aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/s3c24xx/files-2.6.31/drivers/ar6000/htc/ar6k.c
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/s3c24xx/files-2.6.31/drivers/ar6000/htc/ar6k.c')
-rw-r--r--target/linux/s3c24xx/files-2.6.31/drivers/ar6000/htc/ar6k.c991
1 files changed, 991 insertions, 0 deletions
diff --git a/target/linux/s3c24xx/files-2.6.31/drivers/ar6000/htc/ar6k.c b/target/linux/s3c24xx/files-2.6.31/drivers/ar6000/htc/ar6k.c
new file mode 100644
index 0000000000..72472abb0d
--- /dev/null
+++ b/target/linux/s3c24xx/files-2.6.31/drivers/ar6000/htc/ar6k.c
@@ -0,0 +1,991 @@
+/*
+ * AR6K device layer that handles register level I/O
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "AR6Khwreg.h"
+#include "a_osapi.h"
+#include "a_debug.h"
+#include "hif.h"
+#include "htc_packet.h"
+#include "ar6k.h"
+
+#define MAILBOX_FOR_BLOCK_SIZE 1
+
+extern A_UINT32 resetok;
+
+static A_STATUS DevEnableInterrupts(AR6K_DEVICE *pDev);
+static A_STATUS DevDisableInterrupts(AR6K_DEVICE *pDev);
+
+#define LOCK_AR6K(p) A_MUTEX_LOCK(&(p)->Lock);
+#define UNLOCK_AR6K(p) A_MUTEX_UNLOCK(&(p)->Lock);
+
+void AR6KFreeIOPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket)
+{
+ LOCK_AR6K(pDev);
+ HTC_PACKET_ENQUEUE(&pDev->RegisterIOList,pPacket);
+ UNLOCK_AR6K(pDev);
+}
+
+HTC_PACKET *AR6KAllocIOPacket(AR6K_DEVICE *pDev)
+{
+ HTC_PACKET *pPacket;
+
+ LOCK_AR6K(pDev);
+ pPacket = HTC_PACKET_DEQUEUE(&pDev->RegisterIOList);
+ UNLOCK_AR6K(pDev);
+
+ return pPacket;
+}
+
+A_STATUS DevSetup(AR6K_DEVICE *pDev)
+{
+ A_UINT32 mailboxaddrs[AR6K_MAILBOXES];
+ A_UINT32 blocksizes[AR6K_MAILBOXES];
+ A_STATUS status = A_OK;
+ int i;
+
+ AR_DEBUG_ASSERT(AR6K_IRQ_PROC_REGS_SIZE == 16);
+ AR_DEBUG_ASSERT(AR6K_IRQ_ENABLE_REGS_SIZE == 4);
+
+ do {
+ /* give a handle to HIF for this target */
+ HIFSetHandle(pDev->HIFDevice, (void *)pDev);
+ /* initialize our free list of IO packets */
+ INIT_HTC_PACKET_QUEUE(&pDev->RegisterIOList);
+ A_MUTEX_INIT(&pDev->Lock);
+
+ /* get the addresses for all 4 mailboxes */
+ status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_ADDR,
+ mailboxaddrs, sizeof(mailboxaddrs));
+
+ if (status != A_OK) {
+ AR_DEBUG_ASSERT(FALSE);
+ break;
+ }
+
+ /* carve up register I/O packets (these are for ASYNC register I/O ) */
+ for (i = 0; i < AR6K_MAX_REG_IO_BUFFERS; i++) {
+ HTC_PACKET *pIOPacket;
+ pIOPacket = &pDev->RegIOBuffers[i].HtcPacket;
+ SET_HTC_PACKET_INFO_RX_REFILL(pIOPacket,
+ pDev,
+ pDev->RegIOBuffers[i].Buffer,
+ AR6K_REG_IO_BUFFER_SIZE,
+ 0); /* don't care */
+ AR6KFreeIOPacket(pDev,pIOPacket);
+ }
+
+ /* get the address of the mailbox we are using */
+ pDev->MailboxAddress = mailboxaddrs[HTC_MAILBOX];
+
+ /* get the block sizes */
+ status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE,
+ blocksizes, sizeof(blocksizes));
+
+ if (status != A_OK) {
+ AR_DEBUG_ASSERT(FALSE);
+ break;
+ }
+
