diff options
Diffstat (limited to 'target/linux/s3c24xx/patches-2.6.24/1325-fix-missing-new-files-glofiish.patch.patch')
| -rw-r--r-- | target/linux/s3c24xx/patches-2.6.24/1325-fix-missing-new-files-glofiish.patch.patch | 2764 |
1 files changed, 2764 insertions, 0 deletions
diff --git a/target/linux/s3c24xx/patches-2.6.24/1325-fix-missing-new-files-glofiish.patch.patch b/target/linux/s3c24xx/patches-2.6.24/1325-fix-missing-new-files-glofiish.patch.patch new file mode 100644 index 0000000000..bcf912af59 --- /dev/null +++ b/target/linux/s3c24xx/patches-2.6.24/1325-fix-missing-new-files-glofiish.patch.patch @@ -0,0 +1,2764 @@ +From 3f12f6b0b863453038bc4b7435b5bab06be30f45 Mon Sep 17 00:00:00 2001 +From: Andy Green <andy@openmoko.com> +Date: Tue, 18 Nov 2008 12:11:13 +0000 +Subject: [PATCH] fix-missing-new-files-glofiish.patch + +Add in uncommitted local files after Harald's patch + +Reported-by: Stefan Schmidt <stefan@openmoko.org> +Signed-off-by: Andy Green <andy@openmoko.com> +--- + arch/arm/configs/glofiish_defconfig | 1728 +++++++++++++++++++++++++++++++ + arch/arm/mach-s3c2440/mach-glofiish.c | 620 +++++++++++ + drivers/input/keyboard/m800kbd.c | 330 ++++++ + include/asm-arm/arch-s3c2410/glofiish.h | 39 + + 4 files changed, 2717 insertions(+), 0 deletions(-) + create mode 100644 arch/arm/configs/glofiish_defconfig + create mode 100644 arch/arm/mach-s3c2440/mach-glofiish.c + create mode 100644 drivers/input/keyboard/m800kbd.c + create mode 100644 include/asm-arm/arch-s3c2410/glofiish.h + +diff --git a/arch/arm/configs/glofiish_defconfig b/arch/arm/configs/glofiish_defconfig +new file mode 100644 +index 0000000..808d61f +--- /dev/null ++++ b/arch/arm/configs/glofiish_defconfig +@@ -0,0 +1,1728 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.24 ++# Wed Nov 12 00:27:24 2008 ++# ++CONFIG_ARM=y ++CONFIG_SYS_SUPPORTS_APM_EMULATION=y ++CONFIG_GENERIC_GPIO=y ++# CONFIG_GENERIC_TIME is not set ++# CONFIG_GENERIC_CLOCKEVENTS is not set ++CONFIG_MMU=y ++CONFIG_NO_IOPORT=y ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_STACKTRACE_SUPPORT=y ++CONFIG_LOCKDEP_SUPPORT=y ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++CONFIG_HARDIRQS_SW_RESEND=y ++CONFIG_GENERIC_IRQ_PROBE=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_ZONE_DMA=y ++CONFIG_VECTORS_BASE=0xffff0000 ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# General setup ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_LOCK_KERNEL=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++CONFIG_LOCALVERSION="" ++# CONFIG_LOCALVERSION_AUTO is not set ++CONFIG_SWAP=y ++CONFIG_SYSVIPC=y ++CONFIG_SYSVIPC_SYSCTL=y ++# CONFIG_POSIX_MQUEUE is not set ++# CONFIG_BSD_PROCESS_ACCT is not set ++# CONFIG_TASKSTATS is not set ++# CONFIG_USER_NS is not set ++# CONFIG_PID_NS is not set ++# CONFIG_AUDIT is not set ++# CONFIG_IKCONFIG is not set ++CONFIG_LOG_BUF_SHIFT=14 ++# CONFIG_CGROUPS is not set ++# CONFIG_FAIR_GROUP_SCHED is not set ++# CONFIG_SYSFS_DEPRECATED is not set ++# CONFIG_RELAY is not set ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="" ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SYSCTL=y ++# CONFIG_EMBEDDED is not set ++CONFIG_UID16=y ++CONFIG_SYSCTL_SYSCALL=y ++CONFIG_KALLSYMS=y ++# CONFIG_KALLSYMS_ALL is not set ++# CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_ANON_INODES=y ++CONFIG_EPOLL=y ++CONFIG_SIGNALFD=y ++CONFIG_EVENTFD=y ++CONFIG_SHMEM=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_SLAB=y ++# CONFIG_SLUB is not set ++# CONFIG_SLOB is not set ++CONFIG_SLABINFO=y ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=0 ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++CONFIG_MODULE_FORCE_UNLOAD=y ++# CONFIG_MODVERSIONS is not set ++# CONFIG_MODULE_SRCVERSION_ALL is not set ++CONFIG_KMOD=y ++CONFIG_BLOCK=y ++# CONFIG_LBD is not set ++# CONFIG_BLK_DEV_IO_TRACE is not set ++# CONFIG_LSF is not set ++# CONFIG_BLK_DEV_BSG is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=m ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=m ++# CONFIG_DEFAULT_AS is not set ++CONFIG_DEFAULT_DEADLINE=y ++# CONFIG_DEFAULT_CFQ is not set ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="deadline" ++ ++# ++# System Type ++# ++# CONFIG_ARCH_AAEC2000 is not set ++# CONFIG_ARCH_INTEGRATOR is not set ++# CONFIG_ARCH_REALVIEW is not set ++# CONFIG_ARCH_VERSATILE is not set ++# CONFIG_ARCH_AT91 is not set ++# CONFIG_ARCH_CLPS7500 is not set ++# CONFIG_ARCH_CLPS711X is not set ++# CONFIG_ARCH_CO285 is not set ++# CONFIG_ARCH_EBSA110 is not set ++# CONFIG_ARCH_EP93XX is not set ++# CONFIG_ARCH_FOOTBRIDGE is not set ++# CONFIG_ARCH_NETX is not set ++# CONFIG_ARCH_H720X is not set ++# CONFIG_ARCH_IMX is not set ++# CONFIG_ARCH_IOP13XX is not set ++# CONFIG_ARCH_IOP32X is not set ++# CONFIG_ARCH_IOP33X is not set ++# CONFIG_ARCH_IXP23XX is not set ++# CONFIG_ARCH_IXP2000 is not set ++# CONFIG_ARCH_IXP4XX is not set ++# CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_KS8695 is not set ++# CONFIG_ARCH_NS9XXX is not set ++# CONFIG_ARCH_MXC is not set ++# CONFIG_ARCH_PNX4008 is not set ++# CONFIG_ARCH_PXA is not set ++# CONFIG_ARCH_RPC is not set ++# CONFIG_ARCH_SA1100 is not set ++CONFIG_ARCH_S3C2410=y ++# CONFIG_ARCH_SHARK is not set ++# CONFIG_ARCH_LH7A40X is not set ++# CONFIG_ARCH_DAVINCI is not set ++# CONFIG_ARCH_OMAP is not set ++CONFIG_PLAT_S3C24XX=y ++CONFIG_CPU_S3C244X=y ++CONFIG_S3C2410_DMA=y ++# CONFIG_S3C2410_DMA_DEBUG is not set ++CONFIG_MACH_SMDK=y ++CONFIG_PLAT_S3C=y ++CONFIG_CPU_LLSERIAL_S3C2410=y ++CONFIG_CPU_LLSERIAL_S3C2440=y ++ ++# ++# Boot options ++# ++# CONFIG_S3C_BOOT_WATCHDOG is not set ++# CONFIG_S3C_BOOT_ERROR_RESET is not set ++ ++# ++# Power management ++# ++# CONFIG_S3C2410_PM_CHECK is not set ++CONFIG_S3C_LOWLEVEL_UART_PORT=2 ++ ++# ++# S3C2400 Machines ++# ++CONFIG_CPU_S3C2410=y ++CONFIG_CPU_S3C2410_DMA=y ++CONFIG_S3C2410_PM=y ++CONFIG_S3C2410_GPIO=y ++CONFIG_S3C2410_CLOCK=y ++CONFIG_S3C2410_PWM=y ++ ++# ++# S3C2410 Machines ++# ++# CONFIG_ARCH_SMDK2410 is not set ++# CONFIG_ARCH_H1940 is not set ++# CONFIG_MACH_N30 is not set ++# CONFIG_ARCH_BAST is not set ++# CONFIG_MACH_OTOM is not set ++# CONFIG_MACH_AML_M5900 is not set ++# CONFIG_MACH_VR1000 is not set ++CONFIG_MACH_QT2410=y ++# CONFIG_MACH_NEO1973_GTA01 is not set ++ ++# ++# S3C2412 Machines ++# ++# CONFIG_MACH_SMDK2413 is not set ++# CONFIG_MACH_SMDK2412 is not set ++# CONFIG_MACH_VSTMS is not set ++CONFIG_CPU_S3C2440=y ++CONFIG_S3C2440_DMA=y ++# CONFIG_S3C2440_C_FIQ is not set ++ ++# ++# S3C2440 Machines ++# ++# CONFIG_MACH_ANUBIS is not set ++# CONFIG_MACH_OSIRIS is not set ++# CONFIG_MACH_RX3715 is not set ++CONFIG_ARCH_S3C2440=y ++# CONFIG_MACH_NEXCODER_2440 is not set ++CONFIG_SMDK2440_CPU2440=y ++# CONFIG_MACH_HXD8 is not set ++# CONFIG_MACH_NEO1973_GTA02 is not set ++CONFIG_MACH_M800=y ++CONFIG_CPU_S3C2442=y ++ ++# ++# S3C2442 Machines ++# ++CONFIG_SMDK2440_CPU2442=y ++ ++# ++# S3C2443 Machines ++# ++# CONFIG_MACH_SMDK2443 is not set ++ ++# ++# Processor Type ++# ++CONFIG_CPU_32=y ++CONFIG_CPU_ARM920T=y ++CONFIG_CPU_32v4T=y ++CONFIG_CPU_ABRT_EV4T=y ++CONFIG_CPU_CACHE_V4WT=y ++CONFIG_CPU_CACHE_VIVT=y ++CONFIG_CPU_COPY_V4WB=y ++CONFIG_CPU_TLB_V4WBI=y ++CONFIG_CPU_CP15=y ++CONFIG_CPU_CP15_MMU=y ++ ++# ++# Processor Features ++# ++CONFIG_ARM_THUMB=y ++# CONFIG_CPU_ICACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set ++# CONFIG_OUTER_CACHE is not set ++ ++# ++# Bus support ++# ++# CONFIG_PCI_SYSCALL is not set ++# CONFIG_ARCH_SUPPORTS_MSI is not set ++# CONFIG_PCCARD is not set ++ ++# ++# Kernel Features ++# ++# CONFIG_TICK_ONESHOT is not set ++CONFIG_PREEMPT=y ++CONFIG_NO_IDLE_HZ=y ++CONFIG_HZ=200 ++CONFIG_AEABI=y ++CONFIG_OABI_COMPAT=y ++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++# CONFIG_SPARSEMEM_STATIC is not set ++# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set ++CONFIG_SPLIT_PTLOCK_CPUS=4096 ++# CONFIG_RESOURCES_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=1 ++CONFIG_BOUNCE=y ++CONFIG_VIRT_TO_BUS=y ++CONFIG_ALIGNMENT_TRAP=y ++ ++# ++# Boot options ++# ++CONFIG_ZBOOT_ROM_TEXT=0x0 ++CONFIG_ZBOOT_ROM_BSS=0x0 ++CONFIG_CMDLINE="root=/dev/mmcblk0p1 rootdelay=5" ++# CONFIG_XIP_KERNEL is not set ++CONFIG_KEXEC=y ++CONFIG_ATAGS_PROC=y ++ ++# ++# Floating point emulation ++# ++ ++# ++# At least one emulation must be selected ++# ++CONFIG_FPE_NWFPE=y ++# CONFIG_FPE_NWFPE_XP is not set ++# CONFIG_FPE_FASTFPE is not set ++ ++# ++# Userspace binary formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_BINFMT_AOUT is not set ++# CONFIG_BINFMT_MISC is not set ++ ++# ++# Power management options ++# ++CONFIG_PM=y ++CONFIG_PM_LEGACY=y ++CONFIG_PM_DEBUG=y ++# CONFIG_PM_VERBOSE is not set ++CONFIG_PM_SLEEP=y ++CONFIG_SUSPEND_UP_POSSIBLE=y ++CONFIG_SUSPEND=y ++CONFIG_APM_EMULATION=y ++ ++# ++# Networking ++# ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++CONFIG_PACKET=y ++CONFIG_PACKET_MMAP=y ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++# CONFIG_XFRM_USER is not set ++# CONFIG_XFRM_SUB_POLICY is not set ++CONFIG_XFRM_MIGRATE=y ++CONFIG_NET_KEY=m ++CONFIG_NET_KEY_MIGRATE=y ++CONFIG_INET=y ++CONFIG_IP_MULTICAST=y ++CONFIG_IP_ADVANCED_ROUTER=y ++CONFIG_ASK_IP_FIB_HASH=y ++# CONFIG_IP_FIB_TRIE is not set ++CONFIG_IP_FIB_HASH=y ++CONFIG_IP_MULTIPLE_TABLES=y ++# CONFIG_IP_ROUTE_MULTIPATH is not set ++# CONFIG_IP_ROUTE_VERBOSE is not set ++CONFIG_IP_PNP=y ++CONFIG_IP_PNP_DHCP=y ++# CONFIG_IP_PNP_BOOTP is not set ++# CONFIG_IP_PNP_RARP is not set ++CONFIG_NET_IPIP=m ++CONFIG_NET_IPGRE=m ++# CONFIG_NET_IPGRE_BROADCAST is not set ++# CONFIG_IP_MROUTE is not set ++# CONFIG_ARPD is not set ++CONFIG_SYN_COOKIES=y ++CONFIG_INET_AH=m ++CONFIG_INET_ESP=m ++CONFIG_INET_IPCOMP=m ++CONFIG_INET_XFRM_TUNNEL=m ++CONFIG_INET_TUNNEL=m ++CONFIG_INET_XFRM_MODE_TRANSPORT=m ++CONFIG_INET_XFRM_MODE_TUNNEL=m ++CONFIG_INET_XFRM_MODE_BEET=m ++# CONFIG_INET_LRO is not set ++CONFIG_INET_DIAG=y ++CONFIG_INET_TCP_DIAG=y ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_CUBIC=y ++CONFIG_DEFAULT_TCP_CONG="cubic" ++CONFIG_TCP_MD5SIG=y ++# CONFIG_IP_VS is not set ++CONFIG_IPV6=m ++# CONFIG_IPV6_PRIVACY is not set ++# CONFIG_IPV6_ROUTER_PREF is not set ++# CONFIG_IPV6_OPTIMISTIC_DAD is not set ++CONFIG_INET6_AH=m ++CONFIG_INET6_ESP=m ++CONFIG_INET6_IPCOMP=m ++# CONFIG_IPV6_MIP6 is not set ++CONFIG_INET6_XFRM_TUNNEL=m ++CONFIG_INET6_TUNNEL=m ++CONFIG_INET6_XFRM_MODE_TRANSPORT=m ++CONFIG_INET6_XFRM_MODE_TUNNEL=m ++CONFIG_INET6_XFRM_MODE_BEET=m ++# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set ++CONFIG_IPV6_SIT=m ++CONFIG_IPV6_TUNNEL=m ++# CONFIG_IPV6_MULTIPLE_TABLES is not set ++# CONFIG_NETWORK_SECMARK is not set ++CONFIG_NETFILTER=y ++# CONFIG_NETFILTER_DEBUG is not set ++ ++# ++# Core Netfilter Configuration ++# ++CONFIG_NETFILTER_NETLINK=m ++CONFIG_NETFILTER_NETLINK_QUEUE=m ++CONFIG_NETFILTER_NETLINK_LOG=m ++CONFIG_NF_CONNTRACK_ENABLED=m ++CONFIG_NF_CONNTRACK=m ++CONFIG_NF_CT_ACCT=y ++CONFIG_NF_CONNTRACK_MARK=y ++CONFIG_NF_CONNTRACK_EVENTS=y ++CONFIG_NF_CT_PROTO_GRE=m ++CONFIG_NF_CT_PROTO_SCTP=m ++# CONFIG_NF_CT_PROTO_UDPLITE is not set ++# CONFIG_NF_CONNTRACK_AMANDA is not set ++CONFIG_NF_CONNTRACK_FTP=m ++CONFIG_NF_CONNTRACK_H323=m ++CONFIG_NF_CONNTRACK_IRC=m ++CONFIG_NF_CONNTRACK_NETBIOS_NS=m ++CONFIG_NF_CONNTRACK_PPTP=m ++CONFIG_NF_CONNTRACK_SANE=m ++CONFIG_NF_CONNTRACK_SIP=m ++CONFIG_NF_CONNTRACK_TFTP=m ++CONFIG_NF_CT_NETLINK=m ++CONFIG_NETFILTER_XTABLES=m ++CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m ++CONFIG_NETFILTER_XT_TARGET_CONNMARK=m ++CONFIG_NETFILTER_XT_TARGET_DSCP=m ++CONFIG_NETFILTER_XT_TARGET_MARK=m ++CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m ++CONFIG_NETFILTER_XT_TARGET_NFLOG=m ++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m ++# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set ++CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m ++# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set ++CONFIG_NETFILTER_XT_MATCH_CONNMARK=m ++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m ++CONFIG_NETFILTER_XT_MATCH_DCCP=m ++CONFIG_NETFILTER_XT_MATCH_DSCP=m ++CONFIG_NETFILTER_XT_MATCH_ESP=m ++CONFIG_NETFILTER_XT_MATCH_HELPER=m ++CONFIG_NETFILTER_XT_MATCH_LENGTH=m ++CONFIG_NETFILTER_XT_MATCH_LIMIT=m ++CONFIG_NETFILTER_XT_MATCH_MAC=m ++CONFIG_NETFILTER_XT_MATCH_MARK=m ++CONFIG_NETFILTER_XT_MATCH_POLICY=m ++CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m ++CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m ++CONFIG_NETFILTER_XT_MATCH_QUOTA=m ++CONFIG_NETFILTER_XT_MATCH_REALM=m ++CONFIG_NETFILTER_XT_MATCH_SCTP=m ++CONFIG_NETFILTER_XT_MATCH_STATE=m ++CONFIG_NETFILTER_XT_MATCH_STATISTIC=m ++CONFIG_NETFILTER_XT_MATCH_STRING=m ++CONFIG_NETFILTER_XT_MATCH_TCPMSS=m ++# CONFIG_NETFILTER_XT_MATCH_TIME is not set ++# CONFIG_NETFILTER_XT_MATCH_U32 is not set ++CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m ++ ++# ++# IP: Netfilter Configuration ++# ++CONFIG_NF_CONNTRACK_IPV4=m ++CONFIG_NF_CONNTRACK_PROC_COMPAT=y ++# CONFIG_IP_NF_QUEUE is not set ++CONFIG_IP_NF_IPTABLES=m ++CONFIG_IP_NF_MATCH_IPRANGE=m ++CONFIG_IP_NF_MATCH_TOS=m ++# CONFIG_IP_NF_MATCH_RECENT is not set ++CONFIG_IP_NF_MATCH_ECN=m ++CONFIG_IP_NF_MATCH_AH=m ++CONFIG_IP_NF_MATCH_TTL=m ++CONFIG_IP_NF_MATCH_OWNER=m ++CONFIG_IP_NF_MATCH_ADDRTYPE=m ++CONFIG_IP_NF_FILTER=m ++CONFIG_IP_NF_TARGET_REJECT=m ++CONFIG_IP_NF_TARGET_LOG=m ++CONFIG_IP_NF_TARGET_ULOG=m ++CONFIG_NF_NAT=m ++CONFIG_NF_NAT_NEEDED=y ++CONFIG_IP_NF_TARGET_MASQUERADE=m ++CONFIG_IP_NF_TARGET_REDIRECT=m ++CONFIG_IP_NF_TARGET_NETMAP=m ++CONFIG_IP_NF_TARGET_SAME=m ++CONFIG_NF_NAT_SNMP_BASIC=m ++CONFIG_NF_NAT_PROTO_GRE=m ++CONFIG_NF_NAT_FTP=m ++CONFIG_NF_NAT_IRC=m ++CONFIG_NF_NAT_TFTP=m ++# CONFIG_NF_NAT_AMANDA is not set ++CONFIG_NF_NAT_PPTP=m ++CONFIG_NF_NAT_H323=m ++CONFIG_NF_NAT_SIP=m ++CONFIG_IP_NF_MANGLE=m ++CONFIG_IP_NF_TARGET_TOS=m ++CONFIG_IP_NF_TARGET_ECN=m ++CONFIG_IP_NF_TARGET_TTL=m ++CONFIG_IP_NF_TARGET_CLUSTERIP=m ++# CONFIG_IP_NF_RAW is not set ++# CONFIG_IP_NF_ARPTABLES is not set ++ ++# ++# IPv6: Netfilter Configuration (EXPERIMENTAL) ++# ++CONFIG_NF_CONNTRACK_IPV6=m ++# CONFIG_IP6_NF_QUEUE is not set ++CONFIG_IP6_NF_IPTABLES=m ++CONFIG_IP6_NF_MATCH_RT=m ++CONFIG_IP6_NF_MATCH_OPTS=m ++CONFIG_IP6_NF_MATCH_FRAG=m ++CONFIG_IP6_NF_MATCH_HL=m ++CONFIG_IP6_NF_MATCH_OWNER=m ++CONFIG_IP6_NF_MATCH_IPV6HEADER=m ++CONFIG_IP6_NF_MATCH_AH=m ++CONFIG_IP6_NF_MATCH_MH=m ++CONFIG_IP6_NF_MATCH_EUI64=m ++CONFIG_IP6_NF_FILTER=m ++CONFIG_IP6_NF_TARGET_LOG=m ++CONFIG_IP6_NF_TARGET_REJECT=m ++CONFIG_IP6_NF_MANGLE=m ++CONFIG_IP6_NF_TARGET_HL=m ++# CONFIG_IP6_NF_RAW is not set ++# CONFIG_IP_DCCP is not set ++# CONFIG_IP_SCTP is not set ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++CONFIG_NET_SCHED=y ++ ++# ++# Queueing/Scheduling ++# ++CONFIG_NET_SCH_CBQ=m ++CONFIG_NET_SCH_HTB=m ++CONFIG_NET_SCH_HFSC=m ++CONFIG_NET_SCH_PRIO=m ++# CONFIG_NET_SCH_RR is not set ++CONFIG_NET_SCH_RED=m ++CONFIG_NET_SCH_SFQ=m ++CONFIG_NET_SCH_TEQL=m ++CONFIG_NET_SCH_TBF=m ++CONFIG_NET_SCH_GRED=m ++CONFIG_NET_SCH_DSMARK=m ++CONFIG_NET_SCH_NETEM=m ++CONFIG_NET_SCH_INGRESS=m ++ ++# ++# Classification ++# ++CONFIG_NET_CLS=y ++CONFIG_NET_CLS_BASIC=m ++CONFIG_NET_CLS_TCINDEX=m ++CONFIG_NET_CLS_ROUTE4=m ++CONFIG_NET_CLS_ROUTE=y ++CONFIG_NET_CLS_FW=m ++CONFIG_NET_CLS_U32=m ++CONFIG_CLS_U32_PERF=y ++CONFIG_CLS_U32_MARK=y ++CONFIG_NET_CLS_RSVP=m ++CONFIG_NET_CLS_RSVP6=m ++# CONFIG_NET_EMATCH is not set ++# CONFIG_NET_CLS_ACT is not set ++# CONFIG_NET_CLS_POLICE is not set ++# CONFIG_NET_CLS_IND is not set ++CONFIG_NET_SCH_FIFO=y ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_HAMRADIO is not set ++# CONFIG_IRDA is not set ++CONFIG_BT=m ++CONFIG_BT_L2CAP=m ++CONFIG_BT_SCO=m ++CONFIG_BT_RFCOMM=m ++CONFIG_BT_RFCOMM_TTY=y ++CONFIG_BT_BNEP=m ++CONFIG_BT_BNEP_MC_FILTER=y ++CONFIG_BT_BNEP_PROTO_FILTER=y ++CONFIG_BT_HIDP=m ++ ++# ++# Bluetooth device drivers ++# ++CONFIG_BT_HCIUSB=m ++CONFIG_BT_HCIUSB_SCO=y ++# CONFIG_BT_HCIBTSDIO is not set ++# CONFIG_BT_HCIUART is not set ++# CONFIG_BT_HCIBCM203X is not set ++# CONFIG_BT_HCIBPA10X is not set ++# CONFIG_BT_HCIBFUSB is not set ++# CONFIG_BT_HCIVHCI is not set ++# CONFIG_AF_RXRPC is not set ++CONFIG_FIB_RULES=y ++ ++# ++# Wireless ++# ++# CONFIG_CFG80211 is not set ++CONFIG_WIRELESS_EXT=y ++# CONFIG_MAC80211 is not set ++# CONFIG_IEEE80211 is not set ++# CONFIG_RFKILL is not set ++# CONFIG_NET_9P is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++CONFIG_FW_LOADER=m ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++CONFIG_CONNECTOR=m ++CONFIG_MTD=y ++# CONFIG_MTD_DEBUG is not set ++# CONFIG_MTD_CONCAT is not set ++CONFIG_MTD_PARTITIONS=y ++# CONFIG_MTD_REDBOOT_PARTS is not set ++CONFIG_MTD_CMDLINE_PARTS=y ++# CONFIG_MTD_AFS_PARTS is not set ++ ++# ++# User Modules And Translation Layers ++# ++CONFIG_MTD_CHAR=y ++CONFIG_MTD_BLKDEVS=y ++CONFIG_MTD_BLOCK=y ++# CONFIG_FTL is not set ++# CONFIG_NFTL is not set ++# CONFIG_INFTL