= ((value>>(15-i)) & 0x01) ? 1 : 0 ;
-+ mii_serial_write(bit);
-+ }
-+ mii_serial_write(0); // dumy clock
-+ mii_serial_write(0); // dumy clock
-+}
-+
-+
-+
-+
-+
-+
-+
-+
-+
-+/* NOTES
-+ * The instruction set of the 93C66/56/46/26/06 chips are as follows:
-+ *
-+ * Start OP *
-+ * Function Bit Code Address** Data Description
-+ * -------------------------------------------------------------------
-+ * READ 1 10 A7 - A0 Reads data stored in memory,
-+ * starting at specified address
-+ * EWEN 1 00 11XXXXXX Write enable must precede
-+ * all programming modes
-+ * ERASE 1 11 A7 - A0 Erase register A7A6A5A4A3A2A1A0
-+ * WRITE 1 01 A7 - A0 D15 - D0 Writes register
-+ * ERAL 1 00 10XXXXXX Erase all registers
-+ * WRAL 1 00 01XXXXXX D15 - D0 Writes to all registers
-+ * EWDS 1 00 00XXXXXX Disables all programming
-+ * instructions
-+ * *Note: A value of X for address is a don't care condition.
-+ * **Note: There are 8 address bits for the 93C56/66 chips unlike
-+ * the 93C46/26/06 chips which have 6 address bits.
-+ *
-+ * The 93Cx6 has a four wire interface: clock, chip select, data in, and
-+ * data out.While the ADM6996 uning three interface: clock, chip select,and data line.
-+ * The input and output are the same pin. ADM6996 can only recognize the write cmd.
-+ * In order to perform above functions, you need
-+ * 1. to enable the chip select .
-+ * 2. send one clock of dummy clock
-+ * 3. send start bit and opcode
-+ * 4. send 8 bits address and 16 bits data
-+ * 5. to disable the chip select.
-+ * Jason Lee 2003/07/30
-+ */
-+
-+/***************************************/
-+/* define GPIO module base address */
-+/***************************************/
-+#define GPIO_EECS 0x00400000 /* EECS: GPIO[22] */
-+//#define GPIO_MOSI 0x20000000 /* EEDO: GPIO[29] send to 6996*/
-+#define GPIO_MISO 0x40000000 /* EEDI: GPIO[30] receive from 6996*/
-+#define GPIO_EECK 0x80000000 /* EECK: GPIO[31] */
-+
-+#define ADM_EECS 0x01
-+#define ADM_EECK 0x02
-+#define ADM_EDIO 0x04
-+/*************************************************************
-+* SPI protocol for ADM6996 control
-+**************************************************************/
-+#define SPI_OP_LEN 0x03 // the length of start bit and opcode
-+#define SPI_OPWRITE 0X05 // write
-+#define SPI_OPREAD 0X06 // read
-+#define SPI_OPERASE 0X07 // erase
-+#define SPI_OPWTEN 0X04 // write enable
-+#define SPI_OPWTDIS 0X04 // write disable
-+#define SPI_OPERSALL 0X04 // erase all
-+#define SPI_OPWTALL 0X04 // write all
-+
-+#define SPI_ADD_LEN 8 // bits of Address
-+#define SPI_DAT_LEN 16 // bits of Data
-+#define ADM6996_PORT_NO 6 // the port number of ADM6996
-+#define ADM6999_PORT_NO 9 // the port number of ADM6999
-+#ifdef CONFIG_ADM_6996
-+ #define ADM699X_PORT_NO ADM6996_PORT_NO
-+#endif
-+#ifdef CONFIG_ADM_6999
-+ #define ADM699X_PORT_NO ADM6999_PORT_NO
-+#endif
-+#define LPC_GPIO_SET 3
-+#define LPC_BASE_ADDR IO_ADDRESS(IT8712_IO_BASE)
-+
-+extern int it8712_exist;
-+
-+#define inb_gpio(x) inb(LPC_BASE_ADDR + IT8712_GPIO_BASE + x)
-+#define outb_gpio(x, y) outb(y, LPC_BASE_ADDR + IT8712_GPIO_BASE + x)
-+
-+/****************************************/
-+/* Function Declare */
-+/****************************************/
-+/*
-+void SPI_write(unsigned char addr,unsigned int value);
-+unsigned int SPI_read(unsigned char table,unsigned char addr);
-+void SPI_write_bit(char bit_EEDO);
-+unsigned int SPI_read_bit(void);
-+void SPI_default(void);
-+void SPI_reset(unsigned char rstype,unsigned char port_cnt);
-+void SPI_pre_st(void);
-+void SPI_CS_enable(unsigned char enable);
-+void SPI_Set_VLAN(unsigned char LAN,unsigned int port_mask);
-+void SPI_Set_tag(unsigned int port,unsigned tag);
-+void SPI_Set_PVID(unsigned int PVID,unsigned int port_mask);
-+void SPI_mac_lock(unsigned int port, unsigned char lock);
-+void SPI_get_port_state(unsigned int port);
-+void SPI_port_enable(unsigned int port,unsigned char enable);
-+
-+void SPI_get_status(unsigned int port);
-+*/
-+
-+struct PORT_CONFIG
-+{
-+ unsigned char auto_negotiation; // 0:Disable 1:Enable
-+ unsigned char speed; // 0:10M 1:100M
-+ unsigned char duplex; // 0:Half 1:Full duplex
-+ unsigned char Tag; // 0:Untag 1:Tag
-+ unsigned char port_disable; // 0:port enable 1:disable
-+ unsigned char pvid; // port VLAN ID 0001
-+ unsigned char mdix; // Crossover judgement. 0:Disable 1:Enable
-+ unsigned char mac_lock; // MAC address Lock 0:Disable 1:Enable
-+};
-+
-+struct PORT_STATUS
-+{
-+ unsigned char link; // 0:not link 1:link established
-+ unsigned char speed; // 0:10M 1:100M
-+ unsigned char duplex; // 0:Half 1:Full duplex
-+ unsigned char flow_ctl; // 0:flow control disable 1:enable
-+ unsigned char mac_lock; // MAC address Lock 0:Disable 1:Enable
-+ unsigned char port_disable; // 0:port enable 1:disable
-+
-+ // Serial Management
-+ unsigned long rx_pac_count; //receive packet count
-+ unsigned long rx_pac_byte; //receive packet byte count
-+ unsigned long tx_pac_count; //transmit packet count
-+ unsigned long tx_pac_byte; //transmit packet byte count
-+ unsigned long collision_count; //error count
-+ unsigned long error_count ;
-+
-+ unsigned long rx_pac_count_overflow; //overflow flag
-+ unsigned long rx_pac_byte_overflow;
-+ unsigned long tx_pac_count_overflow;
-+ unsigned long tx_pac_byte_overflow;
-+ unsigned long collision_count_overflow;
-+ unsigned long error_count_overflow;
-+};
-+
-+struct PORT_CONFIG port_config[ADM699X_PORT_NO]; // 0~3:LAN , 4:WAN , 5:MII
-+static struct PORT_STATUS port_state[ADM699X_PORT_NO];
-+
-+/******************************************
-+* SPI_write
-+* addr -> Write Address
-+* value -> value to be write
-+***************************************** */
-+void SPI_write(unsigned char addr,unsigned int value)
-+{
-+ int i;
-+ char bit;
-+#ifdef CONFIG_IT8712_GPIO
-+ char status;
-+#else
-+ int ad1;
-+#endif
-+
-+#ifdef CONFIG_IT8712_GPIO
-+ status = inb_gpio(LPC_GPIO_SET);
-+ status &= ~(ADM_EDIO) ; //EDIO low
-+ outb_gpio(LPC_GPIO_SET, status);
-+#else
-+ ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+ writel(GPIO_MISO,ad1); /* set MISO to 0 */
-+#endif
-+ SPI_CS_enable(1);
-+
-+ SPI_write_bit(0); //dummy clock
-+
-+ //send write command (0x05)
-+ for(i=SPI_OP_LEN-1;i>=0;i--)
-+ {
-+ bit = (SPI_OPWRITE>>i)& 0x01;
-+ SPI_write_bit(bit);
-+ }
-+ // send 8 bits address (MSB first, LSB last)
-+ for(i=SPI_ADD_LEN-1;i>=0;i--)
-+ {
-+ bit = (addr>>i)& 0x01;
-+ SPI_write_bit(bit);
-+ }
-+ // send 16 bits data (MSB first, LSB last)
-+ for(i=SPI_DAT_LEN-1;i>=0;i--)
-+ {
-+ bit = (value>>i)& 0x01;
-+ SPI_write_bit(bit);
-+ }
-+
-+ SPI_CS_enable(0); // CS low
-+
-+ for(i=0;i<0xFFF;i++) ;
-+#ifdef CONFIG_IT8712_GPIO
-+ status = inb_gpio(LPC_GPIO_SET);
-+ status &= ~(ADM_EDIO) ; //EDIO low
-+ outb_gpio(LPC_GPIO_SET, status);
-+#else
-+ ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+ writel(GPIO_MISO,ad1); /* set MISO to 0 */
-+#endif
-+}
-+
-+
-+/************************************
-+* SPI_write_bit
-+* bit_EEDO -> 1 or 0 to be written
-+************************************/
-+void SPI_write_bit(char bit_EEDO)
-+{
-+#ifdef CONFIG_IT8712_GPIO
-+ unsigned char iomode,status;
-+
-+ iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
-+ iomode |= (ADM_EECK|ADM_EDIO|ADM_EECS) ; // Set EECK,EDIO,EECS output
-+ LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
-+
-+ if(bit_EEDO)
-+ {
-+ status = inb_gpio( LPC_GPIO_SET);
-+ status |= ADM_EDIO ; //EDIO high
-+ outb_gpio(LPC_GPIO_SET, status);
-+ }
-+ else
-+ {
-+ status = inb_gpio( LPC_GPIO_SET);
-+ status &= ~(ADM_EDIO) ; //EDIO low
-+ outb_gpio(LPC_GPIO_SET, status);
-+ }
-+
-+ status |= ADM_EECK ; //EECK high
-+ outb_gpio(LPC_GPIO_SET, status);
-+
-+ status &= ~(ADM_EECK) ; //EECK low
-+ outb_gpio(LPC_GPIO_SET, status);
-+
-+#else
-+ unsigned int addr;
-+ unsigned int value;
-+
-+ addr = (GPIO_BASE_ADDR + GPIO_PIN_DIR);
-+ value = readl(addr) |GPIO_EECK |GPIO_MISO ; /* set EECK/MISO Pin to output */
-+ writel(value,addr);
-+ if(bit_EEDO)
-+ {
-+ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+ writel(GPIO_MISO,addr); /* set MISO to 1 */
-+ writel(GPIO_EECK,addr); /* set EECK to 1 */
-+ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+ writel(GPIO_EECK,addr); /* set EECK to 0 */
-+ }
-+ else
-+ {
-+ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+ writel(GPIO_MISO,addr); /* set MISO to 0 */
-+ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+ writel(GPIO_EECK,addr); /* set EECK to 1 */
-+ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+ writel(GPIO_EECK,addr); /* set EECK to 0 */
-+ }
-+
-+ return ;
-+#endif
-+}
-+
-+/**********************************************************************
-+* read a bit from ADM6996 register
-+***********************************************************************/
-+unsigned int SPI_read_bit(void) // read data from
-+{
-+#ifdef CONFIG_IT8712_GPIO
-+ unsigned char iomode,status;
-+ unsigned int value ;
-+
-+ iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
-+ iomode &= ~(ADM_EDIO) ; // Set EDIO input
-+ iomode |= (ADM_EECS|ADM_EECK) ; // Set EECK,EECS output
-+ LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
-+
-+ status = inb_gpio( LPC_GPIO_SET);
-+ status |= ADM_EECK ; //EECK high
-+ outb_gpio(LPC_GPIO_SET, status);
-+
-+ status &= ~(ADM_EECK) ; //EECK low
-+ outb_gpio(LPC_GPIO_SET, status);
-+
-+ value = inb_gpio( LPC_GPIO_SET);
-+
-+ value = value>>2 ;
-+ value &= 0x01;
-+
-+ return value ;
-+#else
-+ unsigned int addr;
-+ unsigned int value;
-+
-+ addr = (GPIO_BASE_ADDR + GPIO_PIN_DIR);
-+ value = readl(addr) & (~GPIO_MISO); // set EECK to output and MISO to input
-+ writel(value,addr);
-+
-+ addr =(GPIO_BASE_ADDR + GPIO_DATA_SET);
-+ writel(GPIO_EECK,addr); // set EECK to 1
-+ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+ writel(GPIO_EECK,addr); // set EECK to 0
-+
-+ addr = (GPIO_BASE_ADDR + GPIO_DATA_IN);
-+ value = readl(addr) ;
-+ value = value >> 30;
-+ return value ;
-+#endif
-+}
-+
-+/******************************************
-+* SPI_default
-+* EEPROM content default value
-+*******************************************/
-+void SPI_default(void)
-+{
-+ int i;
-+#ifdef CONFIG_ADM_6999
-+ SPI_write(0x11,0xFF30);
-+ for(i=1;i<8;i++)
-+ SPI_write(i,0x840F);
-+
-+ SPI_write(0x08,0x880F); //port 8 Untag, PVID=2
-+ SPI_write(0x09,0x881D); //port 9 Tag, PVID=2 ,10M
-+ SPI_write(0x14,0x017F); //Group 0~6,8 as VLAN 1
-+ SPI_write(0x15,0x0180); //Group 7,8 as VLAN 2
-+#endif
-+
-+#ifdef CONFIG_ADM_6996
-+ SPI_write(0x11,0xFF30);
-+ SPI_write(0x01,0x840F); //port 0~3 Untag ,PVID=1 ,100M ,duplex
-+ SPI_write(0x03,0x840F);
-+ SPI_write(0x05,0x840F);
-+ SPI_write(0x07,0x840F);
-+ SPI_write(0x08,0x880F); //port 4 Untag, PVID=2
-+ SPI_write(0x09,0x881D); //port 5 Tag, PVID=2 ,10M
-+ SPI_write(0x14,0x0155); //Group 0~3,5 as VLAN 1
-+ SPI_write(0x15,0x0180); //Group 4,5 as VLAN 2
-+
-+#endif
-+
-+ for(i=0x16;i<=0x22;i++)
-+ SPI_write((unsigned char)i,0x0000); // clean VLAN¡@map 3~15
-+
-+ for (i=0;i<NUM_VLAN_IF;i++) // Set VLAN ID map 1,2
-+ SPI_Set_PVID( VLAN_conf[i].vid, VLAN_conf[i].portmap);
-+
-+ for(i=0;i<ADM699X_PORT_NO;i++) // reset count
-+ SPI_reset(0,i);
-+}
-+
-+/*************************************************
-+* SPI_reset
-+* rstype -> reset type
-+* 0:reset all count for 'port_cnt' port
-+* 1:reset specified count 'port_cnt'
-+* port_cnt -> port number or counter index
-+***************************************************/
-+void SPI_reset(unsigned char rstype,unsigned char port_cnt)
-+{
-+
-+ int i;
-+#ifdef CONFIG_IT8712_GPIO
-+ char status;
-+#else
-+ int ad1;
-+#endif
-+ char bit;
-+
-+#ifdef CONFIG_IT8712_GPIO
-+ status = inb_gpio(LPC_GPIO_SET);
-+ status &= ~(ADM_EDIO) ; //EDIO low
-+ outb_gpio(LPC_GPIO_SET, status);
-+#else
-+ ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+ writel(GPIO_MISO,ad1); /* set MISO to 0 */
-+#endif
-+
-+ SPI_CS_enable(0); // CS low
-+
-+ SPI_pre_st(); // PRE+ST
-+ SPI_write_bit(0); // OP
-+ SPI_write_bit(1);
-+
-+ SPI_write_bit(1); // Table select, must be 1 -> reset Counter
-+
-+ SPI_write_bit(0); // Device Address
-+ SPI_write_bit(0);
-+
-+ rstype &= 0x01;
-+ SPI_write_bit(rstype); // Reset type 0:clear dedicate port's all counters 1:clear dedicate counter
-+
-+ for (i=5;i>=0;i--) // port or cnt index
-+ {
-+ bit = port_cnt >> i ;
-+ bit &= 0x01 ;
-+ SPI_write_bit(bit);
-+ }
-+
-+ SPI_write_bit(0); // dumy clock
-+ SPI_write_bit(0); // dumy clock
-+
-+#ifdef CONFIG_IT8712_GPIO
-+ status = inb_gpio(LPC_GPIO_SET);
-+ status &= ~(ADM_EDIO) ; //EDIO low
-+ outb_gpio(LPC_GPIO_SET, status);
-+#else
-+ ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+ writel(GPIO_MISO,ad1); /* set MISO to 0 */
-+#endif
-+}
-+
-+/*****************************************************
-+* SPI_pre_st
-+* preambler: 32 bits '1' start bit: '01'
-+*****************************************************/
-+void SPI_pre_st(void)
-+{
-+ int i;
-+
-+ for(i=0;i<32;i++) // PREAMBLE
-+ SPI_write_bit(1);
-+ SPI_write_bit(0); // ST
-+ SPI_write_bit(1);
-+}
-+
-+
-+/***********************************************************
-+* SPI_CS_enable
-+* before access ,you have to enable Chip Select. (pull high)
-+* When fisish, you should pull low !!
-+*************************************************************/
-+void SPI_CS_enable(unsigned char enable)
-+{
-+#ifdef CONFIG_IT8712_GPIO
-+
-+ unsigned char iomode,status;
-+
-+ iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
-+ iomode |= (ADM_EECK|ADM_EDIO|ADM_EECS) ; // Set EECK,EDIO,EECS output
-+ LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
-+
-+
-+ status = inb_gpio( LPC_GPIO_SET);
-+ if(enable)
-+ status |= ADM_EECS ; //EECS high
-+ else
-+ status &= ~(ADM_EECS) ; //EECS low
-+
-+ outb_gpio(LPC_GPIO_SET, status);
-+
-+
-+ status |= ADM_EECK ; //EECK high
-+ outb_gpio(LPC_GPIO_SET, status);
-+
-+ status &= ~(ADM_EECK) ; //EECK low
-+ outb_gpio(LPC_GPIO_SET, status);
-+
-+#else
-+ unsigned int addr,value;
-+
-+ addr = (GPIO_BASE_ADDR + GPIO_PIN_DIR);
-+ value = readl(addr) |GPIO_EECS |GPIO_EECK; /* set EECS/EECK Pin to output */
-+ writel(value,addr);
-+
-+ if(enable)
-+ {
-+ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+ writel(GPIO_EECS,addr); /* set EECS to 1 */
-+
-+ }
-+ else
-+ {
-+ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+ writel(GPIO_EECS,addr); /* set EECS to 0 */
-+ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+ writel(GPIO_EECK,addr); /* set EECK to 1 */ // at least one clock after CS low
-+ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+ writel(GPIO_EECK,addr); /* set EECK to 0 */
-+ }
-+#endif
-+}
-+
-+/*********************************************************
-+* SPI_Set_VLAN: group ports as VLAN
-+* LAN -> VLAN number : 0~16
-+* port_mask -> ports which would group as LAN
-+* ex. 0x03 = 0000 0011
-+* port 0 and port 1
-+*********************************************************/
-+void SPI_Set_VLAN(unsigned char LAN,unsigned int port_mask)
-+{
-+ unsigned int i,value=0;
-+ unsigned reg_add = 0x13 + LAN ;
-+
-+ for(i=0;i<ADM6996_PORT_NO;i++)
-+ { if(port_mask&0x01)
-+ {
-+ switch(i)
-+ {
-+ case 0: value|=0x0001; break; //port0:bit[0]
-+ case 1: value|=0x0004; break; //port1:bit[2]
-+ case 2: value|=0x0010; break; //port2:bit[4]
-+ case 3: value|=0x0040; break; //port3:bit[6]
-+ case 4: value|=0x0080; break; //port4:bit[7]
-+ case 5: value|=0x0100; break; //port5:bit[8]
-+ }
-+ }
-+ port_mask >>= 1;
-+ }
-+
-+ SPI_write(reg_add,value);
-+}
-+
-+
-+/*******************************************
-+* SPI_Set_tag
-+* port -> port number to set tag or untag
-+* tag -> 0/set untag, 1/set tag
-+* In general, tag is for MII port. LAN and
-+* WAN port is configed as untag!!
-+********************************************/
-+void SPI_Set_tag(unsigned int port,unsigned tag)
-+{
-+ unsigned int regadd,value;
-+
-+ // mapping port's register !! (0,1,2,3,4,5) ==> (1,3,5,7,8,9)
-+ if(port<=3)
-+ regadd=2*port+1;
-+ else if(port==4) regadd = 8 ;
-+ else regadd = 9 ;
-+
-+
-+ value = SPI_read(0,regadd); //read original setting
-+
-+ if(tag)
-+ value |= 0x0010 ; // set tag
-+ else
-+ value &= 0xFFEF ; // set untag
-+
-+ SPI_write(regadd,value); // write back!!
-+}
-+
-+/************************************************
-+* SPI_Set_PVID
-+* PVID -> PVID number :
-+* port_mask -> ports which would group as LAN
-+* ex. 0x0F = 0000 1111 ==> port 0~3
-+************************************************/
-+void SPI_Set_PVID(unsigned int PVID,unsigned int port_mask)
-+{
-+ unsigned int i,value=0;
-+
-+ PVID &= 0x000F ;
-+
-+ for(i=0;i<ADM699X_PORT_NO;i++)
-+ { if(port_mask&0x01)
-+ {
-+#ifdef CONFIG_ADM_6996
-+ switch(i)
-+ {
-+ case 0:
-+ value = SPI_read(0,0x01); // read original value
-+ value &= 0xC3FF ; //set PVIC column as 0 first
-+ value |= PVID << 10 ; //Set PVID column as PVID
-+ SPI_write(0x01,value); //write back
-+ break;
-+ case 1:
-+ value = SPI_read(0,0x03);
-+ value &= 0xC3FF ;
-+ value |= PVID << 10 ;
-+ SPI_write(0x03,value);
-+ break;
-+ case 2:
-+ value = SPI_read(0,0x05);
-+ value &= 0xC3FF ;
-+ value |= PVID << 10 ;
-+ SPI_write(0x05,value);
-+ break;
-+ case 3:
-+ value = SPI_read(0,0x07);
-+ value &= 0xC3FF ;
-+ value |= PVID << 10 ;
-+ SPI_write(0x07,value);
-+ break;
-+ case 4:
-+ value = SPI_read(0,0x08);
-+ value &= 0xC3FF ;
-+ value |= PVID << 10 ;
-+ SPI_write(0x08,value);
-+ break;
-+ case 5:
-+ value = SPI_read(0,0x09);
-+ value &= 0xC3FF ;
-+ value |= PVID << 10 ;
-+ SPI_write(0x09,value);
-+ break;
-+ }
-+#endif
-+#ifdef CONFIG_ADM_6999
-+ value = SPI_read(0,(unsigned char)i+1);
-+ value &= 0xC3FF ;
-+ value |= PVID << 10 ;
-+ SPI_write((unsigned char)i+1,value);
-+#endif
-+ }
-+ port_mask >>= 1;
-+ }
-+}
-+
-+
-+/************************************************
-+* SPI_get_PVID
-+* port -> which ports to VID
-+************************************************/
-+unsigned int SPI_Get_PVID(unsigned int port)
-+{
-+ unsigned int value=0;
-+
-+ if (port>=ADM6996_PORT_NO)
-+ return 0;
-+
-+ switch(port)
-+ {
-+ case 0:
-+ value = SPI_read(0,0x01); // read original value
-+ value &= 0x3C00 ; // get VID
-+ value = value >> 10 ; // Shift
-+ break;
-+ case 1:
-+ value = SPI_read(0,0x03);
-+ value &= 0x3C00 ;
-+ value = value >> 10 ;
-+ break;
-+ case 2:
-+ value = SPI_read(0,0x05);
-+ value &= 0x3C00 ;
-+ value = value >> 10 ;
-+ break;
-+ case 3:
-+ value = SPI_read(0,0x07);
-+ value &= 0x3C00 ;
-+ value = value >> 10 ;
-+ break;
-+ case 4:
-+ value = SPI_read(0,0x08);
-+ value &= 0x3C00 ;
-+ value = value >> 10 ;
-+ break;
-+ case 5:
-+ value = SPI_read(0,0x09);
-+ value &= 0x3C00 ;
-+ value = value >> 10 ;
-+ break;
-+ }
-+ return value ;
-+}
-+
-+
-+/**********************************************
-+* SPI_mac_clone
-+* port -> the port which will lock or unlock
-+* lock -> 0/the port will be unlock
-+* 1/the port will be locked
-+**********************************************/
-+void SPI_mac_lock(unsigned int port, unsigned char lock)
-+{
-+ unsigned int i,value=0;
-+
-+ value = SPI_read(0,0x12); // read original
-+
-+ for(i=0;i<ADM6996_PORT_NO;i++)
-+ { if(lock) // lock port
-+ {
-+ switch(port)
-+ {
-+ case 0: value|=0x0001; break; //port0:bit[0]
-+ case 1: value|=0x0004; break; //port1:bit[2]
-+ case 2: value|=0x0010; break; //port2:bit[4]
-+ case 3: value|=0x0040; break; //port3:bit[6]
-+ case 4: value|=0x0080; break; //port4:bit[7]
-+ case 5: value|=0x0100; break; //port5:bit[8]
-+ }
-+ }
-+ else
-+ {
-+ switch(i) // unlock port
-+ {
-+ case 0: value&=0xFFFE; break;
-+ case 1: value&=0xFFFB; break;
-+ case 2: value&=0xFFEF; break;
-+ case 3: value&=0xFFBF; break;
-+ case 4: value&=0xFF7F; break;
-+ case 5: value&=0xFEFF; break;
-+ }
-+ }
-+ }
-+
-+ SPI_write(0x12,value);
-+}
-+
-+
-+/***************************************************
-+* SPI_learn_pause
-+* pause = 01-80-c2-00-00-01
-+* DA=distination address
-+* forward -> 0: if DA == pause then drop and stop mac learning
-+* 1: if DA == pause ,then forward it
-+***************************************************/
-+void SPI_pause_cmd_forward(unsigned char forward)
-+{
-+ unsigned int value=0;
-+
-+ value = SPI_read(0,0x2C); // read original setting
-+ if(forward)
-+ value |= 0x2000; // set bit[13] '1'
-+ else
-+ value &= 0xDFFF; // set bit[13] '0'
-+
-+ SPI_write(0x2C,value);
-+
-+}
-+
-+
-+/************************************************
-+* SPI_read
-+* table -> which table to be read: 1/count 0/EEPROM
-+* addr -> Address to be read
-+* return : Value of the register
-+*************************************************/
-+unsigned int SPI_read(unsigned char table,unsigned char addr)
-+{
-+ int i ;
-+ unsigned int value=0;
-+ unsigned int bit;
-+#ifdef CONFIG_IT8712_GPIO
-+ unsigned char status;
-+#else
-+ unsigned int ad1;
-+#endif
-+
-+#ifdef CONFIG_IT8712_GPIO
-+ status = inb_gpio(LPC_GPIO_SET);
-+ status &= ~(ADM_EDIO) ; //EDIO low
-+ outb_gpio(LPC_GPIO_SET, status);
-+#else
-+ ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+ writel(GPIO_MISO,ad1); /* set MISO to 0 */
-+#endif
-+
-+ SPI_CS_enable(0);
-+
-+ SPI_pre_st(); // PRE+ST
-+ SPI_write_bit(1); // OPCODE '10' for read
-+ SPI_write_bit(0);
-+
-+ (table==1) ? SPI_write_bit(1) : SPI_write_bit(0) ; // table select
-+
-+ SPI_write_bit(0); // Device Address
-+ SPI_write_bit(0);
-+
-+
-+ // send 7 bits address to be read
-+ for (i=6;i>=0;i--) {
-+ bit= ((addr>>i) & 0x01) ? 1 :0 ;
-+ SPI_write_bit(bit);
-+ }
-+
-+
-+ // turn around
-+ SPI_read_bit(); // TA_Z
-+
-+ value=0;
-+ for (i=31;i>=0;i--) { // READ DATA
-+ bit=SPI_read_bit();
-+ value |= bit << i ;
-+ }
-+
-+ SPI_read_bit(); // dumy clock
-+ SPI_read_bit(); // dumy clock
-+
-+ if(!table) // EEPROM, only fetch 16 bits data
-+ {
-+ if(addr&0x01) // odd number content (register,register-1)
-+ value >>= 16 ; // so we remove the rear 16bits
-+ else // even number content (register+1,register),
-+ value &= 0x0000FFFF ; // so we keep the rear 16 bits
-+ }
-+
-+
-+ SPI_CS_enable(0);
-+
-+#ifdef CONFIG_IT8712_GPIO
-+ status = inb_gpio(LPC_GPIO_SET);
-+ status &= ~(ADM_EDIO) ; //EDIO low
-+ outb_gpio(LPC_GPIO_SET, status);
-+#else
-+ ad1 = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+ writel(GPIO_MISO,ad1); /* set MISO to 0 */
-+#endif
-+
-+ return(value);
-+
-+}
-+
-+
-+
-+/**************************************************
-+* SPI_port_en
-+* port -> Number of port to config
-+* enable -> 1/ enable this port
-+* 0/ disable this port
-+**************************************************/
-+void SPI_port_enable(unsigned int port,unsigned char enable)
-+{
-+ unsigned int reg_val ;
-+ unsigned char reg_add ;
-+
-+ if(port<=3)
-+ reg_add=2*port+1;
-+ else if(port==4) reg_add = 8 ;
-+ else reg_add = 9 ;
-+
-+ reg_val = SPI_read(0,reg_add);
-+ if(enable)
-+ {
-+ reg_val &= 0xFFDF ;
-+ SPI_write(reg_add,reg_val);
-+ }
-+ else
-+ {
-+ reg_val |= 0x0020 ;
-+ SPI_write(reg_add,reg_val);
-+ }
-+}
-+
-+/********************************************************
-+* get port status
-+* port -> specify the port number to get configuration
-+*********************************************************/
-+void SPI_get_status(unsigned int port)
-+{
-+/* unsigned int reg_val,add_offset[6];
-+ struct PORT_STATUS *status;
-+ status = &port_state[port];
-+
-+ if(port>(ADM6996_PORT_NO-1))
-+ return ;
-+
-+ // Link estabilish , speed, deplex, flow control ?
-+ if(port < 5 )
-+ {
-+ reg_val = SPI_read(1, 1) ;
-+ if(port < 4)
-+ reg_val >>= port*8 ;
-+ else
-+ reg_val >>=28 ;
-+ status->link = reg_val & 0x00000001 ;
-+ status->speed = reg_val & 0x00000002 ;
-+ status->duplex = reg_val & 0x00000004 ;
-+ status->flow_ctl = reg_val & 0x00000008 ;
-+ }
-+ else if(port ==5 )
-+ {
-+ reg_val = SPI_read(1, 2) ;
-+ status->link = reg_val & 0x00000001 ;
-+ status->speed = reg_val & 0x00000002 ;
-+ status->duplex = reg_val & 0x00000008 ;
-+ status->flow_ctl = reg_val & 0x00000010 ;
-+ }
-+
-+ // Mac Lock ?
-+ reg_val = SPI_read(0,0x12);
-+ switch(port)
-+ {
-+ case 0: status->mac_lock = reg_val & 0x00000001;
-+ case 1: status->mac_lock = reg_val & 0x00000004;
-+ case 2: status->mac_lock = reg_val & 0x00000010;
-+ case 3: status->mac_lock = reg_val & 0x00000040;
-+ case 4: status->mac_lock = reg_val & 0x00000080;
-+ case 5: status->mac_lock = reg_val & 0x00000100;
-+ }
-+
-+ // port enable ?
-+ add_offset[0] = 0x01 ; add_offset[1] = 0x03 ;
-+ add_offset[2] = 0x05 ; add_offset[3] = 0x07 ;
-+ add_offset[4] = 0x08 ; add_offset[5] = 0x09 ;
-+ reg_val = SPI_read(0,add_offset[port]);
-+ status->port_disable = reg_val & 0x0020;
-+
-+
-+ // Packet Count ...
-+ add_offset[0] = 0x04 ; add_offset[1] = 0x06 ;
-+ add_offset[2] = 0x08 ; add_offset[3] = 0x0a ;
-+ add_offset[4] = 0x0b ; add_offset[5] = 0x0c ;
-+
-+ reg_val = SPI_read(1,add_offset[port]);
-+ status->rx_pac_count = reg_val ;
-+ reg_val = SPI_read(1,add_offset[port]+9);
-+ status->rx_pac_byte = reg_val ;
-+ reg_val = SPI_read(1,add_offset[port]+18);
-+ status->tx_pac_count = reg_val ;
-+ reg_val = SPI_read(1,add_offset[port]+27);
-+ status->tx_pac_byte = reg_val ;
-+ reg_val = SPI_read(1,add_offset[port]+36);
-+ status->collision_count = reg_val ;
-+ reg_val = SPI_read(1,add_offset[port]+45);
-+ status->error_count = reg_val ;
-+ reg_val = SPI_read(1, 0x3A);
-+ switch(port)
-+ {
-+ case 0: status->rx_pac_count_overflow = reg_val & 0x00000001;
-+ status->rx_pac_byte_overflow = reg_val & 0x00000200 ;
-+ case 1: status->rx_pac_count_overflow = reg_val & 0x00000004;
-+ status->rx_pac_byte_overflow = reg_val & 0x00000800 ;
-+ case 2: status->rx_pac_count_overflow = reg_val & 0x00000010;
-+ status->rx_pac_byte_overflow = reg_val & 0x00002000 ;
-+ case 3: status->rx_pac_count_overflow = reg_val & 0x00000040;;
-+ status->rx_pac_byte_overflow = reg_val & 0x00008000 ;
-+ case 4: status->rx_pac_count_overflow = reg_val & 0x00000080;
-+ status->rx_pac_byte_overflow = reg_val & 0x00010000 ;
-+ case 5: status->rx_pac_count_overflow = reg_val & 0x00000100;
-+ status->rx_pac_byte_overflow = reg_val & 0x00020000 ;
-+ }
-+
-+ reg_val = SPI_read(1, 0x3B);
-+ switch(port)
-+ {
-+ case 0: status->tx_pac_count_overflow = reg_val & 0x00000001;
-+ status->tx_pac_byte_overflow = reg_val & 0x00000200 ;
-+ case 1: status->tx_pac_count_overflow = reg_val & 0x00000004;
-+ status->tx_pac_byte_overflow = reg_val & 0x00000800 ;
-+ case 2: status->tx_pac_count_overflow = reg_val & 0x00000010;
-+ status->tx_pac_byte_overflow = reg_val & 0x00002000 ;
-+ case 3: status->tx_pac_count_overflow = reg_val & 0x00000040;;
-+ status->tx_pac_byte_overflow = reg_val & 0x00008000 ;
-+ case 4: status->tx_pac_count_overflow = reg_val & 0x00000080;
-+ status->tx_pac_byte_overflow = reg_val & 0x00010000 ;
-+ case 5: status->tx_pac_count_overflow = reg_val & 0x00000100;
-+ status->tx_pac_byte_overflow = reg_val & 0x00020000 ;
-+ }
-+*/
-+
-+ unsigned int reg_val;
-+ struct PORT_STATUS *status;
-+ status = &port_state[port];
-+
-+ if(port>=ADM6999_PORT_NO)
-+ return ;
-+
-+ // Link estabilish , speed, deplex, flow control ?
-+ if(port < ADM6999_PORT_NO-1 )
-+ {
-+ reg_val = SPI_read(1, 0x01) ;
-+ reg_val = reg_val >> port*4 ;
-+ status->link = reg_val & 0x00000001 ;
-+ status->speed = reg_val & 0x00000002 ;
-+ status->duplex = reg_val & 0x00000004 ;
-+ status->flow_ctl = reg_val & 0x00000008 ;
-+ }
-+ else if(port == (ADM6999_PORT_NO-1) )
-+ {
-+ reg_val = SPI_read(1, 0x02) ;
-+ status->link = reg_val & 0x00000001 ;
-+ status->speed = reg_val & 0x00000002 ;
-+ status->duplex = reg_val & 0x00000008 ;
-+ status->flow_ctl = reg_val & 0x00000010 ;
-+ }
-+
-+ // Mac Lock ?
-+ reg_val = SPI_read(0,0x12);
-+ reg_val = reg_val >> port ;
-+ reg_val = reg_val & 0x01 ;
-+ status->mac_lock = reg_val ? 0x01:0x00 ;
-+
-+ // port enable ?
-+ reg_val = SPI_read(0,(unsigned char)port+1);
-+ status->port_disable = reg_val & 0x0020;
-+
-+ // Packet Count ...
-+ reg_val = SPI_read(1,(unsigned char)port+0x04);
-+ status->rx_pac_count = reg_val ;
-+ reg_val = SPI_read(1,(unsigned char)port+0x0D);
-+ status->rx_pac_byte = reg_val ;
-+ reg_val = SPI_read(1,(unsigned char)port+0x16);
-+ status->tx_pac_count = reg_val ;
-+ reg_val = SPI_read(1,(unsigned char)port+0x1F);
-+ status->tx_pac_byte = reg_val ;
-+ reg_val = SPI_read(1,(unsigned char)port+0x28);
-+ status->collision_count = reg_val ;
-+ reg_val = SPI_read(1,(unsigned char)port+0x31);
-+ status->error_count = reg_val ;
-+ reg_val = SPI_read(1, 0x3A);
-+ reg_val = reg_val >> port ;
-+ status->rx_pac_count_overflow = reg_val & 0x00000001;
-+ reg_val = reg_val >> 0x09 ;
-+ status->rx_pac_byte_overflow = reg_val & 0x00000001 ;
-+
-+ reg_val = SPI_read(1, 0x3B);
-+ reg_val = reg_val >> port ;
-+ status->tx_pac_count_overflow = reg_val & 0x00000001;
-+ reg_val = reg_val >> 0x09 ;
-+ status->tx_pac_byte_overflow = reg_val & 0x00000001 ;
-+
-+ reg_val = SPI_read(1, 0x3C);
-+ reg_val = reg_val >> port ;
-+ status->collision_count_overflow = reg_val & 0x00000001;
-+ reg_val = reg_val >> 0x09 ;
-+ status->error_count_overflow = reg_val & 0x00000001 ;
-+
-+}
-+
-+unsigned int SPI_get_identifier(void)
-+{
-+ unsigned int flag=0;
-+
-+#ifdef CONFIG_IT8712_GPIO
-+
-+ if (!it8712_exist) {
-+ return -ENODEV;
-+ }
-+ printk("it8712_gpio init\n");
-+
-+ /* initialize registers */
-+ // switch all multi-function pins to GPIO
-+ LPCSetConfig(LDN_GPIO, 0x28, 0xff);
-+
-+ // set simple I/O base address
-+ LPCSetConfig(LDN_GPIO, 0x62, IT8712_GPIO_BASE >> 8);
-+ LPCSetConfig(LDN_GPIO, 0x63, (unsigned char) IT8712_GPIO_BASE >> 8);
-+
-+ // select GPIO to simple I/O
-+ LPCSetConfig(LDN_GPIO, 0xc3, 0xff);
-+
-+ // enable internal pull-up
-+ LPCSetConfig(LDN_GPIO, 0xbb, 0xff);
-+
-+#endif
-+
-+ flag = SPI_read(1,0x00);
-+ printk("Get ADM identifier %6x\n",flag);
-+ if ((flag & 0xFFFF0) == 0x21120) {
-+ printk("ADM699X Found\n");
-+ return 1;
-+ }
-+ else {
-+ printk("ADM699X not Found\n");
-+ return 0;
-+ }
-+}
-+
---- /dev/null
-+++ b/drivers/net/sl351x_crc16.c
-@@ -0,0 +1,93 @@
-+/****************************************************************************
-+* Name : sl351x_crc16.c
-+* Description :
-+* Implement CRC16
-+* refer to RFC1662
-+* History
-+*
-+* Date Writer Description
-+* ----------- ----------- -------------------------------------------------
-+* 09/14/2005 Gary Chen Create
-+*
-+****************************************************************************/
-+
-+#define INITFCS16 0xffff /* Initial FCS value */
-+#define GOODFCS16 0xf0b8 /* Good final FCS value */
-+#define SWAP_WORD(x) (unsigned short)((((unsigned short)x & 0x00FF) << 8) | \
-+ (((unsigned short)x & 0xFF00) >> 8))
-+
-+/*----------------------------------------------------------------------
-+* x**0 + x**5 + x**12 + x**16
-+*----------------------------------------------------------------------*/
-+static const unsigned short crc16_tbl[256] = {
-+ 0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf,
-+ 0x8c48, 0x9dc1, 0xaf5a, 0xbed3, 0xca6c, 0xdbe5, 0xe97e, 0xf8f7,
-+ 0x1081, 0x0108, 0x3393, 0x221a, 0x56a5, 0x472c, 0x75b7, 0x643e,
-+ 0x9cc9, 0x8d40, 0xbfdb, 0xae52, 0xdaed, 0xcb64, 0xf9ff, 0xe876,
-+ 0x2102, 0x308b, 0x0210, 0x1399, 0x6726, 0x76af, 0x4434, 0x55bd,
-+ 0xad4a, 0xbcc3, 0x8e58, 0x9fd1, 0xeb6e, 0xfae7, 0xc87c, 0xd9f5,
-+ 0x3183, 0x200a, 0x1291, 0x0318, 0x77a7, 0x662e, 0x54b5, 0x453c,
-+ 0xbdcb, 0xac42, 0x9ed9, 0x8f50, 0xfbef, 0xea66, 0xd8fd, 0xc974,
-+ 0x4204, 0x538d, 0x6116, 0x709f, 0x0420, 0x15a9, 0x2732, 0x36bb,
-+ 0xce4c, 0xdfc5, 0xed5e, 0xfcd7, 0x8868, 0x99e1, 0xab7a, 0xbaf3,
-+ 0x5285, 0x430c, 0x7197, 0x601e, 0x14a1, 0x0528, 0x37b3, 0x263a,
-+ 0xdecd, 0xcf44, 0xfddf, 0xec56, 0x98e9, 0x8960, 0xbbfb, 0xaa72,
-+ 0x6306, 0x728f, 0x4014, 0x519d, 0x2522, 0x34ab, 0x0630, 0x17b9,
-+ 0xef4e, 0xfec7, 0xcc5c, 0xddd5, 0xa96a, 0xb8e3, 0x8a78, 0x9bf1,
-+ 0x7387, 0x620e, 0x5095, 0x411c, 0x35a3, 0x242a, 0x16b1, 0x0738,
-+ 0xffcf, 0xee46, 0xdcdd, 0xcd54, 0xb9eb, 0xa862, 0x9af9, 0x8b70,
-+ 0x8408, 0x9581, 0xa71a, 0xb693, 0xc22c, 0xd3a5, 0xe13e, 0xf0b7,
-+ 0x0840, 0x19c9, 0x2b52, 0x3adb, 0x4e64, 0x5fed, 0x6d76, 0x7cff,
-+ 0x9489, 0x8500, 0xb79b, 0xa612, 0xd2ad, 0xc324, 0xf1bf, 0xe036,
-+ 0x18c1, 0x0948, 0x3bd3, 0x2a5a, 0x5ee5, 0x4f6c, 0x7df7, 0x6c7e,
-+ 0xa50a, 0xb483, 0x8618, 0x9791, 0xe32e, 0xf2a7, 0xc03c, 0xd1b5,
-+ 0x2942, 0x38cb, 0x0a50, 0x1bd9, 0x6f66, 0x7eef, 0x4c74, 0x5dfd,
-+ 0xb58b, 0xa402, 0x9699, 0x8710, 0xf3af, 0xe226, 0xd0bd, 0xc134,
-+ 0x39c3, 0x284a, 0x1ad1, 0x0b58, 0x7fe7, 0x6e6e, 0x5cf5, 0x4d7c,
-+ 0xc60c, 0xd785, 0xe51e, 0xf497, 0x8028, 0x91a1, 0xa33a, 0xb2b3,
-+ 0x4a44, 0x5bcd, 0x6956, 0x78df, 0x0c60, 0x1de9, 0x2f72, 0x3efb,
-+ 0xd68d, 0xc704, 0xf59f, 0xe416, 0x90a9, 0x8120, 0xb3bb, 0xa232,
-+ 0x5ac5, 0x4b4c, 0x79d7, 0x685e, 0x1ce1, 0x0d68, 0x3ff3, 0x2e7a,
-+ 0xe70e, 0xf687, 0xc41c, 0xd595, 0xa12a, 0xb0a3, 0x8238, 0x93b1,
-+ 0x6b46, 0x7acf, 0x4854, 0x59dd, 0x2d62, 0x3ceb, 0x0e70, 0x1ff9,
-+ 0xf78f, 0xe606, 0xd49d, 0xc514, 0xb1ab, 0xa022, 0x92b9, 0x8330,
-+ 0x7bc7, 0x6a4e, 0x58d5, 0x495c, 0x3de3, 0x2c6a, 0x1ef1, 0x0f78
-+};
-+
-+/*----------------------------------------------------------------------
-+* hash_crc16
-+*----------------------------------------------------------------------*/
-+unsigned short hash_crc16(unsigned short crc, unsigned char *datap, unsigned long len)
-+{
-+ while (len--)
-+ {
-+ crc = (crc >> 8) ^ crc16_tbl[(crc ^ (*datap++)) & 0xff];
-+ }
-+
-+ return (crc);
-+
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_check_crc16
-+*----------------------------------------------------------------------*/
-+unsigned long hash_check_crc16(unsigned char *datap, unsigned long len)
-+{
-+ unsigned short crc;
-+
-+ crc = hash_crc16(INITFCS16, datap, len );
-+ return (crc == GOODFCS16) ? 0 : 1;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_gen_crc16
-+*----------------------------------------------------------------------*/
-+unsigned short hash_gen_crc16(unsigned char *datap, unsigned long len)
-+{
-+ unsigned short crc;
-+
-+ crc = hash_crc16(INITFCS16, datap, len);
-+ crc ^= 0xffff;
-+
-+ return(SWAP_WORD(crc));
-+}
---- /dev/null
-+++ b/drivers/net/sl351x_gmac.c
-@@ -0,0 +1,5622 @@
-+/**************************************************************************
-+* Copyright 2006 StorLink Semiconductors, Inc. All rights reserved.
-+*--------------------------------------------------------------------------
-+* Name : sl351x_gmac.c
-+* Description :
-+* Ethernet device driver for Storlink SL351x FPGA
-+*
-+* History
-+*
-+* Date Writer Description
-+* ----------- ----------- -------------------------------------------------
-+* 08/22/2005 Gary Chen Create and implement
-+* 27/10/2005 CH Hsu Porting to Linux
-+*
-+****************************************************************************/
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/mm.h>
-+#include <linux/compiler.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/ioport.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/rtnetlink.h>
-+#include <linux/delay.h>
-+#include <linux/ethtool.h>
-+#include <linux/mii.h>
-+#include <linux/completion.h>
-+#include <asm/hardware.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/semaphore.h>
-+#include <asm/arch/irqs.h>
-+#include <asm/arch/it8712.h>
-+#include <linux/mtd/kvctl.h>
-+#include <linux/skbuff.h>
-+#include <linux/in.h>
-+#include <linux/ip.h>
-+#include <linux/tcp.h>
-+#include <linux/udp.h>
-+
-+#include <linux/mtd/kvctl.h>
-+
-+#define MIDWAY
-+#define SL_LEPUS
-+#define VITESSE_G5SWITCH 1
-+
-+#ifndef CONFIG_SL351x_RXTOE
-+//#define CONFIG_SL351x_RXTOE 1
-+#endif
-+#undef CONFIG_SL351x_RXTOE
-+
-+#include <asm/arch/sl2312.h>
-+#include <asm/arch/sl351x_gmac.h>
-+#include <asm/arch/sl351x_hash_cfg.h>
-+#include <asm/arch/sl351x_nat_cfg.h>
-+
-+#ifdef CONFIG_SL351x_SYSCTL
-+#include <linux/sysctl_storlink.h>
-+#endif
-+
-+#ifdef CONFIG_SL351x_RXTOE
-+#include <asm/arch/sl351x_toe.h>
-+#include <net/tcp.h>
-+#include <linux/tcp.h>
-+#include <linux/ip.h>
-+#endif
-+
-+// #define SL351x_TEST_WORKAROUND
-+#ifdef CONFIG_SL351x_NAT
-+#define CONFIG_SL_NAPI 1
-+#endif
-+#define GMAX_TX_INTR_DISABLED 1
-+#define DO_HW_CHKSUM 1
-+#define ENABLE_TSO 1
-+#define GMAC_USE_TXQ0 1
-+// #define NAT_WORKAROUND_BY_RESET_GMAC 1
-+// #define HW_RXBUF_BY_KMALLOC 1
-+//#define _DUMP_TX_TCP_CONTENT 1
-+#define br_if_ioctl 1
-+#define GMAC_LEN_1_2_ISSUE 1
-+
-+#define GMAC_EXISTED_FLAG 0x5566abcd
-+#define CONFIG_MAC_NUM GMAC_NUM
-+#define GMAC0_BASE TOE_GMAC0_BASE
-+#define GMAC1_BASE TOE_GMAC1_BASE
-+#define PAUSE_SET_HW_FREEQ (TOE_HW_FREEQ_DESC_NUM / 2)
-+#define PAUSE_REL_HW_FREEQ ((TOE_HW_FREEQ_DESC_NUM / 2) + 10)
-+#define DEFAULT_RXQ_MAX_CNT 256
-+#ifdef L2_jumbo_frame
-+#define TCPHDRLEN(tcp_hdr) ((ntohs(*((__u16 *)tcp_hdr + 6)) >> 12) & 0x000F)
-+#endif
-+
-+/* define chip information */
-+#define DRV_NAME "SL351x"
-+#define DRV_VERSION "0.1.4"
-+#define SL351x_DRIVER_NAME DRV_NAME " Giga Ethernet driver " DRV_VERSION
-+
-+#define toe_gmac_enable_interrupt(irq) enable_irq(irq)
-+#define toe_gmac_disable_interrupt(irq) disable_irq(irq)
-+
-+#ifdef SL351x_GMAC_WORKAROUND
-+#define GMAC_SHORT_FRAME_THRESHOLD 10
-+static struct timer_list gmac_workround_timer_obj;
-+void sl351x_poll_gmac_hanged_status(u32 data);
-+#ifdef CONFIG_SL351x_NAT
-+//#define IxscriptMate_1518 1
-+ void sl351x_nat_workaround_init(void);
-+ #ifndef NAT_WORKAROUND_BY_RESET_GMAC
-+ static void sl351x_nat_workaround_handler(void);
-+ #endif
-+#endif
-+#endif
-+
-+#ifdef GMAC_LEN_1_2_ISSUE
-+ #define _DEBUG_PREFETCH_NUM 256
-+static int _debug_prefetch_cnt;
-+static char _debug_prefetch_buf[_DEBUG_PREFETCH_NUM][4] __attribute__((aligned(4)));
-+#endif
-+/*************************************************************
-+ * Global Variable
-+ *************************************************************/
-+static int gmac_initialized = 0;
-+TOE_INFO_T toe_private_data;
-+//static int do_again = 0;
-+spinlock_t gmac_fq_lock;
-+unsigned int FLAG_SWITCH;
-+
-+static unsigned int next_tick = 3 * HZ;
-+static unsigned char eth_mac[CONFIG_MAC_NUM][6]= {{0x00,0x11,0x11,0x87,0x87,0x87}, {0x00,0x22,0x22,0xab,0xab,0xab}};
-+
-+#undef CONFIG_SL351x_RXTOE
-+extern NAT_CFG_T nat_cfg;
-+
-+/************************************************/
-+/* function declare */
-+/************************************************/
-+static int gmac_set_mac_address(struct net_device *dev, void *addr);
-+static unsigned int gmac_get_phy_vendor(int phy_addr);
-+static void gmac_set_phy_status(struct net_device *dev);
-+void gmac_get_phy_status(struct net_device *dev);
-+static int gmac_netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-+static void gmac_tx_timeout(struct net_device *dev);
-+static int gmac_phy_thread (void *data);
-+struct net_device_stats * gmac_get_stats(struct net_device *dev);
-+static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev);
-+static void gmac_set_rx_mode(struct net_device *dev);
-+static irqreturn_t toe_gmac_interrupt (int irq, void *dev_instance);
-+static void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp);
-+unsigned int mii_read(unsigned char phyad,unsigned char regad);
-+void mii_write(unsigned char phyad,unsigned char regad,unsigned int value);
-+void mac_init_drv(void);
-+
-+static void toe_init_free_queue(void);
-+static void toe_init_swtx_queue(void);
-+static void toe_init_default_queue(void);
-+#ifdef CONFIG_SL351x_RXTOE
-+static void toe_init_interrupt_queue(void);
-+#endif
-+static void toe_init_interrupt_config(void);
-+static void toe_gmac_sw_reset(void);
-+static int toe_gmac_init_chip(struct net_device *dev);
-+static void toe_gmac_enable_tx_rx(struct net_device* dev);
-+static void toe_gmac_disable_tx_rx(struct net_device *dev);
-+static void toe_gmac_hw_start(struct net_device *dev);
-+static void toe_gmac_hw_stop(struct net_device *dev);
-+static int toe_gmac_clear_counter(struct net_device *dev);
-+static void toe_init_gmac(struct net_device *dev);
-+static void toe_gmac_tx_complete(GMAC_INFO_T *tp, unsigned int tx_qid, struct net_device *dev, int interrupt);
-+#ifdef CONFIG_SL_NAPI
-+static int gmac_rx_poll(struct net_device *dev, int *budget);
-+// static void toe_gmac_disable_rx(struct net_device *dev);
-+// static void toe_gmac_enable_rx(struct net_device *dev);
-+#endif
-+
-+u32 mac_read_dma_reg(int mac, unsigned int offset);
-+void mac_write_dma_reg(int mac, unsigned int offset, u32 data);
-+void mac_stop_txdma(struct net_device *dev);
-+void mac_get_sw_tx_weight(struct net_device *dev, char *weight);
-+void mac_set_sw_tx_weight(struct net_device *dev, char *weight);
-+void mac_get_hw_tx_weight(struct net_device *dev, char *weight);
-+void mac_set_hw_tx_weight(struct net_device *dev, char *weight);
-+static inline void toe_gmac_fill_free_q(void);
-+
-+#ifdef VITESSE_G5SWITCH
-+extern int Get_Set_port_status(void);
-+extern int SPI_default(void);
-+extern unsigned int SPI_get_identifier(void);
-+void gmac_get_switch_status(struct net_device *dev);
-+unsigned int Giga_switch=0;
-+unsigned int switch_port_no=0;
-+unsigned int ever_dwon=0;
-+#endif
-+
-+/************************************************/
-+/* GMAC function declare */
-+/************************************************/
-+static int gmac_open (struct net_device *dev);
-+static int gmac_close (struct net_device *dev);
-+static void gmac_cleanup_module(void);
-+static void gmac_get_mac_address(void);
-+
-+#ifdef CONFIG_SL351x_NAT
-+static void toe_init_hwtx_queue(void);
-+extern void sl351x_nat_init(void);
-+extern void sl351x_nat_input(struct sk_buff *skb, int port, void *l3off, void *l4off);
-+extern int sl351x_nat_output(struct sk_buff *skb, int port);
-+extern int sl351x_nat_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-+#endif
-+
-+#ifdef CONFIG_SL351x_RXTOE
-+extern void set_toeq_hdr(struct toe_conn* connection, TOE_INFO_T* toe, struct net_device *dev);
-+extern void sl351x_toe_init(void);
-+extern void toe_gmac_handle_toeq(struct net_device *dev, GMAC_INFO_T* tp, __u32 status);
-+extern struct toe_conn* init_toeq(int ipver, void* iph, struct tcphdr* tcp_hdr, TOE_INFO_T* toe, unsigned char* l2hdr);
-+#endif
-+
-+int mac_set_rule_reg(int mac, int rule, int enabled, u32 reg0, u32 reg1, u32 reg2);
-+void mac_set_rule_enable_bit(int mac, int rule, int data);
-+int mac_set_rule_action(int mac, int rule, int data);
-+int mac_get_MRxCRx(int mac, int rule, int ctrlreg);
-+void mac_set_MRxCRx(int mac, int rule, int ctrlreg, u32 data);
-+
-+/*----------------------------------------------------------------------
-+* Ethernet Driver init
-+*----------------------------------------------------------------------*/
-+
-+static int __init gmac_init_module(void)
-+{
-+ GMAC_INFO_T *tp;
-+ struct net_device *dev;
-+ int i,j;
-+ unsigned int chip_id;
-+// unsigned int chip_version;
-+
-+#ifdef CONFIG_SL3516_ASIC
-+{
-+ unsigned int val;
-+ /* set GMAC global register */
-+ val = readl(GMAC_GLOBAL_BASE_ADDR+0x10);
-+ val = val | 0x005f0000;
-+ writel(val,GMAC_GLOBAL_BASE_ADDR+0x10);
-+// writel(0xb737b737,GMAC_GLOBAL_BASE_ADDR+0x1c); //For Socket Board
-+ writel(0x77777777,GMAC_GLOBAL_BASE_ADDR+0x20);
-+// writel(0xa737b747,GMAC_GLOBAL_BASE_ADDR+0x1c);//For Mounting Board
-+
-+ //debug_Aaron
-+ //writel(0xa7f0a7f0,GMAC_GLOBAL_BASE_ADDR+0x1c);//For Mounting Board
-+ writel(0xa7f0b7f0,GMAC_GLOBAL_BASE_ADDR+0x1c);//For Mounting Board
-+
-+ writel(0x77777777,GMAC_GLOBAL_BASE_ADDR+0x24);
-+ writel(0x09200030,GMAC_GLOBAL_BASE_ADDR+0x2C);
-+ val = readl(GMAC_GLOBAL_BASE_ADDR+0x04);
-+ if((val&(1<<20))==0){ // GMAC1 enable
-+ val = readl(GMAC_GLOBAL_BASE_ADDR+0x30);
-+ val = (val & 0xe7ffffff) | 0x08000000;
-+ writel(val,GMAC_GLOBAL_BASE_ADDR+0x30);
-+ }
-+}
-+#endif
-+
-+#ifdef VITESSE_G5SWITCH
-+ Giga_switch = SPI_get_identifier();
-+ if(Giga_switch)
-+ switch_port_no = SPI_default();
-+#endif
-+
-+ chip_id = readl(GMAC_GLOBAL_BASE_ADDR+0x0);
-+ if (chip_id == 0x3512C1)
-+ {
-+ writel(0x5787a5f0,GMAC_GLOBAL_BASE_ADDR+0x1c);//For 3512 Switch Board
-+ writel(0x55557777,GMAC_GLOBAL_BASE_ADDR+0x20);//For 3512 Switch Board
-+ }
-+//#endif
-+
-+ mac_init_drv();
-+
-+ printk (KERN_INFO SL351x_DRIVER_NAME " built at %s %s\n", __DATE__, __TIME__);
-+
-+// init_waitqueue_entry(&wait, current);
-+
-+ // printk("GMAC Init......\n");
-+
-+ i = 0;
-+ for(j = 0; i<CONFIG_MAC_NUM; j++)
-+ {
-+ i=j;
-+ if(Giga_switch){ // if gswitch present, swap eth0/1
-+ if(j==0)
-+ i=1;
-+ else if(j==1)
-+ i=0;
-+ }
-+
-+ tp = (GMAC_INFO_T *)&toe_private_data.gmac[i];
-+ tp->dev = NULL;
-+ if (tp->existed != GMAC_EXISTED_FLAG) continue;
-+
-+ dev = alloc_etherdev(0);
-+ if (dev == NULL)
-+ {
-+ printk (KERN_ERR "Can't allocate ethernet device #%d .\n",i);
-+ return -ENOMEM;
-+ }
-+
-+ dev->priv=tp;
-+ tp->dev = dev;
-+
-+ SET_MODULE_OWNER(dev);
-+
-+ // spin_lock_init(&tp->lock);
-+ spin_lock_init(&gmac_fq_lock);
-+ dev->base_addr = tp->base_addr;
-+ dev->irq = tp->irq;
-+ dev->open = gmac_open;
-+ dev->stop = gmac_close;
-+ dev->hard_start_xmit = gmac_start_xmit;
-+ dev->get_stats = gmac_get_stats;
-+ dev->set_multicast_list = gmac_set_rx_mode;
-+ dev->set_mac_address = gmac_set_mac_address;
-+ dev->do_ioctl = gmac_netdev_ioctl;
-+ dev->tx_timeout = gmac_tx_timeout;
-+ dev->watchdog_timeo = GMAC_DEV_TX_TIMEOUT;
-+#ifdef L2_jumbo_frame
-+ dev->mtu = 2018; //2002 ,2018
-+#endif
-+ if (tp->port_id == 0)
-+ dev->tx_queue_len = TOE_GMAC0_SWTXQ_DESC_NUM;
-+ else
-+ dev->tx_queue_len = TOE_GMAC1_SWTXQ_DESC_NUM;
-+
-+#ifdef DO_HW_CHKSUM
-+ dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM;
-+#ifdef ENABLE_TSO
-+ dev->features |= NETIF_F_TSO;
-+#endif
-+#endif
-+#ifdef CONFIG_SL_NAPI
-+ dev->poll = gmac_rx_poll;
-+ dev->weight = 64;
-+#endif
-+
-+ if (register_netdev(dev))
-+ {
-+ gmac_cleanup_module();
-+ return(-1);
-+ }
-+ }
-+
-+
-+// FLAG_SWITCH = 0 ;
-+// FLAG_SWITCH = SPI_get_identifier();
-+// if(FLAG_SWITCH)
-+// {
-+// printk("Configure ADM699X...\n");
-+// SPI_default(); //Add by jason for ADM699X configuration
-+// }
-+ return (0);
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_cleanup_module
-+*----------------------------------------------------------------------*/
-+
-+static void gmac_cleanup_module(void)
-+{
-+ int i;
-+
-+#ifdef SL351x_GMAC_WORKAROUND
-+ del_timer(&gmac_workround_timer_obj);
-+#endif
-+
-+ for (i=0;i<CONFIG_MAC_NUM;i++)
-+ {
-+ if (toe_private_data.gmac[i].dev)
-+ {
-+ unregister_netdev(toe_private_data.gmac[i].dev);
-+ toe_private_data.gmac[i].dev = NULL;
-+ }
-+ }
-+ return ;
-+}
-+
-+module_init(gmac_init_module);
-+module_exit(gmac_cleanup_module);
-+
-+
-+/*----------------------------------------------------------------------
-+* gmac_read_reg
-+*----------------------------------------------------------------------*/
-+static inline unsigned int gmac_read_reg(unsigned int base, unsigned int offset)
-+//static unsigned int gmac_read_reg(unsigned int base, unsigned int offset)
-+{
-+ volatile unsigned int reg_val;
-+
-+ reg_val = readl(base + offset);
-+ return (reg_val);
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_write_reg
-+*----------------------------------------------------------------------*/
-+static inline void gmac_write_reg(unsigned int base, unsigned int offset,unsigned int data,unsigned int bit_mask)
-+//static void gmac_write_reg(unsigned int base, unsigned int offset,unsigned int data,unsigned int bit_mask)
-+{
-+ volatile unsigned int reg_val;
-+ unsigned int *addr;
-+
-+ reg_val = ( gmac_read_reg(base, offset) & (~bit_mask) ) | (data & bit_mask);
-+ addr = (unsigned int *)(base + offset);
-+ writel(reg_val,addr);
-+ return;
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_init_drv
-+*----------------------------------------------------------------------*/
-+void mac_init_drv(void)
-+{
-+ TOE_INFO_T *toe;
-+ int i;
-+ QUEUE_THRESHOLD_T threshold;
-+ u32 *destp;
-+ unsigned int chip_id,chip_version;
-+
-+ chip_id = readl(GMAC_GLOBAL_BASE_ADDR+0x0);
-+ chip_version = chip_id & 0x1 ;
-+
-+ if (!gmac_initialized)
-+ {
-+ gmac_initialized = 1;
-+
-+ // clear non TOE Queue Header Area
-+ destp = (u32 *)TOE_NONTOE_QUE_HDR_BASE;
-+ for (; destp < (u32 *)NONTOE_Q_HDR_AREA_END; destp++)
-+ *destp = 0x00;
-+
-+ // clear TOE Queue Header Area
-+ destp = (u32 *)TOE_TOE_QUE_HDR_BASE;
-+ for (; destp < (u32 *)TOE_Q_HDR_AREA_END; destp++)
-+ *destp = 0x00;
-+
-+ // init private data
-+ toe = (TOE_INFO_T *)&toe_private_data;
-+ memset((void *)toe, 0, sizeof(TOE_INFO_T));
-+ toe->gmac[0].base_addr = GMAC0_BASE;
-+ toe->gmac[1].base_addr = GMAC1_BASE;
-+ toe->gmac[0].dma_base_addr = TOE_GMAC0_DMA_BASE;
-+ toe->gmac[1].dma_base_addr = TOE_GMAC1_DMA_BASE;
-+ toe->gmac[0].auto_nego_cfg = 1;
-+ toe->gmac[1].auto_nego_cfg = 1;
-+#ifdef CONFIG_SL3516_ASIC
-+ toe->gmac[0].speed_cfg = GMAC_SPEED_1000;
-+ toe->gmac[1].speed_cfg = GMAC_SPEED_1000;
-+#else
-+ toe->gmac[0].speed_cfg = GMAC_SPEED_100;
-+ toe->gmac[1].speed_cfg = GMAC_SPEED_100;
-+#endif
-+ toe->gmac[0].full_duplex_cfg = 1;
-+ toe->gmac[1].full_duplex_cfg = 1;
-+#ifdef CONFIG_SL3516_ASIC
-+ toe->gmac[0].phy_mode = GMAC_PHY_RGMII_1000;
-+ toe->gmac[1].phy_mode = GMAC_PHY_RGMII_1000;
-+#else
-+ toe->gmac[0].phy_mode = GMAC_PHY_RGMII_100;
-+ toe->gmac[1].phy_mode = GMAC_PHY_RGMII_100;
-+#endif
-+ toe->gmac[0].port_id = GMAC_PORT0;
-+ toe->gmac[1].port_id = GMAC_PORT1;
-+ toe->gmac[0].phy_addr = 0x1;
-+ toe->gmac[1].phy_addr = 2;
-+// toe->gmac[0].irq = SL2312_INTERRUPT_GMAC0;
-+ toe->gmac[0].irq =1;
-+// toe->gmac[1].irq = SL2312_INTERRUPT_GMAC1;
-+ toe->gmac[1].irq =2;
-+ toe->gmac[0].mac_addr1 = &eth_mac[0][0];
-+ toe->gmac[1].mac_addr1 = &eth_mac[1][0];
-+
-+ for (i=0; i<CONFIG_MAC_NUM; i++)
-+ {
-+ unsigned int data, phy_vendor;
-+ gmac_write_reg(toe->gmac[i].base_addr, GMAC_STA_ADD2, 0x55aa55aa, 0xffffffff);
-+ data = gmac_read_reg(toe->gmac[i].base_addr, GMAC_STA_ADD2);
-+ if (data == 0x55aa55aa)
-+ {
-+#ifdef VITESSE_G5SWITCH
-+ if(Giga_switch && (i==1)){
-+ toe->gmac[i].existed = GMAC_EXISTED_FLAG;
-+ break;
-+ }
-+#endif
-+ phy_vendor = gmac_get_phy_vendor(toe->gmac[i].phy_addr);
-+ if (phy_vendor != 0 && phy_vendor != 0xffffffff)
-+ toe->gmac[i].existed = GMAC_EXISTED_FLAG;
-+ }
-+ }
-+
-+ // Write GLOBAL_QUEUE_THRESHOLD_REG
-+ threshold.bits32 = 0;
-+ threshold.bits.swfq_empty = (TOE_SW_FREEQ_DESC_NUM > 256) ? 255 :
-+ TOE_SW_FREEQ_DESC_NUM/2;
-+ threshold.bits.hwfq_empty = (TOE_HW_FREEQ_DESC_NUM > 256) ? 256/4 :
-+ TOE_HW_FREEQ_DESC_NUM/4;
-+ threshold.bits.toe_class = (TOE_TOE_DESC_NUM > 256) ? 256/4 :
-+ TOE_TOE_DESC_NUM/4;
-+ threshold.bits.intrq = (TOE_INTR_DESC_NUM > 256) ? 256/4 :
-+ TOE_INTR_DESC_NUM/4;
-+ writel(threshold.bits32, TOE_GLOBAL_BASE + GLOBAL_QUEUE_THRESHOLD_REG);
-+
-+ FLAG_SWITCH = 0;
-+ toe_gmac_sw_reset();
-+ toe_init_free_queue();
-+ toe_init_swtx_queue();
-+#ifdef CONFIG_SL351x_NAT
-+ toe_init_hwtx_queue();
-+#endif
-+ toe_init_default_queue();
-+#ifdef CONFIG_SL351x_RXTOE
-+ toe_init_interrupt_queue();
-+#endif
-+ toe_init_interrupt_config();
-+
-+#if defined(CONFIG_SL351x_NAT) || defined(CONFIG_SL351x_RXTOE)
-+ sl351x_hash_init();
-+#else
-+ {
-+ volatile u32 *dp1, *dp2, dword;
-+
-+ dp1 = (volatile u32 *) TOE_V_BIT_BASE;
-+ dp2 = (volatile u32 *) TOE_A_BIT_BASE;
-+
-+ for (i=0; i<HASH_TOTAL_ENTRIES/32; i++)
-+ {
-+ *dp1++ = 0;
-+ dword = *dp2++; // read-clear
-+ }
-+ }
-+#endif
-+ }
-+
-+#ifdef SL351x_GMAC_WORKAROUND
-+#ifdef CONFIG_SL351x_NAT
-+ sl351x_nat_workaround_init();
-+#endif
-+ init_timer(&gmac_workround_timer_obj);
-+ if (chip_version == 1)
-+ {
-+ gmac_workround_timer_obj.expires = jiffies * 50;
-+ }
-+ else
-+ {
-+ gmac_workround_timer_obj.expires = jiffies + 2;
-+ }
-+ gmac_workround_timer_obj.data = (unsigned long)&gmac_workround_timer_obj;
-+ gmac_workround_timer_obj.function = (void *)&sl351x_poll_gmac_hanged_status;
-+ add_timer(&gmac_workround_timer_obj);
-+#endif
-+}
-+
-+/*----------------------------------------------------------------------
-+* toe_init_free_queue
-+* (1) Initialize the Free Queue Descriptor Base Address & size
-+* Register: TOE_GLOBAL_BASE + 0x0004
-+* (2) Initialize DMA Read/Write pointer for
-+* SW Free Queue and HW Free Queue
-+* (3) Initialize DMA Descriptors for
-+* SW Free Queue and HW Free Queue,
-+*----------------------------------------------------------------------*/
-+static void toe_init_free_queue(void)
-+{
-+ int i;
-+ TOE_INFO_T *toe;
-+ DMA_RWPTR_T rwptr_reg;
-+// unsigned int rwptr_addr;
-+ unsigned int desc_buf;
-+ GMAC_RXDESC_T *sw_desc_ptr;
-+ struct sk_buff *skb;
-+#ifdef CONFIG_SL351x_NAT
-+ GMAC_RXDESC_T *desc_ptr;
-+ unsigned int buf_ptr;
-+#endif
-+
-+ toe = (TOE_INFO_T *)&toe_private_data;
-+ desc_buf = (unsigned int)DMA_MALLOC((TOE_SW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T)),
-+ (dma_addr_t *)&toe->sw_freeq_desc_base_dma) ;
-+ sw_desc_ptr = (GMAC_RXDESC_T *)desc_buf;
-+ if (!desc_buf)
-+ {
-+ printk("%s::DMA_MALLOC fail !\n",__func__);
-+ return;
-+ }
-+ memset((void *)desc_buf, 0, TOE_SW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T));
-+
-+ // DMA Queue Base & Size
-+ writel((toe->sw_freeq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_SW_FREEQ_DESC_POWER,
-+ TOE_GLOBAL_BASE + GLOBAL_SW_FREEQ_BASE_SIZE_REG);
-+
-+ // init descriptor base
-+ toe->swfq_desc_base = desc_buf;
-+
-+ // SW Free Queue Read/Write Pointer
-+ rwptr_reg.bits.wptr = TOE_SW_FREEQ_DESC_NUM - 1;
-+ rwptr_reg.bits.rptr = 0;
-+ toe->fq_rx_rwptr.bits32 = rwptr_reg.bits32;
-+ writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+
-+ // SW Free Queue Descriptors
-+ for (i=0; i<TOE_SW_FREEQ_DESC_NUM; i++)
-+ {
-+ sw_desc_ptr->word0.bits.buffer_size = SW_RX_BUF_SIZE;
-+ sw_desc_ptr->word1.bits.sw_id = i; // used to locate skb
-+ if ( (skb = dev_alloc_skb(SW_RX_BUF_SIZE))==NULL) /* allocate socket buffer */
-+ {
-+ printk("%s::skb buffer allocation fail !\n",__func__); while(1);
-+ }
-+ REG32(skb->data) = (unsigned int)skb;
-+ skb_reserve(skb, SKB_RESERVE_BYTES);
-+ // toe->rx_skb[i] = skb;
-+ sw_desc_ptr->word2.buf_adr = (unsigned int)__pa(skb->data);
-+// consistent_sync((unsigned int)desc_ptr, sizeof(GMAC_RXDESC_T), PCI_DMA_TODEVICE);
-+ sw_desc_ptr++;
-+ }
-+
-+#ifdef CONFIG_SL351x_NAT
-+ if (sizeof(skb->cb) < 64)
-+ {
-+ printk("==> %s:: sk structure is incorrect -->Change to cb[64] !\n",__func__); while(1);
-+ }
-+ // init hardware free queues
-+ desc_buf = (unsigned int)DMA_MALLOC((TOE_HW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T)),
-+ (dma_addr_t *)&toe->hw_freeq_desc_base_dma) ;
-+ desc_ptr = (GMAC_RXDESC_T *)desc_buf;
-+ if (!desc_buf)
-+ {
-+ printk("%s::DMA_MALLOC fail !\n",__func__);
-+ return;
-+ }
-+ memset((void *)desc_buf, 0, TOE_HW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T));
-+
-+ // DMA Queue Base & Size
-+ writel((toe->hw_freeq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_HW_FREEQ_DESC_POWER,
-+ TOE_GLOBAL_BASE + GLOBAL_HW_FREEQ_BASE_SIZE_REG);
-+
-+ // init descriptor base
-+ toe->hwfq_desc_base = desc_buf;
-+
-+ // HW Free Queue Read/Write Pointer
-+ rwptr_reg.bits.wptr = TOE_HW_FREEQ_DESC_NUM - 1;
-+ rwptr_reg.bits.rptr = 0;
-+ writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
-+#ifndef HW_RXBUF_BY_KMALLOC
-+ buf_ptr = (unsigned int)DMA_MALLOC(TOE_HW_FREEQ_DESC_NUM * HW_RX_BUF_SIZE,
-+ (dma_addr_t *)&toe->hwfq_buf_base_dma);
-+#else
-+ buf_ptr = (unsigned int)kmalloc(TOE_HW_FREEQ_DESC_NUM * HW_RX_BUF_SIZE, GFP_KERNEL);
-+ toe->hwfq_buf_base_dma = __pa(buf_ptr);
-+#endif
-+ if (!buf_ptr)
-+ {
-+ printk("===> %s::Failed to allocate HW TxQ Buffers!\n",__func__);
-+ while(1); // could not be happened, if happened, adjust the buffer descriptor number
-+ return;
-+ }
-+
-+ toe->hwfq_buf_base = buf_ptr;
-+ toe->hwfq_buf_end_dma = toe->hwfq_buf_base_dma + (TOE_HW_FREEQ_DESC_NUM * HW_RX_BUF_SIZE);
-+ buf_ptr = (unsigned int)toe->hwfq_buf_base_dma;
-+ for (i=0; i<TOE_HW_FREEQ_DESC_NUM; i++)
-+ {
-+ desc_ptr->word0.bits.buffer_size = HW_RX_BUF_SIZE;
-+ desc_ptr->word1.bits.sw_id = i;
-+ desc_ptr->word2.buf_adr = (unsigned int)buf_ptr;
-+// consistent_sync((unsigned int)desc_ptr, sizeof(GMAC_RXDESC_T), PCI_DMA_TODEVICE);
-+ // consistent_sync((unsigned int)buf_ptr, HW_RX_BUF_SIZE, PCI_DMA_TODEVICE);
-+ desc_ptr++;
-+ buf_ptr += HW_RX_BUF_SIZE;
-+ }
-+#else
-+ // DMA Queue Base & Size
-+ writel((0) | TOE_SW_FREEQ_DESC_POWER,
-+ TOE_GLOBAL_BASE + GLOBAL_HW_FREEQ_BASE_SIZE_REG);
-+ rwptr_reg.bits.wptr = TOE_HW_FREEQ_DESC_NUM - 1;
-+ rwptr_reg.bits.rptr = 0;
-+ writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
-+
-+#endif
-+}
-+/*----------------------------------------------------------------------
-+* toe_init_swtx_queue
-+* (2) Initialize the GMAC 0/1 SW TXQ Queue Descriptor Base Address & sizeup
-+* GMAC_SW_TX_QUEUE_BASE_REG(0x0050)
-+* (2) Initialize DMA Read/Write pointer for
-+* GMAC 0/1 SW TX Q0-5
-+*----------------------------------------------------------------------*/
-+static void toe_init_swtx_queue(void)
-+{
-+ int i;
-+ TOE_INFO_T *toe;
-+ DMA_RWPTR_T rwptr_reg;
-+ unsigned int rwptr_addr;
-+ unsigned int desc_buf;
-+
-+
-+ toe = (TOE_INFO_T *)&toe_private_data;
-+
-+ // GMAC-0, SW-TXQ
-+ // The GMAC-0 and GMAC-0 maybe have different descriptor number
-+ // so, not use for instruction
-+ desc_buf = (unsigned int)DMA_MALLOC((TOE_GMAC0_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T)),
-+ (dma_addr_t *)&toe->gmac[0].swtxq_desc_base_dma) ;
-+ toe->gmac[0].swtxq_desc_base = desc_buf;
-+ if (!desc_buf)
-+ {
-+ printk("%s::DMA_MALLOC fail !\n",__func__);
-+ return ;
-+ }
-+ memset((void *)desc_buf, 0, TOE_GMAC0_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T));
-+ writel((toe->gmac[0].swtxq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_GMAC0_SWTXQ_DESC_POWER,
-+ TOE_GMAC0_DMA_BASE+ GMAC_SW_TX_QUEUE_BASE_REG);
-+
-+ // GMAC0 SW TX Q0-Q5
-+ rwptr_reg.bits.wptr = 0;
-+ rwptr_reg.bits.rptr = 0;
-+ rwptr_addr = TOE_GMAC0_DMA_BASE + GMAC_SW_TX_QUEUE0_PTR_REG;
-+ for (i=0; i<TOE_SW_TXQ_NUM; i++)
-+ {
-+ toe->gmac[0].swtxq[i].rwptr_reg = rwptr_addr;
-+ toe->gmac[0].swtxq[i].desc_base = desc_buf;
-+ toe->gmac[0].swtxq[i].total_desc_num = TOE_GMAC0_SWTXQ_DESC_NUM;
-+ desc_buf += TOE_GMAC0_SWTXQ_DESC_NUM * sizeof(GMAC_TXDESC_T);
-+ writel(rwptr_reg.bits32, rwptr_addr);
-+ rwptr_addr+=4;
-+ }
-+
-+ // GMAC-1, SW-TXQ
-+ desc_buf = (unsigned int)DMA_MALLOC((TOE_GMAC1_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T)),
-+ (dma_addr_t *)&toe->gmac[1].swtxq_desc_base_dma) ;
-+ toe->gmac[1].swtxq_desc_base = desc_buf;
-+ if (!desc_buf)
-+ {
-+ printk("%s::DMA_MALLOC fail !\n",__func__);
-+ return ;
-+ }
-+ memset((void *)desc_buf, 0, TOE_GMAC1_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T));
-+ writel((toe->gmac[1].swtxq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_GMAC1_SWTXQ_DESC_POWER,
-+ TOE_GMAC1_DMA_BASE+ GMAC_SW_TX_QUEUE_BASE_REG);
-+
-+
-+ // GMAC1 SW TX Q0-Q5
-+ rwptr_reg.bits.wptr = 0;
-+ rwptr_reg.bits.rptr = 0;
-+ rwptr_addr = TOE_GMAC1_DMA_BASE + GMAC_SW_TX_QUEUE0_PTR_REG;
-+ for (i=0; i<TOE_SW_TXQ_NUM; i++)
-+ {
-+ toe->gmac[1].swtxq[i].rwptr_reg = rwptr_addr;
-+ toe->gmac[1].swtxq[i].desc_base = desc_buf;
-+ toe->gmac[1].swtxq[i].total_desc_num = TOE_GMAC1_SWTXQ_DESC_NUM;
-+ desc_buf += TOE_GMAC1_SWTXQ_DESC_NUM * sizeof(GMAC_TXDESC_T);
-+ writel(rwptr_reg.bits32, rwptr_addr);
-+ rwptr_addr+=4;
-+ }
-+}
-+
-+/*----------------------------------------------------------------------
-+* toe_init_hwtx_queue
-+* (2) Initialize the GMAC 0/1 HW TXQ Queue Descriptor Base Address & size
-+* GMAC_HW_TX_QUEUE_BASE_REG(0x0054)
-+* (2) Initialize DMA Read/Write pointer for
-+* GMAC 0/1 HW TX Q0-5
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_NAT
-+static void toe_init_hwtx_queue(void)
-+{
-+ int i;
-+ TOE_INFO_T *toe;
-+ DMA_RWPTR_T rwptr_reg;
-+ unsigned int rwptr_addr;
-+ unsigned int desc_buf;
-+
-+ toe = (TOE_INFO_T *)&toe_private_data;
-+ // GMAC-0, HW-TXQ
-+ // The GMAC-0 and GMAC-0 maybe have different descriptor number
-+ // so, not use for instruction
-+ desc_buf = (unsigned int)DMA_MALLOC((TOE_GMAC0_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T)),
-+ (dma_addr_t *)&toe->gmac[0].hwtxq_desc_base_dma) ;
-+ toe->gmac[0].hwtxq_desc_base = desc_buf;
-+ if (!desc_buf)
-+ {
-+ printk("%s::DMA_MALLOC fail !\n",__func__);
-+ return ;
-+ }
-+ memset((void *)desc_buf, 0, TOE_GMAC0_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T));
-+ writel((toe->gmac[0].hwtxq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_GMAC0_HWTXQ_DESC_POWER,
-+ TOE_GMAC0_DMA_BASE+ GMAC_HW_TX_QUEUE_BASE_REG);
-+
-+ // GMAC0 HW TX Q0-Q5
-+ rwptr_reg.bits.wptr = 0;
-+ rwptr_reg.bits.rptr = 0;
-+ rwptr_addr = TOE_GMAC0_DMA_BASE + GMAC_HW_TX_QUEUE0_PTR_REG;
-+ for (i=0; i<TOE_HW_TXQ_NUM; i++)
-+ {
-+ toe->gmac[0].hwtxq[i].desc_base = desc_buf;
-+ desc_buf += TOE_GMAC0_HWTXQ_DESC_NUM * sizeof(GMAC_TXDESC_T);
-+ writel(rwptr_reg.bits32, rwptr_addr);
-+ rwptr_addr+=4;
-+ }
-+
-+ // GMAC-1, HW-TXQ
-+ desc_buf = (unsigned int)DMA_MALLOC((TOE_GMAC1_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T)),
-+ (dma_addr_t *)&toe->gmac[1].hwtxq_desc_base_dma) ;
-+ toe->gmac[1].hwtxq_desc_base = desc_buf;
-+ if (!desc_buf)
-+ {
-+ printk("%s::DMA_MALLOC fail !\n",__func__);
-+ return ;
-+ }
-+ memset((void *)desc_buf, 0, TOE_GMAC1_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T));
-+ writel((toe->gmac[1].hwtxq_desc_base_dma & DMA_Q_BASE_MASK) | TOE_GMAC1_HWTXQ_DESC_POWER,
-+ TOE_GMAC1_DMA_BASE+ GMAC_HW_TX_QUEUE_BASE_REG);
-+
-+ // GMAC1 HW TX Q0-Q5
-+ rwptr_reg.bits.wptr = 0;
-+ rwptr_reg.bits.rptr = 0;
-+ rwptr_addr = TOE_GMAC1_DMA_BASE + GMAC_HW_TX_QUEUE0_PTR_REG;
-+ for (i=0; i<TOE_HW_TXQ_NUM; i++)
-+ {
-+ toe->gmac[1].hwtxq[i].desc_base = desc_buf;
-+ desc_buf += TOE_GMAC1_HWTXQ_DESC_NUM * sizeof(GMAC_TXDESC_T);
-+ writel(rwptr_reg.bits32, rwptr_addr);
-+ rwptr_addr+=4;
-+ }
-+}
-+#endif
-+
-+/*----------------------------------------------------------------------
-+* toe_init_default_queue
-+* (1) Initialize the default 0/1 Queue Header
-+* Register: TOE_DEFAULT_Q0_HDR_BASE (0x60002000)
-+* TOE_DEFAULT_Q1_HDR_BASE (0x60002008)
-+* (2) Initialize Descriptors of Default Queue 0/1
-+*----------------------------------------------------------------------*/
-+static void toe_init_default_queue(void)
-+{
-+ TOE_INFO_T *toe;
-+ volatile NONTOE_QHDR_T *qhdr;
-+ GMAC_RXDESC_T *desc_ptr;
-+ DMA_SKB_SIZE_T skb_size;
-+
-+ toe = (TOE_INFO_T *)&toe_private_data;
-+ desc_ptr = (GMAC_RXDESC_T *)DMA_MALLOC((TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_RXDESC_T)),
-+ (dma_addr_t *)&toe->gmac[0].default_desc_base_dma);
-+ if (!desc_ptr)
-+ {
-+ printk("%s::DMA_MALLOC fail !\n",__func__);
-+ return ;
-+ }
-+ memset((void *)desc_ptr, 0, TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_RXDESC_T));
-+ toe->gmac[0].default_desc_base = (unsigned int)desc_ptr;
-+ toe->gmac[0].default_desc_num = TOE_DEFAULT_Q0_DESC_NUM;
-+ qhdr = (volatile NONTOE_QHDR_T *)TOE_DEFAULT_Q0_HDR_BASE;
-+ qhdr->word0.base_size = ((unsigned int)toe->gmac[0].default_desc_base_dma & NONTOE_QHDR0_BASE_MASK) | TOE_DEFAULT_Q0_DESC_POWER;
-+ qhdr->word1.bits32 = 0;
-+ toe->gmac[0].rx_rwptr.bits32 = 0;
-+ toe->gmac[0].default_qhdr = (NONTOE_QHDR_T *)qhdr;
-+ desc_ptr = (GMAC_RXDESC_T *)DMA_MALLOC((TOE_DEFAULT_Q1_DESC_NUM * sizeof(GMAC_RXDESC_T)),
-+ (dma_addr_t *)&toe->gmac[1].default_desc_base_dma);
-+ if (!desc_ptr)
-+ {
-+ printk("%s::DMA_MALLOC fail !\n",__func__);
-+ return ;
-+ }
-+ memset((void *)desc_ptr, 0, TOE_DEFAULT_Q1_DESC_NUM * sizeof(GMAC_RXDESC_T));
-+ toe->gmac[1].default_desc_base = (unsigned int)desc_ptr;
-+ toe->gmac[1].default_desc_num = TOE_DEFAULT_Q1_DESC_NUM;
-+ qhdr = (volatile NONTOE_QHDR_T *)TOE_DEFAULT_Q1_HDR_BASE;
-+ qhdr->word0.base_size = ((unsigned int)toe->gmac[1].default_desc_base_dma & NONTOE_QHDR0_BASE_MASK) | TOE_DEFAULT_Q1_DESC_POWER;
-+ qhdr->word1.bits32 = 0;
-+ toe->gmac[1].rx_rwptr.bits32 = 0;
-+ toe->gmac[1].default_qhdr = (NONTOE_QHDR_T *)qhdr;
-+
-+ skb_size.bits.hw_skb_size = HW_RX_BUF_SIZE;
-+ skb_size.bits.sw_skb_size = SW_RX_BUF_SIZE;
-+ writel(skb_size.bits32, TOE_GLOBAL_BASE + GLOBAL_DMA_SKB_SIZE_REG);
-+}
-+
-+/*----------------------------------------------------------------------
-+* toe_init_interrupt_queue
-+* (1) Initialize the Interrupt Queue Header
-+* Register: TOE_INTR_Q_HDR_BASE (0x60002080)
-+* (2) Initialize Descriptors of Interrupt Queues
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_RXTOE
-+static void toe_init_interrupt_queue(void)
-+{
-+ TOE_INFO_T *toe;
-+ volatile NONTOE_QHDR_T *qhdr;
-+ INTR_QHDR_T *desc_ptr;
-+ // unsigned int desc_buf_addr;
-+ int i;
-+
-+ toe = (TOE_INFO_T *)&toe_private_data;
-+ desc_ptr = (INTR_QHDR_T *)DMA_MALLOC((TOE_INTR_QUEUE_NUM * TOE_INTR_DESC_NUM * sizeof(INTR_QHDR_T)),
-+ (dma_addr_t *)&toe->intr_desc_base_dma);
-+ if (!desc_ptr)
-+ {
-+ printk("%s::DMA_MALLOC interrupt queue fail !\n",__func__);
-+ return ;
-+ }
-+ /*
-+ desc_buf_addr = (unsigned int)DMA_MALLOC((TOE_INTR_DESC_NUM * sizeof(TOE_QHDR_T)),
-+ (dma_addr_t *)&toe->intr_buf_base_dma);
-+ if (!desc_buf_addr)
-+ {
-+ printk("%s::DMA_MALLOC interrupt desc fail !\n",__func__);
-+ return ;
-+ }*/
-+ printk("#### %s::Intr Q desc %x\n", __func__, (u32)desc_ptr);
-+
-+ memset((void *)desc_ptr, 0, TOE_INTR_QUEUE_NUM * TOE_INTR_DESC_NUM * sizeof(INTR_QHDR_T));
-+// memset((void *)desc_buf_addr, 0, TOE_INTR_DESC_NUM * sizeof(TOE_QHDR_T));
-+ toe->intr_desc_base = (unsigned int)desc_ptr;
-+ toe->intr_desc_num = TOE_INTR_DESC_NUM;
-+
-+ qhdr = (volatile NONTOE_QHDR_T *)TOE_INTR_Q_HDR_BASE;
-+// intrq = (INTRQ_INFO_T*) &toe->intrq[0];
-+ for (i=0; i<TOE_INTR_QUEUE_NUM; i++, qhdr++)
-+ {
-+ qhdr->word0.base_size = ((unsigned int)toe->intr_desc_base_dma & NONTOE_QHDR0_BASE_MASK) | TOE_INTR_DESC_POWER;
-+ qhdr->word1.bits32 = 0;
-+ desc_ptr += TOE_INTR_DESC_NUM;
-+ }
-+}
-+
-+#endif
-+
-+/*----------------------------------------------------------------------
-+* toe_init_interrupt_config
-+* Interrupt Select Registers are used to map interrupt to int0 or int1
-+* Int0 and int1 are wired to CPU 0/1 GMAC 0/1
-+* Interrupt Device Inteface data are used to pass device info to
-+* upper device deiver or store status/statistics
-+* ISR handler
-+* (1) If status bit ON but masked, the prinf error message (bug issue)
-+* (2) If select bits are for me, handle it, else skip to let
-+* the other ISR handles it.
-+* Notes:
-+* GMACx init routine (for eCOS) or open routine (for Linux)
-+* enable the interrupt bits only which are selected for him.
-+*
-+* Default Setting:
-+* GMAC0 intr bits ------> int0 ----> eth0
-+* GMAC1 intr bits ------> int1 ----> eth1
-+* TOE intr -------------> int0 ----> eth0
-+* Classification Intr --> int0 ----> eth0
-+* Default Q0 -----------> int0 ----> eth0
-+* Default Q1 -----------> int1 ----> eth1
-+*----------------------------------------------------------------------*/
-+static void toe_init_interrupt_config(void)
-+{
-+ // clear all status bits
-+ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
-+ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
-+ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
-+ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
-+ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+
-+ // Init select registers
-+ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
-+ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG);
-+ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG);
-+ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
-+ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+
-+ // disable all interrupt
-+ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_0_REG);
-+ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_2_REG);
-+ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_3_REG);
-+ writel(0, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+}
-+
-+/*----------------------------------------------------------------------
-+* toe_init_gmac
-+*----------------------------------------------------------------------*/
-+static void toe_init_gmac(struct net_device *dev)
-+{
-+ GMAC_INFO_T *tp = dev->priv;
-+ TOE_INFO_T *toe;
-+ u32 data;
-+
-+ if (!gmac_initialized)
-+ return ;
-+
-+ if (!tp->existed)
-+ return;
-+
-+ tp->dev = dev;
-+ tp->flow_control_enable = 1;
-+ tp->pre_phy_status = LINK_DOWN;
-+ tp->full_duplex_status = tp->full_duplex_cfg;
-+ tp->speed_status = tp->speed_status;
-+
-+#if 0
-+ /* get mac address from FLASH */
-+ gmac_get_mac_address();
-+#endif
-+
-+ /* set PHY register to start autonegition process */
-+ gmac_set_phy_status(dev);
-+
-+ /* GMAC initialization */
-+ if ( toe_gmac_init_chip(dev) )
-+ {
-+ printk ("GMAC %d init fail\n", tp->port_id);
-+ }
-+
-+ /* clear statistic counter */
-+ toe_gmac_clear_counter(dev);
-+
-+ memset((void *)&tp->ifStatics, 0, sizeof(struct net_device_stats));
-+
-+ /* -----------------------------------------------------------
-+ Enable GMAC interrupt & disable loopback
-+ Notes:
-+ GMACx init routine (for eCOS) or open routine (for Linux)
-+ enable the interrupt bits only which are selected for him.
-+ --------------------------------------------------------------*/
-+ toe = (TOE_INFO_T *)&toe_private_data;
-+
-+ // Enable Interrupt Bits
-+ if (tp->port_id == 0)
-+ {
-+ tp->intr0_selected = GMAC0_TXDERR_INT_BIT | GMAC0_TXPERR_INT_BIT |
-+ GMAC0_RXDERR_INT_BIT | GMAC0_RXPERR_INT_BIT |
-+ GMAC0_SWTQ05_FIN_INT_BIT | GMAC0_SWTQ05_EOF_INT_BIT |
-+ GMAC0_SWTQ04_FIN_INT_BIT | GMAC0_SWTQ04_EOF_INT_BIT |
-+ GMAC0_SWTQ03_FIN_INT_BIT | GMAC0_SWTQ03_EOF_INT_BIT |
-+ GMAC0_SWTQ02_FIN_INT_BIT | GMAC0_SWTQ02_EOF_INT_BIT |
-+ GMAC0_SWTQ01_FIN_INT_BIT | GMAC0_SWTQ01_EOF_INT_BIT |
-+ GMAC0_SWTQ00_FIN_INT_BIT | GMAC0_SWTQ00_EOF_INT_BIT;
-+
-+#ifdef GMAX_TX_INTR_DISABLED
-+ tp->intr0_enabled = 0;
-+#else
-+ tp->intr0_enabled = GMAC0_SWTQ00_FIN_INT_BIT | GMAC0_SWTQ00_EOF_INT_BIT;
-+#endif
-+
-+ tp->intr1_selected = TOE_IQ_ALL_BITS | TOE_CLASS_RX_INT_BITS |
-+ GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT |
-+ GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT |
-+ DEFAULT_Q0_INT_BIT;
-+ tp->intr1_enabled = DEFAULT_Q0_INT_BIT | TOE_IQ_ALL_BITS;
-+ tp->intr2_selected = 0xffffffff; // TOE Queue 32-63 FUUL Intr
-+ tp->intr2_enabled = 0xffffffff;
-+ tp->intr3_selected = 0xffffffff; // TOE Queue 0-31 FUUL Intr
-+ tp->intr3_enabled = 0xffffffff;
-+ tp->intr4_selected = GMAC0_INT_BITS | CLASS_RX_FULL_INT_BITS |
-+ HWFQ_EMPTY_INT_BIT | SWFQ_EMPTY_INT_BIT;
-+ tp->intr4_enabled = GMAC0_INT_BITS | SWFQ_EMPTY_INT_BIT;
-+
-+ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) & ~tp->intr0_selected;
-+ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
-+ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG) & ~tp->intr1_selected;
-+ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG);
-+ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG) & ~tp->intr2_selected;
-+ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG);
-+ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG) & ~tp->intr3_selected;
-+ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
-+ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG) & ~tp->intr4_selected;
-+ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+ }
-+ else
-+ {
-+ tp->intr0_selected = GMAC1_TXDERR_INT_BIT | GMAC1_TXPERR_INT_BIT |
-+ GMAC1_RXDERR_INT_BIT | GMAC1_RXPERR_INT_BIT |
-+ GMAC1_SWTQ15_FIN_INT_BIT | GMAC1_SWTQ15_EOF_INT_BIT |
-+ GMAC1_SWTQ14_FIN_INT_BIT | GMAC1_SWTQ14_EOF_INT_BIT |
-+ GMAC1_SWTQ13_FIN_INT_BIT | GMAC1_SWTQ13_EOF_INT_BIT |
-+ GMAC1_SWTQ12_FIN_INT_BIT | GMAC1_SWTQ12_EOF_INT_BIT |
-+ GMAC1_SWTQ11_FIN_INT_BIT | GMAC1_SWTQ11_EOF_INT_BIT |
-+ GMAC1_SWTQ10_FIN_INT_BIT | GMAC1_SWTQ10_EOF_INT_BIT;
-+#ifdef GMAX_TX_INTR_DISABLED
-+ tp->intr0_enabled = 0;
-+#else
-+ tp->intr0_enabled = GMAC1_SWTQ10_FIN_INT_BIT | GMAC1_SWTQ10_EOF_INT_BIT;
-+#endif
-+
-+ tp->intr1_selected = DEFAULT_Q1_INT_BIT;
-+ tp->intr1_enabled = DEFAULT_Q1_INT_BIT | TOE_IQ_ALL_BITS;
-+ tp->intr2_selected = 0; // TOE Queue 32-63 FUUL Intr
-+ tp->intr2_enabled = 0;
-+ tp->intr3_selected = 0; // TOE Queue 0-31 FUUL Intr
-+ tp->intr3_enabled = 0;
-+ tp->intr4_selected = GMAC1_INT_BITS;
-+ tp->intr4_enabled = GMAC1_INT_BITS;
-+
-+ if (toe->gmac[0].existed != GMAC_EXISTED_FLAG)
-+ {
-+ tp->intr1_selected |= TOE_IQ_ALL_BITS | TOE_CLASS_RX_INT_BITS |
-+ GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT |
-+ GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT;
-+ tp->intr1_enabled |= TOE_IQ_ALL_BITS;
-+ tp->intr2_selected |= 0xffffffff; // TOE Queue 32-63 FUUL Intr
-+ tp->intr2_enabled |= 0xffffffff;
-+ tp->intr3_selected |= 0xffffffff; // TOE Queue 0-31 FUUL Intr
-+ tp->intr3_enabled |= 0xffffffff;
-+ tp->intr4_selected |= CLASS_RX_FULL_INT_BITS |
-+ HWFQ_EMPTY_INT_BIT | SWFQ_EMPTY_INT_BIT;
-+ tp->intr4_enabled |= SWFQ_EMPTY_INT_BIT;
-+ }
-+ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) | tp->intr0_selected;
-+ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
-+ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG) | tp->intr1_selected;
-+ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG);
-+ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG) | tp->intr2_selected;
-+ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG);
-+ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG) | tp->intr3_selected;
-+ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
-+ data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG) | tp->intr4_selected;
-+ writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+ }
-+
-+ // enable only selected bits
-+ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_0_REG,
-+ tp->intr0_enabled, tp->intr0_selected);
-+ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_1_REG,
-+ tp->intr1_enabled, tp->intr1_selected);
-+ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_2_REG,
-+ tp->intr2_enabled, tp->intr2_selected);
-+ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_3_REG,
-+ tp->intr3_enabled, tp->intr3_selected);
-+ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
-+ tp->intr4_enabled, tp->intr4_selected);
-+
-+ /* start DMA process */
-+ toe_gmac_hw_start(dev);
-+
-+ /* enable tx/rx register */
-+ toe_gmac_enable_tx_rx(dev);
-+
-+// toe_gmac_enable_interrupt(tp->irq);
-+
-+ return ;
-+}
-+
-+
-+/*----------------------------------------------------------------------
-+* toe_gmac_sw_reset
-+*----------------------------------------------------------------------*/
-+static void toe_gmac_sw_reset(void)
-+{
-+ unsigned int reg_val;
-+ reg_val = readl(GMAC_GLOBAL_BASE_ADDR+GLOBAL_RESET_REG) | 0x00000060; /* GMAC0 S/W reset */
-+ writel(reg_val,GMAC_GLOBAL_BASE_ADDR+GLOBAL_RESET_REG);
-+ udelay(100);
-+ return;
-+}
-+
-+/*----------------------------------------------------------------------
-+* toe_gmac_init_chip
-+*----------------------------------------------------------------------*/
-+static int toe_gmac_init_chip(struct net_device *dev)
-+{
-+ GMAC_INFO_T *tp = dev->priv;
-+ GMAC_CONFIG2_T config2_val;
-+ GMAC_CONFIG0_T config0,config0_mask;
-+ GMAC_CONFIG1_T config1;
-+ #ifdef CONFIG_SL351x_NAT
-+ GMAC_CONFIG3_T config3_val;
-+ #endif
-+ GMAC_TX_WCR0_T hw_weigh;
-+ GMAC_TX_WCR1_T sw_weigh;
-+// GMAC_HASH_ENABLE_REG0_T hash_ctrl;
-+//
-+#if 0 /* mac address will be set in late_initcall */
-+ struct sockaddr sock;
-+ // GMAC_AHB_WEIGHT_T ahb_weight, ahb_weight_mask;
-+
-+
-+ /* set station MAC address1 and address2 */
-+ memcpy(&sock.sa_data[0],&eth_mac[tp->port_id][0],6);
-+ gmac_set_mac_address(dev,(void *)&sock);
-+#endif
-+
-+ /* set RX_FLTR register to receive all multicast packet */
-+ gmac_write_reg(tp->base_addr, GMAC_RX_FLTR, 0x00000007,0x0000001f);
-+ // gmac_write_reg(tp->base_addr, GMAC_RX_FLTR, 0x00000007,0x0000001f);
-+ //gmac_write_reg(tp->base_addr, GMAC_RX_FLTR,0x00000007,0x0000001f);
-+
-+ /* set per packet buffer size */
-+ // config1.bits32 = 0x002004; //next version
-+ /* set flow control threshold */
-+ config1.bits32 = 0;
-+ config1.bits.set_threshold = 32 / 2;
-+ config1.bits.rel_threshold = 32 / 4 * 3;
-+ gmac_write_reg(tp->base_addr, GMAC_CONFIG1, config1.bits32, 0xffffffff);
-+
-+ /* set flow control threshold */
-+ config2_val.bits32 = 0;
-+ config2_val.bits.set_threshold = TOE_SW_FREEQ_DESC_NUM/2;
-+ config2_val.bits.rel_threshold = TOE_SW_FREEQ_DESC_NUM*3/4;
-+ gmac_write_reg(tp->base_addr, GMAC_CONFIG2, config2_val.bits32,0xffffffff);
-+
-+ #ifdef CONFIG_SL351x_NAT
-+ /* set HW free queue flow control threshold */
-+ config3_val.bits32 = 0;
-+ config3_val.bits.set_threshold = PAUSE_SET_HW_FREEQ;
-+ config3_val.bits.rel_threshold = PAUSE_REL_HW_FREEQ;
-+ gmac_write_reg(tp->base_addr, GMAC_CONFIG3, config3_val.bits32,0xffffffff);
-+ #endif
-+ /* set_mcast_filter mask*/
-+ // gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL0,0x0,0xffffffff);
-+ // gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL1,0x0,0xffffffff);
-+
-+ /* disable TX/RX and disable internal loop back */
-+ config0.bits32 = 0;
-+ config0_mask.bits32 = 0;
-+
-+ //debug_Aaron
-+#ifdef L2_jumbo_frame
-+ config0.bits.max_len = 5;
-+#else
-+ config0.bits.max_len = 2;
-+#endif
-+
-+ if (tp->flow_control_enable==1)
-+ {
-+ config0.bits.tx_fc_en = 1; /* enable tx flow control */
-+ config0.bits.rx_fc_en = 1; /* enable rx flow control */
-+ printk("Enable MAC Flow Control...\n");
-+ }
-+ else
-+ {
-+ config0.bits.tx_fc_en = 0; /* disable tx flow control */
-+ config0.bits.rx_fc_en = 0; /* disable rx flow control */
-+ printk("Disable MAC Flow Control...\n");
-+ }
-+ config0.bits.dis_rx = 1; /* disable rx */
-+ config0.bits.dis_tx = 1; /* disable tx */
-+ config0.bits.loop_back = 0; /* enable/disable GMAC loopback */
-+ config0.bits.rx_err_detect = 1;
-+ config0.bits.rgmii_en = 0;
-+ config0.bits.rgmm_edge = 1;
-+ config0.bits.rxc_inv = 0;
-+ config0.bits.ipv4_rx_chksum = 1; /* enable H/W to check ip checksum */
-+ config0.bits.ipv6_rx_chksum = 1; /* enable H/W to check ip checksum */
-+ config0.bits.port0_chk_hwq = 1; // GaryChen 3/24/2006 2:26PM
-+ config0.bits.port1_chk_hwq = 1; // GaryChen 3/24/2006 2:26PM
-+ config0.bits.port0_chk_toeq = 1;
-+ config0.bits.port1_chk_toeq = 1;
-+ config0.bits.port0_chk_classq = 1;
-+ config0.bits.port1_chk_classq = 1;
-+
-+ config0_mask.bits.max_len = 7;
-+ config0_mask.bits.tx_fc_en = 1;
-+ config0_mask.bits.rx_fc_en = 1;
-+ config0_mask.bits.dis_rx = 1;
-+ config0_mask.bits.dis_tx = 1;
-+ config0_mask.bits.loop_back = 1;
-+ config0_mask.bits.rgmii_en = 1;
-+ config0_mask.bits.rgmm_edge = 1;
-+ config0_mask.bits.rxc_inv = 1;
-+ config0_mask.bits.ipv4_rx_chksum = 1;
-+ config0_mask.bits.ipv6_rx_chksum = 1;
-+ config0_mask.bits.port0_chk_hwq = 1;
-+ config0_mask.bits.port1_chk_hwq = 1;
-+ config0_mask.bits.port0_chk_toeq = 1;
-+ config0_mask.bits.port1_chk_toeq = 1;
-+ config0_mask.bits.port0_chk_classq = 1;
-+ config0_mask.bits.port1_chk_classq = 1;
-+ config0_mask.bits.rx_err_detect = 1;
-+
-+ #if 0
-+ config0.bits.dis_rx = 1; /* disable rx */
-+ config0.bits.dis_tx = 1; /* disable tx */
-+ config0.bits.loop_back = 0; /* enable/disable GMAC loopback */
-+ config0.bits.txc_inv = 0;
-+ config0.bits.rgmii_en = 0;
-+ config0.bits.rgmm_edge = 1;
-+ config0.bits.rxc_inv = 1;
-+ config0.bits.ipv4_tss_rx_en = 1; /* enable H/W to check ip checksum */
-+ config0.bits.ipv6_tss_rx_en = 1; /* enable H/W to check ip checksum */
-+
-+ config0_mask.bits.max_len = 3;
-+ config0_mask.bits.tx_fc_en = 1;
-+ config0_mask.bits.rx_fc_en = 1;
-+ config0_mask.bits.dis_rx = 1;
-+ config0_mask.bits.dis_tx = 1;
-+ config0_mask.bits.loop_back = 1;
-+ config0_mask.bits.rgmii_en = 1;
-+ config0_mask.bits.rgmm_edge = 1;
-+ config0_mask.bits.txc_inv = 1;
-+ config0_mask.bits.rxc_inv = 1;
-+ config0_mask.bits.ipv4_tss_rx_en = 1;
-+ config0_mask.bits.ipv6_tss_rx_en = 1;
-+ #endif
-+
-+ gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32);
-+
-+ #if 1
-+ hw_weigh.bits32 = 0;
-+ hw_weigh.bits.hw_tq3 = 1;
-+ hw_weigh.bits.hw_tq2 = 1;
-+ hw_weigh.bits.hw_tq1 = 1;
-+ hw_weigh.bits.hw_tq0 = 1;
-+ gmac_write_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_0_REG, hw_weigh.bits32, 0xffffffff);
-+
-+ sw_weigh.bits32 = 0;
-+ sw_weigh.bits.sw_tq5 = 1;
-+ sw_weigh.bits.sw_tq4 = 1;
-+ sw_weigh.bits.sw_tq3 = 1;
-+ sw_weigh.bits.sw_tq2 = 1;
-+ sw_weigh.bits.sw_tq1 = 1;
-+ sw_weigh.bits.sw_tq0 = 1;
-+ gmac_write_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_1_REG, sw_weigh.bits32, 0xffffffff);
-+ #endif
-+
-+ #if 0
-+ ahb_weight.bits32 = 0;
-+ ahb_weight_mask.bits32 = 0;
-+ ahb_weight.bits.rx_weight = 1;
-+ ahb_weight.bits.tx_weight = 1;
-+ ahb_weight.bits.hash_weight = 1;
-+ ahb_weight.bits.pre_req = 0x1f;
-+ ahb_weight.bits.tqDV_threshold = 0;
-+ ahb_weight_mask.bits.rx_weight = 0x1f;
-+ ahb_weight_mask.bits.tx_weight = 0x1f;
-+ ahb_weight_mask.bits.hash_weight = 0x1f;
-+ ahb_weight_mask.bits.pre_req = 0x1f;
-+ ahb_weight_mask.bits.tqDV_threshold = 0x1f;
-+ gmac_write_reg(tp->dma_base_addr, GMAC_AHB_WEIGHT_REG, ahb_weight.bits32, ahb_weight_mask.bits32);
-+ #endif
-+
-+ #if defined(CONFIG_SL351x_NAT) || defined(CONFIG_SL351x_RXTOE)
-+ gmac_write_reg(tp->dma_base_addr, GMAC_SPR0, IPPROTO_TCP, 0xffffffff);
-+ #endif
-+ #ifdef CONFIG_SL351x_NAT
-+ gmac_write_reg(tp->dma_base_addr, GMAC_SPR1, IPPROTO_UDP, 0xffffffff);
-+ gmac_write_reg(tp->dma_base_addr, GMAC_SPR2, IPPROTO_GRE, 0xffffffff);
-+ gmac_write_reg(tp->dma_base_addr, GMAC_SPR3, 0xff, 0xffffffff);
-+ gmac_write_reg(tp->dma_base_addr, GMAC_SPR4, 0xff, 0xffffffff);
-+ gmac_write_reg(tp->dma_base_addr, GMAC_SPR5, 0xff, 0xffffffff);
-+ gmac_write_reg(tp->dma_base_addr, GMAC_SPR6, 0xff, 0xffffffff);
-+ gmac_write_reg(tp->dma_base_addr, GMAC_SPR7, 0xff, 0xffffffff);
-+
-+ sl351x_nat_init();
-+ #endif
-+
-+ #ifdef CONFIG_SL351x_RXTOE
-+ /* setup matching rule to TOE */
-+ sl351x_toe_init();
-+ #endif
-+
-+ // for A1 ASIC version
-+// hash_ctrl.bits32 = 0;
-+// hash_ctrl.bits.timing = 6;
-+// gmac_write_reg(tp->dma_base_addr, GMAC_HASH_ENGINE_REG0, hash_ctrl.bits32, 0xffffffff);
-+
-+ return (0);
-+}
-+
-+/*----------------------------------------------------------------------
-+* toe_gmac_enable_tx_rx
-+*----------------------------------------------------------------------*/
-+static void toe_gmac_enable_tx_rx(struct net_device *dev)
-+{
-+ GMAC_INFO_T *tp = dev->priv;
-+ GMAC_CONFIG0_T config0,config0_mask;
-+
-+ /* enable TX/RX */
-+ config0.bits32 = 0;
-+ config0_mask.bits32 = 0;
-+ config0.bits.dis_rx = 0; /* enable rx */
-+ config0.bits.dis_tx = 0; /* enable tx */
-+ config0_mask.bits.dis_rx = 1;
-+ config0_mask.bits.dis_tx = 1;
-+ gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32);
-+}
-+/*----------------------------------------------------------------------
-+* toe_gmac_disable_rx
-+*----------------------------------------------------------------------*/
-+#if 0
-+static void toe_gmac_disable_rx(struct net_device *dev)
-+{
-+ GMAC_INFO_T *tp = dev->priv;
-+ GMAC_CONFIG0_T config0,config0_mask;
-+
-+ /* enable TX/RX */
-+ config0.bits32 = 0;
-+ config0_mask.bits32 = 0;
-+ config0.bits.dis_rx = 1; /* disable rx */
-+// config0.bits.dis_tx = 1; /* disable tx */
-+ config0_mask.bits.dis_rx = 1;
-+// config0_mask.bits.dis_tx = 1;
-+ gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32);
-+}
-+#endif
-+/*----------------------------------------------------------------------
-+* toe_gmac_enable_rx
-+*----------------------------------------------------------------------*/
-+#if 0
-+static void toe_gmac_enable_rx(struct net_device *dev)
-+{
-+ GMAC_INFO_T *tp = dev->priv;
-+ GMAC_CONFIG0_T config0,config0_mask;
-+
-+ /* enable TX/RX */
-+ config0.bits32 = 0;
-+ config0_mask.bits32 = 0;
-+ config0.bits.dis_rx = 0; /* enable rx */
-+// config0.bits.dis_tx = 0; /* enable tx */
-+ config0_mask.bits.dis_rx = 1;
-+// config0_mask.bits.dis_tx = 1;
-+ gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32);
-+}
-+#endif
-+/*----------------------------------------------------------------------
-+* toe_gmac_disable_tx_rx
-+*----------------------------------------------------------------------*/
-+static void toe_gmac_disable_tx_rx(struct net_device *dev)
-+{
-+ GMAC_INFO_T *tp = dev->priv;
-+ GMAC_CONFIG0_T config0,config0_mask;
-+
-+ /* enable TX/RX */
-+ config0.bits32 = 0;
-+ config0_mask.bits32 = 0;
-+ config0.bits.dis_rx = 1; /* disable rx */
-+ config0.bits.dis_tx = 1; /* disable tx */
-+ config0_mask.bits.dis_rx = 1;
-+ config0_mask.bits.dis_tx = 1;
-+ gmac_write_reg(tp->base_addr, GMAC_CONFIG0, config0.bits32,config0_mask.bits32);
-+}
-+
-+/*----------------------------------------------------------------------
-+* toe_gmac_hw_start
-+*----------------------------------------------------------------------*/
-+static void toe_gmac_hw_start(struct net_device *dev)
-+{
-+ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
-+ GMAC_DMA_CTRL_T dma_ctrl, dma_ctrl_mask;
-+
-+
-+ /* program dma control register */
-+ dma_ctrl.bits32 = 0;
-+ dma_ctrl.bits.rd_enable = 1;
-+ dma_ctrl.bits.td_enable = 1;
-+ dma_ctrl.bits.loopback = 0;
-+ dma_ctrl.bits.drop_small_ack = 0;
-+ dma_ctrl.bits.rd_prot = 0;
-+ dma_ctrl.bits.rd_burst_size = 3;
-+ dma_ctrl.bits.rd_insert_bytes = RX_INSERT_BYTES;
-+ dma_ctrl.bits.rd_bus = 3;
-+ dma_ctrl.bits.td_prot = 0;
-+ dma_ctrl.bits.td_burst_size = 3;
-+ dma_ctrl.bits.td_bus = 3;
-+
-+ dma_ctrl_mask.bits32 = 0;
-+ dma_ctrl_mask.bits.rd_enable = 1;
-+ dma_ctrl_mask.bits.td_enable = 1;
-+ dma_ctrl_mask.bits.loopback = 1;
-+ dma_ctrl_mask.bits.drop_small_ack = 1;
-+ dma_ctrl_mask.bits.rd_prot = 3;
-+ dma_ctrl_mask.bits.rd_burst_size = 3;
-+ dma_ctrl_mask.bits.rd_insert_bytes = 3;
-+ dma_ctrl_mask.bits.rd_bus = 3;
-+ dma_ctrl_mask.bits.td_prot = 0x0f;
-+ dma_ctrl_mask.bits.td_burst_size = 3;
-+ dma_ctrl_mask.bits.td_bus = 3;
-+
-+ gmac_write_reg(tp->dma_base_addr, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
-+
-+ return;
-+}
-+
-+/*----------------------------------------------------------------------
-+* toe_gmac_hw_stop
-+*----------------------------------------------------------------------*/
-+static void toe_gmac_hw_stop(struct net_device *dev)
-+{
-+ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
-+ GMAC_DMA_CTRL_T dma_ctrl, dma_ctrl_mask;
-+
-+ /* program dma control register */
-+ dma_ctrl.bits32 = 0;
-+ dma_ctrl.bits.rd_enable = 0;
-+ dma_ctrl.bits.td_enable = 0;
-+
-+ dma_ctrl_mask.bits32 = 0;
-+ dma_ctrl_mask.bits.rd_enable = 1;
-+ dma_ctrl_mask.bits.td_enable = 1;
-+
-+ gmac_write_reg(tp->dma_base_addr, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
-+}
-+
-+/*----------------------------------------------------------------------
-+* toe_gmac_clear_counter
-+*----------------------------------------------------------------------*/
-+static int toe_gmac_clear_counter (struct net_device *dev)
-+{
-+ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
-+
-+ /* clear counter */
-+ gmac_read_reg(tp->base_addr, GMAC_IN_DISCARDS);
-+ gmac_read_reg(tp->base_addr, GMAC_IN_ERRORS);
-+ gmac_read_reg(tp->base_addr, GMAC_IN_MCAST);
-+ gmac_read_reg(tp->base_addr, GMAC_IN_BCAST);
-+ gmac_read_reg(tp->base_addr, GMAC_IN_MAC1);
-+ gmac_read_reg(tp->base_addr, GMAC_IN_MAC2);
-+ tp->ifStatics.tx_bytes = 0;
-+ tp->ifStatics.tx_packets = 0;
-+ tp->ifStatics.tx_errors = 0;
-+ tp->ifStatics.rx_bytes = 0;
-+ tp->ifStatics.rx_packets = 0;
-+ tp->ifStatics.rx_errors = 0;
-+ tp->ifStatics.rx_dropped = 0;
-+ return (0);
-+}
-+
-+
-+/*----------------------------------------------------------------------
-+* toe_gmac_tx_complete
-+*----------------------------------------------------------------------*/
-+static void toe_gmac_tx_complete(GMAC_INFO_T *tp, unsigned int tx_qid,
-+ struct net_device *dev, int interrupt)
-+{
-+ volatile GMAC_TXDESC_T *curr_desc;
-+ GMAC_TXDESC_0_T word0;
-+ GMAC_TXDESC_1_T word1;
-+ unsigned int desc_count;
-+// struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
-+ GMAC_SWTXQ_T *swtxq;
-+ DMA_RWPTR_T rwptr;
-+
-+ /* get tx H/W completed descriptor virtual address */
-+ /* check tx status and accumulate tx statistics */
-+ swtxq = &tp->swtxq[tx_qid];
-+ swtxq->intr_cnt++;
-+ for (;;)
-+ {
-+ rwptr.bits32 = readl(swtxq->rwptr_reg);
-+ if (rwptr.bits.rptr == swtxq->finished_idx)
-+ break;
-+ curr_desc = (volatile GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
-+// consistent_sync((void *)curr_desc, sizeof(GMAC_TXDESC_T), PCI_DMA_FROMDEVICE);
-+ word0.bits32 = curr_desc->word0.bits32;
-+ word1.bits32 = curr_desc->word1.bits32;
-+
-+ if (word0.bits.status_tx_ok)
-+ {
-+ tp->ifStatics.tx_bytes += word1.bits.byte_count;
-+ desc_count = word0.bits.desc_count;
-+ if (desc_count==0)
-+ {
-+ printk("%s::Desc 0x%x = 0x%x, desc_count=%d\n",__func__, (u32)curr_desc, word0.bits32, desc_count);
-+ while(1);
-+ }
-+ while (--desc_count)
-+ {
-+ word0.bits.status_tx_ok = 0;
-+ curr_desc->word0.bits32 = word0.bits32;
-+ swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num);
-+ curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
-+ word0.bits32 = curr_desc->word0.bits32;
-+#ifdef _DUMP_TX_TCP_CONTENT
-+ if (curr_desc->word0.bits.buffer_size < 16)
-+ {
-+ int a;
-+ char *datap;
-+ printk("\t Tx Finished Desc 0x%x Len %d Addr 0x%08x: ", (u32)curr_desc, curr_desc->word0.bits.buffer_size, curr_desc->word2.buf_adr);
-+ datap = (char *)__va(curr_desc->word2.buf_adr);
-+ for (a=0; a<8 && a<curr_desc->word0.bits.buffer_size; a++, datap++)
-+ {
-+ printk("0x%02x ", *datap);
-+ }
-+ printk("\n");
-+ }
-+#endif
-+ }
-+
-+ word0.bits.status_tx_ok = 0;
-+ if (swtxq->tx_skb[swtxq->finished_idx])
-+ {
-+ if (interrupt)
-+ dev_kfree_skb_irq(swtxq->tx_skb[swtxq->finished_idx]);
-+ else
-+ dev_kfree_skb(swtxq->tx_skb[swtxq->finished_idx]);
-+ swtxq->tx_skb[swtxq->finished_idx] = NULL;
-+ }
-+ curr_desc->word0.bits32 = word0.bits32;
-+ swtxq->curr_finished_desc = (GMAC_TXDESC_T *)curr_desc;
-+ swtxq->total_finished++;
-+ tp->ifStatics.tx_packets++;
-+ swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num);
-+ }
-+ else
-+ {
-+ // tp->ifStatics.tx_errors++;
-+ // printk("%s::Tx Descriptor is !!!\n",__func__);
-+ // wait ready by breaking
-+ break;
-+ }
-+ }
-+
-+ if (netif_queue_stopped(dev))
-+ {
-+ netif_wake_queue(dev);
-+ }
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_start_xmit
-+*----------------------------------------------------------------------*/
-+static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+ GMAC_INFO_T *tp= dev->priv;
-+// static unsigned int pcount = 0;
-+// unsigned int tx_qid;
-+ DMA_RWPTR_T rwptr;
-+ volatile GMAC_TXDESC_T *curr_desc;
-+ int snd_pages = skb_shinfo(skb)->nr_frags + 1; /* get number of descriptor */
-+ int frag_id = 0;
-+ int len, total_len = skb->len;
-+ struct net_device_stats *isPtr;
-+ unsigned int free_desc;
-+ GMAC_SWTXQ_T *swtxq;
-+ register unsigned long word0, word1, word2, word3;
-+ unsigned short wptr, rptr;
-+#ifdef L2_jumbo_frame
-+ int header_len = skb->len;
-+ struct iphdr *ip_hdr;
-+ struct tcphdr *tcp_hdr;
-+ int tcp_hdr_len;
-+ unsigned char *ptr;
-+ int data_len,a;
-+ unsigned int val;
-+#endif
-+
-+#ifdef GMAC_LEN_1_2_ISSUE
-+ int total_pages;
-+ total_pages = snd_pages;
-+#endif
-+
-+ isPtr = (struct net_device_stats *)&tp->ifStatics;
-+#if 1
-+ if (skb->len >= 0x10000)
-+ {
-+// spin_unlock(&tp->tx_mutex);
-+ isPtr->tx_dropped++;
-+ printk("%s::[GMAC %d] skb->len %d >= 64K\n", __func__, tp->port_id, skb->len);
-+ netif_stop_queue(dev);
-+ return 1;
-+ }
-+#endif
-+
-+#if 0
-+ if (storlink_ctl.recvfile==2)
-+ {
-+ printk("snd_pages=%d skb->len=%d\n",snd_pages,skb->len);
-+ }
-+#endif
-+
-+#ifdef GMAC_USE_TXQ0
-+ #define tx_qid 0
-+#endif
-+
-+ swtxq = &tp->swtxq[tx_qid];
-+
-+// spin_lock(&tp->tx_mutex);
-+ rwptr.bits32 = readl(swtxq->rwptr_reg);
-+ wptr = rwptr.bits.wptr;
-+ rptr = rwptr.bits.rptr;
-+
-+ // check finished desc or empty BD
-+ // cannot check by read ptr of RW PTR register,
-+ // because the HW complete to send but the SW may NOT handle it
-+#ifndef GMAX_TX_INTR_DISABLED
-+ if (wptr >= swtxq->finished_idx)
-+ free_desc = swtxq->total_desc_num - wptr - 1 + swtxq->finished_idx;
-+ else
-+ free_desc = swtxq->finished_idx - wptr - 1;
-+
-+ if (free_desc < snd_pages)
-+ {
-+// spin_unlock(&tp->tx_mutex);
-+ isPtr->tx_dropped++;
-+// printk("GMAC %d No available descriptor!\n", tp->port_id);
-+ netif_stop_queue(dev);
-+ return 1;
-+ }
-+#else
-+ toe_gmac_tx_complete(tp, tx_qid, dev, 0);
-+
-+ if (wptr >= swtxq->finished_idx)
-+ free_desc = swtxq->total_desc_num - wptr - 1 + swtxq->finished_idx;
-+ else
-+ free_desc = swtxq->finished_idx - wptr - 1;
-+ if (free_desc < snd_pages)
-+ {
-+// spin_unlock(&tp->tx_mutex);
-+ isPtr->tx_dropped++;
-+// printk("GMAC %d No available descriptor!\n", tp->port_id);
-+ netif_stop_queue(dev);
-+ return 1;
-+ }
-+
-+#if 0
-+ printk("1: free_desc=%d, wptr=%d, finished_idx=%d\n", free_desc, wptr, swtxq->finished_idx);
-+ if ((free_desc < (snd_pages << 2)) ||
-+ (free_desc < (swtxq->total_desc_num >> 2)))
-+ {
-+ printk("2: free_desc = %d\n", free_desc);
-+ toe_gmac_tx_complete(tp, tx_qid, dev, 0);
-+ rwptr.bits32 = readl(swtxq->rwptr_reg);
-+ wptr = rwptr.bits.wptr;
-+ if (wptr>= swtxq->finished_idx)
-+ free_desc = swtxq->total_desc_num - wptr -1 + swtxq->finished_idx;
-+ else
-+ free_desc = swtxq->finished_idx - wptr - 1;
-+ }
-+#endif
-+#endif
-+
-+#ifdef L2_jumbo_frame
-+// data_len = skb->len - 14 - ip_hdr->ihl *4 - tcp_hdr_len;
-+// if ((skb->nh.iph->protocol == __constant_htons(ETH_P_IP)) && ((skb->nh.iph->protocol & 0x00ff) == IPPROTO_TCP))
-+// if (skb->nh.iph->protocol == 0x006 && (skb->nh.iph->protocol == __constant_htons(ETH_P_IP)))
-+ if (((skb->nh.iph->protocol & 0x00ff) == IPPROTO_TCP))
-+ {
-+ ip_hdr = (struct iphdr*)(skb->nh.iph);
-+ tcp_hdr = (struct tcphdr*)(skb->h.th);
-+ tcp_hdr_len = TCPHDRLEN(tcp_hdr) * 4;
-+ tcp_hdr_len = TCPHDRLEN(tcp_hdr) * 4;
-+
-+ if ((skb->h.th->syn) && (tcp_hdr_len > 20))
-+ {
-+ ptr = (unsigned char *)(tcp_hdr+1);
-+ if ((ptr[0] == 0x02) && (ptr[1] == 0x04) && (ptr[2] == 0x07) && (ptr[3] == 0xba)) // 0x07 aa=2016-54=1962 ,0x07ba=2032-54=1978
-+ {
-+ ptr[2]=0x20; //23
-+ ptr[3]=0x00; //00
-+ printk("-----> Change MSS to 8K \n" );
-+ }
-+ }
-+ }
-+// if ((ip_hdr->protocol & 0x00ff) != IPPROTO_TCP)
-+// if ((tcp_hdr_len > 20) && (skb->h.th->syn))
-+#endif
-+
-+
-+#if 0
-+ if (snd_pages > 1)
-+ printk("-----> snd_pages=%d\n", snd_pages);
-+ if (total_len > 1514)
-+ {
-+ printk("-----> total_len=%d\n", total_len);
-+ }
-+#endif
-+
-+ while (snd_pages)
-+ {
-+ char *pkt_datap;
-+
-+ curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + wptr;
-+// consistent_sync((void *)curr_desc, sizeof(GMAC_TXDESC_T), PCI_DMA_FROMDEVICE);
-+#if 0
-+//#if (GMAC_DEBUG==1)
-+ // if curr_desc->word2.buf_adr !=0 means that the ISR does NOT handle it
-+ // if (curr_desc->word2.buf_adr)
-+ if (swtxq->tx_skb[wptr])
-+ {
-+ printk("Error! Stop due to TX descriptor's buffer is not freed!\n");
-+ while(1);
-+ dev_kfree_skb(swtxq->tx_skb[wptr]);
-+ swtxq->tx_skb[wptr] = NULL;
-+ }
-+#endif
-+
-+ if (frag_id == 0)
-+ {
-+#if 0
-+ int i;
-+ pkt_datap = skb->data;
-+ len = total_len;
-+ for (i=0; i<skb_shinfo(skb)->nr_frags; i++)
-+ {
-+ skb_frag_t* frag = &skb_shinfo(skb)->frags[i];
-+ len -= frag->size;
-+ }
-+#else
-+ pkt_datap = skb->data;
-+ len = total_len - skb->data_len;
-+#endif
-+ }
-+ else
-+ {
-+ skb_frag_t* frag = &skb_shinfo(skb)->frags[frag_id-1];
-+ pkt_datap = page_address(frag->page) + frag->page_offset;
-+ len = frag->size;
-+ if (len > total_len)
-+ {
-+ printk("===> Fatal Error! Send Frag size %d > Total Size %d!!!!!\n",
-+ len, total_len);
-+ }
-+ }
-+
-+ /* set TX descriptor */
-+ /* copy packet to descriptor buffer address */
-+ // curr_desc->word0.bits32 = len; /* total frame byte count */
-+ word0 = len;
-+#ifdef L2_jumbo_frame
-+ word3 = (dev->mtu+14) | EOFIE_BIT; //2016 ,2032
-+#else
-+ word3 = 1514 | EOFIE_BIT;
-+#endif
-+
-+#ifdef DO_HW_CHKSUM
-+#ifdef L2_jumbo_frame
-+ if (total_len >= (dev->mtu+14) && (skb->nh.iph->protocol == 0x011) && skb->nh.iph && (skb->nh.iph->frag_off & __constant_htons(0x3fff)))
-+#else
-+ if (total_len <= 1514 && ip_hdr(skb) && (ip_hdr(skb)->frag_off & __constant_htons(0x3fff)))
-+#endif
-+ word1 = total_len |
-+ TSS_IP_CHKSUM_BIT |
-+ TSS_IPV6_ENABLE_BIT |
-+ TSS_MTU_ENABLE_BIT;
-+ else
-+ word1 = total_len |
-+ TSS_UDP_CHKSUM_BIT |
-+ TSS_TCP_CHKSUM_BIT |
-+ TSS_IP_CHKSUM_BIT |
-+ TSS_IPV6_ENABLE_BIT |
-+ TSS_MTU_ENABLE_BIT;
-+#else
-+ word1 = total_len | TSS_MTU_ENABLE_BIT;
-+#endif
-+ word2 = (unsigned long)__pa(pkt_datap);
-+
-+ if (frag_id == 0)
-+ {
-+ word3 |= SOF_BIT; // SOF
-+ }
-+
-+ if (snd_pages == 1)
-+ {
-+ word3 |= EOF_BIT; // EOF
-+ swtxq->tx_skb[wptr] = skb;
-+#ifdef CONFIG_SL351x_NAT
-+ if (nat_cfg.enabled && sl351x_nat_output(skb, tp->port_id))
-+ word1 |= TSS_IP_FIXED_LEN_BIT;
-+#endif
-+ }
-+ else
-+ swtxq->tx_skb[wptr] = NULL;
-+ // word1 |= TSS_IP_FIXED_LEN_BIT;
-+#if 1
-+#ifdef CONFIG_SL351x_RXTOE
-+ // check if this frame has the mission to enable toe hash entry..
