diff options
Diffstat (limited to 'target/linux/ramips')
| -rw-r--r-- | target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch | 5707 |
1 files changed, 5707 insertions, 0 deletions
diff --git a/target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch b/target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch new file mode 100644 index 0000000000..f13691ad1b --- /dev/null +++ b/target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch @@ -0,0 +1,5707 @@ +--- a/drivers/usb/core/hcd-pci.c ++++ b/drivers/usb/core/hcd-pci.c +@@ -214,8 +214,13 @@ + goto disable_pci; + } + ++ ++#ifdef CONFIG_USB_MT7621_XHCI_PLATFORM ++ hcd->amd_resume_bug = 0; ++#else + hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) && + driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0; ++#endif + + if (driver->flags & HCD_MEMORY) { + /* EHCI, OHCI */ +--- a/drivers/usb/core/hub.c ++++ b/drivers/usb/core/hub.c +@@ -1286,7 +1286,7 @@ + if (type != HUB_SUSPEND) { + /* Disconnect all the children */ + for (i = 0; i < hdev->maxchild; ++i) { +- if (hub->ports[i]->child) ++ if (hub->ports[i] && hub->ports[i]->child) + usb_disconnect(&hub->ports[i]->child); + } + } +--- a/drivers/usb/core/port.c ++++ b/drivers/usb/core/port.c +@@ -480,8 +480,10 @@ + struct usb_port *port_dev = hub->ports[port1 - 1]; + struct usb_port *peer; + +- peer = port_dev->peer; +- if (peer) +- unlink_peers(port_dev, peer); +- device_unregister(&port_dev->dev); ++ if(port_dev) { ++ peer = port_dev->peer; ++ if (peer) ++ unlink_peers(port_dev, peer); ++ device_unregister(&port_dev->dev); ++ } + } +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -32,7 +32,13 @@ + default y + + config USB_XHCI_PLATFORM +- tristate ++ tristate "xHCI platform" ++ ++config USB_MT7621_XHCI_PLATFORM ++ bool "MTK MT7621 xHCI" ++ depends on USB_XHCI_PLATFORM ++ depends on SOC_MT7621 ++ select USB_PHY + + config USB_XHCI_MVEBU + tristate "xHCI support for Marvell Armada 375/38x" +@@ -589,7 +595,7 @@ + + config USB_UHCI_HCD + tristate "UHCI HCD (most Intel and VIA) support" +- depends on PCI || USB_UHCI_SUPPORT_NON_PCI_HC ++ depends on BROKEN && (PCI || USB_UHCI_SUPPORT_NON_PCI_HC) + ---help--- + The Universal Host Controller Interface is a standard by Intel for + accessing the USB hardware in the PC (which is also called the USB +--- a/drivers/usb/host/Makefile ++++ b/drivers/usb/host/Makefile +@@ -16,7 +16,12 @@ + xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o + xhci-hcd-y += xhci-trace.o + ++ifdef CONFIG_USB_MT7621_XHCI_PLATFORM ++xhci-hcd-y += mtk-phy.o xhci-mtk-scheduler.o xhci-mtk-power.o xhci-mtk.o mtk-phy-7621.o mtk-phy-ahb.o ++endif ++ + xhci-plat-hcd-y := xhci-plat.o ++ + ifneq ($(CONFIG_USB_XHCI_MVEBU), ) + xhci-plat-hcd-y += xhci-mvebu.o + endif +@@ -26,9 +31,14 @@ + + obj-$(CONFIG_USB_WHCI_HCD) += whci/ + ++ifndef CONFIG_USB_MT7621_XHCI_PLATFORM + obj-$(CONFIG_PCI) += pci-quirks.o ++endif + ++ifndef CONFIG_USB_MT7621_XHCI_PLATFORM + obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o ++endif ++ + obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o + + obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o +--- /dev/null ++++ b/drivers/usb/host/mtk-phy-7621.c +@@ -0,0 +1,445 @@ ++#include "mtk-phy.h" ++ ++#ifdef CONFIG_PROJECT_7621 ++#include "mtk-phy-7621.h" ++ ++//not used on SoC ++PHY_INT32 phy_init(struct u3phy_info *info){ ++ return PHY_TRUE; ++} ++ ++//not used on SoC ++PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase){ ++ return PHY_TRUE; ++} ++ ++//-------------------------------------------------------- ++// Function : fgEyeScanHelper_CheckPtInRegion() ++// Description : Check if the test point is in a rectangle region. ++// If it is in the rectangle, also check if this point ++// is on the multiple of deltaX and deltaY. ++// Parameter : strucScanRegion * prEye - the region ++// BYTE bX ++// BYTE bY ++// Return : BYTE - TRUE : This point needs to be tested ++// FALSE: This point will be omitted ++// Note : First check within the rectangle. ++// Secondly, use modulous to check if the point will be tested. ++//-------------------------------------------------------- ++static PHY_INT8 fgEyeScanHelper_CheckPtInRegion(struct strucScanRegion * prEye, PHY_INT8 bX, PHY_INT8 bY) ++{ ++ PHY_INT8 fgValid = true; ++ ++ ++ /// Be careful, the axis origin is on the TOP-LEFT corner. ++ /// Therefore the top-left point has the minimum X and Y ++ /// Botton-right point is the maximum X and Y ++ if ( (prEye->bX_tl <= bX) && (bX <= prEye->bX_br) ++ && (prEye->bY_tl <= bY) && (bY <= prEye->bX_br)) ++ { ++ // With the region, now check whether or not the input test point is ++ // on the multiples of X and Y ++ // Do not have to worry about negative value, because we have already ++ // check the input bX, and bY is within the region. ++ if ( ((bX - prEye->bX_tl) % (prEye->bDeltaX)) ++ || ((bY - prEye->bY_tl) % (prEye->bDeltaY)) ) ++ { ++ // if the division will have remainder, that means ++ // the input test point is on the multiples of X and Y ++ fgValid = false; ++ } ++ else ++ { ++ } ++ } ++ else ++ { ++ ++ fgValid = false; ++ } ++ return fgValid; ++} ++ ++//-------------------------------------------------------- ++// Function : EyeScanHelper_RunTest() ++// Description : Enable the test, and wait til it is completed ++// Parameter : None ++// Return : None ++// Note : None ++//-------------------------------------------------------- ++static void EyeScanHelper_RunTest(struct u3phy_info *info) ++{ ++ DRV_UDELAY(100); ++ // Disable the test ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 0); //RG_SSUSB_RX_EYE_CNT_EN = 0 ++ DRV_UDELAY(100); ++ // Run the test ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 1); //RG_SSUSB_RX_EYE_CNT_EN = 1 ++ DRV_UDELAY(100); ++ // Wait til it's done ++ //RGS_SSUSB_RX_EYE_CNT_RDY ++ while(!U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5) ++ , RGS_SSUSB_EQ_EYE_CNT_RDY_OFST, RGS_SSUSB_EQ_EYE_CNT_RDY)); ++} ++ ++//-------------------------------------------------------- ++// Function : fgEyeScanHelper_CalNextPoint() ++// Description : Calcualte the test point for the measurement ++// Parameter : None ++// Return : BOOL - TRUE : the next point is within the ++// boundaryof HW limit ++// FALSE: the next point is out of the HW limit ++// Note : The next point is obtained by calculating ++// from the bottom left of the region rectangle ++// and then scanning up until it reaches the upper ++// limit. At this time, the x will increment, and ++// start scanning downwards until the y hits the ++// zero. ++//-------------------------------------------------------- ++static PHY_INT8 fgEyeScanHelper_CalNextPoint(void) ++{ ++ if ( ((_bYcurr == MAX_Y) && (_eScanDir == SCAN_DN)) ++ || ((_bYcurr == MIN_Y) && (_eScanDir == SCAN_UP)) ++ ) ++ { ++ /// Reaches the limit of Y axis ++ /// Increment X ++ _bXcurr++; ++ _fgXChged = true; ++ _eScanDir = (_eScanDir == SCAN_UP) ? SCAN_DN : SCAN_UP; ++ ++ if (_bXcurr > MAX_X) ++ { ++ return false; ++ } ++ } ++ else ++ { ++ _bYcurr = (_eScanDir == SCAN_DN) ? _bYcurr + 1 : _bYcurr - 1; ++ _fgXChged = false; ++ } ++ return PHY_TRUE; ++} ++ ++PHY_INT32 eyescan_init(struct u3phy_info *info){ ++ //initial PHY setting ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phya_regs->rega) ++ , RG_SSUSB_CDR_EPEN_OFST, RG_SSUSB_CDR_EPEN, 1); ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->phyd_mix3) ++ , RG_SSUSB_FORCE_CDR_PI_PWD_OFST, RG_SSUSB_FORCE_CDR_PI_PWD, 1); ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) ++ , RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1 ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) ++ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1 ++ return PHY_TRUE; ++} ++ ++PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y ++ , PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt){ ++ PHY_INT32 cOfst = 0; ++ PHY_UINT8 bIdxX = 0; ++ PHY_UINT8 bIdxY = 0; ++ //PHY_INT8 bCnt = 0; ++ PHY_UINT8 bIdxCycCnt = 0; ++ PHY_INT8 fgValid; ++ PHY_INT8 cX; ++ PHY_INT8 cY; ++ PHY_UINT8 bExtendCnt; ++ PHY_INT8 isContinue; ++ //PHY_INT8 isBreak; ++ PHY_UINT32 wErr0 = 0, wErr1 = 0; ++ //PHY_UINT32 temp; ++ ++ PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX]; ++ PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX]; ++ ++ _rEye1.bX_tl = x_t1; ++ _rEye1.bY_tl = y_t1; ++ _rEye1.bX_br = x_br; ++ _rEye1.bY_br = y_br; ++ _rEye1.bDeltaX = delta_x; ++ _rEye1.bDeltaY = delta_y; ++ ++ _rEye2.bX_tl = x_t1; ++ _rEye2.bY_tl = y_t1; ++ _rEye2.bX_br = x_br; ++ _rEye2.bY_br = y_br; ++ _rEye2.bDeltaX = delta_x; ++ _rEye2.bDeltaY = delta_y; ++ ++ _rTestCycle.wEyeCnt = eye_cnt; ++ _rTestCycle.bNumOfEyeCnt = num_cnt; ++ _rTestCycle.bNumOfIgnoreCnt = num_ignore_cnt; ++ _rTestCycle.bPICalEn = PI_cal_en; ++ ++ _bXcurr = 0; ++ _bYcurr = 0; ++ _eScanDir = SCAN_DN; ++ _fgXChged = false; ++ ++ printk("x_t1: %x, y_t1: %x, x_br: %x, y_br: %x, delta_x: %x, delta_y: %x, \ ++ eye_cnt: %x, num_cnt: %x, PI_cal_en: %x, num_ignore_cnt: %x\n", \ ++ x_t1, y_t1, x_br, y_br, delta_x, delta_y, eye_cnt, num_cnt, PI_cal_en, num_ignore_cnt); ++ ++ //force SIGDET to OFF ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) ++ , RG_SSUSB_RX_SIGDET_EN_SEL_OFST, RG_SSUSB_RX_SIGDET_EN_SEL, 1); //RG_SSUSB_RX_SIGDET_SEL = 1 ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) ++ , RG_SSUSB_RX_SIGDET_EN_OFST, RG_SSUSB_RX_SIGDET_EN, 0); //RG_SSUSB_RX_SIGDET_EN = 0 ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1) ++ , RG_SSUSB_EQ_SIGDET_OFST, RG_SSUSB_EQ_SIGDET, 0); //RG_SSUSB_RX_SIGDET = 0 ++ ++ // RX_TRI_DET_EN to Disable ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq3) ++ , RG_SSUSB_EQ_TRI_DET_EN_OFST, RG_SSUSB_EQ_TRI_DET_EN, 0); //RG_SSUSB_RX_TRI_DET_EN = 0 ++ ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1); //RG_SSUSB_EYE_MON_EN = 1 ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, 0); //RG_SSUSB_RX_EYE_XOFFSET = 0 ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, 0); //RG_SSUSB_RX_EYE0_Y = 0 ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, 0); //RG_SSUSB_RX_EYE1_Y = 0 ++ ++ ++ if (PI_cal_en){ ++ // PI Calibration ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) ++ , RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1 ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) ++ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0 ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) ++ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1 ++ ++ DRV_UDELAY(20); ++ ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) ++ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0 ++ _bPIResult = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5) ++ , RGS_SSUSB_EQ_PILPO_OFST, RGS_SSUSB_EQ_PILPO); //read RGS_SSUSB_RX_PILPO ++ ++ printk(KERN_ERR "PI result: %d\n", _bPIResult); ++ } ++ // Read Initial DAC ++ // Set CYCLE ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye3) ++ ,RG_SSUSB_EQ_EYE_CNT_OFST, RG_SSUSB_EQ_EYE_CNT, eye_cnt); //RG_SSUSB_RX_EYE_CNT ++ ++ // Eye Monitor Feature ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1) ++ , RG_SSUSB_EQ_EYE_MASK_OFST, RG_SSUSB_EQ_EYE_MASK, 0x3ff); //RG_SSUSB_RX_EYE_MASK = 0x3ff ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1); //RG_SSUSB_EYE_MON_EN = 1 ++ ++ // Move X,Y to the top-left corner ++ for (cOfst = 0; cOfst >= -64; cOfst--) ++ { ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ ,RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst); //RG_SSUSB_RX_EYE_XOFFSET ++ } ++ for (cOfst = 0; cOfst < 64; cOfst++) ++ { ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst); //RG_SSUSB_RX_EYE0_Y ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst); //RG_SSUSB_RX_EYE1_Y ++ } ++ //ClearErrorResult ++ for(bIdxCycCnt = 0; bIdxCycCnt < CYCLE_COUNT_MAX; bIdxCycCnt++){ ++ for(bIdxX = 0; bIdxX < ERRCNT_MAX; bIdxX++) ++ { ++ for(bIdxY = 0; bIdxY < ERRCNT_MAX; bIdxY++){ ++ pwErrCnt0[bIdxCycCnt][bIdxX][bIdxY] = 0; ++ pwErrCnt1[bIdxCycCnt][bIdxX][bIdxY] = 0; ++ } ++ } ++ } ++ isContinue = true; ++ while(isContinue){ ++ //printk(KERN_ERR "_bXcurr: %d, _bYcurr: %d\n", _bXcurr, _bYcurr); ++ // The point is within the boundary, then let's check if it is within ++ // the testing region. ++ // The point is only test-able if one of the eye region ++ // includes this point. ++ fgValid = fgEyeScanHelper_CheckPtInRegion(&_rEye1, _bXcurr, _bYcurr) ++ || fgEyeScanHelper_CheckPtInRegion(&_rEye2, _bXcurr, _bYcurr); ++ // Translate bX and bY to 2's complement from where the origin was on the ++ // top left corner. ++ // 0x40 and 0x3F needs a bit of thinking!!!! >"< ++ cX = (_bXcurr ^ 0x40); ++ cY = (_bYcurr ^ 0x3F); ++ ++ // Set X if necessary ++ if (_fgXChged == true) ++ { ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cX); //RG_SSUSB_RX_EYE_XOFFSET ++ } ++ // Set Y ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cY); //RG_SSUSB_RX_EYE0_Y ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cY); //RG_SSUSB_RX_EYE1_Y ++ ++ /// Test this point! ++ if (fgValid){ ++ for (bExtendCnt = 0; bExtendCnt < num_ignore_cnt; bExtendCnt++) ++ { ++ //run test ++ EyeScanHelper_RunTest(info); ++ } ++ for (bExtendCnt = 0; bExtendCnt < num_cnt; bExtendCnt++) ++ { ++ EyeScanHelper_RunTest(info); ++ wErr0 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon3) ++ , RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0); ++ wErr1 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon4) ++ , RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1); ++ ++ pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr] = wErr0; ++ pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr] = wErr1; ++ ++ //EyeScanHelper_GetResult(&_rRes.pwErrCnt0[bCnt], &_rRes.pwErrCnt1[bCnt]); ++// printk(KERN_ERR "cnt[%d] cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n" ++// , bExtendCnt, _bXcurr, _bYcurr, cX, cY, pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr], pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr]); ++ } ++ //printk(KERN_ERR "cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n", _bXcurr, _bYcurr, cX, cY, pwErrCnt0[0][_bXcurr][_bYcurr], pwErrCnt1[0][_bXcurr][_bYcurr]); ++ } ++ else{ ++ ++ } ++ if (fgEyeScanHelper_CalNextPoint() == false){ ++#if 0 ++ printk(KERN_ERR "Xcurr [0x%x] Ycurr [0x%x]\n", _bXcurr, _bYcurr); ++ printk(KERN_ERR "XcurrREG [0x%x] YcurrREG [0x%x]\n", cX, cY); ++#endif ++ printk(KERN_ERR "end of eye scan\n"); ++ isContinue = false; ++ } ++ } ++ printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n" ++ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET) ++ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y)); ++ ++ // Move X,Y to the top-left corner ++ for (cOfst = 63; cOfst >= 0; cOfst--) ++ { ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst); //RG_SSUSB_RX_EYE_XOFFSET ++ } ++ for (cOfst = 63; cOfst >= 0; cOfst--) ++ { ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst); ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst); ++ ++ } ++ printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n" ++ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET) ++ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y)); ++ ++ printk(KERN_ERR "PI result: %d\n", _bPIResult); ++ printk(KERN_ERR "pwErrCnt0 addr: 0x%x\n", (PHY_UINT32)pwErrCnt0); ++ printk(KERN_ERR "pwErrCnt1 addr: 0x%x\n", (PHY_UINT32)pwErrCnt1); ++ ++ return PHY_TRUE; ++} ++ ++//not used on SoC ++PHY_INT32 u2_save_cur_en(struct u3phy_info *info){ ++ return PHY_TRUE; ++} ++ ++//not used on SoC ++PHY_INT32 u2_save_cur_re(struct u3phy_info *info){ ++ return PHY_TRUE; ++} ++ ++PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info){ ++ PHY_INT32 i=0; ++ //PHY_INT32 j=0; ++ //PHY_INT8 u1SrCalVal = 0; ++ //PHY_INT8 u1Reg_addr_HSTX_SRCAL_EN; ++ PHY_INT32 fgRet = 0; ++ PHY_INT32 u4FmOut = 0; ++ PHY_INT32 u4Tmp = 0; ++ //PHY_INT32 temp; ++ ++ // => RG_USB20_HSTX_SRCAL_EN = 1 ++ // enable HS TX SR calibration ++ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0) ++ , RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0x1); ++ DRV_MSLEEP(1); ++ ++ // => RG_FRCK_EN = 1 ++ // Enable free run clock ++ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1) ++ , RG_FRCK_EN_OFST, RG_FRCK_EN, 1); ++ ++ // MT6290 HS signal quality patch ++ // => RG_CYCLECNT = 400 ++ // Setting cyclecnt =400 ++ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0) ++ , RG_CYCLECNT_OFST, RG_CYCLECNT, 0x400); ++ ++ // => RG_FREQDET_EN = 1 ++ // Enable frequency meter ++ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0) ++ , RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0x1); ++ ++ // wait for FM detection done, set 10ms timeout ++ for(i=0; i<10; i++){ ++ // => u4FmOut = USB_FM_OUT ++ // read FM_OUT ++ u4FmOut = U3PhyReadReg32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr0)); ++ printk("FM_OUT value: u4FmOut = %d(0x%08X)\n", u4FmOut, u4FmOut); ++ ++ // check if FM detection done ++ if (u4FmOut != 0) ++ { ++ fgRet = 0; ++ printk("FM detection done! loop = %d\n", i); ++ ++ break; ++ } ++ ++ fgRet = 1; ++ DRV_MSLEEP(1); ++ } ++ // => RG_FREQDET_EN = 0 ++ // disable frequency meter ++ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0) ++ , RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0); ++ ++ // => RG_FRCK_EN = 0 ++ // disable free run clock ++ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1) ++ , RG_FRCK_EN_OFST, RG_FRCK_EN, 0); ++ ++ // => RG_USB20_HSTX_SRCAL_EN = 0 ++ // disable HS TX SR calibration ++ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0) ++ , RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0); ++ DRV_MSLEEP(1); ++ ++ if(u4FmOut == 0){ ++ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0) ++ , RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, 0x4); ++ ++ fgRet = 1; ++ } ++ else{ ++ // set reg = (1024/FM_OUT) * 25 * 0.028 (round to the nearest digits) ++ u4Tmp = (((1024 * 25 * U2_SR_COEF_7621) / u4FmOut) + 500) / 1000; ++ printk("SR calibration value u1SrCalVal = %d\n", (PHY_UINT8)u4Tmp); ++ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0) ++ , RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, u4Tmp); ++ } ++ return fgRet; ++} ++ ++#endif +--- /dev/null ++++ b/drivers/usb/host/mtk-phy-7621.h +@@ -0,0 +1,2871 @@ ++#ifdef CONFIG_PROJECT_7621 ++#ifndef __MTK_PHY_7621_H ++#define __MTK_PHY_7621_H ++ ++#define U2_SR_COEF_7621 28 ++ ++/////////////////////////////////////////////////////////////////////////////// ++ ++struct u2phy_reg { ++ //0x0 ++ PHY_LE32 u2phyac0; ++ PHY_LE32 u2phyac1; ++ PHY_LE32 u2phyac2; ++ PHY_LE32 reserve0; ++ //0x10 ++ PHY_LE32 u2phyacr0; ++ PHY_LE32 u2phyacr1; ++ PHY_LE32 u2phyacr2; ++ PHY_LE32 u2phyacr3; ++ //0x20 ++ PHY_LE32 u2phyacr4; ++ PHY_LE32 u2phyamon0; ++ PHY_LE32 reserve1[2]; ++ //0x30~0x50 ++ PHY_LE32 reserve2[12]; ++ //0x60 ++ PHY_LE32 u2phydcr0; ++ PHY_LE32 u2phydcr1; ++ PHY_LE32 u2phydtm0; ++ PHY_LE32 u2phydtm1; ++ //0x70 ++ PHY_LE32 u2phydmon0; ++ PHY_LE32 u2phydmon1; ++ PHY_LE32 u2phydmon2; ++ PHY_LE32 u2phydmon3; ++ //0x80 ++ PHY_LE32 u2phybc12c; ++ PHY_LE32 u2phybc12c1; ++ PHY_LE32 reserve3[2]; ++ //0x90~0xe0 ++ PHY_LE32 reserve4[24]; ++ //0xf0 ++ PHY_LE32 reserve6[3]; ++ PHY_LE32 regfcom; ++}; ++ ++//U3D_U2PHYAC0 ++#define RG_USB20_USBPLL_DIVEN (0x7<<28) //30:28 ++#define RG_USB20_USBPLL_CKCTRL (0x3<<26) //27:26 ++#define RG_USB20_USBPLL_PREDIV (0x3<<24) //25:24 ++#define RG_USB20_USBPLL_FORCE_ON (0x1<<23) //23:23 ++#define RG_USB20_USBPLL_FBDIV (0x7f<<16) //22:16 ++#define RG_USB20_REF_EN (0x1<<15) //15:15 ++#define RG_USB20_INTR_EN (0x1<<14) //14:14 ++#define RG_USB20_BG_TRIM (0xf<<8) //11:8 ++#define RG_USB20_BG_RBSEL (0x3<<6) //7:6 ++#define RG_USB20_BG_RASEL (0x3<<4) //5:4 ++#define RG_USB20_BGR_DIV (0x3<<2) //3:2 ++#define RG_SIFSLV_CHP_EN (0x1<<1) //1:1 ++#define RG_SIFSLV_BGR_EN (0x1<<0) //0:0 ++ ++//U3D_U2PHYAC1 ++#define RG_USB20_VRT_VREF_SEL (0x7<<28) //30:28 ++#define RG_USB20_TERM_VREF_SEL (0x7<<24) //26:24 ++#define RG_USB20_MPX_SEL (0xff<<16) //23:16 ++#define RG_USB20_MPX_OUT_SEL (0x3<<12) //13:12 ++#define RG_USB20_TX_PH_ROT_SEL (0x7<<8) //10:8 ++#define RG_USB20_USBPLL_ACCEN (0x1<<3) //3:3 ++#define RG_USB20_USBPLL_LF (0x1<<2) //2:2 ++#define RG_USB20_USBPLL_BR (0x1<<1) //1:1 ++#define RG_USB20_USBPLL_BP (0x1<<0) //0:0 ++ ++//U3D_U2PHYAC2 ++#define RG_SIFSLV_MAC_BANDGAP_EN (0x1<<17) //17:17 ++#define RG_SIFSLV_MAC_CHOPPER_EN (0x1<<16) //16:16 ++#define RG_USB20_CLKREF_REV (0xff<<0) //7:0 ++ ++//U3D_U2PHYACR0 ++#define RG_USB20_ICUSB_EN (0x1<<24) //24:24 ++#define RG_USB20_HSTX_SRCAL_EN (0x1<<23) //23:23 ++#define RG_USB20_HSTX_SRCTRL (0x7<<16) //18:16 ++#define RG_USB20_LS_CR (0x7<<12) //14:12 ++#define RG_USB20_FS_CR (0x7<<8) //10:8 ++#define RG_USB20_LS_SR (0x7<<4) //6:4 ++#define RG_USB20_FS_SR (0x7<<0) //2:0 ++ ++//U3D_U2PHYACR1 ++#define RG_USB20_INIT_SQ_EN_DG (0x3<<28) //29:28 ++#define RG_USB20_SQD (0x3<<24) //25:24 ++#define RG_USB20_HSTX_TMODE_SEL (0x3<<20) //21:20 ++#define RG_USB20_HSTX_TMODE_EN (0x1<<19) //19:19 ++#define RG_USB20_PHYD_MONEN (0x1<<18) //18:18 ++#define RG_USB20_INLPBK_EN (0x1<<17) //17:17 ++#define RG_USB20_CHIRP_EN (0x1<<16) //16:16 ++#define RG_USB20_DM_ABIST_SOURCE_EN (0x1<<15) //15:15 ++#define RG_USB20_DM_ABIST_SELE (0xf<<8) //11:8 ++#define RG_USB20_DP_ABIST_SOURCE_EN (0x1<<7) //7:7 ++#define RG_USB20_DP_ABIST_SELE (0xf<<0) //3:0 ++ ++//U3D_U2PHYACR2 ++#define RG_USB20_OTG_ABIST_SELE (0x7<<29) //31:29 ++#define RG_USB20_OTG_ABIST_EN (0x1<<28) //28:28 ++#define RG_USB20_OTG_VBUSCMP_EN (0x1<<27) //27:27 ++#define RG_USB20_OTG_VBUSTH (0x7<<24) //26:24 ++#define RG_USB20_DISC_FIT_EN (0x1<<22) //22:22 ++#define RG_USB20_DISCD (0x3<<20) //21:20 ++#define RG_USB20_DISCTH (0xf<<16) //19:16 ++#define RG_USB20_SQCAL_EN (0x1<<15) //15:15 ++#define RG_USB20_SQCAL (0xf<<8) //11:8 ++#define RG_USB20_SQTH (0xf<<0) //3:0 ++ ++//U3D_U2PHYACR3 ++#define RG_USB20_HSTX_DBIST (0xf<<28) //31:28 ++#define RG_USB20_HSTX_BIST_EN (0x1<<26) //26:26 ++#define RG_USB20_HSTX_I_EN_MODE (0x3<<24) //25:24 ++#define RG_USB20_HSRX_TMODE_EN (0x1<<23) //23:23 ++#define RG_USB20_HSRX_BIAS_EN_SEL (0x3<<20) //21:20 ++#define RG_USB20_USB11_TMODE_EN (0x1<<19) //19:19 ++#define RG_USB20_TMODE_FS_LS_TX_EN (0x1<<18) //18:18 ++#define RG_USB20_TMODE_FS_LS_RCV_EN (0x1<<17) //17:17 ++#define RG_USB20_TMODE_FS_LS_MODE (0x1<<16) //16:16 ++#define RG_USB20_HS_TERM_EN_MODE (0x3<<13) //14:13 ++#define RG_USB20_PUPD_BIST_EN (0x1<<12) //12:12 ++#define RG_USB20_EN_PU_DM (0x1<<11) //11:11 ++#define RG_USB20_EN_PD_DM (0x1<<10) //10:10 ++#define RG_USB20_EN_PU_DP (0x1<<9) //9:9 ++#define RG_USB20_EN_PD_DP (0x1<<8) //8:8 ++#define RG_USB20_PHY_REV (0xff<<0) //7:0 ++ ++//U3D_U2PHYACR4 ++#define RG_USB20_DP_100K_MODE (0x1<<18) //18:18 ++#define RG_USB20_DM_100K_EN (0x1<<17) //17:17 ++#define USB20_DP_100K_EN (0x1<<16) //16:16 ++#define USB20_GPIO_DM_I (0x1<<15) //15:15 ++#define USB20_GPIO_DP_I (0x1<<14) //14:14 ++#define USB20_GPIO_DM_OE (0x1<<13) //13:13 ++#define USB20_GPIO_DP_OE (0x1<<12) //12:12 ++#define RG_USB20_GPIO_CTL (0x1<<9) //9:9 ++#define USB20_GPIO_MODE (0x1<<8) //8:8 ++#define RG_USB20_TX_BIAS_EN (0x1<<5) //5:5 ++#define RG_USB20_TX_VCMPDN_EN (0x1<<4) //4:4 ++#define RG_USB20_HS_SQ_EN_MODE (0x3<<2) //3:2 ++#define RG_USB20_HS_RCV_EN_MODE (0x3<<0) //1:0 ++ ++//U3D_U2PHYAMON0 ++#define RGO_USB20_GPIO_DM_O (0x1<<1) //1:1 ++#define RGO_USB20_GPIO_DP_O (0x1<<0) //0:0 ++ ++//U3D_U2PHYDCR0 ++#define RG_USB20_CDR_TST (0x3<<30) //31:30 ++#define RG_USB20_GATED_ENB (0x1<<29) //29:29 ++#define RG_USB20_TESTMODE (0x3<<26) //27:26 ++#define RG_USB20_PLL_STABLE (0x1<<25) //25:25 ++#define RG_USB20_PLL_FORCE_ON (0x1<<24) //24:24 ++#define RG_USB20_PHYD_RESERVE (0xffff<<8) //23:8 ++#define RG_USB20_EBTHRLD (0x1<<7) //7:7 ++#define RG_USB20_EARLY_HSTX_I (0x1<<6) //6:6 ++#define RG_USB20_TX_TST (0x1<<5) //5:5 ++#define RG_USB20_NEGEDGE_ENB (0x1<<4) //4:4 ++#define RG_USB20_CDR_FILT (0xf<<0) //3:0 ++ ++//U3D_U2PHYDCR1 ++#define RG_USB20_PROBE_SEL (0xff<<24) //31:24 ++#define RG_USB20_DRVVBUS (0x1<<23) //23:23 ++#define RG_DEBUG_EN (0x1<<22) //22:22 ++#define RG_USB20_OTG_PROBE (0x3<<20) //21:20 ++#define RG_USB20_SW_PLLMODE (0x3<<18) //19:18 ++#define RG_USB20_BERTH (0x3<<16) //17:16 ++#define RG_USB20_LBMODE (0x3<<13) //14:13 ++#define RG_USB20_FORCE_TAP (0x1<<12) //12:12 ++#define RG_USB20_TAPSEL (0xfff<<0) //11:0 ++ ++//U3D_U2PHYDTM0 ++#define RG_UART_MODE (0x3<<30) //31:30 ++#define FORCE_UART_I (0x1<<29) //29:29 ++#define FORCE_UART_BIAS_EN (0x1<<28) //28:28 ++#define FORCE_UART_TX_OE (0x1<<27) //27:27 ++#define FORCE_UART_EN (0x1<<26) //26:26 ++#define FORCE_USB_CLKEN (0x1<<25) //25:25 ++#define FORCE_DRVVBUS (0x1<<24) //24:24 ++#define FORCE_DATAIN (0x1<<23) //23:23 ++#define FORCE_TXVALID (0x1<<22) //22:22 ++#define FORCE_DM_PULLDOWN (0x1<<21) //21:21 ++#define FORCE_DP_PULLDOWN (0x1<<20) //20:20 ++#define FORCE_XCVRSEL (0x1<<19) //19:19 ++#define FORCE_SUSPENDM (0x1<<18) //18:18 ++#define FORCE_TERMSEL (0x1<<17) //17:17 ++#define FORCE_OPMODE (0x1<<16) //16:16 ++#define UTMI_MUXSEL (0x1<<15) //15:15 ++#define RG_RESET (0x1<<14) //14:14 ++#define RG_DATAIN (0xf<<10) //13:10 ++#define RG_TXVALIDH (0x1<<9) //9:9 ++#define RG_TXVALID (0x1<<8) //8:8 ++#define RG_DMPULLDOWN (0x1<<7) //7:7 ++#define RG_DPPULLDOWN (0x1<<6) //6:6 ++#define RG_XCVRSEL (0x3<<4) //5:4 ++#define RG_SUSPENDM (0x1<<3) //3:3 ++#define RG_TERMSEL (0x1<<2) //2:2 ++#define RG_OPMODE (0x3<<0) //1:0 ++ ++//U3D_U2PHYDTM1 ++#define RG_USB20_PRBS7_EN (0x1<<31) //31:31 ++#define RG_USB20_PRBS7_BITCNT (0x3f<<24) //29:24 ++#define RG_USB20_CLK48M_EN (0x1<<23) //23:23 ++#define RG_USB20_CLK60M_EN (0x1<<22) //22:22 ++#define RG_UART_I (0x1<<19) //19:19 ++#define RG_UART_BIAS_EN (0x1<<18) //18:18 ++#define RG_UART_TX_OE (0x1<<17) //17:17 ++#define RG_UART_EN (0x1<<16) //16:16 ++#define FORCE_VBUSVALID (0x1<<13) //13:13 ++#define FORCE_SESSEND (0x1<<12) //12:12 ++#define FORCE_BVALID (0x1<<11) //11:11 ++#define FORCE_AVALID (0x1<<10) //10:10 ++#define FORCE_IDDIG (0x1<<9) //9:9 ++#define FORCE_IDPULLUP (0x1<<8) //8:8 ++#define RG_VBUSVALID (0x1<<5) //5:5 ++#define RG_SESSEND (0x1<<4) //4:4 ++#define RG_BVALID (0x1<<3) //3:3 ++#define RG_AVALID (0x1<<2) //2:2 ++#define RG_IDDIG (0x1<<1) //1:1 ++#define RG_IDPULLUP (0x1<<0) //0:0 ++ ++//U3D_U2PHYDMON0 ++#define RG_USB20_PRBS7_BERTH (0xff<<0) //7:0 ++ ++//U3D_U2PHYDMON1 ++#define USB20_UART_O (0x1<<31) //31:31 ++#define RGO_USB20_LB_PASS (0x1<<30) //30:30 ++#define RGO_USB20_LB_DONE (0x1<<29) //29:29 ++#define AD_USB20_BVALID (0x1<<28) //28:28 ++#define USB20_IDDIG (0x1<<27) //27:27 ++#define AD_USB20_VBUSVALID (0x1<<26) //26:26 ++#define AD_USB20_SESSEND (0x1<<25) //25:25 ++#define AD_USB20_AVALID (0x1<<24) //24:24 ++#define USB20_LINE_STATE (0x3<<22) //23:22 ++#define USB20_HST_DISCON (0x1<<21) //21:21 ++#define USB20_TX_READY (0x1<<20) //20:20 ++#define USB20_RX_ERROR (0x1<<19) //19:19 ++#define USB20_RX_ACTIVE (0x1<<18) //18:18 ++#define USB20_RX_VALIDH (0x1<<17) //17:17 ++#define USB20_RX_VALID (0x1<<16) //16:16 ++#define USB20_DATA_OUT (0xffff<<0) //15:0 ++ ++//U3D_U2PHYDMON2 ++#define RGO_TXVALID_CNT (0xff<<24) //31:24 ++#define RGO_RXACTIVE_CNT (0xff<<16) //23:16 ++#define RGO_USB20_LB_BERCNT (0xff<<8) //15:8 ++#define USB20_PROBE_OUT (0xff<<0) //7:0 ++ ++//U3D_U2PHYDMON3 ++#define RGO_USB20_PRBS7_ERRCNT (0xffff<<16) //31:16 ++#define RGO_USB20_PRBS7_DONE (0x1<<3) //3:3 ++#define RGO_USB20_PRBS7_LOCK (0x1<<2) //2:2 ++#define RGO_USB20_PRBS7_PASS (0x1<<1) //1:1 ++#define RGO_USB20_PRBS7_PASSTH (0x1<<0) //0:0 ++ ++//U3D_U2PHYBC12C ++#define RG_SIFSLV_CHGDT_DEGLCH_CNT (0xf<<28) //31:28 ++#define RG_SIFSLV_CHGDT_CTRL_CNT (0xf<<24) //27:24 ++#define RG_SIFSLV_CHGDT_FORCE_MODE (0x1<<16) //16:16 ++#define RG_CHGDT_ISRC_LEV (0x3<<14) //15:14 ++#define RG_CHGDT_VDATSRC (0x1<<13) //13:13 ++#define RG_CHGDT_BGVREF_SEL (0x7<<10) //12:10 ++#define RG_CHGDT_RDVREF_SEL (0x3<<8) //9:8 ++#define RG_CHGDT_ISRC_DP (0x1<<7) //7:7 ++#define RG_SIFSLV_CHGDT_OPOUT_DM (0x1<<6) //6:6 ++#define RG_CHGDT_VDAT_DM (0x1<<5) //5:5 ++#define RG_CHGDT_OPOUT_DP (0x1<<4) //4:4 ++#define RG_SIFSLV_CHGDT_VDAT_DP (0x1<<3) //3:3 ++#define RG_SIFSLV_CHGDT_COMP_EN (0x1<<2) //2:2 ++#define RG_SIFSLV_CHGDT_OPDRV_EN (0x1<<1) //1:1 ++#define RG_CHGDT_EN (0x1<<0) //0:0 ++ ++//U3D_U2PHYBC12C1 ++#define RG_CHGDT_REV (0xff<<0) //7:0 ++ ++//U3D_REGFCOM ++#define RG_PAGE (0xff<<24) //31:24 ++#define I2C_MODE (0x1<<16) //16:16 ++ ++ ++/* OFFSET */ ++ ++//U3D_U2PHYAC0 ++#define RG_USB20_USBPLL_DIVEN_OFST (28) ++#define RG_USB20_USBPLL_CKCTRL_OFST (26) ++#define RG_USB20_USBPLL_PREDIV_OFST (24) ++#define RG_USB20_USBPLL_FORCE_ON_OFST (23) ++#define RG_USB20_USBPLL_FBDIV_OFST (16) ++#define RG_USB20_REF_EN_OFST (15) ++#define RG_USB20_INTR_EN_OFST (14) ++#define RG_USB20_BG_TRIM_OFST (8) ++#define RG_USB20_BG_RBSEL_OFST (6) ++#define RG_USB20_BG_RASEL_OFST (4) ++#define RG_USB20_BGR_DIV_OFST (2) ++#define RG_SIFSLV_CHP_EN_OFST (1) ++#define RG_SIFSLV_BGR_EN_OFST (0) ++ ++//U3D_U2PHYAC1 ++#define RG_USB20_VRT_VREF_SEL_OFST (28) ++#define RG_USB20_TERM_VREF_SEL_OFST (24) ++#define RG_USB20_MPX_SEL_OFST (16) ++#define RG_USB20_MPX_OUT_SEL_OFST (12) ++#define RG_USB20_TX_PH_ROT_SEL_OFST (8) ++#define RG_USB20_USBPLL_ACCEN_OFST (3) ++#define RG_USB20_USBPLL_LF_OFST (2) ++#define RG_USB20_USBPLL_BR_OFST (1) ++#define RG_USB20_USBPLL_BP_OFST (0) ++ ++//U3D_U2PHYAC2 ++#define RG_SIFSLV_MAC_BANDGAP_EN_OFST (17) ++#define RG_SIFSLV_MAC_CHOPPER_EN_OFST (16) ++#define RG_USB20_CLKREF_REV_OFST (0) ++ ++//U3D_U2PHYACR0 ++#define RG_USB20_ICUSB_EN_OFST (24) ++#define RG_USB20_HSTX_SRCAL_EN_OFST (23) ++#define RG_USB20_HSTX_SRCTRL_OFST (16) ++#define RG_USB20_LS_CR_OFST (12) ++#define RG_USB20_FS_CR_OFST (8) ++#define RG_USB20_LS_SR_OFST (4) ++#define RG_USB20_FS_SR_OFST (0) ++ ++//U3D_U2PHYACR1 ++#define RG_USB20_INIT_SQ_EN_DG_OFST (28) ++#define RG_USB20_SQD_OFST (24) ++#define RG_USB20_HSTX_TMODE_SEL_OFST (20) ++#define RG_USB20_HSTX_TMODE_EN_OFST (19) ++#define RG_USB20_PHYD_MONEN_OFST (18) ++#define RG_USB20_INLPBK_EN_OFST (17) ++#define RG_USB20_CHIRP_EN_OFST (16) ++#define RG_USB20_DM_ABIST_SOURCE_EN_OFST (15) ++#define RG_USB20_DM_ABIST_SELE_OFST (8) ++#define RG_USB20_DP_ABIST_SOURCE_EN_OFST (7) ++#define RG_USB20_DP_ABIST_SELE_OFST (0) ++ ++//U3D_U2PHYACR2 ++#define RG_USB20_OTG_ABIST_SELE_OFST (29) ++#define RG_USB20_OTG_ABIST_EN_OFST (28) ++#define RG_USB20_OTG_VBUSCMP_EN_OFST (27) ++#define RG_USB20_OTG_VBUSTH_OFST (24) ++#define RG_USB20_DISC_FIT_EN_OFST (22) ++#define RG_USB20_DISCD_OFST (20) ++#define RG_USB20_DISCTH_OFST (16) ++#define RG_USB20_SQCAL_EN_OFST (15) ++#define RG_USB20_SQCAL_OFST (8) ++#define RG_USB20_SQTH_OFST (0) ++ ++//U3D_U2PHYACR3 ++#define RG_USB20_HSTX_DBIST_OFST (28) ++#define RG_USB20_HSTX_BIST_EN_OFST (26) ++#define RG_USB20_HSTX_I_EN_MODE_OFST (24) ++#define RG_USB20_HSRX_TMODE_EN_OFST (23) ++#define RG_USB20_HSRX_BIAS_EN_SEL_OFST (20) ++#define RG_USB20_USB11_TMODE_EN_OFST (19) ++#define RG_USB20_TMODE_FS_LS_TX_EN_OFST (18) ++#define RG_USB20_TMODE_FS_LS_RCV_EN_OFST (17) ++#define RG_USB20_TMODE_FS_LS_MODE_OFST (16) ++#define RG_USB20_HS_TERM_EN_MODE_OFST (13) ++#define RG_USB20_PUPD_BIST_EN_OFST (12) ++#define RG_USB20_EN_PU_DM_OFST (11) ++#define RG_USB20_EN_PD_DM_OFST (10) ++#define RG_USB20_EN_PU_DP_OFST (9) ++#define RG_USB20_EN_PD_DP_OFST (8) ++#define RG_USB20_PHY_REV_OFST (0) ++ ++//U3D_U2PHYACR4 ++#define RG_USB20_DP_100K_MODE_OFST (18) ++#define RG_USB20_DM_100K_EN_OFST (17) ++#define USB20_DP_100K_EN_OFST (16) ++#define USB20_GPIO_DM_I_OFST (15) ++#define USB20_GPIO_DP_I_OFST (14) ++#define USB20_GPIO_DM_OE_OFST (13) ++#define USB20_GPIO_DP_OE_OFST (12) ++#define RG_USB20_GPIO_CTL_OFST (9) ++#define USB20_GPIO_MODE_OFST (8) ++#define RG_USB20_TX_BIAS_EN_OFST (5) ++#define RG_USB20_TX_VCMPDN_EN_OFST (4) ++#define RG_USB20_HS_SQ_EN_MODE_OFST (2) ++#define RG_USB20_HS_RCV_EN_MODE_OFST (0) ++ ++//U3D_U2PHYAMON0 ++#define RGO_USB20_GPIO_DM_O_OFST (1) ++#define RGO_USB20_GPIO_DP_O_OFST (0) ++ ++//U3D_U2PHYDCR0 ++#define RG_USB20_CDR_TST_OFST (30) ++#define RG_USB20_GATED_ENB_OFST (29) ++#define RG_USB20_TESTMODE_OFST (26) ++#define RG_USB20_PLL_STABLE_OFST (25) ++#define RG_USB20_PLL_FORCE_ON_OFST (24) ++#define RG_USB20_PHYD_RESERVE_OFST (8) ++#define RG_USB20_EBTHRLD_OFST (7) ++#define RG_USB20_EARLY_HSTX_I_OFST (6) ++#define RG_USB20_TX_TST_OFST (5) ++#define RG_USB20_NEGEDGE_ENB_OFST (4) ++#define RG_USB20_CDR_FILT_OFST (0) ++ ++//U3D_U2PHYDCR1 ++#define RG_USB20_PROBE_SEL_OFST (24) ++#define RG_USB20_DRVVBUS_OFST (23) ++#define RG_DEBUG_EN_OFST (22) ++#define RG_USB20_OTG_PROBE_OFST (20) ++#define RG_USB20_SW_PLLMODE_OFST (18) ++#define RG_USB20_BERTH_OFST (16) ++#define RG_USB20_LBMODE_OFST (13) ++#define RG_USB20_FORCE_TAP_OFST (12) ++#define RG_USB20_TAPSEL_OFST (0) ++ ++//U3D_U2PHYDTM0 ++#define RG_UART_MODE_OFST (30) ++#define FORCE_UART_I_OFST (29) ++#define FORCE_UART_BIAS_EN_OFST (28) ++#define FORCE_UART_TX_OE_OFST (27) ++#define FORCE_UART_EN_OFST (26) ++#define FORCE_USB_CLKEN_OFST (25) ++#define FORCE_DRVVBUS_OFST (24) ++#define FORCE_DATAIN_OFST (23) ++#define FORCE_TXVALID_OFST (22) ++#define FORCE_DM_PULLDOWN_OFST (21) ++#define FORCE_DP_PULLDOWN_OFST (20) ++#define FORCE_XCVRSEL_OFST (19) ++#define FORCE_SUSPENDM_OFST (18) ++#define FORCE_TERMSEL_OFST (17) ++#define FORCE_OPMODE_OFST (16) ++#define UTMI_MUXSEL_OFST (15) ++#define RG_RESET_OFST (14) ++#define RG_DATAIN_OFST (10) ++#define RG_TXVALIDH_OFST (9) ++#define RG_TXVALID_OFST (8) ++#define RG_DMPULLDOWN_OFST (7) ++#define RG_DPPULLDOWN_OFST (6) ++#define RG_XCVRSEL_OFST (4) ++#define RG_SUSPENDM_OFST (3) ++#define RG_TERMSEL_OFST (2) ++#define RG_OPMODE_OFST (0) ++ ++//U3D_U2PHYDTM1 ++#define RG_USB20_PRBS7_EN_OFST (31) ++#define RG_USB20_PRBS7_BITCNT_OFST (24) ++#define RG_USB20_CLK48M_EN_OFST (23) ++#define RG_USB20_CLK60M_EN_OFST (22) ++#define RG_UART_I_OFST (19) ++#define RG_UART_BIAS_EN_OFST (18) ++#define RG_UART_TX_OE_OFST (17) ++#define RG_UART_EN_OFST (16) ++#define FORCE_VBUSVALID_OFST (13) ++#define FORCE_SESSEND_OFST (12) ++#define FORCE_BVALID_OFST (11) ++#define FORCE_AVALID_OFST (10) ++#define FORCE_IDDIG_OFST (9) ++#define FORCE_IDPULLUP_OFST (8) ++#define RG_VBUSVALID_OFST (5) ++#define RG_SESSEND_OFST (4) ++#define RG_BVALID_OFST (3) ++#define RG_AVALID_OFST (2) ++#define RG_IDDIG_OFST (1) ++#define RG_IDPULLUP_OFST (0) ++ ++//U3D_U2PHYDMON0 ++#define RG_USB20_PRBS7_BERTH_OFST (0) ++ ++//U3D_U2PHYDMON1 ++#define USB20_UART_O_OFST (31) ++#define RGO_USB20_LB_PASS_OFST (30) ++#define RGO_USB20_LB_DONE_OFST (29) ++#define AD_USB20_BVALID_OFST (28) ++#define USB20_IDDIG_OFST (27) ++#define AD_USB20_VBUSVALID_OFST (26) ++#define AD_USB20_SESSEND_OFST (25) ++#define AD_USB20_AVALID_OFST (24) ++#define USB20_LINE_STATE_OFST (22) ++#define USB20_HST_DISCON_OFST (21) ++#define USB20_TX_READY_OFST (20) ++#define USB20_RX_ERROR_OFST (19) ++#define USB20_RX_ACTIVE_OFST (18) ++#define USB20_RX_VALIDH_OFST (17) ++#define USB20_RX_VALID_OFST (16) ++#define USB20_DATA_OUT_OFST (0) ++ ++//U3D_U2PHYDMON2 ++#define RGO_TXVALID_CNT_OFST (24) ++#define RGO_RXACTIVE_CNT_OFST (16) ++#define RGO_USB20_LB_BERCNT_OFST (8) ++#define USB20_PROBE_OUT_OFST (0) ++ ++//U3D_U2PHYDMON3 ++#define RGO_USB20_PRBS7_ERRCNT_OFST (16) ++#define RGO_USB20_PRBS7_DONE_OFST (3) ++#define RGO_USB20_PRBS7_LOCK_OFST (2) ++#define RGO_USB20_PRBS7_PASS_OFST (1) ++#define RGO_USB20_PRBS7_PASSTH_OFST (0) ++ ++//U3D_U2PHYBC12C ++#define RG_SIFSLV_CHGDT_DEGLCH_CNT_OFST (28) ++#define RG_SIFSLV_CHGDT_CTRL_CNT_OFST (24) ++#define RG_SIFSLV_CHGDT_FORCE_MODE_OFST (16) ++#define RG_CHGDT_ISRC_LEV_OFST (14) ++#define RG_CHGDT_VDATSRC_OFST (13) ++#define RG_CHGDT_BGVREF_SEL_OFST (10) ++#define RG_CHGDT_RDVREF_SEL_OFST (8) ++#define RG_CHGDT_ISRC_DP_OFST (7) ++#define RG_SIFSLV_CHGDT_OPOUT_DM_OFST (6) ++#define RG_CHGDT_VDAT_DM_OFST (5) ++#define RG_CHGDT_OPOUT_DP_OFST (4) ++#define RG_SIFSLV_CHGDT_VDAT_DP_OFST (3) ++#define RG_SIFSLV_CHGDT_COMP_EN_OFST (2) ++#define RG_SIFSLV_CHGDT_OPDRV_EN_OFST (1) ++#define RG_CHGDT_EN_OFST (0) ++ ++//U3D_U2PHYBC12C1 ++#define RG_CHGDT_REV_OFST (0) ++ ++//U3D_REGFCOM ++#define RG_PAGE_OFST (24) ++#define I2C_MODE_OFST (16) ++ ++ ++/////////////////////////////////////////////////////////////////////////////// ++ ++struct u3phya_reg { ++ //0x0 ++ PHY_LE32 reg0; ++ PHY_LE32 reg1; ++ PHY_LE32 reg2; ++ PHY_LE32 reg3; ++ //0x10 ++ PHY_LE32 reg4; ++ PHY_LE32 reg5; ++ PHY_LE32 reg6; ++ PHY_LE32 reg7; ++ //0x20 ++ PHY_LE32 reg8; ++ PHY_LE32 reg9; ++ PHY_LE32 rega; ++ PHY_LE32 regb; ++ //0x30 ++ PHY_LE32 regc; ++ PHY_LE32 regd; ++ PHY_LE32 rege; ++}; ++ ++//U3D_reg0 ++#define RG_SSUSB_BGR_EN (0x1<<31) //31:31 ++#define RG_SSUSB_CHPEN (0x1<<30) //30:30 ++#define RG_SSUSB_BG_DIV (0x3<<28) //29:28 ++#define RG_SSUSB_INTR_EN (0x1<<26) //26:26 ++#define RG_SSUSB_MPX_OUT_SEL (0x3<<24) //25:24 ++#define RG_SSUSB_MPX_SEL (0xff<<16) //23:16 ++#define RG_SSUSB_REF_EN (0x1<<15) //15:15 ++#define RG_SSUSB_VRT_VREF_SEL (0xf<<11) //14:11 ++#define RG_SSUSB_BG_RASEL (0x3<<9) //10:9 ++#define RG_SSUSB_BG_RBSEL (0x3<<7) //8:7 ++#define RG_SSUSB_BG_MONEN (0x1<<6) //6:6 ++#define RG_PCIE_CLKDRV_OFFSET (0x3<<0) //1:0 ++ ++//U3D_reg1 ++#define RG_PCIE_CLKDRV_SLEW (0x3<<30) //31:30 ++#define RG_PCIE_CLKDRV_AMP (0x7<<27) //29:27 ++#define RG_SSUSB_XTAL_TST_A2DCK_EN (0x1<<26) //26:26 ++#define RG_SSUSB_XTAL_MON_EN (0x1<<25) //25:25 ++#define RG_SSUSB_XTAL_HYS (0x1<<24) //24:24 ++#define RG_SSUSB_XTAL_TOP_RESERVE (0xffff<<8) //23:8 ++#define RG_SSUSB_SYSPLL_RESERVE (0xf<<4) //7:4 ++#define RG_SSUSB_SYSPLL_FBSEL (0x3<<2) //3:2 ++#define RG_SSUSB_SYSPLL_PREDIV (0x3<<0) //1:0 ++ ++//U3D_reg2 ++#define RG_SSUSB_SYSPLL_LF (0x1<<31) //31:31 ++#define RG_SSUSB_SYSPLL_FBDIV (0x7f<<24) //30:24 ++#define RG_SSUSB_SYSPLL_POSDIV (0x3<<22) //23:22 ++#define RG_SSUSB_SYSPLL_VCO_DIV_SEL (0x1<<21) //21:21 ++#define RG_SSUSB_SYSPLL_BLP (0x1<<20) //20:20 ++#define RG_SSUSB_SYSPLL_BP (0x1<<19) //19:19 ++#define RG_SSUSB_SYSPLL_BR (0x1<<18) //18:18 ++#define RG_SSUSB_SYSPLL_BC (0x1<<17) //17:17 ++#define RG_SSUSB_SYSPLL_DIVEN (0x7<<14) //16:14 ++#define RG_SSUSB_SYSPLL_FPEN (0x1<<13) //13:13 ++#define RG_SSUSB_SYSPLL_MONCK_EN (0x1<<12) //12:12 ++#define RG_SSUSB_SYSPLL_MONVC_EN (0x1<<11) //11:11 ++#define RG_SSUSB_SYSPLL_MONREF_EN (0x1<<10) //10:10 ++#define RG_SSUSB_SYSPLL_VOD_EN (0x1<<9) //9:9 ++#define RG_SSUSB_SYSPLL_CK_SEL (0x1<<8) //8:8 ++ ++//U3D_reg3 ++#define RG_SSUSB_SYSPLL_TOP_RESERVE (0xffff<<16) //31:16 ++ ++//U3D_reg4 ++#define RG_SSUSB_SYSPLL_PCW_NCPO (0x7fffffff<<1) //31:1 ++ ++//U3D_reg5 ++#define RG_SSUSB_SYSPLL_DDS_PI_C (0x7<<29) //31:29 ++#define RG_SSUSB_SYSPLL_DDS_HF_EN (0x1<<28) //28:28 ++#define RG_SSUSB_SYSPLL_DDS_PREDIV2 (0x1<<27) //27:27 ++#define RG_SSUSB_SYSPLL_DDS_POSTDIV2 (0x1<<26) //26:26 ++#define RG_SSUSB_SYSPLL_DDS_PI_PL_EN (0x1<<25) //25:25 ++#define RG_SSUSB_SYSPLL_DDS_PI_RST_SEL (0x1<<24) //24:24 ++#define RG_SSUSB_SYSPLL_DDS_MONEN (0x1<<23) //23:23 ++#define RG_SSUSB_SYSPLL_DDS_LPF_EN (0x1<<22) //22:22 ++#define RG_SSUSB_SYSPLL_CLK_PH_INV (0x1<<21) //21:21 ++#define RG_SSUSB_SYSPLL_DDS_SEL_EXT (0x1<<20) //20:20 ++#define RG_SSUSB_SYSPLL_DDS_DMY (0xffff<<0) //15:0 ++ ++//U3D_reg6 ++#define RG_SSUSB_TX250MCK_INVB (0x1<<31) //31:31 ++#define RG_SSUSB_IDRV_ITAILOP_EN (0x1<<30) //30:30 ++#define RG_SSUSB_IDRV_CALIB (0x3f<<24) //29:24 ++#define RG_SSUSB_TX_R50_FON (0x1<<23) //23:23 ++#define RG_SSUSB_TX_SR (0x7<<20) //22:20 ++#define RG_SSUSB_TX_EIDLE_CM (0xf<<16) //19:16 ++#define RG_SSUSB_RXDET_RSEL (0x3<<14) //15:14 ++#define RG_SSUSB_RXDET_VTHSEL (0x3<<12) //13:12 ++#define RG_SSUSB_CKMON_EN (0x1<<11) //11:11 ++#define RG_SSUSB_CKMON_SEL (0x7<<8) //10:8 ++#define RG_SSUSB_TX_VLMON_EN (0x1<<7) //7:7 ++#define RG_SSUSB_TX_VLMON_SEL (0x1<<6) //6:6 ++#define RG_SSUSB_RXLBTX_EN (0x1<<5) //5:5 ++#define RG_SSUSB_TXLBRX_EN (0x1<<4) //4:4 ++ ++//U3D_reg7 ++#define RG_SSUSB_RESERVE (0xfffff<<12) //31:12 ++#define RG_SSUSB_PLL_CKCTRL (0x3<<10) //11:10 ++#define RG_SSUSB_PLL_POSDIV (0x3<<8) //9:8 ++#define RG_SSUSB_PLL_AUTOK_LOAD (0x1<<7) //7:7 ++#define RG_SSUSB_PLL_LOAD_RSTB (0x1<<6) //6:6 ++#define RG_SSUSB_PLL_EP_EN (0x1<<5) //5:5 ++#define RG_SSUSB_PLL_VOD_EN (0x1<<4) //4:4 ++#define RG_SSUSB_PLL_V11_EN (0x1<<3) //3:3 ++#define RG_SSUSB_PLL_MONREF_EN (0x1<<2) //2:2 ++#define RG_SSUSB_PLL_MONCK_EN (0x1<<1) //1:1 ++#define RG_SSUSB_PLL_MONVC_EN (0x1<<0) //0:0 ++ ++//U3D_reg8 ++#define RG_SSUSB_PLL_RESERVE (0xffff<<0) //15:0 ++ ++//U3D_reg9 ++#define RG_SSUSB_PLL_DDS_DMY (0xffff<<16) //31:16 ++#define RG_SSUSB_PLL_SSC_PRD (0xffff<<0) //15:0 ++ ++//U3D_regA ++#define RG_SSUSB_PLL_SSC_PHASE_INI (0x1<<31) //31:31 ++#define RG_SSUSB_PLL_SSC_TRI_EN (0x1<<30) //30:30 ++#define RG_SSUSB_PLL_CLK_PH_INV (0x1<<29) //29:29 ++#define RG_SSUSB_PLL_DDS_LPF_EN (0x1<<28) //28:28 ++#define RG_SSUSB_PLL_DDS_VADJ (0x7<<21) //23:21 ++#define RG_SSUSB_PLL_DDS_MONEN (0x1<<20) //20:20 ++#define RG_SSUSB_PLL_DDS_PS_VADJ (0x7<<17) //19:17 ++#define RG_SSUSB_PLL_DDS_SEL_EXT (0x1<<16) //16:16 ++#define RG_SSUSB_CDR_PD_DIV_BYPASS (0x1<<15) //15:15 ++#define RG_SSUSB_CDR_PD_DIV_SEL (0x1<<14) //14:14 ++#define RG_SSUSB_CDR_CPBIAS_SEL (0x1<<13) //13:13 ++#define RG_SSUSB_CDR_OSCDET_EN (0x1<<12) //12:12 ++#define RG_SSUSB_CDR_MONMUX (0x1<<11) //11:11 ++#define RG_SSUSB_CDR_CKCTRL (0x3<<9) //10:9 ++#define RG_SSUSB_CDR_ACCEN (0x1<<8) //8:8 ++#define RG_SSUSB_CDR_BYPASS (0x3<<6) //7:6 ++#define RG_SSUSB_CDR_PI_SLEW (0x3<<4) //5:4 ++#define RG_SSUSB_CDR_EPEN (0x1<<3) //3:3 ++#define RG_SSUSB_CDR_AUTOK_LOAD (0x1<<2) //2:2 ++#define RG_SSUSB_CDR_LOAD_RSTB (0x1<<1) //1:1 ++#define RG_SSUSB_CDR_MONEN (0x1<<0) //0:0 ++ ++//U3D_regB ++#define RG_SSUSB_CDR_MONEN_DIG (0x1<<31) //31:31 ++#define RG_SSUSB_CDR_REGOD (0x3<<29) //30:29 ++#define RG_SSUSB_RX_DAC_EN (0x1<<26) //26:26 ++#define RG_SSUSB_RX_DAC_PWD (0x1<<25) //25:25 ++#define RG_SSUSB_EQ_CURSEL (0x1<<24) //24:24 ++#define RG_SSUSB_RX_DAC_MUX (0x1f<<19) //23:19 ++#define RG_SSUSB_RX_R2T_EN (0x1<<18) //18:18 ++#define RG_SSUSB_RX_T2R_EN (0x1<<17) //17:17 ++#define RG_SSUSB_RX_50_LOWER (0x7<<14) //16:14 ++#define RG_SSUSB_RX_50_TAR (0x3<<12) //13:12 ++#define RG_SSUSB_RX_SW_CTRL (0xf<<7) //10:7 ++#define RG_PCIE_SIGDET_VTH (0x3<<5) //6:5 ++#define RG_PCIE_SIGDET_LPF (0x3<<3) //4:3 ++#define RG_SSUSB_LFPS_MON_EN (0x1<<2) //2:2 ++ ++//U3D_regC ++#define RG_SSUSB_RXAFE_DCMON_SEL (0xf<<28) //31:28 ++#define RG_SSUSB_CDR_RESERVE (0xff<<16) //23:16 ++#define RG_SSUSB_RXAFE_RESERVE (0xff<<8) //15:8 ++#define RG_PCIE_RX_RESERVE (0xff<<0) //7:0 ++ ++//U3D_redD ++#define RGS_SSUSB_CDR_NO_OSC (0x1<<8) //8:8 ++#define RGS_SSUSB_RX_DEBUG_RESERVE (0xff<<0) //7:0 ++ ++//U3D_regE ++#define RG_SSUSB_INT_BIAS_SEL (0x1<<4) //4:4 ++#define RG_SSUSB_EXT_BIAS_SEL (0x1<<3) //3:3 ++#define RG_SSUSB_RX_P1_ENTRY_PASS (0x1<<2) //2:2 ++#define RG_SSUSB_RX_PD_RST (0x1<<1) //1:1 ++#define RG_SSUSB_RX_PD_RST_PASS (0x1<<0) //0:0 ++ ++ ++/* OFFSET */ ++ ++//U3D_reg0 ++#define RG_SSUSB_BGR_EN_OFST (31) ++#define RG_SSUSB_CHPEN_OFST (30) ++#define RG_SSUSB_BG_DIV_OFST (28) ++#define RG_SSUSB_INTR_EN_OFST (26) ++#define RG_SSUSB_MPX_OUT_SEL_OFST (24) ++#define RG_SSUSB_MPX_SEL_OFST (16) ++#define RG_SSUSB_REF_EN_OFST (15) ++#define RG_SSUSB_VRT_VREF_SEL_OFST (11) ++#define RG_SSUSB_BG_RASEL_OFST (9) ++#define RG_SSUSB_BG_RBSEL_OFST (7) ++#define RG_SSUSB_BG_MONEN_OFST (6) ++#define RG_PCIE_CLKDRV_OFFSET_OFST (0) ++ ++//U3D_reg1 ++#define RG_PCIE_CLKDRV_SLEW_OFST (30) ++#define RG_PCIE_CLKDRV_AMP_OFST (27) ++#define RG_SSUSB_XTAL_TST_A2DCK_EN_OFST (26) ++#define RG_SSUSB_XTAL_MON_EN_OFST (25) ++#define RG_SSUSB_XTAL_HYS_OFST (24) ++#define RG_SSUSB_XTAL_TOP_RESERVE_OFST (8) ++#define RG_SSUSB_SYSPLL_RESERVE_OFST (4) ++#define RG_SSUSB_SYSPLL_FBSEL_OFST (2) ++#define RG_SSUSB_SYSPLL_PREDIV_OFST (0) ++ ++//U3D_reg2 ++#define RG_SSUSB_SYSPLL_LF_OFST (31) ++#define RG_SSUSB_SYSPLL_FBDIV_OFST (24) ++#define RG_SSUSB_SYSPLL_POSDIV_OFST (22) ++#define RG_SSUSB_SYSPLL_VCO_DIV_SEL_OFST (21) ++#define RG_SSUSB_SYSPLL_BLP_OFST (20) ++#define RG_SSUSB_SYSPLL_BP_OFST (19) ++#define RG_SSUSB_SYSPLL_BR_OFST (18) ++#define RG_SSUSB_SYSPLL_BC_OFST (17) ++#define RG_SSUSB_SYSPLL_DIVEN_OFST (14) ++#define RG_SSUSB_SYSPLL_FPEN_OFST (13) ++#define RG_SSUSB_SYSPLL_MONCK_EN_OFST (12) ++#define RG_SSUSB_SYSPLL_MONVC_EN_OFST (11) ++#define RG_SSUSB_SYSPLL_MONREF_EN_OFST (10) ++#define RG_SSUSB_SYSPLL_VOD_EN_OFST (9) ++#define RG_SSUSB_SYSPLL_CK_SEL_OFST (8) ++ ++//U3D_reg3 ++#define RG_SSUSB_SYSPLL_TOP_RESERVE_OFST (16) ++ ++//U3D_reg4 ++#define RG_SSUSB_SYSPLL_PCW_NCPO_OFST (1) ++ ++//U3D_reg5 ++#define RG_SSUSB_SYSPLL_DDS_PI_C_OFST (29) ++#define RG_SSUSB_SYSPLL_DDS_HF_EN_OFST (28) ++#define RG_SSUSB_SYSPLL_DDS_PREDIV2_OFST (27) ++#define RG_SSUSB_SYSPLL_DDS_POSTDIV2_OFST (26) ++#define RG_SSUSB_SYSPLL_DDS_PI_PL_EN_OFST (25) ++#define RG_SSUSB_SYSPLL_DDS_PI_RST_SEL_OFST (24) ++#define RG_SSUSB_SYSPLL_DDS_MONEN_OFST (23) ++#define RG_SSUSB_SYSPLL_DDS_LPF_EN_OFST (22) ++#define RG_SSUSB_SYSPLL_CLK_PH_INV_OFST (21) ++#define RG_SSUSB_SYSPLL_DDS_SEL_EXT_OFST (20) ++#define RG_SSUSB_SYSPLL_DDS_DMY_OFST (0) ++ ++//U3D_reg6 ++#define RG_SSUSB_TX250MCK_INVB_OFST (31) ++#define RG_SSUSB_IDRV_ITAILOP_EN_OFST (30) ++#define RG_SSUSB_IDRV_CALIB_OFST (24) ++#define RG_SSUSB_TX_R50_FON_OFST (23) ++#define RG_SSUSB_TX_SR_OFST (20) ++#define RG_SSUSB_TX_EIDLE_CM_OFST (16) ++#define