diff options
Diffstat (limited to 'target/linux/ramips/patches-4.3')
5 files changed, 20 insertions, 31 deletions
diff --git a/target/linux/ramips/patches-4.3/0002-MIPS-ralink-add-MT7621-defconfig.patch b/target/linux/ramips/patches-4.3/0002-MIPS-ralink-add-MT7621-defconfig.patch index 3bb7e2f2e4..d788f2f076 100644 --- a/target/linux/ramips/patches-4.3/0002-MIPS-ralink-add-MT7621-defconfig.patch +++ b/target/linux/ramips/patches-4.3/0002-MIPS-ralink-add-MT7621-defconfig.patch @@ -9,9 +9,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> 1 file changed, 197 insertions(+) create mode 100644 arch/mips/configs/mt7621_defconfig -diff --git a/arch/mips/configs/mt7621_defconfig b/arch/mips/configs/mt7621_defconfig -new file mode 100644 -index 0000000..7719471 --- /dev/null +++ b/arch/mips/configs/mt7621_defconfig @@ -0,0 +1,197 @@ @@ -212,6 +209,3 @@ index 0000000..7719471 +CONFIG_CRC32_SARWATE=y +# CONFIG_XZ_DEC_X86 is not set +CONFIG_AVERAGE=y --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0003-MIPS-ralink-cleanup-early_printk.patch b/target/linux/ramips/patches-4.3/0003-MIPS-ralink-cleanup-early_printk.patch index e2b2ba5e00..a21f5c6180 100644 --- a/target/linux/ramips/patches-4.3/0003-MIPS-ralink-cleanup-early_printk.patch +++ b/target/linux/ramips/patches-4.3/0003-MIPS-ralink-cleanup-early_printk.patch @@ -11,8 +11,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> arch/mips/ralink/early_printk.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) -diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c -index 255d695..c04ee53 100644 --- a/arch/mips/ralink/early_printk.c +++ b/arch/mips/ralink/early_printk.c @@ -25,11 +25,13 @@ @@ -61,6 +59,3 @@ index 255d695..c04ee53 100644 if (IS_ENABLED(CONFIG_SOC_MT7621) || soc_is_mt7628()) { uart_w32(ch, UART_TX); while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0) --- -1.7.10.4 - diff --git a/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch b/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch index f511b8838e..cc61c29ca5 100644 --- a/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch +++ b/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch @@ -38,7 +38,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> +}; --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig -@@ -331,6 +331,14 @@ +@@ -331,6 +331,14 @@ config PHY_XGENE help This option enables support for APM X-Gene SoC multi-purpose PHY. @@ -55,7 +55,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> depends on RESET_CONTROLLER --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile -@@ -46,3 +46,4 @@ +@@ -46,3 +46,4 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom- obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o diff --git a/target/linux/ramips/patches-4.3/0033-USB-add-xhci-hooks.patch b/target/linux/ramips/patches-4.3/0033-USB-add-xhci-hooks.patch index 07c2eac015..db29293584 100644 --- a/target/linux/ramips/patches-4.3/0033-USB-add-xhci-hooks.patch +++ b/target/linux/ramips/patches-4.3/0033-USB-add-xhci-hooks.patch @@ -5391,7 +5391,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> /* TODO: copied from ehci-hcd.c - can this be refactored? */ /* * xhci_handshake - spin reading hc until handshake completes or fails -@@ -198,7 +220,7 @@ int xhci_reset(struct xhci_hcd *xhci) +@@ -208,7 +230,7 @@ int xhci_reset(struct xhci_hcd *xhci) return ret; } @@ -5400,7 +5400,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> static int xhci_free_msi(struct xhci_hcd *xhci) { int i; -@@ -448,6 +470,11 @@ static void compliance_mode_recovery(uns +@@ -458,6 +480,11 @@ static void compliance_mode_recovery(uns "Attempting compliance mode recovery"); hcd = xhci->shared_hcd; @@ -5412,7 +5412,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> if (hcd->state == HC_STATE_SUSPENDED) usb_hcd_resume_root_hub(hcd); -@@ -495,6 +522,9 @@ static bool xhci_compliance_mode_recover +@@ -505,6 +532,9 @@ static bool xhci_compliance_mode_recover { const char *dmi_product_name, *dmi_sys_vendor; @@ -5422,7 +5422,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME); dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR); if (!dmi_product_name || !dmi_sys_vendor) -@@ -540,6 +570,10 @@ int xhci_init(struct usb_hcd *hcd) +@@ -550,6 +580,10 @@ int xhci_init(struct usb_hcd *hcd) xhci_dbg_trace(xhci, trace_xhci_dbg_init, "xHCI doesn't need link TRB QUIRK"); } @@ -5433,7 +5433,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> retval = xhci_mem_init(xhci, GFP_KERNEL); xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_init"); -@@ -624,7 +658,11 @@ int xhci_run(struct usb_hcd *hcd) +@@ -634,7 +668,11 @@ int xhci_run(struct usb_hcd *hcd) "// Set the interrupt modulation register"); temp = readl(&xhci->ir_set->irq_control); temp &= ~ER_IRQ_INTERVAL_MASK; @@ -5445,7 +5445,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> writel(temp, &xhci->ir_set->irq_control); /* Set the HCD state before we enable the irqs */ -@@ -649,6 +687,9 @@ int xhci_run(struct usb_hcd *hcd) +@@ -659,6 +697,9 @@ int xhci_run(struct usb_hcd *hcd) xhci_queue_vendor_command(xhci, command, 0, 0, 0, TRB_TYPE(TRB_NEC_GET_FW)); } @@ -5455,7 +5455,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_run for USB2 roothub"); return 0; -@@ -1639,6 +1680,14 @@ int xhci_drop_endpoint(struct usb_hcd *h +@@ -1649,6 +1690,14 @@ int xhci_drop_endpoint(struct usb_hcd *h u32 drop_flag; u32 new_add_flags, new_drop_flags; int ret; @@ -5470,7 +5470,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> ret = xhci_check_args(hcd, udev, ep, 1, true, __func__); if (ret <= 0) -@@ -1688,6 +1737,40 @@ int xhci_drop_endpoint(struct usb_hcd *h +@@ -1698,6 +1747,40 @@ int xhci_drop_endpoint(struct usb_hcd *h xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep); @@ -5511,7 +5511,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n", (unsigned int) ep->desc.bEndpointAddress, udev->slot_id, -@@ -1720,6 +1803,19 @@ int xhci_add_endpoint(struct usb_hcd *hc +@@ -1730,6 +1813,19 @@ int xhci_add_endpoint(struct usb_hcd *hc u32 new_add_flags, new_drop_flags; struct xhci_virt_device *virt_dev; int ret = 0; @@ -5531,7 +5531,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> ret = xhci_check_args(hcd, udev, ep, 1, true, __func__); if (ret <= 0) { -@@ -1783,6 +1879,56 @@ int xhci_add_endpoint(struct usb_hcd *hc +@@ -1793,6 +1889,56 @@ int xhci_add_endpoint(struct usb_hcd *hc return -ENOMEM; } @@ -5588,7 +5588,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs); new_add_flags = le32_to_cpu(ctrl_ctx->add_flags); -@@ -4446,8 +4592,14 @@ static u16 xhci_call_host_update_timeout +@@ -4456,8 +4602,14 @@ static u16 xhci_call_host_update_timeout u16 *timeout) { if (state == USB3_LPM_U1) @@ -5603,7 +5603,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> return xhci_calculate_u2_timeout(xhci, udev, desc); return USB3_LPM_DISABLED; -@@ -4839,7 +4991,9 @@ int xhci_gen_setup(struct usb_hcd *hcd, +@@ -4849,7 +5001,9 @@ int xhci_gen_setup(struct usb_hcd *hcd, hcd->self.no_sg_constraint = 1; /* XHCI controllers don't stop the ep queue on short packets :| */ @@ -5613,7 +5613,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> if (usb_hcd_is_primary_hcd(hcd)) { xhci = hcd_to_xhci(hcd); -@@ -4900,6 +5054,10 @@ int xhci_gen_setup(struct usb_hcd *hcd, +@@ -4910,6 +5064,10 @@ int xhci_gen_setup(struct usb_hcd *hcd, return retval; xhci_dbg(xhci, "Reset complete\n"); @@ -5624,7 +5624,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> /* Set dma_mask and coherent_dma_mask to 64-bits, * if xHC supports 64-bit addressing */ if (HCC_64BIT_ADDR(xhci->hcc_params) && -@@ -5005,8 +5163,57 @@ MODULE_DESCRIPTION(DRIVER_DESC); +@@ -5015,8 +5173,57 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_LICENSE("GPL"); diff --git a/target/linux/ramips/patches-4.3/0065-mt7688-fixes.patch b/target/linux/ramips/patches-4.3/0065-mt7688-fixes.patch index 37b149c069..99a8f932e3 100644 --- a/target/linux/ramips/patches-4.3/0065-mt7688-fixes.patch +++ b/target/linux/ramips/patches-4.3/0065-mt7688-fixes.patch @@ -1,6 +1,6 @@ --- a/arch/mips/ralink/mt7620.c +++ b/arch/mips/ralink/mt7620.c -@@ -104,31 +104,31 @@ +@@ -104,31 +104,31 @@ static struct rt2880_pmx_group mt7620a_p }; static struct rt2880_pmx_func pwm1_grp_mt7628[] = { @@ -37,7 +37,7 @@ }; static struct rt2880_pmx_func i2c_grp_mt7628[] = { -@@ -140,21 +140,21 @@ +@@ -140,21 +140,21 @@ static struct rt2880_pmx_func i2c_grp_mt static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 36, 1) }; static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 37, 1) }; @@ -62,7 +62,7 @@ }; static struct rt2880_pmx_func i2s_grp_mt7628[] = { -@@ -449,6 +449,8 @@ +@@ -449,6 +449,8 @@ void __init ralink_clk_init(void) ralink_clk_add("10000b00.spi", sys_rate); ralink_clk_add("10000b40.spi", sys_rate); ralink_clk_add("10000c00.uartlite", periph_rate); @@ -71,7 +71,7 @@ ralink_clk_add("10180000.wmac", xtal_rate); if (IS_ENABLED(CONFIG_USB) && -@@ -571,13 +573,13 @@ +@@ -571,13 +573,13 @@ void prom_soc_init(struct ralink_soc_inf cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0); |