-+ // if rx_max_pktsize ==0, do not enable RXTOE
-+ if (TCP_SKB_CB(skb)->connection && storlink_ctl.rx_max_pktsize) {
-+ set_toeq_hdr(TCP_SKB_CB(skb)->connection, &toe_private_data, dev);
-+ }
-+#endif
-+#endif
-+#ifdef _DUMP_TX_TCP_CONTENT
-+ if (len < 16 && frag_id && skb->h.th && (skb->h.th->source == __constant_htons(445) || skb->h.th->source == __constant_htons(139)))
-+ {
-+ int a;
-+ char *datap;
-+ printk("Tx Desc 0x%x Frag %d Len %d [IP-ID 0x%x] 0x%08x: ", (u32)curr_desc, frag_id, len, htons(skb->nh.iph->id), (u32)pkt_datap);
-+ datap = (char *)pkt_datap;
-+ for (a=0; a<8 && a<len; a++, datap++)
-+ {
-+ printk("0x%02x ", *datap);
-+ }
-+ printk("\n");
-+ }
-+#endif
-+
-+#ifdef GMAC_LEN_1_2_ISSUE
-+ if ((total_pages!=snd_pages) && (len == 1 || len == 2 ) && ((u32)pkt_datap & 0x03))
-+ {
-+ memcpy((void *)&_debug_prefetch_buf[_debug_prefetch_cnt][0], pkt_datap, len);
-+ pkt_datap = (char *)&_debug_prefetch_buf[_debug_prefetch_cnt][0];
-+ word2 = (unsigned long)__pa(pkt_datap);
-+ _debug_prefetch_cnt++;
-+ if (_debug_prefetch_cnt >= _DEBUG_PREFETCH_NUM)
-+ _debug_prefetch_cnt = 0;
-+ }
-+#endif
-+
-+ consistent_sync((void *)pkt_datap, len, PCI_DMA_TODEVICE);
-+ wmb();
-+ curr_desc->word0.bits32 = word0;
-+ curr_desc->word1.bits32 = word1;
-+ curr_desc->word2.bits32 = word2;
-+ curr_desc->word3.bits32 = word3;
-+ swtxq->curr_tx_desc = (GMAC_TXDESC_T *)curr_desc;
-+// consistent_sync((void *)curr_desc, sizeof(GMAC_TXDESC_T), PCI_DMA_TODEVICE);
-+#ifdef _DUMP_TX_TCP_CONTENT
-+ if (len < 16 && frag_id && skb->h.th && (skb->h.th->source == __constant_htons(445) || skb->h.th->source == __constant_htons(139)))
-+ {
-+ int a;
-+ char *datap;
-+ printk("\t 0x%08x: ", (u32)pkt_datap);
-+ datap = (char *)pkt_datap;
-+ for (a=0; a<8 && a<len; a++, datap++)
-+ {
-+ printk("0x%02x ", *datap);
-+ }
-+ printk("\n");
-+ }
-+#endif
-+ free_desc--;
-+ wmb();
-+ wptr = RWPTR_ADVANCE_ONE(wptr, swtxq->total_desc_num);
-+ frag_id++;
-+ snd_pages--;
-+ }
-+
-+ swtxq->total_sent++;
-+ SET_WPTR(swtxq->rwptr_reg, wptr);
-+ dev->trans_start = jiffies;
-+
-+
-+ // printk("MAC %d Qid %d rwptr = 0x%x, curr_desc=0x%x\n", skb->tx_port_id, tx_qid, rwptr.bits32, curr_desc);
-+//#ifdef GMAX_TX_INTR_DISABLED
-+// toe_gmac_tx_complete(tp, tx_qid, dev, 0);
-+//#endif
-+ return (0);
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_set_mac_address
-+*----------------------------------------------------------------------*/
-+
-+static int gmac_set_mac_address(struct net_device *dev, void *addr)
-+{
-+ GMAC_INFO_T *tp= dev->priv;
-+ struct sockaddr *sock;
-+ unsigned int reg_val;
-+ unsigned int i;
-+
-+ sock = (struct sockaddr *) addr;
-+ for (i = 0; i < 6; i++)
-+ {
-+ dev->dev_addr[i] = sock->sa_data[i];
-+ }
-+
-+ reg_val = dev->dev_addr[0] + (dev->dev_addr[1]<<8) + (dev->dev_addr[2]<<16) + (dev->dev_addr[3]<<24);
-+ gmac_write_reg(tp->base_addr,GMAC_STA_ADD0,reg_val,0xffffffff);
-+ reg_val = dev->dev_addr[4] + (dev->dev_addr[5]<<8);
-+ gmac_write_reg(tp->base_addr,GMAC_STA_ADD1,reg_val,0x0000ffff);
-+ memcpy(&eth_mac[tp->port_id][0],&dev->dev_addr[0],6);
-+
-+ printk("Storlink %s address = ",dev->name);
-+ printk("%02x",dev->dev_addr[0]);
-+ printk("%02x",dev->dev_addr[1]);
-+ printk("%02x",dev->dev_addr[2]);
-+ printk("%02x",dev->dev_addr[3]);
-+ printk("%02x",dev->dev_addr[4]);
-+ printk("%02x\n",dev->dev_addr[5]);
-+
-+ return (0);
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_get_mac_address
-+* get mac address from FLASH
-+*----------------------------------------------------------------------*/
-+static void gmac_get_mac_address(void)
-+{
-+#ifdef CONFIG_MTD
-+ extern int get_vlaninfo(vlaninfo* vlan);
-+ static vlaninfo vlan[2];
-+
-+ if (get_vlaninfo(&vlan[0]))
-+ {
-+ memcpy((void *)&eth_mac[0][0],vlan[0].mac,6);
-+ // VLAN_conf[0].vid = vlan[0].vlanid;
-+ // VLAN_conf[0].portmap = vlan[0].vlanmap;
-+ memcpy((void *)&eth_mac[1][0],vlan[1].mac,6);
-+ // VLAN_conf[1].vid = vlan[1].vlanid;
-+ // VLAN_conf[1].portmap = vlan[1].vlanmap;
-+ }
-+#else
-+ unsigned int reg_val;
-+
-+ reg_val = readl(IO_ADDRESS(TOE_GMAC0_BASE)+0xac);
-+ eth_mac[0][4] = (reg_val & 0xff00) >> 8;
-+ eth_mac[0][5] = reg_val & 0x00ff;
-+ reg_val = readl(IO_ADDRESS(SL2312_SECURITY_BASE)+0xac);
-+ eth_mac[1][4] = (reg_val & 0xff00) >> 8;
-+ eth_mac[1][5] = reg_val & 0x00ff;
-+#endif
-+ return;
-+}
-+
-+
-+/*----------------------------------------------------------------------
-+* mac_stop_txdma
-+*----------------------------------------------------------------------*/
-+void mac_stop_txdma(struct net_device *dev)
-+{
-+ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
-+ GMAC_DMA_CTRL_T dma_ctrl, dma_ctrl_mask;
-+ GMAC_TXDMA_FIRST_DESC_T txdma_busy;
-+
-+ // wait idle
-+ do
-+ {
-+ txdma_busy.bits32 = gmac_read_reg(tp->dma_base_addr, GMAC_DMA_TX_FIRST_DESC_REG);
-+ } while (txdma_busy.bits.td_busy);
-+
-+ /* program dma control register */
-+ dma_ctrl.bits32 = 0;
-+ dma_ctrl.bits.rd_enable = 0;
-+ dma_ctrl.bits.td_enable = 0;
-+
-+ dma_ctrl_mask.bits32 = 0;
-+ dma_ctrl_mask.bits.rd_enable = 1;
-+ dma_ctrl_mask.bits.td_enable = 1;
-+
-+ gmac_write_reg(tp->dma_base_addr, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_start_txdma
-+*----------------------------------------------------------------------*/
-+void mac_start_txdma(struct net_device *dev)
-+{
-+ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
-+ GMAC_DMA_CTRL_T dma_ctrl, dma_ctrl_mask;
-+
-+ /* program dma control register */
-+ dma_ctrl.bits32 = 0;
-+ dma_ctrl.bits.rd_enable = 1;
-+ dma_ctrl.bits.td_enable = 1;
-+
-+ dma_ctrl_mask.bits32 = 0;
-+ dma_ctrl_mask.bits.rd_enable = 1;
-+ dma_ctrl_mask.bits.td_enable = 1;
-+
-+ gmac_write_reg(tp->dma_base_addr, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
-+}
-+
-+
-+/*----------------------------------------------------------------------
-+* gmac_get_stats
-+*----------------------------------------------------------------------*/
-+
-+struct net_device_stats * gmac_get_stats(struct net_device *dev)
-+{
-+ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
-+ // unsigned int flags;
-+ unsigned int pkt_drop;
-+ unsigned int pkt_error;
-+
-+ if (netif_running(dev))
-+ {
-+ /* read H/W counter */
-+ // spin_lock_irqsave(&tp->lock,flags);
-+ pkt_drop = gmac_read_reg(tp->base_addr,GMAC_IN_DISCARDS);
-+ pkt_error = gmac_read_reg(tp->base_addr,GMAC_IN_ERRORS);
-+ tp->ifStatics.rx_dropped = tp->ifStatics.rx_dropped + pkt_drop;
-+ tp->ifStatics.rx_errors = tp->ifStatics.rx_errors + pkt_error;
-+ // spin_unlock_irqrestore(&tp->lock,flags);
-+ }
-+ return &tp->ifStatics;
-+}
-+
-+
-+
-+/*----------------------------------------------------------------------
-+* mac_get_sw_tx_weight
-+*----------------------------------------------------------------------*/
-+void mac_get_sw_tx_weight(struct net_device *dev, char *weight)
-+{
-+ GMAC_TX_WCR1_T sw_weigh;
-+ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
-+
-+ sw_weigh.bits32 = gmac_read_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_1_REG);
-+
-+ weight[0] = sw_weigh.bits.sw_tq0;
-+ weight[1] = sw_weigh.bits.sw_tq1;
-+ weight[2] = sw_weigh.bits.sw_tq2;
-+ weight[3] = sw_weigh.bits.sw_tq3;
-+ weight[4] = sw_weigh.bits.sw_tq4;
-+ weight[5] = sw_weigh.bits.sw_tq5;
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_set_sw_tx_weight
-+*----------------------------------------------------------------------*/
-+void mac_set_sw_tx_weight(struct net_device *dev, char *weight)
-+{
-+ GMAC_TX_WCR1_T sw_weigh;
-+ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
-+
-+ sw_weigh.bits32 = 0;
-+ sw_weigh.bits.sw_tq0 = weight[0];
-+ sw_weigh.bits.sw_tq1 = weight[1];
-+ sw_weigh.bits.sw_tq2 = weight[2];
-+ sw_weigh.bits.sw_tq3 = weight[3];
-+ sw_weigh.bits.sw_tq4 = weight[4];
-+ sw_weigh.bits.sw_tq5 = weight[5];
-+
-+ gmac_write_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_1_REG, sw_weigh.bits32, 0xffffffff);
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_get_hw_tx_weight
-+*----------------------------------------------------------------------*/
-+void mac_get_hw_tx_weight(struct net_device *dev, char *weight)
-+{
-+ GMAC_TX_WCR0_T hw_weigh;
-+ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
-+
-+ hw_weigh.bits32 = gmac_read_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_0_REG);
-+
-+ weight[0] = hw_weigh.bits.hw_tq0;
-+ weight[1] = hw_weigh.bits.hw_tq1;
-+ weight[2] = hw_weigh.bits.hw_tq2;
-+ weight[3] = hw_weigh.bits.hw_tq3;
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_set_hw_tx_weight
-+*----------------------------------------------------------------------*/
-+void mac_set_hw_tx_weight(struct net_device *dev, char *weight)
-+{
-+ GMAC_TX_WCR0_T hw_weigh;
-+ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
-+
-+ hw_weigh.bits32 = 0;
-+ hw_weigh.bits.hw_tq0 = weight[0];
-+ hw_weigh.bits.hw_tq1 = weight[1];
-+ hw_weigh.bits.hw_tq2 = weight[2];
-+ hw_weigh.bits.hw_tq3 = weight[3];
-+
-+ gmac_write_reg(tp->dma_base_addr, GMAC_TX_WEIGHTING_CTRL_0_REG, hw_weigh.bits32, 0xffffffff);
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_start_tx_dma
-+*----------------------------------------------------------------------*/
-+int mac_start_tx_dma(int mac)
-+{
-+ GMAC_DMA_CTRL_T dma_ctrl, dma_ctrl_mask;
-+
-+ dma_ctrl.bits32 = 0;
-+ dma_ctrl.bits.td_enable = 1;
-+
-+ dma_ctrl_mask.bits32 = 0;
-+ dma_ctrl_mask.bits.td_enable = 1;
-+
-+ if (mac == 0)
-+ gmac_write_reg(TOE_GMAC0_DMA_BASE, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
-+ else
-+ gmac_write_reg(TOE_GMAC1_DMA_BASE, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
-+ return 1;
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_stop_tx_dma
-+*----------------------------------------------------------------------*/
-+int mac_stop_tx_dma(int mac)
-+{
-+ GMAC_DMA_CTRL_T dma_ctrl, dma_ctrl_mask;
-+
-+ dma_ctrl.bits32 = 0;
-+ dma_ctrl.bits.td_enable = 0;
-+
-+ dma_ctrl_mask.bits32 = 0;
-+ dma_ctrl_mask.bits.td_enable = 1;
-+
-+ if (mac == 0)
-+ gmac_write_reg(TOE_GMAC0_DMA_BASE, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
-+ else
-+ gmac_write_reg(TOE_GMAC1_DMA_BASE, GMAC_DMA_CTRL_REG, dma_ctrl.bits32, dma_ctrl_mask.bits32);
-+ return 1;
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_read_reg(int mac, unsigned int offset)
-+*----------------------------------------------------------------------*/
-+unsigned int mac_read_reg(int mac, unsigned int offset)
-+{
-+ switch (mac)
-+ {
-+ case 0:
-+ return gmac_read_reg(TOE_GMAC0_BASE, offset);
-+ case 1:
-+ return gmac_read_reg(TOE_GMAC1_BASE, offset);
-+ default:
-+ return 0;
-+ }
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_write_reg
-+*----------------------------------------------------------------------*/
-+void mac_write_reg(int mac, unsigned int offset, unsigned data)
-+{
-+ switch (mac)
-+ {
-+ case 0:
-+ gmac_write_reg(GMAC0_BASE, offset, data, 0xffffffff);
-+ break;
-+ case 1:
-+ gmac_write_reg(GMAC1_BASE, offset, data, 0xffffffff);
-+ break;
-+ }
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_read_dma_reg(int mac, unsigned int offset)
-+*----------------------------------------------------------------------*/
-+u32 mac_read_dma_reg(int mac, unsigned int offset)
-+{
-+ switch (mac)
-+ {
-+ case 0:
-+ return gmac_read_reg(TOE_GMAC0_DMA_BASE, offset);
-+ case 1:
-+ return gmac_read_reg(TOE_GMAC1_DMA_BASE, offset);
-+ default:
-+ return 0;
-+ }
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_write_dma_reg
-+*----------------------------------------------------------------------*/
-+void mac_write_dma_reg(int mac, unsigned int offset, u32 data)
-+{
-+ switch (mac)
-+ {
-+ case 0:
-+ gmac_write_reg(TOE_GMAC0_DMA_BASE, offset, data, 0xffffffff);
-+ break;
-+ case 1:
-+ gmac_write_reg(TOE_GMAC1_DMA_BASE, offset, data, 0xffffffff);
-+ break;
-+ }
-+}
-+
-+/*----------------------------------------------------------------------
-+* ether_crc
-+*----------------------------------------------------------------------*/
-+static unsigned const ethernet_polynomial = 0x04c11db7U;
-+static unsigned int ether_crc (int length, unsigned char *data)
-+{
-+ int crc = -1;
-+ unsigned int i;
-+ unsigned int crc_val=0;
-+
-+ while (--length >= 0) {
-+ unsigned char current_octet = *data++;
-+ int bit;
-+ for (bit = 0; bit < 8; bit++, current_octet >>= 1)
-+ crc = (crc << 1) ^ ((crc < 0) ^ (current_octet & 1) ?
-+ ethernet_polynomial : 0);
-+ }
-+ crc = ~crc;
-+ for (i=0;i<32;i++)
-+ {
-+ crc_val = crc_val + (((crc << i) & 0x80000000) >> (31-i));
-+ }
-+ return crc_val;
-+}
-+
-+
-+
-+/*----------------------------------------------------------------------
-+* mac_set_rx_mode
-+*----------------------------------------------------------------------*/
-+void mac_set_rx_mode(int pid, unsigned int data)
-+{
-+ unsigned int base;
-+
-+ base = (pid == 0) ? GMAC0_BASE : GMAC1_BASE;
-+
-+ gmac_write_reg(base, GMAC_RX_FLTR, data, 0x0000001f);
-+ return;
-+}
-+
-+
-+/*----------------------------------------------------------------------
-+* gmac_open
-+*----------------------------------------------------------------------*/
-+
-+static int gmac_open (struct net_device *dev)
-+{
-+ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
-+ int retval;
-+ TOE_INFO_T *toe;
-+ toe = (TOE_INFO_T *)&toe_private_data;
-+
-+ /* hook ISR */
-+ retval = request_irq (dev->irq, toe_gmac_interrupt, IRQF_DISABLED, dev->name, dev);
-+ if (retval)
-+ return retval;
-+
-+ toe_init_gmac(dev);
-+
-+ if(!FLAG_SWITCH)
-+ {
-+ init_waitqueue_head (&tp->thr_wait);
-+ init_completion(&tp->thr_exited);
-+
-+ tp->time_to_die = 0;
-+ tp->thr_pid = kernel_thread (gmac_phy_thread, dev, CLONE_FS | CLONE_FILES);
-+ if (tp->thr_pid < 0)
-+ {
-+ printk (KERN_WARNING "%s: unable to start kernel thread\n",dev->name);
-+ }
-+ }
-+
-+ tp->operation = 1;
-+
-+ netif_start_queue (dev);
-+
-+ return (0);
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_close
-+*----------------------------------------------------------------------*/
-+static int gmac_close(struct net_device *dev)
-+{
-+ TOE_INFO_T *toe;
-+// GMAC_RXDESC_T *sw_desc_ptr,*desc_ptr;
-+// unsigned int buf_ptr;
-+ GMAC_INFO_T *tp = dev->priv;
-+ unsigned int ret;
-+
-+ toe = (TOE_INFO_T *)&toe_private_data;
-+
-+ tp->operation = 0;
-+
-+ netif_stop_queue(dev);
-+ mdelay(20);
-+
-+ /* stop tx/rx packet */
-+ toe_gmac_disable_tx_rx(dev);
-+ mdelay(20);
-+
-+ /* stop the chip's Tx and Rx DMA processes */
-+ toe_gmac_hw_stop(dev);
-+
-+ toe_gmac_disable_interrupt(tp->irq);
-+
-+ /* disable interrupts by clearing the interrupt mask */
-+ synchronize_irq();
-+ free_irq(dev->irq,dev);
-+
-+// DMA_MFREE(sw_desc_ptr, (TOE_SW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T),(dma_addr_t *)&toe->sw_freeq_desc_base_dma);
-+// DMA_MFREE(desc_ptr, TOE_HW_FREEQ_DESC_NUM * sizeof(GMAC_RXDESC_T),(dma_addr_t *)&toe->hw_freeq_desc_base_dma);
-+// DMA_MFREE(buf_ptr, TOE_HW_FREEQ_DESC_NUM) * HW_RX_BUF_SIZE),(dma_addr_t *)&toe->hwfq_buf_base_dma);
-+// DMA_MFREE(toe->gmac[0].swtxq_desc_base , TOE_GMAC0_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[0].swtxq_desc_base_dma);
-+// DMA_MFREE(toe->gmac[1].swtxq_desc_base , TOE_GMAC0_SWTXQ_DESC_NUM * TOE_SW_TXQ_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[1].swtxq_desc_base_dma);
-+// DMA_MFREE(toe->gmac[0].hwtxq_desc_base_dma , TOE_GMAC0_HWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[0].hwtxq_desc_base_dma);
-+// DMA_MFREE(toe->gmac[1].hwtxq_desc_base_dma , TOE_GMAC0_SWTXQ_DESC_NUM * TOE_HW_TXQ_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[1].hwtxq_desc_base_dma);
-+// DMA_MFREE(toe->gmac[0].default_desc_base_dma ,TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[0].default_desc_base_dma);
-+// DMA_MFREE(toe->gmac[1].default_desc_base_dma , TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_TXDESC_T),(dma_addr_t *)&toe->gmac[1].default_desc_base_dma);
-+// DMA_MFREE(toe->intr_desc_base_dma , TOE_INTR_QUEUE_NUM * TOE_INTR_DESC_NUM * sizeof(GMAC_RXDESC_T),(dma_addr_t *)&toe->intr_desc_base_dma);
-+// DMA_MFREE(toe->intr_buf_base_dma , TOE_INTR_DESC_NUM * sizeof(TOE_QHDR_T),(dma_addr_t *)&toe->intr_buf_base_dma);
-+
-+ if(!FLAG_SWITCH)
-+ {
-+ if (tp->thr_pid >= 0)
-+ {
-+ tp->time_to_die = 1;
-+ wmb();
-+ ret = kill_proc (tp->thr_pid, SIGTERM, 1);
-+ if (ret)
-+ {
-+ printk (KERN_ERR "%s: unable to signal thread\n", dev->name);
-+ return ret;
-+ }
-+// wait_for_completion (&tp->thr_exited);
-+ }
-+ }
-+
-+ return (0);
-+}
-+
-+/*----------------------------------------------------------------------
-+* toe_gmac_fill_free_q
-+* allocate buffers for free queue.
-+*----------------------------------------------------------------------*/
-+static inline void toe_gmac_fill_free_q(void)
-+{
-+ struct sk_buff *skb;
-+ volatile DMA_RWPTR_T fq_rwptr;
-+ volatile GMAC_RXDESC_T *fq_desc;
-+ unsigned long flags;
-+ // unsigned short max_cnt=TOE_SW_FREEQ_DESC_NUM>>1;
-+
-+ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+ spin_lock_irqsave(&gmac_fq_lock, flags);
-+ //while ((max_cnt--) && (unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
-+ // TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) {
-+ while ((unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
-+ TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) {
-+ if ((skb = dev_alloc_skb(SW_RX_BUF_SIZE)) == NULL) {
-+ printk("%s::skb allocation fail!\n", __func__);
-+ //while(1);
-+ break;
-+ }
-+ REG32(skb->data) = (unsigned int)skb;
-+ skb_reserve(skb, SKB_RESERVE_BYTES);
-+ // fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+ fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
-+ TOE_SW_FREEQ_DESC_NUM);
-+ fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base+fq_rwptr.bits.wptr;
-+ fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
-+ SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
-+ toe_private_data.fq_rx_rwptr.bits32 = fq_rwptr.bits32;
-+ }
-+ spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+}
-+// EXPORT_SYMBOL(toe_gmac_fill_free_q);
-+
-+/*----------------------------------------------------------------------
-+* toe_gmac_interrupt
-+*----------------------------------------------------------------------*/
-+static irqreturn_t toe_gmac_interrupt (int irq, void *dev_instance)
-+{
-+ struct net_device *dev = (struct net_device *)dev_instance;
-+ TOE_INFO_T *toe;
-+ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
-+ unsigned int status0;
-+ unsigned int status1;
-+ unsigned int status2;
-+ unsigned int status3;
-+ unsigned int status4;
-+
-+// struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
-+ toe = (TOE_INFO_T *)&toe_private_data;
-+// handle NAPI
-+#ifdef CONFIG_SL_NAPI
-+if (storlink_ctl.pauseoff == 1)
-+{
-+/* disable GMAC interrupt */
-+ //toe_gmac_disable_interrupt(tp->irq);
-+
-+// isPtr->interrupts++;
-+ /* read Interrupt status */
-+ status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
-+ status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
-+ status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
-+ status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
-+ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+ // prompt warning if status bit ON but not enabled
-+#if 0
-+ if (status0 & ~tp->intr0_enabled)
-+ printk("Intr 0 Status error. status = 0x%X, enable = 0x%X\n",
-+ status0, tp->intr0_enabled);
-+ if (status1 & ~tp->intr1_enabled)
-+ printk("Intr 1 Status error. status = 0x%X, enable = 0x%X\n",
-+ status1, tp->intr1_enabled);
-+ if (status2 & ~tp->intr2_enabled)
-+ printk("Intr 2 Status error. status = 0x%X, enable = 0x%X\n",
-+ status2, tp->intr2_enabled);
-+ if (status3 & ~tp->intr3_enabled)
-+ printk("Intr 3 Status error. status = 0x%X, enable = 0x%X\n",
-+ status3, tp->intr3_enabled);
-+ if (status4 & ~tp->intr4_enabled)
-+ printk("Intr 4 Status error. status = 0x%X, enable = 0x%X\n",
-+ status4, tp->intr4_enabled);
-+#endif
-+
-+ if (status0)
-+ writel(status0 & tp->intr0_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_0_REG);
-+ if (status1)
-+ writel(status1 & tp->intr1_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_1_REG);
-+ if (status2)
-+ writel(status2 & tp->intr2_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_2_REG);
-+ if (status3)
-+ writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG);
-+ if (status4)
-+ writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
-+#if 0
-+ /* handle freeq interrupt first */
-+ if (status4 & tp->intr4_enabled) {
-+ if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
-+ {
-+ // unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+ //gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
-+ // tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
-+
-+ if (toe->gmac[0].dev && netif_running(toe->gmac[0].dev))
-+ toe_gmac_handle_default_rxq(toe->gmac[0].dev,&toe->gmac[0]);
-+ if (toe->gmac[1].dev && netif_running(toe->gmac[1].dev))
-+ toe_gmac_handle_default_rxq(toe->gmac[1].dev,&toe->gmac[1]);
-+ printk("\nfreeq int\n");
-+ toe_gmac_fill_free_q();
-+ tp->sw_fq_empty_cnt++;
-+
-+ }
-+ }
-+#endif
-+ // Interrupt Status 1
-+ if (status1 & tp->intr1_enabled)
-+ {
-+ #define G1_INTR0_BITS (GMAC1_HWTQ13_EOF_INT_BIT | GMAC1_HWTQ12_EOF_INT_BIT | GMAC1_HWTQ11_EOF_INT_BIT | GMAC1_HWTQ10_EOF_INT_BIT)
-+ #define G0_INTR0_BITS (GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT | GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT)
-+ // Handle GMAC 0/1 HW Tx queue 0-3 EOF events
-+ // Only count
-+ // TOE, Classification, and default queues interrupts are handled by ISR
-+ // because they should pass packets to upper layer
-+ if (tp->port_id == 0)
-+ {
-+ if (netif_running(dev) && (status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS))
-+ {
-+ if (status1 & GMAC0_HWTQ03_EOF_INT_BIT)
-+ tp->hwtxq[3].eof_cnt++;
-+ if (status1 & GMAC0_HWTQ02_EOF_INT_BIT)
-+ tp->hwtxq[2].eof_cnt++;
-+ if (status1 & GMAC0_HWTQ01_EOF_INT_BIT)
-+ tp->hwtxq[1].eof_cnt++;
-+ if (status1 & GMAC0_HWTQ00_EOF_INT_BIT)
-+ tp->hwtxq[0].eof_cnt++;
-+ }
-+ if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT))
-+ {
-+ if (likely(netif_rx_schedule_prep(dev)))
-+ {
-+ unsigned int data32;
-+ // disable GMAC-0 rx interrupt
-+ // class-Q & TOE-Q are implemented in future
-+ //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+ //data32 &= ~DEFAULT_Q0_INT_BIT;
-+ //writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+ //printk("\%s: DEFAULT_Q0_INT_BIT===================>>>>>>>>>>>>\n",__func__);
-+ writel(0x0, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
-+ //tp->total_q_cnt_napi=0;
-+ //rx_time = jiffies;
-+ //rx_old_bytes = isPtr->rx_bytes;
-+ __netif_rx_schedule(dev);
-+ }
-+ }
-+ }
-+ else if (tp->port_id == 1)
-+ {
-+ if (netif_running(dev) && (status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS))
-+ {
-+ if (status1 & GMAC1_HWTQ13_EOF_INT_BIT)
-+ tp->hwtxq[3].eof_cnt++;
-+ if (status1 & GMAC1_HWTQ12_EOF_INT_BIT)
-+ tp->hwtxq[2].eof_cnt++;
-+ if (status1 & GMAC1_HWTQ11_EOF_INT_BIT)
-+ tp->hwtxq[1].eof_cnt++;
-+ if (status1 & GMAC1_HWTQ10_EOF_INT_BIT)
-+ tp->hwtxq[0].eof_cnt++;
-+ }
-+
-+ if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
-+ {
-+ if (likely(netif_rx_schedule_prep(dev)))
-+ {
-+ unsigned int data32;
-+ // disable GMAC-0 rx interrupt
-+ // class-Q & TOE-Q are implemented in future
-+ //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+ //data32 &= ~DEFAULT_Q1_INT_BIT;
-+ //writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+ //printk("\%s: 1111111111--->DEFAULT_Q1_INT_BIT===================>>>>>>>>>>>>\n",__func__);
-+ writel(0x0, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
-+ //tp->total_q_cnt_napi=0;
-+ //rx_time = jiffies;
-+ //rx_old_bytes = isPtr->rx_bytes;
-+ __netif_rx_schedule(dev);
-+ }
-+ }
-+ }
-+ }
-+
-+ // Interrupt Status 0
-+ if (status0 & tp->intr0_enabled)
-+ {
-+ #define ERR_INTR_BITS (GMAC0_TXDERR_INT_BIT | GMAC0_TXPERR_INT_BIT | \
-+ GMAC1_TXDERR_INT_BIT | GMAC1_TXPERR_INT_BIT | \
-+ GMAC0_RXDERR_INT_BIT | GMAC0_RXPERR_INT_BIT | \
-+ GMAC1_RXDERR_INT_BIT | GMAC1_RXPERR_INT_BIT)
-+
-+ if (status0 & ERR_INTR_BITS)
-+ {
-+ if ((status0 & GMAC0_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXDERR_INT_BIT))
-+ {
-+ tp->txDerr_cnt[0]++;
-+ printk("GMAC0 TX AHB Bus Error!\n");
-+ }
-+ if ((status0 & GMAC0_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXPERR_INT_BIT))
-+ {
-+ tp->txPerr_cnt[0]++;
-+ printk("GMAC0 Tx Descriptor Protocol Error!\n");
-+ }
-+ if ((status0 & GMAC1_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXDERR_INT_BIT))
-+ {
-+ tp->txDerr_cnt[1]++;
-+ printk("GMAC1 Tx AHB Bus Error!\n");
-+ }
-+ if ((status0 & GMAC1_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXPERR_INT_BIT))
-+ {
-+ tp->txPerr_cnt[1]++;
-+ printk("GMAC1 Tx Descriptor Protocol Error!\n");
-+ }
-+
-+ if ((status0 & GMAC0_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXDERR_INT_BIT))
-+ {
-+ tp->RxDerr_cnt[0]++;
-+ printk("GMAC0 Rx AHB Bus Error!\n");
-+ }
-+ if ((status0 & GMAC0_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXPERR_INT_BIT))
-+ {
-+ tp->RxPerr_cnt[0]++;
-+ printk("GMAC0 Rx Descriptor Protocol Error!\n");
-+ }
-+ if ((status0 & GMAC1_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXDERR_INT_BIT))
-+ {
-+ tp->RxDerr_cnt[1]++;
-+ printk("GMAC1 Rx AHB Bus Error!\n");
-+ }
-+ if ((status0 & GMAC1_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXPERR_INT_BIT))
-+ {
-+ tp->RxPerr_cnt[1]++;
-+ printk("GMAC1 Rx Descriptor Protocol Error!\n");
-+ }
-+ }
-+
-+#ifndef GMAX_TX_INTR_DISABLED
-+ if (tp->port_id == 1 && netif_running(dev) &&
-+ (((status0 & GMAC1_SWTQ10_FIN_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_FIN_INT_BIT))
-+ ||
-+ ((status0 & GMAC1_SWTQ10_EOF_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_EOF_INT_BIT))))
-+ {
-+ toe_gmac_tx_complete(&toe_private_data.gmac[1], 0, dev, 1);
-+ }
-+
-+ if (tp->port_id == 0 && netif_running(dev) &&
-+ (((status0 & GMAC0_SWTQ00_FIN_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_FIN_INT_BIT))
-+ ||
-+ ((status0 & GMAC0_SWTQ00_EOF_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_EOF_INT_BIT))))
-+ {
-+ toe_gmac_tx_complete(&toe_private_data.gmac[0], 0, dev, 1);
-+ }
-+#endif
-+ }
-+ // Interrupt Status 4
-+ if (status4 & tp->intr4_enabled)
-+ {
-+ #define G1_INTR4_BITS (0xff000000)
-+ #define G0_INTR4_BITS (0x00ff0000)
-+
-+ if (tp->port_id == 0)
-+ {
-+ if ((status4 & G0_INTR4_BITS) && (tp->intr4_enabled & G0_INTR4_BITS))
-+ {
-+ if (status4 & GMAC0_RESERVED_INT_BIT)
-+ printk("GMAC0_RESERVED_INT_BIT is ON\n");
-+ if (status4 & GMAC0_MIB_INT_BIT)
-+ tp->mib_full_cnt++;
-+ if (status4 & GMAC0_RX_PAUSE_ON_INT_BIT)
-+ tp->rx_pause_on_cnt++;
-+ if (status4 & GMAC0_TX_PAUSE_ON_INT_BIT)
-+ tp->tx_pause_on_cnt++;
-+ if (status4 & GMAC0_RX_PAUSE_OFF_INT_BIT)
-+ tp->rx_pause_off_cnt++;
-+ if (status4 & GMAC0_TX_PAUSE_OFF_INT_BIT)
-+ tp->rx_pause_off_cnt++;
-+ if (status4 & GMAC0_RX_OVERRUN_INT_BIT)
-+ tp->rx_overrun_cnt++;
-+ if (status4 & GMAC0_STATUS_CHANGE_INT_BIT)
-+ tp->status_changed_cnt++;
-+ }
-+ }
-+ else if (tp->port_id == 1)
-+ {
-+ if ((status4 & G1_INTR4_BITS) && (tp->intr4_enabled & G1_INTR4_BITS))
-+ {
-+ if (status4 & GMAC1_RESERVED_INT_BIT)
-+ printk("GMAC1_RESERVED_INT_BIT is ON\n");
-+ if (status4 & GMAC1_MIB_INT_BIT)
-+ tp->mib_full_cnt++;
-+ if (status4 & GMAC1_RX_PAUSE_ON_INT_BIT)
-+ {
-+ printk("Gmac pause on\n");
-+ tp->rx_pause_on_cnt++;
-+ }
-+ if (status4 & GMAC1_TX_PAUSE_ON_INT_BIT)
-+ {
-+ printk("Gmac pause on\n");
-+ tp->tx_pause_on_cnt++;
-+ }
-+ if (status4 & GMAC1_RX_PAUSE_OFF_INT_BIT)
-+ {
-+ printk("Gmac pause off\n");
-+ tp->rx_pause_off_cnt++;
-+ }
-+ if (status4 & GMAC1_TX_PAUSE_OFF_INT_BIT)
-+ {
-+ printk("Gmac pause off\n");
-+ tp->rx_pause_off_cnt++;
-+ }
-+ if (status4 & GMAC1_RX_OVERRUN_INT_BIT)
-+ {
-+ //printk("Gmac Rx Overrun \n");
-+ tp->rx_overrun_cnt++;
-+ }
-+ if (status4 & GMAC1_STATUS_CHANGE_INT_BIT)
-+ tp->status_changed_cnt++;
-+ }
-+ }
-+ }
-+
-+ //toe_gmac_enable_interrupt(tp->irq);
-+#ifdef IxscriptMate_1518
-+ if (storlink_ctl.pauseoff == 1)
-+ {
-+ GMAC_CONFIG0_T config0;
-+ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+ config0.bits.dis_rx = 0;
-+ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+ config0.bits.dis_rx = 0;
-+ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+ }
-+#endif
-+// enable_irq(gmac_irq[dev_index]);
-+ //printk("gmac_interrupt complete!\n\n");
-+// return IRQ_RETVAL(handled);
-+ return IRQ_RETVAL(1);
-+}
-+else
-+{
-+#endif //endif NAPI
-+
-+
-+ /* disable GMAC interrupt */
-+ toe_gmac_disable_interrupt(tp->irq);
-+
-+// isPtr->interrupts++;
-+ /* read Interrupt status */
-+ status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
-+ status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
-+ status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
-+ status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
-+ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+ // prompt warning if status bit ON but not enabled
-+#if 0
-+ if (status0 & ~tp->intr0_enabled)
-+ printk("Intr 0 Status error. status = 0x%X, enable = 0x%X\n",
-+ status0, tp->intr0_enabled);
-+ if (status1 & ~tp->intr1_enabled)
-+ printk("Intr 1 Status error. status = 0x%X, enable = 0x%X\n",
-+ status1, tp->intr1_enabled);
-+ if (status2 & ~tp->intr2_enabled)
-+ printk("Intr 2 Status error. status = 0x%X, enable = 0x%X\n",
-+ status2, tp->intr2_enabled);
-+ if (status3 & ~tp->intr3_enabled)
-+ printk("Intr 3 Status error. status = 0x%X, enable = 0x%X\n",
-+ status3, tp->intr3_enabled);
-+ if (status4 & ~tp->intr4_enabled)
-+ printk("Intr 4 Status error. status = 0x%X, enable = 0x%X\n",
-+ status4, tp->intr4_enabled);
-+#endif
-+#define INTERRUPT_SELECT 1
-+ if (status0)
-+ writel(status0 & tp->intr0_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_0_REG);
-+ if (status1)
-+ writel(status1 & tp->intr1_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_1_REG);
-+ if (status2)
-+ writel(status2 & tp->intr2_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_2_REG);
-+ if (status3)
-+ writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG);
-+ if (status4)
-+ writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
-+
-+ /* handle freeq interrupt first */
-+ if (status4 & tp->intr4_enabled) {
-+ if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
-+ {
-+ // unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+ //gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
-+ // tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
-+
-+ //gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG,
-+ // SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
-+ if (toe->gmac[0].dev && netif_running(toe->gmac[0].dev))
-+ toe_gmac_handle_default_rxq(toe->gmac[0].dev,&toe->gmac[0]);
-+ if (toe->gmac[1].dev && netif_running(toe->gmac[1].dev))
-+ toe_gmac_handle_default_rxq(toe->gmac[1].dev,&toe->gmac[1]);
-+ printk("\nfreeq int\n");
-+ toe_gmac_fill_free_q();
-+ tp->sw_fq_empty_cnt++;
-+
-+ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
-+ SWFQ_EMPTY_INT_BIT);
-+ }
-+ }
-+
-+ // Interrupt Status 1
-+ if (status1 & tp->intr1_enabled)
-+ {
-+ #define G1_INTR0_BITS (GMAC1_HWTQ13_EOF_INT_BIT | GMAC1_HWTQ12_EOF_INT_BIT | GMAC1_HWTQ11_EOF_INT_BIT | GMAC1_HWTQ10_EOF_INT_BIT)
-+ #define G0_INTR0_BITS (GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT | GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT)
-+ // Handle GMAC 0/1 HW Tx queue 0-3 EOF events
-+ // Only count
-+ // TOE, Classification, and default queues interrupts are handled by ISR
-+ // because they should pass packets to upper layer
-+ if (tp->port_id == 0)
-+ {
-+#ifndef INTERRUPT_SELECT
-+ if (netif_running(dev) && (status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS))
-+ {
-+ if (status1 & GMAC0_HWTQ03_EOF_INT_BIT)
-+ tp->hwtxq[3].eof_cnt++;
-+ if (status1 & GMAC0_HWTQ02_EOF_INT_BIT)
-+ tp->hwtxq[2].eof_cnt++;
-+ if (status1 & GMAC0_HWTQ01_EOF_INT_BIT)
-+ tp->hwtxq[1].eof_cnt++;
-+ if (status1 & GMAC0_HWTQ00_EOF_INT_BIT)
-+ tp->hwtxq[0].eof_cnt++;
-+#endif //INTERRUPT_SELECT
-+#ifndef INTERRUPT_SELECT
-+ }
-+#endif //INTERRUPT_SELECT
-+ if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT))
-+ {
-+ tp->default_q_intr_cnt++;
-+ toe_gmac_handle_default_rxq(dev, tp);
-+ }
-+#ifdef CONFIG_SL351x_RXTOE
-+ if (netif_running(dev) && (status1 & TOE_IQ_ALL_BITS) &&
-+ (tp->intr1_enabled & TOE_IQ_ALL_BITS)) {
-+ //printk("status %x, bits %x, slct %x\n", status1, TOE_IQ_ALL_BITS, tp->intr1_selected);
-+ toe_gmac_handle_toeq(dev, tp, status1);
-+ //toe_gmac_handle_toeq(dev, toe, tp, status1);
-+ }
-+#endif
-+ }
-+ else if (tp->port_id == 1)
-+ {
-+#ifndef INTERRUPT_SELECT
-+ if (netif_running(dev) && (status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS))
-+ {
-+ if (status1 & GMAC1_HWTQ13_EOF_INT_BIT)
-+ tp->hwtxq[3].eof_cnt++;
-+ if (status1 & GMAC1_HWTQ12_EOF_INT_BIT)
-+ tp->hwtxq[2].eof_cnt++;
-+ if (status1 & GMAC1_HWTQ11_EOF_INT_BIT)
-+ tp->hwtxq[1].eof_cnt++;
-+ if (status1 & GMAC1_HWTQ10_EOF_INT_BIT)
-+ tp->hwtxq[0].eof_cnt++;
-+#endif //INTERRUPT_SELECT
-+#ifndef INTERRUPT_SELECT
-+ }
-+#endif //INTERRUPT_SELECT
-+ if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
-+ {
-+ tp->default_q_intr_cnt++;
-+ toe_gmac_handle_default_rxq(dev, tp);
-+ }
-+#ifdef CONFIG_SL351x_RXTOE
-+ if (netif_running(dev) && (status1 & TOE_IQ_ALL_BITS) &&
-+ (tp->intr1_enabled & TOE_IQ_ALL_BITS)) {
-+ //printk("status %x, bits %x, slct %x\n", status1, TOE_IQ_ALL_BITS, tp->intr1_selected);
-+ toe_gmac_handle_toeq(dev, tp, status1);
-+ //toe_gmac_handle_toeq(dev, toe, tp, status1);
-+ }
-+#endif
-+ }
-+ }
-+
-+
-+ // Interrupt Status 0
-+ if (status0 & tp->intr0_enabled)
-+ {
-+
-+ #define ERR_INTR_BITS (GMAC0_TXDERR_INT_BIT | GMAC0_TXPERR_INT_BIT | \
-+ GMAC1_TXDERR_INT_BIT | GMAC1_TXPERR_INT_BIT | \
-+ GMAC0_RXDERR_INT_BIT | GMAC0_RXPERR_INT_BIT | \
-+ GMAC1_RXDERR_INT_BIT | GMAC1_RXPERR_INT_BIT)
-+#ifndef INTERRUPT_SELECT
-+ if (status0 & ERR_INTR_BITS)
-+ {
-+ if ((status0 & GMAC0_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXDERR_INT_BIT))
-+ {
-+ tp->txDerr_cnt[0]++;
-+ printk("GMAC0 TX AHB Bus Error!\n");
-+ }
-+ if ((status0 & GMAC0_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXPERR_INT_BIT))
-+ {
-+ tp->txPerr_cnt[0]++;
-+ printk("GMAC0 Tx Descriptor Protocol Error!\n");
-+ }
-+ if ((status0 & GMAC1_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXDERR_INT_BIT))
-+ {
-+ tp->txDerr_cnt[1]++;
-+ printk("GMAC1 Tx AHB Bus Error!\n");
-+ }
-+ if ((status0 & GMAC1_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXPERR_INT_BIT))
-+ {
-+ tp->txPerr_cnt[1]++;
-+ printk("GMAC1 Tx Descriptor Protocol Error!\n");
-+ }
-+
-+ if ((status0 & GMAC0_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXDERR_INT_BIT))
-+ {
-+ tp->RxDerr_cnt[0]++;
-+ printk("GMAC0 Rx AHB Bus Error!\n");
-+ }
-+ if ((status0 & GMAC0_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXPERR_INT_BIT))
-+ {
-+ tp->RxPerr_cnt[0]++;
-+ printk("GMAC0 Rx Descriptor Protocol Error!\n");
-+ }
-+ if ((status0 & GMAC1_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXDERR_INT_BIT))
-+ {
-+ tp->RxDerr_cnt[1]++;
-+ printk("GMAC1 Rx AHB Bus Error!\n");
-+ }
-+ if ((status0 & GMAC1_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXPERR_INT_BIT))
-+ {
-+ tp->RxPerr_cnt[1]++;
-+ printk("GMAC1 Rx Descriptor Protocol Error!\n");
-+ }
-+ }
-+#endif //INTERRUPT_SELECT
-+#ifndef GMAX_TX_INTR_DISABLED
-+ if (tp->port_id == 1 && netif_running(dev) &&
-+ (((status0 & GMAC1_SWTQ10_FIN_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_FIN_INT_BIT))
-+ ||
-+ ((status0 & GMAC1_SWTQ10_EOF_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_EOF_INT_BIT))))
-+ {
-+ toe_gmac_tx_complete(&toe_private_data.gmac[1], 0, dev, 1);
-+ }
-+
-+ if (tp->port_id == 0 && netif_running(dev) &&
-+ (((status0 & GMAC0_SWTQ00_FIN_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_FIN_INT_BIT))
-+ ||
-+ ((status0 & GMAC0_SWTQ00_EOF_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_EOF_INT_BIT))))
-+ {
-+ toe_gmac_tx_complete(&toe_private_data.gmac[0], 0, dev, 1);
-+ }
-+#endif
-+ // clear enabled status bits
-+ }
-+ // Interrupt Status 4
-+#ifndef INTERRUPT_SELECT
-+ if (status4 & tp->intr4_enabled)
-+ {
-+ #define G1_INTR4_BITS (0xff000000)
-+ #define G0_INTR4_BITS (0x00ff0000)
-+
-+ if (tp->port_id == 0)
-+ {
-+ if ((status4 & G0_INTR4_BITS) && (tp->intr4_enabled & G0_INTR4_BITS))
-+ {
-+ if (status4 & GMAC0_RESERVED_INT_BIT)
-+ printk("GMAC0_RESERVED_INT_BIT is ON\n");
-+ if (status4 & GMAC0_MIB_INT_BIT)
-+ tp->mib_full_cnt++;
-+ if (status4 & GMAC0_RX_PAUSE_ON_INT_BIT)
-+ tp->rx_pause_on_cnt++;
-+ if (status4 & GMAC0_TX_PAUSE_ON_INT_BIT)
-+ tp->tx_pause_on_cnt++;
-+ if (status4 & GMAC0_RX_PAUSE_OFF_INT_BIT)
-+ tp->rx_pause_off_cnt++;
-+ if (status4 & GMAC0_TX_PAUSE_OFF_INT_BIT)
-+ tp->rx_pause_off_cnt++;
-+ if (status4 & GMAC0_RX_OVERRUN_INT_BIT)
-+ tp->rx_overrun_cnt++;
-+ if (status4 & GMAC0_STATUS_CHANGE_INT_BIT)
-+ tp->status_changed_cnt++;
-+ }
-+ }
-+ else if (tp->port_id == 1)
-+ {
-+ if ((status4 & G1_INTR4_BITS) && (tp->intr4_enabled & G1_INTR4_BITS))
-+ {
-+ if (status4 & GMAC1_RESERVED_INT_BIT)
-+ printk("GMAC1_RESERVED_INT_BIT is ON\n");
-+ if (status4 & GMAC1_MIB_INT_BIT)
-+ tp->mib_full_cnt++;
-+ if (status4 & GMAC1_RX_PAUSE_ON_INT_BIT)
-+ {
-+ //printk("Gmac pause on\n");
-+ tp->rx_pause_on_cnt++;
-+ }
-+ if (status4 & GMAC1_TX_PAUSE_ON_INT_BIT)
-+ {
-+ //printk("Gmac pause on\n");
-+ tp->tx_pause_on_cnt++;
-+ }
-+ if (status4 & GMAC1_RX_PAUSE_OFF_INT_BIT)
-+ {
-+ //printk("Gmac pause off\n");
-+ tp->rx_pause_off_cnt++;
-+ }
-+ if (status4 & GMAC1_TX_PAUSE_OFF_INT_BIT)
-+ {
-+ //printk("Gmac pause off\n");
-+ tp->rx_pause_off_cnt++;
-+ }
-+ if (status4 & GMAC1_RX_OVERRUN_INT_BIT)
-+ {
-+ //printk("Gmac Rx Overrun \n");
-+ tp->rx_overrun_cnt++;
-+ }
-+ if (status4 & GMAC1_STATUS_CHANGE_INT_BIT)
-+ tp->status_changed_cnt++;
-+ }
-+ }
-+#if 0
-+ if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
-+ {
-+ // unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+// mac_stop_rxdma(tp->sc);
-+ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
-+ tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
-+
-+ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG,
-+ SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
-+ toe_gmac_fill_free_q();
-+ tp->sw_fq_empty_cnt++;
-+
-+ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
-+ SWFQ_EMPTY_INT_BIT);
-+//#if 0
-+/* if (netif_running(dev))
-+ toe_gmac_handle_default_rxq(dev, tp);
-+ printk("SWFQ_EMPTY_INT_BIT is ON!\n"); // should not be happened */
-+//#endif
-+ }
-+#endif
-+ }
-+#endif //INTERRUPT_SELECT
-+ toe_gmac_enable_interrupt(tp->irq);
-+//enable gmac rx function when do RFC 2544
-+#ifdef IxscriptMate_1518
-+ if (storlink_ctl.pauseoff == 1)
-+ {
-+ GMAC_CONFIG0_T config0;
-+ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+ config0.bits.dis_rx = 0;
-+ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+ config0.bits.dis_rx = 0;
-+ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+ }
-+#endif
-+ //printk("gmac_interrupt complete!\n\n");
-+// return IRQ_RETVAL(handled);
-+ return IRQ_RETVAL(1);
-+#ifdef CONFIG_SL_NAPI
-+}
-+#endif
-+}
-+
-+/*----------------------------------------------------------------------
-+* toe_gmac_handle_default_rxq
-+* (1) Get rx Buffer for default Rx queue
-+* (2) notify or call upper-routine to handle it
-+* (3) get a new buffer and insert it into SW free queue
-+* (4) Note: The SW free queue Read-Write Pointer should be locked when accessing
-+*----------------------------------------------------------------------*/
-+//static inline void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp)
-+static void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp)
-+{
-+ TOE_INFO_T *toe;
-+ GMAC_RXDESC_T *curr_desc;
-+ struct sk_buff *skb;
-+ DMA_RWPTR_T rwptr;
-+ unsigned int pkt_size;
-+ int max_cnt;
-+ unsigned int desc_count;
-+ unsigned int good_frame, chksum_status, rx_status;
-+ struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
-+
-+//when do ixia RFC 2544 test and packet size is select 1518 bytes,disable gmace rx function immediately after one interrupt come in.
-+#ifdef IxscriptMate_1518
-+ if (storlink_ctl.pauseoff == 1)
-+ {
-+ GMAC_CONFIG0_T config0;
-+ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+ config0.bits.dis_rx = 1;
-+ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+ config0.bits.dis_rx = 1;
-+ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+ }
-+#endif
-+ rwptr.bits32 = readl(&tp->default_qhdr->word1);
-+#if 0
-+ if (rwptr.bits.rptr != tp->rx_rwptr.bits.rptr)
-+ {
-+ mac_stop_txdma((struct net_device *)tp->dev);
-+ printk("Default Queue HW RD ptr (0x%x) != SW RD Ptr (0x%x)\n",
-+ rwptr.bits32, tp->rx_rwptr.bits.rptr);
-+ while(1);
-+ }
-+#endif
-+ toe = (TOE_INFO_T *)&toe_private_data;
-+ max_cnt = DEFAULT_RXQ_MAX_CNT;
-+ while ((--max_cnt) && rwptr.bits.rptr != rwptr.bits.wptr)
-+// while (rwptr.bits.rptr != rwptr.bits.wptr)
-+ {
-+//if packet size is not 1518 for RFC 2544,enable gmac rx function.The other packet size have RX workaround.
-+#ifdef IxscriptMate_1518
-+ if (storlink_ctl.pauseoff == 1)
-+ {
-+ if (pkt_size != 1514)
-+ {
-+ GMAC_CONFIG0_T config0;
-+ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+ config0.bits.dis_rx = 0;
-+ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+ config0.bits.dis_rx = 0;
-+ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+ }
-+ }
-+#endif
-+ curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
-+// consistent_sync(curr_desc, sizeof(GMAC_RXDESC_T), PCI_DMA_FROMDEVICE);
-+ tp->default_q_cnt++;
-+ tp->rx_curr_desc = (unsigned int)curr_desc;
-+ rx_status = curr_desc->word0.bits.status;
-+ chksum_status = curr_desc->word0.bits.chksum_status;
-+ tp->rx_status_cnt[rx_status]++;
-+ tp->rx_chksum_cnt[chksum_status]++;
-+ pkt_size = curr_desc->word1.bits.byte_count; /*total byte count in a frame*/
-+ desc_count = curr_desc->word0.bits.desc_count; /* get descriptor count per frame */
-+ good_frame=1;
-+ if ((curr_desc->word0.bits32 & (GMAC_RXDESC_0_T_derr | GMAC_RXDESC_0_T_perr))
-+ || (pkt_size < 60)
-+ || (chksum_status & 0x4)
-+ || rx_status)
-+ {
-+ good_frame = 0;
-+ if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_derr)
-+ printk("%s::derr (GMAC-%d)!!!\n", __func__, tp->port_id);
-+ if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_perr)
-+ printk("%s::perr (GMAC-%d)!!!\n", __func__, tp->port_id);
-+ if (rx_status)
-+ {
-+ if (rx_status == 4 || rx_status == 7)
-+ isPtr->rx_crc_errors++;
-+// printk("%s::Status=%d (GMAC-%d)!!!\n", __func__, rx_status, tp->port_id);
-+ }
-+#ifdef SL351x_GMAC_WORKAROUND
-+ else if (pkt_size < 60)
-+ {
-+ if (tp->short_frames_cnt < GMAC_SHORT_FRAME_THRESHOLD)
-+ tp->short_frames_cnt++;
-+ if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
-+ {
-+ GMAC_CONFIG0_T config0;
-+ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+ config0.bits.dis_rx = 1;
-+ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+ config0.bits.dis_rx = 1;
-+ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+ }
-+ }
-+#endif
-+// if (chksum_status)
-+// printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
-+ skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
-+ dev_kfree_skb_irq(skb);
-+ }
-+ if (good_frame)
-+ {
-+ if (curr_desc->word0.bits.drop)
-+ printk("%s::Drop (GMAC-%d)!!!\n", __func__, tp->port_id);
-+// if (chksum_status)
-+// printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
-+
-+ /* get frame information from the first descriptor of the frame */
-+#ifdef SL351x_GMAC_WORKAROUND
-+ if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
-+ {
-+ GMAC_CONFIG0_T config0;
-+ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+ config0.bits.dis_rx = 0;
-+ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+ config0.bits.dis_rx = 0;
-+ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+ }
-+ tp->short_frames_cnt = 0;
-+#endif
-+ isPtr->rx_packets++;
-+ skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr - SKB_RESERVE_BYTES)));
-+ if (!skb)
-+ {
-+ printk("Fatal Error!!skb==NULL\n");
-+ goto next_rx;
-+ }
-+ tp->curr_rx_skb = skb;
-+ // consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE);
-+
-+ // curr_desc->word2.buf_adr = 0;
-+
-+ skb_reserve (skb, RX_INSERT_BYTES); /* 16 byte align the IP fields. */
-+ skb_put(skb, pkt_size);
-+ skb->dev = dev;
-+ if (chksum_status == RX_CHKSUM_IP_UDP_TCP_OK)
-+ {
-+ skb->ip_summed = CHECKSUM_UNNECESSARY;
-+#ifdef CONFIG_SL351x_NAT
-+ if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
-+ {
-+ struct iphdr *ip_hdr;
-+ ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
-+ sl351x_nat_input(skb,
-+ tp->port_id,
-+ (void *)curr_desc->word3.bits.l3_offset,
-+ (void *)curr_desc->word3.bits.l4_offset);
-+ }
-+#endif
-+ skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
-+#if 0
-+#ifdef CONFIG_SL351x_RXTOE
-+ if (storlink_ctl.rx_max_pktsize) {
-+ struct iphdr *ip_hdr;
-+ struct tcphdr *tcp_hdr;
-+ int ip_hdrlen;
-+
-+ ip_hdr = (struct iphdr*)&(skb->data[0]);
-+ if ((skb->protocol == __constant_htons(ETH_P_IP)) &&
-+ ((ip_hdr->protocol & 0x00ff) == IPPROTO_TCP)) {
-+ ip_hdrlen = ip_hdr->ihl << 2;
-+ tcp_hdr = (struct tcphdr*)&(skb->data[ip_hdrlen]);
-+ if (tcp_hdr->syn) {
-+ struct toe_conn* connection = init_toeq(ip_hdr->version,
-+ ip_hdr, tcp_hdr, toe, &(skb->data[0]) - 14);
-+ TCP_SKB_CB(skb)->connection = connection;
-+ // hash_dump_entry(TCP_SKB_CB(skb)->connection->hash_entry_index);
-+ // printk("%s::skb data %x, conn %x, mode %x\n",
-+ // __func__, skb->data, connection, connection->mode);
-+ }
-+ }
-+ }
-+#endif
-+#endif
-+ }
-+ else if (chksum_status == RX_CHKSUM_IP_OK_ONLY)
-+ {
-+ skb->ip_summed = CHECKSUM_UNNECESSARY;
-+#ifdef CONFIG_SL351x_NAT
-+ if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
-+ {
-+ struct iphdr *ip_hdr;
-+ //struct tcphdr *tcp_hdr;
-+ ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
-+ //tcp_hdr = (struct tcphdr *)&(skb->data[curr_desc->word3.bits.l4_offset]);
-+ if (ip_hdr->protocol == IPPROTO_UDP)
-+ {
-+ sl351x_nat_input(skb,
-+ tp->port_id,
-+ (void *)curr_desc->word3.bits.l3_offset,
-+ (void *)curr_desc->word3.bits.l4_offset);
-+ }
-+ else if (ip_hdr->protocol == IPPROTO_GRE)
-+ {
-+ sl351x_nat_input(skb,
-+ tp->port_id,
-+ (void *)curr_desc->word3.bits.l3_offset,
-+ (void *)curr_desc->word3.bits.l4_offset);
-+ }
-+ }
-+#endif
-+ skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
-+ }
-+ else
-+ {
-+ skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
-+ }
-+
-+ netif_rx(skb); /* socket rx */
-+ dev->last_rx = jiffies;
-+
-+ isPtr->rx_bytes += pkt_size;
-+
-+ }
-+
-+next_rx:
-+ // advance one for Rx default Q 0/1
-+ rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
-+ SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
-+ tp->rx_rwptr.bits32 = rwptr.bits32;
-+
-+ toe_gmac_fill_free_q();
-+ }
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_get_phy_vendor
-+*----------------------------------------------------------------------*/
-+static unsigned int gmac_get_phy_vendor(int phy_addr)
-+{
-+ unsigned int reg_val;
-+ reg_val=(mii_read(phy_addr,0x02) << 16) + mii_read(phy_addr,0x03);
-+ return reg_val;
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_set_phy_status
-+*----------------------------------------------------------------------*/
-+void gmac_set_phy_status(struct net_device *dev)
-+{
-+ GMAC_INFO_T *tp = dev->priv;
-+ GMAC_STATUS_T status;
-+ unsigned int reg_val, ability,wan_port_id;
-+ unsigned int i = 0;
-+
-+#ifdef VITESSE_G5SWITCH
-+ if((tp->port_id == GMAC_PORT1)&&(Giga_switch==1)){
-+#if 0
-+ rcv_mask = SPI_read(2,0,0x10); // Receive mask
-+ rcv_mask |= 0x4F;
-+ for(i=0;i<4;i++){
-+ reg_val = BIT(26)|(i<<21)|(10<<16);
-+ SPI_write(3,0,1,reg_val);
-+ msleep(10);
-+ reg_val = SPI_read(3,0,2);
-+ if(reg_val & 0x0c00){
-+ printk("Port%d:Giga mode\n",i);
-+ SPI_write(1,i,0x00,0x300701B1);
-+ SPI_write(1,i,0x00,0x10070181);
-+ switch_pre_link[i]=LINK_UP;
-+ switch_pre_speed[i]=GMAC_SPEED_1000;
-+ }
-+ else{
-+ reg_val = BIT(26)|(i<<21)|(5<<16);
-+ SPI_write(3,0,1,reg_val);
-+ msleep(10);
-+ ability = (reg_val = SPI_read(3,0,2)&0x5e0) >>5;
-+ if ((ability & 0x0C)) /* 100M full duplex */
-+ {
-+ SPI_write(1,i,0x00,0x30050472);
-+ SPI_write(1,i,0x00,0x10050442);
-+ printk("Port%d:100M\n",i);
-+ switch_pre_link[i]=LINK_UP;
-+ switch_pre_speed[i]=GMAC_SPEED_100;
-+ }
-+ else if((ability & 0x03)) /* 10M full duplex */
-+ {
-+ SPI_write(1,i,0x00,0x30050473);
-+ SPI_write(1,i,0x00,0x10050443);
-+ printk("Port%d:10M\n",i);
-+ switch_pre_link[i]=LINK_UP;
-+ switch_pre_speed[i]=GMAC_SPEED_10;
-+ }
-+ else{
-+ SPI_write(1,i,0x00,BIT(16)); // disable RX
-+ SPI_write(5,0,0x0E,BIT(i)); // dicard packet
-+ while((SPI_read(5,0,0x0C)&BIT(i))==0) // wait to be empty
-+ msleep(1);
-+
-+ SPI_write(1,i,0x00,0x20000030); // PORT_RST
-+ switch_pre_link[i]=LINK_DOWN;
-+ switch_pre_speed[i]=GMAC_SPEED_10;
-+ rcv_mask &= ~BIT(i);
-+ SPI_write(2,0,0x10,rcv_mask); // Disable Receive
-+ }
-+ }
-+ }
-+#endif
-+ gmac_get_switch_status(dev);
-+ gmac_write_reg(tp->base_addr, GMAC_STATUS, 0x7d, 0x0000007f);
-+// SPI_write(2,0,0x10,rcv_mask); // Enable Receive
-+ return ;
-+ }
-+#endif
-+
-+ reg_val = gmac_get_phy_vendor(tp->phy_addr);
-+ printk("GMAC-%d Addr %d Vendor ID: 0x%08x\n", tp->port_id, tp->phy_addr, reg_val);
-+
-+ switch (tp->phy_mode)
-+ {
-+ case GMAC_PHY_GMII:
-+ mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
-+ #ifdef CONFIG_SL3516_ASIC
-+ mii_write(tp->phy_addr,0x09,0x0300); /* advertise 1000M full/half duplex */
-+ #else
-+ mii_write(tp->phy_addr,0x09,0x0000); /* advertise no 1000M full/half duplex */
-+ #endif
-+ break;
-+ case GMAC_PHY_RGMII_100:
-+ mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
-+ mii_write(tp->phy_addr,0x09,0x0000); /* advertise no 1000M */
-+ break;
-+ case GMAC_PHY_RGMII_1000:
-+ mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
-+ #ifdef CONFIG_SL3516_ASIC
-+ mii_write(tp->phy_addr,0x09,0x0300); /* advertise 1000M full/half duplex */
-+ #else
-+ mii_write(tp->phy_addr,0x09,0x0000); /* advertise no 1000M full/half duplex */
-+ #endif
-+ break;
-+ case GMAC_PHY_MII:
-+ default:
-+ mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
-+ mii_write(tp->phy_addr,0x09,0x0000); /* advertise no 1000M */
-+ break;
-+ }
-+
-+ mii_write(tp->phy_addr,0x18,0x0041); // Phy active led
-+ if (tp->auto_nego_cfg)
-+ {
-+ reg_val = 0x1200 | (1 << 15);
-+ mii_write(tp->phy_addr,0x00,reg_val); /* Enable and Restart Auto-Negotiation */
-+ mdelay(500);
-+ reg_val &= ~(1 << 15);
-+ mii_write(tp->phy_addr, 0x00, reg_val);
-+ }
-+ else
-+ {
-+ reg_val = 0;
-+ reg_val |= (tp->full_duplex_cfg) ? (1 << 8) : 0;
-+ reg_val |= (tp->speed_cfg == GMAC_SPEED_1000) ? (1 << 6) : 0;
-+ reg_val |= (tp->speed_cfg == GMAC_SPEED_100) ? (1 << 13) : 0;
-+ mii_write(tp->phy_addr, 0x00, reg_val);
-+ mdelay(100);
-+
-+ reg_val |= (1 << 15); // Reset PHY;
-+ mii_write(tp->phy_addr, 0x00, reg_val);
-+ }
-+
-+ status.bits32 = 0;
-+ /* set PHY operation mode */
-+ status.bits.mii_rmii = tp->phy_mode;
-+ status.bits.reserved = 1;
-+ mdelay(100);
-+ while (((reg_val=mii_read(tp->phy_addr,0x01)) & 0x00000004)!=0x04)
-+ {
-+ msleep(100);
-+ i++;
-+ if (i > 30)
-+ break;
-+ }
-+ if (i>30)
-+ {
-+ tp->pre_phy_status = LINK_DOWN;
-+ status.bits.link = LINK_DOWN;
-+ // clear_bit(__LINK_STATE_START, &dev->state);
-+ printk("Link Down (0x%04x) ", reg_val);
-+ if(Giga_switch == 1)
-+ {
-+ wan_port_id = 1;
-+#ifdef CONFIG_SL351x_SYSCTL
-+ storlink_ctl.link[ wan_port_id] = 0;
-+#endif
-+ }
-+ else
-+ {
-+#ifdef CONFIG_SL351x_SYSCTL
-+ storlink_ctl.link[ tp->port_id] = 0;
-+#endif
-+ }
-+ }
-+ else
-+ {
-+ tp->pre_phy_status = LINK_UP;
-+ status.bits.link = LINK_UP;
-+ // set_bit(__LINK_STATE_START, &dev->state);
-+ printk("Link Up (0x%04x) ",reg_val);
-+ if(Giga_switch == 1)
-+ {
-+ wan_port_id = 1;
-+#ifdef CONFIG_SL351x_SYSCTL
-+ storlink_ctl.link[ wan_port_id] = 1;
-+#endif
-+ }
-+ else
-+ {
-+#ifdef CONFIG_SL351x_SYSCTL
-+ storlink_ctl.link[ tp->port_id] = 1;
-+#endif
-+ }
-+ }
-+ // value = mii_read(PHY_ADDR,0x05);
-+
-+ ability = (mii_read(tp->phy_addr,0x05) & 0x05E0) >> 5;
-+
-+ //#ifdef CONFIG_SL3516_ASIC
-+ reg_val = mii_read(tp->phy_addr,10);
-+ printk("MII REG 10 = 0x%x\n",reg_val);
-+
-+ if ((reg_val & 0x0800) == 0x0800)
-+ {
-+ status.bits.duplex = 1;
-+ status.bits.speed = 2;
-+ if (status.bits.mii_rmii == GMAC_PHY_RGMII_100)
-+ status.bits.mii_rmii = GMAC_PHY_RGMII_1000;
-+
-+ printk(" 1000M/Full \n");
-+ }
-+ else if ((reg_val & 0x0400) == 0x0400)
-+ {
-+ status.bits.duplex = 0;
-+ status.bits.speed = 2;
-+ if (status.bits.mii_rmii == GMAC_PHY_RGMII_100)
-+ status.bits.mii_rmii = GMAC_PHY_RGMII_1000;
-+
-+ printk(" 1000M/Half \n");
-+ }
-+ //#endif
-+ else
-+ {
-+ #ifdef CONFIG_SL3516_ASIC
-+ if (status.bits.mii_rmii == GMAC_PHY_RGMII_1000)
-+ status.bits.mii_rmii = GMAC_PHY_RGMII_100;
-+ #endif
-+ printk("MII REG 5 (bit 5:15) = 0x%x\n", ability);
-+ if ((ability & 0x08)==0x08) /* 100M full duplex */
-+ {
-+ status.bits.duplex = 1;
-+ status.bits.speed = 1;
-+ printk(" 100M/Full\n");
-+
-+ }
-+ else if ((ability & 0x04)==0x04) /* 100M half duplex */
-+ {
-+ status.bits.duplex = 0;
-+ status.bits.speed = 1;
-+ printk(" 100M/Half\n");
-+
-+ }
-+ else if ((ability & 0x02)==0x02) /* 10M full duplex */
-+ {
-+ status.bits.duplex = 1;
-+ status.bits.speed = 0;
-+ printk(" 10M/Full\n");
-+
-+ }
-+ else if ((ability & 0x01)==0x01) /* 10M half duplex */
-+ {
-+ status.bits.duplex = 0;
-+ status.bits.speed = 0;
-+ printk(" 10M/Half\n");
-+
-+ }
-+ }
-+ if ((ability & 0x20)==0x20)
-+ {
-+ tp->flow_control_enable = 1;
-+ printk("Flow Control Enable.\n");
-+ }
-+ else
-+ {
-+ tp->flow_control_enable = 0;
-+ printk("Flow Control Disable.\n");
-+ }
-+ tp->full_duplex_status = status.bits.duplex;
-+ tp->speed_status = status.bits.speed;
-+ if (!tp->auto_nego_cfg)
-+ {
-+ status.bits.duplex = tp->full_duplex_cfg;
-+ status.bits.speed = tp->speed_cfg;
-+ }
-+ toe_gmac_disable_tx_rx(dev);
-+ mdelay(10);
-+ gmac_write_reg(tp->base_addr, GMAC_STATUS, status.bits32, 0x0000007f);
-+ toe_gmac_enable_tx_rx(dev);
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_phy_thread
-+*----------------------------------------------------------------------*/
-+static int gmac_phy_thread (void *data)
-+{
-+ struct net_device *dev = data;
-+ GMAC_INFO_T *tp = dev->priv;
-+ unsigned long timeout;
-+
-+ daemonize("%s", dev->name);
-+ allow_signal(SIGTERM);
-+// reparent_to_init();
-+// spin_lock_irq(&current->sigmask_lock);
-+// sigemptyset(&current->blocked);
-+// recalc_sigpending(current);
-+// spin_unlock_irq(&current->sigmask_lock);
-+// strncpy (current->comm, dev->name, sizeof(current->comm) - 1);
-+// current->comm[sizeof(current->comm) - 1] = '\0';
-+
-+ while (1)
-+ {
-+ timeout = next_tick;
-+ do
-+ {
-+ timeout = interruptible_sleep_on_timeout (&tp->thr_wait, timeout);
-+ } while (!signal_pending (current) && (timeout > 0));
-+
-+ if (signal_pending (current))
-+ {
-+// spin_lock_irq(&current->sigmask_lock);
-+ flush_signals(current);
-+// spin_unlock_irq(&current->sigmask_lock);
-+ }
-+
-+ if (tp->time_to_die)
-+ break;
-+
-+ // printk("%s : Polling MAC %d PHY Status...\n",__func__, tp->port_id);
-+ rtnl_lock ();
-+ if (tp->auto_nego_cfg){
-+#ifdef VITESSE_G5SWITCH
-+ if((tp->port_id == GMAC_PORT1)&&(Giga_switch==1))
-+ gmac_get_switch_status(dev);
-+ else
-+#endif
-+ gmac_get_phy_status(dev); //temp remove
-+ }
-+ rtnl_unlock ();
-+ }
-+ complete_and_exit (&tp->thr_exited, 0);
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_get_switch_status
-+*----------------------------------------------------------------------*/
-+#ifdef VITESSE_G5SWITCH
-+void gmac_get_switch_status(struct net_device *dev)
-+{
-+ GMAC_INFO_T *tp = dev->priv;
-+ GMAC_CONFIG0_T config0,config0_mask;
-+ unsigned int switch_port_id;
-+ int get_link=0;
-+
-+ get_link = Get_Set_port_status();
-+ if(get_link){ // link
-+ if(ever_dwon){
-+ ever_dwon = 0;
-+ toe_gmac_enable_tx_rx(dev);
-+ netif_wake_queue(dev);
-+ set_bit(__LINK_STATE_START, &dev->state);
-+ }
-+ }
-+ else{ // all down
-+ //printk("All link down\n");
-+ ever_dwon=1;
-+ netif_stop_queue(dev);
-+ toe_gmac_disable_tx_rx(dev);
-+ clear_bit(__LINK_STATE_START, &dev->state);
-+ }
-+
-+ if ( tp->port_id == 1 )
-+ switch_port_id = 0;
-+#ifdef CONFIG_SL351x_SYSCTL
-+ if (get_link)
-+ {
-+ storlink_ctl.link[switch_port_id] = 1;
-+ }
-+ else
-+ {
-+ storlink_ctl.link[switch_port_id] = 0;
-+ }
-+ if (storlink_ctl.pauseoff == 1)
-+ {
-+ if (tp->flow_control_enable == 1)
-+ {
-+ config0.bits32 = 0;
-+ config0_mask.bits32 = 0;
-+ config0.bits.tx_fc_en = 0; /* disable tx flow control */
-+ config0.bits.rx_fc_en = 0; /* disable rx flow control */
-+ config0_mask.bits.tx_fc_en = 1;
-+ config0_mask.bits.rx_fc_en = 1;
-+ gmac_write_reg(tp->base_addr, GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
-+ printk("Disable SWITCH Flow Control...\n");
-+ }
-+ tp->flow_control_enable = 0;
-+ }
-+ else
-+#endif
-+ {
-+ if (tp->flow_control_enable == 0)
-+ {
-+ config0.bits32 = 0;
-+ config0_mask.bits32 = 0;
-+ config0.bits.tx_fc_en = 1; /* enable tx flow control */
-+ config0.bits.rx_fc_en = 1; /* enable rx flow control */
-+ config0_mask.bits.tx_fc_en = 1;
-+ config0_mask.bits.rx_fc_en = 1;
-+ gmac_write_reg(tp->base_addr, GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
-+ printk("Enable SWITCH Flow Control...\n");
-+ }
-+ tp->flow_control_enable = 1;
-+ }
-+ return ;
-+
-+}
-+#endif
-+
-+/*----------------------------------------------------------------------
-+* gmac_get_phy_status
-+*----------------------------------------------------------------------*/
-+void gmac_get_phy_status(struct net_device *dev)
-+{
-+ GMAC_INFO_T *tp = dev->priv;
-+ GMAC_CONFIG0_T config0,config0_mask;
-+ GMAC_STATUS_T status, old_status;
-+ unsigned int reg_val,ability,wan_port_id;
-+
-+ old_status.bits32 = status.bits32 = gmac_read_reg(tp->base_addr, GMAC_STATUS);
-+
-+
-+ /* read PHY status register */
-+ reg_val = mii_read(tp->phy_addr,0x01);
-+ if ((reg_val & 0x0024) == 0x0024) /* link is established and auto_negotiate process completed */
-+ {
-+ ability = (mii_read(tp->phy_addr,0x05) & 0x05E0) >> 5;
-+ /* read PHY Auto-Negotiation Link Partner Ability Register */
-+ #ifdef CONFIG_SL3516_ASIC
-+ reg_val = mii_read(tp->phy_addr,10);
-+ if ((reg_val & 0x0800) == 0x0800)
-+ {
-+ status.bits.duplex = 1;
-+ status.bits.speed = 2;
-+ if (status.bits.mii_rmii == GMAC_PHY_RGMII_100)
-+ status.bits.mii_rmii = GMAC_PHY_RGMII_1000;
-+ }
-+ else if ((reg_val & 0x0400) == 0x0400)
-+ {
-+ status.bits.duplex = 0;
-+ status.bits.speed = 2;
-+ if (status.bits.mii_rmii == GMAC_PHY_RGMII_100)
-+ status.bits.mii_rmii = GMAC_PHY_RGMII_1000;
-+ }
-+ else
-+ #endif
-+ {
-+ #ifdef CONFIG_SL3516_ASIC
-+ if (status.bits.mii_rmii == GMAC_PHY_RGMII_1000)
-+ status.bits.mii_rmii = GMAC_PHY_RGMII_100;
-+ #endif
-+ if ((ability & 0x08)==0x08) /* 100M full duplex */
-+ {
-+ status.bits.duplex = 1;
-+ status.bits.speed = 1;
-+ }
-+ else if ((ability & 0x04)==0x04) /* 100M half duplex */
-+ {
-+ status.bits.duplex = 0;
-+ status.bits.speed = 1;
-+ }
-+ else if ((ability & 0x02)==0x02) /* 10M full duplex */
-+ {
-+ status.bits.duplex = 1;
-+ status.bits.speed = 0;
-+ }
-+ else if ((ability & 0x01)==0x01) /* 10M half duplex */
-+ {
-+ status.bits.duplex = 0;
-+ status.bits.speed = 0;
-+ }
-+ }
-+ status.bits.link = LINK_UP; /* link up */
-+ if(Giga_switch==1)
-+ {
-+ wan_port_id = 1;
-+#ifdef CONFIG_SL351x_SYSCTL
-+ storlink_ctl.link[ wan_port_id] = 1;
-+ }
-+ else
-+ {
-+ storlink_ctl.link[ tp->port_id] = 1;
-+#endif
-+ }
-+ if ((ability & 0x20)==0x20)
-+ {
-+ if (tp->flow_control_enable == 0)
-+ {
-+ config0.bits32 = 0;
-+ config0_mask.bits32 = 0;
-+ config0.bits.tx_fc_en = 1; /* enable tx flow control */
-+ config0.bits.rx_fc_en = 1; /* enable rx flow control */
-+ config0_mask.bits.tx_fc_en = 1;
-+ config0_mask.bits.rx_fc_en = 1;
-+ gmac_write_reg(tp->base_addr, GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
-+ printk("GMAC-%d Flow Control Enable.\n", tp->port_id);
-+ }
-+ tp->flow_control_enable = 1;
-+ }
-+ else
-+ {
-+ if (tp->flow_control_enable == 1)
-+ {
-+ config0.bits32 = 0;
-+ config0_mask.bits32 = 0;
-+ config0.bits.tx_fc_en = 0; /* disable tx flow control */
-+ config0.bits.rx_fc_en = 0; /* disable rx flow control */
-+ config0_mask.bits.tx_fc_en = 1;
-+ config0_mask.bits.rx_fc_en = 1;
-+ gmac_write_reg(tp->base_addr, GMAC_CONFIG0,config0.bits32,config0_mask.bits32);
-+ printk("GMAC-%d Flow Control Disable.\n", tp->port_id);
-+ }
-+ tp->flow_control_enable = 0;
-+ }
-+
-+ if (tp->pre_phy_status == LINK_DOWN)
-+ {
-+ printk("GMAC-%d LINK_UP......\n",tp->port_id);
-+ tp->pre_phy_status = LINK_UP;
-+ }
-+ }
-+ else
-+ {
-+ status.bits.link = LINK_DOWN; /* link down */
-+ if(Giga_switch == 1)
-+ {
-+ wan_port_id = 1;
-+#ifdef CONFIG_SL351x_SYSCTL
-+ storlink_ctl.link[ wan_port_id] = 0;
-+ }
-+ else
-+ {
-+ storlink_ctl.link[ tp->port_id] = 0;
-+#endif
-+ }
-+ if (tp->pre_phy_status == LINK_UP)
-+ {
-+ printk("GMAC-%d LINK_Down......\n",tp->port_id);
-+ tp->pre_phy_status = LINK_DOWN;
-+ }
-+ }
-+
-+ tp->full_duplex_status = status.bits.duplex;
-+ tp->speed_status = status.bits.speed;
-+ if (!tp->auto_nego_cfg)
-+ {
-+ status.bits.duplex = tp->full_duplex_cfg;
-+ status.bits.speed = tp->speed_cfg;
-+ }
-+
-+ if (old_status.bits32 != status.bits32)
-+ {
-+ netif_stop_queue(dev);
-+ toe_gmac_disable_tx_rx(dev);
-+ clear_bit(__LINK_STATE_START, &dev->state);
-+ printk("GMAC-%d Change Status Bits 0x%x-->0x%x\n",tp->port_id, old_status.bits32, status.bits32);
-+ mdelay(10); // let GMAC consume packet
-+ gmac_write_reg(tp->base_addr, GMAC_STATUS, status.bits32, 0x0000007f);
-+ if (status.bits.link == LINK_UP)
-+ {
-+ toe_gmac_enable_tx_rx(dev);
-+ netif_wake_queue(dev);
-+ set_bit(__LINK_STATE_START, &dev->state);
-+ }
-+ }
-+}
-+
-+/***************************************/
-+/* define GPIO module base address */
-+/***************************************/
-+#define GPIO_BASE_ADDR (IO_ADDRESS(SL2312_GPIO_BASE))
-+#define GPIO_BASE_ADDR1 (IO_ADDRESS(SL2312_GPIO_BASE1))
-+
-+/* define GPIO pin for MDC/MDIO */
-+#ifdef CONFIG_SL3516_ASIC
-+#define H_MDC_PIN 22
-+#define H_MDIO_PIN 21
-+#define G_MDC_PIN 22
-+#define G_MDIO_PIN 21
-+#else
-+#define H_MDC_PIN 3
-+#define H_MDIO_PIN 2
-+#define G_MDC_PIN 0
-+#define G_MDIO_PIN 1
-+#endif
-+
-+//#define GPIO_MDC 0x80000000
-+//#define GPIO_MDIO 0x00400000
-+
-+static unsigned int GPIO_MDC = 0;
-+static unsigned int GPIO_MDIO = 0;
-+static unsigned int GPIO_MDC_PIN = 0;
-+static unsigned int GPIO_MDIO_PIN = 0;
-+
-+// For PHY test definition!!
-+#define LPC_EECK 0x02
-+#define LPC_EDIO 0x04
-+#define LPC_GPIO_SET 3
-+#define LPC_BASE_ADDR IO_ADDRESS(IT8712_IO_BASE)
-+#define inb_gpio(x) inb(LPC_BASE_ADDR + IT8712_GPIO_BASE + x)
-+#define outb_gpio(x, y) outb(y, LPC_BASE_ADDR + IT8712_GPIO_BASE + x)
-+
-+enum GPIO_REG
-+{
-+ GPIO_DATA_OUT = 0x00,
-+ GPIO_DATA_IN = 0x04,
-+ GPIO_PIN_DIR = 0x08,
-+ GPIO_BY_PASS = 0x0c,
-+ GPIO_DATA_SET = 0x10,
-+ GPIO_DATA_CLEAR = 0x14,
-+};
-+/***********************/
-+/* MDC : GPIO[31] */
-+/* MDIO: GPIO[22] */
-+/***********************/
-+
-+/***************************************************
-+* All the commands should have the frame structure:
-+*<PRE><ST><OP><PHYAD><REGAD><TA><DATA><IDLE>
-+****************************************************/
-+
-+/*****************************************************************
-+* Inject a bit to NWay register through CSR9_MDC,MDIO
-+*******************************************************************/
-+void mii_serial_write(char bit_MDO) // write data into mii PHY
-+{
-+#ifdef CONFIG_SL2312_LPC_IT8712
-+ unsigned char iomode,status;
-+
-+ iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
-+ iomode |= (LPC_EECK|LPC_EDIO) ; // Set EECK,EDIO,EECS output
-+ LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
-+
-+ if(bit_MDO)
-+ {
-+ status = inb_gpio( LPC_GPIO_SET);
-+ status |= LPC_EDIO ; //EDIO high
-+ outb_gpio(LPC_GPIO_SET, status);
-+ }
-+ else
-+ {
-+ status = inb_gpio( LPC_GPIO_SET);
-+ status &= ~(LPC_EDIO) ; //EDIO low
-+ outb_gpio(LPC_GPIO_SET, status);
-+ }
-+
-+ status |= LPC_EECK ; //EECK high
-+ outb_gpio(LPC_GPIO_SET, status);
-+
-+ status &= ~(LPC_EECK) ; //EECK low
-+ outb_gpio(LPC_GPIO_SET, status);
-+
-+#else
-+ unsigned int addr;
-+ unsigned int value;
-+
-+ addr = GPIO_BASE_ADDR + GPIO_PIN_DIR;
-+ value = readl(addr) | GPIO_MDC | GPIO_MDIO; /* set MDC/MDIO Pin to output */
-+ writel(value,addr);
-+ if(bit_MDO)
-+ {
-+ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+ writel(GPIO_MDIO,addr); /* set MDIO to 1 */
-+ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+ writel(GPIO_MDC,addr); /* set MDC to 1 */
-+ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+ writel(GPIO_MDC,addr); /* set MDC to 0 */
-+ }
-+ else
-+ {
-+ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+ writel(GPIO_MDIO,addr); /* set MDIO to 0 */
-+ addr = (GPIO_BASE_ADDR + GPIO_DATA_SET);
-+ writel(GPIO_MDC,addr); /* set MDC to 1 */
-+ addr = (GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+ writel(GPIO_MDC,addr); /* set MDC to 0 */
-+ }
-+
-+#endif
-+}
-+
-+/**********************************************************************
-+* read a bit from NWay register through CSR9_MDC,MDIO
-+***********************************************************************/
-+unsigned int mii_serial_read(void) // read data from mii PHY
-+{
-+#ifdef CONFIG_SL2312_LPC_IT8712
-+ unsigned char iomode,status;
-+ unsigned int value ;
-+
-+ iomode = LPCGetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET);
-+ iomode &= ~(LPC_EDIO) ; // Set EDIO input
-+ iomode |= (LPC_EECK) ; // Set EECK,EECS output
-+ LPCSetConfig(LDN_GPIO, 0xc8 + LPC_GPIO_SET, iomode);
-+
-+ status = inb_gpio( LPC_GPIO_SET);
-+ status |= LPC_EECK ; //EECK high
-+ outb_gpio(LPC_GPIO_SET, status);
-+
-+ status &= ~(LPC_EECK) ; //EECK low
-+ outb_gpio(LPC_GPIO_SET, status);
-+
-+ value = inb_gpio( LPC_GPIO_SET);
-+
-+ value = value>>2 ;
-+ value &= 0x01;
-+
-+ return value ;
-+
-+#else
-+ unsigned int *addr;
-+ unsigned int value;
-+
-+ addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_PIN_DIR);
-+ value = readl(addr) & ~GPIO_MDIO; //0xffbfffff; /* set MDC to output and MDIO to input */
-+ writel(value,addr);
-+
-+ addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_SET);
-+ writel(GPIO_MDC,addr); /* set MDC to 1 */
-+ addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_CLEAR);
-+ writel(GPIO_MDC,addr); /* set MDC to 0 */
-+
-+ addr = (unsigned int *)(GPIO_BASE_ADDR + GPIO_DATA_IN);
-+ value = readl(addr);
-+ value = (value & (1<<GPIO_MDIO_PIN)) >> GPIO_MDIO_PIN;
-+ return(value);
-+
-+#endif
-+}
-+
-+/***************************************
-+* preamble + ST
-+***************************************/
-+void mii_pre_st(void)
-+{
-+ unsigned char i;
-+
-+ for(i=0;i<32;i++) // PREAMBLE
-+ mii_serial_write(1);
-+ mii_serial_write(0); // ST
-+ mii_serial_write(1);
-+}
-+
-+
-+/******************************************
-+* Read MII register
-+* phyad -> physical address
-+* regad -> register address
-+***************************************** */
-+unsigned int mii_read(unsigned char phyad,unsigned char regad)
-+{
-+ unsigned int i,value;
-+ unsigned int bit;
-+
-+ if (phyad == GPHY_ADDR)
-+ {
-+ GPIO_MDC_PIN = G_MDC_PIN; /* assigned MDC pin for giga PHY */
-+ GPIO_MDIO_PIN = G_MDIO_PIN; /* assigned MDIO pin for giga PHY */
-+ }
-+ else
-+ {
-+ GPIO_MDC_PIN = H_MDC_PIN; /* assigned MDC pin for 10/100 PHY */
-+ GPIO_MDIO_PIN = H_MDIO_PIN; /* assigned MDIO pin for 10/100 PHY */
-+ }
-+ GPIO_MDC = (1<<GPIO_MDC_PIN);
-+ GPIO_MDIO = (1<<GPIO_MDIO_PIN);
-+
-+ mii_pre_st(); // PRE+ST
-+ mii_serial_write(1); // OP
-+ mii_serial_write(0);
-+
-+ for (i=0;i<5;i++) { // PHYAD
-+ bit= ((phyad>>(4-i)) & 0x01) ? 1 :0 ;
-+ mii_serial_write(bit);
-+ }
-+
-+ for (i=0;i<5;i++) { // REGAD
-+ bit= ((regad>>(4-i)) & 0x01) ? 1 :0 ;
-+ mii_serial_write(bit);
-+ }
-+
-+ mii_serial_read(); // TA_Z
-+// if((bit=mii_serial_read()) !=0 ) // TA_0
-+// {
-+// return(0);
-+// }
-+ value=0;
-+ for (i=0;i<16;i++) { // READ DATA
-+ bit=mii_serial_read();
-+ value += (bit<<(15-i)) ;
-+ }
-+
-+ mii_serial_write(0); // dumy clock
-+ mii_serial_write(0); // dumy clock
-+
-+ //printk("%s: phy_addr=0x%x reg_addr=0x%x value=0x%x \n",__func__,phyad,regad,value);
-+ return(value);
-+}
-+
-+/******************************************
-+* Write MII register
-+* phyad -> physical address
-+* regad -> register address
-+* value -> value to be write
-+***************************************** */
-+void mii_write(unsigned char phyad,unsigned char regad,unsigned int value)
-+{
-+ unsigned int i;
-+ char bit;
-+
-+ printk("%s: phy_addr=0x%x reg_addr=0x%x value=0x%x \n",__func__,phyad,regad,value);
-+ if (phyad == GPHY_ADDR)
-+ {
-+ GPIO_MDC_PIN = G_MDC_PIN; /* assigned MDC pin for giga PHY */
-+ GPIO_MDIO_PIN = G_MDIO_PIN; /* assigned MDIO pin for giga PHY */
-+ }
-+ else
-+ {
-+ GPIO_MDC_PIN = H_MDC_PIN; /* assigned MDC pin for 10/100 PHY */
-+ GPIO_MDIO_PIN = H_MDIO_PIN; /* assigned MDIO pin for 10/100 PHY */
-+ }
-+ GPIO_MDC = (1<<GPIO_MDC_PIN);
-+ GPIO_MDIO = (1<<GPIO_MDIO_PIN);
-+
-+ mii_pre_st(); // PRE+ST
-+ mii_serial_write(0); // OP
-+ mii_serial_write(1);
-+ for (i=0;i<5;i++) { // PHYAD
-+ bit= ((phyad>>(4-i)) & 0x01) ? 1 :0 ;
-+ mii_serial_write(bit);
-+ }
-+
-+ for (i=0;i<5;i++) { // REGAD
-+ bit= ((regad>>(4-i)) & 0x01) ? 1 :0 ;
-+ mii_serial_write(bit);
-+ }
-+ mii_serial_write(1); // TA_1
-+ mii_serial_write(0); // TA_0
-+
-+ for (i=0;i<16;i++) { // OUT DATA
-+ bit= ((value>>(15-i)) & 0x01) ? 1 : 0 ;
-+ mii_serial_write(bit);
-+ }
-+ mii_serial_write(0); // dumy clock
-+ mii_serial_write(0); // dumy clock
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_set_rx_mode
-+*----------------------------------------------------------------------*/
-+static void gmac_set_rx_mode(struct net_device *dev)
-+{
-+ GMAC_RX_FLTR_T filter;
-+ unsigned int mc_filter[2]; /* Multicast hash filter */
-+ int bit_nr;
-+ unsigned int i;
-+ GMAC_INFO_T *tp = dev->priv;
-+
-+// printk("%s : dev->flags = %x \n",__func__,dev->flags);
-+// dev->flags |= IFF_ALLMULTI; /* temp */
-+ filter.bits32 = 0;
-+ filter.bits.error = 0;
-+ if (dev->flags & IFF_PROMISC)
-+ {
-+ filter.bits.error = 1;
-+ filter.bits.promiscuous = 1;
-+ filter.bits.broadcast = 1;
-+ filter.bits.multicast = 1;
-+ filter.bits.unicast = 1;
-+ mc_filter[1] = mc_filter[0] = 0xffffffff;
-+ }
-+ else if (dev->flags & IFF_ALLMULTI)
-+ {
-+// filter.bits.promiscuous = 1;
-+ filter.bits.broadcast = 1;
-+ filter.bits.multicast = 1;
-+ filter.bits.unicast = 1;
-+ mc_filter[1] = mc_filter[0] = 0xffffffff;
-+ }
-+ else
-+ {
-+ struct dev_mc_list *mclist;
-+
-+// filter.bits.promiscuous = 1;
-+ filter.bits.broadcast = 1;
-+ filter.bits.multicast = 1;
-+ filter.bits.unicast = 1;
-+ mc_filter[1] = mc_filter[0] = 0;
-+ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;i++, mclist = mclist->next)
-+ {
-+ bit_nr = ether_crc(ETH_ALEN,mclist->dmi_addr) & 0x0000003f;
-+ if (bit_nr < 32)
-+ {
-+ mc_filter[0] = mc_filter[0] | (1<<bit_nr);
-+ }
-+ else
-+ {
-+ mc_filter[1] = mc_filter[1] | (1<<(bit_nr-32));
-+ }
-+ }
-+ }
-+ gmac_write_reg(tp->base_addr,GMAC_RX_FLTR,filter.bits32,0xffffffff); //chech base address!!!
-+ gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL0,mc_filter[0],0xffffffff);
-+ gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL1,mc_filter[1],0xffffffff);
-+ return;
-+}
-+
-+#ifdef CONFIG_SL_NAPI
-+/*----------------------------------------------------------------------
-+* gmac_rx_poll
-+*----------------------------------------------------------------------*/
-+static int gmac_rx_poll(struct net_device *dev, int *budget)
-+{
-+ TOE_INFO_T *toe;
-+ GMAC_RXDESC_T *curr_desc;
-+ struct sk_buff *skb;
-+ DMA_RWPTR_T rwptr;
-+ unsigned int pkt_size;
-+ unsigned int desc_count;
-+ unsigned int good_frame, chksum_status, rx_status;
-+ int rx_pkts_num = 0;
-+ int quota = min(dev->quota, *budget);
-+ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
-+ unsigned int status4;
-+ volatile DMA_RWPTR_T fq_rwptr;
-+ int max_cnt = TOE_SW_FREEQ_DESC_NUM;//TOE_SW_FREEQ_DESC_NUM = 64
-+ //unsigned long rx_old_bytes;
-+ struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
-+ //unsigned long long rx_time;
-+
-+
-+
-+#if 1
-+ if (do_again)
-+ {
-+ toe_gmac_fill_free_q();
-+ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+ //printk("\n%s:: do_again toe_gmac_fill_free_q =======>status4=0x%x =====fq_rwptr =0x%8x======>JKJKJKJKJKJKJKJKJ \n", __func__,status4,fq_rwptr.bits32);
-+ if (fq_rwptr.bits.wptr != fq_rwptr.bits.rptr)
-+ {
-+ //status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+ do_again =0;
-+ //netif_rx_complete(dev);
-+ gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4, 0x1);
-+ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+ rwptr.bits32 = readl(&tp->default_qhdr->word1);
-+ }
-+ else
-+ return 1;
-+ }
-+#endif
-+ rwptr.bits32 = readl(&tp->default_qhdr->word1);
-+#if 0
-+ if (rwptr.bits.rptr != tp->rx_rwptr.bits.rptr)
-+ {
-+ mac_stop_txdma((struct net_device *)tp->dev);
-+ printk("Default Queue HW RD ptr (0x%x) != SW RD Ptr (0x%x)\n",
-+ rwptr.bits32, tp->rx_rwptr.bits.rptr);
-+ while(1);
-+ }
-+#endif
-+ toe = (TOE_INFO_T *)&toe_private_data;
-+
-+ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+ //printk("%s:---Before-------------->Default Queue HW RW ptr (0x%8x), fq_rwptr =0x%8x \n",__func__,rwptr.bits32,fq_rwptr.bits32 );
-+ //printk("%s:---Before while rx_pkts_num=%d------rx_finished_idx=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rx_finished_idx,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
-+// while ((--max_cnt) && (rwptr.bits.rptr != rwptr.bits.wptr) && (rx_pkts_num < quota))
-+
-+ while ((rwptr.bits.rptr != rwptr.bits.wptr) && (rx_pkts_num < quota))
-+ {
-+
-+ curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
-+ tp->default_q_cnt++;
-+ tp->rx_curr_desc = (unsigned int)curr_desc;
-+ rx_status = curr_desc->word0.bits.status;
-+ chksum_status = curr_desc->word0.bits.chksum_status;
-+ tp->rx_status_cnt[rx_status]++;
-+ tp->rx_chksum_cnt[chksum_status]++;
-+ pkt_size = curr_desc->word1.bits.byte_count; /*total byte count in a frame*/
-+ desc_count = curr_desc->word0.bits.desc_count; /* get descriptor count per frame */
-+ good_frame=1;
-+ if ((curr_desc->word0.bits32 & (GMAC_RXDESC_0_T_derr | GMAC_RXDESC_0_T_perr))
-+ || (pkt_size < 60)
-+ || (chksum_status & 0x4)
-+ || rx_status )
-+// || rx_status || (rwptr.bits.rptr > rwptr.bits.wptr ))
-+ {
-+ good_frame = 0;
-+ if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_derr)
-+ printk("%s::derr (GMAC-%d)!!!\n", __func__, tp->port_id);
-+ if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_perr)
-+ printk("%s::perr (GMAC-%d)!!!\n", __func__, tp->port_id);
-+ if (rx_status)
-+ {
-+ if (rx_status == 4 || rx_status == 7)
-+ isPtr->rx_crc_errors++;
-+// printk("%s::Status=%d (GMAC-%d)!!!\n", __func__, rx_status, tp->port_id);
-+ }
-+#ifdef SL351x_GMAC_WORKAROUND
-+ else if (pkt_size < 60)
-+ {
-+ if (tp->short_frames_cnt < GMAC_SHORT_FRAME_THRESHOLD)
-+ tp->short_frames_cnt++;
-+ if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
-+ {
-+ GMAC_CONFIG0_T config0;
-+ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+ config0.bits.dis_rx = 1;
-+ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+ config0.bits.dis_rx = 1;
-+ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+ }
-+ }
-+#endif
-+// if (chksum_status)
-+// printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
-+ skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
-+ dev_kfree_skb_irq(skb);
-+ }
-+ if (good_frame)
-+ {
-+ if (curr_desc->word0.bits.drop)
-+ printk("%s::Drop (GMAC-%d)!!!\n", __func__, tp->port_id);
-+// if (chksum_status)
-+// printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
-+
-+#ifdef SL351x_GMAC_WORKAROUND
-+ if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
-+ {
-+ GMAC_CONFIG0_T config0;
-+ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+ config0.bits.dis_rx = 0;
-+ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+ config0.bits.dis_rx = 0;
-+ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+ }
-+ tp->short_frames_cnt = 0;
-+#endif
-+ /* get frame information from the first descriptor of the frame */
-+ isPtr->rx_packets++;
-+ //consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE);
-+ skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
-+ tp->curr_rx_skb = skb;
-+ // curr_desc->word2.buf_adr = 0;
-+
-+ //skb_reserve (skb, SKB_RESERVE_BYTES);
-+ skb_reserve (skb, RX_INSERT_BYTES); /* 2 byte align the IP fields. */
-+ //if ((skb->tail+pkt_size) > skb->end )
-+ //printk("%s::------------->Here skb->len=%d,pkt_size= %d,skb->head=0x%x,skb->tail= 0x%x, skb->end= 0x%x\n", __func__, skb->len, pkt_size,skb->head,skb->tail,skb->end);
-+ skb_put(skb, pkt_size);
-+
-+
-+ skb->dev = dev;
-+ if (chksum_status == RX_CHKSUM_IP_UDP_TCP_OK)
-+ {
-+ skb->ip_summed = CHECKSUM_UNNECESSARY;
-+#ifdef CONFIG_SL351x_NAT
-+ if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
-+ {
-+ struct iphdr *ip_hdr;
-+ ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
-+ sl351x_nat_input(skb,
-+ tp->port_id,
-+ (void *)curr_desc->word3.bits.l3_offset,
-+ (void *)curr_desc->word3.bits.l4_offset);
-+ }
-+#endif
-+ skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
-+#if 0
-+#ifdef CONFIG_SL351x_RXTOE
-+ if (storlink_ctl.rx_max_pktsize) {
-+ struct iphdr *ip_hdr;
-+ struct tcphdr *tcp_hdr;
-+ int ip_hdrlen;
-+
-+ ip_hdr = (struct iphdr*)&(skb->data[0]);
-+ if ((skb->protocol == __constant_htons(ETH_P_IP)) &&
-+ ((ip_hdr->protocol & 0x00ff) == IPPROTO_TCP)) {
-+ ip_hdrlen = ip_hdr->ihl << 2;
-+ tcp_hdr = (struct tcphdr*)&(skb->data[ip_hdrlen]);
-+ if (tcp_hdr->syn) {
-+ struct toe_conn* connection = init_toeq(ip_hdr->version,
-+ ip_hdr, tcp_hdr, toe, &(skb->data[0]) - 14);
-+ TCP_SKB_CB(skb)->connection = connection;
-+ // hash_dump_entry(TCP_SKB_CB(skb)->connection->hash_entry_index);
-+ // printk("%s::skb data %x, conn %x, mode %x\n",
-+ // __func__, skb->data, connection, connection->mode);
-+ }
-+ }
-+ }
-+#endif
-+#endif
-+ }
-+ else if (chksum_status == RX_CHKSUM_IP_OK_ONLY)
-+ {
-+ skb->ip_summed = CHECKSUM_UNNECESSARY;
-+#ifdef CONFIG_SL351x_NAT
-+ if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
-+ {
-+ struct iphdr *ip_hdr;
-+ ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
-+ if (ip_hdr->protocol == IPPROTO_UDP)
-+ {
-+ sl351x_nat_input(skb,
-+ tp->port_id,
-+ (void *)curr_desc->word3.bits.l3_offset,
-+ (void *)curr_desc->word3.bits.l4_offset);
-+ }
-+ else if (ip_hdr->protocol == IPPROTO_GRE)
-+ {
-+ sl351x_nat_input(skb,
-+ tp->port_id,
-+ (void *)curr_desc->word3.bits.l3_offset,
-+ (void *)curr_desc->word3.bits.l4_offset);
-+ }
-+ }
-+#endif
-+ skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
-+ }
-+ else
-+ {
-+ skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
-+ }
-+ //netif_rx(skb); /* socket rx */
-+ netif_receive_skb(skb); //For NAPI
-+ dev->last_rx = jiffies;
-+
-+ isPtr->rx_bytes += pkt_size;
-+ //printk("------------------->isPtr->rx_bytes = %d\n",isPtr->rx_bytes);
-+
-+
-+ }
-+ // advance one for Rx default Q 0/1
-+ rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
-+ SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
-+ tp->rx_rwptr.bits32 = rwptr.bits32;
-+ rx_pkts_num++;
-+ //rwptr.bits32 = readl(&tp->default_qhdr->word1);//try read default_qhdr again
-+ //fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+ //printk("%s:---Loop -------->rx_pkts_num=%d------------>Default Queue HW RW ptr = (0x%8x), fq_rwptr =0x%8x \n",__func__,rx_pkts_num,rwptr.bits32,fq_rwptr.bits32 );
-+#if 0
-+ if ((status4 & 0x1) == 0)
-+ {
-+ //if (!((dev->last_rx <= (rx_time + 2)) && (isPtr->rx_bytes > (rx_old_bytes + 1000000 ))))
-+ if (tp->total_q_cnt_napi < 1024)
-+ {
-+ tp->total_q_cnt_napi++;
-+ toe_gmac_fill_free_q(); //for iperf test disable
-+ }
-+ //else
-+ //printk("%s:---isPtr->rx_bytes =%u , rx_old_bytes =%u\n",__func__,isPtr->rx_bytes,rx_old_bytes );
-+
-+ }
-+#endif
-+ //rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
-+ //printk("%s:---Loop -------->rx_pkts_num=%d----rwptr.bits.rptr=0x%x-------->Default Queue HW RW ptr = (0x%8x), fq_rwptr =0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits32,fq_rwptr.bits32 );
-+ //printk("%s:---Loop rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
-+ }
-+ // advance one for Rx default Q 0/1
-+
-+ //rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
-+ //SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
-+ //tp->rx_rwptr.bits32 = rwptr.bits32;
-+ //rwptr.bits.rptr = rwptr.bits.rptr;
-+
-+ dev->quota -= rx_pkts_num;
-+ *budget -= rx_pkts_num;
-+
-+ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);//try read SWFQ empty again
-+ //fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+ rwptr.bits32 = readl(&tp->default_qhdr->word1); //try read default_qhdr again
-+ //printk("%s:---After rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
-+// if (rwptr.bits.rptr > rwptr.bits.wptr )
-+// {
-+ //toe_gmac_disable_rx(dev);
-+ //wait_event_interruptible_timeout(freeq_wait,
-+ //(rx_pkts_num == 100), CMTP_INTEROP_TIMEOUT);
-+ //printk("\n%s:: return 22222=======> rx_pkts_num =%d, rwptr.bits.rptr=%d, rwptr.bits.wptr = %d ====---------=======>JKJKJKJKJK\n",
-+ //__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
-+// return 1;
-+// }
-+
-+ if (rwptr.bits.rptr == rwptr.bits.wptr)
-+ {
-+ unsigned int data32;
-+ //printk("%s:---[rwptr.bits.rptr == rwptr.bits.wptr] rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
-+
-+ /* Receive descriptor is empty now */
-+#if 1
-+ if (status4 & 0x1)
-+ {
-+ do_again =1;
-+ //writel(0x40400000, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_4_REG); //disable SWFQ empty interrupt
-+ //toe_gmac_disable_interrupt(tp->irq);
-+ tp->sw_fq_empty_cnt++;
-+ //toe_gmac_disable_rx(dev);
-+ writel(0x07960202, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+ writel(0x07960202, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+ //printk("\n%s :: freeq int-----tp->sw_fq_empty_cnt =%d---------====================----------------->\n",__func__,tp->sw_fq_empty_cnt);
-+ //while ((fq_rwptr.bits.wptr >= (fq_rwptr.bits.rptr+256)) || (fq_rwptr.bits.wptr <= (fq_rwptr.bits.rptr+256)))
-+ //{
-+ //gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
-+ //0x1);
-+ //printk("\n%s::fq_rwptr.wrptr = %x =======> ===========>here \n", __func__,fq_rwptr.bits32);
-+ //if ((status4 & 0x1) == 0)
-+ //break;
-+ return 1;
-+ //}
-+
-+ }
-+#endif
-+ //toe_gmac_fill_free_q();
-+ netif_rx_complete(dev);
-+ // enable GMAC-0 rx interrupt
-+ // class-Q & TOE-Q are implemented in future
-+ //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+ //if (tp->port_id == 0)
-+ //data32 |= DEFAULT_Q0_INT_BIT;
-+ //else
-+ //data32 |= DEFAULT_Q1_INT_BIT;
-+ //writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+ writel(0x3, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
-+ //printk("\n%s::netif_rx_complete--> rx_pkts_num =%d, rwptr.bits.rptr=0x%x, rwptr.bits.wptr = 0x%x ====---------=======>JKJKJKJKJK\n",
-+ //__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
-+ writel(0x07960200, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+ writel(0x07960200, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+ return 0;
-+ }
-+ else
-+ {
-+ //printk("\n%s:: return 1 -->status4= 0x%x,rx_pkts_num =%d, rwptr.bits.rptr=0x%x, rwptr.bits.wptr = 0x%x ======> \n", __func__,status4,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
-+ return 1;
-+ }
-+}
-+#endif
-+
-+/*----------------------------------------------------------------------
-+* gmac_tx_timeout
-+*----------------------------------------------------------------------*/
-+void gmac_tx_timeout(struct net_device *dev)
-+{
-+ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
-+
-+#ifdef CONFIG_SL351x_SYSCTL
-+ if (tp->operation && storlink_ctl.link[tp->port_id])
-+#else
-+ if (tp->operation)
-+#endif
-+ {
-+ netif_wake_queue(dev);
-+ }
-+}
-+
-+
-+
-+/*----------------------------------------------------------------------
-+* mac_set_rule_reg
-+*----------------------------------------------------------------------*/
-+int mac_set_rule_reg(int mac, int rule, int enabled, u32 reg0, u32 reg1, u32 reg2)
-+{
-+ int total_key_dwords;
-+
-+ total_key_dwords = 1;
-+
-+ if (reg0 & MR_L2_BIT)
-+ {
-+ if (reg0 & MR_DA_BIT) total_key_dwords += 2;
-+ if (reg0 & MR_SA_BIT) total_key_dwords += 2;
-+ if ((reg0 & MR_DA_BIT) && ( reg0 & MR_SA_BIT)) total_key_dwords--;
-+ if (reg0 & (MR_PPPOE_BIT | MR_VLAN_BIT)) total_key_dwords++;
-+ }
-+ if (reg0 & MR_L3_BIT)
-+ {
-+ if (reg0 & (MR_IP_HDR_LEN_BIT | MR_TOS_TRAFFIC_BIT | MR_SPR_BITS))
-+ total_key_dwords++;
-+ if (reg0 & MR_FLOW_LABLE_BIT) total_key_dwords++;
-+ if ((reg0 & MR_IP_VER_BIT) == 0) // IPv4
-+ {
-+ if (reg1 & 0xff000000) total_key_dwords += 1;
-+ if (reg1 & 0x00ff0000) total_key_dwords += 1;
-+ }
-+ else
-+ {
-+ if (reg1 & 0xff000000) total_key_dwords += 4;
-+ if (reg1 & 0x00ff0000) total_key_dwords += 4;
-+ }
-+ }
-+ if (reg0 & MR_L4_BIT)
-+ {
-+ if (reg1 & 0x0000f000) total_key_dwords += 1;
-+ if (reg1 & 0x00000f00) total_key_dwords += 1;
-+ if (reg1 & 0x000000f0) total_key_dwords += 1;
-+ if (reg1 & 0x0000000f) total_key_dwords += 1;
-+ if (reg2 & 0xf0000000) total_key_dwords += 1;
-+ if (reg2 & 0x0f000000) total_key_dwords += 1;
-+ }
-+ if (reg0 & MR_L7_BIT)
-+ {
-+ if (reg2 & 0x00f00000) total_key_dwords += 1;
-+ if (reg2 & 0x000f0000) total_key_dwords += 1;
-+ if (reg2 & 0x0000f000) total_key_dwords += 1;
-+ if (reg2 & 0x00000f00) total_key_dwords += 1;
-+ if (reg2 & 0x000000f0) total_key_dwords += 1;
-+ if (reg2 & 0x0000000f) total_key_dwords += 1;
-+ }
-+
-+ if (total_key_dwords > HASH_MAX_KEY_DWORD)
-+ return -1;
-+
-+ if (total_key_dwords == 0 && enabled)
-+ return -2;
-+
-+ mac_set_rule_enable_bit(mac, rule, 0);
-+ if (enabled)
-+ {
-+ mac_set_MRxCRx(mac, rule, 0, reg0);
-+ mac_set_MRxCRx(mac, rule, 1, reg1);
-+ mac_set_MRxCRx(mac, rule, 2, reg2);
-+ mac_set_rule_action(mac, rule, total_key_dwords);
-+ mac_set_rule_enable_bit(mac, rule, enabled);
-+ }
-+ else
-+ {
-+ mac_set_rule_action(mac, rule, 0);
-+ }
-+ return total_key_dwords;
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_get_rule_enable_bit
-+*----------------------------------------------------------------------*/
-+int mac_get_rule_enable_bit(int mac, int rule)
-+{
-+ switch (rule)
-+ {
-+ case 0: return ((mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) >> 15) & 1);
-+ case 1: return ((mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) >> 31) & 1);
-+ case 2: return ((mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) >> 15) & 1);
-+ case 3: return ((mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) >> 31) & 1);
-+ default: return 0;
-+ }
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_set_rule_enable_bit
-+*----------------------------------------------------------------------*/
-+void mac_set_rule_enable_bit(int mac, int rule, int data)
-+{
-+ u32 reg;
-+
-+ if (data & ~1)
-+ return;
-+
-+ switch (rule)
-+ {
-+ case 0:
-+ reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) & ~(1<<15)) | (data << 15);
-+ mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG0, reg);
-+ break;
-+ case 1:
-+ reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) & ~(1<<31)) | (data << 31);
-+ mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG0, reg);
-+ break;
-+ case 2:
-+ reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) & ~(1<<15)) | (data << 15);
-+ mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG1, reg);
-+ break;
-+ case 3:
-+ reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) & ~(1<<31)) | (data << 31);
-+ mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG1, reg);
-+ }
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_set_rule_action
-+*----------------------------------------------------------------------*/
-+int mac_set_rule_action(int mac, int rule, int data)
-+{
-+ u32 reg;
-+
-+ if (data > 32)
-+ return -1;
-+
-+ if (data)
-+ data = (data << 6) | (data + HASH_ACTION_DWORDS);
-+ switch (rule)
-+ {
-+ case 0:
-+ reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) & ~(0x7ff));
-+ mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG0, reg | data);
-+ break;
-+ case 1:
-+ reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG0) & ~(0x7ff<<16));
-+ mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG0, reg | (data << 16));
-+ break;
-+ case 2:
-+ reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) & ~(0x7ff));
-+ mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG1, reg | data);
-+ break;
-+ case 3:
-+ reg = (mac_read_dma_reg(mac, GMAC_HASH_ENGINE_REG1) & ~(0x7ff<<16));
-+ mac_write_dma_reg(mac, GMAC_HASH_ENGINE_REG1, reg | (data << 16));
-+ break;
-+ default:
-+ return -1;
-+ }
-+
-+ return 0;
-+}
-+/*----------------------------------------------------------------------
-+* mac_get_MRxCRx
-+*----------------------------------------------------------------------*/
-+int mac_get_MRxCRx(int mac, int rule, int ctrlreg)
-+{
-+ int reg;
-+
-+ switch (rule)
-+ {
-+ case 0: reg = GMAC_MR0CR0 + ctrlreg * 4; break;
-+ case 1: reg = GMAC_MR1CR0 + ctrlreg * 4; break;
-+ case 2: reg = GMAC_MR2CR0 + ctrlreg * 4; break;
-+ case 3: reg = GMAC_MR3CR0 + ctrlreg * 4; break;
-+ default: return 0;
-+ }
-+ return mac_read_dma_reg(mac, reg);
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_set_MRxCRx
-+*----------------------------------------------------------------------*/
-+void mac_set_MRxCRx(int mac, int rule, int ctrlreg, u32 data)
-+{
-+ int reg;
-+
-+ switch (rule)
-+ {
-+ case 0: reg = GMAC_MR0CR0 + ctrlreg * 4; break;
-+ case 1: reg = GMAC_MR1CR0 + ctrlreg * 4; break;
-+ case 2: reg = GMAC_MR2CR0 + ctrlreg * 4; break;
-+ case 3: reg = GMAC_MR3CR0 + ctrlreg * 4; break;
-+ default: return;
-+ }
-+ mac_write_dma_reg(mac, reg, data);
-+}
-+
-+/*----------------------------------------------------------------------
-+* mac_set_rule_priority
-+*----------------------------------------------------------------------*/
-+void mac_set_rule_priority(int mac, int p0, int p1, int p2, int p3)
-+{
-+ int i;
-+ GMAC_MRxCR0_T reg[4];
-+
-+ for (i=0; i<4; i++)
-+ reg[i].bits32 = mac_get_MRxCRx(mac, i, 0);
-+
-+ reg[0].bits.priority = p0;
-+ reg[1].bits.priority = p1;
-+ reg[2].bits.priority = p2;
-+ reg[3].bits.priority = p3;
-+
-+ for (i=0; i<4; i++)
-+ mac_set_MRxCRx(mac, i, 0, reg[i].bits32);
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_netdev_ioctl
-+*----------------------------------------------------------------------*/
-+static int gmac_netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-+{
-+ int rc = 0;
-+ unsigned char *hwa = rq->ifr_ifru.ifru_hwaddr.sa_data;
-+
-+#ifdef br_if_ioctl
-+ struct ethtool_cmd ecmd; //br_if.c will call this ioctl
-+ GMAC_INFO_T *tp = dev->priv;
-+#endif
-+
-+#ifdef CONFIG_SL351x_NAT
-+ if (cmd == SIOCDEVPRIVATE)
-+ return sl351x_nat_ioctl(dev, rq, cmd);
-+#endif
-+
-+ switch (cmd) {
-+ case SIOCETHTOOL:
-+#ifdef br_if_ioctl //br_if.c will call this ioctl
-+ if (!netif_running(dev))
-+ {
-+ printk("Before changing the H/W address,please down the device.\n");
-+ return -EINVAL;
-+ }
-+ memset((void *) &ecmd, 0, sizeof (ecmd));
-+ ecmd.supported =
-+ SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII |
-+ SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
-+ SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full;
-+ ecmd.port = PORT_TP;
-+ ecmd.transceiver = XCVR_EXTERNAL;
-+ ecmd.phy_address = tp->phy_addr;
-+ switch (tp->speed_status)
-+ {
-+ case GMAC_SPEED_10: ecmd.speed = SPEED_10; break;
-+ case GMAC_SPEED_100: ecmd.speed = SPEED_100; break;
-+ case GMAC_SPEED_1000: ecmd.speed = SPEED_1000; break;
-+ default: ecmd.speed = SPEED_10; break;
-+ }
-+ ecmd.duplex = tp->full_duplex_status ? DUPLEX_FULL : DUPLEX_HALF;
-+ ecmd.advertising = ADVERTISED_TP;
-+ ecmd.advertising |= ADVERTISED_Autoneg;
-+ ecmd.autoneg = AUTONEG_ENABLE;
-+ if (copy_to_user(rq->ifr_data, &ecmd, sizeof (ecmd)))
-+ return -EFAULT;
-+#endif
-+
-+ break;
-+
-+ case SIOCSIFHWADDR:
-+ if (!netif_running(dev))
-+ {
-+ printk("Before changing the H/W address,please down the device.\n");
-+ return -EINVAL;
-+ }
-+ gmac_set_mac_address(dev,hwa);
-+ break;
-+
-+ case SIOCGMIIPHY: /* Get the address of the PHY in use. */
-+ break;
-+
-+ case SIOCGMIIREG: /* Read the specified MII register. */
-+ break;
-+
-+ case SIOCSMIIREG: /* Write the specified MII register */
-+ break;
-+
-+ default:
-+ rc = -EOPNOTSUPP;
-+ break;
-+ }
-+
-+ return rc;
-+}
-+
-+#ifdef SL351x_GMAC_WORKAROUND
-+
-+#define GMAC_TX_STATE_OFFSET 0x60
-+#define GMAC_RX_STATE_OFFSET 0x64
-+#define GMAC_POLL_HANGED_NUM 200
-+#define GMAC_RX_HANGED_STATE 0x4b2000
-+#define GMAC_RX_HANGED_MASK 0xdff000
-+#define GMAC_TX_HANGED_STATE 0x34012
-+#define GMAC_TX_HANGED_MASK 0xfffff
-+#define TOE_GLOBAL_REG_SIZE (0x78/sizeof(u32))
-+#define TOE_DMA_REG_SIZE (0xd0/sizeof(u32))
-+#define TOE_GMAC_REG_SIZE (0x30/sizeof(u32))
-+#define GMAC0_RX_HANG_BIT (1 << 0)
-+#define GMAC0_TX_HANG_BIT (1 << 1)
-+#define GMAC1_RX_HANG_BIT (1 << 2)
-+#define GMAC1_TX_HANG_BIT (1 << 3)
-+
-+int gmac_in_do_workaround;
-+#if 0
-+int debug_cnt, poll_max_cnt;
-+#endif
-+u32 gmac_workaround_cnt[4];
-+u32 toe_global_reg[TOE_GLOBAL_REG_SIZE];
-+u32 toe_dma_reg[GMAC_NUM][TOE_DMA_REG_SIZE];
-+u32 toe_gmac_reg[GMAC_NUM][TOE_GMAC_REG_SIZE];
-+u32 gmac_short_frame_workaround_cnt[2];
-+
-+static void sl351x_gmac_release_buffers(void);
-+static void sl351x_gmac_release_swtx_q(void);
-+static void sl351x_gmac_release_rx_q(void);
-+#ifdef _TOEQ_CLASSQ_READY_
-+static void sl351x_gmac_release_class_q(void);
-+static void sl351x_gmac_release_toe_q(void);
-+static void sl351x_gmac_release_intr_q(void);
-+#endif
-+static void sl351x_gmac_release_sw_free_q(void);
-+static void sl351x_gmac_release_hw_free_q(void);
-+#ifdef CONFIG_SL351x_NAT
-+static int get_free_desc_cnt(unsigned long rwptr, int total);
-+static void sl351x_gmac_release_hwtx_q(void);
-+u32 sl351x_nat_workaround_cnt;
-+#endif
-+void sl351x_gmac_save_reg(void);
-+void sl351x_gmac_restore_reg(void);
-+
-+
-+/*----------------------------------------------------------------------
-+* sl351x_poll_gmac_hanged_status
-+* - Called by timer routine, period 10ms
-+* - If (state != 0 && state == prev state && )
-+*----------------------------------------------------------------------*/
-+void sl351x_poll_gmac_hanged_status(u32 data)
-+{
-+ int i;
-+ u32 state;
-+ TOE_INFO_T *toe;
-+ GMAC_INFO_T *tp;
-+ u32 hanged_state;
-+ // int old_operation[GMAC_NUM];
-+#ifdef CONFIG_SL351x_NAT
-+ u32 hw_free_cnt;
-+#endif
-+
-+ if (gmac_in_do_workaround)
-+ return;
-+
-+ gmac_in_do_workaround = 1;
-+
-+ toe = (TOE_INFO_T *)&toe_private_data;
-+ hanged_state = 0;
-+
-+#ifdef SL351x_TEST_WORKAROUND
-+ if (toe->gmac[0].operation || toe->gmac[1].operation)
-+ {
-+ debug_cnt++;
-+ if (debug_cnt == (30 * HZ))
-+ {
-+ debug_cnt = 0;
-+ hanged_state = GMAC0_RX_HANG_BIT;
-+ goto do_workaround;
-+ }
-+ }
-+#endif
-+ if (toe->gmac[0].operation)
-+ hanged_state |= GMAC0_RX_HANG_BIT | GMAC0_TX_HANG_BIT;
-+
-+#if (GMAC_NUM > 1)
-+ if (toe->gmac[1].operation)
-+ hanged_state |= GMAC1_RX_HANG_BIT | GMAC1_TX_HANG_BIT;
-+#endif
-+
-+ for (i=0; i<GMAC_POLL_HANGED_NUM; i++)
-+ {
-+ if (hanged_state & GMAC0_RX_HANG_BIT)
-+ {
-+ state = readl(TOE_GMAC0_BASE + GMAC_RX_STATE_OFFSET) & GMAC_RX_HANGED_MASK;
-+ if (state != GMAC_RX_HANGED_STATE)
-+ hanged_state &= ~GMAC0_RX_HANG_BIT;
-+ }
-+ if (hanged_state & GMAC0_TX_HANG_BIT)
-+ {
-+ state = readl(TOE_GMAC0_BASE + GMAC_TX_STATE_OFFSET) & GMAC_TX_HANGED_MASK;
-+ if (state != GMAC_TX_HANGED_STATE)
-+ hanged_state &= ~GMAC0_TX_HANG_BIT;
-+ }
-+#if (GMAC_NUM > 1)
-+ if (hanged_state & GMAC1_RX_HANG_BIT)
-+ {
-+ state = readl(TOE_GMAC1_BASE + GMAC_RX_STATE_OFFSET) & GMAC_RX_HANGED_MASK;
-+ if (state != GMAC_RX_HANGED_STATE)
-+ hanged_state &= ~GMAC1_RX_HANG_BIT;
-+ }
-+ if (hanged_state & GMAC1_TX_HANG_BIT)
-+ {
-+ state = readl(TOE_GMAC1_BASE + GMAC_TX_STATE_OFFSET) & GMAC_TX_HANGED_MASK;
-+ if (state != GMAC_TX_HANGED_STATE)
-+ hanged_state &= ~GMAC1_TX_HANG_BIT;
-+ }
-+#endif
-+ if (!hanged_state)
-+ {
-+#if 0
-+ if (i < poll_max_cnt)
-+ poll_max_cnt = i;
-+#endif
-+ if (toe->gmac[0].short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
-+ {
-+ gmac_short_frame_workaround_cnt[0]++;
-+ toe->gmac[0].short_frames_cnt = 0;
-+ goto do_workaround;
-+ }
-+#if (GMAC_NUM > 1)
-+ if (toe->gmac[1].short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
-+ {
-+ gmac_short_frame_workaround_cnt[1]++;
-+ toe->gmac[1].short_frames_cnt = 0;
-+ goto do_workaround;
-+ }
-+#endif
-+
-+#ifdef CONFIG_SL351x_NAT
-+ hw_free_cnt = readl(TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
-+ hw_free_cnt = get_free_desc_cnt(hw_free_cnt, TOE_HW_FREEQ_DESC_NUM);
-+#ifdef NAT_WORKAROUND_BY_RESET_GMAC
-+ if (readl(TOE_GLOBAL_BASE + 0x4084) && (hw_free_cnt <= PAUSE_SET_HW_FREEQ))
-+ {
-+ sl351x_nat_workaround_cnt++;
-+ goto do_workaround;
-+ }
-+#else
-+ if (readl(TOE_GLOBAL_BASE + 0x4084) && (hw_free_cnt <= (PAUSE_SET_HW_FREEQ*2)))
-+ {
-+ sl351x_nat_workaround_cnt++;
-+ sl351x_nat_workaround_handler();
-+ }
-+#endif
-+#endif
-+ gmac_in_do_workaround = 0;
-+ add_timer(&gmac_workround_timer_obj);
-+ return;
-+ }
-+ }
-+
-+do_workaround:
-+
-+ gmac_initialized = 0;
-+ if (hanged_state)
-+ {
-+ if (hanged_state & GMAC0_RX_HANG_BIT) gmac_workaround_cnt[0]++;
-+ if (hanged_state & GMAC0_TX_HANG_BIT) gmac_workaround_cnt[1]++;
-+ if (hanged_state & GMAC1_RX_HANG_BIT) gmac_workaround_cnt[2]++;
-+ if (hanged_state & GMAC1_TX_HANG_BIT) gmac_workaround_cnt[3]++;
-+ }
-+
-+ for (i=0; i<GMAC_NUM; i++)
-+ {
-+ tp=(GMAC_INFO_T *)&toe->gmac[i];
-+ // old_operation[i] = tp->operation;
-+ if (tp->operation)
-+ {
-+ netif_stop_queue(tp->dev);
-+ clear_bit(__LINK_STATE_START, &tp->dev->state);
-+ toe_gmac_disable_interrupt(tp->irq);
-+ toe_gmac_disable_tx_rx(tp->dev);
-+ toe_gmac_hw_stop(tp->dev);
-+ }
-+ }
-+
-+ // clear all status bits
-+ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
-+ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
-+ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
-+ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
-+ writel(0xffffffff, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+
-+#if 0
-+ if ((hanged_state & GMAC0_RX_HANG_BIT) &&
-+ (readl(TOE_GMAC0_DMA_BASE + 0xdc) & 0xf0))
-+ {
-+ struct sk_buff *skb;
-+ unsigned int buf;
-+ buf = readl(TOE_GMAC0_DMA_BASE + 0x68) & ~3;
-+#ifdef CONFIG_SL351x_NAT
-+ if (buf < toe->hwfq_buf_base_dma || buf > toe->hwfq_buf_end_dma)
-+#endif
-+ {
-+ skb = (struct sk_buff *)(REG32(buf - SKB_RESERVE_BYTES));
-+ printk("GMAC-0 free a loss SKB 0x%x\n", (u32)skb);
-+ dev_kfree_skb(skb);
-+ }
-+ }
-+ if ((hanged_state & GMAC1_RX_HANG_BIT) &&
-+ (readl(TOE_GMAC1_DMA_BASE + 0xdc) & 0xf0))
-+ {
-+ struct sk_buff *skb;
-+ unsigned int buf;
-+ buf = readl(TOE_GMAC1_DMA_BASE + 0x68) & ~3;
-+#ifdef CONFIG_SL351x_NAT
-+ if (buf < toe->hwfq_buf_base_dma || buf > toe->hwfq_buf_end_dma)
-+#endif
-+ {
-+ skb = (struct sk_buff *)(REG32(buf - SKB_RESERVE_BYTES));
-+ printk("GMAC-1 free a loss SKB 0x%x\n", (u32)skb);
-+ dev_kfree_skb(skb);
-+ }
-+ }
-+#endif
-+
-+ sl351x_gmac_release_buffers();
-+ sl351x_gmac_save_reg();
-+ toe_gmac_sw_reset();
-+ sl351x_gmac_restore_reg();
-+
-+ if (toe->gmac[0].default_qhdr->word1.bits32)
-+ {
-+ // printk("===> toe->gmac[0].default_qhdr->word1 = 0x%x\n", toe->gmac[0].default_qhdr->word1);
-+ sl351x_gmac_release_rx_q();
-+ writel(0, &toe->gmac[0].default_qhdr->word1);
-+ }
-+ if (toe->gmac[1].default_qhdr->word1.bits32)
-+ {
-+ // printk("===> toe->gmac[1].default_qhdr->word1 = 0x%x\n", toe->gmac[1].default_qhdr->word1);
-+ sl351x_gmac_release_rx_q();
-+ writel(0, &toe->gmac[1].default_qhdr->word1);
-+ }
-+
-+ gmac_initialized = 1;
-+
-+#ifdef CONFIG_SL351x_NAT
-+ writel(0, TOE_GLOBAL_BASE + 0x4084);
-+#endif
-+
-+ for (i=0; i<GMAC_NUM; i++)
-+ {
-+ tp=(GMAC_INFO_T *)&toe->gmac[i];
-+ if (tp->operation)
-+ {
-+ toe_gmac_enable_interrupt(tp->irq);
-+ toe_gmac_hw_start(tp->dev);
-+ toe_gmac_enable_tx_rx(tp->dev);
-+ netif_wake_queue(tp->dev);
-+ set_bit(__LINK_STATE_START, &tp->dev->state);
-+ }
-+ }
-+
-+ gmac_in_do_workaround = 0;
-+ add_timer(&gmac_workround_timer_obj);
-+}
-+
-+/*----------------------------------------------------------------------
-+* get_free_desc_cnt
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_NAT
-+static int get_free_desc_cnt(unsigned long rwptr, int total)
-+{
-+ unsigned short wptr = rwptr & 0xffff;
-+ unsigned short rptr = rwptr >> 16;
-+
-+ if (wptr >= rptr)
-+ return (total - wptr + rptr);
-+ else
-+ return (rptr - wptr);
-+}
-+#endif
-+/*----------------------------------------------------------------------
-+* sl351x_gmac_release_buffers
-+*----------------------------------------------------------------------*/
-+static void sl351x_gmac_release_buffers(void)
-+{
-+ // Free buffers & Descriptors in all SW Tx Queues
-+ sl351x_gmac_release_swtx_q();
-+
-+ // Free buffers in Default Rx Queues
-+ sl351x_gmac_release_rx_q();
-+
-+#ifdef _TOEQ_CLASSQ_READY_
-+ // Free buffers in Classification Queues
-+ sl351x_gmac_release_class_q();
-+
-+ // Free buffers in TOE Queues
-+ sl351x_gmac_release_toe_q();
-+
-+ // Free buffers in Interrupt Queues
-+ sl351x_gmac_release_intr_q();
-+#endif
-+
-+ // Free buffers & descriptors in SW free queue
-+ sl351x_gmac_release_sw_free_q();
-+
-+ // Free buffers & descriptors in HW free queue
-+ sl351x_gmac_release_hw_free_q();
-+
-+#ifdef CONFIG_SL351x_NAT
-+ // Free buffers & descriptors in HW free queue
-+ sl351x_gmac_release_hwtx_q();
-+#endif
-+}
-+/*----------------------------------------------------------------------
-+* sl351x_gmac_release_swtx_q
-+*----------------------------------------------------------------------*/
-+static void sl351x_gmac_release_swtx_q(void)
-+{
-+ int i, j;
-+ GMAC_TXDESC_T *curr_desc;
-+ unsigned int desc_count;
-+ TOE_INFO_T *toe;
-+ GMAC_INFO_T *tp;
-+ GMAC_SWTXQ_T *swtxq;
-+ DMA_RWPTR_T rwptr;
-+
-+ toe = (TOE_INFO_T *)&toe_private_data;
-+ tp = (GMAC_INFO_T *)&toe->gmac[0];
-+ for (i=0; i<GMAC_NUM; i++, tp++)
-+ {
-+ if (!tp->existed) continue;
-+ swtxq = (GMAC_SWTXQ_T *)&tp->swtxq[0];
-+ for (j=0; j<TOE_SW_TXQ_NUM; j++, swtxq++)
-+ {
-+ for (;;)
-+ {
-+ rwptr.bits32 = readl(swtxq->rwptr_reg);
-+ if (rwptr.bits.rptr == swtxq->finished_idx)
-+ break;
-+ curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
-+ // if (curr_desc->word0.bits.status_tx_ok)
-+ {
-+ desc_count = curr_desc->word0.bits.desc_count;
-+ while (--desc_count)
-+ {
-+ curr_desc->word0.bits.status_tx_ok = 0;
-+ swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num);
-+ curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
-+ }
-+
-+ curr_desc->word0.bits.status_tx_ok = 0;
-+ if (swtxq->tx_skb[swtxq->finished_idx])
-+ {
-+ dev_kfree_skb_irq(swtxq->tx_skb[swtxq->finished_idx]);
-+ swtxq->tx_skb[swtxq->finished_idx] = NULL;
-+ }
-+ }
-+ swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num);
-+ }
-+ writel(0, swtxq->rwptr_reg);
-+ swtxq->finished_idx = 0;
-+ }
-+ }
-+
-+}
-+/*----------------------------------------------------------------------
-+* sl351x_gmac_release_rx_q
-+*----------------------------------------------------------------------*/
-+static void sl351x_gmac_release_rx_q(void)
-+{
-+ int i;
-+ TOE_INFO_T *toe;
-+ GMAC_INFO_T *tp;
-+ DMA_RWPTR_T rwptr;
-+ volatile GMAC_RXDESC_T *curr_desc;
-+ struct sk_buff *skb;
-+
-+ toe = (TOE_INFO_T *)&toe_private_data;
-+ tp = (GMAC_INFO_T *)&toe->gmac[0];
-+ for (i=0; i<GMAC_NUM; i++, tp++)
-+ {
-+ if (!tp->existed) continue;
-+ rwptr.bits32 = readl(&tp->default_qhdr->word1);
-+ while (rwptr.bits.rptr != rwptr.bits.wptr)
-+ {
-+ curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
-+ skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
-+ dev_kfree_skb_irq(skb);
-+ rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
-+ SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
-+ rwptr.bits32 = readl(&tp->default_qhdr->word1);
-+ } // while
-+ writel(0, &tp->default_qhdr->word1);
-+ tp->rx_rwptr.bits32 = 0;
-+ } // for
-+
-+}
-+/*----------------------------------------------------------------------
-+* sl351x_gmac_release_class_q
-+*----------------------------------------------------------------------*/
-+#ifdef _TOEQ_CLASSQ_READY_
-+static void sl351x_gmac_release_class_q(void)
-+{
-+ int i;
-+ TOE_INFO_T *toe;
-+ CLASSQ_INFO_T *classq;
-+ DMA_RWPTR_T rwptr;
-+ volatile GMAC_RXDESC_T *curr_desc;
-+ struct sk_buff *skb;
-+
-+ toe = (TOE_INFO_T *)&toe_private_data;
-+ classq = (CLASSQ_INFO_T *)&toe->classq[0];
-+ for (i=0; i<TOE_CLASS_QUEUE_NUM; i++, classq++)
-+ {
-+ rwptr.bits32 = readl(&classq->qhdr->word1);
-+ while (rwptr.bits.rptr != rwptr.bits.wptr)
-+ {
-+ curr_desc = (GMAC_RXDESC_T *)classq->desc_base + rwptr.bits.rptr;
-+ skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
-+ dev_kfree_skb_irq(skb);
-+ rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, classq->desc_num);
-+ SET_RPTR(&classq->qhdr->word1, rwptr.bits.rptr);
-+ rwptr.bits32 = readl(&classq->qhdr->word1);
-+ } // while
-+ writel(0, &classq->qhdr->word1);
-+ classq->rwptr.bits32 = 0;
-+ } // for
-+
-+}
-+#endif
-+/*----------------------------------------------------------------------
-+* sl351x_gmac_release_toe_q
-+*----------------------------------------------------------------------*/
-+#ifdef _TOEQ_CLASSQ_READY_
-+static void sl351x_gmac_release_toe_q(void)
-+{
-+ int i;
-+ TOE_INFO_T *toe;
-+ TOEQ_INFO_T *toeq_info;
-+ TOE_QHDR_T *toe_qhdr;
-+ DMA_RWPTR_T rwptr;
-+ volatile GMAC_RXDESC_T *curr_desc;
-+ unsigned int rptr, wptr;
-+ GMAC_RXDESC_T *toe_curr_desc;
-+ struct sk_buff *skb;
-+
-+ toe = (TOE_INFO_T *)&toe_private_data;
-+ toe_qhdr = (TOE_QHDR_T *)TOE_TOE_QUE_HDR_BASE;
-+ for (i=0; i<TOE_TOE_QUEUE_NUM; i++, toe_qhdr++)
-+ {
-+ toeq_info = (TOEQ_INFO_T *)&toe->toeq[i];
-+ wptr = toe_qhdr->word1.bits.wptr;
-+ rptr = toe_qhdr->word1.bits.rptr;
-+ while (rptr != wptr)
-+ {
-+ toe_curr_desc = (GMAC_RXDESC_T *)toeq_info->desc_base + rptr;
-+ skb = (struct sk_buff *)(REG32(__va(toe_curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
-+ dev_kfree_skb_irq(skb);
-+ rptr = RWPTR_ADVANCE_ONE(rptr, toeq_info->desc_num);
-+ SET_RPTR(&toe_qhdr->word1.bits32, rptr);
-+ wptr = toe_qhdr->word1.bits.wptr;
-+ rptr = toe_qhdr->word1.bits.rptr;
-+ }
-+ toe_qhdr->word1.bits32 = 0;
-+ toeq_info->rwptr.bits32 = 0;
-+ }
-+}
-+#endif
-+/*----------------------------------------------------------------------
-+* sl351x_gmac_release_intr_q
-+*----------------------------------------------------------------------*/
-+#ifdef _TOEQ_CLASSQ_READY_
-+static void sl351x_gmac_release_intr_q(void)
-+{
-+}
-+#endif
-+/*----------------------------------------------------------------------
-+* sl351x_gmac_release_sw_free_q
-+*----------------------------------------------------------------------*/
-+static void sl351x_gmac_release_sw_free_q(void)
-+{
-+ TOE_INFO_T *toe;
-+ volatile DMA_RWPTR_T fq_rwptr;
-+ volatile GMAC_RXDESC_T *fq_desc;
-+
-+ toe = (TOE_INFO_T *)&toe_private_data;
-+ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+
-+ while ((unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr)
-+ {
-+ struct sk_buff *skb;
-+ if ((skb = dev_alloc_skb(SW_RX_BUF_SIZE))==NULL) /* allocate socket buffer */
-+ {
-+ printk("%s::skb buffer allocation fail !\n",__func__); while(1);
-+ }
-+ // *(unsigned int *)(skb->data) = (unsigned int)skb;
-+ REG32(skb->data) = (unsigned long)skb;
-+ skb_reserve(skb, SKB_RESERVE_BYTES);
-+
-+ fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM);
-+ fq_desc = (volatile GMAC_RXDESC_T *)toe->swfq_desc_base + fq_rwptr.bits.wptr;
-+ fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
-+ SET_WPTR(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
-+ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+ }
-+
-+ toe->fq_rx_rwptr.bits.wptr = TOE_SW_FREEQ_DESC_NUM - 1;
-+ toe->fq_rx_rwptr.bits.rptr = 0;
-+ writel(toe->fq_rx_rwptr.bits32, TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+
-+}
-+/*----------------------------------------------------------------------
-+* sl351x_gmac_release_hw_free_q
-+*----------------------------------------------------------------------*/
-+static void sl351x_gmac_release_hw_free_q(void)
-+{
-+ DMA_RWPTR_T rwptr_reg;
-+
-+#ifdef CONFIG_SL351x_NAT
-+ int i;
-+ TOE_INFO_T *toe;
-+ GMAC_RXDESC_T *desc_ptr;
-+ unsigned int buf_ptr;
-+
-+ toe = (TOE_INFO_T *)&toe_private_data;
-+ desc_ptr = (GMAC_RXDESC_T *)toe->hwfq_desc_base;
-+ buf_ptr = (unsigned int)toe->hwfq_buf_base_dma;
-+ for (i=0; i<TOE_HW_FREEQ_DESC_NUM; i++)
-+ {
-+ desc_ptr->word0.bits.buffer_size = HW_RX_BUF_SIZE;
-+ desc_ptr->word1.bits.sw_id = i;
-+ desc_ptr->word2.buf_adr = (unsigned int)buf_ptr;
-+ desc_ptr++;
-+ buf_ptr += HW_RX_BUF_SIZE;
-+ }
-+#endif
-+ rwptr_reg.bits.wptr = TOE_HW_FREEQ_DESC_NUM - 1;
-+ rwptr_reg.bits.rptr = 0;
-+ writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
-+}
-+
-+/*----------------------------------------------------------------------
-+* sl351x_gmac_release_hw_free_q
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_NAT
-+static void sl351x_gmac_release_hwtx_q(void)
-+{
-+ int i;
-+ unsigned int rwptr_addr;
-+
-+ rwptr_addr = TOE_GMAC0_DMA_BASE + GMAC_HW_TX_QUEUE0_PTR_REG;
-+ for (i=0; i<TOE_HW_TXQ_NUM; i++)
-+ {
-+ writel(0, rwptr_addr);
-+ rwptr_addr+=4;
-+ }
-+ rwptr_addr = TOE_GMAC1_DMA_BASE + GMAC_HW_TX_QUEUE0_PTR_REG;
-+ for (i=0; i<TOE_HW_TXQ_NUM; i++)
-+ {
-+ writel(0, rwptr_addr);
-+ rwptr_addr+=4;
-+ }
-+}
-+#endif
-+
-+/*----------------------------------------------------------------------
-+* sl351x_gmac_save_reg
-+*----------------------------------------------------------------------*/
-+void sl351x_gmac_save_reg(void)
-+{
-+ int i;
-+ volatile u32 *destp;
-+ unsigned int srce_addr;
-+
-+ srce_addr = TOE_GLOBAL_BASE;
-+ destp = (volatile u32 *)toe_global_reg;
-+ for (i=0; i<TOE_GLOBAL_REG_SIZE; i++, destp++, srce_addr+=4)
-+ *destp = readl(srce_addr);
-+
-+ srce_addr = TOE_GMAC0_DMA_BASE;
-+ destp = (volatile u32 *)&toe_dma_reg[0][0];
-+ for (i=0; i<TOE_DMA_REG_SIZE; i++, destp++, srce_addr+=4)
-+ {
-+ if (srce_addr == (TOE_GMAC0_DMA_BASE+0x38))
-+ srce_addr = (TOE_GMAC0_DMA_BASE+0x50);
-+ if (srce_addr == (TOE_GMAC0_DMA_BASE+0x58))
-+ srce_addr = (TOE_GMAC0_DMA_BASE+0x70);
-+
-+ *destp = readl(srce_addr);
-+ }
-+ srce_addr = TOE_GMAC1_DMA_BASE;
-+ destp = (volatile u32 *)&toe_dma_reg[1][0];
-+ for (i=0; i<TOE_DMA_REG_SIZE; i++, destp++, srce_addr+=4)
-+ {
-+ if (srce_addr == (TOE_GMAC0_DMA_BASE+0x38))
-+ srce_addr = (TOE_GMAC0_DMA_BASE+0x50);
-+ if (srce_addr == (TOE_GMAC0_DMA_BASE+0x58))
-+ srce_addr = (TOE_GMAC0_DMA_BASE+0x70);
-+
-+ *destp = readl(srce_addr);
-+ }
-+
-+ srce_addr = TOE_GMAC0_BASE;
-+ destp = (volatile u32 *)&toe_gmac_reg[0][0];
-+ for (i=0; i<TOE_GMAC_REG_SIZE; i++, destp++, srce_addr+=4)
-+ *destp = readl(srce_addr);
-+
-+ srce_addr = TOE_GMAC1_BASE;
-+ destp = (volatile u32 *)&toe_gmac_reg[1][0];
-+ for (i=0; i<TOE_GMAC_REG_SIZE; i++, destp++, srce_addr+=4)
-+ *destp = readl(srce_addr);
-+}
-+
-+/*----------------------------------------------------------------------
-+* sl351x_gmac_restore_reg
-+*----------------------------------------------------------------------*/
-+void sl351x_gmac_restore_reg(void)
-+{
-+ int i;
-+ volatile u32 *srcep;
-+ unsigned int dest_addr;
-+
-+ srcep = (volatile u32 *)&toe_dma_reg[0][0];
-+ dest_addr = TOE_GMAC0_DMA_BASE;
-+ for (i=0; i<TOE_DMA_REG_SIZE; i++, dest_addr+=4, srcep++)
-+ {
-+ if (dest_addr == (TOE_GMAC0_DMA_BASE+0x38))
-+ dest_addr = (TOE_GMAC0_DMA_BASE+0x50);
-+ if (dest_addr == (TOE_GMAC0_DMA_BASE+0x58))
-+ dest_addr = (TOE_GMAC0_DMA_BASE+0x70);
-+
-+ writel(*srcep, dest_addr);
-+ // gmac_write_reg(dest_addr, 0, *srcep, 0xffffffff);
-+ }
-+ srcep = (volatile u32 *)&toe_dma_reg[1][0];
-+ dest_addr = TOE_GMAC1_DMA_BASE;
-+ for (i=0; i<TOE_DMA_REG_SIZE; i++, dest_addr+=4, srcep++)
-+ {
-+ if (dest_addr == (TOE_GMAC0_DMA_BASE+0x38))
-+ dest_addr = (TOE_GMAC0_DMA_BASE+0x50);
-+ if (dest_addr == (TOE_GMAC0_DMA_BASE+0x58))
-+ dest_addr = (TOE_GMAC0_DMA_BASE+0x70);
-+
-+ writel(*srcep, dest_addr);
-+ // gmac_write_reg(dest_addr, 0, *srcep, 0xffffffff);
-+ }
-+
-+ srcep = (volatile u32 *)&toe_gmac_reg[0][0];
-+ dest_addr = TOE_GMAC0_BASE;
-+ for (i=0; i<TOE_GMAC_REG_SIZE; i++, dest_addr+=4, srcep++)
-+ writel(*srcep, dest_addr);
-+
-+ srcep = (volatile u32 *)&toe_gmac_reg[1][0];
-+ dest_addr = TOE_GMAC1_BASE;
-+ for (i=0; i<TOE_GMAC_REG_SIZE; i++, dest_addr+=4, srcep++)
-+ writel(*srcep, dest_addr);
-+
-+ srcep = (volatile u32 *)toe_global_reg;
-+ dest_addr = TOE_GLOBAL_BASE;
-+ for (i=0; i<TOE_GLOBAL_REG_SIZE; i++, dest_addr+=4, srcep++)
-+ writel(*srcep, dest_addr);
-+
-+}
-+
-+#ifdef CONFIG_SL351x_NAT
-+/*----------------------------------------------------------------------
-+* sl351x_nat_workaround_init
-+*----------------------------------------------------------------------*/
-+#define NAT_WORAROUND_DESC_POWER (6)
-+#define NAT_WORAROUND_DESC_NUM (2 << NAT_WORAROUND_DESC_POWER)
-+dma_addr_t sl351x_nat_workaround_desc_dma;
-+void sl351x_nat_workaround_init(void)
-+{
-+ unsigned int desc_buf;
-+
-+ desc_buf = (unsigned int)DMA_MALLOC((NAT_WORAROUND_DESC_NUM * sizeof(GMAC_RXDESC_T)),
-+ (dma_addr_t *)&sl351x_nat_workaround_desc_dma) ;
-+ memset((void *)desc_buf, 0, NAT_WORAROUND_DESC_NUM * sizeof(GMAC_RXDESC_T));
-+
-+ // DMA Queue Base & Size
-+ writel((sl351x_nat_workaround_desc_dma & DMA_Q_BASE_MASK) | NAT_WORAROUND_DESC_POWER,
-+ TOE_GLOBAL_BASE + 0x4080);
-+ writel(0, TOE_GLOBAL_BASE + 0x4084);
-+}
-+
-+/*----------------------------------------------------------------------
-+* sl351x_nat_workaround_handler
-+*----------------------------------------------------------------------*/
-+#ifndef NAT_WORKAROUND_BY_RESET_GMAC
-+static void sl351x_nat_workaround_handler(void)
-+{
-+ int i;
-+ DMA_RWPTR_T rwptr;
-+ GMAC_RXDESC_T *desc_ptr;
-+ unsigned int buf_ptr;
-+ TOE_INFO_T *toe;
-+ GMAC_CONFIG0_T config0;
-+ unsigned int rwptr_addr;
-+
-+ toe = (TOE_INFO_T *)&toe_private_data;
-+
-+ // disable Rx of GMAC-0 & 1
-+ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+ config0.bits.dis_rx = 1;
-+ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+ config0.bits.dis_rx = 1;
-+ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+
-+ // wait GMAC-0 HW Tx finished
-+ rwptr_addr = TOE_GMAC0_DMA_BASE + GMAC_HW_TX_QUEUE0_PTR_REG;
-+ for (i=0; i<TOE_HW_TXQ_NUM; i++)
-+ {
-+ rwptr.bits32 = readl(rwptr_addr);
-+ if (rwptr.bits.rptr != rwptr.bits.wptr)
-+ return; // wait the HW to send packets and release buffers
-+ rwptr_addr+=4;
-+ }
-+ rwptr_addr = TOE_GMAC1_DMA_BASE + GMAC_HW_TX_QUEUE0_PTR_REG;
-+ for (i=0; i<TOE_HW_TXQ_NUM; i++)
-+ {
-+ rwptr.bits32 = readl(rwptr_addr);
-+ if (rwptr.bits.rptr != rwptr.bits.wptr)
-+ return; // wait the HW to send packets and release buffers
-+ rwptr_addr+=4;
-+ }
-+
-+ // printk("sl351x_nat_workaround_handler %d\n", sl351x_nat_workaround_cnt);
-+ desc_ptr = (GMAC_RXDESC_T *)toe->hwfq_desc_base;
-+ buf_ptr = (unsigned int)toe->hwfq_buf_base_dma;
-+ for (i=0; i<TOE_HW_FREEQ_DESC_NUM; i++)
-+ {
-+ desc_ptr->word0.bits.buffer_size = HW_RX_BUF_SIZE;
-+ desc_ptr->word1.bits.sw_id = i;
-+ desc_ptr->word2.buf_adr = (unsigned int)buf_ptr;
-+ desc_ptr++;
-+ buf_ptr += HW_RX_BUF_SIZE;
-+ }
-+ rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
-+ rwptr.bits.wptr = RWPTR_RECEDE_ONE(rwptr.bits.rptr, TOE_HW_FREEQ_DESC_NUM);
-+ writel(rwptr.bits32, TOE_GLOBAL_BASE + GLOBAL_HWFQ_RWPTR_REG);
-+ writel(0, TOE_GLOBAL_BASE + 0x4084);
-+
-+ // Enable Rx of GMAC-0 & 1
-+ config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-+ config0.bits.dis_rx = 0;
-+ writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+ config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-+ config0.bits.dis_rx = 0;
-+ writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-+}
-+#endif
-+#endif // CONFIG_SL351x_NAT
-+
-+#endif // SL351x_GMAC_WORKAROUND
-+
-+/* get the mac addresses from flash
-+ *can't do this in module_init because mtd driver is initialized after ethernet
-+ */
-+static __init int sl351x_mac_address_init(void)
-+{
-+ GMAC_INFO_T *tp;
-+ struct sockaddr sock;
-+ int i;
-+
-+ /* get mac address from FLASH */
-+ gmac_get_mac_address();
-+
-+ for (i = 0; i < GMAC_NUM; i++) {
-+ tp = (GMAC_INFO_T *)&toe_private_data.gmac[i];
-+ memcpy(&sock.sa_data[0],&eth_mac[tp->port_id][0],6);
-+ gmac_set_mac_address(tp->dev,(void *)&sock);
-+ }
-+
-+ return 0;
-+}
-+late_initcall(sl351x_mac_address_init);
-+
-+
---- /dev/null
-+++ b/drivers/net/sl351x_hash.c
-@@ -0,0 +1,713 @@
-+/**************************************************************************
-+* Copyright 2006 StorLink Semiconductors, Inc. All rights reserved.
