aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/storm/patches/007-mtd.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/storm/patches/007-mtd.patch')
-rw-r--r--target/linux/storm/patches/007-mtd.patch4948
1 files changed, 0 insertions, 4948 deletions
diff --git a/target/linux/storm/patches/007-mtd.patch b/target/linux/storm/patches/007-mtd.patch
deleted file mode 100644
index a907de32cb..0000000000
--- a/target/linux/storm/patches/007-mtd.patch
+++ /dev/null
@@ -1,4948 +0,0 @@
---- a/drivers/mtd/chips/Kconfig
-+++ b/drivers/mtd/chips/Kconfig
-@@ -220,6 +220,13 @@ config MTD_ROM
- This option enables basic support for ROM chips accessed through
- a bus mapping driver.
-
-+config MTD_SERIAL
-+ tristate "Support for Serial chips in bus mapping"
-+ depends on MTD
-+ help
-+ This option enables basic support for Serial chips accessed through
-+ a bus mapping driver.
-+
- config MTD_ABSENT
- tristate "Support for absent chips in bus mapping"
- help
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -39,10 +39,15 @@
- #include <linux/mtd/cfi.h>
- #include <linux/mtd/xip.h>
-
-+//****** Storlink SoC ******
- #define AMD_BOOTLOC_BUG
--#define FORCE_WORD_WRITE 0
--
--#define MAX_WORD_RETRIES 3
-+//#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
-+#define FORCE_FAST_PROG 0
-+
-+//#define MAX_WORD_RETRIES 3
-+#define MAX_WORD_RETRIES 3 // CONFIG_MTD_CFI_AMDSTD_RETRY
-+//**************************
-
- #define MANUFACTURER_AMD 0x0001
- #define MANUFACTURER_ATMEL 0x001F
-@@ -322,6 +327,13 @@ struct mtd_info *cfi_cmdset_0002(struct
- #endif
-
- bootloc = extp->TopBottom;
-+//****** Storlink SoC ******
-+ if(bootloc == 5)
-+ {
-+ bootloc = 3;
-+ extp->TopBottom = 3;
-+ }
-+//**************************
- if ((bootloc != 2) && (bootloc != 3)) {
- printk(KERN_WARNING "%s: CFI does not contain boot "
- "bank location. Assuming top.\n", map->name);
-@@ -340,6 +352,9 @@ struct mtd_info *cfi_cmdset_0002(struct
- cfi->cfiq->EraseRegionInfo[j] = swap;
- }
- }
-+#ifdef CONFIG_MTD_MAP_BANK_WIDTH_1
-+ cfi->device_type = CFI_DEVICETYPE_X8;
-+#endif
- /* Set the default CFI lock/unlock addresses */
- cfi->addr_unlock1 = 0x555;
- cfi->addr_unlock2 = 0x2aa;
-@@ -461,6 +476,7 @@ static int __xipram chip_ready(struct ma
- map_word d, t;
-
- d = map_read(map, addr);
-+ udelay(20); //Storlink SoC
- t = map_read(map, addr);
-
- return map_word_equal(map, d, t);
-@@ -626,7 +642,9 @@ static void put_chip(struct map_info *ma
- default:
- printk(KERN_ERR "MTD: put_chip() called with oldstate %d!!\n", chip->oldstate);
- }
-+//****** Storlink SoC ******
- wake_up(&chip->wq);
-+//**************************
- }
-
- #ifdef CONFIG_MTD_XIP
-@@ -940,7 +958,9 @@ static inline int do_read_secsi_onechip(
- cfi_send_gen_cmd(0x90, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
- cfi_send_gen_cmd(0x00, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
-
-+//****** Storlink SoC ******
- wake_up(&chip->wq);
-+//**************************
- spin_unlock(chip->mutex);
-
- return 0;
-@@ -1005,7 +1025,10 @@ static int __xipram do_write_oneword(str
- */
- unsigned long uWriteTimeout = ( HZ / 1000 ) + 1;
- int ret = 0;
-- map_word oldd;
-+//****** Storlink SoC ******
-+// map_word oldd;
-+ map_word oldd, tmp;
-+//**************************
- int retry_cnt = 0;
-
- adr += chip->start;
-@@ -1037,9 +1060,15 @@ static int __xipram do_write_oneword(str
- ENABLE_VPP(map);
- xip_disable(map, chip, adr);
- retry:
-+//****** Storlink SoC ******
-+#if FORCE_FAST_PROG /* Unlock bypass */
-+ cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
-+#else
- cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
- cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
- cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
-+#endif
-+//**************************
- map_write(map, datum, adr);
- chip->state = FL_WRITING;
-
-@@ -1072,7 +1101,13 @@ static int __xipram do_write_oneword(str
- }
-
- if (chip_ready(map, adr))
-- break;
-+ {
-+ tmp = map_read(map, adr);
-+ if(map_word_equal(map, tmp, datum))
-+// goto op_done;
-+ break;
-+
-+ }
-
- /* Latency issues. Drop the lock, wait a while and retry */
- UDELAY(map, chip, adr, 1);
-@@ -1084,8 +1119,17 @@ static int __xipram do_write_oneword(str
- /* FIXME - should have reset delay before continuing */
-
- if (++retry_cnt <= MAX_WORD_RETRIES)
-+ {
-+//****** Storlink SoC ******
-+#if FORCE_FAST_PROG
-+ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
-+ //udelay(1);
-+#endif
-+ udelay(1);
- goto retry;
--
-+ }
- ret = -EIO;
- }
- xip_enable(map, chip, adr);
-@@ -1171,7 +1215,14 @@ static int cfi_amdstd_write_words(struct
- return 0;
- }
- }
--
-+//****** Storlink SoC ******
-+ map_write( map, CMD(0xF0), chipstart );
-+#if FORCE_FAST_PROG
-+ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chipstart, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
-+//**************************
- /* We are now aligned, write as much as possible */
- while(len >= map_bankwidth(map)) {
- map_word datum;
-@@ -1181,7 +1232,15 @@ static int cfi_amdstd_write_words(struct
- ret = do_write_oneword(map, &cfi->chips[chipnum],
- ofs, datum);
- if (ret)
-+ {
-+//****** Storlink SoC ******
-+#if FORCE_FAST_PROG
-+ /* Get out of unlock bypass mode */
-+ cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
- return ret;
-+ }
-
- ofs += map_bankwidth(map);
- buf += map_bankwidth(map);
-@@ -1189,19 +1248,38 @@ static int cfi_amdstd_write_words(struct
- len -= map_bankwidth(map);
-
- if (ofs >> cfi->chipshift) {
-+//****** Storlink SoC ******
-+#if FORCE_FAST_PROG
-+ /* Get out of unlock bypass mode */
-+ cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
- chipnum ++;
- ofs = 0;
- if (chipnum == cfi->numchips)
- return 0;
- chipstart = cfi->chips[chipnum].start;
-+#if FORCE_FAST_PROG
-+ /* Go into unlock bypass mode for next set of chips */
-+ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chipstart, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
- }
- }
-
-+#if FORCE_FAST_PROG
-+ /* Get out of unlock bypass mode */
-+ cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
-+
- /* Write the trailing bytes if any */
- if (len & (map_bankwidth(map)-1)) {
- map_word tmp_buf;
-
- retry1:
-+
- spin_lock(cfi->chips[chipnum].mutex);
-
- if (cfi->chips[chipnum].state != FL_READY) {
-@@ -1221,7 +1299,11 @@ static int cfi_amdstd_write_words(struct
- #endif
- goto retry1;
- }
--
-+#if FORCE_FAST_PROG
-+ cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chipstart, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
- tmp_buf = map_read(map, ofs + chipstart);
-
- spin_unlock(cfi->chips[chipnum].mutex);
-@@ -1231,11 +1313,23 @@ static int cfi_amdstd_write_words(struct
- ret = do_write_oneword(map, &cfi->chips[chipnum],
- ofs, tmp_buf);
- if (ret)
-+ {
-+#if FORCE_FAST_PROG
-+ /* Get out of unlock bypass mode */
-+ cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
- return ret;
--
-+ }
-+#if FORCE_FAST_PROG
-+ /* Get out of unlock bypass mode */
-+ cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+ cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
-+#endif
- (*retlen) += len;
- }
-
-+ map_write( map, CMD(0xF0), chipstart );
- return 0;
- }
-
-@@ -1275,6 +1369,7 @@ static int __xipram do_write_buffer(stru
- ENABLE_VPP(map);
- xip_disable(map, chip, cmd_adr);
-
-+ map_write( map, CMD(0xF0), chip->start ); //Storlink
- cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
- cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
- //cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
-@@ -1535,6 +1630,9 @@ static int __xipram do_erase_oneblock(st
- DECLARE_WAITQUEUE(wait, current);
- int ret = 0;
-
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_lock(); // sl2312 share pin lock
-+#endif
- adr += chip->start;
-
- spin_lock(chip->mutex);
-@@ -1613,6 +1711,9 @@ static int __xipram do_erase_oneblock(st
- chip->state = FL_READY;
- put_chip(map, chip, adr);
- spin_unlock(chip->mutex);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return ret;
- }
-
---- /dev/null
-+++ b/drivers/mtd/chips/map_serial.c
-@@ -0,0 +1,188 @@
-+/*
-+ * Common code to handle map devices which are simple ROM
-+ * (C) 2000 Red Hat. GPL'd.
-+ * $Id: map_serial.c,v 1.3 2006/06/05 02:34:54 middle Exp $
-+ */
-+
-+#include <linux/version.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <asm/io.h>
-+
-+#include <asm/byteorder.h>
-+#include <linux/errno.h>
-+#include <linux/slab.h>
-+
-+#include <asm/hardware.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/init.h> //add
-+#include <asm/arch/sl2312.h>
-+#include <asm/arch/flash.h>
-+
-+static int mapserial_erase(struct mtd_info *mtd, struct erase_info *instr);
-+static int mapserial_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
-+static int mapserial_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+static void mapserial_nop (struct mtd_info *);
-+struct mtd_info *map_serial_probe(struct map_info *map);
-+
-+extern int m25p80_sector_erase(__u32 address, __u32 schip_en);
-+
-+static struct mtd_chip_driver mapserial_chipdrv = {
-+ probe: map_serial_probe,
-+ name: "map_serial",
-+ module: THIS_MODULE
-+};
-+
-+struct mtd_info *map_serial_probe(struct map_info *map)
-+{
-+ struct mtd_info *mtd;
-+
-+ mtd = kmalloc(sizeof(*mtd), GFP_KERNEL);
-+ if (!mtd)
-+ return NULL;
-+
-+ memset(mtd, 0, sizeof(*mtd));
-+
-+ map->fldrv = &mapserial_chipdrv;
-+ mtd->priv = map;
-+ mtd->name = map->name;
-+ mtd->type = MTD_OTHER;
-+ mtd->erase = mapserial_erase;
-+ mtd->size = map->size;
-+ mtd->read = mapserial_read;
-+ mtd->write = mapserial_write;
-+ mtd->sync = mapserial_nop;
-+ mtd->flags = (MTD_WRITEABLE|MTD_ERASEABLE);
-+// mtd->erasesize = 512; // page size;
-+#ifdef CONFIG_MTD_SL2312_SERIAL_ST
-+ mtd->erasesize = M25P80_SECTOR_SIZE; // block size;
-+#else
-+ mtd->erasesize = 0x1000; // block size;
-+#endif
-+
-+ __module_get(THIS_MODULE);
-+ //MOD_INC_USE_COUNT;
-+ return mtd;
-+}
-+
-+#define FLASH_ACCESS_OFFSET 0x00000010
-+#define FLASH_ADDRESS_OFFSET 0x00000014
-+#define FLASH_WRITE_DATA_OFFSET 0x00000018
-+#define FLASH_READ_DATA_OFFSET 0x00000018
-+
-+static __u32 readflash_ctrl_reg(__u32 ofs)
-+{
-+ __u32 *base;
-+
-+ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
-+ return __raw_readl(base);
-+}
-+
-+static void writeflash_ctrl_reg(__u32 data, __u32 ofs)
-+{
-+ __u32 *base;
-+
-+ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
-+ __raw_writel(data, base);
-+}
-+
-+static int mapserial_erase_block(struct map_info *map,unsigned int block)
-+{
-+
-+ __u32 address;
-+#ifdef CONFIG_MTD_SL2312_SERIAL_ST
-+
-+ if(!m25p80_sector_erase(block, 0))
-+ return (MTD_ERASE_DONE);
-+#else
-+ __u32 opcode;
-+ __u32 count=0;
-+// __u8 status;
-+
-+ // printk("mapserial_erase_block : erase block %d \n",block);
-+// opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd;
-+ opcode = 0x80000000 | 0x0200 | 0x50;
-+ address = (block << 13);
-+ writeflash_ctrl_reg(address,FLASH_ADDRESS_OFFSET);
-+ writeflash_ctrl_reg(opcode,FLASH_ACCESS_OFFSET);
-+ opcode=readflash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(opcode&0x80000000)
-+ {
-+ opcode = readflash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ count++;
-+ if (count > 10000)
-+ {
-+ return (MTD_ERASE_FAILED);
-+ }
-+ }
-+ return (MTD_ERASE_DONE);
-+#endif
-+}
-+
-+static int mapserial_erase(struct mtd_info *mtd, struct erase_info *instr)
-+{
-+ struct map_info *map = (struct map_info *)mtd->priv;
-+ unsigned int addr;
-+ int len;
-+ unsigned int block;
-+ unsigned int ret=0;
-+
-+ addr = instr->addr;
-+ len = instr->len;
-+ while (len > 0)
-+ {
-+ block = addr / mtd->erasesize;
-+#ifdef CONFIG_MTD_SL2312_SERIAL_ST
-+ ret = mapserial_erase_block(map,addr);
-+#else
-+ ret = mapserial_erase_block(map,block);
-+#endif
-+ addr = addr + mtd->erasesize;
-+ len = len - mtd->erasesize;
-+ }
-+ return (ret);
-+}
-+
-+static int mapserial_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
-+{
-+ struct map_info *map = (struct map_info *)mtd->priv;
-+// printk("mapserial_read : \n");
-+ map->copy_from(map, buf, from, len);
-+ *retlen = len;
-+ return 0;
-+}
-+
-+static void mapserial_nop(struct mtd_info *mtd)
-+{
-+ /* Nothing to see here */
-+}
-+
-+static int mapserial_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
-+{
-+ struct map_info *map = (struct map_info *)mtd->priv;
-+// printk("mapserial_write : buf %x to %x len %x \n",(int)buf, (int)to, (int)len);
-+ //map->copy_to(map, buf, to, len);
-+ map->copy_to(map, to, buf, len);
-+ *retlen = len;
-+ return 0;
-+}
-+
-+int __init map_serial_init(void)
-+{
-+ register_mtd_chip_driver(&mapserial_chipdrv);
-+ return 0;
-+}
-+
-+static void __exit map_serial_exit(void)
-+{
-+ unregister_mtd_chip_driver(&mapserial_chipdrv);
-+}
-+
-+module_init(map_serial_init);
-+module_exit(map_serial_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
-+MODULE_DESCRIPTION("MTD chip driver for ROM chips");
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -614,5 +614,30 @@ config MTD_PLATRAM
-
- This selection automatically selects the map_ram driver.
-
-+#***************************************************************************************
-+# Storlink parallel/Serial Flash configuration
-+#***************************************************************************************
-+config MTD_SL2312_CFI
-+ tristate "CFI Flash device mapped on SL2312"
-+ depends on MTD_CFI
-+ help
-+ Map driver for SL2312 demo board.
-+
-+config MTD_SL2312_SERIAL_ATMEL
-+ tristate "ATMEL Serial Flash device mapped on SL2312"
-+ depends on MTD_PARTITIONS && ARCH_SL2312
-+ help
-+ Map driver for SL2312 demo board.
-+
-+config MTD_SL2312_SERIAL_ST
-+ tristate "ST Serial Flash device mapped on SL2312"
-+ depends on MTD_PARTITIONS && ARCH_SL2312
-+ help
-+ Map driver for SL2312 demo board.
-+
-+config SL2312_SHARE_PIN
-+ tristate "Parallel Flash share pin on SL2312 ASIC"
-+ depends on SL3516_ASIC
-+
- endmenu
-
---- /dev/null
-+++ b/drivers/mtd/maps/sl2312-flash-atmel.c
-@@ -0,0 +1,554 @@
-+/*
-+ * $Id: sl2312-flash-atmel.c,v 1.2 2006/06/05 02:35:57 middle Exp $
-+ *
-+ * Flash and EPROM on Hitachi Solution Engine and similar boards.
-+ *
-+ * (C) 2001 Red Hat, Inc.
