aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/s3c24xx
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/s3c24xx')
-rw-r--r--target/linux/s3c24xx/patches-2.6.28/001-merge-openmoko.patch764
-rw-r--r--target/linux/s3c24xx/patches-2.6.28/005-dont-suspend-regulator.patch6
-rw-r--r--target/linux/s3c24xx/patches-2.6.28/010-preserve-resolution.patch8
3 files changed, 386 insertions, 392 deletions
diff --git a/target/linux/s3c24xx/patches-2.6.28/001-merge-openmoko.patch b/target/linux/s3c24xx/patches-2.6.28/001-merge-openmoko.patch
index d328602340..1092bc826a 100644
--- a/target/linux/s3c24xx/patches-2.6.28/001-merge-openmoko.patch
+++ b/target/linux/s3c24xx/patches-2.6.28/001-merge-openmoko.patch
@@ -7,7 +7,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
-@@ -69,12 +69,12 @@
+@@ -69,12 +69,12 @@ void __init vic_init(void __iomem *base,
/*
* Make sure we clear all existing interrupts
*/
@@ -23,7 +23,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
}
for (i = 0; i < 16; i++) {
-@@ -82,7 +82,7 @@
+@@ -82,7 +82,7 @@ void __init vic_init(void __iomem *base,
writel(VIC_VECT_CNTL_ENABLE | i, reg);
}
@@ -6657,7 +6657,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+CONFIG_HAS_DMA=y
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
-@@ -498,6 +498,13 @@
+@@ -498,6 +498,13 @@ config ARCH_S3C2410
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
the Samsung SMDK2410 development board (and derivatives).
@@ -6671,7 +6671,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
config ARCH_SHARK
bool "Shark"
select ISA
-@@ -590,6 +597,7 @@
+@@ -590,6 +597,7 @@ source "arch/arm/mach-orion5x/Kconfig"
source "arch/arm/mach-kirkwood/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
@@ -6679,7 +6679,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
source "arch/arm/plat-s3c/Kconfig"
if ARCH_S3C2410
-@@ -601,6 +609,11 @@
+@@ -601,6 +609,11 @@ source "arch/arm/mach-s3c2442/Kconfig"
source "arch/arm/mach-s3c2443/Kconfig"
endif
@@ -6691,7 +6691,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
source "arch/arm/mach-lh7a40x/Kconfig"
source "arch/arm/mach-imx/Kconfig"
-@@ -1256,6 +1269,8 @@
+@@ -1256,6 +1269,8 @@ source "drivers/usb/Kconfig"
source "drivers/uwb/Kconfig"
@@ -6700,7 +6700,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
source "drivers/mmc/Kconfig"
source "drivers/memstick/Kconfig"
-@@ -1268,6 +1283,8 @@
+@@ -1268,6 +1283,8 @@ source "drivers/rtc/Kconfig"
source "drivers/dma/Kconfig"
@@ -6711,7 +6711,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
source "drivers/auxdisplay/Kconfig"
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
-@@ -106,6 +106,8 @@
+@@ -106,6 +106,8 @@ SECTIONS
*(.got) /* Global offset table */
}
@@ -7757,7 +7757,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+ resume_dependency, int uart_index);
--- a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
-@@ -21,7 +21,15 @@
+@@ -21,7 +21,15 @@ struct s3c2410_spigpio_info {
int num_chipselect;
int bus_num;
@@ -7776,7 +7776,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
--- a/arch/arm/mach-s3c2410/include/mach/spi.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi.h
-@@ -22,5 +22,12 @@
+@@ -22,5 +22,12 @@ struct s3c2410_spi_info {
void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
};
@@ -7917,7 +7917,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
-#endif /* __ASM_ARCH_VMALLOC_H */
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
-@@ -9,6 +9,7 @@
+@@ -9,6 +9,7 @@ config CPU_S3C2410
depends on ARCH_S3C2410
select S3C2410_CLOCK
select S3C2410_GPIO
@@ -7925,7 +7925,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
select CPU_LLSERIAL_S3C2410
select S3C2410_PM if PM
help
-@@ -32,11 +33,6 @@
+@@ -32,11 +33,6 @@ config S3C2410_GPIO
help
GPIO code for S3C2410 and similar processors
@@ -7937,7 +7937,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
config SIMTEC_NOR
bool
help
-@@ -49,6 +45,12 @@
+@@ -49,6 +45,12 @@ config MACH_BAST_IDE
Internal node for machines with an BAST style IDE
interface
@@ -7950,7 +7950,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
menu "S3C2410 Machines"
config ARCH_SMDK2410
-@@ -84,6 +86,7 @@
+@@ -84,6 +86,7 @@ config ARCH_BAST
select PM_SIMTEC if PM
select SIMTEC_NOR
select MACH_BAST_IDE
@@ -7958,7 +7958,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
select ISA
help
Say Y here if you are using the Simtec Electronics EB2410ITX
-@@ -121,6 +124,7 @@
+@@ -121,6 +124,7 @@ config MACH_TCT_HAMMER
config MACH_VR1000
bool "Thorcom VR1000"
select PM_SIMTEC if PM
@@ -7966,7 +7966,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
select SIMTEC_NOR
select MACH_BAST_IDE
select CPU_S3C2410
-@@ -130,7 +134,16 @@
+@@ -130,7 +134,16 @@ config MACH_VR1000
config MACH_QT2410
bool "QT2410"
select CPU_S3C2410
@@ -7993,7 +7993,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#include <plat/devs.h>
#include <plat/cpu.h>
-@@ -150,7 +151,7 @@
+@@ -150,7 +151,7 @@ static struct platform_device *amlm5900_
#endif
&s3c_device_adc,
&s3c_device_wdt,
@@ -8002,7 +8002,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
&s3c_device_usb,
&s3c_device_rtc,
&s3c_device_usbgadget,
-@@ -233,6 +234,7 @@
+@@ -233,6 +234,7 @@ static void __init amlm5900_init(void)
#ifdef CONFIG_FB_S3C2410
s3c24xx_fb_set_platdata(&amlm5900_fb_info);
#endif
@@ -8023,7 +8023,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#include <mach/fb.h>
#include <linux/mtd/mtd.h>
-@@ -406,7 +406,7 @@
+@@ -406,7 +406,7 @@ static struct platform_device bast_sio =
* standard 100KHz i2c bus frequency
*/
@@ -8032,7 +8032,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
.flags = 0,
.slave_addr = 0x10,
.bus_freq = 100*1000,
-@@ -553,7 +553,7 @@
+@@ -553,7 +553,7 @@ static struct platform_device *bast_devi
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
@@ -8041,7 +8041,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
&s3c_device_rtc,
&s3c_device_nand,
&bast_device_dm9k,
-@@ -588,7 +588,8 @@
+@@ -588,7 +588,8 @@ static void __init bast_map_io(void)
s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
s3c_device_nand.dev.platform_data = &bast_nand_info;
@@ -8857,7 +8857,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#include <plat/pm.h>
static struct map_desc h1940_iodesc[] __initdata = {
-@@ -129,6 +131,11 @@
+@@ -129,6 +131,11 @@ static struct s3c2410_udc_mach_info h194
.vbus_pin_inverted = 1,
};
@@ -8869,7 +8869,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/**
* Set lcd on or off
-@@ -183,9 +190,10 @@
+@@ -183,9 +190,10 @@ static struct platform_device *h1940_dev
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
@@ -8881,7 +8881,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
&s3c_device_leds,
&s3c_device_bluetooth,
};
-@@ -201,7 +209,7 @@
+@@ -201,7 +209,7 @@ static void __init h1940_map_io(void)
#ifdef CONFIG_PM_H1940
memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
#endif
@@ -8890,7 +8890,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
}
static void __init h1940_init_irq(void)
-@@ -214,7 +222,9 @@
+@@ -214,7 +222,9 @@ static void __init h1940_init(void)
u32 tmp;
s3c24xx_fb_set_platdata(&h1940_fb_info);
@@ -8900,7 +8900,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
-@@ -223,10 +233,9 @@
+@@ -223,10 +233,9 @@ static void __init h1940_init(void)
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
@@ -8933,7 +8933,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
static struct map_desc n30_iodesc[] __initdata = {
/* nothing here yet */
-@@ -320,7 +320,7 @@
+@@ -320,7 +320,7 @@ static struct s3c2410fb_mach_info n30_fb
static struct platform_device *n30_devices[] __initdata = {
&s3c_device_lcd,
&s3c_device_wdt,
@@ -8942,7 +8942,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
&s3c_device_iis,
&s3c_device_usb,
&s3c_device_usbgadget,
-@@ -332,7 +332,7 @@
+@@ -332,7 +332,7 @@ static struct platform_device *n30_devic
static struct platform_device *n35_devices[] __initdata = {
&s3c_device_lcd,
&s3c_device_wdt,
@@ -8951,7 +8951,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
&s3c_device_iis,
&s3c_device_usbgadget,
&n35_button_device,
-@@ -501,7 +501,7 @@
+@@ -501,7 +501,7 @@ static void __init n30_init_irq(void)
static void __init n30_init(void)
{
s3c24xx_fb_set_platdata(&n30_fb_info);
@@ -8970,7 +8970,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#include <plat/cpu.h>
static struct map_desc otom11_iodesc[] __initdata = {
-@@ -94,7 +95,7 @@
+@@ -94,7 +95,7 @@ static struct platform_device *otom11_de
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
@@ -8979,7 +8979,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
&s3c_device_iis,
&s3c_device_rtc,
&otom_device_nor,
-@@ -109,6 +110,7 @@
+@@ -109,6 +110,7 @@ static void __init otom11_map_io(void)
static void __init otom11_init(void)
{
@@ -9011,7 +9011,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#include <plat/common-smdk.h>
#include <plat/devs.h>
-@@ -213,7 +214,7 @@
+@@ -213,7 +214,7 @@ static struct platform_device qt2410_led
/* SPI */
@@ -9020,7 +9020,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
{
switch (cs) {
case BITBANG_CS_ACTIVE:
-@@ -247,7 +248,7 @@
+@@ -247,7 +248,7 @@ static struct platform_device *qt2410_de
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
@@ -9029,7 +9029,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
&s3c_device_iis,
&s3c_device_sdi,
&s3c_device_usbgadget,
-@@ -320,6 +321,24 @@
+@@ -320,6 +321,24 @@ static int __init qt2410_tft_setup(char
__setup("tft=", qt2410_tft_setup);
@@ -9054,7 +9054,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
static void __init qt2410_map_io(void)
{
s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
-@@ -349,11 +368,12 @@
+@@ -349,11 +368,12 @@ static void __init qt2410_machine_init(v
s3c2410_gpio_setpin(S3C2410_GPB0, 1);
s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
@@ -9078,7 +9078,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#include <plat/devs.h>
#include <plat/cpu.h>
-@@ -89,7 +90,7 @@
+@@ -89,7 +90,7 @@ static struct platform_device *smdk2410_
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
@@ -9087,7 +9087,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
&s3c_device_iis,
};
-@@ -102,6 +103,7 @@
+@@ -102,6 +103,7 @@ static void __init smdk2410_map_io(void)
static void __init smdk2410_init(void)
{
@@ -9105,7 +9105,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#include <plat/devs.h>
#include <plat/cpu.h>
-@@ -127,7 +128,7 @@
+@@ -127,7 +128,7 @@ static struct s3c2410_uartcfg tct_hammer
static struct platform_device *tct_hammer_devices[] __initdata = {
&s3c_device_adc,
&s3c_device_wdt,
@@ -9114,7 +9114,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
&s3c_device_usb,
&s3c_device_rtc,
&s3c_device_usbgadget,
-@@ -146,6 +147,7 @@
+@@ -146,6 +147,7 @@ static void __init tct_hammer_map_io(voi
static void __init tct_hammer_init(void)
{
@@ -9132,7 +9132,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#include "usb-simtec.h"
#include "nor-simtec.h"
-@@ -334,7 +335,7 @@
+@@ -334,7 +335,7 @@ static struct platform_device *vr1000_de
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
@@ -9141,7 +9141,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
&s3c_device_adc,
&serial_device,
&vr1000_dm9k0,
-@@ -384,6 +385,7 @@
+@@ -384,6 +385,7 @@ static void __init vr1000_map_io(void)
static void __init vr1000_init(void)
{
@@ -9151,7 +9151,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
i2c_register_board_info(0, vr1000_i2c_devs,
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
-@@ -15,7 +15,8 @@
+@@ -15,7 +15,8 @@ obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o
obj-$(CONFIG_S3C2410_GPIO) += gpio.o
@@ -9161,7 +9161,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
# Machine support
-@@ -38,3 +39,5 @@
+@@ -38,3 +39,5 @@ obj-$(CONFIG_SIMTEC_NOR) += nor-simtec.o
# machine additions
obj-$(CONFIG_MACH_BAST_IDE) += bast-ide.o
@@ -9512,7 +9512,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* Initial IO mappings */
-@@ -59,25 +63,28 @@
+@@ -59,25 +63,28 @@ void __init s3c2410_init_uarts(struct s3
* machine specific initialisation.
