diff options
Diffstat (limited to 'target/linux/ramips')
3 files changed, 54 insertions, 11 deletions
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index d8b35ae30e..920c8a33a2 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -55,7 +55,7 @@ case "$FIRMWARE" in nw718 | \ rt-n15 | \ v22rw-2x2 | \ - wcr150gn | \ + wcr-150gn | \ whr-g300n | \ wr512-3gn) rt2x00_eeprom_extract "factory" 0 272 diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wcr150gn.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wcr150gn.c index 984bab7b85..0da27359b1 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wcr150gn.c +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wcr150gn.c @@ -22,6 +22,44 @@ #include "devices.h" +#define WCR150GN_GPIO_LED_USER 12 +#define WCR150GN_GPIO_LED_POWER 8 +#define WCR150GN_GPIO_BUTTON_WPS 10 +#define WCR150GN_GPIO_BUTTON_RESET 0 +#define WCR150GN_BUTTONS_POLL_INTERVAL 20 + +static struct gpio_led wcr150gn_leds_gpio[] __initdata = { + { + .name = "wcr150gn:amber:user", + .gpio = WCR150GN_GPIO_LED_USER, + .active_low = 1, + }, + { + .name = "wcr150gn:amber:power", + .gpio = WCR150GN_GPIO_LED_POWER, + .active_low = 1, + } +}; + +static struct gpio_button wcr150gn_gpio_buttons[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .threshold = 3, + .gpio = WCR150GN_GPIO_BUTTON_WPS, + .active_low = 1, + }, + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .threshold = 10, + .gpio = WCR150GN_GPIO_BUTTON_RESET, + .active_low = 1, + } +}; + #ifdef CONFIG_MTD_PARTITIONS static struct mtd_partition wcr150gn_partitions[] = { { @@ -33,18 +71,24 @@ static struct mtd_partition wcr150gn_partitions[] = { .name = "config", .offset = 0x030000, .size = 0x040000, + .mask_flags = MTD_WRITEABLE, }, { .name = "factory", .offset = 0x040000, .size = 0x050000, + .mask_flags = MTD_WRITEABLE, }, { .name = "kernel", .offset = 0x050000, - .size = 0x120000, + .size = 0x0d0000, }, { .name = "rootfs", .offset = 0x120000, - .size = 0x400000, + .size = 0x2e0000, + }, { + .name = "firmware", + .offset = 0x050000, + .size = 0x3b0000, } }; #endif /* CONFIG_MTD_PARTITIONS */ @@ -60,10 +104,16 @@ static void __init wcr150gn_init(void) { rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); rt305x_register_flash(0, &wcr150gn_flash_data); + ramips_register_gpio_leds(-1, ARRAY_SIZE(wcr150gn_leds_gpio), + wcr150gn_leds_gpio); + ramips_register_gpio_buttons(-1, WCR150GN_BUTTONS_POLL_INTERVAL, + ARRAY_SIZE(wcr150gn_gpio_buttons), + wcr150gn_gpio_buttons); rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; rt305x_register_ethernet(); rt305x_register_wifi(); rt305x_register_wdt(); + rt305x_register_usb(); } MIPS_MACHINE(RAMIPS_MACH_WCR150GN, "WCR150GN", "Sparklan WCR-150GN", diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 7d32155dc7..7f0ef00e46 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -202,15 +202,8 @@ define Image/Build/Profile/MOFI35003GN $(call Image/Build/Template/GENERIC_8M,$(1),mofi3500-3gn,MOFI3500-3GN) endef -mtdlayout_wcr150gn=mtdparts=physmap-flash.0:192k(bootloader)ro,64k(config),64k(factory),832k(kernel),2944k(rootfs),3776k@0x50000(firmware) -mtd_wcr150gn_kernel_part_size=851968 -mtd_wcr150gn_rootfs_part_size=3014656 -define Image/Build/Template/WCR150GN - $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_wcr150gn,$(mtd_wcr150gn_kernel_part_size),$(mtd_wcr150gn_rootfs_part_size)) -endef - define Image/Build/Profile/WCR150GN - $(call Image/Build/Template/WCR150GN,$(1),wcr150gn,WCR150GN) + $(call Image/Build/Template/GENERIC_4M,$(1),wcr150gn,WCR150GN) endef |