is not set ++# CONFIG_RFD_FTL is not set ++# CONFIG_SSFDC is not set ++# CONFIG_MTD_OOPS is not set ++ ++# ++# RAM/ROM/Flash chip drivers ++# ++CONFIG_MTD_CFI=y ++# CONFIG_MTD_JEDECPROBE is not set ++CONFIG_MTD_GEN_PROBE=y ++# CONFIG_MTD_CFI_ADV_OPTIONS is not set ++CONFIG_MTD_MAP_BANK_WIDTH_1=y ++CONFIG_MTD_MAP_BANK_WIDTH_2=y ++CONFIG_MTD_MAP_BANK_WIDTH_4=y ++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set ++CONFIG_MTD_CFI_I1=y ++CONFIG_MTD_CFI_I2=y ++# CONFIG_MTD_CFI_I4 is not set ++# CONFIG_MTD_CFI_I8 is not set ++CONFIG_MTD_CFI_INTELEXT=y ++# CONFIG_MTD_CFI_AMDSTD is not set ++# CONFIG_MTD_CFI_STAA is not set ++CONFIG_MTD_CFI_UTIL=y ++# CONFIG_MTD_RAM is not set ++# CONFIG_MTD_ROM is not set ++CONFIG_MTD_ABSENT=y ++ ++# ++# Mapping drivers for chip access ++# ++# CONFIG_MTD_COMPLEX_MAPPINGS is not set ++CONFIG_MTD_PHYSMAP=y ++CONFIG_MTD_PHYSMAP_START=0x8000000 ++CONFIG_MTD_PHYSMAP_LEN=0 ++CONFIG_MTD_PHYSMAP_BANKWIDTH=2 ++# CONFIG_MTD_ARM_INTEGRATOR is not set ++# CONFIG_MTD_PLATRAM is not set ++ ++# ++# Self-contained MTD device drivers ++# ++# CONFIG_MTD_DATAFLASH is not set ++# CONFIG_MTD_M25P80 is not set ++# CONFIG_MTD_SLRAM is not set ++# CONFIG_MTD_PHRAM is not set ++# CONFIG_MTD_MTDRAM is not set ++# CONFIG_MTD_BLOCK2MTD is not set ++ ++# ++# Disk-On-Chip Device Drivers ++# ++# CONFIG_MTD_DOC2000 is not set ++# CONFIG_MTD_DOC2001 is not set ++# CONFIG_MTD_DOC2001PLUS is not set ++CONFIG_MTD_NAND=y ++CONFIG_MTD_NAND_VERIFY_WRITE=y ++# CONFIG_MTD_NAND_ECC_SMC is not set ++# CONFIG_MTD_NAND_MUSEUM_IDS is not set ++CONFIG_MTD_NAND_IDS=y ++CONFIG_MTD_NAND_S3C2410=y ++# CONFIG_MTD_NAND_S3C2410_DEBUG is not set ++CONFIG_MTD_NAND_S3C2410_HWECC=y ++# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set ++# CONFIG_MTD_NAND_DISKONCHIP is not set ++# CONFIG_MTD_NAND_NANDSIM is not set ++# CONFIG_MTD_NAND_PLATFORM is not set ++# CONFIG_MTD_ALAUDA is not set ++# CONFIG_MTD_ONENAND is not set ++ ++# ++# UBI - Unsorted block images ++# ++# CONFIG_MTD_UBI is not set ++# CONFIG_PARPORT is not set ++CONFIG_BLK_DEV=y ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=m ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++# CONFIG_BLK_DEV_NBD is not set ++CONFIG_BLK_DEV_UB=m ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=4096 ++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 ++# CONFIG_CDROM_PKTCDVD is not set ++# CONFIG_ATA_OVER_ETH is not set ++CONFIG_MISC_DEVICES=y ++# CONFIG_EEPROM_93CX6 is not set ++# CONFIG_IDE is not set ++ ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++CONFIG_SCSI=m ++CONFIG_SCSI_DMA=y ++# CONFIG_SCSI_TGT is not set ++# CONFIG_SCSI_NETLINK is not set ++CONFIG_SCSI_PROC_FS=y ++ ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=m ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++CONFIG_BLK_DEV_SR=m ++# CONFIG_BLK_DEV_SR_VENDOR is not set ++CONFIG_CHR_DEV_SG=m ++# CONFIG_CHR_DEV_SCH is not set ++ ++# ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs ++# ++# CONFIG_SCSI_MULTI_LUN is not set ++# CONFIG_SCSI_CONSTANTS is not set ++# CONFIG_SCSI_LOGGING is not set ++CONFIG_SCSI_SCAN_ASYNC=y ++CONFIG_SCSI_WAIT_SCAN=m ++ ++# ++# SCSI Transports ++# ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set ++# CONFIG_SCSI_SAS_LIBSAS is not set ++# CONFIG_SCSI_SRP_ATTRS is not set ++CONFIG_SCSI_LOWLEVEL=y ++# CONFIG_ISCSI_TCP is not set ++# CONFIG_SCSI_DEBUG is not set ++# CONFIG_ATA is not set ++# CONFIG_MD is not set ++CONFIG_NETDEVICES=y ++# CONFIG_NETDEVICES_MULTIQUEUE is not set ++# CONFIG_DUMMY is not set ++# CONFIG_BONDING is not set ++# CONFIG_MACVLAN is not set ++# CONFIG_EQUALIZER is not set ++CONFIG_TUN=m ++# CONFIG_VETH is not set ++# CONFIG_PHYLIB is not set ++CONFIG_NET_ETHERNET=y ++CONFIG_MII=y ++# CONFIG_AX88796 is not set ++# CONFIG_SMC91X is not set ++# CONFIG_DM9000 is not set ++# CONFIG_IBM_NEW_EMAC_ZMII is not set ++# CONFIG_IBM_NEW_EMAC_RGMII is not set ++# CONFIG_IBM_NEW_EMAC_TAH is not set ++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set ++CONFIG_NET_PCI=y ++# CONFIG_B44 is not set ++CONFIG_CS89x0=m ++# CONFIG_NETDEV_1000 is not set ++# CONFIG_NETDEV_10000 is not set ++ ++# ++# Wireless LAN ++# ++# CONFIG_WLAN_PRE80211 is not set ++# CONFIG_WLAN_80211 is not set ++ ++# ++# USB Network Adapters ++# ++CONFIG_USB_CATC=m ++CONFIG_USB_KAWETH=m ++CONFIG_USB_PEGASUS=m ++CONFIG_USB_RTL8150=m ++CONFIG_USB_USBNET=y ++CONFIG_USB_NET_AX8817X=m ++CONFIG_USB_NET_CDCETHER=m ++CONFIG_USB_NET_DM9601=m ++CONFIG_USB_NET_GL620A=m ++CONFIG_USB_NET_NET1080=m ++CONFIG_USB_NET_PLUSB=m ++CONFIG_USB_NET_MCS7830=m ++CONFIG_USB_NET_RNDIS_HOST=m ++CONFIG_USB_NET_CDC_SUBSET=m ++CONFIG_USB_ALI_M5632=y ++CONFIG_USB_AN2720=y ++CONFIG_USB_BELKIN=y ++CONFIG_USB_ARMLINUX=y ++CONFIG_USB_EPSON2888=y ++CONFIG_USB_KC2190=y ++CONFIG_USB_NET_ZAURUS=m ++# CONFIG_WAN is not set ++CONFIG_PPP=m ++CONFIG_PPP_MULTILINK=y ++CONFIG_PPP_FILTER=y ++CONFIG_PPP_ASYNC=m ++CONFIG_PPP_SYNC_TTY=m ++CONFIG_PPP_DEFLATE=m ++CONFIG_PPP_BSDCOMP=m ++CONFIG_PPP_MPPE=m ++# CONFIG_PPPOE is not set ++# CONFIG_PPPOL2TP is not set ++# CONFIG_SLIP is not set ++CONFIG_SLHC=m ++# CONFIG_SHAPER is not set ++# CONFIG_NETCONSOLE is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set ++# CONFIG_ISDN is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++# CONFIG_INPUT_POLLDEV is not set ++ ++# ++# Userland interfaces ++# ++CONFIG_INPUT_MOUSEDEV=y ++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set ++CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 ++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640 ++# CONFIG_INPUT_JOYDEV is not set ++CONFIG_INPUT_EVDEV=y ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++CONFIG_INPUT_KEYBOARD=y ++# CONFIG_KEYBOARD_ATKBD is not set ++# CONFIG_KEYBOARD_SUNKBD is not set ++# CONFIG_KEYBOARD_LKKBD is not set ++# CONFIG_KEYBOARD_XTKBD is not set ++# CONFIG_KEYBOARD_NEWTON is not set ++CONFIG_KEYBOARD_STOWAWAY=m ++CONFIG_KEYBOARD_GPIO=m ++CONFIG_KEYBOARD_M800=y ++CONFIG_KEYBOARD_QT2410=y ++CONFIG_INPUT_MOUSE=y ++# CONFIG_MOUSE_PS2 is not set ++# CONFIG_MOUSE_SERIAL is not set ++# CONFIG_MOUSE_APPLETOUCH is not set ++# CONFIG_MOUSE_VSXXXAA is not set ++# CONFIG_MOUSE_GPIO is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TABLET is not set ++CONFIG_INPUT_TOUCHSCREEN=y ++# CONFIG_TOUCHSCREEN_ADS7846 is not set ++# CONFIG_TOUCHSCREEN_FUJITSU is not set ++CONFIG_TOUCHSCREEN_S3C2410=y ++# CONFIG_TOUCHSCREEN_S3C2410_DEBUG is not set ++# CONFIG_TOUCHSCREEN_GUNZE is not set ++# CONFIG_TOUCHSCREEN_ELO is not set ++# CONFIG_TOUCHSCREEN_MTOUCH is not set ++# CONFIG_TOUCHSCREEN_MK712 is not set ++# CONFIG_TOUCHSCREEN_PENMOUNT is not set ++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set ++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set ++# CONFIG_TOUCHSCREEN_UCB1400 is not set ++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set ++CONFIG_INPUT_MISC=y ++# CONFIG_INPUT_ATI_REMOTE is not set ++# CONFIG_INPUT_ATI_REMOTE2 is not set ++# CONFIG_INPUT_KEYSPAN_REMOTE is not set ++# CONFIG_INPUT_POWERMATE is not set ++# CONFIG_INPUT_YEALINK is not set ++CONFIG_INPUT_UINPUT=m ++CONFIG_INPUT_LIS302DL=y ++ ++# ++# Hardware I/O ports ++# ++CONFIG_SERIO=y ++# CONFIG_SERIO_SERPORT is not set ++# CONFIG_SERIO_RAW is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_VT_CONSOLE=y ++CONFIG_NR_TTY_DEVICES=4 ++CONFIG_HW_CONSOLE=y ++CONFIG_VT_HW_CONSOLE_BINDING=y ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++# CONFIG_SERIAL_8250 is not set ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_S3C2410=y ++CONFIG_SERIAL_S3C2410_CONSOLE=y ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++CONFIG_UNIX98_PTYS=y ++# CONFIG_LEGACY_PTYS is not set ++# CONFIG_IPMI_HANDLER is not set ++# CONFIG_HW_RANDOM is not set ++# CONFIG_NVRAM is not set ++# CONFIG_R3964 is not set ++# CONFIG_RAW_DRIVER is not set ++# CONFIG_TCG_TPM is not set ++CONFIG_I2C=y ++CONFIG_I2C_BOARDINFO=y ++CONFIG_I2C_CHARDEV=y ++ ++# ++# I2C Algorithms ++# ++# CONFIG_I2C_ALGOBIT is not set ++# CONFIG_I2C_ALGOPCF is not set ++# CONFIG_I2C_ALGOPCA is not set ++ ++# ++# I2C Hardware Bus support ++# ++# CONFIG_I2C_GPIO is not set ++# CONFIG_I2C_OCORES is not set ++# CONFIG_I2C_PARPORT_LIGHT is not set ++CONFIG_I2C_S3C2410=y ++# CONFIG_I2C_SIMTEC is not set ++# CONFIG_I2C_TAOS_EVM is not set ++# CONFIG_I2C_STUB is not set ++# CONFIG_I2C_TINY_USB is not set ++ ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_SENSORS_DS1337 is not set ++# CONFIG_SENSORS_DS1374 is not set ++# CONFIG_DS1682 is not set ++# CONFIG_SENSORS_EEPROM is not set ++CONFIG_SENSORS_PCF50606=y ++CONFIG_SENSORS_PCF50633=y ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_SENSORS_MAX6875 is not set ++# CONFIG_SENSORS_TSL2550 is not set ++CONFIG_SENSORS_TSL256X=m ++# CONFIG_PCA9632 is not set ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set ++ ++# ++# SPI support ++# ++CONFIG_SPI=y ++# CONFIG_SPI_DEBUG is not set ++CONFIG_SPI_MASTER=y ++ ++# ++# SPI Master Controller Drivers ++# ++CONFIG_SPI_BITBANG=y ++CONFIG_SPI_S3C24XX=y ++CONFIG_SPI_S3C24XX_GPIO=y ++ ++# ++# SPI Protocol Masters ++# ++# CONFIG_SPI_AT25 is not set ++# CONFIG_SPI_SPIDEV is not set ++# CONFIG_SPI_TLE62X0 is not set ++# CONFIG_W1 is not set ++CONFIG_POWER_SUPPLY=y ++# CONFIG_POWER_SUPPLY_DEBUG is not set ++# CONFIG_PDA_POWER is not set ++CONFIG_APM_POWER=y ++# CONFIG_BATTERY_DS2760 is not set ++CONFIG_BATTERY_BQ27000_HDQ=y ++# CONFIG_HWMON is not set ++CONFIG_WATCHDOG=y ++# CONFIG_WATCHDOG_NOWAYOUT is not set ++ ++# ++# Watchdog Device Drivers ++# ++# CONFIG_SOFT_WATCHDOG is not set ++CONFIG_S3C2410_WATCHDOG=m ++ ++# ++# USB-based Watchdog Cards ++# ++# CONFIG_USBPCWATCHDOG is not set ++ ++# ++# Sonics Silicon Backplane ++# ++CONFIG_SSB_POSSIBLE=y ++# CONFIG_SSB is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_SM501 is not set ++# CONFIG_MFD_GLAMO is not set ++ ++# ++# Multimedia devices ++# ++# CONFIG_VIDEO_DEV is not set ++# CONFIG_DVB_CORE is not set ++# CONFIG_DAB is not set ++ ++# ++# Graphics support ++# ++# CONFIG_VGASTATE is not set ++# CONFIG_VIDEO_OUTPUT_CONTROL is not set ++CONFIG_FB=y ++# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_FB_DDC is not set ++CONFIG_FB_CFB_FILLRECT=y ++CONFIG_FB_CFB_COPYAREA=y ++CONFIG_FB_CFB_IMAGEBLIT=y ++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set ++# CONFIG_FB_SYS_FILLRECT is not set ++# CONFIG_FB_SYS_COPYAREA is not set ++# CONFIG_FB_SYS_IMAGEBLIT is not set ++# CONFIG_FB_SYS_FOPS is not set ++CONFIG_FB_DEFERRED_IO=y ++# CONFIG_FB_SVGALIB is not set ++# CONFIG_FB_MACMODES is not set ++# CONFIG_FB_BACKLIGHT is not set ++# CONFIG_FB_MODE_HELPERS is not set ++# CONFIG_FB_TILEBLITTING is not set ++ ++# ++# Frame buffer hardware drivers ++# ++# CONFIG_FB_UVESA is not set ++# CONFIG_FB_S1D13XXX is not set ++CONFIG_FB_S3C2410=y ++# CONFIG_FB_S3C2410_DEBUG is not set ++# CONFIG_FB_VIRTUAL is not set ++CONFIG_BACKLIGHT_LCD_SUPPORT=y ++CONFIG_LCD_CLASS_DEVICE=y ++# CONFIG_LCD_LTV350QV is not set ++CONFIG_BACKLIGHT_CLASS_DEVICE=y ++# CONFIG_BACKLIGHT_CORGI is not set ++ ++# ++# Display device support ++# ++# CONFIG_DISPLAY_SUPPORT is not set ++CONFIG_DISPLAY_JBT6K74=y ++ ++# ++# Console display driver support ++# ++# CONFIG_VGA_CONSOLE is not set ++CONFIG_DUMMY_CONSOLE=y ++CONFIG_FRAMEBUFFER_CONSOLE=y ++# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set ++# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set ++CONFIG_FONTS=y ++# CONFIG_FONT_8x8 is not set ++# CONFIG_FONT_8x16 is not set ++CONFIG_FONT_6x11=y ++# CONFIG_FONT_7x14 is not set ++# CONFIG_FONT_PEARL_8x8 is not set ++# CONFIG_FONT_ACORN_8x8 is not set ++# CONFIG_FONT_MINI_4x6 is not set ++# CONFIG_FONT_SUN8x16 is not set ++# CONFIG_FONT_SUN12x22 is not set ++# CONFIG_FONT_10x18 is not set ++# CONFIG_LOGO is not set ++ ++# ++# Sound ++# ++CONFIG_SOUND=y ++ ++# ++# Advanced Linux Sound Architecture ++# ++CONFIG_SND=m ++CONFIG_SND_TIMER=m ++CONFIG_SND_PCM=m ++CONFIG_SND_RAWMIDI=m ++# CONFIG_SND_SEQUENCER is not set ++CONFIG_SND_OSSEMUL=y ++CONFIG_SND_MIXER_OSS=m ++CONFIG_SND_PCM_OSS=m ++CONFIG_SND_PCM_OSS_PLUGINS=y ++# CONFIG_SND_DYNAMIC_MINORS is not set ++CONFIG_SND_SUPPORT_OLD_API=y ++CONFIG_SND_VERBOSE_PROCFS=y ++# CONFIG_SND_VERBOSE_PRINTK is not set ++# CONFIG_SND_DEBUG is not set ++ ++# ++# Generic devices ++# ++# CONFIG_SND_DUMMY is not set ++# CONFIG_SND_MTPAV is not set ++# CONFIG_SND_SERIAL_U16550 is not set ++# CONFIG_SND_MPU401 is not set ++ ++# ++# ALSA ARM devices ++# ++ ++# ++# SPI devices ++# ++ ++# ++# USB devices ++# ++# CONFIG_SND_USB_AUDIO is not set ++# CONFIG_SND_USB_CAIAQ is not set ++ ++# ++# System on Chip audio support ++# ++CONFIG_SND_SOC=m ++CONFIG_SND_S3C24XX_SOC=m ++ ++# ++# SoC Audio support for SuperH ++# ++ ++# ++# Open Sound System ++# ++# CONFIG_SOUND_PRIME is not set ++CONFIG_HID_SUPPORT=y ++CONFIG_HID=y ++# CONFIG_HID_DEBUG is not set ++# CONFIG_HIDRAW is not set ++ ++# ++# USB Input Devices ++# ++CONFIG_USB_HID=y ++# CONFIG_USB_HIDINPUT_POWERBOOK is not set ++# CONFIG_HID_FF is not set ++CONFIG_USB_HIDDEV=y ++CONFIG_USB_SUPPORT=y ++CONFIG_USB_ARCH_HAS_HCD=y ++CONFIG_USB_ARCH_HAS_OHCI=y ++# CONFIG_USB_ARCH_HAS_EHCI is not set ++CONFIG_USB=y ++# CONFIG_USB_DEBUG is not set ++ ++# ++# Miscellaneous USB options ++# ++CONFIG_USB_DEVICEFS=y ++CONFIG_USB_DEVICE_CLASS=y ++# CONFIG_USB_DYNAMIC_MINORS is not set ++CONFIG_USB_SUSPEND=y ++# CONFIG_USB_PERSIST is not set ++# CONFIG_USB_OTG is not set ++ ++# ++# USB Host Controller Drivers ++# ++# CONFIG_USB_ISP116X_HCD is not set ++CONFIG_USB_OHCI_HCD=m ++# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set ++# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set ++CONFIG_USB_OHCI_LITTLE_ENDIAN=y ++# CONFIG_USB_SL811_HCD is not set ++# CONFIG_USB_R8A66597_HCD is not set ++ ++# ++# USB Device Class drivers ++# ++CONFIG_USB_ACM=m ++CONFIG_USB_PRINTER=m ++ ++# ++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' ++# ++ ++# ++# may also be needed; see USB_STORAGE Help for more information ++# ++CONFIG_USB_STORAGE=m ++# CONFIG_USB_STORAGE_DEBUG is not set ++CONFIG_USB_STORAGE_DATAFAB=y ++CONFIG_USB_STORAGE_FREECOM=y ++# CONFIG_USB_STORAGE_ISD200 is not set ++CONFIG_USB_STORAGE_DPCM=y ++CONFIG_USB_STORAGE_USBAT=y ++CONFIG_USB_STORAGE_SDDR09=y ++CONFIG_USB_STORAGE_SDDR55=y ++CONFIG_USB_STORAGE_JUMPSHOT=y ++CONFIG_USB_STORAGE_ALAUDA=y ++CONFIG_USB_STORAGE_KARMA=y ++CONFIG_USB_LIBUSUAL=y ++ ++# ++# USB Imaging devices ++# ++# CONFIG_USB_MDC800 is not set ++# CONFIG_USB_MICROTEK is not set ++CONFIG_USB_MON=y ++ ++# ++# USB port drivers ++# ++ ++# ++# USB Serial Converter support ++# ++CONFIG_USB_SERIAL=m ++CONFIG_USB_SERIAL_GENERIC=y ++CONFIG_USB_SERIAL_AIRCABLE=m ++CONFIG_USB_SERIAL_AIRPRIME=m ++CONFIG_USB_SERIAL_ARK3116=m ++CONFIG_USB_SERIAL_BELKIN=m ++# CONFIG_USB_SERIAL_CH341 is not set ++CONFIG_USB_SERIAL_WHITEHEAT=m ++CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m ++CONFIG_USB_SERIAL_CP2101=m ++CONFIG_USB_SERIAL_CYPRESS_M8=m ++CONFIG_USB_SERIAL_EMPEG=m ++CONFIG_USB_SERIAL_FTDI_SIO=m ++CONFIG_USB_SERIAL_FUNSOFT=m ++CONFIG_USB_SERIAL_VISOR=m ++CONFIG_USB_SERIAL_IPAQ=m ++CONFIG_USB_SERIAL_IR=m ++CONFIG_USB_SERIAL_EDGEPORT=m ++CONFIG_USB_SERIAL_EDGEPORT_TI=m ++CONFIG_USB_SERIAL_GARMIN=m ++CONFIG_USB_SERIAL_IPW=m ++CONFIG_USB_SERIAL_KEYSPAN_PDA=m ++CONFIG_USB_SERIAL_KEYSPAN=m ++CONFIG_USB_SERIAL_KEYSPAN_MPR=y ++CONFIG_USB_SERIAL_KEYSPAN_USA28=y ++CONFIG_USB_SERIAL_KEYSPAN_USA28X=y ++CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y ++CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y ++CONFIG_USB_SERIAL_KEYSPAN_USA19=y ++CONFIG_USB_SERIAL_KEYSPAN_USA18X=y ++CONFIG_USB_SERIAL_KEYSPAN_USA19W=y ++CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y ++CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y ++CONFIG_USB_SERIAL_KEYSPAN_USA49W=y ++CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y ++CONFIG_USB_SERIAL_KLSI=m ++CONFIG_USB_SERIAL_KOBIL_SCT=m ++CONFIG_USB_SERIAL_MCT_U232=m ++CONFIG_USB_SERIAL_MOS7720=m ++CONFIG_USB_SERIAL_MOS7840=m ++CONFIG_USB_SERIAL_NAVMAN=m ++CONFIG_USB_SERIAL_PL2303=m ++# CONFIG_USB_SERIAL_OTI6858 is not set ++CONFIG_USB_SERIAL_HP4X=m ++CONFIG_USB_SERIAL_SAFE=m ++CONFIG_USB_SERIAL_SAFE_PADDED=y ++CONFIG_USB_SERIAL_SIERRAWIRELESS=m ++CONFIG_USB_SERIAL_TI=m ++CONFIG_USB_SERIAL_CYBERJACK=m ++CONFIG_USB_SERIAL_XIRCOM=m ++CONFIG_USB_SERIAL_OPTION=m ++CONFIG_USB_SERIAL_OMNINET=m ++# CONFIG_USB_SERIAL_DEBUG is not set ++CONFIG_USB_EZUSB=y ++ ++# ++# USB Miscellaneous drivers ++# ++# CONFIG_USB_EMI62 is not set ++# CONFIG_USB_EMI26 is not set ++# CONFIG_USB_ADUTUX is not set ++# CONFIG_USB_AUERSWALD is not set ++# CONFIG_USB_RIO500 is not set ++# CONFIG_USB_LEGOTOWER is not set ++# CONFIG_USB_LCD is not set ++# CONFIG_USB_BERRY_CHARGE is not set ++# CONFIG_USB_LED is not set ++# CONFIG_USB_CYPRESS_CY7C63 is not set ++# CONFIG_USB_CYTHERM is not set ++# CONFIG_USB_PHIDGET is not set ++# CONFIG_USB_IDMOUSE is not set ++# CONFIG_USB_FTDI_ELAN is not set ++# CONFIG_USB_APPLEDISPLAY is not set ++# CONFIG_USB_LD is not set ++# CONFIG_USB_TRANCEVIBRATOR is not set ++# CONFIG_USB_IOWARRIOR is not set ++# CONFIG_USB_TEST is not set ++ ++# ++# USB DSL modem support ++# ++ ++# ++# USB Gadget Support ++# ++CONFIG_USB_GADGET=y ++# CONFIG_USB_GADGET_DEBUG is not set ++# CONFIG_USB_GADGET_DEBUG_FILES is not set ++CONFIG_USB_GADGET_SELECTED=y ++# CONFIG_USB_GADGET_AMD5536UDC is not set ++# CONFIG_USB_GADGET_ATMEL_USBA is not set ++# CONFIG_USB_GADGET_FSL_USB2 is not set ++# CONFIG_USB_GADGET_NET2280 is not set ++# CONFIG_USB_GADGET_PXA2XX is not set ++# CONFIG_USB_GADGET_M66592 is not set ++# CONFIG_USB_GADGET_GOKU is not set ++# CONFIG_USB_GADGET_LH7A40X is not set ++# CONFIG_USB_GADGET_OMAP is not set ++CONFIG_USB_GADGET_S3C2410=y ++CONFIG_USB_S3C2410=y ++# CONFIG_USB_S3C2410_DEBUG is not set ++# CONFIG_USB_GADGET_AT91 is not set ++# CONFIG_USB_GADGET_DUMMY_HCD is not set ++# CONFIG_USB_GADGET_DUALSPEED is not set ++# CONFIG_USB_ZERO is not set ++CONFIG_USB_ETH=y ++CONFIG_USB_ETH_RNDIS=y ++# CONFIG_USB_GADGETFS is not set ++# CONFIG_USB_FILE_STORAGE is not set ++# CONFIG_USB_G_SERIAL is not set ++CONFIG_USB_MIDI_GADGET=m ++ ++# ++# SDIO support ++# ++# CONFIG_SDIO is not set ++CONFIG_MMC=y ++# CONFIG_MMC_DEBUG is not set ++CONFIG_MMC_UNSAFE_RESUME=y ++ ++# ++# MMC/SD Card Drivers ++# ++CONFIG_MMC_BLOCK=y ++CONFIG_MMC_BLOCK_BOUNCE=y ++CONFIG_SDIO_UART=m ++ ++# ++# MMC/SD Host Controller Drivers ++# ++# CONFIG_MMC_SPI is not set ++CONFIG_MMC_S3C=y ++CONFIG_NEW_LEDS=y ++CONFIG_LEDS_CLASS=y ++ ++# ++# LED drivers ++# ++CONFIG_LEDS_S3C24XX=m ++# CONFIG_LEDS_GPIO is not set ++ ++# ++# LED Triggers ++# ++CONFIG_LEDS_TRIGGERS=y ++CONFIG_LEDS_TRIGGER_TIMER=y ++# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set ++CONFIG_RTC_LIB=y ++CONFIG_RTC_CLASS=y ++CONFIG_RTC_HCTOSYS=y ++CONFIG_RTC_HCTOSYS_DEVICE="rtc0" ++CONFIG_RTC_DEBUG=y ++ ++# ++# RTC interfaces ++# ++CONFIG_RTC_INTF_SYSFS=y ++CONFIG_RTC_INTF_PROC=y ++CONFIG_RTC_INTF_DEV=y ++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set ++# CONFIG_RTC_DRV_TEST is not set ++ ++# ++# I2C RTC drivers ++# ++# CONFIG_RTC_DRV_DS1307 is not set ++# CONFIG_RTC_DRV_DS1374 is not set ++# CONFIG_RTC_DRV_DS1672 is not set ++# CONFIG_RTC_DRV_MAX6900 is not set ++# CONFIG_RTC_DRV_RS5C372 is not set ++# CONFIG_RTC_DRV_ISL1208 is not set ++# CONFIG_RTC_DRV_X1205 is not set ++# CONFIG_RTC_DRV_PCF8563 is not set ++# CONFIG_RTC_DRV_PCF8583 is not set ++# CONFIG_RTC_DRV_M41T80 is not set ++ ++# ++# SPI RTC drivers ++# ++# CONFIG_RTC_DRV_RS5C348 is not set ++# CONFIG_RTC_DRV_MAX6902 is not set ++ ++# ++# Platform RTC drivers ++# ++# CONFIG_RTC_DRV_CMOS is not set ++# CONFIG_RTC_DRV_DS1553 is not set ++# CONFIG_RTC_DRV_STK17TA8 is not set ++# CONFIG_RTC_DRV_DS1742 is not set ++# CONFIG_RTC_DRV_M48T86 is not set ++# CONFIG_RTC_DRV_M48T59 is not set ++# CONFIG_RTC_DRV_V3020 is not set ++ ++# ++# on-CPU RTC drivers ++# ++CONFIG_RTC_DRV_S3C=m ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++# CONFIG_EXT3_FS_XATTR is not set ++# CONFIG_EXT4DEV_FS is not set ++CONFIG_JBD=y ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++CONFIG_FS_POSIX_ACL=y ++# CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++# CONFIG_OCFS2_FS is not set ++# CONFIG_MINIX_FS is not set ++CONFIG_ROMFS_FS=y ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y ++# CONFIG_QUOTA is not set ++CONFIG_DNOTIFY=y ++# CONFIG_AUTOFS_FS is not set ++CONFIG_AUTOFS4_FS=m ++CONFIG_FUSE_FS=m ++ ++# ++# CD-ROM/DVD Filesystems ++# ++CONFIG_ISO9660_FS=m ++CONFIG_JOLIET=y ++# CONFIG_ZISOFS is not set ++CONFIG_UDF_FS=m ++CONFIG_UDF_NLS=y ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=y ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++# CONFIG_NTFS_FS is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_PROC_SYSCTL=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++# CONFIG_TMPFS_POSIX_ACL is not set ++# CONFIG_HUGETLB_PAGE is not set ++CONFIG_CONFIGFS_FS=m ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++CONFIG_JFFS2_FS=y ++CONFIG_JFFS2_FS_DEBUG=0 ++CONFIG_JFFS2_FS_WRITEBUFFER=y ++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set ++CONFIG_JFFS2_SUMMARY=y ++# CONFIG_JFFS2_FS_XATTR is not set ++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set ++CONFIG_JFFS2_ZLIB=y ++# CONFIG_JFFS2_LZO is not set ++CONFIG_JFFS2_RTIME=y ++# CONFIG_JFFS2_RUBIN is not set ++CONFIG_CRAMFS=y ++# CONFIG_VXFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++CONFIG_NETWORK_FILESYSTEMS=y ++CONFIG_NFS_FS=y ++CONFIG_NFS_V3=y ++# CONFIG_NFS_V3_ACL is not set ++CONFIG_NFS_V4=y ++# CONFIG_NFS_DIRECTIO is not set ++CONFIG_NFSD=m ++CONFIG_NFSD_V3=y ++# CONFIG_NFSD_V3_ACL is not set ++CONFIG_NFSD_V4=y ++CONFIG_NFSD_TCP=y ++CONFIG_ROOT_NFS=y ++CONFIG_LOCKD=y ++CONFIG_LOCKD_V4=y ++CONFIG_EXPORTFS=m ++CONFIG_NFS_COMMON=y ++CONFIG_SUNRPC=y ++CONFIG_SUNRPC_GSS=y ++# CONFIG_SUNRPC_BIND34 is not set ++CONFIG_RPCSEC_GSS_KRB5=y ++# CONFIG_RPCSEC_GSS_SPKM3 is not set ++# CONFIG_SMB_FS is not set ++CONFIG_CIFS=m ++# CONFIG_CIFS_STATS is not set ++CONFIG_CIFS_WEAK_PW_HASH=y ++# CONFIG_CIFS_XATTR is not set ++# CONFIG_CIFS_DEBUG2 is not set ++# CONFIG_CIFS_EXPERIMENTAL is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++ ++# ++# Partition Types ++# ++# CONFIG_PARTITION_ADVANCED is not set ++CONFIG_MSDOS_PARTITION=y ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=y ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++CONFIG_NLS_CODEPAGE_850=m ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++CONFIG_NLS_CODEPAGE_936=m ++CONFIG_NLS_CODEPAGE_950=m ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++# CONFIG_NLS_ASCII is not set ++CONFIG_NLS_ISO8859_1=y ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++CONFIG_NLS_UTF8=m ++# CONFIG_DLM is not set ++CONFIG_INSTRUMENTATION=y ++CONFIG_PROFILING=y ++CONFIG_OPROFILE=m ++# CONFIG_MARKERS is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_WARN_DEPRECATED=y ++CONFIG_ENABLE_MUST_CHECK=y ++CONFIG_MAGIC_SYSRQ=y ++# CONFIG_UNUSED_SYMBOLS is not set ++# CONFIG_DEBUG_FS is not set ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++# CONFIG_DEBUG_SHIRQ is not set ++CONFIG_DETECT_SOFTLOCKUP=y ++# CONFIG_SCHED_DEBUG is not set ++# CONFIG_SCHEDSTATS is not set ++CONFIG_TIMER_STATS=y ++# CONFIG_DEBUG_SLAB is not set ++CONFIG_DEBUG_PREEMPT=y ++# CONFIG_DEBUG_RT_MUTEXES is not set ++# CONFIG_RT_MUTEX_TESTER is not set ++# CONFIG_DEBUG_SPINLOCK is not set ++# CONFIG_DEBUG_MUTEXES is not set ++# CONFIG_DEBUG_LOCK_ALLOC is not set ++# CONFIG_PROVE_LOCKING is not set ++# CONFIG_LOCK_STAT is not set ++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++CONFIG_DEBUG_INFO=y ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_LIST is not set ++# CONFIG_DEBUG_SG is not set ++CONFIG_FRAME_POINTER=y ++CONFIG_FORCED_INLINING=y ++# CONFIG_BOOT_PRINTK_DELAY is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_FAULT_INJECTION is not set ++# CONFIG_SAMPLES is not set ++# CONFIG_DEBUG_USER is not set ++CONFIG_DEBUG_ERRORS=y ++# CONFIG_DEBUG_LL is not set ++CONFIG_DEBUG_S3C_UART=2 ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++# CONFIG_SECURITY_FILE_CAPABILITIES is not set ++CONFIG_CRYPTO=y ++CONFIG_CRYPTO_ALGAPI=y ++CONFIG_CRYPTO_BLKCIPHER=y ++CONFIG_CRYPTO_HASH=y ++CONFIG_CRYPTO_MANAGER=y ++CONFIG_CRYPTO_HMAC=y ++CONFIG_CRYPTO_XCBC=m ++CONFIG_CRYPTO_NULL=m ++CONFIG_CRYPTO_MD4=m ++CONFIG_CRYPTO_MD5=y ++CONFIG_CRYPTO_SHA1=m ++CONFIG_CRYPTO_SHA256=m ++CONFIG_CRYPTO_SHA512=m ++CONFIG_CRYPTO_WP512=m ++CONFIG_CRYPTO_TGR192=m ++CONFIG_CRYPTO_GF128MUL=m ++CONFIG_CRYPTO_ECB=m ++CONFIG_CRYPTO_CBC=y ++CONFIG_CRYPTO_PCBC=m ++CONFIG_CRYPTO_LRW=m ++# CONFIG_CRYPTO_XTS is not set ++# CONFIG_CRYPTO_CRYPTD is not set ++CONFIG_CRYPTO_DES=y ++CONFIG_CRYPTO_FCRYPT=m ++CONFIG_CRYPTO_BLOWFISH=m ++CONFIG_CRYPTO_TWOFISH=m ++CONFIG_CRYPTO_TWOFISH_COMMON=m ++CONFIG_CRYPTO_SERPENT=m ++CONFIG_CRYPTO_AES=m ++CONFIG_CRYPTO_CAST5=m ++CONFIG_CRYPTO_CAST6=m ++CONFIG_CRYPTO_TEA=m ++CONFIG_CRYPTO_ARC4=m ++CONFIG_CRYPTO_KHAZAD=m ++CONFIG_CRYPTO_ANUBIS=m ++# CONFIG_CRYPTO_SEED is not set ++CONFIG_CRYPTO_DEFLATE=m ++CONFIG_CRYPTO_MICHAEL_MIC=m ++CONFIG_CRYPTO_CRC32C=m ++CONFIG_CRYPTO_CAMELLIA=m ++CONFIG_CRYPTO_TEST=m ++# CONFIG_CRYPTO_AUTHENC is not set ++CONFIG_CRYPTO_HW=y ++ ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++CONFIG_CRC_CCITT=m ++CONFIG_CRC16=m ++# CONFIG_CRC_ITU_T is not