RG_SSUSB_RXDET_RSEL_OFST (14) ++#define RG_SSUSB_RXDET_VTHSEL_OFST (12) ++#define RG_SSUSB_CKMON_EN_OFST (11) ++#define RG_SSUSB_CKMON_SEL_OFST (8) ++#define RG_SSUSB_TX_VLMON_EN_OFST (7) ++#define RG_SSUSB_TX_VLMON_SEL_OFST (6) ++#define RG_SSUSB_RXLBTX_EN_OFST (5) ++#define RG_SSUSB_TXLBRX_EN_OFST (4) ++ ++//U3D_reg7 ++#define RG_SSUSB_RESERVE_OFST (12) ++#define RG_SSUSB_PLL_CKCTRL_OFST (10) ++#define RG_SSUSB_PLL_POSDIV_OFST (8) ++#define RG_SSUSB_PLL_AUTOK_LOAD_OFST (7) ++#define RG_SSUSB_PLL_LOAD_RSTB_OFST (6) ++#define RG_SSUSB_PLL_EP_EN_OFST (5) ++#define RG_SSUSB_PLL_VOD_EN_OFST (4) ++#define RG_SSUSB_PLL_V11_EN_OFST (3) ++#define RG_SSUSB_PLL_MONREF_EN_OFST (2) ++#define RG_SSUSB_PLL_MONCK_EN_OFST (1) ++#define RG_SSUSB_PLL_MONVC_EN_OFST (0) ++ ++//U3D_reg8 ++#define RG_SSUSB_PLL_RESERVE_OFST (0) ++ ++//U3D_reg9 ++#define RG_SSUSB_PLL_DDS_DMY_OFST (16) ++#define RG_SSUSB_PLL_SSC_PRD_OFST (0) ++ ++//U3D_regA ++#define RG_SSUSB_PLL_SSC_PHASE_INI_OFST (31) ++#define RG_SSUSB_PLL_SSC_TRI_EN_OFST (30) ++#define RG_SSUSB_PLL_CLK_PH_INV_OFST (29) ++#define RG_SSUSB_PLL_DDS_LPF_EN_OFST (28) ++#define RG_SSUSB_PLL_DDS_VADJ_OFST (21) ++#define RG_SSUSB_PLL_DDS_MONEN_OFST (20) ++#define RG_SSUSB_PLL_DDS_PS_VADJ_OFST (17) ++#define RG_SSUSB_PLL_DDS_SEL_EXT_OFST (16) ++#define RG_SSUSB_CDR_PD_DIV_BYPASS_OFST (15) ++#define RG_SSUSB_CDR_PD_DIV_SEL_OFST (14) ++#define RG_SSUSB_CDR_CPBIAS_SEL_OFST (13) ++#define RG_SSUSB_CDR_OSCDET_EN_OFST (12) ++#define RG_SSUSB_CDR_MONMUX_OFST (11) ++#define RG_SSUSB_CDR_CKCTRL_OFST (9) ++#define RG_SSUSB_CDR_ACCEN_OFST (8) ++#define RG_SSUSB_CDR_BYPASS_OFST (6) ++#define RG_SSUSB_CDR_PI_SLEW_OFST (4) ++#define RG_SSUSB_CDR_EPEN_OFST (3) ++#define RG_SSUSB_CDR_AUTOK_LOAD_OFST (2) ++#define RG_SSUSB_CDR_LOAD_RSTB_OFST (1) ++#define RG_SSUSB_CDR_MONEN_OFST (0) ++ ++//U3D_regB ++#define RG_SSUSB_CDR_MONEN_DIG_OFST (31) ++#define RG_SSUSB_CDR_REGOD_OFST (29) ++#define RG_SSUSB_RX_DAC_EN_OFST (26) ++#define RG_SSUSB_RX_DAC_PWD_OFST (25) ++#define RG_SSUSB_EQ_CURSEL_OFST (24) ++#define RG_SSUSB_RX_DAC_MUX_OFST (19) ++#define RG_SSUSB_RX_R2T_EN_OFST (18) ++#define RG_SSUSB_RX_T2R_EN_OFST (17) ++#define RG_SSUSB_RX_50_LOWER_OFST (14) ++#define RG_SSUSB_RX_50_TAR_OFST (12) ++#define RG_SSUSB_RX_SW_CTRL_OFST (7) ++#define RG_PCIE_SIGDET_VTH_OFST (5) ++#define RG_PCIE_SIGDET_LPF_OFST (3) ++#define RG_SSUSB_LFPS_MON_EN_OFST (2) ++ ++//U3D_regC ++#define RG_SSUSB_RXAFE_DCMON_SEL_OFST (28) ++#define RG_SSUSB_CDR_RESERVE_OFST (16) ++#define RG_SSUSB_RXAFE_RESERVE_OFST (8) ++#define RG_PCIE_RX_RESERVE_OFST (0) ++ ++//U3D_redD ++#define RGS_SSUSB_CDR_NO_OSC_OFST (8) ++#define RGS_SSUSB_RX_DEBUG_RESERVE_OFST (0) ++ ++//U3D_regE ++#define RG_SSUSB_INT_BIAS_SEL_OFST (4) ++#define RG_SSUSB_EXT_BIAS_SEL_OFST (3) ++#define RG_SSUSB_RX_P1_ENTRY_PASS_OFST (2) ++#define RG_SSUSB_RX_PD_RST_OFST (1) ++#define RG_SSUSB_RX_PD_RST_PASS_OFST (0) ++ ++/////////////////////////////////////////////////////////////////////////////// ++ ++struct u3phya_da_reg { ++ //0x0 ++ PHY_LE32 reg0; ++ PHY_LE32 reg1; ++ PHY_LE32 reg4; ++ PHY_LE32 reg5; ++ //0x10 ++ PHY_LE32 reg6; ++ PHY_LE32 reg7; ++ PHY_LE32 reg8; ++ PHY_LE32 reg9; ++ //0x20 ++ PHY_LE32 reg10; ++ PHY_LE32 reg12; ++ PHY_LE32 reg13; ++ PHY_LE32 reg14; ++ //0x30 ++ PHY_LE32 reg15; ++ PHY_LE32 reg16; ++ PHY_LE32 reg19; ++ PHY_LE32 reg20; ++ //0x40 ++ PHY_LE32 reg21; ++ PHY_LE32 reg23; ++ PHY_LE32 reg25; ++ PHY_LE32 reg26; ++ //0x50 ++ PHY_LE32 reg28; ++ PHY_LE32 reg29; ++ PHY_LE32 reg30; ++ PHY_LE32 reg31; ++ //0x60 ++ PHY_LE32 reg32; ++ PHY_LE32 reg33; ++}; ++ ++//U3D_reg0 ++#define RG_PCIE_SPEED_PE2D (0x1<<24) //24:24 ++#define RG_PCIE_SPEED_PE2H (0x1<<23) //23:23 ++#define RG_PCIE_SPEED_PE1D (0x1<<22) //22:22 ++#define RG_PCIE_SPEED_PE1H (0x1<<21) //21:21 ++#define RG_PCIE_SPEED_U3 (0x1<<20) //20:20 ++#define RG_SSUSB_XTAL_EXT_EN_PE2D (0x3<<18) //19:18 ++#define RG_SSUSB_XTAL_EXT_EN_PE2H (0x3<<16) //17:16 ++#define RG_SSUSB_XTAL_EXT_EN_PE1D (0x3<<14) //15:14 ++#define RG_SSUSB_XTAL_EXT_EN_PE1H (0x3<<12) //13:12 ++#define RG_SSUSB_XTAL_EXT_EN_U3 (0x3<<10) //11:10 ++#define RG_SSUSB_CDR_REFCK_SEL_PE2D (0x3<<8) //9:8 ++#define RG_SSUSB_CDR_REFCK_SEL_PE2H (0x3<<6) //7:6 ++#define RG_SSUSB_CDR_REFCK_SEL_PE1D (0x3<<4) //5:4 ++#define RG_SSUSB_CDR_REFCK_SEL_PE1H (0x3<<2) //3:2 ++#define RG_SSUSB_CDR_REFCK_SEL_U3 (0x3<<0) //1:0 ++ ++//U3D_reg1 ++#define RG_USB20_REFCK_SEL_PE2D (0x1<<30) //30:30 ++#define RG_USB20_REFCK_SEL_PE2H (0x1<<29) //29:29 ++#define RG_USB20_REFCK_SEL_PE1D (0x1<<28) //28:28 ++#define RG_USB20_REFCK_SEL_PE1H (0x1<<27) //27:27 ++#define RG_USB20_REFCK_SEL_U3 (0x1<<26) //26:26 ++#define RG_PCIE_REFCK_DIV4_PE2D (0x1<<25) //25:25 ++#define RG_PCIE_REFCK_DIV4_PE2H (0x1<<24) //24:24 ++#define RG_PCIE_REFCK_DIV4_PE1D (0x1<<18) //18:18 ++#define RG_PCIE_REFCK_DIV4_PE1H (0x1<<17) //17:17 ++#define RG_PCIE_REFCK_DIV4_U3 (0x1<<16) //16:16 ++#define RG_PCIE_MODE_PE2D (0x1<<8) //8:8 ++#define RG_PCIE_MODE_PE2H (0x1<<3) //3:3 ++#define RG_PCIE_MODE_PE1D (0x1<<2) //2:2 ++#define RG_PCIE_MODE_PE1H (0x1<<1) //1:1 ++#define RG_PCIE_MODE_U3 (0x1<<0) //0:0 ++ ++//U3D_reg4 ++#define RG_SSUSB_PLL_DIVEN_PE2D (0x7<<22) //24:22 ++#define RG_SSUSB_PLL_DIVEN_PE2H (0x7<<19) //21:19 ++#define RG_SSUSB_PLL_DIVEN_PE1D (0x7<<16) //18:16 ++#define RG_SSUSB_PLL_DIVEN_PE1H (0x7<<13) //15:13 ++#define RG_SSUSB_PLL_DIVEN_U3 (0x7<<10) //12:10 ++#define RG_SSUSB_PLL_BC_PE2D (0x3<<8) //9:8 ++#define RG_SSUSB_PLL_BC_PE2H (0x3<<6) //7:6 ++#define RG_SSUSB_PLL_BC_PE1D (0x3<<4) //5:4 ++#define RG_SSUSB_PLL_BC_PE1H (0x3<<2) //3:2 ++#define RG_SSUSB_PLL_BC_U3 (0x3<<0) //1:0 ++ ++//U3D_reg5 ++#define RG_SSUSB_PLL_BR_PE2D (0x7<<27) //29:27 ++#define RG_SSUSB_PLL_BR_PE2H (0x7<<24) //26:24 ++#define RG_SSUSB_PLL_BR_PE1D (0x7<<21) //23:21 ++#define RG_SSUSB_PLL_BR_PE1H (0x7<<18) //20:18 ++#define RG_SSUSB_PLL_BR_U3 (0x7<<15) //17:15 ++#define RG_SSUSB_PLL_IC_PE2D (0x7<<12) //14:12 ++#define RG_SSUSB_PLL_IC_PE2H (0x7<<9) //11:9 ++#define RG_SSUSB_PLL_IC_PE1D (0x7<<6) //8:6 ++#define RG_SSUSB_PLL_IC_PE1H (0x7<<3) //5:3 ++#define RG_SSUSB_PLL_IC_U3 (0x7<<0) //2:0 ++ ++//U3D_reg6 ++#define RG_SSUSB_PLL_IR_PE2D (0xf<<24) //27:24 ++#define RG_SSUSB_PLL_IR_PE2H (0xf<<16) //19:16 ++#define RG_SSUSB_PLL_IR_PE1D (0xf<<8) //11:8 ++#define RG_SSUSB_PLL_IR_PE1H (0xf<<4) //7:4 ++#define RG_SSUSB_PLL_IR_U3 (0xf<<0) //3:0 ++ ++//U3D_reg7 ++#define RG_SSUSB_PLL_BP_PE2D (0xf<<24) //27:24 ++#define RG_SSUSB_PLL_BP_PE2H (0xf<<16) //19:16 ++#define RG_SSUSB_PLL_BP_PE1D (0xf<<8) //11:8 ++#define RG_SSUSB_PLL_BP_PE1H (0xf<<4) //7:4 ++#define RG_SSUSB_PLL_BP_U3 (0xf<<0) //3:0 ++ ++//U3D_reg8 ++#define RG_SSUSB_PLL_FBKSEL_PE2D (0x3<<24) //25:24 ++#define RG_SSUSB_PLL_FBKSEL_PE2H (0x3<<16) //17:16 ++#define RG_SSUSB_PLL_FBKSEL_PE1D (0x3<<8) //9:8 ++#define RG_SSUSB_PLL_FBKSEL_PE1H (0x3<<2) //3:2 ++#define RG_SSUSB_PLL_FBKSEL_U3 (0x3<<0) //1:0 ++ ++//U3D_reg9 ++#define RG_SSUSB_PLL_FBKDIV_PE2H (0x7f<<24) //30:24 ++#define RG_SSUSB_PLL_FBKDIV_PE1D (0x7f<<16) //22:16 ++#define RG_SSUSB_PLL_FBKDIV_PE1H (0x7f<<8) //14:8 ++#define RG_SSUSB_PLL_FBKDIV_U3 (0x7f<<0) //6:0 ++ ++//U3D_reg10 ++#define RG_SSUSB_PLL_PREDIV_PE2D (0x3<<26) //27:26 ++#define RG_SSUSB_PLL_PREDIV_PE2H (0x3<<24) //25:24 ++#define RG_SSUSB_PLL_PREDIV_PE1D (0x3<<18) //19:18 ++#define RG_SSUSB_PLL_PREDIV_PE1H (0x3<<16) //17:16 ++#define RG_SSUSB_PLL_PREDIV_U3 (0x3<<8) //9:8 ++#define RG_SSUSB_PLL_FBKDIV_PE2D (0x7f<<0) //6:0 ++ ++//U3D_reg12 ++#define RG_SSUSB_PLL_PCW_NCPO_U3 (0x7fffffff<<0) //30:0 ++ ++//U3D_reg13 ++#define RG_SSUSB_PLL_PCW_NCPO_PE1H (0x7fffffff<<0) //30:0 ++ ++//U3D_reg14 ++#define RG_SSUSB_PLL_PCW_NCPO_PE1D (0x7fffffff<<0) //30:0 ++ ++//U3D_reg15 ++#define RG_SSUSB_PLL_PCW_NCPO_PE2H (0x7fffffff<<0) //30:0 ++ ++//U3D_reg16 ++#define RG_SSUSB_PLL_PCW_NCPO_PE2D (0x7fffffff<<0) //30:0 ++ ++//U3D_reg19 ++#define RG_SSUSB_PLL_SSC_DELTA1_PE1H (0xffff<<16) //31:16 ++#define RG_SSUSB_PLL_SSC_DELTA1_U3 (0xffff<<0) //15:0 ++ ++//U3D_reg20 ++#define RG_SSUSB_PLL_SSC_DELTA1_PE2H (0xffff<<16) //31:16 ++#define RG_SSUSB_PLL_SSC_DELTA1_PE1D (0xffff<<0) //15:0 ++ ++//U3D_reg21 ++#define RG_SSUSB_PLL_SSC_DELTA_U3 (0xffff<<16) //31:16 ++#define RG_SSUSB_PLL_SSC_DELTA1_PE2D (0xffff<<0) //15:0 ++ ++//U3D_reg23 ++#define RG_SSUSB_PLL_SSC_DELTA_PE1D (0xffff<<16) //31:16 ++#define RG_SSUSB_PLL_SSC_DELTA_PE1H (0xffff<<0) //15:0 ++ ++//U3D_reg25 ++#define RG_SSUSB_PLL_SSC_DELTA_PE2D (0xffff<<16) //31:16 ++#define RG_SSUSB_PLL_SSC_DELTA_PE2H (0xffff<<0) //15:0 ++ ++//U3D_reg26 ++#define RG_SSUSB_PLL_REFCKDIV_PE2D (0x1<<25) //25:25 ++#define RG_SSUSB_PLL_REFCKDIV_PE2H (0x1<<24) //24:24 ++#define RG_SSUSB_PLL_REFCKDIV_PE1D (0x1<<16) //16:16 ++#define RG_SSUSB_PLL_REFCKDIV_PE1H (0x1<<8) //8:8 ++#define RG_SSUSB_PLL_REFCKDIV_U3 (0x1<<0) //0:0 ++ ++//U3D_reg28 ++#define RG_SSUSB_CDR_BPA_PE2D (0x3<<24) //25:24 ++#define RG_SSUSB_CDR_BPA_PE2H (0x3<<16) //17:16 ++#define RG_SSUSB_CDR_BPA_PE1D (0x3<<10) //11:10 ++#define RG_SSUSB_CDR_BPA_PE1H (0x3<<8) //9:8 ++#define RG_SSUSB_CDR_BPA_U3 (0x3<<0) //1:0 ++ ++//U3D_reg29 ++#define RG_SSUSB_CDR_BPB_PE2D (0x7<<24) //26:24 ++#define RG_SSUSB_CDR_BPB_PE2H (0x7<<16) //18:16 ++#define RG_SSUSB_CDR_BPB_PE1D (0x7<<6) //8:6 ++#define RG_SSUSB_CDR_BPB_PE1H (0x7<<3) //5:3 ++#define RG_SSUSB_CDR_BPB_U3 (0x7<<0) //2:0 ++ ++//U3D_reg30 ++#define RG_SSUSB_CDR_BR_PE2D (0x7<<24) //26:24 ++#define RG_SSUSB_CDR_BR_PE2H (0x7<<16) //18:16 ++#define RG_SSUSB_CDR_BR_PE1D (0x7<<6) //8:6 ++#define RG_SSUSB_CDR_BR_PE1H (0x7<<3) //5:3 ++#define RG_SSUSB_CDR_BR_U3 (0x7<<0) //2:0 ++ ++//U3D_reg31 ++#define RG_SSUSB_CDR_FBDIV_PE2H (0x7f<<24) //30:24 ++#define RG_SSUSB_CDR_FBDIV_PE1D (0x7f<<16) //22:16 ++#define RG_SSUSB_CDR_FBDIV_PE1H (0x7f<<8) //14:8 ++#define RG_SSUSB_CDR_FBDIV_U3 (0x7f<<0) //6:0 ++ ++//U3D_reg32 ++#define RG_SSUSB_EQ_RSTEP1_PE2D (0x3<<30) //31:30 ++#define RG_SSUSB_EQ_RSTEP1_PE2H (0x3<<28) //29:28 ++#define RG_SSUSB_EQ_RSTEP1_PE1D (0x3<<26) //27:26 ++#define RG_SSUSB_EQ_RSTEP1_PE1H (0x3<<24) //25:24 ++#define RG_SSUSB_EQ_RSTEP1_U3 (0x3<<22) //23:22 ++#define RG_SSUSB_LFPS_DEGLITCH_PE2D (0x3<<20) //21:20 ++#define RG_SSUSB_LFPS_DEGLITCH_PE2H (0x3<<18) //19:18 ++#define RG_SSUSB_LFPS_DEGLITCH_PE1D (0x3<<16) //17:16 ++#define RG_SSUSB_LFPS_DEGLITCH_PE1H (0x3<<14) //15:14 ++#define RG_SSUSB_LFPS_DEGLITCH_U3 (0x3<<12) //13:12 ++#define RG_SSUSB_CDR_KVSEL_PE2D (0x1<<11) //11:11 ++#define RG_SSUSB_CDR_KVSEL_PE2H (0x1<<10) //10:10 ++#define RG_SSUSB_CDR_KVSEL_PE1D (0x1<<9) //9:9 ++#define RG_SSUSB_CDR_KVSEL_PE1H (0x1<<8) //8:8 ++#define RG_SSUSB_CDR_KVSEL_U3 (0x1<<7) //7:7 ++#define RG_SSUSB_CDR_FBDIV_PE2D (0x7f<<0) //6:0 ++ ++//U3D_reg33 ++#define RG_SSUSB_RX_CMPWD_PE2D (0x1<<26) //26:26 ++#define RG_SSUSB_RX_CMPWD_PE2H (0x1<<25) //25:25 ++#define RG_SSUSB_RX_CMPWD_PE1D (0x1<<24) //24:24 ++#define RG_SSUSB_RX_CMPWD_PE1H (0x1<<23) //23:23 ++#define RG_SSUSB_RX_CMPWD_U3 (0x1<<16) //16:16 ++#define RG_SSUSB_EQ_RSTEP2_PE2D (0x3<<8) //9:8 ++#define RG_SSUSB_EQ_RSTEP2_PE2H (0x3<<6) //7:6 ++#define RG_SSUSB_EQ_RSTEP2_PE1D (0x3<<4) //5:4 ++#define RG_SSUSB_EQ_RSTEP2_PE1H (0x3<<2) //3:2 ++#define RG_SSUSB_EQ_RSTEP2_U3 (0x3<<0) //1:0 ++ ++ ++/* OFFSET */ ++ ++//U3D_reg0 ++#define RG_PCIE_SPEED_PE2D_OFST (24) ++#define RG_PCIE_SPEED_PE2H_OFST (23) ++#define RG_PCIE_SPEED_PE1D_OFST (22) ++#define RG_PCIE_SPEED_PE1H_OFST (21) ++#define RG_PCIE_SPEED_U3_OFST (20) ++#define RG_SSUSB_XTAL_EXT_EN_PE2D_OFST (18) ++#define RG_SSUSB_XTAL_EXT_EN_PE2H_OFST (16) ++#define RG_SSUSB_XTAL_EXT_EN_PE1D_OFST (14) ++#define RG_SSUSB_XTAL_EXT_EN_PE1H_OFST (12) ++#define RG_SSUSB_XTAL_EXT_EN_U3_OFST (10) ++#define RG_SSUSB_CDR_REFCK_SEL_PE2D_OFST (8) ++#define RG_SSUSB_CDR_REFCK_SEL_PE2H_OFST (6) ++#define RG_SSUSB_CDR_REFCK_SEL_PE1D_OFST (4) ++#define RG_SSUSB_CDR_REFCK_SEL_PE1H_OFST (2) ++#define RG_SSUSB_CDR_REFCK_SEL_U3_OFST (0) ++ ++//U3D_reg1 ++#define RG_USB20_REFCK_SEL_PE2D_OFST (30) ++#define RG_USB20_REFCK_SEL_PE2H_OFST (29) ++#define RG_USB20_REFCK_SEL_PE1D_OFST (28) ++#define RG_USB20_REFCK_SEL_PE1H_OFST (27) ++#define RG_USB20_REFCK_SEL_U3_OFST (26) ++#define RG_PCIE_REFCK_DIV4_PE2D_OFST (25) ++#define RG_PCIE_REFCK_DIV4_PE2H_OFST (24) ++#define RG_PCIE_REFCK_DIV4_PE1D_OFST (18) ++#define RG_PCIE_REFCK_DIV4_PE1H_OFST (17) ++#define RG_PCIE_REFCK_DIV4_U3_OFST (16) ++#define RG_PCIE_MODE_PE2D_OFST (8) ++#define RG_PCIE_MODE_PE2H_OFST (3) ++#define RG_PCIE_MODE_PE1D_OFST (2) ++#define RG_PCIE_MODE_PE1H_OFST (1) ++#define RG_PCIE_MODE_U3_OFST (0) ++ ++//U3D_reg4 ++#define RG_SSUSB_PLL_DIVEN_PE2D_OFST (22) ++#define RG_SSUSB_PLL_DIVEN_PE2H_OFST (19) ++#define RG_SSUSB_PLL_DIVEN_PE1D_OFST (16) ++#define RG_SSUSB_PLL_DIVEN_PE1H_OFST (13) ++#define RG_SSUSB_PLL_DIVEN_U3_OFST (10) ++#define RG_SSUSB_PLL_BC_PE2D_OFST (8) ++#define RG_SSUSB_PLL_BC_PE2H_OFST (6) ++#define RG_SSUSB_PLL_BC_PE1D_OFST (4) ++#define RG_SSUSB_PLL_BC_PE1H_OFST (2) ++#define RG_SSUSB_PLL_BC_U3_OFST (0) ++ ++//U3D_reg5 ++#define RG_SSUSB_PLL_BR_PE2D_OFST (27) ++#define RG_SSUSB_PLL_BR_PE2H_OFST (24) ++#define RG_SSUSB_PLL_BR_PE1D_OFST (21) ++#define RG_SSUSB_PLL_BR_PE1H_OFST (18) ++#define RG_SSUSB_PLL_BR_U3_OFST (15) ++#define RG_SSUSB_PLL_IC_PE2D_OFST (12) ++#define RG_SSUSB_PLL_IC_PE2H_OFST (9) ++#define RG_SSUSB_PLL_IC_PE1D_OFST (6) ++#define RG_SSUSB_PLL_IC_PE1H_OFST (3) ++#define RG_SSUSB_PLL_IC_U3_OFST (0) ++ ++//U3D_reg6 ++#define RG_SSUSB_PLL_IR_PE2D_OFST (24) ++#define RG_SSUSB_PLL_IR_PE2H_OFST (16) ++#define RG_SSUSB_PLL_IR_PE1D_OFST (8) ++#define RG_SSUSB_PLL_IR_PE1H_OFST (4) ++#define RG_SSUSB_PLL_IR_U3_OFST (0) ++ ++//U3D_reg7 ++#define RG_SSUSB_PLL_BP_PE2D_OFST (24) ++#define RG_SSUSB_PLL_BP_PE2H_OFST (16) ++#define RG_SSUSB_PLL_BP_PE1D_OFST (8) ++#define RG_SSUSB_PLL_BP_PE1H_OFST (4) ++#define RG_SSUSB_PLL_BP_U3_OFST (0) ++ ++//U3D_reg8 ++#define RG_SSUSB_PLL_FBKSEL_PE2D_OFST (24) ++#define RG_SSUSB_PLL_FBKSEL_PE2H_OFST (16) ++#define RG_SSUSB_PLL_FBKSEL_PE1D_OFST (8) ++#define RG_SSUSB_PLL_FBKSEL_PE1H_OFST (2) ++#define RG_SSUSB_PLL_FBKSEL_U3_OFST (0) ++ ++//U3D_reg9 ++#define RG_SSUSB_PLL_FBKDIV_PE2H_OFST (24) ++#define RG_SSUSB_PLL_FBKDIV_PE1D_OFST (16) ++#define RG_SSUSB_PLL_FBKDIV_PE1H_OFST (8) ++#define RG_SSUSB_PLL_FBKDIV_U3_OFST (0) ++ ++//U3D_reg10 ++#define RG_SSUSB_PLL_PREDIV_PE2D_OFST (26) ++#define RG_SSUSB_PLL_PREDIV_PE2H_OFST (24) ++#define RG_SSUSB_PLL_PREDIV_PE1D_OFST (18) ++#define RG_SSUSB_PLL_PREDIV_PE1H_OFST (16) ++#define RG_SSUSB_PLL_PREDIV_U3_OFST (8) ++#define RG_SSUSB_PLL_FBKDIV_PE2D_OFST (0) ++ ++//U3D_reg12 ++#define RG_SSUSB_PLL_PCW_NCPO_U3_OFST (0) ++ ++//U3D_reg13 ++#define RG_SSUSB_PLL_PCW_NCPO_PE1H_OFST (0) ++ ++//U3D_reg14 ++#define RG_SSUSB_PLL_PCW_NCPO_PE1D_OFST (0) ++ ++//U3D_reg15 ++#define RG_SSUSB_PLL_PCW_NCPO_PE2H_OFST (0) ++ ++//U3D_reg16 ++#define RG_SSUSB_PLL_PCW_NCPO_PE2D_OFST (0) ++ ++//U3D_reg19 ++#define RG_SSUSB_PLL_SSC_DELTA1_PE1H_OFST (16) ++#define RG_SSUSB_PLL_SSC_DELTA1_U3_OFST (0) ++ ++//U3D_reg20 ++#define RG_SSUSB_PLL_SSC_DELTA1_PE2H_OFST (16) ++#define RG_SSUSB_PLL_SSC_DELTA1_PE1D_OFST (0) ++ ++//U3D_reg21 ++#define RG_SSUSB_PLL_SSC_DELTA_U3_OFST (16) ++#define RG_SSUSB_PLL_SSC_DELTA1_PE2D_OFST (0) ++ ++//U3D_reg23 ++#define RG_SSUSB_PLL_SSC_DELTA_PE1D_OFST (16) ++#define RG_SSUSB_PLL_SSC_DELTA_PE1H_OFST (0) ++ ++//U3D_reg25 ++#define RG_SSUSB_PLL_SSC_DELTA_PE2D_OFST (16) ++#define RG_SSUSB_PLL_SSC_DELTA_PE2H_OFST (0) ++ ++//U3D_reg26 ++#define RG_SSUSB_PLL_REFCKDIV_PE2D_OFST (25) ++#define RG_SSUSB_PLL_REFCKDIV_PE2H_OFST (24) ++#define RG_SSUSB_PLL_REFCKDIV_PE1D_OFST (16) ++#define RG_SSUSB_PLL_REFCKDIV_PE1H_OFST (8) ++#define RG_SSUSB_PLL_REFCKDIV_U3_OFST (0) ++ ++//U3D_reg28 ++#define RG_SSUSB_CDR_BPA_PE2D_OFST (24) ++#define RG_SSUSB_CDR_BPA_PE2H_OFST (16) ++#define RG_SSUSB_CDR_BPA_PE1D_OFST (10) ++#define RG_SSUSB_CDR_BPA_PE1H_OFST (8) ++#define RG_SSUSB_CDR_BPA_U3_OFST (0) ++ ++//U3D_reg29 ++#define RG_SSUSB_CDR_BPB_PE2D_OFST (24) ++#define RG_SSUSB_CDR_BPB_PE2H_OFST (16) ++#define RG_SSUSB_CDR_BPB_PE1D_OFST (6) ++#define RG_SSUSB_CDR_BPB_PE1H_OFST (3) ++#define RG_SSUSB_CDR_BPB_U3_OFST (0) ++ ++//U3D_reg30 ++#define RG_SSUSB_CDR_BR_PE2D_OFST (24) ++#define RG_SSUSB_CDR_BR_PE2H_OFST (16) ++#define RG_SSUSB_CDR_BR_PE1D_OFST (6) ++#define RG_SSUSB_CDR_BR_PE1H_OFST (3) ++#define RG_SSUSB_CDR_BR_U3_OFST (0) ++ ++//U3D_reg31 ++#define RG_SSUSB_CDR_FBDIV_PE2H_OFST (24) ++#define RG_SSUSB_CDR_FBDIV_PE1D_OFST (16) ++#define RG_SSUSB_CDR_FBDIV_PE1H_OFST (8) ++#define RG_SSUSB_CDR_FBDIV_U3_OFST (0) ++ ++//U3D_reg32 ++#define RG_SSUSB_EQ_RSTEP1_PE2D_OFST (30) ++#define RG_SSUSB_EQ_RSTEP1_PE2H_OFST (28) ++#define RG_SSUSB_EQ_RSTEP1_PE1D_OFST (26) ++#define RG_SSUSB_EQ_RSTEP1_PE1H_OFST (24) ++#define RG_SSUSB_EQ_RSTEP1_U3_OFST (22) ++#define RG_SSUSB_LFPS_DEGLITCH_PE2D_OFST (20) ++#define RG_SSUSB_LFPS_DEGLITCH_PE2H_OFST (18) ++#define RG_SSUSB_LFPS_DEGLITCH_PE1D_OFST (16) ++#define RG_SSUSB_LFPS_DEGLITCH_PE1H_OFST (14) ++#define RG_SSUSB_LFPS_DEGLITCH_U3_OFST (12) ++#define RG_SSUSB_CDR_KVSEL_PE2D_OFST (11) ++#define RG_SSUSB_CDR_KVSEL_PE2H_OFST (10) ++#define RG_SSUSB_CDR_KVSEL_PE1D_OFST (9) ++#define RG_SSUSB_CDR_KVSEL_PE1H_OFST (8) ++#define RG_SSUSB_CDR_KVSEL_U3_OFST (7) ++#define RG_SSUSB_CDR_FBDIV_PE2D_OFST (0) ++ ++//U3D_reg33 ++#define RG_SSUSB_RX_CMPWD_PE2D_OFST (26) ++#define RG_SSUSB_RX_CMPWD_PE2H_OFST (25) ++#define RG_SSUSB_RX_CMPWD_PE1D_OFST (24) ++#define RG_SSUSB_RX_CMPWD_PE1H_OFST (23) ++#define RG_SSUSB_RX_CMPWD_U3_OFST (16) ++#define RG_SSUSB_EQ_RSTEP2_PE2D_OFST (8) ++#define RG_SSUSB_EQ_RSTEP2_PE2H_OFST (6) ++#define RG_SSUSB_EQ_RSTEP2_PE1D_OFST (4) ++#define RG_SSUSB_EQ_RSTEP2_PE1H_OFST (2) ++#define RG_SSUSB_EQ_RSTEP2_U3_OFST (0) ++ ++ ++/////////////////////////////////////////////////////////////////////////////// ++ ++struct u3phyd_reg { ++ //0x0 ++ PHY_LE32 phyd_mix0; ++ PHY_LE32 phyd_mix1; ++ PHY_LE32 phyd_lfps0; ++ PHY_LE32 phyd_lfps1; ++ //0x10 ++ PHY_LE32 phyd_impcal0; ++ PHY_LE32 phyd_impcal1; ++ PHY_LE32 phyd_txpll0; ++ PHY_LE32 phyd_txpll1; ++ //0x20 ++ PHY_LE32 phyd_txpll2; ++ PHY_LE32 phyd_fl0; ++ PHY_LE32 phyd_mix2; ++ PHY_LE32 phyd_rx0; ++ //0x30 ++ PHY_LE32 phyd_t2rlb; ++ PHY_LE32 phyd_cppat; ++ PHY_LE32 phyd_mix3; ++ PHY_LE32 phyd_ebufctl; ++ //0x40 ++ PHY_LE32 phyd_pipe0; ++ PHY_LE32 phyd_pipe1; ++ PHY_LE32 phyd_mix4; ++ PHY_LE32 phyd_ckgen0; ++ //0x50 ++ PHY_LE32 phyd_mix5; ++ PHY_LE32 phyd_reserved; ++ PHY_LE32 phyd_cdr0; ++ PHY_LE32 phyd_cdr1; ++ //0x60 ++ PHY_LE32 phyd_pll_0; ++ PHY_LE32 phyd_pll_1; ++ PHY_LE32 phyd_bcn_det_1; ++ PHY_LE32 phyd_bcn_det_2; ++ //0x70 ++ PHY_LE32 eq0; ++ PHY_LE32 eq1; ++ PHY_LE32 eq2; ++ PHY_LE32 eq3; ++ //0x80 ++ PHY_LE32 eq_eye0; ++ PHY_LE32 eq_eye1; ++ PHY_LE32 eq_eye2; ++ PHY_LE32 eq_dfe0; ++ //0x90 ++ PHY_LE32 eq_dfe1; ++ PHY_LE32 eq_dfe2; ++ PHY_LE32 eq_dfe3; ++ PHY_LE32 reserve0; ++ //0xa0 ++ PHY_LE32 phyd_mon0; ++ PHY_LE32 phyd_mon1; ++ PHY_LE32 phyd_mon2; ++ PHY_LE32 phyd_mon3; ++ //0xb0 ++ PHY_LE32 phyd_mon4; ++ PHY_LE32 phyd_mon5; ++ PHY_LE32 phyd_mon6; ++ PHY_LE32 phyd_mon7; ++ //0xc0 ++ PHY_LE32 phya_rx_mon0; ++ PHY_LE32 phya_rx_mon1; ++ PHY_LE32 phya_rx_mon2; ++ PHY_LE32 phya_rx_mon3; ++ //0xd0 ++ PHY_LE32 phya_rx_mon4; ++ PHY_LE32 phya_rx_mon5; ++ PHY_LE32 phyd_cppat2; ++ PHY_LE32 eq_eye3; ++ //0xe0 ++ PHY_LE32 kband_out; ++ PHY_LE32 kband_out1; ++}; ++ ++//U3D_PHYD_MIX0 ++#define RG_SSUSB_P_P3_TX_NG (0x1<<31) //31:31 ++#define RG_SSUSB_TSEQ_EN (0x1<<30) //30:30 ++#define RG_SSUSB_TSEQ_POLEN (0x1<<29) //29:29 ++#define RG_SSUSB_TSEQ_POL (0x1<<28) //28:28 ++#define RG_SSUSB_P_P3_PCLK_NG (0x1<<27) //27:27 ++#define RG_SSUSB_TSEQ_TH (0x7<<24) //26:24 ++#define RG_SSUSB_PRBS_BERTH (0xff<<16) //23:16 ++#define RG_SSUSB_DISABLE_PHY_U2_ON (0x1<<15) //15:15 ++#define RG_SSUSB_DISABLE_PHY_U2_OFF (0x1<<14) //14:14 ++#define RG_SSUSB_PRBS_EN (0x1<<13) //13:13 ++#define RG_SSUSB_BPSLOCK (0x1<<12) //12:12 ++#define RG_SSUSB_RTCOMCNT (0xf<<8) //11:8 ++#define RG_SSUSB_COMCNT (0xf<<4) //7:4 ++#define RG_SSUSB_PRBSEL_CALIB (0xf<<0) //3:0 ++ ++//U3D_PHYD_MIX1 ++#define RG_SSUSB_SLEEP_EN (0x1<<31) //31:31 ++#define RG_SSUSB_PRBSEL_PCS (0x7<<28) //30:28 ++#define RG_SSUSB_TXLFPS_PRD (0xf<<24) //27:24 ++#define RG_SSUSB_P_RX_P0S_CK (0x1<<23) //23:23 ++#define RG_SSUSB_P_TX_P0S_CK (0x1<<22) //22:22 ++#define RG_SSUSB_PDNCTL (0x3f<<16) //21:16 ++#define RG_SSUSB_TX_DRV_EN (0x1<<15) //15:15 ++#define RG_SSUSB_TX_DRV_SEL (0x1<<14) //14:14 ++#define RG_SSUSB_TX_DRV_DLY (0x3f<<8) //13:8 ++#define RG_SSUSB_BERT_EN (0x1<<7) //7:7 ++#define RG_SSUSB_SCP_TH (0x7<<4) //6:4 ++#define RG_SSUSB_SCP_EN (0x1<<3) //3:3 ++#define RG_SSUSB_RXANSIDEC_TEST (0x7<<0) //2:0 ++ ++//U3D_PHYD_LFPS0 ++#define RG_SSUSB_LFPS_PWD (0x1<<30) //30:30 ++#define RG_SSUSB_FORCE_LFPS_PWD (0x1<<29) //29:29 ++#define RG_SSUSB_RXLFPS_OVF (0x1f<<24) //28:24 ++#define RG_SSUSB_P3_ENTRY_SEL (0x1<<23) //23:23 ++#define RG_SSUSB_P3_ENTRY (0x1<<22) //22:22 ++#define RG_SSUSB_RXLFPS_CDRSEL (0x3<<20) //21:20 ++#define RG_SSUSB_RXLFPS_CDRTH (0xf<<16) //19:16 ++#define RG_SSUSB_LOCK5G_BLOCK (0x1<<15) //15:15 ++#define RG_SSUSB_TFIFO_EXT_D_SEL (0x1<<14) //14:14 ++#define RG_SSUSB_TFIFO_NO_EXTEND (0x1<<13) //13:13 ++#define RG_SSUSB_RXLFPS_LOB (0x1f<<8) //12:8 ++#define RG_SSUSB_TXLFPS_EN (0x1<<7) //7:7 ++#define RG_SSUSB_TXLFPS_SEL (0x1<<6) //6:6 ++#define RG_SSUSB_RXLFPS_CDRLOCK (0x1<<5) //5:5 ++#define RG_SSUSB_RXLFPS_UPB (0x1f<<0) //4:0 ++ ++//U3D_PHYD_LFPS1 ++#define RG_SSUSB_RX_IMP_BIAS (0xf<<28) //31:28 ++#define RG_SSUSB_TX_IMP_BIAS (0xf<<24) //27:24 ++#define RG_SSUSB_FWAKE_TH (0x3f<<16) //21:16 ++#define RG_SSUSB_RXLFPS_UDF (0x1f<<8) //12:8 ++#define RG_SSUSB_RXLFPS_P0IDLETH (0xff<<0) //7:0 ++ ++//U3D_PHYD_IMPCAL0 ++#define RG_SSUSB_FORCE_TX_IMPSEL (0x1<<31) //31:31 ++#define RG_SSUSB_TX_IMPCAL_EN (0x1<<30) //30:30 ++#define RG_SSUSB_FORCE_TX_IMPCAL_EN (0x1<<29) //29:29 ++#define RG_SSUSB_TX_IMPSEL (0x1f<<24) //28:24 ++#define RG_SSUSB_TX_IMPCAL_CALCYC (0x3f<<16) //21:16 ++#define RG_SSUSB_TX_IMPCAL_STBCYC (0x1f<<10) //14:10 ++#define RG_SSUSB_TX_IMPCAL_CYCCNT (0x3ff<<0) //9:0 ++ ++//U3D_PHYD_IMPCAL1 ++#define RG_SSUSB_FORCE_RX_IMPSEL (0x1<<31) //31:31 ++#define RG_SSUSB_RX_IMPCAL_EN (0x1<<30) //30:30 ++#define RG_SSUSB_FORCE_RX_IMPCAL_EN (0x1<<29) //29:29 ++#define RG_SSUSB_RX_IMPSEL (0x1f<<24) //28:24 ++#define RG_SSUSB_RX_IMPCAL_CALCYC (0x3f<<16) //21:16 ++#define RG_SSUSB_RX_IMPCAL_STBCYC (0x1f<<10) //14:10 ++#define RG_SSUSB_RX_IMPCAL_CYCCNT (0x3ff<<0) //9:0 ++ ++//U3D_PHYD_TXPLL0 ++#define RG_SSUSB_TXPLL_DDSEN_CYC (0x1f<<27) //31:27 ++#define RG_SSUSB_TXPLL_ON (0x1<<26) //26:26 ++#define RG_SSUSB_FORCE_TXPLLON (0x1<<25) //25:25 ++#define RG_SSUSB_TXPLL_STBCYC (0x1ff<<16) //24:16 ++#define RG_SSUSB_TXPLL_NCPOCHG_CYC (0xf<<12) //15:12 ++#define