diff options
Diffstat (limited to 'target/linux/ramips/files/arch')
117 files changed, 0 insertions, 11122 deletions
diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/common.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/common.h deleted file mode 100644 index bb6e12bf86..0000000000 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/common.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef __ASM_MACH_RALINK_COMMON_H -#define __ASM_MACH_RALINK_COMMON_H - -#define RAMIPS_SYS_TYPE_LEN 64 -extern unsigned char ramips_sys_type[RAMIPS_SYS_TYPE_LEN]; -extern unsigned long ramips_mem_base; -extern unsigned long ramips_mem_size_min; -extern unsigned long ramips_mem_size_max; -extern unsigned long (*ramips_get_mem_size)(void); - -void ramips_intc_irq_init(unsigned intc_base, unsigned irq, unsigned irq_base); -u32 ramips_intc_get_status(void); - -void ramips_soc_prom_init(void); -void ramips_soc_setup(void); -void ramips_early_serial_setup(int line, unsigned base, unsigned freq, - unsigned irq); - -#endif /* __ASM_MACH_RALINK_COMMON_H */ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/dev-gpio-buttons.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/dev-gpio-buttons.h deleted file mode 100644 index 8eb5e16906..0000000000 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/dev-gpio-buttons.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Ralink SoC GPIO button support - * - * Copyright (C) 2010-2011 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef __ASM_MACH_RALINK_DEV_GPIO_BUTTONS_H -#define __ASM_MACH_RALINK_DEV_GPIO_BUTTONS_H - -#include <linux/input.h> -#include <linux/gpio_keys.h> - -#ifdef CONFIG_RALINK_DEV_GPIO_BUTTONS -void -ramips_register_gpio_buttons(int id, unsigned poll_interval, unsigned nbuttons, - struct gpio_keys_button *buttons); -#else -static inline void -ramips_register_gpio_buttons(int id, unsigned poll_interval, unsigned nbuttons, - struct gpio_keys_button *buttons) -{ -} -#endif - -#endif /* __ASM_MACH_RALINK_DEV_GPIO_BUTTONS_H */ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/dev-gpio-leds.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/dev-gpio-leds.h deleted file mode 100644 index 24233abde6..0000000000 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/dev-gpio-leds.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Ralink SoC GPIO LED device support - * - * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef __ASM_MACH_RALINK_DEV_GPIO_LEDS_H -#define __ASM_MACH_RALINK_DEV_GPIO_LEDS_H - -#include <linux/leds.h> - -#ifdef CONFIG_RALINK_DEV_GPIO_LEDS -void ramips_register_gpio_leds(int id, unsigned num_leds, - struct gpio_led *leds); -#else -static inline void ramips_register_gpio_leds(int id, unsigned num_leds, - struct gpio_led *leds) -{ -} -#endif - -#endif /* __ASM_MACH_RALINK_DEV_GPIO_LEDS_H */ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/gpio.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/gpio.h deleted file mode 100644 index f68ee16856..0000000000 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/gpio.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Ralink SoC GPIO API support - * - * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef __ASM_MACH_RALINK_GPIO_H -#define __ASM_MACH_RALINK_GPIO_H - -#define ARCH_NR_GPIOS 128 -#include <asm-generic/gpio.h> - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -#endif /* __ASM_MACH_RALINK_GPIO_H */ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h deleted file mode 100644 index 200f737f71..0000000000 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Ralink machine types - * - * Copyright (C) 2010 Joonas Lahtinen <joonas.lahtinen@gmail.com> - * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <asm/mips_machine.h> - -enum ramips_mach_type { - RAMIPS_MACH_GENERIC, - /* RT2880 based machines */ - RAMIPS_MACH_F5D8235_V1, /* Belkin F5D8235 v1 */ - RAMIPS_MACH_BR6524N, /* Edimax BR6524N */ - RAMIPS_MACH_RT_N15, /* Asus RT-N15 */ - RAMIPS_MACH_V11ST_FE, /* Ralink V11ST-FE */ - RAMIPS_MACH_WLI_TX4_AG300N, /* Buffalo WLI-TX4-AG300N */ - RAMIPS_MACH_WZR_AGL300NH, /* Buffalo WZR-AGL300NH */ - - /* RT3050 based machines */ - RAMIPS_MACH_3G_6200N, /* Edimax 3G-6200N */ - RAMIPS_MACH_ALL0256N, /* Allnet ALL0256N */ - RAMIPS_MACH_CARAMBOLA, /* 8devices Carambola */ - RAMIPS_MACH_DIR_300_B1, /* D-Link DIR-300 B1 */ - RAMIPS_MACH_DIR_600_B1, /* D-Link DIR-600 B1 */ - RAMIPS_MACH_DIR_600_B2, /* D-Link DIR-600 B2 */ - RAMIPS_MACH_DIR_615_D, /* D-Link DIR-615 D */ - RAMIPS_MACH_DIR_620_A1, /* D-Link DIR-620 A1 */ - RAMIPS_MACH_RT_G32_B1, /* Asus RT-G32 B1 */ - RAMIPS_MACH_RT_N10_PLUS, /* Asus RT-N10+ */ - RAMIPS_MACH_NW718, /* Netcore NW718 */ - RAMIPS_MACH_WL_330N, /* Asus WL-330N */ - RAMIPS_MACH_WL_330N3G, /* Asus WL-330N3G */ - - /* RT3052 based machines */ - RAMIPS_MACH_3G300M, /* Tenda 3G300M */ - RAMIPS_MACH_ALL0239_3G, /* ALL0239-3G */ - RAMIPS_MACH_ARGUS_ATP52B, /* Argus ATP-52B */ - RAMIPS_MACH_BC2, /* NexAira BC2 */ - RAMIPS_MACH_BR6425, /* Edimax BR-6425 */ - RAMIPS_MACH_BROADWAY, /* Hauppauge Broadway */ - RAMIPS_MACH_DAP_1350, /* D-Link DAP-1350 */ - RAMIPS_MACH_ESR_9753, /* Senao / EnGenius ESR-9753*/ - RAMIPS_MACH_F5D8235_V2, /* Belkin F5D8235 v2 */ - RAMIPS_MACH_FONERA20N, /* La Fonera 2.0N */ - RAMIPS_MACH_RT_N13U, /* ASUS RT-N13U */ - RAMIPS_MACH_FREESTATION5, /* ARC Freestation5 */ - RAMIPS_MACH_HW550_3G, /* Aztech HW550-3G */ - RAMIPS_MACH_MOFI3500_3GN, /* MoFi Network MOFI3500-3GN */ - RAMIPS_MACH_NBG_419N, /* ZyXEL NBG-419N */ - RAMIPS_MACH_OMNI_EMB, /* Omnima MiniEMBWiFi */ - RAMIPS_MACH_PSR_680W, /* Petatel PSR-680W Wireless 3G Router*/ - RAMIPS_MACH_PWH2004, /* Prolink 2004H / Abocom 5205 */ - RAMIPS_MACH_SL_R7205, /* Skylink SL-R7205 Wireless 3G Router*/ - RAMIPS_MACH_V22RW_2X2, /* Ralink AP-RT3052-V22RW-2X2 */ - RAMIPS_MACH_W306R_V20, /* Tenda W306R_V20 */ - RAMIPS_MACH_W502U, /* ALFA Networks W502U */ - RAMIPS_MACH_WCR150GN, /* Sparklan WCR-150GN */ - RAMIPS_MACH_WHR_G300N, /* Buffalo WHR-G300N */ - RAMIPS_MACH_WL341V3, /* Sitecom WL-341 v3 */ - RAMIPS_MACH_WL351, /* Sitecom WL-351 v1 002 */ - RAMIPS_MACH_WR512_3GN, /* SH-WR512NU/WS-WR512N1-like 3GN*/ - RAMIPS_MACH_WR6202, /* Accton WR6202 */ - RAMIPS_MACH_MZKW300NH2, /* Planex MZK-W300NH2 Router */ - RAMIPS_MACH_XDXRN502J, /* unknown XDX-RN502J */ - RAMIPS_MACH_UR_326N4G, /* UPVEL ROUTER */ - RAMIPS_MACH_UR_336UN, /* UPVEL ROUTER */ - - /* RT3352 based machines */ - RAMIPS_MACH_ALL5002, /* Allnet ALL5002 */ - RAMIPS_MACH_DIR_615_H1, - - /* RT3662 based machines */ - RAMIPS_MACH_DIR_645, /* D-Link DIR-645 */ - RAMIPS_MACH_OMNI_EMB_HPM, /* Omnima EMB HPM */ - RAMIPS_MACH_RT_N56U, /* Asus RT-N56U */ - - /* RT3883 based machines */ - RAMIPS_MACH_TEW_691GR, /* TRENDnet TEW-691GR */ - RAMIPS_MACH_TEW_692GR, /* TRENDnet TEW-692GR */ - - /* RT5350 based machines */ - RAMIPS_MACH_AIR3GII, /* AirLive Air3GII */ -}; diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/ramips_eth_platform.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/ramips_eth_platform.h deleted file mode 100644 index 57c0556b93..0000000000 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/ramips_eth_platform.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - * based on Ralink SDK3.3 - * Copyright (C) 2009 John Crispin <blogic@openwrt.org> - */ - -#ifndef _RAMIPS_ETH_PLATFORM_H -#define _RAMIPS_ETH_PLATFORM_H - -#include <linux/phy.h> - -struct ramips_eth_platform_data -{ - unsigned char mac[6]; - void (*reset_fe)(void); - int min_pkt_len; - unsigned long sys_freq; - - int speed; - int duplex; - int tx_fc; - int rx_fc; - - u32 phy_mask; - phy_interface_t phy_if_mode; -}; - -#endif /* _RAMIPS_ETH_PLATFORM_H */ - diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/ramips_gpio.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/ramips_gpio.h deleted file mode 100644 index 32fc7a7402..0000000000 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/ramips_gpio.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Ralink SoC specific GPIO support - * - * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _RAMIPS_GPIO_H -#define _RAMIPS_GPIO_H - -#include <linux/gpio.h> -#include <linux/spinlock.h> - -enum ramips_gpio_reg { - RAMIPS_GPIO_REG_INT = 0, /* Interrupt status */ - RAMIPS_GPIO_REG_EDGE, - RAMIPS_GPIO_REG_RENA, - RAMIPS_GPIO_REG_FENA, - RAMIPS_GPIO_REG_DATA, - RAMIPS_GPIO_REG_DIR, /* Direction, 0:in, 1: out */ - RAMIPS_GPIO_REG_POL, /* Polarity, 0: normal, 1: invert */ - RAMIPS_GPIO_REG_SET, - RAMIPS_GPIO_REG_RESET, - RAMIPS_GPIO_REG_TOGGLE, - RAMIPS_GPIO_REG_MAX -}; - -struct ramips_gpio_chip { - struct gpio_chip chip; - unsigned long map_base; - unsigned long map_size; - u8 regs[RAMIPS_GPIO_REG_MAX]; - - spinlock_t lock; - void __iomem *regs_base; -}; - -struct ramips_gpio_data { - unsigned int num_chips; - struct ramips_gpio_chip *chips; -}; - -int ramips_gpio_init(struct ramips_gpio_data *data); - -#endif /* _RAMIPS_GPIO_H */ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/ramips_nand_platform.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/ramips_nand_platform.h deleted file mode 100644 index 54203db8ea..0000000000 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/ramips_nand_platform.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Platform data definition for the built-in NAND controller of the - * Ralink RT305X/RT3662/RT3883 SoCs - * - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _RAMIPS_NAND_PLATFORM_H -#define _RAMIPS_NAND_PLATFORM_H - -#define RAMIPS_NAND_DRIVER_NAME "ramips-nand" - -struct ramips_nand_platform_data { - const char *name; - struct mtd_partition *parts; - int nr_parts; -}; - -#endif /* _RAMIPS_NAND_PLATFORM_H */ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x.h deleted file mode 100644 index 10d7263324..0000000000 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x.h +++ /dev/null @@ -1,76 +0,0 @@ -/* - * Ralink RT288x SoC specific definitions - * - * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * Parts of this file are based on Ralink's 2.6.21 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _RT288X_H_ -#define _RT288X_H_ - -#include <linux/init.h> -#include <linux/io.h> - -#define RT288X_MEM_SIZE_MIN (2 * 1024 * 1024) -#define RT288X_MEM_SIZE_MAX (128 * 1024 * 1024) - -#define RT288X_CPU_IRQ_BASE 0 -#define RT288X_INTC_IRQ_BASE 8 -#define RT288X_INTC_IRQ_COUNT 32 -#define RT288X_GPIO_IRQ_BASE 40 - -#define RT288X_CPU_IRQ_INTC (RT288X_CPU_IRQ_BASE + 2) -#define RT288X_CPU_IRQ_PCI (RT288X_CPU_IRQ_BASE + 4) -#define RT288X_CPU_IRQ_FE (RT288X_CPU_IRQ_BASE + 5) -#define RT288X_CPU_IRQ_WNIC (RT288X_CPU_IRQ_BASE + 6) -#define RT288X_CPU_IRQ_COUNTER (RT288X_CPU_IRQ_BASE + 7) - -#define RT2880_INTC_IRQ_TIMER0 (RT288X_INTC_IRQ_BASE + 0) -#define RT2880_INTC_IRQ_TIMER1 (RT288X_INTC_IRQ_BASE + 1) -#define RT2880_INTC_IRQ_UART0 (RT288X_INTC_IRQ_BASE + 2) -#define RT2880_INTC_IRQ_PIO (RT288X_INTC_IRQ_BASE + 3) -#define RT2880_INTC_IRQ_PCM (RT288X_INTC_IRQ_BASE + 4) -#define RT2880_INTC_IRQ_UART1 (RT288X_INTC_IRQ_BASE + 8) -#define RT2880_INTC_IRQ_IA (RT288X_INTC_IRQ_BASE + 23) - -#define RT288X_GPIO_IRQ(x) (RT288X_GPIO_IRQ_BASE + (x)) -#define RT288X_GPIO_COUNT 32 - -extern void __iomem *rt288x_sysc_base; -extern void __iomem *rt288x_memc_base; - -static inline void rt288x_sysc_wr(u32 val, unsigned reg) -{ - __raw_writel(val, rt288x_sysc_base + reg); -} - -static inline u32 rt288x_sysc_rr(unsigned reg) -{ - return __raw_readl(rt288x_sysc_base + reg); -} - -static inline void rt288x_memc_wr(u32 val, unsigned reg) -{ - __raw_writel(val, rt288x_memc_base + reg); -} - -static inline u32 rt288x_memc_rr(unsigned reg) -{ - return __raw_readl(rt288x_memc_base + reg); -} - -void rt288x_gpio_init(u32 mode); - -#ifdef CONFIG_PCI -int rt288x_register_pci(void); -#else -static inline int rt288x_register_pci(void) { return 0; } -#endif /* CONFIG_PCI */ - -#endif /* _RT228X_H_ */ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h deleted file mode 100644 index 5e27363324..0000000000 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Ralink RT288x specific CPU feature overrides - * - * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This file was derived from: include/asm-mips/cpu-features.h - * Copyright (C) 2003, 2004 Ralf Baechle - * Copyright (C) 2004 Maciej W. Rozycki - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ -#ifndef __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H - -#define cpu_has_tlb 1 -#define cpu_has_4kex 1 -#define cpu_has_3k_cache 0 -#define cpu_has_4k_cache 1 -#define cpu_has_tx39_cache 0 -#define cpu_has_sb1_cache 0 -#define cpu_has_fpu 0 -#define cpu_has_32fpr 0 -#define cpu_has_counter 1 -#define cpu_has_watch 1 -#define cpu_has_divec 1 - -#define cpu_has_prefetch 1 -#define cpu_has_ejtag 1 -#define cpu_has_llsc 1 - -#define cpu_has_mips16 1 -#define cpu_has_mdmx 0 -#define cpu_has_mips3d 0 -#define cpu_has_smartmips 0 - -#define cpu_has_mips32r1 1 -#define cpu_has_mips32r2 1 -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 - -#define cpu_has_dsp 0 -#define cpu_has_mipsmt 0 - -#define cpu_has_64bits 0 -#define cpu_has_64bit_zero_reg 0 -#define cpu_has_64bit_gp_regs 0 -#define cpu_has_64bit_addresses 0 - -#define cpu_dcache_line_size() 16 -#define cpu_icache_line_size() 16 - -#endif /* __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x/irq.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x/irq.h deleted file mode 100644 index 61264f3c6a..0000000000 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x/irq.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ -#ifndef __ASM_MACH_RALINK_RT288X_IRQ_H -#define __ASM_MACH_RALINK_RT288X_IRQ_H - -#define MIPS_CPU_IRQ_BASE 0 -#define NR_IRQS 48 - -#include_next <irq.h> - -#endif /* __ASM_MACH_RALINK_RT288X_IRQ_H */ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x_regs.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x_regs.h deleted file mode 100644 index b5f4812b5c..0000000000 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x_regs.h +++ /dev/null @@ -1,127 +0,0 @@ -/* - * Ralink RT288x SoC register definitions - * - * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _RT288X_REGS_H_ -#define _RT288X_REGS_H_ - -#include <linux/bitops.h> - -#define RT2880_SYSC_BASE 0x00300000 -#define RT2880_TIMER_BASE 0x00300100 -#define RT2880_INTC_BASE 0x00300200 -#define RT2880_MEMC_BASE 0x00300300 -#define RT2880_UART0_BASE 0x00300500 -#define RT2880_PIO_BASE 0x00300600 -#define RT2880_I2C_BASE 0x00300900 -#define RT2880_SPI_BASE 0x00300b00 -#define RT2880_UART1_BASE 0x00300c00 -#define RT2880_FE_BASE 0x00400000 -#define RT2880_ROM_BASE 0x00410000 -#define RT2880_PCM_BASE 0x00420000 -#define RT2880_PCI_BASE 0x00440000 -#define RT2880_WMAC_BASE 0x00480000 -#define RT2880_FLASH1_BASE 0x01000000 -#define RT2880_FLASH0_BASE 0x1dc00000 -#define RT2880_SDRAM_BASE 0x08000000 - -#define RT2880_SYSC_SIZE 0x100 -#define RT2880_TIMER_SIZE 0x100 -#define RT2880_INTC_SIZE 0x100 -#define RT2880_MEMC_SIZE 0x100 -#define RT2880_UART0_SIZE 0x100 -#define RT2880_PIO_SIZE 0x100 -#define RT2880_UART1_SIZE 0x100 -#define RT2880_FLASH1_SIZE (16 * 1024 * 1024) -#define RT2880_FLASH0_SIZE (32 * 1024 * 1024) - -/* SYSC registers */ -#define SYSC_REG_CHIP_NAME0 0x000 /* Chip Name 0 */ -#define SYSC_REG_CHIP_NAME1 0x004 /* Chip Name 1 */ -#define SYSC_REG_CHIP_ID 0x00c /* Chip Identification */ -#define SYSC_REG_SYSTEM_CONFIG 0x010 /* System Configuration */ -#define SYSC_REG_CLKCFG 0x030 -#define SYSC_REG_RESET_CTRL 0x034 /* Reset Control*/ -#define SYSC_REG_RESET_STATUS 0x038 /* Reset Status*/ -#define SYSC_REG_GPIO_MODE 0x060 /* GPIO Purpose Select */ -#define SYSC_REG_IA_ADDRESS 0x310 /* Illegal Access Address */ -#define SYSC_REG_IA_TYPE 0x314 /* Illegal Access Type */ - -#define CHIP_ID_ID_MASK 0xff -#define CHIP_ID_ID_SHIFT 8 -#define CHIP_ID_REV_MASK 0xff - -#define SYSTEM_CONFIG_CPUCLK_SHIFT 20 -#define SYSTEM_CONFIG_CPUCLK_MASK 0x3 -#define SYSTEM_CONFIG_CPUCLK_250 0x0 -#define SYSTEM_CONFIG_CPUCLK_266 0x1 -#define SYSTEM_CONFIG_CPUCLK_280 0x2 -#define SYSTEM_CONFIG_CPUCLK_300 0x3 - -#define CLKCFG_SRAM_CS_N_WDT BIT(9) - -#define RT2880_RESET_SYSTEM BIT(0) -#define RT2880_RESET_TIMER BIT(1) -#define RT2880_RESET_INTC BIT(2) -#define RT2880_RESET_MEMC BIT(3) -#define RT2880_RESET_CPU BIT(4) -#define RT2880_RESET_UART0 BIT(5) -#define RT2880_RESET_PIO BIT(6) -#define RT2880_RESET_I2C BIT(9) -#define RT2880_RESET_SPI BIT(11) -#define RT2880_RESET_UART1 BIT(12) -#define RT2880_RESET_PCI BIT(16) -#define RT2880_RESET_WMAC BIT(17) -#define RT2880_RESET_FE BIT(18) -#define RT2880_RESET_PCM BIT(19) - -#define RT2880_GPIO_MODE_I2C BIT(0) -#define RT2880_GPIO_MODE_UART0 BIT(1) -#define RT2880_GPIO_MODE_SPI BIT(2) -#define RT2880_GPIO_MODE_UART1 BIT(3) -#define RT2880_GPIO_MODE_JTAG BIT(4) -#define RT2880_GPIO_MODE_MDIO BIT(5) -#define RT2880_GPIO_MODE_SDRAM BIT(6) -#define RT2880_GPIO_MODE_PCI BIT(7) - -#define RT2880_INTC_INT_TIMER0 BIT(0) -#define RT2880_INTC_INT_TIMER1 BIT(1) -#define RT2880_INTC_INT_UART0 BIT(2) -#define RT2880_INTC_INT_PIO BIT(3) -#define RT2880_INTC_INT_PCM BIT(4) -#define RT2880_INTC_INT_UART1 BIT(8) -#define RT2880_INTC_INT_IA BIT(23) -#define RT2880_INTC_INT_GLOBAL BIT(31) - -/* MEMC registers */ -#define MEMC_REG_SDRAM_CFG0 0x00 -#define MEMC_REG_SDRAM_CFG1 0x04 -#define MEMC_REG_FLASH_CFG0 0x08 -#define MEMC_REG_FLASH_CFG1 0x0c -#define MEMC_REG_IA_ADDR 0x10 -#define MEMC_REG_IA_TYPE 0x14 - -#define FLASH_CFG_WIDTH_SHIFT 26 -#define FLASH_CFG_WIDTH_MASK 0x3 -#define FLASH_CFG_WIDTH_8BIT 0x0 -#define FLASH_CFG_WIDTH_16BIT 0x1 -#define FLASH_CFG_WIDTH_32BIT 0x2 - -/* UART registers */ -#define UART_REG_RX 0 -#define UART_REG_TX 1 -#define UART_REG_IER 2 -#define UART_REG_IIR 3 -#define UART_REG_FCR 4 -#define UART_REG_LCR 5 -#define UART_REG_MCR 6 -#define UART_REG_LSR 7 - -#endif /* _RT288X_REGS_H_ */ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x.h deleted file mode 100644 index c59135c1ab..0000000000 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x.h +++ /dev/null @@ -1,169 +0,0 @@ -/* - * Ralink RT305x SoC specific definitions - * - * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> - * - * Parts of this file are based on Ralink's 2.6.21 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _RT305X_H_ -#define _RT305X_H_ - -#include <linux/init.h> -#include <linux/io.h> - -enum rt305x_soc_type { - RT305X_SOC_UNKNOWN = 0, - RT305X_SOC_RT3050, - RT305X_SOC_RT3052, - RT305X_SOC_RT3350, - RT305X_SOC_RT3352, - RT305X_SOC_RT5350, -}; - -extern enum rt305x_soc_type rt305x_soc; - -static inline int soc_is_rt3050(void) -{ - return rt305x_soc == RT305X_SOC_RT3050; -} - -static inline int soc_is_rt3052(void) -{ - return rt305x_soc == RT305X_SOC_RT3052; -} - -static inline int soc_is_rt305x(void) -{ - return soc_is_rt3050() || soc_is_rt3052(); -} - -static inline int soc_is_rt3350(void) -{ - return rt305x_soc == RT305X_SOC_RT3350; -} - -static inline int soc_is_rt3352(void) -{ - return rt305x_soc == RT305X_SOC_RT3352; -} - -static inline int soc_is_rt5350(void) -{ - return rt305x_soc == RT305X_SOC_RT5350; -} - -#define RT305X_MEM_SIZE_MIN (2 * 1024 * 1024) -#define RT305X_MEM_SIZE_MAX (64 * 1024 * 1024) - -#define RT3352_MEM_SIZE_MIN (2 * 1024 * 1024) -#define RT3352_MEM_SIZE_MAX (256 * 1024 * 1024) - -#define RT305X_CPU_IRQ_BASE 0 -#define RT305X_INTC_IRQ_BASE 8 -#define RT305X_INTC_IRQ_COUNT 32 -#define RT305X_GPIO_IRQ_BASE 40 - -#define RT305X_CPU_IRQ_INTC (RT305X_CPU_IRQ_BASE + 2) -#define RT305X_CPU_IRQ_FE (RT305X_CPU_IRQ_BASE + 5) -#define RT305X_CPU_IRQ_WNIC (RT305X_CPU_IRQ_BASE + 6) -#define RT305X_CPU_IRQ_COUNTER (RT305X_CPU_IRQ_BASE + 7) - -#define RT305X_INTC_IRQ_SYSCTL (RT305X_INTC_IRQ_BASE + 0) -#define RT305X_INTC_IRQ_TIMER0 (RT305X_INTC_IRQ_BASE + 1) -#define RT305X_INTC_IRQ_TIMER1 (RT305X_INTC_IRQ_BASE + 2) -#define RT305X_INTC_IRQ_IA (RT305X_INTC_IRQ_BASE + 3) -#define RT305X_INTC_IRQ_PCM (RT305X_INTC_IRQ_BASE + 4) -#define RT305X_INTC_IRQ_UART0 (RT305X_INTC_IRQ_BASE + 5) -#define RT305X_INTC_IRQ_PIO (RT305X_INTC_IRQ_BASE + 6) -#define RT305X_INTC_IRQ_DMA (RT305X_INTC_IRQ_BASE + 7) -#define RT305X_INTC_IRQ_NAND (RT305X_INTC_IRQ_BASE + 8) -#define RT305X_INTC_IRQ_PERFC (RT305X_INTC_IRQ_BASE + 9) -#define RT305X_INTC_IRQ_I2S (RT305X_INTC_IRQ_BASE + 10) -#define RT305X_INTC_IRQ_UART1 (RT305X_INTC_IRQ_BASE + 12) -#define RT305X_INTC_IRQ_ESW (RT305X_INTC_IRQ_BASE + 17) -#define RT305X_INTC_IRQ_OTG (RT305X_INTC_IRQ_BASE + 18) - -extern void __iomem *rt305x_sysc_base; -extern void __iomem *rt305x_memc_base; - -static inline void rt305x_sysc_wr(u32 val, unsigned reg) -{ - __raw_writel(val, rt305x_sysc_base + reg); -} - -static inline u32 rt305x_sysc_rr(unsigned reg) -{ - return __raw_readl(rt305x_sysc_base + reg); -} - -static inline void rt305x_memc_wr(u32 val, unsigned reg) -{ - __raw_writel(val, rt305x_memc_base + reg); -} - -static inline u32 rt305x_memc_rr(unsigned reg) -{ - return __raw_readl(rt305x_memc_base + reg); -} - -#define RT305X_GPIO_I2C_SD 1 -#define RT305X_GPIO_I2C_SCLK 2 -#define RT305X_GPIO_SPI_EN 3 -#define RT305X_GPIO_SPI_CLK 4 -#define RT305X_GPIO_SPI_DOUT 5 -#define RT305X_GPIO_SPI_DIN 6 -/* GPIO 7-14 is shared between UART0, PCM and I2S interfaces */ -#define RT305X_GPIO_7 7 -#define RT305X_GPIO_8 8 -#define RT305X_GPIO_9 9 -#define RT305X_GPIO_10 10 -#define RT305X_GPIO_11 11 -#define RT305X_GPIO_12 12 -#define RT305X_GPIO_13 13 -#define RT305X_GPIO_14 14 -#define RT305X_GPIO_UART1_TXD 15 -#define RT305X_GPIO_UART1_RXD 16 -#define RT305X_GPIO_JTAG_TDO 17 -#define RT305X_GPIO_JTAG_TDI 18 -#define RT305X_GPIO_JTAG_TMS 19 -#define RT305X_GPIO_JTAG_TCLK 20 -#define RT305X_GPIO_JTAG_TRST_N 21 -#define RT305X_GPIO_MDIO_MDC 22 -#define RT305X_GPIO_MDIO_MDIO 23 -#define RT305X_GPIO_SDRAM_MD16 24 -#define RT305X_GPIO_SDRAM_MD17 25 -#define RT305X_GPIO_SDRAM_MD18 26 -#define RT305X_GPIO_SDRAM_MD19 27 -#define RT305X_GPIO_SDRAM_MD20 28 -#define RT305X_GPIO_SDRAM_MD21 29 -#define RT305X_GPIO_SDRAM_MD22 30 -#define RT305X_GPIO_SDRAM_MD23 31 -#define RT305X_GPIO_SDRAM_MD24 32 -#define RT305X_GPIO_SDRAM_MD25 33 -#define RT305X_GPIO_SDRAM_MD26 34 -#define RT305X_GPIO_SDRAM_MD27 35 -#define RT305X_GPIO_SDRAM_MD28 36 -#define RT305X_GPIO_SDRAM_MD29 37 -#define RT305X_GPIO_SDRAM_MD30 38 -#define RT305X_GPIO_SDRAM_MD31 39 -#define RT305X_GPIO_GE0_TXD0 40 -#define RT305X_GPIO_GE0_TXD1 41 -#define RT305X_GPIO_GE0_TXD2 42 -#define RT305X_GPIO_GE0_TXD3 43 -#define RT305X_GPIO_GE0_TXEN 44 -#define RT305X_GPIO_GE0_TXCLK 45 -#define RT305X_GPIO_GE0_RXD0 46 -#define RT305X_GPIO_GE0_RXD1 47 -#define RT305X_GPIO_GE0_RXD2 48 -#define RT305X_GPIO_GE0_RXD3 49 -#define RT305X_GPIO_GE0_RXDV 50 -#define RT305X_GPIO_GE0_RXCLK 51 - -void rt305x_gpio_init(u32 mode); - -#endif /* _RT305X_H_ */ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h deleted file mode 100644 index 8c1261106c..0000000000 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Ralink RT305x specific CPU feature overrides - * - * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This file was derived from: include/asm-mips/cpu-features.h - * Copyright (C) 2003, 2004 Ralf Baechle - * Copyright (C) 2004 Maciej W. Rozycki - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ -#ifndef __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H - -#define cpu_has_tlb 1 -#define cpu_has_4kex 1 -#define cpu_has_3k_cache 0 -#define cpu_has_4k_cache 1 -#define cpu_has_tx39_cache 0 -#define cpu_has_sb1_cache 0 -#define cpu_has_fpu 0 -#define cpu_has_32fpr 0 -#define cpu_has_counter 1 -#define cpu_has_watch 1 -#define cpu_has_divec 1 - -#define cpu_has_prefetch 1 -#define cpu_has_ejtag 1 -#define cpu_has_llsc 1 - -#define cpu_has_mips16 1 -#define cpu_has_mdmx 0 -#define cpu_has_mips3d 0 -#define cpu_has_smartmips 0 - -#define cpu_has_mips32r1 1 -#define cpu_has_mips32r2 1 -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 - -#define cpu_has_dsp 1 -#define cpu_has_mipsmt 0 - -#define cpu_has_64bits 0 -#define cpu_has_64bit_zero_reg 0 -#define cpu_has_64bit_gp_regs 0 -#define cpu_has_64bit_addresses 0 - -#define cpu_dcache_line_size() 32 -#define cpu_icache_line_size() 32 - -#endif /* __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x/irq.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x/irq.h deleted file mode 100644 index a72d677142..0000000000 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x/irq.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ -#ifndef __ASM_MACH_RALINK_RT305X_IRQ_H -#define __ASM_MACH_RALINK_RT305X_IRQ_H - -#define MIPS_CPU_IRQ_BASE 0 -#define NR_IRQS 48 - -#include_next <irq.h> - -#endif /* __ASM_MACH_RALINK_RT305X_IRQ_H */ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h deleted file mode 100644 index 2098c5cc1f..0000000000 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Ralink RT305x SoC platform device registration - * - * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _RT305X_ESW_PLATFORM_H -#define _RT305X_ESW_PLATFORM_H - -enum { - RT305X_ESW_VLAN_CONFIG_NONE = 0, - RT305X_ESW_VLAN_CONFIG_LLLLW, - RT305X_ESW_VLAN_CONFIG_WLLLL, -}; - -struct rt305x_esw_platform_data -{ - u8 vlan_config; - u32 reg_initval_fct2; - u32 reg_initval_fpa2; -}; - -#endif /* _RT305X_ESW_PLATFORM_H */ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_regs.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_regs.h deleted file mode 100644 index 943facb6de..0000000000 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_regs.h +++ /dev/null @@ -1,216 +0,0 @@ -/* - * Ralink RT305 SoC register definitions - * - * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _RT305X_REGS_H_ -#define _RT305X_REGS_H_ - -#include <linux/bitops.h> - -#define RT305X_SDRAM_BASE 0x00000000 -#define RT305X_SYSC_BASE 0x10000000 -#define RT305X_TIMER_BASE 0x10000100 -#define RT305X_INTC_BASE 0x10000200 -#define RT305X_MEMC_BASE 0x10000300 -#define RT305X_PCM_BASE 0x10000400 -#define RT305X_UART0_BASE 0x10000500 -#define RT305X_PIO_BASE 0x10000600 -#define RT305X_GDMA_BASE 0x10000700 -#define RT305X_NANDC_BASE 0x10000800 -#define RT305X_I2C_BASE 0x10000900 -#define RT305X_I2S_BASE 0x10000a00 -#define RT305X_SPI_BASE 0x10000b00 -#define RT305X_UART1_BASE 0x10000c00 -#define RT305X_FE_BASE 0x10100000 -#define RT305X_SWITCH_BASE 0x10110000 -#define RT305X_WMAC_BASE 0x10180000 -#define RT305X_OTG_BASE 0x101c0000 -#define RT305X_ROM_BASE 0x00400000 -#define RT305X_FLASH1_BASE 0x1b000000 -#define RT305X_FLASH0_BASE 0x1f000000 - -#define RT305X_SYSC_SIZE 0x100 -#define RT305X_TIMER_SIZE 0x100 -#define RT305X_INTC_SIZE 0x100 -#define RT305X_MEMC_SIZE 0x100 -#define RT305X_UART0_SIZE 0x100 -#define RT305X_PIO_SIZE 0x100 -#define RT305X_UART1_SIZE 0x100 -#define RT305X_SPI_SIZE 0x100 -#define RT305X_FLASH1_SIZE (16 * 1024 * 1024) -#define RT305X_FLASH0_SIZE (8 * 1024 * 1024) - -#define RT3352_EHCI_BASE 0x101c0000 -#define RT3352_EHCI_SIZE 0x1000 -#define RT3352_OHCI_BASE 0x101c1000 -#define RT3352_OHCI_SIZE 0x1000 - -/* SYSC registers */ -#define SYSC_REG_CHIP_NAME0 0x000 /* Chip Name 0 */ -#define SYSC_REG_CHIP_NAME1 0x004 /* Chip Name 1 */ -#define SYSC_REG_CHIP_ID 0x00c /* Chip Identification */ -#define SYSC_REG_SYSTEM_CONFIG 0x010 /* System Configuration */ -#define SYSC_REG_RESET_CTRL 0x034 /* Reset Control*/ -#define SYSC_REG_RESET_STATUS 0x038 /* Reset Status*/ -#define SYSC_REG_GPIO_MODE 0x060 /* GPIO Purpose Select */ -#define SYSC_REG_IA_ADDRESS 0x310 /* Illegal Access Address */ -#define SYSC_REG_IA_TYPE 0x314 /* Illegal Access Type */ - -#define RT3352_SYSC_REG_SYSCFG1 0x014 -#define RT3352_SYSC_REG_CLKCFG1 0x030 -#define RT3352_SYSC_REG_RSTCTRL 0x034 -#define RT3352_SYSC_REG_USB_PS 0x05c - -#define RT3052_CHIP_NAME0 0x30335452 -#define RT3052_CHIP_NAME1 0x20203235 - -#define RT3350_CHIP_NAME0 0x33335452 -#define RT3350_CHIP_NAME1 0x20203035 - -#define RT3352_CHIP_NAME0 0x33335452 -#define RT3352_CHIP_NAME1 0x20203235 - -#define RT5350_CHIP_NAME0 0x33355452 -#define RT5350_CHIP_NAME1 0x20203035 - -#define CHIP_ID_ID_MASK 0xff -#define CHIP_ID_ID_SHIFT 8 -#define CHIP_ID_REV_MASK 0xff - -#define RT305X_SYSCFG_CPUCLK_SHIFT 18 -#define RT305X_SYSCFG_CPUCLK_MASK 0x1 -#define RT305X_SYSCFG_CPUCLK_LOW 0x0 -#define RT305X_SYSCFG_CPUCLK_HIGH 0x1 -#define RT305X_SYSCFG_SRAM_CS0_MODE_SHIFT 2 -#define RT305X_SYSCFG_SRAM_CS0_MODE_MASK 0x3 -#define RT305X_SYSCFG_SRAM_CS0_MODE_NORMAL 0 -#define RT305X_SYSCFG_SRAM_CS0_MODE_WDT 1 -#define RT305X_SYSCFG_SRAM_CS0_MODE_BTCOEX 2 - -#define RT3352_SYSCFG0_CPUCLK_SHIFT 8 -#define RT3352_SYSCFG0_CPUCLK_MASK 0x1 -#define RT3352_SYSCFG0_CPUCLK_LOW 0x0 -#define RT3352_SYSCFG0_CPUCLK_HIGH 0x1 - -#define RT5350_SYSCFG0_CPUCLK_SHIFT 8 -#define RT5350_SYSCFG0_CPUCLK_MASK 0x3 -#define RT5350_SYSCFG0_CPUCLK_360 0x0 -#define RT5350_SYSCFG0_CPUCLK_320 0x2 -#define RT5350_SYSCFG0_CPUCLK_300 0x3 -#define RT5350_SYSCFG0_DRAM_SIZE_SHIFT 12 -#define RT5350_SYSCFG0_DRAM_SIZE_MASK 7 -#define RT5350_SYSCFG0_DRAM_SIZE_2M 0 -#define RT5350_SYSCFG0_DRAM_SIZE_8M 1 -#define RT5350_SYSCFG0_DRAM_SIZE_16M 2 -#define RT5350_SYSCFG0_DRAM_SIZE_32M 3 -#define RT5350_SYSCFG0_DRAM_SIZE_64M 4 - -#define RT3352_SYSCFG0_XTAL_SEL BIT(20) - -#define RT3352_SYSCFG1_USB0_HOST_MODE BIT(10) - -#define RT3352_CLKCFG1_UPHY0_CLK_EN BIT(18) -#define RT3352_CLKCFG1_UPHY1_CLK_EN BIT(20) - -#define RT305X_GPIO_MODE_I2C BIT(0) -#define RT305X_GPIO_MODE_SPI BIT(1) -#define RT305X_GPIO_MODE_UART0_SHIFT 2 -#define RT305X_GPIO_MODE_UART0_MASK 0x7 -#define RT305X_GPIO_MODE_UART0(x) ((x) << RT305X_GPIO_MODE_UART0_SHIFT) -#define RT305X_GPIO_MODE_UARTF 0x0 -#define RT305X_GPIO_MODE_PCM_UARTF 0x1 -#define RT305X_GPIO_MODE_PCM_I2S 0x2 -#define RT305X_GPIO_MODE_I2S_UARTF 0x3 -#define RT305X_GPIO_MODE_PCM_GPIO 0x4 -#define RT305X_GPIO_MODE_GPIO_UARTF 0x5 -#define RT305X_GPIO_MODE_GPIO_I2S 0x6 -#define RT305X_GPIO_MODE_GPIO 0x7 -#define RT305X_GPIO_MODE_UART1 BIT(5) -#define RT305X_GPIO_MODE_JTAG BIT(6) -#define RT305X_GPIO_MODE_MDIO BIT(7) -#define RT305X_GPIO_MODE_SDRAM BIT(8) -#define RT305X_GPIO_MODE_RGMII BIT(9) - -#define RT305X_RESET_SYSTEM BIT(0) -#define RT305X_RESET_TIMER BIT(8) -#define RT305X_RESET_INTC BIT(9) -#define RT305X_RESET_MEMC BIT(10) -#define RT305X_RESET_PCM BIT(11) -#define RT305X_RESET_UART0 BIT(12) -#define RT305X_RESET_PIO BIT(13) -#define RT305X_RESET_DMA BIT(14) -#define RT305X_RESET_I2C BIT(16) -#define RT305X_RESET_I2S BIT(17) -#define RT305X_RESET_SPI BIT(18) -#define RT305X_RESET_UART1 BIT(19) -#define RT305X_RESET_WNIC BIT(20) -#define RT305X_RESET_FE BIT(21) -#define RT305X_RESET_OTG BIT(22) -#define RT305X_RESET_ESW BIT(23) - -#define RT3352_RSTCTRL_SYS BIT(0) -#define RT3352_RSTCTRL_TIMER BIT(8) -#define RT3352_RSTCTRL_INTC BIT(9) -#define RT3352_RSTCTRL_MEMC BIT(10) -#define RT3352_RSTCTRL_PCM BIT(11) -#define RT3352_RSTCTRL_UART0 BIT(12) -#define RT3352_RSTCTRL_PIO BIT(13) -#define RT3352_RSTCTRL_DMA BIT(14) -#define RT3352_RSTCTRL_I2C BIT(16) -#define RT3352_RSTCTRL_I2S BIT(17) -#define RT3352_RSTCTRL_SPI BIT(18) -#define RT3352_RSTCTRL_UART1 BIT(19) -#define RT3352_RSTCTRL_WNIC BIT(20) -#define RT3352_RSTCTRL_FE BIT(21) -#define RT3352_RSTCTRL_UHST BIT(22) -#define RT3352_RSTCTRL_ESW BIT(23) -#define RT3352_RSTCTRL_EPHY BIT(24) -#define RT3352_RSTCTRL_UDEV BIT(25) - -#define RT305X_INTC_INT_SYSCTL BIT(0) -#define RT305X_INTC_INT_TIMER0 BIT(1) -#define RT305X_INTC_INT_TIMER1 BIT(2) -#define RT305X_INTC_INT_IA BIT(3) -#define RT305X_INTC_INT_PCM BIT(4) -#define RT305X_INTC_INT_UART0 BIT(5) -#define RT305X_INTC_INT_PIO BIT(6) -#define RT305X_INTC_INT_DMA BIT(7) -#define RT305X_INTC_INT_NAND BIT(8) -#define RT305X_INTC_INT_PERFC BIT(9) -#define RT305X_INTC_INT_I2S BIT(10) -#define RT305X_INTC_INT_UART1 BIT(12) -#define RT305X_INTC_INT_ESW BIT(17) -#define RT305X_INTC_INT_OTG BIT(18) -#define RT305X_INTC_INT_GLOBAL BIT(31) - -/* MEMC registers */ -#define MEMC_REG_SDRAM_CFG0 0x00 -#define MEMC_REG_SDRAM_CFG1 0x04 -#define MEMC_REG_FLASH_CFG0 0x08 -#define MEMC_REG_FLASH_CFG1 0x0c -#define MEMC_REG_IA_ADDR 0x10 -#define MEMC_REG_IA_TYPE 0x14 - -#define FLASH_CFG_WIDTH_SHIFT 26 -#define FLASH_CFG_WIDTH_MASK 0x3 -#define FLASH_CFG_WIDTH_8BIT 0x0 -#define FLASH_CFG_WIDTH_16BIT 0x1 -#define FLASH_CFG_WIDTH_32BIT 0x2 - -/* UART registers */ -#define UART_REG_RX 0 -#define UART_REG_TX 1 -#define UART_REG_IER 2 -#define UART_REG_IIR 3 -#define UART_REG_FCR 4 -#define UART_REG_LCR 5 -#define UART_REG_MCR 6 -#define UART_REG_LSR 7 - -#endif /* _RT305X_REGS_H_ */ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883.h deleted file mode 100644 index cf8fb6fd10..0000000000 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883.h +++ /dev/null @@ -1,152 +0,0 @@ -/* - * Ralink RT3662/RT3883 SoC specific definitions - * - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * Parts of this file are based on Ralink's 2.6.21 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _RT3883_H_ -#define _RT3883_H_ - -#include <linux/init.h> -#include <linux/io.h> - -#define RT3883_MEM_SIZE_MIN (2 * 1024 * 1024) -#define RT3883_MEM_SIZE_MAX (256 * 1024 * 1024) - -#define RT3883_CPU_IRQ_BASE 0 -#define RT3883_CPU_IRQ_COUNT 8 -#define RT3883_INTC_IRQ_BASE (RT3883_CPU_IRQ_BASE + RT3883_CPU_IRQ_COUNT) -#define RT3883_INTC_IRQ_COUNT 32 -#define RT3883_GPIO_IRQ_BASE (RT3883_INTC_IRQ_BASE + RT3883_INTC_IRQ_COUNT) -#define RT3883_GPIO_IRQ_COUNT 96 -#define RT3883_PCI_IRQ_BASE (RT3883_GPIO_IRQ_BASE + RT3883_GPIO_IRQ_COUNT) -#define RT3883_PCI_IRQ_COUNT 3 - -#define RT3883_CPU_IRQ_INTC (RT3883_CPU_IRQ_BASE + 2) -#define RT3883_CPU_IRQ_PCI (RT3883_CPU_IRQ_BASE + 4) -#define RT3883_CPU_IRQ_FE (RT3883_CPU_IRQ_BASE + 5) -#define RT3883_CPU_IRQ_WLAN (RT3883_CPU_IRQ_BASE + 6) -#define RT3883_CPU_IRQ_COUNTER (RT3883_CPU_IRQ_BASE + 7) - -#define RT3883_INTC_IRQ_SYSCTL (RT3883_INTC_IRQ_BASE + 0) -#define RT3883_INTC_IRQ_TIMER0 (RT3883_INTC_IRQ_BASE + 1) -#define RT3883_INTC_IRQ_TIMER1 (RT3883_INTC_IRQ_BASE + 2) -#define RT3883_INTC_IRQ_IA (RT3883_INTC_IRQ_BASE + 3) -#define RT3883_INTC_IRQ_PCM (RT3883_INTC_IRQ_BASE + 4) -#define RT3883_INTC_IRQ_UART0 (RT3883_INTC_IRQ_BASE + 5) -#define RT3883_INTC_IRQ_PIO (RT3883_INTC_IRQ_BASE + 6) -#define RT3883_INTC_IRQ_DMA (RT3883_INTC_IRQ_BASE + 7) -#define RT3883_INTC_IRQ_NAND (RT3883_INTC_IRQ_BASE + 8) -#define RT3883_INTC_IRQ_PERFC (RT3883_INTC_IRQ_BASE + 9) -#define RT3883_INTC_IRQ_I2S (RT3883_INTC_IRQ_BASE + 10) -#define RT3883_INTC_IRQ_UART1 (RT3883_INTC_IRQ_BASE + 12) -#define RT3883_INTC_IRQ_UHST (RT3883_INTC_IRQ_BASE + 18) -#define RT3883_INTC_IRQ_UDEV (RT3883_INTC_IRQ_BASE + 19) - -#define RT3883_PCI_IRQ_PCI0 (RT3883_PCI_IRQ_BASE + 0) -#define RT3883_PCI_IRQ_PCI1 (RT3883_PCI_IRQ_BASE + 1) -#define RT3883_PCI_IRQ_PCIE (RT3883_PCI_IRQ_BASE + 2) - -extern void __iomem *rt3883_sysc_base; -extern void __iomem *rt3883_memc_base; - -static inline void rt3883_sysc_wr(u32 val, unsigned reg) -{ - __raw_writel(val, rt3883_sysc_base + reg); -} - -static inline u32 rt3883_sysc_rr(unsigned reg) -{ - return __raw_readl(rt3883_sysc_base + reg); -} - -static inline void rt3883_memc_wr(u32 val, unsigned reg) -{ - __raw_writel(val, rt3883_memc_base + reg); -} - -static inline u32 rt3883_memc_rr(unsigned reg) -{ - return __raw_readl(rt3883_memc_base + reg); -} - -#define RT3883_GPIO_I2C_SD 1 -#define RT3883_GPIO_I2C_SCLK 2 -#define RT3883_GPIO_SPI_CS0 3 -#define RT3883_GPIO_SPI_CLK 4 -#define RT3883_GPIO_SPI_MOSI 5 -#define RT3883_GPIO_SPI_MISO 6 -/* GPIO 7-14 is shared between UART0, PCM and I2S interfaces */ -#define RT3883_GPIO_7 7 -#define RT3883_GPIO_8 8 -#define RT3883_GPIO_9 9 -#define RT3883_GPIO_10 10 -#define RT3883_GPIO_11 11 -#define RT3883_GPIO_12 12 -#define RT3883_GPIO_13 13 -#define RT3883_GPIO_14 14 -#define RT3883_GPIO_UART1_TXD 15 -#define RT3883_GPIO_UART1_RXD 16 -#define RT3883_GPIO_JTAG_TDO 17 -#define RT3883_GPIO_JTAG_TDI 18 -#define RT3883_GPIO_JTAG_TMS 19 -#define RT3883_GPIO_JTAG_TCLK 20 -#define RT3883_GPIO_JTAG_TRST_N 21 -#define RT3883_GPIO_MDIO_MDC 22 -#define RT3883_GPIO_MDIO_MDIO 23 -#define RT3883_GPIO_LNA_PE_A0 32 -#define RT3883_GPIO_LNA_PE_A1 33 -#define RT3883_GPIO_LNA_PE_A2 34 -#define RT3883_GPIO_LNA_PE_G0 35 -#define RT3883_GPIO_LNA_PE_G1 36 -#define RT3883_GPIO_LNA_PE_G2 37 -#define RT3883_GPIO_PCI_AD0 40 -#define RT3883_GPIO_PCI_AD31 71 -#define RT3883_GPIO_GE2_TXD0 72 -#define RT3883_GPIO_GE2_TXD1 73 -#define RT3883_GPIO_GE2_TXD2 74 -#define RT3883_GPIO_GE2_TXD3 75 -#define RT3883_GPIO_GE2_TXEN 76 -#define RT3883_GPIO_GE2_TXCLK 77 -#define RT3883_GPIO_GE2_RXD0 78 -#define RT3883_GPIO_GE2_RXD1 79 -#define RT3883_GPIO_GE2_RXD2 80 -#define RT3883_GPIO_GE2_RXD3 81 -#define RT3883_GPIO_GE2_RXDV 82 -#define RT3883_GPIO_GE2_RXCLK 83 -#define RT3883_GPIO_GE1_TXD0 84 -#define RT3883_GPIO_GE1_TXD1 85 -#define RT3883_GPIO_GE1_TXD2 86 -#define RT3883_GPIO_GE1_TXD3 87 -#define RT3883_GPIO_GE1_TXEN 88 -#define RT3883_GPIO_GE1_TXCLK 89 -#define RT3883_GPIO_GE1_RXD0 90 -#define RT3883_GPIO_GE1_RXD1 91 -#define RT3883_GPIO_GE1_RXD2 92 -#define RT3883_GPIO_GE1_RXD3 93 -#define RT3883_GPIO_GE1_RXDV 94 -#define RT3883_GPIO_GE1_RXCLK 95 - -void rt3883_gpio_init(u32 mode); - -#define RT3883_PCI_MODE_PCI 0x01 -#define RT3883_PCI_MODE_PCIE 0x02 -#define RT3883_PCI_MODE_BOTH (RT3883_PCI_MODE_PCI | RT3883_PCI_MODE_PCIE) - -struct pci_dev; - -#ifdef CONFIG_PCI -void rt3883_pci_init(unsigned mode); -void rt3883_pci_set_plat_dev_init(int (*f)(struct pci_dev *)); -#else -static inline void rt3883_pci_init(unsigned mode) {} -static inline void rt3883_pci_set_plat_dev_init(int (*f)(struct pci_dev *)) {} -#endif /* CONFIG_PCI */ - -#endif /* _RT3883_H_ */ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h deleted file mode 100644 index ac435dd330..0000000000 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * Ralink RT3662/RT3883 specific CPU feature overrides - * - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This file was derived from: include/asm-mips/cpu-features.h - * Copyright (C) 2003, 2004 Ralf Baechle - * Copyright (C) 2004 Maciej W. Rozycki - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ -#ifndef __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H - -#define cpu_has_tlb 1 -#define cpu_has_4kex 1 -#define cpu_has_3k_cache 0 -#define cpu_has_4k_cache 1 -#define cpu_has_tx39_cache 0 -#define cpu_has_sb1_cache 0 -#define cpu_has_fpu 0 -#define cpu_has_32fpr 0 -#define cpu_has_counter 1 -#define cpu_has_watch 1 -#define cpu_has_divec 1 - -#define cpu_has_prefetch 1 -#define cpu_has_ejtag 1 -#define cpu_has_llsc 1 - -#define cpu_has_mips16 1 -#define cpu_has_mdmx 0 -#define cpu_has_mips3d 0 -#define cpu_has_smartmips 0 - -#define cpu_has_mips32r1 1 -#define cpu_has_mips32r2 1 -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 - -#define cpu_has_dsp 1 -#define cpu_has_mipsmt 0 - -#define cpu_has_64bits 0 -#define cpu_has_64bit_zero_reg 0 -#define cpu_has_64bit_gp_regs 0 -#define cpu_has_64bit_addresses 0 - -#define cpu_dcache_line_size() 32 -#define cpu_icache_line_size() 32 - -#endif /* __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883/irq.