-+ *
-+ * GPL'd
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+
-+#include <asm/io.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/partitions.h>
-+#include <asm/hardware.h>
-+
-+#include <asm/arch/sl2312.h>
-+#include <asm/arch/flash.h>
-+#include <linux/init.h> //add
-+
-+
-+#define g_page_addr AT45DB321_PAGE_SHIFT //321 : shift 10 ; 642 : shift 11
-+#define g_chipen SERIAL_FLASH_CHIP0_EN //atmel
-+
-+extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts);
-+
-+void address_to_page(__u32 address, __u16 *page, __u16 *offset)
-+{
-+ *page = address / SPAGE_SIZE;
-+ *offset = address % SPAGE_SIZE;
-+}
-+
-+static __u32 read_flash_ctrl_reg(__u32 ofs)
-+{
-+ __u32 *base;
-+
-+ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
-+ return __raw_readl(base);
-+}
-+
-+static void write_flash_ctrl_reg(__u32 ofs,__u32 data)
-+{
-+ __u32 *base;
-+
-+ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
-+ __raw_writel(data, base);
-+}
-+
-+void atmel_read_status(__u8 cmd, __u8 *data)
-+{
-+ __u32 opcode;
-+ __u32 value;
-+
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | cmd | g_chipen;
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(opcode&0x80000000)
-+ {
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+
-+ value=read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ *data = value & 0xff;
-+}
-+
-+void main_memory_page_read(__u8 cmd, __u16 page, __u16 offset, __u8 *data)
-+{
-+ __u32 opcode;
-+ __u32 address;
-+ __u32 value;
-+
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_4X_DATA | cmd | g_chipen;
-+ address = (page << g_page_addr) + offset;
-+ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(opcode&0x80000000)
-+ {
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+
-+ value=read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ *data = value & 0xff;
-+}
-+
-+void buffer_to_main_memory(__u8 cmd, __u16 page)
-+{
-+ __u32 opcode;
-+ __u32 address;
-+ __u8 status;
-+
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd | g_chipen;
-+ address = (page << g_page_addr);
-+ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(opcode&0x80000000)
-+ {
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ atmel_read_status(READ_STATUS_SPI, &status);
-+ while(!(status&0x80))
-+ {
-+ atmel_read_status(READ_STATUS_SPI, &status);
-+ flash_delay();
-+ schedule();
-+ }
-+
-+}
-+
-+
-+void atmel_flash_read_page(__u32 address, __u8 *buffer, __u32 len)
-+{
-+ __u8 byte;
-+ __u16 page, offset;
-+ __u16 i;
-+
-+ address_to_page(address, &page, &offset);
-+
-+ for(i=0; i<len; i++,offset++)
-+ {
-+ main_memory_page_read(MAIN_MEMORY_PAGE_READ_SPI , page, offset, &byte);
-+ buffer [i]= byte;
-+ }
-+}
-+
-+void atmel_flash_program_page(__u32 address, __u8 *buffer, __u32 len)
-+{
-+ __u8 pattern;
-+ __u16 page, offset;
-+ __u32 i;
-+
-+ address_to_page(address, &page, &offset);
-+ // printk("atmel_flash_program_page: offset %x len %x page %x \n", offset, len, page);
-+
-+ if(offset)
-+ main_memory_to_buffer(MAIN_MEMORY_TO_BUFFER1,page);
-+
-+ for(i=0; i<len; i++,offset++)
-+ {
-+ pattern = buffer[i];
-+ atmel_buffer_write(BUFFER1_WRITE,offset,pattern);
-+ }
-+
-+ // printk("atmel_flash_program_page: offset %x \n", offset);
-+ buffer_to_main_memory(BUFFER1_TO_MAIN_MEMORY, page);
-+ // printk("atmel_flash_program_page: buffer_to_main_memory %x page\n", page);
-+
-+}
-+
-+
-+void main_memory_to_buffer(__u8 cmd, __u16 page)
-+{
-+ __u32 opcode;
-+ __u32 address;
-+ __u8 status;
-+
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd | g_chipen;
-+ address = (page << g_page_addr);
-+ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(opcode&0x80000000)
-+ {
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ atmel_read_status(READ_STATUS_SPI, &status);
-+ while(!(status&0x80))
-+ {
-+ atmel_read_status(READ_STATUS_SPI, &status);
-+ flash_delay();
-+ schedule();
-+ }
-+
-+}
-+
-+void main_memory_page_program(__u8 cmd, __u16 page, __u16 offset, __u8 data)
-+{
-+ __u32 opcode;
-+ __u32 address;
-+ __u8 status;
-+
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | cmd | g_chipen;
-+ address = (page << g_page_addr) + offset;
-+ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+ write_flash_ctrl_reg(FLASH_WRITE_DATA_OFFSET, data);
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(opcode&0x80000000)
-+ {
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ atmel_read_status(READ_STATUS_SPI, &status);
-+ while(!(status&0x80))
-+ {
-+ atmel_read_status(READ_STATUS_SPI, &status);
-+ flash_delay();
-+ schedule();
-+ }
-+}
-+
-+void atmel_buffer_write(__u8 cmd, __u16 offset, __u8 data)
-+{
-+ __u32 opcode;
-+ __u32 address;
-+
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | cmd | g_chipen;
-+ address = offset;
-+ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+ write_flash_ctrl_reg(FLASH_WRITE_DATA_OFFSET, data);
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(opcode&0x80000000)
-+ {
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+
-+}
-+
-+void atmel_erase_page(__u8 cmd, __u16 page)
-+{
-+ __u32 opcode;
-+ __u32 address;
-+ __u8 status;
-+
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd | g_chipen;
-+ address = (page << g_page_addr);
-+ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(opcode&0x80000000)
-+ {
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ atmel_read_status(READ_STATUS_SPI, &status);
-+ while(!(status&0x80))
-+ {
-+ atmel_read_status(READ_STATUS_SPI, &status);
-+ flash_delay();
-+ schedule();
-+ }
-+
-+}
-+
-+void atmel_erase_block(__u8 cmd, __u16 block)
-+{
-+ __u32 opcode;
-+ __u32 address;
-+ __u8 status;
-+
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd | g_chipen;
-+ address = (block << 13);
-+ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(opcode&0x80000000)
-+ {
-+ opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ atmel_read_status(READ_STATUS_SPI, &status);
-+ while(!(status&0x80))
-+ {
-+ atmel_read_status(READ_STATUS_SPI, &status);
-+ flash_delay();
-+ schedule();
-+ }
-+
-+}
-+
-+void flash_delay(void)
-+{
-+ int i;
-+
-+ for(i=0; i<50; i++)
-+ i=i;
-+}
-+
-+
-+
-+
-+__u32 sl2312_read32(struct map_info *map, unsigned long ofs)
-+{
-+
-+#if 0
-+ __u16 page, offset;
-+ __u32 pattern;
-+ __u8 byte, i;
-+
-+ pattern = 0;
-+ address_to_page(ofs, &page, &offset);
-+ for(i=0; i<4; i++, offset++)
-+ {
-+ pattern = pattern << 8;
-+ main_memory_page_read(MAIN_MEMORY_PAGE_READ_SPI , page, offset, &byte);
-+//printk("sl2312_read32:: address = %08x data = %c \n",ofs,byte);
-+ pattern += byte;
-+ }
-+ return pattern;
-+#else
-+ return read_flash_ctrl_reg(ofs);
-+#endif
-+
-+}
-+
-+__u8 sl2312_read8(struct map_info *map, unsigned long ofs)
-+{
-+ __u16 page, offset;
-+ __u8 byte;
-+
-+ address_to_page(ofs, &page, &offset);
-+ main_memory_page_read(MAIN_MEMORY_PAGE_READ_SPI , page, offset, &byte);
-+ //printk("sl2312_read8:: address = %08x data = %c \n",ofs,byte);
-+ return byte;
-+
-+}
-+
-+void sl2312_write32(struct map_info *map, __u32 d, unsigned long ofs)
-+{
-+#if 0
-+ __u16 page, offset;
-+ __u8 byte, i;
-+
-+ address_to_page(ofs, &page, &offset);
-+ for(i=0; i<4; i++, offset++)
-+ {
-+ byte = d & 0xff;
-+ main_memory_page_program(MAIN_MEMORY_PROGRAM_BUFFER1, page, offset, byte);
-+ d = d >> 8;
-+//printk("sl2312_write32:: address = %08x data = %c \n",ofs,byte);
-+ }
-+#else
-+ write_flash_ctrl_reg(ofs, d);
-+#endif
-+}
-+
-+void sl2312_write8(struct map_info *map, __u8 d, unsigned long ofs)
-+{
-+ __u16 page, offset;
-+
-+ address_to_page(ofs, &page, &offset);
-+ main_memory_page_program(MAIN_MEMORY_PROGRAM_BUFFER1, page, offset, d);
-+//printk("sl2312_write8:: address = %08x data = %c \n",ofs,d);
-+
-+}
-+
-+void sl2312_copy_from(struct map_info *map, void *buf, unsigned long ofs, ssize_t len)
-+{
-+ __u32 size;
-+ __u8 *buffer;
-+ __u32 length;//i, j,
-+
-+ //printk("sl2312_copy_from:: address = %08x datalen = %d \n",ofs,len);
-+
-+ length = len;
-+ buffer = (__u8 *)buf;
-+ while(len)
-+ {
-+ size = SPAGE_SIZE - (ofs%SPAGE_SIZE);
-+ if(size > len)
-+ size = len;
-+ atmel_flash_read_page(ofs, buffer, size);
-+ buffer+=size;
-+ ofs+=size;
-+ len -= size;
-+ }
-+
-+#if 0
-+ buffer = (__u8 *)buf;
-+ for(i=0; i<length; i+=16)
-+ {
-+ for(j=0; j<16; j++,buffer++)
-+ {
-+ if((i*16+j)<length)
-+ printk("%x ",(int)*buffer);
-+ }
-+ printk("\n");
-+ }
-+
-+ printk("\n");
-+#endif
-+
-+}
-+
-+
-+void sl2312_copy_to(struct map_info *map, unsigned long ofs, void *buf, ssize_t len)
-+{
-+ __u32 size;
-+ __u8 *buffer;
-+
-+ buffer = (__u8 *)buf;
-+ //printk("sl2312_copy_to:offset %x len %x \n", ofs, len);
-+// printk("sl2312_copy_to:buf is %x \n", (int)buf);
-+
-+ while(len)
-+ {
-+ size = SPAGE_SIZE - (ofs%SPAGE_SIZE);
-+ if(size > len)
-+ size = len;
-+ atmel_flash_program_page(ofs, buffer, size);
-+ buffer+=size;
-+ ofs+=size;
-+ len-=size;
-+ }
-+
-+
-+}
-+
-+
-+static struct mtd_info *serial_mtd;
-+
-+static struct mtd_partition *parsed_parts;
-+
-+static struct map_info sl2312_serial_map = {
-+// name: "SL2312 serial flash",
-+// size: 4194304, //0x400000,
-+// //buswidth: 4,
-+// bankwidth: 4,
-+// phys: SL2312_FLASH_BASE,
-+//#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
-+// //read32: sl2312_read32,
-+// //read8: sl2312_read8,
-+// copy_from: sl2312_copy_from,
-+// //write8: sl2312_write8,
-+// //write32: sl2312_write32,
-+// read: sl2312_read32,
-+// write: sl2312_write32,
-+// copy_to: sl2312_copy_to
-+//#endif
-+ .name = "SL2312 serial flash",
-+ .size = 4194304, //0x400000,
-+ //buswidth: 4,
-+ .bankwidth = 4,
-+ .phys = SL2312_FLASH_BASE,
-+#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
-+ //read32: sl2312_read32,
-+ //read8: sl2312_read8,
-+ .copy_from = sl2312_copy_from,
-+ //write8: sl2312_write8,
-+ //write32: sl2312_write32,
-+ .read = sl2312_read32,
-+ .write = sl2312_write32,
-+ .copy_to = sl2312_copy_to
-+#endif
-+};
-+
-+
-+
-+static struct mtd_partition sl2312_partitions[] = {
-+
-+
-+ ///* boot code */
-+ //{ name: "bootloader", offset: 0x00000000, size: 0x20000, },
-+ ///* kernel image */
-+ //{ name: "kerel image", offset: 0x000020000, size: 0x2E0000 },
-+ ///* All else is writable (e.g. JFFS) */
-+ //{ name: "user data", offset: 0x00300000, size: 0x00100000, },
-+ /* boot code */
-+ { .name = "bootloader", .offset = 0x00000000, .size = 0x20000, },
-+ /* kernel image */
-+ { .name = "kerel image", .offset = 0x000020000, .size = 0xE0000 },
-+ /* All else is writable (e.g. JFFS) */
-+ { .name = "user data", .offset = 0x00100000, .size = 0x00300000, },
-+
-+
-+};
-+
-+
-+
-+static int __init init_sl2312_maps(void)
-+{
-+ int nr_parts = 0;
-+ struct mtd_partition *parts;
-+
-+ serial_mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
-+ if (!serial_mtd)
-+ return NULL;
-+
-+ memset(serial_mtd, 0, sizeof(struct mtd_info));
-+ //sl2312flash_map.virt = (unsigned long)ioremap(SL2312_FLASH_BASE, FLASH_SIZE);
-+ //sl2312_serial_map.map_priv_1 = (unsigned long)ioremap(SL2312_FLASH_BASE, SFLASH_SIZE);//(unsigned long)FLASH_VBASE;
-+ sl2312_serial_map.virt = (unsigned long)ioremap(SL2312_FLASH_BASE, SFLASH_SIZE);//(unsigned long)ioremap(FLASH_START, SFLASH_SIZE);
-+ if (!sl2312_serial_map.virt) {
-+ printk(" failed to ioremap \n");
-+ return -EIO;
-+ }
-+ serial_mtd = do_map_probe("map_serial", &sl2312_serial_map);
-+ if (serial_mtd) {
-+ //serial_mtd->module = THIS_MODULE;
-+ serial_mtd->owner = THIS_MODULE;
-+
-+ }
-+
-+#ifdef CONFIG_MTD_REDBOOT_PARTS
-+ nr_parts = parse_redboot_partitions(serial_mtd, &parsed_parts);
-+ if (nr_parts > 0)
-+ printk(KERN_NOTICE "Found RedBoot partition table.\n");
-+ else if (nr_parts < 0)
-+ printk(KERN_NOTICE "Error looking for RedBoot partitions.\n");
-+#else
-+ parsed_parts = sl2312_partitions;
-+ parts = sl2312_partitions;
-+ nr_parts = sizeof(sl2312_partitions)/sizeof(*parts);
-+ nr_parts = sizeof(sl2312_partitions)/sizeof(*parsed_parts);
-+#endif /* CONFIG_MTD_REDBOOT_PARTS */
-+
-+ if (nr_parts > 0)
-+ add_mtd_partitions(serial_mtd, parsed_parts, nr_parts);
-+ else
-+ add_mtd_device(serial_mtd);
-+
-+ return 0;
-+}
-+
-+static void __exit cleanup_sl2312_maps(void)
-+{
-+ if (parsed_parts)
-+ del_mtd_partitions(serial_mtd);
-+ else
-+ del_mtd_device(serial_mtd);
-+
-+ map_destroy(serial_mtd);
-+
-+
-+}
-+
-+module_init(init_sl2312_maps);
-+module_exit(cleanup_sl2312_maps);
-+
-+
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Plus Chen <plus@storlink.com.tw>");
-+MODULE_DESCRIPTION("MTD map driver for Storlink Sword boards");
-+
---- /dev/null
-+++ b/drivers/mtd/maps/sl2312-flash-cfi.c
-@@ -0,0 +1,370 @@
-+/*======================================================================
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the Free Software
-+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+======================================================================*/
-+
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/ioport.h>
-+#include <linux/init.h>
-+#include <linux/string.h>
-+
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/partitions.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/io.h>
-+#include <asm/system.h>
-+#include <asm/arch/sl2312.h>
-+#include <linux/mtd/kvctl.h>
-+#include "sl2312_flashmap.h"
-+
-+
-+//extern int parse_afs_partitions(struct mtd_info *, struct mtd_partition **);
-+
-+/* the base address of FLASH control register */
-+#define FLASH_CONTROL_BASE_ADDR (IO_ADDRESS(SL2312_FLASH_CTRL_BASE))
-+#define SL2312_GLOBAL_BASE_ADDR (IO_ADDRESS(SL2312_GLOBAL_BASE))
-+
-+/* define read/write register utility */
-+#define FLASH_READ_REG(offset) (__raw_readl(offset+FLASH_CONTROL_BASE_ADDR))
-+#define FLASH_WRITE_REG(offset,val) (__raw_writel(val,offset+FLASH_CONTROL_BASE_ADDR))
-+
-+/* the offset of FLASH control register */
-+enum EMAC_REGISTER {
-+ FLASH_ID = 0x0000,
-+ FLASH_STATUS = 0x0008,
-+ FLASH_TYPE = 0x000c,
-+ FLASH_ACCESS = 0x0020,
-+ FLASH_ADDRESS = 0x0024,
-+ FLASH_DATA = 0x0028,
-+ FLASH_TIMING = 0x002c,
-+};
-+
-+//#define FLASH_BASE FLASH_CONTROL_BASE_ADDR
-+//#define FLASH_SIZE 0x00800000 //INTEGRATOR_FLASH_SIZE
-+
-+//#define FLASH_PART_SIZE 8388608
-+
-+static unsigned int flash_indirect_access = 0;
-+
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+static unsigned int chip_en = 0x00000000;
-+
-+void sl2312flash_enable_parallel_flash(void)
-+{
-+ unsigned int reg_val;
-+
-+ reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
-+ reg_val = reg_val & 0xfffffffd;
-+ writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
-+ return;
-+}
-+
-+void sl2312flash_disable_parallel_flash(void)
-+{
-+ unsigned int reg_val;
-+
-+ reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
-+ reg_val = reg_val | 0x00000002;
-+ writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
-+ return;
-+}
-+#endif
-+
-+
-+static struct map_info sl2312flash_map =
-+{
-+ name: "SL2312 CFI Flash",
-+ size: FLASH_SIZE,
-+ bankwidth: 2,
-+ //bankwidth: 1, //for 8 bits width
-+ phys: SL2312_FLASH_BASE,
-+};
-+
-+static struct mtd_info *mtd;
-+#if 0
-+static struct mtd_partition sl2312_partitions[] = {
-+ /* boot code */
-+ {
-+ name: "bootloader",
-+ offset: 0x00000000,
-+ size: 0x20000,
-+// mask_flags: MTD_WRITEABLE,
-+ },
-+ /* kernel image */
-+ {
-+ name: "kerel image",
-+ offset: 0x00020000,
-+ size: 0x2E0000
-+ },
-+ /* All else is writable (e.g. JFFS) */
-+ {
-+ name: "user data",
-+ offset: 0x00300000,
-+ size: 0x00100000,
-+ }
-+};
-+#endif
-+
-+
-+
-+static int __init sl2312flash_init(void)
-+{
-+ struct mtd_partition *parts;
-+ int nr_parts = 0;
-+ int ret;
-+#ifndef CONFIG_SL2312_SHARE_PIN
-+ unsigned int reg_val;
-+#endif
-+
-+ printk("SL2312 MTD Driver Init.......\n");
-+
-+#ifndef CONFIG_SL2312_SHARE_PIN
-+ /* enable flash */
-+ reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
-+ reg_val = reg_val & 0xfffffffd;
-+ writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
-+#else
-+ sl2312flash_enable_parallel_flash(); /* enable Parallel FLASH */
-+#endif
-+ FLASH_WRITE_REG(FLASH_ACCESS,0x00004000); /* parallel flash direct access mode */
-+ ret = FLASH_READ_REG(FLASH_ACCESS);
-+ if (ret == 0x00004000)
-+ {
-+ flash_indirect_access = 0; /* parallel flash direct access */
-+ }
-+ else
-+ {
-+ flash_indirect_access = 1; /* parallel flash indirect access */
-+ }
-+
-+ /*
-+ * Also, the CFI layer automatically works out what size
-+ * of chips we have, and does the necessary identification
-+ * for us automatically.