set ++CONFIG_CRC32=y ++# CONFIG_CRC7 is not set ++CONFIG_LIBCRC32C=m ++CONFIG_ZLIB_INFLATE=y ++CONFIG_ZLIB_DEFLATE=y ++CONFIG_TEXTSEARCH=y ++CONFIG_TEXTSEARCH_KMP=m ++CONFIG_TEXTSEARCH_BM=m ++CONFIG_TEXTSEARCH_FSM=m ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y +diff --git a/arch/arm/mach-s3c2440/mach-glofiish.c b/arch/arm/mach-s3c2440/mach-glofiish.c +new file mode 100644 +index 0000000..ee97110 +--- /dev/null ++++ b/arch/arm/mach-s3c2440/mach-glofiish.c +@@ -0,0 +1,620 @@ ++/* ++ * linux/arch/arm/mach-s3c2440/mach-glofiish.c ++ * ++ * S3C2440 Machine Support for the E-TEN glofiish X800/M800 ++ * ++ * Copyright (C) 2008 by Harald Welte <laforge@gnumonks.org> ++ * All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/types.h> ++#include <linux/interrupt.h> ++#include <linux/list.h> ++#include <linux/delay.h> ++#include <linux/timer.h> ++#include <linux/init.h> ++#include <linux/workqueue.h> ++#include <linux/platform_device.h> ++#include <linux/serial_core.h> ++#include <linux/spi/spi.h> ++#include <linux/spi/spi_bitbang.h> ++#include <linux/mmc/host.h> ++ ++#include <linux/mtd/mtd.h> ++#include <linux/mtd/nand.h> ++#include <linux/mtd/nand_ecc.h> ++#include <linux/mtd/partitions.h> ++#include <linux/mtd/physmap.h> ++ ++#include <asm/mach/arch.h> ++#include <asm/mach/map.h> ++#include <asm/mach/irq.h> ++ ++#include <asm/hardware.h> ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/mach-types.h> ++ ++#include <asm/arch-s3c2410/regs-irq.h> ++#include <asm/arch/regs-gpio.h> ++#include <asm/arch/regs-gpioj.h> ++#include <asm/arch/fb.h> ++#include <asm/arch/mci.h> ++#include <asm/arch/ts.h> ++#include <asm/arch/spi.h> ++#include <asm/arch/spi-gpio.h> ++#include <asm/arch/usb-control.h> ++ ++#include <asm/arch/glofiish.h> ++#include <asm/arch/gta01.h> ++ ++#include <asm/plat-s3c/regs-serial.h> ++#include <asm/plat-s3c/nand.h> ++#include <asm/plat-s3c24xx/devs.h> ++#include <asm/plat-s3c24xx/cpu.h> ++#include <asm/plat-s3c24xx/pm.h> ++#include <asm/plat-s3c24xx/udc.h> ++ ++#include <linux/jbt6k74.h> ++ ++/* ++ * this gets called every 1ms when we paniced. ++ */ ++ ++static long glofiish_panic_blink(long count) ++{ ++ long delay = 0; ++ static long last_blink; ++ static char led; ++ ++ if (count - last_blink < 100) /* 200ms period, fast blink */ ++ return 0; ++ ++ /* FIXME */ ++#if 0 ++ led ^= 1; ++ s3c2410_gpio_cfgpin(GTA02_GPIO_AUX_LED, S3C2410_GPIO_OUTPUT); ++ neo1973_gpb_setpin(GTA02_GPIO_AUX_LED, led); ++ ++ last_blink = count; ++#endif ++ return delay; ++} ++ ++struct platform_device gta02_version_device = { ++ .name = "neo1973-version", ++ .num_resources = 0, ++}; ++ ++struct platform_device gta02_resume_reason_device = { ++ .name = "neo1973-resume", ++ .num_resources = 0, ++}; ++ ++struct platform_device gta02_memconfig_device = { ++ .name = "neo1973-memconfig", ++ .num_resources = 0, ++}; ++ ++static struct map_desc m800_iodesc[] __initdata = { ++ { ++ .virtual = 0xe0000000, ++ .pfn = __phys_to_pfn(S3C2410_CS3+0x01000000), ++ .length = SZ_1M, ++ .type = MT_DEVICE ++ }, ++}; ++ ++#define UCON S3C2410_UCON_DEFAULT ++#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB ++#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE ++ ++static struct s3c2410_uartcfg m800_uartcfgs[] = { ++ [0] = { ++ .hwport = 0, ++ .flags = 0, ++ .ucon = UCON, ++ .ulcon = ULCON, ++ .ufcon = UFCON, ++ }, ++ [1] = { ++ .hwport = 1, ++ .flags = 0, ++ .ucon = UCON, ++ .ulcon = ULCON, ++ .ufcon = UFCON, ++ }, ++ [2] = { ++ .hwport = 2, ++ .flags = 0, ++ .ucon = UCON, ++ .ulcon = ULCON, ++ .ufcon = UFCON, ++ }, ++ ++}; ++ ++/* Configuration for 480x640 toppoly TD028TTEC1. ++ * Do not mark this as __initdata or it will break! */ ++static struct s3c2410fb_display glofiish_displays[] = { ++ { ++ .type = S3C2410_LCDCON1_TFT, ++ .width = 43, ++ .height = 58, ++ .xres = 480, ++ .yres = 640, ++ .bpp = 16, ++ ++ .pixclock = 40000, /* HCLK/4 */ ++ .left_margin = 2, ++ .right_margin = 2, ++ .hsync_len = 2, ++ .upper_margin = 2, ++ .lower_margin = 66, ++ .vsync_len = 2, ++ .lcdcon5 = S3C2410_LCDCON5_FRM565 | ++ S3C2410_LCDCON5_INVVCLK | ++ S3C2410_LCDCON5_INVVLINE | ++ S3C2410_LCDCON5_INVVFRAME | ++ S3C2410_LCDCON5_PWREN | ++ S3C2410_LCDCON5_HWSWP, ++ }, ++ { ++ .type = S3C2410_LCDCON1_TFT, ++ .width = 43, ++ .height = 58, ++ .xres = 480, ++ .yres = 640, ++ .bpp = 32, ++ ++ .pixclock = 40000, /* HCLK/4 */ ++ .left_margin = 104, ++ .right_margin = 8, ++ .hsync_len = 8, ++ .upper_margin = 2, ++ .lower_margin = 16, ++ .vsync_len = 2, ++ .lcdcon5 = S3C2410_LCDCON5_FRM565 | ++ S3C2410_LCDCON5_INVVCLK | ++ S3C2410_LCDCON5_INVVLINE | ++ S3C2410_LCDCON5_INVVFRAME | ++ S3C2410_LCDCON5_PWREN | ++ S3C2410_LCDCON5_HWSWP, ++ }, ++ { ++ .type = S3C2410_LCDCON1_TFT, ++ .width = 43, ++ .height = 58, ++ .xres = 240, ++ .yres = 320, ++ .bpp = 16, ++ ++ .pixclock = 40000, /* HCLK/4 */ ++ .left_margin = 104, ++ .right_margin = 8, ++ .hsync_len = 8, ++ .upper_margin = 2, ++ .lower_margin = 16, ++ .vsync_len = 2, ++ .lcdcon5 = S3C2410_LCDCON5_FRM565 | ++ S3C2410_LCDCON5_INVVCLK | ++ S3C2410_LCDCON5_INVVLINE | ++ S3C2410_LCDCON5_INVVFRAME | ++ S3C2410_LCDCON5_PWREN | ++ S3C2410_LCDCON5_HWSWP, ++ }, ++}; ++ ++static struct s3c2410fb_mach_info glofiish_lcd_cfg __initdata = { ++ .displays = glofiish_displays, ++ .num_displays = ARRAY_SIZE(glofiish_displays), ++ .default_display = 0, ++ ++ .lpcsel = ((0xCE6) & ~7) | 1<<4, ++}; ++ ++ ++static struct resource m800_sdio_resources[] = { ++ [0] = { ++ .flags = IORESOURCE_IRQ, ++ .start = IRQ_SDI, ++ .end = IRQ_SDI, ++ }, ++ [1] = { ++ .flags = IORESOURCE_MEM, ++ .start = S3C2410_PA_SDI, ++ .end = S3C2410_PA_SDI + S3C24XX_SZ_SDI - 1, ++ }, ++ [2] = { ++ .flags = IORESOURCE_DMA, ++ .start = 0, /* Channel 0 for SDI */ ++ .end = 0, ++ }, ++}; ++ ++static struct platform_device *glofiish_devices[] __initdata = { ++ &s3c_device_usb, ++ &s3c_device_lcd, ++ &s3c_device_wdt, ++ &s3c_device_i2c, ++ &s3c_device_iis, ++ &s3c_device_sdi, ++ &s3c_device_usbgadget, ++ &s3c_device_nand, ++ &s3c_device_ts, ++}; ++ ++static struct s3c2410_nand_set glofiish_nand_sets[] = { ++ [0] = { ++ .name = "glofiish-nand", ++ .nr_chips = 1, ++ .flags = S3C2410_NAND_BBT, ++ }, ++}; ++ ++/* choose a set of timings derived from S3C@2442B MCP54 ++ * data sheet (K5D2G13ACM-D075 MCP Memory) ++ */ ++ ++static struct s3c2410_platform_nand glofiish_nand_info = { ++ .tacls = 0, ++ .twrph0 = 25, ++ .twrph1 = 15, ++ .nr_sets = ARRAY_SIZE(glofiish_nand_sets), ++ .sets = glofiish_nand_sets, ++ .software_ecc = 1, ++}; ++ ++static struct s3c24xx_mci_pdata glofiish_mmc_cfg = { ++ .gpio_detect = M800_GPIO_nSD_DETECT, ++ .set_power = NULL, ++ .ocr_avail = MMC_VDD_32_33, ++}; ++ ++static void glofiish_udc_command(enum s3c2410_udc_cmd_e cmd) ++{ ++ printk(KERN_DEBUG "%s(%d)\n", __func__, cmd); ++ ++ switch (cmd) { ++ case S3C2410_UDC_P_ENABLE: ++ s3c2410_gpio_setpin(M800_GPIO_USB_PULLUP, 1); ++ break; ++ case S3C2410_UDC_P_DISABLE: ++ s3c2410_gpio_setpin(M800_GPIO_USB_PULLUP, 0); ++ break; ++ case S3C2410_UDC_P_RESET: ++ /* FIXME! */ ++ break; ++ default: ++ break; ++ } ++} ++ ++/* get PMU to set USB current limit accordingly */ ++ ++static void glofiish_udc_vbus_draw(unsigned int ma) ++{ ++ //pcf50633_notify_usb_current_limit_change(pcf50633_global, ma); ++} ++ ++static struct s3c2410_udc_mach_info glofiish_udc_cfg = { ++ .vbus_draw = glofiish_udc_vbus_draw, ++ .udc_command = glofiish_udc_command, ++ ++}; ++ ++static struct s3c2410_ts_mach_info glofiish_ts_cfg = { ++ .delay = 10000, ++ .presc = 50000000 / 1000000, /* 50 MHz PCLK / 1MHz */ ++ /* simple averaging, 2^n samples */ ++ .oversampling_shift = 5, ++ /* averaging filter length, 2^n */ ++ .excursion_filter_len_bits = 5, ++ /* flagged for beauty contest on next sample if differs from ++ * average more than this ++ */ ++ .reject_threshold_vs_avg = 2, ++}; ++ ++ ++/* SPI: LCM control interface attached to Glamo3362 */ ++ ++static void m800_jbt6k74_reset(int devidx, int level) ++{ ++ //glamo_lcm_reset(level); ++ printk(KERN_DEBUG "gta01_jbt6k74_reset\n"); ++} ++ ++/* finally bring up deferred backlight resume now LCM is resumed itself */ ++ ++static void m800_jbt6k74_resuming(int devidx) ++{ ++ //pcf50633_backlight_resume(pcf50633_global); ++ //gta01bl_deferred_resume(); ++} ++ ++const struct jbt6k74_platform_data jbt6k74_pdata = { ++ .reset = m800_jbt6k74_reset, ++ .resuming = m800_jbt6k74_resuming, ++}; ++ ++static struct spi_board_info glofiish_spi_board_info[] = { ++ { ++ .modalias = "jbt6k74", ++ /* platform_data */ ++ .platform_data = &jbt6k74_pdata, ++ /* controller_data */ ++ /* irq */ ++ .max_speed_hz = 10 * 1000 * 1000, ++ .bus_num = 2, ++ /* chip_select */ ++ }, ++}; ++ ++static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int csidx, int cs) ++{ ++ switch (cs) { ++ case BITBANG_CS_ACTIVE: ++ s3c2410_gpio_setpin(S3C2410_GPG3, 0); ++ break; ++ case BITBANG_CS_INACTIVE: ++ s3c2410_gpio_setpin(S3C2410_GPG3, 1); ++ break; ++ } ++} ++ ++static struct s3c2410_spigpio_info spi_gpio_cfg = { ++ .pin_clk = S3C2410_GPG7, ++ .pin_mosi = S3C2410_GPG6, ++ .pin_miso = S3C2410_GPG5, ++ .board_size = ARRAY_SIZE(glofiish_spi_board_info), ++ .board_info = glofiish_spi_board_info, ++ .chip_select = &spi_gpio_cs, ++ .num_chipselect = 2, /*** Should be 1 or 2 for gta01? ***/ ++}; ++ ++static struct resource s3c_spi_lcm_resource[] = { ++ [0] = { ++ .start = S3C2410_GPG3, ++ .end = S3C2410_GPG3, ++ }, ++ [1] = { ++ .start = S3C2410_GPG5, ++ .end = S3C2410_GPG5, ++ }, ++ [2] = { ++ .start = S3C2410_GPG6, ++ .end = S3C2410_GPG6, ++ }, ++ [3] = { ++ .start = S3C2410_GPG7, ++ .end = S3C2410_GPG7, ++ }, ++}; ++ ++struct platform_device s3c_device_spi_lcm = { ++ .name = "spi_s3c24xx_gpio", ++ .id = 1, ++ .num_resources = ARRAY_SIZE(s3c_spi_lcm_resource), ++ .resource = s3c_spi_lcm_resource, ++ .dev = { ++ .platform_data = &spi_gpio_cfg, ++ }, ++}; ++ ++static struct gta01bl_machinfo backlight_machinfo = { ++ .default_intensity = 1, ++ .max_intensity = 1, ++ .limit_mask = 1, ++ .defer_resume_backlight = 1, ++}; ++ ++static struct resource gta01_bl_resources[] = { ++ [0] = { ++ .start = M800_GPIO_BACKLIGHT, ++ .end = M800_GPIO_BACKLIGHT, ++ }, ++}; ++ ++struct platform_device gta01_bl_dev = { ++ .name = "gta01-bl", ++ .num_resources = ARRAY_SIZE(gta01_bl_resources), ++ .resource = gta01_bl_resources, ++ .dev = { ++ .platform_data = &backlight_machinfo, ++ }, ++}; ++ ++ ++#if 0 /* currently this is not used and we use gpio spi */ ++static struct glamo_spi_info glamo_spi_cfg = { ++ .board_size = ARRAY_SIZE(gta02_spi_board_info), ++ .board_info = gta02_spi_board_info, ++}; ++#endif /* 0 */ ++ ++#if 0 ++static struct resource gta02_vibrator_resources[] = { ++ [0] = { ++ .start = GTA02_GPIO_VIBRATOR_ON, ++ .end = GTA02_GPIO_VIBRATOR_ON, ++ }, ++}; ++ ++static struct platform_device gta02_vibrator_dev = { ++ .name = "neo1973-vibrator", ++ .num_resources = ARRAY_SIZE(gta02_vibrator_resources), ++ .resource = gta02_vibrator_resources, ++}; ++ ++static struct resource gta02_led_resources[] = { ++ { ++ .name = "gta02-power:orange", ++ .start = GTA02_GPIO_PWR_LED1, ++ .end = GTA02_GPIO_PWR_LED1, ++ }, { ++ .name = "gta02-power:blue", ++ .start = GTA02_GPIO_PWR_LED2, ++ .end = GTA02_GPIO_PWR_LED2, ++ }, { ++ .name = "gta02-aux:red", ++ .start = GTA02_GPIO_AUX_LED, ++ .end = GTA02_GPIO_AUX_LED, ++ }, ++}; ++ ++struct platform_device gta02_led_dev = { ++ .name = "gta02-led", ++ .num_resources = ARRAY_SIZE(gta02_led_resources), ++ .resource = gta02_led_resources, ++}; ++ ++static struct resource gta02_button_resources[] = { ++ [0] = { ++ .start = GTA02_GPIO_AUX_KEY, ++ .end = GTA02_GPIO_AUX_KEY, ++ }, ++ [1] = { ++ .start = GTA02_GPIO_HOLD_KEY, ++ .end = GTA02_GPIO_HOLD_KEY, ++ }, ++ [2] = { ++ .start = GTA02_GPIO_JACK_INSERT, ++ .end = GTA02_GPIO_JACK_INSERT, ++ }, ++}; ++ ++static struct platform_device gta02_button_dev = { ++ .name = "neo1973-button", ++ .num_resources = ARRAY_SIZE(gta02_button_resources), ++ .resource = gta02_button_resources, ++}; ++#endif ++ ++/* USB */ ++static struct s3c2410_hcd_info glofiish_usb_info = { ++ .port[0] = { ++ .flags = S3C_HCDFLG_USED, ++ }, ++ .port[1] = { ++ .flags = 0, ++ }, ++}; ++ ++static struct resource m800_button_resources[] = { ++ [0] = { ++ .start = M800_GPIO_nKEY_POWER, ++ .end = M800_GPIO_nKEY_POWER, ++ }, ++ [1] = { ++ .start = M800_GPIO_nKEY_CAMERA, ++ .end = M800_GPIO_nKEY_CAMERA, ++ }, ++ [3] = { ++ .start = M800_GPIO_nKEY_RECORD, ++ .end = M800_GPIO_nKEY_RECORD, ++ }, ++ [2] = { ++ .start = M800_GPIO_SLIDE, ++ .end = M800_GPIO_SLIDE, ++ }, ++}; ++ ++static struct platform_device m800_button_dev = { ++ .name = "m800-button", ++ .num_resources = ARRAY_SIZE(m800_button_resources), ++ .resource = m800_button_resources, ++}; ++ ++static struct platform_device m800_pm_bt_dev = { ++ .name = "neo1973-pm-bt", ++}; ++ ++static void __init glofiish_map_io(void) ++{ ++ s3c24xx_init_io(m800_iodesc, ARRAY_SIZE(m800_iodesc)); ++ s3c24xx_init_clocks(16934400); ++ s3c24xx_init_uarts(m800_uartcfgs, ARRAY_SIZE(m800_uartcfgs)); ++} ++ ++static irqreturn_t gta02_modem_irq(int irq, void *param) ++{ ++ printk(KERN_DEBUG "modem wakeup interrupt\n"); ++ return IRQ_HANDLED; ++} ++ ++static irqreturn_t ar6000_wow_irq(int irq, void *param) ++{ ++ printk(KERN_DEBUG "ar6000_wow interrupt\n"); ++ return IRQ_HANDLED; ++} ++ ++/* ++ * hardware_ecc=1|0 ++ */ ++static char hardware_ecc_str[4] __initdata = ""; ++ ++static int __init hardware_ecc_setup(char *str) ++{ ++ if (str) ++ strlcpy(hardware_ecc_str, str, sizeof(hardware_ecc_str)); ++ return 1; ++} ++ ++__setup("hardware_ecc=", hardware_ecc_setup); ++ ++static void __init glofiish_machine_init(void) ++{ ++ int rc; ++ ++ /* set the panic callback to make AUX blink fast */ ++ panic_blink = glofiish_panic_blink; ++ ++ /* do not force soft ecc if we are asked to use hardware_ecc */ ++ if (hardware_ecc_str[0] == '1') ++ glofiish_nand_info.software_ecc = 0; ++ ++ s3c_device_usb.dev.platform_data = &glofiish_usb_info; ++ s3c_device_nand.dev.platform_data = &glofiish_nand_info; ++ s3c_device_sdi.dev.platform_data = &glofiish_mmc_cfg; ++ ++ s3c24xx_fb_set_platdata(&glofiish_lcd_cfg); ++ s3c24xx_udc_set_platdata(&glofiish_udc_cfg); ++ set_s3c2410ts_info(&glofiish_ts_cfg); ++ ++ platform_device_register(>a01_bl_dev); ++ platform_device_register(&m800_pm_bt_dev); ++ platform_device_register(&m800_button_dev); ++ platform_device_register(&s3c_device_spi_lcm); ++ ++ platform_add_devices(glofiish_devices, ARRAY_SIZE(glofiish_devices)); ++ ++ s3c2410_pm_init(); ++} ++ ++MACHINE_START(M800, "Glofiish M800") ++ .phys_io = S3C2410_PA_UART, ++ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, ++ .boot_params = S3C2410_SDRAM_PA + 0x100, ++ .map_io = glofiish_map_io, ++ .init_irq = s3c24xx_init_irq, ++ .init_machine = glofiish_machine_init, ++ .timer = &s3c24xx_timer, ++MACHINE_END +diff --git a/drivers/input/keyboard/m800kbd.c b/drivers/input/keyboard/m800kbd.c +new file mode 100644 +index 0000000..22f1aab +--- /dev/null ++++ b/drivers/input/keyboard/m800kbd.c +@@ -0,0 +1,330 @@ ++/* ++ * Keyboard driver for E-TEN M800 GSM phone ++ * ++ * (C) 2008 by Harald Welte <laforge@gnumonks.org> ++ * All rights reserved. ++ * ++ * inspired by corkgbd.c by Richard Purdie ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/delay.h> ++#include <linux/platform_device.h> ++#include <linux/init.h> ++#include <linux/input.h> ++#include <linux/interrupt.h> ++#include <linux/jiffies.h> ++#include <linux/module.h> ++#include <linux/slab.h> ++#include <linux/workqueue.h> ++ ++#include <asm/gpio.h> ++#include <asm/mach-types.h> ++ ++struct m800kbd { ++ struct input_dev *input; ++ unsigned int suspended; ++ struct work_struct work; ++ int work_in_progress; ++ int hp_irq_count_in_work; ++ int hp_irq_count; ++ int jack_irq; ++}; ++ ++static irqreturn_t m800kbd_power_irq(int irq, void *dev_id) ++{ ++ struct m800kbd *m800kbd_data = dev_id; ++ int key_pressed = !gpio_get_value(irq_to_gpio(irq)); ++ ++ input_report_key(m800kbd_data->input, KEY_POWER, key_pressed); ++ input_sync(m800kbd_data->input); ++ ++ return IRQ_HANDLED; ++} ++ ++static irqreturn_t m800kbd_cam_irq(int irq, void *dev_id) ++{ ++ struct m800kbd *m800kbd_data = dev_id; ++ ++ int key_pressed = !gpio_get_value(irq_to_gpio(irq)); ++ input_report_key(m800kbd_data->input, KEY_CAMERA, key_pressed); ++ input_sync(m800kbd_data->input); ++ ++ return IRQ_HANDLED; ++} ++ ++static irqreturn_t m800kbd_rec_irq(int irq, void *dev_id) ++{ ++ struct m800kbd *m800kbd_data = dev_id; ++ ++ int key_pressed = !gpio_get_value(irq_to_gpio(irq)); ++ input_report_key(m800kbd_data->input, KEY_RECORD, key_pressed); ++ input_sync(m800kbd_data->input); ++ ++ return IRQ_HANDLED; ++} ++ ++static irqreturn_t m800kbd_slide_irq(int irq, void *dev_id) ++{ ++ struct m800kbd *m800kbd_data = dev_id; ++ ++ int key_pressed = gpio_get_value(irq_to_gpio(irq)); ++ input_report_key(m800kbd_data->input, SW_LID, key_pressed); ++ input_sync(m800kbd_data->input); ++ ++ return IRQ_HANDLED; ++} ++ ++#if 0 ++static void m800kbd_debounce_jack(struct work_struct *work) ++{ ++ struct m800kbd *kbd = container_of(work, struct m800kbd, work); ++ unsigned long flags; ++ int loop = 0; ++ ++ do { ++ /* ++ * we wait out any multiple interrupt ++ * stuttering in 100ms lumps ++ */ ++ do { ++ kbd->hp_irq_count_in_work = kbd->hp_irq_count; ++ msleep(100); ++ } while (kbd->hp_irq_count != kbd->hp_irq_count_in_work); ++ /* ++ * no new interrupts on jack for 100ms... ++ * ok we will report it ++ */ ++ input_report_switch(kbd->input, SW_HEADPHONE_INSERT, ++ gpio_get_value(irq_to_gpio(kbd->jack_irq))); ++ input_sync(kbd->input); ++ /* ++ * we go around the outer loop again if we detect that more ++ * interrupts came while we are servicing here. But we have ++ * to sequence it carefully with interrupts off ++ */ ++ local_save_flags(flags); ++ /* no interrupts during this work means we can exit the work */ ++ loop = !!