-+*--------------------------------------------------------------------------
-+* Name : sl351x_hash.c
-+* Description :
-+* Handle Storlink SL351x Hash Functions
-+*
-+* History
-+*
-+* Date Writer Description
-+*----------------------------------------------------------------------------
-+* 03/13/2006 Gary Chen Create and implement
-+*
-+****************************************************************************/
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/compiler.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/ioport.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/rtnetlink.h>
-+#include <linux/delay.h>
-+#include <linux/ethtool.h>
-+#include <linux/mii.h>
-+#include <linux/completion.h>
-+#include <asm/hardware.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/semaphore.h>
-+#include <asm/arch/irqs.h>
-+#include <asm/arch/it8712.h>
-+#include <linux/mtd/kvctl.h>
-+#include <linux/skbuff.h>
-+#include <linux/in.h>
-+#include <linux/ip.h>
-+#include <linux/tcp.h>
-+#include <linux/list.h>
-+#define MIDWAY
-+#define SL_LEPUS
-+
-+#include <asm/arch/sl2312.h>
-+#include <asm/arch/sl351x_gmac.h>
-+#include <asm/arch/sl351x_hash_cfg.h>
-+
-+#ifndef RXTOE_DEBUG
-+#define RXTOE_DEBUG
-+#endif
-+#undef RXTOE_DEBUG
-+
-+/*----------------------------------------------------------------------
-+* Definition
-+*----------------------------------------------------------------------*/
-+#define hash_printf printk
-+
-+#define HASH_TIMER_PERIOD (30) // seconds
-+#define HASH_ILLEGAL_INDEX 0xffff
-+
-+/*----------------------------------------------------------------------
-+* Variables
-+*----------------------------------------------------------------------*/
-+u32 hash_nat_owner_bits[HASH_TOTAL_ENTRIES/32];
-+char hash_tables[HASH_TOTAL_ENTRIES][HASH_MAX_BYTES] __attribute__ ((aligned(16)));
-+static struct timer_list hash_timer_obj;
-+LIST_HEAD(hash_timeout_list);
-+
-+/*----------------------------------------------------------------------
-+* Functions
-+*----------------------------------------------------------------------*/
-+void dm_long(u32 location, int length);
-+static void hash_timer_func(u32 data);
-+
-+/*----------------------------------------------------------------------
-+* hash_init
-+*----------------------------------------------------------------------*/
-+void sl351x_hash_init(void)
-+{
-+ int i;
-+ volatile u32 *dp1, *dp2, dword;
-+
-+ dp1 = (volatile u32 *) TOE_V_BIT_BASE;
-+ dp2 = (volatile u32 *) TOE_A_BIT_BASE;
-+
-+ for (i=0; i<HASH_TOTAL_ENTRIES/32; i++)
-+ {
-+ *dp1++ = 0;
-+ dword = *dp2++; // read-clear
-+ }
-+ memset((void *)&hash_nat_owner_bits, 0, sizeof(hash_nat_owner_bits));
-+ memset((void *)&hash_tables, 0, sizeof(hash_tables));
-+
-+ init_timer(&hash_timer_obj);
-+ hash_timer_obj.expires = jiffies + (HASH_TIMER_PERIOD * HZ);
-+ hash_timer_obj.data = (unsigned long)&hash_timer_obj;
-+ hash_timer_obj.function = (void *)&hash_timer_func;
-+ add_timer(&hash_timer_obj);
-+
-+#if (HASH_MAX_BYTES == 128)
-+ writel((unsigned long)__pa(&hash_tables) | 3, // 32 words
-+ TOE_GLOBAL_BASE + GLOBAL_HASH_TABLE_BASE_REG);
-+#elif (HASH_MAX_BYTES == 64)
-+ writel((unsigned long)__pa(&hash_tables) | 2, // 16 words
-+ TOE_GLOBAL_BASE + GLOBAL_HASH_TABLE_BASE_REG);
-+#else
-+ #error Incorrect setting for HASH_MAX_BYTES
-+#endif
-+
-+}
-+/*----------------------------------------------------------------------
-+* hash_add_entry
-+*----------------------------------------------------------------------*/
-+int hash_add_entry(HASH_ENTRY_T *entry)
-+{
-+ int rc;
-+ u32 key[HASH_MAX_DWORDS];
-+ rc = hash_build_keys((u32 *)&key, entry);
-+ if (rc < 0)
-+ return -1;
-+ hash_write_entry(entry, (unsigned char*) &key[0]);
-+// hash_set_valid_flag(entry->index, 1);
-+// printk("Dump hash key!\n");
-+// dump_hash_key(entry);
-+ return entry->index;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_set_valid_flag
-+*----------------------------------------------------------------------*/
-+void hash_set_valid_flag(int index, int valid)
-+{
-+ register u32 reg32;
-+
-+ reg32 = TOE_V_BIT_BASE + (index/32) * 4;
-+
-+ if (valid)
-+ {
-+ writel(readl(reg32) | (1 << (index%32)), reg32);
-+ }
-+ else
-+ {
-+ writel(readl(reg32) & ~(1 << (index%32)), reg32);
-+ }
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_set_nat_owner_flag
-+*----------------------------------------------------------------------*/
-+void hash_set_nat_owner_flag(int index, int valid)
-+{
-+ if (valid)
-+ {
-+ hash_nat_owner_bits[index/32] |= (1 << (index % 32));
-+ }
-+ else
-+ {
-+ hash_nat_owner_bits[index/32] &= ~(1 << (index % 32));
-+ }
-+}
-+
-+
-+/*----------------------------------------------------------------------
-+* hash_build_keys
-+*----------------------------------------------------------------------*/
-+int hash_build_keys(u32 *destp, HASH_ENTRY_T *entry)
-+{
-+ u32 data;
-+ unsigned char *cp;
-+ int i, j;
-+ unsigned short index;
-+ int total;
-+
-+ memset((void *)destp, 0, HASH_MAX_BYTES);
-+ cp = (unsigned char *)destp;
-+
-+ if (entry->key_present.port || entry->key_present.Ethertype)
-+ {
-+ HASH_PUSH_WORD(cp, entry->key.Ethertype); // word 0
-+ HASH_PUSH_BYTE(cp, entry->key.port); // Byte 2
-+ HASH_PUSH_BYTE(cp, 0); // Byte 3
-+ }
-+ else
-+ {
-+ HASH_PUSH_DWORD(cp, 0);
-+ }
-+
-+ if (entry->key_present.da || entry->key_present.sa)
-+ {
-+ unsigned char mac[4];
-+ if (entry->key_present.da)
-+ {
-+ for (i=0; i<4; i++)
-+ HASH_PUSH_BYTE(cp, entry->key.da[i]);
-+ }
-+ mac[0] = (entry->key_present.da) ? entry->key.da[4] : 0;
-+ mac[1] = (entry->key_present.da) ? entry->key.da[5] : 0;
-+ mac[2] = (entry->key_present.sa) ? entry->key.sa[0] : 0;
-+ mac[3] = (entry->key_present.sa) ? entry->key.sa[1] : 0;
-+ data = mac[0] + (mac[1]<<8) + (mac[2]<<16) + (mac[3]<<24);
-+ HASH_PUSH_DWORD(cp, data);
-+ if (entry->key_present.sa)
-+ {
-+ for (i=2; i<6; i++)
-+ HASH_PUSH_BYTE(cp, entry->key.sa[i]);
-+ }
-+ }
-+
-+ if (entry->key_present.pppoe_sid || entry->key_present.vlan_id)
-+ {
-+ HASH_PUSH_WORD(cp, entry->key.vlan_id); // low word
-+ HASH_PUSH_WORD(cp, entry->key.pppoe_sid); // high word
-+ }
-+ if (entry->key_present.ipv4_hdrlen || entry->key_present.ip_tos || entry->key_present.ip_protocol)
-+ {
-+ HASH_PUSH_BYTE(cp, entry->key.ip_protocol); // Byte 0
-+ HASH_PUSH_BYTE(cp, entry->key.ip_tos); // Byte 1
-+ HASH_PUSH_BYTE(cp, entry->key.ipv4_hdrlen); // Byte 2
-+ HASH_PUSH_BYTE(cp, 0); // Byte 3
-+ }
-+
-+ if (entry->key_present.ipv6_flow_label)
-+ {
-+ HASH_PUSH_DWORD(cp, entry->key.ipv6_flow_label); // low word
-+ }
-+ if (entry->key_present.sip)
-+ {
-+ // input (entry->key.sip[i]) is network-oriented
-+ // output (hash key) is host-oriented
-+ for (i=3; i>=0; i--)
-+ HASH_PUSH_BYTE(cp, entry->key.sip[i]);
-+ if (entry->key.ipv6)
-+ {
-+ for (i=4; i<16; i+=4)
-+ {
-+ for (j=i+3; j>=i; j--)
-+ HASH_PUSH_BYTE(cp, entry->key.sip[j]);
-+ }
-+ }
-+ }
-+ if (entry->key_present.dip)
-+ {
-+ // input (entry->key.sip[i]) is network-oriented
-+ // output (hash key) is host-oriented
-+ for (i=3; i>=0; i--)
-+ HASH_PUSH_BYTE(cp, entry->key.dip[i]);
-+ if (entry->key.ipv6)
-+ {
-+ for (i=4; i<16; i+=4)
-+ {
-+ for (j=i+3; j>=i; j--)
-+ HASH_PUSH_BYTE(cp, entry->key.dip[j]);
-+ }
-+ }
-+ }
-+
-+ if (entry->key_present.l4_bytes_0_3)
-+ {
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[0]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[1]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[2]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[3]);
-+ }
-+ if (entry->key_present.l4_bytes_4_7)
-+ {
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[4]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[5]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[6]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[7]);
-+ }
-+ if (entry->key_present.l4_bytes_8_11)
-+ {
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[8]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[9]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[10]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[11]);
-+ }
-+ if (entry->key_present.l4_bytes_12_15)
-+ {
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[12]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[13]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[14]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[15]);
-+ }
-+ if (entry->key_present.l4_bytes_16_19)
-+ {
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[16]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[17]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[18]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[19]);
-+ }
-+ if (entry->key_present.l4_bytes_20_23)
-+ {
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[20]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[21]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[22]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[23]);
-+ }
-+ if (entry->key_present.l7_bytes_0_3)
-+ {
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[0]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[1]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[2]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[3]);
-+ }
-+ if (entry->key_present.l7_bytes_4_7)
-+ {
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[4]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[5]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[6]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[7]);
-+ }
-+ if (entry->key_present.l7_bytes_8_11)
-+ {
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[8]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[9]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[10]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[11]);
-+ }
-+ if (entry->key_present.l7_bytes_12_15)
-+ {
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[12]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[13]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[14]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[15]);
-+ }
-+ if (entry->key_present.l7_bytes_16_19)
-+ {
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[16]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[17]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[18]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[19]);
-+ }
-+ if (entry->key_present.l7_bytes_20_23)
-+ {
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[20]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[21]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[22]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[23]);
-+ }
-+
-+ // get hash index
-+ total = (u32)((u32)cp - (u32)destp) / (sizeof(u32));
-+
-+ if (total > HASH_MAX_KEY_DWORD)
-+ {
-+ //hash_printf("Total key words (%d) is too large (> %d)!\n",
-+ // total, HASH_MAX_KEY_DWORD);
-+ return -1;
-+ }
-+
-+ if (entry->key_present.port || entry->key_present.Ethertype)
-+ index = hash_gen_crc16((unsigned char *)destp, total * 4);
-+ else
-+ {
-+ if (total == 1)
-+ {
-+ hash_printf("No key is assigned!\n");
-+ return -1;
-+ }
-+
-+ index = hash_gen_crc16((unsigned char *)(destp+1), (total-1) * 4);
-+ }
-+
-+ entry->index = index & HASH_BITS_MASK;
-+
-+ //hash_printf("Total key words = %d, Hash Index= %d\n",
-+ // total, entry->index);
-+
-+ cp = (unsigned char *)destp;
-+ cp+=3;
-+ HASH_PUSH_BYTE(cp, entry->rule); // rule
-+
-+ entry->total_dwords = total;
-+
-+ return total;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_build_nat_keys
-+*----------------------------------------------------------------------*/
-+void hash_build_nat_keys(u32 *destp, HASH_ENTRY_T *entry)
-+{
-+ unsigned char *cp;
-+ int i;
-+ unsigned short index;
-+ int total;
-+
-+ memset((void *)destp, 0, HASH_MAX_BYTES);
-+
-+ cp = (unsigned char *)destp + 2;
-+ HASH_PUSH_BYTE(cp, entry->key.port);
-+ cp++;
-+
-+ if (entry->key_present.pppoe_sid || entry->key_present.vlan_id)
-+ {
-+ HASH_PUSH_WORD(cp, entry->key.vlan_id); // low word
-+ HASH_PUSH_WORD(cp, entry->key.pppoe_sid); // high word
-+ }
-+
-+ HASH_PUSH_BYTE(cp, entry->key.ip_protocol);
-+ cp+=3;
-+
-+ // input (entry->key.sip[i]) is network-oriented
-+ // output (hash key) is host-oriented
-+ for (i=3; i>=0; i--)
-+ HASH_PUSH_BYTE(cp, entry->key.sip[i]);
-+
-+ // input (entry->key.sip[i]) is network-oriented
-+ // output (hash key) is host-oriented
-+ for (i=3; i>=0; i--)
-+ HASH_PUSH_BYTE(cp, entry->key.dip[i]);
-+
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[0]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[1]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[2]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[3]);
-+
-+ // get hash index
-+ total = (u32)((u32)cp - (u32)destp) / (sizeof(u32));
-+
-+ index = hash_gen_crc16((unsigned char *)destp, total * 4);
-+ entry->index = index & ((1 << HASH_BITS) - 1);
-+
-+ cp = (unsigned char *)destp;
-+ cp+=3;
-+ HASH_PUSH_BYTE(cp, entry->rule); // rule
-+
-+ entry->total_dwords = total;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_build_toe_keys
-+*----------------------------------------------------------------------*/
-+int hash_build_toe_keys(u32 *destp, HASH_ENTRY_T *entry)
-+{
-+ unsigned long data;
-+ unsigned char *cp;
-+ unsigned short index;
-+ int i;
-+ int total;
-+ //printk("%s\n", __func__);
-+ memset((void*)destp, 0, HASH_MAX_BYTES);
-+ cp = (unsigned char*)destp;
-+
-+ if(entry->key_present.port || entry->key_present.Ethertype) {
-+ data = (entry->key.port << 16) + entry->key.Ethertype;
-+ HASH_PUSH_DWORD(cp, data);
-+ } else
-+ HASH_PUSH_DWORD(cp, 0);
-+
-+ if (entry->key_present.da || entry->key_present.sa) {
-+ unsigned char mac[4];
-+ if (entry->key_present.da) {
-+ data = (entry->key.da[0]) + (entry->key.da[1] << 8) +
-+ (entry->key.da[2] << 16) + (entry->key.da[3] <<24);
-+ HASH_PUSH_DWORD(cp, data);
-+ }
-+ mac[0] = (entry->key_present.da) ? entry->key.da[4] : 0;
-+ mac[1] = (entry->key_present.da) ? entry->key.da[5] : 0;
-+ mac[2] = (entry->key_present.sa) ? entry->key.sa[0] : 0;
-+ mac[3] = (entry->key_present.sa) ? entry->key.sa[1] : 0;
-+ data = mac[0] + (mac[1]<<8) + (mac[2]<<16) + (mac[3]<<24);
-+ HASH_PUSH_DWORD(cp, data);
-+ if (entry->key_present.sa) {
-+ data = (entry->key.sa[2]) + (entry->key.sa[3] << 8) +
-+ (entry->key.sa[4] << 16) + (entry->key.sa[5] <<24);
-+ HASH_PUSH_DWORD(cp, data);
-+ }
-+ }
-+
-+ if (entry->key_present.ip_protocol) {
-+ unsigned char ip_protocol;
-+ ip_protocol = entry->key.ip_protocol;
-+ data = ip_protocol;
-+ HASH_PUSH_DWORD(cp, data);
-+ }
-+
-+ if (entry->key_present.ipv6_flow_label) {
-+ unsigned long flow_label;
-+ flow_label = entry->key.ipv6_flow_label;
-+ data = flow_label & 0xfffff;
-+ HASH_PUSH_DWORD(cp, data);
-+ }
-+
-+ if (entry->key_present.sip) {
-+ {
-+ data = IPIV(entry->key.sip[0], entry->key.sip[1],
-+ entry->key.sip[2], entry->key.sip[3]);
-+ HASH_PUSH_DWORD(cp, data);
-+ if (entry->key.ipv6) {
-+ for (i=4; i<16; i+=4) {
-+ data = IPIV(entry->key.sip[i+0], entry->key.sip[i+1],
-+ entry->key.sip[i+2], entry->key.sip[i+3]);
-+ HASH_PUSH_DWORD(cp, data);
-+ }
-+ }
-+ }
-+ }
-+
-+ if (entry->key_present.dip) {
-+ {
-+ data = IPIV(entry->key.dip[0], entry->key.dip[1],
-+ entry->key.dip[2], entry->key.dip[3]);
-+ HASH_PUSH_DWORD(cp, data);
-+ if (entry->key.ipv6) {
-+ for (i=4; i<16; i+=4) {
-+ data = IPIV(entry->key.dip[i+0], entry->key.dip[i+1],
-+ entry->key.dip[i+2], entry->key.dip[i+3]);
-+ HASH_PUSH_DWORD(cp, data);
-+ }
-+ }
-+ }
-+ }
-+ if (entry->key_present.l4_bytes_0_3)
-+ {
-+ unsigned char *datap;
-+ datap = &entry->key.l4_bytes[0];
-+ data = datap[0] + (datap[1] << 8) + (datap[2] << 16) + (datap[3] << 24);
-+ HASH_PUSH_DWORD(cp, data);
-+ }
-+ if (entry->key_present.l7_bytes_0_3)
-+ {
-+ unsigned char *datap;
-+ datap = &entry->key.l7_bytes[0];
-+ data = datap[0] + (datap[1] << 8) + (datap[2] << 16) + (datap[3] << 24);
-+ HASH_PUSH_DWORD(cp, data);
-+ }
-+ if (entry->key_present.l7_bytes_4_7)
-+ {
-+ unsigned char *datap;
-+ datap = &entry->key.l7_bytes[4];
-+ data = datap[0] + (datap[1] << 8) + (datap[2] << 16) + (datap[3] << 24);
-+ HASH_PUSH_DWORD(cp, data);
-+ }
-+
-+ total = (unsigned long)((unsigned long)cp - (unsigned long)destp) / (sizeof(u32));
-+ if (total > HASH_MAX_KEY_DWORD) {
-+ //printf("Total key words (%d) is too large (> %d)!\n",
-+ // total, HASH_MAX_KEY_DWORD);
-+ return -1;
-+ }
-+ index = hash_gen_crc16((unsigned char*)(destp + 1), (total-1)*4);
-+ entry->index = index & ((1 << HASH_BITS)-1);
-+
-+ cp = (unsigned char*) destp;
-+ cp += 3;
-+ HASH_PUSH_BYTE(cp, entry->rule);
-+ entry->total_dwords = total;
-+ return total;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_add_toe_entry
-+*----------------------------------------------------------------------*/
-+int hash_add_toe_entry(HASH_ENTRY_T *entry)
-+{
-+ int rc;
-+ u32 key[HASH_MAX_DWORDS];
-+
-+ rc = hash_build_toe_keys((u32 *)&key, entry);
-+ if (rc < 0)
-+ return -1;
-+ hash_write_entry(entry, (unsigned char*) &key[0]);
-+ //hash_dump_entry(entry->index);
-+// hash_set_valid_flag(entry->index, 1);
-+// printk("Dump hash key!\n");
-+// dump_hash_key(entry);
-+ return entry->index;
-+}
-+
-+
-+/*----------------------------------------------------------------------
-+* hash_write_entry
-+*----------------------------------------------------------------------*/
-+int hash_write_entry(HASH_ENTRY_T *entry, unsigned char *key)
-+{
-+ int i;
-+ u32 *srcep, *destp, *destp2;
-+
-+ srcep = (u32 *)key;
-+ destp2 = destp = (u32 *)&hash_tables[entry->index][0];
-+
-+ for (i=0; i<(entry->total_dwords); i++, srcep++, destp++)
-+ *destp = *srcep;
-+
-+ srcep = (u32 *)&entry->action;
-+ *destp++ = *srcep;
-+
-+ srcep = (u32 *)&entry->param;
-+ for (i=0; i<(sizeof(ENTRY_PARAM_T)/sizeof(*destp)); i++, srcep++, destp++)
-+ *destp = *srcep;
-+
-+ memset(destp, 0, (HASH_MAX_DWORDS-entry->total_dwords-HASH_ACTION_DWORDS) * sizeof(u32));
-+
-+ consistent_sync(destp2, (entry->total_dwords+HASH_ACTION_DWORDS) * 4, PCI_DMA_TODEVICE);
-+ return 0;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_timer_func
-+*----------------------------------------------------------------------*/
-+static void hash_timer_func(u32 data)
-+{
-+ int i, j, idx;
-+ volatile u32 *own_p, *valid_p;
-+ u32 own_bits, a_bits;
-+ int period = HASH_TIMER_PERIOD;
-+
-+ valid_p = (volatile u32 *)TOE_V_BIT_BASE;
-+ own_p = (volatile u32 *)hash_nat_owner_bits;
-+ for (i=0, idx=0; i<(HASH_TOTAL_ENTRIES/32); i++, own_p++, valid_p++, idx+=32)
-+ {
-+ a_bits = readl(TOE_A_BIT_BASE + (i*4));
-+ own_bits = *own_p;
-+ if (own_bits)
-+ {
-+ for (j=0; own_bits && j<32; j++)
-+ {
-+ if (own_bits & 1)
-+ {
-+ short *counter_p, *interval_p;
-+ NAT_HASH_ENTRY_T *nat_entry;
-+ GRE_HASH_ENTRY_T *gre_entry;
-+ nat_entry = (NAT_HASH_ENTRY_T *)hash_get_entry(idx+j);
-+ gre_entry = (GRE_HASH_ENTRY_T *)nat_entry;
-+ if (nat_entry->key.ip_protocol == IPPROTO_GRE)
-+ {
-+ counter_p = (short *)&gre_entry->tmo.counter;
-+ interval_p = (short *)&gre_entry->tmo.interval;
-+ }
-+ else
-+ {
-+ counter_p = (short *)&nat_entry->tmo.counter;
-+ interval_p = (short *)&nat_entry->tmo.interval;
-+ }
-+ if (a_bits & 1)
-+ {
-+ *counter_p = *interval_p;
-+ }
-+ else
-+ {
-+ *counter_p -= HASH_TIMER_PERIOD;
-+ if (*counter_p <= 0)
-+ {
-+ *valid_p &= ~(1 << j); // invalidate it
-+ *own_p &= ~(1 << j); // release ownership for NAT
-+ *counter_p = 0;
-+ // hash_printf("%lu %s: Clear hash index: %d\n", jiffies/HZ, __func__, i*32+j);
-+ }
-+ else if (period > *counter_p)
-+ {
-+ period = *counter_p;
-+ }
-+ }
-+ }
-+ a_bits >>= 1;
-+ own_bits >>=1;
-+ }
-+ }
-+ }
-+
-+ hash_timer_obj.expires = jiffies + (period * HZ);
-+ add_timer((struct timer_list *)data);
-+}
-+
-+/*----------------------------------------------------------------------
-+* dm_long
-+*----------------------------------------------------------------------*/
-+void dm_long(u32 location, int length)
-+{
-+ u32 *start_p, *curr_p, *end_p;
-+ u32 *datap, data;
-+ int i;
-+
-+ //if (length > 1024)
-+ // length = 1024;
-+
-+ start_p = (u32 *)location;
-+ end_p = (u32 *)location + length;
-+ curr_p = (u32 *)((u32)location & 0xfffffff0);
-+ datap = (u32 *)location;
-+ while (curr_p < end_p)
-+ {
-+ hash_printf("0x%08x: ",(u32)curr_p & 0xfffffff0);
-+ for (i=0; i<4; i++)
-+ {
-+ if (curr_p < start_p || curr_p >= end_p)
-+ hash_printf(" ");
-+ else
-+ {
-+ data = *datap;
-+ hash_printf("%08X ", data);
-+ }
-+ if (i==1)
-+ hash_printf("- ");
-+
-+ curr_p++;
-+ datap++;
-+ }
-+ hash_printf("\n");
-+ }
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_dump_entry
-+*----------------------------------------------------------------------*/
-+void hash_dump_entry(int index)
-+{
-+ hash_printf("Hash Index %d:\n", index);
-+ dm_long((u32)&hash_tables[index][0], HASH_MAX_DWORDS);
-+}
-+
-+
---- /dev/null
-+++ b/drivers/net/sl351x_nat.c
-@@ -0,0 +1,1736 @@
-+/****************************************************************************
-+* Copyright 2006 StorLink Semiconductors, Inc. All rights reserved.
-+*----------------------------------------------------------------------------
-+* Name : sl351x_nat.c
-+* Description :
-+* Handle Storlink SL351x NAT Functions
-+*
-+*
-+* Packet Flow:
-+*
-+* (xmit)+<--- SW NAT -->+(xmit)
-+* | ^^ |
-+* | || |
-+* | || |
-+* Client <---> GMAC-x HW-NAT GMAC-y <---> Server
-+*
-+*
-+* History
-+*
-+* Date Writer Description
-+*----------------------------------------------------------------------------
-+* 03/13/2006 Gary Chen Create and implement
-+*
-+*
-+****************************************************************************/
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/compiler.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/ioport.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/rtnetlink.h>
-+#include <linux/delay.h>
-+#include <linux/ethtool.h>
-+#include <linux/mii.h>
-+#include <linux/completion.h>
-+#include <asm/hardware.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/semaphore.h>
-+#include <asm/arch/irqs.h>
-+#include <asm/arch/it8712.h>
-+#include <linux/mtd/kvctl.h>
-+#include <linux/skbuff.h>
-+#include <linux/if_ether.h>
-+#include <linux/if_pppox.h>
-+#include <linux/in.h>
-+#include <linux/ip.h>
-+#include <linux/tcp.h>
-+#include <linux/udp.h>
-+#include <linux/ppp_defs.h>
-+
-+#define MIDWAY
-+#define SL_LEPUS
-+
-+#include <asm/arch/sl2312.h>
-+#include <asm/arch/sl351x_gmac.h>
-+#include <asm/arch/sl351x_hash_cfg.h>
-+#include <asm/arch/sl351x_nat_cfg.h>
-+#ifdef CONFIG_NETFILTER
-+// #include <linux/netfilter/nf_conntrack.h>
-+#include <linux/netfilter/nf_conntrack_tcp.h>
-+#endif
-+
-+//#define NAT_DEBUG_MSG 1
-+#define _NOT_CHECK_SIP_DIP
-+//#define SL351x_NAT_TEST_BY_SMARTBITS 1 // Initialize 32 hash entries and test by SmartBITS
-+#define VITESSE_G5SWITCH 1
-+
-+#ifdef CONFIG_SL351x_NAT
-+
-+/*----------------------------------------------------------------------
-+* Definition
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL3516_ASIC
-+#define CONFIG_SL351x_NAT_TCP_UDP
-+#define CONFIG_SL351x_NAT_GRE
-+#define CONFIG_SL351x_TCP_UDP_RULE_ID 0
-+#define CONFIG_SL351x_GRE_RULE_ID 1
-+#else
-+#define CONFIG_SL351x_NAT_TCP_UDP
-+//#define CONFIG_SL351x_NAT_GRE
-+#define CONFIG_SL351x_TCP_UDP_RULE_ID 0
-+#define CONFIG_SL351x_GRE_RULE_ID 0
-+#endif
-+
-+#define nat_printf printk
-+#define NAT_FTP_CTRL_PORT (21) // TCP
-+#define NAT_H323_PORT (1720) // TCP
-+#define NAT_T120_PORT (1503) // TCP
-+#define NAT_PPTP_PORT (1723) // TCP
-+#define NAT_TFTP_PORT (69) // UDP
-+#define NAT_DNS_PORT (53) // UDP
-+#define NAT_NTP_PORT (123) // UDP
-+#define NAT_RAS_PORT (1719) // UDP
-+#define NAT_BOOTP67_PORT (67) // UDP
-+#define NAT_BOOTP68_PORT (68) // UDP
-+
-+#define NAT_TCP_PORT_MAX 64
-+#define NAT_UDP_PORT_MAX 64
-+
-+#define GRE_PROTOCOL (0x880b)
-+#define GRE_PROTOCOL_SWAP __constant_htons(0x880b)
-+
-+#ifdef VITESSE_G5SWITCH
-+extern int Giga_switch;
-+#endif
-+
-+typedef struct
-+{
-+ u16 flags_ver;
-+ u16 protocol;
-+ u16 payload_length;
-+ u16 call_id;
-+ u32 seq;
-+ u32 ack;
-+} GRE_PKTHDR_T;
-+
-+/*----------------------------------------------------------------------
-+* NAT Configuration
-+*
-+* Note: Any change for network setting, the NAT configuration should
-+* be changed also.
-+* cfg->lan_port 0 if GMAC-0, 1: if GMAC-1
-+* cfg->wan_port 0 if GMAC-0, 1: if GMAC-1
-+* cfg->lan_ipaddr, cfg->lan_gateway, cfg->lan_netmask
-+* cfg->wan_ipaddr, cfg->wan_gateway, cfg->wan_netmask
-+*
-+*----------------------------------------------------------------------*/
-+NAT_CFG_T nat_cfg;
-+static int nat_initialized;
-+u32 nat_collision;
-+
-+#ifdef CONFIG_SL351x_NAT_TCP_UDP
-+static u16 fixed_tcp_port_list[]={NAT_FTP_CTRL_PORT,
-+ NAT_H323_PORT,
-+ // NAT_T120_PORT,
-+ NAT_PPTP_PORT,
-+ 0};
-+static u16 fixed_udp_port_list[]={NAT_DNS_PORT,
-+ NAT_NTP_PORT,
-+ NAT_TFTP_PORT,
-+ NAT_RAS_PORT,
-+ NAT_BOOTP67_PORT,
-+ NAT_BOOTP68_PORT,
-+ 0};
-+#endif
-+
-+// #define _HAVE_DYNAMIC_PORT_LIST
-+#ifdef _HAVE_DYNAMIC_PORT_LIST
-+static u16 dynamic_tcp_port_list[NAT_TCP_PORT_MAX+1];
-+static u16 dynamic_udp_port_list[NAT_UDP_PORT_MAX+1]};
-+#endif
-+
-+/*----------------------------------------------------------------------
-+* Functions
-+*----------------------------------------------------------------------*/
-+int sl351x_nat_tcp_udp_output(struct sk_buff *skb, int port);
-+int sl351x_nat_udp_output(struct sk_buff *skb, int port);
-+int sl351x_nat_gre_output(struct sk_buff *skb, int port);
-+
-+extern int mac_set_rule_reg(int mac, int rule, int enabled, u32 reg0, u32 reg1, u32 reg2);
-+extern void hash_dump_entry(int index);
-+extern void mac_get_hw_tx_weight(struct net_device *dev, char *weight);
-+extern void mac_set_hw_tx_weight(struct net_device *dev, char *weight);
-+
-+#ifdef SL351x_NAT_TEST_BY_SMARTBITS
-+static void nat_init_test_entry(void);
-+#endif
-+/*----------------------------------------------------------------------
-+* sl351x_nat_init
-+* initialize a NAT matching rule
-+* Called by SL351x Driver
-+* key : port, protocol, Sip, Dip, Sport, Dport
-+* Action : Srce Q: HW Free Queue,
-+* Dest Q: HW TxQ
-+* Change DA
-+* Change SA
-+* Change Sip or Dip
-+* Change Sport or Dport
-+*----------------------------------------------------------------------*/
-+void sl351x_nat_init(void)
-+{
-+ int rc;
-+ GMAC_MRxCR0_T mrxcr0;
-+ GMAC_MRxCR1_T mrxcr1;
-+ GMAC_MRxCR2_T mrxcr2;
-+ NAT_CFG_T *cfg;
-+
-+ if (nat_initialized)
-+ return;
-+
-+ nat_initialized = 1;
-+
-+ if ((sizeof(NAT_HASH_ENTRY_T) > HASH_MAX_BYTES) ||
-+ (sizeof(GRE_HASH_ENTRY_T) > HASH_MAX_BYTES))
-+ {
-+ nat_printf("NAT_HASH_ENTRY_T structure Size is too larger!\n");
-+ while(1);
-+ }
-+
-+ cfg = (NAT_CFG_T *)&nat_cfg;
-+ memset((void *)cfg, 0, sizeof(NAT_CFG_T));
-+#ifdef _HAVE_DYNAMIC_PORT_LIST
-+ memset((void *)dynamic_tcp_port_list, 0, sizeof(dynamic_tcp_port_list));
-+ memset((void *)dynamic_udp_port_list, 0, sizeof(dynamic_udp_port_list));
-+#endif
-+
-+#ifdef VITESSE_G5SWITCH
-+ if(Giga_switch)
-+ {
-+ cfg->enabled = 1;
-+ cfg->tcp_udp_rule_id = CONFIG_SL351x_TCP_UDP_RULE_ID;
-+ cfg->gre_rule_id = CONFIG_SL351x_GRE_RULE_ID;
-+ cfg->lan_port = 1;
-+ cfg->wan_port = 0;
-+ cfg->default_hw_txq = 3;
-+ cfg->tcp_tmo_interval = 60;
-+ cfg->udp_tmo_interval = 180;
-+ cfg->gre_tmo_interval = 60;
-+ }
-+ else
-+ {
-+ cfg->enabled = 1;
-+ cfg->tcp_udp_rule_id = CONFIG_SL351x_TCP_UDP_RULE_ID;
-+ cfg->gre_rule_id = CONFIG_SL351x_GRE_RULE_ID;
-+ cfg->lan_port = 0;
-+ cfg->wan_port = 1;
-+ cfg->default_hw_txq = 3;
-+ cfg->tcp_tmo_interval = 60;
-+ cfg->udp_tmo_interval = 180;
-+ cfg->gre_tmo_interval = 60;
-+
-+ }
-+#endif
-+
-+#if 1 // debug purpose
-+ cfg->ipcfg[0].total = 1;
-+ cfg->ipcfg[0].entry[0].ipaddr = IPIV(192,168,2,92);
-+ cfg->ipcfg[0].entry[0].netmask = IPIV(255,255,255,0);
-+ cfg->ipcfg[1].total = 1;
-+ cfg->ipcfg[1].entry[0].ipaddr = IPIV(192,168,1,200);
-+ cfg->ipcfg[1].entry[0].netmask = IPIV(255,255,255,0);
-+#endif
-+
-+#if 1
-+ cfg->xport.total = 0;
-+#else
-+ cfg->xport.total = 4;
-+
-+ // H.323/H.225 Call setup
-+ cfg->xport.entry[0].protocol = IPPROTO_TCP;
-+ cfg->xport.entry[0].sport_start = 0;
-+ cfg->xport.entry[0].sport_end = 0;
-+ cfg->xport.entry[0].dport_start = 1720;
-+ cfg->xport.entry[0].dport_end = 1720;
-+ cfg->xport.entry[1].protocol = IPPROTO_TCP;
-+ cfg->xport.entry[1].sport_start = 1720;
-+ cfg->xport.entry[1].sport_end = 1720;
-+ cfg->xport.entry[1].dport_start = 0;
-+ cfg->xport.entry[1].dport_end = 0;
-+
-+ // RAS Setup
-+ cfg->xport.entry[2].protocol = IPPROTO_UDP;
-+ cfg->xport.entry[2].sport_start = 0;
-+ cfg->xport.entry[2].sport_end = 0;
-+ cfg->xport.entry[2].dport_start = 1719;
-+ cfg->xport.entry[2].dport_end = 1719;
-+ cfg->xport.entry[3].protocol = IPPROTO_UDP;
-+ cfg->xport.entry[3].sport_start = 1719;
-+ cfg->xport.entry[3].sport_end = 1719;
-+ cfg->xport.entry[3].dport_start = 0;
-+ cfg->xport.entry[3].dport_end = 0;
-+#endif
-+
-+#ifdef CONFIG_SL351x_NAT_TCP_UDP
-+ mrxcr0.bits32 = 0;
-+ mrxcr1.bits32 = 0;
-+ mrxcr2.bits32 = 0;
-+ mrxcr0.bits.port = 1;
-+ mrxcr0.bits.l3 = 1;
-+ mrxcr0.bits.l4 = 1;
-+ mrxcr1.bits.sip = 1;
-+ mrxcr1.bits.dip = 1;
-+ mrxcr1.bits.l4_byte0_15 = 0x0f; // Byte 0-3
-+ mrxcr0.bits.sprx = 3;
-+
-+ rc = mac_set_rule_reg(cfg->lan_port, cfg->tcp_udp_rule_id, 1, mrxcr0.bits32, mrxcr1.bits32, mrxcr2.bits32);
-+ if (rc < 0)
-+ {
-+ nat_printf("NAT Failed to set MAC-%d Rule %d!\n", cfg->lan_port, cfg->tcp_udp_rule_id);
-+ }
-+
-+ if (cfg->lan_port != cfg->wan_port)
-+ {
-+ rc = mac_set_rule_reg(cfg->wan_port, cfg->tcp_udp_rule_id, 1, mrxcr0.bits32, mrxcr1.bits32, mrxcr2.bits32);
-+ if (rc < 0)
-+ {
-+ nat_printf("NAT Failed to set MAC-%d Rule %d!\n", cfg->wan_port, cfg->tcp_udp_rule_id);
-+ }
-+ }
-+#endif
-+
-+#ifdef CONFIG_SL351x_NAT_GRE
-+ mrxcr0.bits32 = 0;
-+ mrxcr1.bits32 = 0;
-+ mrxcr2.bits32 = 0;
-+ mrxcr0.bits.port = 1;
-+ mrxcr0.bits.l3 = 1;
-+ mrxcr0.bits.l4 = 1;
-+ mrxcr1.bits.sip = 1;
-+ mrxcr1.bits.dip = 1;
-+ mrxcr1.bits.l4_byte0_15 = 0xcc; // Byte 2, 3, 6, 7
-+ mrxcr0.bits.sprx = 4; // see GMAC driver about SPR
-+
-+ rc = mac_set_rule_reg(cfg->lan_port, cfg->gre_rule_id, 1, mrxcr0.bits32, mrxcr1.bits32, mrxcr2.bits32);
-+ if (rc < 0)
-+ {
-+ nat_printf("NAT Failed to set MAC-%d Rule %d!\n", cfg->lan_port, cfg->gre_rule_id);
-+ }
-+
-+ if (cfg->lan_port != cfg->wan_port)
-+ {
-+ rc = mac_set_rule_reg(cfg->wan_port, cfg->gre_rule_id, 1, mrxcr0.bits32, mrxcr1.bits32, mrxcr2.bits32);
-+ if (rc < 0)
-+ {
-+ nat_printf("NAT Failed to set MAC-%d Rule %d!\n", cfg->wan_port, cfg->gre_rule_id);
-+ }
-+ }
-+#endif
-+
-+#ifdef SL351x_NAT_TEST_BY_SMARTBITS
-+ nat_init_test_entry();
-+#endif
-+}
-+
-+/*----------------------------------------------------------------------
-+* nat_build_keys
-+* Note: To call this routine, the key->rule_id MUST be zero
-+*----------------------------------------------------------------------*/
-+static inline int nat_build_keys(NAT_KEY_T *key)
-+{
-+ return hash_gen_crc16((unsigned char *)key, NAT_KEY_SIZE) & HASH_BITS_MASK;
-+}
-+
-+/*----------------------------------------------------------------------
-+* gre_build_keys
-+* Note: To call this routine, the key->rule_id MUST be zero
-+*----------------------------------------------------------------------*/
-+static inline int gre_build_keys(GRE_KEY_T *key)
-+{
-+ return hash_gen_crc16((unsigned char *)key, GRE_KEY_SIZE) & HASH_BITS_MASK;
-+}
-+
-+/*----------------------------------------------------------------------
-+* nat_write_hash_entry
-+*----------------------------------------------------------------------*/
-+static inline int nat_write_hash_entry(int index, void *hash_entry)
-+{
-+ int i;
-+ u32 *srcep, *destp, *destp2;
-+
-+ srcep = (u32 *)hash_entry;
-+ destp = destp2 = (u32 *)&hash_tables[index][0];
-+
-+ for (i=0; i<(NAT_HASH_ENTRY_SIZE/sizeof(u32)); i++)
-+ *destp++ = *srcep++;
-+
-+ consistent_sync(destp2, NAT_HASH_ENTRY_SIZE, PCI_DMA_TODEVICE);
-+ return 0;
-+}
-+
-+/*----------------------------------------------------------------------
-+* gre_write_hash_entry
-+*----------------------------------------------------------------------*/
-+static inline int gre_write_hash_entry(int index, void *hash_entry)
-+{
-+ int i;
-+ u32 *srcep, *destp, *destp2;
-+
-+ srcep = (u32 *)hash_entry;
-+ destp = destp2 = (u32 *)&hash_tables[index][0];
-+
-+ for (i=0; i<(GRE_HASH_ENTRY_SIZE/sizeof(u32)); i++)
-+ *destp++ = *srcep++;
-+
-+ consistent_sync(destp2, GRE_HASH_ENTRY_SIZE, PCI_DMA_TODEVICE);
-+ return 0;
-+}
-+
-+/*----------------------------------------------------------------------
-+* sl351x_nat_find_ipcfg
-+* return NULL if not found
-+*----------------------------------------------------------------------*/
-+static NAT_IP_ENTRY_T *sl351x_nat_find_ipcfg(u32 ipaddr, int port)
-+{
-+ int i;
-+ NAT_IP_ENTRY_T *ipcfg;
-+
-+ ipcfg = (NAT_IP_ENTRY_T *)&nat_cfg.ipcfg[port].entry[0];
-+ for (i=0; i<nat_cfg.ipcfg[port].total; i++, ipcfg++)
-+ {
-+ if (ipaddr == ipcfg->ipaddr)
-+ {
-+ return ipcfg;
-+ }
-+ }
-+ return NULL;
-+}
-+
-+/*----------------------------------------------------------------------
-+* sl351x_nat_assign_qid
-+*----------------------------------------------------------------------*/
-+static int sl351x_nat_assign_qid(u8 proto, u32 sip, u32 dip, u16 sport, u16 dport)
-+{
-+ int i, total, qid;
-+ NAT_WRULE_ENTRY_T *entry;
-+
-+ for (qid = 0; qid<CONFIG_NAT_TXQ_NUM; qid++)
-+ {
-+ if (qid == nat_cfg.default_hw_txq)
-+ continue;
-+
-+ entry = (NAT_WRULE_ENTRY_T *)&nat_cfg.wrule[qid].entry[0];
-+ total = nat_cfg.wrule[qid].total;
-+ for (i=0; i<total; i++, entry++)
-+ {
-+ if (!entry->protocol || entry->protocol==proto)
-+ {
-+ //if (!entry->sip_start && !entry->dip_start && !entry->sport_start && !entry->dport_start)
-+ // continue; // UI take care
-+ if (entry->sip_start && !((sip >= entry->sip_start) &&
-+ (sip <= entry->sip_end)))
-+ continue;
-+ if (entry->dip_start && !((dip >= entry->dip_start) &&
-+ (dip <= entry->dip_end)))
-+ continue;
-+ if (entry->sport_start && !((sport >= entry->sport_start) &&
-+ (sport <= entry->sport_end)))
-+ continue;
-+ if (entry->dport_start && !((dport >= entry->dport_start)
-+ && (dport <= entry->dport_end)))
-+ continue;
-+ return qid;
-+ }
-+ }
-+ }
-+ return nat_cfg.default_hw_txq;
-+}
-+
-+/*----------------------------------------------------------------------
-+* sl351x_nat_input
-+* Handle NAT input frames
-+* Called by SL351x Driver - Handle Default Rx Queue
-+* Notes: The caller must make sure that the l3off & l4offset should not be zero.
-+* SL351x NAT Frames should meet the following conditions:
-+* 1. TCP or UDP frame
-+* 2. Cannot be special ALGs ports which TCP/UDP data is updated
-+* 3. LAN-IN Frames:
-+* Source IP is in the LAN subnet and Destination is not in the LAN subnet
-+* 4. WAN-IN Frames
-+* Destination IP is in the WAN port IP
-+*
-+* Example Ports
-+* 1. TCP/UDP data is updated
-+* (a) FTP Control Packet
-+* (b) VoIP Packets
-+* (c) etc. (add in future)
-+* 2. UDP Low packet rate, not worth
-+* (b) TFTP Destination Port is 69
-+* (b) DNS 53
-+* (c) NTP 123
-+* (d) etc. (add in future)
-+*----------------------------------------------------------------------*/
-+void sl351x_nat_input(struct sk_buff *skb, int port, void *l3off, void *l4off)
-+{
-+ int i, found;
-+ u32 sip, dip;
-+ u16 sport, dport;
-+ struct ethhdr *ether_hdr;
-+ struct iphdr *ip_hdr;
-+ struct tcphdr *tcp_hdr;
-+ struct pppoe_hdr *pppoe_hdr;
-+ NAT_CB_T *nat_cb;
-+ u8 proto, pppoe_frame=0;
-+ NAT_CFG_T *cfg;
-+ u16 ppp_proto;
-+ NAT_IP_ENTRY_T *ipcfg;
-+ NAT_XPORT_ENTRY_T *xentry;
-+ GRE_PKTHDR_T *gre_hdr;
-+#ifdef CONFIG_SL351x_NAT_TCP_UDP
-+ u16 *port_ptr;
-+#endif
-+
-+ cfg = (NAT_CFG_T *)&nat_cfg;
-+ if (!cfg->enabled || !cfg->ipcfg[port].total)
-+ return;
-+
-+ ip_hdr = (struct iphdr *)&(skb->data[(u32)l3off]);
-+ proto = ip_hdr->protocol;
-+
-+ tcp_hdr = (struct tcphdr *)&(skb->data[(u32)l4off]);
-+ gre_hdr = (GRE_PKTHDR_T *)tcp_hdr;
-+ sport = ntohs(tcp_hdr->source);
-+ dport = ntohs(tcp_hdr->dest);
-+
-+ sip = ntohl(ip_hdr->saddr);
-+ dip = ntohl(ip_hdr->daddr);
-+
-+ if (dip == IPIV(255,255,255,255))
-+ return;
-+
-+ if (port == cfg->lan_port)
-+ {
-+ ipcfg = (NAT_IP_ENTRY_T *)&cfg->ipcfg[port].entry[0];
-+ for (i=0, found=0; i<cfg->ipcfg[port].total; i++, ipcfg++)
-+ {
-+ u32 subnet = ipcfg->ipaddr & ipcfg->netmask;
-+ if (((sip & ipcfg->netmask) == subnet) &&
-+ ((dip & ipcfg->netmask) != subnet))
-+ {
-+ found = 1;
-+ break;
-+ }
-+ }
-+ if (!found)
-+ return;
-+ }
-+ else
-+ {
-+#ifndef _NOT_CHECK_SIP_DIP // enable it if know and get the wan ip address
-+ if (!sl351x_nat_find_ipcfg(dip, port))
-+ {
-+ printk("WAN->LAN Incorrect Dip %d.%d.%d.%d\n", HIPQUAD(dip));
-+ return;
-+ }
-+#endif
-+ ether_hdr = (struct ethhdr *)skb->data;
-+ pppoe_hdr = (struct pppoe_hdr *)(ether_hdr + 1);
-+ ppp_proto = *(u16 *)&pppoe_hdr->tag[0];
-+ if (ether_hdr->h_proto == __constant_htons(ETH_P_PPP_SES) // 0x8864
-+ && ppp_proto == __constant_htons(PPP_IP) ) // 0x21
-+ {
-+ pppoe_frame = 1;
-+ }
-+ }
-+
-+#ifdef CONFIG_SL351x_NAT_TCP_UDP
-+ if (proto == IPPROTO_TCP)
-+ {
-+#ifdef NAT_DEBUG_MSG
-+ nat_printf("From GMAC-%d: 0x%-4X TCP %d.%d.%d.%d [%d] --> %d.%d.%d.%d [%d]",
-+ port, ntohs(ip_hdr->id),
-+ NIPQUAD(ip_hdr->saddr), sport,
-+ NIPQUAD(ip_hdr->daddr), dport);
-+ if (tcp_flag_word(tcp_hdr) & TCP_FLAG_SYN) nat_printf(" SYN");
-+ if (tcp_flag_word(tcp_hdr) & TCP_FLAG_FIN) nat_printf(" FIN");
-+ if (tcp_flag_word(tcp_hdr) & TCP_FLAG_RST) nat_printf(" RST");
-+ if (tcp_flag_word(tcp_hdr) & TCP_FLAG_ACK) nat_printf(" ACK");
-+ nat_printf("\n");
-+#endif
-+ // if (tcp_flag_word(tcp_hdr) & (TCP_FLAG_SYN | TCP_FLAG_FIN | TCP_FLAG_RST))
-+ if (tcp_flag_word(tcp_hdr) & (TCP_FLAG_SYN))
-+ {
-+ return;
-+ }
-+ port_ptr = fixed_tcp_port_list;
-+ for (i=0; *port_ptr; i++, port_ptr++)
-+ {
-+ if (sport == *port_ptr || dport == *port_ptr)
-+ return;
-+ }
-+#ifdef _HAVE_DYNAMIC_PORT_LIST
-+ port_ptr = dynamic_tcp_port_list;
-+ for (i=0; *port_ptr; i++, port_ptr++)
-+ {
-+ if (sport == *port_ptr || dport == *port_ptr)
-+ return;
-+ }
-+#endif
-+ }
-+ else if (proto == IPPROTO_UDP)
-+ {
-+#ifdef NAT_DEBUG_MSG
-+ nat_printf("From GMAC-%d: 0x%-4X UDP %d.%d.%d.%d [%d] --> %d.%d.%d.%d [%d]",
-+ port, ntohs(ip_hdr->id),
-+ NIPQUAD(ip_hdr->saddr), sport,
-+ NIPQUAD(ip_hdr->daddr), dport);
-+ nat_printf("\n");
-+#endif
-+ port_ptr = fixed_udp_port_list;
-+ for (i=0; *port_ptr; i++, port_ptr++)
-+ {
-+ if (sport == *port_ptr || dport == *port_ptr)
-+ return;
-+ }
-+#ifdef _HAVE_DYNAMIC_PORT_LIST
-+ port_ptr = dynamic_udp_port_list;
-+ for (i=0; *port_ptr; i++, port_ptr++)
-+ {
-+ if (sport == *port_ptr || dport == *port_ptr)
-+ return;
-+ }
-+#endif
-+ }
-+ else
-+#endif // CONFIG_SL351x_NAT_TCP_UDP
-+#ifdef CONFIG_SL351x_NAT_GRE
-+ if (proto == IPPROTO_GRE)
-+ {
-+ if (gre_hdr->protocol != GRE_PROTOCOL_SWAP)
-+ return;
-+#ifdef NAT_DEBUG_MSG
-+ nat_printf("From GMAC-%d: 0x%-4X GRE %d.%d.%d.%d [%d] --> %d.%d.%d.%d",
-+ port, ntohs(ip_hdr->id),
-+ NIPQUAD(ip_hdr->saddr), ntohs(gre_hdr->call_id),
-+ NIPQUAD(ip_hdr->daddr));
-+ nat_printf("\n");
-+#endif
-+ }
-+ else
-+#endif
-+ return;
-+
-+
-+ // check xport list
-+ xentry = (NAT_XPORT_ENTRY_T *)&cfg->xport.entry[0];
-+ for (i=0; i<cfg->xport.total; i++, xentry++)
-+ {
-+ if (!xentry->protocol || xentry->protocol == proto)
-+ {
-+ //if (!xentry->sport_start && !xentry->dport_start) // UI take care
-+ // continue;
-+ if (xentry->sport_start && !((sport >= xentry->sport_start) &&
-+ (sport <= xentry->sport_end)))
-+ continue;
-+ if (xentry->dport_start && !((dport >= xentry->dport_start)
-+ && (dport <= xentry->dport_end)))
-+ continue;
-+ return;
-+ }
-+ }
-+
-+ nat_cb = NAT_SKB_CB(skb);
-+ if (((u32)nat_cb & 3))
-+ {
-+ nat_printf("%s ERROR! nat_cb is not alignment!!!!!!\n", __func__);
-+ return;
-+ }
-+ nat_cb->tag = NAT_CB_TAG;
-+ memcpy(nat_cb->sa, skb->data+6, 6);
-+ nat_cb->sip = ip_hdr->saddr;
-+ nat_cb->dip = ip_hdr->daddr;
-+ if (proto == IPPROTO_GRE)
-+ {
-+ nat_cb->sport = gre_hdr->protocol;
-+ nat_cb->dport = gre_hdr->call_id;
-+ }
-+ else
-+ {
-+ nat_cb->sport = tcp_hdr->source;
-+ nat_cb->dport = tcp_hdr->dest;
-+ }
-+ nat_cb->pppoe_frame = pppoe_frame;
-+}
-+
-+/*----------------------------------------------------------------------
-+* sl351x_nat_output
-+* Handle NAT output frames
-+* Called by SL351x Driver - Transmit
-+*
-+* 1. If not SL351x NAT frames, return FALSE
-+* 2. LAN-to-WAN frames
-+* (1) Sip must be WAN IP
-+* 3. If TCP SY/RST/FIN frame, return
-+* 4. Build the hash key and get the hash index
-+* 5. If V-Bit is ON, return.
-+* 6. Write hash entry and validate it
-+*
-+*----------------------------------------------------------------------*/
-+int sl351x_nat_output(struct sk_buff *skb, int port)
-+{
-+ struct iphdr *ip_hdr;
-+ u8 proto;
-+ NAT_CB_T *nat_cb;
-+
-+ nat_cb = NAT_SKB_CB(skb);
-+ if (nat_cb->tag != NAT_CB_TAG)
-+ return 0;
-+
-+ if (((u32)nat_cb & 3))
-+ {
-+ nat_printf("%s ERROR! nat_cb is not alignment!!!!!!\n", __func__);
-+ return 0;
-+ }
-+ ip_hdr = (struct iphdr *)skb->h.ipiph;
-+ proto = ip_hdr->protocol;
-+
-+ switch (proto)
-+ {
-+ case IPPROTO_TCP:
-+ case IPPROTO_UDP:
-+ return sl351x_nat_tcp_udp_output(skb, port);
-+ case IPPROTO_GRE:
-+ return sl351x_nat_gre_output(skb, port);
-+ }
-+ return 0;
-+}
-+
-+/*----------------------------------------------------------------------
-+* sl351x_nat_tcp_udp_output
-+* Handle NAT TCP/UDP output frames
-+*----------------------------------------------------------------------*/
-+int sl351x_nat_tcp_udp_output(struct sk_buff *skb, int port)
-+{
-+ u32 sip, dip;
-+ struct ethhdr *ether_hdr;
-+ struct iphdr *ip_hdr;
-+ struct tcphdr *tcp_hdr;
-+ struct pppoe_hdr *pppoe_hdr;
-+ NAT_CB_T *nat_cb;
-+ NAT_CFG_T *cfg;
-+ u8 proto;
-+ u16 sport, dport, ppp_proto;
-+ u32 hash_data[HASH_MAX_DWORDS];
-+ NAT_HASH_ENTRY_T *hash_entry;
-+ int hash_index;
-+ struct ip_conntrack *nat_ip_conntrack;
-+ enum ip_conntrack_info ctinfo;
-+
-+ nat_cb = NAT_SKB_CB(skb);
-+ cfg = (NAT_CFG_T *)&nat_cfg;
-+
-+ ether_hdr = (struct ethhdr *)skb->data;
-+ ip_hdr = (struct iphdr *)skb->h.ipiph;
-+ tcp_hdr = (struct tcphdr *)((u32)ip_hdr + (ip_hdr->ihl<<2));
-+ sip = ntohl(ip_hdr->saddr);
-+ dip = ntohl(ip_hdr->daddr);
-+ proto = ip_hdr->protocol;
-+ sport = ntohs(tcp_hdr->source);
-+ dport = ntohs(tcp_hdr->dest);
-+
-+#ifdef NAT_DEBUG_MSG
-+ {
-+ nat_printf("To GMAC-%d: 0x%-4X [%d] %d.%d.%d.%d [%d] --> %d.%d.%d.%d [%d]",
-+ port, ntohs(ip_hdr->id), proto,
-+ NIPQUAD(ip_hdr->saddr), sport,
-+ NIPQUAD(ip_hdr->daddr), dport);
-+ if (proto == IPPROTO_TCP)
-+ {
-+ if (tcp_flag_word(tcp_hdr) & TCP_FLAG_SYN) nat_printf(" SYN");
-+ if (tcp_flag_word(tcp_hdr) & TCP_FLAG_FIN) nat_printf(" FIN");
-+ if (tcp_flag_word(tcp_hdr) & TCP_FLAG_RST) nat_printf(" RST");
-+ if (tcp_flag_word(tcp_hdr) & TCP_FLAG_ACK) nat_printf(" ACK");
-+ }
-+ nat_printf("\n");
-+ }
-+#endif
-+ nat_ip_conntrack = ip_conntrack_get(skb, &ctinfo);
-+ if (!nat_ip_conntrack)
-+ {
-+ nat_printf("IP conntrack info is not found!\n");
-+ return 0;
-+ }
-+ // nat_printf("nat_ip_conntrack = 0x%x, status=0x%lx, ctinfo=%d\n", (u32)nat_ip_conntrack, nat_ip_conntrack->status, ctinfo);
-+ // if (nat_ip_conntrack->master || nat_ip_conntrack->helper)
-+ if (nat_ip_conntrack->helper)
-+ {
-+ nat_printf("Sport=%d Dport=%d master=0x%x, helper=0x%x\n", sport, dport, (u32)nat_ip_conntrack->master, (u32)nat_ip_conntrack->helper);
-+ return 0;
-+ }
-+
-+ //if (proto == IPPROTO_TCP && !(nat_ip_conntrack->status & IPS_ASSURED))
-+ // return 0;
-+
-+#ifdef NAT_DEBUG_MSG
-+ nat_printf("nat_ip_conntrack=0x%x, nat_cb->state=%d\n", (u32)nat_ip_conntrack, nat_cb->state);
-+ nat_printf("lan2wan_hash_index=%d, wan2lan_hash_index=%d\n", nat_ip_conntrack->lan2wan_hash_index, nat_ip_conntrack->wan2lan_hash_index);
-+ nat_printf("lan2wan_collision=%d, wan2lan_collision=%d\n", nat_ip_conntrack->lan2wan_collision, nat_ip_conntrack->wan2lan_collision);
-+#endif
-+ if (proto == IPPROTO_TCP)
-+ {
-+ if (nat_cb->state >= TCP_CONNTRACK_FIN_WAIT && nat_cb->state <= TCP_CONNTRACK_CLOSE)
-+ {
-+ if (nat_ip_conntrack->lan2wan_hash_index)
-+ {
-+#ifdef NAT_DEBUG_MSG
-+ nat_printf("Invalidate LAN->WAN hash entry %d\n", nat_ip_conntrack->lan2wan_hash_index - 1);
-+#endif
-+ hash_nat_disable_owner(nat_ip_conntrack->lan2wan_hash_index - 1);
-+ hash_invalidate_entry(nat_ip_conntrack->lan2wan_hash_index - 1);
-+ nat_ip_conntrack->lan2wan_hash_index = 0;
-+ }
-+ if (nat_ip_conntrack->wan2lan_hash_index)
-+ {
-+#ifdef NAT_DEBUG_MSG
-+ nat_printf("Invalidate WAN->LAN hash entry %d\n", nat_ip_conntrack->wan2lan_hash_index - 1);
-+#endif
-+ hash_nat_disable_owner(nat_ip_conntrack->wan2lan_hash_index - 1);
-+ hash_invalidate_entry(nat_ip_conntrack->wan2lan_hash_index - 1);
-+ nat_ip_conntrack->wan2lan_hash_index = 0;
-+ }
-+ return 0;
-+
-+ }
-+ else if (nat_cb->state != TCP_CONNTRACK_ESTABLISHED)
-+ {
-+ return 0;
-+ }
-+ }
-+ if (proto == IPPROTO_TCP && (tcp_flag_word(tcp_hdr) & (TCP_FLAG_SYN | TCP_FLAG_FIN | TCP_FLAG_RST)))
-+ // if (proto == IPPROTO_TCP && (tcp_flag_word(tcp_hdr) & (TCP_FLAG_SYN)))
-+ return 0;
-+
-+ hash_entry = (NAT_HASH_ENTRY_T *)&hash_data;
-+ if (port == cfg->wan_port) // LAN-to-WAN
-+ {
-+ if (nat_ip_conntrack->lan2wan_hash_index || nat_ip_conntrack->lan2wan_collision)
-+ return 0;
-+#ifndef _NOT_CHECK_SIP_DIP // enable it if know and get the wan ip address
-+ if (!sl351x_nat_find_ipcfg(sip, port))
-+ {
-+ printk("LAN->WAN Incorrect Sip %d.%d.%d.%d\n", HIPQUAD(sip));
-+ return 0;
-+ }
-+#endif
-+ // Note: unused fields (including rule_id) MUST be zero
-+ hash_entry->key.Ethertype = 0;
-+ hash_entry->key.port_id = cfg->lan_port;
-+ hash_entry->key.rule_id = 0;
-+ hash_entry->key.ip_protocol = proto;
-+ hash_entry->key.reserved1 = 0;
-+ hash_entry->key.reserved2 = 0;
-+ hash_entry->key.sip = ntohl(nat_cb->sip);
-+ hash_entry->key.dip = ntohl(nat_cb->dip);
-+ hash_entry->key.sport = nat_cb->sport;
-+ hash_entry->key.dport = nat_cb->dport;
-+
-+ hash_index = nat_build_keys(&hash_entry->key);
-+
-+#ifdef NAT_DEBUG_LAN_HASH_TIMEOUT
-+ if (hash_get_nat_owner_flag(hash_index))
-+ return 0;
-+#endif
-+ if (hash_get_valid_flag(hash_index))
-+ {
-+ nat_ip_conntrack->lan2wan_collision = 1;
-+ nat_collision++;
-+#if 0
-+ if (proto == IPPROTO_TCP && (tcp_flag_word(tcp_hdr) & (TCP_FLAG_FIN | TCP_FLAG_RST)))
-+ {
-+ if (memcmp((void *)&hash_entry->key, hash_get_entry(hash_index), sizeof(NAT_KEY_T)) == 0)
-+ {
-+ hash_nat_disable_owner(hash_index);
-+ hash_invalidate_entry(hash_index); // Must last one, else HW Tx fast SW
-+ // nat_printf("Invalidate nat hash entry %d\n", hash_index);
-+ }
-+ }
-+#endif
-+ return 0;
-+ }
-+
-+ // write hash entry
-+ hash_entry->key.rule_id = cfg->tcp_udp_rule_id;
-+ memcpy(hash_entry->param.da, skb->data, 6);
-+ memcpy(hash_entry->param.sa, skb->data+6, 6);
-+ hash_entry->param.Sip = sip;
-+ hash_entry->param.Dip = dip;
-+ hash_entry->param.Sport = sport;
-+ hash_entry->param.Dport = dport;
-+ hash_entry->param.vlan = 0;
-+ hash_entry->param.sw_id = 0;
-+ hash_entry->param.mtu = 0;
-+ // check PPPoE
-+ pppoe_hdr = (struct pppoe_hdr *)(ether_hdr + 1);
-+ ppp_proto = *(u16 *)&pppoe_hdr->tag[0];
-+ if (ether_hdr->h_proto == __constant_htons(ETH_P_PPP_SES) // 0x8864
-+ && ppp_proto == __constant_htons(PPP_IP) ) // 0x21
-+ {
-+ hash_entry->action.dword = NAT_PPPOE_LAN2WAN_ACTIONS;
-+ hash_entry->param.pppoe = htons(pppoe_hdr->sid);
-+ }
-+ else
-+ {
-+ hash_entry->action.dword = NAT_LAN2WAN_ACTIONS;
-+ hash_entry->param.pppoe = 0;
-+ }
-+ hash_entry->action.bits.dest_qid = sl351x_nat_assign_qid(proto, sip, dip, sport, dport);
-+ hash_entry->action.bits.dest_qid += (cfg->wan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;
-+ hash_entry->tmo.counter = hash_entry->tmo.interval =
-+ (proto == IPPROTO_TCP) ? cfg->tcp_tmo_interval : cfg->udp_tmo_interval;
-+ nat_write_hash_entry(hash_index, hash_entry);
-+ // nat_printf("%lu Validate a LAN hash entry %d\n", jiffies/HZ, hash_index);
-+ // hash_dump_entry(hash_index);
-+ hash_nat_enable_owner(hash_index);
-+ hash_validate_entry(hash_index); // Must last one, else HW Tx fast than SW
-+ nat_ip_conntrack->lan2wan_hash_index = hash_index + 1;
-+ nat_ip_conntrack->hw_nat |= 1;
-+ return 0;
-+ }
-+ else // WAN-to-LAN
-+ {
-+ if (nat_ip_conntrack->wan2lan_hash_index || nat_ip_conntrack->wan2lan_collision)
-+ return 0;
-+
-+ // Note: unused fields (including rule_id) MUST be zero
-+ hash_entry->key.Ethertype = 0;
-+ hash_entry->key.port_id = cfg->wan_port;
-+ hash_entry->key.rule_id = 0;
-+ hash_entry->key.ip_protocol = proto;
-+ hash_entry->key.reserved1 = 0;
-+ hash_entry->key.reserved2 = 0;
-+ hash_entry->key.sip = ntohl(nat_cb->sip);
-+ hash_entry->key.dip = ntohl(nat_cb->dip);
-+ hash_entry->key.sport = nat_cb->sport;
-+ hash_entry->key.dport = nat_cb->dport;
-+
-+ hash_index = nat_build_keys(&hash_entry->key);
-+
-+#ifdef NAT_DEBUG_WAN_HASH_TIMEOUT
-+ if (hash_get_nat_owner_flag(hash_index))
-+ return 0;
-+#endif
-+ if (hash_get_valid_flag(hash_index))
-+ {
-+ nat_ip_conntrack->wan2lan_collision = 1;
-+ nat_collision++;
-+#if 0
-+ if (proto == IPPROTO_TCP && (tcp_flag_word(tcp_hdr) & (TCP_FLAG_FIN | TCP_FLAG_RST)))
-+ {
-+ if (memcmp((void *)&hash_entry->key, hash_get_entry(hash_index), sizeof(NAT_KEY_T)) == 0)
-+ {
-+ hash_nat_disable_owner(hash_index);
-+ hash_invalidate_entry(hash_index); // Must last one, else HW Tx fast SW
-+ // nat_printf("Invalidate nat hash entry %d\n", hash_index);
-+ }
-+ }
-+#endif
-+ return 0;
-+ }
-+
-+ // write hash entry
-+ hash_entry->key.rule_id = cfg->tcp_udp_rule_id;
-+ memcpy(hash_entry->param.da, skb->data, 6);
-+ memcpy(hash_entry->param.sa, skb->data+6, 6);
-+ hash_entry->param.Sip = sip;
-+ hash_entry->param.Dip = dip;
-+ hash_entry->param.Sport = sport;
-+ hash_entry->param.Dport = dport;
-+ hash_entry->param.vlan = 0;
-+ hash_entry->param.pppoe = 0;
-+ hash_entry->param.sw_id = 0;
-+ hash_entry->param.mtu = 0;
-+ hash_entry->action.dword = (nat_cb->pppoe_frame) ? NAT_PPPOE_WAN2LAN_ACTIONS : NAT_WAN2LAN_ACTIONS;
-+ hash_entry->action.bits.dest_qid = sl351x_nat_assign_qid(proto, sip, dip, sport, dport);
-+ hash_entry->action.bits.dest_qid += (cfg->lan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;;
-+ hash_entry->tmo.counter = hash_entry->tmo.interval =
-+ (proto == IPPROTO_TCP) ? cfg->tcp_tmo_interval : cfg->udp_tmo_interval;
-+ nat_write_hash_entry(hash_index, hash_entry);
-+
-+ // nat_printf("%lu Validate a WAN hash entry %d\n", jiffies/HZ, hash_index);
-+ // hash_dump_entry(hash_index);
-+ hash_nat_enable_owner(hash_index);
-+ hash_validate_entry(hash_index); // Must last one, else HW Tx fast SW
-+ nat_ip_conntrack->wan2lan_hash_index = hash_index + 1;
-+ nat_ip_conntrack->hw_nat |= 2;
-+ return 0;
-+ }
-+ return 0;
-+}
-+
-+/*----------------------------------------------------------------------
-+* sl351x_nat_gre_output
-+* Handle NAT GRE output frames
-+*----------------------------------------------------------------------*/
-+int sl351x_nat_gre_output(struct sk_buff *skb, int port)
-+{
-+ u32 sip, dip;
-+ struct ethhdr *ether_hdr;
-+ struct iphdr *ip_hdr;
-+ struct pppoe_hdr *pppoe_hdr;
-+ GRE_PKTHDR_T *gre_hdr;
-+ NAT_CB_T *nat_cb;
-+ NAT_CFG_T *cfg;
-+ u16 ppp_proto;
-+ u32 hash_data[HASH_MAX_DWORDS];
-+ GRE_HASH_ENTRY_T *hash_entry;
-+ int hash_index;
-+ struct ip_conntrack *nat_ip_conntrack;
-+ enum ip_conntrack_info ctinfo;
-+
-+ nat_cb = NAT_SKB_CB(skb);
-+ cfg = (NAT_CFG_T *)&nat_cfg;
-+
-+ ether_hdr = (struct ethhdr *)skb->data;
-+ ip_hdr = (struct iphdr *)skb->h.ipiph;
-+ gre_hdr = (GRE_PKTHDR_T *)((u32)ip_hdr + (ip_hdr->ihl<<2));
-+ sip = ntohl(ip_hdr->saddr);
-+ dip = ntohl(ip_hdr->daddr);
-+
-+#ifdef NAT_DEBUG_MSG
-+ {
-+ nat_printf("To GMAC-%d: 0x%-4X GRE %d.%d.%d.%d [%d] --> %d.%d.%d.%d",
-+ port, ntohs(ip_hdr->id),
-+ NIPQUAD(ip_hdr->saddr), ntohs(gre_hdr->call_id),
-+ NIPQUAD(ip_hdr->daddr));
-+ nat_printf("\n");
-+ }
-+#endif
-+ nat_ip_conntrack = ip_conntrack_get(skb, &ctinfo);
-+ if (nat_ip_conntrack)
-+ {
-+ // if (nat_ip_conntrack->master || nat_ip_conntrack->helper)
-+ if (nat_ip_conntrack->helper)
-+ {
-+ nat_printf("GRE Call-ID=%d, master=0x%x, helper=0x%x\n", ntohs(gre_hdr->call_id), (u32)nat_ip_conntrack->master, (u32)nat_ip_conntrack->helper);
-+ return 0;
-+ }
-+ if (!(nat_ip_conntrack->status & IPS_ASSURED))
-+ return 0;
-+ }
-+
-+ hash_entry = (GRE_HASH_ENTRY_T *)&hash_data;
-+ if (port == cfg->wan_port) // LAN-to-WAN
-+ {
-+#ifdef _NOT_CHECK_SIP_DIP // enable it if know and get the wan ip address
-+ if (!sl351x_nat_find_ipcfg(sip, port))
-+ {
-+ printk("LAN->WAN Incorrect Sip %d.%d.%d.%d\n", HIPQUAD(sip));
-+ return 0;
-+ }
-+#endif
-+ // Note: unused fields (including rule_id) MUST be zero
-+ hash_entry->key.Ethertype = 0;
-+ hash_entry->key.port_id = cfg->lan_port;
-+ hash_entry->key.rule_id = 0;
-+ hash_entry->key.ip_protocol = IPPROTO_GRE;
-+ hash_entry->key.reserved1 = 0;
-+ hash_entry->key.reserved2 = 0;
-+ hash_entry->key.reserved3 = 0;
-+ hash_entry->key.reserved4 = 0;
-+ hash_entry->key.sip = ntohl(nat_cb->sip);
-+ hash_entry->key.dip = ntohl(nat_cb->dip);
-+ hash_entry->key.protocol = nat_cb->sport;
-+ hash_entry->key.call_id = nat_cb->dport;
-+
-+ hash_index = gre_build_keys(&hash_entry->key);
-+
-+#ifdef NAT_DEBUG_LAN_HASH_TIMEOUT
-+ if (hash_get_nat_owner_flag(hash_index))
-+ return 0;
-+#endif
-+ if (hash_get_valid_flag(hash_index))
-+ {
-+ return 0;
-+ }
-+
-+ // write hash entry
-+ hash_entry->key.rule_id = cfg->gre_rule_id;
-+ memcpy(hash_entry->param.da, skb->data, 6);
-+ memcpy(hash_entry->param.sa, skb->data+6, 6);
-+ hash_entry->param.Sip = sip;
-+ hash_entry->param.Dip = dip;
-+ hash_entry->param.Sport = 0;
-+ hash_entry->param.Dport = ntohs(gre_hdr->call_id);
-+ hash_entry->param.vlan = 0;
-+ hash_entry->param.sw_id = 0;
-+ hash_entry->param.mtu = 0;
-+ // check PPPoE
-+ pppoe_hdr = (struct pppoe_hdr *)(ether_hdr + 1);
-+ ppp_proto = *(u16 *)&pppoe_hdr->tag[0];
-+ if (ether_hdr->h_proto == __constant_htons(ETH_P_PPP_SES) // 0x8864
-+ && ppp_proto == __constant_htons(PPP_IP) ) // 0x21
-+ {
-+ hash_entry->action.dword = NAT_PPPOE_PPTP_LAN2WAN_ACTIONS;
-+ hash_entry->param.pppoe = htons(pppoe_hdr->sid);
-+ }
-+ else
-+ {
-+ hash_entry->action.dword = NAT_PPTP_LAN2WAN_ACTIONS;
-+ hash_entry->param.pppoe = 0;
-+ }
-+ hash_entry->action.bits.dest_qid = sl351x_nat_assign_qid(IPPROTO_GRE, sip, dip, 0, ntohs(gre_hdr->call_id));
-+ hash_entry->action.bits.dest_qid += (cfg->wan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;
-+ hash_entry->tmo.counter = hash_entry->tmo.interval = cfg->gre_tmo_interval;
-+ gre_write_hash_entry(hash_index, hash_entry);
-+ // nat_printf("%lu Validate a LAN hash entry %d\n", jiffies/HZ, hash_index);
-+ // hash_dump_entry(hash_index);
-+ hash_nat_enable_owner(hash_index);
-+ hash_validate_entry(hash_index); // Must last one, else HW Tx fast than SW
-+ return 0;
-+ }
-+ else // WAN-to-LAN
-+ {
-+ // Note: unused fields (including rule_id) MUST be zero
-+ hash_entry->key.Ethertype = 0;
-+ hash_entry->key.port_id = cfg->wan_port;
-+ hash_entry->key.rule_id = 0;
-+ hash_entry->key.ip_protocol = IPPROTO_GRE;
-+ hash_entry->key.reserved1 = 0;
-+ hash_entry->key.reserved2 = 0;
-+ hash_entry->key.reserved3 = 0;
-+ hash_entry->key.reserved4 = 0;
-+ hash_entry->key.sip = ntohl(nat_cb->sip);
-+ hash_entry->key.dip = ntohl(nat_cb->dip);
-+ hash_entry->key.protocol = nat_cb->sport;
-+ hash_entry->key.call_id = nat_cb->dport;
-+
-+ hash_index = gre_build_keys(&hash_entry->key);
-+
-+#ifdef NAT_DEBUG_WAN_HASH_TIMEOUT
-+ if (hash_get_nat_owner_flag(hash_index))
-+ return 0;
-+#endif
-+ if (hash_get_valid_flag(hash_index))
-+ {
-+ return 0;
-+ }
-+
-+ // write hash entry
-+ hash_entry->key.rule_id = cfg->gre_rule_id;
-+ memcpy(hash_entry->param.da, skb->data, 6);
-+ memcpy(hash_entry->param.sa, skb->data+6, 6);
-+ hash_entry->param.Sip = sip;
-+ hash_entry->param.Dip = dip;
-+ hash_entry->param.Sport = 0;
-+ hash_entry->param.Dport = ntohs(gre_hdr->call_id);
-+ hash_entry->param.vlan = 0;
-+ hash_entry->param.pppoe = 0;
-+ hash_entry->param.sw_id = 0;
-+ hash_entry->param.mtu = 0;
-+ hash_entry->action.dword = (nat_cb->pppoe_frame) ? NAT_PPPOE_PPTP_WAN2LAN_ACTIONS : NAT_PPTP_WAN2LAN_ACTIONS;
-+ hash_entry->action.bits.dest_qid = sl351x_nat_assign_qid(IPPROTO_GRE, sip, dip, 0, ntohs(gre_hdr->call_id));
-+ hash_entry->action.bits.dest_qid += (cfg->lan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;;
-+ hash_entry->tmo.counter = hash_entry->tmo.interval = cfg->gre_tmo_interval;
-+ gre_write_hash_entry(hash_index, hash_entry);
-+
-+ // nat_printf("%lu Validate a WAN hash entry %d\n", jiffies/HZ, hash_index);
-+ // hash_dump_entry(hash_index);
-+ hash_nat_enable_owner(hash_index);
-+ hash_validate_entry(hash_index); // Must last one, else HW Tx fast SW
-+ return 0;
-+ }
-+ return 0;
-+}
-+
-+
-+#ifdef _HAVE_DYNAMIC_PORT_LIST
-+/*----------------------------------------------------------------------
-+* sl_nat_add_port
-+*----------------------------------------------------------------------*/
-+void sl_nat_add_port(u8 protocol, u16 port)
-+{
-+ int i;
-+ u16 *port_ptr;
-+
-+ if (protocol == IPPROTO_TCP)
-+ port_ptr = dynamic_tcp_port_list;
-+ else if (protocol == IPPROTO_UDP)
-+ port_ptr = dynamic_udp_port_list;
-+ else
-+ return;
-+
-+ for (i=0; *port_ptr; i++)
-+ {
-+ if (port == *port_ptr)
-+ return;
-+ port_ptr++;
-+ }
-+ port_ptr++;
-+ *port_ptr = port;
-+}
-+
-+/*----------------------------------------------------------------------
-+* sl_nat_remove_port
-+*----------------------------------------------------------------------*/
-+void sl_nat_remove_port(u8 protocol, u16 port)
-+{
-+ int i, j;
-+ u16 *port_ptr, *next;
-+
-+ if (protocol == IPPROTO_TCP)
-+ port_ptr = dynamic_tcp_port_list;
-+ else if (protocol == IPPROTO_UDP)
-+ port_ptr = dynamic_udp_port_list;
-+ else
-+ return;
-+
-+ for (i=0; *port_ptr; i++, port_ptr++)
-+ {
-+ if (port == *port_ptr)
-+ {
-+ port_next = port_ptr + 1;
-+ for (j=i+1; *port_next; i++, j++)
-+ *port_ptr++ = *port_next++;
-+ *port_ptr = 0;
-+ return;
-+ }
-+ }
-+}
-+#endif
-+
-+/*----------------------------------------------------------------------
-+* sl351x_nat_ioctl
-+*----------------------------------------------------------------------*/
-+int sl351x_nat_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-+{
-+ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
-+ int i, j, port_id;
-+ NATCMD_HDR_T nat_hdr;
-+ NAT_REQ_E ctrl;
-+ unsigned char *req_datap;
-+ NAT_IP_ENTRY_T *ipcfg;
-+ NAT_XPORT_ENTRY_T *xport_entry;
-+ NAT_WRULE_ENTRY_T *wrule_entry;
-+ unsigned int qid;
-+
-+ if (copy_from_user((void *)&nat_hdr, rq->ifr_data, sizeof(nat_hdr)))
-+ return -EFAULT;
-+ req_datap = (unsigned char *)rq->ifr_data + sizeof(nat_hdr);
-+ port_id = tp->port_id;
-+ switch (nat_hdr.cmd) {
-+ case NATSSTATUS:
-+ if (!capable(CAP_NET_ADMIN))
-+ return -EPERM;
-+ if (nat_hdr.len != sizeof(NAT_STATUS_T))
-+ return -EPERM;
-+ if (copy_from_user((void *)&ctrl.status, req_datap, sizeof(ctrl.status)))
-+ return -EFAULT;
-+ if (ctrl.status.enable != 0 && ctrl.status.enable != 1)
-+ return -EPERM;
-+ // sl351x_nat_set_enabled_flag(ctrl.status.enable);
-+ if (nat_cfg.enabled && (ctrl.status.enable == 0))
-+ {
-+ for (i=0; i<HASH_TOTAL_ENTRIES; i++)
-+ {
-+ if (hash_get_nat_owner_flag(i))
-+ {
-+ hash_nat_disable_owner(i);
-+ hash_invalidate_entry(i);
-+ }
-+ }
-+ }
-+ nat_cfg.enabled = ctrl.status.enable;
-+ break;
-+ case NATGSTATUS:
-+ if (nat_hdr.len != sizeof(NAT_STATUS_T))
-+ return -EPERM;
-+ ctrl.status.enable = nat_cfg.enabled;
-+ if (copy_to_user(req_datap, (void *)&ctrl.status, sizeof(ctrl.status)))
-+ return -EFAULT;
-+ break;
-+ case NATSETPORT:
-+ if (!capable(CAP_NET_ADMIN))
-+ return -EPERM;
-+ if (nat_hdr.len != sizeof(NAT_PORTCFG_T))
-+ return -EPERM;
-+ if (copy_from_user((void *)&ctrl.portcfg, req_datap, sizeof(ctrl.portcfg)))
-+ return -EFAULT;
-+ if (ctrl.portcfg.portmap == 0)
-+ nat_cfg.lan_port = port_id;
-+ else if (ctrl.portcfg.portmap == 1)
-+ nat_cfg.wan_port = port_id;
-+ else
-+ return -EPERM;
-+ break;
-+ case NATGETPORT:
-+ if (nat_hdr.len != sizeof(NAT_PORTCFG_T))
-+ return -EPERM;
-+ if (nat_cfg.lan_port == port_id)
-+ ctrl.portcfg.portmap = 0;
-+ else if (nat_cfg.wan_port == port_id)
-+ ctrl.portcfg.portmap = 1;
-+ else
-+ return -EPERM;
-+ if (copy_to_user(req_datap, (void *)&ctrl.portcfg, sizeof(ctrl.portcfg)))
-+ return -EFAULT;
-+ break;
-+ case NATADDIP:
-+ if (!capable(CAP_NET_ADMIN))
-+ return -EPERM;
-+ if (nat_hdr.len != sizeof(NAT_IPCFG_T))
-+ return -EPERM;
-+ i = nat_cfg.ipcfg[port_id].total;
-+ if (i >= CONFIG_NAT_MAX_IP_NUM)
-+ return -E2BIG;
-+ if (copy_from_user((void *)&nat_cfg.ipcfg[port_id].entry[i], req_datap, sizeof(NAT_IPCFG_T)))
-+ return -EFAULT;
-+ nat_cfg.ipcfg[port_id].total++;
-+ break;
-+ case NATDELIP:
-+ if (!capable(CAP_NET_ADMIN))
-+ return -EPERM;
-+ if (nat_hdr.len != sizeof(NAT_IPCFG_T))
-+ return -EPERM;
-+ if (copy_from_user((void *)&ctrl.ipcfg, req_datap, sizeof(ctrl.ipcfg)))
-+ return -EFAULT;
-+ ipcfg = (NAT_IP_ENTRY_T *)&nat_cfg.ipcfg[port_id].entry[0];
-+ for (i=0; i<nat_cfg.ipcfg[port_id].total; i++, ipcfg++)
-+ {
-+ if (ipcfg->ipaddr == ctrl.ipcfg.entry.ipaddr)
-+ {
-+ NAT_IP_ENTRY_T *ipcfg_next;
-+ ipcfg_next = ipcfg + 1;
-+ for (j=i+1; j < nat_cfg.ipcfg[port_id].total; i++, j++)
-+ {
-+ memcpy((void *)ipcfg, (void *)ipcfg_next, sizeof(NAT_IP_ENTRY_T));
-+ ipcfg++;
-+ ipcfg_next++;
-+ }
-+ ipcfg->ipaddr = 0;
-+ ipcfg->netmask = 0;
-+ nat_cfg.ipcfg[port_id].total--;
-+ return 0;
-+ }
-+ }
-+ return -ENOENT;
-+ case NATGETIP:
-+ if (nat_hdr.len != sizeof(NAT_IPCFG_ALL_T))
-+ return -EPERM;
-+ if (copy_to_user(req_datap, (void *)&nat_cfg.ipcfg[port_id], sizeof(NAT_IPCFG_ALL_T)))
-+ return -EFAULT;
-+ break;
-+ case NATAXPORT:
-+ if (!capable(CAP_NET_ADMIN))
-+ return -EPERM;
-+ if (nat_hdr.len != sizeof(NAT_XPORT_T))
-+ return -EPERM;
-+ i = nat_cfg.xport.total;
-+ if (i >= CONFIG_NAT_MAX_XPORT)
-+ return -E2BIG;
-+ if (copy_from_user((void *)&nat_cfg.xport.entry[i], req_datap, sizeof(NAT_XPORT_T)))
-+ return -EFAULT;
-+ nat_cfg.xport.total++;
-+ break;
-+ case NATDXPORT:
-+ if (!capable(CAP_NET_ADMIN))
-+ return -EPERM;
-+ if (nat_hdr.len != sizeof(NAT_XPORT_T))
-+ return -EPERM;
-+ if (copy_from_user((void *)&ctrl.xport, req_datap, sizeof(NAT_XPORT_T)))
-+ return -EFAULT;
-+ xport_entry = (NAT_XPORT_ENTRY_T *)&nat_cfg.xport.entry[0];
-+ for (i=0; i<nat_cfg.xport.total; i++, xport_entry++)
-+ {
-+ if (memcmp((void *)xport_entry, (void *)&ctrl.xport, sizeof(NAT_XPORT_ENTRY_T)) == 0)
-+ {
-+ NAT_XPORT_ENTRY_T *xport_next;
-+ xport_next = xport_entry + 1;
-+ for (j=i+1; j < nat_cfg.xport.total; i++, j++)
-+ {
-+ memcpy((void *)xport_entry, (void *)xport_next, sizeof(NAT_XPORT_ENTRY_T));
-+ xport_entry++;
-+ xport_next++;
-+ }
-+ memset((void *)xport_entry, 0, sizeof(NAT_XPORT_ENTRY_T));
-+ nat_cfg.xport.total--;
-+ return 0;
-+ }
-+ }
-+ return -ENOENT;
-+ case NATGXPORT:
-+ if (nat_hdr.len != sizeof(NAT_XPORT_ALL_T))
-+ return -EPERM;
-+ if (copy_to_user(req_datap, (void *)&nat_cfg.xport, sizeof(NAT_XPORT_ALL_T)))
-+ return -EFAULT;
-+ break;
-+ case NATSWEIGHT:
-+ if (!capable(CAP_NET_ADMIN))
-+ return -EPERM;
-+ if (nat_hdr.len != sizeof(NAT_WEIGHT_T))
-+ return -EPERM;
-+ if (copy_from_user((void *)&nat_cfg.weight, req_datap, sizeof(NAT_WEIGHT_T)))
-+ return -EFAULT;
-+ mac_set_hw_tx_weight(dev, (char *)&nat_cfg.weight);
-+ break;
-+ case NATGWEIGHT:
-+ if (nat_hdr.len != sizeof(NAT_WEIGHT_T))
-+ return -EPERM;
-+ mac_get_hw_tx_weight(dev, (char *)&nat_cfg.weight);
-+ if (copy_to_user(req_datap, (void *)&nat_cfg.weight, sizeof(NAT_WEIGHT_T)))
-+ return -EFAULT;
-+ break;
-+ case NATAWRULE:
-+ if (!capable(CAP_NET_ADMIN))
-+ return -EPERM;
-+ if (nat_hdr.len != sizeof(NAT_WRULE_T))
-+ return -EPERM;
-+ if (copy_from_user((void *)&qid, req_datap, sizeof(qid)))
-+ return -EFAULT;
-+ if (qid > CONFIG_NAT_TXQ_NUM)
-+ return -EPERM;
-+ i = nat_cfg.wrule[qid].total;
-+ if (i >= CONFIG_NAT_MAX_WRULE)
-+ return -E2BIG;
-+ if (copy_from_user((void *)&nat_cfg.wrule[qid].entry[i], req_datap+sizeof(qid), sizeof(NAT_WRULE_T)))
-+ return -EFAULT;
-+ nat_cfg.wrule[qid].total++;
-+ break;
-+ case NATDWRULE:
-+ if (!capable(CAP_NET_ADMIN))
-+ return -EPERM;
-+ if (nat_hdr.len != sizeof(NAT_WRULE_T))
-+ return -EPERM;
-+ if (copy_from_user((void *)&ctrl.wrule, req_datap, sizeof(NAT_WRULE_T)))
-+ return -EFAULT;
-+ qid = ctrl.wrule.qid;
-+ if (qid >= CONFIG_NAT_TXQ_NUM)
-+ return -EPERM;
-+ wrule_entry = (NAT_WRULE_ENTRY_T *)&nat_cfg.wrule[qid].entry[0];
-+ for (i=0; i<nat_cfg.wrule[qid].total; i++, wrule_entry++)
-+ {
-+ if (memcmp((void *)wrule_entry, (void *)&ctrl.wrule.entry, sizeof(NAT_WRULE_ENTRY_T)) == 0)
-+ {
-+ NAT_WRULE_ENTRY_T *wrule_next;
-+ wrule_next = wrule_entry + 1;
-+ for (j=i+1; j < nat_cfg.wrule[qid].total; i++, j++)
-+ {
-+ memcpy((void *)wrule_entry, (void *)wrule_next, sizeof(NAT_WRULE_ENTRY_T));
-+ wrule_entry++;
-+ wrule_next++;
-+ }
-+ memset((void *)wrule_entry, 0, sizeof(NAT_WRULE_ENTRY_T));
-+ nat_cfg.wrule[qid].total--;
-+ return 0;
-+ }
-+ }
-+ return -ENOENT;
-+ case NATGWRULE:
-+ if (nat_hdr.len != sizeof(NAT_WRULE_ALL_T))
-+ return -EPERM;
-+ if (copy_from_user((void *)&qid, req_datap, sizeof(qid)))
-+ return -EFAULT;
-+ if (qid >= CONFIG_NAT_TXQ_NUM)
-+ return -EPERM;
-+ if (copy_to_user(req_datap, (void *)&nat_cfg.wrule[qid], sizeof(NAT_WRULE_ALL_T)))
-+ return -EFAULT;
-+ break;
-+ case NATSDEFQ:
-+ if (!capable(CAP_NET_ADMIN))
-+ return -EPERM;
-+ if (nat_hdr.len != sizeof(NAT_QUEUE_T))
-+ return -EPERM;
-+ if (copy_from_user((void *)&nat_cfg.default_hw_txq, req_datap, sizeof(u32)))
-+ return -EFAULT;
-+ break;
-+ case NATGDEFQ:
-+ if (nat_hdr.len != sizeof(NAT_QUEUE_T))
-+ return -EPERM;
-+ if (copy_to_user(req_datap, (void *)&nat_cfg.default_hw_txq, sizeof(u32)))
-+ return -EFAULT;
-+ case NATRMIPCFG:
-+ nat_cfg.ipcfg[port_id].total = 0;
-+ break;
-+ case NATTESTENTRY:
-+ if (!capable(CAP_NET_ADMIN))
-+ return -EPERM;
-+ if (nat_hdr.len != sizeof(NAT_TESTENTRY_T))
-+ return -EPERM;
-+ if (copy_from_user((void *)&ctrl.init_entry, req_datap, sizeof(ctrl.init_entry)))
-+ return -EFAULT;
-+ if (ctrl.init_entry.init_enable != 0 && ctrl.init_entry.init_enable != 1)
-+ return -EPERM;
-+ nat_cfg.init_enabled = ctrl.init_entry.init_enable;
-+ break;
-+
-+ default:
-+ return -EPERM;
-+ }
-+
-+ return 0;
-+}
-+
-+/*----------------------------------------------------------------------
-+* nat_init_test_entry
-+* Initialize NAT test hash entries
-+*
-+* SmartBits P1 -----> Lepus GMAC 0 --------------+
-+* |
-+* |
-+* P3 <----- Lepus GMAC 1 -- HW TxQ0 <--+
-+* -- HW TxQ1 <--+
-+* -- HW TxQ2 <--+
-+* -- HW TxQ3 <--+
-+*
-+* SmartBits P1 <----- Lepus GMAC 0 -- HW TxQ0 <--+
-+* -- HW TxQ1 <--+
-+* -- HW TxQ2 <--+
-+* -- HW TxQ3 <--+
-+* |
-+* |
-+* P3 -----> Lepus GMAC 1 --------------+
-+*
-+* LAN GMAC0 <--------------------------------------------> GMAC1 WAN
-+* 192.168.[x].[y]:50 --> 168.95.[x].[y]:80 ---TXQ[y-1]---> 192.168.2.254:200[y] --> 168.95.[x].[y]:80
-+* 192.168.[x].[y]:50 <-- 168.95.[x].[y]:80 <--TXQ[y-1]---- 192.168.2.254:200[y] <-- 168.95.[x].[y]:80
-+* where:
-+* [x] : Packet Type
-+* [y] : Tx Queue, 1 for TxQ0, 2 for TxQ1, 3 for TxQ2, 4 for TxQ3,
-+*
-+*
-+* Packet Type:
-+* 1. TCP Frames <---> TCP Frames
-+* LAN GMAC0 <--------------------------------> GMAC1 WAN
-+* 192.168.1.1:50 --> 168.95.1.1:80 ---TXQ0---> 192.168.2.254:2001 --> 168.95.1.1:80
-+* 192.168.1.1:50 <-- 168.95.1.1:80 <--TXQ0---- 192.168.2.254:2001 <-- 168.95.1.1:80
-+*
-+* 192.168.1.2:50 --> 168.95.1.2:80 ---TXQ1---> 192.168.2.254:2002 --> 168.95.1.2:80
-+* 192.168.1.2:50 <-- 168.95.1.2:80 <--TXQ1---- 192.168.2.254:2002 <-- 168.95.1.2:80
-+*
-+* 192.168.1.3:50 --> 168.95.1.3:80 ---TXQ2---> 192.168.2.254:2003 --> 168.95.1.3:80
-+* 192.168.1.3:50 <-- 168.95.1.3:80 <--TXQ2---- 192.168.2.254:2003 <-- 168.95.1.3:80
-+*
-+* 192.168.1.4:50 --> 168.95.1.4:80 ---TXQ3---> 192.168.2.254:2004 --> 168.95.1.4:80
-+* 192.168.1.4:50 <-- 168.95.1.4:80 <--TXQ3---- 192.168.2.254:2004 <-- 168.95.1.4:80
-+*
-+* 2 TCP Frames <----> PPPoE + TCP Frames
-+* LAN GMAC0 <--------------------------------> GMAC1 WAN
-+* 192.168.2.1:50 --> 168.95.2.1:80 ---TXQ0---> 192.168.2.254:2001 --> 168.95.2.1:80
-+* 192.168.2.1:50 <-- 168.95.2.1:80 <--TXQ0---- 192.168.2.254:2001 <-- 168.95.2.1:80
-+*
-+* 192.168.2.2:50 --> 168.95.2.2:80 ---TXQ1---> 192.168.2.254:2002 --> 168.95.2.2:80
-+* 192.168.2.2:50 <-- 168.95.2.2:80 <--TXQ1---- 192.168.2.254:2002 <-- 168.95.2.2:80
-+*
-+* 192.168.2.3:50 --> 168.95.2.3:80 ---TXQ2---> 192.168.2.254:2003 --> 168.95.2.3:80
-+* 192.168.2.3:50 <-- 168.95.2.3:80 <--TXQ2---- 192.168.2.254:2003 <-- 168.95.2.3:80
-+*
-+* 192.168.2.4:50 --> 168.95.2.4:80 ---TXQ3---> 192.168.2.254:2004 --> 168.95.2.4:80
-+* 192.168.2.4:50 <-- 168.95.2.4:80 <--TXQ3---- 192.168.2.254:2004 <-- 168.95.2.4:80
-+*
-+* 3 TCP Frames <----> VLAN + PPPoE + TCP Frames
-+* LAN GMAC0 <--------------------------------> GMAC1 WAN
-+* 192.168.3.1:50 --> 168.95.3.1:80 ---TXQ0---> 192.168.2.254:2001 --> 168.95.3.1:80
-+* 192.168.3.1:50 <-- 168.95.3.1:80 <--TXQ0---- 192.168.2.254:2001 <-- 168.95.3.1:80
-+*
-+* 192.168.3.2:50 --> 168.95.3.2:80 ---TXQ1---> 192.168.2.254:2002 --> 168.95.3.2:80
-+* 192.168.3.2:50 <-- 168.95.3.2:80 <--TXQ1---- 192.168.2.254:2002 <-- 168.95.3.2:80
-+*
-+* 192.168.3.3:50 --> 168.95.3.3:80 ---TXQ2---> 192.168.2.254:2003 --> 168.95.3.3:80
-+* 192.168.3.3:50 <-- 168.95.3.3:80 <--TXQ2---- 192.168.2.254:2003 <-- 168.95.3.3:80
-+*
-+* 192.168.3.4:50 --> 168.95.3.4:80 ---TXQ3---> 192.168.2.254:2004 --> 168.95.3.4:80
-+* 192.168.3.4:50 <-- 168.95.3.4:80 <--TXQ3---- 192.168.2.254:2004 <-- 168.95.3.4:80
-+*
-+* 4 VLAN-A + TCP Frames <----> VLAN-B + PPPoE + TCP Frames
-+* LAN GMAC0 <--------------------------------> GMAC1 WAN
-+* 192.168.4.1:50 --> 168.95.4.1:80 ---TXQ0---> 192.168.2.254:2001 --> 168.95.4.1:80
-+* 192.168.4.1:50 <-- 168.95.4.1:80 <--TXQ0---- 192.168.2.254:2001 <-- 168.95.4.1:80
-+*
-+* 192.168.4.2:50 --> 168.95.4.2:80 ---TXQ1---> 192.168.2.254:2002 --> 168.95.4.2:80
-+* 192.168.4.2:50 <-- 168.95.4.2:80 <--TXQ1---- 192.168.2.254:2002 <-- 168.95.4.2:80
-+*
-+* 192.168.4.3:50 --> 168.95.4.3:80 ---TXQ2---> 192.168.2.254:2003 --> 168.95.4.3:80
-+* 192.168.4.3:50 <-- 168.95.4.3:80 <--TXQ2---- 192.168.2.254:2003 <-- 168.95.4.3:80
-+*
-+* 192.168.4.4:50 --> 168.95.4.4:80 ---TXQ3---> 192.168.2.254:2004 --> 168.95.4.4:80
-+* 192.168.4.4:50 <-- 168.95.4.4:80 <--TXQ3---- 192.168.2.254:2004 <-- 168.95.4.4:80
-+*
-+*
-+*
-+*----------------------------------------------------------------------*/
-+#ifdef SL351x_NAT_TEST_BY_SMARTBITS
-+#define NAT_IPIV(a,b,c,d) ((a<<24)+(b<<16)+(c<<8)+d)
-+#define NAT_TEST_CLIENT_IP NAT_IPIV(192,168,1,1)
-+#define NAT_TEST_SERVER_IP NAT_IPIV(168,95,1,1)
-+#define NAT_TEST_LAN_IP NAT_IPIV(192,168,1,254)
-+#define NAT_TEST_WAN_IP NAT_IPIV(192,168,2,254)
-+#define NAT_TEST_MAP_PORT_BASE 2001
-+#define NAT_TEST_SPORT 50
-+#define NAT_TEST_DPORT 80
-+#define NAT_TEST_PROTOCOL 6
-+u8 nat_test_lan_target_da[6]={0x00,0x11,0x22,0x33,0x44,0x55};
-+u8 nat_test_wan_target_da[6]={0x00,0xaa,0xbb,0xcc,0xdd,0xee};
-+u8 nat_test_lan_my_da[6]={0x00,0x11,0x11,0x11,0x11,0x11};
-+u8 nat_test_wan_my_da[6]={0x00,0x22,0x22,0x22,0x22,0x22};
-+static void nat_init_test_entry(void)
-+{
-+ int i, j ;
-+ NAT_HASH_ENTRY_T *hash_entry;
-+ u32 sip, dip;
-+ u32 hash_data[HASH_MAX_DWORDS];
-+ NAT_CFG_T *cfg;
-+ int hash_index;
-+
-+ cfg = (NAT_CFG_T *)&nat_cfg;
-+ hash_entry = (NAT_HASH_ENTRY_T *)&hash_data;
-+ hash_entry->key.Ethertype = 0;
-+ hash_entry->key.rule_id = 0;
-+ hash_entry->key.ip_protocol = IPPROTO_TCP;
-+ hash_entry->key.reserved1 = 0;
-+ hash_entry->key.reserved2 = 0;
-+ // hash_entry->key.sip = NAT_TEST_CLIENT_IP;
-+ // hash_entry->key.dip = NAT_TEST_SERVER_IP;
-+ hash_entry->key.sport = htons(NAT_TEST_SPORT);
-+ hash_entry->key.dport = htons(NAT_TEST_DPORT);
-+ hash_entry->key.rule_id = cfg->tcp_udp_rule_id;
-+ hash_entry->action.dword = NAT_LAN2WAN_ACTIONS;
-+
-+ sip = NAT_TEST_CLIENT_IP;
-+ dip = NAT_TEST_SERVER_IP;
-+
-+ // Init TCP <------> TCP hash entries
-+ // LAN --> WAN
-+ // (1) TCP --> TCP
-+ // (2) TCP --> PPPoE + TCP
-+ // (3) TCP --> VLAN-B + PPPoE + TCP
-+ // (4) TCP + VLAN-A --> VLAN-B + PPPoE + TCP
-+ memcpy(hash_entry->param.da, nat_test_wan_target_da, 6);
-+ memcpy(hash_entry->param.sa, nat_test_wan_my_da, 6);
-+ hash_entry->key.port_id = cfg->lan_port;
-+ for (i=0; i<TOE_HW_TXQ_NUM; i++)
-+ {
-+ if (i < 2)
-+ {
-+ hash_entry->action.bits.dest_qid = i+2;
-+ }
-+ else
-+ {
-+ hash_entry->action.bits.dest_qid = i;
-+ }
-+ hash_entry->action.bits.dest_qid += (cfg->wan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;
-+ hash_entry->param.Sport = NAT_TEST_MAP_PORT_BASE+i;
-+ hash_entry->param.Dport = NAT_TEST_DPORT;
-+ for (j=0; j<4; j++)
-+ {
-+ hash_entry->key.sip = sip + i + j*0x100;
-+ hash_entry->key.dip = dip + i + j*0x100;
-+ hash_entry->param.Dip = hash_entry->key.dip;
-+ hash_entry->param.Sip = NAT_TEST_WAN_IP;
-+ switch (j)
-+ {
-+ case 0:
-+ hash_entry->action.bits.pppoe = 0;
-+ hash_entry->param.pppoe = 0;
-+ hash_entry->action.bits.vlan = 0;
-+ hash_entry->param.vlan = 0;
-+ break;
-+ case 1:
-+ hash_entry->action.bits.pppoe = 1;
-+ hash_entry->param.pppoe = i+1;
-+ hash_entry->action.bits.vlan = 0;
-+ hash_entry->param.vlan = 0;
-+ break;
-+ case 2:
-+ hash_entry->action.bits.pppoe = 1;
-+ hash_entry->param.pppoe = i+1;
-+ hash_entry->action.bits.vlan = 1;
-+ hash_entry->param.vlan = i+10;
-+ break;
-+ case 3:
-+ hash_entry->action.bits.pppoe = 1;
-+ hash_entry->param.pppoe = i+1;
-+ hash_entry->action.bits.vlan = 1;
-+ hash_entry->param.vlan = i+10;
-+ break;
-+ }
-+ hash_entry->tmo.counter = hash_entry->tmo.interval = 0x7fff;
-+ hash_index = nat_build_keys(&hash_entry->key);
-+ nat_write_hash_entry(hash_index, hash_entry);
-+ hash_nat_enable_owner(hash_index);
-+ hash_validate_entry(hash_index); // Must last one, else HW Tx fast than SW
-+ }
-+ }
-+
-+
-+ // WAN --> LAN
-+ hash_entry->key.port_id = cfg->wan_port;
-+ hash_entry->key.sport = htons(NAT_TEST_DPORT);
-+ hash_entry->key.dport = htons(NAT_TEST_DPORT);
-+ hash_entry->key.rule_id = cfg->tcp_udp_rule_id;
-+ hash_entry->action.dword = NAT_WAN2LAN_ACTIONS;
-+ hash_entry->key.sport = htons(NAT_TEST_DPORT);
-+ memcpy(hash_entry->param.da, nat_test_lan_target_da, 6);
-+ memcpy(hash_entry->param.sa, nat_test_lan_my_da, 6);
-+ for (i=0; i<TOE_HW_TXQ_NUM; i++)
-+ {
-+ hash_entry->key.dport = htons(NAT_TEST_MAP_PORT_BASE + i);
-+ if (i < 2)
-+ {
-+ hash_entry->action.bits.dest_qid = i+2;
-+ }
-+ else
-+ {
-+ hash_entry->action.bits.dest_qid = i;
-+ }
-+ hash_entry->action.bits.dest_qid += (cfg->lan_port==0) ? TOE_GMAC0_HW_TXQ0_QID : TOE_GMAC1_HW_TXQ0_QID;
-+ hash_entry->param.Dport = NAT_TEST_SPORT;
-+ hash_entry->param.Sport = NAT_TEST_DPORT;
-+ hash_entry->param.da[5] = i;
-+ for (j=0; j<4; j++)
-+ {
-+ hash_entry->key.sip = (dip + i + j*0x100);
-+ hash_entry->key.dip = (NAT_TEST_WAN_IP);
-+ hash_entry->param.Sip = hash_entry->key.sip;
-+ hash_entry->param.Dip = sip + i + j*0x100;
-+ switch (j)
-+ {
-+ case 0:
-+ hash_entry->action.bits.pppoe = 0;
-+ hash_entry->param.pppoe = 0;
-+ hash_entry->action.bits.vlan = 0;
-+ hash_entry->param.vlan = 0;
-+ break;
-+ case 1:
-+ hash_entry->action.bits.pppoe = 2;
-+ hash_entry->param.pppoe = i+1;
-+ hash_entry->action.bits.vlan = 0;
-+ hash_entry->param.vlan = 0;
-+ break;
-+ case 2:
-+ hash_entry->action.bits.pppoe = 2;
-+ hash_entry->param.pppoe = i+1;
-+ hash_entry->action.bits.vlan = 2;
-+ hash_entry->param.vlan = i+5;
-+ break;
-+ case 3:
-+ hash_entry->action.bits.pppoe = 1;
-+ hash_entry->param.pppoe = i+1;
-+ hash_entry->action.bits.vlan = 1;
-+ hash_entry->param.vlan = i+5;
-+ break;
-+ }
-+ hash_entry->tmo.counter = hash_entry->tmo.interval = 0x7fff;
-+ hash_index = nat_build_keys(&hash_entry->key);
-+ nat_write_hash_entry(hash_index, hash_entry);
-+ hash_nat_enable_owner(hash_index);
-+ hash_validate_entry(hash_index); // Must last one, else HW Tx fast than SW
-+ }
-+ }
-+}
-+#endif // SL351x_NAT_TEST_BY_SMARTBITS
-+
-+#endif // CONFIG_SL351x_NAT
-+
---- /dev/null
-+++ b/drivers/net/sl351x_proc.c
-@@ -0,0 +1,578 @@
-+/****************************************************************************
-+* Copyright 2006 Storlink Corp. All rights reserved.
-+*----------------------------------------------------------------------------
-+* Name : sl351x_proc.c
-+* Description :
-+* Handle Proc Routines for Storlink SL351x Platform
-+*
-+* History
-+*
-+* Date Writer Description
-+*----------------------------------------------------------------------------
-+* 04/13/2006 Gary Chen Create and implement
-+*
-+*
-+****************************************************************************/
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/compiler.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/ioport.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/rtnetlink.h>
-+#include <linux/delay.h>
-+#include <linux/ethtool.h>
-+#include <linux/mii.h>
-+#include <linux/completion.h>
-+#include <asm/hardware.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/semaphore.h>
-+#include <asm/arch/irqs.h>
-+#include <asm/arch/it8712.h>
-+#include <linux/mtd/kvctl.h>
-+#include <linux/skbuff.h>
-+#include <linux/if_ether.h>
-+#include <linux/if_pppox.h>
-+#include <linux/in.h>
-+#include <linux/ip.h>
-+#include <linux/tcp.h>
-+#include <linux/ppp_defs.h>
-+#ifdef CONFIG_NETFILTER
-+// #include <linux/netfilter_ipv4/ip_conntrack.h>
-+#endif
-+#include <linux/proc_fs.h>
-+#include <linux/seq_file.h>
-+#include <linux/percpu.h>
-+#ifdef CONFIG_SYSCTL
-+#include <linux/sysctl.h>
-+#endif
-+
-+#define MIDWAY
-+#define SL_LEPUS
-+
-+// #define PROC_DEBUG_MSG 1
-+
-+#include <asm/arch/sl2312.h>
-+#include <asm/arch/sl351x_gmac.h>
-+#include <asm/arch/sl351x_hash_cfg.h>
-+#include <asm/arch/sl351x_nat_cfg.h>
-+#include <asm/arch/sl351x_toe.h>
-+
-+#ifdef CONFIG_PROC_FS
-+/*----------------------------------------------------------------------
-+* Definition
-+*----------------------------------------------------------------------*/
-+#define proc_printf printk
-+#define SL351x_GMAC_PROC_NAME "sl351x_gmac"
-+#define SL351x_NAT_PROC_NAME "sl351x_nat"
-+#define SL351x_TOE_PROC_NAME "sl351x_toe"
-+
-+/*----------------------------------------------------------------------
-+* Function Definition
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_NAT
-+static int nat_ct_open(struct inode *inode, struct file *file);
-+static void *nat_ct_seq_start(struct seq_file *s, loff_t *pos);
-+static void nat_ct_seq_stop(struct seq_file *s, void *v);
-+static void *nat_ct_seq_next(struct seq_file *s, void *v, loff_t *pos);
-+static int nat_ct_seq_show(struct seq_file *s, void *v);
-+#endif
-+
-+#ifdef CONFIG_SL351x_RXTOE
-+static int toe_ct_open(struct inode *inode, struct file *file);
-+static void *toe_ct_seq_start(struct seq_file *s, loff_t *pos);
-+static void toe_ct_seq_stop(struct seq_file *s, void *v);
-+static void *toe_ct_seq_next(struct seq_file *s, void *v, loff_t *pos);
-+static int toe_ct_seq_show(struct seq_file *s, void *v);
-+extern int sl351x_get_toe_conn_flag(int index);
-+extern struct toe_conn * sl351x_get_toe_conn_info(int index);
-+#endif
-+
-+static int gmac_ct_open(struct inode *inode, struct file *file);
-+static void *gmac_ct_seq_start(struct seq_file *s, loff_t *pos);
-+static void gmac_ct_seq_stop(struct seq_file *s, void *v);
-+static void *gmac_ct_seq_next(struct seq_file *s, void *v, loff_t *pos);
-+static int gmac_ct_seq_show(struct seq_file *s, void *v);
-+
-+
-+/*----------------------------------------------------------------------
-+* Data
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SYSCTL
-+// static struct ctl_table_header *nat_ct_sysctl_header;
-+#endif
-+
-+#ifdef CONFIG_SL351x_NAT
-+static struct seq_operations nat_ct_seq_ops = {
-+ .start = nat_ct_seq_start,
-+ .next = nat_ct_seq_next,
-+ .stop = nat_ct_seq_stop,
-+ .show = nat_ct_seq_show
-+};
-+
-+static struct file_operations nat_file_ops= {
-+ .owner = THIS_MODULE,
-+ .open = nat_ct_open,
-+ .read = seq_read,
-+ .llseek = seq_lseek,
-+ .release = seq_release
-+};
-+#endif // CONFIG_SL351x_NAT
-+
-+#ifdef CONFIG_SL351x_RXTOE
-+static struct seq_operations toe_ct_seq_ops = {
-+ .start = toe_ct_seq_start,
-+ .next = toe_ct_seq_next,
-+ .stop = toe_ct_seq_stop,
-+ .show = toe_ct_seq_show
-+};
-+
-+static struct file_operations toe_file_ops= {
-+ .owner = THIS_MODULE,
-+ .open = toe_ct_open,
-+ .read = seq_read,
-+ .llseek = seq_lseek,
-+ .release = seq_release
-+};
-+#endif
-+
-+static struct seq_operations gmac_ct_seq_ops = {
-+ .start = gmac_ct_seq_start,
-+ .next = gmac_ct_seq_next,
-+ .stop = gmac_ct_seq_stop,
-+ .show = gmac_ct_seq_show
-+};
-+
-+static struct file_operations gmac_file_ops= {
-+ .owner = THIS_MODULE,
-+ .open = gmac_ct_open,
-+ .read = seq_read,
-+ .llseek = seq_lseek,
-+ .release = seq_release
-+};
-+
-+#ifdef SL351x_GMAC_WORKAROUND
-+extern u32 gmac_workaround_cnt[4];
-+extern u32 gmac_short_frame_workaround_cnt[2];
-+#ifdef CONFIG_SL351x_NAT
-+ extern u32 sl351x_nat_workaround_cnt;
-+#endif
-+#endif
-+/*----------------------------------------------------------------------
-+* nat_ct_open
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_NAT
-+static int nat_ct_open(struct inode *inode, struct file *file)
-+{
-+ return seq_open(file, &nat_ct_seq_ops);
-+}
-+#endif // CONFIG_SL351x_NAT
-+/*----------------------------------------------------------------------
-+* nat_ct_seq_start
-+* find the first
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_NAT
-+static void *nat_ct_seq_start(struct seq_file *s, loff_t *pos)
-+{
-+ int i;
-+
-+ // proc_printf("%s: *pos=%d\n", __func__, (int)*pos);
-+ for (i=*pos; i<HASH_TOTAL_ENTRIES; i++)
-+ {
-+ if (hash_get_nat_owner_flag(i))
-+ {
-+ *pos = i;
-+ return (void *)(i+1);
-+ }
-+ }
-+ return NULL;
-+}
-+#endif // CONFIG_SL351x_NAT
-+/*----------------------------------------------------------------------
-+* nat_ct_seq_stop
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_NAT
-+static void nat_ct_seq_stop(struct seq_file *s, void *v)
-+{
-+}
-+#endif // CONFIG_SL351x_NAT
-+/*----------------------------------------------------------------------
-+* nat_ct_seq_next
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_NAT
-+static void *nat_ct_seq_next(struct seq_file *s, void *v, loff_t *pos)
-+{
-+ int i;
-+
-+ // proc_printf("%s: *pos=%d\n", __func__, (int)*pos);
-+ (*pos)++;
-+ for (i=*pos; i<HASH_TOTAL_ENTRIES; i++)
-+ {
-+ if (hash_get_nat_owner_flag(i))
-+ {
-+ *pos = i;
-+ return (void *)(i+1);
-+ }
-+ }
-+ return NULL;
-+}
-+#endif // CONFIG_SL351x_NAT
-+/*----------------------------------------------------------------------
-+* nat_ct_seq_show
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_NAT
-+static int nat_ct_seq_show(struct seq_file *s, void *v)
-+{
-+ int idx;
-+ NAT_HASH_ENTRY_T *nat_entry;
-+ GRE_HASH_ENTRY_T *gre_entry;
-+
-+ idx = (int)v;
-+ if (idx<=0 || idx >HASH_TOTAL_ENTRIES)
-+ return -ENOSPC;
-+
-+ idx--;
-+ nat_entry = (NAT_HASH_ENTRY_T *)&hash_tables[idx];
-+ gre_entry = (GRE_HASH_ENTRY_T *)nat_entry;
-+ if (nat_entry->key.ip_protocol == IPPROTO_GRE)
-+ {
-+ if (seq_printf(s, "%4d: KEY MAC-%d [%d] %u.%u.%u.%u [%u]-->%u.%u.%u.%u\n",
-+ idx, gre_entry->key.port_id, gre_entry->key.ip_protocol,
-+ HIPQUAD(gre_entry->key.sip), ntohs(gre_entry->key.call_id),
-+ HIPQUAD(gre_entry->key.dip)))
-+ return -ENOSPC;
-+ if (seq_printf(s, " PARAMETER: %u.%u.%u.%u -->%u.%u.%u.%u [%u] Timeout:%ds\n",
-+ HIPQUAD(gre_entry->param.Sip),
-+ HIPQUAD(gre_entry->param.Dip), gre_entry->param.Dport,
-+ gre_entry->tmo.counter))
-+ return -ENOSPC;
-+ }
-+ else
-+ {
-+ if (seq_printf(s, "%4d: KEY MAC-%d [%d] %u.%u.%u.%u [%u]-->%u.%u.%u.%u [%u]\n",
-+ idx, nat_entry->key.port_id, nat_entry->key.ip_protocol,
-+ HIPQUAD(nat_entry->key.sip), ntohs(nat_entry->key.sport),
-+ HIPQUAD(nat_entry->key.dip), ntohs(nat_entry->key.dport)))
-+ return -ENOSPC;
-+ if (seq_printf(s, " PARAMETER: %u.%u.%u.%u [%u]-->%u.%u.%u.%u [%u] Timeout:%ds\n",
-+ HIPQUAD(nat_entry->param.Sip), nat_entry->param.Sport,
-+ HIPQUAD(nat_entry->param.Dip), nat_entry->param.Dport,
-+ nat_entry->tmo.counter))
-+ return -ENOSPC;
-+ }
-+ return 0;
-+}
-+#endif // CONFIG_SL351x_NAT
-+
-+/*----------------------------------------------------------------------
-+* toe_ct_open
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_RXTOE
-+static int toe_ct_open(struct inode *inode, struct file *file)
-+{
-+ return seq_open(file, &toe_ct_seq_ops);
-+}
-+#endif
-+/*----------------------------------------------------------------------
-+* toe_ct_seq_start
-+* find the first
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_RXTOE
-+static void *toe_ct_seq_start(struct seq_file *s, loff_t *pos)
-+{
-+ int i;
-+
-+ // proc_printf("%s: *pos=%d\n", __func__, (int)*pos);
-+ for (i=*pos; i<TOE_TOE_QUEUE_NUM; i++)
-+ {
-+ if (sl351x_get_toe_conn_flag(i))
-+ {
-+ *pos = i;
-+ return (void *)(i+1);
-+ }
-+ }
-+ return NULL;
-+}
-+#endif
-+/*----------------------------------------------------------------------
-+* toe_ct_seq_stop
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_RXTOE
-+static void toe_ct_seq_stop(struct seq_file *s, void *v)
-+{
-+}
-+#endif
-+/*----------------------------------------------------------------------
-+* toe_ct_seq_next
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_RXTOE
-+static void *toe_ct_seq_next(struct seq_file *s, void *v, loff_t *pos)
-+{
-+ int i;
-+
-+ // proc_printf("%s: *pos=%d\n", __func__, (int)*pos);
-+ (*pos)++;
-+ for (i=*pos; i<TOE_TOE_QUEUE_NUM; i++)
-+ {
-+ if (sl351x_get_toe_conn_flag(i))
-+ {
-+ *pos = i;
-+ return (void *)(i+1);
-+ }
-+ }
-+ return NULL;
-+}
-+#endif
-+/*----------------------------------------------------------------------
-+* toe_ct_seq_show
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_SL351x_RXTOE
-+static int toe_ct_seq_show(struct seq_file *s, void *v)
-+{
-+ int idx;
-+ struct toe_conn *toe_entry;
-+
-+ idx = (int)v;
-+ if (idx<=0 || idx >TOE_TOE_QUEUE_NUM)
-+ return -ENOSPC;
-+
-+ idx--;
-+ toe_entry = (struct toe_conn *)sl351x_get_toe_conn_info(idx);
-+ if (!toe_entry)
-+ return -ENOSPC;
-+
-+ if (seq_printf(s, "%4d: Qid %d MAC-%d TCP %u.%u.%u.%u [%u]-->%u.%u.%u.%u [%u]\n",
-+ idx, toe_entry->qid, toe_entry->gmac->port_id,
-+ NIPQUAD(toe_entry->saddr[0]), ntohs(toe_entry->source),
-+ NIPQUAD(toe_entry->daddr[0]), ntohs(toe_entry->dest)))
-+ return -ENOSPC;
-+ return 0;
-+}
-+#endif
-+/*----------------------------------------------------------------------
-+* gmac_ct_open
-+*----------------------------------------------------------------------*/
-+static int gmac_ct_open(struct inode *inode, struct file *file)
-+{
-+ return seq_open(file, &gmac_ct_seq_ops);
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_ct_seq_start
-+* find the first
-+*----------------------------------------------------------------------*/
-+static void *gmac_ct_seq_start(struct seq_file *s, loff_t *pos)
-+{
-+ int i;
-+ i = (int)*pos + 1;;
-+
-+ if (i > 9)
-+ return NULL;
-+ else
-+ return (void *)i;
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_ct_seq_stop
-+*----------------------------------------------------------------------*/
-+static void gmac_ct_seq_stop(struct seq_file *s, void *v)
-+{
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_ct_seq_next
-+*----------------------------------------------------------------------*/
-+static void *gmac_ct_seq_next(struct seq_file *s, void *v, loff_t *pos)
-+{
-+ int i;
-+
-+ // proc_printf("%s: *pos=%d\n", __func__, (int)*pos);
-+
-+ (*pos)++;
-+ i = (int)*pos + 1;;
-+
-+ if (i > 9)
-+ return NULL;
-+ else
-+ return (void *)i;
-+}
-+
-+/*----------------------------------------------------------------------
-+* seq_dm_long
-+*----------------------------------------------------------------------*/
-+static void seq_dm_long(struct seq_file *s, u32 location, int length)
-+{
-+ u32 *start_p, *curr_p, *end_p;
-+ u32 *datap, data;
-+ int i;
-+
-+ //if (length > 1024)
-+ // length = 1024;
-+
-+ start_p = (u32 *)location;
-+ end_p = (u32 *)location + length;
-+ curr_p = (u32 *)((u32)location & 0xfffffff0);
-+ datap = (u32 *)location;
-+ while (curr_p < end_p)
-+ {
-+ cond_resched();
-+ seq_printf(s, "0x%08x: ",(u32)curr_p & 0xfffffff0);
-+ for (i=0; i<4; i++)
-+ {
-+ if (curr_p < start_p || curr_p >= end_p)
-+ seq_printf(s, " ");
-+ else
-+ {
-+ data = *datap;
-+ seq_printf(s, "%08X ", data);
-+ }
-+ if (i==1)
-+ seq_printf(s, "- ");
-+
-+ curr_p++;
-+ datap++;
-+ }
-+ seq_printf(s, "\n");
-+ }
-+}
-+
-+/*----------------------------------------------------------------------
-+* gmac_ct_seq_show
-+*----------------------------------------------------------------------*/
-+static int gmac_ct_seq_show(struct seq_file *s, void *v)
-+{
-+ switch ((int)v)
-+ {
-+ case 1:
-+ seq_printf(s, "\nGMAC Global Registers\n");
-+ seq_dm_long(s, TOE_GLOBAL_BASE, 32);
-+ break;
-+ case 2:
-+ seq_printf(s, "\nGMAC Non-TOE Queue Header\n");
-+ seq_dm_long(s, TOE_NONTOE_QUE_HDR_BASE, 12);
-+ break;
-+ case 3:
-+ seq_printf(s, "\nGMAC TOE Queue Header\n");
-+ seq_dm_long(s, TOE_TOE_QUE_HDR_BASE, 12);
-+ break;
-+ case 4:
-+ seq_printf(s, "\nGMAC-0 DMA Registers\n");
-+ seq_dm_long(s, TOE_GMAC0_DMA_BASE, 52);
-+ break;
-+ case 5:
-+ seq_printf(s, "\nGMAC-0 Registers\n");
-+ seq_dm_long(s, TOE_GMAC0_BASE, 32);
-+ break;
-+ case 6:
-+ seq_printf(s, "\nGMAC-1 DMA Registers\n");
-+ seq_dm_long(s, TOE_GMAC1_DMA_BASE, 52);
-+ break;
-+ case 7:
-+ seq_printf(s, "\nGMAC-1 Registers\n");
-+ seq_dm_long(s, TOE_GMAC1_BASE, 32);
-+ break;
-+ case 8:
-+ seq_printf(s, "\nGLOBAL Registers\n");
-+ seq_dm_long(s, GMAC_GLOBAL_BASE_ADDR, 16);
-+ break;
-+ case 9:
-+#ifdef SL351x_GMAC_WORKAROUND
-+ seq_printf(s, "\nGMAC-0 Rx/Tx/Short Workaround: %u, %u, %u\n", gmac_workaround_cnt[0], gmac_workaround_cnt[1], gmac_short_frame_workaround_cnt[0]);
-+ seq_printf(s, "GMAC-1 Rx/Tx/Short Workaround: %u, %u, %u\n", gmac_workaround_cnt[2], gmac_workaround_cnt[3], gmac_short_frame_workaround_cnt[1]);
-+#ifdef CONFIG_SL351x_NAT
-+ seq_printf(s, "NAT Workaround: %u\n", sl351x_nat_workaround_cnt);
-+#endif
-+#endif
-+ break;
-+ default:
-+ return -ENOSPC;
-+ }
-+ return 0;
-+}
-+
-+/*----------------------------------------------------------------------
-+* init
-+*----------------------------------------------------------------------*/
-+static int __init init(void)
-+{
-+ struct proc_dir_entry *proc_gmac=NULL;
-+
-+#ifdef CONFIG_SL351x_NAT
-+ struct proc_dir_entry *proc_nat=NULL;
-+#endif
-+
-+#ifdef CONFIG_SL351x_RXTOE
-+ struct proc_dir_entry *proc_toe=NULL;
-+#endif
-+
-+#ifdef CONFIG_SYSCTL
-+ // nat_ct_sysctl_header = NULL;
-+#endif
-+ proc_gmac = proc_net_fops_create(SL351x_GMAC_PROC_NAME, 0440, &gmac_file_ops);
-+ if (!proc_gmac) goto init_bad;
-+
-+#ifdef CONFIG_SL351x_NAT
-+ proc_nat = proc_net_fops_create(SL351x_NAT_PROC_NAME, 0440, &nat_file_ops);
-+ if (!proc_nat) goto init_bad;
-+#endif // CONFIG_SL351x_NAT
-+
-+#ifdef CONFIG_SL351x_RXTOE
-+ proc_toe = proc_net_fops_create(SL351x_TOE_PROC_NAME, 0440, &toe_file_ops);
-+ if (!proc_toe) goto init_bad;
-+#endif
-+
-+#ifdef CONFIG_SYSCTL
-+ // nat_ct_sysctl_header = register_sysctl_table(nat_ct_net_table, 0);
-+ // if (!nat_ct_sysctl_header) goto init_bad;
-+#endif
-+
-+ return 0;
-+
-+init_bad:
-+ if (proc_gmac) proc_net_remove(SL351x_GMAC_PROC_NAME);
-+
-+#ifdef CONFIG_SL351x_NAT
-+ if (proc_nat) proc_net_remove(SL351x_NAT_PROC_NAME);
-+#endif
-+
-+#ifdef CONFIG_SL351x_RXTOE
-+ if (proc_toe) proc_net_remove(SL351x_NAT_PROC_NAME);
-+#endif
-+
-+#ifdef CONFIG_SYSCTL
-+ // if (nat_ct_sysctl_header) unregister_sysctl_table(nat_ct_sysctl_header);
-+#endif
-+ proc_printf("SL351x NAT Proc: can't create proc or register sysctl.\n");
-+ return -ENOMEM;
-+}
-+
-+/*----------------------------------------------------------------------
-+* fini
-+*----------------------------------------------------------------------*/
-+static void __exit fini(void)
-+{
-+ proc_net_remove(SL351x_GMAC_PROC_NAME);
-+
-+#ifdef CONFIG_SL351x_NAT
-+ proc_net_remove(SL351x_NAT_PROC_NAME);
-+#endif
-+
-+#ifdef CONFIG_SL351x_RXTOE
-+ proc_net_remove(SL351x_TOE_PROC_NAME);
-+#endif
-+
-+#ifdef CONFIG_SYSCTL
-+ // unregister_sysctl_table(nat_ct_sysctl_header);
-+#endif
-+}
-+
-+/*----------------------------------------------------------------------
-+* module
-+*----------------------------------------------------------------------*/
-+module_init(init);
-+module_exit(fini);
-+
-+#endif // CONFIG_PROC_FS
---- /dev/null
-+++ b/drivers/net/sl351x_toe.c
-@@ -0,0 +1,1083 @@
-+/**************************************************************************
-+* Copyright 2006 StorLink Semiconductors, Inc. All rights reserved.
-+*--------------------------------------------------------------------------
-+* Name : sl351x_toe.c
-+* Description :
-+* Provide TOE routines for SL351x
-+*
-+* History
-+*
-+* Date Writer Description
-+*----------------------------------------------------------------------------
-+* Xiaochong
-+*
-+****************************************************************************/
-+
-+#include <linux/pci.h>
-+#include <linux/ip.h>
-+#include <linux/ipv6.h>
-+#include <linux/tcp.h>
-+#include <linux/slab.h>
-+#include <linux/etherdevice.h>
-+#include <asm/io.h>
-+#include <linux/sysctl_storlink.h>
-+#include <net/tcp.h>
-+#include <linux/if_ether.h>
-+#include <asm/arch/sl351x_gmac.h>
-+#include <asm/arch/sl351x_toe.h>
-+#include <asm/arch/sl351x_hash_cfg.h>
-+#include <asm/arch/sl351x_nat_cfg.h>
-+
-+static int in_toe_isr;
-+static int toe_initialized=0;
-+
-+static struct toe_conn toe_connections[TOE_TOE_QUEUE_NUM];
-+EXPORT_SYMBOL(toe_connections);
-+static __u32 toe_connection_bits[TOE_TOE_QUEUE_NUM/32] __attribute__ ((aligned(16)));
-+struct sk_buff* gen_pure_ack(struct toe_conn* connection, TOE_QHDR_T* toe_qhdr, INTR_QHDR_T *intr_curr_desc);
-+
-+extern struct storlink_sysctl storlink_ctl;
-+extern TOE_INFO_T toe_private_data;
-+extern spinlock_t gmac_fq_lock;
-+extern void mac_write_dma_reg(int mac, unsigned int offset, u32 data);
-+extern int mac_set_rule_reg(int mac, int rule, int enabled, u32 reg0, u32 reg1, u32 reg2);
-+extern int hash_add_toe_entry(HASH_ENTRY_T *entry);
-+extern void toe_gmac_fill_free_q(void);
-+
-+#define _DEBUG_SKB_ 1
-+#ifdef _DEBUG_SKB_
-+/*---------------------------------------------------------------------------
-+ * _debug_skb
-+ *-------------------------------------------------------------------------*/
-+static inline void _debug_skb(struct sk_buff *skb, GMAC_RXDESC_T *toe_curr_desc, u32 data)
-+{
-+ if ((u32)skb < 0x1000)
-+ {
-+ printk("%s skb=%x\n", __func__, (u32)skb);
-+ while(1);
-+ }
-+ REG32(__va(toe_curr_desc->word2.buf_adr)-SKB_RESERVE_BYTES) = data;
-+}
-+#else
-+#define _debug_skb(x, y, z)
-+#endif
-+
-+/*---------------------------------------------------------------------------
-+ * get_connection_seq_num
-+ *-------------------------------------------------------------------------*/
-+u32 get_connection_seq_num(unsigned short qid)
-+{
-+ TOE_QHDR_T *toe_qhdr;
-+
-+ toe_qhdr = (TOE_QHDR_T*)TOE_TOE_QUE_HDR_BASE;
-+ toe_qhdr += qid;
-+ return (u32)toe_qhdr->word3.seq_num;
-+}
-+EXPORT_SYMBOL(get_connection_seq_num);
-+
-+/*---------------------------------------------------------------------------
-+ * get_connection_ack_num
-+ *-------------------------------------------------------------------------*/
-+u32 get_connection_ack_num(unsigned short qid)
-+{
-+ TOE_QHDR_T *toe_qhdr;
-+
-+ toe_qhdr = (TOE_QHDR_T*)TOE_TOE_QUE_HDR_BASE;
-+ toe_qhdr += qid;
-+ return (u32)toe_qhdr->word4.ack_num;
-+}
-+EXPORT_SYMBOL(get_connection_ack_num);
-+
-+/*---------------------------------------------------------------------------
-+ * dump_toe_qhdr
-+ *-------------------------------------------------------------------------*/
-+void dump_toe_qhdr(TOE_QHDR_T *toe_qhdr)
-+{
-+ printk("TOE w1 %x, w2 %x, w3 %x\n", toe_qhdr->word1.bits32,
-+ toe_qhdr->word2.bits32, toe_qhdr->word3.bits32);
-+ printk("w4 %x, w5 %x, w6 %x\n", toe_qhdr->word4.bits32,
-+ toe_qhdr->word5.bits32, toe_qhdr->word6.bits32);
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * dump_intrq_desc
-+ *-------------------------------------------------------------------------*/
-+void dump_intrq_desc(INTR_QHDR_T *intr_curr_desc)
-+{
-+ printk("INTR w0 %x, w1 %x, seq %x\n", intr_curr_desc->word0.bits32,
-+ intr_curr_desc->word1.bits32, intr_curr_desc->word2.bits32);
-+ printk("ack %x, w4 %x\n", intr_curr_desc->word3.bits32,
-+ intr_curr_desc->word4.bits32);
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * This routine will initialize a TOE matching rule
-+ * called by SL351x GMAC driver.
-+ *-------------------------------------------------------------------------*/
-+void sl351x_toe_init(void)
-+{
-+ GMAC_MRxCR0_T mrxcr0;
-+ GMAC_MRxCR1_T mrxcr1;
-+ GMAC_MRxCR2_T mrxcr2;
-+ int rule, rc;
-+
-+ if (toe_initialized)
-+ return;
-+
-+ toe_initialized = 1;
-+
-+#ifndef CONFIG_SL351x_NAT
-+ mrxcr0.bits32 = 0;
-+ mrxcr1.bits32 = 0;
-+ mrxcr2.bits32 = 0;
-+ mrxcr0.bits.l3 = 1;
-+ mrxcr0.bits.l4 = 1;
-+ mrxcr1.bits.sip = 1;
-+ mrxcr1.bits.dip = 1;
-+ mrxcr1.bits.l4_byte0_15 = 0x0f;
-+ mrxcr0.bits.sprx = 1;
-+ rule = 0;
-+ rc = mac_set_rule_reg(0, rule, 1, mrxcr0.bits32, mrxcr1.bits32,
-+ mrxcr2.bits32);
-+ if (rc<0) {
-+ printk("%s::Set MAC 0 rule fail!\n", __func__);
-+ }
-+ rc = mac_set_rule_reg(1, rule, 1, mrxcr0.bits32, mrxcr1.bits32,
-+ mrxcr2.bits32);
-+ if (rc<0) {
-+ printk("%s::Set MAC 1 rule fail!\n", __func__);
-+ }
-+#endif // CONFIG_SL351x_NAT
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * dump_intrq_desc
-+ * assign an interrupt queue number to a give tcp queue
-+ *-------------------------------------------------------------------------*/
-+int get_interrupt_queue_id(int tcp_qid)
-+{
-+ return (int)(tcp_qid & 0x0003);
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * reset_connection_index
-+ * reset the connection bit by given index
-+ *-------------------------------------------------------------------------*/
-+void reset_connection_index(__u8 index)
-+{
-+ __u32 mask = ~(0xffffffff & (1<< (index&0x1f)));
-+ toe_connection_bits[index>>5] = toe_connection_bits[index>>5] & mask;
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * update_timer
-+ *-------------------------------------------------------------------------*/
-+void update_timer(struct toe_conn* connection)
-+{
-+// if (time_before(jiffies, connection->last_rx_jiffies+3))
-+// if ((jiffies + 0xffffffff - connection->last_rx_jiffies) & 0x3)
-+// if (connection->last_rx_jiffies > jiffies)
-+// printk("%s::jif %g, last_rx_jif %g\n", __func__, jiffies, connection->last_rx_jiffies);
-+/* if ((long)(jiffies + 2)< 3) { // overflow...
-+ printk("%s::jiffies %x\n", __func__, jiffies);
-+ } */
-+// if ((long)(jiffies - connection->last_rx_jiffies)< 2)
-+// return;
-+ connection->last_rx_jiffies = jiffies;
-+ // gary chen mod_timer(&connection->rx_timer, jiffies+2);
-+ connection->rx_timer.expires = jiffies + 2;
-+ add_timer(&connection->rx_timer);
-+// printk("%s::nt %x, lj %x\n", __func__, (jiffies+2), connection->last_rx_jiffies);
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * gen_pure_ack
-+ *-------------------------------------------------------------------------*/
-+struct sk_buff* gen_pure_ack(struct toe_conn* connection, TOE_QHDR_T* toe_qhdr,
-+INTR_QHDR_T *intr_curr_desc)
-+{
-+ struct sk_buff *skb;
-+ struct iphdr *ip_hdr;
-+ struct tcphdr *tcp_hdr;
-+ struct ethhdr *eth_hdr;
-+
-+ if ((skb= dev_alloc_skb(RX_BUF_SIZE))==NULL) {
-+ printk("%s::alloc pure ack fail!\n", __func__);
-+ return NULL;
-+ }
-+ skb_reserve(skb, RX_INSERT_BYTES);
-+ memset(skb->data, 0, 60);
-+
-+ eth_hdr = (struct ethhdr*)&(skb->data[0]);
-+ memcpy(eth_hdr, &connection->l2_hdr, sizeof(struct ethhdr));
-+
-+ ip_hdr = (struct iphdr*)&(skb->data[14]);
-+ ip_hdr->version = connection->ip_ver;
-+ ip_hdr->ihl = 20>>2;
-+ ip_hdr->tot_len = ntohs(40);
-+ ip_hdr->frag_off = htons(IP_DF);
-+ ip_hdr->ttl = 128;
-+ ip_hdr->protocol = 0x06;
-+ ip_hdr->saddr = connection->saddr[0];
-+ ip_hdr->daddr = connection->daddr[0];
-+// printk("%s ip sa %x, da %x\n",
-+// __func__, ntohl(ip_hdr->saddr), ntohl(ip_hdr->daddr));
-+
-+ tcp_hdr = (struct tcphdr*)&(skb->data[34]);
-+ tcp_hdr->source = connection->source;
-+ tcp_hdr->dest = connection->dest;
-+ if (intr_curr_desc) {
-+ tcp_hdr->seq = htonl(intr_curr_desc->word2.seq_num);
-+ tcp_hdr->ack_seq = htonl(intr_curr_desc->word3.ack_num);
-+ tcp_hdr->window = htons(intr_curr_desc->word0.bits.win_size);
-+ } else {
-+ tcp_hdr->seq = htonl(toe_qhdr->word3.seq_num);
-+ tcp_hdr->ack_seq = htonl(toe_qhdr->word4.ack_num);
-+ tcp_hdr->window = htons(toe_qhdr->word6.bits.WinSize);
-+ }
-+ tcp_hdr->ack = 1;
-+ tcp_hdr->doff = 20 >> 2;
-+#if 0
-+ if (!intr_curr_desc) {
-+ unsigned char byte;
-+ for (i=0; i<20; i++) {
-+ byte = skb->data[34+i];
-+ printk("%x ", byte);
-+ }
-+ printk("\n");
-+ }
-+#endif
-+ TCP_SKB_CB(skb)->connection = connection;
-+ return skb;
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * connection_rx_timer
-+ *-------------------------------------------------------------------------*/
-+void connection_rx_timer(unsigned long *data)
-+{
-+ struct toe_conn *connection = (struct toe_conn*)data;
-+ unsigned int tcp_qid, toeq_wptr;
-+ unsigned int pkt_size, desc_count;
-+ struct sk_buff *skb;
-+ GMAC_RXDESC_T *toe_curr_desc;
-+ TOE_QHDR_T *toe_qhdr;
-+ struct net_device *dev;
-+ unsigned long conn_flags;
-+ DMA_RWPTR_T toeq_rwptr;
-+ unsigned short timeout_descs;
-+
-+ if (in_toe_isr)
-+ printk("%s::in_toe_isr=%d!\n", __func__, in_toe_isr);
-+
-+ if (connection) {
-+ /* should we disable gmac interrupt first? */
-+ if (!connection->gmac)
-+ printk("%s::conn gmac %x!\n", __func__, (u32)connection->gmac);
-+ local_irq_save(conn_flags);
-+ if (!spin_trylock(&connection->conn_lock)) {
-+ local_irq_restore(conn_flags);
-+ // timer should be updated by the toeq isr. So no need to update here.
-+ printk("%s::conn_lock is held by ISR!\n", __func__);
-+ return;
-+ }
-+ disable_irq(connection->gmac->irq);
-+
-+ /* disable hash entry and get toeq desc. */
-+ hash_set_valid_flag(connection->hash_entry_index, 0);
-+ do{} while(0); /* wait until HW finish */
-+
-+ dev = connection->dev;
-+ if (!dev)
-+ printk("%s::conn dev NULL!\n", __func__);
-+ tcp_qid = connection->qid;
-+ toe_qhdr = (TOE_QHDR_T *)(TOE_TOE_QUE_HDR_BASE +
-+ tcp_qid * sizeof(TOE_QHDR_T));
-+ toeq_rwptr.bits32 = readl(&toe_qhdr->word1);
-+ toeq_wptr = toe_qhdr->word1.bits.wptr;
-+ timeout_descs = toeq_wptr - toeq_rwptr.bits.rptr;
-+
-+ if (toeq_rwptr.bits.rptr == toeq_wptr) {
-+ if (toe_qhdr->word5.bits32) {
-+ // shall we check toe_qhdr->word2.bits?
-+ skb = gen_pure_ack(connection, toe_qhdr, (INTR_QHDR_T *)NULL);
-+ skb_put(skb, 54);
-+ skb->dev = connection->dev;
-+ skb->ip_summed = CHECKSUM_UNNECESSARY;
-+ skb->protocol = eth_type_trans(skb, connection->dev);
-+ netif_rx(skb);
-+ connection->dev->last_rx = jiffies;
-+ }
-+ } else {
-+ while (toeq_rwptr.bits.rptr != toeq_rwptr.bits.wptr) {
-+ /* we just simply send those packets to tcp? */
-+ toe_curr_desc = (GMAC_RXDESC_T*)(toe_private_data.toe_desc_base[tcp_qid]
-+ + toeq_rwptr.bits.rptr * sizeof(GMAC_RXDESC_T));
-+ connection->curr_desc = toe_curr_desc;
-+ if (toe_curr_desc->word3.bits.ctrl_flag) {
-+ printk("%s::ctrl flag! %x, conn rptr %d, to %d, jif %x, conn_jif %x\n",
-+ __func__, toe_curr_desc->word3.bits32,
-+ connection->toeq_rwptr.bits.rptr, timeout_descs,
-+ (u32)jiffies, (u32)connection->last_rx_jiffies);
-+ }
-+ desc_count = toe_curr_desc->word0.bits.desc_count;
-+ pkt_size = toe_curr_desc->word1.bits.byte_count;
-+ consistent_sync((void*)__va(toe_curr_desc->word2.buf_adr), pkt_size,
-+ PCI_DMA_FROMDEVICE);
-+ skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr)-
-+ SKB_RESERVE_BYTES));
-+ _debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x02);
-+ connection->curr_rx_skb = skb;
-+ skb_reserve(skb, RX_INSERT_BYTES);
-+ skb_put(skb, pkt_size);
-+ skb->dev = dev;
-+ skb->protocol = eth_type_trans(skb, dev);
-+ {
-+ struct iphdr* ip_hdr = (struct iphdr*)&(skb->data[0]);
-+ if (toe_curr_desc->word3.bits.ctrl_flag)
-+ printk("%s::ip id %x\n", __func__, ntohs(ip_hdr->id));
-+ }
-+ skb->ip_summed = CHECKSUM_UNNECESSARY;
-+
-+ netif_rx(skb);
-+ dev->last_rx = jiffies;
-+#if 0
-+ if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
-+ printk("%s::alloc buf fail!\n", __func__);
-+ }
-+ *(unsigned int*)(skb->data) = (unsigned int)skb;
-+ connection->curr_rx_skb = skb;
-+ skb_reserve(skb, SKB_RESERVE_BYTES);
-+ spin_lock_irqsave(&connection->gmac->rx_mutex, flags);
-+ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+ if (toe_private_data.fq_rx_rwptr.bits.wptr != fq_rwptr.bits.wptr) {
-+ mac_stop_txdma((struct net_device*)connection->dev);
-+ spin_unlock_irqrestore(&connection->gmac->rx_mutex, flags);
-+ while(1);
-+ }
-+ fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base + fq_rwptr.bits.wptr;
-+ fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
-+ fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM);
-+ SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
-+ toe_private_data.fq_rx_rwptr.bits32 = fq_rwptr.bits32;
-+ spin_unlock_irqrestore(&connection->gmac->rx_mutex, flags);
-+#endif
-+// spin_lock_irqsave(&connection->gmac->rx_mutex, flags);
-+ toeq_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(toeq_rwptr.bits.rptr, TOE_TOE_DESC_NUM);
-+ SET_RPTR(&toe_qhdr->word1, toeq_rwptr.bits.rptr);
-+// spin_unlock_irqrestore(&connection->gmac->rx_mutex, flags);
-+ connection->toeq_rwptr.bits32 = toeq_rwptr.bits32;
-+ }
-+ toeq_rwptr.bits32 = readl(&toe_qhdr->word1);
-+// toe_gmac_fill_free_q();
-+ }
-+ connection->last_rx_jiffies = jiffies;
-+ if (connection->status != TCP_CONN_CLOSED)
-+ mod_timer(&connection->rx_timer, jiffies+2);
-+ if (connection->status != TCP_CONN_ESTABLISHED)
-+ printk("%s::conn status %x\n", __func__, connection->status);
-+ hash_set_valid_flag(connection->hash_entry_index, 1);
-+ enable_irq(connection->gmac->irq);
-+ // Gary Chen spin_unlock_irqrestore(&connection->conn_lock, conn_flags);
-+ }
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * free_toeq_descs
-+ *-------------------------------------------------------------------------*/
-+void free_toeq_descs(int qid, TOE_INFO_T *toe)
-+{
-+ void *desc_ptr;
-+
-+ desc_ptr = (void*)toe->toe_desc_base[qid];
-+ pci_free_consistent(NULL, TOE_TOE_DESC_NUM*sizeof(GMAC_RXDESC_T), desc_ptr,
-+ (dma_addr_t)toe->toe_desc_base_dma[qid]);
-+ toe->toe_desc_base[qid] = 0;
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * set_toeq_hdr
-+ *-------------------------------------------------------------------------*/
-+void set_toeq_hdr(struct toe_conn* connection, TOE_INFO_T* toe, struct net_device *dev)
-+{
-+ volatile TOE_QHDR_T *toe_qhdr;
-+ volatile unsigned int toeq_wptr; // toeq_rptr
-+ volatile GMAC_RXDESC_T *toe_curr_desc;
-+ struct sk_buff *skb;
-+ unsigned int pkt_size;
-+ DMA_RWPTR_T toeq_rwptr;
-+
-+ if (connection->status == TCP_CONN_CLOSING) {
-+ connection->status = TCP_CONN_CLOSED;
-+ hash_set_valid_flag(connection->hash_entry_index, 0);
-+ // remove timer first.
-+ // del_timer_sync(&(connection->rx_timer));
-+ // check if any queued frames last time.
-+ toe_qhdr = (volatile TOE_QHDR_T*)TOE_TOE_QUE_HDR_BASE;
-+ toe_qhdr += connection->qid;
-+ toeq_rwptr.bits32 = readl(&toe_qhdr->word1);
-+
-+ //toeq_rptr = toe_qhdr->word1.bits.rptr;
-+ toeq_wptr = toe_qhdr->word1.bits.wptr;
-+ while (toeq_rwptr.bits.rptr != toeq_wptr) {
-+ printk("%s::pending frames in TOE Queue before closing!\n", __func__);
-+ toe_curr_desc = (GMAC_RXDESC_T*)(toe->toe_desc_base[connection->qid] +
-+ toe_qhdr->word1.bits.rptr*sizeof(GMAC_RXDESC_T));
-+ connection->curr_desc = (GMAC_RXDESC_T *)toe_curr_desc;
-+ pkt_size = toe_curr_desc->word1.bits.byte_count;
-+ consistent_sync((void*)__va(toe_curr_desc->word2.buf_adr), pkt_size,
-+ PCI_DMA_FROMDEVICE);
-+ skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr) -
-+ SKB_RESERVE_BYTES));
-+ _debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x03);
-+ connection->curr_rx_skb = skb;
-+ skb_reserve(skb, RX_INSERT_BYTES);
-+ skb_put(skb, pkt_size);
-+ skb->dev = connection->dev;
-+ skb->protocol = eth_type_trans(skb, connection->dev);
-+ skb->ip_summed = CHECKSUM_UNNECESSARY;
-+ netif_rx(skb);
-+ connection->dev->last_rx = jiffies;
-+
-+ toeq_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(toeq_rwptr.bits.rptr, TOE_TOE_DESC_NUM);
-+ SET_RPTR(&toe_qhdr->word1, toeq_rwptr.bits.rptr);
-+ }
-+ free_toeq_descs(connection->qid, toe);
-+ // shall we re-fill free queue?
-+
-+ reset_connection_index(connection->qid);
-+ //memset(connection, 0, sizeof(struct toe_conn));
-+ printk(" del timer and close connection %x, qid %d\n", (u32)connection, connection->qid);
-+ return;
-+ }
-+ /* enable or setup toe queue header */
-+ if (connection->status == TCP_CONN_CONNECTING && storlink_ctl.rx_max_pktsize) {
-+ volatile TOE_QHDR_T *qhdr;
-+ int iq_id;
-+ connection->status = TCP_CONN_ESTABLISHED;
-+ qhdr = (volatile TOE_QHDR_T*)((unsigned int)TOE_TOE_QUE_HDR_BASE +
-+ connection->qid * sizeof(TOE_QHDR_T));
-+
-+ iq_id = get_interrupt_queue_id(connection->qid);
-+ connection->dev = dev;
-+ connection->gmac = dev->priv;
-+ connection->toeq_rwptr.bits32 = 0;
-+
-+// qhdr->word6.bits.iq_num = iq_id;
-+ qhdr->word6.bits.MaxPktSize = (connection->max_pktsize)>>2; // in word.
-+ qhdr->word7.bits.AckThreshold = connection->ack_threshold;
-+ qhdr->word7.bits.SeqThreshold = connection->seq_threshold;
-+
-+ // init timer.
-+#if 1
-+ init_timer(&connection->rx_timer);
-+ connection->rx_timer.expires = jiffies + 5;
-+ connection->rx_timer.data = (unsigned long)connection;
-+ connection->rx_timer.function = (void *)&connection_rx_timer;
-+ add_timer(&connection->rx_timer);
-+ connection->last_rx_jiffies = jiffies;
-+ printk("init_timer %x\n", (u32)jiffies);
-+#endif
-+ hash_set_valid_flag(connection->hash_entry_index, 1);
-+ return;
-+ } else {
-+ printk("%s::conn status %x, rx_pktsize %d\n",
-+ __func__, connection->status, storlink_ctl.rx_max_pktsize);
-+ }
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * get_connection_index
-+ * get_connection_index will find an available index for the connection,
-+ * when allocate a new connection is needed.
-+ * we find available Qid from AV bits and write to hash_table, so that when RxTOE
-+ * packet is received, sw_id from ToeQ descriptor is also the Qid of conneciton Q.
-+ *-------------------------------------------------------------------------*/
-+int get_connection_index(void)
-+{
-+ int i=0, j=0, index=-1;
-+ __u32 connection_bits;
-+
-+ for (i = 0; i< TOE_TOE_QUEUE_NUM/32; i++) {
-+ connection_bits = ~(toe_connection_bits[i]);
-+ if (connection_bits == 0)
-+ // all 32 bits are used.
-+ continue;
-+
-+ for (j=0; j<32; j++) {
-+ if (connection_bits & 0x01) {
-+ index = i*32 + j;
-+ return index;
-+ }
-+ connection_bits = connection_bits >> 1;
-+ }
-+ }
-+ return index;
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * set_toe_connection
-+ *-------------------------------------------------------------------------*/
-+void set_toe_connection(int index, int val)
-+{
-+ if (val) {
-+ toe_connection_bits[index/32] |= (1<<(index%32));
-+ } else {
-+ toe_connection_bits[index/32] &= (~(1<<(index%32)));
-+ }
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * sl351x_get_toe_conn_flag
-+ *-------------------------------------------------------------------------*/
-+int sl351x_get_toe_conn_flag(int index)
-+{
-+ if (index < TOE_TOE_QUEUE_NUM)
-+ return (toe_connection_bits[index/32] & (1 << (index %32)));
-+ else
-+ return 0;
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * sl351x_get_toe_conn_info
-+ *-------------------------------------------------------------------------*/
-+struct toe_conn * sl351x_get_toe_conn_info(int index)
-+{
-+ if (index < TOE_TOE_QUEUE_NUM)
-+ return (struct toe_conn *)&toe_connections[index];
-+ else
-+ return NULL;
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * create_sw_toe_connection
-+ *-------------------------------------------------------------------------*/
-+struct toe_conn* create_sw_toe_connection(int qid, int ip_ver, void* ip_hdr,
-+ struct tcphdr* tcp_hdr)
-+{
-+ struct toe_conn* connection = &(toe_connections[qid]);
-+
-+ connection->ip_ver = (__u8)ip_ver;
-+ connection->qid = (__u8)qid;
-+ connection->source = (__u16)tcp_hdr->source;
-+ connection->dest = (__u16)tcp_hdr->dest;
-+ if (ip_ver == 4) {
-+ struct iphdr* iph = (struct iphdr*) ip_hdr;
-+ connection->saddr[0] = (__u32)iph->saddr;
-+ connection->daddr[0] = (__u32)iph->daddr;
-+// printk("%s::saddr %x, daddr %x\n", __func__,
-+// ntohl(connection->saddr[0]), ntohl(connection->daddr[0]));
-+ } else if (ip_ver == 6) {
-+ struct ipv6hdr *iph = (struct ipv6hdr*)ip_hdr;
-+ int i=0;
-+ for (i=0; i<4; i++) {
-+ connection->saddr[i] = (__u32)iph->saddr.in6_u.u6_addr32[i];
-+ connection->daddr[i] = (__u32)iph->daddr.in6_u.u6_addr32[i];
-+ }
-+ }
-+ connection->status = TCP_CONN_CREATION;
-+ return connection;
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * fill_toeq_buf
-+ *-------------------------------------------------------------------------*/
-+int fill_toeq_buf(int index, TOE_INFO_T* toe)
-+{
-+ volatile TOE_QHDR_T *qhdr;
-+ //struct toe_conn* connection;
-+ GMAC_RXDESC_T *desc_ptr;
-+
-+ if (!toe->toe_desc_base[index]) {
-+ // first time. init.
-+ desc_ptr = (GMAC_RXDESC_T*)(pci_alloc_consistent(NULL, TOE_TOE_DESC_NUM
-+ *sizeof(GMAC_RXDESC_T), (dma_addr_t*)&toe->toe_desc_base_dma[index]));
-+
-+ toe->toe_desc_num = TOE_TOE_DESC_NUM;
-+ toe->toe_desc_base[index] = (unsigned int)desc_ptr;
-+ }
-+ qhdr = (volatile TOE_QHDR_T*)((unsigned int)TOE_TOE_QUE_HDR_BASE +
-+ index*sizeof(TOE_QHDR_T));
-+ //connection = (struct toe_conn*)&(toe_connections[index]);
-+
-+ qhdr->word0.base_size = ((unsigned int)toe->toe_desc_base_dma[index]&TOE_QHDR0_BASE_MASK)
-+ | TOE_TOE_DESC_POWER;
-+ qhdr->word1.bits32 = 0;
-+ qhdr->word2.bits32 = 0;
-+ qhdr->word3.bits32 = 0;
-+ qhdr->word4.bits32 = 0;
-+ qhdr->word5.bits32 = 0;
-+ return 1;
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * create_toe_hash_entry_smb
-+ * add SMB header in hash entry.
-+ *-------------------------------------------------------------------------*/
-+int create_toe_hash_entry_smb(int ip_ver, void* ip_hdr, struct tcphdr* tcp_hdr,
-+ int sw_id)
-+{
-+ HASH_ENTRY_T hash_entry, *entry;
-+ int hash_entry_index;
-+ int i;
-+
-+ entry = (HASH_ENTRY_T*)&hash_entry;
-+ memset((void*)entry, 0, sizeof(HASH_ENTRY_T));
-+ entry->rule = 0;
-+
-+ /* enable fields of hash key */
-+ entry->key_present.ip_protocol = 1;
-+ entry->key_present.sip = 1;
-+ entry->key_present.dip = 1;
-+ entry->key_present.l4_bytes_0_3 = 1; // src port and dest port
-+ entry->key_present.l7_bytes_0_3 = 0; // do we need to enable NETBIOS? how?
-+ entry->key_present.l7_bytes_4_7 = 1; // "SMB" header
-+
-+ /* hash key */
-+ entry->key.ip_protocol = IPPROTO_TCP;
-+ if (ip_ver == 4) {
-+ struct iphdr *iph = (struct iphdr*)ip_hdr;
-+ memcpy(entry->key.sip, &iph->saddr, 4);
-+ memcpy(entry->key.dip, &iph->daddr, 4);
-+ } else if (ip_ver == 6) {
-+ struct ipv6hdr *iph = (struct ipv6hdr*)ip_hdr;
-+ for (i=0; i<4; i++) {
-+ memcpy(&(entry->key.sip[i*4]), &(iph->saddr.in6_u.u6_addr32[i]), 4);
-+ memcpy(&(entry->key.dip[i*4]), &(iph->daddr.in6_u.u6_addr32[i]), 4);
-+ }
-+ }
-+ *(__u16*)&entry->key.l4_bytes[0] = tcp_hdr->source;
-+ *(__u16*)&entry->key.l4_bytes[2] = tcp_hdr->dest;
-+
-+ entry->key.l7_bytes[4] = 0xff;
-+ entry->key.l7_bytes[5] = 0x53;
-+ entry->key.l7_bytes[6] = 0x4d;
-+ entry->key.l7_bytes[7] = 0x42;
-+
-+ /* action of hash entry match */
-+ entry->action.sw_id = 1;
-+ entry->action.dest_qid = (__u8)TOE_TOE_QID(sw_id);
-+ entry->action.srce_qid = 0;
-+ hash_entry_index = hash_add_toe_entry(entry);
-+
-+ return hash_entry_index;
-+}
-+
-+// best performance of tcp streaming.
-+/*---------------------------------------------------------------------------
-+ * create_toe_hash_entry_smb
-+ * add SMB header in hash entry.
-+ *-------------------------------------------------------------------------*/
-+int create_toe_hash_entry_ftp(int ip_ver, void* ip_hdr, struct tcphdr* tcphdr)
-+{
-+ return 0;
-+}
-+
-+// is hash entry for nfs needed?
-+
-+/*
-+ * Create a TOE hash entry by given ip addresses and tcp port numbers.
-+ * hash entry index will be saved in sw connection.
-+ */
-+/*---------------------------------------------------------------------------
-+ * create_toe_hash_entry
-+ *-------------------------------------------------------------------------*/
-+int create_toe_hash_entry(int ip_ver, void* ip_hdr, struct tcphdr* tcp_hdr, int sw_id)
-+{
-+ HASH_ENTRY_T hash_entry, *entry;
-+// unsigned long hash_key[HASH_MAX_DWORDS];
-+ int hash_entry_index;
-+
-+ entry = (HASH_ENTRY_T*) &hash_entry;
-+ memset((void*)entry, 0, sizeof(HASH_ENTRY_T));
-+ entry->rule = 0;
-+ /* enable fields of hash key */
-+ entry->key_present.ip_protocol = 1;
-+ entry->key_present.sip = 1;
-+ entry->key_present.dip = 1;
-+ entry->key_present.l4_bytes_0_3 = 1; // src port and dest port
-+
-+ /* hash key */
-+ entry->key.ip_protocol = IPPROTO_TCP;
-+ if (ip_ver == 4) {
-+ // key of ipv4
-+ struct iphdr* iph = (struct iphdr*)ip_hdr;
-+ memcpy(entry->key.sip, &iph->saddr, 4);
-+ memcpy(entry->key.dip, &iph->daddr, 4);
-+ } else if (ip_ver == 6) {
-+ // key of ipv6
-+ int i=0;
-+ struct ipv6hdr *iph = (struct ipv6hdr*)ip_hdr;
-+ for (i=0; i<4; i++) {
-+ memcpy(&(entry->key.sip[i*4]), &(iph->saddr.in6_u.u6_addr32[i]), 4);
-+ memcpy(&(entry->key.dip[i*4]), &(iph->daddr.in6_u.u6_addr32[i]), 4);
-+ }
-+ }
-+ *(__u16*)&entry->key.l4_bytes[0] = tcp_hdr->source;
-+ *(__u16*)&entry->key.l4_bytes[2] = tcp_hdr->dest;
-+ // is it necessary to write ip version to hash key?
-+
-+ /* action of hash entry match */
-+ entry->action.sw_id = 1;
-+ entry->action.dest_qid = (__u8)TOE_TOE_QID(sw_id);
-+ entry->action.srce_qid = 0; // 0 for SW FreeQ. 1 for HW FreeQ.
-+ hash_entry_index = hash_add_toe_entry(entry);
-+// printk("\n%s. sw_id %d, hash_entry index %x\n",
-+// __func__, TOE_TOE_QID(sw_id), hash_entry_index);
-+ return hash_entry_index;
-+}
-+
-+/*---------------------------------------------------------------------------
-+ * init_toeq
-+ * 1. Reserve a TOE Queue id first, to get the sw toe_connection.
-+ * 2. Setup the hash entry with given iphdr and tcphdr, save hash entry index
-+ * in sw toe_connection.
-+ * 3. Prepare sw toe_connection and allocate buffers.
-+ * 4. Validate hash entry.
-+ *-------------------------------------------------------------------------*/
-+struct toe_conn* init_toeq(int ipver, void* iph, struct tcphdr* tcp_hdr,
-+ TOE_INFO_T* toe, unsigned char* l2hdr)
-+{
-+// printk("\t*** %s, ipver %d\n", __func__, ipver);
-+ int qid=-1;
-+ struct toe_conn* connection;
-+ int hash_entry_index;
-+ // int i=0;
-+ unsigned short dest_port = ntohs(tcp_hdr->dest);
-+
-+ if (dest_port == 445) {
-+ printk("%s::SMB/CIFS connection\n", __func__);
-+ } else if (dest_port == 20) {
-+ printk("%s::ftp-data connection\n", __func__);
-+ } else if (dest_port == 2049) {
-+ printk("%s::nfs daemon connection\n", __func__);
-+ }
-+ qid = get_connection_index();
-+ if (qid<0)
-+ return 0; // setup toeq failure
-+ set_toe_connection(qid, 1); // reserve this sw toeq.
-+
-+ //connection = (struct toe_conn*)&(toe_connections[qid]);
-+ hash_entry_index = create_toe_hash_entry(ipver, iph, tcp_hdr, qid);
-+ if (hash_entry_index <0) {
-+ printk("%s::release toe hash entry!\n", __func__);
-+ set_toe_connection(qid, 0); // release this sw toeq.
-+ return 0;
-+ }
-+ connection = create_sw_toe_connection(qid, ipver, iph, tcp_hdr);
-+ connection->hash_entry_index = (__u16) hash_entry_index;
-+
-+ fill_toeq_buf(qid, toe);
-+ memcpy(&connection->l2_hdr, l2hdr, sizeof(struct ethhdr));
-+ spin_lock_init(&connection->conn_lock);
-+
-+ return connection;
-+}
-+
-+#if 0
-+/*----------------------------------------------------------------------
-+* toe_init_toe_queue
-+* (1) Initialize the TOE Queue Header
-+* Register: TOE_TOE_QUE_HDR_BASE (0x60003000)
-+* (2) Initialize Descriptors of TOE Queues
-+*----------------------------------------------------------------------*/
-+void toe_init_toe_queue(TOE_INFO_T* toe)
-+{
-+}
-+EXPORT_SYMBOL(toe_init_toe_queue);
-+#endif
-+
-+/*---------------------------------------------------------------------------
-+ * dump_jumbo_skb
-+ *-------------------------------------------------------------------------*/
-+void dump_jumbo_skb(struct jumbo_frame *jumbo_skb)
-+{
-+ if (jumbo_skb->skb0) {
-+// printk("%s. jumbo skb %x, len %d\n",
-+// __func__, jumbo_skb->skb0->data, jumbo_skb->skb0->len);
-+ netif_rx(jumbo_skb->skb0);
-+ }
-+ jumbo_skb->skb0 = 0;
-+ jumbo_skb->tail = 0;
-+ jumbo_skb->iphdr0 = 0;
-+ jumbo_skb->tcphdr0 = 0;
-+}
-+
-+/* ---------------------------------------------------------------------
-+ * Append skb to skb0. skb0 is the jumbo frame that will be passed to
-+ * kernel tcp.
-+ * --------------------------------------------------------------------*/
-+void rx_append_skb(struct jumbo_frame *jumbo_skb, struct sk_buff* skb, int payload_len)
-+{
-+ struct iphdr* iphdr0 = (struct iphdr*)&(skb->data[0]);
-+ int ip_hdrlen = iphdr0->ihl << 2;
-+ struct tcphdr* tcphdr0 = (struct tcphdr*)&(skb->data[ip_hdrlen]);
-+
-+ if (!jumbo_skb->skb0) {
-+ // head of the jumbo frame.
-+ jumbo_skb->skb0 = skb;
-+ jumbo_skb->tail = 0;
-+ jumbo_skb->iphdr0 = iphdr0;
-+ jumbo_skb->tcphdr0 = tcphdr0;
-+ } else {
-+ if (!jumbo_skb->tail)
-+ skb_shinfo(jumbo_skb->skb0)->frag_list = skb;
-+ else
-+ (jumbo_skb->tail)->next = skb;
-+ jumbo_skb->tail = skb;
-+
-+ // do we need to change truesize as well?
-+ jumbo_skb->skb0->len += payload_len;
-+ jumbo_skb->skb0->data_len += payload_len;
-+
-+ jumbo_skb->iphdr0->tot_len = htons(ntohs(jumbo_skb->iphdr0->tot_len)+payload_len);
-+ jumbo_skb->tcphdr0->ack_seq = tcphdr0->ack_seq;
-+ jumbo_skb->tcphdr0->window = tcphdr0->window;
-+
-+ skb->len += payload_len;
-+ skb->data_len = 0;
-+ skb->data += ntohs(iphdr0->tot_len) - payload_len;
-+ }
-+}
-+
-+/*----------------------------------------------------------------------
-+* toe_gmac_handle_toeq
-+* (1) read interrupt Queue to get TOE Q.
-+* (2) get packet fro TOE Q and send to upper layer handler.
-+* (3) allocate new buffers and put to TOE Q. Intr Q buffer is recycled.
-+*----------------------------------------------------------------------*/
-+void toe_gmac_handle_toeq(struct net_device *dev, GMAC_INFO_T* tp, __u32 status)
-+{
-+ //volatile INTRQ_INFO_T *intrq_info;
-+ //TOEQ_INFO_T *toeq_info;
-+ volatile NONTOE_QHDR_T *intr_qhdr;
-+ volatile TOE_QHDR_T *toe_qhdr;
-+ volatile INTR_QHDR_T *intr_curr_desc;
-+ TOE_INFO_T *toe = &toe_private_data;
-+
-+ volatile GMAC_RXDESC_T *toe_curr_desc; // , *fq_desc;// *tmp_desc;
-+ volatile DMA_RWPTR_T intr_rwptr, toeq_rwptr; // fq_rwptr;
-+
-+ unsigned int pkt_size, desc_count, tcp_qid;
-+ volatile unsigned int toeq_wptr;
-+ struct toe_conn* connection;
-+ int i, frag_id = 0;
-+ // unsigned long toeq_flags;
-+ struct jumbo_frame jumbo_skb;
-+ struct sk_buff *skb;
-+ __u32 interrupt_status;
-+
-+ in_toe_isr++;
-+
-+ interrupt_status = status >> 24;
-+ // get interrupt queue header
-+ intr_qhdr = (volatile NONTOE_QHDR_T*)TOE_INTR_Q_HDR_BASE;
-+ memset(&jumbo_skb, 0, sizeof(struct jumbo_frame));
-+
-+ for (i=0; i<TOE_INTR_QUEUE_NUM; i++, intr_qhdr++) {
-+ if (!(interrupt_status & 0x0001)) {
-+ // no interrupt of this IntQ
-+ interrupt_status = interrupt_status >> 1;
-+ continue;
-+ }
-+ interrupt_status = interrupt_status >> 1;
-+ intr_rwptr.bits32 = readl(&intr_qhdr->word1);
-+
-+ while ( intr_rwptr.bits.rptr != intr_rwptr.bits.wptr) {
-+ int max_pktsize = 1;
-+ // get interrupt queue descriptor.
-+ intr_curr_desc = (INTR_QHDR_T*)toe->intr_desc_base +
-+ i* TOE_INTR_DESC_NUM + intr_rwptr.bits.rptr;
-+// printk("%s::int %x\n", __func__, intr_curr_desc->word1.bits32);
-+ // get toeq id
-+ tcp_qid = (u8)intr_curr_desc->word1.bits.tcp_qid - (u8)TOE_TOE_QID(0);
-+ // get toeq queue header
-+ toe_qhdr = (volatile TOE_QHDR_T*) TOE_TOE_QUE_HDR_BASE;
-+ toe_qhdr += tcp_qid;
-+ connection = &toe_connections[tcp_qid];
-+ del_timer(&connection->rx_timer);
-+ // Gary Chen spin_lock_irqsave(&connection->conn_lock, toeq_flags);
-+ // handling interrupts of this TOE Q.
-+ if (intr_curr_desc->word1.bits.ctl || intr_curr_desc->word1.bits.osq ||
-+ intr_curr_desc->word1.bits.abn)
-+ max_pktsize = 0;
-+ if (!max_pktsize || intr_curr_desc->word1.bits.TotalPktSize) {
-+ desc_count=0;
-+ // wptr in intl queue is where this TOE interrupt should stop.
-+ toeq_rwptr.bits32 = readl(&toe_qhdr->word1);
-+ toeq_wptr = intr_curr_desc->word0.bits.wptr;
-+ if (connection->toeq_rwptr.bits.rptr != toeq_rwptr.bits.rptr)
-+ printk("conn rptr %d, hw rptr %d\n",
-+ connection->toeq_rwptr.bits.rptr, toeq_rwptr.bits.rptr);
-+
-+ if (intr_curr_desc->word1.bits.ctl &&
-+ (toeq_rwptr.bits.rptr == toeq_wptr)) {
-+ printk("\nctrl frame, but not in TOE queue! conn rptr %d, hw wptr %d\n",
-+ connection->toeq_rwptr.bits.rptr, toeq_wptr);
-+// dump_toe_qhdr(toe_qhdr);
-+// dump_intrq_desc(intr_curr_desc);
-+ }
-+ // while (toeq_rwptr.bits.rptr != intr_curr_desc->word0.bits.wptr) {
-+ while (toe_qhdr->word1.bits.rptr != intr_curr_desc->word0.bits.wptr) {
-+ frag_id++;
-+ toe_curr_desc = (volatile GMAC_RXDESC_T *)(toe->toe_desc_base[tcp_qid]
-+ + toe_qhdr->word1.bits.rptr *sizeof(GMAC_RXDESC_T));
-+ connection->curr_desc = (GMAC_RXDESC_T *)toe_curr_desc;
-+ desc_count = toe_curr_desc->word0.bits.desc_count;
-+ pkt_size = toe_curr_desc->word1.bits.byte_count;
-+ consistent_sync((void*)__va(toe_curr_desc->word2.buf_adr), pkt_size,
-+ PCI_DMA_FROMDEVICE);
-+ skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr)-
-+ SKB_RESERVE_BYTES));
-+ _debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x01);
-+ connection->curr_rx_skb = skb;
-+ skb_reserve(skb, RX_INSERT_BYTES);
-+ if ((skb->len + pkt_size) > (1514+16))
-+ {
-+ printk("skb->len=%d, pkt_size=%d\n",skb->len, pkt_size);
-+ while(1);
-+ }
-+
-+ skb_put(skb, pkt_size);
-+ skb->dev = dev;
-+ skb->protocol = eth_type_trans(skb, dev);
-+ skb->ip_summed = CHECKSUM_UNNECESSARY;
-+
-+ if (toe_curr_desc->word3.bits32 & 0x1b000000)
-+ dump_jumbo_skb(&jumbo_skb);
-+
-+ rx_append_skb(&jumbo_skb, skb, pkt_size-toe_curr_desc->word3.bits.l7_offset);
-+// spin_lock_irqsave(&gmac_fq_lock, flags);
-+ toeq_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(toeq_rwptr.bits.rptr, TOE_TOE_DESC_NUM);
-+ SET_RPTR(&toe_qhdr->word1, toeq_rwptr.bits.rptr);
-+// spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+ if (storlink_ctl.fqint_threshold)
-+ continue;
-+#if 0
-+//#if (HANDLE_FREEQ_METHOD == HANDLE_FREEQ_INDIVIDUAL)
-+ if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
-+ printk("%s::toe queue alloc buffer ", __func__);
-+ }
-+ *(unsigned int*)(skb->data) = (unsigned int)skb;
-+ connection->curr_rx_skb = skb;
-+ skb_reserve(skb, SKB_RESERVE_BYTES);
-+
-+ spin_lock_irqsave(&gmac_fq_lock, flags);
-+ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+ if (toe->fq_rx_rwptr.bits.wptr != fq_rwptr.bits.wptr) {
-+ printk("%s::fq_rx_rwptr %x\n", __func__, toe->fq_rx_rwptr.bits32);
-+ mac_stop_txdma((struct net_device*) tp->dev);
-+ spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+ while(1);
-+ }
-+ fq_desc = (GMAC_RXDESC_T*)toe->swfq_desc_base + fq_rwptr.bits.wptr;
-+ fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
-+
-+ fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM);
-+ SET_WPTR(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
-+ toe->fq_rx_rwptr.bits32 = fq_rwptr.bits32;
-+ spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+#endif
-+ } // end of this multi-desc.
-+ dump_jumbo_skb(&jumbo_skb);
-+ dev->last_rx = jiffies;
-+ connection->toeq_rwptr.bits32 = toeq_rwptr.bits32;
-+ } else if (intr_curr_desc->word1.bits.sat) {
-+ toeq_rwptr.bits32 = readl(&toe_qhdr->word1);
-+ toeq_wptr = intr_curr_desc->word0.bits.wptr;
-+ if (connection->toeq_rwptr.bits.rptr != toeq_rwptr.bits.rptr)
-+ printk("SAT. conn rptr %d, hw rptr %d\n",
-+ connection->toeq_rwptr.bits.rptr, toeq_rwptr.bits.rptr);
-+/*
-+ printk("%s::SAT int!, ackcnt %x, seqcnt %x, rptr %d, wptr %d, ack %x, qhack %x\n",
-+ __func__, intr_curr_desc->word4.bits.AckCnt, intr_curr_desc->word4.bits.SeqCnt,
-+ toeq_rptr, toeq_wptr, intr_curr_desc->word3.ack_num, toe_qhdr->word4.ack_num);*/
-+ /* pure ack */
-+ if (toeq_rwptr.bits.rptr == toeq_wptr) {
-+ if (intr_curr_desc->word4.bits32) {
-+ skb = gen_pure_ack(connection, (TOE_QHDR_T *)toe_qhdr, (INTR_QHDR_T *)intr_curr_desc);
-+ skb_put(skb, 60);
-+ skb->dev = connection->dev;
-+ skb->ip_summed = CHECKSUM_UNNECESSARY;
-+ skb->protocol = eth_type_trans(skb, connection->dev);
-+ netif_rx(skb);
-+ } else
-+ printk("%s::SAT Interrupt!. But cnt is 0!\n", __func__);
-+ } else {
-+ // while (toeq_rwptr.bits.rptr != toeq_wptr) {
-+ while (toe_qhdr->word1.bits.rptr != intr_curr_desc->word0.bits.wptr) {
-+ toe_curr_desc = (volatile GMAC_RXDESC_T*)(toe->toe_desc_base[tcp_qid]
-+ + toe_qhdr->word1.bits.rptr * sizeof(GMAC_RXDESC_T));
-+ connection->curr_desc = (GMAC_RXDESC_T *)toe_curr_desc;
-+ desc_count = toe_curr_desc->word0.bits.desc_count;
-+ pkt_size = toe_curr_desc->word1.bits.byte_count;
-+ consistent_sync((void*)__va(toe_curr_desc->word2.buf_adr), pkt_size,
-+ PCI_DMA_FROMDEVICE);
-+ // if ( ((toeq_rwptr.bits.rptr +1)&(TOE_TOE_DESC_NUM-1)) == toeq_wptr) {
-+ if ( RWPTR_ADVANCE_ONE(toe_qhdr->word1.bits.rptr, TOE_TOE_DESC_NUM) == toeq_wptr) {
-+ skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr) -
-+ SKB_RESERVE_BYTES));
-+ _debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x04);
-+ connection->curr_rx_skb = skb;
-+ skb_reserve(skb, RX_INSERT_BYTES);
-+ skb_put(skb, pkt_size);
-+ skb->dev = dev;
-+ skb->protocol = eth_type_trans(skb, dev);
-+ skb->ip_summed = CHECKSUM_UNNECESSARY;
-+ // printk("toeq_rptr %d, wptr %d\n", toeq_rptr, toeq_wptr);
-+ netif_rx(skb);
-+ dev->last_rx = jiffies;
-+/*
-+ if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
-+
-+ }
-+ *(unsigned int*)(skb->data) = (unsigned int) skb;
-+ skb_reserve(skb, SKB_RESERVE_BYTES); */
-+ } else {
-+ // reuse this skb, append to free queue..
-+ skb = (struct sk_buff*)(REG32(__va(toe_curr_desc->word2.buf_adr)-
-+ SKB_RESERVE_BYTES));
-+ _debug_skb(skb, (GMAC_RXDESC_T *)toe_curr_desc, 0x05);
-+ connection->curr_rx_skb = skb;
-+ dev_kfree_skb_irq(skb);
-+ }
-+#if 0
-+ spin_lock_irqsave(&gmac_fq_lock, flags);
-+ fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+/* if (toe->fq_rx_rwptr.bits.wptr != fq_rwptr.bits.wptr) {
-+ printk("%s::fq_rx_rwptr %x\n", __func__, toe->fq_rx_rwptr.bits32);
-+ mac_stop_txdma((struct net_device*) tp->dev);
-+ spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+ while(1);
-+ } */
-+ fq_desc = (GMAC_RXDESC_T*)toe->swfq_desc_base + fq_rwptr.bits.wptr;
-+ fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
-+
-+ fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr, TOE_SW_FREEQ_DESC_NUM);
-+ SET_WPTR(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
-+ toe->fq_rx_rwptr.bits32 = fq_rwptr.bits32;
-+ // spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+#endif
-+// spin_lock_irqsave(&gmac_fq_lock, flags);
-+ toeq_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(toeq_rwptr.bits.rptr, TOE_TOE_DESC_NUM);
-+ SET_RPTR(&toe_qhdr->word1, toeq_rwptr.bits.rptr);
-+// spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+ }
-+ } // end of ACK with options.
-+ connection->toeq_rwptr.bits32 = toeq_rwptr.bits32;
-+ // Gary Chen spin_unlock_irqrestore(&connection->conn_lock, toeq_flags);
-+// }
-+ };
-+ update_timer(connection);
-+ // any protection against interrupt queue header?
-+ intr_rwptr.bits.rptr = RWPTR_ADVANCE_ONE(intr_rwptr.bits.rptr, TOE_INTR_DESC_NUM);
-+ SET_RPTR(&intr_qhdr->word1, intr_rwptr.bits.rptr);
-+ intr_rwptr.bits32 = readl(&intr_qhdr->word1);
-+ toe_gmac_fill_free_q();
-+ } // end of this interrupt Queue processing.
-+ } // end of all interrupt Queues.
-+
-+ in_toe_isr = 0;
-+}
-+
-+
---- /dev/null
-+++ b/drivers/net/sl_lepus_hash.c
-@@ -0,0 +1,553 @@
-+/**************************************************************************
-+* Copyright 2006 StorLink Semiconductors, Inc. All rights reserved.
-+*--------------------------------------------------------------------------
-+* Name : sl_lepus_hash.c
-+* Description :
-+* Handle Storlink Lepus Hash Functions
-+*
-+* History
-+*
-+* Date Writer Description
-+*----------------------------------------------------------------------------
-+* 03/13/2006 Gary Chen Create and implement
-+*
-+****************************************************************************/
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/compiler.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/ioport.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/rtnetlink.h>
-+#include <linux/delay.h>
-+#include <linux/ethtool.h>
-+#include <linux/mii.h>
-+#include <linux/completion.h>
-+#include <asm/hardware.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/semaphore.h>
-+#include <asm/arch/irqs.h>
-+#include <asm/arch/it8712.h>
-+#include <linux/mtd/kvctl.h>
-+#include <linux/skbuff.h>
-+#include <linux/ip.h>
-+#include <linux/tcp.h>
-+#include <linux/list.h>
-+#define MIDWAY
-+#define SL_LEPUS
-+
-+#include <asm/arch/sl2312.h>
-+#include <asm/arch/sl_lepus_gmac.h>
-+#include <asm/arch/sl_hash_cfg.h>
-+
-+#ifndef RXTOE_DEBUG
-+#define RXTOE_DEBUG
-+#endif
-+#undef RXTOE_DEBUG
-+
-+/*----------------------------------------------------------------------
-+* Definition
-+*----------------------------------------------------------------------*/
-+#define hash_printf printk
-+
-+#define HASH_TIMER_PERIOD (60*HZ) // seconds
-+#define HASH_ILLEGAL_INDEX 0xffff
-+
-+/*----------------------------------------------------------------------
-+* Variables
-+*----------------------------------------------------------------------*/
-+u32 hash_activate_bits[HASH_TOTAL_ENTRIES/32];
-+u32 hash_nat_owner_bits[HASH_TOTAL_ENTRIES/32];
-+char hash_tables[HASH_TOTAL_ENTRIES][HASH_MAX_BYTES] __attribute__ ((aligned(16)));
-+static struct timer_list hash_timer_obj;
-+LIST_HEAD(hash_timeout_list);
-+
-+/*----------------------------------------------------------------------
-+* Functions
-+*----------------------------------------------------------------------*/
-+void dm_long(u32 location, int length);
-+static void hash_timer_func(u32 data);
-+
-+/*----------------------------------------------------------------------
-+* hash_init
-+*----------------------------------------------------------------------*/
-+void hash_init(void)
-+{
-+ int i;
-+ volatile u32 *dp1, *dp2, dword;
-+
-+ dp1 = (volatile u32 *) TOE_V_BIT_BASE;
-+ dp2 = (volatile u32 *) TOE_A_BIT_BASE;
-+
-+ for (i=0; i<HASH_TOTAL_ENTRIES/32; i++)
-+ {
-+ *dp1++ = 0;
-+ dword = *dp2++; // read-clear
-+ }
-+ memset((void *)&hash_nat_owner_bits, 0, sizeof(hash_nat_owner_bits));
-+ memset((void *)&hash_tables, 0, sizeof(hash_tables));
-+
-+ init_timer(&hash_timer_obj);
-+ hash_timer_obj.expires = jiffies + HASH_TIMER_PERIOD;
-+ hash_timer_obj.data = (unsigned long)&hash_timer_obj;
-+ hash_timer_obj.function = (void *)&hash_timer_func;
-+ add_timer(&hash_timer_obj);
-+
-+#if (HASH_MAX_BYTES == 128)
-+ writel((unsigned long)__pa(&hash_tables) | 3, // 32 words
-+ TOE_GLOBAL_BASE + GLOBAL_HASH_TABLE_BASE_REG);
-+#elif (HASH_MAX_BYTES == 64)
-+ writel((unsigned long)__pa(&hash_tables) | 2, // 16 words
-+ TOE_GLOBAL_BASE + GLOBAL_HASH_TABLE_BASE_REG);
-+#else
-+ #error Incorrect setting for HASH_MAX_BYTES
-+#endif
-+
-+}
-+/*----------------------------------------------------------------------
-+* hash_add_entry
-+*----------------------------------------------------------------------*/
-+int hash_add_entry(HASH_ENTRY_T *entry)
-+{
-+ int rc;
-+ u32 key[HASH_MAX_DWORDS];
-+ rc = hash_build_keys((u32 *)&key, entry);
-+ if (rc < 0)
-+ return -1;
-+ hash_write_entry(entry, (unsigned char*) &key[0]);
-+// hash_set_valid_flag(entry->index, 1);
-+// printk("Dump hash key!\n");
-+// dump_hash_key(entry);
-+ return entry->index;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_set_valid_flag
-+*----------------------------------------------------------------------*/
-+void hash_set_valid_flag(int index, int valid)
-+{
-+ register u32 reg32;
-+
-+ reg32 = TOE_V_BIT_BASE + (index/32) * 4;
-+
-+ if (valid)
-+ {
-+ writel(readl(reg32) | (1 << (index%32)), reg32);
-+ }
-+ else
-+ {
-+ writel(readl(reg32) & ~(1 << (index%32)), reg32);
-+ }
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_set_nat_owner_flag
-+*----------------------------------------------------------------------*/
-+void hash_set_nat_owner_flag(int index, int valid)
-+{
-+ if (valid)
-+ {
-+ hash_nat_owner_bits[index/32] |= (1 << (index % 32));
-+ }
-+ else
-+ {
-+ hash_nat_owner_bits[index/32] &= ~(1 << (index % 32));
-+ }
-+}
-+
-+
-+/*----------------------------------------------------------------------
-+* hash_build_keys
-+*----------------------------------------------------------------------*/
-+int hash_build_keys(u32 *destp, HASH_ENTRY_T *entry)
-+{
-+ u32 data;
-+ unsigned char *cp;
-+ int i, j;
-+ unsigned short index;
-+ int total;
-+
-+ memset((void *)destp, 0, HASH_MAX_BYTES);
-+ cp = (unsigned char *)destp;
-+
-+ if (entry->key_present.port || entry->key_present.Ethertype)
-+ {
-+ HASH_PUSH_WORD(cp, entry->key.Ethertype); // word 0
-+ HASH_PUSH_BYTE(cp, entry->key.port); // Byte 2
-+ HASH_PUSH_BYTE(cp, 0); // Byte 3
-+ }
-+ else
-+ {
-+ HASH_PUSH_DWORD(cp, 0);
-+ }
-+
-+ if (entry->key_present.da || entry->key_present.sa)
-+ {
-+ unsigned char mac[4];
-+ if (entry->key_present.da)
-+ {
-+ for (i=0; i<4; i++)
-+ HASH_PUSH_BYTE(cp, entry->key.da[i]);
-+ }
-+ mac[0] = (entry->key_present.da) ? entry->key.da[4] : 0;
-+ mac[1] = (entry->key_present.da) ? entry->key.da[5] : 0;
-+ mac[2] = (entry->key_present.sa) ? entry->key.sa[0] : 0;
-+ mac[3] = (entry->key_present.sa) ? entry->key.sa[1] : 0;
-+ data = mac[0] + (mac[1]<<8) + (mac[2]<<16) + (mac[3]<<24);
-+ HASH_PUSH_DWORD(cp, data);
-+ if (entry->key_present.sa)
-+ {
-+ for (i=2; i<6; i++)
-+ HASH_PUSH_BYTE(cp, entry->key.sa[i]);
-+ }
-+ }
-+
-+ if (entry->key_present.pppoe_sid || entry->key_present.vlan_id)
-+ {
-+ HASH_PUSH_WORD(cp, entry->key.vlan_id); // low word
-+ HASH_PUSH_WORD(cp, entry->key.pppoe_sid); // high word
-+ }
-+ if (entry->key_present.ipv4_hdrlen || entry->key_present.ip_tos || entry->key_present.ip_protocol)
-+ {
-+ HASH_PUSH_BYTE(cp, entry->key.ip_protocol); // Byte 0
-+ HASH_PUSH_BYTE(cp, entry->key.ip_tos); // Byte 1
-+ HASH_PUSH_BYTE(cp, entry->key.ipv4_hdrlen); // Byte 2
-+ HASH_PUSH_BYTE(cp, 0); // Byte 3
-+ }
-+
-+ if (entry->key_present.ipv6_flow_label)
-+ {
-+ HASH_PUSH_DWORD(cp, entry->key.ipv6_flow_label); // low word
-+ }
-+ if (entry->key_present.sip)
-+ {
-+ // input (entry->key.sip[i]) is network-oriented
-+ // output (hash key) is host-oriented
-+ for (i=3; i>=0; i--)
-+ HASH_PUSH_BYTE(cp, entry->key.sip[i]);
-+ if (entry->key.ipv6)
-+ {
-+ for (i=4; i<16; i+=4)
-+ {
-+ for (j=i+3; j>=i; j--)
-+ HASH_PUSH_BYTE(cp, entry->key.sip[j]);
-+ }
-+ }
-+ }
-+ if (entry->key_present.dip)
-+ {
-+ // input (entry->key.sip[i]) is network-oriented
-+ // output (hash key) is host-oriented
-+ for (i=3; i>=0; i--)
-+ HASH_PUSH_BYTE(cp, entry->key.dip[i]);
-+ if (entry->key.ipv6)
-+ {
-+ for (i=4; i<16; i+=4)
-+ {
-+ for (j=i+3; j>=i; j--)
-+ HASH_PUSH_BYTE(cp, entry->key.dip[j]);
-+ }
-+ }
-+ }
-+
-+ if (entry->key_present.l4_bytes_0_3)
-+ {
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[0]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[1]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[2]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[3]);
-+ }
-+ if (entry->key_present.l4_bytes_4_7)
-+ {
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[4]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[5]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[6]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[7]);
-+ }
-+ if (entry->key_present.l4_bytes_8_11)
-+ {
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[8]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[9]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[10]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[11]);
-+ }
-+ if (entry->key_present.l4_bytes_12_15)
-+ {
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[12]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[13]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[14]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[15]);
-+ }
-+ if (entry->key_present.l4_bytes_16_19)
-+ {
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[16]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[17]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[18]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[19]);
-+ }
-+ if (entry->key_present.l4_bytes_20_23)
-+ {
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[20]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[21]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[22]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[23]);
-+ }
-+ if (entry->key_present.l7_bytes_0_3)
-+ {
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[0]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[1]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[2]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[3]);
-+ }
-+ if (entry->key_present.l7_bytes_4_7)
-+ {
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[4]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[5]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[6]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[7]);
-+ }
-+ if (entry->key_present.l7_bytes_8_11)
-+ {
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[8]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[9]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[10]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[11]);
-+ }
-+ if (entry->key_present.l7_bytes_12_15)
-+ {
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[12]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[13]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[14]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[15]);
-+ }
-+ if (entry->key_present.l7_bytes_16_19)
-+ {
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[16]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[17]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[18]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[19]);
-+ }
-+ if (entry->key_present.l7_bytes_20_23)
-+ {
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[20]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[21]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[22]);
-+ HASH_PUSH_BYTE(cp, entry->key.l7_bytes[23]);
-+ }
-+
-+ // get hash index
-+ total = (u32)((u32)cp - (u32)destp) / (sizeof(u32));
-+
-+ if (total > HASH_MAX_KEY_DWORD)
-+ {
-+ //hash_printf("Total key words (%d) is too large (> %d)!\n",
-+ // total, HASH_MAX_KEY_DWORD);
-+ return -1;
-+ }
-+
-+ if (entry->key_present.port || entry->key_present.Ethertype)
-+ index = hash_gen_crc16((unsigned char *)destp, total * 4);
-+ else
-+ {
-+ if (total == 1)
-+ {
-+ hash_printf("No key is assigned!\n");
-+ return -1;
-+ }
-+
-+ index = hash_gen_crc16((unsigned char *)(destp+1), (total-1) * 4);
-+ }
-+
-+ entry->index = index & HASH_BITS_MASK;
-+
-+ //hash_printf("Total key words = %d, Hash Index= %d\n",
-+ // total, entry->index);
-+
-+ cp = (unsigned char *)destp;
-+ cp+=3;
-+ HASH_PUSH_BYTE(cp, entry->rule); // rule
-+
-+ entry->total_dwords = total;
-+
-+ return total;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_build_nat_keys
-+*----------------------------------------------------------------------*/
-+void hash_build_nat_keys(u32 *destp, HASH_ENTRY_T *entry)
-+{
-+ unsigned char *cp;
-+ int i;
-+ unsigned short index;
-+ int total;
-+
-+ memset((void *)destp, 0, HASH_MAX_BYTES);
-+
-+ cp = (unsigned char *)destp + 2;
-+ HASH_PUSH_BYTE(cp, entry->key.port);
-+ cp++;
-+
-+ if (entry->key_present.pppoe_sid || entry->key_present.vlan_id)
-+ {
-+ HASH_PUSH_WORD(cp, entry->key.vlan_id); // low word
-+ HASH_PUSH_WORD(cp, entry->key.pppoe_sid); // high word
-+ }
-+
-+ HASH_PUSH_BYTE(cp, entry->key.ip_protocol);
-+ cp+=3;
-+
-+ // input (entry->key.sip[i]) is network-oriented
-+ // output (hash key) is host-oriented
-+ for (i=3; i>=0; i--)
-+ HASH_PUSH_BYTE(cp, entry->key.sip[i]);
-+
-+ // input (entry->key.sip[i]) is network-oriented
-+ // output (hash key) is host-oriented
-+ for (i=3; i>=0; i--)
-+ HASH_PUSH_BYTE(cp, entry->key.dip[i]);
-+
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[0]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[1]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[2]);
-+ HASH_PUSH_BYTE(cp, entry->key.l4_bytes[3]);
-+
-+ // get hash index
-+ total = (u32)((u32)cp - (u32)destp) / (sizeof(u32));
-+
-+ index = hash_gen_crc16((unsigned char *)destp, total * 4);
-+ entry->index = index & ((1 << HASH_BITS) - 1);
-+
-+ cp = (unsigned char *)destp;
-+ cp+=3;
-+ HASH_PUSH_BYTE(cp, entry->rule); // rule
-+
-+ entry->total_dwords = total;
-+}
-+
-+
-+/*----------------------------------------------------------------------
-+* hash_write_entry
-+*----------------------------------------------------------------------*/
-+int hash_write_entry(HASH_ENTRY_T *entry, unsigned char *key)
-+{
-+ int i;
-+ u32 *srcep, *destp, *destp2;
-+
-+ srcep = (u32 *)key;
-+ destp2 = destp = (u32 *)&hash_tables[entry->index][0];
-+
-+ for (i=0; i<(entry->total_dwords); i++, srcep++, destp++)
-+ *destp = *srcep;
-+
-+ srcep = (u32 *)&entry->action;
-+ *destp++ = *srcep;
-+
-+ srcep = (u32 *)&entry->param;
-+ for (i=0; i<(sizeof(ENTRY_PARAM_T)/sizeof(*destp)); i++, srcep++, destp++)
-+ *destp = *srcep;
-+
-+ memset(destp, 0, (HASH_MAX_DWORDS-entry->total_dwords-HASH_ACTION_DWORDS) * sizeof(u32));
-+
-+ consistent_sync(destp2, (entry->total_dwords+HASH_ACTION_DWORDS) * 4, PCI_DMA_TODEVICE);
-+ return 0;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_timer_func
-+*----------------------------------------------------------------------*/
-+static void hash_timer_func(u32 data)
-+{
-+ int i, j;
-+ volatile u32 *active_p, *own_p, *valid_p;
-+ u32 a_bits, own_bits;
-+
-+ valid_p = (volatile u32 *)TOE_V_BIT_BASE;
-+ active_p = (volatile u32 *)hash_activate_bits;
-+ own_p = (volatile u32 *)hash_nat_owner_bits;
-+ for (i=0; i<(HASH_TOTAL_ENTRIES/32); i++, own_p++, active_p++, valid_p++)
-+ {
-+ *active_p |= readl(TOE_A_BIT_BASE + (i*4));
-+ a_bits = *active_p;
-+ own_bits = *own_p;
-+ if (own_bits)
-+ {
-+#ifndef DEBUG_NAT_MIXED_HW_SW_TX
-+ a_bits = own_bits & ~a_bits;
-+#else
-+ a_bits = own_bits & a_bits;
-+#endif
-+ for (j=0; a_bits && j<32; j++)
-+ {
-+ if (a_bits & 1)
-+ {
-+ *valid_p &= ~(1 << j); // invalidate it
-+#if !(defined(NAT_DEBUG_LAN_HASH_TIMEOUT) || defined(NAT_DEBUG_WAN_HASH_TIMEOUT))
-+ *own_p &= ~(1 << j); // release ownership for NAT
-+#endif
-+// #ifdef DEBUG_NAT_MIXED_HW_SW_TX
-+#if 0
-+ hash_printf("%lu %s: Clear hash index: %d\n", jiffies/HZ, __func__, i*32+j);
-+#endif
-+ }
-+ a_bits >>= 1;
-+ }
-+ *active_p &= ~own_bits; // deactivate it for next polling
-+ }
-+ }
-+
-+ hash_timer_obj.expires = jiffies + HASH_TIMER_PERIOD;
-+ add_timer((struct timer_list *)data);
-+}
-+
-+/*----------------------------------------------------------------------
-+* dm_long
-+*----------------------------------------------------------------------*/
-+void dm_long(u32 location, int length)
-+{
-+ u32 *start_p, *curr_p, *end_p;
-+ u32 *datap, data;
-+ int i;
-+
-+ //if (length > 1024)
-+ // length = 1024;
-+
-+ start_p = (u32 *)location;
-+ end_p = (u32 *)location + length;
-+ curr_p = (u32 *)((u32)location & 0xfffffff0);
-+ datap = (u32 *)location;
-+ while (curr_p < end_p)
-+ {
-+ hash_printf("0x%08x: ",(u32)curr_p & 0xfffffff0);
-+ for (i=0; i<4; i++)
-+ {
-+ if (curr_p < start_p || curr_p >= end_p)
-+ hash_printf(" ");
-+ else
-+ {
-+ data = *datap;
-+ hash_printf("%08X ", data);
-+ }
-+ if (i==1)
-+ hash_printf("- ");
-+
-+ curr_p++;
-+ datap++;
-+ }
-+ hash_printf("\n");
-+ }
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_dump_entry
-+*----------------------------------------------------------------------*/
-+void hash_dump_entry(int index)
-+{
-+ hash_printf("Hash Index %d:\n", index);
-+ dm_long((u32)&hash_tables[index][0], HASH_MAX_DWORDS);
-+}
-+
-+
---- /dev/null
-+++ b/drivers/net/sl_switch.c
-@@ -0,0 +1,650 @@
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/ioport.h>
-+#include <linux/delay.h>
-+#include <asm/hardware.h>
-+#include <asm/io.h>
-+
-+#define GMAC_GLOBAL_BASE_ADDR (IO_ADDRESS(SL2312_GLOBAL_BASE))
-+#define GPIO_BASE_ADDR1 (IO_ADDRESS(SL2312_GPIO_BASE1))
-+enum GPIO_REG
-+{
-+ GPIO_DATA_OUT = 0x00,
-+ GPIO_DATA_IN = 0x04,
-+ GPIO_PIN_DIR = 0x08,
-+ GPIO_BY_PASS = 0x0c,
-+ GPIO_DATA_SET = 0x10,
-+ GPIO_DATA_CLEAR = 0x14,
-+};
-+
-+#define GMAC_SPEED_10 0
-+#define GMAC_SPEED_100 1
-+#define GMAC_SPEED_1000 2
-+
-+enum phy_state
-+{
-+ LINK_DOWN = 0,
-+ LINK_UP = 1
-+};
-+
-+#ifndef BIT
-+#define BIT(x) (1 << (x))
-+#endif
-+
-+//int Get_Set_port_status();
-+unsigned int SPI_read_bit(void);
-+void SPI_write_bit(char bit_EEDO);
-+void SPI_write(unsigned char block,unsigned char subblock,unsigned char addr,unsigned int value);
-+unsigned int SPI_read(unsigned char block,unsigned char subblock,unsigned char addr);
-+int SPI_default(void);
-+void SPI_CS_enable(unsigned char enable);
-+unsigned int SPI_get_identifier(void);
-+void phy_write(unsigned char port_no,unsigned char reg,unsigned int val);
-+unsigned int phy_read(unsigned char port_no,unsigned char reg);
-+void phy_write_masked(unsigned char port_no,unsigned char reg,unsigned int val,unsigned int mask);
-+void init_seq_7385(unsigned char port_no) ;
-+void phy_receiver_init (unsigned char port_no);
-+
-+#define PORT_NO 4
-+int switch_pre_speed[PORT_NO]={0,0,0,0};
-+int switch_pre_link[PORT_NO]={0,0,0,0};
-+
-+
-+
-+
-+
-+/* NOTES
-+ * The Protocol of the SPI are as follows:
-+ *
-+ * Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
-+ * byte0 | Block id | r/w | sub-block |
-+ * byte1 | Address |
-+ * byte2 | Data |
-+ * byte3 | Data |
-+ * byte4 | Data |
-+ * byte5 | Data |
-+ */
-+
-+
-+
-+
-+/***************************************/
-+/* define GPIO module base address */
-+/***************************************/
-+#define GPIO_EECS 0x80000000 /* EECS: GPIO[22] */
-+#define GPIO_MOSI 0x20000000 /* EEDO: GPIO[29] send to 6996*/
-+#define GPIO_MISO 0x40000000 /* EEDI: GPIO[30] receive from 6996*/
-+#define GPIO_EECK 0x10000000 /* EECK: GPIO[31] */
-+
-+/*************************************************************
-+* SPI protocol for ADM6996 control
-+**************************************************************/
-+#define SPI_OP_LEN 0x08 // the length of start bit and opcode
-+#define SPI_OPWRITE 0X05 // write
-+#define SPI_OPREAD 0X06 // read
-+#define SPI_OPERASE 0X07 // erase
-+#define SPI_OPWTEN 0X04 // write enable
-+#define SPI_OPWTDIS 0X04 // write disable
-+#define SPI_OPERSALL 0X04 // erase all
-+#define SPI_OPWTALL 0X04 // write all
-+
-+#define SPI_ADD_LEN 8 // bits of Address
-+#define SPI_DAT_LEN 32 // bits of Data
-+
-+
-+/****************************************/
-+/* Function Declare */
-+/****************************************/
-+
-+//unsigned int SPI_read_bit(void);
-+//void SPI_write_bit(char bit_EEDO);
-+//unsigned int SPI_read_bit(void);
-+/******************************************
-+* SPI_write
-+* addr -> Write Address
-+* value -> value to be write
-+***************************************** */
-+void phy_receiver_init (unsigned char port_no)
-+{
-+ phy_write(port_no,31,0x2a30);
-+ phy_write_masked(port_no, 12, 0x0200, 0x0300);
-+ phy_write(port_no,31,0);
-+}
-+
-+void phy_write(unsigned char port_no,unsigned char reg,unsigned int val)
-+{
-+ unsigned int cmd;
-+
-+ cmd = (port_no<<21)|(reg<<16)|val;
-+ SPI_write(3,0,1,cmd);
-+}
-+
-+unsigned int phy_read(unsigned char port_no,unsigned char reg)
-+{
-+ unsigned int cmd,reg_val;
-+
-+ cmd = BIT(26)|(port_no<<21)|(reg<<16);
-+ SPI_write(3,0,1,cmd);
-+ msleep(2);
-+ reg_val = SPI_read(3,0,2);
-+ return reg_val;
-+}
-+
-+void phy_write_masked(unsigned char port_no,unsigned char reg,unsigned int val,unsigned int mask)
-+{
-+ unsigned int cmd,reg_val;
-+
-+ cmd = BIT(26)|(port_no<<21)|(reg<<16); // Read reg_val
-+ SPI_write(3,0,1,cmd);
-+ mdelay(2);
-+ reg_val = SPI_read(3,0,2);
-+ reg_val &= ~mask; // Clear masked bit
-+ reg_val |= (val&mask) ; // set masked bit ,if true
-+ cmd = (port_no<<21)|(reg<<16)|reg_val;
-+ SPI_write(3,0,1,cmd);
-+}
-+
-+void init_seq_7385(unsigned char port_no)
-+{
-+ unsigned char rev;
-+
-+ phy_write(port_no, 31, 0x2a30);
-+ phy_write_masked(port_no, 8, 0x0200, 0x0200);
-+ phy_write(port_no, 31, 0x52b5);
-+ phy_write(port_no, 16, 0xb68a);
-+ phy_write_masked(port_no, 18, 0x0003, 0xff07);
-+ phy_write_masked(port_no, 17, 0x00a2, 0x00ff);
-+ phy_write(port_no, 16, 0x968a);
-+ phy_write(port_no, 31, 0x2a30);
-+ phy_write_masked(port_no, 8, 0x0000, 0x0200);
-+ phy_write(port_no, 31, 0x0000); /* Read revision */
-+ rev = phy_read(port_no, 3) & 0x000f;
-+ if (rev == 0)
-+ {
-+ phy_write(port_no, 31, 0x2a30);
-+ phy_write_masked(port_no, 8, 0x0200, 0x0200);
-+ phy_write(port_no, 31, 0x52b5);
-+ phy_write(port_no, 18, 0x0000);
-+ phy_write(port_no, 17, 0x0689);
-+ phy_write(port_no, 16, 0x8f92);
-+ phy_write(port_no, 31, 0x52B5);
-+ phy_write(port_no, 18, 0x0000);
-+ phy_write(port_no, 17, 0x0E35);
-+ phy_write(port_no, 16, 0x9786);
-+ phy_write(port_no, 31, 0x2a30);
-+ phy_write_masked(port_no, 8, 0x0000, 0x0200);
-+ phy_write(port_no, 23, 0xFF80);
-+ phy_write(port_no, 23, 0x0000);
-+ }
-+ phy_write(port_no, 31, 0x0000);
-+ phy_write(port_no, 18, 0x0048);
-+ if (rev == 0)
-+ {
-+ phy_write(port_no, 31, 0x2a30);
-+ phy_write(port_no, 20, 0x6600);
-+ phy_write(port_no, 31, 0x0000);
-+ phy_write(port_no, 24, 0xa24e);
-+ }
-+ else
-+ {
-+ phy_write(port_no, 31, 0x2a30);
-+ phy_write_masked(port_no, 22, 0x0240, 0x0fc0);
-+ phy_write_masked(port_no, 20, 0x4000, 0x6000);
-+ phy_write(port_no, 31, 1);
-+ phy_write_masked(port_no, 20, 0x6000, 0xe000);
-+ phy_write(port_no, 31, 0x0000);
-+ }
-+}
-+
-+int Get_Set_port_status()
-+{
-+ unsigned int reg_val,ability,rcv_mask,mac_config;
-+ int is_link=0;
-+ int i;
-+
-+ rcv_mask = SPI_read(2,0,0x10); // Receive mask
-+
-+ for(i=0;i<4;i++){
-+ reg_val = phy_read(i,1);
-+ if ((reg_val & 0x0024) == 0x0024) /* link is established and auto_negotiate process completed */
-+ {
-+ is_link=1;
-+ if(switch_pre_link[i]==LINK_DOWN){ // Link Down ==> Link up
-+
-+ rcv_mask |= BIT(i); // Enable receive
-+
-+ reg_val = phy_read(i,10);
-+ if(reg_val & 0x0c00){
-+ printk("Port%d:Giga mode\n",i);
-+// SPI_write(1,i,0x00,0x300701B1);
-+ mac_config = 0x00060004|(6<<6);
-+
-+ SPI_write(1,i,0x00,((mac_config & 0xfffffff8) | 1) | 0x20000030); // reset port
-+ mac_config |= (( BIT(i) << 19) | 0x08000000);
-+ SPI_write(1,i,0x00,mac_config);
-+ SPI_write(1,i,0x04,0x000300ff); // flow control
-+
-+ reg_val = SPI_read(5,0,0x12);
-+ reg_val &= ~BIT(i);
-+ SPI_write(5,0,0x12,reg_val);
-+
-+ reg_val = SPI_read(1,i,0x00);
-+ reg_val |= 0x10010000;
-+ SPI_write(1,i,0x00,reg_val);
-+// SPI_write(1,i,0x00,0x10070181);
-+ switch_pre_link[i]=LINK_UP;
-+ switch_pre_speed[i]=GMAC_SPEED_1000;
-+ }
-+ else{
-+ reg_val = phy_read(i,5);
-+ ability = (reg_val&0x5e0) >>5;
-+ if ((ability & 0x0C)) /* 100M */
-+ {
-+// SPI_write(1,i,0x00,0x30050472);
-+ if((ability&0x08)==0) // Half
-+ mac_config = 0x00040004 |(17<<6);
-+ else // Full
-+ mac_config = 0x00040004 |(17<<6);
-+
-+ SPI_write(1,i,0x00,((mac_config & 0xfffffff8) | 1) | 0x20000030); // reset port
-+ mac_config |= (( BIT(i) << 19) | 0x08000000);
-+ SPI_write(1,i,0x00,mac_config);
-+ SPI_write(1,i,0x04,0x000300ff); // flow control
-+
-+ reg_val = SPI_read(5,0,0x12);
-+ reg_val &= ~BIT(i);
-+ SPI_write(5,0,0x12,reg_val);
-+
-+ reg_val = SPI_read(1,i,0x00);
-+ reg_val &= ~0x08000000;
-+ reg_val |= 0x10010000;
-+ SPI_write(1,i,0x00,reg_val);
-+// SPI_write(1,i,0x00,0x10050442);
-+ printk("Port%d:100M\n",i);
-+ switch_pre_link[i]=LINK_UP;
-+ switch_pre_speed[i]=GMAC_SPEED_100;
-+ }
-+ else if((ability & 0x03)) /* 10M */
-+ {
-+// SPI_write(1,i,0x00,0x30050473);
-+ if((ability&0x2)==0) // Half
-+ mac_config = 0x00040004 |(17<<6);
-+ else // Full
-+ mac_config = 0x00040004 |(17<<6);
-+
-+ SPI_write(1,i,0x00,((mac_config & 0xfffffff8) | 1) | 0x20000030); // reset port
-+ mac_config |= (( BIT(i) << 19) | 0x08000000);
-+ SPI_write(1,i,0x00,mac_config);
-+ SPI_write(1,i,0x04,0x000300ff); // flow control
-+
-+ reg_val = SPI_read(5,0,0x12);
-+ reg_val &= ~BIT(i);
-+ SPI_write(5,0,0x12,reg_val);
-+
-+ reg_val = SPI_read(1,i,0x00);
-+ reg_val &= ~0x08000000;
-+ reg_val |= 0x10010000;
-+ SPI_write(1,i,0x00,reg_val);
-+// SPI_write(1,i,0x00,0x10050443);
-+ printk("Port%d:10M\n",i);
-+ switch_pre_link[i]=LINK_UP;
-+ switch_pre_speed[i]=GMAC_SPEED_10;
-+ }
-+ else{
-+ SPI_write(1,i,0x00,0x20000030);
-+ printk("Port%d:Unknown mode\n",i);
-+ switch_pre_link[i]=LINK_DOWN;
-+ switch_pre_speed[i]=GMAC_SPEED_10;
-+ }
-+ }
-+ }
-+ else{ // Link up ==> Link UP
-+
-+ }
-+ }
-+ else{ // Link Down
-+ if(switch_pre_link[i]==LINK_UP){
-+ printk("Port%d:Link Down\n",i);
-+ //phy_receiver_init(i);
-+ reg_val = SPI_read(1,i,0);
-+ reg_val &= ~BIT(16);
-+ SPI_write(1,i,0x00,reg_val); // disable RX
-+ SPI_write(5,0,0x0E,BIT(i)); // dicard packet
-+ while((SPI_read(5,0,0x0C)&BIT(i))==0) // wait to be empty
-+ msleep(1);
-+ SPI_write(1,i,0x00,0x20000030); // PORT_RST
-+ SPI_write(5,0,0x0E,SPI_read(5,0,0x0E) & ~BIT(i));// accept packet
-+
-+ reg_val = SPI_read(5,0,0x12);
-+ reg_val |= BIT(i);
-+ SPI_write(5,0,0x12,reg_val);
-+ }
-+ switch_pre_link[i]=LINK_DOWN;
-+ rcv_mask &= ~BIT(i); // disable receive
-+ }
-+ }
-+
-+ SPI_write(2,0,0x10,rcv_mask); // Receive mask
-+ return is_link;
-+
-+}
-+EXPORT_SYMBOL(Get_Set_port_status);
-+
-+void SPI_write(unsigned char block,unsigned char subblock,unsigned char addr,unsigned int value)
-+{
-+ int i;
-+ char bit;
-+ unsigned int data;
-+
-+ SPI_CS_enable(1);
-+
-+ data = (block<<5) | 0x10 | subblock;
-+
-+ //send write command
-+ for(i=SPI_OP_LEN-1;i>=0;i--)
-+ {
-+ bit = (data>>i)& 0x01;
-+ SPI_write_bit(bit);
-+ }
-+
-+ // send 8 bits address (MSB first, LSB last)
-+ for(i=SPI_ADD_LEN-1;i>=0;i--)
-+ {
-+ bit = (addr>>i)& 0x01;
-+ SPI_write_bit(bit);
-+ }
-+ // send 32 bits data (MSB first, LSB last)
-+ for(i=SPI_DAT_LEN-1;i>=0;i--)
-+ {
-+ bit = (value>>i)& 0x01;
-+ SPI_write_bit(bit);
-+ }
-+
-+ SPI_CS_enable(0); // CS low
-+
-+}
-+
-+
-+/************************************
-+* SPI_write_bit
-+* bit_EEDO -> 1 or 0 to be written
-+************************************/
-+void SPI_write_bit(char bit_EEDO)
-+{
-+ unsigned int addr;
-+ unsigned int value;
-+
-+ addr = (GPIO_BASE_ADDR1 + GPIO_PIN_DIR);
-+ value = readl(addr) |GPIO_EECK |GPIO_MOSI ; /* set EECK/MISO Pin to output */
-+ writel(value,addr);
-+ if(bit_EEDO)
-+ {
-+ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_SET);
-+ writel(GPIO_MOSI,addr); /* set MISO to 1 */
-+
-+ }
-+ else
-+ {
-+ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_CLEAR);
-+ writel(GPIO_MOSI,addr); /* set MISO to 0 */
-+ }
-+ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_SET);
-+ writel(GPIO_EECK,addr); /* set EECK to 1 */
-+ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_CLEAR);
-+ writel(GPIO_EECK,addr); /* set EECK to 0 */
-+
-+ //return ;
-+}
-+
-+/**********************************************************************
-+* read a bit from ADM6996 register
-+***********************************************************************/
-+unsigned int SPI_read_bit(void) // read data from
-+{
-+ unsigned int addr;
-+ unsigned int value;
-+
-+ addr = (GPIO_BASE_ADDR1 + GPIO_PIN_DIR);
-+ value = readl(addr) & (~GPIO_MISO); // set EECK to output and MISO to input
-+ writel(value,addr);
-+
-+ addr =(GPIO_BASE_ADDR1 + GPIO_DATA_SET);
-+ writel(GPIO_EECK,addr); // set EECK to 1
-+
-+
-+ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_IN);
-+ value = readl(addr) ;
-+
-+ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_CLEAR);
-+ writel(GPIO_EECK,addr); // set EECK to 0
-+
-+
-+ value = value >> 30;
-+ return value ;
-+}
-+
-+/******************************************
-+* SPI_default
-+* EEPROM content default value
-+*******************************************/
-+int SPI_default(void)
-+{
-+ int i;
-+ unsigned reg_val,cmd;
-+
-+#if 0
-+ SPI_write(7,0,0x1C,0x01); // map code space to 0
-+
-+ reg_val = SPI_read(7,0,0x10);
-+ reg_val |= 0x0146;
-+ reg_val &= ~0x0001;
-+ SPI_write(7,0,0x10,reg_val); // reset iCPU and enable ext_access
-+ SPI_write(7,0,0x11,0x0000); // start address
-+ for(i=0;i<sizeof(vts_img);i++){
-+ SPI_write(7,0,0x12,vts_img[i]); // fill in ROM data
-+ }
-+ reg_val |= BIT(0)|BIT(3);
-+ SPI_write(7,0,0x10,reg_val); // release iCPU
-+ SPI_write(7,0,0x10,SPI_read(7,0,0x10)&~BIT(7)); // release iCPU
-+ return ;
-+#endif
-+
-+
-+ for(i=0;i<15;i++){
-+ if(i!=6 && i!=7)
-+ SPI_write(3,2,0,0x1010400+i); // Initial memory
-+ mdelay(1);
-+ }
-+
-+ mdelay(30);
-+
-+ SPI_write(2,0,0xB0,0x05); // Clear MAC table
-+ SPI_write(2,0,0xD0,0x03); // Clear VLAN
-+
-+ //for(i=0;i<5;i++)
-+ SPI_write(1,6,0x19,0x2C); // Double Data rate
-+
-+ for(i=0;i<4;i++){
-+ SPI_write(1,i,0x00,0x30050472); // MAC configure
-+ SPI_write(1,i,0x00,0x10050442); // MAC configure
-+ SPI_write(1,i,0x10,0x5F4); // Max length
-+ SPI_write(1,i,0x04,0x00030000); // Flow control
-+ SPI_write(1,i,0xDF,0x00000001); // Flow control
-+ SPI_write(1,i,0x08,0x000050c2); // Flow control mac high
-+ SPI_write(1,i,0x0C,0x002b00f1); // Flow control mac low
-+ SPI_write(1,i,0x6E,BIT(3)); // forward pause frame
-+ }
-+ SPI_write(1,i,0x00,0x20000030); // set port 4 as reset
-+
-+ SPI_write(1,6,0x00,0x300701B1); // MAC configure
-+ SPI_write(1,6,0x00,0x10070181); // MAC configure
-+ SPI_write(1,6,0x10,0x5F4); // Max length
-+ SPI_write(1,6,0x04,0x00030000); // Flow control
-+ SPI_write(1,6,0xDF,0x00000002); // Flow control
-+ SPI_write(1,6,0x08,0x000050c2); // Flow control mac high
-+ SPI_write(1,6,0x0C,0x002b00f1); // Flow control mac low
-+ SPI_write(1,6,0x6E,BIT(3)); // forward pause frame
-+
-+
-+ //SPI_write(7,0,0x05,0x31); // MII delay for loader
-+ //SPI_write(7,0,0x05,0x01); // MII delay for kernel
-+ SPI_write(7,0,0x05,0x33);
-+
-+ SPI_write(2,0,0x10,0x4F); // Receive mask
-+
-+ mdelay(50);
-+
-+ SPI_write(7,0,0x14,0x02); // Release Reset
-+
-+ mdelay(3);
-+
-+ for(i=0;i<4;i++){
-+ init_seq_7385(i);
-+ phy_receiver_init(i);
-+ cmd = BIT(26)|(i<<21)|(0x1B<<16); // Config LED
-+ SPI_write(3,0,1,cmd);
-+ mdelay(10);
-+ reg_val = SPI_read(3,0,2);
-+ reg_val &= 0xFF00;
-+ reg_val |= 0x61;
-+ cmd = (i<<21)|(0x1B<<16)|reg_val;
-+ SPI_write(3,0,1,cmd);
-+
-+ cmd = BIT(26)|(i<<21)|(0x04<<16); // Pause enable
-+ SPI_write(3,0,1,cmd);
-+ mdelay(10);
-+ reg_val = SPI_read(3,0,2);
-+ reg_val |= BIT(10)|BIT(11);
-+ cmd = (i<<21)|(0x04<<16)|reg_val;
-+ SPI_write(3,0,1,cmd);
-+
-+ cmd = BIT(26)|(i<<21)|(0x0<<16); // collision test and re-negotiation
-+ SPI_write(3,0,1,cmd);
-+ mdelay(10);
-+ reg_val = SPI_read(3,0,2);
-+ reg_val |= BIT(7)|BIT(8)|BIT(9);
-+ cmd = (i<<21)|(0x0<<16)|reg_val;
-+ SPI_write(3,0,1,cmd);
-+ }
-+ init_seq_7385(i);
-+ writel(0x5787a7f0,GMAC_GLOBAL_BASE_ADDR+0x1c);//For switch timing
-+ return 4; // return port_no
-+}
-+EXPORT_SYMBOL(SPI_default);
-+
-+/***********************************************************
-+* SPI_CS_enable
-+* before access ,you have to enable Chip Select. (pull high)
-+* When fisish, you should pull low !!
-+*************************************************************/
-+void SPI_CS_enable(unsigned char enable)
-+{
-+
-+ unsigned int addr,value;
-+
-+ addr = (GPIO_BASE_ADDR1 + GPIO_PIN_DIR);
-+ value = readl(addr) |GPIO_EECS |GPIO_EECK; /* set EECS/EECK Pin to output */
-+ writel(value,addr);
-+
-+ if(enable)
-+ {
-+ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_CLEAR);
-+ writel(GPIO_EECK,addr); /* set EECK to 0 */ // pull low clk first
-+ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_CLEAR);
-+ writel(GPIO_EECS,addr); /* set EECS to 0 */
-+
-+ }
-+ else
-+ {
-+ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_SET);
-+ writel(GPIO_EECK,addr); /* set EECK to 1 */ // pull high clk before disable
-+ writel(GPIO_EECS,addr); /* set EECS to 1 */
-+ }
-+}
-+
-+
-+/************************************************
-+* SPI_read
-+* table -> which table to be read: 1/count 0/EEPROM
-+* addr -> Address to be read
-+* return : Value of the register
-+*************************************************/
-+unsigned int SPI_read(unsigned char block,unsigned char subblock,unsigned char addr)
-+{
-+ int i;
-+ char bit;
-+ unsigned int data,value=0;
-+
-+ SPI_CS_enable(1);
-+
-+ data = (block<<5) | subblock;
-+
-+ //send write command
-+ for(i=SPI_OP_LEN-1;i>=0;i--)
-+ {
-+ bit = (data>>i)& 0x01;
-+ SPI_write_bit(bit);
-+ }
-+
-+ // send 8 bits address (MSB first, LSB last)
-+ for(i=SPI_ADD_LEN-1;i>=0;i--)
-+ {
-+ bit = (addr>>i)& 0x01;
-+ SPI_write_bit(bit);
-+ }
-+
-+ // dummy read for chip ready
-+ for(i=0;i<8;i++)
-+ SPI_read_bit();
-+
-+
-+ // read 32 bits data (MSB first, LSB last)
-+ for(i=SPI_DAT_LEN-1;i>=0;i--)
-+ {
-+ bit = SPI_read_bit();
-+ value |= bit<<i;
-+ }
-+
-+ SPI_CS_enable(0); // CS low
-+ return(value);
-+
-+}
-+
-+void pull_low_gpio(unsigned int val)
-+{
-+
-+ unsigned int addr,value;
-+
-+ addr = (GPIO_BASE_ADDR1 + GPIO_DATA_CLEAR);
-+ writel(val,addr); /* set pin low to save power*/
-+
-+ addr = (GPIO_BASE_ADDR1 + GPIO_PIN_DIR);
-+ value = readl(addr) & ~ val; /* set Pin to input */
-+ writel(value,addr);
-+
-+// value = readl(GMAC_GLOBAL_BASE_ADDR+0x0C); // reset GPIO1 module(self clear)
-+// value |= BIT(21);
-+// writel(value,GMAC_GLOBAL_BASE_ADDR+0x0C);
-+}
-+
-+unsigned int SPI_get_identifier(void)
-+{
-+ unsigned int flag=0;
-+
-+ SPI_write(7,0,0x01,0x01);
-+ flag = SPI_read(7,0,0x18); // chip id
-+ if((flag & 0x0ffff000)==0x07385000){
-+ printk("Get VSC-switch ID 0x%08x\n",flag);
-+ //Giga_switch = 1;;
-+ return 1;
-+ }
-+ else{
-+ printk("VSC-switch not found\n");
-+ //Giga_switch = 0;
-+ pull_low_gpio(GPIO_EECK|GPIO_MOSI|GPIO_MISO|GPIO_EECS); // reduce power consume
-+ return 0;
-+ }
-+}
-+EXPORT_SYMBOL(SPI_get_identifier);
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/sl351x_gmac.h
-@@ -0,0 +1,2223 @@
-+/****************************************************************************
-+* Copyright 2006 StorLink Semiconductors, Inc. All rights reserved.
-+*--------------------------------------------------------------------------
-+* Name : sl351x_gmac.h
-+* Description :
-+* Define for device driver of Storlink SL351x network Engine
-+*
-+* Historych
-+*
-+* Date Writer Description
-+* ----------- ----------- -------------------------------------------------
-+* 08/22/2005 Gary Chen Create and implement
-+*
-+****************************************************************************/
-+#ifndef _GMAC_SL351x_H
-+#define _GMAC_SL351x_H
-+#include <linux/skbuff.h>
-+
-+#define SL351x_GMAC_WORKAROUND 1
-+
-+#undef BIG_ENDIAN
-+#define BIG_ENDIAN 0
-+#define GMAC_DEBUG 1
-+#define GMAC_NUM 2
-+//#define L2_jumbo_frame 1
-+
-+#define _PACKED_ __attribute__ ((aligned(1), packed))
-+
-+#ifndef BIT
-+#define BIT(x) (1 << (x))
-+#endif
-+
-+#define REG32(addr) (*(volatile unsigned long * const)(addr))
-+
-+#define DMA_MALLOC(size,handle) pci_alloc_consistent(NULL,size,handle)
-+#define DMA_MFREE(mem,size,handle) pci_free_consistent(NULL,size,mem,handle)
-+
-+// Define frame size
-+#define ETHER_ADDR_LEN 6
-+#define GMAC_MAX_ETH_FRAME_SIZE 1514
-+#define GMAC_TX_BUF_SIZE ((GMAC_MAX_ETH_FRAME_SIZE + 31) & (~31))
-+#define MAX_ISR_WORK 20
-+
-+#ifdef L2_jumbo_frame
-+#define SW_RX_BUF_SIZE 9234 // 2048 ,9234
-+#else
-+#define SW_RX_BUF_SIZE 1536 // 2048
-+#endif
-+
-+#define HW_RX_BUF_SIZE 1536 // 2048
-+
-+#define GMAC_DEV_TX_TIMEOUT (10*HZ) //add by CH
-+#define SKB_RESERVE_BYTES 16
-+
-+/**********************************************************************
-+ * Base Register
-+ **********************************************************************/
-+#define TOE_BASE (IO_ADDRESS(SL2312_TOE_BASE))
-+#define GMAC_GLOBAL_BASE_ADDR (IO_ADDRESS(SL2312_GLOBAL_BASE))
-+
-+#define TOE_GLOBAL_BASE (TOE_BASE + 0x0000)
-+#define TOE_NONTOE_QUE_HDR_BASE (TOE_BASE + 0x2000)
-+#define TOE_TOE_QUE_HDR_BASE (TOE_BASE + 0x3000)
-+#define TOE_V_BIT_BASE (TOE_BASE + 0x4000)
-+#define TOE_A_BIT_BASE (TOE_BASE + 0x6000)
-+#define TOE_GMAC0_DMA_BASE (TOE_BASE + 0x8000)
-+#define TOE_GMAC0_BASE (TOE_BASE + 0xA000)
-+#define TOE_GMAC1_DMA_BASE (TOE_BASE + 0xC000)
-+#define TOE_GMAC1_BASE (TOE_BASE + 0xE000)
-+
-+/**********************************************************************
-+ * Queue ID
-+ **********************************************************************/
-+#define TOE_SW_FREE_QID 0x00
-+#define TOE_HW_FREE_QID 0x01
-+#define TOE_GMAC0_SW_TXQ0_QID 0x02
-+#define TOE_GMAC0_SW_TXQ1_QID 0x03
-+#define TOE_GMAC0_SW_TXQ2_QID 0x04
-+#define TOE_GMAC0_SW_TXQ3_QID 0x05
-+#define TOE_GMAC0_SW_TXQ4_QID 0x06
-+#define TOE_GMAC0_SW_TXQ5_QID 0x07
-+#define TOE_GMAC0_HW_TXQ0_QID 0x08
-+#define TOE_GMAC0_HW_TXQ1_QID 0x09
-+#define TOE_GMAC0_HW_TXQ2_QID 0x0A
-+#define TOE_GMAC0_HW_TXQ3_QID 0x0B
-+#define TOE_GMAC1_SW_TXQ0_QID 0x12
-+#define TOE_GMAC1_SW_TXQ1_QID 0x13
-+#define TOE_GMAC1_SW_TXQ2_QID 0x14
-+#define TOE_GMAC1_SW_TXQ3_QID 0x15
-+#define TOE_GMAC1_SW_TXQ4_QID 0x16
-+#define TOE_GMAC1_SW_TXQ5_QID 0x17
-+#define TOE_GMAC1_HW_TXQ0_QID 0x18
-+#define TOE_GMAC1_HW_TXQ1_QID 0x19
-+#define TOE_GMAC1_HW_TXQ2_QID 0x1A
-+#define TOE_GMAC1_HW_TXQ3_QID 0x1B
-+#define TOE_GMAC0_DEFAULT_QID 0x20
-+#define TOE_GMAC1_DEFAULT_QID 0x21
-+#define TOE_CLASSIFICATION_QID(x) (0x22 + x) // 0x22 ~ 0x2F
-+#define TOE_TOE_QID(x) (0x40 + x) // 0x40 ~ 0x7F
-+
-+/**********************************************************************
-+ * TOE DMA Queue Number should be 2^n, n = 6...12
-+ * TOE DMA Queues are the following queue types:
-+ * SW Free Queue, HW Free Queue,
-+ * GMAC 0/1 SW TX Q0-5, and GMAC 0/1 HW TX Q0-5
-+ * They have same descriptor numbers.
-+ * The base address and descriptor number are configured at
-+ * DMA Queues Descriptor Ring Base Address/Size Register (offset 0x0004)
-+ **********************************************************************/
-+#define TOE_SW_FREEQ_DESC_POWER 10
-+#define TOE_SW_FREEQ_DESC_NUM (1<<TOE_SW_FREEQ_DESC_POWER)
-+#define TOE_HW_FREEQ_DESC_POWER 8
-+#define TOE_HW_FREEQ_DESC_NUM (1<<TOE_HW_FREEQ_DESC_POWER)
-+#define TOE_GMAC0_SWTXQ_DESC_POWER 8
-+#define TOE_GMAC0_SWTXQ_DESC_NUM (1<<TOE_GMAC0_SWTXQ_DESC_POWER)
-+#define TOE_GMAC0_HWTXQ_DESC_POWER 8
-+#define TOE_GMAC0_HWTXQ_DESC_NUM (1<<TOE_GMAC0_HWTXQ_DESC_POWER)
-+#define TOE_GMAC1_SWTXQ_DESC_POWER 8
-+#define TOE_GMAC1_SWTXQ_DESC_NUM (1<<TOE_GMAC1_SWTXQ_DESC_POWER)
-+#define TOE_GMAC1_HWTXQ_DESC_POWER 8
-+#define TOE_GMAC1_HWTXQ_DESC_NUM (1<<TOE_GMAC1_HWTXQ_DESC_POWER)
-+#define TOE_DEFAULT_Q0_DESC_POWER 8
-+#define TOE_DEFAULT_Q0_DESC_NUM (1<<TOE_DEFAULT_Q0_DESC_POWER)
-+#define TOE_DEFAULT_Q1_DESC_POWER 8
-+#define TOE_DEFAULT_Q1_DESC_NUM (1<<TOE_DEFAULT_Q1_DESC_POWER)
-+#define TOE_TOE_DESC_POWER 8
-+#define TOE_TOE_DESC_NUM (1<<TOE_TOE_DESC_POWER)
-+#define TOE_CLASS_DESC_POWER 8
-+#define TOE_CLASS_DESC_NUM (1<<TOE_CLASS_DESC_POWER)
-+#define TOE_INTR_DESC_POWER 8
-+#define TOE_INTR_DESC_NUM (1<<TOE_INTR_DESC_POWER)
-+
-+#define TOE_TOE_QUEUE_MAX 64
-+#define TOE_TOE_QUEUE_NUM 64
-+#define TOE_CLASS_QUEUE_MAX 14
-+#define TOE_CLASS_QUEUE_NUM 14
-+#define TOE_INTR_QUEUE_MAX 4
-+#define TOE_INTR_QUEUE_NUM 4
-+#define TOE_SW_TXQ_MAX 6
-+#define TOE_SW_TXQ_NUM 1
-+#define TOE_HW_TXQ_MAX 4
-+#define TOE_HW_TXQ_NUM 4
-+#define _max(x,y) ((x>y) ? x :y)
-+#define TX_DESC_NUM _max(TOE_GMAC0_SWTXQ_DESC_NUM, TOE_GMAC1_SWTXQ_DESC_NUM)
-+
-+#define RWPTR_ADVANCE_ONE(x, max) ((x == (max -1)) ? 0 : x+1)
-+#define RWPTR_RECEDE_ONE(x, max) ((x == 0) ? (max -1) : x-1)
-+#define SET_WPTR(addr, data) (*(volatile u16 * const)((u32)(addr)+2) = (u16)data)
-+#define SET_RPTR(addr, data) (*(volatile u16 * const)((u32)(addr)) = (u16)data)
-+
-+/**********************************************************************
-+ * Global registers
-+ * #define TOE_GLOBAL_BASE (TOE_BASE + 0x0000)
-+ * Base 0x60000000
-+ **********************************************************************/
-+#define GLOBAL_TOE_VERSION_REG 0x0000
-+#define GLOBAL_SW_FREEQ_BASE_SIZE_REG 0x0004
-+#define GLOBAL_HW_FREEQ_BASE_SIZE_REG 0x0008
-+#define GLOBAL_DMA_SKB_SIZE_REG 0x0010
-+#define GLOBAL_SWFQ_RWPTR_REG 0x0014
-+#define GLOBAL_HWFQ_RWPTR_REG 0x0018
-+#define GLOBAL_INTERRUPT_STATUS_0_REG 0x0020
-+#define GLOBAL_INTERRUPT_ENABLE_0_REG 0x0024
-+#define GLOBAL_INTERRUPT_SELECT_0_REG 0x0028
-+#define GLOBAL_INTERRUPT_STATUS_1_REG 0x0030
-+#define GLOBAL_INTERRUPT_ENABLE_1_REG 0x0034
-+#define GLOBAL_INTERRUPT_SELECT_1_REG 0x0038
-+#define GLOBAL_INTERRUPT_STATUS_2_REG 0x0040
-+#define GLOBAL_INTERRUPT_ENABLE_2_REG 0x0044
-+#define GLOBAL_INTERRUPT_SELECT_2_REG 0x0048
-+#define GLOBAL_INTERRUPT_STATUS_3_REG 0x0050
-+#define GLOBAL_INTERRUPT_ENABLE_3_REG 0x0054
-+#define GLOBAL_INTERRUPT_SELECT_3_REG 0x0058
-+#define GLOBAL_INTERRUPT_STATUS_4_REG 0x0060
-+#define GLOBAL_INTERRUPT_ENABLE_4_REG 0x0064
-+#define GLOBAL_INTERRUPT_SELECT_4_REG 0x0068
-+#define GLOBAL_HASH_TABLE_BASE_REG 0x006C
-+#define GLOBAL_QUEUE_THRESHOLD_REG 0x0070
-+
-+/**********************************************************************
-+ * GMAC 0/1 DMA/TOE register
-+ * #define TOE_GMAC0_DMA_BASE (TOE_BASE + 0x8000)
-+ * #define TOE_GMAC1_DMA_BASE (TOE_BASE + 0xC000)
-+ * Base 0x60008000 or 0x6000C000
-+ **********************************************************************/
-+#define GMAC_DMA_CTRL_REG 0x0000
-+#define GMAC_TX_WEIGHTING_CTRL_0_REG 0x0004
-+#define GMAC_TX_WEIGHTING_CTRL_1_REG 0x0008
-+#define GMAC_SW_TX_QUEUE0_PTR_REG 0x000C
-+#define GMAC_SW_TX_QUEUE1_PTR_REG 0x0010
-+#define GMAC_SW_TX_QUEUE2_PTR_REG 0x0014
-+#define GMAC_SW_TX_QUEUE3_PTR_REG 0x0018
-+#define GMAC_SW_TX_QUEUE4_PTR_REG 0x001C
-+#define GMAC_SW_TX_QUEUE5_PTR_REG 0x0020
-+#define GMAC_HW_TX_QUEUE0_PTR_REG 0x0024
-+#define GMAC_HW_TX_QUEUE1_PTR_REG 0x0028
-+#define GMAC_HW_TX_QUEUE2_PTR_REG 0x002C
-+#define GMAC_HW_TX_QUEUE3_PTR_REG 0x0030
-+#define GMAC_DMA_TX_FIRST_DESC_REG 0x0038
-+#define GMAC_DMA_TX_CURR_DESC_REG 0x003C
-+#define GMAC_DMA_TX_DESC_WORD0_REG 0x0040
-+#define GMAC_DMA_TX_DESC_WORD1_REG 0x0044
-+#define GMAC_DMA_TX_DESC_WORD2_REG 0x0048
-+#define GMAC_DMA_TX_DESC_WORD3_REG 0x004C
-+#define GMAC_SW_TX_QUEUE_BASE_REG 0x0050
-+#define GMAC_HW_TX_QUEUE_BASE_REG 0x0054
-+#define GMAC_DMA_RX_FIRST_DESC_REG 0x0058
-+#define GMAC_DMA_RX_CURR_DESC_REG 0x005C
-+#define GMAC_DMA_RX_DESC_WORD0_REG 0x0060
-+#define GMAC_DMA_RX_DESC_WORD1_REG 0x0064
-+#define GMAC_DMA_RX_DESC_WORD2_REG 0x0068
-+#define GMAC_DMA_RX_DESC_WORD3_REG 0x006C
-+#define GMAC_HASH_ENGINE_REG0 0x0070
-+#define GMAC_HASH_ENGINE_REG1 0x0074
-+#define GMAC_MR0CR0 0x0078 // matching rule 0 Control register 0
-+#define GMAC_MR0CR1 0x007C // matching rule 0 Control register 1
-+#define GMAC_MR0CR2 0x0080 // matching rule 0 Control register 2
-+#define GMAC_MR1CR0 0x0084 // matching rule 1 Control register 0
-+#define GMAC_MR1CR1 0x0088 // matching rule 1 Control register 1
-+#define GMAC_MR1CR2 0x008C // matching rule 1 Control register 2
-+#define GMAC_MR2CR0 0x0090 // matching rule 2 Control register 0
-+#define GMAC_MR2CR1 0x0094 // matching rule 2 Control register 1
-+#define GMAC_MR2CR2 0x0098 // matching rule 2 Control register 2
-+#define GMAC_MR3CR0 0x009C // matching rule 3 Control register 0
-+#define GMAC_MR3CR1 0x00A0 // matching rule 3 Control register 1
-+#define GMAC_MR3CR2 0x00A4 // matching rule 3 Control register 2
-+#define GMAC_SPR0 0x00A8 // Support Protocol Regsister 0
-+#define GMAC_SPR1 0x00AC // Support Protocol Regsister 1
-+#define GMAC_SPR2 0x00B0 // Support Protocol Regsister 2
-+#define GMAC_SPR3 0x00B4 // Support Protocol Regsister 3
-+#define GMAC_SPR4 0x00B8 // Support Protocol Regsister 4
-+#define GMAC_SPR5 0x00BC // Support Protocol Regsister 5
-+#define GMAC_SPR6 0x00C0 // Support Protocol Regsister 6
-+#define GMAC_SPR7 0x00C4 // Support Protocol Regsister 7
-+#define GMAC_AHB_WEIGHT_REG 0x00C8 // GMAC Hash/Rx/Tx AHB Weighting register
-+
-+/**********************************************************************
-+ * TOE GMAC 0/1 register
-+ * #define TOE_GMAC0_BASE (TOE_BASE + 0xA000)
-+ * #define TOE_GMAC1_BASE (TOE_BASE + 0xE000)
-+ * Base 0x6000A000 or 0x6000E000
-+ **********************************************************************/
-+enum GMAC_REGISTER {
-+ GMAC_STA_ADD0 = 0x0000,
-+ GMAC_STA_ADD1 = 0x0004,
-+ GMAC_STA_ADD2 = 0x0008,
-+ GMAC_RX_FLTR = 0x000c,
-+ GMAC_MCAST_FIL0 = 0x0010,
-+ GMAC_MCAST_FIL1 = 0x0014,
-+ GMAC_CONFIG0 = 0x0018,
-+ GMAC_CONFIG1 = 0x001c,
-+ GMAC_CONFIG2 = 0x0020,
-+ GMAC_CONFIG3 = 0x0024,
-+ GMAC_RESERVED = 0x0028,
-+ GMAC_STATUS = 0x002c,
-+ GMAC_IN_DISCARDS= 0x0030,
-+ GMAC_IN_ERRORS = 0x0034,
-+ GMAC_IN_MCAST = 0x0038,
-+ GMAC_IN_BCAST = 0x003c,
-+ GMAC_IN_MAC1 = 0x0040, // for STA 1 MAC Address
-+ GMAC_IN_MAC2 = 0x0044 // for STA 2 MAC Address
-+};
-+/**********************************************************************
-+ * TOE version Register (offset 0x0000)
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit
-+ {
-+#if (BIG_ENDIAN==1)
-+
-+ unsigned int reserved : 15; // bit 31:17
-+ unsigned int v_bit_mode : 1; // bit 16 1: 128-entry
-+ unsigned int device_id : 12; // bit 15:4 Device ID
-+ unsigned int revision_id : 4; // bit 3:0 Revision ID
-+#else
-+ unsigned int revision_id : 4; // bit 3:0 Revision ID
-+ unsigned int device_id : 12; // bit 15:4 Device ID
-+ unsigned int v_bit_mode : 1; // bit 16 1: 128-entry
-+ unsigned int reserved : 15; // bit 31:17
-+#endif
-+ } bits;
-+} TOE_VERSION_T;
-+
-+
-+/**********************************************************************
-+ * DMA Queues description Ring Base Address/Size Register (offset 0x0004)
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ unsigned int base_size;
-+} DMA_Q_BASE_SIZE_T;
-+#define DMA_Q_BASE_MASK (~0x0f)
-+
-+/**********************************************************************
-+ * DMA SKB Buffer register (offset 0x0008)
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_0008
-+ {
-+#if (BIG_ENDIAN==1)
-+
-+ unsigned int hw_skb_size : 16; // bit 31:16 HW Free poll SKB Size
-+ unsigned int sw_skb_size : 16; // bit 15:0 SW Free poll SKB Size
-+#else
-+ unsigned int sw_skb_size : 16; // bit 15:0 SW Free poll SKB Size
-+ unsigned int hw_skb_size : 16; // bit 31:16 HW Free poll SKB Size
-+#endif
-+ } bits;
-+} DMA_SKB_SIZE_T;
-+
-+/**********************************************************************
-+ * DMA SW Free Queue Read/Write Pointer Register (offset 0x000C)
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_000c
-+ {
-+#if (BIG_ENDIAN==1)
-+
-+ unsigned int wptr : 16; // bit 31:16 Write Ptr, RW
-+ unsigned int rptr : 16; // bit 15:0 Read Ptr, RO
-+#else
-+ unsigned int rptr : 16; // bit 15:0 Read Ptr, RO
-+ unsigned int wptr : 16; // bit 31:16 Write Ptr, RW
-+#endif
-+ } bits;
-+} DMA_RWPTR_T;
-+
-+/**********************************************************************
-+ * DMA HW Free Queue Read/Write Pointer Register (offset 0x0010)
-+ **********************************************************************/
-+// see DMA_RWPTR_T structure
-+
-+/**********************************************************************
-+ * Interrupt Status Register 0 (offset 0x0020)
-+ * Interrupt Mask Register 0 (offset 0x0024)
-+ * Interrupt Select Register 0 (offset 0x0028)
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_0020
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int txDerr1 : 1; // bit 31 GMAC1 AHB Bus Error while Tx
-+ unsigned int txPerr1 : 1; // bit 30 GMAC1 Tx Descriptor Protocol Error
-+ unsigned int txDerr0 : 1; // bit 29 GMAC0 AHB Bus Error while Tx
-+ unsigned int txPerr0 : 1; // bit 28 GMAC0 Tx Descriptor Protocol Error
-+ unsigned int rxDerr1 : 1; // bit 27 GMAC1 AHB Bus Error while Rx
-+ unsigned int rxPerr1 : 1; // bit 26 GMAC1 Rx Descriptor Protocol Error
-+ unsigned int rxDerr0 : 1; // bit 25 GMAC0 AHB Bus Error while Rx
-+ unsigned int rxPerr0 : 1; // bit 24 GMAC0 Rx Descriptor Protocol Error
-+ unsigned int swtq15_fin : 1; // bit 23 GMAC1 SW Tx Queue 5 Finish Interrupt
-+ unsigned int swtq14_fin : 1; // bit 22 GMAC1 SW Tx Queue 4 Finish Interrupt
-+ unsigned int swtq13_fin : 1; // bit 21 GMAC1 SW Tx Queue 3 Finish Interrupt
-+ unsigned int swtq12_fin : 1; // bit 20 GMAC1 SW Tx Queue 2 Finish Interrupt
-+ unsigned int swtq11_fin : 1; // bit 19 GMAC1 SW Tx Queue 1 Finish Interrupt
-+ unsigned int swtq10_fin : 1; // bit 18 GMAC1 SW Tx Queue 0 Finish Interrupt
-+ unsigned int swtq05_fin : 1; // bit 17 GMAC0 SW Tx Queue 5 Finish Interrupt
-+ unsigned int swtq04_fin : 1; // bit 16 GMAC0 SW Tx Queue 4 Finish Interrupt
-+ unsigned int swtq03_fin : 1; // bit 15 GMAC0 SW Tx Queue 3 Finish Interrupt
-+ unsigned int swtq02_fin : 1; // bit 14 GMAC0 SW Tx Queue 2 Finish Interrupt
-+ unsigned int swtq01_fin : 1; // bit 13 GMAC0 SW Tx Queue 1 Finish Interrupt
-+ unsigned int swtq00_fin : 1; // bit 12 GMAC0 SW Tx Queue 0 Finish Interrupt
-+ unsigned int swtq15_eof : 1; // bit 11 GMAC1 SW Tx Queue 5 EOF Interrupt
-+ unsigned int swtq14_eof : 1; // bit 10 GMAC1 SW Tx Queue 4 EOF Interrupt
-+ unsigned int swtq13_eof : 1; // bit 9 GMAC1 SW Tx Queue 3 EOF Interrupt
-+ unsigned int swtq12_eof : 1; // bit 8 GMAC1 SW Tx Queue 2 EOF Interrupt
-+ unsigned int swtq11_eof : 1; // bit 7 GMAC1 SW Tx Queue 1 EOF Interrupt
-+ unsigned int swtq10_eof : 1; // bit 6 GMAC1 SW Tx Queue 0 EOF Interrupt
-+ unsigned int swtq05_eof : 1; // bit 5 GMAC0 SW Tx Queue 5 EOF Interrupt
-+ unsigned int swtq04_eof : 1; // bit 4 GMAC0 SW Tx Queue 4 EOF Interrupt
-+ unsigned int swtq03_eof : 1; // bit 3 GMAC0 SW Tx Queue 3 EOF Interrupt
-+ unsigned int swtq02_eof : 1; // bit 2 GMAC0 SW Tx Queue 2 EOF Interrupt
-+ unsigned int swtq01_eof : 1; // bit 1 GMAC0 SW Tx Queue 1 EOF Interrupt
-+ unsigned int swtq00_eof : 1; // bit 0 GMAC0 SW Tx Queue 0 EOF Interrupt
-+#else
-+ unsigned int swtq00_eof : 1; // bit 0 GMAC0 SW Tx Queue 0 EOF Interrupt
-+ unsigned int swtq01_eof : 1; // bit 1 GMAC0 SW Tx Queue 1 EOF Interrupt
-+ unsigned int swtq02_eof : 1; // bit 2 GMAC0 SW Tx Queue 2 EOF Interrupt
-+ unsigned int swtq03_eof : 1; // bit 3 GMAC0 SW Tx Queue 3 EOF Interrupt
-+ unsigned int swtq04_eof : 1; // bit 4 GMAC0 SW Tx Queue 4 EOF Interrupt
-+ unsigned int swtq05_eof : 1; // bit 5 GMAC0 SW Tx Queue 5 EOF Interrupt
-+ unsigned int swtq10_eof : 1; // bit 6 GMAC1 SW Tx Queue 0 EOF Interrupt
-+ unsigned int swtq11_eof : 1; // bit 7 GMAC1 SW Tx Queue 1 EOF Interrupt
-+ unsigned int swtq12_eof : 1; // bit 8 GMAC1 SW Tx Queue 2 EOF Interrupt
-+ unsigned int swtq13_eof : 1; // bit 9 GMAC1 SW Tx Queue 3 EOF Interrupt
-+ unsigned int swtq14_eof : 1; // bit 10 GMAC1 SW Tx Queue 4 EOF Interrupt
-+ unsigned int swtq15_eof : 1; // bit 11 GMAC1 SW Tx Queue 5 EOF Interrupt
-+ unsigned int swtq00_fin : 1; // bit 12 GMAC0 SW Tx Queue 0 Finish Interrupt
-+ unsigned int swtq01_fin : 1; // bit 13 GMAC0 SW Tx Queue 1 Finish Interrupt
-+ unsigned int swtq02_fin : 1; // bit 14 GMAC0 SW Tx Queue 2 Finish Interrupt
-+ unsigned int swtq03_fin : 1; // bit 15 GMAC0 SW Tx Queue 3 Finish Interrupt
-+ unsigned int swtq04_fin : 1; // bit 16 GMAC0 SW Tx Queue 4 Finish Interrupt
-+ unsigned int swtq05_fin : 1; // bit 17 GMAC0 SW Tx Queue 5 Finish Interrupt
-+ unsigned int swtq10_fin : 1; // bit 18 GMAC1 SW Tx Queue 0 Finish Interrupt
-+ unsigned int swtq11_fin : 1; // bit 19 GMAC1 SW Tx Queue 1 Finish Interrupt
-+ unsigned int swtq12_fin : 1; // bit 20 GMAC1 SW Tx Queue 2 Finish Interrupt
-+ unsigned int swtq13_fin : 1; // bit 21 GMAC1 SW Tx Queue 3 Finish Interrupt
-+ unsigned int swtq14_fin : 1; // bit 22 GMAC1 SW Tx Queue 4 Finish Interrupt
-+ unsigned int swtq15_fin : 1; // bit 23 GMAC1 SW Tx Queue 5 Finish Interrupt
-+ unsigned int rxPerr0 : 1; // bit 24 GMAC0 Rx Descriptor Protocol Error
-+ unsigned int rxDerr0 : 1; // bit 25 GMAC0 AHB Bus Error while Rx
-+ unsigned int rxPerr1 : 1; // bit 26 GMAC1 Rx Descriptor Protocol Error
-+ unsigned int rxDerr1 : 1; // bit 27 GMAC1 AHB Bus Error while Rx
-+ unsigned int txPerr0 : 1; // bit 28 GMAC0 Tx Descriptor Protocol Error
-+ unsigned int txDerr0 : 1; // bit 29 GMAC0 AHB Bus Error while Tx
-+ unsigned int txPerr1 : 1; // bit 30 GMAC1 Tx Descriptor Protocol Error
-+ unsigned int txDerr1 : 1; // bit 31 GMAC1 AHB Bus Error while Tx
-+#endif
-+ } bits;
-+} INTR_REG0_T;
-+
-+#define GMAC1_TXDERR_INT_BIT BIT(31)
-+#define GMAC1_TXPERR_INT_BIT BIT(30)
-+#define GMAC0_TXDERR_INT_BIT BIT(29)
-+#define GMAC0_TXPERR_INT_BIT BIT(28)
-+#define GMAC1_RXDERR_INT_BIT BIT(27)
-+#define GMAC1_RXPERR_INT_BIT BIT(26)
-+#define GMAC0_RXDERR_INT_BIT BIT(25)
-+#define GMAC0_RXPERR_INT_BIT BIT(24)
-+#define GMAC1_SWTQ15_FIN_INT_BIT BIT(23)
-+#define GMAC1_SWTQ14_FIN_INT_BIT BIT(22)
-+#define GMAC1_SWTQ13_FIN_INT_BIT BIT(21)
-+#define GMAC1_SWTQ12_FIN_INT_BIT BIT(20)
-+#define GMAC1_SWTQ11_FIN_INT_BIT BIT(19)
-+#define GMAC1_SWTQ10_FIN_INT_BIT BIT(18)
-+#define GMAC0_SWTQ05_FIN_INT_BIT BIT(17)
-+#define GMAC0_SWTQ04_FIN_INT_BIT BIT(16)
-+#define GMAC0_SWTQ03_FIN_INT_BIT BIT(15)
-+#define GMAC0_SWTQ02_FIN_INT_BIT BIT(14)
-+#define GMAC0_SWTQ01_FIN_INT_BIT BIT(13)
-+#define GMAC0_SWTQ00_FIN_INT_BIT BIT(12)
-+#define GMAC1_SWTQ15_EOF_INT_BIT BIT(11)
-+#define GMAC1_SWTQ14_EOF_INT_BIT BIT(10)
-+#define GMAC1_SWTQ13_EOF_INT_BIT BIT(9)
-+#define GMAC1_SWTQ12_EOF_INT_BIT BIT(8)
-+#define GMAC1_SWTQ11_EOF_INT_BIT BIT(7)
-+#define GMAC1_SWTQ10_EOF_INT_BIT BIT(6)
-+#define GMAC0_SWTQ05_EOF_INT_BIT BIT(5)
-+#define GMAC0_SWTQ04_EOF_INT_BIT BIT(4)
-+#define GMAC0_SWTQ03_EOF_INT_BIT BIT(3)
-+#define GMAC0_SWTQ02_EOF_INT_BIT BIT(2)
-+#define GMAC0_SWTQ01_EOF_INT_BIT BIT(1)
-+#define GMAC0_SWTQ00_EOF_INT_BIT BIT(0)
-+
-+
-+/**********************************************************************
-+ * Interrupt Status Register 1 (offset 0x0030)
-+ * Interrupt Mask Register 1 (offset 0x0034)
-+ * Interrupt Select Register 1 (offset 0x0038)
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_0030
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int toe_iq3_full : 1; // bit 31 TOE Interrupt Queue 3 Full Interrupt
-+ unsigned int toe_iq2_full : 1; // bit 30 TOE Interrupt Queue 2 Full Interrupt
-+ unsigned int toe_iq1_full : 1; // bit 29 TOE Interrupt Queue 1 Full Interrupt
-+ unsigned int toe_iq0_full : 1; // bit 28 TOE Interrupt Queue 0 Full Interrupt
-+ unsigned int toe_iq3_intr : 1; // bit 27 TOE Interrupt Queue 3 with Interrupts
-+ unsigned int toe_iq2_intr : 1; // bit 26 TOE Interrupt Queue 2 with Interrupts
-+ unsigned int toe_iq1_intr : 1; // bit 25 TOE Interrupt Queue 1 with Interrupts
-+ unsigned int toe_iq0_intr : 1; // bit 24 TOE Interrupt Queue 0 with Interrupts
-+ unsigned int hwtq13_eof : 1; // bit 23 GMAC1 HW Tx Queue3 EOF Interrupt
-+ unsigned int hwtq12_eof : 1; // bit 22 GMAC1 HW Tx Queue2 EOF Interrupt
-+ unsigned int hwtq11_eof : 1; // bit 21 GMAC1 HW Tx Queue1 EOF Interrupt
-+ unsigned int hwtq10_eof : 1; // bit 20 GMAC1 HW Tx Queue0 EOF Interrupt
-+ unsigned int hwtq03_eof : 1; // bit 19 GMAC0 HW Tx Queue3 EOF Interrupt
-+ unsigned int hwtq02_eof : 1; // bit 18 GMAC0 HW Tx Queue2 EOF Interrupt
-+ unsigned int hwtq01_eof : 1; // bit 17 GMAC0 HW Tx Queue1 EOF Interrupt
-+ unsigned int hwtq00_eof : 1; // bit 16 GMAC0 HW Tx Queue0 EOF Interrupt
-+ unsigned int class_rx : 14; // bit 15:2 Classification Queue Rx Interrupt
-+ unsigned int default_q1_eof : 1; // bit 1 Default Queue 1 EOF Interrupt
-+ unsigned int default_q0_eof : 1; // bit 0 Default Queue 0 EOF Interrupt
-+#else
-+ unsigned int default_q0_eof : 1; // bit 0 Default Queue 0 EOF Interrupt
-+ unsigned int default_q1_eof : 1; // bit 1 Default Queue 1 EOF Interrupt
-+ unsigned int class_rx : 14; // bit 15:2 Classification Queue Rx Interrupt
-+ unsigned int hwtq00_eof : 1; // bit 16 GMAC0 HW Tx Queue0 EOF Interrupt
-+ unsigned int hwtq01_eof : 1; // bit 17 GMAC0 HW Tx Queue1 EOF Interrupt
-+ unsigned int hwtq02_eof : 1; // bit 18 GMAC0 HW Tx Queue2 EOF Interrupt
-+ unsigned int hwtq03_eof : 1; // bit 19 GMAC0 HW Tx Queue3 EOF Interrupt
-+ unsigned int hwtq10_eof : 1; // bit 20 GMAC1 HW Tx Queue0 EOF Interrupt
-+ unsigned int hwtq11_eof : 1; // bit 21 GMAC1 HW Tx Queue1 EOF Interrupt
-+ unsigned int hwtq12_eof : 1; // bit 22 GMAC1 HW Tx Queue2 EOF Interrupt
-+ unsigned int hwtq13_eof : 1; // bit 23 GMAC1 HW Tx Queue3 EOF Interrupt
-+ unsigned int toe_iq0_intr : 1; // bit 24 TOE Interrupt Queue 0 with Interrupts
-+ unsigned int toe_iq1_intr : 1; // bit 25 TOE Interrupt Queue 1 with Interrupts
-+ unsigned int toe_iq2_intr : 1; // bit 26 TOE Interrupt Queue 2 with Interrupts
-+ unsigned int toe_iq3_intr : 1; // bit 27 TOE Interrupt Queue 3 with Interrupts
-+ unsigned int toe_iq0_full : 1; // bit 28 TOE Interrupt Queue 0 Full Interrupt
-+ unsigned int toe_iq1_full : 1; // bit 29 TOE Interrupt Queue 1 Full Interrupt
-+ unsigned int toe_iq2_full : 1; // bit 30 TOE Interrupt Queue 2 Full Interrupt
-+ unsigned int toe_iq3_full : 1; // bit 31 TOE Interrupt Queue 3 Full Interrupt
-+#endif
-+ } bits;
-+} INTR_REG1_T;
-+
-+#define TOE_IQ3_FULL_INT_BIT BIT(31)
-+#define TOE_IQ2_FULL_INT_BIT BIT(30)
-+#define TOE_IQ1_FULL_INT_BIT BIT(29)
-+#define TOE_IQ0_FULL_INT_BIT BIT(28)
-+#define TOE_IQ3_INT_BIT BIT(27)
-+#define TOE_IQ2_INT_BIT BIT(26)
-+#define TOE_IQ1_INT_BIT BIT(25)
-+#define TOE_IQ0_INT_BIT BIT(24)
-+#define GMAC1_HWTQ13_EOF_INT_BIT BIT(23)
-+#define GMAC1_HWTQ12_EOF_INT_BIT BIT(22)
-+#define GMAC1_HWTQ11_EOF_INT_BIT BIT(21)
-+#define GMAC1_HWTQ10_EOF_INT_BIT BIT(20)
-+#define GMAC0_HWTQ03_EOF_INT_BIT BIT(19)
-+#define GMAC0_HWTQ02_EOF_INT_BIT BIT(18)
-+#define GMAC0_HWTQ01_EOF_INT_BIT BIT(17)
-+#define GMAC0_HWTQ00_EOF_INT_BIT BIT(16)
-+#define CLASS_RX_INT_BIT(x) BIT((x+2))
-+#define DEFAULT_Q1_INT_BIT BIT(1)
-+#define DEFAULT_Q0_INT_BIT BIT(0)
-+
-+#define TOE_IQ_INT_BITS (TOE_IQ0_INT_BIT | TOE_IQ1_INT_BIT | \
-+ TOE_IQ2_INT_BIT | TOE_IQ3_INT_BIT)
-+#define TOE_IQ_FULL_BITS (TOE_IQ0_FULL_INT_BIT | TOE_IQ1_FULL_INT_BIT | \
-+ TOE_IQ2_FULL_INT_BIT | TOE_IQ3_FULL_INT_BIT)
-+#define TOE_IQ_ALL_BITS (TOE_IQ_INT_BITS | TOE_IQ_FULL_BITS)
-+#define TOE_CLASS_RX_INT_BITS 0xfffc
-+
-+/**********************************************************************
-+ * Interrupt Status Register 2 (offset 0x0040)
-+ * Interrupt Mask Register 2 (offset 0x0044)
-+ * Interrupt Select Register 2 (offset 0x0048)
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_0040
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int toe_q31_full : 1; // bit 31 TOE Queue 31 Full Interrupt
-+ unsigned int toe_q30_full : 1; // bit 30 TOE Queue 30 Full Interrupt
-+ unsigned int toe_q29_full : 1; // bit 29 TOE Queue 29 Full Interrupt
-+ unsigned int toe_q28_full : 1; // bit 28 TOE Queue 28 Full Interrupt
-+ unsigned int toe_q27_full : 1; // bit 27 TOE Queue 27 Full Interrupt
-+ unsigned int toe_q26_full : 1; // bit 26 TOE Queue 26 Full Interrupt
-+ unsigned int toe_q25_full : 1; // bit 25 TOE Queue 25 Full Interrupt
-+ unsigned int toe_q24_full : 1; // bit 24 TOE Queue 24 Full Interrupt
-+ unsigned int toe_q23_full : 1; // bit 23 TOE Queue 23 Full Interrupt
-+ unsigned int toe_q22_full : 1; // bit 22 TOE Queue 22 Full Interrupt
-+ unsigned int toe_q21_full : 1; // bit 21 TOE Queue 21 Full Interrupt
-+ unsigned int toe_q20_full : 1; // bit 20 TOE Queue 20 Full Interrupt
-+ unsigned int toe_q19_full : 1; // bit 19 TOE Queue 19 Full Interrupt
-+ unsigned int toe_q18_full : 1; // bit 18 TOE Queue 18 Full Interrupt
-+ unsigned int toe_q17_full : 1; // bit 17 TOE Queue 17 Full Interrupt
-+ unsigned int toe_q16_full : 1; // bit 16 TOE Queue 16 Full Interrupt
-+ unsigned int toe_q15_full : 1; // bit 15 TOE Queue 15 Full Interrupt
-+ unsigned int toe_q14_full : 1; // bit 14 TOE Queue 14 Full Interrupt
-+ unsigned int toe_q13_full : 1; // bit 13 TOE Queue 13 Full Interrupt
-+ unsigned int toe_q12_full : 1; // bit 12 TOE Queue 12 Full Interrupt
-+ unsigned int toe_q11_full : 1; // bit 11 TOE Queue 11 Full Interrupt
-+ unsigned int toe_q10_full : 1; // bit 10 TOE Queue 10 Full Interrupt
-+ unsigned int toe_q9_full : 1; // bit 9 TOE Queue 9 Full Interrupt
-+ unsigned int toe_q8_full : 1; // bit 8 TOE Queue 8 Full Interrupt
-+ unsigned int toe_q7_full : 1; // bit 7 TOE Queue 7 Full Interrupt
-+ unsigned int toe_q6_full : 1; // bit 6 TOE Queue 6 Full Interrupt
-+ unsigned int toe_q5_full : 1; // bit 5 TOE Queue 5 Full Interrupt
-+ unsigned int toe_q4_full : 1; // bit 4 TOE Queue 4 Full Interrupt
-+ unsigned int toe_q3_full : 1; // bit 3 TOE Queue 3 Full Interrupt
-+ unsigned int toe_q2_full : 1; // bit 2 TOE Queue 2 Full Interrupt
-+ unsigned int toe_q1_full : 1; // bit 1 TOE Queue 1 Full Interrupt
-+ unsigned int toe_q0_full : 1; // bit 0 TOE Queue 0 Full Interrupt
-+#else
-+ unsigned int toe_q0_full : 1; // bit 0 TOE Queue 0 Full Interrupt
-+ unsigned int toe_q1_full : 1; // bit 1 TOE Queue 1 Full Interrupt
-+ unsigned int toe_q2_full : 1; // bit 2 TOE Queue 2 Full Interrupt
-+ unsigned int toe_q3_full : 1; // bit 3 TOE Queue 3 Full Interrupt
-+ unsigned int toe_q4_full : 1; // bit 4 TOE Queue 4 Full Interrupt
-+ unsigned int toe_q5_full : 1; // bit 5 TOE Queue 5 Full Interrupt
-+ unsigned int toe_q6_full : 1; // bit 6 TOE Queue 6 Full Interrupt
-+ unsigned int toe_q7_full : 1; // bit 7 TOE Queue 7 Full Interrupt
-+ unsigned int toe_q8_full : 1; // bit 8 TOE Queue 8 Full Interrupt
-+ unsigned int toe_q9_full : 1; // bit 9 TOE Queue 9 Full Interrupt
-+ unsigned int toe_q10_full : 1; // bit 10 TOE Queue 10 Full Interrupt
-+ unsigned int toe_q11_full : 1; // bit 11 TOE Queue 11 Full Interrupt
-+ unsigned int toe_q12_full : 1; // bit 12 TOE Queue 12 Full Interrupt
-+ unsigned int toe_q13_full : 1; // bit 13 TOE Queue 13 Full Interrupt
-+ unsigned int toe_q14_full : 1; // bit 14 TOE Queue 14 Full Interrupt
-+ unsigned int toe_q15_full : 1; // bit 15 TOE Queue 15 Full Interrupt
-+ unsigned int toe_q16_full : 1; // bit 16 TOE Queue 16 Full Interrupt
-+ unsigned int toe_q17_full : 1; // bit 17 TOE Queue 17 Full Interrupt
-+ unsigned int toe_q18_full : 1; // bit 18 TOE Queue 18 Full Interrupt
-+ unsigned int toe_q19_full : 1; // bit 19 TOE Queue 19 Full Interrupt
-+ unsigned int toe_q20_full : 1; // bit 20 TOE Queue 20 Full Interrupt
-+ unsigned int toe_q21_full : 1; // bit 21 TOE Queue 21 Full Interrupt
-+ unsigned int toe_q22_full : 1; // bit 22 TOE Queue 22 Full Interrupt
-+ unsigned int toe_q23_full : 1; // bit 23 TOE Queue 23 Full Interrupt
-+ unsigned int toe_q24_full : 1; // bit 24 TOE Queue 24 Full Interrupt
-+ unsigned int toe_q25_full : 1; // bit 25 TOE Queue 25 Full Interrupt
-+ unsigned int toe_q26_full : 1; // bit 26 TOE Queue 26 Full Interrupt
-+ unsigned int toe_q27_full : 1; // bit 27 TOE Queue 27 Full Interrupt
-+ unsigned int toe_q28_full : 1; // bit 28 TOE Queue 28 Full Interrupt
-+ unsigned int toe_q29_full : 1; // bit 29 TOE Queue 29 Full Interrupt
-+ unsigned int toe_q30_full : 1; // bit 30 TOE Queue 30 Full Interrupt
-+ unsigned int toe_q31_full : 1; // bit 31 TOE Queue 31 Full Interrupt
-+#endif
-+ } bits;
-+} INTR_REG2_T;
-+
-+#define TOE_QL_FULL_INT_BIT(x) BIT(x)
-+
-+/**********************************************************************
-+ * Interrupt Status Register 3 (offset 0x0050)
-+ * Interrupt Mask Register 3 (offset 0x0054)
-+ * Interrupt Select Register 3 (offset 0x0058)
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_0050
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int toe_q63_full : 1; // bit 63 TOE Queue 63 Full Interrupt
-+ unsigned int toe_q62_full : 1; // bit 62 TOE Queue 62 Full Interrupt
-+ unsigned int toe_q61_full : 1; // bit 61 TOE Queue 61 Full Interrupt
-+ unsigned int toe_q60_full : 1; // bit 60 TOE Queue 60 Full Interrupt
-+ unsigned int toe_q59_full : 1; // bit 59 TOE Queue 59 Full Interrupt
-+ unsigned int toe_q58_full : 1; // bit 58 TOE Queue 58 Full Interrupt
-+ unsigned int toe_q57_full : 1; // bit 57 TOE Queue 57 Full Interrupt
-+ unsigned int toe_q56_full : 1; // bit 56 TOE Queue 56 Full Interrupt
-+ unsigned int toe_q55_full : 1; // bit 55 TOE Queue 55 Full Interrupt
-+ unsigned int toe_q54_full : 1; // bit 54 TOE Queue 54 Full Interrupt
-+ unsigned int toe_q53_full : 1; // bit 53 TOE Queue 53 Full Interrupt
-+ unsigned int toe_q52_full : 1; // bit 52 TOE Queue 52 Full Interrupt
-+ unsigned int toe_q51_full : 1; // bit 51 TOE Queue 51 Full Interrupt
-+ unsigned int toe_q50_full : 1; // bit 50 TOE Queue 50 Full Interrupt
-+ unsigned int toe_q49_full : 1; // bit 49 TOE Queue 49 Full Interrupt
-+ unsigned int toe_q48_full : 1; // bit 48 TOE Queue 48 Full Interrupt
-+ unsigned int toe_q47_full : 1; // bit 47 TOE Queue 47 Full Interrupt
-+ unsigned int toe_q46_full : 1; // bit 46 TOE Queue 46 Full Interrupt
-+ unsigned int toe_q45_full : 1; // bit 45 TOE Queue 45 Full Interrupt
-+ unsigned int toe_q44_full : 1; // bit 44 TOE Queue 44 Full Interrupt
-+ unsigned int toe_q43_full : 1; // bit 43 TOE Queue 43 Full Interrupt
-+ unsigned int toe_q42_full : 1; // bit 42 TOE Queue 42 Full Interrupt
-+ unsigned int toe_q41_full : 1; // bit 41 TOE Queue 41 Full Interrupt
-+ unsigned int toe_q40_full : 1; // bit 40 TOE Queue 40 Full Interrupt
-+ unsigned int toe_q39_full : 1; // bit 39 TOE Queue 39 Full Interrupt
-+ unsigned int toe_q38_full : 1; // bit 38 TOE Queue 38 Full Interrupt
-+ unsigned int toe_q37_full : 1; // bit 37 TOE Queue 37 Full Interrupt
-+ unsigned int toe_q36_full : 1; // bit 36 TOE Queue 36 Full Interrupt
-+ unsigned int toe_q35_full : 1; // bit 35 TOE Queue 35 Full Interrupt
-+ unsigned int toe_q34_full : 1; // bit 34 TOE Queue 34 Full Interrupt
-+ unsigned int toe_q33_full : 1; // bit 33 TOE Queue 33 Full Interrupt
-+ unsigned int toe_q32_full : 1; // bit 32 TOE Queue 32 Full Interrupt
-+#else
-+ unsigned int toe_q32_full : 1; // bit 32 TOE Queue 32 Full Interrupt
-+ unsigned int toe_q33_full : 1; // bit 33 TOE Queue 33 Full Interrupt
-+ unsigned int toe_q34_full : 1; // bit 34 TOE Queue 34 Full Interrupt
-+ unsigned int toe_q35_full : 1; // bit 35 TOE Queue 35 Full Interrupt
-+ unsigned int toe_q36_full : 1; // bit 36 TOE Queue 36 Full Interrupt
-+ unsigned int toe_q37_full : 1; // bit 37 TOE Queue 37 Full Interrupt
-+ unsigned int toe_q38_full : 1; // bit 38 TOE Queue 38 Full Interrupt
-+ unsigned int toe_q39_full : 1; // bit 39 TOE Queue 39 Full Interrupt
-+ unsigned int toe_q40_full : 1; // bit 40 TOE Queue 40 Full Interrupt
-+ unsigned int toe_q41_full : 1; // bit 41 TOE Queue 41 Full Interrupt
-+ unsigned int toe_q42_full : 1; // bit 42 TOE Queue 42 Full Interrupt
-+ unsigned int toe_q43_full : 1; // bit 43 TOE Queue 43 Full Interrupt
-+ unsigned int toe_q44_full : 1; // bit 44 TOE Queue 44 Full Interrupt
-+ unsigned int toe_q45_full : 1; // bit 45 TOE Queue 45 Full Interrupt
-+ unsigned int toe_q46_full : 1; // bit 46 TOE Queue 46 Full Interrupt
-+ unsigned int toe_q47_full : 1; // bit 47 TOE Queue 47 Full Interrupt
-+ unsigned int toe_q48_full : 1; // bit 48 TOE Queue 48 Full Interrupt
-+ unsigned int toe_q49_full : 1; // bit 49 TOE Queue 49 Full Interrupt
-+ unsigned int toe_q50_full : 1; // bit 50 TOE Queue 50 Full Interrupt
-+ unsigned int toe_q51_full : 1; // bit 51 TOE Queue 51 Full Interrupt
-+ unsigned int toe_q52_full : 1; // bit 52 TOE Queue 52 Full Interrupt
-+ unsigned int toe_q53_full : 1; // bit 53 TOE Queue 53 Full Interrupt
-+ unsigned int toe_q54_full : 1; // bit 54 TOE Queue 54 Full Interrupt
-+ unsigned int toe_q55_full : 1; // bit 55 TOE Queue 55 Full Interrupt
-+ unsigned int toe_q56_full : 1; // bit 56 TOE Queue 56 Full Interrupt
-+ unsigned int toe_q57_full : 1; // bit 57 TOE Queue 57 Full Interrupt
-+ unsigned int toe_q58_full : 1; // bit 58 TOE Queue 58 Full Interrupt
-+ unsigned int toe_q59_full : 1; // bit 59 TOE Queue 59 Full Interrupt
-+ unsigned int toe_q60_full : 1; // bit 60 TOE Queue 60 Full Interrupt
-+ unsigned int toe_q61_full : 1; // bit 61 TOE Queue 61 Full Interrupt
-+ unsigned int toe_q62_full : 1; // bit 62 TOE Queue 62 Full Interrupt
-+ unsigned int toe_q63_full : 1; // bit 63 TOE Queue 63 Full Interrupt
-+#endif
-+ } bits;
-+} INTR_REG3_T;
-+
-+#define TOE_QH_FULL_INT_BIT(x) BIT(x-32)
-+
-+/**********************************************************************
-+ * Interrupt Status Register 4 (offset 0x0060)
-+ * Interrupt Mask Register 4 (offset 0x0064)
-+ * Interrupt Select Register 4 (offset 0x0068)
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned char byte;
-+ struct bit_0060
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned char reserved : 1; //
-+ unsigned char cnt_full : 1; // MIB counters half full interrupt
-+ unsigned char rx_pause_on : 1; // received pause on frame interrupt
-+ unsigned char tx_pause_on : 1; // transmit pause on frame interrupt
-+ unsigned char rx_pause_off : 1; // received pause off frame interrupt
-+ unsigned char tx_pause_off : 1; // received pause off frame interrupt
-+ unsigned char rx_overrun : 1; // GMAC Rx FIFO overrun interrupt
-+ unsigned char status_changed: 1; // Status Changed Intr for RGMII Mode
-+#else
-+ unsigned char status_changed: 1; // Status Changed Intr for RGMII Mode
-+ unsigned char rx_overrun : 1; // GMAC Rx FIFO overrun interrupt
-+ unsigned char tx_pause_off : 1; // received pause off frame interrupt
-+ unsigned char rx_pause_off : 1; // received pause off frame interrupt
-+ unsigned char tx_pause_on : 1; // transmit pause on frame interrupt
-+ unsigned char rx_pause_on : 1; // received pause on frame interrupt
-+ unsigned char cnt_full : 1; // MIB counters half full interrupt
-+ unsigned char reserved : 1; //
-+#endif
-+ } _PACKED_ bits;
-+} _PACKED_ GMAC_INTR_T;
-+
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_0060_2
-+ {
-+#if (BIG_ENDIAN==1)
-+ GMAC_INTR_T gmac1;
-+ GMAC_INTR_T gmac0;
-+ unsigned int class_qf_int: 14; // bit 15:2 Classification Rx Queue13-0 Full Intr.
-+ unsigned int hwfq_empty : 1; // bit 1 Hardware Free Queue Empty Intr.
-+ unsigned int swfq_empty : 1; // bit 0 Software Free Queue Empty Intr.
-+#else
-+#endif
-+ unsigned int swfq_empty : 1; // bit 0 Software Free Queue Empty Intr.
-+ unsigned int hwfq_empty : 1; // bit 1 Hardware Free Queue Empty Intr.
-+ unsigned int class_qf_int: 14; // bit 15:2 Classification Rx Queue13-0 Full Intr.
-+ GMAC_INTR_T gmac0;
-+ GMAC_INTR_T gmac1;
-+ } bits;
-+} INTR_REG4_T;
-+
-+#define GMAC1_RESERVED_INT_BIT BIT(31)
-+#define GMAC1_MIB_INT_BIT BIT(30)
-+#define GMAC1_RX_PAUSE_ON_INT_BIT BIT(29)
-+#define GMAC1_TX_PAUSE_ON_INT_BIT BIT(28)
-+#define GMAC1_RX_PAUSE_OFF_INT_BIT BIT(27)
-+#define GMAC1_TX_PAUSE_OFF_INT_BIT BIT(26)
-+#define GMAC1_RX_OVERRUN_INT_BIT BIT(25)
-+#define GMAC1_STATUS_CHANGE_INT_BIT BIT(24)
-+#define GMAC0_RESERVED_INT_BIT BIT(23)
-+#define GMAC0_MIB_INT_BIT BIT(22)
-+#define GMAC0_RX_PAUSE_ON_INT_BIT BIT(21)
-+#define GMAC0_TX_PAUSE_ON_INT_BIT BIT(20)
-+#define GMAC0_RX_PAUSE_OFF_INT_BIT BIT(19)
-+#define GMAC0_TX_PAUSE_OFF_INT_BIT BIT(18)
-+#define GMAC0_RX_OVERRUN_INT_BIT BIT(17)
-+#define GMAC0_STATUS_CHANGE_INT_BIT BIT(16)
-+#define CLASS_RX_FULL_INT_BIT(x) BIT((x+2))
-+#define HWFQ_EMPTY_INT_BIT BIT(1)
-+#define SWFQ_EMPTY_INT_BIT BIT(0)
-+
-+#if 1
-+#define GMAC0_INT_BITS (GMAC0_MIB_INT_BIT)
-+#define GMAC1_INT_BITS (GMAC1_MIB_INT_BIT)
-+#else
-+#define GMAC0_INT_BITS (GMAC0_RESERVED_INT_BIT | GMAC0_MIB_INT_BIT | \
-+ GMAC0_RX_PAUSE_ON_INT_BIT | GMAC0_TX_PAUSE_ON_INT_BIT | \
-+ GMAC0_RX_PAUSE_OFF_INT_BIT | GMAC0_TX_PAUSE_OFF_INT_BIT | \
-+ GMAC0_RX_OVERRUN_INT_BIT | GMAC0_STATUS_CHANGE_INT_BIT)
-+#define GMAC1_INT_BITS (GMAC1_RESERVED_INT_BIT | GMAC1_MIB_INT_BIT | \
-+ GMAC1_RX_PAUSE_ON_INT_BIT | GMAC1_TX_PAUSE_ON_INT_BIT | \
-+ GMAC1_RX_PAUSE_OFF_INT_BIT | GMAC1_TX_PAUSE_OFF_INT_BIT | \
-+ GMAC1_RX_OVERRUN_INT_BIT | GMAC1_STATUS_CHANGE_INT_BIT)
-+#endif
-+
-+#define CLASS_RX_FULL_INT_BITS 0xfffc
-+
-+/**********************************************************************
-+ * GLOBAL_QUEUE_THRESHOLD_REG (offset 0x0070)
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_0070_2
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int toe_class : 8; // 31:24
-+ unsigned int intrq : 8; // 23:16
-+ unsigned int hwfq_empty : 8; // 15:8 Hardware Free Queue Empty Threshold
-+ unsigned int swfq_empty : 8; // 7:0 Software Free Queue Empty Threshold
-+#else
-+#endif
-+ unsigned int swfq_empty : 8; // 7:0 Software Free Queue Empty Threshold
-+ unsigned int hwfq_empty : 8; // 15:8 Hardware Free Queue Empty Threshold
-+ unsigned int intrq : 8; // 23:16
-+ unsigned int toe_class : 8; // 31:24
-+ } bits;
-+} QUEUE_THRESHOLD_T;
-+
-+
-+/**********************************************************************
-+ * GMAC DMA Control Register
-+ * GMAC0 offset 0x8000
-+ * GMAC1 offset 0xC000
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_8000
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int rd_enable : 1; // bit 31 Rx DMA Enable
-+ unsigned int td_enable : 1; // bit 30 Tx DMA Enable
-+ unsigned int loopback : 1; // bit 29 Loopback TxDMA to RxDMA
-+ unsigned int drop_small_ack : 1; // bit 28 1: Drop, 0: Accept
-+ unsigned int reserved : 10; // bit 27:18
-+ unsigned int rd_insert_bytes : 2; // bit 17:16
-+ unsigned int rd_prot : 4; // bit 15:12 DMA Protection Control
-+ unsigned int rd_burst_size : 2; // bit 11:10 DMA max burst size for every AHB request
-+ unsigned int rd_bus : 2; // bit 9:8 Peripheral Bus Width
-+ unsigned int td_prot : 4; // bit 7:4 TxDMA protection control
-+ unsigned int td_burst_size : 2; // bit 3:2 TxDMA max burst size for every AHB request
-+ unsigned int td_bus : 2; // bit 1:0 Peripheral Bus Width
-+#else
-+ unsigned int td_bus : 2; // bit 1:0 Peripheral Bus Width
-+ unsigned int td_burst_size : 2; // bit 3:2 TxDMA max burst size for every AHB request
-+ unsigned int td_prot : 4; // bit 7:4 TxDMA protection control
-+ unsigned int rd_bus : 2; // bit 9:8 Peripheral Bus Width
-+ unsigned int rd_burst_size : 2; // bit 11:10 DMA max burst size for every AHB request
-+ unsigned int rd_prot : 4; // bit 15:12 DMA Protection Control
-+ unsigned int rd_insert_bytes : 2; // bit 17:16
-+ unsigned int reserved : 10; // bit 27:18
-+ unsigned int drop_small_ack : 1; // bit 28 1: Drop, 0: Accept
-+ unsigned int loopback : 1; // bit 29 Loopback TxDMA to RxDMA
-+ unsigned int td_enable : 1; // bit 30 Tx DMA Enable
-+ unsigned int rd_enable : 1; // bit 31 Rx DMA Enable
-+#endif
-+ } bits;
-+} GMAC_DMA_CTRL_T;
-+
-+/**********************************************************************
-+ * GMAC Tx Weighting Control Register 0
-+ * GMAC0 offset 0x8004
-+ * GMAC1 offset 0xC004
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_8004
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int reserved : 8; // bit 31:24
-+ unsigned int hw_tq3 : 6; // bit 23:18 HW TX Queue 0
-+ unsigned int hw_tq2 : 6; // bit 17:12 HW TX Queue 1
-+ unsigned int hw_tq1 : 6; // bit 11:6 HW TX Queue 2
-+ unsigned int hw_tq0 : 6; // bit 5:0 HW TX Queue 3
-+#else
-+ unsigned int hw_tq0 : 6; // bit 5:0 HW TX Queue 3
-+ unsigned int hw_tq1 : 6; // bit 11:6 HW TX Queue 2
-+ unsigned int hw_tq2 : 6; // bit 17:12 HW TX Queue 1
-+ unsigned int hw_tq3 : 6; // bit 23:18 HW TX Queue 0
-+ unsigned int reserved : 8; // bit 31:24
-+#endif
-+ } bits;
-+} GMAC_TX_WCR0_T; // Weighting Control Register 0
-+
-+/**********************************************************************
-+ * GMAC Tx Weighting Control Register 1
-+ * GMAC0 offset 0x8008
-+ * GMAC1 offset 0xC008
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_8008
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int reserved : 2; // bit 31:30
-+ unsigned int sw_tq5 : 5; // bit 29:25 SW TX Queue 5
-+ unsigned int sw_tq4 : 5; // bit 24:20 SW TX Queue 4
-+ unsigned int sw_tq3 : 5; // bit 19:15 SW TX Queue 3
-+ unsigned int sw_tq2 : 5; // bit 14:10 SW TX Queue 2
-+ unsigned int sw_tq1 : 5; // bit 9:5 SW TX Queue 1
-+ unsigned int sw_tq0 : 5; // bit 4:0 SW TX Queue 0
-+#else
-+ unsigned int sw_tq0 : 5; // bit 4:0 SW TX Queue 0
-+ unsigned int sw_tq1 : 5; // bit 9:5 SW TX Queue 1
-+ unsigned int sw_tq2 : 5; // bit 14:10 SW TX Queue 2
-+ unsigned int sw_tq3 : 5; // bit 19:15 SW TX Queue 3
-+ unsigned int sw_tq4 : 5; // bit 24:20 SW TX Queue 4
-+ unsigned int sw_tq5 : 5; // bit 29:25 SW TX Queue 5
-+ unsigned int reserved : 2; // bit 31:30
-+#endif
-+ } bits;
-+} GMAC_TX_WCR1_T; // Weighting Control Register 1
-+
-+/**********************************************************************
-+ * Queue Read/Write Pointer
-+ * GMAC SW TX Queue 0~5 Read/Write Pointer register
-+ * GMAC0 offset 0x800C ~ 0x8020
-+ * GMAC1 offset 0xC00C ~ 0xC020
-+ * GMAC HW TX Queue 0~3 Read/Write Pointer register
-+ * GMAC0 offset 0x8024 ~ 0x8030
-+ * GMAC1 offset 0xC024 ~ 0xC030
-+ **********************************************************************/
-+// see DMA_RWPTR_T structure
-+
-+/**********************************************************************
-+ * GMAC DMA Tx First Description Address Register
-+ * GMAC0 offset 0x8038
-+ * GMAC1 offset 0xC038
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_8038
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int td_first_des_ptr : 28; // bit 31:4 first descriptor address
-+ unsigned int td_busy : 1; // bit 3 1: TxDMA busy; 0: TxDMA idle
-+ unsigned int reserved : 3;
-+#else
-+ unsigned int reserved : 3;
-+ unsigned int td_busy : 1; // bit 3 1: TxDMA busy; 0: TxDMA idle
-+ unsigned int td_first_des_ptr : 28; // bit 31:4 first descriptor address
-+#endif
-+ } bits;
-+} GMAC_TXDMA_FIRST_DESC_T;
-+
-+/**********************************************************************
-+ * GMAC DMA Tx Current Description Address Register
-+ * GMAC0 offset 0x803C
-+ * GMAC1 offset 0xC03C
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_803C
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int td_curr_desc_ptr : 28; // bit 31:4 current descriptor address
-+ unsigned int reserved : 4;
-+#else
-+ unsigned int reserved : 4;
-+ unsigned int td_curr_desc_ptr : 28; // bit 31:4 current descriptor address
-+#endif
-+ } bits;
-+} GMAC_TXDMA_CURR_DESC_T;
-+
-+/**********************************************************************
-+ * GMAC DMA Tx Description Word 0 Register
-+ * GMAC0 offset 0x8040
-+ * GMAC1 offset 0xC040
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_8040
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int reserved : 1; // bit 31
-+ unsigned int derr : 1; // bit 30 data error during processing this descriptor
-+ unsigned int perr : 1; // bit 29 protocol error during processing this descriptor
-+ unsigned int status_rvd : 6; // bit 28:23 Tx Status, Reserved bits
-+ unsigned int status_tx_ok : 1; // bit 22 Tx Status, 1: Successful 0: Failed
-+ unsigned int desc_count : 6; // bit 21:16 number of descriptors used for the current frame
-+ unsigned int buffer_size : 16; // bit 15:0 Transfer size
-+#else
-+ unsigned int buffer_size : 16; // bit 15:0 Transfer size
-+ unsigned int desc_count : 6; // bit 21:16 number of descriptors used for the current frame
-+ unsigned int status_tx_ok : 1; // bit 22 Tx Status, 1: Successful 0: Failed
-+ unsigned int status_rvd : 6; // bit 28:23 Tx Status, Reserved bits
-+ unsigned int perr : 1; // bit 29 protocol error during processing this descriptor
-+ unsigned int derr : 1; // bit 30 data error during processing this descriptor
-+ unsigned int reserved : 1; // bit 31
-+#endif
-+ } bits;
-+} GMAC_TXDESC_0_T;
-+
-+/**********************************************************************
-+ * GMAC DMA Tx Description Word 1 Register
-+ * GMAC0 offset 0x8044
-+ * GMAC1 offset 0xC044
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct txdesc_word1
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int reserved : 9; // bit 31:23 Tx Flag, Reserved
-+ unsigned int ip_fixed_len: 1; // bit 22
-+ unsigned int bypass_tss : 1; // bit 21
-+ unsigned int udp_chksum : 1; // bit 20 UDP Checksum Enable
-+ unsigned int tcp_chksum : 1; // bit 19 TCP Checksum Enable
-+ unsigned int ipv6_enable : 1; // bit 18 IPV6 Tx Enable
-+ unsigned int ip_chksum : 1; // bit 17 IPV4 Header Checksum Enable
-+ unsigned int mtu_enable : 1; // bit 16 TSS segmentation use MTU setting
-+ unsigned int byte_count : 16; // bit 15: 0 Tx Frame Byte Count
-+#else
-+ unsigned int byte_count : 16; // bit 15: 0 Tx Frame Byte Count
-+ unsigned int mtu_enable : 1; // bit 16 TSS segmentation use MTU setting
-+ unsigned int ip_chksum : 1; // bit 17 IPV4 Header Checksum Enable
-+ unsigned int ipv6_enable : 1; // bit 18 IPV6 Tx Enable
-+ unsigned int tcp_chksum : 1; // bit 19 TCP Checksum Enable
-+ unsigned int udp_chksum : 1; // bit 20 UDP Checksum Enable
-+ unsigned int bypass_tss : 1; // bit 21
-+ unsigned int ip_fixed_len: 1; // bit 22
-+ unsigned int reserved : 9; // bit 31:23 Tx Flag, Reserved
-+#endif
-+ } bits;
-+} GMAC_TXDESC_1_T;
-+
-+#define TSS_IP_FIXED_LEN_BIT BIT(22)
-+#define TSS_UDP_CHKSUM_BIT BIT(20)
-+#define TSS_TCP_CHKSUM_BIT BIT(19)
-+#define TSS_IPV6_ENABLE_BIT BIT(18)
-+#define TSS_IP_CHKSUM_BIT BIT(17)
-+#define TSS_MTU_ENABLE_BIT BIT(16)
-+
-+/**********************************************************************
-+ * GMAC DMA Tx Description Word 2 Register
-+ * GMAC0 offset 0x8048
-+ * GMAC1 offset 0xC048
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ unsigned int buf_adr;
-+} GMAC_TXDESC_2_T;
-+
-+/**********************************************************************
-+ * GMAC DMA Tx Description Word 3 Register
-+ * GMAC0 offset 0x804C
-+ * GMAC1 offset 0xC04C
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct txdesc_word3
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int sof_eof : 2; // bit 31:30 11: only one, 10: first, 01: last, 00: linking
-+ unsigned int eofie : 1; // bit 29 End of frame interrupt enable
-+ unsigned int reserved : 18; // bit 28:11
-+ unsigned int mtu_size : 11; // bit 10: 0 Tx Frame Byte Count
-+#else
-+ unsigned int mtu_size : 11; // bit 10: 0 Tx Frame Byte Count
-+ unsigned int reserved : 18; // bit 28:11
-+ unsigned int eofie : 1; // bit 29 End of frame interrupt enable
-+ unsigned int sof_eof : 2; // bit 31:30 11: only one, 10: first, 01: last, 00: linking
-+#endif
-+ } bits;
-+} GMAC_TXDESC_3_T;
-+#define SOF_EOF_BIT_MASK 0x3fffffff
-+#define SOF_BIT 0x80000000
-+#define EOF_BIT 0x40000000
-+#define EOFIE_BIT BIT(29)
-+#define MTU_SIZE_BIT_MASK 0x7ff
-+
-+/**********************************************************************
-+ * GMAC Tx Descriptor
-+ **********************************************************************/
-+typedef struct
-+{
-+ GMAC_TXDESC_0_T word0;
-+ GMAC_TXDESC_1_T word1;
-+ GMAC_TXDESC_2_T word2;
-+ GMAC_TXDESC_3_T word3;
-+} GMAC_TXDESC_T;
-+
-+
-+/**********************************************************************
-+ * GMAC DMA Rx First Description Address Register
-+ * GMAC0 offset 0x8058
-+ * GMAC1 offset 0xC058
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_8058
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int rd_first_des_ptr : 28; // bit 31:4 first descriptor address
-+ unsigned int rd_busy : 1; // bit 3 1-RxDMA busy; 0-RxDMA idle
-+ unsigned int reserved : 3; // bit 2:0
-+#else
-+ unsigned int reserved : 3; // bit 2:0
-+ unsigned int rd_busy : 1; // bit 3 1-RxDMA busy; 0-RxDMA idle
-+ unsigned int rd_first_des_ptr : 28; // bit 31:4 first descriptor address
-+#endif
-+ } bits;
-+} GMAC_RXDMA_FIRST_DESC_T;
-+
-+/**********************************************************************
-+ * GMAC DMA Rx Current Description Address Register
-+ * GMAC0 offset 0x805C
-+ * GMAC1 offset 0xC05C
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_805C
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int rd_curr_des_ptr : 28; // bit 31:4 current descriptor address
-+ unsigned int reserved : 4; // bit 3:0
-+#else
-+ unsigned int reserved : 4; // bit 3:0
-+ unsigned int rd_curr_des_ptr : 28; // bit 31:4 current descriptor address
-+#endif
-+ } bits;
-+} GMAC_RXDMA_CURR_DESC_T;
-+
-+/**********************************************************************
-+ * GMAC DMA Rx Description Word 0 Register
-+ * GMAC0 offset 0x8060
-+ * GMAC1 offset 0xC060
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_8060
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int drop : 1; // bit 31 TOE/CIS Queue Full dropped packet to default queue
-+ unsigned int derr : 1; // bit 30 data error during processing this descriptor
-+ unsigned int perr : 1; // bit 29 protocol error during processing this descriptor
-+ unsigned int chksum_status : 3; // bit 28:26 Check Sum Status
-+ unsigned int status : 4; // bit 24:22 Status of rx frame
-+ unsigned int desc_count : 6; // bit 21:16 number of descriptors used for the current frame
-+ unsigned int buffer_size : 16; // bit 15:0 number of descriptors used for the current frame
-+#else
-+ unsigned int buffer_size : 16; // bit 15:0 number of descriptors used for the current frame
-+ unsigned int desc_count : 6; // bit 21:16 number of descriptors used for the current frame
-+ unsigned int status : 4; // bit 24:22 Status of rx frame
-+ unsigned int chksum_status : 3; // bit 28:26 Check Sum Status
-+ unsigned int perr : 1; // bit 29 protocol error during processing this descriptor
-+ unsigned int derr : 1; // bit 30 data error during processing this descriptor
-+ unsigned int drop : 1; // bit 31 TOE/CIS Queue Full dropped packet to default queue
-+#endif
-+ } bits;
-+} GMAC_RXDESC_0_T;
-+
-+#define GMAC_RXDESC_0_T_derr BIT(30)
-+#define GMAC_RXDESC_0_T_perr BIT(29)
-+#define GMAC_RXDESC_0_T_chksum_status(x) BIT((x+26))
-+#define GMAC_RXDESC_0_T_status(x) BIT((x+22))
-+#define GMAC_RXDESC_0_T_desc_count(x) BIT((x+16))
-+
-+#define RX_CHKSUM_IP_UDP_TCP_OK 0
-+#define RX_CHKSUM_IP_OK_ONLY 1
-+#define RX_CHKSUM_NONE 2
-+#define RX_CHKSUM_IP_ERR_UNKNOWN 4
-+#define RX_CHKSUM_IP_ERR 5
-+#define RX_CHKSUM_TCP_UDP_ERR 6
-+#define RX_CHKSUM_NUM 8
-+
-+#define RX_STATUS_GOOD_FRAME 0
-+#define RX_STATUS_TOO_LONG_GOOD_CRC 1
-+#define RX_STATUS_RUNT_FRAME 2
-+#define RX_STATUS_SFD_NOT_FOUND 3
-+#define RX_STATUS_CRC_ERROR 4
-+#define RX_STATUS_TOO_LONG_BAD_CRC 5
-+#define RX_STATUS_ALIGNMENT_ERROR 6
-+#define RX_STATUS_TOO_LONG_BAD_ALIGN 7
-+#define RX_STATUS_RX_ERR 8
-+#define RX_STATUS_DA_FILTERED 9
-+#define RX_STATUS_BUFFER_FULL 10
-+#define RX_STATUS_NUM 16
-+
-+
-+/**********************************************************************
-+ * GMAC DMA Rx Description Word 1 Register
-+ * GMAC0 offset 0x8064
-+ * GMAC1 offset 0xC064
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct rxdesc_word1
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int sw_id : 16; // bit 31:16 Software ID
-+ unsigned int byte_count : 16; // bit 15: 0 Rx Frame Byte Count
-+#else
-+ unsigned int byte_count : 16; // bit 15: 0 Rx Frame Byte Count
-+ unsigned int sw_id : 16; // bit 31:16 Software ID
-+#endif
-+ } bits;
-+} GMAC_RXDESC_1_T;
-+
-+/**********************************************************************
-+ * GMAC DMA Rx Description Word 2 Register
-+ * GMAC0 offset 0x8068
-+ * GMAC1 offset 0xC068
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ unsigned int buf_adr;
-+} GMAC_RXDESC_2_T;
-+
-+#define RX_INSERT_NONE 0
-+#define RX_INSERT_1_BYTE 1
-+#define RX_INSERT_2_BYTE 2
-+#define RX_INSERT_3_BYTE 3
-+
-+#define RX_INSERT_BYTES RX_INSERT_2_BYTE
-+/**********************************************************************
-+ * GMAC DMA Rx Description Word 3 Register
-+ * GMAC0 offset 0x806C
-+ * GMAC1 offset 0xC06C
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct rxdesc_word3
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int sof_eof : 2; // bit 31:30 11: only one, 10: first, 01: last, 00: linking
-+ unsigned int eofie : 1; // bit 29 End of frame interrupt enable
-+ unsigned int ctrl_flag : 1; // bit 28 Control Flag is present
-+ unsigned int out_of_seq : 1; // bit 27 Out of Sequence packet
-+ unsigned int option : 1; // bit 26 IPV4 option or IPV6 extension header
-+ unsigned int abnormal : 1; // bit 25 abnormal case found
-+ unsigned int dup_ack : 1; // bit 24 Duplicated ACK detected
-+ unsigned int l7_offset : 8; // bit 23: 16 L7 data offset
-+ unsigned int l4_offset : 8; // bit 15: 8 L4 data offset
-+ unsigned int l3_offset : 8; // bit 7: 0 L3 data offset
-+#else
-+ unsigned int l3_offset : 8; // bit 7: 0 L3 data offset
-+ unsigned int l4_offset : 8; // bit 15: 8 L4 data offset
-+ unsigned int l7_offset : 8; // bit 23: 16 L7 data offset
-+ unsigned int dup_ack : 1; // bit 24 Duplicated ACK detected
-+ unsigned int abnormal : 1; // bit 25 abnormal case found
-+ unsigned int option : 1; // bit 26 IPV4 option or IPV6 extension header
-+ unsigned int out_of_seq : 1; // bit 27 Out of Sequence packet
-+ unsigned int ctrl_flag : 1; // bit 28 Control Flag is present
-+ unsigned int eofie : 1; // bit 29 End of frame interrupt enable
-+ unsigned int sof_eof : 2; // bit 31:30 11: only one, 10: first, 01: last, 00: linking
-+#endif
-+ } bits;
-+} GMAC_RXDESC_3_T;
-+
-+/**********************************************************************
-+ * GMAC Rx Descriptor
-+ **********************************************************************/
-+typedef struct
-+{
-+ GMAC_RXDESC_0_T word0;
-+ GMAC_RXDESC_1_T word1;
-+ GMAC_RXDESC_2_T word2;
-+ GMAC_RXDESC_3_T word3;
-+} GMAC_RXDESC_T;
-+
-+/**********************************************************************
-+ * GMAC Hash Engine Enable/Action Register 0 Offset Register
-+ * GMAC0 offset 0x8070
-+ * GMAC1 offset 0xC070
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_8070
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int mr1en : 1; // bit 31 Enable Matching Rule 1
-+ unsigned int reserved1 : 1; // bit 30
-+ unsigned int timing : 3; // bit 29:27
-+ unsigned int mr1_action : 5; // bit 26:22 Matching Rule 1 action offset
-+ unsigned int mr1hel : 6; // bit 21:16 match rule 1 hash entry size
-+ unsigned int mr0en : 1; // bit 15 Enable Matching Rule 0
-+ unsigned int reserved0 : 4; // bit 14:11
-+ unsigned int mr0_action : 5; // bit 10:6 Matching Rule 0 action offset
-+ unsigned int mr0hel : 6; // bit 5:0 match rule 0 hash entry size
-+#else
-+ unsigned int mr0hel : 6; // bit 5:0 match rule 0 hash entry size
-+ unsigned int mr0_action : 5; // bit 10:6 Matching Rule 0 action offset
-+ unsigned int reserved0 : 4; // bit 14:11
-+ unsigned int mr0en : 1; // bit 15 Enable Matching Rule 0
-+ unsigned int mr1hel : 6; // bit 21:16 match rule 1 hash entry size
-+ unsigned int mr1_action : 5; // bit 26:22 Matching Rule 1 action offset
-+ unsigned int timing : 3; // bit 29:27
-+ unsigned int reserved1 : 1; // bit 30
-+ unsigned int mr1en : 1; // bit 31 Enable Matching Rule 1
-+#endif
-+ } bits;
-+} GMAC_HASH_ENABLE_REG0_T;
-+
-+/**********************************************************************
-+ * GMAC Hash Engine Enable/Action Register 1 Offset Register
-+ * GMAC0 offset 0x8074
-+ * GMAC1 offset 0xC074
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_8074
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int mr3en : 1; // bit 31 Enable Matching Rule 3
-+ unsigned int reserved3 : 4; // bit 30:27
-+ unsigned int mr3_action : 5; // bit 26:22 Matching Rule 3 action offset
-+ unsigned int mr3hel : 6; // bit 21:16 match rule 3 hash entry size
-+ unsigned int mr2en : 1; // bit 15 Enable Matching Rule 2
-+ unsigned int reserved2 : 4; // bit 14:11
-+ unsigned int mr2_action : 5; // bit 10:6 Matching Rule 2 action offset
-+ unsigned int mr2hel : 6; // bit 5:0 match rule 2 hash entry size
-+#else
-+ unsigned int mr2hel : 6; // bit 5:0 match rule 2 hash entry size
-+ unsigned int mr2_action : 5; // bit 10:6 Matching Rule 2 action offset
-+ unsigned int reserved2 : 4; // bit 14:11
-+ unsigned int mr2en : 1; // bit 15 Enable Matching Rule 2
-+ unsigned int mr3hel : 6; // bit 21:16 match rule 3 hash entry size
-+ unsigned int mr3_action : 5; // bit 26:22 Matching Rule 3 action offset
-+ unsigned int reserved1 : 4; // bit 30:27
-+ unsigned int mr3en : 1; // bit 31 Enable Matching Rule 3
-+#endif
-+ } bits;
-+} GMAC_HASH_ENABLE_REG1_T;
-+
-+
-+/**********************************************************************
-+ * GMAC Matching Rule Control Register 0
-+ * GMAC0 offset 0x8078
-+ * GMAC1 offset 0xC078
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_8078
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int l2 : 1; // bit 31 L2 matching enable
-+ unsigned int l3 : 1; // bit 30 L3 matching enable
-+ unsigned int l4 : 1; // bit 29 L4 matching enable
-+ unsigned int l7 : 1; // bit 28 L7 matching enable
-+ unsigned int port : 1; // bit 27 PORT ID matching enable
-+ unsigned int priority : 3; // bit 26:24 priority if multi-rules matched
-+ unsigned int da : 1; // bit 23 MAC DA enable
-+ unsigned int sa : 1; // bit 22 MAC SA enable
-+ unsigned int ether_type : 1; // bit 21 Ethernet type enable
-+ unsigned int vlan : 1; // bit 20 VLAN ID enable
-+ unsigned int pppoe : 1; // bit 19 PPPoE Session ID enable
-+ unsigned int reserved1 : 3; // bit 18:16
-+ unsigned int ip_version : 1; // bit 15 0: IPV4, 1: IPV6
-+ unsigned int ip_hdr_len : 1; // bit 14 IPV4 Header length
-+ unsigned int flow_lable : 1; // bit 13 IPV6 Flow label
-+ unsigned int tos_traffic : 1; // bit 12 IPV4 TOS or IPV6 Traffice Class
-+ unsigned int reserved2 : 4; // bit 11:8
-+ unsigned int sprx : 8; // bit 7:0 Support Protocol Register 7:0
-+#else
-+ unsigned int sprx : 8; // bit 7:0 Support Protocol Register 7:0
-+ unsigned int reserved2 : 4; // bit 11:8
-+ unsigned int tos_traffic : 1; // bit 12 IPV4 TOS or IPV6 Traffice Class
-+ unsigned int flow_lable : 1; // bit 13 IPV6 Flow label
-+ unsigned int ip_hdr_len : 1; // bit 14 IPV4 Header length
-+ unsigned int ip_version : 1; // bit 15 0: IPV4, 1: IPV6
-+ unsigned int reserved1 : 3; // bit 18:16
-+ unsigned int pppoe : 1; // bit 19 PPPoE Session ID enable
-+ unsigned int vlan : 1; // bit 20 VLAN ID enable
-+ unsigned int ether_type : 1; // bit 21 Ethernet type enable
-+ unsigned int sa : 1; // bit 22 MAC SA enable
-+ unsigned int da : 1; // bit 23 MAC DA enable
-+ unsigned int priority : 3; // bit 26:24 priority if multi-rules matched
-+ unsigned int port : 1; // bit 27 PORT ID matching enable
-+ unsigned int l7 : 1; // bit 28 L7 matching enable
-+ unsigned int l4 : 1; // bit 29 L4 matching enable
-+ unsigned int l3 : 1; // bit 30 L3 matching enable
-+ unsigned int l2 : 1; // bit 31 L2 matching enable
-+#endif
-+ } bits;
-+} GMAC_MRxCR0_T;
-+
-+#define MR_L2_BIT BIT(31)
-+#define MR_L3_BIT BIT(30)
-+#define MR_L4_BIT BIT(29)
-+#define MR_L7_BIT BIT(28)
-+#define MR_PORT_BIT BIT(27)
-+#define MR_PRIORITY_BIT BIT(26)
-+#define MR_DA_BIT BIT(23)
-+#define MR_SA_BIT BIT(22)
-+#define MR_ETHER_TYPE_BIT BIT(21)
-+#define MR_VLAN_BIT BIT(20)
-+#define MR_PPPOE_BIT BIT(19)
-+#define MR_IP_VER_BIT BIT(15)
-+#define MR_IP_HDR_LEN_BIT BIT(14)
-+#define MR_FLOW_LABLE_BIT BIT(13)
-+#define MR_TOS_TRAFFIC_BIT BIT(12)
-+#define MR_SPR_BIT(x) BIT(x)
-+#define MR_SPR_BITS 0xff
-+
-+/**********************************************************************
-+ * GMAC Matching Rule Control Register 1
-+ * GMAC0 offset 0x807C
-+ * GMAC1 offset 0xC07C
-+ **********************************************************************/
-+ typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_807C
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int sip : 1; // bit 31 Srce IP
-+ unsigned int sip_netmask : 7; // bit 30:24 Srce IP net mask, number of mask bits
-+ unsigned int dip : 1; // bit 23 Dest IP
-+ unsigned int dip_netmask : 7; // bit 22:16 Dest IP net mask, number of mask bits
-+ unsigned int l4_byte0_15 : 16; // bit 15: 0
-+#else
-+ unsigned int l4_byte0_15 : 16; // bit 15: 0
-+ unsigned int dip_netmask : 7; // bit 22:16 Dest IP net mask, number of mask bits
-+ unsigned int dip : 1; // bit 23 Dest IP
-+ unsigned int sip_netmask : 7; // bit 30:24 Srce IP net mask, number of mask bits
-+ unsigned int sip : 1; // bit 31 Srce IP
-+#endif
-+ } bits;
-+} GMAC_MRxCR1_T;
-+
-+/**********************************************************************
-+ * GMAC Matching Rule Control Register 2
-+ * GMAC0 offset 0x8080
-+ * GMAC1 offset 0xC080
-+ **********************************************************************/
-+ typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_8080
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int l4_byte16_24: 8; // bit 31: 24
-+ unsigned int l7_byte0_23 : 24; // bit 23:0
-+#else
-+ unsigned int l7_byte0_23 : 24; // bit 23:0
-+ unsigned int l4_byte16_24: 8; // bit 31: 24
-+#endif
-+ } bits;
-+} GMAC_MRxCR2_T;
-+
-+
-+/**********************************************************************
-+ * GMAC Support registers
-+ * GMAC0 offset 0x80A8
-+ * GMAC1 offset 0xC0A8
-+ **********************************************************************/
-+ typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_80A8
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int reserved: 21; // bit 31:11
-+ unsigned int swap : 3; // bit 10:8 Swap
-+ unsigned int protocol: 8; // bit 7:0 Supported protocol
-+#else
-+ unsigned int protocol: 8; // bit 7:0 Supported protocol
-+ unsigned int swap : 3; // bit 10:8 Swap
-+ unsigned int reserved: 21; // bit 31:11
-+#endif
-+ } bits;
-+} GMAC_SPR_T;
-+
-+/**********************************************************************
-+ * GMAC_AHB_WEIGHT registers
-+ * GMAC0 offset 0x80C8
-+ * GMAC1 offset 0xC0C8
-+ **********************************************************************/
-+ typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_80C8
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int reserved : 7; // 31:25
-+ unsigned int tqDV_threshold : 5; // 24:20 DMA TqCtrl to Start tqDV FIFO Threshold
-+ unsigned int pre_req : 5; // 19:15 Rx Data Pre Request FIFO Threshold
-+ unsigned int tx_weight : 5; // 14:10
-+ unsigned int rx_weight : 5; // 9:5
-+ unsigned int hash_weight : 5; // 4:0
-+#else
-+ unsigned int hash_weight : 5; // 4:0
-+ unsigned int rx_weight : 5; // 9:5
-+ unsigned int tx_weight : 5; // 14:10
-+ unsigned int pre_req : 5; // 19:15 Rx Data Pre Request FIFO Threshold
-+ unsigned int tqDV_threshold : 5; // 24:20 DMA TqCtrl to Start tqDV FIFO Threshold
-+ unsigned int reserved : 7; // 31:25
-+#endif
-+ } bits;
-+} GMAC_AHB_WEIGHT_T;
-+/**********************************************************************
-+ * the register structure of GMAC
-+ **********************************************************************/
-+
-+/**********************************************************************
-+ * GMAC RX FLTR
-+ * GMAC0 Offset 0xA00C
-+ * GMAC1 Offset 0xE00C
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit1_000c
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int : 27;
-+ unsigned int error : 1; /* enable receive of all error frames */
-+ unsigned int promiscuous : 1; /* enable receive of all frames */
-+ unsigned int broadcast : 1; /* enable receive of broadcast frames */
-+ unsigned int multicast : 1; /* enable receive of multicast frames that pass multicast filter */
-+ unsigned int unicast : 1; /* enable receive of unicast frames that are sent to STA address */
-+#else
-+ unsigned int unicast : 1; /* enable receive of unicast frames that are sent to STA address */
-+ unsigned int multicast : 1; /* enable receive of multicast frames that pass multicast filter */
-+ unsigned int broadcast : 1; /* enable receive of broadcast frames */
-+ unsigned int promiscuous : 1; /* enable receive of all frames */
-+ unsigned int error : 1; /* enable receive of all error frames */
-+ unsigned int : 27;
-+#endif
-+ } bits;
-+} GMAC_RX_FLTR_T;
-+
-+/**********************************************************************
-+ * GMAC Configuration 0
-+ * GMAC0 Offset 0xA018
-+ * GMAC1 Offset 0xE018
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit1_0018
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int reserved : 2; // 31
-+ unsigned int port1_chk_classq : 1; // 29
-+ unsigned int port0_chk_classq : 1; // 28
-+ unsigned int port1_chk_toeq : 1; // 27
-+ unsigned int port0_chk_toeq : 1; // 26
-+ unsigned int port1_chk_hwq : 1; // 25
-+ unsigned int port0_chk_hwq : 1; // 24
-+ unsigned int rx_err_detect : 1; // 23
-+ unsigned int ipv6_exthdr_order: 1; // 22
-+ unsigned int rxc_inv : 1; // 21
-+ unsigned int rgmm_edge : 1; // 20
-+ unsigned int rx_tag_remove : 1; /* 19: Remove Rx VLAN tag */
-+ unsigned int ipv6_rx_chksum : 1; /* 18: IPv6 RX Checksum enable */
-+ unsigned int ipv4_rx_chksum : 1; /* 17: IPv4 RX Checksum enable */
-+ unsigned int rgmii_en : 1; /* 16: RGMII in-band status enable */
-+ unsigned int tx_fc_en : 1; /* 15: TX flow control enable */
-+ unsigned int rx_fc_en : 1; /* 14: RX flow control enable */
-+ unsigned int sim_test : 1; /* 13: speed up timers in simulation */
-+ unsigned int dis_col : 1; /* 12: disable 16 collisions abort function */
-+ unsigned int dis_bkoff : 1; /* 11: disable back-off function */
-+ unsigned int max_len : 3; /* 8-10 maximum receive frame length allowed */
-+ unsigned int adj_ifg : 4; /* 4-7: adjust IFG from 96+/-56 */
-+ unsigned int flow_ctrl : 1; /* 3: flow control also trigged by Rx queues */
-+ unsigned int loop_back : 1; /* 2: transmit data loopback enable */
-+ unsigned int dis_rx : 1; /* 1: disable receive */
-+ unsigned int dis_tx : 1; /* 0: disable transmit */
-+#else
-+ unsigned int dis_tx : 1; /* 0: disable transmit */
-+ unsigned int dis_rx : 1; /* 1: disable receive */
-+ unsigned int loop_back : 1; /* 2: transmit data loopback enable */
-+ unsigned int flow_ctrl : 1; /* 3: flow control also trigged by Rx queues */
-+ unsigned int adj_ifg : 4; /* 4-7: adjust IFG from 96+/-56 */
-+ unsigned int max_len : 3; /* 8-10 maximum receive frame length allowed */
-+ unsigned int dis_bkoff : 1; /* 11: disable back-off function */
-+ unsigned int dis_col : 1; /* 12: disable 16 collisions abort function */
-+ unsigned int sim_test : 1; /* 13: speed up timers in simulation */
-+ unsigned int rx_fc_en : 1; /* 14: RX flow control enable */
-+ unsigned int tx_fc_en : 1; /* 15: TX flow control enable */
-+ unsigned int rgmii_en : 1; /* 16: RGMII in-band status enable */
-+ unsigned int ipv4_rx_chksum : 1; /* 17: IPv4 RX Checksum enable */
-+ unsigned int ipv6_rx_chksum : 1; /* 18: IPv6 RX Checksum enable */
-+ unsigned int rx_tag_remove : 1; /* 19: Remove Rx VLAN tag */
-+ unsigned int rgmm_edge : 1; // 20
-+ unsigned int rxc_inv : 1; // 21
-+ unsigned int ipv6_exthdr_order: 1; // 22
-+ unsigned int rx_err_detect : 1; // 23
-+ unsigned int port0_chk_hwq : 1; // 24
-+ unsigned int port1_chk_hwq : 1; // 25
-+ unsigned int port0_chk_toeq : 1; // 26
-+ unsigned int port1_chk_toeq : 1; // 27
-+ unsigned int port0_chk_classq : 1; // 28
-+ unsigned int port1_chk_classq : 1; // 29
-+ unsigned int reserved : 2; // 31
-+#endif
-+ } bits;
-+} GMAC_CONFIG0_T;
-+
-+/**********************************************************************
-+ * GMAC Configuration 1
-+ * GMAC0 Offset 0xA01C
-+ * GMAC1 Offset 0xE01C
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit1_001c
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int reserved : 16;
-+ unsigned int rel_threshold : 8; /* flow control release threshold */
-+ unsigned int set_threshold : 8; /* flow control set threshold */
-+#else
-+ unsigned int set_threshold : 8; /* flow control set threshold */
-+ unsigned int rel_threshold : 8; /* flow control release threshold */
-+ unsigned int reserved : 16;
-+#endif
-+ } bits;
-+} GMAC_CONFIG1_T;
-+
-+#define GMAC_FLOWCTRL_SET_MAX 32
-+#define GMAC_FLOWCTRL_SET_MIN 0
-+#define GMAC_FLOWCTRL_RELEASE_MAX 32
-+#define GMAC_FLOWCTRL_RELEASE_MIN 0
-+
-+/**********************************************************************
-+ * GMAC Configuration 2
-+ * GMAC0 Offset 0xA020
-+ * GMAC1 Offset 0xE020
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit1_0020
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int rel_threshold : 16; /* flow control release threshold */
-+ unsigned int set_threshold : 16; /* flow control set threshold */
-+#else
-+ unsigned int set_threshold : 16; /* flow control set threshold */
-+ unsigned int rel_threshold : 16; /* flow control release threshold */
-+#endif
-+ } bits;
-+} GMAC_CONFIG2_T;
-+
-+/**********************************************************************
-+ * GMAC Configuration 3
-+ * GMAC0 Offset 0xA024
-+ * GMAC1 Offset 0xE024
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit1_0024
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int rel_threshold : 16; /* flow control release threshold */
-+ unsigned int set_threshold : 16; /* flow control set threshold */
-+#else
-+ unsigned int set_threshold : 16; /* flow control set threshold */
-+ unsigned int rel_threshold : 16; /* flow control release threshold */
-+#endif
-+ } bits;
-+} GMAC_CONFIG3_T;
-+
-+
-+/**********************************************************************
-+ * GMAC STATUS
-+ * GMAC0 Offset 0xA02C
-+ * GMAC1 Offset 0xE02C
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit1_002c
-+ {
-+#if (BIG_ENDIAN==1)
-+ unsigned int : 25;
-+ unsigned int mii_rmii : 2; /* PHY interface type */
-+ unsigned int reserved : 1;
-+ unsigned int duplex : 1; /* duplex mode */
-+ unsigned int speed : 2; /* link speed(00->2.5M 01->25M 10->125M) */
-+ unsigned int link : 1; /* link status */
-+#else
-+ unsigned int link : 1; /* link status */
-+ unsigned int speed : 2; /* link speed(00->2.5M 01->25M 10->125M) */
-+ unsigned int duplex : 1; /* duplex mode */
-+ unsigned int reserved : 1;
-+ unsigned int mii_rmii : 2; /* PHY interface type */
-+ unsigned int : 25;
-+#endif
-+ } bits;
-+} GMAC_STATUS_T;
-+
-+#define GMAC_SPEED_10 0
-+#define GMAC_SPEED_100 1
-+#define GMAC_SPEED_1000 2
-+
-+#define GMAC_PHY_MII 0
-+#define GMAC_PHY_GMII 1
-+#define GMAC_PHY_RGMII_100 2
-+#define GMAC_PHY_RGMII_1000 3
-+
-+/**********************************************************************
-+ * Queue Header
-+ * (1) TOE Queue Header
-+ * (2) Non-TOE Queue Header
-+ * (3) Interrupt Queue Header
-+ *
-+ * memory Layout
-+ * TOE Queue Header
-+ * 0x60003000 +---------------------------+ 0x0000
-+ * | TOE Queue 0 Header |
-+ * | 8 * 4 Bytes |
-+ * +---------------------------+ 0x0020
-+ * | TOE Queue 1 Header |
-+ * | 8 * 4 Bytes |
-+ * +---------------------------+ 0x0040
-+ * | ...... |
-+ * | |
-+ * +---------------------------+
-+ *
-+ * Non TOE Queue Header
-+ * 0x60002000 +---------------------------+ 0x0000
-+ * | Default Queue 0 Header |
-+ * | 2 * 4 Bytes |
-+ * +---------------------------+ 0x0008
-+ * | Default Queue 1 Header |
-+ * | 2 * 4 Bytes |
-+ * +---------------------------+ 0x0010
-+ * | Classification Queue 0 |
-+ * | 2 * 4 Bytes |
-+ * +---------------------------+
-+ * | Classification Queue 1 |
-+ * | 2 * 4 Bytes |
-+ * +---------------------------+ (n * 8 + 0x10)
-+ * | ... |
-+ * | 2 * 4 Bytes |
-+ * +---------------------------+ (13 * 8 + 0x10)
-+ * | Classification Queue 13 |
-+ * | 2 * 4 Bytes |
-+ * +---------------------------+ 0x80
-+ * | Interrupt Queue 0 |
-+ * | 2 * 4 Bytes |
-+ * +---------------------------+
-+ * | Interrupt Queue 1 |
-+ * | 2 * 4 Bytes |
-+ * +---------------------------+
-+ * | Interrupt Queue 2 |
-+ * | 2 * 4 Bytes |
-+ * +---------------------------+
-+ * | Interrupt Queue 3 |
-+ * | 2 * 4 Bytes |
-+ * +---------------------------+
-+ *
-+ **********************************************************************/
-+#define TOE_QUEUE_HDR_ADDR(n) (TOE_TOE_QUE_HDR_BASE + n * 32)
-+#define TOE_Q_HDR_AREA_END (TOE_QUEUE_HDR_ADDR(TOE_TOE_QUEUE_MAX+1))
-+#define TOE_DEFAULT_Q0_HDR_BASE (TOE_NONTOE_QUE_HDR_BASE + 0x00)
-+#define TOE_DEFAULT_Q1_HDR_BASE (TOE_NONTOE_QUE_HDR_BASE + 0x08)
-+#define TOE_CLASS_Q_HDR_BASE (TOE_NONTOE_QUE_HDR_BASE + 0x10)
-+#define TOE_INTR_Q_HDR_BASE (TOE_NONTOE_QUE_HDR_BASE + 0x80)
-+#define INTERRUPT_QUEUE_HDR_ADDR(n) (TOE_INTR_Q_HDR_BASE + n * 8)
-+#define NONTOE_Q_HDR_AREA_END (INTERRUPT_QUEUE_HDR_ADDR(TOE_INTR_QUEUE_MAX+1))
-+/**********************************************************************
-+ * TOE Queue Header Word 0
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ unsigned int base_size;
-+} TOE_QHDR0_T;
-+
-+#define TOE_QHDR0_BASE_MASK (~0x0f)
-+
-+/**********************************************************************
-+ * TOE Queue Header Word 1
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_qhdr1
-+ {
-+#if (BIG_ENDIAN==1)
-+
-+ unsigned int wptr : 16; // bit 31:16
-+ unsigned int rptr : 16; // bit 15:0
-+#else
-+ unsigned int rptr : 16; // bit 15:0
-+ unsigned int wptr : 16; // bit 31:16
-+#endif
-+ } bits;
-+} TOE_QHDR1_T;
-+
-+/**********************************************************************
-+ * TOE Queue Header Word 2
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_qhdr2
-+ {
-+#if (BIG_ENDIAN==1)
-+
-+ unsigned int usd : 1; // bit 31 0: if no data assembled yet
-+ unsigned int ctl : 1; // bit 30 1: have control flag bits (except ack)
-+ unsigned int osq : 1; // bit 29 1: out of sequence
-+ unsigned int sat : 1; // bit 28 1: SeqCnt > SeqThreshold, or AckCnt > AckThreshold
-+ unsigned int ip_opt : 1; // bit 27 1: have IPV4 option or IPV6 Extension header
-+ unsigned int tcp_opt : 1; // bit 26 1: Have TCP option
-+ unsigned int abn : 1; // bit 25 1: Abnormal case Found
-+ unsigned int dack : 1; // bit 24 1: Duplicated ACK
-+ unsigned int reserved : 7; // bit 23:17
-+ unsigned int TotalPktSize : 17; // bit 16: 0 Total packet size
-+#else
-+ unsigned int TotalPktSize : 17; // bit 16: 0 Total packet size
-+ unsigned int reserved : 7; // bit 23:17
-+ unsigned int dack : 1; // bit 24 1: Duplicated ACK
-+ unsigned int abn : 1; // bit 25 1: Abnormal case Found
-+ unsigned int tcp_opt : 1; // bit 26 1: Have TCP option
-+ unsigned int ip_opt : 1; // bit 27 1: have IPV4 option or IPV6 Extension header
-+ unsigned int sat : 1; // bit 28 1: SeqCnt > SeqThreshold, or AckCnt > AckThreshold
-+ unsigned int osq : 1; // bit 29 1: out of sequence
-+ unsigned int ctl : 1; // bit 30 1: have control flag bits (except ack)
-+ unsigned int usd : 1; // bit 31 0: if no data assembled yet
-+#endif
-+ } bits;
-+} TOE_QHDR2_T;
-+
-+/**********************************************************************
-+ * TOE Queue Header Word 3
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ unsigned int seq_num;
-+} TOE_QHDR3_T;
-+
-+/**********************************************************************
-+ * TOE Queue Header Word 4
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ unsigned int ack_num;
-+} TOE_QHDR4_T;
-+
-+/**********************************************************************
-+ * TOE Queue Header Word 5
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_qhdr5
-+ {
-+#if (BIG_ENDIAN==1)
-+
-+ unsigned int SeqCnt : 16; // bit 31:16
-+ unsigned int AckCnt : 16; // bit 15:0
-+#else
-+ unsigned int AckCnt : 16; // bit 15:0
-+ unsigned int SeqCnt : 16; // bit 31:16
-+#endif
-+ } bits;
-+} TOE_QHDR5_T;
-+
-+/**********************************************************************
-+ * TOE Queue Header Word 6
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_qhdr6
-+ {
-+#if (BIG_ENDIAN==1)
-+
-+ unsigned int MaxPktSize : 14; // bit 31:18
-+ unsigned int iq_num : 2; // bit 17:16
-+ unsigned int WinSize : 16; // bit 15:0
-+#else
-+ unsigned int WinSize : 16; // bit 15:0
-+ unsigned int iq_num : 2; // bit 17:16
-+ unsigned int MaxPktSize : 14; // bit 31:18
-+#endif
-+ } bits;
-+} TOE_QHDR6_T;
-+
-+/**********************************************************************
-+ * TOE Queue Header Word 7
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_qhdr7
-+ {
-+#if (BIG_ENDIAN==1)
-+
-+ unsigned int SeqThreshold : 16; // bit 31:16
-+ unsigned int AckThreshold : 16; // bit 15:0
-+#else
-+ unsigned int AckThreshold : 16; // bit 15:0
-+ unsigned int SeqThreshold : 16; // bit 31:16
-+#endif
-+ } bits;
-+} TOE_QHDR7_T;
-+
-+/**********************************************************************
-+ * TOE Queue Header
-+ **********************************************************************/
-+typedef struct
-+{
-+ TOE_QHDR0_T word0;
-+ TOE_QHDR1_T word1;
-+ TOE_QHDR2_T word2;
-+ TOE_QHDR3_T word3;
-+ TOE_QHDR4_T word4;
-+ TOE_QHDR5_T word5;
-+ TOE_QHDR6_T word6;
-+ TOE_QHDR7_T word7;
-+} TOE_QHDR_T;
-+
-+/**********************************************************************
-+ * NONTOE Queue Header Word 0
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ unsigned int base_size;
-+} NONTOE_QHDR0_T;
-+
-+#define NONTOE_QHDR0_BASE_MASK (~0x0f)
-+
-+/**********************************************************************
-+ * NONTOE Queue Header Word 1
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_nonqhdr1
-+ {
-+#if (BIG_ENDIAN==1)
-+
-+ unsigned int wptr : 16; // bit 31:16
-+ unsigned int rptr : 16; // bit 15:0
-+#else
-+ unsigned int rptr : 16; // bit 15:0
-+ unsigned int wptr : 16; // bit 31:16
-+#endif
-+ } bits;
-+} NONTOE_QHDR1_T;
-+
-+/**********************************************************************
-+ * Non-TOE Queue Header
-+ **********************************************************************/
-+typedef struct
-+{
-+ NONTOE_QHDR0_T word0;
-+ NONTOE_QHDR1_T word1;
-+} NONTOE_QHDR_T;
-+
-+/**********************************************************************
-+ * Interrupt Queue Header Word 0
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_intrqhdr0
-+ {
-+#if (BIG_ENDIAN==1)
-+
-+ unsigned int wptr : 16; // bit 31:16 Write Pointer where hw stopped
-+ unsigned int win_size : 16; // bit 15:0 Descriptor Ring Size
-+#else
-+ unsigned int win_size : 16; // bit 15:0 Descriptor Ring Size
-+ unsigned int wptr : 16; // bit 31:16 Write Pointer where hw stopped
-+#endif
-+ } bits;
-+} INTR_QHDR0_T;
-+
-+/**********************************************************************
-+ * Interrupt Queue Header Word 1
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_intrqhdr1
-+ {
-+#if (BIG_ENDIAN==1)
-+
-+ unsigned int ctl : 1; // bit 31 1: have control flag bits (except ack)
-+ unsigned int osq : 1; // bit 30 1: out of sequence
-+ unsigned int sat : 1; // bit 29 1: SeqCnt > SeqThreshold, or AckCnt > AckThreshold
-+ unsigned int ip_opt : 1; // bit 28 1: have IPV4 option or IPV6 Extension header
-+ unsigned int tcp_opt : 1; // bit 27 1: Have TCP option
-+ unsigned int abn : 1; // bit 26 1: Abnormal case Found
-+ unsigned int dack : 1; // bit 25 1: Duplicated ACK
-+ unsigned int tcp_qid : 8; // bit 24:17 TCP Queue ID
-+ unsigned int TotalPktSize : 17; // bit 16: 0 Total packet size
-+#else
-+ unsigned int TotalPktSize : 17; // bit 16: 0 Total packet size
-+ unsigned int tcp_qid : 8; // bit 24:17 TCP Queue ID
-+ unsigned int dack : 1; // bit 25 1: Duplicated ACK
-+ unsigned int abn : 1; // bit 26 1: Abnormal case Found
-+ unsigned int tcp_opt : 1; // bit 27 1: Have TCP option
-+ unsigned int ip_opt : 1; // bit 28 1: have IPV4 option or IPV6 Extension header
-+ unsigned int sat : 1; // bit 29 1: SeqCnt > SeqThreshold, or AckCnt > AckThreshold
-+ unsigned int osq : 1; // bit 30 1: out of sequence
-+ unsigned int ctl : 1; // bit 31 1: have control flag bits (except ack)
-+#endif
-+ } bits;
-+} INTR_QHDR1_T;
-+
-+/**********************************************************************
-+ * Interrupt Queue Header Word 2
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ unsigned int seq_num;
-+} INTR_QHDR2_T;
-+
-+/**********************************************************************
-+ * Interrupt Queue Header Word 3
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ unsigned int ack_num;
-+} INTR_QHDR3_T;
-+
-+/**********************************************************************
-+ * Interrupt Queue Header Word 4
-+ **********************************************************************/
-+typedef union
-+{
-+ unsigned int bits32;
-+ struct bit_intrqhdr4
-+ {
-+#if (BIG_ENDIAN==1)
-+
-+ unsigned int SeqCnt : 16; // bit 31:16 Seq# change since last seq# intr.
-+ unsigned int AckCnt : 16; // bit 15:0 Ack# change since last ack# intr.
-+#else
-+ unsigned int AckCnt : 16; // bit 15:0 Ack# change since last ack# intr.
-+ unsigned int SeqCnt : 16; // bit 31:16 Seq# change since last seq# intr.
-+#endif
-+ } bits;
-+} INTR_QHDR4_T;
-+
-+/**********************************************************************
-+ * Interrupt Queue Header
-+ **********************************************************************/
-+typedef struct
-+{
-+ INTR_QHDR0_T word0;
-+ INTR_QHDR1_T word1;
-+ INTR_QHDR2_T word2;
-+ INTR_QHDR3_T word3;
-+ INTR_QHDR4_T word4;
-+ unsigned int word5;
-+ unsigned int word6;
-+ unsigned int word7;
-+} INTR_QHDR_T;
-+
-+/**********************************************************************
-+ * GMAC Conf
-+ **********************************************************************/
-+typedef struct gmac_conf {
-+ struct net_device *dev;
-+ int portmap;
-+ int vid;
-+ int flag; /* 1: active 0: non-active */
-+} sys_gmac_conf;
-+
-+/**********************************************************************
-+ * GMAC private data
-+ **********************************************************************/
-+typedef struct {
-+ unsigned int rwptr_reg;
-+ unsigned int desc_base;
-+ unsigned int total_desc_num;
-+ unsigned short finished_idx;
-+ GMAC_TXDESC_T *curr_tx_desc;
-+ GMAC_TXDESC_T *curr_finished_desc;
-+ struct sk_buff *tx_skb[TX_DESC_NUM];
-+ unsigned long total_sent;
-+ unsigned long total_finished;
-+ unsigned long intr_cnt;
-+} GMAC_SWTXQ_T;
-+
-+typedef struct {
-+ unsigned int desc_base;
-+ unsigned long eof_cnt;
-+} GMAC_HWTXQ_T;
-+
-+typedef struct gmac_private{
-+ struct net_device *dev;
-+ unsigned int existed;
-+ unsigned int port_id; // 0 or 1
-+ unsigned int base_addr;
-+ unsigned int dma_base_addr;
-+ unsigned char *mac_addr1;
-+ unsigned char *mac_addr2;
-+ unsigned int swtxq_desc_base;
-+ unsigned int hwtxq_desc_base;
-+ GMAC_SWTXQ_T swtxq[TOE_SW_TXQ_NUM];
-+ GMAC_HWTXQ_T hwtxq[TOE_HW_TXQ_NUM];
-+ NONTOE_QHDR_T *default_qhdr;
-+ unsigned int default_desc_base;
-+ unsigned int default_desc_num;
-+ unsigned int rx_curr_desc;
-+ DMA_RWPTR_T rx_rwptr;
-+ struct sk_buff *curr_rx_skb;
-+ dma_addr_t default_desc_base_dma;
-+ dma_addr_t swtxq_desc_base_dma;
-+ dma_addr_t hwtxq_desc_base_dma;
-+ unsigned int irq;
-+ unsigned int flow_control_enable ;
-+ unsigned int pre_phy_status;
-+ unsigned int full_duplex_cfg;
-+ unsigned int speed_cfg;
-+ unsigned int auto_nego_cfg;
-+ unsigned int full_duplex_status;
-+ unsigned int speed_status;
-+ unsigned int phy_mode; /* 0->MII 1->GMII 2->RGMII(10/100) 3->RGMII(1000) */
-+ unsigned int phy_addr;
-+ unsigned int intr0_enabled; // 1: enabled
-+ unsigned int intr1_enabled; // 1: enabled
-+ unsigned int intr2_enabled; // 1: enabled
-+ unsigned int intr3_enabled; // 1: enabled
-+ unsigned int intr4_enabled; // 1: enabled
-+// unsigned int intr4_enabled_1; // 1: enabled
-+ unsigned int intr0_selected; // 1: selected
-+ unsigned int intr1_selected; // 1: selected
-+ unsigned int intr2_selected; // 1: selected
-+ unsigned int intr3_selected; // 1: selected
-+ unsigned int intr4_selected; // 1: selected
-+ // void (*gmac_rcv_handler)(struct sk_buff *, int);
-+ struct net_device_stats ifStatics;
-+ unsigned long txDerr_cnt[GMAC_NUM];
-+ unsigned long txPerr_cnt[GMAC_NUM];
-+ unsigned long RxDerr_cnt[GMAC_NUM];
-+ unsigned long RxPerr_cnt[GMAC_NUM];
-+ unsigned int isr_rx_cnt;
-+ unsigned int isr_tx_cnt;
-+ unsigned long rx_discard;
-+ unsigned long rx_error;
-+ unsigned long rx_mcast;
-+ unsigned long rx_bcast;
-+ unsigned long rx_status_cnt[8];
-+ unsigned long rx_chksum_cnt[8];
-+ unsigned long rx_sta1_ucast; // for STA 1 MAC Address
-+ unsigned long rx_sta2_ucast; // for STA 2 MAC Address
-+ unsigned long mib_full_cnt;
-+ unsigned long rx_pause_on_cnt;
-+ unsigned long tx_pause_on_cnt;
-+ unsigned long rx_pause_off_cnt;
-+ unsigned long tx_pause_off_cnt;
-+ unsigned long rx_overrun_cnt;
-+ unsigned long status_changed_cnt;
-+ unsigned long default_q_cnt;
-+ unsigned long hw_fq_empty_cnt;
-+ unsigned long sw_fq_empty_cnt;
-+ unsigned long default_q_intr_cnt;
-+ pid_t thr_pid;
-+ wait_queue_head_t thr_wait;
-+ struct completion thr_exited;
-+ spinlock_t lock;
-+ int time_to_die;
-+ int operation;
-+#ifdef SL351x_GMAC_WORKAROUND
-+ unsigned long short_frames_cnt;
-+#endif
-+}GMAC_INFO_T ;
-+
-+typedef struct toe_private {
-+ unsigned int swfq_desc_base;
-+ unsigned int hwfq_desc_base;
-+ unsigned int hwfq_buf_base;
-+// unsigned int toe_desc_base[TOE_TOE_QUEUE_NUM];
-+// unsigned int toe_desc_num;
-+// unsigned int class_desc_base;
-+// unsigned int class_desc_num;
-+// unsigned int intr_desc_base;
-+// unsigned int intr_desc_num;
-+// unsigned int intr_buf_base;
-+ DMA_RWPTR_T fq_rx_rwptr;
-+ GMAC_INFO_T gmac[GMAC_NUM];
-+ dma_addr_t sw_freeq_desc_base_dma;
-+ dma_addr_t hw_freeq_desc_base_dma;
-+ dma_addr_t hwfq_buf_base_dma;
-+ dma_addr_t hwfq_buf_end_dma;
-+// dma_addr_t toe_desc_base_dma[TOE_TOE_QUEUE_NUM];
-+// dma_addr_t class_desc_base_dma;
-+// dma_addr_t intr_desc_base_dma;
-+// dma_addr_t intr_buf_base_dma;
-+// unsigned long toe_iq_intr_full_cnt[TOE_INTR_QUEUE_NUM];
-+// unsigned long toe_iq_intr_cnt[TOE_INTR_QUEUE_NUM];
-+// unsigned long toe_q_intr_full_cnt[TOE_TOE_QUEUE_NUM];
-+// unsigned long class_q_intr_full_cnt[TOE_CLASS_QUEUE_NUM];
-+// unsigned long class_q_intr_cnt[TOE_CLASS_QUEUE_NUM];
-+} TOE_INFO_T;
-+
-+extern TOE_INFO_T toe_private_data;
-+
-+#define GMAC_PORT0 0
-+#define GMAC_PORT1 1
-+/**********************************************************************
-+ * PHY Definition
-+ **********************************************************************/
-+#define HPHY_ADDR 0x01
-+#define GPHY_ADDR 0x02
-+
-+enum phy_state
-+{
-+ LINK_DOWN = 0,
-+ LINK_UP = 1
-+};
-+
-+/* transmit timeout value */
-+
-+#endif //_GMAC_SL351x_H
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/sl351x_hash_cfg.h
-@@ -0,0 +1,365 @@
-+/*-----------------------------------------------------------------------------------
-+* sl351x_hash_cfg.h
-+*
-+* Description:
-+*
-+* History:
-+*
-+* 9/14/2005 Gary Chen Create
-+*
-+*-------------------------------------------------------------------------------------*/
-+#ifndef _SL351x_HASH_CFG_H_
-+#define _SL351x_HASH_CFG_H_ 1
-+
-+// #define NAT_DEBUG_MSG 1
-+// #define DEBUG_NAT_MIXED_HW_SW_TX 1
-+#ifdef DEBUG_NAT_MIXED_HW_SW_TX
-+ // #define NAT_DEBUG_LAN_HASH_TIMEOUT 1
-+ // #define NAT_DEBUG_WAN_HASH_TIMEOUT 1
-+#endif
-+
-+#define IPIV(a,b,c,d) ((a<<24)+(b<<16)+(c<<8)+d)
-+#define IPIV1(a) ((a>>24)&0xff)
-+#define IPIV2(a) ((a>>16)&0xff)
-+#define IPIV3(a) ((a>>8)&0xff)
-+#define IPIV4(a) ((a)&0xff)
-+
-+#define HASH_MAX_BYTES 64 // 128
-+#define HASH_ACTION_DWORDS 9
-+#define HASH_MAX_DWORDS (HASH_MAX_BYTES / sizeof(u32))
-+#define HASH_MAX_KEY_DWORD (HASH_MAX_DWORDS - HASH_ACTION_DWORDS)
-+#define HASH_INIT_KEY 0x534C4F52
-+#define HASH_BITS 12 // 12 : Normal, 7: Simulation
-+#define HASH_TOTAL_ENTRIES (1 << HASH_BITS)
-+#define HASH_MAX_ENTRIES (1 << 12)
-+#define HASH_TOE_ENTRIES (HASH_TOTAL_ENTRIES >> 5)
-+#define HASH_BITS_MASK ((1 << HASH_BITS) - 1)
-+
-+#define hash_lock(lock) // spin_lock_bh(lock)
-+#define hash_unlock(lock) // spin_unlock_bh(lock)
-+
-+/*----------------------------------------------------------------------
-+ * special macro
-+ ----------------------------------------------------------------------*/
-+#define HASH_PUSH_WORD(cp, data) {*cp++ = (((u16)(data)) ) & 0xff; \
-+ *cp++ = (((u16)(data)) >> 8) & 0xff;}
-+#define HASH_PUSH_DWORD(cp, data) {*cp++ = (u8)(((u32)(data)) ) & 0xff; \
-+ *cp++ = (u8)(((u32)(data)) >> 8) & 0xff; \
-+ *cp++ = (u8)(((u32)(data)) >> 16) & 0xff; \
-+ *cp++ = (u8)(((u32)(data)) >> 24) & 0xff;}
-+#define HASH_PUSH_BYTE(cp, data) {*cp++ = ((u8)(data)) & 0xff;}
-+
-+/*----------------------------------------------------------------------
-+ * key
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+ u8 port;
-+ u16 Ethertype;
-+ u8 da[6];
-+ u8 sa[6];
-+ u16 pppoe_sid;
-+ u16 vlan_id;
-+ u8 ipv4_hdrlen;
-+ u8 ip_tos;
-+ u8 ip_protocol;
-+ u32 ipv6_flow_label;
-+ u8 sip[16];
-+ u8 dip[16];
-+ //__u32 sip[4];
-+ //__u32 dip[4];
-+ u8 l4_bytes[24];
-+ u8 l7_bytes[24];
-+ u8 ipv6; // 1: IPv6, 0: IPV4
-+} ENTRY_KEY_T;
-+
-+/*----------------------------------------------------------------------
-+ * key for NAT
-+ * Note: packed
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+ u16 Ethertype; // not used
-+ u8 port_id;
-+ u8 rule_id;
-+ u8 ip_protocol;
-+ u8 reserved1; // ip_tos, not used
-+ u16 reserved2; // not used
-+ u32 sip;
-+ u32 dip;
-+ u16 sport;
-+ u16 dport;
-+} NAT_KEY_T;
-+
-+#define NAT_KEY_DWORD_SIZE (sizeof(NAT_KEY_T)/sizeof(u32))
-+#define NAT_KEY_SIZE (sizeof(NAT_KEY_T))
-+
-+/*----------------------------------------------------------------------
-+ * key for NAT
-+ * Note: packed
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+ u16 Ethertype; // not used
-+ u8 port_id;
-+ u8 rule_id;
-+ u8 ip_protocol;
-+ u8 reserved1; // ip_tos, not used
-+ u16 reserved2; // not used
-+ u32 sip;
-+ u32 dip;
-+ u16 reserved3;
-+ u16 protocol;
-+ u16 reserved4;
-+ u16 call_id;
-+} GRE_KEY_T;
-+
-+#define GRE_KEY_DWORD_SIZE (sizeof(GRE_KEY_T)/sizeof(u32))
-+#define GRE_KEY_SIZE (sizeof(GRE_KEY_T))
-+/*----------------------------------------------------------------------
-+ * key present or not
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+ u32 port : 1;
-+ u32 Ethertype : 1;
-+ u32 da : 1;
-+ u32 sa : 1;
-+ u32 pppoe_sid : 1;
-+ u32 vlan_id : 1;
-+ u32 ipv4_hdrlen : 1;
-+ u32 ip_tos : 1;
-+ u32 ip_protocol : 1;
-+ u32 ipv6_flow_label : 1;
-+ u32 sip : 1;
-+ u32 dip : 1;
-+ u32 l4_bytes_0_3 : 1;
-+ u32 l4_bytes_4_7 : 1;
-+ u32 l4_bytes_8_11 : 1;
-+ u32 l4_bytes_12_15 : 1;
-+ u32 l4_bytes_16_19 : 1;
-+ u32 l4_bytes_20_23 : 1;
-+ u32 l7_bytes_0_3 : 1;
-+ u32 l7_bytes_4_7 : 1;
-+ u32 l7_bytes_8_11 : 1;
-+ u32 l7_bytes_12_15 : 1;
-+ u32 l7_bytes_16_19 : 1;
-+ u32 l7_bytes_20_23 : 1;
-+ u32 reserved : 8;
-+} KEY_FIELD_T;
-+
-+/*----------------------------------------------------------------------
-+ * action
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+ u32 reserved0 : 5; // bit 0:4
-+ u32 pppoe : 2; // bit 5:6
-+ u32 vlan : 2; // bit 7:8
-+ u32 sa : 1; // bit 9
-+ u32 da : 1; // bit 10
-+ u32 Dport : 1; // bit 11
-+ u32 Sport : 1; // bit 12
-+ u32 Dip : 1; // bit 13
-+ u32 Sip : 1; // bit 14
-+ u32 sw_id : 1; // bit 15
-+ u32 frag : 1; // bit 16
-+ u32 option : 1; // bit 17
-+ u32 ttl_0 : 1; // bit 18
-+ u32 ttl_1 : 1; // bit 19
-+ u32 mtu : 1; // bit 20
-+ u32 exception : 1; // bit 21
-+ u32 srce_qid : 1; // bit 22
-+ u32 discard : 1; // bit 23
-+ u32 dest_qid : 8; // bit 24:31
-+} ENTRY_ACTION_T;
-+
-+#define ACTION_DISCARD_BIT BIT(23)
-+#define ACTION_SRCE_QID_BIT BIT(22)
-+#define ACTION_EXCEPTION_BIT BIT(21)
-+#define ACTION_MTU_BIT BIT(20)
-+#define ACTION_TTL_1_BIT BIT(19)
-+#define ACTION_TTL_0_BIT BIT(18)
-+#define ACTION_IP_OPTION BIT(17)
-+#define ACTION_FRAG_BIT BIT(16)
-+#define ACTION_SWID_BIT BIT(15)
-+#define ACTION_SIP_BIT BIT(14)
-+#define ACTION_DIP_BIT BIT(13)
-+#define ACTION_SPORT_BIT BIT(12)
-+#define ACTION_DPORT_BIT BIT(11)
-+#define ACTION_DA_BIT BIT(10)
-+#define ACTION_SA_BIT BIT(9)
-+#define ACTION_VLAN_DEL_BIT BIT(8)
-+#define ACTION_VLAN_INS_BIT BIT(7)
-+#define ACTION_PPPOE_DEL_BIT BIT(6)
-+#define ACTION_PPPOE_INS_BIT BIT(5)
-+#define ACTION_L4_THIRD_BIT BIT(4)
-+#define ACTION_L4_FOURTH_BIT BIT(3)
-+
-+#define NAT_ACTION_BITS (ACTION_SRCE_QID_BIT | ACTION_EXCEPTION_BIT | \
-+ ACTION_TTL_1_BIT | ACTION_TTL_0_BIT | \
-+ ACTION_IP_OPTION | ACTION_FRAG_BIT | \
-+ ACTION_DA_BIT | ACTION_SA_BIT)
-+#define NAT_LAN2WAN_ACTIONS (NAT_ACTION_BITS | ACTION_SIP_BIT | ACTION_SPORT_BIT)
-+#define NAT_WAN2LAN_ACTIONS (NAT_ACTION_BITS | ACTION_DIP_BIT | ACTION_DPORT_BIT)
-+#define NAT_PPPOE_LAN2WAN_ACTIONS (NAT_LAN2WAN_ACTIONS | ACTION_PPPOE_INS_BIT)
-+#define NAT_PPPOE_WAN2LAN_ACTIONS (NAT_WAN2LAN_ACTIONS | ACTION_PPPOE_DEL_BIT)
-+#define NAT_PPTP_LAN2WAN_ACTIONS (NAT_ACTION_BITS | ACTION_SIP_BIT | ACTION_L4_FOURTH_BIT)
-+#define NAT_PPTP_WAN2LAN_ACTIONS (NAT_ACTION_BITS | ACTION_DIP_BIT | ACTION_L4_FOURTH_BIT)
-+#define NAT_PPPOE_PPTP_LAN2WAN_ACTIONS (NAT_PPTP_LAN2WAN_ACTIONS | ACTION_PPPOE_INS_BIT)
-+#define NAT_PPPOE_PPTP_WAN2LAN_ACTIONS (NAT_PPTP_WAN2LAN_ACTIONS | ACTION_PPPOE_DEL_BIT)
-+
-+/*----------------------------------------------------------------------
-+ * parameter
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+ u8 da[6];
-+ u8 sa[6];
-+ u16 vlan;
-+ u16 pppoe;
-+ u32 Sip;
-+ u32 Dip;
-+ u16 Sport;
-+ u16 Dport;
-+ u16 sw_id;
-+ u16 mtu;
-+} ENTRY_PARAM_T;
-+
-+/*----------------------------------------------------------------------
-+ * Hash Entry
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+ char rule;
-+ ENTRY_KEY_T key;
-+ KEY_FIELD_T key_present;
-+ ENTRY_ACTION_T action;
-+ ENTRY_PARAM_T param;
-+ int index;
-+ int total_dwords;
-+} HASH_ENTRY_T;
-+
-+/*----------------------------------------------------------------------
-+ * NAT Hash Entry
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+ short counter;
-+ short interval;
-+} HASH_TIMEOUT_T;
-+
-+/*----------------------------------------------------------------------
-+ * NAT Hash Entry for TCP/UDP protocol
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+ NAT_KEY_T key;
-+ union {
-+ u32 dword;
-+ ENTRY_ACTION_T bits;
-+ } action;
-+ ENTRY_PARAM_T param;
-+ HASH_TIMEOUT_T tmo; // used by software only, to use memory space efficiently
-+} NAT_HASH_ENTRY_T;
-+
-+#define NAT_HASH_ENTRY_SIZE (sizeof(NAT_HASH_ENTRY_T))
-+
-+/*----------------------------------------------------------------------
-+ * GRE Hash Entry for PPTP/GRE protocol
-+ ----------------------------------------------------------------------*/
-+typedef struct {
-+ GRE_KEY_T key;
-+ union {
-+ u32 dword;
-+ ENTRY_ACTION_T bits;
-+ } action;
-+ ENTRY_PARAM_T param;
-+ HASH_TIMEOUT_T tmo; // used by software only, to use memory space efficiently
-+} GRE_HASH_ENTRY_T;
-+
-+#define GRE_HASH_ENTRY_SIZE (sizeof(GRE_HASH_ENTRY_T))
-+
-+/*----------------------------------------------------------------------
-+ * External Variables
-+ ----------------------------------------------------------------------*/
-+extern char hash_tables[HASH_TOTAL_ENTRIES][HASH_MAX_BYTES] __attribute__ ((aligned(16)));
-+extern u32 hash_nat_owner_bits[HASH_TOTAL_ENTRIES/32];
-+/*----------------------------------------------------------------------
-+* hash_get_valid_flag
-+*----------------------------------------------------------------------*/
-+static inline int hash_get_valid_flag(int index)
-+{
-+ volatile u32 *hash_valid_bits_ptr = (volatile u32 *)TOE_V_BIT_BASE;
-+
-+#ifdef SL351x_GMAC_WORKAROUND
-+ if (index >= (0x80 * 8) && index < (0x8c * 8))
-+ return 1;
-+#endif
-+ return (hash_valid_bits_ptr[index/32] & (1 << (index %32)));
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_get_nat_owner_flag
-+*----------------------------------------------------------------------*/
-+static inline int hash_get_nat_owner_flag(int index)
-+{
-+ return (hash_nat_owner_bits[index/32] & (1 << (index %32)));
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_validate_entry
-+*----------------------------------------------------------------------*/
-+static inline void hash_validate_entry(int index)
-+{
-+ volatile u32 *hash_valid_bits_ptr = (volatile u32 *)TOE_V_BIT_BASE;
-+ register int ptr = index/32, bits = 1 << (index %32);
-+
-+ hash_valid_bits_ptr[ptr] |= bits;
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_invalidate_entry
-+*----------------------------------------------------------------------*/
-+static inline void hash_invalidate_entry(int index)
-+{
-+ volatile u32 *hash_valid_bits_ptr = (volatile u32 *)TOE_V_BIT_BASE;
-+ register int ptr = index/32, bits = 1 << (index %32);
-+
-+ hash_valid_bits_ptr[ptr] &= ~(bits);
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_nat_enable_owner
-+*----------------------------------------------------------------------*/
-+static inline void hash_nat_enable_owner(int index)
-+{
-+ hash_nat_owner_bits[index/32] |= (1 << (index % 32));
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_nat_disable_owner
-+*----------------------------------------------------------------------*/
-+static inline void hash_nat_disable_owner(int index)
-+{
-+ hash_nat_owner_bits[index/32] &= ~(1 << (index % 32));
-+}
-+
-+/*----------------------------------------------------------------------
-+* hash_get_entry
-+*----------------------------------------------------------------------*/
-+static inline void *hash_get_entry(int index)
-+{
-+ return (void*) &hash_tables[index][0];
-+}
-+
-+/*----------------------------------------------------------------------
-+* Functions
-+*----------------------------------------------------------------------*/
-+extern int hash_add_entry(HASH_ENTRY_T *entry);
-+extern void sl351x_hash_init(void);
-+extern void hash_set_valid_flag(int index, int valid);
-+extern void hash_set_nat_owner_flag(int index, int valid);
-+extern void *hash_get_entry(int index);
-+extern int hash_build_keys(u32 *destp, HASH_ENTRY_T *entry);
-+extern void hash_build_nat_keys(u32 *destp, HASH_ENTRY_T *entry);
-+extern int hash_write_entry(HASH_ENTRY_T *entry, u8 *key);
-+extern int hash_add_entry(HASH_ENTRY_T *entry);
-+extern u16 hash_crc16(u16 crc, u8 *datap, u32 len);
-+extern u16 hash_gen_crc16(u8 *datap, u32 len);
-+
-+#endif // _SL351x_HASH_CFG_H_
-+
-+
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/sl351x_nat_cfg.h
-@@ -0,0 +1,211 @@
-+/**************************************************************************
-+* Copyright 2006 StorLink Semiconductors, Inc. All rights reserved.
-+*--------------------------------------------------------------------------
-+* sl_nat_cfg.h
-+*
-+* Description:
-+* - Define the Device Control Commands for NAT Configuration
-+*
-+* History:
-+*
-+* 4/28/2006 Gary Chen Create
-+*
-+*-----------------------------------------------------------------------------*/
-+#ifndef _SL351x_NAT_CFG_H_
-+#define _SL351x_NAT_CFG_H_ 1
-+
-+/*----------------------------------------------------------------------
-+* Confiuration
-+*----------------------------------------------------------------------*/
-+#ifdef CONFIG_NETFILTER
-+#define CONFIG_SL351x_NAT 1
-+#undef CONFIG_SL351x_NAT
-+#undef CONFIG_SL351x_SYSCTL
-+#endif
-+#define CONFIG_NAT_MAX_IP_NUM 4 // per device (eth0 or eth1)
-+#define CONFIG_NAT_MAX_XPORT 64
-+#define CONFIG_NAT_MAX_WRULE 16 // per Queue
-+#define CONFIG_NAT_TXQ_NUM 4
-+/*----------------------------------------------------------------------
-+* Command set
-+*----------------------------------------------------------------------*/
-+#define SIOCDEVSL351x SIOCDEVPRIVATE // 0x89F0
-+#define NATSSTATUS 0
-+#define NATGSTATUS 1
-+#define NATSETPORT 2
-+#define NATGETPORT 3
-+#define NATADDIP 4
-+#define NATDELIP 5
-+#define NATGETIP 6
-+#define NATAXPORT 7
-+#define NATDXPORT 8
-+#define NATGXPORT 9
-+#define NATSWEIGHT 10
-+#define NATGWEIGHT 11
-+#define NATAWRULE 12
-+#define NATDWRULE 13
-+#define NATGWRULE 14
-+#define NATSDEFQ 15
-+#define NATGDEFQ 16
-+#define NATRMIPCFG 17 // remove IP config
-+#define NATTESTENTRY 18
-+#define NATSETMEM 19
-+#define NATSHOWMEM 20
-+/*----------------------------------------------------------------------
-+* Command Structure
-+*----------------------------------------------------------------------*/
-+// Common Header
-+typedef struct {
-+ unsigned short cmd; // command ID
-+ unsigned short len; // data length, excluding this header
-+} NATCMD_HDR_T;
-+
-+// NATSSTATUS & NATGSTATUS commands
-+typedef struct {
-+ unsigned char enable;
-+} NAT_STATUS_T;
-+
-+// NATSETPORT & NATGETPORT commands
-+typedef struct {
-+ unsigned char portmap;
-+} NAT_PORTCFG_T;
-+
-+typedef struct {
-+ unsigned int ipaddr;
-+ unsigned int netmask;
-+} NAT_IP_ENTRY_T;
-+
-+// NATADDIP & NATDELIP commands
-+typedef struct {
-+ NAT_IP_ENTRY_T entry;
-+} NAT_IPCFG_T;
-+
-+// NATGETIP command
-+typedef struct {
-+ unsigned int total;
-+ NAT_IP_ENTRY_T entry[CONFIG_NAT_MAX_IP_NUM];
-+} NAT_IPCFG_ALL_T;
-+
-+typedef struct {
-+ unsigned int protocol;
-+ unsigned short sport_start;
-+ unsigned short sport_end;
-+ unsigned short dport_start;
-+ unsigned short dport_end;
-+} NAT_XPORT_ENTRY_T;
-+
-+// NATAXPORT & NATDXPORT Commands
-+typedef struct {
-+ NAT_XPORT_ENTRY_T entry;
-+} NAT_XPORT_T;
-+
-+// NATGXPORT Command
-+typedef struct {
-+ unsigned int total;
-+ NAT_XPORT_ENTRY_T entry[CONFIG_NAT_MAX_XPORT];
-+} NAT_XPORT_ALL_T;
-+
-+// NATSWEIGHT & NATGWEIGHT Commands
-+typedef struct {
-+ unsigned char weight[CONFIG_NAT_TXQ_NUM];
-+} NAT_WEIGHT_T;
-+
-+typedef struct {
-+ unsigned int protocol;
-+ unsigned int sip_start;
-+ unsigned int sip_end;
-+ unsigned int dip_start;
-+ unsigned int dip_end;
-+ unsigned short sport_start;
-+ unsigned short sport_end;
-+ unsigned short dport_start;
-+ unsigned short dport_end;
-+} NAT_WRULE_ENTRY_T;
-+
-+// NATAWRULE & NATDWRULE Commands
-+typedef struct {
-+ unsigned int qid;
-+ NAT_WRULE_ENTRY_T entry;
-+} NAT_WRULE_T;
-+
-+// NATGWRULE Command
-+typedef struct {
-+ unsigned int total;
-+ NAT_WRULE_ENTRY_T entry[CONFIG_NAT_MAX_WRULE];
-+} NAT_WRULE_ALL_T;
-+
-+// NATSDEFQ & NATGDEFQ commands
-+typedef struct {
-+ unsigned int qid;
-+} NAT_QUEUE_T;
-+
-+// NATTESTENTRY
-+typedef struct {
-+ u_int16_t cmd; // command ID
-+ u_int16_t len; // data length, excluding this header
-+ u_int8_t init_enable;
-+} NAT_TESTENTRY_T;
-+
-+typedef union
-+{
-+ NAT_STATUS_T status;
-+ NAT_PORTCFG_T portcfg;
-+ NAT_IPCFG_T ipcfg;
-+ NAT_XPORT_T xport;
-+ NAT_WEIGHT_T weight;
-+ NAT_WRULE_T wrule;
-+ NAT_QUEUE_T queue;
-+ NAT_TESTENTRY_T init_entry;
-+} NAT_REQ_E;
-+
-+/*----------------------------------------------------------------------
-+* NAT Configuration
-+* - Used by driver only
-+*----------------------------------------------------------------------*/
-+typedef struct {
-+ unsigned int enabled;
-+ unsigned int init_enabled;
-+ unsigned int tcp_udp_rule_id;
-+ unsigned int gre_rule_id;
-+ unsigned int lan_port;
-+ unsigned int wan_port;
-+ unsigned int default_hw_txq;
-+ short tcp_tmo_interval;
-+ short udp_tmo_interval;
-+ short gre_tmo_interval;
-+ NAT_IPCFG_ALL_T ipcfg[2]; // LAN/WAN port
-+ NAT_XPORT_ALL_T xport;
-+ NAT_WEIGHT_T weight;
-+ NAT_WRULE_ALL_T wrule[CONFIG_NAT_TXQ_NUM];
-+} NAT_CFG_T;
-+
-+/*----------------------------------------------------------------------
-+* NAT Control Block
-+* - Used by driver only
-+* - Stores LAN-IN or WAN-IN information
-+* - WAN-OUT and LAN-OUT driver use them to build up a hash entry
-+* - NOTES: To update this data structure, MUST take care of alignment issue
-+* - MUST make sure that the size of skbuff structure must
-+* be larger than (40 + sizof(NAT_CB_T))
-+*----------------------------------------------------------------------*/
-+typedef struct {
-+ unsigned short tag;
-+ unsigned char sa[6];
-+ unsigned int sip;
-+ unsigned int dip;
-+ unsigned short sport;
-+ unsigned short dport;
-+ unsigned char pppoe_frame;
-+ unsigned char state; // same to enum tcp_conntrack
-+ unsigned char reserved[2];
-+} NAT_CB_T;
-+
-+#define NAT_CB_TAG 0x4C53 // "SL"
-+#define NAT_CB_SIZE sizeof(NAT_CB_T)
-+// #define NAT_SKB_CB(skb) (NAT_CB_T *)(((unsigned int)&((skb)->cb[40]) + 3) & ~3) // for align 4
-+#define NAT_SKB_CB(skb) (NAT_CB_T *)&((skb)->cb[40]) // for align 4
-+
-+#endif // _SL351x_NAT_CFG_H_
-+
-+
-+
---- /dev/null
-+++ b/include/asm-arm/arch-sl2312/sl351x_toe.h
-@@ -0,0 +1,88 @@
-+/**************************************************************************
-+* Copyright 2006 StorLink Semiconductors, Inc. All rights reserved.