*/
@@ -9547,7 +9547,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
tmp = __raw_readl(S3C2410_CLKDIVN);
-@@ -95,7 +102,13 @@
+@@ -95,7 +102,13 @@ void __init s3c2410_init_clocks(int xtal
* console to use them
*/
@@ -9564,7 +9564,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
-@@ -93,12 +93,6 @@
+@@ -93,12 +93,6 @@ static int s3c2412_upll_enable(struct cl
/* clock selections */
@@ -9577,7 +9577,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
static struct clk clk_erefclk = {
.name = "erefclk",
.id = -1,
-@@ -773,5 +767,6 @@
+@@ -773,5 +767,6 @@ int __init s3c2412_baseclk_add(void)
s3c2412_clkcon_enable(clkp, 0);
}
@@ -9625,7 +9625,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
static struct map_desc jive_iodesc[] __initdata = {
};
-@@ -450,14 +451,14 @@
+@@ -450,14 +451,14 @@ static struct spi_board_info __initdata
/* I2C bus and device configuration. */
@@ -9642,7 +9642,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
[0] = {
I2C_BOARD_INFO("lis302dl", 0x1c),
.irq = IRQ_EINT14,
-@@ -470,7 +471,7 @@
+@@ -470,7 +471,7 @@ static struct platform_device *jive_devi
&s3c_device_usb,
&s3c_device_rtc,
&s3c_device_wdt,
@@ -9651,7 +9651,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
&s3c_device_lcd,
&jive_device_lcdspi,
&jive_device_wm8750,
-@@ -492,7 +493,7 @@
+@@ -492,7 +493,7 @@ static int jive_pm_suspend(struct sys_de
* correct address to resume from. */
__raw_writel(0x2BED, S3C2412_INFORM0);
@@ -9660,7 +9660,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
return 0;
}
-@@ -628,7 +629,7 @@
+@@ -628,7 +629,7 @@ static void __init jive_machine_init(voi
/* initialise the power management now we've setup everything. */
@@ -9669,7 +9669,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
s3c_device_nand.dev.platform_data = &jive_nand_info;
-@@ -663,7 +664,7 @@
+@@ -663,7 +664,7 @@ static void __init jive_machine_init(voi
spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs));
@@ -9690,7 +9690,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#include <mach/fb.h>
#include <plat/s3c2410.h>
-@@ -105,7 +106,7 @@
+@@ -105,7 +106,7 @@ static struct platform_device *smdk2413_
&s3c_device_usb,
//&s3c_device_lcd,
&s3c_device_wdt,
@@ -9699,7 +9699,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
&s3c_device_iis,
&s3c_device_usbgadget,
};
-@@ -142,6 +143,7 @@
+@@ -142,6 +143,7 @@ static void __init smdk2413_machine_init
s3c24xx_udc_set_platdata(&smdk2413_udc_cfg);
@@ -9719,7 +9719,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#include <plat/s3c2410.h>
#include <plat/s3c2412.h>
-@@ -122,7 +123,7 @@
+@@ -122,7 +123,7 @@ static struct s3c2410_platform_nand vstm
static struct platform_device *vstms_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_wdt,
@@ -9728,7 +9728,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
&s3c_device_iis,
&s3c_device_rtc,
&s3c_device_nand,
-@@ -151,6 +152,7 @@
+@@ -151,6 +152,7 @@ static void __init vstms_map_io(void)
static void __init vstms_init(void)
{
@@ -9738,7 +9738,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
-@@ -85,7 +85,7 @@
+@@ -85,7 +85,7 @@ static struct sleep_save s3c2412_sleep[]
static int s3c2412_pm_suspend(struct sys_device *dev, pm_message_t state)
{
@@ -9747,7 +9747,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
return 0;
}
-@@ -98,7 +98,7 @@
+@@ -98,7 +98,7 @@ static int s3c2412_pm_resume(struct sys_
tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE;
__raw_writel(tmp, S3C2412_PWRCFG);
@@ -9791,7 +9791,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#ifndef CONFIG_CPU_S3C2412_ONLY
void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
-@@ -136,7 +140,7 @@
+@@ -136,7 +140,7 @@ static void s3c2412_hard_reset(void)
* machine specific initialisation.
*/
@@ -9800,7 +9800,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
{
/* move base of IO */
-@@ -153,20 +157,25 @@
+@@ -153,20 +157,25 @@ void __init s3c2412_map_io(struct map_de
/* register our io-tables */
iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
@@ -9829,7 +9829,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
clk_mpll.rate = fclk;
-@@ -183,11 +192,17 @@
+@@ -183,11 +192,17 @@ void __init s3c2412_init_clocks(int xtal
printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
@@ -9848,7 +9848,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
s3c2412_baseclk_add();
}
-@@ -216,5 +231,8 @@
+@@ -216,5 +231,8 @@ int __init s3c2412_init(void)
{
printk("S3C2412: Initialising architecture\n");
@@ -16112,7 +16112,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+#endif /* _LINUX_FIQ_C_ISR_H */
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
-@@ -22,12 +22,20 @@
+@@ -22,12 +22,20 @@ config S3C2440_DMA
help
Support for S3C2440 specific DMA code5A
@@ -16133,7 +16133,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
select PM_SIMTEC if PM
select HAVE_PATA_PLATFORM
help
-@@ -37,6 +45,7 @@
+@@ -37,6 +45,7 @@ config MACH_ANUBIS
config MACH_OSIRIS
bool "Simtec IM2440D20 (OSIRIS) module"
select CPU_S3C2440
@@ -16141,7 +16141,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
select PM_SIMTEC if PM
help
Say Y here if you are using the Simtec IM2440D20 module, also
-@@ -74,5 +83,30 @@
+@@ -74,5 +83,30 @@ config MACH_AT2440EVB
help
Say Y here if you are using the AT2440EVB development board
@@ -16184,7 +16184,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
-@@ -404,7 +405,7 @@
+@@ -404,7 +405,7 @@ static struct platform_device *anubis_de
&s3c_device_usb,
&s3c_device_wdt,
&s3c_device_adc,
@@ -16193,7 +16193,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
&s3c_device_rtc,
&s3c_device_nand,
&anubis_device_ide0,
-@@ -468,6 +469,7 @@
+@@ -468,6 +469,7 @@ static void __init anubis_map_io(void)
static void __init anubis_init(void)
{
@@ -16213,7 +16213,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
-@@ -166,7 +167,7 @@
+@@ -166,7 +167,7 @@ static struct platform_device *at2440evb
&s3c_device_usb,
&s3c_device_wdt,
&s3c_device_adc,
@@ -16222,7 +16222,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
&s3c_device_rtc,
&s3c_device_nand,
&at2440evb_device_eth,
-@@ -183,6 +184,7 @@
+@@ -183,6 +184,7 @@ static void __init at2440evb_map_io(void
static void __init at2440evb_init(void)
{
@@ -18021,7 +18021,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#include <plat/s3c2410.h>
#include <plat/s3c2440.h>
-@@ -107,7 +108,7 @@
+@@ -107,7 +108,7 @@ static struct platform_device *nexcoder_
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
@@ -18030,7 +18030,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
&s3c_device_iis,
&s3c_device_rtc,
&s3c_device_camif,
-@@ -142,6 +143,7 @@
+@@ -142,6 +143,7 @@ static void __init nexcoder_map_io(void)
static void __init nexcoder_init(void)
{
@@ -18050,7 +18050,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
-@@ -335,7 +336,7 @@
+@@ -335,7 +336,7 @@ static struct i2c_board_info osiris_i2c_
/* Standard Osiris devices */
static struct platform_device *osiris_devices[] __initdata = {
@@ -18059,7 +18059,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
&s3c_device_wdt,
&s3c_device_nand,
&osiris_pcmcia,
-@@ -398,6 +399,8 @@
+@@ -398,6 +399,8 @@ static void __init osiris_init(void)
sysdev_class_register(&osiris_pm_sysclass);
sysdev_register(&osiris_pm_sysdev);
@@ -18079,7 +18079,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#include <mach/fb.h>
#include <plat/clock.h>
-@@ -179,7 +179,7 @@
+@@ -179,7 +179,7 @@ static struct platform_device *rx3715_de
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
@@ -18088,7 +18088,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
&s3c_device_iis,
&s3c_device_nand,
};
-@@ -203,7 +203,7 @@
+@@ -203,7 +203,7 @@ static void __init rx3715_init_machine(v
#ifdef CONFIG_PM_H1940
memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
#endif
@@ -18107,7 +18107,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#include <plat/s3c2410.h>
#include <plat/s3c2440.h>
-@@ -152,7 +153,7 @@
+@@ -152,7 +153,7 @@ static struct platform_device *smdk2440_
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
@@ -18116,7 +18116,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
&s3c_device_iis,
};
-@@ -166,6 +167,7 @@
+@@ -166,6 +167,7 @@ static void __init smdk2440_map_io(void)
static void __init smdk2440_machine_init(void)
{
s3c24xx_fb_set_platdata(&smdk2440_fb_info);
@@ -18126,7 +18126,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
smdk_machine_init();
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
-@@ -13,6 +13,7 @@
+@@ -13,6 +13,7 @@ obj-$(CONFIG_CPU_S3C2440) += s3c2440.o d
obj-$(CONFIG_CPU_S3C2440) += irq.o
obj-$(CONFIG_CPU_S3C2440) += clock.o
obj-$(CONFIG_S3C2440_DMA) += dma.o
@@ -18134,7 +18134,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
# Machine support
-@@ -22,3 +23,6 @@
+@@ -22,3 +23,6 @@ obj-$(CONFIG_MACH_RX3715) += mach-rx3715
obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o
obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
@@ -18143,7 +18143,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
-@@ -46,6 +46,9 @@
+@@ -46,6 +46,9 @@ int __init s3c2440_init(void)
s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
s3c_device_wdt.resource[1].end = IRQ_S3C2440_WDT;
@@ -18178,7 +18178,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
static struct sys_device s3c2442_sysdev = {
.cls = &s3c2442_sysclass,
-@@ -30,5 +31,8 @@
+@@ -30,5 +31,8 @@ int __init s3c2442_init(void)
{
printk("S3C2442: Initialising architecture\n");
@@ -18198,7 +18198,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#include <plat/s3c2443.h>
#include <plat/clock.h>
#include <plat/cpu.h>
-@@ -145,12 +147,6 @@
+@@ -145,12 +147,6 @@ static unsigned long s3c2443_roundrate_c
/* clock selections */
@@ -18211,7 +18211,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
static struct clk clk_mpllref = {
.name = "mpllref",
.parent = &clk_xtal,
-@@ -165,14 +161,6 @@
+@@ -165,14 +161,6 @@ static struct clk clk_mpll = {
};
#endif
@@ -18226,7 +18226,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
static struct clk clk_i2s_ext = {
.name = "i2s-ext",
.id = -1,
-@@ -1011,22 +999,20 @@
+@@ -1011,22 +999,20 @@ static struct clk *clks[] __initdata = {
&clk_prediv,
};
@@ -18255,7 +18255,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
pll = s3c2443_get_mpll(mpllcon, xtal);
clk_msysclk.rate = pll;
-@@ -1036,13 +1022,29 @@
+@@ -1036,13 +1022,29 @@ void __init s3c2443_init_clocks(int xtal
hclk /= s3c2443_get_hdiv(clkdiv0);
pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
@@ -18286,7 +18286,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
s3c2443_clk_initparents();
for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
-@@ -1056,7 +1058,7 @@
+@@ -1056,7 +1058,7 @@ void __init s3c2443_init_clocks(int xtal
}
clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
@@ -18295,7 +18295,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
clk_usb_bus.parent = &clk_usb_bus_host;
/* ensure usb bus clock is within correct rate of 48MHz */
-@@ -1105,4 +1107,6 @@
+@@ -1105,4 +1107,6 @@ void __init s3c2443_init_clocks(int xtal
(clkp->enable)(clkp, 0);
}
@@ -18321,7 +18321,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
[0] = (x) | DMA_CH_VALID, \
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
-@@ -24,6 +24,7 @@
+@@ -24,6 +24,7 @@ config MACH_SMDK2443
bool "SMDK2443"
select CPU_S3C2443
select MACH_SMDK
@@ -18339,7 +18339,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#include <plat/s3c2410.h>
#include <plat/s3c2440.h>
-@@ -103,8 +104,8 @@
+@@ -103,8 +104,8 @@ static struct s3c2410_uartcfg smdk2443_u
static struct platform_device *smdk2443_devices[] __initdata = {
&s3c_device_wdt,
@@ -18350,7 +18350,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
};
static void __init smdk2443_map_io(void)
-@@ -116,6 +117,7 @@
+@@ -116,6 +117,7 @@ static void __init smdk2443_map_io(void)
static void __init smdk2443_machine_init(void)
{
@@ -18360,7 +18360,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
}
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
-@@ -81,10 +81,9 @@
+@@ -81,10 +81,9 @@ void __init s3c2443_init_uarts(struct s3
* machine specific initialisation.
*/
@@ -21366,7 +21366,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+}
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
-@@ -121,7 +121,10 @@
+@@ -121,7 +121,10 @@ endif
machine-$(CONFIG_ARCH_OMAP3) := omap2
plat-$(CONFIG_ARCH_OMAP) := omap
machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
@@ -21379,7 +21379,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
machine-$(CONFIG_ARCH_IMX) := imx
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
-@@ -183,14 +183,14 @@
+@@ -183,14 +183,14 @@ config CPU_ARM926T
depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || \
MACH_VERSATILE_AB || ARCH_OMAP730 || \
ARCH_OMAP16XX || MACH_REALVIEW_EB || \
@@ -21396,7 +21396,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || \
ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || \
ARCH_AT91SAM9G20 || ARCH_AT91CAP9 || \
-@@ -400,9 +400,10 @@
+@@ -400,9 +400,10 @@ config CPU_FEROCEON_OLD_ID
# ARMv6
config CPU_V6
bool "Support ARM V6 processor"
@@ -24626,7 +24626,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#ifndef __ASSEMBLY__
/* struct s3c24xx_uart_clksrc
-@@ -224,7 +243,7 @@
+@@ -224,7 +243,7 @@ struct s3c2410_uartcfg {
* or platform_add_device() before the console_initcall()
*/
@@ -24830,7 +24830,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+#endif /* __PLAT_S3C_SDHCI_H */
--- a/arch/arm/plat-s3c/include/plat/uncompress.h
+++ b/arch/arm/plat-s3c/include/plat/uncompress.h
-@@ -28,7 +28,7 @@
+@@ -28,7 +28,7 @@ static void arch_detect_cpu(void);
/* defines for UART registers */
#include <plat/regs-serial.h>
@@ -24839,7 +24839,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* working in physical space... */
#undef S3C2410_WDOGREG
-@@ -37,7 +37,7 @@
+@@ -37,7 +37,7 @@ static void arch_detect_cpu(void);
/* how many bytes we allow into the FIFO at a time in FIFO mode */
#define FIFO_MAX (14)
@@ -24848,7 +24848,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
static __inline__ void
uart_wr(unsigned int reg, unsigned int val)
-@@ -139,6 +139,28 @@
+@@ -139,6 +139,28 @@ static void arch_decomp_error(const char
static void error(char *err);
@@ -24877,7 +24877,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
static void
arch_decomp_setup(void)
{
-@@ -149,6 +171,12 @@
+@@ -149,6 +171,12 @@ arch_decomp_setup(void)
arch_detect_cpu();
arch_decomp_wdog_start();
@@ -25067,7 +25067,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
select NO_IOPORT
help
Base platform code for any Samsung S3C device
-@@ -16,24 +16,24 @@
+@@ -16,24 +16,24 @@ config PLAT_S3C
config CPU_LLSERIAL_S3C2410_ONLY
bool
@@ -25096,7 +25096,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
help
Selected if there is an S3C2440 (or register compatible) serial
low-level implementation needed
-@@ -57,6 +57,14 @@
+@@ -57,6 +57,14 @@ config S3C_BOOT_ERROR_RESET
Say y here to use the watchdog to reset the system if the
kernel decompressor detects an error during decompression.
@@ -25111,7 +25111,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
comment "Power management"
config S3C2410_PM_DEBUG
-@@ -67,6 +75,15 @@
+@@ -67,6 +75,15 @@ config S3C2410_PM_DEBUG
Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
for more information.
@@ -25127,7 +25127,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
config S3C2410_PM_CHECK
bool "S3C2410 PM Suspend Memory CRC"
depends on PLAT_S3C && PM && CRC32
-@@ -102,3 +119,73 @@
+@@ -102,3 +119,73 @@ config S3C_LOWLEVEL_UART_PORT
such as the `Uncompressing...` at start time. The value of
this configuration should be between zero and two. The port
must have been initialised by the boot-loader before use.
