diff options
Diffstat (limited to 'target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/qos.c')
-rw-r--r-- | target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/qos.c | 576 |
1 files changed, 576 insertions, 0 deletions
diff --git a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/qos.c b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/qos.c new file mode 100644 index 0000000000..2fc8d37f3e --- /dev/null +++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/qos.c @@ -0,0 +1,576 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include <net/dsa.h> +#include <linux/delay.h> + +#include <asm/mach-rtl838x/mach-rtl83xx.h> +#include "rtl83xx.h" + +static struct rtl838x_switch_priv *switch_priv; +extern struct rtl83xx_soc_info soc_info; + +enum scheduler_type { + WEIGHTED_FAIR_QUEUE = 0, + WEIGHTED_ROUND_ROBIN, +}; + +int max_available_queue[] = {0, 1, 2, 3, 4, 5, 6, 7}; +int default_queue_weights[] = {1, 1, 1, 1, 1, 1, 1, 1}; +int dot1p_priority_remapping[] = {0, 1, 2, 3, 4, 5, 6, 7}; + +static void rtl839x_read_scheduling_table(int port) +{ + u32 cmd = 1 << 9 /* Execute cmd */ + | 0 << 8 /* Read */ + | 0 << 6 /* Table type 0b00 */ + | (port & 0x3f); + rtl839x_exec_tbl2_cmd(cmd); +} + +static void rtl839x_write_scheduling_table(int port) +{ + u32 cmd = 1 << 9 /* Execute cmd */ + | 1 << 8 /* Write */ + | 0 << 6 /* Table type 0b00 */ + | (port & 0x3f); + rtl839x_exec_tbl2_cmd(cmd); +} + +static void rtl839x_read_out_q_table(int port) +{ + u32 cmd = 1 << 9 /* Execute cmd */ + | 0 << 8 /* Read */ + | 2 << 6 /* Table type 0b10 */ + | (port & 0x3f); + rtl839x_exec_tbl2_cmd(cmd); +} + +static void rtl838x_storm_enable(struct rtl838x_switch_priv *priv, int port, bool enable) +{ + // Enable Storm control for that port for UC, MC, and BC + if (enable) + sw_w32(0x7, RTL838X_STORM_CTRL_LB_CTRL(port)); + else + sw_w32(0x0, RTL838X_STORM_CTRL_LB_CTRL(port)); +} + +u32 rtl838x_get_egress_rate(struct rtl838x_switch_priv *priv, int port) +{ + u32 rate; + + if (port > priv->cpu_port) + return 0; + rate = sw_r32(RTL838X_SCHED_P_EGR_RATE_CTRL(port)) & 0x3fff; + return rate; +} + +/* Sets the rate limit, 10MBit/s is equal to a rate value of 625 */ +int rtl838x_set_egress_rate(struct rtl838x_switch_priv *priv, int port, u32 rate) +{ + u32 old_rate; + + if (port > priv->cpu_port) + return -1; + + old_rate = sw_r32(RTL838X_SCHED_P_EGR_RATE_CTRL(port)); + sw_w32(rate, RTL838X_SCHED_P_EGR_RATE_CTRL(port)); + + return old_rate; +} + +/* Set the rate limit for a particular queue in Bits/s + * units of the rate is 16Kbps + */ +void rtl838x_egress_rate_queue_limit(struct rtl838x_switch_priv *priv, int port, + int queue, u32 rate) +{ + if (port > priv->cpu_port) + return; + if (queue > 7) + return; + sw_w32(rate, RTL838X_SCHED_Q_EGR_RATE_CTRL(port, queue)); +} + +static void rtl838x_rate_control_init(struct rtl838x_switch_priv *priv) +{ + int i; + + pr_info("Enabling Storm control\n"); + // TICK_PERIOD_PPS + if (priv->id == 0x8380) + sw_w32_mask(0x3ff << 20, 434 << 20, RTL838X_SCHED_LB_TICK_TKN_CTRL_0); + + // Set