+ /* note: we actually get the block size of a mailbox other than 0, for SDIO the block
+ * size on mailbox 0 is artificially set to 1. So we use the block size that is set
+ * for the other 3 mailboxes */
+ pDev->BlockSize = blocksizes[MAILBOX_FOR_BLOCK_SIZE];
+ /* must be a power of 2 */
+ AR_DEBUG_ASSERT((pDev->BlockSize & (pDev->BlockSize - 1)) == 0);
+
+ /* assemble mask, used for padding to a block */
+ pDev->BlockMask = pDev->BlockSize - 1;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("BlockSize: %d, MailboxAddress:0x%X \n",
+ pDev->BlockSize, pDev->MailboxAddress));
+
+ pDev->GetPendingEventsFunc = NULL;
+ /* see if the HIF layer implements the get pending events function */
+ HIFConfigureDevice(pDev->HIFDevice,
+ HIF_DEVICE_GET_PENDING_EVENTS_FUNC,
+ &pDev->GetPendingEventsFunc,
+ sizeof(pDev->GetPendingEventsFunc));
+
+ /* assume we can process HIF interrupt events asynchronously */
+ pDev->HifIRQProcessingMode = HIF_DEVICE_IRQ_ASYNC_SYNC;
+
+ /* see if the HIF layer overrides this assumption */
+ HIFConfigureDevice(pDev->HIFDevice,
+ HIF_DEVICE_GET_IRQ_PROC_MODE,
+ &pDev->HifIRQProcessingMode,
+ sizeof(pDev->HifIRQProcessingMode));
+
+ switch (pDev->HifIRQProcessingMode) {
+ case HIF_DEVICE_IRQ_SYNC_ONLY:
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF Interrupt processing is SYNC ONLY\n"));
+ break;
+ case HIF_DEVICE_IRQ_ASYNC_SYNC:
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF Interrupt processing is ASYNC and SYNC\n"));
+ break;
+ default:
+ AR_DEBUG_ASSERT(FALSE);
+ }
+
+ pDev->HifMaskUmaskRecvEvent = NULL;
+
+ /* see if the HIF layer implements the mask/unmask recv events function */
+ HIFConfigureDevice(pDev->HIFDevice,
+ HIF_DEVICE_GET_RECV_EVENT_MASK_UNMASK_FUNC,
+ &pDev->HifMaskUmaskRecvEvent,
+ sizeof(pDev->HifMaskUmaskRecvEvent));
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF special overrides : 0x%X , 0x%X\n",
+ (A_UINT32)pDev->GetPendingEventsFunc, (A_UINT32)pDev->HifMaskUmaskRecvEvent));
+
+ status = DevDisableInterrupts(pDev);
+
+ } while (FALSE);
+
+ if (A_FAILED(status)) {
+ /* make sure handle is cleared */
+ HIFSetHandle(pDev->HIFDevice, NULL);
+ }
+
+ return status;
+
+}
+
+static A_STATUS DevEnableInterrupts(AR6K_DEVICE *pDev)
+{
+ A_STATUS status;
+ AR6K_IRQ_ENABLE_REGISTERS regs;
+
+ LOCK_AR6K(pDev);
+
+ /* Enable all the interrupts except for the dragon interrupt */
+ pDev->IrqEnableRegisters.int_status_enable = INT_STATUS_ENABLE_ERROR_SET(0x01) |
+ INT_STATUS_ENABLE_CPU_SET(0x01) |
+ INT_STATUS_ENABLE_COUNTER_SET(0x01);
+
+ if (NULL == pDev->GetPendingEventsFunc) {
+ pDev->IrqEnableRegisters.int_status_enable |= INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
+ } else {
+ /* The HIF layer provided us with a pending events function which means that
+ * the detection of pending mbox messages is handled in the HIF layer.
+ * This is the case for the SPI2 interface.