-+ */
-+#ifdef CONFIG_GEMINI_IPI
-+ sl2312flash_map.virt = FLASH_VBASE;//(unsigned int *)ioremap(SL2312_FLASH_BASE, FLASH_SIZE);
-+#else
-+ sl2312flash_map.virt = (unsigned int *)ioremap(SL2312_FLASH_BASE, FLASH_SIZE);
-+#endif
-+ //printk("sl2312flash_map.virt = %08x\n",(unsigned int)sl2312flash_map.virt);
-+
-+// simple_map_init(&sl2312flash_map);
-+
-+ mtd = do_map_probe("cfi_probe", &sl2312flash_map);
-+ if (!mtd)
-+ {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ sl2312flash_disable_parallel_flash(); /* disable Parallel FLASH */
-+#endif
-+ return -ENXIO;
-+ }
-+ mtd->owner = THIS_MODULE;
-+// mtd->erase = flash_erase;
-+// mtd->read = flash_read;
-+// mtd->write = flash_write;
-+
-+ parts = sl2312_partitions;
-+ nr_parts = sizeof(sl2312_partitions)/sizeof(*parts);
-+ ret = add_mtd_partitions(mtd, parts, nr_parts);
-+ /*If we got an error, free all resources.*/
-+ if (ret < 0) {
-+ del_mtd_partitions(mtd);
-+ map_destroy(mtd);
-+ }
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ sl2312flash_disable_parallel_flash(); /* disable Parallel FLASH */
-+#endif
-+ printk("SL2312 MTD Driver Init Success ......\n");
-+ return ret;
-+}
-+
-+static void __exit sl2312flash_exit(void)
-+{
-+ if (mtd) {
-+ del_mtd_partitions(mtd);
-+ map_destroy(mtd);
-+ }
-+
-+ if (sl2312flash_map.virt) {
-+ iounmap((void *)sl2312flash_map.virt);
-+ sl2312flash_map.virt = 0;
-+ }
-+}
-+
-+char chrtohex(char c)
-+{
-+ char val;
-+ if ((c >= '0') && (c <= '9'))
-+ {
-+ val = c - '0';
-+ return val;
-+ }
-+ else if ((c >= 'a') && (c <= 'f'))
-+ {
-+ val = 10 + (c - 'a');
-+ return val;
-+ }
-+ else if ((c >= 'A') && (c <= 'F'))
-+ {
-+ val = 10 + (c - 'A');
-+ return val;
-+ }
-+ printk("<1>Error number\n");
-+ return 0;
-+}
-+
-+
-+int get_vlaninfo(vlaninfo* vlan)
-+{
-+ vctl_mheader head;
-+ vctl_entry entry;
-+ struct mtd_info *mymtd=NULL;
-+ int i, j, loc = 0;
-+ char *payload=0, *tmp1, *tmp2, tmp3[9];
-+ size_t retlen;
-+
-+ #ifdef CONFIG_SL2312_SHARE_PIN
-+ sl2312flash_enable_parallel_flash();
-+ #endif
-+ for(i=0;i<MAX_MTD_DEVICES;i++)
-+ {
-+ mymtd=get_mtd_device(NULL,i);
-+ // printk("mymtd->name: %s\n", mymtd->name);
-+ if(mymtd && !strcmp(mymtd->name,"VCTL"))
-+ {
-+ // printk("%s\n", mymtd->name);
-+ break;
-+ }
-+ }
-+ if( i >= MAX_MTD_DEVICES)
-+ {
-+ printk("Can't find version control\n");
-+ #ifdef CONFIG_SL2312_SHARE_PIN
-+ sl2312flash_disable_parallel_flash();
-+ #endif
-+ return 0;
-+ }
-+
-+ if (!mymtd | !mymtd->read)
-+ {
-+ printk("<1>Can't read Version Configuration\n");
-+ #ifdef CONFIG_SL2312_SHARE_PIN
-+ sl2312flash_disable_parallel_flash();
-+ #endif
-+ return 0;
-+ }
-+
-+ mymtd->read(mymtd, 0, VCTL_HEAD_SIZE, &retlen, (u_char*)&head);
-+ // printk("entry header: %c%c%c%c\n", head.header[0], head.header[1], head.header[2], head.header[3]);
-+ // printk("entry number: %x\n", head.entry_num);
-+ if ( strncmp(head.header, "FLFM", 4) )
-+ {
-+ printk("VCTL is a erase block\n");
-+ #ifdef CONFIG_SL2312_SHARE_PIN
-+ sl2312flash_disable_parallel_flash();
-+ #endif
-+ return 0;
-+ }
-+ loc += retlen;
-+ for (i = 0; i < head.entry_num; i++)
-+ {
-+ mymtd->read(mymtd, loc, VCTL_ENTRY_LEN, &retlen, (u_char*)&entry);
-+ // printk("type: %x\n", entry.type);
-+ // printk("size: %x\n", entry.size);
-+ strncpy(tmp3, entry.header, 4);
-+ if (entry.type == VCT_VLAN)
-+ {
-+ for (j = 0; j < 6 ; j++)
-+ {
-+ vlan[0].mac[j] = 0;
-+ vlan[1].mac[j] = 0;
-+ }
-+ vlan[0].vlanid = 1;
-+ vlan[1].vlanid = 2;
-+ vlan[0].vlanmap = 0x7F;
-+ vlan[1].vlanmap = 0x80;
-+
-+ payload = (char *)kmalloc(entry.size - VCTL_ENTRY_LEN, GFP_KERNEL);
-+ loc += VCTL_ENTRY_LEN;
-+ mymtd->read(mymtd, loc, entry.size - VCTL_ENTRY_LEN, &retlen, payload);
-+ // printk("%s\n", payload);
-+ tmp1 = strstr(payload, "MAC1:");
-+ tmp2 = strstr(payload, "MAC2:");
-+ if(!tmp1||!tmp2){
-+ kfree(payload);
-+ #ifdef CONFIG_SL2312_SHARE_PIN
-+ sl2312flash_disable_parallel_flash();
-+ #endif
-+ printk("Error VCTL format!!\n");
-+ return 0;
-+ }
-+ tmp1 += 7;
-+ tmp2 += 7;
-+
-+
-+ for (j = 0; j < 6; j++)
-+ {
-+ vlan[0].mac[j] = chrtohex(tmp1[2*j])*16 + chrtohex(tmp1[(2*j)+1]);
-+ vlan[1].mac[j] = chrtohex(tmp2[2*j])*16 + chrtohex(tmp2[(2*j)+1]);
-+ }
-+ tmp1 = strstr(payload, "ID1:");
-+ tmp2 = strstr(payload, "ID2:");
-+ tmp1 += 4;
-+ tmp2 += 4;
-+ vlan[0].vlanid = tmp1[0] - '0';
-+ vlan[1].vlanid = tmp2[0] - '0';
-+ tmp1 = strstr(payload, "MAP1:");
-+ tmp2 = strstr(payload, "MAP2:");
-+ tmp1 += 7;
-+ tmp2 += 7;
-+ vlan[0].vlanmap = chrtohex(tmp1[0]) * 16 + chrtohex(tmp1[1]);
-+ vlan[1].vlanmap = chrtohex(tmp2[0]) * 16 + chrtohex(tmp2[1]);
-+ // printk("Vlan1 id:%x map:%02x mac:%x%x%x%x%x%x\n", vlan[0].vlanid, vlan[0].vlanmap, vlan[0].mac[0], vlan[0].mac[1], vlan[0].mac[2], vlan[0].mac[3], vlan[0].mac[4], vlan[0].mac[5]);
-+ // printk("Vlan2 id:%x map:%02x mac:%x%x%x%x%x%x\n", vlan[1].vlanid, vlan[1].vlanmap, vlan[1].mac[0], vlan[1].mac[1], vlan[1].mac[2], vlan[1].mac[3], vlan[1].mac[4], vlan[1].mac[5]);
-+ break;
-+ }
-+ loc += entry.size;
-+ }
-+ if ( entry.type == VCT_VLAN )
-+ {
-+ #ifdef CONFIG_SL2312_SHARE_PIN
-+ sl2312flash_disable_parallel_flash();
-+ #endif
-+ kfree(payload);
-+ return 1;
-+ }
-+ if (i >= head.entry_num)
-+ printk("Can't find vlan information\n");
-+ #ifdef CONFIG_SL2312_SHARE_PIN
-+ sl2312flash_disable_parallel_flash();
-+ #endif
-+ return 0;
-+}
-+
-+EXPORT_SYMBOL(get_vlaninfo);
-+
-+
-+module_init(sl2312flash_init);
-+module_exit(sl2312flash_exit);
-+
-+MODULE_AUTHOR("Storlink Ltd");
-+MODULE_DESCRIPTION("CFI map driver");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/mtd/maps/sl2312-flash-m25p80.c
-@@ -0,0 +1,498 @@
-+/*
-+ * $Id: sl2312-flash-m25p80.c,v 1.2 2006/06/02 08:46:02 middle Exp $
-+ *
-+ * Flash and EPROM on Hitachi Solution Engine and similar boards.
-+ *
-+ * (C) 2001 Red Hat, Inc.
-+ *
-+ * GPL'd
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+
-+#include <asm/io.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/partitions.h>
-+#include <asm/hardware.h>
-+
-+#include <asm/arch/sl2312.h>
-+#include <asm/arch/flash.h>
-+#include <linux/init.h> //add
-+#define g_chipen SERIAL_FLASH_CHIP0_EN //ST
-+
-+//static int m25p80_page_program(__u32 address, __u8 data, __u32 schip_en);
-+static void m25p80_write_cmd(__u8 cmd, __u32 schip_en);
-+extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts);
-+
-+
-+static __u32 read_flash_ctrl_reg(__u32 ofs)
-+{
-+ __u32 *base;
-+
-+ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
-+ return __raw_readl(base);
-+}
-+
-+static void write_flash_ctrl_reg(__u32 ofs,__u32 data)
-+{
-+ __u32 *base;
-+
-+ base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
-+ __raw_writel(data, base);
-+}
-+
-+static void m25p80_read(__u32 address, __u8 *data, __u32 schip_en)
-+{
-+ __u32 opcode,status;
-+ __u32 value;
-+
-+ //opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ;
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | M25P80_READ;
-+ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+
-+ opcode|=g_chipen;
-+
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ status=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(status&0x80000000)
-+ {
-+ status=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+
-+ value=read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ *data = value & 0xff;
-+}
-+
-+static int m25p80_page_program(__u32 address, __u8 *data, __u32 schip_en)
-+{
-+ __u32 opcode;
-+ __u32 status;
-+ __u32 tmp;
-+ int res = FLASH_ERR_OK;
-+ //volatile FLASH_DATA_T* data_ptr = (volatile FLASH_DATA_T*) data;
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
-+
-+ opcode|=g_chipen;
-+
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(tmp&0x80000000)
-+ {
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ //middle delay_ms(130);
-+ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ if((status&0x02)==0x02)
-+ {
-+ //middle delay_ms(100);
-+ m25p80_write_cmd(M25P80_WRITE_DISABLE, schip_en);
-+ }
-+
-+
-+ m25p80_write_cmd(M25P80_WRITE_ENABLE, schip_en);
-+ ////middle delay_ms(10);
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | M25P80_PAGE_PROGRAM;
-+ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+ write_flash_ctrl_reg(FLASH_WRITE_DATA_OFFSET, *data);
-+
-+ //status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ //while(status!=data)
-+ //{
-+ // status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ // //middle delay_ms(10);
-+ //}
-+
-+ opcode|=g_chipen;
-+
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(tmp&0x80000000)
-+ {
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ //opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
-+
-+ opcode|=g_chipen;
-+
-+
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(tmp&0x80000000)
-+ {
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ //while(status&0xfd)
-+ while(status&0x01)
-+ {
-+ //if((status&0x9c)!=0)
-+ // printf(" m25p80_page_program Protect Status = %x\n",status);
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(tmp&0x80000000)
-+ {
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ flash_delay();
-+ schedule();
-+ //middle delay_ms(50);
-+ }
-+ //printf("status = %x, data = %x\n",status,data);
-+ if((status&0x02)==0x02)
-+ {
-+ //middle delay_ms(100);
-+ m25p80_write_cmd(M25P80_WRITE_DISABLE, schip_en);
-+ }
-+ //};//while (len > 0)
-+ return res;
-+}
-+
-+void m25p80_copy_from(struct map_info *map, void *buf, unsigned long ofs, ssize_t len)
-+{
-+// __u32 size;
-+ __u8 *buffer;
-+ __u32 length;//i, j,
-+
-+ length = len;
-+ buffer = (__u8 *)buf;
-+ while(len)
-+ {
-+ m25p80_read(ofs, buffer, g_chipen);
-+ buffer++;
-+ ofs++;
-+ len --;
-+ } ;
-+
-+}
-+
-+__u32 m25p80_read32(struct map_info *map, unsigned long ofs)
-+{
-+
-+ return read_flash_ctrl_reg(ofs);
-+
-+
-+}
-+
-+void m25p80_write32(struct map_info *map, __u32 d, unsigned long ofs)
-+{
-+
-+ write_flash_ctrl_reg(ofs, d);
-+
-+}
-+
-+void m25p80_copy_to(struct map_info *map, unsigned long ofs, void *buf, ssize_t len)
-+{
-+ __u32 size, i, ret;
-+
-+ while(len > 0)
-+ {
-+ if(len >= M25P80_PAGE_SIZE)
-+ size = M25P80_PAGE_SIZE;
-+ else
-+ size = len;
-+
-+ for(i=0;i<size;i++)
-+ {
-+ ret = m25p80_page_program( (ofs+i), (buf+i), g_chipen);
-+ }
-+ buf+=M25P80_PAGE_SIZE;
-+ ofs+=M25P80_PAGE_SIZE;
-+ len-=M25P80_PAGE_SIZE;
-+
-+ };
-+
-+
-+}
-+
-+static struct mtd_info *serial_mtd;
-+
-+static struct mtd_partition *parsed_parts;
-+
-+static struct map_info m25p80_map = {
-+
-+ .name = "SL2312 serial flash m25p80",
-+ .size = 1048576, //0x100000,
-+ //buswidth: 4,
-+ .bankwidth = 4,
-+ .phys = SL2312_FLASH_BASE,
-+#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
-+ .copy_from = m25p80_copy_from,
-+ .read = m25p80_read32,
-+ .write = m25p80_write32,
-+ .copy_to = m25p80_copy_to
-+#endif
-+};
-+
-+
-+
-+static struct mtd_partition m25p80_partitions[] = {
-+
-+ /* boot code */
-+ { .name = "bootloader", .offset = 0x00000000, .size = 0x20000, },
-+ /* kernel image */
-+ { .name = "kerel image", .offset = 0x000020000, .size = 0xC0000 },
-+ /* All else is writable (e.g. JFFS) */
-+ { .name = "user data", .offset = 0x000E0000, .size = 0x00010000, },
-+
-+
-+};
-+
-+void flash_delay()
-+{
-+ int i,j;
-+ for(i=0;i<0x100;i++)
-+ j=i*3+5;
-+}
-+
-+int m25p80_sector_erase(__u32 address, __u32 schip_en)
-+{
-+ __u32 opcode;
-+ __u32 status;
-+ __u32 tmp;
-+ int res = FLASH_ERR_OK;
-+ //printf("\n-->m25p80_sector_erase");
-+ if(address >= FLASH_START)
-+ address-=FLASH_START;
-+
-+ m25p80_write_cmd(M25P80_WRITE_ENABLE, schip_en);
-+ //printf("\n m25p80_sector_erase : after we-en");
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | M25P80_SECTOR_ERASE;
-+ write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
-+ #ifdef MIDWAY_DIAG
-+ opcode|=schip_en;
-+ #endif
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(tmp&0x80000000)
-+ {
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
-+ #ifdef MIDWAY_DIAG
-+ opcode|=schip_en;
-+ #endif
-+
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(tmp&0x80000000)
-+ {
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ //while(status&0xfd)
-+ while(status&0x01)
-+ {
-+ //if((status&0x9c)!=0)
-+ // printf(" m25p80_sector_erase Protect Status = %x\n",status);
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(tmp&0x80000000)
-+ {
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ flash_delay();
-+ schedule();
-+ //middle delay_ms(50);
-+ }
-+ if((status&0x02)==0x02)
-+ {
-+ //middle delay_ms(100);
-+ m25p80_write_cmd(M25P80_WRITE_DISABLE, schip_en);
-+ }
-+ //printf("\n<--m25p80_sector_erase");
-+ return res;
-+}
-+
-+static void m25p80_write_cmd(__u8 cmd, __u32 schip_en)
-+{
-+ __u32 opcode,tmp;
-+ __u32 status;
-+
-+
-+
-+
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE | cmd;
-+
-+ opcode|=g_chipen;
-+
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(tmp&0x80000000)
-+ {
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ //////
-+ opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
-+
-+ opcode|=g_chipen;
-+
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(tmp&0x80000000)
-+ {
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ //middle delay_ms(130);
-+ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ //printf("\ncmd =%x status = %x",cmd,status);
-+ if(cmd==M25P80_WRITE_ENABLE)
-+ {
-+ //printf("\n**-->enable** status = %x",status);
-+ //middle delay_ms(100);
-+ while((status&0x03) != 2)
-+ {
-+ //if((status&0x9c)!=0)
-+ // printf(" M25P80_WRITE_ENABLE Protect Status = %x\n",status);
-+
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(tmp&0x80000000)
-+ {
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ //flash_delay();
-+ }
-+ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ //printf("\n**enable** status = %x",status);
-+ flash_delay();
-+ schedule();
-+ //middle delay_ms(100);
-+ }
-+ }
-+ else if(cmd==M25P80_WRITE_DISABLE)
-+ {
-+ //while((status&0x03) == 2)
-+ // printf("\n**disable** status = %x",status);
-+ //middle delay_ms(100);
-+ while((status&0x03) != 0)
-+ {
-+ //m25p80_write_status((status&0xfd),schip_en);
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(tmp&0x80000000)
-+ {
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ //printf("\n**disable** status = %x",status);
-+ flash_delay();
-+ schedule();
-+ //middle delay_ms(50);
-+ }
-+ }
-+ else
-+ {
-+ //while((status&0x01) !=0)
-+ while((status&0x01) !=0)
-+ {
-+ write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ while(tmp&0x80000000)
-+ {
-+ tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
-+ flash_delay();
-+ schedule();
-+ }
-+ status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
-+ flash_delay();
-+ schedule();
-+ //middle delay_ms(50);
-+ }
-+ }
-+ //////
-+
-+ //printf("\n<-- status = %x",status);
-+}
-+
-+static int __init init_sl2312_m25p80(void)
-+{
-+ int nr_parts = 0;
-+ struct mtd_partition *parts;
-+
-+ serial_mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
-+ if (!serial_mtd)
-+ return NULL;
-+
-+ memset(serial_mtd, 0, sizeof(struct mtd_info));
-+ m25p80_map.virt = (unsigned long)ioremap(SL2312_FLASH_BASE, SFLASH_SIZE);//(unsigned long)ioremap(FLASH_START, SFLASH_SIZE);
-+ if (!m25p80_map.virt) {
-+ printk(" failed to ioremap \n");
-+ return -EIO;
-+ }
-+ serial_mtd = do_map_probe("map_serial", &m25p80_map);
-+ if (serial_mtd) {
-+ serial_mtd->owner = THIS_MODULE;
-+
-+ }
-+
-+#ifdef CONFIG_MTD_REDBOOT_PARTS
-+ nr_parts = parse_redboot_partitions(serial_mtd, &parsed_parts);
-+ if (nr_parts > 0)
-+ printk(KERN_NOTICE "Found RedBoot partition table.\n");
-+ else if (nr_parts < 0)
-+ printk(KERN_NOTICE "Error looking for RedBoot partitions.\n");
-+#else
-+ parsed_parts = m25p80_partitions;
-+ parts = m25p80_partitions;
-+ nr_parts = sizeof(m25p80_partitions)/sizeof(*parts);
-+ nr_parts = sizeof(m25p80_partitions)/sizeof(*parsed_parts);
-+#endif /* CONFIG_MTD_REDBOOT_PARTS */
-+
-+ if (nr_parts > 0)
-+ add_mtd_partitions(serial_mtd, parsed_parts, nr_parts);
-+ else
-+ add_mtd_device(serial_mtd);
-+
-+ return 0;
-+}
-+
-+static void __exit cleanup_sl2312_m25p80(void)
-+{
-+ if (parsed_parts)
-+ del_mtd_partitions(serial_mtd);
-+ else
-+ del_mtd_device(serial_mtd);
-+
-+ map_destroy(serial_mtd);
-+
-+
-+}
-+
-+module_init(init_sl2312_m25p80);
-+module_exit(cleanup_sl2312_m25p80);
-+
-+
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Plus Chen <plus@storlink.com.tw>");
-+MODULE_DESCRIPTION("MTD map driver for Storlink Sword boards");
-+
---- /dev/null
-+++ b/drivers/mtd/maps/sl2312_flashmap.h
-@@ -0,0 +1,20 @@
-+/*
-+ * Please note that the name are used in mkflash script. Therefore
-+ * don't change them. If you want to add different partitions, you
-+ * will need to modify mkflash script as well so that the end image
-+ * is what you include here!
-+ *
-+ * Also, the 7th item is always the size, so please don't add extra
-+ * spaces in the name or other items.
-+ *
-+ * - Alan
-+ */
-+
-+static struct mtd_partition sl2312_partitions[] = {
-+ { name: "RedBoot", offset: 0x00000000, size: 0x00020000, },
-+ { name: "kernel", offset: 0x00020000, size: 0x00100000, },
-+ { name: "rootfs", offset: 0x00120000, size: 0x006A0000, },
-+ { name: "VCTL", offset: 0x007C0000, size: 0x00010000, },
-+ { name: "cfg", offset: 0x007D0000, size: 0x00020000, },
-+ { name: "FIS directory", offset: 0x007F0000, size: 0x00010000, }
-+};
---- /dev/null
-+++ b/drivers/mtd/maps/sl2312_flashmap.h.16MB
-@@ -0,0 +1,21 @@
-+/*
-+ * Please note that the name are used in mkflash script. Therefore
-+ * don't change them. If you want to add different partitions, you
-+ * will need to modify mkflash script as well so that the end image
-+ * is what you include here!
-+ *
-+ * Also, the 7th item is always the size, so please don't add extra
-+ * spaces in the name or other items.
