diff options
Diffstat (limited to 'target/linux/realtek/patches-5.10')
10 files changed, 44 insertions, 51 deletions
diff --git a/target/linux/realtek/patches-5.10/300-mips-add-rtl838x-platform.patch b/target/linux/realtek/patches-5.10/300-mips-add-rtl838x-platform.patch index ecc77b2a73..6217d80d3f 100644 --- a/target/linux/realtek/patches-5.10/300-mips-add-rtl838x-platform.patch +++ b/target/linux/realtek/patches-5.10/300-mips-add-rtl838x-platform.patch @@ -1,16 +1,16 @@ --- a/arch/mips/Kbuild.platforms +++ b/arch/mips/Kbuild.platforms -@@ -27,6 +27,7 @@ platforms += pistachio - platforms += pmcs-msp71xx - platforms += pnx833x - platforms += ralink -+platforms += rtl838x - platforms += rb532 - platforms += sgi-ip22 - platforms += sgi-ip27 +@@ -23,6 +23,7 @@ platform-$(CONFIG_PIC32MZDA) += pic32/ + platform-$(CONFIG_MACH_PISTACHIO) += pistachio/ + platform-$(CONFIG_RALINK) += ralink/ + platform-$(CONFIG_MIKROTIK_RB532) += rb532/ ++platform-$(CONFIG_RTL838X) += rtl838x/ + platform-$(CONFIG_SGI_IP22) += sgi-ip22/ + platform-$(CONFIG_SGI_IP27) += sgi-ip27/ + platform-$(CONFIG_SGI_IP28) += sgi-ip22/ --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig -@@ -631,6 +631,26 @@ config RALINK +@@ -627,6 +627,26 @@ config RALINK select ARCH_HAS_RESET_CONTROLLER select RESET_CONTROLLER @@ -36,4 +36,4 @@ + config SGI_IP22 bool "SGI IP22 (Indy/Indigo2)" - select FW_ARC + select ARC_MEMORY diff --git a/target/linux/realtek/patches-5.10/301-gpio-add-rtl8231-driver.patch b/target/linux/realtek/patches-5.10/301-gpio-add-rtl8231-driver.patch index 8a3d4810a6..496d3f4162 100644 --- a/target/linux/realtek/patches-5.10/301-gpio-add-rtl8231-driver.patch +++ b/target/linux/realtek/patches-5.10/301-gpio-add-rtl8231-driver.patch @@ -1,6 +1,6 @@ --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig -@@ -441,6 +441,12 @@ config GPIO_REG +@@ -508,6 +508,12 @@ config GPIO_REG A 32-bit single register GPIO fixed in/out implementation. This can be used to represent any register as a set of GPIO signals. @@ -15,9 +15,9 @@ depends on MFD_SYSCON --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile -@@ -117,6 +117,7 @@ obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t - obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o +@@ -126,6 +126,7 @@ obj-$(CONFIG_GPIO_RDA) += gpio-rda.o obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o + obj-$(CONFIG_GPIO_REALTEK_OTTO) += gpio-realtek-otto.o obj-$(CONFIG_GPIO_REG) += gpio-reg.o +obj-$(CONFIG_GPIO_RTL8231) += gpio-rtl8231.o obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o diff --git a/target/linux/realtek/patches-5.10/302-clocksource-add-rtl9300-driver.patch b/target/linux/realtek/patches-5.10/302-clocksource-add-rtl9300-driver.patch index 1c41db75b2..a78f070d63 100644 --- a/target/linux/realtek/patches-5.10/302-clocksource-add-rtl9300-driver.patch +++ b/target/linux/realtek/patches-5.10/302-clocksource-add-rtl9300-driver.patch @@ -1,6 +1,6 @@ --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig -@@ -127,6 +127,15 @@ config RDA_TIMER +@@ -126,6 +126,15 @@ config RDA_TIMER help Enables the support for the RDA Micro timer driver. @@ -16,15 +16,9 @@ config SUN4I_TIMER bool "Sun4i timer driver" if COMPILE_TEST depends on HAS_IOMEM -@@ -696,5 +705,4 @@ config INGENIC_TIMER - select IRQ_DOMAIN - help - Support for the timer/counter unit of the Ingenic JZ SoCs. -- - endmenu --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile -@@ -61,6 +61,7 @@ obj-$(CONFIG_MILBEAUT_TIMER) += timer-mi +@@ -63,6 +63,7 @@ obj-$(CONFIG_MILBEAUT_TIMER) += timer-mi obj-$(CONFIG_SPRD_TIMER) += timer-sprd.o obj-$(CONFIG_NPCM7XX_TIMER) += timer-npcm7xx.o obj-$(CONFIG_RDA_TIMER) += timer-rda.o