+ * In the normal case we enable MBOX interrupts, for the case
+ * with HIFs that offer this mechanism, we keep these interrupts
+ * masked */
+ pDev->IrqEnableRegisters.int_status_enable &= ~INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
+ }
+
+
+ /* Set up the CPU Interrupt Status Register */
+ pDev->IrqEnableRegisters.cpu_int_status_enable = CPU_INT_STATUS_ENABLE_BIT_SET(0x00);
+
+ /* Set up the Error Interrupt Status Register */
+ pDev->IrqEnableRegisters.error_status_enable =
+ ERROR_STATUS_ENABLE_RX_UNDERFLOW_SET(0x01) |
+ ERROR_STATUS_ENABLE_TX_OVERFLOW_SET(0x01);
+
+ /* Set up the Counter Interrupt Status Register (only for debug interrupt to catch fatal errors) */
+ pDev->IrqEnableRegisters.counter_int_status_enable =
+ COUNTER_INT_STATUS_ENABLE_BIT_SET(AR6K_TARGET_DEBUG_INTR_MASK);
+
+ /* copy into our temp area */
+ A_MEMCPY(&regs,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE);
+
+ UNLOCK_AR6K(pDev);
+
+ /* always synchronous */
+ status = HIFReadWrite(pDev->HIFDevice,
+ INT_STATUS_ENABLE_ADDRESS,
+ &regs.int_status_enable,
+ AR6K_IRQ_ENABLE_REGS_SIZE,
+ HIF_WR_SYNC_BYTE_INC,
+ NULL);
+
+ if (status != A_OK) {
+ /* Can't write it for some reason */
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+ ("Failed to update interrupt control registers err: %d\n", status));
+
+ }
+
+ return status;
+}
+
+static A_STATUS DevDisableInterrupts(AR6K_DEVICE *pDev)
+{
+ AR6K_IRQ_ENABLE_REGISTERS regs;
+
+ LOCK_AR6K(pDev);
+ /* Disable all interrupts */
+ pDev->IrqEnableRegisters.int_status_enable = 0;
+ pDev->IrqEnableRegisters.cpu_int_status_enable = 0;
+ pDev->IrqEnableRegisters.error_status_enable = 0;
+ pDev->IrqEnableRegisters.counter_int_status_enable = 0;
+ /* copy into our temp area */
+ A_MEMCPY(&regs,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE);
+
+ UNLOCK_AR6K(pDev);
+
+ /* always synchronous */
+ return HIFReadWrite(pDev->HIFDevice,
+ INT_STATUS_ENABLE_ADDRESS,
+ &regs.int_status_enable,
+ AR6K_IRQ_ENABLE_REGS_SIZE,
+ HIF_WR_SYNC_BYTE_INC,
+ NULL);
+}
+
+/* enable device interrupts */
+A_STATUS DevUnmaskInterrupts(AR6K_DEVICE *pDev)
+{
+ /* Unmask the host controller interrupts */
+ HIFUnMaskInterrupt(pDev->HIFDevice);
+
+ return DevEnableInterrupts(pDev);
+}
+
+/* disable all device interrupts */
+A_STATUS DevMaskInterrupts(AR6K_DEVICE *pDev)
+{
+ A_STATUS status;
+
+ status = DevDisableInterrupts(pDev);
+
+ if (A_SUCCESS(status)) {
+ /* Disable the interrupt at the HIF layer */
+ HIFMaskInterrupt(pDev->HIFDevice);
+ }
+
+ return status;
+}
+
+/* callback when our fetch to enable/disable completes */
+static void DevDoEnableDisableRecvAsyncHandler(void *Context, HTC_PACKET *pPacket)
+{
+ AR6K_DEVICE *pDev = (AR6K_DEVICE *)Context;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevDoEnableDisableRecvAsyncHandler: (dev: 0x%X)\n", (A_UINT32)pDev));
+
+ if (A_FAILED(pPacket->Status)) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+ (" Failed to disable receiver, status:%d \n", pPacket->Status));
+ }
+ /* free this IO packet */
+ AR6KFreeIOPacket(pDev,pPacket);
+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevDoEnableDisableRecvAsyncHandler \n"));
+}
+
+/* disable packet reception (used in case the host runs out of buffers)
+ * this is the "override" method when the HIF reports another methods to
+ * disable recv events */
+static A_STATUS DevDoEnableDisableRecvOverride(AR6K_DEVICE *pDev, A_BOOL EnableRecv, A_BOOL AsyncMode)
+{
+ A_STATUS status = A_OK;
+ HTC_PACKET *pIOPacket = NULL;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("DevDoEnableDisableRecvOverride: Enable:%d Mode:%d\n",