RG_SSUSB_TXPLL_NCPOEN_CYC (0x3<<10) //11:10 ++#define RG_SSUSB_TXPLL_DDSRSTB_CYC (0x7<<0) //2:0 ++ ++//U3D_PHYD_TXPLL1 ++#define RG_SSUSB_PLL_NCPO_EN (0x1<<31) //31:31 ++#define RG_SSUSB_PLL_FIFO_START_MAN (0x1<<30) //30:30 ++#define RG_SSUSB_PLL_NCPO_CHG (0x1<<28) //28:28 ++#define RG_SSUSB_PLL_DDS_RSTB (0x1<<27) //27:27 ++#define RG_SSUSB_PLL_DDS_PWDB (0x1<<26) //26:26 ++#define RG_SSUSB_PLL_DDSEN (0x1<<25) //25:25 ++#define RG_SSUSB_PLL_AUTOK_VCO (0x1<<24) //24:24 ++#define RG_SSUSB_PLL_PWD (0x1<<23) //23:23 ++#define RG_SSUSB_RX_AFE_PWD (0x1<<22) //22:22 ++#define RG_SSUSB_PLL_TCADJ (0x3f<<16) //21:16 ++#define RG_SSUSB_FORCE_CDR_TCADJ (0x1<<15) //15:15 ++#define RG_SSUSB_FORCE_CDR_AUTOK_VCO (0x1<<14) //14:14 ++#define RG_SSUSB_FORCE_CDR_PWD (0x1<<13) //13:13 ++#define RG_SSUSB_FORCE_PLL_NCPO_EN (0x1<<12) //12:12 ++#define RG_SSUSB_FORCE_PLL_FIFO_START_MAN (0x1<<11) //11:11 ++#define RG_SSUSB_FORCE_PLL_NCPO_CHG (0x1<<9) //9:9 ++#define RG_SSUSB_FORCE_PLL_DDS_RSTB (0x1<<8) //8:8 ++#define RG_SSUSB_FORCE_PLL_DDS_PWDB (0x1<<7) //7:7 ++#define RG_SSUSB_FORCE_PLL_DDSEN (0x1<<6) //6:6 ++#define RG_SSUSB_FORCE_PLL_TCADJ (0x1<<5) //5:5 ++#define RG_SSUSB_FORCE_PLL_AUTOK_VCO (0x1<<4) //4:4 ++#define RG_SSUSB_FORCE_PLL_PWD (0x1<<3) //3:3 ++#define RG_SSUSB_FLT_1_DISPERR_B (0x1<<2) //2:2 ++ ++//U3D_PHYD_TXPLL2 ++#define RG_SSUSB_TX_LFPS_EN (0x1<<31) //31:31 ++#define RG_SSUSB_FORCE_TX_LFPS_EN (0x1<<30) //30:30 ++#define RG_SSUSB_TX_LFPS (0x1<<29) //29:29 ++#define RG_SSUSB_FORCE_TX_LFPS (0x1<<28) //28:28 ++#define RG_SSUSB_RXPLL_STB (0x1<<27) //27:27 ++#define RG_SSUSB_TXPLL_STB (0x1<<26) //26:26 ++#define RG_SSUSB_FORCE_RXPLL_STB (0x1<<25) //25:25 ++#define RG_SSUSB_FORCE_TXPLL_STB (0x1<<24) //24:24 ++#define RG_SSUSB_RXPLL_REFCKSEL (0x1<<16) //16:16 ++#define RG_SSUSB_RXPLL_STBMODE (0x1<<11) //11:11 ++#define RG_SSUSB_RXPLL_ON (0x1<<10) //10:10 ++#define RG_SSUSB_FORCE_RXPLLON (0x1<<9) //9:9 ++#define RG_SSUSB_FORCE_RX_AFE_PWD (0x1<<8) //8:8 ++#define RG_SSUSB_CDR_AUTOK_VCO (0x1<<7) //7:7 ++#define RG_SSUSB_CDR_PWD (0x1<<6) //6:6 ++#define RG_SSUSB_CDR_TCADJ (0x3f<<0) //5:0 ++ ++//U3D_PHYD_FL0 ++#define RG_SSUSB_RX_FL_TARGET (0xffff<<16) //31:16 ++#define RG_SSUSB_RX_FL_CYCLECNT (0xffff<<0) //15:0 ++ ++//U3D_PHYD_MIX2 ++#define RG_SSUSB_RX_EQ_RST (0x1<<31) //31:31 ++#define RG_SSUSB_RX_EQ_RST_SEL (0x1<<30) //30:30 ++#define RG_SSUSB_RXVAL_RST (0x1<<29) //29:29 ++#define RG_SSUSB_RXVAL_CNT (0x1f<<24) //28:24 ++#define RG_SSUSB_CDROS_EN (0x1<<18) //18:18 ++#define RG_SSUSB_CDR_LCKOP (0x3<<16) //17:16 ++#define RG_SSUSB_RX_FL_LOCKTH (0xf<<8) //11:8 ++#define RG_SSUSB_RX_FL_OFFSET (0xff<<0) //7:0 ++ ++//U3D_PHYD_RX0 ++#define RG_SSUSB_T2RLB_BERTH (0xff<<24) //31:24 ++#define RG_SSUSB_T2RLB_PAT (0xff<<16) //23:16 ++#define RG_SSUSB_T2RLB_EN (0x1<<15) //15:15 ++#define RG_SSUSB_T2RLB_BPSCRAMB (0x1<<14) //14:14 ++#define RG_SSUSB_T2RLB_SERIAL (0x1<<13) //13:13 ++#define RG_SSUSB_T2RLB_MODE (0x3<<11) //12:11 ++#define RG_SSUSB_RX_SAOSC_EN (0x1<<10) //10:10 ++#define RG_SSUSB_RX_SAOSC_EN_SEL (0x1<<9) //9:9 ++#define RG_SSUSB_RX_DFE_OPTION (0x1<<8) //8:8 ++#define RG_SSUSB_RX_DFE_EN (0x1<<7) //7:7 ++#define RG_SSUSB_RX_DFE_EN_SEL (0x1<<6) //6:6 ++#define RG_SSUSB_RX_EQ_EN (0x1<<5) //5:5 ++#define RG_SSUSB_RX_EQ_EN_SEL (0x1<<4) //4:4 ++#define RG_SSUSB_RX_SAOSC_RST (0x1<<3) //3:3 ++#define RG_SSUSB_RX_SAOSC_RST_SEL (0x1<<2) //2:2 ++#define RG_SSUSB_RX_DFE_RST (0x1<<1) //1:1 ++#define RG_SSUSB_RX_DFE_RST_SEL (0x1<<0) //0:0 ++ ++//U3D_PHYD_T2RLB ++#define RG_SSUSB_EQTRAIN_CH_MODE (0x1<<28) //28:28 ++#define RG_SSUSB_PRB_OUT_CPPAT (0x1<<27) //27:27 ++#define RG_SSUSB_BPANSIENC (0x1<<26) //26:26 ++#define RG_SSUSB_VALID_EN (0x1<<25) //25:25 ++#define RG_SSUSB_EBUF_SRST (0x1<<24) //24:24 ++#define RG_SSUSB_K_EMP (0xf<<20) //23:20 ++#define RG_SSUSB_K_FUL (0xf<<16) //19:16 ++#define RG_SSUSB_T2RLB_BDATRST (0xf<<12) //15:12 ++#define RG_SSUSB_P_T2RLB_SKP_EN (0x1<<10) //10:10 ++#define RG_SSUSB_T2RLB_PATMODE (0x3<<8) //9:8 ++#define RG_SSUSB_T2RLB_TSEQCNT (0xff<<0) //7:0 ++ ++//U3D_PHYD_CPPAT ++#define RG_SSUSB_CPPAT_PROGRAM_EN (0x1<<24) //24:24 ++#define RG_SSUSB_CPPAT_TOZ (0x3<<21) //22:21 ++#define RG_SSUSB_CPPAT_PRBS_EN (0x1<<20) //20:20 ++#define RG_SSUSB_CPPAT_OUT_TMP2 (0xf<<16) //19:16 ++#define RG_SSUSB_CPPAT_OUT_TMP1 (0xff<<8) //15:8 ++#define RG_SSUSB_CPPAT_OUT_TMP0 (0xff<<0) //7:0 ++ ++//U3D_PHYD_MIX3 ++#define RG_SSUSB_CDR_TCADJ_MINUS (0x1<<31) //31:31 ++#define RG_SSUSB_P_CDROS_EN (0x1<<30) //30:30 ++#define RG_SSUSB_P_P2_TX_DRV_DIS (0x1<<28) //28:28 ++#define RG_SSUSB_CDR_TCADJ_OFFSET (0x7<<24) //26:24 ++#define RG_SSUSB_PLL_TCADJ_MINUS (0x1<<23) //23:23 ++#define RG_SSUSB_FORCE_PLL_BIAS_LPF_EN (0x1<<20) //20:20 ++#define RG_SSUSB_PLL_BIAS_LPF_EN (0x1<<19) //19:19 ++#define RG_SSUSB_PLL_TCADJ_OFFSET (0x7<<16) //18:16 ++#define RG_SSUSB_FORCE_PLL_SSCEN (0x1<<15) //15:15 ++#define RG_SSUSB_PLL_SSCEN (0x1<<14) //14:14 ++#define RG_SSUSB_FORCE_CDR_PI_PWD (0x1<<13) //13:13 ++#define RG_SSUSB_CDR_PI_PWD (0x1<<12) //12:12 ++#define RG_SSUSB_CDR_PI_MODE (0x1<<11) //11:11 ++#define RG_SSUSB_TXPLL_SSCEN_CYC (0x3ff<<0) //9:0 ++ ++//U3D_PHYD_EBUFCTL ++#define RG_SSUSB_EBUFCTL (0xffffffff<<0) //31:0 ++ ++//U3D_PHYD_PIPE0 ++#define RG_SSUSB_RXTERMINATION (0x1<<30) //30:30 ++#define RG_SSUSB_RXEQTRAINING (0x1<<29) //29:29 ++#define RG_SSUSB_RXPOLARITY (0x1<<28) //28:28 ++#define RG_SSUSB_TXDEEMPH (0x3<<26) //27:26 ++#define RG_SSUSB_POWERDOWN (0x3<<24) //25:24 ++#define RG_SSUSB_TXONESZEROS (0x1<<23) //23:23 ++#define RG_SSUSB_TXELECIDLE (0x1<<22) //22:22 ++#define RG_SSUSB_TXDETECTRX (0x1<<21) //21:21 ++#define RG_SSUSB_PIPE_SEL (0x1<<20) //20:20 ++#define RG_SSUSB_TXDATAK (0xf<<16) //19:16 ++#define RG_SSUSB_CDR_STABLE_SEL (0x1<<15) //15:15 ++#define RG_SSUSB_CDR_STABLE (0x1<<14) //14:14 ++#define RG_SSUSB_CDR_RSTB_SEL (0x1<<13) //13:13 ++#define RG_SSUSB_CDR_RSTB (0x1<<12) //12:12 ++#define RG_SSUSB_P_ERROR_SEL (0x3<<4) //5:4 ++#define RG_SSUSB_TXMARGIN (0x7<<1) //3:1 ++#define RG_SSUSB_TXCOMPLIANCE (0x1<<0) //0:0 ++ ++//U3D_PHYD_PIPE1 ++#define RG_SSUSB_TXDATA (0xffffffff<<0) //31:0 ++ ++//U3D_PHYD_MIX4 ++#define RG_SSUSB_CDROS_CNT (0x3f<<24) //29:24 ++#define RG_SSUSB_T2RLB_BER_EN (0x1<<16) //16:16 ++#define RG_SSUSB_T2RLB_BER_RATE (0xffff<<0) //15:0 ++ ++//U3D_PHYD_CKGEN0 ++#define RG_SSUSB_RFIFO_IMPLAT (0x1<<27) //27:27 ++#define RG_SSUSB_TFIFO_PSEL (0x7<<24) //26:24 ++#define RG_SSUSB_CKGEN_PSEL (0x3<<8) //9:8 ++#define RG_SSUSB_RXCK_INV (0x1<<0) //0:0 ++ ++//U3D_PHYD_MIX5 ++#define RG_SSUSB_PRB_SEL (0xffff<<16) //31:16 ++#define RG_SSUSB_RXPLL_STBCYC (0x7ff<<0) //10:0 ++ ++//U3D_PHYD_RESERVED ++#define RG_SSUSB_PHYD_RESERVE (0xffffffff<<0) //31:0 ++//#define RG_SSUSB_RX_SIGDET_SEL (0x1<<11) ++//#define RG_SSUSB_RX_SIGDET_EN (0x1<<12) ++//#define RG_SSUSB_RX_PI_CAL_MANUAL_SEL (0x1<<9) ++//#define RG_SSUSB_RX_PI_CAL_MANUAL_EN (0x1<<10) ++ ++//U3D_PHYD_CDR0 ++#define RG_SSUSB_CDR_BIC_LTR (0xf<<28) //31:28 ++#define RG_SSUSB_CDR_BIC_LTD0 (0xf<<24) //27:24 ++#define RG_SSUSB_CDR_BC_LTD1 (0x1f<<16) //20:16 ++#define RG_SSUSB_CDR_BC_LTR (0x1f<<8) //12:8 ++#define RG_SSUSB_CDR_BC_LTD0 (0x1f<<0) //4:0 ++ ++//U3D_PHYD_CDR1 ++#define RG_SSUSB_CDR_BIR_LTD1 (0x1f<<24) //28:24 ++#define RG_SSUSB_CDR_BIR_LTR (0x1f<<16) //20:16 ++#define RG_SSUSB_CDR_BIR_LTD0 (0x1f<<8) //12:8 ++#define RG_SSUSB_CDR_BW_SEL (0x3<<6) //7:6 ++#define RG_SSUSB_CDR_BIC_LTD1 (0xf<<0) //3:0 ++ ++//U3D_PHYD_PLL_0 ++#define RG_SSUSB_FORCE_CDR_BAND_5G (0x1<<28) //28:28 ++#define RG_SSUSB_FORCE_CDR_BAND_2P5G (0x1<<27) //27:27 ++#define RG_SSUSB_FORCE_PLL_BAND_5G (0x1<<26) //26:26 ++#define RG_SSUSB_FORCE_PLL_BAND_2P5G (0x1<<25) //25:25 ++#define RG_SSUSB_P_EQ_T_SEL (0x3ff<<15) //24:15 ++#define RG_SSUSB_PLL_ISO_EN_CYC (0x3ff<<5) //14:5 ++#define RG_SSUSB_PLLBAND_RECAL (0x1<<4) //4:4 ++#define RG_SSUSB_PLL_DDS_ISO_EN (0x1<<3) //3:3 ++#define RG_SSUSB_FORCE_PLL_DDS_ISO_EN (0x1<<2) //2:2 ++#define RG_SSUSB_PLL_DDS_PWR_ON (0x1<<1) //1:1 ++#define RG_SSUSB_FORCE_PLL_DDS_PWR_ON (0x1<<0) //0:0 ++ ++//U3D_PHYD_PLL_1 ++#define RG_SSUSB_CDR_BAND_5G (0xff<<24) //31:24 ++#define RG_SSUSB_CDR_BAND_2P5G (0xff<<16) //23:16 ++#define RG_SSUSB_PLL_BAND_5G (0xff<<8) //15:8 ++#define RG_SSUSB_PLL_BAND_2P5G (0xff<<0) //7:0 ++ ++//U3D_PHYD_BCN_DET_1 ++#define RG_SSUSB_P_BCN_OBS_PRD (0xffff<<16) //31:16 ++#define RG_SSUSB_U_BCN_OBS_PRD (0xffff<<0) //15:0 ++ ++//U3D_PHYD_BCN_DET_2 ++#define RG_SSUSB_P_BCN_OBS_SEL (0xfff<<16) //27:16 ++#define RG_SSUSB_BCN_DET_DIS (0x1<<12) //12:12 ++#define RG_SSUSB_U_BCN_OBS_SEL (0xfff<<0) //11:0 ++ ++//U3D_EQ0 ++#define RG_SSUSB_EQ_DLHL_LFI (0x7f<<24) //30:24 ++#define RG_SSUSB_EQ_DHHL_LFI (0x7f<<16) //22:16 ++#define RG_SSUSB_EQ_DD0HOS_LFI (0x7f<<8) //14:8 ++#define RG_SSUSB_EQ_DD0LOS_LFI (0x7f<<0) //6:0 ++ ++//U3D_EQ1 ++#define RG_SSUSB_EQ_DD1HOS_LFI (0x7f<<24) //30:24 ++#define RG_SSUSB_EQ_DD1LOS_LFI (0x7f<<16) //22:16 ++#define RG_SSUSB_EQ_DE0OS_LFI (0x7f<<8) //14:8 ++#define RG_SSUSB_EQ_DE1OS_LFI (0x7f<<0) //6:0 ++ ++//U3D_EQ2 ++#define RG_SSUSB_EQ_DLHLOS_LFI (0x7f<<24) //30:24 ++#define RG_SSUSB_EQ_DHHLOS_LFI (0x7f<<16) //22:16 ++#define RG_SSUSB_EQ_STOPTIME (0x1<<14) //14:14 ++#define RG_SSUSB_EQ_DHHL_LF_SEL (0x7<<11) //13:11 ++#define RG_SSUSB_EQ_DSAOS_LF_SEL (0x7<<8) //10:8 ++#define RG_SSUSB_EQ_STARTTIME (0x3<<6) //7:6 ++#define RG_SSUSB_EQ_DLEQ_LF_SEL (0x7<<3) //5:3 ++#define RG_SSUSB_EQ_DLHL_LF_SEL (0x7<<0) //2:0 ++ ++//U3D_EQ3 ++#define RG_SSUSB_EQ_DLEQ_LFI_GEN2 (0xf<<28) //31:28 ++#define RG_SSUSB_EQ_DLEQ_LFI_GEN1 (0xf<<24) //27:24 ++#define RG_SSUSB_EQ_DEYE0OS_LFI (0x7f<<16) //22:16 ++#define RG_SSUSB_EQ_DEYE1OS_LFI (0x7f<<8) //14:8 ++#define RG_SSUSB_EQ_TRI_DET_EN (0x1<<7) //7:7 ++#define RG_SSUSB_EQ_TRI_DET_TH (0x7f<<0) //6:0 ++ ++//U3D_EQ_EYE0 ++#define RG_SSUSB_EQ_EYE_XOFFSET (0x7f<<25) //31:25 ++#define RG_SSUSB_EQ_EYE_MON_EN (0x1<<24) //24:24 ++#define RG_SSUSB_EQ_EYE0_Y (0x7f<<16) //22:16 ++#define RG_SSUSB_EQ_EYE1_Y (0x7f<<8) //14:8 ++#define RG_SSUSB_EQ_PILPO_ROUT (0x1<<7) //7:7 ++#define RG_SSUSB_EQ_PI_KPGAIN (0x7<<4) //6:4 ++#define RG_SSUSB_EQ_EYE_CNT_EN (0x1<<3) //3:3 ++ ++//U3D_EQ_EYE1 ++#define RG_SSUSB_EQ_SIGDET (0x7f<<24) //30:24 ++#define RG_SSUSB_EQ_EYE_MASK (0x3ff<<7) //16:7 ++ ++//U3D_EQ_EYE2 ++#define RG_SSUSB_EQ_RX500M_CK_SEL (0x1<<31) //31:31 ++#define RG_SSUSB_EQ_SD_CNT1 (0x3f<<24) //29:24 ++#define RG_SSUSB_EQ_ISIFLAG_SEL (0x3<<22) //23:22 ++#define RG_SSUSB_EQ_SD_CNT0 (0x3f<<16) //21:16 ++ ++//U3D_EQ_DFE0 ++#define RG_SSUSB_EQ_LEQMAX (0xf<<28) //31:28 ++#define RG_SSUSB_EQ_DFEX_EN (0x1<<27) //27:27 ++#define RG_SSUSB_EQ_DFEX_LF_SEL (0x7<<24) //26:24 ++#define RG_SSUSB_EQ_CHK_EYE_H (0x1<<23) //23:23 ++#define RG_SSUSB_EQ_PIEYE_INI (0x7f<<16) //22:16 ++#define RG_SSUSB_EQ_PI90_INI (0x7f<<8) //14:8 ++#define RG_SSUSB_EQ_PI0_INI (0x7f<<0) //6:0 ++ ++//U3D_EQ_DFE1 ++#define RG_SSUSB_EQ_REV (0xffff<<16) //31:16 ++#define RG_SSUSB_EQ_DFEYEN_DUR (0x7<<12) //14:12 ++#define RG_SSUSB_EQ_DFEXEN_DUR (0x7<<8) //10:8 ++#define RG_SSUSB_EQ_DFEX_RST (0x1<<7) //7:7 ++#define RG_SSUSB_EQ_GATED_RXD_B (0x1<<6) //6:6 ++#define RG_SSUSB_EQ_PI90CK_SEL (0x3<<4) //5:4 ++#define RG_SSUSB_EQ_DFEX_DIS (0x1<<2) //2:2 ++#define RG_SSUSB_EQ_DFEYEN_STOP_DIS (0x1<<1) //1:1 ++#define RG_SSUSB_EQ_DFEXEN_SEL (0x1<<0) //0:0 ++ ++//U3D_EQ_DFE2 ++#define RG_SSUSB_EQ_MON_SEL (0x1f<<24) //28:24 ++#define RG_SSUSB_EQ_LEQOSC_DLYCNT (0x7<<16) //18:16 ++#define RG_SSUSB_EQ_DLEQOS_LFI (0x1f<<8) //12:8 ++#define RG_SSUSB_EQ_LEQ_STOP_TO (0x3<<0) //1:0 ++ ++//U3D_EQ_DFE3 ++#define RG_SSUSB_EQ_RESERVED (0xffffffff<<0) //31:0 ++ ++//U3D_PHYD_MON0 ++#define RGS_SSUSB_BERT_BERC (0xffff<<16) //31:16 ++#define RGS_SSUSB_LFPS (0xf<<12) //15:12 ++#define RGS_SSUSB_TRAINDEC (0x7<<8) //10:8 ++#define RGS_SSUSB_SCP_PAT (0xff<<0) //7:0 ++ ++//U3D_PHYD_MON1 ++#define RGS_SSUSB_RX_FL_OUT (0xffff<<0) //15:0 ++ ++//U3D_PHYD_MON2 ++#define RGS_SSUSB_T2RLB_ERRCNT (0xffff<<16) //31:16 ++#define RGS_SSUSB_RETRACK (0xf<<12) //15:12 ++#define RGS_SSUSB_RXPLL_LOCK (0x1<<10) //10:10 ++#define RGS_SSUSB_CDR_VCOCAL_CPLT_D (0x1<<9) //9:9 ++#define RGS_SSUSB_PLL_VCOCAL_CPLT_D (0x1<<8) //8:8 ++#define RGS_SSUSB_PDNCTL (0xff<<0) //7:0 ++ ++//U3D_PHYD_MON3 ++#define RGS_SSUSB_TSEQ_ERRCNT (0xffff<<16) //31:16 ++#define RGS_SSUSB_PRBS_ERRCNT (0xffff<<0) //15:0 ++ ++//U3D_PHYD_MON4 ++#define RGS_SSUSB_RX_LSLOCK_CNT (0xf<<24) //27:24 ++#define RGS_SSUSB_SCP_DETCNT (0xff<<16) //23:16 ++#define RGS_SSUSB_TSEQ_DETCNT (0xffff<<0) //15:0 ++ ++//U3D_PHYD_MON5 ++#define RGS_SSUSB_EBUFMSG (0xffff<<16) //31:16 ++#define RGS_SSUSB_BERT_LOCK (0x1<<15) //15:15 ++#define RGS_SSUSB_SCP_DET (0x1<<14) //14:14 ++#define RGS_SSUSB_TSEQ_DET (0x1<<13) //13:13 ++#define RGS_SSUSB_EBUF_UDF (0x1<<12) //12:12 ++#define RGS_SSUSB_EBUF_OVF (0x1<<11) //11:11 ++#define RGS_SSUSB_PRBS_PASSTH (0x1<<10) //10:10 ++#define RGS_SSUSB_PRBS_PASS (0x1<<9) //9:9 ++#define RGS_SSUSB_PRBS_LOCK (0x1<<8) //8:8 ++#define RGS_SSUSB_T2RLB_ERR (0x1<<6) //6:6 ++#define RGS_SSUSB_T2RLB_PASSTH (0x1<<5) //5:5 ++#define RGS_SSUSB_T2RLB_PASS (0x1<<4) //4:4 ++#define RGS_SSUSB_T2RLB_LOCK (0x1<<3) //3:3 ++#define RGS_SSUSB_RX_IMPCAL_DONE (0x1<<2) //2:2 ++#define RGS_SSUSB_TX_IMPCAL_DONE (0x1<<1) //1:1 ++#define RGS_SSUSB_RXDETECTED (0x1<<0) //0:0 ++ ++//U3D_PHYD_MON6 ++#define RGS_SSUSB_SIGCAL_DONE (0x1<<30) //30:30 ++#define RGS_SSUSB_SIGCAL_CAL_OUT (0x1<<29) //29:29 ++#define RGS_SSUSB_SIGCAL_OFFSET (0x1f<<24) //28:24 ++#define RGS_SSUSB_RX_IMP_SEL (0x1f<<16) //20:16 ++#define RGS_SSUSB_TX_IMP_SEL (0x1f<<8) //12:8 ++#define RGS_SSUSB_TFIFO_MSG (0xf<<4) //7:4 ++#define RGS_SSUSB_RFIFO_MSG (0xf<<0) //3:0 ++ ++//U3D_PHYD_MON7 ++#define RGS_SSUSB_FT_OUT (0xff<<8) //15:8 ++#define RGS_SSUSB_PRB_OUT (0xff<<0) //7:0 ++ ++//U3D_PHYA_RX_MON0 ++#define RGS_SSUSB_EQ_DCLEQ (0xf<<24) //27:24 ++#define RGS_SSUSB_EQ_DCD0H (0x7f<<16) //22:16 ++#define RGS_SSUSB_EQ_DCD0L (0x7f<<8) //14:8 ++#define RGS_SSUSB_EQ_DCD1H (0x7f<<0) //6:0 ++ ++//U3D_PHYA_RX_MON1 ++#define RGS_SSUSB_EQ_DCD1L (0x7f<<24) //30:24 ++#define RGS_SSUSB_EQ_DCE0 (0x7f<<16) //22:16 ++#define RGS_SSUSB_EQ_DCE1 (0x7f<<8) //14:8 ++#define RGS_SSUSB_EQ_DCHHL (0x7f<<0) //6:0 ++ ++//U3D_PHYA_RX_MON2 ++#define RGS_SSUSB_EQ_LEQ_STOP (0x1<<31) //31:31 ++#define RGS_SSUSB_EQ_DCLHL (0x7f<<24) //30:24 ++#define RGS_SSUSB_EQ_STATUS (0xff<<16) //23:16 ++#define RGS_SSUSB_EQ_DCEYE0 (0x7f<<8) //14:8 ++#define RGS_SSUSB_EQ_DCEYE1 (0x7f<<0) //6:0 ++ ++//U3D_PHYA_RX_MON3 ++#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0 (0xfffff<<0) //19:0 ++ ++//U3D_PHYA_RX_MON4 ++#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1 (0xfffff<<0) //19:0 ++ ++//U3D_PHYA_RX_MON5 ++#define RGS_SSUSB_EQ_DCLEQOS (0x1f<<8) //12:8 ++#define RGS_SSUSB_EQ_EYE_CNT_RDY (0x1<<7) //7:7 ++#define RGS_SSUSB_EQ_PILPO (0x7f<<0) //6:0 ++ ++//U3D_PHYD_CPPAT2 ++#define RG_SSUSB_CPPAT_OUT_H_TMP2 (0xf<<16) //19:16 ++#define RG_SSUSB_CPPAT_OUT_H_TMP1 (0xff<<8) //15:8 ++#define RG_SSUSB_CPPAT_OUT_H_TMP0 (0xff<<0) //7:0 ++ ++//U3D_EQ_EYE3 ++#define RG_SSUSB_EQ_LEQ_SHIFT (0x7<<24) //26:24 ++#define RG_SSUSB_EQ_EYE_CNT (0xfffff<<0) //19:0 ++ ++//U3D_KBAND_OUT ++#define RGS_SSUSB_CDR_BAND_5G (0xff<<24) //31:24 ++#define RGS_SSUSB_CDR_BAND_2P5G (0xff<<16) //23:16 ++#define RGS_SSUSB_PLL_BAND_5G (0xff<<8) //15:8 ++#define RGS_SSUSB_PLL_BAND_2P5G (0xff<<0) //7:0 ++ ++//U3D_KBAND_OUT1 ++#define RGS_SSUSB_CDR_VCOCAL_FAIL (0x1<<24) //24:24 ++#define RGS_SSUSB_CDR_VCOCAL_STATE (0xff<<16) //23:16 ++#define RGS_SSUSB_PLL_VCOCAL_FAIL (0x1<<8) //8:8 ++#define RGS_SSUSB_PLL_VCOCAL_STATE (0xff<<0) //7:0 ++ ++ ++/* OFFSET */ ++ ++//U3D_PHYD_MIX0 ++#define RG_SSUSB_P_P3_TX_NG_OFST (31) ++#define RG_SSUSB_TSEQ_EN_OFST (30) ++#define RG_SSUSB_TSEQ_POLEN_OFST (29) ++#define RG_SSUSB_TSEQ_POL_OFST (28) ++#define RG_SSUSB_P_P3_PCLK_NG_OFST (27) ++#define RG_SSUSB_TSEQ_TH_OFST (24) ++#define RG_SSUSB_PRBS_BERTH_OFST (16) ++#define RG_SSUSB_DISABLE_PHY_U2_ON_OFST (15) ++#define RG_SSUSB_DISABLE_PHY_U2_OFF_OFST (14) ++#define RG_SSUSB_PRBS_EN_OFST (13) ++#define RG_SSUSB_BPSLOCK_OFST (12) ++#define RG_SSUSB_RTCOMCNT_OFST (8) ++#define RG_SSUSB_COMCNT_OFST (4) ++#define RG_SSUSB_PRBSEL_CALIB_OFST (0) ++ ++//U3D_PHYD_MIX1 ++#define RG_SSUSB_SLEEP_EN_OFST (31) ++#define RG_SSUSB_PRBSEL_PCS_OFST (28) ++#define RG_SSUSB_TXLFPS_PRD_OFST (24) ++#define RG_SSUSB_P_RX_P0S_CK_OFST (23) ++#define RG_SSUSB_P_TX_P0S_CK_OFST (22) ++#define RG_SSUSB_PDNCTL_OFST (16) ++#define RG_SSUSB_TX_DRV_EN_OFST (15) ++#define RG_SSUSB_TX_DRV_SEL_OFST (14) ++#define RG_SSUSB_TX_DRV_DLY_OFST (8) ++#define RG_SSUSB_BERT_EN_OFST (7) ++#define RG_SSUSB_SCP_TH_OFST (4) ++#define RG_SSUSB_SCP_EN_OFST (3) ++#define RG_SSUSB_RXANSIDEC_TEST_OFST (0) ++ ++//U3D_PHYD_LFPS0 ++#define RG_SSUSB_LFPS_PWD_OFST (30) ++#define RG_SSUSB_FORCE_LFPS_PWD_OFST (29) ++#define RG_SSUSB_RXLFPS_OVF_OFST (24) ++#define RG_SSUSB_P3_ENTRY_SEL_OFST (23) ++#define RG_SSUSB_P3_ENTRY_OFST (22) ++#define RG_SSUSB_RXLFPS_CDRSEL_OFST (20) ++#define RG_SSUSB_RXLFPS_CDRTH_OFST (16) ++#define RG_SSUSB_LOCK5G_BLOCK_OFST (15) ++#define RG_SSUSB_TFIFO_EXT_D_SEL_OFST (14) ++#define RG_SSUSB_TFIFO_NO_EXTEND_OFST (13) ++#define RG_SSUSB_RXLFPS_LOB_OFST (8) ++#define RG_SSUSB_TXLFPS_EN_OFST (7) ++#define RG_SSUSB_TXLFPS_SEL_OFST (6) ++#define RG_SSUSB_RXLFPS_CDRLOCK_OFST (5) ++#define RG_SSUSB_RXLFPS_UPB_OFST (0) ++ ++//U3D_PHYD_LFPS1 ++#define RG_SSUSB_RX_IMP_BIAS_OFST (28) ++#define RG_SSUSB_TX_IMP_BIAS_OFST (24) ++#define RG_SSUSB_FWAKE_TH_OFST (16) ++#define RG_SSUSB_RXLFPS_UDF_OFST (8) ++#define RG_SSUSB_RXLFPS_P0IDLETH_OFST (0) ++ ++//U3D_PHYD_IMPCAL0 ++#define RG_SSUSB_FORCE_TX_IMPSEL_OFST (31) ++#define RG_SSUSB_TX_IMPCAL_EN_OFST (30) ++#define RG_SSUSB_FORCE_TX_IMPCAL_EN_OFST (29) ++#define RG_SSUSB_TX_IMPSEL_OFST (24) ++#define RG_SSUSB_TX_IMPCAL_CALCYC_OFST (16) ++#define RG_SSUSB_TX_IMPCAL_STBCYC_OFST (10) ++#define RG_SSUSB_TX_IMPCAL_CYCCNT_OFST (0) ++ ++//U3D_PHYD_IMPCAL1 ++#define RG_SSUSB_FORCE_RX_IMPSEL_OFST (31) ++#define RG_SSUSB_RX_IMPCAL_EN_OFST (30) ++#define RG_SSUSB_FORCE_RX_IMPCAL_EN_OFST (29) ++#define RG_SSUSB_RX_IMPSEL_OFST (24) ++#define RG_SSUSB_RX_IMPCAL_CALCYC_OFST (16) ++#define RG_SSUSB_RX_IMPCAL_STBCYC_OFST (10) ++#define RG_SSUSB_RX_IMPCAL_CYCCNT_OFST (0) ++ ++//U3D_PHYD_TXPLL0 ++#define RG_SSUSB_TXPLL_DDSEN_CYC_OFST (27) ++#define RG_SSUSB_TXPLL_ON_OFST (26) ++#define RG_SSUSB_FORCE_TXPLLON_OFST (25) ++#define RG_SSUSB_TXPLL_STBCYC_OFST (16) ++#define RG_SSUSB_TXPLL_NCPOCHG_CYC_OFST (12) ++#define RG_SSUSB_TXPLL_NCPOEN_CYC_OFST (10) ++#define RG_SSUSB_TXPLL_DDSRSTB_CYC_OFST (0) ++ ++//U3D_PHYD_TXPLL1 ++#define RG_SSUSB_PLL_NCPO_EN_OFST (31) ++#define RG_SSUSB_PLL_FIFO_START_MAN_OFST (30) ++#define RG_SSUSB_PLL_NCPO_CHG_OFST (28) ++#define RG_SSUSB_PLL_DDS_RSTB_OFST (27) ++#define RG_SSUSB_PLL_DDS_PWDB_OFST (26) ++#define RG_SSUSB_PLL_DDSEN_OFST (25) ++#define RG_SSUSB_PLL_AUTOK_VCO_OFST (24) ++#define RG_SSUSB_PLL_PWD_OFST (23) ++#define RG_SSUSB_RX_AFE_PWD_OFST (22) ++#define RG_SSUSB_PLL_TCADJ_OFST (16) ++#define RG_SSUSB_FORCE_CDR_TCADJ_OFST (15) ++#define RG_SSUSB_FORCE_CDR_AUTOK_VCO_OFST (14) ++#define RG_SSUSB_FORCE_CDR_PWD_OFST (13) ++#define RG_SSUSB_FORCE_PLL_NCPO_EN_OFST (12) ++#define RG_SSUSB_FORCE_PLL_FIFO_START_MAN_OFST (11) ++#define RG_SSUSB_FORCE_PLL_NCPO_CHG_OFST (9) ++#define RG_SSUSB_FORCE_PLL_DDS_RSTB_OFST (8) ++#define RG_SSUSB_FORCE_PLL_DDS_PWDB_OFST (7) ++#define RG_SSUSB_FORCE_PLL_DDSEN_OFST (6) ++#define RG_SSUSB_FORCE_PLL_TCADJ_OFST (5) ++#define RG_SSUSB_FORCE_PLL_AUTOK_VCO_OFST (4) ++#define RG_SSUSB_FORCE_PLL_PWD_OFST (3) ++#define RG_SSUSB_FLT_1_DISPERR_B_OFST (2) ++ ++//U3D_PHYD_TXPLL2 ++#define RG_SSUSB_TX_LFPS_EN_OFST (31) ++#define RG_SSUSB_FORCE_TX_LFPS_EN_OFST (30) ++#define RG_SSUSB_TX_LFPS_OFST (29) ++#define RG_SSUSB_FORCE_TX_LFPS_OFST (28) ++#define RG_SSUSB_RXPLL_STB_OFST (27) ++#define RG_SSUSB_TXPLL_STB_OFST (26) ++#define RG_SSUSB_FORCE_RXPLL_STB_OFST (25) ++#define RG_SSUSB_FORCE_TXPLL_STB_OFST (24) ++#define RG_SSUSB_RXPLL_REFCKSEL_OFST (16) ++#define RG_SSUSB_RXPLL_STBMODE_OFST (11) ++#define RG_SSUSB_RXPLL_ON_OFST (10) ++#define RG_SSUSB_FORCE_RXPLLON_OFST (9) ++#define RG_SSUSB_FORCE_RX_AFE_PWD_OFST (8) ++#define RG_SSUSB_CDR_AUTOK_VCO_OFST (7) ++#define RG_SSUSB_CDR_PWD_OFST (6) ++#define RG_SSUSB_CDR_TCADJ_OFST (0) ++ ++//U3D_PHYD_FL0 ++#define RG_SSUSB_RX_FL_TARGET_OFST (16) ++#define RG_SSUSB_RX_FL_CYCLECNT_OFST (0) ++ ++//U3D_PHYD_MIX2 ++#define RG_SSUSB_RX_EQ_RST_OFST (31) ++#define RG_SSUSB_RX_EQ_RST_SEL_OFST (30) ++#define RG_SSUSB_RXVAL_RST_OFST (29) ++#define RG_SSUSB_RXVAL_CNT_OFST (24) ++#define RG_SSUSB_CDROS_EN_OFST (18) ++#define RG_SSUSB_CDR_LCKOP_OFST (16) ++#define RG_SSUSB_RX_FL_LOCKTH_OFST (8) ++#define RG_SSUSB_RX_FL_OFFSET_OFST (0) ++ ++//U3D_PHYD_RX0 ++#define RG_SSUSB_T2RLB_BERTH_OFST (24) ++#define RG_SSUSB_T2RLB_PAT_OFST (16) ++#define RG_SSUSB_T2RLB_EN_OFST (15) ++#define RG_SSUSB_T2RLB_BPSCRAMB_OFST (14) ++#define RG_SSUSB_T2RLB_SERIAL_OFST (13) ++#define RG_SSUSB_T2RLB_MODE_OFST (11) ++#define RG_SSUSB_RX_SAOSC_EN_OFST (10) ++#define RG_SSUSB_RX_SAOSC_EN_SEL_OFST (9) ++#define RG_SSUSB_RX_DFE_OPTION_OFST (8) ++#define RG_SSUSB_RX_DFE_EN_OFST (7) ++#define RG_SSUSB_RX_DFE_EN_SEL_OFST (6) ++#define RG_SSUSB_RX_EQ_EN_OFST (5) ++#define RG_SSUSB_RX_EQ_EN_SEL_OFST (4) ++#define RG_SSUSB_RX_SAOSC_RST_OFST (3) ++#define RG_SSUSB_RX_SAOSC_RST_SEL_OFST (2) ++#define RG_SSUSB_RX_DFE_RST_OFST (1) ++#define RG_SSUSB_RX_DFE_RST_SEL_OFST (0) ++ ++//U3D_PHYD_T2RLB ++#define RG_SSUSB_EQTRAIN_CH_MODE_OFST (28) ++#define RG_SSUSB_PRB_OUT_CPPAT_OFST (27) ++#define RG_SSUSB_BPANSIENC_OFST (26) ++#define RG_SSUSB_VALID_EN_OFST (25) ++#define RG_SSUSB_EBUF_SRST_OFST (24) ++#define RG_SSUSB_K_EMP_OFST (20) ++#define RG_SSUSB_K_FUL_OFST (16) ++#define RG_SSUSB_T2RLB_BDATRST_OFST (12) ++#define RG_SSUSB_P_T2RLB_SKP_EN_OFST (10) ++#define RG_SSUSB_T2RLB_PATMODE_OFST (8) ++#define RG_SSUSB_T2RLB_TSEQCNT_OFST (0) ++ ++//U3D_PHYD_CPPAT ++#define RG_SSUSB_CPPAT_PROGRAM_EN_OFST (24) ++#define RG_SSUSB_CPPAT_TOZ_OFST (21) ++#define RG_SSUSB_CPPAT_PRBS_EN_OFST (20) ++#define RG_SSUSB_CPPAT_OUT_TMP2_OFST (16) ++#define RG_SSUSB_CPPAT_OUT_TMP1_OFST (8) ++#define RG_SSUSB_CPPAT_OUT_TMP0_OFST (0) ++ ++//U3D_PHYD_MIX3 ++#define RG_SSUSB_CDR_TCADJ_MINUS_OFST (31) ++#define RG_SSUSB_P_CDROS_EN_OFST (30) ++#define RG_SSUSB_P_P2_TX_DRV_DIS_OFST (28) ++#define RG_SSUSB_CDR_TCADJ_OFFSET_OFST (24) ++#define RG_SSUSB_PLL_TCADJ_MINUS_OFST (23) ++#define RG_SSUSB_FORCE_PLL_BIAS_LPF_EN_OFST (20) ++#define RG_SSUSB_PLL_BIAS_LPF_EN_OFST (19) ++#define RG_SSUSB_PLL_TCADJ_OFFSET_OFST (16) ++#define RG_SSUSB_FORCE_PLL_SSCEN_OFST (15) ++#define RG_SSUSB_PLL_SSCEN_OFST (14) ++#define RG_SSUSB_FORCE_CDR_PI_PWD_OFST (13) ++#define