diff options
Diffstat (limited to 'target/linux/ramips/rt305x')
4 files changed, 400 insertions, 0 deletions
diff --git a/target/linux/ramips/rt305x/base-files/etc/board.d/01_leds b/target/linux/ramips/rt305x/base-files/etc/board.d/01_leds new file mode 100755 index 0000000000..ae813e85d6 --- /dev/null +++ b/target/linux/ramips/rt305x/base-files/etc/board.d/01_leds @@ -0,0 +1,109 @@ +#!/bin/sh + +. /lib/functions/leds.sh +. /lib/functions/uci-defaults.sh + +set_wifi_led() { + ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}" +} + + +board=$(board_name) +boardname="${board##*,}" + +board_config_update + +led_wlan="$(get_dt_led wlan)" +[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt" + +case $board in +7links,px-4885-4m|\ +7links,px-4885-8m) + set_wifi_led "px-4885:orange:wifi" + ;; +airlive,air3gii|\ +aximcom,mr-102n|\ +edimax,3g-6200nl|\ +netgear,wnce2001) + set_wifi_led "$boardname:green:wlan" + ;; +alfa-network,w502u|\ +dlink,dir-300-b1|\ +dlink,dir-300-b7|\ +dlink,dir-320-b1|\ +dlink,dir-600-b1|\ +dlink,dir-610-a1|\ +dlink,dir-615-d|\ +dlink,dir-615-h1|\ +dlink,dir-620-a1|\ +engenius,esr-9753|\ +hilink,hlk-rm04|\ +nexx,wt1520-4m|\ +nexx,wt1520-8m|\ +skyline,sl-r7205|\ +tenda,w306r-v2|\ +zyxel,keenetic-start|\ +zyxel,keenetic|\ +zyxel,nbg-419n-v2) + set_wifi_led "rt2800pci-phy0::radio" + ;; +allnet,all0256n-4m|\ +allnet,all0256n-8m) + ucidef_set_rssimon "wlan0" "200000" "1" + ucidef_set_led_rssi "rssilow" "RSSILOW" "all0256n:green:rssilow" "wlan0" "1" "40" "0" "6" + ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "all0256n:green:rssimed" "wlan0" "30" "80" "-29" "5" + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "all0256n:green:rssihigh" "wlan0" "70" "100" "-69" "8" + set_wifi_led "rt2800pci-phy0::radio" + ;; +alphanetworks,asl26555-8m|\ +alphanetworks,asl26555-16m) + ucidef_set_led_netdev "eth" "ETH" "asl26555:green:eth" "eth0" + set_wifi_led "asl26555:green:wlan" + ;; +asiarf,awapn2403) + set_wifi_led "rt2800soc-phy0::radio" + ;; +dlink,dcs-930l-b1) + ucidef_set_led_netdev "wifi" "WiFi" "$boardname:blue:wps" + ;; +dlink,dir-620-d1|\ +trendnet,tew-714tru) + set_wifi_led "$boardname:green:wifi" + ;; +edimax,3g-6200n|\ +planex,mzk-w300nh2) + set_wifi_led "$boardname:amber:wlan" + ;; +fon,fonera-20n) + set_wifi_led "$boardname:orange:wifi" + ;; +hauppauge,broadway) + set_wifi_led "$boardname:red:wps_active" + ;; +hootoo,ht-tm02) + ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:lan" "eth0" + set_wifi_led "$boardname:blue:wlan" + ;; +huawei,hg255d) + set_wifi_led "$boardname:green:wlan" + ucidef_set_led_netdev "internet" "internet" "$boardname:green:internet" "eth0.2" + ;; +intenso,memory2move) + set_wifi_led "$boardname:blue:wifi" + ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:wan" "eth0" + ;; +omnima,miniembplug) + set_wifi_led "$boardname:red:wlan" + ;; +vocore,vocore-8m|\ +vocore,vocore-16m) + ucidef_set_led_netdev "eth" "ETH" "vocore:orange:eth" "eth0" + ;; +zorlik,zl5900v2) + ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" eth0 + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/ramips/rt305x/base-files/etc/board.d/02_network b/target/linux/ramips/rt305x/base-files/etc/board.d/02_network new file mode 100755 index 0000000000..326bc8a3df --- /dev/null +++ b/target/linux/ramips/rt305x/base-files/etc/board.d/02_network @@ -0,0 +1,228 @@ +#!