+ EnableRecv,AsyncMode));
+
+ do {
+
+ if (AsyncMode) {
+
+ pIOPacket = AR6KAllocIOPacket(pDev);
+
+ if (NULL == pIOPacket) {
+ status = A_NO_MEMORY;
+ AR_DEBUG_ASSERT(FALSE);
+ break;
+ }
+
+ /* stick in our completion routine when the I/O operation completes */
+ pIOPacket->Completion = DevDoEnableDisableRecvAsyncHandler;
+ pIOPacket->pContext = pDev;
+
+ /* call the HIF layer override and do this asynchronously */
+ status = pDev->HifMaskUmaskRecvEvent(pDev->HIFDevice,
+ EnableRecv ? HIF_UNMASK_RECV : HIF_MASK_RECV,
+ pIOPacket);
+ break;
+ }
+
+ /* if we get here we are doing it synchronously */
+ status = pDev->HifMaskUmaskRecvEvent(pDev->HIFDevice,
+ EnableRecv ? HIF_UNMASK_RECV : HIF_MASK_RECV,
+ NULL);
+
+ } while (FALSE);
+
+ if (A_FAILED(status) && (pIOPacket != NULL)) {
+ AR6KFreeIOPacket(pDev,pIOPacket);
+ }
+
+ return status;
+}
+
+/* disable packet reception (used in case the host runs out of buffers)
+ * this is the "normal" method using the interrupt enable registers through
+ * the host I/F */
+static A_STATUS DevDoEnableDisableRecvNormal(AR6K_DEVICE *pDev, A_BOOL EnableRecv, A_BOOL AsyncMode)
+{
+ A_STATUS status = A_OK;
+ HTC_PACKET *pIOPacket = NULL;
+ AR6K_IRQ_ENABLE_REGISTERS regs;
+
+ /* take the lock to protect interrupt enable shadows */
+ LOCK_AR6K(pDev);
+
+ if (EnableRecv) {
+ pDev->IrqEnableRegisters.int_status_enable |= INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
+ } else {
+ pDev->IrqEnableRegisters.int_status_enable &= ~INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
+ }
+
+ /* copy into our temp area */
+ A_MEMCPY(&regs,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE);
+ UNLOCK_AR6K(pDev);
+
+ do {
+
+ if (AsyncMode) {
+
+ pIOPacket = AR6KAllocIOPacket(pDev);
+
+ if (NULL == pIOPacket) {
+ status = A_NO_MEMORY;
+ AR_DEBUG_ASSERT(FALSE);
+ break;
+ }
+
+ /* copy values to write to our async I/O buffer */
+ A_MEMCPY(pIOPacket->pBuffer,&regs,AR6K_IRQ_ENABLE_REGS_SIZE);
+
+ /* stick in our completion routine when the I/O operation completes */
+ pIOPacket->Completion = DevDoEnableDisableRecvAsyncHandler;
+ pIOPacket->pContext = pDev;
+
+ /* write it out asynchronously */
+ HIFReadWrite(pDev->HIFDevice,
+ INT_STATUS_ENABLE_ADDRESS,
+ pIOPacket->pBuffer,
+ AR6K_IRQ_ENABLE_REGS_SIZE,
+ HIF_WR_ASYNC_BYTE_INC,
+ pIOPacket);
+ break;
+ }
+
+ /* if we get here we are doing it synchronously */
+
+ status = HIFReadWrite(pDev->HIFDevice,
+ INT_STATUS_ENABLE_ADDRESS,
+ &regs.int_status_enable,
+ AR6K_IRQ_ENABLE_REGS_SIZE,
+ HIF_WR_SYNC_BYTE_INC,
+ NULL);
+
+ } while (FALSE);
+
+ if (A_FAILED(status) && (pIOPacket != NULL)) {
+ AR6KFreeIOPacket(pDev,pIOPacket);
+ }
+
+ return status;
+}
+
+
+A_STATUS DevStopRecv(AR6K_DEVICE *pDev, A_BOOL AsyncMode)
+{
+ if (NULL == pDev->HifMaskUmaskRecvEvent) {
+ return DevDoEnableDisableRecvNormal(pDev,FALSE,AsyncMode);
+ } else {
+ return DevDoEnableDisableRecvOverride(pDev,FALSE,AsyncMode);
+ }
+}
+
+A_STATUS DevEnableRecv(AR6K_DEVICE *pDev, A_BOOL AsyncMode)
+{
+ if (NULL == pDev->HifMaskUmaskRecvEvent) {
+ return DevDoEnableDisableRecvNormal(pDev,TRUE,AsyncMode);
+ } else {
+ return DevDoEnableDisableRecvOverride(pDev,TRUE,AsyncMode);
+ }
+}
+
+void DevDumpRegisters(AR6K_IRQ_PROC_REGISTERS *pIrqProcRegs,
+ AR6K_IRQ_ENABLE_REGISTERS *pIrqEnableRegs)
+{
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, ("\n<------- Register Table -------->\n"));
+
+ if (pIrqProcRegs != NULL) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+ ("Int Status: 0x%x\n",pIrqProcRegs->host_int_status));
+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+ ("CPU Int Status: 0x%x\n",pIrqProcRegs->cpu_int_status));
