aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/patches-4.3/0009-PCI-MIPS-adds-mt7620a-pcie-driver.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ramips/patches-4.3/0009-PCI-MIPS-adds-mt7620a-pcie-driver.patch')
-rw-r--r--target/linux/ramips/patches-4.3/0009-PCI-MIPS-adds-mt7620a-pcie-driver.patch455
1 files changed, 455 insertions, 0 deletions
diff --git a/target/linux/ramips/patches-4.3/0009-PCI-MIPS-adds-mt7620a-pcie-driver.patch b/target/linux/ramips/patches-4.3/0009-PCI-MIPS-adds-mt7620a-pcie-driver.patch
new file mode 100644
index 0000000000..2f03f1d496
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0009-PCI-MIPS-adds-mt7620a-pcie-driver.patch
@@ -0,0 +1,455 @@
+From 41aa7fc236fdb1f4c9b8b10df9b71f0d248cb36b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:11:12 +0100
+Subject: [PATCH 09/53] PCI: MIPS: adds mt7620a pcie driver
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/include/asm/mach-ralink/mt7620.h | 1 +
+ arch/mips/pci/Makefile | 1 +
+ arch/mips/pci/pci-mt7620.c | 396 ++++++++++++++++++++++++++++
+ arch/mips/ralink/Kconfig | 1 +
+ 4 files changed, 399 insertions(+)
+ create mode 100644 arch/mips/pci/pci-mt7620.c
+
+diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
+index 1976fb8..72e64fa 100644
+--- a/arch/mips/include/asm/mach-ralink/mt7620.h
++++ b/arch/mips/include/asm/mach-ralink/mt7620.h
+@@ -19,6 +19,7 @@ enum mt762x_soc_type {
+ MT762X_SOC_MT7620N,
+ MT762X_SOC_MT7628AN,
+ };
++extern enum mt762x_soc_type mt762x_soc;
+
+ #define MT7620_SYSC_BASE 0x10000000
+
+diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
+index 04e61c3..ccbdc90 100644
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -43,6 +43,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o
+ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
+ obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
+ obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
++obj-$(CONFIG_SOC_MT7620) += pci-mt7620.o
+ obj-$(CONFIG_SOC_MT7621) += pci-mt7621.o
+ obj-$(CONFIG_SOC_RT288X) += pci-rt2880.o
+ obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
+diff --git a/arch/mips/pci/pci-mt7620.c b/arch/mips/pci/pci-mt7620.c
+new file mode 100644
+index 0000000..780e4e9
+--- /dev/null
++++ b/arch/mips/pci/pci-mt7620.c
+@@ -0,0 +1,396 @@
++/*
++ * Ralink MT7620A SoC PCI support
++ *
++ * Copyright (C) 2007-2013 Bruce Chang
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/types.h>
++#include <linux/pci.h>
++#include <linux/io.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/of_irq.h>
++#include <linux/of_pci.h>
++#include <linux/reset.h>
++#include <linux/platform_device.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++#include <asm/mach-ralink/mt7620.h>
++
++#define RALINK_PCI_MM_MAP_BASE 0x20000000
++#define RALINK_PCI_IO_MAP_BASE 0x10160000
++
++#define RALINK_INT_PCIE0 4
++#define RALINK_SYSCFG1 0x14
++#define RALINK_CLKCFG1 0x30
++#define RALINK_GPIOMODE 0x60
++#define RALINK_PCIE_CLK_GEN 0x7c
++#define RALINK_PCIE_CLK_GEN1 0x80
++#define PCIEPHY0_CFG 0x90
++#define PPLL_CFG1 0x9c
++#define PPLL_DRV 0xa0
++#define PDRV_SW_SET (1<<31)
++#define LC_CKDRVPD_ (1<<19)
++
++#define RALINK_PCI_CONFIG_ADDR 0x20