burst rate + sw_w32(0x00008000, RTL838X_STORM_CTRL_BURST_0); // UC + sw_w32(0x80008000, RTL838X_STORM_CTRL_BURST_1); // MC and BC + + // Set burst Packets per Second to 32 + sw_w32(0x00000020, RTL838X_STORM_CTRL_BURST_PPS_0); // UC + sw_w32(0x00200020, RTL838X_STORM_CTRL_BURST_PPS_1); // MC and BC + + // Include IFG in storm control, rate based on bytes/s (0 = packets) + sw_w32_mask(0, 1 << 6 | 1 << 5, RTL838X_STORM_CTRL); + // Bandwidth control includes preamble and IFG (10 Bytes) + sw_w32_mask(0, 1, RTL838X_SCHED_CTRL); + + // On SoCs except RTL8382M, set burst size of port egress + if (priv->id != 0x8382) + sw_w32_mask(0xffff, 0x800, RTL838X_SCHED_LB_THR); + + /* Enable storm control on all ports with a PHY and limit rates, + * for UC and MC for both known and unknown addresses */ + for (i = 0; i < priv->cpu_port; i++) { + if (priv->ports[i].phy) { + sw_w32((1 << 18) | 0x8000, RTL838X_STORM_CTRL_PORT_UC(i)); + sw_w32((1 << 18) | 0x8000, RTL838X_STORM_CTRL_PORT_MC(i)); + sw_w32(0x8000, RTL838X_STORM_CTRL_PORT_BC(i)); + rtl838x_storm_enable(priv, i, true); + } + } + + // Attack prevention, enable all attack prevention measures + //sw_w32(0x1ffff, RTL838X_ATK_PRVNT_CTRL); + /* Attack prevention, drop (bit = 0) problematic packets on all ports. + * Setting bit = 1 means: trap to CPU + */ + //sw_w32(0, RTL838X_ATK_PRVNT_ACT); + // Enable attack prevention on all ports + //sw_w32(0x0fffffff, RTL838X_ATK_PRVNT_PORT_EN); +} + +/* Sets the rate limit, 10MBit/s is equal to a rate value of 625 */ +u32 rtl839x_get_egress_rate(struct rtl838x_switch_priv *priv, int port) +{ + u32 rate; + + pr_debug("%s: Getting egress rate on port %d to %d\n", __func__, port, rate); + if (port >= priv->cpu_port) + return 0; + + mutex_lock(&priv->reg_mutex); + + rtl839x_read_scheduling_table(port); + + rate = sw_r32(RTL839X_TBL_ACCESS_DATA_2(7)); + rate <<= 12; + rate |= sw_r32(RTL839X_TBL_ACCESS_DATA_2(8)) >> 20; + + mutex_unlock(&priv->reg_mutex); + + return rate; +} + +/* Sets the rate limit, 10MBit/s is equal to a rate value of 625, returns previous rate */ +int rtl839x_set_egress_rate(struct rtl838x_switch_priv *priv, int port, u32 rate) +{ + u32 old_rate; + + pr_debug("%s: Setting egress rate on port %d to %d\n", __func__, port, rate); + if (port >= priv->cpu_port) + return -1; + + mutex_lock(&priv->reg_mutex); + + rtl839x_read_scheduling_table(port); + + old_rate = sw_r32(RTL839X_TBL_ACCESS_DATA_2(7)) & 0xff; + old_rate <<= 12; + old_rate |= sw_r32(RTL839X_TBL_ACCESS_DATA_2(8)) >> 20; + sw_w32_mask(0xff, (rate >> 12) & 0xff, RTL839X_TBL_ACCESS_DATA_2(7)); + sw_w32_mask(0xfff << 20, rate << 20, RTL839X_TBL_ACCESS_DATA_2(8)); + + rtl839x_write_scheduling_table(port); + + mutex_unlock(&priv->reg_mutex); + + return old_rate; +} + +/* Set the rate limit for a particular queue in Bits/s + * units of the rate is 16Kbps + */ +void rtl839x_egress_rate_queue_limit(struct rtl838x_switch_priv *priv, int port, + int queue, u32 rate) +{ + int lsb = 128 + queue * 20; + int low_byte = 8 - (lsb >> 5); + int