-+*--------------------------------------------------------------------------
-+* Name : sl351x_toe.h
-+* Description :
-+* Define for TOE driver of Storlink SL351x
-+*
-+* History
-+*
-+* Date Writer Description
-+*----------------------------------------------------------------------------
-+* Xiaochong Create
-+*
-+****************************************************************************/
-+#ifndef __SL351x_TOE_H
-+#define __SL351x_TOE_H 1
-+#include <net/sock.h>
-+#include <asm/arch/sl351x_gmac.h>
-+#include <linux/timer.h>
-+#include <linux/netdevice.h>
-+#include <linux/ip.h>
-+#include <linux/if_ether.h>
-+/*
-+ * TOE_CONN_T is data structure of tcp connection info, used at both
-+ * device layer and kernel tcp layer
-+ * skb is the jumbo frame
-+ */
-+
-+struct toe_conn{
-+ __u8 qid; // connection qid 0~63.
-+ __u8 ip_ver; // 0: not used; 4: ipv4; 6: ipv6.
-+ /* hash key of the connection */
-+ __u16 source;
-+ __u16 dest;
-+ __u32 saddr[4];
-+ __u32 daddr[4];
-+
-+ __u32 seq;
-+ __u32 ack_seq;
-+
-+ /* these fields are used to set TOE QHDR */
-+ __u32 ack_threshold;
-+ __u32 seq_threshold;
-+ __u16 max_pktsize;
-+
-+ /* used by sw toe, accumulated ack_seq of ack frames */
-+ __u16 ack_cnt;
-+ /* used by sw toe, accumulated data frames held at driver */
-+ __u16 cur_pktsize;
-+
-+ __u8 status;
-+#define TCP_CONN_UNDEFINE 0X00
-+#define TCP_CONN_CREATION 0X01
-+#define TCP_CONN_CONNECTING 0X02
-+#define TCP_CONN_ESTABLISHED 0X04
-+#define TCP_CONN_RESET 0X08 // this is used for out-of-order
-+ // or congestion window is small
-+#define TCP_CONN_CLOSING 0X10
-+#define TCP_CONN_CLOSED 0x11
-+
-+ __u16 hash_entry_index; /* associated hash entry */
-+
-+ // one timer per connection. Otherwise all connections should be scanned
-+ // in a timeout interrupt, and timeout interrupt is triggered no matter
-+ // a connection is actually timeout or not.
-+ struct timer_list rx_timer;
-+ unsigned long last_rx_jiffies;
-+ GMAC_INFO_T *gmac;
-+ struct net_device *dev;
-+
-+ // for generating pure ack frame.
-+ struct ethhdr l2_hdr;
-+ struct iphdr l3_hdr;
-+
-+ spinlock_t conn_lock;
-+ DMA_RWPTR_T toeq_rwptr;
-+ GMAC_RXDESC_T *curr_desc;
-+ struct sk_buff *curr_rx_skb;
-+};
-+
-+struct jumbo_frame {
-+ struct sk_buff *skb0; // the head of jumbo frame
-+ struct sk_buff *tail; // the tail of jumbo frame
-+ struct iphdr *iphdr0; // the ip hdr of skb0.
-+ struct tcphdr *tcphdr0; // the tcp hdr of skb0.
-+};
-+
-+#endif // __SL351x_TOE_H
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -2131,6 +2131,42 @@ config ACENIC_OMIT_TIGON_I
-
- The safe and default value for this is N.
-
-+config NET_GMAC
-+ tristate "Storlink Gigabit Ethernet support"
-+ depends on ARCH_SL2312
-+ help
-+ This driver supports Storlink dual Gigabit Ethernet.
-+
-+config NET_SL2312
-+ tristate "Storlink Gigabit Ethernet support"
-+ depends on NET_GMAC
-+ help
-+ This driver supports Storlink dual Gigabit Ethernet.
-+
-+config NET_SL351X
-+ tristate "Storlink Lepus Gigabit Ethernet support"
-+ depends on NET_GMAC
-+ help
-+ This driver supports Storlink TOE and NAT dual Gigabit Ethernet.
-+
-+config SL2312_TSO
-+ bool "Tx Segmentation Enable"
-+ depends on NET_GMAC
-+ help
-+ TBD
-+
-+config SL2312_MPAGE
-+ bool "Tx Multipage Enable"
-+ depends on NET_GMAC
-+ help
-+ TBD
-+
-+config SL2312_RECVFILE
-+ bool "Rx Multipage Enable"
-+ depends on NET_GMAC
-+ help
-+ TBD
-+
- config DL2K
- tristate "D-Link DL2000-based Gigabit Ethernet support"
- depends on PCI
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -236,4 +236,8 @@ obj-$(CONFIG_NETCONSOLE) += netconsole.o
-
- obj-$(CONFIG_FS_ENET) += fs_enet/
-
--obj-$(CONFIG_NETXEN_NIC) += netxen/
-+
-+obj-$(CONFIG_NET_SL351X)+= sl351x_gmac.o sl351x_nat.o sl351x_hash.o sl351x_crc16.o sl351x_proc.o sl_switch.o
-+obj-$(CONFIG_NET_SL2312)+= sl2312_emac.o
-+
-+
diff --git a/target/linux/storm/patches/003-gmac_one_phy.patch b/target/linux/storm/patches/003-gmac_one_phy.patch
deleted file mode 100644
index 15a69c905e..0000000000
--- a/target/linux/storm/patches/003-gmac_one_phy.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/include/asm-arm/arch-sl2312/sl351x_gmac.h
-+++ b/include/asm-arm/arch-sl2312/sl351x_gmac.h
-@@ -21,7 +21,7 @@
- #undef BIG_ENDIAN
- #define BIG_ENDIAN 0
- #define GMAC_DEBUG 1
--#define GMAC_NUM 2
-+#define GMAC_NUM 1
- //#define L2_jumbo_frame 1
-
- #define _PACKED_ __attribute__ ((aligned(1), packed))
diff --git a/target/linux/storm/patches/004-gmac_enable_napi.patch b/target/linux/storm/patches/004-gmac_enable_napi.patch
deleted file mode 100644
index dd87e88fcc..0000000000
--- a/target/linux/storm/patches/004-gmac_enable_napi.patch
+++ /dev/null
@@ -1,81 +0,0 @@
---- a/drivers/net/sl351x_gmac.c
-+++ b/drivers/net/sl351x_gmac.c
-@@ -68,9 +68,11 @@
- #include <linux/ip.h>
- #endif
-
-+/* Enables NAPI unconditionally */
-+#define CONFIG_SL_NAPI 1
-+
- // #define SL351x_TEST_WORKAROUND
- #ifdef CONFIG_SL351x_NAT
--#define CONFIG_SL_NAPI 1
- #endif
- #define GMAX_TX_INTR_DISABLED 1
- #define DO_HW_CHKSUM 1
-@@ -124,12 +126,17 @@ static char _debug_prefetch_buf[_DEBUG_P
- *************************************************************/
- static int gmac_initialized = 0;
- TOE_INFO_T toe_private_data;
--//static int do_again = 0;
-+static int do_again = 0;
- spinlock_t gmac_fq_lock;
- unsigned int FLAG_SWITCH;
-
- static unsigned int next_tick = 3 * HZ;
--static unsigned char eth_mac[CONFIG_MAC_NUM][6]= {{0x00,0x11,0x11,0x87,0x87,0x87}, {0x00,0x22,0x22,0xab,0xab,0xab}};
-+static unsigned char eth_mac[CONFIG_MAC_NUM][6]= {
-+ {0x00,0x11,0x11,0x87,0x87,0x87},
-+#if GMAC_NUM != 1
-+ {0x00,0x22,0x22,0xab,0xab,0xab}
-+#endif
-+};
-
- #undef CONFIG_SL351x_RXTOE
- extern NAT_CFG_T nat_cfg;
-@@ -2443,7 +2450,8 @@ static irqreturn_t toe_gmac_interrupt (i
- toe = (TOE_INFO_T *)&toe_private_data;
- // handle NAPI
- #ifdef CONFIG_SL_NAPI
--if (storlink_ctl.pauseoff == 1)
-+ /* XXX: check this, changed from 'storlink_ctl.pauseoff == 1' to if (1) */
-+if (1)
- {
- /* disable GMAC interrupt */
- //toe_gmac_disable_interrupt(tp->irq);
-@@ -2530,7 +2538,7 @@ if (storlink_ctl.pauseoff == 1)
- {
- if (likely(netif_rx_schedule_prep(dev)))
- {
-- unsigned int data32;
-+ // unsigned int data32;
- // disable GMAC-0 rx interrupt
- // class-Q & TOE-Q are implemented in future
- //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-@@ -2563,7 +2571,7 @@ if (storlink_ctl.pauseoff == 1)
- {
- if (likely(netif_rx_schedule_prep(dev)))
- {
-- unsigned int data32;
-+ // unsigned int data32;
- // disable GMAC-0 rx interrupt
- // class-Q & TOE-Q are implemented in future
- //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-@@ -4217,7 +4225,7 @@ static int gmac_rx_poll(struct net_devic
- GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
- unsigned int status4;
- volatile DMA_RWPTR_T fq_rwptr;
-- int max_cnt = TOE_SW_FREEQ_DESC_NUM;//TOE_SW_FREEQ_DESC_NUM = 64
-+ // int max_cnt = TOE_SW_FREEQ_DESC_NUM;//TOE_SW_FREEQ_DESC_NUM = 64
- //unsigned long rx_old_bytes;
- struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
- //unsigned long long rx_time;
-@@ -4479,7 +4487,7 @@ static int gmac_rx_poll(struct net_devic
-
- if (rwptr.bits.rptr == rwptr.bits.wptr)
- {
-- unsigned int data32;
-+ // unsigned int data32;
- //printk("%s:---[rwptr.bits.rptr == rwptr.bits.wptr] rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
-
- /* Receive descriptor is empty now */
diff --git a/target/linux/storm/patches/005-gmac_napi_mask_intrs.patch b/target/linux/storm/patches/005-gmac_napi_mask_intrs.patch
deleted file mode 100644
index ba4caad203..0000000000
--- a/target/linux/storm/patches/005-gmac_napi_mask_intrs.patch
+++ /dev/null
@@ -1,248 +0,0 @@
---- a/drivers/net/sl351x_gmac.c
-+++ b/drivers/net/sl351x_gmac.c
-@@ -127,6 +127,7 @@ static char _debug_prefetch_buf[_DEBUG_P
- static int gmac_initialized = 0;
- TOE_INFO_T toe_private_data;
- static int do_again = 0;
-+static int rx_poll_enabled;
- spinlock_t gmac_fq_lock;
- unsigned int FLAG_SWITCH;
-
-@@ -1065,7 +1066,8 @@ static void toe_init_gmac(struct net_dev
- tp->intr3_enabled = 0xffffffff;
- tp->intr4_selected = GMAC0_INT_BITS | CLASS_RX_FULL_INT_BITS |
- HWFQ_EMPTY_INT_BIT | SWFQ_EMPTY_INT_BIT;
-- tp->intr4_enabled = GMAC0_INT_BITS | SWFQ_EMPTY_INT_BIT;
-+ tp->intr4_enabled = GMAC0_INT_BITS | SWFQ_EMPTY_INT_BIT| GMAC0_RX_OVERRUN_INT_BIT;
-+ // GMAC0_TX_PAUSE_OFF_INT_BIT| GMAC0_MIB_INT_BIT;
-
- data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) & ~tp->intr0_selected;
- writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
-@@ -1115,7 +1117,7 @@ static void toe_init_gmac(struct net_dev
- tp->intr3_enabled |= 0xffffffff;
- tp->intr4_selected |= CLASS_RX_FULL_INT_BITS |
- HWFQ_EMPTY_INT_BIT | SWFQ_EMPTY_INT_BIT;
-- tp->intr4_enabled |= SWFQ_EMPTY_INT_BIT;
-+ tp->intr4_enabled |= SWFQ_EMPTY_INT_BIT | GMAC1_RX_OVERRUN_INT_BIT;
- }
- data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) | tp->intr0_selected;
- writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
-@@ -2408,7 +2410,7 @@ static inline void toe_gmac_fill_free_q(
- // unsigned short max_cnt=TOE_SW_FREEQ_DESC_NUM>>1;
-
- fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-- spin_lock_irqsave(&gmac_fq_lock, flags);
-+ // spin_lock_irqsave(&gmac_fq_lock, flags);
- //while ((max_cnt--) && (unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
- // TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) {
- while ((unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
-@@ -2428,10 +2430,47 @@ static inline void toe_gmac_fill_free_q(
- SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
- toe_private_data.fq_rx_rwptr.bits32 = fq_rwptr.bits32;
- }
-- spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+ // spin_unlock_irqrestore(&gmac_fq_lock, flags);
- }
- // EXPORT_SYMBOL(toe_gmac_fill_free_q);
-
-+static void gmac_registers(const char *message)
-+{
-+ unsigned int status0;
-+ unsigned int status1;
-+ unsigned int status2;
-+ unsigned int status3;
-+ unsigned int status4;
-+
-+ printk("%s\n", message);
-+
-+ status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
-+ status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
-+ status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
-+ status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
-+ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+
-+ printk("status: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
-+ status0, status1, status2, status3, status4);
-+
-+ status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_0_REG);
-+ status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+ status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_2_REG);
-+ status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_3_REG);
-+ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+
-+ printk("mask : s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
-+ status0, status1, status2, status3, status4);
-+
-+ status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
-+ status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG);
-+ status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG);
-+ status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
-+ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+
-+ printk("select: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
-+ status0, status1, status2, status3, status4);
-+}
- /*----------------------------------------------------------------------
- * toe_gmac_interrupt
- *----------------------------------------------------------------------*/
-@@ -2492,6 +2531,7 @@ if (1)
- writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG);
- if (status4)
- writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
-+
- #if 0
- /* handle freeq interrupt first */
- if (status4 & tp->intr4_enabled) {
-@@ -2536,10 +2576,31 @@ if (1)
- }
- if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT))
- {
-- if (likely(netif_rx_schedule_prep(dev)))
-+ if (!rx_poll_enabled && likely(netif_rx_schedule_prep(dev)))
- {
-- // unsigned int data32;
-- // disable GMAC-0 rx interrupt
-+ unsigned int data32;
-+
-+ if (rx_poll_enabled)
-+ gmac_registers("check #1");
-+
-+ BUG_ON(rx_poll_enabled == 1);
-+
-+#if 0
-+ /* Masks GMAC-0 rx interrupt */
-+ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+ data32 &= ~(DEFAULT_Q0_INT_BIT);
-+ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+
-+ /* Masks GMAC-0 queue empty interrupt */
-+ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+ data32 &= ~DEFAULT_Q0_INT_BIT;
-+ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+
-+ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+ data32 &= ~DEFAULT_Q0_INT_BIT;
-+ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+#endif
-+
- // class-Q & TOE-Q are implemented in future
- //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
- //data32 &= ~DEFAULT_Q0_INT_BIT;
-@@ -2549,7 +2610,8 @@ if (1)
- //tp->total_q_cnt_napi=0;
- //rx_time = jiffies;
- //rx_old_bytes = isPtr->rx_bytes;
-- __netif_rx_schedule(dev);
-+ __netif_rx_schedule(dev);
-+ rx_poll_enabled = 1;
- }
- }
- }
-@@ -2569,9 +2631,31 @@ if (1)
-
- if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
- {
-- if (likely(netif_rx_schedule_prep(dev)))
-+ if (!rx_poll_enabled && likely(netif_rx_schedule_prep(dev)))
- {
-- // unsigned int data32;
-+ unsigned int data32;
-+
-+ if (rx_poll_enabled)
-+ gmac_registers("check #2");
-+
-+ BUG_ON(rx_poll_enabled == 1);
-+
-+#if 0
-+ /* Masks GMAC-1 rx interrupt */
-+ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+ data32 &= ~(DEFAULT_Q1_INT_BIT);
-+ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+
-+ /* Masks GMAC-1 queue empty interrupt */
-+ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+ data32 &= ~DEFAULT_Q1_INT_BIT;
-+ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+
-+ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+ data32 &= ~DEFAULT_Q1_INT_BIT;
-+ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+#endif
-+
- // disable GMAC-0 rx interrupt
- // class-Q & TOE-Q are implemented in future
- //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-@@ -2583,9 +2667,13 @@ if (1)
- //rx_time = jiffies;
- //rx_old_bytes = isPtr->rx_bytes;
- __netif_rx_schedule(dev);
-+ rx_poll_enabled = 1;
- }
- }
- }
-+ } else {
-+
-+ gmac_registers("check #3");
- }
-
- // Interrupt Status 0
-@@ -3306,8 +3394,10 @@ next_rx:
- SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
- tp->rx_rwptr.bits32 = rwptr.bits32;
-
-- toe_gmac_fill_free_q();
- }
-+
-+ /* Handles first available packets only then refill the queue. */
-+ toe_gmac_fill_free_q();
- }
-
- /*----------------------------------------------------------------------
-@@ -4217,6 +4307,7 @@ static int gmac_rx_poll(struct net_devic
- GMAC_RXDESC_T *curr_desc;
- struct sk_buff *skb;
- DMA_RWPTR_T rwptr;
-+ unsigned int data32;
- unsigned int pkt_size;
- unsigned int desc_count;
- unsigned int good_frame, chksum_status, rx_status;
-@@ -4231,7 +4322,7 @@ static int gmac_rx_poll(struct net_devic
- //unsigned long long rx_time;
-
-
--
-+ BUG_ON(rx_poll_enabled == 0);
- #if 1
- if (do_again)
- {
-@@ -4516,6 +4607,30 @@ static int gmac_rx_poll(struct net_devic
- #endif
- //toe_gmac_fill_free_q();
- netif_rx_complete(dev);
-+
-+ rx_poll_enabled = 0;
-+
-+ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+ if (tp->port_id == 0)
-+ data32 |= DEFAULT_Q0_INT_BIT;
-+ else
-+ data32 |= DEFAULT_Q1_INT_BIT;
-+ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+
-+ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+ if (tp->port_id == 0)
-+ data32 |= DEFAULT_Q0_INT_BIT;
-+ else
-+ data32 |= DEFAULT_Q1_INT_BIT;
-+ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+
-+ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+ if (tp->port_id == 0)
-+ data32 |= DEFAULT_Q0_INT_BIT;
-+ else
-+ data32 |= DEFAULT_Q1_INT_BIT;
-+ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+
- // enable GMAC-0 rx interrupt
- // class-Q & TOE-Q are implemented in future
- //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
diff --git a/target/linux/storm/patches/006-gmac_napi_tx.patch b/target/linux/storm/patches/006-gmac_napi_tx.patch
deleted file mode 100644
index 744109201e..0000000000
--- a/target/linux/storm/patches/006-gmac_napi_tx.patch
+++ /dev/null
@@ -1,2094 +0,0 @@
---- a/drivers/net/sl351x_gmac.c
-+++ b/drivers/net/sl351x_gmac.c
-@@ -43,9 +43,13 @@
-
- #include <linux/mtd/kvctl.h>
-
-+#define GET_RPTR(x) ((x) & 0xFFFF)
-+#define GET_WPTR(x) ((x) >> 16)
-+
- #define MIDWAY
- #define SL_LEPUS
--#define VITESSE_G5SWITCH 1
-+// #define VITESSE_G5SWITCH 1
-+#undef VITESSE_G5SWITCH
-
- #ifndef CONFIG_SL351x_RXTOE
- //#define CONFIG_SL351x_RXTOE 1
-@@ -126,7 +130,6 @@ static char _debug_prefetch_buf[_DEBUG_P
- *************************************************************/
- static int gmac_initialized = 0;
- TOE_INFO_T toe_private_data;
--static int do_again = 0;
- static int rx_poll_enabled;
- spinlock_t gmac_fq_lock;
- unsigned int FLAG_SWITCH;
-@@ -190,7 +193,7 @@ void mac_get_sw_tx_weight(struct net_dev
- void mac_set_sw_tx_weight(struct net_device *dev, char *weight);
- void mac_get_hw_tx_weight(struct net_device *dev, char *weight);
- void mac_set_hw_tx_weight(struct net_device *dev, char *weight);
--static inline void toe_gmac_fill_free_q(void);
-+static inline void toe_gmac_fill_free_q(int count);
-
- #ifdef VITESSE_G5SWITCH
- extern int Get_Set_port_status(void);
-@@ -295,12 +298,14 @@ static int __init gmac_init_module(void)
- for(j = 0; i<CONFIG_MAC_NUM; j++)
- {
- i=j;
-+#ifdef VITESSE_G5SWITCH
- if(Giga_switch){ // if gswitch present, swap eth0/1
- if(j==0)
- i=1;
- else if(j==1)
- i=0;
- }
-+#endif
-
- tp = (GMAC_INFO_T *)&toe_private_data.gmac[i];
- tp->dev = NULL;
-@@ -459,7 +464,7 @@ void mac_init_drv(void)
- toe->gmac[1].dma_base_addr = TOE_GMAC1_DMA_BASE;
- toe->gmac[0].auto_nego_cfg = 1;
- toe->gmac[1].auto_nego_cfg = 1;
--#ifdef CONFIG_SL3516_ASIC
-+#ifndef CONFIG_SL3516_ASIC
- toe->gmac[0].speed_cfg = GMAC_SPEED_1000;
- toe->gmac[1].speed_cfg = GMAC_SPEED_1000;
- #else
-@@ -508,7 +513,7 @@ void mac_init_drv(void)
- // Write GLOBAL_QUEUE_THRESHOLD_REG
- threshold.bits32 = 0;
- threshold.bits.swfq_empty = (TOE_SW_FREEQ_DESC_NUM > 256) ? 255 :
-- TOE_SW_FREEQ_DESC_NUM/2;
-+ TOE_SW_FREEQ_DESC_NUM/16;
- threshold.bits.hwfq_empty = (TOE_HW_FREEQ_DESC_NUM > 256) ? 256/4 :
- TOE_HW_FREEQ_DESC_NUM/4;
- threshold.bits.toe_class = (TOE_TOE_DESC_NUM > 256) ? 256/4 :
-@@ -613,18 +618,25 @@ static void toe_init_free_queue(void)
- rwptr_reg.bits.rptr = 0;
- toe->fq_rx_rwptr.bits32 = rwptr_reg.bits32;
- writel(rwptr_reg.bits32, TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+ printk("SWFQ: %08X\n", readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG));
-
- // SW Free Queue Descriptors
- for (i=0; i<TOE_SW_FREEQ_DESC_NUM; i++)
- {
-+ void *data = NULL;
- sw_desc_ptr->word0.bits.buffer_size = SW_RX_BUF_SIZE;
-- sw_desc_ptr->word1.bits.sw_id = i; // used to locate skb
-+ sw_desc_ptr->word1.bits.sw_id = 0; // used to locate skb
- if ( (skb = dev_alloc_skb(SW_RX_BUF_SIZE))==NULL) /* allocate socket buffer */
- {
- printk("%s::skb buffer allocation fail !\n",__func__); while(1);
- }
-- REG32(skb->data) = (unsigned int)skb;
-+
-+ data = skb->data;
- skb_reserve(skb, SKB_RESERVE_BYTES);
-+
-+ REG32(data + 0) = (unsigned int)skb;
-+ REG32(data + 4) = (unsigned short)i;
-+
- // toe->rx_skb[i] = skb;
- sw_desc_ptr->word2.buf_adr = (unsigned int)__pa(skb->data);
- // consistent_sync((unsigned int)desc_ptr, sizeof(GMAC_RXDESC_T), PCI_DMA_TODEVICE);
-@@ -851,14 +863,14 @@ static void toe_init_hwtx_queue(void)
- *----------------------------------------------------------------------*/
- static void toe_init_default_queue(void)
- {
-- TOE_INFO_T *toe;
-+ TOE_INFO_T *toe;
- volatile NONTOE_QHDR_T *qhdr;
-- GMAC_RXDESC_T *desc_ptr;
-- DMA_SKB_SIZE_T skb_size;
-+ GMAC_RXDESC_T *desc_ptr;
-+ DMA_SKB_SIZE_T skb_size;
-
- toe = (TOE_INFO_T *)&toe_private_data;
- desc_ptr = (GMAC_RXDESC_T *)DMA_MALLOC((TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_RXDESC_T)),
-- (dma_addr_t *)&toe->gmac[0].default_desc_base_dma);
-+ (dma_addr_t *)&toe->gmac[0].default_desc_base_dma);
- if (!desc_ptr)
- {
- printk("%s::DMA_MALLOC fail !\n",__func__);
-@@ -866,14 +878,17 @@ static void toe_init_default_queue(void)
- }
- memset((void *)desc_ptr, 0, TOE_DEFAULT_Q0_DESC_NUM * sizeof(GMAC_RXDESC_T));
- toe->gmac[0].default_desc_base = (unsigned int)desc_ptr;
-+ printk("toe->gmac[0].default_desc_base_dma: %08X\n", toe->gmac[0].default_desc_base_dma);
-+
- toe->gmac[0].default_desc_num = TOE_DEFAULT_Q0_DESC_NUM;
- qhdr = (volatile NONTOE_QHDR_T *)TOE_DEFAULT_Q0_HDR_BASE;
- qhdr->word0.base_size = ((unsigned int)toe->gmac[0].default_desc_base_dma & NONTOE_QHDR0_BASE_MASK) | TOE_DEFAULT_Q0_DESC_POWER;
- qhdr->word1.bits32 = 0;
- toe->gmac[0].rx_rwptr.bits32 = 0;
- toe->gmac[0].default_qhdr = (NONTOE_QHDR_T *)qhdr;
-+
- desc_ptr = (GMAC_RXDESC_T *)DMA_MALLOC((TOE_DEFAULT_Q1_DESC_NUM * sizeof(GMAC_RXDESC_T)),
-- (dma_addr_t *)&toe->gmac[1].default_desc_base_dma);
-+ (dma_addr_t *)&toe->gmac[1].default_desc_base_dma);
- if (!desc_ptr)
- {
- printk("%s::DMA_MALLOC fail !\n",__func__);
-@@ -1071,12 +1086,16 @@ static void toe_init_gmac(struct net_dev
-
- data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG) & ~tp->intr0_selected;
- writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_0_REG);
-+
- data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG) & ~tp->intr1_selected;
- writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_1_REG);
-+
- data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG) & ~tp->intr2_selected;
- writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_2_REG);
-+
- data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG) & ~tp->intr3_selected;
- writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
-+
- data = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG) & ~tp->intr4_selected;
- writel(data, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
- }
-@@ -1176,11 +1195,11 @@ static int toe_gmac_init_chip(struct net
- GMAC_CONFIG2_T config2_val;
- GMAC_CONFIG0_T config0,config0_mask;
- GMAC_CONFIG1_T config1;
-- #ifdef CONFIG_SL351x_NAT
- GMAC_CONFIG3_T config3_val;
-- #endif
- GMAC_TX_WCR0_T hw_weigh;
- GMAC_TX_WCR1_T sw_weigh;
-+
-+ uint32_t weight = 0;
- // GMAC_HASH_ENABLE_REG0_T hash_ctrl;
- //
- #if 0 /* mac address will be set in late_initcall */
-@@ -1202,24 +1221,23 @@ static int toe_gmac_init_chip(struct net
- // config1.bits32 = 0x002004; //next version
- /* set flow control threshold */
- config1.bits32 = 0;
-- config1.bits.set_threshold = 32 / 2;
-- config1.bits.rel_threshold = 32 / 4 * 3;
-+ config1.bits.set_threshold = (32 / 2);
-+ config1.bits.rel_threshold = (32 / 4) * 3;
- gmac_write_reg(tp->base_addr, GMAC_CONFIG1, config1.bits32, 0xffffffff);
-
-- /* set flow control threshold */
-+ /* TODO: set flow control threshold */
- config2_val.bits32 = 0;
-- config2_val.bits.set_threshold = TOE_SW_FREEQ_DESC_NUM/2;
-- config2_val.bits.rel_threshold = TOE_SW_FREEQ_DESC_NUM*3/4;
-+ config2_val.bits.set_threshold = TOE_SW_FREEQ_DESC_NUM/4;
-+ config2_val.bits.rel_threshold = TOE_SW_FREEQ_DESC_NUM/2;
- gmac_write_reg(tp->base_addr, GMAC_CONFIG2, config2_val.bits32,0xffffffff);
-
-- #ifdef CONFIG_SL351x_NAT
-- /* set HW free queue flow control threshold */
-+ /* TODO: set HW free queue flow control threshold */
- config3_val.bits32 = 0;
- config3_val.bits.set_threshold = PAUSE_SET_HW_FREEQ;
- config3_val.bits.rel_threshold = PAUSE_REL_HW_FREEQ;
- gmac_write_reg(tp->base_addr, GMAC_CONFIG3, config3_val.bits32,0xffffffff);
-- #endif
-- /* set_mcast_filter mask*/
-+
-+ /* TODO: set_mcast_filter mask*/
- // gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL0,0x0,0xffffffff);
- // gmac_write_reg(tp->base_addr,GMAC_MCAST_FIL1,0x0,0xffffffff);
-
-@@ -1249,7 +1267,7 @@ static int toe_gmac_init_chip(struct net
- config0.bits.dis_rx = 1; /* disable rx */
- config0.bits.dis_tx = 1; /* disable tx */
- config0.bits.loop_back = 0; /* enable/disable GMAC loopback */
-- config0.bits.rx_err_detect = 1;
-+ config0.bits.rx_err_detect = 1; /* TODO: was 1, means disabled, 0 enabled ! */
- config0.bits.rgmii_en = 0;
- config0.bits.rgmm_edge = 1;
- config0.bits.rxc_inv = 0;
-@@ -1342,6 +1360,9 @@ static int toe_gmac_init_chip(struct net
- gmac_write_reg(tp->dma_base_addr, GMAC_AHB_WEIGHT_REG, ahb_weight.bits32, ahb_weight_mask.bits32);
- #endif
-
-+ weight = gmac_read_reg(tp->dma_base_addr, GMAC_AHB_WEIGHT_REG);
-+ printk("====> %08X\n", weight);
-+
- #if defined(CONFIG_SL351x_NAT) || defined(CONFIG_SL351x_RXTOE)
- gmac_write_reg(tp->dma_base_addr, GMAC_SPR0, IPPROTO_TCP, 0xffffffff);
- #endif
-@@ -1552,7 +1573,7 @@ static void toe_gmac_tx_complete(GMAC_I
- rwptr.bits32 = readl(swtxq->rwptr_reg);
- if (rwptr.bits.rptr == swtxq->finished_idx)
- break;
-- curr_desc = (volatile GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
-+ curr_desc = (volatile GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
- // consistent_sync((void *)curr_desc, sizeof(GMAC_TXDESC_T), PCI_DMA_FROMDEVICE);
- word0.bits32 = curr_desc->word0.bits32;
- word1.bits32 = curr_desc->word1.bits32;
-@@ -1573,6 +1594,7 @@ static void toe_gmac_tx_complete(GMAC_I
- swtxq->finished_idx = RWPTR_ADVANCE_ONE(swtxq->finished_idx, swtxq->total_desc_num);
- curr_desc = (GMAC_TXDESC_T *)swtxq->desc_base + swtxq->finished_idx;
- word0.bits32 = curr_desc->word0.bits32;
-+
- #ifdef _DUMP_TX_TCP_CONTENT
- if (curr_desc->word0.bits.buffer_size < 16)
- {
-@@ -1592,12 +1614,12 @@ static void toe_gmac_tx_complete(GMAC_I
- word0.bits.status_tx_ok = 0;
- if (swtxq->tx_skb[swtxq->finished_idx])
- {
-- if (interrupt)
-- dev_kfree_skb_irq(swtxq->tx_skb[swtxq->finished_idx]);
-- else
-- dev_kfree_skb(swtxq->tx_skb[swtxq->finished_idx]);
-+ dev_kfree_skb(swtxq->tx_skb[swtxq->finished_idx]);
- swtxq->tx_skb[swtxq->finished_idx] = NULL;
-+ } else {
-+ BUG();
- }
-+
- curr_desc->word0.bits32 = word0.bits32;
- swtxq->curr_finished_desc = (GMAC_TXDESC_T *)curr_desc;
- swtxq->total_finished++;
-@@ -1624,31 +1646,29 @@ static void toe_gmac_tx_complete(GMAC_I
- *----------------------------------------------------------------------*/
- static int gmac_start_xmit(struct sk_buff *skb, struct net_device *dev)
- {
-- GMAC_INFO_T *tp= dev->priv;
--// static unsigned int pcount = 0;
--// unsigned int tx_qid;
-- DMA_RWPTR_T rwptr;
-- volatile GMAC_TXDESC_T *curr_desc;
-- int snd_pages = skb_shinfo(skb)->nr_frags + 1; /* get number of descriptor */
-- int frag_id = 0;
-- int len, total_len = skb->len;
-+ GMAC_INFO_T *tp= dev->priv;
-+ DMA_RWPTR_T rwptr;
-+ GMAC_TXDESC_T *curr_desc;
-+ int snd_pages = skb_shinfo(skb)->nr_frags + 1; /* get number of descriptor */
-+ int frag_id = 0;
-+ int len, total_len = skb->len;
- struct net_device_stats *isPtr;
-- unsigned int free_desc;
-- GMAC_SWTXQ_T *swtxq;
-+ unsigned int free_desc;
-+ GMAC_SWTXQ_T *swtxq;
- register unsigned long word0, word1, word2, word3;
- unsigned short wptr, rptr;
- #ifdef L2_jumbo_frame
- int header_len = skb->len;
- struct iphdr *ip_hdr;
-- struct tcphdr *tcp_hdr;
-- int tcp_hdr_len;
-- unsigned char *ptr;
-- int data_len,a;
-- unsigned int val;
-+ struct tcphdr *tcp_hdr;
-+ int tcp_hdr_len;
-+ unsigned char *ptr;
-+ int data_len,a;
-+ unsigned int val;
- #endif
-
- #ifdef GMAC_LEN_1_2_ISSUE
-- int total_pages;
-+ int total_pages;
- total_pages = snd_pages;
- #endif
-
-@@ -1664,13 +1684,6 @@ static int gmac_start_xmit(struct sk_buf
- }
- #endif
-
--#if 0
-- if (storlink_ctl.recvfile==2)
-- {
-- printk("snd_pages=%d skb->len=%d\n",snd_pages,skb->len);
-- }
--#endif
--
- #ifdef GMAC_USE_TXQ0
- #define tx_qid 0
- #endif
-@@ -1703,9 +1716,9 @@ static int gmac_start_xmit(struct sk_buf
- toe_gmac_tx_complete(tp, tx_qid, dev, 0);
-
- if (wptr >= swtxq->finished_idx)
-- free_desc = swtxq->total_desc_num - wptr - 1 + swtxq->finished_idx;
-+ free_desc = swtxq->total_desc_num - wptr + swtxq->finished_idx;
- else
-- free_desc = swtxq->finished_idx - wptr - 1;
-+ free_desc = swtxq->finished_idx - wptr;
- if (free_desc < snd_pages)
- {
- // spin_unlock(&tp->tx_mutex);
-@@ -2063,9 +2076,10 @@ void mac_start_txdma(struct net_device *
- struct net_device_stats * gmac_get_stats(struct net_device *dev)
- {
- GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
-+#if 0 /* don't read stats from hardware, scary numbers. */
- // unsigned int flags;
-- unsigned int pkt_drop;
-- unsigned int pkt_error;
-+ unsigned int pkt_drop = 0;
-+ unsigned int pkt_error = 0;
-
- if (netif_running(dev))
- {
-@@ -2073,10 +2087,14 @@ struct net_device_stats * gmac_get_stats
- // spin_lock_irqsave(&tp->lock,flags);
- pkt_drop = gmac_read_reg(tp->base_addr,GMAC_IN_DISCARDS);
- pkt_error = gmac_read_reg(tp->base_addr,GMAC_IN_ERRORS);
-+ printk("**** stack: %lu, hw: %lu\n", tp->ifStatics.rx_dropped, pkt_drop);
-+
- tp->ifStatics.rx_dropped = tp->ifStatics.rx_dropped + pkt_drop;
- tp->ifStatics.rx_errors = tp->ifStatics.rx_errors + pkt_error;
- // spin_unlock_irqrestore(&tp->lock,flags);
- }
-+#endif
-+
- return &tp->ifStatics;
- }
-
-@@ -2401,36 +2419,63 @@ static int gmac_close(struct net_device
- * toe_gmac_fill_free_q
- * allocate buffers for free queue.
- *----------------------------------------------------------------------*/
--static inline void toe_gmac_fill_free_q(void)
-+static inline void toe_gmac_fill_free_q(int count)
- {
- struct sk_buff *skb;
- volatile DMA_RWPTR_T fq_rwptr;
- volatile GMAC_RXDESC_T *fq_desc;
-- unsigned long flags;
-+ unsigned long flags;
-+ unsigned short index;
-+ int filled = 0;
-+ static int entered;
- // unsigned short max_cnt=TOE_SW_FREEQ_DESC_NUM>>1;
-
-+ BUG_ON(entered == 1);
-+
-+ entered = 1;
-+
-+
- fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
- // spin_lock_irqsave(&gmac_fq_lock, flags);
- //while ((max_cnt--) && (unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
- // TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) {
-- while ((unsigned short)RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
-- TOE_SW_FREEQ_DESC_NUM) != fq_rwptr.bits.rptr) {
-+ index = fq_rwptr.bits.wptr;
-+#if 0
-+ printk("wptr: %hu, rptr: %hu, refill idx: %hu\n",
-+ GET_RPTR(fq_rwptr.bits32),
-+ GET_WPTR(fq_rwptr.bits32),
-+ index);
-+#endif
-+
-+ index = RWPTR_ADVANCE_ONE(index, TOE_SW_FREEQ_DESC_NUM);
-+ fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base + index;
-+ while (fq_desc->word2.buf_adr == 0) {
-+ void *data = NULL;
-+
- if ((skb = dev_alloc_skb(SW_RX_BUF_SIZE)) == NULL) {
- printk("%s::skb allocation fail!\n", __func__);
-- //while(1);
-- break;
-+ goto out;
- }
-- REG32(skb->data) = (unsigned int)skb;
-+ ++ filled;
-+ data = skb->data;
- skb_reserve(skb, SKB_RESERVE_BYTES);
-- // fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-- fq_rwptr.bits.wptr = RWPTR_ADVANCE_ONE(fq_rwptr.bits.wptr,
-- TOE_SW_FREEQ_DESC_NUM);
-- fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base+fq_rwptr.bits.wptr;
-+
-+ REG32(data + 0) = (unsigned int)skb;
-+ REG32(data + 4) = (unsigned short)index;
-+
-+ // printk("refill skb: %p, idx: %hu\n", skb, index);
- fq_desc->word2.buf_adr = (unsigned int)__pa(skb->data);
-- SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, fq_rwptr.bits.wptr);
-- toe_private_data.fq_rx_rwptr.bits32 = fq_rwptr.bits32;
-+ writel(0x07960202, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+ SET_WPTR(TOE_GLOBAL_BASE+GLOBAL_SWFQ_RWPTR_REG, index);
-+ writel(0x07960200, TOE_GMAC0_BASE+GMAC_CONFIG0);
-+
-+ index = RWPTR_ADVANCE_ONE(index, TOE_SW_FREEQ_DESC_NUM);
-+ fq_desc = (GMAC_RXDESC_T*)toe_private_data.swfq_desc_base+index;
- }
-+out:
- // spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+
-+ entered = 0;
- }
- // EXPORT_SYMBOL(toe_gmac_fill_free_q);
-
-@@ -2442,14 +2487,14 @@ static void gmac_registers(const char *m
- unsigned int status3;
- unsigned int status4;
-
-- printk("%s\n", message);
--
- status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
- status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
- status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
- status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
- status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-
-+ printk("%s\n", message);
-+
- printk("status: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
- status0, status1, status2, status3, status4);
-
-@@ -2468,8 +2513,9 @@ static void gmac_registers(const char *m
- status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_3_REG);
- status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-
-- printk("select: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
-- status0, status1, status2, status3, status4);
-+ if (status0 || status1 || status2 || status3 || status4)
-+ printk("select: s0:%08X, s1:%08X, s2:%08X, s3:%08X, s4:%08X\n",
-+ status0, status1, status2, status3, status4);
- }
- /*----------------------------------------------------------------------
- * toe_gmac_interrupt
-@@ -2485,75 +2531,44 @@ static irqreturn_t toe_gmac_interrupt (i
- unsigned int status3;
- unsigned int status4;
-
--// struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
- toe = (TOE_INFO_T *)&toe_private_data;
--// handle NAPI
--#ifdef CONFIG_SL_NAPI
-- /* XXX: check this, changed from 'storlink_ctl.pauseoff == 1' to if (1) */
--if (1)
--{
--/* disable GMAC interrupt */
-- //toe_gmac_disable_interrupt(tp->irq);
-
--// isPtr->interrupts++;
-+ if (0 && rx_poll_enabled) {
-+ gmac_registers("interrupt handler");
-+ }
-+
- /* read Interrupt status */
- status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
- status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
- status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
- status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
- status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-- // prompt warning if status bit ON but not enabled
-+
- #if 0
-- if (status0 & ~tp->intr0_enabled)
-- printk("Intr 0 Status error. status = 0x%X, enable = 0x%X\n",
-- status0, tp->intr0_enabled);
-- if (status1 & ~tp->intr1_enabled)
-- printk("Intr 1 Status error. status = 0x%X, enable = 0x%X\n",
-- status1, tp->intr1_enabled);
-- if (status2 & ~tp->intr2_enabled)
-- printk("Intr 2 Status error. status = 0x%X, enable = 0x%X\n",
-- status2, tp->intr2_enabled);
-- if (status3 & ~tp->intr3_enabled)
-- printk("Intr 3 Status error. status = 0x%X, enable = 0x%X\n",
-- status3, tp->intr3_enabled);
-- if (status4 & ~tp->intr4_enabled)
-- printk("Intr 4 Status error. status = 0x%X, enable = 0x%X\n",
-- status4, tp->intr4_enabled);
-+ /* handle freeq interrupt first */
-+ if (status4 & SWFQ_EMPTY_INT_BIT)
-+ {
-+ toe_gmac_fill_free_q();
-+ writel(status4 & SWFQ_EMPTY_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
-+ tp->sw_fq_empty_cnt++;
-+ }
- #endif
-
-+ if (status4 & GMAC0_MIB_INT_BIT)
-+ writel(GMAC0_MIB_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
-+
-+ if (status4 & GMAC0_RX_OVERRUN_INT_BIT)
-+ writel(GMAC0_RX_OVERRUN_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
-+
- if (status0)
- writel(status0 & tp->intr0_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_0_REG);
-- if (status1)
-- writel(status1 & tp->intr1_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_1_REG);
- if (status2)
- writel(status2 & tp->intr2_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_2_REG);
- if (status3)
- writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG);
-- if (status4)
-- writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
--
--#if 0
-- /* handle freeq interrupt first */
-- if (status4 & tp->intr4_enabled) {
-- if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
-- {
-- // unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-- //gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
-- // tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
--
-- if (toe->gmac[0].dev && netif_running(toe->gmac[0].dev))
-- toe_gmac_handle_default_rxq(toe->gmac[0].dev,&toe->gmac[0]);
-- if (toe->gmac[1].dev && netif_running(toe->gmac[1].dev))
-- toe_gmac_handle_default_rxq(toe->gmac[1].dev,&toe->gmac[1]);
-- printk("\nfreeq int\n");
-- toe_gmac_fill_free_q();
-- tp->sw_fq_empty_cnt++;
-
-- }
-- }
--#endif
- // Interrupt Status 1
-- if (status1 & tp->intr1_enabled)
-+ if ((status1 & 3) || (status4 & 1))
- {
- #define G1_INTR0_BITS (GMAC1_HWTQ13_EOF_INT_BIT | GMAC1_HWTQ12_EOF_INT_BIT | GMAC1_HWTQ11_EOF_INT_BIT | GMAC1_HWTQ10_EOF_INT_BIT)
- #define G0_INTR0_BITS (GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT | GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT)
-@@ -2563,7 +2578,7 @@ if (1)
- // because they should pass packets to upper layer
- if (tp->port_id == 0)
- {
-- if (netif_running(dev) && (status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS))
-+ if (((status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS)) || (status4 & 1))
- {
- if (status1 & GMAC0_HWTQ03_EOF_INT_BIT)
- tp->hwtxq[3].eof_cnt++;
-@@ -2574,50 +2589,51 @@ if (1)
- if (status1 & GMAC0_HWTQ00_EOF_INT_BIT)
- tp->hwtxq[0].eof_cnt++;
- }
-- if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT))
-+ if (status1 & DEFAULT_Q0_INT_BIT || status4 & 1)
-+ {
-+ if (likely(netif_rx_schedule_prep(dev)))
- {
-- if (!rx_poll_enabled && likely(netif_rx_schedule_prep(dev)))
-- {
-- unsigned int data32;
-+ unsigned int data32;
-+
-+ BUG_ON(rx_poll_enabled == 1);
-
-- if (rx_poll_enabled)
-- gmac_registers("check #1");
-+ /* Masks GMAC-0 rx interrupt */
-+ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+ data32 &= ~(DEFAULT_Q0_INT_BIT);
-+ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-
-- BUG_ON(rx_poll_enabled == 1);
-+ /* Masks GMAC-0 queue empty interrupt */
-+ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+ data32 &= ~DEFAULT_Q0_INT_BIT;
-+ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-
-+ __netif_rx_schedule(dev);
-+ rx_poll_enabled = 1;
-+ } else {
- #if 0
-- /* Masks GMAC-0 rx interrupt */
-- data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-- data32 &= ~(DEFAULT_Q0_INT_BIT);
-- writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
--
-- /* Masks GMAC-0 queue empty interrupt */
-- data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-- data32 &= ~DEFAULT_Q0_INT_BIT;
-- writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
--
-- data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-- data32 &= ~DEFAULT_Q0_INT_BIT;
-- writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
--#endif
--
-- // class-Q & TOE-Q are implemented in future
-- //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-- //data32 &= ~DEFAULT_Q0_INT_BIT;
-- //writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-- //printk("\%s: DEFAULT_Q0_INT_BIT===================>>>>>>>>>>>>\n",__func__);
-- writel(0x0, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
-- //tp->total_q_cnt_napi=0;
-- //rx_time = jiffies;
-- //rx_old_bytes = isPtr->rx_bytes;
-- __netif_rx_schedule(dev);
-- rx_poll_enabled = 1;
-- }
-+ unsigned int data32;
-+
-+ if (rx_poll_enabled)
-+ gmac_registers("->poll() running.");
-+ /* Masks GMAC-0 rx interrupt */
-+ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+ data32 &= ~(DEFAULT_Q0_INT_BIT);
-+ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+
-+ /* Masks GMAC-0 queue empty interrupt */
-+ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+ data32 &= ~DEFAULT_Q0_INT_BIT;
-+ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-+#endif
-+ }
-+ } else {
-+ if (0)
-+ gmac_registers("status1 & DEFAULT_Q0_INT_BIT || status4 & 1");
- }
- }
-- else if (tp->port_id == 1)
-+ else if (tp->port_id == 1 && netif_running(dev))
- {
-- if (netif_running(dev) && (status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS))
-+ if ((status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS))
- {
- if (status1 & GMAC1_HWTQ13_EOF_INT_BIT)
- tp->hwtxq[3].eof_cnt++;
-@@ -2629,14 +2645,14 @@ if (1)
- tp->hwtxq[0].eof_cnt++;
- }
-
-- if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
-+ if ((status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
- {
- if (!rx_poll_enabled && likely(netif_rx_schedule_prep(dev)))
-- {
-- unsigned int data32;
-+ {
-+ unsigned int data32;
-
- if (rx_poll_enabled)
-- gmac_registers("check #2");
-+ gmac_registers("check #2");
-
- BUG_ON(rx_poll_enabled == 1);
-
-@@ -2646,7 +2662,7 @@ if (1)
- data32 &= ~(DEFAULT_Q1_INT_BIT);
- writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-
-- /* Masks GMAC-1 queue empty interrupt */
-+ /* Masks GMAC-1 queue empty interrupt */
- data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
- data32 &= ~DEFAULT_Q1_INT_BIT;
- writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-@@ -2656,24 +2672,21 @@ if (1)
- writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
- #endif
-
-- // disable GMAC-0 rx interrupt
-- // class-Q & TOE-Q are implemented in future
-- //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-- //data32 &= ~DEFAULT_Q1_INT_BIT;
-+ // disable GMAC-0 rx interrupt
-+ // class-Q & TOE-Q are implemented in future
-+ //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+ //data32 &= ~DEFAULT_Q1_INT_BIT;
- //writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
- //printk("\%s: 1111111111--->DEFAULT_Q1_INT_BIT===================>>>>>>>>>>>>\n",__func__);
- writel(0x0, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
- //tp->total_q_cnt_napi=0;
- //rx_time = jiffies;
- //rx_old_bytes = isPtr->rx_bytes;
-- __netif_rx_schedule(dev);
-- rx_poll_enabled = 1;
-- }
-+ __netif_rx_schedule(dev);
-+ rx_poll_enabled = 1;
-+ }
- }
- }
-- } else {
--
-- gmac_registers("check #3");
- }
-
- // Interrupt Status 0
-@@ -2814,676 +2827,93 @@ if (1)
- }
- }
-
-- //toe_gmac_enable_interrupt(tp->irq);
--#ifdef IxscriptMate_1518
-- if (storlink_ctl.pauseoff == 1)
-- {
-- GMAC_CONFIG0_T config0;
-- config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-- config0.bits.dis_rx = 0;
-- writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-- config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-- config0.bits.dis_rx = 0;
-- writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-- }
--#endif
--// enable_irq(gmac_irq[dev_index]);
-- //printk("gmac_interrupt complete!\n\n");
--// return IRQ_RETVAL(handled);
- return IRQ_RETVAL(1);
- }
--else
--{
--#endif //endif NAPI
-
-+/*----------------------------------------------------------------------
-+* gmac_get_phy_vendor
-+*----------------------------------------------------------------------*/
-+static unsigned int gmac_get_phy_vendor(int phy_addr)
-+{
-+ unsigned int reg_val;
-+ reg_val=(mii_read(phy_addr,0x02) << 16) + mii_read(phy_addr,0x03);
-+ return reg_val;
-+}
-
-- /* disable GMAC interrupt */
-- toe_gmac_disable_interrupt(tp->irq);
-+/*----------------------------------------------------------------------
-+* gmac_set_phy_status
-+*----------------------------------------------------------------------*/
-+void gmac_set_phy_status(struct net_device *dev)
-+{
-+ GMAC_INFO_T *tp = dev->priv;
-+ GMAC_STATUS_T status;
-+ unsigned int reg_val, ability,wan_port_id;
-+ unsigned int i = 0;
-
--// isPtr->interrupts++;
-- /* read Interrupt status */
-- status0 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_0_REG);
-- status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
-- status2 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_2_REG);
-- status3 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_3_REG);
-- status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-- // prompt warning if status bit ON but not enabled
-+#ifdef VITESSE_G5SWITCH
-+ if((tp->port_id == GMAC_PORT1)&&(Giga_switch==1)){
- #if 0
-- if (status0 & ~tp->intr0_enabled)
-- printk("Intr 0 Status error. status = 0x%X, enable = 0x%X\n",
-- status0, tp->intr0_enabled);
-- if (status1 & ~tp->intr1_enabled)
-- printk("Intr 1 Status error. status = 0x%X, enable = 0x%X\n",
-- status1, tp->intr1_enabled);
-- if (status2 & ~tp->intr2_enabled)
-- printk("Intr 2 Status error. status = 0x%X, enable = 0x%X\n",
-- status2, tp->intr2_enabled);
-- if (status3 & ~tp->intr3_enabled)
-- printk("Intr 3 Status error. status = 0x%X, enable = 0x%X\n",
-- status3, tp->intr3_enabled);
-- if (status4 & ~tp->intr4_enabled)
-- printk("Intr 4 Status error. status = 0x%X, enable = 0x%X\n",
-- status4, tp->intr4_enabled);
--#endif
--#define INTERRUPT_SELECT 1
-- if (status0)
-- writel(status0 & tp->intr0_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_0_REG);
-- if (status1)
-- writel(status1 & tp->intr1_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_1_REG);
-- if (status2)
-- writel(status2 & tp->intr2_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_2_REG);
-- if (status3)
-- writel(status3 & tp->intr3_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_3_REG);
-- if (status4)
-- writel(status4 & tp->intr4_enabled, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
--
-- /* handle freeq interrupt first */
-- if (status4 & tp->intr4_enabled) {
-- if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
-- {
-- // unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-- //gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
-- // tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
--
-- //gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG,
-- // SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
-- if (toe->gmac[0].dev && netif_running(toe->gmac[0].dev))
-- toe_gmac_handle_default_rxq(toe->gmac[0].dev,&toe->gmac[0]);
-- if (toe->gmac[1].dev && netif_running(toe->gmac[1].dev))
-- toe_gmac_handle_default_rxq(toe->gmac[1].dev,&toe->gmac[1]);
-- printk("\nfreeq int\n");
-- toe_gmac_fill_free_q();
-- tp->sw_fq_empty_cnt++;
--
-- gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
-- SWFQ_EMPTY_INT_BIT);
-- }
-- }
--
-- // Interrupt Status 1
-- if (status1 & tp->intr1_enabled)
-- {
-- #define G1_INTR0_BITS (GMAC1_HWTQ13_EOF_INT_BIT | GMAC1_HWTQ12_EOF_INT_BIT | GMAC1_HWTQ11_EOF_INT_BIT | GMAC1_HWTQ10_EOF_INT_BIT)
-- #define G0_INTR0_BITS (GMAC0_HWTQ03_EOF_INT_BIT | GMAC0_HWTQ02_EOF_INT_BIT | GMAC0_HWTQ01_EOF_INT_BIT | GMAC0_HWTQ00_EOF_INT_BIT)
-- // Handle GMAC 0/1 HW Tx queue 0-3 EOF events
-- // Only count
-- // TOE, Classification, and default queues interrupts are handled by ISR
-- // because they should pass packets to upper layer
-- if (tp->port_id == 0)
-- {
--#ifndef INTERRUPT_SELECT
-- if (netif_running(dev) && (status1 & G0_INTR0_BITS) && (tp->intr1_enabled & G0_INTR0_BITS))
-- {
-- if (status1 & GMAC0_HWTQ03_EOF_INT_BIT)
-- tp->hwtxq[3].eof_cnt++;
-- if (status1 & GMAC0_HWTQ02_EOF_INT_BIT)
-- tp->hwtxq[2].eof_cnt++;
-- if (status1 & GMAC0_HWTQ01_EOF_INT_BIT)
-- tp->hwtxq[1].eof_cnt++;
-- if (status1 & GMAC0_HWTQ00_EOF_INT_BIT)
-- tp->hwtxq[0].eof_cnt++;
--#endif //INTERRUPT_SELECT
--#ifndef INTERRUPT_SELECT
-- }
--#endif //INTERRUPT_SELECT
-- if (netif_running(dev) && (status1 & DEFAULT_Q0_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q0_INT_BIT))
-- {
-- tp->default_q_intr_cnt++;
-- toe_gmac_handle_default_rxq(dev, tp);
-+ rcv_mask = SPI_read(2,0,0x10); // Receive mask
-+ rcv_mask |= 0x4F;
-+ for(i=0;i<4;i++){
-+ reg_val = BIT(26)|(i<<21)|(10<<16);
-+ SPI_write(3,0,1,reg_val);
-+ msleep(10);
-+ reg_val = SPI_read(3,0,2);
-+ if(reg_val & 0x0c00){
-+ printk("Port%d:Giga mode\n",i);
-+ SPI_write(1,i,0x00,0x300701B1);
-+ SPI_write(1,i,0x00,0x10070181);
-+ switch_pre_link[i]=LINK_UP;
-+ switch_pre_speed[i]=GMAC_SPEED_1000;
- }
--#ifdef CONFIG_SL351x_RXTOE
-- if (netif_running(dev) && (status1 & TOE_IQ_ALL_BITS) &&
-- (tp->intr1_enabled & TOE_IQ_ALL_BITS)) {
-- //printk("status %x, bits %x, slct %x\n", status1, TOE_IQ_ALL_BITS, tp->intr1_selected);
-- toe_gmac_handle_toeq(dev, tp, status1);
-- //toe_gmac_handle_toeq(dev, toe, tp, status1);
-+ else{
-+ reg_val = BIT(26)|(i<<21)|(5<<16);
-+ SPI_write(3,0,1,reg_val);
-+ msleep(10);
-+ ability = (reg_val = SPI_read(3,0,2)&0x5e0) >>5;
-+ if ((ability & 0x0C)) /* 100M full duplex */
-+ {
-+ SPI_write(1,i,0x00,0x30050472);
-+ SPI_write(1,i,0x00,0x10050442);
-+ printk("Port%d:100M\n",i);
-+ switch_pre_link[i]=LINK_UP;
-+ switch_pre_speed[i]=GMAC_SPEED_100;
-+ }
-+ else if((ability & 0x03)) /* 10M full duplex */
-+ {
-+ SPI_write(1,i,0x00,0x30050473);
-+ SPI_write(1,i,0x00,0x10050443);
-+ printk("Port%d:10M\n",i);
-+ switch_pre_link[i]=LINK_UP;
-+ switch_pre_speed[i]=GMAC_SPEED_10;
-+ }
-+ else{
-+ SPI_write(1,i,0x00,BIT(16)); // disable RX
-+ SPI_write(5,0,0x0E,BIT(i)); // dicard packet
-+ while((SPI_read(5,0,0x0C)&BIT(i))==0) // wait to be empty
-+ msleep(1);
-+
-+ SPI_write(1,i,0x00,0x20000030); // PORT_RST
-+ switch_pre_link[i]=LINK_DOWN;
-+ switch_pre_speed[i]=GMAC_SPEED_10;
-+ rcv_mask &= ~BIT(i);
-+ SPI_write(2,0,0x10,rcv_mask); // Disable Receive
-+ }
- }
--#endif
- }
-- else if (tp->port_id == 1)
-- {
--#ifndef INTERRUPT_SELECT
-- if (netif_running(dev) && (status1 & G1_INTR0_BITS) && (tp->intr1_enabled & G1_INTR0_BITS))
-- {
-- if (status1 & GMAC1_HWTQ13_EOF_INT_BIT)
-- tp->hwtxq[3].eof_cnt++;
-- if (status1 & GMAC1_HWTQ12_EOF_INT_BIT)
-- tp->hwtxq[2].eof_cnt++;
-- if (status1 & GMAC1_HWTQ11_EOF_INT_BIT)
-- tp->hwtxq[1].eof_cnt++;
-- if (status1 & GMAC1_HWTQ10_EOF_INT_BIT)
-- tp->hwtxq[0].eof_cnt++;
--#endif //INTERRUPT_SELECT
--#ifndef INTERRUPT_SELECT
-- }
--#endif //INTERRUPT_SELECT
-- if (netif_running(dev) && (status1 & DEFAULT_Q1_INT_BIT) && (tp->intr1_enabled & DEFAULT_Q1_INT_BIT))
-- {
-- tp->default_q_intr_cnt++;
-- toe_gmac_handle_default_rxq(dev, tp);
-- }
--#ifdef CONFIG_SL351x_RXTOE
-- if (netif_running(dev) && (status1 & TOE_IQ_ALL_BITS) &&
-- (tp->intr1_enabled & TOE_IQ_ALL_BITS)) {
-- //printk("status %x, bits %x, slct %x\n", status1, TOE_IQ_ALL_BITS, tp->intr1_selected);
-- toe_gmac_handle_toeq(dev, tp, status1);
-- //toe_gmac_handle_toeq(dev, toe, tp, status1);
-- }
- #endif
-- }
-+ gmac_get_switch_status(dev);
-+ gmac_write_reg(tp->base_addr, GMAC_STATUS, 0x7d, 0x0000007f);
-+// SPI_write(2,0,0x10,rcv_mask); // Enable Receive
-+ return ;
- }
-+#endif
-
-+ reg_val = gmac_get_phy_vendor(tp->phy_addr);
-+ printk("GMAC-%d Addr %d Vendor ID: 0x%08x\n", tp->port_id, tp->phy_addr, reg_val);
-
-- // Interrupt Status 0
-- if (status0 & tp->intr0_enabled)
-- {
--
-- #define ERR_INTR_BITS (GMAC0_TXDERR_INT_BIT | GMAC0_TXPERR_INT_BIT | \
-- GMAC1_TXDERR_INT_BIT | GMAC1_TXPERR_INT_BIT | \
-- GMAC0_RXDERR_INT_BIT | GMAC0_RXPERR_INT_BIT | \
-- GMAC1_RXDERR_INT_BIT | GMAC1_RXPERR_INT_BIT)
--#ifndef INTERRUPT_SELECT
-- if (status0 & ERR_INTR_BITS)
-- {
-- if ((status0 & GMAC0_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXDERR_INT_BIT))
-- {
-- tp->txDerr_cnt[0]++;
-- printk("GMAC0 TX AHB Bus Error!\n");
-- }
-- if ((status0 & GMAC0_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_TXPERR_INT_BIT))
-- {
-- tp->txPerr_cnt[0]++;
-- printk("GMAC0 Tx Descriptor Protocol Error!\n");
-- }
-- if ((status0 & GMAC1_TXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXDERR_INT_BIT))
-- {
-- tp->txDerr_cnt[1]++;
-- printk("GMAC1 Tx AHB Bus Error!\n");
-- }
-- if ((status0 & GMAC1_TXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_TXPERR_INT_BIT))
-- {
-- tp->txPerr_cnt[1]++;
-- printk("GMAC1 Tx Descriptor Protocol Error!\n");
-- }
--
-- if ((status0 & GMAC0_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXDERR_INT_BIT))
-- {
-- tp->RxDerr_cnt[0]++;
-- printk("GMAC0 Rx AHB Bus Error!\n");
-- }
-- if ((status0 & GMAC0_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC0_RXPERR_INT_BIT))
-- {
-- tp->RxPerr_cnt[0]++;
-- printk("GMAC0 Rx Descriptor Protocol Error!\n");
-- }
-- if ((status0 & GMAC1_RXDERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXDERR_INT_BIT))
-- {
-- tp->RxDerr_cnt[1]++;
-- printk("GMAC1 Rx AHB Bus Error!\n");
-- }
-- if ((status0 & GMAC1_RXPERR_INT_BIT) && (tp->intr0_enabled & GMAC1_RXPERR_INT_BIT))
-- {
-- tp->RxPerr_cnt[1]++;
-- printk("GMAC1 Rx Descriptor Protocol Error!\n");
-- }
-- }
--#endif //INTERRUPT_SELECT
--#ifndef GMAX_TX_INTR_DISABLED
-- if (tp->port_id == 1 && netif_running(dev) &&
-- (((status0 & GMAC1_SWTQ10_FIN_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_FIN_INT_BIT))
-- ||
-- ((status0 & GMAC1_SWTQ10_EOF_INT_BIT) && (tp->intr0_enabled & GMAC1_SWTQ10_EOF_INT_BIT))))
-- {
-- toe_gmac_tx_complete(&toe_private_data.gmac[1], 0, dev, 1);
-- }
--
-- if (tp->port_id == 0 && netif_running(dev) &&
-- (((status0 & GMAC0_SWTQ00_FIN_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_FIN_INT_BIT))
-- ||
-- ((status0 & GMAC0_SWTQ00_EOF_INT_BIT) && (tp->intr0_enabled & GMAC0_SWTQ00_EOF_INT_BIT))))
-- {
-- toe_gmac_tx_complete(&toe_private_data.gmac[0], 0, dev, 1);
-- }
--#endif
-- // clear enabled status bits
-- }
-- // Interrupt Status 4
--#ifndef INTERRUPT_SELECT
-- if (status4 & tp->intr4_enabled)
-- {
-- #define G1_INTR4_BITS (0xff000000)
-- #define G0_INTR4_BITS (0x00ff0000)
--
-- if (tp->port_id == 0)
-- {
-- if ((status4 & G0_INTR4_BITS) && (tp->intr4_enabled & G0_INTR4_BITS))
-- {
-- if (status4 & GMAC0_RESERVED_INT_BIT)
-- printk("GMAC0_RESERVED_INT_BIT is ON\n");
-- if (status4 & GMAC0_MIB_INT_BIT)
-- tp->mib_full_cnt++;
-- if (status4 & GMAC0_RX_PAUSE_ON_INT_BIT)
-- tp->rx_pause_on_cnt++;
-- if (status4 & GMAC0_TX_PAUSE_ON_INT_BIT)
-- tp->tx_pause_on_cnt++;
-- if (status4 & GMAC0_RX_PAUSE_OFF_INT_BIT)
-- tp->rx_pause_off_cnt++;
-- if (status4 & GMAC0_TX_PAUSE_OFF_INT_BIT)
-- tp->rx_pause_off_cnt++;
-- if (status4 & GMAC0_RX_OVERRUN_INT_BIT)
-- tp->rx_overrun_cnt++;
-- if (status4 & GMAC0_STATUS_CHANGE_INT_BIT)
-- tp->status_changed_cnt++;
-- }
-- }
-- else if (tp->port_id == 1)
-- {
-- if ((status4 & G1_INTR4_BITS) && (tp->intr4_enabled & G1_INTR4_BITS))
-- {
-- if (status4 & GMAC1_RESERVED_INT_BIT)
-- printk("GMAC1_RESERVED_INT_BIT is ON\n");
-- if (status4 & GMAC1_MIB_INT_BIT)
-- tp->mib_full_cnt++;
-- if (status4 & GMAC1_RX_PAUSE_ON_INT_BIT)
-- {
-- //printk("Gmac pause on\n");
-- tp->rx_pause_on_cnt++;
-- }
-- if (status4 & GMAC1_TX_PAUSE_ON_INT_BIT)
-- {
-- //printk("Gmac pause on\n");
-- tp->tx_pause_on_cnt++;
-- }
-- if (status4 & GMAC1_RX_PAUSE_OFF_INT_BIT)
-- {
-- //printk("Gmac pause off\n");
-- tp->rx_pause_off_cnt++;
-- }
-- if (status4 & GMAC1_TX_PAUSE_OFF_INT_BIT)
-- {
-- //printk("Gmac pause off\n");
-- tp->rx_pause_off_cnt++;
-- }
-- if (status4 & GMAC1_RX_OVERRUN_INT_BIT)
-- {
-- //printk("Gmac Rx Overrun \n");
-- tp->rx_overrun_cnt++;
-- }
-- if (status4 & GMAC1_STATUS_CHANGE_INT_BIT)
-- tp->status_changed_cnt++;
-- }
-- }
--#if 0
-- if ((status4 & SWFQ_EMPTY_INT_BIT) && (tp->intr4_enabled & SWFQ_EMPTY_INT_BIT))
-- {
-- // unsigned long data = REG32(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
--// mac_stop_rxdma(tp->sc);
-- gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_ENABLE_4_REG,
-- tp->intr4_enabled & ~SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
--
-- gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG,
-- SWFQ_EMPTY_INT_BIT, SWFQ_EMPTY_INT_BIT);
-- toe_gmac_fill_free_q();
-- tp->sw_fq_empty_cnt++;
--
-- gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
-- SWFQ_EMPTY_INT_BIT);
--//#if 0
--/* if (netif_running(dev))
-- toe_gmac_handle_default_rxq(dev, tp);
-- printk("SWFQ_EMPTY_INT_BIT is ON!\n"); // should not be happened */
--//#endif
-- }
--#endif
-- }
--#endif //INTERRUPT_SELECT
-- toe_gmac_enable_interrupt(tp->irq);
--//enable gmac rx function when do RFC 2544
--#ifdef IxscriptMate_1518
-- if (storlink_ctl.pauseoff == 1)
-- {
-- GMAC_CONFIG0_T config0;
-- config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-- config0.bits.dis_rx = 0;
-- writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-- config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-- config0.bits.dis_rx = 0;
-- writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-- }
--#endif
-- //printk("gmac_interrupt complete!\n\n");
--// return IRQ_RETVAL(handled);
-- return IRQ_RETVAL(1);
--#ifdef CONFIG_SL_NAPI
--}
--#endif
--}
--
--/*----------------------------------------------------------------------
--* toe_gmac_handle_default_rxq
--* (1) Get rx Buffer for default Rx queue
--* (2) notify or call upper-routine to handle it
--* (3) get a new buffer and insert it into SW free queue
--* (4) Note: The SW free queue Read-Write Pointer should be locked when accessing
--*----------------------------------------------------------------------*/
--//static inline void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp)
--static void toe_gmac_handle_default_rxq(struct net_device *dev, GMAC_INFO_T *tp)
--{
-- TOE_INFO_T *toe;
-- GMAC_RXDESC_T *curr_desc;
-- struct sk_buff *skb;
-- DMA_RWPTR_T rwptr;
-- unsigned int pkt_size;
-- int max_cnt;
-- unsigned int desc_count;
-- unsigned int good_frame, chksum_status, rx_status;
-- struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
--
--//when do ixia RFC 2544 test and packet size is select 1518 bytes,disable gmace rx function immediately after one interrupt come in.
--#ifdef IxscriptMate_1518
-- if (storlink_ctl.pauseoff == 1)
-- {
-- GMAC_CONFIG0_T config0;
-- config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-- config0.bits.dis_rx = 1;
-- writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-- config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-- config0.bits.dis_rx = 1;
-- writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-- }
--#endif
-- rwptr.bits32 = readl(&tp->default_qhdr->word1);
--#if 0
-- if (rwptr.bits.rptr != tp->rx_rwptr.bits.rptr)
-- {
-- mac_stop_txdma((struct net_device *)tp->dev);
-- printk("Default Queue HW RD ptr (0x%x) != SW RD Ptr (0x%x)\n",
-- rwptr.bits32, tp->rx_rwptr.bits.rptr);
-- while(1);
-- }
--#endif
-- toe = (TOE_INFO_T *)&toe_private_data;
-- max_cnt = DEFAULT_RXQ_MAX_CNT;
-- while ((--max_cnt) && rwptr.bits.rptr != rwptr.bits.wptr)
--// while (rwptr.bits.rptr != rwptr.bits.wptr)
-- {
--//if packet size is not 1518 for RFC 2544,enable gmac rx function.The other packet size have RX workaround.
--#ifdef IxscriptMate_1518
-- if (storlink_ctl.pauseoff == 1)
-- {
-- if (pkt_size != 1514)
-- {
-- GMAC_CONFIG0_T config0;
-- config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-- config0.bits.dis_rx = 0;
-- writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-- config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-- config0.bits.dis_rx = 0;
-- writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-- }
-- }
--#endif
-- curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
--// consistent_sync(curr_desc, sizeof(GMAC_RXDESC_T), PCI_DMA_FROMDEVICE);
-- tp->default_q_cnt++;
-- tp->rx_curr_desc = (unsigned int)curr_desc;
-- rx_status = curr_desc->word0.bits.status;
-- chksum_status = curr_desc->word0.bits.chksum_status;
-- tp->rx_status_cnt[rx_status]++;
-- tp->rx_chksum_cnt[chksum_status]++;
-- pkt_size = curr_desc->word1.bits.byte_count; /*total byte count in a frame*/
-- desc_count = curr_desc->word0.bits.desc_count; /* get descriptor count per frame */
-- good_frame=1;
-- if ((curr_desc->word0.bits32 & (GMAC_RXDESC_0_T_derr | GMAC_RXDESC_0_T_perr))
-- || (pkt_size < 60)
-- || (chksum_status & 0x4)
-- || rx_status)
-- {
-- good_frame = 0;
-- if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_derr)
-- printk("%s::derr (GMAC-%d)!!!\n", __func__, tp->port_id);
-- if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_perr)
-- printk("%s::perr (GMAC-%d)!!!\n", __func__, tp->port_id);
-- if (rx_status)
-- {
-- if (rx_status == 4 || rx_status == 7)
-- isPtr->rx_crc_errors++;
--// printk("%s::Status=%d (GMAC-%d)!!!\n", __func__, rx_status, tp->port_id);
-- }
--#ifdef SL351x_GMAC_WORKAROUND
-- else if (pkt_size < 60)
-- {
-- if (tp->short_frames_cnt < GMAC_SHORT_FRAME_THRESHOLD)
-- tp->short_frames_cnt++;
-- if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
-- {
-- GMAC_CONFIG0_T config0;
-- config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-- config0.bits.dis_rx = 1;
-- writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-- config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-- config0.bits.dis_rx = 1;
-- writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-- }
-- }
--#endif
--// if (chksum_status)
--// printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
-- skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
-- dev_kfree_skb_irq(skb);
-- }
-- if (good_frame)
-- {
-- if (curr_desc->word0.bits.drop)
-- printk("%s::Drop (GMAC-%d)!!!\n", __func__, tp->port_id);
--// if (chksum_status)
--// printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
--
-- /* get frame information from the first descriptor of the frame */
--#ifdef SL351x_GMAC_WORKAROUND
-- if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
-- {
-- GMAC_CONFIG0_T config0;
-- config0.bits32 = readl(TOE_GMAC0_BASE+GMAC_CONFIG0);
-- config0.bits.dis_rx = 0;
-- writel(config0.bits32, TOE_GMAC0_BASE+GMAC_CONFIG0);
-- config0.bits32 = readl(TOE_GMAC1_BASE+GMAC_CONFIG0);
-- config0.bits.dis_rx = 0;
-- writel(config0.bits32, TOE_GMAC1_BASE+GMAC_CONFIG0);
-- }
-- tp->short_frames_cnt = 0;
--#endif
-- isPtr->rx_packets++;
-- skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr - SKB_RESERVE_BYTES)));
-- if (!skb)
-- {
-- printk("Fatal Error!!skb==NULL\n");
-- goto next_rx;
-- }
-- tp->curr_rx_skb = skb;
-- // consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE);
--
-- // curr_desc->word2.buf_adr = 0;
--
-- skb_reserve (skb, RX_INSERT_BYTES); /* 16 byte align the IP fields. */
-- skb_put(skb, pkt_size);
-- skb->dev = dev;
-- if (chksum_status == RX_CHKSUM_IP_UDP_TCP_OK)
-- {
-- skb->ip_summed = CHECKSUM_UNNECESSARY;
--#ifdef CONFIG_SL351x_NAT
-- if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
-- {
-- struct iphdr *ip_hdr;
-- ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
-- sl351x_nat_input(skb,
-- tp->port_id,
-- (void *)curr_desc->word3.bits.l3_offset,
-- (void *)curr_desc->word3.bits.l4_offset);
-- }
--#endif
-- skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
--#if 0
--#ifdef CONFIG_SL351x_RXTOE
-- if (storlink_ctl.rx_max_pktsize) {
-- struct iphdr *ip_hdr;
-- struct tcphdr *tcp_hdr;
-- int ip_hdrlen;
--
-- ip_hdr = (struct iphdr*)&(skb->data[0]);
-- if ((skb->protocol == __constant_htons(ETH_P_IP)) &&
-- ((ip_hdr->protocol & 0x00ff) == IPPROTO_TCP)) {
-- ip_hdrlen = ip_hdr->ihl << 2;
-- tcp_hdr = (struct tcphdr*)&(skb->data[ip_hdrlen]);
-- if (tcp_hdr->syn) {
-- struct toe_conn* connection = init_toeq(ip_hdr->version,
-- ip_hdr, tcp_hdr, toe, &(skb->data[0]) - 14);
-- TCP_SKB_CB(skb)->connection = connection;
-- // hash_dump_entry(TCP_SKB_CB(skb)->connection->hash_entry_index);
-- // printk("%s::skb data %x, conn %x, mode %x\n",
-- // __func__, skb->data, connection, connection->mode);
-- }
-- }
-- }
--#endif
--#endif
-- }
-- else if (chksum_status == RX_CHKSUM_IP_OK_ONLY)
-- {
-- skb->ip_summed = CHECKSUM_UNNECESSARY;
--#ifdef CONFIG_SL351x_NAT
-- if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
-- {
-- struct iphdr *ip_hdr;
-- //struct tcphdr *tcp_hdr;
-- ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
-- //tcp_hdr = (struct tcphdr *)&(skb->data[curr_desc->word3.bits.l4_offset]);
-- if (ip_hdr->protocol == IPPROTO_UDP)
-- {
-- sl351x_nat_input(skb,
-- tp->port_id,
-- (void *)curr_desc->word3.bits.l3_offset,
-- (void *)curr_desc->word3.bits.l4_offset);
-- }
-- else if (ip_hdr->protocol == IPPROTO_GRE)
-- {
-- sl351x_nat_input(skb,
-- tp->port_id,
-- (void *)curr_desc->word3.bits.l3_offset,
-- (void *)curr_desc->word3.bits.l4_offset);
-- }
-- }
--#endif
-- skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
-- }
-- else
-- {
-- skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
-- }
--
-- netif_rx(skb); /* socket rx */
-- dev->last_rx = jiffies;
--
-- isPtr->rx_bytes += pkt_size;
--
-- }
--
--next_rx:
-- // advance one for Rx default Q 0/1
-- rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
-- SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
-- tp->rx_rwptr.bits32 = rwptr.bits32;
--
-- }
--
-- /* Handles first available packets only then refill the queue. */
-- toe_gmac_fill_free_q();
--}
--
--/*----------------------------------------------------------------------
--* gmac_get_phy_vendor
--*----------------------------------------------------------------------*/
--static unsigned int gmac_get_phy_vendor(int phy_addr)
--{
-- unsigned int reg_val;
-- reg_val=(mii_read(phy_addr,0x02) << 16) + mii_read(phy_addr,0x03);
-- return reg_val;
--}
--
--/*----------------------------------------------------------------------
--* gmac_set_phy_status
--*----------------------------------------------------------------------*/
--void gmac_set_phy_status(struct net_device *dev)
--{
-- GMAC_INFO_T *tp = dev->priv;
-- GMAC_STATUS_T status;
-- unsigned int reg_val, ability,wan_port_id;
-- unsigned int i = 0;
--
--#ifdef VITESSE_G5SWITCH
-- if((tp->port_id == GMAC_PORT1)&&(Giga_switch==1)){
--#if 0
-- rcv_mask = SPI_read(2,0,0x10); // Receive mask
-- rcv_mask |= 0x4F;
-- for(i=0;i<4;i++){
-- reg_val = BIT(26)|(i<<21)|(10<<16);
-- SPI_write(3,0,1,reg_val);
-- msleep(10);
-- reg_val = SPI_read(3,0,2);
-- if(reg_val & 0x0c00){
-- printk("Port%d:Giga mode\n",i);
-- SPI_write(1,i,0x00,0x300701B1);
-- SPI_write(1,i,0x00,0x10070181);
-- switch_pre_link[i]=LINK_UP;
-- switch_pre_speed[i]=GMAC_SPEED_1000;
-- }
-- else{
-- reg_val = BIT(26)|(i<<21)|(5<<16);
-- SPI_write(3,0,1,reg_val);
-- msleep(10);
-- ability = (reg_val = SPI_read(3,0,2)&0x5e0) >>5;
-- if ((ability & 0x0C)) /* 100M full duplex */
-- {
-- SPI_write(1,i,0x00,0x30050472);
-- SPI_write(1,i,0x00,0x10050442);
-- printk("Port%d:100M\n",i);
-- switch_pre_link[i]=LINK_UP;
-- switch_pre_speed[i]=GMAC_SPEED_100;
-- }
-- else if((ability & 0x03)) /* 10M full duplex */
-- {
-- SPI_write(1,i,0x00,0x30050473);
-- SPI_write(1,i,0x00,0x10050443);
-- printk("Port%d:10M\n",i);
-- switch_pre_link[i]=LINK_UP;
-- switch_pre_speed[i]=GMAC_SPEED_10;
-- }
-- else{
-- SPI_write(1,i,0x00,BIT(16)); // disable RX
-- SPI_write(5,0,0x0E,BIT(i)); // dicard packet
-- while((SPI_read(5,0,0x0C)&BIT(i))==0) // wait to be empty
-- msleep(1);
--
-- SPI_write(1,i,0x00,0x20000030); // PORT_RST
-- switch_pre_link[i]=LINK_DOWN;
-- switch_pre_speed[i]=GMAC_SPEED_10;
-- rcv_mask &= ~BIT(i);
-- SPI_write(2,0,0x10,rcv_mask); // Disable Receive
-- }
-- }
-- }
--#endif
-- gmac_get_switch_status(dev);
-- gmac_write_reg(tp->base_addr, GMAC_STATUS, 0x7d, 0x0000007f);
--// SPI_write(2,0,0x10,rcv_mask); // Enable Receive
-- return ;
-- }
--#endif
--
-- reg_val = gmac_get_phy_vendor(tp->phy_addr);
-- printk("GMAC-%d Addr %d Vendor ID: 0x%08x\n", tp->port_id, tp->phy_addr, reg_val);
--
-- switch (tp->phy_mode)
-+ switch (tp->phy_mode)
- {
- case GMAC_PHY_GMII:
- mii_write(tp->phy_addr,0x04,0x05e1); /* advertisement 100M full duplex, pause capable on */
-@@ -3552,6 +2982,7 @@ void gmac_set_phy_status(struct net_devi
- status.bits.link = LINK_DOWN;
- // clear_bit(__LINK_STATE_START, &dev->state);
- printk("Link Down (0x%04x) ", reg_val);
-+#ifdef VITESSE_G5SWITCH
- if(Giga_switch == 1)
- {
- wan_port_id = 1;
-@@ -3565,6 +2996,7 @@ void gmac_set_phy_status(struct net_devi
- storlink_ctl.link[ tp->port_id] = 0;
- #endif
- }
-+#endif
- }
- else
- {
-@@ -3572,6 +3004,7 @@ void gmac_set_phy_status(struct net_devi
- status.bits.link = LINK_UP;
- // set_bit(__LINK_STATE_START, &dev->state);
- printk("Link Up (0x%04x) ",reg_val);
-+#ifdef VITESSE_G5SWITCH
- if(Giga_switch == 1)
- {
- wan_port_id = 1;
-@@ -3585,6 +3018,7 @@ void gmac_set_phy_status(struct net_devi
- storlink_ctl.link[ tp->port_id] = 1;
- #endif
- }
-+#endif
- }
- // value = mii_read(PHY_ADDR,0x05);
-
-@@ -3863,6 +3297,7 @@ void gmac_get_phy_status(struct net_devi
- }
- }
- status.bits.link = LINK_UP; /* link up */
-+#ifdef VITESSE_G5SWITCH
- if(Giga_switch==1)
- {
- wan_port_id = 1;
-@@ -3874,6 +3309,7 @@ void gmac_get_phy_status(struct net_devi
- storlink_ctl.link[ tp->port_id] = 1;
- #endif
- }
-+#endif
- if ((ability & 0x20)==0x20)
- {
- if (tp->flow_control_enable == 0)
-@@ -3914,6 +3350,7 @@ void gmac_get_phy_status(struct net_devi
- else
- {
- status.bits.link = LINK_DOWN; /* link down */
-+#ifdef VITESSE_G5SWITCH
- if(Giga_switch == 1)
- {
- wan_port_id = 1;
-@@ -3925,6 +3362,7 @@ void gmac_get_phy_status(struct net_devi
- storlink_ctl.link[ tp->port_id] = 0;
- #endif
- }
-+#endif
- if (tp->pre_phy_status == LINK_UP)
- {
- printk("GMAC-%d LINK_Down......\n",tp->port_id);
-@@ -4298,86 +3736,102 @@ static void gmac_set_rx_mode(struct net_
- }
-
- #ifdef CONFIG_SL_NAPI
-+
-+static int gmax_rx(struct net_device *dev, int *budget)
-+{
-+ return 0;
-+}
-+
-+static int gmac_tx(struct net_device *dev, int *budget)
-+{
-+ return 0;
-+}
-+
- /*----------------------------------------------------------------------
- * gmac_rx_poll
- *----------------------------------------------------------------------*/
- static int gmac_rx_poll(struct net_device *dev, int *budget)
- {
-- TOE_INFO_T *toe;
-- GMAC_RXDESC_T *curr_desc;
-- struct sk_buff *skb;
-- DMA_RWPTR_T rwptr;
-- unsigned int data32;
-- unsigned int pkt_size;
-- unsigned int desc_count;
-- unsigned int good_frame, chksum_status, rx_status;
-- int rx_pkts_num = 0;
-- int quota = min(dev->quota, *budget);
-- GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
-- unsigned int status4;
-- volatile DMA_RWPTR_T fq_rwptr;
-- // int max_cnt = TOE_SW_FREEQ_DESC_NUM;//TOE_SW_FREEQ_DESC_NUM = 64
-- //unsigned long rx_old_bytes;
-+ TOE_INFO_T *toe;
-+ GMAC_RXDESC_T *curr_desc;
-+ struct sk_buff *skb;
-+ DMA_RWPTR_T rwptr;
-+ unsigned int data32;
-+ unsigned int pkt_size;
-+ unsigned int desc_count;
-+ unsigned int good_frame, chksum_status, rx_status;
-+ int rx_pkts_num = 0;
-+ int quota = min(dev->quota, *budget);
-+ GMAC_INFO_T *tp = (GMAC_INFO_T *)dev->priv;
-+ unsigned int status1;
-+ unsigned int status4;
- struct net_device_stats *isPtr = (struct net_device_stats *)&tp->ifStatics;
-- //unsigned long long rx_time;
--
-
- BUG_ON(rx_poll_enabled == 0);
--#if 1
-- if (do_again)
-- {
-- toe_gmac_fill_free_q();
-- status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-- fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-- //printk("\n%s:: do_again toe_gmac_fill_free_q =======>status4=0x%x =====fq_rwptr =0x%8x======>JKJKJKJKJKJKJKJKJ \n", __func__,status4,fq_rwptr.bits32);
-- if (fq_rwptr.bits.wptr != fq_rwptr.bits.rptr)
-- {
-- //status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-- do_again =0;
-- //netif_rx_complete(dev);
-- gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4, 0x1);
-- fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-- rwptr.bits32 = readl(&tp->default_qhdr->word1);
-- }
-- else
-- return 1;
-- }
--#endif
-- rwptr.bits32 = readl(&tp->default_qhdr->word1);
--#if 0
-- if (rwptr.bits.rptr != tp->rx_rwptr.bits.rptr)
-- {
-- mac_stop_txdma((struct net_device *)tp->dev);
-- printk("Default Queue HW RD ptr (0x%x) != SW RD Ptr (0x%x)\n",
-- rwptr.bits32, tp->rx_rwptr.bits.rptr);
-- while(1);
-- }
--#endif
-+
- toe = (TOE_INFO_T *)&toe_private_data;
-
-- fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-- //printk("%s:---Before-------------->Default Queue HW RW ptr (0x%8x), fq_rwptr =0x%8x \n",__func__,rwptr.bits32,fq_rwptr.bits32 );
-- //printk("%s:---Before while rx_pkts_num=%d------rx_finished_idx=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rx_finished_idx,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
--// while ((--max_cnt) && (rwptr.bits.rptr != rwptr.bits.wptr) && (rx_pkts_num < quota))
-+rx_poll_retry:
-+ status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
-+ if (status1 & 1) {
-+ writel(1, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
-+ }
-
-+ rwptr.bits32 = readl(&tp->default_qhdr->word1);
- while ((rwptr.bits.rptr != rwptr.bits.wptr) && (rx_pkts_num < quota))
- {
--
-- curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
-+ curr_desc = (GMAC_RXDESC_T *)tp->default_desc_base + rwptr.bits.rptr;
- tp->default_q_cnt++;
-- tp->rx_curr_desc = (unsigned int)curr_desc;
-- rx_status = curr_desc->word0.bits.status;
-- chksum_status = curr_desc->word0.bits.chksum_status;
-- tp->rx_status_cnt[rx_status]++;
-- tp->rx_chksum_cnt[chksum_status]++;
-- pkt_size = curr_desc->word1.bits.byte_count; /*total byte count in a frame*/
-+ tp->rx_curr_desc = (unsigned int)curr_desc;
-+ rx_status = curr_desc->word0.bits.status;
-+ chksum_status = curr_desc->word0.bits.chksum_status;
-+ tp->rx_status_cnt[rx_status]++;
-+ tp->rx_chksum_cnt[chksum_status]++;
-+ pkt_size = curr_desc->word1.bits.byte_count; /*total byte count in a frame*/
- desc_count = curr_desc->word0.bits.desc_count; /* get descriptor count per frame */
- good_frame=1;
-+
-+ if (0) {
-+
-+ int free, busy;
-+ uint32_t rwptr1;
-+ uint32_t rwptr2;
-+
-+ rwptr1 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+ free = (GET_WPTR(rwptr1) - GET_RPTR(rwptr1)) & 0xFF;
-+
-+ rwptr2 = readl(&tp->default_qhdr->word1);
-+ busy = (GET_RPTR(rwptr2) - GET_WPTR(rwptr2)) & 0xFF;
-+
-+ if (GET_WPTR(rwptr1) == GET_RPTR(rwptr1)) {
-+ printk("frame status: %d\n"
-+ "SWFQ: wptr: %hu, rptr: %hu, free: %d\n"
-+ "GMAC: wptr: %hu, rptr: %hu, free: %d\n",
-+ rx_status,
-+ GET_WPTR(rwptr1), GET_RPTR(rwptr1), free,
-+ GET_WPTR(rwptr2), GET_RPTR(rwptr2), busy);
-+ }
-+ }
-+
-+ {
-+ GMAC_RXDESC_T *fq_desc;
-+ void *data;
-+ struct sk_buff *skb;
-+ unsigned short idx;
-+
-+ skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
-+ idx = (unsigned short)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES + 4));
-+
-+ BUG_ON(idx > TOE_SW_FREEQ_DESC_NUM);
-+ BUG_ON(skb == NULL);
-+ fq_desc = (GMAC_RXDESC_T*)toe->swfq_desc_base + idx;
-+ fq_desc->word2.buf_adr = 0;
-+ }
-+
- if ((curr_desc->word0.bits32 & (GMAC_RXDESC_0_T_derr | GMAC_RXDESC_0_T_perr))
-- || (pkt_size < 60)
-+ || (pkt_size < 60)
- || (chksum_status & 0x4)
- || rx_status )
--// || rx_status || (rwptr.bits.rptr > rwptr.bits.wptr ))
- {
- good_frame = 0;
- if (curr_desc->word0.bits32 & GMAC_RXDESC_0_T_derr)
-@@ -4388,7 +3842,6 @@ static int gmac_rx_poll(struct net_devic
- {
- if (rx_status == 4 || rx_status == 7)
- isPtr->rx_crc_errors++;
--// printk("%s::Status=%d (GMAC-%d)!!!\n", __func__, rx_status, tp->port_id);
- }
- #ifdef SL351x_GMAC_WORKAROUND
- else if (pkt_size < 60)
-@@ -4407,17 +3860,32 @@ static int gmac_rx_poll(struct net_devic
- }
- }
- #endif
--// if (chksum_status)
--// printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
- skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
-- dev_kfree_skb_irq(skb);
-+ dev_kfree_skb(skb);
-+
-+ if (0) {
-+ int free, busy;
-+ uint32_t rwptr1;
-+ uint32_t rwptr2;
-+
-+ rwptr1 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-+ free = (GET_WPTR(rwptr1) - GET_RPTR(rwptr1)) & 0xFF;
-+
-+ rwptr2 = readl(&tp->default_qhdr->word1);
-+ busy = (GET_RPTR(rwptr2) - GET_WPTR(rwptr2)) & 0xFF;
-+
-+ printk("frame status: %d\n"
-+ "SWFQ: wptr: %hu, rptr: %hu, free: %d\n"
-+ "GMAC: wptr: %hu, rptr: %hu, free: %d\n",
-+ rx_status,
-+ GET_WPTR(rwptr1), GET_RPTR(rwptr1), free,
-+ GET_WPTR(rwptr2), GET_RPTR(rwptr2), busy);
-+ }
- }
- if (good_frame)
- {
- if (curr_desc->word0.bits.drop)
- printk("%s::Drop (GMAC-%d)!!!\n", __func__, tp->port_id);
--// if (chksum_status)
--// printk("%s::Checksum Status=%d (GMAC-%d)!!!\n", __func__, chksum_status, tp->port_id);
-
- #ifdef SL351x_GMAC_WORKAROUND
- if (tp->short_frames_cnt >= GMAC_SHORT_FRAME_THRESHOLD)
-@@ -4432,225 +3900,118 @@ static int gmac_rx_poll(struct net_devic
- }
- tp->short_frames_cnt = 0;
- #endif
-- /* get frame information from the first descriptor of the frame */
-+ /* get frame information from the first descriptor of the frame */
- isPtr->rx_packets++;
-- //consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE);
-+ consistent_sync((void *)__va(curr_desc->word2.buf_adr), pkt_size, PCI_DMA_FROMDEVICE);
- skb = (struct sk_buff *)(REG32(__va(curr_desc->word2.buf_adr) - SKB_RESERVE_BYTES));
- tp->curr_rx_skb = skb;
-- // curr_desc->word2.buf_adr = 0;
-
-- //skb_reserve (skb, SKB_RESERVE_BYTES);
- skb_reserve (skb, RX_INSERT_BYTES); /* 2 byte align the IP fields. */
-- //if ((skb->tail+pkt_size) > skb->end )
-- //printk("%s::------------->Here skb->len=%d,pkt_size= %d,skb->head=0x%x,skb->tail= 0x%x, skb->end= 0x%x\n", __func__, skb->len, pkt_size,skb->head,skb->tail,skb->end);
- skb_put(skb, pkt_size);
-
--
- skb->dev = dev;
- if (chksum_status == RX_CHKSUM_IP_UDP_TCP_OK)
- {
- skb->ip_summed = CHECKSUM_UNNECESSARY;
--#ifdef CONFIG_SL351x_NAT
-- if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
-- {
-- struct iphdr *ip_hdr;
-- ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
-- sl351x_nat_input(skb,
-- tp->port_id,
-- (void *)curr_desc->word3.bits.l3_offset,
-- (void *)curr_desc->word3.bits.l4_offset);
-- }
--#endif
- skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
--#if 0
--#ifdef CONFIG_SL351x_RXTOE
-- if (storlink_ctl.rx_max_pktsize) {
-- struct iphdr *ip_hdr;
-- struct tcphdr *tcp_hdr;
-- int ip_hdrlen;
--
-- ip_hdr = (struct iphdr*)&(skb->data[0]);
-- if ((skb->protocol == __constant_htons(ETH_P_IP)) &&
-- ((ip_hdr->protocol & 0x00ff) == IPPROTO_TCP)) {
-- ip_hdrlen = ip_hdr->ihl << 2;
-- tcp_hdr = (struct tcphdr*)&(skb->data[ip_hdrlen]);
-- if (tcp_hdr->syn) {
-- struct toe_conn* connection = init_toeq(ip_hdr->version,
-- ip_hdr, tcp_hdr, toe, &(skb->data[0]) - 14);
-- TCP_SKB_CB(skb)->connection = connection;
-- // hash_dump_entry(TCP_SKB_CB(skb)->connection->hash_entry_index);
-- // printk("%s::skb data %x, conn %x, mode %x\n",
-- // __func__, skb->data, connection, connection->mode);
-- }
-- }
-- }
--#endif
--#endif
- }
- else if (chksum_status == RX_CHKSUM_IP_OK_ONLY)
- {
- skb->ip_summed = CHECKSUM_UNNECESSARY;
--#ifdef CONFIG_SL351x_NAT
-- if (nat_cfg.enabled && curr_desc->word3.bits.l3_offset && curr_desc->word3.bits.l4_offset)
-- {
-- struct iphdr *ip_hdr;
-- ip_hdr = (struct iphdr *)&(skb->data[curr_desc->word3.bits.l3_offset]);
-- if (ip_hdr->protocol == IPPROTO_UDP)
-- {
-- sl351x_nat_input(skb,
-- tp->port_id,
-- (void *)curr_desc->word3.bits.l3_offset,
-- (void *)curr_desc->word3.bits.l4_offset);
-- }
-- else if (ip_hdr->protocol == IPPROTO_GRE)
-- {
-- sl351x_nat_input(skb,
-- tp->port_id,
-- (void *)curr_desc->word3.bits.l3_offset,
-- (void *)curr_desc->word3.bits.l4_offset);
-- }
-- }
--#endif
- skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
- }
- else
- {
- skb->protocol = eth_type_trans(skb,dev); /* set skb protocol */
- }
-- //netif_rx(skb); /* socket rx */
-+
- netif_receive_skb(skb); //For NAPI
- dev->last_rx = jiffies;
-
- isPtr->rx_bytes += pkt_size;
-- //printk("------------------->isPtr->rx_bytes = %d\n",isPtr->rx_bytes);
--
-+ }
-
-- }
- // advance one for Rx default Q 0/1
- rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
- SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
-- tp->rx_rwptr.bits32 = rwptr.bits32;
-+ tp->rx_rwptr.bits32 = rwptr.bits32;
- rx_pkts_num++;
-- //rwptr.bits32 = readl(&tp->default_qhdr->word1);//try read default_qhdr again
-- //fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-- //printk("%s:---Loop -------->rx_pkts_num=%d------------>Default Queue HW RW ptr = (0x%8x), fq_rwptr =0x%8x \n",__func__,rx_pkts_num,rwptr.bits32,fq_rwptr.bits32 );
--#if 0
-- if ((status4 & 0x1) == 0)
-- {
-- //if (!((dev->last_rx <= (rx_time + 2)) && (isPtr->rx_bytes > (rx_old_bytes + 1000000 ))))
-- if (tp->total_q_cnt_napi < 1024)
-- {
-- tp->total_q_cnt_napi++;
-- toe_gmac_fill_free_q(); //for iperf test disable
-- }
-- //else
-- //printk("%s:---isPtr->rx_bytes =%u , rx_old_bytes =%u\n",__func__,isPtr->rx_bytes,rx_old_bytes );
-+ // rwptr.bits32 = readl(&tp->default_qhdr->word1);
-
-+ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+ if (status4 & 1) {
-+ writel(status4 & SWFQ_EMPTY_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
- }
-+
-+ toe_gmac_fill_free_q(5);
-+ }
-+
-+#if 0
-+ /* avoid races with hard_start_xmit() */
-+
-+ spin_lock(&gmac_fq_lock);
-+ toe_gmac_tx_complete(&toe_private_data.gmac[0], 0, dev, 1);
-+ spin_unlock(&gmac_fq_lock);
- #endif
-- //rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
-- //printk("%s:---Loop -------->rx_pkts_num=%d----rwptr.bits.rptr=0x%x-------->Default Queue HW RW ptr = (0x%8x), fq_rwptr =0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits32,fq_rwptr.bits32 );
-- //printk("%s:---Loop rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
-+
-+ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+ if (status4 & 1)
-+ {
-+ writel(status4 & SWFQ_EMPTY_INT_BIT, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_STATUS_4_REG);
-+ status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);
-+ toe_gmac_fill_free_q(rx_pkts_num);
- }
-- // advance one for Rx default Q 0/1
-
-- //rwptr.bits.rptr = RWPTR_ADVANCE_ONE(rwptr.bits.rptr, tp->default_desc_num);
-- //SET_RPTR(&tp->default_qhdr->word1, rwptr.bits.rptr);
-- //tp->rx_rwptr.bits32 = rwptr.bits32;
-- //rwptr.bits.rptr = rwptr.bits.rptr;
-+ rwptr.bits32 = readl(&tp->default_qhdr->word1);
-+ if (rwptr.bits.rptr != rwptr.bits.wptr &&
-+ quota > rx_pkts_num)
-+ goto rx_poll_retry;
-
- dev->quota -= rx_pkts_num;
- *budget -= rx_pkts_num;
-
-- status4 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_4_REG);//try read SWFQ empty again
-- //fq_rwptr.bits32 = readl(TOE_GLOBAL_BASE + GLOBAL_SWFQ_RWPTR_REG);
-- rwptr.bits32 = readl(&tp->default_qhdr->word1); //try read default_qhdr again
-- //printk("%s:---After rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
--// if (rwptr.bits.rptr > rwptr.bits.wptr )
--// {
-- //toe_gmac_disable_rx(dev);
-- //wait_event_interruptible_timeout(freeq_wait,
-- //(rx_pkts_num == 100), CMTP_INTEROP_TIMEOUT);
-- //printk("\n%s:: return 22222=======> rx_pkts_num =%d, rwptr.bits.rptr=%d, rwptr.bits.wptr = %d ====---------=======>JKJKJKJKJK\n",
-- //__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
--// return 1;
--// }
--
-- if (rwptr.bits.rptr == rwptr.bits.wptr)
-+ /* Receive queue is empty now */
-+ if (quota >= rx_pkts_num)
- {
-- // unsigned int data32;
-- //printk("%s:---[rwptr.bits.rptr == rwptr.bits.wptr] rx_pkts_num=%d------rwptr.bits.rptr=0x%x------->Default_Q [rwptr.bits.rptr(SW)=0x%x, rwptr.bits.wptr(HW) = 0x%x ]---->Free_Q(SW_HW) = 0x%8x \n",__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.rptr,rwptr.bits.wptr,fq_rwptr.bits32 );
--
-- /* Receive descriptor is empty now */
--#if 1
-- if (status4 & 0x1)
-- {
-- do_again =1;
-- //writel(0x40400000, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_4_REG); //disable SWFQ empty interrupt
-- //toe_gmac_disable_interrupt(tp->irq);
-- tp->sw_fq_empty_cnt++;
-- //toe_gmac_disable_rx(dev);
-- writel(0x07960202, TOE_GMAC0_BASE+GMAC_CONFIG0);
-- writel(0x07960202, TOE_GMAC1_BASE+GMAC_CONFIG0);
-- //printk("\n%s :: freeq int-----tp->sw_fq_empty_cnt =%d---------====================----------------->\n",__func__,tp->sw_fq_empty_cnt);
-- //while ((fq_rwptr.bits.wptr >= (fq_rwptr.bits.rptr+256)) || (fq_rwptr.bits.wptr <= (fq_rwptr.bits.rptr+256)))
-- //{
-- //gmac_write_reg(TOE_GLOBAL_BASE, GLOBAL_INTERRUPT_STATUS_4_REG, status4,
-- //0x1);
-- //printk("\n%s::fq_rwptr.wrptr = %x =======> ===========>here \n", __func__,fq_rwptr.bits32);
-- //if ((status4 & 0x1) == 0)
-- //break;
-- return 1;
-- //}
-+ unsigned long flags;
-
-+ netif_rx_complete(dev);
-+ rx_poll_enabled = 0;
-+#if 0
-+ status1 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_STATUS_1_REG);
-+ if (status1 & 1) {
-+ if (netif_rx_reschedule(dev, rx_pkts_num)) {
-+ rx_poll_enabled = 1;
-+ return 1;
- }
-+ }
- #endif
-- //toe_gmac_fill_free_q();
-- netif_rx_complete(dev);
--
-- rx_poll_enabled = 0;
-
-- data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-- if (tp->port_id == 0)
-- data32 |= DEFAULT_Q0_INT_BIT;
-- else
-- data32 |= DEFAULT_Q1_INT_BIT;
-- writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-+ spin_lock_irqsave(&gmac_fq_lock, flags);
-
- data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
- if (tp->port_id == 0)
-- data32 |= DEFAULT_Q0_INT_BIT;
-+ data32 |= DEFAULT_Q0_INT_BIT;
- else
-- data32 |= DEFAULT_Q1_INT_BIT;
-+ data32 |= DEFAULT_Q1_INT_BIT;
- writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_4_REG);
-
-- data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+ data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
- if (tp->port_id == 0)
-- data32 |= DEFAULT_Q0_INT_BIT;
-+ data32 |= DEFAULT_Q0_INT_BIT;
- else
-- data32 |= DEFAULT_Q1_INT_BIT;
-- writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_SELECT_4_REG);
-+ data32 |= DEFAULT_Q1_INT_BIT;
-+ writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-
-- // enable GMAC-0 rx interrupt
-- // class-Q & TOE-Q are implemented in future
-- //data32 = readl(TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-- //if (tp->port_id == 0)
-- //data32 |= DEFAULT_Q0_INT_BIT;
-- //else
-- //data32 |= DEFAULT_Q1_INT_BIT;
-- //writel(data32, TOE_GLOBAL_BASE + GLOBAL_INTERRUPT_ENABLE_1_REG);
-- writel(0x3, TOE_GLOBAL_BASE+GLOBAL_INTERRUPT_ENABLE_1_REG);
-- //printk("\n%s::netif_rx_complete--> rx_pkts_num =%d, rwptr.bits.rptr=0x%x, rwptr.bits.wptr = 0x%x ====---------=======>JKJKJKJKJK\n",
-- //__func__,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
-- writel(0x07960200, TOE_GMAC0_BASE+GMAC_CONFIG0);
-- writel(0x07960200, TOE_GMAC1_BASE+GMAC_CONFIG0);
-- return 0;
-- }
-- else
-- {
-- //printk("\n%s:: return 1 -->status4= 0x%x,rx_pkts_num =%d, rwptr.bits.rptr=0x%x, rwptr.bits.wptr = 0x%x ======> \n", __func__,status4,rx_pkts_num,rwptr.bits.rptr,rwptr.bits.wptr);
-- return 1;
-- }
-+ spin_unlock_irqrestore(&gmac_fq_lock, flags);
-+
-+ return 0;
-+ }
-+ else
-+ {
-+ /* not done, will call ->poll() later. */
-+ return 1;
-+ }
- }
- #endif
-
-@@ -5114,6 +4475,7 @@ void sl351x_poll_gmac_hanged_status(u32
- {
- sl351x_nat_workaround_cnt++;
- sl351x_nat_workaround_handler();
-+ printk("%():%d - workaround\n", __func__, __LINE__);
- }
- #endif
- #endif
-@@ -5124,6 +4486,7 @@ void sl351x_poll_gmac_hanged_status(u32
- }
-
- do_workaround:
-+ printk("doing workaround ?!\n");
-
- gmac_initialized = 0;
- if (hanged_state)
-@@ -5290,6 +4653,7 @@ static void sl351x_gmac_release_swtx_q(v
- GMAC_SWTXQ_T *swtxq;
- DMA_RWPTR_T rwptr;
-
-+ printk("**** %s():%d\n", __func__, __LINE__);
- toe = (TOE_INFO_T *)&toe_private_data;
- tp = (GMAC_INFO_T *)&toe->gmac[0];
- for (i=0; i<GMAC_NUM; i++, tp++)
-@@ -5341,6 +4705,7 @@ static void sl351x_gmac_release_rx_q(voi
- volatile GMAC_RXDESC_T *curr_desc;
- struct sk_buff *skb;
-
-+ printk("**** %s():%d\n", __func__, __LINE__);
- toe = (TOE_INFO_T *)&toe_private_data;
- tp = (GMAC_INFO_T *)&toe->gmac[0];
- for (i=0; i<GMAC_NUM; i++, tp++)
-@@ -5374,6 +4739,7 @@ static void sl351x_gmac_release_class_q(
- volatile GMAC_RXDESC_T *curr_desc;
- struct sk_buff *skb;
-
-+ printk("**** %s():%d\n", __func__, __LINE__);
- toe = (TOE_INFO_T *)&toe_private_data;
- classq = (CLASSQ_INFO_T *)&toe->classq[0];
- for (i=0; i<TOE_CLASS_QUEUE_NUM; i++, classq++)
-@@ -5410,6 +4776,7 @@ static void sl351x_gmac_release_toe_q(vo
- GMAC_RXDESC_T *toe_curr_desc;
- struct sk_buff *skb;
-
-+ printk("**** %s():%d\n", __func__, __LINE__);
- toe = (TOE_INFO_T *)&toe_private_data;
- toe_qhdr = (TOE_QHDR_T *)TOE_TOE_QUE_HDR_BASE;
- for (i=0; i<TOE_TOE_QUEUE_NUM; i++, toe_qhdr++)
---- a/include/asm-arm/arch-sl2312/sl351x_gmac.h
-+++ b/include/asm-arm/arch-sl2312/sl351x_gmac.h
-@@ -107,7 +107,7 @@
- * The base address and descriptor number are configured at
- * DMA Queues Descriptor Ring Base Address/Size Register (offset 0x0004)
- **********************************************************************/
--#define TOE_SW_FREEQ_DESC_POWER 10
-+#define TOE_SW_FREEQ_DESC_POWER 8
- #define TOE_SW_FREEQ_DESC_NUM (1<<TOE_SW_FREEQ_DESC_POWER)
- #define TOE_HW_FREEQ_DESC_POWER 8
- #define TOE_HW_FREEQ_DESC_NUM (1<<TOE_HW_FREEQ_DESC_POWER)
-@@ -123,12 +123,12 @@
- #define TOE_DEFAULT_Q0_DESC_NUM (1<<TOE_DEFAULT_Q0_DESC_POWER)
- #define TOE_DEFAULT_Q1_DESC_POWER 8
- #define TOE_DEFAULT_Q1_DESC_NUM (1<<TOE_DEFAULT_Q1_DESC_POWER)
--#define TOE_TOE_DESC_POWER 8
--#define TOE_TOE_DESC_NUM (1<<TOE_TOE_DESC_POWER)
-+#define TOE_TOE_DESC_POWER 8
-+#define TOE_TOE_DESC_NUM (1<<TOE_TOE_DESC_POWER)
- #define TOE_CLASS_DESC_POWER 8
--#define TOE_CLASS_DESC_NUM (1<<TOE_CLASS_DESC_POWER)
--#define TOE_INTR_DESC_POWER 8
--#define TOE_INTR_DESC_NUM (1<<TOE_INTR_DESC_POWER)
-+#define TOE_CLASS_DESC_NUM (1<<TOE_CLASS_DESC_POWER)
-+#define TOE_INTR_DESC_POWER 8
-+#define TOE_INTR_DESC_NUM (1<<TOE_INTR_DESC_POWER)
-
- #define TOE_TOE_QUEUE_MAX 64
- #define TOE_TOE_QUEUE_NUM 64
diff --git a/target/linux/storm/patches/007-mtd.patch b/target/linux/storm/patches/007-mtd.patch
deleted file mode 100644
index a907de32cb..0000000000
--- a/target/linux/storm/patches/007-mtd.patch
+++ /dev/null
@@ -1,4948 +0,0 @@
---- a/drivers/mtd/chips/Kconfig
-+++ b/drivers/mtd/chips/Kconfig
-@@ -220,6 +220,13 @@ config MTD_ROM
- This option enables basic support for ROM chips accessed through
- a bus mapping driver.
-
-+config MTD_SERIAL
-+ tristate "Support for Serial chips in bus mapping"
-+ depends on MTD
-+ help
-+ This option enables basic support for Serial chips accessed through
-+ a bus mapping driver.
-+
- config MTD_ABSENT
- tristate "Support for absent chips in bus mapping"
- help
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -39,10 +39,15 @@
- #include <linux/mtd/cfi.h>
- #include <linux/mtd/xip.h>
-
-+//****** Storlink SoC ******
- #define AMD_BOOTLOC_BUG
--#define FORCE_WORD_WRITE 0
--
--#define MAX_WORD_RETRIES 3
-+//#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
-+#define FORCE_FAST_PROG 0
-+
-+//#define MAX_WORD_RETRIES 3
-+#define MAX_WORD_RETRIES 3 // CONFIG_MTD_CFI_AMDSTD_RETRY
-+//**************************
-
- #define MANUFACTURER_AMD 0x0001
- #define MANUFACTURER_ATMEL 0x001F
-@@ -322,6 +327,13 @@ struct mtd_info *cfi_cmdset_0002(struct
- #endif
-
- bootloc = extp->TopBottom;
-+//****** Storlink SoC ******
-+ if(bootloc == 5)
-+ {
-+ bootloc = 3;
-+ extp->TopBottom = 3;
-+ }
-+//**************************
- if ((bootloc != 2) && (bootloc != 3)) {
- printk(KERN_WARNING "%s: CFI does not contain boot "
- "bank location. Assuming top.\n", map->name);
-@@ -340,6 +352,9 @@ struct mtd_info *cfi_cmdset_0002(struct
- cfi->cfiq->EraseRegionInfo[j] = swap;
- }
- }
-+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_1
-+ cfi->device_type = CFI_DEVICETYPE_X8;
-+#endif
- /* Set the default CFI lock/unlock addresses */
- cfi->addr_unlock1 = 0x555;
- cfi->addr_unlock2 = 0x2aa;
-@@ -461,6 +476,7 @@ static int __xipram chip_ready(struct ma
- map_word d, t;
-
- d = map_read(map, addr);
-+ udelay(20); //Storlink SoC
- t = map_read(map, addr);
-
- return map_word_equal(map, d, t);
-@@ -626,7 +642,9 @@ static void put_chip(struct map_info *ma
- default:
- printk(KERN_ERR "MTD: put_chip() called with oldstate %d!!\n", chip->oldstate);
- }
-+//****** Storlink SoC ******
- wake_up(&chip->wq);
-+//**************************
- }
-
- #ifdef CONFIG_MTD_XIP
-@@ -940,7 +958,9 @@ static inline int do_read_secsi_onechip(
- cfi_send_gen_cmd(0x90, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
- cfi_send_gen_cmd(0x00, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
-
-+//****** Storlink SoC ******
- wake_up(&chip->wq);
-+//**************************
- spin_unlock(chip->mutex);
-
- return 0;
-@@ -1005,7 +1025,10 @@ static int __xipram do_write_oneword(str
- */
- unsigned long uWriteTimeout = ( HZ / 1000 ) + 1;
- int ret = 0;
-- map_word oldd;
-+//****** Storlink SoC ******
-+// map_word oldd;
-+ map_word oldd, tmp;
-+//**************************
- int retry_cnt = 0;
-
- adr += chip->start;
-@@ -1037,9 +1060,15 @@ static int __xipram do_write_oneword(str
- ENABLE_VPP(map);
- xip_disable(map, chip, adr);
- retry:
-+//****** Storlink SoC ******
-+#if FORCE_FAST_PROG /* Unlock bypass */
-+ cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
-+#else
- cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
- cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
- cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
-+#endif
-+//**************************
- map_write(map, datum, adr);
- chip->state = FL_WRITING;
-
-@@ -1072,7 +1101,13 @@ static int __xipram do_write_oneword(str
- }
-
- if (chip_ready(map, adr))
-- break;
-+ {
-+ tmp = map_read(map, adr);
-+ if(map_word_equal(map, tmp, datum))
-+// goto op_done;
-+ break;
-+
-+ }
-
- /* Latency issues. Drop the lock, wait a while and retry */
- UDELAY(map, chip, adr, 1);
-@@ -1084,8 +1119,17 @@ static int __xipram do_write_oneword(str
- /* FIXME - should have reset delay before continuing */
-
- if (++retry_cnt <= MAX_WORD_RETRIES)
-+ {
-+//****** Storlink SoC ******
-+#if FORCE_FAST_PROG
-+ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
-+ //udelay(1);
-+#endif
-+ udelay(1);
- goto retry;
--
-+ }
- ret = -EIO;
- }
- xip_enable(map, chip, adr);
-@@ -1171,7 +1215,14 @@ static int cfi_amdstd_write_words(struct
- return 0;
- }
- }
--
-+//****** Storlink SoC ******
-+ map_write( map, CMD(0xF0), chipstart );
-+#if FORCE_FAST_PROG
-+ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chipstart, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
-+//**************************
- /* We are now aligned, write as much as possible */
- while(len >= map_bankwidth(map)) {
- map_word datum;
-@@ -1181,7 +1232,15 @@ static int cfi_amdstd_write_words(struct
- ret = do_write_oneword(map, &cfi->chips[chipnum],
- ofs, datum);
- if (ret)
-+ {
-+//****** Storlink SoC ******
-+#if FORCE_FAST_PROG
-+ /* Get out of unlock bypass mode */
-+ cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
- return ret;
-+ }
-
- ofs += map_bankwidth(map);
- buf += map_bankwidth(map);
-@@ -1189,19 +1248,38 @@ static int cfi_amdstd_write_words(struct
- len -= map_bankwidth(map);
-
- if (ofs >> cfi->chipshift) {
-+//****** Storlink SoC ******
-+#if FORCE_FAST_PROG
-+ /* Get out of unlock bypass mode */
-+ cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
- chipnum ++;
- ofs = 0;
- if (chipnum == cfi->numchips)
- return 0;
- chipstart = cfi->chips[chipnum].start;
-+#if FORCE_FAST_PROG
-+ /* Go into unlock bypass mode for next set of chips */
-+ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chipstart, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
- }
- }
-
-+#if FORCE_FAST_PROG
-+ /* Get out of unlock bypass mode */
-+ cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
-+
- /* Write the trailing bytes if any */
- if (len & (map_bankwidth(map)-1)) {
- map_word tmp_buf;
-
- retry1:
-+
- spin_lock(cfi->chips[chipnum].mutex);
-
- if (cfi->chips[chipnum].state != FL_READY) {
-@@ -1221,7 +1299,11 @@ static int cfi_amdstd_write_words(struct
- #endif
- goto retry1;
- }
--
-+#if FORCE_FAST_PROG
-+ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chipstart, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
- tmp_buf = map_read(map, ofs + chipstart);
-
- spin_unlock(cfi->chips[chipnum].mutex);
-@@ -1231,11 +1313,23 @@ static int cfi_amdstd_write_words(struct
- ret = do_write_oneword(map, &cfi->chips[chipnum],
- ofs, tmp_buf);
- if (ret)
-+ {
-+#if FORCE_FAST_PROG
-+ /* Get out of unlock bypass mode */
-+ cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
- return ret;
--
-+ }
-+#if FORCE_FAST_PROG
-+ /* Get out of unlock bypass mode */
-+ cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
- (*retlen) += len;
- }
-
-+ map_write( map, CMD(0xF0), chipstart );
- return 0;
- }
-
-@@ -1275,6 +1369,7 @@ static int __xipram do_write_buffer(stru
- ENABLE_VPP(map);
- xip_disable(map, chip, cmd_adr);
-
-+ map_write( map, CMD(0xF0), chip->start ); //Storlink
- cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
- cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
- //cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
-@@ -1535,6 +1630,9 @@ static int __xipram do_erase_oneblock(st
- DECLARE_WAITQUEUE(wait, current);
- int ret = 0;
-
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_lock(); // sl2312 share pin lock
-+#endif
- adr += chip->start;
-
- spin_lock(chip->mutex);
-@@ -1613,6 +1711,9 @@ static int __xipram do_erase_oneblock(st
- chip->state = FL_READY;
- put_chip(map, chip, adr);
- spin_unlock(chip->mutex);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return ret;
- }
-
---- /dev/null
-+++ b/drivers/mtd/chips/map_serial.c
-@@ -0,0 +1,188 @@
-+/*
-+ * Common code to handle map devices which are simple ROM
-+ * (C) 2000 Red Hat. GPL'd.
-+ * $Id: map_serial.c,v 1.3 2006/06/05 02:34:54 middle Exp $
-+ */
-+
-+#include <linux/version.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <asm/io.h>
-+
-+#include <asm/byteorder.h>
-+#include <linux/errno.h>
-+#include <linux/slab.h>
-+
-+#include <asm/hardware.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/init.h> //add
-+#include <asm/arch/sl2312.h>
-+#include <asm/arch/flash.h>
-+
-+static int mapserial_erase(struct mtd_info *mtd, struct erase_info *instr);
-+static int mapserial_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
-+static int mapserial_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+static void mapserial_nop (struct mtd_info *);
-+struct mtd_info *map_serial_probe(struct map_info *map);
-+
-+extern int m25p80_sector_erase(__u32 address, __u32 schip_en);
-+
-+static struct mtd_chip_driver mapserial_chipdrv = {
-+ probe: map_serial_probe,
-+ name: "map_serial",
-+ module: THIS_MODULE
-+};
-+
-+struct mtd_info *map_serial_probe(struct map_info *map)
-+{
-+ struct mtd_info *mtd;
-+
-+ mtd = kmalloc(sizeof(*mtd), GFP_KERNEL);
-+ if (!mtd)
-+ return NULL;
-+
-+ memset(mtd, 0, sizeof(*mtd));
-+
-+ map->fldrv = &mapserial_chipdrv;
-+ mtd->priv = map;
-+ mtd->name = map->name;
-+ mtd->type = MTD_OTHER;
-+ mtd->erase = mapserial_erase;
-+ mtd->size = map->size;
-+ mtd->read = mapserial_read;
-+ mtd->write = mapserial_write;
-+ mtd->sync = mapserial_nop;
-+ mtd->flags = (MTD_WRITEABLE|MTD_ERASEABLE);
-+// mtd->erasesize = 512; // page size;
-+#ifdef CONFIG_MTD_SL2312_SERIAL_ST
-+ mtd->erasesize = M25P80_SECTOR_SIZE; // block size;
-+#else
-+ mtd->erasesize = 0x1000; // block size;
-+#endif
-+
-+ __module_get(THIS_MODULE);
-+ //MOD_INC_USE_COUNT;
-+ return mtd;
-+}
-+
-+#define FLASH_ACCESS_OFFSET 0x00000010
-+#define FLASH_ADDRESS_OFFSET 0x00000014
-+#define FLASH_WRITE_DATA_OFFSET 0x00000018
-+#define FLASH_READ_DATA_OFFSET 0x00000018
-+
-+static __u32 readflash_ctrl_reg(__u32 ofs)
-+{
-+ __u32 *base;
-+
-+ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
-+ return __raw_readl(base);
-+}
-+
-+static void writeflash_ctrl_reg(__u32 data, __u32 ofs)
-+{
-+ __u32 *base;
-+
-+ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
-+ __raw_writel(data, base);
-+}
-+
-+static int mapserial_erase_block(struct map_info *map,unsigned int block)
-+{
-+
-+ __u32 address;
-+#ifdef CONFIG_MTD_SL2312_SERIAL_ST
-+
-+ if(!m25p80_sector_erase(block, 0))
-+ return (MTD_ERASE_DONE);
-+#else
-+ __u32 opcode;
-+ __u32 count=0;
-+// __u8 status;
-+
-+ // printk("mapserial_erase_block : erase block %d \n",block);
-+// opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd;
-+ opcode = 0x80000000 | 0x0200 | 0x50;
-+ address = (block << 13);
-+ writeflash_ctrl_reg(address,FLASH_ADDRESS_OFFSET);
-+ writeflash_ctrl_reg(opcode,FLASH_ACCESS_OFFSET);
-+ opcode=readflash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(opcode&0x80000000)
-+ {
-+ opcode = readflash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ count++;
-+ if (count > 10000)
-+ {
-+ return (MTD_ERASE_FAILED);
-+ }
-+ }
-+ return (MTD_ERASE_DONE);
-+#endif
-+}
-+
-+static int mapserial_erase(struct mtd_info *mtd, struct erase_info *instr)
-+{
-+ struct map_info *map = (struct map_info *)mtd->priv;
-+ unsigned int addr;
-+ int len;
-+ unsigned int block;
-+ unsigned int ret=0;
-+
-+ addr = instr->addr;
-+ len = instr->len;
-+ while (len > 0)
-+ {
-+ block = addr / mtd->erasesize;
-+#ifdef CONFIG_MTD_SL2312_SERIAL_ST
-+ ret = mapserial_erase_block(map,addr);
-+#else
-+ ret = mapserial_erase_block(map,block);
-+#endif
-+ addr = addr + mtd->erasesize;
-+ len = len - mtd->erasesize;
-+ }
-+ return (ret);
-+}
-+
-+static int mapserial_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
-+{
-+ struct map_info *map = (struct map_info *)mtd->priv;
-+// printk("mapserial_read : \n");
-+ map->copy_from(map, buf, from, len);
-+ *retlen = len;
-+ return 0;
-+}
-+
-+static void mapserial_nop(struct mtd_info *mtd)
-+{
-+ /* Nothing to see here */
-+}
-+
-+static int mapserial_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
-+{
-+ struct map_info *map = (struct map_info *)mtd->priv;
-+// printk("mapserial_write : buf %x to %x len %x \n",(int)buf, (int)to, (int)len);
-+ //map->copy_to(map, buf, to, len);
-+ map->copy_to(map, to, buf, len);
-+ *retlen = len;
-+ return 0;
-+}
-+
-+int __init map_serial_init(void)
-+{
-+ register_mtd_chip_driver(&mapserial_chipdrv);
-+ return 0;
-+}
-+
-+static void __exit map_serial_exit(void)
-+{
-+ unregister_mtd_chip_driver(&mapserial_chipdrv);
-+}
-+
-+module_init(map_serial_init);
-+module_exit(map_serial_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
-+MODULE_DESCRIPTION("MTD chip driver for ROM chips");
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -614,5 +614,30 @@ config MTD_PLATRAM
-
- This selection automatically selects the map_ram driver.
-
-+#***************************************************************************************
-+# Storlink parallel/Serial Flash configuration
-+#***************************************************************************************
-+config MTD_SL2312_CFI
-+ tristate "CFI Flash device mapped on SL2312"
-+ depends on MTD_CFI
-+ help
-+ Map driver for SL2312 demo board.
-+
-+config MTD_SL2312_SERIAL_ATMEL
-+ tristate "ATMEL Serial Flash device mapped on SL2312"
-+ depends on MTD_PARTITIONS && ARCH_SL2312
-+ help
-+ Map driver for SL2312 demo board.
-+
-+config MTD_SL2312_SERIAL_ST
-+ tristate "ST Serial Flash device mapped on SL2312"
-+ depends on MTD_PARTITIONS && ARCH_SL2312
-+ help
-+ Map driver for SL2312 demo board.
-+
-+config SL2312_SHARE_PIN
-+ tristate "Parallel Flash share pin on SL2312 ASIC"
-+ depends on SL3516_ASIC
-+
- endmenu
-
---- /dev/null
-+++ b/drivers/mtd/maps/sl2312-flash-atmel.c
-@@ -0,0 +1,554 @@
-+/*
-+ * $Id: sl2312-flash-atmel.c,v 1.2 2006/06/05 02:35:57 middle Exp $
-+ *
-+ * Flash and EPROM on Hitachi Solution Engine and similar boards.
-+ *
-+ * (C) 2001 Red Hat, Inc.
