diff options
Diffstat (limited to 'target/linux/ramips/mt76x8/base-files/etc')
| -rwxr-xr-x | target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds | 138 | ||||
| -rwxr-xr-x | target/linux/ramips/mt76x8/base-files/etc/board.d/02_network | 191 |
2 files changed, 329 insertions, 0 deletions
diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds new file mode 100755 index 0000000000..f397da14a3 --- /dev/null +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds @@ -0,0 +1,138 @@ +#!/bin/sh + +. /lib/functions/leds.sh +. /lib/functions/uci-defaults.sh + +set_wifi_led() { + ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}" +} + + +board=$(board_name) +boardname="${board##*,}" + +board_config_update + +led_wlan="$(get_dt_led wlan)" +[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt" + +case $board in +alfa-network,awusfree1) + set_wifi_led "$boardname:blue:wlan" + ;; +cudy,wr1000) + ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10" + ucidef_set_led_switch "lan1" "lan1" "$boardname:blue:lan1" "switch0" "0x08" + ucidef_set_led_switch "lan2" "lan2" "$boardname:blue:lan2" "switch0" "0x04" + ;; +glinet,gl-mt300n-v2) + set_wifi_led "$boardname:red:wlan" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x1" + ;; +hilink,hlk-7628n|\ +skylab,skw92a) + set_wifi_led "$boardname:green:wlan" + ;; +hiwifi,hc5661a|\ +hiwifi,hc5761a) + ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x10" + ;; +mediatek,linkit-smart-7688) + ucidef_set_led_wlan "wifi" "wifi" "linkit-smart-7688:orange:wifi" "phy0tpt" + ;; +netgear,r6120) + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10" + ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "phy0tpt" + ;; +rakwireless,rak633) + set_wifi_led "$boardname:blue:wifi" + ;; +tama,w06) + ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0" + ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt" + ;; +tplink,archer-c20-v4) + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" + ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" "wlan0" + ;; +tplink,archer-c50-v3|\ +tplink,archer-c50-v4) + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" + ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan2g" "phy0tpt" + ucidef_set_led_wlan "wlan5g" "wlan5g" "$boardname:green:wlan5g" "phy1tpt" + ;; +tplink,tl-mr3020-v3) + set_wifi_led "$boardname:green:wlan" + ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0" + ;; +tplink,tl-mr3420-v5|\ +tplink,tl-wr842n-v5) + ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt" + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" + ;; +tplink,tl-wa801nd-v5) + ucidef_set_led_wlan "wlan" "wlan" "$boardname:green:wlan" "phy0tpt" + ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0" + ;; +tplink,tl-wr840n-v4) + ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt" + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" + ;; +tplink,tl-wr841n-v13) + ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt" + ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x2" + ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x4" + ucidef_set_led_switch "lan3" "lan3" "$boardname:green:lan3" "switch0" "0x8" + ucidef_set_led_switch "lan4" "lan4" "$boardname:green:lan4" "switch0" "0x10" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" + ;; +tplink,tl-wr841n-v14) + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" + ;; +tplink,tl-wr902ac-v3) + ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt" + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x10" + ;; +unielec,u7628-01-16m) + ucidef_set_led_switch "lan1" "lan1" "u7628-01:green:lan1" "switch0" "0x2" + ucidef_set_led_switch "lan2" "lan2" "u7628-01:green:lan2" "switch0" "0x4" + ucidef_set_led_switch "lan3" "lan3" "u7628-01:green:lan3" "switch0" "0x8" + ucidef_set_led_switch "lan4" "lan4" "u7628-01:green:lan4" "switch0" "0x10" + ucidef_set_led_switch "wan" "wan" "u7628-01:green:wan" "switch0" "0x01" + set_wifi_led "u7628-01:green:wlan" + ;; +wavlink,wl-wn570ha1) + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" + ucidef_set_rssimon "wlan0" "200000" "1" + ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan0" "1" "49" + ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan0" "50" "84" + ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan0" "85" "100" + set_wifi_led "$boardname:green:wifi" + ;; +wavlink,wl-wn575a3) + ucidef_set_rssimon "wlan1" "200000" "1" + ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan1" "1" "49" + ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan1" "50" "84" + ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan1" "85" "100" + ;; +zbtlink,zbt-we1226) + set_wifi_led "$boardname:green:wlan" + ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x01" + ucidef_set_led_switch "lan2" "LAN2" "$boardname:green:lan2" "switch0" "0x02" + ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x10" + ;; +zyxel,keenetic-extra-ii) + set_wifi_led "$boardname:green:wifi" + ucidef_set_led_switch "internet" "internet" "$boardname:green:internet" "switch0" "0x01" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network new file mode 100755 index 0000000000..3bb5d31423 --- /dev/null +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -0,0 +1,191 @@ +#!