start_bit = lsb - (low_byte << 5); + u32 high_mask = 0xfffff >> (32 - start_bit); + + pr_debug("%s: Setting egress rate on port %d, queue %d to %d\n", + __func__, port, queue, rate); + if (port >= priv->cpu_port) + return; + if (queue > 7) + return; + + mutex_lock(&priv->reg_mutex); + + rtl839x_read_scheduling_table(port); + + sw_w32_mask(0xfffff << start_bit, (rate & 0xfffff) << start_bit, + RTL839X_TBL_ACCESS_DATA_2(low_byte)); + if (high_mask) + sw_w32_mask(high_mask, (rate & 0xfffff) >> (32- start_bit), + RTL839X_TBL_ACCESS_DATA_2(low_byte - 1)); + + rtl839x_write_scheduling_table(port); + + mutex_unlock(&priv->reg_mutex); +} + +static void rtl839x_rate_control_init(struct rtl838x_switch_priv *priv) +{ + int p, q; + + pr_info("%s: enabling rate control\n", __func__); + /* Tick length and token size settings for SoC with 250MHz, + * RTL8350 family would use 50MHz + */ + // Set the special tick period + sw_w32(976563, RTL839X_STORM_CTRL_SPCL_LB_TICK_TKN_CTRL); + // Ingress tick period and token length 10G + sw_w32(18 << 11 | 151, RTL839X_IGR_BWCTRL_LB_TICK_TKN_CTRL_0); + // Ingress tick period and token length 1G + sw_w32(245 << 11 | 129, RTL839X_IGR_BWCTRL_LB_TICK_TKN_CTRL_1); + // Egress tick period 10G, bytes/token 10G and tick period 1G, bytes/token 1G + sw_w32(18 << 24 | 151 << 16 | 185 << 8 | 97, RTL839X_SCHED_LB_TICK_TKN_CTRL); + // Set the tick period of the CPU and the Token Len + sw_w32(3815 << 8 | 1, RTL839X_SCHED_LB_TICK_TKN_PPS_CTRL); + + // Set the Weighted Fair Queueing burst size + sw_w32_mask(0xffff, 4500, RTL839X_SCHED_LB_THR); + + // Storm-rate calculation is based on bytes/sec (bit 5), include IFG (bit 6) + sw_w32_mask(0, 1 << 5 | 1 << 6, RTL839X_STORM_CTRL); + + /* Based on the rate control mode being bytes/s + * set tick period and token length for 10G + */ + sw_w32(18 << 10 | 151, RTL839X_STORM_CTRL_LB_TICK_TKN_CTRL_0); + /* and for 1G ports */ + sw_w32(246 << 10 | 129, RTL839X_STORM_CTRL_LB_TICK_TKN_CTRL_1); + + /* Set default burst rates on all ports (the same for 1G / 10G) with a PHY + * for UC, MC and BC + * For 1G port, the minimum burst rate is 1700, maximum 65535, + * For 10G ports it is 2650 and 1048575 respectively */ + for (p = 0; p < priv->cpu_port; p++) { + if (priv->ports[p].phy && !priv->ports[p].is10G) { + sw_w32_mask(0xffff, 0x8000, RTL839X_STORM_CTRL_PORT_UC_1(p)); + sw_w32_mask(0xffff, 0x8000, RTL839X_STORM_CTRL_PORT_MC_1(p)); + sw_w32_mask(0xffff, 0x8000, RTL839X_STORM_CTRL_PORT_BC_1(p)); + } + } + + /* Setup ingress/egress per-port rate control */ + for (p = 0; p < priv->cpu_port; p++) { + if (!priv->ports[p].phy) + continue; + + if (priv->ports[p].is10G) + rtl839x_set_egress_rate(priv, p, 625000); // 10GB/s + else + rtl839x_set_egress_rate(priv, p, 62500); // 1GB/s + + // Setup queues: all RTL83XX SoCs have 8 queues, maximum rate + for (q = 0; q < 8; q++) + rtl839x_egress_rate_queue_limit(priv, p, q, 0xfffff); + + if (priv->ports[p].is10G) { + // Set high threshold to maximum + sw_w32_mask(0xffff, 0xffff, RTL839X_IGR_BWCTRL_PORT_CTRL_10G_0(p)); + } else { + // Set high threshold to maximum + sw_w32_mask(0xffff, 0xffff, RTL839X_IGR_BWCTRL_PORT_CTRL_1(p)); + } + } + + // Set global ingress low watermark rate + sw_w32(65532, RTL839X_IGR_BWCTRL_CTRL_LB_THR); +} + + + +void rtl838x_setup_prio2queue_matrix(int *min_queues) +{ + int i; + u32 v; + + pr_info("Current Intprio2queue setting: %08x\n", sw_r32(RTL838X_QM_INTPRI2QID_CTRL)); + for (i = 0; i < MAX_PRIOS; i++) + v |= i << (min_queues[i] * 3); + sw_w32(v, RTL838X_QM_INTPRI2QID_CTRL); +} + +void rtl839x_setup_prio2queue_matrix(int *min_queues) +{ + int i, q; + + pr_info("Current Intprio2queue setting: %08x\n", sw_r32(RTL839X_QM_INTPRI2QID_CTRL(0))); + for (i = 0; i < MAX_PRIOS; i++) { + q = min_queues[i]; + sw_w32(i << (q * 3), RTL839X_QM_INTPRI2QID_CTRL(q)); + } +} + +/* Sets the CPU queue depending on the internal priority of a packet */ +void rtl83xx_setup_prio2queue_cpu_matrix(int *max_queues) +{ + int reg = soc_info.family == RTL8380_FAMILY_ID ? RTL838X_QM_PKT2CPU_INTPRI_MAP + : RTL839X_QM_PKT2CPU_INTPRI_MAP; + int i; + u32 v; + + pr_info("QM_PKT2CPU_INTPRI_MAP: %08x\n", sw_r32(reg)); + for (i = 0; i < MAX_PRIOS; i++) + v |= max_queues[i] << (i * 3); + sw_w32(v, reg); +} + +void rtl83xx_setup_default_prio2queue(void) +{ + if (soc_info.family == RTL8380_FAMILY_ID) { + rtl838x_setup_prio2queue_matrix(max_available_queue); + } else { + rtl839x_setup_prio2queue_matrix(max_available_queue); + } + rtl83xx_setup_prio2queue_cpu_matrix(max_available_queue); +} + +/* Sets the output queue assigned to a port, the port can be the CPU-port */ +void rtl839x_set_egress_queue(int port, int queue) +{ + sw_w32(queue << ((port % 10) *3), RTL839X_QM_PORT_QNUM(port)); +} + +/* Sets the priority assigned of an ingress port, the port can be the CPU-port */ +void rtl83xx_set_ingress_priority(int port, int priority) +{ + if (soc_info.family == RTL8380_FAMILY_ID) + sw_w32(priority << ((port % 10) *3), RTL838X_PRI_SEL_PORT_PRI(port)); + else + sw_w32(priority << ((port % 10) *3), RTL839X_PRI_SEL_PORT_PRI(port)); + +} + +int rtl839x_get_scheduling_algorithm(struct rtl838x_switch_priv *priv, int port) +{ + u32 v; + + mutex_lock(&priv->reg_mutex); + + rtl839x_read_scheduling_table(port); + v = sw_r32(RTL839X_TBL_ACCESS_DATA_2(8)); + + mutex_unlock(&priv->reg_mutex); + + if (v & BIT(19)) + return WEIGHTED_ROUND_ROBIN; + return WEIGHTED_FAIR_QUEUE; +} + +void rtl839x_set_scheduling_algorithm(struct rtl838x_switch_priv *priv, int port, + enum scheduler_type sched) +{ + enum scheduler_type t = rtl839x_get_scheduling_algorithm(priv, port); + u32 v, oam_state, oam_port_state; + u32 count; + int i, egress_rate; + + mutex_lock(&priv->reg_mutex); + /* Check whether we need to empty the egress queue of that port due to Errata E0014503 */ + if (sched == WEIGHTED_FAIR_QUEUE && t == WEIGHTED_ROUND_ROBIN && port != priv->cpu_port) { + // Read Operations, Adminstatrion and Management control register + oam_state = sw_r32(RTL839X_OAM_CTRL); + + // Get current OAM state + oam_port_state = sw_r32(RTL839X_OAM_PORT_ACT_CTRL(port)); + + // Disable