+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+ ("Error Int Status: 0x%x\n",pIrqProcRegs->error_int_status));
+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+ ("Counter Int Status: 0x%x\n",pIrqProcRegs->counter_int_status));
+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+ ("Mbox Frame: 0x%x\n",pIrqProcRegs->mbox_frame));
+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+ ("Rx Lookahead Valid: 0x%x\n",pIrqProcRegs->rx_lookahead_valid));
+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+ ("Rx Lookahead 0: 0x%x\n",pIrqProcRegs->rx_lookahead[0]));
+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+ ("Rx Lookahead 1: 0x%x\n",pIrqProcRegs->rx_lookahead[1]));
+ }
+
+ if (pIrqEnableRegs != NULL) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+ ("Int Status Enable: 0x%x\n",pIrqEnableRegs->int_status_enable));
+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+ ("Counter Int Status Enable: 0x%x\n",pIrqEnableRegs->counter_int_status_enable));
+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, ("<------------------------------->\n"));
+ }
+}
+
+
+#ifdef MBOXHW_UNIT_TEST
+
+
+/* This is a mailbox hardware unit test that must be called in a schedulable context
+ * This test is very simple, it will send a list of buffers with a counting pattern
+ * and the target will invert the data and send the message back
+ *
+ * the unit test has the following constraints:
+ *
+ * The target has at least 8 buffers of 256 bytes each. The host will send
+ * the following pattern of buffers in rapid succession :
+ *
+ * 1 buffer - 128 bytes
+ * 1 buffer - 256 bytes
+ * 1 buffer - 512 bytes
+ * 1 buffer - 1024 bytes
+ *
+ * The host will send the buffers to one mailbox and wait for buffers to be reflected
+ * back from the same mailbox. The target sends the buffers FIFO order.
+ * Once the final buffer has been received for a mailbox, the next mailbox is tested.
+ *
+ *
+ * Note: To simplifythe test , we assume that the chosen buffer sizes
+ * will fall on a nice block pad
+ *
+ * It is expected that higher-order tests will be written to stress the mailboxes using
+ * a message-based protocol (with some performance timming) that can create more
+ * randomness in the packets sent over mailboxes.
+ *
+ * */
+
+#define A_ROUND_UP_PWR2(x, align) (((int) (x) + ((align)-1)) & ~((align)-1))
+
+#define BUFFER_BLOCK_PAD 128
+
+#if 0
+#define BUFFER1 128
+#define BUFFER2 256
+#define BUFFER3 512
+#define BUFFER4 1024
+#endif
+
+#if 1
+#define BUFFER1 80
+#define BUFFER2 200
+#define BUFFER3 444
+#define BUFFER4 800
+#endif
+
+#define TOTAL_BYTES (A_ROUND_UP_PWR2(BUFFER1,BUFFER_BLOCK_PAD) + \
+ A_ROUND_UP_PWR2(BUFFER2,BUFFER_BLOCK_PAD) + \
+ A_ROUND_UP_PWR2(BUFFER3,BUFFER_BLOCK_PAD) + \
+ A_ROUND_UP_PWR2(BUFFER4,BUFFER_BLOCK_PAD) )
+
+#define TEST_BYTES (BUFFER1 + BUFFER2 + BUFFER3 + BUFFER4)
+
+#define TEST_CREDITS_RECV_TIMEOUT 100
+
+static A_UINT8 g_Buffer[TOTAL_BYTES];
+static A_UINT32 g_MailboxAddrs[AR6K_MAILBOXES];
+static A_UINT32 g_BlockSizes[AR6K_MAILBOXES];
+
+#define BUFFER_PROC_LIST_DEPTH 4
+
+typedef struct _BUFFER_PROC_LIST{
+ A_UINT8 *pBuffer;
+ A_UINT32 length;
+}BUFFER_PROC_LIST;
+
+
+#define PUSH_BUFF_PROC_ENTRY(pList,len,pCurrpos) \
+{ \
+ (pList)->pBuffer = (pCurrpos); \
+ (pList)->length = (len); \
+ (pCurrpos) += (len); \
+ (pList)++; \
+}
+
+/* a simple and crude way to send different "message" sizes */
+static void AssembleBufferList(BUFFER_PROC_LIST *pList)
+{
+ A_UINT8 *pBuffer = g_Buffer;
+
+#if BUFFER_PROC_LIST_DEPTH < 4
+#error "Buffer processing list depth is not deep enough!!"