-+ *
-+ * GPL'd
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+
-+#include <asm/io.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/partitions.h>
-+#include <asm/hardware.h>
-+
-+#include <asm/arch/sl2312.h>
-+#include <asm/arch/flash.h>
-+#include <linux/init.h> //add
-+
-+
-+#define g_page_addr AT45DB321_PAGE_SHIFT //321 : shift 10 ; 642 : shift 11
-+#define g_chipen SERIAL_FLASH_CHIP0_EN //atmel
-+
-+extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts);
-+
-+void address_to_page(__u32 address, __u16 *page, __u16 *offset)
-+{
-+ *page = address / SPAGE_SIZE;
-+ *offset = address % SPAGE_SIZE;
-+}
-+
-+static __u32 read_flash_ctrl_reg(__u32 ofs)
-+{
-+ __u32 *base;
-+
-+ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
-+ return __raw_readl(base);
-+}
-+
-+static void write_flash_ctrl_reg(__u32 ofs,__u32 data)
-+{
-+ __u32 *base;
-+
-+ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
-+ __raw_writel(data, base);
-+}
-+
-+void atmel_read_status(__u8 cmd, __u8 *data)
-+{
-+ __u32 opcode;
-+ __u32 value;
-+
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | cmd | g_chipen;
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(opcode&0x80000000)
-+ {
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+
-+ value=read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ *data = value & 0xff;
-+}
-+
-+void main_memory_page_read(__u8 cmd, __u16 page, __u16 offset, __u8 *data)
-+{
-+ __u32 opcode;
-+ __u32 address;
-+ __u32 value;
-+
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_4X_DATA | cmd | g_chipen;
-+ address = (page << g_page_addr) + offset;
-+ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(opcode&0x80000000)
-+ {
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+
-+ value=read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ *data = value & 0xff;
-+}
-+
-+void buffer_to_main_memory(__u8 cmd, __u16 page)
-+{
-+ __u32 opcode;
-+ __u32 address;
-+ __u8 status;
-+
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd | g_chipen;
-+ address = (page << g_page_addr);
-+ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(opcode&0x80000000)
-+ {
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ atmel_read_status(READ_STATUS_SPI, &status);
-+ while(!(status&0x80))
-+ {
-+ atmel_read_status(READ_STATUS_SPI, &status);
-+ flash_delay();
-+ schedule();
-+ }
-+
-+}
-+
-+
-+void atmel_flash_read_page(__u32 address, __u8 *buffer, __u32 len)
-+{
-+ __u8 byte;
-+ __u16 page, offset;
-+ __u16 i;
-+
-+ address_to_page(address, &page, &offset);
-+
-+ for(i=0; i<len; i++,offset++)
-+ {
-+ main_memory_page_read(MAIN_MEMORY_PAGE_READ_SPI , page, offset, &byte);
-+ buffer [i]= byte;
-+ }
-+}
-+
-+void atmel_flash_program_page(__u32 address, __u8 *buffer, __u32 len)
-+{
-+ __u8 pattern;
-+ __u16 page, offset;
-+ __u32 i;
-+
-+ address_to_page(address, &page, &offset);
-+ // printk("atmel_flash_program_page: offset %x len %x page %x \n", offset, len, page);
-+
-+ if(offset)
-+ main_memory_to_buffer(MAIN_MEMORY_TO_BUFFER1,page);
-+
-+ for(i=0; i<len; i++,offset++)
-+ {
-+ pattern = buffer[i];
-+ atmel_buffer_write(BUFFER1_WRITE,offset,pattern);
-+ }
-+
-+ // printk("atmel_flash_program_page: offset %x \n", offset);
-+ buffer_to_main_memory(BUFFER1_TO_MAIN_MEMORY, page);
-+ // printk("atmel_flash_program_page: buffer_to_main_memory %x page\n", page);
-+
-+}
-+
-+
-+void main_memory_to_buffer(__u8 cmd, __u16 page)
-+{
-+ __u32 opcode;
-+ __u32 address;
-+ __u8 status;
-+
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd | g_chipen;
-+ address = (page << g_page_addr);
-+ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(opcode&0x80000000)
-+ {
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ atmel_read_status(READ_STATUS_SPI, &status);
-+ while(!(status&0x80))
-+ {
-+ atmel_read_status(READ_STATUS_SPI, &status);
-+ flash_delay();
-+ schedule();
-+ }
-+
-+}
-+
-+void main_memory_page_program(__u8 cmd, __u16 page, __u16 offset, __u8 data)
-+{
-+ __u32 opcode;
-+ __u32 address;
-+ __u8 status;
-+
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | cmd | g_chipen;
-+ address = (page << g_page_addr) + offset;
-+ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+ write_flash_ctrl_reg(FLASH_WRITE_DATA_OFFSET, data);
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(opcode&0x80000000)
-+ {
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ atmel_read_status(READ_STATUS_SPI, &status);
-+ while(!(status&0x80))
-+ {
-+ atmel_read_status(READ_STATUS_SPI, &status);
-+ flash_delay();
-+ schedule();
-+ }
-+}
-+
-+void atmel_buffer_write(__u8 cmd, __u16 offset, __u8 data)
-+{
-+ __u32 opcode;
-+ __u32 address;
-+
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | cmd | g_chipen;
-+ address = offset;
-+ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+ write_flash_ctrl_reg(FLASH_WRITE_DATA_OFFSET, data);
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(opcode&0x80000000)
-+ {
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+
-+}
-+
-+void atmel_erase_page(__u8 cmd, __u16 page)
-+{
-+ __u32 opcode;
-+ __u32 address;
-+ __u8 status;
-+
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd | g_chipen;
-+ address = (page << g_page_addr);
-+ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(opcode&0x80000000)
-+ {
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ atmel_read_status(READ_STATUS_SPI, &status);
-+ while(!(status&0x80))
-+ {
-+ atmel_read_status(READ_STATUS_SPI, &status);
-+ flash_delay();
-+ schedule();
-+ }
-+
-+}
-+
-+void atmel_erase_block(__u8 cmd, __u16 block)
-+{
-+ __u32 opcode;
-+ __u32 address;
-+ __u8 status;
-+
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd | g_chipen;
-+ address = (block << 13);
-+ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(opcode&0x80000000)
-+ {
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ atmel_read_status(READ_STATUS_SPI, &status);
-+ while(!(status&0x80))
-+ {
-+ atmel_read_status(READ_STATUS_SPI, &status);
-+ flash_delay();
-+ schedule();
-+ }
-+
-+}
-+
-+void flash_delay(void)
-+{
-+ int i;
-+
-+ for(i=0; i<50; i++)
-+ i=i;
-+}
-+
-+
-+
-+
-+__u32 sl2312_read32(struct map_info *map, unsigned long ofs)
-+{
-+
-+#if 0
-+ __u16 page, offset;
-+ __u32 pattern;
-+ __u8 byte, i;
-+
-+ pattern = 0;
-+ address_to_page(ofs, &page, &offset);
-+ for(i=0; i<4; i++, offset++)
-+ {
-+ pattern = pattern << 8;
-+ main_memory_page_read(MAIN_MEMORY_PAGE_READ_SPI , page, offset, &byte);
-+//printk("sl2312_read32:: address = %08x data = %c \n",ofs,byte);
-+ pattern += byte;
-+ }
-+ return pattern;
-+#else
-+ return read_flash_ctrl_reg(ofs);
-+#endif
-+
-+}
-+
-+__u8 sl2312_read8(struct map_info *map, unsigned long ofs)
-+{
-+ __u16 page, offset;
-+ __u8 byte;
-+
-+ address_to_page(ofs, &page, &offset);
-+ main_memory_page_read(MAIN_MEMORY_PAGE_READ_SPI , page, offset, &byte);
-+ //printk("sl2312_read8:: address = %08x data = %c \n",ofs,byte);
-+ return byte;
-+
-+}
-+
-+void sl2312_write32(struct map_info *map, __u32 d, unsigned long ofs)
-+{
-+#if 0
-+ __u16 page, offset;
-+ __u8 byte, i;
-+
-+ address_to_page(ofs, &page, &offset);
-+ for(i=0; i<4; i++, offset++)
-+ {
-+ byte = d & 0xff;
-+ main_memory_page_program(MAIN_MEMORY_PROGRAM_BUFFER1, page, offset, byte);
-+ d = d >> 8;
-+//printk("sl2312_write32:: address = %08x data = %c \n",ofs,byte);
-+ }
-+#else
-+ write_flash_ctrl_reg(ofs, d);
-+#endif
-+}
-+
-+void sl2312_write8(struct map_info *map, __u8 d, unsigned long ofs)
-+{
-+ __u16 page, offset;
-+
-+ address_to_page(ofs, &page, &offset);
-+ main_memory_page_program(MAIN_MEMORY_PROGRAM_BUFFER1, page, offset, d);
-+//printk("sl2312_write8:: address = %08x data = %c \n",ofs,d);
-+
-+}
-+
-+void sl2312_copy_from(struct map_info *map, void *buf, unsigned long ofs, ssize_t len)
-+{
-+ __u32 size;
-+ __u8 *buffer;
-+ __u32 length;//i, j,
-+
-+ //printk("sl2312_copy_from:: address = %08x datalen = %d \n",ofs,len);
-+
-+ length = len;
-+ buffer = (__u8 *)buf;
-+ while(len)
-+ {
-+ size = SPAGE_SIZE - (ofs%SPAGE_SIZE);
-+ if(size > len)
-+ size = len;
-+ atmel_flash_read_page(ofs, buffer, size);
-+ buffer+=size;
-+ ofs+=size;
-+ len -= size;
-+ }
-+
-+#if 0
-+ buffer = (__u8 *)buf;
-+ for(i=0; i<length; i+=16)
-+ {
-+ for(j=0; j<16; j++,buffer++)
-+ {
-+ if((i*16+j)<length)
-+ printk("%x ",(int)*buffer);
-+ }
-+ printk("\n");
-+ }
-+
-+ printk("\n");
-+#endif
-+
-+}
-+
-+
-+void sl2312_copy_to(struct map_info *map, unsigned long ofs, void *buf, ssize_t len)
-+{
-+ __u32 size;
-+ __u8 *buffer;
-+
-+ buffer = (__u8 *)buf;
-+ //printk("sl2312_copy_to:offset %x len %x \n", ofs, len);
-+// printk("sl2312_copy_to:buf is %x \n", (int)buf);
-+
-+ while(len)
-+ {
-+ size = SPAGE_SIZE - (ofs%SPAGE_SIZE);
-+ if(size > len)
-+ size = len;
-+ atmel_flash_program_page(ofs, buffer, size);
-+ buffer+=size;
-+ ofs+=size;
-+ len-=size;
-+ }
-+
-+
-+}
-+
-+
-+static struct mtd_info *serial_mtd;
-+
-+static struct mtd_partition *parsed_parts;
-+
-+static struct map_info sl2312_serial_map = {
-+// name: "SL2312 serial flash",
-+// size: 4194304, //0x400000,
-+// //buswidth: 4,
-+// bankwidth: 4,
-+// phys: SL2312_FLASH_BASE,
-+//#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
-+// //read32: sl2312_read32,
-+// //read8: sl2312_read8,
-+// copy_from: sl2312_copy_from,
-+// //write8: sl2312_write8,
-+// //write32: sl2312_write32,
-+// read: sl2312_read32,
-+// write: sl2312_write32,
-+// copy_to: sl2312_copy_to
-+//#endif
-+ .name = "SL2312 serial flash",
-+ .size = 4194304, //0x400000,
-+ //buswidth: 4,
-+ .bankwidth = 4,
-+ .phys = SL2312_FLASH_BASE,
-+#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
-+ //read32: sl2312_read32,
-+ //read8: sl2312_read8,
-+ .copy_from = sl2312_copy_from,
-+ //write8: sl2312_write8,
-+ //write32: sl2312_write32,
-+ .read = sl2312_read32,
-+ .write = sl2312_write32,
-+ .copy_to = sl2312_copy_to
-+#endif
-+};
-+
-+
-+
-+static struct mtd_partition sl2312_partitions[] = {
-+
-+
-+ ///* boot code */
-+ //{ name: "bootloader", offset: 0x00000000, size: 0x20000, },
-+ ///* kernel image */
-+ //{ name: "kerel image", offset: 0x000020000, size: 0x2E0000 },
-+ ///* All else is writable (e.g. JFFS) */
-+ //{ name: "user data", offset: 0x00300000, size: 0x00100000, },
-+ /* boot code */
-+ { .name = "bootloader", .offset = 0x00000000, .size = 0x20000, },
-+ /* kernel image */
-+ { .name = "kerel image", .offset = 0x000020000, .size = 0xE0000 },
-+ /* All else is writable (e.g. JFFS) */
-+ { .name = "user data", .offset = 0x00100000, .size = 0x00300000, },
-+
-+
-+};
-+
-+
-+
-+static int __init init_sl2312_maps(void)
-+{
-+ int nr_parts = 0;
-+ struct mtd_partition *parts;
-+
-+ serial_mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
-+ if (!serial_mtd)
-+ return NULL;
-+
-+ memset(serial_mtd, 0, sizeof(struct mtd_info));
-+ //sl2312flash_map.virt = (unsigned long)ioremap(SL2312_FLASH_BASE, FLASH_SIZE);
-+ //sl2312_serial_map.map_priv_1 = (unsigned long)ioremap(SL2312_FLASH_BASE, SFLASH_SIZE);//(unsigned long)FLASH_VBASE;
-+ sl2312_serial_map.virt = (unsigned long)ioremap(SL2312_FLASH_BASE, SFLASH_SIZE);//(unsigned long)ioremap(FLASH_START, SFLASH_SIZE);
-+ if (!sl2312_serial_map.virt) {
-+ printk(" failed to ioremap \n");
-+ return -EIO;
-+ }
-+ serial_mtd = do_map_probe("map_serial", &sl2312_serial_map);
-+ if (serial_mtd) {
-+ //serial_mtd->module = THIS_MODULE;
-+ serial_mtd->owner = THIS_MODULE;
-+
-+ }
-+
-+#ifdef CONFIG_MTD_REDBOOT_PARTS
-+ nr_parts = parse_redboot_partitions(serial_mtd, &parsed_parts);
-+ if (nr_parts > 0)
-+ printk(KERN_NOTICE "Found RedBoot partition table.\n");
-+ else if (nr_parts < 0)
-+ printk(KERN_NOTICE "Error looking for RedBoot partitions.\n");
-+#else
-+ parsed_parts = sl2312_partitions;
-+ parts = sl2312_partitions;
-+ nr_parts = sizeof(sl2312_partitions)/sizeof(*parts);
-+ nr_parts = sizeof(sl2312_partitions)/sizeof(*parsed_parts);
-+#endif /* CONFIG_MTD_REDBOOT_PARTS */
-+
-+ if (nr_parts > 0)
-+ add_mtd_partitions(serial_mtd, parsed_parts, nr_parts);
-+ else
-+ add_mtd_device(serial_mtd);
-+
-+ return 0;
-+}
-+
-+static void __exit cleanup_sl2312_maps(void)
-+{
-+ if (parsed_parts)
-+ del_mtd_partitions(serial_mtd);
-+ else
-+ del_mtd_device(serial_mtd);
-+
-+ map_destroy(serial_mtd);
-+
-+
-+}
-+
-+module_init(init_sl2312_maps);
-+module_exit(cleanup_sl2312_maps);
-+
-+
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Plus Chen <plus@storlink.com.tw>");
-+MODULE_DESCRIPTION("MTD map driver for Storlink Sword boards");
-+
---- /dev/null
-+++ b/drivers/mtd/maps/sl2312-flash-cfi.c
-@@ -0,0 +1,370 @@
-+/*======================================================================
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+======================================================================*/
-+
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/ioport.h>
-+#include <linux/init.h>
-+#include <linux/string.h>
-+
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/partitions.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/io.h>
-+#include <asm/system.h>
-+#include <asm/arch/sl2312.h>
-+#include <linux/mtd/kvctl.h>
-+#include "sl2312_flashmap.h"
-+
-+
-+//extern int parse_afs_partitions(struct mtd_info *, struct mtd_partition **);
-+
-+/* the base address of FLASH control register */
-+#define FLASH_CONTROL_BASE_ADDR (IO_ADDRESS(SL2312_FLASH_CTRL_BASE))
-+#define SL2312_GLOBAL_BASE_ADDR (IO_ADDRESS(SL2312_GLOBAL_BASE))
-+
-+/* define read/write register utility */
-+#define FLASH_READ_REG(offset) (__raw_readl(offset+FLASH_CONTROL_BASE_ADDR))
-+#define FLASH_WRITE_REG(offset,val) (__raw_writel(val,offset+FLASH_CONTROL_BASE_ADDR))
-+
-+/* the offset of FLASH control register */
-+enum EMAC_REGISTER {
-+ FLASH_ID = 0x0000,
-+ FLASH_STATUS = 0x0008,
-+ FLASH_TYPE = 0x000c,
-+ FLASH_ACCESS = 0x0020,
-+ FLASH_ADDRESS = 0x0024,
-+ FLASH_DATA = 0x0028,
-+ FLASH_TIMING = 0x002c,
-+};
-+
-+//#define FLASH_BASE FLASH_CONTROL_BASE_ADDR
-+//#define FLASH_SIZE 0x00800000 //INTEGRATOR_FLASH_SIZE
-+
-+//#define FLASH_PART_SIZE 8388608
-+
-+static unsigned int flash_indirect_access = 0;
-+
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+static unsigned int chip_en = 0x00000000;
-+
-+void sl2312flash_enable_parallel_flash(void)
-+{
-+ unsigned int reg_val;
-+
-+ reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
-+ reg_val = reg_val & 0xfffffffd;
-+ writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
-+ return;
-+}
-+
-+void sl2312flash_disable_parallel_flash(void)
-+{
-+ unsigned int reg_val;
-+
-+ reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
-+ reg_val = reg_val | 0x00000002;
-+ writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
-+ return;
-+}
-+#endif
-+
-+
-+static struct map_info sl2312flash_map =
-+{
-+ name: "SL2312 CFI Flash",
-+ size: FLASH_SIZE,
-+ bankwidth: 2,
-+ //bankwidth: 1, //for 8 bits width
-+ phys: SL2312_FLASH_BASE,
-+};
-+
-+static struct mtd_info *mtd;
-+#if 0
-+static struct mtd_partition sl2312_partitions[] = {
-+ /* boot code */
-+ {
-+ name: "bootloader",
-+ offset: 0x00000000,
-+ size: 0x20000,
-+// mask_flags: MTD_WRITEABLE,
-+ },
-+ /* kernel image */
-+ {
-+ name: "kerel image",
-+ offset: 0x00020000,
-+ size: 0x2E0000
-+ },
-+ /* All else is writable (e.g. JFFS) */
-+ {
-+ name: "user data",
-+ offset: 0x00300000,
-+ size: 0x00100000,
-+ }
-+};
-+#endif
-+
-+
-+
-+static int __init sl2312flash_init(void)
-+{
-+ struct mtd_partition *parts;
-+ int nr_parts = 0;
-+ int ret;
-+#ifndef CONFIG_SL2312_SHARE_PIN
-+ unsigned int reg_val;
-+#endif
-+
-+ printk("SL2312 MTD Driver Init.......\n");
-+
-+#ifndef CONFIG_SL2312_SHARE_PIN
-+ /* enable flash */
-+ reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
-+ reg_val = reg_val & 0xfffffffd;
-+ writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
-+#else
-+ sl2312flash_enable_parallel_flash(); /* enable Parallel FLASH */
-+#endif
-+ FLASH_WRITE_REG(FLASH_ACCESS,0x00004000); /* parallel flash direct access mode */
-+ ret = FLASH_READ_REG(FLASH_ACCESS);
-+ if (ret == 0x00004000)
-+ {
-+ flash_indirect_access = 0; /* parallel flash direct access */
-+ }
-+ else
-+ {
-+ flash_indirect_access = 1; /* parallel flash indirect access */
-+ }
-+
-+ /*
-+ * Also, the CFI layer automatically works out what size
-+ * of chips we have, and does the necessary identification
-+ * for us automatically.
-+ */
-+#ifdef CONFIG_GEMINI_IPI
-+ sl2312flash_map.virt = FLASH_VBASE;//(unsigned int *)ioremap(SL2312_FLASH_BASE, FLASH_SIZE);
-+#else
-+ sl2312flash_map.virt = (unsigned int *)ioremap(SL2312_FLASH_BASE, FLASH_SIZE);
-+#endif
-+ //printk("sl2312flash_map.virt = %08x\n",(unsigned int)sl2312flash_map.virt);
-+
-+// simple_map_init(&sl2312flash_map);
-+
-+ mtd = do_map_probe("cfi_probe", &sl2312flash_map);
-+ if (!mtd)
-+ {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ sl2312flash_disable_parallel_flash(); /* disable Parallel FLASH */
-+#endif
-+ return -ENXIO;
-+ }
-+ mtd->owner = THIS_MODULE;
-+// mtd->erase = flash_erase;
-+// mtd->read = flash_read;
-+// mtd->write = flash_write;
-+
-+ parts = sl2312_partitions;
-+ nr_parts = sizeof(sl2312_partitions)/sizeof(*parts);
-+ ret = add_mtd_partitions(mtd, parts, nr_parts);
-+ /*If we got an error, free all resources.*/
-+ if (ret < 0) {
-+ del_mtd_partitions(mtd);
-+ map_destroy(mtd);
-+ }
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ sl2312flash_disable_parallel_flash(); /* disable Parallel FLASH */
-+#endif
-+ printk("SL2312 MTD Driver Init Success ......\n");
-+ return ret;
-+}
-+
-+static void __exit sl2312flash_exit(void)
-+{
-+ if (mtd) {
-+ del_mtd_partitions(mtd);
-+ map_destroy(mtd);
-+ }
-+
-+ if (sl2312flash_map.virt) {
-+ iounmap((void *)sl2312flash_map.virt);
-+ sl2312flash_map.virt = 0;
-+ }
-+}
-+
-+char chrtohex(char c)
-+{
-+ char val;
-+ if ((c >= '0') && (c <= '9'))
-+ {
-+ val = c - '0';
-+ return val;
-+ }
-+ else if ((c >= 'a') && (c <= 'f'))
-+ {
-+ val = 10 + (c - 'a');
-+ return val;
-+ }
-+ else if ((c >= 'A') && (c <= 'F'))
-+ {
-+ val = 10 + (c - 'A');
-+ return val;
-+ }
-+ printk("<1>Error number\n");
-+ return 0;
-+}
-+
-+
-+int get_vlaninfo(vlaninfo* vlan)
-+{
-+ vctl_mheader head;
-+ vctl_entry entry;
-+ struct mtd_info *mymtd=NULL;
-+ int i, j, loc = 0;
-+ char *payload=0, *tmp1, *tmp2, tmp3[9];
-+ size_t retlen;
-+
-+ #ifdef CONFIG_SL2312_SHARE_PIN
-+ sl2312flash_enable_parallel_flash();
-+ #endif
-+ for(i=0;i<MAX_MTD_DEVICES;i++)
-+ {
-+ mymtd=get_mtd_device(NULL,i);
-+ // printk("mymtd->name: %s\n", mymtd->name);
-+ if(mymtd && !strcmp(mymtd->name,"VCTL"))
-+ {
-+ // printk("%s\n", mymtd->name);
-+ break;
-+ }
-+ }
-+ if( i >= MAX_MTD_DEVICES)
-+ {
-+ printk("Can't find version control\n");
-+ #ifdef CONFIG_SL2312_SHARE_PIN
-+ sl2312flash_disable_parallel_flash();
-+ #endif
-+ return 0;
-+ }
-+
-+ if (!mymtd | !mymtd->read)
-+ {
-+ printk("<1>Can't read Version Configuration\n");
-+ #ifdef CONFIG_SL2312_SHARE_PIN
-+ sl2312flash_disable_parallel_flash();
-+ #endif
-+ return 0;
-+ }
-+
-+ mymtd->read(mymtd, 0, VCTL_HEAD_SIZE, &retlen, (u_char*)&head);
-+ // printk("entry header: %c%c%c%c\n", head.header[0], head.header[1], head.header[2], head.header[3]);
-+ // printk("entry number: %x\n", head.entry_num);
-+ if ( strncmp(head.header, "FLFM", 4) )
-+ {
-+ printk("VCTL is a erase block\n");
-+ #ifdef CONFIG_SL2312_SHARE_PIN
-+ sl2312flash_disable_parallel_flash();
-+ #endif
-+ return 0;
-+ }
-+ loc += retlen;
-+ for (i = 0; i < head.entry_num; i++)
-+ {
-+ mymtd->read(mymtd, loc, VCTL_ENTRY_LEN, &retlen, (u_char*)&entry);
-+ // printk("type: %x\n", entry.type);
-+ // printk("size: %x\n", entry.size);
-+ strncpy(tmp3, entry.header, 4);
-+ if (entry.type == VCT_VLAN)
-+ {
-+ for (j = 0; j < 6 ; j++)
-+ {
-+ vlan[0].mac[j] = 0;
-+ vlan[1].mac[j] = 0;
-+ }
-+ vlan[0].vlanid = 1;
-+ vlan[1].vlanid = 2;
-+ vlan[0].vlanmap = 0x7F;
-+ vlan[1].vlanmap = 0x80;
-+
-+ payload = (char *)kmalloc(entry.size - VCTL_ENTRY_LEN, GFP_KERNEL);
-+ loc += VCTL_ENTRY_LEN;
-+ mymtd->read(mymtd, loc, entry.size - VCTL_ENTRY_LEN, &retlen, payload);
-+ // printk("%s\n", payload);
-+ tmp1 = strstr(payload, "MAC1:");
-+ tmp2 = strstr(payload, "MAC2:");
-+ if(!tmp1||!tmp2){
-+ kfree(payload);
-+ #ifdef CONFIG_SL2312_SHARE_PIN
-+ sl2312flash_disable_parallel_flash();
-+ #endif
-+ printk("Error VCTL format!!\n");
-+ return 0;
-+ }
-+ tmp1 += 7;
-+ tmp2 += 7;
-+
-+
-+ for (j = 0; j < 6; j++)
-+ {
-+ vlan[0].mac[j] = chrtohex(tmp1[2*j])*16 + chrtohex(tmp1[(2*j)+1]);
-+ vlan[1].mac[j] = chrtohex(tmp2[2*j])*16 + chrtohex(tmp2[(2*j)+1]);
-+ }
-+ tmp1 = strstr(payload, "ID1:");
-+ tmp2 = strstr(payload, "ID2:");
-+ tmp1 += 4;
-+ tmp2 += 4;
-+ vlan[0].vlanid = tmp1[0] - '0';
-+ vlan[1].vlanid = tmp2[0] - '0';
-+ tmp1 = strstr(payload, "MAP1:");
-+ tmp2 = strstr(payload, "MAP2:");
-+ tmp1 += 7;
-+ tmp2 += 7;
-+ vlan[0].vlanmap = chrtohex(tmp1[0]) * 16 + chrtohex(tmp1[1]);
-+ vlan[1].vlanmap = chrtohex(tmp2[0]) * 16 + chrtohex(tmp2[1]);
-+ // printk("Vlan1 id:%x map:%02x mac:%x%x%x%x%x%x\n", vlan[0].vlanid, vlan[0].vlanmap, vlan[0].mac[0], vlan[0].mac[1], vlan[0].mac[2], vlan[0].mac[3], vlan[0].mac[4], vlan[0].mac[5]);
-+ // printk("Vlan2 id:%x map:%02x mac:%x%x%x%x%x%x\n", vlan[1].vlanid, vlan[1].vlanmap, vlan[1].mac[0], vlan[1].mac[1], vlan[1].mac[2], vlan[1].mac[3], vlan[1].mac[4], vlan[1].mac[5]);
-+ break;
-+ }
-+ loc += entry.size;
-+ }
-+ if ( entry.type == VCT_VLAN )
-+ {
-+ #ifdef CONFIG_SL2312_SHARE_PIN
-+ sl2312flash_disable_parallel_flash();
-+ #endif
-+ kfree(payload);
-+ return 1;
-+ }
-+ if (i >= head.entry_num)
-+ printk("Can't find vlan information\n");
-+ #ifdef CONFIG_SL2312_SHARE_PIN
-+ sl2312flash_disable_parallel_flash();
-+ #endif
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(get_vlaninfo);
-+
-+
-+module_init(sl2312flash_init);
-+module_exit(sl2312flash_exit);
-+
-+MODULE_AUTHOR("Storlink Ltd");
-+MODULE_DESCRIPTION("CFI map driver");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/mtd/maps/sl2312-flash-m25p80.c
-@@ -0,0 +1,498 @@
-+/*
-+ * $Id: sl2312-flash-m25p80.c,v 1.2 2006/06/02 08:46:02 middle Exp $
-+ *
-+ * Flash and EPROM on Hitachi Solution Engine and similar boards.
-+ *
-+ * (C) 2001 Red Hat, Inc.
-+ *
-+ * GPL'd
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+
-+#include <asm/io.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/partitions.h>
-+#include <asm/hardware.h>
-+
-+#include <asm/arch/sl2312.h>
-+#include <asm/arch/flash.h>
-+#include <linux/init.h> //add
-+#define g_chipen SERIAL_FLASH_CHIP0_EN //ST
-+
-+//static int m25p80_page_program(__u32 address, __u8 data, __u32 schip_en);
-+static void m25p80_write_cmd(__u8 cmd, __u32 schip_en);
-+extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts);
-+
-+
-+static __u32 read_flash_ctrl_reg(__u32 ofs)
-+{
-+ __u32 *base;
-+
-+ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
-+ return __raw_readl(base);
-+}
-+
-+static void write_flash_ctrl_reg(__u32 ofs,__u32 data)
-+{
-+ __u32 *base;
-+
-+ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
-+ __raw_writel(data, base);
-+}
-+
-+static void m25p80_read(__u32 address, __u8 *data, __u32 schip_en)
-+{
-+ __u32 opcode,status;
-+ __u32 value;
-+
-+ //opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ;
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | M25P80_READ;
-+ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+
-+ opcode|=g_chipen;
-+
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ status=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(status&0x80000000)
-+ {
-+ status=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+
-+ value=read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ *data = value & 0xff;
-+}
-+
-+static int m25p80_page_program(__u32 address, __u8 *data, __u32 schip_en)
-+{
-+ __u32 opcode;
-+ __u32 status;
-+ __u32 tmp;
-+ int res = FLASH_ERR_OK;
-+ //volatile FLASH_DATA_T* data_ptr = (volatile FLASH_DATA_T*) data;
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
-+
-+ opcode|=g_chipen;
-+
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(tmp&0x80000000)
-+ {
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ //middle delay_ms(130);
-+ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ if((status&0x02)==0x02)
-+ {
-+ //middle delay_ms(100);
-+ m25p80_write_cmd(M25P80_WRITE_DISABLE, schip_en);
-+ }
-+
-+
-+ m25p80_write_cmd(M25P80_WRITE_ENABLE, schip_en);
-+ ////middle delay_ms(10);
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | M25P80_PAGE_PROGRAM;
-+ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+ write_flash_ctrl_reg(FLASH_WRITE_DATA_OFFSET, *data);
-+
-+ //status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ //while(status!=data)
-+ //{
-+ // status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ // //middle delay_ms(10);
-+ //}
-+
-+ opcode|=g_chipen;
-+
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(tmp&0x80000000)
-+ {
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ //opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
-+
-+ opcode|=g_chipen;
-+
-+
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(tmp&0x80000000)
-+ {
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ //while(status&0xfd)
-+ while(status&0x01)
-+ {
-+ //if((status&0x9c)!=0)
-+ // printf(" m25p80_page_program Protect Status = %x\n",status);
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(tmp&0x80000000)
-+ {
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ flash_delay();
-+ schedule();
-+ //middle delay_ms(50);
-+ }
-+ //printf("status = %x, data = %x\n",status,data);
-+ if((status&0x02)==0x02)
-+ {
-+ //middle delay_ms(100);
-+ m25p80_write_cmd(M25P80_WRITE_DISABLE, schip_en);
-+ }
-+ //};//while (len > 0)
-+ return res;
-+}
-+
-+void m25p80_copy_from(struct map_info *map, void *buf, unsigned long ofs, ssize_t len)
-+{
-+// __u32 size;
-+ __u8 *buffer;
-+ __u32 length;//i, j,
-+
-+ length = len;
-+ buffer = (__u8 *)buf;
-+ while(len)
-+ {
-+ m25p80_read(ofs, buffer, g_chipen);
-+ buffer++;
-+ ofs++;
-+ len --;
-+ } ;
-+
-+}
-+
-+__u32 m25p80_read32(struct map_info *map, unsigned long ofs)
-+{
-+
-+ return read_flash_ctrl_reg(ofs);
-+
-+
-+}
-+
-+void m25p80_write32(struct map_info *map, __u32 d, unsigned long ofs)
-+{
-+
-+ write_flash_ctrl_reg(ofs, d);
-+
-+}
-+
-+void m25p80_copy_to(struct map_info *map, unsigned long ofs, void *buf, ssize_t len)
-+{
-+ __u32 size, i, ret;
-+
-+ while(len > 0)
-+ {
-+ if(len >= M25P80_PAGE_SIZE)
-+ size = M25P80_PAGE_SIZE;
-+ else
-+ size = len;
-+
-+ for(i=0;i<size;i++)
-+ {
-+ ret = m25p80_page_program( (ofs+i), (buf+i), g_chipen);
-+ }
-+ buf+=M25P80_PAGE_SIZE;
-+ ofs+=M25P80_PAGE_SIZE;
-+ len-=M25P80_PAGE_SIZE;
-+
-+ };
-+
-+
-+}
-+
-+static struct mtd_info *serial_mtd;
-+
-+static struct mtd_partition *parsed_parts;
-+
-+static struct map_info m25p80_map = {
-+
-+ .name = "SL2312 serial flash m25p80",
-+ .size = 1048576, //0x100000,
-+ //buswidth: 4,
-+ .bankwidth = 4,
-+ .phys = SL2312_FLASH_BASE,
-+#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
-+ .copy_from = m25p80_copy_from,
-+ .read = m25p80_read32,
-+ .write = m25p80_write32,
-+ .copy_to = m25p80_copy_to
-+#endif
-+};
-+
-+
-+
-+static struct mtd_partition m25p80_partitions[] = {
-+
-+ /* boot code */
-+ { .name = "bootloader", .offset = 0x00000000, .size = 0x20000, },
-+ /* kernel image */
-+ { .name = "kerel image", .offset = 0x000020000, .size = 0xC0000 },
-+ /* All else is writable (e.g. JFFS) */
-+ { .name = "user data", .offset = 0x000E0000, .size = 0x00010000, },
-+
-+
-+};
-+
-+void flash_delay()
-+{
-+ int i,j;
-+ for(i=0;i<0x100;i++)
-+ j=i*3+5;
-+}
-+
-+int m25p80_sector_erase(__u32 address, __u32 schip_en)
-+{
-+ __u32 opcode;
-+ __u32 status;
-+ __u32 tmp;
-+ int res = FLASH_ERR_OK;
-+ //printf("\n-->m25p80_sector_erase");
-+ if(address >= FLASH_START)
-+ address-=FLASH_START;
-+
-+ m25p80_write_cmd(M25P80_WRITE_ENABLE, schip_en);
-+ //printf("\n m25p80_sector_erase : after we-en");
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | M25P80_SECTOR_ERASE;
-+ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+ #ifdef MIDWAY_DIAG
-+ opcode|=schip_en;
-+ #endif
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(tmp&0x80000000)
-+ {
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
-+ #ifdef MIDWAY_DIAG
-+ opcode|=schip_en;
-+ #endif
-+
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(tmp&0x80000000)
-+ {
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ //while(status&0xfd)
-+ while(status&0x01)
-+ {
-+ //if((status&0x9c)!=0)
-+ // printf(" m25p80_sector_erase Protect Status = %x\n",status);
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(tmp&0x80000000)
-+ {
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ flash_delay();
-+ schedule();
-+ //middle delay_ms(50);
-+ }
-+ if((status&0x02)==0x02)
-+ {
-+ //middle delay_ms(100);
-+ m25p80_write_cmd(M25P80_WRITE_DISABLE, schip_en);
-+ }
-+ //printf("\n<--m25p80_sector_erase");
-+ return res;
-+}
-+
-+static void m25p80_write_cmd(__u8 cmd, __u32 schip_en)
-+{
-+ __u32 opcode,tmp;
-+ __u32 status;
-+
-+
-+
-+
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE | cmd;
-+
-+ opcode|=g_chipen;
-+
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(tmp&0x80000000)
-+ {
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ //////
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
-+
-+ opcode|=g_chipen;
-+
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(tmp&0x80000000)
-+ {
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ //middle delay_ms(130);
-+ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ //printf("\ncmd =%x status = %x",cmd,status);
-+ if(cmd==M25P80_WRITE_ENABLE)
-+ {
-+ //printf("\n**-->enable** status = %x",status);
-+ //middle delay_ms(100);
-+ while((status&0x03) != 2)
-+ {
-+ //if((status&0x9c)!=0)
-+ // printf(" M25P80_WRITE_ENABLE Protect Status = %x\n",status);
-+
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(tmp&0x80000000)
-+ {
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ //flash_delay();
-+ }
-+ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ //printf("\n**enable** status = %x",status);
-+ flash_delay();
-+ schedule();
-+ //middle delay_ms(100);
-+ }
-+ }
-+ else if(cmd==M25P80_WRITE_DISABLE)
-+ {
-+ //while((status&0x03) == 2)
-+ // printf("\n**disable** status = %x",status);
-+ //middle delay_ms(100);
-+ while((status&0x03) != 0)
-+ {
-+ //m25p80_write_status((status&0xfd),schip_en);
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(tmp&0x80000000)
-+ {
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ //printf("\n**disable** status = %x",status);
-+ flash_delay();
-+ schedule();
-+ //middle delay_ms(50);
-+ }
-+ }
-+ else
-+ {
-+ //while((status&0x01) !=0)
-+ while((status&0x01) !=0)
-+ {
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(tmp&0x80000000)
-+ {
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ flash_delay();
-+ schedule();
-+ //middle delay_ms(50);
-+ }
-+ }
-+ //////
-+
-+ //printf("\n<-- status = %x",status);
-+}
-+
-+static int __init init_sl2312_m25p80(void)
-+{
-+ int nr_parts = 0;
-+ struct mtd_partition *parts;
-+
-+ serial_mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
-+ if (!serial_mtd)
-+ return NULL;
-+
-+ memset(serial_mtd, 0, sizeof(struct mtd_info));
-+ m25p80_map.virt = (unsigned long)ioremap(SL2312_FLASH_BASE, SFLASH_SIZE);//(unsigned long)ioremap(FLASH_START, SFLASH_SIZE);
-+ if (!m25p80_map.virt) {
-+ printk(" failed to ioremap \n");
-+ return -EIO;
-+ }
-+ serial_mtd = do_map_probe("map_serial", &m25p80_map);
-+ if (serial_mtd) {
-+ serial_mtd->owner = THIS_MODULE;
-+
-+ }
-+
-+#ifdef CONFIG_MTD_REDBOOT_PARTS
-+ nr_parts = parse_redboot_partitions(serial_mtd, &parsed_parts);
-+ if (nr_parts > 0)
-+ printk(KERN_NOTICE "Found RedBoot partition table.\n");
-+ else if (nr_parts < 0)
-+ printk(KERN_NOTICE "Error looking for RedBoot partitions.\n");
-+#else
-+ parsed_parts = m25p80_partitions;
-+ parts = m25p80_partitions;
-+ nr_parts = sizeof(m25p80_partitions)/sizeof(*parts);
-+ nr_parts = sizeof(m25p80_partitions)/sizeof(*parsed_parts);
-+#endif /* CONFIG_MTD_REDBOOT_PARTS */
-+
-+ if (nr_parts > 0)
-+ add_mtd_partitions(serial_mtd, parsed_parts, nr_parts);
-+ else
-+ add_mtd_device(serial_mtd);
-+
-+ return 0;
-+}
-+
-+static void __exit cleanup_sl2312_m25p80(void)
-+{
-+ if (parsed_parts)
-+ del_mtd_partitions(serial_mtd);
-+ else
-+ del_mtd_device(serial_mtd);
-+
-+ map_destroy(serial_mtd);
-+
-+
-+}
-+
-+module_init(init_sl2312_m25p80);
-+module_exit(cleanup_sl2312_m25p80);
-+
-+
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Plus Chen <plus@storlink.com.tw>");
-+MODULE_DESCRIPTION("MTD map driver for Storlink Sword boards");
-+
---- /dev/null
-+++ b/drivers/mtd/maps/sl2312_flashmap.h
-@@ -0,0 +1,20 @@
-+/*
-+ * Please note that the name are used in mkflash script. Therefore
-+ * don't change them. If you want to add different partitions, you
-+ * will need to modify mkflash script as well so that the end image
-+ * is what you include here!
-+ *
-+ * Also, the 7th item is always the size, so please don't add extra
-+ * spaces in the name or other items.
-+ *
-+ * - Alan
-+ */
-+
-+static struct mtd_partition sl2312_partitions[] = {
-+ { name: "RedBoot", offset: 0x00000000, size: 0x00020000, },
-+ { name: "kernel", offset: 0x00020000, size: 0x00100000, },
-+ { name: "rootfs", offset: 0x00120000, size: 0x006A0000, },
-+ { name: "VCTL", offset: 0x007C0000, size: 0x00010000, },
-+ { name: "cfg", offset: 0x007D0000, size: 0x00020000, },
-+ { name: "FIS directory", offset: 0x007F0000, size: 0x00010000, }
-+};
---- /dev/null
-+++ b/drivers/mtd/maps/sl2312_flashmap.h.16MB
-@@ -0,0 +1,21 @@
-+/*
-+ * Please note that the name are used in mkflash script. Therefore
-+ * don't change them. If you want to add different partitions, you
-+ * will need to modify mkflash script as well so that the end image
-+ * is what you include here!
-+ *
-+ * Also, the 7th item is always the size, so please don't add extra
-+ * spaces in the name or other items.
-+ *
-+ * - Alan
-+ */
-+
-+static struct mtd_partition sl2312_partitions[] = {
-+ { name: "RedBoot", offset: 0x00000000, size: 0x00020000, },
-+ { name: "Kernel", offset: 0x00020000, size: 0x00300000, },
-+ { name: "Ramdisk", offset: 0x00320000, size: 0x00600000, },
-+ { name: "Application", offset: 0x00920000, size: 0x00600000, },
-+ { name: "VCTL", offset: 0x00F20000, size: 0x00020000, },
-+ { name: "CurConf", offset: 0x00F40000, size: 0x000A0000, },
-+ { name: "FIS directory", offset: 0x00FE0000, size: 0x00020000, }
-+};
---- /dev/null
-+++ b/drivers/mtd/maps/sl2312_flashmap.h.8MB
-@@ -0,0 +1,21 @@
-+/*
-+ * Please note that the name are used in mkflash script. Therefore
-+ * don't change them. If you want to add different partitions, you
-+ * will need to modify mkflash script as well so that the end image
-+ * is what you include here!
-+ *
-+ * Also, the 7th item is always the size, so please don't add extra
-+ * spaces in the name or other items.
-+ *
-+ * - Alan
-+ */
-+
-+static struct mtd_partition sl2312_partitions[] = {
-+ { name: "RedBoot", offset: 0x00000000, size: 0x00020000, },
-+ { name: "Kernel", offset: 0x00020000, size: 0x00200000, },
-+ { name: "Ramdisk", offset: 0x00220000, size: 0x00280000, },
-+ { name: "Application", offset: 0x004A0000, size: 0x00300000, },
-+ { name: "VCTL", offset: 0x007A0000, size: 0x00020000, },
-+ { name: "CurConf", offset: 0x007C0000, size: 0x00020000, },
-+ { name: "FIS directory", offset: 0x007E0000, size: 0x00020000, }
-+};
---- a/drivers/mtd/mtdchar.c
-+++ b/drivers/mtd/mtdchar.c
-@@ -59,6 +59,77 @@ struct mtd_file_info {
- enum mtd_file_modes mode;
- };
-
-+/***********************************************************************
-+/* Storlink SoC -- flash
-+/***********************************************************************/
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+unsigned int share_pin_flag=0; // bit0:FLASH, bit1:UART, bit2:EMAC, bit3-4:IDE
-+unsigned int check_sleep_flag=0; // bit0:FLASH, bit1:IDE
-+static spinlock_t sl2312_flash_lock = SPIN_LOCK_UNLOCKED;
-+EXPORT_SYMBOL(share_pin_flag);
-+int dbg=0;
-+DECLARE_WAIT_QUEUE_HEAD(wq);
-+extern struct wait_queue_head_t *flash_wait;
-+unsigned int flash_req=0;
-+void mtd_lock()
-+{
-+ struct task_struct *tsk = current;
-+ unsigned int value ;
-+ unsigned long flags;
-+ flash_req = 1;
-+ DECLARE_WAITQUEUE(wait, tsk);
-+ add_wait_queue(&wq, &wait);
-+ for(;;)
-+ {
-+ set_task_state(tsk, TASK_INTERRUPTIBLE);
-+ spin_lock_irqsave(&sl2312_flash_lock,flags);
-+ if((share_pin_flag&0x1E)){//||(check_sleep_flag&0x00000002)) {
-+ spin_unlock_irqrestore(&sl2312_flash_lock, flags);
-+ check_sleep_flag |= 0x00000001;
-+ if(dbg)
-+ printk("mtd yield %x %x\n",share_pin_flag,check_sleep_flag);
-+ wake_up_interruptible(&flash_wait);
-+ schedule();
-+ }
-+ else {
-+ check_sleep_flag &= ~0x01;
-+ share_pin_flag |= 0x00000001 ; // set share pin flag
-+ spin_unlock_irqrestore(&sl2312_flash_lock, flags);
-+ value = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
-+ value = value & (~PFLASH_SHARE_BIT) ;
-+ writel(value,IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
-+ if(dbg)
-+ printk("mtd Go %x %x\n",share_pin_flag,check_sleep_flag);
-+ tsk->state = TASK_RUNNING;
-+ remove_wait_queue(&wq, &wait);
-+ return ;
-+ }
-+ }
-+}
-+
-+void mtd_unlock()
-+{
-+ unsigned int value ;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&sl2312_flash_lock,flags); // Disable IRQ
-+ value = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
-+ value = value | PFLASH_SHARE_BIT ; // Disable Flash PADs
-+ writel(value,IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
-+ share_pin_flag &= ~(0x00000001); // clear share pin flag
-+ check_sleep_flag &= ~0x00000001;
-+ spin_unlock_irqrestore(&sl2312_flash_lock, flags); // Restore IRQ
-+ if (check_sleep_flag & 0x00000002)
-+ {
-+ check_sleep_flag &= ~(0x00000002);
-+ wake_up_interruptible(&flash_wait);
-+ }
-+ DEBUG(MTD_DEBUG_LEVEL0, "Flash Unlock...\n");
-+ flash_req = 0;
-+}
-+#endif
-+/***********************************************************************/
-+
- static loff_t mtd_lseek (struct file *file, loff_t offset, int orig)
- {
- struct mtd_file_info *mfi = file->private_data;
-@@ -162,13 +233,21 @@ static ssize_t mtd_read(struct file *fil
- int len;
- char *kbuf;
-
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_lock(); // sl2312 share pin lock
-+#endif
-+
- DEBUG(MTD_DEBUG_LEVEL0,"MTD_read\n");
-
- if (*ppos + count > mtd->size)
- count = mtd->size - *ppos;
-
-- if (!count)
-+ if (!count){
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return 0;
-+ }
-
- /* FIXME: Use kiovec in 2.5 to lock down the user's buffers
- and pass them directly to the MTD functions */
-@@ -178,8 +257,12 @@ static ssize_t mtd_read(struct file *fil
- else
- kbuf=kmalloc(count, GFP_KERNEL);
-
-- if (!kbuf)
-+ if (!kbuf) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -ENOMEM;
-+ }
-
- while (count) {
-
-@@ -224,6 +307,9 @@ static ssize_t mtd_read(struct file *fil
- *ppos += retlen;
- if (copy_to_user(buf, kbuf, retlen)) {
- kfree(kbuf);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
- }
- else
-@@ -235,13 +321,19 @@ static ssize_t mtd_read(struct file *fil
- count = 0;
- }
- else {
-- kfree(kbuf);
-+ kfree(kbuf);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return ret;
- }
-
- }
-
- kfree(kbuf);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return total_retlen;
- } /* mtd_read */
-
-@@ -255,24 +347,40 @@ static ssize_t mtd_write(struct file *fi
- int ret=0;
- int len;
-
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_lock(); // sl2312 share pin lock
-+#endif
-+
- DEBUG(MTD_DEBUG_LEVEL0,"MTD_write\n");
-
-- if (*ppos == mtd->size)
-+ if (*ppos == mtd->size){
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -ENOSPC;
-+ }
-
- if (*ppos + count > mtd->size)
- count = mtd->size - *ppos;
-
-- if (!count)
-+ if (!count){
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return 0;
-+ }
-
- if (count > MAX_KMALLOC_SIZE)
- kbuf=kmalloc(MAX_KMALLOC_SIZE, GFP_KERNEL);
- else
- kbuf=kmalloc(count, GFP_KERNEL);
-
-- if (!kbuf)
-+ if (!kbuf) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -ENOMEM;
-+ }
-
- while (count) {
-
-@@ -283,6 +391,9 @@ static ssize_t mtd_write(struct file *fi
-
- if (copy_from_user(kbuf, buf, len)) {
- kfree(kbuf);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
- }
-
-@@ -323,11 +434,17 @@ static ssize_t mtd_write(struct file *fi
- }
- else {
- kfree(kbuf);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return ret;
- }
- }
-
- kfree(kbuf);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return total_retlen;
- } /* mtd_write */
-
-@@ -381,36 +498,67 @@ static int mtd_ioctl(struct inode *inode
- u_long size;
- struct mtd_info_user info;
-
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_lock(); // sl2312 share pin lock
-+#endif
-+
- DEBUG(MTD_DEBUG_LEVEL0, "MTD_ioctl\n");
-
- size = (cmd & IOCSIZE_MASK) >> IOCSIZE_SHIFT;
- if (cmd & IOC_IN) {
- if (!access_ok(VERIFY_READ, argp, size))
-+ {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
-+ }
- }
- if (cmd & IOC_OUT) {
- if (!access_ok(VERIFY_WRITE, argp, size))
-+ {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
-+ }
- }
-
- switch (cmd) {
- case MEMGETREGIONCOUNT:
- if (copy_to_user(argp, &(mtd->numeraseregions), sizeof(int)))
-+ {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
-+ }
- break;
-
- case MEMGETREGIONINFO:
- {
- struct region_info_user ur;
-
-- if (copy_from_user(&ur, argp, sizeof(struct region_info_user)))
-+ if (copy_from_user(&ur, argp, sizeof(struct region_info_user))) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
-+ }
-
-- if (ur.regionindex >= mtd->numeraseregions)
-+ if (ur.regionindex >= mtd->numeraseregions) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EINVAL;
-+ }
- if (copy_to_user(argp, &(mtd->eraseregions[ur.regionindex]),
-- sizeof(struct mtd_erase_region_info)))
-+ sizeof(struct mtd_erase_region_info))) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
-+ }
- break;
- }
-
-@@ -433,7 +581,12 @@ static int mtd_ioctl(struct inode *inode
- struct erase_info *erase;
-
- if(!(file->f_mode & 2))
-+ {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EPERM;
-+ }
-
- erase=kzalloc(sizeof(struct erase_info),GFP_KERNEL);
- if (!erase)
-@@ -447,6 +600,9 @@ static int mtd_ioctl(struct inode *inode
- if (copy_from_user(&erase->addr, argp,
- sizeof(struct erase_info_user))) {
- kfree(erase);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
- }
- erase->mtd = mtd;
-@@ -484,14 +640,26 @@ static int mtd_ioctl(struct inode *inode
- struct mtd_oob_buf buf;
- struct mtd_oob_ops ops;
-
-- if(!(file->f_mode & 2))
-+ if(!(file->f_mode & 2)) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EPERM;
-+ }
-
-- if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf)))
-+ if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf))) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
-+ }
-
-- if (buf.length > 4096)
-+ if (buf.length > 4096) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EINVAL;
-+ }
-
- if (!mtd->write_oob)
- ret = -EOPNOTSUPP;
-@@ -499,8 +667,12 @@ static int mtd_ioctl(struct inode *inode
- ret = access_ok(VERIFY_READ, buf.ptr,
- buf.length) ? 0 : EFAULT;
-
-- if (ret)
-+ if (ret) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return ret;
-+ }
-
- ops.ooblen = buf.length;
- ops.ooboffs = buf.start & (mtd->oobsize - 1);
-@@ -536,19 +708,35 @@ static int mtd_ioctl(struct inode *inode
- struct mtd_oob_buf buf;
- struct mtd_oob_ops ops;
-
-- if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf)))
-+ if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf))) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
-+ }
-
-- if (buf.length > 4096)
-+ if (buf.length > 4096) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EINVAL;
-+ }
-
-- if (!mtd->read_oob)
-+ if (!mtd->read_oob) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- ret = -EOPNOTSUPP;
-+ }
- else
- ret = access_ok(VERIFY_WRITE, buf.ptr,
- buf.length) ? 0 : -EFAULT;
-- if (ret)
-+ if (ret) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return ret;
-+ }
-
- ops.ooblen = buf.length;
- ops.ooboffs = buf.start & (mtd->oobsize - 1);
-@@ -580,7 +768,12 @@ static int mtd_ioctl(struct inode *inode
- struct erase_info_user info;
-
- if (copy_from_user(&info, argp, sizeof(info)))
-+ {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
-+ }
-
- if (!mtd->lock)
- ret = -EOPNOTSUPP;
-@@ -594,7 +787,12 @@ static int mtd_ioctl(struct inode *inode
- struct erase_info_user info;
-
- if (copy_from_user(&info, argp, sizeof(info)))
-+ {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
-+ }
-
- if (!mtd->unlock)
- ret = -EOPNOTSUPP;
-@@ -629,11 +827,21 @@ static int mtd_ioctl(struct inode *inode
- loff_t offs;
-
- if (copy_from_user(&offs, argp, sizeof(loff_t)))
-+ {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
-+ }
- if (!mtd->block_isbad)
- ret = -EOPNOTSUPP;
- else
-+ {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return mtd->block_isbad(mtd, offs);
-+ }
- break;
- }
-
-@@ -642,11 +850,21 @@ static int mtd_ioctl(struct inode *inode
- loff_t offs;
-
- if (copy_from_user(&offs, argp, sizeof(loff_t)))
-+ {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
-+ }
- if (!mtd->block_markbad)
- ret = -EOPNOTSUPP;
- else
-+ {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return mtd->block_markbad(mtd, offs);
-+ }
- break;
- }
-
-@@ -654,8 +872,12 @@ static int mtd_ioctl(struct inode *inode
- case OTPSELECT:
- {
- int mode;
-- if (copy_from_user(&mode, argp, sizeof(int)))
-+ if (copy_from_user(&mode, argp, sizeof(int))) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
-+ }
-
- mfi->mode = MTD_MODE_NORMAL;
-
-@@ -670,7 +892,12 @@ static int mtd_ioctl(struct inode *inode
- {
- struct otp_info *buf = kmalloc(4096, GFP_KERNEL);
- if (!buf)
-+ {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -ENOMEM;
-+ }
- ret = -EOPNOTSUPP;
- switch (mfi->mode) {
- case MTD_MODE_OTP_FACTORY:
-@@ -701,12 +928,24 @@ static int mtd_ioctl(struct inode *inode
- {
- struct otp_info info;
-
-- if (mfi->mode != MTD_MODE_OTP_USER)
-+ if (mfi->mode != MTD_MODE_OTP_USER) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EINVAL;
-- if (copy_from_user(&info, argp, sizeof(info)))
-+ }
-+ if (copy_from_user(&info, argp, sizeof(info))) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
-- if (!mtd->lock_user_prot_reg)
-+ }
-+ if (!mtd->lock_user_prot_reg) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EOPNOTSUPP;
-+ }
- ret = mtd->lock_user_prot_reg(mtd, info.start, info.length);
- break;
- }
-@@ -742,8 +981,12 @@ static int mtd_ioctl(struct inode *inode
- break;
-
- case MTD_MODE_RAW:
-- if (!mtd->read_oob || !mtd->write_oob)
-+ if (!mtd->read_oob || !mtd->write_oob) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EOPNOTSUPP;
-+ }
- mfi->mode = arg;
-
- case MTD_MODE_NORMAL:
-@@ -766,6 +1009,10 @@ static int mtd_ioctl(struct inode *inode
- ret = -ENOTTY;
- }
-
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
-+
- return ret;
- } /* memory_ioctl */
-
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -44,6 +44,13 @@ config MTD_NAND_AUTCPU12
- This enables the driver for the autronix autcpu12 board to
- access the SmartMediaCard.
-
-+config MTD_NAND_SL2312
-+ tristate "NAND Flash device on Storlink board"
-+ depends on ARM && MTD_NAND && ARCH_SL2312
-+ help
-+ This enables the driver for the Storlink board to
-+ access the nand device.
-+
- config MTD_NAND_EDB7312
- tristate "Support for Cirrus Logic EBD7312 evaluation board"
- depends on ARCH_EDB7312
---- /dev/null
-+++ b/drivers/mtd/nand/sl2312-flash-nand.c
-@@ -0,0 +1,2287 @@
-+/*
-+ * drivers/mtd/sl2312.c
-+ *
-+ * $Id: sl2312-flash-nand.c,v 1.5 2006/06/15 07:02:29 middle Exp $
-+ *
-+ * Copyright (C) 2001 Toshiba Corporation
-+ *
-+ * 2003 (c) MontaVista Software, Inc. This file is licensed under
-+ * the terms of the GNU General Public License version 2. This program
-+ * is licensed "as is" without any warranty of any kind, whether express
-+ * or implied.
-+ *
-+ */
-+
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/mtd/nand_ecc.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/delay.h>
-+#include <asm/io.h>
-+#include <asm/hardware.h>
-+#include <asm/arch/sl2312.h>
-+#include "sl2312-flash-nand.h"
-+
-+
-+#include <linux/errno.h>
-+#include <linux/sched.h>
-+#include <linux/types.h>
-+#include <linux/mtd/compatmac.h>
-+#include <linux/interrupt.h>
-+#include <linux/bitops.h>
-+
-+
-+/*
-+ * NAND low-level MTD interface functions
-+ */
-+static void sl2312_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len);
-+static void sl2312_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len);
-+static int sl2312_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len);
-+
-+static int sl2312_nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);
-+static int sl2312_nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);
-+static int sl2312_nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);
-+static int sl2312_nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf);
-+static int sl2312_nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
-+ size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);
-+static int sl2312_nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char *buf);
-+static int sl2312_nand_writev (struct mtd_info *mtd, const struct kvec *vecs,
-+ unsigned long count, loff_t to, size_t * retlen);
-+static int sl2312_nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs,
-+ unsigned long count, loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
-+static int sl2312_nand_erase (struct mtd_info *mtd, struct erase_info *instr, int allowbbt);
-+static void sl2312_nand_sync (struct mtd_info *mtd);
-+static int sl2312_nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf, struct nand_oobinfo *oobsel);
-+static int sl2312_nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt);
-+static int sl2312_nand_erase_block(struct mtd_info *mtd, int page);
-+
-+/*
-+ * MTD structure for sl2312 NDFMC
-+ */
-+static struct mtd_info *sl2312_mtd = NULL;
-+static int nand_page=0,nand_col=0;
-+
-+/* Define default oob placement schemes for large and small page devices */
-+static struct nand_oobinfo nand_oob_8 = {
-+ .useecc = MTD_NANDECC_AUTOPLACE,
-+ .eccbytes = 3,
-+ .eccpos = {0, 1, 2},
-+ .oobfree = { {3, 2}, {6, 2} }
-+};
-+
-+static struct nand_oobinfo nand_oob_16 = {
-+ .useecc = MTD_NANDECC_AUTOPLACE,
-+ .eccbytes = 6,
-+ .eccpos = {0, 1, 2, 3, 6, 7},
-+ .oobfree = { {8, 8} }
-+};
-+
-+static struct nand_oobinfo nand_oob_64 = {
-+ .useecc = MTD_NANDECC_AUTOPLACE,
-+ .eccbytes = 24,
-+ .eccpos = {
-+ 40, 41, 42, 43, 44, 45, 46, 47,
-+ 48, 49, 50, 51, 52, 53, 54, 55,
-+ 56, 57, 58, 59, 60, 61, 62, 63},
-+ .oobfree = { {2, 38} }
-+};
-+
-+
-+/*
-+ * Define partitions for flash device
-+ */
-+/* the base address of FLASH control register */
-+#define FLASH_CONTROL_BASE_ADDR (IO_ADDRESS(SL2312_FLASH_CTRL_BASE))
-+#define SL2312_GLOBAL_BASE_ADDR (IO_ADDRESS(SL2312_GLOBAL_BASE))
-+//#define SL2312_FLASH_BASE_ADDR (IO_ADDRESS(SL2312_FLASH_BASE))
-+#define SL2312_FLASH_BASE_ADDR FLASH_VADDR(SL2312_FLASH_BASE)
-+static unsigned int CHIP_EN;
-+/* define read/write register utility */
-+//#define FLASH_READ_REG(offset) (__raw_readl(offset+FLASH_CONTROL_BASE_ADDR))
-+//#define FLASH_WRITE_REG(offset,val) (__raw_writel(val,offset+FLASH_CONTROL_BASE_ADDR))
-+//#define FLASH_READ_DATA(offset) (__raw_readb(offset+SL2312_FLASH_BASE_ADDR))
-+//#define FLASH_WRITE_DATA(offset,val) (__raw_writeb(val,offset+SL2312_FLASH_BASE_ADDR))
-+
-+unsigned int FLASH_READ_REG(unsigned int addr)
-+{
-+ unsigned int *base;
-+ unsigned int data;
-+
-+ base = (unsigned int *)(FLASH_CONTROL_BASE_ADDR + addr);
-+ data = *base;
-+ return (data);
-+}
-+
-+void FLASH_WRITE_REG(unsigned int addr,unsigned int data)
-+{
-+ unsigned int *base;
-+
-+ base = (unsigned int *)(FLASH_CONTROL_BASE_ADDR + addr);
-+ *base = data;
-+ return;
-+}
-+
-+unsigned int FLASH_READ_DATA(unsigned int addr)
-+{
-+ unsigned char *base;
-+ unsigned int data;
-+
-+ base = (unsigned char *)(SL2312_FLASH_BASE_ADDR + addr);
-+ data = *base;
-+ return (data);
-+}
-+
-+void FLASH_WRITE_DATA(unsigned int addr,unsigned int data)
-+{
-+ unsigned char *base;
-+
-+ base = (unsigned char *)(SL2312_FLASH_BASE_ADDR + addr);
-+ *base = data;
-+ return;
-+}
-+
-+/* the offset of FLASH control register */
-+enum NFLASH_REGISTER {
-+ NFLASH_ID = 0x0000,
-+ NFLASH_STATUS = 0x0008,
-+ NFLASH_TYPE = 0x000c,
-+ NFLASH_ACCESS = 0x0030,
-+ NFLASH_COUNT = 0x0034,
-+ NFLASH_CMD_ADDR = 0x0038,
-+ NFLASH_ADDRESS = 0x003C,
-+ NFLASH_DATA = 0x0040,
-+ NFLASH_TIMING = 0x004C,
-+ NFLASH_ECC_STATUS = 0x0050,
-+ NFLASH_ECC_CONTROL = 0x0054,
-+ NFLASH_ECC_OOB = 0x005c,
-+ NFLASH_ECC_CODE_GEN0 = 0x0060,
-+ NFLASH_ECC_CODE_GEN1 = 0x0064,
-+ NFLASH_ECC_CODE_GEN2 = 0x0068,
-+ NFLASH_ECC_CODE_GEN3 = 0x006C,
-+ NFLASH_FIFO_CONTROL = 0x0070,
-+ NFLASH_FIFO_STATUS = 0x0074,
-+ NFLASH_FIFO_ADDRESS = 0x0078,
-+ NFLASH_FIFO_DATA = 0x007c,
-+};
-+
-+
-+
-+//#define FLASH_BASE FLASH_CONTROL_BASE_ADDR
-+//#define FLASH_SIZE 0x00800000 //INTEGRATOR_FLASH_SIZE
-+
-+//#define FLASH_PART_SIZE 8388608
-+
-+//static unsigned int flash_indirect_access = 0;
-+
-+
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+void sl2312flash_enable_nand_flash(void)
-+{
-+ unsigned int reg_val;
-+
-+ reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
-+ reg_val = reg_val & 0xfffffffb;
-+ writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
-+ return;
-+}
-+
-+void sl2312flash_disable_nand_flash(void)
-+{
-+ unsigned int reg_val;
-+
-+ reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
-+ reg_val = reg_val | 0x00000004;
-+ writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
-+ return;
-+}
-+#endif
-+
-+extern struct nand_oobinfo jffs2_oobinfo;
-+/*
-+ * Define partitions for flash devices
-+ */
-+
-+static struct mtd_partition sl2312_partitions[] = {
-+ { name: "RedBoot", offset: 0x00000000, size: 0x0020000, },
-+ { name: "Kernel", offset: 0x00020000, size: 0x00200000, },
-+ { name: "Ramdisk", offset: 0x00220000, size: 0x00280000, },
-+ { name: "Application", offset: 0x004A0000, size: 0x00320000, },
-+ { name: "VCTL", offset: 0x007C0000, size: 0x20000, },
-+ { name: "CurConf", offset: 0x007E0000, size: 0x20000, },
-+ { name: "FIS directory", offset: 0x007e0000, size: 0x00020000, }
-+
-+};
-+
-+
-+/*
-+ * hardware specific access to control-lines
-+*/
-+static void sl2312_hwcontrol(struct mtd_info *mtd, int cmd)
-+{
-+
-+ return ;
-+}
-+
-+static int sl2312_nand_scan_bbt(struct mtd_info *mtd)
-+{
-+ return 0;
-+}
-+
-+/**
-+ * nand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad
-+ * @mtd: MTD device structure
-+ * @ofs: offset relative to mtd start
-+ */
-+static int sl2312_nand_block_isbad (struct mtd_info *mtd, loff_t ofs)
-+{
-+ /* Check for invalid offset */
-+ if (ofs > mtd->size)
-+ return -EINVAL;
-+
-+ return sl2312_nand_block_checkbad (mtd, ofs, 1, 0);
-+}
-+
-+/**
-+ * nand_block_checkbad - [GENERIC] Check if a block is marked bad
-+ * @mtd: MTD device structure
-+ * @ofs: offset from device start
-+ * @getchip: 0, if the chip is already selected
-+ * @allowbbt: 1, if its allowed to access the bbt area
-+ *
-+ * Check, if the block is bad. Either by reading the bad block table or
-+ * calling of the scan function.
-+ */
-+
-+static int sl2312_nand_erase_block(struct mtd_info *mtd, int page)
-+{
-+ int opcode;
-+ /* Send commands to erase a page */
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
-+
-+ if(mtd->oobblock > 528)
-+ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff21); // 3 address & 2 command
-+ else
-+ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff11); // 2 address & 2 command
-+
-+ FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x0000d060); // write read id command
-+ FLASH_WRITE_REG(NFLASH_ADDRESS, page); //write address 0x00
-+
-+
-+
-+ /* read maker code */
-+ opcode = 0x80003000|DWIDTH|CHIP_EN; //set start bit & 8bits write command
-+ FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+
-+ while(opcode&0x80000000) //polling flash access 31b
-+ {
-+ opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+ //sl2312_flash_delay();
-+ schedule();
-+ //cond_resched();
-+ }
-+}
-+
-+void sl2312_flash_delay(void)
-+{
-+ int i;
-+
-+ for(i=0; i<50; i++)
-+ i=i;
-+}
-+
-+static int sl2312_nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt)
-+{
-+ struct nand_chip *this = mtd->priv;
-+
-+ if (!this->bbt)
-+ return this->block_bad(mtd, ofs, getchip);
-+
-+ /* Return info from the table */
-+ return nand_isbad_bbt (mtd, ofs, allowbbt);
-+}
-+
-+/**
-+ * nand_block_markbad - [MTD Interface] Mark the block at the given offset as bad
-+ * @mtd: MTD device structure
-+ * @ofs: offset relative to mtd start
-+ */
-+static int sl2312_nand_block_markbad (struct mtd_info *mtd, loff_t ofs)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ int ret;
-+
-+ if ((ret = sl2312_nand_block_isbad(mtd, ofs))) {
-+ /* If it was bad already, return success and do nothing. */
-+ if (ret > 0)
-+ return 0;
-+ return ret;
-+ }
-+
-+ return this->block_markbad(mtd, ofs);
-+}
-+
-+/*
-+ * Get chip for selected access
-+ */
-+static inline void sl2312_nand_get_chip (struct nand_chip *this, struct mtd_info *mtd, int new_state, int *erase_state)
-+{
-+
-+ DECLARE_WAITQUEUE (wait, current);
-+
-+ /*
-+ * Grab the lock and see if the device is available
-+ * For erasing, we keep the spinlock until the
-+ * erase command is written.
-+ */
-+retry:
-+ spin_lock_bh (&this->chip_lock);
-+
-+ if (this->state == FL_READY) {
-+ this->state = new_state;
-+ if (new_state != FL_ERASING)
-+ spin_unlock_bh (&this->chip_lock);
-+ return;
-+ }
-+
-+ if (this->state == FL_ERASING) {
-+ if (new_state != FL_ERASING) {
-+ this->state = new_state;
-+ spin_unlock_bh (&this->chip_lock);
-+ this->select_chip(mtd, 0); /* select in any case */
-+ this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
-+ return;
-+ }
-+ }
-+
-+ set_current_state (TASK_UNINTERRUPTIBLE);
-+ add_wait_queue (&this->wq, &wait);
-+ spin_unlock_bh (&this->chip_lock);
-+ schedule ();
-+ remove_wait_queue (&this->wq, &wait);
-+ goto retry;
-+}
-+
-+/*
-+* read device ready pin
-+*/
-+static int sl2312_device_ready(struct mtd_info *mtd)
-+{
-+ int ready;
-+
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
-+ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f000070); //set only command no address and two data
-+
-+ FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x00000070); //write read status command
-+
-+
-+ ready = 0x80002000|DWIDTH|CHIP_EN; //set start bit & 8bits read command
-+ FLASH_WRITE_REG(NFLASH_ACCESS, ready);
-+
-+ while(ready&0x80000000) //polling flash access 31b
-+ {
-+ ready=FLASH_READ_REG(NFLASH_ACCESS);
-+ //sl2312_flash_delay();
-+ schedule();
-+ }
-+ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+ ready=FLASH_READ_REG(NFLASH_DATA)&0xff;
-+ return ready;
-+}
-+void sl2312_enable_hwecc(struct mtd_info *mtd, int mode)
-+{
-+ /* reset first */
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x80000001); //set 31b = 0
-+
-+}
-+
-+
-+void sl2312_device_setup(void)
-+{
-+
-+}
-+static u_char sl2312_nand_read_byte(struct mtd_info *mtd)
-+{
-+
-+ unsigned int data=0, page=0, col=0, tmp, i;
-+
-+ printk ("**************************sl2312_nand_read_byte !! \n");
-+ //page = FLASH_READ_REG(NFLASH_ADDRESS)&0xffffff00;
-+ //col = FLASH_READ_REG(NFLASH_ADDRESS)&0x000000ff;
-+ page = nand_page;
-+ col = nand_col;
-+ for(i=0;i<(mtd->oobblock+mtd->oobsize);i++)
-+ {
-+ if(i==col)
-+ data = FLASH_READ_DATA(page*mtd->oobblock +i);
-+ else
-+ tmp = FLASH_READ_DATA(page*mtd->oobblock +i);
-+ }
-+ return data&0xff;
-+}
-+
-+static void sl2312_nand_write_byte(struct mtd_info *mtd, u_char byte)
-+{
-+ //struct nand_chip *this = mtd->priv;
-+ unsigned int page=0, col=0, i;
-+ u_char *databuf,oobbuf[mtd->oobsize];
-+ size_t retlen;
-+ retlen=0;
-+ printk ("********************sl2312_nand_write_byte !! \n");
-+ page = nand_page;
-+ col = nand_col;
-+ databuf = kmalloc (mtd->oobsize+mtd->oobblock,GFP_KERNEL);
-+
-+ if (!databuf) {
-+ printk ("sl2312_nand_write_byte : Unable to allocate SL2312 NAND MTD device structure.\n");
-+
-+ }
-+
-+ for(i=0;i<(mtd->oobblock+mtd->oobsize);i++)
-+ databuf[i] = FLASH_READ_DATA(page*mtd->oobblock +i);
-+
-+ databuf[col] = byte;
-+ sl2312_nand_write_ecc (mtd, page, mtd->oobblock, &retlen, databuf, oobbuf, NULL);
-+
-+}
-+
-+static void sl2312_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
-+{
-+ int i, page=0,col=0;
-+ struct nand_chip *this = mtd->priv;
-+ u_char *databuf, *oobbuf;
-+ size_t retlen;
-+ retlen=0;
-+
-+
-+ printk ("***********************sl2312_nand_write_buf !! \n");
-+ databuf = &(this->data_buf[0]);
-+ oobbuf = &(this->data_buf[mtd->oobblock]);
-+ for (i = 0; i < mtd->oobsize; i++)
-+ oobbuf[i] = 0xff;
-+
-+ if(len < mtd->oobblock)
-+ {
-+ //addr = FLASH_READ_REG(NFLASH_ADDRESS);
-+ //page = FLASH_READ_REG(NFLASH_ADDRESS)&0xffffff00;
-+ //col = FLASH_READ_REG(NFLASH_ADDRESS)&0x000000ff;
-+ page = nand_page;
-+ col = nand_col;
-+
-+ sl2312_nand_read_ecc (mtd, page, mtd->oobblock , &retlen, databuf, oobbuf, NULL);
-+
-+ for(i=col;i<len;i++)
-+ databuf[col+i] = buf[i];
-+
-+ sl2312_nand_write_ecc (mtd, page, mtd->oobblock, &retlen, databuf, oobbuf, NULL);
-+
-+ }
-+
-+}
-+
-+static void sl2312_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
-+{
-+ int i, page=0,col=0,addr=0,tmp=0;
-+ //struct nand_chip *this = mtd->priv;
-+ printk ("********************sl2312_nand_read_buf !! \n");
-+ if(len < mtd->oobblock)
-+ {
-+ //addr = FLASH_READ_REG(NFLASH_ADDRESS);
-+ //page = FLASH_READ_REG(NFLASH_ADDRESS)&0xffffff00;
-+ //col = FLASH_READ_REG(NFLASH_ADDRESS)&0x000000ff;
-+ page = nand_page;
-+ col = nand_col;
-+ for (i=col; i<((mtd->oobblock+mtd->oobsize)-col); i++)
-+ {
-+ if(i<len)
-+ buf[i] = FLASH_READ_DATA(addr+i);
-+ else
-+ tmp = FLASH_READ_DATA(addr+i);
-+ }
-+ }
-+}
-+
-+static int sl2312_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
-+{
-+ int i;
-+ //struct nand_chip *this = mtd->priv;
-+ u_char *datatmp, *oobtmp;
-+ size_t retlen;
-+ retlen=0;
-+
-+ datatmp = kmalloc (mtd->oobblock,GFP_KERNEL);
-+ oobtmp = kmalloc (mtd->oobsize,GFP_KERNEL);
-+
-+ if ((!datatmp)||(!oobtmp)) {
-+ printk ("sl2312_nand_verify_buf : Unable to allocate SL2312 NAND MTD device structure.\n");
-+
-+ }
-+ //page = nand_page;
-+ for(i=0;i<mtd->oobblock;i++)
-+ datatmp[i] = FLASH_READ_DATA(nand_page*mtd->oobblock +i);
-+ /* read oobdata */
-+ for (i = 0; i < mtd->oobsize; i++)
-+ oobtmp[i] = FLASH_READ_DATA(nand_page*mtd->oobblock + mtd->oobblock + i);
-+
-+ if(len==mtd->oobblock)
-+ {
-+ for (i=0; i<len; i++)
-+ {
-+ if (buf[i] != datatmp[i])
-+ {
-+ kfree(datatmp);
-+ kfree(oobtmp);
-+ printk("Data verify error -> page: %x, byte: %x \n",nand_page,i);
-+ return i;
-+ }
-+ }
-+ }
-+ else if(len == mtd->oobsize)
-+ {
-+ for (i=0; i<len; i++)
-+ {
-+ if (buf[i] != oobtmp[i])
-+ {
-+ kfree(datatmp);
-+ kfree(oobtmp);
-+ printk("OOB verify error -> page: %x, byte: %x \n",nand_page,i);
-+ return i;
-+ }
-+ }
-+ }
-+ else
-+ {
-+ printk (KERN_WARNING "sl2312_nand_verify_buf : verify length not match 0x%08x\n", len);
-+ kfree(datatmp);
-+ kfree(oobtmp);
-+ return -1;
-+ }
-+
-+ kfree(datatmp);
-+ kfree(oobtmp);
-+ return 0;
-+}
-+
-+/*
-+ * Send command to NAND device
-+ */
-+static void sl2312_nand_command (struct mtd_info *mtd, unsigned command, int column, int page_addr)
-+{
-+ register struct nand_chip *this = mtd->priv;
-+ int opcode;
-+
-+
-+ /*
-+ * program and erase have their own busy handlers
-+ * status and sequential in needs no delay
-+ */
-+ switch (command) {
-+
-+ case NAND_CMD_PAGEPROG:
-+ case NAND_CMD_ERASE1:
-+ case NAND_CMD_ERASE2:
-+ case NAND_CMD_SEQIN:
-+ case NAND_CMD_STATUS:
-+ case NAND_CMD_READ0:
-+
-+ /*
-+ * Write out the command to the device.
-+ */
-+ if (column != -1 || page_addr != -1) {
-+
-+ /* Serially input address */
-+ if (column != -1)
-+ //FLASH_WRITE_REG(NFLASH_ADDRESS,column);
-+ nand_col=column;
-+
-+ opcode = FLASH_READ_REG(NFLASH_ADDRESS);
-+
-+ if (page_addr != -1)
-+ //FLASH_WRITE_REG(NFLASH_ADDRESS,opcode|(page_addr<<8));
-+ nand_page = page_addr;
-+
-+ }
-+ return;
-+
-+ case NAND_CMD_RESET:
-+ if (this->dev_ready)
-+ break;
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
-+ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff70); //set only command and no other data
-+ FLASH_WRITE_REG(NFLASH_CMD_ADDR, NAND_CMD_RESET); //write reset command
-+
-+ opcode = 0x80002000|DWIDTH|CHIP_EN; //set start bit & 8bits read command
-+ FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+
-+ while(opcode&0x80000000) //polling flash access 31b
-+ {
-+ opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+ //sl2312_flash_delay();
-+ schedule();
-+ }
-+ while ( !(sl2312_device_ready(mtd) & 0x40));
-+ {
-+ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+ //sl2312_flash_delay();
-+ schedule();
-+ return;
-+ }
-+ /* This applies to read commands */
-+ default:
-+ /*
-+ * If we don't have access to the busy pin, we apply the given
-+ * command delay
-+ */
-+ if (!this->dev_ready) {
-+ udelay (this->chip_delay);
-+ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+ return;
-+ }
-+ }
-+
-+ /* wait until command is processed */
-+ while (!this->dev_ready(mtd));
-+
-+}
-+/*Add function*/
-+static void nand_read_id(int chip_no, unsigned char *id)
-+{
-+ unsigned int opcode, i;
-+
-+ if(chip_no==0)
-+ CHIP_EN = NFLASH_CHIP0_EN;
-+ else
-+ CHIP_EN = NFLASH_CHIP1_EN;
-+
-+ opcode = FLASH_READ_REG(NFLASH_TYPE);
-+
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
-+ if((opcode&0x00000300)<=0x00000100)
-+ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f000100); //set only command & address and two data
-+ else
-+ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f000300); //set only command & address and 4 data
-+
-+ FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x00000090); //write read id command
-+ FLASH_WRITE_REG(NFLASH_ADDRESS, 0x00000000); //write address 0x00
-+
-+ /* read maker code */
-+ opcode = 0x80002000|DWIDTH|CHIP_EN;//|chip0_en; //set start bit & 8bits read command
-+ FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+ opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+ while(opcode&0x80000000) //polling flash access 31b
-+ {
-+ opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+ //sl2312_flash_delay();
-+ schedule();
-+ }
-+
-+ opcode = FLASH_READ_REG(NFLASH_DATA);
-+ if(DWIDTH==NFLASH_WiDTH16)
-+ {
-+ id[0] = opcode&0xff;
-+ id[1] = (opcode&0xff00)>>8;
-+ }
-+ else
-+ {
-+ id[0] = opcode&0xff;
-+ opcode = 0x80002000|DWIDTH|CHIP_EN;//|chip0_en; //set start bit & 8bits read command
-+ FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+ opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+ while(opcode&0x80000000) //polling flash access 31b
-+ {
-+ opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+ //sl2312_flash_delay();
-+ schedule();
-+ }
-+ opcode = FLASH_READ_REG(NFLASH_DATA);
-+ id[1] = (opcode&0xff00)>>8;
-+
-+ opcode=FLASH_READ_REG(NFLASH_TYPE);
-+ if((opcode&0x300)>0x100)
-+ {
-+ for(i=0;i<2;i++)
-+ {
-+ //data cycle 3 & 4 ->not use
-+ opcode = 0x80002000|DWIDTH|CHIP_EN;//set start bit & 8bits read command
-+ FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+ opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+ while(opcode&0x80000000) //polling flash access 31b
-+ {
-+ opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+ //sl2312_flash_delay();
-+ schedule();
-+ }
-+
-+ opcode=FLASH_READ_REG(NFLASH_DATA);
-+ id[2+i] = (opcode&(0xff0000<<i*8))>>(8*(2+i));
-+ }
-+ }
-+ }
-+ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+}
-+
-+/*
-+ * NAND erase a block
-+ */
-+static int sl2312_nand_erase (struct mtd_info *mtd, struct erase_info *instr, int allowbbt)
-+{
-+ int page, len, status, pages_per_block, ret, chipnr;
-+ struct nand_chip *this = mtd->priv;
-+
-+ DEBUG (MTD_DEBUG_LEVEL3,
-+ "nand_erase: start = 0x%08x, len = %i\n", (unsigned int) instr->addr, (unsigned int) instr->len);
-+
-+ /* Start address must align on block boundary */
-+ if (instr->addr & ((1 << this->phys_erase_shift) - 1)) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n");
-+ return -EINVAL;
-+ }
-+
-+ /* Length must align on block boundary */
-+ if (instr->len & ((1 << this->phys_erase_shift) - 1)) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Length not block aligned\n");
-+ return -EINVAL;
-+ }
-+
-+ /* Do not allow erase past end of device */
-+ if ((instr->len + instr->addr) > mtd->size) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Erase past end of device\n");
-+ return -EINVAL;
-+ }
-+
-+ instr->fail_addr = 0xffffffff;
-+
-+ /* Grab the lock and see if the device is available */
-+ sl2312_nand_get_chip (this, mtd, FL_ERASING, NULL);
-+
-+ /* Shift to get first page */
-+ page = (int) (instr->addr >> this->page_shift);
-+ chipnr = (int) (instr->addr >> this->chip_shift);
-+
-+ /* Calculate pages in each block */
-+ pages_per_block = 1 << (this->phys_erase_shift - this->page_shift);
-+
-+ /* Select the NAND device */
-+ //this->select_chip(mtd, chipnr);
-+ this->select_chip(mtd, 0);
-+
-+ /* Check the WP bit */
-+ /* Check, if it is write protected */
-+ status = sl2312_device_ready(mtd);
-+ if (!(status & 0x80)) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Device is write protected!!!\n");
-+ instr->state = MTD_ERASE_FAILED;
-+ goto erase_exit;
-+ }
-+
-+ /* Loop through the pages */
-+ len = instr->len;
-+
-+ instr->state = MTD_ERASING;
-+
-+ while (len) {
-+ /* Check if we have a bad block, we do not erase bad blocks ! */
-+ if (this->block_bad(mtd, ((loff_t) page) << this->page_shift, 0)) {
-+ printk (KERN_WARNING "nand_erase: attempt to erase a bad block at page 0x%08x\n", page);
-+ //instr->state = MTD_ERASE_FAILED;
-+ //goto erase_exit;
-+ }
-+
-+ /* Invalidate the page cache, if we erase the block which contains
-+ the current cached page */
-+ if (page <= this->pagebuf && this->pagebuf < (page + pages_per_block))
-+ this->pagebuf = -1;
-+ /////////
-+
-+ ///* Send commands to erase a page */
-+ //FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
-+ //
-+ //if(mtd->oobblock > 528)
-+ // FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff21); // 3 address & 2 command
-+ //else
-+ // FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff11); // 2 address & 2 command
-+ //
-+ //FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x0000d060); // write read id command
-+ //FLASH_WRITE_REG(NFLASH_ADDRESS, page); //write address 0x00
-+ //
-+ //
-+ //
-+ ///* read maker code */
-+ //opcode = 0x80003000|DWIDTH|CHIP_EN; //set start bit & 8bits write command
-+ //FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+ //
-+ //while(opcode&0x80000000) //polling flash access 31b
-+ //{
-+ // opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+ // //sl2312_flash_delay();
-+ // schedule();
-+ // //cond_resched();
-+ //}
-+ sl2312_nand_erase_block(mtd, page);
-+ //////////////
-+ status = this->waitfunc (mtd, this, FL_ERASING);
-+ /* See if block erase succeeded */
-+ if (status & 0x01) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: " "Failed erase, page 0x%08x\n", page);
-+ instr->state = MTD_ERASE_FAILED;
-+ instr->fail_addr = (page << this->page_shift);
-+ goto erase_exit;
-+ }
-+
-+ /* Increment page address and decrement length */
-+ len -= (1 << this->phys_erase_shift);
-+ page += pages_per_block;
-+
-+ /* Check, if we cross a chip boundary */
-+ if (len && !(page & this->pagemask)) {
-+ chipnr++;
-+ this->select_chip(mtd, 0);
-+ this->select_chip(mtd, 0);
-+ }
-+ //sl2312_flash_delay();
-+ schedule();
-+ //cond_resched();
-+ }
-+ instr->state = MTD_ERASE_DONE;
-+
-+erase_exit:
-+ /* De-select the NAND device */
-+ this->select_chip(mtd, 0);
-+ spin_unlock_bh (&this->chip_lock);
-+
-+ ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;;
-+ /* Do call back function */
-+ if (!ret && instr->callback)
-+ instr->callback (instr);
-+
-+ /* The device is ready */
-+ spin_lock_bh (&this->chip_lock);
-+ this->state = FL_READY;
-+ spin_unlock_bh (&this->chip_lock);
-+ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+ /* Return more or less happy */
-+ return ret;
-+}
-+
-+static void sl2312_nand_select_chip(struct mtd_info *mtd, int chip)
-+{
-+ //struct nand_chip *this = mtd->priv;
-+
-+ switch(chip) {
-+ case -1:
-+ CHIP_EN = NFLASH_CHIP0_EN;
-+ break;
-+ case 0:
-+ CHIP_EN = NFLASH_CHIP0_EN;
-+ break;
-+ case 1:
-+ CHIP_EN = NFLASH_CHIP1_EN;
-+ break;
-+ default:
-+ CHIP_EN = NFLASH_CHIP0_EN;
-+ break;
-+ }
-+}
-+
-+/**
-+ * nand_default_block_markbad - [DEFAULT] mark a block bad
-+ * @mtd: MTD device structure
-+ * @ofs: offset from device start
-+ *
-+ * This is the default implementation, which can be overridden by
-+ * a hardware specific driver.
-+*/
-+static int sl2312_nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ u_char buf[2] = {0, 0};
-+ size_t retlen;
-+ int block;
-+
-+ /* Get block number */
-+ block = ((int) ofs) >> this->bbt_erase_shift;
-+ this->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
-+
-+ /* Do we have a flash based bad block table ? */
-+ if (this->options & NAND_USE_FLASH_BBT)
-+ return nand_update_bbt (mtd, ofs);
-+
-+ /* We write two bytes, so we dont have to mess with 16 bit access */
-+ ofs += mtd->oobsize + (this->badblockpos & ~0x01);
-+ return sl2312_nand_write_oob (mtd, ofs , 2, &retlen, buf);
-+}
-+
-+/* Appropriate chip should already be selected */
-+static int sl2312_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)//(struct mtd_info *mtd, unsigned long page, )
-+{
-+ u_char *buf, *oobbuf;
-+ size_t retlen;
-+ unsigned long page, chipnr;
-+ struct nand_chip *this = mtd->priv;
-+
-+ if (getchip) {
-+ page = (int)(ofs >> this->page_shift);
-+ chipnr = (int)(ofs >> this->chip_shift);
-+
-+ /* Grab the lock and see if the device is available */
-+ sl2312_nand_get_chip (this, mtd, FL_READING, NULL);
-+ /* Select the NAND device */
-+ this->select_chip(mtd, chipnr);
-+ } else
-+ page = (int) ofs;
-+
-+ buf = kmalloc (mtd->oobblock,GFP_KERNEL);
-+ oobbuf = kmalloc (mtd->oobsize,GFP_KERNEL);
-+
-+ if ((!buf)||(!oobbuf)) {
-+ printk ("sl2312_nand_block_bad : Unable to allocate SL2312 NAND MTD device structure.\n");
-+
-+ }
-+
-+ sl2312_nand_read_ecc (mtd, page, mtd->oobblock , &retlen, buf, oobbuf, NULL);
-+
-+
-+ if(((mtd->oobblock < 528)&&(oobbuf[5] != 0xff))||((mtd->oobblock > 528)&&(oobbuf[0] != 0xff)))
-+ {
-+ kfree(buf);
-+ kfree(oobbuf);
-+ return 1;
-+ }
-+
-+ kfree(buf);
-+ kfree(oobbuf);
-+ return 0;
-+}
-+
-+/*
-+* Use NAND read ECC
-+*/
-+static int sl2312_nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
-+{
-+ return sl2312_nand_read_ecc (mtd, from, len, retlen, buf, NULL, NULL);
-+}
-+
-+/*
-+ * NAND read with ECC
-+ */
-+static int sl2312_nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
-+ size_t * retlen, u_char * buf, u_char * oob_buf, struct nand_oobinfo *oobsel)
-+{
-+ int j, col, page, opcode, i;
-+ int end=0;//, ecc=0;//, end_page=0;
-+ int erase_state = 0;
-+ int read = 0, oob = 0, ecc_failed = 0;//, ecc_status = 0
-+ struct nand_chip *this = mtd->priv;
-+ u_char *data_poi, *oob_data = oob_buf;
-+ //u_char ecc_calc[6];
-+ //u_char ecc_code[6];
-+ int eccmode;
-+ int *oob_config;
-+
-+
-+
-+ // use chip default if zero
-+ if (oobsel == NULL)
-+ oobsel = &mtd->oobinfo;
-+
-+ eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
-+ oob_config = oobsel->eccpos;
-+
-+ DEBUG (MTD_DEBUG_LEVEL3, "nand_read_ecc: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
-+
-+ /* Do not allow reads past end of device */
-+ if ((from + len) > mtd->size) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: Attempt read beyond end of device\n");
-+ *retlen = 0;
-+ return -EINVAL;
-+ }
-+
-+ /* Grab the lock and see if the device is available */
-+ sl2312_nand_get_chip (this, mtd ,FL_READING, &erase_state);
-+
-+ /* Select the NAND device */
-+ this->select_chip(mtd, 0);
-+
-+ /* First we calculate the starting page */
-+ page = from >> this->page_shift;
-+
-+ //end_page = mtd->oobblock + mtd->oobsize;
-+ end = mtd->oobblock;
-+ //ecc = mtd->eccsize;
-+ /* Get raw starting column */
-+ col = (from & (mtd->oobblock - 1));
-+
-+
-+ /* Send the read command */
-+ //this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page);
-+
-+ /* Loop until all data read */
-+ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+ while (read < len) {
-+
-+ //udelay(1200);
-+ /* If we have consequent page reads, apply delay or wait for ready/busy pin */
-+ if (read) {
-+ if (!this->dev_ready)
-+ udelay (this->chip_delay);
-+ else
-+ while (!this->dev_ready(mtd));
-+ }
-+
-+ /*
-+ * If the read is not page aligned, we have to read into data buffer
-+ * due to ecc, else we read into return buffer direct
-+ */
-+ if (!col && (len - read) >= end)
-+ data_poi = &buf[read];
-+ else
-+ data_poi = this->data_buf;
-+
-+ /* get oob area, if we have no oob buffer from fs-driver */
-+ if (!oob_buf) {
-+ oob_data = &this->data_buf[end];
-+ oob = 0;
-+ }
-+
-+ j = 0;
-+ switch (eccmode) {
-+ case NAND_ECC_NONE: { /* No ECC, Read in a page */
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
-+ break;
-+ }
-+
-+ case NAND_ECC_SOFT: /* Software ECC 3/256: Read in a page + oob data */
-+ break;
-+
-+ case NAND_ECC_HW3_256: /* Hardware ECC 3 byte /256 byte data: Read in first 256 byte, get ecc, */
-+ break;
-+
-+ case NAND_ECC_HW3_512:
-+ case NAND_ECC_HW6_512: /* Hardware ECC 3/6 byte / 512 byte data : Read in a page */
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x80000001); //set 31b = 0
-+ break;
-+
-+ default:
-+ printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0);
-+ //BUG();
-+ }//end switch
-+
-+ for(i=0;i<end;i++)
-+ {
-+ //udelay(7);
-+ data_poi[i] = FLASH_READ_DATA(page*mtd->oobblock +i);
-+ }
-+ /* read oobdata */
-+ for (i = 0; i < mtd->oobsize; i++)
-+ {
-+ //udelay(7);
-+ oob_data[oob + i] = FLASH_READ_DATA(page*mtd->oobblock +end+i);
-+ }
-+
-+ /* Skip ECC, if not active */
-+ if (eccmode == NAND_ECC_NONE)
-+ goto readdata;
-+
-+ // compare ecc and correct data
-+
-+ opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
-+ while(!(opcode&0x80000000)) //polling flash access 31b
-+ {
-+ opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
-+ //sl2312_flash_delay();
-+ schedule();
-+ }
-+ for(j=0;j<(end/512);j++)
-+ {//for 2k page
-+
-+ opcode = 0x00000000|oob_data[mtd->oobsize-3-4*j]<<16|oob_data[mtd->oobsize-2-4*j]<<8|oob_data[mtd->oobsize-1-4*j];
-+
-+ //opcode=FLASH_READ_REG(NFLASH_ECC_CODE_GEN0+(j*4));
-+
-+ FLASH_WRITE_REG(NFLASH_ECC_OOB, opcode);
-+ opcode = 0x00000000|(j<<8); //select ECC code generation 0
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, opcode); //???
-+
-+ opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
-+ if((opcode&0x00000003)==0x03)
-+ {
-+ printk (KERN_WARNING "\nPageRead Uncorrectable error !!\n");
-+ ecc_failed++;
-+ }
-+ else if((opcode&0x00000003)==0x01)
-+ {
-+ printk (KERN_WARNING "\nPageRead One bit data error !!");
-+ // correct data
-+ if((data_poi[(opcode&0xff80)>>7]>>((opcode&0x38)>>3))%1)
-+ data_poi[(opcode&0xff80)>>7] &= ~(1<<((opcode&0x38)>>3));
-+ else
-+ data_poi[(opcode&0xff80)>>7] |= (1<<((opcode&0x38)>>3));
-+
-+ }
-+ else if((opcode&0x00000003)==0x02)
-+ {
-+ printk (KERN_WARNING "\nPageRead One bit ECC error !!\n");
-+ }
-+ else if((opcode&0x00000003)==0x00)
-+ {
-+
-+ }
-+
-+ }//for 2k page
-+readdata:
-+ if (col || (len - read) < end) {
-+ for (j = col; j < end && read < len; j++)
-+ buf[read++] = data_poi[j];
-+ } else
-+ read += mtd->oobblock;
-+ /* For subsequent reads align to page boundary. */
-+ col = 0;
-+ /* Increment page address */
-+ page++;
-+ schedule();
-+ }
-+ /* De-select the NAND device */
-+ //this->select_chip(mtd, -1);
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
-+ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_INDIRECT);
-+ /* Wake up anyone waiting on the device */
-+ spin_lock_bh (&this->chip_lock);
-+ this->state = FL_READY;
-+ wake_up (&this->wq);
-+ spin_unlock_bh (&this->chip_lock);
-+
-+ /*
-+ * Return success, if no ECC failures, else -EIO
-+ * fs driver will take care of that, because
-+ * retlen == desired len and result == -EIO
-+ */
-+ *retlen = read;
-+ return ecc_failed ? -EIO : 0;
-+}
-+
-+/*
-+ * Wait for command done. This applies to erase and program only
-+ * Erase can take up to 400ms and program up to 20ms according to
-+ * general NAND and SmartMedia specs
-+ *
-+*/
-+static int sl2312_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this, int state)
-+{
-+ unsigned long timeo = jiffies;
-+ int status, opcode;
-+
-+ if (state == FL_ERASING)
-+ timeo += (HZ * 400) / 1000;
-+ else
-+ timeo += (HZ * 20) / 1000;
-+
-+ spin_lock_bh (&this->chip_lock);
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
-+ FLASH_WRITE_REG(NFLASH_COUNT, 0x007f000070); //set only command no address and two data
-+
-+ FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x00000070); //write read status command
-+
-+
-+ opcode = 0x80002000|DWIDTH|CHIP_EN; //set start bit & 8bits read command
-+ FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+
-+ while(opcode&0x80000000) //polling flash access 31b
-+ {
-+ opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+ //sl2312_flash_delay();
-+ schedule();
-+ }
-+
-+ while (time_before(jiffies, timeo)) {
-+ /* Check, if we were interrupted */
-+ if (this->state != state) {
-+ spin_unlock_bh (&this->chip_lock);
-+ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+ return 0;
-+ }
-+ if (this->dev_ready) {
-+ if (this->dev_ready(mtd))
-+ break;
-+ }
-+ if (FLASH_READ_REG(NFLASH_DATA) & 0x40)
-+ break;
-+
-+ spin_unlock_bh (&this->chip_lock);
-+ yield ();
-+ spin_lock_bh (&this->chip_lock);
-+ }
-+ status = FLASH_READ_REG(NFLASH_DATA)&0xff;
-+ spin_unlock_bh (&this->chip_lock);
-+ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+ return status;
-+}
-+
-+static int sl2312_nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
-+{
-+ int i, col, page, j=0;
-+ //int erase_state = 0;
-+ struct nand_chip *this = mtd->priv;
-+ u_char *databuf, *oobbuf;
-+
-+ databuf = &this->data_buf[0];
-+ oobbuf = &this->data_buf[mtd->oobblock];
-+ for (i = 0; i < mtd->oobsize; i++)
-+ oobbuf[i] = 0xff;
-+
-+ DEBUG (MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
-+
-+ /* Shift to get page */
-+ page = ((int) from) >> this->page_shift;
-+
-+ /* Mask to get column */
-+ col = from & (mtd->oobsize-1); //0x0f;
-+
-+ /* Initialize return length value */
-+ *retlen = 0;
-+ sl2312_nand_read_ecc (mtd, page, mtd->oobblock , retlen, databuf, oobbuf, NULL);
-+ for(i=col,j=0;i<mtd->oobsize||i<(col+len);i++,j++)
-+ buf[j] = oobbuf[i];
-+
-+ *retlen = j ;
-+ return 0;
-+}
-+
-+#define NOTALIGNED(x) (x & (mtd->oobblock-1)) != 0
-+/*
-+* Use NAND write ECC
-+*/
-+static int sl2312_nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf)
-+{
-+ return (sl2312_nand_write_ecc (mtd, to, len, retlen, buf, NULL, NULL));
-+}
-+
-+/*
-+ * NAND write with ECC
-+ */
-+static int sl2312_nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
-+ size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel)
-+{
-+ int page, ret = 0, oob = 0, written = 0;
-+ struct nand_chip *this = mtd->priv;
-+
-+ DEBUG (MTD_DEBUG_LEVEL3, "nand_write_ecc: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
-+
-+
-+ /* Do not allow write past end of device */
-+ if ((to + len) > mtd->size) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Attempt to write past end of page\n");
-+ return -EINVAL;
-+ }
-+
-+ /* reject writes, which are not page aligned */
-+ if (NOTALIGNED (to) || NOTALIGNED(len)) {
-+ printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
-+ return -EINVAL;
-+ }
-+
-+ // if oobsel is NULL, use chip defaults
-+ if (oobsel == NULL)
-+ oobsel = &mtd->oobinfo;
-+
-+ /* Shift to get page */
-+ page = ((int) to) >> this->page_shift;
-+
-+ /* Grab the lock and see if the device is available */
-+ sl2312_nand_get_chip (this, mtd, FL_WRITING, NULL);
-+
-+ /* Select the NAND device */
-+ this->select_chip(mtd, 0);
-+
-+ /* Check the WP bit */
-+ if (!(sl2312_device_ready(mtd) & 0x80)) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Device is write protected!!!\n");
-+ ret = -EIO;
-+ goto out;
-+ }
-+
-+ /* Loop until all data is written */
-+ while (written < len) {
-+ //udelay(100);
-+ int cnt = mtd->oobblock;
-+ this->data_poi = (u_char*) &buf[written];
-+ /* We use the same function for write and writev */
-+ if (eccbuf) {
-+ ret = sl2312_nand_write_page (mtd, this, page, &eccbuf[oob], oobsel);
-+ oob += mtd->oobsize;
-+ } else
-+ ret = sl2312_nand_write_page (mtd, this, page, NULL, oobsel);
-+
-+ if (ret)
-+ goto out;
-+
-+ /* Update written bytes count */
-+ written += cnt;
-+ /* Increment page address */
-+ page++;
-+ }
-+
-+out:
-+ /* De-select the NAND device */
-+ //this->select_chip(mtd, -1);
-+
-+ /* Wake up anyone waiting on the device */
-+ spin_lock_bh (&this->chip_lock);
-+ this->state = FL_READY;
-+ wake_up (&this->wq);
-+ spin_unlock_bh (&this->chip_lock);
-+
-+ *retlen = written;
-+ return ret;
-+}
-+
-+/*
-+ * Nand_page_program function is used for write and writev !
-+ * This function will always program a full page of data
-+ * If you call it with a non page aligned buffer, you're lost :)
-+ */
-+static int sl2312_nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf, struct nand_oobinfo *oobsel)
-+{
-+ int i, j, status, opcode;
-+ u_char ecc_code[16], *oob_data;
-+ int eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
-+ //int *oob_config = oobsel->eccpos;
-+
-+ /* pad oob area, if we have no oob buffer from fs-driver */
-+ if (!oob_buf) {
-+ oob_data = &this->data_buf[mtd->oobblock];
-+ for (i = 0; i < mtd->oobsize; i++)
-+ oob_data[i] = 0xff;
-+ } else
-+ oob_data = oob_buf;
-+
-+ /* Send command to begin auto page programming */
-+
-+ memset(oob_data,0xff,mtd->oobsize);
-+ /* Write out complete page of data, take care of eccmode */
-+ switch (eccmode) {
-+ /* No ecc and software ecc 3/256, write all */
-+ case NAND_ECC_NONE:
-+ printk (KERN_WARNING "Writing data without ECC to NAND-FLASH is not recommended\n");
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
-+ break;
-+ case NAND_ECC_SOFT:
-+ break;
-+
-+ /* Hardware ecc 3 byte / 256 data, write first half, get ecc, then second, if 512 byte pagesize */
-+ case NAND_ECC_HW3_256:
-+ break;
-+
-+ /* Hardware ecc 3 byte / 512 byte data, write full page */
-+ case NAND_ECC_HW3_512:
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x80000001); //set 31b = 0
-+
-+ /* Hardware ecc 6 byte / 512 byte data, write full page */
-+ case NAND_ECC_HW6_512:
-+ break;
-+
-+ default:
-+ printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
-+ //BUG();
-+ }
-+
-+ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+
-+ for(i=0;i<mtd->oobblock;i++)
-+ {
-+ //udelay(5);
-+ FLASH_WRITE_DATA((page*mtd->oobblock)+i,this->data_poi[i]);
-+ }
-+ ///////////////
-+ if(eccmode!=NAND_ECC_NONE)
-+ {
-+ opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
-+ while(!(opcode&0x80000000)) //polling flash access 31b
-+ {
-+ opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
-+ //sl2312_flash_delay();
-+ schedule();
-+ }
-+
-+
-+ for(i=0;i<(mtd->oobblock/512);i++)
-+ {
-+ opcode=FLASH_READ_REG(NFLASH_ECC_CODE_GEN0+(i*4));
-+
-+ for(j=3;j>0;j--)
-+ oob_data[(mtd->oobsize-j-(i*4))] = (opcode<<((4-j)*8)) >>24;
-+
-+ for(j=0;j<4;j++)
-+ {
-+ ecc_code[15-i*4] = opcode;
-+ ecc_code[15-i*4-1] = opcode>>8;
-+ ecc_code[15-i*4-2] = opcode>>16;
-+ }
-+ }
-+
-+ //disable ecc
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000);
-+
-+ /* Write out OOB data */
-+ for(i=0;i<mtd->oobsize;i++)
-+ {
-+ //udelay(5);
-+ FLASH_WRITE_DATA((page*mtd->oobblock)+mtd->oobblock+i,oob_data[i]);
-+ }
-+ }
-+ else
-+ {
-+ for(i=0;i<mtd->oobsize;i++)
-+ {
-+ //udelay(5);
-+ FLASH_WRITE_DATA((page*mtd->oobblock)+mtd->oobblock+i,0xff);
-+ }
-+ }
-+
-+
-+ /* call wait ready function */
-+ status = this->waitfunc (mtd, this, FL_WRITING);
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
-+ /* See if device thinks it succeeded */
-+ if (status & 0x01) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write, page 0x%08x, ", __FUNCTION__, page);
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
-+ return -EIO;
-+ }
-+
-+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
-+ /*
-+ * The NAND device assumes that it is always writing to
-+ * a cleanly erased page. Hence, it performs its internal
-+ * write verification only on bits that transitioned from
-+ * 1 to 0. The device does NOT verify the whole page on a
-+ * byte by byte basis. It is possible that the page was
-+ * not completely erased or the page is becoming unusable
-+ * due to wear. The read with ECC would catch the error
-+ * later when the ECC page check fails, but we would rather
-+ * catch it early in the page write stage. Better to write
-+ * no data than invalid data.
-+ */
-+
-+ /* Send command to read back the page */
-+ this->cmdfunc (mtd, NAND_CMD_READ0, 0, page);
-+ /* Loop through and verify the data */
-+ if (this->verify_buf(mtd, this->data_poi, mtd->oobblock)) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
-+ return -EIO;
-+ }
-+
-+ /* check, if we have a fs-supplied oob-buffer */
-+ if (oob_buf) {
-+ if (this->verify_buf(mtd, oob_data, mtd->oobsize)) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
-+ return -EIO;
-+ }
-+ } else {
-+ if (eccmode != NAND_ECC_NONE) {
-+ int ecc_bytes = 0;
-+
-+ switch (this->eccmode) {
-+ case NAND_ECC_SOFT:
-+ case NAND_ECC_HW3_256: ecc_bytes = (mtd->oobblock == 512) ? 6 : 3; break;
-+ case NAND_ECC_HW3_512: ecc_bytes = 3; break;
-+ case NAND_ECC_HW6_512: ecc_bytes = 6; break;
-+ }
-+
-+
-+
-+ for(i=0;i < (mtd->oobblock+mtd->oobsize);i++)
-+ {
-+ if(i>=mtd->oobblock)
-+ oob_data[i-mtd->oobblock] = FLASH_READ_DATA((page*mtd->oobblock) +i);
-+ else
-+ oob_data[0] = FLASH_READ_DATA((page*mtd->oobblock) +i);
-+ }
-+
-+ if(this->eccmode == NAND_ECC_HW3_512)
-+ {
-+ for(i=0;i<(mtd->oobblock/512);i++)
-+ {
-+ for(j=0;j<3;j++)
-+ {
-+ if (oob_data[mtd->oobsize-1-j-4*i] != ecc_code[15-j-4*i]) {
-+ DEBUG (MTD_DEBUG_LEVEL0,
-+ "%s: Failed ECC write "
-+ "verify, page 0x%08x, " "%6i bytes were succesful\n", __FUNCTION__, page, i);
-+ return -EIO;
-+ }
-+ }
-+ }
-+ }
-+ }//eccmode != NAND_ECC_NONE
-+ }
-+ /*
-+ * Terminate the read command. This is faster than sending a reset command or
-+ * applying a 20us delay before issuing the next programm sequence.
-+ * This is not a problem for all chips, but I have found a bunch of them.
-+ */
-+ //this->select_chip(mtd, -1);
-+ //this->select_chip(mtd, 0);
-+#endif
-+
-+ return 0;
-+}
-+
-+/*
-+ * NAND write with iovec
-+ */
-+static int sl2312_nand_writev (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
-+ loff_t to, size_t * retlen)
-+{
-+ return (sl2312_nand_writev_ecc (mtd, vecs, count, to, retlen, NULL, 0));
-+}
-+
-+static int sl2312_nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
-+ loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel)
-+{
-+ int i, page, len, total_len, ret = 0, written = 0;
-+ struct nand_chip *this = mtd->priv;
-+
-+ /* Calculate total length of data */
-+ total_len = 0;
-+ for (i = 0; i < count; i++)
-+ total_len += (int) vecs[i].iov_len;
-+
-+ DEBUG (MTD_DEBUG_LEVEL3,
-+ "nand_writev: to = 0x%08x, len = %i, count = %ld\n", (unsigned int) to, (unsigned int) total_len, count);
-+
-+ /* Do not allow write past end of page */
-+ if ((to + total_len) > mtd->size) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_writev: Attempted write past end of device\n");
-+ return -EINVAL;
-+ }
-+
-+ /* reject writes, which are not page aligned */
-+ if (NOTALIGNED (to) || NOTALIGNED(total_len)) {
-+ printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
-+ return -EINVAL;
-+ }
-+
-+ // if oobsel is NULL, use chip defaults
-+ if (oobsel == NULL)
-+ oobsel = &mtd->oobinfo;
-+
-+ /* Shift to get page */
-+ page = ((int) to) >> this->page_shift;
-+
-+ /* Grab the lock and see if the device is available */
-+ sl2312_nand_get_chip (this, mtd, FL_WRITING, NULL);
-+
-+ /* Select the NAND device */
-+ this->select_chip(mtd, 0);
-+
-+ /* Check the WP bit */
-+ if (!(sl2312_device_ready(mtd) & 0x80)) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "sl2312_nand_writev_ecc: Device is write protected!!!\n");
-+ ret = -EIO;
-+ goto out;
-+ }
-+
-+ /* Loop until all iovecs' data has been written */
-+ len = 0;
-+ while (count) {
-+ /*
-+ * Check, if the tuple gives us not enough data for a
-+ * full page write. Then we can use the iov direct,
-+ * else we have to copy into data_buf.
-+ */
-+ if ((vecs->iov_len - len) >= mtd->oobblock) {
-+ this->data_poi = (u_char *) vecs->iov_base;
-+ this->data_poi += len;
-+ len += mtd->oobblock;
-+ /* Check, if we have to switch to the next tuple */
-+ if (len >= (int) vecs->iov_len) {
-+ vecs++;
-+ len = 0;
-+ count--;
-+ }
-+ } else {
-+ /*
-+ * Read data out of each tuple until we have a full page
-+ * to write or we've read all the tuples.
-+ */
-+ int cnt = 0;
-+ while ((cnt < mtd->oobblock) && count) {
-+ if (vecs->iov_base != NULL && vecs->iov_len) {
-+ this->data_buf[cnt++] = ((u_char *) vecs->iov_base)[len++];
-+ }
-+ /* Check, if we have to switch to the next tuple */
-+ if (len >= (int) vecs->iov_len) {
-+ vecs++;
-+ len = 0;
-+ count--;
-+ }
-+ }
-+ this->data_poi = this->data_buf;
-+ }
-+
-+ /* We use the same function for write and writev !) */
-+ ret = sl2312_nand_write_page (mtd, this, page, NULL, oobsel);
-+ if (ret)
-+ goto out;
-+
-+ /* Update written bytes count */
-+ written += mtd->oobblock;;
-+
-+ /* Increment page address */
-+ page++;
-+ }
-+
-+out:
-+ /* De-select the NAND device */
-+ //this->select_chip(mtd, -1);
-+
-+ /* Wake up anyone waiting on the device */
-+ spin_lock_bh (&this->chip_lock);
-+ this->state = FL_READY;
-+ wake_up (&this->wq);
-+ spin_unlock_bh (&this->chip_lock);
-+
-+ *retlen = written;
-+ return ret;
-+}
-+
-+/*
-+static u_char ffchars[] = {
-+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
-+};
-+*/
-+/*
-+ * NAND write out-of-band
-+ */
-+static int sl2312_nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf)
-+{
-+ int column, page, status, ret = 0, j=0;
-+ struct nand_chip *this = mtd->priv;
-+ u_char *databuf, *oobbuf;
-+
-+
-+ databuf = &this->data_buf[0];
-+ oobbuf = &this->data_buf[mtd->oobblock];
-+ for (j = 0; j < mtd->oobsize; j++)
-+ oobbuf[j] = 0xff;
-+//#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
-+// int i;
-+//#endif
-+
-+ DEBUG (MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
-+
-+ /* Shift to get page */
-+ page = ((int) to) >> this->page_shift;
-+
-+ /* Mask to get column */
-+ column = to & 0x1f;
-+
-+ /* Initialize return length value */
-+ *retlen = 0;
-+
-+ /* Do not allow write past end of page */
-+ if ((column + len) > mtd->oobsize) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: Attempt to write past end of page\n");
-+ return -EINVAL;
-+ }
-+
-+ /* Grab the lock and see if the device is available */
-+ sl2312_nand_get_chip (this, mtd, FL_WRITING, NULL);
-+
-+ /* Select the NAND device */
-+ this->select_chip(mtd, 0);
-+
-+ /* Reset the chip. Some chips (like the Toshiba TC5832DC found
-+ in one of my DiskOnChip 2000 test units) will clear the whole
-+ data page too if we don't do this. I have no clue why, but
-+ I seem to have 'fixed' it in the doc2000 driver in
-+ August 1999. dwmw2. */
-+ this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
-+
-+ /* Check the WP bit */
-+ if (!(sl2312_device_ready(mtd) & 0x80)) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: Device is write protected!!!\n");
-+ ret = -EIO;
-+ goto out;
-+ }
-+ /* Write out desired data */
-+ this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock, page);
-+
-+ sl2312_nand_read_ecc (mtd, page, mtd->oobblock , retlen, databuf, oobbuf, NULL);
-+
-+ for(j=column;j<(column+len);j++)
-+ oobbuf[j] = buf[j-column];
-+ sl2312_nand_write_ecc (mtd, page, mtd->oobblock, retlen, databuf, oobbuf, NULL);
-+
-+ status = this->waitfunc (mtd, this, FL_WRITING);
-+
-+ /* See if device thinks it succeeded */
-+ if (status & 0x01) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write, page 0x%08x\n", page);
-+ ret = -EIO;
-+ goto out;
-+ }
-+ /* Return happy */
-+ *retlen = len;
-+
-+
-+out:
-+ /* De-select the NAND device */
-+ //this->select_chip(mtd, -1);
-+
-+ /* Wake up anyone waiting on the device */
-+ spin_lock_bh (&this->chip_lock);
-+ this->state = FL_READY;
-+ wake_up (&this->wq);
-+ spin_unlock_bh (&this->chip_lock);
-+
-+ return ret;
-+}
-+
-+/*
-+ * NAND sync
-+ */
-+static void sl2312_nand_sync (struct mtd_info *mtd)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ DECLARE_WAITQUEUE (wait, current);
-+
-+ DEBUG (MTD_DEBUG_LEVEL3, "nand_sync: called\n");
-+
-+retry:
-+ /* Grab the spinlock */
-+ spin_lock_bh (&this->chip_lock);
-+
-+ /* See what's going on */
-+ switch (this->state) {
-+ case FL_READY:
-+ case FL_SYNCING:
-+ this->state = FL_SYNCING;
-+ spin_unlock_bh (&this->chip_lock);
-+ break;
-+
-+ default:
-+ /* Not an idle state */
-+ add_wait_queue (&this->wq, &wait);
-+ spin_unlock_bh (&this->chip_lock);
-+ schedule ();
-+
-+ remove_wait_queue (&this->wq, &wait);
-+ goto retry;
-+ }
-+
-+ /* Lock the device */
-+ spin_lock_bh (&this->chip_lock);
-+
-+ /* Set the device to be ready again */
-+ if (this->state == FL_SYNCING) {
-+ this->state = FL_READY;
-+ wake_up (&this->wq);
-+ }
-+
-+ /* Unlock the device */
-+ spin_unlock_bh (&this->chip_lock);
-+}
-+
-+
-+/*
-+ * Scan for the NAND device
-+ */
-+int sl2312_nand_scan (struct mtd_info *mtd, int maxchips)
-+{
-+ int i, j, nand_maf_id, nand_dev_id, busw;
-+ struct nand_chip *this = mtd->priv;
-+ unsigned char id[4];
-+
-+ /* Get buswidth to select the correct functions*/
-+ busw = this->options & NAND_BUSWIDTH_16;
-+
-+ /* check for proper chip_delay setup, set 20us if not */
-+ if (!this->chip_delay)
-+ this->chip_delay = 20;
-+
-+ /* check, if a user supplied command function given */
-+ if (this->cmdfunc == NULL)
-+ this->cmdfunc = sl2312_nand_command;
-+
-+ /* check, if a user supplied wait function given */
-+ if (this->waitfunc == NULL)
-+ this->waitfunc = sl2312_nand_waitfunc;
-+
-+ if (!this->select_chip)
-+ this->select_chip = sl2312_nand_select_chip;
-+ if (!this->write_byte)
-+ this->write_byte = sl2312_nand_write_byte; //busw ? nand_write_byte16 : nand_write_byte;
-+ if (!this->read_byte)
-+ this->read_byte = sl2312_nand_read_byte; //busw ? nand_read_byte16 : nand_read_byte;
-+// if (!this->write_word)
-+// this->write_word = nand_write_word;
-+// if (!this->read_word)
-+// this->read_word = nand_read_word;
-+// if (!this->block_bad)
-+ this->block_bad = sl2312_nand_block_bad; //nand_block_bad;
-+ if (!this->block_markbad)
-+ this->block_markbad = sl2312_nand_default_block_markbad;
-+ if (!this->write_buf)
-+ this->write_buf = sl2312_nand_write_buf; //busw ? nand_write_buf16 : nand_write_buf;
-+ if (!this->read_buf)
-+ this->read_buf = sl2312_nand_read_buf; //busw ? nand_read_buf16 : nand_read_buf;
-+ if (!this->verify_buf)
-+ this->verify_buf = sl2312_nand_verify_buf; //busw ? nand_verify_buf16 : nand_verify_buf;
-+ if (!this->scan_bbt)
-+ this->scan_bbt = sl2312_nand_scan_bbt;
-+
-+ /* Select the device */
-+ this->select_chip(mtd, 0);
-+
-+ /* Read manufacturer and device IDs */
-+ nand_read_id(0,id);
-+
-+ nand_maf_id = id[0];
-+ nand_dev_id = id[1];
-+
-+ /* Print and store flash device information */
-+ for (i = 0; nand_flash_ids[i].name != NULL; i++) {
-+
-+ if (nand_dev_id != nand_flash_ids[i].id)
-+ continue;
-+
-+ if (!mtd->name) mtd->name = nand_flash_ids[i].name;
-+ this->chipsize = nand_flash_ids[i].chipsize << 20;
-+
-+ /* New devices have all the information in additional id bytes */
-+ if (!nand_flash_ids[i].pagesize) {
-+ int extid;
-+
-+ /* The 4th id byte is the important one */
-+ extid = id[3];
-+ /* Calc pagesize */
-+ mtd->oobblock = 1024 << (extid & 0x3);
-+ extid >>= 2;
-+ /* Calc oobsize */
-+ mtd->oobsize = (8 << (extid & 0x03)) * (mtd->oobblock / 512);
-+ extid >>= 2;
-+ /* Calc blocksize. Blocksize is multiples of 64KiB */
-+ mtd->erasesize = (64 * 1024) << (extid & 0x03);
-+ extid >>= 2;
-+ /* Get buswidth information */
-+ busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
-+
-+ } else {
-+ /* Old devices have this data hardcoded in the
-+ * device id table */
-+ mtd->erasesize = nand_flash_ids[i].erasesize;
-+ mtd->oobblock = nand_flash_ids[i].pagesize;
-+ mtd->oobsize = mtd->oobblock / 32;
-+ busw = nand_flash_ids[i].options & NAND_BUSWIDTH_16;
-+ }
-+
-+ /* Check, if buswidth is correct. Hardware drivers should set
-+ * this correct ! */
-+ if (busw != (this->options & NAND_BUSWIDTH_16)) {
-+ printk (KERN_INFO "NAND device: Manufacturer ID:"
-+ " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id,
-+ nand_manuf_ids[i].name , mtd->name);
-+ printk (KERN_WARNING
-+ "NAND bus width %d instead %d bit\n",
-+ (this->options & NAND_BUSWIDTH_16) ? 16 : 8,
-+ busw ? 16 : 8);
-+ this->select_chip(mtd, -1);
-+ return 1;
-+ }
-+
-+ /* Calculate the address shift from the page size */
-+ this->page_shift = ffs(mtd->oobblock) - 1;
-+ this->bbt_erase_shift = this->phys_erase_shift = ffs(mtd->erasesize) - 1;
-+ this->chip_shift = ffs(this->chipsize) - 1;
-+
-+ /* Set the bad block position */
-+ this->badblockpos = mtd->oobblock > 512 ?
-+ NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS;
-+
-+ /* Get chip options, preserve non chip based options */
-+ this->options &= ~NAND_CHIPOPTIONS_MSK;
-+ this->options |= nand_flash_ids[i].options & NAND_CHIPOPTIONS_MSK;
-+ /* Set this as a default. Board drivers can override it, if neccecary */
-+ this->options |= NAND_NO_AUTOINCR;
-+ /* Check if this is a not a samsung device. Do not clear the options
-+ * for chips which are not having an extended id.
-+ */
-+ if (nand_maf_id != NAND_MFR_SAMSUNG && !nand_flash_ids[i].pagesize)
-+ this->options &= ~NAND_SAMSUNG_LP_OPTIONS;
-+
-+ /* Check for AND chips with 4 page planes */
-+ // if (this->options & NAND_4PAGE_ARRAY)
-+ // this->erase_cmd = multi_erase_cmd;
-+ // else
-+ // this->erase_cmd = single_erase_cmd;
-+
-+ /* Do not replace user supplied command function ! */
-+ // if (mtd->oobblock > 512 && this->cmdfunc == nand_command)
-+ // this->cmdfunc = nand_command_lp;
-+
-+ /* Try to identify manufacturer */
-+ for (j = 0; nand_manuf_ids[j].id != 0x0; j++) {
-+ if (nand_manuf_ids[j].id == nand_maf_id)
-+ break;
-+ }
-+ printk (KERN_INFO "NAND device: Manufacturer ID:"
-+ " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id,
-+ nand_manuf_ids[j].name , nand_flash_ids[i].name);
-+ break;
-+ }
-+ /////////////////////////////
-+
-+ for (i=1; i < maxchips; i++) {
-+ this->select_chip(mtd, i);
-+
-+ /* Send the command for reading device ID */
-+ nand_read_id(1,id);
-+
-+ /* Read manufacturer and device IDs */
-+ if (nand_maf_id != id[0] ||
-+ nand_dev_id != id[1])
-+ break;
-+ }
-+ if (i > 1)
-+ printk(KERN_INFO "%d NAND chips detected\n", i);
-+
-+ /* Allocate buffers, if neccecary */
-+ if (!this->oob_buf) {
-+ size_t len;
-+ len = mtd->oobsize << (this->phys_erase_shift - this->page_shift);
-+ this->oob_buf = kmalloc (len, GFP_KERNEL);
-+ if (!this->oob_buf) {
-+ printk (KERN_ERR "nand_scan(): Cannot allocate oob_buf\n");
-+ return -ENOMEM;
-+ }
-+ this->options |= NAND_OOBBUF_ALLOC;
-+ }
-+
-+ if (!this->data_buf) {
-+ size_t len;
-+ len = mtd->oobblock + mtd->oobsize;
-+ this->data_buf = kmalloc (len, GFP_KERNEL);
-+ if (!this->data_buf) {
-+ if (this->options & NAND_OOBBUF_ALLOC)
-+ kfree (this->oob_buf);
-+ printk (KERN_ERR "nand_scan(): Cannot allocate data_buf\n");
-+ return -ENOMEM;
-+ }
-+ this->options |= NAND_DATABUF_ALLOC;
-+ }
-+
-+ /* Store the number of chips and calc total size for mtd */
-+ this->numchips = i;
-+ mtd->size = i * this->chipsize;
-+ /* Convert chipsize to number of pages per chip -1. */
-+ this->pagemask = (this->chipsize >> this->page_shift) - 1;
-+ /* Preset the internal oob buffer */
-+ memset(this->oob_buf, 0xff, mtd->oobsize << (this->phys_erase_shift - this->page_shift));
-+
-+ /* If no default placement scheme is given, select an
-+ * appropriate one */
-+ if (!this->autooob) {
-+ /* Select the appropriate default oob placement scheme for
-+ * placement agnostic filesystems */
-+ switch (mtd->oobsize) {
-+ case 8:
-+ this->autooob = &nand_oob_8;
-+ break;
-+ case 16:
-+ this->autooob = &nand_oob_16;
-+ break;
-+ case 64:
-+ this->autooob = &nand_oob_64;
-+ break;
-+ default:
-+ printk (KERN_WARNING "No oob scheme defined for oobsize %d\n",
-+ mtd->oobsize);
-+ BUG();
-+ }
-+ }
-+
-+ /* The number of bytes available for the filesystem to place fs dependend
-+ * oob data */
-+ if (this->options & NAND_BUSWIDTH_16) {
-+ mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 2);
-+ if (this->autooob->eccbytes & 0x01)
-+ mtd->oobavail--;
-+ } else
-+ mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 1);
-+
-+
-+ /*
-+ * check ECC mode, default to software
-+ * if 3byte/512byte hardware ECC is selected and we have 256 byte pagesize
-+ * fallback to software ECC
-+ */
-+ this->eccsize = 256; /* set default eccsize */
-+ this->eccbytes = 3;
-+
-+ switch (this->eccmode) {
-+ case NAND_ECC_HW12_2048:
-+ if (mtd->oobblock < 2048) {
-+ printk(KERN_WARNING "2048 byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
-+ mtd->oobblock);
-+ this->eccmode = NAND_ECC_SOFT;
-+ this->calculate_ecc = nand_calculate_ecc;
-+ this->correct_data = nand_correct_data;
-+ } else
-+ this->eccsize = 2048;
-+ break;
-+
-+ case NAND_ECC_HW3_512:
-+ case NAND_ECC_HW6_512:
-+ case NAND_ECC_HW8_512:
-+ if (mtd->oobblock == 256) {
-+ printk (KERN_WARNING "512 byte HW ECC not possible on 256 Byte pagesize, fallback to SW ECC \n");
-+ this->eccmode = NAND_ECC_SOFT;
-+ this->calculate_ecc = nand_calculate_ecc;
-+ this->correct_data = nand_correct_data;
-+ } else
-+ this->eccsize = 512; /* set eccsize to 512 */
-+ break;
-+
-+ case NAND_ECC_HW3_256:
-+ break;
-+
-+ case NAND_ECC_NONE:
-+ printk (KERN_WARNING "NAND_ECC_NONE selected by board driver. This is not recommended !!\n");
-+ this->eccmode = NAND_ECC_NONE;
-+ break;
-+
-+ case NAND_ECC_SOFT:
-+ this->calculate_ecc = nand_calculate_ecc;
-+ this->correct_data = nand_correct_data;
-+ break;
-+
-+ default:
-+ printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
-+ BUG();
-+ }
-+
-+ /* Check hardware ecc function availability and adjust number of ecc bytes per
-+ * calculation step
-+ */
-+ switch (this->eccmode) {
-+ case NAND_ECC_HW12_2048:
-+ this->eccbytes += 4;
-+ case NAND_ECC_HW8_512:
-+ this->eccbytes += 2;
-+ case NAND_ECC_HW6_512:
-+ this->eccbytes += 3;
-+// case NAND_ECC_HW3_512:
-+ case NAND_ECC_HW3_256:
-+ if (this->calculate_ecc && this->correct_data && this->enable_hwecc)
-+ break;
-+ printk (KERN_WARNING "No ECC functions supplied, Hardware ECC not possible\n");
-+ BUG();
-+ }
-+
-+ mtd->eccsize = this->eccsize;
-+
-+ /* Set the number of read / write steps for one page to ensure ECC generation */
-+ switch (this->eccmode) {
-+ case NAND_ECC_HW12_2048:
-+ this->eccsteps = mtd->oobblock / 2048;
-+ break;
-+ case NAND_ECC_HW3_512:
-+ case NAND_ECC_HW6_512:
-+ case NAND_ECC_HW8_512:
-+ this->eccsteps = mtd->oobblock / 512;
-+ break;
-+ case NAND_ECC_HW3_256:
-+ case NAND_ECC_SOFT:
-+ this->eccsteps = mtd->oobblock / 256;
-+ break;
-+
-+ case NAND_ECC_NONE:
-+ this->eccsteps = 1;
-+ break;
-+ }
-+
-+ /* Initialize state, waitqueue and spinlock */
-+ this->state = FL_READY;
-+ init_waitqueue_head (&this->wq);
-+ spin_lock_init (&this->chip_lock);
-+
-+ /* De-select the device */
-+ this->select_chip(mtd, 0);
-+
-+ /* Print warning message for no device */
-+ if (!mtd->size) {
-+ printk (KERN_WARNING "No NAND device found!!!\n");
-+ return 1;
-+ }
-+
-+ /* Fill in remaining MTD driver data */
-+ mtd->type = MTD_NANDFLASH;
-+ mtd->flags = MTD_CAP_NANDFLASH | MTD_ECC;
-+ mtd->ecctype = MTD_ECC_SW;
-+ mtd->erase = sl2312_nand_erase;
-+ mtd->point = NULL;
-+ mtd->unpoint = NULL;
-+ mtd->read = sl2312_nand_read;
-+ mtd->write = sl2312_nand_write;
-+ mtd->read_ecc = sl2312_nand_read_ecc;
-+ mtd->write_ecc = sl2312_nand_write_ecc;
-+ mtd->read_oob = sl2312_nand_read_oob;
-+ mtd->write_oob = sl2312_nand_write_oob;
-+ mtd->readv = NULL;
-+ mtd->writev = sl2312_nand_writev;
-+ mtd->writev_ecc = sl2312_nand_writev_ecc;
-+ mtd->sync = sl2312_nand_sync;
-+ mtd->lock = NULL;
-+ mtd->unlock = NULL;
-+ mtd->suspend = NULL;
-+ mtd->resume = NULL;
-+ mtd->block_isbad = sl2312_nand_block_isbad;
-+ mtd->block_markbad = sl2312_nand_block_markbad;
-+
-+ /* and make the autooob the default one */
-+ memcpy(&mtd->oobinfo, this->autooob, sizeof(mtd->oobinfo));
-+
-+ mtd->owner = THIS_MODULE;
-+
-+ /* Build bad block table */
-+ return this->scan_bbt (mtd);
-+}
-+
-+/*End Add function*/
-+
-+/*
-+ * Main initialization routine
-+ */
-+extern int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
-+
-+int __init sl2312_mtd_init (void)
-+{
-+ struct nand_chip *this;
-+ int err = 0;
-+ struct mtd_partition *parts;
-+ int nr_parts = 0;
-+ int ret, data, *base;
-+
-+ printk("NAND MTD Driver Start Init ......\n");
-+
-+ base = (unsigned int *)(IO_ADDRESS(SL2312_GLOBAL_BASE) + 0x30);
-+ data = *base;
-+ data&=0xffffffeb;
-+ data|=0x3; //disable p & s flash
-+ *base = data;
-+
-+ /* Allocate memory for MTD device structure and private data */
-+ sl2312_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
-+ if (!sl2312_mtd) {
-+ printk ("Unable to allocate SL2312 NAND MTD device structure.\n");
-+ err = -ENOMEM;
-+ goto out;
-+ }
-+
-+ // sl2312_device_setup();
-+
-+ /* io is indirect via a register so don't need to ioremap address */
-+
-+ /* Get pointer to private data */
-+ this = (struct nand_chip *) (&sl2312_mtd[1]);
-+
-+ /* Initialize structures */
-+ memset((char *) sl2312_mtd, 0, sizeof(struct mtd_info));
-+ memset((char *) this, 0, sizeof(struct nand_chip));
-+
-+ /* Link the private data with the MTD structure */
-+ sl2312_mtd->priv = this;
-+ sl2312_mtd->name = "sl2312-nand";
-+
-+ /* Set address of NAND IO lines */
-+ this->IO_ADDR_R = (void __iomem *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE+NFLASH_DATA)); //(unsigned long)&(sl2312_ndfmcptr->dtr);
-+ this->IO_ADDR_W = (void __iomem *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE+NFLASH_DATA)); //(unsigned long)&(sl2312_ndfmcptr->dtr);
-+ this->read_byte = sl2312_nand_read_byte;
-+ this->write_byte = sl2312_nand_write_byte;
-+ this->write_buf = sl2312_nand_write_buf;
-+ this->read_buf = sl2312_nand_read_buf;
-+ this->verify_buf = sl2312_nand_verify_buf;
-+ this->select_chip = sl2312_nand_select_chip;
-+ this->block_bad = sl2312_nand_block_bad;
-+ this->hwcontrol = sl2312_hwcontrol;
-+ this->dev_ready = sl2312_device_ready;
-+ this->cmdfunc = sl2312_nand_command;
-+ this->waitfunc = sl2312_nand_waitfunc;
-+ //this->calculate_ecc = sl2312_readecc;
-+ this->enable_hwecc = sl2312_enable_hwecc;
-+ this->eccmode = NAND_ECC_HW3_512;
-+ /*this->eccsize = 512; */
-+ /* 20 us command delay time */
-+ this->chip_delay = 20;
-+
-+ this->correct_data = nand_correct_data;
-+// this->scan_bbt = sl2312_nand_scan_bbt;
-+
-+ /* Allocate memory for internal data buffer */
-+ this->data_buf = kmalloc (sizeof(u_char) * (sl2312_mtd->oobblock + sl2312_mtd->oobsize), GFP_KERNEL);
-+ if (!this->data_buf) {
-+ printk ("Unable to allocate NAND data buffer.\n");
-+ err = -ENOMEM;
-+ goto out_ior;
-+ }
-+
-+ /* Scan to find existance of the device */
-+ if (sl2312_nand_scan(sl2312_mtd, 1)) {
-+ err = -ENXIO;
-+ goto out_ior;
-+ }
-+
-+ /* Register the partitions */
-+ parts = sl2312_partitions;
-+ nr_parts = sizeof(sl2312_partitions)/sizeof(*parts);
-+
-+ ret = add_mtd_partitions(sl2312_mtd, sl2312_partitions, nr_parts);
-+ /*If we got an error, free all resources.*/
-+ if (ret < 0) {
-+ del_mtd_partitions(sl2312_mtd);
-+ map_destroy(sl2312_mtd);
-+ }
-+ goto out;
-+
-+//out_buf:
-+// kfree (this->data_buf);
-+out_ior:
-+out:
-+ printk("NAND MTD Driver Init Success ......\n");
-+ return err;
-+}
-+
-+module_init(sl2312_mtd_init);
-+
-+/*
-+ * Clean up routine
-+ */
-+#ifdef MODULE
-+static void __exit sl2312_cleanup (void)
-+{
-+ struct nand_chip *this = (struct nand_chip *) &sl2312_mtd[1];
-+
-+ /* Unregister partitions */
-+ del_mtd_partitions(sl2312_mtd);
-+
-+ /* Unregister the device */
-+ del_mtd_device (sl2312_mtd);
-+
-+ /* Free internal data buffers */
-+ kfree (this->data_buf);
-+
-+ /* Free the MTD device structure */
-+ kfree (sl2312_mtd);
-+}
-+module_exit(sl2312_cleanup);
-+#endif
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Alice Hennessy <ahennessy@mvista.com>");
-+MODULE_DESCRIPTION("Glue layer for SmartMediaCard on Toshiba RBsl2312");
---- /dev/null
-+++ b/drivers/mtd/nand/sl2312-flash-nand.h
-@@ -0,0 +1,24 @@
-+#ifndef SL2312_FLASH_NAND_H
-+#define SL2312_FLASH_NAND_H
-+
-+#include <linux/wait.h>
-+#include <linux/spinlock.h>
-+
-+/*Add function*/
-+static void nand_read_id(int chip_no,unsigned char *id);
-+
-+
-+
-+#define NFLASH_WiDTH8 0x00000000
-+#define NFLASH_WiDTH16 0x00000400
-+#define NFLASH_WiDTH32 0x00000800
-+#define NFLASH_CHIP0_EN 0x00000000 // 16th bit = 0
-+#define NFLASH_CHIP1_EN 0x00010000 // 16th bit = 1
-+#define NFLASH_DIRECT 0x00004000
-+#define NFLASH_INDIRECT 0x00000000
-+
-+
-+#define DWIDTH NFLASH_WiDTH8
-+
-+
-+#endif /* SL2312_FLASH_NAND_H */
---- /dev/null
-+++ b/include/linux/mtd/kvctl.h
-@@ -0,0 +1,40 @@
-+#ifndef KVCTL_H
-+#define KVCTL_H
-+
-+#define VCTL_HEAD_SIZE 8
-+#define VCTL_ENTRY_LEN 20
-+
-+typedef struct
-+{
-+ char header[4];
-+ unsigned int entry_num;
-+} vctl_mheader;
-+
-+typedef struct
-+{
-+ char header[4];
-+ unsigned int size;
-+ unsigned int type;
-+ char majorver[4];
-+ char minorver[4];
-+ unsigned char *payload;
-+} vctl_entry;
-+
-+typedef struct
-+{
-+ unsigned char mac[6];
-+ unsigned char vlanid;
-+ unsigned char vlanmap;
-+} vlaninfo;
-+
-+#define VCT_VENDORSPEC 0
-+#define VCT_BOOTLOADER 1
-+#define VCT_KERNEL 2
-+#define VCT_VERCTL 3
-+#define VCT_CURRCONF 4
-+#define VCT_DEFAULTCONF 5
-+#define VCT_ROOTFS 6
-+#define VCT_APP 7
-+#define VCT_VLAN 8
-+
-+#endif
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -71,3 +71,7 @@ obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o
- obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
- obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o
- obj-$(CONFIG_MTD_TQM834x) += tqm834x.o
-+###### for Storlink Soc #######
-+obj-$(CONFIG_MTD_SL2312_CFI) += sl2312-flash-cfi.o
-+obj-$(CONFIG_MTD_SL2312_SERIAL_ATMEL) += sl2312-flash-atmel.o
-+obj-$(CONFIG_MTD_SL2312_SERIAL_ST) += sl2312-flash-m25p80.o
diff --git a/target/linux/storm/patches/008-serial.patch b/target/linux/storm/patches/008-serial.patch
deleted file mode 100644
index a5c5e8de3f..0000000000
--- a/target/linux/storm/patches/008-serial.patch
+++ /dev/null
@@ -1,2809 +0,0 @@
---- /dev/null
-+++ b/drivers/serial/it8712.c
-@@ -0,0 +1,858 @@
-+/*
-+ * linux/drivers/char/serial_uart00.c
-+ *
-+ * Driver for UART00 serial ports
-+ *
-+ * Based on drivers/char/serial_amba.c, by ARM Limited &
-+ * Deep Blue Solutions Ltd.