@@ -27737,7 +27737,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#include <plat/common-smdk.h>
#include <plat/devs.h>
-@@ -201,5 +201,5 @@
+@@ -201,5 +201,5 @@ void __init smdk_machine_init(void)
platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
@@ -27763,7 +27763,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* table of supported CPUs */
static const char name_s3c2400[] = "S3C2400";
-@@ -72,6 +62,7 @@
+@@ -72,6 +62,7 @@ static const char name_s3c2410[] = "S3C
static const char name_s3c2412[] = "S3C2412";
static const char name_s3c2440[] = "S3C2440";
static const char name_s3c2442[] = "S3C2442";
@@ -27771,7 +27771,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
static const char name_s3c2443[] = "S3C2443";
static const char name_s3c2410a[] = "S3C2410A";
static const char name_s3c2440a[] = "S3C2440A";
-@@ -123,6 +114,15 @@
+@@ -123,6 +114,15 @@ static struct cpu_table cpu_ids[] __init
.name = name_s3c2442
},
{
@@ -27787,7 +27787,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
.idcode = 0x32412001,
.idmask = 0xffffffff,
.map_io = s3c2412_map_io,
-@@ -169,23 +169,7 @@
+@@ -169,23 +169,7 @@ static struct map_desc s3c_iodesc[] __in
IODESC_ENT(UART)
};
@@ -27812,7 +27812,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
static unsigned long s3c24xx_read_idcode_v5(void)
{
-@@ -231,6 +215,7 @@
+@@ -231,6 +215,7 @@ void __init s3c24xx_init_io(struct map_d
unsigned long idcode = 0x0;
/* initialise the io descriptors we need for initialisation */
@@ -27820,7 +27820,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
if (cpu_architecture() >= CPU_ARCH_ARMv5) {
-@@ -239,117 +224,7 @@
+@@ -239,117 +224,7 @@ void __init s3c24xx_init_io(struct map_d
idcode = s3c24xx_read_idcode_v4();
}
@@ -27960,7 +27960,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* Serial port registrations */
-@@ -76,6 +78,19 @@
+@@ -76,6 +78,19 @@ static struct resource s3c2410_uart2_res
}
};
@@ -27980,7 +27980,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
[0] = {
.resources = s3c2410_uart0_resource,
-@@ -89,6 +104,10 @@
+@@ -89,6 +104,10 @@ struct s3c24xx_uart_resources s3c2410_ua
.resources = s3c2410_uart2_resource,
.nr_resources = ARRAY_SIZE(s3c2410_uart2_resource),
},
@@ -27991,7 +27991,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
};
/* yart devices */
-@@ -105,13 +124,18 @@
+@@ -105,13 +124,18 @@ static struct platform_device s3c24xx_ua
.id = 2,
};
@@ -28012,7 +28012,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
};
/* USB Host Controller */
-@@ -192,8 +216,8 @@
+@@ -192,8 +216,8 @@ void __init s3c24xx_fb_set_platdata(stru
static struct resource s3c_nand_resource[] = {
[0] = {
@@ -28023,7 +28023,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
.flags = IORESOURCE_MEM,
}
};
-@@ -207,6 +231,23 @@
+@@ -207,6 +231,23 @@ struct platform_device s3c_device_nand =
EXPORT_SYMBOL(s3c_device_nand);
@@ -28047,7 +28047,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* USB Device (Gadget)*/
static struct resource s3c_usbgadget_resource[] = {
-@@ -271,31 +312,6 @@
+@@ -271,31 +312,6 @@ struct platform_device s3c_device_wdt =
EXPORT_SYMBOL(s3c_device_wdt);
@@ -28079,7 +28079,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* IIS */
static struct resource s3c_iis_resource[] = {
-@@ -382,8 +398,8 @@
+@@ -382,8 +398,8 @@ struct platform_device s3c_device_adc =
static struct resource s3c_sdi_resource[] = {
[0] = {
@@ -28090,7 +28090,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
.flags = IORESOURCE_MEM,
},
[1] = {
-@@ -403,36 +419,6 @@
+@@ -403,36 +419,6 @@ struct platform_device s3c_device_sdi =
EXPORT_SYMBOL(s3c_device_sdi);
@@ -28137,7 +28137,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function)
{
-@@ -215,3 +216,423 @@
+@@ -215,3 +216,423 @@ int s3c2410_gpio_irq2pin(unsigned int ir
}
EXPORT_SYMBOL(s3c2410_gpio_irq2pin);
@@ -28670,7 +28670,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
{
return -EINVAL;
-@@ -125,7 +34,7 @@
+@@ -125,7 +34,7 @@ static int s3c24xx_gpiolib_banka_input(s
static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
unsigned offset, int value)
{
@@ -28679,7 +28679,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
void __iomem *base = ourchip->base;
unsigned long flags;
unsigned long dat;
-@@ -151,9 +60,10 @@
+@@ -151,9 +60,10 @@ static int s3c24xx_gpiolib_banka_output(
return 0;
}
@@ -28691,7 +28691,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
.chip = {
.base = S3C2410_GPA0,
.owner = THIS_MODULE,
-@@ -161,97 +71,87 @@
+@@ -161,97 +71,87 @@ static struct s3c24xx_gpio_chip gpios[]
.ngpio = 24,
.direction_input = s3c24xx_gpiolib_banka_input,
.direction_output = s3c24xx_gpiolib_banka_output,
@@ -29222,7 +29222,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#define irqdbf(x...)
#define irqdbf2(x...)
-@@ -25,8 +31,15 @@
+@@ -25,8 +31,15 @@ s3c_irqsub_mask(unsigned int irqno, unsi
{
unsigned long mask;
unsigned long submask;
@@ -29238,7 +29238,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
mask = __raw_readl(S3C2410_INTMSK);
submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
-@@ -39,6 +52,9 @@
+@@ -39,6 +52,9 @@ s3c_irqsub_mask(unsigned int irqno, unsi
/* write back masks */
__raw_writel(submask, S3C2410_INTSUBMSK);
@@ -29248,7 +29248,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
}
-@@ -47,8 +63,15 @@
+@@ -47,8 +63,15 @@ s3c_irqsub_unmask(unsigned int irqno, un
{
unsigned long mask;
unsigned long submask;
@@ -29264,7 +29264,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
mask = __raw_readl(S3C2410_INTMSK);
submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
-@@ -57,6 +80,9 @@
+@@ -57,6 +80,9 @@ s3c_irqsub_unmask(unsigned int irqno, un
/* write back masks */
__raw_writel(submask, S3C2410_INTSUBMSK);
__raw_writel(mask, S3C2410_INTMSK);
@@ -29855,7 +29855,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h
-@@ -16,7 +16,7 @@
+@@ -16,7 +16,7 @@ struct s3c2410_uartcfg;
extern int s3c2443_init(void);
@@ -30054,7 +30054,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
}
static inline void
-@@ -155,9 +67,19 @@
+@@ -155,9 +67,19 @@ s3c_irq_maskack(unsigned int irqno)
{
unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
unsigned long mask;
@@ -30074,7 +30074,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
__raw_writel(bitval, S3C2410_SRCPND);
__raw_writel(bitval, S3C2410_INTPND);
-@@ -168,15 +90,25 @@
+@@ -168,15 +90,25 @@ static void
s3c_irq_unmask(unsigned int irqno)
{
unsigned long mask;
@@ -30100,7 +30100,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
}
struct irq_chip s3c_irq_level_chip = {
-@@ -589,59 +521,6 @@
+@@ -589,59 +521,6 @@ s3c_irq_demux_extint4t7(unsigned int irq
}
}
@@ -30160,7 +30160,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* s3c24xx_init_irq
*
* Initialise S3C2410 IRQ system
-@@ -672,26 +551,26 @@
+@@ -672,26 +551,26 @@ void __init s3c24xx_init_irq(void)
last = 0;
for (i = 0; i < 4; i++) {
@@ -30353,7 +30353,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
help
Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
-@@ -49,9 +63,31 @@
+@@ -49,9 +63,31 @@ config S3C2410_DMA_DEBUG
Enable debugging output for the DMA code. This option sends info
to the kernel log, at priority KERN_DEBUG.
@@ -30387,7 +30387,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
endif
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
-@@ -17,9 +17,8 @@
+@@ -17,9 +17,8 @@ obj-y += irq.o
obj-y += devs.o
obj-y += gpio.o
obj-y += gpiolib.o
@@ -30398,7 +30398,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
# Architecture dependant builds
-@@ -28,7 +27,26 @@
+@@ -28,7 +27,26 @@ obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq
obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o
obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
obj-$(CONFIG_PM) += pm.o
@@ -31940,7 +31940,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#define PFX "s3c24xx-pm: "
static struct sleep_save core_save[] = {
-@@ -76,371 +67,26 @@
+@@ -76,371 +67,26 @@ static struct sleep_save core_save[] = {
SAVE_ITEM(S3C2410_BANKCON4),
SAVE_ITEM(S3C2410_BANKCON5),
@@ -32317,7 +32317,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
{
unsigned long irqstate;
unsigned long pinstate;
-@@ -455,21 +101,21 @@
+@@ -455,21 +101,21 @@ static void s3c2410_pm_check_resume_pin(
if (!irqstate) {
if (pinstate == S3C2410_GPIO_IRQ)
@@ -32343,7 +32343,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
{
int pin;
-@@ -479,336 +125,24 @@
+@@ -479,336 +125,24 @@ static void s3c2410_pm_configure_extint(
*/
for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
@@ -32690,7 +32690,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
-}
--- a/arch/arm/plat-s3c24xx/pm-simtec.c
+++ b/arch/arm/plat-s3c24xx/pm-simtec.c
-@@ -61,7 +61,7 @@
+@@ -61,7 +61,7 @@ static __init int pm_simtec_init(void)
__raw_writel(gstatus4, S3C2410_GSTATUS4);
@@ -33014,7 +33014,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
static struct map_desc s3c244x_iodesc[] __initdata = {
IODESC_ENT(CLKPWR),
-@@ -56,32 +59,37 @@
+@@ -56,32 +59,37 @@ void __init s3c244x_init_uarts(struct s3
s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
}
@@ -33059,7 +33059,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
clkdiv = __raw_readl(S3C2410_CLKDIVN);
camdiv = __raw_readl(S3C2440_CAMDIVN);
-@@ -107,18 +115,24 @@
+@@ -107,18 +115,24 @@ void __init s3c244x_init_clocks(int xtal
}
hclk = fclk / hdiv;
@@ -33086,7 +33086,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
s3c2410_baseclk_add();
}
-@@ -134,13 +148,13 @@
+@@ -134,13 +148,13 @@ static struct sleep_save s3c244x_sleep[]
static int s3c244x_suspend(struct sys_device *dev, pm_message_t state)
{
@@ -33112,7 +33112,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#include <linux/clk.h>
#include <linux/io.h>
-@@ -102,13 +101,13 @@
+@@ -102,13 +101,13 @@ static int s3c244x_clk_add(struct sys_de
if (clk_get_rate(clock_upll) > (94 * MHZ)) {
clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
@@ -33187,7 +33187,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
stmfd sp!, { r4 - r12, lr }
@@ store co-processor registers
-@@ -84,7 +84,7 @@
+@@ -84,7 +84,7 @@ resume_with_mmu:
.ltorg
@@ the next bits sit in the .data segment, even though they
@@ -33196,7 +33196,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
@@ accessed by the resume code before it can restore the MMU.
@@ This means that the variable has to be close enough for the
@@ code to read it... since the .text segment needs to be RO,
-@@ -92,19 +92,19 @@
+@@ -92,19 +92,19 @@ resume_with_mmu:
.data
@@ -33220,7 +33220,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
*
* resume code entry for bootloader to call
*
-@@ -113,7 +113,7 @@
+@@ -113,7 +113,7 @@ s3c2410_sleep_save_phys:
* must not write to the code segment (code is read-only)
*/
@@ -33229,7 +33229,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
msr cpsr_c, r0
-@@ -145,7 +145,7 @@
+@@ -145,7 +145,7 @@ ENTRY(s3c2410_cpu_resume)
mcr p15, 0, r1, c8, c7, 0 @@ invalidate I & D TLBs
mcr p15, 0, r1, c7, c7, 0 @@ invalidate I & D caches
@@ -33361,7 +33361,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#define TIMER_USEC_SHIFT 16
-@@ -177,11 +183,7 @@
+@@ -177,11 +183,7 @@ static void s3c2410_timer_setup (void)
tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1;
} else {
@@ -33374,7 +33374,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
* 70MHz are not values we can directly generate the timer
* value from, we need to pre-scale and divide before using it.
*
-@@ -189,19 +191,9 @@
+@@ -189,19 +191,9 @@ static void s3c2410_timer_setup (void)
* (8.45 ticks per usec)
*/
@@ -33395,7 +33395,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
tcfg1 |= S3C2410_TCFG1_MUX4_DIV2;
-@@ -245,16 +237,244 @@
+@@ -245,16 +237,244 @@ static void s3c2410_timer_setup (void)
tcon |= S3C2410_TCON_T4START;
tcon &= ~S3C2410_TCON_T4MANUALUPD;
__raw_writel(tcon, S3C2410_TCON);
@@ -38455,7 +38455,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+
--- a/Documentation/arm/Samsung-S3C24XX/Suspend.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Suspend.txt
-@@ -40,13 +40,13 @@
+@@ -40,13 +40,13 @@ Resuming
Machine Support
---------------
@@ -38472,7 +38472,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
needs to setup anything else for power management support.
There is currently no support for over-riding the default method of
-@@ -74,7 +74,7 @@
+@@ -74,7 +74,7 @@ statuc void __init machine_init(void)
enable_irq_wake(IRQ_EINT0);
@@ -78733,7 +78733,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+#endif /* _WMI_HOST_H_ */
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
-@@ -141,6 +141,29 @@
+@@ -141,6 +141,29 @@ void bus_remove_file(struct bus_type *bu
}
EXPORT_SYMBOL_GPL(bus_remove_file);
@@ -78765,7 +78765,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
};
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
-@@ -55,6 +55,11 @@
+@@ -55,6 +55,11 @@ static inline int device_is_not_partitio
*/
const char *dev_driver_string(const struct device *dev)
{
@@ -78779,7 +78779,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
(dev->class ? dev->class->name : ""));
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
-@@ -69,9 +69,9 @@
+@@ -69,9 +69,9 @@ void device_pm_unlock(void)
*/
void device_pm_add(struct device *dev)
{
@@ -78793,7 +78793,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
if (dev->parent->power.status >= DPM_SUSPENDING)
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
-@@ -66,6 +66,18 @@
+@@ -66,6 +66,18 @@ config VT_CONSOLE
If unsure, say Y.