OAM to block traffice + v = sw_r32(RTL839X_OAM_CTRL); + sw_w32_mask(0, 1, RTL839X_OAM_CTRL); + v = sw_r32(RTL839X_OAM_CTRL); + + // Set to trap action OAM forward (bits 1, 2) and OAM Mux Action Drop (bit 0) + sw_w32(0x2, RTL839X_OAM_PORT_ACT_CTRL(port)); + + // Set port egress rate to unlimited + egress_rate = rtl839x_set_egress_rate(priv, port, 0xFFFFF); + + // Wait until the egress used page count of that port is 0 + i = 0; + do { + usleep_range(100, 200); + rtl839x_read_out_q_table(port); + count = sw_r32(RTL839X_TBL_ACCESS_DATA_2(6)); + count >>= 20; + i++; + } while (i < 3500 && count > 0); + } + + // Actually set the scheduling algorithm + rtl839x_read_scheduling_table(port); + sw_w32_mask(BIT(19), sched ? BIT(19) : 0, RTL839X_TBL_ACCESS_DATA_2(8)); + rtl839x_write_scheduling_table(port); + + if (sched == WEIGHTED_FAIR_QUEUE && t == WEIGHTED_ROUND_ROBIN && port != priv->cpu_port) { + // Restore OAM state to control register + sw_w32(oam_state, RTL839X_OAM_CTRL); + + // Restore trap action state + sw_w32(oam_port_state, RTL839X_OAM_PORT_ACT_CTRL(port)); + + // Restore port egress rate + rtl839x_set_egress_rate(priv, port, egress_rate); + } + + mutex_unlock(&priv->reg_mutex); +} + +void rtl839x_set_scheduling_queue_weights(struct rtl838x_switch_priv *priv, int port, + int *queue_weights) +{ + int i, lsb, low_byte, start_bit, high_mask; + + mutex_lock(&priv->reg_mutex); + + rtl839x_read_scheduling_table(port); + + for (i = 0; i < 8; i++) { + lsb = 48 + i * 8; + low_byte = 8 - (lsb >> 5); + start_bit = lsb - (low_byte << 5); + high_mask = 0x3ff >> (32 - start_bit); + sw_w32_mask(0x3ff << start_bit, (queue_weights[i] & 0x3ff) << start_bit, + RTL839X_TBL_ACCESS_DATA_2(low_byte)); + if (high_mask) + sw_w32_mask(high_mask, (queue_weights[i] & 0x3ff) >> (32- start_bit), + RTL839X_TBL_ACCESS_DATA_2(low_byte - 1)); + } + + rtl839x_write_scheduling_table(port); + mutex_unlock(&priv->reg_mutex); +} + +void rtl838x_config_qos(void) +{ + int i, p; + u32 v; + + pr_info("Setting up RTL838X QoS\n"); + pr_info("RTL838X_PRI_SEL_TBL_CTRL(i): %08x\n", sw_r32(RTL838X_PRI_SEL_TBL_CTRL(0))); + rtl83xx_setup_default_prio2queue(); + + // Enable inner (bit 12) and outer (bit 13) priority remapping from DSCP + sw_w32_mask(0, BIT(12) | BIT(13), RTL838X_PRI_DSCP_INVLD_CTRL0); + + /* Set default weight for calculating internal priority, in prio selection group 0 + * Port based (prio 3), Port outer-tag (4), DSCP (5), Inner Tag (6), Outer Tag (7) + */ + v = 3 | (4 << 3) | (5 << 6) | (6 << 9) | (7 << 12); + sw_w32(v, RTL838X_PRI_SEL_TBL_CTRL(0)); + + // Set the inner and outer priority one-to-one to re-marked outer dot1p priority + v = 0; + for (p = 0; p < 8; p++) + v |= p << (3 * p); + sw_w32(v, RTL838X_RMK_OPRI_CTRL); + sw_w32(v, RTL838X_RMK_IPRI_CTRL); + + v = 0; + for (p = 0; p < 8; p++) + v |= (dot1p_priority_remapping[p] & 0x7) << (p * 3); + sw_w32(v, RTL838X_PRI_SEL_IPRI_REMAP); + + // On all ports set scheduler type to WFQ + for (i = 0; i <= soc_info.cpu_port; i++) + sw_w32(0, RTL838X_SCHED_P_TYPE_CTRL(i)); + + // Enable