+#endif
+
+ PUSH_BUFF_PROC_ENTRY(pList,BUFFER1,pBuffer);
+ PUSH_BUFF_PROC_ENTRY(pList,BUFFER2,pBuffer);
+ PUSH_BUFF_PROC_ENTRY(pList,BUFFER3,pBuffer);
+ PUSH_BUFF_PROC_ENTRY(pList,BUFFER4,pBuffer);
+
+}
+
+#define FILL_ZERO TRUE
+#define FILL_COUNTING FALSE
+static void InitBuffers(A_BOOL Zero)
+{
+ A_UINT16 *pBuffer16 = (A_UINT16 *)g_Buffer;
+ int i;
+
+ /* fill buffer with 16 bit counting pattern or zeros */
+ for (i = 0; i < (TOTAL_BYTES / 2) ; i++) {
+ if (!Zero) {
+ pBuffer16[i] = (A_UINT16)i;
+ } else {
+ pBuffer16[i] = 0;
+ }
+ }
+}
+
+
+static A_BOOL CheckOneBuffer(A_UINT16 *pBuffer16, int Length)
+{
+ int i;
+ A_UINT16 startCount;
+ A_BOOL success = TRUE;
+
+ /* get the starting count */
+ startCount = pBuffer16[0];
+ /* invert it, this is the expected value */
+ startCount = ~startCount;
+ /* scan the buffer and verify */
+ for (i = 0; i < (Length / 2) ; i++,startCount++) {
+ /* target will invert all the data */
+ if ((A_UINT16)pBuffer16[i] != (A_UINT16)~startCount) {
+ success = FALSE;
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Invalid Data Got:0x%X, Expecting:0x%X (offset:%d, total:%d) \n",
+ pBuffer16[i], ((A_UINT16)~startCount), i, Length));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("0x%X 0x%X 0x%X 0x%X \n",
+ pBuffer16[i], pBuffer16[i + 1], pBuffer16[i + 2],pBuffer16[i+3]));
+ break;
+ }
+ }
+
+ return success;
+}
+
+static A_BOOL CheckBuffers(void)
+{
+ int i;
+ A_BOOL success = TRUE;
+ BUFFER_PROC_LIST checkList[BUFFER_PROC_LIST_DEPTH];
+
+ /* assemble the list */
+ AssembleBufferList(checkList);
+
+ /* scan the buffers and verify */
+ for (i = 0; i < BUFFER_PROC_LIST_DEPTH ; i++) {
+ success = CheckOneBuffer((A_UINT16 *)checkList[i].pBuffer, checkList[i].length);
+ if (!success) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Buffer : 0x%X, Length:%d failed verify \n",
+ (A_UINT32)checkList[i].pBuffer, checkList[i].length));
+ break;
+ }
+ }
+
+ return success;
+}
+
+ /* find the end marker for the last buffer we will be sending */
+static A_UINT16 GetEndMarker(void)
+{
+ A_UINT8 *pBuffer;
+ BUFFER_PROC_LIST checkList[BUFFER_PROC_LIST_DEPTH];
+
+ /* fill up buffers with the normal counting pattern */
+ InitBuffers(FILL_COUNTING);
+
+ /* assemble the list we will be sending down */
+ AssembleBufferList(checkList);
+ /* point to the last 2 bytes of the last buffer */
+ pBuffer = &(checkList[BUFFER_PROC_LIST_DEPTH - 1].pBuffer[(checkList[BUFFER_PROC_LIST_DEPTH - 1].length) - 2]);
+
+ /* the last count in the last buffer is the marker */
+ return (A_UINT16)pBuffer[0] | ((A_UINT16)pBuffer[1] << 8);
+}
+
+#define ATH_PRINT_OUT_ZONE ATH_DEBUG_ERR
+
+/* send the ordered buffers to the target */
+static A_STATUS SendBuffers(AR6K_DEVICE *pDev, int mbox)
+{
+ A_STATUS status = A_OK;
+ A_UINT32 request = HIF_WR_SYNC_BLOCK_INC;
+ BUFFER_PROC_LIST sendList[BUFFER_PROC_LIST_DEPTH];
+ int i;
+ int totalBytes = 0;
+ int paddedLength;
+ int totalwPadding = 0;
+
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Sending buffers on mailbox : %d \n",mbox));
+
+ /* fill buffer with counting pattern */
+ InitBuffers(FILL_COUNTING);
+
+ /* assemble the order in which we send */
+ AssembleBufferList(sendList);
+
+ for (i = 0; i < BUFFER_PROC_LIST_DEPTH; i++) {
+
+ /* we are doing block transfers, so we need to pad everything to a block size */
+ paddedLength = (sendList[i].length + (g_BlockSizes[mbox] - 1)) &
+ (~(g_BlockSizes[mbox] - 1));
+
+ /* send each buffer synchronously */
+ status = HIFReadWrite(pDev->HIFDevice,
+ g_MailboxAddrs[mbox],
+ sendList[i].pBuffer,
+ paddedLength,
+ request,
+ NULL);
+ if (status != A_OK) {
+ break;
+ }
+ totalBytes += sendList[i].length;
+ totalwPadding += paddedLength;
+ }
+
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Sent %d bytes (%d padded bytes) to mailbox : %d \n",totalBytes,totalwPadding,mbox));