@@ -78844,7 +78844,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* i2c controller state */
-@@ -64,6 +62,7 @@
+@@ -64,6 +62,7 @@ struct s3c24xx_i2c {
unsigned int msg_ptr;
unsigned int tx_setup;
@@ -78852,7 +78852,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
enum s3c24xx_i2c_state state;
unsigned long clkrate;
-@@ -71,7 +70,6 @@
+@@ -71,7 +70,6 @@ struct s3c24xx_i2c {
void __iomem *regs;
struct clk *clk;
struct device *dev;
@@ -78860,7 +78860,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
struct resource *ioarea;
struct i2c_adapter adap;
-@@ -80,16 +78,7 @@
+@@ -80,16 +78,7 @@ struct s3c24xx_i2c {
#endif
};
@@ -78878,7 +78878,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* s3c24xx_i2c_is2440()
*
-@@ -103,21 +92,6 @@
+@@ -103,21 +92,6 @@ static inline int s3c24xx_i2c_is2440(str
return !strcmp(pdev->name, "s3c2440-i2c");
}
@@ -78900,7 +78900,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* s3c24xx_i2c_master_complete
*
* complete the message and wake up the caller, using the given return code,
-@@ -130,7 +104,7 @@
+@@ -130,7 +104,7 @@ static inline void s3c24xx_i2c_master_co
i2c->msg_ptr = 0;
i2c->msg = NULL;
@@ -78909,7 +78909,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
i2c->msg_num = 0;
if (ret)
i2c->msg_idx = ret;
-@@ -141,19 +115,17 @@
+@@ -141,19 +115,17 @@ static inline void s3c24xx_i2c_master_co
static inline void s3c24xx_i2c_disable_ack(struct s3c24xx_i2c *i2c)
{
unsigned long tmp;
@@ -78931,7 +78931,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
}
/* irq enable/disable functions */
-@@ -161,15 +133,23 @@
+@@ -161,15 +133,23 @@ static inline void s3c24xx_i2c_enable_ac
static inline void s3c24xx_i2c_disable_irq(struct s3c24xx_i2c *i2c)
{
unsigned long tmp;
@@ -78957,7 +78957,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
tmp = readl(i2c->regs + S3C2410_IICCON);
writel(tmp | S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON);
}
-@@ -177,10 +157,10 @@
+@@ -177,10 +157,10 @@ static inline void s3c24xx_i2c_enable_ir
/* s3c24xx_i2c_message_start
*
@@ -78970,7 +78970,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
struct i2c_msg *msg)
{
unsigned int addr = (msg->addr & 0x7f) << 1;
-@@ -199,15 +179,15 @@
+@@ -199,15 +179,15 @@ static void s3c24xx_i2c_message_start(st
if (msg->flags & I2C_M_REV_DIR_ADDR)
addr ^= 1;
@@ -78989,7 +78989,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* delay here to ensure the data byte has gotten onto the bus
* before the transaction is started */
-@@ -215,8 +195,8 @@
+@@ -215,8 +195,8 @@ static void s3c24xx_i2c_message_start(st
dev_dbg(i2c->dev, "iiccon, %08lx\n", iiccon);
writel(iiccon, i2c->regs + S3C2410_IICCON);
@@ -79000,7 +79000,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
writel(stat, i2c->regs + S3C2410_IICSTAT);
}
-@@ -227,11 +207,11 @@
+@@ -227,11 +207,11 @@ static inline void s3c24xx_i2c_stop(stru
dev_dbg(i2c->dev, "STOP\n");
/* stop the transfer */
@@ -79015,7 +79015,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
s3c24xx_i2c_master_complete(i2c, ret);
s3c24xx_i2c_disable_irq(i2c);
}
-@@ -241,7 +221,7 @@
+@@ -241,7 +221,7 @@ static inline void s3c24xx_i2c_stop(stru
/* is_lastmsg()
*
@@ -79024,7 +79024,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
*/
static inline int is_lastmsg(struct s3c24xx_i2c *i2c)
-@@ -289,14 +269,14 @@
+@@ -289,14 +269,14 @@ static int i2s_s3c_irq_nextbyte(struct s
case STATE_STOP:
dev_err(i2c->dev, "%s: called in STATE_STOP\n", __func__);
@@ -79041,7 +79041,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
if (iicstat & S3C2410_IICSTAT_LASTBIT &&
!(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
/* ack was not received... */
-@@ -322,7 +302,7 @@
+@@ -322,7 +302,7 @@ static int i2s_s3c_irq_nextbyte(struct s
if (i2c->state == STATE_READ)
goto prepare_read;
@@ -79050,7 +79050,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
* send a byte as well */
case STATE_WRITE:
-@@ -339,7 +319,7 @@
+@@ -339,7 +319,7 @@ static int i2s_s3c_irq_nextbyte(struct s
}
}
@@ -79059,7 +79059,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
if (!is_msgend(i2c)) {
byte = i2c->msg->buf[i2c->msg_ptr++];
-@@ -359,9 +339,9 @@
+@@ -359,9 +339,9 @@ static int i2s_s3c_irq_nextbyte(struct s
dev_dbg(i2c->dev, "WRITE: Next Message\n");
i2c->msg_ptr = 0;
@@ -79071,7 +79071,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* check to see if we need to do another message */
if (i2c->msg->flags & I2C_M_NOSTART) {
-@@ -375,7 +355,6 @@
+@@ -375,7 +355,6 @@ static int i2s_s3c_irq_nextbyte(struct s
goto retry_write;
} else {
@@ -79079,7 +79079,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* send the new start */
s3c24xx_i2c_message_start(i2c, i2c->msg);
i2c->state = STATE_START;
-@@ -389,7 +368,7 @@
+@@ -389,7 +368,7 @@ static int i2s_s3c_irq_nextbyte(struct s
break;
case STATE_READ:
@@ -79088,7 +79088,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
* something with it, and then work out wether we are
* going to do any more read/write
*/
-@@ -397,13 +376,13 @@
+@@ -397,13 +376,13 @@ static int i2s_s3c_irq_nextbyte(struct s
byte = readb(i2c->regs + S3C2410_IICDS);
i2c->msg->buf[i2c->msg_ptr++] = byte;
@@ -79104,7 +79104,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
} else if (is_msgend(i2c)) {
/* ok, we've read the entire buffer, see if there
* is anything else we need to do */
-@@ -429,7 +408,7 @@
+@@ -429,7 +408,7 @@ static int i2s_s3c_irq_nextbyte(struct s
/* acknowlegde the IRQ and get back on with the work */
out_ack:
@@ -79113,7 +79113,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
tmp &= ~S3C2410_IICCON_IRQPEND;
writel(tmp, i2c->regs + S3C2410_IICCON);
out:
-@@ -450,19 +429,19 @@
+@@ -450,19 +429,19 @@ static irqreturn_t s3c24xx_i2c_irq(int i
status = readl(i2c->regs + S3C2410_IICSTAT);
if (status & S3C2410_IICSTAT_ARBITR) {
@@ -79136,7 +79136,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* pretty much this leaves us with the fact that we've
* transmitted or received whatever byte we last sent */
-@@ -485,16 +464,13 @@
+@@ -485,16 +464,13 @@ static int s3c24xx_i2c_set_master(struct
while (timeout-- > 0) {
iicstat = readl(i2c->regs + S3C2410_IICSTAT);
@@ -79154,7 +79154,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
return -ETIMEDOUT;
}
-@@ -503,7 +479,8 @@
+@@ -503,7 +479,8 @@ static int s3c24xx_i2c_set_master(struct
* this starts an i2c transfer
*/
@@ -79164,7 +79164,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
{
unsigned long timeout;
int ret;
-@@ -511,6 +488,15 @@
+@@ -511,6 +488,15 @@ static int s3c24xx_i2c_doxfer(struct s3c
if (i2c->suspended)
return -EIO;
@@ -79180,7 +79180,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
ret = s3c24xx_i2c_set_master(i2c);
if (ret != 0) {
dev_err(i2c->dev, "cannot get bus (error %d)\n", ret);
-@@ -529,12 +515,12 @@
+@@ -529,12 +515,12 @@ static int s3c24xx_i2c_doxfer(struct s3c
s3c24xx_i2c_enable_irq(i2c);
s3c24xx_i2c_message_start(i2c, msgs);
spin_unlock_irq(&i2c->lock);
@@ -79195,7 +79195,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
* noisy when doing an i2cdetect */
if (timeout == 0)
-@@ -591,19 +577,6 @@
+@@ -591,19 +577,6 @@ static const struct i2c_algorithm s3c24x
.functionality = s3c24xx_i2c_func,
};
@@ -79215,7 +79215,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* s3c24xx_i2c_calcdivisor
*
* return the divisor settings for a given frequency
-@@ -643,7 +616,7 @@
+@@ -643,7 +616,7 @@ static inline int freq_acceptable(unsign
{
int diff = freq - wanted;
@@ -79224,7 +79224,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
}
/* s3c24xx_i2c_clockrate
-@@ -655,7 +628,7 @@
+@@ -655,7 +628,7 @@ static inline int freq_acceptable(unsign
static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
{
@@ -79233,7 +79233,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
unsigned long clkin = clk_get_rate(i2c->clk);
unsigned int divs, div1;
u32 iiccon;
-@@ -663,10 +636,8 @@
+@@ -663,10 +636,8 @@ static int s3c24xx_i2c_clockrate(struct
int start, end;
i2c->clkrate = clkin;
@@ -79245,7 +79245,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
dev_dbg(i2c->dev, "pdata %p, freq %lu %lu..%lu\n",
pdata, pdata->bus_freq, pdata->min_freq, pdata->max_freq);
-@@ -774,7 +745,7 @@
+@@ -774,7 +745,7 @@ static inline void s3c24xx_i2c_deregiste
/* s3c24xx_i2c_init
*
@@ -79254,7 +79254,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
*/
static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
-@@ -785,15 +756,15 @@
+@@ -785,15 +756,15 @@ static int s3c24xx_i2c_init(struct s3c24
/* get the plafrom data */
@@ -79274,7 +79274,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
writeb(pdata->slave_addr, i2c->regs + S3C2410_IICADD);
dev_info(i2c->dev, "slave address 0x%02x\n", pdata->slave_addr);
-@@ -831,12 +802,32 @@
+@@ -831,12 +802,32 @@ static int s3c24xx_i2c_init(struct s3c24
static int s3c24xx_i2c_probe(struct platform_device *pdev)
{
@@ -79309,7 +79309,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* find the clock and enable it */
-@@ -878,7 +869,8 @@
+@@ -878,7 +869,8 @@ static int s3c24xx_i2c_probe(struct plat
goto err_ioarea;
}
@@ -79319,7 +79319,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* setup info block for the i2c core */
-@@ -892,29 +884,23 @@
+@@ -892,29 +884,23 @@ static int s3c24xx_i2c_probe(struct plat
goto err_iomap;
/* find the IRQ for this unit (note, this relies on the init call to
@@ -79355,7 +79355,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
ret = s3c24xx_i2c_register_cpufreq(i2c);
if (ret < 0) {
dev_err(&pdev->dev, "failed to register cpufreq notifier\n");
-@@ -944,7 +930,7 @@
+@@ -944,7 +930,7 @@ static int s3c24xx_i2c_probe(struct plat
s3c24xx_i2c_deregister_cpufreq(i2c);
err_irq:
@@ -79364,7 +79364,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
err_iomap:
iounmap(i2c->regs);
-@@ -958,6 +944,7 @@
+@@ -958,6 +944,7 @@ static int s3c24xx_i2c_probe(struct plat
clk_put(i2c->clk);
err_noclk:
@@ -79372,7 +79372,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
return ret;
}
-@@ -973,7 +960,7 @@
+@@ -973,7 +960,7 @@ static int s3c24xx_i2c_remove(struct pla
s3c24xx_i2c_deregister_cpufreq(i2c);
i2c_del_adapter(&i2c->adap);
@@ -79381,7 +79381,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
clk_disable(i2c->clk);
clk_put(i2c->clk);
-@@ -982,6 +969,7 @@
+@@ -982,6 +969,7 @@ static int s3c24xx_i2c_remove(struct pla
release_resource(i2c->ioarea);
kfree(i2c->ioarea);
@@ -79391,7 +79391,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
}
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
-@@ -455,11 +455,12 @@
+@@ -455,11 +455,12 @@ config I2C_PXA_SLAVE
I2C bus.
config I2C_S3C2410
@@ -79409,7 +79409,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
tristate "Renesas SH7760 I2C Controller"
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
-@@ -53,6 +53,26 @@
+@@ -53,6 +53,26 @@ config SENSORS_EEPROM
This driver can also be built as a module. If so, the module
will be called eeprom.
@@ -79436,7 +79436,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
config SENSORS_PCF8574
tristate "Philips PCF8574 and PCF8574A (DEPRECATED)"
depends on EXPERIMENTAL && GPIO_PCF857X = "n"
-@@ -185,4 +205,23 @@
+@@ -185,4 +205,23 @@ config MCU_MPC8349EMITX
also register MCU GPIOs with the generic GPIO API, so you'll able
to use MCU pins as GPIOs.
@@ -79462,7 +79462,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
endmenu
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
-@@ -15,6 +15,8 @@
+@@ -15,6 +15,8 @@ obj-$(CONFIG_AT24) += at24.o
obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o
obj-$(CONFIG_SENSORS_MAX6875) += max6875.o
obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o
@@ -79471,7 +79471,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o
obj-$(CONFIG_PCF8575) += pcf8575.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
-@@ -23,6 +25,8 @@
+@@ -23,6 +25,8 @@ obj-$(CONFIG_TPS65010) += tps65010.o
obj-$(CONFIG_MENELAUS) += menelaus.o
obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o
@@ -84455,7 +84455,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* ------------------------------------------------------------------------- */
/* Copyright (C) 1995-99 Simon G. Vogl
-@@ -158,10 +157,16 @@
+@@ -158,10 +157,16 @@ static int i2c_device_suspend(struct dev
if (!dev->driver)
return 0;
@@ -84472,7 +84472,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
}
static int i2c_device_resume(struct device * dev)
-@@ -170,10 +175,16 @@
+@@ -170,10 +175,16 @@ static int i2c_device_resume(struct devi
if (!dev->driver)
return 0;
@@ -84489,7 +84489,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
}
static void i2c_client_release(struct device *dev)
-@@ -1129,11 +1140,11 @@
+@@ -1129,11 +1140,11 @@ static int i2c_probe_address(struct i2c_
int err;
/* Make sure the address is valid */
@@ -84516,7 +84516,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
struct gpio_keys_button *button;
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
-@@ -323,4 +323,21 @@
+@@ -323,4 +323,21 @@ config KEYBOARD_SH_KEYSC
To compile this driver as a module, choose M here: the
module will be called sh_keysc.
@@ -84540,7 +84540,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
endif
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
-@@ -14,6 +14,8 @@
+@@ -14,6 +14,8 @@ obj-$(CONFIG_KEYBOARD_LOCOMO) += locomo
obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o
obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o
@@ -85253,7 +85253,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+MODULE_LICENSE("GPL");
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
-@@ -236,4 +236,25 @@
+@@ -236,4 +236,25 @@ config INPUT_GPIO_BUTTONS
To compile this driver as a module, choose M here: the
module will be called gpio-buttons.
@@ -86158,7 +86158,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+module_exit(lis302dl_exit);
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
-@@ -22,3 +22,6 @@
+@@ -22,3 +22,6 @@ obj-$(CONFIG_INPUT_UINPUT) += uinput.o
obj-$(CONFIG_INPUT_APANEL) += apanel.o
obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
obj-$(CONFIG_INPUT_GPIO_BUTTONS) += gpio_buttons.o
@@ -86419,7 +86419,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+MODULE_ALIAS("platform:pcf50633-input");
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
-@@ -1016,6 +1016,7 @@
+@@ -1016,6 +1016,7 @@ static const struct input_device_id mous
.evbit = { BIT_MASK(EV_KEY) | BIT_MASK(EV_REL) },
.relbit = { BIT_MASK(REL_WHEEL) },
}, /* A separate scrollwheel */
@@ -86427,7 +86427,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
{
.flags = INPUT_DEVICE_ID_MATCH_EVBIT |
INPUT_DEVICE_ID_MATCH_KEYBIT |
-@@ -1025,6 +1026,7 @@
+@@ -1025,6 +1026,7 @@ static const struct input_device_id mous
.absbit = { BIT_MASK(ABS_X) | BIT_MASK(ABS_Y) },
}, /* A tablet like device, at least touch detection,
two absolute axes */
@@ -86437,7 +86437,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
INPUT_DEVICE_ID_MATCH_KEYBIT |
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
-@@ -11,6 +11,50 @@
+@@ -11,6 +11,50 @@ menuconfig INPUT_TOUCHSCREEN
if INPUT_TOUCHSCREEN
@@ -86488,7 +86488,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
config TOUCHSCREEN_ADS7846
tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
depends on SPI_MASTER
-@@ -71,6 +115,25 @@
+@@ -71,6 +115,25 @@ config TOUCHSCREEN_FUJITSU
To compile this driver as a module, choose M here: the
module will be called fujitsu-ts.
@@ -86514,7 +86514,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
config TOUCHSCREEN_GUNZE
tristate "Gunze AHL-51S touchscreen"
select SERIO
-@@ -376,4 +439,15 @@
+@@ -376,4 +439,15 @@ config TOUCHSCREEN_TOUCHIT213
To compile this driver as a module, choose M here: the
module will be called touchit213.
@@ -86532,7 +86532,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
-@@ -31,3 +31,10 @@
+@@ -31,3 +31,10 @@ wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705) +
wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712) += wm9712.o
wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713) += wm9713.o
obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o
@@ -88029,7 +88029,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+};
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
-@@ -107,4 +107,6 @@
+@@ -107,4 +107,6 @@ source "drivers/uio/Kconfig"
source "drivers/xen/Kconfig"
source "drivers/staging/Kconfig"
@@ -88038,7 +88038,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
endmenu
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
-@@ -33,7 +33,7 @@
+@@ -33,7 +33,7 @@ config LEDS_LOCOMO
config LEDS_S3C24XX
tristate "LED Support for Samsung S3C24XX GPIO LEDs"
@@ -88047,7 +88047,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
help
This option enables support for LEDs connected to GPIO lines
on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.
-@@ -171,6 +171,18 @@
+@@ -171,6 +171,18 @@ config LEDS_DA903X
This option enables support for on-chip LED drivers found
on Dialog Semiconductor DA9030/DA9034 PMICs.
@@ -88068,7 +88068,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
config LEDS_TRIGGERS
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
-@@ -56,8 +56,10 @@
+@@ -56,8 +56,10 @@ static ssize_t led_brightness_store(stru
if (count == size) {
ret = count;
@@ -88475,7 +88475,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+MODULE_LICENSE("GPL");
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
-@@ -24,6 +24,8 @@
+@@ -24,6 +24,8 @@ obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o
obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o
obj-$(CONFIG_LEDS_HP_DISK) += leds-hp-disk.o
@@ -88486,7 +88486,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
--- a/drivers/Makefile
+++ b/drivers/Makefile
-@@ -86,6 +86,7 @@
+@@ -86,6 +86,7 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle/
obj-y += idle/
obj-$(CONFIG_MMC) += mmc/
obj-$(CONFIG_MEMSTICK) += memstick/
@@ -88494,7 +88494,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
obj-$(CONFIG_NEW_LEDS) += leds/
obj-$(CONFIG_INFINIBAND) += infiniband/
obj-$(CONFIG_SGI_SN) += sn/
-@@ -98,6 +99,7 @@
+@@ -98,6 +99,7 @@ obj-$(CONFIG_DCA) += dca/
obj-$(CONFIG_HID) += hid/
obj-$(CONFIG_PPC_PS3) += ps3/
obj-$(CONFIG_OF) += of/
@@ -93571,7 +93571,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
-@@ -153,6 +153,55 @@
+@@ -153,6 +153,55 @@ config MFD_WM8350_I2C
I2C as the control interface. Additional options must be
selected to enable support for the functionality of the chip.
@@ -93637,7 +93637,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o
obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o
-@@ -31,4 +32,13 @@
+@@ -31,4 +32,13 @@ obj-$(CONFIG_MCP_UCB1200) += ucb1x00-ass
endif
obj-$(CONFIG_UCB1400_CORE) += ucb1400_core.o
@@ -95605,7 +95605,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
-@@ -401,6 +401,11 @@
+@@ -401,6 +401,11 @@ config THINKPAD_ACPI_HOTKEY_POLL
If you are not sure, say Y here. The driver enables polling only if
it is strictly necessary to do so.
@@ -95617,7 +95617,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
config ATMEL_SSC
tristate "Device driver for Atmel SSC peripheral"
depends on AVR32 || ARCH_AT91
-@@ -500,4 +505,9 @@
+@@ -500,4 +505,9 @@ config SGI_GRU_DEBUG
source "drivers/misc/c2port/Kconfig"
@@ -95751,7 +95751,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
-@@ -33,3 +33,8 @@
+@@ -33,3 +33,8 @@ obj-$(CONFIG_SGI_XP) += sgi-xp/
obj-$(CONFIG_SGI_GRU) += sgi-gru/
obj-$(CONFIG_HP_ILO) += hpilo.o
obj-$(CONFIG_C2PORT) += c2port/
@@ -96429,7 +96429,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+MODULE_LICENSE("GPL");
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
-@@ -57,10 +57,11 @@
+@@ -57,10 +57,11 @@ static int mmc_schedule_delayed_work(str
/*
* Internal function. Flush all scheduled work from the MMC work queue.
*/
@@ -96442,7 +96442,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/**
* mmc_request_done - finish processing an MMC request
-@@ -495,7 +496,13 @@
+@@ -495,7 +496,13 @@ void mmc_set_timing(struct mmc_host *hos
*/
static void mmc_power_up(struct mmc_host *host)
{
@@ -96459,7 +96459,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
if (mmc_host_is_spi(host)) {
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
-@@ -48,6 +48,18 @@
+@@ -48,6 +48,18 @@ config MMC_SDHCI_PCI
If unsure, say N.
@@ -96480,7 +96480,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
depends on MMC_SDHCI_PCI
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
-@@ -11,6 +11,7 @@
+@@ -11,6 +11,7 @@ obj-$(CONFIG_MMC_PXA) += pxamci.o
obj-$(CONFIG_MMC_IMX) += imxmmc.o
obj-$(CONFIG_MMC_SDHCI) += sdhci.o
obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
@@ -96515,7 +96515,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#include "s3cmci.h"
-@@ -47,6 +56,9 @@
+@@ -47,6 +56,9 @@ static const int dbgmap_err = dbg_fail
static const int dbgmap_info = dbg_info | dbg_conf;
static const int dbgmap_debug = dbg_err | dbg_debug;
@@ -96525,7 +96525,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#define dbg(host, channels, args...) \
do { \
if (dbgmap_err & channels) \
-@@ -280,8 +292,11 @@
+@@ -280,8 +292,11 @@ static void do_pio_read(struct s3cmci_ho
* an even multiple of 4. */
if (fifo >= host->pio_bytes)
fifo = host->pio_bytes;
@@ -96538,7 +96538,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
host->pio_bytes -= fifo;
host->pio_count += fifo;
-@@ -353,8 +368,11 @@
+@@ -353,8 +368,11 @@ static void do_pio_write(struct s3cmci_h
* words, so round down to an even multiple of 4. */
if (fifo >= host->pio_bytes)
fifo = host->pio_bytes;
@@ -96551,7 +96551,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
host->pio_bytes -= fifo;
host->pio_count += fifo;
-@@ -373,7 +391,6 @@
+@@ -373,7 +391,6 @@ static void pio_tasklet(unsigned long da
{
struct s3cmci_host *host = (struct s3cmci_host *) data;
@@ -96559,7 +96559,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
disable_irq(host->irq);
if (host->pio_active == XFER_WRITE)
-@@ -614,7 +631,6 @@
+@@ -614,7 +631,6 @@ irq_out:
spin_unlock_irqrestore(&host->complete_lock, iflags);
return IRQ_HANDLED;
@@ -96567,7 +96567,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
}
/*
-@@ -1026,6 +1042,7 @@
+@@ -1026,6 +1042,7 @@ static void s3cmci_send_request(struct m
dbg(host, dbg_err, "data prepare error %d\n", res);
cmd->error = res;
cmd->data->error = res;
@@ -96575,7 +96575,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
mmc_request_done(mmc, mrq);
return;
-@@ -1263,10 +1280,8 @@
+@@ -1263,10 +1280,8 @@ static int __devinit s3cmci_probe(struct
host->is2440 = is2440;
host->pdata = pdev->dev.platform_data;
@@ -96587,7 +96587,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
spin_lock_init(&host->complete_lock);
tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host);
-@@ -1379,6 +1394,18 @@
+@@ -1379,6 +1394,18 @@ static int __devinit s3cmci_probe(struct
mmc->f_min = host->clk_rate / (host->clk_div * 256);
mmc->f_max = host->clk_rate / host->clk_div;
@@ -96606,7 +96606,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
if (host->pdata->ocr_avail)
mmc->ocr_avail = host->pdata->ocr_avail;
-@@ -1491,18 +1518,60 @@
+@@ -1491,18 +1518,60 @@ static int __devinit s3cmci_2440_probe(s
#ifdef CONFIG_PM
@@ -96669,7 +96669,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
}
#else /* CONFIG_PM */
-@@ -1560,9 +1629,13 @@
+@@ -1560,9 +1629,13 @@ static void __exit s3cmci_exit(void)
module_init(s3cmci_init);
module_exit(s3cmci_exit);
@@ -96695,7 +96695,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* FIXME: DMA Resource management ?! */
#define S3CMCI_DMA 0
-@@ -68,6 +71,13 @@
+@@ -68,6 +71,13 @@ struct s3cmci_host {
unsigned int ccnt, dcnt;
struct tasklet_struct pio_tasklet;
@@ -96711,7 +96711,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#endif
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
-@@ -73,6 +73,11 @@
+@@ -73,6 +73,11 @@ static void sdhci_dumpregs(struct sdhci_
readl(host->ioaddr + SDHCI_CAPABILITIES),
readl(host->ioaddr + SDHCI_MAX_CURRENT));
@@ -96723,7 +96723,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
printk(KERN_DEBUG DRIVER_NAME ": ===========================================\n");
}
-@@ -731,6 +736,23 @@
+@@ -731,6 +736,23 @@ static void sdhci_set_transfer_mode(stru
writew(mode, host->ioaddr + SDHCI_TRANSFER_MODE);
}
@@ -96747,7 +96747,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
static void sdhci_finish_data(struct sdhci_host *host)
{
struct mmc_data *data;
-@@ -744,6 +766,8 @@
+@@ -744,6 +766,8 @@ static void sdhci_finish_data(struct sdh
if (host->flags & SDHCI_USE_ADMA)
sdhci_adma_table_post(host, data);
else {
@@ -96756,7 +96756,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
dma_unmap_sg(mmc_dev(host->mmc), data->sg,
data->sg_len, (data->flags & MMC_DATA_READ) ?