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883/irq.h deleted file mode 100644 index 635d68c101..0000000000 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883/irq.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ -#ifndef __ASM_MACH_RALINK_RT3883_IRQ_H -#define __ASM_MACH_RALINK_RT3883_IRQ_H - -#define MIPS_CPU_IRQ_BASE 0 -#define NR_IRQS 140 - -#include_next <irq.h> - -#endif /* __ASM_MACH_RALINK_RT3883_IRQ_H */ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883_regs.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883_regs.h deleted file mode 100644 index b36cabe858..0000000000 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt3883_regs.h +++ /dev/null @@ -1,207 +0,0 @@ -/* - * Ralink RT3662/RT3883 SoC register definitions - * - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _RT3883_REGS_H_ -#define _RT3883_REGS_H_ - -#include <linux/bitops.h> - -#define RT3883_SDRAM_BASE 0x00000000 -#define RT3883_SYSC_BASE 0x10000000 -#define RT3883_TIMER_BASE 0x10000100 -#define RT3883_INTC_BASE 0x10000200 -#define RT3883_MEMC_BASE 0x10000300 -#define RT3883_UART0_BASE 0x10000500 -#define RT3883_PIO_BASE 0x10000600 -#define RT3883_FSCC_BASE 0x10000700 -#define RT3883_NANDC_BASE 0x10000810 -#define RT3883_I2C_BASE 0x10000900 -#define RT3883_I2S_BASE 0x10000a00 -#define RT3883_SPI_BASE 0x10000b00 -#define RT3883_UART1_BASE 0x10000c00 -#define RT3883_PCM_BASE 0x10002000 -#define RT3883_GDMA_BASE 0x10002800 -#define RT3883_CODEC1_BASE 0x10003000 -#define RT3883_CODEC2_BASE 0x10003800 -#define RT3883_FE_BASE 0x10100000 -#define RT3883_ROM_BASE 0x10118000 -#define RT3883_USBDEV_BASE 0x10112000 -#define RT3883_PCI_BASE 0x10140000 -#define RT3883_WLAN_BASE 0x10180000 -#define RT3883_USBHOST_BASE 0x101c0000 -#define RT3883_BOOT_BASE 0x1c000000 -#define RT3883_SRAM_BASE 0x1e000000 -#define RT3883_PCIMEM_BASE 0x20000000 - -#define RT3883_EHCI_BASE (RT3883_USBHOST_BASE) -#define RT3883_OHCI_BASE (RT3883_USBHOST_BASE + 0x1000) - -#define RT3883_SYSC_SIZE 0x100 -#define RT3883_TIMER_SIZE 0x100 -#define RT3883_INTC_SIZE 0x100 -#define RT3883_MEMC_SIZE 0x100 -#define RT3883_UART0_SIZE 0x100 -#define RT3883_UART1_SIZE 0x100 -#define RT3883_PIO_SIZE 0x100 -#define RT3883_FSCC_SIZE 0x100 -#define RT3883_NANDC_SIZE 0x0f0 -#define RT3883_I2C_SIZE 0x100 -#define RT3883_I2S_SIZE 0x100 -#define RT3883_SPI_SIZE 0x100 -#define RT3883_PCM_SIZE 0x800 -#define RT3883_GDMA_SIZE 0x800 -#define RT3883_CODEC1_SIZE 0x800 -#define RT3883_CODEC2_SIZE 0x800 -#define RT3883_FE_SIZE 0x10000 -#define RT3883_ROM_SIZE 0x4000 -#define RT3883_USBDEV_SIZE 0x4000 -#define RT3883_PCI_SIZE 0x40000 -#define RT3883_WLAN_SIZE 0x40000 -#define RT3883_USBHOST_SIZE 0x40000 -#define RT3883_BOOT_SIZE (32 * 1024 * 1024) -#define RT3883_SRAM_SIZE (32 * 1024 * 1024) - -/* SYSC registers */ -#define RT3883_SYSC_REG_CHIPID0_3 0x00 /* Chip ID 0 */ -#define RT3883_SYSC_REG_CHIPID4_7 0x04 /* Chip ID 1 */ -#define RT3883_SYSC_REG_REVID 0x0c /* Chip Revision Identification */ -#define RT3883_SYSC_REG_SYSCFG0 0x10 /* System Configuration 0 */ -#define RT3883_SYSC_REG_SYSCFG1 0x14 /* System Configuration 1 */ -#define RT3883_SYSC_REG_CLKCFG0 0x2c /* Clock Configuration 0 */ -#define RT3883_SYSC_REG_CLKCFG1 0x30 /* Clock Configuration 1 */ -#define RT3883_SYSC_REG_RSTCTRL 0x34 /* Reset Control*/ -#define RT3883_SYSC_REG_RSTSTAT 0x38 /* Reset Status*/ -#define RT3883_SYSC_REG_USB_PS 0x5c /* USB Power saving control */ -#define RT3883_SYSC_REG_GPIO_MODE 0x60 /* GPIO Purpose Select */ -#define RT3883_SYSC_REG_PCIE_CLK_GEN0 0x7c -#define RT3883_SYSC_REG_PCIE_CLK_GEN1 0x80 -#define RT3883_SYSC_REG_PCIE_CLK_GEN2 0x84 -#define RT3883_SYSC_REG_PMU 0x88 -#define RT3883_SYSC_REG_PMU1 0x8c - -#define RT3883_REVID_VER_ID_MASK 0x0f -#define RT3883_REVID_VER_ID_SHIFT 8 -#define RT3883_REVID_ECO_ID_MASK 0x0f - -#define RT3883_SYSCFG0_DRAM_TYPE_DDR2 BIT(17) -#define RT3883_SYSCFG0_CPUCLK_SHIFT 8 -#define RT3883_SYSCFG0_CPUCLK_MASK 0x3 -#define RT3883_SYSCFG0_CPUCLK_250 0x0 -#define RT3883_SYSCFG0_CPUCLK_384 0x1 -#define RT3883_SYSCFG0_CPUCLK_480 0x2 -#define RT3883_SYSCFG0_CPUCLK_500 0x3 - -#define RT3883_SYSCFG1_USB0_HOST_MODE BIT(10) -#define RT3883_SYSCFG1_PCIE_RC_MODE BIT(8) -#define RT3883_SYSCFG1_PCI_HOST_MODE BIT(7) -#define RT3883_SYSCFG1_PCI_66M_MODE BIT(6) -#define RT3883_SYSCFG1_GPIO2_AS_WDT_OUT BIT(2) - -#define RT3883_CLKCFG1_PCIE_CLK_EN BIT(21) -#define RT3883_CLKCFG1_UPHY1_CLK_EN BIT(20) -#define RT3883_CLKCFG1_PCI_CLK_EN BIT(19) -#define RT3883_CLKCFG1_UPHY0_CLK_EN BIT(18) - -#define RT3883_GPIO_MODE_I2C BIT(0) -#define RT3883_GPIO_MODE_SPI BIT(1) -#define RT3883_GPIO_MODE_UART0_SHIFT 2 -#define RT3883_GPIO_MODE_UART0_MASK 0x7 -#define RT3883_GPIO_MODE_UART0(x) ((x) << RT3883_GPIO_MODE_UART0_SHIFT) -#define RT3883_GPIO_MODE_UARTF 0x0 -#define RT3883_GPIO_MODE_PCM_UARTF 0x1 -#define RT3883_GPIO_MODE_PCM_I2S 0x2 -#define RT3883_GPIO_MODE_I2S_UARTF 0x3 -#define RT3883_GPIO_MODE_PCM_GPIO 0x4 -#define RT3883_GPIO_MODE_GPIO_UARTF 0x5 -#define RT3883_GPIO_MODE_GPIO_I2S 0x6 -#define RT3883_GPIO_MODE_GPIO 0x7 -#define RT3883_GPIO_MODE_UART1 BIT(5) -#define RT3883_GPIO_MODE_JTAG BIT(6) -#define RT3883_GPIO_MODE_MDIO BIT(7) -#define RT3883_GPIO_MODE_GE1 BIT(9) -#define RT3883_GPIO_MODE_GE2 BIT(10) -#define RT3883_GPIO_MODE_PCI_SHIFT 11 -#define RT3883_GPIO_MODE_PCI_MASK 0x7 -#define RT3883_GPIO_MODE_PCI(_x) ((_x) << RT3883_GPIO_MODE_PCI_SHIFT) -#define RT3883_GPIO_MODE_PCI_DEV 0 -#define RT3883_GPIO_MODE_PCI_HOST2 1 -#define RT3883_GPIO_MODE_PCI_HOST1 2 -#define RT3883_GPIO_MODE_PCI_FNC 3 -#define RT3883_GPIO_MODE_PCI_GPIO 7 -#define RT3883_GPIO_MODE_LNA_A_SHIFT 16 -#define RT3883_GPIO_MODE_LNA_A_MASK 0x3 -#define RT3883_GPIO_MODE_LNA_A(_x) ((_x) << RT3883_GPIO_MODE_LNA_A_SHIFT) -#define RT3883_GPIO_MODE_LNA_A_GPIO 0x3 -#define RT3883_GPIO_MODE_LNA_G_SHIFT 18 -#define RT3883_GPIO_MODE_LNA_G_MASK 0x3 -#define RT3883_GPIO_MODE_LNA_G(_x) ((_x) << RT3883_GPIO_MODE_LNA_G_SHIFT) -#define RT3883_GPIO_MODE_LNA_G_GPIO 0x3 - -#define RT3883_RSTCTRL_PCIE_PCI_PDM BIT(27) -#define RT3883_RSTCTRL_FLASH BIT(26) -#define RT3883_RSTCTRL_UDEV BIT(25) -#define RT3883_RSTCTRL_PCI BIT(24) -#define RT3883_RSTCTRL_PCIE BIT(23) -#define RT3883_RSTCTRL_UHST BIT(22) -#define RT3883_RSTCTRL_FE BIT(21) -#define RT3883_RSTCTRL_WLAN BIT(20) -#define RT3883_RSTCTRL_UART1 BIT(29) -#define RT3883_RSTCTRL_SPI BIT(18) -#define RT3883_RSTCTRL_I2S BIT(17) -#define RT3883_RSTCTRL_I2C BIT(16) -#define RT3883_RSTCTRL_NAND BIT(15) -#define RT3883_RSTCTRL_DMA BIT(14) -#define RT3883_RSTCTRL_PIO BIT(13) -#define RT3883_RSTCTRL_UART BIT(12) -#define RT3883_RSTCTRL_PCM BIT(11) -#define RT3883_RSTCTRL_MC BIT(10) -#define RT3883_RSTCTRL_INTC BIT(9) -#define RT3883_RSTCTRL_TIMER BIT(8) -#define RT3883_RSTCTRL_SYS BIT(0) - -#define RT3883_INTC_INT_SYSCTL BIT(0) -#define RT3883_INTC_INT_TIMER0 BIT(1) -#define RT3883_INTC_INT_TIMER1 BIT(2) -#define RT3883_INTC_INT_IA BIT(3) -#define RT3883_INTC_INT_PCM BIT(4) -#define RT3883_INTC_INT_UART0 BIT(5) -#define RT3883_INTC_INT_PIO BIT(6) -#define RT3883_INTC_INT_DMA BIT(7) -#define RT3883_INTC_INT_NAND BIT(8) -#define RT3883_INTC_INT_PERFC BIT(9) -#define RT3883_INTC_INT_I2S BIT(10) -#define RT3883_INTC_INT_UART1 BIT(12) -#define RT3883_INTC_INT_UHST BIT(18) -#define RT3883_INTC_INT_UDEV BIT(19) - -/* FLASH/SRAM/Codec Controller registers */ -#define RT3883_FSCC_REG_FLASH_CFG0 0x00 -#define RT3883_FSCC_REG_FLASH_CFG1 0x04 -#define RT3883_FSCC_REG_CODEC_CFG0 0x40 -#define RT3883_FSCC_REG_CODEC_CFG1 0x44 - -#define RT3883_FLASH_CFG_WIDTH_SHIFT 26 -#define RT3883_FLASH_CFG_WIDTH_MASK 0x3 -#define RT3883_FLASH_CFG_WIDTH_8BIT 0x0 -#define RT3883_FLASH_CFG_WIDTH_16BIT 0x1 -#define RT3883_FLASH_CFG_WIDTH_32BIT 0x2 - - -/* UART registers */ -#define RT3883_UART_REG_RX 0 -#define RT3883_UART_REG_TX 1 -#define RT3883_UART_REG_IER 2 -#define RT3883_UART_REG_IIR 3 -#define RT3883_UART_REG_FCR 4 -#define RT3883_UART_REG_LCR 5 -#define RT3883_UART_REG_MCR 6 -#define RT3883_UART_REG_LSR 7 - -#endif /* _RT3883_REGS_H_ */ diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/war.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/war.h deleted file mode 100644 index a7b712cf2d..0000000000 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> - */ -#ifndef __ASM_MACH_RALINK_WAR_H -#define __ASM_MACH_RALINK_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MACH_RALINK_WAR_H */ diff --git a/target/linux/ramips/files/arch/mips/pci/pci-rt288x.c b/target/linux/ramips/files/arch/mips/pci/pci-rt288x.c deleted file mode 100644 index f67902272c..0000000000 --- a/target/linux/ramips/files/arch/mips/pci/pci-rt288x.c +++ /dev/null @@ -1,250 +0,0 @@ -/* - * Ralink RT288x SoC PCI register definitions - * - * Copyright (C) 2009 John Crispin <blogic@openwrt.org> - * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> - * - * Parts of this file are based on Ralink's 2.6.21 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/io.h> -#include <linux/init.h> - -#include <asm/mach-ralink/rt288x.h> -#include <asm/mach-ralink/rt288x_regs.h> - -#define RT2880_PCI_MEM_BASE 0x20000000 -#define RT2880_PCI_MEM_SIZE 0x10000000 -#define RT2880_PCI_IO_BASE 0x00460000 -#define RT2880_PCI_IO_SIZE 0x00010000 - -#define RT2880_PCI_REG_PCICFG_ADDR 0x00 -#define RT2880_PCI_REG_PCIMSK_ADDR 0x0c -#define RT2880_PCI_REG_BAR0SETUP_ADDR 0x10 -#define RT2880_PCI_REG_IMBASEBAR0_ADDR 0x18 -#define RT2880_PCI_REG_CONFIG_ADDR 0x20 -#define RT2880_PCI_REG_CONFIG_DATA 0x24 -#define RT2880_PCI_REG_MEMBASE 0x28 -#define RT2880_PCI_REG_IOBASE 0x2c -#define RT2880_PCI_REG_ID 0x30 -#define RT2880_PCI_REG_CLASS 0x34 -#define RT2880_PCI_REG_SUBID 0x38 -#define RT2880_PCI_REG_ARBCTL 0x80 - -static void __iomem *rt2880_pci_base; -static DEFINE_SPINLOCK(rt2880_pci_lock); - -static u32 rt2880_pci_reg_read(u32 reg) -{ - return readl(rt2880_pci_base + reg); -} - -static void rt2880_pci_reg_write(u32 val, u32 reg) -{ - writel(val, rt2880_pci_base + reg); -} - -static inline u32 rt2880_pci_get_cfgaddr(unsigned int bus, unsigned int slot, - unsigned int func, unsigned int where) -{ - return ((bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | - 0x80000000); -} - -static int rt2880_pci_config_read(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 *val) -{ - unsigned long flags; - u32 address; - u32 data; - - address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn), - PCI_FUNC(devfn), where); - - spin_lock_irqsave(&rt2880_pci_lock, flags); - rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR); - data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA); - spin_unlock_irqrestore(&rt2880_pci_lock, flags); - - switch (size) { - case 1: - *val = (data >> ((where & 3) << 3)) & 0xff; - break; - case 2: - *val = (data >> ((where & 3) << 3)) & 0xffff; - break; - case 4: - *val = data; - break; - } - - return PCIBIOS_SUCCESSFUL; -} - -static int rt2880_pci_config_write(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 val) -{ - unsigned long flags; - u32 address; - u32 data; - - address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn), - PCI_FUNC(devfn), where); - - spin_lock_irqsave(&rt2880_pci_lock, flags); - rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR); - data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA); - - switch (size) { - case 1: - data = (data & ~(0xff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - break; - case 2: - data = (data & ~(0xffff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - break; - case 4: - data = val; - break; - } - - rt2880_pci_reg_write(data, RT2880_PCI_REG_CONFIG_DATA); - spin_unlock_irqrestore(&rt2880_pci_lock, flags); - - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops rt2880_pci_ops = { - .read = rt2880_pci_config_read, - .write = rt2880_pci_config_write, -}; - -static struct resource rt2880_pci_mem_resource = { - .name = "PCI MEM space", - .start = RT2880_PCI_MEM_BASE, - .end = RT2880_PCI_MEM_BASE + RT2880_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct resource rt2880_pci_io_resource = { - .name = "PCI IO space", - .start = RT2880_PCI_IO_BASE, - .end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO, -}; - -static struct pci_controller rt2880_pci_controller = { - .pci_ops = &rt2880_pci_ops, - .mem_resource = &rt2880_pci_mem_resource, - .io_resource = &rt2880_pci_io_resource, -}; - -static inline u32 rt2880_pci_read_u32(unsigned long reg) -{ - unsigned long flags; - u32 address; - u32 ret; - - address = rt2880_pci_get_cfgaddr(0, 0, 0, reg); - - spin_lock_irqsave(&rt2880_pci_lock, flags); - rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR); - ret = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA); - spin_unlock_irqrestore(&rt2880_pci_lock, flags); - - return ret; -} - -static inline void rt2880_pci_write_u32(unsigned long reg, u32 val) -{ - unsigned long flags; - u32 address; - - address = rt2880_pci_get_cfgaddr(0, 0, 0, reg); - - spin_lock_irqsave(&rt2880_pci_lock, flags); - rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR); - rt2880_pci_reg_write(val, RT2880_PCI_REG_CONFIG_DATA); - spin_unlock_irqrestore(&rt2880_pci_lock, flags); -} - -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - u16 cmd; - int irq = -1; - - if (dev->bus->number != 0) - return irq; - - switch (PCI_SLOT(dev->devfn)) { - case 0x00: - rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000); - (void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0); - break; - case 0x11: - irq = RT288X_CPU_IRQ_PCI; - break; - default: - printk("%s:%s[%d] trying to alloc unknown pci irq\n", - __FILE__, __func__, __LINE__); - BUG(); - break; - } - - pci_write_config_byte((struct pci_dev*)dev, PCI_CACHE_LINE_SIZE, 0x14); - pci_write_config_byte((struct pci_dev*)dev, PCI_LATENCY_TIMER, 0xFF); - pci_read_config_word((struct pci_dev*)dev, PCI_COMMAND, &cmd); - cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | - PCI_COMMAND_INVALIDATE | PCI_COMMAND_FAST_BACK | - PCI_COMMAND_SERR | PCI_COMMAND_WAIT | PCI_COMMAND_PARITY; - pci_write_config_word((struct pci_dev*)dev, PCI_COMMAND, cmd); - pci_write_config_byte((struct pci_dev*)dev, PCI_INTERRUPT_LINE, - dev->irq); - return irq; -} - -int __init rt288x_register_pci(void) -{ - void __iomem *io_map_base; - int i; - - rt2880_pci_base = ioremap_nocache(RT2880_PCI_BASE, PAGE_SIZE); - - io_map_base = ioremap(RT2880_PCI_IO_BASE, RT2880_PCI_IO_SIZE); - rt2880_pci_controller.io_map_base = (unsigned long) io_map_base; - set_io_port_base((unsigned long) io_map_base); - - ioport_resource.start = RT2880_PCI_IO_BASE; - ioport_resource.end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1; - - rt2880_pci_reg_write(0, RT2880_PCI_REG_PCICFG_ADDR); - for(i = 0; i < 0xfffff; i++) {} - - rt2880_pci_reg_write(0x79, RT2880_PCI_REG_ARBCTL); - rt2880_pci_reg_write(0x07FF0001, RT2880_PCI_REG_BAR0SETUP_ADDR); - rt2880_pci_reg_write(RT2880_PCI_MEM_BASE, RT2880_PCI_REG_MEMBASE); - rt2880_pci_reg_write(RT2880_PCI_IO_BASE, RT2880_PCI_REG_IOBASE); - rt2880_pci_reg_write(0x08000000, RT2880_PCI_REG_IMBASEBAR0_ADDR); - rt2880_pci_reg_write(0x08021814, RT2880_PCI_REG_ID); - rt2880_pci_reg_write(0x00800001, RT2880_PCI_REG_CLASS); - rt2880_pci_reg_write(0x28801814, RT2880_PCI_REG_SUBID); - rt2880_pci_reg_write(0x000c0000, RT2880_PCI_REG_PCIMSK_ADDR); - - rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000); - (void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0); - - register_pci_controller(&rt2880_pci_controller); - return 0; -} - -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/target/linux/ramips/files/arch/mips/pci/pci-rt3883.c b/target/linux/ramips/files/arch/mips/pci/pci-rt3883.c deleted file mode 100644 index 8a4c8ce61a..0000000000 --- a/target/linux/ramips/files/arch/mips/pci/pci-rt3883.c +++ /dev/null @@ -1,487 +0,0 @@ -/* - * Ralink RT3883 SoC PCI support - * - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * Parts of this file are based on Ralink's 2.6.21 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/io.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/interrupt.h> - -#include <asm/mach-ralink/rt3883.h> -#include <asm/mach-ralink/rt3883_regs.h> - -#define RT3883_MEMORY_BASE 0x00000000 -#define RT3883_MEMORY_SIZE 0x02000000 - -#define RT3883_PCI_MEM_BASE 0x20000000 -#define RT3883_PCI_MEM_SIZE 0x10000000 -#define RT3883_PCI_IO_BASE 0x10160000 -#define RT3883_PCI_IO_SIZE 0x00010000 - -#define RT3883_PCI_REG_PCICFG_ADDR 0x00 -#define RT3883_PCI_REG_PCIRAW_ADDR 0x04 -#define RT3883_PCI_REG_PCIINT_ADDR 0x08 -#define RT3883_PCI_REG_PCIMSK_ADDR 0x0c -#define RT3833_PCI_PCIINT_PCIE BIT(20) -#define RT3833_PCI_PCIINT_PCI1 BIT(19) -#define RT3833_PCI_PCIINT_PCI0 BIT(18) - -#define RT3883_PCI_REG_CONFIG_ADDR 0x20 -#define RT3883_PCI_REG_CONFIG_DATA 0x24 -#define RT3883_PCI_REG_MEMBASE 0x28 -#define RT3883_PCI_REG_IOBASE 0x2c -#define RT3883_PCI_REG_ARBCTL 0x80 - -#define RT3883_PCI_REG_BASE(_x) (0x1000 + (_x) * 0x1000) -#define RT3883_PCI_REG_BAR0SETUP_ADDR(_x) (RT3883_PCI_REG_BASE((_x)) + 0x10) -#define RT3883_PCI_REG_IMBASEBAR0_ADDR(_x) (RT3883_PCI_REG_BASE((_x)) + 0x18) -#define RT3883_PCI_REG_ID(_x) (RT3883_PCI_REG_BASE((_x)) + 0x30) -#define RT3883_PCI_REG_CLASS(_x) (RT3883_PCI_REG_BASE((_x)) + 0x34) -#define RT3883_PCI_REG_SUBID(_x) (RT3883_PCI_REG_BASE((_x)) + 0x38) -#define RT3883_PCI_REG_STATUS(_x) (RT3883_PCI_REG_BASE((_x)) + 0x50) - -static int (*rt3883_pci_plat_dev_init)(struct pci_dev *dev); -static void __iomem *rt3883_pci_base; -static DEFINE_SPINLOCK(rt3883_pci_lock); - -static inline u32 rt3883_pci_rr(unsigned reg) -{ - return readl(rt3883_pci_base + reg); -} - -static inline void rt3883_pci_wr(u32 val, unsigned reg) -{ - writel(val, rt3883_pci_base + reg); -} - -static inline u32 rt3883_pci_get_cfgaddr(unsigned int bus, unsigned int slot, - unsigned int func, unsigned int where) -{ - return ((bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | - 0x80000000); -} - -static u32 rt3883_pci_read_u32(unsigned bus, unsigned slot, - unsigned func, unsigned reg) -{ - unsigned long flags; - u32 address; - u32 ret; - - address = rt3883_pci_get_cfgaddr(bus, slot, func, reg); - - spin_lock_irqsave(&rt3883_pci_lock, flags); - rt3883_pci_wr(address, RT3883_PCI_REG_CONFIG_ADDR); - ret = rt3883_pci_rr(RT3883_PCI_REG_CONFIG_DATA); - spin_unlock_irqrestore(&rt3883_pci_lock, flags); - - return ret; -} - -static void rt3883_pci_write_u32(unsigned bus, unsigned slot, - unsigned func, unsigned reg, u32 val) -{ - unsigned long flags; - u32 address; - - address = rt3883_pci_get_cfgaddr(bus, slot, func, reg); - - spin_lock_irqsave(&rt3883_pci_lock, flags); - rt3883_pci_wr(address, RT3883_PCI_REG_CONFIG_ADDR); - rt3883_pci_wr(val, RT3883_PCI_REG_CONFIG_DATA); - spin_unlock_irqrestore(&rt3883_pci_lock, flags); -} - -static void rt3883_pci_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - u32 pending; - - pending = rt3883_pci_rr(RT3883_PCI_REG_PCIINT_ADDR) & - rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR); - - if (!pending) { - spurious_interrupt(); - return; - } - - if (pending & RT3833_PCI_PCIINT_PCI0) - generic_handle_irq(RT3883_PCI_IRQ_PCI0); - - if (pending & RT3833_PCI_PCIINT_PCI1) - generic_handle_irq(RT3883_PCI_IRQ_PCI1); - - if (pending & RT3833_PCI_PCIINT_PCIE) - generic_handle_irq(RT3883_PCI_IRQ_PCIE); -} - -static void rt3883_pci_irq_unmask(struct irq_data *d) -{ - int irq = d->irq; - u32 mask; - u32 t; - - switch (irq) { - case RT3883_PCI_IRQ_PCI0: - mask = RT3833_PCI_PCIINT_PCI0; - break; - case RT3883_PCI_IRQ_PCI1: - mask = RT3833_PCI_PCIINT_PCI1; - break; - case RT3883_PCI_IRQ_PCIE: - mask = RT3833_PCI_PCIINT_PCIE; - break; - default: - BUG(); - } - - t = rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR); - rt3883_pci_wr(t | mask, RT3883_PCI_REG_PCIMSK_ADDR); - /* flush write */ - rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR); -} - -static void rt3883_pci_irq_mask(struct irq_data *d) -{ - int irq = d->irq; - u32 mask; - u32 t; - - switch (irq) { - case RT3883_PCI_IRQ_PCI0: - mask = RT3833_PCI_PCIINT_PCI0; - break; - case RT3883_PCI_IRQ_PCI1: - mask = RT3833_PCI_PCIINT_PCI1; - break; - case RT3883_PCI_IRQ_PCIE: - mask = RT3833_PCI_PCIINT_PCIE; - break; - default: - BUG(); - } - - t = rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR); - rt3883_pci_wr(t & ~mask, RT3883_PCI_REG_PCIMSK_ADDR); - /* flush write */ - rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR); -} - -static struct irq_chip rt3883_pci_irq_chip = { - .name = "RT3883 PCI", - .irq_mask = rt3883_pci_irq_mask, - .irq_unmask = rt3883_pci_irq_unmask, - .irq_mask_ack = rt3883_pci_irq_mask, -}; - -static void __init rt3883_pci_irq_init(void) -{ - int i; - - /* disable all interrupts */ - rt3883_pci_wr(0, RT3883_PCI_REG_PCIMSK_ADDR); - - for (i = RT3883_PCI_IRQ_BASE; - i < RT3883_PCI_IRQ_BASE + RT3883_PCI_IRQ_COUNT; i++) { - irq_set_chip_and_handler(i, &rt3883_pci_irq_chip, - handle_level_irq); - } - - irq_set_chained_handler(RT3883_CPU_IRQ_PCI, rt3883_pci_irq_handler); -} - -static int rt3883_pci_config_read(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 *val) -{ - unsigned long flags; - u32 address; - u32 data; - - address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn), - PCI_FUNC(devfn), where); - - spin_lock_irqsave(&rt3883_pci_lock, flags); - rt3883_pci_wr(address, RT3883_PCI_REG_CONFIG_ADDR); - data = rt3883_pci_rr(RT3883_PCI_REG_CONFIG_DATA); - spin_unlock_irqrestore(&rt3883_pci_lock, flags); - - switch (size) { - case 1: - *val = (data >> ((where & 3) << 3)) & 0xff; - break; - case 2: - *val = (data >> ((where & 3) << 3)) & 0xffff; - break; - case 4: - *val = data; - break; - } - - return PCIBIOS_SUCCESSFUL; -} - -static int rt3883_pci_config_write(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 val) -{ - unsigned long flags; - u32 address; - u32 data; - - address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn), - PCI_FUNC(devfn), where); - - spin_lock_irqsave(&rt3883_pci_lock, flags); - rt3883_pci_wr(address, RT3883_PCI_REG_CONFIG_ADDR); - data = rt3883_pci_rr(RT3883_PCI_REG_CONFIG_DATA); - - switch (size) { - case 1: - data = (data & ~(0xff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - break; - case 2: - data = (data & ~(0xffff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - break; - case 4: - data = val; - break; - } - - rt3883_pci_wr(data, RT3883_PCI_REG_CONFIG_DATA); - spin_unlock_irqrestore(&rt3883_pci_lock, flags); - - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops rt3883_pci_ops = { - .read = rt3883_pci_config_read, - .write = rt3883_pci_config_write, -}; - -static struct resource rt3883_pci_mem_resource = { - .name = "PCI MEM space", - .start = RT3883_PCI_MEM_BASE, - .end = RT3883_PCI_MEM_BASE + RT3883_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct resource rt3883_pci_io_resource = { - .name = "PCI IO space", - .start = RT3883_PCI_IO_BASE, - .end = RT3883_PCI_IO_BASE + RT3883_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO, -}; - -static struct pci_controller rt3883_pci_controller = { - .pci_ops = &rt3883_pci_ops, - .mem_resource = &rt3883_pci_mem_resource, - .io_resource = &rt3883_pci_io_resource, -}; - -static void rt3883_pci_preinit(unsigned mode) -{ - u32 syscfg1; - u32 rstctrl; - u32 clkcfg1; - - if (mode & RT3883_PCI_MODE_PCIE) { - u32 val; - - val = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG1); - val &= ~(0x30); - val |= (2 << 4); - rt3883_sysc_wr(val, RT3883_SYSC_REG_SYSCFG1); - - val = rt3883_sysc_rr(RT3883_SYSC_REG_PCIE_CLK_GEN0); - val &= ~BIT(31); - rt3883_sysc_wr(val, RT3883_SYSC_REG_PCIE_CLK_GEN0); - - val = rt3883_sysc_rr(RT3883_SYSC_REG_PCIE_CLK_GEN1); - val &= 0x80ffffff; - rt3883_sysc_wr(val, RT3883_SYSC_REG_PCIE_CLK_GEN1); - - val = rt3883_sysc_rr(RT3883_SYSC_REG_PCIE_CLK_GEN1); - val |= 0xa << 24; - rt3883_sysc_wr(val, RT3883_SYSC_REG_PCIE_CLK_GEN1); - - val = rt3883_sysc_rr(RT3883_SYSC_REG_PCIE_CLK_GEN0); - val |= BIT(31); - rt3883_sysc_wr(val, RT3883_SYSC_REG_PCIE_CLK_GEN0); - - msleep(50); - } - - syscfg1 = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG1); - syscfg1 &= ~(RT3883_SYSCFG1_PCIE_RC_MODE | - RT3883_SYSCFG1_PCI_HOST_MODE); - - rstctrl = rt3883_sysc_rr(RT3883_SYSC_REG_RSTCTRL); - rstctrl |= (RT3883_RSTCTRL_PCI | RT3883_RSTCTRL_PCIE); - - clkcfg1 = rt3883_sysc_rr(RT3883_SYSC_REG_CLKCFG1); - clkcfg1 &= ~(RT3883_CLKCFG1_PCI_CLK_EN | - RT3883_CLKCFG1_PCIE_CLK_EN); - - if (mode & RT3883_PCI_MODE_PCI) { - syscfg1 |= RT3883_SYSCFG1_PCI_HOST_MODE; - clkcfg1 |= RT3883_CLKCFG1_PCI_CLK_EN; - rstctrl &= ~RT3883_RSTCTRL_PCI; - } - if (mode & RT3883_PCI_MODE_PCIE) { - syscfg1 |= RT3883_SYSCFG1_PCI_HOST_MODE | - RT3883_SYSCFG1_PCIE_RC_MODE; - clkcfg1 |= RT3883_CLKCFG1_PCIE_CLK_EN; - rstctrl &= ~RT3883_RSTCTRL_PCIE; - } - - rt3883_sysc_wr(syscfg1, RT3883_SYSC_REG_SYSCFG1); - rt3883_sysc_wr(rstctrl, RT3883_SYSC_REG_RSTCTRL); - rt3883_sysc_wr(clkcfg1, RT3883_SYSC_REG_CLKCFG1); - - msleep(500); -} - -static int rt3883_pcie_ready(void) -{ - u32 status; - - msleep(500); - - status = rt3883_pci_rr(RT3883_PCI_REG_STATUS(1)); - if (status & BIT(0)) - return 0; - - /* TODO: reset PCIe and turn off PCIe clock */ - - return -ENODEV; -} - -void __init rt3883_pci_init(unsigned mode) -{ - u32 val; - int err; - - rt3883_pci_preinit(mode); - - rt3883_pci_base = ioremap(RT3883_PCI_BASE, PAGE_SIZE); - if (rt3883_pci_base == NULL) { - pr_err("failed to ioremap PCI registers\n"); - return; - } - - rt3883_pci_wr(0, RT3883_PCI_REG_PCICFG_ADDR); - if (mode & RT3883_PCI_MODE_PCI) - rt3883_pci_wr(BIT(16), RT3883_PCI_REG_PCICFG_ADDR); - - msleep(500); - - if (mode & RT3883_PCI_MODE_PCIE) { - err = rt3883_pcie_ready(); - if (err) - return; - } - - if (mode & RT3883_PCI_MODE_PCI) - rt3883_pci_wr(0x79, RT3883_PCI_REG_ARBCTL); - - rt3883_pci_wr(RT3883_PCI_MEM_BASE, RT3883_PCI_REG_MEMBASE); - rt3883_pci_wr(RT3883_PCI_IO_BASE, RT3883_PCI_REG_IOBASE); - - /* PCI */ - rt3883_pci_wr(0x03ff0000, RT3883_PCI_REG_BAR0SETUP_ADDR(0)); - rt3883_pci_wr(RT3883_MEMORY_BASE, RT3883_PCI_REG_IMBASEBAR0_ADDR(0)); - rt3883_pci_wr(0x08021814, RT3883_PCI_REG_ID(0)); - rt3883_pci_wr(0x00800001, RT3883_PCI_REG_CLASS(0)); - rt3883_pci_wr(0x28801814, RT3883_PCI_REG_SUBID(0)); - - /* PCIe */ - rt3883_pci_wr(0x01ff0000, RT3883_PCI_REG_BAR0SETUP_ADDR(1)); - rt3883_pci_wr(RT3883_MEMORY_BASE, RT3883_PCI_REG_IMBASEBAR0_ADDR(1)); - rt3883_pci_wr(0x08021814, RT3883_PCI_REG_ID(1)); - rt3883_pci_wr(0x06040001, RT3883_PCI_REG_CLASS(1)); - rt3883_pci_wr(0x28801814, RT3883_PCI_REG_SUBID(1)); - - rt3883_pci_irq_init(); - - /* PCIe */ - val = rt3883_pci_read_u32(0, 0x01, 0, PCI_COMMAND); - val |= 0x7; - rt3883_pci_write_u32(0, 0x01, 0, PCI_COMMAND, val); - - /* PCI */ - val = rt3883_pci_read_u32(0, 0x00, 0, PCI_COMMAND); - val |= 0x7; - rt3883_pci_write_u32(0, 0x00, 0, PCI_COMMAND, val); - - ioport_resource.start = rt3883_pci_io_resource.start; - ioport_resource.end = rt3883_pci_io_resource.end; - - register_pci_controller(&rt3883_pci_controller); -} - -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - int irq = -1; - - switch (dev->bus->number) { - case 0: - switch (PCI_SLOT(dev->devfn)) { - case 0x00: - rt3883_pci_wr(0x03ff0001, - RT3883_PCI_REG_BAR0SETUP_ADDR(0)); - rt3883_pci_wr(0x03ff0001, - RT3883_PCI_REG_BAR0SETUP_ADDR(1)); - - rt3883_pci_write_u32(0, 0x00, 0, PCI_BASE_ADDRESS_0, - RT3883_MEMORY_BASE); - rt3883_pci_read_u32(0, 0x00, 0, PCI_BASE_ADDRESS_0); - - irq = RT3883_CPU_IRQ_PCI; - break; - case 0x01: - rt3883_pci_write_u32(0, 0x01, 0, PCI_IO_BASE, - 0x00000101); - break; - case 0x11: - irq = RT3883_PCI_IRQ_PCI0; - break; - case 0x12: - irq = RT3883_PCI_IRQ_PCI1; - break; - } - break; - - case 1: - irq = RT3883_PCI_IRQ_PCIE; - break; - - default: - dev_err(&dev->dev, "no IRQ specified\n"); - return irq; - } - - return irq; -} - -void __init rt3883_pci_set_plat_dev_init(int (*f)(struct pci_dev *dev)) -{ - rt3883_pci_plat_dev_init = f; -} - -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - if (rt3883_pci_plat_dev_init) - return rt3883_pci_plat_dev_init(dev); - - return 0; -} diff --git a/target/linux/ramips/files/arch/mips/ralink/Kconfig b/target/linux/ramips/files/arch/mips/ralink/Kconfig deleted file mode 100644 index 74bca6d0e9..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/Kconfig +++ /dev/null @@ -1,83 +0,0 @@ -if MIPS_RALINK - -choice - prompt "Ralink SoC selection" - default SOC_RT288X - help - Select Ralink MIPS SoC type. - - config RALINK_RT288X - bool "RT288x" - select SOC_RT288X - - config RALINK_RT305X - bool "RT305x" - select SOC_RT305X - - config RALINK_RT3883 - bool "RT3883" - select SOC_RT3883 - -endchoice - -source "arch/mips/ralink/rt288x/Kconfig" -source "arch/mips/ralink/rt305x/Kconfig" -source "arch/mips/ralink/rt3883/Kconfig" - -config SOC_RT288X - bool - select CEVT_R4K - select CSRC_R4K - select DMA_NONCOHERENT - select IRQ_CPU - select ARCH_REQUIRE_GPIOLIB - select SYS_HAS_CPU_MIPS32_R1 - select SYS_HAS_CPU_MIPS32_R2 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_HAS_EARLY_PRINTK - select MIPS_MACHINE - select HAVE_CLK - -config SOC_RT305X - bool - select CEVT_R4K - select CSRC_R4K - select DMA_NONCOHERENT - select IRQ_CPU - select ARCH_REQUIRE_GPIOLIB - select SYS_HAS_CPU_MIPS32_R1 - select SYS_HAS_CPU_MIPS32_R2 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_HAS_EARLY_PRINTK - select MIPS_MACHINE - select USB_ARCH_HAS_HCD - select USB_ARCH_HAS_OHCI - select USB_ARCH_HAS_EHCI - select HAVE_CLK - -config SOC_RT3883 - bool - select CEVT_R4K - select CSRC_R4K - select DMA_NONCOHERENT - select IRQ_CPU - select ARCH_REQUIRE_GPIOLIB - select SYS_HAS_CPU_MIPS32_R1 - select SYS_HAS_CPU_MIPS32_R2 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_HAS_EARLY_PRINTK - select MIPS_MACHINE - select USB_ARCH_HAS_OHCI - select USB_ARCH_HAS_EHCI - select HAVE_CLK - -config RALINK_DEV_GPIO_BUTTONS - def_bool n - -config RALINK_DEV_GPIO_LEDS - def_bool n - -endif diff --git a/target/linux/ramips/files/arch/mips/ralink/Platform b/target/linux/ramips/files/arch/mips/ralink/Platform deleted file mode 100644 index 1b540492c2..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/Platform +++ /dev/null @@ -1,26 +0,0 @@ -# -# Ralink SoC common stuff -# -core-$(CONFIG_MIPS_RALINK) += arch/mips/ralink/common/ -cflags-$(CONFIG_MIPS_RALINK) += -I$(srctree)/arch/mips/include/asm/mach-ralink - -# -# Ralink RT288x -# -core-$(CONFIG_RALINK_RT288X) += arch/mips/ralink/rt288x/ -cflags-$(CONFIG_RALINK_RT288X) += -I$(srctree)//arch/mips/include/asm/mach-ralink/rt288x -load-$(CONFIG_RALINK_RT288X) += 0xffffffff88000000 - -# -# Ralink RT305x -# -core-$(CONFIG_RALINK_RT305X) += arch/mips/ralink/rt305x/ -cflags-$(CONFIG_RALINK_RT305X) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt305x -load-$(CONFIG_RALINK_RT305X) += 0xffffffff80000000 - -# -# Ralink RT3883 -# -core-$(CONFIG_RALINK_RT3883) += arch/mips/ralink/rt3883/ -cflags-$(CONFIG_RALINK_RT3883) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt3883 -load-$(CONFIG_RALINK_RT3883) += 0xffffffff80000000 diff --git a/target/linux/ramips/files/arch/mips/ralink/common/Makefile b/target/linux/ramips/files/arch/mips/ralink/common/Makefile deleted file mode 100644 index adab85f689..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/common/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# Makefile for the Ralink common stuff -# -# Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> -# -# This program is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License version 2 as published -# by the Free Software Foundation. - -obj-y := prom.o setup.o intc.o gpio.o - -obj-$(CONFIG_RALINK_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o -obj-$(CONFIG_RALINK_DEV_GPIO_LEDS) += dev-gpio-leds.o diff --git a/target/linux/ramips/files/arch/mips/ralink/common/dev-gpio-buttons.c b/target/linux/ramips/files/arch/mips/ralink/common/dev-gpio-buttons.c deleted file mode 100644 index 75a2a17143..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/common/dev-gpio-buttons.