diff options
Diffstat (limited to 'target/linux/ramips')
9 files changed, 478 insertions, 76 deletions
diff --git a/target/linux/ramips/dts/mt7621_ubnt_unifi-6-lite.dts b/target/linux/ramips/dts/mt7621_ubnt_unifi-6-lite.dts new file mode 100644 index 0000000000..422d17673b --- /dev/null +++ b/target/linux/ramips/dts/mt7621_ubnt_unifi-6-lite.dts @@ -0,0 +1,83 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621_ubnt_unifi.dtsi" + +/ { + compatible = "ubnt,unifi-6-lite", "mediatek,mt7621-soc"; + model = "Ubiquiti UniFi 6 Lite"; + + chosen { + bootargs-override = "console=ttyS0,115200"; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "mx25l25635f", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x60000>; + read-only; + }; + + partition@60000 { + label = "u-boot-env"; + reg = <0x60000 0x10000>; + read-only; + }; + + factory: partition@70000 { + label = "factory"; + reg = <0x70000 0x40000>; + read-only; + }; + + eeprom: partition@b0000 { + label = "eeprom"; + reg = <0xb0000 0x10000>; + read-only; + }; + + partition@c0000 { + label = "bs"; + reg = <0xc0000 0x10000>; + }; + + partition@d0000 { + label = "cfg"; + reg = <0xd0000 0x100000>; + read-only; + }; + + partition@1d0000 { + compatible = "denx,fit"; + label = "firmware"; + reg = <0x1d0000 0xf10000>; + }; + + partition@10e0000 { + label = "kernel1"; + reg = <0x10e0000 0xf10000>; + }; + }; + }; +}; + +&wlan_2g { + mtd-mac-address = <&eeprom 0x0>; +}; + +&wlan_5g { + mediatek,mtd-eeprom = <&factory 0x20000>; + mtd-mac-address = <&eeprom 0x6>; +}; diff --git a/target/linux/ramips/dts/mt7621_ubnt_unifi-nanohd.dts b/target/linux/ramips/dts/mt7621_ubnt_unifi-nanohd.dts index 4ba5f6a428..401868362e 100644 --- a/target/linux/ramips/dts/mt7621_ubnt_unifi-nanohd.dts +++ b/target/linux/ramips/dts/mt7621_ubnt_unifi-nanohd.dts @@ -1,49 +1,10 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include "mt7621.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> +#include "mt7621_ubnt_unifi.dtsi" / { compatible = "ubnt,unifi-nanohd", "mediatek,mt7621-soc"; model = "Ubiquiti UniFi nanoHD"; - - aliases { - led-boot = &led_white; - led-failsafe = &led_white; - led-running = &led_blue; - led-upgrade = &led_blue; - label-mac-device = &gmac0; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - leds { - compatible = "gpio-leds"; - - led_blue: dome_blue { - label = "blue:dome"; - gpios = <&gpio 3 GPIO_ACTIVE_HIGH>; - }; - - led_white: dome_white { - label = "white:dome"; - gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&gpio 12 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; }; &spi0 { @@ -109,40 +70,6 @@ }; }; -&pcie { - status = "okay"; -}; - -&pcie0 { - wifi@0,0 { - reg = <0x0 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x0000>; - }; -}; - -&pcie1 { - wifi@0,0 { - reg = <0x0 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - }; -}; - -&gmac0 { - mtd-mac-address = <&eeprom 0x0>; -}; - -&switch0 { - ports { - port@0 { - status = "okay"; - label = "lan"; - }; - }; -}; - -&state_default { - gpio { - groups = "i2c", "uart2"; - function = "gpio"; - }; +&wlan_5g { + mediatek,mtd-eeprom = <&factory 0x8000>; }; diff --git a/target/linux/ramips/dts/mt7621_ubnt_unifi.dtsi b/target/linux/ramips/dts/mt7621_ubnt_unifi.dtsi new file mode 100644 index 0000000000..e0625ba500 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_ubnt_unifi.dtsi @@ -0,0 +1,81 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + aliases { + led-boot = &led_white; + led-failsafe = &led_white; + led-running = &led_blue; + led-upgrade = &led_blue; + label-mac-device = &gmac0; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + led_blue: dome_blue { + label = "blue:dome"; + gpios = <&gpio 3 GPIO_ACTIVE_HIGH>; + }; + + led_white: dome_white { + label = "white:dome"; + gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wlan_2g: wifi@0,0 { + reg = <0x0 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0>; + }; +}; + +&pcie1 { + wlan_5g: wifi@0,0 { + reg = <0x0 0 0 0 0>; + }; +}; + +&gmac0 { + mtd-mac-address = <&eeprom 0x0>; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "lan"; + }; + }; +}; + +&state_default { + gpio { + groups = "i2c", "uart2"; + function = "gpio"; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index f6b72a699d..720d435665 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -1130,6 +1130,16 @@ define Device/ubnt_edgerouter-x-sfp endef TARGET_DEVICES += ubnt_edgerouter-x-sfp +define Device/ubnt_unifi-6-lite + $(Device/dsa-migration) + DEVICE_VENDOR := Ubiquiti + DEVICE_MODEL := UniFi 6 Lite + DEVICE_PACKAGES += kmod-mt7603 kmod-mt7915e + KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb + IMAGE_SIZE := 15424k +endef +TARGET_DEVICES += ubnt_unifi-6-lite + define Device/ubnt_unifi-nanohd $(Device/dsa-migration) DEVICE_VENDOR := Ubiquiti diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index bca4cc23dc..83c4162e2f 100755 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -29,6 +29,7 @@ ramips_setup_interfaces() tplink,re350-v1|\ tplink,re500-v1|\ tplink,re650-v1|\ + ubnt,unifi-6-lite|\ ubnt,unifi-nanohd) ucidef_set_interface_lan "lan" ;; diff --git a/target/linux/ramips/mt7621/config-5.4 b/target/linux/ramips/mt7621/config-5.4 index fbfb5b09f1..b2ad37510b 100644 --- a/target/linux/ramips/mt7621/config-5.4 +++ b/target/linux/ramips/mt7621/config-5.4 @@ -209,6 +209,7 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_RAW_NAND=y CONFIG_MTD_ROUTERBOOT_PARTS=y CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_SPLIT_FIT_FW=y CONFIG_MTD_SPLIT_MINOR_FW=y CONFIG_MTD_SPLIT_SEAMA_FW=y CONFIG_MTD_SPLIT_TPLINK_FW=y diff --git a/target/linux/ramips/patches-5.4/0001-MIPS-cmdline-Clean-up-boot_command_line-initializati.patch b/target/linux/ramips/patches-5.4/0001-MIPS-cmdline-Clean-up-boot_command_line-initializati.patch new file mode 100644 index 0000000000..eedc7498be --- /dev/null +++ b/target/linux/ramips/patches-5.4/0001-MIPS-cmdline-Clean-up-boot_command_line-initializati.patch @@ -0,0 +1,192 @@ +From: Paul Burton <paul.burton@mips.com> +Date: Wed, 9 Oct 2019 23:09:45 +0000 +Subject: MIPS: cmdline: Clean up boot_command_line initialization + +Our current code to initialize boot_command_line is a mess. Some of this +is due to the addition of too many options over the years, and some of +this is due to workarounds for early_init_dt_scan_chosen() performing +actions specific to options from other architectures that probably +shouldn't be in generic code. + +Clean this up by introducing a new bootcmdline_init() function that +simplifies the initialization somewhat. The major changes are: + +- Because bootcmdline_init() is a function it can return early in the + CONFIG_CMDLINE_OVERRIDE case. + +- We clear boot_command_line rather than inheriting whatever + early_init_dt_scan_chosen() may have left us. This means we no longer + need to set boot_command_line to a space character in an attempt to + prevent early_init_dt_scan_chosen() from copying CONFIG_CMDLINE into + boot_command_line without us knowing about it. + +- Indirection via USE_PROM_CMDLINE, USE_DTB_CMDLINE, EXTEND_WITH_PROM & + BUILTIN_EXTEND_WITH_PROM macros is removed; they seemingly served only + to obfuscate the code. + +- The logic is cleaner, clearer & commented. + +Two minor drawbacks of this approach are: + +1) We call of_scan_flat_dt(), which means we scan through the DT again. + The overhead is fairly minimal & shouldn't be noticeable. + +2) cmdline_scan_chosen() duplicates a small amount of the logic from + early_init_dt_scan_chosen(). Alternatives might be to allow the + generic FDT code to keep & expose a copy of the arguments taken from + the /chosen node's bootargs property, or to introduce a function like + early_init_dt_scan_chosen() that retrieves them without modification + to handle CONFIG_CMDLINE. Neither of these sounds particularly + cleaner though, and this way we at least keep the extra work in + arch/mips. + +Origin: upstream, https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7784cac697351f0cc0a4bb619594c0c99348c5aa +Signed-off-by: Paul Burton <paul.burton@mips.com> +Cc: linux-mips@vger.kernel.org + +--- a/arch/mips/kernel/setup.c ++++ b/arch/mips/kernel/setup.c +@@ -538,11 +538,88 @@ static void __init check_kernel_sections + } + } + +-#define USE_PROM_CMDLINE IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER) +-#define USE_DTB_CMDLINE IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_DTB) +-#define EXTEND_WITH_PROM IS_ENABLED(CONFIG_MIPS_CMDLINE_DTB_EXTEND) +-#define BUILTIN_EXTEND_WITH_PROM \ +- IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND) ++static void __init bootcmdline_append(const char *s, size_t max) ++{ ++ if (!s[0] || !max) ++ return; ++ ++ if (boot_command_line[0]) ++ strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); ++ ++ strlcat(boot_command_line, s, max); ++} ++ ++static int __init bootcmdline_scan_chosen(unsigned long node, const char *uname, ++ int depth, void *data) ++{ ++ bool *dt_bootargs = data; ++ const char *p; ++ int l; ++ ++ if (depth != 1 || !data || ++ (strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0)) ++ return 0; ++ ++ p = of_get_flat_dt_prop(node, "bootargs", &l); ++ if (p != NULL && l > 0) { ++ bootcmdline_append(p, min(l, COMMAND_LINE_SIZE)); ++ *dt_bootargs = true; ++ } ++ ++ return 1; ++} ++ ++static void __init bootcmdline_init(char **cmdline_p) ++{ ++ bool dt_bootargs = false; ++ ++ /* ++ * If CMDLINE_OVERRIDE is enabled then initializing the command line is ++ * trivial - we simply use the built-in command line unconditionally & ++ * unmodified. ++ */ ++ if (IS_ENABLED(CONFIG_CMDLINE_OVERRIDE)) { ++ strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); ++ return; ++ } ++ ++ /* ++ * If the user specified a built-in command line & ++ * MIPS_CMDLINE_BUILTIN_EXTEND, then the built-in command line is ++ * prepended to arguments from the bootloader or DT so we'll copy them ++ * to the start of boot_command_line here. Otherwise, empty ++ * boot_command_line to undo anything early_init_dt_scan_chosen() did. ++ */ ++ if (IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND)) ++ strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); ++ else ++ boot_command_line[0] = 0; ++ ++ /* ++ * If we're configured to take boot arguments from DT, look for those ++ * now. ++ */ ++ if (IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_DTB)) ++ of_scan_flat_dt(bootcmdline_scan_chosen, &dt_bootargs); ++ ++ /* ++ * If we didn't get any arguments from DT (regardless of whether that's ++ * because we weren't configured to look for them, or because we looked ++ * & found none) then we'll take arguments from the bootloader. ++ * plat_mem_setup() should have filled arcs_cmdline with arguments from ++ * the bootloader. ++ */ ++ if (IS_ENABLED(CONFIG_MIPS_CMDLINE_DTB_EXTEND) || !dt_bootargs) ++ bootcmdline_append(arcs_cmdline, COMMAND_LINE_SIZE); ++ ++ /* ++ * If the user specified a built-in command line & we didn't already ++ * prepend it, we append it to boot_command_line here. ++ */ ++ if (IS_ENABLED(CONFIG_CMDLINE_BOOL) && ++ !IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND)) ++ bootcmdline_append(builtin_cmdline, COMMAND_LINE_SIZE); ++} + + /* + * arch_mem_init - initialize memory management subsystem +@@ -570,48 +647,12 @@ static void __init arch_mem_init(char ** + { + extern void plat_mem_setup(void); + +- /* +- * Initialize boot_command_line to an innocuous but non-empty string in +- * order to prevent early_init_dt_scan_chosen() from copying +- * CONFIG_CMDLINE into it without our knowledge. We handle +- * CONFIG_CMDLINE ourselves below & don't want to duplicate its +- * content because repeating arguments can be problematic. +- */ +- strlcpy(boot_command_line, " ", COMMAND_LINE_SIZE); +- + /* call board setup routine */ + plat_mem_setup(); + memblock_set_bottom_up(true); + +-#if defined(CONFIG_CMDLINE_BOOL) && defined(CONFIG_CMDLINE_OVERRIDE) +- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); +-#else +- if ((USE_PROM_CMDLINE && arcs_cmdline[0]) || +- (USE_DTB_CMDLINE && !boot_command_line[0])) +- strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE); +- +- if (EXTEND_WITH_PROM && arcs_cmdline[0]) { +- if (boot_command_line[0]) +- strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); +- strlcat(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE); +- } +- +-#if defined(CONFIG_CMDLINE_BOOL) +- if (builtin_cmdline[0]) { +- if (boot_command_line[0]) +- strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); +- strlcat(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); +- } +- +- if (BUILTIN_EXTEND_WITH_PROM && arcs_cmdline[0]) { +- if (boot_command_line[0]) +- strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); +- strlcat(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE); +- } +-#endif +-#endif ++ bootcmdline_init(cmdline_p); + strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); +- + *cmdline_p = command_line; + + parse_early_param(); diff --git