diff options
Diffstat (limited to 'target/linux/ramips')
6 files changed, 203 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/mt7621_zyxel_nr7101.dts b/target/linux/ramips/dts/mt7621_zyxel_nr7101.dts new file mode 100644 index 0000000000..f6a42286f1 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_zyxel_nr7101.dts @@ -0,0 +1,164 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "zyxel,nr7101", "mediatek,mt7621-soc"; + model = "ZyXEL NR7101"; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + label-mac-device = &gmac0; + }; + + leds { + compatible = "gpio-leds"; + + led@13 { + label = "yellow:system"; + gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; + }; + + power: led@14 { + label = "green:system"; + gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + }; + + led@15 { + label = "red:system"; + gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + + wps { + label = "wlan"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WLAN>; + }; + + reset { + label = "reset"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; +}; + +&gpio { + lte_pwrkey { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "lte-pwrkey"; + }; + + lte_power { + gpio-hog; + gpios = <18 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "lte-power"; + }; +}; + +&nand { + status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Bootloader"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "Config"; + reg = <0x80000 0x80000>; + }; + + factory: partition@100000 { + label = "Factory"; + reg = <0x100000 0x40000>; + read-only; + }; + + partition@140000 { + label = "Kernel"; + reg = <0x140000 0x1ec0000>; + }; + + partition@540000 { + label = "ubi"; + reg = <0x540000 0x1ac0000>; + }; + + partition@2140000 { + label = "Kernel2"; + reg = <0x2140000 0x1ec0000>; + }; + + partition@4000000 { + label = "wwan"; + reg = <0x4000000 0x100000>; + }; + + partition@4100000 { + label = "data"; + reg = <0x4100000 0x1000000>; + }; + + partition@5100000 { + label = "rom-d"; + reg = <0x5100000 0x100000>; + read-only; + }; + + partition@5200000 { + label = "reserve"; + reg = <0x5200000 0x80000>; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0>; + }; +}; + +&gmac0 { + mtd-mac-address = <&factory 0xe000>; +}; + +&switch0 { + ports { + port@2 { + status = "okay"; + label = "lan"; + }; + }; +}; + +&state_default { + gpio { + groups = "i2c", "rgmii2", "uart3", "jtag", "wdt"; + function = "gpio"; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 45a58dace9..2c7aa80505 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -79,6 +79,13 @@ define Build/ubnt-erx-factory-image fi endef +define Build/zytrx-header + $(eval board=$(word 1,$(1))) + $(eval version=$(word 2,$(1))) + $(STAGING_DIR_HOST)/bin/zytrx -B '$(board)' -v '$(version)' -i $@ -o $@.new + mv $@.new $@ +endef + define Device/dsa-migration DEVICE_COMPAT_VERSION := 1.1 DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA @@ -1504,6 +1511,21 @@ define Device/zio_freezio endef TARGET_DEVICES += zio_freezio +define Device/zyxel_nr7101 + $(Device/dsa-migration) + BLOCKSIZE := 128k + PAGESIZE := 2048 + UBINIZE_OPTS := -E 5 + DEVICE_VENDOR := ZyXEL + DEVICE_MODEL := NR7101 + DEVICE_PACKAGES := kmod-mt7603 kmod-usb3 uboot-envtools kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi + KERNEL := $(KERNEL_DTB) | uImage lzma | zytrx-header $$(DEVICE_MODEL) $$(VERSION_DIST)-$$(REVISION) + KERNEL_INITRAMFS := $(KERNEL_DTB) | uImage lzma | zytrx-header $$(DEVICE_MODEL) 9.99(ABUV.9)$$(VERSION_DIST)-recovery + KERNEL_INITRAMFS_SUFFIX := -recovery.bin + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata +endef +TARGET_DEVICES += zyxel_nr7101 + define Device/zyxel_wap6805 $(Device/dsa-migration) BLOCKSIZE := 128k diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index 934276a042..cde3cba9bc 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -63,6 +63,9 @@ ramips_setup_interfaces() ubnt,edgerouter-x-sfp) ucidef_set_interfaces_lan_wan "eth1 eth2 eth3 eth4 eth5" "eth0" ;; + zyxel,nr7101) + ucidef_set_interfaces_lan_wan "lan" "wan" + ;; zyxel,wap6805) ucidef_set_interface_lan "lan1 lan2 lan3 lan4" ucidef_set_interface "qtn" ifname "eth1" protocol "static" ipaddr "1.1.1.1" netmask "255.255.255.0" diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches b/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches index 8a96e93226..ed728b07c4 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches @@ -22,6 +22,9 @@ ubnt,edgerouter-x-sfp) ucidef_add_gpio_switch "poe_power_port3" "PoE Power Port3" "403" ucidef_add_gpio_switch "poe_power_port4" "PoE Power Port4" "404" ;; +zyxel,nr7101) + ucidef_add_gpio_switch "lte_reset" "Reset LTE/5G modem" "483" + ;; zyxel,wap6805) ucidef_add_gpio_switch "qtn_power" "Quantenna Module Power" "496" "1" ;; diff --git a/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount b/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount index 7ef0053e67..a155458d3f 100755 --- a/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount +++ b/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount @@ -16,5 +16,10 @@ boot() { samknows,whitebox-v8) fw_setenv bootcount 0 ;; + zyxel,nr7101) + [ $(printf %d $(fw_printenv -n DebugFlag)) -gt 0 ] || fw_setenv DebugFlag 0x1 + [ $(printf %d $(fw_printenv -n Image1Stable)) -gt 0 ] || fw_setenv Image1Stable 1 + [ $(printf %d $(fw_printenv -n Image1Try)) -gt 0 ] && fw_setenv Image1Try 0 + ;; esac } diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh index c9152c5cf4..d30bc3db2e 100755 --- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh @@ -82,6 +82,12 @@ platform_do_upgrade() { ubnt,edgerouter-x-sfp) platform_upgrade_ubnt_erx "$1" ;; + zyxel,nr7101) + fw_setenv CheckBypass 0 + fw_setenv Image1Stable 0 + CI_KERNPART="Kernel" + nand_do_upgrade "$1" + ;; zyxel,wap6805) local kernel2_mtd="$(find_mtd_part Kernel2)" [ "$(hexdump -n 4 -e '"%x"' $kernel2_mtd)" = "56190527" ] &&\ |