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Ralink SoC GPIO button support - * - * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include "linux/init.h" -#include <linux/platform_device.h> -#include <linux/slab.h> - -#include <asm/mach-ralink/dev-gpio-buttons.h> - -void __init ramips_register_gpio_buttons(int id, - unsigned poll_interval, - unsigned nbuttons, - struct gpio_keys_button *buttons) -{ - struct platform_device *pdev; - struct gpio_keys_platform_data pdata; - struct gpio_keys_button *p; - int err; - - p = kmalloc(nbuttons * sizeof(*p), GFP_KERNEL); - if (!p) - return; - - memcpy(p, buttons, nbuttons * sizeof(*p)); - - pdev = platform_device_alloc("gpio-keys-polled", id); - if (!pdev) - goto err_free_buttons; - - memset(&pdata, 0, sizeof(pdata)); - pdata.poll_interval = poll_interval; - pdata.nbuttons = nbuttons; - pdata.buttons = p; - - err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); - if (err) - goto err_put_pdev; - - err = platform_device_add(pdev); - if (err) - goto err_put_pdev; - - return; - -err_put_pdev: - platform_device_put(pdev); - -err_free_buttons: - kfree(p); -} diff --git a/target/linux/ramips/files/arch/mips/ralink/common/dev-gpio-leds.c b/target/linux/ramips/files/arch/mips/ralink/common/dev-gpio-leds.c deleted file mode 100644 index a45a7cb779..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/common/dev-gpio-leds.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Ralink SoC GPIO LED device support - * - * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/slab.h> - -#include <asm/mach-ralink/dev-gpio-leds.h> - -void __init ramips_register_gpio_leds(int id, unsigned num_leds, - struct gpio_led *leds) -{ - struct platform_device *pdev; - struct gpio_led_platform_data pdata; - struct gpio_led *p; - int err; - - p = kmalloc(num_leds * sizeof(*p), GFP_KERNEL); - if (!p) - return; - - memcpy(p, leds, num_leds * sizeof(*p)); - - pdev = platform_device_alloc("leds-gpio", id); - if (!pdev) - goto err_free_leds; - - memset(&pdata, 0, sizeof(pdata)); - pdata.num_leds = num_leds; - pdata.leds = p; - - err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); - if (err) - goto err_put_pdev; - - err = platform_device_add(pdev); - if (err) - goto err_put_pdev; - - return; - -err_put_pdev: - platform_device_put(pdev); - -err_free_leds: - kfree(p); -} diff --git a/target/linux/ramips/files/arch/mips/ralink/common/gpio.c b/target/linux/ramips/files/arch/mips/ralink/common/gpio.c deleted file mode 100644 index f03d145b6d..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/common/gpio.c +++ /dev/null @@ -1,113 +0,0 @@ -/* - * Ralink SoC specific GPIO support - * - * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/io.h> - -#include <asm/mach-ralink/ramips_gpio.h> - -static inline struct ramips_gpio_chip *to_ramips_gpio(struct gpio_chip *chip) -{ - struct ramips_gpio_chip *rg; - - rg = container_of(chip, struct ramips_gpio_chip, chip); - return rg; -} - -static inline void ramips_gpio_wr(struct ramips_gpio_chip *rg, u8 reg, u32 val) -{ - __raw_writel(val, rg->regs_base + rg->regs[reg]); -} - -static inline u32 ramips_gpio_rr(struct ramips_gpio_chip *rg, u8 reg) -{ - return __raw_readl(rg->regs_base + rg->regs[reg]); -} - -static int ramips_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - struct ramips_gpio_chip *rg = to_ramips_gpio(chip); - unsigned long flags; - u32 t; - - spin_lock_irqsave(&rg->lock, flags); - t = ramips_gpio_rr(rg, RAMIPS_GPIO_REG_DIR); - t &= ~(1 << offset); - ramips_gpio_wr(rg, RAMIPS_GPIO_REG_DIR, t); - spin_unlock_irqrestore(&rg->lock, flags); - - return 0; -} - -static int ramips_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct ramips_gpio_chip *rg = to_ramips_gpio(chip); - unsigned long flags; - u32 reg; - u32 t; - - reg = (value) ? RAMIPS_GPIO_REG_SET : RAMIPS_GPIO_REG_RESET; - - spin_lock_irqsave(&rg->lock, flags); - ramips_gpio_wr(rg, reg, 1 << offset); - - t = ramips_gpio_rr(rg, RAMIPS_GPIO_REG_DIR); - t |= 1 << offset; - ramips_gpio_wr(rg, RAMIPS_GPIO_REG_DIR, t); - spin_unlock_irqrestore(&rg->lock, flags); - - return 0; -} - -static void ramips_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct ramips_gpio_chip *rg = to_ramips_gpio(chip); - u32 reg; - - reg = (value) ? RAMIPS_GPIO_REG_SET : RAMIPS_GPIO_REG_RESET; - ramips_gpio_wr(rg, reg, 1 << offset); -} - -static int ramips_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct ramips_gpio_chip *rg = to_ramips_gpio(chip); - u32 t; - - t = ramips_gpio_rr(rg, RAMIPS_GPIO_REG_DATA); - return !!(t & (1 << offset)); -} - -static __init void ramips_gpio_chip_add(struct ramips_gpio_chip *rg) -{ - spin_lock_init(&rg->lock); - - rg->regs_base = ioremap(rg->map_base, rg->map_size); - - rg->chip.direction_input = ramips_gpio_direction_input; - rg->chip.direction_output = ramips_gpio_direction_output; - rg->chip.get = ramips_gpio_get; - rg->chip.set = ramips_gpio_set; - - /* set polarity to low for all lines */ - ramips_gpio_wr(rg, RAMIPS_GPIO_REG_POL, 0); - - gpiochip_add(&rg->chip); -} - -__init int ramips_gpio_init(struct ramips_gpio_data *data) -{ - int i; - - for (i = 0; i < data->num_chips; i++) - ramips_gpio_chip_add(&data->chips[i]); - - return 0; -} diff --git a/target/linux/ramips/files/arch/mips/ralink/common/intc.c b/target/linux/ramips/files/arch/mips/ralink/common/intc.c deleted file mode 100644 index 65e42b423b..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/common/intc.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Ralink SoC Interrupt controller routines - * - * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/bitops.h> - -#include <asm/irq_cpu.h> -#include <asm/mipsregs.h> - -#include <asm/mach-ralink/common.h> - -/* INTC register offsets */ -#define INTC_REG_STATUS0 0x00 -#define INTC_REG_STATUS1 0x04 -#define INTC_REG_TYPE 0x20 -#define INTC_REG_RAW_STATUS 0x30 -#define INTC_REG_ENABLE 0x34 -#define INTC_REG_DISABLE 0x38 - -#define INTC_INT_GLOBAL BIT(31) -#define INTC_IRQ_COUNT 32 - -static unsigned int ramips_intc_irq_base; -static void __iomem *ramips_intc_base; - -static inline void ramips_intc_wr(u32 val, unsigned reg) -{ - __raw_writel(val, ramips_intc_base + reg); -} - -static inline u32 ramips_intc_rr(unsigned reg) -{ - return __raw_readl(ramips_intc_base + reg); -} - -static void ramips_intc_irq_unmask(struct irq_data *d) -{ - unsigned int irq = d->irq - ramips_intc_irq_base; - - ramips_intc_wr((1 << irq), INTC_REG_ENABLE); -} - -static void ramips_intc_irq_mask(struct irq_data *d) -{ - unsigned int irq = d->irq - ramips_intc_irq_base; - - ramips_intc_wr((1 << irq), INTC_REG_DISABLE); -} - -static struct irq_chip ramips_intc_irq_chip = { - .name = "INTC", - .irq_unmask = ramips_intc_irq_unmask, - .irq_mask = ramips_intc_irq_mask, - .irq_mask_ack = ramips_intc_irq_mask, -}; - -static struct irqaction ramips_intc_irqaction = { - .handler = no_action, - .name = "cascade [INTC]", -}; - -void __init ramips_intc_irq_init(unsigned intc_base, unsigned irq, - unsigned irq_base) -{ - int i; - - ramips_intc_base = ioremap_nocache(intc_base, PAGE_SIZE); - ramips_intc_irq_base = irq_base; - - /* disable all interrupts */ - ramips_intc_wr(~0, INTC_REG_DISABLE); - - /* route all INTC interrupts to MIPS HW0 interrupt */ - ramips_intc_wr(0, INTC_REG_TYPE); - - for (i = ramips_intc_irq_base; - i < ramips_intc_irq_base + INTC_IRQ_COUNT; i++) - irq_set_chip_and_handler(i, &ramips_intc_irq_chip, - handle_level_irq); - - setup_irq(irq, &ramips_intc_irqaction); - ramips_intc_wr(INTC_INT_GLOBAL, INTC_REG_ENABLE); -} - -u32 ramips_intc_get_status(void) -{ - return ramips_intc_rr(INTC_REG_STATUS0); -} diff --git a/target/linux/ramips/files/arch/mips/ralink/common/prom.c b/target/linux/ramips/files/arch/mips/ralink/common/prom.c deleted file mode 100644 index 26169d366d..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/common/prom.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - * Ralink SoC specific prom routines - * - * Copyright (C) 2010 Joonas Lahtinen <joonas.lahtinen@gmail.com> - * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/string.h> - -#include <asm/bootinfo.h> -#include <asm/addrspace.h> - -#include <asm/mach-ralink/common.h> -#include <asm/mach-ralink/machine.h> - -unsigned long ramips_mem_base; -unsigned long ramips_mem_size_min; -unsigned long ramips_mem_size_max; - -static inline void *to_ram_addr(void *addr) -{ - u32 base; - - base = KSEG0ADDR(ramips_mem_base); - if (((u32) addr > base) && - ((u32) addr < (base + ramips_mem_size_max))) - return addr; - - base = KSEG1ADDR(ramips_mem_base); - if (((u32) addr > base) && - ((u32) addr < (base + ramips_mem_size_max))) - return addr; - - /* some U-Boot variants uses physical addresses */ - base = ramips_mem_base; - if (((u32) addr > base) && - ((u32) addr < (base + ramips_mem_size_max))) - return (void *)KSEG0ADDR(addr); - - return NULL; -} - -static char ramips_cmdline_buf[COMMAND_LINE_SIZE] __initdata; -static void __init prom_append_cmdline(const char *name, - const char *value) -{ - snprintf(ramips_cmdline_buf, sizeof(ramips_cmdline_buf), - " %s=%s", name, value); - strlcat(arcs_cmdline, ramips_cmdline_buf, sizeof(arcs_cmdline)); -} - -#ifdef CONFIG_IMAGE_CMDLINE_HACK -extern char __image_cmdline[]; - -static int __init use_image_cmdline(void) -{ - char *p = __image_cmdline; - int replace = 0; - - if (*p == '-') { - replace = 1; - p++; - } - - if (*p == '\0') - return 0; - - if (replace) { - strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline)); - } else { - strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline)); - strlcat(arcs_cmdline, p, sizeof(arcs_cmdline)); - } - - return 1; -} -#else -static int inline use_image_cmdline(void) { return 0; } -#endif - -static __init void prom_init_cmdline(int argc, char **argv) -{ - int i; - - if (use_image_cmdline()) - return; - - if (!argv) { - printk(KERN_DEBUG "argv=%p is invalid, skipping\n", - argv); - return; - } - - for (i = 0; i < argc; i++) { - char *p = to_ram_addr(argv[i]); - - if (!p) { - printk(KERN_DEBUG - "argv[%d]=%p is invalid, skipping\n", - i, argv[i]); - continue; - } - - printk(KERN_DEBUG "argv[%d]: %s\n", i, p); - strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline)); - strlcat(arcs_cmdline, p, sizeof(arcs_cmdline)); - } -} - -static __init char *prom_append_env(char **env, const char *envname) -{ -#define PROM_MAX_ENVS 256 - int len = strlen(envname); - int i; - - if (!env) { - printk(KERN_DEBUG "env=%p is not in RAM, skipping\n", - env); - return NULL; - } - - for (i = 0; i < PROM_MAX_ENVS; i++) { - char *p = to_ram_addr(env[i]); - - if (!p) - break; - - printk(KERN_DEBUG "env[%d]: %s\n", i, p); - if (strncmp(envname, p, len) == 0 && p[len] == '=') - prom_append_cmdline(envname, p + len + 1); - } - - return NULL; -#undef PROM_MAX_ENVS -} - -void __init prom_init(void) -{ - int argc; - char **envp; - char **argv; - - ramips_soc_prom_init(); - - printk(KERN_DEBUG - "prom: fw_arg0=%08x, fw_arg1=%08x, fw_arg2=%08x, fw_arg3=%08x\n", - (unsigned int)fw_arg0, (unsigned int)fw_arg1, - (unsigned int)fw_arg2, (unsigned int)fw_arg3); - - argc = fw_arg0; - argv = to_ram_addr((void *)fw_arg1); - prom_init_cmdline(argc, argv); - - envp = to_ram_addr((void *)fw_arg2); - prom_append_env(envp, "board"); - prom_append_env(envp, "ethaddr"); -} - -void __init prom_free_prom_memory(void) -{ - /* We do not have to prom memory to free */ -} diff --git a/target/linux/ramips/files/arch/mips/ralink/common/setup.c b/target/linux/ramips/files/arch/mips/ralink/common/setup.c deleted file mode 100644 index 1af855e649..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/common/setup.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - * Ralink SoC common setup - * - * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/serial_8250.h> - -#include <asm/bootinfo.h> -#include <asm/addrspace.h> - -#include <asm/mach-ralink/common.h> -#include <asm/mach-ralink/machine.h> - -unsigned char ramips_sys_type[RAMIPS_SYS_TYPE_LEN]; -unsigned long (*ramips_get_mem_size)(void); - -const char *get_system_type(void) -{ - return ramips_sys_type; -} - -static void __init detect_mem_size(void) -{ - unsigned long size; - - if (ramips_get_mem_size) { - size = ramips_get_mem_size(); - } else { - void *base; - - base = (void *) KSEG1ADDR(detect_mem_size); - for (size = ramips_mem_size_min; size < ramips_mem_size_max; - size <<= 1 ) { - if (!memcmp(base, base + size, 1024)) - break; - } - } - - add_memory_region(ramips_mem_base, size, BOOT_MEM_RAM); -} - -void __init ramips_early_serial_setup(int line, unsigned base, unsigned freq, - unsigned irq) -{ - struct uart_port p; - int err; - - memset(&p, 0, sizeof(p)); - p.flags = UPF_SKIP_TEST | UPF_FIXED_TYPE; - p.iotype = UPIO_AU; - p.uartclk = freq; - p.regshift = 2; - p.type = PORT_16550A; - - p.mapbase = base; - p.membase = ioremap_nocache(p.mapbase, PAGE_SIZE); - p.line = line; - p.irq = irq; - - err = early_serial_setup(&p); - if (err) - printk(KERN_ERR "early serial%d registration failed %d\n", - line, err); -} - -void __init plat_mem_setup(void) -{ - set_io_port_base(KSEG1); - - detect_mem_size(); - ramips_soc_setup(); -} - -__setup("board=", mips_machtype_setup); - -static int __init ramips_machine_setup(void) -{ - mips_machine_setup(); - return 0; -} - -arch_initcall(ramips_machine_setup); - -static void __init ramips_generic_init(void) -{ -} - -MIPS_MACHINE(RAMIPS_MACH_GENERIC, "Generic", "Generic Ralink board", - ramips_generic_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig deleted file mode 100644 index 739561c640..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig +++ /dev/null @@ -1,36 +0,0 @@ -if RALINK_RT288X - -menu "Ralink RT288x machine selection" - -config RT288X_MACH_F5D8235_V1 - bool "Belkin F5D8235 V1 board support" - select RALINK_DEV_GPIO_LEDS - -config RT288X_MACH_BR6524N - bool "Edimax BR6524N support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT288X_MACH_RT_N15 - bool "Asus RT-N15 board support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT288X_MACH_V11ST_FE - bool "Ralink V11ST-FE board support" - select HW_HAS_PCI - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT288X_MACH_WLI_TX4_AG300N - bool "Buffalo WLI-TX4-AG300N board support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT288X_MACH_WZR_AGL300NH - bool "Buffalo WZR-AGL300NH board support" - select RALINK_DEV_GPIO_LEDS - -endmenu - -endif diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile deleted file mode 100644 index eb60c5d10d..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -# -# Makefile for the Ralink RT288x SoC specific parts of the kernel -# -# Copyright (C) 2010 Joonas Lahtinen <joonas.lahtinen@gmail.com> -# Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> -# Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> -# -# This program is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License version 2 as published -# by the Free Software Foundation. - -obj-y := irq.o setup.o rt288x.o devices.o clock.o - -obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - -obj-$(CONFIG_RT288X_MACH_F5D8235_V1) += mach-f5d8235-v1.o -obj-$(CONFIG_RT288X_MACH_BR6524N) += mach-br6524n.o -obj-$(CONFIG_RT288X_MACH_RT_N15) += mach-rt-n15.o -obj-$(CONFIG_RT288X_MACH_V11ST_FE) += mach-v11st-fe.o -obj-$(CONFIG_RT288X_MACH_WLI_TX4_AG300N) += mach-wli-tx4-ag300n.o -obj-$(CONFIG_RT288X_MACH_WZR_AGL300NH) += mach-wzr-agl300nh.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/clock.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/clock.c deleted file mode 100644 index 36d754dbf6..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/clock.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Ralink RT288X clock API - * - * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/clk.h> - -#include <asm/mach-ralink/common.h> -#include <asm/mach-ralink/rt288x.h> -#include <asm/mach-ralink/rt288x_regs.h> -#include "common.h" - -struct clk { - unsigned long rate; -}; - -static struct clk rt288x_cpu_clk; -static struct clk rt288x_sys_clk; -static struct clk rt288x_wdt_clk; -static struct clk rt288x_uart_clk; - -void __init rt288x_clocks_init(void) -{ - u32 t; - - t = rt288x_sysc_rr(SYSC_REG_SYSTEM_CONFIG); - t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK); - - switch (t) { - case SYSTEM_CONFIG_CPUCLK_250: - rt288x_cpu_clk.rate = 250000000; - break; - case SYSTEM_CONFIG_CPUCLK_266: - rt288x_cpu_clk.rate = 266666667; - break; - case SYSTEM_CONFIG_CPUCLK_280: - rt288x_cpu_clk.rate = 280000000; - break; - case SYSTEM_CONFIG_CPUCLK_300: - rt288x_cpu_clk.rate = 300000000; - break; - } - - rt288x_sys_clk.rate = rt288x_cpu_clk.rate / 2; - rt288x_uart_clk.rate = rt288x_sys_clk.rate; - rt288x_wdt_clk.rate = rt288x_sys_clk.rate; -} - -/* - * Linux clock API - */ -struct clk *clk_get(struct device *dev, const char *id) -{ - if (!strcmp(id, "sys")) - return &rt288x_sys_clk; - - if (!strcmp(id, "cpu")) - return &rt288x_cpu_clk; - - if (!strcmp(id, "wdt")) - return &rt288x_wdt_clk; - - if (!strcmp(id, "uart")) - return &rt288x_uart_clk; - - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get); - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/common.h b/target/linux/ramips/files/arch/mips/ralink/rt288x/common.h deleted file mode 100644 index f2415c58ba..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/common.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Ralink RT288X SoC common defines - * - * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _RT288X_COMMON_H -#define _RT288X_COMMON_H - -void rt288x_clocks_init(void); - -#endif /* _RT288X_COMMON_H */
\ No newline at end of file diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/devices.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/devices.c deleted file mode 100644 index 196810a30f..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/devices.c +++ /dev/null @@ -1,211 +0,0 @@ -/* - * Ralink RT288x SoC platform device registration - * - * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/physmap.h> -#include <linux/etherdevice.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/rt2x00_platform.h> - -#include <asm/addrspace.h> - -#include <asm/mach-ralink/rt288x.h> -#include <asm/mach-ralink/rt288x_regs.h> -#include <asm/mach-ralink/ramips_eth_platform.h> - -#include "devices.h" - -static struct resource rt288x_flash0_resources[] = { - { - .flags = IORESOURCE_MEM, - .start = KSEG1ADDR(RT2880_FLASH0_BASE), - .end = KSEG1ADDR(RT2880_FLASH0_BASE) + - RT2880_FLASH0_SIZE - 1, - }, -}; - -struct physmap_flash_data rt288x_flash0_data; -static struct platform_device rt288x_flash0_device = { - .name = "physmap-flash", - .resource = rt288x_flash0_resources, - .num_resources = ARRAY_SIZE(rt288x_flash0_resources), - .dev = { - .platform_data = &rt288x_flash0_data, - }, -}; - -static struct resource rt288x_flash1_resources[] = { - { - .flags = IORESOURCE_MEM, - .start = KSEG1ADDR(RT2880_FLASH1_BASE), - .end = KSEG1ADDR(RT2880_FLASH1_BASE) + - RT2880_FLASH1_SIZE - 1, - }, -}; - -struct physmap_flash_data rt288x_flash1_data; -static struct platform_device rt288x_flash1_device = { - .name = "physmap-flash", - .resource = rt288x_flash1_resources, - .num_resources = ARRAY_SIZE(rt288x_flash1_resources), - .dev = { - .platform_data = &rt288x_flash1_data, - }, -}; - -static int rt288x_flash_instance __initdata; -void __init rt288x_register_flash(unsigned int id) -{ - struct platform_device *pdev; - struct physmap_flash_data *pdata; - u32 t; - int reg; - - switch (id) { - case 0: - pdev = &rt288x_flash0_device; - reg = MEMC_REG_FLASH_CFG0; - break; - case 1: - pdev = &rt288x_flash1_device; - reg = MEMC_REG_FLASH_CFG1; - break; - default: - return; - } - - t = rt288x_memc_rr(reg); - t = (t >> FLASH_CFG_WIDTH_SHIFT) & FLASH_CFG_WIDTH_MASK; - - pdata = pdev->dev.platform_data; - switch (t) { - case FLASH_CFG_WIDTH_8BIT: - pdata->width = 1; - break; - case FLASH_CFG_WIDTH_16BIT: - pdata->width = 2; - break; - case FLASH_CFG_WIDTH_32BIT: - pdata->width = 4; - break; - default: - printk(KERN_ERR "RT288x: flash bank%u witdh is invalid\n", id); - return; - } - - pdev->id = rt288x_flash_instance; - - platform_device_register(pdev); - rt288x_flash_instance++; -} - -static struct resource rt288x_wifi_resources[] = { - { - .start = RT2880_WMAC_BASE, - .end = RT2880_WMAC_BASE + 0x3FFFF, - .flags = IORESOURCE_MEM, - }, { - .start = RT288X_CPU_IRQ_WNIC, - .end = RT288X_CPU_IRQ_WNIC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct rt2x00_platform_data rt288x_wifi_data; -static struct platform_device rt288x_wifi_device = { - .name = "rt2800_wmac", - .resource = rt288x_wifi_resources, - .num_resources = ARRAY_SIZE(rt288x_wifi_resources), - .dev = { - .platform_data = &rt288x_wifi_data, - } -}; - -void __init rt288x_register_wifi(void) -{ - rt288x_wifi_data.eeprom_file_name = "soc_wmac.eeprom"; - platform_device_register(&rt288x_wifi_device); -} - -static void rt288x_fe_reset(void) -{ - rt288x_sysc_wr(RT2880_RESET_FE, SYSC_REG_RESET_CTRL); -} - -static struct resource rt288x_eth_resources[] = { - { - .start = RT2880_FE_BASE, - .end = RT2880_FE_BASE + PAGE_SIZE - 1, - .flags = IORESOURCE_MEM, - }, { - .start = RT288X_CPU_IRQ_FE, - .end = RT288X_CPU_IRQ_FE, - .flags = IORESOURCE_IRQ, - }, -}; - -struct ramips_eth_platform_data rt288x_eth_data; -static struct platform_device rt288x_eth_device = { - .name = "ramips_eth", - .resource = rt288x_eth_resources, - .num_resources = ARRAY_SIZE(rt288x_eth_resources), - .dev = { - .platform_data = &rt288x_eth_data, - } -}; - -void __init rt288x_register_ethernet(void) -{ - struct clk *clk; - - clk = clk_get(NULL, "sys"); - if (IS_ERR(clk)) - panic("unable to get SYS clock, err=%ld", PTR_ERR(clk)); - - rt288x_eth_data.sys_freq = clk_get_rate(clk); - rt288x_eth_data.reset_fe = rt288x_fe_reset; - rt288x_eth_data.min_pkt_len = 64; - - if (!is_valid_ether_addr(rt288x_eth_data.mac)) - random_ether_addr(rt288x_eth_data.mac); - - platform_device_register(&rt288x_eth_device); -} - -static struct resource rt288x_wdt_resources[] = { - { - .start = RT2880_TIMER_BASE, - .end = RT2880_TIMER_BASE + RT2880_TIMER_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device rt288x_wdt_device = { - .name = "ramips-wdt", - .id = -1, - .resource = rt288x_wdt_resources, - .num_resources = ARRAY_SIZE(rt288x_wdt_resources), -}; - -void __init rt288x_register_wdt(void) -{ - u32 t; - - /* enable WDT reset output on pin SRAM_CS_N */ - t = rt288x_sysc_rr(SYSC_REG_CLKCFG); - t |= CLKCFG_SRAM_CS_N_WDT; - rt288x_sysc_wr(t, SYSC_REG_CLKCFG); - - platform_device_register(&rt288x_wdt_device); -} diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/devices.h b/target/linux/ramips/files/arch/mips/ralink/rt288x/devices.h deleted file mode 100644 index d097e5d90e..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/devices.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Ralink RT288x SoC specific platform definitions - * - * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef __ASM_MACH_RT288X_PLATFORM_H -#define __ASM_MACH_RT288X_PLATFORM_H - -struct physmap_flash_data; - -extern struct physmap_flash_data rt288x_flash0_data; -extern struct physmap_flash_data rt288x_flash1_data; -void rt288x_register_flash(unsigned int id); - -void rt288x_register_wifi(void); - -extern struct ramips_eth_platform_data rt288x_eth_data; -void rt288x_register_ethernet(void); - -void rt288x_register_wdt(void); - -#endif /* __ASM_MACH_RT288X_PLATFORM_H */ diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/early_printk.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/early_printk.c deleted file mode 100644 index 9fd7adb543..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/early_printk.c +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Ralink RT288x SoC early printk support - * - * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/io.h> -#include <linux/serial_reg.h> - -#include <asm/addrspace.h> - -#include <asm/mach-ralink/rt288x_regs.h> - -#define UART_READ(r) \ - __raw_readl((void __iomem *)(KSEG1ADDR(RT2880_UART1_BASE) + 4 * (r))) - -#define UART_WRITE(r, v) \ - __raw_writel((v), (void __iomem *)(KSEG1ADDR(RT2880_UART1_BASE) + 4 * (r))) - -void prom_putchar(unsigned char ch) -{ - while (((UART_READ(UART_REG_LSR)) & UART_LSR_THRE) == 0); - UART_WRITE(UART_REG_TX, ch); - while (((UART_READ(UART_REG_LSR)) & UART_LSR_THRE) == 0); -} diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/irq.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/irq.c deleted file mode 100644 index 5465a4560d..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/irq.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Ralink RT288x SoC specific interrupt handling - * - * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> - -#include <asm/irq_cpu.h> -#include <asm/mipsregs.h> - -#include <asm/mach-ralink/common.h> -#include <asm/mach-ralink/rt288x.h> -#include <asm/mach-ralink/rt288x_regs.h> - -static void rt288x_intc_irq_dispatch(void) -{ - u32 pending; - - pending = ramips_intc_get_status(); - - if (pending & RT2880_INTC_INT_TIMER0) - do_IRQ(RT2880_INTC_IRQ_TIMER0); - - else if (pending & RT2880_INTC_INT_TIMER1) - do_IRQ(RT2880_INTC_IRQ_TIMER1); - - else if (pending & RT2880_INTC_INT_UART0) - do_IRQ(RT2880_INTC_IRQ_UART0); - - else if (pending & RT2880_INTC_INT_PCM) - do_IRQ(RT2880_INTC_IRQ_PCM); - - else if (pending & RT2880_INTC_INT_UART1) - do_IRQ(RT2880_INTC_IRQ_UART1); - - /* TODO: handle PIO interrupts as well */ - - else - spurious_interrupt(); -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned long pending; - - pending = read_c0_status() & read_c0_cause() & ST0_IM; - - if (pending & STATUSF_IP7) - do_IRQ(RT288X_CPU_IRQ_COUNTER); - - else if (pending & STATUSF_IP4) - do_IRQ(RT288X_CPU_IRQ_PCI); - - else if (pending & STATUSF_IP5) - do_IRQ(RT288X_CPU_IRQ_FE); - - else if (pending & STATUSF_IP6) - do_IRQ(RT288X_CPU_IRQ_WNIC); - - else if (pending & STATUSF_IP2) - rt288x_intc_irq_dispatch(); - - else - spurious_interrupt(); -} - -void __init arch_init_irq(void) -{ - mips_cpu_irq_init(); - ramips_intc_irq_init(RT2880_INTC_BASE, RT288X_CPU_IRQ_INTC, - RT288X_INTC_IRQ_BASE); -} diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-br6524n.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-br6524n.c deleted file mode 100644 index ff4746cda5..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-br6524n.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * Edimax BR6524N board support - * - * Copyright (C) 2012 Florian Fainelli <florian@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ethtool.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt288x.h> -#include <asm/mach-ralink/rt288x_regs.h> -#include <asm/mach-ralink/ramips_eth_platform.h> - -#include "devices.h" - -#define BR6524N_GPIO_STATUS_LED 12 -#define BR6524N_GPIO_BUTTON_WPS 0 - -#define BR6524N_KEYS_POLL_INTERVAL 20 -#define BR6524N_KEYS_DEBOUNCE_INTERVAL (3 * BR6524N_KEYS_POLL_INTERVAL) - -static struct gpio_led br6524n_leds_gpio[] __initdata = { - { - .name = "br6524n:green:status", - .gpio = BR6524N_GPIO_STATUS_LED, - .active_low = 1, - } -}; - -static struct gpio_keys_button br6524n_gpio_buttons[] __initdata = { - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = BR6524N_KEYS_DEBOUNCE_INTERVAL, - .gpio = BR6524N_GPIO_BUTTON_WPS, - } -}; - -static void __init br6524n_fe_init(void) -{ - rt288x_gpio_init(RT2880_GPIO_MODE_UART0); - - rt288x_register_flash(0); - - ramips_register_gpio_leds(-1, ARRAY_SIZE(br6524n_leds_gpio), - br6524n_leds_gpio); - - ramips_register_gpio_buttons(-1, BR6524N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(br6524n_gpio_buttons), - br6524n_gpio_buttons); - - rt288x_register_wifi(); - - /* Board is connected to an IC+ IP175C Fast Ethernet switch */ - rt288x_eth_data.speed = SPEED_100; - rt288x_eth_data.duplex = DUPLEX_FULL; - rt288x_eth_data.tx_fc = 1; - rt288x_eth_data.rx_fc = 1; - rt288x_eth_data.phy_mask = BIT(0); - rt288x_register_ethernet(); - - rt288x_register_wdt(); -} - -MIPS_MACHINE(RAMIPS_MACH_BR6524N, "BR6524N", "Edimax BR6524N", br6524n_fe_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-f5d8235-v1.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-f5d8235-v1.c deleted file mode 100644 index 7679572bb5..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-f5d8235-v1.c +++ /dev/null @@ -1,106 +0,0 @@ -/* - * Belkin F5D825 V1 board support - * - * Copyright (C) 2011 Cezary Jackiewicz <cezary.jackiewicz@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt288x.h> -#include <asm/mach-ralink/rt288x_regs.h> - -#include "devices.h" - -#include <linux/rtl8366.h> -#include <linux/ethtool.h> - -#include <asm/mach-ralink/ramips_eth_platform.h> - -#define F5D8235_GPIO_RTL8366_SCK 2 -#define F5D8235_GPIO_RTL8366_SDA 1 - -#define F5D8235_GPIO_LED_USB_BLUE 7 -#define F5D8235_GPIO_LED_USB_ORANGE 8 -#define F5D8235_GPIO_BUTTON_WPS 0 -#define F5D8235_GPIO_BUTTON_RESET 9 - -#define F5D8235_KEYS_POLL_INTERVAL 20 -#define F5D8235_KEYS_DEBOUNCE_INTERVAL (3 * F5D8235_KEYS_POLL_INTERVAL) - -static struct rtl8366_platform_data f5d8235_rtl8366s_data = { - .gpio_sda = F5D8235_GPIO_RTL8366_SDA, - .gpio_sck = F5D8235_GPIO_RTL8366_SCK, -}; - -static struct platform_device f5d8235_rtl8366s_device = { - .name = RTL8366S_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &f5d8235_rtl8366s_data, - } -}; - -static struct gpio_led f5d8235_leds_gpio[] __initdata = { - { - .name = "f5d8235-v1:blue:storage", - .gpio = F5D8235_GPIO_LED_USB_BLUE, - .active_low = 1, - },{ - .name = "f5d8235-v1:orange:storage", - .gpio = F5D8235_GPIO_LED_USB_ORANGE, - .active_low = 1, - } -}; - -static struct gpio_keys_button f5d8235_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = F5D8235_KEYS_DEBOUNCE_INTERVAL, - .gpio = F5D8235_GPIO_BUTTON_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = F5D8235_KEYS_DEBOUNCE_INTERVAL, - .gpio = F5D8235_GPIO_BUTTON_WPS, - .active_low = 1, - } -}; - -static void __init f5d8235_init(void) -{ - rt288x_gpio_init(RT2880_GPIO_MODE_UART0 | RT2880_GPIO_MODE_I2C); - - rt288x_register_flash(0); - rt288x_register_wifi(); - rt288x_register_wdt(); - - ramips_register_gpio_leds(-1, ARRAY_SIZE(f5d8235_leds_gpio), - f5d8235_leds_gpio); - - ramips_register_gpio_buttons(-1, F5D8235_KEYS_POLL_INTERVAL, - ARRAY_SIZE(f5d8235_gpio_buttons), - f5d8235_gpio_buttons); - - platform_device_register(&f5d8235_rtl8366s_device); - - rt288x_eth_data.speed = SPEED_1000; - rt288x_eth_data.duplex = DUPLEX_FULL; - rt288x_eth_data.tx_fc = 1; - rt288x_eth_data.rx_fc = 1; - rt288x_register_ethernet(); -} - -MIPS_MACHINE(RAMIPS_MACH_F5D8235_V1, "F5D8235_V1", - "Belkin F5D8235 v1", f5d8235_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-rt-n15.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-rt-n15.c deleted file mode 100644 index 1085b82f91..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-rt-n15.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Asus RT-N15 board support - * - * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/rtl8366.h> -#include <linux/ethtool.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt288x.h> -#include <asm/mach-ralink/rt288x_regs.h> -#include <asm/mach-ralink/ramips_eth_platform.h> - -#include "devices.h" - -#define RT_N15_GPIO_LED_POWER 11 -#define RT_N15_GPIO_BUTTON_WPS 0 -#define RT_N15_GPIO_BUTTON_RESET 12 - -#define RT_N15_GPIO_RTL8366_SCK 2 -#define RT_N15_GPIO_RTL8366_SDA 1 - -#define RT_N15_KEYS_POLL_INTERVAL 20 -#define RT_N15_KEYS_DEBOUNCE_INTERVAL (3 * RT_N15_KEYS_POLL_INTERVAL) - -static struct gpio_led rt_n15_leds_gpio[] __initdata = { - { - .name = "rt-n15:blue:power", - .gpio = RT_N15_GPIO_LED_POWER, - .active_low = 1, - } -}; - -static struct gpio_keys_button rt_n15_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = RT_N15_KEYS_DEBOUNCE_INTERVAL, - .gpio = RT_N15_GPIO_BUTTON_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = RT_N15_KEYS_DEBOUNCE_INTERVAL, - .gpio = RT_N15_GPIO_BUTTON_WPS, - .active_low = 1, - } -}; - -static struct rtl8366_platform_data rt_n15_rtl8366s_data = { - .gpio_sda = RT_N15_GPIO_RTL8366_SDA, - .gpio_sck = RT_N15_GPIO_RTL8366_SCK, -}; - -static struct platform_device rt_n15_rtl8366s_device = { - .name = RTL8366S_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &rt_n15_rtl8366s_data, - } -}; - -static void __init rt_n15_init(void) -{ - rt288x_gpio_init(RT2880_GPIO_MODE_UART0 | RT2880_GPIO_MODE_I2C); - - rt288x_register_flash(0); - - ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n15_leds_gpio), - rt_n15_leds_gpio); - - ramips_register_gpio_buttons(-1, RT_N15_KEYS_POLL_INTERVAL, - ARRAY_SIZE(rt_n15_gpio_buttons), - rt_n15_gpio_buttons); - - platform_device_register(&rt_n15_rtl8366s_device); - - rt288x_register_wifi(); - - rt288x_eth_data.speed = SPEED_1000; - rt288x_eth_data.duplex = DUPLEX_FULL; - rt288x_eth_data.tx_fc = 1; - rt288x_eth_data.rx_fc = 1; - rt288x_register_ethernet(); - rt288x_register_wdt(); -} - -MIPS_MACHINE(RAMIPS_MACH_RT_N15, "RT-N15", "Asus RT-N15", rt_n15_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-v11st-fe.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-v11st-fe.c deleted file mode 100644 index 667fe92dc0..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-v11st-fe.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * Ralink V11ST-FE board support - * - * Copyright (C) 2012 Florian Fainelli <florian@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ethtool.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt288x.h> -#include <asm/mach-ralink/rt288x_regs.h> -#include <asm/mach-ralink/ramips_eth_platform.h> - -#include "devices.h" - -#define V11ST_FE_GPIO_STATUS_LED 12 -#define V11ST_FE_GPIO_BUTTON_WPS 0 - -#define V11ST_FE_KEYS_POLL_INTERVAL 20 -#define V11ST_FE_KEYS_DEBOUNCE_INTERVAL (3 * V11ST_FE_KEYS_POLL_INTERVAL) - -static struct gpio_led v11st_fe_leds_gpio[] __initdata = { - { - .name = "v11st-fe:green:status", - .gpio = V11ST_FE_GPIO_STATUS_LED, - .active_low = 1, - } -}; - -static struct gpio_keys_button v11st_fe_gpio_buttons[] __initdata = { - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = V11ST_FE_KEYS_DEBOUNCE_INTERVAL, - .gpio = V11ST_FE_GPIO_BUTTON_WPS, - } -}; - -static void __init rt_v11st_fe_init(void) -{ - rt288x_gpio_init(RT2880_GPIO_MODE_UART0); - - rt288x_register_flash(0); - - ramips_register_gpio_leds(-1, ARRAY_SIZE(v11st_fe_leds_gpio), - v11st_fe_leds_gpio); - - ramips_register_gpio_buttons(-1, V11ST_FE_KEYS_POLL_INTERVAL, - ARRAY_SIZE(v11st_fe_gpio_buttons), - v11st_fe_gpio_buttons); - - rt288x_register_wifi(); - - /* Board is connected to an IC+ IP175C Fast Ethernet switch */ - rt288x_eth_data.speed = SPEED_100; - rt288x_eth_data.duplex = DUPLEX_FULL; - rt288x_eth_data.tx_fc = 1; - rt288x_eth_data.rx_fc = 1; - rt288x_eth_data.phy_mask = BIT(0); - rt288x_register_ethernet(); - - rt288x_register_wdt(); - rt288x_register_pci(); -} - -MIPS_MACHINE(RAMIPS_MACH_V11ST_FE, "V11ST-FE", "Ralink V11ST-FE", rt_v11st_fe_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-wli-tx4-ag300n.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-wli-tx4-ag300n.c deleted file mode 100644 index 02fac0b3c5..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-wli-tx4-ag300n.c +++ /dev/null @@ -1,102 +0,0 @@ -/* - * Buffalo WLI-TX4-AG300N board support - * - * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/ethtool.