1 files changed, 0 insertions, 282 deletions
diff --git a/target/linux/ramips/patches-3.8/0110-MIPS-add-rt3883-dts-files.patch b/target/linux/ramips/patches-3.8/0110-MIPS-add-rt3883-dts-files.patch
deleted file mode 100644
index a99a1ec6a1..0000000000
--- a/target/linux/ramips/patches-3.8/0110-MIPS-add-rt3883-dts-files.patch
+++ /dev/null
@@ -1,282 +0,0 @@
-From 9d13fedc08f4e2cd9640983c2af8b9e9c64c094b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 21 Mar 2013 18:37:00 +0100
-Subject: [PATCH 110/121] MIPS: add rt3883 dts files
-
-Add a dtsi file for RT3883 SoC. This SoC is almost the same as RT3050 but has
-OHCI/EHCI in favour of the Synopsis DWC2 core. There is also a 3x3 802.11n
-wifi core.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/Kconfig             |    4 +
- arch/mips/ralink/dts/Makefile        |    1 +
- arch/mips/ralink/dts/rt3883.dtsi     |  186 ++++++++++++++++++++++++++++++++++
- arch/mips/ralink/dts/rt3883_eval.dts |   52 ++++++++++
- 4 files changed, 243 insertions(+)
- create mode 100644 arch/mips/ralink/dts/rt3883.dtsi
- create mode 100644 arch/mips/ralink/dts/rt3883_eval.dts
-
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -39,6 +39,10 @@ choice
- 		bool "RT305x eval kit"
- 		depends on SOC_RT305X
- 
-+	config DTB_RT3883_EVAL
-+		bool "RT3883 eval kit"
-+		depends on SOC_RT3883
-+
- endchoice
- 
- endif
---- a/arch/mips/ralink/dts/Makefile
-+++ b/arch/mips/ralink/dts/Makefile
-@@ -1,2 +1,3 @@
- obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o
- obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
-+obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o
---- /dev/null
-+++ b/arch/mips/ralink/dts/rt3883.dtsi
-@@ -0,0 +1,186 @@
-+/ {
-+	#address-cells = <1>;
-+	#size-cells = <1>;
-+	compatible = "ralink,rt3883-soc";
-+
-+	cpus {
-+		cpu@0 {
-+			compatible = "mips,mips74Kc";
-+		};
-+	};
-+
-+	chosen {
-+		bootargs = "console=ttyS0,57600 init=/init";
-+	};
-+
-+	cpuintc: cpuintc@0 {
-+		#address-cells = <0>;
-+		#interrupt-cells = <1>;
-+		interrupt-controller;
-+		compatible = "mti,cpu-interrupt-controller";
-+	};
-+
-+	palmbus@10000000 {
-+		compatible = "palmbus";
-+		reg = <0x10000000 0x200000>;
-+		ranges = <0x0 0x10000000 0x1FFFFF>;
-+
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		sysc@0 {
-+			compatible = "ralink,rt3883-sysc", "ralink,rt3050-sysc";
-+			reg = <0x0 0x100>;
-+		};
-+
-+		timer@100 {
-+			compatible = "ralink,rt3883-timer", "ralink,rt2880-timer";
-+			reg = <0x100 0x20>;
-+
-+			interrupt-parent = <&intc>;
-+			interrupts = <1>;
-+
-+			status = "disabled";
-+		};
-+
-+		watchdog@120 {
-+			compatible = "ralink,rt3883-wdt", "ralink,rt2880-wdt";
-+			reg = <0x120 0x10>;
-+		};
-+
-+		intc: intc@200 {
-+			compatible = "ralink,rt3883-intc", "ralink,rt2880-intc";
-+			reg = <0x200 0x100>;
-+
-+			interrupt-controller;
-+			#interrupt-cells = <1>;
-+
-+			interrupt-parent = <&cpuintc>;
-+			interrupts = <2>;
-+		};
-+
-+		memc@300 {
-+			compatible = "ralink,rt3883-memc", "ralink,rt3050-memc";
-+			reg = <0x300 0x100>;
-+		};
-+
-+		gpio0: gpio@600 {
-+			compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
-+			reg = <0x600 0x34>;
-+
-+			gpio-controller;
-+			#gpio-cells = <2>;
-+
-+			ralink,num-gpios = <24>;
