diff options
Diffstat (limited to 'target/linux/ramips')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/01_leds | 6 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 7 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/lib/upgrade/platform.sh | 3 | ||||
| -rw-r--r-- | target/linux/ramips/dts/MIR3P.dts | 191 | ||||
| -rw-r--r-- | target/linux/ramips/image/mt7621.mk | 16 |
5 files changed, 221 insertions, 2 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 3a761decb1..9cca231ab6 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -235,6 +235,12 @@ mikrotik,rbm11g) miniembplug) set_wifi_led "$boardname:red:wlan" ;; +xiaomi,mir3p) + ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x10" "0x08" + ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x02" "0x08" + ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08" + ucidef_set_led_switch "lan3-amber" "LAN3 (amber)" "$boardname:amber:lan3" "switch0" "0x08" "0x08" + ;; mir3g) ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x02" "0x08" ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x08" "0x08" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 5221838547..890efa0d93 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -436,6 +436,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "4:lan" "0:wan" "6@eth0" ;; + xiaomi,mir3p) + ucidef_add_switch "switch0" \ + "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0" + ;; zbtlink,zbt-we1226|\ y1) ucidef_add_switch "switch0" \ @@ -562,7 +566,8 @@ ramips_setup_macs() lan_mac=$(mtd_get_mac_binary factory_info 13) wan_mac=$(macaddr_add "$lan_mac" 1) ;; - mir3g) + mir3g|\ + xiaomi,mir3p) lan_mac=$(mtd_get_mac_binary Factory 0xe006) ;; miwifi-mini) diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 14e9ac3d14..67b0f3e7f4 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -41,7 +41,8 @@ platform_do_upgrade() { r6220|\ netgear,r6350|\ ubnt-erx|\ - ubnt-erx-sfp) + ubnt-erx-sfp|\ + xiaomi,mir3p) nand_do_upgrade "$ARGV" ;; tplink,c50-v4) diff --git a/target/linux/ramips/dts/MIR3P.dts b/target/linux/ramips/dts/MIR3P.dts new file mode 100644 index 0000000000..cd929e5e33 --- /dev/null +++ b/target/linux/ramips/dts/MIR3P.dts @@ -0,0 +1,191 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7621.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "xiaomi,mir3p", "mediatek,mt7621-soc"; + model = "Xiaomi Mi Router 3 Pro"; + + aliases { + led-boot = &led_status_yellow; + led-failsafe = &led_status_red; + led-running = &led_status_blue; + led-upgrade = &led_status_yellow; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x1c000000>, <0x20000000 0x04000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led_status_red: status_red { + label = "mir3p:red:status"; + gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + }; + + led_status_blue: status_blue { + label = "mir3p:blue:status"; + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + }; + + led_status_yellow: status_yellow { + label = "mir3p:yellow:status"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + + wan_amber { + label = "mir3p:amber:wan"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + lan3_amber { + label = "mir3p:amber:lan3"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + }; + + lan2_amber { + label = "mir3p:amber:lan2"; + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; + }; + + lan1_amber { + label = "mir3p:amber:lan1"; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + }; + + button { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + reg_usb_vbus: regulator { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&xhci { + vbus-supply = <®_usb_vbus>; +}; + +&nand { + status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Bootloader"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "Config"; + reg = <0x40000 0x40000>; + }; + + partition@80000 { + label = "Bdata"; + reg = <0x80000 0x40000>; + read-only; + }; + + factory: partition@c0000 { + label = "Factory"; + reg = <0x0c0000 0x40000>; + read-only; + }; + + partition@100000 { + label = "crash"; + reg = <0x100000 0x40000>; + }; + + partition@140000 { + label = "crash_syslog"; + reg = <0x140000 0x80000>; + }; + + partition@1c0000 { + label = "reserved0"; + reg = <0x1c0000 0x40000>; + read-only; + }; + + /* We keep stock xiaomi firmware (kernel0) here */ + partition@200000 { + label = "kernel_stock"; + reg = <0x200000 0x400000>; + }; + + partition@600000 { + label = "kernel"; + reg = <0x600000 0x400000>; + }; + + partition@a00000 { + label = "ubi"; + reg = <0xa00000 0xf580000>; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "pci14c3,7615"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0000>; + }; +}; + +&pcie1 { + wifi@0,0 { + compatible = "pci14c3,7615"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0xe000>; + mediatek,portmap = "llllw"; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "jtag", "uart2", "uart3", "wdt"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 06f8bef86e..8b0b28a941 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -235,6 +235,22 @@ define Device/k2p endef TARGET_DEVICES += k2p +define Device/xiaomi_mir3p + DTS := MIR3P + BLOCKSIZE := 128k + PAGESIZE := 2048 + KERNEL_SIZE:= 4096k + UBINIZE_OPTS := -E 5 + IMAGE_SIZE := $(ralink_default_fw_size_32M) + DEVICE_TITLE := Xiaomi Mi Router 3 Pro + IMAGES += factory.bin + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata + IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | check-size $$$$(IMAGE_SIZE) + DEVICE_PACKAGES := \ + kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic uboot-envtools +endef +TARGET_DEVICES += xiaomi_mir3p + define Device/mir3g DTS := MIR3G BLOCKSIZE := 128k |