DMA_FROM_DEVICE : DMA_TO_DEVICE);
-@@ -883,13 +907,18 @@
+@@ -883,13 +907,18 @@ static void sdhci_finish_command(struct
static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
{
@@ -96778,7 +96778,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
if (clock == 0)
-@@ -926,6 +955,8 @@
+@@ -926,6 +955,8 @@ out:
host->clock = clock;
}
@@ -96787,7 +96787,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
{
u8 pwr;
-@@ -999,12 +1030,13 @@
+@@ -999,12 +1030,13 @@ static void sdhci_request(struct mmc_hos
#endif
host->mrq = mrq;
@@ -96802,7 +96802,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
sdhci_send_command(host, mrq->cmd);
mmiowb();
-@@ -1033,6 +1065,9 @@
+@@ -1033,6 +1065,9 @@ static void sdhci_set_ios(struct mmc_hos
sdhci_init(host);
}
@@ -96812,7 +96812,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
sdhci_set_clock(host, ios->clock);
if (ios->power_mode == MMC_POWER_OFF)
-@@ -1136,7 +1171,7 @@
+@@ -1136,7 +1171,7 @@ static void sdhci_tasklet_card(unsigned
host = (struct sdhci_host*)param;
spin_lock_irqsave(&host->lock, flags);
@@ -96821,7 +96821,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
if (host->mrq) {
printk(KERN_ERR "%s: Card removed during transfer!\n",
-@@ -1151,7 +1186,7 @@
+@@ -1151,7 +1186,7 @@ static void sdhci_tasklet_card(unsigned
tasklet_schedule(&host->finish_tasklet);
}
}
@@ -96830,7 +96830,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
spin_unlock_irqrestore(&host->lock, flags);
mmc_detect_change(host->mmc, msecs_to_jiffies(200));
-@@ -1607,17 +1642,23 @@
+@@ -1607,17 +1642,23 @@ int sdhci_add_host(struct sdhci_host *ho
mmc_dev(host->mmc)->dma_mask = &host->dma_mask;
}
@@ -96869,7 +96869,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#define SDHCI_HOST_CONTROL 0x28
#define SDHCI_CTRL_LED 0x01
-@@ -270,6 +271,14 @@
+@@ -270,6 +271,14 @@ struct sdhci_host {
struct sdhci_ops {
int (*enable_dma)(struct sdhci_host *host);
@@ -96884,7 +96884,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
};
-@@ -277,6 +286,8 @@
+@@ -277,6 +286,8 @@ extern struct sdhci_host *sdhci_alloc_ho
size_t priv_size);
extern void sdhci_free_host(struct sdhci_host *host);
@@ -96895,7 +96895,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
return (void *)host->private;
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
-@@ -392,6 +392,7 @@
+@@ -392,6 +392,7 @@ static int sdhci_pci_enable_dma(struct s
static struct sdhci_ops sdhci_pci_ops = {
.enable_dma = sdhci_pci_enable_dma,
@@ -97338,7 +97338,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#ifdef CONFIG_MTD_NAND_S3C2410_HWECC
static int hardware_ecc = 1;
-@@ -231,8 +231,6 @@
+@@ -231,8 +231,6 @@ static int s3c2410_nand_setrate(struct s
BUG();
}
@@ -97347,7 +97347,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
local_irq_save(flags);
cfg = readl(info->regs + S3C2410_NFCONF);
-@@ -240,6 +238,8 @@
+@@ -240,6 +238,8 @@ static int s3c2410_nand_setrate(struct s
cfg |= set;
writel(cfg, info->regs + S3C2410_NFCONF);
@@ -97356,7 +97356,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
local_irq_restore(flags);
return 0;
-@@ -438,7 +438,7 @@
+@@ -438,7 +438,7 @@ static int s3c2410_nand_correct_data(str
if ((diff0 & ~(1<<fls(diff0))) == 0)
return 1;
@@ -97365,7 +97365,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
}
/* ECC functions
-@@ -530,7 +530,12 @@
+@@ -530,7 +530,12 @@ static void s3c2410_nand_read_buf(struct
static void s3c2440_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
@@ -97378,7 +97378,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
}
static void s3c2410_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
-@@ -645,17 +650,31 @@
+@@ -645,17 +650,31 @@ static int s3c2410_nand_remove(struct pl
}
#ifdef CONFIG_MTD_PARTITIONS
@@ -97412,7 +97412,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
return add_mtd_device(&mtd->mtd);
}
#else
-@@ -684,9 +703,13 @@
+@@ -684,9 +703,13 @@ static void s3c2410_nand_init_chip(struc
chip->select_chip = s3c2410_nand_select_chip;
chip->chip_delay = 50;
chip->priv = nmtd;
@@ -97427,7 +97427,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
switch (info->cpu_type) {
case TYPE_S3C2410:
chip->IO_ADDR_W = regs + S3C2410_NFDATA;
-@@ -726,7 +749,7 @@
+@@ -726,7 +749,7 @@ static void s3c2410_nand_init_chip(struc
nmtd->mtd.owner = THIS_MODULE;
nmtd->set = set;
@@ -97438,7 +97438,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
chip->ecc.mode = NAND_ECC_HW;
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
-@@ -48,6 +48,7 @@
+@@ -48,6 +48,7 @@ module_param_named(fw_name, lbs_fw_name,
static const struct sdio_device_id if_sdio_ids[] = {
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_LIBERTAS) },
@@ -97446,7 +97446,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
{ /* end: all zeroes */ },
};
-@@ -72,7 +73,12 @@
+@@ -72,7 +73,12 @@ static struct if_sdio_model if_sdio_mode
.helper = "sd8686_helper.bin",
.firmware = "sd8686.bin",
},
@@ -97473,7 +97473,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
peripherals to be configured by software, e.g. assign IRQ's or other
--- a/drivers/pnp/resource.c
+++ b/drivers/pnp/resource.c
-@@ -436,6 +436,7 @@
+@@ -436,6 +436,7 @@ int pnp_check_dma(struct pnp_dev *dev, s
}
}
@@ -97481,7 +97481,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* check if the resource is already in use, skip if the
* device is active because it itself may be in use */
if (!dev->active) {
-@@ -443,6 +444,7 @@
+@@ -443,6 +444,7 @@ int pnp_check_dma(struct pnp_dev *dev, s
return 0;
free_dma(*dma);
}
@@ -98252,7 +98252,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+MODULE_LICENSE("GPL");
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
-@@ -68,4 +68,24 @@
+@@ -68,4 +68,24 @@ config BATTERY_BQ27x00
help
Say Y here to enable support for batteries with BQ27200(I2C) chip.
@@ -98279,7 +98279,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
-@@ -23,3 +23,9 @@
+@@ -23,3 +23,9 @@ obj-$(CONFIG_BATTERY_OLPC) += olpc_batte
obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o
obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o
obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o
@@ -98709,7 +98709,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+MODULE_ALIAS("platform:pcf50633-mbc");
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
-@@ -1113,6 +1113,7 @@
+@@ -1113,6 +1113,7 @@ int regulator_disable(struct regulator *
if (!regulator->enabled) {
printk(KERN_ERR "%s: not in use by this consumer\n",
__func__);
@@ -98719,7 +98719,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
-@@ -73,4 +73,10 @@
+@@ -73,4 +73,10 @@ config REGULATOR_DA903X
Say y here to support the BUCKs and LDOs regulators found on
Dialog Semiconductor DA9030/DA9034 PMIC.
@@ -98732,7 +98732,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
endif
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
-@@ -11,5 +11,6 @@
+@@ -11,5 +11,6 @@ obj-$(CONFIG_REGULATOR_BQ24022) += bq240
obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
@@ -99074,7 +99074,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+MODULE_ALIAS("platform:pcf50633-regulator");
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
-@@ -219,6 +219,18 @@
+@@ -219,6 +219,18 @@ config RTC_DRV_PCF8583
This driver can also be built as a module. If so, the module
will be called rtc-pcf8583.
@@ -99095,7 +99095,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
help
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
-@@ -50,6 +50,8 @@
+@@ -50,6 +50,8 @@ obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max
obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o
obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o
obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o
@@ -99723,7 +99723,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
* of these rtc blocks in */
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
-@@ -447,7 +447,7 @@
+@@ -447,7 +447,7 @@ config SERIAL_CLPS711X_CONSOLE
config SERIAL_SAMSUNG
tristate "Samsung SoC serial support"
@@ -99732,7 +99732,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
select SERIAL_CORE
help
Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
-@@ -455,6 +455,16 @@
+@@ -455,6 +455,16 @@ config SERIAL_SAMSUNG
provide all of these ports, depending on how the serial port
pins are configured.
@@ -99749,7 +99749,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
config SERIAL_SAMSUNG_DEBUG
bool "Samsung SoC serial debug"
depends on SERIAL_SAMSUNG && DEBUG_LL
-@@ -508,7 +518,20 @@
+@@ -508,7 +518,20 @@ config SERIAL_S3C2440
help
Serial port support for the Samsung S3C2440 and S3C2442 SoC
@@ -99773,7 +99773,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
bool "DECstation DZ serial driver"
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
-@@ -41,6 +41,8 @@
+@@ -41,6 +41,8 @@ obj-$(CONFIG_SERIAL_S3C2400) += s3c2400.
obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
@@ -100109,7 +100109,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* macros to change one thing to another */
#define tx_enabled(port) ((port)->unused[0])
-@@ -136,8 +128,10 @@
+@@ -136,8 +128,10 @@ static void s3c24xx_serial_rx_disable(st
static void s3c24xx_serial_stop_tx(struct uart_port *port)
{
@@ -100121,7 +100121,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
tx_enabled(port) = 0;
if (port->flags & UPF_CONS_FLOW)
s3c24xx_serial_rx_enable(port);
-@@ -146,11 +140,13 @@
+@@ -146,11 +140,13 @@ static void s3c24xx_serial_stop_tx(struc
static void s3c24xx_serial_start_tx(struct uart_port *port)
{
@@ -100136,7 +100136,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
tx_enabled(port) = 1;
}
}
-@@ -158,9 +154,11 @@
+@@ -158,9 +154,11 @@ static void s3c24xx_serial_start_tx(stru
static void s3c24xx_serial_stop_rx(struct uart_port *port)
{
@@ -100149,7 +100149,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
rx_enabled(port) = 0;
}
}
-@@ -241,7 +239,7 @@
+@@ -241,7 +239,7 @@ s3c24xx_serial_rx_chars(int irq, void *d
port->icount.rx++;
if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) {
@@ -100158,7 +100158,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
ch, uerstat);
/* check for break */
-@@ -384,13 +382,13 @@
+@@ -384,13 +382,13 @@ static void s3c24xx_serial_shutdown(stru
struct s3c24xx_uart_port *ourport = to_ourport(port);
if (ourport->tx_claimed) {
@@ -100174,7 +100174,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
ourport->rx_claimed = 0;
rx_enabled(port) = 0;
}
-@@ -407,12 +405,11 @@
+@@ -407,12 +405,11 @@ static int s3c24xx_serial_startup(struct
rx_enabled(port) = 1;
@@ -100189,7 +100189,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
return ret;
}
-@@ -422,12 +419,11 @@
+@@ -422,12 +419,11 @@ static int s3c24xx_serial_startup(struct
tx_enabled(port) = 1;
@@ -100204,7 +100204,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
goto err;
}
-@@ -452,6 +448,8 @@
+@@ -452,6 +448,8 @@ static void s3c24xx_serial_pm(struct uar
{
struct s3c24xx_uart_port *ourport = to_ourport(port);
@@ -100213,7 +100213,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
switch (level) {
case 3:
if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
-@@ -514,6 +512,7 @@
+@@ -514,6 +512,7 @@ s3c24xx_serial_setsource(struct uart_por
struct baud_calc {
struct s3c24xx_uart_clksrc *clksrc;
unsigned int calc;
@@ -100221,7 +100221,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
unsigned int quot;
struct clk *src;
};
-@@ -523,6 +522,7 @@
+@@ -523,6 +522,7 @@ static int s3c24xx_serial_calcbaud(struc
struct s3c24xx_uart_clksrc *clksrc,
unsigned int baud)
{
@@ -100229,7 +100229,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
unsigned long rate;
calc->src = clk_get(port->dev, clksrc->name);
-@@ -533,8 +533,24 @@
+@@ -533,8 +533,24 @@ static int s3c24xx_serial_calcbaud(struc
rate /= clksrc->divisor;
calc->clksrc = clksrc;
@@ -100256,7 +100256,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
calc->quot--;
return 1;
-@@ -617,6 +633,30 @@
+@@ -617,6 +633,30 @@ static unsigned int s3c24xx_serial_getcl
return best->quot;
}
@@ -100287,7 +100287,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
static void s3c24xx_serial_set_termios(struct uart_port *port,
struct ktermios *termios,
struct ktermios *old)
-@@ -629,6 +669,7 @@
+@@ -629,6 +669,7 @@ static void s3c24xx_serial_set_termios(s
unsigned int baud, quot;
unsigned int ulcon;
unsigned int umcon;
@@ -100295,7 +100295,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/*
* We don't support modem control lines.
-@@ -650,6 +691,7 @@
+@@ -650,6 +691,7 @@ static void s3c24xx_serial_set_termios(s
/* check to see if we need to change clock source */
if (ourport->clksrc != clksrc || ourport->baudclk != clk) {
@@ -100303,7 +100303,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
s3c24xx_serial_setsource(port, clksrc);
if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
-@@ -661,6 +703,14 @@
+@@ -661,6 +703,14 @@ static void s3c24xx_serial_set_termios(s
ourport->clksrc = clksrc;
ourport->baudclk = clk;
@@ -100318,7 +100318,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
}
switch (termios->c_cflag & CSIZE) {
-@@ -702,12 +752,16 @@
+@@ -702,12 +752,16 @@ static void s3c24xx_serial_set_termios(s
spin_lock_irqsave(&port->lock, flags);
@@ -100336,7 +100336,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
rd_regl(port, S3C2410_ULCON),
rd_regl(port, S3C2410_UCON),
-@@ -752,6 +806,8 @@
+@@ -752,6 +806,8 @@ static const char *s3c24xx_serial_type(s
return "S3C2440";
case PORT_S3C2412:
return "S3C2412";
@@ -100345,7 +100345,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
default:
return NULL;
}
-@@ -827,14 +883,14 @@
+@@ -827,14 +883,14 @@ static struct uart_ops s3c24xx_serial_op
static struct uart_driver s3c24xx_uart_drv = {
.owner = THIS_MODULE,
.dev_name = "s3c2410_serial",
@@ -100362,7 +100362,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
[0] = {
.port = {
.lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock),
-@@ -859,7 +915,7 @@
+@@ -859,7 +915,7 @@ static struct s3c24xx_uart_port s3c24xx_
.line = 1,
}
},
@@ -100371,7 +100371,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
[2] = {
.port = {
-@@ -872,10 +928,88 @@
+@@ -872,10 +928,88 @@ static struct s3c24xx_uart_port s3c24xx_
.flags = UPF_BOOT_AUTOCONF,
.line = 2,
}
@@ -100460,7 +100460,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* s3c24xx_serial_resetport
*
* wrapper to call the specific reset for this port (reset the fifos
-@@ -890,6 +1024,93 @@
+@@ -890,6 +1024,93 @@ static inline int s3c24xx_serial_resetpo
return (info->reset_port)(port, cfg);
}
@@ -100554,7 +100554,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* s3c24xx_serial_init_port
*
* initialise a single serial port from the platform device given
-@@ -914,8 +1135,11 @@
+@@ -914,8 +1135,11 @@ static int s3c24xx_serial_init_port(stru
if (port->mapbase != 0)
return 0;
@@ -100568,7 +100568,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* setup info for port */
port->dev = &platdev->dev;
-@@ -943,18 +1167,26 @@
+@@ -943,18 +1167,26 @@ static int s3c24xx_serial_init_port(stru
dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
@@ -100600,7 +100600,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* reset the fifos (and setup the uart) */
s3c24xx_serial_resetport(port, cfg);
-@@ -987,6 +1219,7 @@
+@@ -987,6 +1219,7 @@ int s3c24xx_serial_probe(struct platform
ourport = &s3c24xx_serial_ports[probe_index];
probe_index++;
@@ -100608,7 +100608,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
dbg("%s: initialising port %p...\n", __func__, ourport);
-@@ -1002,6 +1235,10 @@
+@@ -1002,6 +1235,10 @@ int s3c24xx_serial_probe(struct platform
if (ret < 0)
printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__);
@@ -100619,7 +100619,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
return 0;
probe_err:
-@@ -1015,6 +1252,7 @@
+@@ -1015,6 +1252,7 @@ int s3c24xx_serial_remove(struct platfor
struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
if (port) {
@@ -100627,7 +100627,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
device_remove_file(&dev->dev, &dev_attr_clock_source);
uart_remove_one_port(&s3c24xx_uart_drv, port);
}
-@@ -1038,6 +1276,16 @@
+@@ -1038,6 +1276,16 @@ static int s3c24xx_serial_suspend(struct
return 0;
}
@@ -100644,7 +100644,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
static int s3c24xx_serial_resume(struct platform_device *dev)
{
struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
-@@ -1049,6 +1297,9 @@
+@@ -1049,6 +1297,9 @@ static int s3c24xx_serial_resume(struct
clk_disable(ourport->clk);
uart_resume_port(&s3c24xx_uart_drv, port);
@@ -100654,7 +100654,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
}
return 0;
-@@ -1059,6 +1310,12 @@
+@@ -1059,6 +1310,12 @@ int s3c24xx_serial_init(struct platform_
struct s3c24xx_uart_info *info)
{
dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
@@ -100667,7 +100667,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#ifdef CONFIG_PM
drv->suspend = s3c24xx_serial_suspend;
-@@ -1098,6 +1355,13 @@
+@@ -1098,6 +1355,13 @@ module_exit(s3c24xx_serial_modexit);
#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
static struct uart_port *cons_uart;
@@ -100681,7 +100681,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
static int
s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
-@@ -1122,9 +1386,21 @@
+@@ -1122,9 +1386,21 @@ static void
s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
{
unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
@@ -100703,7 +100703,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
}
static void
-@@ -1219,7 +1495,7 @@
+@@ -1219,7 +1495,7 @@ static int s3c24xx_serial_init_ports(str
platdev_ptr = s3c24xx_uart_devs;
@@ -100712,7 +100712,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
s3c24xx_serial_init_port(ptr, info, *platdev_ptr);
}
-@@ -1240,7 +1516,7 @@
+@@ -1240,7 +1516,7 @@ s3c24xx_serial_console_setup(struct cons
/* is this a valid port */
@@ -100732,7 +100732,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
struct s3c24xx_uart_info {
char *name;
unsigned int type;
-@@ -21,6 +23,10 @@
+@@ -21,6 +23,10 @@ struct s3c24xx_uart_info {
unsigned long tx_fifoshift;
unsigned long tx_fifofull;
@@ -100743,7 +100743,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* clock source control */
int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
-@@ -33,12 +39,23 @@
+@@ -33,12 +39,23 @@ struct s3c24xx_uart_info {
struct s3c24xx_uart_port {
unsigned char rx_claimed;
unsigned char tx_claimed;
@@ -100780,7 +100780,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
struct s3c24xx_spi {
--- a/drivers/spi/spi_s3c24xx_gpio.c
+++ b/drivers/spi/spi_s3c24xx_gpio.c
-@@ -91,7 +91,7 @@
+@@ -91,7 +91,7 @@ static void s3c2410_spigpio_chipselect(s
struct s3c2410_spigpio *sg = spidev_to_sg(dev);
if (sg->info && sg->info->chip_select)
@@ -100789,7 +100789,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
}
static int s3c2410_spigpio_probe(struct platform_device *dev)
-@@ -100,6 +100,7 @@
+@@ -100,6 +100,7 @@ static int s3c2410_spigpio_probe(struct
struct spi_master *master;
struct s3c2410_spigpio *sp;
int ret;
@@ -100797,7 +100797,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
master = spi_alloc_master(&dev->dev, sizeof(struct s3c2410_spigpio));
if (master == NULL) {
-@@ -112,9 +113,11 @@
+@@ -112,9 +113,11 @@ static int s3c2410_spigpio_probe(struct
platform_set_drvdata(dev, sp);
@@ -100810,7 +100810,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* setup spi bitbang adaptor */
sp->bitbang.master = spi_master_get(master);
sp->bitbang.master->bus_num = info->bus_num;
-@@ -143,6 +146,22 @@
+@@ -143,6 +146,22 @@ static int s3c2410_spigpio_probe(struct
if (ret)
goto err_no_bitbang;
@@ -100835,7 +100835,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
err_no_bitbang:
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
-@@ -1045,7 +1045,11 @@
+@@ -1045,7 +1045,11 @@ composite_resume(struct usb_gadget *gadg
/*-------------------------------------------------------------------------*/
static struct usb_gadget_driver composite_driver = {
@@ -100849,7 +100849,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
.unbind = __exit_p(composite_unbind),
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
-@@ -122,11 +122,16 @@
+@@ -122,11 +122,16 @@ static inline bool has_rndis(void)
* Instead: allocate your own, using normal USB-IF procedures.