RG_SSUSB_CDR_PI_PWD_OFST (12) ++#define RG_SSUSB_CDR_PI_MODE_OFST (11) ++#define RG_SSUSB_TXPLL_SSCEN_CYC_OFST (0) ++ ++//U3D_PHYD_EBUFCTL ++#define RG_SSUSB_EBUFCTL_OFST (0) ++ ++//U3D_PHYD_PIPE0 ++#define RG_SSUSB_RXTERMINATION_OFST (30) ++#define RG_SSUSB_RXEQTRAINING_OFST (29) ++#define RG_SSUSB_RXPOLARITY_OFST (28) ++#define RG_SSUSB_TXDEEMPH_OFST (26) ++#define RG_SSUSB_POWERDOWN_OFST (24) ++#define RG_SSUSB_TXONESZEROS_OFST (23) ++#define RG_SSUSB_TXELECIDLE_OFST (22) ++#define RG_SSUSB_TXDETECTRX_OFST (21) ++#define RG_SSUSB_PIPE_SEL_OFST (20) ++#define RG_SSUSB_TXDATAK_OFST (16) ++#define RG_SSUSB_CDR_STABLE_SEL_OFST (15) ++#define RG_SSUSB_CDR_STABLE_OFST (14) ++#define RG_SSUSB_CDR_RSTB_SEL_OFST (13) ++#define RG_SSUSB_CDR_RSTB_OFST (12) ++#define RG_SSUSB_P_ERROR_SEL_OFST (4) ++#define RG_SSUSB_TXMARGIN_OFST (1) ++#define RG_SSUSB_TXCOMPLIANCE_OFST (0) ++ ++//U3D_PHYD_PIPE1 ++#define RG_SSUSB_TXDATA_OFST (0) ++ ++//U3D_PHYD_MIX4 ++#define RG_SSUSB_CDROS_CNT_OFST (24) ++#define RG_SSUSB_T2RLB_BER_EN_OFST (16) ++#define RG_SSUSB_T2RLB_BER_RATE_OFST (0) ++ ++//U3D_PHYD_CKGEN0 ++#define RG_SSUSB_RFIFO_IMPLAT_OFST (27) ++#define RG_SSUSB_TFIFO_PSEL_OFST (24) ++#define RG_SSUSB_CKGEN_PSEL_OFST (8) ++#define RG_SSUSB_RXCK_INV_OFST (0) ++ ++//U3D_PHYD_MIX5 ++#define RG_SSUSB_PRB_SEL_OFST (16) ++#define RG_SSUSB_RXPLL_STBCYC_OFST (0) ++ ++//U3D_PHYD_RESERVED ++#define RG_SSUSB_PHYD_RESERVE_OFST (0) ++//#define RG_SSUSB_RX_SIGDET_SEL_OFST (11) ++//#define RG_SSUSB_RX_SIGDET_EN_OFST (12) ++//#define RG_SSUSB_RX_PI_CAL_MANUAL_SEL_OFST (9) ++//#define RG_SSUSB_RX_PI_CAL_MANUAL_EN_OFST (10) ++ ++//U3D_PHYD_CDR0 ++#define RG_SSUSB_CDR_BIC_LTR_OFST (28) ++#define RG_SSUSB_CDR_BIC_LTD0_OFST (24) ++#define RG_SSUSB_CDR_BC_LTD1_OFST (16) ++#define RG_SSUSB_CDR_BC_LTR_OFST (8) ++#define RG_SSUSB_CDR_BC_LTD0_OFST (0) ++ ++//U3D_PHYD_CDR1 ++#define RG_SSUSB_CDR_BIR_LTD1_OFST (24) ++#define RG_SSUSB_CDR_BIR_LTR_OFST (16) ++#define RG_SSUSB_CDR_BIR_LTD0_OFST (8) ++#define RG_SSUSB_CDR_BW_SEL_OFST (6) ++#define RG_SSUSB_CDR_BIC_LTD1_OFST (0) ++ ++//U3D_PHYD_PLL_0 ++#define RG_SSUSB_FORCE_CDR_BAND_5G_OFST (28) ++#define RG_SSUSB_FORCE_CDR_BAND_2P5G_OFST (27) ++#define RG_SSUSB_FORCE_PLL_BAND_5G_OFST (26) ++#define RG_SSUSB_FORCE_PLL_BAND_2P5G_OFST (25) ++#define RG_SSUSB_P_EQ_T_SEL_OFST (15) ++#define RG_SSUSB_PLL_ISO_EN_CYC_OFST (5) ++#define RG_SSUSB_PLLBAND_RECAL_OFST (4) ++#define RG_SSUSB_PLL_DDS_ISO_EN_OFST (3) ++#define RG_SSUSB_FORCE_PLL_DDS_ISO_EN_OFST (2) ++#define RG_SSUSB_PLL_DDS_PWR_ON_OFST (1) ++#define RG_SSUSB_FORCE_PLL_DDS_PWR_ON_OFST (0) ++ ++//U3D_PHYD_PLL_1 ++#define RG_SSUSB_CDR_BAND_5G_OFST (24) ++#define RG_SSUSB_CDR_BAND_2P5G_OFST (16) ++#define RG_SSUSB_PLL_BAND_5G_OFST (8) ++#define RG_SSUSB_PLL_BAND_2P5G_OFST (0) ++ ++//U3D_PHYD_BCN_DET_1 ++#define RG_SSUSB_P_BCN_OBS_PRD_OFST (16) ++#define RG_SSUSB_U_BCN_OBS_PRD_OFST (0) ++ ++//U3D_PHYD_BCN_DET_2 ++#define RG_SSUSB_P_BCN_OBS_SEL_OFST (16) ++#define RG_SSUSB_BCN_DET_DIS_OFST (12) ++#define RG_SSUSB_U_BCN_OBS_SEL_OFST (0) ++ ++//U3D_EQ0 ++#define RG_SSUSB_EQ_DLHL_LFI_OFST (24) ++#define RG_SSUSB_EQ_DHHL_LFI_OFST (16) ++#define RG_SSUSB_EQ_DD0HOS_LFI_OFST (8) ++#define RG_SSUSB_EQ_DD0LOS_LFI_OFST (0) ++ ++//U3D_EQ1 ++#define RG_SSUSB_EQ_DD1HOS_LFI_OFST (24) ++#define RG_SSUSB_EQ_DD1LOS_LFI_OFST (16) ++#define RG_SSUSB_EQ_DE0OS_LFI_OFST (8) ++#define RG_SSUSB_EQ_DE1OS_LFI_OFST (0) ++ ++//U3D_EQ2 ++#define RG_SSUSB_EQ_DLHLOS_LFI_OFST (24) ++#define RG_SSUSB_EQ_DHHLOS_LFI_OFST (16) ++#define RG_SSUSB_EQ_STOPTIME_OFST (14) ++#define RG_SSUSB_EQ_DHHL_LF_SEL_OFST (11) ++#define RG_SSUSB_EQ_DSAOS_LF_SEL_OFST (8) ++#define RG_SSUSB_EQ_STARTTIME_OFST (6) ++#define RG_SSUSB_EQ_DLEQ_LF_SEL_OFST (3) ++#define RG_SSUSB_EQ_DLHL_LF_SEL_OFST (0) ++ ++//U3D_EQ3 ++#define RG_SSUSB_EQ_DLEQ_LFI_GEN2_OFST (28) ++#define RG_SSUSB_EQ_DLEQ_LFI_GEN1_OFST (24) ++#define RG_SSUSB_EQ_DEYE0OS_LFI_OFST (16) ++#define RG_SSUSB_EQ_DEYE1OS_LFI_OFST (8) ++#define RG_SSUSB_EQ_TRI_DET_EN_OFST (7) ++#define RG_SSUSB_EQ_TRI_DET_TH_OFST (0) ++ ++//U3D_EQ_EYE0 ++#define RG_SSUSB_EQ_EYE_XOFFSET_OFST (25) ++#define RG_SSUSB_EQ_EYE_MON_EN_OFST (24) ++#define RG_SSUSB_EQ_EYE0_Y_OFST (16) ++#define RG_SSUSB_EQ_EYE1_Y_OFST (8) ++#define RG_SSUSB_EQ_PILPO_ROUT_OFST (7) ++#define RG_SSUSB_EQ_PI_KPGAIN_OFST (4) ++#define RG_SSUSB_EQ_EYE_CNT_EN_OFST (3) ++ ++//U3D_EQ_EYE1 ++#define RG_SSUSB_EQ_SIGDET_OFST (24) ++#define RG_SSUSB_EQ_EYE_MASK_OFST (7) ++ ++//U3D_EQ_EYE2 ++#define RG_SSUSB_EQ_RX500M_CK_SEL_OFST (31) ++#define RG_SSUSB_EQ_SD_CNT1_OFST (24) ++#define RG_SSUSB_EQ_ISIFLAG_SEL_OFST (22) ++#define RG_SSUSB_EQ_SD_CNT0_OFST (16) ++ ++//U3D_EQ_DFE0 ++#define RG_SSUSB_EQ_LEQMAX_OFST (28) ++#define RG_SSUSB_EQ_DFEX_EN_OFST (27) ++#define RG_SSUSB_EQ_DFEX_LF_SEL_OFST (24) ++#define RG_SSUSB_EQ_CHK_EYE_H_OFST (23) ++#define RG_SSUSB_EQ_PIEYE_INI_OFST (16) ++#define RG_SSUSB_EQ_PI90_INI_OFST (8) ++#define RG_SSUSB_EQ_PI0_INI_OFST (0) ++ ++//U3D_EQ_DFE1 ++#define RG_SSUSB_EQ_REV_OFST (16) ++#define RG_SSUSB_EQ_DFEYEN_DUR_OFST (12) ++#define RG_SSUSB_EQ_DFEXEN_DUR_OFST (8) ++#define RG_SSUSB_EQ_DFEX_RST_OFST (7) ++#define RG_SSUSB_EQ_GATED_RXD_B_OFST (6) ++#define RG_SSUSB_EQ_PI90CK_SEL_OFST (4) ++#define RG_SSUSB_EQ_DFEX_DIS_OFST (2) ++#define RG_SSUSB_EQ_DFEYEN_STOP_DIS_OFST (1) ++#define RG_SSUSB_EQ_DFEXEN_SEL_OFST (0) ++ ++//U3D_EQ_DFE2 ++#define RG_SSUSB_EQ_MON_SEL_OFST (24) ++#define RG_SSUSB_EQ_LEQOSC_DLYCNT_OFST (16) ++#define RG_SSUSB_EQ_DLEQOS_LFI_OFST (8) ++#define RG_SSUSB_EQ_LEQ_STOP_TO_OFST (0) ++ ++//U3D_EQ_DFE3 ++#define RG_SSUSB_EQ_RESERVED_OFST (0) ++ ++//U3D_PHYD_MON0 ++#define RGS_SSUSB_BERT_BERC_OFST (16) ++#define RGS_SSUSB_LFPS_OFST (12) ++#define RGS_SSUSB_TRAINDEC_OFST (8) ++#define RGS_SSUSB_SCP_PAT_OFST (0) ++ ++//U3D_PHYD_MON1 ++#define RGS_SSUSB_RX_FL_OUT_OFST (0) ++ ++//U3D_PHYD_MON2 ++#define RGS_SSUSB_T2RLB_ERRCNT_OFST (16) ++#define RGS_SSUSB_RETRACK_OFST (12) ++#define RGS_SSUSB_RXPLL_LOCK_OFST (10) ++#define RGS_SSUSB_CDR_VCOCAL_CPLT_D_OFST (9) ++#define RGS_SSUSB_PLL_VCOCAL_CPLT_D_OFST (8) ++#define RGS_SSUSB_PDNCTL_OFST (0) ++ ++//U3D_PHYD_MON3 ++#define RGS_SSUSB_TSEQ_ERRCNT_OFST (16) ++#define RGS_SSUSB_PRBS_ERRCNT_OFST (0) ++ ++//U3D_PHYD_MON4 ++#define RGS_SSUSB_RX_LSLOCK_CNT_OFST (24) ++#define RGS_SSUSB_SCP_DETCNT_OFST (16) ++#define RGS_SSUSB_TSEQ_DETCNT_OFST (0) ++ ++//U3D_PHYD_MON5 ++#define RGS_SSUSB_EBUFMSG_OFST (16) ++#define RGS_SSUSB_BERT_LOCK_OFST (15) ++#define RGS_SSUSB_SCP_DET_OFST (14) ++#define RGS_SSUSB_TSEQ_DET_OFST (13) ++#define RGS_SSUSB_EBUF_UDF_OFST (12) ++#define RGS_SSUSB_EBUF_OVF_OFST (11) ++#define RGS_SSUSB_PRBS_PASSTH_OFST (10) ++#define RGS_SSUSB_PRBS_PASS_OFST (9) ++#define RGS_SSUSB_PRBS_LOCK_OFST (8) ++#define RGS_SSUSB_T2RLB_ERR_OFST (6) ++#define RGS_SSUSB_T2RLB_PASSTH_OFST (5) ++#define RGS_SSUSB_T2RLB_PASS_OFST (4) ++#define RGS_SSUSB_T2RLB_LOCK_OFST (3) ++#define RGS_SSUSB_RX_IMPCAL_DONE_OFST (2) ++#define RGS_SSUSB_TX_IMPCAL_DONE_OFST (1) ++#define RGS_SSUSB_RXDETECTED_OFST (0) ++ ++//U3D_PHYD_MON6 ++#define RGS_SSUSB_SIGCAL_DONE_OFST (30) ++#define RGS_SSUSB_SIGCAL_CAL_OUT_OFST (29) ++#define RGS_SSUSB_SIGCAL_OFFSET_OFST (24) ++#define RGS_SSUSB_RX_IMP_SEL_OFST (16) ++#define RGS_SSUSB_TX_IMP_SEL_OFST (8) ++#define RGS_SSUSB_TFIFO_MSG_OFST (4) ++#define RGS_SSUSB_RFIFO_MSG_OFST (0) ++ ++//U3D_PHYD_MON7 ++#define RGS_SSUSB_FT_OUT_OFST (8) ++#define RGS_SSUSB_PRB_OUT_OFST (0) ++ ++//U3D_PHYA_RX_MON0 ++#define RGS_SSUSB_EQ_DCLEQ_OFST (24) ++#define RGS_SSUSB_EQ_DCD0H_OFST (16) ++#define RGS_SSUSB_EQ_DCD0L_OFST (8) ++#define RGS_SSUSB_EQ_DCD1H_OFST (0) ++ ++//U3D_PHYA_RX_MON1 ++#define RGS_SSUSB_EQ_DCD1L_OFST (24) ++#define RGS_SSUSB_EQ_DCE0_OFST (16) ++#define RGS_SSUSB_EQ_DCE1_OFST (8) ++#define RGS_SSUSB_EQ_DCHHL_OFST (0) ++ ++//U3D_PHYA_RX_MON2 ++#define RGS_SSUSB_EQ_LEQ_STOP_OFST (31) ++#define RGS_SSUSB_EQ_DCLHL_OFST (24) ++#define RGS_SSUSB_EQ_STATUS_OFST (16) ++#define RGS_SSUSB_EQ_DCEYE0_OFST (8) ++#define RGS_SSUSB_EQ_DCEYE1_OFST (0) ++ ++//U3D_PHYA_RX_MON3 ++#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST (0) ++ ++//U3D_PHYA_RX_MON4 ++#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST (0) ++ ++//U3D_PHYA_RX_MON5 ++#define RGS_SSUSB_EQ_DCLEQOS_OFST (8) ++#define RGS_SSUSB_EQ_EYE_CNT_RDY_OFST (7) ++#define RGS_SSUSB_EQ_PILPO_OFST (0) ++ ++//U3D_PHYD_CPPAT2 ++#define RG_SSUSB_CPPAT_OUT_H_TMP2_OFST (16) ++#define RG_SSUSB_CPPAT_OUT_H_TMP1_OFST (8) ++#define RG_SSUSB_CPPAT_OUT_H_TMP0_OFST (0) ++ ++//U3D_EQ_EYE3 ++#define RG_SSUSB_EQ_LEQ_SHIFT_OFST (24) ++#define RG_SSUSB_EQ_EYE_CNT_OFST (0) ++ ++//U3D_KBAND_OUT ++#define RGS_SSUSB_CDR_BAND_5G_OFST (24) ++#define RGS_SSUSB_CDR_BAND_2P5G_OFST (16) ++#define RGS_SSUSB_PLL_BAND_5G_OFST (8) ++#define RGS_SSUSB_PLL_BAND_2P5G_OFST (0) ++ ++//U3D_KBAND_OUT1 ++#define RGS_SSUSB_CDR_VCOCAL_FAIL_OFST (24) ++#define RGS_SSUSB_CDR_VCOCAL_STATE_OFST (16) ++#define RGS_SSUSB_PLL_VCOCAL_FAIL_OFST (8) ++#define RGS_SSUSB_PLL_VCOCAL_STATE_OFST (0) ++ ++ ++/////////////////////////////////////////////////////////////////////////////// ++ ++struct u3phyd_bank2_reg { ++ //0x0 ++ PHY_LE32 b2_phyd_top1; ++ PHY_LE32 b2_phyd_top2; ++ PHY_LE32 b2_phyd_top3; ++ PHY_LE32 b2_phyd_top4; ++ //0x10 ++ PHY_LE32 b2_phyd_top5; ++ PHY_LE32 b2_phyd_top6; ++ PHY_LE32 b2_phyd_top7; ++ PHY_LE32 b2_phyd_p_sigdet1; ++ //0x20 ++ PHY_LE32 b2_phyd_p_sigdet2; ++ PHY_LE32 b2_phyd_p_sigdet_cal1; ++ PHY_LE32 b2_phyd_rxdet1; ++ PHY_LE32 b2_phyd_rxdet2; ++ //0x30 ++ PHY_LE32 b2_phyd_misc0; ++ PHY_LE32 b2_phyd_misc2; ++ PHY_LE32 b2_phyd_misc3; ++ PHY_LE32 reserve0; ++ //0x40 ++ PHY_LE32 b2_rosc_0; ++ PHY_LE32 b2_rosc_1; ++ PHY_LE32 b2_rosc_2; ++ PHY_LE32 b2_rosc_3; ++ //0x50 ++ PHY_LE32 b2_rosc_4; ++ PHY_LE32 b2_rosc_5; ++ PHY_LE32 b2_rosc_6; ++ PHY_LE32 b2_rosc_7; ++ //0x60 ++ PHY_LE32 b2_rosc_8; ++ PHY_LE32 b2_rosc_9; ++ PHY_LE32 b2_rosc_a; ++ PHY_LE32 reserve1; ++ //0x70~0xd0 ++ PHY_LE32 reserve2[28]; ++ //0xe0 ++ PHY_LE32 phyd_version; ++ PHY_LE32 phyd_model; ++}; ++ ++//U3D_B2_PHYD_TOP1 ++#define RG_SSUSB_PCIE2_K_EMP (0xf<<28) //31:28 ++#define RG_SSUSB_PCIE2_K_FUL (0xf<<24) //27:24 ++#define RG_SSUSB_TX_EIDLE_LP_EN (0x1<<17) //17:17 ++#define RG_SSUSB_FORCE_TX_EIDLE_LP_EN (0x1<<16) //16:16 ++#define RG_SSUSB_SIGDET_EN (0x1<<15) //15:15 ++#define RG_SSUSB_FORCE_SIGDET_EN (0x1<<14) //14:14 ++#define RG_SSUSB_CLKRX_EN (0x1<<13) //13:13 ++#define RG_SSUSB_FORCE_CLKRX_EN (0x1<<12) //12:12 ++#define RG_SSUSB_CLKTX_EN (0x1<<11) //11:11 ++#define RG_SSUSB_FORCE_CLKTX_EN (0x1<<10) //10:10 ++#define RG_SSUSB_CLK_REQ_N_I (0x1<<9) //9:9 ++#define RG_SSUSB_FORCE_CLK_REQ_N_I (0x1<<8) //8:8 ++#define RG_SSUSB_RATE (0x1<<6) //6:6 ++#define RG_SSUSB_FORCE_RATE (0x1<<5) //5:5 ++#define RG_SSUSB_PCIE_MODE_SEL (0x1<<4) //4:4 ++#define RG_SSUSB_FORCE_PCIE_MODE_SEL (0x1<<3) //3:3 ++#define RG_SSUSB_PHY_MODE (0x3<<1) //2:1 ++#define RG_SSUSB_FORCE_PHY_MODE (0x1<<0) //0:0 ++ ++//U3D_B2_PHYD_TOP2 ++#define RG_SSUSB_FORCE_IDRV_6DB (0x1<<30) //30:30 ++#define RG_SSUSB_IDRV_6DB (0x3f<<24) //29:24 ++#define RG_SSUSB_FORCE_IDEM_3P5DB (0x1<<22) //22:22 ++#define RG_SSUSB_IDEM_3P5DB (0x3f<<16) //21:16 ++#define RG_SSUSB_FORCE_IDRV_3P5DB (0x1<<14) //14:14 ++#define RG_SSUSB_IDRV_3P5DB (0x3f<<8) //13:8 ++#define RG_SSUSB_FORCE_IDRV_0DB (0x1<<6) //6:6 ++#define RG_SSUSB_IDRV_0DB (0x3f<<0) //5:0 ++ ++//U3D_B2_PHYD_TOP3 ++#define RG_SSUSB_TX_BIASI (0x7<<25) //27:25 ++#define RG_SSUSB_FORCE_TX_BIASI_EN (0x1<<24) //24:24 ++#define RG_SSUSB_TX_BIASI_EN (0x1<<16) //16:16 ++#define RG_SSUSB_FORCE_TX_BIASI (0x1<<13) //13:13 ++#define RG_SSUSB_FORCE_IDEM_6DB (0x1<<8) //8:8 ++#define RG_SSUSB_IDEM_6DB (0x3f<<0) //5:0 ++ ++//U3D_B2_PHYD_TOP4 ++#define RG_SSUSB_G1_CDR_BIC_LTR (0xf<<28) //31:28 ++#define RG_SSUSB_G1_CDR_BIC_LTD0 (0xf<<24) //27:24 ++#define RG_SSUSB_G1_CDR_BC_LTD1 (0x1f<<16) //20:16 ++#define RG_SSUSB_G1_CDR_BC_LTR (0x1f<<8) //12:8 ++#define RG_SSUSB_G1_CDR_BC_LTD0 (0x1f<<0) //4:0 ++ ++//U3D_B2_PHYD_TOP5 ++#define RG_SSUSB_G1_CDR_BIR_LTD1 (0x1f<<24) //28:24 ++#define RG_SSUSB_G1_CDR_BIR_LTR (0x1f<<16) //20:16 ++#define RG_SSUSB_G1_CDR_BIR_LTD0 (0x1f<<8) //12:8 ++#define RG_SSUSB_G1_CDR_BIC_LTD1 (0xf<<0) //3:0 ++ ++//U3D_B2_PHYD_TOP6 ++#define RG_SSUSB_G2_CDR_BIC_LTR (0xf<<28) //31:28 ++#define RG_SSUSB_G2_CDR_BIC_LTD0 (0xf<<24) //27:24 ++#define RG_SSUSB_G2_CDR_BC_LTD1 (0x1f<<16) //20:16 ++#define RG_SSUSB_G2_CDR_BC_LTR (0x1f<<8) //12:8 ++#define RG_SSUSB_G2_CDR_BC_LTD0 (0x1f<<0) //4:0 ++ ++//U3D_B2_PHYD_TOP7 ++#define RG_SSUSB_G2_CDR_BIR_LTD1 (0x1f<<24) //28:24 ++#define RG_SSUSB_G2_CDR_BIR_LTR (0x1f<<16) //20:16 ++#define RG_SSUSB_G2_CDR_BIR_LTD0 (0x1f<<8) //12:8 ++#define RG_SSUSB_G2_CDR_BIC_LTD1 (0xf<<0) //3:0 ++ ++//U3D_B2_PHYD_P_SIGDET1 ++#define RG_SSUSB_P_SIGDET_FLT_DIS (0x1<<31) //31:31 ++#define RG_SSUSB_P_SIGDET_FLT_G2_DEAST_SEL (0x7f<<24) //30:24 ++#define RG_SSUSB_P_SIGDET_FLT_G1_DEAST_SEL (0x7f<<16) //22:16 ++#define RG_SSUSB_P_SIGDET_FLT_P2_AST_SEL (0x7f<<8) //14:8 ++#define RG_SSUSB_P_SIGDET_FLT_PX_AST_SEL (0x7f<<0) //6:0 ++ ++//U3D_B2_PHYD_P_SIGDET2 ++#define RG_SSUSB_P_SIGDET_RX_VAL_S (0x1<<29) //29:29 ++#define RG_SSUSB_P_SIGDET_L0S_DEAS_SEL (0x1<<28) //28:28 ++#define RG_SSUSB_P_SIGDET_L0_EXIT_S (0x1<<27) //27:27 ++#define RG_SSUSB_P_SIGDET_L0S_EXIT_T_S (0x3<<25) //26:25 ++#define RG_SSUSB_P_SIGDET_L0S_EXIT_S (0x1<<24) //24:24 ++#define RG_SSUSB_P_SIGDET_L0S_ENTRY_S (0x1<<16) //16:16 ++#define RG_SSUSB_P_SIGDET_PRB_SEL (0x1<<10) //10:10 ++#define RG_SSUSB_P_SIGDET_BK_SIG_T (0x3<<8) //9:8 ++#define RG_SSUSB_P_SIGDET_P2_RXLFPS (0x1<<6) //6:6 ++#define RG_SSUSB_P_SIGDET_NON_BK_AD (0x1<<5) //5:5 ++#define RG_SSUSB_P_SIGDET_BK_B_RXEQ (0x1<<4) //4:4 ++#define RG_SSUSB_P_SIGDET_G2_KO_SEL (0x3<<2) //3:2 ++#define RG_SSUSB_P_SIGDET_G1_KO_SEL (0x3<<0) //1:0 ++ ++//U3D_B2_PHYD_P_SIGDET_CAL1 ++#define RG_SSUSB_P_SIGDET_CAL_OFFSET (0x1f<<24) //28:24 ++#define RG_SSUSB_P_FORCE_SIGDET_CAL_OFFSET (0x1<<16) //16:16 ++#define RG_SSUSB_P_SIGDET_CAL_EN (0x1<<8) //8:8 ++#define RG_SSUSB_P_FORCE_SIGDET_CAL_EN (0x1<<3) //3:3 ++#define RG_SSUSB_P_SIGDET_FLT_EN (0x1<<2) //2:2 ++#define RG_SSUSB_P_SIGDET_SAMPLE_PRD (0x1<<1) //1:1 ++#define RG_SSUSB_P_SIGDET_REK (0x1<<0) //0:0 ++ ++//U3D_B2_PHYD_RXDET1 ++#define RG_SSUSB_RXDET_PRB_SEL (0x1<<31) //31:31 ++#define RG_SSUSB_FORCE_CMDET (0x1<<30) //30:30 ++#define RG_SSUSB_RXDET_EN (0x1<<29) //29:29 ++#define RG_SSUSB_FORCE_RXDET_EN (0x1<<28) //28:28 ++#define RG_SSUSB_RXDET_K_TWICE (0x1<<27) //27:27 ++#define RG_SSUSB_RXDET_STB3_SET (0x1ff<<18) //26:18 ++#define RG_SSUSB_RXDET_STB2_SET (0x1ff<<9) //17:9 ++#define RG_SSUSB_RXDET_STB1_SET (0x1ff<<0) //8:0 ++ ++//U3D_B2_PHYD_RXDET2 ++#define RG_SSUSB_PHYD_TRAINDEC_FORCE_CGEN (0x1<<31) //31:31 ++#define RG_SSUSB_PHYD_BERTLB_FORCE_CGEN (0x1<<30) //30:30 ++#define RG_SSUSB_PHYD_T2RLB_FORCE_CGEN (0x1<<29) //29:29 ++#define RG_SSUSB_PDN_T_SEL (0x3<<18) //19:18 ++#define RG_SSUSB_RXDET_STB3_SET_P3 (0x1ff<<9) //17:9 ++#define RG_SSUSB_RXDET_STB2_SET_P3 (0x1ff<<0) //8:0 ++ ++//U3D_B2_PHYD_MISC0 ++#define RG_SSUSB_FORCE_PLL_DDS_HF_EN (0x1<<22) //22:22 ++#define RG_SSUSB_PLL_DDS_HF_EN_MAN (0x1<<21) //21:21 ++#define RG_SSUSB_RXLFPS_ENTXDRV (0x1<<20) //20:20 ++#define RG_SSUSB_RX_FL_UNLOCKTH (0xf<<16) //19:16 ++#define RG_SSUSB_LFPS_PSEL (0x1<<15) //15:15 ++#define RG_SSUSB_RX_SIGDET_EN (0x1<<14) //14:14 ++#define RG_SSUSB_RX_SIGDET_EN_SEL (0x1<<13) //13:13 ++#define RG_SSUSB_RX_PI_CAL_EN (0x1<<12) //12:12 ++#define RG_SSUSB_RX_PI_CAL_EN_SEL (0x1<<11) //11:11 ++#define RG_SSUSB_P3_CLS_CK_SEL (0x1<<10) //10:10 ++#define RG_SSUSB_T2RLB_PSEL (0x3<<8) //9:8 ++#define RG_SSUSB_PPCTL_PSEL (0x7<<5) //7:5 ++#define RG_SSUSB_PHYD_TX_DATA_INV (0x1<<4) //4:4 ++#define RG_SSUSB_BERTLB_PSEL (0x3<<2) //3:2 ++#define RG_SSUSB_RETRACK_DIS (0x1<<1) //1:1 ++#define RG_SSUSB_PPERRCNT_CLR (0x1<<0) //0:0 ++ ++//U3D_B2_PHYD_MISC2 ++#define RG_SSUSB_FRC_PLL_DDS_PREDIV2 (0x1<<31) //31:31 ++#define RG_SSUSB_FRC_PLL_DDS_IADJ (0xf<<27) //30:27 ++#define RG_SSUSB_P_SIGDET_125FILTER (0x1<<26) //26:26 ++#define RG_SSUSB_P_SIGDET_RST_FILTER (0x1<<25) //25:25 ++#define RG_SSUSB_P_SIGDET_EID_USE_RAW (0x1<<24) //24:24 ++#define RG_SSUSB_P_SIGDET_LTD_USE_RAW (0x1<<23) //23:23 ++#define RG_SSUSB_EIDLE_BF_RXDET (0x1<<22) //22:22 ++#define RG_SSUSB_EIDLE_LP_STBCYC (0x1ff<<13) //21:13 ++#define RG_SSUSB_TX_EIDLE_LP_POSTDLY (0x3f<<7) //12:7 ++#define RG_SSUSB_TX_EIDLE_LP_PREDLY (0x3f<<1) //6:1 ++#define RG_SSUSB_TX_EIDLE_LP_EN_ADV (0x1<<0) //0:0 ++ ++//U3D_B2_PHYD_MISC3 ++#define RGS_SSUSB_DDS_CALIB_C_STATE (0x7<<16) //18:16 ++#define RGS_SSUSB_PPERRCNT (0xffff<<0) //15:0 ++ ++//U3D_B2_ROSC_0 ++#define RG_SSUSB_RING_OSC_CNTEND (0x1ff<<23) //31:23 ++#define RG_SSUSB_XTAL_OSC_CNTEND (0x7f<<16) //22:16 ++#define RG_SSUSB_RING_OSC_EN (0x1<<3) //3:3 ++#define RG_SSUSB_RING_OSC_FORCE_EN (0x1<<2) //2:2 ++#define RG_SSUSB_FRC_RING_BYPASS_DET (0x1<<1) //1:1 ++#define RG_SSUSB_RING_BYPASS_DET (0x1<<0) //0:0 ++ ++//U3D_B2_ROSC_1 ++#define RG_SSUSB_RING_OSC_FRC_P3 (0x1<<20) //20:20 ++#define RG_SSUSB_RING_OSC_P3 (0x1<<19) //19:19 ++#define RG_SSUSB_RING_OSC_FRC_RECAL (0x3<<17) //18:17 ++#define RG_SSUSB_RING_OSC_RECAL (0x1<<16) //16:16 ++#define RG_SSUSB_RING_OSC_SEL (0xff<<8) //15:8 ++#define RG_SSUSB_RING_OSC_FRC_SEL (0x1<<0) //0:0 ++ ++//U3D_B2_ROSC_2 ++#define RG_SSUSB_RING_DET_STRCYC2 (0xffff<<16) //31:16 ++#define RG_SSUSB_RING_DET_STRCYC1 (0xffff<<0) //15:0 ++ ++//U3D_B2_ROSC_3 ++#define RG_SSUSB_RING_DET_DETWIN1 (0xffff<<16) //31:16 ++#define RG_SSUSB_RING_DET_STRCYC3 (0xffff<<0) //15:0 ++ ++//U3D_B2_ROSC_4 ++#define RG_SSUSB_RING_DET_DETWIN3 (0xffff<<16) //31:16 ++#define RG_SSUSB_RING_DET_DETWIN2 (0xffff<<0) //15:0 ++ ++//U3D_B2_ROSC_5 ++#define RG_SSUSB_RING_DET_LBOND1 (0xffff<<16) //31:16 ++#define RG_SSUSB_RING_DET_UBOND1 (0xffff<<0) //15:0 ++ ++//U3D_B2_ROSC_6 ++#define RG_SSUSB_RING_DET_LBOND2 (0xffff<<16) //31:16 ++#define RG_SSUSB_RING_DET_UBOND2 (0xffff<<0) //15:0 ++ ++//U3D_B2_ROSC_7 ++#define RG_SSUSB_RING_DET_LBOND3 (0xffff<<16) //31:16 ++#define RG_SSUSB_RING_DET_UBOND3 (0xffff<<0) //15:0 ++ ++//U3D_B2_ROSC_8 ++#define RG_SSUSB_RING_RESERVE (0xffff<<16) //31:16 ++#define RG_SSUSB_ROSC_PROB_SEL (0xf<<2) //5:2 ++#define RG_SSUSB_RING_FREQMETER_EN (0x1<<1) //1:1 ++#define RG_SSUSB_RING_DET_BPS_UBOND (0x1<<0) //0:0 ++ ++//U3D_B2_ROSC_9 ++#define RGS_FM_RING_CNT (0xffff<<16) //31:16 ++#define RGS_SSUSB_RING_OSC_STATE (0x3<<10) //11:10 ++#define RGS_SSUSB_RING_OSC_STABLE (0x1<<9) //9:9 ++#define RGS_SSUSB_RING_OSC_CAL_FAIL (0x1<<8) //8:8 ++#define RGS_SSUSB_RING_OSC_CAL (0xff<<0) //7:0 ++ ++//U3D_B2_ROSC_A ++#define RGS_SSUSB_ROSC_PROB_OUT (0xff<<0) //7:0 ++ ++//U3D_PHYD_VERSION ++#define RGS_SSUSB_PHYD_VERSION (0xffffffff<<0) //31:0 ++ ++//U3D_PHYD_MODEL ++#define RGS_SSUSB_PHYD_MODEL (0xffffffff<<0) //31:0 ++ ++ ++/* OFFSET */ ++ ++//U3D_B2_PHYD_TOP1 ++#define RG_SSUSB_PCIE2_K_EMP_OFST (28) ++#define RG_SSUSB_PCIE2_K_FUL_OFST (24) ++#define RG_SSUSB_TX_EIDLE_LP_EN_OFST (17) ++#define RG_SSUSB_FORCE_TX_EIDLE_LP_EN_OFST (16) ++#define RG_SSUSB_SIGDET_EN_OFST (15) ++#define RG_SSUSB_FORCE_SIGDET_EN_OFST (14) ++#define RG_SSUSB_CLKRX_EN_OFST (13) ++#define RG_SSUSB_FORCE_CLKRX_EN_OFST (12) ++#define RG_SSUSB_CLKTX_EN_OFST (11) ++#define RG_SSUSB_FORCE_CLKTX_EN_OFST (10) ++#define RG_SSUSB_CLK_REQ_N_I_OFST (9) ++#define RG_SSUSB_FORCE_CLK_REQ_N_I_OFST (8) ++#define RG_SSUSB_RATE_OFST (6) ++#define RG_SSUSB_FORCE_RATE_OFST (5) ++#define RG_SSUSB_PCIE_MODE_SEL_OFST (4) ++#define RG_SSUSB_FORCE_PCIE_MODE_SEL_OFST (3) ++#define RG_SSUSB_PHY_MODE_OFST (1) ++#define RG_SSUSB_FORCE_PHY_MODE_OFST (0) ++ ++//U3D_B2_PHYD_TOP2 ++#define RG_SSUSB_FORCE_IDRV_6DB_OFST (30) ++#define RG_SSUSB_IDRV_6DB_OFST (24) ++#define RG_SSUSB_FORCE_IDEM_3P5DB_OFST (22) ++#define RG_SSUSB_IDEM_3P5DB_OFST (16) ++#define RG_SSUSB_FORCE_IDRV_3P5DB_OFST (14) ++#define RG_SSUSB_IDRV_3P5DB_OFST (8) ++#define RG_SSUSB_FORCE_IDRV_0DB_OFST (6) ++#define RG_SSUSB_IDRV_0DB_OFST (0) ++ ++//U3D_B2_PHYD_TOP3 ++#define RG_SSUSB_TX_BIASI_OFST (25) ++#define RG_SSUSB_FORCE_TX_BIASI_EN_OFST (24) ++#define RG_SSUSB_TX_BIASI_EN_OFST (16) ++#define RG_SSUSB_FORCE_TX_BIASI_OFST (13) ++#define RG_SSUSB_FORCE_IDEM_6DB_OFST (8) ++#define RG_SSUSB_IDEM_6DB_OFST (0) ++ ++//U3D_B2_PHYD_TOP4 ++#define RG_SSUSB_G1_CDR_BIC_LTR_OFST (28) ++#define RG_SSUSB_G1_CDR_BIC_LTD0_OFST (24) ++#define RG_SSUSB_G1_CDR_BC_LTD1_OFST (16) ++#define RG_SSUSB_G1_CDR_BC_LTR_OFST (8) ++#define RG_SSUSB_G1_CDR_BC_LTD0_OFST (0) ++ ++//U3D_B2_PHYD_TOP5 ++#define RG_SSUSB_G1_CDR_BIR_LTD1_OFST (24) ++#define RG_SSUSB_G1_CDR_BIR_LTR_OFST (16) ++#define RG_SSUSB_G1_CDR_BIR_LTD0_OFST (8) ++#define RG_SSUSB_G1_CDR_BIC_LTD1_OFST (0) ++ ++//U3D_B2_PHYD_TOP6 ++#define RG_SSUSB_G2_CDR_BIC_LTR_OFST (28) ++#define RG_SSUSB_G2_CDR_BIC_LTD0_OFST (24) ++#define RG_SSUSB_G2_CDR_BC_LTD1_OFST (16) ++#define RG_SSUSB_G2_CDR_BC_LTR_OFST (8) ++#define RG_SSUSB_G2_CDR_BC_LTD0_OFST (0) ++ ++//U3D_B2_PHYD_TOP7 ++#define RG_SSUSB_G2_CDR_BIR_LTD1_OFST (24) ++#define RG_SSUSB_G2_CDR_BIR_LTR_OFST (16) ++#define RG_SSUSB_G2_CDR_BIR_LTD0_OFST (8) ++#define RG_SSUSB_G2_CDR_BIC_LTD1_OFST (0) ++ ++//U3D_B2_PHYD_P_SIGDET1 ++#define RG_SSUSB_P_SIGDET_FLT_DIS_OFST (31) ++#define RG_SSUSB_P_SIGDET_FLT_G2_DEAST_SEL_OFST (24) ++#define RG_SSUSB_P_SIGDET_FLT_G1_DEAST_SEL_OFST (16) ++#define RG_SSUSB_P_SIGDET_FLT_P2_AST_SEL_OFST (8) ++#define RG_SSUSB_P_SIGDET_FLT_PX_AST_SEL_OFST (0) ++ ++//U3D_B2_PHYD_P_SIGDET2 ++#define RG_SSUSB_P_SIGDET_RX_VAL_S_OFST (29) ++#define RG_SSUSB_P_SIGDET_L0S_DEAS_SEL_OFST (28) ++#define RG_SSUSB_P_SIGDET_L0_EXIT_S_OFST (27) ++#define RG_SSUSB_P_SIGDET_L0S_EXIT_T_S_OFST (25) ++#define RG_SSUSB_P_SIGDET_L0S_EXIT_S_OFST (24) ++#define RG_SSUSB_P_SIGDET_L0S_ENTRY_S_OFST (16) ++#define RG_SSUSB_P_SIGDET_PRB_SEL_OFST (10) ++#define RG_SSUSB_P_SIGDET_BK_SIG_T_OFST (8) ++#define RG_SSUSB_P_SIGDET_P2_RXLFPS_OFST (6) ++#define RG_SSUSB_P_SIGDET_NON_BK_AD_OFST (5) ++#define RG_SSUSB_P_SIGDET_BK_B_RXEQ_OFST (4) ++#define RG_SSUSB_P_SIGDET_G2_KO_SEL_OFST (2) ++#define RG_SSUSB_P_SIGDET_G1_KO_SEL_OFST (0) ++ ++//U3D_B2_PHYD_P_SIGDET_CAL1 ++#define RG_SSUSB_P_SIGDET_CAL_OFFSET_OFST (24) ++#define RG_SSUSB_P_FORCE_SIGDET_CAL_OFFSET_OFST (16) ++#define RG_SSUSB_P_SIGDET_CAL_EN_OFST (8) ++#define RG_SSUSB_P_FORCE_SIGDET_CAL_EN_OFST (3) ++#define RG_SSUSB_P_SIGDET_FLT_EN_OFST (2) ++#define RG_SSUSB_P_SIGDET_SAMPLE_PRD_OFST (1) ++#define RG_SSUSB_P_SIGDET_REK_OFST (0) ++ ++//U3D_B2_PHYD_RXDET1 ++#define RG_SSUSB_RXDET_PRB_SEL_OFST (31) ++#define RG_SSUSB_FORCE_CMDET_OFST (30) ++#define RG_SSUSB_RXDET_EN_OFST (29) ++#define RG_SSUSB_FORCE_RXDET_EN_OFST (28) ++#define RG_SSUSB_RXDET_K_TWICE_OFST (27) ++#define RG_SSUSB_RXDET_STB3_SET_OFST (18) ++#define