++#define RALINK_PCI_CONFIG_DATA_VIRT_REG 0x24
++#define MEMORY_BASE 0x0
++#define RALINK_PCIE0_RST (1<<26)
++#define RALINK_PCI_BASE 0xB0140000
++#define RALINK_PCI_MEMBASE 0x28
++#define RALINK_PCI_IOBASE 0x2C
++
++#define RT6855_PCIE0_OFFSET 0x2000
++
++#define RALINK_PCI_PCICFG_ADDR 0x00
++#define RALINK_PCI0_BAR0SETUP_ADDR 0x10
++#define RALINK_PCI0_IMBASEBAR0_ADDR 0x18
++#define RALINK_PCI0_ID 0x30
++#define RALINK_PCI0_CLASS 0x34
++#define RALINK_PCI0_SUBID 0x38
++#define RALINK_PCI0_STATUS 0x50
++#define RALINK_PCI_PCIMSK_ADDR 0x0C
++
++#define RALINK_PCIEPHY_P0_CTL_OFFSET 0x7498
++#define RALINK_PCIE0_CLK_EN (1 << 26)
++
++#define BUSY 0x80000000
++#define WAITRETRY_MAX 10
++#define WRITE_MODE (1UL << 23)
++#define DATA_SHIFT 0
++#define ADDR_SHIFT 8
++
++static void __iomem *bridge_base;
++static void __iomem *pcie_base;
++
++static struct reset_control *rstpcie0;
++
++static inline void bridge_w32(u32 val, unsigned reg)
++{
++ iowrite32(val, bridge_base + reg);
++}
++
++static inline u32 bridge_r32(unsigned reg)
++{
++ return ioread32(bridge_base + reg);
++}
++
++static inline void pcie_w32(u32 val, unsigned reg)
++{
++ iowrite32(val, pcie_base + reg);
++}
++
++static inline u32 pcie_r32(unsigned reg)
++{
++ return ioread32(pcie_base + reg);
++}
++
++static inline void pcie_m32(u32 clr, u32 set, unsigned reg)
++{
++ u32 val = pcie_r32(reg);
++
++ val &= ~clr;
++ val |= set;
++ pcie_w32(val, reg);
++}
++
++static int wait_pciephy_busy(void)
++{
++ unsigned long reg_value = 0x0, retry = 0;
++
++ while (1) {
++ reg_value = pcie_r32(PCIEPHY0_CFG);
++
++ if (reg_value & BUSY)
++ mdelay(100);
++ else
++ break;
++ if (retry++ > WAITRETRY_MAX){
++ printk("PCIE-PHY retry failed.\n");
++ return -1;
++ }
++ }
++ return 0;
++}
++
++static void pcie_phy(unsigned long addr, unsigned long val)
++{
++ wait_pciephy_busy();
++ pcie_w32(WRITE_MODE | (val << DATA_SHIFT) | (addr << ADDR_SHIFT), PCIEPHY0_CFG);
++ mdelay(1);
++ wait_pciephy_busy();
++}
++
++static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val)
++{
++ unsigned int slot = PCI_SLOT(devfn);
++ u8 func = PCI_FUNC(devfn);
++ u32 address;
++ u32 data;
++ u32 num = 0;
++
++ if (bus)
++ num = bus->number;
++
++ address = (((where & 0xF00) >> 8) << 24) | (num << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
++ bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
++ data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRT_REG);
++
++ switch (size) {
++ case 1:
++ *val = (data >> ((where & 3) << 3)) & 0xff;
++ break;
++ case 2:
++ *val = (data >> ((where & 3) << 3)) & 0xffff;
++ break;
++ case 4:
++ *val = data;
++ break;
++ }
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
++{
++ unsigned int slot = PCI_SLOT(devfn);
++ u8 func = PCI_FUNC(devfn);
++ u32 address;
++ u32 data;
++ u32 num = 0;
++
++ if (bus)
++ num = bus->number;
++
++ address = (((where & 0xF00) >> 8) << 24) | (num << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000;
++ bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
++ data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRT_REG);
++
++ switch (size) {
++ case 1:
++ data = (data & ~(0xff << ((where & 3) << 3))) |
++ (val << ((where & 3) << 3));
