6 files changed, 202 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 54504c6ee8..9ed834eb5b 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -398,6 +398,12 @@ tl-wr841n-v13)
 	ucidef_set_led_switch "lan4" "lan4" "$boardname:green:lan4" "switch0" "0x10"
 	ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
 	;;
+tplink,c2-v1)
+	ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch1" "0x1e"
+	ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch1" "0x01"
+	set_usb_led "$boardname:green:usb" "2-1"
+	set_wifi_led "$boardname:green:wlan"
+	;;
 tplink,c20-v1)
 	ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
 	ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index d2c15f8f46..c5e5549e25 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -335,6 +335,10 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
 		;;
+	tplink,c2-v1)
+		ucidef_add_switch "switch1" \
+			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
+		;;
 	tplink,tl-wr902ac-v3)
 		ucidef_add_switch "switch0" \
 			"4:lan" "6@eth0"
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 2f51add331..dd7a646a04 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -79,6 +79,7 @@ get_status_led() {
 	awapn2403|\
 	dir-645|\
 	sk-wb8|\
+	tplink,c2-v1|\
 	wrh-300cr)
 		status_led="$boardname:green:wps"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index ffdc5e73e0..26236047b4 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -253,6 +253,7 @@ platform_check_image() {
 	c20i|\
 	c50|\
 	mr200|\
+	tplink,c2-v1|\
 	tplink,c20-v1|\
 	tplink,c20-v4|\
 	tplink,c50-v3|\
diff --git a/target/linux/ramips/dts/ArcherC2-v1.dts b/target/linux/ramips/dts/ArcherC2-v1.dts
new file mode 100644
index 0000000000..6af75e39ce
--- /dev/null
+++ b/target/linux/ramips/dts/ArcherC2-v1.dts
@@ -0,0 +1,178 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "tplink,c2-v1", "ralink,mt7620a-soc";
+	model = "TP-Link Archer C2 v1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "i2c", "uartf", "wled", "ephy", "spi refclk";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		lan {
+			label = "c2-v1:green:lan";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+		};
+
+		usb {
+			label = "c2-v1:green:usb";
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "c2-v1:green:wps";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		wan {
+			label = "c2-v1:green:wan";
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan {
+			label = "c2-v1:green:wlan";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		reset_wps {
+			label = "reset_wps";
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+	};
+
+	rtl8367rb {
+		compatible = "realtek,rtl8367b", "rtl8367b";
+		cpu_port = <6>;
+		realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
+		mii-bus = <&mdio0>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x20000>;
+			read-only;
+		};
+
+		partition@20000 {
+			label = "firmware";
+			reg = <0x20000 0x7a0000>;
+		};
+
+		partition@7c0000 {
+			label = "config";
+			reg = <0x7c0000 0x10000>;
+			read-only;
+		};
+
+		rom: partition@7d0000 {
+			label = "rom";
+			reg = <0x7d0000 0x10000>;
+			read-only;
+		};
+
+		partition@7e0000 {
+			label = "romfile";
+			reg = <0x7e0000 0x10000>;
+			read-only;
+		};
+
+		radio: partition@7f0000 {
+			label = "radio";
+			reg = <0x7f0000 0x10000>;
+			read-only;
+		};
+	};
+};
+
+&ethernet {
+	status = "okay";
+	mtd-mac-address = <&rom 0xf100>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
+
+	port@5 {
+		status = "okay";
+		mediatek,fixed-link = <1000 1 1 1>;
+		phy-mode = "rgmii";
+	};
+
+	mdio0: mdio-bus {
+		status = "okay";
+	};
+};
+
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&wmac {
+	ralink,mtd-eeprom = <&radio 0>;
+	mtd-mac-address = <&rom 0xf100>;
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+
+	pcie-bridge {
+		mt76@0,0 {
+			reg = <0x0000 0 0 0 0>;
+			device_type = "pci";
+			mediatek,mtd-eeprom = <&radio 0x8000>;
+		};
+	};
+};
diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index b6499c8806..325e3104a7 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -472,6 +472,18 @@ define Device/tiny-ac
 endef
 TARGET_DEVICES += tiny-ac
 
+define Device/tplink_c2-v1
+  $(Device/Archer)
+  DTS := ArcherC2-v1
+  TPLINK_FLASHLAYOUT := 8Mmtk
+  TPLINK_HWID := 0xc7500001
+  TPLINK_HWREV := 50
+  IMAGES += factory.bin
+  DEVICE_TITLE := TP-Link Archer C2 v1
+  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport kmod-switch-rtl8366-smi kmod-switch-rtl8367b
+endef
+TARGET_DEVICES += tplink_c2-v1
+
 define Device/tplink_c20-v1
   $(Device/Archer)
   DTS := ArcherC20v1