-+ *
-+ * - Alan
-+ */
-+
-+static struct mtd_partition sl2312_partitions[] = {
-+ { name: "RedBoot", offset: 0x00000000, size: 0x00020000, },
-+ { name: "Kernel", offset: 0x00020000, size: 0x00300000, },
-+ { name: "Ramdisk", offset: 0x00320000, size: 0x00600000, },
-+ { name: "Application", offset: 0x00920000, size: 0x00600000, },
-+ { name: "VCTL", offset: 0x00F20000, size: 0x00020000, },
-+ { name: "CurConf", offset: 0x00F40000, size: 0x000A0000, },
-+ { name: "FIS directory", offset: 0x00FE0000, size: 0x00020000, }
-+};
---- /dev/null
-+++ b/drivers/mtd/maps/sl2312_flashmap.h.8MB
-@@ -0,0 +1,21 @@
-+/*
-+ * Please note that the name are used in mkflash script. Therefore
-+ * don't change them. If you want to add different partitions, you
-+ * will need to modify mkflash script as well so that the end image
-+ * is what you include here!
-+ *
-+ * Also, the 7th item is always the size, so please don't add extra
-+ * spaces in the name or other items.
-+ *
-+ * - Alan
-+ */
-+
-+static struct mtd_partition sl2312_partitions[] = {
-+ { name: "RedBoot", offset: 0x00000000, size: 0x00020000, },
-+ { name: "Kernel", offset: 0x00020000, size: 0x00200000, },
-+ { name: "Ramdisk", offset: 0x00220000, size: 0x00280000, },
-+ { name: "Application", offset: 0x004A0000, size: 0x00300000, },
-+ { name: "VCTL", offset: 0x007A0000, size: 0x00020000, },
-+ { name: "CurConf", offset: 0x007C0000, size: 0x00020000, },
-+ { name: "FIS directory", offset: 0x007E0000, size: 0x00020000, }
-+};
---- a/drivers/mtd/mtdchar.c
-+++ b/drivers/mtd/mtdchar.c
-@@ -59,6 +59,77 @@ struct mtd_file_info {
- enum mtd_file_modes mode;
- };
-
-+/***********************************************************************
-+/* Storlink SoC -- flash
-+/***********************************************************************/
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+unsigned int share_pin_flag=0; // bit0:FLASH, bit1:UART, bit2:EMAC, bit3-4:IDE
-+unsigned int check_sleep_flag=0; // bit0:FLASH, bit1:IDE
-+static spinlock_t sl2312_flash_lock = SPIN_LOCK_UNLOCKED;
-+EXPORT_SYMBOL(share_pin_flag);
-+int dbg=0;
-+DECLARE_WAIT_QUEUE_HEAD(wq);
-+extern struct wait_queue_head_t *flash_wait;
-+unsigned int flash_req=0;
-+void mtd_lock()
-+{
-+ struct task_struct *tsk = current;
-+ unsigned int value ;
-+ unsigned long flags;
-+ flash_req = 1;
-+ DECLARE_WAITQUEUE(wait, tsk);
-+ add_wait_queue(&wq, &wait);
-+ for(;;)
-+ {
-+ set_task_state(tsk, TASK_INTERRUPTIBLE);
-+ spin_lock_irqsave(&sl2312_flash_lock,flags);
-+ if((share_pin_flag&0x1E)){//||(check_sleep_flag&0x00000002)) {
-+ spin_unlock_irqrestore(&sl2312_flash_lock, flags);
-+ check_sleep_flag |= 0x00000001;
-+ if(dbg)
-+ printk("mtd yield %x %x\n",share_pin_flag,check_sleep_flag);
-+ wake_up_interruptible(&flash_wait);
-+ schedule();
-+ }
-+ else {
-+ check_sleep_flag &= ~0x01;
-+ share_pin_flag |= 0x00000001 ; // set share pin flag
-+ spin_unlock_irqrestore(&sl2312_flash_lock, flags);
-+ value = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
-+ value = value & (~PFLASH_SHARE_BIT) ;
-+ writel(value,IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
-+ if(dbg)
-+ printk("mtd Go %x %x\n",share_pin_flag,check_sleep_flag);
-+ tsk->state = TASK_RUNNING;
-+ remove_wait_queue(&wq, &wait);
-+ return ;
-+ }
-+ }
-+}
-+
-+void mtd_unlock()
-+{
-+ unsigned int value ;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&sl2312_flash_lock,flags); // Disable IRQ
-+ value = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
-+ value = value | PFLASH_SHARE_BIT ; // Disable Flash PADs
-+ writel(value,IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
-+ share_pin_flag &= ~(0x00000001); // clear share pin flag
-+ check_sleep_flag &= ~0x00000001;
-+ spin_unlock_irqrestore(&sl2312_flash_lock, flags); // Restore IRQ
-+ if (check_sleep_flag & 0x00000002)
-+ {
-+ check_sleep_flag &= ~(0x00000002);
-+ wake_up_interruptible(&flash_wait);
-+ }
-+ DEBUG(MTD_DEBUG_LEVEL0, "Flash Unlock...\n");
-+ flash_req = 0;
-+}
-+#endif
-+/***********************************************************************/
-+
- static loff_t mtd_lseek (struct file *file, loff_t offset, int orig)
- {
- struct mtd_file_info *mfi = file->private_data;
-@@ -162,13 +233,21 @@ static ssize_t mtd_read(struct file *fil
- int len;
- char *kbuf;
-
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_lock(); // sl2312 share pin lock
-+#endif
-+
- DEBUG(MTD_DEBUG_LEVEL0,"MTD_read\n");
-
- if (*ppos + count > mtd->size)
- count = mtd->size - *ppos;
-
-- if (!count)
-+ if (!count){
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return 0;
-+ }
-
- /* FIXME: Use kiovec in 2.5 to lock down the user's buffers
- and pass them directly to the MTD functions */
-@@ -178,8 +257,12 @@ static ssize_t mtd_read(struct file *fil
- else
- kbuf=kmalloc(count, GFP_KERNEL);
-
-- if (!kbuf)
-+ if (!kbuf) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -ENOMEM;
-+ }
-
- while (count) {
-
-@@ -224,6 +307,9 @@ static ssize_t mtd_read(struct file *fil
- *ppos += retlen;
- if (copy_to_user(buf, kbuf, retlen)) {
- kfree(kbuf);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
- }
- else
-@@ -235,13 +321,19 @@ static ssize_t mtd_read(struct file *fil
- count = 0;
- }
- else {
-- kfree(kbuf);
-+ kfree(kbuf);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return ret;
- }
-
- }
-
- kfree(kbuf);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return total_retlen;
- } /* mtd_read */
-
-@@ -255,24 +347,40 @@ static ssize_t mtd_write(struct file *fi
- int ret=0;
- int len;
-
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_lock(); // sl2312 share pin lock
-+#endif
-+
- DEBUG(MTD_DEBUG_LEVEL0,"MTD_write\n");
-
-- if (*ppos == mtd->size)
-+ if (*ppos == mtd->size){
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -ENOSPC;
-+ }
-
- if (*ppos + count > mtd->size)
- count = mtd->size - *ppos;
-
-- if (!count)
-+ if (!count){
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return 0;
-+ }
-
- if (count > MAX_KMALLOC_SIZE)
- kbuf=kmalloc(MAX_KMALLOC_SIZE, GFP_KERNEL);
- else
- kbuf=kmalloc(count, GFP_KERNEL);
-
-- if (!kbuf)
-+ if (!kbuf) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -ENOMEM;
-+ }
-
- while (count) {
-
-@@ -283,6 +391,9 @@ static ssize_t mtd_write(struct file *fi
-
- if (copy_from_user(kbuf, buf, len)) {
- kfree(kbuf);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
- }
-
-@@ -323,11 +434,17 @@ static ssize_t mtd_write(struct file *fi
- }
- else {
- kfree(kbuf);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return ret;
- }
- }
-
- kfree(kbuf);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return total_retlen;
- } /* mtd_write */
-
-@@ -381,36 +498,67 @@ static int mtd_ioctl(struct inode *inode
- u_long size;
- struct mtd_info_user info;
-
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_lock(); // sl2312 share pin lock
-+#endif
-+
- DEBUG(MTD_DEBUG_LEVEL0, "MTD_ioctl\n");
-
- size = (cmd & IOCSIZE_MASK) >> IOCSIZE_SHIFT;
- if (cmd & IOC_IN) {
- if (!access_ok(VERIFY_READ, argp, size))
-+ {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
-+ }
- }
- if (cmd & IOC_OUT) {
- if (!access_ok(VERIFY_WRITE, argp, size))
-+ {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
-+ }
- }
-
- switch (cmd) {
- case MEMGETREGIONCOUNT:
- if (copy_to_user(argp, &(mtd->numeraseregions), sizeof(int)))
-+ {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
-+ }
- break;
-
- case MEMGETREGIONINFO:
- {
- struct region_info_user ur;
-
-- if (copy_from_user(&ur, argp, sizeof(struct region_info_user)))
-+ if (copy_from_user(&ur, argp, sizeof(struct region_info_user))) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
-+ }
-
-- if (ur.regionindex >= mtd->numeraseregions)
-+ if (ur.regionindex >= mtd->numeraseregions) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EINVAL;
-+ }
- if (copy_to_user(argp, &(mtd->eraseregions[ur.regionindex]),
-- sizeof(struct mtd_erase_region_info)))
-+ sizeof(struct mtd_erase_region_info))) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
-+ }
- break;
- }
-
-@@ -433,7 +581,12 @@ static int mtd_ioctl(struct inode *inode
- struct erase_info *erase;
-
- if(!(file->f_mode & 2))
-+ {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EPERM;
-+ }
-
- erase=kzalloc(sizeof(struct erase_info),GFP_KERNEL);
- if (!erase)
-@@ -447,6 +600,9 @@ static int mtd_ioctl(struct inode *inode
- if (copy_from_user(&erase->addr, argp,
- sizeof(struct erase_info_user))) {
- kfree(erase);
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
- }
- erase->mtd = mtd;
-@@ -484,14 +640,26 @@ static int mtd_ioctl(struct inode *inode
- struct mtd_oob_buf buf;
- struct mtd_oob_ops ops;
-
-- if(!(file->f_mode & 2))
-+ if(!(file->f_mode & 2)) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EPERM;
-+ }
-
-- if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf)))
-+ if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf))) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
-+ }
-
-- if (buf.length > 4096)
-+ if (buf.length > 4096) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EINVAL;
-+ }
-
- if (!mtd->write_oob)
- ret = -EOPNOTSUPP;
-@@ -499,8 +667,12 @@ static int mtd_ioctl(struct inode *inode
- ret = access_ok(VERIFY_READ, buf.ptr,
- buf.length) ? 0 : EFAULT;
-
-- if (ret)
-+ if (ret) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return ret;
-+ }
-
- ops.ooblen = buf.length;
- ops.ooboffs = buf.start & (mtd->oobsize - 1);
-@@ -536,19 +708,35 @@ static int mtd_ioctl(struct inode *inode
- struct mtd_oob_buf buf;
- struct mtd_oob_ops ops;
-
-- if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf)))
-+ if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf))) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
-+ }
-
-- if (buf.length > 4096)
-+ if (buf.length > 4096) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EINVAL;
-+ }
-
-- if (!mtd->read_oob)
-+ if (!mtd->read_oob) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- ret = -EOPNOTSUPP;
-+ }
- else
- ret = access_ok(VERIFY_WRITE, buf.ptr,
- buf.length) ? 0 : -EFAULT;
-- if (ret)
-+ if (ret) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return ret;
-+ }
-
- ops.ooblen = buf.length;
- ops.ooboffs = buf.start & (mtd->oobsize - 1);
-@@ -580,7 +768,12 @@ static int mtd_ioctl(struct inode *inode
- struct erase_info_user info;
-
- if (copy_from_user(&info, argp, sizeof(info)))
-+ {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
-+ }
-
- if (!mtd->lock)
- ret = -EOPNOTSUPP;
-@@ -594,7 +787,12 @@ static int mtd_ioctl(struct inode *inode
- struct erase_info_user info;
-
- if (copy_from_user(&info, argp, sizeof(info)))
-+ {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
-+ }
-
- if (!mtd->unlock)
- ret = -EOPNOTSUPP;
-@@ -629,11 +827,21 @@ static int mtd_ioctl(struct inode *inode
- loff_t offs;
-
- if (copy_from_user(&offs, argp, sizeof(loff_t)))
-+ {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
-+ }
- if (!mtd->block_isbad)
- ret = -EOPNOTSUPP;
- else
-+ {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return mtd->block_isbad(mtd, offs);
-+ }
- break;
- }
-
-@@ -642,11 +850,21 @@ static int mtd_ioctl(struct inode *inode
- loff_t offs;
-
- if (copy_from_user(&offs, argp, sizeof(loff_t)))
-+ {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
-+ }
- if (!mtd->block_markbad)
- ret = -EOPNOTSUPP;
- else
-+ {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return mtd->block_markbad(mtd, offs);
-+ }
- break;
- }
-
-@@ -654,8 +872,12 @@ static int mtd_ioctl(struct inode *inode
- case OTPSELECT:
- {
- int mode;
-- if (copy_from_user(&mode, argp, sizeof(int)))
-+ if (copy_from_user(&mode, argp, sizeof(int))) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
-+ }
-
- mfi->mode = MTD_MODE_NORMAL;
-
-@@ -670,7 +892,12 @@ static int mtd_ioctl(struct inode *inode
- {
- struct otp_info *buf = kmalloc(4096, GFP_KERNEL);
- if (!buf)
-+ {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -ENOMEM;
-+ }
- ret = -EOPNOTSUPP;
- switch (mfi->mode) {
- case MTD_MODE_OTP_FACTORY:
-@@ -701,12 +928,24 @@ static int mtd_ioctl(struct inode *inode
- {
- struct otp_info info;
-
-- if (mfi->mode != MTD_MODE_OTP_USER)
-+ if (mfi->mode != MTD_MODE_OTP_USER) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EINVAL;
-- if (copy_from_user(&info, argp, sizeof(info)))
-+ }
-+ if (copy_from_user(&info, argp, sizeof(info))) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EFAULT;
-- if (!mtd->lock_user_prot_reg)
-+ }
-+ if (!mtd->lock_user_prot_reg) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EOPNOTSUPP;
-+ }
- ret = mtd->lock_user_prot_reg(mtd, info.start, info.length);
- break;
- }
-@@ -742,8 +981,12 @@ static int mtd_ioctl(struct inode *inode
- break;
-
- case MTD_MODE_RAW:
-- if (!mtd->read_oob || !mtd->write_oob)
-+ if (!mtd->read_oob || !mtd->write_oob) {
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
- return -EOPNOTSUPP;
-+ }
- mfi->mode = arg;
-
- case MTD_MODE_NORMAL:
-@@ -766,6 +1009,10 @@ static int mtd_ioctl(struct inode *inode
- ret = -ENOTTY;
- }
-
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+ mtd_unlock(); // sl2312 share pin lock
-+#endif
-+
- return ret;
- } /* memory_ioctl */
-
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -44,6 +44,13 @@ config MTD_NAND_AUTCPU12
- This enables the driver for the autronix autcpu12 board to
- access the SmartMediaCard.
-
-+config MTD_NAND_SL2312
-+ tristate "NAND Flash device on Storlink board"
-+ depends on ARM && MTD_NAND && ARCH_SL2312
-+ help
-+ This enables the driver for the Storlink board to
-+ access the nand device.
-+
- config MTD_NAND_EDB7312
- tristate "Support for Cirrus Logic EBD7312 evaluation board"
- depends on ARCH_EDB7312
---- /dev/null
-+++ b/drivers/mtd/nand/sl2312-flash-nand.c
-@@ -0,0 +1,2287 @@
-+/*
-+ * drivers/mtd/sl2312.c
-+ *
-+ * $Id: sl2312-flash-nand.c,v 1.5 2006/06/15 07:02:29 middle Exp $
-+ *
-+ * Copyright (C) 2001 Toshiba Corporation
-+ *
-+ * 2003 (c) MontaVista Software, Inc. This file is licensed under
-+ * the terms of the GNU General Public License version 2. This program
-+ * is licensed "as is" without any warranty of any kind, whether express
-+ * or implied.
