1 files changed, 0 insertions, 183 deletions
diff --git a/target/linux/realtek/dts-5.10/rtl8380_tplink_sg2xxx.dtsi b/target/linux/realtek/dts-5.10/rtl8380_tplink_sg2xxx.dtsi
deleted file mode 100644
index e727a9405a..0000000000
--- a/target/linux/realtek/dts-5.10/rtl8380_tplink_sg2xxx.dtsi
+++ /dev/null
@@ -1,183 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "rtl838x.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	aliases {
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-		label-mac-device = &ethernet0;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x10000000>;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio-restart {
-		compatible = "gpio-restart";
-		gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_power: led-0 {
-			label = "green:power";
-			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	i2c1: i2c-gpio-1 {
-		compatible = "i2c-gpio";
-		scl-gpios = <&gpio0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		sda-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		tps23861_20: tps23861@20 {
-			compatible = "ti,tps23861";
-			reg = <0x20>;
-			shunt-resistor-micro-ohms = <255000>;
-		};
-
-		tps23861_28: tps23861@28 {
-			compatible = "ti,tps23861";
-			reg = <0x28>;
-			shunt-resistor-micro-ohms = <255000>;
-		};
-	};
-
-	watchdog {
-		compatible = "linux,wdt-gpio";
-		gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-		hw_algo = "toggle";
-		/* SGM706 specs: typical 1.6s, but minimum 1.0s. */
-		hw_margin_ms = <1000>;
-	};
-};
-
-&gpio0 {
-	watchdog-enable {
-		gpio-hog;
-		gpios = <14 GPIO_ACTIVE_LOW>;
-		output-low;
-		line-name = "watchdog-enable";
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0xe0000>;
-				read-only;
-			};
-			partition@e0000 {
-				label = "u-boot-env";
-				reg = <0xe0000 0x20000>;
-			};
-			partition@100000 {
-				compatible = "denx,uimage";
-				label = "firmware";
-				reg = <0x100000 0x1a00000>;
-			};
-			partition@1b00000 {
-				label = "usrappfs";
-				reg = <0x1b00000 0x400000>;
-			};
-			partition@1f00000 {
-				compatible = "nvmem-cells";
-				label = "para";
-				reg = <0x1f00000 0x100000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				read-only;
-
-				factory_macaddr: macaddr@fdff4 {
-					reg = <0xfdff4 0x6>;
-				};
-			};
-		};
-	};
-};
-
-&ethernet0 {
-	nvmem-cells = <&factory_macaddr>;
-	nvmem-cell-names = "mac-address";
-
-	mdio: mdio-bus {
-		compatible = "realtek,rtl838x-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		INTERNAL_PHY(8)
-		INTERNAL_PHY(9)
-		INTERNAL_PHY(10)
-		INTERNAL_PHY(11)
-		INTERNAL_PHY(12)
-		INTERNAL_PHY(13)
-		INTERNAL_PHY(14)
-		INTERNAL_PHY(15)
-
-		INTERNAL_PHY(24)
-		INTERNAL_PHY(26)
-	};
-};
-
-&switch0 {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		SWITCH_PORT(15, 1, internal)
-		SWITCH_PORT(14, 2, internal)
-		SWITCH_PORT(13, 3, internal)
-		SWITCH_PORT(12, 4, internal)
-		SWITCH_PORT(11, 5, internal)
-		SWITCH_PORT(10, 6, internal)
-		SWITCH_PORT(9, 7, internal)
-		SWITCH_PORT(8, 8, internal)
-
-		SWITCH_SFP_PORT(24, 9, 1000base-x)
-		SWITCH_SFP_PORT(26, 10, 1000base-x)
-
-		port@28 {
-			ethernet = <&ethernet0>;
-			reg = <28>;
-			phy-mode = "internal";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};