/bin/sh + +. /lib/functions.sh +. /lib/functions/uci-defaults.sh +. /lib/functions/system.sh + +ramips_setup_interfaces() +{ + local board="$1" + + case $board in + alfa-network,awusfree1|\ + d-team,pbr-d1|\ + tama,w06|\ + tplink,tl-mr3020-v3|\ + tplink,tl-wr802n-v4) + ucidef_set_interface_lan "eth0" + ;; + buffalo,wcr-1166ds) + ucidef_add_switch "switch0" \ + "3:lan" "4:wan" "6@eth0" + ;; + cudy,wr1000) + ucidef_add_switch "switch0" \ + "2:lan:2" "3:lan:1" "4:wan" "6@eth0" + ;; + duzun,dm06) + ucidef_add_switch "switch0" \ + "1:lan" "0:wan" "6@eth0" + ;; + glinet,gl-mt300n-v2) + ucidef_add_switch "switch0" \ + "1:lan" "0:wan" "6@eth0" + ;; + glinet,vixmini) + ucidef_add_switch "switch0" \ + "0:lan" "6@eth0" + ;; + hilink,hlk-7628n|\ + hiwifi,hc5861b|\ + skylab,skw92a|\ + tplink,archer-c20-v4|\ + tplink,archer-c50-v3|\ + tplink,archer-c50-v4|\ + tplink,tl-mr3420-v5|\ + tplink,tl-wr840n-v4|\ + tplink,tl-wr840n-v5|\ + tplink,tl-wr841n-v13|\ + tplink,tl-wr841n-v14|\ + tplink,tl-wr842n-v5|\ + unielec,u7628-01-16m|\ + wrtnode,wrtnode2p|\ + wrtnode,wrtnode2r|\ + zyxel,keenetic-extra-ii) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" + ;; + hiwifi,hc5661a|\ + hiwifi,hc5761a|\ + mediatek,mt7628an-eval-board|\ + mercury,mac1200r-v2|\ + totolink,lr1200|\ + wavlink,wl-wn570ha1|\ + wavlink,wl-wn575a3|\ + xiaomi,miwifi-nano) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" + ;; + iptime,a3) + ucidef_add_switch "switch0" \ + "2:lan:2" "3:lan:1" "0:wan" "6@eth0" + ;; + iptime,a604m) + ucidef_add_switch "switch0" \ + "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" + ;; + mediatek,linkit-smart-7688|\ + onion,omega2p|\ + onion,omega2|\ + tplink,tl-wa801nd-v5|\ + widora,neo-16m|\ + widora,neo-32m) + ucidef_add_switch "switch0" + ucidef_add_switch_attr "switch0" "enable" "false" + ucidef_set_interface_lan "eth0" + ;; + netgear,r6120) + ucidef_add_switch "switch0" \ + "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0" + ;; + rakwireless,rak633) + ucidef_add_switch "switch0" \ + "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0" + ;; + tplink,tl-wr902ac-v3) + ucidef_add_switch "switch0" \ + "4:lan" "6@eth0" + ;; + vocore,vocore2|\ + vocore,vocore2-lite) + ucidef_add_switch "switch0" \ + "0:lan" "2:lan" "6t@eth0" + ;; + wiznet,wizfi630s) + ucidef_add_switch "switch0" \ + "0:wan" "3:lan" "4:lan" "6@eth0" + ;; + xiaomi,mir4a-100m) + ucidef_add_switch "switch0" \ + "4:lan:1" "2:lan:2" "0:wan" "6@eth0" + ;; + zbtlink,zbt-we1226) + ucidef_add_switch "switch0" \ + "0:lan:2" "1:lan:1" "4:wan" "6@eth0" + ;; + *) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ;; + esac +} + +ramips_setup_macs() +{ + local board="$1" + local lan_mac="" + local wan_mac="" + local label_mac="" + + case $board in + buffalo,wcr-1166ds) + local index="$(find_mtd_index "board_data")" + wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)" + lan_mac=$wan_mac + ;; + cudy,wr1000) + wan_mac=$(mtd_get_mac_binary factory 0x2e) + label_mac=$(cat /sys/class/ieee80211/phy0/macaddress) + ;; + glinet,gl-mt300n-v2) + # This empty case has to be kept for devices without any MAC address adjustments + ;; + hilink,hlk-7628n) + lan_mac=$(macaddr_setbit_la "$(cat /sys/class/net/eth0/address)") + wan_mac=$(macaddr_add "$lan_mac" 1) + ;; + hiwifi,hc5661a|\ + hiwifi,hc5761a|\ + hiwifi,hc5861b) + lan_mac=$(mtd_get_mac_ascii bdinfo "Vfac_mac ") + label_mac=$lan_mac + [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address) + wan_mac=$(macaddr_add "$lan_mac" 1) + ;; + iptime,a3|\ + iptime,a604m) + wan_mac=$(mtd_get_mac_binary u-boot 0x1fc40) + ;; + mediatek,linkit-smart-7688|\ + onion,omega2|\ + onion,omega2p) + wan_mac=$(mtd_get_mac_binary factory 0x4) + lan_mac=$(mtd_get_mac_binary factory 0x2e) + ;; + mercury,mac1200r-v2) + wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory_info 0xd)" 1) + ;; + skylab,skw92a|\ + totolink,lr1200) + wan_mac=$(mtd_get_mac_binary factory 0x2e) + ;; + vocore,vocore2|\ + vocore,vocore2-lite) + label_mac=$(cat /sys/class/ieee80211/phy0/macaddress) + ;; + *) + wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1) + ;; + esac + + [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac + [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac + [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac +} + +board_config_update +board=$(board_name) +ramips_setup_interfaces $board +ramips_setup_macs $board +board_config_flush + +exit 0 |