-+ *
-+ */
-+
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/nand.h>
-+#include <linux/mtd/nand_ecc.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/delay.h>
-+#include <asm/io.h>
-+#include <asm/hardware.h>
-+#include <asm/arch/sl2312.h>
-+#include "sl2312-flash-nand.h"
-+
-+
-+#include <linux/errno.h>
-+#include <linux/sched.h>
-+#include <linux/types.h>
-+#include <linux/mtd/compatmac.h>
-+#include <linux/interrupt.h>
-+#include <linux/bitops.h>
-+
-+
-+/*
-+ * NAND low-level MTD interface functions
-+ */
-+static void sl2312_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len);
-+static void sl2312_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len);
-+static int sl2312_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len);
-+
-+static int sl2312_nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);
-+static int sl2312_nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);
-+static int sl2312_nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);
-+static int sl2312_nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf);
-+static int sl2312_nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
-+ size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);
-+static int sl2312_nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char *buf);
-+static int sl2312_nand_writev (struct mtd_info *mtd, const struct kvec *vecs,
-+ unsigned long count, loff_t to, size_t * retlen);
-+static int sl2312_nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs,
-+ unsigned long count, loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
-+static int sl2312_nand_erase (struct mtd_info *mtd, struct erase_info *instr, int allowbbt);
-+static void sl2312_nand_sync (struct mtd_info *mtd);
-+static int sl2312_nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf, struct nand_oobinfo *oobsel);
-+static int sl2312_nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt);
-+static int sl2312_nand_erase_block(struct mtd_info *mtd, int page);
-+
-+/*
-+ * MTD structure for sl2312 NDFMC
-+ */
-+static struct mtd_info *sl2312_mtd = NULL;
-+static int nand_page=0,nand_col=0;
-+
-+/* Define default oob placement schemes for large and small page devices */
-+static struct nand_oobinfo nand_oob_8 = {
-+ .useecc = MTD_NANDECC_AUTOPLACE,
-+ .eccbytes = 3,
-+ .eccpos = {0, 1, 2},
-+ .oobfree = { {3, 2}, {6, 2} }
-+};
-+
-+static struct nand_oobinfo nand_oob_16 = {
-+ .useecc = MTD_NANDECC_AUTOPLACE,
-+ .eccbytes = 6,
-+ .eccpos = {0, 1, 2, 3, 6, 7},
-+ .oobfree = { {8, 8} }
-+};
-+
-+static struct nand_oobinfo nand_oob_64 = {
-+ .useecc = MTD_NANDECC_AUTOPLACE,
-+ .eccbytes = 24,
-+ .eccpos = {
-+ 40, 41, 42, 43, 44, 45, 46, 47,
-+ 48, 49, 50, 51, 52, 53, 54, 55,
-+ 56, 57, 58, 59, 60, 61, 62, 63},
-+ .oobfree = { {2, 38} }
-+};
-+
-+
-+/*
-+ * Define partitions for flash device
-+ */
-+/* the base address of FLASH control register */
-+#define FLASH_CONTROL_BASE_ADDR (IO_ADDRESS(SL2312_FLASH_CTRL_BASE))
-+#define SL2312_GLOBAL_BASE_ADDR (IO_ADDRESS(SL2312_GLOBAL_BASE))
-+//#define SL2312_FLASH_BASE_ADDR (IO_ADDRESS(SL2312_FLASH_BASE))
-+#define SL2312_FLASH_BASE_ADDR FLASH_VADDR(SL2312_FLASH_BASE)
-+static unsigned int CHIP_EN;
-+/* define read/write register utility */
-+//#define FLASH_READ_REG(offset) (__raw_readl(offset+FLASH_CONTROL_BASE_ADDR))
-+//#define FLASH_WRITE_REG(offset,val) (__raw_writel(val,offset+FLASH_CONTROL_BASE_ADDR))
-+//#define FLASH_READ_DATA(offset) (__raw_readb(offset+SL2312_FLASH_BASE_ADDR))
-+//#define FLASH_WRITE_DATA(offset,val) (__raw_writeb(val,offset+SL2312_FLASH_BASE_ADDR))
-+
-+unsigned int FLASH_READ_REG(unsigned int addr)
-+{
-+ unsigned int *base;
-+ unsigned int data;
-+
-+ base = (unsigned int *)(FLASH_CONTROL_BASE_ADDR + addr);
-+ data = *base;
-+ return (data);
-+}
-+
-+void FLASH_WRITE_REG(unsigned int addr,unsigned int data)
-+{
-+ unsigned int *base;
-+
-+ base = (unsigned int *)(FLASH_CONTROL_BASE_ADDR + addr);
-+ *base = data;
-+ return;
-+}
-+
-+unsigned int FLASH_READ_DATA(unsigned int addr)
-+{
-+ unsigned char *base;
-+ unsigned int data;
-+
-+ base = (unsigned char *)(SL2312_FLASH_BASE_ADDR + addr);
-+ data = *base;
-+ return (data);
-+}
-+
-+void FLASH_WRITE_DATA(unsigned int addr,unsigned int data)
-+{
-+ unsigned char *base;
-+
-+ base = (unsigned char *)(SL2312_FLASH_BASE_ADDR + addr);
-+ *base = data;
-+ return;
-+}
-+
-+/* the offset of FLASH control register */
-+enum NFLASH_REGISTER {
-+ NFLASH_ID = 0x0000,
-+ NFLASH_STATUS = 0x0008,
-+ NFLASH_TYPE = 0x000c,
-+ NFLASH_ACCESS = 0x0030,
-+ NFLASH_COUNT = 0x0034,
-+ NFLASH_CMD_ADDR = 0x0038,
-+ NFLASH_ADDRESS = 0x003C,
-+ NFLASH_DATA = 0x0040,
-+ NFLASH_TIMING = 0x004C,
-+ NFLASH_ECC_STATUS = 0x0050,
-+ NFLASH_ECC_CONTROL = 0x0054,
-+ NFLASH_ECC_OOB = 0x005c,
-+ NFLASH_ECC_CODE_GEN0 = 0x0060,
-+ NFLASH_ECC_CODE_GEN1 = 0x0064,
-+ NFLASH_ECC_CODE_GEN2 = 0x0068,
-+ NFLASH_ECC_CODE_GEN3 = 0x006C,
-+ NFLASH_FIFO_CONTROL = 0x0070,
-+ NFLASH_FIFO_STATUS = 0x0074,
-+ NFLASH_FIFO_ADDRESS = 0x0078,
-+ NFLASH_FIFO_DATA = 0x007c,
-+};
-+
-+
-+
-+//#define FLASH_BASE FLASH_CONTROL_BASE_ADDR
-+//#define FLASH_SIZE 0x00800000 //INTEGRATOR_FLASH_SIZE
-+
-+//#define FLASH_PART_SIZE 8388608
-+
-+//static unsigned int flash_indirect_access = 0;
-+
-+
-+#ifdef CONFIG_SL2312_SHARE_PIN
-+void sl2312flash_enable_nand_flash(void)
-+{
-+ unsigned int reg_val;
-+
-+ reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
-+ reg_val = reg_val & 0xfffffffb;
-+ writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
-+ return;
-+}
-+
-+void sl2312flash_disable_nand_flash(void)
-+{
-+ unsigned int reg_val;
-+
-+ reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
-+ reg_val = reg_val | 0x00000004;
-+ writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
-+ return;
-+}
-+#endif
-+
-+extern struct nand_oobinfo jffs2_oobinfo;
-+/*
-+ * Define partitions for flash devices
-+ */
-+
-+static struct mtd_partition sl2312_partitions[] = {
-+ { name: "RedBoot", offset: 0x00000000, size: 0x0020000, },
-+ { name: "Kernel", offset: 0x00020000, size: 0x00200000, },
-+ { name: "Ramdisk", offset: 0x00220000, size: 0x00280000, },
-+ { name: "Application", offset: 0x004A0000, size: 0x00320000, },
-+ { name: "VCTL", offset: 0x007C0000, size: 0x20000, },
-+ { name: "CurConf", offset: 0x007E0000, size: 0x20000, },
-+ { name: "FIS directory", offset: 0x007e0000, size: 0x00020000, }
-+
-+};
-+
-+
-+/*
-+ * hardware specific access to control-lines
-+*/
-+static void sl2312_hwcontrol(struct mtd_info *mtd, int cmd)
-+{
-+
-+ return ;
-+}
-+
-+static int sl2312_nand_scan_bbt(struct mtd_info *mtd)
-+{
-+ return 0;
-+}
-+
-+/**
-+ * nand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad
-+ * @mtd: MTD device structure
-+ * @ofs: offset relative to mtd start
-+ */
-+static int sl2312_nand_block_isbad (struct mtd_info *mtd, loff_t ofs)
-+{
-+ /* Check for invalid offset */
-+ if (ofs > mtd->size)
-+ return -EINVAL;
-+
-+ return sl2312_nand_block_checkbad (mtd, ofs, 1, 0);
-+}
-+
-+/**
-+ * nand_block_checkbad - [GENERIC] Check if a block is marked bad
-+ * @mtd: MTD device structure
-+ * @ofs: offset from device start
-+ * @getchip: 0, if the chip is already selected
-+ * @allowbbt: 1, if its allowed to access the bbt area
-+ *
-+ * Check, if the block is bad. Either by reading the bad block table or
-+ * calling of the scan function.
-+ */
-+
-+static int sl2312_nand_erase_block(struct mtd_info *mtd, int page)
-+{
-+ int opcode;
-+ /* Send commands to erase a page */
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
-+
-+ if(mtd->oobblock > 528)
-+ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff21); // 3 address & 2 command
-+ else
-+ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff11); // 2 address & 2 command
-+
-+ FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x0000d060); // write read id command
-+ FLASH_WRITE_REG(NFLASH_ADDRESS, page); //write address 0x00
-+
-+
-+
-+ /* read maker code */
-+ opcode = 0x80003000|DWIDTH|CHIP_EN; //set start bit & 8bits write command
-+ FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+
-+ while(opcode&0x80000000) //polling flash access 31b
-+ {
-+ opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+ //sl2312_flash_delay();
-+ schedule();
-+ //cond_resched();
-+ }
-+}
-+
-+void sl2312_flash_delay(void)
-+{
-+ int i;
-+
-+ for(i=0; i<50; i++)
-+ i=i;
-+}
-+
-+static int sl2312_nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt)
-+{
-+ struct nand_chip *this = mtd->priv;
-+
-+ if (!this->bbt)
-+ return this->block_bad(mtd, ofs, getchip);
-+
-+ /* Return info from the table */
-+ return nand_isbad_bbt (mtd, ofs, allowbbt);
-+}
-+
-+/**
-+ * nand_block_markbad - [MTD Interface] Mark the block at the given offset as bad
-+ * @mtd: MTD device structure
-+ * @ofs: offset relative to mtd start
-+ */
-+static int sl2312_nand_block_markbad (struct mtd_info *mtd, loff_t ofs)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ int ret;
-+
-+ if ((ret = sl2312_nand_block_isbad(mtd, ofs))) {
-+ /* If it was bad already, return success and do nothing. */
-+ if (ret > 0)
-+ return 0;
-+ return ret;
-+ }
-+
-+ return this->block_markbad(mtd, ofs);
-+}
-+
-+/*
-+ * Get chip for selected access
-+ */
-+static inline void sl2312_nand_get_chip (struct nand_chip *this, struct mtd_info *mtd, int new_state, int *erase_state)
-+{
-+
-+ DECLARE_WAITQUEUE (wait, current);
-+
-+ /*
-+ * Grab the lock and see if the device is available
-+ * For erasing, we keep the spinlock until the
-+ * erase command is written.
-+ */
-+retry:
-+ spin_lock_bh (&this->chip_lock);
-+
-+ if (this->state == FL_READY) {
-+ this->state = new_state;
-+ if (new_state != FL_ERASING)
-+ spin_unlock_bh (&this->chip_lock);
-+ return;
-+ }
-+
-+ if (this->state == FL_ERASING) {
-+ if (new_state != FL_ERASING) {
-+ this->state = new_state;
-+ spin_unlock_bh (&this->chip_lock);
-+ this->select_chip(mtd, 0); /* select in any case */
-+ this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
-+ return;
-+ }
-+ }
-+
-+ set_current_state (TASK_UNINTERRUPTIBLE);
-+ add_wait_queue (&this->wq, &wait);
-+ spin_unlock_bh (&this->chip_lock);
-+ schedule ();
-+ remove_wait_queue (&this->wq, &wait);
-+ goto retry;
-+}
-+
-+/*
-+* read device ready pin
-+*/
-+static int sl2312_device_ready(struct mtd_info *mtd)
-+{
-+ int ready;
-+
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
-+ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f000070); //set only command no address and two data
-+
-+ FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x00000070); //write read status command
-+
-+
-+ ready = 0x80002000|DWIDTH|CHIP_EN; //set start bit & 8bits read command
-+ FLASH_WRITE_REG(NFLASH_ACCESS, ready);
-+
-+ while(ready&0x80000000) //polling flash access 31b
-+ {
-+ ready=FLASH_READ_REG(NFLASH_ACCESS);
-+ //sl2312_flash_delay();
-+ schedule();
-+ }
-+ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+ ready=FLASH_READ_REG(NFLASH_DATA)&0xff;
-+ return ready;
-+}
-+void sl2312_enable_hwecc(struct mtd_info *mtd, int mode)
-+{
-+ /* reset first */
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x80000001); //set 31b = 0
-+
-+}
-+
-+
-+void sl2312_device_setup(void)
-+{
-+
-+}
-+static u_char sl2312_nand_read_byte(struct mtd_info *mtd)
-+{
-+
-+ unsigned int data=0, page=0, col=0, tmp, i;
-+
-+ printk ("**************************sl2312_nand_read_byte !! \n");
-+ //page = FLASH_READ_REG(NFLASH_ADDRESS)&0xffffff00;
-+ //col = FLASH_READ_REG(NFLASH_ADDRESS)&0x000000ff;
-+ page = nand_page;
-+ col = nand_col;
-+ for(i=0;i<(mtd->oobblock+mtd->oobsize);i++)
-+ {
-+ if(i==col)
-+ data = FLASH_READ_DATA(page*mtd->oobblock +i);
-+ else
-+ tmp = FLASH_READ_DATA(page*mtd->oobblock +i);
-+ }
-+ return data&0xff;
-+}
-+
-+static void sl2312_nand_write_byte(struct mtd_info *mtd, u_char byte)
-+{
-+ //struct nand_chip *this = mtd->priv;
-+ unsigned int page=0, col=0, i;
-+ u_char *databuf,oobbuf[mtd->oobsize];
-+ size_t retlen;
-+ retlen=0;
-+ printk ("********************sl2312_nand_write_byte !! \n");
-+ page = nand_page;
-+ col = nand_col;
-+ databuf = kmalloc (mtd->oobsize+mtd->oobblock,GFP_KERNEL);
-+
-+ if (!databuf) {
-+ printk ("sl2312_nand_write_byte : Unable to allocate SL2312 NAND MTD device structure.\n");
-+
-+ }
-+
-+ for(i=0;i<(mtd->oobblock+mtd->oobsize);i++)
-+ databuf[i] = FLASH_READ_DATA(page*mtd->oobblock +i);
-+
-+ databuf[col] = byte;
-+ sl2312_nand_write_ecc (mtd, page, mtd->oobblock, &retlen, databuf, oobbuf, NULL);
-+
-+}
-+
-+static void sl2312_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
-+{
-+ int i, page=0,col=0;
-+ struct nand_chip *this = mtd->priv;
-+ u_char *databuf, *oobbuf;
-+ size_t retlen;
-+ retlen=0;
-+
-+
-+ printk ("***********************sl2312_nand_write_buf !! \n");
-+ databuf = &(this->data_buf[0]);
-+ oobbuf = &(this->data_buf[mtd->oobblock]);
-+ for (i = 0; i < mtd->oobsize; i++)
-+ oobbuf[i] = 0xff;
-+
-+ if(len < mtd->oobblock)
-+ {
-+ //addr = FLASH_READ_REG(NFLASH_ADDRESS);
-+ //page = FLASH_READ_REG(NFLASH_ADDRESS)&0xffffff00;
-+ //col = FLASH_READ_REG(NFLASH_ADDRESS)&0x000000ff;
-+ page = nand_page;
-+ col = nand_col;
-+
-+ sl2312_nand_read_ecc (mtd, page, mtd->oobblock , &retlen, databuf, oobbuf, NULL);
-+
-+ for(i=col;i<len;i++)
-+ databuf[col+i] = buf[i];
-+
-+ sl2312_nand_write_ecc (mtd, page, mtd->oobblock, &retlen, databuf, oobbuf, NULL);
-+
-+ }
-+
-+}
-+
-+static void sl2312_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
-+{
-+ int i, page=0,col=0,addr=0,tmp=0;
-+ //struct nand_chip *this = mtd->priv;
-+ printk ("********************sl2312_nand_read_buf !! \n");
-+ if(len < mtd->oobblock)
-+ {
-+ //addr = FLASH_READ_REG(NFLASH_ADDRESS);
-+ //page = FLASH_READ_REG(NFLASH_ADDRESS)&0xffffff00;
-+ //col = FLASH_READ_REG(NFLASH_ADDRESS)&0x000000ff;
-+ page = nand_page;
-+ col = nand_col;
-+ for (i=col; i<((mtd->oobblock+mtd->oobsize)-col); i++)
-+ {
-+ if(i<len)
-+ buf[i] = FLASH_READ_DATA(addr+i);
-+ else
-+ tmp = FLASH_READ_DATA(addr+i);
-+ }
-+ }
-+}
-+
-+static int sl2312_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
-+{
-+ int i;
-+ //struct nand_chip *this = mtd->priv;
-+ u_char *datatmp, *oobtmp;
-+ size_t retlen;
-+ retlen=0;
-+
-+ datatmp = kmalloc (mtd->oobblock,GFP_KERNEL);
-+ oobtmp = kmalloc (mtd->oobsize,GFP_KERNEL);
-+
-+ if ((!datatmp)||(!oobtmp)) {
-+ printk ("sl2312_nand_verify_buf : Unable to allocate SL2312 NAND MTD device structure.\n");
-+
-+ }
-+ //page = nand_page;
-+ for(i=0;i<mtd->oobblock;i++)
-+ datatmp[i] = FLASH_READ_DATA(nand_page*mtd->oobblock +i);
-+ /* read oobdata */
-+ for (i = 0; i < mtd->oobsize; i++)
-+ oobtmp[i] = FLASH_READ_DATA(nand_page*mtd->oobblock + mtd->oobblock + i);
-+
-+ if(len==mtd->oobblock)
-+ {
-+ for (i=0; i<len; i++)
-+ {
-+ if (buf[i] != datatmp[i])
-+ {
-+ kfree(datatmp);
-+ kfree(oobtmp);
-+ printk("Data verify error -> page: %x, byte: %x \n",nand_page,i);
-+ return i;
-+ }
-+ }
-+ }
-+ else if(len == mtd->oobsize)
-+ {
-+ for (i=0; i<len; i++)
-+ {
-+ if (buf[i] != oobtmp[i])
-+ {
-+ kfree(datatmp);
-+ kfree(oobtmp);
-+ printk("OOB verify error -> page: %x, byte: %x \n",nand_page,i);
-+ return i;
-+ }
-+ }
-+ }
-+ else
-+ {
-+ printk (KERN_WARNING "sl2312_nand_verify_buf : verify length not match 0x%08x\n", len);
-+ kfree(datatmp);
-+ kfree(oobtmp);
-+ return -1;
-+ }
-+
-+ kfree(datatmp);
-+ kfree(oobtmp);
-+ return 0;
-+}
-+
-+/*
-+ * Send command to NAND device
-+ */
-+static void sl2312_nand_command (struct mtd_info *mtd, unsigned command, int column, int page_addr)
-+{
-+ register struct nand_chip *this = mtd->priv;
-+ int opcode;
-+
-+
-+ /*
-+ * program and erase have their own busy handlers
-+ * status and sequential in needs no delay
-+ */
-+ switch (command) {
-+
-+ case NAND_CMD_PAGEPROG:
-+ case NAND_CMD_ERASE1:
-+ case NAND_CMD_ERASE2:
-+ case NAND_CMD_SEQIN:
-+ case NAND_CMD_STATUS:
-+ case NAND_CMD_READ0:
-+
-+ /*
-+ * Write out the command to the device.
