aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/s3c24xx/patches/0215-add-limit-sdcard-clk-cmdline.patch.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/s3c24xx/patches/0215-add-limit-sdcard-clk-cmdline.patch.patch')
-rwxr-xr-xtarget/linux/s3c24xx/patches/0215-add-limit-sdcard-clk-cmdline.patch.patch109
1 files changed, 109 insertions, 0 deletions
diff --git a/target/linux/s3c24xx/patches/0215-add-limit-sdcard-clk-cmdline.patch.patch b/target/linux/s3c24xx/patches/0215-add-limit-sdcard-clk-cmdline.patch.patch
new file mode 100755
index 0000000000..8fc609da17
--- /dev/null
+++ b/target/linux/s3c24xx/patches/0215-add-limit-sdcard-clk-cmdline.patch.patch
@@ -0,0 +1,109 @@
+From 96f9902ff40b2124fbe34eeac727c596e7701702 Mon Sep 17 00:00:00 2001
+From: Andy Green <andy@openmoko.com>
+Date: Fri, 25 Jul 2008 23:06:20 +0100
+Subject: [PATCH] add-limit-sdcard-clk-cmdline.patch
+
+This patch allows you to control the maximum clock rate that will
+be selected for SD Card access, from the kernel commandline using
+
+ glamo_mci.sd_max_clk=10000000
+
+and also from
+
+ echo 10000000 > /sys/module/glamo_mci/parameters/sd_max_clk
+
+although you have to suspend and resume to make the limit operational
+on the actual SD_CLK line.
+
+Clocks that are possible are divided down from ~50MHz, so 25000000,
+16666666, 12500000, 10000000, etc. With Freerunner A5 revision that
+has 100R series resistors in SD Card signals, I didn't get reliable
+operation above 16MHz. With A6 revision the series resistors went
+down to 75R, maybe it can work at 25MHz.
+
+Reducing the clock rate is something to try if you find that your
+SD Card is not communicating properly with the default speed.
+
+Signed-off-by: Andy Green <andy@openmoko.com>
+---
+ drivers/mfd/glamo/glamo-mci.c | 38 +++++++++++++++++++++++++++++---------
+ 1 files changed, 29 insertions(+), 9 deletions(-)
+
+diff --git a/drivers/mfd/glamo/glamo-mci.c b/drivers/mfd/glamo/glamo-mci.c
+index b53827e..67bb815 100644
+--- a/drivers/mfd/glamo/glamo-mci.c
++++ b/drivers/mfd/glamo/glamo-mci.c
+@@ -40,6 +40,24 @@ static spinlock_t clock_lock;
+
+ static void glamo_mci_send_request(struct mmc_host *mmc);
+
++/*
++ * Max SD clock rate
++ *
++ * held at /(3 + 1) due to concerns of 100R recommended series resistor
++ * allows 16MHz @ 4-bit --> 8MBytes/sec raw
++ *
++ * you can override this on kernel commandline using
++ *
++ * glamo_mci.sd_max_clk=10000000
++ *
++ * for example
++ */
++
++static int sd_max_clk = 50000000 / 3;
++module_param(sd_max_clk, int, 0644);
++
++
++
+ unsigned char CRC7(u8 * pu8, int cnt)
+ {
+ u8 crc = 0;
+@@ -676,9 +694,9 @@ static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+ (ios->power_mode == MMC_POWER_UP)) {
+ dev_info(&host->pdev->dev,
+ "powered (vdd = %d) clk: %lukHz div=%d (req: %ukHz). "
+- "Bus width=%d\n",ios->vdd,
+- host->real_rate / 1000, host->real_rate,
+- ios->clock / 1000, ios->bus_width);
++ "Bus width=%d\n",(int)ios->vdd,
++ host->real_rate / 1000, (int)host->clk_div,
++ ios->clock / 1000, (int)ios->bus_width);
+ } else
+ dev_info(&host->pdev->dev, "glamo_mci_set_ios: power down.\n");
+
+@@ -800,11 +818,7 @@ static int glamo_mci_probe(struct platform_device *pdev)
+ MMC_CAP_MMC_HIGHSPEED |
+ MMC_CAP_SD_HIGHSPEED;
+ mmc->f_min = host->clk_rate / 256;
+- /*
+- * held at /4 due to concerns of 100R recommended series resistor
+- * allows 16MHz @ 4-bit --> 8MBytes/sec raw
+- */
+- mmc->f_max = host->clk_rate / 3;
++ mmc->f_max = sd_max_clk;
+
+ mmc->max_blk_count = (1 << 16) - 1; /* GLAMO_REG_MMC_RB_BLKCNT */
+ mmc->max_blk_size = (1 << 12) - 1; /* GLAMO_REG_MMC_RB_BLKLEN */
+@@ -866,12 +880,18 @@ static int glamo_mci_suspend(struct platform_device *dev, pm_message_t state)
+ {
+ struct mmc_host *mmc = platform_get_drvdata(dev);
+ struct glamo_mci_host *host = mmc_priv(mmc);
++ int ret;
+
+ host->suspending++;
+ if (host->pdata->mci_all_dependencies_resumed)
+ (host->pdata->mci_suspending)(dev);
+
+- return mmc_suspend_host(mmc, state);
++ ret = mmc_suspend_host(mmc, state);
++
++ /* so that when we resume, we use any modified max rate */
++ mmc->f_max = sd_max_clk;
++
++ return ret;
+ }
+
+ int glamo_mci_resume(struct platform_device *dev)
+--
+1.5.6.3
+