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt288x.h> -#include <asm/mach-ralink/rt288x_regs.h> -#include <asm/mach-ralink/ramips_eth_platform.h> - -#include "devices.h" - -#define WLI_TX4_AG300N_GPIO_LED_DIAG 10 -#define WLI_TX4_AG300N_GPIO_LED_POWER 12 -#define WLI_TX4_AG300N_GPIO_LED_SECURITY 13 - -#define WLI_TX4_AG300N_GPIO_BUTTON_AOSS 0 -#define WLI_TX4_AG300N_GPIO_BUTTON_BW_SWITCH 8 -#define WLI_TX4_AG300N_GPIO_BUTTON_RESET 9 - -#define WLI_TX4_AG300N_KEYS_POLL_INTERVAL 20 -#define WLI_TX4_AG300N_KEYS_DEBOUNCE_INTERVAL (3 * WLI_TX4_AG300N_KEYS_POLL_INTERVAL) - -static struct gpio_led wli_tx4_ag300n_leds_gpio[] __initdata = { - { - .name = "buffalo:blue:power", - .gpio = WLI_TX4_AG300N_GPIO_LED_POWER, - .active_low = 1, - }, - { - .name = "buffalo:red:diag", - .gpio = WLI_TX4_AG300N_GPIO_LED_DIAG, - .active_low = 1, - }, - { - .name = "buffalo:blue:security", - .gpio = WLI_TX4_AG300N_GPIO_LED_SECURITY, - .active_low = 0, - }, -}; - -static struct gpio_keys_button wli_tx4_ag300n_gpio_buttons[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WLI_TX4_AG300N_KEYS_DEBOUNCE_INTERVAL, - .gpio = WLI_TX4_AG300N_GPIO_BUTTON_RESET, - .active_low = 1, - }, - { - .desc = "AOSS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WLI_TX4_AG300N_KEYS_DEBOUNCE_INTERVAL, - .gpio = WLI_TX4_AG300N_GPIO_BUTTON_AOSS, - .active_low = 1, - }, - { - .desc = "Bandwidth switch", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = WLI_TX4_AG300N_KEYS_DEBOUNCE_INTERVAL, - .gpio = WLI_TX4_AG300N_GPIO_BUTTON_BW_SWITCH, - .active_low = 0, - }, -}; - -static void __init wli_tx4_ag300n_init(void) -{ - rt288x_gpio_init(RT2880_GPIO_MODE_UART0); - - ramips_register_gpio_leds(-1, ARRAY_SIZE(wli_tx4_ag300n_leds_gpio), - wli_tx4_ag300n_leds_gpio); - ramips_register_gpio_buttons(-1, WLI_TX4_AG300N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wli_tx4_ag300n_gpio_buttons), - wli_tx4_ag300n_gpio_buttons); - - rt288x_register_flash(0); - rt288x_register_wifi(); - rt288x_register_wdt(); - - rt288x_eth_data.speed = SPEED_100; - rt288x_eth_data.duplex = DUPLEX_FULL; - rt288x_eth_data.tx_fc = 1; - rt288x_eth_data.rx_fc = 1; - rt288x_register_ethernet(); -} - -MIPS_MACHINE(RAMIPS_MACH_WLI_TX4_AG300N, "WLI-TX4-AG300N", - "Buffalo WLI-TX4-AG300N", wli_tx4_ag300n_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-wzr-agl300nh.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-wzr-agl300nh.c deleted file mode 100644 index 6bd7a45423..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-wzr-agl300nh.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Buffalo WZR-AGL300NH board support - * - * Copyright (C) 2010 Joonas Lahtinen <joonas.lahtinen@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/rt288x.h> -#include <asm/mach-ralink/rt288x_regs.h> - -#include "devices.h" - -/* - * MTD layout from stock firmware: - * mtd0: 00030000 00010000 "uboot" - * mtd1: 00010000 00010000 "uboot_environ" - * mtd2: 00010000 00010000 "factory_default" - * mtd3: 000b0000 00010000 "linux" - * mtd4: 002f0000 00010000 "rootfs" - * mtd5: 00010000 00010000 "user_property" - */ - -static struct mtd_partition wzr_agl300nh_partitions[] = { - { - .name = "uboot", - .offset = 0, - .size = 0x030000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "uboot_environ", - .offset = 0x030000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "factory_default", - .offset = 0x040000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "linux", - .offset = 0x050000, - .size = 0x0b0000, - }, { - .name = "rootfs", - .offset = 0x100000, - .size = 0x2f0000, - }, { - .name = "user_property", - .offset = 0x3f0000, - .size = 0x010000, - } -}; - -static void __init wzr_agl300nh_init(void) -{ - rt288x_gpio_init(RT2880_GPIO_MODE_UART0); - - rt288x_flash0_data.nr_parts = ARRAY_SIZE(wzr_agl300nh_partitions); - rt288x_flash0_data.parts = wzr_agl300nh_partitions; - rt288x_register_flash(0); - - rt288x_register_wifi(); - rt288x_register_wdt(); -} - -MIPS_MACHINE(RAMIPS_MACH_WZR_AGL300NH, "WZR-AGL300NH", - "Buffalo WZR-AGL300NH", wzr_agl300nh_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/rt288x.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/rt288x.c deleted file mode 100644 index c51ad98b3a..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/rt288x.c +++ /dev/null @@ -1,153 +0,0 @@ -/* - * Ralink RT288x SoC specific setup - * - * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * Parts of this file are based on Ralink's 2.6.21 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> - -#include <asm/mach-ralink/common.h> -#include <asm/mach-ralink/ramips_gpio.h> -#include <asm/mach-ralink/rt288x.h> -#include <asm/mach-ralink/rt288x_regs.h> - -void __iomem * rt288x_sysc_base; -void __iomem * rt288x_memc_base; - -void __init ramips_soc_prom_init(void) -{ - void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT2880_SYSC_BASE); - u32 n0; - u32 n1; - u32 id; - - n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0); - n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1); - id = __raw_readl(sysc + SYSC_REG_CHIP_ID); - - snprintf(ramips_sys_type, RAMIPS_SYS_TYPE_LEN, - "Ralink %c%c%c%c%c%c%c%c id:%u rev:%u", - (char) (n0 & 0xff), (char) ((n0 >> 8) & 0xff), - (char) ((n0 >> 16) & 0xff), (char) ((n0 >> 24) & 0xff), - (char) (n1 & 0xff), (char) ((n1 >> 8) & 0xff), - (char) ((n1 >> 16) & 0xff), (char) ((n1 >> 24) & 0xff), - (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK, - (id & CHIP_ID_REV_MASK)); - - ramips_mem_base = RT2880_SDRAM_BASE; - ramips_mem_size_min = RT288X_MEM_SIZE_MIN; - ramips_mem_size_max = RT288X_MEM_SIZE_MAX; -} - -static struct ramips_gpio_chip rt288x_gpio_chips[] = { - { - .chip = { - .label = "RT288X-GPIO0", - .base = 0, - .ngpio = 24, - }, - .regs = { - [RAMIPS_GPIO_REG_INT] = 0x00, - [RAMIPS_GPIO_REG_EDGE] = 0x04, - [RAMIPS_GPIO_REG_RENA] = 0x08, - [RAMIPS_GPIO_REG_FENA] = 0x0c, - [RAMIPS_GPIO_REG_DATA] = 0x20, - [RAMIPS_GPIO_REG_DIR] = 0x24, - [RAMIPS_GPIO_REG_POL] = 0x28, - [RAMIPS_GPIO_REG_SET] = 0x2c, - [RAMIPS_GPIO_REG_RESET] = 0x30, - [RAMIPS_GPIO_REG_TOGGLE] = 0x34, - }, - .map_base = RT2880_PIO_BASE, - .map_size = RT2880_PIO_SIZE, - }, - { - .chip = { - .label = "RT288X-GPIO1", - .base = 24, - .ngpio = 16, - }, - .regs = { - [RAMIPS_GPIO_REG_INT] = 0x38, - [RAMIPS_GPIO_REG_EDGE] = 0x3c, - [RAMIPS_GPIO_REG_RENA] = 0x40, - [RAMIPS_GPIO_REG_FENA] = 0x44, - [RAMIPS_GPIO_REG_DATA] = 0x48, - [RAMIPS_GPIO_REG_DIR] = 0x4c, - [RAMIPS_GPIO_REG_POL] = 0x50, - [RAMIPS_GPIO_REG_SET] = 0x54, - [RAMIPS_GPIO_REG_RESET] = 0x58, - [RAMIPS_GPIO_REG_TOGGLE] = 0x5c, - }, - .map_base = RT2880_PIO_BASE, - .map_size = RT2880_PIO_SIZE, - }, - { - .chip = { - .label = "RT288X-GPIO2", - .base = 40, - .ngpio = 32, - }, - .regs = { - [RAMIPS_GPIO_REG_INT] = 0x60, - [RAMIPS_GPIO_REG_EDGE] = 0x64, - [RAMIPS_GPIO_REG_RENA] = 0x68, - [RAMIPS_GPIO_REG_FENA] = 0x6c, - [RAMIPS_GPIO_REG_DATA] = 0x70, - [RAMIPS_GPIO_REG_DIR] = 0x74, - [RAMIPS_GPIO_REG_POL] = 0x78, - [RAMIPS_GPIO_REG_SET] = 0x7c, - [RAMIPS_GPIO_REG_RESET] = 0x80, - [RAMIPS_GPIO_REG_TOGGLE] = 0x84, - }, - .map_base = RT2880_PIO_BASE, - .map_size = RT2880_PIO_SIZE, - }, -}; - -static struct ramips_gpio_data rt288x_gpio_data = { - .chips = rt288x_gpio_chips, - .num_chips = ARRAY_SIZE(rt288x_gpio_chips), -}; - -static void rt288x_gpio_reserve(int first, int last) -{ - for (; first <= last; first++) - gpio_request(first, "reserved"); -} - -void __init rt288x_gpio_init(u32 mode) -{ - rt288x_sysc_wr(mode, SYSC_REG_GPIO_MODE); - - ramips_gpio_init(&rt288x_gpio_data); - if ((mode & RT2880_GPIO_MODE_I2C) == 0) - rt288x_gpio_reserve(1, 2); - - if ((mode & RT2880_GPIO_MODE_SPI) == 0) - rt288x_gpio_reserve(3, 6); - - if ((mode & RT2880_GPIO_MODE_UART0) == 0) - rt288x_gpio_reserve(7, 14); - - if ((mode & RT2880_GPIO_MODE_JTAG) == 0) - rt288x_gpio_reserve(17, 21); - - if ((mode & RT2880_GPIO_MODE_MDIO) == 0) - rt288x_gpio_reserve(22, 23); - - if ((mode & RT2880_GPIO_MODE_SDRAM) == 0) - rt288x_gpio_reserve(24, 39); - - if ((mode & RT2880_GPIO_MODE_PCI) == 0) - rt288x_gpio_reserve(40, 71); -} diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/setup.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/setup.c deleted file mode 100644 index be474b5292..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/setup.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Ralink RT288x SoC specific setup - * - * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * Parts of this file are based on Ralink's 2.6.21 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/err.h> -#include <linux/clk.h> - -#include <asm/mips_machine.h> -#include <asm/reboot.h> -#include <asm/time.h> - -#include <asm/mach-ralink/common.h> -#include <asm/mach-ralink/rt288x.h> -#include <asm/mach-ralink/rt288x_regs.h> -#include "common.h" - -static void rt288x_restart(char *command) -{ - rt288x_sysc_wr(RT2880_RESET_SYSTEM, SYSC_REG_RESET_CTRL); - while (1) - if (cpu_wait) - cpu_wait(); -} - -static void rt288x_halt(void) -{ - while (1) - cpu_wait(); -} - -unsigned int __cpuinit get_c0_compare_irq(void) -{ - return CP0_LEGACY_COMPARE_IRQ; -} - -void __init ramips_soc_setup(void) -{ - struct clk *clk; - - rt288x_sysc_base = ioremap_nocache(RT2880_SYSC_BASE, RT2880_SYSC_SIZE); - rt288x_memc_base = ioremap_nocache(RT2880_MEMC_BASE, RT2880_MEMC_SIZE); - - rt288x_clocks_init(); - - clk = clk_get(NULL, "cpu"); - if (IS_ERR(clk)) - panic("unable to get CPU clock, err=%ld", PTR_ERR(clk)); - - printk(KERN_INFO "%s running at %lu.%02lu MHz\n", ramips_sys_type, - clk_get_rate(clk) / 1000000, - (clk_get_rate(clk) % 1000000) * 100 / 1000000); - - _machine_restart = rt288x_restart; - _machine_halt = rt288x_halt; - pm_power_off = rt288x_halt; - - clk = clk_get(NULL, "uart"); - if (IS_ERR(clk)) - panic("unable to get UART clock, err=%ld", PTR_ERR(clk)); - - ramips_early_serial_setup(0, RT2880_UART0_BASE, clk_get_rate(clk), - RT2880_INTC_IRQ_UART0); - ramips_early_serial_setup(1, RT2880_UART1_BASE, clk_get_rate(clk), - RT2880_INTC_IRQ_UART1); -} - -void __init plat_time_init(void) -{ - struct clk *clk; - - clk = clk_get(NULL, "cpu"); - if (IS_ERR(clk)) - panic("unable to get CPU clock, err=%ld", PTR_ERR(clk)); - - mips_hpt_frequency = clk_get_rate(clk) / 2; -} diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig deleted file mode 100644 index 700a983388..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig +++ /dev/null @@ -1,219 +0,0 @@ -if RALINK_RT305X - -menu "Ralink RT350x machine selection" - -config RT305X_MACH_CARAMBOLA - bool "8devices Carambola dev board support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_3G_6200N - bool "Edimax 3G-6200N board support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_3G300M - bool "Tenda 3G300M board support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_BR6425 - bool "Edimax BR-6425 board support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_WR6202 - bool "Accton WR6202" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_AIR3GII - bool "AirLive Air3GII board support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_ALL0256N - bool "Allnet ALL0256N support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_ALL5002 - bool "Allnet ALL5002 support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_W502U - bool "ALFA Networks W502U board support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_ARGUS_ATP52B - bool "Argus ATP-52B support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_RT_G32_REVB - bool "Asus RT-G32 revB board support" - select RALINK_DEV_GPIO_BUTTONS - -config RT305X_MACH_RT_N10_PLUS - bool "Asus RT-N10+ board support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_WL_330N - bool "Asus WL-330N board support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_WL_330N3G - bool "Asus WL-330N3G board support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_HW550_3G - bool "Aztech HW550-3G support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_F5D8235_V2 - bool "Belkin F5D8235 v2 support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_WHR_G300N - bool "Buffalo WHR-G300N support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_DIR_300_REVB - bool "D-Link DIR-300 revB board support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_DIR_615_H1 - bool "D-Link DIR-615 H1 board support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_DAP_1350 - bool "D-Link DAP-1350 board support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_ESR_9753 - bool "EnGenius ESR-9753 support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_BROADWAY - bool "Hauppauge Broadway support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_FONERA20N - bool "La Fonera20N board support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_RT_N13U - bool "ASUS RT-N13U board support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_FREESTATION5 - bool "ARC FreeStation5" - -config RT305X_MACH_MOFI3500_3GN - bool "MoFi Network MOFI3500-3GN support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_WR512_3GN - bool "SH-WR512NU/WS-WR512N1-like 3GN router" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_UR_326N4G - bool "UR-326N4G Wireless N router" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_UR_336UN - bool "UR-336UN Wireless N router" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_NW718 - bool "Netcore NW718" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_BC2 - bool "NexAira BC2" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_OMNI_EMB - bool "Omnima MiniEMBWiFi" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_PSR_680W - bool "Petatel PSR-680W Wireless 3G Router support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_PWH2004 - bool "Prolink PWH2004 / Abocom WR5205 support (32M RAM, 8M flash)" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_V22RW_2X2 - bool "Ralink AP-RT3052-V22RW-2X2 board support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_W306R_V20 - bool "Tenda W306R V2.0 board support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_WL341V3 - bool "Sitecom WL-341 v3 board support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_WL351 - bool "Sitecom WL-351 support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_SL_R7205 - bool "Skyline SL-R7205 Wireless 3G Router support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_WCR150GN - bool "Sparklan WCR-150GN support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_NBG_419N - bool "ZyXEL NBG-419N support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_MZKW300NH2 - bool "Planex MZK-W300NH2 Router support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT305X_MACH_XDX_RN502J - bool "Unknown board XDX-RN502J" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -endmenu - -endif diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile deleted file mode 100644 index 47e9ce52ba..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile +++ /dev/null @@ -1,56 +0,0 @@ -# -# Makefile for the Ralink RT305x SoC specific parts of the kernel -# -# Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> -# -# This program is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License version 2 as published -# by the Free Software Foundation. - -obj-y := irq.o setup.o devices.o rt305x.o clock.o - -obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - -obj-$(CONFIG_RT305X_MACH_3G_6200N) += mach-3g-6200n.o -obj-$(CONFIG_RT305X_MACH_3G300M) += mach-3g300m.o -obj-$(CONFIG_RT305X_MACH_ARGUS_ATP52B) += mach-argus-atp52b.o -obj-$(CONFIG_RT305X_MACH_BC2) += mach-bc2.o -obj-$(CONFIG_RT305X_MACH_AIR3GII) += mach-air3gii.o -obj-$(CONFIG_RT305X_MACH_ALL0256N) += mach-all0256n.o -obj-$(CONFIG_RT305X_MACH_ALL5002) += mach-all5002.o -obj-$(CONFIG_RT305X_MACH_BR6425) += mach-br6425.o -obj-$(CONFIG_RT305X_MACH_BROADWAY) += mach-broadway.o -obj-$(CONFIG_RT305X_MACH_CARAMBOLA) += mach-carambola.o -obj-$(CONFIG_RT305X_MACH_DIR_300_REVB) += mach-dir-300-revb.o -obj-$(CONFIG_RT305X_MACH_DIR_615_H1) += mach-dir-615-h1.o -obj-$(CONFIG_RT305X_MACH_DAP_1350) += mach-dap-1350.o -obj-$(CONFIG_RT305X_MACH_ESR_9753) += mach-esr-9753.o -obj-$(CONFIG_RT305X_MACH_F5D8235_V2) += mach-f5d8235-v2.o -obj-$(CONFIG_RT305X_MACH_FONERA20N) += mach-fonera20n.o -obj-$(CONFIG_RT305X_MACH_RT_N13U) += mach-rt-n13u.o -obj-$(CONFIG_RT305X_MACH_FREESTATION5) += mach-freestation5.o -obj-$(CONFIG_RT305X_MACH_HW550_3G) += mach-hw550-3g.o -obj-$(CONFIG_RT305X_MACH_MOFI3500_3GN) += mach-mofi3500-3gn.o -obj-$(CONFIG_RT305X_MACH_NBG_419N) += mach-nbg-419n.o -obj-$(CONFIG_RT305X_MACH_NW718) += mach-nw718.o -obj-$(CONFIG_RT305X_MACH_OMNI_EMB) += mach-omni-emb.o -obj-$(CONFIG_RT305X_MACH_PSR_680W) += mach-psr-680w.o -obj-$(CONFIG_RT305X_MACH_PWH2004) += mach-pwh2004.o -obj-$(CONFIG_RT305X_MACH_RT_G32_REVB) += mach-rt-g32-revb.o -obj-$(CONFIG_RT305X_MACH_RT_N10_PLUS) += mach-rt-n10-plus.o -obj-$(CONFIG_RT305X_MACH_SL_R7205) += mach-sl-r7205.o -obj-$(CONFIG_RT305X_MACH_V22RW_2X2) += mach-v22rw-2x2.o -obj-$(CONFIG_RT305X_MACH_W306R_V20) += mach-w306r-v20.o -obj-$(CONFIG_RT305X_MACH_W502U) += mach-w502u.o -obj-$(CONFIG_RT305X_MACH_WCR150GN) += mach-wcr150gn.o -obj-$(CONFIG_RT305X_MACH_WHR_G300N) += mach-whr-g300n.o -obj-$(CONFIG_RT305X_MACH_WR512_3GN) += mach-wr512-3gn.o -obj-$(CONFIG_RT305X_MACH_UR_326N4G) += mach-ur-326n4g.o -obj-$(CONFIG_RT305X_MACH_UR_336UN) += mach-ur-336un.o -obj-$(CONFIG_RT305X_MACH_WL_330N) += mach-wl-330n.o -obj-$(CONFIG_RT305X_MACH_WL_330N3G) += mach-wl-330n3g.o -obj-$(CONFIG_RT305X_MACH_WL341V3) += mach-wl341v3.o -obj-$(CONFIG_RT305X_MACH_WL351) += mach-wl351.o -obj-$(CONFIG_RT305X_MACH_WR6202) += mach-wr6202.o -obj-$(CONFIG_RT305X_MACH_MZKW300NH2) += mach-mzk-w300nh2.o -obj-$(CONFIG_RT305X_MACH_XDX_RN502J) += mach-xdx-rn502j.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/clock.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/clock.c deleted file mode 100644 index c46a1747b5..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/clock.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * Ralink RT305X clock API - * - * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/clk.h> - -#include <asm/mach-ralink/common.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> -#include "common.h" - -struct clk { - unsigned long rate; -}; - -static struct clk rt305x_cpu_clk; -static struct clk rt305x_sys_clk; -static struct clk rt305x_wdt_clk; -static struct clk rt305x_uart_clk; - -void __init rt305x_clocks_init(void) -{ - u32 t; - - t = rt305x_sysc_rr(SYSC_REG_SYSTEM_CONFIG); - - if (soc_is_rt305x() || soc_is_rt3350()) { - t = (t >> RT305X_SYSCFG_CPUCLK_SHIFT) & - RT305X_SYSCFG_CPUCLK_MASK; - switch (t) { - case RT305X_SYSCFG_CPUCLK_LOW: - rt305x_cpu_clk.rate = 320000000; - break; - case RT305X_SYSCFG_CPUCLK_HIGH: - rt305x_cpu_clk.rate = 384000000; - break; - } - rt305x_sys_clk.rate = rt305x_cpu_clk.rate / 3; - rt305x_uart_clk.rate = rt305x_sys_clk.rate; - rt305x_wdt_clk.rate = rt305x_sys_clk.rate; - } else if (soc_is_rt3352()) { - t = (t >> RT3352_SYSCFG0_CPUCLK_SHIFT) & - RT3352_SYSCFG0_CPUCLK_MASK; - switch (t) { - case RT3352_SYSCFG0_CPUCLK_LOW: - rt305x_cpu_clk.rate = 384000000; - break; - case RT3352_SYSCFG0_CPUCLK_HIGH: - rt305x_cpu_clk.rate = 400000000; - break; - } - rt305x_sys_clk.rate = rt305x_cpu_clk.rate / 3; - rt305x_uart_clk.rate = 40000000; - rt305x_wdt_clk.rate = rt305x_sys_clk.rate; - } else if (soc_is_rt5350()) { - t = (t >> RT5350_SYSCFG0_CPUCLK_SHIFT) & - RT5350_SYSCFG0_CPUCLK_MASK; - switch (t) { - case RT5350_SYSCFG0_CPUCLK_360: - rt305x_cpu_clk.rate = 360000000; - rt305x_sys_clk.rate = rt305x_cpu_clk.rate / 3; - break; - case RT5350_SYSCFG0_CPUCLK_320: - rt305x_cpu_clk.rate = 320000000; - rt305x_sys_clk.rate = rt305x_cpu_clk.rate / 4; - break; - case RT5350_SYSCFG0_CPUCLK_300: - rt305x_cpu_clk.rate = 300000000; - rt305x_sys_clk.rate = rt305x_cpu_clk.rate / 3; - break; - default: - BUG(); - } - rt305x_uart_clk.rate = 40000000; - rt305x_wdt_clk.rate = rt305x_sys_clk.rate; - } else { - BUG(); - } - -} - -/* - * Linux clock API - */ -struct clk *clk_get(struct device *dev, const char *id) -{ - if (!strcmp(id, "sys")) - return &rt305x_sys_clk; - - if (!strcmp(id, "cpu")) - return &rt305x_cpu_clk; - - if (!strcmp(id, "wdt")) - return &rt305x_wdt_clk; - - if (!strcmp(id, "uart")) - return &rt305x_uart_clk; - - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get); - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/common.h b/target/linux/ramips/files/arch/mips/ralink/rt305x/common.h deleted file mode 100644 index 48ac43e81b..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/common.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Ralink RT305x SoC common defines - * - * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _RT305X_COMMON_H -#define _RT305X_COMMON_H - -void rt305x_clocks_init(void); - -#endif /* _RT305X_COMMON_H */
\ No newline at end of file diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c deleted file mode 100644 index f16ba6d5f1..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c +++ /dev/null @@ -1,428 +0,0 @@ -/* - * Ralink RT305x SoC platform device registration - * - * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/physmap.h> -#include <linux/spi/spi.h> -#include <linux/rt2x00_platform.h> -#include <linux/delay.h> -#include <linux/dma-mapping.h> -#include <linux/usb/ehci_pdriver.h> -#include <linux/usb/ohci_pdriver.h> - -#include <asm/addrspace.h> - -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> -#include "devices.h" - -#include <ramips_eth_platform.h> -#include <rt305x_esw_platform.h> - -static struct resource rt305x_flash0_resources[] = { - { - .flags = IORESOURCE_MEM, - .start = KSEG1ADDR(RT305X_FLASH0_BASE), - .end = KSEG1ADDR(RT305X_FLASH0_BASE) + - RT305X_FLASH0_SIZE - 1, - }, -}; - -struct physmap_flash_data rt305x_flash0_data; -static struct platform_device rt305x_flash0_device = { - .name = "physmap-flash", - .resource = rt305x_flash0_resources, - .num_resources = ARRAY_SIZE(rt305x_flash0_resources), - .dev = { - .platform_data = &rt305x_flash0_data, - }, -}; - -static struct resource rt305x_flash1_resources[] = { - { - .flags = IORESOURCE_MEM, - .start = KSEG1ADDR(RT305X_FLASH1_BASE), - .end = KSEG1ADDR(RT305X_FLASH1_BASE) + - RT305X_FLASH1_SIZE - 1, - }, -}; - -struct physmap_flash_data rt305x_flash1_data; -static struct platform_device rt305x_flash1_device = { - .name = "physmap-flash", - .resource = rt305x_flash1_resources, - .num_resources = ARRAY_SIZE(rt305x_flash1_resources), - .dev = { - .platform_data = &rt305x_flash1_data, - }, -}; - -static int rt305x_flash_instance __initdata; -void __init rt305x_register_flash(unsigned int id) -{ - struct platform_device *pdev; - struct physmap_flash_data *pdata; - u32 t; - int reg; - - switch (id) { - case 0: - pdev = &rt305x_flash0_device; - reg = MEMC_REG_FLASH_CFG0; - break; - case 1: - pdev = &rt305x_flash1_device; - reg = MEMC_REG_FLASH_CFG1; - break; - default: - return; - } - - t = rt305x_memc_rr(reg); - t = (t >> FLASH_CFG_WIDTH_SHIFT) & FLASH_CFG_WIDTH_MASK; - - pdata = pdev->dev.platform_data; - switch (t) { - case FLASH_CFG_WIDTH_8BIT: - pdata->width = 1; - break; - case FLASH_CFG_WIDTH_16BIT: - pdata->width = 2; - break; - case FLASH_CFG_WIDTH_32BIT: - pdata->width = 4; - break; - default: - printk(KERN_ERR "RT305x: flash bank%u witdh is invalid\n", id); - return; - } - - pdev->id = rt305x_flash_instance; - - platform_device_register(pdev); - rt305x_flash_instance++; -} - -static void rt305x_fe_reset(void) -{ - u32 reset_bits = RT305X_RESET_FE; - - if (soc_is_rt5350()) - reset_bits |= RT305X_RESET_ESW; - rt305x_sysc_wr(reset_bits, SYSC_REG_RESET_CTRL); - rt305x_sysc_wr(0, SYSC_REG_RESET_CTRL); -} - -static struct resource rt305x_eth_resources[] = { - { - .start = RT305X_FE_BASE, - .end = RT305X_FE_BASE + PAGE_SIZE - 1, - .flags = IORESOURCE_MEM, - }, { - .start = RT305X_CPU_IRQ_FE, - .end = RT305X_CPU_IRQ_FE, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct ramips_eth_platform_data ramips_eth_data = { - .mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 }, - .reset_fe = rt305x_fe_reset, - .min_pkt_len = 64, -}; - -static struct platform_device rt305x_eth_device = { - .name = "ramips_eth", - .resource = rt305x_eth_resources, - .num_resources = ARRAY_SIZE(rt305x_eth_resources), - .dev = { - .platform_data = &ramips_eth_data, - } -}; - -static struct resource rt305x_esw_resources[] = { - { - .start = RT305X_SWITCH_BASE, - .end = RT305X_SWITCH_BASE + PAGE_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -struct rt305x_esw_platform_data rt305x_esw_data = { - /* All ports are LAN ports. */ - .vlan_config = RT305X_ESW_VLAN_CONFIG_NONE, - .reg_initval_fct2 = 0x00d6500c, - /* - * ext phy base addr 31, enable port 5 polling, rx/tx clock skew 1, - * turbo mii off, rgmi 3.3v off - * port5: disabled - * port6: enabled, gige, full-duplex, rx/tx-flow-control - */ - .reg_initval_fpa2 = 0x3f502b28, -}; - -static struct platform_device rt305x_esw_device = { - .name = "rt305x-esw", - .resource = rt305x_esw_resources, - .num_resources = ARRAY_SIZE(rt305x_esw_resources), - .dev = { - .platform_data = &rt305x_esw_data, - } -}; - -void __init rt305x_register_ethernet(void) -{ - struct clk *clk; - - clk = clk_get(NULL, "sys"); - if (IS_ERR(clk)) - panic("unable to get SYS clock, err=%ld", PTR_ERR(clk)); - - ramips_eth_data.sys_freq = clk_get_rate(clk); - - platform_device_register(&rt305x_esw_device); - platform_device_register(&rt305x_eth_device); -} - -static struct resource rt305x_wifi_resources[] = { - { - .start = RT305X_WMAC_BASE, - .end = RT305X_WMAC_BASE + 0x3FFFF, - .flags = IORESOURCE_MEM, - }, { - .start = RT305X_CPU_IRQ_WNIC, - .end = RT305X_CPU_IRQ_WNIC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct rt2x00_platform_data rt305x_wifi_data; -static struct platform_device rt305x_wifi_device = { - .name = "rt2800_wmac", - .resource = rt305x_wifi_resources, - .num_resources = ARRAY_SIZE(rt305x_wifi_resources), - .dev = { - .platform_data = &rt305x_wifi_data, - } -}; - -void __init rt305x_register_wifi(void) -{ - u32 t; - - rt305x_wifi_data.eeprom_file_name = "soc_wmac.eeprom"; - - if (soc_is_rt3352() || soc_is_rt5350()) { - t = rt305x_sysc_rr(SYSC_REG_SYSTEM_CONFIG); - t &= RT3352_SYSCFG0_XTAL_SEL; - if (!t) - rt305x_wifi_data.clk_is_20mhz = 1; - } - platform_device_register(&rt305x_wifi_device); -} - -static struct resource rt305x_wdt_resources[] = { - { - .start = RT305X_TIMER_BASE, - .end = RT305X_TIMER_BASE + RT305X_TIMER_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device rt305x_wdt_device = { - .name = "ramips-wdt", - .id = -1, - .resource = rt305x_wdt_resources, - .num_resources = ARRAY_SIZE(rt305x_wdt_resources), -}; - -void __init rt305x_register_wdt(void) -{ - u32 t; - - /* enable WDT reset output on pin SRAM_CS_N */ - t = rt305x_sysc_rr(SYSC_REG_SYSTEM_CONFIG); - t |= RT305X_SYSCFG_SRAM_CS0_MODE_WDT << - RT305X_SYSCFG_SRAM_CS0_MODE_SHIFT; - rt305x_sysc_wr(t, SYSC_REG_SYSTEM_CONFIG); - - platform_device_register(&rt305x_wdt_device); -} - -static struct resource rt305x_spi_resources[] = { - { - .flags = IORESOURCE_MEM, - .start = RT305X_SPI_BASE, - .end = RT305X_SPI_BASE + RT305X_SPI_SIZE - 1, - }, -}; - -static struct platform_device rt305x_spi_device = { - .name = "ramips-spi", - .id = 0, - .resource = rt305x_spi_resources, - .num_resources = ARRAY_SIZE(rt305x_spi_resources), -}; - -void __init rt305x_register_spi(struct spi_board_info *info, int n) -{ - spi_register_board_info(info, n); - platform_device_register(&rt305x_spi_device); -} - -static struct resource rt305x_dwc_otg_resources[] = { - { - .start = RT305X_OTG_BASE, - .end = RT305X_OTG_BASE + 0x3FFFF, - .flags = IORESOURCE_MEM, - }, { - .start = RT305X_INTC_IRQ_OTG, - .end = RT305X_INTC_IRQ_OTG, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device rt305x_dwc_otg_device = { - .name = "dwc_otg", - .resource = rt305x_dwc_otg_resources, - .num_resources = ARRAY_SIZE(rt305x_dwc_otg_resources), - .dev = { - .platform_data = NULL, - } -}; - -static atomic_t rt3352_usb_pwr_ref = ATOMIC_INIT(0); - -static int rt3352_usb_power_on(struct platform_device *pdev) -{ - - if (atomic_inc_return(&rt3352_usb_pwr_ref) == 1) { - u32 t; - - t = rt305x_sysc_rr(RT3352_SYSC_REG_USB_PS); - - /* enable clock for port0's and port1's phys */ - t = rt305x_sysc_rr(RT3352_SYSC_REG_CLKCFG1); - t |= RT3352_CLKCFG1_UPHY0_CLK_EN | RT3352_CLKCFG1_UPHY1_CLK_EN; - rt305x_sysc_wr(t, RT3352_SYSC_REG_CLKCFG1); - mdelay(500); - - /* pull USBHOST and USBDEV out from reset */ - t = rt305x_sysc_rr(RT3352_SYSC_REG_RSTCTRL); - t &= ~(RT3352_RSTCTRL_UHST | RT3352_RSTCTRL_UDEV); - rt305x_sysc_wr(t, RT3352_SYSC_REG_RSTCTRL); - mdelay(500); - - /* enable host mode */ - t = rt305x_sysc_rr(RT3352_SYSC_REG_SYSCFG1); - t |= RT3352_SYSCFG1_USB0_HOST_MODE; - rt305x_sysc_wr(t, RT3352_SYSC_REG_SYSCFG1); - - t = rt305x_sysc_rr(RT3352_SYSC_REG_USB_PS); - } - - return 0; -} - -static void rt3352_usb_power_off(struct platform_device *pdev) -{ - - if (atomic_dec_return(&rt3352_usb_pwr_ref) == 0) { - u32 t; - - /* put USBHOST and USBDEV into reset */ - t = rt305x_sysc_rr(RT3352_SYSC_REG_RSTCTRL); - t |= RT3352_RSTCTRL_UHST | RT3352_RSTCTRL_UDEV; - rt305x_sysc_wr(t, RT3352_SYSC_REG_RSTCTRL); - udelay(10000); - - /* disable clock for port0's and port1's phys*/ - t = rt305x_sysc_rr(RT3352_SYSC_REG_CLKCFG1); - t &= ~(RT3352_CLKCFG1_UPHY0_CLK_EN | RT3352_CLKCFG1_UPHY1_CLK_EN); - rt305x_sysc_wr(t, RT3352_SYSC_REG_CLKCFG1); - udelay(10000); - } -} - -static struct usb_ehci_pdata rt3352_ehci_data = { - .power_on = rt3352_usb_power_on, - .power_off = rt3352_usb_power_off, -}; - -static struct resource rt3352_ehci_resources[] = { - { - .start = RT3352_EHCI_BASE, - .end = RT3352_EHCI_BASE + RT3352_EHCI_SIZE - 1, - .flags = IORESOURCE_MEM, - }, { - .start = RT305X_INTC_IRQ_OTG, - .end = RT305X_INTC_IRQ_OTG, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 rt3352_ehci_dmamask = DMA_BIT_MASK(32); -static struct platform_device rt3352_ehci_device = { - .name = "ehci-platform", - .id = -1, - .resource = rt3352_ehci_resources, - .num_resources = ARRAY_SIZE(rt3352_ehci_resources), - .dev = { - .dma_mask = &rt3352_ehci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &rt3352_ehci_data, - }, -}; - -static struct resource rt3352_ohci_resources[] = { - { - .start = RT3352_OHCI_BASE, - .end = RT3352_OHCI_BASE + RT3352_OHCI_SIZE - 1, - .flags = IORESOURCE_MEM, - }, { - .start = RT305X_INTC_IRQ_OTG, - .end = RT305X_INTC_IRQ_OTG, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct usb_ohci_pdata rt3352_ohci_data = { - .power_on = rt3352_usb_power_on, - .power_off = rt3352_usb_power_off, -}; - -static u64 rt3352_ohci_dmamask = DMA_BIT_MASK(32); -static struct platform_device rt3352_ohci_device = { - .name = "ohci-platform", - .id = -1, - .resource = rt3352_ohci_resources, - .num_resources = ARRAY_SIZE(rt3352_ohci_resources), - .dev = { - .dma_mask = &rt3352_ohci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &rt3352_ohci_data, - }, -}; - -void __init rt305x_register_usb(void) -{ - if (soc_is_rt305x() || soc_is_rt3350()) { - platform_device_register(&rt305x_dwc_otg_device); - } else if (soc_is_rt3352() || soc_is_rt5350()) { - platform_device_register(&rt3352_ehci_device); - platform_device_register(&rt3352_ohci_device); - } else { - BUG(); - } -} diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.h b/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.h deleted file mode 100644 index 22c9ce4232..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Ralink RT305x SoC specific platform device definitions - * - * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef __RT305X_DEVICES_H -#define __RT305X_DEVICES_H - -#include <asm/mach-ralink/rt305x_esw_platform.h> - -struct physmap_flash_data; -struct spi_board_info; - -extern struct physmap_flash_data rt305x_flash0_data; -extern struct physmap_flash_data rt305x_flash1_data; - -extern struct rt305x_esw_platform_data rt305x_esw_data; - -void rt305x_register_flash(unsigned int id); -void rt305x_register_ethernet(void); -void rt305x_register_wifi(void); -void rt305x_register_wdt(void); -void rt305x_register_spi(struct spi_board_info *info, int n); -void rt305x_register_usb(void); - -#endif /* __RT305X_DEVICES_H */ - diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/early_printk.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/early_printk.c deleted file mode 100644 index 602df863ef..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/early_printk.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Ralink RT305x SoC early printk support - * - * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/io.h> -#include <linux/serial_reg.h> - -#include <asm/addrspace.h> - -#include <asm/mach-ralink/rt305x_regs.h> - -#define UART_READ(r) \ - __raw_readl((void __iomem *)(KSEG1ADDR(RT305X_UART1_BASE) + 4 * (r))) - -#define UART_WRITE(r, v) \ - __raw_writel((v), (void __iomem *)(KSEG1ADDR(RT305X_UART1_BASE) + 4 * (r))) - -void prom_putchar(unsigned char ch) -{ - while (((UART_READ(UART_REG_LSR)) & UART_LSR_THRE) == 0); - UART_WRITE(UART_REG_TX, ch); - while (((UART_READ(UART_REG_LSR)) & UART_LSR_THRE) == 0); -} diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/irq.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/irq.c deleted file mode 100644 index fcac2dd860..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/irq.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * Ralink RT305x SoC specific interrupt handling - * - * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> - -#include <asm/irq_cpu.h> -#include <asm/mipsregs.h> - -#include <asm/mach-ralink/common.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -static void rt305x_intc_irq_dispatch(void) -{ - u32 pending; - - pending = ramips_intc_get_status(); - - if (pending & RT305X_INTC_INT_TIMER0) - do_IRQ(RT305X_INTC_IRQ_TIMER0); - - else if (pending & RT305X_INTC_INT_TIMER1) - do_IRQ(RT305X_INTC_IRQ_TIMER1); - - else if (pending & RT305X_INTC_INT_UART0) - do_IRQ(RT305X_INTC_IRQ_UART0); - - else if (pending & RT305X_INTC_INT_UART1) - do_IRQ(RT305X_INTC_IRQ_UART1); - - else if (pending & RT305X_INTC_INT_PERFC) - do_IRQ(RT305X_INTC_IRQ_PERFC); - - else if (pending & RT305X_INTC_INT_OTG) - do_IRQ(RT305X_INTC_IRQ_OTG); - - /* TODO: handle PIO interrupts as well */ - - else - spurious_interrupt(); -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned long pending; - - pending = read_c0_status() & read_c0_cause() & ST0_IM; - - if (pending & STATUSF_IP7) - do_IRQ(RT305X_CPU_IRQ_COUNTER); - - else if (pending & STATUSF_IP5) - do_IRQ(RT305X_CPU_IRQ_FE); - - else if (pending & STATUSF_IP6) - do_IRQ(RT305X_CPU_IRQ_WNIC); - - else if (pending & STATUSF_IP2) - rt305x_intc_irq_dispatch(); - - else - spurious_interrupt(); -} - -void __init arch_init_irq(void) -{ - mips_cpu_irq_init(); - ramips_intc_irq_init(RT305X_INTC_BASE, RT305X_CPU_IRQ_INTC, - RT305X_INTC_IRQ_BASE); - - cp0_perfcount_irq = RT305X_INTC_IRQ_PERFC; -} diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-3g-6200n.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-3g-6200n.c deleted file mode 100644 index ade4fe9008..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-3g-6200n.