-+ */
-+ if (column != -1 || page_addr != -1) {
-+
-+ /* Serially input address */
-+ if (column != -1)
-+ //FLASH_WRITE_REG(NFLASH_ADDRESS,column);
-+ nand_col=column;
-+
-+ opcode = FLASH_READ_REG(NFLASH_ADDRESS);
-+
-+ if (page_addr != -1)
-+ //FLASH_WRITE_REG(NFLASH_ADDRESS,opcode|(page_addr<<8));
-+ nand_page = page_addr;
-+
-+ }
-+ return;
-+
-+ case NAND_CMD_RESET:
-+ if (this->dev_ready)
-+ break;
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
-+ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff70); //set only command and no other data
-+ FLASH_WRITE_REG(NFLASH_CMD_ADDR, NAND_CMD_RESET); //write reset command
-+
-+ opcode = 0x80002000|DWIDTH|CHIP_EN; //set start bit & 8bits read command
-+ FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+
-+ while(opcode&0x80000000) //polling flash access 31b
-+ {
-+ opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+ //sl2312_flash_delay();
-+ schedule();
-+ }
-+ while ( !(sl2312_device_ready(mtd) & 0x40));
-+ {
-+ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+ //sl2312_flash_delay();
-+ schedule();
-+ return;
-+ }
-+ /* This applies to read commands */
-+ default:
-+ /*
-+ * If we don't have access to the busy pin, we apply the given
-+ * command delay
-+ */
-+ if (!this->dev_ready) {
-+ udelay (this->chip_delay);
-+ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+ return;
-+ }
-+ }
-+
-+ /* wait until command is processed */
-+ while (!this->dev_ready(mtd));
-+
-+}
-+/*Add function*/
-+static void nand_read_id(int chip_no, unsigned char *id)
-+{
-+ unsigned int opcode, i;
-+
-+ if(chip_no==0)
-+ CHIP_EN = NFLASH_CHIP0_EN;
-+ else
-+ CHIP_EN = NFLASH_CHIP1_EN;
-+
-+ opcode = FLASH_READ_REG(NFLASH_TYPE);
-+
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
-+ if((opcode&0x00000300)<=0x00000100)
-+ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f000100); //set only command & address and two data
-+ else
-+ FLASH_WRITE_REG(NFLASH_COUNT, 0x7f000300); //set only command & address and 4 data
-+
-+ FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x00000090); //write read id command
-+ FLASH_WRITE_REG(NFLASH_ADDRESS, 0x00000000); //write address 0x00
-+
-+ /* read maker code */
-+ opcode = 0x80002000|DWIDTH|CHIP_EN;//|chip0_en; //set start bit & 8bits read command
-+ FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+ opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+ while(opcode&0x80000000) //polling flash access 31b
-+ {
-+ opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+ //sl2312_flash_delay();
-+ schedule();
-+ }
-+
-+ opcode = FLASH_READ_REG(NFLASH_DATA);
-+ if(DWIDTH==NFLASH_WiDTH16)
-+ {
-+ id[0] = opcode&0xff;
-+ id[1] = (opcode&0xff00)>>8;
-+ }
-+ else
-+ {
-+ id[0] = opcode&0xff;
-+ opcode = 0x80002000|DWIDTH|CHIP_EN;//|chip0_en; //set start bit & 8bits read command
-+ FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+ opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+ while(opcode&0x80000000) //polling flash access 31b
-+ {
-+ opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+ //sl2312_flash_delay();
-+ schedule();
-+ }
-+ opcode = FLASH_READ_REG(NFLASH_DATA);
-+ id[1] = (opcode&0xff00)>>8;
-+
-+ opcode=FLASH_READ_REG(NFLASH_TYPE);
-+ if((opcode&0x300)>0x100)
-+ {
-+ for(i=0;i<2;i++)
-+ {
-+ //data cycle 3 & 4 ->not use
-+ opcode = 0x80002000|DWIDTH|CHIP_EN;//set start bit & 8bits read command
-+ FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+ opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+ while(opcode&0x80000000) //polling flash access 31b
-+ {
-+ opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+ //sl2312_flash_delay();
-+ schedule();
-+ }
-+
-+ opcode=FLASH_READ_REG(NFLASH_DATA);
-+ id[2+i] = (opcode&(0xff0000<<i*8))>>(8*(2+i));
-+ }
-+ }
-+ }
-+ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+}
-+
-+/*
-+ * NAND erase a block
-+ */
-+static int sl2312_nand_erase (struct mtd_info *mtd, struct erase_info *instr, int allowbbt)
-+{
-+ int page, len, status, pages_per_block, ret, chipnr;
-+ struct nand_chip *this = mtd->priv;
-+
-+ DEBUG (MTD_DEBUG_LEVEL3,
-+ "nand_erase: start = 0x%08x, len = %i\n", (unsigned int) instr->addr, (unsigned int) instr->len);
-+
-+ /* Start address must align on block boundary */
-+ if (instr->addr & ((1 << this->phys_erase_shift) - 1)) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n");
-+ return -EINVAL;
-+ }
-+
-+ /* Length must align on block boundary */
-+ if (instr->len & ((1 << this->phys_erase_shift) - 1)) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Length not block aligned\n");
-+ return -EINVAL;
-+ }
-+
-+ /* Do not allow erase past end of device */
-+ if ((instr->len + instr->addr) > mtd->size) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Erase past end of device\n");
-+ return -EINVAL;
-+ }
-+
-+ instr->fail_addr = 0xffffffff;
-+
-+ /* Grab the lock and see if the device is available */
-+ sl2312_nand_get_chip (this, mtd, FL_ERASING, NULL);
-+
-+ /* Shift to get first page */
-+ page = (int) (instr->addr >> this->page_shift);
-+ chipnr = (int) (instr->addr >> this->chip_shift);
-+
-+ /* Calculate pages in each block */
-+ pages_per_block = 1 << (this->phys_erase_shift - this->page_shift);
-+
-+ /* Select the NAND device */
-+ //this->select_chip(mtd, chipnr);
-+ this->select_chip(mtd, 0);
-+
-+ /* Check the WP bit */
-+ /* Check, if it is write protected */
-+ status = sl2312_device_ready(mtd);
-+ if (!(status & 0x80)) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Device is write protected!!!\n");
-+ instr->state = MTD_ERASE_FAILED;
-+ goto erase_exit;
-+ }
-+
-+ /* Loop through the pages */
-+ len = instr->len;
-+
-+ instr->state = MTD_ERASING;
-+
-+ while (len) {
-+ /* Check if we have a bad block, we do not erase bad blocks ! */
-+ if (this->block_bad(mtd, ((loff_t) page) << this->page_shift, 0)) {
-+ printk (KERN_WARNING "nand_erase: attempt to erase a bad block at page 0x%08x\n", page);
-+ //instr->state = MTD_ERASE_FAILED;
-+ //goto erase_exit;
-+ }
-+
-+ /* Invalidate the page cache, if we erase the block which contains
-+ the current cached page */
-+ if (page <= this->pagebuf && this->pagebuf < (page + pages_per_block))
-+ this->pagebuf = -1;
-+ /////////
-+
-+ ///* Send commands to erase a page */
-+ //FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
-+ //
-+ //if(mtd->oobblock > 528)
-+ // FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff21); // 3 address & 2 command
-+ //else
-+ // FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff11); // 2 address & 2 command
-+ //
-+ //FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x0000d060); // write read id command
-+ //FLASH_WRITE_REG(NFLASH_ADDRESS, page); //write address 0x00
-+ //
-+ //
-+ //
-+ ///* read maker code */
-+ //opcode = 0x80003000|DWIDTH|CHIP_EN; //set start bit & 8bits write command
-+ //FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+ //
-+ //while(opcode&0x80000000) //polling flash access 31b
-+ //{
-+ // opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+ // //sl2312_flash_delay();
-+ // schedule();
-+ // //cond_resched();
-+ //}
-+ sl2312_nand_erase_block(mtd, page);
-+ //////////////
-+ status = this->waitfunc (mtd, this, FL_ERASING);
-+ /* See if block erase succeeded */
-+ if (status & 0x01) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: " "Failed erase, page 0x%08x\n", page);
-+ instr->state = MTD_ERASE_FAILED;
-+ instr->fail_addr = (page << this->page_shift);
-+ goto erase_exit;
-+ }
-+
-+ /* Increment page address and decrement length */
-+ len -= (1 << this->phys_erase_shift);
-+ page += pages_per_block;
-+
-+ /* Check, if we cross a chip boundary */
-+ if (len && !(page & this->pagemask)) {
-+ chipnr++;
-+ this->select_chip(mtd, 0);
-+ this->select_chip(mtd, 0);
-+ }
-+ //sl2312_flash_delay();
-+ schedule();
-+ //cond_resched();
-+ }
-+ instr->state = MTD_ERASE_DONE;
-+
-+erase_exit:
-+ /* De-select the NAND device */
-+ this->select_chip(mtd, 0);
-+ spin_unlock_bh (&this->chip_lock);
-+
-+ ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;;
-+ /* Do call back function */
-+ if (!ret && instr->callback)
-+ instr->callback (instr);
-+
-+ /* The device is ready */
-+ spin_lock_bh (&this->chip_lock);
-+ this->state = FL_READY;
-+ spin_unlock_bh (&this->chip_lock);
-+ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+ /* Return more or less happy */
-+ return ret;
-+}
-+
-+static void sl2312_nand_select_chip(struct mtd_info *mtd, int chip)
-+{
-+ //struct nand_chip *this = mtd->priv;
-+
-+ switch(chip) {
-+ case -1:
-+ CHIP_EN = NFLASH_CHIP0_EN;
-+ break;
-+ case 0:
-+ CHIP_EN = NFLASH_CHIP0_EN;
-+ break;
-+ case 1:
-+ CHIP_EN = NFLASH_CHIP1_EN;
-+ break;
-+ default:
-+ CHIP_EN = NFLASH_CHIP0_EN;
-+ break;
-+ }
-+}
-+
-+/**
-+ * nand_default_block_markbad - [DEFAULT] mark a block bad
-+ * @mtd: MTD device structure
-+ * @ofs: offset from device start
-+ *
-+ * This is the default implementation, which can be overridden by
-+ * a hardware specific driver.
-+*/
-+static int sl2312_nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ u_char buf[2] = {0, 0};
-+ size_t retlen;
-+ int block;
-+
-+ /* Get block number */
-+ block = ((int) ofs) >> this->bbt_erase_shift;
-+ this->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
-+
-+ /* Do we have a flash based bad block table ? */
-+ if (this->options & NAND_USE_FLASH_BBT)
-+ return nand_update_bbt (mtd, ofs);
-+
-+ /* We write two bytes, so we dont have to mess with 16 bit access */
-+ ofs += mtd->oobsize + (this->badblockpos & ~0x01);
-+ return sl2312_nand_write_oob (mtd, ofs , 2, &retlen, buf);
-+}
-+
-+/* Appropriate chip should already be selected */
-+static int sl2312_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)//(struct mtd_info *mtd, unsigned long page, )
-+{
-+ u_char *buf, *oobbuf;
-+ size_t retlen;
-+ unsigned long page, chipnr;
-+ struct nand_chip *this = mtd->priv;
-+
-+ if (getchip) {
-+ page = (int)(ofs >> this->page_shift);
-+ chipnr = (int)(ofs >> this->chip_shift);
-+
-+ /* Grab the lock and see if the device is available */
-+ sl2312_nand_get_chip (this, mtd, FL_READING, NULL);
-+ /* Select the NAND device */
-+ this->select_chip(mtd, chipnr);
-+ } else
-+ page = (int) ofs;
-+
-+ buf = kmalloc (mtd->oobblock,GFP_KERNEL);
-+ oobbuf = kmalloc (mtd->oobsize,GFP_KERNEL);
-+
-+ if ((!buf)||(!oobbuf)) {
-+ printk ("sl2312_nand_block_bad : Unable to allocate SL2312 NAND MTD device structure.\n");
-+
-+ }
-+
-+ sl2312_nand_read_ecc (mtd, page, mtd->oobblock , &retlen, buf, oobbuf, NULL);
-+
-+
-+ if(((mtd->oobblock < 528)&&(oobbuf[5] != 0xff))||((mtd->oobblock > 528)&&(oobbuf[0] != 0xff)))
-+ {
-+ kfree(buf);
-+ kfree(oobbuf);
-+ return 1;
-+ }
-+
-+ kfree(buf);
-+ kfree(oobbuf);
-+ return 0;
-+}
-+
-+/*
-+* Use NAND read ECC
-+*/
-+static int sl2312_nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
-+{
-+ return sl2312_nand_read_ecc (mtd, from, len, retlen, buf, NULL, NULL);
-+}
-+
-+/*
-+ * NAND read with ECC
-+ */
-+static int sl2312_nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
-+ size_t * retlen, u_char * buf, u_char * oob_buf, struct nand_oobinfo *oobsel)
-+{
-+ int j, col, page, opcode, i;
-+ int end=0;//, ecc=0;//, end_page=0;
-+ int erase_state = 0;
-+ int read = 0, oob = 0, ecc_failed = 0;//, ecc_status = 0
-+ struct nand_chip *this = mtd->priv;
-+ u_char *data_poi, *oob_data = oob_buf;
-+ //u_char ecc_calc[6];
-+ //u_char ecc_code[6];
-+ int eccmode;
-+ int *oob_config;
-+
-+
-+
-+ // use chip default if zero
-+ if (oobsel == NULL)
-+ oobsel = &mtd->oobinfo;
-+
-+ eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
-+ oob_config = oobsel->eccpos;
-+
-+ DEBUG (MTD_DEBUG_LEVEL3, "nand_read_ecc: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
-+
-+ /* Do not allow reads past end of device */
-+ if ((from + len) > mtd->size) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: Attempt read beyond end of device\n");
-+ *retlen = 0;
-+ return -EINVAL;
-+ }
-+
-+ /* Grab the lock and see if the device is available */
-+ sl2312_nand_get_chip (this, mtd ,FL_READING, &erase_state);
-+
-+ /* Select the NAND device */
-+ this->select_chip(mtd, 0);
-+
-+ /* First we calculate the starting page */
-+ page = from >> this->page_shift;
-+
-+ //end_page = mtd->oobblock + mtd->oobsize;
-+ end = mtd->oobblock;
-+ //ecc = mtd->eccsize;
-+ /* Get raw starting column */
-+ col = (from & (mtd->oobblock - 1));
-+
-+
-+ /* Send the read command */
-+ //this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page);
-+
-+ /* Loop until all data read */
-+ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+ while (read < len) {
-+
-+ //udelay(1200);
-+ /* If we have consequent page reads, apply delay or wait for ready/busy pin */
-+ if (read) {
-+ if (!this->dev_ready)
-+ udelay (this->chip_delay);
-+ else
-+ while (!this->dev_ready(mtd));
-+ }
-+
-+ /*
-+ * If the read is not page aligned, we have to read into data buffer
-+ * due to ecc, else we read into return buffer direct
-+ */
-+ if (!col && (len - read) >= end)
-+ data_poi = &buf[read];
-+ else
-+ data_poi = this->data_buf;
-+
-+ /* get oob area, if we have no oob buffer from fs-driver */
-+ if (!oob_buf) {
-+ oob_data = &this->data_buf[end];
-+ oob = 0;
-+ }
-+
-+ j = 0;
-+ switch (eccmode) {
-+ case NAND_ECC_NONE: { /* No ECC, Read in a page */
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
-+ break;
-+ }
-+
-+ case NAND_ECC_SOFT: /* Software ECC 3/256: Read in a page + oob data */
-+ break;
-+
-+ case NAND_ECC_HW3_256: /* Hardware ECC 3 byte /256 byte data: Read in first 256 byte, get ecc, */
-+ break;
-+
-+ case NAND_ECC_HW3_512:
-+ case NAND_ECC_HW6_512: /* Hardware ECC 3/6 byte / 512 byte data : Read in a page */
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x80000001); //set 31b = 0
-+ break;
-+
-+ default:
-+ printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0);
-+ //BUG();
-+ }//end switch
-+
-+ for(i=0;i<end;i++)
-+ {
-+ //udelay(7);
-+ data_poi[i] = FLASH_READ_DATA(page*mtd->oobblock +i);
-+ }
-+ /* read oobdata */
-+ for (i = 0; i < mtd->oobsize; i++)
-+ {
-+ //udelay(7);
-+ oob_data[oob + i] = FLASH_READ_DATA(page*mtd->oobblock +end+i);
-+ }
-+
-+ /* Skip ECC, if not active */
-+ if (eccmode == NAND_ECC_NONE)
-+ goto readdata;
-+
-+ // compare ecc and correct data
-+
-+ opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
-+ while(!(opcode&0x80000000)) //polling flash access 31b
-+ {
-+ opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
-+ //sl2312_flash_delay();
-+ schedule();
-+ }
-+ for(j=0;j<(end/512);j++)
-+ {//for 2k page
-+
-+ opcode = 0x00000000|oob_data[mtd->oobsize-3-4*j]<<16|oob_data[mtd->oobsize-2-4*j]<<8|oob_data[mtd->oobsize-1-4*j];
-+
-+ //opcode=FLASH_READ_REG(NFLASH_ECC_CODE_GEN0+(j*4));
-+
-+ FLASH_WRITE_REG(NFLASH_ECC_OOB, opcode);
-+ opcode = 0x00000000|(j<<8); //select ECC code generation 0
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, opcode); //???
-+
-+ opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
-+ if((opcode&0x00000003)==0x03)
-+ {
-+ printk (KERN_WARNING "\nPageRead Uncorrectable error !!\n");
-+ ecc_failed++;
-+ }
-+ else if((opcode&0x00000003)==0x01)
-+ {
-+ printk (KERN_WARNING "\nPageRead One bit data error !!");
-+ // correct data
-+ if((data_poi[(opcode&0xff80)>>7]>>((opcode&0x38)>>3))%1)
-+ data_poi[(opcode&0xff80)>>7] &= ~(1<<((opcode&0x38)>>3));
-+ else
-+ data_poi[(opcode&0xff80)>>7] |= (1<<((opcode&0x38)>>3));
-+
-+ }
-+ else if((opcode&0x00000003)==0x02)
-+ {
-+ printk (KERN_WARNING "\nPageRead One bit ECC error !!\n");
-+ }
-+ else if((opcode&0x00000003)==0x00)
-+ {
-+
-+ }
-+
-+ }//for 2k page
-+readdata:
-+ if (col || (len - read) < end) {
-+ for (j = col; j < end && read < len; j++)
-+ buf[read++] = data_poi[j];
-+ } else
-+ read += mtd->oobblock;
-+ /* For subsequent reads align to page boundary. */
-+ col = 0;
-+ /* Increment page address */
-+ page++;
-+ schedule();
-+ }
-+ /* De-select the NAND device */
-+ //this->select_chip(mtd, -1);
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
-+ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_INDIRECT);
-+ /* Wake up anyone waiting on the device */
-+ spin_lock_bh (&this->chip_lock);
-+ this->state = FL_READY;
-+ wake_up (&this->wq);
-+ spin_unlock_bh (&this->chip_lock);
-+
-+ /*
-+ * Return success, if no ECC failures, else -EIO
-+ * fs driver will take care of that, because
-+ * retlen == desired len and result == -EIO
-+ */
-+ *retlen = read;
-+ return ecc_failed ? -EIO : 0;
-+}
-+
-+/*
-+ * Wait for command done. This applies to erase and program only
-+ * Erase can take up to 400ms and program up to 20ms according to
-+ * general NAND and SmartMedia specs
-+ *
-+*/
-+static int sl2312_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this, int state)
-+{
-+ unsigned long timeo = jiffies;
-+ int status, opcode;
-+
-+ if (state == FL_ERASING)
-+ timeo += (HZ * 400) / 1000;
-+ else
-+ timeo += (HZ * 20) / 1000;
-+
-+ spin_lock_bh (&this->chip_lock);
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
-+ FLASH_WRITE_REG(NFLASH_COUNT, 0x007f000070); //set only command no address and two data
-+
-+ FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x00000070); //write read status command
-+
-+
-+ opcode = 0x80002000|DWIDTH|CHIP_EN; //set start bit & 8bits read command
-+ FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
-+
-+ while(opcode&0x80000000) //polling flash access 31b
-+ {
-+ opcode=FLASH_READ_REG(NFLASH_ACCESS);
-+ //sl2312_flash_delay();
-+ schedule();
-+ }
-+
-+ while (time_before(jiffies, timeo)) {
-+ /* Check, if we were interrupted */
-+ if (this->state != state) {
-+ spin_unlock_bh (&this->chip_lock);
-+ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+ return 0;
-+ }
-+ if (this->dev_ready) {
-+ if (this->dev_ready(mtd))
-+ break;
-+ }
-+ if (FLASH_READ_REG(NFLASH_DATA) & 0x40)
-+ break;
-+
-+ spin_unlock_bh (&this->chip_lock);
-+ yield ();
-+ spin_lock_bh (&this->chip_lock);
-+ }
-+ status = FLASH_READ_REG(NFLASH_DATA)&0xff;
-+ spin_unlock_bh (&this->chip_lock);
-+ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+ return status;
-+}
-+
-+static int sl2312_nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
-+{
-+ int i, col, page, j=0;
-+ //int erase_state = 0;
-+ struct nand_chip *this = mtd->priv;
-+ u_char *databuf, *oobbuf;
-+
-+ databuf = &this->data_buf[0];
-+ oobbuf = &this->data_buf[mtd->oobblock];
-+ for (i = 0; i < mtd->oobsize; i++)
-+ oobbuf[i] = 0xff;
-+
-+ DEBUG (MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
-+
-+ /* Shift to get page */
-+ page = ((int) from) >> this->page_shift;
-+
-+ /* Mask to get column */
-+ col = from & (mtd->oobsize-1); //0x0f;
-+
-+ /* Initialize return length value */
-+ *retlen = 0;
-+ sl2312_nand_read_ecc (mtd, page, mtd->oobblock , retlen, databuf, oobbuf, NULL);
-+ for(i=col,j=0;i<mtd->oobsize||i<(col+len);i++,j++)
-+ buf[j] = oobbuf[i];
-+
-+ *retlen = j ;
-+ return 0;
-+}
-+
-+#define NOTALIGNED(x) (x & (mtd->oobblock-1)) != 0
-+/*
-+* Use NAND write ECC
-+*/
-+static int sl2312_nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf)
-+{
-+ return (sl2312_nand_write_ecc (mtd, to, len, retlen, buf, NULL, NULL));
-+}
-+
-+/*
-+ * NAND write with ECC
-+ */
-+static int sl2312_nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
-+ size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel)
-+{
-+ int page, ret = 0, oob = 0, written = 0;
-+ struct nand_chip *this = mtd->priv;
-+
-+ DEBUG (MTD_DEBUG_LEVEL3, "nand_write_ecc: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
-+
-+
-+ /* Do not allow write past end of device */
-+ if ((to + len) > mtd->size) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Attempt to write past end of page\n");
-+ return -EINVAL;
-+ }
-+
-+ /* reject writes, which are not page aligned */
-+ if (NOTALIGNED (to) || NOTALIGNED(len)) {
-+ printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
-+ return -EINVAL;
-+ }
-+
-+ // if oobsel is NULL, use chip defaults
-+ if (oobsel == NULL)
-+ oobsel = &mtd->oobinfo;
-+
-+ /* Shift to get page */
-+ page = ((int) to) >> this->page_shift;
-+
-+ /* Grab the lock and see if the device is available */
-+ sl2312_nand_get_chip (this, mtd, FL_WRITING, NULL);
-+
-+ /* Select the NAND device */
-+ this->select_chip(mtd, 0);
-+
-+ /* Check the WP bit */
-+ if (!(sl2312_device_ready(mtd) & 0x80)) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Device is write protected!!!\n");
-+ ret = -EIO;
-+ goto out;
-+ }
-+
-+ /* Loop until all data is written */
-+ while (written < len) {
-+ //udelay(100);
-+ int cnt = mtd->oobblock;
-+ this->data_poi = (u_char*) &buf[written];
-+ /* We use the same function for write and writev */
-+ if (eccbuf) {
-+ ret = sl2312_nand_write_page (mtd, this, page, &eccbuf[oob], oobsel);
-+ oob += mtd->oobsize;
-+ } else
-+ ret = sl2312_nand_write_page (mtd, this, page, NULL, oobsel);
-+
-+ if (ret)
-+ goto out;
-+
-+ /* Update written bytes count */
-+ written += cnt;
-+ /* Increment page address */
-+ page++;
-+ }
-+
-+out:
-+ /* De-select the NAND device */
-+ //this->select_chip(mtd, -1);
-+
-+ /* Wake up anyone waiting on the device */
-+ spin_lock_bh (&this->chip_lock);
-+ this->state = FL_READY;
-+ wake_up (&this->wq);
-+ spin_unlock_bh (&this->chip_lock);
-+
-+ *retlen = written;
-+ return ret;
-+}
-+
-+/*
-+ * Nand_page_program function is used for write and writev !