a/target/linux/ramips/patches-5.4/0002-MIPS-Always-define-builtin_cmdline.patch b/target/linux/ramips/patches-5.4/0002-MIPS-Always-define-builtin_cmdline.patch new file mode 100644 index 0000000000..03124d07d1 --- /dev/null +++ b/target/linux/ramips/patches-5.4/0002-MIPS-Always-define-builtin_cmdline.patch @@ -0,0 +1,44 @@ +From b7340422cc16c5deff100812f38114bb5ec81203 Mon Sep 17 00:00:00 2001 +From: Paul Burton <paul.burton@mips.com> +Date: Sat, 12 Oct 2019 20:43:36 +0000 +Subject: [PATCH] MIPS: Always define builtin_cmdline + +Commit 7784cac69735 ("MIPS: cmdline: Clean up boot_command_line +initialization") made use of builtin_cmdline conditional upon plain C if +statements rather than preprocessor #ifdef's. This caused build failures +for configurations with CONFIG_CMDLINE_BOOL=n where builtin_cmdline +wasn't defined, for example: + + arch/mips/kernel/setup.c: In function 'bootcmdline_init': +>> arch/mips/kernel/setup.c:582:30: error: 'builtin_cmdline' undeclared + (first use in this function); did you mean 'builtin_driver'? + strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); + ^~~~~~~~~~~~~~~ + builtin_driver + arch/mips/kernel/setup.c:582:30: note: each undeclared identifier is + reported only once for each function it appears in + +Fix this by defining builtin_cmdline as an empty string in the affected +configurations. All of the paths that use it should be optimized out +anyway so the data itself gets optimized away too. + +Signed-off-by: Paul Burton <paul.burton@mips.com> +Fixes: 7784cac69735 ("MIPS: cmdline: Clean up boot_command_line initialization") +Reported-by: kbuild test robot <lkp@intel.com> +Reported-by: Nathan Chancellor <natechancellor@gmail.com> +Cc: linux-mips@vger.kernel.org +--- + arch/mips/kernel/setup.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/arch/mips/kernel/setup.c ++++ b/arch/mips/kernel/setup.c +@@ -68,6 +68,8 @@ char __initdata arcs_cmdline[COMMAND_LIN + + #ifdef CONFIG_CMDLINE_BOOL + static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE; ++#else ++static const char builtin_cmdline[] __initconst = ""; + #endif + + /* diff --git a/target/linux/ramips/patches-5.4/0010-MIPS-add-bootargs-override-property.patch b/target/linux/ramips/patches-5.4/0010-MIPS-add-bootargs-override-property.patch new file mode 100644 index 0000000000..c19a0fb480 --- /dev/null +++ b/target/linux/ramips/patches-5.4/0010-MIPS-add-bootargs-override-property.patch @@ -0,0 +1,63 @@ +From f15d27f9c90ede4b16eb37f9ae573ef81c2b6996 Mon Sep 17 00:00:00 2001 +From: David Bauer <mail@david-bauer.net> +Date: Thu, 31 Dec 2020 18:49:12 +0100 +Subject: [PATCH] MIPS: add bootargs-override property + +Add support for the bootargs-override property to the chosen node +similar to the one used on ipq806x or mpc85xx. + +This is necessary, as the U-Boot used on some boards, notably the +Ubiquiti UniFi 6 Lite, overwrite the bootargs property of the chosen +node leading to a kernel panic when loading OpenWrt. + +Signed-off-by: David Bauer <mail@david-bauer.net> +--- + arch/mips/kernel/setup.c | 30 ++++++++++++++++++++++++++++++ + 1 file changed, 30 insertions(+) + +--- a/arch/mips/kernel/setup.c ++++ b/arch/mips/kernel/setup.c +@@ -571,8 +571,28 @@ static int __init bootcmdline_scan_chose + return 1; + } + ++static int __init bootcmdline_scan_chosen_override(unsigned long node, const char *uname, ++ int depth, void *data) ++{ ++ bool *dt_bootargs = data; ++ const char *p; ++ int l; ++ ++ if (depth != 1 || !data || strcmp(uname, "chosen") != 0) ++ return 0; ++ ++ p = of_get_flat_dt_prop(node, "bootargs-override", &l); ++ if (p != NULL && l > 0) { ++ strlcpy(boot_command_line, p, COMMAND_LINE_SIZE); ++ *dt_bootargs = true; ++ } ++ ++ return 1; ++} ++ + static void __init bootcmdline_init(char **cmdline_p) + { ++ bool dt_bootargs_override = false; + bool dt_bootargs = false; + + /* +@@ -586,6 +606,14 @@ static void __init bootcmdline_init(char + } + + /* ++ * If bootargs-override in the chosen node is set, use this as the ++ * command line ++ */ ++ of_scan_flat_dt(bootcmdline_scan_chosen_override, &dt_bootargs_override); ++ if (dt_bootargs_override) ++ return; ++ ++ /* + * If the user specified a built-in command line & + * MIPS_CMDLINE_BUILTIN_EXTEND, then the built-in command line is + * prepended to arguments from the bootloader or DT so we'll copy them |