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Edimax 3g-6200n board support - * - * Copyright (C) 2011 Andrzej Hajda <andrzej.hajda@wp.pl> - * Copyright (C) 2012 Lukasz Golebiowski <lgolebio@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define EDIMAX_GPIO_BUTTON_WPS 12 -#define EDIMAX_GPIO_BTN_0 13 /* Wifi on/off switch button */ - -#define EDIMAX_GPIO_LED_POWER 9 -#define EDIMAX_GPIO_LED_WLAN 14 -#define EDIMAX_GPIO_LED_3G 7 - -#define EDIMAX_KEYS_POLL_INTERVAL 20 -#define EDIMAX_KEYS_DEBOUNCE_INTERVAL (3 * EDIMAX_KEYS_POLL_INTERVAL) - -static struct gpio_led edimax_leds_gpio[] __initdata = { - { - .name = "edimax:green:power", - .gpio = EDIMAX_GPIO_LED_POWER, - .active_low = 1, - }, { - .name = "edimax:amber:wlan", - .gpio = EDIMAX_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "edimax:blue:3g", - .gpio = EDIMAX_GPIO_LED_3G, - .active_low = 1, - } -}; - -static struct gpio_keys_button edimax_gpio_buttons[] __initdata = { - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = EDIMAX_KEYS_DEBOUNCE_INTERVAL, - .gpio = EDIMAX_GPIO_BUTTON_WPS, - .active_low = 1, - }, { - .desc = "wlanswitch", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = EDIMAX_KEYS_DEBOUNCE_INTERVAL, - .gpio = EDIMAX_GPIO_BTN_0, - .active_low = 1, - } -}; - -static void __init edimax_init(void) -{ - rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - - rt305x_register_flash(0); - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; - rt305x_register_ethernet(); - ramips_register_gpio_leds(-1, ARRAY_SIZE(edimax_leds_gpio), - edimax_leds_gpio); - ramips_register_gpio_buttons(-1, EDIMAX_KEYS_POLL_INTERVAL, - ARRAY_SIZE(edimax_gpio_buttons), - edimax_gpio_buttons); - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_3G_6200N, "3G-6200N", "Edimax 3g-6200n", - edimax_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-3g300m.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-3g300m.c deleted file mode 100644 index e4993b303e..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-3g300m.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * Tenda 3G300M board support - * - * Copyright (C) 2013 Cezary Jackiewicz <cezary.jackiewicz@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> -#include <linux/gpio.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define TENDA_3G300M_GPIO_BUTTON_RESET 0 -#define TENDA_3G300M_GPIO_BUTTON_MODE 10 - -#define TENDA_3G300M_GPIO_LED_3GROUTER 11 -#define TENDA_3G300M_GPIO_LED_AP 12 -#define TENDA_3G300M_GPIO_LED_WISPROUTER 9 -#define TENDA_3G300M_GPIO_LED_WIRELESSROUTER 13 -#define TENDA_3G300M_GPIO_LED_3G 7 -#define TENDA_3G300M_GPIO_LED_WPSRESET 14 - -#define TENDA_3G300M_KEYS_POLL_INTERVAL 20 -#define TENDA_3G300M_KEYS_DEBOUNCE_INTERVAL (3 * TENDA_3G300M_KEYS_POLL_INTERVAL) - -const struct flash_platform_data tenda_3g300m_flash = { - .type = "mx25l3205d", -}; - -struct spi_board_info tenda_3g300m_spi_slave_info[] __initdata = { - { - .modalias = "m25p80", - .platform_data = &tenda_3g300m_flash, - .irq = -1, - .max_speed_hz = 10000000, - .bus_num = 0, - .chip_select = 0, - } -}; - -static struct gpio_led tenda_3g300m_leds_gpio[] __initdata = { - { - .name = "tenda:blue:3grouter", - .gpio = TENDA_3G300M_GPIO_LED_3GROUTER, - .active_low = 1, - },{ - .name = "tenda:blue:ap", - .gpio = TENDA_3G300M_GPIO_LED_AP, - .active_low = 1, - },{ - .name = "tenda:blue:wisprouter", - .gpio = TENDA_3G300M_GPIO_LED_WISPROUTER, - .active_low = 1, - },{ - .name = "tenda:blue:wirelessrouter", - .gpio = TENDA_3G300M_GPIO_LED_WIRELESSROUTER, - .active_low = 1, - },{ - .name = "tenda:blue:3g", - .gpio = TENDA_3G300M_GPIO_LED_3G, - .active_low = 1, - },{ - .name = "tenda:blue:wpsreset", - .gpio = TENDA_3G300M_GPIO_LED_WPSRESET, - .active_low = 1, - } -}; - -static struct gpio_keys_button tenda_3g300m_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TENDA_3G300M_KEYS_DEBOUNCE_INTERVAL, - .gpio = TENDA_3G300M_GPIO_BUTTON_RESET, - .active_low = 1, - },{ - .desc = "mode", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = TENDA_3G300M_KEYS_DEBOUNCE_INTERVAL, - .gpio = TENDA_3G300M_GPIO_BUTTON_MODE, - .active_low = 1, - } -}; - -static void __init tenda_3g300m_init(void) -{ - rt305x_gpio_init((RT305X_GPIO_MODE_GPIO << - RT305X_GPIO_MODE_UART0_SHIFT) | - RT305X_GPIO_MODE_JTAG); - - rt305x_register_spi(tenda_3g300m_spi_slave_info, - ARRAY_SIZE(tenda_3g300m_spi_slave_info)); - - ramips_register_gpio_leds(-1, ARRAY_SIZE(tenda_3g300m_leds_gpio), - tenda_3g300m_leds_gpio); - - ramips_register_gpio_buttons(-1, TENDA_3G300M_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tenda_3g300m_gpio_buttons), - tenda_3g300m_gpio_buttons); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; - rt305x_register_ethernet(); - - rt305x_register_wifi(); - - rt305x_register_wdt(); - - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_3G300M, "3G300M", "Tenda 3G300M", - tenda_3g300m_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-air3gii.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-air3gii.c deleted file mode 100644 index aca238abe1..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-air3gii.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * AirLive Air3GII board support - * - * Copyright (C) 2012 Cezary Jackiewicz <cezary.jackiewicz@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define AIR3GII_GPIO_BUTTON_WPS 7 - -#define AIR3GII_GPIO_LED_WLAN 8 -#define AIR3GII_GPIO_LED_MOBILE 9 - -#define AIR3GII_KEYS_POLL_INTERVAL 20 -#define AIR3GII_KEYS_DEBOUNCE_INTERVAL (3 * AIR3GII_KEYS_POLL_INTERVAL) - -const struct flash_platform_data air3gii_flash = { - .type = "en25q32b", -}; - -struct spi_board_info air3gii_spi_slave_info[] __initdata = { - { - .modalias = "m25p80", - .platform_data = &air3gii_flash, - .irq = -1, - .max_speed_hz = 10000000, - .bus_num = 0, - .chip_select = 0, - }, -}; - -static struct gpio_led air3gii_leds_gpio[] __initdata = { - { - .name = "airlive:green:wlan", - .gpio = AIR3GII_GPIO_LED_WLAN, - .active_low = 0, - }, { - .name = "airlive:green:mobile", - .gpio = AIR3GII_GPIO_LED_MOBILE, - .active_low = 1, - } -}; - -static struct gpio_keys_button air3gii_gpio_buttons[] __initdata = { - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = AIR3GII_KEYS_DEBOUNCE_INTERVAL, - .gpio = AIR3GII_GPIO_BUTTON_WPS, - .active_low = 1, - } -}; - -static void __init air3gii_init(void) -{ - rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - - rt305x_register_spi(air3gii_spi_slave_info, - ARRAY_SIZE(air3gii_spi_slave_info)); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; - rt305x_register_ethernet(); - - ramips_register_gpio_leds(-1, ARRAY_SIZE(air3gii_leds_gpio), - air3gii_leds_gpio); - - ramips_register_gpio_buttons(-1, AIR3GII_KEYS_POLL_INTERVAL, - ARRAY_SIZE(air3gii_gpio_buttons), - air3gii_gpio_buttons); - - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_AIR3GII, "AIR3GII", "AirLive Air3GII", - air3gii_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-all0256n.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-all0256n.c deleted file mode 100644 index 7f5e00b418..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-all0256n.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * Allnet ALL0256N board support - * - * Copyright (C) 2012 Daniel Golle <dgolle@allnet.de> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define ALL0256N_GPIO_BUTTON_RESET 0 -#define ALL0256N_GPIO_LED_RSSI_LOW 14 -#define ALL0256N_GPIO_LED_RSSI_MED 12 -#define ALL0256N_GPIO_LED_RSSI_HIGH 13 -#define ALL0256N_KEYS_POLL_INTERVAL 20 -#define ALL0256N_KEYS_DEBOUNCE_INTERVAL (3 * ALL0256N_KEYS_POLL_INTERVAL) - -const struct flash_platform_data all0256n_flash = { - .type = "mx25l3205d", -}; - -struct spi_board_info all0256n_spi_slave_info[] __initdata = { - { - .modalias = "m25p80", - .platform_data = &all0256n_flash, - .irq = -1, - .max_speed_hz = 10000000, - .bus_num = 0, - .chip_select = 0, - }, -}; - -static struct gpio_keys_button all0256n_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ALL0256N_KEYS_DEBOUNCE_INTERVAL, - .gpio = ALL0256N_GPIO_BUTTON_RESET, - .active_low = 1, - } -}; - -static struct gpio_led all0256n_leds_gpio[] __initdata = { - { - .name = "all0256n:green:rssilow", - .gpio = ALL0256N_GPIO_LED_RSSI_LOW, - .active_low = 1, - }, { - .name = "all0256n:green:rssimed", - .gpio = ALL0256N_GPIO_LED_RSSI_MED, - .active_low = 1, - }, { - .name = "all0256n:green:rssihigh", - .gpio = ALL0256N_GPIO_LED_RSSI_HIGH, - .active_low = 1, - } -}; - -static void __init all0256n_init(void) -{ - rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - rt305x_register_spi(all0256n_spi_slave_info, - ARRAY_SIZE(all0256n_spi_slave_info)); - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE; - rt305x_register_ethernet(); - ramips_register_gpio_leds(-1, ARRAY_SIZE(all0256n_leds_gpio), - all0256n_leds_gpio); - ramips_register_gpio_buttons(-1, ALL0256N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(all0256n_gpio_buttons), - all0256n_gpio_buttons); - rt305x_register_wifi(); - rt305x_register_wdt(); -} - -MIPS_MACHINE(RAMIPS_MACH_ALL0256N, "ALL0256N", "Allnet ALL0256N", - all0256n_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-all5002.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-all5002.c deleted file mode 100644 index 71938f028c..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-all5002.c +++ /dev/null @@ -1,61 +0,0 @@ -/* - * Allnet ALL5002 - * - * Copyright (C) 2012 Daniel Golle <dgolle@allnet.de> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -// #define ALL5002_GPIO_BUTTON_RESET 0 -// #define ALL5002_GPIO_LED_RSSI_LOW 14 -// #define ALL5002_GPIO_LED_RSSI_MED 12 -// #define ALL5002_GPIO_LED_RSSI_HIGH 13 -// #define ALL5002_BUTTONS_POLL_INTERVAL 20 - -const struct flash_platform_data all5002_flash = { - .type = "mx25l25635e", -}; - -struct spi_board_info all5002_spi_slave_info[] __initdata = { - { - .modalias = "m25p80", - .platform_data = &all5002_flash, - .irq = -1, - .max_speed_hz = 10000000, - .bus_num = 0, - .chip_select = 0, - }, -}; - -static void __init all5002_init(void) -{ - rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - rt305x_register_spi(all5002_spi_slave_info, - ARRAY_SIZE(all5002_spi_slave_info)); - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE; - rt305x_register_ethernet(); - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_ALL5002, "ALL5002", "Allnet ALL5002/ALL5003", - all5002_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-argus-atp52b.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-argus-atp52b.c deleted file mode 100644 index b683485d71..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-argus-atp52b.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Argus ATP-52B router support - * http://www.argus-co.com/english/productsview.php?id=70&cid=81 - * - * Copyright (C) 2011 Roman Yeryomin <roman@advem.lv> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define ARGUS_ATP52B_GPIO_LED_RUN 9 -#define ARGUS_ATP52B_GPIO_LED_NET 13 -#define ARGUS_ATP52B_GPIO_BUTTON_WPS 0 -#define ARGUS_ATP52B_GPIO_BUTTON_RESET 10 -#define ARGUS_ATP52B_KEYS_POLL_INTERVAL 20 -#define ARGUS_ATP52B_KEYS_DEBOUNCE_INTERVAL (3 * ARGUS_ATP52B_KEYS_POLL_INTERVAL) - -static struct gpio_led argus_atp52b_leds_gpio[] __initdata = { - { - .name = "argus-atp52b:green:run", - .gpio = ARGUS_ATP52B_GPIO_LED_RUN, - .active_low = 1, - }, - { - .name = "argus-atp52b:amber:net", - .gpio = ARGUS_ATP52B_GPIO_LED_NET, - .active_low = 1, - } -}; - -static struct gpio_keys_button argus_atp52b_gpio_buttons[] __initdata = { - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = ARGUS_ATP52B_KEYS_DEBOUNCE_INTERVAL, - .gpio = ARGUS_ATP52B_GPIO_BUTTON_WPS, - .active_low = 1, - }, - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ARGUS_ATP52B_KEYS_DEBOUNCE_INTERVAL, - .gpio = ARGUS_ATP52B_GPIO_BUTTON_RESET, - .active_low = 1, - } -}; - -static void __init argus_atp52b_init(void) -{ - rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - - rt305x_register_flash(0); - - ramips_register_gpio_leds(-1, ARRAY_SIZE(argus_atp52b_leds_gpio), - argus_atp52b_leds_gpio); - ramips_register_gpio_buttons(-1, ARGUS_ATP52B_KEYS_POLL_INTERVAL, - ARRAY_SIZE(argus_atp52b_gpio_buttons), - argus_atp52b_gpio_buttons); - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; - rt305x_register_ethernet(); - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_ARGUS_ATP52B, "ARGUS_ATP52B", "Argus ATP-52B", - argus_atp52b_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-bc2.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-bc2.c deleted file mode 100644 index 7a21488511..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-bc2.c +++ /dev/null @@ -1,70 +0,0 @@ -/* - * NexAira BC2 board support - * - * Copyright (C) 2011 Adam J. Porter <porter.adam@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define BC2_GPIO_BUTTON_RESET 17 -#define BC2_GPIO_LED_USB 20 - -#define BC2_KEYS_POLL_INTERVAL 20 -#define BC2_KEYS_DEBOUNCE_INTERVAL (3 * BC2_KEYS_POLL_INTERVAL) - -static struct gpio_led bc2_leds_gpio[] __initdata = { - { - .name = "bc2:blue:usb", - .gpio = BC2_GPIO_LED_USB, - .active_low = 1, - } -}; - -static struct gpio_keys_button bc2_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = BC2_KEYS_DEBOUNCE_INTERVAL, - .gpio = BC2_GPIO_BUTTON_RESET, - .active_low = 1, - } -}; - -static void __init bc2_init(void) -{ - rt305x_gpio_init((RT305X_GPIO_MODE_GPIO << - RT305X_GPIO_MODE_UART0_SHIFT) | - RT305X_GPIO_MODE_JTAG); - - rt305x_register_flash(0); - - ramips_register_gpio_leds(-1, ARRAY_SIZE(bc2_leds_gpio), - bc2_leds_gpio); - - ramips_register_gpio_buttons(-1, BC2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(bc2_gpio_buttons), - bc2_gpio_buttons); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; - rt305x_register_ethernet(); - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_BC2, "BC2", "NexAira BC2", - bc2_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-br6425.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-br6425.c deleted file mode 100644 index 3a24516496..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-br6425.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Edimax BR-6425 board support - * - * Copyright (C) 2012 OpenWrt.org - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define BR6425_GPIO_LED_POWER 9 -#define BR6425_GPIO_BUTTON_RESET 12 -#define BR6425_GPIO_SWITCH_RFKILL 13 -#define BR6425_GPIO_LED_WLAN 14 -#define BR6425_KEYS_POLL_INTERVAL 20 -#define BR6425_KEYS_DEBOUNCE_INTERVAL (3 * BR6425_KEYS_POLL_INTERVAL) - -static struct gpio_keys_button br6425_gpio_buttons[] __initdata = { - { - .desc = "reset_wps", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = BR6425_KEYS_DEBOUNCE_INTERVAL, - .gpio = BR6425_GPIO_BUTTON_RESET, - .active_low = 1, - }, - { - .desc = "RFKILL switch", - .type = EV_SW, - .code = KEY_RFKILL, - .debounce_interval = BR6425_KEYS_DEBOUNCE_INTERVAL, - .gpio = BR6425_GPIO_SWITCH_RFKILL, - .active_low = 1, - }, -}; - -static struct gpio_led br6425_leds_gpio[] __initdata = { - { - .name = "edimax:green:power", - .gpio = BR6425_GPIO_LED_POWER, - .active_low = 1, - }, { - .name = "edimax:orange:wlan", - .gpio = BR6425_GPIO_LED_WLAN, - .active_low = 1, - }, -}; - -static void __init br6425_init(void) -{ - rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - rt305x_register_flash(0); - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; - rt305x_register_ethernet(); - ramips_register_gpio_leds(-1, ARRAY_SIZE(br6425_leds_gpio), - br6425_leds_gpio); - ramips_register_gpio_buttons(-1, BR6425_KEYS_POLL_INTERVAL, - ARRAY_SIZE(br6425_gpio_buttons), - br6425_gpio_buttons); - rt305x_register_wifi(); - rt305x_register_wdt(); -} - -MIPS_MACHINE(RAMIPS_MACH_BR6425, "BR-6425", "Edimax BR-6425", - br6425_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-broadway.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-broadway.c deleted file mode 100644 index 74dfaa30b0..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-broadway.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Hauppauge/PCTV Broadway Support - * - * Copyright (C) 2012 Devin Heitmueller <dheitmueller@kernellabs.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define BROADWAY_GPIO_LED_DISKMOUNT 9 -#define BROADWAY_GPIO_LED_WPS 14 - -#define BROADWAY_GPIO_BUTTON_WPS 0 -#define BROADWAY_GPIO_BUTTON_FACTORYRESET 13 - -#define BROADWAY_KEYS_POLL_INTERVAL 20 -#define BROADWAY_KEYS_DEBOUNCE_INTERVAL (3 * BROADWAY_KEYS_POLL_INTERVAL) - -static struct gpio_led broadway_leds_gpio[] __initdata = { - { - .name = "red:diskmounted", - .gpio = BROADWAY_GPIO_LED_DISKMOUNT, - .active_low = 1, - }, - { - .name = "red:wps_active", - .gpio = BROADWAY_GPIO_LED_WPS, - .active_low = 1, - }, -}; - -static struct gpio_keys_button broadway_gpio_buttons[] __initdata = { - { - .desc = "Factory Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = BROADWAY_KEYS_DEBOUNCE_INTERVAL, - .gpio = BROADWAY_GPIO_BUTTON_FACTORYRESET, - .active_low = 1, - }, -#ifdef DJH_WPS_BUTTON_NOT_WIRED_TO_GPIO - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = BROADWAY_KEYS_DEBOUNCE_INTERVAL, - .gpio = BROADWAY_GPIO_BUTTON_WPS, - .active_low = 1, - }, -#endif -}; - -static void __init broadway_init(void) -{ - rt305x_gpio_init((RT305X_GPIO_MODE_GPIO << - RT305X_GPIO_MODE_UART0_SHIFT)); - - rt305x_register_flash(0); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; - rt305x_register_ethernet(); - - ramips_register_gpio_leds(-1, ARRAY_SIZE(broadway_leds_gpio), - broadway_leds_gpio); - ramips_register_gpio_buttons(-1, BROADWAY_KEYS_POLL_INTERVAL, - ARRAY_SIZE(broadway_gpio_buttons), - broadway_gpio_buttons); - - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_BROADWAY, "BROADWAY", "Hauppauge Broadway", - broadway_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-carambola.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-carambola.c deleted file mode 100644 index c24527a7ba..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-carambola.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * 8devices Carambola dev board support - * - * Copyright (C) 2012 Tobias Diedrich <ranma+openwrt@tdiedrich.de> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -static void __init carambola_init(void) -{ - /* Ugh, inverted logic... - * This actually puts the pins into GPIO mode rather I2C, SPI, ... */ - rt305x_gpio_init(RT305X_GPIO_MODE_UART0(RT305X_GPIO_MODE_GPIO) | - RT305X_GPIO_MODE_I2C | - RT305X_GPIO_MODE_SPI | - RT305X_GPIO_MODE_JTAG | - RT305X_GPIO_MODE_MDIO); - - rt305x_register_flash(0); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE; - rt305x_register_ethernet(); - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_CARAMBOLA, "CARAMBOLA", "8devices Carambola", - carambola_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dap-1350.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dap-1350.c deleted file mode 100644 index 17a49aac5a..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dap-1350.c +++ /dev/null @@ -1,95 +0,0 @@ -/* - * D-Link DAP-1350 board support - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define DAP_1350_GPIO_LED_POWER_BLUE 8 -#define DAP_1350_GPIO_LED_POWER_RED 9 -#define DAP_1350_GPIO_LED_WPS 14 - -#define DAP_1350_GPIO_BUTTON_WPS 0 /* active low */ -#define DAP_1350_GPIO_BUTTON_RESET 10 /* active low */ -#define DAP_1350_GPIO_SWITCH_MODE_AP 7 /* active low */ -#define DAP_1350_GPIO_SWITCH_MODE_RT 11 /* active low */ - -#define DAP_1350_KEYS_POLL_INTERVAL 20 -#define DAP_1350_KEYS_DEBOUNCE_INTERVAL (3 * DAP_1350_KEYS_POLL_INTERVAL) - -static struct gpio_led dap_1350_leds_gpio[] __initdata = { - { - .name = "d-link:blue:power", - .gpio = DAP_1350_GPIO_LED_POWER_BLUE, - .active_low = 1, - }, { - .name = "d-link:red:power", - .gpio = DAP_1350_GPIO_LED_POWER_RED, - .active_low = 1, - }, { - .name = "d-link:blue:wps", - .gpio = DAP_1350_GPIO_LED_WPS, - .active_low = 1, - } -}; - -static struct gpio_keys_button dap_1350_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DAP_1350_KEYS_DEBOUNCE_INTERVAL, - .gpio = DAP_1350_GPIO_BUTTON_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DAP_1350_KEYS_DEBOUNCE_INTERVAL, - .gpio = DAP_1350_GPIO_BUTTON_WPS, - .active_low = 1, - }, { - .desc = "rt", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = DAP_1350_KEYS_DEBOUNCE_INTERVAL, - .gpio = DAP_1350_GPIO_SWITCH_MODE_RT, - .active_low = 1, - }, { - .desc = "ap", - .type = EV_KEY, - .code = BTN_1, - .debounce_interval = DAP_1350_KEYS_DEBOUNCE_INTERVAL, - .gpio = DAP_1350_GPIO_SWITCH_MODE_AP, - .active_low = 1, - } -}; - -static void __init dap_1350_init(void) -{ - rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - - rt305x_register_flash(0); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; - rt305x_register_ethernet(); - ramips_register_gpio_leds(-1, ARRAY_SIZE(dap_1350_leds_gpio), - dap_1350_leds_gpio); - ramips_register_gpio_buttons(-1, DAP_1350_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dap_1350_gpio_buttons), - dap_1350_gpio_buttons); - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_DAP_1350, "DAP-1350", "D-Link DAP-1350", - dap_1350_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-300-revb.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-300-revb.c deleted file mode 100644 index 3ae1b7852c..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-300-revb.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - * D-Link DIR-300 rev B board support - * - * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define DIR_300B_GPIO_LED_STATUS_AMBER 8 -#define DIR_300B_GPIO_LED_STATUS_GREEN 9 -#define DIR_300B_GPIO_LED_WPS 13 -/* - * NOTE: The wan led is also connected to the switch, both - * switch and gpio must be active to make it light up - */ -#define DIR_300B_GPIO_LED_WAN_GREEN 12 -#define DIR_300B_GPIO_LED_WAN_AMBER 14 - -/* - * NOTE: the WPS led in DIR-620 consists of two antiparallel leds, - * so they can't be lit simultaneously - */ -#define DIR_620_GPIO_LED_WPS_AMBER 11 - -#define DIR_300B_GPIO_BUTTON_WPS 0 /* active low */ -#define DIR_300B_GPIO_BUTTON_RESET 10 /* active low */ - -#define DIR_300B_KEYS_POLL_INTERVAL 20 -#define DIR_300B_KEYS_DEBOUNCE_INTERVAL (3 * DIR_300B_KEYS_POLL_INTERVAL) - -static struct gpio_led dir_300b_leds_gpio[] __initdata = { - { - .name = "d-link:amber:status", - .gpio = DIR_300B_GPIO_LED_STATUS_AMBER, - .active_low = 1, - }, { - .name = "d-link:green:status", - .gpio = DIR_300B_GPIO_LED_STATUS_GREEN, - .active_low = 1, - }, { - .name = "d-link:amber:wan", - .gpio = DIR_300B_GPIO_LED_WAN_AMBER, - .active_low = 1, - }, { - .name = "d-link:green:wan", - .gpio = DIR_300B_GPIO_LED_WAN_GREEN, - .active_low = 1, - }, { - .name = "d-link:blue:wps", - .gpio = DIR_300B_GPIO_LED_WPS, - .active_low = 1, - } -}; - -static struct gpio_keys_button dir_300b_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DIR_300B_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR_300B_GPIO_BUTTON_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DIR_300B_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR_300B_GPIO_BUTTON_WPS, - .active_low = 1, - } -}; - -static struct gpio_led dir_620_leds_gpio[] __initdata = { - { - .name = "d-link:amber:status", - .gpio = DIR_300B_GPIO_LED_STATUS_AMBER, - .active_low = 1, - }, { - .name = "d-link:green:status", - .gpio = DIR_300B_GPIO_LED_STATUS_GREEN, - .active_low = 1, - }, { - .name = "d-link:amber:wan", - .gpio = DIR_300B_GPIO_LED_WAN_AMBER, - .active_low = 1, - }, { - .name = "d-link:green:wan", - .gpio = DIR_300B_GPIO_LED_WAN_GREEN, - .active_low = 1, - }, { - .name = "d-link:blue:wps", - .gpio = DIR_300B_GPIO_LED_WPS, - }, { - .name = "d-link:amber:wps", - .gpio = DIR_620_GPIO_LED_WPS_AMBER, - } -}; - -static void __init dir_common_init(void) -{ - rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - - rt305x_register_flash(0); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; - rt305x_register_ethernet(); - ramips_register_gpio_buttons(-1, DIR_300B_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dir_300b_gpio_buttons), - dir_300b_gpio_buttons); - rt305x_register_wifi(); - rt305x_register_wdt(); -} - -static void __init dir_300b_init(void) -{ - dir_common_init(); - ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_300b_leds_gpio), - dir_300b_leds_gpio); -} - -static void __init dir_620a1_init(void) -{ - dir_common_init(); - ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_620_leds_gpio), - dir_620_leds_gpio); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_DIR_300_B1, "DIR-300-B1", "D-Link DIR-300 B1", - dir_300b_init); - -MIPS_MACHINE(RAMIPS_MACH_DIR_600_B1, "DIR-600-B1", "D-Link DIR-600 B1", - dir_300b_init); - -MIPS_MACHINE(RAMIPS_MACH_DIR_600_B2, "DIR-600-B2", "D-Link DIR-600 B2", - dir_300b_init); - -MIPS_MACHINE(RAMIPS_MACH_DIR_615_D, "DIR-615-D", "D-Link DIR-615 D", - dir_300b_init); - -MIPS_MACHINE(RAMIPS_MACH_DIR_620_A1, "DIR-620-A1", "D-Link DIR-620 A1", - dir_620a1_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-615-h1.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-615-h1.c deleted file mode 100644 index dbfe4aa92f..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-dir-615-h1.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * D-Link DIR-615 H1 - * - * Copyright (C) 2012 Mikko Hissa <mikko.hissa@uta.fi> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define DIR_615_H1_GPIO_LED_WAN_AMBER 12 /* active low */ -#define DIR_615_H1_GPIO_LED_WAN_GREEN 13 /* active low */ -#define DIR_615_H1_GPIO_LED_WPS_BLUE 14 /* active low */ - -#define DIR_615_H1_GPIO_LED_STATUS_AMBER 7 -#define DIR_615_H1_GPIO_LED_STATUS_GREEN 9 - -#define DIR_615_H1_GPIO_BUTTON_RESET 10 /* active low */ -#define DIR_615_H1_GPIO_BUTTON_WPS 0 /* active low */ - -#define DIR_615_H1_KEYS_POLL_INTERVAL 20 -#define DIR_615_H1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615_H1_KEYS_POLL_INTERVAL) - -static struct gpio_led dir_615_h1_leds_gpio[] __initdata = { - { - .name = "d-link:amber:status", - .gpio = DIR_615_H1_GPIO_LED_STATUS_AMBER, - }, { - .name = "d-link:green:status", - .gpio = DIR_615_H1_GPIO_LED_STATUS_GREEN, - }, { - .name = "d-link:amber:wan", - .gpio = DIR_615_H1_GPIO_LED_WAN_AMBER, - .active_low = 1, - }, { - .name = "d-link:green:wan", - .gpio = DIR_615_H1_GPIO_LED_WAN_GREEN, - .active_low = 1, - }, { - .name = "d-link:blue:wps", - .gpio = DIR_615_H1_GPIO_LED_WPS_BLUE, - .active_low = 1, - } -}; - -static struct gpio_keys_button dir_615_h1_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DIR_615_H1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR_615_H1_GPIO_BUTTON_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DIR_615_H1_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR_615_H1_GPIO_BUTTON_WPS, - .active_low = 1, - } -}; - -const struct flash_platform_data dir615h1_flash = { - .type = "mx25l3205d", -}; - -struct spi_board_info dir615h1_spi_slave_info[] __initdata = { - { - .modalias = "m25p80", - .platform_data = &dir615h1_flash, - .irq = -1, - .max_speed_hz = 10000000, - .bus_num = 0, - .chip_select = 0, - }, -}; - -static void __init dir615h1_init(void) -{ - rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - rt305x_register_spi(dir615h1_spi_slave_info, - ARRAY_SIZE(dir615h1_spi_slave_info)); - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; - rt305x_register_ethernet(); - ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_615_h1_leds_gpio), - dir_615_h1_leds_gpio); - ramips_register_gpio_buttons(-1, DIR_615_H1_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dir_615_h1_gpio_buttons), - dir_615_h1_gpio_buttons); - rt305x_register_wifi(); - rt305x_register_wdt(); -} - -MIPS_MACHINE(RAMIPS_MACH_DIR_615_H1, "DIR-615-H1", "D-Link DIR-615 H1", - dir615h1_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-esr-9753.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-esr-9753.c deleted file mode 100644 index d5f65df5ec..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-esr-9753.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Senao / EnGenius ESR-9753 board support - * - * Copyright (C) 2011 Artur Wronowski <arteqw@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define ESR_9753_GPIO_LED_POWER 8 -#define ESR_9753_GPIO_LED_WPS 14 - -#define ESR_9753_GPIO_BUTTON_WPS 0 /* active low */ -#define ESR_9753_GPIO_BUTTON_RESET 10 /* active low */ - -#define ESR_9753_KEYS_POLL_INTERVAL 20 -#define ESR_9753_KEYS_DEBOUNCE_INTERVAL (3 * ESR_9753_KEYS_POLL_INTERVAL) - -static struct gpio_led esr_9753_leds_gpio[] __initdata = { - { - .name = "esr-9753:orange:power", - .gpio = ESR_9753_GPIO_LED_POWER, - .active_low = 1, - }, { - .name = "esr-9753:orange:wps", - .gpio = ESR_9753_GPIO_LED_WPS, - .active_low = 1, - } -}; - -static struct gpio_keys_button esr_9753_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = ESR_9753_KEYS_DEBOUNCE_INTERVAL, - .gpio = ESR_9753_GPIO_BUTTON_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = ESR_9753_KEYS_DEBOUNCE_INTERVAL, - .gpio = ESR_9753_GPIO_BUTTON_WPS, - .active_low = 1, - } -}; - -static void __init esr_9753_init(void) -{ - rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - - rt305x_register_flash(0); - - ramips_register_gpio_leds(-1, ARRAY_SIZE(esr_9753_leds_gpio), - esr_9753_leds_gpio); - - ramips_register_gpio_buttons(-1, ESR_9753_KEYS_POLL_INTERVAL, - ARRAY_SIZE(esr_9753_gpio_buttons), - esr_9753_gpio_buttons); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; - rt305x_register_ethernet(); - rt305x_register_wifi(); - rt305x_register_wdt(); -} - -MIPS_MACHINE(RAMIPS_MACH_ESR_9753, "ESR-9753", "Senao / EnGenius ESR-9753", - esr_9753_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-f5d8235-v2.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-f5d8235-v2.c deleted file mode 100644 index 073fc75a6e..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-f5d8235-v2.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - * Belkin F5D8235 v2 board support - * - * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <linux/rtl8366.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define F5D8235_V2_GPIO_LED_INTERNET_BLUE 5 -#define F5D8235_V2_GPIO_LED_INTERNET_AMBER 6 -#define F5D8235_V2_GPIO_LED_MODEM_BLUE 11 -#define F5D8235_V2_GPIO_LED_MODEM_AMBER 8 -#define F5D8235_V2_GPIO_LED_ROUTER 9 -#define F5D8235_V2_GPIO_LED_STORAGE_BLUE 23 -#define F5D8235_V2_GPIO_LED_STORAGE_AMBER 22 -#define F5D8235_V2_GPIO_LED_SECURITY_BLUE 13 -#define F5D8235_V2_GPIO_LED_SECURITY_AMBER 12 - -static struct gpio_led f5d8235v2_leds_gpio[] __initdata = { - { - .name = "f5d8235v2:blue:internet", - .gpio = F5D8235_V2_GPIO_LED_INTERNET_BLUE, - .active_low = 1, - }, { - .name = "f5d8235v2:amber:internet", - .gpio = F5D8235_V2_GPIO_LED_INTERNET_AMBER, - .active_low = 1, - }, { - .name = "f5d8235v2:blue:modem", - .gpio = F5D8235_V2_GPIO_LED_MODEM_BLUE, - .active_low = 1, - }, { - .name = "f5d8235v2:amber:modem", - .gpio = F5D8235_V2_GPIO_LED_MODEM_AMBER, - .active_low = 1, - }, { - .name = "f5d8235v2:blue:router", - .gpio = F5D8235_V2_GPIO_LED_ROUTER, - .active_low = 1, - }, { - .name = "f5d8235v2:blue:storage", - .gpio = F5D8235_V2_GPIO_LED_STORAGE_BLUE, - .active_low = 1, - }, { - .name = "f5d8235v2:amber:storage", - .gpio = F5D8235_V2_GPIO_LED_STORAGE_AMBER, - .active_low = 1, - }, { - .name = "f5d8235v2:blue:security", - .gpio = F5D8235_V2_GPIO_LED_SECURITY_BLUE, - .active_low = 1, - }, { - .name = "f5d8235v2:amber:security", - .gpio = F5D8235_V2_GPIO_LED_SECURITY_AMBER, - .active_low = 1, - } -}; - -static struct rtl8366_platform_data f5d8235v2_switch_data = { - .gpio_sda = RT305X_GPIO_I2C_SD, - .gpio_sck = RT305X_GPIO_I2C_SCLK, -}; - -static struct platform_device f5d8235v2_switch = { - .name = RTL8366RB_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &f5d8235v2_switch_data, - } -}; - -static void __init f5d8235v2_init(void) -{ - rt305x_gpio_init((RT305X_GPIO_MODE_GPIO << - RT305X_GPIO_MODE_UART0_SHIFT) | - RT305X_GPIO_MODE_I2C | - RT305X_GPIO_MODE_SPI | - RT305X_GPIO_MODE_MDIO); - - rt305x_register_flash(0); - - ramips_register_gpio_leds(-1, ARRAY_SIZE(f5d8235v2_leds_gpio), - f5d8235v2_leds_gpio); - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE; - rt305x_register_ethernet(); - platform_device_register(&f5d8235v2_switch); - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_F5D8235_V2, "F5D8235_V2", "Belkin F5D8235 v2", - f5d8235v2_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-fonera20n.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-fonera20n.c deleted file mode 100644 index a433e40e91..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-fonera20n.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * La Fonera20N board support - * - * Copyright (C) 2009 John Crispin <blogic@openwrt.org> - * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define FONERA20N_GPIO_BUTTON_RESET 12 -#define FONERA20N_GPIO_SWITCH 13 -#define FONERA20N_GPIO_LED_WIFI 7 -#define FONERA20N_GPIO_LED_POWER 9 -#define FONERA20N_GPIO_LED_USB 14 - -#define FONERA20N_KEYS_POLL_INTERVAL 20 -#define FONERA20N_KEYS_DEBOUNCE_INTERVAL (3 * FONERA20N_KEYS_POLL_INTERVAL) - -static struct gpio_led fonera20n_leds_gpio[] __initdata = { - { - .name = "fonera20n:orange:wifi", - .gpio = FONERA20N_GPIO_LED_WIFI, - .active_low = 1, - }, { - .name = "fonera20n:green:power", - .gpio = FONERA20N_GPIO_LED_POWER, - .active_low = 1, - }, { - .name = "fonera20n:orange:usb", - .gpio = FONERA20N_GPIO_LED_USB, - .active_low = 1, - } -}; - -static struct gpio_keys_button fonera20n_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = FONERA20N_KEYS_DEBOUNCE_INTERVAL, - .gpio = FONERA20N_GPIO_BUTTON_RESET, - .active_low = 1, - }, { - .desc = "switch", - .type = EV_KEY, - .code = BTN_1, - .debounce_interval = FONERA20N_KEYS_DEBOUNCE_INTERVAL, - .gpio = FONERA20N_GPIO_SWITCH, - .active_low = 1, - } -}; - -static void __init fonera20n_init(void) -{ - rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - - rt305x_register_flash(0); - - ramips_register_gpio_leds(-1, ARRAY_SIZE(fonera20n_leds_gpio), - fonera20n_leds_gpio); - - ramips_register_gpio_buttons(-1, FONERA20N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(fonera20n_gpio_buttons), - fonera20n_gpio_buttons); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; - rt305x_register_ethernet(); - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_FONERA20N, "FONERA20N", "La Fonera 2.0N", - fonera20n_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-freestation5.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-freestation5.c deleted file mode 100644 index b868244cca..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-freestation5.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * ARC FreeStation2/5 board support - * - * Copyright (C) 2009 John Crispin <blogic@openwrt.org> - * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2012 Pau Escrich <p4u@dabax.net> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -static void __init freestation5_init(void) -{ - rt305x_register_flash(0); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; - rt305x_register_ethernet(); - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_FREESTATION5, "FREESTATION5", "ARC FreeStation5", - freestation5_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-hw550-3g.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-hw550-3g.c deleted file mode 100644 index b274b917da..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-hw550-3g.