diff options
Diffstat (limited to 'target/linux/realtek')
6 files changed, 154 insertions, 108 deletions
diff --git a/target/linux/realtek/base-files/etc/board.d/02_network b/target/linux/realtek/base-files/etc/board.d/02_network index 1dea2ad5a6..90b45abf94 100644 --- a/target/linux/realtek/base-files/etc/board.d/02_network +++ b/target/linux/realtek/base-files/etc/board.d/02_network @@ -21,6 +21,7 @@ board=$(board_name) board_config_update lan_list=$(ls -1 -v -d /sys/class/net/lan* | xargs -n1 basename | xargs) +lan_list_rev=$(ls -1 -v -d -r /sys/class/net/lan* | xargs -n1 basename | xargs) ucidef_set_bridge_device switch ucidef_set_interface_lan "$lan_list" @@ -30,6 +31,7 @@ lan_mac_end="" label_mac="" case $board in hpe,1920-8g|\ +hpe,1920-8g-poe|\ hpe,1920-16g|\ hpe,1920-24g) label_mac=$(mtd_get_mac_binary factory 0x68) @@ -65,6 +67,9 @@ done [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac case $board in +hpe,1920-8g-poe) + ucidef_set_poe 180 "$lan_list_rev" "lan9 lan10" + ;; netgear,gs110tpp-v1) ucidef_set_poe 130 "$lan_list" "lan9 lan10" ;; diff --git a/target/linux/realtek/base-files/etc/board.d/03_gpio_switches b/target/linux/realtek/base-files/etc/board.d/03_gpio_switches new file mode 100644 index 0000000000..abfcb8e592 --- /dev/null +++ b/target/linux/realtek/base-files/etc/board.d/03_gpio_switches @@ -0,0 +1,16 @@ + +. /lib/functions/uci-defaults.sh + +board_config_update + +board=$(board_name) + +case "$board" in +hpe,1920-8g-poe) + ucidef_add_gpio_switch "fan_ctrl" "Fan control" "456" "0" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/realtek/dts-5.15/rtl8380_hpe_1920-8g-poe.dts b/target/linux/realtek/dts-5.15/rtl8380_hpe_1920-8g-poe.dts new file mode 100644 index 0000000000..3b00c31411 --- /dev/null +++ b/target/linux/realtek/dts-5.15/rtl8380_hpe_1920-8g-poe.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl8380_hpe_1920-8g.dtsi" + +/ { + compatible = "hpe,1920-8g-poe", "realtek,rtl838x-soc"; + model = "HPE 1920-8G-PoE+ (JG922A)"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/target/linux/realtek/dts-5.15/rtl8380_hpe_1920-8g.dts b/target/linux/realtek/dts-5.15/rtl8380_hpe_1920-8g.dts index 6ddb2d8dcc..ac95a00c01 100644 --- a/target/linux/realtek/dts-5.15/rtl8380_hpe_1920-8g.dts +++ b/target/linux/realtek/dts-5.15/rtl8380_hpe_1920-8g.dts @@ -1,115 +1,8 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include "rtl838x.dtsi" -#include "rtl838x_hpe_1920.dtsi" +#include "rtl8380_hpe_1920-8g.dtsi" / { compatible = "hpe,1920-8g", "realtek,rtl838x-soc"; model = "HPE 1920-8G (JG920A)"; - - gpio1: rtl8231-gpio { - compatible = "realtek,rtl8231-gpio"; - #gpio-cells = <2>; - gpio-controller; - indirect-access-bus-id = <0>; - }; - - i2c0: i2c-gpio-0 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp0: sfp-0 { - compatible = "sff,sfp"; - i2c-bus = <&i2c0>; - los-gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 25 GPIO_ACTIVE_LOW>; - // tx-fault and tx-disable unconnected - }; - - i2c1: i2c-gpio-1 { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio1 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - }; - - sfp1: sfp-1 { - compatible = "sff,sfp"; - i2c-bus = <&i2c1>; - los-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio1 21 GPIO_ACTIVE_LOW>; - // tx-fault and tx-disable unconnected - }; -}; - -ðernet0 { - mdio: mdio-bus { - compatible = "realtek,rtl838x-mdio"; - regmap = <ðernet0>; - #address-cells = <1>; - #size-cells = <0>; - - INTERNAL_PHY(8) - INTERNAL_PHY(9) - INTERNAL_PHY(10) - INTERNAL_PHY(11) - INTERNAL_PHY(12) - INTERNAL_PHY(13) - INTERNAL_PHY(14) - INTERNAL_PHY(15) - - INTERNAL_PHY(24) - INTERNAL_PHY(26) - }; -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - SWITCH_PORT(8, 1, internal) - SWITCH_PORT(9, 2, internal) - SWITCH_PORT(10, 3, internal) - SWITCH_PORT(11, 4, internal) - SWITCH_PORT(12, 5, internal) - SWITCH_PORT(13, 6, internal) - SWITCH_PORT(14, 7, internal) - SWITCH_PORT(15, 8, internal) - - port@24 { - reg = <24>; - label = "lan9"; - phy-handle = <&phy24>; - phy-mode = "1000base-x"; - managed = "in-band-status"; - sfp = <&sfp0>; - }; - - port@26 { - reg = <26>; - label = "lan10"; - phy-handle = <&phy26>; - phy-mode = "1000base-x"; - managed = "in-band-status"; - sfp = <&sfp1>; - }; - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; }; diff --git a/target/linux/realtek/dts-5.15/rtl8380_hpe_1920-8g.dtsi b/target/linux/realtek/dts-5.15/rtl8380_hpe_1920-8g.dtsi new file mode 100644 index 0000000000..58f2c1f6c9 --- /dev/null +++ b/target/linux/realtek/dts-5.15/rtl8380_hpe_1920-8g.dtsi @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rtl838x.dtsi" +#include "rtl838x_hpe_1920.dtsi" + +/ { + gpio1: rtl8231-gpio { + compatible = "realtek,rtl8231-gpio"; + #gpio-cells = <2>; + gpio-controller; + indirect-access-bus-id = <0>; + }; + + i2c0: i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp0: sfp-0 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 25 GPIO_ACTIVE_LOW>; + // tx-fault and tx-disable unconnected + }; + + i2c1: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio1 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp1: sfp-1 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 21 GPIO_ACTIVE_LOW>; + // tx-fault and tx-disable unconnected + }; +}; + +ðernet0 { + mdio: mdio-bus { + compatible = "realtek,rtl838x-mdio"; + regmap = <ðernet0>; + #address-cells = <1>; + #size-cells = <0>; + + INTERNAL_PHY(8) + INTERNAL_PHY(9) + INTERNAL_PHY(10) + INTERNAL_PHY(11) + INTERNAL_PHY(12) + INTERNAL_PHY(13) + INTERNAL_PHY(14) + INTERNAL_PHY(15) + + INTERNAL_PHY(24) + INTERNAL_PHY(26) + }; +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT(8, 1, internal) + SWITCH_PORT(9, 2, internal) + SWITCH_PORT(10, 3, internal) + SWITCH_PORT(11, 4, internal) + SWITCH_PORT(12, 5, internal) + SWITCH_PORT(13, 6, internal) + SWITCH_PORT(14, 7, internal) + SWITCH_PORT(15, 8, internal) + + port@24 { + reg = <24>; + label = "lan9"; + phy-handle = <&phy24>; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp0>; + }; + + port@26 { + reg = <26>; + label = "lan10"; + phy-handle = <&phy26>; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sfp1>; + }; + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/image/rtl838x.mk b/target/linux/realtek/image/rtl838x.mk index 7c7bc8a0e5..73930f4d6f 100644 --- a/target/linux/realtek/image/rtl838x.mk +++ b/target/linux/realtek/image/rtl838x.mk @@ -99,6 +99,14 @@ define Device/hpe_1920-8g endef TARGET_DEVICES += hpe_1920-8g +define Device/hpe_1920-8g-poe + $(Device/hpe_1920) + SOC := rtl8380 + DEVICE_MODEL := 1920-8G-PoE+ (JG922A) + H3C_DEVICE_ID := 0x00010025 +endef +TARGET_DEVICES += hpe_1920-8g-poe + define Device/hpe_1920-16g $(Device/hpe_1920) SOC := rtl8382 |