RG_SSUSB_RXDET_STB2_SET_OFST (9) ++#define RG_SSUSB_RXDET_STB1_SET_OFST (0) ++ ++//U3D_B2_PHYD_RXDET2 ++#define RG_SSUSB_PHYD_TRAINDEC_FORCE_CGEN_OFST (31) ++#define RG_SSUSB_PHYD_BERTLB_FORCE_CGEN_OFST (30) ++#define RG_SSUSB_PHYD_T2RLB_FORCE_CGEN_OFST (29) ++#define RG_SSUSB_PDN_T_SEL_OFST (18) ++#define RG_SSUSB_RXDET_STB3_SET_P3_OFST (9) ++#define RG_SSUSB_RXDET_STB2_SET_P3_OFST (0) ++ ++//U3D_B2_PHYD_MISC0 ++#define RG_SSUSB_FORCE_PLL_DDS_HF_EN_OFST (22) ++#define RG_SSUSB_PLL_DDS_HF_EN_MAN_OFST (21) ++#define RG_SSUSB_RXLFPS_ENTXDRV_OFST (20) ++#define RG_SSUSB_RX_FL_UNLOCKTH_OFST (16) ++#define RG_SSUSB_LFPS_PSEL_OFST (15) ++#define RG_SSUSB_RX_SIGDET_EN_OFST (14) ++#define RG_SSUSB_RX_SIGDET_EN_SEL_OFST (13) ++#define RG_SSUSB_RX_PI_CAL_EN_OFST (12) ++#define RG_SSUSB_RX_PI_CAL_EN_SEL_OFST (11) ++#define RG_SSUSB_P3_CLS_CK_SEL_OFST (10) ++#define RG_SSUSB_T2RLB_PSEL_OFST (8) ++#define RG_SSUSB_PPCTL_PSEL_OFST (5) ++#define RG_SSUSB_PHYD_TX_DATA_INV_OFST (4) ++#define RG_SSUSB_BERTLB_PSEL_OFST (2) ++#define RG_SSUSB_RETRACK_DIS_OFST (1) ++#define RG_SSUSB_PPERRCNT_CLR_OFST (0) ++ ++//U3D_B2_PHYD_MISC2 ++#define RG_SSUSB_FRC_PLL_DDS_PREDIV2_OFST (31) ++#define RG_SSUSB_FRC_PLL_DDS_IADJ_OFST (27) ++#define RG_SSUSB_P_SIGDET_125FILTER_OFST (26) ++#define RG_SSUSB_P_SIGDET_RST_FILTER_OFST (25) ++#define RG_SSUSB_P_SIGDET_EID_USE_RAW_OFST (24) ++#define RG_SSUSB_P_SIGDET_LTD_USE_RAW_OFST (23) ++#define RG_SSUSB_EIDLE_BF_RXDET_OFST (22) ++#define RG_SSUSB_EIDLE_LP_STBCYC_OFST (13) ++#define RG_SSUSB_TX_EIDLE_LP_POSTDLY_OFST (7) ++#define RG_SSUSB_TX_EIDLE_LP_PREDLY_OFST (1) ++#define RG_SSUSB_TX_EIDLE_LP_EN_ADV_OFST (0) ++ ++//U3D_B2_PHYD_MISC3 ++#define RGS_SSUSB_DDS_CALIB_C_STATE_OFST (16) ++#define RGS_SSUSB_PPERRCNT_OFST (0) ++ ++//U3D_B2_ROSC_0 ++#define RG_SSUSB_RING_OSC_CNTEND_OFST (23) ++#define RG_SSUSB_XTAL_OSC_CNTEND_OFST (16) ++#define RG_SSUSB_RING_OSC_EN_OFST (3) ++#define RG_SSUSB_RING_OSC_FORCE_EN_OFST (2) ++#define RG_SSUSB_FRC_RING_BYPASS_DET_OFST (1) ++#define RG_SSUSB_RING_BYPASS_DET_OFST (0) ++ ++//U3D_B2_ROSC_1 ++#define RG_SSUSB_RING_OSC_FRC_P3_OFST (20) ++#define RG_SSUSB_RING_OSC_P3_OFST (19) ++#define RG_SSUSB_RING_OSC_FRC_RECAL_OFST (17) ++#define RG_SSUSB_RING_OSC_RECAL_OFST (16) ++#define RG_SSUSB_RING_OSC_SEL_OFST (8) ++#define RG_SSUSB_RING_OSC_FRC_SEL_OFST (0) ++ ++//U3D_B2_ROSC_2 ++#define RG_SSUSB_RING_DET_STRCYC2_OFST (16) ++#define RG_SSUSB_RING_DET_STRCYC1_OFST (0) ++ ++//U3D_B2_ROSC_3 ++#define RG_SSUSB_RING_DET_DETWIN1_OFST (16) ++#define RG_SSUSB_RING_DET_STRCYC3_OFST (0) ++ ++//U3D_B2_ROSC_4 ++#define RG_SSUSB_RING_DET_DETWIN3_OFST (16) ++#define RG_SSUSB_RING_DET_DETWIN2_OFST (0) ++ ++//U3D_B2_ROSC_5 ++#define RG_SSUSB_RING_DET_LBOND1_OFST (16) ++#define RG_SSUSB_RING_DET_UBOND1_OFST (0) ++ ++//U3D_B2_ROSC_6 ++#define RG_SSUSB_RING_DET_LBOND2_OFST (16) ++#define RG_SSUSB_RING_DET_UBOND2_OFST (0) ++ ++//U3D_B2_ROSC_7 ++#define RG_SSUSB_RING_DET_LBOND3_OFST (16) ++#define RG_SSUSB_RING_DET_UBOND3_OFST (0) ++ ++//U3D_B2_ROSC_8 ++#define RG_SSUSB_RING_RESERVE_OFST (16) ++#define RG_SSUSB_ROSC_PROB_SEL_OFST (2) ++#define RG_SSUSB_RING_FREQMETER_EN_OFST (1) ++#define RG_SSUSB_RING_DET_BPS_UBOND_OFST (0) ++ ++//U3D_B2_ROSC_9 ++#define RGS_FM_RING_CNT_OFST (16) ++#define RGS_SSUSB_RING_OSC_STATE_OFST (10) ++#define RGS_SSUSB_RING_OSC_STABLE_OFST (9) ++#define RGS_SSUSB_RING_OSC_CAL_FAIL_OFST (8) ++#define RGS_SSUSB_RING_OSC_CAL_OFST (0) ++ ++//U3D_B2_ROSC_A ++#define RGS_SSUSB_ROSC_PROB_OUT_OFST (0) ++ ++//U3D_PHYD_VERSION ++#define RGS_SSUSB_PHYD_VERSION_OFST (0) ++ ++//U3D_PHYD_MODEL ++#define RGS_SSUSB_PHYD_MODEL_OFST (0) ++ ++ ++/////////////////////////////////////////////////////////////////////////////// ++ ++struct sifslv_chip_reg { ++ PHY_LE32 xtalbias; ++ PHY_LE32 syspll1; ++ PHY_LE32 gpio_ctla; ++ PHY_LE32 gpio_ctlb; ++ PHY_LE32 gpio_ctlc; ++}; ++ ++//U3D_GPIO_CTLA ++#define RG_C60802_GPIO_CTLA (0xffffffff<<0) //31:0 ++ ++//U3D_GPIO_CTLB ++#define RG_C60802_GPIO_CTLB (0xffffffff<<0) //31:0 ++ ++//U3D_GPIO_CTLC ++#define RG_C60802_GPIO_CTLC (0xffffffff<<0) //31:0 ++ ++/* OFFSET */ ++ ++//U3D_GPIO_CTLA ++#define RG_C60802_GPIO_CTLA_OFST (0) ++ ++//U3D_GPIO_CTLB ++#define RG_C60802_GPIO_CTLB_OFST (0) ++ ++//U3D_GPIO_CTLC ++#define RG_C60802_GPIO_CTLC_OFST (0) ++ ++/////////////////////////////////////////////////////////////////////////////// ++ ++struct sifslv_fm_feg { ++ //0x0 ++ PHY_LE32 fmcr0; ++ PHY_LE32 fmcr1; ++ PHY_LE32 fmcr2; ++ PHY_LE32 fmmonr0; ++ //0x10 ++ PHY_LE32 fmmonr1; ++}; ++ ++//U3D_FMCR0 ++#define RG_LOCKTH (0xf<<28) //31:28 ++#define RG_MONCLK_SEL (0x3<<26) //27:26 ++#define RG_FM_MODE (0x1<<25) //25:25 ++#define RG_FREQDET_EN (0x1<<24) //24:24 ++#define RG_CYCLECNT (0xffffff<<0) //23:0 ++ ++//U3D_FMCR1 ++#define RG_TARGET (0xffffffff<<0) //31:0 ++ ++//U3D_FMCR2 ++#define RG_OFFSET (0xffffffff<<0) //31:0 ++ ++//U3D_FMMONR0 ++#define USB_FM_OUT (0xffffffff<<0) //31:0 ++ ++//U3D_FMMONR1 ++#define RG_MONCLK_SEL_3 (0x1<<9) //9:9 ++#define RG_FRCK_EN (0x1<<8) //8:8 ++#define USBPLL_LOCK (0x1<<1) //1:1 ++#define USB_FM_VLD (0x1<<0) //0:0 ++ ++ ++/* OFFSET */ ++ ++//U3D_FMCR0 ++#define RG_LOCKTH_OFST (28) ++#define RG_MONCLK_SEL_OFST (26) ++#define RG_FM_MODE_OFST (25) ++#define RG_FREQDET_EN_OFST (24) ++#define RG_CYCLECNT_OFST (0) ++ ++//U3D_FMCR1 ++#define RG_TARGET_OFST (0) ++ ++//U3D_FMCR2 ++#define RG_OFFSET_OFST (0) ++ ++//U3D_FMMONR0 ++#define USB_FM_OUT_OFST (0) ++ ++//U3D_FMMONR1 ++#define RG_MONCLK_SEL_3_OFST (9) ++#define RG_FRCK_EN_OFST (8) ++#define USBPLL_LOCK_OFST (1) ++#define USB_FM_VLD_OFST (0) ++ ++ ++/////////////////////////////////////////////////////////////////////////////// ++ ++PHY_INT32 phy_init(struct u3phy_info *info); ++PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase); ++PHY_INT32 eyescan_init(struct u3phy_info *info); ++PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y ++ , PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt); ++PHY_INT32 u2_save_cur_en(struct u3phy_info *info); ++PHY_INT32 u2_save_cur_re(struct u3phy_info *info); ++PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info); ++ ++#endif ++#endif +--- /dev/null ++++ b/drivers/usb/host/mtk-phy-ahb.c +@@ -0,0 +1,58 @@ ++#include "mtk-phy.h" ++#ifdef CONFIG_U3D_HAL_SUPPORT ++#include "mu3d_hal_osal.h" ++#endif ++ ++#ifdef CONFIG_U3_PHY_AHB_SUPPORT ++#include <linux/gfp.h> ++#include <linux/kernel.h> ++#include <linux/slab.h> ++ ++#ifndef CONFIG_U3D_HAL_SUPPORT ++#define os_writel(addr,data) {\ ++ (*((volatile PHY_UINT32*)(addr)) = data);\ ++ } ++#define os_readl(addr) *((volatile PHY_UINT32*)(addr)) ++#define os_writelmsk(addr, data, msk) \ ++ { os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk)))); \ ++ } ++#define os_setmsk(addr, msk) \ ++ { os_writel(addr, os_readl(addr) | msk); \ ++ } ++#define os_clrmsk(addr, msk) \ ++ { os_writel(addr, os_readl(addr) &~ msk); \ ++ } ++/*msk the data first, then umsk with the umsk.*/ ++#define os_writelmskumsk(addr, data, msk, umsk) \ ++{\ ++ os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk))) & (umsk));\ ++} ++ ++#endif ++ ++PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data) ++{ ++ os_writel(addr, data); ++ ++ return 0; ++} ++ ++PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr) ++{ ++ return os_readl(addr); ++} ++ ++PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data) ++{ ++ os_writelmsk(addr&0xfffffffc, data<<((addr%4)*8), 0xff<<((addr%4)*8)); ++ ++ return 0; ++} ++ ++PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr) ++{ ++ return ((os_readl(addr)>>((addr%4)*8))&0xff); ++} ++ ++#endif ++ +--- /dev/null ++++ b/drivers/usb/host/mtk-phy.c +@@ -0,0 +1,102 @@ ++#include <linux/gfp.h> ++#include <linux/kernel.h> ++#include <linux/slab.h> ++#define U3_PHY_LIB ++#include "mtk-phy.h" ++#ifdef CONFIG_PROJECT_7621 ++#include "mtk-phy-7621.h" ++#endif ++#ifdef CONFIG_PROJECT_PHY ++static struct u3phy_operator project_operators = { ++ .init = phy_init, ++ .change_pipe_phase = phy_change_pipe_phase, ++ .eyescan_init = eyescan_init, ++ .eyescan = phy_eyescan, ++ .u2_slew_rate_calibration = u2_slew_rate_calibration, ++}; ++#endif ++ ++ ++PHY_INT32 u3phy_init(){ ++#ifndef CONFIG_PROJECT_PHY ++ PHY_INT32 u3phy_version; ++#endif ++ ++ if(u3phy != NULL){ ++ return PHY_TRUE; ++ } ++ ++ u3phy = kmalloc(sizeof(struct u3phy_info), GFP_NOIO); ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ u3phy_p1 = kmalloc(sizeof(struct u3phy_info), GFP_NOIO); ++#endif ++#ifdef CONFIG_U3_PHY_GPIO_SUPPORT ++ u3phy->phyd_version_addr = 0x2000e4; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ u3phy_p1->phyd_version_addr = 0x2000e4; ++#endif ++#else ++ u3phy->phyd_version_addr = U3_PHYD_B2_BASE + 0xe4; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ u3phy_p1->phyd_version_addr = U3_PHYD_B2_BASE_P1 + 0xe4; ++#endif ++#endif ++ ++#ifdef CONFIG_PROJECT_PHY ++ ++ u3phy->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE; ++ u3phy->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE; ++ u3phy->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE; ++ u3phy->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE; ++ u3phy->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE; ++ u3phy->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE; ++ u3phy->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE; ++ u3phy_ops = &project_operators; ++ ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ u3phy_p1->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE_P1; ++ u3phy_p1->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE_P1; ++ u3phy_p1->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE_P1; ++ u3phy_p1->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE_P1; ++ u3phy_p1->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE_P1; ++ u3phy_p1->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE; ++ u3phy_p1->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE; ++#endif ++#endif ++ ++ return PHY_TRUE; ++} ++ ++PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){ ++ PHY_INT8 cur_value; ++ PHY_INT8 new_value; ++ ++ cur_value = U3PhyReadReg8(addr); ++ new_value = (cur_value & (~mask)) | (value << offset); ++ //udelay(i2cdelayus); ++ U3PhyWriteReg8(addr, new_value); ++ return PHY_TRUE; ++} ++ ++PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){ ++ PHY_INT32 cur_value; ++ PHY_INT32 new_value; ++ ++ cur_value = U3PhyReadReg32(addr); ++ new_value = (cur_value & (~mask)) | ((value << offset) & mask); ++ U3PhyWriteReg32(addr, new_value); ++ //DRV_MDELAY(100); ++ ++ return PHY_TRUE; ++} ++ ++PHY_INT32 U3PhyReadField8(PHY_INT32 addr,PHY_INT32 offset,PHY_INT32 mask){ ++ ++ return ((U3PhyReadReg8(addr) & mask) >> offset); ++} ++ ++PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask){ ++ ++ return ((U3PhyReadReg32(addr) & mask) >> offset); ++} ++ +--- /dev/null ++++ b/drivers/usb/host/mtk-phy.h +@@ -0,0 +1,179 @@ ++#ifndef __MTK_PHY_NEW_H ++#define __MTK_PHY_NEW_H ++ ++//#define CONFIG_U3D_HAL_SUPPORT ++ ++/* include system library */ ++#include <linux/gfp.h> ++#include <linux/kernel.h> ++#include <linux/slab.h> ++#include <linux/delay.h> ++ ++/* Choose PHY R/W implementation */ ++//#define CONFIG_U3_PHY_GPIO_SUPPORT //SW I2C implemented by GPIO ++#define CONFIG_U3_PHY_AHB_SUPPORT //AHB, only on SoC ++ ++/* Choose PHY version */ ++//Select your project by defining one of the followings ++#define CONFIG_PROJECT_7621 //7621 ++#define CONFIG_PROJECT_PHY ++ ++/* BASE ADDRESS DEFINE, should define this on ASIC */ ++#define PHY_BASE 0xBE1D0000 ++#define SIFSLV_FM_FEG_BASE (PHY_BASE+0x100) ++#define SIFSLV_CHIP_BASE (PHY_BASE+0x700) ++#define U2_PHY_BASE (PHY_BASE+0x800) ++#define U3_PHYD_BASE (PHY_BASE+0x900) ++#define U3_PHYD_B2_BASE (PHY_BASE+0xa00) ++#define U3_PHYA_BASE (PHY_BASE+0xb00) ++#define U3_PHYA_DA_BASE (PHY_BASE+0xc00) ++ ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++#define SIFSLV_FM_FEG_BASE_P1 (PHY_BASE+0x100) ++#define SIFSLV_CHIP_BASE_P1 (PHY_BASE+0x700) ++#define U2_PHY_BASE_P1 (PHY_BASE+0x1000) ++#define U3_PHYD_BASE_P1 (PHY_BASE+0x1100) ++#define U3_PHYD_B2_BASE_P1 (PHY_BASE+0x1200) ++#define U3_PHYA_BASE_P1 (PHY_BASE+0x1300) ++#define U3_PHYA_DA_BASE_P1 (PHY_BASE+0x1400) ++#endif ++ ++/* ++ ++0x00000100 MODULE ssusb_sifslv_fmreg ssusb_sifslv_fmreg ++0x00000700 MODULE ssusb_sifslv_ippc ssusb_sifslv_ippc ++0x00000800 MODULE ssusb_sifslv_u2phy_com ssusb_sifslv_u2_phy_com_T28 ++0x00000900 MODULE ssusb_sifslv_u3phyd ssusb_sifslv_u3phyd_T28 ++0x00000a00 MODULE ssusb_sifslv_u3phyd_bank2 ssusb_sifslv_u3phyd_bank2_T28 ++0x00000b00 MODULE ssusb_sifslv_u3phya ssusb_sifslv_u3phya_T28 ++0x00000c00 MODULE ssusb_sifslv_u3phya_da ssusb_sifslv_u3phya_da_T28 ++*/ ++ ++ ++/* TYPE DEFINE */ ++typedef unsigned int PHY_UINT32; ++typedef int PHY_INT32; ++typedef unsigned short PHY_UINT16; ++typedef short PHY_INT16; ++typedef unsigned char PHY_UINT8; ++typedef char PHY_INT8; ++ ++typedef PHY_UINT32 __bitwise PHY_LE32; ++ ++/* CONSTANT DEFINE */ ++#define PHY_FALSE 0 ++#define PHY_TRUE 1 ++ ++/* MACRO DEFINE */ ++#define DRV_WriteReg32(addr,data) ((*(volatile PHY_UINT32 *)(addr)) = (unsigned long)(data)) ++#define DRV_Reg32(addr) (*(volatile PHY_UINT32 *)(addr)) ++ ++#define DRV_MDELAY mdelay ++#define DRV_MSLEEP msleep ++#define DRV_UDELAY udelay ++#define DRV_USLEEP usleep ++ ++/* PHY FUNCTION DEFINE, implemented in platform files, ex. ahb, gpio */ ++PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data); ++PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr); ++PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data); ++PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr); ++ ++/* PHY GENERAL USAGE FUNC, implemented in mtk-phy.c */ ++PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value); ++PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value); ++PHY_INT32 U3PhyReadField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask); ++PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask); ++ ++struct u3phy_info { ++ PHY_INT32 phy_version; ++ PHY_INT32 phyd_version_addr; ++ ++#ifdef CONFIG_PROJECT_PHY ++ struct u2phy_reg *u2phy_regs; ++ struct u3phya_reg *u3phya_regs; ++ struct u3phya_da_reg *u3phya_da_regs; ++ struct u3phyd_reg *u3phyd_regs; ++ struct u3phyd_bank2_reg *u3phyd_bank2_regs; ++ struct sifslv_chip_reg *sifslv_chip_regs; ++ struct sifslv_fm_feg *sifslv_fm_regs; ++#endif ++}; ++ ++struct u3phy_operator { ++ PHY_INT32 (*init) (struct u3phy_info *info); ++ PHY_INT32 (*change_pipe_phase) (struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase); ++ PHY_INT32 (*eyescan_init) (struct u3phy_info *info); ++ PHY_INT32 (*eyescan) (struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y, PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt); ++ PHY_INT32 (*u2_save_current_entry) (struct u3phy_info *info); ++ PHY_INT32 (*u2_save_current_recovery) (struct u3phy_info *info); ++ PHY_INT32 (*u2_slew_rate_calibration) (struct u3phy_info *info); ++}; ++ ++#ifdef U3_PHY_LIB ++#define AUTOEXT ++#else ++#define AUTOEXT extern ++#endif ++ ++AUTOEXT struct u3phy_info *u3phy; ++AUTOEXT struct u3phy_info *u3phy_p1; ++AUTOEXT struct u3phy_operator *u3phy_ops; ++ ++/*********eye scan required*********/ ++ ++#define LO_BYTE(x) ((PHY_UINT8)((x) & 0xFF)) ++#define HI_BYTE(x) ((PHY_UINT8)(((x) & 0xFF00) >> 8)) ++ ++typedef enum ++{ ++ SCAN_UP, ++ SCAN_DN ++} enumScanDir; ++ ++struct strucScanRegion ++{ ++ PHY_INT8 bX_tl; ++ PHY_INT8 bY_tl; ++ PHY_INT8 bX_br; ++ PHY_INT8 bY_br; ++ PHY_INT8 bDeltaX; ++ PHY_INT8 bDeltaY; ++}; ++ ++struct strucTestCycle ++{ ++ PHY_UINT16 wEyeCnt; ++ PHY_INT8 bNumOfEyeCnt; ++ PHY_INT8 bPICalEn; ++ PHY_INT8 bNumOfIgnoreCnt; ++}; ++ ++#define ERRCNT_MAX 128 ++#define CYCLE_COUNT_MAX 15 ++ ++/// the map resolution is 128 x 128 pts ++#define MAX_X 127 ++#define MAX_Y 127 ++#define MIN_X 0 ++#define MIN_Y 0 ++ ++PHY_INT32 u3phy_init(void); ++ ++AUTOEXT struct strucScanRegion _rEye1; ++AUTOEXT struct strucScanRegion _rEye2; ++AUTOEXT struct strucTestCycle _rTestCycle; ++AUTOEXT PHY_UINT8 _bXcurr; ++AUTOEXT PHY_UINT8 _bYcurr; ++AUTOEXT enumScanDir _eScanDir; ++AUTOEXT PHY_INT8 _fgXChged; ++AUTOEXT PHY_INT8 _bPIResult; ++/* use local variable instead to save memory use */ ++#if 0 ++AUTOEXT PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX]; ++AUTOEXT PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX]; ++#endif ++ ++/***********************************/ ++#endif ++ +--- a/drivers/usb/host/pci-quirks.h ++++ b/drivers/usb/host/pci-quirks.h +@@ -1,7 +1,7 @@ + #ifndef __LINUX_USB_PCI_QUIRKS_H + #define __LINUX_USB_PCI_QUIRKS_H + +-#ifdef CONFIG_PCI ++#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + void uhci_reset_hc(struct pci_dev *pdev, unsigned long base); + int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base); + #endif /* CONFIG_PCI */ +--- a/drivers/usb/host/xhci-dbg.c ++++ b/drivers/usb/host/xhci-dbg.c +@@ -21,6 +21,9 @@ + */ + + #include "xhci.h" ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++#include "xhci-mtk.h" ++#endif + + #define XHCI_INIT_VALUE 0x0 + +--- a/drivers/usb/host/xhci-mem.c ++++ b/drivers/usb/host/xhci-mem.c +@@ -67,6 +67,9 @@ + + static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg) + { ++ if (!seg) ++ return; ++ + if (seg->trbs) { + dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma); + seg->trbs = NULL; +@@ -1475,9 +1478,17 @@ + max_burst = (usb_endpoint_maxp(&ep->desc) + & 0x1800) >> 11; + } ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc)) ++ max_packet += 2; ++#endif + break; + case USB_SPEED_FULL: + case USB_SPEED_LOW: ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc)) ++ max_packet += 2; ++#endif + break; + default: + BUG(); +--- /dev/null ++++ b/drivers/usb/host/xhci-mtk-power.c +@@ -0,0 +1,115 @@ ++#include "xhci-mtk.h" ++#include "xhci-mtk-power.h" ++#include "xhci.h" ++#include <linux/kernel.h> /* printk() */ ++#include <linux/slab.h> ++#include <linux/delay.h> ++ ++static int g_num_u3_port; ++static int g_num_u2_port; ++ ++ ++void enableXhciAllPortPower(struct xhci_hcd *xhci){ ++ int i; ++ u32 port_id, temp; ++ u32 __iomem *addr; ++ ++ g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP)); ++ g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP)); ++ ++ for(i=1; i<=g_num_u3_port; i++){ ++ port_id=i; ++ addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff); ++ temp = readl(addr); ++ temp = xhci_port_state_to_neutral(temp); ++ temp |= PORT_POWER; ++ writel(temp, addr); ++ } ++ for(i=1; i<=g_num_u2_port; i++){ ++ port_id=i+g_num_u3_port; ++ addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff); ++ temp = readl(addr); ++ temp = xhci_port_state_to_neutral(temp); ++ temp |= PORT_POWER; ++ writel(temp, addr); ++ } ++} ++ ++void enableAllClockPower(){ ++ ++ int i; ++ u32 temp; ++ ++ g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP)); ++ g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP)); ++ ++ //2. Enable xHC ++ writel(readl(SSUSB_IP_PW_CTRL) | (SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL); ++ writel(readl(SSUSB_IP_PW_CTRL) & (~SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL); ++ writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1); ++ ++ //1. Enable target ports ++ for(i=0; i<g_num_u3_port; i++){ ++ temp = readl(SSUSB_U3_CTRL(i)); ++ temp = temp & (~SSUSB_U3_PORT_PDN) & (~SSUSB_U3_PORT_DIS); ++ writel(temp, SSUSB_U3_CTRL(i)); ++ } ++ for(i=0; i<g_num_u2_port; i++){ ++ temp = readl(SSUSB_U2_CTRL(i)); ++ temp = temp & (~SSUSB_U2_PORT_PDN) & (~SSUSB_U2_PORT_DIS); ++ writel(temp, SSUSB_U2_CTRL(i)); ++ } ++ msleep(100); ++} ++ ++ ++//(X)disable clock/power of a port ++//(X)if all ports are disabled, disable IP ctrl power ++//disable all ports and IP clock/power, this is just mention HW that the power/clock of port ++//and IP could be disable if suspended. ++//If doesn't not disable all ports at first, the IP clock/power will never be disabled ++//(some U2 and U3 ports are binded to the same connection, that is, they will never enter suspend at the same time ++//port_index: port number ++//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed) ++void disablePortClockPower(void){ ++ int i; ++ u32 temp; ++ ++ g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP)); ++ g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP)); ++ ++ for(i=0; i<g_num_u3_port; i++){ ++ temp = readl(SSUSB_U3_CTRL(i)); ++ temp = temp | (SSUSB_U3_PORT_PDN); ++ writel(temp, SSUSB_U3_CTRL(i)); ++ } ++ for(i=0; i<g_num_u2_port; i++){ ++ temp = readl(SSUSB_U2_CTRL(i)); ++ temp = temp | (SSUSB_U2_PORT_PDN); ++ writel(temp, SSUSB_U2_CTRL(i)); ++ } ++ writel(readl(SSUSB_IP_PW_CTRL_1) | (SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1); ++} ++ ++//if IP ctrl power is disabled, enable it ++//enable clock/power of a port ++//port_index: port number ++//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed) ++void enablePortClockPower(int port_index, int port_rev){ ++ int i; ++ u32 temp; ++ ++ writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1); ++ ++ if(port_rev == 0x3){ ++ temp = readl(SSUSB_U3_CTRL(port_index)); ++ temp = temp & (~SSUSB_U3_PORT_PDN); ++ writel(temp, SSUSB_U3_CTRL(port_index)); ++ } ++ else if(port_rev == 0x2){ ++ temp = readl(SSUSB_U2_CTRL(port_index)); ++ temp = temp & (~SSUSB_U2_PORT_PDN); ++ writel(temp, SSUSB_U2_CTRL(port_index)); ++ } ++} ++ +--- /dev/null ++++ b/drivers/usb/host/xhci-mtk-power.h +@@ -0,0 +1,13 @@ ++#ifndef _XHCI_MTK_POWER_H ++#define _XHCI_MTK_POWER_H ++ ++#include <linux/usb.h> ++#include "xhci.h" ++#include "xhci-mtk.h" ++ ++void enableXhciAllPortPower(struct xhci_hcd *xhci); ++void enableAllClockPower(void); ++void disablePortClockPower(void); ++void enablePortClockPower(int port_index, int port_rev); ++ ++#endif +--- /dev/null ++++ b/drivers/usb/host/xhci-mtk-scheduler.c +@@ -0,0 +1,608 @@ ++#include "xhci-mtk-scheduler.h" ++#include <linux/kernel.h> /* printk() */ ++ ++static struct sch_ep **ss_out_eps[MAX_EP_NUM]; ++static struct sch_ep **ss_in_eps[MAX_EP_NUM]; ++static struct sch_ep **hs_eps[MAX_EP_NUM]; //including tt isoc ++static struct sch_ep **tt_intr_eps[MAX_EP_NUM]; ++ ++ ++int mtk_xhci_scheduler_init(void){ ++ int i; ++ ++ for(i=0; i<MAX_EP_NUM; i++){ ++ ss_out_eps[i] = NULL; ++ } ++ for(i=0; i<MAX_EP_NUM; i++){ ++ ss_in_eps[i] = NULL; ++ } ++ for(i=0; i<MAX_EP_NUM; i++){ ++ hs_eps[i] = NULL; ++ } ++ for(i=0; i<MAX_EP_NUM; i++){ ++ tt_intr_eps[i] = NULL; ++ } ++ return 0; ++} ++ ++int add_sch_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst ++ , int mult, int offset, int repeat, int pkts, int cs_count, int burst_mode ++ , int bw_cost, mtk_u32 *ep, struct