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Aztech HW550-3G board support - * - * Copyright (C) 2011 Layne Edwards <ledwards76@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define HW550_3G_GPIO_LED_USB 8 -#define HW550_3G_GPIO_LED_3G 11 -#define HW550_3G_GPIO_LED_STATUS 12 -#define HW550_3G_GPIO_LED_WPS 14 - -#define HW550_3G_GPIO_BUTTON_RESET 10 -#define HW550_3G_GPIO_BUTTON_CONNECT 7 -#define HW550_3G_GPIO_BUTTON_WPS 0 - -#define HW550_3G_KEYS_POLL_INTERVAL 20 -#define HW550_3G_KEYS_DEBOUNCE_INTERVAL (3 * HW550_3G_KEYS_POLL_INTERVAL) - -static struct gpio_led hw550_3g_leds_gpio[] __initdata = { - { - .name = "hw550-3g:green:usb", - .gpio = HW550_3G_GPIO_LED_USB, - .active_low = 1, - }, { - .name = "hw550-3g:green:3g", - .gpio = HW550_3G_GPIO_LED_3G, - .active_low = 1, - }, { - .name = "hw550-3g:green:status", - .gpio = HW550_3G_GPIO_LED_STATUS, - .active_low = 1, - }, { - .name = "hw550-3g:green:wps", - .gpio = HW550_3G_GPIO_LED_WPS, - .active_low = 1, - } -}; - -static struct gpio_keys_button hw550_3g_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = HW550_3G_KEYS_DEBOUNCE_INTERVAL, - .gpio = HW550_3G_GPIO_BUTTON_RESET, - .active_low = 1, - }, { - .desc = "connect", - .type = EV_KEY, - .code = KEY_CONNECT, - .debounce_interval = HW550_3G_KEYS_DEBOUNCE_INTERVAL, - .gpio = HW550_3G_GPIO_BUTTON_CONNECT, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = HW550_3G_KEYS_DEBOUNCE_INTERVAL, - .gpio = HW550_3G_GPIO_BUTTON_WPS, - .active_low = 1, - } -}; - -#define HW550_3G_GPIO_MODE \ - ((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \ - RT305X_GPIO_MODE_MDIO) - -static void __init hw550_3g_init(void) -{ - rt305x_gpio_init(HW550_3G_GPIO_MODE); - - rt305x_register_flash(0); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; - rt305x_register_ethernet(); - ramips_register_gpio_leds(-1, ARRAY_SIZE(hw550_3g_leds_gpio), - hw550_3g_leds_gpio); - ramips_register_gpio_buttons(-1, HW550_3G_KEYS_POLL_INTERVAL, - ARRAY_SIZE(hw550_3g_gpio_buttons), - hw550_3g_gpio_buttons); - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_HW550_3G, "HW550-3G", "Aztech HW550-3G", - hw550_3g_init); - -MIPS_MACHINE(RAMIPS_MACH_ALL0239_3G, "ALL0239-3G", "Allnet ALL0239-3G", - hw550_3g_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-mofi3500-3gn.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-mofi3500-3gn.c deleted file mode 100644 index 38d217a4ff..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-mofi3500-3gn.c +++ /dev/null @@ -1,102 +0,0 @@ -/* - * MoFi Network MOFI3500-3GN board support - * - * Copyright (C) 2011 Layne Edwards <ledwards76@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define MOFI3500_3GN_GPIO_LED_USB 8 -#define MOFI3500_3GN_GPIO_LED_3G 11 -#define MOFI3500_3GN_GPIO_LED_STATUS 12 -#define MOFI3500_3GN_GPIO_LED_WPS 14 - -#define MOFI3500_3GN_GPIO_BUTTON_RESET 10 -#define MOFI3500_3GN_GPIO_BUTTON_CONNECT 7 -#define MOFI3500_3GN_GPIO_BUTTON_WPS 0 - -#define MOFI3500_3GN_KEYS_POLL_INTERVAL 20 -#define MOFI3500_3GN_KEYS_DEBOUNCE_INTERVAL (3 * MOFI3500_3GN_KEYS_POLL_INTERVAL) - -static struct gpio_led mofi3500_3gn_leds_gpio[] __initdata = { - { - .name = "mofi3500-3gn:green:usb", - .gpio = MOFI3500_3GN_GPIO_LED_USB, - .active_low = 1, - }, { - .name = "mofi3500-3gn:green:3g", - .gpio = MOFI3500_3GN_GPIO_LED_3G, - .active_low = 1, - }, { - .name = "mofi3500-3gn:green:status", - .gpio = MOFI3500_3GN_GPIO_LED_STATUS, - .active_low = 1, - }, { - .name = "mofi3500-3gn:green:wps", - .gpio = MOFI3500_3GN_GPIO_LED_WPS, - .active_low = 1, - } -}; - -static struct gpio_keys_button mofi3500_3gn_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = MOFI3500_3GN_KEYS_DEBOUNCE_INTERVAL, - .gpio = MOFI3500_3GN_GPIO_BUTTON_RESET, - .active_low = 1, - }, { - .desc = "connect", - .type = EV_KEY, - .code = KEY_CONNECT, - .debounce_interval = MOFI3500_3GN_KEYS_DEBOUNCE_INTERVAL, - .gpio = MOFI3500_3GN_GPIO_BUTTON_CONNECT, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = MOFI3500_3GN_KEYS_DEBOUNCE_INTERVAL, - .gpio = MOFI3500_3GN_GPIO_BUTTON_WPS, - .active_low = 1, - } -}; - -#define MOFI3500_3GN_GPIO_MODE \ - ((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \ - RT305X_GPIO_MODE_MDIO) - -static void __init mofi3500_3gn_init(void) -{ - rt305x_gpio_init(MOFI3500_3GN_GPIO_MODE); - - rt305x_register_flash(0); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; - rt305x_register_ethernet(); - ramips_register_gpio_leds(-1, ARRAY_SIZE(mofi3500_3gn_leds_gpio), - mofi3500_3gn_leds_gpio); - ramips_register_gpio_buttons(-1, MOFI3500_3GN_KEYS_POLL_INTERVAL, - ARRAY_SIZE(mofi3500_3gn_gpio_buttons), - mofi3500_3gn_gpio_buttons); - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_MOFI3500_3GN, "MOFI3500-3GN", "MoFi Network MOFI3500-3GN", - mofi3500_3gn_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-mzk-w300nh2.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-mzk-w300nh2.c deleted file mode 100644 index 01cabbc0bf..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-mzk-w300nh2.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * Planex MZK-W300NH2 board support - * - * Copyright (C) 2012 Samir Ibradžić <sibradzic@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define MZKW300NH2_GPIO_BUTTON_RESET 0 /* active low */ -#define MZKW300NH2_GPIO_BUTTON_WPS 12 /* active low */ -#define MZKW300NH2_GPIO_SWITCH_MODE_RT 13 /* active low */ - -#define MZKW300NH2_GPIO_LED_POWER 9 -#define MZKW300NH2_GPIO_LED_WLAN 14 -#define MZKW300NH2_GPIO_LED_WPS 11 - -#define MZKW300NH2_KEYS_POLL_INTERVAL 20 -#define MZKW300NH2_KEYS_DEBOUNCE_INTERVAL (3 * MZKW300NH2_KEYS_POLL_INTERVAL) - -static struct gpio_led mzkw300nh2_leds_gpio[] __initdata = { - { - .name = "mzkw300nh2:green:power", - .gpio = MZKW300NH2_GPIO_LED_POWER, - .active_low = 1, - }, { - .name = "mzkw300nh2:amber:wlan", - .gpio = MZKW300NH2_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "mzkw300nh2:amber:wps", - .gpio = MZKW300NH2_GPIO_LED_WPS, - .active_low = 1, - } -}; - -static struct gpio_keys_button mzkw300nh2_gpio_buttons[] __initdata = { - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = MZKW300NH2_KEYS_DEBOUNCE_INTERVAL, - .gpio = MZKW300NH2_GPIO_BUTTON_WPS, - .active_low = 1, - }, { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = MZKW300NH2_KEYS_DEBOUNCE_INTERVAL, - .gpio = MZKW300NH2_GPIO_BUTTON_RESET, - .active_low = 1, - }, { - .desc = "rt", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = MZKW300NH2_KEYS_DEBOUNCE_INTERVAL, - .gpio = MZKW300NH2_GPIO_SWITCH_MODE_RT, - .active_low = 1, - } -}; - -static void __init mzkw300nh2_init(void) -{ - rt305x_gpio_init(RT305X_GPIO_MODE_UART0(RT305X_GPIO_MODE_GPIO) | - RT305X_GPIO_MODE_I2C | - RT305X_GPIO_MODE_SPI | - RT305X_GPIO_MODE_JTAG); - - rt305x_register_flash(0); - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; - rt305x_register_ethernet(); - ramips_register_gpio_leds(-1, ARRAY_SIZE(mzkw300nh2_leds_gpio), - mzkw300nh2_leds_gpio); - ramips_register_gpio_buttons(-1, MZKW300NH2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(mzkw300nh2_gpio_buttons), - mzkw300nh2_gpio_buttons); - rt305x_register_wifi(); - rt305x_register_wdt(); -} - -MIPS_MACHINE(RAMIPS_MACH_MZKW300NH2, "MZK-W300NH2", "Planex MZK-W300NH2", - mzkw300nh2_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-nbg-419n.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-nbg-419n.c deleted file mode 100644 index 856520368f..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-nbg-419n.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * ZyXEL NBG-419N board support - * - * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define NBG_419N_GPIO_LED_POWER 9 -#define NBG_419N_GPIO_LED_WPS 14 - -#define NBG_419N_GPIO_BUTTON_WPS 0 /* active low */ -#define NBG_419N_GPIO_BUTTON_RESET 10 /* active low */ - -#define NBG_419N_KEYS_POLL_INTERVAL 20 -#define NBG_419N_KEYS_DEBOUNCE_INTERVAL (3 * NBG_419N_KEYS_POLL_INTERVAL) - -static struct gpio_led nbg_419n_leds_gpio[] __initdata = { - { - .name = "nbg-419n:green:power", - .gpio = NBG_419N_GPIO_LED_POWER, - .active_low = 1, - }, { - .name = "nbg-419n:green:wps", - .gpio = NBG_419N_GPIO_LED_WPS, - .active_low = 1, - } -}; - -static struct gpio_keys_button nbg_419n_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = NBG_419N_KEYS_DEBOUNCE_INTERVAL, - .gpio = NBG_419N_GPIO_BUTTON_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = NBG_419N_KEYS_DEBOUNCE_INTERVAL, - .gpio = NBG_419N_GPIO_BUTTON_WPS, - .active_low = 1, - } -}; - -static void __init nbg_419n_init(void) -{ - rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - - rt305x_register_flash(0); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; - rt305x_register_ethernet(); - ramips_register_gpio_leds(-1, ARRAY_SIZE(nbg_419n_leds_gpio), - nbg_419n_leds_gpio); - ramips_register_gpio_buttons(-1, NBG_419N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(nbg_419n_gpio_buttons), - nbg_419n_gpio_buttons); - rt305x_register_wifi(); - rt305x_register_wdt(); -} - -MIPS_MACHINE(RAMIPS_MACH_NBG_419N, "NBG-419N", "ZyXEL NBG-419N", nbg_419n_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-nw718.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-nw718.c deleted file mode 100644 index 3c9d047908..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-nw718.c +++ /dev/null @@ -1,95 +0,0 @@ -/* - * Netcore NW718 board support - * - * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/spi/spi.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define NW718_GPIO_LED_USB 8 -#define NW718_GPIO_LED_CPU 13 -#define NW718_GPIO_LED_WPS 14 - -#define NW718_GPIO_BUTTON_WPS 0 -#define NW718_GPIO_BUTTON_RESET 10 - -#define NW718_GPIO_SPI_CS0 3 - -#define NW718_KEYS_POLL_INTERVAL 20 -#define NW718_KEYS_DEBOUNCE_INTERVAL (3 * NW718_KEYS_POLL_INTERVAL) - -static struct gpio_led nw718_leds_gpio[] __initdata = { - { - .name = "nw718:amber:cpu", - .gpio = NW718_GPIO_LED_CPU, - .active_low = 1, - }, { - .name = "nw718:amber:usb", - .gpio = NW718_GPIO_LED_USB, - .active_low = 1, - }, { - .name = "nw718:amber:wps", - .gpio = NW718_GPIO_LED_WPS, - .active_low = 1, - } -}; - -static struct gpio_keys_button nw718_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = NW718_KEYS_DEBOUNCE_INTERVAL, - .gpio = NW718_GPIO_BUTTON_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = NW718_KEYS_DEBOUNCE_INTERVAL, - .gpio = NW718_GPIO_BUTTON_WPS, - .active_low = 1, - } -}; - -static struct spi_board_info nw718_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p80", - } -}; - -static void __init nw718_init(void) -{ - rt305x_gpio_init(RT305X_GPIO_MODE_I2C | - RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; - rt305x_register_ethernet(); - ramips_register_gpio_leds(-1, ARRAY_SIZE(nw718_leds_gpio), - nw718_leds_gpio); - ramips_register_gpio_buttons(-1, NW718_KEYS_POLL_INTERVAL, - ARRAY_SIZE(nw718_gpio_buttons), - nw718_gpio_buttons); - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_spi(nw718_spi_info, ARRAY_SIZE(nw718_spi_info)); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_WHR_G300N, "NW718", "Netcore NW718", nw718_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-omni-emb.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-omni-emb.c deleted file mode 100644 index 930ac3028f..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-omni-emb.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * Omnima MiniEMBWiFi board support - * - * Copyright (C) 2011 Johnathan Boyce <jon.boyce@globalreach.eu.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define OMNI_EMB_GPIO_BUTTON_RESET 12 /* active low */ - -#define OMNI_EMB_KEYS_POLL_INTERVAL 20 -#define OMNI_EMB_KEYS_DEBOUNCE_INTERVAL (3 * OMNI_EMB_KEYS_POLL_INTERVAL) - -#define OMNI_EMB_GPIO_LED_STATUS 9 -#define OMNI_EMB_GPIO_LED_WLAN 14 - -static struct gpio_led omni_emb_leds_gpio[] __initdata = { - { - .name = "emb:green:status", - .gpio = OMNI_EMB_GPIO_LED_STATUS, - .active_low = 1, - }, { - .name = "emb:green:wlan", - .gpio = OMNI_EMB_GPIO_LED_WLAN, - .active_low = 1, - } -}; - -static struct gpio_keys_button omni_emb_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = OMNI_EMB_KEYS_DEBOUNCE_INTERVAL, - .gpio = OMNI_EMB_GPIO_BUTTON_RESET, - .active_low = 1, - } -}; - -static void __init omni_emb_init(void) -{ - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; - - rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - - ramips_register_gpio_leds(-1, ARRAY_SIZE(omni_emb_leds_gpio), - omni_emb_leds_gpio); - ramips_register_gpio_buttons(-1, OMNI_EMB_KEYS_POLL_INTERVAL, - ARRAY_SIZE(omni_emb_gpio_buttons), - omni_emb_gpio_buttons); - - rt305x_register_flash(0); - rt305x_register_ethernet(); - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_OMNI_EMB, "OMNI-EMB", "Omnima MiniEMBWiFi", - omni_emb_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-psr-680w.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-psr-680w.c deleted file mode 100644 index a6d10f7cbe..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-psr-680w.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * Petatel PSR-680W Wireless 3G Router support - * - * Copyright (C) 2012 Dmitry Shmygov <shmygov@rambler.ru> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define PSR_680W_GPIO_BUTTON_RESET 0 /* active low */ - -#define PSR_680W_GPIO_LED_STATUS 19 - -#define PSR_680W_KEYS_POLL_INTERVAL 20 -#define PSR_680W_KEYS_DEBOUNCE_INTERVAL (3 * PSR_680W_KEYS_POLL_INTERVAL) - - -static struct gpio_led psr_680w_leds_gpio[] __initdata = { - { - .name = "psr-680w:red:wan", - .gpio = PSR_680W_GPIO_LED_STATUS, - .active_low = 1, - } -}; - -static struct gpio_keys_button psr_680w_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = PSR_680W_KEYS_DEBOUNCE_INTERVAL, - .gpio = PSR_680W_GPIO_BUTTON_RESET, - .active_low = 1, - } -}; - -static void __init psr_680w_init(void) -{ - rt305x_gpio_init((RT305X_GPIO_MODE_I2S_UARTF << RT305X_GPIO_MODE_UART0_SHIFT) | - RT305X_GPIO_MODE_SPI | - RT305X_GPIO_MODE_JTAG | - RT305X_GPIO_MODE_MDIO | - RT305X_GPIO_MODE_RGMII); - - rt305x_register_flash(0); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; - rt305x_register_ethernet(); - ramips_register_gpio_leds(-1, ARRAY_SIZE(psr_680w_leds_gpio), - psr_680w_leds_gpio); - ramips_register_gpio_buttons(-1, PSR_680W_KEYS_POLL_INTERVAL, - ARRAY_SIZE(psr_680w_gpio_buttons), - psr_680w_gpio_buttons); - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_PSR_680W, "PSR-680W", - "Petatel PSR-680W Wireless 3G Router", - psr_680w_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-pwh2004.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-pwh2004.c deleted file mode 100644 index 5baf32a49a..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-pwh2004.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * Prolink PWH2004 support (or Abocom WR5205) - * - * Copyright (C) 2010 Esa Hyytia <esa@netlab.tkk.fi> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define PWH2004_GPIO_BUTTON_WPS 12 -#define PWH2004_GPIO_LED_POWER 9 -#define PWH2004_GPIO_LED_WIFI 14 -#define PWH2004_KEYS_POLL_INTERVAL 20 -#define PWH2004_KEYS_DEBOUNCE_INTERVAL (3 * PWH2004_KEYS_POLL_INTERVAL) - -static struct gpio_led pwh2004_leds_gpio[] __initdata = { - { - .name = "pwh2004:red:wifi", - .gpio = PWH2004_GPIO_LED_WIFI, - .active_low = 1, - }, { - .name = "pwh2004:green:power", - .gpio = PWH2004_GPIO_LED_POWER, - .active_low = 1, - } -}; - -static struct gpio_keys_button pwh2004_gpio_buttons[] __initdata = { - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = PWH2004_KEYS_DEBOUNCE_INTERVAL, - .gpio = PWH2004_GPIO_BUTTON_WPS, - .active_low = 1, - } -}; - -static void __init pwh2004_init(void) -{ - rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - - rt305x_register_flash(0); - - ramips_register_gpio_leds(-1, ARRAY_SIZE(pwh2004_leds_gpio), - pwh2004_leds_gpio); - ramips_register_gpio_buttons(-1, PWH2004_KEYS_POLL_INTERVAL, - ARRAY_SIZE(pwh2004_gpio_buttons), - pwh2004_gpio_buttons); - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; - rt305x_register_ethernet(); - rt305x_register_wifi(); - rt305x_register_wdt(); -} - -MIPS_MACHINE(RAMIPS_MACH_PWH2004, "PWH2004", "Prolink PWH2004", - pwh2004_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-rt-g32-revb.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-rt-g32-revb.c deleted file mode 100644 index 2f0f710874..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-rt-g32-revb.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Asus RT-G32 rev B board support - * - * Copyright (C) 2011 Sergiy <piratfm@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define RT_G32B_GPIO_BUTTON_WPS 0 /* active low */ -#define RT_G32B_GPIO_BUTTON_RESET 10 /* active low */ - -#define RT_G32B_KEYS_POLL_INTERVAL 20 -#define RT_G32B_KEYS_DEBOUNCE_INTERVAL (3 * RT_G32B_KEYS_POLL_INTERVAL) - -const struct flash_platform_data rt_g32b_flash = { - .type = "mx25l3205d", -}; - -struct spi_board_info __initdata rt_g32b_spi_slave_info[] = { - { - .modalias = "m25p80", - .platform_data = &rt_g32b_flash, - .irq = -1, - .max_speed_hz = 10000000, - .bus_num = 0, - .chip_select = 0, - }, -}; - -static struct gpio_keys_button rt_g32b_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = RT_G32B_KEYS_DEBOUNCE_INTERVAL, - .gpio = RT_G32B_GPIO_BUTTON_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = RT_G32B_KEYS_DEBOUNCE_INTERVAL, - .gpio = RT_G32B_GPIO_BUTTON_WPS, - .active_low = 1, - } -}; - -static void __init rt_g32b_init(void) -{ - rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - rt305x_register_spi(rt_g32b_spi_slave_info, - ARRAY_SIZE(rt_g32b_spi_slave_info)); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; - rt305x_register_ethernet(); - ramips_register_gpio_buttons(-1, RT_G32B_KEYS_POLL_INTERVAL, - ARRAY_SIZE(rt_g32b_gpio_buttons), - rt_g32b_gpio_buttons); - rt305x_register_wifi(); - rt305x_register_wdt(); -} - -MIPS_MACHINE(RAMIPS_MACH_RT_G32_B1, "RT-G32-B1", "Asus RT-G32 B1", - rt_g32b_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-rt-n10-plus.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-rt-n10-plus.c deleted file mode 100644 index 5b496d4eac..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-rt-n10-plus.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * ASUS RT-N10+ board support - * - * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define RT_N10_PLUS_GPIO_LED_WPS 14 - -#define RT_N10_PLUS_GPIO_BUTTON_WPS 0 /* active low */ -#define RT_N10_PLUS_GPIO_BUTTON_RESET 10 /* active low */ - -#define RT_N10_PLUS_KEYS_POLL_INTERVAL 20 -#define RT_N10_PLUS_KEYS_DEBOUNCE_INTERVAL (3 * RT_N10_PLUS_KEYS_POLL_INTERVAL) - -static struct gpio_led rt_n10_plus_leds_gpio[] __initdata = { - { - .name = "asus:green:wps", - .gpio = RT_N10_PLUS_GPIO_LED_WPS, - .active_low = 1, - } -}; - -static struct gpio_keys_button rt_n10_plus_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = RT_N10_PLUS_KEYS_DEBOUNCE_INTERVAL, - .gpio = RT_N10_PLUS_GPIO_BUTTON_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = RT_N10_PLUS_KEYS_DEBOUNCE_INTERVAL, - .gpio = RT_N10_PLUS_GPIO_BUTTON_WPS, - .active_low = 1, - } -}; - -static void __init rt_n10_plus_init(void) -{ - rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - - rt305x_register_flash(0); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; - rt305x_register_ethernet(); - ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n10_plus_leds_gpio), - rt_n10_plus_leds_gpio); - ramips_register_gpio_buttons(-1, RT_N10_PLUS_KEYS_POLL_INTERVAL, - ARRAY_SIZE(rt_n10_plus_gpio_buttons), - rt_n10_plus_gpio_buttons); - rt305x_register_wifi(); - rt305x_register_wdt(); -} - -MIPS_MACHINE(RAMIPS_MACH_RT_N10_PLUS, "RT-N10-PLUS", "Asus RT-N10+", - rt_n10_plus_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-rt-n13u.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-rt-n13u.c deleted file mode 100644 index cae857abd4..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-rt-n13u.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * ASUS RT-N13U board support - * - * Copyright (C) 2012 lintel<lintel.huang@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define RT_N13U_GPIO_BUTTON_RESET 10 -#define RT_N13U_GPIO_BUTTON_WPS 0 - -#define RT_N13U_GPIO_LED_POWER 7 -#define RT_N13U_GPIO_LED_WIFI 8 - - -#define RT_N13U_BUTTONS_POLL_INTERVAL 10 -#define RT_N13U_BUTTONS_DEBOUNCE_INTERVAL (3 * RT_N13U_BUTTONS_POLL_INTERVAL) - -static struct gpio_led rt_n13u_leds_gpio[] __initdata = { - { - .name = "rt-n13u:power", - .gpio = RT_N13U_GPIO_LED_POWER, - .active_low = 1, - }, { - .name = "rt-n13u:wifi", - .gpio = RT_N13U_GPIO_LED_WIFI, - .active_low = 1, - } -}; - -static struct gpio_keys_button rt_n13u_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = RT_N13U_BUTTONS_DEBOUNCE_INTERVAL, - .gpio = RT_N13U_GPIO_BUTTON_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = RT_N13U_BUTTONS_DEBOUNCE_INTERVAL, - .gpio = RT_N13U_GPIO_BUTTON_WPS, - .active_low = 1, - }, -}; - -static void __init rt_n13u_init(void) -{ - rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - - rt305x_register_flash(0); - - ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n13u_leds_gpio), - rt_n13u_leds_gpio); - - ramips_register_gpio_buttons(-1, RT_N13U_BUTTONS_POLL_INTERVAL, - ARRAY_SIZE(rt_n13u_gpio_buttons), - rt_n13u_gpio_buttons); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; - rt305x_register_ethernet(); - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_RT_N13U, "RT-N13U", "Asus RT-N13U", - rt_n13u_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-sl-r7205.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-sl-r7205.c deleted file mode 100644 index 31f002c9aa..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-sl-r7205.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * Skyline SL-R7205 Wireless 3G Router support - * - * Copyright (C) 2012 Haipoh Teoh <hpteoh@ceedtec.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define SL_R7205_GPIO_BUTTON_WPS 0 -#define SL_R7205_GPIO_BUTTON_RESET 10 /* active low */ - -#define SL_R7205_GPIO_LED_WIFI 7 - -#define SL_R7205_KEYS_POLL_INTERVAL 20 -#define SL_R7205_KEYS_DEBOUNCE_INTERVAL (3 * SL_R7205_KEYS_POLL_INTERVAL) - -static struct gpio_led sl_r7205_leds_gpio[] __initdata = { - { - .name = "sl-r7205:green:wifi", - .gpio = SL_R7205_GPIO_LED_WIFI, - .active_low = 1, - } -}; - -static struct gpio_keys_button sl_r7205_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = SL_R7205_KEYS_DEBOUNCE_INTERVAL, - .gpio = SL_R7205_GPIO_BUTTON_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = SL_R7205_KEYS_DEBOUNCE_INTERVAL, - .gpio = SL_R7205_GPIO_BUTTON_WPS, - .active_low = 1, - } -}; - -static void __init sl_r7205_init(void) -{ - rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - - rt305x_register_flash(0); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; - rt305x_register_ethernet(); - ramips_register_gpio_leds(-1, ARRAY_SIZE(sl_r7205_leds_gpio), - sl_r7205_leds_gpio); - ramips_register_gpio_buttons(-1, SL_R7205_KEYS_POLL_INTERVAL, - ARRAY_SIZE(sl_r7205_gpio_buttons), - sl_r7205_gpio_buttons); - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_SL_R7205, "SL-R7205", - "Skyline SL-R7205 Wireless 3G Router", - sl_r7205_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-ur-326n4g.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-ur-326n4g.c deleted file mode 100644 index a5296941a1..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-ur-326n4g.c +++ /dev/null @@ -1,102 +0,0 @@ -/* - * UR-326N4G board support - * - * Copyright (C) 2013 Dmitry Lebedev <Lebedev@upvel.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - - -#define UR_326N4G_GPIO_LED_3G 9 -#define UR_326N4G_GPIO_LED_GATEWAY 11 -#define UR_326N4G_GPIO_LED_AP 12 -#define UR_326N4G_GPIO_LED_STATION 13 -#define UR_326N4G_GPIO_LED_WPS 14 - -#define UR_326N4G_GPIO_BUTTON_RESET 10 -#define UR_326N4G_GPIO_BUTTON_CONNECT 7 -#define UR_326N4G_GPIO_BUTTON_WPS 0 -#define UR_326N4G_GPIO_BUTTON_WPS2 8 - -#define UR_326N4G_KEYS_POLL_INTERVAL 20 -#define UR_326N4G_KEYS_DEBOUNCE_INTERVAL (3 * UR_326N4G_KEYS_POLL_INTERVAL) - -static struct gpio_led UR_326N4G_leds_gpio[] __initdata = { - { - .name = "ur326:green:3g", - .gpio = UR_326N4G_GPIO_LED_3G, - .active_low = 1, - }, { - .name = "ur326:green:gateway", - .gpio = UR_326N4G_GPIO_LED_GATEWAY, - .active_low = 1, - }, { - .name = "ur326:green:ap", - .gpio = UR_326N4G_GPIO_LED_AP, - .active_low = 1, - }, { - .name = "ur326:green:wps", - .gpio = UR_326N4G_GPIO_LED_WPS, - .active_low = 1, - }, { - .name = "ur326:green:station", - .gpio = UR_326N4G_GPIO_LED_STATION, - .active_low = 1, - } -}; - -static struct gpio_keys_button UR_326N4G_gpio_buttons[] __initdata = { - { - .desc = "reset_wps", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = UR_326N4G_KEYS_DEBOUNCE_INTERVAL, - .gpio = UR_326N4G_GPIO_BUTTON_RESET, - .active_low = 1, - }, { - .desc = "mode", - .type = EV_KEY, - .code = KEY_M, - .debounce_interval = UR_326N4G_KEYS_DEBOUNCE_INTERVAL, - .gpio = UR_326N4G_GPIO_BUTTON_CONNECT, - .active_low = 1, - } -}; - -#define UR_326N4G_GPIO_MODE \ - ((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \ - RT305X_GPIO_MODE_MDIO) - -static void __init UR_326N4G_init(void) -{ - rt305x_gpio_init(UR_326N4G_GPIO_MODE); - - rt305x_register_flash(0); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; - rt305x_register_ethernet(); - ramips_register_gpio_leds(-1, ARRAY_SIZE(UR_326N4G_leds_gpio), - UR_326N4G_leds_gpio); - ramips_register_gpio_buttons(-1, UR_326N4G_KEYS_POLL_INTERVAL, - ARRAY_SIZE(UR_326N4G_gpio_buttons), - UR_326N4G_gpio_buttons); - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_UR_326N4G, "UR-326N4G", "UR-326N4G Wireless N router", - UR_326N4G_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-ur-336un.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-ur-336un.c deleted file mode 100644 index 0ff264957a..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-ur-336un.c +++ /dev/null @@ -1,92 +0,0 @@ -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - - -#define UR_336UN_GPIO_LED_3G 9 -#define UR_336UN_GPIO_LED_GATEWAY 11 -#define UR_336UN_GPIO_LED_AP 12 -#define UR_336UN_GPIO_LED_STATION 13 -#define UR_336UN_GPIO_LED_WPS 14 - -#define UR_336UN_GPIO_BUTTON_RESET 10 -#define UR_336UN_GPIO_BUTTON_CONNECT 7 -#define UR_336UN_GPIO_BUTTON_WPS 0 -#define UR_336UN_GPIO_BUTTON_WPS2 8 - -#define UR_336UN_KEYS_POLL_INTERVAL 20 -#define UR_336UN_KEYS_DEBOUNCE_INTERVAL (3 * UR_336UN_KEYS_POLL_INTERVAL) - -static struct gpio_led UR_336UN_leds_gpio[] __initdata = { - { - .name = "ur336:green:3g", - .gpio = UR_336UN_GPIO_LED_3G, - .active_low = 1, - }, { - .name = "ur336:green:gateway", - .gpio = UR_336UN_GPIO_LED_GATEWAY, - .active_low = 1, - }, { - .name = "ur336:green:ap", - .gpio = UR_336UN_GPIO_LED_AP, - .active_low = 1, - }, { - .name = "ur336:green:wps", - .gpio = UR_336UN_GPIO_LED_WPS, - .active_low = 1, - }, { - .name = "ur336:green:station", - .gpio = UR_336UN_GPIO_LED_STATION, - .active_low = 1, - } -}; - -static struct gpio_keys_button UR_336UN_gpio_buttons[] __initdata = { - { - .desc = "reset_wps", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = UR_336UN_KEYS_DEBOUNCE_INTERVAL, - .gpio = UR_336UN_GPIO_BUTTON_RESET, - .active_low = 1, - }, { - .desc = "mode", - .type = EV_KEY, - .code = KEY_M, - .debounce_interval = UR_336UN_KEYS_DEBOUNCE_INTERVAL, - .gpio = UR_336UN_GPIO_BUTTON_CONNECT, - .active_low = 1, - } -}; - -#define UR_336UN_GPIO_MODE \ - ((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \ - RT305X_GPIO_MODE_MDIO) - -static void __init UR_336UN_init(void) -{ - rt305x_gpio_init(UR_336UN_GPIO_MODE); - - rt305x_register_flash(0); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; - rt305x_register_ethernet(); - ramips_register_gpio_leds(-1, ARRAY_SIZE(UR_336UN_leds_gpio), - UR_336UN_leds_gpio); - ramips_register_gpio_buttons(-1, UR_336UN_KEYS_POLL_INTERVAL, - ARRAY_SIZE(UR_336UN_gpio_buttons), - UR_336UN_gpio_buttons); - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_UR_336UN, "UR-336UN", "UR-336UN Wireless N router", - UR_336UN_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-v22rw-2x2.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-v22rw-2x2.c deleted file mode 100644 index 7f43dabdc4..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-v22rw-2x2.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - * Ralink AP-RT3052-V22RW-2X2 board support - * - * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define V22RW_2X2_GPIO_BUTTON_WPS 0 -#define V22RW_2X2_GPIO_BUTTON_SWRST 10 -#define V22RW_2X2_GPIO_LED_SECURITY 13 -#define V22RW_2X2_GPIO_LED_WPS 14 - -#define V22RW_2X2_KEYS_POLL_INTERVAL 20 -#define V22RW_2X2_KEYS_DEBOUNCE_INTERVAL (3 * V22RW_2X2_KEYS_POLL_INTERVAL) - -static struct gpio_led v22rw_2x2_leds_gpio[] __initdata = { - { - .name = "v22rw-2x2:green:security", - .gpio = V22RW_2X2_GPIO_LED_SECURITY, - .active_low = 1, - }, { - .name = "v22rw-2x2:red:wps", - .gpio = V22RW_2X2_GPIO_LED_WPS, - .active_low = 1, - } -}; - -static struct gpio_keys_button v22rw_2x2_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = V22RW_2X2_KEYS_DEBOUNCE_INTERVAL, - .gpio = V22RW_2X2_GPIO_BUTTON_SWRST, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = V22RW_2X2_KEYS_DEBOUNCE_INTERVAL, - .gpio = V22RW_2X2_GPIO_BUTTON_WPS, - .active_low = 1, - } -}; - -static void __init v22rw_2x2_init(void) -{ - rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - - rt305x_register_flash(0); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; - rt305x_register_ethernet(); - ramips_register_gpio_leds(-1, ARRAY_SIZE(v22rw_2x2_leds_gpio), - v22rw_2x2_leds_gpio); - ramips_register_gpio_buttons(-1, V22RW_2X2_KEYS_POLL_INTERVAL, - ARRAY_SIZE(v22rw_2x2_gpio_buttons), - v22rw_2x2_gpio_buttons); - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_V22RW_2X2, "V22RW-2X2", "Ralink AP-RT3052-V22RW-2X2", - v22rw_2x2_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w306r-v20.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w306r-v20.c deleted file mode 100644 index 7c8eb867cd..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w306r-v20.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - * Tenda W306R V2.0 board support - * - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ethtool.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> -#include <asm/mach-ralink/ramips_eth_platform.h> - -#include "devices.h" - -#define W306R_V20_GPIO_LED_SYS 9 -#define W306R_V20_GPIO_LED_WPS 13 - -#define W306R_V20_GPIO_BUTTON_RESET 10 - -#define W306R_V20_KEYS_POLL_INTERVAL 20 -#define W306R_V20_KEYS_DEBOUNCE_INTERVAL (3 * W306R_V20_KEYS_POLL_INTERVAL) - -static struct gpio_led w306r_v20_leds_gpio[] __initdata = { - { - .name = "w306r-v20:green:sys", - .gpio = W306R_V20_GPIO_LED_SYS, - .active_low = 1, - }, { - .name = "w306r-v20:green:wps", - .gpio = W306R_V20_GPIO_LED_WPS, - .active_low = 1, - } -}; - -static struct gpio_keys_button w306r_v20_gpio_buttons[] __initdata = { - { - .desc = "RESET/WPS", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = W306R_V20_KEYS_DEBOUNCE_INTERVAL, - .gpio = W306R_V20_GPIO_BUTTON_RESET, - .active_low = 1, - } -}; - -static void __init w306r_v20_init(void) -{ - rt305x_register_flash(0); - - rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; - rt305x_register_ethernet(); - ramips_register_gpio_leds(-1, ARRAY_SIZE(w306r_v20_leds_gpio), - w306r_v20_leds_gpio); - ramips_register_gpio_buttons(-1, W306R_V20_KEYS_POLL_INTERVAL, - ARRAY_SIZE(w306r_v20_gpio_buttons), - w306r_v20_gpio_buttons); - rt305x_register_wifi(); - rt305x_register_wdt(); -} - -MIPS_MACHINE(RAMIPS_MACH_W306R_V20, "W306R_V20", "Tenda W306R V2.0", - w306r_v20_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w502u.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w502u.c deleted file mode 100644 index 6633ca0288..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-w502u.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * ALFA Networks W502U board support - * - * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define W502U_GPIO_LED_USB 13 -#define W502U_GPIO_LED_WPS 14 - -#define W502U_GPIO_BUTTON_WPS 0 -#define W502U_GPIO_BUTTON_RESET 10 - -#define W502U_KEYS_POLL_INTERVAL 20 -#define W502U_KEYS_DEBOUNCE_INTERVAL (3 * W502U_KEYS_POLL_INTERVAL) - -static struct gpio_led w502u_leds_gpio[] __initdata = { - { - .name = "alfa:blue:usb", - .gpio = W502U_GPIO_LED_USB, - .active_low = 1, - }, - { - .name = "alfa:blue:wps", - .gpio = W502U_GPIO_LED_WPS, - .active_low = 1, - }, -}; - -static struct gpio_keys_button w502u_gpio_buttons[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = W502U_KEYS_DEBOUNCE_INTERVAL, - .gpio = W502U_GPIO_BUTTON_RESET, - .active_low = 1, - }, - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = W502U_KEYS_DEBOUNCE_INTERVAL, - .gpio = W502U_GPIO_BUTTON_WPS, - .active_low = 1, - }, -}; - -static void __init w502u_init(void) -{ - rt305x_gpio_init((RT305X_GPIO_MODE_GPIO << - RT305X_GPIO_MODE_UART0_SHIFT)); - - rt305x_register_flash(0); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; - rt305x_register_ethernet(); - ramips_register_gpio_leds(-1, ARRAY_SIZE(w502u_leds_gpio), - w502u_leds_gpio); - ramips_register_gpio_buttons(-1, W502U_KEYS_POLL_INTERVAL, - ARRAY_SIZE(w502u_gpio_buttons), - w502u_gpio_buttons); - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_W502U, "W502U", "ALFA Networks W502U", - w502u_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wcr150gn.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wcr150gn.c deleted file mode 100644 index dec1a7bb5b..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wcr150gn.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * Sparklan WCR-150GN board support - * - * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define WCR150GN_GPIO_LED_USER 12 -#define WCR150GN_GPIO_LED_POWER 8 -#define WCR150GN_GPIO_BUTTON_WPS 10 -#define WCR150GN_GPIO_BUTTON_RESET 0 -#define WCR150GN_KEYS_POLL_INTERVAL 20 -#define WCR150GN_KEYS_DEBOUNCE_INTERVAL (3 * WCR150GN_KEYS_POLL_INTERVAL) - -static struct gpio_led wcr150gn_leds_gpio[] __initdata = { - { - .name = "wcr150gn:amber:user", - .gpio = WCR150GN_GPIO_LED_USER, - .active_low = 1, - }, - { - .name = "wcr150gn:amber:power", - .gpio = WCR150GN_GPIO_LED_POWER, - .active_low = 1, - } -}; - -static struct gpio_keys_button wcr150gn_gpio_buttons[] __initdata = { - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WCR150GN_KEYS_DEBOUNCE_INTERVAL, - .gpio = WCR150GN_GPIO_BUTTON_WPS, - .active_low = 1, - }, - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WCR150GN_KEYS_DEBOUNCE_INTERVAL, - .gpio = WCR150GN_GPIO_BUTTON_RESET, - .active_low = 1, - } -}; - -static void __init wcr150gn_init(void) -{ - rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - - rt305x_register_flash(0); - - ramips_register_gpio_leds(-1, ARRAY_SIZE(wcr150gn_leds_gpio), - wcr150gn_leds_gpio); - ramips_register_gpio_buttons(-1, WCR150GN_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wcr150gn_gpio_buttons), - wcr150gn_gpio_buttons); - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; - rt305x_register_ethernet(); - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_WCR150GN, "WCR150GN", "Sparklan WCR-150GN", - wcr150gn_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-whr-g300n.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-whr-g300n.c deleted file mode 100644 index e5adb1909f..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-whr-g300n.