+
+ return status;
+}
+
+/* poll the mailbox credit counter until we get a credit or timeout */
+static A_STATUS GetCredits(AR6K_DEVICE *pDev, int mbox, int *pCredits)
+{
+ A_STATUS status = A_OK;
+ int timeout = TEST_CREDITS_RECV_TIMEOUT;
+ A_UINT8 credits = 0;
+ A_UINT32 address;
+
+ while (TRUE) {
+
+ /* Read the counter register to get credits, this auto-decrements */
+ address = COUNT_DEC_ADDRESS + (AR6K_MAILBOXES + mbox) * 4;
+ status = HIFReadWrite(pDev->HIFDevice, address, &credits, sizeof(credits),
+ HIF_RD_SYNC_BYTE_FIX, NULL);
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+ ("Unable to decrement the command credit count register (mbox=%d)\n",mbox));
+ status = A_ERROR;
+ break;
+ }
+
+ if (credits) {
+ break;
+ }
+
+ timeout--;
+
+ if (timeout <= 0) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+ (" Timeout reading credit registers (mbox=%d, address:0x%X) \n",mbox,address));
+ status = A_ERROR;
+ break;
+ }
+
+ /* delay a little, target may not be ready */
+ msleep(1000);
+
+ }
+
+ if (status == A_OK) {
+ *pCredits = credits;
+ }
+
+ return status;
+}
+
+
+/* wait for the buffers to come back */
+static A_STATUS RecvBuffers(AR6K_DEVICE *pDev, int mbox)
+{
+ A_STATUS status = A_OK;
+ A_UINT32 request = HIF_RD_SYNC_BLOCK_INC;
+ BUFFER_PROC_LIST recvList[BUFFER_PROC_LIST_DEPTH];
+ int curBuffer;
+ int credits;
+ int i;
+ int totalBytes = 0;
+ int paddedLength;
+ int totalwPadding = 0;
+
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Waiting for buffers on mailbox : %d \n",mbox));
+
+ /* zero the buffers */
+ InitBuffers(FILL_ZERO);
+
+ /* assemble the order in which we should receive */
+ AssembleBufferList(recvList);
+
+ curBuffer = 0;
+
+ while (curBuffer < BUFFER_PROC_LIST_DEPTH) {
+
+ /* get number of buffers that have been completed, this blocks
+ * until we get at least 1 credit or it times out */
+ status = GetCredits(pDev, mbox, &credits);
+
+ if (status != A_OK) {
+ break;
+ }
+
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Got %d messages on mailbox : %d \n",credits, mbox));
+
+ /* get all the buffers that are sitting on the queue */
+ for (i = 0; i < credits; i++) {
+ AR_DEBUG_ASSERT(curBuffer < BUFFER_PROC_LIST_DEPTH);
+ /* recv the current buffer synchronously, the buffers should come back in
+ * order... with padding applied by the target */
+ paddedLength = (recvList[curBuffer].length + (g_BlockSizes[mbox] - 1)) &
+ (~(g_BlockSizes[mbox] - 1));
+
+ status = HIFReadWrite(pDev->HIFDevice,
+ g_MailboxAddrs[mbox],
+ recvList[curBuffer].pBuffer,
+ paddedLength,
+ request,
+ NULL);
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to read %d bytes on mailbox:%d : address:0x%X \n",
+ recvList[curBuffer].length, mbox, g_MailboxAddrs[mbox]));
+ break;
+ }
+
+ totalwPadding += paddedLength;
+ totalBytes += recvList[curBuffer].length;
+ curBuffer++;
+ }
+
+ if (status != A_OK) {
+ break;
+ }
+ /* go back and get some more */
+ credits = 0;
+ }
+
+ if (totalBytes != TEST_BYTES) {
+ AR_DEBUG_ASSERT(FALSE);
+ } else {
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Got all buffers on mbox:%d total recv :%d (w/Padding : %d) \n",
+ mbox, totalBytes, totalwPadding));
+ }
+
+ return status;
+
+
+}
+
+static A_STATUS DoOneMboxHWTest(AR6K_DEVICE *pDev, int mbox)
+{
+ A_STATUS status;
+
+ do {
+ /* send out buffers */
+ status = SendBuffers(pDev,mbox);
+
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Sending buffers Failed : %d mbox:%d\n",status,mbox));
+ break;
+ }
+
+ /* go get them, this will block */
+ status = RecvBuffers(pDev, mbox);
+
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Recv buffers Failed : %d mbox:%d\n",status,mbox));
+ break;
+ }
+
+ /* check the returned data patterns */
+ if (!CheckBuffers()) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Buffer Verify Failed : mbox:%d\n",mbox));
+ status = A_ERROR;