-+ * Copyright 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ * $Id: it8712.c,v 1.2 2006/06/06 06:36:04 middle Exp $
-+ *
-+ */
-+#include <linux/module.h>
-+#include <linux/tty.h>
-+#include <linux/ioport.h>
-+#include <linux/init.h>
-+#include <linux/serial.h>
-+#include <linux/console.h>
-+#include <linux/sysrq.h>
-+#include <asm/hardware.h>
-+#include <asm/system.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/uaccess.h>
-+#include <asm/bitops.h>
-+#include <asm/sizes.h>
-+
-+#if defined(CONFIG_SERIAL_IT8712_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-+#define SUPPORT_SYSRQ
-+#endif
-+
-+#include <linux/serial_core.h>
-+#include <asm/arch/sl2312.h>
-+#include <asm/arch/int_ctrl.h>
-+#include <asm/arch/it8712.h>
-+#include "it8712.h"
-+
-+//#define DEBUG 1
-+#define UART_NR 1
-+
-+#define SERIAL_IT8712_NAME "ttySI"
-+#define SERIAL_IT8712_MAJOR 204
-+#define SERIAL_IT8712_MINOR 41 /* Temporary - will change in future */
-+#define SERIAL_IT8712_NR UART_NR
-+#define UART_PORT_SIZE 0x50
-+#define LPC_HOST_CONTINUE_MODE 0x00000040
-+
-+#define IT8712_NO_PORTS UART_NR
-+#define IT8712_ISR_PASS_LIMIT 256
-+
-+#define LPC_BUS_CTRL *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 4))
-+#define LPC_BUS_STATUS *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 4))
-+#define LPC_SERIAL_IRQ_CTRL *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 8))
-+#define LPC_SERIAL_IRQ_STATUS *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x0c))
-+#define LPC_SERIAL_IRQ_TRITYPE *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x10))
-+#define LPC_SERIAL_IRQ_POLARITY *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x14))
-+#define LPC_SERIAL_IRQ_ENABLE *(unsigned int*)(IO_ADDRESS(SL2312_LPC_HOST_BASE + 0x18))
-+
-+
-+
-+
-+/*
-+ * Access macros for the SL2312 UARTs
-+ */
-+#define UART_GET_INT_STATUS(p) (inb(((p)->membase+UART_IIR)) & 0x0F) // interrupt identification
-+#define UART_PUT_IER(p, c) outb(c,((p)->membase+UART_IER)) // interrupt enable
-+#define UART_GET_IER(p) inb(((p)->membase+UART_IER))
-+#define UART_PUT_CHAR(p, c) outb(c,((p)->membase+UART_TX)) // transmitter holding
-+#define UART_GET_CHAR(p) inb(((p)->membase+UART_RX)) // receive buffer
-+#define UART_GET_LSR(p) inb(((p)->membase+UART_LSR)) // line status
-+#define UART_GET_MSR(p) inb(((p)->membase+UART_MSR)) // modem status
-+#define UART_GET_MCR(p) inb(((p)->membase+UART_MCR)) // modem control
-+#define UART_PUT_MCR(p, c) outb(c,((p)->membase+UART_MCR))
-+#define UART_GET_LCR(p) inb(((p)->membase+UART_LCR)) // mode control
-+#define UART_PUT_LCR(p, c) outb(c,((p)->membase+UART_LCR))
-+#define UART_PUT_FCR(p, c) outb(c,((p)->membase+UART_FCR)) // fifo control
-+#define UART_GET_DIV_HI(p) inb(((p)->membase+UART_DLM))
-+#define UART_PUT_DIV_HI(p, c) outb(c,((p)->membase+UART_DLM))
-+#define UART_GET_DIV_LO(p) inb(((p)->membase+UART_DLL))
-+#define UART_PUT_DIV_LO(p, c) outb(c,((p)->membase+UART_DLL))
-+#define UART_PUT_MDR(p, c) outb(c,UART_MDR((p)->membase))
-+#define UART_RX_DATA(s) ((s) & UART_LSR_DR)
-+#define UART_TX_READY(s) ((s) & UART_LSR_THRE)
-+
-+static void it8712_stop_tx(struct uart_port *port, u_int from_tty)
-+{
-+ unsigned int reg;
-+
-+ //printk("it8712 stop tx : \n");
-+ reg = UART_GET_IER(port);
-+ reg &= ~(UART_IER_THRI);
-+ UART_PUT_IER(port, reg);
-+}
-+
-+static void it8712_stop_rx(struct uart_port *port)
-+{
-+ unsigned int reg;
-+
-+ //printk("it8712 stop rx : \n");
-+ reg = UART_GET_IER(port);
-+ reg &= ~(UART_IER_RDI);
-+ UART_PUT_IER(port, reg);
-+
-+}
-+
-+static void it8712_enable_ms(struct uart_port *port)
-+{
-+ unsigned int reg;
-+
-+ //printk("it8712 enable ms : \n");
-+
-+ reg = UART_GET_IER(port);
-+ reg |= (UART_IER_MSI);
-+ UART_PUT_IER(port, reg);
-+
-+}
-+
-+static void it8712_rx_chars(struct uart_port *port, struct pt_regs *regs)
-+{
-+ struct tty_struct *tty = port->info->tty;
-+ unsigned int status, mask, ch, flg, ignored = 0;
-+
-+ // printk("it8712_rx_chars : \n");
-+ status = UART_GET_LSR(port);
-+ while (UART_RX_DATA(status)) {
-+
-+ /*
-+ * We need to read rds before reading the
-+ * character from the fifo
-+ */
-+ ch = UART_GET_CHAR(port);
-+ port->icount.rx++;
-+
-+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-+ goto ignore_char;
-+
-+ flg = TTY_NORMAL;
-+
-+ /*
-+ * Note that the error handling code is
-+ * out of the main execution path
-+ */
-+
-+ if (status & (UART_LSR_OE|UART_LSR_PE|UART_LSR_FE|UART_LSR_BI|UART_LSR_DE))
-+ goto handle_error;
-+ if (uart_handle_sysrq_char(port, ch, regs))
-+ goto ignore_char;
-+
-+ error_return:
-+ *tty->flip.flag_buf_ptr++ = flg;
-+ *tty->flip.char_buf_ptr++ = ch;
-+ tty->flip.count++;
-+ ignore_char:
-+ status = UART_GET_LSR(port);
-+ } // end of while
-+out:
-+ tty_flip_buffer_push(tty);
-+ return;
-+
-+handle_error:
-+ if (status & UART_LSR_BI) {
-+ status &= ~(UART_LSR_FE);
-+ port->icount.brk++;
-+
-+#ifdef SUPPORT_SYSRQ
-+ if (uart_handle_break(port))
-+ goto ignore_char;
-+#endif
-+ } else if (status & UART_LSR_PE)
-+ port->icount.parity++;
-+ else if (status & UART_LSR_FE)
-+ port->icount.frame++;
-+
-+ if (status & UART_LSR_OE)
-+ port->icount.overrun++;
-+
-+ if (status & port->ignore_status_mask) {
-+ if (++ignored > 100)
-+ goto out;
-+ goto ignore_char;
-+ }
-+
-+ mask = status & port->read_status_mask;
-+
-+ if (mask & UART_LSR_BI)
-+ flg = TTY_BREAK;
-+ else if (mask & UART_LSR_PE)
-+ flg = TTY_PARITY;
-+ else if (mask & UART_LSR_FE)
-+ flg = TTY_FRAME;
-+
-+ if (status & UART_LSR_OE) {
-+ /*
-+ * CHECK: does overrun affect the current character?
-+ * ASSUMPTION: it does not.
-+ */
-+ *tty->flip.flag_buf_ptr++ = flg;
-+ *tty->flip.char_buf_ptr++ = ch;
-+ tty->flip.count++;
-+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-+ goto ignore_char;
-+ ch = 0;
-+ flg = TTY_OVERRUN;
-+ }
-+#ifdef SUPPORT_SYSRQ
-+ port->sysrq = 0;
-+#endif
-+ goto error_return;
-+}
-+
-+static void it8712_tx_chars(struct uart_port *port)
-+{
-+ struct circ_buf *xmit = &port->info->xmit;
-+ int count;
-+
-+ if (port->x_char) {
-+ while(!(UART_GET_LSR(port)&UART_LSR_THRE));
-+ UART_PUT_CHAR(port, port->x_char);
-+ port->icount.tx++;
-+ port->x_char = 0;
-+
-+ return;
-+ }
-+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
-+ it8712_stop_tx(port, 0);
-+ return;
-+ }
-+
-+ count = port->fifosize >> 1;
-+ do {
-+ while(!(UART_GET_LSR(port)&UART_LSR_THRE));
-+ UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
-+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-+ port->icount.tx++;
-+ if (uart_circ_empty(xmit))
-+ break;
-+ } while (--count > 0);
-+
-+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-+ uart_write_wakeup(port);
-+
-+ if (uart_circ_empty(xmit))
-+ it8712_stop_tx(port, 0);
-+}
-+
-+static void it8712_start_tx(struct uart_port *port, unsigned int tty_start)
-+{
-+ unsigned int reg;
-+
-+ //printk("it8712 start tx : \n");
-+ reg = UART_GET_IER(port);
-+ reg |= (UART_IER_THRI);
-+ UART_PUT_IER(port, reg);
-+ it8712_tx_chars(port);
-+}
-+
-+static void it8712_modem_status(struct uart_port *port)
-+{
-+ unsigned int status;
-+
-+// printk("it8712 modem status : \n");
-+
-+ status = UART_GET_MSR(port);
-+
-+ if (!(status & (UART_MSR_DCTS | UART_MSR_DDSR |
-+ UART_MSR_TERI | UART_MSR_DDCD)))
-+ return;
-+
-+ if (status & UART_MSR_DDCD)
-+ uart_handle_dcd_change(port, status & UART_MSR_DCD);
-+
-+ if (status & UART_MSR_DDSR)
-+ port->icount.dsr++;
-+
-+ if (status & UART_MSR_DCTS)
-+ uart_handle_cts_change(port, status & UART_MSR_CTS);
-+
-+ wake_up_interruptible(&port->info->delta_msr_wait);
-+
-+}
-+
-+static irqreturn_t it8712_int(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+ struct uart_port *port = dev_id;
-+ unsigned int status, pass_counter = 0, data;
-+
-+
-+ data = LPC_SERIAL_IRQ_STATUS;
-+ if((data&0x10)==0x10)
-+ {
-+ status = UART_GET_INT_STATUS(port);
-+ do {
-+// printk("it8712_int: status %x \n", status);
-+ switch(status)
-+ {
-+ case UART_IIR_RDI:
-+ case UART_IIR_RLSI:
-+ case UART_IIR_RCTO:
-+ it8712_rx_chars(port, regs);
-+ break;
-+ case UART_IIR_THRI:
-+ it8712_tx_chars(port);
-+ break;
-+ case UART_IIR_MSI:
-+ it8712_modem_status(port);
-+ break;
-+ default:
-+ break;
-+ }
-+ if (pass_counter++ > IT8712_ISR_PASS_LIMIT)
-+ break;
-+
-+ status = UART_GET_INT_STATUS(port);
-+ } while (status);
-+ }
-+
-+ status = 0;
-+ status |= (IRQ_LPC_MASK);
-+ *((volatile unsigned int *)IRQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = status;
-+
-+ //cnt=0;
-+ //do{
-+ // data = LPC_SERIAL_IRQ_STATUS;
-+ LPC_SERIAL_IRQ_STATUS = data;
-+ // cnt++;
-+ //}while(data);
-+ //if(cnt>2)
-+ // printf("it8712_uart_Isr clear LPC_SERIAL_IRQ_STATUS %x \n", cnt);
-+ return IRQ_HANDLED;
-+}
-+
-+static u_int it8712_tx_empty(struct uart_port *port)
-+{
-+// printk("it8712 tx empty : \n");
-+
-+ return ((UART_GET_LSR(port) & UART_LSR_THRE)? TIOCSER_TEMT : 0);
-+}
-+
-+static u_int it8712_get_mctrl(struct uart_port *port)
-+{
-+ unsigned int result = 0;
-+ unsigned int status;
-+
-+// printk("it8712 get mctrl : \n");
-+
-+ status = UART_GET_MSR(port);
-+ if (status & UART_MSR_DCD)
-+ result |= TIOCM_CAR;
-+ if (status & UART_MSR_DSR)
-+ result |= TIOCM_DSR;
-+ if (status & UART_MSR_CTS)
-+ result |= TIOCM_CTS;
-+ if (status & UART_MSR_RI)
-+ result |= TIOCM_RI;
-+
-+ return result;
-+}
-+
-+static void it8712_set_mctrl_null(struct uart_port *port, u_int mctrl)
-+{
-+}
-+
-+static void it8712_break_ctl(struct uart_port *port, int break_state)
-+{
-+ unsigned int lcr;
-+
-+// printk("it8712 break ctl : \n");
-+
-+ lcr = UART_GET_LCR(port);
-+ if (break_state == -1)
-+ lcr |= UART_LCR_SBC;
-+ else
-+ lcr &= ~UART_LCR_SBC;
-+ UART_PUT_LCR(port, lcr);
-+}
-+
-+static inline u_int uart_calculate_quot(struct uart_port *port, u_int baud)
-+{
-+ u_int quot;
-+
-+ /* Special case: B0 rate */
-+ if (!baud)
-+ baud = 9600;
-+
-+ quot = (port->uartclk/(16 * baud)) ;
-+
-+ return quot;
-+}
-+static void it8712_set_termios(struct uart_port *port, struct termios *termios,
-+ struct termios *old)
-+{
-+ unsigned int uart_mc, old_ier, baud, quot;
-+ unsigned long flags;
-+
-+ termios->c_cflag |= CREAD;
-+ termios->c_cflag |= CLOCAL;
-+#ifdef DEBUG
-+ printk("it8712_set_cflag(0x%x) called\n", cflag);
-+#endif
-+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-+ quot = uart_get_divisor(port, baud);
-+
-+ /* byte size and parity */
-+ switch (termios->c_cflag & CSIZE) {
-+ case CS5:
-+ uart_mc = UART_LCR_WLEN5;
-+ break;
-+ case CS6:
-+ uart_mc = UART_LCR_WLEN6;
-+ break;
-+ case CS7:
-+ uart_mc = UART_LCR_WLEN7;
-+ break;
-+ default: // CS8
-+ uart_mc = UART_LCR_WLEN8;
-+ break;
-+ }
-+
-+ if (termios->c_cflag & CSTOPB)
-+ uart_mc|= UART_LCR_STOP;
-+ if (termios->c_cflag & PARENB) {
-+ uart_mc |= UART_LCR_EVEN;
-+ if (!(termios->c_cflag & PARODD))
-+ uart_mc |= UART_LCR_ODD;
-+ }
-+
-+ spin_lock_irqsave(&port->lock, flags);
-+ /*
-+ * Update the per-port timeout
-+ */
-+ uart_update_timeout(port, termios->c_cflag, baud);
-+ port->read_status_mask = UART_LSR_OE;
-+ if (termios->c_iflag & INPCK)
-+ port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
-+ if (termios->c_iflag & (BRKINT | PARMRK))
-+ port->read_status_mask |= UART_LSR_BI;
-+
-+ /*
-+ * Characters to ignore
-+ */
-+ port->ignore_status_mask = 0;
-+ if (termios->c_iflag & IGNPAR)
-+ port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE;
-+ if (termios->c_iflag & IGNBRK) {
-+ port->ignore_status_mask |= UART_LSR_BI;
-+ /*
-+ * If we're ignoring parity and break indicators,
-+ * ignore overruns to (for real raw support).
-+ */
-+ if (termios->c_iflag & IGNPAR)
-+ port->ignore_status_mask |= UART_LSR_OE;
-+ }
-+
-+ old_ier = UART_GET_IER(port);
-+
-+ if(UART_ENABLE_MS(port, termios->c_cflag))
-+ old_ier |= UART_IER_MSI;
-+
-+ /* Set baud rate */
-+ quot = quot / 13;
-+ UART_PUT_LCR(port, UART_LCR_DLAB);
-+ UART_PUT_DIV_LO(port, (quot & 0xff));
-+ UART_PUT_DIV_HI(port, ((quot & 0xf00) >> 8));
-+
-+ UART_PUT_LCR(port, uart_mc);
-+// UART_PUT_LCR(port, 0x07); // ???? it is wired
-+ UART_PUT_MCR(port, 0x08);
-+ UART_PUT_FCR(port, 0x01);
-+ UART_PUT_IER(port, 0x07);
-+
-+ spin_unlock_irqrestore(&port->lock, flags);
-+}
-+
-+static int it8712_startup(struct uart_port *port)
-+{
-+ int retval, i;
-+ unsigned int regs;
-+
-+ //printk("it8712 startup : \n");
-+
-+ /*
-+ * Use iobase to store a pointer to info. We need this to start a
-+ * transmission as the tranmittr interrupt is only generated on
-+ * the transition to the idle state
-+ */
-+
-+ // regs = 0;
-+ // regs |= (IRQ_LPC_MASK);
-+ // *((volatile unsigned int *)IRQ_CLEAR(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
-+
-+ /*
-+ * Allocate the IRQ
-+ */
-+ retval = request_irq(port->irq, it8712_int, SA_INTERRUPT, "it8712", port);
-+ if (retval)
-+ return retval;
-+
-+ //printk("Init LPC int...........\n");
-+ /* setup interrupt controller */
-+ regs = *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+ regs &= ~(IRQ_LPC_MASK);
-+ *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
-+ regs = *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+ regs &= ~(IRQ_LPC_MASK);
-+ *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
-+ *((volatile unsigned int *)IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_LPC_MASK);
-+
-+ LPC_SERIAL_IRQ_POLARITY = 0x10; //0x10; //0x02;
-+ LPC_SERIAL_IRQ_TRITYPE = 0x10; //0x10;//
-+ LPC_SERIAL_IRQ_ENABLE = 0x10;
-+
-+ LPC_BUS_CTRL = 0xc0;
-+ LPC_SERIAL_IRQ_CTRL = 0xc0;
-+ for(i=0;i<1000;i++) ;
-+ LPC_SERIAL_IRQ_CTRL = 0x80;
-+ /*
-+ * Finally, enable interrupts. Use the TII interrupt to minimise
-+ * the number of interrupts generated. If higher performance is
-+ * needed, consider using the TI interrupt with a suitable FIFO
-+ * threshold
-+ */
-+ //UART_PUT_IER(port, (UART_IER_RDI|UART_IER_THRI));
-+ UART_PUT_IER(port, (UART_IER_RDI|UART_IER_THRI|UART_IER_RLSI));//middle
-+
-+ return 0;
-+}
-+
-+static void it8712_shutdown(struct uart_port *port)
-+{
-+ //printk("it8712 shutdown : \n");
-+
-+ /*
-+ * disable all interrupts, disable the port
-+ */
-+ UART_PUT_IER(port, 0x0);
-+
-+ /* disable break condition and fifos */
-+// UART_PUT_MCR(port, (UART_GET_MCR(port)&UART_MCR_MASK));
-+
-+ /*
-+ * Free the interrupt
-+ */
-+ free_irq(port->irq, port);
-+}
-+
-+static const char *it8712_type(struct uart_port *port)
-+{
-+ return port->type == PORT_IT8712 ? "IT8712" : NULL;
-+}
-+
-+/*
-+ * Release the memory region(s) being used by 'port'
-+ */
-+static void it8712_release_port(struct uart_port *port)
-+{
-+// printk("it8712 release port : \n");
-+
-+ release_mem_region(port->mapbase, UART_PORT_SIZE);
-+}
-+
-+/*
-+ * Request the memory region(s) being used by 'port'
-+ */
-+static int it8712_request_port(struct uart_port *port)
-+{
-+ return request_mem_region(port->mapbase, UART_PORT_SIZE,
-+ "serial_it8712") != NULL ? 0 : -EBUSY;
-+}
-+
-+/*
-+ * Configure/autoconfigure the port.
-+ */
-+static void it8712_config_port(struct uart_port *port, int flags)
-+{
-+
-+ if (flags & UART_CONFIG_TYPE) {
-+ if (it8712_request_port(port) == 0)
-+ port->type = PORT_IT8712;
-+ }
-+}
-+
-+/*
-+ * verify the new serial_struct (for TIOCSSERIAL).
-+ */
-+static int it8712_verify_port(struct uart_port *port, struct serial_struct *ser)
-+{
-+ int ret = 0;
-+
-+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_UART00)
-+ ret = -EINVAL;
-+ if (ser->irq < 0 || ser->irq >= NR_IRQS)
-+ ret = -EINVAL;
-+ if (ser->baud_base < 9600)
-+ ret = -EINVAL;
-+ return ret;
-+}
-+
-+static struct uart_ops it8712_pops = {
-+ .tx_empty = it8712_tx_empty,
-+ .set_mctrl = it8712_set_mctrl_null,
-+ .get_mctrl = it8712_get_mctrl,
-+ .stop_tx = it8712_stop_tx,
-+ .start_tx = it8712_start_tx,
-+ .stop_rx = it8712_stop_rx,
-+ .enable_ms = it8712_enable_ms,
-+ .break_ctl = it8712_break_ctl,
-+ .startup = it8712_startup,
-+ .shutdown = it8712_shutdown,
-+ .set_termios = it8712_set_termios,
-+ .type = it8712_type,
-+ .release_port = it8712_release_port,
-+ .request_port = it8712_request_port,
-+ .config_port = it8712_config_port,
-+ .verify_port = it8712_verify_port,
-+};
-+
-+#ifdef CONFIG_ARCH_SL2312
-+
-+static struct uart_port it8712_ports[UART_NR] = {
-+ {
-+ membase: (void *)0,
-+ mapbase: 0,
-+ iotype: SERIAL_IO_MEM,
-+ irq: 0,
-+ uartclk: UART_CLK/2,
-+ fifosize: 16,
-+ ops: &it8712_pops,
-+ flags: ASYNC_BOOT_AUTOCONF,
-+ }
-+};
-+
-+#endif
-+
-+#ifdef CONFIG_SERIAL_IT8712_CONSOLE
-+#ifdef used_and_not_const_char_pointer
-+static int it8712_console_read(struct uart_port *port, char *s, u_int count)
-+{
-+ unsigned int status;
-+ int c;
-+#ifdef DEBUG
-+ printk("it8712_console_read() called\n");
-+#endif
-+
-+ c = 0;
-+ while (c < count) {
-+ status = UART_GET_LSR(port);
-+ if (UART_RX_DATA(status)) {
-+ *s++ = UART_GET_CHAR(port);
-+ c++;
-+ } else {
-+ // nothing more to get, return
-+ return c;
-+ }
-+ }
-+ // return the count
-+ return c;
-+}
-+#endif
-+static void it8712_console_write(struct console *co, const char *s, unsigned count)
-+{
-+#ifdef CONFIG_ARCH_SL2312
-+ struct uart_port *port = it8712_ports + co->index;
-+ unsigned int status, old_ies;
-+ int i;
-+
-+ /*
-+ * First save the CR then disable the interrupts
-+ */
-+ old_ies = UART_GET_IER(port);
-+ //if(old_ies!=7)
-+ //{
-+ //
-+ // printk("old_ies = %x\n",old_ies);
-+ // old_ies = 7;
-+ //}
-+ UART_PUT_IER(port,0x0);
-+
-+ /*
-+ * Now, do each character
-+ */
-+ for (i = 0; i < count; i++) {
-+ do {
-+ status = UART_GET_LSR(port);
-+ } while (!UART_TX_READY(status));
-+ UART_PUT_CHAR(port, s[i]);
-+ if (s[i] == '\n') {
-+ do {
-+ status = UART_GET_LSR(port);
-+ } while (!UART_TX_READY(status));
-+ UART_PUT_CHAR(port, '\r');
-+ }
-+ }
-+
-+ /*
-+ * Finally, wait for transmitter to become empty
-+ * and restore the IES
-+ */
-+ do {
-+ status = UART_GET_LSR(port);
-+ } while (!(status&UART_LSR_THRE));
-+ UART_PUT_IER(port, old_ies);
-+#endif
-+}
-+
-+static void /*__init*/ it8712_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
-+{
-+ //printk("it8712 console get options : \n");
-+
-+ u_int uart_mc, quot;
-+ uart_mc= UART_GET_MCR(port);
-+
-+ *parity = 'n';
-+ if (uart_mc & UART_LCR_PARITY) {
-+ if (uart_mc & UART_LCR_EVEN)
-+ *parity = 'e';
-+ else
-+ *parity = 'o';
-+ }
-+
-+ switch (uart_mc & UART_LCR_MSK){
-+
-+ case UART_LCR_WLEN5:
-+ *bits = 5;
-+ break;
-+ case UART_LCR_WLEN6:
-+ *bits = 6;
-+ break;
-+ case UART_LCR_WLEN7:
-+ *bits = 7;
-+ break;
-+ case UART_LCR_WLEN8:
-+ *bits = 8;
-+ break;
-+ }
-+ UART_PUT_MCR(port,UART_LCR_DLAB);
-+ quot = UART_GET_DIV_LO(port) | (UART_GET_DIV_HI(port) << 8);
-+ UART_PUT_MCR(port,uart_mc);
-+ *baud = (port->uartclk / (16 *quot));
-+}
-+
-+static int __init it8712_console_setup(struct console *co, char *options)
-+{
-+ struct uart_port *port;
-+ int baud = 38400;
-+ int bits = 8;
-+ int parity = 'n';
-+ int flow= 'n';
-+ int base;//, irq;
-+ int i ;
-+
-+ printk("it8712 console setup : \n");
-+
-+ LPCSetConfig(0, 0x02, 0x01);
-+ LPCSetConfig(LDN_SERIAL1, 0x30, 0x1);
-+ LPCSetConfig(LDN_SERIAL1, 0x23, 0x0);
-+ base = IT8712_IO_BASE;
-+ base += ((LPCGetConfig(LDN_SERIAL1, 0x60) << 8) + LPCGetConfig(LDN_SERIAL1, 0x61));
-+ it8712_ports[0].mapbase = base;
-+ it8712_ports[0].membase = (void *)IO_ADDRESS(base);
-+ it8712_ports[0].irq = IRQ_LPC_OFFSET;
-+ // irq = LPCGetConfig(LDN_SERIAL1, 0x70);
-+ //it8712_ports[0].irq += irq;
-+
-+ //printk("it8712 irq is %x \n", it8712_ports[0].irq);
-+
-+ // setup LPC Host 'quiet mode'
-+ //*((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) |= LPC_HOST_CONTINUE_MODE ;
-+ //for(i=0;i<1000;i++) ; // delay
-+ //*((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) &= ~(LPC_HOST_CONTINUE_MODE) ;
-+ LPC_BUS_CTRL = 0xc0;
-+ LPC_SERIAL_IRQ_CTRL = 0xc0;
-+ for(i=0;i<1000;i++) ;
-+ LPC_SERIAL_IRQ_CTRL = 0x80;
-+
-+#ifdef CONFIG_ARCH_SL2312
-+ /*
-+ * Check whether an invalid uart number has been specified, and
-+ * if so, search for the first available port that does have
-+ * console support.
-+ */
-+ port = uart_get_console(it8712_ports,IT8712_NO_PORTS,co);
-+#else
-+ return -ENODEV;
-+#endif
-+
-+ if (options)
-+ uart_parse_options(options, &baud, &parity, &bits, &flow);
-+ else
-+ it8712_console_get_options(port, &baud, &parity, &bits);
-+
-+ return uart_set_options(port, co, baud, parity, bits, flow);
-+}
-+
-+extern struct uart_driver it8712_reg;
-+static struct console it8712_console = {
-+ .name = SERIAL_IT8712_NAME,
-+ .write = it8712_console_write,
-+ .device = uart_console_device,
-+ .setup = it8712_console_setup,
-+ .flags = CON_PRINTBUFFER,
-+ .index = 0,
-+ .data = &it8712_reg,
-+};
-+
-+static int __init it8712_console_init(void)
-+{
-+ register_console(&it8712_console);
-+ return 0;
-+}
-+
-+console_initcall(it8712_console_init);
-+
-+#define IT8712_CONSOLE &it8712_console
-+#else
-+#define IT8712_CONSOLE NULL
-+#endif
-+
-+static struct uart_driver it8712_reg = {
-+ .owner = NULL,
-+ .driver_name = SERIAL_IT8712_NAME,
-+ .dev_name = SERIAL_IT8712_NAME,
-+ .major = SERIAL_IT8712_MAJOR,
-+ .minor = SERIAL_IT8712_MINOR,
-+ .nr = UART_NR,
-+ .cons = IT8712_CONSOLE,
-+};
-+
-+static int __init it8712_init(void)
-+{
-+ int result;
-+ //printk("serial_it8712: it871212_init \n");
-+
-+
-+ result = uart_register_driver(&it8712_reg);
-+ if(result)
-+ return result;
-+ result = uart_add_one_port(&it8712_reg, &it8712_ports[0]);
-+
-+ return result;
-+
-+}
-+
-+
-+__initcall(it8712_init);
---- /dev/null
-+++ b/drivers/serial/it8712.h
-@@ -0,0 +1,135 @@
-+#define UART_RX 0 /* In: Receive buffer (DLAB=0) */
-+#define UART_TX 0 /* Out: Transmit buffer (DLAB=0) */
-+#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */
-+#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx
-+ * In: Fifo count
-+ * Out: Fifo custom trigger levels
-+ * XR16C85x only */
-+
-+#define UART_DLM 1 /* Out: Divisor Latch High (DLAB=1) */
-+#define UART_IER 1 /* Out: Interrupt Enable Register */
-+#define UART_FCTR 1 /* (LCR=BF) Feature Control Register
-+ * XR16C85x only */
-+
-+#define UART_IIR 2 /* In: Interrupt ID Register */
-+#define UART_FCR 2 /* Out: FIFO Control Register */
-+#define UART_EFR 2 /* I/O: Extended Features Register */
-+ /* (DLAB=1, 16C660 only) */
-+
-+#define UART_LCR 3 /* Out: Line Control Register */
-+#define UART_MCR 4 /* Out: Modem Control Register */
-+#define UART_LSR 5 /* In: Line Status Register */
-+#define UART_MSR 6 /* In: Modem Status Register */
-+#define UART_SCR 7 /* I/O: Scratch Register */
-+#define UART_EMSR 7 /* (LCR=BF) Extended Mode Select Register
-+ * FCTR bit 6 selects SCR or EMSR
-+ * XR16c85x only */
-+
-+/*
-+ * These are the definitions for the FIFO Control Register
-+ * (16650 only)
-+ */
-+#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */
-+#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */
-+#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */
-+#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */
-+#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */
-+#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */
-+#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */
-+#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */
-+#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */
-+/* 16650 redefinitions */
-+#define UART_FCR6_R_TRIGGER_8 0x00 /* Mask for receive trigger set at 1 */
-+#define UART_FCR6_R_TRIGGER_16 0x40 /* Mask for receive trigger set at 4 */
-+#define UART_FCR6_R_TRIGGER_24 0x80 /* Mask for receive trigger set at 8 */
-+#define UART_FCR6_R_TRIGGER_28 0xC0 /* Mask for receive trigger set at 14 */
-+#define UART_FCR6_T_TRIGGER_16 0x00 /* Mask for transmit trigger set at 16 */
-+#define UART_FCR6_T_TRIGGER_8 0x10 /* Mask for transmit trigger set at 8 */
-+#define UART_FCR6_T_TRIGGER_24 0x20 /* Mask for transmit trigger set at 24 */
-+#define UART_FCR6_T_TRIGGER_30 0x30 /* Mask for transmit trigger set at 30 */
-+/* TI 16750 definitions */
-+#define UART_FCR7_64BYTE 0x20 /* Go into 64 byte mode */
-+
-+/*
-+ * These are the definitions for the Line Control Register
-+ *
-+ * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
-+ * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
-+ */
-+#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
-+#define UART_LCR_SBC 0x40 /* Set break control */
-+#define UART_LCR_SPAR 0x20 /* Stick parity (?) */
-+#define UART_LCR_EPAR 0x10 /* Even parity select */
-+#define UART_LCR_PARITY 0x08 /* Parity Enable */
-+#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */
-+#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */
-+#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */
-+#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */
-+#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */
-+#define UART_LCR_EVEN 0x18 /* Even parity */
-+#define UART_LCR_ODD 0x08 /* Odd parity */
-+#define UART_LCR_MSK 0x03
-+/*
-+ * These are the definitions for the Line Status Register
-+ */
-+#define UART_LSR_DE 0x80 /* FIFO Data Error */
-+#define UART_LSR_TEMT 0x40 /* Transmitter empty */
-+#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */
-+#define UART_LSR_BI 0x10 /* Break interrupt indicator */
-+#define UART_LSR_FE 0x08 /* Frame error indicator */
-+#define UART_LSR_PE 0x04 /* Parity error indicator */
-+#define UART_LSR_OE 0x02 /* Overrun error indicator */
-+#define UART_LSR_DR 0x01 /* Receiver data ready */
-+
-+/*
-+ * These are the definitions for the Interrupt Identification Register
-+ */
-+#define UART_IIR_NO_INT 0x01 /* No interrupts pending */
-+#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */
-+
-+#define UART_IIR_MSI 0x00 /* Modem status interrupt */
-+#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */
-+#define UART_IIR_RDI 0x04 /* Receiver data interrupt */
-+#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */
-+#define UART_IIR_RCTO 0x0c /* Receiver character timeout interrupt */
-+/*
-+ * These are the definitions for the Interrupt Enable Register
-+ */
-+#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */
-+#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */
-+#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */
-+#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */
-+/*
-+ * Sleep mode for ST16650 and TI16750.
-+ * Note that for 16650, EFR-bit 4 must be selected as well.
-+ */
-+#define UART_IERX_SLEEP 0x10 /* Enable sleep mode */
-+
-+/*
-+ * These are the definitions for the Modem Control Register
-+ */
-+#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
-+#define UART_MCR_OUT2 0x08 /* Out2 complement */
-+#define UART_MCR_OUT1 0x04 /* Out1 complement */
-+#define UART_MCR_RTS 0x02 /* RTS complement */
-+#define UART_MCR_DTR 0x01 /* DTR complement */
-+
-+/*
-+ * These are the definitions for the Modem Status Register
-+ */
-+#define UART_MSR_DCD 0x80 /* Data Carrier Detect */
-+#define UART_MSR_RI 0x40 /* Ring Indicator */
-+#define UART_MSR_DSR 0x20 /* Data Set Ready */
-+#define UART_MSR_CTS 0x10 /* Clear to Send */
-+#define UART_MSR_DDCD 0x08 /* Delta DCD */
-+#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */
-+#define UART_MSR_DDSR 0x02 /* Delta DSR */
-+#define UART_MSR_DCTS 0x01 /* Delta CTS */
-+#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */
-+
-+#define UART_PARITY_NONE 0x00
-+#define UART_PARITY_ODD 0x01
-+#define UART_PARITY_EVEN 0x02
-+
-+
-+
---- /dev/null
-+++ b/drivers/serial/serial_it8712.c
-@@ -0,0 +1,876 @@
-+/*
-+ * linux/drivers/char/serial_uart00.c
-+ *
-+ * Driver for UART00 serial ports
-+ *
-+ * Based on drivers/char/serial_amba.c, by ARM Limited &
-+ * Deep Blue Solutions Ltd.
-+ * Copyright 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ * $Id: serial_it8712.c,v 1.1.1.1 2006/04/03 08:41:00 amos_lee Exp $
-+ *
-+ */
-+#include <linux/module.h>
-+
-+#include <linux/errno.h>
-+#include <linux/signal.h>
-+#include <linux/sched.h>
-+#include <linux/interrupt.h>
-+#include <linux/tty.h>
-+#include <linux/tty_flip.h>
-+#include <linux/major.h>
-+#include <linux/string.h>
-+#include <linux/fcntl.h>
-+#include <linux/ptrace.h>
-+#include <linux/ioport.h>
-+#include <linux/mm.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/circ_buf.h>
-+#include <linux/serial.h>
-+#include <linux/console.h>
-+#include <linux/sysrq.h>
-+
-+#include <asm/system.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/uaccess.h>
-+#include <asm/bitops.h>
-+#include <asm/sizes.h>
-+
-+#if defined(CONFIG_SERIAL_IT8712_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-+#define SUPPORT_SYSRQ
-+#endif
-+
-+#include <linux/serial_core.h>
-+#include <asm/arch/sl2312.h>
-+#include <asm/arch/int_ctrl.h>
-+#include <asm/arch/it8712.h>
-+#include "serial_it8712.h"
-+
-+//#define DEBUG 1
-+#define UART_NR 1
-+
-+#define SERIAL_IT8712_NAME "ttySI"
-+#define SERIAL_IT8712_MAJOR 204
-+#define SERIAL_IT8712_MINOR 41 /* Temporary - will change in future */
-+#define SERIAL_IT8712_NR UART_NR
-+#define UART_PORT_SIZE 0x50
-+
-+#define CALLOUT_IT8712_NAME "cuaslI"
-+#define CALLOUT_IT8712_MAJOR 205
-+#define CALLOUT_IT8712_MINOR 41 /* Temporary - will change in future */
-+#define CALLOUT_IT8712_NR UART_NR
-+#define LPC_HOST_CONTINUE_MODE 0x00000040
-+
-+#define IT8712_NO_PORTS UART_NR
-+
-+static struct tty_driver normal, callout;
-+static struct tty_struct *it8712_table[UART_NR];
-+static struct termios *it8712_termios[UART_NR], *it8712_termios_locked[UART_NR];
-+static struct console it8712_console;
-+
-+#define IT8712_ISR_PASS_LIMIT 256
-+
-+/*
-+ * Access macros for the SL2312 UARTs
-+ */
-+#define UART_GET_INT_STATUS(p) (inb(((p)->membase+UART_IIR)) & 0x0F) // interrupt identification
-+#define UART_PUT_IER(p, c) outb(c,((p)->membase+UART_IER)) // interrupt enable
-+#define UART_GET_IER(p) inb(((p)->membase+UART_IER))
-+#define UART_PUT_CHAR(p, c) outb(c,((p)->membase+UART_TX)) // transmitter holding
-+#define UART_GET_CHAR(p) inb(((p)->membase+UART_RX)) // receive buffer
-+#define UART_GET_LSR(p) inb(((p)->membase+UART_LSR)) // line status
-+#define UART_GET_MSR(p) inb(((p)->membase+UART_MSR)) // modem status
-+#define UART_GET_MCR(p) inb(((p)->membase+UART_MCR)) // modem control
-+#define UART_PUT_MCR(p, c) outb(c,((p)->membase+UART_MCR))
-+#define UART_GET_LCR(p) inb(((p)->membase+UART_LCR)) // mode control
-+#define UART_PUT_LCR(p, c) outb(c,((p)->membase+UART_LCR))
-+#define UART_PUT_FCR(p, c) outb(c,((p)->membase+UART_FCR)) // fifo control
-+#define UART_GET_DIV_HI(p) inb(((p)->membase+UART_DLM))
-+#define UART_PUT_DIV_HI(p, c) outb(c,((p)->membase+UART_DLM))
-+#define UART_GET_DIV_LO(p) inb(((p)->membase+UART_DLL))
-+#define UART_PUT_DIV_LO(p, c) outb(c,((p)->membase+UART_DLL))
-+#define UART_PUT_MDR(p, c) outb(c,UART_MDR((p)->membase))
-+#define UART_RX_DATA(s) ((s) & UART_LSR_DR)
-+#define UART_TX_READY(s) ((s) & UART_LSR_THRE)
-+
-+static void it8712_stop_tx(struct uart_port *port, u_int from_tty)
-+{
-+ unsigned int reg;
-+
-+// printk("it8712 stop tx : \n");
-+ reg = UART_GET_IER(port);
-+ reg &= ~(UART_IER_THRI);
-+ UART_PUT_IER(port, reg);
-+}
-+
-+static void it8712_stop_rx(struct uart_port *port)
-+{
-+ unsigned int reg;
-+
-+// printk("it8712 stop rx : \n");
-+ reg = UART_GET_IER(port);
-+ reg &= ~(UART_IER_RDI);
-+ UART_PUT_IER(port, reg);
-+
-+}
-+
-+static void it8712_enable_ms(struct uart_port *port)
-+{
-+ unsigned int reg;
-+
-+// printk("it8712 enable ms : \n");
-+
-+ reg = UART_GET_IER(port);
-+ reg |= (UART_IER_MSI);
-+ UART_PUT_IER(port, reg);
-+
-+}
-+
-+static void
-+it8712_rx_chars(struct uart_info *info, struct pt_regs *regs)
-+{
-+ struct tty_struct *tty = info->tty;
-+ unsigned int status, mask, ch, flg, ignored = 0;
-+ struct uart_port *port = info->port;
-+
-+ // printk("it8712_rx_chars : \n");
-+ status = UART_GET_LSR(port);
-+ while (UART_RX_DATA(status)) {
-+
-+ /*
-+ * We need to read rds before reading the
-+ * character from the fifo
-+ */
-+ ch = UART_GET_CHAR(port);
-+ port->icount.rx++;
-+
-+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-+ goto ignore_char;
-+
-+ flg = TTY_NORMAL;
-+
-+ /*
-+ * Note that the error handling code is
-+ * out of the main execution path
-+ */
-+
-+ if (status & (UART_LSR_OE|UART_LSR_PE|UART_LSR_FE|UART_LSR_BI|UART_LSR_DE))
-+ goto handle_error;
-+ if (uart_handle_sysrq_char(info, ch, regs))
-+ goto ignore_char;
-+
-+ error_return:
-+ *tty->flip.flag_buf_ptr++ = flg;
-+ *tty->flip.char_buf_ptr++ = ch;
-+ tty->flip.count++;
-+ ignore_char:
-+ status = UART_GET_LSR(port);
-+ } // end of while
-+out:
-+ tty_flip_buffer_push(tty);
-+ return;
-+
-+handle_error:
-+ if (status & UART_LSR_BI) {
-+ status &= ~(UART_LSR_FE);
-+ port->icount.brk++;
-+
-+#ifdef SUPPORT_SYSRQ
-+ if (uart_handle_break(info, &it8712_console))
-+ goto ignore_char;
-+#endif
-+ } else if (status & UART_LSR_PE)
-+ port->icount.parity++;
-+ else if (status & UART_LSR_FE)
-+ port->icount.frame++;
-+
-+ if (status & UART_LSR_OE)
-+ port->icount.overrun++;
-+
-+ if (status & port->ignore_status_mask) {
-+ if (++ignored > 100)
-+ goto out;
-+ goto ignore_char;
-+ }
-+
-+ mask = status & port->read_status_mask;
-+
-+ if (mask & UART_LSR_BI)
-+ flg = TTY_BREAK;
-+ else if (mask & UART_LSR_PE)
-+ flg = TTY_PARITY;
-+ else if (mask & UART_LSR_FE)
-+ flg = TTY_FRAME;
-+
-+ if (status & UART_LSR_OE) {
-+ /*
-+ * CHECK: does overrun affect the current character?
-+ * ASSUMPTION: it does not.
-+ */
-+ *tty->flip.flag_buf_ptr++ = flg;
-+ *tty->flip.char_buf_ptr++ = ch;
-+ tty->flip.count++;
-+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-+ goto ignore_char;
-+ ch = 0;
-+ flg = TTY_OVERRUN;
-+ }
-+#ifdef SUPPORT_SYSRQ
-+ info->sysrq = 0;
-+#endif
-+ goto error_return;
-+}
-+
-+static void it8712_tx_chars(struct uart_info *info)
-+{
-+ int count;
-+ struct uart_port *port=info->port;
-+
-+ if (port->x_char) {
-+ while(!(UART_GET_LSR(port)&UART_LSR_THRE));
-+ UART_PUT_CHAR(port, port->x_char);
-+ port->icount.tx++;
-+ port->x_char = 0;
-+
-+ return;
-+ }
-+ if (info->xmit.head == info->xmit.tail
-+ || info->tty->stopped
-+ || info->tty->hw_stopped) {
-+ it8712_stop_tx(info->port, 0);
-+ return;
-+ }
-+
-+ count = port->fifosize >> 1;
-+ do {
-+ while(!(UART_GET_LSR(port)&UART_LSR_THRE));
-+ UART_PUT_CHAR(port, info->xmit.buf[info->xmit.tail]);
-+ info->xmit.tail = (info->xmit.tail + 1) & (UART_XMIT_SIZE - 1);
-+ port->icount.tx++;
-+ if (info->xmit.head == info->xmit.tail)
-+ break;
-+ } while (--count > 0);
-+
-+ if (CIRC_CNT(info->xmit.head,
-+ info->xmit.tail,
-+ UART_XMIT_SIZE) < WAKEUP_CHARS)
-+ uart_event(info, EVT_WRITE_WAKEUP);
-+
-+ if (info->xmit.head == info->xmit.tail)
-+ it8712_stop_tx(info->port, 0);
-+}
-+
-+static void it8712_start_tx(struct uart_port *port, u_int nonempty, u_int from_tty)
-+{
-+ unsigned int reg;
-+ struct uart_info *info=(struct uart_info*)(port->iobase);
-+
-+// printk("it8712 start tx : \n");
-+ reg = UART_GET_IER(port);
-+ reg |= (UART_IER_THRI);
-+ UART_PUT_IER(port, reg);
-+ it8712_tx_chars(info);
-+}
-+
-+static void it8712_modem_status(struct uart_info *info)
-+{
-+ unsigned int status;
-+ struct uart_icount *icount = &info->port->icount;
-+
-+// printk("it8712 modem status : \n");
-+
-+ status = UART_GET_MSR(info->port);
-+
-+ if (!(status & (UART_MSR_DCTS | UART_MSR_DDSR |
-+ UART_MSR_TERI | UART_MSR_DDCD)))
-+ return;
-+
-+ if (status & UART_MSR_DCD) {
-+ icount->dcd++;
-+#ifdef CONFIG_HARD_PPS
-+ if ((info->flags & ASYNC_HARDPPS_CD) &&
-+ (status & UART_MSR_DCD_MSK))
-+ hardpps();
-+#endif
-+ if (info->flags & ASYNC_CHECK_CD) {
-+ if (status & UART_MSR_DCD)
-+ wake_up_interruptible(&info->open_wait);
-+ else if (!((info->flags & ASYNC_CALLOUT_ACTIVE) &&
-+ (info->flags & ASYNC_CALLOUT_NOHUP))) {
-+ if (info->tty)
-+ tty_hangup(info->tty);
-+ }
-+ }
-+ }
-+
-+ if (status & UART_MSR_DDSR)
-+ icount->dsr++;
-+
-+ if (status & UART_MSR_DCTS) {
-+ icount->cts++;
-+
-+ if (info->flags & ASYNC_CTS_FLOW) {
-+ status &= UART_MSR_CTS;
-+
-+ if (info->tty->hw_stopped) {
-+ if (status) {
-+ info->tty->hw_stopped = 0;
-+ info->ops->start_tx(info->port, 1, 0);
-+ uart_event(info, EVT_WRITE_WAKEUP);
-+ }
-+ } else {
-+ if (!status) {
-+ info->tty->hw_stopped = 1;
-+ info->ops->stop_tx(info->port, 0);
-+ }
-+ }
-+ }
-+ }
-+ wake_up_interruptible(&info->delta_msr_wait);
-+
-+}
-+
-+static void it8712_int(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+ struct uart_info *info = dev_id;
-+ unsigned int status, pass_counter = 0;
-+
-+ status = UART_GET_INT_STATUS(info->port);
-+ do {
-+// printk("it8712_int: status %x \n", status);
-+ switch(status)
-+ {
-+ case UART_IIR_RDI:
-+ case UART_IIR_RLSI:
-+ case UART_IIR_RCTO:
-+ it8712_rx_chars(info, regs);
-+ break;
-+ case UART_IIR_THRI:
-+ it8712_tx_chars(info);
-+ break;
-+ case UART_IIR_MSI:
-+ it8712_modem_status(info);
-+ break;
-+ default:
-+ break;
-+ }
-+ if (pass_counter++ > IT8712_ISR_PASS_LIMIT)
-+ break;
-+
-+ status = UART_GET_INT_STATUS(info->port);
-+ } while (status);
-+}
-+
-+static u_int it8712_tx_empty(struct uart_port *port)
-+{
-+// printk("it8712 tx empty : \n");
-+
-+ return ((UART_GET_LSR(port) & UART_LSR_THRE)? TIOCSER_TEMT : 0);
-+}
-+
-+static u_int it8712_get_mctrl(struct uart_port *port)
-+{
-+ unsigned int result = 0;
-+ unsigned int status;
-+
-+// printk("it8712 get mctrl : \n");
-+
-+ status = UART_GET_MSR(port);
-+ if (status & UART_MSR_DCD)
-+ result |= TIOCM_CAR;
-+ if (status & UART_MSR_DSR)
-+ result |= TIOCM_DSR;
-+ if (status & UART_MSR_CTS)
-+ result |= TIOCM_CTS;
-+ if (status & UART_MSR_RI)
-+ result |= TIOCM_RI;
-+
-+ return result;
-+}
-+
-+static void it8712_set_mctrl_null(struct uart_port *port, u_int mctrl)
-+{
-+}
-+
-+static void it8712_break_ctl(struct uart_port *port, int break_state)
-+{
-+ unsigned int lcr;
-+
-+// printk("it8712 break ctl : \n");
-+
-+ lcr = UART_GET_LCR(port);
-+ if (break_state == -1)
-+ lcr |= UART_LCR_SBC;
-+ else
-+ lcr &= ~UART_LCR_SBC;
-+ UART_PUT_LCR(port, lcr);
-+}
-+
-+static inline u_int uart_calculate_quot(struct uart_info *info, u_int baud)
-+{
-+ u_int quot;
-+
-+ /* Special case: B0 rate */
-+ if (!baud)
-+ baud = 9600;
-+
-+ quot = (info->port->uartclk/(16 * baud)) ;
-+
-+ return quot;
-+}
-+static void it8712_change_speed(struct uart_port *port, u_int cflag, u_int iflag, u_int quot)
-+{
-+ u_int uart_mc=0, old_ier;
-+ unsigned long flags;
-+
-+#ifdef DEBUG
-+ printk("it8712_set_cflag(0x%x) called\n", cflag);
-+#endif
-+
-+
-+ /* byte size and parity */
-+ switch (cflag & CSIZE) {
-+ case CS5: uart_mc = UART_LCR_WLEN5; break;
-+ case CS6: uart_mc = UART_LCR_WLEN6; break;
-+ case CS7: uart_mc = UART_LCR_WLEN7; break;
-+ default: uart_mc = UART_LCR_WLEN8; break; // CS8
-+ }
-+ if (cflag & CSTOPB)
-+ uart_mc|= UART_LCR_STOP;
-+ if (cflag & PARENB) {
-+ uart_mc |= UART_LCR_EVEN;
-+ if (!(cflag & PARODD))
-+ uart_mc |= UART_LCR_ODD;
-+ }
-+
-+ port->read_status_mask = UART_LSR_OE;
-+ if (iflag & INPCK)
-+ port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
-+ if (iflag & (BRKINT | PARMRK))
-+ port->read_status_mask |= UART_LSR_BI;
-+
-+ /*
-+ * Characters to ignore
-+ */
-+ port->ignore_status_mask = 0;
-+ if (iflag & IGNPAR)
-+ port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE;
-+ if (iflag & IGNBRK) {
-+ port->ignore_status_mask |= UART_LSR_BI;
-+ /*
-+ * If we're ignoring parity and break indicators,
-+ * ignore overruns to (for real raw support).
-+ */
-+ if (iflag & IGNPAR)
-+ port->ignore_status_mask |= UART_LSR_OE;
-+ }
-+
-+ /* first, disable everything */
-+ save_flags(flags); cli();
-+ old_ier = UART_GET_IER(port);
-+
-+ if ((port->flags & ASYNC_HARDPPS_CD) ||
-+ (cflag & CRTSCTS) || !(cflag & CLOCAL))
-+ old_ier |= UART_IER_MSI;
-+
-+ /* Set baud rate */
-+ quot = quot / 13;
-+ UART_PUT_LCR(port, UART_LCR_DLAB);
-+ UART_PUT_DIV_LO(port, (quot & 0xff));
-+ UART_PUT_DIV_HI(port, ((quot & 0xf00) >> 8));
-+
-+ UART_PUT_LCR(port, uart_mc);
-+// UART_PUT_LCR(port, 0x07); // ???? it is wired
-+ UART_PUT_MCR(port, 0x08);
-+ UART_PUT_FCR(port, 0x01);
-+ UART_PUT_IER(port, 0x05);
-+
-+ restore_flags(flags);
-+}
-+
-+static int it8712_startup(struct uart_port *port, struct uart_info *info)
-+{
-+ int retval;
-+ unsigned int regs;
-+
-+// printk("it8712 startup : \n");
-+
-+ /*
-+ * Use iobase to store a pointer to info. We need this to start a
-+ * transmission as the tranmittr interrupt is only generated on
-+ * the transition to the idle state
-+ */
-+
-+ port->iobase=(u_int)info;
-+
-+ /*
-+ * Allocate the IRQ
-+ */
-+ retval = request_irq(port->irq, it8712_int, SA_INTERRUPT, "it8712", info);
-+ if (retval)
-+ return retval;
-+
-+ /* setup interrupt controller */
-+ regs = *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+ regs |= (IRQ_SERIRQ0_MASK);
-+ *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
-+ regs = *((volatile unsigned int *)IRQ_LEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+ regs &= ~(IRQ_SERIRQ0_MASK);
-+ *((volatile unsigned int *)IRQ_LEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
-+ *((volatile unsigned int *)IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_SERIRQ0_MASK);
-+
-+ /*
-+ * Finally, enable interrupts. Use the TII interrupt to minimise
-+ * the number of interrupts generated. If higher performance is
-+ * needed, consider using the TI interrupt with a suitable FIFO
-+ * threshold
-+ */
-+ UART_PUT_IER(port, (UART_IER_RDI|UART_IER_THRI));
-+
-+ return 0;
-+}
-+
-+static void it8712_shutdown(struct uart_port *port, struct uart_info *info)
-+{
-+// printk("it8712 shutdown : \n");
-+
-+ /*
-+ * disable all interrupts, disable the port
-+ */
-+ UART_PUT_IER(port, 0x0);
-+
-+ /* disable break condition and fifos */
-+// UART_PUT_MCR(port, (UART_GET_MCR(port)&UART_MCR_MASK));
-+
-+ /*
-+ * Free the interrupt
-+ */
-+ free_irq(port->irq, info);
-+}
-+
-+static const char *it8712_type(struct uart_port *port)
-+{
-+ return port->type == PORT_IT8712 ? "IT8712" : NULL;
-+}
-+
-+/*
-+ * Release the memory region(s) being used by 'port'
-+ */
-+static void it8712_release_port(struct uart_port *port)
-+{
-+// printk("it8712 release port : \n");
-+
-+ release_mem_region(port->mapbase, UART_PORT_SIZE);
-+}
-+
-+/*
-+ * Request the memory region(s) being used by 'port'
-+ */
-+static int it8712_request_port(struct uart_port *port)
-+{
-+ return request_mem_region(port->mapbase, UART_PORT_SIZE,
-+ "serial_it8712") != NULL ? 0 : -EBUSY;
-+}
-+
-+/*
-+ * Configure/autoconfigure the port.
-+ */
-+static void it8712_config_port(struct uart_port *port, int flags)
-+{
-+
-+ if (flags & UART_CONFIG_TYPE) {
-+ if (it8712_request_port(port) == 0)
-+ port->type = PORT_IT8712;
-+ }
-+}
-+
-+/*
-+ * verify the new serial_struct (for TIOCSSERIAL).
-+ */
-+static int it8712_verify_port(struct uart_port *port, struct serial_struct *ser)
-+{
-+ int ret = 0;
-+
-+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_UART00)
-+ ret = -EINVAL;
-+ if (ser->irq < 0 || ser->irq >= NR_IRQS)
-+ ret = -EINVAL;
-+ if (ser->baud_base < 9600)
-+ ret = -EINVAL;
-+ return ret;
-+}
-+
-+static struct uart_ops it8712_pops = {
-+ tx_empty: it8712_tx_empty,
-+ set_mctrl: it8712_set_mctrl_null,
-+ get_mctrl: it8712_get_mctrl,
-+ stop_tx: it8712_stop_tx,
-+ start_tx: it8712_start_tx,
-+ stop_rx: it8712_stop_rx,
-+ enable_ms: it8712_enable_ms,
-+ break_ctl: it8712_break_ctl,
-+ startup: it8712_startup,
-+ shutdown: it8712_shutdown,
-+ change_speed: it8712_change_speed,
-+ type: it8712_type,
-+ release_port: it8712_release_port,
-+ request_port: it8712_request_port,
-+ config_port: it8712_config_port,
-+ verify_port: it8712_verify_port,
-+};
-+
-+#ifdef CONFIG_ARCH_SL2312
-+
-+static struct uart_port it8712_ports[UART_NR] = {
-+ {
-+ membase: (void *)0,
-+ mapbase: 0,
-+ iotype: SERIAL_IO_MEM,
-+ irq: 0,
-+ uartclk: UART_CLK/2,
-+ fifosize: 16,
-+ ops: &it8712_pops,
-+ flags: ASYNC_BOOT_AUTOCONF,
-+ }
-+};
-+
-+#endif
-+
-+#ifdef CONFIG_SERIAL_IT8712_CONSOLE
-+#ifdef used_and_not_const_char_pointer
-+static int it8712_console_read(struct uart_port *port, char *s, u_int count)
-+{
-+ unsigned int status;
-+ int c;
-+#ifdef DEBUG
-+ printk("it8712_console_read() called\n");
-+#endif
-+
-+ c = 0;
-+ while (c < count) {
-+ status = UART_GET_LSR(port);
-+ if (UART_RX_DATA(status)) {
-+ *s++ = UART_GET_CHAR(port);
-+ c++;
-+ } else {
-+ // nothing more to get, return
-+ return c;
-+ }
-+ }
-+ // return the count
-+ return c;
-+}
-+#endif
-+static void it8712_console_write(struct console *co, const char *s, unsigned count)
-+{
-+#ifdef CONFIG_ARCH_SL2312
-+ struct uart_port *port = it8712_ports + co->index;
-+ unsigned int status, old_ies;
-+ int i;
-+
-+ /*
-+ * First save the CR then disable the interrupts
-+ */
-+ old_ies = UART_GET_IER(port);
-+ UART_PUT_IER(port,0x0);
-+
-+ /*
-+ * Now, do each character
-+ */
-+ for (i = 0; i < count; i++) {
-+ do {
-+ status = UART_GET_LSR(port);
-+ } while (!UART_TX_READY(status));
-+ UART_PUT_CHAR(port, s[i]);
-+ if (s[i] == '\n') {
-+ do {
-+ status = UART_GET_LSR(port);
-+ } while (!UART_TX_READY(status));
-+ UART_PUT_CHAR(port, '\r');
-+ }
-+ }
-+
-+ /*
-+ * Finally, wait for transmitter to become empty
-+ * and restore the IES
-+ */
-+ do {
-+ status = UART_GET_LSR(port);
-+ } while (!(status&UART_LSR_THRE));
-+ UART_PUT_IER(port, old_ies);
-+#endif
-+}
-+
-+static kdev_t it8712_console_device(struct console *co)
-+{
-+ return MKDEV(SERIAL_IT8712_MAJOR, SERIAL_IT8712_MINOR + co->index);
-+}
-+
-+static int it8712_console_wait_key(struct console *co)
-+{
-+#ifdef CONFIG_ARCH_SL2312
-+ struct uart_port *port = (it8712_ports + co->index);
-+ unsigned int status;
-+
-+ do {
-+ status = UART_GET_LSR(port);
-+ } while (!UART_RX_DATA(status));
-+ return UART_GET_CHAR(port);
-+#else
-+ return 0;
-+#endif
-+}
-+
-+static void /*__init*/ it8712_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
-+{
-+ printk("it8712 console get options : \n");
-+
-+ u_int uart_mc, quot;
-+ uart_mc= UART_GET_MCR(port);
-+
-+ *parity = 'n';
-+ if (uart_mc & UART_LCR_PARITY) {
-+ if (uart_mc & UART_LCR_EVEN)
-+ *parity = 'e';
-+ else
-+ *parity = 'o';
-+ }
-+
-+ switch (uart_mc & UART_LCR_MSK){
-+
-+ case UART_LCR_WLEN5:
-+ *bits = 5;
-+ break;
-+ case UART_LCR_WLEN6:
-+ *bits = 6;
-+ break;
-+ case UART_LCR_WLEN7:
-+ *bits = 7;
-+ break;
-+ case UART_LCR_WLEN8:
-+ *bits = 8;
-+ break;
-+ }
-+ UART_PUT_MCR(port,UART_LCR_DLAB);
-+ quot = UART_GET_DIV_LO(port) | (UART_GET_DIV_HI(port) << 8);
-+ UART_PUT_MCR(port,uart_mc);
-+ *baud = (port->uartclk / (16 *quot));
-+}
-+
-+static int __init it8712_console_setup(struct console *co, char *options)
-+{
-+ struct uart_port *port;
-+ int baud = 38400;
-+ int bits = 8;
-+ int parity = 'n';
-+ int flow= 'n';
-+ int base, irq;
-+ int i ;
-+
-+// printk("it8712 console setup : \n");
-+
-+ LPCSetConfig(0, 0x02, 0x01);
-+ LPCSetConfig(LDN_SERIAL1, 0x30, 0x1);
-+ LPCSetConfig(LDN_SERIAL1, 0x23, 0x0);
-+ base = IT8712_IO_BASE;
-+ base += ((LPCGetConfig(LDN_SERIAL1, 0x60) << 8) + LPCGetConfig(LDN_SERIAL1, 0x61));
-+ it8712_ports[0].mapbase = base;
-+ it8712_ports[0].membase = IO_ADDRESS(base);
-+ it8712_ports[0].irq = IRQ_SERIRQ0_OFFSET;
-+ irq = LPCGetConfig(LDN_SERIAL1, 0x70);
-+ it8712_ports[0].irq += irq;
-+
-+ printk("it8712 irq is %x %x \n", it8712_ports[0].irq, irq);
-+
-+ // setup LPC Host 'quiet mode'
-+ *((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) |= LPC_HOST_CONTINUE_MODE ;
-+ for(i=0;i<1000;i++) ; // delay
-+ *((volatile unsigned int *)IO_ADDRESS((SL2312_LPC_HOST_BASE+0x04))) &= ~(LPC_HOST_CONTINUE_MODE) ;
-+
-+#ifdef CONFIG_ARCH_SL2312
-+ /*
-+ * Check whether an invalid uart number has been specified, and
-+ * if so, search for the first available port that does have
-+ * console support.
-+ */
-+ port = uart_get_console(it8712_ports,IT8712_NO_PORTS,co);
-+#else
-+ return -ENODEV;
-+#endif
-+
-+ if (options)
-+ uart_parse_options(options, &baud, &parity, &bits, &flow);
-+ else
-+ it8712_console_get_options(port, &baud, &parity, &bits);
-+
-+ return uart_set_options(port, co, baud, parity, bits, flow);
-+}
-+
-+static struct console it8712_console = {
-+ name: SERIAL_IT8712_NAME,
-+ write: it8712_console_write,
-+#ifdef used_and_not_const_char_pointer
-+ read: it8712_console_read,
-+#endif
-+ device: it8712_console_device,
-+// wait_key: it8712_console_wait_key,
-+ setup: it8712_console_setup,
-+ flags: (CON_PRINTBUFFER|CON_ENABLED),
-+ index: -1,
-+};
-+
-+void __init it8712_console_init(void)
-+{
-+ register_console(&it8712_console);
-+}
-+
-+#define IT8712_CONSOLE &it8712_console
-+#else
-+#define IT8712_CONSOLE NULL
-+#endif
-+
-+static struct uart_driver it8712_reg = {
-+ owner: NULL,
-+ normal_major: SERIAL_IT8712_MAJOR,
-+ normal_name: SERIAL_IT8712_NAME,
-+ normal_driver: &normal,
-+ callout_major: CALLOUT_IT8712_MAJOR,
-+ callout_name: CALLOUT_IT8712_NAME,
-+ callout_driver: &callout,
-+ table: it8712_table,
-+ termios: it8712_termios,
-+ termios_locked: it8712_termios_locked,
-+ minor: SERIAL_IT8712_MINOR,
-+ nr: UART_NR,
-+#ifdef CONFIG_ARCH_SL2312
-+ port: it8712_ports,
-+#endif
-+ state: NULL,
-+ cons: IT8712_CONSOLE,
-+};
-+
-+static int __init it8712_init(void)
-+{
-+// printk("serial_it8712: it871212_init \n");
-+
-+ return uart_register_driver(&it8712_reg);
-+}
-+
-+
-+__initcall(it8712_init);
---- /dev/null
-+++ b/drivers/serial/serial_sl2312.c
-@@ -0,0 +1,827 @@
-+/*
-+ * linux/drivers/char/serial_uart00.c
-+ *
-+ * Driver for UART00 serial ports
-+ *
-+ * Based on drivers/char/serial_amba.c, by ARM Limited &
-+ * Deep Blue Solutions Ltd.
-+ * Copyright 2001 Altera Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ * $Id: serial_sl2312.c,v 1.1.1.1 2006/04/03 08:41:00 amos_lee Exp $
-+ *
-+ */
-+#include <linux/module.h>
-+
-+#include <linux/errno.h>
-+#include <linux/signal.h>
-+#include <linux/sched.h>
-+#include <linux/interrupt.h>
-+#include <linux/tty.h>
-+#include <linux/tty_flip.h>
-+#include <linux/major.h>
-+#include <linux/string.h>
-+#include <linux/fcntl.h>
-+#include <linux/ptrace.h>
-+#include <linux/ioport.h>
-+#include <linux/mm.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/circ_buf.h>
-+#include <linux/serial.h>
-+#include <linux/console.h>
-+#include <linux/sysrq.h>
-+#include <linux/serial_core.h>
-+
-+#include <asm/system.h>
-+#include <asm/hardware.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/uaccess.h>
-+#include <asm/bitops.h>
-+#include <asm/sizes.h>
-+#include <linux/spinlock.h>
-+#include <linux/irq.h>
-+
-+
-+#if defined(CONFIG_SERIAL_SL2312_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-+#define SUPPORT_SYSRQ
-+#endif
-+
-+#include <asm/arch/sl2312.h>
-+#define UART_TYPE (volatile unsigned int*)
-+#include <asm/arch/uart.h>
-+#include <asm/arch/int_ctrl.h>
-+
-+// #define DEBUG 1
-+#define UART_NR 1
-+
-+
-+#define SERIAL_SL2312_NAME "ttyS"
-+#define SERIAL_SL2312_MAJOR 204
-+#define SERIAL_SL2312_MINOR 40 /* Temporary - will change in future */
-+#define SERIAL_SL2312_NR UART_NR
-+#define UART_PORT_SIZE 0x50
-+
-+#define SL2312_NO_PORTS UART_NR
-+#define SL2312_ISR_PASS_LIMIT 256
-+
-+/*
-+ * Access macros for the SL2312 UARTs
-+ */
-+#define UART_GET_INT_STATUS(p) (inl(UART_IIR((p)->membase)) & 0x0F) // interrupt identification
-+#define UART_PUT_IER(p, c) outl(c,UART_IER((p)->membase)) // interrupt enable
-+#define UART_GET_IER(p) inl(UART_IER((p)->membase))
-+#define UART_PUT_CHAR(p, c) outl(c,UART_THR((p)->membase)) // transmitter holding
-+#define UART_GET_CHAR(p) inl(UART_RBR((p)->membase)) // receive buffer
-+#define UART_GET_LSR(p) inl(UART_LSR((p)->membase)) // line status
-+#define UART_GET_MSR(p) inl(UART_MSR((p)->membase)) // modem status
-+#define UART_GET_MCR(p) inl(UART_MCR((p)->membase)) // modem control
-+#define UART_PUT_MCR(p, c) outl(c,UART_MCR((p)->membase))
-+#define UART_GET_LCR(p) inl(UART_LCR((p)->membase)) // mode control
-+#define UART_PUT_LCR(p, c) outl(c,UART_LCR((p)->membase))
-+#define UART_GET_DIV_HI(p) inl(UART_DIV_HI((p)->membase))
-+#define UART_PUT_DIV_HI(p, c) outl(c,UART_DIV_HI((p)->membase))
-+#define UART_GET_DIV_LO(p) inl(UART_DIV_LO((p)->membase))
-+#define UART_PUT_DIV_LO(p, c) outl(c,UART_DIV_LO((p)->membase))
-+#define UART_PUT_MDR(p, c) outl(c,UART_MDR((p)->membase))
-+#define UART_RX_DATA(s) ((s) & UART_LSR_DR)
-+#define UART_TX_READY(s) ((s) & UART_LSR_THRE)
-+
-+
-+static void sl2312_stop_tx(struct uart_port *port)
-+{
-+ unsigned int reg;
-+
-+// printk("sl2312 stop tx : \n");
-+ reg = UART_GET_IER(port);
-+ reg &= ~(UART_IER_TE);
-+ UART_PUT_IER(port, reg);
-+}
-+
-+static void sl2312_stop_rx(struct uart_port *port)
-+{
-+ unsigned int reg;
-+
-+// printk("sl2312 stop rx : \n");
-+ reg = UART_GET_IER(port);
-+ reg &= ~(UART_IER_DR);
-+ UART_PUT_IER(port, reg);
-+
-+}
-+
-+static void sl2312_enable_ms(struct uart_port *port)
-+{
-+ unsigned int reg;
-+
-+// printk("sl2312 enable ms : \n");
-+
-+ reg = UART_GET_IER(port);
-+ reg |= (UART_IER_MS);
-+ UART_PUT_IER(port, reg);
-+
-+}
-+
-+static void
-+sl2312_rx_chars(struct uart_port *port)
-+{
-+ struct tty_struct *tty = port->info->tty;
-+ unsigned int status, mask, ch, flg, ignored = 0;
-+
-+
-+ // printk("sl2312_rx_chars : \n");
-+ status = UART_GET_LSR(port);
-+ while (UART_RX_DATA(status)) {
-+
-+ /*
-+ * We need to read rds before reading the
-+ * character from the fifo
-+ */
-+ ch = UART_GET_CHAR(port);
-+ port->icount.rx++;
-+
-+ //if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-+ if (tty && !tty_buffer_request_room(tty, 1))
-+ goto ignore_char;
-+
-+ flg = TTY_NORMAL;
-+
-+ /*
-+ * Note that the error handling code is
-+ * out of the main execution path
-+ */
-+
-+ if (status & (UART_LSR_OE|UART_LSR_PE|UART_LSR_FE|UART_LSR_BI|UART_LSR_DE))
-+ goto handle_error;
-+ if (uart_handle_sysrq_char(port, ch))
-+ goto ignore_char;
-+
-+ error_return:
-+ //*tty->flip.flag_buf_ptr++ = flg;
-+ //*tty->flip.char_buf_ptr++ = ch;
-+ //tty->flip.count++;
-+ tty_insert_flip_char(tty, ch, flg);
-+ ignore_char:
-+ status = UART_GET_LSR(port);
-+ } // end of while
-+out:
-+ tty_flip_buffer_push(tty);
-+ return;
-+
-+handle_error:
-+ if (status & UART_LSR_BI) {
-+ status &= ~(UART_LSR_FE);
-+ port->icount.brk++;
-+
-+#ifdef SUPPORT_SYSRQ
-+ if (uart_handle_break(port))
-+ goto ignore_char;
-+#endif
-+ } else if (status & UART_LSR_PE)
-+ port->icount.parity++;
-+ else if (status & UART_LSR_FE)
-+ port->icount.frame++;
-+
-+ if (status & UART_LSR_OE)
-+ port->icount.overrun++;
-+
-+ if (status & port->ignore_status_mask) {
-+ if (++ignored > 100)
-+ goto out;
-+ goto ignore_char;
-+ }
-+
-+ mask = status & port->read_status_mask;
-+
-+ if (mask & UART_LSR_BI)
-+ flg = TTY_BREAK;
-+ else if (mask & UART_LSR_PE)
-+ flg = TTY_PARITY;
-+ else if (mask & UART_LSR_FE)
-+ flg = TTY_FRAME;
-+
-+ if (status & UART_LSR_OE) {
-+ /*
-+ * CHECK: does overrun affect the current character?
-+ * ASSUMPTION: it does not.
-+ */
-+ //*tty->flip.flag_buf_ptr++ = flg;
-+ //*tty->flip.char_buf_ptr++ = ch;
-+ //tty->flip.count++;
-+
-+ tty_insert_flip_char(tty, 0, TTY_BREAK);
-+
-+ // if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-+ if (tty_buffer_request_room(tty, 1))
-+ goto ignore_char;
-+ ch = 0;
-+ flg = TTY_OVERRUN;
-+ }
-+#ifdef SUPPORT_SYSRQ
-+ port->sysrq = 0;
-+#endif
-+ goto error_return;
-+}
-+
-+static void sl2312_tx_chars(struct uart_port *port)
-+{
-+ struct circ_buf *xmit = &port->info->xmit;
-+ int count;
-+
-+
-+ if (port->x_char) {
-+ while(!(UART_GET_LSR(port)&UART_LSR_THRE));
-+ UART_PUT_CHAR(port, port->x_char);
-+ port->icount.tx++;
-+ port->x_char = 0;
-+
-+ return;
-+ }
-+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
-+ sl2312_stop_tx(port);
-+
-+ return;
-+ }
-+
-+ count = port->fifosize >> 1;
-+ do {
-+ while(!(UART_GET_LSR(port)&UART_LSR_THRE));
-+ UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
-+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-+ port->icount.tx++;
-+ if (uart_circ_empty(xmit))
-+ break;
-+ } while (--count > 0);
-+
-+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-+ uart_write_wakeup(port);
-+
-+ if (uart_circ_empty(xmit))
-+ sl2312_stop_tx(port);
-+
-+}
-+
-+static void sl2312_start_tx(struct uart_port *port)
-+{
-+ unsigned int reg;
-+
-+// printk("sl2312 start tx : \n");
-+ reg = UART_GET_IER(port);
-+ reg |= (UART_IER_TE);
-+ UART_PUT_IER(port, reg);
-+
-+ sl2312_tx_chars(port);
-+}
-+
-+static void sl2312_modem_status(struct uart_port *port)
-+{
-+ unsigned int status;
-+
-+// printk("it8712 modem status : \n");
-+
-+ status = UART_GET_MSR(port);
-+
-+ if (!(status & (UART_MSR_DCTS | UART_MSR_DDSR |
-+ UART_MSR_TERI | UART_MSR_DDCD)))
-+ return;
-+
-+ if (status & UART_MSR_DDCD)
-+ uart_handle_dcd_change(port, status & UART_MSR_DCD);
-+
-+ if (status & UART_MSR_DDSR)
-+ port->icount.dsr++;
-+
-+ if (status & UART_MSR_DCTS)
-+ uart_handle_cts_change(port, status & UART_MSR_CTS);
-+
-+ wake_up_interruptible(&port->info->delta_msr_wait);
-+
-+}
-+
-+static irqreturn_t sl2312_int(int irq, void *dev_id)
-+{
-+ struct uart_port *port = dev_id;
-+ unsigned int status, pass_counter = 0;
-+
-+ status = UART_GET_INT_STATUS(port);
-+ do {
-+ switch(status)
-+ {
-+ case UART_IIR_DR:
-+ case UART_IIR_RLS:
-+ sl2312_rx_chars(port);
-+ break;
-+ case UART_IIR_TE:
-+ sl2312_tx_chars(port);
-+ break;
-+ case UART_IIR_MODEM:
-+ sl2312_modem_status(port);
-+ break;
-+ default:
-+ break;
-+ }
-+ if (pass_counter++ > SL2312_ISR_PASS_LIMIT)
-+ break;
-+
-+ status = UART_GET_INT_STATUS(port);
-+ } while (status);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static u_int sl2312_tx_empty(struct uart_port *port)
-+{
-+// printk("sl2312 tx empty : \n");
-+
-+ return ((UART_GET_LSR(port) & UART_LSR_TE)? TIOCSER_TEMT : 0);
-+}
-+
-+static u_int sl2312_get_mctrl(struct uart_port *port)
-+{
-+ unsigned int result = 0;
-+ unsigned int status;
-+
-+// printk("sl2312 get mctrl : \n");
-+
-+ status = UART_GET_MSR(port);
-+ if (status & UART_MSR_DCD)
-+ result |= TIOCM_CAR;
-+ if (status & UART_MSR_DSR)
-+ result |= TIOCM_DSR;
-+ if (status & UART_MSR_CTS)
-+ result |= TIOCM_CTS;
-+ if (status & UART_MSR_RI)
-+ result |= TIOCM_RI;
-+
-+ return result;
-+}
-+
-+static void sl2312_set_mctrl_null(struct uart_port *port, u_int mctrl)
-+{
-+}
-+
-+static void sl2312_break_ctl(struct uart_port *port, int break_state)
-+{
-+ unsigned int lcr;
-+
-+// printk("sl2312 break ctl : \n");
-+
-+ lcr = UART_GET_LCR(port);
-+ if (break_state == -1)
-+ lcr |= UART_LCR_SETBREAK;
-+ else
-+ lcr &= ~UART_LCR_SETBREAK;
-+ UART_PUT_LCR(port, lcr);
-+}
-+
-+static inline u_int uart_calculate_quot(struct uart_port *port, u_int baud)
-+{
-+ u_int quot;
-+
-+ /* Special case: B0 rate */
-+ if (!baud)
-+ baud = 9600;
-+
-+ quot = (port->uartclk / (16 * baud)-1) ;
-+
-+ return quot;
-+}
-+
-+static void sl2312_set_termios(struct uart_port *port, struct ktermios *termios,
-+ struct ktermios *old)
-+{
-+ unsigned int uart_mc, old_ier, baud, quot;
-+ unsigned long flags;
-+
-+ termios->c_cflag |= CREAD;
-+#ifdef DEBUG
-+ printk("it8712_set_cflag(0x%x) called\n", cflag);
-+#endif
-+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-+ quot = (port->uartclk / (16 * baud)) ;
-+ //uart_get_divisor(port, baud);
-+
-+ /* byte size and parity */
-+ switch (termios->c_cflag & CSIZE) {
-+ case CS5:
-+ uart_mc = UART_LCR_LEN5;
-+ break;
-+ case CS6:
-+ uart_mc = UART_LCR_LEN6;
-+ break;
-+ case CS7:
-+ uart_mc = UART_LCR_LEN7;
-+ break;
-+ default: // CS8
-+ uart_mc = UART_LCR_LEN8;
-+ break;
-+ }
-+
-+ if (termios->c_cflag & CSTOPB)
-+ uart_mc|= UART_LCR_STOP;
-+ if (termios->c_cflag & PARENB) {
-+ uart_mc |= UART_LCR_EVEN;
-+ if (!(termios->c_cflag & PARODD))
-+ uart_mc |= UART_LCR_ODD;
-+ }
-+
-+ spin_lock_irqsave(&port->lock, flags);
-+ /*
-+ * Update the per-port timeout
-+ */
-+ uart_update_timeout(port, termios->c_cflag, baud);
-+ port->read_status_mask = UART_LSR_OE;
-+ if (termios->c_iflag & INPCK)
-+ port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
-+ if (termios->c_iflag & (BRKINT | PARMRK))
-+ port->read_status_mask |= UART_LSR_BI;
-+
-+ /*
-+ * Characters to ignore
-+ */
-+ port->ignore_status_mask = 0;
-+ if (termios->c_iflag & IGNPAR)
-+ port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE;
-+ if (termios->c_iflag & IGNBRK) {
-+ port->ignore_status_mask |= UART_LSR_BI;
-+ /*
-+ * If we're ignoring parity and break indicators,
-+ * ignore overruns to (for real raw support).
-+ */
-+ if (termios->c_iflag & IGNPAR)
-+ port->ignore_status_mask |= UART_LSR_OE;
-+ }
-+
-+ //save_flags(flags); cli();
-+ old_ier = UART_GET_IER(port);
-+
-+ if(UART_ENABLE_MS(port, termios->c_cflag))
-+ old_ier |= UART_IER_MS;
-+
-+ /* Set baud rate */
-+ UART_PUT_LCR(port, UART_LCR_DLAB);
-+ UART_PUT_DIV_LO(port, (quot & 0xff));
-+ UART_PUT_DIV_HI(port, ((quot & 0xf00) >> 8));
-+
-+ UART_PUT_LCR(port, uart_mc);
-+ UART_PUT_IER(port, old_ier);
-+
-+ //restore_flags(flags);
-+ spin_unlock_irqrestore(&port->lock, flags);
-+}
-+
-+
-+
-+static int sl2312_startup(struct uart_port *port)
-+{
-+ int retval;
-+ unsigned int regs;
-+
-+// printk("sl2312 startup : \n");
-+
-+ /*
-+ * Use iobase to store a pointer to info. We need this to start a
-+ * transmission as the tranmittr interrupt is only generated on
-+ * the transition to the idle state
-+ */
-+
-+ /*
-+ * Allocate the IRQ
-+ */
-+ retval = request_irq(port->irq, sl2312_int, IRQF_DISABLED, "sl2312", port);
-+ if (retval)
-+ return retval;
-+
-+ /* setup interrupt controller */
-+ regs = *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+ regs &= ~(IRQ_UART_MASK);
-+ *((volatile unsigned int *)IRQ_TMODE(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
-+ regs = *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE)));
-+ regs &= ~(IRQ_UART_MASK);
-+ *((volatile unsigned int *)IRQ_TLEVEL(IO_ADDRESS(SL2312_INTERRUPT_BASE))) = regs;
-+ *((volatile unsigned int *)IRQ_MASK(IO_ADDRESS(SL2312_INTERRUPT_BASE))) |= (unsigned int)(IRQ_UART_MASK);
-+
-+ /*
-+ * Finally, enable interrupts. Use the TII interrupt to minimise
-+ * the number of interrupts generated. If higher performance is
-+ * needed, consider using the TI interrupt with a suitable FIFO
-+ * threshold
-+ */
-+ UART_PUT_IER(port, (UART_IER_DR|UART_IER_TE));
-+
-+ return 0;
-+}
-+
-+static void sl2312_shutdown(struct uart_port *port)
-+{
-+// printk("sl2312 shutdown : \n");
-+
-+ /*
-+ * disable all interrupts, disable the port
-+ */
-+ UART_PUT_IER(port, 0x0);
-+
-+ /* disable break condition and fifos */
-+// UART_PUT_MCR(port, (UART_GET_MCR(port)&UART_MCR_MASK));
-+
-+ /*
-+ * Free the interrupt
-+ */
-+ free_irq(port->irq, port);
-+}
-+
-+static const char *sl2312_type(struct uart_port *port)
-+{
-+ return port->type == PORT_SL2312 ? "SL2312" : NULL;
-+}
-+
-+/*
-+ * Release the memory region(s) being used by 'port'
-+ */
-+static void sl2312_release_port(struct uart_port *port)
-+{
-+// printk("sl2312 release port : \n");
-+
-+ release_mem_region(port->mapbase, UART_PORT_SIZE);
-+}
-+
-+/*
-+ * Request the memory region(s) being used by 'port'
-+ */
-+static int sl2312_request_port(struct uart_port *port)
-+{
-+ return request_mem_region(port->mapbase, UART_PORT_SIZE,
-+ "serial_sl2312") != NULL ? 0 : -EBUSY;
-+}
-+
-+/*
-+ * Configure/autoconfigure the port.
-+ */
-+static void sl2312_config_port(struct uart_port *port, int flags)
-+{
-+
-+ if (flags & UART_CONFIG_TYPE) {
-+ if (sl2312_request_port(port) == 0)
-+ port->type = PORT_SL2312;
-+ }
-+}
-+
-+/*
-+ * verify the new serial_struct (for TIOCSSERIAL).
-+ */
-+static int sl2312_verify_port(struct uart_port *port, struct serial_struct *ser)
-+{
-+ int ret = 0;
-+
-+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_UART00)
-+ ret = -EINVAL;
-+ if (ser->irq < 0 || ser->irq >= NR_IRQS)
-+ ret = -EINVAL;
-+ if (ser->baud_base < 9600)
-+ ret = -EINVAL;
-+ return ret;
-+}
-+
-+static struct uart_ops sl2312_pops = {
-+ .tx_empty =sl2312_tx_empty,
-+ .set_mctrl =sl2312_set_mctrl_null,
-+ .get_mctrl =sl2312_get_mctrl,
-+ .stop_tx =sl2312_stop_tx,
-+ .start_tx =sl2312_start_tx,
-+ .stop_rx =sl2312_stop_rx,
-+ .enable_ms =sl2312_enable_ms,
-+ .break_ctl =sl2312_break_ctl,
-+ .startup =sl2312_startup,
-+ .shutdown =sl2312_shutdown,
-+ .set_termios =sl2312_set_termios,
-+ .type =sl2312_type,
-+ .release_port =sl2312_release_port,
-+ .request_port =sl2312_request_port,
-+ .config_port =sl2312_config_port,
-+ .verify_port =sl2312_verify_port,
-+};
-+
-+#ifdef CONFIG_ARCH_SL2312
-+
-+static struct uart_port sl2312_ports[UART_NR] = {
-+ {
-+ membase: (void *)IO_ADDRESS(SL2312_UART_BASE),
-+ mapbase: SL2312_UART_BASE,
-+ iotype: SERIAL_IO_MEM,
-+ irq: IRQ_UART,
-+ uartclk: UART_CLK,
-+ fifosize: 16,
-+ ops: &sl2312_pops,
-+ flags: ASYNC_BOOT_AUTOCONF,
-+ }
-+};
-+
-+#endif
-+
-+#ifdef CONFIG_SERIAL_SL2312_CONSOLE
-+#ifdef used_and_not_const_char_pointer
-+static int sl2312_console_read(struct uart_port *port, char *s, u_int count)
-+{
-+ unsigned int status;
-+ int c;
-+#ifdef DEBUG
-+ printk("sl2312_console_read() called\n");
-+#endif
-+
-+ c = 0;
-+ while (c < count) {
-+ status = UART_GET_LSR(port);
-+ if (UART_RX_DATA(status)) {
-+ *s++ = UART_GET_CHAR(port);
-+ c++;
-+ } else {
-+ // nothing more to get, return
-+ return c;
-+ }
-+ }
-+ // return the count
-+ return c;
-+}
-+#endif
-+static void sl2312_console_write(struct console *co, const char *s, unsigned count)
-+{
-+#ifdef CONFIG_ARCH_SL2312
-+ struct uart_port *port = sl2312_ports + co->index;
-+ unsigned int status, old_ies;
-+ int i;
-+
-+ /*
-+ * First save the CR then disable the interrupts
-+ */
-+ old_ies = UART_GET_IER(port);
-+ UART_PUT_IER(port,0x0);
-+
-+ /*
-+ * Now, do each character
-+ */
-+ for (i = 0; i < count; i++) {
-+ do {
-+ status = UART_GET_LSR(port);
-+ } while (!UART_TX_READY(status));
-+ UART_PUT_CHAR(port, s[i]);
-+ if (s[i] == '\n') {
-+ do {
-+ status = UART_GET_LSR(port);
-+ } while (!UART_TX_READY(status));
-+ UART_PUT_CHAR(port, '\r');
-+ }
-+ }
-+
-+ /*
-+ * Finally, wait for transmitter to become empty
-+ * and restore the IES
-+ */
-+ do {
-+ status = UART_GET_LSR(port);
-+ } while (!(status&UART_LSR_TE));
-+ UART_PUT_IER(port, old_ies);
-+#endif
-+}
-+
-+#if 0
-+static void sl2312_console_device(struct console *co,int *index)
-+{
-+
-+ struct uart_driver *p = co->data;
-+ *index = co->index;
-+ return p->tty_driver;
-+
-+}
-+#endif
-+
-+static void /*__init*/ sl2312_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits)
-+{
-+// printk("sl2312 console get options : \n");
-+
-+ u_int uart_mc, quot;
-+ uart_mc= UART_GET_MCR(port);
-+
-+ *parity = 'n';
-+ if (uart_mc & UART_LCR_PE) {
-+ if (uart_mc & UART_LCR_EVEN)
-+ *parity = 'e';
-+ else
-+ *parity = 'o';
-+ }
-+
-+ switch (uart_mc & UART_LCR_MSK){
-+
-+ case UART_LCR_LEN5:
-+ *bits = 5;
-+ break;
-+ case UART_LCR_LEN6:
-+ *bits = 6;
-+ break;
-+ case UART_LCR_LEN7:
-+ *bits = 7;
-+ break;
-+ case UART_LCR_LEN8:
-+ *bits = 8;
-+ break;
-+ }
-+ UART_PUT_MCR(port,UART_LCR_DLAB);
-+ quot = UART_GET_DIV_LO(port) | (UART_GET_DIV_HI(port) << 8);
-+ UART_PUT_MCR(port,uart_mc);
-+ *baud = port->uartclk / (16 *quot );
-+}
-+
-+static int __init sl2312_console_setup(struct console *co, char *options)
-+{
-+ struct uart_port *port;
-+ int baud = 19200;
-+ int bits = 8;
-+ int parity = 'n';
-+ int flow= 'n';
-+
-+ printk("sl2312 console setup : \n");
-+
-+#ifdef CONFIG_ARCH_SL2312
-+ /*
-+ * Check whether an invalid uart number has been specified, and
-+ * if so, search for the first available port that does have
-+ * console support.
-+ */
-+ port = uart_get_console(sl2312_ports,SL2312_NO_PORTS,co);
-+#else
-+ return -ENODEV;
-+#endif
-+
-+ if (options)
-+ uart_parse_options(options, &baud, &parity, &bits, &flow);
-+ else
-+ sl2312_console_get_options(port, &baud, &parity, &bits);
-+
-+ return uart_set_options(port, co, baud, parity, bits, flow);
-+}
-+
-+extern struct uart_driver sl2312_reg;
-+static struct console sl2312_console = {
-+ .name = SERIAL_SL2312_NAME,
-+ .write = sl2312_console_write,
-+ .device = uart_console_device,
-+// .device = sl2312_console_device,
-+ .setup = sl2312_console_setup,
-+// .flags = (CON_PRINTBUFFER|CON_ENABLED),
-+ .flags = CON_PRINTBUFFER,
-+ .index = -1,
-+ .data = &sl2312_reg,
-+};
-+
-+static int __init sl2312_console_init(void)
-+{
-+ register_console(&sl2312_console);
-+ return 0;
-+
-+}
-+
-+console_initcall(sl2312_console_init);
-+
-+#define SL2312_CONSOLE &sl2312_console
-+#else
-+#define SL2312_CONSOLE NULL
-+#endif
-+
-+// static
-+struct uart_driver sl2312_reg = {
-+ .owner = NULL,
-+ .driver_name = SERIAL_SL2312_NAME,
-+ .dev_name = SERIAL_SL2312_NAME,
-+ .major = SERIAL_SL2312_MAJOR,
-+ .minor = SERIAL_SL2312_MINOR,
-+ .nr = UART_NR,
-+ .cons = SL2312_CONSOLE,
-+};
-+
-+static int __init sl2312_init(void)
-+{
-+ int result;
-+ //printk("serial_it8712: it871212_init \n");
-+
-+ result = uart_register_driver(&sl2312_reg);
-+ if(result)
-+ return result;
-+ result = uart_add_one_port(&sl2312_reg, &sl2312_ports[0]);
-+
-+ return result;
-+}
-+
-+
-+__initcall(sl2312_init);
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -147,6 +147,10 @@
- #define PORT_SB1250_DUART 77
-
-
-+/* Storlink Soc */
-+#define PORT_SL2312 72
-+#define PORT_IT8712 73
-+
- #ifdef __KERNEL__
-
- #include <linux/compiler.h>
---- a/drivers/char/Makefile
-+++ b/drivers/char/Makefile
-@@ -70,6 +70,16 @@ obj-$(CONFIG_R3964) += n_r3964.o
- obj-$(CONFIG_APPLICOM) += applicom.o
- obj-$(CONFIG_SONYPI) += sonypi.o
- obj-$(CONFIG_RTC) += rtc.o
-+
-+### for Storlink SoC ###
-+obj-$(CONFIG_SL2312_RTC) += sl2312_rtc.o
-+obj-$(CONFIG_IT8712_GPIO) += it8712_gpio.o
-+obj-$(CONFIG_GEMINI_GPIO) += gemini_gpio.o
-+obj-$(CONFIG_GEMINI_PWC) += gemini_pwr.o
-+obj-$(CONFIG_GEMINI_CIR) += gemini_cir.o
-+obj-$(CONFIG_GEMINI_I2S) += gemini_i2s.o
-+obj-$(CONFIG_SL2312_WATCHDOG) += sl2312_wd.o
-+
- obj-$(CONFIG_HPET) += hpet.o
- obj-$(CONFIG_GEN_RTC) += genrtc.o
- obj-$(CONFIG_EFI_RTC) += efirtc.o
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -280,6 +280,56 @@ config SERIAL_8250_RM9K
-
- comment "Non-8250 serial port support"
-
-+config SERIAL_SL2312
-+ bool "SL2312 serial port (sl2312) support"
-+ depends on ARCH_SL2312
-+ select SERIAL_CORE
-+ select SERIAL_SL2312_CONSOLE
-+ help
-+ Say Y here if you want to use the hard logic uart on SWORD. This
-+ driver also supports soft logic implentations of this uart core.
-+
-+config SERIAL_SL2312_CONSOLE
-+ bool "Support for console on SL2312 serial port"
-+ depends on SERIAL_SL2312
-+ select SERIAL_CORE_CONSOLE
-+ help
-+ Say Y here if you want to support a serial console on an SWORD
-+ hard logic uart or uart00 IP core.
-+
-+ Even if you say Y here, the currently visible virtual console
-+ (/dev/tty0) will still be used as the system console by default, but
-+ you can alter that using a kernel command line option such as
-+ "console=ttyS0". (Try "man bootparam" or see the documentation of
-+ your boot loader (lilo or loadlin) about how to pass options to the
-+ kernel at boot time.)
-+
-+
-+config SERIAL_IT8712
-+ bool "Sl2312 serial port(IT8712) support"
-+ depends on ARM && ARCH_SL2312 && SL2312_LPC
-+ select SERIAL_CORE
-+ select SERIAL_IT8712_CONSOLE
-+ help
-+ Say Y here if you want to use the hard logic uart on Excalibur. This
-+ driver also supports soft logic implentations of this uart core.
-+
-+config SERIAL_IT8712_CONSOLE
-+ bool "Support for console on Sword serial port(IT8712)"
-+ depends on SERIAL_IT8712
-+ select SERIAL_CORE_CONSOLE
-+ help
-+ Say Y here if you want to support a serial console on an Excalibur
-+ hard logic uart or uart00 IP core.
-+
-+ Even if you say Y here, the currently visible virtual console
-+ (/dev/tty0) will still be used as the system console by default, but
-+ you can alter that using a kernel command line option such as
-+ "console=ttySI0". (Try "man bootparam" or see the documentation of
-+ your boot loader (lilo or loadlin) about how to pass options to the
-+ kernel at boot time.)
-+
-+
- config SERIAL_AMBA_PL010
- tristate "ARM AMBA PL010 serial port support"
- depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
---- a/drivers/serial/Makefile
-+++ b/drivers/serial/Makefile
-@@ -62,5 +62,7 @@ obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_se
- obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
- obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
- obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
-+obj-$(CONFIG_SERIAL_IT8712) += it8712.o
-+obj-$(CONFIG_SERIAL_SL2312) += serial_sl2312.o
- obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
- obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
diff --git a/target/linux/storm/patches/009-watchdog.patch b/target/linux/storm/patches/009-watchdog.patch
deleted file mode 100644
index a76ce7f49c..0000000000
--- a/target/linux/storm/patches/009-watchdog.patch
+++ /dev/null
@@ -1,398 +0,0 @@
---- a/arch/arm/mach-sl2312/sl3516_device.c
-+++ b/arch/arm/mach-sl2312/sl3516_device.c
-@@ -76,9 +76,30 @@ static struct platform_device sata0_devi
- .resource = sl3516_sata0_resources,
- };
-
-+static struct resource sl351x_wdt_resources[] = {
-+ [0] = {
-+ .start = SL2312_WAQTCHDOG_BASE + 0x00,
-+ .end = SL2312_WAQTCHDOG_BASE + 0x1C,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = IRQ_WATCHDOG,
-+ .end = IRQ_WATCHDOG,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct platform_device sl351x_wdt = {
-+ .name = "sl351x-wdt",
-+ .id = -1,
-+ .resource = sl351x_wdt_resources,
-+ .num_resources = ARRAY_SIZE(sl351x_wdt_resources),
-+};
-+
- static struct platform_device *sata_devices[] __initdata = {
- &sata_device,
- &sata0_device,
-+ &sl351x_wdt,
- };
-
- static int __init sl3516_init(void)
---- a/drivers/char/watchdog/Kconfig
-+++ b/drivers/char/watchdog/Kconfig
-@@ -171,6 +171,17 @@ config EP93XX_WATCHDOG
- To compile this driver as a module, choose M here: the
- module will be called ep93xx_wdt.
-
-+config WATCHDOG_SL351X
-+ tristate "SL351x Watchdog"
-+ depends on WATCHDOG && ARCH_SL2312
-+ help
-+ This driver adds watchdog support for the integrated watchdog in the
-+ SL351x processors (Farraday core). If you have one of these processors
-+ and wish to have watchdog support enabled, say Y, otherwise say N.
-+
-+ To compile this driver as a module, choose M here: the
-+ module will be called sl351x_wdt.
-+
- config OMAP_WATCHDOG
- tristate "OMAP Watchdog"
- depends on ARCH_OMAP16XX || ARCH_OMAP24XX
---- a/drivers/char/watchdog/Makefile
-+++ b/drivers/char/watchdog/Makefile
-@@ -36,6 +36,7 @@ obj-$(CONFIG_S3C2410_WATCHDOG) += s3c241
- obj-$(CONFIG_SA1100_WATCHDOG) += sa1100_wdt.o
- obj-$(CONFIG_MPCORE_WATCHDOG) += mpcore_wdt.o
- obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
-+obj-$(CONFIG_WATCHDOG_SL351X) += sl351x_wdt.o
- obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
- obj-$(CONFIG_IOP_WATCHDOG) += iop_wdt.o
- obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o
---- /dev/null
-+++ b/drivers/char/watchdog/sl351x_wdt.c
-@@ -0,0 +1,332 @@
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/fs.h>
-+#include <linux/mm.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/miscdevice.h>
-+#include <linux/watchdog.h>
-+#include <linux/platform_device.h>
-+#include <asm/uaccess.h>
-+#include <asm/arch/sl2312.h>
-+#include <asm/arch/hardware.h>
-+#include <asm/arch/irqs.h>
-+#include <asm/arch/watchdog.h>
-+#include <asm/io.h>
-+#include <linux/interrupt.h>
-+
-+#define WATCHDOG_TEST 1
-+#define PFX "sl351x-wdt: "
-+
-+#define _WATCHDOG_COUNTER 0x00
-+#define _WATCHDOG_LOAD 0x04
-+#define _WATCHDOG_RESTART 0x08
-+#define _WATCHDOG_CR 0x0C
-+#define _WATCHDOG_STATUS 0x10
-+#define _WATCHDOG_CLEAR 0x14
-+#define _WATCHDOG_INTRLEN 0x18
-+
-+static struct resource *wdt_mem;
-+static struct resource *wdt_irq;
-+static void __iomem *wdt_base;
-+static int wdt_margin = WATCHDOG_TIMEOUT_MARGIN; /* in range of 0 .. 60s */
-+
-+static int open_state = WATCHDOG_DRIVER_CLOSE;
-+static int wd_expire = 0;
-+
-+static void watchdog_enable(void)
-+{
-+ unsigned long wdcr;
-+
-+ wdcr = readl(wdt_base + _WATCHDOG_CR);
-+ wdcr |= (WATCHDOG_WDENABLE_MSK|WATCHDOG_WDRST_MSK);
-+#ifdef WATCHDOG_TEST
-+ wdcr |= WATCHDOG_WDINTR_MSK;
-+// wdcr &= ~WATCHDOG_WDRST_MSK;
-+#endif
-+ wdcr &= ~WATCHDOG_WDCLOCK_MSK;
-+ writel(wdcr, wdt_base + _WATCHDOG_CR);
-+}
-+
-+static void watchdog_set_timeout(unsigned long timeout)
-+{
-+ timeout = WATCHDOG_TIMEOUT_SCALE * timeout;
-+ writel(timeout, wdt_base + _WATCHDOG_LOAD);
-+ writel(WATCHDOG_RESTART_VALUE, wdt_base + _WATCHDOG_RESTART);
-+}
-+
-+static void watchdog_keepalive(void)
-+{
-+ writel(WATCHDOG_RESTART_VALUE, wdt_base + _WATCHDOG_RESTART);
-+}
-+
-+static void watchdog_disable(void)
-+{
-+ unsigned long wdcr;
-+
-+ wdcr = readl(wdt_base + _WATCHDOG_CR);
-+ wdcr &= ~WATCHDOG_WDENABLE_MSK;
-+ writel(wdcr, wdt_base + _WATCHDOG_CR);
-+}
-+
-+
-+#ifdef WATCHDOG_TEST
-+static irqreturn_t watchdog_irq(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+ unsigned int clear;
-+
-+ writel(WATCHDOG_CLEAR_STATUS, wdt_base + _WATCHDOG_CLEAR);
-+ printk(KERN_INFO PFX "Watchdog timeout, resetting system...\n");
-+
-+ clear = __raw_readl(IO_ADDRESS(SL2312_INTERRUPT_BASE)+0x0C);
-+ clear &= 0x01;
-+ __raw_writel(clear,IO_ADDRESS(SL2312_INTERRUPT_BASE)+0x08);
-+ wd_expire = 1;
-+ return IRQ_HANDLED;
-+}
-+
-+#endif
-+
-+#define OPTIONS WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE
-+static struct watchdog_info sl351x_wdt_ident = {
-+ .options = OPTIONS,
-+ .firmware_version = 0,
-+ .identity = "sl351x Watchdog",
-+};
-+
-+struct file_operations watchdog_fops = {
-+ .write = watchdog_write,
-+ .read = watchdog_read,
-+ .open = watchdog_open,
-+ .release = watchdog_release,
-+ .ioctl = watchdog_ioctl,
-+};
-+
-+static int watchdog_open(struct inode *inode, struct file *filp)
-+{
-+ if (open_state == WATCHDOG_DRIVER_OPEN)
-+ return -EBUSY;
-+
-+ wd_expire = 0;
-+
-+ watchdog_disable();
-+ watchdog_set_timeout(wdt_margin);
-+ watchdog_enable();
-+
-+ printk(KERN_INFO PFX "watchog timer enabled, margin: %ds.\n", wdt_margin);
-+ open_state = WATCHDOG_DRIVER_OPEN;
-+
-+ return nonseekable_open(inode, filp);
-+}
-+
-+static int watchdog_release(struct inode *inode, struct file *filp)
-+{
-+ watchdog_disable();
-+
-+ open_state = WATCHDOG_DRIVER_CLOSE;
-+ wd_expire = 0;
-+ printk(KERN_INFO PFX "watchog timer disabled, margin: %ds.\n", wdt_margin);
-+
-+ return 0;
-+}
-+
-+static ssize_t watchdog_read(struct file *filp, char *buf, size_t count, loff_t *off)
-+{
-+ int i;
-+ unsigned long val;
-+
-+
-+ for(i=0;i< count;i++)
-+ {
-+ if ((i%4)==0)
-+ val = *((unsigned long *)WATCHDOG_COUNTER);
-+ buf[i] = (val & 0xFF);
-+ val >>= 8;
-+ }
-+ return count;
-+}
-+
-+static ssize_t watchdog_write(struct file *filp, const char *buf, size_t len, loff_t *off)
-+{
-+ /* Refresh the timer. */
-+ if (len) {
-+ watchdog_keepalive();
-+ }
-+ return len;
-+
-+}
-+
-+static int watchdog_ioctl(struct inode *inode, struct file *filp,
-+ unsigned int cmd, unsigned long arg)
-+{
-+ void __user *argp = (void __user *)arg;
-+ int margin;
-+
-+ switch(cmd)
-+ {
-+ case WDIOC_GETSUPPORT:
-+ return copy_to_user(argp, &sl351x_wdt_ident,
-+ sizeof(sl351x_wdt_ident)) ? -EFAULT : 0;
-+
-+ case WDIOC_GETSTATUS:
-+ case WDIOC_GETBOOTSTATUS:
-+ return put_user(0, (int __user*)argp);
-+
-+ case WDIOC_KEEPALIVE:
-+ watchdog_keepalive();
-+ return 0;
-+
-+ case WDIOC_SETTIMEOUT:
-+ if (get_user(margin, (int __user*)argp))
-+ return -EFAULT;
-+
-+ /* Arbitrary, can't find the card's limits */
-+ if ((margin < 0) || (margin > 60))
-+ return -EINVAL;
-+
-+ // watchdog_disable();
-+ wdt_margin = margin;
-+ watchdog_set_timeout(margin);
-+ watchdog_keepalive();
-+ // watchdog_enable();
-+
-+ /* Fall through */
-+
-+ case WDIOC_GETTIMEOUT:
-+ return put_user(wdt_margin, (int *)arg);
-+
-+ default:
-+ return -ENOIOCTLCMD;
-+ }
-+}
-+
-+static struct miscdevice wd_dev= {
-+ WATCHDOG_MINOR,
-+ "watchdog",
-+ &watchdog_fops
-+};
-+
-+static char banner[] __initdata = KERN_INFO "SL351x Watchdog Timer, (c) 2007 WILIBOX\n";
-+
-+static int sl351x_wdt_probe(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+ int ret, size;
-+ unsigned long wdcr;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (res == NULL) {
-+ printk(KERN_INFO PFX "failed to get memory region resouce\n");
-+ return -ENOMEM;
-+ }
-+
-+ size = (res->end-res->start)+1;
-+
-+ wdt_mem = request_mem_region(res->start, size, pdev->name);
-+ if (wdt_mem == NULL) {
-+ printk(KERN_INFO PFX "failed to get memory region\n");
-+ return -ENOENT;
-+ }
-+
-+ wdt_base = ioremap(res->start, size);
-+ if (wdt_base == NULL) {
-+ printk(KERN_INFO PFX "failed to ioremap() region\n");
-+ return -EINVAL;
-+ }
-+
-+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-+ if (res == NULL) {
-+ printk(KERN_INFO PFX "failed to get irq resource\n");
-+ return -ENOENT;
-+ }
-+
-+ wdt_irq = res;
-+
-+ ret = request_irq(res->start, watchdog_irq, 0, pdev->name, pdev);
-+ if (ret != 0) {
-+ printk(KERN_INFO PFX "failed to install irq (%d)\n", ret);
-+ return ret;
-+ }
-+
-+ wdcr = readl(wdt_base + _WATCHDOG_CR);
-+ if (wdcr & WATCHDOG_WDENABLE_MSK) {
-+ printk(KERN_INFO PFX "Found watchdog in enabled state, reseting ...\n");
-+ wdcr &= ~WATCHDOG_WDENABLE_MSK;
-+ writel(wdcr, wdt_base + _WATCHDOG_CR);
-+ }
-+
-+ ret = misc_register(&wd_dev);
-+
-+ return ret;
-+}
-+
-+static int sl351x_wdt_remove(struct platform_device *pdev)
-+{
-+ if (wdt_base != NULL) {
-+ iounmap(wdt_base);
-+ wdt_base = NULL;
-+ }
-+
-+ if (wdt_irq != NULL) {
-+ free_irq(wdt_irq->start, pdev);
-+ release_resource(wdt_irq);
-+ wdt_irq = NULL;
-+ }
-+
-+ if (wdt_mem != NULL) {
-+ release_resource(wdt_mem);
-+ wdt_mem = NULL;
-+ }
-+
-+ misc_deregister(&wd_dev);
-+
-+ return 0;
-+}
-+
-+static void sl351x_wdt_shutdown(struct platform_device *dev)
-+{
-+ watchdog_disable();
-+}
-+
-+#ifdef CONFIG_PM
-+static int sl351x_wdt_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+ watchdog_disable();
-+}
-+
-+static int sl351x_wdt_resume(struct platform_device *dev)
-+{
-+ watchdog_set_timeout(wdt_margin);
-+ watchdog_enable();
-+}
-+
-+#else
-+#define sl351x_wdt_suspend NULL
-+#define sl351x_wdt_resume NULL
-+#endif
-+
-+static struct platform_driver sl351x_wdt_driver = {
-+ .probe = sl351x_wdt_probe,
-+ .remove = sl351x_wdt_remove,
-+ .shutdown = sl351x_wdt_shutdown,
-+ .suspend = sl351x_wdt_suspend,
-+ .resume = sl351x_wdt_resume,
-+ .driver = {
-+ .owner = THIS_MODULE,
-+ .name = "sl351x-wdt",
-+ },
-+};
-+
-+static int __init watchdog_init(void)
-+{
-+ printk(banner);
-+ return platform_driver_register(&sl351x_wdt_driver);
-+}
-+
-+static void __exit watchdog_exit(void)
-+{
-+ platform_driver_unregister(&sl351x_wdt_driver);
-+}
-+
-+module_init(watchdog_init);
-+module_exit(watchdog_exit);
diff --git a/target/linux/storm/patches/1100-gpio.patch b/target/linux/storm/patches/1100-gpio.patch
deleted file mode 100644
index 5717d75235..0000000000
--- a/target/linux/storm/patches/1100-gpio.patch
+++ /dev/null
@@ -1,384 +0,0 @@
---- /dev/null
-+++ b/drivers/char/gemini_gpio_dev.c
-@@ -0,0 +1,356 @@
-+/*
-+ * GPIO driver for Gemini board
-+ * Provides /dev/gpio
-+ */
-+
-+#include <linux/version.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/proc_fs.h>
-+#include <linux/fcntl.h>
-+#include <linux/miscdevice.h>
-+#include <asm/uaccess.h> /* copy_to_user, copy_from_user */
-+
-+#include <asm/hardware.h>
-+#include <asm/io.h>
-+#include <asm/arch/sl2312.h>
-+#include <asm/arch/irqs.h>
-+#include <asm/arch/gemini_gpio.h>
-+
-+#define GEMINI_GPIO_BASE1 IO_ADDRESS(SL2312_GPIO_BASE)
-+#define GEMINI_GPIO_BASE2 IO_ADDRESS(SL2312_GPIO_BASE1)
-+
-+#define GPIO_SET 2
-+#define MAX_GPIO_LINE 32*GPIO_SET
-+
-+wait_queue_head_t gemini_gpio_wait[MAX_GPIO_LINE];
-+
-+enum GPIO_REG
-+{
-+ GPIO_DATA_OUT = 0x00,
-+ GPIO_DATA_IN = 0x04,
-+ GPIO_PIN_DIR = 0x08,
-+ GPIO_BY_PASS = 0x0C,
-+ GPIO_DATA_SET = 0x10,
-+ GPIO_DATA_CLEAR = 0x14,
-+ GPIO_PULL_ENABLE = 0x18,
-+ GPIO_PULL_TYPE = 0x1C,
-+ GPIO_INT_ENABLE = 0x20,
-+ GPIO_INT_RAW_STATUS = 0x24,
-+ GPIO_INT_MASK_STATUS = 0x28,
-+ GPIO_INT_MASK = 0x2C,
-+ GPIO_INT_CLEAR = 0x30,
-+ GPIO_INT_TRIG = 0x34,
-+ GPIO_INT_BOTH = 0x38,
-+ GPIO_INT_POLAR = 0x3C
-+};
-+
-+unsigned int regist_gpio_int0=0,regist_gpio_int1=0;
-+
-+/* defines a specific GPIO bit number and state */
-+struct gpio_bit {
-+ unsigned char bit;
-+ unsigned char state;
-+};
-+
-+#define GPIO_MAJOR 10
-+#define GPIO_MINOR 127
-+
-+/*
-+ * ioctl calls that are permitted to the /dev/gpio interface
-+ */
-+#define GPIO_GET_BIT 0x0000001
-+#define GPIO_SET_BIT 0x0000002
-+#define GPIO_GET_CONFIG 0x0000003
-+#define GPIO_SET_CONFIG 0x0000004
-+
-+//#define GPIO_CONFIG_OUT 1
-+//#define GPIO_CONFIG_IN 2
-+
-+
-+
-+#define DEVICE_NAME "gpio"
-+
-+//#define DEBUG
-+
-+/*
-+ * GPIO interface
-+ */
-+
-+/* /dev/gpio */
-+static int gpio_ioctl(struct inode *inode, struct file *file,
-+ unsigned int cmd, unsigned long arg);
-+
-+/* /proc/driver/gpio */
-+static int gpio_read_proc(char *page, char **start, off_t off,
-+ int count, int *eof, void *data);
-+
-+static unsigned char gpio_status; /* bitmapped status byte. */
-+
-+/* functions for set/get gpio lines on storlink cpu */
-+
-+void gpio_line_get(unsigned char pin, u32 * data)
-+{
-+ unsigned int set = pin >>5; // each GPIO set has 32 pins
-+ unsigned int status,addr;
-+
-+ addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1) + GPIO_DATA_IN;
-+ status = readl(addr);
-+#ifdef DEBUG
-+ printk("status = %08X, pin = %d, set = %d\n", status, pin, set);
-+#endif
-+ if (set)
-+ *data = (status&(1<<(pin-32)))?1:0;
-+ else
-+ *data = (status&(1<<pin))?1:0;
-+}
-+
-+void gpio_line_set(unsigned char pin, u32 high)
-+{
-+ unsigned char set = pin >>5; // each GPIO set has 32 pins
-+ unsigned int status=0,addr;
-+
-+ addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1)+(high?GPIO_DATA_SET:GPIO_DATA_CLEAR);
-+
-+ status &= ~(1 << (pin %32));
-+ status |= (1 << (pin % 32));
-+ writel(status,addr);
-+}
-+
-+/*
-+ * pin = [0..63]
-+ * mode =
-+ * 1 -- OUT
-+ * 2 -- IN
-+ */
-+void gpio_line_config(unsigned char pin, unsigned char mode)
-+{
-+ unsigned char set = pin >>5; // each GPIO set has 32 pins
-+ unsigned int status,addr;
-+
-+ addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1)+GPIO_PIN_DIR;
-+ status = readl(addr);
-+
-+ status &= ~(1 << (pin %32));
-+ if (mode == 1)
-+ status |= (1 << (pin % 32)); /* PinDir: 0 - input, 1 - output */
-+
-+ writel(status,addr);
-+#if 0
-+ /* enable pullup-high if mode is input */
-+
-+ addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1)+GPIO_PULL_ENABLE;
-+ status = readl(addr);
-+
-+ status &= ~(1 << (pin %32));
-+ if (mode == 2) /* input */
-+ status |= (1 << (pin % 32)); /* PullEnable: 0 - disable, 1 - enable */
-+
-+ writel(status,addr);
-+
-+ addr = (set ? GEMINI_GPIO_BASE2:GEMINI_GPIO_BASE1)+GPIO_PULL_TYPE;
-+ status = readl(addr);
-+
-+ status &= ~(1 << (pin %32));
-+ if (mode == 2) /* input */
-+ status |= (1 << (pin % 32)); /* PullType: 0 - low, 1 - high */
-+
-+ writel(status,addr);
-+#endif
-+}
-+
-+#define GPIO_IS_OPEN 0x01 /* means /dev/gpio is in use */
-+
-+/*
-+ * Now all the various file operations that we export.
-+ */
-+static int gpio_ioctl(struct inode *inode, struct file *file,
-+ unsigned int cmd, unsigned long arg)
-+{
-+ struct gpio_bit bit;
-+ u32 val;
-+
-+ if (copy_from_user(&bit, (struct gpio_bit *)arg,
-+ sizeof(bit)))
-+ return -EFAULT;
-+
-+ switch (cmd) {
-+
-+ case GPIO_GET_BIT:
-+ gpio_line_get(bit.bit, &val);
-+ bit.state = val;
-+ return copy_to_user((void *)arg, &bit, sizeof(bit)) ? -EFAULT : 0;
-+ case GPIO_SET_BIT:
-+ val = bit.state;
-+ gpio_line_set(bit.bit, val);
-+ return 0;
-+ case GPIO_GET_CONFIG:
-+ // gpio_line_config(bit.bit, bit.state);
-+ return copy_to_user((void *)arg, &bit, sizeof(bit)) ? -EFAULT : 0;
-+ case GPIO_SET_CONFIG:
-+ val = bit.state;
-+ gpio_line_config(bit.bit, bit.state);
-+ return 0;
-+ }
-+ return -EINVAL;
-+}
-+
-+
-+static int gpio_open(struct inode *inode, struct file *file)
-+{
-+ if (gpio_status & GPIO_IS_OPEN)
-+ return -EBUSY;
-+
-+ gpio_status |= GPIO_IS_OPEN;
-+ return 0;
-+}
-+
-+
-+static int gpio_release(struct inode *inode, struct file *file)
-+{
-+ /*
-+ * Turn off all interrupts once the device is no longer
-+ * in use and clear the data.
-+ */
-+
-+ gpio_status &= ~GPIO_IS_OPEN;
-+ return 0;
-+}
-+
-+
-+/*
-+ * The various file operations we support.
-+ */
-+
-+static struct file_operations gpio_fops = {
-+ .owner = THIS_MODULE,
-+ .ioctl = gpio_ioctl,
-+ .open = gpio_open,
-+ .release = gpio_release,
-+};
-+
-+static struct miscdevice gpio_dev =
-+{
-+ .minor = GPIO_MINOR,
-+ .name = "gpio",
-+ .fops = &gpio_fops,
-+};
-+
-+
-+
-+
-+#ifdef CONFIG_PROC_FS
-+static struct proc_dir_entry *dir;
-+
-+/*
-+ * Info exported via "/proc/driver/gpio".
-+ */
-+static int gpio_get_status(char *buf)
-+{
-+ char *p = buf;
-+ u32 val = 0;
-+ int i;
-+ int bit;
-+#ifdef DEBUG
-+ u32 addr;
-+
-+ for (i = 0; i < 0x20; i+=4 ) {
-+ addr = IO_ADDRESS(SL2312_GPIO_BASE) + i;
-+ val = readl(addr);
-+ p+=sprintf(p, "GPIO0: 0x%02X: %08X\n", i, val );
-+ }
-+ for (i = 0; i < 0x20; i+=4 ) {
-+ addr = IO_ADDRESS(SL2312_GPIO_BASE1) + i;
-+ val = readl(addr);
-+ p+=sprintf(p, "GPIO1: 0x%02X: %08X\n", i, val );
-+ }
-+#endif
-+
-+ for (i = 0; i < 32; i++) {
-+ gpio_line_get(i, &bit);
-+ if (bit)
-+ val |= (1 << i);
-+ }
-+ p += sprintf(p, "gpio0\t: 0x%08x\n", val);
-+
-+ val = 0;
-+ for (i = 32; i < 64; i++) {
-+ gpio_line_get(i, &bit);
-+ if (bit)
-+ val |= (1 << i);
-+ }
-+ p += sprintf(p, "gpio1\t: 0x%08x\n", val);
-+
-+ return p - buf;
-+}
-+
-+
-+/* /proc/driver/gpio read op
-+ */
-+static int gpio_read_proc(char *page, char **start, off_t off,
-+ int count, int *eof, void *data)
-+{
-+ int len = gpio_get_status (page);
-+
-+ if (len <= off+count)
-+ *eof = 1;
-+ *start = page + off;
-+ len -= off;
-+ if ( len > count )
-+ len = count;
-+ if ( len < 0 )
-+ len = 0;
-+ return len;
-+}
-+#endif /* CONFIG_PROC_FS */
-+
-+
-+static int __init gpio_init_module(void)
-+{
-+ int retval;
-+#ifdef CONFIG_PROC_FS
-+ struct proc_dir_entry *res;
-+#endif
-+
-+ /* register /dev/gpio file ops */
-+ //retval = register_chrdev(GPIO_MAJOR, DEVICE_NAME, &gpio_fops);
-+ retval = misc_register(&gpio_dev);
-+ if(retval < 0)
-+ return retval;
-+
-+#ifdef CONFIG_PROC_FS
-+ dir = proc_mkdir("driver/gpio", NULL);
-+ if (!dir) {
-+ misc_deregister(&gpio_dev);
-+ return -ENOMEM;
-+ }
-+ /* register /proc/driver/gpio */
-+ res = create_proc_entry("info", 0644, dir);
-+ if (res) {
-+ res->read_proc= gpio_read_proc;
-+ } else {
-+ misc_deregister(&gpio_dev);
-+ return -ENOMEM;
-+ }
-+#endif
-+
-+ printk("%s: GPIO driver loaded\n", __FILE__);
-+
-+ return 0;
-+}
-+
-+static void __exit gpio_cleanup_module(void)
-+{
-+ remove_proc_entry ("info", dir);
-+ misc_deregister(&gpio_dev);
-+
-+ printk("%s: GPIO driver unloaded\n", __FILE__);
-+}
-+
-+module_init(gpio_init_module);
-+module_exit(gpio_cleanup_module);
-+
-+MODULE_AUTHOR("Jonas Majauskas");
-+MODULE_LICENSE("GPL");
-+
---- a/drivers/char/Kconfig
-+++ b/drivers/char/Kconfig
-@@ -1071,5 +1071,12 @@ config DEVPORT
-
- source "drivers/s390/char/Kconfig"
-
-+config GEMINI_GPIO_DEV
-+ tristate "GPIO driver for Gemini board (provides /dev/gpio)"
-+ depends on ARCH_SL2312
-+ default n
-+ help
-+ GPIO driver for Gemini boards - SL3512, SL3516.
-+
- endmenu
-
---- a/drivers/char/Makefile
-+++ b/drivers/char/Makefile
-@@ -116,6 +116,7 @@ obj-$(CONFIG_IPMI_HANDLER) += ipmi/
-
- obj-$(CONFIG_HANGCHECK_TIMER) += hangcheck-timer.o
- obj-$(CONFIG_TCG_TPM) += tpm/
-+obj-$(CONFIG_GEMINI_GPIO_DEV) += gemini_gpio_dev.o
-
- obj-$(CONFIG_PS3_FLASH) += ps3flash.o
-