(kbd->hp_irq_count != kbd->hp_irq_count_in_work); ++ if (!loop) ++ kbd->work_in_progress = 0; ++ local_irq_restore(flags); ++ /* ++ * interrupt that comes here will either queue a new work action ++ * since work_in_progress is cleared now, or be dealt with ++ * when we loop. ++ */ ++ } while (loop); ++} ++ ++ ++static irqreturn_t m800kbd_headphone_irq(int irq, void *dev_id) ++{ ++ struct m800kbd *m800kbd_data = dev_id; ++ ++ /* ++ * this interrupt is prone to bouncing and userspace doesn't like ++ * to have to deal with that kind of thing. So we do not accept ++ * that a jack interrupt is equal to a jack event. Instead we fire ++ * some work on the first interrupt, and it hangs about in 100ms units ++ * until no more interrupts come. Then it accepts the state it finds ++ * for jack insert and reports it once ++ */ ++ ++ m800kbd_data->hp_irq_count++; ++ /* ++ * the first interrupt we see for a while, we fire the work item ++ * and record the interrupt count when we did that. If more interrupts ++ * come in the meanwhile, we can tell by the difference in that ++ * stored count and hp_irq_count which increments every interrupt ++ */ ++ if (!m800kbd_data->work_in_progress) { ++ m800kbd_data->jack_irq = irq; ++ m800kbd_data->hp_irq_count_in_work = ++ m800kbd_data->hp_irq_count; ++ if (!schedule_work(&m800kbd_data->work)) ++ printk(KERN_ERR ++ "Unable to schedule headphone debounce\n"); ++ else ++ m800kbd_data->work_in_progress = 1; ++ } ++ ++ return IRQ_HANDLED; ++} ++#endif ++ ++#ifdef CONFIG_PM ++static int m800kbd_suspend(struct platform_device *dev, pm_message_t state) ++{ ++ struct m800kbd *m800kbd = platform_get_drvdata(dev); ++ ++ m800kbd->suspended = 1; ++ ++ return 0; ++} ++ ++static int m800kbd_resume(struct platform_device *dev) ++{ ++ struct m800kbd *m800kbd = platform_get_drvdata(dev); ++ ++ m800kbd->suspended = 0; ++ ++ return 0; ++} ++#else ++#define m800kbd_suspend NULL ++#define m800kbd_resume NULL ++#endif ++ ++static int m800kbd_probe(struct platform_device *pdev) ++{ ++ struct m800kbd *m800kbd; ++ struct input_dev *input_dev; ++ int rc, irq_power, irq_cam, irq_rec, irq_slide; ++ ++ m800kbd = kzalloc(sizeof(struct m800kbd), GFP_KERNEL); ++ input_dev = input_allocate_device(); ++ if (!m800kbd || !input_dev) { ++ kfree(m800kbd); ++ input_free_device(input_dev); ++ return -ENOMEM; ++ } ++ ++ if (pdev->resource[0].flags != 0) ++ return -EINVAL; ++ ++ irq_power = gpio_to_irq(pdev->resource[0].start); ++ if (irq_power < 0) ++ return -EINVAL; ++ ++ irq_cam = gpio_to_irq(pdev->resource[1].start); ++ if (irq_cam < 0) ++ return -EINVAL; ++ ++ irq_rec = gpio_to_irq(pdev->resource[2].start); ++ if (irq_rec < 0) ++ return -EINVAL; ++ ++ irq_slide = gpio_to_irq(pdev->resource[3].start); ++ if (irq_slide < 0) ++ return -EINVAL; ++ ++ platform_set_drvdata(pdev, m800kbd); ++ ++ m800kbd->input = input_dev; ++ ++ //INIT_WORK(&m800kbd->work, m800kbd_debounce_jack); ++ ++ input_dev->name = "M800 Buttons"; ++ input_dev->phys = "m800kbd/input0"; ++ input_dev->id.bustype = BUS_HOST; ++ input_dev->id.vendor = 0x0001; ++ input_dev->id.product = 0x0001; ++ input_dev->id.version = 0x0100; ++ input_dev->cdev.dev = &pdev->dev; ++ input_dev->private = m800kbd; ++ ++ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_SW); ++ set_bit(SW_HEADPHONE_INSERT, input_dev->swbit); ++ set_bit(SW_LID, input_dev->swbit); ++ set_bit(KEY_POWER, input_dev->keybit); ++ set_bit(KEY_CAMERA, input_dev->keybit); ++ set_bit(KEY_RECORD, input_dev->keybit); ++ ++ rc = input_register_device(m800kbd->input); ++ if (rc) ++ goto out_register; ++ ++ if (request_irq(irq_power, m800kbd_power_irq, IRQF_DISABLED | ++ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, ++ "M800 Power button", m800kbd)) { ++ dev_err(&pdev->dev, "Can't get IRQ %u\n", irq_power); ++ goto out_aux; ++ } ++ ++ enable_irq_wake(irq_power); ++ ++ if (request_irq(irq_cam, m800kbd_cam_irq, IRQF_DISABLED | ++ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, ++ "M800 Camera button", m800kbd)) { ++ dev_err(&pdev->dev, "Can't get IRQ %u\n", irq_cam); ++ goto out_hold; ++ } ++ ++ if (request_irq(irq_rec, m800kbd_rec_irq, IRQF_DISABLED | ++ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, ++ "M800 Record button", m800kbd)) { ++ dev_err(&pdev->dev, "Can't get IRQ %u\n", irq_rec); ++ goto out_hold; ++ } ++ ++ if (request_irq(irq_slide, m800kbd_slide_irq, IRQF_DISABLED | ++ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, ++ "M800 Slide", m800kbd)) { ++ dev_err(&pdev->dev, "Can't get IRQ %u\n", irq_slide); ++ goto out_jack; ++ } ++ enable_irq_wake(irq_slide); ++ ++ return 0; ++ ++out_jack: ++ free_irq(irq_cam, m800kbd); ++out_hold: ++ free_irq(irq_power, m800kbd); ++out_aux: ++ input_unregister_device(m800kbd->input); ++out_register: ++ input_free_device(m800kbd->input); ++ platform_set_drvdata(pdev, NULL); ++ kfree(m800kbd); ++ ++ return -ENODEV; ++} ++ ++static int m800kbd_remove(struct platform_device *pdev) ++{ ++ struct m800kbd *m800kbd = platform_get_drvdata(pdev); ++ ++ free_irq(gpio_to_irq(pdev->resource[2].start), m800kbd); ++ free_irq(gpio_to_irq(pdev->resource[1].start), m800kbd); ++ free_irq(gpio_to_irq(pdev->resource[0].start), m800kbd); ++ ++ input_unregister_device(m800kbd->input); ++ input_free_device(m800kbd->input); ++ platform_set_drvdata(pdev, NULL); ++ kfree(m800kbd); ++ ++ return 0; ++} ++ ++static struct platform_driver m800kbd_driver = { ++ .probe = m800kbd_probe, ++ .remove = m800kbd_remove, ++ .suspend = m800kbd_suspend, ++ .resume = m800kbd_resume, ++ .driver = { ++ .name = "m800-button", ++ }, ++}; ++ ++static int __devinit m800kbd_init(void) ++{ ++ return platform_driver_register(&m800kbd_driver); ++} ++ ++static void __exit m800kbd_exit(void) ++{ ++ platform_driver_unregister(&m800kbd_driver); ++} ++ ++module_init(m800kbd_init); ++module_exit(m800kbd_exit); ++ ++MODULE_AUTHOR("Harald Welte <laforge@gnumonks.org>"); ++MODULE_DESCRIPTION("E-TEN glofiish M800 GPIO buttons input driver"); ++MODULE_LICENSE("GPL"); +diff --git a/include/asm-arm/arch-s3c2410/glofiish.h b/include/asm-arm/arch-s3c2410/glofiish.h +new file mode 100644 +index 0000000..1d0586f +--- /dev/null ++++ b/include/asm-arm/arch-s3c2410/glofiish.h +@@ -0,0 +1,39 @@ ++#ifndef _GLOFIISH_H ++#define _GLOFIISH_H ++ ++#include <asm/arch/regs-gpio.h> ++ ++#define M800_GPIO_USB_PULLUP S3C2410_GPA21 ++ ++#define M800_GPIO_BACKLIGHT S3C2410_GPB0 ++#define M800_GPIO_KBDLIGHT S3C2410_GPB1 ++#define M800_GPIO_GPS_POWER S3C2410_GPB6 ++ ++#define M800_GPIO_BT_POWER_1 S3C2410_GPC8 ++#define M800_GPIO_BT_POWER_2 S3C2410_GPC9 ++ ++#define M800_GPIO_nKEY_POWER S3C2410_GPF0 ++#define M800_GPIO_CPLD S3C2410_GPF2 ++#define M800_GPIO_USB_ATTACH S3C2410_GPF3 ++#define M800_GPIO_WIFI_1 S3C2410_GPF5 ++#define M800_GPIO_WIFI_2 S3C2410_GPF7 ++ ++#define M800_GPIO_FMRADIO S3C2410_GPG0 ++#define M800_GPIO_nKEY_CAMERA S3C2410_GPG2 ++#define M800_GPIO_nKEY_RECORD S3C2410_GPG4 ++#define M800_GPIO_SLIDE S3C2410_GPG6 ++#define M800_GPIO_nSD_DETECT S3C2410_GPG7 ++ ++#define M800_IRQ_nKEY_POWER IRQ_EINT0 ++#define M800_IRQ_CPLD_KEY IRQ_EINT2 ++#define M800_IRQ_USB_ATTACH IRQ_EINT3 ++#define M800_IRQ_WIFI_1 IRQ_EINT5 ++#define M800_IRQ_WIFI_2 IRQ_EINT7 ++#define M800_IRQ_FMRADIO IRQ_EINT8 ++#define M800_IRQ_nKEY_CAMERA IRQ_EINT10 ++#define M800_IRQ_nKEY_RECORD IRQ_EINT12 ++#define M800_IRQ_CAPSENSE IRQ_EINT13 ++#define M800_IRQ_KBD_SLIDE IRQ_EINT14 ++#define M800_IRQ_nSD_DETECT IRQ_EINT15 ++ ++#endif +-- +1.5.6.5 + |