egress scheduler for CPU-Port + sw_w32_mask(0, BIT(8), RTL838X_SCHED_LB_CTRL(soc_info.cpu_port)); + + // Enable egress drop allways on + sw_w32_mask(0, BIT(11), RTL838X_FC_P_EGR_DROP_CTRL(soc_info.cpu_port)); + + // Give special trap frames priority 7 (BPDUs) and routing exceptions: + sw_w32_mask(0, 7 << 3 | 7, RTL838X_QM_PKT2CPU_INTPRI_2); + // Give RMA frames priority 7: + sw_w32_mask(0, 7, RTL838X_QM_PKT2CPU_INTPRI_1); +} + +void rtl839x_config_qos(void) +{ + int port, p, q; + u32 v; + struct rtl838x_switch_priv *priv = switch_priv; + + pr_info("Setting up RTL839X QoS\n"); + pr_info("RTL839X_PRI_SEL_TBL_CTRL(i): %08x\n", sw_r32(RTL839X_PRI_SEL_TBL_CTRL(0))); + rtl83xx_setup_default_prio2queue(); + + for (port = 0; port < soc_info.cpu_port; port++) + sw_w32(7, RTL839X_QM_PORT_QNUM(port)); + + // CPU-port gets queue number 7 + sw_w32(7, RTL839X_QM_PORT_QNUM(soc_info.cpu_port)); + + for (port = 0; port <= soc_info.cpu_port; port++) { + rtl83xx_set_ingress_priority(port, 0); + rtl839x_set_scheduling_algorithm(priv, port, WEIGHTED_FAIR_QUEUE); + rtl839x_set_scheduling_queue_weights(priv, port, default_queue_weights); + // Do re-marking based on outer tag + sw_w32_mask(0, BIT(port % 32), RTL839X_RMK_PORT_DEI_TAG_CTRL(port)); + } + + // Remap dot1p priorities to internal priority, for this the outer tag needs be re-marked + v = 0; + for (p = 0; p < 8; p++) + v |= (dot1p_priority_remapping[p] & 0x7) << (p * 3); + sw_w32(v, RTL839X_PRI_SEL_IPRI_REMAP); + + /* Configure Drop Precedence for Drop Eligible Indicator (DEI) + * Index 0: 0 + * Index 1: 2 + * Each indicator is 2 bits long + */ + sw_w32(2 << 2, RTL839X_PRI_SEL_DEI2DP_REMAP); + + // Re-mark DEI: 4 bit-fields of 2 bits each, field 0 is bits 0-1, ... + sw_w32((0x1 << 2) | (0x1 << 4), RTL839X_RMK_DEI_CTRL); + + /* Set Congestion avoidance drop probability to 0 for drop precedences 0-2 (bits 24-31) + * low threshold (bits 0-11) to 4095 and high threshold (bits 12-23) to 4095 + * Weighted Random Early Detection (WRED) is used + */ + sw_w32(4095 << 12| 4095, RTL839X_WRED_PORT_THR_CTRL(0)); + sw_w32(4095 << 12| 4095, RTL839X_WRED_PORT_THR_CTRL(1)); + sw_w32(4095 << 12| 4095, RTL839X_WRED_PORT_THR_CTRL(2)); + + /* Set queue-based congestion avoidance properties, register fields are as + * for forward RTL839X_WRED_PORT_THR_CTRL + */ + for (q = 0; q < 8; q++) { + sw_w32(255 << 24 | 78 << 12 | 68, RTL839X_WRED_QUEUE_THR_CTRL(q, 0)); + sw_w32(255 << 24 | 74 << 12 | 64, RTL839X_WRED_QUEUE_THR_CTRL(q, 0)); + sw_w32(255 << 24 | 70 << 12 | 60, RTL839X_WRED_QUEUE_THR_CTRL(q, 0)); + } +} + +void __init rtl83xx_setup_qos(struct rtl838x_switch_priv *priv) +{ + switch_priv = priv; + + pr_info("In %s\n", __func__); + + if (priv->family_id == RTL8380_FAMILY_ID) + return rtl838x_config_qos(); + else if (priv->family_id == RTL8390_FAMILY_ID) + return rtl839x_config_qos(); + + if (priv->family_id == RTL8380_FAMILY_ID) + rtl838x_rate_control_init(priv); + else if (priv->family_id == RTL8390_FAMILY_ID) + rtl839x_rate_control_init(priv); + +} |