sch_ep *tmp_ep){ ++ ++ struct sch_ep **ep_array; ++ int i; ++ ++ if(is_in && dev_speed == USB_SPEED_SUPER ){ ++ ep_array = (struct sch_ep **)ss_in_eps; ++ } ++ else if(dev_speed == USB_SPEED_SUPER){ ++ ep_array = (struct sch_ep **)ss_out_eps; ++ } ++ else if(dev_speed == USB_SPEED_HIGH || (isTT && ep_type == USB_EP_ISOC)){ ++ ep_array = (struct sch_ep **)hs_eps; ++ } ++ else{ ++ ep_array = (struct sch_ep **)tt_intr_eps; ++ } ++ for(i=0; i<MAX_EP_NUM; i++){ ++ if(ep_array[i] == NULL){ ++ tmp_ep->dev_speed = dev_speed; ++ tmp_ep->isTT = isTT; ++ tmp_ep->is_in = is_in; ++ tmp_ep->ep_type = ep_type; ++ tmp_ep->maxp = maxp; ++ tmp_ep->interval = interval; ++ tmp_ep->burst = burst; ++ tmp_ep->mult = mult; ++ tmp_ep->offset = offset; ++ tmp_ep->repeat = repeat; ++ tmp_ep->pkts = pkts; ++ tmp_ep->cs_count = cs_count; ++ tmp_ep->burst_mode = burst_mode; ++ tmp_ep->bw_cost = bw_cost; ++ tmp_ep->ep = ep; ++ ep_array[i] = tmp_ep; ++ return SCH_SUCCESS; ++ } ++ } ++ return SCH_FAIL; ++} ++ ++int count_ss_bw(int is_in, int ep_type, int maxp, int interval, int burst, int mult, int offset, int repeat ++ , int td_size){ ++ int i, j, k; ++ int bw_required[3]; ++ int final_bw_required; ++ int bw_required_per_repeat; ++ int tmp_bw_required; ++ struct sch_ep *cur_sch_ep; ++ struct sch_ep **ep_array; ++ int cur_offset; ++ int cur_ep_offset; ++ int tmp_offset; ++ int tmp_interval; ++ int ep_offset; ++ int ep_interval; ++ int ep_repeat; ++ int ep_mult; ++ ++ if(is_in){ ++ ep_array = (struct sch_ep **)ss_in_eps; ++ } ++ else{ ++ ep_array = (struct sch_ep **)ss_out_eps; ++ } ++ ++ bw_required[0] = 0; ++ bw_required[1] = 0; ++ bw_required[2] = 0; ++ ++ if(repeat == 0){ ++ final_bw_required = 0; ++ for(i=0; i<MAX_EP_NUM; i++){ ++ cur_sch_ep = ep_array[i]; ++ if(cur_sch_ep == NULL){ ++ continue; ++ } ++ ep_interval = cur_sch_ep->interval; ++ ep_offset = cur_sch_ep->offset; ++ if(cur_sch_ep->repeat == 0){ ++ if(ep_interval >= interval){ ++ tmp_offset = ep_offset + ep_interval - offset; ++ tmp_interval = interval; ++ } ++ else{ ++ tmp_offset = offset + interval - ep_offset; ++ tmp_interval = ep_interval; ++ } ++ if(tmp_offset % tmp_interval == 0){ ++ final_bw_required += cur_sch_ep->bw_cost; ++ } ++ } ++ else{ ++ ep_repeat = cur_sch_ep->repeat; ++ ep_mult = cur_sch_ep->mult; ++ for(k=0; k<=ep_mult; k++){ ++ cur_ep_offset = ep_offset+(k*ep_mult); ++ if(ep_interval >= interval){ ++ tmp_offset = cur_ep_offset + ep_interval - offset; ++ tmp_interval = interval; ++ } ++ else{ ++ tmp_offset = offset + interval - cur_ep_offset; ++ tmp_interval = ep_interval; ++ } ++ if(tmp_offset % tmp_interval == 0){ ++ final_bw_required += cur_sch_ep->bw_cost; ++ break; ++ } ++ } ++ } ++ } ++ final_bw_required += td_size; ++ } ++ else{ ++ bw_required_per_repeat = maxp * (burst+1); ++ for(j=0; j<=mult; j++){ ++ tmp_bw_required = 0; ++ cur_offset = offset+(j*repeat); ++ for(i=0; i<MAX_EP_NUM; i++){ ++ cur_sch_ep = ep_array[i]; ++ if(cur_sch_ep == NULL){ ++ continue; ++ } ++ ep_interval = cur_sch_ep->interval; ++ ep_offset = cur_sch_ep->offset; ++ if(cur_sch_ep->repeat == 0){ ++ if(ep_interval >= interval){ ++ tmp_offset = ep_offset + ep_interval - cur_offset; ++ tmp_interval = interval; ++ } ++ else{ ++ tmp_offset = cur_offset + interval - ep_offset; ++ tmp_interval = ep_interval; ++ } ++ if(tmp_offset % tmp_interval == 0){ ++ tmp_bw_required += cur_sch_ep->bw_cost; ++ } ++ } ++ else{ ++ ep_repeat = cur_sch_ep->repeat; ++ ep_mult = cur_sch_ep->mult; ++ for(k=0; k<=ep_mult; k++){ ++ cur_ep_offset = ep_offset+(k*ep_repeat); ++ if(ep_interval >= interval){ ++ tmp_offset = cur_ep_offset + ep_interval - cur_offset; ++ tmp_interval = interval; ++ } ++ else{ ++ tmp_offset = cur_offset + interval - cur_ep_offset; ++ tmp_interval = ep_interval; ++ } ++ if(tmp_offset % tmp_interval == 0){ ++ tmp_bw_required += cur_sch_ep->bw_cost; ++ break; ++ } ++ } ++ } ++ } ++ bw_required[j] = tmp_bw_required; ++ } ++ final_bw_required = SS_BW_BOUND; ++ for(j=0; j<=mult; j++){ ++ if(bw_required[j] < final_bw_required){ ++ final_bw_required = bw_required[j]; ++ } ++ } ++ final_bw_required += bw_required_per_repeat; ++ } ++ return final_bw_required; ++} ++ ++int count_hs_bw(int ep_type, int maxp, int interval, int offset, int td_size){ ++ int i; ++ int bw_required; ++ struct sch_ep *cur_sch_ep; ++ int tmp_offset; ++ int tmp_interval; ++ int ep_offset; ++ int ep_interval; ++ int cur_tt_isoc_interval; //for isoc tt check ++ ++ bw_required = 0; ++ for(i=0; i<MAX_EP_NUM; i++){ ++ ++ cur_sch_ep = (struct sch_ep *)hs_eps[i]; ++ if(cur_sch_ep == NULL){ ++ continue; ++ } ++ ep_offset = cur_sch_ep->offset; ++ ep_interval = cur_sch_ep->interval; ++ ++ if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){ ++ cur_tt_isoc_interval = ep_interval<<3; ++ if(ep_interval >= interval){ ++ tmp_offset = ep_offset + cur_tt_isoc_interval - offset; ++ tmp_interval = interval; ++ } ++ else{ ++ tmp_offset = offset + interval - ep_offset; ++ tmp_interval = cur_tt_isoc_interval; ++ } ++ if(cur_sch_ep->is_in){ ++ if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){ ++ bw_required += 188; ++ } ++ } ++ else{ ++ if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){ ++ bw_required += 188; ++ } ++ } ++ } ++ else{ ++ if(ep_interval >= interval){ ++ tmp_offset = ep_offset + ep_interval - offset; ++ tmp_interval = interval; ++ } ++ else{ ++ tmp_offset = offset + interval - ep_offset; ++ tmp_interval = ep_interval; ++ } ++ if(tmp_offset%tmp_interval == 0){ ++ bw_required += cur_sch_ep->bw_cost; ++ } ++ } ++ } ++ bw_required += td_size; ++ return bw_required; ++} ++ ++int count_tt_isoc_bw(int is_in, int maxp, int interval, int offset, int td_size){ ++ char is_cs; ++ int mframe_idx, frame_idx, s_frame, s_mframe, cur_mframe; ++ int bw_required, max_bw; ++ int ss_cs_count; ++ int cs_mframe; ++ int max_frame; ++ int i,j; ++ struct sch_ep *cur_sch_ep; ++ int ep_offset; ++ int ep_interval; ++ int ep_cs_count; ++ int tt_isoc_interval; //for isoc tt check ++ int cur_tt_isoc_interval; //for isoc tt check ++ int tmp_offset; ++ int tmp_interval; ++ ++ is_cs = 0; ++ ++ tt_isoc_interval = interval<<3; //frame to mframe ++ if(is_in){ ++ is_cs = 1; ++ } ++ s_frame = offset/8; ++ s_mframe = offset%8; ++ ss_cs_count = (maxp + (188 - 1))/188; ++ if(is_cs){ ++ cs_mframe = offset%8 + 2 + ss_cs_count; ++ if (cs_mframe <= 6) ++ ss_cs_count += 2; ++ else if (cs_mframe == 7) ++ ss_cs_count++; ++ else if (cs_mframe > 8) ++ return -1; ++ } ++ max_bw = 0; ++ if(is_in){ ++ i=2; ++ } ++ for(cur_mframe = offset+i; i<ss_cs_count; cur_mframe++, i++){ ++ bw_required = 0; ++ for(j=0; j<MAX_EP_NUM; j++){ ++ cur_sch_ep = (struct sch_ep *)hs_eps[j]; ++ if(cur_sch_ep == NULL){ ++ continue; ++ } ++ ep_offset = cur_sch_ep->offset; ++ ep_interval = cur_sch_ep->interval; ++ if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){ ++ //isoc tt ++ //check if mframe offset overlap ++ //if overlap, add 188 to the bw ++ cur_tt_isoc_interval = ep_interval<<3; ++ if(cur_tt_isoc_interval >= tt_isoc_interval){ ++ tmp_offset = (ep_offset+cur_tt_isoc_interval) - cur_mframe; ++ tmp_interval = tt_isoc_interval; ++ } ++ else{ ++ tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset; ++ tmp_interval = cur_tt_isoc_interval; ++ } ++ if(cur_sch_ep->is_in){ ++ if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){ ++ bw_required += 188; ++ } ++ } ++ else{ ++ if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){ ++ bw_required += 188; ++ } ++ } ++ ++ } ++ else if(cur_sch_ep->ep_type == USB_EP_INT || cur_sch_ep->ep_type == USB_EP_ISOC){ ++ //check if mframe ++ if(ep_interval >= tt_isoc_interval){ ++ tmp_offset = (ep_offset+ep_interval) - cur_mframe; ++ tmp_interval = tt_isoc_interval; ++ } ++ else{ ++ tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset; ++ tmp_interval = ep_interval; ++ } ++ if(tmp_offset%tmp_interval == 0){ ++ bw_required += cur_sch_ep->bw_cost; ++ } ++ } ++ } ++ bw_required += 188; ++ if(bw_required > max_bw){ ++ max_bw = bw_required; ++ } ++ } ++ return max_bw; ++} ++ ++int count_tt_intr_bw(int interval, int frame_offset){ ++ //check all eps in tt_intr_eps ++ int ret; ++ int i,j; ++ int ep_offset; ++ int ep_interval; ++ int tmp_offset; ++ int tmp_interval; ++ ret = SCH_SUCCESS; ++ struct sch_ep *cur_sch_ep; ++ ++ for(i=0; i<MAX_EP_NUM; i++){ ++ cur_sch_ep = (struct sch_ep *)tt_intr_eps[i]; ++ if(cur_sch_ep == NULL){ ++ continue; ++ } ++ ep_offset = cur_sch_ep->offset; ++ ep_interval = cur_sch_ep->interval; ++ if(ep_interval >= interval){ ++ tmp_offset = ep_offset + ep_interval - frame_offset; ++ tmp_interval = interval; ++ } ++ else{ ++ tmp_offset = frame_offset + interval - ep_offset; ++ tmp_interval = ep_interval; ++ } ++ ++ if(tmp_offset%tmp_interval==0){ ++ return SCH_FAIL; ++ } ++ } ++ return SCH_SUCCESS; ++} ++ ++struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep){ ++ int i; ++ struct sch_ep **ep_array; ++ struct sch_ep *cur_ep; ++ ++ if (is_in && dev_speed == USB_SPEED_SUPER) { ++ ep_array = (struct sch_ep **)ss_in_eps; ++ } ++ else if (dev_speed == USB_SPEED_SUPER) { ++ ep_array = (struct sch_ep **)ss_out_eps; ++ } ++ else if (dev_speed == USB_SPEED_HIGH || (isTT && ep_type == USB_EP_ISOC)) { ++ ep_array = (struct sch_ep **)hs_eps; ++ } ++ else { ++ ep_array = (struct sch_ep **)tt_intr_eps; ++ } ++ for (i = 0; i < MAX_EP_NUM; i++) { ++ cur_ep = (struct sch_ep *)ep_array[i]; ++ if(cur_ep != NULL && cur_ep->ep == ep){ ++ ep_array[i] = NULL; ++ return cur_ep; ++ } ++ } ++ return NULL; ++} ++ ++int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst ++ , int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep){ ++ mtk_u32 bPkts = 0; ++ mtk_u32 bCsCount = 0; ++ mtk_u32 bBm = 1; ++ mtk_u32 bOffset = 0; ++ mtk_u32 bRepeat = 0; ++ int ret; ++ struct mtk_xhci_ep_ctx *temp_ep_ctx; ++ int td_size; ++ int mframe_idx, frame_idx; ++ int bw_cost; ++ int cur_bw, best_bw, best_bw_idx,repeat, max_repeat, best_bw_repeat; ++ int cur_offset, cs_mframe; ++ int break_out; ++ int frame_interval; ++ ++ printk(KERN_ERR "add_ep parameters, dev_speed %d, is_in %d, isTT %d, ep_type %d, maxp %d, interval %d, burst %d, mult %d, ep 0x%x, ep_ctx 0x%x, sch_ep 0x%x\n", dev_speed, is_in, isTT, ep_type, maxp ++ , interval, burst, mult, ep, ep_ctx, sch_ep); ++ if(isTT && ep_type == USB_EP_INT && ((dev_speed == USB_SPEED_LOW) || (dev_speed == USB_SPEED_FULL))){ ++ frame_interval = interval >> 3; ++ for(frame_idx=0; frame_idx<frame_interval; frame_idx++){ ++ printk(KERN_ERR "check tt_intr_bw interval %d, frame_idx %d\n", frame_interval, frame_idx); ++ if(count_tt_intr_bw(frame_interval, frame_idx) == SCH_SUCCESS){ ++ printk(KERN_ERR "check OK............\n"); ++ bOffset = frame_idx<<3; ++ bPkts = 1; ++ bCsCount = 3; ++ bw_cost = maxp; ++ bRepeat = 0; ++ if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, frame_interval, burst, mult ++ , bOffset, bRepeat, bPkts, bCsCount, bBm, maxp, ep, sch_ep) == SCH_FAIL){ ++ return SCH_FAIL; ++ } ++ ret = SCH_SUCCESS; ++ break; ++ } ++ } ++ } ++ else if(isTT && ep_type == USB_EP_ISOC){ ++ best_bw = HS_BW_BOUND; ++ best_bw_idx = -1; ++ cur_bw = 0; ++ td_size = maxp; ++ break_out = 0; ++ frame_interval = interval>>3; ++ for(frame_idx=0; frame_idx<frame_interval && !break_out; frame_idx++){ ++ for(mframe_idx=0; mframe_idx<8; mframe_idx++){ ++ cur_offset = (frame_idx*8) + mframe_idx; ++ cur_bw = count_tt_isoc_bw(is_in, maxp, frame_interval, cur_offset, td_size); ++ if(cur_bw > 0 && cur_bw < best_bw){ ++ best_bw_idx = cur_offset; ++ best_bw = cur_bw; ++ if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){ ++ break_out = 1; ++ break; ++ } ++ } ++ } ++ } ++ if(best_bw_idx == -1){ ++ return SCH_FAIL; ++ } ++ else{ ++ bOffset = best_bw_idx; ++ bPkts = 1; ++ bCsCount = (maxp + (188 - 1)) / 188; ++ if(is_in){ ++ cs_mframe = bOffset%8 + 2 + bCsCount; ++ if (cs_mframe <= 6) ++ bCsCount += 2; ++ else if (cs_mframe == 7) ++ bCsCount++; ++ } ++ bw_cost = 188; ++ bRepeat = 0; ++ if(add_sch_ep( dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult ++ , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){ ++ return SCH_FAIL; ++ } ++ ret = SCH_SUCCESS; ++ } ++ } ++ else if((dev_speed == USB_SPEED_FULL || dev_speed == USB_SPEED_LOW) && ep_type == USB_EP_INT){ ++ bPkts = 1; ++ ret = SCH_SUCCESS; ++ } ++ else if(dev_speed == USB_SPEED_FULL && ep_type == USB_EP_ISOC){ ++ bPkts = 1; ++ ret = SCH_SUCCESS; ++ } ++ else if(dev_speed == USB_SPEED_HIGH && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){ ++ best_bw = HS_BW_BOUND; ++ best_bw_idx = -1; ++ cur_bw = 0; ++ td_size = maxp*(burst+1); ++ for(cur_offset = 0; cur_offset<interval; cur_offset++){ ++ cur_bw = count_hs_bw(ep_type, maxp, interval, cur_offset, td_size); ++ if(cur_bw > 0 && cur_bw < best_bw){ ++ best_bw_idx = cur_offset; ++ best_bw = cur_bw; ++ if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){ ++ break; ++ } ++ } ++ } ++ if(best_bw_idx == -1){ ++ return SCH_FAIL; ++ } ++ else{ ++ bOffset = best_bw_idx; ++ bPkts = burst + 1; ++ bCsCount = 0; ++ bw_cost = td_size; ++ bRepeat = 0; ++ if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult ++ , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){ ++ return SCH_FAIL; ++ } ++ ret = SCH_SUCCESS; ++ } ++ } ++ else if(dev_speed == USB_SPEED_SUPER && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){ ++ best_bw = SS_BW_BOUND; ++ best_bw_idx = -1; ++ cur_bw = 0; ++ td_size = maxp * (mult+1) * (burst+1); ++ if(mult == 0){ ++ max_repeat = 0; ++ } ++ else{ ++ max_repeat = (interval-1)/(mult+1); ++ } ++ break_out = 0; ++ for(frame_idx = 0; (frame_idx < interval) && !break_out; frame_idx++){ ++ for(repeat = max_repeat; repeat >= 0; repeat--){ ++ cur_bw = count_ss_bw(is_in, ep_type, maxp, interval, burst, mult, frame_idx ++ , repeat, td_size); ++ printk(KERN_ERR "count_ss_bw, frame_idx %d, repeat %d, td_size %d, result bw %d\n" ++ , frame_idx, repeat, td_size, cur_bw); ++ if(cur_bw > 0 && cur_bw < best_bw){ ++ best_bw_idx = frame_idx; ++ best_bw_repeat = repeat; ++ best_bw = cur_bw; ++ if(cur_bw <= td_size || cur_bw < (HS_BW_BOUND>>1)){ ++ break_out = 1; ++ break; ++ } ++ } ++ } ++ } ++ printk(KERN_ERR "final best idx %d, best repeat %d\n", best_bw_idx, best_bw_repeat); ++ if(best_bw_idx == -1){ ++ return SCH_FAIL; ++ } ++ else{ ++ bOffset = best_bw_idx; ++ bCsCount = 0; ++ bRepeat = best_bw_repeat; ++ if(bRepeat == 0){ ++ bw_cost = (burst+1)*(mult+1)*maxp; ++ bPkts = (burst+1)*(mult+1); ++ } ++ else{ ++ bw_cost = (burst+1)*maxp; ++ bPkts = (burst+1); ++ } ++ if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult ++ , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){ ++ return SCH_FAIL; ++ } ++ ret = SCH_SUCCESS; ++ } ++ } ++ else{ ++ bPkts = 1; ++ ret = SCH_SUCCESS; ++ } ++ if(ret == SCH_SUCCESS){ ++ temp_ep_ctx = (struct mtk_xhci_ep_ctx *)ep_ctx; ++ temp_ep_ctx->reserved[0] |= (BPKTS(bPkts) | BCSCOUNT(bCsCount) | BBM(bBm)); ++ temp_ep_ctx->reserved[1] |= (BOFFSET(bOffset) | BREPEAT(bRepeat)); ++ ++ printk(KERN_DEBUG "[DBG] BPKTS: %x, BCSCOUNT: %x, BBM: %x\n", bPkts, bCsCount, bBm); ++ printk(KERN_DEBUG "[DBG] BOFFSET: %x, BREPEAT: %x\n", bOffset, bRepeat); ++ return SCH_SUCCESS; ++ } ++ else{ ++ return SCH_FAIL; ++ } ++} +--- /dev/null ++++ b/drivers/usb/host/xhci-mtk-scheduler.h +@@ -0,0 +1,77 @@ ++#ifndef _XHCI_MTK_SCHEDULER_H ++#define _XHCI_MTK_SCHEDULER_H ++ ++#define MTK_SCH_NEW 1 ++ ++#define SCH_SUCCESS 1 ++#define SCH_FAIL 0 ++ ++#define MAX_EP_NUM 64 ++#define SS_BW_BOUND 51000 ++#define HS_BW_BOUND 6144 ++ ++#define USB_EP_CONTROL 0 ++#define USB_EP_ISOC 1 ++#define USB_EP_BULK 2 ++#define USB_EP_INT 3 ++ ++#define USB_SPEED_LOW 1 ++#define USB_SPEED_FULL 2 ++#define USB_SPEED_HIGH 3 ++#define USB_SPEED_SUPER 5 ++ ++/* mtk scheduler bitmasks */ ++#define BPKTS(p) ((p) & 0x3f) ++#define BCSCOUNT(p) (((p) & 0x7) << 8) ++#define BBM(p) ((p) << 11) ++#define BOFFSET(p) ((p) & 0x3fff) ++#define BREPEAT(p) (((p) & 0x7fff) << 16) ++ ++ ++#if 1 ++typedef unsigned int mtk_u32; ++typedef unsigned long long mtk_u64; ++#endif ++ ++#define NULL ((void *)0) ++ ++struct mtk_xhci_ep_ctx { ++ mtk_u32 ep_info; ++ mtk_u32 ep_info2; ++ mtk_u64 deq; ++ mtk_u32 tx_info; ++ /* offset 0x14 - 0x1f reserved for HC internal use */ ++ mtk_u32 reserved[3]; ++}; ++ ++ ++struct sch_ep ++{ ++ //device info ++ int dev_speed; ++ int isTT; ++ //ep info ++ int is_in; ++ int ep_type; ++ int maxp; ++ int interval; ++ int burst; ++ int mult; ++ //scheduling info ++ int offset; ++ int repeat; ++ int pkts; ++ int cs_count; ++ int burst_mode; ++ //other ++ int bw_cost; //bandwidth cost in each repeat; including overhead ++ mtk_u32 *ep; //address of usb_endpoint pointer ++}; ++ ++int mtk_xhci_scheduler_init(void); ++int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst ++ , int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep); ++struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep); ++ ++ ++#endif +--- /dev/null ++++ b/drivers/usb/host/xhci-mtk.c +@@ -0,0 +1,265 @@ ++#include "xhci-mtk.h" ++#include "xhci-mtk-power.h" ++#include "xhci.h" ++#include "mtk-phy.h" ++#ifdef CONFIG_C60802_SUPPORT ++#include "mtk-phy-c60802.h" ++#endif ++#include "xhci-mtk-scheduler.h" ++#include <linux/kernel.h> /* printk() */ ++#include <linux/slab.h> ++#include <linux/delay.h> ++#include <asm/uaccess.h> ++#include <linux/dma-mapping.h> ++#include <linux/platform_device.h> ++ ++void setInitialReg(void ) ++{ ++ __u32 __iomem *addr; ++ u32 temp; ++ ++ /* set SSUSB DMA burst size to 128B */ ++ addr = SSUSB_U3_XHCI_BASE + SSUSB_HDMA_CFG; ++ temp = SSUSB_HDMA_CFG_MT7621_VALUE; ++ writel(temp, addr); ++ ++ /* extend U3 LTSSM Polling.LFPS timeout value */ ++ addr = SSUSB_U3_XHCI_BASE + U3_LTSSM_TIMING_PARAMETER3; ++ temp = U3_LTSSM_TIMING_PARAMETER3_VALUE; ++ writel(temp, addr); ++ ++ /* EOF */ ++ addr = SSUSB_U3_XHCI_BASE + SYNC_HS_EOF; ++ temp = SYNC_HS_EOF_VALUE; ++ writel(temp, addr); ++ ++#if defined (CONFIG_PERIODIC_ENP) ++ /* HSCH_CFG1: SCH2_FIFO_DEPTH */ ++ addr = SSUSB_U3_XHCI_BASE + HSCH_CFG1; ++ temp = readl(addr); ++ temp &= ~(0x3 << SCH2_FIFO_DEPTH_OFFSET); ++ writel(temp, addr); ++#endif ++ ++ /* Doorbell handling */ ++ addr = SIFSLV_IPPC + SSUSB_IP_SPAR0; ++ temp = 0x1; ++ writel(temp, addr); ++ ++ /* Set SW PLL Stable mode to 1 for U2 LPM device remote wakeup */ ++ /* Port 0 */ ++ addr = U2_PHY_BASE + U2_PHYD_CR1; ++ temp = readl(addr); ++ temp &= ~(0x3 << 18); ++ temp |= (1 << 18); ++ writel(temp, addr); ++ ++ /* Port 1 */ ++ addr = U2_PHY_BASE_P1 + U2_PHYD_CR1; ++ temp = readl(addr); ++ temp &= ~(0x3 << 18); ++ temp |= (1 << 18); ++ writel(temp, addr); ++} ++ ++ ++void setLatchSel(void){ ++ __u32 __iomem *latch_sel_addr; ++ u32 latch_sel_value; ++ latch_sel_addr = U3_PIPE_LATCH_SEL_ADD; ++ latch_sel_value = ((U3_PIPE_LATCH_TX)<<2) | (U3_PIPE_LATCH_RX); ++ writel(latch_sel_value, latch_sel_addr); ++} ++ ++void reinitIP(void){ ++ __u32 __iomem *ip_reset_addr; ++ u32 ip_reset_value; ++ ++ enableAllClockPower(); ++ mtk_xhci_scheduler_init(); ++} ++ ++void dbg_prb_out(void){ ++ mtk_probe_init(0x0f0f0f0f); ++ mtk_probe_out(0xffffffff); ++ mtk_probe_out(0x01010101); ++ mtk_probe_out(0x02020202); ++ mtk_probe_out(0x04040404); ++ mtk_probe_out(0x08080808); ++ mtk_probe_out(0x10101010); ++ mtk_probe_out(0x20202020); ++ mtk_probe_out(0x40404040); ++ mtk_probe_out(0x80808080); ++ mtk_probe_out(0x55555555); ++ mtk_probe_out(0xaaaaaaaa); ++} ++ ++ ++ ++/////////////////////////////////////////////////////////////////////////////// ++ ++#define RET_SUCCESS 0 ++#define RET_FAIL 1 ++ ++static int dbg_u3w(int argc, char**argv) ++{ ++ int u4TimingValue; ++ char u1TimingValue; ++ int u4TimingAddress; ++ ++ if (argc<3) ++ { ++ printk(KERN_ERR "Arg: address value\n"); ++ return RET_FAIL; ++ } ++ u3phy_init(); ++ ++ u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16); ++ u4TimingValue = (int)simple_strtol(argv[2], &argv[2], 16); ++ u1TimingValue = u4TimingValue & 0xff; ++ /* access MMIO directly */ ++ writel(u1TimingValue, u4TimingAddress); ++ printk(KERN_ERR "Write done\n"); ++ return RET_SUCCESS; ++ ++} ++ ++static int dbg_u3r(int argc, char**argv) ++{ ++ char u1ReadTimingValue; ++ int u4TimingAddress; ++ if (argc<2) ++ { ++ printk(KERN_ERR "Arg: address\n"); ++ return 0; ++ } ++ u3phy_init(); ++ mdelay(500); ++ u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16); ++ /* access MMIO directly */ ++ u1ReadTimingValue = readl(u4TimingAddress); ++ printk(KERN_ERR "Value = 0x%x\n", u1ReadTimingValue); ++ return 0; ++} ++ ++static int dbg_u3init(int argc, char**argv) ++{ ++ int ret; ++ ret = u3phy_init(); ++ printk(KERN_ERR "phy registers and operations initial done\n"); ++ if(u3phy_ops->u2_slew_rate_calibration){ ++ u3phy_ops->u2_slew_rate_calibration(u3phy); ++ } ++ else{ ++ printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n"); ++ } ++ if(u3phy_ops->init(u3phy) == PHY_TRUE) ++ return RET_SUCCESS; ++ return RET_FAIL; ++} ++ ++void dbg_setU1U2(int argc, char**argv){ ++ struct xhci_hcd *xhci; ++ int u1_value; ++ int u2_value; ++ u32 port_id, temp; ++ u32 __iomem *addr; ++ ++ if (argc<3) ++ { ++ printk(KERN_ERR "Arg: u1value u2value\n"); ++ return RET_FAIL; ++ } ++ ++ u1_value = (int)simple_strtol(argv[1], &argv[1], 10); ++ u2_value = (int)simple_strtol(argv[2], &argv[2], 10); ++ addr = (SSUSB_U3_XHCI_BASE + 0x424); ++ temp = readl(addr); ++ temp = temp & (~(0x0000ffff)); ++ temp = temp | u1_value | (u2_value<<8); ++ writel(temp, addr); ++} ++/////////////////////////////////////////////////////////////////////////////// ++ ++int call_function(char *buf) ++{ ++ int i; ++ int argc; ++ char *argv[80]; ++ ++ argc = 0; ++ do ++ { ++ argv[argc] = strsep(&buf, " "); ++ printk(KERN_DEBUG "[%d] %s\r\n", argc, argv[argc]); ++ argc++; ++ } while (buf); ++ if (!strcmp("dbg.r", argv[0])) ++ dbg_prb_out(); ++ else if (!strcmp("dbg.u3w", argv[0])) ++ dbg_u3w(argc, argv); ++ else if (!strcmp("dbg.u3r", argv[0])) ++ dbg_u3r(argc, argv); ++ else if (!strcmp("dbg.u3i", argv[0])) ++ dbg_u3init(argc, argv); ++ else if (!strcmp("pw.u1u2", argv[0])) ++ dbg_setU1U2(argc, argv); ++ return 0; ++} ++ ++long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ++{ ++ char w_buf[200]; ++ char r_buf[200] = "this is a test"; ++ int len = 200; ++ ++ switch (cmd) { ++ case IOCTL_READ: ++ copy_to_user((char *) arg, r_buf, len); ++ printk(KERN_DEBUG "IOCTL_READ: %s\r\n", r_buf); ++ break; ++ case IOCTL_WRITE: ++ copy_from_user(w_buf, (char *) arg, len); ++ printk(KERN_DEBUG "IOCTL_WRITE: %s\r\n", w_buf); ++ ++ //invoke function ++ return call_function(w_buf); ++ break; ++ default: ++ return -ENOTTY; ++ } ++ ++ return len; ++} ++ ++int xhci_mtk_test_open(struct inode *inode, struct file *file) ++{ ++ ++ printk(KERN_DEBUG "xhci_mtk_test open: successful\n"); ++ return 0; ++} ++ ++int xhci_mtk_test_release(struct inode *inode, struct file *file) ++{ ++ ++ printk(KERN_DEBUG "xhci_mtk_test release: successful\n"); ++ return 0; ++} ++ ++ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr) ++{ ++ ++ printk(KERN_DEBUG "xhci_mtk_test read: returning zero bytes\n"); ++ return 0; ++} ++ ++ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos) ++{ ++ ++ printk(KERN_DEBUG "xhci_mtk_test write: accepting zero bytes\n"); ++ return 0; ++} ++ ++ ++ ++ +--- /dev/null ++++ b/drivers/usb/host/xhci-mtk.h +@@ -0,0 +1,120 @@ ++#ifndef _XHCI_MTK_H ++#define _XHCI_MTK_H ++ ++#include <linux/usb.h> ++#include "xhci.h" ++ ++#define SSUSB_U3_XHCI_BASE 0xBE1C0000 ++#define SSUSB_U3_MAC_BASE 0xBE1C2400 ++#define SSUSB_U3_SYS_BASE 0xBE1C2600 ++#define SSUSB_U2_SYS_BASE 0xBE1C3400 ++#define SSUB_SIF_SLV_TOP 0xBE1D0000 ++#define SIFSLV_IPPC (SSUB_SIF_SLV_TOP + 0x700) ++ ++#define U3_PIPE_LATCH_SEL_ADD SSUSB_U3_MAC_BASE + 0x130 ++#define U3_PIPE_LATCH_TX 0 ++#define U3_PIPE_LATCH_RX 0 ++ ++#define U3_UX_EXIT_LFPS_TIMING_PAR 0xa0 ++#define U3_REF_CK_PAR 0xb0 ++#define U3_RX_UX_EXIT_LFPS_REF_OFFSET 8 ++#define U3_RX_UX_EXIT_LFPS_REF 3 ++#define U3_REF_CK_VAL 10 ++ ++#define U3_TIMING_PULSE_CTRL 0xb4 ++#define CNT_1US_VALUE 63 //62.5MHz:63, 70MHz:70, 80MHz:80, 100MHz:100, 125MHz:125 ++ ++#define USB20_TIMING_PARAMETER 0x40 ++#define TIME_VALUE_1US 63 //62.5MHz:63, 80MHz:80, 100MHz:100, 125MHz:125 ++ ++#define LINK_PM_TIMER 0x8 ++#define PM_LC_TIMEOUT_VALUE 3 ++ ++#define XHCI_IMOD 0x624 ++#define XHCI_IMOD_MT7621_VALUE 0x10 ++ ++#define SSUSB_HDMA_CFG 0x950 ++#define SSUSB_HDMA_CFG_MT7621_VALUE 0x10E0E0C ++ ++#define U3_LTSSM_TIMING_PARAMETER3 0x2514 ++#define U3_LTSSM_TIMING_PARAMETER3_VALUE 0x3E8012C ++ ++#define U2_PHYD_CR1 0x64 ++ ++#define SSUSB_IP_SPAR0 0xC8 ++ ++#define SYNC_HS_EOF 0x938 ++#define SYNC_HS_EOF_VALUE 0x201F3 ++ ++#define HSCH_CFG1 0x960 ++#define SCH2_FIFO_DEPTH_OFFSET 16 ++ ++ ++#define SSUSB_IP_PW_CTRL (SIFSLV_IPPC+0x0) ++#define SSUSB_IP_SW_RST (1<<0) ++#define SSUSB_IP_PW_CTRL_1 (SIFSLV_IPPC+0x4) ++#define SSUSB_IP_PDN (1<<0) ++#define SSUSB_U3_CTRL(p) (SIFSLV_IPPC+0x30+(p*0x08)) ++#define SSUSB_U3_PORT_DIS (1<<0) ++#define SSUSB_U3_PORT_PDN (1<<1) ++#define SSUSB_U3_PORT_HOST_SEL (1<<2) ++#define SSUSB_U3_PORT_CKBG_EN (1<<3) ++#define SSUSB_U3_PORT_MAC_RST (1<<4) ++#define SSUSB_U3_PORT_PHYD_RST (1<<5) ++#define SSUSB_U2_CTRL(p) (SIFSLV_IPPC+(0x50)+(p*0x08)) ++#define SSUSB_U2_PORT_DIS (1<<0) ++#define SSUSB_U2_PORT_PDN (1<<1) ++#define SSUSB_U2_PORT_HOST_SEL (1<<2) ++#define SSUSB_U2_PORT_CKBG_EN (1<<3) ++#define SSUSB_U2_PORT_MAC_RST (1<<4) ++#define SSUSB_U2_PORT_PHYD_RST (1<<5) ++#define SSUSB_IP_CAP (SIFSLV_IPPC+0x024) ++ ++#define SSUSB_U3_PORT_NUM(p) (p & 0xff) ++#define SSUSB_U2_PORT_NUM(p) ((p>>8) & 0xff) ++ ++ ++#define XHCI_MTK_TEST_MAJOR 234 ++#define DEVICE_NAME "xhci_mtk_test" ++ ++#define CLI_MAGIC 'CLI' ++#define IOCTL_READ _IOR(CLI_MAGIC, 0, int) ++#define IOCTL_WRITE _IOW(CLI_MAGIC, 1, int) ++ ++void reinitIP(void); ++void setInitialReg(void); ++void dbg_prb_out(void); ++int call_function(char *buf); ++ ++long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg); ++int xhci_mtk_test_open(struct inode *inode, struct file *file); ++int xhci_mtk_test_release(struct inode *inode, struct file *file); ++ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr); ++ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos); ++ ++/* ++ mediatek probe out ++*/ ++/************************************************************************************/ ++ ++#define SW_PRB_OUT_ADDR (SIFSLV_IPPC+0xc0) ++#define PRB_MODULE_SEL_ADDR (SIFSLV_IPPC+0xbc) ++ ++static inline void mtk_probe_init(const u32 byte){ ++ __u32 __iomem *ptr = (__u32 __iomem *) PRB_MODULE_SEL_ADDR; ++ writel(byte, ptr); ++} ++ ++static inline void mtk_probe_out(const u32 value){ ++ __u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR; ++ writel(value, ptr); ++} ++ ++static inline u32 mtk_probe_value(void){ ++ __u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR; ++ ++ return readl(ptr); ++} ++ ++ ++#endif +--- a/drivers/usb/host/xhci-plat.c ++++ b/drivers/usb/host/xhci-plat.c +@@ -33,6 +33,13 @@ + * dev struct in order to setup MSI + */ + xhci->quirks |= XHCI_PLAT; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ /* MTK host controller gives a spurious successful event after a ++ * short transfer. Ignore it. ++ */ ++ xhci->quirks |= XHCI_SPURIOUS_SUCCESS; ++ xhci->quirks |= XHCI_LPM_SUPPORT; ++#endif + } + + /* called during probe() after chip reset completes */ +@@ -79,7 +86,11 @@ + + driver = &xhci_plat_hc_driver; + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ irq = XHC_IRQ; ++#else + irq = platform_get_irq(pdev, 0); ++#endif + if (irq < 0) + return -ENODEV; + +--- a/drivers/usb/host/xhci-ring.c ++++ b/drivers/usb/host/xhci-ring.c +@@ -254,16 +254,20 @@ + static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring, + unsigned int num_trbs) + { ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + int num_trbs_in_deq_seg; ++#endif + + if (ring->num_trbs_free < num_trbs) + return 0; + ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + if (ring->type != TYPE_COMMAND && ring->type != TYPE_EVENT) { + num_trbs_in_deq_seg = ring->dequeue - ring->deq_seg->trbs; + if (ring->num_trbs_free < num_trbs + num_trbs_in_deq_seg) + return 0; + } ++#endif + + return 1; + } +@@ -2799,6 +2803,7 @@ + next = ring->enqueue; + + while (last_trb(xhci, ring, ring->enq_seg, next)) { ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + /* If we're not dealing with 0.95 hardware or isoc rings + * on AMD 0.96 host, clear the chain bit. + */ +@@ -2808,6 +2813,9 @@ + next->link.control &= cpu_to_le32(~TRB_CHAIN); + else + next->link.control |= cpu_to_le32(TRB_CHAIN); ++#else ++ next->link.control &= cpu_to_le32(~TRB_CHAIN); ++#endif + + wmb(); + next->link.control ^= cpu_to_le32(TRB_CYCLE); +@@ -2938,6 +2946,9 @@ + start_trb->field[3] |= cpu_to_le32(start_cycle); + else + start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE); ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ wmb(); ++#endif + xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id); + } + +@@ -2993,6 +3004,29 @@ + return (remainder >> 10) << 17; + } + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++static u32 mtk_xhci_td_remainder(unsigned int td_transfer_size, unsigned int td_running_total, unsigned int maxp, unsigned trb_buffer_length) ++{ ++ u32 max = 31; ++ int remainder, td_packet_count, packet_transferred; ++ ++ //0 for the last TRB ++ //FIXME: need to workaround if there is ZLP in this TD ++ if (td_running_total + trb_buffer_length == td_transfer_size) ++ return 0; ++ ++ //FIXME: need to take care of high-bandwidth (MAX_ESIT) ++ packet_transferred = (td_running_total /*+ trb_buffer_length*/) / maxp; ++ td_packet_count = DIV_ROUND_UP(td_transfer_size, maxp); ++ remainder = td_packet_count - packet_transferred; ++ ++ if (remainder > max) ++ return max << 17; ++ else ++ return remainder << 17; ++} ++#endif ++ + /* + * For xHCI 1.0 host controllers, TD size is the number of max packet sized + * packets remaining in the TD (*not* including this TRB). +@@ -3130,6 +3164,7 @@ + } + + /* Set the TRB length, TD size, and interrupter fields. */ ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + if (xhci->hci_version < 0x100) { + remainder = xhci_td_remainder( + urb->transfer_buffer_length - +@@ -3139,6 +3174,12 @@ + trb_buff_len, total_packet_count, urb, + num_trbs - 1); + } ++#else ++ if (num_trbs > 1) ++ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, ++ running_total, urb->ep->desc.wMaxPacketSize, trb_buff_len); ++#endif ++ + length_field = TRB_LEN(trb_buff_len) | + remainder | + TRB_INTR_TARGET(0); +@@ -3201,6 +3242,9 @@ + int running_total, trb_buff_len, ret; + unsigned int total_packet_count; + u64 addr; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ int max_packet; ++#endif + + if (urb->num_sgs) + return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index); +@@ -3226,6 +3270,25 @@ + running_total += TRB_MAX_BUFF_SIZE; + } + /* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */ ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ switch(urb->dev->speed){ ++ case USB_SPEED_SUPER: ++ max_packet = urb->ep->desc.wMaxPacketSize; ++ break; ++ case USB_SPEED_HIGH: ++ case USB_SPEED_FULL: ++ case USB_SPEED_LOW: ++ case USB_SPEED_WIRELESS: ++ case USB_SPEED_UNKNOWN: ++ default: ++ max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff; ++ break; ++ } ++ if((urb->transfer_flags & URB_ZERO_PACKET) ++ && ((urb->transfer_buffer_length % max_packet) == 0)){ ++ num_trbs++; ++ } ++#endif + + ret = prepare_transfer(xhci, xhci->devs[slot_id], + ep_index, urb->stream_id, +@@ -3285,6 +3348,7 @@ + field |= TRB_ISP; + + /* Set the TRB length, TD size, and interrupter fields. */ ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + if (xhci->hci_version < 0x100) { + remainder = xhci_td_remainder( + urb->transfer_buffer_length - +@@ -3294,6 +3358,10 @@ + trb_buff_len, total_packet_count, urb, + num_trbs - 1); + } ++#else ++ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len); ++#endif ++ + length_field = TRB_LEN(trb_buff_len) | + remainder | + TRB_INTR_TARGET(0); +@@ -3383,7 +3451,11 @@ + field |= 0x1; + + /* xHCI 1.0 6.4.1.2.1: Transfer Type field */ ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ if (1) { ++#else + if (xhci->hci_version == 0x100) { ++#endif + if (urb->transfer_buffer_length > 0) { + if (setup->bRequestType & USB_DIR_IN) + field |= TRB_TX_TYPE(TRB_DATA_IN); +@@ -3407,7 +3479,12 @@ + field = TRB_TYPE(TRB_DATA); + + length_field = TRB_LEN(urb->transfer_buffer_length) | ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + xhci_td_remainder(urb->transfer_buffer_length) | ++#else ++ //CC: MTK style, no scatter-gather for control transfer ++ 0 | ++#endif + TRB_INTR_TARGET(0); + if (urb->transfer_buffer_length > 0) { + if (setup->bRequestType & USB_DIR_IN) +@@ -3530,6 +3607,9 @@ + u64 start_addr, addr; + int i, j; + bool more_trbs_coming; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ int max_packet; ++#endif + + ep_ring = xhci->devs[slot_id]->eps[ep_index].ring; + +@@ -3543,6 +3623,21 @@ + start_trb = &ep_ring->enqueue->generic; + start_cycle = ep_ring->cycle_state; + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ switch(urb->dev->speed){ ++ case USB_SPEED_SUPER: ++ max_packet = urb->ep->desc.wMaxPacketSize; ++ break; ++ case USB_SPEED_HIGH: ++ case USB_SPEED_FULL: ++ case USB_SPEED_LOW: ++ case USB_SPEED_WIRELESS: ++ case USB_SPEED_UNKNOWN: ++ max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff; ++ break; ++ } ++#endif ++ + urb_priv = urb->hcpriv; + /* Queue the first TRB, even if it's zero-length */ + for (i = 0; i < num_tds; i++) { +@@ -3614,9 +3709,13 @@ + } else { + td->last_trb = ep_ring->enqueue; + field |= TRB_IOC; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ if (!(xhci->quirks & XHCI_AVOID_BEI)) { ++#else + if (xhci->hci_version == 0x100 && + !(xhci->quirks & + XHCI_AVOID_BEI)) { ++#endif + /* Set BEI bit except for the last td */ + if (i < num_tds - 1) + field |= TRB_BEI; +@@ -3631,6 +3730,7 @@ + trb_buff_len = td_remain_len; + + /* Set the TRB length, TD size, & interrupter fields. */ ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + if (xhci->hci_version < 0x100) { + remainder = xhci_td_remainder( + td_len - running_total); +@@ -3640,6 +3740,10 @@ + total_packet_count, urb, + (trbs_per_td - j - 1)); + } ++#else ++ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len); ++#endif ++ + length_field = TRB_LEN(trb_buff_len) | + remainder | + TRB_INTR_TARGET(0); +--- a/drivers/usb/host/xhci.c ++++ b/drivers/usb/host/xhci.c +@@ -32,6 +32,16 @@ + #include "xhci.h" + #include "xhci-trace.h" + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++#include <asm/uaccess.h> ++#include <linux/dma-mapping.h> ++#include <linux/platform_device.h> ++#include "mtk-phy.h" ++#include "xhci-mtk-scheduler.h" ++#include "xhci-mtk-power.h" ++#include "xhci-mtk.h" ++#endif ++ + #define DRIVER_AUTHOR "Sarah Sharp" + #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver" + +@@ -46,6 +56,18 @@ + module_param(quirks, uint, S_IRUGO); + MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default"); + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg); ++static struct file_operations xhci_mtk_test_fops = { ++ .owner = THIS_MODULE, ++ .read = xhci_mtk_test_read, ++ .write = xhci_mtk_test_write, ++ .unlocked_ioctl = xhci_mtk_test_unlock_ioctl, ++ .open = xhci_mtk_test_open, ++ .release = xhci_mtk_test_release, ++}; ++#endif ++ + /* TODO: copied from ehci-hcd.c - can this be refactored? */ + /* + * xhci_handshake - spin reading hc until handshake completes or fails +@@ -198,7 +220,7 @@ + return ret; + } + +-#ifdef CONFIG_PCI ++#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + static int xhci_free_msi(struct xhci_hcd *xhci) + { + int i; +@@ -448,6 +470,11 @@ + "Attempting compliance mode recovery"); + hcd = xhci->shared_hcd; + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ temp |= (1 << 31); ++ writel(temp, xhci->usb3_ports[i]); ++#endif ++ + if (hcd->state == HC_STATE_SUSPENDED) + usb_hcd_resume_root_hub(hcd); + +@@ -497,6 +524,9 @@ + { + const char *dmi_product_name, *dmi_sys_vendor; + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ return true; ++#endif + dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME); + dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR); + if (!dmi_product_name || !dmi_sys_vendor) +@@ -542,6 +572,10 @@ + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "xHCI doesn't need link TRB QUIRK"); + } ++ ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ mtk_xhci_scheduler_init(); ++#endif + retval = xhci_mem_init(xhci, GFP_KERNEL); + xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_init"); + +@@ -626,7 +660,11 @@ + "// Set the interrupt modulation register"); + temp = readl(&xhci->ir_set->irq_control); + temp &= ~ER_IRQ_INTERVAL_MASK; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ temp |= (u32) 16; ++#else + temp |= (u32) 160; ++#endif + writel(temp, &xhci->ir_set->irq_control); + + /* Set the HCD state before we enable the irqs */ +@@ -651,6 +689,9 @@ + xhci_queue_vendor_command(xhci, command, 0, 0, 0, + TRB_TYPE(TRB_NEC_GET_FW)); + } ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ enableXhciAllPortPower(xhci); ++#endif + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "Finished xhci_run for USB2 roothub"); + return 0; +@@ -1642,6 +1683,14 @@ + u32 drop_flag; + u32 new_add_flags, new_drop_flags; + int ret; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++#if MTK_SCH_NEW ++ struct xhci_slot_ctx *slot_ctx; ++ struct sch_ep *sch_ep = NULL; ++ int isTT; ++ int ep_type; ++#endif ++#endif + + ret = xhci_check_args(hcd, udev, ep, 1, true, __func__); + if (ret <= 0) +@@ -1689,6 +1738,40 @@ + + xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep); + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++#if MTK_SCH_NEW ++ slot_ctx = xhci_get_slot_ctx(xhci, xhci->devs[udev->slot_id]->out_ctx); ++ if ((slot_ctx->tt_info & 0xff) > 0) { ++ isTT = 1; ++ } ++ else { ++ isTT = 0; ++ } ++ if (usb_endpoint_xfer_int(&ep->desc)) { ++ ep_type = USB_EP_INT; ++ } ++ else if (usb_endpoint_xfer_isoc(&ep->desc)) { ++ ep_type = USB_EP_ISOC; ++ } ++ else if (usb_endpoint_xfer_bulk(&ep->desc)) { ++ ep_type = USB_EP_BULK; ++ } ++ else ++ ep_type = USB_EP_CONTROL; ++ ++ sch_ep = mtk_xhci_scheduler_remove_ep(udev->speed, usb_endpoint_dir_in(&ep->desc) ++ , isTT, ep_type, (mtk_u32 *)ep); ++ if (sch_ep != NULL) { ++ kfree(sch_ep); ++ } ++ else { ++ xhci_dbg(xhci, "[MTK]Doesn't find ep_sch instance when removing endpoint\n"); ++ } ++#else ++ mtk_xhci_scheduler_remove_ep(xhci, udev, ep); ++#endif ++#endif ++ + xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n", + (unsigned int) ep->desc.bEndpointAddress, + udev->slot_id, +@@ -1721,6 +1804,19 @@ + u32 new_add_flags, new_drop_flags; + struct xhci_virt_device *virt_dev; + int ret = 0; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ struct xhci_ep_ctx *in_ep_ctx; ++#if MTK_SCH_NEW ++ struct xhci_slot_ctx *slot_ctx; ++ struct sch_ep *sch_ep; ++ int isTT; ++ int ep_type; ++ int maxp = 0; ++ int burst = 0; ++ int mult = 0; ++ int interval; ++#endif ++#endif + + ret = xhci_check_args(hcd, udev, ep, 1, true, __func__); + if (ret <= 0) { +@@ -1787,6 +1883,56 @@ + return -ENOMEM; + } + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ in_ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index); ++#if MTK_SCH_NEW ++ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx); ++ if ((slot_ctx->tt_info & 0xff) > 0) { ++ isTT = 1; ++ } ++ else { ++ isTT = 0; ++ } ++ if (usb_endpoint_xfer_int(&ep->desc)) { ++ ep_type = USB_EP_INT; ++ } ++ else if (usb_endpoint_xfer_isoc(&ep->desc)) { ++ ep_type = USB_EP_ISOC; ++ } ++ else if (usb_endpoint_xfer_bulk(&ep->desc)) { ++ ep_type = USB_EP_BULK; ++ } ++ else ++ ep_type = USB_EP_CONTROL; ++ ++ if (udev->speed == USB_SPEED_FULL || udev->speed == USB_SPEED_HIGH ++ || udev->speed == USB_SPEED_LOW) { ++ maxp = ep->desc.wMaxPacketSize & 0x7FF; ++ burst = ep->desc.wMaxPacketSize >> 11; ++ mult = 0; ++ } ++ else if (udev->speed == USB_SPEED_SUPER) { ++ maxp = ep->desc.wMaxPacketSize & 0x7FF; ++ burst = ep->ss_ep_comp.bMaxBurst; ++ mult = ep->ss_ep_comp.bmAttributes & 0x3; ++ } ++ interval = (1 << ((in_ep_ctx->ep_info >> 16) & 0xff)); ++ sch_ep = kmalloc(sizeof(struct sch_ep), GFP_KERNEL); ++ if (mtk_xhci_scheduler_add_ep(udev->speed, usb_endpoint_dir_in(&ep->desc), ++ isTT, ep_type, maxp, interval, burst, mult, (mtk_u32 *)ep ++ , (mtk_u32 *)in_ep_ctx, sch_ep) != SCH_SUCCESS) { ++ xhci_err(xhci, "[MTK] not enough bandwidth\n"); ++ ++ return -ENOSPC; ++ } ++#else ++ if (mtk_xhci_scheduler_add_ep(xhci, udev, ep, in_ep_ctx) != SCH_SUCCESS) { ++ xhci_err(xhci, "[MTK] not enough bandwidth\n"); ++ ++ return -ENOSPC; ++ } ++#endif ++#endif + ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs); + new_add_flags = le32_to_cpu(ctrl_ctx->add_flags); + +@@ -4451,8 +4597,14 @@ + u16 *timeout) + { + if (state == USB3_LPM_U1) ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ if (xhci->quirks & XHCI_INTEL_HOST) ++#endif + return xhci_calculate_u1_timeout(xhci, udev, desc); + else if (state == USB3_LPM_U2) ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ if (xhci->quirks & XHCI_INTEL_HOST) ++#endif + return xhci_calculate_u2_timeout(xhci, udev, desc); + + return USB3_LPM_DISABLED; +@@ -4837,7 +4989,9 @@ + hcd->self.no_sg_constraint = 1; + + /* XHCI controllers don't stop the ep queue on short packets :| */ ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + hcd->self.no_stop_on_short = 1; ++#endif + + if (usb_hcd_is_primary_hcd(hcd)) { + xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL); +@@ -4900,6 +5054,10 @@ + goto error; + xhci_dbg(xhci, "Reset complete\n"); + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ setInitialReg(); ++#endif ++ + /* Set dma_mask and coherent_dma_mask to 64-bits, + * if xHC supports 64-bit addressing */ + if (HCC_64BIT_ADDR(xhci->hcc_params) && +@@ -4994,8 +5152,57 @@ + MODULE_AUTHOR(DRIVER_AUTHOR); + MODULE_LICENSE("GPL"); + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++static struct resource xhci_resouce[] = { ++ { ++ .name = "xhci-hcd", ++ .start = XHC_IO_START, ++ .end = XHC_IO_START + XHC_IO_LENGTH -1, ++ .flags = IORESOURCE_MEM, ++ } ++}; ++ ++static struct platform_device xhci_platform_dev = { ++ .name = "xhci-hcd", ++ .id = -1, ++ .dev = { ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = xhci_resouce, ++}; ++#endif ++ + static int __init xhci_hcd_init(void) + { ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ struct platform_device *pPlatformDev; ++ ++ register_chrdev(XHCI_MTK_TEST_MAJOR, DEVICE_NAME, &xhci_mtk_test_fops); ++ ++ u3phy_init(); ++ if (u3phy_ops->u2_slew_rate_calibration) { ++ u3phy_ops->u2_slew_rate_calibration(u3phy); ++ u3phy_ops->u2_slew_rate_calibration(u3phy_p1); ++ } ++ else{ ++ printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n"); ++ } ++ u3phy_ops->init(u3phy); ++ reinitIP(); ++ ++ pPlatformDev = &xhci_platform_dev; ++ memset(pPlatformDev, 0, sizeof(struct platform_device)); ++ pPlatformDev->name = "xhci-hcd"; ++ pPlatformDev->id = -1; ++ pPlatformDev->dev.coherent_dma_mask = 0xffffffff; ++ pPlatformDev->dev.dma_mask = &pPlatformDev->dev.coherent_dma_mask; ++ pPlatformDev->resource = xhci_resouce; ++ pPlatformDev->num_resources = ARRAY_SIZE(xhci_resouce); ++ ++ platform_device_register(&xhci_platform_dev); ++ ++#endif ++ + /* + * Check the compiler generated sizes of structures that must be laid + * out in specific ways for hardware access. +--- a/drivers/usb/host/xhci.h ++++ b/drivers/usb/host/xhci.h +@@ -32,6 +32,21 @@ + #include "xhci-ext-caps.h" + #include "pci-quirks.h" + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++#define XHC_IRQ (22 + 8) ++#define XHC_IO_START 0x1E1C0000 ++#define XHC_IO_LENGTH 0x10000 ++/* mtk scheduler bitmasks */ ++#define BPKTS(p) ((p) & 0x3f) ++#define BCSCOUNT(p) (((p) & 0x7) << 8) ++#define BBM(p) ((p) << 11) ++#define BOFFSET(p) ((p) & 0x3fff) ++#define BREPEAT(p) (((p) & 0x7fff) << 16) ++#endif ++ ++ ++ ++ + /* xHCI PCI Configuration Registers */ + #define XHCI_SBRN_OFFSET (0x60) + +@@ -1582,8 +1597,12 @@ + /* Compliance Mode Recovery Data */ + struct timer_list comp_mode_recovery_timer; + u32 port_status_u0; ++#ifdef CONFIG_USB_MT7621_XHCI_PLATFORM ++#define COMP_MODE_RCVRY_MSECS 5000 ++#else + /* Compliance Mode Timer Triggered every 2 seconds */ + #define COMP_MODE_RCVRY_MSECS 2000 ++#endif + }; + + /* convert between an HCD pointer and the corresponding EHCI_HCD */ +@@ -1731,6 +1750,26 @@ + void xhci_free_command(struct xhci_hcd *xhci, + struct xhci_command *command); + ++#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++/* xHCI PCI glue */ ++int xhci_register_pci(void); ++void xhci_unregister_pci(void); ++#else ++static inline int xhci_register_pci(void) { return 0; } ++static inline void xhci_unregister_pci(void) {} ++#endif ++ ++#if defined(CONFIG_USB_XHCI_PLATFORM) \ ++ || defined(CONFIG_USB_XHCI_PLATFORM_MODULE) ++int xhci_register_plat(void); ++void xhci_unregister_plat(void); ++#else ++static inline int xhci_register_plat(void) ++{ return 0; } ++static inline void xhci_unregister_plat(void) ++{ } ++#endif ++ + /* xHCI host controller glue */ + typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *); + int xhci_handshake(struct xhci_hcd *xhci, void __iomem *ptr, |