diff options
Diffstat (limited to 'target/linux/realtek/dts-5.10')
| -rw-r--r-- | target/linux/realtek/dts-5.10/rtl930x.dtsi | 121 |
1 files changed, 33 insertions, 88 deletions
diff --git a/target/linux/realtek/dts-5.10/rtl930x.dtsi b/target/linux/realtek/dts-5.10/rtl930x.dtsi index a4c9757505..ebacdde68f 100644 --- a/target/linux/realtek/dts-5.10/rtl930x.dtsi +++ b/target/linux/realtek/dts-5.10/rtl930x.dtsi @@ -2,51 +2,6 @@ /dts-v1/; -#define STRINGIZE(s) #s -#define LAN_LABEL(p, s) STRINGIZE(p ## s) -#define SWITCH_PORT_LABEL(n) LAN_LABEL(lan, n) - -#define INTERNAL_PHY(n) \ - phy##n: ethernet-phy@##n { \ - reg = <##n>; \ - compatible = "ethernet-phy-ieee802.3-c22"; \ - phy-is-integrated; \ - }; - -#define EXTERNAL_PHY(n) \ - phy##n: ethernet-phy@##n { \ - reg = <##n>; \ - compatible = "ethernet-phy-ieee802.3-c22"; \ - }; - -#define EXTERNAL_SFP_PHY(n) \ - phy##n: ethernet-phy@##n { \ - compatible = "ethernet-phy-ieee802.3-c22"; \ - sfp; \ - media = "fibre"; \ - reg = <##n>; \ - }; - -#define SWITCH_PORT(n, s, m) \ - port@##n { \ - reg = <##n>; \ - label = SWITCH_PORT_LABEL(s) ; \ - phy-handle = <&phy##n>; \ - phy-mode = #m ; \ - }; - -#define SWITCH_SFP_PORT(n, s, m) \ - port@##n { \ - reg = <##n>; \ - label = SWITCH_PORT_LABEL(s) ; \ - phy-handle = <&phy##n>; \ - phy-mode = #m ; \ - fixed-link { \ - speed = <1000>; \ - full-duplex; \ - }; \ - }; - / { #address-cells = <1>; #size-cells = <1>; @@ -70,7 +25,7 @@ }; chosen { - bootargs = "console=ttyS0,115200"; + bootargs = "console=ttyS0,38400"; }; cpuintc: cpuintc { @@ -92,35 +47,24 @@ #size-cells = <1>; ranges = <0x0 0x18000000 0x10000>; - intc: rtlintc@3000 { - compatible = "realtek,rtl-intc"; - reg = <0x3000 0x20>; - #address-cells = <0>; - #interrupt-cells = <1>; + intc: interrupt-controller@3000 { + compatible = "realtek,rtl9300-intc", "realtek,rtl-intc"; + reg = <0x3000 0x18>, <0x3018 0x18>; interrupt-controller; - interrupt-map = - <31 &cpuintc 1>, /* UART1 */ - <30 &cpuintc 2>, /* UART0 */ - <28 &cpuintc 1>, /* USB_H2 */ - <24 &cpuintc 4>, /* NIC */ - <23 &cpuintc 3>, /* SWCORE */ - <13 &cpuintc 4>, /* GPIO_ABCD */ - <11 &cpuintc 1>, /* TC4 */ - <10 &cpuintc 1>, /* TC3 */ - <9 &cpuintc 1>, /* TC2 */ - <8 &cpuintc 1>, /* TC1 */ - <7 &cpuintc 5>, /* TC0 */ - <6 &cpuintc 5>, /* WDT_IP2 */ - <5 &cpuintc 4>; /* WDT_IP1 */ + #interrupt-cells = <2>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>, <3>, <4>, <5>, <6>, <7>; }; - timer: timer@3200 { - compatible = "realtek,rtl9300-timer"; - reg = <0x3200 0x60>; + rtl9300clock: rtl9300clock@3200 { + compatible = "realtek,rtl9300clock"; + reg = <0xb8003200 0x10>; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&intc>; - interrupts = <8>; - interrupt-names = "ostimer"; - clocks = <&lx_clk>; + interrupts = <7 1>, <8 2>; }; spi0: spi@1200 { @@ -138,7 +82,7 @@ clocks = <&lx_clk>; interrupt-parent = <&intc>; - interrupts = <30>; + interrupts = <30 1>; reg-io-width = <1>; reg-shift = <2>; @@ -153,7 +97,7 @@ clocks = <&lx_clk>; interrupt-parent = <&intc>; - interrupts = <31>; + interrupts = <31 0>; reg-io-width = <1>; reg-shift = <2>; @@ -174,32 +118,32 @@ interrupt-parent = <&intc>; interrupt-names = "phase1", "phase2"; - interrupts = <5>, <6>; + interrupts = <5 4>, <6 4>; }; - gpio0: gpio-controller@3500 { - compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio"; - reg = <0x3500 0x20>; + gpio0: gpio-controller@3300 { + compatible = "realtek,rtl9300-gpio", "realtek,otto-gpio"; + reg = <0x3300 0x1c>, <0x3338 0x8>; + gpio-controller; #gpio-cells = <2>; - ngpios = <32>; - interrupt-parent = <&intc>; - interrupts = <31>; + ngpios = <24>; - /* - * currently, RTL930x GPIO is not supported in - * upstreamed driver (gpio-realtek-otto) - */ - status = "disabled"; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupts = <13 1>; }; + }; ethernet0: ethernet@1b00a300 { compatible = "realtek,rtl838x-eth"; reg = <0x1b00a300 0x100>; + interrupt-parent = <&intc>; - interrupts = <24>; - #interrupt-cells = <1>; + interrupts = <24 3>; + phy-mode = "internal"; fixed-link { @@ -210,8 +154,9 @@ switch0: switch@1b000000 { compatible = "realtek,rtl83xx-switch"; + status = "okay"; interrupt-parent = <&intc>; - interrupts = <20>; + interrupts = <23 2>; }; }; |