diff options
Diffstat (limited to 'target/linux/ramips/mt7621/base-files/etc/board.d')
3 files changed, 351 insertions, 0 deletions
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds new file mode 100755 index 0000000000..4eab8f42fe --- /dev/null +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -0,0 +1,83 @@ +#!/bin/sh + +. /lib/functions/leds.sh +. /lib/functions/uci-defaults.sh + +set_wifi_led() { + ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}" +} + + +board=$(board_name) +boardname="${board##*,}" + +board_config_update + +led_wlan="$(get_dt_led wlan)" +[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt" + +case $board in +d-team,newifi-d2) + ucidef_set_led_switch "internet" "internet" "$boardname:amber:internet" "switch0" "0x10" + ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:blue:wlan2g" "wlan0" + ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:blue:wlan5g" "wlan1" + ;; +d-team,pbr-m1|\ +gehua,ghl-r-001) + ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2" + ;; +dlink,dir-860l-b1) + ucidef_set_led_netdev "wan" "wan" "$boardname:green:net" "eth0.2" + ;; +gnubee,gb-pc1|\ +gnubee,gb-pc2) + ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x01" + ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x10" + ;; +mikrotik,rbm11g) + ucidef_set_rssimon "wlan0" "200000" "1" + ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:green:rssi0" "wlan0" "1" "100" + ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:green:rssi1" "wlan0" "20" "100" + ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssi2" "wlan0" "40" "100" + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssi3" "wlan0" "60" "100" + ucidef_set_led_rssi "rssiveryhigh" "RSSIVERYHIGH" "$boardname:green:rssi4" "wlan0" "80" "100" + ;; +mtc,wr1201) + ucidef_set_led_switch "eth_link" "LAN link" "$boardname:green:eth_link" "switch0" "0x0f" + ;; +netgear,r6220|\ +netgear,r6260|\ +netgear,r6350|\ +netgear,r6850|\ +netgear,wndr3700-v5) + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10" + ;; +tplink,re350-v1|\ +tplink,re650-v1) + ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "$boardname:blue:wifi2G" "wlan0" + ucidef_set_led_netdev "wifi5g" "Wifi 5G" "$boardname:blue:wifi5G" "wlan1" + ucidef_set_led_netdev "eth_act" "LAN act" "$boardname:green:eth_act" "eth0" "tx rx" + ucidef_set_led_switch "eth_link" "LAN link" "$boardname:green:eth_link" "switch0" "0x01" + ;; +xiaomi,mir3g) + ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x02" "0x08" + ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x08" "0x08" + ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08" + ;; +xiaomi,mir3p) + ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x10" "0x08" + ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x02" "0x08" + ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08" + ucidef_set_led_switch "lan3-amber" "LAN3 (amber)" "$boardname:amber:lan3" "switch0" "0x08" "0x08" + ;; +xzwifi,creativebox-v1) + ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x10" + ;; +youhua,wr1200js) + ucidef_set_led_switch "internet" "INTERNET" "$boardname:green:wan" "switch0" "0x01" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network new file mode 100755 index 0000000000..11cf27e092 --- /dev/null +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -0,0 +1,238 @@ +#!/bin/sh + +. /lib/functions.sh +. /lib/functions/uci-defaults.sh +. /lib/functions/system.sh + +ramips_setup_interfaces() +{ + local board="$1" + + case $board in + adslr,g7|\ + afoundry,ew1200|\ + d-team,pbr-m1|\ + firefly,firewrt|\ + hiwifi,hc5962|\ + mediatek,ap-mt7621a-v60|\ + mediatek,mt7621-eval-board|\ + mqmaker,witi|\ + mtc,wr1201|\ + netis,wf-2881|\ + phicomm,k2p|\ + planex,vr500|\ + samknows,whitebox-v8|\ + storylink,sap-g3200u3|\ + telco-electronics,x1|\ + totolink,a7000r|\ + unielec,u7621-06-16m|\ + unielec,u7621-06-64m|\ + xiaoyu,xy-c5|\ + xzwifi,creativebox-v1|\ + youku,yk-l2|\ + zbtlink,zbt-we1326|\ + zbtlink,zbt-we3526|\ + zbtlink,zbt-wg2626|\ + zbtlink,zbt-wg3526-16m|\ + zbtlink,zbt-wg3526-32m) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" + ;; + asiarf,ap7621-001) + ucidef_add_switch "switch0" "0:lan" "4:wan" "6@eth0" + ;; + asiarf,ap7621-nv1) + ucidef_add_switch "switch0" "0:wan" "2:lan" "3:lan" "6@eth0" + ;; + asus,rt-ac57u|\ + mikrotik,rb750gr3|\ + mikrotik,rbm33g|\ + ubiquiti,edgerouterx|\ + ubiquiti,edgerouterx-sfp|\ + youhua,wr1200js) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" + ;; + asus,rt-ac65p|\ + asus,rt-ac85p|\ + dlink,dir-860l-b1|\ + elecom,wrc-1167ghbk2-s|\ + elecom,wrc-1900gst|\ + elecom,wrc-2533gst|\ + iodata,wn-ax1167gr|\ + iodata,wn-gx300gr|\ + iodata,wnpr2600g) + ucidef_add_switch "switch0" \ + "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" + ;; + buffalo,wsr-1166dhp|\ + buffalo,wsr-600dhp) + ucidef_add_switch "switch0" \ + "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4:wan:5" "6@eth0" + ;; + d-team,newifi-d2|\ + wevo,11acnas|\ + wevo,w2914ns-v2) + ucidef_add_switch "switch0" \ + "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0" + ;; + edimax,rg21s) + ucidef_add_switch "switch0" \ + "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" + ;; + gehua,ghl-r-001) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "4:wan" "6@eth0" + ;; + gnubee,gb-pc1|\ + gnubee,gb-pc2) + ucidef_add_switch "switch0" \ + "0:lan" "4:lan" "6@eth0" + ;; + lenovo,newifi-d1) + ucidef_add_switch "switch0" \ + "1:lan:2" "2:lan:1" "4:wan" "6@eth0" + ;; + linksys,re6500) + ucidef_add_switch "switch0" \ + "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "6@eth0" + ;; + mikrotik,rbm11g|\ + thunder,timecloud) + ucidef_add_switch "switch0" + ucidef_add_switch_attr "switch0" "enable" "false" + ucidef_set_interface_lan "eth0" + ;; + netgear,ex6150|\ + tplink,re350-v1|\ + tplink,re650-v1) + ucidef_add_switch "switch0" \ + "0:lan" "6@eth0" + ;; + netgear,r6220|\ + netgear,r6260|\ + netgear,r6350|\ + netgear,r6850|\ + netgear,wndr3700-v5) + ucidef_add_switch "switch0" \ + "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0" + ;; + xiaomi,mir3g) + ucidef_add_switch "switch0" \ + "2:lan:2" "3:lan:1" "1:wan" "6t@eth0" + ;; + xiaomi,mir3g-v2) + ucidef_add_switch "switch0" \ + "2:lan:2" "3:lan:1" "4:wan" "6@eth0" + ;; + xiaomi,mir3p) + ucidef_add_switch "switch0" \ + "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0" + ;; + *) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ;; + esac +} + +ramips_setup_macs() +{ + local board="$1" + local lan_mac="" + local wan_mac="" + local label_mac="" + + case $board in + asus,rt-ac57u|\ + d-team,newifi-d2|\ + d-team,pbr-m1|\ + elecom,wrc-1167ghbk2-s|\ + elecom,wrc-1900gst|\ + elecom,wrc-2533gst|\ + lenovo,newifi-d1|\ + phicomm,k2p|\ + planex,vr500|\ + samknows,whitebox-v8|\ + youhua,wr1200js|\ + youku,yk-l2|\ + zbtlink,zbt-we3526) + wan_mac=$(mtd_get_mac_binary factory 0xe006) + ;; + asus,rt-ac65p|\ + asus,rt-ac85p) + wan_mac=$(mtd_get_mac_ascii u-boot-env et1macaddr) + label_mac=$(cat /sys/class/ieee80211/phy0/macaddress) + ;; + buffalo,wsr-1166dhp) + local index="$(find_mtd_index "board_data")" + wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)" + lan_mac=$wan_mac + ;; + buffalo,wsr-600dhp) + # This empty case has to be kept for devices without any MAC address adjustments + ;; + dlink,dir-860l-b1) + lan_mac=$(mtd_get_mac_ascii factory lanmac) + wan_mac=$(mtd_get_mac_ascii factory wanmac) + label_mac=$(cat /sys/class/ieee80211/phy1/macaddress) + ;; + edimax,rg21s) + lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr) + wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr) + ;; + hiwifi,hc5962) + lan_mac=$(mtd_get_mac_ascii bdinfo "Vfac_mac ") + label_mac=$lan_mac + [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address) + wan_mac=$(macaddr_add "$lan_mac" 1) + ;; + iodata,wn-ax1167gr|\ + iodata,wn-gx300gr) + wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1) + ;; + iodata,wnpr2600g) + wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr) + label_mac=$wan_mac + ;; + netgear,r6260|\ + netgear,r6350|\ + netgear,r6850) + wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 2) + ;; + xiaomi,mir3g) + lan_mac=$(mtd_get_mac_binary factory 0xe006) + ;; + xiaomi,mir3g-v2) + wan_mac=$(mtd_get_mac_binary factory 0xe006) + label_mac=$wan_mac + ;; + xiaomi,mir3p) + lan_mac=$(mtd_get_mac_binary factory 0xe006) + label_mac=$lan_mac + ;; + zbtlink,zbt-we1326) + wan_mac=$(mtd_get_mac_binary factory 0xe006) + label_mac=$(cat /sys/class/ieee80211/phy0/macaddress) + ;; + zbtlink,zbt-wg3526-16m|\ + zbtlink,zbt-wg3526-32m) + wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1) + label_mac=$(cat /sys/class/ieee80211/phy0/macaddress) + ;; + *) + wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1) + ;; + esac + + [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac + [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac + [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac +} + +board_config_update +board=$(board_name) +ramips_setup_interfaces $board +ramips_setup_macs $board +board_config_flush + +exit 0 diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches b/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches new file mode 100755 index 0000000000..d3bc85f827 --- /dev/null +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches @@ -0,0 +1,30 @@ +#!/bin/sh + +. /lib/functions/uci-defaults.sh + +board_config_update + +board=$(board_name) + +case "$board" in +mikrotik,rb750gr3) + ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "17" + ;; +telco-electronics,x1) + ucidef_add_gpio_switch "modem_reset" "Modem Reset" "16" + ;; +ubiquiti,edgerouterx) + ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "0" + ;; +ubiquiti,edgerouterx-sfp) + ucidef_add_gpio_switch "poe_power_port0" "PoE Power Port0" "496" + ucidef_add_gpio_switch "poe_power_port1" "PoE Power Port1" "497" + ucidef_add_gpio_switch "poe_power_port2" "PoE Power Port2" "498" + ucidef_add_gpio_switch "poe_power_port3" "PoE Power Port3" "499" + ucidef_add_gpio_switch "poe_power_port4" "PoE Power Port4" "500" + ;; +esac + +board_config_flush + +exit 0 |