/bin/sh + +. /lib/functions.sh +. /lib/functions/uci-defaults.sh +. /lib/functions/system.sh + +ramips_setup_rt3x5x_vlans() +{ + if [ ! -x /sbin/swconfig ]; then + # legacy default + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + return + fi + local wanports="" + local lanports="" + for port in 5 4 3 2 1 0; do + if [ "$(swconfig dev rt305x port $port get disable)" = "1" ]; then + continue + fi + if [ "$(swconfig dev rt305x port $port get lan)" = "0" ]; then + wanports="$port:wan $wanports" + else + lanports="$port:lan $lanports" + fi + done + ucidef_add_switch "rt305x" $lanports $wanports "6t@eth0" +} + +ramips_setup_interfaces() +{ + local board="$1" + + case $board in + accton,wr6202|\ + alfa-network,w502u|\ + netcore,nw718|\ + petatel,psr-680w|\ + skyline,sl-r7205|\ + upvel,ur-336un) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ;; + allnet,all0256n-4m|\ + allnet,all0256n-8m|\ + allnet,all5002|\ + allnet,all5003|\ + dlink,dcs-930l-b1|\ + dlink,dcs-930|\ + hame,mpr-a2|\ + hauppauge,broadway|\ + hootoo,ht-tm02|\ + intenso,memory2move|\ + netgear,wnce2001|\ + tenda,3g150b|\ + tenda,3g300m|\ + tenda,w150m|\ + unbranded,a5-v11|\ + wansview,ncs601w|\ + zorlik,zl5900v2) + ucidef_add_switch "switch0" + ucidef_add_switch_attr "switch0" "enable" "false" + ucidef_set_interface_lan "eth0" + ;; + alphanetworks,asl26555-8m|\ + alphanetworks,asl26555-16m) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0" + ;; + argus,atp-52b|\ + asiarf,awm002-evb-4m|\ + asiarf,awm002-evb-8m|\ + jcg,jhr-n805r|\ + jcg,jhr-n825r|\ + jcg,jhr-n926r|\ + planex,mzk-wdpr|\ + upvel,ur-326n4g) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" + ;; + asiarf,awapn2403) + ucidef_add_switch "switch0" \ + "0:lan" "1:wan" "6@eth0" + ;; + asus,wl-330n|\ + easyacc,wizard-8800) + ucidef_set_interface_lan "eth0.1" + ;; + aximcom,mr-102n) + ucidef_set_interface_lan "eth0.2" + ;; + belkin,f5d8235-v2|\ + trendnet,tew-714tru) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0" + ;; + buffalo,whr-g300n|\ + dlink,dir-300-b7|\ + dlink,dir-320-b1|\ + dlink,dir-610-a1|\ + edimax,3g-6200n|\ + hilink,hlk-rm04|\ + nixcore,x1-16m|\ + nixcore,x1-8m|\ + planex,mzk-w300nh2|\ + zyxel,keenetic) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" + ;; + dlink,dir-615-h1) + ucidef_add_switch "switch0" \ + "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0" + ;; + huawei,d105) + ucidef_set_interface_lan "eth0" + ;; + huawei,hg255d) + ucidef_add_switch "switch0" \ + "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" + ;; + nexx,wt1520-4m|\ + nexx,wt1520-8m) + ucidef_add_switch "switch0" \ + "0:lan" "4:wan" "6@eth0" + ;; + planex,mzk-dp150n|\ + vocore,vocore-8m|\ + vocore,vocore-16m) + ucidef_add_switch "switch0" \ + "0:lan" "4:lan" "6t@eth0" + ;; + sitecom,wl-351) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" + ;; + sparklan,wcr-150gn) + ucidef_add_switch "switch0" \ + "0:lan" "6t@eth0" + ;; + trendnet,tew-638apb-v2) + ucidef_add_switch "switch0" \ + "4:lan" "6@eth0" + ;; + wiznet,wizfi630a) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:wan" "6@eth0" + ;; + zyxel,keenetic-start) + ucidef_add_switch "switch0" \ + "0:lan:3" "1:lan:2" "2:lan:1" "3:lan:0" "4:wan" "6@eth0" + ;; + *) + RT3X5X=$(grep -E "(RT3.5|RT5350)" /proc/cpuinfo) + if [ -n "${RT3X5X}" ]; then + ramips_setup_rt3x5x_vlans + else + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + fi + ;; + esac +} + +ramips_setup_macs() +{ + local board="$1" + local lan_mac="" + local wan_mac="" + local label_mac="" + + case $board in + 8devices,carambola|\ + alfa-network,w502u|\ + arcwireless,freestation5|\ + netgear,wnce2001) + wan_mac=$(mtd_get_mac_binary factory 0x2e) + ;; + buffalo,whr-g300n|\ + zyxel,keenetic-start) + # This empty case