-+ * This function will always program a full page of data
-+ * If you call it with a non page aligned buffer, you're lost :)
-+ */
-+static int sl2312_nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf, struct nand_oobinfo *oobsel)
-+{
-+ int i, j, status, opcode;
-+ u_char ecc_code[16], *oob_data;
-+ int eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
-+ //int *oob_config = oobsel->eccpos;
-+
-+ /* pad oob area, if we have no oob buffer from fs-driver */
-+ if (!oob_buf) {
-+ oob_data = &this->data_buf[mtd->oobblock];
-+ for (i = 0; i < mtd->oobsize; i++)
-+ oob_data[i] = 0xff;
-+ } else
-+ oob_data = oob_buf;
-+
-+ /* Send command to begin auto page programming */
-+
-+ memset(oob_data,0xff,mtd->oobsize);
-+ /* Write out complete page of data, take care of eccmode */
-+ switch (eccmode) {
-+ /* No ecc and software ecc 3/256, write all */
-+ case NAND_ECC_NONE:
-+ printk (KERN_WARNING "Writing data without ECC to NAND-FLASH is not recommended\n");
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
-+ break;
-+ case NAND_ECC_SOFT:
-+ break;
-+
-+ /* Hardware ecc 3 byte / 256 data, write first half, get ecc, then second, if 512 byte pagesize */
-+ case NAND_ECC_HW3_256:
-+ break;
-+
-+ /* Hardware ecc 3 byte / 512 byte data, write full page */
-+ case NAND_ECC_HW3_512:
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x80000001); //set 31b = 0
-+
-+ /* Hardware ecc 6 byte / 512 byte data, write full page */
-+ case NAND_ECC_HW6_512:
-+ break;
-+
-+ default:
-+ printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
-+ //BUG();
-+ }
-+
-+ FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
-+
-+ for(i=0;i<mtd->oobblock;i++)
-+ {
-+ //udelay(5);
-+ FLASH_WRITE_DATA((page*mtd->oobblock)+i,this->data_poi[i]);
-+ }
-+ ///////////////
-+ if(eccmode!=NAND_ECC_NONE)
-+ {
-+ opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
-+ while(!(opcode&0x80000000)) //polling flash access 31b
-+ {
-+ opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
-+ //sl2312_flash_delay();
-+ schedule();
-+ }
-+
-+
-+ for(i=0;i<(mtd->oobblock/512);i++)
-+ {
-+ opcode=FLASH_READ_REG(NFLASH_ECC_CODE_GEN0+(i*4));
-+
-+ for(j=3;j>0;j--)
-+ oob_data[(mtd->oobsize-j-(i*4))] = (opcode<<((4-j)*8)) >>24;
-+
-+ for(j=0;j<4;j++)
-+ {
-+ ecc_code[15-i*4] = opcode;
-+ ecc_code[15-i*4-1] = opcode>>8;
-+ ecc_code[15-i*4-2] = opcode>>16;
-+ }
-+ }
-+
-+ //disable ecc
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000);
-+
-+ /* Write out OOB data */
-+ for(i=0;i<mtd->oobsize;i++)
-+ {
-+ //udelay(5);
-+ FLASH_WRITE_DATA((page*mtd->oobblock)+mtd->oobblock+i,oob_data[i]);
-+ }
-+ }
-+ else
-+ {
-+ for(i=0;i<mtd->oobsize;i++)
-+ {
-+ //udelay(5);
-+ FLASH_WRITE_DATA((page*mtd->oobblock)+mtd->oobblock+i,0xff);
-+ }
-+ }
-+
-+
-+ /* call wait ready function */
-+ status = this->waitfunc (mtd, this, FL_WRITING);
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
-+ /* See if device thinks it succeeded */
-+ if (status & 0x01) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write, page 0x%08x, ", __FUNCTION__, page);
-+ FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
-+ return -EIO;
-+ }
-+
-+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
-+ /*
-+ * The NAND device assumes that it is always writing to
-+ * a cleanly erased page. Hence, it performs its internal
-+ * write verification only on bits that transitioned from
-+ * 1 to 0. The device does NOT verify the whole page on a
-+ * byte by byte basis. It is possible that the page was
-+ * not completely erased or the page is becoming unusable
-+ * due to wear. The read with ECC would catch the error
-+ * later when the ECC page check fails, but we would rather
-+ * catch it early in the page write stage. Better to write
-+ * no data than invalid data.
-+ */
-+
-+ /* Send command to read back the page */
-+ this->cmdfunc (mtd, NAND_CMD_READ0, 0, page);
-+ /* Loop through and verify the data */
-+ if (this->verify_buf(mtd, this->data_poi, mtd->oobblock)) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
-+ return -EIO;
-+ }
-+
-+ /* check, if we have a fs-supplied oob-buffer */
-+ if (oob_buf) {
-+ if (this->verify_buf(mtd, oob_data, mtd->oobsize)) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
-+ return -EIO;
-+ }
-+ } else {
-+ if (eccmode != NAND_ECC_NONE) {
-+ int ecc_bytes = 0;
-+
-+ switch (this->eccmode) {
-+ case NAND_ECC_SOFT:
-+ case NAND_ECC_HW3_256: ecc_bytes = (mtd->oobblock == 512) ? 6 : 3; break;
-+ case NAND_ECC_HW3_512: ecc_bytes = 3; break;
-+ case NAND_ECC_HW6_512: ecc_bytes = 6; break;
-+ }
-+
-+
-+
-+ for(i=0;i < (mtd->oobblock+mtd->oobsize);i++)
-+ {
-+ if(i>=mtd->oobblock)
-+ oob_data[i-mtd->oobblock] = FLASH_READ_DATA((page*mtd->oobblock) +i);
-+ else
-+ oob_data[0] = FLASH_READ_DATA((page*mtd->oobblock) +i);
-+ }
-+
-+ if(this->eccmode == NAND_ECC_HW3_512)
-+ {
-+ for(i=0;i<(mtd->oobblock/512);i++)
-+ {
-+ for(j=0;j<3;j++)
-+ {
-+ if (oob_data[mtd->oobsize-1-j-4*i] != ecc_code[15-j-4*i]) {
-+ DEBUG (MTD_DEBUG_LEVEL0,
-+ "%s: Failed ECC write "
-+ "verify, page 0x%08x, " "%6i bytes were succesful\n", __FUNCTION__, page, i);
-+ return -EIO;
-+ }
-+ }
-+ }
-+ }
-+ }//eccmode != NAND_ECC_NONE
-+ }
-+ /*
-+ * Terminate the read command. This is faster than sending a reset command or
-+ * applying a 20us delay before issuing the next programm sequence.
-+ * This is not a problem for all chips, but I have found a bunch of them.
-+ */
-+ //this->select_chip(mtd, -1);
-+ //this->select_chip(mtd, 0);
-+#endif
-+
-+ return 0;
-+}
-+
-+/*
-+ * NAND write with iovec
-+ */
-+static int sl2312_nand_writev (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
-+ loff_t to, size_t * retlen)
-+{
-+ return (sl2312_nand_writev_ecc (mtd, vecs, count, to, retlen, NULL, 0));
-+}
-+
-+static int sl2312_nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
-+ loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel)
-+{
-+ int i, page, len, total_len, ret = 0, written = 0;
-+ struct nand_chip *this = mtd->priv;
-+
-+ /* Calculate total length of data */
-+ total_len = 0;
-+ for (i = 0; i < count; i++)
-+ total_len += (int) vecs[i].iov_len;
-+
-+ DEBUG (MTD_DEBUG_LEVEL3,
-+ "nand_writev: to = 0x%08x, len = %i, count = %ld\n", (unsigned int) to, (unsigned int) total_len, count);
-+
-+ /* Do not allow write past end of page */
-+ if ((to + total_len) > mtd->size) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_writev: Attempted write past end of device\n");
-+ return -EINVAL;
-+ }
-+
-+ /* reject writes, which are not page aligned */
-+ if (NOTALIGNED (to) || NOTALIGNED(total_len)) {
-+ printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
-+ return -EINVAL;
-+ }
-+
-+ // if oobsel is NULL, use chip defaults
-+ if (oobsel == NULL)
-+ oobsel = &mtd->oobinfo;
-+
-+ /* Shift to get page */
-+ page = ((int) to) >> this->page_shift;
-+
-+ /* Grab the lock and see if the device is available */
-+ sl2312_nand_get_chip (this, mtd, FL_WRITING, NULL);
-+
-+ /* Select the NAND device */
-+ this->select_chip(mtd, 0);
-+
-+ /* Check the WP bit */
-+ if (!(sl2312_device_ready(mtd) & 0x80)) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "sl2312_nand_writev_ecc: Device is write protected!!!\n");
-+ ret = -EIO;
-+ goto out;
-+ }
-+
-+ /* Loop until all iovecs' data has been written */
-+ len = 0;
-+ while (count) {
-+ /*
-+ * Check, if the tuple gives us not enough data for a
-+ * full page write. Then we can use the iov direct,
-+ * else we have to copy into data_buf.
-+ */
-+ if ((vecs->iov_len - len) >= mtd->oobblock) {
-+ this->data_poi = (u_char *) vecs->iov_base;
-+ this->data_poi += len;
-+ len += mtd->oobblock;
-+ /* Check, if we have to switch to the next tuple */
-+ if (len >= (int) vecs->iov_len) {
-+ vecs++;
-+ len = 0;
-+ count--;
-+ }
-+ } else {
-+ /*
-+ * Read data out of each tuple until we have a full page
-+ * to write or we've read all the tuples.
-+ */
-+ int cnt = 0;
-+ while ((cnt < mtd->oobblock) && count) {
-+ if (vecs->iov_base != NULL && vecs->iov_len) {
-+ this->data_buf[cnt++] = ((u_char *) vecs->iov_base)[len++];
-+ }
-+ /* Check, if we have to switch to the next tuple */
-+ if (len >= (int) vecs->iov_len) {
-+ vecs++;
-+ len = 0;
-+ count--;
-+ }
-+ }
-+ this->data_poi = this->data_buf;
-+ }
-+
-+ /* We use the same function for write and writev !) */
-+ ret = sl2312_nand_write_page (mtd, this, page, NULL, oobsel);
-+ if (ret)
-+ goto out;
-+
-+ /* Update written bytes count */
-+ written += mtd->oobblock;;
-+
-+ /* Increment page address */
-+ page++;
-+ }
-+
-+out:
-+ /* De-select the NAND device */
-+ //this->select_chip(mtd, -1);
-+
-+ /* Wake up anyone waiting on the device */
-+ spin_lock_bh (&this->chip_lock);
-+ this->state = FL_READY;
-+ wake_up (&this->wq);
-+ spin_unlock_bh (&this->chip_lock);
-+
-+ *retlen = written;
-+ return ret;
-+}
-+
-+/*
-+static u_char ffchars[] = {
-+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
-+};
-+*/
-+/*
-+ * NAND write out-of-band
-+ */
-+static int sl2312_nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf)
-+{
-+ int column, page, status, ret = 0, j=0;
-+ struct nand_chip *this = mtd->priv;
-+ u_char *databuf, *oobbuf;
-+
-+
-+ databuf = &this->data_buf[0];
-+ oobbuf = &this->data_buf[mtd->oobblock];
-+ for (j = 0; j < mtd->oobsize; j++)
-+ oobbuf[j] = 0xff;
-+//#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
-+// int i;
-+//#endif
-+
-+ DEBUG (MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
-+
-+ /* Shift to get page */
-+ page = ((int) to) >> this->page_shift;
-+
-+ /* Mask to get column */
-+ column = to & 0x1f;
-+
-+ /* Initialize return length value */
-+ *retlen = 0;
-+
-+ /* Do not allow write past end of page */
-+ if ((column + len) > mtd->oobsize) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: Attempt to write past end of page\n");
-+ return -EINVAL;
-+ }
-+
-+ /* Grab the lock and see if the device is available */
-+ sl2312_nand_get_chip (this, mtd, FL_WRITING, NULL);
-+
-+ /* Select the NAND device */
-+ this->select_chip(mtd, 0);
-+
-+ /* Reset the chip. Some chips (like the Toshiba TC5832DC found
-+ in one of my DiskOnChip 2000 test units) will clear the whole
-+ data page too if we don't do this. I have no clue why, but
-+ I seem to have 'fixed' it in the doc2000 driver in
-+ August 1999. dwmw2. */
-+ this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
-+
-+ /* Check the WP bit */
-+ if (!(sl2312_device_ready(mtd) & 0x80)) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: Device is write protected!!!\n");
-+ ret = -EIO;
-+ goto out;
-+ }
-+ /* Write out desired data */
-+ this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock, page);
-+
-+ sl2312_nand_read_ecc (mtd, page, mtd->oobblock , retlen, databuf, oobbuf, NULL);
-+
-+ for(j=column;j<(column+len);j++)
-+ oobbuf[j] = buf[j-column];
-+ sl2312_nand_write_ecc (mtd, page, mtd->oobblock, retlen, databuf, oobbuf, NULL);
-+
-+ status = this->waitfunc (mtd, this, FL_WRITING);
-+
-+ /* See if device thinks it succeeded */
-+ if (status & 0x01) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write, page 0x%08x\n", page);
-+ ret = -EIO;
-+ goto out;
-+ }
-+ /* Return happy */
-+ *retlen = len;
-+
-+
-+out:
-+ /* De-select the NAND device */
-+ //this->select_chip(mtd, -1);
-+
-+ /* Wake up anyone waiting on the device */
-+ spin_lock_bh (&this->chip_lock);
-+ this->state = FL_READY;
-+ wake_up (&this->wq);
-+ spin_unlock_bh (&this->chip_lock);
-+
-+ return ret;
-+}
-+
-+/*
-+ * NAND sync
-+ */
-+static void sl2312_nand_sync (struct mtd_info *mtd)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ DECLARE_WAITQUEUE (wait, current);
-+
-+ DEBUG (MTD_DEBUG_LEVEL3, "nand_sync: called\n");
-+
-+retry:
-+ /* Grab the spinlock */
-+ spin_lock_bh (&this->chip_lock);
-+
-+ /* See what's going on */
-+ switch (this->state) {
-+ case FL_READY:
-+ case FL_SYNCING:
-+ this->state = FL_SYNCING;
-+ spin_unlock_bh (&this->chip_lock);
-+ break;
-+
-+ default:
-+ /* Not an idle state */
-+ add_wait_queue (&this->wq, &wait);
-+ spin_unlock_bh (&this->chip_lock);
-+ schedule ();
-+
-+ remove_wait_queue (&this->wq, &wait);
-+ goto retry;
-+ }
-+
-+ /* Lock the device */
-+ spin_lock_bh (&this->chip_lock);
-+
-+ /* Set the device to be ready again */
-+ if (this->state == FL_SYNCING) {
-+ this->state = FL_READY;
-+ wake_up (&this->wq);
-+ }
-+
-+ /* Unlock the device */
-+ spin_unlock_bh (&this->chip_lock);
-+}
-+
-+
-+/*
-+ * Scan for the NAND device
-+ */
-+int sl2312_nand_scan (struct mtd_info *mtd, int maxchips)
-+{
-+ int i, j, nand_maf_id, nand_dev_id, busw;
-+ struct nand_chip *this = mtd->priv;
-+ unsigned char id[4];
-+
-+ /* Get buswidth to select the correct functions*/
-+ busw = this->options & NAND_BUSWIDTH_16;
-+
-+ /* check for proper chip_delay setup, set 20us if not */
-+ if (!this->chip_delay)
-+ this->chip_delay = 20;
-+
-+ /* check, if a user supplied command function given */
-+ if (this->cmdfunc == NULL)
-+ this->cmdfunc = sl2312_nand_command;
-+
-+ /* check, if a user supplied wait function given */
-+ if (this->waitfunc == NULL)
-+ this->waitfunc = sl2312_nand_waitfunc;
-+
-+ if (!this->select_chip)
-+ this->select_chip = sl2312_nand_select_chip;
-+ if (!this->write_byte)
-+ this->write_byte = sl2312_nand_write_byte; //busw ? nand_write_byte16 : nand_write_byte;
-+ if (!this->read_byte)
-+ this->read_byte = sl2312_nand_read_byte; //busw ? nand_read_byte16 : nand_read_byte;
-+// if (!this->write_word)
-+// this->write_word = nand_write_word;
-+// if (!this->read_word)
-+// this->read_word = nand_read_word;
-+// if (!this->block_bad)
-+ this->block_bad = sl2312_nand_block_bad; //nand_block_bad;
-+ if (!this->block_markbad)
-+ this->block_markbad = sl2312_nand_default_block_markbad;
-+ if (!this->write_buf)
-+ this->write_buf = sl2312_nand_write_buf; //busw ? nand_write_buf16 : nand_write_buf;
-+ if (!this->read_buf)
-+ this->read_buf = sl2312_nand_read_buf; //busw ? nand_read_buf16 : nand_read_buf;
-+ if (!this->verify_buf)
-+ this->verify_buf = sl2312_nand_verify_buf; //busw ? nand_verify_buf16 : nand_verify_buf;
-+ if (!this->scan_bbt)
-+ this->scan_bbt = sl2312_nand_scan_bbt;
-+
-+ /* Select the device */
-+ this->select_chip(mtd, 0);
-+
-+ /* Read manufacturer and device IDs */
-+ nand_read_id(0,id);
-+
-+ nand_maf_id = id[0];
-+ nand_dev_id = id[1];
-+
-+ /* Print and store flash device information */
-+ for (i = 0; nand_flash_ids[i].name != NULL; i++) {
-+
-+ if (nand_dev_id != nand_flash_ids[i].id)
-+ continue;
-+
-+ if (!mtd->name) mtd->name = nand_flash_ids[i].name;
-+ this->chipsize = nand_flash_ids[i].chipsize << 20;
-+
-+ /* New devices have all the information in additional id bytes */
-+ if (!nand_flash_ids[i].pagesize) {
-+ int extid;
-+
-+ /* The 4th id byte is the important one */
-+ extid = id[3];
-+ /* Calc pagesize */
-+ mtd->oobblock = 1024 << (extid & 0x3);
-+ extid >>= 2;
-+ /* Calc oobsize */
-+ mtd->oobsize = (8 << (extid & 0x03)) * (mtd->oobblock / 512);
-+ extid >>= 2;
-+ /* Calc blocksize. Blocksize is multiples of 64KiB */
-+ mtd->erasesize = (64 * 1024) << (extid & 0x03);
-+ extid >>= 2;
-+ /* Get buswidth information */
-+ busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
-+
-+ } else {
-+ /* Old devices have this data hardcoded in the
-+ * device id table */
-+ mtd->erasesize = nand_flash_ids[i].erasesize;
-+ mtd->oobblock = nand_flash_ids[i].pagesize;
-+ mtd->oobsize = mtd->oobblock / 32;
-+ busw = nand_flash_ids[i].options & NAND_BUSWIDTH_16;
-+ }
-+
-+ /* Check, if buswidth is correct. Hardware drivers should set
-+ * this correct ! */
-+ if (busw != (this->options & NAND_BUSWIDTH_16)) {
-+ printk (KERN_INFO "NAND device: Manufacturer ID:"
-+ " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id,
-+ nand_manuf_ids[i].name , mtd->name);
-+ printk (KERN_WARNING
-+ "NAND bus width %d instead %d bit\n",
-+ (this->options & NAND_BUSWIDTH_16) ? 16 : 8,
-+ busw ? 16 : 8);
-+ this->select_chip(mtd, -1);
-+ return 1;
-+ }
-+
-+ /* Calculate the address shift from the page size */
-+ this->page_shift = ffs(mtd->oobblock) - 1;
-+ this->bbt_erase_shift = this->phys_erase_shift = ffs(mtd->erasesize) - 1;
-+ this->chip_shift = ffs(this->chipsize) - 1;
-+
-+ /* Set the bad block position */
-+ this->badblockpos = mtd->oobblock > 512 ?