diff --git a/target/linux/realtek/patches-5.10/700-net-dsa-add-support-for-rtl838x-switch.patch b/target/linux/realtek/patches-5.10/700-net-dsa-add-support-for-rtl838x-switch.patch index bb6f83e55d..af5fb18c26 100644 --- a/target/linux/realtek/patches-5.10/700-net-dsa-add-support-for-rtl838x-switch.patch +++ b/target/linux/realtek/patches-5.10/700-net-dsa-add-support-for-rtl838x-switch.patch @@ -1,6 +1,6 @@ --- a/drivers/net/dsa/Kconfig +++ b/drivers/net/dsa/Kconfig -@@ -63,6 +63,8 @@ config NET_DSA_QCA8K +@@ -67,6 +67,8 @@ config NET_DSA_QCA8K This enables support for the Qualcomm Atheros QCA8K Ethernet switch chips. @@ -11,8 +11,8 @@ depends on NET_DSA --- a/drivers/net/dsa/Makefile +++ b/drivers/net/dsa/Makefile -@@ -21,3 +21,4 @@ obj-y += b53/ - obj-y += microchip/ - obj-y += mv88e6xxx/ +@@ -23,3 +23,4 @@ obj-y += mv88e6xxx/ + obj-y += ocelot/ + obj-y += qca/ obj-y += sja1105/ +obj-y += rtl83xx/ diff --git a/target/linux/realtek/patches-5.10/701-net-dsa-add-rtl838x-support-for-tag-trailer.patch b/target/linux/realtek/patches-5.10/701-net-dsa-add-rtl838x-support-for-tag-trailer.patch index 803614e7c0..8c7efb58f3 100644 --- a/target/linux/realtek/patches-5.10/701-net-dsa-add-rtl838x-support-for-tag-trailer.patch +++ b/target/linux/realtek/patches-5.10/701-net-dsa-add-rtl838x-support-for-tag-trailer.patch @@ -1,8 +1,8 @@ --- a/net/dsa/tag_trailer.c +++ b/net/dsa/tag_trailer.c -@@ -44,7 +44,12 @@ static struct sk_buff *trailer_xmit(stru +@@ -17,7 +17,12 @@ static struct sk_buff *trailer_xmit(stru - trailer = skb_put(nskb, 4); + trailer = skb_put(skb, 4); trailer[0] = 0x80; + +#ifdef CONFIG_NET_DSA_RTL83XX @@ -13,7 +13,7 @@ trailer[2] = 0x10; trailer[3] = 0x00; -@@ -61,12 +66,23 @@ static struct sk_buff *trailer_rcv(struc +@@ -34,12 +39,23 @@ static struct sk_buff *trailer_rcv(struc return NULL; trailer = skb_tail_pointer(skb) - 4; diff --git a/target/linux/realtek/patches-5.10/702-net-ethernet-add-support-for-rtl838x-ethernet.patch b/target/linux/realtek/patches-5.10/702-net-ethernet-add-support-for-rtl838x-ethernet.patch index b3a6dd9a72..1a6668550d 100644 --- a/target/linux/realtek/patches-5.10/702-net-ethernet-add-support-for-rtl838x-ethernet.patch +++ b/target/linux/realtek/patches-5.10/702-net-ethernet-add-support-for-rtl838x-ethernet.patch @@ -1,6 +1,6 @@ --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig -@@ -163,6 +163,13 @@ source "drivers/net/ethernet/rdc/Kconfig +@@ -162,6 +162,13 @@ source "drivers/net/ethernet/rdc/Kconfig source "drivers/net/ethernet/realtek/Kconfig" source "drivers/net/ethernet/renesas/Kconfig" source "drivers/net/ethernet/rocker/Kconfig" @@ -16,7 +16,7 @@ source "drivers/net/ethernet/sfc/Kconfig" --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile -@@ -76,6 +76,7 @@ obj-$(CONFIG_NET_VENDOR_REALTEK) += real +@@ -75,6 +75,7 @@ obj-$(CONFIG_NET_VENDOR_REALTEK) += real obj-$(CONFIG_NET_VENDOR_RENESAS) += renesas/ obj-$(CONFIG_NET_VENDOR_RDC) += rdc/ obj-$(CONFIG_NET_VENDOR_ROCKER) += rocker/ diff --git a/target/linux/realtek/patches-5.10/703-include-linux-add-phy-ops-for-rtl838x.patch b/target/linux/realtek/patches-5.10/703-include-linux-add-phy-ops-for-rtl838x.patch index 3682eb30a3..0a771b64f0 100644 --- a/target/linux/realtek/patches-5.10/703-include-linux-add-phy-ops-for-rtl838x.patch +++ b/target/linux/realtek/patches-5.10/703-include-linux-add-phy-ops-for-rtl838x.patch @@ -1,9 +1,9 @@ --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -645,6 +645,10 @@ struct phy_driver { - struct ethtool_tunable *tuna, - const void *data); - int (*set_loopback)(struct phy_device *dev, bool enable); +@@ -881,6 +881,10 @@ struct phy_driver { + int (*get_sqi)(struct phy_device *dev); + /** @get_sqi_max: Get the maximum signal quality indication */ + int (*get_sqi_max)(struct phy_device *dev); + int (*get_port)(struct phy_device *dev); + int (*set_port)(struct phy_device *dev, int port); + int (*get_eee)(struct phy_device *dev, struct ethtool_eee *e); diff --git a/target/linux/realtek/patches-5.10/704-drivers-net-phy-eee-support-for-rtl838x.patch b/target/linux/realtek/patches-5.10/704-drivers-net-phy-eee-support-for-rtl838x.patch index 7743147ea3..cca724293d 100644 --- a/target/linux/realtek/patches-5.10/704-drivers-net-phy-eee-support-for-rtl838x.patch +++ b/target/linux/realtek/patches-5.10/704-drivers-net-phy-eee-support-for-rtl838x.patch @@ -1,18 +1,18 @@ --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c -@@ -1242,6 +1242,11 @@ int phylink_ethtool_ksettings_set(struct - - /* If we have a PHY, configure the phy */ - if (pl->phydev) { +@@ -1425,6 +1425,11 @@ int phylink_ethtool_ksettings_set(struct + * the presence of a PHY, this should not be changed as that + * should be determined from the media side advertisement. + */ + if (pl->phydev->drv->get_port && pl->phydev->drv->set_port) { + if(pl->phydev->drv->get_port(pl->phydev) != kset->base.port) { + pl->phydev->drv->set_port(pl->phydev, kset->base.port); + } + } - ret = phy_ethtool_ksettings_set(pl->phydev, &our_kset); - if (ret) - return ret; -@@ -1420,8 +1425,11 @@ int phylink_ethtool_get_eee(struct phyli + return phy_ethtool_ksettings_set(pl->phydev, kset); + } + +@@ -1700,8 +1705,11 @@ int phylink_ethtool_get_eee(struct phyli ASSERT_RTNL(); @@ -25,7 +25,7 @@ return ret; } -@@ -1438,9 +1446,11 @@ int phylink_ethtool_set_eee(struct phyli +@@ -1718,8 +1726,11 @@ int phylink_ethtool_set_eee(struct phyli ASSERT_RTNL(); @@ -34,8 +34,7 @@ + if (pl->phydev->drv->set_eee) + return pl->phydev->drv->set_eee(pl->phydev, eee); ret = phy_ethtool_set_eee(pl->phydev, eee); -- + } + return ret; } - EXPORT_SYMBOL_GPL(phylink_ethtool_set_eee); diff --git a/target/linux/realtek/patches-5.10/705-add-rtl-phy.patch b/target/linux/realtek/patches-5.10/705-add-rtl-phy.patch index c1b74f7fe4..dbd936b446 100644 --- a/target/linux/realtek/patches-5.10/705-add-rtl-phy.patch +++ b/target/linux/realtek/patches-5.10/705-add-rtl-phy.patch @@ -1,7 +1,7 @@ --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -540,6 +540,12 @@ config REALTEK_PHY - ---help--- +@@ -324,6 +324,12 @@ config REALTEK_PHY + help Supports the Realtek 821x PHY. +config REALTEK_SOC_PHY @@ -11,11 +11,11 @@ + Supports the PHYs found in combination with Realtek Switch SoCs + config RENESAS_PHY - tristate "Driver for Renesas PHYs" - ---help--- + tristate "Renesas PHYs" + help --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile -@@ -102,6 +102,7 @@ obj-$(CONFIG_NATIONAL_PHY) += national.o +@@ -86,6 +86,7 @@ obj-$(CONFIG_NATIONAL_PHY) += national.o obj-$(CONFIG_NXP_TJA11XX_PHY) += nxp-tja11xx.o obj-$(CONFIG_QSEMI_PHY) += qsemi.o obj-$(CONFIG_REALTEK_PHY) += realtek.o diff --git a/target/linux/realtek/patches-5.10/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch b/target/linux/realtek/patches-5.10/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch index ca6deb74d8..d36299d43b 100644 --- a/target/linux/realtek/patches-5.10/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch +++ b/target/linux/realtek/patches-5.10/705-include-linux-phy-increase-phy-address-number-for-rtl839x.patch @@ -1,6 +1,6 @@ --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -188,7 +188,7 @@ static inline const char *phy_modes(phy_ +@@ -226,7 +226,7 @@ static inline const char *phy_modes(phy_ #define PHY_INIT_TIMEOUT 100000 #define PHY_FORCE_TIMEOUT 10 |