diff options
Diffstat (limited to 'target/linux/ramips')
| -rw-r--r-- | target/linux/ramips/dts/mt7628an.dtsi | 3 | ||||
| -rw-r--r-- | target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch | 65 |
2 files changed, 61 insertions, 7 deletions
diff --git a/target/linux/ramips/dts/mt7628an.dtsi b/target/linux/ramips/dts/mt7628an.dtsi index 03507eb5c5..d2b95a68c9 100644 --- a/target/linux/ramips/dts/mt7628an.dtsi +++ b/target/linux/ramips/dts/mt7628an.dtsi @@ -340,8 +340,9 @@ #reset-cells = <1>; }; - usbphy: usbphy { + usbphy: usbphy@10120000 { compatible = "ralink,mt7628an-usbphy", "mediatek,mt7620-usbphy"; + reg = <0x10120000 4000>; #phy-cells = <1>; resets = <&rstctrl 22 &rstctrl 25>; diff --git a/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch b/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch index cc61c29ca5..30db4ab326 100644 --- a/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch +++ b/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch @@ -38,7 +38,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> +}; --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig -@@ -331,6 +331,14 @@ config PHY_XGENE +@@ -331,6 +331,14 @@ help This option enables support for APM X-Gene SoC multi-purpose PHY. @@ -55,14 +55,14 @@ Signed-off-by: John Crispin <blogic@openwrt.org> depends on RESET_CONTROLLER --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile -@@ -46,3 +46,4 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom- +@@ -46,3 +46,4 @@ obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o +obj-$(CONFIG_PHY_RALINK_USB) += phy-ralink-usb.o --- /dev/null +++ b/drivers/phy/phy-ralink-usb.c -@@ -0,0 +1,175 @@ +@@ -0,0 +1,228 @@ +/* + * Allwinner ralink USB phy driver + * @@ -99,6 +99,20 @@ Signed-off-by: John Crispin <blogic@openwrt.org> +#define RT_SYSC_REG_CLKCFG1 0x030 +#define RT_SYSC_REG_USB_PHY_CFG 0x05c + ++#define OFS_U2_PHY_AC0 0x00 ++#define OFS_U2_PHY_AC1 0x04 ++#define OFS_U2_PHY_AC2 0x08 ++#define OFS_U2_PHY_ACR0 0x10 ++#define OFS_U2_PHY_ACR1 0x14 ++#define OFS_U2_PHY_ACR2 0x18 ++#define OFS_U2_PHY_ACR3 0x1C ++#define OFS_U2_PHY_ACR4 0x20 ++#define OFS_U2_PHY_AMON0 0x24 ++#define OFS_U2_PHY_DCR0 0x60 ++#define OFS_U2_PHY_DCR1 0x64 ++#define OFS_U2_PHY_DTM0 0x68 ++#define OFS_U2_PHY_DTM1 0x6C ++ +#define RT_RSTCTRL_UDEV BIT(25) +#define RT_RSTCTRL_UHST BIT(22) +#define RT_SYSCFG1_USB0_HOST_MODE BIT(10) @@ -116,8 +130,40 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + struct reset_control *rsthost; + u32 clk; + struct phy *phy; ++ void __iomem *base; +}; + ++static void u2_phy_w32(struct ralink_usb_phy *phy, u32 val, u32 reg) ++{ ++ iowrite32(val, phy->base + reg); ++} ++ ++static u32 u2_phy_r32(struct ralink_usb_phy *phy, u32 reg) ++{ ++ return ioread32(phy->base + reg); ++} ++ ++static void ++u2_phy_init(struct ralink_usb_phy *phy) ++{ ++ u2_phy_r32(phy, OFS_U2_PHY_AC2); ++ u2_phy_r32(phy, OFS_U2_PHY_ACR0); ++ u2_phy_r32(phy, OFS_U2_PHY_DCR0); ++ ++ u2_phy_w32(phy, 0x00ffff02, OFS_U2_PHY_DCR0); ++ u2_phy_r32(phy, OFS_U2_PHY_DCR0); ++ u2_phy_w32(phy, 0x00555502, OFS_U2_PHY_DCR0); ++ u2_phy_r32(phy, OFS_U2_PHY_DCR0); ++ u2_phy_w32(phy, 0x00aaaa02, OFS_U2_PHY_DCR0); ++ u2_phy_r32(phy, OFS_U2_PHY_DCR0); ++ u2_phy_w32(phy, 0x00000402, OFS_U2_PHY_DCR0); ++ u2_phy_r32(phy, OFS_U2_PHY_DCR0); ++ u2_phy_w32(phy, 0x0048086a, OFS_U2_PHY_AC0); ++ u2_phy_w32(phy, 0x4400001c, OFS_U2_PHY_AC1); ++ u2_phy_w32(phy, 0xc0200000, OFS_U2_PHY_ACR3); ++ u2_phy_w32(phy, 0x02000000, OFS_U2_PHY_DTM0); ++} ++ +static int ralink_usb_phy_power_on(struct phy *_phy) +{ + struct ralink_usb_phy *phy = phy_get_drvdata(_phy); @@ -139,6 +185,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + */ + mdelay(10); + ++ if (!IS_ERR(phy->base)) ++ u2_phy_init(phy); ++ + /* print some status info */ + t = rt_sysc_r32(RT_SYSC_REG_USB_PHY_CFG); + dev_info(&phy->phy->dev, "remote usb device wakeup %s\n", @@ -155,13 +204,13 @@ Signed-off-by: John Crispin <blogic@openwrt.org> +{ + struct ralink_usb_phy *phy = phy_get_drvdata(_phy); + -+ /* disable the phy */ -+ rt_sysc_m32(phy->clk, 0, RT_SYSC_REG_CLKCFG1); -+ + /* assert the reset lines */ + reset_control_assert(phy->rstdev); + reset_control_assert(phy->rsthost); + ++ /* disable the phy */ ++ rt_sysc_m32(phy->clk, 0, RT_SYSC_REG_CLKCFG1); ++ + return 0; +} + @@ -187,6 +236,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + +static int ralink_usb_phy_probe(struct platform_device *pdev) +{ ++ struct resource *res; + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + const struct of_device_id *match; @@ -202,6 +252,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + + phy->clk = (int) match->data; + ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ phy->base = devm_ioremap_resource(&pdev->dev, res); ++ + phy->rsthost = devm_reset_control_get(&pdev->dev, "host"); + if (IS_ERR(phy->rsthost)) { + dev_err(dev, "host reset is missing\n"); |