-+ NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS;
-+
-+ /* Get chip options, preserve non chip based options */
-+ this->options &= ~NAND_CHIPOPTIONS_MSK;
-+ this->options |= nand_flash_ids[i].options & NAND_CHIPOPTIONS_MSK;
-+ /* Set this as a default. Board drivers can override it, if neccecary */
-+ this->options |= NAND_NO_AUTOINCR;
-+ /* Check if this is a not a samsung device. Do not clear the options
-+ * for chips which are not having an extended id.
-+ */
-+ if (nand_maf_id != NAND_MFR_SAMSUNG && !nand_flash_ids[i].pagesize)
-+ this->options &= ~NAND_SAMSUNG_LP_OPTIONS;
-+
-+ /* Check for AND chips with 4 page planes */
-+ // if (this->options & NAND_4PAGE_ARRAY)
-+ // this->erase_cmd = multi_erase_cmd;
-+ // else
-+ // this->erase_cmd = single_erase_cmd;
-+
-+ /* Do not replace user supplied command function ! */
-+ // if (mtd->oobblock > 512 && this->cmdfunc == nand_command)
-+ // this->cmdfunc = nand_command_lp;
-+
-+ /* Try to identify manufacturer */
-+ for (j = 0; nand_manuf_ids[j].id != 0x0; j++) {
-+ if (nand_manuf_ids[j].id == nand_maf_id)
-+ break;
-+ }
-+ printk (KERN_INFO "NAND device: Manufacturer ID:"
-+ " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id,
-+ nand_manuf_ids[j].name , nand_flash_ids[i].name);
-+ break;
-+ }
-+ /////////////////////////////
-+
-+ for (i=1; i < maxchips; i++) {
-+ this->select_chip(mtd, i);
-+
-+ /* Send the command for reading device ID */
-+ nand_read_id(1,id);
-+
-+ /* Read manufacturer and device IDs */
-+ if (nand_maf_id != id[0] ||
-+ nand_dev_id != id[1])
-+ break;
-+ }
-+ if (i > 1)
-+ printk(KERN_INFO "%d NAND chips detected\n", i);
-+
-+ /* Allocate buffers, if neccecary */
-+ if (!this->oob_buf) {
-+ size_t len;
-+ len = mtd->oobsize << (this->phys_erase_shift - this->page_shift);
-+ this->oob_buf = kmalloc (len, GFP_KERNEL);
-+ if (!this->oob_buf) {
-+ printk (KERN_ERR "nand_scan(): Cannot allocate oob_buf\n");
-+ return -ENOMEM;
-+ }
-+ this->options |= NAND_OOBBUF_ALLOC;
-+ }
-+
-+ if (!this->data_buf) {
-+ size_t len;
-+ len = mtd->oobblock + mtd->oobsize;
-+ this->data_buf = kmalloc (len, GFP_KERNEL);
-+ if (!this->data_buf) {
-+ if (this->options & NAND_OOBBUF_ALLOC)
-+ kfree (this->oob_buf);
-+ printk (KERN_ERR "nand_scan(): Cannot allocate data_buf\n");
-+ return -ENOMEM;
-+ }
-+ this->options |= NAND_DATABUF_ALLOC;
-+ }
-+
-+ /* Store the number of chips and calc total size for mtd */
-+ this->numchips = i;
-+ mtd->size = i * this->chipsize;
-+ /* Convert chipsize to number of pages per chip -1. */
-+ this->pagemask = (this->chipsize >> this->page_shift) - 1;
-+ /* Preset the internal oob buffer */
-+ memset(this->oob_buf, 0xff, mtd->oobsize << (this->phys_erase_shift - this->page_shift));
-+
-+ /* If no default placement scheme is given, select an
-+ * appropriate one */
-+ if (!this->autooob) {
-+ /* Select the appropriate default oob placement scheme for
-+ * placement agnostic filesystems */
-+ switch (mtd->oobsize) {
-+ case 8:
-+ this->autooob = &nand_oob_8;
-+ break;
-+ case 16:
-+ this->autooob = &nand_oob_16;
-+ break;
-+ case 64:
-+ this->autooob = &nand_oob_64;
-+ break;
-+ default:
-+ printk (KERN_WARNING "No oob scheme defined for oobsize %d\n",
-+ mtd->oobsize);
-+ BUG();
-+ }
-+ }
-+
-+ /* The number of bytes available for the filesystem to place fs dependend
-+ * oob data */
-+ if (this->options & NAND_BUSWIDTH_16) {
-+ mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 2);
-+ if (this->autooob->eccbytes & 0x01)
-+ mtd->oobavail--;
-+ } else
-+ mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 1);
-+
-+
-+ /*
-+ * check ECC mode, default to software
-+ * if 3byte/512byte hardware ECC is selected and we have 256 byte pagesize
-+ * fallback to software ECC
-+ */
-+ this->eccsize = 256; /* set default eccsize */
-+ this->eccbytes = 3;
-+
-+ switch (this->eccmode) {
-+ case NAND_ECC_HW12_2048:
-+ if (mtd->oobblock < 2048) {
-+ printk(KERN_WARNING "2048 byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
-+ mtd->oobblock);
-+ this->eccmode = NAND_ECC_SOFT;
-+ this->calculate_ecc = nand_calculate_ecc;
-+ this->correct_data = nand_correct_data;
-+ } else
-+ this->eccsize = 2048;
-+ break;
-+
-+ case NAND_ECC_HW3_512:
-+ case NAND_ECC_HW6_512:
-+ case NAND_ECC_HW8_512:
-+ if (mtd->oobblock == 256) {
-+ printk (KERN_WARNING "512 byte HW ECC not possible on 256 Byte pagesize, fallback to SW ECC \n");
-+ this->eccmode = NAND_ECC_SOFT;
-+ this->calculate_ecc = nand_calculate_ecc;
-+ this->correct_data = nand_correct_data;
-+ } else
-+ this->eccsize = 512; /* set eccsize to 512 */
-+ break;
-+
-+ case NAND_ECC_HW3_256:
-+ break;
-+
-+ case NAND_ECC_NONE:
-+ printk (KERN_WARNING "NAND_ECC_NONE selected by board driver. This is not recommended !!\n");
-+ this->eccmode = NAND_ECC_NONE;
-+ break;
-+
-+ case NAND_ECC_SOFT:
-+ this->calculate_ecc = nand_calculate_ecc;
-+ this->correct_data = nand_correct_data;
-+ break;
-+
-+ default:
-+ printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
-+ BUG();
-+ }
-+
-+ /* Check hardware ecc function availability and adjust number of ecc bytes per
-+ * calculation step
-+ */
-+ switch (this->eccmode) {
-+ case NAND_ECC_HW12_2048:
-+ this->eccbytes += 4;
-+ case NAND_ECC_HW8_512:
-+ this->eccbytes += 2;
-+ case NAND_ECC_HW6_512:
-+ this->eccbytes += 3;
-+// case NAND_ECC_HW3_512:
-+ case NAND_ECC_HW3_256:
-+ if (this->calculate_ecc && this->correct_data && this->enable_hwecc)
-+ break;
-+ printk (KERN_WARNING "No ECC functions supplied, Hardware ECC not possible\n");
-+ BUG();
-+ }
-+
-+ mtd->eccsize = this->eccsize;
-+
-+ /* Set the number of read / write steps for one page to ensure ECC generation */
-+ switch (this->eccmode) {
-+ case NAND_ECC_HW12_2048:
-+ this->eccsteps = mtd->oobblock / 2048;
-+ break;
-+ case NAND_ECC_HW3_512:
-+ case NAND_ECC_HW6_512:
-+ case NAND_ECC_HW8_512:
-+ this->eccsteps = mtd->oobblock / 512;
-+ break;
-+ case NAND_ECC_HW3_256:
-+ case NAND_ECC_SOFT:
-+ this->eccsteps = mtd->oobblock / 256;
-+ break;
-+
-+ case NAND_ECC_NONE:
-+ this->eccsteps = 1;
-+ break;
-+ }
-+
-+ /* Initialize state, waitqueue and spinlock */
-+ this->state = FL_READY;
-+ init_waitqueue_head (&this->wq);
-+ spin_lock_init (&this->chip_lock);
-+
-+ /* De-select the device */
-+ this->select_chip(mtd, 0);
-+
-+ /* Print warning message for no device */
-+ if (!mtd->size) {
-+ printk (KERN_WARNING "No NAND device found!!!\n");
-+ return 1;
-+ }
-+
-+ /* Fill in remaining MTD driver data */
-+ mtd->type = MTD_NANDFLASH;
-+ mtd->flags = MTD_CAP_NANDFLASH | MTD_ECC;
-+ mtd->ecctype = MTD_ECC_SW;
-+ mtd->erase = sl2312_nand_erase;
-+ mtd->point = NULL;
-+ mtd->unpoint = NULL;
-+ mtd->read = sl2312_nand_read;
-+ mtd->write = sl2312_nand_write;
-+ mtd->read_ecc = sl2312_nand_read_ecc;
-+ mtd->write_ecc = sl2312_nand_write_ecc;
-+ mtd->read_oob = sl2312_nand_read_oob;
-+ mtd->write_oob = sl2312_nand_write_oob;
-+ mtd->readv = NULL;
-+ mtd->writev = sl2312_nand_writev;
-+ mtd->writev_ecc = sl2312_nand_writev_ecc;
-+ mtd->sync = sl2312_nand_sync;
-+ mtd->lock = NULL;
-+ mtd->unlock = NULL;
-+ mtd->suspend = NULL;
-+ mtd->resume = NULL;
-+ mtd->block_isbad = sl2312_nand_block_isbad;
-+ mtd->block_markbad = sl2312_nand_block_markbad;
-+
-+ /* and make the autooob the default one */
-+ memcpy(&mtd->oobinfo, this->autooob, sizeof(mtd->oobinfo));
-+
-+ mtd->owner = THIS_MODULE;
-+
-+ /* Build bad block table */
-+ return this->scan_bbt (mtd);
-+}
-+
-+/*End Add function*/
-+
-+/*
-+ * Main initialization routine
-+ */
-+extern int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
-+
-+int __init sl2312_mtd_init (void)
-+{
-+ struct nand_chip *this;
-+ int err = 0;
-+ struct mtd_partition *parts;
-+ int nr_parts = 0;
-+ int ret, data, *base;
-+
-+ printk("NAND MTD Driver Start Init ......\n");
-+
-+ base = (unsigned int *)(IO_ADDRESS(SL2312_GLOBAL_BASE) + 0x30);
-+ data = *base;
-+ data&=0xffffffeb;
-+ data|=0x3; //disable p & s flash
-+ *base = data;
-+
-+ /* Allocate memory for MTD device structure and private data */
-+ sl2312_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
-+ if (!sl2312_mtd) {
-+ printk ("Unable to allocate SL2312 NAND MTD device structure.\n");
-+ err = -ENOMEM;
-+ goto out;
-+ }
-+
-+ // sl2312_device_setup();
-+
-+ /* io is indirect via a register so don't need to ioremap address */
-+
-+ /* Get pointer to private data */
-+ this = (struct nand_chip *) (&sl2312_mtd[1]);
-+
-+ /* Initialize structures */
-+ memset((char *) sl2312_mtd, 0, sizeof(struct mtd_info));
-+ memset((char *) this, 0, sizeof(struct nand_chip));
-+
-+ /* Link the private data with the MTD structure */
-+ sl2312_mtd->priv = this;
-+ sl2312_mtd->name = "sl2312-nand";
-+
-+ /* Set address of NAND IO lines */
-+ this->IO_ADDR_R = (void __iomem *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE+NFLASH_DATA)); //(unsigned long)&(sl2312_ndfmcptr->dtr);
-+ this->IO_ADDR_W = (void __iomem *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE+NFLASH_DATA)); //(unsigned long)&(sl2312_ndfmcptr->dtr);
-+ this->read_byte = sl2312_nand_read_byte;
-+ this->write_byte = sl2312_nand_write_byte;
-+ this->write_buf = sl2312_nand_write_buf;
-+ this->read_buf = sl2312_nand_read_buf;
-+ this->verify_buf = sl2312_nand_verify_buf;
-+ this->select_chip = sl2312_nand_select_chip;
-+ this->block_bad = sl2312_nand_block_bad;
-+ this->hwcontrol = sl2312_hwcontrol;
-+ this->dev_ready = sl2312_device_ready;
-+ this->cmdfunc = sl2312_nand_command;
-+ this->waitfunc = sl2312_nand_waitfunc;
-+ //this->calculate_ecc = sl2312_readecc;
-+ this->enable_hwecc = sl2312_enable_hwecc;
-+ this->eccmode = NAND_ECC_HW3_512;
-+ /*this->eccsize = 512; */
-+ /* 20 us command delay time */
-+ this->chip_delay = 20;
-+
-+ this->correct_data = nand_correct_data;
-+// this->scan_bbt = sl2312_nand_scan_bbt;
-+
-+ /* Allocate memory for internal data buffer */
-+ this->data_buf = kmalloc (sizeof(u_char) * (sl2312_mtd->oobblock + sl2312_mtd->oobsize), GFP_KERNEL);
-+ if (!this->data_buf) {
-+ printk ("Unable to allocate NAND data buffer.\n");
-+ err = -ENOMEM;
-+ goto out_ior;
-+ }
-+
-+ /* Scan to find existance of the device */
-+ if (sl2312_nand_scan(sl2312_mtd, 1)) {
-+ err = -ENXIO;
-+ goto out_ior;
-+ }
-+
-+ /* Register the partitions */
-+ parts = sl2312_partitions;
-+ nr_parts = sizeof(sl2312_partitions)/sizeof(*parts);
-+
-+ ret = add_mtd_partitions(sl2312_mtd, sl2312_partitions, nr_parts);
-+ /*If we got an error, free all resources.*/
-+ if (ret < 0) {
-+ del_mtd_partitions(sl2312_mtd);
-+ map_destroy(sl2312_mtd);
-+ }
-+ goto out;
-+
-+//out_buf:
-+// kfree (this->data_buf);
-+out_ior:
-+out:
-+ printk("NAND MTD Driver Init Success ......\n");
-+ return err;
-+}
-+
-+module_init(sl2312_mtd_init);
-+
-+/*
-+ * Clean up routine
-+ */
-+#ifdef MODULE
-+static void __exit sl2312_cleanup (void)
-+{
-+ struct nand_chip *this = (struct nand_chip *) &sl2312_mtd[1];
-+
-+ /* Unregister partitions */
-+ del_mtd_partitions(sl2312_mtd);
-+
-+ /* Unregister the device */
-+ del_mtd_device (sl2312_mtd);
-+
-+ /* Free internal data buffers */
-+ kfree (this->data_buf);
-+
-+ /* Free the MTD device structure */
-+ kfree (sl2312_mtd);
-+}
-+module_exit(sl2312_cleanup);
-+#endif
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Alice Hennessy <ahennessy@mvista.com>");
-+MODULE_DESCRIPTION("Glue layer for SmartMediaCard on Toshiba RBsl2312");
---- /dev/null
-+++ b/drivers/mtd/nand/sl2312-flash-nand.h
-@@ -0,0 +1,24 @@
-+#ifndef SL2312_FLASH_NAND_H
-+#define SL2312_FLASH_NAND_H
-+
-+#include <linux/wait.h>
-+#include <linux/spinlock.h>
-+
-+/*Add function*/
-+static void nand_read_id(int chip_no,unsigned char *id);
-+
-+
-+
-+#define NFLASH_WiDTH8 0x00000000
-+#define NFLASH_WiDTH16 0x00000400
-+#define NFLASH_WiDTH32 0x00000800
-+#define NFLASH_CHIP0_EN 0x00000000 // 16th bit = 0
-+#define NFLASH_CHIP1_EN 0x00010000 // 16th bit = 1
-+#define NFLASH_DIRECT 0x00004000
-+#define NFLASH_INDIRECT 0x00000000
-+
-+
-+#define DWIDTH NFLASH_WiDTH8
-+
-+
-+#endif /* SL2312_FLASH_NAND_H */
---- /dev/null
-+++ b/include/linux/mtd/kvctl.h
-@@ -0,0 +1,40 @@
-+#ifndef KVCTL_H
-+#define KVCTL_H
-+
-+#define VCTL_HEAD_SIZE 8
-+#define VCTL_ENTRY_LEN 20
-+
-+typedef struct
-+{
-+ char header[4];
-+ unsigned int entry_num;
-+} vctl_mheader;
-+
-+typedef struct
-+{
-+ char header[4];
-+ unsigned int size;
-+ unsigned int type;
-+ char majorver[4];
-+ char minorver[4];
-+ unsigned char *payload;
-+} vctl_entry;
-+
-+typedef struct
-+{
-+ unsigned char mac[6];
-+ unsigned char vlanid;
-+ unsigned char vlanmap;
-+} vlaninfo;
-+
-+#define VCT_VENDORSPEC 0
-+#define VCT_BOOTLOADER 1
-+#define VCT_KERNEL 2
-+#define VCT_VERCTL 3
-+#define VCT_CURRCONF 4
-+#define VCT_DEFAULTCONF 5
-+#define VCT_ROOTFS 6
-+#define VCT_APP 7
-+#define VCT_VLAN 8
-+
-+#endif
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -71,3 +71,7 @@ obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o
- obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
- obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o
- obj-$(CONFIG_MTD_TQM834x) += tqm834x.o
-+###### for Storlink Soc #######
-+obj-$(CONFIG_MTD_SL2312_CFI) += sl2312-flash-cfi.o
-+obj-$(CONFIG_MTD_SL2312_SERIAL_ATMEL) += sl2312-flash-atmel.o
-+obj-$(CONFIG_MTD_SL2312_SERIAL_ST) += sl2312-flash-m25p80.o