aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ramips')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/diag.sh2
-rw-r--r--target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom1
-rwxr-xr-xtarget/linux/ramips/base-files/etc/uci-defaults/02_network2
-rw-r--r--target/linux/ramips/base-files/lib/preinit/06_set_iface_mac1
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ramips/dts/W150M.dts98
-rw-r--r--target/linux/ramips/image/Makefile3
8 files changed, 110 insertions, 1 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index dbde1f7775..866003c28c 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -9,7 +9,7 @@ get_status_led() {
3g-6200n)
status_led="edimax:green:power"
;;
- 3g300m)
+ 3g300m | w150m)
status_led="tenda:blue:ap"
;;
argus-atp52b)
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 6dd36d7403..b6490b5b58 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -85,6 +85,7 @@ case "$FIRMWARE" in
v11st-fe | \
v22rw-2x2 | \
w306r-v20 | \
+ w150m | \
w502u | \
wcr-150gn | \
whr-g300n | \
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index d2400870c6..98aefbdf32 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -38,6 +38,7 @@ ramips_setup_interfaces()
case $board in
3g300m | \
+ w150m | \
all0256n | \
all5002 | \
broadway)
@@ -156,6 +157,7 @@ ramips_setup_macs()
;;
3g-6200n | \
3g300m | \
+ w150m | \
air3gii | \
argus-atp52b | \
bc2 | \
diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index 985d1bc8f7..7824e2b252 100644
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -12,6 +12,7 @@ preinit_set_mac_address() {
3g-6200n |\
3g-6200nl |\
3g300m | \
+ w150m | \
mzk-w300nh2 |\
wl-330n |\
wl-330n3g)
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 4948e5b5cc..c89dd469a7 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -180,6 +180,9 @@ ramips_board_detect() {
*"Tenda W306R V2.0")
name="w306r-v20"
;;
+ *"Tenda W150M")
+ name="w150m"
+ ;;
*"TEW-691GR")
name="tew-691gr"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index e2a55feabb..34d2c54c84 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -17,6 +17,7 @@ platform_check_image() {
3g-6200n | \
3g-6200nl | \
3g300m | \
+ w150m | \
air3gii | \
all0239-3g | \
all0256n | \
diff --git a/target/linux/ramips/dts/W150M.dts b/target/linux/ramips/dts/W150M.dts
new file mode 100644
index 0000000000..1652fcd6da
--- /dev/null
+++ b/target/linux/ramips/dts/W150M.dts
@@ -0,0 +1,98 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "3G300M", "ralink,rt3050-soc";
+ model = "Tenda 3G300M";
+
+ memorydetect {
+ ralink,memory = <0x0 0x200000 0x4000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3872k@0x50000(firmware)";
+ };
+
+ palmbus@10000000 {
+ sysc@0 {
+ ralink,pinmmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii", "jtag";
+ ralink,uartmux = "gpio";
+ ralink,wdtmux = <1>;
+ };
+
+ gpio0: gpio@600 {
+ status = "okay";
+ };
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+
+ bank-width = <2>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ 3grouter {
+ label = "tenda:blue:3grouter";
+ gpios = <&gpio0 11 1>;
+ };
+ ap {
+ label = "tenda:blue:ap";
+ gpios = <&gpio0 12 1>;
+ };
+ wisprouter {
+ label = "tenda:blue:wisprouter";
+ gpios = <&gpio0 9 1>;
+ };
+ wirelessrouter {
+ label = "tenda:blue:wirelessrouter";
+ gpios = <&gpio0 13 1>;
+ };
+ 3g {
+ label = "tenda:blue:3g";
+ gpios = <&gpio0 7 1>;
+ };
+ wpsreset {
+ label = "tenda:blue:wpsreset";
+ gpios = <&gpio0 14 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 0 1>;
+ linux,code = <0x198>;
+ };
+ mode {
+ label = "mode";
+ gpios = <&gpio0 10 1>;
+ linux,code = <0x100>;
+ };
+ };
+
+ ethernet@10100000 {
+ status = "okay";
+ };
+
+ esw@10110000 {
+ status = "okay";
+ ralink,portmap = <0x2f>;
+ };
+
+ wmac@10180000 {
+ status = "okay";
+ };
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 9909d50d33..0002eb4974 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -340,6 +340,8 @@ Image/Build/Profile/SL-R7205=$(call BuildFirmware/Default4M/$(1),$(1),sl-r7205,S
Image/Build/Profile/V22RW-2X2=$(call BuildFirmware/Default4M/$(1),$(1),v22rw-2x2,V22RW-2X2)
+Image/Build/Profile/W150M=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),w150m,W150M,$(ralink_default_fw_size_4M),W150M Kernel Image,factory)
+
Image/Build/Profile/W306R_V20=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),w306r-v20,W306R_V20,$(ralink_default_fw_size_4M),linkn Kernel Image,factory)
Image/Build/Profile/W502U=$(call BuildFirmware/Default8M/$(1),$(1),w502u,W502U)
@@ -440,6 +442,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/SL-R7205,$(1))
$(call Image/Build/Profile/UR-326N4G,$(1))
$(call Image/Build/Profile/V22RW-2X2,$(1))
+ $(call Image/Build/Profile/W150M,$(1))
$(call Image/Build/Profile/W306R_V20,$(1))
$(call Image/Build/Profile/W502U,$(1))
$(call Image/Build/Profile/WCR150GN,$(1))