+ break;
+ }
+
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" Send/Recv success! mailbox : %d \n",mbox));
+
+ } while (FALSE);
+
+ return status;
+}
+
+/* here is where the test starts */
+A_STATUS DoMboxHWTest(AR6K_DEVICE *pDev)
+{
+ int i;
+ A_STATUS status;
+ int credits = 0;
+ A_UINT8 params[4];
+ int numBufs;
+ int bufferSize;
+ A_UINT16 temp;
+
+
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest START - \n"));
+
+ do {
+ /* get the addresses for all 4 mailboxes */
+ status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_ADDR,
+ g_MailboxAddrs, sizeof(g_MailboxAddrs));
+
+ if (status != A_OK) {
+ AR_DEBUG_ASSERT(FALSE);
+ break;
+ }
+
+ /* get the block sizes */
+ status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE,
+ g_BlockSizes, sizeof(g_BlockSizes));
+
+ if (status != A_OK) {
+ AR_DEBUG_ASSERT(FALSE);
+ break;
+ }
+
+ /* note, the HIF layer usually reports mbox 0 to have a block size of
+ * 1, but our test wants to run in block-mode for all mailboxes, so we treat all mailboxes
+ * the same. */
+ g_BlockSizes[0] = g_BlockSizes[1];
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Block Size to use: %d \n",g_BlockSizes[0]));
+
+ if (g_BlockSizes[1] > BUFFER_BLOCK_PAD) {
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("%d Block size is too large for buffer pad %d\n",
+ g_BlockSizes[1], BUFFER_BLOCK_PAD));
+ break;
+ }
+
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Waiting for target.... \n"));
+
+ /* the target lets us know it is ready by giving us 1 credit on
+ * mailbox 0 */
+ status = GetCredits(pDev, 0, &credits);
+
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to wait for target ready \n"));
+ break;
+ }
+
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Target is ready ...\n"));
+
+ /* read the first 4 scratch registers */
+ status = HIFReadWrite(pDev->HIFDevice,
+ SCRATCH_ADDRESS,
+ params,
+ 4,
+ HIF_RD_SYNC_BYTE_INC,
+ NULL);
+
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to wait get parameters \n"));
+ break;
+ }
+
+ numBufs = params[0];
+ bufferSize = (int)(((A_UINT16)params[2] << 8) | (A_UINT16)params[1]);
+
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE,
+ ("Target parameters: bufs per mailbox:%d, buffer size:%d bytes (total space: %d, minimum required space (w/padding): %d) \n",
+ numBufs, bufferSize, (numBufs * bufferSize), TOTAL_BYTES));
+
+ if ((numBufs * bufferSize) < TOTAL_BYTES) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Not Enough buffer space to run test! need:%d, got:%d \n",
+ TOTAL_BYTES, (numBufs*bufferSize)));
+ status = A_ERROR;
+ break;
+ }
+
+ temp = GetEndMarker();
+
+ status = HIFReadWrite(pDev->HIFDevice,
+ SCRATCH_ADDRESS + 4,
+ (A_UINT8 *)&temp,
+ 2,
+ HIF_WR_SYNC_BYTE_INC,
+ NULL);
+
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to write end marker \n"));
+ break;
+ }
+
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("End Marker: 0x%X \n",temp));
+
+ temp = (A_UINT16)g_BlockSizes[1];
+ /* convert to a mask */
+ temp = temp - 1;
+ status = HIFReadWrite(pDev->HIFDevice,
+ SCRATCH_ADDRESS + 6,
+ (A_UINT8 *)&temp,
+ 2,
+ HIF_WR_SYNC_BYTE_INC,
+ NULL);
+
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to write block mask \n"));
+ break;
+ }
+
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Set Block Mask: 0x%X \n",temp));
+
+ /* execute the test on each mailbox */
+ for (i = 0; i < AR6K_MAILBOXES; i++) {
+ status = DoOneMboxHWTest(pDev, i);
+ if (status != A_OK) {
+ break;
+ }
+ }
+
+ } while (FALSE);
+
+ if (status == A_OK) {
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest DONE - SUCCESS! - \n"));
+ } else {
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest DONE - FAILED! - \n"));
+ }
+ /* don't let HTC_Start continue, the target is actually not running any HTC code */
+ return A_ERROR;
+}
+#endif
+
+
+