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * Buffalo WHR-G300N board support - * - * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define WHR_G300N_GPIO_LED_DIAG 7 -#define WHR_G300N_GPIO_LED_ROUTER 9 -#define WHR_G300N_GPIO_LED_SECURITY 14 - -#define WHR_G300N_GPIO_BUTTON_AOSS 0 /* active low */ -#define WHR_G300N_GPIO_BUTTON_RESET 10 /* active low */ -#define WHR_G300N_GPIO_BUTTON_ROUTER_ON 8 /* active low */ -#define WHR_G300N_GPIO_BUTTON_ROUTER_OFF 11 /* active low */ - -#define WHR_G300N_KEYS_POLL_INTERVAL 20 -#define WHR_G300N_KEYS_DEBOUNCE_INTERVAL (3 * WHR_G300N_KEYS_POLL_INTERVAL) - -static struct gpio_led whr_g300n_leds_gpio[] __initdata = { - { - .name = "whr-g300n:red:diag", - .gpio = WHR_G300N_GPIO_LED_DIAG, - .active_low = 1, - }, { - .name = "whr-g300n:green:router", - .gpio = WHR_G300N_GPIO_LED_ROUTER, - .active_low = 1, - }, { - .name = "whr-g300n:amber:security", - .gpio = WHR_G300N_GPIO_LED_SECURITY, - .active_low = 1, - } -}; - -static struct gpio_keys_button whr_g300n_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WHR_G300N_KEYS_DEBOUNCE_INTERVAL, - .gpio = WHR_G300N_GPIO_BUTTON_RESET, - .active_low = 1, - }, { - .desc = "aoss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WHR_G300N_KEYS_DEBOUNCE_INTERVAL, - .gpio = WHR_G300N_GPIO_BUTTON_AOSS, - .active_low = 1, - }, { - .desc = "router-off", - .type = EV_KEY, - .code = BTN_2, - .debounce_interval = WHR_G300N_KEYS_DEBOUNCE_INTERVAL, - .gpio = WHR_G300N_GPIO_BUTTON_ROUTER_OFF, - .active_low = 1, - }, { - .desc = "router-on", - .type = EV_KEY, - .code = BTN_3, - .debounce_interval = WHR_G300N_KEYS_DEBOUNCE_INTERVAL, - .gpio = WHR_G300N_GPIO_BUTTON_ROUTER_ON, - .active_low = 1, - } -}; - -static void __init whr_g300n_init(void) -{ - rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - - rt305x_register_flash(0); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; - rt305x_register_ethernet(); - ramips_register_gpio_leds(-1, ARRAY_SIZE(whr_g300n_leds_gpio), - whr_g300n_leds_gpio); - ramips_register_gpio_buttons(-1, WHR_G300N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(whr_g300n_gpio_buttons), - whr_g300n_gpio_buttons); - rt305x_register_wifi(); - rt305x_register_wdt(); -} - -MIPS_MACHINE(RAMIPS_MACH_WHR_G300N, "WHR-G300N", "Buffalo WHR-G300N", - whr_g300n_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl-330n.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl-330n.c deleted file mode 100644 index b548dfee1d..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl-330n.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * Asus WL_330N board support - * - * Copyright (C) 2012 Frederic Leroy <fredo@starox.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define WL_330N_GPIO_BUTTON_RESET 10 -#define WL_330N_GPIO_BUTTON_WPS 0 -#define WL_330N_GPIO_LED_LINK 9 -#define WL_330N_GPIO_LED_POWER 11 -#define WL_330N_KEYS_POLL_INTERVAL 20 -#define WL_330N_KEYS_DEBOUNCE_INTERVAL (3 * WL_330N_KEYS_POLL_INTERVAL) - -const struct flash_platform_data wl_330n_flash = { - .type = "mx25l3205d", -}; - -struct spi_board_info wl_330n_spi_slave_info[] __initdata = { - { - .modalias = "m25p80", - .platform_data = &wl_330n_flash, - .irq = -1, - .max_speed_hz = 10000000, - .bus_num = 0, - .chip_select = 0, - }, -}; - -static struct gpio_keys_button wl_330n_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WL_330N_KEYS_DEBOUNCE_INTERVAL, - .gpio = WL_330N_GPIO_BUTTON_RESET, - .active_low = 1, - }, - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WL_330N_KEYS_DEBOUNCE_INTERVAL, - .gpio = WL_330N_GPIO_BUTTON_WPS, - .active_low = 1, - } -}; - -static struct gpio_led wl_330n_leds_gpio[] __initdata = { - { - .name = "asus:blue:link", - .gpio = WL_330N_GPIO_LED_LINK, - .active_low = 1, - }, { - .name = "asus:blue:power", - .gpio = WL_330N_GPIO_LED_POWER, - .active_low = 1, - } -}; - -static void __init wl_330n_init(void) -{ - rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - rt305x_register_spi(wl_330n_spi_slave_info, - ARRAY_SIZE(wl_330n_spi_slave_info)); - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; - rt305x_register_ethernet(); - ramips_register_gpio_leds(-1, ARRAY_SIZE(wl_330n_leds_gpio), - wl_330n_leds_gpio); - ramips_register_gpio_buttons(-1, WL_330N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wl_330n_gpio_buttons), - wl_330n_gpio_buttons); - rt305x_register_wifi(); - rt305x_register_wdt(); -} - -MIPS_MACHINE(RAMIPS_MACH_WL_330N, "WL_330N", "Asus WL-330N", - wl_330n_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl-330n3g.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl-330n3g.c deleted file mode 100644 index 599b9a9adb..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl-330n3g.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * Asus WL_330N3G board support - * - * Copyright (C) 2012 Frederic Leroy <fredo@starox.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define WL_330N3G_GPIO_BUTTON_RESET 10 -#define WL_330N3G_GPIO_BUTTON_WPS 0 -#define WL_330N3G_GPIO_LED_3G_BLUE 9 -#define WL_330N3G_GPIO_LED_3G_RED 13 -#define WL_330N3G_GPIO_LED_POWER 11 -#define WL_330N3G_KEYS_POLL_INTERVAL 20 -#define WL_330N3G_KEYS_DEBOUNCE_INTERVAL (3 * WL_330N3G_KEYS_POLL_INTERVAL) - -const struct flash_platform_data wl_330n3g_flash = { - .type = "mx25l3205d", -}; - -struct spi_board_info wl_330n3g_spi_slave_info[] __initdata = { - { - .modalias = "m25p80", - .platform_data = &wl_330n3g_flash, - .irq = -1, - .max_speed_hz = 10000000, - .bus_num = 0, - .chip_select = 0, - }, -}; - -static struct gpio_keys_button wl_330n3g_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WL_330N3G_KEYS_DEBOUNCE_INTERVAL, - .gpio = WL_330N3G_GPIO_BUTTON_RESET, - .active_low = 1, - }, - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WL_330N3G_KEYS_DEBOUNCE_INTERVAL, - .gpio = WL_330N3G_GPIO_BUTTON_WPS, - .active_low = 1, - } -}; - -static struct gpio_led wl_330n3g_leds_gpio[] __initdata = { - { - .name = "asus:blue:3g", - .gpio = WL_330N3G_GPIO_LED_3G_BLUE, - .active_low = 1, - }, { - .name = "asus:red:3g", - .gpio = WL_330N3G_GPIO_LED_3G_RED, - .active_low = 1, - }, { - .name = "asus:blue:power", - .gpio = WL_330N3G_GPIO_LED_POWER, - .active_low = 1, - } -}; - -static void __init wl_330n3g_init(void) -{ - rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - rt305x_register_spi(wl_330n3g_spi_slave_info, - ARRAY_SIZE(wl_330n3g_spi_slave_info)); - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; - rt305x_register_ethernet(); - ramips_register_gpio_leds(-1, ARRAY_SIZE(wl_330n3g_leds_gpio), - wl_330n3g_leds_gpio); - ramips_register_gpio_buttons(-1, WL_330N3G_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wl_330n3g_gpio_buttons), - wl_330n3g_gpio_buttons); - rt305x_register_wifi(); - rt305x_register_usb(); - rt305x_register_wdt(); -} - -MIPS_MACHINE(RAMIPS_MACH_WL_330N3G, "WL_330N3G", "Asus WL-330N3G", - wl_330n3g_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl341v3.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl341v3.c deleted file mode 100644 index 2cd1d5e47a..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl341v3.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Sitecom WL341v3 board support - * - * Copyright (C) 2012 Marco Antonio Mauro <marcus90@gmail.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define WL341V3_GPIO_LED_FIRST_AMBER 9 -#define WL341V3_GPIO_LED_FIRST_BLUE 13 -#define WL341V3_GPIO_LED_THIRD_AMBER 11 -#define WL341V3_GPIO_LED_THIRD_BLUE 14 -#define WL341V3_GPIO_LED_FOURTH_BLUE 10 -#define WL341V3_GPIO_LED_FIFTH_AMBER 12 -#define WL341V3_GPIO_LED_FIFTH_BLUE 8 - -#define WL341V3_GPIO_BUTTON_WPS 5 /* active low */ -#define WL341V3_GPIO_BUTTON_RESET 7 /* active low */ - -#define WL341V3_KEYS_POLL_INTERVAL 20 -#define WL341V3_KEYS_DEBOUNCE_INTERVAL (3 * WL341V3_KEYS_POLL_INTERVAL) - -static struct gpio_led wl341v3_leds_gpio[] __initdata = { - { - .name = "wl341v3:amber:first", - .gpio = WL341V3_GPIO_LED_FIRST_AMBER, - .active_low = 1, - }, { - .name = "wl341v3:blue:first", - .gpio = WL341V3_GPIO_LED_FIRST_BLUE, - .active_low = 1, - }, { - .name = "wl341v3:amber:third", - .gpio = WL341V3_GPIO_LED_THIRD_AMBER, - .active_low = 1, - }, { - .name = "wl341v3:blue:third", - .gpio = WL341V3_GPIO_LED_THIRD_BLUE, - .active_low = 1, - }, { - .name = "wl341v3:blue:fourth", - .gpio = WL341V3_GPIO_LED_FOURTH_BLUE, - .active_low = 1, - }, { - .name = "wl341v3:amber:fifth", - .gpio = WL341V3_GPIO_LED_FIFTH_AMBER, - .active_low = 1, - }, { - .name = "wl341v3:blue:fifth", - .gpio = WL341V3_GPIO_LED_FIFTH_BLUE, - .active_low = 1, - } -}; - -static struct gpio_keys_button wl341v3_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WL341V3_KEYS_DEBOUNCE_INTERVAL, - .gpio = WL341V3_GPIO_BUTTON_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WL341V3_KEYS_DEBOUNCE_INTERVAL, - .gpio = WL341V3_GPIO_BUTTON_WPS, - .active_low = 1, - } -}; - -static void __init wl341v3_init(void) -{ - rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - - rt305x_register_flash(0); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; - rt305x_register_ethernet(); - ramips_register_gpio_leds(-1, ARRAY_SIZE(wl341v3_leds_gpio), - wl341v3_leds_gpio); - ramips_register_gpio_buttons(-1, WL341V3_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wl341v3_gpio_buttons), - wl341v3_gpio_buttons); - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_WL341V3, "WL341V3", "Sitecom WL-341 v3", - wl341v3_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl351.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl351.c deleted file mode 100644 index 8c0caadb1a..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl351.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * Sitecom WL-351 v1 002 board support - * - * Copyright (C) 2011 Tobias Diedrich <ranma+openwrt@tdiedrich.de> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> - -#include <linux/rtl8366.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define WL351_GPIO_LED_POWER_AMBER 8 -#define WL351_GPIO_LED_UNPOPULATED_AMBER 12 -#define WL351_GPIO_LED_UNPOPULATED_BLUE 13 - -#define WL351_GPIO_BUTTON_RESET 10 -#define WL351_GPIO_BUTTON_WPS 0 - -#define WL351_KEYS_POLL_INTERVAL 20 -#define WL351_KEYS_DEBOUNCE_INTERVAL (3 * WL351_KEYS_POLL_INTERVAL) - -static struct gpio_led wl351_leds_gpio[] __initdata = { - { - .name = "wl-351:amber:power", - .gpio = WL351_GPIO_LED_POWER_AMBER, - .active_low = 1, - }, { - .name = "wl-351:amber:unpopulated", - .gpio = WL351_GPIO_LED_UNPOPULATED_AMBER, - .active_low = 1, - }, { - .name = "wl-351:blue:unpopulated", - .gpio = WL351_GPIO_LED_UNPOPULATED_BLUE, - .active_low = 1, - } -}; - - -static struct gpio_keys_button wl351_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WL351_KEYS_DEBOUNCE_INTERVAL, - .gpio = WL351_GPIO_BUTTON_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WL351_KEYS_DEBOUNCE_INTERVAL, - .gpio = WL351_GPIO_BUTTON_WPS, - .active_low = 1, - } -}; - -static struct rtl8366_platform_data wl351_switch_data = { - .gpio_sda = RT305X_GPIO_I2C_SD, - .gpio_sck = RT305X_GPIO_I2C_SCLK, -}; - -static struct platform_device wl351_switch = { - .name = RTL8366RB_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &wl351_switch_data, - } -}; - -static void __init wl351_init(void) -{ - rt305x_gpio_init((RT305X_GPIO_MODE_GPIO << - RT305X_GPIO_MODE_UART0_SHIFT) | - RT305X_GPIO_MODE_I2C | - RT305X_GPIO_MODE_SPI | - RT305X_GPIO_MODE_MDIO); - - rt305x_register_flash(0); - - ramips_register_gpio_leds(-1, ARRAY_SIZE(wl351_leds_gpio), - wl351_leds_gpio); - ramips_register_gpio_buttons(-1, WL351_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wl351_gpio_buttons), - wl351_gpio_buttons); - /* External RTL8366RB. */ - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE; - rt305x_esw_data.reg_initval_fct2 = 0x0002500c; - /* - * ext phy base addr 31, rx/tx clock skew 0, - * turbo mii off, rgmi 3.3v off, port 5 polling off - * port5: enabled, gige, full-duplex, rx/tx-flow-control - * port6: enabled, gige, full-duplex, rx/tx-flow-control - */ - rt305x_esw_data.reg_initval_fpa2 = 0x1f003fff; - rt305x_register_ethernet(); - platform_device_register(&wl351_switch); - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_WL351, "WL-351", "Sitecom WL-351 v1 002", - wl351_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wr512-3gn.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wr512-3gn.c deleted file mode 100644 index eed752353d..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wr512-3gn.c +++ /dev/null @@ -1,110 +0,0 @@ -/* - * Unbranded router from DX board support - * Also known as *WR512*-3GN by local vendors - * e.g. WS-WR512N1, Sin Hon SH-WR512NU, and etc - * (http://www.dealextreme.com/p/portable-wireless-n-3g-router-cdma2000-evdo-td-scdma-hspa-wcdma-45639) - * This router is also known to be rebranded and sold by a number of local - * vendors in several countries. - * - * Copyright (C) 2011 Andrew Andrianov <necromant@necromant.ath.cx> - * Based on MOFI3500-3N code by - * Copyright (C) 2011 Layne Edwards <ledwards76@gmail.com> - * - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - - -#define WR512_3GN_GPIO_LED_3G 9 -#define WR512_3GN_GPIO_LED_GATEWAY 11 -#define WR512_3GN_GPIO_LED_AP 12 -#define WR512_3GN_GPIO_LED_STATION 13 -#define WR512_3GN_GPIO_LED_WPS 14 - -#define WR512_3GN_GPIO_BUTTON_RESET 10 -#define WR512_3GN_GPIO_BUTTON_CONNECT 7 -#define WR512_3GN_GPIO_BUTTON_WPS 0 -#define WR512_3GN_GPIO_BUTTON_WPS2 8 - -#define WR512_3GN_KEYS_POLL_INTERVAL 20 -#define WR512_3GN_KEYS_DEBOUNCE_INTERVAL (3 * WR512_3GN_KEYS_POLL_INTERVAL) - -static struct gpio_led wr512_3gn_leds_gpio[] __initdata = { - { - .name = "wr512:green:3g", - .gpio = WR512_3GN_GPIO_LED_3G, - .active_low = 1, - }, { - .name = "wr512:green:gateway", - .gpio = WR512_3GN_GPIO_LED_GATEWAY, - .active_low = 1, - }, { - .name = "wr512:green:ap", - .gpio = WR512_3GN_GPIO_LED_AP, - .active_low = 1, - }, { - .name = "wr512:green:wps", - .gpio = WR512_3GN_GPIO_LED_WPS, - .active_low = 1, - }, { - .name = "wr512:green:station", - .gpio = WR512_3GN_GPIO_LED_STATION, - .active_low = 1, - } -}; - -static struct gpio_keys_button wr512_3gn_gpio_buttons[] __initdata = { - { - .desc = "reset_wps", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WR512_3GN_KEYS_DEBOUNCE_INTERVAL, - .gpio = WR512_3GN_GPIO_BUTTON_RESET, - .active_low = 1, - }, { - .desc = "mode", - .type = EV_KEY, - .code = KEY_M, - .debounce_interval = WR512_3GN_KEYS_DEBOUNCE_INTERVAL, - .gpio = WR512_3GN_GPIO_BUTTON_CONNECT, - .active_low = 1, - } -}; - -#define WR512_3GN_GPIO_MODE \ - ((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \ - RT305X_GPIO_MODE_MDIO) - -static void __init wr512_3gn_init(void) -{ - rt305x_gpio_init(WR512_3GN_GPIO_MODE); - - rt305x_register_flash(0); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; - rt305x_register_ethernet(); - ramips_register_gpio_leds(-1, ARRAY_SIZE(wr512_3gn_leds_gpio), - wr512_3gn_leds_gpio); - ramips_register_gpio_buttons(-1, WR512_3GN_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wr512_3gn_gpio_buttons), - wr512_3gn_gpio_buttons); - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_WR512_3GN, "WR512-3GN", "WR512-3GN-like router", - wr512_3gn_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wr6202.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wr6202.c deleted file mode 100644 index 591d9ceb59..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wr6202.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * AWB WR6202 board support - * - * Copyright (C) 2012 Johnathan Boyce<jon.boyce@globalreach.eu.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include<linux/init.h> -#include<linux/platform_device.h> -#include<linux/gpio.h> - -#include<asm/mach-ralink/machine.h> -#include<asm/mach-ralink/dev-gpio-buttons.h> -#include<asm/mach-ralink/dev-gpio-leds.h> -#include<asm/mach-ralink/rt305x.h> -#include<asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define WR6202_GPIO_BUTTON_RESET 10 /* active low */ -#define WR6202_GPIO_BUTTON_WPS 0 /* active low */ - -#define WR6202_KEYS_POLL_INTERVAL 20 -#define WR6202_KEYS_DEBOUNCE_INTERVAL (3 * WR6202_KEYS_POLL_INTERVAL) - -#define WR6202_GPIO_USB_POWER 11 - -#define WR6202_GPIO_LED_3G 13 -#define WR6202_GPIO_LED_WPS 14 - -static struct gpio_led wr6202_leds_gpio[] __initdata = { - { - .name = "wr6202:blue:wps", - .gpio = WR6202_GPIO_LED_WPS, - .active_low = 1, - }, { - .name = "wr6202:blue:3g", - .gpio = WR6202_GPIO_LED_3G, - .active_low = 1, - } -}; - -static struct gpio_keys_button wr6202_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = WR6202_KEYS_DEBOUNCE_INTERVAL, - .gpio = WR6202_GPIO_BUTTON_RESET, - .active_low = 1, - }, { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = WR6202_KEYS_DEBOUNCE_INTERVAL, - .gpio = WR6202_GPIO_BUTTON_WPS, - .active_low = 1, - } -}; - -static void __init wr6202_init(void) -{ - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; - - rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); - - ramips_register_gpio_leds(-1, ARRAY_SIZE(wr6202_leds_gpio), - wr6202_leds_gpio); - ramips_register_gpio_buttons(-1, WR6202_KEYS_POLL_INTERVAL, - ARRAY_SIZE(wr6202_gpio_buttons), - wr6202_gpio_buttons); - - /* Power to the USB port is controlled by GPIO line */ - gpio_request(WR6202_GPIO_USB_POWER, "WR6202_GPIO_USB_POWER"); - gpio_direction_output(WR6202_GPIO_USB_POWER, 0); - gpio_free(WR6202_GPIO_USB_POWER); - - rt305x_register_flash(0); - - rt305x_register_ethernet(); - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_WR6202, "WR6202", "AWB WR6202", - wr6202_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-xdx-rn502j.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-xdx-rn502j.c deleted file mode 100644 index f7ef353262..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-xdx-rn502j.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - * Unknown router name/model, PCB marked with XDX-RN502J - * - * Copyright (C) 2011 Bruno Schwander bruno@tinkerbox.org - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -#include "devices.h" - -#define XDXRN502J_GPIO_BUTTON_RESET 12 -#define XDXRN502J_GPIO_LED_WIFI 7 -#define XDXRN502J_GPIO_LED_POWER 9 - -#define XDXRN502J_BUTTONS_POLL_INTERVAL 20 -#define XDXRN502J_BUTTONS_DEBOUNCE_INTERVAL (3 * XDXRN502J_BUTTONS_POLL_INTERVAL) - - -static struct gpio_led xdxrn502j_leds_gpio[] __initdata = { - { - .name = "xdxrn502j:green:wifi", - .gpio = XDXRN502J_GPIO_LED_WIFI, - .active_low = 1, - }, { - .name = "xdxrn502j:green:power", - .gpio = XDXRN502J_GPIO_LED_POWER, - .active_low = 1, - } -}; - -static struct gpio_keys_button xdxrn502j_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = XDXRN502J_BUTTONS_DEBOUNCE_INTERVAL, - .gpio = XDXRN502J_GPIO_BUTTON_RESET, - .active_low = 1, - } -}; - -#define XDXRN502J_GPIO_MODE \ - ((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \ - RT305X_GPIO_MODE_MDIO) - -static void __init xdxrn502j_init(void) -{ - rt305x_gpio_init(XDXRN502J_GPIO_MODE); - - rt305x_register_flash(0); - - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; - rt305x_register_ethernet(); - - ramips_register_gpio_leds(-1, ARRAY_SIZE(xdxrn502j_leds_gpio), - xdxrn502j_leds_gpio); - - ramips_register_gpio_buttons(-1, XDXRN502J_BUTTONS_POLL_INTERVAL, - ARRAY_SIZE(xdxrn502j_gpio_buttons), - xdxrn502j_gpio_buttons); - - rt305x_register_wifi(); - rt305x_register_wdt(); - rt305x_register_usb(); -} - -MIPS_MACHINE(RAMIPS_MACH_XDXRN502J, "XDXRN502J", "XDX RN502J", - xdxrn502j_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/rt305x.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/rt305x.c deleted file mode 100644 index 8a7a58b7d5..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/rt305x.c +++ /dev/null @@ -1,247 +0,0 @@ -/* - * Ralink RT305x SoC specific setup - * - * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * Parts of this file are based on Ralink's 2.6.21 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> - -#include <asm/mipsregs.h> - -#include <asm/mach-ralink/common.h> -#include <asm/mach-ralink/ramips_gpio.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> - -void __iomem * rt305x_sysc_base; -void __iomem * rt305x_memc_base; -enum rt305x_soc_type rt305x_soc; - -static unsigned long rt5350_get_mem_size(void) -{ - void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE); - unsigned long ret; - u32 t; - - t = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG); - t = (t >> RT5350_SYSCFG0_DRAM_SIZE_SHIFT) & - RT5350_SYSCFG0_DRAM_SIZE_MASK; - - switch (t) { - case RT5350_SYSCFG0_DRAM_SIZE_2M: - ret = 2 * 1024 * 1024; - break; - case RT5350_SYSCFG0_DRAM_SIZE_8M: - ret = 8 * 1024 * 1024; - break; - case RT5350_SYSCFG0_DRAM_SIZE_16M: - ret = 16 * 1024 * 1024; - break; - case RT5350_SYSCFG0_DRAM_SIZE_32M: - ret = 32 * 1024 * 1024; - break; - case RT5350_SYSCFG0_DRAM_SIZE_64M: - ret = 64 * 1024 * 1024; - break; - default: - panic("rt5350: invalid DRAM size: %u", t); - break; - } - - return ret; -} - -void __init ramips_soc_prom_init(void) -{ - void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE); - const char *name = "unknown"; - u32 n0; - u32 n1; - u32 id; - - n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0); - n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1); - - if (n0 == RT3052_CHIP_NAME0 && n1 == RT3052_CHIP_NAME1) { - unsigned long icache_sets; - - icache_sets = (read_c0_config1() >> 22) & 7; - if (icache_sets == 1) { - rt305x_soc = RT305X_SOC_RT3050; - name = "RT3050"; - } else { - rt305x_soc = RT305X_SOC_RT3052; - name = "RT3052"; - } - } else if (n0 == RT3350_CHIP_NAME0 && n1 == RT3350_CHIP_NAME1) { - rt305x_soc = RT305X_SOC_RT3350; - name = "RT3350"; - } else if (n0 == RT3352_CHIP_NAME0 && n1 == RT3352_CHIP_NAME1) { - rt305x_soc = RT305X_SOC_RT3352; - name = "RT3352"; - } else if (n0 == RT5350_CHIP_NAME0 && n1 == RT5350_CHIP_NAME1) { - rt305x_soc = RT305X_SOC_RT5350; - name = "RT5350"; - } else { - panic("rt305x: unknown SoC, n0:%08x n1:%08x\n", n0, n1); - } - - id = __raw_readl(sysc + SYSC_REG_CHIP_ID); - - snprintf(ramips_sys_type, RAMIPS_SYS_TYPE_LEN, - "Ralink %s id:%u rev:%u", - name, - (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK, - (id & CHIP_ID_REV_MASK)); - - ramips_mem_base = RT305X_SDRAM_BASE; - - if (soc_is_rt5350()) { - ramips_get_mem_size = rt5350_get_mem_size; - } else if (soc_is_rt305x() || soc_is_rt3350() ) { - ramips_mem_size_min = RT305X_MEM_SIZE_MIN; - ramips_mem_size_max = RT305X_MEM_SIZE_MAX; - } else if (soc_is_rt3352()) { - ramips_mem_size_min = RT3352_MEM_SIZE_MIN; - ramips_mem_size_max = RT3352_MEM_SIZE_MAX; - } else { - BUG(); - } -} - -static struct ramips_gpio_chip rt305x_gpio_chips[] = { - { - .chip = { - .label = "RT305X-GPIO0", - .base = 0, - .ngpio = 24, - }, - .regs = { - [RAMIPS_GPIO_REG_INT] = 0x00, - [RAMIPS_GPIO_REG_EDGE] = 0x04, - [RAMIPS_GPIO_REG_RENA] = 0x08, - [RAMIPS_GPIO_REG_FENA] = 0x0c, - [RAMIPS_GPIO_REG_DATA] = 0x20, - [RAMIPS_GPIO_REG_DIR] = 0x24, - [RAMIPS_GPIO_REG_POL] = 0x28, - [RAMIPS_GPIO_REG_SET] = 0x2c, - [RAMIPS_GPIO_REG_RESET] = 0x30, - [RAMIPS_GPIO_REG_TOGGLE] = 0x34, - }, - .map_base = RT305X_PIO_BASE, - .map_size = RT305X_PIO_SIZE, - }, - { - .chip = { - .label = "RT305X-GPIO1", - .base = 24, - .ngpio = 16, - }, - .regs = { - [RAMIPS_GPIO_REG_INT] = 0x38, - [RAMIPS_GPIO_REG_EDGE] = 0x3c, - [RAMIPS_GPIO_REG_RENA] = 0x40, - [RAMIPS_GPIO_REG_FENA] = 0x44, - [RAMIPS_GPIO_REG_DATA] = 0x48, - [RAMIPS_GPIO_REG_DIR] = 0x4c, - [RAMIPS_GPIO_REG_POL] = 0x50, - [RAMIPS_GPIO_REG_SET] = 0x54, - [RAMIPS_GPIO_REG_RESET] = 0x58, - [RAMIPS_GPIO_REG_TOGGLE] = 0x5c, - }, - .map_base = RT305X_PIO_BASE, - .map_size = RT305X_PIO_SIZE, - }, - { - .chip = { - .label = "RT305X-GPIO2", - .base = 40, - .ngpio = 12, - }, - .regs = { - [RAMIPS_GPIO_REG_INT] = 0x60, - [RAMIPS_GPIO_REG_EDGE] = 0x64, - [RAMIPS_GPIO_REG_RENA] = 0x68, - [RAMIPS_GPIO_REG_FENA] = 0x6c, - [RAMIPS_GPIO_REG_DATA] = 0x70, - [RAMIPS_GPIO_REG_DIR] = 0x74, - [RAMIPS_GPIO_REG_POL] = 0x78, - [RAMIPS_GPIO_REG_SET] = 0x7c, - [RAMIPS_GPIO_REG_RESET] = 0x80, - [RAMIPS_GPIO_REG_TOGGLE] = 0x84, - }, - .map_base = RT305X_PIO_BASE, - .map_size = RT305X_PIO_SIZE, - }, -}; - -static struct ramips_gpio_data rt305x_gpio_data = { - .chips = rt305x_gpio_chips, - .num_chips = ARRAY_SIZE(rt305x_gpio_chips), -}; - -static void rt305x_gpio_reserve(int first, int last) -{ - for (; first <= last; first++) - gpio_request(first, "reserved"); -} - -void __init rt305x_gpio_init(u32 mode) -{ - u32 t; - - rt305x_sysc_wr(mode, SYSC_REG_GPIO_MODE); - - ramips_gpio_init(&rt305x_gpio_data); - if ((mode & RT305X_GPIO_MODE_I2C) == 0) - rt305x_gpio_reserve(RT305X_GPIO_I2C_SD, RT305X_GPIO_I2C_SCLK); - - if ((mode & RT305X_GPIO_MODE_SPI) == 0) - rt305x_gpio_reserve(RT305X_GPIO_SPI_EN, RT305X_GPIO_SPI_CLK); - - t = mode >> RT305X_GPIO_MODE_UART0_SHIFT; - t &= RT305X_GPIO_MODE_UART0_MASK; - switch (t) { - case RT305X_GPIO_MODE_UARTF: - case RT305X_GPIO_MODE_PCM_UARTF: - case RT305X_GPIO_MODE_PCM_I2S: - case RT305X_GPIO_MODE_I2S_UARTF: - rt305x_gpio_reserve(RT305X_GPIO_7, RT305X_GPIO_14); - break; - case RT305X_GPIO_MODE_PCM_GPIO: - rt305x_gpio_reserve(RT305X_GPIO_10, RT305X_GPIO_14); - break; - case RT305X_GPIO_MODE_GPIO_UARTF: - case RT305X_GPIO_MODE_GPIO_I2S: - rt305x_gpio_reserve(RT305X_GPIO_7, RT305X_GPIO_10); - break; - } - - if ((mode & RT305X_GPIO_MODE_UART1) == 0) - rt305x_gpio_reserve(RT305X_GPIO_UART1_TXD, - RT305X_GPIO_UART1_RXD); - - if ((mode & RT305X_GPIO_MODE_JTAG) == 0) - rt305x_gpio_reserve(RT305X_GPIO_JTAG_TDO, RT305X_GPIO_JTAG_TDI); - - if ((mode & RT305X_GPIO_MODE_MDIO) == 0) - rt305x_gpio_reserve(RT305X_GPIO_MDIO_MDC, - RT305X_GPIO_MDIO_MDIO); - - if ((mode & RT305X_GPIO_MODE_SDRAM) == 0) - rt305x_gpio_reserve(RT305X_GPIO_SDRAM_MD16, - RT305X_GPIO_SDRAM_MD31); - - if ((mode & RT305X_GPIO_MODE_RGMII) == 0) - rt305x_gpio_reserve(RT305X_GPIO_GE0_TXD0, - RT305X_GPIO_GE0_RXCLK); -} diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/setup.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/setup.c deleted file mode 100644 index 5a069db454..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/setup.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Ralink RT305x SoC specific setup - * - * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> - * - * Parts of this file are based on Ralink's 2.6.21 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/err.h> -#include <linux/clk.h> - -#include <asm/mips_machine.h> -#include <asm/reboot.h> -#include <asm/time.h> - -#include <asm/mach-ralink/common.h> -#include <asm/mach-ralink/rt305x.h> -#include <asm/mach-ralink/rt305x_regs.h> -#include "common.h" - -static void rt305x_restart(char *command) -{ - rt305x_sysc_wr(RT305X_RESET_SYSTEM, SYSC_REG_RESET_CTRL); - while (1) - if (cpu_wait) - cpu_wait(); -} - -static void rt305x_halt(void) -{ - while (1) - if (cpu_wait) - cpu_wait(); -} - -unsigned int __cpuinit get_c0_compare_irq(void) -{ - return CP0_LEGACY_COMPARE_IRQ; -} - -void __init ramips_soc_setup(void) -{ - struct clk *clk; - - rt305x_sysc_base = ioremap_nocache(RT305X_SYSC_BASE, PAGE_SIZE); - rt305x_memc_base = ioremap_nocache(RT305X_MEMC_BASE, PAGE_SIZE); - - rt305x_clocks_init(); - - clk = clk_get(NULL, "cpu"); - if (IS_ERR(clk)) - panic("unable to get CPU clock, err=%ld", PTR_ERR(clk)); - - printk(KERN_INFO "%s running at %lu.%02lu MHz\n", ramips_sys_type, - clk_get_rate(clk) / 1000000, - (clk_get_rate(clk) % 1000000) * 100 / 1000000); - - _machine_restart = rt305x_restart; - _machine_halt = rt305x_halt; - pm_power_off = rt305x_halt; - - clk = clk_get(NULL, "uart"); - if (IS_ERR(clk)) - panic("unable to get UART clock, err=%ld", PTR_ERR(clk)); - - ramips_early_serial_setup(0, RT305X_UART0_BASE, clk_get_rate(clk), - RT305X_INTC_IRQ_UART0); - ramips_early_serial_setup(1, RT305X_UART1_BASE, clk_get_rate(clk), - RT305X_INTC_IRQ_UART1); -} - -void __init plat_time_init(void) -{ - struct clk *clk; - - clk = clk_get(NULL, "cpu"); - if (IS_ERR(clk)) - panic("unable to get CPU clock, err=%ld", PTR_ERR(clk)); - - mips_hpt_frequency = clk_get_rate(clk) / 2; -} diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt3883/Kconfig deleted file mode 100644 index 57823f0c67..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt3883/Kconfig +++ /dev/null @@ -1,34 +0,0 @@ -if RALINK_RT3883 - -menu "Ralink RT3662/RT3883 machine selection" - -config RT3883_MACH_RT_N56U - bool "Asus RT-N56U support" - select HW_HAS_PCI - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT3883_MACH_DIR_645 - bool "D-Link DIR-645 support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT3883_MACH_OMNI_EMB_HPM - bool "Omnima EMB HPM board support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT3883_MACH_TEW_691GR - bool "TRENDnet TEW-691GR support" - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -config RT3883_MACH_TEW_692GR - bool "TRENDnet TEW-692GR support" - select HW_HAS_PCI - select RALINK_DEV_GPIO_BUTTONS - select RALINK_DEV_GPIO_LEDS - -endmenu - -endif diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt3883/Makefile deleted file mode 100644 index e1ab61e814..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt3883/Makefile +++ /dev/null @@ -1,18 +0,0 @@ -# -# Makefile for the Ralink RT3662/RT3883 SoC specific parts of the kernel -# -# Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> -# -# This program is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License version 2 as published -# by the Free Software Foundation. - -obj-y := irq.o setup.o devices.o rt3883.o clock.o - -obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - -obj-$(CONFIG_RT3883_MACH_DIR_645) += mach-dir-645.o -obj-$(CONFIG_RT3883_MACH_OMNI_EMB_HPM) += mach-omni-emb-hpm.o -obj-$(CONFIG_RT3883_MACH_RT_N56U) += mach-rt-n56u.o -obj-$(CONFIG_RT3883_MACH_TEW_691GR) += mach-tew-691gr.o -obj-$(CONFIG_RT3883_MACH_TEW_692GR) += mach-tew-692gr.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/clock.c b/target/linux/ramips/files/arch/mips/ralink/rt3883/clock.c deleted file mode 100644 index bf70259cae..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt3883/clock.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - * Ralink RT3662/RT3883 clock API - * - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/clk.h> - -#include <asm/mach-ralink/common.h> -#include <asm/mach-ralink/rt3883.h> -#include <asm/mach-ralink/rt3883_regs.h> -#include "common.h" - -struct clk { - unsigned long rate; -}; - -static struct clk rt3883_cpu_clk; -static struct clk rt3883_sys_clk; -static struct clk rt3883_wdt_clk; -static struct clk rt3883_uart_clk; - -void __init rt3883_clocks_init(void) -{ - u32 syscfg0; - u32 clksel; - u32 ddr2; - - syscfg0 = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG0); - clksel = ((syscfg0 >> RT3883_SYSCFG0_CPUCLK_SHIFT) & - RT3883_SYSCFG0_CPUCLK_MASK); - ddr2 = syscfg0 & RT3883_SYSCFG0_DRAM_TYPE_DDR2; - - switch (clksel) { - case RT3883_SYSCFG0_CPUCLK_250: - rt3883_cpu_clk.rate = 250000000; - rt3883_sys_clk.rate = (ddr2) ? 125000000 : 83000000; - break; - case RT3883_SYSCFG0_CPUCLK_384: - rt3883_cpu_clk.rate = 384000000; - rt3883_sys_clk.rate = (ddr2) ? 128000000 : 96000000; - break; - case RT3883_SYSCFG0_CPUCLK_480: - rt3883_cpu_clk.rate = 480000000; - rt3883_sys_clk.rate = (ddr2) ? 160000000 : 120000000; - break; - case RT3883_SYSCFG0_CPUCLK_500: - rt3883_cpu_clk.rate = 500000000; - rt3883_sys_clk.rate = (ddr2) ? 166000000 : 125000000; - break; - } - - rt3883_wdt_clk.rate = rt3883_sys_clk.rate; - rt3883_uart_clk.rate = 40000000; -} - -struct clk *clk_get(struct device *dev, const char *id) -{ - if (!strcmp(id, "sys")) - return &rt3883_sys_clk; - - if (!strcmp(id, "cpu")) - return &rt3883_cpu_clk; - - if (!strcmp(id, "wdt")) - return &rt3883_wdt_clk; - - if (!strcmp(id, "uart")) - return &rt3883_uart_clk; - - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get); - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/common.h b/target/linux/ramips/files/arch/mips/ralink/rt3883/common.h deleted file mode 100644 index a389dccce0..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt3883/common.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Ralink RT3662/RT3883 SoC common defines - * - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _RT3883_COMMON_H -#define _RT3883_COMMON_H - -void rt3883_clocks_init(void); - -#endif /* _RT3883_COMMON_H */