has to be kept for devices without any MAC address adjustments + ;; + dlink,dir-300-b7|\ + dlink,dir-320-b1|\ + dlink,dir-620-a1|\ + engenius,esr-9753|\ + hame,mpr-a1|\ + hauppauge,broadway|\ + huawei,d105|\ + hilink,hlk-rm04|\ + nexaira,bc2|\ + petatel,psr-680w|\ + skyline,sl-r7205) + lan_mac=$(macaddr_setbit_la "$(cat /sys/class/net/eth0/address)") + wan_mac=$(macaddr_add "$lan_mac" 1) + ;; + dlink,dir-615-d|\ + dlink,dir-615-h1) + wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1) + label_mac=$(cat /sys/class/ieee80211/phy0/macaddress) + ;; + poray,m3|\ + poray,m4-4m|\ + poray,m4-8m|\ + poray,x5|\ + poray,x8) + lan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" -2) + ;; + sparklan,wcr-150gn|\ + wiznet,wizfi630a) + wan_mac=$(mtd_get_mac_binary factory 0x28) + ;; + tenda,w306r-v2) + wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 5) + ;; + *) + wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1) + ;; + esac + + [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac + [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac + [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac +} + +board_config_update +board=$(board_name) +ramips_setup_interfaces $board +ramips_setup_macs $board +board_config_flush + +exit 0 diff --git a/target/linux/ramips/rt305x/base-files/lib/preinit/04_handle_checksumming b/target/linux/ramips/rt305x/base-files/lib/preinit/04_handle_checksumming new file mode 100644 index 0000000000..9a2361d057 --- /dev/null +++ b/target/linux/ramips/rt305x/base-files/lib/preinit/04_handle_checksumming @@ -0,0 +1,43 @@ +#!/bin/sh + +# Netgear WNCE2001 has does a checksum check on boot and goes into recovery +# tftp mode when the check fails. Initializing the JFFS2 partition triggers +# this, so we make sure to zero checksum and size to be checksummed before +# that happens, so this needs to run very early during boot. + +do_checksumming_disable() { + . /lib/functions.sh + + local board=$(board_name) + + case "$board" in + netgear,wnce2001) + echo "Board is WNCE2001, updating checksum partition..." + local zeroes=/dev/zero + local tmpfile=/tmp/wnce2001_checksum + local partname=checksum + local mtd=$(find_mtd_part $partname) + dd if=$mtd of=$tmpfile bs=80 count=1 2>/dev/null + signature=$(dd if=$tmpfile bs=1 skip=24 count=20 2>/dev/null) + checksum=$(dd if=$tmpfile bs=1 count=4 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"') + if [ "$signature" != "RT3052-AP-WNCE2001-3" ]; then + echo "Signature of checksum partition is wrong, bailing." + return 0 + fi + if [ "$checksum" != "00000000" ]; then + echo "Checksum is set, zeroing." + # zero out checksum + dd if=$zeroes of=$tmpfile conv=notrunc bs=1 seek=0 count=4 2>/dev/null + # zero out bytecount to be checksummed + dd if=$zeroes of=$tmpfile conv=notrunc bs=1 seek=60 count=4 2>/dev/null + mtd write $tmpfile $partname + else + echo "Checksum is already zero, nothing to do." + fi + ;; + esac + + return 0 +} + +boot_hook_add preinit_main do_checksumming_disable diff --git a/target/linux/ramips/rt305x/base-files/lib/upgrade/platform.sh b/target/linux/ramips/rt305x/base-files/lib/upgrade/platform.sh new file mode 100755 index 0000000000..786d57fc70 --- /dev/null +++ b/target/linux/ramips/rt305x/base-files/lib/upgrade/platform.sh @@ -0,0 +1,20 @@ +# +# Copyright (C) 2010 OpenWrt.org +# + +PART_NAME=firmware +REQUIRE_IMAGE_METADATA=1 + +platform_check_image() { + return 0 +} + +platform_do_upgrade() { + local board=$(board_name) + + case "$board" in + *) + default_do_upgrade "$1" + ;; + esac +} |