++ break;
++ case 2:
++ data = (data & ~(0xffff << ((where & 3) << 3))) |
++ (val << ((where & 3) << 3));
++ break;
++ case 4:
++ data = val;
++ break;
++ }
++
++ bridge_w32(data, RALINK_PCI_CONFIG_DATA_VIRT_REG);
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++struct pci_ops mt7620_pci_ops= {
++ .read = pci_config_read,
++ .write = pci_config_write,
++};
++
++static struct resource mt7620_res_pci_mem1;
++static struct resource mt7620_res_pci_io1;
++struct pci_controller mt7620_controller = {
++ .pci_ops = &mt7620_pci_ops,
++ .mem_resource = &mt7620_res_pci_mem1,
++ .mem_offset = 0x00000000UL,
++ .io_resource = &mt7620_res_pci_io1,
++ .io_offset = 0x00000000UL,
++ .io_map_base = 0xa0000000,
++};
++
++static int mt7620_pci_hw_init(struct platform_device *pdev) {
++ /* PCIE: bypass PCIe DLL */
++ pcie_phy(0x0, 0x80);
++ pcie_phy(0x1, 0x04);
++
++ /* PCIE: Elastic buffer control */
++ pcie_phy(0x68, 0xB4);
++
++ pcie_m32(0, BIT(1), RALINK_PCI_PCICFG_ADDR);
++
++ reset_control_assert(rstpcie0);
++
++ rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
++ rt_sysc_m32(BIT(19), BIT(31), PPLL_DRV);
++
++ reset_control_deassert(rstpcie0);
++ rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
++
++ mdelay(100);
++
++ if (!(rt_sysc_r32(PPLL_CFG1) & BIT(23))) {
++ dev_err(&pdev->dev, "MT7620 PPLL unlock\n");
++ reset_control_assert(rstpcie0);
++ rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
++ return -1;
++ }
++ rt_sysc_m32(BIT(18) | BIT(17), BIT(19) | BIT(31), PPLL_DRV);
++
++ return 0;
++}
++
++static int mt7628_pci_hw_init(struct platform_device *pdev) {
++ u32 val = 0;
++
++ rt_sysc_m32(BIT(16), 0, RALINK_GPIOMODE);
++ reset_control_deassert(rstpcie0);
++ rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
++ mdelay(100);
++
++ pcie_m32(~0xff, 0x5, RALINK_PCIEPHY_P0_CTL_OFFSET);
++
++ pci_config_read(NULL, 0, 0x70c, 4, &val);
++ val &= ~(0xff) << 8;
++ val |= 0x50 << 8;
++ pci_config_write(NULL, 0, 0x70c, 4, val);
++
++ pci_config_read(NULL, 0, 0x70c, 4, &val);
++ dev_err(&pdev->dev, "Port 0 N_FTS = %x\n", (unsigned int) val);
++
++ return 0;
++}
++
++static int mt7620_pci_probe(struct platform_device *pdev)
++{
++ struct resource *bridge_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ struct resource *pcie_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++ u32 val = 0;
++
++ rstpcie0 = devm_reset_control_get(&pdev->dev, "pcie0");
++ if (IS_ERR(rstpcie0))
++ return PTR_ERR(rstpcie0);
++
++ bridge_base = devm_ioremap_resource(&pdev->dev, bridge_res);
++ if (!bridge_base)
++ return -ENOMEM;
++
++ pcie_base = devm_ioremap_resource(&pdev->dev, pcie_res);
++ if (!pcie_base)
++ return -ENOMEM;
++
++ iomem_resource.start = 0;
++ iomem_resource.end = ~0;
++ ioport_resource.start = 0;
++ ioport_resource.end = ~0;
++
++ /* bring up the pci core */
++ switch (ralink_soc) {
++ case MT762X_SOC_MT7620A:
++ if (mt7620_pci_hw_init(pdev))
++ return -1;
++ break;
++
++ case MT762X_SOC_MT7628AN:
++ if (mt7628_pci_hw_init(pdev))
++ return -1;
++ break;
++
++ default:
++ dev_err(&pdev->dev, "pcie is not supported on this hardware\n");
++ return -1;
++ }
++ mdelay(50);
++
++ /* enable write access */