\ No newline at end of file diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/devices.c b/target/linux/ramips/files/arch/mips/ralink/rt3883/devices.c deleted file mode 100644 index 6077e97dda..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt3883/devices.c +++ /dev/null @@ -1,398 +0,0 @@ -/* - * Ralink RT3662/RT3883 SoC platform device registration - * - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/partitions.h> -#include <linux/dma-mapping.h> -#include <linux/spi/spi.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/rt2x00_platform.h> -#include <linux/usb/ehci_pdriver.h> -#include <linux/usb/ohci_pdriver.h> - -#include <asm/addrspace.h> - -#include <asm/mach-ralink/rt3883.h> -#include <asm/mach-ralink/rt3883_regs.h> -#include <asm/mach-ralink/ramips_nand_platform.h> -#include "devices.h" - -#include <ramips_eth_platform.h> - -static struct resource rt3883_flash0_resources[] = { - { - .flags = IORESOURCE_MEM, - .start = RT3883_BOOT_BASE, - .end = RT3883_BOOT_BASE + RT3883_BOOT_SIZE - 1, - }, -}; - -struct physmap_flash_data rt3883_flash0_data; -static struct platform_device rt3883_flash0_device = { - .name = "physmap-flash", - .resource = rt3883_flash0_resources, - .num_resources = ARRAY_SIZE(rt3883_flash0_resources), - .dev = { - .platform_data = &rt3883_flash0_data, - }, -}; - -static struct resource rt3883_flash1_resources[] = { - { - .flags = IORESOURCE_MEM, - .start = RT3883_SRAM_BASE, - .end = RT3883_SRAM_BASE + RT3883_SRAM_SIZE - 1, - }, -}; - -struct physmap_flash_data rt3883_flash1_data; -static struct platform_device rt3883_flash1_device = { - .name = "physmap-flash", - .resource = rt3883_flash1_resources, - .num_resources = ARRAY_SIZE(rt3883_flash1_resources), - .dev = { - .platform_data = &rt3883_flash1_data, - }, -}; - -static int rt3883_flash_instance __initdata; -void __init rt3883_register_pflash(unsigned int id) -{ - struct platform_device *pdev; - struct physmap_flash_data *pdata; - void __iomem *fscc_base; - u32 t; - int reg; - - switch (id) { - case 0: - pdev = &rt3883_flash0_device; - reg = RT3883_FSCC_REG_FLASH_CFG0; - break; - case 1: - pdev = &rt3883_flash1_device; - reg = RT3883_FSCC_REG_FLASH_CFG1; - break; - default: - return; - } - - pdata = pdev->dev.platform_data; - - fscc_base = ioremap(RT3883_FSCC_BASE, RT3883_FSCC_SIZE); - if (!fscc_base) - panic("RT3883: ioremap failed for FSCC"); - - t = __raw_readl(fscc_base + reg); - iounmap(fscc_base); - - t = (t >> RT3883_FLASH_CFG_WIDTH_SHIFT) & RT3883_FLASH_CFG_WIDTH_MASK; - switch (t) { - case RT3883_FLASH_CFG_WIDTH_8BIT: - pdata->width = 1; - break; - case RT3883_FLASH_CFG_WIDTH_16BIT: - pdata->width = 2; - break; - case RT3883_FLASH_CFG_WIDTH_32BIT: - if (id == 1) { - pdata->width = 4; - break; - } - /* fallthrough */ - default: - pr_warn("RT3883: flash bank%d: invalid width detected\n", id); - return; - } - - pdev->id = rt3883_flash_instance; - - platform_device_register(pdev); - rt3883_flash_instance++; -} - -static atomic_t rt3883_usb_pwr_ref = ATOMIC_INIT(0); - -static int rt3883_usb_power_on(struct platform_device *pdev) -{ - - if (atomic_inc_return(&rt3883_usb_pwr_ref) == 1) { - u32 t; - - t = rt3883_sysc_rr(RT3883_SYSC_REG_USB_PS); - - /* enable clock for port0's and port1's phys */ - t = rt3883_sysc_rr(RT3883_SYSC_REG_CLKCFG1); - t |= RT3883_CLKCFG1_UPHY0_CLK_EN | RT3883_CLKCFG1_UPHY1_CLK_EN; - rt3883_sysc_wr(t, RT3883_SYSC_REG_CLKCFG1); - mdelay(500); - - /* pull USBHOST and USBDEV out from reset */ - t = rt3883_sysc_rr(RT3883_SYSC_REG_RSTCTRL); - t &= ~(RT3883_RSTCTRL_UHST | RT3883_RSTCTRL_UDEV); - rt3883_sysc_wr(t, RT3883_SYSC_REG_RSTCTRL); - mdelay(500); - - /* enable host mode */ - t = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG1); - t |= RT3883_SYSCFG1_USB0_HOST_MODE; - rt3883_sysc_wr(t, RT3883_SYSC_REG_SYSCFG1); - - t = rt3883_sysc_rr(RT3883_SYSC_REG_USB_PS); - } - - return 0; -} - -static void rt3883_usb_power_off(struct platform_device *pdev) -{ - if (atomic_dec_return(&rt3883_usb_pwr_ref) == 0) { - u32 t; - - /* put USBHOST and USBDEV into reset */ - t = rt3883_sysc_rr(RT3883_SYSC_REG_RSTCTRL); - t |= RT3883_RSTCTRL_UHST | RT3883_RSTCTRL_UDEV; - rt3883_sysc_wr(t, RT3883_SYSC_REG_RSTCTRL); - udelay(10000); - - /* disable clock for port0's and port1's phys*/ - t = rt3883_sysc_rr(RT3883_SYSC_REG_CLKCFG1); - t &= ~(RT3883_CLKCFG1_UPHY0_CLK_EN | - RT3883_CLKCFG1_UPHY1_CLK_EN); - rt3883_sysc_wr(t, RT3883_SYSC_REG_CLKCFG1); - udelay(10000); - } -} - -static struct usb_ehci_pdata rt3883_ehci_data = { - .power_on = rt3883_usb_power_on, - .power_off = rt3883_usb_power_off, -}; - -static struct resource rt3883_ehci_resources[] = { - { - .start = RT3883_EHCI_BASE, - .end = RT3883_EHCI_BASE + PAGE_SIZE - 1, - .flags = IORESOURCE_MEM, - }, { - .start = RT3883_INTC_IRQ_UHST, - .end = RT3883_INTC_IRQ_UHST, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 rt3883_ehci_dmamask = DMA_BIT_MASK(32); -static struct platform_device rt3883_ehci_device = { - .name = "ehci-platform", - .id = -1, - .resource = rt3883_ehci_resources, - .num_resources = ARRAY_SIZE(rt3883_ehci_resources), - .dev = { - .dma_mask = &rt3883_ehci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &rt3883_ehci_data, - }, -}; - -static struct resource rt3883_ohci_resources[] = { - { - .start = RT3883_OHCI_BASE, - .end = RT3883_OHCI_BASE + PAGE_SIZE - 1, - .flags = IORESOURCE_MEM, - }, { - .start = RT3883_INTC_IRQ_UHST, - .end = RT3883_INTC_IRQ_UHST, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct usb_ohci_pdata rt3883_ohci_data = { - .power_on = rt3883_usb_power_on, - .power_off = rt3883_usb_power_off, -}; - -static u64 rt3883_ohci_dmamask = DMA_BIT_MASK(32); -static struct platform_device rt3883_ohci_device = { - .name = "ohci-platform", - .id = -1, - .resource = rt3883_ohci_resources, - .num_resources = ARRAY_SIZE(rt3883_ohci_resources), - .dev = { - .dma_mask = &rt3883_ohci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &rt3883_ohci_data, - }, -}; - -void __init rt3883_register_usbhost(void) -{ - platform_device_register(&rt3883_ehci_device); - platform_device_register(&rt3883_ohci_device); -} - -static void rt3883_fe_reset(void) -{ - u32 t; - - t = rt3883_sysc_rr(RT3883_SYSC_REG_RSTCTRL); - t |= RT3883_RSTCTRL_FE; - rt3883_sysc_wr(t , RT3883_SYSC_REG_RSTCTRL); - - t &= ~RT3883_RSTCTRL_FE; - rt3883_sysc_wr(t, RT3883_SYSC_REG_RSTCTRL); -} - -static struct resource rt3883_eth_resources[] = { - { - .start = RT3883_FE_BASE, - .end = RT3883_FE_BASE + PAGE_SIZE - 1, - .flags = IORESOURCE_MEM, - }, { - .start = RT3883_CPU_IRQ_FE, - .end = RT3883_CPU_IRQ_FE, - .flags = IORESOURCE_IRQ, - }, -}; - -struct ramips_eth_platform_data rt3883_eth_data = { - .mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 }, - .reset_fe = rt3883_fe_reset, - .min_pkt_len = 64, -}; - -static struct platform_device rt3883_eth_device = { - .name = "ramips_eth", - .resource = rt3883_eth_resources, - .num_resources = ARRAY_SIZE(rt3883_eth_resources), - .dev = { - .platform_data = &rt3883_eth_data, - } -}; - -void __init rt3883_register_ethernet(void) -{ - struct clk *clk; - - clk = clk_get(NULL, "sys"); - if (IS_ERR(clk)) - panic("unable to get SYS clock, err=%ld", PTR_ERR(clk)); - - rt3883_eth_data.sys_freq = clk_get_rate(clk); - - platform_device_register(&rt3883_eth_device); -} - -static struct resource rt3883_wlan_resources[] = { - { - .start = RT3883_WLAN_BASE, - .end = RT3883_WLAN_BASE + 0x3FFFF, - .flags = IORESOURCE_MEM, - }, { - .start = RT3883_CPU_IRQ_WLAN, - .end = RT3883_CPU_IRQ_WLAN, - .flags = IORESOURCE_IRQ, - }, -}; - -struct rt2x00_platform_data rt3883_wlan_data; -static struct platform_device rt3883_wlan_device = { - .name = "rt2800_wmac", - .resource = rt3883_wlan_resources, - .num_resources = ARRAY_SIZE(rt3883_wlan_resources), - .dev = { - .platform_data = &rt3883_wlan_data, - } -}; - -void __init rt3883_register_wlan(void) -{ - rt3883_wlan_data.eeprom_file_name = "soc_wmac.eeprom", - platform_device_register(&rt3883_wlan_device); -} - -static struct resource rt3883_wdt_resources[] = { - { - .start = RT3883_TIMER_BASE, - .end = RT3883_TIMER_BASE + RT3883_TIMER_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device rt3883_wdt_device = { - .name = "ramips-wdt", - .id = -1, - .resource = rt3883_wdt_resources, - .num_resources = ARRAY_SIZE(rt3883_wdt_resources), -}; - -void __init rt3883_register_wdt(bool enable_reset) -{ - if (enable_reset) { - u32 t; - - /* enable WDT reset output on GPIO 2 */ - t = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG1); - t |= RT3883_SYSCFG1_GPIO2_AS_WDT_OUT; - rt3883_sysc_wr(t, RT3883_SYSC_REG_SYSCFG1); - } - - platform_device_register(&rt3883_wdt_device); -} - -static struct resource rt3883_nand_resources[] = { - { - .flags = IORESOURCE_MEM, - .start = RT3883_NANDC_BASE, - .end = RT3883_NANDC_BASE + RT3883_NANDC_SIZE - 1, - }, -}; - -struct ramips_nand_platform_data rt3883_nand_data; -static struct platform_device rt3883_nand_device = { - .name = RAMIPS_NAND_DRIVER_NAME, - .id = -1, - .resource = rt3883_nand_resources, - .num_resources = ARRAY_SIZE(rt3883_nand_resources), - .dev = { - .platform_data = &rt3883_nand_data, - }, -}; - -void __init rt3883_register_nand(void) -{ - platform_device_register(&rt3883_nand_device); -} - -static struct resource rt3883_spi_resources[] = { - { - .flags = IORESOURCE_MEM, - .start = RT3883_SPI_BASE, - .end = RT3883_SPI_BASE + RT3883_SPI_SIZE - 1, - }, -}; - -static struct platform_device rt3883_spi_device = { - .name = "ramips-spi", - .id = 0, - .resource = rt3883_spi_resources, - .num_resources = ARRAY_SIZE(rt3883_spi_resources), -}; - -void __init rt3883_register_spi(struct spi_board_info *info, int n) -{ - spi_register_board_info(info, n); - platform_device_register(&rt3883_spi_device); -} - diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/devices.h b/target/linux/ramips/files/arch/mips/ralink/rt3883/devices.h deleted file mode 100644 index 808bcb2d36..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt3883/devices.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Ralink RT3662/3883 SoC specific platform device definitions - * - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _RT3883_DEVICES_H -#define _RT3883_DEVICES_H - -struct physmap_flash_data; -struct spi_board_info; - -extern struct physmap_flash_data rt3883_flash0_data; -extern struct physmap_flash_data rt3883_flash1_data; -void rt3883_register_pflash(unsigned int id); - -extern struct ramips_nand_platform_data rt3883_nand_data; -void rt3883_register_nand(void); - -extern struct ramips_eth_platform_data rt3883_eth_data; -void rt3883_register_ethernet(void); -void rt3883_register_usbhost(void); - -extern struct rt2x00_platform_data rt3883_wlan_data; -void rt3883_register_wlan(void); -void rt3883_register_wdt(bool enable_reset); - -void rt3883_register_spi(struct spi_board_info *info, int n); - -#endif /* _RT3883_DEVICES_H */ diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/early_printk.c b/target/linux/ramips/files/arch/mips/ralink/rt3883/early_printk.c deleted file mode 100644 index e3bf7ba339..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt3883/early_printk.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Ralink RT3662/RT3883 SoC early printk support - * - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/io.h> -#include <linux/serial_reg.h> - -#include <asm/addrspace.h> - -#include <asm/mach-ralink/rt3883_regs.h> - -#define UART_READ(r) \ - __raw_readl((void __iomem *)(KSEG1ADDR(RT3883_UART1_BASE) + 4 * (r))) - -#define UART_WRITE(r, v) \ - __raw_writel((v), (void __iomem *)(KSEG1ADDR(RT3883_UART1_BASE) + 4 * (r))) - -void prom_putchar(unsigned char ch) -{ - while (((UART_READ(RT3883_UART_REG_LSR)) & UART_LSR_THRE) == 0); - UART_WRITE(RT3883_UART_REG_TX, ch); - while (((UART_READ(RT3883_UART_REG_LSR)) & UART_LSR_THRE) == 0); -} diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/irq.c b/target/linux/ramips/files/arch/mips/ralink/rt3883/irq.c deleted file mode 100644 index b561fd38cd..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt3883/irq.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * Ralink RT3662/RT3883 SoC specific interrupt handling - * - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> - -#include <asm/irq_cpu.h> -#include <asm/mipsregs.h> - -#include <asm/mach-ralink/common.h> -#include <asm/mach-ralink/rt3883.h> -#include <asm/mach-ralink/rt3883_regs.h> - -static void rt3883_intc_irq_dispatch(void) -{ - u32 pending; - - pending = ramips_intc_get_status(); - - if (pending & RT3883_INTC_INT_TIMER0) - do_IRQ(RT3883_INTC_IRQ_TIMER0); - - else if (pending & RT3883_INTC_INT_TIMER1) - do_IRQ(RT3883_INTC_IRQ_TIMER1); - - else if (pending & RT3883_INTC_INT_UART0) - do_IRQ(RT3883_INTC_IRQ_UART0); - - else if (pending & RT3883_INTC_INT_UART1) - do_IRQ(RT3883_INTC_IRQ_UART1); - - else if (pending & RT3883_INTC_INT_PERFC) - do_IRQ(RT3883_INTC_IRQ_PERFC); - - else if (pending & RT3883_INTC_INT_UHST) - do_IRQ(RT3883_INTC_IRQ_UHST); - - /* TODO: handle PIO interrupts as well */ - - else - spurious_interrupt(); -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned long pending; - - pending = read_c0_status() & read_c0_cause() & ST0_IM; - - if (pending & STATUSF_IP7) - do_IRQ(RT3883_CPU_IRQ_COUNTER); - - else if (pending & STATUSF_IP5) - do_IRQ(RT3883_CPU_IRQ_FE); - - else if (pending & STATUSF_IP6) - do_IRQ(RT3883_CPU_IRQ_WLAN); - - else if (pending & STATUSF_IP4) - do_IRQ(RT3883_CPU_IRQ_PCI); - - else if (pending & STATUSF_IP2) - rt3883_intc_irq_dispatch(); - - else - spurious_interrupt(); -} - -void __init arch_init_irq(void) -{ - mips_cpu_irq_init(); - ramips_intc_irq_init(RT3883_INTC_BASE, RT3883_CPU_IRQ_INTC, - RT3883_INTC_IRQ_BASE); - cp0_perfcount_irq = RT3883_INTC_IRQ_PERFC; -} diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/mach-dir-645.c b/target/linux/ramips/files/arch/mips/ralink/rt3883/mach-dir-645.c deleted file mode 100644 index 825da27f77..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt3883/mach-dir-645.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - * D-Link DIR-645 board support - * - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/rtl8367.h> -#include <linux/ethtool.h> -#include <linux/rt2x00_platform.h> -#include <linux/spi/spi.h> -#include <linux/gpio.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt3883.h> -#include <asm/mach-ralink/rt3883_regs.h> -#include <asm/mach-ralink/ramips_eth_platform.h> - -#include "devices.h" - -#define DIR_645_GPIO_LED_INET 0 -#define DIR_645_GPIO_LED_WPS 26 - -#define DIR_645_GPIO_BUTTON_RESET 9 -#define DIR_645_GPIO_BUTTON_WPS 14 - -#define DIR_645_GPIO_USB_POWER 30 - -#define DIR_645_GPIO_RTL8367_SCK 2 -#define DIR_645_GPIO_RTL8367_SDA 1 - -#define DIR_645_KEYS_POLL_INTERVAL 20 -#define DIR_645_KEYS_DEBOUNCE_INTERVAL (3 * DIR_645_KEYS_POLL_INTERVAL) - -static struct gpio_led dir_645_leds_gpio[] __initdata = { - { - .name = "d-link:green:inet", - .gpio = DIR_645_GPIO_LED_INET, - .active_low = 1, - }, - { - .name = "d-link:green:wps", - .gpio = DIR_645_GPIO_LED_WPS, - .active_low = 1, - }, -}; - -static struct gpio_keys_button dir_645_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = DIR_645_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR_645_GPIO_BUTTON_RESET, - .active_low = 1, - }, - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DIR_645_KEYS_DEBOUNCE_INTERVAL, - .gpio = DIR_645_GPIO_BUTTON_WPS, - .active_low = 1, - } -}; - -static struct rtl8367_extif_config dir_645_rtl8367_extif1_cfg = { - .txdelay = 1, - .rxdelay = 0, - .mode = RTL8367_EXTIF_MODE_RGMII, - .ability = { - .force_mode = 1, - .txpause = 1, - .rxpause = 1, - .link = 1, - .duplex = 1, - .speed = RTL8367_PORT_SPEED_1000, - } -}; - -static struct rtl8367_platform_data dir_645_rtl8367_data = { - .gpio_sda = DIR_645_GPIO_RTL8367_SDA, - .gpio_sck = DIR_645_GPIO_RTL8367_SCK, - .extif1_cfg = &dir_645_rtl8367_extif1_cfg, -}; - -static struct platform_device dir_645_rtl8367_device = { - .name = RTL8367B_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &dir_645_rtl8367_data, - } -}; - -static struct spi_board_info dir_645_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p80", - } -}; - -static void __init dir_645_gpio_init(void) -{ - rt3883_gpio_init(RT3883_GPIO_MODE_I2C | - RT3883_GPIO_MODE_UART0(RT3883_GPIO_MODE_GPIO) | - RT3883_GPIO_MODE_JTAG | - RT3883_GPIO_MODE_PCI(RT3883_GPIO_MODE_PCI_FNC)); - - gpio_request_one(DIR_645_GPIO_USB_POWER, - GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, - "USB power"); -} - -static void __init dir_645_init(void) -{ - dir_645_gpio_init(); - - rt3883_register_spi(dir_645_spi_info, - ARRAY_SIZE(dir_645_spi_info)); - - ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_645_leds_gpio), - dir_645_leds_gpio); - - ramips_register_gpio_buttons(-1, DIR_645_KEYS_POLL_INTERVAL, - ARRAY_SIZE(dir_645_gpio_buttons), - dir_645_gpio_buttons); - - platform_device_register(&dir_645_rtl8367_device); - - rt3883_wlan_data.disable_5ghz = 1; - rt3883_register_wlan(); - - rt3883_eth_data.speed = SPEED_1000; - rt3883_eth_data.duplex = DUPLEX_FULL; - rt3883_eth_data.tx_fc = 1; - rt3883_eth_data.rx_fc = 1; - rt3883_register_ethernet(); - - rt3883_register_wdt(false); - rt3883_register_usbhost(); -} - -MIPS_MACHINE(RAMIPS_MACH_DIR_645, "DIR-645", "D-Link DIR-645", dir_645_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/mach-omni-emb-hpm.c b/target/linux/ramips/files/arch/mips/ralink/rt3883/mach-omni-emb-hpm.c deleted file mode 100644 index 77ccff624f..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt3883/mach-omni-emb-hpm.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * Omnima EMB HPM board support - * - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ethtool.h> -#include <linux/gpio.h> -#include <linux/rt2x00_platform.h> -#include <linux/spi/spi.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt3883.h> -#include <asm/mach-ralink/rt3883_regs.h> -#include <asm/mach-ralink/ramips_eth_platform.h> - -#include "devices.h" - -#define OMNI_EMB_HPM_GPIO_LED_POWER 7 -#define OMNI_EMB_HPM_GPIO_LED_ETH_GREEN 20 -#define OMNI_EMB_HPM_GPIO_LED_ETH_RED 18 -#define OMNI_EMB_HPM_GPIO_LED_STATUS 21 -#define OMNI_EMB_HPM_GPIO_LED_WIFI_GREEN 17 -#define OMNI_EMB_HPM_GPIO_LED_WIFI_RED 19 - -#define OMNI_EMB_HPM_GPIO_BUTTON_RESET 14 - -#define OMNI_EMB_HPM_GPIO_USB0_ENABLE 2 -#define OMNI_EMB_HPM_GPIO_USB1_ENABLE 1 -#define OMNI_EMB_HPM_GPIO_USB0_OC 12 -#define OMNI_EMB_HPM_GPIO_USB1_OC 13 - -#define OMNI_EMB_HPM_KEYS_POLL_INTERVAL 20 -#define OMNI_EMB_HPM_KEYS_DEBOUNCE_INTERVAL (3 * OMNI_EMB_HPM_KEYS_POLL_INTERVAL) - -static struct gpio_led omni_emb_hpm_leds_gpio[] __initdata = { - { - .name = "emb:orange:power", - .gpio = OMNI_EMB_HPM_GPIO_LED_POWER, - .active_low = 1, - }, - { - .name = "emb:green:status", - .gpio = OMNI_EMB_HPM_GPIO_LED_STATUS, - }, - { - .name = "emb:green:eth", - .gpio = OMNI_EMB_HPM_GPIO_LED_ETH_GREEN, - .active_low = 1, - }, - { - .name = "emb:red:eth", - .gpio = OMNI_EMB_HPM_GPIO_LED_ETH_RED, - .active_low = 1, - }, - { - .name = "emb:green:wifi", - .gpio = OMNI_EMB_HPM_GPIO_LED_WIFI_GREEN, - .active_low = 1, - }, - { - .name = "emb:red:wifi", - .gpio = OMNI_EMB_HPM_GPIO_LED_WIFI_RED, - .active_low = 1, - }, -}; - -static struct gpio_keys_button omni_emb_hpm_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = OMNI_EMB_HPM_KEYS_DEBOUNCE_INTERVAL, - .gpio = OMNI_EMB_HPM_GPIO_BUTTON_RESET, - .active_low = 1, - }, -}; - -static struct spi_board_info omni_emb_hpm_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p80", - } -}; - - -static void __init omni_emb_hpm_gpio_request(unsigned int gpio, - unsigned long flags, - const char *label, - bool free) -{ - int err; - - err = gpio_request_one(gpio, flags, label); - if (err) { - pr_err("EMB_HPM: can't setup GPIO%u (%s), err=%d\n", - gpio, label, err); - return; - } - - if (free) - gpio_free(gpio); -} - -static void __init omni_emb_hpm_gpio_init(void) -{ - rt3883_gpio_init(RT3883_GPIO_MODE_I2C | - RT3883_GPIO_MODE_UART0(RT3883_GPIO_MODE_GPIO) | - RT3883_GPIO_MODE_JTAG); - - omni_emb_hpm_gpio_request(OMNI_EMB_HPM_GPIO_USB0_ENABLE, - GPIOF_OUT_INIT_HIGH, - "USB0 power", true); - omni_emb_hpm_gpio_request(OMNI_EMB_HPM_GPIO_USB1_ENABLE, - GPIOF_OUT_INIT_HIGH, - "USB1 power", true); - omni_emb_hpm_gpio_request(OMNI_EMB_HPM_GPIO_USB0_OC, - GPIOF_IN, "USB0 OC", false); - omni_emb_hpm_gpio_request(OMNI_EMB_HPM_GPIO_USB1_OC, - GPIOF_IN, "USB1 OC", false); -} - -static void __init omni_emb_hpm_init(void) -{ - omni_emb_hpm_gpio_init(); - - ramips_register_gpio_leds(-1, ARRAY_SIZE(omni_emb_hpm_leds_gpio), - omni_emb_hpm_leds_gpio); - - ramips_register_gpio_buttons(-1, OMNI_EMB_HPM_KEYS_POLL_INTERVAL, - ARRAY_SIZE(omni_emb_hpm_gpio_buttons), - omni_emb_hpm_gpio_buttons); - - rt3883_register_spi(omni_emb_hpm_spi_info, - ARRAY_SIZE(omni_emb_hpm_spi_info)); - - rt3883_register_wlan(); - - rt3883_eth_data.phy_mask = BIT(4); - rt3883_register_ethernet(); - - rt3883_register_wdt(false); - rt3883_register_usbhost(); -} - -MIPS_MACHINE(RAMIPS_MACH_OMNI_EMB_HPM, "OMNI-EMB-HPM", "Omnima EMB HPM", - omni_emb_hpm_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/mach-rt-n56u.c b/target/linux/ramips/files/arch/mips/ralink/rt3883/mach-rt-n56u.c deleted file mode 100644 index 99aa03fe9e..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt3883/mach-rt-n56u.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - * Asus RT-N56U board support - * - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/rtl8367.h> -#include <linux/ethtool.h> -#include <linux/pci.h> -#include <linux/rt2x00_platform.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt3883.h> -#include <asm/mach-ralink/rt3883_regs.h> -#include <asm/mach-ralink/ramips_eth_platform.h> - -#include "devices.h" - -#define RT_N56U_GPIO_LED_POWER 0 -#define RT_N56U_GPIO_LED_LAN 19 -#define RT_N56U_GPIO_LED_USB 24 -#define RT_N56U_GPIO_LED_WAN 27 -#define RT_N56U_GPIO_BUTTON_RESET 13 -#define RT_N56U_GPIO_BUTTON_WPS 26 - -#define RT_N56U_GPIO_RTL8367_SCK 2 -#define RT_N56U_GPIO_RTL8367_SDA 1 - -#define RT_N56U_KEYS_POLL_INTERVAL 20 -#define RT_N56U_KEYS_DEBOUNCE_INTERVAL (3 * RT_N56U_KEYS_POLL_INTERVAL) - -static struct gpio_led rt_n56u_leds_gpio[] __initdata = { - { - .name = "asus:blue:power", - .gpio = RT_N56U_GPIO_LED_POWER, - .active_low = 1, - }, - { - .name = "asus:blue:lan", - .gpio = RT_N56U_GPIO_LED_LAN, - .active_low = 1, - }, - { - .name = "asus:blue:wan", - .gpio = RT_N56U_GPIO_LED_WAN, - .active_low = 1, - }, - { - .name = "asus:blue:usb", - .gpio = RT_N56U_GPIO_LED_USB, - .active_low = 1, - }, -}; - -static struct gpio_keys_button rt_n56u_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = RT_N56U_KEYS_DEBOUNCE_INTERVAL, - .gpio = RT_N56U_GPIO_BUTTON_RESET, - .active_low = 1, - }, - { - .desc = "wps", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = RT_N56U_KEYS_DEBOUNCE_INTERVAL, - .gpio = RT_N56U_GPIO_BUTTON_WPS, - .active_low = 1, - } -}; - -static struct rtl8367_extif_config rt_n56u_rtl8367_extif1_cfg = { - .txdelay = 1, - .rxdelay = 0, - .mode = RTL8367_EXTIF_MODE_RGMII, - .ability = { - .force_mode = 1, - .txpause = 1, - .rxpause = 1, - .link = 1, - .duplex = 1, - .speed = RTL8367_PORT_SPEED_1000, - } -}; - -static struct rtl8367_platform_data rt_n56u_rtl8367_data = { - .gpio_sda = RT_N56U_GPIO_RTL8367_SDA, - .gpio_sck = RT_N56U_GPIO_RTL8367_SCK, - .extif1_cfg = &rt_n56u_rtl8367_extif1_cfg, -}; - -static struct platform_device rt_n56u_rtl8367_device = { - .name = RTL8367_DRIVER_NAME, - .id = -1, - .dev = { - .platform_data = &rt_n56u_rtl8367_data, - } -}; - -static struct rt2x00_platform_data rt_n56u_pci_wlan_data = { - .eeprom_file_name = "rt2x00pci_1_0.eeprom", -}; - -static int rt_n56u_pci_plat_dev_init(struct pci_dev *dev) -{ - if (dev->bus->number == 1 && PCI_SLOT(dev->devfn) == 0) - dev->dev.platform_data = &rt_n56u_pci_wlan_data; - - return 0; -} - -static void __init rt_n56u_init(void) -{ - rt3883_gpio_init(RT3883_GPIO_MODE_I2C | - RT3883_GPIO_MODE_UART0(RT3883_GPIO_MODE_GPIO) | - RT3883_GPIO_MODE_JTAG | - RT3883_GPIO_MODE_PCI(RT3883_GPIO_MODE_PCI_FNC)); - - rt3883_register_pflash(0); - - ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n56u_leds_gpio), - rt_n56u_leds_gpio); - - ramips_register_gpio_buttons(-1, RT_N56U_KEYS_POLL_INTERVAL, - ARRAY_SIZE(rt_n56u_gpio_buttons), - rt_n56u_gpio_buttons); - - platform_device_register(&rt_n56u_rtl8367_device); - - rt3883_wlan_data.disable_2ghz = 1; - rt3883_register_wlan(); - - rt3883_eth_data.speed = SPEED_1000; - rt3883_eth_data.duplex = DUPLEX_FULL; - rt3883_eth_data.tx_fc = 1; - rt3883_eth_data.rx_fc = 1; - rt3883_register_ethernet(); - - rt3883_register_wdt(false); - rt3883_register_usbhost(); - rt3883_pci_set_plat_dev_init(rt_n56u_pci_plat_dev_init); - rt3883_pci_init(RT3883_PCI_MODE_PCIE); -} - -MIPS_MACHINE(RAMIPS_MACH_RT_N56U, "RT-N56U", "Asus RT-N56U", rt_n56u_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/mach-tew-691gr.c b/target/linux/ramips/files/arch/mips/ralink/rt3883/mach-tew-691gr.c deleted file mode 100644 index 7b553ab6b2..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt3883/mach-tew-691gr.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - * TRENDnet TEW-691GR board support - * - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ethtool.h> -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/rt2x00_platform.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt3883.h> -#include <asm/mach-ralink/rt3883_regs.h> -#include <asm/mach-ralink/ramips_eth_platform.h> - -#include "devices.h" - -#define TEW_691GR_GPIO_LED_WPS_GREEN 9 - -#define TEW_691GR_GPIO_BUTTON_RESET 10 -#define TEW_691GR_GPIO_BUTTON_WPS 26 - -#define TEW_691GR_GPIO_SWITCH_RFKILL 0 - -#define TEW_691GR_KEYS_POLL_INTERVAL 20 -#define TEW_691GR_KEYS_DEBOUNCE_INTERVAL (3 * TEW_691GR_KEYS_POLL_INTERVAL) - -static struct gpio_led tew_691gr_leds_gpio[] __initdata = { - { - .name = "trendnet:green:wps", - .gpio = TEW_691GR_GPIO_LED_WPS_GREEN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tew_691gr_gpio_buttons[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TEW_691GR_KEYS_DEBOUNCE_INTERVAL, - .gpio = TEW_691GR_GPIO_BUTTON_RESET, - .active_low = 1, - }, - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TEW_691GR_KEYS_DEBOUNCE_INTERVAL, - .gpio = TEW_691GR_GPIO_BUTTON_WPS, - .active_low = 1, - }, - { - .desc = "RFKILL switch", - .type = EV_SW, - .code = KEY_RFKILL, - .debounce_interval = TEW_691GR_KEYS_DEBOUNCE_INTERVAL, - .gpio = TEW_691GR_GPIO_SWITCH_RFKILL, - .active_low = 1, - }, -}; - -static void __init tew_691gr_init(void) -{ - rt3883_gpio_init(RT3883_GPIO_MODE_I2C | - RT3883_GPIO_MODE_SPI | - RT3883_GPIO_MODE_UART0(RT3883_GPIO_MODE_GPIO) | - RT3883_GPIO_MODE_JTAG | - RT3883_GPIO_MODE_PCI(RT3883_GPIO_MODE_PCI_FNC)); - - rt3883_register_pflash(0); - - ramips_register_gpio_leds(-1, ARRAY_SIZE(tew_691gr_leds_gpio), - tew_691gr_leds_gpio); - - ramips_register_gpio_buttons(-1, TEW_691GR_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tew_691gr_gpio_buttons), - tew_691gr_gpio_buttons); - - rt3883_wlan_data.disable_5ghz = 1; - rt3883_register_wlan(); - - rt3883_eth_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - rt3883_eth_data.phy_mask = BIT(0); - rt3883_eth_data.tx_fc = 1; - rt3883_eth_data.rx_fc = 1; - rt3883_register_ethernet(); - - rt3883_register_wdt(false); -} - -MIPS_MACHINE(RAMIPS_MACH_TEW_691GR, "TEW-691GR", "TRENDnet TEW-691GR", - tew_691gr_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/mach-tew-692gr.c b/target/linux/ramips/files/arch/mips/ralink/rt3883/mach-tew-692gr.c deleted file mode 100644 index 59b520a371..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt3883/mach-tew-692gr.c +++ /dev/null @@ -1,147 +0,0 @@ -/* - * TRENDnet TEW-692GR board support - * - * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/ethtool.h> -#include <linux/pci.h> -#include <linux/phy.h> -#include <linux/rt2x00_platform.h> -#include <linux/ar8216_platform.h> - -#include <asm/mach-ralink/machine.h> -#include <asm/mach-ralink/dev-gpio-buttons.h> -#include <asm/mach-ralink/dev-gpio-leds.h> -#include <asm/mach-ralink/rt3883.h> -#include <asm/mach-ralink/rt3883_regs.h> -#include <asm/mach-ralink/ramips_eth_platform.h> - -#include "devices.h" - -#define TEW_692GR_GPIO_LED_WPS_ORANGE 9 -#define TEW_692GR_GPIO_LED_WPS_GREEN 28 - -#define TEW_692GR_GPIO_BUTTON_RESET 10 -#define TEW_692GR_GPIO_BUTTON_WPS 26 - -#define TEW_692GR_KEYS_POLL_INTERVAL 20 -#define TEW_692GR_KEYS_DEBOUNCE_INTERVAL (3 * TEW_692GR_KEYS_POLL_INTERVAL) - -static struct gpio_led tew_692gr_leds_gpio[] __initdata = { - { - .name = "trendnet:orange:wps", - .gpio = TEW_692GR_GPIO_LED_WPS_ORANGE, - .active_low = 1, - }, - { - .name = "trendnet:green:wps", - .gpio = TEW_692GR_GPIO_LED_WPS_GREEN, - .active_low = 1, - }, -}; - -static struct gpio_keys_button tew_692gr_gpio_buttons[] __initdata = { - { - .desc = "Reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = TEW_692GR_KEYS_DEBOUNCE_INTERVAL, - .gpio = TEW_692GR_GPIO_BUTTON_RESET, - .active_low = 1, - }, - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = TEW_692GR_KEYS_DEBOUNCE_INTERVAL, - .gpio = TEW_692GR_GPIO_BUTTON_WPS, - .active_low = 1, - }, -}; - -static struct ar8327_pad_cfg tew_692gr_ar8327_pad0_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .txclk_delay_en = true, - .rxclk_delay_en = true, - .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -}; - -static struct ar8327_pad_cfg tew_692gr_ar8327_pad6_cfg = { - .mode = AR8327_PAD_MAC_RGMII, - .rxclk_delay_en = true, - .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0, -}; - -static struct ar8327_led_cfg tew_692gr_ar8327_led_cfg = { - .led_ctrl0 = 0xc437c437, - .led_ctrl1 = 0xc337c337, - .led_ctrl2 = 0x00000000, - .led_ctrl3 = 0x03ffff00, - .open_drain = false, -}; - -static struct ar8327_platform_data tew_692gr_ar8327_data = { - .pad0_cfg = &tew_692gr_ar8327_pad0_cfg, - .pad6_cfg = &tew_692gr_ar8327_pad6_cfg, - .port0_cfg = { - .force_link = 1, - .speed = AR8327_PORT_SPEED_1000, - .duplex = 1, - .txpause = 1, - .rxpause = 1, - }, - .led_cfg = &tew_692gr_ar8327_led_cfg, -}; - -static struct mdio_board_info tew_692gr_mdio0_info[] = { - { - .bus_id = "ramips_mdio", - .phy_addr = 0, - .platform_data = &tew_692gr_ar8327_data, - }, -}; - -static void __init tew_692gr_init(void) -{ - rt3883_gpio_init(RT3883_GPIO_MODE_I2C | - RT3883_GPIO_MODE_SPI | - RT3883_GPIO_MODE_UART0(RT3883_GPIO_MODE_GPIO) | - RT3883_GPIO_MODE_JTAG | - RT3883_GPIO_MODE_PCI(RT3883_GPIO_MODE_PCI_FNC)); - - rt3883_register_pflash(0); - - ramips_register_gpio_leds(-1, ARRAY_SIZE(tew_692gr_leds_gpio), - tew_692gr_leds_gpio); - - ramips_register_gpio_buttons(-1, TEW_692GR_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tew_692gr_gpio_buttons), - tew_692gr_gpio_buttons); - - rt3883_wlan_data.disable_5ghz = 1; - rt3883_register_wlan(); - - mdiobus_register_board_info(tew_692gr_mdio0_info, - ARRAY_SIZE(tew_692gr_mdio0_info)); - - rt3883_eth_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; - rt3883_eth_data.phy_mask = BIT(0); - rt3883_eth_data.tx_fc = 1; - rt3883_eth_data.rx_fc = 1; - rt3883_register_ethernet(); - - rt3883_register_wdt(false); - - rt3883_pci_init(RT3883_PCI_MODE_PCIE); -} - -MIPS_MACHINE(RAMIPS_MACH_TEW_692GR, "TEW-692GR", "TRENDnet TEW-692GR", - tew_692gr_init); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/rt3883.c b/target/linux/ramips/files/arch/mips/ralink/rt3883/rt3883.c deleted file mode 100644 index e397b854ea..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt3883/rt3883.c +++ /dev/null @@ -1,216 +0,0 @@ -/* - * Ralink RT3662/RT3883 SoC specific setup - * - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * Parts of this file are based on Ralink's 2.6.21 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> - -#include <asm/mach-ralink/common.h> -#include <asm/mach-ralink/ramips_gpio.h> -#include <asm/mach-ralink/rt3883.h> -#include <asm/mach-ralink/rt3883_regs.h> - -void __iomem * rt3883_sysc_base; -void __iomem * rt3883_memc_base; - -void __init ramips_soc_prom_init(void) -{ - void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT3883_SYSC_BASE); - u32 n0; - u32 n1; - u32 id; - - n0 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID0_3); - n1 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID4_7); - id = __raw_readl(sysc + RT3883_SYSC_REG_REVID); - - snprintf(ramips_sys_type, RAMIPS_SYS_TYPE_LEN, - "Ralink %c%c%c%c%c%c%c%c ver:%u eco:%u", - (char) (n0 & 0xff), (char) ((n0 >> 8) & 0xff), - (char) ((n0 >> 16) & 0xff), (char) ((n0 >> 24) & 0xff), - (char) (n1 & 0xff), (char) ((n1 >> 8) & 0xff), - (char) ((n1 >> 16) & 0xff), (char) ((n1 >> 24) & 0xff), - (id >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK, - (id & RT3883_REVID_ECO_ID_MASK)); - - ramips_mem_base = RT3883_SDRAM_BASE; - ramips_mem_size_min = RT3883_MEM_SIZE_MIN; - ramips_mem_size_max = RT3883_MEM_SIZE_MAX; -} - -static struct ramips_gpio_chip rt3883_gpio_chips[] = { - { - .chip = { - .label = "RT3883-GPIO0", - .base = 0, - .ngpio = 24, - }, - .regs = { - [RAMIPS_GPIO_REG_INT] = 0x00, - [RAMIPS_GPIO_REG_EDGE] = 0x04, - [RAMIPS_GPIO_REG_RENA] = 0x08, - [RAMIPS_GPIO_REG_FENA] = 0x0c, - [RAMIPS_GPIO_REG_DATA] = 0x20, - [RAMIPS_GPIO_REG_DIR] = 0x24, - [RAMIPS_GPIO_REG_POL] = 0x28, - [RAMIPS_GPIO_REG_SET] = 0x2c, - [RAMIPS_GPIO_REG_RESET] = 0x30, - [RAMIPS_GPIO_REG_TOGGLE] = 0x34, - }, - .map_base = RT3883_PIO_BASE, - .map_size = RT3883_PIO_SIZE, - }, - { - .chip = { - .label = "RT3883-GPIO1", - .base = 24, - .ngpio = 16, - }, - .regs = { - [RAMIPS_GPIO_REG_INT] = 0x38, - [RAMIPS_GPIO_REG_EDGE] = 0x3c, - [RAMIPS_GPIO_REG_RENA] = 0x40, - [RAMIPS_GPIO_REG_FENA] = 0x44, - [RAMIPS_GPIO_REG_DATA] = 0x48, - [RAMIPS_GPIO_REG_DIR] = 0x4c, - [RAMIPS_GPIO_REG_POL] = 0x50, - [RAMIPS_GPIO_REG_SET] = 0x54, - [RAMIPS_GPIO_REG_RESET] = 0x58, - [RAMIPS_GPIO_REG_TOGGLE] = 0x5c, - }, - .map_base = RT3883_PIO_BASE, - .map_size = RT3883_PIO_SIZE, - }, - { - .chip = { - .label = "RT3883-GPIO2", - .base = 40, - .ngpio = 32, - }, - .regs = { - [RAMIPS_GPIO_REG_INT] = 0x60, - [RAMIPS_GPIO_REG_EDGE] = 0x64, - [RAMIPS_GPIO_REG_RENA] = 0x68, - [RAMIPS_GPIO_REG_FENA] = 0x6c, - [RAMIPS_GPIO_REG_DATA] = 0x70, - [RAMIPS_GPIO_REG_DIR] = 0x74, - [RAMIPS_GPIO_REG_POL] = 0x78, - [RAMIPS_GPIO_REG_SET] = 0x7c, - [RAMIPS_GPIO_REG_RESET] = 0x80, - [RAMIPS_GPIO_REG_TOGGLE] = 0x84, - }, - .map_base = RT3883_PIO_BASE, - .map_size = RT3883_PIO_SIZE, - }, - { - .chip = { - .label = "RT3883-GPIO3", - .base = 72, - .ngpio = 24, - }, - .regs = { - [RAMIPS_GPIO_REG_INT] = 0x88, - [RAMIPS_GPIO_REG_EDGE] = 0x8c, - [RAMIPS_GPIO_REG_RENA] = 0x90, - [RAMIPS_GPIO_REG_FENA] = 0x94, - [RAMIPS_GPIO_REG_DATA] = 0x98, - [RAMIPS_GPIO_REG_DIR] = 0x9c, - [RAMIPS_GPIO_REG_POL] = 0xa0, - [RAMIPS_GPIO_REG_SET] = 0xa4, - [RAMIPS_GPIO_REG_RESET] = 0xa8, - [RAMIPS_GPIO_REG_TOGGLE] = 0xac, - }, - .map_base = RT3883_PIO_BASE, - .map_size = RT3883_PIO_SIZE, - }, -}; - -static struct ramips_gpio_data rt3883_gpio_data = { - .chips = rt3883_gpio_chips, - .num_chips = ARRAY_SIZE(rt3883_gpio_chips), -}; - -static void rt3883_gpio_reserve(int first, int last) -{ - for (; first <= last; first++) - gpio_request(first, "reserved"); -} - -void __init rt3883_gpio_init(u32 mode) -{ - u32 t; - - rt3883_sysc_wr(mode, RT3883_SYSC_REG_GPIO_MODE); - - ramips_gpio_init(&rt3883_gpio_data); - if ((mode & RT3883_GPIO_MODE_I2C) == 0) - rt3883_gpio_reserve(RT3883_GPIO_I2C_SD, RT3883_GPIO_I2C_SCLK); - - if ((mode & RT3883_GPIO_MODE_SPI) == 0) - rt3883_gpio_reserve(RT3883_GPIO_SPI_CS0, RT3883_GPIO_SPI_MISO); - - t = mode >> RT3883_GPIO_MODE_UART0_SHIFT; - t &= RT3883_GPIO_MODE_UART0_MASK; - switch (t) { - case RT3883_GPIO_MODE_UARTF: - case RT3883_GPIO_MODE_PCM_UARTF: - case RT3883_GPIO_MODE_PCM_I2S: - case RT3883_GPIO_MODE_I2S_UARTF: - rt3883_gpio_reserve(RT3883_GPIO_7, RT3883_GPIO_14); - break; - case RT3883_GPIO_MODE_PCM_GPIO: - rt3883_gpio_reserve(RT3883_GPIO_11, RT3883_GPIO_14); - break; - case RT3883_GPIO_MODE_GPIO_UARTF: - case RT3883_GPIO_MODE_GPIO_I2S: - rt3883_gpio_reserve(RT3883_GPIO_7, RT3883_GPIO_10); - break; - } - - if ((mode & RT3883_GPIO_MODE_UART1) == 0) - rt3883_gpio_reserve(RT3883_GPIO_UART1_TXD, - RT3883_GPIO_UART1_RXD); - - if ((mode & RT3883_GPIO_MODE_JTAG) == 0) - rt3883_gpio_reserve(RT3883_GPIO_JTAG_TDO, - RT3883_GPIO_JTAG_TCLK); - - if ((mode & RT3883_GPIO_MODE_MDIO) == 0) - rt3883_gpio_reserve(RT3883_GPIO_MDIO_MDC, - RT3883_GPIO_MDIO_MDIO); - - if ((mode & RT3883_GPIO_MODE_GE1) == 0) - rt3883_gpio_reserve(RT3883_GPIO_GE1_TXD0, - RT3883_GPIO_GE1_RXCLK); - - if ((mode & RT3883_GPIO_MODE_GE2) == 0) - rt3883_gpio_reserve(RT3883_GPIO_GE2_TXD0, - RT3883_GPIO_GE2_RXCLK); - - t = mode >> RT3883_GPIO_MODE_PCI_SHIFT; - t &= RT3883_GPIO_MODE_PCI_MASK; - if (t != RT3883_GPIO_MODE_PCI_GPIO) - rt3883_gpio_reserve(RT3883_GPIO_PCI_AD0, - RT3883_GPIO_PCI_AD31); - - t = mode >> RT3883_GPIO_MODE_LNA_A_SHIFT; - t &= RT3883_GPIO_MODE_LNA_A_MASK; - if (t != RT3883_GPIO_MODE_LNA_A_GPIO) - rt3883_gpio_reserve(RT3883_GPIO_LNA_PE_A0, - RT3883_GPIO_LNA_PE_A2); - - t = mode >> RT3883_GPIO_MODE_LNA_G_SHIFT; - t &= RT3883_GPIO_MODE_LNA_G_MASK; - if (t != RT3883_GPIO_MODE_LNA_G_GPIO) - rt3883_gpio_reserve(RT3883_GPIO_LNA_PE_G0, - RT3883_GPIO_LNA_PE_G2); -} diff --git a/target/linux/ramips/files/arch/mips/ralink/rt3883/setup.c b/target/linux/ramips/files/arch/mips/ralink/rt3883/setup.c deleted file mode 100644 index 6e037a7291..0000000000 --- a/target/linux/ramips/files/arch/mips/ralink/rt3883/setup.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Ralink RT3662/RT3883 SoC specific setup - * - * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> - * - * Parts of this file are based on Ralink's 2.6.21 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/err.h> -#include <linux/clk.h> - -#include <asm/mips_machine.h> -#include <asm/reboot.h> -#include <asm/time.h> - -#include <asm/mach-ralink/common.h> -#include <asm/mach-ralink/rt3883.h> -#include <asm/mach-ralink/rt3883_regs.h> -#include "common.h" - -static void rt3883_restart(char *command) -{ - rt3883_sysc_wr(RT3883_RSTCTRL_SYS, RT3883_SYSC_REG_RSTCTRL); - while (1) - if (cpu_wait) - cpu_wait(); -} - -static void rt3883_halt(void) -{ - while (1) - if (cpu_wait) - cpu_wait(); -} - -unsigned int __cpuinit get_c0_compare_irq(void) -{ - return CP0_LEGACY_COMPARE_IRQ; -} - -void __init ramips_soc_setup(void) -{ - struct clk *clk; - - rt3883_sysc_base = ioremap_nocache(RT3883_SYSC_BASE, PAGE_SIZE); - rt3883_memc_base = ioremap_nocache(RT3883_MEMC_BASE, PAGE_SIZE); - - rt3883_clocks_init(); - - clk = clk_get(NULL, "cpu"); - if (IS_ERR(clk)) - panic("unable to get CPU clock, err=%ld", PTR_ERR(clk)); - - printk(KERN_INFO "%s running at %lu.%02lu MHz\n", ramips_sys_type, - clk_get_rate(clk) / 1000000, - (clk_get_rate(clk) % 1000000) * 100 / 1000000); - - _machine_restart = rt3883_restart; - _machine_halt = rt3883_halt; - pm_power_off = rt3883_halt; - - clk = clk_get(NULL, "uart"); - if (IS_ERR(clk)) - panic("unable to get UART clock, err=%ld", PTR_ERR(clk)); - - ramips_early_serial_setup(0, RT3883_UART0_BASE, clk_get_rate(clk), - RT3883_INTC_IRQ_UART0); - ramips_early_serial_setup(1, RT3883_UART1_BASE, clk_get_rate(clk), - RT3883_INTC_IRQ_UART1); -} - -void __init plat_time_init(void) -{ - struct clk *clk; - - clk = clk_get(NULL, "cpu"); - if (IS_ERR(clk)) - panic("unable to get CPU clock, err=%ld", PTR_ERR(clk)); - - mips_hpt_frequency = clk_get_rate(clk) / 2; -} |