*/
@@ -100866,7 +100866,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* For hardware that can't talk CDC, we use the same vendor ID that
* ARM Linux has used for ethernet-over-usb, both with sa1100 and
-@@ -147,8 +152,8 @@
+@@ -147,8 +152,8 @@ static inline bool has_rndis(void)
* used with CDC Ethernet, Linux 2.4 hosts will need updates to choose
* the non-RNDIS configuration.
*/
@@ -100890,7 +100890,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#include "s3c2410_udc.h"
-@@ -134,6 +134,8 @@
+@@ -134,6 +134,8 @@ static int dprintk(int level, const char
return 0;
}
#endif
@@ -100899,7 +100899,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p)
{
u32 addr_reg,pwr_reg,ep_int_reg,usb_int_reg;
-@@ -197,6 +199,7 @@
+@@ -197,6 +199,7 @@ static const struct file_operations s3c2
.release = single_release,
.owner = THIS_MODULE,
};
@@ -100907,7 +100907,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* io macros */
-@@ -843,6 +846,7 @@
+@@ -843,6 +846,7 @@ static void s3c2410_udc_handle_ep(struct
u32 ep_csr1;
u32 idx;
@@ -100915,7 +100915,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
if (likely (!list_empty(&ep->queue)))
req = list_entry(ep->queue.next,
struct s3c2410_request, queue);
-@@ -882,6 +886,8 @@
+@@ -882,6 +886,8 @@ static void s3c2410_udc_handle_ep(struct
if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && req) {
s3c2410_udc_read_fifo(ep,req);
@@ -100924,7 +100924,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
}
}
}
-@@ -1890,6 +1896,7 @@
+@@ -1890,6 +1896,7 @@ static int s3c2410_udc_probe(struct plat
udc->vbus = 1;
}
@@ -100932,7 +100932,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
if (s3c2410_udc_debugfs_root) {
udc->regs_info = debugfs_create_file("registers", S_IRUGO,
s3c2410_udc_debugfs_root,
-@@ -1897,6 +1904,7 @@
+@@ -1897,6 +1904,7 @@ static int s3c2410_udc_probe(struct plat
if (!udc->regs_info)
dev_warn(dev, "debugfs file creation failed\n");
}
@@ -100940,7 +100940,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
dev_dbg(dev, "probe ok\n");
-@@ -2003,12 +2011,14 @@
+@@ -2003,12 +2011,14 @@ static int __init udc_init(void)
dprintk(DEBUG_NORMAL, "%s: version %s\n", gadget_name, DRIVER_VERSION);
@@ -100965,7 +100965,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#define valid_port(idx) ((idx) == 1 || (idx) == 2)
-@@ -308,6 +309,42 @@
+@@ -308,6 +309,42 @@ static void s3c2410_hcd_oc(struct s3c241
local_irq_restore(flags);
}
@@ -101008,7 +101008,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* may be called without controller electrically present */
/* may be called with controller, bus, and devices active */
-@@ -325,6 +362,7 @@
+@@ -325,6 +362,7 @@ static void s3c2410_hcd_oc(struct s3c241
static void
usb_hcd_s3c2410_remove (struct usb_hcd *hcd, struct platform_device *dev)
{
@@ -101016,7 +101016,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
usb_remove_hcd(hcd);
s3c2410_stop_hc(dev);
iounmap(hcd->regs);
-@@ -392,8 +430,15 @@
+@@ -392,8 +430,15 @@ static int usb_hcd_s3c2410_probe (const
if (retval != 0)
goto err_ioremap;
@@ -101306,7 +101306,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+MODULE_LICENSE("GPL");
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
-@@ -152,6 +152,13 @@
+@@ -152,6 +152,13 @@ config BACKLIGHT_OMAP1
the PWL module of OMAP1 processors. Say Y if your board
uses this hardware.
@@ -101322,7 +101322,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
depends on BACKLIGHT_CLASS_DEVICE && SH_HP6XX
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
-@@ -12,6 +12,7 @@
+@@ -12,6 +12,7 @@ obj-$(CONFIG_LCD_TOSA) += tosa_lcd.o
obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o
obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o
@@ -101332,7 +101332,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
-@@ -401,6 +401,9 @@
+@@ -401,6 +401,9 @@ static void fb_flashcursor(struct work_s
int c;
int mode;
@@ -101342,7 +101342,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
acquire_console_sem();
if (ops && ops->currcon != -1)
vc = vc_cons[ops->currcon].d;
-@@ -3225,13 +3228,17 @@
+@@ -3225,13 +3228,17 @@ static void fbcon_get_requirement(struct
static int fbcon_event_notify(struct notifier_block *self,
unsigned long action, void *data)
{
@@ -102176,7 +102176,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+module_exit(jbt_exit);
--- a/drivers/video/display/Kconfig
+++ b/drivers/video/display/Kconfig
-@@ -21,4 +21,15 @@
+@@ -21,4 +21,15 @@ config DISPLAY_SUPPORT
comment "Display hardware drivers"
depends on DISPLAY_SUPPORT
@@ -102202,7 +102202,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
-@@ -1918,6 +1918,30 @@
+@@ -1918,6 +1918,30 @@ config FB_TMIO_ACCELL
depends on FB_TMIO
default y
@@ -102235,7 +102235,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
depends on FB && ARCH_S3C2410
--- a/drivers/video/logo/Kconfig
+++ b/drivers/video/logo/Kconfig
-@@ -77,6 +77,11 @@
+@@ -77,6 +77,11 @@ config LOGO_SUPERH_CLUT224
depends on SUPERH
default y
@@ -102249,7 +102249,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
depends on M32R
--- a/drivers/video/logo/logo.c
+++ b/drivers/video/logo/logo.c
-@@ -35,6 +35,7 @@
+@@ -35,6 +35,7 @@ extern const struct linux_logo logo_supe
extern const struct linux_logo logo_superh_vga16;
extern const struct linux_logo logo_superh_clut224;
extern const struct linux_logo logo_m32r_clut224;
@@ -102257,7 +102257,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
static int nologo;
module_param(nologo, bool, 0);
-@@ -115,6 +116,10 @@
+@@ -115,6 +116,10 @@ const struct linux_logo * __init_refok f
/* M32R Linux logo */
logo = &logo_m32r_clut224;
#endif
@@ -142276,7 +142276,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
--- a/drivers/video/logo/Makefile
+++ b/drivers/video/logo/Makefile
-@@ -15,6 +15,7 @@
+@@ -15,6 +15,7 @@ obj-$(CONFIG_LOGO_SUPERH_MONO) += logo_
obj-$(CONFIG_LOGO_SUPERH_VGA16) += logo_superh_vga16.o
obj-$(CONFIG_LOGO_SUPERH_CLUT224) += logo_superh_clut224.o
obj-$(CONFIG_LOGO_M32R_CLUT224) += logo_m32r_clut224.o
@@ -142286,7 +142286,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
-@@ -109,6 +109,7 @@
+@@ -109,6 +109,7 @@ obj-$(CONFIG_FB_METRONOME) += met
obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o
obj-$(CONFIG_FB_SH7760) += sh7760fb.o
obj-$(CONFIG_FB_IMX) += imxfb.o
@@ -142296,7 +142296,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
obj-$(CONFIG_FB_COBALT) += cobalt_lcdfb.o
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
-@@ -1017,6 +1017,8 @@
+@@ -1017,6 +1017,8 @@ static int s3c2410fb_resume(struct platf
s3c2410fb_init_registers(fbinfo);
@@ -143346,7 +143346,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+MODULE_ALIAS("platform:s3c-fb");
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
-@@ -233,6 +233,12 @@
+@@ -233,6 +233,12 @@ config ORION5X_WATCHDOG
To compile this driver as a module, choose M here: the
module will be called orion5x_wdt.
@@ -143359,7 +143359,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
# ARM26 Architecture
# AVR32 Architecture
-@@ -784,7 +790,7 @@
+@@ -784,7 +790,7 @@ config WATCHDOG_RTAS
tristate "RTAS watchdog"
depends on PPC_RTAS
help
@@ -143370,7 +143370,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
will be called wdrtas.
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
-@@ -41,6 +41,7 @@
+@@ -41,6 +41,7 @@ obj-$(CONFIG_PNX4008_WATCHDOG) += pnx400
obj-$(CONFIG_IOP_WATCHDOG) += iop_wdt.o
obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o
obj-$(CONFIG_ORION5X_WATCHDOG) += orion5x_wdt.o
@@ -143607,7 +143607,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
--- a/fs/jffs2/background.c
+++ b/fs/jffs2/background.c
-@@ -95,13 +95,17 @@
+@@ -95,13 +95,17 @@ static int jffs2_garbage_collect_thread(
spin_unlock(&c->erase_completion_lock);
@@ -145046,7 +145046,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+#endif
--- a/include/linux/device.h
+++ b/include/linux/device.h
-@@ -48,6 +48,11 @@
+@@ -48,6 +48,11 @@ extern int __must_check bus_create_file(
struct bus_attribute *);
extern void bus_remove_file(struct bus_type *, struct bus_attribute *);
@@ -145060,7 +145060,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
struct bus_attribute *bus_attrs;
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
-@@ -123,6 +123,7 @@
+@@ -123,6 +123,7 @@ struct dentry;
#define FB_ACCEL_TRIDENT_3DIMAGE 51 /* Trident 3DImage */
#define FB_ACCEL_TRIDENT_BLADE3D 52 /* Trident Blade3D */
#define FB_ACCEL_TRIDENT_BLADEXP 53 /* Trident BladeXP */
@@ -145270,7 +145270,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+#endif
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
-@@ -225,6 +225,8 @@
+@@ -225,6 +225,8 @@ extern struct ratelimit_state printk_rat
extern int printk_ratelimit(void);
extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
unsigned int interval_msec);
@@ -146781,7 +146781,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
-@@ -129,6 +129,8 @@
+@@ -129,6 +129,8 @@ struct mmc_request {
struct mmc_host;
struct mmc_card;
@@ -146803,7 +146803,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#endif
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
-@@ -713,7 +713,7 @@
+@@ -713,7 +713,7 @@ static inline int shmem_lock(struct file
}
#endif
struct file *shmem_file_setup(char *name, loff_t size, unsigned long flags);
@@ -147743,7 +147743,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+#endif
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
-@@ -146,6 +146,12 @@
+@@ -146,6 +146,12 @@ struct pbe {
struct pbe *next;
};
@@ -148002,7 +148002,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+#endif
--- a/include/linux/vt.h
+++ b/include/linux/vt.h
-@@ -18,8 +18,19 @@
+@@ -18,8 +18,19 @@ extern int unregister_vt_notifier(struct
* resizing).
*/
#define MIN_NR_CONSOLES 1 /* must be at least 1 */
@@ -148024,7 +148024,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
-@@ -244,6 +244,13 @@
+@@ -244,6 +244,13 @@ int snd_soc_dapm_nc_pin(struct snd_soc_c
int snd_soc_dapm_get_pin_status(struct snd_soc_codec *codec, char *pin);
int snd_soc_dapm_sync(struct snd_soc_codec *codec);
@@ -148040,7 +148040,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
snd_soc_dapm_input = 0, /* input pin */
--- a/init/Kconfig
+++ b/init/Kconfig
-@@ -732,6 +732,15 @@
+@@ -720,6 +720,15 @@ config AIO
by some high performance threaded applications. Disabling
this option saves about 7k.