++ pcie_m32(BIT(1), 0, RALINK_PCI_PCICFG_ADDR);
++ mdelay(100);
++
++ /* check if there is a card present */
++ if ((pcie_r32(RALINK_PCI0_STATUS) & 0x1) == 0) {
++ reset_control_assert(rstpcie0);
++ rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
++ if (ralink_soc == MT762X_SOC_MT7620A)
++ rt_sysc_m32(LC_CKDRVPD_, PDRV_SW_SET, PPLL_DRV);
++ dev_err(&pdev->dev, "PCIE0 no card, disable it(RST&CLK)\n");
++ return -1;
++ }
++
++ /* setup ranges */
++ bridge_w32(0xffffffff, RALINK_PCI_MEMBASE);
++ bridge_w32(RALINK_PCI_IO_MAP_BASE, RALINK_PCI_IOBASE);
++
++ pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR);
++ pcie_w32(MEMORY_BASE, RALINK_PCI0_IMBASEBAR0_ADDR);
++ pcie_w32(0x06040001, RALINK_PCI0_CLASS);
++
++ /* enable interrupts */
++ pcie_m32(0, BIT(20), RALINK_PCI_PCIMSK_ADDR);
++
++ /* voodoo from the SDK driver */
++ pci_config_read(NULL, 0, 4, 4, &val);
++ pci_config_write(NULL, 0, 4, 4, val | 0x7);
++
++ pci_load_of_ranges(&mt7620_controller, pdev->dev.of_node);
++ register_pci_controller(&mt7620_controller);
++
++ return 0;
++}
++
++int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++ u16 cmd;
++ u32 val;
++ int irq = 0;
++
++ if ((dev->bus->number == 0) && (slot == 0)) {
++ pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR); //open 7FFF:2G; ENABLE
++ pci_config_write(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, MEMORY_BASE);
++ pci_config_read(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, &val);
++ } else if ((dev->bus->number == 1) && (slot == 0x0)) {
++ irq = RALINK_INT_PCIE0;
++ } else {
++ dev_err(&dev->dev, "no irq found - bus=0x%x, slot = 0x%x\n", dev->bus->number, slot);
++ return 0;
++ }
++ dev_err(&dev->dev, "card - bus=0x%x, slot = 0x%x irq=%d\n", dev->bus->number, slot, irq);
++
++ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14); //configure cache line size 0x14
++ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xFF); //configure latency timer 0x10
++ pci_read_config_word(dev, PCI_COMMAND, &cmd);
++
++ // FIXME
++ cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
++ pci_write_config_word(dev, PCI_COMMAND, cmd);
++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
++ //pci_write_config_byte(dev, PCI_INTERRUPT_PIN, dev->irq);
++
++ return irq;
++}
++
++int pcibios_plat_dev_init(struct pci_dev *dev)
++{
++ return 0;
++}
++
++static const struct of_device_id mt7620_pci_ids[] = {
++ { .compatible = "mediatek,mt7620-pci" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, mt7620_pci_ids);
++
++static struct platform_driver mt7620_pci_driver = {
++ .probe = mt7620_pci_probe,
++ .driver = {
++ .name = "mt7620-pci",
++ .owner = THIS_MODULE,
++ .of_match_table = of_match_ptr(mt7620_pci_ids),
++ },
++};
++
++static int __init mt7620_pci_init(void)
++{
++ return platform_driver_register(&mt7620_pci_driver);
++}
++
++arch_initcall(mt7620_pci_init);
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index c2778f2..2aa5e42 100644
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -43,6 +43,7 @@ choice
+
+ config SOC_MT7620
+ bool "MT7620/8"
++ select HW_HAS_PCI
+
+ config SOC_MT7621
+ bool "MT7621"
+--
+1.7.10.4
+
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 23:31:00 +0000