-+			ralink,register-map = [ 00 04 08 0c
-+						20 24 28 2c
-+						30 34 ];
-+
-+			status = "disabled";
-+		};
-+
-+		gpio1: gpio@638 {
-+			compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
-+			reg = <0x638 0x24>;
-+
-+			gpio-controller;
-+			#gpio-cells = <2>;
-+
-+			ralink,num-gpios = <16>;
-+			ralink,register-map = [ 00 04 08 0c
-+						10 14 18 1c
-+						20 24 ];
-+
-+			status = "disabled";
-+		};
-+
-+		gpio2: gpio@660 {
-+			compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
-+			reg = <0x660 0x24>;
-+
-+			gpio-controller;
-+			#gpio-cells = <2>;
-+
-+			ralink,num-gpios = <32>;
-+			ralink,register-map = [ 00 04 08 0c
-+						10 14 18 1c
-+						20 24 ];
-+
-+			status = "disabled";
-+		};
-+
-+		gpio3: gpio@688 {
-+			compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio";
-+			reg = <0x688 0x24>;
-+
-+			gpio-controller;
-+			#gpio-cells = <2>;
-+
-+			ralink,num-gpios = <24>;
-+			ralink,register-map = [ 00 04 08 0c
-+						10 14 18 1c
-+						20 24 ];
-+
-+			status = "disabled";
-+		};
-+
-+		spi@b00 {
-+			compatible = "ralink,rt3883-spi", "ralink,rt2880-spi";
-+			reg = <0xb00 0x100>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			status = "disabled";
-+		};
-+
-+		uartlite@c00 {
-+			compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
-+			reg = <0xc00 0x100>;
-+
-+			interrupt-parent = <&intc>;
-+			interrupts = <12>;
-+
-+			reg-shift = <2>;
-+		};
-+	};
-+
-+	ethernet@10100000 {
-+		compatible = "ralink,rt3883-eth";
-+		reg = <0x10100000 10000>;
-+
-+		interrupt-parent = <&cpuintc>;
-+		interrupts = <5>;
-+
-+		status = "disabled";
-+	};
-+
-+	wmac@10180000 {
-+		compatible = "ralink,rt3883-wmac", "ralink,rt2880-wmac";
-+		reg = <0x10180000 40000>;
-+
-+		interrupt-parent = <&cpuintc>;
-+		interrupts = <6>;
-+
-+		status = "disabled";
-+	};
-+
-+	ehci@101c0000 {
-+		compatible = "ralink,rt3883-ehci", "ehci-platform";
-+		reg = <0x101c0000 0x1000>;
-+
-+		interrupt-parent = <&intc>;
-+		interrupts = <18>;
-+
-+		status = "disabled";
-+	};
-+
-+	ohci@101c1000 {
-+		compatible = "ralink,rt3883-ohci", "ohci-platform";
-+		reg = <0x101c1000 0x1000>;
-+
-+		interrupt-parent = <&intc>;
-+		interrupts = <18>;
-+
-+		status = "disabled";
-+	};
-+};
---- /dev/null
-+++ b/arch/mips/ralink/dts/rt3883_eval.dts
-@@ -0,0 +1,52 @@
-+/dts-v1/;
-+
-+/include/ "rt3883.dtsi"
-+
-+/ {
-+	#address-cells = <1>;
-+	#size-cells = <1>;
-+	compatible = "ralink,rt3883-eval-board", "ralink,rt3883-soc";
-+	model = "Ralink RT3883 evaluation board";
-+
-+	memory@0 {
-+		reg = <0x0 0x4000000>;
-+	};
-+
-+	palmbus@10000000 {
-+		sysc@0 {
-+			ralink,pinmux = "uartlite", "spi";
-+			ralink,uartmux = "gpio";
-+			ralink,wdtmux = <0>;
-+		};
-+	};
-+
-+	cfi@1f000000 {
-+		compatible = "cfi-flash";
-+		reg = <0x1f000000 0x800000>;
-+
-+		bank-width = <2>;
-+		device-width = <2>;
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		partition@0 {
-+			label = "uboot";
-+			reg = <0x0 0x30000>;
-+			read-only;
-+		};
-+		partition@30000 {
-+			label = "uboot-env";
-+			reg = <0x30000 0x10000>;
-+			read-only;
-+		};
-+		partition@40000 {
-+			label = "calibration";
-+			reg = <0x40000 0x10000>;
-+			read-only;
-+		};
-+		partition@50000 {
-+			label = "linux";
-+			reg = <0x50000 0x7b0000>;
-+		};
-+	};
-+};