@@ -148058,7 +148058,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
bool "Enable VM event counters for /proc/vmstat" if EMBEDDED
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
-@@ -380,6 +380,7 @@
+@@ -380,6 +380,7 @@ handle_level_irq(unsigned int irq, struc
out_unlock:
spin_unlock(&desc->lock);
}
@@ -148066,7 +148066,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/**
* handle_fasteoi_irq - irq handler for transparent controllers
-@@ -583,6 +584,7 @@
+@@ -583,6 +584,7 @@ __set_irq_handler(unsigned int irq, irq_
}
spin_unlock_irqrestore(&desc->lock, flags);
}
@@ -148076,7 +148076,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
set_irq_chip_and_handler(unsigned int irq, struct irq_chip *chip,
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
-@@ -132,6 +132,9 @@
+@@ -132,6 +132,9 @@ static inline int suspend_test(int level
#endif /* CONFIG_PM_SLEEP */
@@ -148086,7 +148086,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#ifdef CONFIG_SUSPEND
#ifdef CONFIG_PM_TEST_SUSPEND
-@@ -322,6 +325,8 @@
+@@ -322,6 +325,8 @@ int suspend_devices_and_enter(suspend_st
if (!suspend_ops)
return -ENOSYS;
@@ -148095,7 +148095,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
if (suspend_ops->begin) {
error = suspend_ops->begin(state);
if (error)
-@@ -365,6 +370,8 @@
+@@ -365,6 +370,8 @@ int suspend_devices_and_enter(suspend_st
Close:
if (suspend_ops->end)
suspend_ops->end();
@@ -148104,7 +148104,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
return error;
Recover_platform:
-@@ -427,6 +434,8 @@
+@@ -427,6 +434,8 @@ static int enter_state(suspend_state_t s
return -EBUSY;
printk(KERN_INFO "PM: Syncing filesystems ... ");
@@ -148127,7 +148127,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/*
* Architectures can override it:
-@@ -67,6 +70,12 @@
+@@ -67,6 +70,12 @@ int console_printk[4] = {
int oops_in_progress;
EXPORT_SYMBOL(oops_in_progress);
@@ -148140,7 +148140,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/*
* console_sem protects the console_drivers list, and also
* provides serialisation for access to the entire console
-@@ -667,8 +676,39 @@
+@@ -667,8 +676,39 @@ asmlinkage int vprintk(const char *fmt,
/* Emit the output into the temporary buffer */
printed_len += vscnprintf(printk_buf + printed_len,
sizeof(printk_buf) - printed_len, fmt, args);
@@ -148184,7 +148184,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
* appropriate log level tags, we insert them here
--- a/kernel/timer.c
+++ b/kernel/timer.c
-@@ -813,7 +813,11 @@
+@@ -813,7 +813,11 @@ static int cascade(struct tvec_base *bas
* don't have to detach them individually.
*/
list_for_each_entry_safe(timer, tmp, &tv_list, entry) {
@@ -148199,7 +148199,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
--- a/MAINTAINERS
+++ b/MAINTAINERS
-@@ -1705,6 +1705,20 @@
+@@ -1705,6 +1705,20 @@ FILE LOCKING (flock() and fcntl()/lockf(
P: Matthew Wilcox
M: matthew@wil.cx
L: linux-fsdevel@vger.kernel.org
@@ -148902,7 +148902,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+MODULE_LICENSE("GPL");
--- a/mm/Makefile
+++ b/mm/Makefile
-@@ -22,6 +22,7 @@
+@@ -22,6 +22,7 @@ obj-$(CONFIG_NUMA) += mempolicy.o
obj-$(CONFIG_SPARSEMEM) += sparse.o
obj-$(CONFIG_SPARSEMEM_VMEMMAP) += sparse-vmemmap.o
obj-$(CONFIG_SHMEM) += shmem.o
@@ -148912,7 +148912,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
obj-$(CONFIG_SLOB) += slob.o
--- a/mm/tiny-shmem.c
+++ b/mm/tiny-shmem.c
-@@ -97,6 +97,22 @@
+@@ -97,6 +97,22 @@ put_memory:
}
EXPORT_SYMBOL_GPL(shmem_file_setup);
@@ -148935,7 +148935,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/**
* shmem_zero_setup - setup a shared anonymous mapping
* @vma: the vma to be mmapped is prepared by do_mmap_pgoff
-@@ -110,10 +126,8 @@
+@@ -110,10 +126,8 @@ int shmem_zero_setup(struct vm_area_stru
if (IS_ERR(file))
return PTR_ERR(file);
@@ -148971,7 +148971,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
+
--- a/scripts/mkuboot.sh
+++ b/scripts/mkuboot.sh
-@@ -11,7 +11,7 @@
+@@ -11,7 +11,7 @@ if [ -z "${MKIMAGE}" ]; then
if [ -z "${MKIMAGE}" ]; then
# Doesn't exist
echo '"mkimage" command not found - U-Boot images will not be built' >&2
@@ -148982,7 +148982,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
--- a/sound/soc/codecs/wm8753.c
+++ b/sound/soc/codecs/wm8753.c
-@@ -1584,6 +1584,9 @@
+@@ -1584,6 +1584,9 @@ static int wm8753_init(struct snd_soc_de
schedule_delayed_work(&codec->delayed_work,
msecs_to_jiffies(caps_charge));
@@ -148992,7 +148992,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/* set the update bits */
reg = wm8753_read_reg_cache(codec, WM8753_LDAC);
wm8753_write(codec, WM8753_LDAC, reg | 0x0100);
-@@ -1644,17 +1647,20 @@
+@@ -1644,17 +1647,20 @@ static int wm8753_i2c_probe(struct i2c_c
struct snd_soc_codec *codec = socdev->codec;
int ret;
@@ -149015,7 +149015,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
{
struct snd_soc_codec *codec = i2c_get_clientdata(client);
kfree(codec->reg_cache);
-@@ -1675,6 +1681,7 @@
+@@ -1675,6 +1681,7 @@ static struct i2c_driver wm8753_i2c_driv
.probe = wm8753_i2c_probe,
.remove = wm8753_i2c_remove,
.id_table = wm8753_i2c_id,
@@ -149023,7 +149023,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
};
static int wm8753_add_i2c_device(struct platform_device *pdev,
-@@ -1716,6 +1723,8 @@
+@@ -1716,6 +1723,8 @@ err_driver:
i2c_del_driver(&wm8753_i2c_driver);
return -ENODEV;
}
@@ -149032,7 +149032,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#endif
#if defined(CONFIG_SPI_MASTER)
-@@ -1783,7 +1792,7 @@
+@@ -1783,7 +1792,7 @@ static int wm8753_probe(struct platform_
struct wm8753_priv *wm8753;
int ret = 0;
@@ -149041,7 +149041,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
setup = socdev->codec_data;
codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
-@@ -1820,6 +1829,7 @@
+@@ -1820,6 +1829,7 @@ static int wm8753_probe(struct platform_
#endif
if (ret != 0) {
@@ -149049,7 +149049,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
kfree(codec->private_data);
kfree(codec);
}
-@@ -1857,7 +1867,6 @@
+@@ -1857,7 +1867,6 @@ static int wm8753_remove(struct platform
snd_soc_free_pcms(socdev);
snd_soc_dapm_free(socdev);
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
@@ -149059,7 +149059,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#if defined(CONFIG_SPI_MASTER)
--- a/sound/soc/s3c24xx/Kconfig
+++ b/sound/soc/s3c24xx/Kconfig
-@@ -26,6 +26,15 @@
+@@ -26,6 +26,15 @@ config SND_S3C24XX_SOC_NEO1973_WM8753
Say Y if you want to add support for SoC audio on smdk2440
with the WM8753.
@@ -149077,7 +149077,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
depends on SND_S3C24XX_SOC && MACH_SMDK2443
--- a/sound/soc/s3c24xx/Makefile
+++ b/sound/soc/s3c24xx/Makefile
-@@ -13,7 +13,10 @@
+@@ -13,7 +13,10 @@ obj-$(CONFIG_SND_S3C2412_SOC_I2S) += snd
snd-soc-neo1973-wm8753-objs := neo1973_wm8753.o
snd-soc-smdk2443-wm9710-objs := smdk2443_wm9710.o
snd-soc-ln2440sbc-alc650-objs := ln2440sbc_alc650.o
@@ -149775,7 +149775,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#include <asm/plat-s3c24xx/regs-iis.h>
#include "../codecs/wm8753.h"
-@@ -585,7 +585,7 @@
+@@ -585,7 +585,7 @@ static struct snd_soc_machine neo1973 =
.num_links = ARRAY_SIZE(neo1973_dai),
};
@@ -149784,7 +149784,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
.i2c_bus = 0,
.i2c_address = 0x1a,
};
-@@ -594,7 +594,7 @@
+@@ -594,7 +594,7 @@ static struct snd_soc_device neo1973_snd
.machine = &neo1973,
.platform = &s3c24xx_soc_platform,
.codec_dev = &soc_codec_dev_wm8753,
@@ -149793,7 +149793,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
};
static int lm4857_i2c_probe(struct i2c_client *client,
-@@ -676,7 +676,7 @@
+@@ -676,7 +676,7 @@ static int __init neo1973_init(void)
{
int ret;
@@ -149815,7 +149815,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
#include <mach/audio.h>
--- a/sound/soc/s3c24xx/s3c24xx-i2s.c
+++ b/sound/soc/s3c24xx/s3c24xx-i2s.c
-@@ -175,7 +175,7 @@
+@@ -175,7 +175,7 @@ static void s3c24xx_snd_rxctrl(int on)
static int s3c24xx_snd_lrsync(void)
{
u32 iiscon;
@@ -149824,7 +149824,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
DBG("Entered %s\n", __func__);
-@@ -282,11 +282,14 @@
+@@ -282,11 +282,14 @@ static int s3c24xx_i2s_trigger(struct sn
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
@@ -149844,7 +149844,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
s3c24xx_snd_rxctrl(1);
-@@ -306,7 +309,6 @@
+@@ -306,7 +309,6 @@ static int s3c24xx_i2s_trigger(struct sn
break;
}
@@ -149854,7 +149854,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
--- a/sound/soc/s3c24xx/s3c24xx-pcm.c
+++ b/sound/soc/s3c24xx/s3c24xx-pcm.c
-@@ -168,7 +168,7 @@
+@@ -168,7 +168,7 @@ static int s3c24xx_pcm_hw_params(struct
prtd->params->client, NULL);
if (ret < 0) {
@@ -149865,7 +149865,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
}
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
-@@ -1003,6 +1003,38 @@
+@@ -1003,6 +1003,38 @@ static ssize_t codec_reg_show(struct dev
}
static DEVICE_ATTR(codec_reg, 0444, codec_reg_show, NULL);
@@ -149904,7 +149904,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
/**
* snd_soc_new_ac97_codec - initailise AC97 device
* @codec: audio codec
-@@ -1218,6 +1250,9 @@
+@@ -1218,6 +1250,9 @@ int snd_soc_register_card(struct snd_soc
mutex_unlock(&codec->mutex);
@@ -149916,7 +149916,7 @@ mb@homer Thu Jan 1 22:58:51 UTC 2009
}
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
-@@ -1525,6 +1525,56 @@
+@@ -1525,6 +1525,56 @@ int snd_soc_dapm_get_pin_status(struct s
EXPORT_SYMBOL_GPL(snd_soc_dapm_get_pin_status);
/**
diff --git a/target/linux/s3c24xx/patches-2.6.28/005-dont-suspend-regulator.patch b/target/linux/s3c24xx/patches-2.6.28/005-dont-suspend-regulator.patch
index 12204c847b..ac51ce3d63 100644
--- a/target/linux/s3c24xx/patches-2.6.28/005-dont-suspend-regulator.patch
+++ b/target/linux/s3c24xx/patches-2.6.28/005-dont-suspend-regulator.patch
@@ -15,8 +15,6 @@ gets rid of the regulator related backtrace seen upon resume.
Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
---
-diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c
-index 422dea2..889f191 100644
--- a/arch/arm/plat-s3c/pm.c
+++ b/arch/arm/plat-s3c/pm.c
@@ -18,7 +18,6 @@
@@ -50,11 +48,9 @@ index 422dea2..889f191 100644
};
/* s3c_pm_init
-diff --git a/drivers/regulator/pcf50633-regulator.c b/drivers/regulator/pcf50633-regulator.c
-index 343f43e..d284200 100644
--- a/drivers/regulator/pcf50633-regulator.c
+++ b/drivers/regulator/pcf50633-regulator.c
-@@ -249,8 +249,6 @@ struct regulator_ops pcf50633_regulator_ops = {
+@@ -249,8 +249,6 @@ struct regulator_ops pcf50633_regulator_
.enable = pcf50633_regulator_enable,
.disable = pcf50633_regulator_disable,
.is_enabled = pcf50633_regulator_is_enabled,
diff --git a/target/linux/s3c24xx/patches-2.6.28/010-preserve-resolution.patch b/target/linux/s3c24xx/patches-2.6.28/010-preserve-resolution.patch
index 6beff0d7bb..01eddb7cfd 100644
--- a/target/linux/s3c24xx/patches-2.6.28/010-preserve-resolution.patch
+++ b/target/linux/s3c24xx/patches-2.6.28/010-preserve-resolution.patch
@@ -1,8 +1,6 @@
-diff --git a/drivers/video/display/jbt6k74.c b/drivers/video/display/jbt6k74.c
-index a1d48dd..2ca1bd4 100644
--- a/drivers/video/display/jbt6k74.c
+++ b/drivers/video/display/jbt6k74.c
-@@ -443,8 +443,17 @@ int jbt6k74_enter_state(struct jbt_info *jbt, enum jbt_state new_state)
+@@ -443,8 +443,17 @@ int jbt6k74_enter_state(struct jbt_info
break;
}
@@ -21,7 +19,7 @@ index a1d48dd..2ca1bd4 100644
return rc;
}
-@@ -595,7 +604,14 @@ static int fb_notifier_callback(struct notifier_block *self,
+@@ -595,7 +604,14 @@ static int fb_notifier_callback(struct n
switch (fb_blank) {
case FB_BLANK_UNBLANK:
dev_info(&jbt->spi_dev->dev, "**** jbt6k74 unblank\n");
@@ -37,7 +35,7 @@ index a1d48dd..2ca1bd4 100644
break;
case FB_BLANK_NORMAL:
dev_info(&jbt->spi_dev->dev, "**** jbt6k74 normal\n");
-@@ -720,8 +736,6 @@ static int jbt_suspend(struct spi_device *spi, pm_message_t state)
+@@ -720,8 +736,6 @@ static int jbt_suspend(struct spi_device
{
struct jbt_info *jbt = dev_get_drvdata(&spi->dev);