diff options
Diffstat (limited to 'target/linux/realtek/patches-5.10/311-add-i2c-mux-rtl9300-support.patch')
-rw-r--r-- | target/linux/realtek/patches-5.10/311-add-i2c-mux-rtl9300-support.patch | 46 |
1 files changed, 0 insertions, 46 deletions
diff --git a/target/linux/realtek/patches-5.10/311-add-i2c-mux-rtl9300-support.patch b/target/linux/realtek/patches-5.10/311-add-i2c-mux-rtl9300-support.patch deleted file mode 100644 index d0bfba4538..0000000000 --- a/target/linux/realtek/patches-5.10/311-add-i2c-mux-rtl9300-support.patch +++ /dev/null @@ -1,46 +0,0 @@ -From f4bdb7fdccdfe3fa382abe77f72a16c2f2e6add0 Mon Sep 17 00:00:00 2001 -From: Birger Koblitz <git@birger-koblitz.de> -Date: Sat, 11 Dec 2021 20:25:37 +0100 -Subject: [PATCH] realtek: Add support for RTL9300/RTL9310 I2C multiplexing - -The RTL9300/RTL9310 I2C controllers have support for 2 independent I2C -masters, each with a fixed SCL pin, that cannot be changed. Each of these -masters can use 8 (RTL9300) or 16 (RTL9310) different pins for SDA. -This multiplexer directly controls the two masters and their shared -IO configuration registers to allow multiplexing between any of these -busses. The two masters cannot be used in parallel as the multiplex -is protected by a standard multiplex lock. - -Submitted-by: Birger Koblitz <git@birger-koblitz.de> ---- - drivers/i2c/muxes/Kconfig | 9 +++++++ - drivers/i2c/muxes/Makefile | 1 + - 2 files changed, 10 insertions(+) - ---- a/drivers/i2c/muxes/Kconfig -+++ b/drivers/i2c/muxes/Kconfig -@@ -99,6 +99,15 @@ config I2C_MUX_REG - This driver can also be built as a module. If so, the module - will be called i2c-mux-reg. - -+config I2C_MUX_RTL9300 -+ tristate "RTL9300 based I2C multiplexer" -+ help -+ If you say yes to this option, support will be included for a -+ RTL9300 based I2C multiplexer. -+ -+ This driver can also be built as a module. If so, the module -+ will be called i2c-mux-reg. -+ - config I2C_DEMUX_PINCTRL - tristate "pinctrl-based I2C demultiplexer" - depends on PINCTRL && OF ---- a/drivers/i2c/muxes/Makefile -+++ b/drivers/i2c/muxes/Makefile -@@ -14,5 +14,6 @@ obj-$(CONFIG_I2C_MUX_PCA9541) += i2c-mux - obj-$(CONFIG_I2C_MUX_PCA954x) += i2c-mux-pca954x.o - obj-$(CONFIG_I2C_MUX_PINCTRL) += i2c-mux-pinctrl.o - obj-$(CONFIG_I2C_MUX_REG) += i2c-mux-reg.o -+obj-$(CONFIG_I2C_MUX_RTL9300) += i2c-mux-rtl9300.o - - ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG |