diff options
Diffstat (limited to 'target/linux/ramips/files-3.7')
144 files changed, 39274 insertions, 0 deletions
diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/common.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/common.h new file mode 100644 index 0000000000..bb6e12bf86 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/common.h @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_RALINK_COMMON_H +#define __ASM_MACH_RALINK_COMMON_H + +#define RAMIPS_SYS_TYPE_LEN 64 +extern unsigned char ramips_sys_type[RAMIPS_SYS_TYPE_LEN]; +extern unsigned long ramips_mem_base; +extern unsigned long ramips_mem_size_min; +extern unsigned long ramips_mem_size_max; +extern unsigned long (*ramips_get_mem_size)(void); + +void ramips_intc_irq_init(unsigned intc_base, unsigned irq, unsigned irq_base); +u32 ramips_intc_get_status(void); + +void ramips_soc_prom_init(void); +void ramips_soc_setup(void); +void ramips_early_serial_setup(int line, unsigned base, unsigned freq, + unsigned irq); + +#endif /* __ASM_MACH_RALINK_COMMON_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/dev-gpio-buttons.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/dev-gpio-buttons.h new file mode 100644 index 0000000000..8eb5e16906 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/dev-gpio-buttons.h @@ -0,0 +1,29 @@ +/* + * Ralink SoC GPIO button support + * + * Copyright (C) 2010-2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_RALINK_DEV_GPIO_BUTTONS_H +#define __ASM_MACH_RALINK_DEV_GPIO_BUTTONS_H + +#include <linux/input.h> +#include <linux/gpio_keys.h> + +#ifdef CONFIG_RALINK_DEV_GPIO_BUTTONS +void +ramips_register_gpio_buttons(int id, unsigned poll_interval, unsigned nbuttons, + struct gpio_keys_button *buttons); +#else +static inline void +ramips_register_gpio_buttons(int id, unsigned poll_interval, unsigned nbuttons, + struct gpio_keys_button *buttons) +{ +} +#endif + +#endif /* __ASM_MACH_RALINK_DEV_GPIO_BUTTONS_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/dev-gpio-leds.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/dev-gpio-leds.h new file mode 100644 index 0000000000..24233abde6 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/dev-gpio-leds.h @@ -0,0 +1,26 @@ +/* + * Ralink SoC GPIO LED device support + * + * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_RALINK_DEV_GPIO_LEDS_H +#define __ASM_MACH_RALINK_DEV_GPIO_LEDS_H + +#include <linux/leds.h> + +#ifdef CONFIG_RALINK_DEV_GPIO_LEDS +void ramips_register_gpio_leds(int id, unsigned num_leds, + struct gpio_led *leds); +#else +static inline void ramips_register_gpio_leds(int id, unsigned num_leds, + struct gpio_led *leds) +{ +} +#endif + +#endif /* __ASM_MACH_RALINK_DEV_GPIO_LEDS_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/gpio.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/gpio.h new file mode 100644 index 0000000000..f68ee16856 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/gpio.h @@ -0,0 +1,24 @@ +/* + * Ralink SoC GPIO API support + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#ifndef __ASM_MACH_RALINK_GPIO_H +#define __ASM_MACH_RALINK_GPIO_H + +#define ARCH_NR_GPIOS 128 +#include <asm-generic/gpio.h> + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq + +#endif /* __ASM_MACH_RALINK_GPIO_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/machine.h new file mode 100644 index 0000000000..200f737f71 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/machine.h @@ -0,0 +1,88 @@ +/* + * Ralink machine types + * + * Copyright (C) 2010 Joonas Lahtinen <joonas.lahtinen@gmail.com> + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <asm/mips_machine.h> + +enum ramips_mach_type { + RAMIPS_MACH_GENERIC, + /* RT2880 based machines */ + RAMIPS_MACH_F5D8235_V1, /* Belkin F5D8235 v1 */ + RAMIPS_MACH_BR6524N, /* Edimax BR6524N */ + RAMIPS_MACH_RT_N15, /* Asus RT-N15 */ + RAMIPS_MACH_V11ST_FE, /* Ralink V11ST-FE */ + RAMIPS_MACH_WLI_TX4_AG300N, /* Buffalo WLI-TX4-AG300N */ + RAMIPS_MACH_WZR_AGL300NH, /* Buffalo WZR-AGL300NH */ + + /* RT3050 based machines */ + RAMIPS_MACH_3G_6200N, /* Edimax 3G-6200N */ + RAMIPS_MACH_ALL0256N, /* Allnet ALL0256N */ + RAMIPS_MACH_CARAMBOLA, /* 8devices Carambola */ + RAMIPS_MACH_DIR_300_B1, /* D-Link DIR-300 B1 */ + RAMIPS_MACH_DIR_600_B1, /* D-Link DIR-600 B1 */ + RAMIPS_MACH_DIR_600_B2, /* D-Link DIR-600 B2 */ + RAMIPS_MACH_DIR_615_D, /* D-Link DIR-615 D */ + RAMIPS_MACH_DIR_620_A1, /* D-Link DIR-620 A1 */ + RAMIPS_MACH_RT_G32_B1, /* Asus RT-G32 B1 */ + RAMIPS_MACH_RT_N10_PLUS, /* Asus RT-N10+ */ + RAMIPS_MACH_NW718, /* Netcore NW718 */ + RAMIPS_MACH_WL_330N, /* Asus WL-330N */ + RAMIPS_MACH_WL_330N3G, /* Asus WL-330N3G */ + + /* RT3052 based machines */ + RAMIPS_MACH_3G300M, /* Tenda 3G300M */ + RAMIPS_MACH_ALL0239_3G, /* ALL0239-3G */ + RAMIPS_MACH_ARGUS_ATP52B, /* Argus ATP-52B */ + RAMIPS_MACH_BC2, /* NexAira BC2 */ + RAMIPS_MACH_BR6425, /* Edimax BR-6425 */ + RAMIPS_MACH_BROADWAY, /* Hauppauge Broadway */ + RAMIPS_MACH_DAP_1350, /* D-Link DAP-1350 */ + RAMIPS_MACH_ESR_9753, /* Senao / EnGenius ESR-9753*/ + RAMIPS_MACH_F5D8235_V2, /* Belkin F5D8235 v2 */ + RAMIPS_MACH_FONERA20N, /* La Fonera 2.0N */ + RAMIPS_MACH_RT_N13U, /* ASUS RT-N13U */ + RAMIPS_MACH_FREESTATION5, /* ARC Freestation5 */ + RAMIPS_MACH_HW550_3G, /* Aztech HW550-3G */ + RAMIPS_MACH_MOFI3500_3GN, /* MoFi Network MOFI3500-3GN */ + RAMIPS_MACH_NBG_419N, /* ZyXEL NBG-419N */ + RAMIPS_MACH_OMNI_EMB, /* Omnima MiniEMBWiFi */ + RAMIPS_MACH_PSR_680W, /* Petatel PSR-680W Wireless 3G Router*/ + RAMIPS_MACH_PWH2004, /* Prolink 2004H / Abocom 5205 */ + RAMIPS_MACH_SL_R7205, /* Skylink SL-R7205 Wireless 3G Router*/ + RAMIPS_MACH_V22RW_2X2, /* Ralink AP-RT3052-V22RW-2X2 */ + RAMIPS_MACH_W306R_V20, /* Tenda W306R_V20 */ + RAMIPS_MACH_W502U, /* ALFA Networks W502U */ + RAMIPS_MACH_WCR150GN, /* Sparklan WCR-150GN */ + RAMIPS_MACH_WHR_G300N, /* Buffalo WHR-G300N */ + RAMIPS_MACH_WL341V3, /* Sitecom WL-341 v3 */ + RAMIPS_MACH_WL351, /* Sitecom WL-351 v1 002 */ + RAMIPS_MACH_WR512_3GN, /* SH-WR512NU/WS-WR512N1-like 3GN*/ + RAMIPS_MACH_WR6202, /* Accton WR6202 */ + RAMIPS_MACH_MZKW300NH2, /* Planex MZK-W300NH2 Router */ + RAMIPS_MACH_XDXRN502J, /* unknown XDX-RN502J */ + RAMIPS_MACH_UR_326N4G, /* UPVEL ROUTER */ + RAMIPS_MACH_UR_336UN, /* UPVEL ROUTER */ + + /* RT3352 based machines */ + RAMIPS_MACH_ALL5002, /* Allnet ALL5002 */ + RAMIPS_MACH_DIR_615_H1, + + /* RT3662 based machines */ + RAMIPS_MACH_DIR_645, /* D-Link DIR-645 */ + RAMIPS_MACH_OMNI_EMB_HPM, /* Omnima EMB HPM */ + RAMIPS_MACH_RT_N56U, /* Asus RT-N56U */ + + /* RT3883 based machines */ + RAMIPS_MACH_TEW_691GR, /* TRENDnet TEW-691GR */ + RAMIPS_MACH_TEW_692GR, /* TRENDnet TEW-692GR */ + + /* RT5350 based machines */ + RAMIPS_MACH_AIR3GII, /* AirLive Air3GII */ +}; diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_eth_platform.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_eth_platform.h new file mode 100644 index 0000000000..57c0556b93 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_eth_platform.h @@ -0,0 +1,41 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + * + * based on Ralink SDK3.3 + * Copyright (C) 2009 John Crispin <blogic@openwrt.org> + */ + +#ifndef _RAMIPS_ETH_PLATFORM_H +#define _RAMIPS_ETH_PLATFORM_H + +#include <linux/phy.h> + +struct ramips_eth_platform_data +{ + unsigned char mac[6]; + void (*reset_fe)(void); + int min_pkt_len; + unsigned long sys_freq; + + int speed; + int duplex; + int tx_fc; + int rx_fc; + + u32 phy_mask; + phy_interface_t phy_if_mode; +}; + +#endif /* _RAMIPS_ETH_PLATFORM_H */ + diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_gpio.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_gpio.h new file mode 100644 index 0000000000..32fc7a7402 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_gpio.h @@ -0,0 +1,48 @@ +/* + * Ralink SoC specific GPIO support + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RAMIPS_GPIO_H +#define _RAMIPS_GPIO_H + +#include <linux/gpio.h> +#include <linux/spinlock.h> + +enum ramips_gpio_reg { + RAMIPS_GPIO_REG_INT = 0, /* Interrupt status */ + RAMIPS_GPIO_REG_EDGE, + RAMIPS_GPIO_REG_RENA, + RAMIPS_GPIO_REG_FENA, + RAMIPS_GPIO_REG_DATA, + RAMIPS_GPIO_REG_DIR, /* Direction, 0:in, 1: out */ + RAMIPS_GPIO_REG_POL, /* Polarity, 0: normal, 1: invert */ + RAMIPS_GPIO_REG_SET, + RAMIPS_GPIO_REG_RESET, + RAMIPS_GPIO_REG_TOGGLE, + RAMIPS_GPIO_REG_MAX +}; + +struct ramips_gpio_chip { + struct gpio_chip chip; + unsigned long map_base; + unsigned long map_size; + u8 regs[RAMIPS_GPIO_REG_MAX]; + + spinlock_t lock; + void __iomem *regs_base; +}; + +struct ramips_gpio_data { + unsigned int num_chips; + struct ramips_gpio_chip *chips; +}; + +int ramips_gpio_init(struct ramips_gpio_data *data); + +#endif /* _RAMIPS_GPIO_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_nand_platform.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_nand_platform.h new file mode 100644 index 0000000000..54203db8ea --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/ramips_nand_platform.h @@ -0,0 +1,23 @@ +/* + * Platform data definition for the built-in NAND controller of the + * Ralink RT305X/RT3662/RT3883 SoCs + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RAMIPS_NAND_PLATFORM_H +#define _RAMIPS_NAND_PLATFORM_H + +#define RAMIPS_NAND_DRIVER_NAME "ramips-nand" + +struct ramips_nand_platform_data { + const char *name; + struct mtd_partition *parts; + int nr_parts; +}; + +#endif /* _RAMIPS_NAND_PLATFORM_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x.h new file mode 100644 index 0000000000..10d7263324 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x.h @@ -0,0 +1,76 @@ +/* + * Ralink RT288x SoC specific definitions + * + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT288X_H_ +#define _RT288X_H_ + +#include <linux/init.h> +#include <linux/io.h> + +#define RT288X_MEM_SIZE_MIN (2 * 1024 * 1024) +#define RT288X_MEM_SIZE_MAX (128 * 1024 * 1024) + +#define RT288X_CPU_IRQ_BASE 0 +#define RT288X_INTC_IRQ_BASE 8 +#define RT288X_INTC_IRQ_COUNT 32 +#define RT288X_GPIO_IRQ_BASE 40 + +#define RT288X_CPU_IRQ_INTC (RT288X_CPU_IRQ_BASE + 2) +#define RT288X_CPU_IRQ_PCI (RT288X_CPU_IRQ_BASE + 4) +#define RT288X_CPU_IRQ_FE (RT288X_CPU_IRQ_BASE + 5) +#define RT288X_CPU_IRQ_WNIC (RT288X_CPU_IRQ_BASE + 6) +#define RT288X_CPU_IRQ_COUNTER (RT288X_CPU_IRQ_BASE + 7) + +#define RT2880_INTC_IRQ_TIMER0 (RT288X_INTC_IRQ_BASE + 0) +#define RT2880_INTC_IRQ_TIMER1 (RT288X_INTC_IRQ_BASE + 1) +#define RT2880_INTC_IRQ_UART0 (RT288X_INTC_IRQ_BASE + 2) +#define RT2880_INTC_IRQ_PIO (RT288X_INTC_IRQ_BASE + 3) +#define RT2880_INTC_IRQ_PCM (RT288X_INTC_IRQ_BASE + 4) +#define RT2880_INTC_IRQ_UART1 (RT288X_INTC_IRQ_BASE + 8) +#define RT2880_INTC_IRQ_IA (RT288X_INTC_IRQ_BASE + 23) + +#define RT288X_GPIO_IRQ(x) (RT288X_GPIO_IRQ_BASE + (x)) +#define RT288X_GPIO_COUNT 32 + +extern void __iomem *rt288x_sysc_base; +extern void __iomem *rt288x_memc_base; + +static inline void rt288x_sysc_wr(u32 val, unsigned reg) +{ + __raw_writel(val, rt288x_sysc_base + reg); +} + +static inline u32 rt288x_sysc_rr(unsigned reg) +{ + return __raw_readl(rt288x_sysc_base + reg); +} + +static inline void rt288x_memc_wr(u32 val, unsigned reg) +{ + __raw_writel(val, rt288x_memc_base + reg); +} + +static inline u32 rt288x_memc_rr(unsigned reg) +{ + return __raw_readl(rt288x_memc_base + reg); +} + +void rt288x_gpio_init(u32 mode); + +#ifdef CONFIG_PCI +int rt288x_register_pci(void); +#else +static inline int rt288x_register_pci(void) { return 0; } +#endif /* CONFIG_PCI */ + +#endif /* _RT228X_H_ */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h new file mode 100644 index 0000000000..5e27363324 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h @@ -0,0 +1,56 @@ +/* + * Ralink RT288x specific CPU feature overrides + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This file was derived from: include/asm-mips/cpu-features.h + * Copyright (C) 2003, 2004 Ralf Baechle + * Copyright (C) 2004 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ +#ifndef __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H + +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_sb1_cache 0 +#define cpu_has_fpu 0 +#define cpu_has_32fpr 0 +#define cpu_has_counter 1 +#define cpu_has_watch 1 +#define cpu_has_divec 1 + +#define cpu_has_prefetch 1 +#define cpu_has_ejtag 1 +#define cpu_has_llsc 1 + +#define cpu_has_mips16 1 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 + +#define cpu_has_mips32r1 1 +#define cpu_has_mips32r2 1 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 + +#define cpu_has_64bits 0 +#define cpu_has_64bit_zero_reg 0 +#define cpu_has_64bit_gp_regs 0 +#define cpu_has_64bit_addresses 0 + +#define cpu_dcache_line_size() 16 +#define cpu_icache_line_size() 16 + +#endif /* __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x/irq.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x/irq.h new file mode 100644 index 0000000000..61264f3c6a --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x/irq.h @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ +#ifndef __ASM_MACH_RALINK_RT288X_IRQ_H +#define __ASM_MACH_RALINK_RT288X_IRQ_H + +#define MIPS_CPU_IRQ_BASE 0 +#define NR_IRQS 48 + +#include_next <irq.h> + +#endif /* __ASM_MACH_RALINK_RT288X_IRQ_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x_regs.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x_regs.h new file mode 100644 index 0000000000..b5f4812b5c --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt288x_regs.h @@ -0,0 +1,127 @@ +/* + * Ralink RT288x SoC register definitions + * + * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT288X_REGS_H_ +#define _RT288X_REGS_H_ + +#include <linux/bitops.h> + +#define RT2880_SYSC_BASE 0x00300000 +#define RT2880_TIMER_BASE 0x00300100 +#define RT2880_INTC_BASE 0x00300200 +#define RT2880_MEMC_BASE 0x00300300 +#define RT2880_UART0_BASE 0x00300500 +#define RT2880_PIO_BASE 0x00300600 +#define RT2880_I2C_BASE 0x00300900 +#define RT2880_SPI_BASE 0x00300b00 +#define RT2880_UART1_BASE 0x00300c00 +#define RT2880_FE_BASE 0x00400000 +#define RT2880_ROM_BASE 0x00410000 +#define RT2880_PCM_BASE 0x00420000 +#define RT2880_PCI_BASE 0x00440000 +#define RT2880_WMAC_BASE 0x00480000 +#define RT2880_FLASH1_BASE 0x01000000 +#define RT2880_FLASH0_BASE 0x1dc00000 +#define RT2880_SDRAM_BASE 0x08000000 + +#define RT2880_SYSC_SIZE 0x100 +#define RT2880_TIMER_SIZE 0x100 +#define RT2880_INTC_SIZE 0x100 +#define RT2880_MEMC_SIZE 0x100 +#define RT2880_UART0_SIZE 0x100 +#define RT2880_PIO_SIZE 0x100 +#define RT2880_UART1_SIZE 0x100 +#define RT2880_FLASH1_SIZE (16 * 1024 * 1024) +#define RT2880_FLASH0_SIZE (32 * 1024 * 1024) + +/* SYSC registers */ +#define SYSC_REG_CHIP_NAME0 0x000 /* Chip Name 0 */ +#define SYSC_REG_CHIP_NAME1 0x004 /* Chip Name 1 */ +#define SYSC_REG_CHIP_ID 0x00c /* Chip Identification */ +#define SYSC_REG_SYSTEM_CONFIG 0x010 /* System Configuration */ +#define SYSC_REG_CLKCFG 0x030 +#define SYSC_REG_RESET_CTRL 0x034 /* Reset Control*/ +#define SYSC_REG_RESET_STATUS 0x038 /* Reset Status*/ +#define SYSC_REG_GPIO_MODE 0x060 /* GPIO Purpose Select */ +#define SYSC_REG_IA_ADDRESS 0x310 /* Illegal Access Address */ +#define SYSC_REG_IA_TYPE 0x314 /* Illegal Access Type */ + +#define CHIP_ID_ID_MASK 0xff +#define CHIP_ID_ID_SHIFT 8 +#define CHIP_ID_REV_MASK 0xff + +#define SYSTEM_CONFIG_CPUCLK_SHIFT 20 +#define SYSTEM_CONFIG_CPUCLK_MASK 0x3 +#define SYSTEM_CONFIG_CPUCLK_250 0x0 +#define SYSTEM_CONFIG_CPUCLK_266 0x1 +#define SYSTEM_CONFIG_CPUCLK_280 0x2 +#define SYSTEM_CONFIG_CPUCLK_300 0x3 + +#define CLKCFG_SRAM_CS_N_WDT BIT(9) + +#define RT2880_RESET_SYSTEM BIT(0) +#define RT2880_RESET_TIMER BIT(1) +#define RT2880_RESET_INTC BIT(2) +#define RT2880_RESET_MEMC BIT(3) +#define RT2880_RESET_CPU BIT(4) +#define RT2880_RESET_UART0 BIT(5) +#define RT2880_RESET_PIO BIT(6) +#define RT2880_RESET_I2C BIT(9) +#define RT2880_RESET_SPI BIT(11) +#define RT2880_RESET_UART1 BIT(12) +#define RT2880_RESET_PCI BIT(16) +#define RT2880_RESET_WMAC BIT(17) +#define RT2880_RESET_FE BIT(18) +#define RT2880_RESET_PCM BIT(19) + +#define RT2880_GPIO_MODE_I2C BIT(0) +#define RT2880_GPIO_MODE_UART0 BIT(1) +#define RT2880_GPIO_MODE_SPI BIT(2) +#define RT2880_GPIO_MODE_UART1 BIT(3) +#define RT2880_GPIO_MODE_JTAG BIT(4) +#define RT2880_GPIO_MODE_MDIO BIT(5) +#define RT2880_GPIO_MODE_SDRAM BIT(6) +#define RT2880_GPIO_MODE_PCI BIT(7) + +#define RT2880_INTC_INT_TIMER0 BIT(0) +#define RT2880_INTC_INT_TIMER1 BIT(1) +#define RT2880_INTC_INT_UART0 BIT(2) +#define RT2880_INTC_INT_PIO BIT(3) +#define RT2880_INTC_INT_PCM BIT(4) +#define RT2880_INTC_INT_UART1 BIT(8) +#define RT2880_INTC_INT_IA BIT(23) +#define RT2880_INTC_INT_GLOBAL BIT(31) + +/* MEMC registers */ +#define MEMC_REG_SDRAM_CFG0 0x00 +#define MEMC_REG_SDRAM_CFG1 0x04 +#define MEMC_REG_FLASH_CFG0 0x08 +#define MEMC_REG_FLASH_CFG1 0x0c +#define MEMC_REG_IA_ADDR 0x10 +#define MEMC_REG_IA_TYPE 0x14 + +#define FLASH_CFG_WIDTH_SHIFT 26 +#define FLASH_CFG_WIDTH_MASK 0x3 +#define FLASH_CFG_WIDTH_8BIT 0x0 +#define FLASH_CFG_WIDTH_16BIT 0x1 +#define FLASH_CFG_WIDTH_32BIT 0x2 + +/* UART registers */ +#define UART_REG_RX 0 +#define UART_REG_TX 1 +#define UART_REG_IER 2 +#define UART_REG_IIR 3 +#define UART_REG_FCR 4 +#define UART_REG_LCR 5 +#define UART_REG_MCR 6 +#define UART_REG_LSR 7 + +#endif /* _RT288X_REGS_H_ */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x.h new file mode 100644 index 0000000000..c59135c1ab --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x.h @@ -0,0 +1,169 @@ +/* + * Ralink RT305x SoC specific definitions + * + * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT305X_H_ +#define _RT305X_H_ + +#include <linux/init.h> +#include <linux/io.h> + +enum rt305x_soc_type { + RT305X_SOC_UNKNOWN = 0, + RT305X_SOC_RT3050, + RT305X_SOC_RT3052, + RT305X_SOC_RT3350, + RT305X_SOC_RT3352, + RT305X_SOC_RT5350, +}; + +extern enum rt305x_soc_type rt305x_soc; + +static inline int soc_is_rt3050(void) +{ + return rt305x_soc == RT305X_SOC_RT3050; +} + +static inline int soc_is_rt3052(void) +{ + return rt305x_soc == RT305X_SOC_RT3052; +} + +static inline int soc_is_rt305x(void) +{ + return soc_is_rt3050() || soc_is_rt3052(); +} + +static inline int soc_is_rt3350(void) +{ + return rt305x_soc == RT305X_SOC_RT3350; +} + +static inline int soc_is_rt3352(void) +{ + return rt305x_soc == RT305X_SOC_RT3352; +} + +static inline int soc_is_rt5350(void) +{ + return rt305x_soc == RT305X_SOC_RT5350; +} + +#define RT305X_MEM_SIZE_MIN (2 * 1024 * 1024) +#define RT305X_MEM_SIZE_MAX (64 * 1024 * 1024) + +#define RT3352_MEM_SIZE_MIN (2 * 1024 * 1024) +#define RT3352_MEM_SIZE_MAX (256 * 1024 * 1024) + +#define RT305X_CPU_IRQ_BASE 0 +#define RT305X_INTC_IRQ_BASE 8 +#define RT305X_INTC_IRQ_COUNT 32 +#define RT305X_GPIO_IRQ_BASE 40 + +#define RT305X_CPU_IRQ_INTC (RT305X_CPU_IRQ_BASE + 2) +#define RT305X_CPU_IRQ_FE (RT305X_CPU_IRQ_BASE + 5) +#define RT305X_CPU_IRQ_WNIC (RT305X_CPU_IRQ_BASE + 6) +#define RT305X_CPU_IRQ_COUNTER (RT305X_CPU_IRQ_BASE + 7) + +#define RT305X_INTC_IRQ_SYSCTL (RT305X_INTC_IRQ_BASE + 0) +#define RT305X_INTC_IRQ_TIMER0 (RT305X_INTC_IRQ_BASE + 1) +#define RT305X_INTC_IRQ_TIMER1 (RT305X_INTC_IRQ_BASE + 2) +#define RT305X_INTC_IRQ_IA (RT305X_INTC_IRQ_BASE + 3) +#define RT305X_INTC_IRQ_PCM (RT305X_INTC_IRQ_BASE + 4) +#define RT305X_INTC_IRQ_UART0 (RT305X_INTC_IRQ_BASE + 5) +#define RT305X_INTC_IRQ_PIO (RT305X_INTC_IRQ_BASE + 6) +#define RT305X_INTC_IRQ_DMA (RT305X_INTC_IRQ_BASE + 7) +#define RT305X_INTC_IRQ_NAND (RT305X_INTC_IRQ_BASE + 8) +#define RT305X_INTC_IRQ_PERFC (RT305X_INTC_IRQ_BASE + 9) +#define RT305X_INTC_IRQ_I2S (RT305X_INTC_IRQ_BASE + 10) +#define RT305X_INTC_IRQ_UART1 (RT305X_INTC_IRQ_BASE + 12) +#define RT305X_INTC_IRQ_ESW (RT305X_INTC_IRQ_BASE + 17) +#define RT305X_INTC_IRQ_OTG (RT305X_INTC_IRQ_BASE + 18) + +extern void __iomem *rt305x_sysc_base; +extern void __iomem *rt305x_memc_base; + +static inline void rt305x_sysc_wr(u32 val, unsigned reg) +{ + __raw_writel(val, rt305x_sysc_base + reg); +} + +static inline u32 rt305x_sysc_rr(unsigned reg) +{ + return __raw_readl(rt305x_sysc_base + reg); +} + +static inline void rt305x_memc_wr(u32 val, unsigned reg) +{ + __raw_writel(val, rt305x_memc_base + reg); +} + +static inline u32 rt305x_memc_rr(unsigned reg) +{ + return __raw_readl(rt305x_memc_base + reg); +} + +#define RT305X_GPIO_I2C_SD 1 +#define RT305X_GPIO_I2C_SCLK 2 +#define RT305X_GPIO_SPI_EN 3 +#define RT305X_GPIO_SPI_CLK 4 +#define RT305X_GPIO_SPI_DOUT 5 +#define RT305X_GPIO_SPI_DIN 6 +/* GPIO 7-14 is shared between UART0, PCM and I2S interfaces */ +#define RT305X_GPIO_7 7 +#define RT305X_GPIO_8 8 +#define RT305X_GPIO_9 9 +#define RT305X_GPIO_10 10 +#define RT305X_GPIO_11 11 +#define RT305X_GPIO_12 12 +#define RT305X_GPIO_13 13 +#define RT305X_GPIO_14 14 +#define RT305X_GPIO_UART1_TXD 15 +#define RT305X_GPIO_UART1_RXD 16 +#define RT305X_GPIO_JTAG_TDO 17 +#define RT305X_GPIO_JTAG_TDI 18 +#define RT305X_GPIO_JTAG_TMS 19 +#define RT305X_GPIO_JTAG_TCLK 20 +#define RT305X_GPIO_JTAG_TRST_N 21 +#define RT305X_GPIO_MDIO_MDC 22 +#define RT305X_GPIO_MDIO_MDIO 23 +#define RT305X_GPIO_SDRAM_MD16 24 +#define RT305X_GPIO_SDRAM_MD17 25 +#define RT305X_GPIO_SDRAM_MD18 26 +#define RT305X_GPIO_SDRAM_MD19 27 +#define RT305X_GPIO_SDRAM_MD20 28 +#define RT305X_GPIO_SDRAM_MD21 29 +#define RT305X_GPIO_SDRAM_MD22 30 +#define RT305X_GPIO_SDRAM_MD23 31 +#define RT305X_GPIO_SDRAM_MD24 32 +#define RT305X_GPIO_SDRAM_MD25 33 +#define RT305X_GPIO_SDRAM_MD26 34 +#define RT305X_GPIO_SDRAM_MD27 35 +#define RT305X_GPIO_SDRAM_MD28 36 +#define RT305X_GPIO_SDRAM_MD29 37 +#define RT305X_GPIO_SDRAM_MD30 38 +#define RT305X_GPIO_SDRAM_MD31 39 +#define RT305X_GPIO_GE0_TXD0 40 +#define RT305X_GPIO_GE0_TXD1 41 +#define RT305X_GPIO_GE0_TXD2 42 +#define RT305X_GPIO_GE0_TXD3 43 +#define RT305X_GPIO_GE0_TXEN 44 +#define RT305X_GPIO_GE0_TXCLK 45 +#define RT305X_GPIO_GE0_RXD0 46 +#define RT305X_GPIO_GE0_RXD1 47 +#define RT305X_GPIO_GE0_RXD2 48 +#define RT305X_GPIO_GE0_RXD3 49 +#define RT305X_GPIO_GE0_RXDV 50 +#define RT305X_GPIO_GE0_RXCLK 51 + +void rt305x_gpio_init(u32 mode); + +#endif /* _RT305X_H_ */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h new file mode 100644 index 0000000000..8c1261106c --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h @@ -0,0 +1,56 @@ +/* + * Ralink RT305x specific CPU feature overrides + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This file was derived from: include/asm-mips/cpu-features.h + * Copyright (C) 2003, 2004 Ralf Baechle + * Copyright (C) 2004 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ +#ifndef __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H + +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_sb1_cache 0 +#define cpu_has_fpu 0 +#define cpu_has_32fpr 0 +#define cpu_has_counter 1 +#define cpu_has_watch 1 +#define cpu_has_divec 1 + +#define cpu_has_prefetch 1 +#define cpu_has_ejtag 1 +#define cpu_has_llsc 1 + +#define cpu_has_mips16 1 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 + +#define cpu_has_mips32r1 1 +#define cpu_has_mips32r2 1 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#define cpu_has_dsp 1 +#define cpu_has_mipsmt 0 + +#define cpu_has_64bits 0 +#define cpu_has_64bit_zero_reg 0 +#define cpu_has_64bit_gp_regs 0 +#define cpu_has_64bit_addresses 0 + +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 32 + +#endif /* __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x/irq.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x/irq.h new file mode 100644 index 0000000000..a72d677142 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x/irq.h @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ +#ifndef __ASM_MACH_RALINK_RT305X_IRQ_H +#define __ASM_MACH_RALINK_RT305X_IRQ_H + +#define MIPS_CPU_IRQ_BASE 0 +#define NR_IRQS 48 + +#include_next <irq.h> + +#endif /* __ASM_MACH_RALINK_RT305X_IRQ_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h new file mode 100644 index 0000000000..2098c5cc1f --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h @@ -0,0 +1,27 @@ +/* + * Ralink RT305x SoC platform device registration + * + * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT305X_ESW_PLATFORM_H +#define _RT305X_ESW_PLATFORM_H + +enum { + RT305X_ESW_VLAN_CONFIG_NONE = 0, + RT305X_ESW_VLAN_CONFIG_LLLLW, + RT305X_ESW_VLAN_CONFIG_WLLLL, +}; + +struct rt305x_esw_platform_data +{ + u8 vlan_config; + u32 reg_initval_fct2; + u32 reg_initval_fpa2; +}; + +#endif /* _RT305X_ESW_PLATFORM_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x_regs.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x_regs.h new file mode 100644 index 0000000000..943facb6de --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt305x_regs.h @@ -0,0 +1,216 @@ +/* + * Ralink RT305 SoC register definitions + * + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT305X_REGS_H_ +#define _RT305X_REGS_H_ + +#include <linux/bitops.h> + +#define RT305X_SDRAM_BASE 0x00000000 +#define RT305X_SYSC_BASE 0x10000000 +#define RT305X_TIMER_BASE 0x10000100 +#define RT305X_INTC_BASE 0x10000200 +#define RT305X_MEMC_BASE 0x10000300 +#define RT305X_PCM_BASE 0x10000400 +#define RT305X_UART0_BASE 0x10000500 +#define RT305X_PIO_BASE 0x10000600 +#define RT305X_GDMA_BASE 0x10000700 +#define RT305X_NANDC_BASE 0x10000800 +#define RT305X_I2C_BASE 0x10000900 +#define RT305X_I2S_BASE 0x10000a00 +#define RT305X_SPI_BASE 0x10000b00 +#define RT305X_UART1_BASE 0x10000c00 +#define RT305X_FE_BASE 0x10100000 +#define RT305X_SWITCH_BASE 0x10110000 +#define RT305X_WMAC_BASE 0x10180000 +#define RT305X_OTG_BASE 0x101c0000 +#define RT305X_ROM_BASE 0x00400000 +#define RT305X_FLASH1_BASE 0x1b000000 +#define RT305X_FLASH0_BASE 0x1f000000 + +#define RT305X_SYSC_SIZE 0x100 +#define RT305X_TIMER_SIZE 0x100 +#define RT305X_INTC_SIZE 0x100 +#define RT305X_MEMC_SIZE 0x100 +#define RT305X_UART0_SIZE 0x100 +#define RT305X_PIO_SIZE 0x100 +#define RT305X_UART1_SIZE 0x100 +#define RT305X_SPI_SIZE 0x100 +#define RT305X_FLASH1_SIZE (16 * 1024 * 1024) +#define RT305X_FLASH0_SIZE (8 * 1024 * 1024) + +#define RT3352_EHCI_BASE 0x101c0000 +#define RT3352_EHCI_SIZE 0x1000 +#define RT3352_OHCI_BASE 0x101c1000 +#define RT3352_OHCI_SIZE 0x1000 + +/* SYSC registers */ +#define SYSC_REG_CHIP_NAME0 0x000 /* Chip Name 0 */ +#define SYSC_REG_CHIP_NAME1 0x004 /* Chip Name 1 */ +#define SYSC_REG_CHIP_ID 0x00c /* Chip Identification */ +#define SYSC_REG_SYSTEM_CONFIG 0x010 /* System Configuration */ +#define SYSC_REG_RESET_CTRL 0x034 /* Reset Control*/ +#define SYSC_REG_RESET_STATUS 0x038 /* Reset Status*/ +#define SYSC_REG_GPIO_MODE 0x060 /* GPIO Purpose Select */ +#define SYSC_REG_IA_ADDRESS 0x310 /* Illegal Access Address */ +#define SYSC_REG_IA_TYPE 0x314 /* Illegal Access Type */ + +#define RT3352_SYSC_REG_SYSCFG1 0x014 +#define RT3352_SYSC_REG_CLKCFG1 0x030 +#define RT3352_SYSC_REG_RSTCTRL 0x034 +#define RT3352_SYSC_REG_USB_PS 0x05c + +#define RT3052_CHIP_NAME0 0x30335452 +#define RT3052_CHIP_NAME1 0x20203235 + +#define RT3350_CHIP_NAME0 0x33335452 +#define RT3350_CHIP_NAME1 0x20203035 + +#define RT3352_CHIP_NAME0 0x33335452 +#define RT3352_CHIP_NAME1 0x20203235 + +#define RT5350_CHIP_NAME0 0x33355452 +#define RT5350_CHIP_NAME1 0x20203035 + +#define CHIP_ID_ID_MASK 0xff +#define CHIP_ID_ID_SHIFT 8 +#define CHIP_ID_REV_MASK 0xff + +#define RT305X_SYSCFG_CPUCLK_SHIFT 18 +#define RT305X_SYSCFG_CPUCLK_MASK 0x1 +#define RT305X_SYSCFG_CPUCLK_LOW 0x0 +#define RT305X_SYSCFG_CPUCLK_HIGH 0x1 +#define RT305X_SYSCFG_SRAM_CS0_MODE_SHIFT 2 +#define RT305X_SYSCFG_SRAM_CS0_MODE_MASK 0x3 +#define RT305X_SYSCFG_SRAM_CS0_MODE_NORMAL 0 +#define RT305X_SYSCFG_SRAM_CS0_MODE_WDT 1 +#define RT305X_SYSCFG_SRAM_CS0_MODE_BTCOEX 2 + +#define RT3352_SYSCFG0_CPUCLK_SHIFT 8 +#define RT3352_SYSCFG0_CPUCLK_MASK 0x1 +#define RT3352_SYSCFG0_CPUCLK_LOW 0x0 +#define RT3352_SYSCFG0_CPUCLK_HIGH 0x1 + +#define RT5350_SYSCFG0_CPUCLK_SHIFT 8 +#define RT5350_SYSCFG0_CPUCLK_MASK 0x3 +#define RT5350_SYSCFG0_CPUCLK_360 0x0 +#define RT5350_SYSCFG0_CPUCLK_320 0x2 +#define RT5350_SYSCFG0_CPUCLK_300 0x3 +#define RT5350_SYSCFG0_DRAM_SIZE_SHIFT 12 +#define RT5350_SYSCFG0_DRAM_SIZE_MASK 7 +#define RT5350_SYSCFG0_DRAM_SIZE_2M 0 +#define RT5350_SYSCFG0_DRAM_SIZE_8M 1 +#define RT5350_SYSCFG0_DRAM_SIZE_16M 2 +#define RT5350_SYSCFG0_DRAM_SIZE_32M 3 +#define RT5350_SYSCFG0_DRAM_SIZE_64M 4 + +#define RT3352_SYSCFG0_XTAL_SEL BIT(20) + +#define RT3352_SYSCFG1_USB0_HOST_MODE BIT(10) + +#define RT3352_CLKCFG1_UPHY0_CLK_EN BIT(18) +#define RT3352_CLKCFG1_UPHY1_CLK_EN BIT(20) + +#define RT305X_GPIO_MODE_I2C BIT(0) +#define RT305X_GPIO_MODE_SPI BIT(1) +#define RT305X_GPIO_MODE_UART0_SHIFT 2 +#define RT305X_GPIO_MODE_UART0_MASK 0x7 +#define RT305X_GPIO_MODE_UART0(x) ((x) << RT305X_GPIO_MODE_UART0_SHIFT) +#define RT305X_GPIO_MODE_UARTF 0x0 +#define RT305X_GPIO_MODE_PCM_UARTF 0x1 +#define RT305X_GPIO_MODE_PCM_I2S 0x2 +#define RT305X_GPIO_MODE_I2S_UARTF 0x3 +#define RT305X_GPIO_MODE_PCM_GPIO 0x4 +#define RT305X_GPIO_MODE_GPIO_UARTF 0x5 +#define RT305X_GPIO_MODE_GPIO_I2S 0x6 +#define RT305X_GPIO_MODE_GPIO 0x7 +#define RT305X_GPIO_MODE_UART1 BIT(5) +#define RT305X_GPIO_MODE_JTAG BIT(6) +#define RT305X_GPIO_MODE_MDIO BIT(7) +#define RT305X_GPIO_MODE_SDRAM BIT(8) +#define RT305X_GPIO_MODE_RGMII BIT(9) + +#define RT305X_RESET_SYSTEM BIT(0) +#define RT305X_RESET_TIMER BIT(8) +#define RT305X_RESET_INTC BIT(9) +#define RT305X_RESET_MEMC BIT(10) +#define RT305X_RESET_PCM BIT(11) +#define RT305X_RESET_UART0 BIT(12) +#define RT305X_RESET_PIO BIT(13) +#define RT305X_RESET_DMA BIT(14) +#define RT305X_RESET_I2C BIT(16) +#define RT305X_RESET_I2S BIT(17) +#define RT305X_RESET_SPI BIT(18) +#define RT305X_RESET_UART1 BIT(19) +#define RT305X_RESET_WNIC BIT(20) +#define RT305X_RESET_FE BIT(21) +#define RT305X_RESET_OTG BIT(22) +#define RT305X_RESET_ESW BIT(23) + +#define RT3352_RSTCTRL_SYS BIT(0) +#define RT3352_RSTCTRL_TIMER BIT(8) +#define RT3352_RSTCTRL_INTC BIT(9) +#define RT3352_RSTCTRL_MEMC BIT(10) +#define RT3352_RSTCTRL_PCM BIT(11) +#define RT3352_RSTCTRL_UART0 BIT(12) +#define RT3352_RSTCTRL_PIO BIT(13) +#define RT3352_RSTCTRL_DMA BIT(14) +#define RT3352_RSTCTRL_I2C BIT(16) +#define RT3352_RSTCTRL_I2S BIT(17) +#define RT3352_RSTCTRL_SPI BIT(18) +#define RT3352_RSTCTRL_UART1 BIT(19) +#define RT3352_RSTCTRL_WNIC BIT(20) +#define RT3352_RSTCTRL_FE BIT(21) +#define RT3352_RSTCTRL_UHST BIT(22) +#define RT3352_RSTCTRL_ESW BIT(23) +#define RT3352_RSTCTRL_EPHY BIT(24) +#define RT3352_RSTCTRL_UDEV BIT(25) + +#define RT305X_INTC_INT_SYSCTL BIT(0) +#define RT305X_INTC_INT_TIMER0 BIT(1) +#define RT305X_INTC_INT_TIMER1 BIT(2) +#define RT305X_INTC_INT_IA BIT(3) +#define RT305X_INTC_INT_PCM BIT(4) +#define RT305X_INTC_INT_UART0 BIT(5) +#define RT305X_INTC_INT_PIO BIT(6) +#define RT305X_INTC_INT_DMA BIT(7) +#define RT305X_INTC_INT_NAND BIT(8) +#define RT305X_INTC_INT_PERFC BIT(9) +#define RT305X_INTC_INT_I2S BIT(10) +#define RT305X_INTC_INT_UART1 BIT(12) +#define RT305X_INTC_INT_ESW BIT(17) +#define RT305X_INTC_INT_OTG BIT(18) +#define RT305X_INTC_INT_GLOBAL BIT(31) + +/* MEMC registers */ +#define MEMC_REG_SDRAM_CFG0 0x00 +#define MEMC_REG_SDRAM_CFG1 0x04 +#define MEMC_REG_FLASH_CFG0 0x08 +#define MEMC_REG_FLASH_CFG1 0x0c +#define MEMC_REG_IA_ADDR 0x10 +#define MEMC_REG_IA_TYPE 0x14 + +#define FLASH_CFG_WIDTH_SHIFT 26 +#define FLASH_CFG_WIDTH_MASK 0x3 +#define FLASH_CFG_WIDTH_8BIT 0x0 +#define FLASH_CFG_WIDTH_16BIT 0x1 +#define FLASH_CFG_WIDTH_32BIT 0x2 + +/* UART registers */ +#define UART_REG_RX 0 +#define UART_REG_TX 1 +#define UART_REG_IER 2 +#define UART_REG_IIR 3 +#define UART_REG_FCR 4 +#define UART_REG_LCR 5 +#define UART_REG_MCR 6 +#define UART_REG_LSR 7 + +#endif /* _RT305X_REGS_H_ */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883.h new file mode 100644 index 0000000000..cf8fb6fd10 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883.h @@ -0,0 +1,152 @@ +/* + * Ralink RT3662/RT3883 SoC specific definitions + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT3883_H_ +#define _RT3883_H_ + +#include <linux/init.h> +#include <linux/io.h> + +#define RT3883_MEM_SIZE_MIN (2 * 1024 * 1024) +#define RT3883_MEM_SIZE_MAX (256 * 1024 * 1024) + +#define RT3883_CPU_IRQ_BASE 0 +#define RT3883_CPU_IRQ_COUNT 8 +#define RT3883_INTC_IRQ_BASE (RT3883_CPU_IRQ_BASE + RT3883_CPU_IRQ_COUNT) +#define RT3883_INTC_IRQ_COUNT 32 +#define RT3883_GPIO_IRQ_BASE (RT3883_INTC_IRQ_BASE + RT3883_INTC_IRQ_COUNT) +#define RT3883_GPIO_IRQ_COUNT 96 +#define RT3883_PCI_IRQ_BASE (RT3883_GPIO_IRQ_BASE + RT3883_GPIO_IRQ_COUNT) +#define RT3883_PCI_IRQ_COUNT 3 + +#define RT3883_CPU_IRQ_INTC (RT3883_CPU_IRQ_BASE + 2) +#define RT3883_CPU_IRQ_PCI (RT3883_CPU_IRQ_BASE + 4) +#define RT3883_CPU_IRQ_FE (RT3883_CPU_IRQ_BASE + 5) +#define RT3883_CPU_IRQ_WLAN (RT3883_CPU_IRQ_BASE + 6) +#define RT3883_CPU_IRQ_COUNTER (RT3883_CPU_IRQ_BASE + 7) + +#define RT3883_INTC_IRQ_SYSCTL (RT3883_INTC_IRQ_BASE + 0) +#define RT3883_INTC_IRQ_TIMER0 (RT3883_INTC_IRQ_BASE + 1) +#define RT3883_INTC_IRQ_TIMER1 (RT3883_INTC_IRQ_BASE + 2) +#define RT3883_INTC_IRQ_IA (RT3883_INTC_IRQ_BASE + 3) +#define RT3883_INTC_IRQ_PCM (RT3883_INTC_IRQ_BASE + 4) +#define RT3883_INTC_IRQ_UART0 (RT3883_INTC_IRQ_BASE + 5) +#define RT3883_INTC_IRQ_PIO (RT3883_INTC_IRQ_BASE + 6) +#define RT3883_INTC_IRQ_DMA (RT3883_INTC_IRQ_BASE + 7) +#define RT3883_INTC_IRQ_NAND (RT3883_INTC_IRQ_BASE + 8) +#define RT3883_INTC_IRQ_PERFC (RT3883_INTC_IRQ_BASE + 9) +#define RT3883_INTC_IRQ_I2S (RT3883_INTC_IRQ_BASE + 10) +#define RT3883_INTC_IRQ_UART1 (RT3883_INTC_IRQ_BASE + 12) +#define RT3883_INTC_IRQ_UHST (RT3883_INTC_IRQ_BASE + 18) +#define RT3883_INTC_IRQ_UDEV (RT3883_INTC_IRQ_BASE + 19) + +#define RT3883_PCI_IRQ_PCI0 (RT3883_PCI_IRQ_BASE + 0) +#define RT3883_PCI_IRQ_PCI1 (RT3883_PCI_IRQ_BASE + 1) +#define RT3883_PCI_IRQ_PCIE (RT3883_PCI_IRQ_BASE + 2) + +extern void __iomem *rt3883_sysc_base; +extern void __iomem *rt3883_memc_base; + +static inline void rt3883_sysc_wr(u32 val, unsigned reg) +{ + __raw_writel(val, rt3883_sysc_base + reg); +} + +static inline u32 rt3883_sysc_rr(unsigned reg) +{ + return __raw_readl(rt3883_sysc_base + reg); +} + +static inline void rt3883_memc_wr(u32 val, unsigned reg) +{ + __raw_writel(val, rt3883_memc_base + reg); +} + +static inline u32 rt3883_memc_rr(unsigned reg) +{ + return __raw_readl(rt3883_memc_base + reg); +} + +#define RT3883_GPIO_I2C_SD 1 +#define RT3883_GPIO_I2C_SCLK 2 +#define RT3883_GPIO_SPI_CS0 3 +#define RT3883_GPIO_SPI_CLK 4 +#define RT3883_GPIO_SPI_MOSI 5 +#define RT3883_GPIO_SPI_MISO 6 +/* GPIO 7-14 is shared between UART0, PCM and I2S interfaces */ +#define RT3883_GPIO_7 7 +#define RT3883_GPIO_8 8 +#define RT3883_GPIO_9 9 +#define RT3883_GPIO_10 10 +#define RT3883_GPIO_11 11 +#define RT3883_GPIO_12 12 +#define RT3883_GPIO_13 13 +#define RT3883_GPIO_14 14 +#define RT3883_GPIO_UART1_TXD 15 +#define RT3883_GPIO_UART1_RXD 16 +#define RT3883_GPIO_JTAG_TDO 17 +#define RT3883_GPIO_JTAG_TDI 18 +#define RT3883_GPIO_JTAG_TMS 19 +#define RT3883_GPIO_JTAG_TCLK 20 +#define RT3883_GPIO_JTAG_TRST_N 21 +#define RT3883_GPIO_MDIO_MDC 22 +#define RT3883_GPIO_MDIO_MDIO 23 +#define RT3883_GPIO_LNA_PE_A0 32 +#define RT3883_GPIO_LNA_PE_A1 33 +#define RT3883_GPIO_LNA_PE_A2 34 +#define RT3883_GPIO_LNA_PE_G0 35 +#define RT3883_GPIO_LNA_PE_G1 36 +#define RT3883_GPIO_LNA_PE_G2 37 +#define RT3883_GPIO_PCI_AD0 40 +#define RT3883_GPIO_PCI_AD31 71 +#define RT3883_GPIO_GE2_TXD0 72 +#define RT3883_GPIO_GE2_TXD1 73 +#define RT3883_GPIO_GE2_TXD2 74 +#define RT3883_GPIO_GE2_TXD3 75 +#define RT3883_GPIO_GE2_TXEN 76 +#define RT3883_GPIO_GE2_TXCLK 77 +#define RT3883_GPIO_GE2_RXD0 78 +#define RT3883_GPIO_GE2_RXD1 79 +#define RT3883_GPIO_GE2_RXD2 80 +#define RT3883_GPIO_GE2_RXD3 81 +#define RT3883_GPIO_GE2_RXDV 82 +#define RT3883_GPIO_GE2_RXCLK 83 +#define RT3883_GPIO_GE1_TXD0 84 +#define RT3883_GPIO_GE1_TXD1 85 +#define RT3883_GPIO_GE1_TXD2 86 +#define RT3883_GPIO_GE1_TXD3 87 +#define RT3883_GPIO_GE1_TXEN 88 +#define RT3883_GPIO_GE1_TXCLK 89 +#define RT3883_GPIO_GE1_RXD0 90 +#define RT3883_GPIO_GE1_RXD1 91 +#define RT3883_GPIO_GE1_RXD2 92 +#define RT3883_GPIO_GE1_RXD3 93 +#define RT3883_GPIO_GE1_RXDV 94 +#define RT3883_GPIO_GE1_RXCLK 95 + +void rt3883_gpio_init(u32 mode); + +#define RT3883_PCI_MODE_PCI 0x01 +#define RT3883_PCI_MODE_PCIE 0x02 +#define RT3883_PCI_MODE_BOTH (RT3883_PCI_MODE_PCI | RT3883_PCI_MODE_PCIE) + +struct pci_dev; + +#ifdef CONFIG_PCI +void rt3883_pci_init(unsigned mode); +void rt3883_pci_set_plat_dev_init(int (*f)(struct pci_dev *)); +#else +static inline void rt3883_pci_init(unsigned mode) {} +static inline void rt3883_pci_set_plat_dev_init(int (*f)(struct pci_dev *)) {} +#endif /* CONFIG_PCI */ + +#endif /* _RT3883_H_ */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h new file mode 100644 index 0000000000..ac435dd330 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h @@ -0,0 +1,55 @@ +/* + * Ralink RT3662/RT3883 specific CPU feature overrides + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This file was derived from: include/asm-mips/cpu-features.h + * Copyright (C) 2003, 2004 Ralf Baechle + * Copyright (C) 2004 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ +#ifndef __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H + +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_sb1_cache 0 +#define cpu_has_fpu 0 +#define cpu_has_32fpr 0 +#define cpu_has_counter 1 +#define cpu_has_watch 1 +#define cpu_has_divec 1 + +#define cpu_has_prefetch 1 +#define cpu_has_ejtag 1 +#define cpu_has_llsc 1 + +#define cpu_has_mips16 1 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 + +#define cpu_has_mips32r1 1 +#define cpu_has_mips32r2 1 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#define cpu_has_dsp 1 +#define cpu_has_mipsmt 0 + +#define cpu_has_64bits 0 +#define cpu_has_64bit_zero_reg 0 +#define cpu_has_64bit_gp_regs 0 +#define cpu_has_64bit_addresses 0 + +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 32 + +#endif /* __ASM_MACH_RALINK_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883/irq.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883/irq.h new file mode 100644 index 0000000000..635d68c101 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883/irq.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ +#ifndef __ASM_MACH_RALINK_RT3883_IRQ_H +#define __ASM_MACH_RALINK_RT3883_IRQ_H + +#define MIPS_CPU_IRQ_BASE 0 +#define NR_IRQS 140 + +#include_next <irq.h> + +#endif /* __ASM_MACH_RALINK_RT3883_IRQ_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883_regs.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883_regs.h new file mode 100644 index 0000000000..b36cabe858 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/rt3883_regs.h @@ -0,0 +1,207 @@ +/* + * Ralink RT3662/RT3883 SoC register definitions + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT3883_REGS_H_ +#define _RT3883_REGS_H_ + +#include <linux/bitops.h> + +#define RT3883_SDRAM_BASE 0x00000000 +#define RT3883_SYSC_BASE 0x10000000 +#define RT3883_TIMER_BASE 0x10000100 +#define RT3883_INTC_BASE 0x10000200 +#define RT3883_MEMC_BASE 0x10000300 +#define RT3883_UART0_BASE 0x10000500 +#define RT3883_PIO_BASE 0x10000600 +#define RT3883_FSCC_BASE 0x10000700 +#define RT3883_NANDC_BASE 0x10000810 +#define RT3883_I2C_BASE 0x10000900 +#define RT3883_I2S_BASE 0x10000a00 +#define RT3883_SPI_BASE 0x10000b00 +#define RT3883_UART1_BASE 0x10000c00 +#define RT3883_PCM_BASE 0x10002000 +#define RT3883_GDMA_BASE 0x10002800 +#define RT3883_CODEC1_BASE 0x10003000 +#define RT3883_CODEC2_BASE 0x10003800 +#define RT3883_FE_BASE 0x10100000 +#define RT3883_ROM_BASE 0x10118000 +#define RT3883_USBDEV_BASE 0x10112000 +#define RT3883_PCI_BASE 0x10140000 +#define RT3883_WLAN_BASE 0x10180000 +#define RT3883_USBHOST_BASE 0x101c0000 +#define RT3883_BOOT_BASE 0x1c000000 +#define RT3883_SRAM_BASE 0x1e000000 +#define RT3883_PCIMEM_BASE 0x20000000 + +#define RT3883_EHCI_BASE (RT3883_USBHOST_BASE) +#define RT3883_OHCI_BASE (RT3883_USBHOST_BASE + 0x1000) + +#define RT3883_SYSC_SIZE 0x100 +#define RT3883_TIMER_SIZE 0x100 +#define RT3883_INTC_SIZE 0x100 +#define RT3883_MEMC_SIZE 0x100 +#define RT3883_UART0_SIZE 0x100 +#define RT3883_UART1_SIZE 0x100 +#define RT3883_PIO_SIZE 0x100 +#define RT3883_FSCC_SIZE 0x100 +#define RT3883_NANDC_SIZE 0x0f0 +#define RT3883_I2C_SIZE 0x100 +#define RT3883_I2S_SIZE 0x100 +#define RT3883_SPI_SIZE 0x100 +#define RT3883_PCM_SIZE 0x800 +#define RT3883_GDMA_SIZE 0x800 +#define RT3883_CODEC1_SIZE 0x800 +#define RT3883_CODEC2_SIZE 0x800 +#define RT3883_FE_SIZE 0x10000 +#define RT3883_ROM_SIZE 0x4000 +#define RT3883_USBDEV_SIZE 0x4000 +#define RT3883_PCI_SIZE 0x40000 +#define RT3883_WLAN_SIZE 0x40000 +#define RT3883_USBHOST_SIZE 0x40000 +#define RT3883_BOOT_SIZE (32 * 1024 * 1024) +#define RT3883_SRAM_SIZE (32 * 1024 * 1024) + +/* SYSC registers */ +#define RT3883_SYSC_REG_CHIPID0_3 0x00 /* Chip ID 0 */ +#define RT3883_SYSC_REG_CHIPID4_7 0x04 /* Chip ID 1 */ +#define RT3883_SYSC_REG_REVID 0x0c /* Chip Revision Identification */ +#define RT3883_SYSC_REG_SYSCFG0 0x10 /* System Configuration 0 */ +#define RT3883_SYSC_REG_SYSCFG1 0x14 /* System Configuration 1 */ +#define RT3883_SYSC_REG_CLKCFG0 0x2c /* Clock Configuration 0 */ +#define RT3883_SYSC_REG_CLKCFG1 0x30 /* Clock Configuration 1 */ +#define RT3883_SYSC_REG_RSTCTRL 0x34 /* Reset Control*/ +#define RT3883_SYSC_REG_RSTSTAT 0x38 /* Reset Status*/ +#define RT3883_SYSC_REG_USB_PS 0x5c /* USB Power saving control */ +#define RT3883_SYSC_REG_GPIO_MODE 0x60 /* GPIO Purpose Select */ +#define RT3883_SYSC_REG_PCIE_CLK_GEN0 0x7c +#define RT3883_SYSC_REG_PCIE_CLK_GEN1 0x80 +#define RT3883_SYSC_REG_PCIE_CLK_GEN2 0x84 +#define RT3883_SYSC_REG_PMU 0x88 +#define RT3883_SYSC_REG_PMU1 0x8c + +#define RT3883_REVID_VER_ID_MASK 0x0f +#define RT3883_REVID_VER_ID_SHIFT 8 +#define RT3883_REVID_ECO_ID_MASK 0x0f + +#define RT3883_SYSCFG0_DRAM_TYPE_DDR2 BIT(17) +#define RT3883_SYSCFG0_CPUCLK_SHIFT 8 +#define RT3883_SYSCFG0_CPUCLK_MASK 0x3 +#define RT3883_SYSCFG0_CPUCLK_250 0x0 +#define RT3883_SYSCFG0_CPUCLK_384 0x1 +#define RT3883_SYSCFG0_CPUCLK_480 0x2 +#define RT3883_SYSCFG0_CPUCLK_500 0x3 + +#define RT3883_SYSCFG1_USB0_HOST_MODE BIT(10) +#define RT3883_SYSCFG1_PCIE_RC_MODE BIT(8) +#define RT3883_SYSCFG1_PCI_HOST_MODE BIT(7) +#define RT3883_SYSCFG1_PCI_66M_MODE BIT(6) +#define RT3883_SYSCFG1_GPIO2_AS_WDT_OUT BIT(2) + +#define RT3883_CLKCFG1_PCIE_CLK_EN BIT(21) +#define RT3883_CLKCFG1_UPHY1_CLK_EN BIT(20) +#define RT3883_CLKCFG1_PCI_CLK_EN BIT(19) +#define RT3883_CLKCFG1_UPHY0_CLK_EN BIT(18) + +#define RT3883_GPIO_MODE_I2C BIT(0) +#define RT3883_GPIO_MODE_SPI BIT(1) +#define RT3883_GPIO_MODE_UART0_SHIFT 2 +#define RT3883_GPIO_MODE_UART0_MASK 0x7 +#define RT3883_GPIO_MODE_UART0(x) ((x) << RT3883_GPIO_MODE_UART0_SHIFT) +#define RT3883_GPIO_MODE_UARTF 0x0 +#define RT3883_GPIO_MODE_PCM_UARTF 0x1 +#define RT3883_GPIO_MODE_PCM_I2S 0x2 +#define RT3883_GPIO_MODE_I2S_UARTF 0x3 +#define RT3883_GPIO_MODE_PCM_GPIO 0x4 +#define RT3883_GPIO_MODE_GPIO_UARTF 0x5 +#define RT3883_GPIO_MODE_GPIO_I2S 0x6 +#define RT3883_GPIO_MODE_GPIO 0x7 +#define RT3883_GPIO_MODE_UART1 BIT(5) +#define RT3883_GPIO_MODE_JTAG BIT(6) +#define RT3883_GPIO_MODE_MDIO BIT(7) +#define RT3883_GPIO_MODE_GE1 BIT(9) +#define RT3883_GPIO_MODE_GE2 BIT(10) +#define RT3883_GPIO_MODE_PCI_SHIFT 11 +#define RT3883_GPIO_MODE_PCI_MASK 0x7 +#define RT3883_GPIO_MODE_PCI(_x) ((_x) << RT3883_GPIO_MODE_PCI_SHIFT) +#define RT3883_GPIO_MODE_PCI_DEV 0 +#define RT3883_GPIO_MODE_PCI_HOST2 1 +#define RT3883_GPIO_MODE_PCI_HOST1 2 +#define RT3883_GPIO_MODE_PCI_FNC 3 +#define RT3883_GPIO_MODE_PCI_GPIO 7 +#define RT3883_GPIO_MODE_LNA_A_SHIFT 16 +#define RT3883_GPIO_MODE_LNA_A_MASK 0x3 +#define RT3883_GPIO_MODE_LNA_A(_x) ((_x) << RT3883_GPIO_MODE_LNA_A_SHIFT) +#define RT3883_GPIO_MODE_LNA_A_GPIO 0x3 +#define RT3883_GPIO_MODE_LNA_G_SHIFT 18 +#define RT3883_GPIO_MODE_LNA_G_MASK 0x3 +#define RT3883_GPIO_MODE_LNA_G(_x) ((_x) << RT3883_GPIO_MODE_LNA_G_SHIFT) +#define RT3883_GPIO_MODE_LNA_G_GPIO 0x3 + +#define RT3883_RSTCTRL_PCIE_PCI_PDM BIT(27) +#define RT3883_RSTCTRL_FLASH BIT(26) +#define RT3883_RSTCTRL_UDEV BIT(25) +#define RT3883_RSTCTRL_PCI BIT(24) +#define RT3883_RSTCTRL_PCIE BIT(23) +#define RT3883_RSTCTRL_UHST BIT(22) +#define RT3883_RSTCTRL_FE BIT(21) +#define RT3883_RSTCTRL_WLAN BIT(20) +#define RT3883_RSTCTRL_UART1 BIT(29) +#define RT3883_RSTCTRL_SPI BIT(18) +#define RT3883_RSTCTRL_I2S BIT(17) +#define RT3883_RSTCTRL_I2C BIT(16) +#define RT3883_RSTCTRL_NAND BIT(15) +#define RT3883_RSTCTRL_DMA BIT(14) +#define RT3883_RSTCTRL_PIO BIT(13) +#define RT3883_RSTCTRL_UART BIT(12) +#define RT3883_RSTCTRL_PCM BIT(11) +#define RT3883_RSTCTRL_MC BIT(10) +#define RT3883_RSTCTRL_INTC BIT(9) +#define RT3883_RSTCTRL_TIMER BIT(8) +#define RT3883_RSTCTRL_SYS BIT(0) + +#define RT3883_INTC_INT_SYSCTL BIT(0) +#define RT3883_INTC_INT_TIMER0 BIT(1) +#define RT3883_INTC_INT_TIMER1 BIT(2) +#define RT3883_INTC_INT_IA BIT(3) +#define RT3883_INTC_INT_PCM BIT(4) +#define RT3883_INTC_INT_UART0 BIT(5) +#define RT3883_INTC_INT_PIO BIT(6) +#define RT3883_INTC_INT_DMA BIT(7) +#define RT3883_INTC_INT_NAND BIT(8) +#define RT3883_INTC_INT_PERFC BIT(9) +#define RT3883_INTC_INT_I2S BIT(10) +#define RT3883_INTC_INT_UART1 BIT(12) +#define RT3883_INTC_INT_UHST BIT(18) +#define RT3883_INTC_INT_UDEV BIT(19) + +/* FLASH/SRAM/Codec Controller registers */ +#define RT3883_FSCC_REG_FLASH_CFG0 0x00 +#define RT3883_FSCC_REG_FLASH_CFG1 0x04 +#define RT3883_FSCC_REG_CODEC_CFG0 0x40 +#define RT3883_FSCC_REG_CODEC_CFG1 0x44 + +#define RT3883_FLASH_CFG_WIDTH_SHIFT 26 +#define RT3883_FLASH_CFG_WIDTH_MASK 0x3 +#define RT3883_FLASH_CFG_WIDTH_8BIT 0x0 +#define RT3883_FLASH_CFG_WIDTH_16BIT 0x1 +#define RT3883_FLASH_CFG_WIDTH_32BIT 0x2 + + +/* UART registers */ +#define RT3883_UART_REG_RX 0 +#define RT3883_UART_REG_TX 1 +#define RT3883_UART_REG_IER 2 +#define RT3883_UART_REG_IIR 3 +#define RT3883_UART_REG_FCR 4 +#define RT3883_UART_REG_LCR 5 +#define RT3883_UART_REG_MCR 6 +#define RT3883_UART_REG_LSR 7 + +#endif /* _RT3883_REGS_H_ */ diff --git a/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/war.h b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/war.h new file mode 100644 index 0000000000..a7b712cf2d --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/include/asm/mach-ralink/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MACH_RALINK_WAR_H +#define __ASM_MACH_RALINK_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MACH_RALINK_WAR_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/pci/pci-rt288x.c b/target/linux/ramips/files-3.7/arch/mips/pci/pci-rt288x.c new file mode 100644 index 0000000000..f67902272c --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/pci/pci-rt288x.c @@ -0,0 +1,250 @@ +/* + * Ralink RT288x SoC PCI register definitions + * + * Copyright (C) 2009 John Crispin <blogic@openwrt.org> + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/io.h> +#include <linux/init.h> + +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> + +#define RT2880_PCI_MEM_BASE 0x20000000 +#define RT2880_PCI_MEM_SIZE 0x10000000 +#define RT2880_PCI_IO_BASE 0x00460000 +#define RT2880_PCI_IO_SIZE 0x00010000 + +#define RT2880_PCI_REG_PCICFG_ADDR 0x00 +#define RT2880_PCI_REG_PCIMSK_ADDR 0x0c +#define RT2880_PCI_REG_BAR0SETUP_ADDR 0x10 +#define RT2880_PCI_REG_IMBASEBAR0_ADDR 0x18 +#define RT2880_PCI_REG_CONFIG_ADDR 0x20 +#define RT2880_PCI_REG_CONFIG_DATA 0x24 +#define RT2880_PCI_REG_MEMBASE 0x28 +#define RT2880_PCI_REG_IOBASE 0x2c +#define RT2880_PCI_REG_ID 0x30 +#define RT2880_PCI_REG_CLASS 0x34 +#define RT2880_PCI_REG_SUBID 0x38 +#define RT2880_PCI_REG_ARBCTL 0x80 + +static void __iomem *rt2880_pci_base; +static DEFINE_SPINLOCK(rt2880_pci_lock); + +static u32 rt2880_pci_reg_read(u32 reg) +{ + return readl(rt2880_pci_base + reg); +} + +static void rt2880_pci_reg_write(u32 val, u32 reg) +{ + writel(val, rt2880_pci_base + reg); +} + +static inline u32 rt2880_pci_get_cfgaddr(unsigned int bus, unsigned int slot, + unsigned int func, unsigned int where) +{ + return ((bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | + 0x80000000); +} + +static int rt2880_pci_config_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + unsigned long flags; + u32 address; + u32 data; + + address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn), + PCI_FUNC(devfn), where); + + spin_lock_irqsave(&rt2880_pci_lock, flags); + rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR); + data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA); + spin_unlock_irqrestore(&rt2880_pci_lock, flags); + + switch (size) { + case 1: + *val = (data >> ((where & 3) << 3)) & 0xff; + break; + case 2: + *val = (data >> ((where & 3) << 3)) & 0xffff; + break; + case 4: + *val = data; + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static int rt2880_pci_config_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + unsigned long flags; + u32 address; + u32 data; + + address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn), + PCI_FUNC(devfn), where); + + spin_lock_irqsave(&rt2880_pci_lock, flags); + rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR); + data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA); + + switch (size) { + case 1: + data = (data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + break; + case 2: + data = (data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + break; + case 4: + data = val; + break; + } + + rt2880_pci_reg_write(data, RT2880_PCI_REG_CONFIG_DATA); + spin_unlock_irqrestore(&rt2880_pci_lock, flags); + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops rt2880_pci_ops = { + .read = rt2880_pci_config_read, + .write = rt2880_pci_config_write, +}; + +static struct resource rt2880_pci_mem_resource = { + .name = "PCI MEM space", + .start = RT2880_PCI_MEM_BASE, + .end = RT2880_PCI_MEM_BASE + RT2880_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct resource rt2880_pci_io_resource = { + .name = "PCI IO space", + .start = RT2880_PCI_IO_BASE, + .end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO, +}; + +static struct pci_controller rt2880_pci_controller = { + .pci_ops = &rt2880_pci_ops, + .mem_resource = &rt2880_pci_mem_resource, + .io_resource = &rt2880_pci_io_resource, +}; + +static inline u32 rt2880_pci_read_u32(unsigned long reg) +{ + unsigned long flags; + u32 address; + u32 ret; + + address = rt2880_pci_get_cfgaddr(0, 0, 0, reg); + + spin_lock_irqsave(&rt2880_pci_lock, flags); + rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR); + ret = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA); + spin_unlock_irqrestore(&rt2880_pci_lock, flags); + + return ret; +} + +static inline void rt2880_pci_write_u32(unsigned long reg, u32 val) +{ + unsigned long flags; + u32 address; + + address = rt2880_pci_get_cfgaddr(0, 0, 0, reg); + + spin_lock_irqsave(&rt2880_pci_lock, flags); + rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR); + rt2880_pci_reg_write(val, RT2880_PCI_REG_CONFIG_DATA); + spin_unlock_irqrestore(&rt2880_pci_lock, flags); +} + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + u16 cmd; + int irq = -1; + + if (dev->bus->number != 0) + return irq; + + switch (PCI_SLOT(dev->devfn)) { + case 0x00: + rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000); + (void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0); + break; + case 0x11: + irq = RT288X_CPU_IRQ_PCI; + break; + default: + printk("%s:%s[%d] trying to alloc unknown pci irq\n", + __FILE__, __func__, __LINE__); + BUG(); + break; + } + + pci_write_config_byte((struct pci_dev*)dev, PCI_CACHE_LINE_SIZE, 0x14); + pci_write_config_byte((struct pci_dev*)dev, PCI_LATENCY_TIMER, 0xFF); + pci_read_config_word((struct pci_dev*)dev, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | + PCI_COMMAND_INVALIDATE | PCI_COMMAND_FAST_BACK | + PCI_COMMAND_SERR | PCI_COMMAND_WAIT | PCI_COMMAND_PARITY; + pci_write_config_word((struct pci_dev*)dev, PCI_COMMAND, cmd); + pci_write_config_byte((struct pci_dev*)dev, PCI_INTERRUPT_LINE, + dev->irq); + return irq; +} + +int __init rt288x_register_pci(void) +{ + void __iomem *io_map_base; + int i; + + rt2880_pci_base = ioremap_nocache(RT2880_PCI_BASE, PAGE_SIZE); + + io_map_base = ioremap(RT2880_PCI_IO_BASE, RT2880_PCI_IO_SIZE); + rt2880_pci_controller.io_map_base = (unsigned long) io_map_base; + set_io_port_base((unsigned long) io_map_base); + + ioport_resource.start = RT2880_PCI_IO_BASE; + ioport_resource.end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1; + + rt2880_pci_reg_write(0, RT2880_PCI_REG_PCICFG_ADDR); + for(i = 0; i < 0xfffff; i++) {} + + rt2880_pci_reg_write(0x79, RT2880_PCI_REG_ARBCTL); + rt2880_pci_reg_write(0x07FF0001, RT2880_PCI_REG_BAR0SETUP_ADDR); + rt2880_pci_reg_write(RT2880_PCI_MEM_BASE, RT2880_PCI_REG_MEMBASE); + rt2880_pci_reg_write(RT2880_PCI_IO_BASE, RT2880_PCI_REG_IOBASE); + rt2880_pci_reg_write(0x08000000, RT2880_PCI_REG_IMBASEBAR0_ADDR); + rt2880_pci_reg_write(0x08021814, RT2880_PCI_REG_ID); + rt2880_pci_reg_write(0x00800001, RT2880_PCI_REG_CLASS); + rt2880_pci_reg_write(0x28801814, RT2880_PCI_REG_SUBID); + rt2880_pci_reg_write(0x000c0000, RT2880_PCI_REG_PCIMSK_ADDR); + + rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000); + (void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0); + + register_pci_controller(&rt2880_pci_controller); + return 0; +} + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} diff --git a/target/linux/ramips/files-3.7/arch/mips/pci/pci-rt3883.c b/target/linux/ramips/files-3.7/arch/mips/pci/pci-rt3883.c new file mode 100644 index 0000000000..8a4c8ce61a --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/pci/pci-rt3883.c @@ -0,0 +1,487 @@ +/* + * Ralink RT3883 SoC PCI support + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/io.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/interrupt.h> + +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_regs.h> + +#define RT3883_MEMORY_BASE 0x00000000 +#define RT3883_MEMORY_SIZE 0x02000000 + +#define RT3883_PCI_MEM_BASE 0x20000000 +#define RT3883_PCI_MEM_SIZE 0x10000000 +#define RT3883_PCI_IO_BASE 0x10160000 +#define RT3883_PCI_IO_SIZE 0x00010000 + +#define RT3883_PCI_REG_PCICFG_ADDR 0x00 +#define RT3883_PCI_REG_PCIRAW_ADDR 0x04 +#define RT3883_PCI_REG_PCIINT_ADDR 0x08 +#define RT3883_PCI_REG_PCIMSK_ADDR 0x0c +#define RT3833_PCI_PCIINT_PCIE BIT(20) +#define RT3833_PCI_PCIINT_PCI1 BIT(19) +#define RT3833_PCI_PCIINT_PCI0 BIT(18) + +#define RT3883_PCI_REG_CONFIG_ADDR 0x20 +#define RT3883_PCI_REG_CONFIG_DATA 0x24 +#define RT3883_PCI_REG_MEMBASE 0x28 +#define RT3883_PCI_REG_IOBASE 0x2c +#define RT3883_PCI_REG_ARBCTL 0x80 + +#define RT3883_PCI_REG_BASE(_x) (0x1000 + (_x) * 0x1000) +#define RT3883_PCI_REG_BAR0SETUP_ADDR(_x) (RT3883_PCI_REG_BASE((_x)) + 0x10) +#define RT3883_PCI_REG_IMBASEBAR0_ADDR(_x) (RT3883_PCI_REG_BASE((_x)) + 0x18) +#define RT3883_PCI_REG_ID(_x) (RT3883_PCI_REG_BASE((_x)) + 0x30) +#define RT3883_PCI_REG_CLASS(_x) (RT3883_PCI_REG_BASE((_x)) + 0x34) +#define RT3883_PCI_REG_SUBID(_x) (RT3883_PCI_REG_BASE((_x)) + 0x38) +#define RT3883_PCI_REG_STATUS(_x) (RT3883_PCI_REG_BASE((_x)) + 0x50) + +static int (*rt3883_pci_plat_dev_init)(struct pci_dev *dev); +static void __iomem *rt3883_pci_base; +static DEFINE_SPINLOCK(rt3883_pci_lock); + +static inline u32 rt3883_pci_rr(unsigned reg) +{ + return readl(rt3883_pci_base + reg); +} + +static inline void rt3883_pci_wr(u32 val, unsigned reg) +{ + writel(val, rt3883_pci_base + reg); +} + +static inline u32 rt3883_pci_get_cfgaddr(unsigned int bus, unsigned int slot, + unsigned int func, unsigned int where) +{ + return ((bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | + 0x80000000); +} + +static u32 rt3883_pci_read_u32(unsigned bus, unsigned slot, + unsigned func, unsigned reg) +{ + unsigned long flags; + u32 address; + u32 ret; + + address = rt3883_pci_get_cfgaddr(bus, slot, func, reg); + + spin_lock_irqsave(&rt3883_pci_lock, flags); + rt3883_pci_wr(address, RT3883_PCI_REG_CONFIG_ADDR); + ret = rt3883_pci_rr(RT3883_PCI_REG_CONFIG_DATA); + spin_unlock_irqrestore(&rt3883_pci_lock, flags); + + return ret; +} + +static void rt3883_pci_write_u32(unsigned bus, unsigned slot, + unsigned func, unsigned reg, u32 val) +{ + unsigned long flags; + u32 address; + + address = rt3883_pci_get_cfgaddr(bus, slot, func, reg); + + spin_lock_irqsave(&rt3883_pci_lock, flags); + rt3883_pci_wr(address, RT3883_PCI_REG_CONFIG_ADDR); + rt3883_pci_wr(val, RT3883_PCI_REG_CONFIG_DATA); + spin_unlock_irqrestore(&rt3883_pci_lock, flags); +} + +static void rt3883_pci_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + u32 pending; + + pending = rt3883_pci_rr(RT3883_PCI_REG_PCIINT_ADDR) & + rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR); + + if (!pending) { + spurious_interrupt(); + return; + } + + if (pending & RT3833_PCI_PCIINT_PCI0) + generic_handle_irq(RT3883_PCI_IRQ_PCI0); + + if (pending & RT3833_PCI_PCIINT_PCI1) + generic_handle_irq(RT3883_PCI_IRQ_PCI1); + + if (pending & RT3833_PCI_PCIINT_PCIE) + generic_handle_irq(RT3883_PCI_IRQ_PCIE); +} + +static void rt3883_pci_irq_unmask(struct irq_data *d) +{ + int irq = d->irq; + u32 mask; + u32 t; + + switch (irq) { + case RT3883_PCI_IRQ_PCI0: + mask = RT3833_PCI_PCIINT_PCI0; + break; + case RT3883_PCI_IRQ_PCI1: + mask = RT3833_PCI_PCIINT_PCI1; + break; + case RT3883_PCI_IRQ_PCIE: + mask = RT3833_PCI_PCIINT_PCIE; + break; + default: + BUG(); + } + + t = rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR); + rt3883_pci_wr(t | mask, RT3883_PCI_REG_PCIMSK_ADDR); + /* flush write */ + rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR); +} + +static void rt3883_pci_irq_mask(struct irq_data *d) +{ + int irq = d->irq; + u32 mask; + u32 t; + + switch (irq) { + case RT3883_PCI_IRQ_PCI0: + mask = RT3833_PCI_PCIINT_PCI0; + break; + case RT3883_PCI_IRQ_PCI1: + mask = RT3833_PCI_PCIINT_PCI1; + break; + case RT3883_PCI_IRQ_PCIE: + mask = RT3833_PCI_PCIINT_PCIE; + break; + default: + BUG(); + } + + t = rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR); + rt3883_pci_wr(t & ~mask, RT3883_PCI_REG_PCIMSK_ADDR); + /* flush write */ + rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR); +} + +static struct irq_chip rt3883_pci_irq_chip = { + .name = "RT3883 PCI", + .irq_mask = rt3883_pci_irq_mask, + .irq_unmask = rt3883_pci_irq_unmask, + .irq_mask_ack = rt3883_pci_irq_mask, +}; + +static void __init rt3883_pci_irq_init(void) +{ + int i; + + /* disable all interrupts */ + rt3883_pci_wr(0, RT3883_PCI_REG_PCIMSK_ADDR); + + for (i = RT3883_PCI_IRQ_BASE; + i < RT3883_PCI_IRQ_BASE + RT3883_PCI_IRQ_COUNT; i++) { + irq_set_chip_and_handler(i, &rt3883_pci_irq_chip, + handle_level_irq); + } + + irq_set_chained_handler(RT3883_CPU_IRQ_PCI, rt3883_pci_irq_handler); +} + +static int rt3883_pci_config_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + unsigned long flags; + u32 address; + u32 data; + + address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn), + PCI_FUNC(devfn), where); + + spin_lock_irqsave(&rt3883_pci_lock, flags); + rt3883_pci_wr(address, RT3883_PCI_REG_CONFIG_ADDR); + data = rt3883_pci_rr(RT3883_PCI_REG_CONFIG_DATA); + spin_unlock_irqrestore(&rt3883_pci_lock, flags); + + switch (size) { + case 1: + *val = (data >> ((where & 3) << 3)) & 0xff; + break; + case 2: + *val = (data >> ((where & 3) << 3)) & 0xffff; + break; + case 4: + *val = data; + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static int rt3883_pci_config_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + unsigned long flags; + u32 address; + u32 data; + + address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn), + PCI_FUNC(devfn), where); + + spin_lock_irqsave(&rt3883_pci_lock, flags); + rt3883_pci_wr(address, RT3883_PCI_REG_CONFIG_ADDR); + data = rt3883_pci_rr(RT3883_PCI_REG_CONFIG_DATA); + + switch (size) { + case 1: + data = (data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + break; + case 2: + data = (data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + break; + case 4: + data = val; + break; + } + + rt3883_pci_wr(data, RT3883_PCI_REG_CONFIG_DATA); + spin_unlock_irqrestore(&rt3883_pci_lock, flags); + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops rt3883_pci_ops = { + .read = rt3883_pci_config_read, + .write = rt3883_pci_config_write, +}; + +static struct resource rt3883_pci_mem_resource = { + .name = "PCI MEM space", + .start = RT3883_PCI_MEM_BASE, + .end = RT3883_PCI_MEM_BASE + RT3883_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct resource rt3883_pci_io_resource = { + .name = "PCI IO space", + .start = RT3883_PCI_IO_BASE, + .end = RT3883_PCI_IO_BASE + RT3883_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO, +}; + +static struct pci_controller rt3883_pci_controller = { + .pci_ops = &rt3883_pci_ops, + .mem_resource = &rt3883_pci_mem_resource, + .io_resource = &rt3883_pci_io_resource, +}; + +static void rt3883_pci_preinit(unsigned mode) +{ + u32 syscfg1; + u32 rstctrl; + u32 clkcfg1; + + if (mode & RT3883_PCI_MODE_PCIE) { + u32 val; + + val = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG1); + val &= ~(0x30); + val |= (2 << 4); + rt3883_sysc_wr(val, RT3883_SYSC_REG_SYSCFG1); + + val = rt3883_sysc_rr(RT3883_SYSC_REG_PCIE_CLK_GEN0); + val &= ~BIT(31); + rt3883_sysc_wr(val, RT3883_SYSC_REG_PCIE_CLK_GEN0); + + val = rt3883_sysc_rr(RT3883_SYSC_REG_PCIE_CLK_GEN1); + val &= 0x80ffffff; + rt3883_sysc_wr(val, RT3883_SYSC_REG_PCIE_CLK_GEN1); + + val = rt3883_sysc_rr(RT3883_SYSC_REG_PCIE_CLK_GEN1); + val |= 0xa << 24; + rt3883_sysc_wr(val, RT3883_SYSC_REG_PCIE_CLK_GEN1); + + val = rt3883_sysc_rr(RT3883_SYSC_REG_PCIE_CLK_GEN0); + val |= BIT(31); + rt3883_sysc_wr(val, RT3883_SYSC_REG_PCIE_CLK_GEN0); + + msleep(50); + } + + syscfg1 = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG1); + syscfg1 &= ~(RT3883_SYSCFG1_PCIE_RC_MODE | + RT3883_SYSCFG1_PCI_HOST_MODE); + + rstctrl = rt3883_sysc_rr(RT3883_SYSC_REG_RSTCTRL); + rstctrl |= (RT3883_RSTCTRL_PCI | RT3883_RSTCTRL_PCIE); + + clkcfg1 = rt3883_sysc_rr(RT3883_SYSC_REG_CLKCFG1); + clkcfg1 &= ~(RT3883_CLKCFG1_PCI_CLK_EN | + RT3883_CLKCFG1_PCIE_CLK_EN); + + if (mode & RT3883_PCI_MODE_PCI) { + syscfg1 |= RT3883_SYSCFG1_PCI_HOST_MODE; + clkcfg1 |= RT3883_CLKCFG1_PCI_CLK_EN; + rstctrl &= ~RT3883_RSTCTRL_PCI; + } + if (mode & RT3883_PCI_MODE_PCIE) { + syscfg1 |= RT3883_SYSCFG1_PCI_HOST_MODE | + RT3883_SYSCFG1_PCIE_RC_MODE; + clkcfg1 |= RT3883_CLKCFG1_PCIE_CLK_EN; + rstctrl &= ~RT3883_RSTCTRL_PCIE; + } + + rt3883_sysc_wr(syscfg1, RT3883_SYSC_REG_SYSCFG1); + rt3883_sysc_wr(rstctrl, RT3883_SYSC_REG_RSTCTRL); + rt3883_sysc_wr(clkcfg1, RT3883_SYSC_REG_CLKCFG1); + + msleep(500); +} + +static int rt3883_pcie_ready(void) +{ + u32 status; + + msleep(500); + + status = rt3883_pci_rr(RT3883_PCI_REG_STATUS(1)); + if (status & BIT(0)) + return 0; + + /* TODO: reset PCIe and turn off PCIe clock */ + + return -ENODEV; +} + +void __init rt3883_pci_init(unsigned mode) +{ + u32 val; + int err; + + rt3883_pci_preinit(mode); + + rt3883_pci_base = ioremap(RT3883_PCI_BASE, PAGE_SIZE); + if (rt3883_pci_base == NULL) { + pr_err("failed to ioremap PCI registers\n"); + return; + } + + rt3883_pci_wr(0, RT3883_PCI_REG_PCICFG_ADDR); + if (mode & RT3883_PCI_MODE_PCI) + rt3883_pci_wr(BIT(16), RT3883_PCI_REG_PCICFG_ADDR); + + msleep(500); + + if (mode & RT3883_PCI_MODE_PCIE) { + err = rt3883_pcie_ready(); + if (err) + return; + } + + if (mode & RT3883_PCI_MODE_PCI) + rt3883_pci_wr(0x79, RT3883_PCI_REG_ARBCTL); + + rt3883_pci_wr(RT3883_PCI_MEM_BASE, RT3883_PCI_REG_MEMBASE); + rt3883_pci_wr(RT3883_PCI_IO_BASE, RT3883_PCI_REG_IOBASE); + + /* PCI */ + rt3883_pci_wr(0x03ff0000, RT3883_PCI_REG_BAR0SETUP_ADDR(0)); + rt3883_pci_wr(RT3883_MEMORY_BASE, RT3883_PCI_REG_IMBASEBAR0_ADDR(0)); + rt3883_pci_wr(0x08021814, RT3883_PCI_REG_ID(0)); + rt3883_pci_wr(0x00800001, RT3883_PCI_REG_CLASS(0)); + rt3883_pci_wr(0x28801814, RT3883_PCI_REG_SUBID(0)); + + /* PCIe */ + rt3883_pci_wr(0x01ff0000, RT3883_PCI_REG_BAR0SETUP_ADDR(1)); + rt3883_pci_wr(RT3883_MEMORY_BASE, RT3883_PCI_REG_IMBASEBAR0_ADDR(1)); + rt3883_pci_wr(0x08021814, RT3883_PCI_REG_ID(1)); + rt3883_pci_wr(0x06040001, RT3883_PCI_REG_CLASS(1)); + rt3883_pci_wr(0x28801814, RT3883_PCI_REG_SUBID(1)); + + rt3883_pci_irq_init(); + + /* PCIe */ + val = rt3883_pci_read_u32(0, 0x01, 0, PCI_COMMAND); + val |= 0x7; + rt3883_pci_write_u32(0, 0x01, 0, PCI_COMMAND, val); + + /* PCI */ + val = rt3883_pci_read_u32(0, 0x00, 0, PCI_COMMAND); + val |= 0x7; + rt3883_pci_write_u32(0, 0x00, 0, PCI_COMMAND, val); + + ioport_resource.start = rt3883_pci_io_resource.start; + ioport_resource.end = rt3883_pci_io_resource.end; + + register_pci_controller(&rt3883_pci_controller); +} + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq = -1; + + switch (dev->bus->number) { + case 0: + switch (PCI_SLOT(dev->devfn)) { + case 0x00: + rt3883_pci_wr(0x03ff0001, + RT3883_PCI_REG_BAR0SETUP_ADDR(0)); + rt3883_pci_wr(0x03ff0001, + RT3883_PCI_REG_BAR0SETUP_ADDR(1)); + + rt3883_pci_write_u32(0, 0x00, 0, PCI_BASE_ADDRESS_0, + RT3883_MEMORY_BASE); + rt3883_pci_read_u32(0, 0x00, 0, PCI_BASE_ADDRESS_0); + + irq = RT3883_CPU_IRQ_PCI; + break; + case 0x01: + rt3883_pci_write_u32(0, 0x01, 0, PCI_IO_BASE, + 0x00000101); + break; + case 0x11: + irq = RT3883_PCI_IRQ_PCI0; + break; + case 0x12: + irq = RT3883_PCI_IRQ_PCI1; + break; + } + break; + + case 1: + irq = RT3883_PCI_IRQ_PCIE; + break; + + default: + dev_err(&dev->dev, "no IRQ specified\n"); + return irq; + } + + return irq; +} + +void __init rt3883_pci_set_plat_dev_init(int (*f)(struct pci_dev *dev)) +{ + rt3883_pci_plat_dev_init = f; +} + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + if (rt3883_pci_plat_dev_init) + return rt3883_pci_plat_dev_init(dev); + + return 0; +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/Kconfig b/target/linux/ramips/files-3.7/arch/mips/ralink/Kconfig new file mode 100644 index 0000000000..74bca6d0e9 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/Kconfig @@ -0,0 +1,83 @@ +if MIPS_RALINK + +choice + prompt "Ralink SoC selection" + default SOC_RT288X + help + Select Ralink MIPS SoC type. + + config RALINK_RT288X + bool "RT288x" + select SOC_RT288X + + config RALINK_RT305X + bool "RT305x" + select SOC_RT305X + + config RALINK_RT3883 + bool "RT3883" + select SOC_RT3883 + +endchoice + +source "arch/mips/ralink/rt288x/Kconfig" +source "arch/mips/ralink/rt305x/Kconfig" +source "arch/mips/ralink/rt3883/Kconfig" + +config SOC_RT288X + bool + select CEVT_R4K + select CSRC_R4K + select DMA_NONCOHERENT + select IRQ_CPU + select ARCH_REQUIRE_GPIOLIB + select SYS_HAS_CPU_MIPS32_R1 + select SYS_HAS_CPU_MIPS32_R2 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK + select MIPS_MACHINE + select HAVE_CLK + +config SOC_RT305X + bool + select CEVT_R4K + select CSRC_R4K + select DMA_NONCOHERENT + select IRQ_CPU + select ARCH_REQUIRE_GPIOLIB + select SYS_HAS_CPU_MIPS32_R1 + select SYS_HAS_CPU_MIPS32_R2 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK + select MIPS_MACHINE + select USB_ARCH_HAS_HCD + select USB_ARCH_HAS_OHCI + select USB_ARCH_HAS_EHCI + select HAVE_CLK + +config SOC_RT3883 + bool + select CEVT_R4K + select CSRC_R4K + select DMA_NONCOHERENT + select IRQ_CPU + select ARCH_REQUIRE_GPIOLIB + select SYS_HAS_CPU_MIPS32_R1 + select SYS_HAS_CPU_MIPS32_R2 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK + select MIPS_MACHINE + select USB_ARCH_HAS_OHCI + select USB_ARCH_HAS_EHCI + select HAVE_CLK + +config RALINK_DEV_GPIO_BUTTONS + def_bool n + +config RALINK_DEV_GPIO_LEDS + def_bool n + +endif diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/Platform b/target/linux/ramips/files-3.7/arch/mips/ralink/Platform new file mode 100644 index 0000000000..1b540492c2 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/Platform @@ -0,0 +1,26 @@ +# +# Ralink SoC common stuff +# +core-$(CONFIG_MIPS_RALINK) += arch/mips/ralink/common/ +cflags-$(CONFIG_MIPS_RALINK) += -I$(srctree)/arch/mips/include/asm/mach-ralink + +# +# Ralink RT288x +# +core-$(CONFIG_RALINK_RT288X) += arch/mips/ralink/rt288x/ +cflags-$(CONFIG_RALINK_RT288X) += -I$(srctree)//arch/mips/include/asm/mach-ralink/rt288x +load-$(CONFIG_RALINK_RT288X) += 0xffffffff88000000 + +# +# Ralink RT305x +# +core-$(CONFIG_RALINK_RT305X) += arch/mips/ralink/rt305x/ +cflags-$(CONFIG_RALINK_RT305X) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt305x +load-$(CONFIG_RALINK_RT305X) += 0xffffffff80000000 + +# +# Ralink RT3883 +# +core-$(CONFIG_RALINK_RT3883) += arch/mips/ralink/rt3883/ +cflags-$(CONFIG_RALINK_RT3883) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt3883 +load-$(CONFIG_RALINK_RT3883) += 0xffffffff80000000 diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/common/Makefile b/target/linux/ramips/files-3.7/arch/mips/ralink/common/Makefile new file mode 100644 index 0000000000..adab85f689 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/common/Makefile @@ -0,0 +1,13 @@ +# +# Makefile for the Ralink common stuff +# +# Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License version 2 as published +# by the Free Software Foundation. + +obj-y := prom.o setup.o intc.o gpio.o + +obj-$(CONFIG_RALINK_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o +obj-$(CONFIG_RALINK_DEV_GPIO_LEDS) += dev-gpio-leds.o diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/common/dev-gpio-buttons.c b/target/linux/ramips/files-3.7/arch/mips/ralink/common/dev-gpio-buttons.c new file mode 100644 index 0000000000..75a2a17143 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/common/dev-gpio-buttons.c @@ -0,0 +1,57 @@ +/* + * Ralink SoC GPIO button support + * + * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "linux/init.h" +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include <asm/mach-ralink/dev-gpio-buttons.h> + +void __init ramips_register_gpio_buttons(int id, + unsigned poll_interval, + unsigned nbuttons, + struct gpio_keys_button *buttons) +{ + struct platform_device *pdev; + struct gpio_keys_platform_data pdata; + struct gpio_keys_button *p; + int err; + + p = kmalloc(nbuttons * sizeof(*p), GFP_KERNEL); + if (!p) + return; + + memcpy(p, buttons, nbuttons * sizeof(*p)); + + pdev = platform_device_alloc("gpio-keys-polled", id); + if (!pdev) + goto err_free_buttons; + + memset(&pdata, 0, sizeof(pdata)); + pdata.poll_interval = poll_interval; + pdata.nbuttons = nbuttons; + pdata.buttons = p; + + err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); + if (err) + goto err_put_pdev; + + err = platform_device_add(pdev); + if (err) + goto err_put_pdev; + + return; + +err_put_pdev: + platform_device_put(pdev); + +err_free_buttons: + kfree(p); +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/common/dev-gpio-leds.c b/target/linux/ramips/files-3.7/arch/mips/ralink/common/dev-gpio-leds.c new file mode 100644 index 0000000000..a45a7cb779 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/common/dev-gpio-leds.c @@ -0,0 +1,54 @@ +/* + * Ralink SoC GPIO LED device support + * + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include <asm/mach-ralink/dev-gpio-leds.h> + +void __init ramips_register_gpio_leds(int id, unsigned num_leds, + struct gpio_led *leds) +{ + struct platform_device *pdev; + struct gpio_led_platform_data pdata; + struct gpio_led *p; + int err; + + p = kmalloc(num_leds * sizeof(*p), GFP_KERNEL); + if (!p) + return; + + memcpy(p, leds, num_leds * sizeof(*p)); + + pdev = platform_device_alloc("leds-gpio", id); + if (!pdev) + goto err_free_leds; + + memset(&pdata, 0, sizeof(pdata)); + pdata.num_leds = num_leds; + pdata.leds = p; + + err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); + if (err) + goto err_put_pdev; + + err = platform_device_add(pdev); + if (err) + goto err_put_pdev; + + return; + +err_put_pdev: + platform_device_put(pdev); + +err_free_leds: + kfree(p); +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/common/gpio.c b/target/linux/ramips/files-3.7/arch/mips/ralink/common/gpio.c new file mode 100644 index 0000000000..f03d145b6d --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/common/gpio.c @@ -0,0 +1,113 @@ +/* + * Ralink SoC specific GPIO support + * + * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/io.h> + +#include <asm/mach-ralink/ramips_gpio.h> + +static inline struct ramips_gpio_chip *to_ramips_gpio(struct gpio_chip *chip) +{ + struct ramips_gpio_chip *rg; + + rg = container_of(chip, struct ramips_gpio_chip, chip); + return rg; +} + +static inline void ramips_gpio_wr(struct ramips_gpio_chip *rg, u8 reg, u32 val) +{ + __raw_writel(val, rg->regs_base + rg->regs[reg]); +} + +static inline u32 ramips_gpio_rr(struct ramips_gpio_chip *rg, u8 reg) +{ + return __raw_readl(rg->regs_base + rg->regs[reg]); +} + +static int ramips_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct ramips_gpio_chip *rg = to_ramips_gpio(chip); + unsigned long flags; + u32 t; + + spin_lock_irqsave(&rg->lock, flags); + t = ramips_gpio_rr(rg, RAMIPS_GPIO_REG_DIR); + t &= ~(1 << offset); + ramips_gpio_wr(rg, RAMIPS_GPIO_REG_DIR, t); + spin_unlock_irqrestore(&rg->lock, flags); + + return 0; +} + +static int ramips_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct ramips_gpio_chip *rg = to_ramips_gpio(chip); + unsigned long flags; + u32 reg; + u32 t; + + reg = (value) ? RAMIPS_GPIO_REG_SET : RAMIPS_GPIO_REG_RESET; + + spin_lock_irqsave(&rg->lock, flags); + ramips_gpio_wr(rg, reg, 1 << offset); + + t = ramips_gpio_rr(rg, RAMIPS_GPIO_REG_DIR); + t |= 1 << offset; + ramips_gpio_wr(rg, RAMIPS_GPIO_REG_DIR, t); + spin_unlock_irqrestore(&rg->lock, flags); + + return 0; +} + +static void ramips_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct ramips_gpio_chip *rg = to_ramips_gpio(chip); + u32 reg; + + reg = (value) ? RAMIPS_GPIO_REG_SET : RAMIPS_GPIO_REG_RESET; + ramips_gpio_wr(rg, reg, 1 << offset); +} + +static int ramips_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct ramips_gpio_chip *rg = to_ramips_gpio(chip); + u32 t; + + t = ramips_gpio_rr(rg, RAMIPS_GPIO_REG_DATA); + return !!(t & (1 << offset)); +} + +static __init void ramips_gpio_chip_add(struct ramips_gpio_chip *rg) +{ + spin_lock_init(&rg->lock); + + rg->regs_base = ioremap(rg->map_base, rg->map_size); + + rg->chip.direction_input = ramips_gpio_direction_input; + rg->chip.direction_output = ramips_gpio_direction_output; + rg->chip.get = ramips_gpio_get; + rg->chip.set = ramips_gpio_set; + + /* set polarity to low for all lines */ + ramips_gpio_wr(rg, RAMIPS_GPIO_REG_POL, 0); + + gpiochip_add(&rg->chip); +} + +__init int ramips_gpio_init(struct ramips_gpio_data *data) +{ + int i; + + for (i = 0; i < data->num_chips; i++) + ramips_gpio_chip_add(&data->chips[i]); + + return 0; +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/common/intc.c b/target/linux/ramips/files-3.7/arch/mips/ralink/common/intc.c new file mode 100644 index 0000000000..65e42b423b --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/common/intc.c @@ -0,0 +1,99 @@ +/* + * Ralink SoC Interrupt controller routines + * + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/bitops.h> + +#include <asm/irq_cpu.h> +#include <asm/mipsregs.h> + +#include <asm/mach-ralink/common.h> + +/* INTC register offsets */ +#define INTC_REG_STATUS0 0x00 +#define INTC_REG_STATUS1 0x04 +#define INTC_REG_TYPE 0x20 +#define INTC_REG_RAW_STATUS 0x30 +#define INTC_REG_ENABLE 0x34 +#define INTC_REG_DISABLE 0x38 + +#define INTC_INT_GLOBAL BIT(31) +#define INTC_IRQ_COUNT 32 + +static unsigned int ramips_intc_irq_base; +static void __iomem *ramips_intc_base; + +static inline void ramips_intc_wr(u32 val, unsigned reg) +{ + __raw_writel(val, ramips_intc_base + reg); +} + +static inline u32 ramips_intc_rr(unsigned reg) +{ + return __raw_readl(ramips_intc_base + reg); +} + +static void ramips_intc_irq_unmask(struct irq_data *d) +{ + unsigned int irq = d->irq - ramips_intc_irq_base; + + ramips_intc_wr((1 << irq), INTC_REG_ENABLE); +} + +static void ramips_intc_irq_mask(struct irq_data *d) +{ + unsigned int irq = d->irq - ramips_intc_irq_base; + + ramips_intc_wr((1 << irq), INTC_REG_DISABLE); +} + +static struct irq_chip ramips_intc_irq_chip = { + .name = "INTC", + .irq_unmask = ramips_intc_irq_unmask, + .irq_mask = ramips_intc_irq_mask, + .irq_mask_ack = ramips_intc_irq_mask, +}; + +static struct irqaction ramips_intc_irqaction = { + .handler = no_action, + .name = "cascade [INTC]", +}; + +void __init ramips_intc_irq_init(unsigned intc_base, unsigned irq, + unsigned irq_base) +{ + int i; + + ramips_intc_base = ioremap_nocache(intc_base, PAGE_SIZE); + ramips_intc_irq_base = irq_base; + + /* disable all interrupts */ + ramips_intc_wr(~0, INTC_REG_DISABLE); + + /* route all INTC interrupts to MIPS HW0 interrupt */ + ramips_intc_wr(0, INTC_REG_TYPE); + + for (i = ramips_intc_irq_base; + i < ramips_intc_irq_base + INTC_IRQ_COUNT; i++) + irq_set_chip_and_handler(i, &ramips_intc_irq_chip, + handle_level_irq); + + setup_irq(irq, &ramips_intc_irqaction); + ramips_intc_wr(INTC_INT_GLOBAL, INTC_REG_ENABLE); +} + +u32 ramips_intc_get_status(void) +{ + return ramips_intc_rr(INTC_REG_STATUS0); +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/common/prom.c b/target/linux/ramips/files-3.7/arch/mips/ralink/common/prom.c new file mode 100644 index 0000000000..26169d366d --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/common/prom.c @@ -0,0 +1,168 @@ +/* + * Ralink SoC specific prom routines + * + * Copyright (C) 2010 Joonas Lahtinen <joonas.lahtinen@gmail.com> + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/string.h> + +#include <asm/bootinfo.h> +#include <asm/addrspace.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/machine.h> + +unsigned long ramips_mem_base; +unsigned long ramips_mem_size_min; +unsigned long ramips_mem_size_max; + +static inline void *to_ram_addr(void *addr) +{ + u32 base; + + base = KSEG0ADDR(ramips_mem_base); + if (((u32) addr > base) && + ((u32) addr < (base + ramips_mem_size_max))) + return addr; + + base = KSEG1ADDR(ramips_mem_base); + if (((u32) addr > base) && + ((u32) addr < (base + ramips_mem_size_max))) + return addr; + + /* some U-Boot variants uses physical addresses */ + base = ramips_mem_base; + if (((u32) addr > base) && + ((u32) addr < (base + ramips_mem_size_max))) + return (void *)KSEG0ADDR(addr); + + return NULL; +} + +static char ramips_cmdline_buf[COMMAND_LINE_SIZE] __initdata; +static void __init prom_append_cmdline(const char *name, + const char *value) +{ + snprintf(ramips_cmdline_buf, sizeof(ramips_cmdline_buf), + " %s=%s", name, value); + strlcat(arcs_cmdline, ramips_cmdline_buf, sizeof(arcs_cmdline)); +} + +#ifdef CONFIG_IMAGE_CMDLINE_HACK +extern char __image_cmdline[]; + +static int __init use_image_cmdline(void) +{ + char *p = __image_cmdline; + int replace = 0; + + if (*p == '-') { + replace = 1; + p++; + } + + if (*p == '\0') + return 0; + + if (replace) { + strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline)); + } else { + strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline)); + strlcat(arcs_cmdline, p, sizeof(arcs_cmdline)); + } + + return 1; +} +#else +static int inline use_image_cmdline(void) { return 0; } +#endif + +static __init void prom_init_cmdline(int argc, char **argv) +{ + int i; + + if (use_image_cmdline()) + return; + + if (!argv) { + printk(KERN_DEBUG "argv=%p is invalid, skipping\n", + argv); + return; + } + + for (i = 0; i < argc; i++) { + char *p = to_ram_addr(argv[i]); + + if (!p) { + printk(KERN_DEBUG + "argv[%d]=%p is invalid, skipping\n", + i, argv[i]); + continue; + } + + printk(KERN_DEBUG "argv[%d]: %s\n", i, p); + strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline)); + strlcat(arcs_cmdline, p, sizeof(arcs_cmdline)); + } +} + +static __init char *prom_append_env(char **env, const char *envname) +{ +#define PROM_MAX_ENVS 256 + int len = strlen(envname); + int i; + + if (!env) { + printk(KERN_DEBUG "env=%p is not in RAM, skipping\n", + env); + return NULL; + } + + for (i = 0; i < PROM_MAX_ENVS; i++) { + char *p = to_ram_addr(env[i]); + + if (!p) + break; + + printk(KERN_DEBUG "env[%d]: %s\n", i, p); + if (strncmp(envname, p, len) == 0 && p[len] == '=') + prom_append_cmdline(envname, p + len + 1); + } + + return NULL; +#undef PROM_MAX_ENVS +} + +void __init prom_init(void) +{ + int argc; + char **envp; + char **argv; + + ramips_soc_prom_init(); + + printk(KERN_DEBUG + "prom: fw_arg0=%08x, fw_arg1=%08x, fw_arg2=%08x, fw_arg3=%08x\n", + (unsigned int)fw_arg0, (unsigned int)fw_arg1, + (unsigned int)fw_arg2, (unsigned int)fw_arg3); + + argc = fw_arg0; + argv = to_ram_addr((void *)fw_arg1); + prom_init_cmdline(argc, argv); + + envp = to_ram_addr((void *)fw_arg2); + prom_append_env(envp, "board"); + prom_append_env(envp, "ethaddr"); +} + +void __init prom_free_prom_memory(void) +{ + /* We do not have to prom memory to free */ +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/common/setup.c b/target/linux/ramips/files-3.7/arch/mips/ralink/common/setup.c new file mode 100644 index 0000000000..1af855e649 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/common/setup.c @@ -0,0 +1,98 @@ +/* + * Ralink SoC common setup + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/serial_8250.h> + +#include <asm/bootinfo.h> +#include <asm/addrspace.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/machine.h> + +unsigned char ramips_sys_type[RAMIPS_SYS_TYPE_LEN]; +unsigned long (*ramips_get_mem_size)(void); + +const char *get_system_type(void) +{ + return ramips_sys_type; +} + +static void __init detect_mem_size(void) +{ + unsigned long size; + + if (ramips_get_mem_size) { + size = ramips_get_mem_size(); + } else { + void *base; + + base = (void *) KSEG1ADDR(detect_mem_size); + for (size = ramips_mem_size_min; size < ramips_mem_size_max; + size <<= 1 ) { + if (!memcmp(base, base + size, 1024)) + break; + } + } + + add_memory_region(ramips_mem_base, size, BOOT_MEM_RAM); +} + +void __init ramips_early_serial_setup(int line, unsigned base, unsigned freq, + unsigned irq) +{ + struct uart_port p; + int err; + + memset(&p, 0, sizeof(p)); + p.flags = UPF_SKIP_TEST | UPF_FIXED_TYPE; + p.iotype = UPIO_AU; + p.uartclk = freq; + p.regshift = 2; + p.type = PORT_16550A; + + p.mapbase = base; + p.membase = ioremap_nocache(p.mapbase, PAGE_SIZE); + p.line = line; + p.irq = irq; + + err = early_serial_setup(&p); + if (err) + printk(KERN_ERR "early serial%d registration failed %d\n", + line, err); +} + +void __init plat_mem_setup(void) +{ + set_io_port_base(KSEG1); + + detect_mem_size(); + ramips_soc_setup(); +} + +__setup("board=", mips_machtype_setup); + +static int __init ramips_machine_setup(void) +{ + mips_machine_setup(); + return 0; +} + +arch_initcall(ramips_machine_setup); + +static void __init ramips_generic_init(void) +{ +} + +MIPS_MACHINE(RAMIPS_MACH_GENERIC, "Generic", "Generic Ralink board", + ramips_generic_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/Kconfig b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/Kconfig new file mode 100644 index 0000000000..739561c640 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/Kconfig @@ -0,0 +1,36 @@ +if RALINK_RT288X + +menu "Ralink RT288x machine selection" + +config RT288X_MACH_F5D8235_V1 + bool "Belkin F5D8235 V1 board support" + select RALINK_DEV_GPIO_LEDS + +config RT288X_MACH_BR6524N + bool "Edimax BR6524N support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT288X_MACH_RT_N15 + bool "Asus RT-N15 board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT288X_MACH_V11ST_FE + bool "Ralink V11ST-FE board support" + select HW_HAS_PCI + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT288X_MACH_WLI_TX4_AG300N + bool "Buffalo WLI-TX4-AG300N board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT288X_MACH_WZR_AGL300NH + bool "Buffalo WZR-AGL300NH board support" + select RALINK_DEV_GPIO_LEDS + +endmenu + +endif diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/Makefile b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/Makefile new file mode 100644 index 0000000000..eb60c5d10d --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/Makefile @@ -0,0 +1,21 @@ +# +# Makefile for the Ralink RT288x SoC specific parts of the kernel +# +# Copyright (C) 2010 Joonas Lahtinen <joonas.lahtinen@gmail.com> +# Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> +# Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License version 2 as published +# by the Free Software Foundation. + +obj-y := irq.o setup.o rt288x.o devices.o clock.o + +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + +obj-$(CONFIG_RT288X_MACH_F5D8235_V1) += mach-f5d8235-v1.o +obj-$(CONFIG_RT288X_MACH_BR6524N) += mach-br6524n.o +obj-$(CONFIG_RT288X_MACH_RT_N15) += mach-rt-n15.o +obj-$(CONFIG_RT288X_MACH_V11ST_FE) += mach-v11st-fe.o +obj-$(CONFIG_RT288X_MACH_WLI_TX4_AG300N) += mach-wli-tx4-ag300n.o +obj-$(CONFIG_RT288X_MACH_WZR_AGL300NH) += mach-wzr-agl300nh.o diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/clock.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/clock.c new file mode 100644 index 0000000000..36d754dbf6 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/clock.c @@ -0,0 +1,99 @@ +/* + * Ralink RT288X clock API + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/clk.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> +#include "common.h" + +struct clk { + unsigned long rate; +}; + +static struct clk rt288x_cpu_clk; +static struct clk rt288x_sys_clk; +static struct clk rt288x_wdt_clk; +static struct clk rt288x_uart_clk; + +void __init rt288x_clocks_init(void) +{ + u32 t; + + t = rt288x_sysc_rr(SYSC_REG_SYSTEM_CONFIG); + t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK); + + switch (t) { + case SYSTEM_CONFIG_CPUCLK_250: + rt288x_cpu_clk.rate = 250000000; + break; + case SYSTEM_CONFIG_CPUCLK_266: + rt288x_cpu_clk.rate = 266666667; + break; + case SYSTEM_CONFIG_CPUCLK_280: + rt288x_cpu_clk.rate = 280000000; + break; + case SYSTEM_CONFIG_CPUCLK_300: + rt288x_cpu_clk.rate = 300000000; + break; + } + + rt288x_sys_clk.rate = rt288x_cpu_clk.rate / 2; + rt288x_uart_clk.rate = rt288x_sys_clk.rate; + rt288x_wdt_clk.rate = rt288x_sys_clk.rate; +} + +/* + * Linux clock API + */ +struct clk *clk_get(struct device *dev, const char *id) +{ + if (!strcmp(id, "sys")) + return &rt288x_sys_clk; + + if (!strcmp(id, "cpu")) + return &rt288x_cpu_clk; + + if (!strcmp(id, "wdt")) + return &rt288x_wdt_clk; + + if (!strcmp(id, "uart")) + return &rt288x_uart_clk; + + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/common.h b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/common.h new file mode 100644 index 0000000000..f2415c58ba --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/common.h @@ -0,0 +1,16 @@ +/* + * Ralink RT288X SoC common defines + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT288X_COMMON_H +#define _RT288X_COMMON_H + +void rt288x_clocks_init(void); + +#endif /* _RT288X_COMMON_H */
\ No newline at end of file diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/devices.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/devices.c new file mode 100644 index 0000000000..196810a30f --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/devices.c @@ -0,0 +1,211 @@ +/* + * Ralink RT288x SoC platform device registration + * + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/physmap.h> +#include <linux/etherdevice.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/rt2x00_platform.h> + +#include <asm/addrspace.h> + +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> +#include <asm/mach-ralink/ramips_eth_platform.h> + +#include "devices.h" + +static struct resource rt288x_flash0_resources[] = { + { + .flags = IORESOURCE_MEM, + .start = KSEG1ADDR(RT2880_FLASH0_BASE), + .end = KSEG1ADDR(RT2880_FLASH0_BASE) + + RT2880_FLASH0_SIZE - 1, + }, +}; + +struct physmap_flash_data rt288x_flash0_data; +static struct platform_device rt288x_flash0_device = { + .name = "physmap-flash", + .resource = rt288x_flash0_resources, + .num_resources = ARRAY_SIZE(rt288x_flash0_resources), + .dev = { + .platform_data = &rt288x_flash0_data, + }, +}; + +static struct resource rt288x_flash1_resources[] = { + { + .flags = IORESOURCE_MEM, + .start = KSEG1ADDR(RT2880_FLASH1_BASE), + .end = KSEG1ADDR(RT2880_FLASH1_BASE) + + RT2880_FLASH1_SIZE - 1, + }, +}; + +struct physmap_flash_data rt288x_flash1_data; +static struct platform_device rt288x_flash1_device = { + .name = "physmap-flash", + .resource = rt288x_flash1_resources, + .num_resources = ARRAY_SIZE(rt288x_flash1_resources), + .dev = { + .platform_data = &rt288x_flash1_data, + }, +}; + +static int rt288x_flash_instance __initdata; +void __init rt288x_register_flash(unsigned int id) +{ + struct platform_device *pdev; + struct physmap_flash_data *pdata; + u32 t; + int reg; + + switch (id) { + case 0: + pdev = &rt288x_flash0_device; + reg = MEMC_REG_FLASH_CFG0; + break; + case 1: + pdev = &rt288x_flash1_device; + reg = MEMC_REG_FLASH_CFG1; + break; + default: + return; + } + + t = rt288x_memc_rr(reg); + t = (t >> FLASH_CFG_WIDTH_SHIFT) & FLASH_CFG_WIDTH_MASK; + + pdata = pdev->dev.platform_data; + switch (t) { + case FLASH_CFG_WIDTH_8BIT: + pdata->width = 1; + break; + case FLASH_CFG_WIDTH_16BIT: + pdata->width = 2; + break; + case FLASH_CFG_WIDTH_32BIT: + pdata->width = 4; + break; + default: + printk(KERN_ERR "RT288x: flash bank%u witdh is invalid\n", id); + return; + } + + pdev->id = rt288x_flash_instance; + + platform_device_register(pdev); + rt288x_flash_instance++; +} + +static struct resource rt288x_wifi_resources[] = { + { + .start = RT2880_WMAC_BASE, + .end = RT2880_WMAC_BASE + 0x3FFFF, + .flags = IORESOURCE_MEM, + }, { + .start = RT288X_CPU_IRQ_WNIC, + .end = RT288X_CPU_IRQ_WNIC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct rt2x00_platform_data rt288x_wifi_data; +static struct platform_device rt288x_wifi_device = { + .name = "rt2800_wmac", + .resource = rt288x_wifi_resources, + .num_resources = ARRAY_SIZE(rt288x_wifi_resources), + .dev = { + .platform_data = &rt288x_wifi_data, + } +}; + +void __init rt288x_register_wifi(void) +{ + rt288x_wifi_data.eeprom_file_name = "soc_wmac.eeprom"; + platform_device_register(&rt288x_wifi_device); +} + +static void rt288x_fe_reset(void) +{ + rt288x_sysc_wr(RT2880_RESET_FE, SYSC_REG_RESET_CTRL); +} + +static struct resource rt288x_eth_resources[] = { + { + .start = RT2880_FE_BASE, + .end = RT2880_FE_BASE + PAGE_SIZE - 1, + .flags = IORESOURCE_MEM, + }, { + .start = RT288X_CPU_IRQ_FE, + .end = RT288X_CPU_IRQ_FE, + .flags = IORESOURCE_IRQ, + }, +}; + +struct ramips_eth_platform_data rt288x_eth_data; +static struct platform_device rt288x_eth_device = { + .name = "ramips_eth", + .resource = rt288x_eth_resources, + .num_resources = ARRAY_SIZE(rt288x_eth_resources), + .dev = { + .platform_data = &rt288x_eth_data, + } +}; + +void __init rt288x_register_ethernet(void) +{ + struct clk *clk; + + clk = clk_get(NULL, "sys"); + if (IS_ERR(clk)) + panic("unable to get SYS clock, err=%ld", PTR_ERR(clk)); + + rt288x_eth_data.sys_freq = clk_get_rate(clk); + rt288x_eth_data.reset_fe = rt288x_fe_reset; + rt288x_eth_data.min_pkt_len = 64; + + if (!is_valid_ether_addr(rt288x_eth_data.mac)) + random_ether_addr(rt288x_eth_data.mac); + + platform_device_register(&rt288x_eth_device); +} + +static struct resource rt288x_wdt_resources[] = { + { + .start = RT2880_TIMER_BASE, + .end = RT2880_TIMER_BASE + RT2880_TIMER_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device rt288x_wdt_device = { + .name = "ramips-wdt", + .id = -1, + .resource = rt288x_wdt_resources, + .num_resources = ARRAY_SIZE(rt288x_wdt_resources), +}; + +void __init rt288x_register_wdt(void) +{ + u32 t; + + /* enable WDT reset output on pin SRAM_CS_N */ + t = rt288x_sysc_rr(SYSC_REG_CLKCFG); + t |= CLKCFG_SRAM_CS_N_WDT; + rt288x_sysc_wr(t, SYSC_REG_CLKCFG); + + platform_device_register(&rt288x_wdt_device); +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/devices.h b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/devices.h new file mode 100644 index 0000000000..d097e5d90e --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/devices.h @@ -0,0 +1,28 @@ +/* + * Ralink RT288x SoC specific platform definitions + * + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __ASM_MACH_RT288X_PLATFORM_H +#define __ASM_MACH_RT288X_PLATFORM_H + +struct physmap_flash_data; + +extern struct physmap_flash_data rt288x_flash0_data; +extern struct physmap_flash_data rt288x_flash1_data; +void rt288x_register_flash(unsigned int id); + +void rt288x_register_wifi(void); + +extern struct ramips_eth_platform_data rt288x_eth_data; +void rt288x_register_ethernet(void); + +void rt288x_register_wdt(void); + +#endif /* __ASM_MACH_RT288X_PLATFORM_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/early_printk.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/early_printk.c new file mode 100644 index 0000000000..9fd7adb543 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/early_printk.c @@ -0,0 +1,30 @@ +/* + * Ralink RT288x SoC early printk support + * + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/io.h> +#include <linux/serial_reg.h> + +#include <asm/addrspace.h> + +#include <asm/mach-ralink/rt288x_regs.h> + +#define UART_READ(r) \ + __raw_readl((void __iomem *)(KSEG1ADDR(RT2880_UART1_BASE) + 4 * (r))) + +#define UART_WRITE(r, v) \ + __raw_writel((v), (void __iomem *)(KSEG1ADDR(RT2880_UART1_BASE) + 4 * (r))) + +void prom_putchar(unsigned char ch) +{ + while (((UART_READ(UART_REG_LSR)) & UART_LSR_THRE) == 0); + UART_WRITE(UART_REG_TX, ch); + while (((UART_READ(UART_REG_LSR)) & UART_LSR_THRE) == 0); +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/irq.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/irq.c new file mode 100644 index 0000000000..5465a4560d --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/irq.c @@ -0,0 +1,81 @@ +/* + * Ralink RT288x SoC specific interrupt handling + * + * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> + +#include <asm/irq_cpu.h> +#include <asm/mipsregs.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> + +static void rt288x_intc_irq_dispatch(void) +{ + u32 pending; + + pending = ramips_intc_get_status(); + + if (pending & RT2880_INTC_INT_TIMER0) + do_IRQ(RT2880_INTC_IRQ_TIMER0); + + else if (pending & RT2880_INTC_INT_TIMER1) + do_IRQ(RT2880_INTC_IRQ_TIMER1); + + else if (pending & RT2880_INTC_INT_UART0) + do_IRQ(RT2880_INTC_IRQ_UART0); + + else if (pending & RT2880_INTC_INT_PCM) + do_IRQ(RT2880_INTC_IRQ_PCM); + + else if (pending & RT2880_INTC_INT_UART1) + do_IRQ(RT2880_INTC_IRQ_UART1); + + /* TODO: handle PIO interrupts as well */ + + else + spurious_interrupt(); +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned long pending; + + pending = read_c0_status() & read_c0_cause() & ST0_IM; + + if (pending & STATUSF_IP7) + do_IRQ(RT288X_CPU_IRQ_COUNTER); + + else if (pending & STATUSF_IP4) + do_IRQ(RT288X_CPU_IRQ_PCI); + + else if (pending & STATUSF_IP5) + do_IRQ(RT288X_CPU_IRQ_FE); + + else if (pending & STATUSF_IP6) + do_IRQ(RT288X_CPU_IRQ_WNIC); + + else if (pending & STATUSF_IP2) + rt288x_intc_irq_dispatch(); + + else + spurious_interrupt(); +} + +void __init arch_init_irq(void) +{ + mips_cpu_irq_init(); + ramips_intc_irq_init(RT2880_INTC_BASE, RT288X_CPU_IRQ_INTC, + RT288X_INTC_IRQ_BASE); +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-br6524n.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-br6524n.c new file mode 100644 index 0000000000..ff4746cda5 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-br6524n.c @@ -0,0 +1,74 @@ +/* + * Edimax BR6524N board support + * + * Copyright (C) 2012 Florian Fainelli <florian@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ethtool.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> +#include <asm/mach-ralink/ramips_eth_platform.h> + +#include "devices.h" + +#define BR6524N_GPIO_STATUS_LED 12 +#define BR6524N_GPIO_BUTTON_WPS 0 + +#define BR6524N_KEYS_POLL_INTERVAL 20 +#define BR6524N_KEYS_DEBOUNCE_INTERVAL (3 * BR6524N_KEYS_POLL_INTERVAL) + +static struct gpio_led br6524n_leds_gpio[] __initdata = { + { + .name = "br6524n:green:status", + .gpio = BR6524N_GPIO_STATUS_LED, + .active_low = 1, + } +}; + +static struct gpio_keys_button br6524n_gpio_buttons[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = BR6524N_KEYS_DEBOUNCE_INTERVAL, + .gpio = BR6524N_GPIO_BUTTON_WPS, + } +}; + +static void __init br6524n_fe_init(void) +{ + rt288x_gpio_init(RT2880_GPIO_MODE_UART0); + + rt288x_register_flash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(br6524n_leds_gpio), + br6524n_leds_gpio); + + ramips_register_gpio_buttons(-1, BR6524N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(br6524n_gpio_buttons), + br6524n_gpio_buttons); + + rt288x_register_wifi(); + + /* Board is connected to an IC+ IP175C Fast Ethernet switch */ + rt288x_eth_data.speed = SPEED_100; + rt288x_eth_data.duplex = DUPLEX_FULL; + rt288x_eth_data.tx_fc = 1; + rt288x_eth_data.rx_fc = 1; + rt288x_eth_data.phy_mask = BIT(0); + rt288x_register_ethernet(); + + rt288x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_BR6524N, "BR6524N", "Edimax BR6524N", br6524n_fe_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-f5d8235-v1.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-f5d8235-v1.c new file mode 100644 index 0000000000..7679572bb5 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-f5d8235-v1.c @@ -0,0 +1,106 @@ +/* + * Belkin F5D825 V1 board support + * + * Copyright (C) 2011 Cezary Jackiewicz <cezary.jackiewicz@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> + +#include "devices.h" + +#include <linux/rtl8366.h> +#include <linux/ethtool.h> + +#include <asm/mach-ralink/ramips_eth_platform.h> + +#define F5D8235_GPIO_RTL8366_SCK 2 +#define F5D8235_GPIO_RTL8366_SDA 1 + +#define F5D8235_GPIO_LED_USB_BLUE 7 +#define F5D8235_GPIO_LED_USB_ORANGE 8 +#define F5D8235_GPIO_BUTTON_WPS 0 +#define F5D8235_GPIO_BUTTON_RESET 9 + +#define F5D8235_KEYS_POLL_INTERVAL 20 +#define F5D8235_KEYS_DEBOUNCE_INTERVAL (3 * F5D8235_KEYS_POLL_INTERVAL) + +static struct rtl8366_platform_data f5d8235_rtl8366s_data = { + .gpio_sda = F5D8235_GPIO_RTL8366_SDA, + .gpio_sck = F5D8235_GPIO_RTL8366_SCK, +}; + +static struct platform_device f5d8235_rtl8366s_device = { + .name = RTL8366S_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &f5d8235_rtl8366s_data, + } +}; + +static struct gpio_led f5d8235_leds_gpio[] __initdata = { + { + .name = "f5d8235-v1:blue:storage", + .gpio = F5D8235_GPIO_LED_USB_BLUE, + .active_low = 1, + },{ + .name = "f5d8235-v1:orange:storage", + .gpio = F5D8235_GPIO_LED_USB_ORANGE, + .active_low = 1, + } +}; + +static struct gpio_keys_button f5d8235_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = F5D8235_KEYS_DEBOUNCE_INTERVAL, + .gpio = F5D8235_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = F5D8235_KEYS_DEBOUNCE_INTERVAL, + .gpio = F5D8235_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static void __init f5d8235_init(void) +{ + rt288x_gpio_init(RT2880_GPIO_MODE_UART0 | RT2880_GPIO_MODE_I2C); + + rt288x_register_flash(0); + rt288x_register_wifi(); + rt288x_register_wdt(); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(f5d8235_leds_gpio), + f5d8235_leds_gpio); + + ramips_register_gpio_buttons(-1, F5D8235_KEYS_POLL_INTERVAL, + ARRAY_SIZE(f5d8235_gpio_buttons), + f5d8235_gpio_buttons); + + platform_device_register(&f5d8235_rtl8366s_device); + + rt288x_eth_data.speed = SPEED_1000; + rt288x_eth_data.duplex = DUPLEX_FULL; + rt288x_eth_data.tx_fc = 1; + rt288x_eth_data.rx_fc = 1; + rt288x_register_ethernet(); +} + +MIPS_MACHINE(RAMIPS_MACH_F5D8235_V1, "F5D8235_V1", + "Belkin F5D8235 v1", f5d8235_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-rt-n15.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-rt-n15.c new file mode 100644 index 0000000000..1085b82f91 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-rt-n15.c @@ -0,0 +1,99 @@ +/* + * Asus RT-N15 board support + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/rtl8366.h> +#include <linux/ethtool.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> +#include <asm/mach-ralink/ramips_eth_platform.h> + +#include "devices.h" + +#define RT_N15_GPIO_LED_POWER 11 +#define RT_N15_GPIO_BUTTON_WPS 0 +#define RT_N15_GPIO_BUTTON_RESET 12 + +#define RT_N15_GPIO_RTL8366_SCK 2 +#define RT_N15_GPIO_RTL8366_SDA 1 + +#define RT_N15_KEYS_POLL_INTERVAL 20 +#define RT_N15_KEYS_DEBOUNCE_INTERVAL (3 * RT_N15_KEYS_POLL_INTERVAL) + +static struct gpio_led rt_n15_leds_gpio[] __initdata = { + { + .name = "rt-n15:blue:power", + .gpio = RT_N15_GPIO_LED_POWER, + .active_low = 1, + } +}; + +static struct gpio_keys_button rt_n15_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = RT_N15_KEYS_DEBOUNCE_INTERVAL, + .gpio = RT_N15_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = RT_N15_KEYS_DEBOUNCE_INTERVAL, + .gpio = RT_N15_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static struct rtl8366_platform_data rt_n15_rtl8366s_data = { + .gpio_sda = RT_N15_GPIO_RTL8366_SDA, + .gpio_sck = RT_N15_GPIO_RTL8366_SCK, +}; + +static struct platform_device rt_n15_rtl8366s_device = { + .name = RTL8366S_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &rt_n15_rtl8366s_data, + } +}; + +static void __init rt_n15_init(void) +{ + rt288x_gpio_init(RT2880_GPIO_MODE_UART0 | RT2880_GPIO_MODE_I2C); + + rt288x_register_flash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n15_leds_gpio), + rt_n15_leds_gpio); + + ramips_register_gpio_buttons(-1, RT_N15_KEYS_POLL_INTERVAL, + ARRAY_SIZE(rt_n15_gpio_buttons), + rt_n15_gpio_buttons); + + platform_device_register(&rt_n15_rtl8366s_device); + + rt288x_register_wifi(); + + rt288x_eth_data.speed = SPEED_1000; + rt288x_eth_data.duplex = DUPLEX_FULL; + rt288x_eth_data.tx_fc = 1; + rt288x_eth_data.rx_fc = 1; + rt288x_register_ethernet(); + rt288x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_RT_N15, "RT-N15", "Asus RT-N15", rt_n15_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-v11st-fe.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-v11st-fe.c new file mode 100644 index 0000000000..667fe92dc0 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-v11st-fe.c @@ -0,0 +1,75 @@ +/* + * Ralink V11ST-FE board support + * + * Copyright (C) 2012 Florian Fainelli <florian@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ethtool.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> +#include <asm/mach-ralink/ramips_eth_platform.h> + +#include "devices.h" + +#define V11ST_FE_GPIO_STATUS_LED 12 +#define V11ST_FE_GPIO_BUTTON_WPS 0 + +#define V11ST_FE_KEYS_POLL_INTERVAL 20 +#define V11ST_FE_KEYS_DEBOUNCE_INTERVAL (3 * V11ST_FE_KEYS_POLL_INTERVAL) + +static struct gpio_led v11st_fe_leds_gpio[] __initdata = { + { + .name = "v11st-fe:green:status", + .gpio = V11ST_FE_GPIO_STATUS_LED, + .active_low = 1, + } +}; + +static struct gpio_keys_button v11st_fe_gpio_buttons[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = V11ST_FE_KEYS_DEBOUNCE_INTERVAL, + .gpio = V11ST_FE_GPIO_BUTTON_WPS, + } +}; + +static void __init rt_v11st_fe_init(void) +{ + rt288x_gpio_init(RT2880_GPIO_MODE_UART0); + + rt288x_register_flash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(v11st_fe_leds_gpio), + v11st_fe_leds_gpio); + + ramips_register_gpio_buttons(-1, V11ST_FE_KEYS_POLL_INTERVAL, + ARRAY_SIZE(v11st_fe_gpio_buttons), + v11st_fe_gpio_buttons); + + rt288x_register_wifi(); + + /* Board is connected to an IC+ IP175C Fast Ethernet switch */ + rt288x_eth_data.speed = SPEED_100; + rt288x_eth_data.duplex = DUPLEX_FULL; + rt288x_eth_data.tx_fc = 1; + rt288x_eth_data.rx_fc = 1; + rt288x_eth_data.phy_mask = BIT(0); + rt288x_register_ethernet(); + + rt288x_register_wdt(); + rt288x_register_pci(); +} + +MIPS_MACHINE(RAMIPS_MACH_V11ST_FE, "V11ST-FE", "Ralink V11ST-FE", rt_v11st_fe_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-wli-tx4-ag300n.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-wli-tx4-ag300n.c new file mode 100644 index 0000000000..02fac0b3c5 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-wli-tx4-ag300n.c @@ -0,0 +1,102 @@ +/* + * Buffalo WLI-TX4-AG300N board support + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/ethtool.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> +#include <asm/mach-ralink/ramips_eth_platform.h> + +#include "devices.h" + +#define WLI_TX4_AG300N_GPIO_LED_DIAG 10 +#define WLI_TX4_AG300N_GPIO_LED_POWER 12 +#define WLI_TX4_AG300N_GPIO_LED_SECURITY 13 + +#define WLI_TX4_AG300N_GPIO_BUTTON_AOSS 0 +#define WLI_TX4_AG300N_GPIO_BUTTON_BW_SWITCH 8 +#define WLI_TX4_AG300N_GPIO_BUTTON_RESET 9 + +#define WLI_TX4_AG300N_KEYS_POLL_INTERVAL 20 +#define WLI_TX4_AG300N_KEYS_DEBOUNCE_INTERVAL (3 * WLI_TX4_AG300N_KEYS_POLL_INTERVAL) + +static struct gpio_led wli_tx4_ag300n_leds_gpio[] __initdata = { + { + .name = "buffalo:blue:power", + .gpio = WLI_TX4_AG300N_GPIO_LED_POWER, + .active_low = 1, + }, + { + .name = "buffalo:red:diag", + .gpio = WLI_TX4_AG300N_GPIO_LED_DIAG, + .active_low = 1, + }, + { + .name = "buffalo:blue:security", + .gpio = WLI_TX4_AG300N_GPIO_LED_SECURITY, + .active_low = 0, + }, +}; + +static struct gpio_keys_button wli_tx4_ag300n_gpio_buttons[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WLI_TX4_AG300N_KEYS_DEBOUNCE_INTERVAL, + .gpio = WLI_TX4_AG300N_GPIO_BUTTON_RESET, + .active_low = 1, + }, + { + .desc = "AOSS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WLI_TX4_AG300N_KEYS_DEBOUNCE_INTERVAL, + .gpio = WLI_TX4_AG300N_GPIO_BUTTON_AOSS, + .active_low = 1, + }, + { + .desc = "Bandwidth switch", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = WLI_TX4_AG300N_KEYS_DEBOUNCE_INTERVAL, + .gpio = WLI_TX4_AG300N_GPIO_BUTTON_BW_SWITCH, + .active_low = 0, + }, +}; + +static void __init wli_tx4_ag300n_init(void) +{ + rt288x_gpio_init(RT2880_GPIO_MODE_UART0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(wli_tx4_ag300n_leds_gpio), + wli_tx4_ag300n_leds_gpio); + ramips_register_gpio_buttons(-1, WLI_TX4_AG300N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wli_tx4_ag300n_gpio_buttons), + wli_tx4_ag300n_gpio_buttons); + + rt288x_register_flash(0); + rt288x_register_wifi(); + rt288x_register_wdt(); + + rt288x_eth_data.speed = SPEED_100; + rt288x_eth_data.duplex = DUPLEX_FULL; + rt288x_eth_data.tx_fc = 1; + rt288x_eth_data.rx_fc = 1; + rt288x_register_ethernet(); +} + +MIPS_MACHINE(RAMIPS_MACH_WLI_TX4_AG300N, "WLI-TX4-AG300N", + "Buffalo WLI-TX4-AG300N", wli_tx4_ag300n_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-wzr-agl300nh.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-wzr-agl300nh.c new file mode 100644 index 0000000000..6bd7a45423 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/mach-wzr-agl300nh.c @@ -0,0 +1,77 @@ +/* + * Buffalo WZR-AGL300NH board support + * + * Copyright (C) 2010 Joonas Lahtinen <joonas.lahtinen@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> + +#include "devices.h" + +/* + * MTD layout from stock firmware: + * mtd0: 00030000 00010000 "uboot" + * mtd1: 00010000 00010000 "uboot_environ" + * mtd2: 00010000 00010000 "factory_default" + * mtd3: 000b0000 00010000 "linux" + * mtd4: 002f0000 00010000 "rootfs" + * mtd5: 00010000 00010000 "user_property" + */ + +static struct mtd_partition wzr_agl300nh_partitions[] = { + { + .name = "uboot", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "uboot_environ", + .offset = 0x030000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "factory_default", + .offset = 0x040000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "linux", + .offset = 0x050000, + .size = 0x0b0000, + }, { + .name = "rootfs", + .offset = 0x100000, + .size = 0x2f0000, + }, { + .name = "user_property", + .offset = 0x3f0000, + .size = 0x010000, + } +}; + +static void __init wzr_agl300nh_init(void) +{ + rt288x_gpio_init(RT2880_GPIO_MODE_UART0); + + rt288x_flash0_data.nr_parts = ARRAY_SIZE(wzr_agl300nh_partitions); + rt288x_flash0_data.parts = wzr_agl300nh_partitions; + rt288x_register_flash(0); + + rt288x_register_wifi(); + rt288x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_WZR_AGL300NH, "WZR-AGL300NH", + "Buffalo WZR-AGL300NH", wzr_agl300nh_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/rt288x.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/rt288x.c new file mode 100644 index 0000000000..c51ad98b3a --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/rt288x.c @@ -0,0 +1,153 @@ +/* + * Ralink RT288x SoC specific setup + * + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/ramips_gpio.h> +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> + +void __iomem * rt288x_sysc_base; +void __iomem * rt288x_memc_base; + +void __init ramips_soc_prom_init(void) +{ + void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT2880_SYSC_BASE); + u32 n0; + u32 n1; + u32 id; + + n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0); + n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1); + id = __raw_readl(sysc + SYSC_REG_CHIP_ID); + + snprintf(ramips_sys_type, RAMIPS_SYS_TYPE_LEN, + "Ralink %c%c%c%c%c%c%c%c id:%u rev:%u", + (char) (n0 & 0xff), (char) ((n0 >> 8) & 0xff), + (char) ((n0 >> 16) & 0xff), (char) ((n0 >> 24) & 0xff), + (char) (n1 & 0xff), (char) ((n1 >> 8) & 0xff), + (char) ((n1 >> 16) & 0xff), (char) ((n1 >> 24) & 0xff), + (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK, + (id & CHIP_ID_REV_MASK)); + + ramips_mem_base = RT2880_SDRAM_BASE; + ramips_mem_size_min = RT288X_MEM_SIZE_MIN; + ramips_mem_size_max = RT288X_MEM_SIZE_MAX; +} + +static struct ramips_gpio_chip rt288x_gpio_chips[] = { + { + .chip = { + .label = "RT288X-GPIO0", + .base = 0, + .ngpio = 24, + }, + .regs = { + [RAMIPS_GPIO_REG_INT] = 0x00, + [RAMIPS_GPIO_REG_EDGE] = 0x04, + [RAMIPS_GPIO_REG_RENA] = 0x08, + [RAMIPS_GPIO_REG_FENA] = 0x0c, + [RAMIPS_GPIO_REG_DATA] = 0x20, + [RAMIPS_GPIO_REG_DIR] = 0x24, + [RAMIPS_GPIO_REG_POL] = 0x28, + [RAMIPS_GPIO_REG_SET] = 0x2c, + [RAMIPS_GPIO_REG_RESET] = 0x30, + [RAMIPS_GPIO_REG_TOGGLE] = 0x34, + }, + .map_base = RT2880_PIO_BASE, + .map_size = RT2880_PIO_SIZE, + }, + { + .chip = { + .label = "RT288X-GPIO1", + .base = 24, + .ngpio = 16, + }, + .regs = { + [RAMIPS_GPIO_REG_INT] = 0x38, + [RAMIPS_GPIO_REG_EDGE] = 0x3c, + [RAMIPS_GPIO_REG_RENA] = 0x40, + [RAMIPS_GPIO_REG_FENA] = 0x44, + [RAMIPS_GPIO_REG_DATA] = 0x48, + [RAMIPS_GPIO_REG_DIR] = 0x4c, + [RAMIPS_GPIO_REG_POL] = 0x50, + [RAMIPS_GPIO_REG_SET] = 0x54, + [RAMIPS_GPIO_REG_RESET] = 0x58, + [RAMIPS_GPIO_REG_TOGGLE] = 0x5c, + }, + .map_base = RT2880_PIO_BASE, + .map_size = RT2880_PIO_SIZE, + }, + { + .chip = { + .label = "RT288X-GPIO2", + .base = 40, + .ngpio = 32, + }, + .regs = { + [RAMIPS_GPIO_REG_INT] = 0x60, + [RAMIPS_GPIO_REG_EDGE] = 0x64, + [RAMIPS_GPIO_REG_RENA] = 0x68, + [RAMIPS_GPIO_REG_FENA] = 0x6c, + [RAMIPS_GPIO_REG_DATA] = 0x70, + [RAMIPS_GPIO_REG_DIR] = 0x74, + [RAMIPS_GPIO_REG_POL] = 0x78, + [RAMIPS_GPIO_REG_SET] = 0x7c, + [RAMIPS_GPIO_REG_RESET] = 0x80, + [RAMIPS_GPIO_REG_TOGGLE] = 0x84, + }, + .map_base = RT2880_PIO_BASE, + .map_size = RT2880_PIO_SIZE, + }, +}; + +static struct ramips_gpio_data rt288x_gpio_data = { + .chips = rt288x_gpio_chips, + .num_chips = ARRAY_SIZE(rt288x_gpio_chips), +}; + +static void rt288x_gpio_reserve(int first, int last) +{ + for (; first <= last; first++) + gpio_request(first, "reserved"); +} + +void __init rt288x_gpio_init(u32 mode) +{ + rt288x_sysc_wr(mode, SYSC_REG_GPIO_MODE); + + ramips_gpio_init(&rt288x_gpio_data); + if ((mode & RT2880_GPIO_MODE_I2C) == 0) + rt288x_gpio_reserve(1, 2); + + if ((mode & RT2880_GPIO_MODE_SPI) == 0) + rt288x_gpio_reserve(3, 6); + + if ((mode & RT2880_GPIO_MODE_UART0) == 0) + rt288x_gpio_reserve(7, 14); + + if ((mode & RT2880_GPIO_MODE_JTAG) == 0) + rt288x_gpio_reserve(17, 21); + + if ((mode & RT2880_GPIO_MODE_MDIO) == 0) + rt288x_gpio_reserve(22, 23); + + if ((mode & RT2880_GPIO_MODE_SDRAM) == 0) + rt288x_gpio_reserve(24, 39); + + if ((mode & RT2880_GPIO_MODE_PCI) == 0) + rt288x_gpio_reserve(40, 71); +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/setup.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/setup.c new file mode 100644 index 0000000000..be474b5292 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt288x/setup.c @@ -0,0 +1,88 @@ +/* + * Ralink RT288x SoC specific setup + * + * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/clk.h> + +#include <asm/mips_machine.h> +#include <asm/reboot.h> +#include <asm/time.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/rt288x.h> +#include <asm/mach-ralink/rt288x_regs.h> +#include "common.h" + +static void rt288x_restart(char *command) +{ + rt288x_sysc_wr(RT2880_RESET_SYSTEM, SYSC_REG_RESET_CTRL); + while (1) + if (cpu_wait) + cpu_wait(); +} + +static void rt288x_halt(void) +{ + while (1) + cpu_wait(); +} + +unsigned int __cpuinit get_c0_compare_irq(void) +{ + return CP0_LEGACY_COMPARE_IRQ; +} + +void __init ramips_soc_setup(void) +{ + struct clk *clk; + + rt288x_sysc_base = ioremap_nocache(RT2880_SYSC_BASE, RT2880_SYSC_SIZE); + rt288x_memc_base = ioremap_nocache(RT2880_MEMC_BASE, RT2880_MEMC_SIZE); + + rt288x_clocks_init(); + + clk = clk_get(NULL, "cpu"); + if (IS_ERR(clk)) + panic("unable to get CPU clock, err=%ld", PTR_ERR(clk)); + + printk(KERN_INFO "%s running at %lu.%02lu MHz\n", ramips_sys_type, + clk_get_rate(clk) / 1000000, + (clk_get_rate(clk) % 1000000) * 100 / 1000000); + + _machine_restart = rt288x_restart; + _machine_halt = rt288x_halt; + pm_power_off = rt288x_halt; + + clk = clk_get(NULL, "uart"); + if (IS_ERR(clk)) + panic("unable to get UART clock, err=%ld", PTR_ERR(clk)); + + ramips_early_serial_setup(0, RT2880_UART0_BASE, clk_get_rate(clk), + RT2880_INTC_IRQ_UART0); + ramips_early_serial_setup(1, RT2880_UART1_BASE, clk_get_rate(clk), + RT2880_INTC_IRQ_UART1); +} + +void __init plat_time_init(void) +{ + struct clk *clk; + + clk = clk_get(NULL, "cpu"); + if (IS_ERR(clk)) + panic("unable to get CPU clock, err=%ld", PTR_ERR(clk)); + + mips_hpt_frequency = clk_get_rate(clk) / 2; +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/Kconfig b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/Kconfig new file mode 100644 index 0000000000..700a983388 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/Kconfig @@ -0,0 +1,219 @@ +if RALINK_RT305X + +menu "Ralink RT350x machine selection" + +config RT305X_MACH_CARAMBOLA + bool "8devices Carambola dev board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_3G_6200N + bool "Edimax 3G-6200N board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_3G300M + bool "Tenda 3G300M board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_BR6425 + bool "Edimax BR-6425 board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_WR6202 + bool "Accton WR6202" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_AIR3GII + bool "AirLive Air3GII board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_ALL0256N + bool "Allnet ALL0256N support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_ALL5002 + bool "Allnet ALL5002 support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_W502U + bool "ALFA Networks W502U board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_ARGUS_ATP52B + bool "Argus ATP-52B support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_RT_G32_REVB + bool "Asus RT-G32 revB board support" + select RALINK_DEV_GPIO_BUTTONS + +config RT305X_MACH_RT_N10_PLUS + bool "Asus RT-N10+ board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_WL_330N + bool "Asus WL-330N board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_WL_330N3G + bool "Asus WL-330N3G board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_HW550_3G + bool "Aztech HW550-3G support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_F5D8235_V2 + bool "Belkin F5D8235 v2 support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_WHR_G300N + bool "Buffalo WHR-G300N support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_DIR_300_REVB + bool "D-Link DIR-300 revB board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_DIR_615_H1 + bool "D-Link DIR-615 H1 board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_DAP_1350 + bool "D-Link DAP-1350 board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_ESR_9753 + bool "EnGenius ESR-9753 support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_BROADWAY + bool "Hauppauge Broadway support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_FONERA20N + bool "La Fonera20N board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_RT_N13U + bool "ASUS RT-N13U board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_FREESTATION5 + bool "ARC FreeStation5" + +config RT305X_MACH_MOFI3500_3GN + bool "MoFi Network MOFI3500-3GN support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_WR512_3GN + bool "SH-WR512NU/WS-WR512N1-like 3GN router" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_UR_326N4G + bool "UR-326N4G Wireless N router" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_UR_336UN + bool "UR-336UN Wireless N router" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_NW718 + bool "Netcore NW718" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_BC2 + bool "NexAira BC2" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_OMNI_EMB + bool "Omnima MiniEMBWiFi" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_PSR_680W + bool "Petatel PSR-680W Wireless 3G Router support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_PWH2004 + bool "Prolink PWH2004 / Abocom WR5205 support (32M RAM, 8M flash)" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_V22RW_2X2 + bool "Ralink AP-RT3052-V22RW-2X2 board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_W306R_V20 + bool "Tenda W306R V2.0 board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_WL341V3 + bool "Sitecom WL-341 v3 board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_WL351 + bool "Sitecom WL-351 support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_SL_R7205 + bool "Skyline SL-R7205 Wireless 3G Router support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_WCR150GN + bool "Sparklan WCR-150GN support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_NBG_419N + bool "ZyXEL NBG-419N support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_MZKW300NH2 + bool "Planex MZK-W300NH2 Router support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT305X_MACH_XDX_RN502J + bool "Unknown board XDX-RN502J" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +endmenu + +endif diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/Makefile b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/Makefile new file mode 100644 index 0000000000..47e9ce52ba --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/Makefile @@ -0,0 +1,56 @@ +# +# Makefile for the Ralink RT305x SoC specific parts of the kernel +# +# Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License version 2 as published +# by the Free Software Foundation. + +obj-y := irq.o setup.o devices.o rt305x.o clock.o + +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + +obj-$(CONFIG_RT305X_MACH_3G_6200N) += mach-3g-6200n.o +obj-$(CONFIG_RT305X_MACH_3G300M) += mach-3g300m.o +obj-$(CONFIG_RT305X_MACH_ARGUS_ATP52B) += mach-argus-atp52b.o +obj-$(CONFIG_RT305X_MACH_BC2) += mach-bc2.o +obj-$(CONFIG_RT305X_MACH_AIR3GII) += mach-air3gii.o +obj-$(CONFIG_RT305X_MACH_ALL0256N) += mach-all0256n.o +obj-$(CONFIG_RT305X_MACH_ALL5002) += mach-all5002.o +obj-$(CONFIG_RT305X_MACH_BR6425) += mach-br6425.o +obj-$(CONFIG_RT305X_MACH_BROADWAY) += mach-broadway.o +obj-$(CONFIG_RT305X_MACH_CARAMBOLA) += mach-carambola.o +obj-$(CONFIG_RT305X_MACH_DIR_300_REVB) += mach-dir-300-revb.o +obj-$(CONFIG_RT305X_MACH_DIR_615_H1) += mach-dir-615-h1.o +obj-$(CONFIG_RT305X_MACH_DAP_1350) += mach-dap-1350.o +obj-$(CONFIG_RT305X_MACH_ESR_9753) += mach-esr-9753.o +obj-$(CONFIG_RT305X_MACH_F5D8235_V2) += mach-f5d8235-v2.o +obj-$(CONFIG_RT305X_MACH_FONERA20N) += mach-fonera20n.o +obj-$(CONFIG_RT305X_MACH_RT_N13U) += mach-rt-n13u.o +obj-$(CONFIG_RT305X_MACH_FREESTATION5) += mach-freestation5.o +obj-$(CONFIG_RT305X_MACH_HW550_3G) += mach-hw550-3g.o +obj-$(CONFIG_RT305X_MACH_MOFI3500_3GN) += mach-mofi3500-3gn.o +obj-$(CONFIG_RT305X_MACH_NBG_419N) += mach-nbg-419n.o +obj-$(CONFIG_RT305X_MACH_NW718) += mach-nw718.o +obj-$(CONFIG_RT305X_MACH_OMNI_EMB) += mach-omni-emb.o +obj-$(CONFIG_RT305X_MACH_PSR_680W) += mach-psr-680w.o +obj-$(CONFIG_RT305X_MACH_PWH2004) += mach-pwh2004.o +obj-$(CONFIG_RT305X_MACH_RT_G32_REVB) += mach-rt-g32-revb.o +obj-$(CONFIG_RT305X_MACH_RT_N10_PLUS) += mach-rt-n10-plus.o +obj-$(CONFIG_RT305X_MACH_SL_R7205) += mach-sl-r7205.o +obj-$(CONFIG_RT305X_MACH_V22RW_2X2) += mach-v22rw-2x2.o +obj-$(CONFIG_RT305X_MACH_W306R_V20) += mach-w306r-v20.o +obj-$(CONFIG_RT305X_MACH_W502U) += mach-w502u.o +obj-$(CONFIG_RT305X_MACH_WCR150GN) += mach-wcr150gn.o +obj-$(CONFIG_RT305X_MACH_WHR_G300N) += mach-whr-g300n.o +obj-$(CONFIG_RT305X_MACH_WR512_3GN) += mach-wr512-3gn.o +obj-$(CONFIG_RT305X_MACH_UR_326N4G) += mach-ur-326n4g.o +obj-$(CONFIG_RT305X_MACH_UR_336UN) += mach-ur-336un.o +obj-$(CONFIG_RT305X_MACH_WL_330N) += mach-wl-330n.o +obj-$(CONFIG_RT305X_MACH_WL_330N3G) += mach-wl-330n3g.o +obj-$(CONFIG_RT305X_MACH_WL341V3) += mach-wl341v3.o +obj-$(CONFIG_RT305X_MACH_WL351) += mach-wl351.o +obj-$(CONFIG_RT305X_MACH_WR6202) += mach-wr6202.o +obj-$(CONFIG_RT305X_MACH_MZKW300NH2) += mach-mzk-w300nh2.o +obj-$(CONFIG_RT305X_MACH_XDX_RN502J) += mach-xdx-rn502j.o diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/clock.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/clock.c new file mode 100644 index 0000000000..c46a1747b5 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/clock.c @@ -0,0 +1,133 @@ +/* + * Ralink RT305X clock API + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/clk.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> +#include "common.h" + +struct clk { + unsigned long rate; +}; + +static struct clk rt305x_cpu_clk; +static struct clk rt305x_sys_clk; +static struct clk rt305x_wdt_clk; +static struct clk rt305x_uart_clk; + +void __init rt305x_clocks_init(void) +{ + u32 t; + + t = rt305x_sysc_rr(SYSC_REG_SYSTEM_CONFIG); + + if (soc_is_rt305x() || soc_is_rt3350()) { + t = (t >> RT305X_SYSCFG_CPUCLK_SHIFT) & + RT305X_SYSCFG_CPUCLK_MASK; + switch (t) { + case RT305X_SYSCFG_CPUCLK_LOW: + rt305x_cpu_clk.rate = 320000000; + break; + case RT305X_SYSCFG_CPUCLK_HIGH: + rt305x_cpu_clk.rate = 384000000; + break; + } + rt305x_sys_clk.rate = rt305x_cpu_clk.rate / 3; + rt305x_uart_clk.rate = rt305x_sys_clk.rate; + rt305x_wdt_clk.rate = rt305x_sys_clk.rate; + } else if (soc_is_rt3352()) { + t = (t >> RT3352_SYSCFG0_CPUCLK_SHIFT) & + RT3352_SYSCFG0_CPUCLK_MASK; + switch (t) { + case RT3352_SYSCFG0_CPUCLK_LOW: + rt305x_cpu_clk.rate = 384000000; + break; + case RT3352_SYSCFG0_CPUCLK_HIGH: + rt305x_cpu_clk.rate = 400000000; + break; + } + rt305x_sys_clk.rate = rt305x_cpu_clk.rate / 3; + rt305x_uart_clk.rate = 40000000; + rt305x_wdt_clk.rate = rt305x_sys_clk.rate; + } else if (soc_is_rt5350()) { + t = (t >> RT5350_SYSCFG0_CPUCLK_SHIFT) & + RT5350_SYSCFG0_CPUCLK_MASK; + switch (t) { + case RT5350_SYSCFG0_CPUCLK_360: + rt305x_cpu_clk.rate = 360000000; + rt305x_sys_clk.rate = rt305x_cpu_clk.rate / 3; + break; + case RT5350_SYSCFG0_CPUCLK_320: + rt305x_cpu_clk.rate = 320000000; + rt305x_sys_clk.rate = rt305x_cpu_clk.rate / 4; + break; + case RT5350_SYSCFG0_CPUCLK_300: + rt305x_cpu_clk.rate = 300000000; + rt305x_sys_clk.rate = rt305x_cpu_clk.rate / 3; + break; + default: + BUG(); + } + rt305x_uart_clk.rate = 40000000; + rt305x_wdt_clk.rate = rt305x_sys_clk.rate; + } else { + BUG(); + } + +} + +/* + * Linux clock API + */ +struct clk *clk_get(struct device *dev, const char *id) +{ + if (!strcmp(id, "sys")) + return &rt305x_sys_clk; + + if (!strcmp(id, "cpu")) + return &rt305x_cpu_clk; + + if (!strcmp(id, "wdt")) + return &rt305x_wdt_clk; + + if (!strcmp(id, "uart")) + return &rt305x_uart_clk; + + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/common.h b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/common.h new file mode 100644 index 0000000000..48ac43e81b --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/common.h @@ -0,0 +1,16 @@ +/* + * Ralink RT305x SoC common defines + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT305X_COMMON_H +#define _RT305X_COMMON_H + +void rt305x_clocks_init(void); + +#endif /* _RT305X_COMMON_H */
\ No newline at end of file diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/devices.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/devices.c new file mode 100644 index 0000000000..f16ba6d5f1 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/devices.c @@ -0,0 +1,428 @@ +/* + * Ralink RT305x SoC platform device registration + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/spi.h> +#include <linux/rt2x00_platform.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/usb/ehci_pdriver.h> +#include <linux/usb/ohci_pdriver.h> + +#include <asm/addrspace.h> + +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> +#include "devices.h" + +#include <ramips_eth_platform.h> +#include <rt305x_esw_platform.h> + +static struct resource rt305x_flash0_resources[] = { + { + .flags = IORESOURCE_MEM, + .start = KSEG1ADDR(RT305X_FLASH0_BASE), + .end = KSEG1ADDR(RT305X_FLASH0_BASE) + + RT305X_FLASH0_SIZE - 1, + }, +}; + +struct physmap_flash_data rt305x_flash0_data; +static struct platform_device rt305x_flash0_device = { + .name = "physmap-flash", + .resource = rt305x_flash0_resources, + .num_resources = ARRAY_SIZE(rt305x_flash0_resources), + .dev = { + .platform_data = &rt305x_flash0_data, + }, +}; + +static struct resource rt305x_flash1_resources[] = { + { + .flags = IORESOURCE_MEM, + .start = KSEG1ADDR(RT305X_FLASH1_BASE), + .end = KSEG1ADDR(RT305X_FLASH1_BASE) + + RT305X_FLASH1_SIZE - 1, + }, +}; + +struct physmap_flash_data rt305x_flash1_data; +static struct platform_device rt305x_flash1_device = { + .name = "physmap-flash", + .resource = rt305x_flash1_resources, + .num_resources = ARRAY_SIZE(rt305x_flash1_resources), + .dev = { + .platform_data = &rt305x_flash1_data, + }, +}; + +static int rt305x_flash_instance __initdata; +void __init rt305x_register_flash(unsigned int id) +{ + struct platform_device *pdev; + struct physmap_flash_data *pdata; + u32 t; + int reg; + + switch (id) { + case 0: + pdev = &rt305x_flash0_device; + reg = MEMC_REG_FLASH_CFG0; + break; + case 1: + pdev = &rt305x_flash1_device; + reg = MEMC_REG_FLASH_CFG1; + break; + default: + return; + } + + t = rt305x_memc_rr(reg); + t = (t >> FLASH_CFG_WIDTH_SHIFT) & FLASH_CFG_WIDTH_MASK; + + pdata = pdev->dev.platform_data; + switch (t) { + case FLASH_CFG_WIDTH_8BIT: + pdata->width = 1; + break; + case FLASH_CFG_WIDTH_16BIT: + pdata->width = 2; + break; + case FLASH_CFG_WIDTH_32BIT: + pdata->width = 4; + break; + default: + printk(KERN_ERR "RT305x: flash bank%u witdh is invalid\n", id); + return; + } + + pdev->id = rt305x_flash_instance; + + platform_device_register(pdev); + rt305x_flash_instance++; +} + +static void rt305x_fe_reset(void) +{ + u32 reset_bits = RT305X_RESET_FE; + + if (soc_is_rt5350()) + reset_bits |= RT305X_RESET_ESW; + rt305x_sysc_wr(reset_bits, SYSC_REG_RESET_CTRL); + rt305x_sysc_wr(0, SYSC_REG_RESET_CTRL); +} + +static struct resource rt305x_eth_resources[] = { + { + .start = RT305X_FE_BASE, + .end = RT305X_FE_BASE + PAGE_SIZE - 1, + .flags = IORESOURCE_MEM, + }, { + .start = RT305X_CPU_IRQ_FE, + .end = RT305X_CPU_IRQ_FE, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct ramips_eth_platform_data ramips_eth_data = { + .mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 }, + .reset_fe = rt305x_fe_reset, + .min_pkt_len = 64, +}; + +static struct platform_device rt305x_eth_device = { + .name = "ramips_eth", + .resource = rt305x_eth_resources, + .num_resources = ARRAY_SIZE(rt305x_eth_resources), + .dev = { + .platform_data = &ramips_eth_data, + } +}; + +static struct resource rt305x_esw_resources[] = { + { + .start = RT305X_SWITCH_BASE, + .end = RT305X_SWITCH_BASE + PAGE_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct rt305x_esw_platform_data rt305x_esw_data = { + /* All ports are LAN ports. */ + .vlan_config = RT305X_ESW_VLAN_CONFIG_NONE, + .reg_initval_fct2 = 0x00d6500c, + /* + * ext phy base addr 31, enable port 5 polling, rx/tx clock skew 1, + * turbo mii off, rgmi 3.3v off + * port5: disabled + * port6: enabled, gige, full-duplex, rx/tx-flow-control + */ + .reg_initval_fpa2 = 0x3f502b28, +}; + +static struct platform_device rt305x_esw_device = { + .name = "rt305x-esw", + .resource = rt305x_esw_resources, + .num_resources = ARRAY_SIZE(rt305x_esw_resources), + .dev = { + .platform_data = &rt305x_esw_data, + } +}; + +void __init rt305x_register_ethernet(void) +{ + struct clk *clk; + + clk = clk_get(NULL, "sys"); + if (IS_ERR(clk)) + panic("unable to get SYS clock, err=%ld", PTR_ERR(clk)); + + ramips_eth_data.sys_freq = clk_get_rate(clk); + + platform_device_register(&rt305x_esw_device); + platform_device_register(&rt305x_eth_device); +} + +static struct resource rt305x_wifi_resources[] = { + { + .start = RT305X_WMAC_BASE, + .end = RT305X_WMAC_BASE + 0x3FFFF, + .flags = IORESOURCE_MEM, + }, { + .start = RT305X_CPU_IRQ_WNIC, + .end = RT305X_CPU_IRQ_WNIC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct rt2x00_platform_data rt305x_wifi_data; +static struct platform_device rt305x_wifi_device = { + .name = "rt2800_wmac", + .resource = rt305x_wifi_resources, + .num_resources = ARRAY_SIZE(rt305x_wifi_resources), + .dev = { + .platform_data = &rt305x_wifi_data, + } +}; + +void __init rt305x_register_wifi(void) +{ + u32 t; + + rt305x_wifi_data.eeprom_file_name = "soc_wmac.eeprom"; + + if (soc_is_rt3352() || soc_is_rt5350()) { + t = rt305x_sysc_rr(SYSC_REG_SYSTEM_CONFIG); + t &= RT3352_SYSCFG0_XTAL_SEL; + if (!t) + rt305x_wifi_data.clk_is_20mhz = 1; + } + platform_device_register(&rt305x_wifi_device); +} + +static struct resource rt305x_wdt_resources[] = { + { + .start = RT305X_TIMER_BASE, + .end = RT305X_TIMER_BASE + RT305X_TIMER_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device rt305x_wdt_device = { + .name = "ramips-wdt", + .id = -1, + .resource = rt305x_wdt_resources, + .num_resources = ARRAY_SIZE(rt305x_wdt_resources), +}; + +void __init rt305x_register_wdt(void) +{ + u32 t; + + /* enable WDT reset output on pin SRAM_CS_N */ + t = rt305x_sysc_rr(SYSC_REG_SYSTEM_CONFIG); + t |= RT305X_SYSCFG_SRAM_CS0_MODE_WDT << + RT305X_SYSCFG_SRAM_CS0_MODE_SHIFT; + rt305x_sysc_wr(t, SYSC_REG_SYSTEM_CONFIG); + + platform_device_register(&rt305x_wdt_device); +} + +static struct resource rt305x_spi_resources[] = { + { + .flags = IORESOURCE_MEM, + .start = RT305X_SPI_BASE, + .end = RT305X_SPI_BASE + RT305X_SPI_SIZE - 1, + }, +}; + +static struct platform_device rt305x_spi_device = { + .name = "ramips-spi", + .id = 0, + .resource = rt305x_spi_resources, + .num_resources = ARRAY_SIZE(rt305x_spi_resources), +}; + +void __init rt305x_register_spi(struct spi_board_info *info, int n) +{ + spi_register_board_info(info, n); + platform_device_register(&rt305x_spi_device); +} + +static struct resource rt305x_dwc_otg_resources[] = { + { + .start = RT305X_OTG_BASE, + .end = RT305X_OTG_BASE + 0x3FFFF, + .flags = IORESOURCE_MEM, + }, { + .start = RT305X_INTC_IRQ_OTG, + .end = RT305X_INTC_IRQ_OTG, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device rt305x_dwc_otg_device = { + .name = "dwc_otg", + .resource = rt305x_dwc_otg_resources, + .num_resources = ARRAY_SIZE(rt305x_dwc_otg_resources), + .dev = { + .platform_data = NULL, + } +}; + +static atomic_t rt3352_usb_pwr_ref = ATOMIC_INIT(0); + +static int rt3352_usb_power_on(struct platform_device *pdev) +{ + + if (atomic_inc_return(&rt3352_usb_pwr_ref) == 1) { + u32 t; + + t = rt305x_sysc_rr(RT3352_SYSC_REG_USB_PS); + + /* enable clock for port0's and port1's phys */ + t = rt305x_sysc_rr(RT3352_SYSC_REG_CLKCFG1); + t |= RT3352_CLKCFG1_UPHY0_CLK_EN | RT3352_CLKCFG1_UPHY1_CLK_EN; + rt305x_sysc_wr(t, RT3352_SYSC_REG_CLKCFG1); + mdelay(500); + + /* pull USBHOST and USBDEV out from reset */ + t = rt305x_sysc_rr(RT3352_SYSC_REG_RSTCTRL); + t &= ~(RT3352_RSTCTRL_UHST | RT3352_RSTCTRL_UDEV); + rt305x_sysc_wr(t, RT3352_SYSC_REG_RSTCTRL); + mdelay(500); + + /* enable host mode */ + t = rt305x_sysc_rr(RT3352_SYSC_REG_SYSCFG1); + t |= RT3352_SYSCFG1_USB0_HOST_MODE; + rt305x_sysc_wr(t, RT3352_SYSC_REG_SYSCFG1); + + t = rt305x_sysc_rr(RT3352_SYSC_REG_USB_PS); + } + + return 0; +} + +static void rt3352_usb_power_off(struct platform_device *pdev) +{ + + if (atomic_dec_return(&rt3352_usb_pwr_ref) == 0) { + u32 t; + + /* put USBHOST and USBDEV into reset */ + t = rt305x_sysc_rr(RT3352_SYSC_REG_RSTCTRL); + t |= RT3352_RSTCTRL_UHST | RT3352_RSTCTRL_UDEV; + rt305x_sysc_wr(t, RT3352_SYSC_REG_RSTCTRL); + udelay(10000); + + /* disable clock for port0's and port1's phys*/ + t = rt305x_sysc_rr(RT3352_SYSC_REG_CLKCFG1); + t &= ~(RT3352_CLKCFG1_UPHY0_CLK_EN | RT3352_CLKCFG1_UPHY1_CLK_EN); + rt305x_sysc_wr(t, RT3352_SYSC_REG_CLKCFG1); + udelay(10000); + } +} + +static struct usb_ehci_pdata rt3352_ehci_data = { + .power_on = rt3352_usb_power_on, + .power_off = rt3352_usb_power_off, +}; + +static struct resource rt3352_ehci_resources[] = { + { + .start = RT3352_EHCI_BASE, + .end = RT3352_EHCI_BASE + RT3352_EHCI_SIZE - 1, + .flags = IORESOURCE_MEM, + }, { + .start = RT305X_INTC_IRQ_OTG, + .end = RT305X_INTC_IRQ_OTG, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 rt3352_ehci_dmamask = DMA_BIT_MASK(32); +static struct platform_device rt3352_ehci_device = { + .name = "ehci-platform", + .id = -1, + .resource = rt3352_ehci_resources, + .num_resources = ARRAY_SIZE(rt3352_ehci_resources), + .dev = { + .dma_mask = &rt3352_ehci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &rt3352_ehci_data, + }, +}; + +static struct resource rt3352_ohci_resources[] = { + { + .start = RT3352_OHCI_BASE, + .end = RT3352_OHCI_BASE + RT3352_OHCI_SIZE - 1, + .flags = IORESOURCE_MEM, + }, { + .start = RT305X_INTC_IRQ_OTG, + .end = RT305X_INTC_IRQ_OTG, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct usb_ohci_pdata rt3352_ohci_data = { + .power_on = rt3352_usb_power_on, + .power_off = rt3352_usb_power_off, +}; + +static u64 rt3352_ohci_dmamask = DMA_BIT_MASK(32); +static struct platform_device rt3352_ohci_device = { + .name = "ohci-platform", + .id = -1, + .resource = rt3352_ohci_resources, + .num_resources = ARRAY_SIZE(rt3352_ohci_resources), + .dev = { + .dma_mask = &rt3352_ohci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &rt3352_ohci_data, + }, +}; + +void __init rt305x_register_usb(void) +{ + if (soc_is_rt305x() || soc_is_rt3350()) { + platform_device_register(&rt305x_dwc_otg_device); + } else if (soc_is_rt3352() || soc_is_rt5350()) { + platform_device_register(&rt3352_ehci_device); + platform_device_register(&rt3352_ohci_device); + } else { + BUG(); + } +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/devices.h b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/devices.h new file mode 100644 index 0000000000..22c9ce4232 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/devices.h @@ -0,0 +1,32 @@ +/* + * Ralink RT305x SoC specific platform device definitions + * + * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __RT305X_DEVICES_H +#define __RT305X_DEVICES_H + +#include <asm/mach-ralink/rt305x_esw_platform.h> + +struct physmap_flash_data; +struct spi_board_info; + +extern struct physmap_flash_data rt305x_flash0_data; +extern struct physmap_flash_data rt305x_flash1_data; + +extern struct rt305x_esw_platform_data rt305x_esw_data; + +void rt305x_register_flash(unsigned int id); +void rt305x_register_ethernet(void); +void rt305x_register_wifi(void); +void rt305x_register_wdt(void); +void rt305x_register_spi(struct spi_board_info *info, int n); +void rt305x_register_usb(void); + +#endif /* __RT305X_DEVICES_H */ + diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/early_printk.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/early_printk.c new file mode 100644 index 0000000000..602df863ef --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/early_printk.c @@ -0,0 +1,29 @@ +/* + * Ralink RT305x SoC early printk support + * + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/io.h> +#include <linux/serial_reg.h> + +#include <asm/addrspace.h> + +#include <asm/mach-ralink/rt305x_regs.h> + +#define UART_READ(r) \ + __raw_readl((void __iomem *)(KSEG1ADDR(RT305X_UART1_BASE) + 4 * (r))) + +#define UART_WRITE(r, v) \ + __raw_writel((v), (void __iomem *)(KSEG1ADDR(RT305X_UART1_BASE) + 4 * (r))) + +void prom_putchar(unsigned char ch) +{ + while (((UART_READ(UART_REG_LSR)) & UART_LSR_THRE) == 0); + UART_WRITE(UART_REG_TX, ch); + while (((UART_READ(UART_REG_LSR)) & UART_LSR_THRE) == 0); +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/irq.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/irq.c new file mode 100644 index 0000000000..fcac2dd860 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/irq.c @@ -0,0 +1,82 @@ +/* + * Ralink RT305x SoC specific interrupt handling + * + * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> + +#include <asm/irq_cpu.h> +#include <asm/mipsregs.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +static void rt305x_intc_irq_dispatch(void) +{ + u32 pending; + + pending = ramips_intc_get_status(); + + if (pending & RT305X_INTC_INT_TIMER0) + do_IRQ(RT305X_INTC_IRQ_TIMER0); + + else if (pending & RT305X_INTC_INT_TIMER1) + do_IRQ(RT305X_INTC_IRQ_TIMER1); + + else if (pending & RT305X_INTC_INT_UART0) + do_IRQ(RT305X_INTC_IRQ_UART0); + + else if (pending & RT305X_INTC_INT_UART1) + do_IRQ(RT305X_INTC_IRQ_UART1); + + else if (pending & RT305X_INTC_INT_PERFC) + do_IRQ(RT305X_INTC_IRQ_PERFC); + + else if (pending & RT305X_INTC_INT_OTG) + do_IRQ(RT305X_INTC_IRQ_OTG); + + /* TODO: handle PIO interrupts as well */ + + else + spurious_interrupt(); +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned long pending; + + pending = read_c0_status() & read_c0_cause() & ST0_IM; + + if (pending & STATUSF_IP7) + do_IRQ(RT305X_CPU_IRQ_COUNTER); + + else if (pending & STATUSF_IP5) + do_IRQ(RT305X_CPU_IRQ_FE); + + else if (pending & STATUSF_IP6) + do_IRQ(RT305X_CPU_IRQ_WNIC); + + else if (pending & STATUSF_IP2) + rt305x_intc_irq_dispatch(); + + else + spurious_interrupt(); +} + +void __init arch_init_irq(void) +{ + mips_cpu_irq_init(); + ramips_intc_irq_init(RT305X_INTC_BASE, RT305X_CPU_IRQ_INTC, + RT305X_INTC_IRQ_BASE); + + cp0_perfcount_irq = RT305X_INTC_IRQ_PERFC; +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-3g-6200n.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-3g-6200n.c new file mode 100644 index 0000000000..ade4fe9008 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-3g-6200n.c @@ -0,0 +1,86 @@ +/* + * Edimax 3g-6200n board support + * + * Copyright (C) 2011 Andrzej Hajda <andrzej.hajda@wp.pl> + * Copyright (C) 2012 Lukasz Golebiowski <lgolebio@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define EDIMAX_GPIO_BUTTON_WPS 12 +#define EDIMAX_GPIO_BTN_0 13 /* Wifi on/off switch button */ + +#define EDIMAX_GPIO_LED_POWER 9 +#define EDIMAX_GPIO_LED_WLAN 14 +#define EDIMAX_GPIO_LED_3G 7 + +#define EDIMAX_KEYS_POLL_INTERVAL 20 +#define EDIMAX_KEYS_DEBOUNCE_INTERVAL (3 * EDIMAX_KEYS_POLL_INTERVAL) + +static struct gpio_led edimax_leds_gpio[] __initdata = { + { + .name = "edimax:green:power", + .gpio = EDIMAX_GPIO_LED_POWER, + .active_low = 1, + }, { + .name = "edimax:amber:wlan", + .gpio = EDIMAX_GPIO_LED_WLAN, + .active_low = 1, + }, { + .name = "edimax:blue:3g", + .gpio = EDIMAX_GPIO_LED_3G, + .active_low = 1, + } +}; + +static struct gpio_keys_button edimax_gpio_buttons[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = EDIMAX_KEYS_DEBOUNCE_INTERVAL, + .gpio = EDIMAX_GPIO_BUTTON_WPS, + .active_low = 1, + }, { + .desc = "wlanswitch", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = EDIMAX_KEYS_DEBOUNCE_INTERVAL, + .gpio = EDIMAX_GPIO_BTN_0, + .active_low = 1, + } +}; + +static void __init edimax_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(edimax_leds_gpio), + edimax_leds_gpio); + ramips_register_gpio_buttons(-1, EDIMAX_KEYS_POLL_INTERVAL, + ARRAY_SIZE(edimax_gpio_buttons), + edimax_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_3G_6200N, "3G-6200N", "Edimax 3g-6200n", + edimax_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-3g300m.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-3g300m.c new file mode 100644 index 0000000000..e4993b303e --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-3g300m.c @@ -0,0 +1,126 @@ +/* + * Tenda 3G300M board support + * + * Copyright (C) 2013 Cezary Jackiewicz <cezary.jackiewicz@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/gpio.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define TENDA_3G300M_GPIO_BUTTON_RESET 0 +#define TENDA_3G300M_GPIO_BUTTON_MODE 10 + +#define TENDA_3G300M_GPIO_LED_3GROUTER 11 +#define TENDA_3G300M_GPIO_LED_AP 12 +#define TENDA_3G300M_GPIO_LED_WISPROUTER 9 +#define TENDA_3G300M_GPIO_LED_WIRELESSROUTER 13 +#define TENDA_3G300M_GPIO_LED_3G 7 +#define TENDA_3G300M_GPIO_LED_WPSRESET 14 + +#define TENDA_3G300M_KEYS_POLL_INTERVAL 20 +#define TENDA_3G300M_KEYS_DEBOUNCE_INTERVAL (3 * TENDA_3G300M_KEYS_POLL_INTERVAL) + +const struct flash_platform_data tenda_3g300m_flash = { + .type = "mx25l3205d", +}; + +struct spi_board_info tenda_3g300m_spi_slave_info[] __initdata = { + { + .modalias = "m25p80", + .platform_data = &tenda_3g300m_flash, + .irq = -1, + .max_speed_hz = 10000000, + .bus_num = 0, + .chip_select = 0, + } +}; + +static struct gpio_led tenda_3g300m_leds_gpio[] __initdata = { + { + .name = "tenda:blue:3grouter", + .gpio = TENDA_3G300M_GPIO_LED_3GROUTER, + .active_low = 1, + },{ + .name = "tenda:blue:ap", + .gpio = TENDA_3G300M_GPIO_LED_AP, + .active_low = 1, + },{ + .name = "tenda:blue:wisprouter", + .gpio = TENDA_3G300M_GPIO_LED_WISPROUTER, + .active_low = 1, + },{ + .name = "tenda:blue:wirelessrouter", + .gpio = TENDA_3G300M_GPIO_LED_WIRELESSROUTER, + .active_low = 1, + },{ + .name = "tenda:blue:3g", + .gpio = TENDA_3G300M_GPIO_LED_3G, + .active_low = 1, + },{ + .name = "tenda:blue:wpsreset", + .gpio = TENDA_3G300M_GPIO_LED_WPSRESET, + .active_low = 1, + } +}; + +static struct gpio_keys_button tenda_3g300m_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TENDA_3G300M_KEYS_DEBOUNCE_INTERVAL, + .gpio = TENDA_3G300M_GPIO_BUTTON_RESET, + .active_low = 1, + },{ + .desc = "mode", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = TENDA_3G300M_KEYS_DEBOUNCE_INTERVAL, + .gpio = TENDA_3G300M_GPIO_BUTTON_MODE, + .active_low = 1, + } +}; + +static void __init tenda_3g300m_init(void) +{ + rt305x_gpio_init((RT305X_GPIO_MODE_GPIO << + RT305X_GPIO_MODE_UART0_SHIFT) | + RT305X_GPIO_MODE_JTAG); + + rt305x_register_spi(tenda_3g300m_spi_slave_info, + ARRAY_SIZE(tenda_3g300m_spi_slave_info)); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(tenda_3g300m_leds_gpio), + tenda_3g300m_leds_gpio); + + ramips_register_gpio_buttons(-1, TENDA_3G300M_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tenda_3g300m_gpio_buttons), + tenda_3g300m_gpio_buttons); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + + rt305x_register_wifi(); + + rt305x_register_wdt(); + + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_3G300M, "3G300M", "Tenda 3G300M", + tenda_3g300m_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-air3gii.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-air3gii.c new file mode 100644 index 0000000000..aca238abe1 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-air3gii.c @@ -0,0 +1,94 @@ +/* + * AirLive Air3GII board support + * + * Copyright (C) 2012 Cezary Jackiewicz <cezary.jackiewicz@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define AIR3GII_GPIO_BUTTON_WPS 7 + +#define AIR3GII_GPIO_LED_WLAN 8 +#define AIR3GII_GPIO_LED_MOBILE 9 + +#define AIR3GII_KEYS_POLL_INTERVAL 20 +#define AIR3GII_KEYS_DEBOUNCE_INTERVAL (3 * AIR3GII_KEYS_POLL_INTERVAL) + +const struct flash_platform_data air3gii_flash = { + .type = "en25q32b", +}; + +struct spi_board_info air3gii_spi_slave_info[] __initdata = { + { + .modalias = "m25p80", + .platform_data = &air3gii_flash, + .irq = -1, + .max_speed_hz = 10000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static struct gpio_led air3gii_leds_gpio[] __initdata = { + { + .name = "airlive:green:wlan", + .gpio = AIR3GII_GPIO_LED_WLAN, + .active_low = 0, + }, { + .name = "airlive:green:mobile", + .gpio = AIR3GII_GPIO_LED_MOBILE, + .active_low = 1, + } +}; + +static struct gpio_keys_button air3gii_gpio_buttons[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = AIR3GII_KEYS_DEBOUNCE_INTERVAL, + .gpio = AIR3GII_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static void __init air3gii_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_spi(air3gii_spi_slave_info, + ARRAY_SIZE(air3gii_spi_slave_info)); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(air3gii_leds_gpio), + air3gii_leds_gpio); + + ramips_register_gpio_buttons(-1, AIR3GII_KEYS_POLL_INTERVAL, + ARRAY_SIZE(air3gii_gpio_buttons), + air3gii_gpio_buttons); + + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_AIR3GII, "AIR3GII", "AirLive Air3GII", + air3gii_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-all0256n.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-all0256n.c new file mode 100644 index 0000000000..7f5e00b418 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-all0256n.c @@ -0,0 +1,90 @@ +/* + * Allnet ALL0256N board support + * + * Copyright (C) 2012 Daniel Golle <dgolle@allnet.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define ALL0256N_GPIO_BUTTON_RESET 0 +#define ALL0256N_GPIO_LED_RSSI_LOW 14 +#define ALL0256N_GPIO_LED_RSSI_MED 12 +#define ALL0256N_GPIO_LED_RSSI_HIGH 13 +#define ALL0256N_KEYS_POLL_INTERVAL 20 +#define ALL0256N_KEYS_DEBOUNCE_INTERVAL (3 * ALL0256N_KEYS_POLL_INTERVAL) + +const struct flash_platform_data all0256n_flash = { + .type = "mx25l3205d", +}; + +struct spi_board_info all0256n_spi_slave_info[] __initdata = { + { + .modalias = "m25p80", + .platform_data = &all0256n_flash, + .irq = -1, + .max_speed_hz = 10000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static struct gpio_keys_button all0256n_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = ALL0256N_KEYS_DEBOUNCE_INTERVAL, + .gpio = ALL0256N_GPIO_BUTTON_RESET, + .active_low = 1, + } +}; + +static struct gpio_led all0256n_leds_gpio[] __initdata = { + { + .name = "all0256n:green:rssilow", + .gpio = ALL0256N_GPIO_LED_RSSI_LOW, + .active_low = 1, + }, { + .name = "all0256n:green:rssimed", + .gpio = ALL0256N_GPIO_LED_RSSI_MED, + .active_low = 1, + }, { + .name = "all0256n:green:rssihigh", + .gpio = ALL0256N_GPIO_LED_RSSI_HIGH, + .active_low = 1, + } +}; + +static void __init all0256n_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + rt305x_register_spi(all0256n_spi_slave_info, + ARRAY_SIZE(all0256n_spi_slave_info)); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(all0256n_leds_gpio), + all0256n_leds_gpio); + ramips_register_gpio_buttons(-1, ALL0256N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(all0256n_gpio_buttons), + all0256n_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_ALL0256N, "ALL0256N", "Allnet ALL0256N", + all0256n_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-all5002.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-all5002.c new file mode 100644 index 0000000000..71938f028c --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-all5002.c @@ -0,0 +1,61 @@ +/* + * Allnet ALL5002 + * + * Copyright (C) 2012 Daniel Golle <dgolle@allnet.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +// #define ALL5002_GPIO_BUTTON_RESET 0 +// #define ALL5002_GPIO_LED_RSSI_LOW 14 +// #define ALL5002_GPIO_LED_RSSI_MED 12 +// #define ALL5002_GPIO_LED_RSSI_HIGH 13 +// #define ALL5002_BUTTONS_POLL_INTERVAL 20 + +const struct flash_platform_data all5002_flash = { + .type = "mx25l25635e", +}; + +struct spi_board_info all5002_spi_slave_info[] __initdata = { + { + .modalias = "m25p80", + .platform_data = &all5002_flash, + .irq = -1, + .max_speed_hz = 10000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static void __init all5002_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + rt305x_register_spi(all5002_spi_slave_info, + ARRAY_SIZE(all5002_spi_slave_info)); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE; + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_ALL5002, "ALL5002", "Allnet ALL5002/ALL5003", + all5002_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-argus-atp52b.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-argus-atp52b.c new file mode 100644 index 0000000000..b683485d71 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-argus-atp52b.c @@ -0,0 +1,81 @@ +/* + * Argus ATP-52B router support + * http://www.argus-co.com/english/productsview.php?id=70&cid=81 + * + * Copyright (C) 2011 Roman Yeryomin <roman@advem.lv> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define ARGUS_ATP52B_GPIO_LED_RUN 9 +#define ARGUS_ATP52B_GPIO_LED_NET 13 +#define ARGUS_ATP52B_GPIO_BUTTON_WPS 0 +#define ARGUS_ATP52B_GPIO_BUTTON_RESET 10 +#define ARGUS_ATP52B_KEYS_POLL_INTERVAL 20 +#define ARGUS_ATP52B_KEYS_DEBOUNCE_INTERVAL (3 * ARGUS_ATP52B_KEYS_POLL_INTERVAL) + +static struct gpio_led argus_atp52b_leds_gpio[] __initdata = { + { + .name = "argus-atp52b:green:run", + .gpio = ARGUS_ATP52B_GPIO_LED_RUN, + .active_low = 1, + }, + { + .name = "argus-atp52b:amber:net", + .gpio = ARGUS_ATP52B_GPIO_LED_NET, + .active_low = 1, + } +}; + +static struct gpio_keys_button argus_atp52b_gpio_buttons[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = ARGUS_ATP52B_KEYS_DEBOUNCE_INTERVAL, + .gpio = ARGUS_ATP52B_GPIO_BUTTON_WPS, + .active_low = 1, + }, + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = ARGUS_ATP52B_KEYS_DEBOUNCE_INTERVAL, + .gpio = ARGUS_ATP52B_GPIO_BUTTON_RESET, + .active_low = 1, + } +}; + +static void __init argus_atp52b_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(argus_atp52b_leds_gpio), + argus_atp52b_leds_gpio); + ramips_register_gpio_buttons(-1, ARGUS_ATP52B_KEYS_POLL_INTERVAL, + ARRAY_SIZE(argus_atp52b_gpio_buttons), + argus_atp52b_gpio_buttons); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_ARGUS_ATP52B, "ARGUS_ATP52B", "Argus ATP-52B", + argus_atp52b_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-bc2.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-bc2.c new file mode 100644 index 0000000000..7a21488511 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-bc2.c @@ -0,0 +1,70 @@ +/* + * NexAira BC2 board support + * + * Copyright (C) 2011 Adam J. Porter <porter.adam@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define BC2_GPIO_BUTTON_RESET 17 +#define BC2_GPIO_LED_USB 20 + +#define BC2_KEYS_POLL_INTERVAL 20 +#define BC2_KEYS_DEBOUNCE_INTERVAL (3 * BC2_KEYS_POLL_INTERVAL) + +static struct gpio_led bc2_leds_gpio[] __initdata = { + { + .name = "bc2:blue:usb", + .gpio = BC2_GPIO_LED_USB, + .active_low = 1, + } +}; + +static struct gpio_keys_button bc2_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = BC2_KEYS_DEBOUNCE_INTERVAL, + .gpio = BC2_GPIO_BUTTON_RESET, + .active_low = 1, + } +}; + +static void __init bc2_init(void) +{ + rt305x_gpio_init((RT305X_GPIO_MODE_GPIO << + RT305X_GPIO_MODE_UART0_SHIFT) | + RT305X_GPIO_MODE_JTAG); + + rt305x_register_flash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(bc2_leds_gpio), + bc2_leds_gpio); + + ramips_register_gpio_buttons(-1, BC2_KEYS_POLL_INTERVAL, + ARRAY_SIZE(bc2_gpio_buttons), + bc2_gpio_buttons); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_BC2, "BC2", "NexAira BC2", + bc2_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-br6425.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-br6425.c new file mode 100644 index 0000000000..3a24516496 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-br6425.c @@ -0,0 +1,78 @@ +/* + * Edimax BR-6425 board support + * + * Copyright (C) 2012 OpenWrt.org + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define BR6425_GPIO_LED_POWER 9 +#define BR6425_GPIO_BUTTON_RESET 12 +#define BR6425_GPIO_SWITCH_RFKILL 13 +#define BR6425_GPIO_LED_WLAN 14 +#define BR6425_KEYS_POLL_INTERVAL 20 +#define BR6425_KEYS_DEBOUNCE_INTERVAL (3 * BR6425_KEYS_POLL_INTERVAL) + +static struct gpio_keys_button br6425_gpio_buttons[] __initdata = { + { + .desc = "reset_wps", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = BR6425_KEYS_DEBOUNCE_INTERVAL, + .gpio = BR6425_GPIO_BUTTON_RESET, + .active_low = 1, + }, + { + .desc = "RFKILL switch", + .type = EV_SW, + .code = KEY_RFKILL, + .debounce_interval = BR6425_KEYS_DEBOUNCE_INTERVAL, + .gpio = BR6425_GPIO_SWITCH_RFKILL, + .active_low = 1, + }, +}; + +static struct gpio_led br6425_leds_gpio[] __initdata = { + { + .name = "edimax:green:power", + .gpio = BR6425_GPIO_LED_POWER, + .active_low = 1, + }, { + .name = "edimax:orange:wlan", + .gpio = BR6425_GPIO_LED_WLAN, + .active_low = 1, + }, +}; + +static void __init br6425_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + rt305x_register_flash(0); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(br6425_leds_gpio), + br6425_leds_gpio); + ramips_register_gpio_buttons(-1, BR6425_KEYS_POLL_INTERVAL, + ARRAY_SIZE(br6425_gpio_buttons), + br6425_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_BR6425, "BR-6425", "Edimax BR-6425", + br6425_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-broadway.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-broadway.c new file mode 100644 index 0000000000..74dfaa30b0 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-broadway.c @@ -0,0 +1,87 @@ +/* + * Hauppauge/PCTV Broadway Support + * + * Copyright (C) 2012 Devin Heitmueller <dheitmueller@kernellabs.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define BROADWAY_GPIO_LED_DISKMOUNT 9 +#define BROADWAY_GPIO_LED_WPS 14 + +#define BROADWAY_GPIO_BUTTON_WPS 0 +#define BROADWAY_GPIO_BUTTON_FACTORYRESET 13 + +#define BROADWAY_KEYS_POLL_INTERVAL 20 +#define BROADWAY_KEYS_DEBOUNCE_INTERVAL (3 * BROADWAY_KEYS_POLL_INTERVAL) + +static struct gpio_led broadway_leds_gpio[] __initdata = { + { + .name = "red:diskmounted", + .gpio = BROADWAY_GPIO_LED_DISKMOUNT, + .active_low = 1, + }, + { + .name = "red:wps_active", + .gpio = BROADWAY_GPIO_LED_WPS, + .active_low = 1, + }, +}; + +static struct gpio_keys_button broadway_gpio_buttons[] __initdata = { + { + .desc = "Factory Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = BROADWAY_KEYS_DEBOUNCE_INTERVAL, + .gpio = BROADWAY_GPIO_BUTTON_FACTORYRESET, + .active_low = 1, + }, +#ifdef DJH_WPS_BUTTON_NOT_WIRED_TO_GPIO + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = BROADWAY_KEYS_DEBOUNCE_INTERVAL, + .gpio = BROADWAY_GPIO_BUTTON_WPS, + .active_low = 1, + }, +#endif +}; + +static void __init broadway_init(void) +{ + rt305x_gpio_init((RT305X_GPIO_MODE_GPIO << + RT305X_GPIO_MODE_UART0_SHIFT)); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(broadway_leds_gpio), + broadway_leds_gpio); + ramips_register_gpio_buttons(-1, BROADWAY_KEYS_POLL_INTERVAL, + ARRAY_SIZE(broadway_gpio_buttons), + broadway_gpio_buttons); + + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_BROADWAY, "BROADWAY", "Hauppauge Broadway", + broadway_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-carambola.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-carambola.c new file mode 100644 index 0000000000..c24527a7ba --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-carambola.c @@ -0,0 +1,42 @@ +/* + * 8devices Carambola dev board support + * + * Copyright (C) 2012 Tobias Diedrich <ranma+openwrt@tdiedrich.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +static void __init carambola_init(void) +{ + /* Ugh, inverted logic... + * This actually puts the pins into GPIO mode rather I2C, SPI, ... */ + rt305x_gpio_init(RT305X_GPIO_MODE_UART0(RT305X_GPIO_MODE_GPIO) | + RT305X_GPIO_MODE_I2C | + RT305X_GPIO_MODE_SPI | + RT305X_GPIO_MODE_JTAG | + RT305X_GPIO_MODE_MDIO); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE; + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_CARAMBOLA, "CARAMBOLA", "8devices Carambola", + carambola_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dap-1350.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dap-1350.c new file mode 100644 index 0000000000..17a49aac5a --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dap-1350.c @@ -0,0 +1,95 @@ +/* + * D-Link DAP-1350 board support + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define DAP_1350_GPIO_LED_POWER_BLUE 8 +#define DAP_1350_GPIO_LED_POWER_RED 9 +#define DAP_1350_GPIO_LED_WPS 14 + +#define DAP_1350_GPIO_BUTTON_WPS 0 /* active low */ +#define DAP_1350_GPIO_BUTTON_RESET 10 /* active low */ +#define DAP_1350_GPIO_SWITCH_MODE_AP 7 /* active low */ +#define DAP_1350_GPIO_SWITCH_MODE_RT 11 /* active low */ + +#define DAP_1350_KEYS_POLL_INTERVAL 20 +#define DAP_1350_KEYS_DEBOUNCE_INTERVAL (3 * DAP_1350_KEYS_POLL_INTERVAL) + +static struct gpio_led dap_1350_leds_gpio[] __initdata = { + { + .name = "d-link:blue:power", + .gpio = DAP_1350_GPIO_LED_POWER_BLUE, + .active_low = 1, + }, { + .name = "d-link:red:power", + .gpio = DAP_1350_GPIO_LED_POWER_RED, + .active_low = 1, + }, { + .name = "d-link:blue:wps", + .gpio = DAP_1350_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button dap_1350_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DAP_1350_KEYS_DEBOUNCE_INTERVAL, + .gpio = DAP_1350_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DAP_1350_KEYS_DEBOUNCE_INTERVAL, + .gpio = DAP_1350_GPIO_BUTTON_WPS, + .active_low = 1, + }, { + .desc = "rt", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = DAP_1350_KEYS_DEBOUNCE_INTERVAL, + .gpio = DAP_1350_GPIO_SWITCH_MODE_RT, + .active_low = 1, + }, { + .desc = "ap", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = DAP_1350_KEYS_DEBOUNCE_INTERVAL, + .gpio = DAP_1350_GPIO_SWITCH_MODE_AP, + .active_low = 1, + } +}; + +static void __init dap_1350_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(dap_1350_leds_gpio), + dap_1350_leds_gpio); + ramips_register_gpio_buttons(-1, DAP_1350_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dap_1350_gpio_buttons), + dap_1350_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_DAP_1350, "DAP-1350", "D-Link DAP-1350", + dap_1350_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dir-300-revb.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dir-300-revb.c new file mode 100644 index 0000000000..3ae1b7852c --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dir-300-revb.c @@ -0,0 +1,155 @@ +/* + * D-Link DIR-300 rev B board support + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define DIR_300B_GPIO_LED_STATUS_AMBER 8 +#define DIR_300B_GPIO_LED_STATUS_GREEN 9 +#define DIR_300B_GPIO_LED_WPS 13 +/* + * NOTE: The wan led is also connected to the switch, both + * switch and gpio must be active to make it light up + */ +#define DIR_300B_GPIO_LED_WAN_GREEN 12 +#define DIR_300B_GPIO_LED_WAN_AMBER 14 + +/* + * NOTE: the WPS led in DIR-620 consists of two antiparallel leds, + * so they can't be lit simultaneously + */ +#define DIR_620_GPIO_LED_WPS_AMBER 11 + +#define DIR_300B_GPIO_BUTTON_WPS 0 /* active low */ +#define DIR_300B_GPIO_BUTTON_RESET 10 /* active low */ + +#define DIR_300B_KEYS_POLL_INTERVAL 20 +#define DIR_300B_KEYS_DEBOUNCE_INTERVAL (3 * DIR_300B_KEYS_POLL_INTERVAL) + +static struct gpio_led dir_300b_leds_gpio[] __initdata = { + { + .name = "d-link:amber:status", + .gpio = DIR_300B_GPIO_LED_STATUS_AMBER, + .active_low = 1, + }, { + .name = "d-link:green:status", + .gpio = DIR_300B_GPIO_LED_STATUS_GREEN, + .active_low = 1, + }, { + .name = "d-link:amber:wan", + .gpio = DIR_300B_GPIO_LED_WAN_AMBER, + .active_low = 1, + }, { + .name = "d-link:green:wan", + .gpio = DIR_300B_GPIO_LED_WAN_GREEN, + .active_low = 1, + }, { + .name = "d-link:blue:wps", + .gpio = DIR_300B_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button dir_300b_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DIR_300B_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_300B_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DIR_300B_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_300B_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static struct gpio_led dir_620_leds_gpio[] __initdata = { + { + .name = "d-link:amber:status", + .gpio = DIR_300B_GPIO_LED_STATUS_AMBER, + .active_low = 1, + }, { + .name = "d-link:green:status", + .gpio = DIR_300B_GPIO_LED_STATUS_GREEN, + .active_low = 1, + }, { + .name = "d-link:amber:wan", + .gpio = DIR_300B_GPIO_LED_WAN_AMBER, + .active_low = 1, + }, { + .name = "d-link:green:wan", + .gpio = DIR_300B_GPIO_LED_WAN_GREEN, + .active_low = 1, + }, { + .name = "d-link:blue:wps", + .gpio = DIR_300B_GPIO_LED_WPS, + }, { + .name = "d-link:amber:wps", + .gpio = DIR_620_GPIO_LED_WPS_AMBER, + } +}; + +static void __init dir_common_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_buttons(-1, DIR_300B_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dir_300b_gpio_buttons), + dir_300b_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +static void __init dir_300b_init(void) +{ + dir_common_init(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_300b_leds_gpio), + dir_300b_leds_gpio); +} + +static void __init dir_620a1_init(void) +{ + dir_common_init(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_620_leds_gpio), + dir_620_leds_gpio); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_DIR_300_B1, "DIR-300-B1", "D-Link DIR-300 B1", + dir_300b_init); + +MIPS_MACHINE(RAMIPS_MACH_DIR_600_B1, "DIR-600-B1", "D-Link DIR-600 B1", + dir_300b_init); + +MIPS_MACHINE(RAMIPS_MACH_DIR_600_B2, "DIR-600-B2", "D-Link DIR-600 B2", + dir_300b_init); + +MIPS_MACHINE(RAMIPS_MACH_DIR_615_D, "DIR-615-D", "D-Link DIR-615 D", + dir_300b_init); + +MIPS_MACHINE(RAMIPS_MACH_DIR_620_A1, "DIR-620-A1", "D-Link DIR-620 A1", + dir_620a1_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dir-615-h1.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dir-615-h1.c new file mode 100644 index 0000000000..dbfe4aa92f --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-dir-615-h1.c @@ -0,0 +1,112 @@ +/* + * D-Link DIR-615 H1 + * + * Copyright (C) 2012 Mikko Hissa <mikko.hissa@uta.fi> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define DIR_615_H1_GPIO_LED_WAN_AMBER 12 /* active low */ +#define DIR_615_H1_GPIO_LED_WAN_GREEN 13 /* active low */ +#define DIR_615_H1_GPIO_LED_WPS_BLUE 14 /* active low */ + +#define DIR_615_H1_GPIO_LED_STATUS_AMBER 7 +#define DIR_615_H1_GPIO_LED_STATUS_GREEN 9 + +#define DIR_615_H1_GPIO_BUTTON_RESET 10 /* active low */ +#define DIR_615_H1_GPIO_BUTTON_WPS 0 /* active low */ + +#define DIR_615_H1_KEYS_POLL_INTERVAL 20 +#define DIR_615_H1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615_H1_KEYS_POLL_INTERVAL) + +static struct gpio_led dir_615_h1_leds_gpio[] __initdata = { + { + .name = "d-link:amber:status", + .gpio = DIR_615_H1_GPIO_LED_STATUS_AMBER, + }, { + .name = "d-link:green:status", + .gpio = DIR_615_H1_GPIO_LED_STATUS_GREEN, + }, { + .name = "d-link:amber:wan", + .gpio = DIR_615_H1_GPIO_LED_WAN_AMBER, + .active_low = 1, + }, { + .name = "d-link:green:wan", + .gpio = DIR_615_H1_GPIO_LED_WAN_GREEN, + .active_low = 1, + }, { + .name = "d-link:blue:wps", + .gpio = DIR_615_H1_GPIO_LED_WPS_BLUE, + .active_low = 1, + } +}; + +static struct gpio_keys_button dir_615_h1_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DIR_615_H1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_615_H1_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DIR_615_H1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_615_H1_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +const struct flash_platform_data dir615h1_flash = { + .type = "mx25l3205d", +}; + +struct spi_board_info dir615h1_spi_slave_info[] __initdata = { + { + .modalias = "m25p80", + .platform_data = &dir615h1_flash, + .irq = -1, + .max_speed_hz = 10000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static void __init dir615h1_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + rt305x_register_spi(dir615h1_spi_slave_info, + ARRAY_SIZE(dir615h1_spi_slave_info)); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_615_h1_leds_gpio), + dir_615_h1_leds_gpio); + ramips_register_gpio_buttons(-1, DIR_615_H1_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dir_615_h1_gpio_buttons), + dir_615_h1_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_DIR_615_H1, "DIR-615-H1", "D-Link DIR-615 H1", + dir615h1_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-esr-9753.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-esr-9753.c new file mode 100644 index 0000000000..d5f65df5ec --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-esr-9753.c @@ -0,0 +1,81 @@ +/* + * Senao / EnGenius ESR-9753 board support + * + * Copyright (C) 2011 Artur Wronowski <arteqw@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define ESR_9753_GPIO_LED_POWER 8 +#define ESR_9753_GPIO_LED_WPS 14 + +#define ESR_9753_GPIO_BUTTON_WPS 0 /* active low */ +#define ESR_9753_GPIO_BUTTON_RESET 10 /* active low */ + +#define ESR_9753_KEYS_POLL_INTERVAL 20 +#define ESR_9753_KEYS_DEBOUNCE_INTERVAL (3 * ESR_9753_KEYS_POLL_INTERVAL) + +static struct gpio_led esr_9753_leds_gpio[] __initdata = { + { + .name = "esr-9753:orange:power", + .gpio = ESR_9753_GPIO_LED_POWER, + .active_low = 1, + }, { + .name = "esr-9753:orange:wps", + .gpio = ESR_9753_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button esr_9753_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = ESR_9753_KEYS_DEBOUNCE_INTERVAL, + .gpio = ESR_9753_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = ESR_9753_KEYS_DEBOUNCE_INTERVAL, + .gpio = ESR_9753_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static void __init esr_9753_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(esr_9753_leds_gpio), + esr_9753_leds_gpio); + + ramips_register_gpio_buttons(-1, ESR_9753_KEYS_POLL_INTERVAL, + ARRAY_SIZE(esr_9753_gpio_buttons), + esr_9753_gpio_buttons); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_ESR_9753, "ESR-9753", "Senao / EnGenius ESR-9753", + esr_9753_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-f5d8235-v2.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-f5d8235-v2.c new file mode 100644 index 0000000000..073fc75a6e --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-f5d8235-v2.c @@ -0,0 +1,108 @@ +/* + * Belkin F5D8235 v2 board support + * + * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <linux/rtl8366.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define F5D8235_V2_GPIO_LED_INTERNET_BLUE 5 +#define F5D8235_V2_GPIO_LED_INTERNET_AMBER 6 +#define F5D8235_V2_GPIO_LED_MODEM_BLUE 11 +#define F5D8235_V2_GPIO_LED_MODEM_AMBER 8 +#define F5D8235_V2_GPIO_LED_ROUTER 9 +#define F5D8235_V2_GPIO_LED_STORAGE_BLUE 23 +#define F5D8235_V2_GPIO_LED_STORAGE_AMBER 22 +#define F5D8235_V2_GPIO_LED_SECURITY_BLUE 13 +#define F5D8235_V2_GPIO_LED_SECURITY_AMBER 12 + +static struct gpio_led f5d8235v2_leds_gpio[] __initdata = { + { + .name = "f5d8235v2:blue:internet", + .gpio = F5D8235_V2_GPIO_LED_INTERNET_BLUE, + .active_low = 1, + }, { + .name = "f5d8235v2:amber:internet", + .gpio = F5D8235_V2_GPIO_LED_INTERNET_AMBER, + .active_low = 1, + }, { + .name = "f5d8235v2:blue:modem", + .gpio = F5D8235_V2_GPIO_LED_MODEM_BLUE, + .active_low = 1, + }, { + .name = "f5d8235v2:amber:modem", + .gpio = F5D8235_V2_GPIO_LED_MODEM_AMBER, + .active_low = 1, + }, { + .name = "f5d8235v2:blue:router", + .gpio = F5D8235_V2_GPIO_LED_ROUTER, + .active_low = 1, + }, { + .name = "f5d8235v2:blue:storage", + .gpio = F5D8235_V2_GPIO_LED_STORAGE_BLUE, + .active_low = 1, + }, { + .name = "f5d8235v2:amber:storage", + .gpio = F5D8235_V2_GPIO_LED_STORAGE_AMBER, + .active_low = 1, + }, { + .name = "f5d8235v2:blue:security", + .gpio = F5D8235_V2_GPIO_LED_SECURITY_BLUE, + .active_low = 1, + }, { + .name = "f5d8235v2:amber:security", + .gpio = F5D8235_V2_GPIO_LED_SECURITY_AMBER, + .active_low = 1, + } +}; + +static struct rtl8366_platform_data f5d8235v2_switch_data = { + .gpio_sda = RT305X_GPIO_I2C_SD, + .gpio_sck = RT305X_GPIO_I2C_SCLK, +}; + +static struct platform_device f5d8235v2_switch = { + .name = RTL8366RB_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &f5d8235v2_switch_data, + } +}; + +static void __init f5d8235v2_init(void) +{ + rt305x_gpio_init((RT305X_GPIO_MODE_GPIO << + RT305X_GPIO_MODE_UART0_SHIFT) | + RT305X_GPIO_MODE_I2C | + RT305X_GPIO_MODE_SPI | + RT305X_GPIO_MODE_MDIO); + + rt305x_register_flash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(f5d8235v2_leds_gpio), + f5d8235v2_leds_gpio); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE; + rt305x_register_ethernet(); + platform_device_register(&f5d8235v2_switch); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_F5D8235_V2, "F5D8235_V2", "Belkin F5D8235 v2", + f5d8235v2_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-fonera20n.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-fonera20n.c new file mode 100644 index 0000000000..a433e40e91 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-fonera20n.c @@ -0,0 +1,87 @@ +/* + * La Fonera20N board support + * + * Copyright (C) 2009 John Crispin <blogic@openwrt.org> + * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define FONERA20N_GPIO_BUTTON_RESET 12 +#define FONERA20N_GPIO_SWITCH 13 +#define FONERA20N_GPIO_LED_WIFI 7 +#define FONERA20N_GPIO_LED_POWER 9 +#define FONERA20N_GPIO_LED_USB 14 + +#define FONERA20N_KEYS_POLL_INTERVAL 20 +#define FONERA20N_KEYS_DEBOUNCE_INTERVAL (3 * FONERA20N_KEYS_POLL_INTERVAL) + +static struct gpio_led fonera20n_leds_gpio[] __initdata = { + { + .name = "fonera20n:orange:wifi", + .gpio = FONERA20N_GPIO_LED_WIFI, + .active_low = 1, + }, { + .name = "fonera20n:green:power", + .gpio = FONERA20N_GPIO_LED_POWER, + .active_low = 1, + }, { + .name = "fonera20n:orange:usb", + .gpio = FONERA20N_GPIO_LED_USB, + .active_low = 1, + } +}; + +static struct gpio_keys_button fonera20n_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = FONERA20N_KEYS_DEBOUNCE_INTERVAL, + .gpio = FONERA20N_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "switch", + .type = EV_KEY, + .code = BTN_1, + .debounce_interval = FONERA20N_KEYS_DEBOUNCE_INTERVAL, + .gpio = FONERA20N_GPIO_SWITCH, + .active_low = 1, + } +}; + +static void __init fonera20n_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(fonera20n_leds_gpio), + fonera20n_leds_gpio); + + ramips_register_gpio_buttons(-1, FONERA20N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(fonera20n_gpio_buttons), + fonera20n_gpio_buttons); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_FONERA20N, "FONERA20N", "La Fonera 2.0N", + fonera20n_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-freestation5.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-freestation5.c new file mode 100644 index 0000000000..b868244cca --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-freestation5.c @@ -0,0 +1,34 @@ +/* + * ARC FreeStation2/5 board support + * + * Copyright (C) 2009 John Crispin <blogic@openwrt.org> + * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2012 Pau Escrich <p4u@dabax.net> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +static void __init freestation5_init(void) +{ + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_FREESTATION5, "FREESTATION5", "ARC FreeStation5", + freestation5_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-hw550-3g.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-hw550-3g.c new file mode 100644 index 0000000000..b274b917da --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-hw550-3g.c @@ -0,0 +1,105 @@ +/* + * Aztech HW550-3G board support + * + * Copyright (C) 2011 Layne Edwards <ledwards76@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define HW550_3G_GPIO_LED_USB 8 +#define HW550_3G_GPIO_LED_3G 11 +#define HW550_3G_GPIO_LED_STATUS 12 +#define HW550_3G_GPIO_LED_WPS 14 + +#define HW550_3G_GPIO_BUTTON_RESET 10 +#define HW550_3G_GPIO_BUTTON_CONNECT 7 +#define HW550_3G_GPIO_BUTTON_WPS 0 + +#define HW550_3G_KEYS_POLL_INTERVAL 20 +#define HW550_3G_KEYS_DEBOUNCE_INTERVAL (3 * HW550_3G_KEYS_POLL_INTERVAL) + +static struct gpio_led hw550_3g_leds_gpio[] __initdata = { + { + .name = "hw550-3g:green:usb", + .gpio = HW550_3G_GPIO_LED_USB, + .active_low = 1, + }, { + .name = "hw550-3g:green:3g", + .gpio = HW550_3G_GPIO_LED_3G, + .active_low = 1, + }, { + .name = "hw550-3g:green:status", + .gpio = HW550_3G_GPIO_LED_STATUS, + .active_low = 1, + }, { + .name = "hw550-3g:green:wps", + .gpio = HW550_3G_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button hw550_3g_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = HW550_3G_KEYS_DEBOUNCE_INTERVAL, + .gpio = HW550_3G_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "connect", + .type = EV_KEY, + .code = KEY_CONNECT, + .debounce_interval = HW550_3G_KEYS_DEBOUNCE_INTERVAL, + .gpio = HW550_3G_GPIO_BUTTON_CONNECT, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = HW550_3G_KEYS_DEBOUNCE_INTERVAL, + .gpio = HW550_3G_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +#define HW550_3G_GPIO_MODE \ + ((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \ + RT305X_GPIO_MODE_MDIO) + +static void __init hw550_3g_init(void) +{ + rt305x_gpio_init(HW550_3G_GPIO_MODE); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(hw550_3g_leds_gpio), + hw550_3g_leds_gpio); + ramips_register_gpio_buttons(-1, HW550_3G_KEYS_POLL_INTERVAL, + ARRAY_SIZE(hw550_3g_gpio_buttons), + hw550_3g_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_HW550_3G, "HW550-3G", "Aztech HW550-3G", + hw550_3g_init); + +MIPS_MACHINE(RAMIPS_MACH_ALL0239_3G, "ALL0239-3G", "Allnet ALL0239-3G", + hw550_3g_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-mofi3500-3gn.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-mofi3500-3gn.c new file mode 100644 index 0000000000..38d217a4ff --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-mofi3500-3gn.c @@ -0,0 +1,102 @@ +/* + * MoFi Network MOFI3500-3GN board support + * + * Copyright (C) 2011 Layne Edwards <ledwards76@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define MOFI3500_3GN_GPIO_LED_USB 8 +#define MOFI3500_3GN_GPIO_LED_3G 11 +#define MOFI3500_3GN_GPIO_LED_STATUS 12 +#define MOFI3500_3GN_GPIO_LED_WPS 14 + +#define MOFI3500_3GN_GPIO_BUTTON_RESET 10 +#define MOFI3500_3GN_GPIO_BUTTON_CONNECT 7 +#define MOFI3500_3GN_GPIO_BUTTON_WPS 0 + +#define MOFI3500_3GN_KEYS_POLL_INTERVAL 20 +#define MOFI3500_3GN_KEYS_DEBOUNCE_INTERVAL (3 * MOFI3500_3GN_KEYS_POLL_INTERVAL) + +static struct gpio_led mofi3500_3gn_leds_gpio[] __initdata = { + { + .name = "mofi3500-3gn:green:usb", + .gpio = MOFI3500_3GN_GPIO_LED_USB, + .active_low = 1, + }, { + .name = "mofi3500-3gn:green:3g", + .gpio = MOFI3500_3GN_GPIO_LED_3G, + .active_low = 1, + }, { + .name = "mofi3500-3gn:green:status", + .gpio = MOFI3500_3GN_GPIO_LED_STATUS, + .active_low = 1, + }, { + .name = "mofi3500-3gn:green:wps", + .gpio = MOFI3500_3GN_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button mofi3500_3gn_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = MOFI3500_3GN_KEYS_DEBOUNCE_INTERVAL, + .gpio = MOFI3500_3GN_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "connect", + .type = EV_KEY, + .code = KEY_CONNECT, + .debounce_interval = MOFI3500_3GN_KEYS_DEBOUNCE_INTERVAL, + .gpio = MOFI3500_3GN_GPIO_BUTTON_CONNECT, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = MOFI3500_3GN_KEYS_DEBOUNCE_INTERVAL, + .gpio = MOFI3500_3GN_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +#define MOFI3500_3GN_GPIO_MODE \ + ((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \ + RT305X_GPIO_MODE_MDIO) + +static void __init mofi3500_3gn_init(void) +{ + rt305x_gpio_init(MOFI3500_3GN_GPIO_MODE); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(mofi3500_3gn_leds_gpio), + mofi3500_3gn_leds_gpio); + ramips_register_gpio_buttons(-1, MOFI3500_3GN_KEYS_POLL_INTERVAL, + ARRAY_SIZE(mofi3500_3gn_gpio_buttons), + mofi3500_3gn_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_MOFI3500_3GN, "MOFI3500-3GN", "MoFi Network MOFI3500-3GN", + mofi3500_3gn_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-mzk-w300nh2.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-mzk-w300nh2.c new file mode 100644 index 0000000000..01cabbc0bf --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-mzk-w300nh2.c @@ -0,0 +1,94 @@ +/* + * Planex MZK-W300NH2 board support + * + * Copyright (C) 2012 Samir Ibradžić <sibradzic@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define MZKW300NH2_GPIO_BUTTON_RESET 0 /* active low */ +#define MZKW300NH2_GPIO_BUTTON_WPS 12 /* active low */ +#define MZKW300NH2_GPIO_SWITCH_MODE_RT 13 /* active low */ + +#define MZKW300NH2_GPIO_LED_POWER 9 +#define MZKW300NH2_GPIO_LED_WLAN 14 +#define MZKW300NH2_GPIO_LED_WPS 11 + +#define MZKW300NH2_KEYS_POLL_INTERVAL 20 +#define MZKW300NH2_KEYS_DEBOUNCE_INTERVAL (3 * MZKW300NH2_KEYS_POLL_INTERVAL) + +static struct gpio_led mzkw300nh2_leds_gpio[] __initdata = { + { + .name = "mzkw300nh2:green:power", + .gpio = MZKW300NH2_GPIO_LED_POWER, + .active_low = 1, + }, { + .name = "mzkw300nh2:amber:wlan", + .gpio = MZKW300NH2_GPIO_LED_WLAN, + .active_low = 1, + }, { + .name = "mzkw300nh2:amber:wps", + .gpio = MZKW300NH2_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button mzkw300nh2_gpio_buttons[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = MZKW300NH2_KEYS_DEBOUNCE_INTERVAL, + .gpio = MZKW300NH2_GPIO_BUTTON_WPS, + .active_low = 1, + }, { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = MZKW300NH2_KEYS_DEBOUNCE_INTERVAL, + .gpio = MZKW300NH2_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "rt", + .type = EV_KEY, + .code = BTN_0, + .debounce_interval = MZKW300NH2_KEYS_DEBOUNCE_INTERVAL, + .gpio = MZKW300NH2_GPIO_SWITCH_MODE_RT, + .active_low = 1, + } +}; + +static void __init mzkw300nh2_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_UART0(RT305X_GPIO_MODE_GPIO) | + RT305X_GPIO_MODE_I2C | + RT305X_GPIO_MODE_SPI | + RT305X_GPIO_MODE_JTAG); + + rt305x_register_flash(0); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(mzkw300nh2_leds_gpio), + mzkw300nh2_leds_gpio); + ramips_register_gpio_buttons(-1, MZKW300NH2_KEYS_POLL_INTERVAL, + ARRAY_SIZE(mzkw300nh2_gpio_buttons), + mzkw300nh2_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_MZKW300NH2, "MZK-W300NH2", "Planex MZK-W300NH2", + mzkw300nh2_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-nbg-419n.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-nbg-419n.c new file mode 100644 index 0000000000..856520368f --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-nbg-419n.c @@ -0,0 +1,78 @@ +/* + * ZyXEL NBG-419N board support + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define NBG_419N_GPIO_LED_POWER 9 +#define NBG_419N_GPIO_LED_WPS 14 + +#define NBG_419N_GPIO_BUTTON_WPS 0 /* active low */ +#define NBG_419N_GPIO_BUTTON_RESET 10 /* active low */ + +#define NBG_419N_KEYS_POLL_INTERVAL 20 +#define NBG_419N_KEYS_DEBOUNCE_INTERVAL (3 * NBG_419N_KEYS_POLL_INTERVAL) + +static struct gpio_led nbg_419n_leds_gpio[] __initdata = { + { + .name = "nbg-419n:green:power", + .gpio = NBG_419N_GPIO_LED_POWER, + .active_low = 1, + }, { + .name = "nbg-419n:green:wps", + .gpio = NBG_419N_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button nbg_419n_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = NBG_419N_KEYS_DEBOUNCE_INTERVAL, + .gpio = NBG_419N_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = NBG_419N_KEYS_DEBOUNCE_INTERVAL, + .gpio = NBG_419N_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static void __init nbg_419n_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(nbg_419n_leds_gpio), + nbg_419n_leds_gpio); + ramips_register_gpio_buttons(-1, NBG_419N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(nbg_419n_gpio_buttons), + nbg_419n_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_NBG_419N, "NBG-419N", "ZyXEL NBG-419N", nbg_419n_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-nw718.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-nw718.c new file mode 100644 index 0000000000..3c9d047908 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-nw718.c @@ -0,0 +1,95 @@ +/* + * Netcore NW718 board support + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/spi/spi.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define NW718_GPIO_LED_USB 8 +#define NW718_GPIO_LED_CPU 13 +#define NW718_GPIO_LED_WPS 14 + +#define NW718_GPIO_BUTTON_WPS 0 +#define NW718_GPIO_BUTTON_RESET 10 + +#define NW718_GPIO_SPI_CS0 3 + +#define NW718_KEYS_POLL_INTERVAL 20 +#define NW718_KEYS_DEBOUNCE_INTERVAL (3 * NW718_KEYS_POLL_INTERVAL) + +static struct gpio_led nw718_leds_gpio[] __initdata = { + { + .name = "nw718:amber:cpu", + .gpio = NW718_GPIO_LED_CPU, + .active_low = 1, + }, { + .name = "nw718:amber:usb", + .gpio = NW718_GPIO_LED_USB, + .active_low = 1, + }, { + .name = "nw718:amber:wps", + .gpio = NW718_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button nw718_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = NW718_KEYS_DEBOUNCE_INTERVAL, + .gpio = NW718_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = NW718_KEYS_DEBOUNCE_INTERVAL, + .gpio = NW718_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static struct spi_board_info nw718_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "m25p80", + } +}; + +static void __init nw718_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_I2C | + RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(nw718_leds_gpio), + nw718_leds_gpio); + ramips_register_gpio_buttons(-1, NW718_KEYS_POLL_INTERVAL, + ARRAY_SIZE(nw718_gpio_buttons), + nw718_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_spi(nw718_spi_info, ARRAY_SIZE(nw718_spi_info)); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_WHR_G300N, "NW718", "Netcore NW718", nw718_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-omni-emb.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-omni-emb.c new file mode 100644 index 0000000000..930ac3028f --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-omni-emb.c @@ -0,0 +1,74 @@ +/* + * Omnima MiniEMBWiFi board support + * + * Copyright (C) 2011 Johnathan Boyce <jon.boyce@globalreach.eu.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define OMNI_EMB_GPIO_BUTTON_RESET 12 /* active low */ + +#define OMNI_EMB_KEYS_POLL_INTERVAL 20 +#define OMNI_EMB_KEYS_DEBOUNCE_INTERVAL (3 * OMNI_EMB_KEYS_POLL_INTERVAL) + +#define OMNI_EMB_GPIO_LED_STATUS 9 +#define OMNI_EMB_GPIO_LED_WLAN 14 + +static struct gpio_led omni_emb_leds_gpio[] __initdata = { + { + .name = "emb:green:status", + .gpio = OMNI_EMB_GPIO_LED_STATUS, + .active_low = 1, + }, { + .name = "emb:green:wlan", + .gpio = OMNI_EMB_GPIO_LED_WLAN, + .active_low = 1, + } +}; + +static struct gpio_keys_button omni_emb_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = OMNI_EMB_KEYS_DEBOUNCE_INTERVAL, + .gpio = OMNI_EMB_GPIO_BUTTON_RESET, + .active_low = 1, + } +}; + +static void __init omni_emb_init(void) +{ + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(omni_emb_leds_gpio), + omni_emb_leds_gpio); + ramips_register_gpio_buttons(-1, OMNI_EMB_KEYS_POLL_INTERVAL, + ARRAY_SIZE(omni_emb_gpio_buttons), + omni_emb_gpio_buttons); + + rt305x_register_flash(0); + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_OMNI_EMB, "OMNI-EMB", "Omnima MiniEMBWiFi", + omni_emb_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-psr-680w.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-psr-680w.c new file mode 100644 index 0000000000..a6d10f7cbe --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-psr-680w.c @@ -0,0 +1,73 @@ +/* + * Petatel PSR-680W Wireless 3G Router support + * + * Copyright (C) 2012 Dmitry Shmygov <shmygov@rambler.ru> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define PSR_680W_GPIO_BUTTON_RESET 0 /* active low */ + +#define PSR_680W_GPIO_LED_STATUS 19 + +#define PSR_680W_KEYS_POLL_INTERVAL 20 +#define PSR_680W_KEYS_DEBOUNCE_INTERVAL (3 * PSR_680W_KEYS_POLL_INTERVAL) + + +static struct gpio_led psr_680w_leds_gpio[] __initdata = { + { + .name = "psr-680w:red:wan", + .gpio = PSR_680W_GPIO_LED_STATUS, + .active_low = 1, + } +}; + +static struct gpio_keys_button psr_680w_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = PSR_680W_KEYS_DEBOUNCE_INTERVAL, + .gpio = PSR_680W_GPIO_BUTTON_RESET, + .active_low = 1, + } +}; + +static void __init psr_680w_init(void) +{ + rt305x_gpio_init((RT305X_GPIO_MODE_I2S_UARTF << RT305X_GPIO_MODE_UART0_SHIFT) | + RT305X_GPIO_MODE_SPI | + RT305X_GPIO_MODE_JTAG | + RT305X_GPIO_MODE_MDIO | + RT305X_GPIO_MODE_RGMII); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(psr_680w_leds_gpio), + psr_680w_leds_gpio); + ramips_register_gpio_buttons(-1, PSR_680W_KEYS_POLL_INTERVAL, + ARRAY_SIZE(psr_680w_gpio_buttons), + psr_680w_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_PSR_680W, "PSR-680W", + "Petatel PSR-680W Wireless 3G Router", + psr_680w_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-pwh2004.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-pwh2004.c new file mode 100644 index 0000000000..5baf32a49a --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-pwh2004.c @@ -0,0 +1,69 @@ +/* + * Prolink PWH2004 support (or Abocom WR5205) + * + * Copyright (C) 2010 Esa Hyytia <esa@netlab.tkk.fi> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define PWH2004_GPIO_BUTTON_WPS 12 +#define PWH2004_GPIO_LED_POWER 9 +#define PWH2004_GPIO_LED_WIFI 14 +#define PWH2004_KEYS_POLL_INTERVAL 20 +#define PWH2004_KEYS_DEBOUNCE_INTERVAL (3 * PWH2004_KEYS_POLL_INTERVAL) + +static struct gpio_led pwh2004_leds_gpio[] __initdata = { + { + .name = "pwh2004:red:wifi", + .gpio = PWH2004_GPIO_LED_WIFI, + .active_low = 1, + }, { + .name = "pwh2004:green:power", + .gpio = PWH2004_GPIO_LED_POWER, + .active_low = 1, + } +}; + +static struct gpio_keys_button pwh2004_gpio_buttons[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = PWH2004_KEYS_DEBOUNCE_INTERVAL, + .gpio = PWH2004_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static void __init pwh2004_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(pwh2004_leds_gpio), + pwh2004_leds_gpio); + ramips_register_gpio_buttons(-1, PWH2004_KEYS_POLL_INTERVAL, + ARRAY_SIZE(pwh2004_gpio_buttons), + pwh2004_gpio_buttons); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_PWH2004, "PWH2004", "Prolink PWH2004", + pwh2004_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-g32-revb.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-g32-revb.c new file mode 100644 index 0000000000..2f0f710874 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-g32-revb.c @@ -0,0 +1,78 @@ +/* + * Asus RT-G32 rev B board support + * + * Copyright (C) 2011 Sergiy <piratfm@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define RT_G32B_GPIO_BUTTON_WPS 0 /* active low */ +#define RT_G32B_GPIO_BUTTON_RESET 10 /* active low */ + +#define RT_G32B_KEYS_POLL_INTERVAL 20 +#define RT_G32B_KEYS_DEBOUNCE_INTERVAL (3 * RT_G32B_KEYS_POLL_INTERVAL) + +const struct flash_platform_data rt_g32b_flash = { + .type = "mx25l3205d", +}; + +struct spi_board_info __initdata rt_g32b_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &rt_g32b_flash, + .irq = -1, + .max_speed_hz = 10000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static struct gpio_keys_button rt_g32b_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = RT_G32B_KEYS_DEBOUNCE_INTERVAL, + .gpio = RT_G32B_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = RT_G32B_KEYS_DEBOUNCE_INTERVAL, + .gpio = RT_G32B_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static void __init rt_g32b_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + rt305x_register_spi(rt_g32b_spi_slave_info, + ARRAY_SIZE(rt_g32b_spi_slave_info)); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_buttons(-1, RT_G32B_KEYS_POLL_INTERVAL, + ARRAY_SIZE(rt_g32b_gpio_buttons), + rt_g32b_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_RT_G32_B1, "RT-G32-B1", "Asus RT-G32 B1", + rt_g32b_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-n10-plus.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-n10-plus.c new file mode 100644 index 0000000000..5b496d4eac --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-n10-plus.c @@ -0,0 +1,74 @@ +/* + * ASUS RT-N10+ board support + * + * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define RT_N10_PLUS_GPIO_LED_WPS 14 + +#define RT_N10_PLUS_GPIO_BUTTON_WPS 0 /* active low */ +#define RT_N10_PLUS_GPIO_BUTTON_RESET 10 /* active low */ + +#define RT_N10_PLUS_KEYS_POLL_INTERVAL 20 +#define RT_N10_PLUS_KEYS_DEBOUNCE_INTERVAL (3 * RT_N10_PLUS_KEYS_POLL_INTERVAL) + +static struct gpio_led rt_n10_plus_leds_gpio[] __initdata = { + { + .name = "asus:green:wps", + .gpio = RT_N10_PLUS_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button rt_n10_plus_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = RT_N10_PLUS_KEYS_DEBOUNCE_INTERVAL, + .gpio = RT_N10_PLUS_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = RT_N10_PLUS_KEYS_DEBOUNCE_INTERVAL, + .gpio = RT_N10_PLUS_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static void __init rt_n10_plus_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n10_plus_leds_gpio), + rt_n10_plus_leds_gpio); + ramips_register_gpio_buttons(-1, RT_N10_PLUS_KEYS_POLL_INTERVAL, + ARRAY_SIZE(rt_n10_plus_gpio_buttons), + rt_n10_plus_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_RT_N10_PLUS, "RT-N10-PLUS", "Asus RT-N10+", + rt_n10_plus_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-n13u.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-n13u.c new file mode 100644 index 0000000000..cae857abd4 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-rt-n13u.c @@ -0,0 +1,83 @@ +/* + * ASUS RT-N13U board support + * + * Copyright (C) 2012 lintel<lintel.huang@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define RT_N13U_GPIO_BUTTON_RESET 10 +#define RT_N13U_GPIO_BUTTON_WPS 0 + +#define RT_N13U_GPIO_LED_POWER 7 +#define RT_N13U_GPIO_LED_WIFI 8 + + +#define RT_N13U_BUTTONS_POLL_INTERVAL 10 +#define RT_N13U_BUTTONS_DEBOUNCE_INTERVAL (3 * RT_N13U_BUTTONS_POLL_INTERVAL) + +static struct gpio_led rt_n13u_leds_gpio[] __initdata = { + { + .name = "rt-n13u:power", + .gpio = RT_N13U_GPIO_LED_POWER, + .active_low = 1, + }, { + .name = "rt-n13u:wifi", + .gpio = RT_N13U_GPIO_LED_WIFI, + .active_low = 1, + } +}; + +static struct gpio_keys_button rt_n13u_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = RT_N13U_BUTTONS_DEBOUNCE_INTERVAL, + .gpio = RT_N13U_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = RT_N13U_BUTTONS_DEBOUNCE_INTERVAL, + .gpio = RT_N13U_GPIO_BUTTON_WPS, + .active_low = 1, + }, +}; + +static void __init rt_n13u_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n13u_leds_gpio), + rt_n13u_leds_gpio); + + ramips_register_gpio_buttons(-1, RT_N13U_BUTTONS_POLL_INTERVAL, + ARRAY_SIZE(rt_n13u_gpio_buttons), + rt_n13u_gpio_buttons); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_RT_N13U, "RT-N13U", "Asus RT-N13U", + rt_n13u_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-sl-r7205.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-sl-r7205.c new file mode 100644 index 0000000000..31f002c9aa --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-sl-r7205.c @@ -0,0 +1,76 @@ +/* + * Skyline SL-R7205 Wireless 3G Router support + * + * Copyright (C) 2012 Haipoh Teoh <hpteoh@ceedtec.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define SL_R7205_GPIO_BUTTON_WPS 0 +#define SL_R7205_GPIO_BUTTON_RESET 10 /* active low */ + +#define SL_R7205_GPIO_LED_WIFI 7 + +#define SL_R7205_KEYS_POLL_INTERVAL 20 +#define SL_R7205_KEYS_DEBOUNCE_INTERVAL (3 * SL_R7205_KEYS_POLL_INTERVAL) + +static struct gpio_led sl_r7205_leds_gpio[] __initdata = { + { + .name = "sl-r7205:green:wifi", + .gpio = SL_R7205_GPIO_LED_WIFI, + .active_low = 1, + } +}; + +static struct gpio_keys_button sl_r7205_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = SL_R7205_KEYS_DEBOUNCE_INTERVAL, + .gpio = SL_R7205_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = SL_R7205_KEYS_DEBOUNCE_INTERVAL, + .gpio = SL_R7205_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static void __init sl_r7205_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(sl_r7205_leds_gpio), + sl_r7205_leds_gpio); + ramips_register_gpio_buttons(-1, SL_R7205_KEYS_POLL_INTERVAL, + ARRAY_SIZE(sl_r7205_gpio_buttons), + sl_r7205_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_SL_R7205, "SL-R7205", + "Skyline SL-R7205 Wireless 3G Router", + sl_r7205_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-ur-326n4g.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-ur-326n4g.c new file mode 100644 index 0000000000..a5296941a1 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-ur-326n4g.c @@ -0,0 +1,102 @@ +/* + * UR-326N4G board support + * + * Copyright (C) 2013 Dmitry Lebedev <Lebedev@upvel.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + + +#define UR_326N4G_GPIO_LED_3G 9 +#define UR_326N4G_GPIO_LED_GATEWAY 11 +#define UR_326N4G_GPIO_LED_AP 12 +#define UR_326N4G_GPIO_LED_STATION 13 +#define UR_326N4G_GPIO_LED_WPS 14 + +#define UR_326N4G_GPIO_BUTTON_RESET 10 +#define UR_326N4G_GPIO_BUTTON_CONNECT 7 +#define UR_326N4G_GPIO_BUTTON_WPS 0 +#define UR_326N4G_GPIO_BUTTON_WPS2 8 + +#define UR_326N4G_KEYS_POLL_INTERVAL 20 +#define UR_326N4G_KEYS_DEBOUNCE_INTERVAL (3 * UR_326N4G_KEYS_POLL_INTERVAL) + +static struct gpio_led UR_326N4G_leds_gpio[] __initdata = { + { + .name = "ur326:green:3g", + .gpio = UR_326N4G_GPIO_LED_3G, + .active_low = 1, + }, { + .name = "ur326:green:gateway", + .gpio = UR_326N4G_GPIO_LED_GATEWAY, + .active_low = 1, + }, { + .name = "ur326:green:ap", + .gpio = UR_326N4G_GPIO_LED_AP, + .active_low = 1, + }, { + .name = "ur326:green:wps", + .gpio = UR_326N4G_GPIO_LED_WPS, + .active_low = 1, + }, { + .name = "ur326:green:station", + .gpio = UR_326N4G_GPIO_LED_STATION, + .active_low = 1, + } +}; + +static struct gpio_keys_button UR_326N4G_gpio_buttons[] __initdata = { + { + .desc = "reset_wps", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = UR_326N4G_KEYS_DEBOUNCE_INTERVAL, + .gpio = UR_326N4G_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "mode", + .type = EV_KEY, + .code = KEY_M, + .debounce_interval = UR_326N4G_KEYS_DEBOUNCE_INTERVAL, + .gpio = UR_326N4G_GPIO_BUTTON_CONNECT, + .active_low = 1, + } +}; + +#define UR_326N4G_GPIO_MODE \ + ((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \ + RT305X_GPIO_MODE_MDIO) + +static void __init UR_326N4G_init(void) +{ + rt305x_gpio_init(UR_326N4G_GPIO_MODE); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(UR_326N4G_leds_gpio), + UR_326N4G_leds_gpio); + ramips_register_gpio_buttons(-1, UR_326N4G_KEYS_POLL_INTERVAL, + ARRAY_SIZE(UR_326N4G_gpio_buttons), + UR_326N4G_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_UR_326N4G, "UR-326N4G", "UR-326N4G Wireless N router", + UR_326N4G_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-ur-336un.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-ur-336un.c new file mode 100644 index 0000000000..0ff264957a --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-ur-336un.c @@ -0,0 +1,92 @@ +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + + +#define UR_336UN_GPIO_LED_3G 9 +#define UR_336UN_GPIO_LED_GATEWAY 11 +#define UR_336UN_GPIO_LED_AP 12 +#define UR_336UN_GPIO_LED_STATION 13 +#define UR_336UN_GPIO_LED_WPS 14 + +#define UR_336UN_GPIO_BUTTON_RESET 10 +#define UR_336UN_GPIO_BUTTON_CONNECT 7 +#define UR_336UN_GPIO_BUTTON_WPS 0 +#define UR_336UN_GPIO_BUTTON_WPS2 8 + +#define UR_336UN_KEYS_POLL_INTERVAL 20 +#define UR_336UN_KEYS_DEBOUNCE_INTERVAL (3 * UR_336UN_KEYS_POLL_INTERVAL) + +static struct gpio_led UR_336UN_leds_gpio[] __initdata = { + { + .name = "ur336:green:3g", + .gpio = UR_336UN_GPIO_LED_3G, + .active_low = 1, + }, { + .name = "ur336:green:gateway", + .gpio = UR_336UN_GPIO_LED_GATEWAY, + .active_low = 1, + }, { + .name = "ur336:green:ap", + .gpio = UR_336UN_GPIO_LED_AP, + .active_low = 1, + }, { + .name = "ur336:green:wps", + .gpio = UR_336UN_GPIO_LED_WPS, + .active_low = 1, + }, { + .name = "ur336:green:station", + .gpio = UR_336UN_GPIO_LED_STATION, + .active_low = 1, + } +}; + +static struct gpio_keys_button UR_336UN_gpio_buttons[] __initdata = { + { + .desc = "reset_wps", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = UR_336UN_KEYS_DEBOUNCE_INTERVAL, + .gpio = UR_336UN_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "mode", + .type = EV_KEY, + .code = KEY_M, + .debounce_interval = UR_336UN_KEYS_DEBOUNCE_INTERVAL, + .gpio = UR_336UN_GPIO_BUTTON_CONNECT, + .active_low = 1, + } +}; + +#define UR_336UN_GPIO_MODE \ + ((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \ + RT305X_GPIO_MODE_MDIO) + +static void __init UR_336UN_init(void) +{ + rt305x_gpio_init(UR_336UN_GPIO_MODE); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(UR_336UN_leds_gpio), + UR_336UN_leds_gpio); + ramips_register_gpio_buttons(-1, UR_336UN_KEYS_POLL_INTERVAL, + ARRAY_SIZE(UR_336UN_gpio_buttons), + UR_336UN_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_UR_336UN, "UR-336UN", "UR-336UN Wireless N router", + UR_336UN_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-v22rw-2x2.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-v22rw-2x2.c new file mode 100644 index 0000000000..7f43dabdc4 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-v22rw-2x2.c @@ -0,0 +1,79 @@ +/* + * Ralink AP-RT3052-V22RW-2X2 board support + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define V22RW_2X2_GPIO_BUTTON_WPS 0 +#define V22RW_2X2_GPIO_BUTTON_SWRST 10 +#define V22RW_2X2_GPIO_LED_SECURITY 13 +#define V22RW_2X2_GPIO_LED_WPS 14 + +#define V22RW_2X2_KEYS_POLL_INTERVAL 20 +#define V22RW_2X2_KEYS_DEBOUNCE_INTERVAL (3 * V22RW_2X2_KEYS_POLL_INTERVAL) + +static struct gpio_led v22rw_2x2_leds_gpio[] __initdata = { + { + .name = "v22rw-2x2:green:security", + .gpio = V22RW_2X2_GPIO_LED_SECURITY, + .active_low = 1, + }, { + .name = "v22rw-2x2:red:wps", + .gpio = V22RW_2X2_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button v22rw_2x2_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = V22RW_2X2_KEYS_DEBOUNCE_INTERVAL, + .gpio = V22RW_2X2_GPIO_BUTTON_SWRST, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = V22RW_2X2_KEYS_DEBOUNCE_INTERVAL, + .gpio = V22RW_2X2_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static void __init v22rw_2x2_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(v22rw_2x2_leds_gpio), + v22rw_2x2_leds_gpio); + ramips_register_gpio_buttons(-1, V22RW_2X2_KEYS_POLL_INTERVAL, + ARRAY_SIZE(v22rw_2x2_gpio_buttons), + v22rw_2x2_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_V22RW_2X2, "V22RW-2X2", "Ralink AP-RT3052-V22RW-2X2", + v22rw_2x2_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-w306r-v20.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-w306r-v20.c new file mode 100644 index 0000000000..7c8eb867cd --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-w306r-v20.c @@ -0,0 +1,72 @@ +/* + * Tenda W306R V2.0 board support + * + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ethtool.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> +#include <asm/mach-ralink/ramips_eth_platform.h> + +#include "devices.h" + +#define W306R_V20_GPIO_LED_SYS 9 +#define W306R_V20_GPIO_LED_WPS 13 + +#define W306R_V20_GPIO_BUTTON_RESET 10 + +#define W306R_V20_KEYS_POLL_INTERVAL 20 +#define W306R_V20_KEYS_DEBOUNCE_INTERVAL (3 * W306R_V20_KEYS_POLL_INTERVAL) + +static struct gpio_led w306r_v20_leds_gpio[] __initdata = { + { + .name = "w306r-v20:green:sys", + .gpio = W306R_V20_GPIO_LED_SYS, + .active_low = 1, + }, { + .name = "w306r-v20:green:wps", + .gpio = W306R_V20_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button w306r_v20_gpio_buttons[] __initdata = { + { + .desc = "RESET/WPS", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = W306R_V20_KEYS_DEBOUNCE_INTERVAL, + .gpio = W306R_V20_GPIO_BUTTON_RESET, + .active_low = 1, + } +}; + +static void __init w306r_v20_init(void) +{ + rt305x_register_flash(0); + + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(w306r_v20_leds_gpio), + w306r_v20_leds_gpio); + ramips_register_gpio_buttons(-1, W306R_V20_KEYS_POLL_INTERVAL, + ARRAY_SIZE(w306r_v20_gpio_buttons), + w306r_v20_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_W306R_V20, "W306R_V20", "Tenda W306R V2.0", + w306r_v20_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-w502u.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-w502u.c new file mode 100644 index 0000000000..6633ca0288 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-w502u.c @@ -0,0 +1,83 @@ +/* + * ALFA Networks W502U board support + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define W502U_GPIO_LED_USB 13 +#define W502U_GPIO_LED_WPS 14 + +#define W502U_GPIO_BUTTON_WPS 0 +#define W502U_GPIO_BUTTON_RESET 10 + +#define W502U_KEYS_POLL_INTERVAL 20 +#define W502U_KEYS_DEBOUNCE_INTERVAL (3 * W502U_KEYS_POLL_INTERVAL) + +static struct gpio_led w502u_leds_gpio[] __initdata = { + { + .name = "alfa:blue:usb", + .gpio = W502U_GPIO_LED_USB, + .active_low = 1, + }, + { + .name = "alfa:blue:wps", + .gpio = W502U_GPIO_LED_WPS, + .active_low = 1, + }, +}; + +static struct gpio_keys_button w502u_gpio_buttons[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = W502U_KEYS_DEBOUNCE_INTERVAL, + .gpio = W502U_GPIO_BUTTON_RESET, + .active_low = 1, + }, + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = W502U_KEYS_DEBOUNCE_INTERVAL, + .gpio = W502U_GPIO_BUTTON_WPS, + .active_low = 1, + }, +}; + +static void __init w502u_init(void) +{ + rt305x_gpio_init((RT305X_GPIO_MODE_GPIO << + RT305X_GPIO_MODE_UART0_SHIFT)); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(w502u_leds_gpio), + w502u_leds_gpio); + ramips_register_gpio_buttons(-1, W502U_KEYS_POLL_INTERVAL, + ARRAY_SIZE(w502u_gpio_buttons), + w502u_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_W502U, "W502U", "ALFA Networks W502U", + w502u_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wcr150gn.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wcr150gn.c new file mode 100644 index 0000000000..dec1a7bb5b --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wcr150gn.c @@ -0,0 +1,80 @@ +/* + * Sparklan WCR-150GN board support + * + * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define WCR150GN_GPIO_LED_USER 12 +#define WCR150GN_GPIO_LED_POWER 8 +#define WCR150GN_GPIO_BUTTON_WPS 10 +#define WCR150GN_GPIO_BUTTON_RESET 0 +#define WCR150GN_KEYS_POLL_INTERVAL 20 +#define WCR150GN_KEYS_DEBOUNCE_INTERVAL (3 * WCR150GN_KEYS_POLL_INTERVAL) + +static struct gpio_led wcr150gn_leds_gpio[] __initdata = { + { + .name = "wcr150gn:amber:user", + .gpio = WCR150GN_GPIO_LED_USER, + .active_low = 1, + }, + { + .name = "wcr150gn:amber:power", + .gpio = WCR150GN_GPIO_LED_POWER, + .active_low = 1, + } +}; + +static struct gpio_keys_button wcr150gn_gpio_buttons[] __initdata = { + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WCR150GN_KEYS_DEBOUNCE_INTERVAL, + .gpio = WCR150GN_GPIO_BUTTON_WPS, + .active_low = 1, + }, + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WCR150GN_KEYS_DEBOUNCE_INTERVAL, + .gpio = WCR150GN_GPIO_BUTTON_RESET, + .active_low = 1, + } +}; + +static void __init wcr150gn_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(wcr150gn_leds_gpio), + wcr150gn_leds_gpio); + ramips_register_gpio_buttons(-1, WCR150GN_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wcr150gn_gpio_buttons), + wcr150gn_gpio_buttons); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_WCR150GN, "WCR150GN", "Sparklan WCR-150GN", + wcr150gn_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-whr-g300n.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-whr-g300n.c new file mode 100644 index 0000000000..e5adb1909f --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-whr-g300n.c @@ -0,0 +1,100 @@ +/* + * Buffalo WHR-G300N board support + * + * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define WHR_G300N_GPIO_LED_DIAG 7 +#define WHR_G300N_GPIO_LED_ROUTER 9 +#define WHR_G300N_GPIO_LED_SECURITY 14 + +#define WHR_G300N_GPIO_BUTTON_AOSS 0 /* active low */ +#define WHR_G300N_GPIO_BUTTON_RESET 10 /* active low */ +#define WHR_G300N_GPIO_BUTTON_ROUTER_ON 8 /* active low */ +#define WHR_G300N_GPIO_BUTTON_ROUTER_OFF 11 /* active low */ + +#define WHR_G300N_KEYS_POLL_INTERVAL 20 +#define WHR_G300N_KEYS_DEBOUNCE_INTERVAL (3 * WHR_G300N_KEYS_POLL_INTERVAL) + +static struct gpio_led whr_g300n_leds_gpio[] __initdata = { + { + .name = "whr-g300n:red:diag", + .gpio = WHR_G300N_GPIO_LED_DIAG, + .active_low = 1, + }, { + .name = "whr-g300n:green:router", + .gpio = WHR_G300N_GPIO_LED_ROUTER, + .active_low = 1, + }, { + .name = "whr-g300n:amber:security", + .gpio = WHR_G300N_GPIO_LED_SECURITY, + .active_low = 1, + } +}; + +static struct gpio_keys_button whr_g300n_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WHR_G300N_KEYS_DEBOUNCE_INTERVAL, + .gpio = WHR_G300N_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "aoss", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WHR_G300N_KEYS_DEBOUNCE_INTERVAL, + .gpio = WHR_G300N_GPIO_BUTTON_AOSS, + .active_low = 1, + }, { + .desc = "router-off", + .type = EV_KEY, + .code = BTN_2, + .debounce_interval = WHR_G300N_KEYS_DEBOUNCE_INTERVAL, + .gpio = WHR_G300N_GPIO_BUTTON_ROUTER_OFF, + .active_low = 1, + }, { + .desc = "router-on", + .type = EV_KEY, + .code = BTN_3, + .debounce_interval = WHR_G300N_KEYS_DEBOUNCE_INTERVAL, + .gpio = WHR_G300N_GPIO_BUTTON_ROUTER_ON, + .active_low = 1, + } +}; + +static void __init whr_g300n_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(whr_g300n_leds_gpio), + whr_g300n_leds_gpio); + ramips_register_gpio_buttons(-1, WHR_G300N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(whr_g300n_gpio_buttons), + whr_g300n_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_WHR_G300N, "WHR-G300N", "Buffalo WHR-G300N", + whr_g300n_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl-330n.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl-330n.c new file mode 100644 index 0000000000..b548dfee1d --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl-330n.c @@ -0,0 +1,94 @@ +/* + * Asus WL_330N board support + * + * Copyright (C) 2012 Frederic Leroy <fredo@starox.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define WL_330N_GPIO_BUTTON_RESET 10 +#define WL_330N_GPIO_BUTTON_WPS 0 +#define WL_330N_GPIO_LED_LINK 9 +#define WL_330N_GPIO_LED_POWER 11 +#define WL_330N_KEYS_POLL_INTERVAL 20 +#define WL_330N_KEYS_DEBOUNCE_INTERVAL (3 * WL_330N_KEYS_POLL_INTERVAL) + +const struct flash_platform_data wl_330n_flash = { + .type = "mx25l3205d", +}; + +struct spi_board_info wl_330n_spi_slave_info[] __initdata = { + { + .modalias = "m25p80", + .platform_data = &wl_330n_flash, + .irq = -1, + .max_speed_hz = 10000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static struct gpio_keys_button wl_330n_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WL_330N_KEYS_DEBOUNCE_INTERVAL, + .gpio = WL_330N_GPIO_BUTTON_RESET, + .active_low = 1, + }, + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WL_330N_KEYS_DEBOUNCE_INTERVAL, + .gpio = WL_330N_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static struct gpio_led wl_330n_leds_gpio[] __initdata = { + { + .name = "asus:blue:link", + .gpio = WL_330N_GPIO_LED_LINK, + .active_low = 1, + }, { + .name = "asus:blue:power", + .gpio = WL_330N_GPIO_LED_POWER, + .active_low = 1, + } +}; + +static void __init wl_330n_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + rt305x_register_spi(wl_330n_spi_slave_info, + ARRAY_SIZE(wl_330n_spi_slave_info)); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(wl_330n_leds_gpio), + wl_330n_leds_gpio); + ramips_register_gpio_buttons(-1, WL_330N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wl_330n_gpio_buttons), + wl_330n_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_WL_330N, "WL_330N", "Asus WL-330N", + wl_330n_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl-330n3g.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl-330n3g.c new file mode 100644 index 0000000000..599b9a9adb --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl-330n3g.c @@ -0,0 +1,100 @@ +/* + * Asus WL_330N3G board support + * + * Copyright (C) 2012 Frederic Leroy <fredo@starox.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define WL_330N3G_GPIO_BUTTON_RESET 10 +#define WL_330N3G_GPIO_BUTTON_WPS 0 +#define WL_330N3G_GPIO_LED_3G_BLUE 9 +#define WL_330N3G_GPIO_LED_3G_RED 13 +#define WL_330N3G_GPIO_LED_POWER 11 +#define WL_330N3G_KEYS_POLL_INTERVAL 20 +#define WL_330N3G_KEYS_DEBOUNCE_INTERVAL (3 * WL_330N3G_KEYS_POLL_INTERVAL) + +const struct flash_platform_data wl_330n3g_flash = { + .type = "mx25l3205d", +}; + +struct spi_board_info wl_330n3g_spi_slave_info[] __initdata = { + { + .modalias = "m25p80", + .platform_data = &wl_330n3g_flash, + .irq = -1, + .max_speed_hz = 10000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static struct gpio_keys_button wl_330n3g_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WL_330N3G_KEYS_DEBOUNCE_INTERVAL, + .gpio = WL_330N3G_GPIO_BUTTON_RESET, + .active_low = 1, + }, + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WL_330N3G_KEYS_DEBOUNCE_INTERVAL, + .gpio = WL_330N3G_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static struct gpio_led wl_330n3g_leds_gpio[] __initdata = { + { + .name = "asus:blue:3g", + .gpio = WL_330N3G_GPIO_LED_3G_BLUE, + .active_low = 1, + }, { + .name = "asus:red:3g", + .gpio = WL_330N3G_GPIO_LED_3G_RED, + .active_low = 1, + }, { + .name = "asus:blue:power", + .gpio = WL_330N3G_GPIO_LED_POWER, + .active_low = 1, + } +}; + +static void __init wl_330n3g_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + rt305x_register_spi(wl_330n3g_spi_slave_info, + ARRAY_SIZE(wl_330n3g_spi_slave_info)); + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(wl_330n3g_leds_gpio), + wl_330n3g_leds_gpio); + ramips_register_gpio_buttons(-1, WL_330N3G_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wl_330n3g_gpio_buttons), + wl_330n3g_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_usb(); + rt305x_register_wdt(); +} + +MIPS_MACHINE(RAMIPS_MACH_WL_330N3G, "WL_330N3G", "Asus WL-330N3G", + wl_330n3g_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl341v3.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl341v3.c new file mode 100644 index 0000000000..2cd1d5e47a --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl341v3.c @@ -0,0 +1,105 @@ +/* + * Sitecom WL341v3 board support + * + * Copyright (C) 2012 Marco Antonio Mauro <marcus90@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define WL341V3_GPIO_LED_FIRST_AMBER 9 +#define WL341V3_GPIO_LED_FIRST_BLUE 13 +#define WL341V3_GPIO_LED_THIRD_AMBER 11 +#define WL341V3_GPIO_LED_THIRD_BLUE 14 +#define WL341V3_GPIO_LED_FOURTH_BLUE 10 +#define WL341V3_GPIO_LED_FIFTH_AMBER 12 +#define WL341V3_GPIO_LED_FIFTH_BLUE 8 + +#define WL341V3_GPIO_BUTTON_WPS 5 /* active low */ +#define WL341V3_GPIO_BUTTON_RESET 7 /* active low */ + +#define WL341V3_KEYS_POLL_INTERVAL 20 +#define WL341V3_KEYS_DEBOUNCE_INTERVAL (3 * WL341V3_KEYS_POLL_INTERVAL) + +static struct gpio_led wl341v3_leds_gpio[] __initdata = { + { + .name = "wl341v3:amber:first", + .gpio = WL341V3_GPIO_LED_FIRST_AMBER, + .active_low = 1, + }, { + .name = "wl341v3:blue:first", + .gpio = WL341V3_GPIO_LED_FIRST_BLUE, + .active_low = 1, + }, { + .name = "wl341v3:amber:third", + .gpio = WL341V3_GPIO_LED_THIRD_AMBER, + .active_low = 1, + }, { + .name = "wl341v3:blue:third", + .gpio = WL341V3_GPIO_LED_THIRD_BLUE, + .active_low = 1, + }, { + .name = "wl341v3:blue:fourth", + .gpio = WL341V3_GPIO_LED_FOURTH_BLUE, + .active_low = 1, + }, { + .name = "wl341v3:amber:fifth", + .gpio = WL341V3_GPIO_LED_FIFTH_AMBER, + .active_low = 1, + }, { + .name = "wl341v3:blue:fifth", + .gpio = WL341V3_GPIO_LED_FIFTH_BLUE, + .active_low = 1, + } +}; + +static struct gpio_keys_button wl341v3_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WL341V3_KEYS_DEBOUNCE_INTERVAL, + .gpio = WL341V3_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WL341V3_KEYS_DEBOUNCE_INTERVAL, + .gpio = WL341V3_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static void __init wl341v3_init(void) +{ + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(wl341v3_leds_gpio), + wl341v3_leds_gpio); + ramips_register_gpio_buttons(-1, WL341V3_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wl341v3_gpio_buttons), + wl341v3_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_WL341V3, "WL341V3", "Sitecom WL-341 v3", + wl341v3_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl351.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl351.c new file mode 100644 index 0000000000..8c0caadb1a --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wl351.c @@ -0,0 +1,118 @@ +/* + * Sitecom WL-351 v1 002 board support + * + * Copyright (C) 2011 Tobias Diedrich <ranma+openwrt@tdiedrich.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> + +#include <linux/rtl8366.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define WL351_GPIO_LED_POWER_AMBER 8 +#define WL351_GPIO_LED_UNPOPULATED_AMBER 12 +#define WL351_GPIO_LED_UNPOPULATED_BLUE 13 + +#define WL351_GPIO_BUTTON_RESET 10 +#define WL351_GPIO_BUTTON_WPS 0 + +#define WL351_KEYS_POLL_INTERVAL 20 +#define WL351_KEYS_DEBOUNCE_INTERVAL (3 * WL351_KEYS_POLL_INTERVAL) + +static struct gpio_led wl351_leds_gpio[] __initdata = { + { + .name = "wl-351:amber:power", + .gpio = WL351_GPIO_LED_POWER_AMBER, + .active_low = 1, + }, { + .name = "wl-351:amber:unpopulated", + .gpio = WL351_GPIO_LED_UNPOPULATED_AMBER, + .active_low = 1, + }, { + .name = "wl-351:blue:unpopulated", + .gpio = WL351_GPIO_LED_UNPOPULATED_BLUE, + .active_low = 1, + } +}; + + +static struct gpio_keys_button wl351_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WL351_KEYS_DEBOUNCE_INTERVAL, + .gpio = WL351_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WL351_KEYS_DEBOUNCE_INTERVAL, + .gpio = WL351_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static struct rtl8366_platform_data wl351_switch_data = { + .gpio_sda = RT305X_GPIO_I2C_SD, + .gpio_sck = RT305X_GPIO_I2C_SCLK, +}; + +static struct platform_device wl351_switch = { + .name = RTL8366RB_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &wl351_switch_data, + } +}; + +static void __init wl351_init(void) +{ + rt305x_gpio_init((RT305X_GPIO_MODE_GPIO << + RT305X_GPIO_MODE_UART0_SHIFT) | + RT305X_GPIO_MODE_I2C | + RT305X_GPIO_MODE_SPI | + RT305X_GPIO_MODE_MDIO); + + rt305x_register_flash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(wl351_leds_gpio), + wl351_leds_gpio); + ramips_register_gpio_buttons(-1, WL351_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wl351_gpio_buttons), + wl351_gpio_buttons); + /* External RTL8366RB. */ + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE; + rt305x_esw_data.reg_initval_fct2 = 0x0002500c; + /* + * ext phy base addr 31, rx/tx clock skew 0, + * turbo mii off, rgmi 3.3v off, port 5 polling off + * port5: enabled, gige, full-duplex, rx/tx-flow-control + * port6: enabled, gige, full-duplex, rx/tx-flow-control + */ + rt305x_esw_data.reg_initval_fpa2 = 0x1f003fff; + rt305x_register_ethernet(); + platform_device_register(&wl351_switch); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_WL351, "WL-351", "Sitecom WL-351 v1 002", + wl351_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wr512-3gn.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wr512-3gn.c new file mode 100644 index 0000000000..eed752353d --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wr512-3gn.c @@ -0,0 +1,110 @@ +/* + * Unbranded router from DX board support + * Also known as *WR512*-3GN by local vendors + * e.g. WS-WR512N1, Sin Hon SH-WR512NU, and etc + * (http://www.dealextreme.com/p/portable-wireless-n-3g-router-cdma2000-evdo-td-scdma-hspa-wcdma-45639) + * This router is also known to be rebranded and sold by a number of local + * vendors in several countries. + * + * Copyright (C) 2011 Andrew Andrianov <necromant@necromant.ath.cx> + * Based on MOFI3500-3N code by + * Copyright (C) 2011 Layne Edwards <ledwards76@gmail.com> + * + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + + +#define WR512_3GN_GPIO_LED_3G 9 +#define WR512_3GN_GPIO_LED_GATEWAY 11 +#define WR512_3GN_GPIO_LED_AP 12 +#define WR512_3GN_GPIO_LED_STATION 13 +#define WR512_3GN_GPIO_LED_WPS 14 + +#define WR512_3GN_GPIO_BUTTON_RESET 10 +#define WR512_3GN_GPIO_BUTTON_CONNECT 7 +#define WR512_3GN_GPIO_BUTTON_WPS 0 +#define WR512_3GN_GPIO_BUTTON_WPS2 8 + +#define WR512_3GN_KEYS_POLL_INTERVAL 20 +#define WR512_3GN_KEYS_DEBOUNCE_INTERVAL (3 * WR512_3GN_KEYS_POLL_INTERVAL) + +static struct gpio_led wr512_3gn_leds_gpio[] __initdata = { + { + .name = "wr512:green:3g", + .gpio = WR512_3GN_GPIO_LED_3G, + .active_low = 1, + }, { + .name = "wr512:green:gateway", + .gpio = WR512_3GN_GPIO_LED_GATEWAY, + .active_low = 1, + }, { + .name = "wr512:green:ap", + .gpio = WR512_3GN_GPIO_LED_AP, + .active_low = 1, + }, { + .name = "wr512:green:wps", + .gpio = WR512_3GN_GPIO_LED_WPS, + .active_low = 1, + }, { + .name = "wr512:green:station", + .gpio = WR512_3GN_GPIO_LED_STATION, + .active_low = 1, + } +}; + +static struct gpio_keys_button wr512_3gn_gpio_buttons[] __initdata = { + { + .desc = "reset_wps", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WR512_3GN_KEYS_DEBOUNCE_INTERVAL, + .gpio = WR512_3GN_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "mode", + .type = EV_KEY, + .code = KEY_M, + .debounce_interval = WR512_3GN_KEYS_DEBOUNCE_INTERVAL, + .gpio = WR512_3GN_GPIO_BUTTON_CONNECT, + .active_low = 1, + } +}; + +#define WR512_3GN_GPIO_MODE \ + ((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \ + RT305X_GPIO_MODE_MDIO) + +static void __init wr512_3gn_init(void) +{ + rt305x_gpio_init(WR512_3GN_GPIO_MODE); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_register_ethernet(); + ramips_register_gpio_leds(-1, ARRAY_SIZE(wr512_3gn_leds_gpio), + wr512_3gn_leds_gpio); + ramips_register_gpio_buttons(-1, WR512_3GN_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wr512_3gn_gpio_buttons), + wr512_3gn_gpio_buttons); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_WR512_3GN, "WR512-3GN", "WR512-3GN-like router", + wr512_3gn_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wr6202.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wr6202.c new file mode 100644 index 0000000000..591d9ceb59 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-wr6202.c @@ -0,0 +1,90 @@ +/* + * AWB WR6202 board support + * + * Copyright (C) 2012 Johnathan Boyce<jon.boyce@globalreach.eu.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include<linux/init.h> +#include<linux/platform_device.h> +#include<linux/gpio.h> + +#include<asm/mach-ralink/machine.h> +#include<asm/mach-ralink/dev-gpio-buttons.h> +#include<asm/mach-ralink/dev-gpio-leds.h> +#include<asm/mach-ralink/rt305x.h> +#include<asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define WR6202_GPIO_BUTTON_RESET 10 /* active low */ +#define WR6202_GPIO_BUTTON_WPS 0 /* active low */ + +#define WR6202_KEYS_POLL_INTERVAL 20 +#define WR6202_KEYS_DEBOUNCE_INTERVAL (3 * WR6202_KEYS_POLL_INTERVAL) + +#define WR6202_GPIO_USB_POWER 11 + +#define WR6202_GPIO_LED_3G 13 +#define WR6202_GPIO_LED_WPS 14 + +static struct gpio_led wr6202_leds_gpio[] __initdata = { + { + .name = "wr6202:blue:wps", + .gpio = WR6202_GPIO_LED_WPS, + .active_low = 1, + }, { + .name = "wr6202:blue:3g", + .gpio = WR6202_GPIO_LED_3G, + .active_low = 1, + } +}; + +static struct gpio_keys_button wr6202_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WR6202_KEYS_DEBOUNCE_INTERVAL, + .gpio = WR6202_GPIO_BUTTON_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WR6202_KEYS_DEBOUNCE_INTERVAL, + .gpio = WR6202_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static void __init wr6202_init(void) +{ + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + + rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(wr6202_leds_gpio), + wr6202_leds_gpio); + ramips_register_gpio_buttons(-1, WR6202_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wr6202_gpio_buttons), + wr6202_gpio_buttons); + + /* Power to the USB port is controlled by GPIO line */ + gpio_request(WR6202_GPIO_USB_POWER, "WR6202_GPIO_USB_POWER"); + gpio_direction_output(WR6202_GPIO_USB_POWER, 0); + gpio_free(WR6202_GPIO_USB_POWER); + + rt305x_register_flash(0); + + rt305x_register_ethernet(); + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_WR6202, "WR6202", "AWB WR6202", + wr6202_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-xdx-rn502j.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-xdx-rn502j.c new file mode 100644 index 0000000000..f7ef353262 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/mach-xdx-rn502j.c @@ -0,0 +1,79 @@ +/* + * Unknown router name/model, PCB marked with XDX-RN502J + * + * Copyright (C) 2011 Bruno Schwander bruno@tinkerbox.org + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +#include "devices.h" + +#define XDXRN502J_GPIO_BUTTON_RESET 12 +#define XDXRN502J_GPIO_LED_WIFI 7 +#define XDXRN502J_GPIO_LED_POWER 9 + +#define XDXRN502J_BUTTONS_POLL_INTERVAL 20 +#define XDXRN502J_BUTTONS_DEBOUNCE_INTERVAL (3 * XDXRN502J_BUTTONS_POLL_INTERVAL) + + +static struct gpio_led xdxrn502j_leds_gpio[] __initdata = { + { + .name = "xdxrn502j:green:wifi", + .gpio = XDXRN502J_GPIO_LED_WIFI, + .active_low = 1, + }, { + .name = "xdxrn502j:green:power", + .gpio = XDXRN502J_GPIO_LED_POWER, + .active_low = 1, + } +}; + +static struct gpio_keys_button xdxrn502j_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = XDXRN502J_BUTTONS_DEBOUNCE_INTERVAL, + .gpio = XDXRN502J_GPIO_BUTTON_RESET, + .active_low = 1, + } +}; + +#define XDXRN502J_GPIO_MODE \ + ((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \ + RT305X_GPIO_MODE_MDIO) + +static void __init xdxrn502j_init(void) +{ + rt305x_gpio_init(XDXRN502J_GPIO_MODE); + + rt305x_register_flash(0); + + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_register_ethernet(); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(xdxrn502j_leds_gpio), + xdxrn502j_leds_gpio); + + ramips_register_gpio_buttons(-1, XDXRN502J_BUTTONS_POLL_INTERVAL, + ARRAY_SIZE(xdxrn502j_gpio_buttons), + xdxrn502j_gpio_buttons); + + rt305x_register_wifi(); + rt305x_register_wdt(); + rt305x_register_usb(); +} + +MIPS_MACHINE(RAMIPS_MACH_XDXRN502J, "XDXRN502J", "XDX RN502J", + xdxrn502j_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/rt305x.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/rt305x.c new file mode 100644 index 0000000000..8a7a58b7d5 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/rt305x.c @@ -0,0 +1,247 @@ +/* + * Ralink RT305x SoC specific setup + * + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> + +#include <asm/mipsregs.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/ramips_gpio.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> + +void __iomem * rt305x_sysc_base; +void __iomem * rt305x_memc_base; +enum rt305x_soc_type rt305x_soc; + +static unsigned long rt5350_get_mem_size(void) +{ + void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE); + unsigned long ret; + u32 t; + + t = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG); + t = (t >> RT5350_SYSCFG0_DRAM_SIZE_SHIFT) & + RT5350_SYSCFG0_DRAM_SIZE_MASK; + + switch (t) { + case RT5350_SYSCFG0_DRAM_SIZE_2M: + ret = 2 * 1024 * 1024; + break; + case RT5350_SYSCFG0_DRAM_SIZE_8M: + ret = 8 * 1024 * 1024; + break; + case RT5350_SYSCFG0_DRAM_SIZE_16M: + ret = 16 * 1024 * 1024; + break; + case RT5350_SYSCFG0_DRAM_SIZE_32M: + ret = 32 * 1024 * 1024; + break; + case RT5350_SYSCFG0_DRAM_SIZE_64M: + ret = 64 * 1024 * 1024; + break; + default: + panic("rt5350: invalid DRAM size: %u", t); + break; + } + + return ret; +} + +void __init ramips_soc_prom_init(void) +{ + void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE); + const char *name = "unknown"; + u32 n0; + u32 n1; + u32 id; + + n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0); + n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1); + + if (n0 == RT3052_CHIP_NAME0 && n1 == RT3052_CHIP_NAME1) { + unsigned long icache_sets; + + icache_sets = (read_c0_config1() >> 22) & 7; + if (icache_sets == 1) { + rt305x_soc = RT305X_SOC_RT3050; + name = "RT3050"; + } else { + rt305x_soc = RT305X_SOC_RT3052; + name = "RT3052"; + } + } else if (n0 == RT3350_CHIP_NAME0 && n1 == RT3350_CHIP_NAME1) { + rt305x_soc = RT305X_SOC_RT3350; + name = "RT3350"; + } else if (n0 == RT3352_CHIP_NAME0 && n1 == RT3352_CHIP_NAME1) { + rt305x_soc = RT305X_SOC_RT3352; + name = "RT3352"; + } else if (n0 == RT5350_CHIP_NAME0 && n1 == RT5350_CHIP_NAME1) { + rt305x_soc = RT305X_SOC_RT5350; + name = "RT5350"; + } else { + panic("rt305x: unknown SoC, n0:%08x n1:%08x\n", n0, n1); + } + + id = __raw_readl(sysc + SYSC_REG_CHIP_ID); + + snprintf(ramips_sys_type, RAMIPS_SYS_TYPE_LEN, + "Ralink %s id:%u rev:%u", + name, + (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK, + (id & CHIP_ID_REV_MASK)); + + ramips_mem_base = RT305X_SDRAM_BASE; + + if (soc_is_rt5350()) { + ramips_get_mem_size = rt5350_get_mem_size; + } else if (soc_is_rt305x() || soc_is_rt3350() ) { + ramips_mem_size_min = RT305X_MEM_SIZE_MIN; + ramips_mem_size_max = RT305X_MEM_SIZE_MAX; + } else if (soc_is_rt3352()) { + ramips_mem_size_min = RT3352_MEM_SIZE_MIN; + ramips_mem_size_max = RT3352_MEM_SIZE_MAX; + } else { + BUG(); + } +} + +static struct ramips_gpio_chip rt305x_gpio_chips[] = { + { + .chip = { + .label = "RT305X-GPIO0", + .base = 0, + .ngpio = 24, + }, + .regs = { + [RAMIPS_GPIO_REG_INT] = 0x00, + [RAMIPS_GPIO_REG_EDGE] = 0x04, + [RAMIPS_GPIO_REG_RENA] = 0x08, + [RAMIPS_GPIO_REG_FENA] = 0x0c, + [RAMIPS_GPIO_REG_DATA] = 0x20, + [RAMIPS_GPIO_REG_DIR] = 0x24, + [RAMIPS_GPIO_REG_POL] = 0x28, + [RAMIPS_GPIO_REG_SET] = 0x2c, + [RAMIPS_GPIO_REG_RESET] = 0x30, + [RAMIPS_GPIO_REG_TOGGLE] = 0x34, + }, + .map_base = RT305X_PIO_BASE, + .map_size = RT305X_PIO_SIZE, + }, + { + .chip = { + .label = "RT305X-GPIO1", + .base = 24, + .ngpio = 16, + }, + .regs = { + [RAMIPS_GPIO_REG_INT] = 0x38, + [RAMIPS_GPIO_REG_EDGE] = 0x3c, + [RAMIPS_GPIO_REG_RENA] = 0x40, + [RAMIPS_GPIO_REG_FENA] = 0x44, + [RAMIPS_GPIO_REG_DATA] = 0x48, + [RAMIPS_GPIO_REG_DIR] = 0x4c, + [RAMIPS_GPIO_REG_POL] = 0x50, + [RAMIPS_GPIO_REG_SET] = 0x54, + [RAMIPS_GPIO_REG_RESET] = 0x58, + [RAMIPS_GPIO_REG_TOGGLE] = 0x5c, + }, + .map_base = RT305X_PIO_BASE, + .map_size = RT305X_PIO_SIZE, + }, + { + .chip = { + .label = "RT305X-GPIO2", + .base = 40, + .ngpio = 12, + }, + .regs = { + [RAMIPS_GPIO_REG_INT] = 0x60, + [RAMIPS_GPIO_REG_EDGE] = 0x64, + [RAMIPS_GPIO_REG_RENA] = 0x68, + [RAMIPS_GPIO_REG_FENA] = 0x6c, + [RAMIPS_GPIO_REG_DATA] = 0x70, + [RAMIPS_GPIO_REG_DIR] = 0x74, + [RAMIPS_GPIO_REG_POL] = 0x78, + [RAMIPS_GPIO_REG_SET] = 0x7c, + [RAMIPS_GPIO_REG_RESET] = 0x80, + [RAMIPS_GPIO_REG_TOGGLE] = 0x84, + }, + .map_base = RT305X_PIO_BASE, + .map_size = RT305X_PIO_SIZE, + }, +}; + +static struct ramips_gpio_data rt305x_gpio_data = { + .chips = rt305x_gpio_chips, + .num_chips = ARRAY_SIZE(rt305x_gpio_chips), +}; + +static void rt305x_gpio_reserve(int first, int last) +{ + for (; first <= last; first++) + gpio_request(first, "reserved"); +} + +void __init rt305x_gpio_init(u32 mode) +{ + u32 t; + + rt305x_sysc_wr(mode, SYSC_REG_GPIO_MODE); + + ramips_gpio_init(&rt305x_gpio_data); + if ((mode & RT305X_GPIO_MODE_I2C) == 0) + rt305x_gpio_reserve(RT305X_GPIO_I2C_SD, RT305X_GPIO_I2C_SCLK); + + if ((mode & RT305X_GPIO_MODE_SPI) == 0) + rt305x_gpio_reserve(RT305X_GPIO_SPI_EN, RT305X_GPIO_SPI_CLK); + + t = mode >> RT305X_GPIO_MODE_UART0_SHIFT; + t &= RT305X_GPIO_MODE_UART0_MASK; + switch (t) { + case RT305X_GPIO_MODE_UARTF: + case RT305X_GPIO_MODE_PCM_UARTF: + case RT305X_GPIO_MODE_PCM_I2S: + case RT305X_GPIO_MODE_I2S_UARTF: + rt305x_gpio_reserve(RT305X_GPIO_7, RT305X_GPIO_14); + break; + case RT305X_GPIO_MODE_PCM_GPIO: + rt305x_gpio_reserve(RT305X_GPIO_10, RT305X_GPIO_14); + break; + case RT305X_GPIO_MODE_GPIO_UARTF: + case RT305X_GPIO_MODE_GPIO_I2S: + rt305x_gpio_reserve(RT305X_GPIO_7, RT305X_GPIO_10); + break; + } + + if ((mode & RT305X_GPIO_MODE_UART1) == 0) + rt305x_gpio_reserve(RT305X_GPIO_UART1_TXD, + RT305X_GPIO_UART1_RXD); + + if ((mode & RT305X_GPIO_MODE_JTAG) == 0) + rt305x_gpio_reserve(RT305X_GPIO_JTAG_TDO, RT305X_GPIO_JTAG_TDI); + + if ((mode & RT305X_GPIO_MODE_MDIO) == 0) + rt305x_gpio_reserve(RT305X_GPIO_MDIO_MDC, + RT305X_GPIO_MDIO_MDIO); + + if ((mode & RT305X_GPIO_MODE_SDRAM) == 0) + rt305x_gpio_reserve(RT305X_GPIO_SDRAM_MD16, + RT305X_GPIO_SDRAM_MD31); + + if ((mode & RT305X_GPIO_MODE_RGMII) == 0) + rt305x_gpio_reserve(RT305X_GPIO_GE0_TXD0, + RT305X_GPIO_GE0_RXCLK); +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/setup.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/setup.c new file mode 100644 index 0000000000..5a069db454 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt305x/setup.c @@ -0,0 +1,88 @@ +/* + * Ralink RT305x SoC specific setup + * + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/clk.h> + +#include <asm/mips_machine.h> +#include <asm/reboot.h> +#include <asm/time.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/rt305x.h> +#include <asm/mach-ralink/rt305x_regs.h> +#include "common.h" + +static void rt305x_restart(char *command) +{ + rt305x_sysc_wr(RT305X_RESET_SYSTEM, SYSC_REG_RESET_CTRL); + while (1) + if (cpu_wait) + cpu_wait(); +} + +static void rt305x_halt(void) +{ + while (1) + if (cpu_wait) + cpu_wait(); +} + +unsigned int __cpuinit get_c0_compare_irq(void) +{ + return CP0_LEGACY_COMPARE_IRQ; +} + +void __init ramips_soc_setup(void) +{ + struct clk *clk; + + rt305x_sysc_base = ioremap_nocache(RT305X_SYSC_BASE, PAGE_SIZE); + rt305x_memc_base = ioremap_nocache(RT305X_MEMC_BASE, PAGE_SIZE); + + rt305x_clocks_init(); + + clk = clk_get(NULL, "cpu"); + if (IS_ERR(clk)) + panic("unable to get CPU clock, err=%ld", PTR_ERR(clk)); + + printk(KERN_INFO "%s running at %lu.%02lu MHz\n", ramips_sys_type, + clk_get_rate(clk) / 1000000, + (clk_get_rate(clk) % 1000000) * 100 / 1000000); + + _machine_restart = rt305x_restart; + _machine_halt = rt305x_halt; + pm_power_off = rt305x_halt; + + clk = clk_get(NULL, "uart"); + if (IS_ERR(clk)) + panic("unable to get UART clock, err=%ld", PTR_ERR(clk)); + + ramips_early_serial_setup(0, RT305X_UART0_BASE, clk_get_rate(clk), + RT305X_INTC_IRQ_UART0); + ramips_early_serial_setup(1, RT305X_UART1_BASE, clk_get_rate(clk), + RT305X_INTC_IRQ_UART1); +} + +void __init plat_time_init(void) +{ + struct clk *clk; + + clk = clk_get(NULL, "cpu"); + if (IS_ERR(clk)) + panic("unable to get CPU clock, err=%ld", PTR_ERR(clk)); + + mips_hpt_frequency = clk_get_rate(clk) / 2; +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/Kconfig b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/Kconfig new file mode 100644 index 0000000000..57823f0c67 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/Kconfig @@ -0,0 +1,34 @@ +if RALINK_RT3883 + +menu "Ralink RT3662/RT3883 machine selection" + +config RT3883_MACH_RT_N56U + bool "Asus RT-N56U support" + select HW_HAS_PCI + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT3883_MACH_DIR_645 + bool "D-Link DIR-645 support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT3883_MACH_OMNI_EMB_HPM + bool "Omnima EMB HPM board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT3883_MACH_TEW_691GR + bool "TRENDnet TEW-691GR support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +config RT3883_MACH_TEW_692GR + bool "TRENDnet TEW-692GR support" + select HW_HAS_PCI + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + +endmenu + +endif diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/Makefile b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/Makefile new file mode 100644 index 0000000000..e1ab61e814 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/Makefile @@ -0,0 +1,18 @@ +# +# Makefile for the Ralink RT3662/RT3883 SoC specific parts of the kernel +# +# Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License version 2 as published +# by the Free Software Foundation. + +obj-y := irq.o setup.o devices.o rt3883.o clock.o + +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + +obj-$(CONFIG_RT3883_MACH_DIR_645) += mach-dir-645.o +obj-$(CONFIG_RT3883_MACH_OMNI_EMB_HPM) += mach-omni-emb-hpm.o +obj-$(CONFIG_RT3883_MACH_RT_N56U) += mach-rt-n56u.o +obj-$(CONFIG_RT3883_MACH_TEW_691GR) += mach-tew-691gr.o +obj-$(CONFIG_RT3883_MACH_TEW_692GR) += mach-tew-692gr.o diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/clock.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/clock.c new file mode 100644 index 0000000000..bf70259cae --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/clock.c @@ -0,0 +1,103 @@ +/* + * Ralink RT3662/RT3883 clock API + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/clk.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_regs.h> +#include "common.h" + +struct clk { + unsigned long rate; +}; + +static struct clk rt3883_cpu_clk; +static struct clk rt3883_sys_clk; +static struct clk rt3883_wdt_clk; +static struct clk rt3883_uart_clk; + +void __init rt3883_clocks_init(void) +{ + u32 syscfg0; + u32 clksel; + u32 ddr2; + + syscfg0 = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG0); + clksel = ((syscfg0 >> RT3883_SYSCFG0_CPUCLK_SHIFT) & + RT3883_SYSCFG0_CPUCLK_MASK); + ddr2 = syscfg0 & RT3883_SYSCFG0_DRAM_TYPE_DDR2; + + switch (clksel) { + case RT3883_SYSCFG0_CPUCLK_250: + rt3883_cpu_clk.rate = 250000000; + rt3883_sys_clk.rate = (ddr2) ? 125000000 : 83000000; + break; + case RT3883_SYSCFG0_CPUCLK_384: + rt3883_cpu_clk.rate = 384000000; + rt3883_sys_clk.rate = (ddr2) ? 128000000 : 96000000; + break; + case RT3883_SYSCFG0_CPUCLK_480: + rt3883_cpu_clk.rate = 480000000; + rt3883_sys_clk.rate = (ddr2) ? 160000000 : 120000000; + break; + case RT3883_SYSCFG0_CPUCLK_500: + rt3883_cpu_clk.rate = 500000000; + rt3883_sys_clk.rate = (ddr2) ? 166000000 : 125000000; + break; + } + + rt3883_wdt_clk.rate = rt3883_sys_clk.rate; + rt3883_uart_clk.rate = 40000000; +} + +struct clk *clk_get(struct device *dev, const char *id) +{ + if (!strcmp(id, "sys")) + return &rt3883_sys_clk; + + if (!strcmp(id, "cpu")) + return &rt3883_cpu_clk; + + if (!strcmp(id, "wdt")) + return &rt3883_wdt_clk; + + if (!strcmp(id, "uart")) + return &rt3883_uart_clk; + + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/common.h b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/common.h new file mode 100644 index 0000000000..a389dccce0 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/common.h @@ -0,0 +1,16 @@ +/* + * Ralink RT3662/RT3883 SoC common defines + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT3883_COMMON_H +#define _RT3883_COMMON_H + +void rt3883_clocks_init(void); + +#endif /* _RT3883_COMMON_H */
\ No newline at end of file diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/devices.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/devices.c new file mode 100644 index 0000000000..6077e97dda --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/devices.c @@ -0,0 +1,398 @@ +/* + * Ralink RT3662/RT3883 SoC platform device registration + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/partitions.h> +#include <linux/dma-mapping.h> +#include <linux/spi/spi.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/rt2x00_platform.h> +#include <linux/usb/ehci_pdriver.h> +#include <linux/usb/ohci_pdriver.h> + +#include <asm/addrspace.h> + +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_regs.h> +#include <asm/mach-ralink/ramips_nand_platform.h> +#include "devices.h" + +#include <ramips_eth_platform.h> + +static struct resource rt3883_flash0_resources[] = { + { + .flags = IORESOURCE_MEM, + .start = RT3883_BOOT_BASE, + .end = RT3883_BOOT_BASE + RT3883_BOOT_SIZE - 1, + }, +}; + +struct physmap_flash_data rt3883_flash0_data; +static struct platform_device rt3883_flash0_device = { + .name = "physmap-flash", + .resource = rt3883_flash0_resources, + .num_resources = ARRAY_SIZE(rt3883_flash0_resources), + .dev = { + .platform_data = &rt3883_flash0_data, + }, +}; + +static struct resource rt3883_flash1_resources[] = { + { + .flags = IORESOURCE_MEM, + .start = RT3883_SRAM_BASE, + .end = RT3883_SRAM_BASE + RT3883_SRAM_SIZE - 1, + }, +}; + +struct physmap_flash_data rt3883_flash1_data; +static struct platform_device rt3883_flash1_device = { + .name = "physmap-flash", + .resource = rt3883_flash1_resources, + .num_resources = ARRAY_SIZE(rt3883_flash1_resources), + .dev = { + .platform_data = &rt3883_flash1_data, + }, +}; + +static int rt3883_flash_instance __initdata; +void __init rt3883_register_pflash(unsigned int id) +{ + struct platform_device *pdev; + struct physmap_flash_data *pdata; + void __iomem *fscc_base; + u32 t; + int reg; + + switch (id) { + case 0: + pdev = &rt3883_flash0_device; + reg = RT3883_FSCC_REG_FLASH_CFG0; + break; + case 1: + pdev = &rt3883_flash1_device; + reg = RT3883_FSCC_REG_FLASH_CFG1; + break; + default: + return; + } + + pdata = pdev->dev.platform_data; + + fscc_base = ioremap(RT3883_FSCC_BASE, RT3883_FSCC_SIZE); + if (!fscc_base) + panic("RT3883: ioremap failed for FSCC"); + + t = __raw_readl(fscc_base + reg); + iounmap(fscc_base); + + t = (t >> RT3883_FLASH_CFG_WIDTH_SHIFT) & RT3883_FLASH_CFG_WIDTH_MASK; + switch (t) { + case RT3883_FLASH_CFG_WIDTH_8BIT: + pdata->width = 1; + break; + case RT3883_FLASH_CFG_WIDTH_16BIT: + pdata->width = 2; + break; + case RT3883_FLASH_CFG_WIDTH_32BIT: + if (id == 1) { + pdata->width = 4; + break; + } + /* fallthrough */ + default: + pr_warn("RT3883: flash bank%d: invalid width detected\n", id); + return; + } + + pdev->id = rt3883_flash_instance; + + platform_device_register(pdev); + rt3883_flash_instance++; +} + +static atomic_t rt3883_usb_pwr_ref = ATOMIC_INIT(0); + +static int rt3883_usb_power_on(struct platform_device *pdev) +{ + + if (atomic_inc_return(&rt3883_usb_pwr_ref) == 1) { + u32 t; + + t = rt3883_sysc_rr(RT3883_SYSC_REG_USB_PS); + + /* enable clock for port0's and port1's phys */ + t = rt3883_sysc_rr(RT3883_SYSC_REG_CLKCFG1); + t |= RT3883_CLKCFG1_UPHY0_CLK_EN | RT3883_CLKCFG1_UPHY1_CLK_EN; + rt3883_sysc_wr(t, RT3883_SYSC_REG_CLKCFG1); + mdelay(500); + + /* pull USBHOST and USBDEV out from reset */ + t = rt3883_sysc_rr(RT3883_SYSC_REG_RSTCTRL); + t &= ~(RT3883_RSTCTRL_UHST | RT3883_RSTCTRL_UDEV); + rt3883_sysc_wr(t, RT3883_SYSC_REG_RSTCTRL); + mdelay(500); + + /* enable host mode */ + t = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG1); + t |= RT3883_SYSCFG1_USB0_HOST_MODE; + rt3883_sysc_wr(t, RT3883_SYSC_REG_SYSCFG1); + + t = rt3883_sysc_rr(RT3883_SYSC_REG_USB_PS); + } + + return 0; +} + +static void rt3883_usb_power_off(struct platform_device *pdev) +{ + if (atomic_dec_return(&rt3883_usb_pwr_ref) == 0) { + u32 t; + + /* put USBHOST and USBDEV into reset */ + t = rt3883_sysc_rr(RT3883_SYSC_REG_RSTCTRL); + t |= RT3883_RSTCTRL_UHST | RT3883_RSTCTRL_UDEV; + rt3883_sysc_wr(t, RT3883_SYSC_REG_RSTCTRL); + udelay(10000); + + /* disable clock for port0's and port1's phys*/ + t = rt3883_sysc_rr(RT3883_SYSC_REG_CLKCFG1); + t &= ~(RT3883_CLKCFG1_UPHY0_CLK_EN | + RT3883_CLKCFG1_UPHY1_CLK_EN); + rt3883_sysc_wr(t, RT3883_SYSC_REG_CLKCFG1); + udelay(10000); + } +} + +static struct usb_ehci_pdata rt3883_ehci_data = { + .power_on = rt3883_usb_power_on, + .power_off = rt3883_usb_power_off, +}; + +static struct resource rt3883_ehci_resources[] = { + { + .start = RT3883_EHCI_BASE, + .end = RT3883_EHCI_BASE + PAGE_SIZE - 1, + .flags = IORESOURCE_MEM, + }, { + .start = RT3883_INTC_IRQ_UHST, + .end = RT3883_INTC_IRQ_UHST, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 rt3883_ehci_dmamask = DMA_BIT_MASK(32); +static struct platform_device rt3883_ehci_device = { + .name = "ehci-platform", + .id = -1, + .resource = rt3883_ehci_resources, + .num_resources = ARRAY_SIZE(rt3883_ehci_resources), + .dev = { + .dma_mask = &rt3883_ehci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &rt3883_ehci_data, + }, +}; + +static struct resource rt3883_ohci_resources[] = { + { + .start = RT3883_OHCI_BASE, + .end = RT3883_OHCI_BASE + PAGE_SIZE - 1, + .flags = IORESOURCE_MEM, + }, { + .start = RT3883_INTC_IRQ_UHST, + .end = RT3883_INTC_IRQ_UHST, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct usb_ohci_pdata rt3883_ohci_data = { + .power_on = rt3883_usb_power_on, + .power_off = rt3883_usb_power_off, +}; + +static u64 rt3883_ohci_dmamask = DMA_BIT_MASK(32); +static struct platform_device rt3883_ohci_device = { + .name = "ohci-platform", + .id = -1, + .resource = rt3883_ohci_resources, + .num_resources = ARRAY_SIZE(rt3883_ohci_resources), + .dev = { + .dma_mask = &rt3883_ohci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &rt3883_ohci_data, + }, +}; + +void __init rt3883_register_usbhost(void) +{ + platform_device_register(&rt3883_ehci_device); + platform_device_register(&rt3883_ohci_device); +} + +static void rt3883_fe_reset(void) +{ + u32 t; + + t = rt3883_sysc_rr(RT3883_SYSC_REG_RSTCTRL); + t |= RT3883_RSTCTRL_FE; + rt3883_sysc_wr(t , RT3883_SYSC_REG_RSTCTRL); + + t &= ~RT3883_RSTCTRL_FE; + rt3883_sysc_wr(t, RT3883_SYSC_REG_RSTCTRL); +} + +static struct resource rt3883_eth_resources[] = { + { + .start = RT3883_FE_BASE, + .end = RT3883_FE_BASE + PAGE_SIZE - 1, + .flags = IORESOURCE_MEM, + }, { + .start = RT3883_CPU_IRQ_FE, + .end = RT3883_CPU_IRQ_FE, + .flags = IORESOURCE_IRQ, + }, +}; + +struct ramips_eth_platform_data rt3883_eth_data = { + .mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 }, + .reset_fe = rt3883_fe_reset, + .min_pkt_len = 64, +}; + +static struct platform_device rt3883_eth_device = { + .name = "ramips_eth", + .resource = rt3883_eth_resources, + .num_resources = ARRAY_SIZE(rt3883_eth_resources), + .dev = { + .platform_data = &rt3883_eth_data, + } +}; + +void __init rt3883_register_ethernet(void) +{ + struct clk *clk; + + clk = clk_get(NULL, "sys"); + if (IS_ERR(clk)) + panic("unable to get SYS clock, err=%ld", PTR_ERR(clk)); + + rt3883_eth_data.sys_freq = clk_get_rate(clk); + + platform_device_register(&rt3883_eth_device); +} + +static struct resource rt3883_wlan_resources[] = { + { + .start = RT3883_WLAN_BASE, + .end = RT3883_WLAN_BASE + 0x3FFFF, + .flags = IORESOURCE_MEM, + }, { + .start = RT3883_CPU_IRQ_WLAN, + .end = RT3883_CPU_IRQ_WLAN, + .flags = IORESOURCE_IRQ, + }, +}; + +struct rt2x00_platform_data rt3883_wlan_data; +static struct platform_device rt3883_wlan_device = { + .name = "rt2800_wmac", + .resource = rt3883_wlan_resources, + .num_resources = ARRAY_SIZE(rt3883_wlan_resources), + .dev = { + .platform_data = &rt3883_wlan_data, + } +}; + +void __init rt3883_register_wlan(void) +{ + rt3883_wlan_data.eeprom_file_name = "soc_wmac.eeprom", + platform_device_register(&rt3883_wlan_device); +} + +static struct resource rt3883_wdt_resources[] = { + { + .start = RT3883_TIMER_BASE, + .end = RT3883_TIMER_BASE + RT3883_TIMER_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device rt3883_wdt_device = { + .name = "ramips-wdt", + .id = -1, + .resource = rt3883_wdt_resources, + .num_resources = ARRAY_SIZE(rt3883_wdt_resources), +}; + +void __init rt3883_register_wdt(bool enable_reset) +{ + if (enable_reset) { + u32 t; + + /* enable WDT reset output on GPIO 2 */ + t = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG1); + t |= RT3883_SYSCFG1_GPIO2_AS_WDT_OUT; + rt3883_sysc_wr(t, RT3883_SYSC_REG_SYSCFG1); + } + + platform_device_register(&rt3883_wdt_device); +} + +static struct resource rt3883_nand_resources[] = { + { + .flags = IORESOURCE_MEM, + .start = RT3883_NANDC_BASE, + .end = RT3883_NANDC_BASE + RT3883_NANDC_SIZE - 1, + }, +}; + +struct ramips_nand_platform_data rt3883_nand_data; +static struct platform_device rt3883_nand_device = { + .name = RAMIPS_NAND_DRIVER_NAME, + .id = -1, + .resource = rt3883_nand_resources, + .num_resources = ARRAY_SIZE(rt3883_nand_resources), + .dev = { + .platform_data = &rt3883_nand_data, + }, +}; + +void __init rt3883_register_nand(void) +{ + platform_device_register(&rt3883_nand_device); +} + +static struct resource rt3883_spi_resources[] = { + { + .flags = IORESOURCE_MEM, + .start = RT3883_SPI_BASE, + .end = RT3883_SPI_BASE + RT3883_SPI_SIZE - 1, + }, +}; + +static struct platform_device rt3883_spi_device = { + .name = "ramips-spi", + .id = 0, + .resource = rt3883_spi_resources, + .num_resources = ARRAY_SIZE(rt3883_spi_resources), +}; + +void __init rt3883_register_spi(struct spi_board_info *info, int n) +{ + spi_register_board_info(info, n); + platform_device_register(&rt3883_spi_device); +} + diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/devices.h b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/devices.h new file mode 100644 index 0000000000..808bcb2d36 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/devices.h @@ -0,0 +1,34 @@ +/* + * Ralink RT3662/3883 SoC specific platform device definitions + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _RT3883_DEVICES_H +#define _RT3883_DEVICES_H + +struct physmap_flash_data; +struct spi_board_info; + +extern struct physmap_flash_data rt3883_flash0_data; +extern struct physmap_flash_data rt3883_flash1_data; +void rt3883_register_pflash(unsigned int id); + +extern struct ramips_nand_platform_data rt3883_nand_data; +void rt3883_register_nand(void); + +extern struct ramips_eth_platform_data rt3883_eth_data; +void rt3883_register_ethernet(void); +void rt3883_register_usbhost(void); + +extern struct rt2x00_platform_data rt3883_wlan_data; +void rt3883_register_wlan(void); +void rt3883_register_wdt(bool enable_reset); + +void rt3883_register_spi(struct spi_board_info *info, int n); + +#endif /* _RT3883_DEVICES_H */ diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/early_printk.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/early_printk.c new file mode 100644 index 0000000000..e3bf7ba339 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/early_printk.c @@ -0,0 +1,29 @@ +/* + * Ralink RT3662/RT3883 SoC early printk support + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/io.h> +#include <linux/serial_reg.h> + +#include <asm/addrspace.h> + +#include <asm/mach-ralink/rt3883_regs.h> + +#define UART_READ(r) \ + __raw_readl((void __iomem *)(KSEG1ADDR(RT3883_UART1_BASE) + 4 * (r))) + +#define UART_WRITE(r, v) \ + __raw_writel((v), (void __iomem *)(KSEG1ADDR(RT3883_UART1_BASE) + 4 * (r))) + +void prom_putchar(unsigned char ch) +{ + while (((UART_READ(RT3883_UART_REG_LSR)) & UART_LSR_THRE) == 0); + UART_WRITE(RT3883_UART_REG_TX, ch); + while (((UART_READ(RT3883_UART_REG_LSR)) & UART_LSR_THRE) == 0); +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/irq.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/irq.c new file mode 100644 index 0000000000..b561fd38cd --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/irq.c @@ -0,0 +1,84 @@ +/* + * Ralink RT3662/RT3883 SoC specific interrupt handling + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> + +#include <asm/irq_cpu.h> +#include <asm/mipsregs.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_regs.h> + +static void rt3883_intc_irq_dispatch(void) +{ + u32 pending; + + pending = ramips_intc_get_status(); + + if (pending & RT3883_INTC_INT_TIMER0) + do_IRQ(RT3883_INTC_IRQ_TIMER0); + + else if (pending & RT3883_INTC_INT_TIMER1) + do_IRQ(RT3883_INTC_IRQ_TIMER1); + + else if (pending & RT3883_INTC_INT_UART0) + do_IRQ(RT3883_INTC_IRQ_UART0); + + else if (pending & RT3883_INTC_INT_UART1) + do_IRQ(RT3883_INTC_IRQ_UART1); + + else if (pending & RT3883_INTC_INT_PERFC) + do_IRQ(RT3883_INTC_IRQ_PERFC); + + else if (pending & RT3883_INTC_INT_UHST) + do_IRQ(RT3883_INTC_IRQ_UHST); + + /* TODO: handle PIO interrupts as well */ + + else + spurious_interrupt(); +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned long pending; + + pending = read_c0_status() & read_c0_cause() & ST0_IM; + + if (pending & STATUSF_IP7) + do_IRQ(RT3883_CPU_IRQ_COUNTER); + + else if (pending & STATUSF_IP5) + do_IRQ(RT3883_CPU_IRQ_FE); + + else if (pending & STATUSF_IP6) + do_IRQ(RT3883_CPU_IRQ_WLAN); + + else if (pending & STATUSF_IP4) + do_IRQ(RT3883_CPU_IRQ_PCI); + + else if (pending & STATUSF_IP2) + rt3883_intc_irq_dispatch(); + + else + spurious_interrupt(); +} + +void __init arch_init_irq(void) +{ + mips_cpu_irq_init(); + ramips_intc_irq_init(RT3883_INTC_BASE, RT3883_CPU_IRQ_INTC, + RT3883_INTC_IRQ_BASE); + cp0_perfcount_irq = RT3883_INTC_IRQ_PERFC; +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-dir-645.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-dir-645.c new file mode 100644 index 0000000000..825da27f77 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-dir-645.c @@ -0,0 +1,152 @@ +/* + * D-Link DIR-645 board support + * + * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/rtl8367.h> +#include <linux/ethtool.h> +#include <linux/rt2x00_platform.h> +#include <linux/spi/spi.h> +#include <linux/gpio.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_regs.h> +#include <asm/mach-ralink/ramips_eth_platform.h> + +#include "devices.h" + +#define DIR_645_GPIO_LED_INET 0 +#define DIR_645_GPIO_LED_WPS 26 + +#define DIR_645_GPIO_BUTTON_RESET 9 +#define DIR_645_GPIO_BUTTON_WPS 14 + +#define DIR_645_GPIO_USB_POWER 30 + +#define DIR_645_GPIO_RTL8367_SCK 2 +#define DIR_645_GPIO_RTL8367_SDA 1 + +#define DIR_645_KEYS_POLL_INTERVAL 20 +#define DIR_645_KEYS_DEBOUNCE_INTERVAL (3 * DIR_645_KEYS_POLL_INTERVAL) + +static struct gpio_led dir_645_leds_gpio[] __initdata = { + { + .name = "d-link:green:inet", + .gpio = DIR_645_GPIO_LED_INET, + .active_low = 1, + }, + { + .name = "d-link:green:wps", + .gpio = DIR_645_GPIO_LED_WPS, + .active_low = 1, + }, +}; + +static struct gpio_keys_button dir_645_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DIR_645_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_645_GPIO_BUTTON_RESET, + .active_low = 1, + }, + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DIR_645_KEYS_DEBOUNCE_INTERVAL, + .gpio = DIR_645_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static struct rtl8367_extif_config dir_645_rtl8367_extif1_cfg = { + .txdelay = 1, + .rxdelay = 0, + .mode = RTL8367_EXTIF_MODE_RGMII, + .ability = { + .force_mode = 1, + .txpause = 1, + .rxpause = 1, + .link = 1, + .duplex = 1, + .speed = RTL8367_PORT_SPEED_1000, + } +}; + +static struct rtl8367_platform_data dir_645_rtl8367_data = { + .gpio_sda = DIR_645_GPIO_RTL8367_SDA, + .gpio_sck = DIR_645_GPIO_RTL8367_SCK, + .extif1_cfg = &dir_645_rtl8367_extif1_cfg, +}; + +static struct platform_device dir_645_rtl8367_device = { + .name = RTL8367B_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &dir_645_rtl8367_data, + } +}; + +static struct spi_board_info dir_645_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "m25p80", + } +}; + +static void __init dir_645_gpio_init(void) +{ + rt3883_gpio_init(RT3883_GPIO_MODE_I2C | + RT3883_GPIO_MODE_UART0(RT3883_GPIO_MODE_GPIO) | + RT3883_GPIO_MODE_JTAG | + RT3883_GPIO_MODE_PCI(RT3883_GPIO_MODE_PCI_FNC)); + + gpio_request_one(DIR_645_GPIO_USB_POWER, + GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, + "USB power"); +} + +static void __init dir_645_init(void) +{ + dir_645_gpio_init(); + + rt3883_register_spi(dir_645_spi_info, + ARRAY_SIZE(dir_645_spi_info)); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_645_leds_gpio), + dir_645_leds_gpio); + + ramips_register_gpio_buttons(-1, DIR_645_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dir_645_gpio_buttons), + dir_645_gpio_buttons); + + platform_device_register(&dir_645_rtl8367_device); + + rt3883_wlan_data.disable_5ghz = 1; + rt3883_register_wlan(); + + rt3883_eth_data.speed = SPEED_1000; + rt3883_eth_data.duplex = DUPLEX_FULL; + rt3883_eth_data.tx_fc = 1; + rt3883_eth_data.rx_fc = 1; + rt3883_register_ethernet(); + + rt3883_register_wdt(false); + rt3883_register_usbhost(); +} + +MIPS_MACHINE(RAMIPS_MACH_DIR_645, "DIR-645", "D-Link DIR-645", dir_645_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-omni-emb-hpm.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-omni-emb-hpm.c new file mode 100644 index 0000000000..77ccff624f --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-omni-emb-hpm.c @@ -0,0 +1,157 @@ +/* + * Omnima EMB HPM board support + * + * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ethtool.h> +#include <linux/gpio.h> +#include <linux/rt2x00_platform.h> +#include <linux/spi/spi.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_regs.h> +#include <asm/mach-ralink/ramips_eth_platform.h> + +#include "devices.h" + +#define OMNI_EMB_HPM_GPIO_LED_POWER 7 +#define OMNI_EMB_HPM_GPIO_LED_ETH_GREEN 20 +#define OMNI_EMB_HPM_GPIO_LED_ETH_RED 18 +#define OMNI_EMB_HPM_GPIO_LED_STATUS 21 +#define OMNI_EMB_HPM_GPIO_LED_WIFI_GREEN 17 +#define OMNI_EMB_HPM_GPIO_LED_WIFI_RED 19 + +#define OMNI_EMB_HPM_GPIO_BUTTON_RESET 14 + +#define OMNI_EMB_HPM_GPIO_USB0_ENABLE 2 +#define OMNI_EMB_HPM_GPIO_USB1_ENABLE 1 +#define OMNI_EMB_HPM_GPIO_USB0_OC 12 +#define OMNI_EMB_HPM_GPIO_USB1_OC 13 + +#define OMNI_EMB_HPM_KEYS_POLL_INTERVAL 20 +#define OMNI_EMB_HPM_KEYS_DEBOUNCE_INTERVAL (3 * OMNI_EMB_HPM_KEYS_POLL_INTERVAL) + +static struct gpio_led omni_emb_hpm_leds_gpio[] __initdata = { + { + .name = "emb:orange:power", + .gpio = OMNI_EMB_HPM_GPIO_LED_POWER, + .active_low = 1, + }, + { + .name = "emb:green:status", + .gpio = OMNI_EMB_HPM_GPIO_LED_STATUS, + }, + { + .name = "emb:green:eth", + .gpio = OMNI_EMB_HPM_GPIO_LED_ETH_GREEN, + .active_low = 1, + }, + { + .name = "emb:red:eth", + .gpio = OMNI_EMB_HPM_GPIO_LED_ETH_RED, + .active_low = 1, + }, + { + .name = "emb:green:wifi", + .gpio = OMNI_EMB_HPM_GPIO_LED_WIFI_GREEN, + .active_low = 1, + }, + { + .name = "emb:red:wifi", + .gpio = OMNI_EMB_HPM_GPIO_LED_WIFI_RED, + .active_low = 1, + }, +}; + +static struct gpio_keys_button omni_emb_hpm_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = OMNI_EMB_HPM_KEYS_DEBOUNCE_INTERVAL, + .gpio = OMNI_EMB_HPM_GPIO_BUTTON_RESET, + .active_low = 1, + }, +}; + +static struct spi_board_info omni_emb_hpm_spi_info[] = { + { + .bus_num = 0, + .chip_select = 0, + .max_speed_hz = 25000000, + .modalias = "m25p80", + } +}; + + +static void __init omni_emb_hpm_gpio_request(unsigned int gpio, + unsigned long flags, + const char *label, + bool free) +{ + int err; + + err = gpio_request_one(gpio, flags, label); + if (err) { + pr_err("EMB_HPM: can't setup GPIO%u (%s), err=%d\n", + gpio, label, err); + return; + } + + if (free) + gpio_free(gpio); +} + +static void __init omni_emb_hpm_gpio_init(void) +{ + rt3883_gpio_init(RT3883_GPIO_MODE_I2C | + RT3883_GPIO_MODE_UART0(RT3883_GPIO_MODE_GPIO) | + RT3883_GPIO_MODE_JTAG); + + omni_emb_hpm_gpio_request(OMNI_EMB_HPM_GPIO_USB0_ENABLE, + GPIOF_OUT_INIT_HIGH, + "USB0 power", true); + omni_emb_hpm_gpio_request(OMNI_EMB_HPM_GPIO_USB1_ENABLE, + GPIOF_OUT_INIT_HIGH, + "USB1 power", true); + omni_emb_hpm_gpio_request(OMNI_EMB_HPM_GPIO_USB0_OC, + GPIOF_IN, "USB0 OC", false); + omni_emb_hpm_gpio_request(OMNI_EMB_HPM_GPIO_USB1_OC, + GPIOF_IN, "USB1 OC", false); +} + +static void __init omni_emb_hpm_init(void) +{ + omni_emb_hpm_gpio_init(); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(omni_emb_hpm_leds_gpio), + omni_emb_hpm_leds_gpio); + + ramips_register_gpio_buttons(-1, OMNI_EMB_HPM_KEYS_POLL_INTERVAL, + ARRAY_SIZE(omni_emb_hpm_gpio_buttons), + omni_emb_hpm_gpio_buttons); + + rt3883_register_spi(omni_emb_hpm_spi_info, + ARRAY_SIZE(omni_emb_hpm_spi_info)); + + rt3883_register_wlan(); + + rt3883_eth_data.phy_mask = BIT(4); + rt3883_register_ethernet(); + + rt3883_register_wdt(false); + rt3883_register_usbhost(); +} + +MIPS_MACHINE(RAMIPS_MACH_OMNI_EMB_HPM, "OMNI-EMB-HPM", "Omnima EMB HPM", + omni_emb_hpm_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-rt-n56u.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-rt-n56u.c new file mode 100644 index 0000000000..99aa03fe9e --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-rt-n56u.c @@ -0,0 +1,155 @@ +/* + * Asus RT-N56U board support + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/rtl8367.h> +#include <linux/ethtool.h> +#include <linux/pci.h> +#include <linux/rt2x00_platform.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_regs.h> +#include <asm/mach-ralink/ramips_eth_platform.h> + +#include "devices.h" + +#define RT_N56U_GPIO_LED_POWER 0 +#define RT_N56U_GPIO_LED_LAN 19 +#define RT_N56U_GPIO_LED_USB 24 +#define RT_N56U_GPIO_LED_WAN 27 +#define RT_N56U_GPIO_BUTTON_RESET 13 +#define RT_N56U_GPIO_BUTTON_WPS 26 + +#define RT_N56U_GPIO_RTL8367_SCK 2 +#define RT_N56U_GPIO_RTL8367_SDA 1 + +#define RT_N56U_KEYS_POLL_INTERVAL 20 +#define RT_N56U_KEYS_DEBOUNCE_INTERVAL (3 * RT_N56U_KEYS_POLL_INTERVAL) + +static struct gpio_led rt_n56u_leds_gpio[] __initdata = { + { + .name = "asus:blue:power", + .gpio = RT_N56U_GPIO_LED_POWER, + .active_low = 1, + }, + { + .name = "asus:blue:lan", + .gpio = RT_N56U_GPIO_LED_LAN, + .active_low = 1, + }, + { + .name = "asus:blue:wan", + .gpio = RT_N56U_GPIO_LED_WAN, + .active_low = 1, + }, + { + .name = "asus:blue:usb", + .gpio = RT_N56U_GPIO_LED_USB, + .active_low = 1, + }, +}; + +static struct gpio_keys_button rt_n56u_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = RT_N56U_KEYS_DEBOUNCE_INTERVAL, + .gpio = RT_N56U_GPIO_BUTTON_RESET, + .active_low = 1, + }, + { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = RT_N56U_KEYS_DEBOUNCE_INTERVAL, + .gpio = RT_N56U_GPIO_BUTTON_WPS, + .active_low = 1, + } +}; + +static struct rtl8367_extif_config rt_n56u_rtl8367_extif1_cfg = { + .txdelay = 1, + .rxdelay = 0, + .mode = RTL8367_EXTIF_MODE_RGMII, + .ability = { + .force_mode = 1, + .txpause = 1, + .rxpause = 1, + .link = 1, + .duplex = 1, + .speed = RTL8367_PORT_SPEED_1000, + } +}; + +static struct rtl8367_platform_data rt_n56u_rtl8367_data = { + .gpio_sda = RT_N56U_GPIO_RTL8367_SDA, + .gpio_sck = RT_N56U_GPIO_RTL8367_SCK, + .extif1_cfg = &rt_n56u_rtl8367_extif1_cfg, +}; + +static struct platform_device rt_n56u_rtl8367_device = { + .name = RTL8367_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &rt_n56u_rtl8367_data, + } +}; + +static struct rt2x00_platform_data rt_n56u_pci_wlan_data = { + .eeprom_file_name = "rt2x00pci_1_0.eeprom", +}; + +static int rt_n56u_pci_plat_dev_init(struct pci_dev *dev) +{ + if (dev->bus->number == 1 && PCI_SLOT(dev->devfn) == 0) + dev->dev.platform_data = &rt_n56u_pci_wlan_data; + + return 0; +} + +static void __init rt_n56u_init(void) +{ + rt3883_gpio_init(RT3883_GPIO_MODE_I2C | + RT3883_GPIO_MODE_UART0(RT3883_GPIO_MODE_GPIO) | + RT3883_GPIO_MODE_JTAG | + RT3883_GPIO_MODE_PCI(RT3883_GPIO_MODE_PCI_FNC)); + + rt3883_register_pflash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n56u_leds_gpio), + rt_n56u_leds_gpio); + + ramips_register_gpio_buttons(-1, RT_N56U_KEYS_POLL_INTERVAL, + ARRAY_SIZE(rt_n56u_gpio_buttons), + rt_n56u_gpio_buttons); + + platform_device_register(&rt_n56u_rtl8367_device); + + rt3883_wlan_data.disable_2ghz = 1; + rt3883_register_wlan(); + + rt3883_eth_data.speed = SPEED_1000; + rt3883_eth_data.duplex = DUPLEX_FULL; + rt3883_eth_data.tx_fc = 1; + rt3883_eth_data.rx_fc = 1; + rt3883_register_ethernet(); + + rt3883_register_wdt(false); + rt3883_register_usbhost(); + rt3883_pci_set_plat_dev_init(rt_n56u_pci_plat_dev_init); + rt3883_pci_init(RT3883_PCI_MODE_PCIE); +} + +MIPS_MACHINE(RAMIPS_MACH_RT_N56U, "RT-N56U", "Asus RT-N56U", rt_n56u_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-tew-691gr.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-tew-691gr.c new file mode 100644 index 0000000000..7b553ab6b2 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-tew-691gr.c @@ -0,0 +1,103 @@ +/* + * TRENDnet TEW-691GR board support + * + * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ethtool.h> +#include <linux/pci.h> +#include <linux/phy.h> +#include <linux/rt2x00_platform.h> +#include <linux/ar8216_platform.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_regs.h> +#include <asm/mach-ralink/ramips_eth_platform.h> + +#include "devices.h" + +#define TEW_691GR_GPIO_LED_WPS_GREEN 9 + +#define TEW_691GR_GPIO_BUTTON_RESET 10 +#define TEW_691GR_GPIO_BUTTON_WPS 26 + +#define TEW_691GR_GPIO_SWITCH_RFKILL 0 + +#define TEW_691GR_KEYS_POLL_INTERVAL 20 +#define TEW_691GR_KEYS_DEBOUNCE_INTERVAL (3 * TEW_691GR_KEYS_POLL_INTERVAL) + +static struct gpio_led tew_691gr_leds_gpio[] __initdata = { + { + .name = "trendnet:green:wps", + .gpio = TEW_691GR_GPIO_LED_WPS_GREEN, + .active_low = 1, + }, +}; + +static struct gpio_keys_button tew_691gr_gpio_buttons[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TEW_691GR_KEYS_DEBOUNCE_INTERVAL, + .gpio = TEW_691GR_GPIO_BUTTON_RESET, + .active_low = 1, + }, + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = TEW_691GR_KEYS_DEBOUNCE_INTERVAL, + .gpio = TEW_691GR_GPIO_BUTTON_WPS, + .active_low = 1, + }, + { + .desc = "RFKILL switch", + .type = EV_SW, + .code = KEY_RFKILL, + .debounce_interval = TEW_691GR_KEYS_DEBOUNCE_INTERVAL, + .gpio = TEW_691GR_GPIO_SWITCH_RFKILL, + .active_low = 1, + }, +}; + +static void __init tew_691gr_init(void) +{ + rt3883_gpio_init(RT3883_GPIO_MODE_I2C | + RT3883_GPIO_MODE_SPI | + RT3883_GPIO_MODE_UART0(RT3883_GPIO_MODE_GPIO) | + RT3883_GPIO_MODE_JTAG | + RT3883_GPIO_MODE_PCI(RT3883_GPIO_MODE_PCI_FNC)); + + rt3883_register_pflash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(tew_691gr_leds_gpio), + tew_691gr_leds_gpio); + + ramips_register_gpio_buttons(-1, TEW_691GR_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tew_691gr_gpio_buttons), + tew_691gr_gpio_buttons); + + rt3883_wlan_data.disable_5ghz = 1; + rt3883_register_wlan(); + + rt3883_eth_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + rt3883_eth_data.phy_mask = BIT(0); + rt3883_eth_data.tx_fc = 1; + rt3883_eth_data.rx_fc = 1; + rt3883_register_ethernet(); + + rt3883_register_wdt(false); +} + +MIPS_MACHINE(RAMIPS_MACH_TEW_691GR, "TEW-691GR", "TRENDnet TEW-691GR", + tew_691gr_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-tew-692gr.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-tew-692gr.c new file mode 100644 index 0000000000..59b520a371 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/mach-tew-692gr.c @@ -0,0 +1,147 @@ +/* + * TRENDnet TEW-692GR board support + * + * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/ethtool.h> +#include <linux/pci.h> +#include <linux/phy.h> +#include <linux/rt2x00_platform.h> +#include <linux/ar8216_platform.h> + +#include <asm/mach-ralink/machine.h> +#include <asm/mach-ralink/dev-gpio-buttons.h> +#include <asm/mach-ralink/dev-gpio-leds.h> +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_regs.h> +#include <asm/mach-ralink/ramips_eth_platform.h> + +#include "devices.h" + +#define TEW_692GR_GPIO_LED_WPS_ORANGE 9 +#define TEW_692GR_GPIO_LED_WPS_GREEN 28 + +#define TEW_692GR_GPIO_BUTTON_RESET 10 +#define TEW_692GR_GPIO_BUTTON_WPS 26 + +#define TEW_692GR_KEYS_POLL_INTERVAL 20 +#define TEW_692GR_KEYS_DEBOUNCE_INTERVAL (3 * TEW_692GR_KEYS_POLL_INTERVAL) + +static struct gpio_led tew_692gr_leds_gpio[] __initdata = { + { + .name = "trendnet:orange:wps", + .gpio = TEW_692GR_GPIO_LED_WPS_ORANGE, + .active_low = 1, + }, + { + .name = "trendnet:green:wps", + .gpio = TEW_692GR_GPIO_LED_WPS_GREEN, + .active_low = 1, + }, +}; + +static struct gpio_keys_button tew_692gr_gpio_buttons[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TEW_692GR_KEYS_DEBOUNCE_INTERVAL, + .gpio = TEW_692GR_GPIO_BUTTON_RESET, + .active_low = 1, + }, + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = TEW_692GR_KEYS_DEBOUNCE_INTERVAL, + .gpio = TEW_692GR_GPIO_BUTTON_WPS, + .active_low = 1, + }, +}; + +static struct ar8327_pad_cfg tew_692gr_ar8327_pad0_cfg = { + .mode = AR8327_PAD_MAC_RGMII, + .txclk_delay_en = true, + .rxclk_delay_en = true, + .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, +}; + +static struct ar8327_pad_cfg tew_692gr_ar8327_pad6_cfg = { + .mode = AR8327_PAD_MAC_RGMII, + .rxclk_delay_en = true, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0, +}; + +static struct ar8327_led_cfg tew_692gr_ar8327_led_cfg = { + .led_ctrl0 = 0xc437c437, + .led_ctrl1 = 0xc337c337, + .led_ctrl2 = 0x00000000, + .led_ctrl3 = 0x03ffff00, + .open_drain = false, +}; + +static struct ar8327_platform_data tew_692gr_ar8327_data = { + .pad0_cfg = &tew_692gr_ar8327_pad0_cfg, + .pad6_cfg = &tew_692gr_ar8327_pad6_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, + .led_cfg = &tew_692gr_ar8327_led_cfg, +}; + +static struct mdio_board_info tew_692gr_mdio0_info[] = { + { + .bus_id = "ramips_mdio", + .phy_addr = 0, + .platform_data = &tew_692gr_ar8327_data, + }, +}; + +static void __init tew_692gr_init(void) +{ + rt3883_gpio_init(RT3883_GPIO_MODE_I2C | + RT3883_GPIO_MODE_SPI | + RT3883_GPIO_MODE_UART0(RT3883_GPIO_MODE_GPIO) | + RT3883_GPIO_MODE_JTAG | + RT3883_GPIO_MODE_PCI(RT3883_GPIO_MODE_PCI_FNC)); + + rt3883_register_pflash(0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(tew_692gr_leds_gpio), + tew_692gr_leds_gpio); + + ramips_register_gpio_buttons(-1, TEW_692GR_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tew_692gr_gpio_buttons), + tew_692gr_gpio_buttons); + + rt3883_wlan_data.disable_5ghz = 1; + rt3883_register_wlan(); + + mdiobus_register_board_info(tew_692gr_mdio0_info, + ARRAY_SIZE(tew_692gr_mdio0_info)); + + rt3883_eth_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + rt3883_eth_data.phy_mask = BIT(0); + rt3883_eth_data.tx_fc = 1; + rt3883_eth_data.rx_fc = 1; + rt3883_register_ethernet(); + + rt3883_register_wdt(false); + + rt3883_pci_init(RT3883_PCI_MODE_PCIE); +} + +MIPS_MACHINE(RAMIPS_MACH_TEW_692GR, "TEW-692GR", "TRENDnet TEW-692GR", + tew_692gr_init); diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/rt3883.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/rt3883.c new file mode 100644 index 0000000000..e397b854ea --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/rt3883.c @@ -0,0 +1,216 @@ +/* + * Ralink RT3662/RT3883 SoC specific setup + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/ramips_gpio.h> +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_regs.h> + +void __iomem * rt3883_sysc_base; +void __iomem * rt3883_memc_base; + +void __init ramips_soc_prom_init(void) +{ + void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT3883_SYSC_BASE); + u32 n0; + u32 n1; + u32 id; + + n0 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID0_3); + n1 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID4_7); + id = __raw_readl(sysc + RT3883_SYSC_REG_REVID); + + snprintf(ramips_sys_type, RAMIPS_SYS_TYPE_LEN, + "Ralink %c%c%c%c%c%c%c%c ver:%u eco:%u", + (char) (n0 & 0xff), (char) ((n0 >> 8) & 0xff), + (char) ((n0 >> 16) & 0xff), (char) ((n0 >> 24) & 0xff), + (char) (n1 & 0xff), (char) ((n1 >> 8) & 0xff), + (char) ((n1 >> 16) & 0xff), (char) ((n1 >> 24) & 0xff), + (id >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK, + (id & RT3883_REVID_ECO_ID_MASK)); + + ramips_mem_base = RT3883_SDRAM_BASE; + ramips_mem_size_min = RT3883_MEM_SIZE_MIN; + ramips_mem_size_max = RT3883_MEM_SIZE_MAX; +} + +static struct ramips_gpio_chip rt3883_gpio_chips[] = { + { + .chip = { + .label = "RT3883-GPIO0", + .base = 0, + .ngpio = 24, + }, + .regs = { + [RAMIPS_GPIO_REG_INT] = 0x00, + [RAMIPS_GPIO_REG_EDGE] = 0x04, + [RAMIPS_GPIO_REG_RENA] = 0x08, + [RAMIPS_GPIO_REG_FENA] = 0x0c, + [RAMIPS_GPIO_REG_DATA] = 0x20, + [RAMIPS_GPIO_REG_DIR] = 0x24, + [RAMIPS_GPIO_REG_POL] = 0x28, + [RAMIPS_GPIO_REG_SET] = 0x2c, + [RAMIPS_GPIO_REG_RESET] = 0x30, + [RAMIPS_GPIO_REG_TOGGLE] = 0x34, + }, + .map_base = RT3883_PIO_BASE, + .map_size = RT3883_PIO_SIZE, + }, + { + .chip = { + .label = "RT3883-GPIO1", + .base = 24, + .ngpio = 16, + }, + .regs = { + [RAMIPS_GPIO_REG_INT] = 0x38, + [RAMIPS_GPIO_REG_EDGE] = 0x3c, + [RAMIPS_GPIO_REG_RENA] = 0x40, + [RAMIPS_GPIO_REG_FENA] = 0x44, + [RAMIPS_GPIO_REG_DATA] = 0x48, + [RAMIPS_GPIO_REG_DIR] = 0x4c, + [RAMIPS_GPIO_REG_POL] = 0x50, + [RAMIPS_GPIO_REG_SET] = 0x54, + [RAMIPS_GPIO_REG_RESET] = 0x58, + [RAMIPS_GPIO_REG_TOGGLE] = 0x5c, + }, + .map_base = RT3883_PIO_BASE, + .map_size = RT3883_PIO_SIZE, + }, + { + .chip = { + .label = "RT3883-GPIO2", + .base = 40, + .ngpio = 32, + }, + .regs = { + [RAMIPS_GPIO_REG_INT] = 0x60, + [RAMIPS_GPIO_REG_EDGE] = 0x64, + [RAMIPS_GPIO_REG_RENA] = 0x68, + [RAMIPS_GPIO_REG_FENA] = 0x6c, + [RAMIPS_GPIO_REG_DATA] = 0x70, + [RAMIPS_GPIO_REG_DIR] = 0x74, + [RAMIPS_GPIO_REG_POL] = 0x78, + [RAMIPS_GPIO_REG_SET] = 0x7c, + [RAMIPS_GPIO_REG_RESET] = 0x80, + [RAMIPS_GPIO_REG_TOGGLE] = 0x84, + }, + .map_base = RT3883_PIO_BASE, + .map_size = RT3883_PIO_SIZE, + }, + { + .chip = { + .label = "RT3883-GPIO3", + .base = 72, + .ngpio = 24, + }, + .regs = { + [RAMIPS_GPIO_REG_INT] = 0x88, + [RAMIPS_GPIO_REG_EDGE] = 0x8c, + [RAMIPS_GPIO_REG_RENA] = 0x90, + [RAMIPS_GPIO_REG_FENA] = 0x94, + [RAMIPS_GPIO_REG_DATA] = 0x98, + [RAMIPS_GPIO_REG_DIR] = 0x9c, + [RAMIPS_GPIO_REG_POL] = 0xa0, + [RAMIPS_GPIO_REG_SET] = 0xa4, + [RAMIPS_GPIO_REG_RESET] = 0xa8, + [RAMIPS_GPIO_REG_TOGGLE] = 0xac, + }, + .map_base = RT3883_PIO_BASE, + .map_size = RT3883_PIO_SIZE, + }, +}; + +static struct ramips_gpio_data rt3883_gpio_data = { + .chips = rt3883_gpio_chips, + .num_chips = ARRAY_SIZE(rt3883_gpio_chips), +}; + +static void rt3883_gpio_reserve(int first, int last) +{ + for (; first <= last; first++) + gpio_request(first, "reserved"); +} + +void __init rt3883_gpio_init(u32 mode) +{ + u32 t; + + rt3883_sysc_wr(mode, RT3883_SYSC_REG_GPIO_MODE); + + ramips_gpio_init(&rt3883_gpio_data); + if ((mode & RT3883_GPIO_MODE_I2C) == 0) + rt3883_gpio_reserve(RT3883_GPIO_I2C_SD, RT3883_GPIO_I2C_SCLK); + + if ((mode & RT3883_GPIO_MODE_SPI) == 0) + rt3883_gpio_reserve(RT3883_GPIO_SPI_CS0, RT3883_GPIO_SPI_MISO); + + t = mode >> RT3883_GPIO_MODE_UART0_SHIFT; + t &= RT3883_GPIO_MODE_UART0_MASK; + switch (t) { + case RT3883_GPIO_MODE_UARTF: + case RT3883_GPIO_MODE_PCM_UARTF: + case RT3883_GPIO_MODE_PCM_I2S: + case RT3883_GPIO_MODE_I2S_UARTF: + rt3883_gpio_reserve(RT3883_GPIO_7, RT3883_GPIO_14); + break; + case RT3883_GPIO_MODE_PCM_GPIO: + rt3883_gpio_reserve(RT3883_GPIO_11, RT3883_GPIO_14); + break; + case RT3883_GPIO_MODE_GPIO_UARTF: + case RT3883_GPIO_MODE_GPIO_I2S: + rt3883_gpio_reserve(RT3883_GPIO_7, RT3883_GPIO_10); + break; + } + + if ((mode & RT3883_GPIO_MODE_UART1) == 0) + rt3883_gpio_reserve(RT3883_GPIO_UART1_TXD, + RT3883_GPIO_UART1_RXD); + + if ((mode & RT3883_GPIO_MODE_JTAG) == 0) + rt3883_gpio_reserve(RT3883_GPIO_JTAG_TDO, + RT3883_GPIO_JTAG_TCLK); + + if ((mode & RT3883_GPIO_MODE_MDIO) == 0) + rt3883_gpio_reserve(RT3883_GPIO_MDIO_MDC, + RT3883_GPIO_MDIO_MDIO); + + if ((mode & RT3883_GPIO_MODE_GE1) == 0) + rt3883_gpio_reserve(RT3883_GPIO_GE1_TXD0, + RT3883_GPIO_GE1_RXCLK); + + if ((mode & RT3883_GPIO_MODE_GE2) == 0) + rt3883_gpio_reserve(RT3883_GPIO_GE2_TXD0, + RT3883_GPIO_GE2_RXCLK); + + t = mode >> RT3883_GPIO_MODE_PCI_SHIFT; + t &= RT3883_GPIO_MODE_PCI_MASK; + if (t != RT3883_GPIO_MODE_PCI_GPIO) + rt3883_gpio_reserve(RT3883_GPIO_PCI_AD0, + RT3883_GPIO_PCI_AD31); + + t = mode >> RT3883_GPIO_MODE_LNA_A_SHIFT; + t &= RT3883_GPIO_MODE_LNA_A_MASK; + if (t != RT3883_GPIO_MODE_LNA_A_GPIO) + rt3883_gpio_reserve(RT3883_GPIO_LNA_PE_A0, + RT3883_GPIO_LNA_PE_A2); + + t = mode >> RT3883_GPIO_MODE_LNA_G_SHIFT; + t &= RT3883_GPIO_MODE_LNA_G_MASK; + if (t != RT3883_GPIO_MODE_LNA_G_GPIO) + rt3883_gpio_reserve(RT3883_GPIO_LNA_PE_G0, + RT3883_GPIO_LNA_PE_G2); +} diff --git a/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/setup.c b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/setup.c new file mode 100644 index 0000000000..6e037a7291 --- /dev/null +++ b/target/linux/ramips/files-3.7/arch/mips/ralink/rt3883/setup.c @@ -0,0 +1,88 @@ +/* + * Ralink RT3662/RT3883 SoC specific setup + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/err.h> +#include <linux/clk.h> + +#include <asm/mips_machine.h> +#include <asm/reboot.h> +#include <asm/time.h> + +#include <asm/mach-ralink/common.h> +#include <asm/mach-ralink/rt3883.h> +#include <asm/mach-ralink/rt3883_regs.h> +#include "common.h" + +static void rt3883_restart(char *command) +{ + rt3883_sysc_wr(RT3883_RSTCTRL_SYS, RT3883_SYSC_REG_RSTCTRL); + while (1) + if (cpu_wait) + cpu_wait(); +} + +static void rt3883_halt(void) +{ + while (1) + if (cpu_wait) + cpu_wait(); +} + +unsigned int __cpuinit get_c0_compare_irq(void) +{ + return CP0_LEGACY_COMPARE_IRQ; +} + +void __init ramips_soc_setup(void) +{ + struct clk *clk; + + rt3883_sysc_base = ioremap_nocache(RT3883_SYSC_BASE, PAGE_SIZE); + rt3883_memc_base = ioremap_nocache(RT3883_MEMC_BASE, PAGE_SIZE); + + rt3883_clocks_init(); + + clk = clk_get(NULL, "cpu"); + if (IS_ERR(clk)) + panic("unable to get CPU clock, err=%ld", PTR_ERR(clk)); + + printk(KERN_INFO "%s running at %lu.%02lu MHz\n", ramips_sys_type, + clk_get_rate(clk) / 1000000, + (clk_get_rate(clk) % 1000000) * 100 / 1000000); + + _machine_restart = rt3883_restart; + _machine_halt = rt3883_halt; + pm_power_off = rt3883_halt; + + clk = clk_get(NULL, "uart"); + if (IS_ERR(clk)) + panic("unable to get UART clock, err=%ld", PTR_ERR(clk)); + + ramips_early_serial_setup(0, RT3883_UART0_BASE, clk_get_rate(clk), + RT3883_INTC_IRQ_UART0); + ramips_early_serial_setup(1, RT3883_UART1_BASE, clk_get_rate(clk), + RT3883_INTC_IRQ_UART1); +} + +void __init plat_time_init(void) +{ + struct clk *clk; + + clk = clk_get(NULL, "cpu"); + if (IS_ERR(clk)) + panic("unable to get CPU clock, err=%ld", PTR_ERR(clk)); + + mips_hpt_frequency = clk_get_rate(clk) / 2; +} diff --git a/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/Kconfig b/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/Kconfig new file mode 100644 index 0000000000..1bc4c2bb08 --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/Kconfig @@ -0,0 +1,18 @@ +config NET_RAMIPS + tristate "Ralink RT288X/RT3X5X/RT3662/RT3883 ethernet driver" + depends on MIPS_RALINK + select PHYLIB if (SOC_RT288X || SOC_RT3883) + select SWCONFIG if SOC_RT305X + help + This driver supports the etehrnet mac inside the ralink wisocs + +if NET_RAMIPS + +config NET_RAMIPS_DEBUG + bool "Enable debug messages in the Ralink ethernet driver" + +config NET_RAMIPS_DEBUG_FS + bool "Enable debugfs support for the Ralink ethernet driver" + depends on DEBUG_FS + +endif diff --git a/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/Makefile b/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/Makefile new file mode 100644 index 0000000000..22c460d4df --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for the Ramips SoCs built-in ethernet macs +# + +ramips-y += ramips_main.o + +ramips-$(CONFIG_NET_RAMIPS_DEBUG_FS) += ramips_debugfs.o + +obj-$(CONFIG_NET_RAMIPS) += ramips.o diff --git a/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_debugfs.c b/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_debugfs.c new file mode 100644 index 0000000000..20afcf5028 --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_debugfs.c @@ -0,0 +1,127 @@ +/* + * Ralink SoC ethernet driver debugfs code + * + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/debugfs.h> +#include <linux/module.h> +#include <linux/phy.h> + +#include "ramips_eth.h" + +static struct dentry *raeth_debugfs_root; + +static int raeth_debugfs_generic_open(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} + +void raeth_debugfs_update_int_stats(struct raeth_priv *re, u32 status) +{ + re->debug.int_stats.total += !!status; + + re->debug.int_stats.rx_delayed += !!(status & RAMIPS_RX_DLY_INT); + re->debug.int_stats.rx_done0 += !!(status & RAMIPS_RX_DONE_INT0); + re->debug.int_stats.rx_coherent += !!(status & RAMIPS_RX_COHERENT); + + re->debug.int_stats.tx_delayed += !!(status & RAMIPS_TX_DLY_INT); + re->debug.int_stats.tx_done0 += !!(status & RAMIPS_TX_DONE_INT0); + re->debug.int_stats.tx_done1 += !!(status & RAMIPS_TX_DONE_INT1); + re->debug.int_stats.tx_done2 += !!(status & RAMIPS_TX_DONE_INT2); + re->debug.int_stats.tx_done3 += !!(status & RAMIPS_TX_DONE_INT3); + re->debug.int_stats.tx_coherent += !!(status & RAMIPS_TX_COHERENT); + + re->debug.int_stats.pse_fq_empty += !!(status & RAMIPS_PSE_FQ_EMPTY); + re->debug.int_stats.pse_p0_fc += !!(status & RAMIPS_PSE_P0_FC); + re->debug.int_stats.pse_p1_fc += !!(status & RAMIPS_PSE_P1_FC); + re->debug.int_stats.pse_p2_fc += !!(status & RAMIPS_PSE_P2_FC); + re->debug.int_stats.pse_buf_drop += !!(status & RAMIPS_PSE_BUF_DROP); +} + +static ssize_t read_file_int_stats(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ +#define PR_INT_STAT(_label, _field) \ + len += snprintf(buf + len, sizeof(buf) - len, \ + "%-18s: %10lu\n", _label, re->debug.int_stats._field); + + struct raeth_priv *re = file->private_data; + char buf[512]; + unsigned int len = 0; + unsigned long flags; + + spin_lock_irqsave(&re->page_lock, flags); + + PR_INT_STAT("RX Delayed", rx_delayed); + PR_INT_STAT("RX Done 0", rx_done0); + PR_INT_STAT("RX Coherent", rx_coherent); + + PR_INT_STAT("TX Delayed", tx_delayed); + PR_INT_STAT("TX Done 0", tx_done0); + PR_INT_STAT("TX Done 1", tx_done1); + PR_INT_STAT("TX Done 2", tx_done2); + PR_INT_STAT("TX Done 3", tx_done3); + PR_INT_STAT("TX Coherent", tx_coherent); + + PR_INT_STAT("PSE FQ empty", pse_fq_empty); + PR_INT_STAT("CDMA Flow control", pse_p0_fc); + PR_INT_STAT("GDMA1 Flow control", pse_p1_fc); + PR_INT_STAT("GDMA2 Flow control", pse_p2_fc); + PR_INT_STAT("PSE discard", pse_buf_drop); + + len += snprintf(buf + len, sizeof(buf) - len, "\n"); + PR_INT_STAT("Total", total); + + spin_unlock_irqrestore(&re->page_lock, flags); + + return simple_read_from_buffer(user_buf, count, ppos, buf, len); +#undef PR_INT_STAT +} + +static const struct file_operations raeth_fops_int_stats = { + .open = raeth_debugfs_generic_open, + .read = read_file_int_stats, + .owner = THIS_MODULE +}; + +void raeth_debugfs_exit(struct raeth_priv *re) +{ + debugfs_remove_recursive(re->debug.debugfs_dir); +} + +int raeth_debugfs_init(struct raeth_priv *re) +{ + re->debug.debugfs_dir = debugfs_create_dir(re->netdev->name, + raeth_debugfs_root); + if (!re->debug.debugfs_dir) + return -ENOMEM; + + debugfs_create_file("int_stats", S_IRUGO, re->debug.debugfs_dir, + re, &raeth_fops_int_stats); + + return 0; +} + +int raeth_debugfs_root_init(void) +{ + if (raeth_debugfs_root) + return -EBUSY; + + raeth_debugfs_root = debugfs_create_dir("raeth", NULL); + if (!raeth_debugfs_root) + return -ENOENT; + + return 0; +} + +void raeth_debugfs_root_exit(void) +{ + debugfs_remove(raeth_debugfs_root); + raeth_debugfs_root = NULL; +} diff --git a/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_esw.c b/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_esw.c new file mode 100644 index 0000000000..d3150d7a6f --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_esw.c @@ -0,0 +1,1132 @@ +#include <linux/ioport.h> +#include <linux/switch.h> +#include <linux/mii.h> + +#include <rt305x_regs.h> +#include <rt305x_esw_platform.h> + +/* + * HW limitations for this switch: + * - No large frame support (PKT_MAX_LEN at most 1536) + * - Can't have untagged vlan and tagged vlan on one port at the same time, + * though this might be possible using the undocumented PPE. + */ + +#define RT305X_ESW_REG_FCT0 0x08 +#define RT305X_ESW_REG_PFC1 0x14 +#define RT305X_ESW_REG_ATS 0x24 +#define RT305X_ESW_REG_ATS0 0x28 +#define RT305X_ESW_REG_ATS1 0x2c +#define RT305X_ESW_REG_ATS2 0x30 +#define RT305X_ESW_REG_PVIDC(_n) (0x40 + 4 * (_n)) +#define RT305X_ESW_REG_VLANI(_n) (0x50 + 4 * (_n)) +#define RT305X_ESW_REG_VMSC(_n) (0x70 + 4 * (_n)) +#define RT305X_ESW_REG_POA 0x80 +#define RT305X_ESW_REG_FPA 0x84 +#define RT305X_ESW_REG_SOCPC 0x8c +#define RT305X_ESW_REG_POC0 0x90 +#define RT305X_ESW_REG_POC1 0x94 +#define RT305X_ESW_REG_POC2 0x98 +#define RT305X_ESW_REG_SGC 0x9c +#define RT305X_ESW_REG_STRT 0xa0 +#define RT305X_ESW_REG_PCR0 0xc0 +#define RT305X_ESW_REG_PCR1 0xc4 +#define RT305X_ESW_REG_FPA2 0xc8 +#define RT305X_ESW_REG_FCT2 0xcc +#define RT305X_ESW_REG_SGC2 0xe4 +#define RT305X_ESW_REG_P0LED 0xa4 +#define RT305X_ESW_REG_P1LED 0xa8 +#define RT305X_ESW_REG_P2LED 0xac +#define RT305X_ESW_REG_P3LED 0xb0 +#define RT305X_ESW_REG_P4LED 0xb4 +#define RT305X_ESW_REG_P0PC 0xe8 +#define RT305X_ESW_REG_P1PC 0xec +#define RT305X_ESW_REG_P2PC 0xf0 +#define RT305X_ESW_REG_P3PC 0xf4 +#define RT305X_ESW_REG_P4PC 0xf8 +#define RT305X_ESW_REG_P5PC 0xfc + +#define RT305X_ESW_LED_LINK 0 +#define RT305X_ESW_LED_100M 1 +#define RT305X_ESW_LED_DUPLEX 2 +#define RT305X_ESW_LED_ACTIVITY 3 +#define RT305X_ESW_LED_COLLISION 4 +#define RT305X_ESW_LED_LINKACT 5 +#define RT305X_ESW_LED_DUPLCOLL 6 +#define RT305X_ESW_LED_10MACT 7 +#define RT305X_ESW_LED_100MACT 8 +/* Additional led states not in datasheet: */ +#define RT305X_ESW_LED_BLINK 10 +#define RT305X_ESW_LED_ON 12 + +#define RT305X_ESW_LINK_S 25 +#define RT305X_ESW_DUPLEX_S 9 +#define RT305X_ESW_SPD_S 0 + +#define RT305X_ESW_PCR0_WT_NWAY_DATA_S 16 +#define RT305X_ESW_PCR0_WT_PHY_CMD BIT(13) +#define RT305X_ESW_PCR0_CPU_PHY_REG_S 8 + +#define RT305X_ESW_PCR1_WT_DONE BIT(0) + +#define RT305X_ESW_ATS_TIMEOUT (5 * HZ) +#define RT305X_ESW_PHY_TIMEOUT (5 * HZ) + +#define RT305X_ESW_PVIDC_PVID_M 0xfff +#define RT305X_ESW_PVIDC_PVID_S 12 + +#define RT305X_ESW_VLANI_VID_M 0xfff +#define RT305X_ESW_VLANI_VID_S 12 + +#define RT305X_ESW_VMSC_MSC_M 0xff +#define RT305X_ESW_VMSC_MSC_S 8 + +#define RT305X_ESW_SOCPC_DISUN2CPU_S 0 +#define RT305X_ESW_SOCPC_DISMC2CPU_S 8 +#define RT305X_ESW_SOCPC_DISBC2CPU_S 16 +#define RT305X_ESW_SOCPC_CRC_PADDING BIT(25) + +#define RT305X_ESW_POC0_EN_BP_S 0 +#define RT305X_ESW_POC0_EN_FC_S 8 +#define RT305X_ESW_POC0_DIS_RMC2CPU_S 16 +#define RT305X_ESW_POC0_DIS_PORT_M 0x7f +#define RT305X_ESW_POC0_DIS_PORT_S 23 + +#define RT305X_ESW_POC2_UNTAG_EN_M 0xff +#define RT305X_ESW_POC2_UNTAG_EN_S 0 +#define RT305X_ESW_POC2_ENAGING_S 8 +#define RT305X_ESW_POC2_DIS_UC_PAUSE_S 16 + +#define RT305X_ESW_SGC2_DOUBLE_TAG_M 0x7f +#define RT305X_ESW_SGC2_DOUBLE_TAG_S 0 +#define RT305X_ESW_SGC2_LAN_PMAP_M 0x3f +#define RT305X_ESW_SGC2_LAN_PMAP_S 24 + +#define RT305X_ESW_PFC1_EN_VLAN_M 0xff +#define RT305X_ESW_PFC1_EN_VLAN_S 16 +#define RT305X_ESW_PFC1_EN_TOS_S 24 + +#define RT305X_ESW_VLAN_NONE 0xfff + +#define RT305X_ESW_PORT0 0 +#define RT305X_ESW_PORT1 1 +#define RT305X_ESW_PORT2 2 +#define RT305X_ESW_PORT3 3 +#define RT305X_ESW_PORT4 4 +#define RT305X_ESW_PORT5 5 +#define RT305X_ESW_PORT6 6 + +#define RT305X_ESW_PORTS_NONE 0 + +#define RT305X_ESW_PMAP_LLLLLL 0x3f +#define RT305X_ESW_PMAP_LLLLWL 0x2f +#define RT305X_ESW_PMAP_WLLLLL 0x3e + +#define RT305X_ESW_PORTS_INTERNAL \ + (BIT(RT305X_ESW_PORT0) | BIT(RT305X_ESW_PORT1) | \ + BIT(RT305X_ESW_PORT2) | BIT(RT305X_ESW_PORT3) | \ + BIT(RT305X_ESW_PORT4)) + +#define RT305X_ESW_PORTS_NOCPU \ + (RT305X_ESW_PORTS_INTERNAL | BIT(RT305X_ESW_PORT5)) + +#define RT305X_ESW_PORTS_CPU BIT(RT305X_ESW_PORT6) + +#define RT305X_ESW_PORTS_ALL \ + (RT305X_ESW_PORTS_NOCPU | RT305X_ESW_PORTS_CPU) + +#define RT305X_ESW_NUM_VLANS 16 +#define RT305X_ESW_NUM_VIDS 4096 +#define RT305X_ESW_NUM_PORTS 7 +#define RT305X_ESW_NUM_LANWAN 6 +#define RT305X_ESW_NUM_LEDS 5 + +enum { + /* Global attributes. */ + RT305X_ESW_ATTR_ENABLE_VLAN, + RT305X_ESW_ATTR_ALT_VLAN_DISABLE, + /* Port attributes. */ + RT305X_ESW_ATTR_PORT_DISABLE, + RT305X_ESW_ATTR_PORT_DOUBLETAG, + RT305X_ESW_ATTR_PORT_UNTAG, + RT305X_ESW_ATTR_PORT_LED, + RT305X_ESW_ATTR_PORT_LAN, + RT305X_ESW_ATTR_PORT_RECV_BAD, + RT305X_ESW_ATTR_PORT_RECV_GOOD, +}; + +struct rt305x_esw_port { + bool disable; + bool doubletag; + bool untag; + u8 led; + u16 pvid; +}; + +struct rt305x_esw_vlan { + u8 ports; + u16 vid; +}; + +struct rt305x_esw { + void __iomem *base; + struct rt305x_esw_platform_data *pdata; + /* Protects against concurrent register rmw operations. */ + spinlock_t reg_rw_lock; + + struct switch_dev swdev; + bool global_vlan_enable; + bool alt_vlan_disable; + struct rt305x_esw_vlan vlans[RT305X_ESW_NUM_VLANS]; + struct rt305x_esw_port ports[RT305X_ESW_NUM_PORTS]; + +}; + +static inline void +rt305x_esw_wr(struct rt305x_esw *esw, u32 val, unsigned reg) +{ + __raw_writel(val, esw->base + reg); +} + +static inline u32 +rt305x_esw_rr(struct rt305x_esw *esw, unsigned reg) +{ + return __raw_readl(esw->base + reg); +} + +static inline void +rt305x_esw_rmw_raw(struct rt305x_esw *esw, unsigned reg, unsigned long mask, + unsigned long val) +{ + unsigned long t; + + t = __raw_readl(esw->base + reg) & ~mask; + __raw_writel(t | val, esw->base + reg); +} + +static void +rt305x_esw_rmw(struct rt305x_esw *esw, unsigned reg, unsigned long mask, + unsigned long val) +{ + unsigned long flags; + + spin_lock_irqsave(&esw->reg_rw_lock, flags); + rt305x_esw_rmw_raw(esw, reg, mask, val); + spin_unlock_irqrestore(&esw->reg_rw_lock, flags); +} + +static u32 +rt305x_mii_write(struct rt305x_esw *esw, u32 phy_addr, u32 phy_register, + u32 write_data) +{ + unsigned long t_start = jiffies; + int ret = 0; + + while (1) { + if (!(rt305x_esw_rr(esw, RT305X_ESW_REG_PCR1) & + RT305X_ESW_PCR1_WT_DONE)) + break; + if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) { + ret = 1; + goto out; + } + } + + write_data &= 0xffff; + rt305x_esw_wr(esw, + (write_data << RT305X_ESW_PCR0_WT_NWAY_DATA_S) | + (phy_register << RT305X_ESW_PCR0_CPU_PHY_REG_S) | + (phy_addr) | RT305X_ESW_PCR0_WT_PHY_CMD, + RT305X_ESW_REG_PCR0); + + t_start = jiffies; + while (1) { + if (rt305x_esw_rr(esw, RT305X_ESW_REG_PCR1) & + RT305X_ESW_PCR1_WT_DONE) + break; + + if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) { + ret = 1; + break; + } + } +out: + if (ret) + printk(KERN_ERR "ramips_eth: MDIO timeout\n"); + return ret; +} + +static unsigned +rt305x_esw_get_vlan_id(struct rt305x_esw *esw, unsigned vlan) +{ + unsigned s; + unsigned val; + + s = RT305X_ESW_VLANI_VID_S * (vlan % 2); + val = rt305x_esw_rr(esw, RT305X_ESW_REG_VLANI(vlan / 2)); + val = (val >> s) & RT305X_ESW_VLANI_VID_M; + + return val; +} + +static void +rt305x_esw_set_vlan_id(struct rt305x_esw *esw, unsigned vlan, unsigned vid) +{ + unsigned s; + + s = RT305X_ESW_VLANI_VID_S * (vlan % 2); + rt305x_esw_rmw(esw, + RT305X_ESW_REG_VLANI(vlan / 2), + RT305X_ESW_VLANI_VID_M << s, + (vid & RT305X_ESW_VLANI_VID_M) << s); +} + +static unsigned +rt305x_esw_get_pvid(struct rt305x_esw *esw, unsigned port) +{ + unsigned s, val; + + s = RT305X_ESW_PVIDC_PVID_S * (port % 2); + val = rt305x_esw_rr(esw, RT305X_ESW_REG_PVIDC(port / 2)); + return (val >> s) & RT305X_ESW_PVIDC_PVID_M; +} + +static void +rt305x_esw_set_pvid(struct rt305x_esw *esw, unsigned port, unsigned pvid) +{ + unsigned s; + + s = RT305X_ESW_PVIDC_PVID_S * (port % 2); + rt305x_esw_rmw(esw, + RT305X_ESW_REG_PVIDC(port / 2), + RT305X_ESW_PVIDC_PVID_M << s, + (pvid & RT305X_ESW_PVIDC_PVID_M) << s); +} + +static unsigned +rt305x_esw_get_vmsc(struct rt305x_esw *esw, unsigned vlan) +{ + unsigned s, val; + + s = RT305X_ESW_VMSC_MSC_S * (vlan % 4); + val = rt305x_esw_rr(esw, RT305X_ESW_REG_VMSC(vlan / 4)); + val = (val >> s) & RT305X_ESW_VMSC_MSC_M; + + return val; +} + +static void +rt305x_esw_set_vmsc(struct rt305x_esw *esw, unsigned vlan, unsigned msc) +{ + unsigned s; + + s = RT305X_ESW_VMSC_MSC_S * (vlan % 4); + rt305x_esw_rmw(esw, + RT305X_ESW_REG_VMSC(vlan / 4), + RT305X_ESW_VMSC_MSC_M << s, + (msc & RT305X_ESW_VMSC_MSC_M) << s); +} + +static unsigned +rt305x_esw_get_port_disable(struct rt305x_esw *esw) +{ + unsigned reg; + reg = rt305x_esw_rr(esw, RT305X_ESW_REG_POC0); + return (reg >> RT305X_ESW_POC0_DIS_PORT_S) & + RT305X_ESW_POC0_DIS_PORT_M; +} + +static void +rt305x_esw_set_port_disable(struct rt305x_esw *esw, unsigned disable_mask) +{ + unsigned old_mask; + unsigned enable_mask; + unsigned changed; + int i; + + old_mask = rt305x_esw_get_port_disable(esw); + changed = old_mask ^ disable_mask; + enable_mask = old_mask & disable_mask; + + /* enable before writing to MII */ + rt305x_esw_rmw(esw, RT305X_ESW_REG_POC0, + (RT305X_ESW_POC0_DIS_PORT_M << + RT305X_ESW_POC0_DIS_PORT_S), + enable_mask << RT305X_ESW_POC0_DIS_PORT_S); + + for (i = 0; i < RT305X_ESW_NUM_LEDS; i++) { + if (!(changed & (1 << i))) + continue; + if (disable_mask & (1 << i)) { + /* disable */ + rt305x_mii_write(esw, i, MII_BMCR, + BMCR_PDOWN); + } else { + /* enable */ + rt305x_mii_write(esw, i, MII_BMCR, + BMCR_FULLDPLX | + BMCR_ANENABLE | + BMCR_ANRESTART | + BMCR_SPEED100); + } + } + + /* disable after writing to MII */ + rt305x_esw_rmw(esw, RT305X_ESW_REG_POC0, + (RT305X_ESW_POC0_DIS_PORT_M << + RT305X_ESW_POC0_DIS_PORT_S), + disable_mask << RT305X_ESW_POC0_DIS_PORT_S); +} + +static int +rt305x_esw_apply_config(struct switch_dev *dev); + +static void +rt305x_esw_hw_init(struct rt305x_esw *esw) +{ + int i; + u8 port_disable = 0; + u8 port_map = RT305X_ESW_PMAP_LLLLLL; + + /* vodoo from original driver */ + rt305x_esw_wr(esw, 0xC8A07850, RT305X_ESW_REG_FCT0); + rt305x_esw_wr(esw, 0x00000000, RT305X_ESW_REG_SGC2); + /* Port priority 1 for all ports, vlan enabled. */ + rt305x_esw_wr(esw, 0x00005555 | + (RT305X_ESW_PORTS_ALL << RT305X_ESW_PFC1_EN_VLAN_S), + RT305X_ESW_REG_PFC1); + + /* Enable Back Pressure, and Flow Control */ + rt305x_esw_wr(esw, + ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_BP_S) | + (RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_FC_S)), + RT305X_ESW_REG_POC0); + + /* Enable Aging, and VLAN TAG removal */ + rt305x_esw_wr(esw, + ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC2_ENAGING_S) | + (RT305X_ESW_PORTS_NOCPU << RT305X_ESW_POC2_UNTAG_EN_S)), + RT305X_ESW_REG_POC2); + + rt305x_esw_wr(esw, esw->pdata->reg_initval_fct2, RT305X_ESW_REG_FCT2); + + /* + * 300s aging timer, max packet len 1536, broadcast storm prevention + * disabled, disable collision abort, mac xor48 hash, 10 packet back + * pressure jam, GMII disable was_transmit, back pressure disabled, + * 30ms led flash, unmatched IGMP as broadcast, rmc tb fault to all + * ports. + */ + rt305x_esw_wr(esw, 0x0008a301, RT305X_ESW_REG_SGC); + + /* Setup SoC Port control register */ + rt305x_esw_wr(esw, + (RT305X_ESW_SOCPC_CRC_PADDING | + (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISUN2CPU_S) | + (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISMC2CPU_S) | + (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISBC2CPU_S)), + RT305X_ESW_REG_SOCPC); + + rt305x_esw_wr(esw, esw->pdata->reg_initval_fpa2, RT305X_ESW_REG_FPA2); + rt305x_esw_wr(esw, 0x00000000, RT305X_ESW_REG_FPA); + + /* Force Link/Activity on ports */ + rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P0LED); + rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P1LED); + rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P2LED); + rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P3LED); + rt305x_esw_wr(esw, 0x00000005, RT305X_ESW_REG_P4LED); + + /* Copy disabled port configuration from bootloader setup */ + port_disable = rt305x_esw_get_port_disable(esw); + for (i = 0; i < 6; i++) + esw->ports[i].disable = (port_disable & (1 << i)) != 0; + + rt305x_mii_write(esw, 0, 31, 0x8000); + for (i = 0; i < 5; i++) { + if (esw->ports[i].disable) { + rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN); + } else { + rt305x_mii_write(esw, i, MII_BMCR, + BMCR_FULLDPLX | + BMCR_ANENABLE | + BMCR_SPEED100); + } + /* TX10 waveform coefficient */ + rt305x_mii_write(esw, i, 26, 0x1601); + /* TX100/TX10 AD/DA current bias */ + rt305x_mii_write(esw, i, 29, 0x7058); + /* TX100 slew rate control */ + rt305x_mii_write(esw, i, 30, 0x0018); + } + + /* PHY IOT */ + /* select global register */ + rt305x_mii_write(esw, 0, 31, 0x0); + /* tune TP_IDL tail and head waveform */ + rt305x_mii_write(esw, 0, 22, 0x052f); + /* set TX10 signal amplitude threshold to minimum */ + rt305x_mii_write(esw, 0, 17, 0x0fe0); + /* set squelch amplitude to higher threshold */ + rt305x_mii_write(esw, 0, 18, 0x40ba); + /* longer TP_IDL tail length */ + rt305x_mii_write(esw, 0, 14, 0x65); + /* select local register */ + rt305x_mii_write(esw, 0, 31, 0x8000); + + switch (esw->pdata->vlan_config) { + case RT305X_ESW_VLAN_CONFIG_NONE: + port_map = RT305X_ESW_PMAP_LLLLLL; + break; + case RT305X_ESW_VLAN_CONFIG_LLLLW: + port_map = RT305X_ESW_PMAP_LLLLWL; + break; + case RT305X_ESW_VLAN_CONFIG_WLLLL: + port_map = RT305X_ESW_PMAP_WLLLLL; + break; + default: + BUG(); + } + + /* + * Unused HW feature, but still nice to be consistent here... + * This is also exported to userspace ('lan' attribute) so it's + * conveniently usable to decide which ports go into the wan vlan by + * default. + */ + rt305x_esw_rmw(esw, RT305X_ESW_REG_SGC2, + RT305X_ESW_SGC2_LAN_PMAP_M << RT305X_ESW_SGC2_LAN_PMAP_S, + port_map << RT305X_ESW_SGC2_LAN_PMAP_S); + + /* make the switch leds blink */ + for (i = 0; i < RT305X_ESW_NUM_LEDS; i++) + esw->ports[i].led = 0x05; + + /* Apply the empty config. */ + rt305x_esw_apply_config(&esw->swdev); +} + +static int +rt305x_esw_apply_config(struct switch_dev *dev) +{ + struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); + int i; + u8 disable = 0; + u8 doubletag = 0; + u8 en_vlan = 0; + u8 untag = 0; + + for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) { + u32 vid, vmsc; + if (esw->global_vlan_enable) { + vid = esw->vlans[i].vid; + vmsc = esw->vlans[i].ports; + } else { + vid = RT305X_ESW_VLAN_NONE; + vmsc = RT305X_ESW_PORTS_NONE; + } + rt305x_esw_set_vlan_id(esw, i, vid); + rt305x_esw_set_vmsc(esw, i, vmsc); + } + + for (i = 0; i < RT305X_ESW_NUM_PORTS; i++) { + u32 pvid; + disable |= esw->ports[i].disable << i; + if (esw->global_vlan_enable) { + doubletag |= esw->ports[i].doubletag << i; + en_vlan |= 1 << i; + untag |= esw->ports[i].untag << i; + pvid = esw->ports[i].pvid; + } else { + int x = esw->alt_vlan_disable ? 0 : 1; + doubletag |= x << i; + en_vlan |= x << i; + untag |= x << i; + pvid = 0; + } + rt305x_esw_set_pvid(esw, i, pvid); + if (i < RT305X_ESW_NUM_LEDS) + rt305x_esw_wr(esw, esw->ports[i].led, + RT305X_ESW_REG_P0LED + 4*i); + } + + rt305x_esw_set_port_disable(esw, disable); + rt305x_esw_rmw(esw, RT305X_ESW_REG_SGC2, + (RT305X_ESW_SGC2_DOUBLE_TAG_M << + RT305X_ESW_SGC2_DOUBLE_TAG_S), + doubletag << RT305X_ESW_SGC2_DOUBLE_TAG_S); + rt305x_esw_rmw(esw, RT305X_ESW_REG_PFC1, + RT305X_ESW_PFC1_EN_VLAN_M << RT305X_ESW_PFC1_EN_VLAN_S, + en_vlan << RT305X_ESW_PFC1_EN_VLAN_S); + rt305x_esw_rmw(esw, RT305X_ESW_REG_POC2, + RT305X_ESW_POC2_UNTAG_EN_M << RT305X_ESW_POC2_UNTAG_EN_S, + untag << RT305X_ESW_POC2_UNTAG_EN_S); + + if (!esw->global_vlan_enable) { + /* + * Still need to put all ports into vlan 0 or they'll be + * isolated. + * NOTE: vlan 0 is special, no vlan tag is prepended + */ + rt305x_esw_set_vlan_id(esw, 0, 0); + rt305x_esw_set_vmsc(esw, 0, RT305X_ESW_PORTS_ALL); + } + + return 0; +} + +static int +rt305x_esw_reset_switch(struct switch_dev *dev) +{ + struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); + esw->global_vlan_enable = 0; + memset(esw->ports, 0, sizeof(esw->ports)); + memset(esw->vlans, 0, sizeof(esw->vlans)); + rt305x_esw_hw_init(esw); + + return 0; +} + +static int +rt305x_esw_get_vlan_enable(struct switch_dev *dev, + const struct switch_attr *attr, + struct switch_val *val) +{ + struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); + + val->value.i = esw->global_vlan_enable; + + return 0; +} + +static int +rt305x_esw_set_vlan_enable(struct switch_dev *dev, + const struct switch_attr *attr, + struct switch_val *val) +{ + struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); + + esw->global_vlan_enable = val->value.i != 0; + + return 0; +} + +static int +rt305x_esw_get_alt_vlan_disable(struct switch_dev *dev, + const struct switch_attr *attr, + struct switch_val *val) +{ + struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); + + val->value.i = esw->alt_vlan_disable; + + return 0; +} + +static int +rt305x_esw_set_alt_vlan_disable(struct switch_dev *dev, + const struct switch_attr *attr, + struct switch_val *val) +{ + struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); + + esw->alt_vlan_disable = val->value.i != 0; + + return 0; +} + +static int +rt305x_esw_get_port_link(struct switch_dev *dev, + int port, + struct switch_port_link *link) +{ + struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); + u32 speed, poa; + + if (port < 0 || port >= RT305X_ESW_NUM_PORTS) + return -EINVAL; + + poa = rt305x_esw_rr(esw, RT305X_ESW_REG_POA) >> port; + + link->link = (poa >> RT305X_ESW_LINK_S) & 1; + link->duplex = (poa >> RT305X_ESW_DUPLEX_S) & 1; + if (port < RT305X_ESW_NUM_LEDS) { + speed = (poa >> RT305X_ESW_SPD_S) & 1; + } else { + if (port == RT305X_ESW_NUM_PORTS - 1) + poa >>= 1; + speed = (poa >> RT305X_ESW_SPD_S) & 3; + } + switch (speed) { + case 0: + link->speed = SWITCH_PORT_SPEED_10; + break; + case 1: + link->speed = SWITCH_PORT_SPEED_100; + break; + case 2: + case 3: /* forced gige speed can be 2 or 3 */ + link->speed = SWITCH_PORT_SPEED_1000; + break; + default: + link->speed = SWITCH_PORT_SPEED_UNKNOWN; + break; + } + + return 0; +} + +static int +rt305x_esw_get_port_bool(struct switch_dev *dev, + const struct switch_attr *attr, + struct switch_val *val) +{ + struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); + int idx = val->port_vlan; + u32 x, reg, shift; + + if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS) + return -EINVAL; + + switch (attr->id) { + case RT305X_ESW_ATTR_PORT_DISABLE: + reg = RT305X_ESW_REG_POC0; + shift = RT305X_ESW_POC0_DIS_PORT_S; + break; + case RT305X_ESW_ATTR_PORT_DOUBLETAG: + reg = RT305X_ESW_REG_SGC2; + shift = RT305X_ESW_SGC2_DOUBLE_TAG_S; + break; + case RT305X_ESW_ATTR_PORT_UNTAG: + reg = RT305X_ESW_REG_POC2; + shift = RT305X_ESW_POC2_UNTAG_EN_S; + break; + case RT305X_ESW_ATTR_PORT_LAN: + reg = RT305X_ESW_REG_SGC2; + shift = RT305X_ESW_SGC2_LAN_PMAP_S; + if (idx >= RT305X_ESW_NUM_LANWAN) + return -EINVAL; + break; + default: + return -EINVAL; + } + + x = rt305x_esw_rr(esw, reg); + val->value.i = (x >> (idx + shift)) & 1; + + return 0; +} + +static int +rt305x_esw_set_port_bool(struct switch_dev *dev, + const struct switch_attr *attr, + struct switch_val *val) +{ + struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); + int idx = val->port_vlan; + + if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS || + val->value.i < 0 || val->value.i > 1) + return -EINVAL; + + switch (attr->id) { + case RT305X_ESW_ATTR_PORT_DISABLE: + esw->ports[idx].disable = val->value.i; + break; + case RT305X_ESW_ATTR_PORT_DOUBLETAG: + esw->ports[idx].doubletag = val->value.i; + break; + case RT305X_ESW_ATTR_PORT_UNTAG: + esw->ports[idx].untag = val->value.i; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int +rt305x_esw_get_port_recv_badgood(struct switch_dev *dev, + const struct switch_attr *attr, + struct switch_val *val) +{ + struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); + int idx = val->port_vlan; + int shift = attr->id == RT305X_ESW_ATTR_PORT_RECV_GOOD ? 0 : 16; + u32 reg; + + if (idx < 0 || idx >= RT305X_ESW_NUM_LANWAN) + return -EINVAL; + + reg = rt305x_esw_rr(esw, RT305X_ESW_REG_P0PC + 4*idx); + val->value.i = (reg >> shift) & 0xffff; + + return 0; +} + +static int +rt305x_esw_get_port_led(struct switch_dev *dev, + const struct switch_attr *attr, + struct switch_val *val) +{ + struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); + int idx = val->port_vlan; + + if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS || + idx >= RT305X_ESW_NUM_LEDS) + return -EINVAL; + + val->value.i = rt305x_esw_rr(esw, RT305X_ESW_REG_P0LED + 4*idx); + + return 0; +} + +static int +rt305x_esw_set_port_led(struct switch_dev *dev, + const struct switch_attr *attr, + struct switch_val *val) +{ + struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); + int idx = val->port_vlan; + + if (idx < 0 || idx >= RT305X_ESW_NUM_LEDS) + return -EINVAL; + + esw->ports[idx].led = val->value.i; + + return 0; +} + +static int +rt305x_esw_get_port_pvid(struct switch_dev *dev, int port, int *val) +{ + struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); + + if (port >= RT305X_ESW_NUM_PORTS) + return -EINVAL; + + *val = rt305x_esw_get_pvid(esw, port); + + return 0; +} + +static int +rt305x_esw_set_port_pvid(struct switch_dev *dev, int port, int val) +{ + struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); + + if (port >= RT305X_ESW_NUM_PORTS) + return -EINVAL; + + esw->ports[port].pvid = val; + + return 0; +} + +static int +rt305x_esw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val) +{ + struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); + u32 vmsc, poc2; + int vlan_idx = -1; + int i; + + val->len = 0; + + if (val->port_vlan < 0 || val->port_vlan >= RT305X_ESW_NUM_VIDS) + return -EINVAL; + + /* valid vlan? */ + for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) { + if (rt305x_esw_get_vlan_id(esw, i) == val->port_vlan && + rt305x_esw_get_vmsc(esw, i) != RT305X_ESW_PORTS_NONE) { + vlan_idx = i; + break; + } + } + + if (vlan_idx == -1) + return -EINVAL; + + vmsc = rt305x_esw_get_vmsc(esw, vlan_idx); + poc2 = rt305x_esw_rr(esw, RT305X_ESW_REG_POC2); + + for (i = 0; i < RT305X_ESW_NUM_PORTS; i++) { + struct switch_port *p; + int port_mask = 1 << i; + + if (!(vmsc & port_mask)) + continue; + + p = &val->value.ports[val->len++]; + p->id = i; + if (poc2 & (port_mask << RT305X_ESW_POC2_UNTAG_EN_S)) + p->flags = 0; + else + p->flags = 1 << SWITCH_PORT_FLAG_TAGGED; + } + + return 0; +} + +static int +rt305x_esw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val) +{ + struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); + int ports; + int vlan_idx = -1; + int i; + + if (val->port_vlan < 0 || val->port_vlan >= RT305X_ESW_NUM_VIDS || + val->len > RT305X_ESW_NUM_PORTS) + return -EINVAL; + + /* one of the already defined vlans? */ + for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) { + if (esw->vlans[i].vid == val->port_vlan && + esw->vlans[i].ports != RT305X_ESW_PORTS_NONE) { + vlan_idx = i; + break; + } + } + + /* select a free slot */ + for (i = 0; vlan_idx == -1 && i < RT305X_ESW_NUM_VLANS; i++) { + if (esw->vlans[i].ports == RT305X_ESW_PORTS_NONE) + vlan_idx = i; + } + + /* bail if all slots are in use */ + if (vlan_idx == -1) + return -EINVAL; + + ports = RT305X_ESW_PORTS_NONE; + for (i = 0; i < val->len; i++) { + struct switch_port *p = &val->value.ports[i]; + int port_mask = 1 << p->id; + bool untagged = !(p->flags & (1 << SWITCH_PORT_FLAG_TAGGED)); + + if (p->id >= RT305X_ESW_NUM_PORTS) + return -EINVAL; + + ports |= port_mask; + esw->ports[p->id].untag = untagged; + } + esw->vlans[vlan_idx].ports = ports; + if (ports == RT305X_ESW_PORTS_NONE) + esw->vlans[vlan_idx].vid = RT305X_ESW_VLAN_NONE; + else + esw->vlans[vlan_idx].vid = val->port_vlan; + + return 0; +} + +static const struct switch_attr rt305x_esw_global[] = { + { + .type = SWITCH_TYPE_INT, + .name = "enable_vlan", + .description = "VLAN mode (1:enabled)", + .max = 1, + .id = RT305X_ESW_ATTR_ENABLE_VLAN, + .get = rt305x_esw_get_vlan_enable, + .set = rt305x_esw_set_vlan_enable, + }, + { + .type = SWITCH_TYPE_INT, + .name = "alternate_vlan_disable", + .description = "Use en_vlan instead of doubletag to disable" + " VLAN mode", + .max = 1, + .id = RT305X_ESW_ATTR_ALT_VLAN_DISABLE, + .get = rt305x_esw_get_alt_vlan_disable, + .set = rt305x_esw_set_alt_vlan_disable, + }, +}; + +static const struct switch_attr rt305x_esw_port[] = { + { + .type = SWITCH_TYPE_INT, + .name = "disable", + .description = "Port state (1:disabled)", + .max = 1, + .id = RT305X_ESW_ATTR_PORT_DISABLE, + .get = rt305x_esw_get_port_bool, + .set = rt305x_esw_set_port_bool, + }, + { + .type = SWITCH_TYPE_INT, + .name = "doubletag", + .description = "Double tagging for incoming vlan packets " + "(1:enabled)", + .max = 1, + .id = RT305X_ESW_ATTR_PORT_DOUBLETAG, + .get = rt305x_esw_get_port_bool, + .set = rt305x_esw_set_port_bool, + }, + { + .type = SWITCH_TYPE_INT, + .name = "untag", + .description = "Untag (1:strip outgoing vlan tag)", + .max = 1, + .id = RT305X_ESW_ATTR_PORT_UNTAG, + .get = rt305x_esw_get_port_bool, + .set = rt305x_esw_set_port_bool, + }, + { + .type = SWITCH_TYPE_INT, + .name = "led", + .description = "LED mode (0:link, 1:100m, 2:duplex, 3:activity," + " 4:collision, 5:linkact, 6:duplcoll, 7:10mact," + " 8:100mact, 10:blink, 12:on)", + .max = 15, + .id = RT305X_ESW_ATTR_PORT_LED, + .get = rt305x_esw_get_port_led, + .set = rt305x_esw_set_port_led, + }, + { + .type = SWITCH_TYPE_INT, + .name = "lan", + .description = "HW port group (0:wan, 1:lan)", + .max = 1, + .id = RT305X_ESW_ATTR_PORT_LAN, + .get = rt305x_esw_get_port_bool, + }, + { + .type = SWITCH_TYPE_INT, + .name = "recv_bad", + .description = "Receive bad packet counter", + .id = RT305X_ESW_ATTR_PORT_RECV_BAD, + .get = rt305x_esw_get_port_recv_badgood, + }, + { + .type = SWITCH_TYPE_INT, + .name = "recv_good", + .description = "Receive good packet counter", + .id = RT305X_ESW_ATTR_PORT_RECV_GOOD, + .get = rt305x_esw_get_port_recv_badgood, + }, +}; + +static const struct switch_attr rt305x_esw_vlan[] = { +}; + +static const struct switch_dev_ops rt305x_esw_ops = { + .attr_global = { + .attr = rt305x_esw_global, + .n_attr = ARRAY_SIZE(rt305x_esw_global), + }, + .attr_port = { + .attr = rt305x_esw_port, + .n_attr = ARRAY_SIZE(rt305x_esw_port), + }, + .attr_vlan = { + .attr = rt305x_esw_vlan, + .n_attr = ARRAY_SIZE(rt305x_esw_vlan), + }, + .get_vlan_ports = rt305x_esw_get_vlan_ports, + .set_vlan_ports = rt305x_esw_set_vlan_ports, + .get_port_pvid = rt305x_esw_get_port_pvid, + .set_port_pvid = rt305x_esw_set_port_pvid, + .get_port_link = rt305x_esw_get_port_link, + .apply_config = rt305x_esw_apply_config, + .reset_switch = rt305x_esw_reset_switch, +}; + +static int +rt305x_esw_probe(struct platform_device *pdev) +{ + struct rt305x_esw_platform_data *pdata; + struct rt305x_esw *esw; + struct switch_dev *swdev; + struct resource *res; + int err; + + pdata = pdev->dev.platform_data; + if (!pdata) + return -EINVAL; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "no memory resource found\n"); + return -ENOMEM; + } + + esw = kzalloc(sizeof(struct rt305x_esw), GFP_KERNEL); + if (!esw) { + dev_err(&pdev->dev, "no memory for private data\n"); + return -ENOMEM; + } + + esw->base = ioremap(res->start, resource_size(res)); + if (!esw->base) { + dev_err(&pdev->dev, "ioremap failed\n"); + err = -ENOMEM; + goto free_esw; + } + + swdev = &esw->swdev; + swdev->name = "rt305x-esw"; + swdev->alias = "rt305x"; + swdev->cpu_port = RT305X_ESW_PORT6; + swdev->ports = RT305X_ESW_NUM_PORTS; + swdev->vlans = RT305X_ESW_NUM_VIDS; + swdev->ops = &rt305x_esw_ops; + + err = register_switch(swdev, NULL); + if (err < 0) { + dev_err(&pdev->dev, "register_switch failed\n"); + goto unmap_base; + } + + platform_set_drvdata(pdev, esw); + + esw->pdata = pdata; + spin_lock_init(&esw->reg_rw_lock); + rt305x_esw_hw_init(esw); + + return 0; + +unmap_base: + iounmap(esw->base); +free_esw: + kfree(esw); + return err; +} + +static int +rt305x_esw_remove(struct platform_device *pdev) +{ + struct rt305x_esw *esw; + + esw = platform_get_drvdata(pdev); + if (esw) { + unregister_switch(&esw->swdev); + platform_set_drvdata(pdev, NULL); + iounmap(esw->base); + kfree(esw); + } + + return 0; +} + +static struct platform_driver rt305x_esw_driver = { + .probe = rt305x_esw_probe, + .remove = rt305x_esw_remove, + .driver = { + .name = "rt305x-esw", + .owner = THIS_MODULE, + }, +}; + +static int __init +rt305x_esw_init(void) +{ + return platform_driver_register(&rt305x_esw_driver); +} + +static void +rt305x_esw_exit(void) +{ + platform_driver_unregister(&rt305x_esw_driver); +} diff --git a/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_eth.h b/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_eth.h new file mode 100644 index 0000000000..66187030b9 --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_eth.h @@ -0,0 +1,358 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + * + * based on Ralink SDK3.3 + * Copyright (C) 2009 John Crispin <blogic@openwrt.org> + */ + +#ifndef RAMIPS_ETH_H +#define RAMIPS_ETH_H + +#include <linux/mii.h> +#include <linux/interrupt.h> +#include <linux/netdevice.h> +#include <linux/dma-mapping.h> + +#define NUM_RX_DESC 256 +#define NUM_TX_DESC 256 + +#define RAMIPS_DELAY_EN_INT 0x80 +#define RAMIPS_DELAY_MAX_INT 0x04 +#define RAMIPS_DELAY_MAX_TOUT 0x04 +#define RAMIPS_DELAY_CHAN (((RAMIPS_DELAY_EN_INT | RAMIPS_DELAY_MAX_INT) << 8) | RAMIPS_DELAY_MAX_TOUT) +#define RAMIPS_DELAY_INIT ((RAMIPS_DELAY_CHAN << 16) | RAMIPS_DELAY_CHAN) +#define RAMIPS_PSE_FQFC_CFG_INIT 0x80504000 + +/* interrupt bits */ +#define RAMIPS_CNT_PPE_AF BIT(31) +#define RAMIPS_CNT_GDM_AF BIT(29) +#define RAMIPS_PSE_P2_FC BIT(26) +#define RAMIPS_PSE_BUF_DROP BIT(24) +#define RAMIPS_GDM_OTHER_DROP BIT(23) +#define RAMIPS_PSE_P1_FC BIT(22) +#define RAMIPS_PSE_P0_FC BIT(21) +#define RAMIPS_PSE_FQ_EMPTY BIT(20) +#define RAMIPS_GE1_STA_CHG BIT(18) +#define RAMIPS_TX_COHERENT BIT(17) +#define RAMIPS_RX_COHERENT BIT(16) +#define RAMIPS_TX_DONE_INT3 BIT(11) +#define RAMIPS_TX_DONE_INT2 BIT(10) +#define RAMIPS_TX_DONE_INT1 BIT(9) +#define RAMIPS_TX_DONE_INT0 BIT(8) +#define RAMIPS_RX_DONE_INT0 BIT(2) +#define RAMIPS_TX_DLY_INT BIT(1) +#define RAMIPS_RX_DLY_INT BIT(0) + +#define RT5350_RX_DLY_INT BIT(30) +#define RT5350_TX_DLY_INT BIT(28) + +/* registers */ +#define RAMIPS_FE_OFFSET 0x0000 +#define RAMIPS_GDMA_OFFSET 0x0020 +#define RAMIPS_PSE_OFFSET 0x0040 +#define RAMIPS_GDMA2_OFFSET 0x0060 +#define RAMIPS_CDMA_OFFSET 0x0080 +#define RAMIPS_PDMA_OFFSET 0x0100 +#define RAMIPS_PPE_OFFSET 0x0200 +#define RAMIPS_CMTABLE_OFFSET 0x0400 +#define RAMIPS_POLICYTABLE_OFFSET 0x1000 + +#define RT5350_PDMA_OFFSET 0x0800 +#define RT5350_SDM_OFFSET 0x0c00 + +#define RAMIPS_MDIO_ACCESS (RAMIPS_FE_OFFSET + 0x00) +#define RAMIPS_MDIO_CFG (RAMIPS_FE_OFFSET + 0x04) +#define RAMIPS_FE_GLO_CFG (RAMIPS_FE_OFFSET + 0x08) +#define RAMIPS_FE_RST_GL (RAMIPS_FE_OFFSET + 0x0C) +#define RAMIPS_FE_INT_STATUS (RAMIPS_FE_OFFSET + 0x10) +#define RAMIPS_FE_INT_ENABLE (RAMIPS_FE_OFFSET + 0x14) +#define RAMIPS_MDIO_CFG2 (RAMIPS_FE_OFFSET + 0x18) +#define RAMIPS_FOC_TS_T (RAMIPS_FE_OFFSET + 0x1C) + +#define RAMIPS_GDMA1_FWD_CFG (RAMIPS_GDMA_OFFSET + 0x00) +#define RAMIPS_GDMA1_SCH_CFG (RAMIPS_GDMA_OFFSET + 0x04) +#define RAMIPS_GDMA1_SHPR_CFG (RAMIPS_GDMA_OFFSET + 0x08) +#define RAMIPS_GDMA1_MAC_ADRL (RAMIPS_GDMA_OFFSET + 0x0C) +#define RAMIPS_GDMA1_MAC_ADRH (RAMIPS_GDMA_OFFSET + 0x10) + +#define RAMIPS_GDMA2_FWD_CFG (RAMIPS_GDMA2_OFFSET + 0x00) +#define RAMIPS_GDMA2_SCH_CFG (RAMIPS_GDMA2_OFFSET + 0x04) +#define RAMIPS_GDMA2_SHPR_CFG (RAMIPS_GDMA2_OFFSET + 0x08) +#define RAMIPS_GDMA2_MAC_ADRL (RAMIPS_GDMA2_OFFSET + 0x0C) +#define RAMIPS_GDMA2_MAC_ADRH (RAMIPS_GDMA2_OFFSET + 0x10) + +#define RAMIPS_PSE_FQ_CFG (RAMIPS_PSE_OFFSET + 0x00) +#define RAMIPS_CDMA_FC_CFG (RAMIPS_PSE_OFFSET + 0x04) +#define RAMIPS_GDMA1_FC_CFG (RAMIPS_PSE_OFFSET + 0x08) +#define RAMIPS_GDMA2_FC_CFG (RAMIPS_PSE_OFFSET + 0x0C) + +#define RAMIPS_CDMA_CSG_CFG (RAMIPS_CDMA_OFFSET + 0x00) +#define RAMIPS_CDMA_SCH_CFG (RAMIPS_CDMA_OFFSET + 0x04) + +#define RT5350_TX_BASE_PTR0 (RT5350_PDMA_OFFSET + 0x00) +#define RT5350_TX_MAX_CNT0 (RT5350_PDMA_OFFSET + 0x04) +#define RT5350_TX_CTX_IDX0 (RT5350_PDMA_OFFSET + 0x08) +#define RT5350_TX_DTX_IDX0 (RT5350_PDMA_OFFSET + 0x0C) +#define RT5350_TX_BASE_PTR1 (RT5350_PDMA_OFFSET + 0x10) +#define RT5350_TX_MAX_CNT1 (RT5350_PDMA_OFFSET + 0x14) +#define RT5350_TX_CTX_IDX1 (RT5350_PDMA_OFFSET + 0x18) +#define RT5350_TX_DTX_IDX1 (RT5350_PDMA_OFFSET + 0x1C) +#define RT5350_TX_BASE_PTR2 (RT5350_PDMA_OFFSET + 0x20) +#define RT5350_TX_MAX_CNT2 (RT5350_PDMA_OFFSET + 0x24) +#define RT5350_TX_CTX_IDX2 (RT5350_PDMA_OFFSET + 0x28) +#define RT5350_TX_DTX_IDX2 (RT5350_PDMA_OFFSET + 0x2C) +#define RT5350_TX_BASE_PTR3 (RT5350_PDMA_OFFSET + 0x30) +#define RT5350_TX_MAX_CNT3 (RT5350_PDMA_OFFSET + 0x34) +#define RT5350_TX_CTX_IDX3 (RT5350_PDMA_OFFSET + 0x38) +#define RT5350_TX_DTX_IDX3 (RT5350_PDMA_OFFSET + 0x3C) +#define RT5350_RX_BASE_PTR0 (RT5350_PDMA_OFFSET + 0x100) +#define RT5350_RX_MAX_CNT0 (RT5350_PDMA_OFFSET + 0x104) +#define RT5350_RX_CALC_IDX0 (RT5350_PDMA_OFFSET + 0x108) +#define RT5350_RX_DRX_IDX0 (RT5350_PDMA_OFFSET + 0x10C) +#define RT5350_RX_BASE_PTR1 (RT5350_PDMA_OFFSET + 0x110) +#define RT5350_RX_MAX_CNT1 (RT5350_PDMA_OFFSET + 0x114) +#define RT5350_RX_CALC_IDX1 (RT5350_PDMA_OFFSET + 0x118) +#define RT5350_RX_DRX_IDX1 (RT5350_PDMA_OFFSET + 0x11C) +#define RT5350_PDMA_GLO_CFG (RT5350_PDMA_OFFSET + 0x204) +#define RT5350_PDMA_RST_CFG (RT5350_PDMA_OFFSET + 0x208) +#define RT5350_DLY_INT_CFG (RT5350_PDMA_OFFSET + 0x20c) +#define RT5350_FE_INT_STATUS (RT5350_PDMA_OFFSET + 0x220) +#define RT5350_FE_INT_ENABLE (RT5350_PDMA_OFFSET + 0x228) +#define RT5350_PDMA_SCH_CFG (RT5350_PDMA_OFFSET + 0x280) + + +#define RAMIPS_PDMA_GLO_CFG (RAMIPS_PDMA_OFFSET + 0x00) +#define RAMIPS_PDMA_RST_CFG (RAMIPS_PDMA_OFFSET + 0x04) +#define RAMIPS_PDMA_SCH_CFG (RAMIPS_PDMA_OFFSET + 0x08) +#define RAMIPS_DLY_INT_CFG (RAMIPS_PDMA_OFFSET + 0x0C) +#define RAMIPS_TX_BASE_PTR0 (RAMIPS_PDMA_OFFSET + 0x10) +#define RAMIPS_TX_MAX_CNT0 (RAMIPS_PDMA_OFFSET + 0x14) +#define RAMIPS_TX_CTX_IDX0 (RAMIPS_PDMA_OFFSET + 0x18) +#define RAMIPS_TX_DTX_IDX0 (RAMIPS_PDMA_OFFSET + 0x1C) +#define RAMIPS_TX_BASE_PTR1 (RAMIPS_PDMA_OFFSET + 0x20) +#define RAMIPS_TX_MAX_CNT1 (RAMIPS_PDMA_OFFSET + 0x24) +#define RAMIPS_TX_CTX_IDX1 (RAMIPS_PDMA_OFFSET + 0x28) +#define RAMIPS_TX_DTX_IDX1 (RAMIPS_PDMA_OFFSET + 0x2C) +#define RAMIPS_RX_BASE_PTR0 (RAMIPS_PDMA_OFFSET + 0x30) +#define RAMIPS_RX_MAX_CNT0 (RAMIPS_PDMA_OFFSET + 0x34) +#define RAMIPS_RX_CALC_IDX0 (RAMIPS_PDMA_OFFSET + 0x38) +#define RAMIPS_RX_DRX_IDX0 (RAMIPS_PDMA_OFFSET + 0x3C) +#define RAMIPS_TX_BASE_PTR2 (RAMIPS_PDMA_OFFSET + 0x40) +#define RAMIPS_TX_MAX_CNT2 (RAMIPS_PDMA_OFFSET + 0x44) +#define RAMIPS_TX_CTX_IDX2 (RAMIPS_PDMA_OFFSET + 0x48) +#define RAMIPS_TX_DTX_IDX2 (RAMIPS_PDMA_OFFSET + 0x4C) +#define RAMIPS_TX_BASE_PTR3 (RAMIPS_PDMA_OFFSET + 0x50) +#define RAMIPS_TX_MAX_CNT3 (RAMIPS_PDMA_OFFSET + 0x54) +#define RAMIPS_TX_CTX_IDX3 (RAMIPS_PDMA_OFFSET + 0x58) +#define RAMIPS_TX_DTX_IDX3 (RAMIPS_PDMA_OFFSET + 0x5C) +#define RAMIPS_RX_BASE_PTR1 (RAMIPS_PDMA_OFFSET + 0x60) +#define RAMIPS_RX_MAX_CNT1 (RAMIPS_PDMA_OFFSET + 0x64) +#define RAMIPS_RX_CALC_IDX1 (RAMIPS_PDMA_OFFSET + 0x68) +#define RAMIPS_RX_DRX_IDX1 (RAMIPS_PDMA_OFFSET + 0x6C) + +#define RT5350_SDM_CFG (RT5350_SDM_OFFSET + 0x00) //Switch DMA configuration +#define RT5350_SDM_RRING (RT5350_SDM_OFFSET + 0x04) //Switch DMA Rx Ring +#define RT5350_SDM_TRING (RT5350_SDM_OFFSET + 0x08) //Switch DMA Tx Ring +#define RT5350_SDM_MAC_ADRL (RT5350_SDM_OFFSET + 0x0C) //Switch MAC address LSB +#define RT5350_SDM_MAC_ADRH (RT5350_SDM_OFFSET + 0x10) //Switch MAC Address MSB +#define RT5350_SDM_TPCNT (RT5350_SDM_OFFSET + 0x100) //Switch DMA Tx packet count +#define RT5350_SDM_TBCNT (RT5350_SDM_OFFSET + 0x104) //Switch DMA Tx byte count +#define RT5350_SDM_RPCNT (RT5350_SDM_OFFSET + 0x108) //Switch DMA rx packet count +#define RT5350_SDM_RBCNT (RT5350_SDM_OFFSET + 0x10C) //Switch DMA rx byte count +#define RT5350_SDM_CS_ERR (RT5350_SDM_OFFSET + 0x110) //Switch DMA rx checksum error count + +#define RT5350_SDM_ICS_EN BIT(16) +#define RT5350_SDM_TCS_EN BIT(17) +#define RT5350_SDM_UCS_EN BIT(18) + + +/* MDIO_CFG register bits */ +#define RAMIPS_MDIO_CFG_AUTO_POLL_EN BIT(29) +#define RAMIPS_MDIO_CFG_GP1_BP_EN BIT(16) +#define RAMIPS_MDIO_CFG_GP1_FRC_EN BIT(15) +#define RAMIPS_MDIO_CFG_GP1_SPEED_10 (0 << 13) +#define RAMIPS_MDIO_CFG_GP1_SPEED_100 (1 << 13) +#define RAMIPS_MDIO_CFG_GP1_SPEED_1000 (2 << 13) +#define RAMIPS_MDIO_CFG_GP1_DUPLEX BIT(12) +#define RAMIPS_MDIO_CFG_GP1_FC_TX BIT(11) +#define RAMIPS_MDIO_CFG_GP1_FC_RX BIT(10) +#define RAMIPS_MDIO_CFG_GP1_LNK_DWN BIT(9) +#define RAMIPS_MDIO_CFG_GP1_AN_FAIL BIT(8) +#define RAMIPS_MDIO_CFG_MDC_CLK_DIV_1 (0 << 6) +#define RAMIPS_MDIO_CFG_MDC_CLK_DIV_2 (1 << 6) +#define RAMIPS_MDIO_CFG_MDC_CLK_DIV_4 (2 << 6) +#define RAMIPS_MDIO_CFG_MDC_CLK_DIV_8 (3 << 6) +#define RAMIPS_MDIO_CFG_TURBO_MII_FREQ BIT(5) +#define RAMIPS_MDIO_CFG_TURBO_MII_MODE BIT(4) +#define RAMIPS_MDIO_CFG_RX_CLK_SKEW_0 (0 << 2) +#define RAMIPS_MDIO_CFG_RX_CLK_SKEW_200 (1 << 2) +#define RAMIPS_MDIO_CFG_RX_CLK_SKEW_400 (2 << 2) +#define RAMIPS_MDIO_CFG_RX_CLK_SKEW_INV (3 << 2) +#define RAMIPS_MDIO_CFG_TX_CLK_SKEW_0 0 +#define RAMIPS_MDIO_CFG_TX_CLK_SKEW_200 1 +#define RAMIPS_MDIO_CFG_TX_CLK_SKEW_400 2 +#define RAMIPS_MDIO_CFG_TX_CLK_SKEW_INV 3 + +/* uni-cast port */ +#define RAMIPS_GDM1_ICS_EN BIT(22) +#define RAMIPS_GDM1_TCS_EN BIT(21) +#define RAMIPS_GDM1_UCS_EN BIT(20) +#define RAMIPS_GDM1_JMB_EN BIT(19) +#define RAMIPS_GDM1_STRPCRC BIT(16) +#define RAMIPS_GDM1_UFRC_P_CPU (0 << 12) +#define RAMIPS_GDM1_UFRC_P_GDMA1 (1 << 12) +#define RAMIPS_GDM1_UFRC_P_PPE (6 << 12) + +/* checksums */ +#define RAMIPS_ICS_GEN_EN BIT(2) +#define RAMIPS_UCS_GEN_EN BIT(1) +#define RAMIPS_TCS_GEN_EN BIT(0) + +/* dma ring */ +#define RAMIPS_PST_DRX_IDX0 BIT(16) +#define RAMIPS_PST_DTX_IDX3 BIT(3) +#define RAMIPS_PST_DTX_IDX2 BIT(2) +#define RAMIPS_PST_DTX_IDX1 BIT(1) +#define RAMIPS_PST_DTX_IDX0 BIT(0) + +#define RAMIPS_TX_WB_DDONE BIT(6) +#define RAMIPS_RX_DMA_BUSY BIT(3) +#define RAMIPS_TX_DMA_BUSY BIT(1) +#define RAMIPS_RX_DMA_EN BIT(2) +#define RAMIPS_TX_DMA_EN BIT(0) + +#define RAMIPS_PDMA_SIZE_4DWORDS (0 << 4) +#define RAMIPS_PDMA_SIZE_8DWORDS (1 << 4) +#define RAMIPS_PDMA_SIZE_16DWORDS (2 << 4) + +#define RAMIPS_US_CYC_CNT_MASK 0xff +#define RAMIPS_US_CYC_CNT_SHIFT 0x8 +#define RAMIPS_US_CYC_CNT_DIVISOR 1000000 + +#define RX_DMA_PLEN0(_x) (((_x) >> 16) & 0x3fff) +#define RX_DMA_LSO BIT(30) +#define RX_DMA_DONE BIT(31) + +struct ramips_rx_dma { + unsigned int rxd1; + unsigned int rxd2; + unsigned int rxd3; + unsigned int rxd4; +} __packed __aligned(4); + +#define TX_DMA_PLEN0_MASK ((0x3fff) << 16) +#define TX_DMA_PLEN0(_x) (((_x) & 0x3fff) << 16) +#define TX_DMA_LSO BIT(30) +#define TX_DMA_DONE BIT(31) +#define TX_DMA_QN(_x) ((_x) << 16) +#define TX_DMA_PN(_x) ((_x) << 24) +#define TX_DMA_QN_MASK TX_DMA_QN(0x7) +#define TX_DMA_PN_MASK TX_DMA_PN(0x7) + +struct ramips_tx_dma { + unsigned int txd1; + unsigned int txd2; + unsigned int txd3; + unsigned int txd4; +} __packed __aligned(4); + +struct raeth_tx_info { + struct ramips_tx_dma *tx_desc; + struct sk_buff *tx_skb; +}; + +struct raeth_rx_info { + struct ramips_rx_dma *rx_desc; + struct sk_buff *rx_skb; + dma_addr_t rx_dma; + unsigned int pad; +}; + +struct raeth_int_stats { + unsigned long rx_delayed; + unsigned long tx_delayed; + unsigned long rx_done0; + unsigned long tx_done0; + unsigned long tx_done1; + unsigned long tx_done2; + unsigned long tx_done3; + unsigned long rx_coherent; + unsigned long tx_coherent; + + unsigned long pse_fq_empty; + unsigned long pse_p0_fc; + unsigned long pse_p1_fc; + unsigned long pse_p2_fc; + unsigned long pse_buf_drop; + + unsigned long total; +}; + +struct raeth_debug { + struct dentry *debugfs_dir; + + struct raeth_int_stats int_stats; +}; + +struct raeth_priv +{ + struct raeth_rx_info *rx_info; + dma_addr_t rx_desc_dma; + struct tasklet_struct rx_tasklet; + struct ramips_rx_dma *rx; + + struct raeth_tx_info *tx_info; + dma_addr_t tx_desc_dma; + struct tasklet_struct tx_housekeeping_tasklet; + struct ramips_tx_dma *tx; + + unsigned int skb_free_idx; + + spinlock_t page_lock; + struct net_device *netdev; + struct device *parent; + struct ramips_eth_platform_data *plat; + + int link; + int speed; + int duplex; + int tx_fc; + int rx_fc; + + struct mii_bus *mii_bus; + int mii_irq[PHY_MAX_ADDR]; + struct phy_device *phy_dev; + spinlock_t phy_lock; + +#ifdef CONFIG_NET_RAMIPS_DEBUG_FS + struct raeth_debug debug; +#endif +}; + +#ifdef CONFIG_NET_RAMIPS_DEBUG_FS +int raeth_debugfs_root_init(void); +void raeth_debugfs_root_exit(void); +int raeth_debugfs_init(struct raeth_priv *re); +void raeth_debugfs_exit(struct raeth_priv *re); +void raeth_debugfs_update_int_stats(struct raeth_priv *re, u32 status); +#else +static inline int raeth_debugfs_root_init(void) { return 0; } +static inline void raeth_debugfs_root_exit(void) {} +static inline int raeth_debugfs_init(struct raeth_priv *re) { return 0; } +static inline void raeth_debugfs_exit(struct raeth_priv *re) {} +static inline void raeth_debugfs_update_int_stats(struct raeth_priv *re, + u32 status) {} +#endif /* CONFIG_NET_RAMIPS_DEBUG_FS */ + +#endif /* RAMIPS_ETH_H */ diff --git a/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_main.c b/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_main.c new file mode 100644 index 0000000000..267860ff0f --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/net/ethernet/ramips/ramips_main.c @@ -0,0 +1,1212 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2009 John Crispin <blogic@openwrt.org> + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/dma-mapping.h> +#include <linux/init.h> +#include <linux/skbuff.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/platform_device.h> +#include <linux/phy.h> + +#include <ramips_eth_platform.h> +#include "ramips_eth.h" + +#define TX_TIMEOUT (20 * HZ / 100) +#define MAX_RX_LENGTH 1600 + +#ifdef CONFIG_RALINK_RT305X +#include <rt305x.h> +#include "ramips_esw.c" +#else +static inline int rt305x_esw_init(void) { return 0; } +static inline void rt305x_esw_exit(void) { } +static inline int soc_is_rt5350(void) { return 0; } +#endif + +#define phys_to_bus(a) (a & 0x1FFFFFFF) + +#ifdef CONFIG_NET_RAMIPS_DEBUG +#define RADEBUG(fmt, args...) printk(KERN_DEBUG fmt, ## args) +#else +#define RADEBUG(fmt, args...) do {} while (0) +#endif + +#define RX_DLY_INT ((soc_is_rt5350())?(RT5350_RX_DLY_INT):(RAMIPS_RX_DLY_INT)) +#define TX_DLY_INT ((soc_is_rt5350())?(RT5350_TX_DLY_INT):(RAMIPS_TX_DLY_INT)) + +enum raeth_reg { + RAETH_REG_PDMA_GLO_CFG = 0, + RAETH_REG_PDMA_RST_CFG, + RAETH_REG_DLY_INT_CFG, + RAETH_REG_TX_BASE_PTR0, + RAETH_REG_TX_MAX_CNT0, + RAETH_REG_TX_CTX_IDX0, + RAETH_REG_RX_BASE_PTR0, + RAETH_REG_RX_MAX_CNT0, + RAETH_REG_RX_CALC_IDX0, + RAETH_REG_FE_INT_ENABLE, + RAETH_REG_FE_INT_STATUS, + RAETH_REG_COUNT +}; + +static const u32 ramips_reg_table[RAETH_REG_COUNT] = { + [RAETH_REG_PDMA_GLO_CFG] = RAMIPS_PDMA_GLO_CFG, + [RAETH_REG_PDMA_RST_CFG] = RAMIPS_PDMA_RST_CFG, + [RAETH_REG_DLY_INT_CFG] = RAMIPS_DLY_INT_CFG, + [RAETH_REG_TX_BASE_PTR0] = RAMIPS_TX_BASE_PTR0, + [RAETH_REG_TX_MAX_CNT0] = RAMIPS_TX_MAX_CNT0, + [RAETH_REG_TX_CTX_IDX0] = RAMIPS_TX_CTX_IDX0, + [RAETH_REG_RX_BASE_PTR0] = RAMIPS_RX_BASE_PTR0, + [RAETH_REG_RX_MAX_CNT0] = RAMIPS_RX_MAX_CNT0, + [RAETH_REG_RX_CALC_IDX0] = RAMIPS_RX_CALC_IDX0, + [RAETH_REG_FE_INT_ENABLE] = RAMIPS_FE_INT_ENABLE, + [RAETH_REG_FE_INT_STATUS] = RAMIPS_FE_INT_STATUS, +}; + +static const u32 rt5350_reg_table[RAETH_REG_COUNT] = { + [RAETH_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG, + [RAETH_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG, + [RAETH_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG, + [RAETH_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0, + [RAETH_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0, + [RAETH_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0, + [RAETH_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0, + [RAETH_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0, + [RAETH_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0, + [RAETH_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE, + [RAETH_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS, +}; + +static struct net_device * ramips_dev; +static void __iomem *ramips_fe_base = 0; + +static inline u32 get_reg_offset(enum raeth_reg reg) +{ + const u32 *table; + + if (soc_is_rt5350()) + table = rt5350_reg_table; + else + table = ramips_reg_table; + + return table[reg]; +} + +static inline void +ramips_fe_wr(u32 val, unsigned reg) +{ + __raw_writel(val, ramips_fe_base + reg); +} + +static inline u32 +ramips_fe_rr(unsigned reg) +{ + return __raw_readl(ramips_fe_base + reg); +} + +static inline void +ramips_fe_twr(u32 val, enum raeth_reg reg) +{ + ramips_fe_wr(val, get_reg_offset(reg)); +} + +static inline u32 +ramips_fe_trr(enum raeth_reg reg) +{ + return ramips_fe_rr(get_reg_offset(reg)); +} + +static inline void +ramips_fe_int_disable(u32 mask) +{ + ramips_fe_twr(ramips_fe_trr(RAETH_REG_FE_INT_ENABLE) & ~mask, + RAETH_REG_FE_INT_ENABLE); + /* flush write */ + ramips_fe_trr(RAETH_REG_FE_INT_ENABLE); +} + +static inline void +ramips_fe_int_enable(u32 mask) +{ + ramips_fe_twr(ramips_fe_trr(RAETH_REG_FE_INT_ENABLE) | mask, + RAETH_REG_FE_INT_ENABLE); + /* flush write */ + ramips_fe_trr(RAETH_REG_FE_INT_ENABLE); +} + +static inline void +ramips_hw_set_macaddr(unsigned char *mac) +{ + if (soc_is_rt5350()) { + ramips_fe_wr((mac[0] << 8) | mac[1], RT5350_SDM_MAC_ADRH); + ramips_fe_wr((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5], + RT5350_SDM_MAC_ADRL); + } else { + ramips_fe_wr((mac[0] << 8) | mac[1], RAMIPS_GDMA1_MAC_ADRH); + ramips_fe_wr((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5], + RAMIPS_GDMA1_MAC_ADRL); + } +} + +static struct sk_buff * +ramips_alloc_skb(struct raeth_priv *re) +{ + struct sk_buff *skb; + + skb = netdev_alloc_skb(re->netdev, MAX_RX_LENGTH + NET_IP_ALIGN); + if (!skb) + return NULL; + + skb_reserve(skb, NET_IP_ALIGN); + + return skb; +} + +static void +ramips_ring_setup(struct raeth_priv *re) +{ + int len; + int i; + + memset(re->tx_info, 0, NUM_TX_DESC * sizeof(struct raeth_tx_info)); + + len = NUM_TX_DESC * sizeof(struct ramips_tx_dma); + memset(re->tx, 0, len); + + for (i = 0; i < NUM_TX_DESC; i++) { + struct raeth_tx_info *txi; + struct ramips_tx_dma *txd; + + txd = &re->tx[i]; + txd->txd4 = TX_DMA_QN(3) | TX_DMA_PN(1); + txd->txd2 = TX_DMA_LSO | TX_DMA_DONE; + + txi = &re->tx_info[i]; + txi->tx_desc = txd; + if (txi->tx_skb != NULL) { + netdev_warn(re->netdev, + "dirty skb for TX desc %d\n", i); + txi->tx_skb = NULL; + } + } + + len = NUM_RX_DESC * sizeof(struct ramips_rx_dma); + memset(re->rx, 0, len); + + for (i = 0; i < NUM_RX_DESC; i++) { + struct raeth_rx_info *rxi; + struct ramips_rx_dma *rxd; + dma_addr_t dma_addr; + + rxd = &re->rx[i]; + rxi = &re->rx_info[i]; + BUG_ON(rxi->rx_skb == NULL); + dma_addr = dma_map_single(&re->netdev->dev, rxi->rx_skb->data, + MAX_RX_LENGTH, DMA_FROM_DEVICE); + rxi->rx_dma = dma_addr; + rxi->rx_desc = rxd; + + rxd->rxd1 = (unsigned int) dma_addr; + rxd->rxd2 = RX_DMA_LSO; + } + + /* flush descriptors */ + wmb(); +} + +static void +ramips_ring_cleanup(struct raeth_priv *re) +{ + int i; + + for (i = 0; i < NUM_RX_DESC; i++) { + struct raeth_rx_info *rxi; + + rxi = &re->rx_info[i]; + if (rxi->rx_skb) + dma_unmap_single(&re->netdev->dev, rxi->rx_dma, + MAX_RX_LENGTH, DMA_FROM_DEVICE); + } + + for (i = 0; i < NUM_TX_DESC; i++) { + struct raeth_tx_info *txi; + + txi = &re->tx_info[i]; + if (txi->tx_skb) { + dev_kfree_skb_any(txi->tx_skb); + txi->tx_skb = NULL; + } + } + + netdev_reset_queue(re->netdev); +} + +#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT3883) + +#define RAMIPS_MDIO_RETRY 1000 + +static unsigned char *ramips_speed_str(struct raeth_priv *re) +{ + switch (re->speed) { + case SPEED_1000: + return "1000"; + case SPEED_100: + return "100"; + case SPEED_10: + return "10"; + } + + return "?"; +} + +static void ramips_link_adjust(struct raeth_priv *re) +{ + struct ramips_eth_platform_data *pdata; + u32 mdio_cfg; + + pdata = re->parent->platform_data; + if (!re->link) { + netif_carrier_off(re->netdev); + netdev_info(re->netdev, "link down\n"); + return; + } + + mdio_cfg = RAMIPS_MDIO_CFG_TX_CLK_SKEW_200 | + RAMIPS_MDIO_CFG_TX_CLK_SKEW_200 | + RAMIPS_MDIO_CFG_GP1_FRC_EN; + + if (re->duplex == DUPLEX_FULL) + mdio_cfg |= RAMIPS_MDIO_CFG_GP1_DUPLEX; + + if (re->tx_fc) + mdio_cfg |= RAMIPS_MDIO_CFG_GP1_FC_TX; + + if (re->rx_fc) + mdio_cfg |= RAMIPS_MDIO_CFG_GP1_FC_RX; + + switch (re->speed) { + case SPEED_10: + mdio_cfg |= RAMIPS_MDIO_CFG_GP1_SPEED_10; + break; + case SPEED_100: + mdio_cfg |= RAMIPS_MDIO_CFG_GP1_SPEED_100; + break; + case SPEED_1000: + mdio_cfg |= RAMIPS_MDIO_CFG_GP1_SPEED_1000; + break; + default: + BUG(); + } + + ramips_fe_wr(mdio_cfg, RAMIPS_MDIO_CFG); + + netif_carrier_on(re->netdev); + netdev_info(re->netdev, "link up (%sMbps/%s duplex)\n", + ramips_speed_str(re), + (DUPLEX_FULL == re->duplex) ? "Full" : "Half"); +} + +static int +ramips_mdio_wait_ready(struct raeth_priv *re) +{ + int retries; + + retries = RAMIPS_MDIO_RETRY; + while (1) { + u32 t; + + t = ramips_fe_rr(RAMIPS_MDIO_ACCESS); + if ((t & (0x1 << 31)) == 0) + return 0; + + if (retries-- == 0) + break; + + udelay(1); + } + + dev_err(re->parent, "MDIO operation timed out\n"); + return -ETIMEDOUT; +} + +static int +ramips_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg) +{ + struct raeth_priv *re = bus->priv; + int err; + u32 t; + + err = ramips_mdio_wait_ready(re); + if (err) + return 0xffff; + + t = (phy_addr << 24) | (phy_reg << 16); + ramips_fe_wr(t, RAMIPS_MDIO_ACCESS); + t |= (1 << 31); + ramips_fe_wr(t, RAMIPS_MDIO_ACCESS); + + err = ramips_mdio_wait_ready(re); + if (err) + return 0xffff; + + RADEBUG("%s: addr=%04x, reg=%04x, value=%04x\n", __func__, + phy_addr, phy_reg, ramips_fe_rr(RAMIPS_MDIO_ACCESS) & 0xffff); + + return ramips_fe_rr(RAMIPS_MDIO_ACCESS) & 0xffff; +} + +static int +ramips_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val) +{ + struct raeth_priv *re = bus->priv; + int err; + u32 t; + + RADEBUG("%s: addr=%04x, reg=%04x, value=%04x\n", __func__, + phy_addr, phy_reg, ramips_fe_rr(RAMIPS_MDIO_ACCESS) & 0xffff); + + err = ramips_mdio_wait_ready(re); + if (err) + return err; + + t = (1 << 30) | (phy_addr << 24) | (phy_reg << 16) | val; + ramips_fe_wr(t, RAMIPS_MDIO_ACCESS); + t |= (1 << 31); + ramips_fe_wr(t, RAMIPS_MDIO_ACCESS); + + return ramips_mdio_wait_ready(re); +} + +static int +ramips_mdio_reset(struct mii_bus *bus) +{ + /* TODO */ + return 0; +} + +static int +ramips_mdio_init(struct raeth_priv *re) +{ + int err; + int i; + + re->mii_bus = mdiobus_alloc(); + if (re->mii_bus == NULL) + return -ENOMEM; + + re->mii_bus->name = "ramips_mdio"; + re->mii_bus->read = ramips_mdio_read; + re->mii_bus->write = ramips_mdio_write; + re->mii_bus->reset = ramips_mdio_reset; + re->mii_bus->irq = re->mii_irq; + re->mii_bus->priv = re; + re->mii_bus->parent = re->parent; + + snprintf(re->mii_bus->id, MII_BUS_ID_SIZE, "%s", "ramips_mdio"); + re->mii_bus->phy_mask = 0; + + for (i = 0; i < PHY_MAX_ADDR; i++) + re->mii_irq[i] = PHY_POLL; + + err = mdiobus_register(re->mii_bus); + if (err) + goto err_free_bus; + + return 0; + +err_free_bus: + kfree(re->mii_bus); + return err; +} + +static void +ramips_mdio_cleanup(struct raeth_priv *re) +{ + mdiobus_unregister(re->mii_bus); + kfree(re->mii_bus); +} + +static void +ramips_phy_link_adjust(struct net_device *dev) +{ + struct raeth_priv *re = netdev_priv(dev); + struct phy_device *phydev = re->phy_dev; + unsigned long flags; + int status_change = 0; + + spin_lock_irqsave(&re->phy_lock, flags); + + if (phydev->link) + if (re->duplex != phydev->duplex || + re->speed != phydev->speed) + status_change = 1; + + if (phydev->link != re->link) + status_change = 1; + + re->link = phydev->link; + re->duplex = phydev->duplex; + re->speed = phydev->speed; + + if (status_change) + ramips_link_adjust(re); + + spin_unlock_irqrestore(&re->phy_lock, flags); +} + +static int +ramips_phy_connect_multi(struct raeth_priv *re) +{ + struct net_device *netdev = re->netdev; + struct ramips_eth_platform_data *pdata; + struct phy_device *phydev = NULL; + int phy_addr; + int ret = 0; + + pdata = re->parent->platform_data; + for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { + if (!(pdata->phy_mask & (1 << phy_addr))) + continue; + + if (re->mii_bus->phy_map[phy_addr] == NULL) + continue; + + RADEBUG("%s: PHY found at %s, uid=%08x\n", + netdev->name, + dev_name(&re->mii_bus->phy_map[phy_addr]->dev), + re->mii_bus->phy_map[phy_addr]->phy_id); + + if (phydev == NULL) + phydev = re->mii_bus->phy_map[phy_addr]; + } + + if (!phydev) { + netdev_err(netdev, "no PHY found with phy_mask=%08x\n", + pdata->phy_mask); + return -ENODEV; + } + + re->phy_dev = phy_connect(netdev, dev_name(&phydev->dev), + ramips_phy_link_adjust, 0, + pdata->phy_if_mode); + + if (IS_ERR(re->phy_dev)) { + netdev_err(netdev, "could not connect to PHY at %s\n", + dev_name(&phydev->dev)); + return PTR_ERR(re->phy_dev); + } + + phydev->supported &= PHY_GBIT_FEATURES; + phydev->advertising = phydev->supported; + + RADEBUG("%s: connected to PHY at %s [uid=%08x, driver=%s]\n", + netdev->name, dev_name(&phydev->dev), + phydev->phy_id, phydev->drv->name); + + re->link = 0; + re->speed = 0; + re->duplex = -1; + re->rx_fc = 0; + re->tx_fc = 0; + + return ret; +} + +static int +ramips_phy_connect_fixed(struct raeth_priv *re) +{ + struct ramips_eth_platform_data *pdata; + + pdata = re->parent->platform_data; + switch (pdata->speed) { + case SPEED_10: + case SPEED_100: + case SPEED_1000: + break; + default: + netdev_err(re->netdev, "invalid speed specified\n"); + return -EINVAL; + } + + RADEBUG("%s: using fixed link parameters\n", re->netdev->name); + + re->speed = pdata->speed; + re->duplex = pdata->duplex; + re->tx_fc = pdata->tx_fc; + re->rx_fc = pdata->tx_fc; + + return 0; +} + +static int +ramips_phy_connect(struct raeth_priv *re) +{ + struct ramips_eth_platform_data *pdata; + + pdata = re->parent->platform_data; + if (pdata->phy_mask) + return ramips_phy_connect_multi(re); + + return ramips_phy_connect_fixed(re); +} + +static void +ramips_phy_disconnect(struct raeth_priv *re) +{ + if (re->phy_dev) + phy_disconnect(re->phy_dev); +} + +static void +ramips_phy_start(struct raeth_priv *re) +{ + unsigned long flags; + + if (re->phy_dev) { + phy_start(re->phy_dev); + } else { + spin_lock_irqsave(&re->phy_lock, flags); + re->link = 1; + ramips_link_adjust(re); + spin_unlock_irqrestore(&re->phy_lock, flags); + } +} + +static void +ramips_phy_stop(struct raeth_priv *re) +{ + unsigned long flags; + + if (re->phy_dev) + phy_stop(re->phy_dev); + + spin_lock_irqsave(&re->phy_lock, flags); + re->link = 0; + ramips_link_adjust(re); + spin_unlock_irqrestore(&re->phy_lock, flags); +} +#else +static inline int +ramips_mdio_init(struct raeth_priv *re) +{ + return 0; +} + +static inline void +ramips_mdio_cleanup(struct raeth_priv *re) +{ +} + +static inline int +ramips_phy_connect(struct raeth_priv *re) +{ + return 0; +} + +static inline void +ramips_phy_disconnect(struct raeth_priv *re) +{ +} + +static inline void +ramips_phy_start(struct raeth_priv *re) +{ +} + +static inline void +ramips_phy_stop(struct raeth_priv *re) +{ +} +#endif /* CONFIG_RALINK_RT288X || CONFIG_RALINK_RT3883 */ + +static void +ramips_ring_free(struct raeth_priv *re) +{ + int len; + int i; + + if (re->rx_info) { + for (i = 0; i < NUM_RX_DESC; i++) { + struct raeth_rx_info *rxi; + + rxi = &re->rx_info[i]; + if (rxi->rx_skb) + dev_kfree_skb_any(rxi->rx_skb); + } + kfree(re->rx_info); + } + + if (re->rx) { + len = NUM_RX_DESC * sizeof(struct ramips_rx_dma); + dma_free_coherent(&re->netdev->dev, len, re->rx, + re->rx_desc_dma); + } + + if (re->tx) { + len = NUM_TX_DESC * sizeof(struct ramips_tx_dma); + dma_free_coherent(&re->netdev->dev, len, re->tx, + re->tx_desc_dma); + } + + kfree(re->tx_info); +} + +static int +ramips_ring_alloc(struct raeth_priv *re) +{ + int len; + int err = -ENOMEM; + int i; + + re->tx_info = kzalloc(NUM_TX_DESC * sizeof(struct raeth_tx_info), + GFP_ATOMIC); + if (!re->tx_info) + goto err_cleanup; + + re->rx_info = kzalloc(NUM_RX_DESC * sizeof(struct raeth_rx_info), + GFP_ATOMIC); + if (!re->rx_info) + goto err_cleanup; + + /* allocate tx ring */ + len = NUM_TX_DESC * sizeof(struct ramips_tx_dma); + re->tx = dma_alloc_coherent(&re->netdev->dev, len, + &re->tx_desc_dma, GFP_ATOMIC); + if (!re->tx) + goto err_cleanup; + + /* allocate rx ring */ + len = NUM_RX_DESC * sizeof(struct ramips_rx_dma); + re->rx = dma_alloc_coherent(&re->netdev->dev, len, + &re->rx_desc_dma, GFP_ATOMIC); + if (!re->rx) + goto err_cleanup; + + for (i = 0; i < NUM_RX_DESC; i++) { + struct sk_buff *skb; + + skb = ramips_alloc_skb(re); + if (!skb) + goto err_cleanup; + + re->rx_info[i].rx_skb = skb; + } + + return 0; + +err_cleanup: + ramips_ring_free(re); + return err; +} + +static void +ramips_setup_dma(struct raeth_priv *re) +{ + ramips_fe_twr(re->tx_desc_dma, RAETH_REG_TX_BASE_PTR0); + ramips_fe_twr(NUM_TX_DESC, RAETH_REG_TX_MAX_CNT0); + ramips_fe_twr(0, RAETH_REG_TX_CTX_IDX0); + ramips_fe_twr(RAMIPS_PST_DTX_IDX0, RAETH_REG_PDMA_RST_CFG); + + ramips_fe_twr(re->rx_desc_dma, RAETH_REG_RX_BASE_PTR0); + ramips_fe_twr(NUM_RX_DESC, RAETH_REG_RX_MAX_CNT0); + ramips_fe_twr((NUM_RX_DESC - 1), RAETH_REG_RX_CALC_IDX0); + ramips_fe_twr(RAMIPS_PST_DRX_IDX0, RAETH_REG_PDMA_RST_CFG); +} + +static int +ramips_eth_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct raeth_priv *re = netdev_priv(dev); + struct raeth_tx_info *txi, *txi_next; + struct ramips_tx_dma *txd, *txd_next; + unsigned long tx; + unsigned int tx_next; + dma_addr_t mapped_addr; + + if (re->plat->min_pkt_len) { + if (skb->len < re->plat->min_pkt_len) { + if (skb_padto(skb, re->plat->min_pkt_len)) { + printk(KERN_ERR + "ramips_eth: skb_padto failed\n"); + kfree_skb(skb); + return 0; + } + skb_put(skb, re->plat->min_pkt_len - skb->len); + } + } + + dev->trans_start = jiffies; + mapped_addr = dma_map_single(&re->netdev->dev, skb->data, skb->len, + DMA_TO_DEVICE); + + spin_lock(&re->page_lock); + tx = ramips_fe_trr(RAETH_REG_TX_CTX_IDX0); + tx_next = (tx + 1) % NUM_TX_DESC; + + txi = &re->tx_info[tx]; + txd = txi->tx_desc; + txi_next = &re->tx_info[tx_next]; + txd_next = txi_next->tx_desc; + + if ((txi->tx_skb) || (txi_next->tx_skb) || + !(txd->txd2 & TX_DMA_DONE) || + !(txd_next->txd2 & TX_DMA_DONE)) + goto out; + + txi->tx_skb = skb; + + txd->txd1 = (unsigned int) mapped_addr; + wmb(); + txd->txd2 = TX_DMA_LSO | TX_DMA_PLEN0(skb->len); + dev->stats.tx_packets++; + dev->stats.tx_bytes += skb->len; + ramips_fe_twr(tx_next, RAETH_REG_TX_CTX_IDX0); + netdev_sent_queue(dev, skb->len); + spin_unlock(&re->page_lock); + return NETDEV_TX_OK; + + out: + spin_unlock(&re->page_lock); + dev->stats.tx_dropped++; + kfree_skb(skb); + return NETDEV_TX_OK; +} + +static void +ramips_eth_rx_hw(unsigned long ptr) +{ + struct net_device *dev = (struct net_device *) ptr; + struct raeth_priv *re = netdev_priv(dev); + int rx; + int max_rx = 16; + + rx = ramips_fe_trr(RAETH_REG_RX_CALC_IDX0); + + while (max_rx) { + struct raeth_rx_info *rxi; + struct ramips_rx_dma *rxd; + struct sk_buff *rx_skb, *new_skb; + int pktlen; + + rx = (rx + 1) % NUM_RX_DESC; + + rxi = &re->rx_info[rx]; + rxd = rxi->rx_desc; + if (!(rxd->rxd2 & RX_DMA_DONE)) + break; + + rx_skb = rxi->rx_skb; + pktlen = RX_DMA_PLEN0(rxd->rxd2); + + new_skb = ramips_alloc_skb(re); + /* Reuse the buffer on allocation failures */ + if (new_skb) { + dma_addr_t dma_addr; + + dma_unmap_single(&re->netdev->dev, rxi->rx_dma, + MAX_RX_LENGTH, DMA_FROM_DEVICE); + + skb_put(rx_skb, pktlen); + rx_skb->dev = dev; + rx_skb->protocol = eth_type_trans(rx_skb, dev); + rx_skb->ip_summed = CHECKSUM_NONE; + dev->stats.rx_packets++; + dev->stats.rx_bytes += pktlen; + netif_rx(rx_skb); + + rxi->rx_skb = new_skb; + + dma_addr = dma_map_single(&re->netdev->dev, + new_skb->data, + MAX_RX_LENGTH, + DMA_FROM_DEVICE); + rxi->rx_dma = dma_addr; + rxd->rxd1 = (unsigned int) dma_addr; + wmb(); + } else { + dev->stats.rx_dropped++; + } + + rxd->rxd2 = RX_DMA_LSO; + ramips_fe_twr(rx, RAETH_REG_RX_CALC_IDX0); + max_rx--; + } + + if (max_rx == 0) + tasklet_schedule(&re->rx_tasklet); + else + ramips_fe_int_enable(RX_DLY_INT); +} + +static void +ramips_eth_tx_housekeeping(unsigned long ptr) +{ + struct net_device *dev = (struct net_device*)ptr; + struct raeth_priv *re = netdev_priv(dev); + unsigned int bytes_compl = 0, pkts_compl = 0; + + spin_lock(&re->page_lock); + while (1) { + struct raeth_tx_info *txi; + struct ramips_tx_dma *txd; + + txi = &re->tx_info[re->skb_free_idx]; + txd = txi->tx_desc; + + if (!(txd->txd2 & TX_DMA_DONE) || !(txi->tx_skb)) + break; + + pkts_compl++; + bytes_compl += txi->tx_skb->len; + + dev_kfree_skb_irq(txi->tx_skb); + txi->tx_skb = NULL; + re->skb_free_idx++; + if (re->skb_free_idx >= NUM_TX_DESC) + re->skb_free_idx = 0; + } + netdev_completed_queue(dev, pkts_compl, bytes_compl); + spin_unlock(&re->page_lock); + + ramips_fe_int_enable(TX_DLY_INT); +} + +static void +ramips_eth_timeout(struct net_device *dev) +{ + struct raeth_priv *re = netdev_priv(dev); + + tasklet_schedule(&re->tx_housekeeping_tasklet); +} + +static irqreturn_t +ramips_eth_irq(int irq, void *dev) +{ + struct raeth_priv *re = netdev_priv(dev); + unsigned int status; + + status = ramips_fe_trr(RAETH_REG_FE_INT_STATUS); + status &= ramips_fe_trr(RAETH_REG_FE_INT_ENABLE); + + if (!status) + return IRQ_NONE; + + ramips_fe_twr(status, RAETH_REG_FE_INT_STATUS); + + if (status & RX_DLY_INT) { + ramips_fe_int_disable(RX_DLY_INT); + tasklet_schedule(&re->rx_tasklet); + } + + if (status & TX_DLY_INT) { + ramips_fe_int_disable(TX_DLY_INT); + tasklet_schedule(&re->tx_housekeeping_tasklet); + } + + raeth_debugfs_update_int_stats(re, status); + + return IRQ_HANDLED; +} + +static int +ramips_eth_hw_init(struct net_device *dev) +{ + struct raeth_priv *re = netdev_priv(dev); + int err; + + err = request_irq(dev->irq, ramips_eth_irq, IRQF_DISABLED, + dev->name, dev); + if (err) + return err; + + err = ramips_ring_alloc(re); + if (err) + goto err_free_irq; + + ramips_ring_setup(re); + ramips_hw_set_macaddr(dev->dev_addr); + + ramips_setup_dma(re); + ramips_fe_wr((ramips_fe_rr(RAMIPS_FE_GLO_CFG) & + ~(RAMIPS_US_CYC_CNT_MASK << RAMIPS_US_CYC_CNT_SHIFT)) | + ((re->plat->sys_freq / RAMIPS_US_CYC_CNT_DIVISOR) << RAMIPS_US_CYC_CNT_SHIFT), + RAMIPS_FE_GLO_CFG); + + tasklet_init(&re->tx_housekeeping_tasklet, ramips_eth_tx_housekeeping, + (unsigned long)dev); + tasklet_init(&re->rx_tasklet, ramips_eth_rx_hw, (unsigned long)dev); + + + ramips_fe_twr(RAMIPS_DELAY_INIT, RAETH_REG_DLY_INT_CFG); + ramips_fe_twr(TX_DLY_INT | RX_DLY_INT, RAETH_REG_FE_INT_ENABLE); + if (soc_is_rt5350()) { + ramips_fe_wr(ramips_fe_rr(RT5350_SDM_CFG) & + ~(RT5350_SDM_ICS_EN | RT5350_SDM_TCS_EN | RT5350_SDM_UCS_EN | 0xffff), + RT5350_SDM_CFG); + } else { + ramips_fe_wr(ramips_fe_rr(RAMIPS_GDMA1_FWD_CFG) & + ~(RAMIPS_GDM1_ICS_EN | RAMIPS_GDM1_TCS_EN | RAMIPS_GDM1_UCS_EN | 0xffff), + RAMIPS_GDMA1_FWD_CFG); + ramips_fe_wr(ramips_fe_rr(RAMIPS_CDMA_CSG_CFG) & + ~(RAMIPS_ICS_GEN_EN | RAMIPS_TCS_GEN_EN | RAMIPS_UCS_GEN_EN), + RAMIPS_CDMA_CSG_CFG); + ramips_fe_wr(RAMIPS_PSE_FQFC_CFG_INIT, RAMIPS_PSE_FQ_CFG); + } + ramips_fe_wr(1, RAMIPS_FE_RST_GL); + ramips_fe_wr(0, RAMIPS_FE_RST_GL); + + return 0; + +err_free_irq: + free_irq(dev->irq, dev); + return err; +} + +static int +ramips_eth_open(struct net_device *dev) +{ + struct raeth_priv *re = netdev_priv(dev); + + ramips_fe_twr((ramips_fe_trr(RAETH_REG_PDMA_GLO_CFG) & 0xff) | + (RAMIPS_TX_WB_DDONE | RAMIPS_RX_DMA_EN | + RAMIPS_TX_DMA_EN | RAMIPS_PDMA_SIZE_4DWORDS), + RAETH_REG_PDMA_GLO_CFG); + ramips_phy_start(re); + netif_start_queue(dev); + return 0; +} + +static int +ramips_eth_stop(struct net_device *dev) +{ + struct raeth_priv *re = netdev_priv(dev); + + ramips_fe_twr(ramips_fe_trr(RAETH_REG_PDMA_GLO_CFG) & + ~(RAMIPS_TX_WB_DDONE | RAMIPS_RX_DMA_EN | RAMIPS_TX_DMA_EN), + RAETH_REG_PDMA_GLO_CFG); + + netif_stop_queue(dev); + ramips_phy_stop(re); + RADEBUG("ramips_eth: stopped\n"); + return 0; +} + +static int __init +ramips_eth_probe(struct net_device *dev) +{ + struct raeth_priv *re = netdev_priv(dev); + int err; + + BUG_ON(!re->plat->reset_fe); + re->plat->reset_fe(); + net_srandom(jiffies); + memcpy(dev->dev_addr, re->plat->mac, ETH_ALEN); + + ether_setup(dev); + dev->mtu = 1500; + dev->watchdog_timeo = TX_TIMEOUT; + spin_lock_init(&re->page_lock); + spin_lock_init(&re->phy_lock); + + err = ramips_mdio_init(re); + if (err) + return err; + + err = ramips_phy_connect(re); + if (err) + goto err_mdio_cleanup; + + err = raeth_debugfs_init(re); + if (err) + goto err_phy_disconnect; + + err = ramips_eth_hw_init(dev); + if (err) + goto err_debugfs; + + return 0; + +err_debugfs: + raeth_debugfs_exit(re); +err_phy_disconnect: + ramips_phy_disconnect(re); +err_mdio_cleanup: + ramips_mdio_cleanup(re); + return err; +} + +static void +ramips_eth_uninit(struct net_device *dev) +{ + struct raeth_priv *re = netdev_priv(dev); + + raeth_debugfs_exit(re); + ramips_phy_disconnect(re); + ramips_mdio_cleanup(re); + ramips_fe_twr(0, RAETH_REG_FE_INT_ENABLE); + free_irq(dev->irq, dev); + tasklet_kill(&re->tx_housekeeping_tasklet); + tasklet_kill(&re->rx_tasklet); + ramips_ring_cleanup(re); + ramips_ring_free(re); +} + +static const struct net_device_ops ramips_eth_netdev_ops = { + .ndo_init = ramips_eth_probe, + .ndo_uninit = ramips_eth_uninit, + .ndo_open = ramips_eth_open, + .ndo_stop = ramips_eth_stop, + .ndo_start_xmit = ramips_eth_hard_start_xmit, + .ndo_tx_timeout = ramips_eth_timeout, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + +static int +ramips_eth_plat_probe(struct platform_device *plat) +{ + struct raeth_priv *re; + struct ramips_eth_platform_data *data = plat->dev.platform_data; + struct resource *res; + int err; + + if (!data) { + dev_err(&plat->dev, "no platform data specified\n"); + return -EINVAL; + } + + res = platform_get_resource(plat, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&plat->dev, "no memory resource found\n"); + return -ENXIO; + } + + ramips_fe_base = ioremap_nocache(res->start, res->end - res->start + 1); + if (!ramips_fe_base) + return -ENOMEM; + + ramips_dev = alloc_etherdev(sizeof(struct raeth_priv)); + if (!ramips_dev) { + dev_err(&plat->dev, "alloc_etherdev failed\n"); + err = -ENOMEM; + goto err_unmap; + } + + strcpy(ramips_dev->name, "eth%d"); + ramips_dev->irq = platform_get_irq(plat, 0); + if (ramips_dev->irq < 0) { + dev_err(&plat->dev, "no IRQ resource found\n"); + err = -ENXIO; + goto err_free_dev; + } + ramips_dev->addr_len = ETH_ALEN; + ramips_dev->base_addr = (unsigned long)ramips_fe_base; + ramips_dev->netdev_ops = &ramips_eth_netdev_ops; + + re = netdev_priv(ramips_dev); + + re->netdev = ramips_dev; + re->parent = &plat->dev; + re->speed = data->speed; + re->duplex = data->duplex; + re->rx_fc = data->rx_fc; + re->tx_fc = data->tx_fc; + re->plat = data; + + err = register_netdev(ramips_dev); + if (err) { + dev_err(&plat->dev, "error bringing up device\n"); + goto err_free_dev; + } + + RADEBUG("ramips_eth: loaded\n"); + return 0; + + err_free_dev: + kfree(ramips_dev); + err_unmap: + iounmap(ramips_fe_base); + return err; +} + +static int +ramips_eth_plat_remove(struct platform_device *plat) +{ + unregister_netdev(ramips_dev); + free_netdev(ramips_dev); + RADEBUG("ramips_eth: unloaded\n"); + return 0; +} + +static struct platform_driver ramips_eth_driver = { + .probe = ramips_eth_plat_probe, + .remove = ramips_eth_plat_remove, + .driver = { + .name = "ramips_eth", + .owner = THIS_MODULE, + }, +}; + +static int __init +ramips_eth_init(void) +{ + int ret; + + ret = raeth_debugfs_root_init(); + if (ret) + goto err_out; + + ret = rt305x_esw_init(); + if (ret) + goto err_debugfs_exit; + + ret = platform_driver_register(&ramips_eth_driver); + if (ret) { + printk(KERN_ERR + "ramips_eth: Error registering platfom driver!\n"); + goto esw_cleanup; + } + + return 0; + +esw_cleanup: + rt305x_esw_exit(); +err_debugfs_exit: + raeth_debugfs_root_exit(); +err_out: + return ret; +} + +static void __exit +ramips_eth_cleanup(void) +{ + platform_driver_unregister(&ramips_eth_driver); + rt305x_esw_exit(); + raeth_debugfs_root_exit(); +} + +module_init(ramips_eth_init); +module_exit(ramips_eth_cleanup); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("John Crispin <blogic@openwrt.org>"); +MODULE_DESCRIPTION("ethernet driver for ramips boards"); diff --git a/target/linux/ramips/files-3.7/drivers/spi/spi-ramips.c b/target/linux/ramips/files-3.7/drivers/spi/spi-ramips.c new file mode 100644 index 0000000000..d2ceaf3b8d --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/spi/spi-ramips.c @@ -0,0 +1,559 @@ +/* + * ramips_spi.c -- Ralink RT288x/RT305x SPI controller driver + * + * Copyright (C) 2011 Sergiy <piratfm@gmail.com> + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/spi/spi.h> + +#define DRIVER_NAME "ramips-spi" +#define RALINK_NUM_CHIPSELECTS 1 /* only one slave is supported*/ +#define RALINK_SPI_WAIT_RDY_MAX_LOOP 2000 /* in usec */ + +#define RAMIPS_SPI_STAT 0x00 +#define RAMIPS_SPI_CFG 0x10 +#define RAMIPS_SPI_CTL 0x14 +#define RAMIPS_SPI_DATA 0x20 + +/* SPISTAT register bit field */ +#define SPISTAT_BUSY BIT(0) + +/* SPICFG register bit field */ +#define SPICFG_LSBFIRST 0 +#define SPICFG_MSBFIRST BIT(8) +#define SPICFG_SPICLKPOL BIT(6) +#define SPICFG_RXCLKEDGE_FALLING BIT(5) +#define SPICFG_TXCLKEDGE_FALLING BIT(4) +#define SPICFG_SPICLK_PRESCALE_MASK 0x7 +#define SPICFG_SPICLK_DIV2 0 +#define SPICFG_SPICLK_DIV4 1 +#define SPICFG_SPICLK_DIV8 2 +#define SPICFG_SPICLK_DIV16 3 +#define SPICFG_SPICLK_DIV32 4 +#define SPICFG_SPICLK_DIV64 5 +#define SPICFG_SPICLK_DIV128 6 +#define SPICFG_SPICLK_DISABLE 7 + +/* SPICTL register bit field */ +#define SPICTL_HIZSDO BIT(3) +#define SPICTL_STARTWR BIT(2) +#define SPICTL_STARTRD BIT(1) +#define SPICTL_SPIENA BIT(0) + +#ifdef DEBUG +#define spi_debug(args...) printk(args) +#else +#define spi_debug(args...) +#endif + +struct ramips_spi { + struct work_struct work; + + /* Lock access to transfer list.*/ + spinlock_t lock; + + struct list_head msg_queue; + struct spi_master *master; + void __iomem *base; + unsigned int sys_freq; + unsigned int speed; + + struct clk *clk; +}; + +static struct workqueue_struct *ramips_spi_wq; + +static inline struct ramips_spi *ramips_spidev_to_rs(struct spi_device *spi) +{ + return spi_master_get_devdata(spi->master); +} + +static inline u32 ramips_spi_read(struct ramips_spi *rs, u32 reg) +{ + return ioread32(rs->base + reg); +} + +static inline void ramips_spi_write(struct ramips_spi *rs, u32 reg, u32 val) +{ + iowrite32(val, rs->base + reg); +} + +static inline void ramips_spi_setbits(struct ramips_spi *rs, u32 reg, u32 mask) +{ + void __iomem *addr = rs->base + reg; + u32 val; + + val = ioread32(addr); + val |= mask; + iowrite32(val, addr); +} + +static inline void ramips_spi_clrbits(struct ramips_spi *rs, u32 reg, u32 mask) +{ + void __iomem *addr = rs->base + reg; + u32 val; + + val = ioread32(addr); + val &= ~mask; + iowrite32(val, addr); +} + +static int ramips_spi_baudrate_set(struct spi_device *spi, unsigned int speed) +{ + struct ramips_spi *rs = ramips_spidev_to_rs(spi); + u32 rate; + u32 prescale; + u32 reg; + + spi_debug("%s: speed:%u\n", __func__, speed); + + /* + * the supported rates are: 2,4,8...128 + * round up as we look for equal or less speed + */ + rate = DIV_ROUND_UP(rs->sys_freq, speed); + spi_debug("%s: rate-1:%u\n", __func__, rate); + rate = roundup_pow_of_two(rate); + spi_debug("%s: rate-2:%u\n", __func__, rate); + + /* check if requested speed is too small */ + if (rate > 128) + return -EINVAL; + + if (rate < 2) + rate = 2; + + /* Convert the rate to SPI clock divisor value. */ + prescale = ilog2(rate/2); + spi_debug("%s: prescale:%u\n", __func__, prescale); + + reg = ramips_spi_read(rs, RAMIPS_SPI_CFG); + reg = ((reg & ~SPICFG_SPICLK_PRESCALE_MASK) | prescale); + ramips_spi_write(rs, RAMIPS_SPI_CFG, reg); + rs->speed = speed; + return 0; +} + +/* + * called only when no transfer is active on the bus + */ +static int +ramips_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) +{ + struct ramips_spi *rs = ramips_spidev_to_rs(spi); + unsigned int speed = spi->max_speed_hz; + int rc; + unsigned int bits_per_word = 8; + + if ((t != NULL) && t->speed_hz) + speed = t->speed_hz; + + if ((t != NULL) && t->bits_per_word) + bits_per_word = t->bits_per_word; + + if (rs->speed != speed) { + spi_debug("%s: speed_hz:%u\n", __func__, speed); + rc = ramips_spi_baudrate_set(spi, speed); + if (rc) + return rc; + } + + if (bits_per_word != 8) { + spi_debug("%s: bad bits_per_word: %u\n", __func__, + bits_per_word); + return -EINVAL; + } + + return 0; +} + +static void ramips_spi_set_cs(struct ramips_spi *rs, int enable) +{ + if (enable) + ramips_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA); + else + ramips_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA); +} + +static inline int ramips_spi_wait_till_ready(struct ramips_spi *rs) +{ + int i; + + for (i = 0; i < RALINK_SPI_WAIT_RDY_MAX_LOOP; i++) { + u32 status; + + status = ramips_spi_read(rs, RAMIPS_SPI_STAT); + if ((status & SPISTAT_BUSY) == 0) + return 0; + + udelay(1); + } + + return -ETIMEDOUT; +} + +static unsigned int +ramips_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer) +{ + struct ramips_spi *rs = ramips_spidev_to_rs(spi); + unsigned count = 0; + u8 *rx = xfer->rx_buf; + const u8 *tx = xfer->tx_buf; + int err; + + spi_debug("%s(%d): %s %s\n", __func__, xfer->len, + (tx != NULL) ? "tx" : " ", + (rx != NULL) ? "rx" : " "); + + if (tx) { + for (count = 0; count < xfer->len; count++) { + ramips_spi_write(rs, RAMIPS_SPI_DATA, tx[count]); + ramips_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR); + err = ramips_spi_wait_till_ready(rs); + if (err) { + dev_err(&spi->dev, "TX failed, err=%d\n", err); + goto out; + } + } + } + + if (rx) { + for (count = 0; count < xfer->len; count++) { + ramips_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD); + err = ramips_spi_wait_till_ready(rs); + if (err) { + dev_err(&spi->dev, "RX failed, err=%d\n", err); + goto out; + } + rx[count] = (u8) ramips_spi_read(rs, RAMIPS_SPI_DATA); + } + } + +out: + return count; +} + +static void ramips_spi_work(struct work_struct *work) +{ + struct ramips_spi *rs = + container_of(work, struct ramips_spi, work); + + spin_lock_irq(&rs->lock); + while (!list_empty(&rs->msg_queue)) { + struct spi_message *m; + struct spi_device *spi; + struct spi_transfer *t = NULL; + int par_override = 0; + int status = 0; + int cs_active = 0; + + m = container_of(rs->msg_queue.next, struct spi_message, + queue); + + list_del_init(&m->queue); + spin_unlock_irq(&rs->lock); + + spi = m->spi; + + /* Load defaults */ + status = ramips_spi_setup_transfer(spi, NULL); + + if (status < 0) + goto msg_done; + + list_for_each_entry(t, &m->transfers, transfer_list) { + if (par_override || t->speed_hz || t->bits_per_word) { + par_override = 1; + status = ramips_spi_setup_transfer(spi, t); + if (status < 0) + break; + if (!t->speed_hz && !t->bits_per_word) + par_override = 0; + } + + if (!cs_active) { + ramips_spi_set_cs(rs, 1); + cs_active = 1; + } + + if (t->len) + m->actual_length += + ramips_spi_write_read(spi, t); + + if (t->delay_usecs) + udelay(t->delay_usecs); + + if (t->cs_change) { + ramips_spi_set_cs(rs, 0); + cs_active = 0; + } + } + +msg_done: + if (cs_active) + ramips_spi_set_cs(rs, 0); + + m->status = status; + m->complete(m->context); + + spin_lock_irq(&rs->lock); + } + + spin_unlock_irq(&rs->lock); +} + +static int ramips_spi_setup(struct spi_device *spi) +{ + struct ramips_spi *rs = ramips_spidev_to_rs(spi); + + if ((spi->max_speed_hz == 0) || + (spi->max_speed_hz > (rs->sys_freq / 2))) + spi->max_speed_hz = (rs->sys_freq / 2); + + if (spi->max_speed_hz < (rs->sys_freq/128)) { + dev_err(&spi->dev, "setup: requested speed too low %d Hz\n", + spi->max_speed_hz); + return -EINVAL; + } + + if (spi->bits_per_word != 0 && spi->bits_per_word != 8) { + dev_err(&spi->dev, + "setup: requested bits per words - os wrong %d bpw\n", + spi->bits_per_word); + return -EINVAL; + } + + if (spi->bits_per_word == 0) + spi->bits_per_word = 8; + + /* + * baudrate & width will be set ramips_spi_setup_transfer + */ + return 0; +} + +static int ramips_spi_transfer(struct spi_device *spi, struct spi_message *m) +{ + struct ramips_spi *rs; + struct spi_transfer *t = NULL; + unsigned long flags; + + m->actual_length = 0; + m->status = 0; + + /* reject invalid messages and transfers */ + if (list_empty(&m->transfers) || !m->complete) + return -EINVAL; + + rs = ramips_spidev_to_rs(spi); + + list_for_each_entry(t, &m->transfers, transfer_list) { + unsigned int bits_per_word = spi->bits_per_word; + + if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) { + dev_err(&spi->dev, + "message rejected : " + "invalid transfer data buffers\n"); + goto msg_rejected; + } + + if (t->bits_per_word) + bits_per_word = t->bits_per_word; + + if (bits_per_word != 8) { + dev_err(&spi->dev, + "message rejected : " + "invalid transfer bits_per_word (%d bits)\n", + bits_per_word); + goto msg_rejected; + } + + if (t->speed_hz && t->speed_hz < (rs->sys_freq/128)) { + dev_err(&spi->dev, + "message rejected : " + "device min speed (%d Hz) exceeds " + "required transfer speed (%d Hz)\n", + (rs->sys_freq/128), t->speed_hz); + goto msg_rejected; + } + } + + + spin_lock_irqsave(&rs->lock, flags); + list_add_tail(&m->queue, &rs->msg_queue); + queue_work(ramips_spi_wq, &rs->work); + spin_unlock_irqrestore(&rs->lock, flags); + + return 0; +msg_rejected: + /* Message rejected and not queued */ + m->status = -EINVAL; + if (m->complete) + m->complete(m->context); + return -EINVAL; +} + +static void __init ramips_spi_reset(struct ramips_spi *rs) +{ + ramips_spi_write(rs, RAMIPS_SPI_CFG, + SPICFG_MSBFIRST | SPICFG_TXCLKEDGE_FALLING | + SPICFG_SPICLK_DIV16 | SPICFG_SPICLKPOL); + ramips_spi_write(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO | SPICTL_SPIENA); +} + +static int __init ramips_spi_probe(struct platform_device *pdev) +{ + struct spi_master *master; + struct ramips_spi *rs; + struct resource *r; + int status = 0; + + master = spi_alloc_master(&pdev->dev, sizeof(*rs)); + if (master == NULL) { + dev_dbg(&pdev->dev, "master allocation failed\n"); + return -ENOMEM; + } + + if (pdev->id != -1) + master->bus_num = pdev->id; + + /* we support only mode 0, and no options */ + master->mode_bits = 0; + + master->setup = ramips_spi_setup; + master->transfer = ramips_spi_transfer; + master->num_chipselect = RALINK_NUM_CHIPSELECTS; + + dev_set_drvdata(&pdev->dev, master); + + rs = spi_master_get_devdata(master); + rs->master = master; + + rs->clk = clk_get(NULL, "sys"); + if (IS_ERR(rs->clk)) { + status = PTR_ERR(rs->clk); + dev_err(&pdev->dev, "unable to get SYS clock, err=%d\n", + status); + goto out_put_master; + } + + status = clk_enable(rs->clk); + if (status) + goto out_put_clk; + + rs->sys_freq = clk_get_rate(rs->clk); + spi_debug("%s: sys_freq: %ld\n", __func__, rs->sys_freq); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (r == NULL) { + status = -ENODEV; + goto out_disable_clk; + } + + if (!request_mem_region(r->start, (r->end - r->start) + 1, + dev_name(&pdev->dev))) { + status = -EBUSY; + goto out_disable_clk; + } + + rs->base = ioremap(r->start, resource_size(r)); + if (rs->base == NULL) { + dev_err(&pdev->dev, "ioremap failed\n"); + status = -ENOMEM; + goto out_rel_mem; + } + + INIT_WORK(&rs->work, ramips_spi_work); + + spin_lock_init(&rs->lock); + INIT_LIST_HEAD(&rs->msg_queue); + + ramips_spi_reset(rs); + + status = spi_register_master(master); + if (status) + goto out_unmap_base; + + return 0; + +out_unmap_base: + iounmap(rs->base); +out_rel_mem: + release_mem_region(r->start, (r->end - r->start) + 1); +out_disable_clk: + clk_disable(rs->clk); +out_put_clk: + clk_put(rs->clk); +out_put_master: + spi_master_put(master); + return status; +} + +static int ramips_spi_remove(struct platform_device *pdev) +{ + struct spi_master *master; + struct ramips_spi *rs; + struct resource *r; + + master = dev_get_drvdata(&pdev->dev); + rs = spi_master_get_devdata(master); + + cancel_work_sync(&rs->work); + + iounmap(rs->base); + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(r->start, (r->end - r->start) + 1); + + clk_disable(rs->clk); + clk_put(rs->clk); + spi_unregister_master(master); + + return 0; +} + +MODULE_ALIAS("platform:" DRIVER_NAME); + +static struct platform_driver ramips_spi_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, + .remove = ramips_spi_remove, +}; + +static int __init ramips_spi_init(void) +{ + ramips_spi_wq = create_singlethread_workqueue( + ramips_spi_driver.driver.name); + if (ramips_spi_wq == NULL) + return -ENOMEM; + + return platform_driver_probe(&ramips_spi_driver, ramips_spi_probe); +} +module_init(ramips_spi_init); + +static void __exit ramips_spi_exit(void) +{ + flush_workqueue(ramips_spi_wq); + platform_driver_unregister(&ramips_spi_driver); + + destroy_workqueue(ramips_spi_wq); +} +module_exit(ramips_spi_exit); + +MODULE_DESCRIPTION("Ralink SPI driver"); +MODULE_AUTHOR("Sergiy <piratfm@gmail.com>"); +MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); +MODULE_LICENSE("GPL"); diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/Kconfig b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/Kconfig new file mode 100644 index 0000000000..6dd75f14a3 --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/Kconfig @@ -0,0 +1,24 @@ +config DWC_OTG + tristate "Ralink RT305X DWC_OTG support" + depends on SOC_RT305X + ---help--- + This driver supports Ralink DWC_OTG + +choice + prompt "USB Operation Mode" + depends on DWC_OTG + default DWC_OTG_HOST_ONLY + +config DWC_OTG_HOST_ONLY + bool "HOST ONLY MODE" + depends on DWC_OTG + +config DWC_OTG_DEVICE_ONLY + bool "DEVICE ONLY MODE" + depends on DWC_OTG + +endchoice + +config DWC_OTG_DEBUG + bool "Enable debug mode" + depends on DWC_OTG diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/Makefile b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/Makefile new file mode 100644 index 0000000000..95c5b66fea --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/Makefile @@ -0,0 +1,25 @@ +# +# Makefile for DWC_otg Highspeed USB controller driver +# + +ifeq ($(CONFIG_DWC_OTG_DEBUG),y) +EXTRA_CFLAGS += -DDEBUG +endif + +# Use one of the following flags to compile the software in host-only or +# device-only mode. +ifeq ($(CONFIG_DWC_OTG_HOST_ONLY),y) +EXTRA_CFLAGS += -DDWC_HOST_ONLY +EXTRA_CFLAGS += -DDWC_EN_ISOC +endif + +ifeq ($(CONFIG_DWC_OTG_DEVICE_ONLY),y) +EXTRA_CFLAGS += -DDWC_DEVICE_ONLY +endif + +obj-$(CONFIG_DWC_OTG) := dwc_otg.o + +dwc_otg-objs := dwc_otg_driver.o dwc_otg_attr.o +dwc_otg-objs += dwc_otg_cil.o dwc_otg_cil_intr.o +dwc_otg-objs += dwc_otg_pcd.o dwc_otg_pcd_intr.o +dwc_otg-objs += dwc_otg_hcd.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dummy_audio.c b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dummy_audio.c new file mode 100644 index 0000000000..225decf765 --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dummy_audio.c @@ -0,0 +1,1575 @@ +/* + * zero.c -- Gadget Zero, for USB development + * + * Copyright (C) 2003-2004 David Brownell + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + +/* + * Gadget Zero only needs two bulk endpoints, and is an example of how you + * can write a hardware-agnostic gadget driver running inside a USB device. + * + * Hardware details are visible (see CONFIG_USB_ZERO_* below) but don't + * affect most of the driver. + * + * Use it with the Linux host/master side "usbtest" driver to get a basic + * functional test of your device-side usb stack, or with "usb-skeleton". + * + * It supports two similar configurations. One sinks whatever the usb host + * writes, and in return sources zeroes. The other loops whatever the host + * writes back, so the host can read it. Module options include: + * + * buflen=N default N=4096, buffer size used + * qlen=N default N=32, how many buffers in the loopback queue + * loopdefault default false, list loopback config first + * + * Many drivers will only have one configuration, letting them be much + * simpler if they also don't support high speed operation (like this + * driver does). + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/smp_lock.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/uts.h> +#include <linux/version.h> +#include <linux/device.h> +#include <linux/moduleparam.h> +#include <linux/proc_fs.h> + +#include <asm/byteorder.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/unaligned.h> + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21) +# include <linux/usb/ch9.h> +#else +# include <linux/usb_ch9.h> +#endif + +#include <linux/usb_gadget.h> + + +/*-------------------------------------------------------------------------*/ +/*-------------------------------------------------------------------------*/ + + +static int utf8_to_utf16le(const char *s, u16 *cp, unsigned len) +{ + int count = 0; + u8 c; + u16 uchar; + + /* this insists on correct encodings, though not minimal ones. + * BUT it currently rejects legit 4-byte UTF-8 code points, + * which need surrogate pairs. (Unicode 3.1 can use them.) + */ + while (len != 0 && (c = (u8) *s++) != 0) { + if (unlikely(c & 0x80)) { + // 2-byte sequence: + // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx + if ((c & 0xe0) == 0xc0) { + uchar = (c & 0x1f) << 6; + + c = (u8) *s++; + if ((c & 0xc0) != 0xc0) + goto fail; + c &= 0x3f; + uchar |= c; + + // 3-byte sequence (most CJKV characters): + // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx + } else if ((c & 0xf0) == 0xe0) { + uchar = (c & 0x0f) << 12; + + c = (u8) *s++; + if ((c & 0xc0) != 0xc0) + goto fail; + c &= 0x3f; + uchar |= c << 6; + + c = (u8) *s++; + if ((c & 0xc0) != 0xc0) + goto fail; + c &= 0x3f; + uchar |= c; + + /* no bogus surrogates */ + if (0xd800 <= uchar && uchar <= 0xdfff) + goto fail; + + // 4-byte sequence (surrogate pairs, currently rare): + // 11101110wwwwzzzzyy + 110111yyyyxxxxxx + // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx + // (uuuuu = wwww + 1) + // FIXME accept the surrogate code points (only) + + } else + goto fail; + } else + uchar = c; + put_unaligned (cpu_to_le16 (uchar), cp++); + count++; + len--; + } + return count; +fail: + return -1; +} + + +/** + * usb_gadget_get_string - fill out a string descriptor + * @table: of c strings encoded using UTF-8 + * @id: string id, from low byte of wValue in get string descriptor + * @buf: at least 256 bytes + * + * Finds the UTF-8 string matching the ID, and converts it into a + * string descriptor in utf16-le. + * Returns length of descriptor (always even) or negative errno + * + * If your driver needs stings in multiple languages, you'll probably + * "switch (wIndex) { ... }" in your ep0 string descriptor logic, + * using this routine after choosing which set of UTF-8 strings to use. + * Note that US-ASCII is a strict subset of UTF-8; any string bytes with + * the eighth bit set will be multibyte UTF-8 characters, not ISO-8859/1 + * characters (which are also widely used in C strings). + */ +int +usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf) +{ + struct usb_string *s; + int len; + + /* descriptor 0 has the language id */ + if (id == 0) { + buf [0] = 4; + buf [1] = USB_DT_STRING; + buf [2] = (u8) table->language; + buf [3] = (u8) (table->language >> 8); + return 4; + } + for (s = table->strings; s && s->s; s++) + if (s->id == id) + break; + + /* unrecognized: stall. */ + if (!s || !s->s) + return -EINVAL; + + /* string descriptors have length, tag, then UTF16-LE text */ + len = min ((size_t) 126, strlen (s->s)); + memset (buf + 2, 0, 2 * len); /* zero all the bytes */ + len = utf8_to_utf16le(s->s, (u16 *)&buf[2], len); + if (len < 0) + return -EINVAL; + buf [0] = (len + 1) * 2; + buf [1] = USB_DT_STRING; + return buf [0]; +} + + +/*-------------------------------------------------------------------------*/ +/*-------------------------------------------------------------------------*/ + + +/** + * usb_descriptor_fillbuf - fill buffer with descriptors + * @buf: Buffer to be filled + * @buflen: Size of buf + * @src: Array of descriptor pointers, terminated by null pointer. + * + * Copies descriptors into the buffer, returning the length or a + * negative error code if they can't all be copied. Useful when + * assembling descriptors for an associated set of interfaces used + * as part of configuring a composite device; or in other cases where + * sets of descriptors need to be marshaled. + */ +int +usb_descriptor_fillbuf(void *buf, unsigned buflen, + const struct usb_descriptor_header **src) +{ + u8 *dest = buf; + + if (!src) + return -EINVAL; + + /* fill buffer from src[] until null descriptor ptr */ + for (; 0 != *src; src++) { + unsigned len = (*src)->bLength; + + if (len > buflen) + return -EINVAL; + memcpy(dest, *src, len); + buflen -= len; + dest += len; + } + return dest - (u8 *)buf; +} + + +/** + * usb_gadget_config_buf - builts a complete configuration descriptor + * @config: Header for the descriptor, including characteristics such + * as power requirements and number of interfaces. + * @desc: Null-terminated vector of pointers to the descriptors (interface, + * endpoint, etc) defining all functions in this device configuration. + * @buf: Buffer for the resulting configuration descriptor. + * @length: Length of buffer. If this is not big enough to hold the + * entire configuration descriptor, an error code will be returned. + * + * This copies descriptors into the response buffer, building a descriptor + * for that configuration. It returns the buffer length or a negative + * status code. The config.wTotalLength field is set to match the length + * of the result, but other descriptor fields (including power usage and + * interface count) must be set by the caller. + * + * Gadget drivers could use this when constructing a config descriptor + * in response to USB_REQ_GET_DESCRIPTOR. They will need to patch the + * resulting bDescriptorType value if USB_DT_OTHER_SPEED_CONFIG is needed. + */ +int usb_gadget_config_buf( + const struct usb_config_descriptor *config, + void *buf, + unsigned length, + const struct usb_descriptor_header **desc +) +{ + struct usb_config_descriptor *cp = buf; + int len; + + /* config descriptor first */ + if (length < USB_DT_CONFIG_SIZE || !desc) + return -EINVAL; + *cp = *config; + + /* then interface/endpoint/class/vendor/... */ + len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf, + length - USB_DT_CONFIG_SIZE, desc); + if (len < 0) + return len; + len += USB_DT_CONFIG_SIZE; + if (len > 0xffff) + return -EINVAL; + + /* patch up the config descriptor */ + cp->bLength = USB_DT_CONFIG_SIZE; + cp->bDescriptorType = USB_DT_CONFIG; + cp->wTotalLength = cpu_to_le16(len); + cp->bmAttributes |= USB_CONFIG_ATT_ONE; + return len; +} + +/*-------------------------------------------------------------------------*/ +/*-------------------------------------------------------------------------*/ + + +#define RBUF_LEN (1024*1024) +static int rbuf_start; +static int rbuf_len; +static __u8 rbuf[RBUF_LEN]; + +/*-------------------------------------------------------------------------*/ + +#define DRIVER_VERSION "St Patrick's Day 2004" + +static const char shortname [] = "zero"; +static const char longname [] = "YAMAHA YST-MS35D USB Speaker "; + +static const char source_sink [] = "source and sink data"; +static const char loopback [] = "loop input to output"; + +/*-------------------------------------------------------------------------*/ + +/* + * driver assumes self-powered hardware, and + * has no way for users to trigger remote wakeup. + * + * this version autoconfigures as much as possible, + * which is reasonable for most "bulk-only" drivers. + */ +static const char *EP_IN_NAME; /* source */ +static const char *EP_OUT_NAME; /* sink */ + +/*-------------------------------------------------------------------------*/ + +/* big enough to hold our biggest descriptor */ +#define USB_BUFSIZ 512 + +struct zero_dev { + spinlock_t lock; + struct usb_gadget *gadget; + struct usb_request *req; /* for control responses */ + + /* when configured, we have one of two configs: + * - source data (in to host) and sink it (out from host) + * - or loop it back (out from host back in to host) + */ + u8 config; + struct usb_ep *in_ep, *out_ep; + + /* autoresume timer */ + struct timer_list resume; +}; + +#define xprintk(d,level,fmt,args...) \ + dev_printk(level , &(d)->gadget->dev , fmt , ## args) + +#ifdef DEBUG +#define DBG(dev,fmt,args...) \ + xprintk(dev , KERN_DEBUG , fmt , ## args) +#else +#define DBG(dev,fmt,args...) \ + do { } while (0) +#endif /* DEBUG */ + +#ifdef VERBOSE +#define VDBG DBG +#else +#define VDBG(dev,fmt,args...) \ + do { } while (0) +#endif /* VERBOSE */ + +#define ERROR(dev,fmt,args...) \ + xprintk(dev , KERN_ERR , fmt , ## args) +#define WARN(dev,fmt,args...) \ + xprintk(dev , KERN_WARNING , fmt , ## args) +#define INFO(dev,fmt,args...) \ + xprintk(dev , KERN_INFO , fmt , ## args) + +/*-------------------------------------------------------------------------*/ + +static unsigned buflen = 4096; +static unsigned qlen = 32; +static unsigned pattern = 0; + +module_param (buflen, uint, S_IRUGO|S_IWUSR); +module_param (qlen, uint, S_IRUGO|S_IWUSR); +module_param (pattern, uint, S_IRUGO|S_IWUSR); + +/* + * if it's nonzero, autoresume says how many seconds to wait + * before trying to wake up the host after suspend. + */ +static unsigned autoresume = 0; +module_param (autoresume, uint, 0); + +/* + * Normally the "loopback" configuration is second (index 1) so + * it's not the default. Here's where to change that order, to + * work better with hosts where config changes are problematic. + * Or controllers (like superh) that only support one config. + */ +static int loopdefault = 0; + +module_param (loopdefault, bool, S_IRUGO|S_IWUSR); + +/*-------------------------------------------------------------------------*/ + +/* Thanks to NetChip Technologies for donating this product ID. + * + * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! + * Instead: allocate your own, using normal USB-IF procedures. + */ +#ifndef CONFIG_USB_ZERO_HNPTEST +#define DRIVER_VENDOR_NUM 0x0525 /* NetChip */ +#define DRIVER_PRODUCT_NUM 0xa4a0 /* Linux-USB "Gadget Zero" */ +#else +#define DRIVER_VENDOR_NUM 0x1a0a /* OTG test device IDs */ +#define DRIVER_PRODUCT_NUM 0xbadd +#endif + +/*-------------------------------------------------------------------------*/ + +/* + * DESCRIPTORS ... most are static, but strings and (full) + * configuration descriptors are built on demand. + */ + +/* +#define STRING_MANUFACTURER 25 +#define STRING_PRODUCT 42 +#define STRING_SERIAL 101 +*/ +#define STRING_MANUFACTURER 1 +#define STRING_PRODUCT 2 +#define STRING_SERIAL 3 + +#define STRING_SOURCE_SINK 250 +#define STRING_LOOPBACK 251 + +/* + * This device advertises two configurations; these numbers work + * on a pxa250 as well as more flexible hardware. + */ +#define CONFIG_SOURCE_SINK 3 +#define CONFIG_LOOPBACK 2 + +/* +static struct usb_device_descriptor +device_desc = { + .bLength = sizeof device_desc, + .bDescriptorType = USB_DT_DEVICE, + + .bcdUSB = __constant_cpu_to_le16 (0x0200), + .bDeviceClass = USB_CLASS_VENDOR_SPEC, + + .idVendor = __constant_cpu_to_le16 (DRIVER_VENDOR_NUM), + .idProduct = __constant_cpu_to_le16 (DRIVER_PRODUCT_NUM), + .iManufacturer = STRING_MANUFACTURER, + .iProduct = STRING_PRODUCT, + .iSerialNumber = STRING_SERIAL, + .bNumConfigurations = 2, +}; +*/ +static struct usb_device_descriptor +device_desc = { + .bLength = sizeof device_desc, + .bDescriptorType = USB_DT_DEVICE, + .bcdUSB = __constant_cpu_to_le16 (0x0100), + .bDeviceClass = USB_CLASS_PER_INTERFACE, + .bDeviceSubClass = 0, + .bDeviceProtocol = 0, + .bMaxPacketSize0 = 64, + .bcdDevice = __constant_cpu_to_le16 (0x0100), + .idVendor = __constant_cpu_to_le16 (0x0499), + .idProduct = __constant_cpu_to_le16 (0x3002), + .iManufacturer = STRING_MANUFACTURER, + .iProduct = STRING_PRODUCT, + .iSerialNumber = STRING_SERIAL, + .bNumConfigurations = 1, +}; + +static struct usb_config_descriptor +z_config = { + .bLength = sizeof z_config, + .bDescriptorType = USB_DT_CONFIG, + + /* compute wTotalLength on the fly */ + .bNumInterfaces = 2, + .bConfigurationValue = 1, + .iConfiguration = 0, + .bmAttributes = 0x40, + .bMaxPower = 0, /* self-powered */ +}; + + +static struct usb_otg_descriptor +otg_descriptor = { + .bLength = sizeof otg_descriptor, + .bDescriptorType = USB_DT_OTG, + + .bmAttributes = USB_OTG_SRP, +}; + +/* one interface in each configuration */ +#ifdef CONFIG_USB_GADGET_DUALSPEED + +/* + * usb 2.0 devices need to expose both high speed and full speed + * descriptors, unless they only run at full speed. + * + * that means alternate endpoint descriptors (bigger packets) + * and a "device qualifier" ... plus more construction options + * for the config descriptor. + */ + +static struct usb_qualifier_descriptor +dev_qualifier = { + .bLength = sizeof dev_qualifier, + .bDescriptorType = USB_DT_DEVICE_QUALIFIER, + + .bcdUSB = __constant_cpu_to_le16 (0x0200), + .bDeviceClass = USB_CLASS_VENDOR_SPEC, + + .bNumConfigurations = 2, +}; + + +struct usb_cs_as_general_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bDescriptorSubType; + __u8 bTerminalLink; + __u8 bDelay; + __u16 wFormatTag; +} __attribute__ ((packed)); + +struct usb_cs_as_format_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bDescriptorSubType; + __u8 bFormatType; + __u8 bNrChannels; + __u8 bSubframeSize; + __u8 bBitResolution; + __u8 bSamfreqType; + __u8 tLowerSamFreq[3]; + __u8 tUpperSamFreq[3]; +} __attribute__ ((packed)); + +static const struct usb_interface_descriptor +z_audio_control_if_desc = { + .bLength = sizeof z_audio_control_if_desc, + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = 0, + .bAlternateSetting = 0, + .bNumEndpoints = 0, + .bInterfaceClass = USB_CLASS_AUDIO, + .bInterfaceSubClass = 0x1, + .bInterfaceProtocol = 0, + .iInterface = 0, +}; + +static const struct usb_interface_descriptor +z_audio_if_desc = { + .bLength = sizeof z_audio_if_desc, + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = 1, + .bAlternateSetting = 0, + .bNumEndpoints = 0, + .bInterfaceClass = USB_CLASS_AUDIO, + .bInterfaceSubClass = 0x2, + .bInterfaceProtocol = 0, + .iInterface = 0, +}; + +static const struct usb_interface_descriptor +z_audio_if_desc2 = { + .bLength = sizeof z_audio_if_desc, + .bDescriptorType = USB_DT_INTERFACE, + .bInterfaceNumber = 1, + .bAlternateSetting = 1, + .bNumEndpoints = 1, + .bInterfaceClass = USB_CLASS_AUDIO, + .bInterfaceSubClass = 0x2, + .bInterfaceProtocol = 0, + .iInterface = 0, +}; + +static const struct usb_cs_as_general_descriptor +z_audio_cs_as_if_desc = { + .bLength = 7, + .bDescriptorType = 0x24, + + .bDescriptorSubType = 0x01, + .bTerminalLink = 0x01, + .bDelay = 0x0, + .wFormatTag = __constant_cpu_to_le16 (0x0001) +}; + + +static const struct usb_cs_as_format_descriptor +z_audio_cs_as_format_desc = { + .bLength = 0xe, + .bDescriptorType = 0x24, + + .bDescriptorSubType = 2, + .bFormatType = 1, + .bNrChannels = 1, + .bSubframeSize = 1, + .bBitResolution = 8, + .bSamfreqType = 0, + .tLowerSamFreq = {0x7e, 0x13, 0x00}, + .tUpperSamFreq = {0xe2, 0xd6, 0x00}, +}; + +static const struct usb_endpoint_descriptor +z_iso_ep = { + .bLength = 0x09, + .bDescriptorType = 0x05, + .bEndpointAddress = 0x04, + .bmAttributes = 0x09, + .wMaxPacketSize = 0x0038, + .bInterval = 0x01, + .bRefresh = 0x00, + .bSynchAddress = 0x00, +}; + +static char z_iso_ep2[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; + +// 9 bytes +static char z_ac_interface_header_desc[] = +{ 0x09, 0x24, 0x01, 0x00, 0x01, 0x2b, 0x00, 0x01, 0x01 }; + +// 12 bytes +static char z_0[] = {0x0c, 0x24, 0x02, 0x01, 0x01, 0x01, 0x00, 0x02, + 0x03, 0x00, 0x00, 0x00}; +// 13 bytes +static char z_1[] = {0x0d, 0x24, 0x06, 0x02, 0x01, 0x02, 0x15, 0x00, + 0x02, 0x00, 0x02, 0x00, 0x00}; +// 9 bytes +static char z_2[] = {0x09, 0x24, 0x03, 0x03, 0x01, 0x03, 0x00, 0x02, + 0x00}; + +static char za_0[] = {0x09, 0x04, 0x01, 0x02, 0x01, 0x01, 0x02, 0x00, + 0x00}; + +static char za_1[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; + +static char za_2[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x01, 0x08, 0x00, + 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; + +static char za_3[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00, + 0x00}; + +static char za_4[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; + +static char za_5[] = {0x09, 0x04, 0x01, 0x03, 0x01, 0x01, 0x02, 0x00, + 0x00}; + +static char za_6[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; + +static char za_7[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x02, 0x10, 0x00, + 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; + +static char za_8[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00, + 0x00}; + +static char za_9[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; + +static char za_10[] = {0x09, 0x04, 0x01, 0x04, 0x01, 0x01, 0x02, 0x00, + 0x00}; + +static char za_11[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; + +static char za_12[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x02, 0x10, 0x00, + 0x73, 0x13, 0x00, 0xe2, 0xd6, 0x00}; + +static char za_13[] = {0x09, 0x05, 0x04, 0x09, 0xe0, 0x00, 0x01, 0x00, + 0x00}; + +static char za_14[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; + +static char za_15[] = {0x09, 0x04, 0x01, 0x05, 0x01, 0x01, 0x02, 0x00, + 0x00}; + +static char za_16[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; + +static char za_17[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x03, 0x14, 0x00, + 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; + +static char za_18[] = {0x09, 0x05, 0x04, 0x09, 0xa8, 0x00, 0x01, 0x00, + 0x00}; + +static char za_19[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; + +static char za_20[] = {0x09, 0x04, 0x01, 0x06, 0x01, 0x01, 0x02, 0x00, + 0x00}; + +static char za_21[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; + +static char za_22[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x03, 0x14, 0x00, + 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; + +static char za_23[] = {0x09, 0x05, 0x04, 0x09, 0x50, 0x01, 0x01, 0x00, + 0x00}; + +static char za_24[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; + + + +static const struct usb_descriptor_header *z_function [] = { + (struct usb_descriptor_header *) &z_audio_control_if_desc, + (struct usb_descriptor_header *) &z_ac_interface_header_desc, + (struct usb_descriptor_header *) &z_0, + (struct usb_descriptor_header *) &z_1, + (struct usb_descriptor_header *) &z_2, + (struct usb_descriptor_header *) &z_audio_if_desc, + (struct usb_descriptor_header *) &z_audio_if_desc2, + (struct usb_descriptor_header *) &z_audio_cs_as_if_desc, + (struct usb_descriptor_header *) &z_audio_cs_as_format_desc, + (struct usb_descriptor_header *) &z_iso_ep, + (struct usb_descriptor_header *) &z_iso_ep2, + (struct usb_descriptor_header *) &za_0, + (struct usb_descriptor_header *) &za_1, + (struct usb_descriptor_header *) &za_2, + (struct usb_descriptor_header *) &za_3, + (struct usb_descriptor_header *) &za_4, + (struct usb_descriptor_header *) &za_5, + (struct usb_descriptor_header *) &za_6, + (struct usb_descriptor_header *) &za_7, + (struct usb_descriptor_header *) &za_8, + (struct usb_descriptor_header *) &za_9, + (struct usb_descriptor_header *) &za_10, + (struct usb_descriptor_header *) &za_11, + (struct usb_descriptor_header *) &za_12, + (struct usb_descriptor_header *) &za_13, + (struct usb_descriptor_header *) &za_14, + (struct usb_descriptor_header *) &za_15, + (struct usb_descriptor_header *) &za_16, + (struct usb_descriptor_header *) &za_17, + (struct usb_descriptor_header *) &za_18, + (struct usb_descriptor_header *) &za_19, + (struct usb_descriptor_header *) &za_20, + (struct usb_descriptor_header *) &za_21, + (struct usb_descriptor_header *) &za_22, + (struct usb_descriptor_header *) &za_23, + (struct usb_descriptor_header *) &za_24, + NULL, +}; + +/* maxpacket and other transfer characteristics vary by speed. */ +#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs)) + +#else + +/* if there's no high speed support, maxpacket doesn't change. */ +#define ep_desc(g,hs,fs) fs + +#endif /* !CONFIG_USB_GADGET_DUALSPEED */ + +static char manufacturer [40]; +//static char serial [40]; +static char serial [] = "Ser 00 em"; + +/* static strings, in UTF-8 */ +static struct usb_string strings [] = { + { STRING_MANUFACTURER, manufacturer, }, + { STRING_PRODUCT, longname, }, + { STRING_SERIAL, serial, }, + { STRING_LOOPBACK, loopback, }, + { STRING_SOURCE_SINK, source_sink, }, + { } /* end of list */ +}; + +static struct usb_gadget_strings stringtab = { + .language = 0x0409, /* en-us */ + .strings = strings, +}; + +/* + * config descriptors are also handcrafted. these must agree with code + * that sets configurations, and with code managing interfaces and their + * altsettings. other complexity may come from: + * + * - high speed support, including "other speed config" rules + * - multiple configurations + * - interfaces with alternate settings + * - embedded class or vendor-specific descriptors + * + * this handles high speed, and has a second config that could as easily + * have been an alternate interface setting (on most hardware). + * + * NOTE: to demonstrate (and test) more USB capabilities, this driver + * should include an altsetting to test interrupt transfers, including + * high bandwidth modes at high speed. (Maybe work like Intel's test + * device?) + */ +static int +config_buf (struct usb_gadget *gadget, u8 *buf, u8 type, unsigned index) +{ + int len; + const struct usb_descriptor_header **function; + + function = z_function; + len = usb_gadget_config_buf (&z_config, buf, USB_BUFSIZ, function); + if (len < 0) + return len; + ((struct usb_config_descriptor *) buf)->bDescriptorType = type; + return len; +} + +/*-------------------------------------------------------------------------*/ + +static struct usb_request * +alloc_ep_req (struct usb_ep *ep, unsigned length) +{ + struct usb_request *req; + + req = usb_ep_alloc_request (ep, GFP_ATOMIC); + if (req) { + req->length = length; + req->buf = usb_ep_alloc_buffer (ep, length, + &req->dma, GFP_ATOMIC); + if (!req->buf) { + usb_ep_free_request (ep, req); + req = NULL; + } + } + return req; +} + +static void free_ep_req (struct usb_ep *ep, struct usb_request *req) +{ + if (req->buf) + usb_ep_free_buffer (ep, req->buf, req->dma, req->length); + usb_ep_free_request (ep, req); +} + +/*-------------------------------------------------------------------------*/ + +/* optionally require specific source/sink data patterns */ + +static int +check_read_data ( + struct zero_dev *dev, + struct usb_ep *ep, + struct usb_request *req +) +{ + unsigned i; + u8 *buf = req->buf; + + for (i = 0; i < req->actual; i++, buf++) { + switch (pattern) { + /* all-zeroes has no synchronization issues */ + case 0: + if (*buf == 0) + continue; + break; + /* mod63 stays in sync with short-terminated transfers, + * or otherwise when host and gadget agree on how large + * each usb transfer request should be. resync is done + * with set_interface or set_config. + */ + case 1: + if (*buf == (u8)(i % 63)) + continue; + break; + } + ERROR (dev, "bad OUT byte, buf [%d] = %d\n", i, *buf); + usb_ep_set_halt (ep); + return -EINVAL; + } + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static void zero_reset_config (struct zero_dev *dev) +{ + if (dev->config == 0) + return; + + DBG (dev, "reset config\n"); + + /* just disable endpoints, forcing completion of pending i/o. + * all our completion handlers free their requests in this case. + */ + if (dev->in_ep) { + usb_ep_disable (dev->in_ep); + dev->in_ep = NULL; + } + if (dev->out_ep) { + usb_ep_disable (dev->out_ep); + dev->out_ep = NULL; + } + dev->config = 0; + del_timer (&dev->resume); +} + +#define _write(f, buf, sz) (f->f_op->write(f, buf, sz, &f->f_pos)) + +static void +zero_isoc_complete (struct usb_ep *ep, struct usb_request *req) +{ + struct zero_dev *dev = ep->driver_data; + int status = req->status; + int i, j; + + switch (status) { + + case 0: /* normal completion? */ + //printk ("\nzero ---------------> isoc normal completion %d bytes\n", req->actual); + for (i=0, j=rbuf_start; i<req->actual; i++) { + //printk ("%02x ", ((__u8*)req->buf)[i]); + rbuf[j] = ((__u8*)req->buf)[i]; + j++; + if (j >= RBUF_LEN) j=0; + } + rbuf_start = j; + //printk ("\n\n"); + + if (rbuf_len < RBUF_LEN) { + rbuf_len += req->actual; + if (rbuf_len > RBUF_LEN) { + rbuf_len = RBUF_LEN; + } + } + + break; + + /* this endpoint is normally active while we're configured */ + case -ECONNABORTED: /* hardware forced ep reset */ + case -ECONNRESET: /* request dequeued */ + case -ESHUTDOWN: /* disconnect from host */ + VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status, + req->actual, req->length); + if (ep == dev->out_ep) + check_read_data (dev, ep, req); + free_ep_req (ep, req); + return; + + case -EOVERFLOW: /* buffer overrun on read means that + * we didn't provide a big enough + * buffer. + */ + default: +#if 1 + DBG (dev, "%s complete --> %d, %d/%d\n", ep->name, + status, req->actual, req->length); +#endif + case -EREMOTEIO: /* short read */ + break; + } + + status = usb_ep_queue (ep, req, GFP_ATOMIC); + if (status) { + ERROR (dev, "kill %s: resubmit %d bytes --> %d\n", + ep->name, req->length, status); + usb_ep_set_halt (ep); + /* FIXME recover later ... somehow */ + } +} + +static struct usb_request * +zero_start_isoc_ep (struct usb_ep *ep, int gfp_flags) +{ + struct usb_request *req; + int status; + + req = alloc_ep_req (ep, 512); + if (!req) + return NULL; + + req->complete = zero_isoc_complete; + + status = usb_ep_queue (ep, req, gfp_flags); + if (status) { + struct zero_dev *dev = ep->driver_data; + + ERROR (dev, "start %s --> %d\n", ep->name, status); + free_ep_req (ep, req); + req = NULL; + } + + return req; +} + +/* change our operational config. this code must agree with the code + * that returns config descriptors, and altsetting code. + * + * it's also responsible for power management interactions. some + * configurations might not work with our current power sources. + * + * note that some device controller hardware will constrain what this + * code can do, perhaps by disallowing more than one configuration or + * by limiting configuration choices (like the pxa2xx). + */ +static int +zero_set_config (struct zero_dev *dev, unsigned number, int gfp_flags) +{ + int result = 0; + struct usb_gadget *gadget = dev->gadget; + const struct usb_endpoint_descriptor *d; + struct usb_ep *ep; + + if (number == dev->config) + return 0; + + zero_reset_config (dev); + + gadget_for_each_ep (ep, gadget) { + + if (strcmp (ep->name, "ep4") == 0) { + + d = (struct usb_endpoint_descripter *)&za_23; // isoc ep desc for audio i/f alt setting 6 + result = usb_ep_enable (ep, d); + + if (result == 0) { + ep->driver_data = dev; + dev->in_ep = ep; + + if (zero_start_isoc_ep (ep, gfp_flags) != 0) { + + dev->in_ep = ep; + continue; + } + + usb_ep_disable (ep); + result = -EIO; + } + } + + } + + dev->config = number; + return result; +} + +/*-------------------------------------------------------------------------*/ + +static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req) +{ + if (req->status || req->actual != req->length) + DBG ((struct zero_dev *) ep->driver_data, + "setup complete --> %d, %d/%d\n", + req->status, req->actual, req->length); +} + +/* + * The setup() callback implements all the ep0 functionality that's + * not handled lower down, in hardware or the hardware driver (like + * device and endpoint feature flags, and their status). It's all + * housekeeping for the gadget function we're implementing. Most of + * the work is in config-specific setup. + */ +static int +zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) +{ + struct zero_dev *dev = get_gadget_data (gadget); + struct usb_request *req = dev->req; + int value = -EOPNOTSUPP; + + /* usually this stores reply data in the pre-allocated ep0 buffer, + * but config change events will reconfigure hardware. + */ + req->zero = 0; + switch (ctrl->bRequest) { + + case USB_REQ_GET_DESCRIPTOR: + + switch (ctrl->wValue >> 8) { + + case USB_DT_DEVICE: + value = min (ctrl->wLength, (u16) sizeof device_desc); + memcpy (req->buf, &device_desc, value); + break; +#ifdef CONFIG_USB_GADGET_DUALSPEED + case USB_DT_DEVICE_QUALIFIER: + if (!gadget->is_dualspeed) + break; + value = min (ctrl->wLength, (u16) sizeof dev_qualifier); + memcpy (req->buf, &dev_qualifier, value); + break; + + case USB_DT_OTHER_SPEED_CONFIG: + if (!gadget->is_dualspeed) + break; + // FALLTHROUGH +#endif /* CONFIG_USB_GADGET_DUALSPEED */ + case USB_DT_CONFIG: + value = config_buf (gadget, req->buf, + ctrl->wValue >> 8, + ctrl->wValue & 0xff); + if (value >= 0) + value = min (ctrl->wLength, (u16) value); + break; + + case USB_DT_STRING: + /* wIndex == language code. + * this driver only handles one language, you can + * add string tables for other languages, using + * any UTF-8 characters + */ + value = usb_gadget_get_string (&stringtab, + ctrl->wValue & 0xff, req->buf); + if (value >= 0) { + value = min (ctrl->wLength, (u16) value); + } + break; + } + break; + + /* currently two configs, two speeds */ + case USB_REQ_SET_CONFIGURATION: + if (ctrl->bRequestType != 0) + goto unknown; + + spin_lock (&dev->lock); + value = zero_set_config (dev, ctrl->wValue, GFP_ATOMIC); + spin_unlock (&dev->lock); + break; + case USB_REQ_GET_CONFIGURATION: + if (ctrl->bRequestType != USB_DIR_IN) + goto unknown; + *(u8 *)req->buf = dev->config; + value = min (ctrl->wLength, (u16) 1); + break; + + /* until we add altsetting support, or other interfaces, + * only 0/0 are possible. pxa2xx only supports 0/0 (poorly) + * and already killed pending endpoint I/O. + */ + case USB_REQ_SET_INTERFACE: + + if (ctrl->bRequestType != USB_RECIP_INTERFACE) + goto unknown; + spin_lock (&dev->lock); + if (dev->config) { + u8 config = dev->config; + + /* resets interface configuration, forgets about + * previous transaction state (queued bufs, etc) + * and re-inits endpoint state (toggle etc) + * no response queued, just zero status == success. + * if we had more than one interface we couldn't + * use this "reset the config" shortcut. + */ + zero_reset_config (dev); + zero_set_config (dev, config, GFP_ATOMIC); + value = 0; + } + spin_unlock (&dev->lock); + break; + case USB_REQ_GET_INTERFACE: + if ((ctrl->bRequestType == 0x21) && (ctrl->wIndex == 0x02)) { + value = ctrl->wLength; + break; + } + else { + if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)) + goto unknown; + if (!dev->config) + break; + if (ctrl->wIndex != 0) { + value = -EDOM; + break; + } + *(u8 *)req->buf = 0; + value = min (ctrl->wLength, (u16) 1); + } + break; + + /* + * These are the same vendor-specific requests supported by + * Intel's USB 2.0 compliance test devices. We exceed that + * device spec by allowing multiple-packet requests. + */ + case 0x5b: /* control WRITE test -- fill the buffer */ + if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR)) + goto unknown; + if (ctrl->wValue || ctrl->wIndex) + break; + /* just read that many bytes into the buffer */ + if (ctrl->wLength > USB_BUFSIZ) + break; + value = ctrl->wLength; + break; + case 0x5c: /* control READ test -- return the buffer */ + if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR)) + goto unknown; + if (ctrl->wValue || ctrl->wIndex) + break; + /* expect those bytes are still in the buffer; send back */ + if (ctrl->wLength > USB_BUFSIZ + || ctrl->wLength != req->length) + break; + value = ctrl->wLength; + break; + + case 0x01: // SET_CUR + case 0x02: + case 0x03: + case 0x04: + case 0x05: + value = ctrl->wLength; + break; + case 0x81: + switch (ctrl->wValue) { + case 0x0201: + case 0x0202: + ((u8*)req->buf)[0] = 0x00; + ((u8*)req->buf)[1] = 0xe3; + break; + case 0x0300: + case 0x0500: + ((u8*)req->buf)[0] = 0x00; + break; + } + //((u8*)req->buf)[0] = 0x81; + //((u8*)req->buf)[1] = 0x81; + value = ctrl->wLength; + break; + case 0x82: + switch (ctrl->wValue) { + case 0x0201: + case 0x0202: + ((u8*)req->buf)[0] = 0x00; + ((u8*)req->buf)[1] = 0xc3; + break; + case 0x0300: + case 0x0500: + ((u8*)req->buf)[0] = 0x00; + break; + } + //((u8*)req->buf)[0] = 0x82; + //((u8*)req->buf)[1] = 0x82; + value = ctrl->wLength; + break; + case 0x83: + switch (ctrl->wValue) { + case 0x0201: + case 0x0202: + ((u8*)req->buf)[0] = 0x00; + ((u8*)req->buf)[1] = 0x00; + break; + case 0x0300: + ((u8*)req->buf)[0] = 0x60; + break; + case 0x0500: + ((u8*)req->buf)[0] = 0x18; + break; + } + //((u8*)req->buf)[0] = 0x83; + //((u8*)req->buf)[1] = 0x83; + value = ctrl->wLength; + break; + case 0x84: + switch (ctrl->wValue) { + case 0x0201: + case 0x0202: + ((u8*)req->buf)[0] = 0x00; + ((u8*)req->buf)[1] = 0x01; + break; + case 0x0300: + case 0x0500: + ((u8*)req->buf)[0] = 0x08; + break; + } + //((u8*)req->buf)[0] = 0x84; + //((u8*)req->buf)[1] = 0x84; + value = ctrl->wLength; + break; + case 0x85: + ((u8*)req->buf)[0] = 0x85; + ((u8*)req->buf)[1] = 0x85; + value = ctrl->wLength; + break; + + + default: +unknown: + printk("unknown control req%02x.%02x v%04x i%04x l%d\n", + ctrl->bRequestType, ctrl->bRequest, + ctrl->wValue, ctrl->wIndex, ctrl->wLength); + } + + /* respond with data transfer before status phase? */ + if (value >= 0) { + req->length = value; + req->zero = value < ctrl->wLength + && (value % gadget->ep0->maxpacket) == 0; + value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC); + if (value < 0) { + DBG (dev, "ep_queue < 0 --> %d\n", value); + req->status = 0; + zero_setup_complete (gadget->ep0, req); + } + } + + /* device either stalls (value < 0) or reports success */ + return value; +} + +static void +zero_disconnect (struct usb_gadget *gadget) +{ + struct zero_dev *dev = get_gadget_data (gadget); + unsigned long flags; + + spin_lock_irqsave (&dev->lock, flags); + zero_reset_config (dev); + + /* a more significant application might have some non-usb + * activities to quiesce here, saving resources like power + * or pushing the notification up a network stack. + */ + spin_unlock_irqrestore (&dev->lock, flags); + + /* next we may get setup() calls to enumerate new connections; + * or an unbind() during shutdown (including removing module). + */ +} + +static void +zero_autoresume (unsigned long _dev) +{ + struct zero_dev *dev = (struct zero_dev *) _dev; + int status; + + /* normally the host would be woken up for something + * more significant than just a timer firing... + */ + if (dev->gadget->speed != USB_SPEED_UNKNOWN) { + status = usb_gadget_wakeup (dev->gadget); + DBG (dev, "wakeup --> %d\n", status); + } +} + +/*-------------------------------------------------------------------------*/ + +static void +zero_unbind (struct usb_gadget *gadget) +{ + struct zero_dev *dev = get_gadget_data (gadget); + + DBG (dev, "unbind\n"); + + /* we've already been disconnected ... no i/o is active */ + if (dev->req) + free_ep_req (gadget->ep0, dev->req); + del_timer_sync (&dev->resume); + kfree (dev); + set_gadget_data (gadget, NULL); +} + +static int +zero_bind (struct usb_gadget *gadget) +{ + struct zero_dev *dev; + //struct usb_ep *ep; + + printk("binding\n"); + /* + * DRIVER POLICY CHOICE: you may want to do this differently. + * One thing to avoid is reusing a bcdDevice revision code + * with different host-visible configurations or behavior + * restrictions -- using ep1in/ep2out vs ep1out/ep3in, etc + */ + //device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201); + + + /* ok, we made sense of the hardware ... */ + dev = kmalloc (sizeof *dev, SLAB_KERNEL); + if (!dev) + return -ENOMEM; + memset (dev, 0, sizeof *dev); + spin_lock_init (&dev->lock); + dev->gadget = gadget; + set_gadget_data (gadget, dev); + + /* preallocate control response and buffer */ + dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL); + if (!dev->req) + goto enomem; + dev->req->buf = usb_ep_alloc_buffer (gadget->ep0, USB_BUFSIZ, + &dev->req->dma, GFP_KERNEL); + if (!dev->req->buf) + goto enomem; + + dev->req->complete = zero_setup_complete; + + device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket; + +#ifdef CONFIG_USB_GADGET_DUALSPEED + /* assume ep0 uses the same value for both speeds ... */ + dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0; + + /* and that all endpoints are dual-speed */ + //hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress; + //hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress; +#endif + + usb_gadget_set_selfpowered (gadget); + + init_timer (&dev->resume); + dev->resume.function = zero_autoresume; + dev->resume.data = (unsigned long) dev; + + gadget->ep0->driver_data = dev; + + INFO (dev, "%s, version: " DRIVER_VERSION "\n", longname); + INFO (dev, "using %s, OUT %s IN %s\n", gadget->name, + EP_OUT_NAME, EP_IN_NAME); + + snprintf (manufacturer, sizeof manufacturer, + UTS_SYSNAME " " UTS_RELEASE " with %s", + gadget->name); + + return 0; + +enomem: + zero_unbind (gadget); + return -ENOMEM; +} + +/*-------------------------------------------------------------------------*/ + +static void +zero_suspend (struct usb_gadget *gadget) +{ + struct zero_dev *dev = get_gadget_data (gadget); + + if (gadget->speed == USB_SPEED_UNKNOWN) + return; + + if (autoresume) { + mod_timer (&dev->resume, jiffies + (HZ * autoresume)); + DBG (dev, "suspend, wakeup in %d seconds\n", autoresume); + } else + DBG (dev, "suspend\n"); +} + +static void +zero_resume (struct usb_gadget *gadget) +{ + struct zero_dev *dev = get_gadget_data (gadget); + + DBG (dev, "resume\n"); + del_timer (&dev->resume); +} + + +/*-------------------------------------------------------------------------*/ + +static struct usb_gadget_driver zero_driver = { +#ifdef CONFIG_USB_GADGET_DUALSPEED + .speed = USB_SPEED_HIGH, +#else + .speed = USB_SPEED_FULL, +#endif + .function = (char *) longname, + .bind = zero_bind, + .unbind = zero_unbind, + + .setup = zero_setup, + .disconnect = zero_disconnect, + + .suspend = zero_suspend, + .resume = zero_resume, + + .driver = { + .name = (char *) shortname, + // .shutdown = ... + // .suspend = ... + // .resume = ... + }, +}; + +MODULE_AUTHOR ("David Brownell"); +MODULE_LICENSE ("Dual BSD/GPL"); + +static struct proc_dir_entry *pdir, *pfile; + +static int isoc_read_data (char *page, char **start, + off_t off, int count, + int *eof, void *data) +{ + int i; + static int c = 0; + static int done = 0; + static int s = 0; + +/* + printk ("\ncount: %d\n", count); + printk ("rbuf_start: %d\n", rbuf_start); + printk ("rbuf_len: %d\n", rbuf_len); + printk ("off: %d\n", off); + printk ("start: %p\n\n", *start); +*/ + if (done) { + c = 0; + done = 0; + *eof = 1; + return 0; + } + + if (c == 0) { + if (rbuf_len == RBUF_LEN) + s = rbuf_start; + else s = 0; + } + + for (i=0; i<count && c<rbuf_len; i++, c++) { + page[i] = rbuf[(c+s) % RBUF_LEN]; + } + *start = page; + + if (c >= rbuf_len) { + *eof = 1; + done = 1; + } + + + return i; +} + +static int __init init (void) +{ + + int retval = 0; + + pdir = proc_mkdir("isoc_test", NULL); + if(pdir == NULL) { + retval = -ENOMEM; + printk("Error creating dir\n"); + goto done; + } + pdir->owner = THIS_MODULE; + + pfile = create_proc_read_entry("isoc_data", + 0444, pdir, + isoc_read_data, + NULL); + if (pfile == NULL) { + retval = -ENOMEM; + printk("Error creating file\n"); + goto no_file; + } + pfile->owner = THIS_MODULE; + + return usb_gadget_register_driver (&zero_driver); + + no_file: + remove_proc_entry("isoc_data", NULL); + done: + return retval; +} +module_init (init); + +static void __exit cleanup (void) +{ + + usb_gadget_unregister_driver (&zero_driver); + + remove_proc_entry("isoc_data", pdir); + remove_proc_entry("isoc_test", NULL); +} +module_exit (cleanup); diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_attr.c b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_attr.c new file mode 100644 index 0000000000..85435379d0 --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_attr.c @@ -0,0 +1,966 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.c $ + * $Revision: 1.2 $ + * $Date: 2008-11-21 05:39:15 $ + * $Change: 1064918 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + +/** @file + * + * The diagnostic interface will provide access to the controller for + * bringing up the hardware and testing. The Linux driver attributes + * feature will be used to provide the Linux Diagnostic + * Interface. These attributes are accessed through sysfs. + */ + +/** @page "Linux Module Attributes" + * + * The Linux module attributes feature is used to provide the Linux + * Diagnostic Interface. These attributes are accessed through sysfs. + * The diagnostic interface will provide access to the controller for + * bringing up the hardware and testing. + + + The following table shows the attributes. + <table> + <tr> + <td><b> Name</b></td> + <td><b> Description</b></td> + <td><b> Access</b></td> + </tr> + + <tr> + <td> mode </td> + <td> Returns the current mode: 0 for device mode, 1 for host mode</td> + <td> Read</td> + </tr> + + <tr> + <td> hnpcapable </td> + <td> Gets or sets the "HNP-capable" bit in the Core USB Configuraton Register. + Read returns the current value.</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> srpcapable </td> + <td> Gets or sets the "SRP-capable" bit in the Core USB Configuraton Register. + Read returns the current value.</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> hnp </td> + <td> Initiates the Host Negotiation Protocol. Read returns the status.</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> srp </td> + <td> Initiates the Session Request Protocol. Read returns the status.</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> buspower </td> + <td> Gets or sets the Power State of the bus (0 - Off or 1 - On)</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> bussuspend </td> + <td> Suspends the USB bus.</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> busconnected </td> + <td> Gets the connection status of the bus</td> + <td> Read</td> + </tr> + + <tr> + <td> gotgctl </td> + <td> Gets or sets the Core Control Status Register.</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> gusbcfg </td> + <td> Gets or sets the Core USB Configuration Register</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> grxfsiz </td> + <td> Gets or sets the Receive FIFO Size Register</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> gnptxfsiz </td> + <td> Gets or sets the non-periodic Transmit Size Register</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> gpvndctl </td> + <td> Gets or sets the PHY Vendor Control Register</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> ggpio </td> + <td> Gets the value in the lower 16-bits of the General Purpose IO Register + or sets the upper 16 bits.</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> guid </td> + <td> Gets or sets the value of the User ID Register</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> gsnpsid </td> + <td> Gets the value of the Synopsys ID Regester</td> + <td> Read</td> + </tr> + + <tr> + <td> devspeed </td> + <td> Gets or sets the device speed setting in the DCFG register</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> enumspeed </td> + <td> Gets the device enumeration Speed.</td> + <td> Read</td> + </tr> + + <tr> + <td> hptxfsiz </td> + <td> Gets the value of the Host Periodic Transmit FIFO</td> + <td> Read</td> + </tr> + + <tr> + <td> hprt0 </td> + <td> Gets or sets the value in the Host Port Control and Status Register</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> regoffset </td> + <td> Sets the register offset for the next Register Access</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> regvalue </td> + <td> Gets or sets the value of the register at the offset in the regoffset attribute.</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> remote_wakeup </td> + <td> On read, shows the status of Remote Wakeup. On write, initiates a remote + wakeup of the host. When bit 0 is 1 and Remote Wakeup is enabled, the Remote + Wakeup signalling bit in the Device Control Register is set for 1 + milli-second.</td> + <td> Read/Write</td> + </tr> + + <tr> + <td> regdump </td> + <td> Dumps the contents of core registers.</td> + <td> Read</td> + </tr> + + <tr> + <td> spramdump </td> + <td> Dumps the contents of core registers.</td> + <td> Read</td> + </tr> + + <tr> + <td> hcddump </td> + <td> Dumps the current HCD state.</td> + <td> Read</td> + </tr> + + <tr> + <td> hcd_frrem </td> + <td> Shows the average value of the Frame Remaining + field in the Host Frame Number/Frame Remaining register when an SOF interrupt + occurs. This can be used to determine the average interrupt latency. Also + shows the average Frame Remaining value for start_transfer and the "a" and + "b" sample points. The "a" and "b" sample points may be used during debugging + bto determine how long it takes to execute a section of the HCD code.</td> + <td> Read</td> + </tr> + + <tr> + <td> rd_reg_test </td> + <td> Displays the time required to read the GNPTXFSIZ register many times + (the output shows the number of times the register is read). + <td> Read</td> + </tr> + + <tr> + <td> wr_reg_test </td> + <td> Displays the time required to write the GNPTXFSIZ register many times + (the output shows the number of times the register is written). + <td> Read</td> + </tr> + + </table> + + Example usage: + To get the current mode: + cat /sys/devices/lm0/mode + + To power down the USB: + echo 0 > /sys/devices/lm0/buspower + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/stat.h> /* permission constants */ +#include <linux/version.h> + +#include <asm/io.h> + +#include "linux/dwc_otg_plat.h" +#include "dwc_otg_attr.h" +#include "dwc_otg_driver.h" +#include "dwc_otg_pcd.h" +#include "dwc_otg_hcd.h" + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) +/* + * MACROs for defining sysfs attribute + */ +#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \ +static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ +{ \ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ + uint32_t val; \ + val = dwc_read_reg32 (_addr_); \ + val = (val & (_mask_)) >> _shift_; \ + return sprintf (buf, "%s = 0x%x\n", _string_, val); \ +} +#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \ +static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ + uint32_t set = simple_strtoul(buf, NULL, 16); \ + uint32_t clear = set; \ + clear = ((~clear) << _shift_) & _mask_; \ + set = (set << _shift_) & _mask_; \ + dev_dbg(_dev, "Storing Address=0x%08x Set=0x%08x Clear=0x%08x\n", (uint32_t)_addr_, set, clear); \ + dwc_modify_reg32(_addr_, clear, set); \ + return count; \ +} + +/* + * MACROs for defining sysfs attribute for 32-bit registers + */ +#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \ +static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ +{ \ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ + uint32_t val; \ + val = dwc_read_reg32 (_addr_); \ + return sprintf (buf, "%s = 0x%08x\n", _string_, val); \ +} +#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \ +static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ + const char *buf, size_t count) \ +{ \ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ + uint32_t val = simple_strtoul(buf, NULL, 16); \ + dev_dbg(_dev, "Storing Address=0x%08x Val=0x%08x\n", (uint32_t)_addr_, val); \ + dwc_write_reg32(_addr_, val); \ + return count; \ +} + +#else + +/* + * MACROs for defining sysfs attribute + */ +#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \ +static ssize_t _otg_attr_name_##_show (struct device *_dev, char *buf) \ +{ \ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\ + uint32_t val; \ + val = dwc_read_reg32 (_addr_); \ + val = (val & (_mask_)) >> _shift_; \ + return sprintf (buf, "%s = 0x%x\n", _string_, val); \ +} +#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \ +static ssize_t _otg_attr_name_##_store (struct device *_dev, const char *buf, size_t count) \ +{ \ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\ + uint32_t set = simple_strtoul(buf, NULL, 16); \ + uint32_t clear = set; \ + clear = ((~clear) << _shift_) & _mask_; \ + set = (set << _shift_) & _mask_; \ + dev_dbg(_dev, "Storing Address=0x%08x Set=0x%08x Clear=0x%08x\n", (uint32_t)_addr_, set, clear); \ + dwc_modify_reg32(_addr_, clear, set); \ + return count; \ +} + +/* + * MACROs for defining sysfs attribute for 32-bit registers + */ +#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \ +static ssize_t _otg_attr_name_##_show (struct device *_dev, char *buf) \ +{ \ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\ + uint32_t val; \ + val = dwc_read_reg32 (_addr_); \ + return sprintf (buf, "%s = 0x%08x\n", _string_, val); \ +} +#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \ +static ssize_t _otg_attr_name_##_store (struct device *_dev, const char *buf, size_t count) \ +{ \ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\ + uint32_t val = simple_strtoul(buf, NULL, 16); \ + dev_dbg(_dev, "Storing Address=0x%08x Val=0x%08x\n", (uint32_t)_addr_, val); \ + dwc_write_reg32(_addr_, val); \ + return count; \ +} + +#endif + +#define DWC_OTG_DEVICE_ATTR_BITFIELD_RW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \ +DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \ +DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \ +DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store); + +#define DWC_OTG_DEVICE_ATTR_BITFIELD_RO(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \ +DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \ +DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL); + +#define DWC_OTG_DEVICE_ATTR_REG32_RW(_otg_attr_name_,_addr_,_string_) \ +DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \ +DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \ +DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store); + +#define DWC_OTG_DEVICE_ATTR_REG32_RO(_otg_attr_name_,_addr_,_string_) \ +DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \ +DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL); + + +/** @name Functions for Show/Store of Attributes */ +/**@{*/ + +/** + * Show the register offset of the Register Access. + */ +static ssize_t regoffset_show( struct device *_dev, +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + struct device_attribute *attr, +#endif + char *buf) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + return snprintf(buf, sizeof("0xFFFFFFFF\n")+1,"0x%08x\n", otg_dev->reg_offset); +} + +/** + * Set the register offset for the next Register Access Read/Write + */ +static ssize_t regoffset_store( struct device *_dev, +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + struct device_attribute *attr, +#endif + const char *buf, + size_t count ) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + + uint32_t offset = simple_strtoul(buf, NULL, 16); + //dev_dbg(_dev, "Offset=0x%08x\n", offset); + if (offset < 0x00040000 ) { + otg_dev->reg_offset = offset; + } + else { + dev_err( _dev, "invalid offset\n" ); + } + + return count; +} +DEVICE_ATTR(regoffset, S_IRUGO|S_IWUSR, (void *)regoffset_show, regoffset_store); + + +/** + * Show the value of the register at the offset in the reg_offset + * attribute. + */ +static ssize_t regvalue_show( struct device *_dev, +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + struct device_attribute *attr, +#endif + char *buf) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + + uint32_t val; + volatile uint32_t *addr; + + if (otg_dev->reg_offset != 0xFFFFFFFF && + 0 != otg_dev->base) { + /* Calculate the address */ + addr = (uint32_t*)(otg_dev->reg_offset + + (uint8_t*)otg_dev->base); + //dev_dbg(_dev, "@0x%08x\n", (unsigned)addr); + val = dwc_read_reg32( addr ); + return snprintf(buf, sizeof("Reg@0xFFFFFFFF = 0xFFFFFFFF\n")+1, + "Reg@0x%06x = 0x%08x\n", + otg_dev->reg_offset, val); + } + else { + dev_err(_dev, "Invalid offset (0x%0x)\n", + otg_dev->reg_offset); + return sprintf(buf, "invalid offset\n" ); + } +} + +/** + * Store the value in the register at the offset in the reg_offset + * attribute. + * + */ +static ssize_t regvalue_store( struct device *_dev, +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + struct device_attribute *attr, +#endif + const char *buf, + size_t count ) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + + volatile uint32_t * addr; + uint32_t val = simple_strtoul(buf, NULL, 16); + //dev_dbg(_dev, "Offset=0x%08x Val=0x%08x\n", otg_dev->reg_offset, val); + if (otg_dev->reg_offset != 0xFFFFFFFF && 0 != otg_dev->base) { + /* Calculate the address */ + addr = (uint32_t*)(otg_dev->reg_offset + + (uint8_t*)otg_dev->base); + //dev_dbg(_dev, "@0x%08x\n", (unsigned)addr); + dwc_write_reg32( addr, val ); + } + else { + dev_err(_dev, "Invalid Register Offset (0x%08x)\n", + otg_dev->reg_offset); + } + return count; +} +DEVICE_ATTR(regvalue, S_IRUGO|S_IWUSR, regvalue_show, regvalue_store); + +/* + * Attributes + */ +DWC_OTG_DEVICE_ATTR_BITFIELD_RO(mode,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<20),20,"Mode"); +DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hnpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<9),9,"Mode"); +DWC_OTG_DEVICE_ATTR_BITFIELD_RW(srpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<8),8,"Mode"); + +//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(buspower,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode"); +//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(bussuspend,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode"); +DWC_OTG_DEVICE_ATTR_BITFIELD_RO(busconnected,otg_dev->core_if->host_if->hprt0,0x01,0,"Bus Connected"); + +DWC_OTG_DEVICE_ATTR_REG32_RW(gotgctl,&(otg_dev->core_if->core_global_regs->gotgctl),"GOTGCTL"); +DWC_OTG_DEVICE_ATTR_REG32_RW(gusbcfg,&(otg_dev->core_if->core_global_regs->gusbcfg),"GUSBCFG"); +DWC_OTG_DEVICE_ATTR_REG32_RW(grxfsiz,&(otg_dev->core_if->core_global_regs->grxfsiz),"GRXFSIZ"); +DWC_OTG_DEVICE_ATTR_REG32_RW(gnptxfsiz,&(otg_dev->core_if->core_global_regs->gnptxfsiz),"GNPTXFSIZ"); +DWC_OTG_DEVICE_ATTR_REG32_RW(gpvndctl,&(otg_dev->core_if->core_global_regs->gpvndctl),"GPVNDCTL"); +DWC_OTG_DEVICE_ATTR_REG32_RW(ggpio,&(otg_dev->core_if->core_global_regs->ggpio),"GGPIO"); +DWC_OTG_DEVICE_ATTR_REG32_RW(guid,&(otg_dev->core_if->core_global_regs->guid),"GUID"); +DWC_OTG_DEVICE_ATTR_REG32_RO(gsnpsid,&(otg_dev->core_if->core_global_regs->gsnpsid),"GSNPSID"); +DWC_OTG_DEVICE_ATTR_BITFIELD_RW(devspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dcfg),0x3,0,"Device Speed"); +DWC_OTG_DEVICE_ATTR_BITFIELD_RO(enumspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dsts),0x6,1,"Device Enumeration Speed"); + +DWC_OTG_DEVICE_ATTR_REG32_RO(hptxfsiz,&(otg_dev->core_if->core_global_regs->hptxfsiz),"HPTXFSIZ"); +DWC_OTG_DEVICE_ATTR_REG32_RW(hprt0,otg_dev->core_if->host_if->hprt0,"HPRT0"); + + +/** + * @todo Add code to initiate the HNP. + */ +/** + * Show the HNP status bit + */ +static ssize_t hnp_show( struct device *_dev, +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + struct device_attribute *attr, +#endif + char *buf) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + + gotgctl_data_t val; + val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl)); + return sprintf (buf, "HstNegScs = 0x%x\n", val.b.hstnegscs); +} + +/** + * Set the HNP Request bit + */ +static ssize_t hnp_store( struct device *_dev, +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + struct device_attribute *attr, +#endif + const char *buf, + size_t count ) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + + uint32_t in = simple_strtoul(buf, NULL, 16); + uint32_t *addr = (uint32_t *)&(otg_dev->core_if->core_global_regs->gotgctl); + gotgctl_data_t mem; + mem.d32 = dwc_read_reg32(addr); + mem.b.hnpreq = in; + dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32); + dwc_write_reg32(addr, mem.d32); + return count; +} +DEVICE_ATTR(hnp, 0644, hnp_show, hnp_store); + +/** + * @todo Add code to initiate the SRP. + */ +/** + * Show the SRP status bit + */ +static ssize_t srp_show( struct device *_dev, +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + struct device_attribute *attr, +#endif + char *buf) +{ +#ifndef DWC_HOST_ONLY + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + + gotgctl_data_t val; + val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl)); + return sprintf (buf, "SesReqScs = 0x%x\n", val.b.sesreqscs); +#else + return sprintf(buf, "Host Only Mode!\n"); +#endif +} + + + +/** + * Set the SRP Request bit + */ +static ssize_t srp_store( struct device *_dev, +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + struct device_attribute *attr, +#endif + const char *buf, + size_t count ) +{ +#ifndef DWC_HOST_ONLY + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + + dwc_otg_pcd_initiate_srp(otg_dev->pcd); +#endif + return count; +} +DEVICE_ATTR(srp, 0644, srp_show, srp_store); + +/** + * @todo Need to do more for power on/off? + */ +/** + * Show the Bus Power status + */ +static ssize_t buspower_show( struct device *_dev, +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + struct device_attribute *attr, +#endif + char *buf) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + + hprt0_data_t val; + val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0); + return sprintf (buf, "Bus Power = 0x%x\n", val.b.prtpwr); +} + + +/** + * Set the Bus Power status + */ +static ssize_t buspower_store( struct device *_dev, +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + struct device_attribute *attr, +#endif + const char *buf, + size_t count ) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + + uint32_t on = simple_strtoul(buf, NULL, 16); + uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0; + hprt0_data_t mem; + + mem.d32 = dwc_read_reg32(addr); + mem.b.prtpwr = on; + + //dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32); + dwc_write_reg32(addr, mem.d32); + + return count; +} +DEVICE_ATTR(buspower, 0644, buspower_show, buspower_store); + +/** + * @todo Need to do more for suspend? + */ +/** + * Show the Bus Suspend status + */ +static ssize_t bussuspend_show( struct device *_dev, +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + struct device_attribute *attr, +#endif + char *buf) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + + hprt0_data_t val; + val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0); + return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp); +} + +/** + * Set the Bus Suspend status + */ +static ssize_t bussuspend_store( struct device *_dev, +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + struct device_attribute *attr, +#endif + const char *buf, + size_t count ) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + + uint32_t in = simple_strtoul(buf, NULL, 16); + uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0; + hprt0_data_t mem; + mem.d32 = dwc_read_reg32(addr); + mem.b.prtsusp = in; + dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32); + dwc_write_reg32(addr, mem.d32); + return count; +} +DEVICE_ATTR(bussuspend, 0644, bussuspend_show, bussuspend_store); + +/** + * Show the status of Remote Wakeup. + */ +static ssize_t remote_wakeup_show( struct device *_dev, +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + struct device_attribute *attr, +#endif + char *buf) +{ +#ifndef DWC_HOST_ONLY + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + + dctl_data_t val; + val.d32 = + dwc_read_reg32( &otg_dev->core_if->dev_if->dev_global_regs->dctl); + return sprintf( buf, "Remote Wakeup = %d Enabled = %d\n", + val.b.rmtwkupsig, otg_dev->pcd->remote_wakeup_enable); +#else + return sprintf(buf, "Host Only Mode!\n"); +#endif +} +/** + * Initiate a remote wakeup of the host. The Device control register + * Remote Wakeup Signal bit is written if the PCD Remote wakeup enable + * flag is set. + * + */ +static ssize_t remote_wakeup_store( struct device *_dev, +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + struct device_attribute *attr, +#endif + const char *buf, + size_t count ) +{ +#ifndef DWC_HOST_ONLY + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + + uint32_t val = simple_strtoul(buf, NULL, 16); + if (val&1) { + dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 1); + } + else { + dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 0); + } +#endif + return count; +} +DEVICE_ATTR(remote_wakeup, S_IRUGO|S_IWUSR, remote_wakeup_show, + remote_wakeup_store); + +/** + * Dump global registers and either host or device registers (depending on the + * current mode of the core). + */ +static ssize_t regdump_show( struct device *_dev, +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + struct device_attribute *attr, +#endif + char *buf) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + + dwc_otg_dump_global_registers( otg_dev->core_if); + if (dwc_otg_is_host_mode(otg_dev->core_if)) { + dwc_otg_dump_host_registers( otg_dev->core_if); + } else { + dwc_otg_dump_dev_registers( otg_dev->core_if); + + } + return sprintf( buf, "Register Dump\n" ); +} + +DEVICE_ATTR(regdump, S_IRUGO|S_IWUSR, regdump_show, 0); + +/** + * Dump global registers and either host or device registers (depending on the + * current mode of the core). + */ +static ssize_t spramdump_show( struct device *_dev, +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + struct device_attribute *attr, +#endif + char *buf) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + + dwc_otg_dump_spram( otg_dev->core_if); + + return sprintf( buf, "SPRAM Dump\n" ); +} + +DEVICE_ATTR(spramdump, S_IRUGO|S_IWUSR, spramdump_show, 0); + +/** + * Dump the current hcd state. + */ +static ssize_t hcddump_show( struct device *_dev, +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + struct device_attribute *attr, +#endif + char *buf) +{ +#ifndef DWC_DEVICE_ONLY + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + + dwc_otg_hcd_dump_state(otg_dev->hcd); +#endif + return sprintf( buf, "HCD Dump\n" ); +} + +DEVICE_ATTR(hcddump, S_IRUGO|S_IWUSR, hcddump_show, 0); + +/** + * Dump the average frame remaining at SOF. This can be used to + * determine average interrupt latency. Frame remaining is also shown for + * start transfer and two additional sample points. + */ +static ssize_t hcd_frrem_show( struct device *_dev, +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + struct device_attribute *attr, +#endif + char *buf) +{ +#ifndef DWC_DEVICE_ONLY + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + + dwc_otg_hcd_dump_frrem(otg_dev->hcd); +#endif + return sprintf( buf, "HCD Dump Frame Remaining\n" ); +} + +DEVICE_ATTR(hcd_frrem, S_IRUGO|S_IWUSR, hcd_frrem_show, 0); + +/** + * Displays the time required to read the GNPTXFSIZ register many times (the + * output shows the number of times the register is read). + */ +#define RW_REG_COUNT 10000000 +#define MSEC_PER_JIFFIE 1000/HZ +static ssize_t rd_reg_test_show( struct device *_dev, +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + struct device_attribute *attr, +#endif + char *buf) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + + int i; + int time; + int start_jiffies; + + printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n", + HZ, MSEC_PER_JIFFIE, loops_per_jiffy); + start_jiffies = jiffies; + for (i = 0; i < RW_REG_COUNT; i++) { + dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz); + } + time = jiffies - start_jiffies; + return sprintf( buf, "Time to read GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n", + RW_REG_COUNT, time * MSEC_PER_JIFFIE, time ); +} + +DEVICE_ATTR(rd_reg_test, S_IRUGO|S_IWUSR, rd_reg_test_show, 0); + +/** + * Displays the time required to write the GNPTXFSIZ register many times (the + * output shows the number of times the register is written). + */ +static ssize_t wr_reg_test_show( struct device *_dev, +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + struct device_attribute *attr, +#endif + char *buf) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); + + uint32_t reg_val; + int i; + int time; + int start_jiffies; + + printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n", + HZ, MSEC_PER_JIFFIE, loops_per_jiffy); + reg_val = dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz); + start_jiffies = jiffies; + for (i = 0; i < RW_REG_COUNT; i++) { + dwc_write_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz, reg_val); + } + time = jiffies - start_jiffies; + return sprintf( buf, "Time to write GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n", + RW_REG_COUNT, time * MSEC_PER_JIFFIE, time); +} + +DEVICE_ATTR(wr_reg_test, S_IRUGO|S_IWUSR, wr_reg_test_show, 0); +/**@}*/ + +/** + * Create the device files + */ +void dwc_otg_attr_create (struct device *dev) +{ + int error; + + error = device_create_file(dev, &dev_attr_regoffset); + error = device_create_file(dev, &dev_attr_regvalue); + error = device_create_file(dev, &dev_attr_mode); + error = device_create_file(dev, &dev_attr_hnpcapable); + error = device_create_file(dev, &dev_attr_srpcapable); + error = device_create_file(dev, &dev_attr_hnp); + error = device_create_file(dev, &dev_attr_srp); + error = device_create_file(dev, &dev_attr_buspower); + error = device_create_file(dev, &dev_attr_bussuspend); + error = device_create_file(dev, &dev_attr_busconnected); + error = device_create_file(dev, &dev_attr_gotgctl); + error = device_create_file(dev, &dev_attr_gusbcfg); + error = device_create_file(dev, &dev_attr_grxfsiz); + error = device_create_file(dev, &dev_attr_gnptxfsiz); + error = device_create_file(dev, &dev_attr_gpvndctl); + error = device_create_file(dev, &dev_attr_ggpio); + error = device_create_file(dev, &dev_attr_guid); + error = device_create_file(dev, &dev_attr_gsnpsid); + error = device_create_file(dev, &dev_attr_devspeed); + error = device_create_file(dev, &dev_attr_enumspeed); + error = device_create_file(dev, &dev_attr_hptxfsiz); + error = device_create_file(dev, &dev_attr_hprt0); + error = device_create_file(dev, &dev_attr_remote_wakeup); + error = device_create_file(dev, &dev_attr_regdump); + error = device_create_file(dev, &dev_attr_spramdump); + error = device_create_file(dev, &dev_attr_hcddump); + error = device_create_file(dev, &dev_attr_hcd_frrem); + error = device_create_file(dev, &dev_attr_rd_reg_test); + error = device_create_file(dev, &dev_attr_wr_reg_test); +} + +/** + * Remove the device files + */ +void dwc_otg_attr_remove (struct device *dev) +{ + device_remove_file(dev, &dev_attr_regoffset); + device_remove_file(dev, &dev_attr_regvalue); + device_remove_file(dev, &dev_attr_mode); + device_remove_file(dev, &dev_attr_hnpcapable); + device_remove_file(dev, &dev_attr_srpcapable); + device_remove_file(dev, &dev_attr_hnp); + device_remove_file(dev, &dev_attr_srp); + device_remove_file(dev, &dev_attr_buspower); + device_remove_file(dev, &dev_attr_bussuspend); + device_remove_file(dev, &dev_attr_busconnected); + device_remove_file(dev, &dev_attr_gotgctl); + device_remove_file(dev, &dev_attr_gusbcfg); + device_remove_file(dev, &dev_attr_grxfsiz); + device_remove_file(dev, &dev_attr_gnptxfsiz); + device_remove_file(dev, &dev_attr_gpvndctl); + device_remove_file(dev, &dev_attr_ggpio); + device_remove_file(dev, &dev_attr_guid); + device_remove_file(dev, &dev_attr_gsnpsid); + device_remove_file(dev, &dev_attr_devspeed); + device_remove_file(dev, &dev_attr_enumspeed); + device_remove_file(dev, &dev_attr_hptxfsiz); + device_remove_file(dev, &dev_attr_hprt0); + device_remove_file(dev, &dev_attr_remote_wakeup); + device_remove_file(dev, &dev_attr_regdump); + device_remove_file(dev, &dev_attr_spramdump); + device_remove_file(dev, &dev_attr_hcddump); + device_remove_file(dev, &dev_attr_hcd_frrem); + device_remove_file(dev, &dev_attr_rd_reg_test); + device_remove_file(dev, &dev_attr_wr_reg_test); +} diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_attr.h b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_attr.h new file mode 100644 index 0000000000..0862b2711b --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_attr.h @@ -0,0 +1,67 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.h $ + * $Revision: 1.2 $ + * $Date: 2008-11-21 05:39:15 $ + * $Change: 477051 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + +#if !defined(__DWC_OTG_ATTR_H__) +#define __DWC_OTG_ATTR_H__ + +/** @file + * This file contains the interface to the Linux device attributes. + */ +extern struct device_attribute dev_attr_regoffset; +extern struct device_attribute dev_attr_regvalue; + +extern struct device_attribute dev_attr_mode; +extern struct device_attribute dev_attr_hnpcapable; +extern struct device_attribute dev_attr_srpcapable; +extern struct device_attribute dev_attr_hnp; +extern struct device_attribute dev_attr_srp; +extern struct device_attribute dev_attr_buspower; +extern struct device_attribute dev_attr_bussuspend; +extern struct device_attribute dev_attr_busconnected; +extern struct device_attribute dev_attr_gotgctl; +extern struct device_attribute dev_attr_gusbcfg; +extern struct device_attribute dev_attr_grxfsiz; +extern struct device_attribute dev_attr_gnptxfsiz; +extern struct device_attribute dev_attr_gpvndctl; +extern struct device_attribute dev_attr_ggpio; +extern struct device_attribute dev_attr_guid; +extern struct device_attribute dev_attr_gsnpsid; +extern struct device_attribute dev_attr_devspeed; +extern struct device_attribute dev_attr_enumspeed; +extern struct device_attribute dev_attr_hptxfsiz; +extern struct device_attribute dev_attr_hprt0; + +void dwc_otg_attr_create (struct device *dev); +void dwc_otg_attr_remove (struct device *dev); + +#endif diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_cil.c b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_cil.c new file mode 100644 index 0000000000..89aa83ec90 --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_cil.c @@ -0,0 +1,3692 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.c $ + * $Revision: 1.7 $ + * $Date: 2008-12-22 11:43:05 $ + * $Change: 1117667 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + +/** @file + * + * The Core Interface Layer provides basic services for accessing and + * managing the DWC_otg hardware. These services are used by both the + * Host Controller Driver and the Peripheral Controller Driver. + * + * The CIL manages the memory map for the core so that the HCD and PCD + * don't have to do this separately. It also handles basic tasks like + * reading/writing the registers and data FIFOs in the controller. + * Some of the data access functions provide encapsulation of several + * operations required to perform a task, such as writing multiple + * registers to start a transfer. Finally, the CIL performs basic + * services that are not specific to either the host or device modes + * of operation. These services include management of the OTG Host + * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A + * Diagnostic API is also provided to allow testing of the controller + * hardware. + * + * The Core Interface Layer has the following requirements: + * - Provides basic controller operations. + * - Minimal use of OS services. + * - The OS services used will be abstracted by using inline functions + * or macros. + * + */ +#include <asm/unaligned.h> +#include <linux/dma-mapping.h> +#ifdef DEBUG +#include <linux/jiffies.h> +#endif + +#include "linux/dwc_otg_plat.h" +#include "dwc_otg_regs.h" +#include "dwc_otg_cil.h" + +/* Included only to access hc->qh for non-dword buffer handling + * TODO: account it + */ +#include "dwc_otg_hcd.h" + +/** + * This function is called to initialize the DWC_otg CSR data + * structures. The register addresses in the device and host + * structures are initialized from the base address supplied by the + * caller. The calling function must make the OS calls to get the + * base address of the DWC_otg controller registers. The core_params + * argument holds the parameters that specify how the core should be + * configured. + * + * @param[in] reg_base_addr Base address of DWC_otg core registers + * @param[in] core_params Pointer to the core configuration parameters + * + */ +dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *reg_base_addr, + dwc_otg_core_params_t *core_params) +{ + dwc_otg_core_if_t *core_if = 0; + dwc_otg_dev_if_t *dev_if = 0; + dwc_otg_host_if_t *host_if = 0; + uint8_t *reg_base = (uint8_t *)reg_base_addr; + int i = 0; + + DWC_DEBUGPL(DBG_CILV, "%s(%p,%p)\n", __func__, reg_base_addr, core_params); + + core_if = kmalloc(sizeof(dwc_otg_core_if_t), GFP_KERNEL); + + if (core_if == 0) { + DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_core_if_t failed\n"); + return 0; + } + + memset(core_if, 0, sizeof(dwc_otg_core_if_t)); + + core_if->core_params = core_params; + core_if->core_global_regs = (dwc_otg_core_global_regs_t *)reg_base; + + /* + * Allocate the Device Mode structures. + */ + dev_if = kmalloc(sizeof(dwc_otg_dev_if_t), GFP_KERNEL); + + if (dev_if == 0) { + DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_dev_if_t failed\n"); + kfree(core_if); + return 0; + } + + dev_if->dev_global_regs = + (dwc_otg_device_global_regs_t *)(reg_base + DWC_DEV_GLOBAL_REG_OFFSET); + + for (i=0; i<MAX_EPS_CHANNELS; i++) + { + dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *) + (reg_base + DWC_DEV_IN_EP_REG_OFFSET + + (i * DWC_EP_REG_OFFSET)); + + dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *) + (reg_base + DWC_DEV_OUT_EP_REG_OFFSET + + (i * DWC_EP_REG_OFFSET)); + DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n", + i, &dev_if->in_ep_regs[i]->diepctl); + DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n", + i, &dev_if->out_ep_regs[i]->doepctl); + } + + dev_if->speed = 0; // unknown + + core_if->dev_if = dev_if; + + /* + * Allocate the Host Mode structures. + */ + host_if = kmalloc(sizeof(dwc_otg_host_if_t), GFP_KERNEL); + + if (host_if == 0) { + DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_host_if_t failed\n"); + kfree(dev_if); + kfree(core_if); + return 0; + } + + host_if->host_global_regs = (dwc_otg_host_global_regs_t *) + (reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET); + + host_if->hprt0 = (uint32_t*)(reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET); + + for (i=0; i<MAX_EPS_CHANNELS; i++) + { + host_if->hc_regs[i] = (dwc_otg_hc_regs_t *) + (reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET + + (i * DWC_OTG_CHAN_REGS_OFFSET)); + DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n", + i, &host_if->hc_regs[i]->hcchar); + } + + host_if->num_host_channels = MAX_EPS_CHANNELS; + core_if->host_if = host_if; + + for (i=0; i<MAX_EPS_CHANNELS; i++) + { + core_if->data_fifo[i] = + (uint32_t *)(reg_base + DWC_OTG_DATA_FIFO_OFFSET + + (i * DWC_OTG_DATA_FIFO_SIZE)); + DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08x\n", + i, (unsigned)core_if->data_fifo[i]); + } + + core_if->pcgcctl = (uint32_t*)(reg_base + DWC_OTG_PCGCCTL_OFFSET); + + /* + * Store the contents of the hardware configuration registers here for + * easy access later. + */ + core_if->hwcfg1.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg1); + core_if->hwcfg2.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg2); + core_if->hwcfg3.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg3); + core_if->hwcfg4.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg4); + + DWC_DEBUGPL(DBG_CILV,"hwcfg1=%08x\n",core_if->hwcfg1.d32); + DWC_DEBUGPL(DBG_CILV,"hwcfg2=%08x\n",core_if->hwcfg2.d32); + DWC_DEBUGPL(DBG_CILV,"hwcfg3=%08x\n",core_if->hwcfg3.d32); + DWC_DEBUGPL(DBG_CILV,"hwcfg4=%08x\n",core_if->hwcfg4.d32); + + core_if->hcfg.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hcfg); + core_if->dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg); + + DWC_DEBUGPL(DBG_CILV,"hcfg=%08x\n",core_if->hcfg.d32); + DWC_DEBUGPL(DBG_CILV,"dcfg=%08x\n",core_if->dcfg.d32); + + DWC_DEBUGPL(DBG_CILV,"op_mode=%0x\n",core_if->hwcfg2.b.op_mode); + DWC_DEBUGPL(DBG_CILV,"arch=%0x\n",core_if->hwcfg2.b.architecture); + DWC_DEBUGPL(DBG_CILV,"num_dev_ep=%d\n",core_if->hwcfg2.b.num_dev_ep); + DWC_DEBUGPL(DBG_CILV,"num_host_chan=%d\n",core_if->hwcfg2.b.num_host_chan); + DWC_DEBUGPL(DBG_CILV,"nonperio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.nonperio_tx_q_depth); + DWC_DEBUGPL(DBG_CILV,"host_perio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.host_perio_tx_q_depth); + DWC_DEBUGPL(DBG_CILV,"dev_token_q_depth=0x%0x\n",core_if->hwcfg2.b.dev_token_q_depth); + + DWC_DEBUGPL(DBG_CILV,"Total FIFO SZ=%d\n", core_if->hwcfg3.b.dfifo_depth); + DWC_DEBUGPL(DBG_CILV,"xfer_size_cntr_width=%0x\n", core_if->hwcfg3.b.xfer_size_cntr_width); + + /* + * Set the SRP sucess bit for FS-I2c + */ + core_if->srp_success = 0; + core_if->srp_timer_started = 0; + + + /* + * Create new workqueue and init works + */ + core_if->wq_otg = create_singlethread_workqueue("dwc_otg"); + if(core_if->wq_otg == 0) { + DWC_DEBUGPL(DBG_CIL, "Creation of wq_otg failed\n"); + kfree(host_if); + kfree(dev_if); + kfree(core_if); + return 0 * HZ; + } + + + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + + INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change, core_if); + INIT_WORK(&core_if->w_wkp, w_wakeup_detected, core_if); + +#else + + INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change); + INIT_DELAYED_WORK(&core_if->w_wkp, w_wakeup_detected); + +#endif + return core_if; +} + +/** + * This function frees the structures allocated by dwc_otg_cil_init(). + * + * @param[in] core_if The core interface pointer returned from + * dwc_otg_cil_init(). + * + */ +void dwc_otg_cil_remove(dwc_otg_core_if_t *core_if) +{ + /* Disable all interrupts */ + dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, 1, 0); + dwc_write_reg32(&core_if->core_global_regs->gintmsk, 0); + + if (core_if->wq_otg) { + destroy_workqueue(core_if->wq_otg); + } + if (core_if->dev_if) { + kfree(core_if->dev_if); + } + if (core_if->host_if) { + kfree(core_if->host_if); + } + kfree(core_if); +} + +/** + * This function enables the controller's Global Interrupt in the AHB Config + * register. + * + * @param[in] core_if Programming view of DWC_otg controller. + */ +void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t *core_if) +{ + gahbcfg_data_t ahbcfg = { .d32 = 0}; + ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */ + dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32); +} + +/** + * This function disables the controller's Global Interrupt in the AHB Config + * register. + * + * @param[in] core_if Programming view of DWC_otg controller. + */ +void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t *core_if) +{ + gahbcfg_data_t ahbcfg = { .d32 = 0}; + ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */ + dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0); +} + +/** + * This function initializes the commmon interrupts, used in both + * device and host modes. + * + * @param[in] core_if Programming view of the DWC_otg controller + * + */ +static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t *core_if) +{ + dwc_otg_core_global_regs_t *global_regs = + core_if->core_global_regs; + gintmsk_data_t intr_mask = { .d32 = 0}; + + /* Clear any pending OTG Interrupts */ + dwc_write_reg32(&global_regs->gotgint, 0xFFFFFFFF); + + /* Clear any pending interrupts */ + dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF); + + /* + * Enable the interrupts in the GINTMSK. + */ + intr_mask.b.modemismatch = 1; + intr_mask.b.otgintr = 1; + + if (!core_if->dma_enable) { + intr_mask.b.rxstsqlvl = 1; + } + + intr_mask.b.conidstschng = 1; + intr_mask.b.wkupintr = 1; + intr_mask.b.disconnect = 1; + intr_mask.b.usbsuspend = 1; + intr_mask.b.sessreqintr = 1; + dwc_write_reg32(&global_regs->gintmsk, intr_mask.d32); +} + +/** + * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY + * type. + */ +static void init_fslspclksel(dwc_otg_core_if_t *core_if) +{ + uint32_t val; + hcfg_data_t hcfg; + + if (((core_if->hwcfg2.b.hs_phy_type == 2) && + (core_if->hwcfg2.b.fs_phy_type == 1) && + (core_if->core_params->ulpi_fs_ls)) || + (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { + /* Full speed PHY */ + val = DWC_HCFG_48_MHZ; + } + else { + /* High speed PHY running at full speed or high speed */ + val = DWC_HCFG_30_60_MHZ; + } + + DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val); + hcfg.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hcfg); + hcfg.b.fslspclksel = val; + dwc_write_reg32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32); +} + +/** + * Initializes the DevSpd field of the DCFG register depending on the PHY type + * and the enumeration speed of the device. + */ +static void init_devspd(dwc_otg_core_if_t *core_if) +{ + uint32_t val; + dcfg_data_t dcfg; + + if (((core_if->hwcfg2.b.hs_phy_type == 2) && + (core_if->hwcfg2.b.fs_phy_type == 1) && + (core_if->core_params->ulpi_fs_ls)) || + (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { + /* Full speed PHY */ + val = 0x3; + } + else if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) { + /* High speed PHY running at full speed */ + val = 0x1; + } + else { + /* High speed PHY running at high speed */ + val = 0x0; + } + + DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val); + + dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg); + dcfg.b.devspd = val; + dwc_write_reg32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32); +} + +/** + * This function calculates the number of IN EPS + * using GHWCFG1 and GHWCFG2 registers values + * + * @param core_if Programming view of the DWC_otg controller + */ +static uint32_t calc_num_in_eps(dwc_otg_core_if_t *core_if) +{ + uint32_t num_in_eps = 0; + uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep; + uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 3; + uint32_t num_tx_fifos = core_if->hwcfg4.b.num_in_eps; + int i; + + + for(i = 0; i < num_eps; ++i) + { + if(!(hwcfg1 & 0x1)) + num_in_eps++; + + hwcfg1 >>= 2; + } + + if(core_if->hwcfg4.b.ded_fifo_en) { + num_in_eps = (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps; + } + + return num_in_eps; +} + + +/** + * This function calculates the number of OUT EPS + * using GHWCFG1 and GHWCFG2 registers values + * + * @param core_if Programming view of the DWC_otg controller + */ +static uint32_t calc_num_out_eps(dwc_otg_core_if_t *core_if) +{ + uint32_t num_out_eps = 0; + uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep; + uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 2; + int i; + + for(i = 0; i < num_eps; ++i) + { + if(!(hwcfg1 & 0x2)) + num_out_eps++; + + hwcfg1 >>= 2; + } + return num_out_eps; +} +/** + * This function initializes the DWC_otg controller registers and + * prepares the core for device mode or host mode operation. + * + * @param core_if Programming view of the DWC_otg controller + * + */ +void dwc_otg_core_init(dwc_otg_core_if_t *core_if) +{ + int i = 0; + dwc_otg_core_global_regs_t *global_regs = + core_if->core_global_regs; + dwc_otg_dev_if_t *dev_if = core_if->dev_if; + gahbcfg_data_t ahbcfg = { .d32 = 0 }; + gusbcfg_data_t usbcfg = { .d32 = 0 }; + gi2cctl_data_t i2cctl = { .d32 = 0 }; + + DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p)\n", core_if); + + /* Common Initialization */ + + usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); + +// usbcfg.b.tx_end_delay = 1; + /* Program the ULPI External VBUS bit if needed */ + usbcfg.b.ulpi_ext_vbus_drv = + (core_if->core_params->phy_ulpi_ext_vbus == DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0; + + /* Set external TS Dline pulsing */ + usbcfg.b.term_sel_dl_pulse = (core_if->core_params->ts_dline == 1) ? 1 : 0; + dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32); + + + /* Reset the Controller */ + dwc_otg_core_reset(core_if); + + /* Initialize parameters from Hardware configuration registers. */ + dev_if->num_in_eps = calc_num_in_eps(core_if); + dev_if->num_out_eps = calc_num_out_eps(core_if); + + + DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n", core_if->hwcfg4.b.num_dev_perio_in_ep); + + for (i=0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++) + { + dev_if->perio_tx_fifo_size[i] = + dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16; + DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n", + i, dev_if->perio_tx_fifo_size[i]); + } + + for (i=0; i < core_if->hwcfg4.b.num_in_eps; i++) + { + dev_if->tx_fifo_size[i] = + dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16; + DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n", + i, dev_if->perio_tx_fifo_size[i]); + } + + core_if->total_fifo_size = core_if->hwcfg3.b.dfifo_depth; + core_if->rx_fifo_size = + dwc_read_reg32(&global_regs->grxfsiz); + core_if->nperio_tx_fifo_size = + dwc_read_reg32(&global_regs->gnptxfsiz) >> 16; + + DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", core_if->total_fifo_size); + DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", core_if->rx_fifo_size); + DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n", core_if->nperio_tx_fifo_size); + + /* This programming sequence needs to happen in FS mode before any other + * programming occurs */ + if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) && + (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { + /* If FS mode with FS PHY */ + + /* core_init() is now called on every switch so only call the + * following for the first time through. */ + if (!core_if->phy_init_done) { + core_if->phy_init_done = 1; + DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n"); + usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); + usbcfg.b.physel = 1; + dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32); + + /* Reset after a PHY select */ + dwc_otg_core_reset(core_if); + } + + /* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also + * do this on HNP Dev/Host mode switches (done in dev_init and + * host_init). */ + if (dwc_otg_is_host_mode(core_if)) { + init_fslspclksel(core_if); + } + else { + init_devspd(core_if); + } + + if (core_if->core_params->i2c_enable) { + DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n"); + /* Program GUSBCFG.OtgUtmifsSel to I2C */ + usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); + usbcfg.b.otgutmifssel = 1; + dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32); + + /* Program GI2CCTL.I2CEn */ + i2cctl.d32 = dwc_read_reg32(&global_regs->gi2cctl); + i2cctl.b.i2cdevaddr = 1; + i2cctl.b.i2cen = 0; + dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32); + i2cctl.b.i2cen = 1; + dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32); + } + + } /* endif speed == DWC_SPEED_PARAM_FULL */ + + else { + /* High speed PHY. */ + if (!core_if->phy_init_done) { + core_if->phy_init_done = 1; + /* HS PHY parameters. These parameters are preserved + * during soft reset so only program the first time. Do + * a soft reset immediately after setting phyif. */ + usbcfg.b.ulpi_utmi_sel = core_if->core_params->phy_type; + if (usbcfg.b.ulpi_utmi_sel == 1) { + /* ULPI interface */ + usbcfg.b.phyif = 0; + usbcfg.b.ddrsel = core_if->core_params->phy_ulpi_ddr; + } + else { + /* UTMI+ interface */ + if (core_if->core_params->phy_utmi_width == 16) { + usbcfg.b.phyif = 1; + } + else { + usbcfg.b.phyif = 0; + } + } + + dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); + + /* Reset after setting the PHY parameters */ + dwc_otg_core_reset(core_if); + } + } + + if ((core_if->hwcfg2.b.hs_phy_type == 2) && + (core_if->hwcfg2.b.fs_phy_type == 1) && + (core_if->core_params->ulpi_fs_ls)) { + DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n"); + usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); + usbcfg.b.ulpi_fsls = 1; + usbcfg.b.ulpi_clk_sus_m = 1; + dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); + } + else { + usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); + usbcfg.b.ulpi_fsls = 0; + usbcfg.b.ulpi_clk_sus_m = 0; + dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); + } + + /* Program the GAHBCFG Register.*/ + switch (core_if->hwcfg2.b.architecture) { + + case DWC_SLAVE_ONLY_ARCH: + DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n"); + ahbcfg.b.nptxfemplvl_txfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY; + ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY; + core_if->dma_enable = 0; + core_if->dma_desc_enable = 0; + break; + + case DWC_EXT_DMA_ARCH: + DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n"); + ahbcfg.b.hburstlen = core_if->core_params->dma_burst_size; + core_if->dma_enable = (core_if->core_params->dma_enable != 0); + core_if->dma_desc_enable = (core_if->core_params->dma_desc_enable != 0); + break; + + case DWC_INT_DMA_ARCH: + DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n"); + ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR; + core_if->dma_enable = (core_if->core_params->dma_enable != 0); + core_if->dma_desc_enable = (core_if->core_params->dma_desc_enable != 0); + break; + + } + ahbcfg.b.dmaenable = core_if->dma_enable; + dwc_write_reg32(&global_regs->gahbcfg, ahbcfg.d32); + + core_if->en_multiple_tx_fifo = core_if->hwcfg4.b.ded_fifo_en; + + core_if->pti_enh_enable = core_if->core_params->pti_enable != 0; + core_if->multiproc_int_enable = core_if->core_params->mpi_enable; + DWC_PRINT("Periodic Transfer Interrupt Enhancement - %s\n", ((core_if->pti_enh_enable) ? "enabled": "disabled")); + DWC_PRINT("Multiprocessor Interrupt Enhancement - %s\n", ((core_if->multiproc_int_enable) ? "enabled": "disabled")); + + /* + * Program the GUSBCFG register. + */ + usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); + + switch (core_if->hwcfg2.b.op_mode) { + case DWC_MODE_HNP_SRP_CAPABLE: + usbcfg.b.hnpcap = (core_if->core_params->otg_cap == + DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE); + usbcfg.b.srpcap = (core_if->core_params->otg_cap != + DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); + break; + + case DWC_MODE_SRP_ONLY_CAPABLE: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = (core_if->core_params->otg_cap != + DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); + break; + + case DWC_MODE_NO_HNP_SRP_CAPABLE: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = 0; + break; + + case DWC_MODE_SRP_CAPABLE_DEVICE: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = (core_if->core_params->otg_cap != + DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); + break; + + case DWC_MODE_NO_SRP_CAPABLE_DEVICE: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = 0; + break; + + case DWC_MODE_SRP_CAPABLE_HOST: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = (core_if->core_params->otg_cap != + DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); + break; + + case DWC_MODE_NO_SRP_CAPABLE_HOST: + usbcfg.b.hnpcap = 0; + usbcfg.b.srpcap = 0; + break; + } + + dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); + + /* Enable common interrupts */ + dwc_otg_enable_common_interrupts(core_if); + + /* Do device or host intialization based on mode during PCD + * and HCD initialization */ + if (dwc_otg_is_host_mode(core_if)) { + DWC_DEBUGPL(DBG_ANY, "Host Mode\n"); + core_if->op_state = A_HOST; + } + else { + DWC_DEBUGPL(DBG_ANY, "Device Mode\n"); + core_if->op_state = B_PERIPHERAL; +#ifdef DWC_DEVICE_ONLY + dwc_otg_core_dev_init(core_if); +#endif + } +} + + +/** + * This function enables the Device mode interrupts. + * + * @param core_if Programming view of DWC_otg controller + */ +void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *core_if) +{ + gintmsk_data_t intr_mask = { .d32 = 0}; + dwc_otg_core_global_regs_t *global_regs = + core_if->core_global_regs; + + DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__); + + /* Disable all interrupts. */ + dwc_write_reg32(&global_regs->gintmsk, 0); + + /* Clear any pending interrupts */ + dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF); + + /* Enable the common interrupts */ + dwc_otg_enable_common_interrupts(core_if); + + /* Enable interrupts */ + intr_mask.b.usbreset = 1; + intr_mask.b.enumdone = 1; + + if(!core_if->multiproc_int_enable) { + intr_mask.b.inepintr = 1; + intr_mask.b.outepintr = 1; + } + + intr_mask.b.erlysuspend = 1; + + if(core_if->en_multiple_tx_fifo == 0) { + intr_mask.b.epmismatch = 1; + } + + +#ifdef DWC_EN_ISOC + if(core_if->dma_enable) { + if(core_if->dma_desc_enable == 0) { + if(core_if->pti_enh_enable) { + dctl_data_t dctl = { .d32 = 0 }; + dctl.b.ifrmnum = 1; + dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); + } else { + intr_mask.b.incomplisoin = 1; + intr_mask.b.incomplisoout = 1; + } + } + } else { + intr_mask.b.incomplisoin = 1; + intr_mask.b.incomplisoout = 1; + } +#endif // DWC_EN_ISOC + +/** @todo NGS: Should this be a module parameter? */ +#ifdef USE_PERIODIC_EP + intr_mask.b.isooutdrop = 1; + intr_mask.b.eopframe = 1; + intr_mask.b.incomplisoin = 1; + intr_mask.b.incomplisoout = 1; +#endif + + dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32); + + DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__, + dwc_read_reg32(&global_regs->gintmsk)); +} + +/** + * This function initializes the DWC_otg controller registers for + * device mode. + * + * @param core_if Programming view of DWC_otg controller + * + */ +void dwc_otg_core_dev_init(dwc_otg_core_if_t *core_if) +{ + int i; + dwc_otg_core_global_regs_t *global_regs = + core_if->core_global_regs; + dwc_otg_dev_if_t *dev_if = core_if->dev_if; + dwc_otg_core_params_t *params = core_if->core_params; + dcfg_data_t dcfg = { .d32 = 0}; + grstctl_t resetctl = { .d32 = 0 }; + uint32_t rx_fifo_size; + fifosize_data_t nptxfifosize; + fifosize_data_t txfifosize; + dthrctl_data_t dthrctl; + fifosize_data_t ptxfifosize; + + /* Restart the Phy Clock */ + dwc_write_reg32(core_if->pcgcctl, 0); + + /* Device configuration register */ + init_devspd(core_if); + dcfg.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dcfg); + dcfg.b.descdma = (core_if->dma_desc_enable) ? 1 : 0; + dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80; + + dwc_write_reg32(&dev_if->dev_global_regs->dcfg, dcfg.d32); + + /* Configure data FIFO sizes */ + if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) { + DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", core_if->total_fifo_size); + DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", params->dev_rx_fifo_size); + DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", params->dev_nperio_tx_fifo_size); + + /* Rx FIFO */ + DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n", + dwc_read_reg32(&global_regs->grxfsiz)); + + rx_fifo_size = params->dev_rx_fifo_size; + dwc_write_reg32(&global_regs->grxfsiz, rx_fifo_size); + + DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n", + dwc_read_reg32(&global_regs->grxfsiz)); + + /** Set Periodic Tx FIFO Mask all bits 0 */ + core_if->p_tx_msk = 0; + + /** Set Tx FIFO Mask all bits 0 */ + core_if->tx_msk = 0; + + if(core_if->en_multiple_tx_fifo == 0) { + /* Non-periodic Tx FIFO */ + DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", + dwc_read_reg32(&global_regs->gnptxfsiz)); + + nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; + nptxfifosize.b.startaddr = params->dev_rx_fifo_size; + + dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32); + + DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", + dwc_read_reg32(&global_regs->gnptxfsiz)); + + /**@todo NGS: Fix Periodic FIFO Sizing! */ + /* + * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15. + * Indexes of the FIFO size module parameters in the + * dev_perio_tx_fifo_size array and the FIFO size registers in + * the dptxfsiz array run from 0 to 14. + */ + /** @todo Finish debug of this */ + ptxfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth; + for (i=0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++) + { + ptxfifosize.b.depth = params->dev_perio_tx_fifo_size[i]; + DWC_DEBUGPL(DBG_CIL, "initial dptxfsiz_dieptxf[%d]=%08x\n", i, + dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i])); + dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i], + ptxfifosize.d32); + DWC_DEBUGPL(DBG_CIL, "new dptxfsiz_dieptxf[%d]=%08x\n", i, + dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i])); + ptxfifosize.b.startaddr += ptxfifosize.b.depth; + } + } + else { + /* + * Tx FIFOs These FIFOs are numbered from 1 to 15. + * Indexes of the FIFO size module parameters in the + * dev_tx_fifo_size array and the FIFO size registers in + * the dptxfsiz_dieptxf array run from 0 to 14. + */ + + + /* Non-periodic Tx FIFO */ + DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", + dwc_read_reg32(&global_regs->gnptxfsiz)); + + nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; + nptxfifosize.b.startaddr = params->dev_rx_fifo_size; + + dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32); + + DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", + dwc_read_reg32(&global_regs->gnptxfsiz)); + + txfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth; + /* + Modify by kaiker ,for RT3052 device mode config + + In RT3052,Since the _core_if->hwcfg4.b.num_dev_perio_in_ep is + configed to 0 so these TX_FIF0 not config.IN EP will can't + more than 1 if not modify it. + + */ +#if 1 + for (i=1 ; i <= dev_if->num_in_eps; i++) +#else + for (i=1; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++) +#endif + { + + txfifosize.b.depth = params->dev_tx_fifo_size[i]; + + DWC_DEBUGPL(DBG_CIL, "initial dptxfsiz_dieptxf[%d]=%08x\n", i, + dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i])); + + dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i-1], + txfifosize.d32); + + DWC_DEBUGPL(DBG_CIL, "new dptxfsiz_dieptxf[%d]=%08x\n", i, + dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i-1])); + + txfifosize.b.startaddr += txfifosize.b.depth; + } + } + } + /* Flush the FIFOs */ + dwc_otg_flush_tx_fifo(core_if, 0x10); /* all Tx FIFOs */ + dwc_otg_flush_rx_fifo(core_if); + + /* Flush the Learning Queue. */ + resetctl.b.intknqflsh = 1; + dwc_write_reg32(&core_if->core_global_regs->grstctl, resetctl.d32); + + /* Clear all pending Device Interrupts */ + + if(core_if->multiproc_int_enable) { + } + + /** @todo - if the condition needed to be checked + * or in any case all pending interrutps should be cleared? + */ + if(core_if->multiproc_int_enable) { + for(i = 0; i < core_if->dev_if->num_in_eps; ++i) { + dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[i], 0); + } + + for(i = 0; i < core_if->dev_if->num_out_eps; ++i) { + dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[i], 0); + } + + dwc_write_reg32(&dev_if->dev_global_regs->deachint, 0xFFFFFFFF); + dwc_write_reg32(&dev_if->dev_global_regs->deachintmsk, 0); + } else { + dwc_write_reg32(&dev_if->dev_global_regs->diepmsk, 0); + dwc_write_reg32(&dev_if->dev_global_regs->doepmsk, 0); + dwc_write_reg32(&dev_if->dev_global_regs->daint, 0xFFFFFFFF); + dwc_write_reg32(&dev_if->dev_global_regs->daintmsk, 0); + } + + for (i=0; i <= dev_if->num_in_eps; i++) + { + depctl_data_t depctl; + depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl); + if (depctl.b.epena) { + depctl.d32 = 0; + depctl.b.epdis = 1; + depctl.b.snak = 1; + } + else { + depctl.d32 = 0; + } + + dwc_write_reg32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32); + + + dwc_write_reg32(&dev_if->in_ep_regs[i]->dieptsiz, 0); + dwc_write_reg32(&dev_if->in_ep_regs[i]->diepdma, 0); + dwc_write_reg32(&dev_if->in_ep_regs[i]->diepint, 0xFF); + } + + for (i=0; i <= dev_if->num_out_eps; i++) + { + depctl_data_t depctl; + depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl); + if (depctl.b.epena) { + depctl.d32 = 0; + depctl.b.epdis = 1; + depctl.b.snak = 1; + } + else { + depctl.d32 = 0; + } + + dwc_write_reg32(&dev_if->out_ep_regs[i]->doepctl, depctl.d32); + + dwc_write_reg32(&dev_if->out_ep_regs[i]->doeptsiz, 0); + dwc_write_reg32(&dev_if->out_ep_regs[i]->doepdma, 0); + dwc_write_reg32(&dev_if->out_ep_regs[i]->doepint, 0xFF); + } + + if(core_if->en_multiple_tx_fifo && core_if->dma_enable) { + dev_if->non_iso_tx_thr_en = params->thr_ctl & 0x1; + dev_if->iso_tx_thr_en = (params->thr_ctl >> 1) & 0x1; + dev_if->rx_thr_en = (params->thr_ctl >> 2) & 0x1; + + dev_if->rx_thr_length = params->rx_thr_length; + dev_if->tx_thr_length = params->tx_thr_length; + + dev_if->setup_desc_index = 0; + + dthrctl.d32 = 0; + dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en; + dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en; + dthrctl.b.tx_thr_len = dev_if->tx_thr_length; + dthrctl.b.rx_thr_en = dev_if->rx_thr_en; + dthrctl.b.rx_thr_len = dev_if->rx_thr_length; + + dwc_write_reg32(&dev_if->dev_global_regs->dtknqr3_dthrctl, dthrctl.d32); + + DWC_DEBUGPL(DBG_CIL, "Non ISO Tx Thr - %d\nISO Tx Thr - %d\nRx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n", + dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en, dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len, dthrctl.b.rx_thr_len); + + } + + dwc_otg_enable_device_interrupts(core_if); + + { + diepmsk_data_t msk = { .d32 = 0 }; + msk.b.txfifoundrn = 1; + if(core_if->multiproc_int_enable) { + dwc_modify_reg32(&dev_if->dev_global_regs->diepeachintmsk[0], msk.d32, msk.d32); + } else { + dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, msk.d32, msk.d32); + } + } + + + if(core_if->multiproc_int_enable) { + /* Set NAK on Babble */ + dctl_data_t dctl = { .d32 = 0}; + dctl.b.nakonbble = 1; + dwc_modify_reg32(&dev_if->dev_global_regs->dctl, 0, dctl.d32); + } +} + +/** + * This function enables the Host mode interrupts. + * + * @param core_if Programming view of DWC_otg controller + */ +void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *core_if) +{ + dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; + gintmsk_data_t intr_mask = { .d32 = 0 }; + + DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__); + + /* Disable all interrupts. */ + dwc_write_reg32(&global_regs->gintmsk, 0); + + /* Clear any pending interrupts. */ + dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF); + + /* Enable the common interrupts */ + dwc_otg_enable_common_interrupts(core_if); + + /* + * Enable host mode interrupts without disturbing common + * interrupts. + */ + intr_mask.b.sofintr = 1; + intr_mask.b.portintr = 1; + intr_mask.b.hcintr = 1; + + dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32); +} + +/** + * This function disables the Host Mode interrupts. + * + * @param core_if Programming view of DWC_otg controller + */ +void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *core_if) +{ + dwc_otg_core_global_regs_t *global_regs = + core_if->core_global_regs; + gintmsk_data_t intr_mask = { .d32 = 0 }; + + DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__); + + /* + * Disable host mode interrupts without disturbing common + * interrupts. + */ + intr_mask.b.sofintr = 1; + intr_mask.b.portintr = 1; + intr_mask.b.hcintr = 1; + intr_mask.b.ptxfempty = 1; + intr_mask.b.nptxfempty = 1; + + dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0); +} + +/** + * This function initializes the DWC_otg controller registers for + * host mode. + * + * This function flushes the Tx and Rx FIFOs and it flushes any entries in the + * request queues. Host channels are reset to ensure that they are ready for + * performing transfers. + * + * @param core_if Programming view of DWC_otg controller + * + */ +void dwc_otg_core_host_init(dwc_otg_core_if_t *core_if) +{ + dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; + dwc_otg_host_if_t *host_if = core_if->host_if; + dwc_otg_core_params_t *params = core_if->core_params; + hprt0_data_t hprt0 = { .d32 = 0 }; + fifosize_data_t nptxfifosize; + fifosize_data_t ptxfifosize; + int i; + hcchar_data_t hcchar; + hcfg_data_t hcfg; + dwc_otg_hc_regs_t *hc_regs; + int num_channels; + gotgctl_data_t gotgctl = { .d32 = 0 }; + + DWC_DEBUGPL(DBG_CILV,"%s(%p)\n", __func__, core_if); + + /* Restart the Phy Clock */ + dwc_write_reg32(core_if->pcgcctl, 0); + + /* Initialize Host Configuration Register */ + init_fslspclksel(core_if); + if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) + { + hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg); + hcfg.b.fslssupp = 1; + dwc_write_reg32(&host_if->host_global_regs->hcfg, hcfg.d32); + } + + /* Configure data FIFO sizes */ + if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) { + DWC_DEBUGPL(DBG_CIL,"Total FIFO Size=%d\n", core_if->total_fifo_size); + DWC_DEBUGPL(DBG_CIL,"Rx FIFO Size=%d\n", params->host_rx_fifo_size); + DWC_DEBUGPL(DBG_CIL,"NP Tx FIFO Size=%d\n", params->host_nperio_tx_fifo_size); + DWC_DEBUGPL(DBG_CIL,"P Tx FIFO Size=%d\n", params->host_perio_tx_fifo_size); + + /* Rx FIFO */ + DWC_DEBUGPL(DBG_CIL,"initial grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz)); + dwc_write_reg32(&global_regs->grxfsiz, params->host_rx_fifo_size); + DWC_DEBUGPL(DBG_CIL,"new grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz)); + + /* Non-periodic Tx FIFO */ + DWC_DEBUGPL(DBG_CIL,"initial gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz)); + nptxfifosize.b.depth = params->host_nperio_tx_fifo_size; + nptxfifosize.b.startaddr = params->host_rx_fifo_size; + dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32); + DWC_DEBUGPL(DBG_CIL,"new gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz)); + + /* Periodic Tx FIFO */ + DWC_DEBUGPL(DBG_CIL,"initial hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz)); + ptxfifosize.b.depth = params->host_perio_tx_fifo_size; + ptxfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth; + dwc_write_reg32(&global_regs->hptxfsiz, ptxfifosize.d32); + DWC_DEBUGPL(DBG_CIL,"new hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz)); + } + + /* Clear Host Set HNP Enable in the OTG Control Register */ + gotgctl.b.hstsethnpen = 1; + dwc_modify_reg32(&global_regs->gotgctl, gotgctl.d32, 0); + + /* Make sure the FIFOs are flushed. */ + dwc_otg_flush_tx_fifo(core_if, 0x10 /* all Tx FIFOs */); + dwc_otg_flush_rx_fifo(core_if); + + /* Flush out any leftover queued requests. */ + num_channels = core_if->core_params->host_channels; + for (i = 0; i < num_channels; i++) + { + hc_regs = core_if->host_if->hc_regs[i]; + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.chen = 0; + hcchar.b.chdis = 1; + hcchar.b.epdir = 0; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + } + + /* Halt all channels to put them into a known state. */ + for (i = 0; i < num_channels; i++) + { + int count = 0; + hc_regs = core_if->host_if->hc_regs[i]; + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.chen = 1; + hcchar.b.chdis = 1; + hcchar.b.epdir = 0; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d\n", __func__, i); + do { + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (++count > 1000) + { + DWC_ERROR("%s: Unable to clear halt on channel %d\n", + __func__, i); + break; + } + } + while (hcchar.b.chen); + } + + /* Turn on the vbus power. */ + DWC_PRINT("Init: Port Power? op_state=%d\n", core_if->op_state); + if (core_if->op_state == A_HOST) { + hprt0.d32 = dwc_otg_read_hprt0(core_if); + DWC_PRINT("Init: Power Port (%d)\n", hprt0.b.prtpwr); + if (hprt0.b.prtpwr == 0) { + hprt0.b.prtpwr = 1; + dwc_write_reg32(host_if->hprt0, hprt0.d32); + } + } + + dwc_otg_enable_host_interrupts(core_if); +} + +/** + * Prepares a host channel for transferring packets to/from a specific + * endpoint. The HCCHARn register is set up with the characteristics specified + * in _hc. Host channel interrupts that may need to be serviced while this + * transfer is in progress are enabled. + * + * @param core_if Programming view of DWC_otg controller + * @param hc Information needed to initialize the host channel + */ +void dwc_otg_hc_init(dwc_otg_core_if_t *core_if, dwc_hc_t *hc) +{ + uint32_t intr_enable; + hcintmsk_data_t hc_intr_mask; + gintmsk_data_t gintmsk = { .d32 = 0 }; + hcchar_data_t hcchar; + hcsplt_data_t hcsplt; + + uint8_t hc_num = hc->hc_num; + dwc_otg_host_if_t *host_if = core_if->host_if; + dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num]; + + /* Clear old interrupt conditions for this host channel. */ + hc_intr_mask.d32 = 0xFFFFFFFF; + hc_intr_mask.b.reserved = 0; + dwc_write_reg32(&hc_regs->hcint, hc_intr_mask.d32); + + /* Enable channel interrupts required for this transfer. */ + hc_intr_mask.d32 = 0; + hc_intr_mask.b.chhltd = 1; + if (core_if->dma_enable) { + hc_intr_mask.b.ahberr = 1; + if (hc->error_state && !hc->do_split && + hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { + hc_intr_mask.b.ack = 1; + if (hc->ep_is_in) { + hc_intr_mask.b.datatglerr = 1; + if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) { + hc_intr_mask.b.nak = 1; + } + } + } + } + else { + switch (hc->ep_type) { + case DWC_OTG_EP_TYPE_CONTROL: + case DWC_OTG_EP_TYPE_BULK: + hc_intr_mask.b.xfercompl = 1; + hc_intr_mask.b.stall = 1; + hc_intr_mask.b.xacterr = 1; + hc_intr_mask.b.datatglerr = 1; + if (hc->ep_is_in) { + hc_intr_mask.b.bblerr = 1; + } + else { + hc_intr_mask.b.nak = 1; + hc_intr_mask.b.nyet = 1; + if (hc->do_ping) { + hc_intr_mask.b.ack = 1; + } + } + + if (hc->do_split) { + hc_intr_mask.b.nak = 1; + if (hc->complete_split) { + hc_intr_mask.b.nyet = 1; + } + else { + hc_intr_mask.b.ack = 1; + } + } + + if (hc->error_state) { + hc_intr_mask.b.ack = 1; + } + break; + case DWC_OTG_EP_TYPE_INTR: + hc_intr_mask.b.xfercompl = 1; + hc_intr_mask.b.nak = 1; + hc_intr_mask.b.stall = 1; + hc_intr_mask.b.xacterr = 1; + hc_intr_mask.b.datatglerr = 1; + hc_intr_mask.b.frmovrun = 1; + + if (hc->ep_is_in) { + hc_intr_mask.b.bblerr = 1; + } + if (hc->error_state) { + hc_intr_mask.b.ack = 1; + } + if (hc->do_split) { + if (hc->complete_split) { + hc_intr_mask.b.nyet = 1; + } + else { + hc_intr_mask.b.ack = 1; + } + } + break; + case DWC_OTG_EP_TYPE_ISOC: + hc_intr_mask.b.xfercompl = 1; + hc_intr_mask.b.frmovrun = 1; + hc_intr_mask.b.ack = 1; + + if (hc->ep_is_in) { + hc_intr_mask.b.xacterr = 1; + hc_intr_mask.b.bblerr = 1; + } + break; + } + } + dwc_write_reg32(&hc_regs->hcintmsk, hc_intr_mask.d32); + +// if(hc->ep_type == DWC_OTG_EP_TYPE_BULK && !hc->ep_is_in) +// hc->max_packet = 512; + /* Enable the top level host channel interrupt. */ + intr_enable = (1 << hc_num); + dwc_modify_reg32(&host_if->host_global_regs->haintmsk, 0, intr_enable); + + /* Make sure host channel interrupts are enabled. */ + gintmsk.b.hcintr = 1; + dwc_modify_reg32(&core_if->core_global_regs->gintmsk, 0, gintmsk.d32); + + /* + * Program the HCCHARn register with the endpoint characteristics for + * the current transfer. + */ + hcchar.d32 = 0; + hcchar.b.devaddr = hc->dev_addr; + hcchar.b.epnum = hc->ep_num; + hcchar.b.epdir = hc->ep_is_in; + hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW); + hcchar.b.eptype = hc->ep_type; + hcchar.b.mps = hc->max_packet; + + dwc_write_reg32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32); + + DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); + DWC_DEBUGPL(DBG_HCDV, " Dev Addr: %d\n", hcchar.b.devaddr); + DWC_DEBUGPL(DBG_HCDV, " Ep Num: %d\n", hcchar.b.epnum); + DWC_DEBUGPL(DBG_HCDV, " Is In: %d\n", hcchar.b.epdir); + DWC_DEBUGPL(DBG_HCDV, " Is Low Speed: %d\n", hcchar.b.lspddev); + DWC_DEBUGPL(DBG_HCDV, " Ep Type: %d\n", hcchar.b.eptype); + DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps); + DWC_DEBUGPL(DBG_HCDV, " Multi Cnt: %d\n", hcchar.b.multicnt); + + /* + * Program the HCSPLIT register for SPLITs + */ + hcsplt.d32 = 0; + if (hc->do_split) { + DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", hc->hc_num, + hc->complete_split ? "CSPLIT" : "SSPLIT"); + hcsplt.b.compsplt = hc->complete_split; + hcsplt.b.xactpos = hc->xact_pos; + hcsplt.b.hubaddr = hc->hub_addr; + hcsplt.b.prtaddr = hc->port_addr; + DWC_DEBUGPL(DBG_HCDV, " comp split %d\n", hc->complete_split); + DWC_DEBUGPL(DBG_HCDV, " xact pos %d\n", hc->xact_pos); + DWC_DEBUGPL(DBG_HCDV, " hub addr %d\n", hc->hub_addr); + DWC_DEBUGPL(DBG_HCDV, " port addr %d\n", hc->port_addr); + DWC_DEBUGPL(DBG_HCDV, " is_in %d\n", hc->ep_is_in); + DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps); + DWC_DEBUGPL(DBG_HCDV, " xferlen: %d\n", hc->xfer_len); + } + dwc_write_reg32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32); + +} + +/** + * Attempts to halt a host channel. This function should only be called in + * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under + * normal circumstances in DMA mode, the controller halts the channel when the + * transfer is complete or a condition occurs that requires application + * intervention. + * + * In slave mode, checks for a free request queue entry, then sets the Channel + * Enable and Channel Disable bits of the Host Channel Characteristics + * register of the specified channel to intiate the halt. If there is no free + * request queue entry, sets only the Channel Disable bit of the HCCHARn + * register to flush requests for this channel. In the latter case, sets a + * flag to indicate that the host channel needs to be halted when a request + * queue slot is open. + * + * In DMA mode, always sets the Channel Enable and Channel Disable bits of the + * HCCHARn register. The controller ensures there is space in the request + * queue before submitting the halt request. + * + * Some time may elapse before the core flushes any posted requests for this + * host channel and halts. The Channel Halted interrupt handler completes the + * deactivation of the host channel. + * + * @param core_if Controller register interface. + * @param hc Host channel to halt. + * @param halt_status Reason for halting the channel. + */ +void dwc_otg_hc_halt(dwc_otg_core_if_t *core_if, + dwc_hc_t *hc, + dwc_otg_halt_status_e halt_status) +{ + gnptxsts_data_t nptxsts; + hptxsts_data_t hptxsts; + hcchar_data_t hcchar; + dwc_otg_hc_regs_t *hc_regs; + dwc_otg_core_global_regs_t *global_regs; + dwc_otg_host_global_regs_t *host_global_regs; + + hc_regs = core_if->host_if->hc_regs[hc->hc_num]; + global_regs = core_if->core_global_regs; + host_global_regs = core_if->host_if->host_global_regs; + + WARN_ON(halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS); + + if (halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE || + halt_status == DWC_OTG_HC_XFER_AHB_ERR) { + /* + * Disable all channel interrupts except Ch Halted. The QTD + * and QH state associated with this transfer has been cleared + * (in the case of URB_DEQUEUE), so the channel needs to be + * shut down carefully to prevent crashes. + */ + hcintmsk_data_t hcintmsk; + hcintmsk.d32 = 0; + hcintmsk.b.chhltd = 1; + dwc_write_reg32(&hc_regs->hcintmsk, hcintmsk.d32); + + /* + * Make sure no other interrupts besides halt are currently + * pending. Handling another interrupt could cause a crash due + * to the QTD and QH state. + */ + dwc_write_reg32(&hc_regs->hcint, ~hcintmsk.d32); + + /* + * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR + * even if the channel was already halted for some other + * reason. + */ + hc->halt_status = halt_status; + + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chen == 0) { + /* + * The channel is either already halted or it hasn't + * started yet. In DMA mode, the transfer may halt if + * it finishes normally or a condition occurs that + * requires driver intervention. Don't want to halt + * the channel again. In either Slave or DMA mode, + * it's possible that the transfer has been assigned + * to a channel, but not started yet when an URB is + * dequeued. Don't want to halt a channel that hasn't + * started yet. + */ + return; + } + } + + if (hc->halt_pending) { + /* + * A halt has already been issued for this channel. This might + * happen when a transfer is aborted by a higher level in + * the stack. + */ +#ifdef DEBUG + DWC_PRINT("*** %s: Channel %d, _hc->halt_pending already set ***\n", + __func__, hc->hc_num); + +/* dwc_otg_dump_global_registers(core_if); */ +/* dwc_otg_dump_host_registers(core_if); */ +#endif + return; + } + + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.chen = 1; + hcchar.b.chdis = 1; + + if (!core_if->dma_enable) { + /* Check for space in the request queue to issue the halt. */ + if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || + hc->ep_type == DWC_OTG_EP_TYPE_BULK) { + nptxsts.d32 = dwc_read_reg32(&global_regs->gnptxsts); + if (nptxsts.b.nptxqspcavail == 0) { + hcchar.b.chen = 0; + } + } + else { + hptxsts.d32 = dwc_read_reg32(&host_global_regs->hptxsts); + if ((hptxsts.b.ptxqspcavail == 0) || (core_if->queuing_high_bandwidth)) { + hcchar.b.chen = 0; + } + } + } + + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + + hc->halt_status = halt_status; + + if (hcchar.b.chen) { + hc->halt_pending = 1; + hc->halt_on_queue = 0; + } + else { + hc->halt_on_queue = 1; + } + + DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); + DWC_DEBUGPL(DBG_HCDV, " hcchar: 0x%08x\n", hcchar.d32); + DWC_DEBUGPL(DBG_HCDV, " halt_pending: %d\n", hc->halt_pending); + DWC_DEBUGPL(DBG_HCDV, " halt_on_queue: %d\n", hc->halt_on_queue); + DWC_DEBUGPL(DBG_HCDV, " halt_status: %d\n", hc->halt_status); + + return; +} + +/** + * Clears the transfer state for a host channel. This function is normally + * called after a transfer is done and the host channel is being released. + * + * @param core_if Programming view of DWC_otg controller. + * @param hc Identifies the host channel to clean up. + */ +void dwc_otg_hc_cleanup(dwc_otg_core_if_t *core_if, dwc_hc_t *hc) +{ + dwc_otg_hc_regs_t *hc_regs; + + hc->xfer_started = 0; + + /* + * Clear channel interrupt enables and any unhandled channel interrupt + * conditions. + */ + hc_regs = core_if->host_if->hc_regs[hc->hc_num]; + dwc_write_reg32(&hc_regs->hcintmsk, 0); + dwc_write_reg32(&hc_regs->hcint, 0xFFFFFFFF); + +#ifdef DEBUG + del_timer(&core_if->hc_xfer_timer[hc->hc_num]); + { + hcchar_data_t hcchar; + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chdis) { + DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", + __func__, hc->hc_num, hcchar.d32); + } + } +#endif +} + +/** + * Sets the channel property that indicates in which frame a periodic transfer + * should occur. This is always set to the _next_ frame. This function has no + * effect on non-periodic transfers. + * + * @param core_if Programming view of DWC_otg controller. + * @param hc Identifies the host channel to set up and its properties. + * @param hcchar Current value of the HCCHAR register for the specified host + * channel. + */ +static inline void hc_set_even_odd_frame(dwc_otg_core_if_t *core_if, + dwc_hc_t *hc, + hcchar_data_t *hcchar) +{ + if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || + hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + hfnum_data_t hfnum; + hfnum.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hfnum); + + /* 1 if _next_ frame is odd, 0 if it's even */ + hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1; +#ifdef DEBUG + if (hc->ep_type == DWC_OTG_EP_TYPE_INTR && hc->do_split && !hc->complete_split) { + switch (hfnum.b.frnum & 0x7) { + case 7: + core_if->hfnum_7_samples++; + core_if->hfnum_7_frrem_accum += hfnum.b.frrem; + break; + case 0: + core_if->hfnum_0_samples++; + core_if->hfnum_0_frrem_accum += hfnum.b.frrem; + break; + default: + core_if->hfnum_other_samples++; + core_if->hfnum_other_frrem_accum += hfnum.b.frrem; + break; + } + } +#endif + } +} + +#ifdef DEBUG +static void hc_xfer_timeout(unsigned long ptr) +{ + hc_xfer_info_t *xfer_info = (hc_xfer_info_t *)ptr; + int hc_num = xfer_info->hc->hc_num; + DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num); + DWC_WARN(" start_hcchar_val 0x%08x\n", xfer_info->core_if->start_hcchar_val[hc_num]); +} +#endif + +/* + * This function does the setup for a data transfer for a host channel and + * starts the transfer. May be called in either Slave mode or DMA mode. In + * Slave mode, the caller must ensure that there is sufficient space in the + * request queue and Tx Data FIFO. + * + * For an OUT transfer in Slave mode, it loads a data packet into the + * appropriate FIFO. If necessary, additional data packets will be loaded in + * the Host ISR. + * + * For an IN transfer in Slave mode, a data packet is requested. The data + * packets are unloaded from the Rx FIFO in the Host ISR. If necessary, + * additional data packets are requested in the Host ISR. + * + * For a PING transfer in Slave mode, the Do Ping bit is set in the egards, + * + * Steven + * + * register along with a packet count of 1 and the channel is enabled. This + * causes a single PING transaction to occur. Other fields in HCTSIZ are + * simply set to 0 since no data transfer occurs in this case. + * + * For a PING transfer in DMA mode, the HCTSIZ register is initialized with + * all the information required to perform the subsequent data transfer. In + * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the + * controller performs the entire PING protocol, then starts the data + * transfer. + * + * @param core_if Programming view of DWC_otg controller. + * @param hc Information needed to initialize the host channel. The xfer_len + * value may be reduced to accommodate the max widths of the XferSize and + * PktCnt fields in the HCTSIZn register. The multi_count value may be changed + * to reflect the final xfer_len value. + */ +void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *core_if, dwc_hc_t *hc) +{ + hcchar_data_t hcchar; + hctsiz_data_t hctsiz; + uint16_t num_packets; + uint32_t max_hc_xfer_size = core_if->core_params->max_transfer_size; + uint16_t max_hc_pkt_count = core_if->core_params->max_packet_count; + dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num]; + + hctsiz.d32 = 0; + + if (hc->do_ping) { + if (!core_if->dma_enable) { + dwc_otg_hc_do_ping(core_if, hc); + hc->xfer_started = 1; + return; + } + else { + hctsiz.b.dopng = 1; + } + } + + if (hc->do_split) { + num_packets = 1; + + if (hc->complete_split && !hc->ep_is_in) { + /* For CSPLIT OUT Transfer, set the size to 0 so the + * core doesn't expect any data written to the FIFO */ + hc->xfer_len = 0; + } + else if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) { + hc->xfer_len = hc->max_packet; + } + else if (!hc->ep_is_in && (hc->xfer_len > 188)) { + hc->xfer_len = 188; + } + + hctsiz.b.xfersize = hc->xfer_len; + } + else { + /* + * Ensure that the transfer length and packet count will fit + * in the widths allocated for them in the HCTSIZn register. + */ + if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || + hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + /* + * Make sure the transfer size is no larger than one + * (micro)frame's worth of data. (A check was done + * when the periodic transfer was accepted to ensure + * that a (micro)frame's worth of data can be + * programmed into a channel.) + */ + uint32_t max_periodic_len = hc->multi_count * hc->max_packet; + if (hc->xfer_len > max_periodic_len) { + hc->xfer_len = max_periodic_len; + } + else { + } + + } + else if (hc->xfer_len > max_hc_xfer_size) { + /* Make sure that xfer_len is a multiple of max packet size. */ + hc->xfer_len = max_hc_xfer_size - hc->max_packet + 1; + } + + if (hc->xfer_len > 0) { + num_packets = (hc->xfer_len + hc->max_packet - 1) / hc->max_packet; + if (num_packets > max_hc_pkt_count) { + num_packets = max_hc_pkt_count; + hc->xfer_len = num_packets * hc->max_packet; + } + } + else { + /* Need 1 packet for transfer length of 0. */ + num_packets = 1; + } + + if (hc->ep_is_in) { + /* Always program an integral # of max packets for IN transfers. */ + hc->xfer_len = num_packets * hc->max_packet; + } + + if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || + hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + /* + * Make sure that the multi_count field matches the + * actual transfer length. + */ + hc->multi_count = num_packets; + } + + if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + /* Set up the initial PID for the transfer. */ + if (hc->speed == DWC_OTG_EP_SPEED_HIGH) { + if (hc->ep_is_in) { + if (hc->multi_count == 1) { + hc->data_pid_start = DWC_OTG_HC_PID_DATA0; + } + else if (hc->multi_count == 2) { + hc->data_pid_start = DWC_OTG_HC_PID_DATA1; + } + else { + hc->data_pid_start = DWC_OTG_HC_PID_DATA2; + } + } + else { + if (hc->multi_count == 1) { + hc->data_pid_start = DWC_OTG_HC_PID_DATA0; + } + else { + hc->data_pid_start = DWC_OTG_HC_PID_MDATA; + } + } + } + else { + hc->data_pid_start = DWC_OTG_HC_PID_DATA0; + } + } + + hctsiz.b.xfersize = hc->xfer_len; + } + + hc->start_pkt_count = num_packets; + hctsiz.b.pktcnt = num_packets; + hctsiz.b.pid = hc->data_pid_start; + dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); + + DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); + DWC_DEBUGPL(DBG_HCDV, " Xfer Size: %d\n", hctsiz.b.xfersize); + DWC_DEBUGPL(DBG_HCDV, " Num Pkts: %d\n", hctsiz.b.pktcnt); + DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid); + + if (core_if->dma_enable) { +#if defined (CONFIG_DWC_OTG_HOST_ONLY) + if ((uint32_t)hc->xfer_buff & 0x3) { + /* non DWORD-aligned buffer case*/ + if(!hc->qh->dw_align_buf) { + hc->qh->dw_align_buf = + dma_alloc_coherent(NULL, + core_if->core_params->max_transfer_size, + &hc->qh->dw_align_buf_dma, + GFP_ATOMIC | GFP_DMA); + if (!hc->qh->dw_align_buf) { + + DWC_ERROR("%s: Failed to allocate memory to handle " + "non-dword aligned buffer case\n", __func__); + return; + } + + } + if (!hc->ep_is_in) { + memcpy(hc->qh->dw_align_buf, phys_to_virt((uint32_t)hc->xfer_buff), hc->xfer_len); + } + + dwc_write_reg32(&hc_regs->hcdma, hc->qh->dw_align_buf_dma); + } + else +#endif + dwc_write_reg32(&hc_regs->hcdma, (uint32_t)hc->xfer_buff); + } + + /* Start the split */ + if (hc->do_split) { + hcsplt_data_t hcsplt; + hcsplt.d32 = dwc_read_reg32 (&hc_regs->hcsplt); + hcsplt.b.spltena = 1; + dwc_write_reg32(&hc_regs->hcsplt, hcsplt.d32); + } + + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.multicnt = hc->multi_count; + hc_set_even_odd_frame(core_if, hc, &hcchar); +#ifdef DEBUG + core_if->start_hcchar_val[hc->hc_num] = hcchar.d32; + if (hcchar.b.chdis) { + DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", + __func__, hc->hc_num, hcchar.d32); + } +#endif + + /* Set host channel enable after all other setup is complete. */ + hcchar.b.chen = 1; + hcchar.b.chdis = 0; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + + hc->xfer_started = 1; + hc->requests++; + + if (!core_if->dma_enable && + !hc->ep_is_in && hc->xfer_len > 0) { + /* Load OUT packet into the appropriate Tx FIFO. */ + dwc_otg_hc_write_packet(core_if, hc); + } + +#ifdef DEBUG + /* Start a timer for this transfer. */ + core_if->hc_xfer_timer[hc->hc_num].function = hc_xfer_timeout; + core_if->hc_xfer_info[hc->hc_num].core_if = core_if; + core_if->hc_xfer_info[hc->hc_num].hc = hc; + core_if->hc_xfer_timer[hc->hc_num].data = (unsigned long)(&core_if->hc_xfer_info[hc->hc_num]); + core_if->hc_xfer_timer[hc->hc_num].expires = jiffies + (HZ*10); + add_timer(&core_if->hc_xfer_timer[hc->hc_num]); +#endif +} + +/** + * This function continues a data transfer that was started by previous call + * to <code>dwc_otg_hc_start_transfer</code>. The caller must ensure there is + * sufficient space in the request queue and Tx Data FIFO. This function + * should only be called in Slave mode. In DMA mode, the controller acts + * autonomously to complete transfers programmed to a host channel. + * + * For an OUT transfer, a new data packet is loaded into the appropriate FIFO + * if there is any data remaining to be queued. For an IN transfer, another + * data packet is always requested. For the SETUP phase of a control transfer, + * this function does nothing. + * + * @return 1 if a new request is queued, 0 if no more requests are required + * for this transfer. + */ +int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *core_if, dwc_hc_t *hc) +{ + DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); + + if (hc->do_split) { + /* SPLITs always queue just once per channel */ + return 0; + } + else if (hc->data_pid_start == DWC_OTG_HC_PID_SETUP) { + /* SETUPs are queued only once since they can't be NAKed. */ + return 0; + } + else if (hc->ep_is_in) { + /* + * Always queue another request for other IN transfers. If + * back-to-back INs are issued and NAKs are received for both, + * the driver may still be processing the first NAK when the + * second NAK is received. When the interrupt handler clears + * the NAK interrupt for the first NAK, the second NAK will + * not be seen. So we can't depend on the NAK interrupt + * handler to requeue a NAKed request. Instead, IN requests + * are issued each time this function is called. When the + * transfer completes, the extra requests for the channel will + * be flushed. + */ + hcchar_data_t hcchar; + dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num]; + + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hc_set_even_odd_frame(core_if, hc, &hcchar); + hcchar.b.chen = 1; + hcchar.b.chdis = 0; + DWC_DEBUGPL(DBG_HCDV, " IN xfer: hcchar = 0x%08x\n", hcchar.d32); + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + hc->requests++; + return 1; + } + else { + /* OUT transfers. */ + if (hc->xfer_count < hc->xfer_len) { + if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || + hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + hcchar_data_t hcchar; + dwc_otg_hc_regs_t *hc_regs; + hc_regs = core_if->host_if->hc_regs[hc->hc_num]; + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hc_set_even_odd_frame(core_if, hc, &hcchar); + } + + /* Load OUT packet into the appropriate Tx FIFO. */ + dwc_otg_hc_write_packet(core_if, hc); + hc->requests++; + return 1; + } + else { + return 0; + } + } +} + +/** + * Starts a PING transfer. This function should only be called in Slave mode. + * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled. + */ +void dwc_otg_hc_do_ping(dwc_otg_core_if_t *core_if, dwc_hc_t *hc) +{ + hcchar_data_t hcchar; + hctsiz_data_t hctsiz; + dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num]; + + DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); + + hctsiz.d32 = 0; + hctsiz.b.dopng = 1; + hctsiz.b.pktcnt = 1; + dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); + + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.chen = 1; + hcchar.b.chdis = 0; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); +} + +/* + * This function writes a packet into the Tx FIFO associated with the Host + * Channel. For a channel associated with a non-periodic EP, the non-periodic + * Tx FIFO is written. For a channel associated with a periodic EP, the + * periodic Tx FIFO is written. This function should only be called in Slave + * mode. + * + * Upon return the xfer_buff and xfer_count fields in _hc are incremented by + * then number of bytes written to the Tx FIFO. + */ +void dwc_otg_hc_write_packet(dwc_otg_core_if_t *core_if, dwc_hc_t *hc) +{ + uint32_t i; + uint32_t remaining_count; + uint32_t byte_count; + uint32_t dword_count; + + uint32_t *data_buff = (uint32_t *)(hc->xfer_buff); + uint32_t *data_fifo = core_if->data_fifo[hc->hc_num]; + + remaining_count = hc->xfer_len - hc->xfer_count; + if (remaining_count > hc->max_packet) { + byte_count = hc->max_packet; + } + else { + byte_count = remaining_count; + } + + dword_count = (byte_count + 3) / 4; + + if ((((unsigned long)data_buff) & 0x3) == 0) { + /* xfer_buff is DWORD aligned. */ + for (i = 0; i < dword_count; i++, data_buff++) + { + dwc_write_reg32(data_fifo, *data_buff); + } + } + else { + /* xfer_buff is not DWORD aligned. */ + for (i = 0; i < dword_count; i++, data_buff++) + { + dwc_write_reg32(data_fifo, get_unaligned(data_buff)); + } + } + + hc->xfer_count += byte_count; + hc->xfer_buff += byte_count; +} + +/** + * Gets the current USB frame number. This is the frame number from the last + * SOF packet. + */ +uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *core_if) +{ + dsts_data_t dsts; + dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts); + + /* read current frame/microframe number from DSTS register */ + return dsts.b.soffn; +} + +/** + * This function reads a setup packet from the Rx FIFO into the destination + * buffer. This function is called from the Rx Status Queue Level (RxStsQLvl) + * Interrupt routine when a SETUP packet has been received in Slave mode. + * + * @param core_if Programming view of DWC_otg controller. + * @param dest Destination buffer for packet data. + */ +void dwc_otg_read_setup_packet(dwc_otg_core_if_t *core_if, uint32_t *dest) +{ + /* Get the 8 bytes of a setup transaction data */ + + /* Pop 2 DWORDS off the receive data FIFO into memory */ + dest[0] = dwc_read_reg32(core_if->data_fifo[0]); + dest[1] = dwc_read_reg32(core_if->data_fifo[0]); +} + + +/** + * This function enables EP0 OUT to receive SETUP packets and configures EP0 + * IN for transmitting packets. It is normally called when the + * "Enumeration Done" interrupt occurs. + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP0 data. + */ +void dwc_otg_ep0_activate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) +{ + dwc_otg_dev_if_t *dev_if = core_if->dev_if; + dsts_data_t dsts; + depctl_data_t diepctl; + depctl_data_t doepctl; + dctl_data_t dctl = { .d32 = 0 }; + + /* Read the Device Status and Endpoint 0 Control registers */ + dsts.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dsts); + diepctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl); + doepctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl); + + /* Set the MPS of the IN EP based on the enumeration speed */ + switch (dsts.b.enumspd) { + case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ: + case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ: + case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ: + diepctl.b.mps = DWC_DEP0CTL_MPS_64; + break; + case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ: + diepctl.b.mps = DWC_DEP0CTL_MPS_8; + break; + } + + dwc_write_reg32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32); + + /* Enable OUT EP for receive */ + doepctl.b.epena = 1; + dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32); + +#ifdef VERBOSE + DWC_DEBUGPL(DBG_PCDV,"doepctl0=%0x\n", + dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl)); + DWC_DEBUGPL(DBG_PCDV,"diepctl0=%0x\n", + dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl)); +#endif + dctl.b.cgnpinnak = 1; + + dwc_modify_reg32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); + DWC_DEBUGPL(DBG_PCDV,"dctl=%0x\n", + dwc_read_reg32(&dev_if->dev_global_regs->dctl)); +} + +/** + * This function activates an EP. The Device EP control register for + * the EP is configured as defined in the ep structure. Note: This + * function is not used for EP0. + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to activate. + */ +void dwc_otg_ep_activate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) +{ + dwc_otg_dev_if_t *dev_if = core_if->dev_if; + depctl_data_t depctl; + volatile uint32_t *addr; + daint_data_t daintmsk = { .d32 = 0 }; + + DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, ep->num, + (ep->is_in?"IN":"OUT")); + + /* Read DEPCTLn register */ + if (ep->is_in == 1) { + addr = &dev_if->in_ep_regs[ep->num]->diepctl; + daintmsk.ep.in = 1<<ep->num; + } + else { + addr = &dev_if->out_ep_regs[ep->num]->doepctl; + daintmsk.ep.out = 1<<ep->num; + } + + /* If the EP is already active don't change the EP Control + * register. */ + depctl.d32 = dwc_read_reg32(addr); + if (!depctl.b.usbactep) { + depctl.b.mps = ep->maxpacket; + depctl.b.eptype = ep->type; + depctl.b.txfnum = ep->tx_fifo_num; + + if (ep->type == DWC_OTG_EP_TYPE_ISOC) { + depctl.b.setd0pid = 1; // ??? + } + else { + depctl.b.setd0pid = 1; + } + depctl.b.usbactep = 1; + + dwc_write_reg32(addr, depctl.d32); + DWC_DEBUGPL(DBG_PCDV,"DEPCTL=%08x\n", dwc_read_reg32(addr)); + } + + /* Enable the Interrupt for this EP */ + if(core_if->multiproc_int_enable) { + if (ep->is_in == 1) { + diepmsk_data_t diepmsk = { .d32 = 0}; + diepmsk.b.xfercompl = 1; + diepmsk.b.timeout = 1; + diepmsk.b.epdisabled = 1; + diepmsk.b.ahberr = 1; + diepmsk.b.intknepmis = 1; + diepmsk.b.txfifoundrn = 1; //????? + + + if(core_if->dma_desc_enable) { + diepmsk.b.bna = 1; + } +/* + if(core_if->dma_enable) { + doepmsk.b.nak = 1; + } +*/ + dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[ep->num], diepmsk.d32); + + } else { + doepmsk_data_t doepmsk = { .d32 = 0}; + doepmsk.b.xfercompl = 1; + doepmsk.b.ahberr = 1; + doepmsk.b.epdisabled = 1; + + + if(core_if->dma_desc_enable) { + doepmsk.b.bna = 1; + } +/* + doepmsk.b.babble = 1; + doepmsk.b.nyet = 1; + doepmsk.b.nak = 1; +*/ + dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[ep->num], doepmsk.d32); + } + dwc_modify_reg32(&dev_if->dev_global_regs->deachintmsk, + 0, daintmsk.d32); + } else { + dwc_modify_reg32(&dev_if->dev_global_regs->daintmsk, + 0, daintmsk.d32); + } + + DWC_DEBUGPL(DBG_PCDV,"DAINTMSK=%0x\n", + dwc_read_reg32(&dev_if->dev_global_regs->daintmsk)); + + ep->stall_clear_flag = 0; + return; +} + +/** + * This function deactivates an EP. This is done by clearing the USB Active + * EP bit in the Device EP control register. Note: This function is not used + * for EP0. EP0 cannot be deactivated. + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to deactivate. + */ +void dwc_otg_ep_deactivate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) +{ + depctl_data_t depctl = { .d32 = 0 }; + volatile uint32_t *addr; + daint_data_t daintmsk = { .d32 = 0}; + + /* Read DEPCTLn register */ + if (ep->is_in == 1) { + addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; + daintmsk.ep.in = 1<<ep->num; + } + else { + addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; + daintmsk.ep.out = 1<<ep->num; + } + + depctl.b.usbactep = 0; + + if(core_if->dma_desc_enable) + depctl.b.epdis = 1; + + dwc_write_reg32(addr, depctl.d32); + + /* Disable the Interrupt for this EP */ + if(core_if->multiproc_int_enable) { + dwc_modify_reg32(&core_if->dev_if->dev_global_regs->deachintmsk, + daintmsk.d32, 0); + + if (ep->is_in == 1) { + dwc_write_reg32(&core_if->dev_if->dev_global_regs->diepeachintmsk[ep->num], 0); + } else { + dwc_write_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[ep->num], 0); + } + } else { + dwc_modify_reg32(&core_if->dev_if->dev_global_regs->daintmsk, + daintmsk.d32, 0); + } +} + +/** + * This function does the setup for a data transfer for an EP and + * starts the transfer. For an IN transfer, the packets will be + * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers, + * the packets are unloaded from the Rx FIFO in the ISR. the ISR. + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to start the transfer on. + */ +static void init_dma_desc_chain(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) +{ + dwc_otg_dma_desc_t* dma_desc; + uint32_t offset; + uint32_t xfer_est; + int i; + + ep->desc_cnt = ( ep->total_len / ep->maxxfer) + + ((ep->total_len % ep->maxxfer) ? 1 : 0); + if(!ep->desc_cnt) + ep->desc_cnt = 1; + + dma_desc = ep->desc_addr; + xfer_est = ep->total_len; + offset = 0; + for( i = 0; i < ep->desc_cnt; ++i) { + /** DMA Descriptor Setup */ + if(xfer_est > ep->maxxfer) { + dma_desc->status.b.bs = BS_HOST_BUSY; + dma_desc->status.b.l = 0; + dma_desc->status.b.ioc = 0; + dma_desc->status.b.sp = 0; + dma_desc->status.b.bytes = ep->maxxfer; + dma_desc->buf = ep->dma_addr + offset; + dma_desc->status.b.bs = BS_HOST_READY; + + xfer_est -= ep->maxxfer; + offset += ep->maxxfer; + } else { + dma_desc->status.b.bs = BS_HOST_BUSY; + dma_desc->status.b.l = 1; + dma_desc->status.b.ioc = 1; + if(ep->is_in) { + dma_desc->status.b.sp = (xfer_est % ep->maxpacket) ? + 1 : ((ep->sent_zlp) ? 1 : 0); + dma_desc->status.b.bytes = xfer_est; + } else { + dma_desc->status.b.bytes = xfer_est + ((4 - (xfer_est & 0x3)) & 0x3) ; + } + + dma_desc->buf = ep->dma_addr + offset; + dma_desc->status.b.bs = BS_HOST_READY; + } + dma_desc ++; + } +} + +/** + * This function does the setup for a data transfer for an EP and + * starts the transfer. For an IN transfer, the packets will be + * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers, + * the packets are unloaded from the Rx FIFO in the ISR. the ISR. + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to start the transfer on. + */ + +void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) +{ + depctl_data_t depctl; + deptsiz_data_t deptsiz; + gintmsk_data_t intr_mask = { .d32 = 0}; + + DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__); + + DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d " + "xfer_buff=%p start_xfer_buff=%p\n", + ep->num, (ep->is_in?"IN":"OUT"), ep->xfer_len, + ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff); + + /* IN endpoint */ + if (ep->is_in == 1) { + dwc_otg_dev_in_ep_regs_t *in_regs = + core_if->dev_if->in_ep_regs[ep->num]; + + gnptxsts_data_t gtxstatus; + + gtxstatus.d32 = + dwc_read_reg32(&core_if->core_global_regs->gnptxsts); + + if(core_if->en_multiple_tx_fifo == 0 && gtxstatus.b.nptxqspcavail == 0) { +#ifdef DEBUG + DWC_PRINT("TX Queue Full (0x%0x)\n", gtxstatus.d32); +#endif + return; + } + + depctl.d32 = dwc_read_reg32(&(in_regs->diepctl)); + deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz)); + + ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ? + ep->maxxfer : (ep->total_len - ep->xfer_len); + + /* Zero Length Packet? */ + if ((ep->xfer_len - ep->xfer_count) == 0) { + deptsiz.b.xfersize = 0; + deptsiz.b.pktcnt = 1; + } + else { + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count; + deptsiz.b.pktcnt = + (ep->xfer_len - ep->xfer_count - 1 + ep->maxpacket) / + ep->maxpacket; + } + + + /* Write the DMA register */ + if (core_if->dma_enable) { + if (core_if->dma_desc_enable == 0) { + dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32); + dwc_write_reg32 (&(in_regs->diepdma), + (uint32_t)ep->dma_addr); + } + else { + init_dma_desc_chain(core_if, ep); + /** DIEPDMAn Register write */ + dwc_write_reg32(&in_regs->diepdma, ep->dma_desc_addr); + } + } + else { + dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32); + if(ep->type != DWC_OTG_EP_TYPE_ISOC) { + /** + * Enable the Non-Periodic Tx FIFO empty interrupt, + * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode, + * the data will be written into the fifo by the ISR. + */ + if(core_if->en_multiple_tx_fifo == 0) { + intr_mask.b.nptxfempty = 1; + dwc_modify_reg32(&core_if->core_global_regs->gintmsk, + intr_mask.d32, intr_mask.d32); + } + else { + /* Enable the Tx FIFO Empty Interrupt for this EP */ + if(ep->xfer_len > 0) { + uint32_t fifoemptymsk = 0; + fifoemptymsk = 1 << ep->num; + dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk, + 0, fifoemptymsk); + + } + } + } + } + + /* EP enable, IN data in FIFO */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + dwc_write_reg32(&in_regs->diepctl, depctl.d32); + + depctl.d32 = dwc_read_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl); + depctl.b.nextep = ep->num; + dwc_write_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32); + + } + else { + /* OUT endpoint */ + dwc_otg_dev_out_ep_regs_t *out_regs = + core_if->dev_if->out_ep_regs[ep->num]; + + depctl.d32 = dwc_read_reg32(&(out_regs->doepctl)); + deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz)); + + ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ? + ep->maxxfer : (ep->total_len - ep->xfer_len); + + /* Program the transfer size and packet count as follows: + * + * pktcnt = N + * xfersize = N * maxpacket + */ + if ((ep->xfer_len - ep->xfer_count) == 0) { + /* Zero Length Packet */ + deptsiz.b.xfersize = ep->maxpacket; + deptsiz.b.pktcnt = 1; + } + else { + deptsiz.b.pktcnt = + (ep->xfer_len - ep->xfer_count + (ep->maxpacket - 1)) / + ep->maxpacket; + ep->xfer_len = deptsiz.b.pktcnt * ep->maxpacket + ep->xfer_count; + deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count; + } + + DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n", + ep->num, + deptsiz.b.xfersize, deptsiz.b.pktcnt); + + if (core_if->dma_enable) { + if (!core_if->dma_desc_enable) { + dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32); + + dwc_write_reg32 (&(out_regs->doepdma), + (uint32_t)ep->dma_addr); + } + else { + init_dma_desc_chain(core_if, ep); + + /** DOEPDMAn Register write */ + dwc_write_reg32(&out_regs->doepdma, ep->dma_desc_addr); + } + } + else { + dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32); + } + + /* EP enable */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + + dwc_write_reg32(&out_regs->doepctl, depctl.d32); + + DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n", + dwc_read_reg32(&out_regs->doepctl), + dwc_read_reg32(&out_regs->doeptsiz)); + DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n", + dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk), + dwc_read_reg32(&core_if->core_global_regs->gintmsk)); + } +} + +/** + * This function setup a zero length transfer in Buffer DMA and + * Slave modes for usb requests with zero field set + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to start the transfer on. + * + */ +void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) +{ + + depctl_data_t depctl; + deptsiz_data_t deptsiz; + gintmsk_data_t intr_mask = { .d32 = 0}; + + DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__); + + /* IN endpoint */ + if (ep->is_in == 1) { + dwc_otg_dev_in_ep_regs_t *in_regs = + core_if->dev_if->in_ep_regs[ep->num]; + + depctl.d32 = dwc_read_reg32(&(in_regs->diepctl)); + deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz)); + + deptsiz.b.xfersize = 0; + deptsiz.b.pktcnt = 1; + + + /* Write the DMA register */ + if (core_if->dma_enable) { + if (core_if->dma_desc_enable == 0) { + dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32); + dwc_write_reg32 (&(in_regs->diepdma), + (uint32_t)ep->dma_addr); + } + } + else { + dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32); + /** + * Enable the Non-Periodic Tx FIFO empty interrupt, + * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode, + * the data will be written into the fifo by the ISR. + */ + if(core_if->en_multiple_tx_fifo == 0) { + intr_mask.b.nptxfempty = 1; + dwc_modify_reg32(&core_if->core_global_regs->gintmsk, + intr_mask.d32, intr_mask.d32); + } + else { + /* Enable the Tx FIFO Empty Interrupt for this EP */ + if(ep->xfer_len > 0) { + uint32_t fifoemptymsk = 0; + fifoemptymsk = 1 << ep->num; + dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk, + 0, fifoemptymsk); + } + } + } + + /* EP enable, IN data in FIFO */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + dwc_write_reg32(&in_regs->diepctl, depctl.d32); + + depctl.d32 = dwc_read_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl); + depctl.b.nextep = ep->num; + dwc_write_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32); + + } + else { + /* OUT endpoint */ + dwc_otg_dev_out_ep_regs_t *out_regs = + core_if->dev_if->out_ep_regs[ep->num]; + + depctl.d32 = dwc_read_reg32(&(out_regs->doepctl)); + deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz)); + + /* Zero Length Packet */ + deptsiz.b.xfersize = ep->maxpacket; + deptsiz.b.pktcnt = 1; + + if (core_if->dma_enable) { + if (!core_if->dma_desc_enable) { + dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32); + + dwc_write_reg32 (&(out_regs->doepdma), + (uint32_t)ep->dma_addr); + } + } + else { + dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32); + } + + /* EP enable */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + + dwc_write_reg32(&out_regs->doepctl, depctl.d32); + + } +} + +/** + * This function does the setup for a data transfer for EP0 and starts + * the transfer. For an IN transfer, the packets will be loaded into + * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are + * unloaded from the Rx FIFO in the ISR. + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP0 data. + */ +void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) +{ + depctl_data_t depctl; + deptsiz0_data_t deptsiz; + gintmsk_data_t intr_mask = { .d32 = 0}; + dwc_otg_dma_desc_t* dma_desc; + + DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d " + "xfer_buff=%p start_xfer_buff=%p \n", + ep->num, (ep->is_in?"IN":"OUT"), ep->xfer_len, + ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff); + + ep->total_len = ep->xfer_len; + + /* IN endpoint */ + if (ep->is_in == 1) { + dwc_otg_dev_in_ep_regs_t *in_regs = + core_if->dev_if->in_ep_regs[0]; + + gnptxsts_data_t gtxstatus; + + gtxstatus.d32 = + dwc_read_reg32(&core_if->core_global_regs->gnptxsts); + + if(core_if->en_multiple_tx_fifo == 0 && gtxstatus.b.nptxqspcavail == 0) { +#ifdef DEBUG + deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz); + DWC_DEBUGPL(DBG_PCD,"DIEPCTL0=%0x\n", + dwc_read_reg32(&in_regs->diepctl)); + DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n", + deptsiz.d32, + deptsiz.b.xfersize, deptsiz.b.pktcnt); + DWC_PRINT("TX Queue or FIFO Full (0x%0x)\n", + gtxstatus.d32); +#endif + return; + } + + + depctl.d32 = dwc_read_reg32(&in_regs->diepctl); + deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz); + + /* Zero Length Packet? */ + if (ep->xfer_len == 0) { + deptsiz.b.xfersize = 0; + deptsiz.b.pktcnt = 1; + } + else { + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + if (ep->xfer_len > ep->maxpacket) { + ep->xfer_len = ep->maxpacket; + deptsiz.b.xfersize = ep->maxpacket; + } + else { + deptsiz.b.xfersize = ep->xfer_len; + } + deptsiz.b.pktcnt = 1; + + } + DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", + ep->xfer_len, + deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32); + + /* Write the DMA register */ + if (core_if->dma_enable) { + if(core_if->dma_desc_enable == 0) { + dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32); + + dwc_write_reg32 (&(in_regs->diepdma), + (uint32_t)ep->dma_addr); + } + else { + dma_desc = core_if->dev_if->in_desc_addr; + + /** DMA Descriptor Setup */ + dma_desc->status.b.bs = BS_HOST_BUSY; + dma_desc->status.b.l = 1; + dma_desc->status.b.ioc = 1; + dma_desc->status.b.sp = (ep->xfer_len == ep->maxpacket) ? 0 : 1; + dma_desc->status.b.bytes = ep->xfer_len; + dma_desc->buf = ep->dma_addr; + dma_desc->status.b.bs = BS_HOST_READY; + + /** DIEPDMA0 Register write */ + dwc_write_reg32(&in_regs->diepdma, core_if->dev_if->dma_in_desc_addr); + } + } + else { + dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32); + } + + /* EP enable, IN data in FIFO */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + dwc_write_reg32(&in_regs->diepctl, depctl.d32); + + /** + * Enable the Non-Periodic Tx FIFO empty interrupt, the + * data will be written into the fifo by the ISR. + */ + if (!core_if->dma_enable) { + if(core_if->en_multiple_tx_fifo == 0) { + intr_mask.b.nptxfempty = 1; + dwc_modify_reg32(&core_if->core_global_regs->gintmsk, + intr_mask.d32, intr_mask.d32); + } + else { + /* Enable the Tx FIFO Empty Interrupt for this EP */ + if(ep->xfer_len > 0) { + uint32_t fifoemptymsk = 0; + fifoemptymsk |= 1 << ep->num; + dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk, + 0, fifoemptymsk); + } + } + } + } + else { + /* OUT endpoint */ + dwc_otg_dev_out_ep_regs_t *out_regs = + core_if->dev_if->out_ep_regs[0]; + + depctl.d32 = dwc_read_reg32(&out_regs->doepctl); + deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz); + + /* Program the transfer size and packet count as follows: + * xfersize = N * (maxpacket + 4 - (maxpacket % 4)) + * pktcnt = N */ + /* Zero Length Packet */ + deptsiz.b.xfersize = ep->maxpacket; + deptsiz.b.pktcnt = 1; + + DWC_DEBUGPL(DBG_PCDV, "len=%d xfersize=%d pktcnt=%d\n", + ep->xfer_len, + deptsiz.b.xfersize, deptsiz.b.pktcnt); + + if (core_if->dma_enable) { + if(!core_if->dma_desc_enable) { + dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32); + + dwc_write_reg32 (&(out_regs->doepdma), + (uint32_t)ep->dma_addr); + } + else { + dma_desc = core_if->dev_if->out_desc_addr; + + /** DMA Descriptor Setup */ + dma_desc->status.b.bs = BS_HOST_BUSY; + dma_desc->status.b.l = 1; + dma_desc->status.b.ioc = 1; + dma_desc->status.b.bytes = ep->maxpacket; + dma_desc->buf = ep->dma_addr; + dma_desc->status.b.bs = BS_HOST_READY; + + /** DOEPDMA0 Register write */ + dwc_write_reg32(&out_regs->doepdma, core_if->dev_if->dma_out_desc_addr); + } + } + else { + dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32); + } + + /* EP enable */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + dwc_write_reg32 (&(out_regs->doepctl), depctl.d32); + } +} + +/** + * This function continues control IN transfers started by + * dwc_otg_ep0_start_transfer, when the transfer does not fit in a + * single packet. NOTE: The DIEPCTL0/DOEPCTL0 registers only have one + * bit for the packet count. + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP0 data. + */ +void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) +{ + depctl_data_t depctl; + deptsiz0_data_t deptsiz; + gintmsk_data_t intr_mask = { .d32 = 0}; + dwc_otg_dma_desc_t* dma_desc; + + if (ep->is_in == 1) { + dwc_otg_dev_in_ep_regs_t *in_regs = + core_if->dev_if->in_ep_regs[0]; + gnptxsts_data_t tx_status = { .d32 = 0 }; + + tx_status.d32 = dwc_read_reg32(&core_if->core_global_regs->gnptxsts); + /** @todo Should there be check for room in the Tx + * Status Queue. If not remove the code above this comment. */ + + depctl.d32 = dwc_read_reg32(&in_regs->diepctl); + deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz); + + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + + + if(core_if->dma_desc_enable == 0) { + deptsiz.b.xfersize = (ep->total_len - ep->xfer_count) > ep->maxpacket ? ep->maxpacket : + (ep->total_len - ep->xfer_count); + deptsiz.b.pktcnt = 1; + if(core_if->dma_enable == 0) { + ep->xfer_len += deptsiz.b.xfersize; + } else { + ep->xfer_len = deptsiz.b.xfersize; + } + dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32); + } + else { + ep->xfer_len = (ep->total_len - ep->xfer_count) > ep->maxpacket ? ep->maxpacket : + (ep->total_len - ep->xfer_count); + + dma_desc = core_if->dev_if->in_desc_addr; + + /** DMA Descriptor Setup */ + dma_desc->status.b.bs = BS_HOST_BUSY; + dma_desc->status.b.l = 1; + dma_desc->status.b.ioc = 1; + dma_desc->status.b.sp = (ep->xfer_len == ep->maxpacket) ? 0 : 1; + dma_desc->status.b.bytes = ep->xfer_len; + dma_desc->buf = ep->dma_addr; + dma_desc->status.b.bs = BS_HOST_READY; + + /** DIEPDMA0 Register write */ + dwc_write_reg32(&in_regs->diepdma, core_if->dev_if->dma_in_desc_addr); + } + + + DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", + ep->xfer_len, + deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32); + + /* Write the DMA register */ + if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) { + if(core_if->dma_desc_enable == 0) + dwc_write_reg32 (&(in_regs->diepdma), (uint32_t)ep->dma_addr); + } + + /* EP enable, IN data in FIFO */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + dwc_write_reg32(&in_regs->diepctl, depctl.d32); + + /** + * Enable the Non-Periodic Tx FIFO empty interrupt, the + * data will be written into the fifo by the ISR. + */ + if (!core_if->dma_enable) { + if(core_if->en_multiple_tx_fifo == 0) { + /* First clear it from GINTSTS */ + intr_mask.b.nptxfempty = 1; + dwc_modify_reg32(&core_if->core_global_regs->gintmsk, + intr_mask.d32, intr_mask.d32); + + } + else { + /* Enable the Tx FIFO Empty Interrupt for this EP */ + if(ep->xfer_len > 0) { + uint32_t fifoemptymsk = 0; + fifoemptymsk |= 1 << ep->num; + dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk, + 0, fifoemptymsk); + } + } + } + } + else { + dwc_otg_dev_out_ep_regs_t *out_regs = + core_if->dev_if->out_ep_regs[0]; + + + depctl.d32 = dwc_read_reg32(&out_regs->doepctl); + deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz); + + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + deptsiz.b.xfersize = ep->maxpacket; + deptsiz.b.pktcnt = 1; + + + if(core_if->dma_desc_enable == 0) { + dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32); + } + else { + dma_desc = core_if->dev_if->out_desc_addr; + + /** DMA Descriptor Setup */ + dma_desc->status.b.bs = BS_HOST_BUSY; + dma_desc->status.b.l = 1; + dma_desc->status.b.ioc = 1; + dma_desc->status.b.bytes = ep->maxpacket; + dma_desc->buf = ep->dma_addr; + dma_desc->status.b.bs = BS_HOST_READY; + + /** DOEPDMA0 Register write */ + dwc_write_reg32(&out_regs->doepdma, core_if->dev_if->dma_out_desc_addr); + } + + + DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", + ep->xfer_len, + deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32); + + /* Write the DMA register */ + if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) { + if(core_if->dma_desc_enable == 0) + dwc_write_reg32 (&(out_regs->doepdma), (uint32_t)ep->dma_addr); + } + + /* EP enable, IN data in FIFO */ + depctl.b.cnak = 1; + depctl.b.epena = 1; + dwc_write_reg32(&out_regs->doepctl, depctl.d32); + + } +} + +#ifdef DEBUG +void dump_msg(const u8 *buf, unsigned int length) +{ + unsigned int start, num, i; + char line[52], *p; + + if (length >= 512) + return; + start = 0; + while (length > 0) { + num = min(length, 16u); + p = line; + for (i = 0; i < num; ++i) + { + if (i == 8) + *p++ = ' '; + sprintf(p, " %02x", buf[i]); + p += 3; + } + *p = 0; + DWC_PRINT("%6x: %s\n", start, line); + buf += num; + start += num; + length -= num; + } +} +#else +static inline void dump_msg(const u8 *buf, unsigned int length) +{ +} +#endif + +/** + * This function writes a packet into the Tx FIFO associated with the + * EP. For non-periodic EPs the non-periodic Tx FIFO is written. For + * periodic EPs the periodic Tx FIFO associated with the EP is written + * with all packets for the next micro-frame. + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to write packet for. + * @param dma Indicates if DMA is being used. + */ +void dwc_otg_ep_write_packet(dwc_otg_core_if_t *core_if, dwc_ep_t *ep, int dma) +{ + /** + * The buffer is padded to DWORD on a per packet basis in + * slave/dma mode if the MPS is not DWORD aligned. The last + * packet, if short, is also padded to a multiple of DWORD. + * + * ep->xfer_buff always starts DWORD aligned in memory and is a + * multiple of DWORD in length + * + * ep->xfer_len can be any number of bytes + * + * ep->xfer_count is a multiple of ep->maxpacket until the last + * packet + * + * FIFO access is DWORD */ + + uint32_t i; + uint32_t byte_count; + uint32_t dword_count; + uint32_t *fifo; + uint32_t *data_buff = (uint32_t *)ep->xfer_buff; + + DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, core_if, ep); + if (ep->xfer_count >= ep->xfer_len) { + DWC_WARN("%s() No data for EP%d!!!\n", __func__, ep->num); + return; + } + + /* Find the byte length of the packet either short packet or MPS */ + if ((ep->xfer_len - ep->xfer_count) < ep->maxpacket) { + byte_count = ep->xfer_len - ep->xfer_count; + } + else { + byte_count = ep->maxpacket; + } + + /* Find the DWORD length, padded by extra bytes as neccessary if MPS + * is not a multiple of DWORD */ + dword_count = (byte_count + 3) / 4; + +#ifdef VERBOSE + dump_msg(ep->xfer_buff, byte_count); +#endif + + /**@todo NGS Where are the Periodic Tx FIFO addresses + * intialized? What should this be? */ + + fifo = core_if->data_fifo[ep->num]; + + + DWC_DEBUGPL((DBG_PCDV|DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n", fifo, data_buff, *data_buff, byte_count); + + if (!dma) { + for (i=0; i<dword_count; i++, data_buff++) { + dwc_write_reg32(fifo, *data_buff); + } + } + + ep->xfer_count += byte_count; + ep->xfer_buff += byte_count; + ep->dma_addr += byte_count; +} + +/** + * Set the EP STALL. + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to set the stall on. + */ +void dwc_otg_ep_set_stall(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) +{ + depctl_data_t depctl; + volatile uint32_t *depctl_addr; + + DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num, + (ep->is_in?"IN":"OUT")); + + DWC_PRINT("%s ep%d-%s\n", __func__, ep->num, + (ep->is_in?"in":"out")); + + if (ep->is_in == 1) { + depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl); + depctl.d32 = dwc_read_reg32(depctl_addr); + + /* set the disable and stall bits */ + if (depctl.b.epena) { + depctl.b.epdis = 1; + } + depctl.b.stall = 1; + dwc_write_reg32(depctl_addr, depctl.d32); + } + else { + depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl); + depctl.d32 = dwc_read_reg32(depctl_addr); + + /* set the stall bit */ + depctl.b.stall = 1; + dwc_write_reg32(depctl_addr, depctl.d32); + } + + DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr)); + + return; +} + +/** + * Clear the EP STALL. + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to clear stall from. + */ +void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) +{ + depctl_data_t depctl; + volatile uint32_t *depctl_addr; + + DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num, + (ep->is_in?"IN":"OUT")); + + if (ep->is_in == 1) { + depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl); + } + else { + depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl); + } + + depctl.d32 = dwc_read_reg32(depctl_addr); + + /* clear the stall bits */ + depctl.b.stall = 0; + + /* + * USB Spec 9.4.5: For endpoints using data toggle, regardless + * of whether an endpoint has the Halt feature set, a + * ClearFeature(ENDPOINT_HALT) request always results in the + * data toggle being reinitialized to DATA0. + */ + if (ep->type == DWC_OTG_EP_TYPE_INTR || + ep->type == DWC_OTG_EP_TYPE_BULK) { + depctl.b.setd0pid = 1; /* DATA0 */ + } + + dwc_write_reg32(depctl_addr, depctl.d32); + DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr)); + return; +} + +/** + * This function reads a packet from the Rx FIFO into the destination + * buffer. To read SETUP data use dwc_otg_read_setup_packet. + * + * @param core_if Programming view of DWC_otg controller. + * @param dest Destination buffer for the packet. + * @param bytes Number of bytes to copy to the destination. + */ +void dwc_otg_read_packet(dwc_otg_core_if_t *core_if, + uint8_t *dest, + uint16_t bytes) +{ + int i; + int word_count = (bytes + 3) / 4; + + volatile uint32_t *fifo = core_if->data_fifo[0]; + uint32_t *data_buff = (uint32_t *)dest; + + /** + * @todo Account for the case where _dest is not dword aligned. This + * requires reading data from the FIFO into a uint32_t temp buffer, + * then moving it into the data buffer. + */ + + DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__, + core_if, dest, bytes); + + for (i=0; i<word_count; i++, data_buff++) + { + *data_buff = dwc_read_reg32(fifo); + } + + return; +} + + + +/** + * This functions reads the device registers and prints them + * + * @param core_if Programming view of DWC_otg controller. + */ +void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *core_if) +{ + int i; + volatile uint32_t *addr; + + DWC_PRINT("Device Global Registers\n"); + addr=&core_if->dev_if->dev_global_regs->dcfg; + DWC_PRINT("DCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->dev_if->dev_global_regs->dctl; + DWC_PRINT("DCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->dev_if->dev_global_regs->dsts; + DWC_PRINT("DSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->dev_if->dev_global_regs->diepmsk; + DWC_PRINT("DIEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->dev_if->dev_global_regs->doepmsk; + DWC_PRINT("DOEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->dev_if->dev_global_regs->daint; + DWC_PRINT("DAINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->dev_if->dev_global_regs->daintmsk; + DWC_PRINT("DAINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->dev_if->dev_global_regs->dtknqr1; + DWC_PRINT("DTKNQR1 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + if (core_if->hwcfg2.b.dev_token_q_depth > 6) { + addr=&core_if->dev_if->dev_global_regs->dtknqr2; + DWC_PRINT("DTKNQR2 @0x%08X : 0x%08X\n", + (uint32_t)addr,dwc_read_reg32(addr)); + } + + addr=&core_if->dev_if->dev_global_regs->dvbusdis; + DWC_PRINT("DVBUSID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + + addr=&core_if->dev_if->dev_global_regs->dvbuspulse; + DWC_PRINT("DVBUSPULSE @0x%08X : 0x%08X\n", + (uint32_t)addr,dwc_read_reg32(addr)); + + if (core_if->hwcfg2.b.dev_token_q_depth > 14) { + addr=&core_if->dev_if->dev_global_regs->dtknqr3_dthrctl; + DWC_PRINT("DTKNQR3_DTHRCTL @0x%08X : 0x%08X\n", + (uint32_t)addr, dwc_read_reg32(addr)); + } +/* + if (core_if->hwcfg2.b.dev_token_q_depth > 22) { + addr=&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk; + DWC_PRINT("DTKNQR4 @0x%08X : 0x%08X\n", + (uint32_t)addr, dwc_read_reg32(addr)); + } +*/ + addr=&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk; + DWC_PRINT("FIFOEMPMSK @0x%08X : 0x%08X\n", (uint32_t)addr, dwc_read_reg32(addr)); + + addr=&core_if->dev_if->dev_global_regs->deachint; + DWC_PRINT("DEACHINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->dev_if->dev_global_regs->deachintmsk; + DWC_PRINT("DEACHINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + + for (i=0; i<= core_if->dev_if->num_in_eps; i++) { + addr=&core_if->dev_if->dev_global_regs->diepeachintmsk[i]; + DWC_PRINT("DIEPEACHINTMSK[%d] @0x%08X : 0x%08X\n", i, (uint32_t)addr, dwc_read_reg32(addr)); + } + + + for (i=0; i<= core_if->dev_if->num_out_eps; i++) { + addr=&core_if->dev_if->dev_global_regs->doepeachintmsk[i]; + DWC_PRINT("DOEPEACHINTMSK[%d] @0x%08X : 0x%08X\n", i, (uint32_t)addr, dwc_read_reg32(addr)); + } + + for (i=0; i<= core_if->dev_if->num_in_eps; i++) { + DWC_PRINT("Device IN EP %d Registers\n", i); + addr=&core_if->dev_if->in_ep_regs[i]->diepctl; + DWC_PRINT("DIEPCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->dev_if->in_ep_regs[i]->diepint; + DWC_PRINT("DIEPINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->dev_if->in_ep_regs[i]->dieptsiz; + DWC_PRINT("DIETSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->dev_if->in_ep_regs[i]->diepdma; + DWC_PRINT("DIEPDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->dev_if->in_ep_regs[i]->dtxfsts; + DWC_PRINT("DTXFSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->dev_if->in_ep_regs[i]->diepdmab; + DWC_PRINT("DIEPDMAB @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + } + + + for (i=0; i<= core_if->dev_if->num_out_eps; i++) { + DWC_PRINT("Device OUT EP %d Registers\n", i); + addr=&core_if->dev_if->out_ep_regs[i]->doepctl; + DWC_PRINT("DOEPCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->dev_if->out_ep_regs[i]->doepfn; + DWC_PRINT("DOEPFN @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->dev_if->out_ep_regs[i]->doepint; + DWC_PRINT("DOEPINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->dev_if->out_ep_regs[i]->doeptsiz; + DWC_PRINT("DOETSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->dev_if->out_ep_regs[i]->doepdma; + DWC_PRINT("DOEPDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->dev_if->out_ep_regs[i]->doepdmab; + DWC_PRINT("DOEPDMAB @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + + } + + + + return; +} + +/** + * This functions reads the SPRAM and prints its content + * + * @param core_if Programming view of DWC_otg controller. + */ +void dwc_otg_dump_spram(dwc_otg_core_if_t *core_if) +{ + volatile uint8_t *addr, *start_addr, *end_addr; + + DWC_PRINT("SPRAM Data:\n"); + start_addr = (void*)core_if->core_global_regs; + DWC_PRINT("Base Address: 0x%8X\n", (uint32_t)start_addr); + start_addr += 0x00028000; + end_addr=(void*)core_if->core_global_regs; + end_addr += 0x000280e0; + + for(addr = start_addr; addr < end_addr; addr+=16) + { + DWC_PRINT("0x%8X:\t%2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X\n", (uint32_t)addr, + addr[0], + addr[1], + addr[2], + addr[3], + addr[4], + addr[5], + addr[6], + addr[7], + addr[8], + addr[9], + addr[10], + addr[11], + addr[12], + addr[13], + addr[14], + addr[15] + ); + } + + return; +} +/** + * This function reads the host registers and prints them + * + * @param core_if Programming view of DWC_otg controller. + */ +void dwc_otg_dump_host_registers(dwc_otg_core_if_t *core_if) +{ + int i; + volatile uint32_t *addr; + + DWC_PRINT("Host Global Registers\n"); + addr=&core_if->host_if->host_global_regs->hcfg; + DWC_PRINT("HCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->host_if->host_global_regs->hfir; + DWC_PRINT("HFIR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->host_if->host_global_regs->hfnum; + DWC_PRINT("HFNUM @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->host_if->host_global_regs->hptxsts; + DWC_PRINT("HPTXSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->host_if->host_global_regs->haint; + DWC_PRINT("HAINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->host_if->host_global_regs->haintmsk; + DWC_PRINT("HAINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=core_if->host_if->hprt0; + DWC_PRINT("HPRT0 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + + for (i=0; i<core_if->core_params->host_channels; i++) + { + DWC_PRINT("Host Channel %d Specific Registers\n", i); + addr=&core_if->host_if->hc_regs[i]->hcchar; + DWC_PRINT("HCCHAR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->host_if->hc_regs[i]->hcsplt; + DWC_PRINT("HCSPLT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->host_if->hc_regs[i]->hcint; + DWC_PRINT("HCINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->host_if->hc_regs[i]->hcintmsk; + DWC_PRINT("HCINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->host_if->hc_regs[i]->hctsiz; + DWC_PRINT("HCTSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->host_if->hc_regs[i]->hcdma; + DWC_PRINT("HCDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + } + return; +} + +/** + * This function reads the core global registers and prints them + * + * @param core_if Programming view of DWC_otg controller. + */ +void dwc_otg_dump_global_registers(dwc_otg_core_if_t *core_if) +{ + int i; + volatile uint32_t *addr; + + DWC_PRINT("Core Global Registers\n"); + addr=&core_if->core_global_regs->gotgctl; + DWC_PRINT("GOTGCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->core_global_regs->gotgint; + DWC_PRINT("GOTGINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->core_global_regs->gahbcfg; + DWC_PRINT("GAHBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->core_global_regs->gusbcfg; + DWC_PRINT("GUSBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->core_global_regs->grstctl; + DWC_PRINT("GRSTCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->core_global_regs->gintsts; + DWC_PRINT("GINTSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->core_global_regs->gintmsk; + DWC_PRINT("GINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->core_global_regs->grxstsr; + DWC_PRINT("GRXSTSR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + //addr=&core_if->core_global_regs->grxstsp; + //DWC_PRINT("GRXSTSP @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->core_global_regs->grxfsiz; + DWC_PRINT("GRXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->core_global_regs->gnptxfsiz; + DWC_PRINT("GNPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->core_global_regs->gnptxsts; + DWC_PRINT("GNPTXSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->core_global_regs->gi2cctl; + DWC_PRINT("GI2CCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->core_global_regs->gpvndctl; + DWC_PRINT("GPVNDCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->core_global_regs->ggpio; + DWC_PRINT("GGPIO @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->core_global_regs->guid; + DWC_PRINT("GUID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->core_global_regs->gsnpsid; + DWC_PRINT("GSNPSID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->core_global_regs->ghwcfg1; + DWC_PRINT("GHWCFG1 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->core_global_regs->ghwcfg2; + DWC_PRINT("GHWCFG2 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->core_global_regs->ghwcfg3; + DWC_PRINT("GHWCFG3 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->core_global_regs->ghwcfg4; + DWC_PRINT("GHWCFG4 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + addr=&core_if->core_global_regs->hptxfsiz; + DWC_PRINT("HPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); + + for (i=0; i<core_if->hwcfg4.b.num_dev_perio_in_ep; i++) + { + addr=&core_if->core_global_regs->dptxfsiz_dieptxf[i]; + DWC_PRINT("DPTXFSIZ[%d] @0x%08X : 0x%08X\n",i,(uint32_t)addr,dwc_read_reg32(addr)); + } +} + +/** + * Flush a Tx FIFO. + * + * @param core_if Programming view of DWC_otg controller. + * @param num Tx FIFO to flush. + */ +void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t *core_if, + const int num) +{ + dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; + volatile grstctl_t greset = { .d32 = 0}; + int count = 0; + + DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "Flush Tx FIFO %d\n", num); + + greset.b.txfflsh = 1; + greset.b.txfnum = num; + dwc_write_reg32(&global_regs->grstctl, greset.d32); + + do { + greset.d32 = dwc_read_reg32(&global_regs->grstctl); + if (++count > 10000) { + DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n", + __func__, greset.d32, + dwc_read_reg32(&global_regs->gnptxsts)); + break; + } + } + while (greset.b.txfflsh == 1); + + /* Wait for 3 PHY Clocks*/ + UDELAY(1); +} + +/** + * Flush Rx FIFO. + * + * @param core_if Programming view of DWC_otg controller. + */ +void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t *core_if) +{ + dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; + volatile grstctl_t greset = { .d32 = 0}; + int count = 0; + + DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "%s\n", __func__); + /* + * + */ + greset.b.rxfflsh = 1; + dwc_write_reg32(&global_regs->grstctl, greset.d32); + + do { + greset.d32 = dwc_read_reg32(&global_regs->grstctl); + if (++count > 10000) { + DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__, + greset.d32); + break; + } + } + while (greset.b.rxfflsh == 1); + + /* Wait for 3 PHY Clocks*/ + UDELAY(1); +} + +/** + * Do core a soft reset of the core. Be careful with this because it + * resets all the internal state machines of the core. + */ +void dwc_otg_core_reset(dwc_otg_core_if_t *core_if) +{ + dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; + volatile grstctl_t greset = { .d32 = 0}; + int count = 0; + + DWC_DEBUGPL(DBG_CILV, "%s\n", __func__); + /* Wait for AHB master IDLE state. */ + do { + UDELAY(10); + greset.d32 = dwc_read_reg32(&global_regs->grstctl); + if (++count > 100000) { + DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x\n", __func__, + greset.d32); + return; + } + } + while (greset.b.ahbidle == 0); + + /* Core Soft Reset */ + count = 0; + greset.b.csftrst = 1; + dwc_write_reg32(&global_regs->grstctl, greset.d32); + do { + greset.d32 = dwc_read_reg32(&global_regs->grstctl); + if (++count > 10000) { + DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", __func__, + greset.d32); + break; + } + } + while (greset.b.csftrst == 1); + + /* Wait for 3 PHY Clocks*/ + MDELAY(100); +} + + + +/** + * Register HCD callbacks. The callbacks are used to start and stop + * the HCD for interrupt processing. + * + * @param core_if Programming view of DWC_otg controller. + * @param cb the HCD callback structure. + * @param p pointer to be passed to callback function (usb_hcd*). + */ +void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t *core_if, + dwc_otg_cil_callbacks_t *cb, + void *p) +{ + core_if->hcd_cb = cb; + cb->p = p; +} + +/** + * Register PCD callbacks. The callbacks are used to start and stop + * the PCD for interrupt processing. + * + * @param core_if Programming view of DWC_otg controller. + * @param cb the PCD callback structure. + * @param p pointer to be passed to callback function (pcd*). + */ +void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t *core_if, + dwc_otg_cil_callbacks_t *cb, + void *p) +{ + core_if->pcd_cb = cb; + cb->p = p; +} + +#ifdef DWC_EN_ISOC + +/** + * This function writes isoc data per 1 (micro)frame into tx fifo + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to start the transfer on. + * + */ +void write_isoc_frame_data(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) +{ + dwc_otg_dev_in_ep_regs_t *ep_regs; + dtxfsts_data_t txstatus = {.d32 = 0}; + uint32_t len = 0; + uint32_t dwords; + + ep->xfer_len = ep->data_per_frame; + ep->xfer_count = 0; + + ep_regs = core_if->dev_if->in_ep_regs[ep->num]; + + len = ep->xfer_len - ep->xfer_count; + + if (len > ep->maxpacket) { + len = ep->maxpacket; + } + + dwords = (len + 3)/4; + + /* While there is space in the queue and space in the FIFO and + * More data to tranfer, Write packets to the Tx FIFO */ + txstatus.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts); + DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",ep->num,txstatus.d32); + + while (txstatus.b.txfspcavail > dwords && + ep->xfer_count < ep->xfer_len && + ep->xfer_len != 0) { + /* Write the FIFO */ + dwc_otg_ep_write_packet(core_if, ep, 0); + + len = ep->xfer_len - ep->xfer_count; + if (len > ep->maxpacket) { + len = ep->maxpacket; + } + + dwords = (len + 3)/4; + txstatus.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts); + DWC_DEBUGPL(DBG_PCDV,"dtxfsts[%d]=0x%08x\n", ep->num, txstatus.d32); + } +} + + +/** + * This function initializes a descriptor chain for Isochronous transfer + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to start the transfer on. + * + */ +void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) +{ + deptsiz_data_t deptsiz = { .d32 = 0 }; + depctl_data_t depctl = { .d32 = 0 }; + dsts_data_t dsts = { .d32 = 0 }; + volatile uint32_t *addr; + + if(ep->is_in) { + addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; + } else { + addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; + } + + ep->xfer_len = ep->data_per_frame; + ep->xfer_count = 0; + ep->xfer_buff = ep->cur_pkt_addr; + ep->dma_addr = ep->cur_pkt_dma_addr; + + if(ep->is_in) { + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + deptsiz.b.xfersize = ep->xfer_len; + deptsiz.b.pktcnt = + (ep->xfer_len - 1 + ep->maxpacket) / + ep->maxpacket; + deptsiz.b.mc = deptsiz.b.pktcnt; + dwc_write_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, deptsiz.d32); + + /* Write the DMA register */ + if (core_if->dma_enable) { + dwc_write_reg32 (&(core_if->dev_if->in_ep_regs[ep->num]->diepdma), (uint32_t)ep->dma_addr); + } + } else { + deptsiz.b.pktcnt = + (ep->xfer_len + (ep->maxpacket - 1)) / + ep->maxpacket; + deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket; + + dwc_write_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz, deptsiz.d32); + + if (core_if->dma_enable) { + dwc_write_reg32 (&(core_if->dev_if->out_ep_regs[ep->num]->doepdma), + (uint32_t)ep->dma_addr); + } + } + + + /** Enable endpoint, clear nak */ + + depctl.d32 = 0; + if(ep->bInterval == 1) { + dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts); + ep->next_frame = dsts.b.soffn + ep->bInterval; + + if(ep->next_frame & 0x1) { + depctl.b.setd1pid = 1; + } else { + depctl.b.setd0pid = 1; + } + } else { + ep->next_frame += ep->bInterval; + + if(ep->next_frame & 0x1) { + depctl.b.setd1pid = 1; + } else { + depctl.b.setd0pid = 1; + } + } + depctl.b.epena = 1; + depctl.b.cnak = 1; + + dwc_modify_reg32(addr, 0, depctl.d32); + depctl.d32 = dwc_read_reg32(addr); + + if(ep->is_in && core_if->dma_enable == 0) { + write_isoc_frame_data(core_if, ep); + } + +} + +#endif //DWC_EN_ISOC diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_cil.h b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_cil.h new file mode 100644 index 0000000000..95079920a9 --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_cil.h @@ -0,0 +1,1098 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.h $ + * $Revision: 1.2 $ + * $Date: 2008-11-21 05:39:15 $ + * $Change: 1099526 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + +#if !defined(__DWC_CIL_H__) +#define __DWC_CIL_H__ + +#include <linux/workqueue.h> +#include <linux/version.h> +#include <asm/param.h> + +#include "linux/dwc_otg_plat.h" +#include "dwc_otg_regs.h" +#ifdef DEBUG +#include "linux/timer.h" +#endif + +/** + * @file + * This file contains the interface to the Core Interface Layer. + */ + + +/** Macros defined for DWC OTG HW Release verison */ +#define OTG_CORE_REV_2_00 0x4F542000 +#define OTG_CORE_REV_2_60a 0x4F54260A +#define OTG_CORE_REV_2_71a 0x4F54271A +#define OTG_CORE_REV_2_72a 0x4F54272A + +/** +*/ +typedef struct iso_pkt_info +{ + uint32_t offset; + uint32_t length; + int32_t status; +} iso_pkt_info_t; +/** + * The <code>dwc_ep</code> structure represents the state of a single + * endpoint when acting in device mode. It contains the data items + * needed for an endpoint to be activated and transfer packets. + */ +typedef struct dwc_ep +{ + /** EP number used for register address lookup */ + uint8_t num; + /** EP direction 0 = OUT */ + unsigned is_in : 1; + /** EP active. */ + unsigned active : 1; + + /** Periodic Tx FIFO # for IN EPs For INTR EP set to 0 to use non-periodic Tx FIFO + If dedicated Tx FIFOs are enabled for all IN Eps - Tx FIFO # FOR IN EPs*/ + unsigned tx_fifo_num : 4; + /** EP type: 0 - Control, 1 - ISOC, 2 - BULK, 3 - INTR */ + unsigned type : 2; +#define DWC_OTG_EP_TYPE_CONTROL 0 +#define DWC_OTG_EP_TYPE_ISOC 1 +#define DWC_OTG_EP_TYPE_BULK 2 +#define DWC_OTG_EP_TYPE_INTR 3 + + /** DATA start PID for INTR and BULK EP */ + unsigned data_pid_start : 1; + /** Frame (even/odd) for ISOC EP */ + unsigned even_odd_frame : 1; + /** Max Packet bytes */ + unsigned maxpacket : 11; + + /** Max Transfer size */ + unsigned maxxfer : 16; + + /** @name Transfer state */ + /** @{ */ + + /** + * Pointer to the beginning of the transfer buffer -- do not modify + * during transfer. + */ + + uint32_t dma_addr; + + uint32_t dma_desc_addr; + dwc_otg_dma_desc_t* desc_addr; + + + uint8_t *start_xfer_buff; + /** pointer to the transfer buffer */ + uint8_t *xfer_buff; + /** Number of bytes to transfer */ + unsigned xfer_len : 19; + /** Number of bytes transferred. */ + unsigned xfer_count : 19; + /** Sent ZLP */ + unsigned sent_zlp : 1; + /** Total len for control transfer */ + unsigned total_len : 19; + + /** stall clear flag */ + unsigned stall_clear_flag : 1; + + /** Allocated DMA Desc count */ + uint32_t desc_cnt; + +#ifdef DWC_EN_ISOC + /** + * Variables specific for ISOC EPs + * + */ + /** DMA addresses of ISOC buffers */ + uint32_t dma_addr0; + uint32_t dma_addr1; + + uint32_t iso_dma_desc_addr; + dwc_otg_dma_desc_t* iso_desc_addr; + + /** pointer to the transfer buffers */ + uint8_t *xfer_buff0; + uint8_t *xfer_buff1; + + /** number of ISOC Buffer is processing */ + uint32_t proc_buf_num; + /** Interval of ISOC Buffer processing */ + uint32_t buf_proc_intrvl; + /** Data size for regular frame */ + uint32_t data_per_frame; + + /* todo - pattern data support is to be implemented in the future */ + /** Data size for pattern frame */ + uint32_t data_pattern_frame; + /** Frame number of pattern data */ + uint32_t sync_frame; + + /** bInterval */ + uint32_t bInterval; + /** ISO Packet number per frame */ + uint32_t pkt_per_frm; + /** Next frame num for which will be setup DMA Desc */ + uint32_t next_frame; + /** Number of packets per buffer processing */ + uint32_t pkt_cnt; + /** Info for all isoc packets */ + iso_pkt_info_t *pkt_info; + /** current pkt number */ + uint32_t cur_pkt; + /** current pkt number */ + uint8_t *cur_pkt_addr; + /** current pkt number */ + uint32_t cur_pkt_dma_addr; +#endif //DWC_EN_ISOC +/** @} */ +} dwc_ep_t; + +/* + * Reasons for halting a host channel. + */ +typedef enum dwc_otg_halt_status +{ + DWC_OTG_HC_XFER_NO_HALT_STATUS, + DWC_OTG_HC_XFER_COMPLETE, + DWC_OTG_HC_XFER_URB_COMPLETE, + DWC_OTG_HC_XFER_ACK, + DWC_OTG_HC_XFER_NAK, + DWC_OTG_HC_XFER_NYET, + DWC_OTG_HC_XFER_STALL, + DWC_OTG_HC_XFER_XACT_ERR, + DWC_OTG_HC_XFER_FRAME_OVERRUN, + DWC_OTG_HC_XFER_BABBLE_ERR, + DWC_OTG_HC_XFER_DATA_TOGGLE_ERR, + DWC_OTG_HC_XFER_AHB_ERR, + DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE, + DWC_OTG_HC_XFER_URB_DEQUEUE +} dwc_otg_halt_status_e; + +/** + * Host channel descriptor. This structure represents the state of a single + * host channel when acting in host mode. It contains the data items needed to + * transfer packets to an endpoint via a host channel. + */ +typedef struct dwc_hc +{ + /** Host channel number used for register address lookup */ + uint8_t hc_num; + + /** Device to access */ + unsigned dev_addr : 7; + + /** EP to access */ + unsigned ep_num : 4; + + /** EP direction. 0: OUT, 1: IN */ + unsigned ep_is_in : 1; + + /** + * EP speed. + * One of the following values: + * - DWC_OTG_EP_SPEED_LOW + * - DWC_OTG_EP_SPEED_FULL + * - DWC_OTG_EP_SPEED_HIGH + */ + unsigned speed : 2; +#define DWC_OTG_EP_SPEED_LOW 0 +#define DWC_OTG_EP_SPEED_FULL 1 +#define DWC_OTG_EP_SPEED_HIGH 2 + + /** + * Endpoint type. + * One of the following values: + * - DWC_OTG_EP_TYPE_CONTROL: 0 + * - DWC_OTG_EP_TYPE_ISOC: 1 + * - DWC_OTG_EP_TYPE_BULK: 2 + * - DWC_OTG_EP_TYPE_INTR: 3 + */ + unsigned ep_type : 2; + + /** Max packet size in bytes */ + unsigned max_packet : 11; + + /** + * PID for initial transaction. + * 0: DATA0,<br> + * 1: DATA2,<br> + * 2: DATA1,<br> + * 3: MDATA (non-Control EP), + * SETUP (Control EP) + */ + unsigned data_pid_start : 2; +#define DWC_OTG_HC_PID_DATA0 0 +#define DWC_OTG_HC_PID_DATA2 1 +#define DWC_OTG_HC_PID_DATA1 2 +#define DWC_OTG_HC_PID_MDATA 3 +#define DWC_OTG_HC_PID_SETUP 3 + + /** Number of periodic transactions per (micro)frame */ + unsigned multi_count: 2; + + /** @name Transfer State */ + /** @{ */ + + /** Pointer to the current transfer buffer position. */ + uint8_t *xfer_buff; + /** Total number of bytes to transfer. */ + uint32_t xfer_len; + /** Number of bytes transferred so far. */ + uint32_t xfer_count; + /** Packet count at start of transfer.*/ + uint16_t start_pkt_count; + + /** + * Flag to indicate whether the transfer has been started. Set to 1 if + * it has been started, 0 otherwise. + */ + uint8_t xfer_started; + + /** + * Set to 1 to indicate that a PING request should be issued on this + * channel. If 0, process normally. + */ + uint8_t do_ping; + + /** + * Set to 1 to indicate that the error count for this transaction is + * non-zero. Set to 0 if the error count is 0. + */ + uint8_t error_state; + + /** + * Set to 1 to indicate that this channel should be halted the next + * time a request is queued for the channel. This is necessary in + * slave mode if no request queue space is available when an attempt + * is made to halt the channel. + */ + uint8_t halt_on_queue; + + /** + * Set to 1 if the host channel has been halted, but the core is not + * finished flushing queued requests. Otherwise 0. + */ + uint8_t halt_pending; + + /** + * Reason for halting the host channel. + */ + dwc_otg_halt_status_e halt_status; + + /* + * Split settings for the host channel + */ + uint8_t do_split; /**< Enable split for the channel */ + uint8_t complete_split; /**< Enable complete split */ + uint8_t hub_addr; /**< Address of high speed hub */ + + uint8_t port_addr; /**< Port of the low/full speed device */ + /** Split transaction position + * One of the following values: + * - DWC_HCSPLIT_XACTPOS_MID + * - DWC_HCSPLIT_XACTPOS_BEGIN + * - DWC_HCSPLIT_XACTPOS_END + * - DWC_HCSPLIT_XACTPOS_ALL */ + uint8_t xact_pos; + + /** Set when the host channel does a short read. */ + uint8_t short_read; + + /** + * Number of requests issued for this channel since it was assigned to + * the current transfer (not counting PINGs). + */ + uint8_t requests; + + /** + * Queue Head for the transfer being processed by this channel. + */ + struct dwc_otg_qh *qh; + + /** @} */ + + /** Entry in list of host channels. */ + struct list_head hc_list_entry; +} dwc_hc_t; + +/** + * The following parameters may be specified when starting the module. These + * parameters define how the DWC_otg controller should be configured. + * Parameter values are passed to the CIL initialization function + * dwc_otg_cil_init. + */ +typedef struct dwc_otg_core_params +{ + int32_t opt; +#define dwc_param_opt_default 1 + + /** + * Specifies the OTG capabilities. The driver will automatically + * detect the value for this parameter if none is specified. + * 0 - HNP and SRP capable (default) + * 1 - SRP Only capable + * 2 - No HNP/SRP capable + */ + int32_t otg_cap; +#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0 +#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1 +#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2 +#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE + + /** + * Specifies whether to use slave or DMA mode for accessing the data + * FIFOs. The driver will automatically detect the value for this + * parameter if none is specified. + * 0 - Slave + * 1 - DMA (default, if available) + */ + int32_t dma_enable; +#define dwc_param_dma_enable_default 1 + + /** + * When DMA mode is enabled specifies whether to use address DMA or DMA Descritor mode for accessing the data + * FIFOs in device mode. The driver will automatically detect the value for this + * parameter if none is specified. + * 0 - address DMA + * 1 - DMA Descriptor(default, if available) + */ + int32_t dma_desc_enable; +#define dwc_param_dma_desc_enable_default 0 + /** The DMA Burst size (applicable only for External DMA + * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32) + */ + int32_t dma_burst_size; /* Translate this to GAHBCFG values */ +#define dwc_param_dma_burst_size_default 32 + + /** + * Specifies the maximum speed of operation in host and device mode. + * The actual speed depends on the speed of the attached device and + * the value of phy_type. The actual speed depends on the speed of the + * attached device. + * 0 - High Speed (default) + * 1 - Full Speed + */ + int32_t speed; +#define dwc_param_speed_default 0 +#define DWC_SPEED_PARAM_HIGH 0 +#define DWC_SPEED_PARAM_FULL 1 + + /** Specifies whether low power mode is supported when attached + * to a Full Speed or Low Speed device in host mode. + * 0 - Don't support low power mode (default) + * 1 - Support low power mode + */ + int32_t host_support_fs_ls_low_power; +#define dwc_param_host_support_fs_ls_low_power_default 0 + + /** Specifies the PHY clock rate in low power mode when connected to a + * Low Speed device in host mode. This parameter is applicable only if + * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS + * then defaults to 6 MHZ otherwise 48 MHZ. + * + * 0 - 48 MHz + * 1 - 6 MHz + */ + int32_t host_ls_low_power_phy_clk; +#define dwc_param_host_ls_low_power_phy_clk_default 0 +#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0 +#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1 + + /** + * 0 - Use cC FIFO size parameters + * 1 - Allow dynamic FIFO sizing (default) + */ + int32_t enable_dynamic_fifo; +#define dwc_param_enable_dynamic_fifo_default 1 + + /** Total number of 4-byte words in the data FIFO memory. This + * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic + * Tx FIFOs. + * 32 to 32768 (default 8192) + * Note: The total FIFO memory depth in the FPGA configuration is 8192. + */ + int32_t data_fifo_size; +#define dwc_param_data_fifo_size_default 8192 + + /** Number of 4-byte words in the Rx FIFO in device mode when dynamic + * FIFO sizing is enabled. + * 16 to 32768 (default 1064) + */ + int32_t dev_rx_fifo_size; +#define dwc_param_dev_rx_fifo_size_default 1064 + + /** Number of 4-byte words in the non-periodic Tx FIFO in device mode + * when dynamic FIFO sizing is enabled. + * 16 to 32768 (default 1024) + */ + int32_t dev_nperio_tx_fifo_size; +#define dwc_param_dev_nperio_tx_fifo_size_default 1024 + + /** Number of 4-byte words in each of the periodic Tx FIFOs in device + * mode when dynamic FIFO sizing is enabled. + * 4 to 768 (default 256) + */ + uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS]; +#define dwc_param_dev_perio_tx_fifo_size_default 256 + + /** Number of 4-byte words in the Rx FIFO in host mode when dynamic + * FIFO sizing is enabled. + * 16 to 32768 (default 1024) + */ + int32_t host_rx_fifo_size; +#define dwc_param_host_rx_fifo_size_default 1024 + + /** Number of 4-byte words in the non-periodic Tx FIFO in host mode + * when Dynamic FIFO sizing is enabled in the core. + * 16 to 32768 (default 1024) + */ + int32_t host_nperio_tx_fifo_size; +#define dwc_param_host_nperio_tx_fifo_size_default 1024 + + /** Number of 4-byte words in the host periodic Tx FIFO when dynamic + * FIFO sizing is enabled. + * 16 to 32768 (default 1024) + */ + int32_t host_perio_tx_fifo_size; +#define dwc_param_host_perio_tx_fifo_size_default 1024 + + /** The maximum transfer size supported in bytes. + * 2047 to 65,535 (default 65,535) + */ + int32_t max_transfer_size; +#define dwc_param_max_transfer_size_default 65535 + + /** The maximum number of packets in a transfer. + * 15 to 511 (default 511) + */ + int32_t max_packet_count; +#define dwc_param_max_packet_count_default 511 + + /** The number of host channel registers to use. + * 1 to 16 (default 12) + * Note: The FPGA configuration supports a maximum of 12 host channels. + */ + int32_t host_channels; +#define dwc_param_host_channels_default 12 + + /** The number of endpoints in addition to EP0 available for device + * mode operations. + * 1 to 15 (default 6 IN and OUT) + * Note: The FPGA configuration supports a maximum of 6 IN and OUT + * endpoints in addition to EP0. + */ + int32_t dev_endpoints; +#define dwc_param_dev_endpoints_default 6 + + /** + * Specifies the type of PHY interface to use. By default, the driver + * will automatically detect the phy_type. + * + * 0 - Full Speed PHY + * 1 - UTMI+ (default) + * 2 - ULPI + */ + int32_t phy_type; +#define DWC_PHY_TYPE_PARAM_FS 0 +#define DWC_PHY_TYPE_PARAM_UTMI 1 +#define DWC_PHY_TYPE_PARAM_ULPI 2 +#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI + + /** + * Specifies the UTMI+ Data Width. This parameter is + * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI + * PHY_TYPE, this parameter indicates the data width between + * the MAC and the ULPI Wrapper.) Also, this parameter is + * applicable only if the OTG_HSPHY_WIDTH cC parameter was set + * to "8 and 16 bits", meaning that the core has been + * configured to work at either data path width. + * + * 8 or 16 bits (default 16) + */ + int32_t phy_utmi_width; +#define dwc_param_phy_utmi_width_default 16 + + /** + * Specifies whether the ULPI operates at double or single + * data rate. This parameter is only applicable if PHY_TYPE is + * ULPI. + * + * 0 - single data rate ULPI interface with 8 bit wide data + * bus (default) + * 1 - double data rate ULPI interface with 4 bit wide data + * bus + */ + int32_t phy_ulpi_ddr; +#define dwc_param_phy_ulpi_ddr_default 0 + + /** + * Specifies whether to use the internal or external supply to + * drive the vbus with a ULPI phy. + */ + int32_t phy_ulpi_ext_vbus; +#define DWC_PHY_ULPI_INTERNAL_VBUS 0 +#define DWC_PHY_ULPI_EXTERNAL_VBUS 1 +#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS + + /** + * Specifies whether to use the I2Cinterface for full speed PHY. This + * parameter is only applicable if PHY_TYPE is FS. + * 0 - No (default) + * 1 - Yes + */ + int32_t i2c_enable; +#define dwc_param_i2c_enable_default 0 + + int32_t ulpi_fs_ls; +#define dwc_param_ulpi_fs_ls_default 0 + + int32_t ts_dline; +#define dwc_param_ts_dline_default 0 + + /** + * Specifies whether dedicated transmit FIFOs are + * enabled for non periodic IN endpoints in device mode + * 0 - No + * 1 - Yes + */ + int32_t en_multiple_tx_fifo; +#define dwc_param_en_multiple_tx_fifo_default 1 + + /** Number of 4-byte words in each of the Tx FIFOs in device + * mode when dynamic FIFO sizing is enabled. + * 4 to 768 (default 256) + */ + uint32_t dev_tx_fifo_size[MAX_TX_FIFOS]; +#define dwc_param_dev_tx_fifo_size_default 256 + + /** Thresholding enable flag- + * bit 0 - enable non-ISO Tx thresholding + * bit 1 - enable ISO Tx thresholding + * bit 2 - enable Rx thresholding + */ + uint32_t thr_ctl; +#define dwc_param_thr_ctl_default 0 + + /** Thresholding length for Tx + * FIFOs in 32 bit DWORDs + */ + uint32_t tx_thr_length; +#define dwc_param_tx_thr_length_default 64 + + /** Thresholding length for Rx + * FIFOs in 32 bit DWORDs + */ + uint32_t rx_thr_length; +#define dwc_param_rx_thr_length_default 64 + + /** Per Transfer Interrupt + * mode enable flag + * 1 - Enabled + * 0 - Disabled + */ + uint32_t pti_enable; +#define dwc_param_pti_enable_default 0 + + /** Molti Processor Interrupt + * mode enable flag + * 1 - Enabled + * 0 - Disabled + */ + uint32_t mpi_enable; +#define dwc_param_mpi_enable_default 0 + +} dwc_otg_core_params_t; + +#ifdef DEBUG +struct dwc_otg_core_if; +typedef struct hc_xfer_info +{ + struct dwc_otg_core_if *core_if; + dwc_hc_t *hc; +} hc_xfer_info_t; +#endif + +/** + * The <code>dwc_otg_core_if</code> structure contains information needed to manage + * the DWC_otg controller acting in either host or device mode. It + * represents the programming view of the controller as a whole. + */ +typedef struct dwc_otg_core_if +{ + /** Parameters that define how the core should be configured.*/ + dwc_otg_core_params_t *core_params; + + /** Core Global registers starting at offset 000h. */ + dwc_otg_core_global_regs_t *core_global_regs; + + /** Device-specific information */ + dwc_otg_dev_if_t *dev_if; + /** Host-specific information */ + dwc_otg_host_if_t *host_if; + + /** Value from SNPSID register */ + uint32_t snpsid; + + /* + * Set to 1 if the core PHY interface bits in USBCFG have been + * initialized. + */ + uint8_t phy_init_done; + + /* + * SRP Success flag, set by srp success interrupt in FS I2C mode + */ + uint8_t srp_success; + uint8_t srp_timer_started; + + /* Common configuration information */ + /** Power and Clock Gating Control Register */ + volatile uint32_t *pcgcctl; +#define DWC_OTG_PCGCCTL_OFFSET 0xE00 + + /** Push/pop addresses for endpoints or host channels.*/ + uint32_t *data_fifo[MAX_EPS_CHANNELS]; +#define DWC_OTG_DATA_FIFO_OFFSET 0x1000 +#define DWC_OTG_DATA_FIFO_SIZE 0x1000 + + /** Total RAM for FIFOs (Bytes) */ + uint16_t total_fifo_size; + /** Size of Rx FIFO (Bytes) */ + uint16_t rx_fifo_size; + /** Size of Non-periodic Tx FIFO (Bytes) */ + uint16_t nperio_tx_fifo_size; + + + /** 1 if DMA is enabled, 0 otherwise. */ + uint8_t dma_enable; + + /** 1 if Descriptor DMA mode is enabled, 0 otherwise. */ + uint8_t dma_desc_enable; + + /** 1 if PTI Enhancement mode is enabled, 0 otherwise. */ + uint8_t pti_enh_enable; + + /** 1 if MPI Enhancement mode is enabled, 0 otherwise. */ + uint8_t multiproc_int_enable; + + /** 1 if dedicated Tx FIFOs are enabled, 0 otherwise. */ + uint8_t en_multiple_tx_fifo; + + /** Set to 1 if multiple packets of a high-bandwidth transfer is in + * process of being queued */ + uint8_t queuing_high_bandwidth; + + /** Hardware Configuration -- stored here for convenience.*/ + hwcfg1_data_t hwcfg1; + hwcfg2_data_t hwcfg2; + hwcfg3_data_t hwcfg3; + hwcfg4_data_t hwcfg4; + + /** Host and Device Configuration -- stored here for convenience.*/ + hcfg_data_t hcfg; + dcfg_data_t dcfg; + + /** The operational State, during transations + * (a_host>>a_peripherial and b_device=>b_host) this may not + * match the core but allows the software to determine + * transitions. + */ + uint8_t op_state; + + /** + * Set to 1 if the HCD needs to be restarted on a session request + * interrupt. This is required if no connector ID status change has + * occurred since the HCD was last disconnected. + */ + uint8_t restart_hcd_on_session_req; + + /** HCD callbacks */ + /** A-Device is a_host */ +#define A_HOST (1) + /** A-Device is a_suspend */ +#define A_SUSPEND (2) + /** A-Device is a_peripherial */ +#define A_PERIPHERAL (3) + /** B-Device is operating as a Peripheral. */ +#define B_PERIPHERAL (4) + /** B-Device is operating as a Host. */ +#define B_HOST (5) + + /** HCD callbacks */ + struct dwc_otg_cil_callbacks *hcd_cb; + /** PCD callbacks */ + struct dwc_otg_cil_callbacks *pcd_cb; + + /** Device mode Periodic Tx FIFO Mask */ + uint32_t p_tx_msk; + /** Device mode Periodic Tx FIFO Mask */ + uint32_t tx_msk; + + /** Workqueue object used for handling several interrupts */ + struct workqueue_struct *wq_otg; + + /** Work object used for handling "Connector ID Status Change" Interrupt */ + struct work_struct w_conn_id; + + /** Work object used for handling "Wakeup Detected" Interrupt */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + struct work_struct w_wkp; +#else + struct delayed_work w_wkp; +#endif + +#ifdef DEBUG + uint32_t start_hcchar_val[MAX_EPS_CHANNELS]; + + hc_xfer_info_t hc_xfer_info[MAX_EPS_CHANNELS]; + struct timer_list hc_xfer_timer[MAX_EPS_CHANNELS]; + + uint32_t hfnum_7_samples; + uint64_t hfnum_7_frrem_accum; + uint32_t hfnum_0_samples; + uint64_t hfnum_0_frrem_accum; + uint32_t hfnum_other_samples; + uint64_t hfnum_other_frrem_accum; +#endif + + +} dwc_otg_core_if_t; + +/*We must clear S3C24XX_EINTPEND external interrupt register + * because after clearing in this register trigerred IRQ from + * H/W core in kernel interrupt can be occured again before OTG + * handlers clear all IRQ sources of Core registers because of + * timing latencies and Low Level IRQ Type. + */ + +#ifdef CONFIG_MACH_IPMATE +#define S3C2410X_CLEAR_EINTPEND() \ +do { \ + if (!dwc_otg_read_core_intr(core_if)) { \ + __raw_writel(1UL << 11,S3C24XX_EINTPEND); \ + } \ +} while (0) +#else +#define S3C2410X_CLEAR_EINTPEND() do { } while (0) +#endif + +/* + * The following functions are functions for works + * using during handling some interrupts + */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + +extern void w_conn_id_status_change(void *p); +extern void w_wakeup_detected(void *p); + +#else + +extern void w_conn_id_status_change(struct work_struct *p); +extern void w_wakeup_detected(struct work_struct *p); + +#endif + + +/* + * The following functions support initialization of the CIL driver component + * and the DWC_otg controller. + */ +extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *_reg_base_addr, + dwc_otg_core_params_t *_core_params); +extern void dwc_otg_cil_remove(dwc_otg_core_if_t *_core_if); +extern void dwc_otg_core_init(dwc_otg_core_if_t *_core_if); +extern void dwc_otg_core_host_init(dwc_otg_core_if_t *_core_if); +extern void dwc_otg_core_dev_init(dwc_otg_core_if_t *_core_if); +extern void dwc_otg_enable_global_interrupts( dwc_otg_core_if_t *_core_if ); +extern void dwc_otg_disable_global_interrupts( dwc_otg_core_if_t *_core_if ); + +/** @name Device CIL Functions + * The following functions support managing the DWC_otg controller in device + * mode. + */ +/**@{*/ +extern void dwc_otg_wakeup(dwc_otg_core_if_t *_core_if); +extern void dwc_otg_read_setup_packet (dwc_otg_core_if_t *_core_if, uint32_t *_dest); +extern uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *_core_if); +extern void dwc_otg_ep0_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); +extern void dwc_otg_ep_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); +extern void dwc_otg_ep_deactivate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); +extern void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); +extern void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); +extern void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); +extern void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); +extern void dwc_otg_ep_write_packet(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep, int _dma); +extern void dwc_otg_ep_set_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); +extern void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); +extern void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *_core_if); +extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *_core_if); +extern void dwc_otg_dump_spram(dwc_otg_core_if_t *_core_if); +#ifdef DWC_EN_ISOC +extern void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep); +extern void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep); +#endif //DWC_EN_ISOC +/**@}*/ + +/** @name Host CIL Functions + * The following functions support managing the DWC_otg controller in host + * mode. + */ +/**@{*/ +extern void dwc_otg_hc_init(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc); +extern void dwc_otg_hc_halt(dwc_otg_core_if_t *_core_if, + dwc_hc_t *_hc, + dwc_otg_halt_status_e _halt_status); +extern void dwc_otg_hc_cleanup(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc); +extern void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc); +extern int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc); +extern void dwc_otg_hc_do_ping(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc); +extern void dwc_otg_hc_write_packet(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc); +extern void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *_core_if); +extern void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *_core_if); + +/** + * This function Reads HPRT0 in preparation to modify. It keeps the + * WC bits 0 so that if they are read as 1, they won't clear when you + * write it back + */ +static inline uint32_t dwc_otg_read_hprt0(dwc_otg_core_if_t *_core_if) +{ + hprt0_data_t hprt0; + hprt0.d32 = dwc_read_reg32(_core_if->host_if->hprt0); + hprt0.b.prtena = 0; + hprt0.b.prtconndet = 0; + hprt0.b.prtenchng = 0; + hprt0.b.prtovrcurrchng = 0; + return hprt0.d32; +} + +extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t *_core_if); +/**@}*/ + +/** @name Common CIL Functions + * The following functions support managing the DWC_otg controller in either + * device or host mode. + */ +/**@{*/ + +extern void dwc_otg_read_packet(dwc_otg_core_if_t *core_if, + uint8_t *dest, + uint16_t bytes); + +extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t *_core_if); + +extern void dwc_otg_flush_tx_fifo( dwc_otg_core_if_t *_core_if, + const int _num ); +extern void dwc_otg_flush_rx_fifo( dwc_otg_core_if_t *_core_if ); +extern void dwc_otg_core_reset( dwc_otg_core_if_t *_core_if ); + +extern dwc_otg_dma_desc_t* dwc_otg_ep_alloc_desc_chain(uint32_t * dma_desc_addr, uint32_t count); +extern void dwc_otg_ep_free_desc_chain(dwc_otg_dma_desc_t* desc_addr, uint32_t dma_desc_addr, uint32_t count); + +/** + * This function returns the Core Interrupt register. + */ +static inline uint32_t dwc_otg_read_core_intr(dwc_otg_core_if_t *_core_if) +{ + return (dwc_read_reg32(&_core_if->core_global_regs->gintsts) & + dwc_read_reg32(&_core_if->core_global_regs->gintmsk)); +} + +/** + * This function returns the OTG Interrupt register. + */ +static inline uint32_t dwc_otg_read_otg_intr (dwc_otg_core_if_t *_core_if) +{ + return (dwc_read_reg32 (&_core_if->core_global_regs->gotgint)); +} + +/** + * This function reads the Device All Endpoints Interrupt register and + * returns the IN endpoint interrupt bits. + */ +static inline uint32_t dwc_otg_read_dev_all_in_ep_intr(dwc_otg_core_if_t *core_if) +{ + uint32_t v; + + if(core_if->multiproc_int_enable) { + v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachint) & + dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachintmsk); + } else { + v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->daint) & + dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk); + } + return (v & 0xffff); + +} + +/** + * This function reads the Device All Endpoints Interrupt register and + * returns the OUT endpoint interrupt bits. + */ +static inline uint32_t dwc_otg_read_dev_all_out_ep_intr(dwc_otg_core_if_t *core_if) +{ + uint32_t v; + + if(core_if->multiproc_int_enable) { + v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachint) & + dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachintmsk); + } else { + v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->daint) & + dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk); + } + + return ((v & 0xffff0000) >> 16); +} + +/** + * This function returns the Device IN EP Interrupt register + */ +static inline uint32_t dwc_otg_read_dev_in_ep_intr(dwc_otg_core_if_t *core_if, + dwc_ep_t *ep) +{ + dwc_otg_dev_if_t *dev_if = core_if->dev_if; + uint32_t v, msk, emp; + + if(core_if->multiproc_int_enable) { + msk = dwc_read_reg32(&dev_if->dev_global_regs->diepeachintmsk[ep->num]); + emp = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk); + msk |= ((emp >> ep->num) & 0x1) << 7; + v = dwc_read_reg32(&dev_if->in_ep_regs[ep->num]->diepint) & msk; + } else { + msk = dwc_read_reg32(&dev_if->dev_global_regs->diepmsk); + emp = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk); + msk |= ((emp >> ep->num) & 0x1) << 7; + v = dwc_read_reg32(&dev_if->in_ep_regs[ep->num]->diepint) & msk; + } + + + return v; +} +/** + * This function returns the Device OUT EP Interrupt register + */ +static inline uint32_t dwc_otg_read_dev_out_ep_intr(dwc_otg_core_if_t *_core_if, + dwc_ep_t *_ep) +{ + dwc_otg_dev_if_t *dev_if = _core_if->dev_if; + uint32_t v; + doepmsk_data_t msk = { .d32 = 0 }; + + if(_core_if->multiproc_int_enable) { + msk.d32 = dwc_read_reg32(&dev_if->dev_global_regs->doepeachintmsk[_ep->num]); + if(_core_if->pti_enh_enable) { + msk.b.pktdrpsts = 1; + } + v = dwc_read_reg32( &dev_if->out_ep_regs[_ep->num]->doepint) & msk.d32; + } else { + msk.d32 = dwc_read_reg32(&dev_if->dev_global_regs->doepmsk); + if(_core_if->pti_enh_enable) { + msk.b.pktdrpsts = 1; + } + v = dwc_read_reg32( &dev_if->out_ep_regs[_ep->num]->doepint) & msk.d32; + } + return v; +} + +/** + * This function returns the Host All Channel Interrupt register + */ +static inline uint32_t dwc_otg_read_host_all_channels_intr (dwc_otg_core_if_t *_core_if) +{ + return (dwc_read_reg32 (&_core_if->host_if->host_global_regs->haint)); +} + +static inline uint32_t dwc_otg_read_host_channel_intr (dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc) +{ + return (dwc_read_reg32 (&_core_if->host_if->hc_regs[_hc->hc_num]->hcint)); +} + + +/** + * This function returns the mode of the operation, host or device. + * + * @return 0 - Device Mode, 1 - Host Mode + */ +static inline uint32_t dwc_otg_mode(dwc_otg_core_if_t *_core_if) +{ + return (dwc_read_reg32( &_core_if->core_global_regs->gintsts ) & 0x1); +} + +static inline uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t *_core_if) +{ + return (dwc_otg_mode(_core_if) != DWC_HOST_MODE); +} +static inline uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t *_core_if) +{ + return (dwc_otg_mode(_core_if) == DWC_HOST_MODE); +} + +extern int32_t dwc_otg_handle_common_intr( dwc_otg_core_if_t *_core_if ); + + +/**@}*/ + +/** + * DWC_otg CIL callback structure. This structure allows the HCD and + * PCD to register functions used for starting and stopping the PCD + * and HCD for role change on for a DRD. + */ +typedef struct dwc_otg_cil_callbacks +{ + /** Start function for role change */ + int (*start) (void *_p); + /** Stop Function for role change */ + int (*stop) (void *_p); + /** Disconnect Function for role change */ + int (*disconnect) (void *_p); + /** Resume/Remote wakeup Function */ + int (*resume_wakeup) (void *_p); + /** Suspend function */ + int (*suspend) (void *_p); + /** Session Start (SRP) */ + int (*session_start) (void *_p); + /** Pointer passed to start() and stop() */ + void *p; +} dwc_otg_cil_callbacks_t; + +extern void dwc_otg_cil_register_pcd_callbacks( dwc_otg_core_if_t *_core_if, + dwc_otg_cil_callbacks_t *_cb, + void *_p); +extern void dwc_otg_cil_register_hcd_callbacks( dwc_otg_core_if_t *_core_if, + dwc_otg_cil_callbacks_t *_cb, + void *_p); + +#endif + diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_cil_intr.c b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_cil_intr.c new file mode 100644 index 0000000000..61b17b35dc --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_cil_intr.c @@ -0,0 +1,750 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil_intr.c $ + * $Revision: 1.2 $ + * $Date: 2008-11-21 05:39:15 $ + * $Change: 1065567 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + +/** @file + * + * The Core Interface Layer provides basic services for accessing and + * managing the DWC_otg hardware. These services are used by both the + * Host Controller Driver and the Peripheral Controller Driver. + * + * This file contains the Common Interrupt handlers. + */ +#include "linux/dwc_otg_plat.h" +#include "dwc_otg_regs.h" +#include "dwc_otg_cil.h" + +#ifdef DEBUG +inline const char *op_state_str(dwc_otg_core_if_t *core_if) +{ + return (core_if->op_state==A_HOST?"a_host": + (core_if->op_state==A_SUSPEND?"a_suspend": + (core_if->op_state==A_PERIPHERAL?"a_peripheral": + (core_if->op_state==B_PERIPHERAL?"b_peripheral": + (core_if->op_state==B_HOST?"b_host": + "unknown"))))); +} +#endif + +/** This function will log a debug message + * + * @param core_if Programming view of DWC_otg controller. + */ +int32_t dwc_otg_handle_mode_mismatch_intr (dwc_otg_core_if_t *core_if) +{ + gintsts_data_t gintsts; + DWC_WARN("Mode Mismatch Interrupt: currently in %s mode\n", + dwc_otg_mode(core_if) ? "Host" : "Device"); + + /* Clear interrupt */ + gintsts.d32 = 0; + gintsts.b.modemismatch = 1; + dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32); + return 1; +} + +/** Start the HCD. Helper function for using the HCD callbacks. + * + * @param core_if Programming view of DWC_otg controller. + */ +static inline void hcd_start(dwc_otg_core_if_t *core_if) +{ + if (core_if->hcd_cb && core_if->hcd_cb->start) { + core_if->hcd_cb->start(core_if->hcd_cb->p); + } +} +/** Stop the HCD. Helper function for using the HCD callbacks. + * + * @param core_if Programming view of DWC_otg controller. + */ +static inline void hcd_stop(dwc_otg_core_if_t *core_if) +{ + if (core_if->hcd_cb && core_if->hcd_cb->stop) { + core_if->hcd_cb->stop(core_if->hcd_cb->p); + } +} +/** Disconnect the HCD. Helper function for using the HCD callbacks. + * + * @param core_if Programming view of DWC_otg controller. + */ +static inline void hcd_disconnect(dwc_otg_core_if_t *core_if) +{ + if (core_if->hcd_cb && core_if->hcd_cb->disconnect) { + core_if->hcd_cb->disconnect(core_if->hcd_cb->p); + } +} +/** Inform the HCD the a New Session has begun. Helper function for + * using the HCD callbacks. + * + * @param core_if Programming view of DWC_otg controller. + */ +static inline void hcd_session_start(dwc_otg_core_if_t *core_if) +{ + if (core_if->hcd_cb && core_if->hcd_cb->session_start) { + core_if->hcd_cb->session_start(core_if->hcd_cb->p); + } +} + +/** Start the PCD. Helper function for using the PCD callbacks. + * + * @param core_if Programming view of DWC_otg controller. + */ +static inline void pcd_start(dwc_otg_core_if_t *core_if) +{ + if (core_if->pcd_cb && core_if->pcd_cb->start) { + core_if->pcd_cb->start(core_if->pcd_cb->p); + } +} +/** Stop the PCD. Helper function for using the PCD callbacks. + * + * @param core_if Programming view of DWC_otg controller. + */ +static inline void pcd_stop(dwc_otg_core_if_t *core_if) +{ + if (core_if->pcd_cb && core_if->pcd_cb->stop) { + core_if->pcd_cb->stop(core_if->pcd_cb->p); + } +} +/** Suspend the PCD. Helper function for using the PCD callbacks. + * + * @param core_if Programming view of DWC_otg controller. + */ +static inline void pcd_suspend(dwc_otg_core_if_t *core_if) +{ + if (core_if->pcd_cb && core_if->pcd_cb->suspend) { + core_if->pcd_cb->suspend(core_if->pcd_cb->p); + } +} +/** Resume the PCD. Helper function for using the PCD callbacks. + * + * @param core_if Programming view of DWC_otg controller. + */ +static inline void pcd_resume(dwc_otg_core_if_t *core_if) +{ + if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { + core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); + } +} + +/** + * This function handles the OTG Interrupts. It reads the OTG + * Interrupt Register (GOTGINT) to determine what interrupt has + * occurred. + * + * @param core_if Programming view of DWC_otg controller. + */ +int32_t dwc_otg_handle_otg_intr(dwc_otg_core_if_t *core_if) +{ + dwc_otg_core_global_regs_t *global_regs = + core_if->core_global_regs; + gotgint_data_t gotgint; + gotgctl_data_t gotgctl; + gintmsk_data_t gintmsk; + + gotgint.d32 = dwc_read_reg32(&global_regs->gotgint); + gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl); + DWC_DEBUGPL(DBG_CIL, "gotgctl=%08x\n", gotgctl.d32); + + if (gotgint.b.sesenddet) { + DWC_DEBUGPL(DBG_ANY, "OTG Interrupt: " + "Session End Detected++ (%s)\n", + op_state_str(core_if)); + gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl); + + if (core_if->op_state == B_HOST) { + pcd_start(core_if); + core_if->op_state = B_PERIPHERAL; + } else { + /* If not B_HOST and Device HNP still set. HNP + * Did not succeed!*/ + if (gotgctl.b.devhnpen) { + DWC_DEBUGPL(DBG_ANY, "Session End Detected\n"); + DWC_ERROR("Device Not Connected/Responding!\n"); + } + + /* If Session End Detected the B-Cable has + * been disconnected. */ + /* Reset PCD and Gadget driver to a + * clean state. */ + pcd_stop(core_if); + } + gotgctl.d32 = 0; + gotgctl.b.devhnpen = 1; + dwc_modify_reg32(&global_regs->gotgctl, + gotgctl.d32, 0); + } + if (gotgint.b.sesreqsucstschng) { + DWC_DEBUGPL(DBG_ANY, " OTG Interrupt: " + "Session Reqeust Success Status Change++\n"); + gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl); + if (gotgctl.b.sesreqscs) { + if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) && + (core_if->core_params->i2c_enable)) { + core_if->srp_success = 1; + } + else { + pcd_resume(core_if); + /* Clear Session Request */ + gotgctl.d32 = 0; + gotgctl.b.sesreq = 1; + dwc_modify_reg32(&global_regs->gotgctl, + gotgctl.d32, 0); + } + } + } + if (gotgint.b.hstnegsucstschng) { + /* Print statements during the HNP interrupt handling + * can cause it to fail.*/ + gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl); + if (gotgctl.b.hstnegscs) { + if (dwc_otg_is_host_mode(core_if)) { + core_if->op_state = B_HOST; + /* + * Need to disable SOF interrupt immediately. + * When switching from device to host, the PCD + * interrupt handler won't handle the + * interrupt if host mode is already set. The + * HCD interrupt handler won't get called if + * the HCD state is HALT. This means that the + * interrupt does not get handled and Linux + * complains loudly. + */ + gintmsk.d32 = 0; + gintmsk.b.sofintr = 1; + dwc_modify_reg32(&global_regs->gintmsk, + gintmsk.d32, 0); + pcd_stop(core_if); + /* + * Initialize the Core for Host mode. + */ + hcd_start(core_if); + core_if->op_state = B_HOST; + } + } else { + gotgctl.d32 = 0; + gotgctl.b.hnpreq = 1; + gotgctl.b.devhnpen = 1; + dwc_modify_reg32(&global_regs->gotgctl, + gotgctl.d32, 0); + DWC_DEBUGPL(DBG_ANY, "HNP Failed\n"); + DWC_ERROR("Device Not Connected/Responding\n"); + } + } + if (gotgint.b.hstnegdet) { + /* The disconnect interrupt is set at the same time as + * Host Negotiation Detected. During the mode + * switch all interrupts are cleared so the disconnect + * interrupt handler will not get executed. + */ + DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " + "Host Negotiation Detected++ (%s)\n", + (dwc_otg_is_host_mode(core_if)?"Host":"Device")); + if (dwc_otg_is_device_mode(core_if)){ + DWC_DEBUGPL(DBG_ANY, "a_suspend->a_peripheral (%d)\n", core_if->op_state); + hcd_disconnect(core_if); + pcd_start(core_if); + core_if->op_state = A_PERIPHERAL; + } else { + /* + * Need to disable SOF interrupt immediately. When + * switching from device to host, the PCD interrupt + * handler won't handle the interrupt if host mode is + * already set. The HCD interrupt handler won't get + * called if the HCD state is HALT. This means that + * the interrupt does not get handled and Linux + * complains loudly. + */ + gintmsk.d32 = 0; + gintmsk.b.sofintr = 1; + dwc_modify_reg32(&global_regs->gintmsk, + gintmsk.d32, 0); + pcd_stop(core_if); + hcd_start(core_if); + core_if->op_state = A_HOST; + } + } + if (gotgint.b.adevtoutchng) { + DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " + "A-Device Timeout Change++\n"); + } + if (gotgint.b.debdone) { + DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " + "Debounce Done++\n"); + } + + /* Clear GOTGINT */ + dwc_write_reg32 (&core_if->core_global_regs->gotgint, gotgint.d32); + + return 1; +} + + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + +void w_conn_id_status_change(void *p) +{ + dwc_otg_core_if_t *core_if = p; + +#else + +void w_conn_id_status_change(struct work_struct *p) +{ + dwc_otg_core_if_t *core_if = container_of(p, dwc_otg_core_if_t, w_conn_id); + +#endif + + + uint32_t count = 0; + gotgctl_data_t gotgctl = { .d32 = 0 }; + + gotgctl.d32 = dwc_read_reg32(&core_if->core_global_regs->gotgctl); + DWC_DEBUGPL(DBG_CIL, "gotgctl=%0x\n", gotgctl.d32); + DWC_DEBUGPL(DBG_CIL, "gotgctl.b.conidsts=%d\n", gotgctl.b.conidsts); + + /* B-Device connector (Device Mode) */ + if (gotgctl.b.conidsts) { + /* Wait for switch to device mode. */ + while (!dwc_otg_is_device_mode(core_if)){ + DWC_PRINT("Waiting for Peripheral Mode, Mode=%s\n", + (dwc_otg_is_host_mode(core_if)?"Host":"Peripheral")); + MDELAY(100); + if (++count > 10000) *(uint32_t*)NULL=0; + } + core_if->op_state = B_PERIPHERAL; + dwc_otg_core_init(core_if); + dwc_otg_enable_global_interrupts(core_if); + pcd_start(core_if); + } else { + /* A-Device connector (Host Mode) */ + while (!dwc_otg_is_host_mode(core_if)) { + DWC_PRINT("Waiting for Host Mode, Mode=%s\n", + (dwc_otg_is_host_mode(core_if)?"Host":"Peripheral")); + MDELAY(100); + if (++count > 10000) *(uint32_t*)NULL=0; + } + core_if->op_state = A_HOST; + /* + * Initialize the Core for Host mode. + */ + dwc_otg_core_init(core_if); + dwc_otg_enable_global_interrupts(core_if); + hcd_start(core_if); + } +} + + +/** + * This function handles the Connector ID Status Change Interrupt. It + * reads the OTG Interrupt Register (GOTCTL) to determine whether this + * is a Device to Host Mode transition or a Host Mode to Device + * Transition. + * + * This only occurs when the cable is connected/removed from the PHY + * connector. + * + * @param core_if Programming view of DWC_otg controller. + */ +int32_t dwc_otg_handle_conn_id_status_change_intr(dwc_otg_core_if_t *core_if) +{ + + /* + * Need to disable SOF interrupt immediately. If switching from device + * to host, the PCD interrupt handler won't handle the interrupt if + * host mode is already set. The HCD interrupt handler won't get + * called if the HCD state is HALT. This means that the interrupt does + * not get handled and Linux complains loudly. + */ + gintmsk_data_t gintmsk = { .d32 = 0 }; + gintsts_data_t gintsts = { .d32 = 0 }; + + gintmsk.b.sofintr = 1; + dwc_modify_reg32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0); + + DWC_DEBUGPL(DBG_CIL, " ++Connector ID Status Change Interrupt++ (%s)\n", + (dwc_otg_is_host_mode(core_if)?"Host":"Device")); + + /* + * Need to schedule a work, as there are possible DELAY function calls + */ + queue_work(core_if->wq_otg, &core_if->w_conn_id); + + /* Set flag and clear interrupt */ + gintsts.b.conidstschng = 1; + dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32); + + return 1; +} + +/** + * This interrupt indicates that a device is initiating the Session + * Request Protocol to request the host to turn on bus power so a new + * session can begin. The handler responds by turning on bus power. If + * the DWC_otg controller is in low power mode, the handler brings the + * controller out of low power mode before turning on bus power. + * + * @param core_if Programming view of DWC_otg controller. + */ +int32_t dwc_otg_handle_session_req_intr(dwc_otg_core_if_t *core_if) +{ + gintsts_data_t gintsts; + +#ifndef DWC_HOST_ONLY + hprt0_data_t hprt0; + DWC_DEBUGPL(DBG_ANY, "++Session Request Interrupt++\n"); + + if (dwc_otg_is_device_mode(core_if)) { + DWC_PRINT("SRP: Device mode\n"); + } else { + DWC_PRINT("SRP: Host mode\n"); + + /* Turn on the port power bit. */ + hprt0.d32 = dwc_otg_read_hprt0(core_if); + hprt0.b.prtpwr = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + + /* Start the Connection timer. So a message can be displayed + * if connect does not occur within 10 seconds. */ + hcd_session_start(core_if); + } +#endif + + /* Clear interrupt */ + gintsts.d32 = 0; + gintsts.b.sessreqintr = 1; + dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32); + + return 1; +} + + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) +void w_wakeup_detected(void *p) +{ + dwc_otg_core_if_t* core_if = p; + +#else + +void w_wakeup_detected(struct work_struct *p) +{ + struct delayed_work *dw = container_of(p, struct delayed_work, work); + dwc_otg_core_if_t *core_if = container_of(dw, dwc_otg_core_if_t, w_wkp); + +#endif + /* + * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms + * so that OPT tests pass with all PHYs). + */ + hprt0_data_t hprt0 = {.d32=0}; +#if 0 + pcgcctl_data_t pcgcctl = {.d32=0}; + /* Restart the Phy Clock */ + pcgcctl.b.stoppclk = 1; + dwc_modify_reg32(core_if->pcgcctl, pcgcctl.d32, 0); + UDELAY(10); +#endif //0 + hprt0.d32 = dwc_otg_read_hprt0(core_if); + DWC_DEBUGPL(DBG_ANY,"Resume: HPRT0=%0x\n", hprt0.d32); +// MDELAY(70); + hprt0.b.prtres = 0; /* Resume */ + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + DWC_DEBUGPL(DBG_ANY,"Clear Resume: HPRT0=%0x\n", dwc_read_reg32(core_if->host_if->hprt0)); +} +/** + * This interrupt indicates that the DWC_otg controller has detected a + * resume or remote wakeup sequence. If the DWC_otg controller is in + * low power mode, the handler must brings the controller out of low + * power mode. The controller automatically begins resume + * signaling. The handler schedules a time to stop resume signaling. + */ +int32_t dwc_otg_handle_wakeup_detected_intr(dwc_otg_core_if_t *core_if) +{ + gintsts_data_t gintsts; + + DWC_DEBUGPL(DBG_ANY, "++Resume and Remote Wakeup Detected Interrupt++\n"); + + if (dwc_otg_is_device_mode(core_if)) { + dctl_data_t dctl = {.d32=0}; + DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", + dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts)); +#ifdef PARTIAL_POWER_DOWN + if (core_if->hwcfg4.b.power_optimiz) { + pcgcctl_data_t power = {.d32=0}; + + power.d32 = dwc_read_reg32(core_if->pcgcctl); + DWC_DEBUGPL(DBG_CIL, "PCGCCTL=%0x\n", power.d32); + + power.b.stoppclk = 0; + dwc_write_reg32(core_if->pcgcctl, power.d32); + + power.b.pwrclmp = 0; + dwc_write_reg32(core_if->pcgcctl, power.d32); + + power.b.rstpdwnmodule = 0; + dwc_write_reg32(core_if->pcgcctl, power.d32); + } +#endif + /* Clear the Remote Wakeup Signalling */ + dctl.b.rmtwkupsig = 1; + dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl, + dctl.d32, 0); + + if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { + core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); + } + + } else { + pcgcctl_data_t pcgcctl = {.d32=0}; + + /* Restart the Phy Clock */ + pcgcctl.b.stoppclk = 1; + dwc_modify_reg32(core_if->pcgcctl, pcgcctl.d32, 0); + + queue_delayed_work(core_if->wq_otg, &core_if->w_wkp, ((70 * HZ / 1000) + 1)); + } + + /* Clear interrupt */ + gintsts.d32 = 0; + gintsts.b.wkupintr = 1; + dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32); + + return 1; +} + +/** + * This interrupt indicates that a device has been disconnected from + * the root port. + */ +int32_t dwc_otg_handle_disconnect_intr(dwc_otg_core_if_t *core_if) +{ + gintsts_data_t gintsts; + + DWC_DEBUGPL(DBG_ANY, "++Disconnect Detected Interrupt++ (%s) %s\n", + (dwc_otg_is_host_mode(core_if)?"Host":"Device"), + op_state_str(core_if)); + +/** @todo Consolidate this if statement. */ +#ifndef DWC_HOST_ONLY + if (core_if->op_state == B_HOST) { + /* If in device mode Disconnect and stop the HCD, then + * start the PCD. */ + hcd_disconnect(core_if); + pcd_start(core_if); + core_if->op_state = B_PERIPHERAL; + } else if (dwc_otg_is_device_mode(core_if)) { + gotgctl_data_t gotgctl = { .d32 = 0 }; + gotgctl.d32 = dwc_read_reg32(&core_if->core_global_regs->gotgctl); + if (gotgctl.b.hstsethnpen==1) { + /* Do nothing, if HNP in process the OTG + * interrupt "Host Negotiation Detected" + * interrupt will do the mode switch. + */ + } else if (gotgctl.b.devhnpen == 0) { + /* If in device mode Disconnect and stop the HCD, then + * start the PCD. */ + hcd_disconnect(core_if); + pcd_start(core_if); + core_if->op_state = B_PERIPHERAL; + } else { + DWC_DEBUGPL(DBG_ANY,"!a_peripheral && !devhnpen\n"); + } + } else { + if (core_if->op_state == A_HOST) { + /* A-Cable still connected but device disconnected. */ + hcd_disconnect(core_if); + } + } +#endif + + gintsts.d32 = 0; + gintsts.b.disconnect = 1; + dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32); + return 1; +} +/** + * This interrupt indicates that SUSPEND state has been detected on + * the USB. + * + * For HNP the USB Suspend interrupt signals the change from + * "a_peripheral" to "a_host". + * + * When power management is enabled the core will be put in low power + * mode. + */ +int32_t dwc_otg_handle_usb_suspend_intr(dwc_otg_core_if_t *core_if) +{ + dsts_data_t dsts; + gintsts_data_t gintsts; + + DWC_DEBUGPL(DBG_ANY,"USB SUSPEND\n"); + + if (dwc_otg_is_device_mode(core_if)) { + /* Check the Device status register to determine if the Suspend + * state is active. */ + dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts); + DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", dsts.d32); + DWC_DEBUGPL(DBG_PCD, "DSTS.Suspend Status=%d " + "HWCFG4.power Optimize=%d\n", + dsts.b.suspsts, core_if->hwcfg4.b.power_optimiz); + + +#ifdef PARTIAL_POWER_DOWN +/** @todo Add a module parameter for power management. */ + + if (dsts.b.suspsts && core_if->hwcfg4.b.power_optimiz) { + pcgcctl_data_t power = {.d32=0}; + DWC_DEBUGPL(DBG_CIL, "suspend\n"); + + power.b.pwrclmp = 1; + dwc_write_reg32(core_if->pcgcctl, power.d32); + + power.b.rstpdwnmodule = 1; + dwc_modify_reg32(core_if->pcgcctl, 0, power.d32); + + power.b.stoppclk = 1; + dwc_modify_reg32(core_if->pcgcctl, 0, power.d32); + + } else { + DWC_DEBUGPL(DBG_ANY,"disconnect?\n"); + } +#endif + /* PCD callback for suspend. */ + pcd_suspend(core_if); + } else { + if (core_if->op_state == A_PERIPHERAL) { + DWC_DEBUGPL(DBG_ANY,"a_peripheral->a_host\n"); + /* Clear the a_peripheral flag, back to a_host. */ + pcd_stop(core_if); + hcd_start(core_if); + core_if->op_state = A_HOST; + } + } + + /* Clear interrupt */ + gintsts.d32 = 0; + gintsts.b.usbsuspend = 1; + dwc_write_reg32(&core_if->core_global_regs->gintsts, gintsts.d32); + + return 1; +} + + +/** + * This function returns the Core Interrupt register. + */ +static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t *core_if) +{ + gintsts_data_t gintsts; + gintmsk_data_t gintmsk; + gintmsk_data_t gintmsk_common = {.d32=0}; + gintmsk_common.b.wkupintr = 1; + gintmsk_common.b.sessreqintr = 1; + gintmsk_common.b.conidstschng = 1; + gintmsk_common.b.otgintr = 1; + gintmsk_common.b.modemismatch = 1; + gintmsk_common.b.disconnect = 1; + gintmsk_common.b.usbsuspend = 1; + /** @todo: The port interrupt occurs while in device + * mode. Added code to CIL to clear the interrupt for now! + */ + gintmsk_common.b.portintr = 1; + + gintsts.d32 = dwc_read_reg32(&core_if->core_global_regs->gintsts); + gintmsk.d32 = dwc_read_reg32(&core_if->core_global_regs->gintmsk); +#ifdef DEBUG + /* if any common interrupts set */ + if (gintsts.d32 & gintmsk_common.d32) { + DWC_DEBUGPL(DBG_ANY, "gintsts=%08x gintmsk=%08x\n", + gintsts.d32, gintmsk.d32); + } +#endif + + return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32); + +} + +/** + * Common interrupt handler. + * + * The common interrupts are those that occur in both Host and Device mode. + * This handler handles the following interrupts: + * - Mode Mismatch Interrupt + * - Disconnect Interrupt + * - OTG Interrupt + * - Connector ID Status Change Interrupt + * - Session Request Interrupt. + * - Resume / Remote Wakeup Detected Interrupt. + * + */ +int32_t dwc_otg_handle_common_intr(dwc_otg_core_if_t *core_if) +{ + int retval = 0; + gintsts_data_t gintsts; + + gintsts.d32 = dwc_otg_read_common_intr(core_if); + + if (gintsts.b.modemismatch) { + retval |= dwc_otg_handle_mode_mismatch_intr(core_if); + } + if (gintsts.b.otgintr) { + retval |= dwc_otg_handle_otg_intr(core_if); + } + if (gintsts.b.conidstschng) { + retval |= dwc_otg_handle_conn_id_status_change_intr(core_if); + } + if (gintsts.b.disconnect) { + retval |= dwc_otg_handle_disconnect_intr(core_if); + } + if (gintsts.b.sessreqintr) { + retval |= dwc_otg_handle_session_req_intr(core_if); + } + if (gintsts.b.wkupintr) { + retval |= dwc_otg_handle_wakeup_detected_intr(core_if); + } + if (gintsts.b.usbsuspend) { + retval |= dwc_otg_handle_usb_suspend_intr(core_if); + } + if (gintsts.b.portintr && dwc_otg_is_device_mode(core_if)) { + /* The port interrupt occurs while in device mode with HPRT0 + * Port Enable/Disable. + */ + gintsts.d32 = 0; + gintsts.b.portintr = 1; + dwc_write_reg32(&core_if->core_global_regs->gintsts, + gintsts.d32); + retval |= 1; + + } + + S3C2410X_CLEAR_EINTPEND(); + + return retval; +} diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_driver.c b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_driver.c new file mode 100644 index 0000000000..87d3fbbbc2 --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_driver.c @@ -0,0 +1,1265 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_driver.c $ + * $Revision: 1.7 $ + * $Date: 2008-11-21 05:39:15 $ + * $Change: 791271 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + +/** @file + * The dwc_otg_driver module provides the initialization and cleanup entry + * points for the DWC_otg driver. This module will be dynamically installed + * after Linux is booted using the insmod command. When the module is + * installed, the dwc_otg_driver_init function is called. When the module is + * removed (using rmmod), the dwc_otg_driver_cleanup function is called. + * + * This module also defines a data structure for the dwc_otg_driver, which is + * used in conjunction with the standard ARM platform_device structure. These + * structures allow the OTG driver to comply with the standard Linux driver + * model in which devices and drivers are registered with a bus driver. This + * has the benefit that Linux can expose attributes of the driver and device + * in its special sysfs file system. Users can then read or write files in + * this file system to perform diagnostics on the driver components or the + * device. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/stat.h> /* permission constants */ +#include <linux/version.h> +#include <linux/platform_device.h> + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) +# include <linux/irq.h> +#endif + +#include <asm/io.h> + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) +# include <asm/irq.h> +#endif + +#include "linux/dwc_otg_plat.h" +#include "dwc_otg_attr.h" +#include "dwc_otg_driver.h" +#include "dwc_otg_cil.h" +#include "dwc_otg_pcd.h" +#include "dwc_otg_hcd.h" + +#define DWC_DRIVER_VERSION "2.72a 24-JUN-2008" +#define DWC_DRIVER_DESC "HS OTG USB Controller driver" + +static const char dwc_driver_name[] = "dwc_otg"; + +/*-------------------------------------------------------------------------*/ +/* Encapsulate the module parameter settings */ + +static dwc_otg_core_params_t dwc_otg_module_params = { + .opt = -1, + .otg_cap = -1, + .dma_enable = -1, + .dma_desc_enable = -1, + .dma_burst_size = -1, + .speed = -1, + .host_support_fs_ls_low_power = -1, + .host_ls_low_power_phy_clk = -1, + .enable_dynamic_fifo = -1, + .data_fifo_size = -1, + .dev_rx_fifo_size = -1, + .dev_nperio_tx_fifo_size = -1, + .dev_perio_tx_fifo_size = { + /* dev_perio_tx_fifo_size_1 */ + -1, + -1, + -1, + -1, + -1, + -1, + -1, + -1, + -1, + -1, + -1, + -1, + -1, + -1, + -1 + /* 15 */ + }, + .host_rx_fifo_size = -1, + .host_nperio_tx_fifo_size = -1, + .host_perio_tx_fifo_size = -1, + .max_transfer_size = -1, + .max_packet_count = -1, + .host_channels = -1, + .dev_endpoints = -1, + .phy_type = -1, + .phy_utmi_width = -1, + .phy_ulpi_ddr = -1, + .phy_ulpi_ext_vbus = -1, + .i2c_enable = -1, + .ulpi_fs_ls = -1, + .ts_dline = -1, + .en_multiple_tx_fifo = -1, + .dev_tx_fifo_size = { + /* dev_tx_fifo_size */ + -1, + -1, + -1, + -1, + -1, + -1, + -1, + -1, + -1, + -1, + -1, + -1, + -1, + -1, + -1 + /* 15 */ + }, + .thr_ctl = -1, + .tx_thr_length = -1, + .rx_thr_length = -1, + .pti_enable = -1, + .mpi_enable = -1, +}; + +/** + * This function shows the Driver Version. + */ +static ssize_t version_show(struct device_driver *dev, char *buf) +{ + return snprintf(buf, sizeof(DWC_DRIVER_VERSION)+2, "%s\n", + DWC_DRIVER_VERSION); +} +static DRIVER_ATTR(version, S_IRUGO, version_show, NULL); + +/** + * Global Debug Level Mask. + */ +uint32_t g_dbg_lvl = 0; /* OFF */ + +/** + * This function shows the driver Debug Level. + */ +static ssize_t dbg_level_show(struct device_driver *drv, char *buf) +{ + return sprintf(buf, "0x%0x\n", g_dbg_lvl); +} + +/** + * This function stores the driver Debug Level. + */ +static ssize_t dbg_level_store(struct device_driver *drv, const char *buf, + size_t count) +{ + g_dbg_lvl = simple_strtoul(buf, NULL, 16); + return count; +} +static DRIVER_ATTR(debuglevel, S_IRUGO|S_IWUSR, dbg_level_show, dbg_level_store); + +/** + * This function is called during module intialization to verify that + * the module parameters are in a valid state. + */ +static int check_parameters(dwc_otg_core_if_t *core_if) +{ + int i; + int retval = 0; + +/* Checks if the parameter is outside of its valid range of values */ +#define DWC_OTG_PARAM_TEST(_param_, _low_, _high_) \ + ((dwc_otg_module_params._param_ < (_low_)) || \ + (dwc_otg_module_params._param_ > (_high_))) + +/* If the parameter has been set by the user, check that the parameter value is + * within the value range of values. If not, report a module error. */ +#define DWC_OTG_PARAM_ERR(_param_, _low_, _high_, _string_) \ + do { \ + if (dwc_otg_module_params._param_ != -1) { \ + if (DWC_OTG_PARAM_TEST(_param_, (_low_), (_high_))) { \ + DWC_ERROR("`%d' invalid for parameter `%s'\n", \ + dwc_otg_module_params._param_, _string_); \ + dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \ + retval++; \ + } \ + } \ + } while (0) + + DWC_OTG_PARAM_ERR(opt,0,1,"opt"); + DWC_OTG_PARAM_ERR(otg_cap,0,2,"otg_cap"); + DWC_OTG_PARAM_ERR(dma_enable,0,1,"dma_enable"); + DWC_OTG_PARAM_ERR(dma_desc_enable,0,1,"dma_desc_enable"); + DWC_OTG_PARAM_ERR(speed,0,1,"speed"); + DWC_OTG_PARAM_ERR(host_support_fs_ls_low_power,0,1,"host_support_fs_ls_low_power"); + DWC_OTG_PARAM_ERR(host_ls_low_power_phy_clk,0,1,"host_ls_low_power_phy_clk"); + DWC_OTG_PARAM_ERR(enable_dynamic_fifo,0,1,"enable_dynamic_fifo"); + DWC_OTG_PARAM_ERR(data_fifo_size,32,32768,"data_fifo_size"); + DWC_OTG_PARAM_ERR(dev_rx_fifo_size,16,32768,"dev_rx_fifo_size"); + DWC_OTG_PARAM_ERR(dev_nperio_tx_fifo_size,16,32768,"dev_nperio_tx_fifo_size"); + DWC_OTG_PARAM_ERR(host_rx_fifo_size,16,32768,"host_rx_fifo_size"); + DWC_OTG_PARAM_ERR(host_nperio_tx_fifo_size,16,32768,"host_nperio_tx_fifo_size"); + DWC_OTG_PARAM_ERR(host_perio_tx_fifo_size,16,32768,"host_perio_tx_fifo_size"); + DWC_OTG_PARAM_ERR(max_transfer_size,2047,524288,"max_transfer_size"); + DWC_OTG_PARAM_ERR(max_packet_count,15,511,"max_packet_count"); + DWC_OTG_PARAM_ERR(host_channels,1,16,"host_channels"); + DWC_OTG_PARAM_ERR(dev_endpoints,1,15,"dev_endpoints"); + DWC_OTG_PARAM_ERR(phy_type,0,2,"phy_type"); + DWC_OTG_PARAM_ERR(phy_ulpi_ddr,0,1,"phy_ulpi_ddr"); + DWC_OTG_PARAM_ERR(phy_ulpi_ext_vbus,0,1,"phy_ulpi_ext_vbus"); + DWC_OTG_PARAM_ERR(i2c_enable,0,1,"i2c_enable"); + DWC_OTG_PARAM_ERR(ulpi_fs_ls,0,1,"ulpi_fs_ls"); + DWC_OTG_PARAM_ERR(ts_dline,0,1,"ts_dline"); + + if (dwc_otg_module_params.dma_burst_size != -1) { + if (DWC_OTG_PARAM_TEST(dma_burst_size,1,1) && + DWC_OTG_PARAM_TEST(dma_burst_size,4,4) && + DWC_OTG_PARAM_TEST(dma_burst_size,8,8) && + DWC_OTG_PARAM_TEST(dma_burst_size,16,16) && + DWC_OTG_PARAM_TEST(dma_burst_size,32,32) && + DWC_OTG_PARAM_TEST(dma_burst_size,64,64) && + DWC_OTG_PARAM_TEST(dma_burst_size,128,128) && + DWC_OTG_PARAM_TEST(dma_burst_size,256,256)) { + DWC_ERROR("`%d' invalid for parameter `dma_burst_size'\n", + dwc_otg_module_params.dma_burst_size); + dwc_otg_module_params.dma_burst_size = 32; + retval++; + } + + { + uint8_t brst_sz = 0; + while(dwc_otg_module_params.dma_burst_size > 1) { + brst_sz ++; + dwc_otg_module_params.dma_burst_size >>= 1; + } + dwc_otg_module_params.dma_burst_size = brst_sz; + } + } + + if (dwc_otg_module_params.phy_utmi_width != -1) { + if (DWC_OTG_PARAM_TEST(phy_utmi_width, 8, 8) && + DWC_OTG_PARAM_TEST(phy_utmi_width, 16, 16)) { + DWC_ERROR("`%d' invalid for parameter `phy_utmi_width'\n", + dwc_otg_module_params.phy_utmi_width); + dwc_otg_module_params.phy_utmi_width = 16; + retval++; + } + } + + for (i = 0; i < 15; i++) { + /** @todo should be like above */ + //DWC_OTG_PARAM_ERR(dev_perio_tx_fifo_size[i], 4, 768, "dev_perio_tx_fifo_size"); + if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] != -1) { + if (DWC_OTG_PARAM_TEST(dev_perio_tx_fifo_size[i], 4, 768)) { + DWC_ERROR("`%d' invalid for parameter `%s_%d'\n", + dwc_otg_module_params.dev_perio_tx_fifo_size[i], "dev_perio_tx_fifo_size", i); + dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default; + retval++; + } + } + } + + DWC_OTG_PARAM_ERR(en_multiple_tx_fifo, 0, 1, "en_multiple_tx_fifo"); + + for (i = 0; i < 15; i++) { + /** @todo should be like above */ + //DWC_OTG_PARAM_ERR(dev_tx_fifo_size[i], 4, 768, "dev_tx_fifo_size"); + if (dwc_otg_module_params.dev_tx_fifo_size[i] != -1) { + if (DWC_OTG_PARAM_TEST(dev_tx_fifo_size[i], 4, 768)) { + DWC_ERROR("`%d' invalid for parameter `%s_%d'\n", + dwc_otg_module_params.dev_tx_fifo_size[i], "dev_tx_fifo_size", i); + dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_param_dev_tx_fifo_size_default; + retval++; + } + } + } + + DWC_OTG_PARAM_ERR(thr_ctl, 0, 7, "thr_ctl"); + DWC_OTG_PARAM_ERR(tx_thr_length, 8, 128, "tx_thr_length"); + DWC_OTG_PARAM_ERR(rx_thr_length, 8, 128, "rx_thr_length"); + + DWC_OTG_PARAM_ERR(pti_enable,0,1,"pti_enable"); + DWC_OTG_PARAM_ERR(mpi_enable,0,1,"mpi_enable"); + + /* At this point, all module parameters that have been set by the user + * are valid, and those that have not are left unset. Now set their + * default values and/or check the parameters against the hardware + * configurations of the OTG core. */ + +/* This sets the parameter to the default value if it has not been set by the + * user */ +#define DWC_OTG_PARAM_SET_DEFAULT(_param_) \ + ({ \ + int changed = 1; \ + if (dwc_otg_module_params._param_ == -1) { \ + changed = 0; \ + dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \ + } \ + changed; \ + }) + +/* This checks the macro agains the hardware configuration to see if it is + * valid. It is possible that the default value could be invalid. In this + * case, it will report a module error if the user touched the parameter. + * Otherwise it will adjust the value without any error. */ +#define DWC_OTG_PARAM_CHECK_VALID(_param_, _str_, _is_valid_, _set_valid_) \ + ({ \ + int changed = DWC_OTG_PARAM_SET_DEFAULT(_param_); \ + int error = 0; \ + if (!(_is_valid_)) { \ + if (changed) { \ + DWC_ERROR("`%d' invalid for parameter `%s'. Check HW configuration.\n", dwc_otg_module_params._param_, _str_); \ + error = 1; \ + } \ + dwc_otg_module_params._param_ = (_set_valid_); \ + } \ + error; \ + }) + + /* OTG Cap */ + retval += DWC_OTG_PARAM_CHECK_VALID(otg_cap, "otg_cap", + ({ + int valid; + valid = 1; + switch (dwc_otg_module_params.otg_cap) { + case DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE: + if (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) + valid = 0; + break; + case DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE: + if ((core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) && + (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) && + (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) && + (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) { + valid = 0; + } + break; + case DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE: + /* always valid */ + break; + } + valid; + }), + (((core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) || + (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) || + (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) || + (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) ? + DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE : + DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE)); + + retval += DWC_OTG_PARAM_CHECK_VALID(dma_enable, "dma_enable", + ((dwc_otg_module_params.dma_enable == 1) && (core_if->hwcfg2.b.architecture == 0)) ? 0 : 1, + 0); + + retval += DWC_OTG_PARAM_CHECK_VALID(dma_desc_enable, "dma_desc_enable", + ((dwc_otg_module_params.dma_desc_enable == 1) && + ((dwc_otg_module_params.dma_enable == 0) || (core_if->hwcfg4.b.desc_dma == 0))) ? 0 : 1, + 0); + + retval += DWC_OTG_PARAM_CHECK_VALID(opt, "opt", 1, 0); + + DWC_OTG_PARAM_SET_DEFAULT(dma_burst_size); + + retval += DWC_OTG_PARAM_CHECK_VALID(host_support_fs_ls_low_power, + "host_support_fs_ls_low_power", + 1, 0); + + retval += DWC_OTG_PARAM_CHECK_VALID(enable_dynamic_fifo, + "enable_dynamic_fifo", + ((dwc_otg_module_params.enable_dynamic_fifo == 0) || + (core_if->hwcfg2.b.dynamic_fifo == 1)), 0); + + retval += DWC_OTG_PARAM_CHECK_VALID(data_fifo_size, + "data_fifo_size", + (dwc_otg_module_params.data_fifo_size <= core_if->hwcfg3.b.dfifo_depth), + core_if->hwcfg3.b.dfifo_depth); + + retval += DWC_OTG_PARAM_CHECK_VALID(dev_rx_fifo_size, + "dev_rx_fifo_size", + (dwc_otg_module_params.dev_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)), + dwc_read_reg32(&core_if->core_global_regs->grxfsiz)); + + retval += DWC_OTG_PARAM_CHECK_VALID(dev_nperio_tx_fifo_size, + "dev_nperio_tx_fifo_size", + (dwc_otg_module_params.dev_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)), + (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)); + + retval += DWC_OTG_PARAM_CHECK_VALID(host_rx_fifo_size, + "host_rx_fifo_size", + (dwc_otg_module_params.host_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)), + dwc_read_reg32(&core_if->core_global_regs->grxfsiz)); + + retval += DWC_OTG_PARAM_CHECK_VALID(host_nperio_tx_fifo_size, + "host_nperio_tx_fifo_size", + (dwc_otg_module_params.host_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)), + (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)); + + retval += DWC_OTG_PARAM_CHECK_VALID(host_perio_tx_fifo_size, + "host_perio_tx_fifo_size", + (dwc_otg_module_params.host_perio_tx_fifo_size <= ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16))), + ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16))); + + retval += DWC_OTG_PARAM_CHECK_VALID(max_transfer_size, + "max_transfer_size", + (dwc_otg_module_params.max_transfer_size < (1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11))), + ((1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11)) - 1)); + + retval += DWC_OTG_PARAM_CHECK_VALID(max_packet_count, + "max_packet_count", + (dwc_otg_module_params.max_packet_count < (1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4))), + ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1)); + + retval += DWC_OTG_PARAM_CHECK_VALID(host_channels, + "host_channels", + (dwc_otg_module_params.host_channels <= (core_if->hwcfg2.b.num_host_chan + 1)), + (core_if->hwcfg2.b.num_host_chan + 1)); + + retval += DWC_OTG_PARAM_CHECK_VALID(dev_endpoints, + "dev_endpoints", + (dwc_otg_module_params.dev_endpoints <= (core_if->hwcfg2.b.num_dev_ep)), + core_if->hwcfg2.b.num_dev_ep); + +/* + * Define the following to disable the FS PHY Hardware checking. This is for + * internal testing only. + * + * #define NO_FS_PHY_HW_CHECKS + */ + +#ifdef NO_FS_PHY_HW_CHECKS + retval += DWC_OTG_PARAM_CHECK_VALID(phy_type, + "phy_type", 1, 0); +#else + retval += DWC_OTG_PARAM_CHECK_VALID(phy_type, + "phy_type", + ({ + int valid = 0; + if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_UTMI) && + ((core_if->hwcfg2.b.hs_phy_type == 1) || + (core_if->hwcfg2.b.hs_phy_type == 3))) { + valid = 1; + } + else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_ULPI) && + ((core_if->hwcfg2.b.hs_phy_type == 2) || + (core_if->hwcfg2.b.hs_phy_type == 3))) { + valid = 1; + } + else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) && + (core_if->hwcfg2.b.fs_phy_type == 1)) { + valid = 1; + } + valid; + }), + ({ + int set = DWC_PHY_TYPE_PARAM_FS; + if (core_if->hwcfg2.b.hs_phy_type) { + if ((core_if->hwcfg2.b.hs_phy_type == 3) || + (core_if->hwcfg2.b.hs_phy_type == 1)) { + set = DWC_PHY_TYPE_PARAM_UTMI; + } + else { + set = DWC_PHY_TYPE_PARAM_ULPI; + } + } + set; + })); +#endif + + retval += DWC_OTG_PARAM_CHECK_VALID(speed, "speed", + (dwc_otg_module_params.speed == 0) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1, + dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS ? 1 : 0); + + retval += DWC_OTG_PARAM_CHECK_VALID(host_ls_low_power_phy_clk, + "host_ls_low_power_phy_clk", + ((dwc_otg_module_params.host_ls_low_power_phy_clk == DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1), + ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ : DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ)); + + DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ddr); + DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ext_vbus); + DWC_OTG_PARAM_SET_DEFAULT(phy_utmi_width); + DWC_OTG_PARAM_SET_DEFAULT(ulpi_fs_ls); + DWC_OTG_PARAM_SET_DEFAULT(ts_dline); + +#ifdef NO_FS_PHY_HW_CHECKS + retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable, "i2c_enable", 1, 0); +#else + retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable, + "i2c_enable", + (dwc_otg_module_params.i2c_enable == 1) && (core_if->hwcfg3.b.i2c == 0) ? 0 : 1, + 0); +#endif + + for (i = 0; i < 15; i++) { + int changed = 1; + int error = 0; + + if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] == -1) { + changed = 0; + dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default; + } + if (!(dwc_otg_module_params.dev_perio_tx_fifo_size[i] <= (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) { + if (changed) { + DWC_ERROR("`%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", dwc_otg_module_params.dev_perio_tx_fifo_size[i], i); + error = 1; + } + dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]); + } + retval += error; + } + + retval += DWC_OTG_PARAM_CHECK_VALID(en_multiple_tx_fifo, "en_multiple_tx_fifo", + ((dwc_otg_module_params.en_multiple_tx_fifo == 1) && (core_if->hwcfg4.b.ded_fifo_en == 0)) ? 0 : 1, + 0); + + for (i = 0; i < 15; i++) { + int changed = 1; + int error = 0; + + if (dwc_otg_module_params.dev_tx_fifo_size[i] == -1) { + changed = 0; + dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_param_dev_tx_fifo_size_default; + } + if (!(dwc_otg_module_params.dev_tx_fifo_size[i] <= (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) { + if (changed) { + DWC_ERROR("%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", dwc_otg_module_params.dev_tx_fifo_size[i], i); + error = 1; + } + dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]); + } + retval += error; + } + + retval += DWC_OTG_PARAM_CHECK_VALID(thr_ctl, "thr_ctl", + ((dwc_otg_module_params.thr_ctl != 0) && ((dwc_otg_module_params.dma_enable == 0) || (core_if->hwcfg4.b.ded_fifo_en == 0))) ? 0 : 1, + 0); + + DWC_OTG_PARAM_SET_DEFAULT(tx_thr_length); + DWC_OTG_PARAM_SET_DEFAULT(rx_thr_length); + + retval += DWC_OTG_PARAM_CHECK_VALID(pti_enable, "pti_enable", + ((dwc_otg_module_params.pti_enable == 0) || ((dwc_otg_module_params.pti_enable == 1) && (core_if->snpsid >= 0x4F54272A))) ? 1 : 0, + 0); + + retval += DWC_OTG_PARAM_CHECK_VALID(mpi_enable, "mpi_enable", + ((dwc_otg_module_params.mpi_enable == 0) || ((dwc_otg_module_params.mpi_enable == 1) && (core_if->hwcfg2.b.multi_proc_int == 1))) ? 1 : 0, + 0); + return retval; +} + +/** + * This function is the top level interrupt handler for the Common + * (Device and host modes) interrupts. + */ +static irqreturn_t dwc_otg_common_irq(int irq, void *dev +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) + , struct pt_regs *r +#endif + ) +{ + dwc_otg_device_t *otg_dev = dev; + int32_t retval = IRQ_NONE; + + retval = dwc_otg_handle_common_intr(otg_dev->core_if); + return IRQ_RETVAL(retval); +} + +/** + * This function is called when a platform_device is unregistered with the + * dwc_otg_driver. This happens, for example, when the rmmod command is + * executed. The device may or may not be electrically present. If it is + * present, the driver stops device processing. Any resources used on behalf + * of this device are freed. + * + * @param[in] pdev + */ +static int dwc_otg_driver_remove(struct platform_device *pdev) +{ + dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev); + DWC_DEBUGPL(DBG_ANY, "%s(%p)\n", __func__, pdev); + + if (!otg_dev) { + /* Memory allocation for the dwc_otg_device failed. */ + DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__); + return 0; + } + + /* + * Free the IRQ + */ + if (otg_dev->common_irq_installed) { + free_irq(otg_dev->irq, otg_dev); + } + +#ifndef DWC_DEVICE_ONLY + if (otg_dev->hcd) { + dwc_otg_hcd_remove(&pdev->dev); + } else { + DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__); + return 0; + } +#endif + +#ifndef DWC_HOST_ONLY + if (otg_dev->pcd) { + dwc_otg_pcd_remove(&pdev->dev); + } +#endif + if (otg_dev->core_if) { + dwc_otg_cil_remove(otg_dev->core_if); + } + + /* + * Remove the device attributes + */ + dwc_otg_attr_remove(otg_dev->parent); + + /* Disable USB port */ + dwc_write_reg32((uint32_t *)((uint8_t *)otg_dev->base + 0xe00), 0xf); + + /* + * Return the memory. + */ + if (otg_dev->base) { + iounmap(otg_dev->base); + } + + if (otg_dev->phys_addr != 0) { + release_mem_region(otg_dev->phys_addr, otg_dev->base_len); + } + + kfree(otg_dev); + + /* + * Clear the drvdata pointer. + */ + platform_set_drvdata(pdev, NULL); + + return 0; +} + +/** + * This function is called when an platform_device is bound to a + * dwc_otg_driver. It creates the driver components required to + * control the device (CIL, HCD, and PCD) and it initializes the + * device. The driver components are stored in a dwc_otg_device + * structure. A reference to the dwc_otg_device is saved in the + * platform_device. This allows the driver to access the dwc_otg_device + * structure on subsequent calls to driver methods for this device. + * + * @param[in] pdev platform_device definition + */ +static int dwc_otg_driver_probe(struct platform_device *pdev) +{ + int retval = 0; + uint32_t snpsid; + dwc_otg_device_t *otg_dev; + struct resource *res; + + dev_dbg(&pdev->dev, "dwc_otg_driver_probe(%p)\n", pdev); + + otg_dev= kzalloc(sizeof(dwc_otg_device_t), GFP_KERNEL); + if (!otg_dev) { + dev_err(&pdev->dev, "kmalloc of dwc_otg_device failed\n"); + retval = -ENOMEM; + goto fail; + } + + otg_dev->reg_offset = 0xFFFFFFFF; + + /* + * Retrieve the memory and IRQ resources. + */ + otg_dev->irq = platform_get_irq(pdev, 0); + if (otg_dev->irq <= 0) { + dev_err(&pdev->dev, "no device irq\n"); + retval = -EINVAL; + goto fail; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "no CSR address\n"); + retval = -EINVAL; + goto fail; + } + + otg_dev->parent = &pdev->dev; + otg_dev->phys_addr = res->start; + otg_dev->base_len = res->end - res->start + 1; + if (request_mem_region(otg_dev->phys_addr, + otg_dev->base_len, + dwc_driver_name) == NULL) { + dev_err(&pdev->dev, "request_mem_region failed\n"); + retval = -EBUSY; + goto fail; + } + + /* + * Map the DWC_otg Core memory into virtual address space. + */ + otg_dev->base = ioremap(otg_dev->phys_addr, otg_dev->base_len); + if (!otg_dev->base) { + dev_err(&pdev->dev, "ioremap() failed\n"); + retval = -ENOMEM; + goto fail; + } + dev_dbg(&pdev->dev, "mapped base=0x%08x\n", (unsigned) otg_dev->base); + + /* Enable USB Port */ + dwc_write_reg32((uint32_t *)((uint8_t *)otg_dev->base + 0xe00), 0); + + /* + * Attempt to ensure this device is really a DWC_otg Controller. + * Read and verify the SNPSID register contents. The value should be + * 0x45F42XXX, which corresponds to "OT2", as in "OTG version 2.XX". + */ + snpsid = dwc_read_reg32((uint32_t *)((uint8_t *)otg_dev->base + 0x40)); + + if ((snpsid & 0xFFFFF000) != OTG_CORE_REV_2_00) { + dev_err(&pdev->dev, "Bad value for SNPSID: 0x%08x\n", snpsid); + retval = -EINVAL; + goto fail; + } + + DWC_PRINT("Core Release: %x.%x%x%x\n", + (snpsid >> 12 & 0xF), + (snpsid >> 8 & 0xF), + (snpsid >> 4 & 0xF), + (snpsid & 0xF)); + + /* + * Initialize driver data to point to the global DWC_otg + * Device structure. + */ + platform_set_drvdata(pdev, otg_dev); + dev_dbg(&pdev->dev, "dwc_otg_device=0x%p\n", otg_dev); + + + otg_dev->core_if = dwc_otg_cil_init(otg_dev->base, + &dwc_otg_module_params); + + otg_dev->core_if->snpsid = snpsid; + + if (!otg_dev->core_if) { + dev_err(&pdev->dev, "CIL initialization failed!\n"); + retval = -ENOMEM; + goto fail; + } + + /* + * Validate parameter values. + */ + if (check_parameters(otg_dev->core_if)) { + retval = -EINVAL; + goto fail; + } + + /* + * Create Device Attributes in sysfs + */ + dwc_otg_attr_create(&pdev->dev); + + /* + * Disable the global interrupt until all the interrupt + * handlers are installed. + */ + dwc_otg_disable_global_interrupts(otg_dev->core_if); + + /* + * Install the interrupt handler for the common interrupts before + * enabling common interrupts in core_init below. + */ + DWC_DEBUGPL(DBG_CIL, "registering (common) handler for irq%d\n", + otg_dev->irq); + retval = request_irq(otg_dev->irq, dwc_otg_common_irq, + IRQF_SHARED, "dwc_otg", otg_dev); + if (retval) { + DWC_ERROR("request of irq%d failed\n", otg_dev->irq); + retval = -EBUSY; + goto fail; + } else { + otg_dev->common_irq_installed = 1; + } + + /* + * Initialize the DWC_otg core. + */ + dwc_otg_core_init(otg_dev->core_if); + +#ifndef DWC_HOST_ONLY + /* + * Initialize the PCD + */ + retval = dwc_otg_pcd_init(&pdev->dev); + if (retval != 0) { + DWC_ERROR("dwc_otg_pcd_init failed\n"); + otg_dev->pcd = NULL; + goto fail; + } +#endif +#ifndef DWC_DEVICE_ONLY + /* + * Initialize the HCD + */ + retval = dwc_otg_hcd_init(&pdev->dev); + if (retval != 0) { + DWC_ERROR("dwc_otg_hcd_init failed\n"); + otg_dev->hcd = NULL; + goto fail; + } +#endif + + /* + * Enable the global interrupt after all the interrupt + * handlers are installed. + */ + dwc_otg_enable_global_interrupts(otg_dev->core_if); + + return 0; + + fail: + dwc_otg_driver_remove(pdev); + return retval; +} + +/** + * This structure defines the methods to be called by a bus driver + * during the lifecycle of a device on that bus. Both drivers and + * devices are registered with a bus driver. The bus driver matches + * devices to drivers based on information in the device and driver + * structures. + * + * The probe function is called when the bus driver matches a device + * to this driver. The remove function is called when a device is + * unregistered with the bus driver. + */ +static struct platform_driver dwc_otg_driver = { + .driver = { + .name = (char *)dwc_driver_name, + }, + .probe = dwc_otg_driver_probe, + .remove = dwc_otg_driver_remove, +}; + +/** + * This function is called when the dwc_otg_driver is installed with the + * insmod command. It registers the dwc_otg_driver structure with the + * appropriate bus driver. This will cause the dwc_otg_driver_probe function + * to be called. In addition, the bus driver will automatically expose + * attributes defined for the device and driver in the special sysfs file + * system. + * + * @return + */ +static int __init dwc_otg_driver_init(void) +{ + int retval = 0; + int error; + + printk(KERN_INFO "%s: version %s\n", dwc_driver_name, DWC_DRIVER_VERSION); + + retval = platform_driver_register(&dwc_otg_driver); + if (retval) { + printk(KERN_ERR "%s retval=%d\n", __func__, retval); + return retval; + } + + error = driver_create_file(&dwc_otg_driver.driver, &driver_attr_version); + error = driver_create_file(&dwc_otg_driver.driver, &driver_attr_debuglevel); + + return retval; +} +module_init(dwc_otg_driver_init); + +/** + * This function is called when the driver is removed from the kernel + * with the rmmod command. The driver unregisters itself with its bus + * driver. + * + */ +static void __exit dwc_otg_driver_cleanup(void) +{ + printk(KERN_DEBUG "dwc_otg_driver_cleanup()\n"); + + driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel); + driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version); + + platform_driver_unregister(&dwc_otg_driver); + + printk(KERN_INFO "%s module removed\n", dwc_driver_name); +} +module_exit(dwc_otg_driver_cleanup); + +MODULE_DESCRIPTION(DWC_DRIVER_DESC); +MODULE_AUTHOR("Synopsys Inc."); +MODULE_LICENSE("GPL"); + +module_param_named(otg_cap, dwc_otg_module_params.otg_cap, int, 0444); +MODULE_PARM_DESC(otg_cap, "OTG Capabilities 0=HNP&SRP 1=SRP Only 2=None"); +module_param_named(opt, dwc_otg_module_params.opt, int, 0444); +MODULE_PARM_DESC(opt, "OPT Mode"); +module_param_named(dma_enable, dwc_otg_module_params.dma_enable, int, 0444); +MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled"); + +module_param_named(dma_desc_enable, dwc_otg_module_params.dma_desc_enable, int, 0444); +MODULE_PARM_DESC(dma_desc_enable, "DMA Desc Mode 0=Address DMA 1=DMA Descriptor enabled"); + +module_param_named(dma_burst_size, dwc_otg_module_params.dma_burst_size, int, 0444); +MODULE_PARM_DESC(dma_burst_size, "DMA Burst Size 1, 4, 8, 16, 32, 64, 128, 256"); +module_param_named(speed, dwc_otg_module_params.speed, int, 0444); +MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed"); +module_param_named(host_support_fs_ls_low_power, dwc_otg_module_params.host_support_fs_ls_low_power, int, 0444); +MODULE_PARM_DESC(host_support_fs_ls_low_power, "Support Low Power w/FS or LS 0=Support 1=Don't Support"); +module_param_named(host_ls_low_power_phy_clk, dwc_otg_module_params.host_ls_low_power_phy_clk, int, 0444); +MODULE_PARM_DESC(host_ls_low_power_phy_clk, "Low Speed Low Power Clock 0=48Mhz 1=6Mhz"); +module_param_named(enable_dynamic_fifo, dwc_otg_module_params.enable_dynamic_fifo, int, 0444); +MODULE_PARM_DESC(enable_dynamic_fifo, "0=cC Setting 1=Allow Dynamic Sizing"); +module_param_named(data_fifo_size, dwc_otg_module_params.data_fifo_size, int, 0444); +MODULE_PARM_DESC(data_fifo_size, "Total number of words in the data FIFO memory 32-32768"); +module_param_named(dev_rx_fifo_size, dwc_otg_module_params.dev_rx_fifo_size, int, 0444); +MODULE_PARM_DESC(dev_rx_fifo_size, "Number of words in the Rx FIFO 16-32768"); +module_param_named(dev_nperio_tx_fifo_size, dwc_otg_module_params.dev_nperio_tx_fifo_size, int, 0444); +MODULE_PARM_DESC(dev_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768"); +module_param_named(dev_perio_tx_fifo_size_1, dwc_otg_module_params.dev_perio_tx_fifo_size[0], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_1, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_2, dwc_otg_module_params.dev_perio_tx_fifo_size[1], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_2, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_3, dwc_otg_module_params.dev_perio_tx_fifo_size[2], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_3, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_4, dwc_otg_module_params.dev_perio_tx_fifo_size[3], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_4, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_5, dwc_otg_module_params.dev_perio_tx_fifo_size[4], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_5, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_6, dwc_otg_module_params.dev_perio_tx_fifo_size[5], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_6, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_7, dwc_otg_module_params.dev_perio_tx_fifo_size[6], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_7, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_8, dwc_otg_module_params.dev_perio_tx_fifo_size[7], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_8, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_9, dwc_otg_module_params.dev_perio_tx_fifo_size[8], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_9, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_10, dwc_otg_module_params.dev_perio_tx_fifo_size[9], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_10, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_11, dwc_otg_module_params.dev_perio_tx_fifo_size[10], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_11, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_12, dwc_otg_module_params.dev_perio_tx_fifo_size[11], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_12, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_13, dwc_otg_module_params.dev_perio_tx_fifo_size[12], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_13, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_14, dwc_otg_module_params.dev_perio_tx_fifo_size[13], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_14, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(dev_perio_tx_fifo_size_15, dwc_otg_module_params.dev_perio_tx_fifo_size[14], int, 0444); +MODULE_PARM_DESC(dev_perio_tx_fifo_size_15, "Number of words in the periodic Tx FIFO 4-768"); +module_param_named(host_rx_fifo_size, dwc_otg_module_params.host_rx_fifo_size, int, 0444); +MODULE_PARM_DESC(host_rx_fifo_size, "Number of words in the Rx FIFO 16-32768"); +module_param_named(host_nperio_tx_fifo_size, dwc_otg_module_params.host_nperio_tx_fifo_size, int, 0444); +MODULE_PARM_DESC(host_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768"); +module_param_named(host_perio_tx_fifo_size, dwc_otg_module_params.host_perio_tx_fifo_size, int, 0444); +MODULE_PARM_DESC(host_perio_tx_fifo_size, "Number of words in the host periodic Tx FIFO 16-32768"); +module_param_named(max_transfer_size, dwc_otg_module_params.max_transfer_size, int, 0444); +/** @todo Set the max to 512K, modify checks */ +MODULE_PARM_DESC(max_transfer_size, "The maximum transfer size supported in bytes 2047-65535"); +module_param_named(max_packet_count, dwc_otg_module_params.max_packet_count, int, 0444); +MODULE_PARM_DESC(max_packet_count, "The maximum number of packets in a transfer 15-511"); +module_param_named(host_channels, dwc_otg_module_params.host_channels, int, 0444); +MODULE_PARM_DESC(host_channels, "The number of host channel registers to use 1-16"); +module_param_named(dev_endpoints, dwc_otg_module_params.dev_endpoints, int, 0444); +MODULE_PARM_DESC(dev_endpoints, "The number of endpoints in addition to EP0 available for device mode 1-15"); +module_param_named(phy_type, dwc_otg_module_params.phy_type, int, 0444); +MODULE_PARM_DESC(phy_type, "0=Reserved 1=UTMI+ 2=ULPI"); +module_param_named(phy_utmi_width, dwc_otg_module_params.phy_utmi_width, int, 0444); +MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits"); +module_param_named(phy_ulpi_ddr, dwc_otg_module_params.phy_ulpi_ddr, int, 0444); +MODULE_PARM_DESC(phy_ulpi_ddr, "ULPI at double or single data rate 0=Single 1=Double"); +module_param_named(phy_ulpi_ext_vbus, dwc_otg_module_params.phy_ulpi_ext_vbus, int, 0444); +MODULE_PARM_DESC(phy_ulpi_ext_vbus, "ULPI PHY using internal or external vbus 0=Internal"); +module_param_named(i2c_enable, dwc_otg_module_params.i2c_enable, int, 0444); +MODULE_PARM_DESC(i2c_enable, "FS PHY Interface"); +module_param_named(ulpi_fs_ls, dwc_otg_module_params.ulpi_fs_ls, int, 0444); +MODULE_PARM_DESC(ulpi_fs_ls, "ULPI PHY FS/LS mode only"); +module_param_named(ts_dline, dwc_otg_module_params.ts_dline, int, 0444); +MODULE_PARM_DESC(ts_dline, "Term select Dline pulsing for all PHYs"); +module_param_named(debug, g_dbg_lvl, int, 0444); +MODULE_PARM_DESC(debug, ""); + +module_param_named(en_multiple_tx_fifo, dwc_otg_module_params.en_multiple_tx_fifo, int, 0444); +MODULE_PARM_DESC(en_multiple_tx_fifo, "Dedicated Non Periodic Tx FIFOs 0=disabled 1=enabled"); +module_param_named(dev_tx_fifo_size_1, dwc_otg_module_params.dev_tx_fifo_size[0], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_1, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_2, dwc_otg_module_params.dev_tx_fifo_size[1], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_2, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_3, dwc_otg_module_params.dev_tx_fifo_size[2], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_3, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_4, dwc_otg_module_params.dev_tx_fifo_size[3], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_4, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_5, dwc_otg_module_params.dev_tx_fifo_size[4], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_5, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_6, dwc_otg_module_params.dev_tx_fifo_size[5], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_6, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_7, dwc_otg_module_params.dev_tx_fifo_size[6], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_7, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_8, dwc_otg_module_params.dev_tx_fifo_size[7], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_8, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_9, dwc_otg_module_params.dev_tx_fifo_size[8], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_9, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_10, dwc_otg_module_params.dev_tx_fifo_size[9], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_10, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_11, dwc_otg_module_params.dev_tx_fifo_size[10], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_11, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_12, dwc_otg_module_params.dev_tx_fifo_size[11], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_12, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_13, dwc_otg_module_params.dev_tx_fifo_size[12], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_13, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_14, dwc_otg_module_params.dev_tx_fifo_size[13], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_14, "Number of words in the Tx FIFO 4-768"); +module_param_named(dev_tx_fifo_size_15, dwc_otg_module_params.dev_tx_fifo_size[14], int, 0444); +MODULE_PARM_DESC(dev_tx_fifo_size_15, "Number of words in the Tx FIFO 4-768"); + +module_param_named(thr_ctl, dwc_otg_module_params.thr_ctl, int, 0444); +MODULE_PARM_DESC(thr_ctl, "Thresholding enable flag bit 0 - non ISO Tx thr., 1 - ISO Tx thr., 2 - Rx thr.- bit 0=disabled 1=enabled"); +module_param_named(tx_thr_length, dwc_otg_module_params.tx_thr_length, int, 0444); +MODULE_PARM_DESC(tx_thr_length, "Tx Threshold length in 32 bit DWORDs"); +module_param_named(rx_thr_length, dwc_otg_module_params.rx_thr_length, int, 0444); +MODULE_PARM_DESC(rx_thr_length, "Rx Threshold length in 32 bit DWORDs"); + +module_param_named(pti_enable, dwc_otg_module_params.pti_enable, int, 0444); +MODULE_PARM_DESC(pti_enable, "Per Transfer Interrupt mode 0=disabled 1=enabled"); + +module_param_named(mpi_enable, dwc_otg_module_params.mpi_enable, int, 0444); +MODULE_PARM_DESC(mpi_enable, "Multiprocessor Interrupt mode 0=disabled 1=enabled"); + +/** @page "Module Parameters" + * + * The following parameters may be specified when starting the module. + * These parameters define how the DWC_otg controller should be + * configured. Parameter values are passed to the CIL initialization + * function dwc_otg_cil_init + * + * Example: <code>modprobe dwc_otg speed=1 otg_cap=1</code> + * + + <table> + <tr><td>Parameter Name</td><td>Meaning</td></tr> + + <tr> + <td>otg_cap</td> + <td>Specifies the OTG capabilities. The driver will automatically detect the + value for this parameter if none is specified. + - 0: HNP and SRP capable (default, if available) + - 1: SRP Only capable + - 2: No HNP/SRP capable + </td></tr> + + <tr> + <td>dma_enable</td> + <td>Specifies whether to use slave or DMA mode for accessing the data FIFOs. + The driver will automatically detect the value for this parameter if none is + specified. + - 0: Slave + - 1: DMA (default, if available) + </td></tr> + + <tr> + <td>dma_burst_size</td> + <td>The DMA Burst size (applicable only for External DMA Mode). + - Values: 1, 4, 8 16, 32, 64, 128, 256 (default 32) + </td></tr> + + <tr> + <td>speed</td> + <td>Specifies the maximum speed of operation in host and device mode. The + actual speed depends on the speed of the attached device and the value of + phy_type. + - 0: High Speed (default) + - 1: Full Speed + </td></tr> + + <tr> + <td>host_support_fs_ls_low_power</td> + <td>Specifies whether low power mode is supported when attached to a Full + Speed or Low Speed device in host mode. + - 0: Don't support low power mode (default) + - 1: Support low power mode + </td></tr> + + <tr> + <td>host_ls_low_power_phy_clk</td> + <td>Specifies the PHY clock rate in low power mode when connected to a Low + Speed device in host mode. This parameter is applicable only if + HOST_SUPPORT_FS_LS_LOW_POWER is enabled. + - 0: 48 MHz (default) + - 1: 6 MHz + </td></tr> + + <tr> + <td>enable_dynamic_fifo</td> + <td> Specifies whether FIFOs may be resized by the driver software. + - 0: Use cC FIFO size parameters + - 1: Allow dynamic FIFO sizing (default) + </td></tr> + + <tr> + <td>data_fifo_size</td> + <td>Total number of 4-byte words in the data FIFO memory. This memory + includes the Rx FIFO, non-periodic Tx FIFO, and periodic Tx FIFOs. + - Values: 32 to 32768 (default 8192) + + Note: The total FIFO memory depth in the FPGA configuration is 8192. + </td></tr> + + <tr> + <td>dev_rx_fifo_size</td> + <td>Number of 4-byte words in the Rx FIFO in device mode when dynamic + FIFO sizing is enabled. + - Values: 16 to 32768 (default 1064) + </td></tr> + + <tr> + <td>dev_nperio_tx_fifo_size</td> + <td>Number of 4-byte words in the non-periodic Tx FIFO in device mode when + dynamic FIFO sizing is enabled. + - Values: 16 to 32768 (default 1024) + </td></tr> + + <tr> + <td>dev_perio_tx_fifo_size_n (n = 1 to 15)</td> + <td>Number of 4-byte words in each of the periodic Tx FIFOs in device mode + when dynamic FIFO sizing is enabled. + - Values: 4 to 768 (default 256) + </td></tr> + + <tr> + <td>host_rx_fifo_size</td> + <td>Number of 4-byte words in the Rx FIFO in host mode when dynamic FIFO + sizing is enabled. + - Values: 16 to 32768 (default 1024) + </td></tr> + + <tr> + <td>host_nperio_tx_fifo_size</td> + <td>Number of 4-byte words in the non-periodic Tx FIFO in host mode when + dynamic FIFO sizing is enabled in the core. + - Values: 16 to 32768 (default 1024) + </td></tr> + + <tr> + <td>host_perio_tx_fifo_size</td> + <td>Number of 4-byte words in the host periodic Tx FIFO when dynamic FIFO + sizing is enabled. + - Values: 16 to 32768 (default 1024) + </td></tr> + + <tr> + <td>max_transfer_size</td> + <td>The maximum transfer size supported in bytes. + - Values: 2047 to 65,535 (default 65,535) + </td></tr> + + <tr> + <td>max_packet_count</td> + <td>The maximum number of packets in a transfer. + - Values: 15 to 511 (default 511) + </td></tr> + + <tr> + <td>host_channels</td> + <td>The number of host channel registers to use. + - Values: 1 to 16 (default 12) + + Note: The FPGA configuration supports a maximum of 12 host channels. + </td></tr> + + <tr> + <td>dev_endpoints</td> + <td>The number of endpoints in addition to EP0 available for device mode + operations. + - Values: 1 to 15 (default 6 IN and OUT) + + Note: The FPGA configuration supports a maximum of 6 IN and OUT endpoints in + addition to EP0. + </td></tr> + + <tr> + <td>phy_type</td> + <td>Specifies the type of PHY interface to use. By default, the driver will + automatically detect the phy_type. + - 0: Full Speed + - 1: UTMI+ (default, if available) + - 2: ULPI + </td></tr> + + <tr> + <td>phy_utmi_width</td> + <td>Specifies the UTMI+ Data Width. This parameter is applicable for a + phy_type of UTMI+. Also, this parameter is applicable only if the + OTG_HSPHY_WIDTH cC parameter was set to "8 and 16 bits", meaning that the + core has been configured to work at either data path width. + - Values: 8 or 16 bits (default 16) + </td></tr> + + <tr> + <td>phy_ulpi_ddr</td> + <td>Specifies whether the ULPI operates at double or single data rate. This + parameter is only applicable if phy_type is ULPI. + - 0: single data rate ULPI interface with 8 bit wide data bus (default) + - 1: double data rate ULPI interface with 4 bit wide data bus + </td></tr> + + <tr> + <td>i2c_enable</td> + <td>Specifies whether to use the I2C interface for full speed PHY. This + parameter is only applicable if PHY_TYPE is FS. + - 0: Disabled (default) + - 1: Enabled + </td></tr> + + <tr> + <td>otg_en_multiple_tx_fifo</td> + <td>Specifies whether dedicatedto tx fifos are enabled for non periodic IN EPs. + The driver will automatically detect the value for this parameter if none is + specified. + - 0: Disabled + - 1: Enabled (default, if available) + </td></tr> + + <tr> + <td>dev_tx_fifo_size_n (n = 1 to 15)</td> + <td>Number of 4-byte words in each of the Tx FIFOs in device mode + when dynamic FIFO sizing is enabled. + - Values: 4 to 768 (default 256) + </td></tr> + +*/ diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_driver.h b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_driver.h new file mode 100644 index 0000000000..fd7f0a4b9d --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_driver.h @@ -0,0 +1,83 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.h $ + * $Revision: 1.2 $ + * $Date: 2008-11-21 05:39:15 $ + * $Change: 1064918 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + +#ifndef __DWC_OTG_DRIVER_H__ +#define __DWC_OTG_DRIVER_H__ + +/** @file + * This file contains the interface to the Linux driver. + */ +#include "dwc_otg_cil.h" + +/* Type declarations */ +struct dwc_otg_pcd; +struct dwc_otg_hcd; + +/** + * This structure is a wrapper that encapsulates the driver components used to + * manage a single DWC_otg controller. + */ +typedef struct dwc_otg_device { + /** Base address returned from ioremap() */ + void *base; + + struct device *parent; + + /** Pointer to the core interface structure. */ + dwc_otg_core_if_t *core_if; + + /** Register offset for Diagnostic API. */ + uint32_t reg_offset; + + /** Pointer to the PCD structure. */ + struct dwc_otg_pcd *pcd; + + /** Pointer to the HCD structure. */ + struct dwc_otg_hcd *hcd; + + /** Flag to indicate whether the common IRQ handler is installed. */ + uint8_t common_irq_installed; + + /* Interrupt request number. */ + unsigned int irq; + + /* Physical address of Control and Status registers, used by + * release_mem_region(). + */ + resource_size_t phys_addr; + + /* Length of memory region, used by release_mem_region(). */ + unsigned long base_len; +} dwc_otg_device_t; + +#endif diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd.c b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd.c new file mode 100644 index 0000000000..fe643b6460 --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd.c @@ -0,0 +1,2852 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.c $ + * $Revision: 1.4 $ + * $Date: 2008-11-21 05:39:15 $ + * $Change: 1064940 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ +#ifndef DWC_DEVICE_ONLY + +/** + * @file + * + * This file contains the implementation of the HCD. In Linux, the HCD + * implements the hc_driver API. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/string.h> +#include <linux/dma-mapping.h> +#include <linux/version.h> + +#include "dwc_otg_driver.h" +#include "dwc_otg_hcd.h" +#include "dwc_otg_regs.h" + +static const char dwc_otg_hcd_name[] = "dwc_otg"; + +static const struct hc_driver dwc_otg_hc_driver = { + + .description = dwc_otg_hcd_name, + .product_desc = "DWC OTG Controller", + .hcd_priv_size = sizeof(dwc_otg_hcd_t), + + .irq = dwc_otg_hcd_irq, + + .flags = HCD_MEMORY | HCD_USB2, + + //.reset = + .start = dwc_otg_hcd_start, + //.suspend = + //.resume = + .stop = dwc_otg_hcd_stop, + + .urb_enqueue = dwc_otg_hcd_urb_enqueue, + .urb_dequeue = dwc_otg_hcd_urb_dequeue, + .endpoint_disable = dwc_otg_hcd_endpoint_disable, + + .get_frame_number = dwc_otg_hcd_get_frame_number, + + .hub_status_data = dwc_otg_hcd_hub_status_data, + .hub_control = dwc_otg_hcd_hub_control, + //.hub_suspend = + //.hub_resume = +}; + +/** + * Work queue function for starting the HCD when A-Cable is connected. + * The dwc_otg_hcd_start() must be called in a process context. + */ +static void hcd_start_func( +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + void *_vp +#else + struct work_struct *_work +#endif + ) +{ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + struct usb_hcd *usb_hcd = (struct usb_hcd *)_vp; +#else + struct delayed_work *dw = container_of(_work, struct delayed_work, work); + struct dwc_otg_hcd *otg_hcd = container_of(dw, struct dwc_otg_hcd, start_work); + struct usb_hcd *usb_hcd = container_of((void *)otg_hcd, struct usb_hcd, hcd_priv); +#endif + DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, usb_hcd); + if (usb_hcd) { + dwc_otg_hcd_start(usb_hcd); + } +} + +/** + * HCD Callback function for starting the HCD when A-Cable is + * connected. + * + * @param p void pointer to the <code>struct usb_hcd</code> + */ +static int32_t dwc_otg_hcd_start_cb(void *p) +{ + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(p); + dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; + hprt0_data_t hprt0; + + if (core_if->op_state == B_HOST) { + /* + * Reset the port. During a HNP mode switch the reset + * needs to occur within 1ms and have a duration of at + * least 50ms. + */ + hprt0.d32 = dwc_otg_read_hprt0(core_if); + hprt0.b.prtrst = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + ((struct usb_hcd *)p)->self.is_b_host = 1; + } else { + ((struct usb_hcd *)p)->self.is_b_host = 0; + } + + /* Need to start the HCD in a non-interrupt context. */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + INIT_WORK(&dwc_otg_hcd->start_work, hcd_start_func, p); +// INIT_DELAYED_WORK(&dwc_otg_hcd->start_work, hcd_start_func, p); +#else +// INIT_WORK(&dwc_otg_hcd->start_work, hcd_start_func); + INIT_DELAYED_WORK(&dwc_otg_hcd->start_work, hcd_start_func); +#endif +// schedule_work(&dwc_otg_hcd->start_work); + queue_delayed_work(core_if->wq_otg, &dwc_otg_hcd->start_work, 50 * HZ / 1000); + + return 1; +} + +/** + * HCD Callback function for stopping the HCD. + * + * @param p void pointer to the <code>struct usb_hcd</code> + */ +static int32_t dwc_otg_hcd_stop_cb(void *p) +{ + struct usb_hcd *usb_hcd = (struct usb_hcd *)p; + DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p); + dwc_otg_hcd_stop(usb_hcd); + return 1; +} + +static void del_xfer_timers(dwc_otg_hcd_t *hcd) +{ +#ifdef DEBUG + int i; + int num_channels = hcd->core_if->core_params->host_channels; + for (i = 0; i < num_channels; i++) { + del_timer(&hcd->core_if->hc_xfer_timer[i]); + } +#endif +} + +static void del_timers(dwc_otg_hcd_t *hcd) +{ + del_xfer_timers(hcd); + del_timer(&hcd->conn_timer); +} + +/** + * Processes all the URBs in a single list of QHs. Completes them with + * -ETIMEDOUT and frees the QTD. + */ +static void kill_urbs_in_qh_list(dwc_otg_hcd_t *hcd, struct list_head *qh_list) +{ + struct list_head *qh_item; + dwc_otg_qh_t *qh; + struct list_head *qtd_item; + dwc_otg_qtd_t *qtd; + + list_for_each(qh_item, qh_list) { + qh = list_entry(qh_item, dwc_otg_qh_t, qh_list_entry); + for (qtd_item = qh->qtd_list.next; + qtd_item != &qh->qtd_list; + qtd_item = qh->qtd_list.next) { + qtd = list_entry(qtd_item, dwc_otg_qtd_t, qtd_list_entry); + if (qtd->urb != NULL) { + dwc_otg_hcd_complete_urb(hcd, qtd->urb, + -ETIMEDOUT); + } + dwc_otg_hcd_qtd_remove_and_free(hcd, qtd); + } + } +} + +/** + * Responds with an error status of ETIMEDOUT to all URBs in the non-periodic + * and periodic schedules. The QTD associated with each URB is removed from + * the schedule and freed. This function may be called when a disconnect is + * detected or when the HCD is being stopped. + */ +static void kill_all_urbs(dwc_otg_hcd_t *hcd) +{ + kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_inactive); + kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_active); + kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_inactive); + kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_ready); + kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_assigned); + kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_queued); +} + +/** + * HCD Callback function for disconnect of the HCD. + * + * @param p void pointer to the <code>struct usb_hcd</code> + */ +static int32_t dwc_otg_hcd_disconnect_cb(void *p) +{ + gintsts_data_t intr; + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(p); + + //DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p); + + /* + * Set status flags for the hub driver. + */ + dwc_otg_hcd->flags.b.port_connect_status_change = 1; + dwc_otg_hcd->flags.b.port_connect_status = 0; + + /* + * Shutdown any transfers in process by clearing the Tx FIFO Empty + * interrupt mask and status bits and disabling subsequent host + * channel interrupts. + */ + intr.d32 = 0; + intr.b.nptxfempty = 1; + intr.b.ptxfempty = 1; + intr.b.hcintr = 1; + dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, intr.d32, 0); + dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintsts, intr.d32, 0); + + del_timers(dwc_otg_hcd); + + /* + * Turn off the vbus power only if the core has transitioned to device + * mode. If still in host mode, need to keep power on to detect a + * reconnection. + */ + if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) { + if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) { + hprt0_data_t hprt0 = { .d32=0 }; + DWC_PRINT("Disconnect: PortPower off\n"); + hprt0.b.prtpwr = 0; + dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32); + } + + dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if); + } + + /* Respond with an error status to all URBs in the schedule. */ + kill_all_urbs(dwc_otg_hcd); + + if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) { + /* Clean up any host channels that were in use. */ + int num_channels; + int i; + dwc_hc_t *channel; + dwc_otg_hc_regs_t *hc_regs; + hcchar_data_t hcchar; + + num_channels = dwc_otg_hcd->core_if->core_params->host_channels; + + if (!dwc_otg_hcd->core_if->dma_enable) { + /* Flush out any channel requests in slave mode. */ + for (i = 0; i < num_channels; i++) { + channel = dwc_otg_hcd->hc_ptr_array[i]; + if (list_empty(&channel->hc_list_entry)) { + hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i]; + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chen) { + hcchar.b.chen = 0; + hcchar.b.chdis = 1; + hcchar.b.epdir = 0; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + } + } + } + } + + for (i = 0; i < num_channels; i++) { + channel = dwc_otg_hcd->hc_ptr_array[i]; + if (list_empty(&channel->hc_list_entry)) { + hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i]; + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chen) { + /* Halt the channel. */ + hcchar.b.chdis = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + } + + dwc_otg_hc_cleanup(dwc_otg_hcd->core_if, channel); + list_add_tail(&channel->hc_list_entry, + &dwc_otg_hcd->free_hc_list); + } + } + } + + /* A disconnect will end the session so the B-Device is no + * longer a B-host. */ + ((struct usb_hcd *)p)->self.is_b_host = 0; + return 1; +} + +/** + * Connection timeout function. An OTG host is required to display a + * message if the device does not connect within 10 seconds. + */ +void dwc_otg_hcd_connect_timeout(unsigned long ptr) +{ + DWC_DEBUGPL(DBG_HCDV, "%s(%x)\n", __func__, (int)ptr); + DWC_PRINT("Connect Timeout\n"); + DWC_ERROR("Device Not Connected/Responding\n"); +} + +/** + * Start the connection timer. An OTG host is required to display a + * message if the device does not connect within 10 seconds. The + * timer is deleted if a port connect interrupt occurs before the + * timer expires. + */ +static void dwc_otg_hcd_start_connect_timer(dwc_otg_hcd_t *hcd) +{ + init_timer(&hcd->conn_timer); + hcd->conn_timer.function = dwc_otg_hcd_connect_timeout; + hcd->conn_timer.data = 0; + hcd->conn_timer.expires = jiffies + (HZ * 10); + add_timer(&hcd->conn_timer); +} + +/** + * HCD Callback function for disconnect of the HCD. + * + * @param p void pointer to the <code>struct usb_hcd</code> + */ +static int32_t dwc_otg_hcd_session_start_cb(void *p) +{ + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(p); + DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p); + dwc_otg_hcd_start_connect_timer(dwc_otg_hcd); + return 1; +} + +/** + * HCD Callback structure for handling mode switching. + */ +static dwc_otg_cil_callbacks_t hcd_cil_callbacks = { + .start = dwc_otg_hcd_start_cb, + .stop = dwc_otg_hcd_stop_cb, + .disconnect = dwc_otg_hcd_disconnect_cb, + .session_start = dwc_otg_hcd_session_start_cb, + .p = 0, +}; + +/** + * Reset tasklet function + */ +static void reset_tasklet_func(unsigned long data) +{ + dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t *)data; + dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; + hprt0_data_t hprt0; + + DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n"); + + hprt0.d32 = dwc_otg_read_hprt0(core_if); + hprt0.b.prtrst = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + mdelay(60); + + hprt0.b.prtrst = 0; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + dwc_otg_hcd->flags.b.port_reset_change = 1; +} + +static struct tasklet_struct reset_tasklet = { + .next = NULL, + .state = 0, + .count = ATOMIC_INIT(0), + .func = reset_tasklet_func, + .data = 0, +}; + +/** + * Initializes the HCD. This function allocates memory for and initializes the + * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the + * USB bus with the core and calls the hc_driver->start() function. It returns + * a negative error on failure. + */ +int dwc_otg_hcd_init(struct device *dev) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(dev); + struct usb_hcd *hcd = NULL; + dwc_otg_hcd_t *dwc_otg_hcd = NULL; + + int num_channels; + int i; + dwc_hc_t *channel; + + int retval = 0; + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT\n"); + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + /* 2.6.20+ requires dev.dma_mask to be set prior to calling usb_create_hcd() */ + + /* Set device flags indicating whether the HCD supports DMA. */ + if (otg_dev->core_if->dma_enable) { + DWC_PRINT("Using DMA mode\n"); + dev->dma_mask = (void *)~0; + dev->coherent_dma_mask = ~0; + + if (otg_dev->core_if->dma_desc_enable) { + DWC_PRINT("Device using Descriptor DMA mode\n"); + } else { + DWC_PRINT("Device using Buffer DMA mode\n"); + } + } else { + DWC_PRINT("Using Slave mode\n"); + dev->dma_mask = (void *)0; + dev->coherent_dma_mask = 0; + } +#endif + /* + * Allocate memory for the base HCD plus the DWC OTG HCD. + * Initialize the base HCD. + */ + hcd = usb_create_hcd(&dwc_otg_hc_driver, dev, dev_name(dev)); + if (!hcd) { + retval = -ENOMEM; + goto error1; + } + + dev_set_drvdata(dev, otg_dev); + hcd->regs = otg_dev->base; + hcd->rsrc_start = otg_dev->phys_addr; + hcd->rsrc_len = otg_dev->base_len; + hcd->self.otg_port = 1; + hcd->has_tt = 1; + + /* Initialize the DWC OTG HCD. */ + dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); + dwc_otg_hcd->core_if = otg_dev->core_if; + otg_dev->hcd = dwc_otg_hcd; + + /* */ + spin_lock_init(&dwc_otg_hcd->lock); + + /* Register the HCD CIL Callbacks */ + dwc_otg_cil_register_hcd_callbacks(otg_dev->core_if, + &hcd_cil_callbacks, hcd); + + /* Initialize the non-periodic schedule. */ + INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_inactive); + INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_active); + + /* Initialize the periodic schedule. */ + INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_inactive); + INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_ready); + INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_assigned); + INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_queued); + + /* + * Create a host channel descriptor for each host channel implemented + * in the controller. Initialize the channel descriptor array. + */ + INIT_LIST_HEAD(&dwc_otg_hcd->free_hc_list); + num_channels = dwc_otg_hcd->core_if->core_params->host_channels; + memset(dwc_otg_hcd->hc_ptr_array, 0, sizeof(dwc_otg_hcd->hc_ptr_array)); + for (i = 0; i < num_channels; i++) { + channel = kmalloc(sizeof(dwc_hc_t), GFP_KERNEL); + if (channel == NULL) { + retval = -ENOMEM; + DWC_ERROR("%s: host channel allocation failed\n", __func__); + goto error2; + } + memset(channel, 0, sizeof(dwc_hc_t)); + channel->hc_num = i; + dwc_otg_hcd->hc_ptr_array[i] = channel; +#ifdef DEBUG + init_timer(&dwc_otg_hcd->core_if->hc_xfer_timer[i]); +#endif + DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i, channel); + } + + /* Initialize the Connection timeout timer. */ + init_timer(&dwc_otg_hcd->conn_timer); + + /* Initialize reset tasklet. */ + reset_tasklet.data = (unsigned long) dwc_otg_hcd; + dwc_otg_hcd->reset_tasklet = &reset_tasklet; + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + /* Set device flags indicating whether the HCD supports DMA. */ + if (otg_dev->core_if->dma_enable) { + DWC_PRINT("Using DMA mode\n"); + dev->dma_mask = (void *)~0; + dev->coherent_dma_mask = ~0; + + if (otg_dev->core_if->dma_desc_enable){ + DWC_PRINT("Device using Descriptor DMA mode\n"); + } else { + DWC_PRINT("Device using Buffer DMA mode\n"); + } + } else { + DWC_PRINT("Using Slave mode\n"); + dev->dma_mask = (void *)0; + dev->dev.coherent_dma_mask = 0; + } +#endif + /* + * Finish generic HCD initialization and start the HCD. This function + * allocates the DMA buffer pool, registers the USB bus, requests the + * IRQ line, and calls dwc_otg_hcd_start method. + */ + retval = usb_add_hcd(hcd, otg_dev->irq, IRQF_SHARED); + if (retval < 0) { + goto error2; + } + + /* + * Allocate space for storing data on status transactions. Normally no + * data is sent, but this space acts as a bit bucket. This must be + * done after usb_add_hcd since that function allocates the DMA buffer + * pool. + */ + if (otg_dev->core_if->dma_enable) { + dwc_otg_hcd->status_buf = + dma_alloc_coherent(dev, + DWC_OTG_HCD_STATUS_BUF_SIZE, + &dwc_otg_hcd->status_buf_dma, + GFP_KERNEL | GFP_DMA); + } else { + dwc_otg_hcd->status_buf = kmalloc(DWC_OTG_HCD_STATUS_BUF_SIZE, + GFP_KERNEL); + } + if (!dwc_otg_hcd->status_buf) { + retval = -ENOMEM; + DWC_ERROR("%s: status_buf allocation failed\n", __func__); + goto error3; + } + + dwc_otg_hcd->otg_dev = otg_dev; + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Initialized HCD, bus=%s, usbbus=%d\n", + dev_name(dev), hcd->self.busnum); + + return 0; + + /* Error conditions */ + error3: + usb_remove_hcd(hcd); + error2: + dwc_otg_hcd_free(hcd); + usb_put_hcd(hcd); + + /* FIXME: 2008/05/03 by Steven + * write back to device: + * dwc_otg_hcd has already been released by dwc_otg_hcd_free() + */ + dev_set_drvdata(dev, otg_dev); + + error1: + return retval; +} + +/** + * Removes the HCD. + * Frees memory and resources associated with the HCD and deregisters the bus. + */ +void dwc_otg_hcd_remove(struct device *dev) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(dev); + dwc_otg_hcd_t *dwc_otg_hcd; + struct usb_hcd *hcd; + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE\n"); + + if (!otg_dev) { + DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__); + return; + } + + dwc_otg_hcd = otg_dev->hcd; + + if (!dwc_otg_hcd) { + DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__); + return; + } + + hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd); + + if (!hcd) { + DWC_DEBUGPL(DBG_ANY, "%s: dwc_otg_hcd_to_hcd(dwc_otg_hcd) NULL!\n", __func__); + return; + } + + /* Turn off all interrupts */ + dwc_write_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0); + dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gahbcfg, 1, 0); + + usb_remove_hcd(hcd); + dwc_otg_hcd_free(hcd); + usb_put_hcd(hcd); +} + +/* ========================================================================= + * Linux HC Driver Functions + * ========================================================================= */ + +/** + * Initializes dynamic portions of the DWC_otg HCD state. + */ +static void hcd_reinit(dwc_otg_hcd_t *hcd) +{ + struct list_head *item; + int num_channels; + int i; + dwc_hc_t *channel; + + hcd->flags.d32 = 0; + + hcd->non_periodic_qh_ptr = &hcd->non_periodic_sched_active; + hcd->non_periodic_channels = 0; + hcd->periodic_channels = 0; + + /* + * Put all channels in the free channel list and clean up channel + * states. + */ + item = hcd->free_hc_list.next; + while (item != &hcd->free_hc_list) { + list_del(item); + item = hcd->free_hc_list.next; + } + num_channels = hcd->core_if->core_params->host_channels; + for (i = 0; i < num_channels; i++) { + channel = hcd->hc_ptr_array[i]; + list_add_tail(&channel->hc_list_entry, &hcd->free_hc_list); + dwc_otg_hc_cleanup(hcd->core_if, channel); + } + + /* Initialize the DWC core for host mode operation. */ + dwc_otg_core_host_init(hcd->core_if); +} + +/** Initializes the DWC_otg controller and its root hub and prepares it for host + * mode operation. Activates the root port. Returns 0 on success and a negative + * error code on failure. */ +int dwc_otg_hcd_start(struct usb_hcd *hcd) +{ + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); + dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; + struct usb_bus *bus; + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + struct usb_device *udev; + int retval; +#endif + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n"); + + bus = hcd_to_bus(hcd); + + /* Initialize the bus state. If the core is in Device Mode + * HALT the USB bus and return. */ + if (dwc_otg_is_device_mode(core_if)) { +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + hcd->state = HC_STATE_HALT; +#else + hcd->state = HC_STATE_RUNNING; +#endif + return 0; + } + hcd->state = HC_STATE_RUNNING; + + /* Initialize and connect root hub if one is not already attached */ + if (bus->root_hub) { + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n"); + /* Inform the HUB driver to resume. */ + usb_hcd_resume_root_hub(hcd); + } + else { + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Does Not Have Root Hub\n"); + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + udev = usb_alloc_dev(NULL, bus, 0); + udev->speed = USB_SPEED_HIGH; + if (!udev) { + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error udev alloc\n"); + return -ENODEV; + } + if ((retval = usb_hcd_register_root_hub(udev, hcd)) != 0) { + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error registering %d\n", retval); + return -ENODEV; + } +#endif + } + + hcd_reinit(dwc_otg_hcd); + + return 0; +} + +static void qh_list_free(dwc_otg_hcd_t *hcd, struct list_head *qh_list) +{ + struct list_head *item; + dwc_otg_qh_t *qh; + + if (!qh_list->next) { + /* The list hasn't been initialized yet. */ + return; + } + + /* Ensure there are no QTDs or URBs left. */ + kill_urbs_in_qh_list(hcd, qh_list); + + for (item = qh_list->next; item != qh_list; item = qh_list->next) { + qh = list_entry(item, dwc_otg_qh_t, qh_list_entry); + dwc_otg_hcd_qh_remove_and_free(hcd, qh); + } +} + +/** + * Halts the DWC_otg host mode operations in a clean manner. USB transfers are + * stopped. + */ +void dwc_otg_hcd_stop(struct usb_hcd *hcd) +{ + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); + hprt0_data_t hprt0 = { .d32=0 }; + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n"); + + /* Turn off all host-specific interrupts. */ + dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if); + + /* + * The root hub should be disconnected before this function is called. + * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue) + * and the QH lists (via ..._hcd_endpoint_disable). + */ + + /* Turn off the vbus power */ + DWC_PRINT("PortPower off\n"); + hprt0.b.prtpwr = 0; + dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32); +} + +/** Returns the current frame number. */ +int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd) +{ + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); + hfnum_data_t hfnum; + + hfnum.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if-> + host_if->host_global_regs->hfnum); + +#ifdef DEBUG_SOF + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n", hfnum.b.frnum); +#endif + return hfnum.b.frnum; +} + +/** + * Frees secondary storage associated with the dwc_otg_hcd structure contained + * in the struct usb_hcd field. + */ +void dwc_otg_hcd_free(struct usb_hcd *hcd) +{ + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); + int i; + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n"); + + del_timers(dwc_otg_hcd); + + /* Free memory for QH/QTD lists */ + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_inactive); + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active); + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive); + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready); + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned); + qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued); + + /* Free memory for the host channels. */ + for (i = 0; i < MAX_EPS_CHANNELS; i++) { + dwc_hc_t *hc = dwc_otg_hcd->hc_ptr_array[i]; + if (hc != NULL) { + DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n", i, hc); + kfree(hc); + } + } + + if (dwc_otg_hcd->core_if->dma_enable) { + if (dwc_otg_hcd->status_buf_dma) { + dma_free_coherent(hcd->self.controller, + DWC_OTG_HCD_STATUS_BUF_SIZE, + dwc_otg_hcd->status_buf, + dwc_otg_hcd->status_buf_dma); + } + } else if (dwc_otg_hcd->status_buf != NULL) { + kfree(dwc_otg_hcd->status_buf); + } +} + +#ifdef DEBUG +static void dump_urb_info(struct urb *urb, char* fn_name) +{ + DWC_PRINT("%s, urb %p\n", fn_name, urb); + DWC_PRINT(" Device address: %d\n", usb_pipedevice(urb->pipe)); + DWC_PRINT(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe), + (usb_pipein(urb->pipe) ? "IN" : "OUT")); + DWC_PRINT(" Endpoint type: %s\n", + ({char *pipetype; + switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: pipetype = "CONTROL"; break; + case PIPE_BULK: pipetype = "BULK"; break; + case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break; + case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break; + default: pipetype = "UNKNOWN"; break; + }; pipetype;})); + DWC_PRINT(" Speed: %s\n", + ({char *speed; + switch (urb->dev->speed) { + case USB_SPEED_HIGH: speed = "HIGH"; break; + case USB_SPEED_FULL: speed = "FULL"; break; + case USB_SPEED_LOW: speed = "LOW"; break; + default: speed = "UNKNOWN"; break; + }; speed;})); + DWC_PRINT(" Max packet size: %d\n", + usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))); + DWC_PRINT(" Data buffer length: %d\n", urb->transfer_buffer_length); + DWC_PRINT(" Transfer buffer: %p, Transfer DMA: %p\n", + urb->transfer_buffer, (void *)urb->transfer_dma); + DWC_PRINT(" Setup buffer: %p, Setup DMA: %p\n", + urb->setup_packet, (void *)urb->setup_dma); + DWC_PRINT(" Interval: %d\n", urb->interval); + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { + int i; + for (i = 0; i < urb->number_of_packets; i++) { + DWC_PRINT(" ISO Desc %d:\n", i); + DWC_PRINT(" offset: %d, length %d\n", + urb->iso_frame_desc[i].offset, + urb->iso_frame_desc[i].length); + } + } +} + +static void dump_channel_info(dwc_otg_hcd_t *hcd, + dwc_otg_qh_t *qh) +{ + if (qh->channel != NULL) { + dwc_hc_t *hc = qh->channel; + struct list_head *item; + dwc_otg_qh_t *qh_item; + int num_channels = hcd->core_if->core_params->host_channels; + int i; + + dwc_otg_hc_regs_t *hc_regs; + hcchar_data_t hcchar; + hcsplt_data_t hcsplt; + hctsiz_data_t hctsiz; + uint32_t hcdma; + + hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num]; + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt); + hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); + hcdma = dwc_read_reg32(&hc_regs->hcdma); + + DWC_PRINT(" Assigned to channel %p:\n", hc); + DWC_PRINT(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32); + DWC_PRINT(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma); + DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n", + hc->dev_addr, hc->ep_num, hc->ep_is_in); + DWC_PRINT(" ep_type: %d\n", hc->ep_type); + DWC_PRINT(" max_packet: %d\n", hc->max_packet); + DWC_PRINT(" data_pid_start: %d\n", hc->data_pid_start); + DWC_PRINT(" xfer_started: %d\n", hc->xfer_started); + DWC_PRINT(" halt_status: %d\n", hc->halt_status); + DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buff); + DWC_PRINT(" xfer_len: %d\n", hc->xfer_len); + DWC_PRINT(" qh: %p\n", hc->qh); + DWC_PRINT(" NP inactive sched:\n"); + list_for_each(item, &hcd->non_periodic_sched_inactive) { + qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry); + DWC_PRINT(" %p\n", qh_item); + } + DWC_PRINT(" NP active sched:\n"); + list_for_each(item, &hcd->non_periodic_sched_active) { + qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry); + DWC_PRINT(" %p\n", qh_item); + } + DWC_PRINT(" Channels: \n"); + for (i = 0; i < num_channels; i++) { + dwc_hc_t *hc = hcd->hc_ptr_array[i]; + DWC_PRINT(" %2d: %p\n", i, hc); + } + } +} +#endif + +/** Starts processing a USB transfer request specified by a USB Request Block + * (URB). mem_flags indicates the type of memory allocation to use while + * processing this URB. */ +int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd, + struct urb *urb, +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + int mem_flags +#else + gfp_t mem_flags +#endif + ) +{ + int retval = 0; + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); + dwc_otg_qtd_t *qtd; + +#ifdef DEBUG + if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { + dump_urb_info(urb, "dwc_otg_hcd_urb_enqueue"); + } +#endif + if (!dwc_otg_hcd->flags.b.port_connect_status) { + /* No longer connected. */ + return -ENODEV; + } + + qtd = dwc_otg_hcd_qtd_create(urb); + if (qtd == NULL) { + DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n"); + return -ENOMEM; + } + + retval = dwc_otg_hcd_qtd_add(qtd, dwc_otg_hcd); + if (retval < 0) { + DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. " + "Error status %d\n", retval); + dwc_otg_hcd_qtd_free(qtd); + } + + return retval; +} + +/** Aborts/cancels a USB transfer request. Always returns 0 to indicate + * success. */ +int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd, + struct urb *urb, + int status) +{ + unsigned long flags; + dwc_otg_hcd_t *dwc_otg_hcd; + dwc_otg_qtd_t *urb_qtd; + dwc_otg_qh_t *qh; +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb); +#endif + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n"); + + dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); + + SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags); + + urb_qtd = (dwc_otg_qtd_t *)urb->hcpriv; + qh = (dwc_otg_qh_t *)ep->hcpriv; + +#ifdef DEBUG + if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { + dump_urb_info(urb, "dwc_otg_hcd_urb_dequeue"); + if (urb_qtd == qh->qtd_in_process) { + dump_channel_info(dwc_otg_hcd, qh); + } + } +#endif + + if (urb_qtd == qh->qtd_in_process) { + /* The QTD is in process (it has been assigned to a channel). */ + + if (dwc_otg_hcd->flags.b.port_connect_status) { + /* + * If still connected (i.e. in host mode), halt the + * channel so it can be used for other transfers. If + * no longer connected, the host registers can't be + * written to halt the channel since the core is in + * device mode. + */ + dwc_otg_hc_halt(dwc_otg_hcd->core_if, qh->channel, + DWC_OTG_HC_XFER_URB_DEQUEUE); + } + } + + /* + * Free the QTD and clean up the associated QH. Leave the QH in the + * schedule if it has any remaining QTDs. + */ + dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd, urb_qtd); + if (urb_qtd == qh->qtd_in_process) { + dwc_otg_hcd_qh_deactivate(dwc_otg_hcd, qh, 0); + qh->channel = NULL; + qh->qtd_in_process = NULL; + } else if (list_empty(&qh->qtd_list)) { + dwc_otg_hcd_qh_remove(dwc_otg_hcd, qh); + } + + SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags); + + urb->hcpriv = NULL; + + /* Higher layer software sets URB status. */ +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + usb_hcd_giveback_urb(hcd, urb, status); +#else + usb_hcd_giveback_urb(hcd, urb, NULL); +#endif + if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { + DWC_PRINT("Called usb_hcd_giveback_urb()\n"); + DWC_PRINT(" urb->status = %d\n", urb->status); + } + + return 0; +} + +/** Frees resources in the DWC_otg controller related to a given endpoint. Also + * clears state in the HCD related to the endpoint. Any URBs for the endpoint + * must already be dequeued. */ +void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); + dwc_otg_qh_t *qh; + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + unsigned long flags; + int retry = 0; +#endif + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, " + "endpoint=%d\n", ep->desc.bEndpointAddress, + dwc_ep_addr_to_endpoint(ep->desc.bEndpointAddress)); + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) +rescan: + SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags); + qh = (dwc_otg_qh_t *)(ep->hcpriv); + if (!qh) + goto done; + + /** Check that the QTD list is really empty */ + if (!list_empty(&qh->qtd_list)) { + if (retry++ < 250) { + SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags); + schedule_timeout_uninterruptible(1); + goto rescan; + } + + DWC_WARN("DWC OTG HCD EP DISABLE:" + " QTD List for this endpoint is not empty\n"); + } + + dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd, qh); + ep->hcpriv = NULL; +done: + SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags); + +#else // LINUX_VERSION_CODE + + qh = (dwc_otg_qh_t *)(ep->hcpriv); + if (qh != NULL) { +#ifdef DEBUG + /** Check that the QTD list is really empty */ + if (!list_empty(&qh->qtd_list)) { + DWC_WARN("DWC OTG HCD EP DISABLE:" + " QTD List for this endpoint is not empty\n"); + } +#endif + dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd, qh); + ep->hcpriv = NULL; + } +#endif // LINUX_VERSION_CODE +} + +/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if + * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid + * interrupt. + * + * This function is called by the USB core when an interrupt occurs */ +irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) + , struct pt_regs *regs +#endif + ) +{ + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); + return IRQ_RETVAL(dwc_otg_hcd_handle_intr(dwc_otg_hcd)); +} + +/** Creates Status Change bitmap for the root hub and root port. The bitmap is + * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1 + * is the status change indicator for the single root port. Returns 1 if either + * change indicator is 1, otherwise returns 0. */ +int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd, char *buf) +{ + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); + + buf[0] = 0; + buf[0] |= (dwc_otg_hcd->flags.b.port_connect_status_change || + dwc_otg_hcd->flags.b.port_reset_change || + dwc_otg_hcd->flags.b.port_enable_change || + dwc_otg_hcd->flags.b.port_suspend_change || + dwc_otg_hcd->flags.b.port_over_current_change) << 1; + +#ifdef DEBUG + if (buf[0]) { + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:" + " Root port status changed\n"); + DWC_DEBUGPL(DBG_HCDV, " port_connect_status_change: %d\n", + dwc_otg_hcd->flags.b.port_connect_status_change); + DWC_DEBUGPL(DBG_HCDV, " port_reset_change: %d\n", + dwc_otg_hcd->flags.b.port_reset_change); + DWC_DEBUGPL(DBG_HCDV, " port_enable_change: %d\n", + dwc_otg_hcd->flags.b.port_enable_change); + DWC_DEBUGPL(DBG_HCDV, " port_suspend_change: %d\n", + dwc_otg_hcd->flags.b.port_suspend_change); + DWC_DEBUGPL(DBG_HCDV, " port_over_current_change: %d\n", + dwc_otg_hcd->flags.b.port_over_current_change); + } +#endif + return (buf[0] != 0); +} + +#ifdef DWC_HS_ELECT_TST +/* + * Quick and dirty hack to implement the HS Electrical Test + * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature. + * + * This code was copied from our userspace app "hset". It sends a + * Get Device Descriptor control sequence in two parts, first the + * Setup packet by itself, followed some time later by the In and + * Ack packets. Rather than trying to figure out how to add this + * functionality to the normal driver code, we just hijack the + * hardware, using these two function to drive the hardware + * directly. + */ + +dwc_otg_core_global_regs_t *global_regs; +dwc_otg_host_global_regs_t *hc_global_regs; +dwc_otg_hc_regs_t *hc_regs; +uint32_t *data_fifo; + +static void do_setup(void) +{ + gintsts_data_t gintsts; + hctsiz_data_t hctsiz; + hcchar_data_t hcchar; + haint_data_t haint; + hcint_data_t hcint; + + /* Enable HAINTs */ + dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001); + + /* Enable HCINTs */ + dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* + * Send Setup packet (Get Device Descriptor) + */ + + /* Make sure channel is disabled */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chen) { + //fprintf(stderr, "Channel already enabled 1, HCCHAR = %08x\n", hcchar.d32); + hcchar.b.chdis = 1; +// hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + //sleep(1); + mdelay(1000); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //if (hcchar.b.chen) { + // fprintf(stderr, "** Channel _still_ enabled 1, HCCHAR = %08x **\n", hcchar.d32); + //} + } + + /* Set HCTSIZ */ + hctsiz.d32 = 0; + hctsiz.b.xfersize = 8; + hctsiz.b.pktcnt = 1; + hctsiz.b.pid = DWC_OTG_HC_PID_SETUP; + dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); + + /* Set HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; + hcchar.b.epdir = 0; + hcchar.b.epnum = 0; + hcchar.b.mps = 8; + hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + + /* Fill FIFO with Setup data for Get Device Descriptor */ + data_fifo = (uint32_t *)((char *)global_regs + 0x1000); + dwc_write_reg32(data_fifo++, 0x01000680); + dwc_write_reg32(data_fifo++, 0x00080000); + + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "Waiting for HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32); + + /* Wait for host channel interrupt */ + do { + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + } while (gintsts.b.hcintr == 0); + + //fprintf(stderr, "Got HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32); + + /* Disable HCINTs */ + dwc_write_reg32(&hc_regs->hcintmsk, 0x0000); + + /* Disable HAINTs */ + dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); +} + +static void do_in_ack(void) +{ + gintsts_data_t gintsts; + hctsiz_data_t hctsiz; + hcchar_data_t hcchar; + haint_data_t haint; + hcint_data_t hcint; + host_grxsts_data_t grxsts; + + /* Enable HAINTs */ + dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001); + + /* Enable HCINTs */ + dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* + * Receive Control In packet + */ + + /* Make sure channel is disabled */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chen) { + //fprintf(stderr, "Channel already enabled 2, HCCHAR = %08x\n", hcchar.d32); + hcchar.b.chdis = 1; + hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + //sleep(1); + mdelay(1000); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //if (hcchar.b.chen) { + // fprintf(stderr, "** Channel _still_ enabled 2, HCCHAR = %08x **\n", hcchar.d32); + //} + } + + /* Set HCTSIZ */ + hctsiz.d32 = 0; + hctsiz.b.xfersize = 8; + hctsiz.b.pktcnt = 1; + hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; + dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); + + /* Set HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; + hcchar.b.epdir = 1; + hcchar.b.epnum = 0; + hcchar.b.mps = 8; + hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "Waiting for RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32); + + /* Wait for receive status queue interrupt */ + do { + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + } while (gintsts.b.rxstsqlvl == 0); + + //fprintf(stderr, "Got RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32); + + /* Read RXSTS */ + grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp); + //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32); + + /* Clear RXSTSQLVL in GINTSTS */ + gintsts.d32 = 0; + gintsts.b.rxstsqlvl = 1; + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + switch (grxsts.b.pktsts) { + case DWC_GRXSTS_PKTSTS_IN: + /* Read the data into the host buffer */ + if (grxsts.b.bcnt > 0) { + int i; + int word_count = (grxsts.b.bcnt + 3) / 4; + + data_fifo = (uint32_t *)((char *)global_regs + 0x1000); + + for (i = 0; i < word_count; i++) { + (void)dwc_read_reg32(data_fifo++); + } + } + + //fprintf(stderr, "Received %u bytes\n", (unsigned)grxsts.b.bcnt); + break; + + default: + //fprintf(stderr, "** Unexpected GRXSTS packet status 1 **\n"); + break; + } + + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "Waiting for RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32); + + /* Wait for receive status queue interrupt */ + do { + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + } while (gintsts.b.rxstsqlvl == 0); + + //fprintf(stderr, "Got RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32); + + /* Read RXSTS */ + grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp); + //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32); + + /* Clear RXSTSQLVL in GINTSTS */ + gintsts.d32 = 0; + gintsts.b.rxstsqlvl = 1; + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + switch (grxsts.b.pktsts) { + case DWC_GRXSTS_PKTSTS_IN_XFER_COMP: + break; + + default: + //fprintf(stderr, "** Unexpected GRXSTS packet status 2 **\n"); + break; + } + + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "Waiting for HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32); + + /* Wait for host channel interrupt */ + do { + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + } while (gintsts.b.hcintr == 0); + + //fprintf(stderr, "Got HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + +// usleep(100000); +// mdelay(100); + mdelay(1); + + /* + * Send handshake packet + */ + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Make sure channel is disabled */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chen) { + //fprintf(stderr, "Channel already enabled 3, HCCHAR = %08x\n", hcchar.d32); + hcchar.b.chdis = 1; + hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + //sleep(1); + mdelay(1000); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //if (hcchar.b.chen) { + // fprintf(stderr, "** Channel _still_ enabled 3, HCCHAR = %08x **\n", hcchar.d32); + //} + } + + /* Set HCTSIZ */ + hctsiz.d32 = 0; + hctsiz.b.xfersize = 0; + hctsiz.b.pktcnt = 1; + hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; + dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); + + /* Set HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; + hcchar.b.epdir = 0; + hcchar.b.epnum = 0; + hcchar.b.mps = 8; + hcchar.b.chen = 1; + dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); + + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "Waiting for HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32); + + /* Wait for host channel interrupt */ + do { + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + } while (gintsts.b.hcintr == 0); + + //fprintf(stderr, "Got HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32); + + /* Disable HCINTs */ + dwc_write_reg32(&hc_regs->hcintmsk, 0x0000); + + /* Disable HAINTs */ + dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000); + + /* Read HAINT */ + haint.d32 = dwc_read_reg32(&hc_global_regs->haint); + //fprintf(stderr, "HAINT: %08x\n", haint.d32); + + /* Read HCINT */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + //fprintf(stderr, "HCINT: %08x\n", hcint.d32); + + /* Read HCCHAR */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); + + /* Clear HCINT */ + dwc_write_reg32(&hc_regs->hcint, hcint.d32); + + /* Clear HAINT */ + dwc_write_reg32(&hc_global_regs->haint, haint.d32); + + /* Clear GINTSTS */ + dwc_write_reg32(&global_regs->gintsts, gintsts.d32); + + /* Read GINTSTS */ + gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); + //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); +} +#endif /* DWC_HS_ELECT_TST */ + +/** Handles hub class-specific requests. */ +int dwc_otg_hcd_hub_control(struct usb_hcd *hcd, + u16 typeReq, + u16 wValue, + u16 wIndex, + char *buf, + u16 wLength) +{ + int retval = 0; + + dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); + dwc_otg_core_if_t *core_if = hcd_to_dwc_otg_hcd(hcd)->core_if; + struct usb_hub_descriptor *desc; + hprt0_data_t hprt0 = {.d32 = 0}; + + uint32_t port_status; + + switch (typeReq) { + case ClearHubFeature: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearHubFeature 0x%x\n", wValue); + switch (wValue) { + case C_HUB_LOCAL_POWER: + case C_HUB_OVER_CURRENT: + /* Nothing required here */ + break; + default: + retval = -EINVAL; + DWC_ERROR("DWC OTG HCD - " + "ClearHubFeature request %xh unknown\n", wValue); + } + break; + case ClearPortFeature: + if (!wIndex || wIndex > 1) + goto error; + + switch (wValue) { + case USB_PORT_FEAT_ENABLE: + DWC_DEBUGPL(DBG_ANY, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_ENABLE\n"); + hprt0.d32 = dwc_otg_read_hprt0(core_if); + hprt0.b.prtena = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + break; + case USB_PORT_FEAT_SUSPEND: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_SUSPEND\n"); + hprt0.d32 = dwc_otg_read_hprt0(core_if); + hprt0.b.prtres = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + /* Clear Resume bit */ + mdelay(100); + hprt0.b.prtres = 0; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + break; + case USB_PORT_FEAT_POWER: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_POWER\n"); + hprt0.d32 = dwc_otg_read_hprt0(core_if); + hprt0.b.prtpwr = 0; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + break; + case USB_PORT_FEAT_INDICATOR: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_INDICATOR\n"); + /* Port inidicator not supported */ + break; + case USB_PORT_FEAT_C_CONNECTION: + /* Clears drivers internal connect status change + * flag */ + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n"); + dwc_otg_hcd->flags.b.port_connect_status_change = 0; + break; + case USB_PORT_FEAT_C_RESET: + /* Clears the driver's internal Port Reset Change + * flag */ + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_C_RESET\n"); + dwc_otg_hcd->flags.b.port_reset_change = 0; + break; + case USB_PORT_FEAT_C_ENABLE: + /* Clears the driver's internal Port + * Enable/Disable Change flag */ + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n"); + dwc_otg_hcd->flags.b.port_enable_change = 0; + break; + case USB_PORT_FEAT_C_SUSPEND: + /* Clears the driver's internal Port Suspend + * Change flag, which is set when resume signaling on + * the host port is complete */ + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n"); + dwc_otg_hcd->flags.b.port_suspend_change = 0; + break; + case USB_PORT_FEAT_C_OVER_CURRENT: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n"); + dwc_otg_hcd->flags.b.port_over_current_change = 0; + break; + default: + retval = -EINVAL; + DWC_ERROR("DWC OTG HCD - " + "ClearPortFeature request %xh " + "unknown or unsupported\n", wValue); + } + break; + case GetHubDescriptor: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "GetHubDescriptor\n"); + desc = (struct usb_hub_descriptor *)buf; + desc->bDescLength = 9; + desc->bDescriptorType = 0x29; + desc->bNbrPorts = 1; + desc->wHubCharacteristics = 0x08; + desc->bPwrOn2PwrGood = 1; + desc->bHubContrCurrent = 0; +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,39) + desc->u.hs.DeviceRemovable[0] = 0; + desc->u.hs.DeviceRemovable[1] = 0xff; +#endif + break; + case GetHubStatus: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "GetHubStatus\n"); + memset(buf, 0, 4); + break; + case GetPortStatus: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "GetPortStatus\n"); + + if (!wIndex || wIndex > 1) + goto error; + + port_status = 0; + + if (dwc_otg_hcd->flags.b.port_connect_status_change) + port_status |= (1 << USB_PORT_FEAT_C_CONNECTION); + + if (dwc_otg_hcd->flags.b.port_enable_change) + port_status |= (1 << USB_PORT_FEAT_C_ENABLE); + + if (dwc_otg_hcd->flags.b.port_suspend_change) + port_status |= (1 << USB_PORT_FEAT_C_SUSPEND); + + if (dwc_otg_hcd->flags.b.port_reset_change) + port_status |= (1 << USB_PORT_FEAT_C_RESET); + + if (dwc_otg_hcd->flags.b.port_over_current_change) { + DWC_ERROR("Device Not Supported\n"); + port_status |= (1 << USB_PORT_FEAT_C_OVER_CURRENT); + } + + if (!dwc_otg_hcd->flags.b.port_connect_status) { + /* + * The port is disconnected, which means the core is + * either in device mode or it soon will be. Just + * return 0's for the remainder of the port status + * since the port register can't be read if the core + * is in device mode. + */ + *((__le32 *) buf) = cpu_to_le32(port_status); + break; + } + + hprt0.d32 = dwc_read_reg32(core_if->host_if->hprt0); + DWC_DEBUGPL(DBG_HCDV, " HPRT0: 0x%08x\n", hprt0.d32); + + if (hprt0.b.prtconnsts) + port_status |= (1 << USB_PORT_FEAT_CONNECTION); + + if (hprt0.b.prtena) + port_status |= (1 << USB_PORT_FEAT_ENABLE); + + if (hprt0.b.prtsusp) + port_status |= (1 << USB_PORT_FEAT_SUSPEND); + + if (hprt0.b.prtovrcurract) + port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT); + + if (hprt0.b.prtrst) + port_status |= (1 << USB_PORT_FEAT_RESET); + + if (hprt0.b.prtpwr) + port_status |= (1 << USB_PORT_FEAT_POWER); + + if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) + port_status |= USB_PORT_STAT_HIGH_SPEED; + else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED) + port_status |= USB_PORT_STAT_LOW_SPEED; + + if (hprt0.b.prttstctl) + port_status |= (1 << USB_PORT_FEAT_TEST); + + /* USB_PORT_FEAT_INDICATOR unsupported always 0 */ + + *((__le32 *) buf) = cpu_to_le32(port_status); + + break; + case SetHubFeature: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "SetHubFeature\n"); + /* No HUB features supported */ + break; + case SetPortFeature: + if (wValue != USB_PORT_FEAT_TEST && (!wIndex || wIndex > 1)) + goto error; + + if (!dwc_otg_hcd->flags.b.port_connect_status) { + /* + * The port is disconnected, which means the core is + * either in device mode or it soon will be. Just + * return without doing anything since the port + * register can't be written if the core is in device + * mode. + */ + break; + } + + switch (wValue) { + case USB_PORT_FEAT_SUSPEND: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "SetPortFeature - USB_PORT_FEAT_SUSPEND\n"); + if (hcd->self.otg_port == wIndex && + hcd->self.b_hnp_enable) { + gotgctl_data_t gotgctl = {.d32=0}; + gotgctl.b.hstsethnpen = 1; + dwc_modify_reg32(&core_if->core_global_regs->gotgctl, + 0, gotgctl.d32); + core_if->op_state = A_SUSPEND; + } + hprt0.d32 = dwc_otg_read_hprt0(core_if); + hprt0.b.prtsusp = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + //DWC_PRINT("SUSPEND: HPRT0=%0x\n", hprt0.d32); + /* Suspend the Phy Clock */ + { + pcgcctl_data_t pcgcctl = {.d32=0}; + pcgcctl.b.stoppclk = 1; + dwc_write_reg32(core_if->pcgcctl, pcgcctl.d32); + } + + /* For HNP the bus must be suspended for at least 200ms. */ + if (hcd->self.b_hnp_enable) { + mdelay(200); + //DWC_PRINT("SUSPEND: wait complete! (%d)\n", _hcd->state); + } + break; + case USB_PORT_FEAT_POWER: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "SetPortFeature - USB_PORT_FEAT_POWER\n"); + hprt0.d32 = dwc_otg_read_hprt0(core_if); + hprt0.b.prtpwr = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + break; + case USB_PORT_FEAT_RESET: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "SetPortFeature - USB_PORT_FEAT_RESET\n"); + hprt0.d32 = dwc_otg_read_hprt0(core_if); + /* When B-Host the Port reset bit is set in + * the Start HCD Callback function, so that + * the reset is started within 1ms of the HNP + * success interrupt. */ + if (!hcd->self.is_b_host) { + hprt0.b.prtrst = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + } + /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */ + MDELAY(60); + hprt0.b.prtrst = 0; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + break; + +#ifdef DWC_HS_ELECT_TST + case USB_PORT_FEAT_TEST: + { + uint32_t t; + gintmsk_data_t gintmsk; + + t = (wIndex >> 8); /* MSB wIndex USB */ + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "SetPortFeature - USB_PORT_FEAT_TEST %d\n", t); + warn("USB_PORT_FEAT_TEST %d\n", t); + if (t < 6) { + hprt0.d32 = dwc_otg_read_hprt0(core_if); + hprt0.b.prttstctl = t; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + } else { + /* Setup global vars with reg addresses (quick and + * dirty hack, should be cleaned up) + */ + global_regs = core_if->core_global_regs; + hc_global_regs = core_if->host_if->host_global_regs; + hc_regs = (dwc_otg_hc_regs_t *)((char *)global_regs + 0x500); + data_fifo = (uint32_t *)((char *)global_regs + 0x1000); + + if (t == 6) { /* HS_HOST_PORT_SUSPEND_RESUME */ + /* Save current interrupt mask */ + gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk); + + /* Disable all interrupts while we muck with + * the hardware directly + */ + dwc_write_reg32(&global_regs->gintmsk, 0); + + /* 15 second delay per the test spec */ + mdelay(15000); + + /* Drive suspend on the root port */ + hprt0.d32 = dwc_otg_read_hprt0(core_if); + hprt0.b.prtsusp = 1; + hprt0.b.prtres = 0; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + + /* 15 second delay per the test spec */ + mdelay(15000); + + /* Drive resume on the root port */ + hprt0.d32 = dwc_otg_read_hprt0(core_if); + hprt0.b.prtsusp = 0; + hprt0.b.prtres = 1; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + mdelay(100); + + /* Clear the resume bit */ + hprt0.b.prtres = 0; + dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); + + /* Restore interrupts */ + dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32); + } else if (t == 7) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */ + /* Save current interrupt mask */ + gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk); + + /* Disable all interrupts while we muck with + * the hardware directly + */ + dwc_write_reg32(&global_regs->gintmsk, 0); + + /* 15 second delay per the test spec */ + mdelay(15000); + + /* Send the Setup packet */ + do_setup(); + + /* 15 second delay so nothing else happens for awhile */ + mdelay(15000); + + /* Restore interrupts */ + dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32); + } else if (t == 8) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */ + /* Save current interrupt mask */ + gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk); + + /* Disable all interrupts while we muck with + * the hardware directly + */ + dwc_write_reg32(&global_regs->gintmsk, 0); + + /* Send the Setup packet */ + do_setup(); + + /* 15 second delay so nothing else happens for awhile */ + mdelay(15000); + + /* Send the In and Ack packets */ + do_in_ack(); + + /* 15 second delay so nothing else happens for awhile */ + mdelay(15000); + + /* Restore interrupts */ + dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32); + } + } + break; + } +#endif /* DWC_HS_ELECT_TST */ + + case USB_PORT_FEAT_INDICATOR: + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " + "SetPortFeature - USB_PORT_FEAT_INDICATOR\n"); + /* Not supported */ + break; + default: + retval = -EINVAL; + DWC_ERROR("DWC OTG HCD - " + "SetPortFeature request %xh " + "unknown or unsupported\n", wValue); + break; + } + break; + default: + error: + retval = -EINVAL; + DWC_WARN("DWC OTG HCD - " + "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n", + typeReq, wIndex, wValue); + break; + } + + return retval; +} + +/** + * Assigns transactions from a QTD to a free host channel and initializes the + * host channel to perform the transactions. The host channel is removed from + * the free list. + * + * @param hcd The HCD state structure. + * @param qh Transactions from the first QTD for this QH are selected and + * assigned to a free host channel. + */ +static void assign_and_init_hc(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) +{ + dwc_hc_t *hc; + dwc_otg_qtd_t *qtd; + struct urb *urb; + + DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p)\n", __func__, hcd, qh); + + hc = list_entry(hcd->free_hc_list.next, dwc_hc_t, hc_list_entry); + + /* Remove the host channel from the free list. */ + list_del_init(&hc->hc_list_entry); + + qtd = list_entry(qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); + urb = qtd->urb; + qh->channel = hc; + qh->qtd_in_process = qtd; + + /* + * Use usb_pipedevice to determine device address. This address is + * 0 before the SET_ADDRESS command and the correct address afterward. + */ + hc->dev_addr = usb_pipedevice(urb->pipe); + hc->ep_num = usb_pipeendpoint(urb->pipe); + + if (urb->dev->speed == USB_SPEED_LOW) { + hc->speed = DWC_OTG_EP_SPEED_LOW; + } else if (urb->dev->speed == USB_SPEED_FULL) { + hc->speed = DWC_OTG_EP_SPEED_FULL; + } else { + hc->speed = DWC_OTG_EP_SPEED_HIGH; + } + + hc->max_packet = dwc_max_packet(qh->maxp); + + hc->xfer_started = 0; + hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS; + hc->error_state = (qtd->error_count > 0); + hc->halt_on_queue = 0; + hc->halt_pending = 0; + hc->requests = 0; + + /* + * The following values may be modified in the transfer type section + * below. The xfer_len value may be reduced when the transfer is + * started to accommodate the max widths of the XferSize and PktCnt + * fields in the HCTSIZn register. + */ + hc->do_ping = qh->ping_state; + hc->ep_is_in = (usb_pipein(urb->pipe) != 0); + hc->data_pid_start = qh->data_toggle; + hc->multi_count = 1; + + if (hcd->core_if->dma_enable) { + hc->xfer_buff = (uint8_t *)urb->transfer_dma + urb->actual_length; + } else { + hc->xfer_buff = (uint8_t *)urb->transfer_buffer + urb->actual_length; + } + hc->xfer_len = urb->transfer_buffer_length - urb->actual_length; + hc->xfer_count = 0; + + /* + * Set the split attributes + */ + hc->do_split = 0; + if (qh->do_split) { + hc->do_split = 1; + hc->xact_pos = qtd->isoc_split_pos; + hc->complete_split = qtd->complete_split; + hc->hub_addr = urb->dev->tt->hub->devnum; + hc->port_addr = urb->dev->ttport; + } + + switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: + hc->ep_type = DWC_OTG_EP_TYPE_CONTROL; + switch (qtd->control_phase) { + case DWC_OTG_CONTROL_SETUP: + DWC_DEBUGPL(DBG_HCDV, " Control setup transaction\n"); + hc->do_ping = 0; + hc->ep_is_in = 0; + hc->data_pid_start = DWC_OTG_HC_PID_SETUP; + if (hcd->core_if->dma_enable) { + hc->xfer_buff = (uint8_t *)urb->setup_dma; + } else { + hc->xfer_buff = (uint8_t *)urb->setup_packet; + } + hc->xfer_len = 8; + break; + case DWC_OTG_CONTROL_DATA: + DWC_DEBUGPL(DBG_HCDV, " Control data transaction\n"); + hc->data_pid_start = qtd->data_toggle; + break; + case DWC_OTG_CONTROL_STATUS: + /* + * Direction is opposite of data direction or IN if no + * data. + */ + DWC_DEBUGPL(DBG_HCDV, " Control status transaction\n"); + if (urb->transfer_buffer_length == 0) { + hc->ep_is_in = 1; + } else { + hc->ep_is_in = (usb_pipein(urb->pipe) != USB_DIR_IN); + } + if (hc->ep_is_in) { + hc->do_ping = 0; + } + hc->data_pid_start = DWC_OTG_HC_PID_DATA1; + hc->xfer_len = 0; + if (hcd->core_if->dma_enable) { + hc->xfer_buff = (uint8_t *)hcd->status_buf_dma; + } else { + hc->xfer_buff = (uint8_t *)hcd->status_buf; + } + break; + } + break; + case PIPE_BULK: + hc->ep_type = DWC_OTG_EP_TYPE_BULK; + break; + case PIPE_INTERRUPT: + hc->ep_type = DWC_OTG_EP_TYPE_INTR; + break; + case PIPE_ISOCHRONOUS: + { + struct usb_iso_packet_descriptor *frame_desc; + frame_desc = &urb->iso_frame_desc[qtd->isoc_frame_index]; + hc->ep_type = DWC_OTG_EP_TYPE_ISOC; + if (hcd->core_if->dma_enable) { + hc->xfer_buff = (uint8_t *)urb->transfer_dma; + } else { + hc->xfer_buff = (uint8_t *)urb->transfer_buffer; + } + hc->xfer_buff += frame_desc->offset + qtd->isoc_split_offset; + hc->xfer_len = frame_desc->length - qtd->isoc_split_offset; + + if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) { + if (hc->xfer_len <= 188) { + hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL; + } + else { + hc->xact_pos = DWC_HCSPLIT_XACTPOS_BEGIN; + } + } + } + break; + } + + if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || + hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + /* + * This value may be modified when the transfer is started to + * reflect the actual transfer length. + */ + hc->multi_count = dwc_hb_mult(qh->maxp); + } + + dwc_otg_hc_init(hcd->core_if, hc); + hc->qh = qh; +} + +/** + * This function selects transactions from the HCD transfer schedule and + * assigns them to available host channels. It is called from HCD interrupt + * handler functions. + * + * @param hcd The HCD state structure. + * + * @return The types of new transactions that were assigned to host channels. + */ +dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *hcd) +{ + struct list_head *qh_ptr; + dwc_otg_qh_t *qh; + int num_channels; + dwc_otg_transaction_type_e ret_val = DWC_OTG_TRANSACTION_NONE; + +#ifdef DEBUG_SOF + DWC_DEBUGPL(DBG_HCD, " Select Transactions\n"); +#endif + + /* Process entries in the periodic ready list. */ + qh_ptr = hcd->periodic_sched_ready.next; + while (qh_ptr != &hcd->periodic_sched_ready && + !list_empty(&hcd->free_hc_list)) { + + qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry); + assign_and_init_hc(hcd, qh); + + /* + * Move the QH from the periodic ready schedule to the + * periodic assigned schedule. + */ + qh_ptr = qh_ptr->next; + list_move(&qh->qh_list_entry, &hcd->periodic_sched_assigned); + + ret_val = DWC_OTG_TRANSACTION_PERIODIC; + } + + /* + * Process entries in the inactive portion of the non-periodic + * schedule. Some free host channels may not be used if they are + * reserved for periodic transfers. + */ + qh_ptr = hcd->non_periodic_sched_inactive.next; + num_channels = hcd->core_if->core_params->host_channels; + while (qh_ptr != &hcd->non_periodic_sched_inactive && + (hcd->non_periodic_channels < + num_channels - hcd->periodic_channels) && + !list_empty(&hcd->free_hc_list)) { + + qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry); + assign_and_init_hc(hcd, qh); + + /* + * Move the QH from the non-periodic inactive schedule to the + * non-periodic active schedule. + */ + qh_ptr = qh_ptr->next; + list_move(&qh->qh_list_entry, &hcd->non_periodic_sched_active); + + if (ret_val == DWC_OTG_TRANSACTION_NONE) { + ret_val = DWC_OTG_TRANSACTION_NON_PERIODIC; + } else { + ret_val = DWC_OTG_TRANSACTION_ALL; + } + + hcd->non_periodic_channels++; + } + + return ret_val; +} + +/** + * Attempts to queue a single transaction request for a host channel + * associated with either a periodic or non-periodic transfer. This function + * assumes that there is space available in the appropriate request queue. For + * an OUT transfer or SETUP transaction in Slave mode, it checks whether space + * is available in the appropriate Tx FIFO. + * + * @param hcd The HCD state structure. + * @param hc Host channel descriptor associated with either a periodic or + * non-periodic transfer. + * @param fifo_dwords_avail Number of DWORDs available in the periodic Tx + * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic + * transfers. + * + * @return 1 if a request is queued and more requests may be needed to + * complete the transfer, 0 if no more requests are required for this + * transfer, -1 if there is insufficient space in the Tx FIFO. + */ +static int queue_transaction(dwc_otg_hcd_t *hcd, + dwc_hc_t *hc, + uint16_t fifo_dwords_avail) +{ + int retval; + + if (hcd->core_if->dma_enable) { + if (!hc->xfer_started) { + dwc_otg_hc_start_transfer(hcd->core_if, hc); + hc->qh->ping_state = 0; + } + retval = 0; + } else if (hc->halt_pending) { + /* Don't queue a request if the channel has been halted. */ + retval = 0; + } else if (hc->halt_on_queue) { + dwc_otg_hc_halt(hcd->core_if, hc, hc->halt_status); + retval = 0; + } else if (hc->do_ping) { + if (!hc->xfer_started) { + dwc_otg_hc_start_transfer(hcd->core_if, hc); + } + retval = 0; + } else if (!hc->ep_is_in || + hc->data_pid_start == DWC_OTG_HC_PID_SETUP) { + if ((fifo_dwords_avail * 4) >= hc->max_packet) { + if (!hc->xfer_started) { + dwc_otg_hc_start_transfer(hcd->core_if, hc); + retval = 1; + } else { + retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc); + } + } else { + retval = -1; + } + } else { + if (!hc->xfer_started) { + dwc_otg_hc_start_transfer(hcd->core_if, hc); + retval = 1; + } else { + retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc); + } + } + + return retval; +} + +/** + * Processes active non-periodic channels and queues transactions for these + * channels to the DWC_otg controller. After queueing transactions, the NP Tx + * FIFO Empty interrupt is enabled if there are more transactions to queue as + * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx + * FIFO Empty interrupt is disabled. + */ +static void process_non_periodic_channels(dwc_otg_hcd_t *hcd) +{ + gnptxsts_data_t tx_status; + struct list_head *orig_qh_ptr; + dwc_otg_qh_t *qh; + int status; + int no_queue_space = 0; + int no_fifo_space = 0; + int more_to_do = 0; + + dwc_otg_core_global_regs_t *global_regs = hcd->core_if->core_global_regs; + + DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n"); +#ifdef DEBUG + tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts); + DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (before queue): %d\n", + tx_status.b.nptxqspcavail); + DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (before queue): %d\n", + tx_status.b.nptxfspcavail); +#endif + /* + * Keep track of the starting point. Skip over the start-of-list + * entry. + */ + if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) { + hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next; + } + orig_qh_ptr = hcd->non_periodic_qh_ptr; + + /* + * Process once through the active list or until no more space is + * available in the request queue or the Tx FIFO. + */ + do { + tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts); + if (!hcd->core_if->dma_enable && tx_status.b.nptxqspcavail == 0) { + no_queue_space = 1; + break; + } + + qh = list_entry(hcd->non_periodic_qh_ptr, dwc_otg_qh_t, qh_list_entry); + status = queue_transaction(hcd, qh->channel, tx_status.b.nptxfspcavail); + + if (status > 0) { + more_to_do = 1; + } else if (status < 0) { + no_fifo_space = 1; + break; + } + + /* Advance to next QH, skipping start-of-list entry. */ + hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next; + if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) { + hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next; + } + + } while (hcd->non_periodic_qh_ptr != orig_qh_ptr); + + if (!hcd->core_if->dma_enable) { + gintmsk_data_t intr_mask = {.d32 = 0}; + intr_mask.b.nptxfempty = 1; + +#ifdef DEBUG + tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts); + DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (after queue): %d\n", + tx_status.b.nptxqspcavail); + DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (after queue): %d\n", + tx_status.b.nptxfspcavail); +#endif + if (more_to_do || no_queue_space || no_fifo_space) { + /* + * May need to queue more transactions as the request + * queue or Tx FIFO empties. Enable the non-periodic + * Tx FIFO empty interrupt. (Always use the half-empty + * level to ensure that new requests are loaded as + * soon as possible.) + */ + dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32); + } else { + /* + * Disable the Tx FIFO empty interrupt since there are + * no more transactions that need to be queued right + * now. This function is called from interrupt + * handlers to queue more transactions as transfer + * states change. + */ + dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0); + } + } +} + +/** + * Processes periodic channels for the next frame and queues transactions for + * these channels to the DWC_otg controller. After queueing transactions, the + * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions + * to queue as Periodic Tx FIFO or request queue space becomes available. + * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled. + */ +static void process_periodic_channels(dwc_otg_hcd_t *hcd) +{ + hptxsts_data_t tx_status; + struct list_head *qh_ptr; + dwc_otg_qh_t *qh; + int status; + int no_queue_space = 0; + int no_fifo_space = 0; + + dwc_otg_host_global_regs_t *host_regs; + host_regs = hcd->core_if->host_if->host_global_regs; + + DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n"); +#ifdef DEBUG + tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts); + DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail (before queue): %d\n", + tx_status.b.ptxqspcavail); + DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (before queue): %d\n", + tx_status.b.ptxfspcavail); +#endif + + qh_ptr = hcd->periodic_sched_assigned.next; + while (qh_ptr != &hcd->periodic_sched_assigned) { + tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts); + if (tx_status.b.ptxqspcavail == 0) { + no_queue_space = 1; + break; + } + + qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry); + + /* + * Set a flag if we're queuing high-bandwidth in slave mode. + * The flag prevents any halts to get into the request queue in + * the middle of multiple high-bandwidth packets getting queued. + */ + if (!hcd->core_if->dma_enable && + qh->channel->multi_count > 1) + { + hcd->core_if->queuing_high_bandwidth = 1; + } + + status = queue_transaction(hcd, qh->channel, tx_status.b.ptxfspcavail); + if (status < 0) { + no_fifo_space = 1; + break; + } + + /* + * In Slave mode, stay on the current transfer until there is + * nothing more to do or the high-bandwidth request count is + * reached. In DMA mode, only need to queue one request. The + * controller automatically handles multiple packets for + * high-bandwidth transfers. + */ + if (hcd->core_if->dma_enable || status == 0 || + qh->channel->requests == qh->channel->multi_count) { + qh_ptr = qh_ptr->next; + /* + * Move the QH from the periodic assigned schedule to + * the periodic queued schedule. + */ + list_move(&qh->qh_list_entry, &hcd->periodic_sched_queued); + + /* done queuing high bandwidth */ + hcd->core_if->queuing_high_bandwidth = 0; + } + } + + if (!hcd->core_if->dma_enable) { + dwc_otg_core_global_regs_t *global_regs; + gintmsk_data_t intr_mask = {.d32 = 0}; + + global_regs = hcd->core_if->core_global_regs; + intr_mask.b.ptxfempty = 1; +#ifdef DEBUG + tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts); + DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail (after queue): %d\n", + tx_status.b.ptxqspcavail); + DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (after queue): %d\n", + tx_status.b.ptxfspcavail); +#endif + if (!list_empty(&hcd->periodic_sched_assigned) || + no_queue_space || no_fifo_space) { + /* + * May need to queue more transactions as the request + * queue or Tx FIFO empties. Enable the periodic Tx + * FIFO empty interrupt. (Always use the half-empty + * level to ensure that new requests are loaded as + * soon as possible.) + */ + dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32); + } else { + /* + * Disable the Tx FIFO empty interrupt since there are + * no more transactions that need to be queued right + * now. This function is called from interrupt + * handlers to queue more transactions as transfer + * states change. + */ + dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0); + } + } +} + +/** + * This function processes the currently active host channels and queues + * transactions for these channels to the DWC_otg controller. It is called + * from HCD interrupt handler functions. + * + * @param hcd The HCD state structure. + * @param tr_type The type(s) of transactions to queue (non-periodic, + * periodic, or both). + */ +void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *hcd, + dwc_otg_transaction_type_e tr_type) +{ +#ifdef DEBUG_SOF + DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n"); +#endif + /* Process host channels associated with periodic transfers. */ + if ((tr_type == DWC_OTG_TRANSACTION_PERIODIC || + tr_type == DWC_OTG_TRANSACTION_ALL) && + !list_empty(&hcd->periodic_sched_assigned)) { + + process_periodic_channels(hcd); + } + + /* Process host channels associated with non-periodic transfers. */ + if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC || + tr_type == DWC_OTG_TRANSACTION_ALL) { + if (!list_empty(&hcd->non_periodic_sched_active)) { + process_non_periodic_channels(hcd); + } else { + /* + * Ensure NP Tx FIFO empty interrupt is disabled when + * there are no non-periodic transfers to process. + */ + gintmsk_data_t gintmsk = {.d32 = 0}; + gintmsk.b.nptxfempty = 1; + dwc_modify_reg32(&hcd->core_if->core_global_regs->gintmsk, + gintmsk.d32, 0); + } + } +} + +/** + * Sets the final status of an URB and returns it to the device driver. Any + * required cleanup of the URB is performed. + */ +void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *hcd, struct urb *urb, int status) +{ +#ifdef DEBUG + if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { + DWC_PRINT("%s: urb %p, device %d, ep %d %s, status=%d\n", + __func__, urb, usb_pipedevice(urb->pipe), + usb_pipeendpoint(urb->pipe), + usb_pipein(urb->pipe) ? "IN" : "OUT", status); + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { + int i; + for (i = 0; i < urb->number_of_packets; i++) { + DWC_PRINT(" ISO Desc %d status: %d\n", + i, urb->iso_frame_desc[i].status); + } + } + } +#endif + + urb->status = status; + urb->hcpriv = NULL; +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb, status); +#else + usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb, NULL); +#endif +} + +/* + * Returns the Queue Head for an URB. + */ +dwc_otg_qh_t *dwc_urb_to_qh(struct urb *urb) +{ + struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb); + return (dwc_otg_qh_t *)ep->hcpriv; +} + +#ifdef DEBUG +void dwc_print_setup_data(uint8_t *setup) +{ + int i; + if (CHK_DEBUG_LEVEL(DBG_HCD)){ + DWC_PRINT("Setup Data = MSB "); + for (i = 7; i >= 0; i--) DWC_PRINT("%02x ", setup[i]); + DWC_PRINT("\n"); + DWC_PRINT(" bmRequestType Tranfer = %s\n", (setup[0] & 0x80) ? "Device-to-Host" : "Host-to-Device"); + DWC_PRINT(" bmRequestType Type = "); + switch ((setup[0] & 0x60) >> 5) { + case 0: DWC_PRINT("Standard\n"); break; + case 1: DWC_PRINT("Class\n"); break; + case 2: DWC_PRINT("Vendor\n"); break; + case 3: DWC_PRINT("Reserved\n"); break; + } + DWC_PRINT(" bmRequestType Recipient = "); + switch (setup[0] & 0x1f) { + case 0: DWC_PRINT("Device\n"); break; + case 1: DWC_PRINT("Interface\n"); break; + case 2: DWC_PRINT("Endpoint\n"); break; + case 3: DWC_PRINT("Other\n"); break; + default: DWC_PRINT("Reserved\n"); break; + } + DWC_PRINT(" bRequest = 0x%0x\n", setup[1]); + DWC_PRINT(" wValue = 0x%0x\n", *((uint16_t *)&setup[2])); + DWC_PRINT(" wIndex = 0x%0x\n", *((uint16_t *)&setup[4])); + DWC_PRINT(" wLength = 0x%0x\n\n", *((uint16_t *)&setup[6])); + } +} +#endif + +void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *hcd) { +#if defined(DEBUG) && LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + DWC_PRINT("Frame remaining at SOF:\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + hcd->frrem_samples, hcd->frrem_accum, + (hcd->frrem_samples > 0) ? + hcd->frrem_accum/hcd->frrem_samples : 0); + + DWC_PRINT("\n"); + DWC_PRINT("Frame remaining at start_transfer (uframe 7):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + hcd->core_if->hfnum_7_samples, hcd->core_if->hfnum_7_frrem_accum, + (hcd->core_if->hfnum_7_samples > 0) ? + hcd->core_if->hfnum_7_frrem_accum/hcd->core_if->hfnum_7_samples : 0); + DWC_PRINT("Frame remaining at start_transfer (uframe 0):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + hcd->core_if->hfnum_0_samples, hcd->core_if->hfnum_0_frrem_accum, + (hcd->core_if->hfnum_0_samples > 0) ? + hcd->core_if->hfnum_0_frrem_accum/hcd->core_if->hfnum_0_samples : 0); + DWC_PRINT("Frame remaining at start_transfer (uframe 1-6):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + hcd->core_if->hfnum_other_samples, hcd->core_if->hfnum_other_frrem_accum, + (hcd->core_if->hfnum_other_samples > 0) ? + hcd->core_if->hfnum_other_frrem_accum/hcd->core_if->hfnum_other_samples : 0); + + DWC_PRINT("\n"); + DWC_PRINT("Frame remaining at sample point A (uframe 7):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + hcd->hfnum_7_samples_a, hcd->hfnum_7_frrem_accum_a, + (hcd->hfnum_7_samples_a > 0) ? + hcd->hfnum_7_frrem_accum_a/hcd->hfnum_7_samples_a : 0); + DWC_PRINT("Frame remaining at sample point A (uframe 0):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + hcd->hfnum_0_samples_a, hcd->hfnum_0_frrem_accum_a, + (hcd->hfnum_0_samples_a > 0) ? + hcd->hfnum_0_frrem_accum_a/hcd->hfnum_0_samples_a : 0); + DWC_PRINT("Frame remaining at sample point A (uframe 1-6):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + hcd->hfnum_other_samples_a, hcd->hfnum_other_frrem_accum_a, + (hcd->hfnum_other_samples_a > 0) ? + hcd->hfnum_other_frrem_accum_a/hcd->hfnum_other_samples_a : 0); + + DWC_PRINT("\n"); + DWC_PRINT("Frame remaining at sample point B (uframe 7):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + hcd->hfnum_7_samples_b, hcd->hfnum_7_frrem_accum_b, + (hcd->hfnum_7_samples_b > 0) ? + hcd->hfnum_7_frrem_accum_b/hcd->hfnum_7_samples_b : 0); + DWC_PRINT("Frame remaining at sample point B (uframe 0):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + hcd->hfnum_0_samples_b, hcd->hfnum_0_frrem_accum_b, + (hcd->hfnum_0_samples_b > 0) ? + hcd->hfnum_0_frrem_accum_b/hcd->hfnum_0_samples_b : 0); + DWC_PRINT("Frame remaining at sample point B (uframe 1-6):\n"); + DWC_PRINT(" samples %u, accum %llu, avg %llu\n", + hcd->hfnum_other_samples_b, hcd->hfnum_other_frrem_accum_b, + (hcd->hfnum_other_samples_b > 0) ? + hcd->hfnum_other_frrem_accum_b/hcd->hfnum_other_samples_b : 0); +#endif +} + +void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *hcd) +{ +#ifdef DEBUG + int num_channels; + int i; + gnptxsts_data_t np_tx_status; + hptxsts_data_t p_tx_status; + + num_channels = hcd->core_if->core_params->host_channels; + DWC_PRINT("\n"); + DWC_PRINT("************************************************************\n"); + DWC_PRINT("HCD State:\n"); + DWC_PRINT(" Num channels: %d\n", num_channels); + for (i = 0; i < num_channels; i++) { + dwc_hc_t *hc = hcd->hc_ptr_array[i]; + DWC_PRINT(" Channel %d:\n", i); + DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n", + hc->dev_addr, hc->ep_num, hc->ep_is_in); + DWC_PRINT(" speed: %d\n", hc->speed); + DWC_PRINT(" ep_type: %d\n", hc->ep_type); + DWC_PRINT(" max_packet: %d\n", hc->max_packet); + DWC_PRINT(" data_pid_start: %d\n", hc->data_pid_start); + DWC_PRINT(" multi_count: %d\n", hc->multi_count); + DWC_PRINT(" xfer_started: %d\n", hc->xfer_started); + DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buff); + DWC_PRINT(" xfer_len: %d\n", hc->xfer_len); + DWC_PRINT(" xfer_count: %d\n", hc->xfer_count); + DWC_PRINT(" halt_on_queue: %d\n", hc->halt_on_queue); + DWC_PRINT(" halt_pending: %d\n", hc->halt_pending); + DWC_PRINT(" halt_status: %d\n", hc->halt_status); + DWC_PRINT(" do_split: %d\n", hc->do_split); + DWC_PRINT(" complete_split: %d\n", hc->complete_split); + DWC_PRINT(" hub_addr: %d\n", hc->hub_addr); + DWC_PRINT(" port_addr: %d\n", hc->port_addr); + DWC_PRINT(" xact_pos: %d\n", hc->xact_pos); + DWC_PRINT(" requests: %d\n", hc->requests); + DWC_PRINT(" qh: %p\n", hc->qh); + if (hc->xfer_started) { + hfnum_data_t hfnum; + hcchar_data_t hcchar; + hctsiz_data_t hctsiz; + hcint_data_t hcint; + hcintmsk_data_t hcintmsk; + hfnum.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hfnum); + hcchar.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcchar); + hctsiz.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hctsiz); + hcint.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcint); + hcintmsk.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcintmsk); + DWC_PRINT(" hfnum: 0x%08x\n", hfnum.d32); + DWC_PRINT(" hcchar: 0x%08x\n", hcchar.d32); + DWC_PRINT(" hctsiz: 0x%08x\n", hctsiz.d32); + DWC_PRINT(" hcint: 0x%08x\n", hcint.d32); + DWC_PRINT(" hcintmsk: 0x%08x\n", hcintmsk.d32); + } + if (hc->xfer_started && hc->qh && hc->qh->qtd_in_process) { + dwc_otg_qtd_t *qtd; + struct urb *urb; + qtd = hc->qh->qtd_in_process; + urb = qtd->urb; + DWC_PRINT(" URB Info:\n"); + DWC_PRINT(" qtd: %p, urb: %p\n", qtd, urb); + if (urb) { + DWC_PRINT(" Dev: %d, EP: %d %s\n", + usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe), + usb_pipein(urb->pipe) ? "IN" : "OUT"); + DWC_PRINT(" Max packet size: %d\n", + usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))); + DWC_PRINT(" transfer_buffer: %p\n", urb->transfer_buffer); + DWC_PRINT(" transfer_dma: %p\n", (void *)urb->transfer_dma); + DWC_PRINT(" transfer_buffer_length: %d\n", urb->transfer_buffer_length); + DWC_PRINT(" actual_length: %d\n", urb->actual_length); + } + } + } + DWC_PRINT(" non_periodic_channels: %d\n", hcd->non_periodic_channels); + DWC_PRINT(" periodic_channels: %d\n", hcd->periodic_channels); + DWC_PRINT(" periodic_usecs: %d\n", hcd->periodic_usecs); + np_tx_status.d32 = dwc_read_reg32(&hcd->core_if->core_global_regs->gnptxsts); + DWC_PRINT(" NP Tx Req Queue Space Avail: %d\n", np_tx_status.b.nptxqspcavail); + DWC_PRINT(" NP Tx FIFO Space Avail: %d\n", np_tx_status.b.nptxfspcavail); + p_tx_status.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hptxsts); + DWC_PRINT(" P Tx Req Queue Space Avail: %d\n", p_tx_status.b.ptxqspcavail); + DWC_PRINT(" P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail); + dwc_otg_hcd_dump_frrem(hcd); + dwc_otg_dump_global_registers(hcd->core_if); + dwc_otg_dump_host_registers(hcd->core_if); + DWC_PRINT("************************************************************\n"); + DWC_PRINT("\n"); +#endif +} +#endif /* DWC_DEVICE_ONLY */ diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd.h b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd.h new file mode 100644 index 0000000000..ee41dc96f9 --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd.h @@ -0,0 +1,668 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.h $ + * $Revision: 1.3 $ + * $Date: 2008-12-15 06:51:32 $ + * $Change: 1064918 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ +#ifndef DWC_DEVICE_ONLY +#ifndef __DWC_HCD_H__ +#define __DWC_HCD_H__ + +#include <linux/list.h> +#include <linux/usb.h> +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,35) +#include <linux/usb/hcd.h> +#else +#include <../drivers/usb/core/hcd.h> +#endif + +struct dwc_otg_device; + +#include "dwc_otg_cil.h" + +/** + * @file + * + * This file contains the structures, constants, and interfaces for + * the Host Contoller Driver (HCD). + * + * The Host Controller Driver (HCD) is responsible for translating requests + * from the USB Driver into the appropriate actions on the DWC_otg controller. + * It isolates the USBD from the specifics of the controller by providing an + * API to the USBD. + */ + +/** + * Phases for control transfers. + */ +typedef enum dwc_otg_control_phase { + DWC_OTG_CONTROL_SETUP, + DWC_OTG_CONTROL_DATA, + DWC_OTG_CONTROL_STATUS +} dwc_otg_control_phase_e; + +/** Transaction types. */ +typedef enum dwc_otg_transaction_type { + DWC_OTG_TRANSACTION_NONE, + DWC_OTG_TRANSACTION_PERIODIC, + DWC_OTG_TRANSACTION_NON_PERIODIC, + DWC_OTG_TRANSACTION_ALL +} dwc_otg_transaction_type_e; + +/** + * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control, + * interrupt, or isochronous transfer. A single QTD is created for each URB + * (of one of these types) submitted to the HCD. The transfer associated with + * a QTD may require one or multiple transactions. + * + * A QTD is linked to a Queue Head, which is entered in either the + * non-periodic or periodic schedule for execution. When a QTD is chosen for + * execution, some or all of its transactions may be executed. After + * execution, the state of the QTD is updated. The QTD may be retired if all + * its transactions are complete or if an error occurred. Otherwise, it + * remains in the schedule so more transactions can be executed later. + */ +typedef struct dwc_otg_qtd { + /** + * Determines the PID of the next data packet for the data phase of + * control transfers. Ignored for other transfer types.<br> + * One of the following values: + * - DWC_OTG_HC_PID_DATA0 + * - DWC_OTG_HC_PID_DATA1 + */ + uint8_t data_toggle; + + /** Current phase for control transfers (Setup, Data, or Status). */ + dwc_otg_control_phase_e control_phase; + + /** Keep track of the current split type + * for FS/LS endpoints on a HS Hub */ + uint8_t complete_split; + + /** How many bytes transferred during SSPLIT OUT */ + uint32_t ssplit_out_xfer_count; + + /** + * Holds the number of bus errors that have occurred for a transaction + * within this transfer. + */ + uint8_t error_count; + + /** + * Index of the next frame descriptor for an isochronous transfer. A + * frame descriptor describes the buffer position and length of the + * data to be transferred in the next scheduled (micro)frame of an + * isochronous transfer. It also holds status for that transaction. + * The frame index starts at 0. + */ + int isoc_frame_index; + + /** Position of the ISOC split on full/low speed */ + uint8_t isoc_split_pos; + + /** Position of the ISOC split in the buffer for the current frame */ + uint16_t isoc_split_offset; + + /** URB for this transfer */ + struct urb *urb; + + /** This list of QTDs */ + struct list_head qtd_list_entry; + +} dwc_otg_qtd_t; + +/** + * A Queue Head (QH) holds the static characteristics of an endpoint and + * maintains a list of transfers (QTDs) for that endpoint. A QH structure may + * be entered in either the non-periodic or periodic schedule. + */ +typedef struct dwc_otg_qh { + /** + * Endpoint type. + * One of the following values: + * - USB_ENDPOINT_XFER_CONTROL + * - USB_ENDPOINT_XFER_ISOC + * - USB_ENDPOINT_XFER_BULK + * - USB_ENDPOINT_XFER_INT + */ + uint8_t ep_type; + uint8_t ep_is_in; + + /** wMaxPacketSize Field of Endpoint Descriptor. */ + uint16_t maxp; + + /** + * Determines the PID of the next data packet for non-control + * transfers. Ignored for control transfers.<br> + * One of the following values: + * - DWC_OTG_HC_PID_DATA0 + * - DWC_OTG_HC_PID_DATA1 + */ + uint8_t data_toggle; + + /** Ping state if 1. */ + uint8_t ping_state; + + /** + * List of QTDs for this QH. + */ + struct list_head qtd_list; + + /** Host channel currently processing transfers for this QH. */ + dwc_hc_t *channel; + + /** QTD currently assigned to a host channel for this QH. */ + dwc_otg_qtd_t *qtd_in_process; + + /** Full/low speed endpoint on high-speed hub requires split. */ + uint8_t do_split; + + /** @name Periodic schedule information */ + /** @{ */ + + /** Bandwidth in microseconds per (micro)frame. */ + uint8_t usecs; + + /** Interval between transfers in (micro)frames. */ + uint16_t interval; + + /** + * (micro)frame to initialize a periodic transfer. The transfer + * executes in the following (micro)frame. + */ + uint16_t sched_frame; + + /** (micro)frame at which last start split was initialized. */ + uint16_t start_split_frame; + + /** @} */ + + /** Entry for QH in either the periodic or non-periodic schedule. */ + struct list_head qh_list_entry; + + /* For non-dword aligned buffer support */ + uint8_t *dw_align_buf; + dma_addr_t dw_align_buf_dma; +} dwc_otg_qh_t; + +/** + * This structure holds the state of the HCD, including the non-periodic and + * periodic schedules. + */ +typedef struct dwc_otg_hcd { + /** The DWC otg device pointer */ + struct dwc_otg_device *otg_dev; + + /** DWC OTG Core Interface Layer */ + dwc_otg_core_if_t *core_if; + + /** Internal DWC HCD Flags */ + volatile union dwc_otg_hcd_internal_flags { + uint32_t d32; + struct { + unsigned port_connect_status_change : 1; + unsigned port_connect_status : 1; + unsigned port_reset_change : 1; + unsigned port_enable_change : 1; + unsigned port_suspend_change : 1; + unsigned port_over_current_change : 1; + unsigned reserved : 27; + } b; + } flags; + + /** + * Inactive items in the non-periodic schedule. This is a list of + * Queue Heads. Transfers associated with these Queue Heads are not + * currently assigned to a host channel. + */ + struct list_head non_periodic_sched_inactive; + + /** + * Active items in the non-periodic schedule. This is a list of + * Queue Heads. Transfers associated with these Queue Heads are + * currently assigned to a host channel. + */ + struct list_head non_periodic_sched_active; + + /** + * Pointer to the next Queue Head to process in the active + * non-periodic schedule. + */ + struct list_head *non_periodic_qh_ptr; + + /** + * Inactive items in the periodic schedule. This is a list of QHs for + * periodic transfers that are _not_ scheduled for the next frame. + * Each QH in the list has an interval counter that determines when it + * needs to be scheduled for execution. This scheduling mechanism + * allows only a simple calculation for periodic bandwidth used (i.e. + * must assume that all periodic transfers may need to execute in the + * same frame). However, it greatly simplifies scheduling and should + * be sufficient for the vast majority of OTG hosts, which need to + * connect to a small number of peripherals at one time. + * + * Items move from this list to periodic_sched_ready when the QH + * interval counter is 0 at SOF. + */ + struct list_head periodic_sched_inactive; + + /** + * List of periodic QHs that are ready for execution in the next + * frame, but have not yet been assigned to host channels. + * + * Items move from this list to periodic_sched_assigned as host + * channels become available during the current frame. + */ + struct list_head periodic_sched_ready; + + /** + * List of periodic QHs to be executed in the next frame that are + * assigned to host channels. + * + * Items move from this list to periodic_sched_queued as the + * transactions for the QH are queued to the DWC_otg controller. + */ + struct list_head periodic_sched_assigned; + + /** + * List of periodic QHs that have been queued for execution. + * + * Items move from this list to either periodic_sched_inactive or + * periodic_sched_ready when the channel associated with the transfer + * is released. If the interval for the QH is 1, the item moves to + * periodic_sched_ready because it must be rescheduled for the next + * frame. Otherwise, the item moves to periodic_sched_inactive. + */ + struct list_head periodic_sched_queued; + + /** + * Total bandwidth claimed so far for periodic transfers. This value + * is in microseconds per (micro)frame. The assumption is that all + * periodic transfers may occur in the same (micro)frame. + */ + uint16_t periodic_usecs; + + /** + * Frame number read from the core at SOF. The value ranges from 0 to + * DWC_HFNUM_MAX_FRNUM. + */ + uint16_t frame_number; + + /** + * Free host channels in the controller. This is a list of + * dwc_hc_t items. + */ + struct list_head free_hc_list; + + /** + * Number of host channels assigned to periodic transfers. Currently + * assuming that there is a dedicated host channel for each periodic + * transaction and at least one host channel available for + * non-periodic transactions. + */ + int periodic_channels; + + /** + * Number of host channels assigned to non-periodic transfers. + */ + int non_periodic_channels; + + /** + * Array of pointers to the host channel descriptors. Allows accessing + * a host channel descriptor given the host channel number. This is + * useful in interrupt handlers. + */ + dwc_hc_t *hc_ptr_array[MAX_EPS_CHANNELS]; + + /** + * Buffer to use for any data received during the status phase of a + * control transfer. Normally no data is transferred during the status + * phase. This buffer is used as a bit bucket. + */ + uint8_t *status_buf; + + /** + * DMA address for status_buf. + */ + dma_addr_t status_buf_dma; +#define DWC_OTG_HCD_STATUS_BUF_SIZE 64 + + /** + * Structure to allow starting the HCD in a non-interrupt context + * during an OTG role change. + */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + struct work_struct start_work; +#else + struct delayed_work start_work; +#endif + + /** + * Connection timer. An OTG host must display a message if the device + * does not connect. Started when the VBus power is turned on via + * sysfs attribute "buspower". + */ + struct timer_list conn_timer; + + /* Tasket to do a reset */ + struct tasklet_struct *reset_tasklet; + + /* */ + spinlock_t lock; + +#ifdef DEBUG + uint32_t frrem_samples; + uint64_t frrem_accum; + + uint32_t hfnum_7_samples_a; + uint64_t hfnum_7_frrem_accum_a; + uint32_t hfnum_0_samples_a; + uint64_t hfnum_0_frrem_accum_a; + uint32_t hfnum_other_samples_a; + uint64_t hfnum_other_frrem_accum_a; + + uint32_t hfnum_7_samples_b; + uint64_t hfnum_7_frrem_accum_b; + uint32_t hfnum_0_samples_b; + uint64_t hfnum_0_frrem_accum_b; + uint32_t hfnum_other_samples_b; + uint64_t hfnum_other_frrem_accum_b; +#endif +} dwc_otg_hcd_t; + +/** Gets the dwc_otg_hcd from a struct usb_hcd */ +static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hcd *hcd) +{ + return (dwc_otg_hcd_t *)(hcd->hcd_priv); +} + +/** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */ +static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_t *dwc_otg_hcd) +{ + return container_of((void *)dwc_otg_hcd, struct usb_hcd, hcd_priv); +} + +/** @name HCD Create/Destroy Functions */ +/** @{ */ +extern int dwc_otg_hcd_init(struct device *dev); +extern void dwc_otg_hcd_remove(struct device *dev); +/** @} */ + +/** @name Linux HC Driver API Functions */ +/** @{ */ + +extern int dwc_otg_hcd_start(struct usb_hcd *hcd); +extern void dwc_otg_hcd_stop(struct usb_hcd *hcd); +extern int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd); +extern void dwc_otg_hcd_free(struct usb_hcd *hcd); +extern int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd, + struct urb *urb, +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + int mem_flags +#else + gfp_t mem_flags +#endif + ); +extern int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd, +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) +#endif + struct urb *urb, int status); +extern void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd, + struct usb_host_endpoint *ep); +extern irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + , struct pt_regs *regs +#endif + ); +extern int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd, + char *buf); +extern int dwc_otg_hcd_hub_control(struct usb_hcd *hcd, + u16 typeReq, + u16 wValue, + u16 wIndex, + char *buf, + u16 wLength); + +/** @} */ + +/** @name Transaction Execution Functions */ +/** @{ */ +extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *hcd); +extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *hcd, + dwc_otg_transaction_type_e tr_type); +extern void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *_hcd, struct urb *urb, + int status); +/** @} */ + +/** @name Interrupt Handler Functions */ +/** @{ */ +extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t *dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t *dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t *dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dwc_otg_hcd_t *dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t *dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr(dwc_otg_hcd_t *dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_disconnect_intr(dwc_otg_hcd_t *dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t *dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t *dwc_otg_hcd, uint32_t num); +extern int32_t dwc_otg_hcd_handle_session_req_intr(dwc_otg_hcd_t *dwc_otg_hcd); +extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr(dwc_otg_hcd_t *dwc_otg_hcd); +/** @} */ + + +/** @name Schedule Queue Functions */ +/** @{ */ + +/* Implemented in dwc_otg_hcd_queue.c */ +extern dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t *hcd, struct urb *urb); +extern void dwc_otg_hcd_qh_init(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, struct urb *urb); +extern void dwc_otg_hcd_qh_free(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh); +extern int dwc_otg_hcd_qh_add(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh); +extern void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh); +extern void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, int sched_csplit); + +/** Remove and free a QH */ +static inline void dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd_t *hcd, + dwc_otg_qh_t *qh) +{ + dwc_otg_hcd_qh_remove(hcd, qh); + dwc_otg_hcd_qh_free(hcd, qh); +} + +/** Allocates memory for a QH structure. + * @return Returns the memory allocate or NULL on error. */ +static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc(void) +{ + return (dwc_otg_qh_t *) kmalloc(sizeof(dwc_otg_qh_t), GFP_KERNEL); +} + +extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(struct urb *urb); +extern void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t *qtd, struct urb *urb); +extern int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t *qtd, dwc_otg_hcd_t *dwc_otg_hcd); + +/** Allocates memory for a QTD structure. + * @return Returns the memory allocate or NULL on error. */ +static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc(void) +{ + return (dwc_otg_qtd_t *) kmalloc(sizeof(dwc_otg_qtd_t), GFP_KERNEL); +} + +/** Frees the memory for a QTD structure. QTD should already be removed from + * list. + * @param[in] qtd QTD to free.*/ +static inline void dwc_otg_hcd_qtd_free(dwc_otg_qtd_t *qtd) +{ + kfree(qtd); +} + +/** Removes a QTD from list. + * @param[in] hcd HCD instance. + * @param[in] qtd QTD to remove from list. */ +static inline void dwc_otg_hcd_qtd_remove(dwc_otg_hcd_t *hcd, dwc_otg_qtd_t *qtd) +{ + unsigned long flags; + SPIN_LOCK_IRQSAVE(&hcd->lock, flags); + list_del(&qtd->qtd_list_entry); + SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags); +} + +/** Remove and free a QTD */ +static inline void dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd_t *hcd, dwc_otg_qtd_t *qtd) +{ + dwc_otg_hcd_qtd_remove(hcd, qtd); + dwc_otg_hcd_qtd_free(qtd); +} + +/** @} */ + + +/** @name Internal Functions */ +/** @{ */ +dwc_otg_qh_t *dwc_urb_to_qh(struct urb *urb); +void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *hcd); +void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *hcd); +/** @} */ + +/** Gets the usb_host_endpoint associated with an URB. */ +static inline struct usb_host_endpoint *dwc_urb_to_endpoint(struct urb *urb) +{ + struct usb_device *dev = urb->dev; + int ep_num = usb_pipeendpoint(urb->pipe); + + if (usb_pipein(urb->pipe)) + return dev->ep_in[ep_num]; + else + return dev->ep_out[ep_num]; +} + +/** + * Gets the endpoint number from a _bEndpointAddress argument. The endpoint is + * qualified with its direction (possible 32 endpoints per device). + */ +#define dwc_ep_addr_to_endpoint(_bEndpointAddress_) ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \ + ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4) + +/** Gets the QH that contains the list_head */ +#define dwc_list_to_qh(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qh_t, qh_list_entry) + +/** Gets the QTD that contains the list_head */ +#define dwc_list_to_qtd(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qtd_t, qtd_list_entry) + +/** Check if QH is non-periodic */ +#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == USB_ENDPOINT_XFER_BULK) || \ + (_qh_ptr_->ep_type == USB_ENDPOINT_XFER_CONTROL)) + +/** High bandwidth multiplier as encoded in highspeed endpoint descriptors */ +#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) + +/** Packet size for any kind of endpoint descriptor */ +#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff) + +/** + * Returns true if _frame1 is less than or equal to _frame2. The comparison is + * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the + * frame number when the max frame number is reached. + */ +static inline int dwc_frame_num_le(uint16_t frame1, uint16_t frame2) +{ + return ((frame2 - frame1) & DWC_HFNUM_MAX_FRNUM) <= + (DWC_HFNUM_MAX_FRNUM >> 1); +} + +/** + * Returns true if _frame1 is greater than _frame2. The comparison is done + * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the frame + * number when the max frame number is reached. + */ +static inline int dwc_frame_num_gt(uint16_t frame1, uint16_t frame2) +{ + return (frame1 != frame2) && + (((frame1 - frame2) & DWC_HFNUM_MAX_FRNUM) < + (DWC_HFNUM_MAX_FRNUM >> 1)); +} + +/** + * Increments _frame by the amount specified by _inc. The addition is done + * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value. + */ +static inline uint16_t dwc_frame_num_inc(uint16_t frame, uint16_t inc) +{ + return (frame + inc) & DWC_HFNUM_MAX_FRNUM; +} + +static inline uint16_t dwc_full_frame_num(uint16_t frame) +{ + return (frame & DWC_HFNUM_MAX_FRNUM) >> 3; +} + +static inline uint16_t dwc_micro_frame_num(uint16_t frame) +{ + return frame & 0x7; +} + +#ifdef DEBUG +/** + * Macro to sample the remaining PHY clocks left in the current frame. This + * may be used during debugging to determine the average time it takes to + * execute sections of code. There are two possible sample points, "a" and + * "b", so the _letter argument must be one of these values. + * + * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For + * example, "cat /sys/devices/lm0/hcd_frrem". + */ +#define dwc_sample_frrem(_hcd, _qh, _letter) \ +{ \ + hfnum_data_t hfnum; \ + dwc_otg_qtd_t *qtd; \ + qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); \ + if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_frame != 0 && !qtd->complete_split) { \ + hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum); \ + switch (hfnum.b.frnum & 0x7) { \ + case 7: \ + _hcd->hfnum_7_samples_##_letter++; \ + _hcd->hfnum_7_frrem_accum_##_letter += hfnum.b.frrem; \ + break; \ + case 0: \ + _hcd->hfnum_0_samples_##_letter++; \ + _hcd->hfnum_0_frrem_accum_##_letter += hfnum.b.frrem; \ + break; \ + default: \ + _hcd->hfnum_other_samples_##_letter++; \ + _hcd->hfnum_other_frrem_accum_##_letter += hfnum.b.frrem; \ + break; \ + } \ + } \ +} +#else +#define dwc_sample_frrem(_hcd, _qh, _letter) +#endif +#endif +#endif /* DWC_DEVICE_ONLY */ diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c new file mode 100644 index 0000000000..bdf2db99f3 --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c @@ -0,0 +1,1873 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_intr.c $ + * $Revision: 1.6.2.1 $ + * $Date: 2009-04-22 03:48:22 $ + * $Change: 1117667 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ +#ifndef DWC_DEVICE_ONLY + +#include <linux/version.h> + +#include "dwc_otg_driver.h" +#include "dwc_otg_hcd.h" +#include "dwc_otg_regs.h" + +/** @file + * This file contains the implementation of the HCD Interrupt handlers. + */ + +/** This function handles interrupts for the HCD. */ +int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t *dwc_otg_hcd) +{ + int retval = 0; + + dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; + gintsts_data_t gintsts; +#ifdef DEBUG + dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; +#endif + + /* Check if HOST Mode */ + if (dwc_otg_is_host_mode(core_if)) { + gintsts.d32 = dwc_otg_read_core_intr(core_if); + if (!gintsts.d32) { + return 0; + } + +#ifdef DEBUG + /* Don't print debug message in the interrupt handler on SOF */ +# ifndef DEBUG_SOF + if (gintsts.d32 != DWC_SOF_INTR_MASK) +# endif + DWC_DEBUGPL(DBG_HCD, "\n"); +#endif + +#ifdef DEBUG +# ifndef DEBUG_SOF + if (gintsts.d32 != DWC_SOF_INTR_MASK) +# endif + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x\n", gintsts.d32); +#endif + if (gintsts.b.usbreset) { + DWC_PRINT("Usb Reset In Host Mode\n"); + } + + + if (gintsts.b.sofintr) { + retval |= dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd); + } + if (gintsts.b.rxstsqlvl) { + retval |= dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd); + } + if (gintsts.b.nptxfempty) { + retval |= dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd); + } + if (gintsts.b.i2cintr) { + /** @todo Implement i2cintr handler. */ + } + if (gintsts.b.portintr) { + retval |= dwc_otg_hcd_handle_port_intr(dwc_otg_hcd); + } + if (gintsts.b.hcintr) { + retval |= dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd); + } + if (gintsts.b.ptxfempty) { + retval |= dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd); + } +#ifdef DEBUG +# ifndef DEBUG_SOF + if (gintsts.d32 != DWC_SOF_INTR_MASK) +# endif + { + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Finished Servicing Interrupts\n"); + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintsts=0x%08x\n", + dwc_read_reg32(&global_regs->gintsts)); + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintmsk=0x%08x\n", + dwc_read_reg32(&global_regs->gintmsk)); + } +#endif + +#ifdef DEBUG +# ifndef DEBUG_SOF + if (gintsts.d32 != DWC_SOF_INTR_MASK) +# endif + DWC_DEBUGPL(DBG_HCD, "\n"); +#endif + + } + + S3C2410X_CLEAR_EINTPEND(); + + return retval; +} + +#ifdef DWC_TRACK_MISSED_SOFS +#warning Compiling code to track missed SOFs +#define FRAME_NUM_ARRAY_SIZE 1000 +/** + * This function is for debug only. + */ +static inline void track_missed_sofs(uint16_t curr_frame_number) +{ + static uint16_t frame_num_array[FRAME_NUM_ARRAY_SIZE]; + static uint16_t last_frame_num_array[FRAME_NUM_ARRAY_SIZE]; + static int frame_num_idx = 0; + static uint16_t last_frame_num = DWC_HFNUM_MAX_FRNUM; + static int dumped_frame_num_array = 0; + + if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) { + if (((last_frame_num + 1) & DWC_HFNUM_MAX_FRNUM) != curr_frame_number) { + frame_num_array[frame_num_idx] = curr_frame_number; + last_frame_num_array[frame_num_idx++] = last_frame_num; + } + } else if (!dumped_frame_num_array) { + int i; + printk(KERN_EMERG USB_DWC "Frame Last Frame\n"); + printk(KERN_EMERG USB_DWC "----- ----------\n"); + for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) { + printk(KERN_EMERG USB_DWC "0x%04x 0x%04x\n", + frame_num_array[i], last_frame_num_array[i]); + } + dumped_frame_num_array = 1; + } + last_frame_num = curr_frame_number; +} +#endif + +/** + * Handles the start-of-frame interrupt in host mode. Non-periodic + * transactions may be queued to the DWC_otg controller for the current + * (micro)frame. Periodic transactions may be queued to the controller for the + * next (micro)frame. + */ +int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t *hcd) +{ + hfnum_data_t hfnum; + struct list_head *qh_entry; + dwc_otg_qh_t *qh; + dwc_otg_transaction_type_e tr_type; + gintsts_data_t gintsts = {.d32 = 0}; + + hfnum.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hfnum); + +#ifdef DEBUG_SOF + DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n"); +#endif + hcd->frame_number = hfnum.b.frnum; + +#ifdef DEBUG + hcd->frrem_accum += hfnum.b.frrem; + hcd->frrem_samples++; +#endif + +#ifdef DWC_TRACK_MISSED_SOFS + track_missed_sofs(hcd->frame_number); +#endif + + /* Determine whether any periodic QHs should be executed. */ + qh_entry = hcd->periodic_sched_inactive.next; + while (qh_entry != &hcd->periodic_sched_inactive) { + qh = list_entry(qh_entry, dwc_otg_qh_t, qh_list_entry); + qh_entry = qh_entry->next; + if (dwc_frame_num_le(qh->sched_frame, hcd->frame_number)) { + /* + * Move QH to the ready list to be executed next + * (micro)frame. + */ + list_move(&qh->qh_list_entry, &hcd->periodic_sched_ready); + } + } + + tr_type = dwc_otg_hcd_select_transactions(hcd); + if (tr_type != DWC_OTG_TRANSACTION_NONE) { + dwc_otg_hcd_queue_transactions(hcd, tr_type); + } + + /* Clear interrupt */ + gintsts.b.sofintr = 1; + dwc_write_reg32(&hcd->core_if->core_global_regs->gintsts, gintsts.d32); + + return 1; +} + +/** Handles the Rx Status Queue Level Interrupt, which indicates that there is at + * least one packet in the Rx FIFO. The packets are moved from the FIFO to + * memory if the DWC_otg controller is operating in Slave mode. */ +int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t *dwc_otg_hcd) +{ + host_grxsts_data_t grxsts; + dwc_hc_t *hc = NULL; + + DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n"); + + grxsts.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if->core_global_regs->grxstsp); + + hc = dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum]; + + /* Packet Status */ + DWC_DEBUGPL(DBG_HCDV, " Ch num = %d\n", grxsts.b.chnum); + DWC_DEBUGPL(DBG_HCDV, " Count = %d\n", grxsts.b.bcnt); + DWC_DEBUGPL(DBG_HCDV, " DPID = %d, hc.dpid = %d\n", grxsts.b.dpid, hc->data_pid_start); + DWC_DEBUGPL(DBG_HCDV, " PStatus = %d\n", grxsts.b.pktsts); + + switch (grxsts.b.pktsts) { + case DWC_GRXSTS_PKTSTS_IN: + /* Read the data into the host buffer. */ + if (grxsts.b.bcnt > 0) { + dwc_otg_read_packet(dwc_otg_hcd->core_if, + hc->xfer_buff, + grxsts.b.bcnt); + + /* Update the HC fields for the next packet received. */ + hc->xfer_count += grxsts.b.bcnt; + hc->xfer_buff += grxsts.b.bcnt; + } + + case DWC_GRXSTS_PKTSTS_IN_XFER_COMP: + case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR: + case DWC_GRXSTS_PKTSTS_CH_HALTED: + /* Handled in interrupt, just ignore data */ + break; + default: + DWC_ERROR("RX_STS_Q Interrupt: Unknown status %d\n", grxsts.b.pktsts); + break; + } + + return 1; +} + +/** This interrupt occurs when the non-periodic Tx FIFO is half-empty. More + * data packets may be written to the FIFO for OUT transfers. More requests + * may be written to the non-periodic request queue for IN transfers. This + * interrupt is enabled only in Slave mode. */ +int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd) +{ + DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Interrupt--\n"); + dwc_otg_hcd_queue_transactions(dwc_otg_hcd, + DWC_OTG_TRANSACTION_NON_PERIODIC); + return 1; +} + +/** This interrupt occurs when the periodic Tx FIFO is half-empty. More data + * packets may be written to the FIFO for OUT transfers. More requests may be + * written to the periodic request queue for IN transfers. This interrupt is + * enabled only in Slave mode. */ +int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd) +{ + DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interrupt--\n"); + dwc_otg_hcd_queue_transactions(dwc_otg_hcd, + DWC_OTG_TRANSACTION_PERIODIC); + return 1; +} + +/** There are multiple conditions that can cause a port interrupt. This function + * determines which interrupt conditions have occurred and handles them + * appropriately. */ +int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t *dwc_otg_hcd) +{ + int retval = 0; + hprt0_data_t hprt0; + hprt0_data_t hprt0_modify; + + hprt0.d32 = dwc_read_reg32(dwc_otg_hcd->core_if->host_if->hprt0); + hprt0_modify.d32 = dwc_read_reg32(dwc_otg_hcd->core_if->host_if->hprt0); + + /* Clear appropriate bits in HPRT0 to clear the interrupt bit in + * GINTSTS */ + + hprt0_modify.b.prtena = 0; + hprt0_modify.b.prtconndet = 0; + hprt0_modify.b.prtenchng = 0; + hprt0_modify.b.prtovrcurrchng = 0; + + /* Port Connect Detected + * Set flag and clear if detected */ + if (hprt0.b.prtconndet) { + DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x " + "Port Connect Detected--\n", hprt0.d32); + dwc_otg_hcd->flags.b.port_connect_status_change = 1; + dwc_otg_hcd->flags.b.port_connect_status = 1; + hprt0_modify.b.prtconndet = 1; + + /* B-Device has connected, Delete the connection timer. */ + del_timer( &dwc_otg_hcd->conn_timer ); + + /* The Hub driver asserts a reset when it sees port connect + * status change flag */ + retval |= 1; + } + + /* Port Enable Changed + * Clear if detected - Set internal flag if disabled */ + if (hprt0.b.prtenchng) { + DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x " + "Port Enable Changed--\n", hprt0.d32); + hprt0_modify.b.prtenchng = 1; + if (hprt0.b.prtena == 1) { + int do_reset = 0; + dwc_otg_core_params_t *params = dwc_otg_hcd->core_if->core_params; + dwc_otg_core_global_regs_t *global_regs = dwc_otg_hcd->core_if->core_global_regs; + dwc_otg_host_if_t *host_if = dwc_otg_hcd->core_if->host_if; + + /* Check if we need to adjust the PHY clock speed for + * low power and adjust it */ + if (params->host_support_fs_ls_low_power) { + gusbcfg_data_t usbcfg; + + usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); + + if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED || + hprt0.b.prtspd == DWC_HPRT0_PRTSPD_FULL_SPEED) { + /* + * Low power + */ + hcfg_data_t hcfg; + if (usbcfg.b.phylpwrclksel == 0) { + /* Set PHY low power clock select for FS/LS devices */ + usbcfg.b.phylpwrclksel = 1; + dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); + do_reset = 1; + } + + hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg); + + if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED && + params->host_ls_low_power_phy_clk == + DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ) { + /* 6 MHZ */ + DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 6 MHz (Low Power)\n"); + if (hcfg.b.fslspclksel != DWC_HCFG_6_MHZ) { + hcfg.b.fslspclksel = DWC_HCFG_6_MHZ; + dwc_write_reg32(&host_if->host_global_regs->hcfg, + hcfg.d32); + do_reset = 1; + } + } else { + /* 48 MHZ */ + DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 48 MHz ()\n"); + if (hcfg.b.fslspclksel != DWC_HCFG_48_MHZ) { + hcfg.b.fslspclksel = DWC_HCFG_48_MHZ; + dwc_write_reg32(&host_if->host_global_regs->hcfg, + hcfg.d32); + do_reset = 1; + } + } + } else { + /* + * Not low power + */ + if (usbcfg.b.phylpwrclksel == 1) { + usbcfg.b.phylpwrclksel = 0; + dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); + do_reset = 1; + } + } + + if (do_reset) { + tasklet_schedule(dwc_otg_hcd->reset_tasklet); + } + } + + if (!do_reset) { + /* Port has been enabled set the reset change flag */ + dwc_otg_hcd->flags.b.port_reset_change = 1; + } + } else { + dwc_otg_hcd->flags.b.port_enable_change = 1; + } + retval |= 1; + } + + /** Overcurrent Change Interrupt */ + if (hprt0.b.prtovrcurrchng) { + DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x " + "Port Overcurrent Changed--\n", hprt0.d32); + dwc_otg_hcd->flags.b.port_over_current_change = 1; + hprt0_modify.b.prtovrcurrchng = 1; + retval |= 1; + } + + /* Clear Port Interrupts */ + dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32); + + return retval; +} + +/** This interrupt indicates that one or more host channels has a pending + * interrupt. There are multiple conditions that can cause each host channel + * interrupt. This function determines which conditions have occurred for each + * host channel interrupt and handles them appropriately. */ +int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t *dwc_otg_hcd) +{ + int i; + int retval = 0; + haint_data_t haint; + + /* Clear appropriate bits in HCINTn to clear the interrupt bit in + * GINTSTS */ + + haint.d32 = dwc_otg_read_host_all_channels_intr(dwc_otg_hcd->core_if); + + for (i = 0; i < dwc_otg_hcd->core_if->core_params->host_channels; i++) { + if (haint.b2.chint & (1 << i)) { + retval |= dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd, i); + } + } + + return retval; +} + +/* Macro used to clear one channel interrupt */ +#define clear_hc_int(_hc_regs_, _intr_) \ +do { \ + hcint_data_t hcint_clear = {.d32 = 0}; \ + hcint_clear.b._intr_ = 1; \ + dwc_write_reg32(&(_hc_regs_)->hcint, hcint_clear.d32); \ +} while (0) + +/* + * Macro used to disable one channel interrupt. Channel interrupts are + * disabled when the channel is halted or released by the interrupt handler. + * There is no need to handle further interrupts of that type until the + * channel is re-assigned. In fact, subsequent handling may cause crashes + * because the channel structures are cleaned up when the channel is released. + */ +#define disable_hc_int(_hc_regs_, _intr_) \ +do { \ + hcintmsk_data_t hcintmsk = {.d32 = 0}; \ + hcintmsk.b._intr_ = 1; \ + dwc_modify_reg32(&(_hc_regs_)->hcintmsk, hcintmsk.d32, 0); \ +} while (0) + +/** + * Gets the actual length of a transfer after the transfer halts. _halt_status + * holds the reason for the halt. + * + * For IN transfers where halt_status is DWC_OTG_HC_XFER_COMPLETE, + * *short_read is set to 1 upon return if less than the requested + * number of bytes were transferred. Otherwise, *short_read is set to 0 upon + * return. short_read may also be NULL on entry, in which case it remains + * unchanged. + */ +static uint32_t get_actual_xfer_length(dwc_hc_t *hc, + dwc_otg_hc_regs_t *hc_regs, + dwc_otg_qtd_t *qtd, + dwc_otg_halt_status_e halt_status, + int *short_read) +{ + hctsiz_data_t hctsiz; + uint32_t length; + + if (short_read != NULL) { + *short_read = 0; + } + hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); + + if (halt_status == DWC_OTG_HC_XFER_COMPLETE) { + if (hc->ep_is_in) { + length = hc->xfer_len - hctsiz.b.xfersize; + if (short_read != NULL) { + *short_read = (hctsiz.b.xfersize != 0); + } + } else if (hc->qh->do_split) { + length = qtd->ssplit_out_xfer_count; + } else { + length = hc->xfer_len; + } + } else { + /* + * Must use the hctsiz.pktcnt field to determine how much data + * has been transferred. This field reflects the number of + * packets that have been transferred via the USB. This is + * always an integral number of packets if the transfer was + * halted before its normal completion. (Can't use the + * hctsiz.xfersize field because that reflects the number of + * bytes transferred via the AHB, not the USB). + */ + length = (hc->start_pkt_count - hctsiz.b.pktcnt) * hc->max_packet; + } + + return length; +} + +/** + * Updates the state of the URB after a Transfer Complete interrupt on the + * host channel. Updates the actual_length field of the URB based on the + * number of bytes transferred via the host channel. Sets the URB status + * if the data transfer is finished. + * + * @return 1 if the data transfer specified by the URB is completely finished, + * 0 otherwise. + */ +static int update_urb_state_xfer_comp(dwc_hc_t *hc, + dwc_otg_hc_regs_t *hc_regs, + struct urb *urb, + dwc_otg_qtd_t *qtd) +{ + int xfer_done = 0; + int short_read = 0; + int overflow_read=0; + uint32_t len = 0; + int max_packet; + + len = get_actual_xfer_length(hc, hc_regs, qtd, + DWC_OTG_HC_XFER_COMPLETE, + &short_read); + + /* Data overflow case: by Steven */ + if (len > urb->transfer_buffer_length) { + len = urb->transfer_buffer_length; + overflow_read = 1; + } + + /* non DWORD-aligned buffer case handling. */ + if (((uint32_t)hc->xfer_buff & 0x3) && len && hc->qh->dw_align_buf && hc->ep_is_in) { + memcpy(urb->transfer_buffer + urb->actual_length, hc->qh->dw_align_buf, len); + } + urb->actual_length +=len; + + max_packet = usb_maxpacket(urb->dev, urb->pipe, !usb_pipein(urb->pipe)); + if((len) && usb_pipebulk(urb->pipe) && + (urb->transfer_flags & URB_ZERO_PACKET) && + (urb->actual_length == urb->transfer_buffer_length) && + (!(urb->transfer_buffer_length % max_packet))) { + } else if (short_read || urb->actual_length == urb->transfer_buffer_length) { + xfer_done = 1; + if (short_read && (urb->transfer_flags & URB_SHORT_NOT_OK)) { + urb->status = -EREMOTEIO; + } else if (overflow_read) { + urb->status = -EOVERFLOW; + } else { + urb->status = 0; + } + } + +#ifdef DEBUG + { + hctsiz_data_t hctsiz; + hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); + DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n", + __func__, (hc->ep_is_in ? "IN" : "OUT"), hc->hc_num); + DWC_DEBUGPL(DBG_HCDV, " hc->xfer_len %d\n", hc->xfer_len); + DWC_DEBUGPL(DBG_HCDV, " hctsiz.xfersize %d\n", hctsiz.b.xfersize); + DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n", + urb->transfer_buffer_length); + DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", urb->actual_length); + DWC_DEBUGPL(DBG_HCDV, " short_read %d, xfer_done %d\n", + short_read, xfer_done); + } +#endif + + return xfer_done; +} + +/* + * Save the starting data toggle for the next transfer. The data toggle is + * saved in the QH for non-control transfers and it's saved in the QTD for + * control transfers. + */ +static void save_data_toggle(dwc_hc_t *hc, + dwc_otg_hc_regs_t *hc_regs, + dwc_otg_qtd_t *qtd) +{ + hctsiz_data_t hctsiz; + hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); + + if (hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) { + dwc_otg_qh_t *qh = hc->qh; + if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) { + qh->data_toggle = DWC_OTG_HC_PID_DATA0; + } else { + qh->data_toggle = DWC_OTG_HC_PID_DATA1; + } + } else { + if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) { + qtd->data_toggle = DWC_OTG_HC_PID_DATA0; + } else { + qtd->data_toggle = DWC_OTG_HC_PID_DATA1; + } + } +} + +/** + * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic + * QHs, removes the QH from the active non-periodic schedule. If any QTDs are + * still linked to the QH, the QH is added to the end of the inactive + * non-periodic schedule. For periodic QHs, removes the QH from the periodic + * schedule if no more QTDs are linked to the QH. + */ +static void deactivate_qh(dwc_otg_hcd_t *hcd, + dwc_otg_qh_t *qh, + int free_qtd) +{ + int continue_split = 0; + dwc_otg_qtd_t *qtd; + + DWC_DEBUGPL(DBG_HCDV, " %s(%p,%p,%d)\n", __func__, hcd, qh, free_qtd); + + qtd = list_entry(qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); + + if (qtd->complete_split) { + continue_split = 1; + } else if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID || + qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END) { + continue_split = 1; + } + + if (free_qtd) { + dwc_otg_hcd_qtd_remove_and_free(hcd, qtd); + continue_split = 0; + } + + qh->channel = NULL; + qh->qtd_in_process = NULL; + dwc_otg_hcd_qh_deactivate(hcd, qh, continue_split); +} + +/** + * Updates the state of an Isochronous URB when the transfer is stopped for + * any reason. The fields of the current entry in the frame descriptor array + * are set based on the transfer state and the input _halt_status. Completes + * the Isochronous URB if all the URB frames have been completed. + * + * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames remaining to be + * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_URB_COMPLETE. + */ +static dwc_otg_halt_status_e +update_isoc_urb_state(dwc_otg_hcd_t *hcd, + dwc_hc_t *hc, + dwc_otg_hc_regs_t *hc_regs, + dwc_otg_qtd_t *qtd, + dwc_otg_halt_status_e halt_status) +{ + struct urb *urb = qtd->urb; + dwc_otg_halt_status_e ret_val = halt_status; + struct usb_iso_packet_descriptor *frame_desc; + + frame_desc = &urb->iso_frame_desc[qtd->isoc_frame_index]; + switch (halt_status) { + case DWC_OTG_HC_XFER_COMPLETE: + frame_desc->status = 0; + frame_desc->actual_length = + get_actual_xfer_length(hc, hc_regs, qtd, + halt_status, NULL); + + /* non DWORD-aligned buffer case handling. */ + if (frame_desc->actual_length && ((uint32_t)hc->xfer_buff & 0x3) && + hc->qh->dw_align_buf && hc->ep_is_in) { + memcpy(urb->transfer_buffer + frame_desc->offset + qtd->isoc_split_offset, + hc->qh->dw_align_buf, frame_desc->actual_length); + + } + + break; + case DWC_OTG_HC_XFER_FRAME_OVERRUN: + printk("DWC_OTG_HC_XFER_FRAME_OVERRUN: %d\n", halt_status); + urb->error_count++; + if (hc->ep_is_in) { + frame_desc->status = -ENOSR; + } else { + frame_desc->status = -ECOMM; + } + frame_desc->actual_length = 0; + break; + case DWC_OTG_HC_XFER_BABBLE_ERR: + printk("DWC_OTG_HC_XFER_BABBLE_ERR: %d\n", halt_status); + urb->error_count++; + frame_desc->status = -EOVERFLOW; + /* Don't need to update actual_length in this case. */ + break; + case DWC_OTG_HC_XFER_XACT_ERR: + printk("DWC_OTG_HC_XFER_XACT_ERR: %d\n", halt_status); + urb->error_count++; + frame_desc->status = -EPROTO; + frame_desc->actual_length = + get_actual_xfer_length(hc, hc_regs, qtd, + halt_status, NULL); + + /* non DWORD-aligned buffer case handling. */ + if (frame_desc->actual_length && ((uint32_t)hc->xfer_buff & 0x3) && + hc->qh->dw_align_buf && hc->ep_is_in) { + memcpy(urb->transfer_buffer + frame_desc->offset + qtd->isoc_split_offset, + hc->qh->dw_align_buf, frame_desc->actual_length); + + } + break; + default: + + DWC_ERROR("%s: Unhandled _halt_status (%d)\n", __func__, + halt_status); + BUG(); + break; + } + + if (++qtd->isoc_frame_index == urb->number_of_packets) { + /* + * urb->status is not used for isoc transfers. + * The individual frame_desc statuses are used instead. + */ + dwc_otg_hcd_complete_urb(hcd, urb, 0); + ret_val = DWC_OTG_HC_XFER_URB_COMPLETE; + } else { + ret_val = DWC_OTG_HC_XFER_COMPLETE; + } + + return ret_val; +} + +/** + * Releases a host channel for use by other transfers. Attempts to select and + * queue more transactions since at least one host channel is available. + * + * @param hcd The HCD state structure. + * @param hc The host channel to release. + * @param qtd The QTD associated with the host channel. This QTD may be freed + * if the transfer is complete or an error has occurred. + * @param halt_status Reason the channel is being released. This status + * determines the actions taken by this function. + */ +static void release_channel(dwc_otg_hcd_t *hcd, + dwc_hc_t *hc, + dwc_otg_qtd_t *qtd, + dwc_otg_halt_status_e halt_status) +{ + dwc_otg_transaction_type_e tr_type; + int free_qtd; + + DWC_DEBUGPL(DBG_HCDV, " %s: channel %d, halt_status %d\n", + __func__, hc->hc_num, halt_status); + + switch (halt_status) { + case DWC_OTG_HC_XFER_URB_COMPLETE: + free_qtd = 1; + break; + case DWC_OTG_HC_XFER_AHB_ERR: + case DWC_OTG_HC_XFER_STALL: + case DWC_OTG_HC_XFER_BABBLE_ERR: + free_qtd = 1; + break; + case DWC_OTG_HC_XFER_XACT_ERR: + if (qtd->error_count >= 3) { + DWC_DEBUGPL(DBG_HCDV, " Complete URB with transaction error\n"); + free_qtd = 1; + qtd->urb->status = -EPROTO; + dwc_otg_hcd_complete_urb(hcd, qtd->urb, -EPROTO); + } else { + free_qtd = 0; + } + break; + case DWC_OTG_HC_XFER_URB_DEQUEUE: + /* + * The QTD has already been removed and the QH has been + * deactivated. Don't want to do anything except release the + * host channel and try to queue more transfers. + */ + goto cleanup; + case DWC_OTG_HC_XFER_NO_HALT_STATUS: + DWC_ERROR("%s: No halt_status, channel %d\n", __func__, hc->hc_num); + free_qtd = 0; + break; + default: + free_qtd = 0; + break; + } + + deactivate_qh(hcd, hc->qh, free_qtd); + + cleanup: + /* + * Release the host channel for use by other transfers. The cleanup + * function clears the channel interrupt enables and conditions, so + * there's no need to clear the Channel Halted interrupt separately. + */ + dwc_otg_hc_cleanup(hcd->core_if, hc); + list_add_tail(&hc->hc_list_entry, &hcd->free_hc_list); + + switch (hc->ep_type) { + case DWC_OTG_EP_TYPE_CONTROL: + case DWC_OTG_EP_TYPE_BULK: + hcd->non_periodic_channels--; + break; + + default: + /* + * Don't release reservations for periodic channels here. + * That's done when a periodic transfer is descheduled (i.e. + * when the QH is removed from the periodic schedule). + */ + break; + } + + /* Try to queue more transfers now that there's a free channel. */ + tr_type = dwc_otg_hcd_select_transactions(hcd); + if (tr_type != DWC_OTG_TRANSACTION_NONE) { + dwc_otg_hcd_queue_transactions(hcd, tr_type); + } +} + +/** + * Halts a host channel. If the channel cannot be halted immediately because + * the request queue is full, this function ensures that the FIFO empty + * interrupt for the appropriate queue is enabled so that the halt request can + * be queued when there is space in the request queue. + * + * This function may also be called in DMA mode. In that case, the channel is + * simply released since the core always halts the channel automatically in + * DMA mode. + */ +static void halt_channel(dwc_otg_hcd_t *hcd, + dwc_hc_t *hc, + dwc_otg_qtd_t *qtd, + dwc_otg_halt_status_e halt_status) +{ + if (hcd->core_if->dma_enable) { + release_channel(hcd, hc, qtd, halt_status); + return; + } + + /* Slave mode processing... */ + dwc_otg_hc_halt(hcd->core_if, hc, halt_status); + + if (hc->halt_on_queue) { + gintmsk_data_t gintmsk = {.d32 = 0}; + dwc_otg_core_global_regs_t *global_regs; + global_regs = hcd->core_if->core_global_regs; + + if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || + hc->ep_type == DWC_OTG_EP_TYPE_BULK) { + /* + * Make sure the Non-periodic Tx FIFO empty interrupt + * is enabled so that the non-periodic schedule will + * be processed. + */ + gintmsk.b.nptxfempty = 1; + dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32); + } else { + /* + * Move the QH from the periodic queued schedule to + * the periodic assigned schedule. This allows the + * halt to be queued when the periodic schedule is + * processed. + */ + list_move(&hc->qh->qh_list_entry, + &hcd->periodic_sched_assigned); + + /* + * Make sure the Periodic Tx FIFO Empty interrupt is + * enabled so that the periodic schedule will be + * processed. + */ + gintmsk.b.ptxfempty = 1; + dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32); + } + } +} + +/** + * Performs common cleanup for non-periodic transfers after a Transfer + * Complete interrupt. This function should be called after any endpoint type + * specific handling is finished to release the host channel. + */ +static void complete_non_periodic_xfer(dwc_otg_hcd_t *hcd, + dwc_hc_t *hc, + dwc_otg_hc_regs_t *hc_regs, + dwc_otg_qtd_t *qtd, + dwc_otg_halt_status_e halt_status) +{ + hcint_data_t hcint; + + qtd->error_count = 0; + + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + if (hcint.b.nyet) { + /* + * Got a NYET on the last transaction of the transfer. This + * means that the endpoint should be in the PING state at the + * beginning of the next transfer. + */ + hc->qh->ping_state = 1; + clear_hc_int(hc_regs, nyet); + } + + /* + * Always halt and release the host channel to make it available for + * more transfers. There may still be more phases for a control + * transfer or more data packets for a bulk transfer at this point, + * but the host channel is still halted. A channel will be reassigned + * to the transfer when the non-periodic schedule is processed after + * the channel is released. This allows transactions to be queued + * properly via dwc_otg_hcd_queue_transactions, which also enables the + * Tx FIFO Empty interrupt if necessary. + */ + if (hc->ep_is_in) { + /* + * IN transfers in Slave mode require an explicit disable to + * halt the channel. (In DMA mode, this call simply releases + * the channel.) + */ + halt_channel(hcd, hc, qtd, halt_status); + } else { + /* + * The channel is automatically disabled by the core for OUT + * transfers in Slave mode. + */ + release_channel(hcd, hc, qtd, halt_status); + } +} + +/** + * Performs common cleanup for periodic transfers after a Transfer Complete + * interrupt. This function should be called after any endpoint type specific + * handling is finished to release the host channel. + */ +static void complete_periodic_xfer(dwc_otg_hcd_t *hcd, + dwc_hc_t *hc, + dwc_otg_hc_regs_t *hc_regs, + dwc_otg_qtd_t *qtd, + dwc_otg_halt_status_e halt_status) +{ + hctsiz_data_t hctsiz; + qtd->error_count = 0; + + hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); + if (!hc->ep_is_in || hctsiz.b.pktcnt == 0) { + /* Core halts channel in these cases. */ + release_channel(hcd, hc, qtd, halt_status); + } else { + /* Flush any outstanding requests from the Tx queue. */ + halt_channel(hcd, hc, qtd, halt_status); + } +} + +/** + * Handles a host channel Transfer Complete interrupt. This handler may be + * called in either DMA mode or Slave mode. + */ +static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t *hcd, + dwc_hc_t *hc, + dwc_otg_hc_regs_t *hc_regs, + dwc_otg_qtd_t *qtd) +{ + int urb_xfer_done; + dwc_otg_halt_status_e halt_status = DWC_OTG_HC_XFER_COMPLETE; + struct urb *urb = qtd->urb; + int pipe_type = usb_pipetype(urb->pipe); + + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "Transfer Complete--\n", hc->hc_num); + + /* + * Handle xfer complete on CSPLIT. + */ + if (hc->qh->do_split) { + qtd->complete_split = 0; + } + + /* Update the QTD and URB states. */ + switch (pipe_type) { + case PIPE_CONTROL: + switch (qtd->control_phase) { + case DWC_OTG_CONTROL_SETUP: + if (urb->transfer_buffer_length > 0) { + qtd->control_phase = DWC_OTG_CONTROL_DATA; + } else { + qtd->control_phase = DWC_OTG_CONTROL_STATUS; + } + DWC_DEBUGPL(DBG_HCDV, " Control setup transaction done\n"); + halt_status = DWC_OTG_HC_XFER_COMPLETE; + break; + case DWC_OTG_CONTROL_DATA: { + urb_xfer_done = update_urb_state_xfer_comp(hc, hc_regs, urb, qtd); + if (urb_xfer_done) { + qtd->control_phase = DWC_OTG_CONTROL_STATUS; + DWC_DEBUGPL(DBG_HCDV, " Control data transfer done\n"); + } else { + save_data_toggle(hc, hc_regs, qtd); + } + halt_status = DWC_OTG_HC_XFER_COMPLETE; + break; + } + case DWC_OTG_CONTROL_STATUS: + DWC_DEBUGPL(DBG_HCDV, " Control transfer complete\n"); + if (urb->status == -EINPROGRESS) { + urb->status = 0; + } + dwc_otg_hcd_complete_urb(hcd, urb, urb->status); + halt_status = DWC_OTG_HC_XFER_URB_COMPLETE; + break; + } + + complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); + break; + case PIPE_BULK: + DWC_DEBUGPL(DBG_HCDV, " Bulk transfer complete\n"); + urb_xfer_done = update_urb_state_xfer_comp(hc, hc_regs, urb, qtd); + if (urb_xfer_done) { + dwc_otg_hcd_complete_urb(hcd, urb, urb->status); + halt_status = DWC_OTG_HC_XFER_URB_COMPLETE; + } else { + halt_status = DWC_OTG_HC_XFER_COMPLETE; + } + + save_data_toggle(hc, hc_regs, qtd); + complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); + break; + case PIPE_INTERRUPT: + DWC_DEBUGPL(DBG_HCDV, " Interrupt transfer complete\n"); + update_urb_state_xfer_comp(hc, hc_regs, urb, qtd); + + /* + * Interrupt URB is done on the first transfer complete + * interrupt. + */ + dwc_otg_hcd_complete_urb(hcd, urb, urb->status); + save_data_toggle(hc, hc_regs, qtd); + complete_periodic_xfer(hcd, hc, hc_regs, qtd, + DWC_OTG_HC_XFER_URB_COMPLETE); + break; + case PIPE_ISOCHRONOUS: + DWC_DEBUGPL(DBG_HCDV, " Isochronous transfer complete\n"); + if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_ALL) { + halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd, + DWC_OTG_HC_XFER_COMPLETE); + } + complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); + break; + } + + disable_hc_int(hc_regs, xfercompl); + + return 1; +} + +/** + * Handles a host channel STALL interrupt. This handler may be called in + * either DMA mode or Slave mode. + */ +static int32_t handle_hc_stall_intr(dwc_otg_hcd_t *hcd, + dwc_hc_t *hc, + dwc_otg_hc_regs_t *hc_regs, + dwc_otg_qtd_t *qtd) +{ + struct urb *urb = qtd->urb; + int pipe_type = usb_pipetype(urb->pipe); + + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "STALL Received--\n", hc->hc_num); + + if (pipe_type == PIPE_CONTROL) { + dwc_otg_hcd_complete_urb(hcd, urb, -EPIPE); + } + + if (pipe_type == PIPE_BULK || pipe_type == PIPE_INTERRUPT) { + dwc_otg_hcd_complete_urb(hcd, urb, -EPIPE); + /* + * USB protocol requires resetting the data toggle for bulk + * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT) + * setup command is issued to the endpoint. Anticipate the + * CLEAR_FEATURE command since a STALL has occurred and reset + * the data toggle now. + */ + hc->qh->data_toggle = 0; + } + + halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_STALL); + + disable_hc_int(hc_regs, stall); + + return 1; +} + +/* + * Updates the state of the URB when a transfer has been stopped due to an + * abnormal condition before the transfer completes. Modifies the + * actual_length field of the URB to reflect the number of bytes that have + * actually been transferred via the host channel. + */ +static void update_urb_state_xfer_intr(dwc_hc_t *hc, + dwc_otg_hc_regs_t *hc_regs, + struct urb *urb, + dwc_otg_qtd_t *qtd, + dwc_otg_halt_status_e halt_status) +{ + uint32_t bytes_transferred = get_actual_xfer_length(hc, hc_regs, qtd, + halt_status, NULL); + urb->actual_length += bytes_transferred; + +#ifdef DEBUG + { + hctsiz_data_t hctsiz; + hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); + DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n", + __func__, (hc->ep_is_in ? "IN" : "OUT"), hc->hc_num); + DWC_DEBUGPL(DBG_HCDV, " hc->start_pkt_count %d\n", hc->start_pkt_count); + DWC_DEBUGPL(DBG_HCDV, " hctsiz.pktcnt %d\n", hctsiz.b.pktcnt); + DWC_DEBUGPL(DBG_HCDV, " hc->max_packet %d\n", hc->max_packet); + DWC_DEBUGPL(DBG_HCDV, " bytes_transferred %d\n", bytes_transferred); + DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", urb->actual_length); + DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n", + urb->transfer_buffer_length); + } +#endif +} + +/** + * Handles a host channel NAK interrupt. This handler may be called in either + * DMA mode or Slave mode. + */ +static int32_t handle_hc_nak_intr(dwc_otg_hcd_t *hcd, + dwc_hc_t *hc, + dwc_otg_hc_regs_t *hc_regs, + dwc_otg_qtd_t *qtd) +{ + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "NAK Received--\n", hc->hc_num); + + /* + * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and + * interrupt. Re-start the SSPLIT transfer. + */ + if (hc->do_split) { + if (hc->complete_split) { + qtd->error_count = 0; + } + qtd->complete_split = 0; + halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK); + goto handle_nak_done; + } + + switch (usb_pipetype(qtd->urb->pipe)) { + case PIPE_CONTROL: + case PIPE_BULK: + if (hcd->core_if->dma_enable && hc->ep_is_in) { + /* + * NAK interrupts are enabled on bulk/control IN + * transfers in DMA mode for the sole purpose of + * resetting the error count after a transaction error + * occurs. The core will continue transferring data. + */ + qtd->error_count = 0; + goto handle_nak_done; + } + + /* + * NAK interrupts normally occur during OUT transfers in DMA + * or Slave mode. For IN transfers, more requests will be + * queued as request queue space is available. + */ + qtd->error_count = 0; + + if (!hc->qh->ping_state) { + update_urb_state_xfer_intr(hc, hc_regs, qtd->urb, + qtd, DWC_OTG_HC_XFER_NAK); + save_data_toggle(hc, hc_regs, qtd); + if (qtd->urb->dev->speed == USB_SPEED_HIGH) { + hc->qh->ping_state = 1; + } + } + + /* + * Halt the channel so the transfer can be re-started from + * the appropriate point or the PING protocol will + * start/continue. + */ + halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK); + break; + case PIPE_INTERRUPT: + qtd->error_count = 0; + halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK); + break; + case PIPE_ISOCHRONOUS: + /* Should never get called for isochronous transfers. */ + BUG(); + break; + } + + handle_nak_done: + disable_hc_int(hc_regs, nak); + + return 1; +} + +/** + * Handles a host channel ACK interrupt. This interrupt is enabled when + * performing the PING protocol in Slave mode, when errors occur during + * either Slave mode or DMA mode, and during Start Split transactions. + */ +static int32_t handle_hc_ack_intr(dwc_otg_hcd_t *hcd, + dwc_hc_t *hc, + dwc_otg_hc_regs_t *hc_regs, + dwc_otg_qtd_t *qtd) +{ + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "ACK Received--\n", hc->hc_num); + + if (hc->do_split) { + /* + * Handle ACK on SSPLIT. + * ACK should not occur in CSPLIT. + */ + if (!hc->ep_is_in && hc->data_pid_start != DWC_OTG_HC_PID_SETUP) { + qtd->ssplit_out_xfer_count = hc->xfer_len; + } + if (!(hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in)) { + /* Don't need complete for isochronous out transfers. */ + qtd->complete_split = 1; + } + + /* ISOC OUT */ + if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) { + switch (hc->xact_pos) { + case DWC_HCSPLIT_XACTPOS_ALL: + break; + case DWC_HCSPLIT_XACTPOS_END: + qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL; + qtd->isoc_split_offset = 0; + break; + case DWC_HCSPLIT_XACTPOS_BEGIN: + case DWC_HCSPLIT_XACTPOS_MID: + /* + * For BEGIN or MID, calculate the length for + * the next microframe to determine the correct + * SSPLIT token, either MID or END. + */ + { + struct usb_iso_packet_descriptor *frame_desc; + + frame_desc = &qtd->urb->iso_frame_desc[qtd->isoc_frame_index]; + qtd->isoc_split_offset += 188; + + if ((frame_desc->length - qtd->isoc_split_offset) <= 188) { + qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_END; + } else { + qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_MID; + } + + } + break; + } + } else { + halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK); + } + } else { + qtd->error_count = 0; + + if (hc->qh->ping_state) { + hc->qh->ping_state = 0; + /* + * Halt the channel so the transfer can be re-started + * from the appropriate point. This only happens in + * Slave mode. In DMA mode, the ping_state is cleared + * when the transfer is started because the core + * automatically executes the PING, then the transfer. + */ + halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK); + } + } + + /* + * If the ACK occurred when _not_ in the PING state, let the channel + * continue transferring data after clearing the error count. + */ + + disable_hc_int(hc_regs, ack); + + return 1; +} + +/** + * Handles a host channel NYET interrupt. This interrupt should only occur on + * Bulk and Control OUT endpoints and for complete split transactions. If a + * NYET occurs at the same time as a Transfer Complete interrupt, it is + * handled in the xfercomp interrupt handler, not here. This handler may be + * called in either DMA mode or Slave mode. + */ +static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t *hcd, + dwc_hc_t *hc, + dwc_otg_hc_regs_t *hc_regs, + dwc_otg_qtd_t *qtd) +{ + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "NYET Received--\n", hc->hc_num); + + /* + * NYET on CSPLIT + * re-do the CSPLIT immediately on non-periodic + */ + if (hc->do_split && hc->complete_split) { + if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || + hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + int frnum = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(hcd)); + + if (dwc_full_frame_num(frnum) != + dwc_full_frame_num(hc->qh->sched_frame)) { + /* + * No longer in the same full speed frame. + * Treat this as a transaction error. + */ +#if 0 + /** @todo Fix system performance so this can + * be treated as an error. Right now complete + * splits cannot be scheduled precisely enough + * due to other system activity, so this error + * occurs regularly in Slave mode. + */ + qtd->error_count++; +#endif + qtd->complete_split = 0; + halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); + /** @todo add support for isoc release */ + goto handle_nyet_done; + } + } + + halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET); + goto handle_nyet_done; + } + + hc->qh->ping_state = 1; + qtd->error_count = 0; + + update_urb_state_xfer_intr(hc, hc_regs, qtd->urb, qtd, + DWC_OTG_HC_XFER_NYET); + save_data_toggle(hc, hc_regs, qtd); + + /* + * Halt the channel and re-start the transfer so the PING + * protocol will start. + */ + halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET); + +handle_nyet_done: + disable_hc_int(hc_regs, nyet); + return 1; +} + +/** + * Handles a host channel babble interrupt. This handler may be called in + * either DMA mode or Slave mode. + */ +static int32_t handle_hc_babble_intr(dwc_otg_hcd_t *hcd, + dwc_hc_t *hc, + dwc_otg_hc_regs_t *hc_regs, + dwc_otg_qtd_t *qtd) +{ + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "Babble Error--\n", hc->hc_num); + if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { + dwc_otg_hcd_complete_urb(hcd, qtd->urb, -EOVERFLOW); + halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_BABBLE_ERR); + } else { + dwc_otg_halt_status_e halt_status; + halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd, + DWC_OTG_HC_XFER_BABBLE_ERR); + halt_channel(hcd, hc, qtd, halt_status); + } + disable_hc_int(hc_regs, bblerr); + return 1; +} + +/** + * Handles a host channel AHB error interrupt. This handler is only called in + * DMA mode. + */ +static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t *hcd, + dwc_hc_t *hc, + dwc_otg_hc_regs_t *hc_regs, + dwc_otg_qtd_t *qtd) +{ + hcchar_data_t hcchar; + hcsplt_data_t hcsplt; + hctsiz_data_t hctsiz; + uint32_t hcdma; + struct urb *urb = qtd->urb; + + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "AHB Error--\n", hc->hc_num); + + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt); + hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); + hcdma = dwc_read_reg32(&hc_regs->hcdma); + + DWC_ERROR("AHB ERROR, Channel %d\n", hc->hc_num); + DWC_ERROR(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32); + DWC_ERROR(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma); + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n"); + DWC_ERROR(" Device address: %d\n", usb_pipedevice(urb->pipe)); + DWC_ERROR(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe), + (usb_pipein(urb->pipe) ? "IN" : "OUT")); + DWC_ERROR(" Endpoint type: %s\n", + ({char *pipetype; + switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: pipetype = "CONTROL"; break; + case PIPE_BULK: pipetype = "BULK"; break; + case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break; + case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break; + default: pipetype = "UNKNOWN"; break; + }; pipetype;})); + DWC_ERROR(" Speed: %s\n", + ({char *speed; + switch (urb->dev->speed) { + case USB_SPEED_HIGH: speed = "HIGH"; break; + case USB_SPEED_FULL: speed = "FULL"; break; + case USB_SPEED_LOW: speed = "LOW"; break; + default: speed = "UNKNOWN"; break; + }; speed;})); + DWC_ERROR(" Max packet size: %d\n", + usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))); + DWC_ERROR(" Data buffer length: %d\n", urb->transfer_buffer_length); + DWC_ERROR(" Transfer buffer: %p, Transfer DMA: %p\n", + urb->transfer_buffer, (void *)urb->transfer_dma); + DWC_ERROR(" Setup buffer: %p, Setup DMA: %p\n", + urb->setup_packet, (void *)urb->setup_dma); + DWC_ERROR(" Interval: %d\n", urb->interval); + + dwc_otg_hcd_complete_urb(hcd, urb, -EIO); + + /* + * Force a channel halt. Don't call halt_channel because that won't + * write to the HCCHARn register in DMA mode to force the halt. + */ + dwc_otg_hc_halt(hcd->core_if, hc, DWC_OTG_HC_XFER_AHB_ERR); + + disable_hc_int(hc_regs, ahberr); + return 1; +} + +/** + * Handles a host channel transaction error interrupt. This handler may be + * called in either DMA mode or Slave mode. + */ +static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t *hcd, + dwc_hc_t *hc, + dwc_otg_hc_regs_t *hc_regs, + dwc_otg_qtd_t *qtd) +{ + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "Transaction Error--\n", hc->hc_num); + + switch (usb_pipetype(qtd->urb->pipe)) { + case PIPE_CONTROL: + case PIPE_BULK: + qtd->error_count++; + if (!hc->qh->ping_state) { + update_urb_state_xfer_intr(hc, hc_regs, qtd->urb, + qtd, DWC_OTG_HC_XFER_XACT_ERR); + save_data_toggle(hc, hc_regs, qtd); + if (!hc->ep_is_in && qtd->urb->dev->speed == USB_SPEED_HIGH) { + hc->qh->ping_state = 1; + } + } + + /* + * Halt the channel so the transfer can be re-started from + * the appropriate point or the PING protocol will start. + */ + halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); + break; + case PIPE_INTERRUPT: + qtd->error_count++; + if (hc->do_split && hc->complete_split) { + qtd->complete_split = 0; + } + halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); + break; + case PIPE_ISOCHRONOUS: + { + dwc_otg_halt_status_e halt_status; + halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd, + DWC_OTG_HC_XFER_XACT_ERR); + + halt_channel(hcd, hc, qtd, halt_status); + } + break; + } + + disable_hc_int(hc_regs, xacterr); + + return 1; +} + +/** + * Handles a host channel frame overrun interrupt. This handler may be called + * in either DMA mode or Slave mode. + */ +static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t *hcd, + dwc_hc_t *hc, + dwc_otg_hc_regs_t *hc_regs, + dwc_otg_qtd_t *qtd) +{ + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "Frame Overrun--\n", hc->hc_num); + + switch (usb_pipetype(qtd->urb->pipe)) { + case PIPE_CONTROL: + case PIPE_BULK: + break; + case PIPE_INTERRUPT: + halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_FRAME_OVERRUN); + break; + case PIPE_ISOCHRONOUS: + { + dwc_otg_halt_status_e halt_status; + halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd, + DWC_OTG_HC_XFER_FRAME_OVERRUN); + + halt_channel(hcd, hc, qtd, halt_status); + } + break; + } + + disable_hc_int(hc_regs, frmovrun); + + return 1; +} + +/** + * Handles a host channel data toggle error interrupt. This handler may be + * called in either DMA mode or Slave mode. + */ +static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t *hcd, + dwc_hc_t *hc, + dwc_otg_hc_regs_t *hc_regs, + dwc_otg_qtd_t *qtd) +{ + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "Data Toggle Error--\n", hc->hc_num); + + if (hc->ep_is_in) { + qtd->error_count = 0; + } else { + DWC_ERROR("Data Toggle Error on OUT transfer," + "channel %d\n", hc->hc_num); + } + + disable_hc_int(hc_regs, datatglerr); + + return 1; +} + +#ifdef DEBUG +/** + * This function is for debug only. It checks that a valid halt status is set + * and that HCCHARn.chdis is clear. If there's a problem, corrective action is + * taken and a warning is issued. + * @return 1 if halt status is ok, 0 otherwise. + */ +static inline int halt_status_ok(dwc_otg_hcd_t *hcd, + dwc_hc_t *hc, + dwc_otg_hc_regs_t *hc_regs, + dwc_otg_qtd_t *qtd) +{ + hcchar_data_t hcchar; + hctsiz_data_t hctsiz; + hcint_data_t hcint; + hcintmsk_data_t hcintmsk; + hcsplt_data_t hcsplt; + + if (hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS) { + /* + * This code is here only as a check. This condition should + * never happen. Ignore the halt if it does occur. + */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk); + hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt); + DWC_WARN("%s: hc->halt_status == DWC_OTG" + "channel %d, hcchar 0x%08x, hctsiz 0x%08x, " + "hcint 0x%08x, hcintmsk 0x%08x, " + "hcsplt 0x%08x, qtd->complete_split %d\n", + __func__, hc->hc_num, hcchar.d32, hctsiz.d32, + hcint.d32, hcintmsk.d32, + hcsplt.d32, qtd->complete_split); + + DWC_WARN("%s: no halt status, channel %d, ignoring interrupt\n", + __func__, hc->hc_num); + DWC_WARN("\n"); + clear_hc_int(hc_regs, chhltd); + return 0; + } + + /* + * This code is here only as a check. hcchar.chdis should + * never be set when the halt interrupt occurs. Halt the + * channel again if it does occur. + */ + hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); + if (hcchar.b.chdis) { + DWC_WARN("%s: hcchar.chdis set unexpectedly, " + "hcchar 0x%08x, trying to halt again\n", + __func__, hcchar.d32); + clear_hc_int(hc_regs, chhltd); + hc->halt_pending = 0; + halt_channel(hcd, hc, qtd, hc->halt_status); + return 0; + } + + return 1; +} +#endif + +/** + * Handles a host Channel Halted interrupt in DMA mode. This handler + * determines the reason the channel halted and proceeds accordingly. + */ +static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t *hcd, + dwc_hc_t *hc, + dwc_otg_hc_regs_t *hc_regs, + dwc_otg_qtd_t *qtd) +{ + hcint_data_t hcint; + hcintmsk_data_t hcintmsk; + int out_nak_enh = 0; + + /* For core with OUT NAK enhancement, the flow for high- + * speed CONTROL/BULK OUT is handled a little differently. + */ + if (hcd->core_if->snpsid >= 0x4F54271A) { + if (hc->speed == DWC_OTG_EP_SPEED_HIGH && !hc->ep_is_in && + (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || + hc->ep_type == DWC_OTG_EP_TYPE_BULK)) { + printk(KERN_DEBUG "OUT NAK enhancement enabled\n"); + out_nak_enh = 1; + } else { + printk(KERN_DEBUG "OUT NAK enhancement disabled, not HS Ctrl/Bulk OUT EP\n"); + } + } else { +// printk(KERN_DEBUG "OUT NAK enhancement disabled, no core support\n"); + } + + if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE || + hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR) { + /* + * Just release the channel. A dequeue can happen on a + * transfer timeout. In the case of an AHB Error, the channel + * was forced to halt because there's no way to gracefully + * recover. + */ + release_channel(hcd, hc, qtd, hc->halt_status); + return; + } + + /* Read the HCINTn register to determine the cause for the halt. */ + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk); + + if (hcint.b.xfercomp) { + /** @todo This is here because of a possible hardware bug. Spec + * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT + * interrupt w/ACK bit set should occur, but I only see the + * XFERCOMP bit, even with it masked out. This is a workaround + * for that behavior. Should fix this when hardware is fixed. + */ + if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) { + handle_hc_ack_intr(hcd, hc, hc_regs, qtd); + } + handle_hc_xfercomp_intr(hcd, hc, hc_regs, qtd); + } else if (hcint.b.stall) { + handle_hc_stall_intr(hcd, hc, hc_regs, qtd); + } else if (hcint.b.xacterr) { + if (out_nak_enh) { + if (hcint.b.nyet || hcint.b.nak || hcint.b.ack) { + printk(KERN_DEBUG "XactErr with NYET/NAK/ACK\n"); + qtd->error_count = 0; + } else { + printk(KERN_DEBUG "XactErr without NYET/NAK/ACK\n"); + } + } + + /* + * Must handle xacterr before nak or ack. Could get a xacterr + * at the same time as either of these on a BULK/CONTROL OUT + * that started with a PING. The xacterr takes precedence. + */ + handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd); + } else if (!out_nak_enh) { + if (hcint.b.nyet) { + /* + * Must handle nyet before nak or ack. Could get a nyet at the + * same time as either of those on a BULK/CONTROL OUT that + * started with a PING. The nyet takes precedence. + */ + handle_hc_nyet_intr(hcd, hc, hc_regs, qtd); + } else if (hcint.b.bblerr) { + handle_hc_babble_intr(hcd, hc, hc_regs, qtd); + } else if (hcint.b.frmovrun) { + handle_hc_frmovrun_intr(hcd, hc, hc_regs, qtd); + } else if (hcint.b.nak && !hcintmsk.b.nak) { + /* + * If nak is not masked, it's because a non-split IN transfer + * is in an error state. In that case, the nak is handled by + * the nak interrupt handler, not here. Handle nak here for + * BULK/CONTROL OUT transfers, which halt on a NAK to allow + * rewinding the buffer pointer. + */ + handle_hc_nak_intr(hcd, hc, hc_regs, qtd); + } else if (hcint.b.ack && !hcintmsk.b.ack) { + /* + * If ack is not masked, it's because a non-split IN transfer + * is in an error state. In that case, the ack is handled by + * the ack interrupt handler, not here. Handle ack here for + * split transfers. Start splits halt on ACK. + */ + handle_hc_ack_intr(hcd, hc, hc_regs, qtd); + } else { + if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || + hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { + /* + * A periodic transfer halted with no other channel + * interrupts set. Assume it was halted by the core + * because it could not be completed in its scheduled + * (micro)frame. + */ +#ifdef DEBUG + DWC_PRINT("%s: Halt channel %d (assume incomplete periodic transfer)\n", + __func__, hc->hc_num); +#endif + halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE); + } else { + DWC_ERROR("%s: Channel %d, DMA Mode -- ChHltd set, but reason " + "for halting is unknown, hcint 0x%08x, intsts 0x%08x\n", + __func__, hc->hc_num, hcint.d32, + dwc_read_reg32(&hcd->core_if->core_global_regs->gintsts)); + } + } + } else { + printk(KERN_DEBUG "NYET/NAK/ACK/other in non-error case, 0x%08x\n", hcint.d32); + } +} + +/** + * Handles a host channel Channel Halted interrupt. + * + * In slave mode, this handler is called only when the driver specifically + * requests a halt. This occurs during handling other host channel interrupts + * (e.g. nak, xacterr, stall, nyet, etc.). + * + * In DMA mode, this is the interrupt that occurs when the core has finished + * processing a transfer on a channel. Other host channel interrupts (except + * ahberr) are disabled in DMA mode. + */ +static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t *hcd, + dwc_hc_t *hc, + dwc_otg_hc_regs_t *hc_regs, + dwc_otg_qtd_t *qtd) +{ + DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " + "Channel Halted--\n", hc->hc_num); + + if (hcd->core_if->dma_enable) { + handle_hc_chhltd_intr_dma(hcd, hc, hc_regs, qtd); + } else { +#ifdef DEBUG + if (!halt_status_ok(hcd, hc, hc_regs, qtd)) { + return 1; + } +#endif + release_channel(hcd, hc, qtd, hc->halt_status); + } + + return 1; +} + +/** Handles interrupt for a specific Host Channel */ +int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t *dwc_otg_hcd, uint32_t num) +{ + int retval = 0; + hcint_data_t hcint; + hcintmsk_data_t hcintmsk; + dwc_hc_t *hc; + dwc_otg_hc_regs_t *hc_regs; + dwc_otg_qtd_t *qtd; + + DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", num); + + hc = dwc_otg_hcd->hc_ptr_array[num]; + hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[num]; + qtd = list_entry(hc->qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); + + hcint.d32 = dwc_read_reg32(&hc_regs->hcint); + hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk); + DWC_DEBUGPL(DBG_HCDV, " hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n", + hcint.d32, hcintmsk.d32, (hcint.d32 & hcintmsk.d32)); + hcint.d32 = hcint.d32 & hcintmsk.d32; + + if (!dwc_otg_hcd->core_if->dma_enable) { + if (hcint.b.chhltd && hcint.d32 != 0x2) { + hcint.b.chhltd = 0; + } + } + + if (hcint.b.xfercomp) { + retval |= handle_hc_xfercomp_intr(dwc_otg_hcd, hc, hc_regs, qtd); + /* + * If NYET occurred at same time as Xfer Complete, the NYET is + * handled by the Xfer Complete interrupt handler. Don't want + * to call the NYET interrupt handler in this case. + */ + hcint.b.nyet = 0; + } + if (hcint.b.chhltd) { + retval |= handle_hc_chhltd_intr(dwc_otg_hcd, hc, hc_regs, qtd); + } + if (hcint.b.ahberr) { + retval |= handle_hc_ahberr_intr(dwc_otg_hcd, hc, hc_regs, qtd); + } + if (hcint.b.stall) { + retval |= handle_hc_stall_intr(dwc_otg_hcd, hc, hc_regs, qtd); + } + if (hcint.b.nak) { + retval |= handle_hc_nak_intr(dwc_otg_hcd, hc, hc_regs, qtd); + } + if (hcint.b.ack) { + retval |= handle_hc_ack_intr(dwc_otg_hcd, hc, hc_regs, qtd); + } + if (hcint.b.nyet) { + retval |= handle_hc_nyet_intr(dwc_otg_hcd, hc, hc_regs, qtd); + } + if (hcint.b.xacterr) { + retval |= handle_hc_xacterr_intr(dwc_otg_hcd, hc, hc_regs, qtd); + } + if (hcint.b.bblerr) { + retval |= handle_hc_babble_intr(dwc_otg_hcd, hc, hc_regs, qtd); + } + if (hcint.b.frmovrun) { + retval |= handle_hc_frmovrun_intr(dwc_otg_hcd, hc, hc_regs, qtd); + } + if (hcint.b.datatglerr) { + retval |= handle_hc_datatglerr_intr(dwc_otg_hcd, hc, hc_regs, qtd); + } + + return retval; +} + +#endif /* DWC_DEVICE_ONLY */ diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c new file mode 100644 index 0000000000..cfb1f16410 --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c @@ -0,0 +1,684 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd_queue.c $ + * $Revision: 1.5 $ + * $Date: 2008-12-15 06:51:32 $ + * $Change: 537387 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ +#ifndef DWC_DEVICE_ONLY + +/** + * @file + * + * This file contains the functions to manage Queue Heads and Queue + * Transfer Descriptors. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/string.h> +#include <linux/dma-mapping.h> + +#include "dwc_otg_driver.h" +#include "dwc_otg_hcd.h" +#include "dwc_otg_regs.h" + +/** + * This function allocates and initializes a QH. + * + * @param hcd The HCD state structure for the DWC OTG controller. + * @param[in] urb Holds the information about the device/endpoint that we need + * to initialize the QH. + * + * @return Returns pointer to the newly allocated QH, or NULL on error. */ +dwc_otg_qh_t *dwc_otg_hcd_qh_create (dwc_otg_hcd_t *hcd, struct urb *urb) +{ + dwc_otg_qh_t *qh; + + /* Allocate memory */ + /** @todo add memflags argument */ + qh = dwc_otg_hcd_qh_alloc (); + if (qh == NULL) { + return NULL; + } + + dwc_otg_hcd_qh_init (hcd, qh, urb); + return qh; +} + +/** Free each QTD in the QH's QTD-list then free the QH. QH should already be + * removed from a list. QTD list should already be empty if called from URB + * Dequeue. + * + * @param[in] hcd HCD instance. + * @param[in] qh The QH to free. + */ +void dwc_otg_hcd_qh_free (dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) +{ + dwc_otg_qtd_t *qtd; + struct list_head *pos; + unsigned long flags; + + /* Free each QTD in the QTD list */ + SPIN_LOCK_IRQSAVE(&hcd->lock, flags) + for (pos = qh->qtd_list.next; + pos != &qh->qtd_list; + pos = qh->qtd_list.next) + { + list_del (pos); + qtd = dwc_list_to_qtd (pos); + dwc_otg_hcd_qtd_free (qtd); + } + SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags) + + if (qh->dw_align_buf) { + dma_free_coherent((dwc_otg_hcd_to_hcd(hcd))->self.controller, + hcd->core_if->core_params->max_transfer_size, + qh->dw_align_buf, + qh->dw_align_buf_dma); + } + + kfree (qh); + return; +} + +/** Initializes a QH structure. + * + * @param[in] hcd The HCD state structure for the DWC OTG controller. + * @param[in] qh The QH to init. + * @param[in] urb Holds the information about the device/endpoint that we need + * to initialize the QH. */ +#define SCHEDULE_SLOP 10 +void dwc_otg_hcd_qh_init(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, struct urb *urb) +{ + char *speed, *type; + memset (qh, 0, sizeof (dwc_otg_qh_t)); + + /* Initialize QH */ + switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: + qh->ep_type = USB_ENDPOINT_XFER_CONTROL; + break; + case PIPE_BULK: + qh->ep_type = USB_ENDPOINT_XFER_BULK; + break; + case PIPE_ISOCHRONOUS: + qh->ep_type = USB_ENDPOINT_XFER_ISOC; + break; + case PIPE_INTERRUPT: + qh->ep_type = USB_ENDPOINT_XFER_INT; + break; + } + + qh->ep_is_in = usb_pipein(urb->pipe) ? 1 : 0; + + qh->data_toggle = DWC_OTG_HC_PID_DATA0; + qh->maxp = usb_maxpacket(urb->dev, urb->pipe, !(usb_pipein(urb->pipe))); + INIT_LIST_HEAD(&qh->qtd_list); + INIT_LIST_HEAD(&qh->qh_list_entry); + qh->channel = NULL; + + /* FS/LS Enpoint on HS Hub + * NOT virtual root hub */ + qh->do_split = 0; + if (((urb->dev->speed == USB_SPEED_LOW) || + (urb->dev->speed == USB_SPEED_FULL)) && + (urb->dev->tt) && (urb->dev->tt->hub) && (urb->dev->tt->hub->devnum != 1)) + { + DWC_DEBUGPL(DBG_HCD, "QH init: EP %d: TT found at hub addr %d, for port %d\n", + usb_pipeendpoint(urb->pipe), urb->dev->tt->hub->devnum, + urb->dev->ttport); + qh->do_split = 1; + } + + if (qh->ep_type == USB_ENDPOINT_XFER_INT || + qh->ep_type == USB_ENDPOINT_XFER_ISOC) { + /* Compute scheduling parameters once and save them. */ + hprt0_data_t hprt; + + /** @todo Account for split transfers in the bus time. */ + int bytecount = dwc_hb_mult(qh->maxp) * dwc_max_packet(qh->maxp); + + /* FIXME: work-around patch by Steven */ + qh->usecs = NS_TO_US(usb_calc_bus_time(urb->dev->speed, + usb_pipein(urb->pipe), + (qh->ep_type == USB_ENDPOINT_XFER_ISOC), + bytecount)); + + /* Start in a slightly future (micro)frame. */ + qh->sched_frame = dwc_frame_num_inc(hcd->frame_number, + SCHEDULE_SLOP); + qh->interval = urb->interval; +#if 0 + /* Increase interrupt polling rate for debugging. */ + if (qh->ep_type == USB_ENDPOINT_XFER_INT) { + qh->interval = 8; + } +#endif + hprt.d32 = dwc_read_reg32(hcd->core_if->host_if->hprt0); + if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) && + ((urb->dev->speed == USB_SPEED_LOW) || + (urb->dev->speed == USB_SPEED_FULL))) { + qh->interval *= 8; + qh->sched_frame |= 0x7; + qh->start_split_frame = qh->sched_frame; + } + + } + + DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n"); + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - qh = %p\n", qh); + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Device Address = %d\n", + urb->dev->devnum); + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Endpoint %d, %s\n", + usb_pipeendpoint(urb->pipe), + usb_pipein(urb->pipe) == USB_DIR_IN ? "IN" : "OUT"); + + switch(urb->dev->speed) { + case USB_SPEED_LOW: + speed = "low"; + break; + case USB_SPEED_FULL: + speed = "full"; + break; + case USB_SPEED_HIGH: + speed = "high"; + break; + default: + speed = "?"; + break; + } + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Speed = %s\n", speed); + + switch (qh->ep_type) { + case USB_ENDPOINT_XFER_ISOC: + type = "isochronous"; + break; + case USB_ENDPOINT_XFER_INT: + type = "interrupt"; + break; + case USB_ENDPOINT_XFER_CONTROL: + type = "control"; + break; + case USB_ENDPOINT_XFER_BULK: + type = "bulk"; + break; + default: + type = "?"; + break; + } + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Type = %s\n",type); + +#ifdef DEBUG + if (qh->ep_type == USB_ENDPOINT_XFER_INT) { + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs = %d\n", + qh->usecs); + DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - interval = %d\n", + qh->interval); + } +#endif + qh->dw_align_buf = NULL; + return; +} + +/** + * Checks that a channel is available for a periodic transfer. + * + * @return 0 if successful, negative error code otherise. + */ +static int periodic_channel_available(dwc_otg_hcd_t *hcd) +{ + /* + * Currently assuming that there is a dedicated host channnel for each + * periodic transaction plus at least one host channel for + * non-periodic transactions. + */ + int status; + int num_channels; + + num_channels = hcd->core_if->core_params->host_channels; + if ((hcd->periodic_channels + hcd->non_periodic_channels < num_channels) && + (hcd->periodic_channels < num_channels - 1)) { + status = 0; + } + else { + DWC_NOTICE("%s: Total channels: %d, Periodic: %d, Non-periodic: %d\n", + __func__, num_channels, hcd->periodic_channels, + hcd->non_periodic_channels); + status = -ENOSPC; + } + + return status; +} + +/** + * Checks that there is sufficient bandwidth for the specified QH in the + * periodic schedule. For simplicity, this calculation assumes that all the + * transfers in the periodic schedule may occur in the same (micro)frame. + * + * @param hcd The HCD state structure for the DWC OTG controller. + * @param qh QH containing periodic bandwidth required. + * + * @return 0 if successful, negative error code otherwise. + */ +static int check_periodic_bandwidth(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) +{ + int status; + uint16_t max_claimed_usecs; + + status = 0; + + if (hcd->core_if->core_params->speed == DWC_SPEED_PARAM_HIGH) { + /* + * High speed mode. + * Max periodic usecs is 80% x 125 usec = 100 usec. + */ + max_claimed_usecs = 100 - qh->usecs; + } else { + /* + * Full speed mode. + * Max periodic usecs is 90% x 1000 usec = 900 usec. + */ + max_claimed_usecs = 900 - qh->usecs; + } + + if (hcd->periodic_usecs > max_claimed_usecs) { + DWC_NOTICE("%s: already claimed usecs %d, required usecs %d\n", + __func__, hcd->periodic_usecs, qh->usecs); + status = -ENOSPC; + } + + return status; +} + +/** + * Checks that the max transfer size allowed in a host channel is large enough + * to handle the maximum data transfer in a single (micro)frame for a periodic + * transfer. + * + * @param hcd The HCD state structure for the DWC OTG controller. + * @param qh QH for a periodic endpoint. + * + * @return 0 if successful, negative error code otherwise. + */ +static int check_max_xfer_size(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) +{ + int status; + uint32_t max_xfer_size; + uint32_t max_channel_xfer_size; + + status = 0; + + max_xfer_size = dwc_max_packet(qh->maxp) * dwc_hb_mult(qh->maxp); + max_channel_xfer_size = hcd->core_if->core_params->max_transfer_size; + + if (max_xfer_size > max_channel_xfer_size) { + DWC_NOTICE("%s: Periodic xfer length %d > " + "max xfer length for channel %d\n", + __func__, max_xfer_size, max_channel_xfer_size); + status = -ENOSPC; + } + + return status; +} + +/** + * Schedules an interrupt or isochronous transfer in the periodic schedule. + * + * @param hcd The HCD state structure for the DWC OTG controller. + * @param qh QH for the periodic transfer. The QH should already contain the + * scheduling information. + * + * @return 0 if successful, negative error code otherwise. + */ +static int schedule_periodic(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) +{ + int status = 0; + + status = periodic_channel_available(hcd); + if (status) { + DWC_NOTICE("%s: No host channel available for periodic " + "transfer.\n", __func__); + return status; + } + + status = check_periodic_bandwidth(hcd, qh); + if (status) { + DWC_NOTICE("%s: Insufficient periodic bandwidth for " + "periodic transfer.\n", __func__); + return status; + } + + status = check_max_xfer_size(hcd, qh); + if (status) { + DWC_NOTICE("%s: Channel max transfer size too small " + "for periodic transfer.\n", __func__); + return status; + } + + /* Always start in the inactive schedule. */ + list_add_tail(&qh->qh_list_entry, &hcd->periodic_sched_inactive); + + /* Reserve the periodic channel. */ + hcd->periodic_channels++; + + /* Update claimed usecs per (micro)frame. */ + hcd->periodic_usecs += qh->usecs; + + /* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */ + hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_allocated += qh->usecs / qh->interval; + if (qh->ep_type == USB_ENDPOINT_XFER_INT) { + hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_int_reqs++; + DWC_DEBUGPL(DBG_HCD, "Scheduled intr: qh %p, usecs %d, period %d\n", + qh, qh->usecs, qh->interval); + } else { + hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_isoc_reqs++; + DWC_DEBUGPL(DBG_HCD, "Scheduled isoc: qh %p, usecs %d, period %d\n", + qh, qh->usecs, qh->interval); + } + + return status; +} + +/** + * This function adds a QH to either the non periodic or periodic schedule if + * it is not already in the schedule. If the QH is already in the schedule, no + * action is taken. + * + * @return 0 if successful, negative error code otherwise. + */ +int dwc_otg_hcd_qh_add (dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) +{ + unsigned long flags; + int status = 0; + + SPIN_LOCK_IRQSAVE(&hcd->lock, flags) + + if (!list_empty(&qh->qh_list_entry)) { + /* QH already in a schedule. */ + goto done; + } + + /* Add the new QH to the appropriate schedule */ + if (dwc_qh_is_non_per(qh)) { + /* Always start in the inactive schedule. */ + list_add_tail(&qh->qh_list_entry, &hcd->non_periodic_sched_inactive); + } else { + status = schedule_periodic(hcd, qh); + } + + done: + SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags) + + return status; +} + +/** + * Removes an interrupt or isochronous transfer from the periodic schedule. + * + * @param hcd The HCD state structure for the DWC OTG controller. + * @param qh QH for the periodic transfer. + */ +static void deschedule_periodic(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) +{ + list_del_init(&qh->qh_list_entry); + + /* Release the periodic channel reservation. */ + hcd->periodic_channels--; + + /* Update claimed usecs per (micro)frame. */ + hcd->periodic_usecs -= qh->usecs; + + /* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */ + hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_allocated -= qh->usecs / qh->interval; + + if (qh->ep_type == USB_ENDPOINT_XFER_INT) { + hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_int_reqs--; + DWC_DEBUGPL(DBG_HCD, "Descheduled intr: qh %p, usecs %d, period %d\n", + qh, qh->usecs, qh->interval); + } else { + hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_isoc_reqs--; + DWC_DEBUGPL(DBG_HCD, "Descheduled isoc: qh %p, usecs %d, period %d\n", + qh, qh->usecs, qh->interval); + } +} + +/** + * Removes a QH from either the non-periodic or periodic schedule. Memory is + * not freed. + * + * @param[in] hcd The HCD state structure. + * @param[in] qh QH to remove from schedule. */ +void dwc_otg_hcd_qh_remove (dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) +{ + unsigned long flags; + + SPIN_LOCK_IRQSAVE(&hcd->lock, flags); + + if (list_empty(&qh->qh_list_entry)) { + /* QH is not in a schedule. */ + goto done; + } + + if (dwc_qh_is_non_per(qh)) { + if (hcd->non_periodic_qh_ptr == &qh->qh_list_entry) { + hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next; + } + list_del_init(&qh->qh_list_entry); + } else { + deschedule_periodic(hcd, qh); + } + + done: + SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags) +} + +/** + * Deactivates a QH. For non-periodic QHs, removes the QH from the active + * non-periodic schedule. The QH is added to the inactive non-periodic + * schedule if any QTDs are still attached to the QH. + * + * For periodic QHs, the QH is removed from the periodic queued schedule. If + * there are any QTDs still attached to the QH, the QH is added to either the + * periodic inactive schedule or the periodic ready schedule and its next + * scheduled frame is calculated. The QH is placed in the ready schedule if + * the scheduled frame has been reached already. Otherwise it's placed in the + * inactive schedule. If there are no QTDs attached to the QH, the QH is + * completely removed from the periodic schedule. + */ +void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, int sched_next_periodic_split) +{ + unsigned long flags; + SPIN_LOCK_IRQSAVE(&hcd->lock, flags); + + if (dwc_qh_is_non_per(qh)) { + dwc_otg_hcd_qh_remove(hcd, qh); + if (!list_empty(&qh->qtd_list)) { + /* Add back to inactive non-periodic schedule. */ + dwc_otg_hcd_qh_add(hcd, qh); + } + } else { + uint16_t frame_number = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(hcd)); + + if (qh->do_split) { + /* Schedule the next continuing periodic split transfer */ + if (sched_next_periodic_split) { + + qh->sched_frame = frame_number; + if (dwc_frame_num_le(frame_number, + dwc_frame_num_inc(qh->start_split_frame, 1))) { + /* + * Allow one frame to elapse after start + * split microframe before scheduling + * complete split, but DONT if we are + * doing the next start split in the + * same frame for an ISOC out. + */ + if ((qh->ep_type != USB_ENDPOINT_XFER_ISOC) || (qh->ep_is_in != 0)) { + qh->sched_frame = dwc_frame_num_inc(qh->sched_frame, 1); + } + } + } else { + qh->sched_frame = dwc_frame_num_inc(qh->start_split_frame, + qh->interval); + if (dwc_frame_num_le(qh->sched_frame, frame_number)) { + qh->sched_frame = frame_number; + } + qh->sched_frame |= 0x7; + qh->start_split_frame = qh->sched_frame; + } + } else { + qh->sched_frame = dwc_frame_num_inc(qh->sched_frame, qh->interval); + if (dwc_frame_num_le(qh->sched_frame, frame_number)) { + qh->sched_frame = frame_number; + } + } + + if (list_empty(&qh->qtd_list)) { + dwc_otg_hcd_qh_remove(hcd, qh); + } else { + /* + * Remove from periodic_sched_queued and move to + * appropriate queue. + */ + if (qh->sched_frame == frame_number) { + list_move(&qh->qh_list_entry, + &hcd->periodic_sched_ready); + } else { + list_move(&qh->qh_list_entry, + &hcd->periodic_sched_inactive); + } + } + } + + SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags); +} + +/** + * This function allocates and initializes a QTD. + * + * @param[in] urb The URB to create a QTD from. Each URB-QTD pair will end up + * pointing to each other so each pair should have a unique correlation. + * + * @return Returns pointer to the newly allocated QTD, or NULL on error. */ +dwc_otg_qtd_t *dwc_otg_hcd_qtd_create (struct urb *urb) +{ + dwc_otg_qtd_t *qtd; + + qtd = dwc_otg_hcd_qtd_alloc (); + if (qtd == NULL) { + return NULL; + } + + dwc_otg_hcd_qtd_init (qtd, urb); + return qtd; +} + +/** + * Initializes a QTD structure. + * + * @param[in] qtd The QTD to initialize. + * @param[in] urb The URB to use for initialization. */ +void dwc_otg_hcd_qtd_init (dwc_otg_qtd_t *qtd, struct urb *urb) +{ + memset (qtd, 0, sizeof (dwc_otg_qtd_t)); + qtd->urb = urb; + if (usb_pipecontrol(urb->pipe)) { + /* + * The only time the QTD data toggle is used is on the data + * phase of control transfers. This phase always starts with + * DATA1. + */ + qtd->data_toggle = DWC_OTG_HC_PID_DATA1; + qtd->control_phase = DWC_OTG_CONTROL_SETUP; + } + + /* start split */ + qtd->complete_split = 0; + qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL; + qtd->isoc_split_offset = 0; + + /* Store the qtd ptr in the urb to reference what QTD. */ + urb->hcpriv = qtd; + return; +} + +/** + * This function adds a QTD to the QTD-list of a QH. It will find the correct + * QH to place the QTD into. If it does not find a QH, then it will create a + * new QH. If the QH to which the QTD is added is not currently scheduled, it + * is placed into the proper schedule based on its EP type. + * + * @param[in] qtd The QTD to add + * @param[in] dwc_otg_hcd The DWC HCD structure + * + * @return 0 if successful, negative error code otherwise. + */ +int dwc_otg_hcd_qtd_add (dwc_otg_qtd_t *qtd, + dwc_otg_hcd_t *dwc_otg_hcd) +{ + struct usb_host_endpoint *ep; + dwc_otg_qh_t *qh; + unsigned long flags; + int retval = 0; + + struct urb *urb = qtd->urb; + + SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags); + + /* + * Get the QH which holds the QTD-list to insert to. Create QH if it + * doesn't exist. + */ + ep = dwc_urb_to_endpoint(urb); + qh = (dwc_otg_qh_t *)ep->hcpriv; + if (qh == NULL) { + qh = dwc_otg_hcd_qh_create (dwc_otg_hcd, urb); + if (qh == NULL) { + goto done; + } + ep->hcpriv = qh; + } + + retval = dwc_otg_hcd_qh_add(dwc_otg_hcd, qh); + if (retval == 0) { + list_add_tail(&qtd->qtd_list_entry, &qh->qtd_list); + } + + done: + SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags); + + return retval; +} + +#endif /* DWC_DEVICE_ONLY */ diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_pcd.c b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_pcd.c new file mode 100644 index 0000000000..030a3f2856 --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_pcd.c @@ -0,0 +1,2523 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.c $ + * $Revision: 1.5 $ + * $Date: 2008-11-27 09:21:25 $ + * $Change: 1115682 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ +#ifndef DWC_HOST_ONLY + +/** @file + * This file implements the Peripheral Controller Driver. + * + * The Peripheral Controller Driver (PCD) is responsible for + * translating requests from the Function Driver into the appropriate + * actions on the DWC_otg controller. It isolates the Function Driver + * from the specifics of the controller by providing an API to the + * Function Driver. + * + * The Peripheral Controller Driver for Linux will implement the + * Gadget API, so that the existing Gadget drivers can be used. + * (Gadget Driver is the Linux terminology for a Function Driver.) + * + * The Linux Gadget API is defined in the header file + * <code><linux/usb_gadget.h></code>. The USB EP operations API is + * defined in the structure <code>usb_ep_ops</code> and the USB + * Controller API is defined in the structure + * <code>usb_gadget_ops</code>. + * + * An important function of the PCD is managing interrupts generated + * by the DWC_otg controller. The implementation of the DWC_otg device + * mode interrupt service routines is in dwc_otg_pcd_intr.c. + * + * @todo Add Device Mode test modes (Test J mode, Test K mode, etc). + * @todo Does it work when the request size is greater than DEPTSIZ + * transfer size + * + */ + + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/string.h> +#include <linux/dma-mapping.h> +#include <linux/version.h> + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21) +# include <linux/usb/ch9.h> +#else +# include <linux/usb_ch9.h> +#endif + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) +#include <linux/usb/gadget.h> +#else +#include <linux/usb_gadget.h> +#endif + +#include "dwc_otg_driver.h" +#include "dwc_otg_pcd.h" + + +/** + * Static PCD pointer for use in usb_gadget_register_driver and + * usb_gadget_unregister_driver. Initialized in dwc_otg_pcd_init. + */ +static dwc_otg_pcd_t *s_pcd = 0; + + +/* Display the contents of the buffer */ +extern void dump_msg(const u8 *buf, unsigned int length); + + +/** + * This function completes a request. It call's the request call back. + */ +void dwc_otg_request_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_request_t *req, + int status) +{ + unsigned stopped = ep->stopped; + + DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, ep); + list_del_init(&req->queue); + + if (req->req.status == -EINPROGRESS) { + req->req.status = status; + } else { + status = req->req.status; + } + + /* don't modify queue heads during completion callback */ + ep->stopped = 1; + SPIN_UNLOCK(&ep->pcd->lock); + req->req.complete(&ep->ep, &req->req); + SPIN_LOCK(&ep->pcd->lock); + + if (ep->pcd->request_pending > 0) { + --ep->pcd->request_pending; + } + + ep->stopped = stopped; +} + +/** + * This function terminates all the requsts in the EP request queue. + */ +void dwc_otg_request_nuke(dwc_otg_pcd_ep_t *ep) +{ + dwc_otg_pcd_request_t *req; + + ep->stopped = 1; + + /* called with irqs blocked?? */ + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, dwc_otg_pcd_request_t, + queue); + dwc_otg_request_done(ep, req, -ESHUTDOWN); + } +} + +/* USB Endpoint Operations */ +/* + * The following sections briefly describe the behavior of the Gadget + * API endpoint operations implemented in the DWC_otg driver + * software. Detailed descriptions of the generic behavior of each of + * these functions can be found in the Linux header file + * include/linux/usb_gadget.h. + * + * The Gadget API provides wrapper functions for each of the function + * pointers defined in usb_ep_ops. The Gadget Driver calls the wrapper + * function, which then calls the underlying PCD function. The + * following sections are named according to the wrapper + * functions. Within each section, the corresponding DWC_otg PCD + * function name is specified. + * + */ + +/** + * This function assigns periodic Tx FIFO to an periodic EP + * in shared Tx FIFO mode + */ +static uint32_t assign_perio_tx_fifo(dwc_otg_core_if_t *core_if) +{ + uint32_t PerTxMsk = 1; + int i; + for(i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; ++i) + { + if((PerTxMsk & core_if->p_tx_msk) == 0) { + core_if->p_tx_msk |= PerTxMsk; + return i + 1; + } + PerTxMsk <<= 1; + } + return 0; +} +/** + * This function releases periodic Tx FIFO + * in shared Tx FIFO mode + */ +static void release_perio_tx_fifo(dwc_otg_core_if_t *core_if, uint32_t fifo_num) +{ + core_if->p_tx_msk = (core_if->p_tx_msk & (1 << (fifo_num - 1))) ^ core_if->p_tx_msk; +} +/** + * This function assigns periodic Tx FIFO to an periodic EP + * in shared Tx FIFO mode + */ +static uint32_t assign_tx_fifo(dwc_otg_core_if_t *core_if) +{ + uint32_t TxMsk = 1; + int i; + + for(i = 0; i < core_if->hwcfg4.b.num_in_eps; ++i) + { + if((TxMsk & core_if->tx_msk) == 0) { + core_if->tx_msk |= TxMsk; + return i + 1; + } + TxMsk <<= 1; + } + return 0; +} +/** + * This function releases periodic Tx FIFO + * in shared Tx FIFO mode + */ +static void release_tx_fifo(dwc_otg_core_if_t *core_if, uint32_t fifo_num) +{ + core_if->tx_msk = (core_if->tx_msk & (1 << (fifo_num - 1))) ^ core_if->tx_msk; +} + +/** + * This function is called by the Gadget Driver for each EP to be + * configured for the current configuration (SET_CONFIGURATION). + * + * This function initializes the dwc_otg_ep_t data structure, and then + * calls dwc_otg_ep_activate. + */ +static int dwc_otg_pcd_ep_enable(struct usb_ep *usb_ep, + const struct usb_endpoint_descriptor *ep_desc) +{ + dwc_otg_pcd_ep_t *ep = 0; + dwc_otg_pcd_t *pcd = 0; + unsigned long flags; + + DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, usb_ep, ep_desc); + + ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep); + if (!usb_ep || !ep_desc || ep->desc || + ep_desc->bDescriptorType != USB_DT_ENDPOINT) { + DWC_WARN("%s, bad ep or descriptor\n", __func__); + return -EINVAL; + } + if (ep == &ep->pcd->ep0) { + DWC_WARN("%s, bad ep(0)\n", __func__); + return -EINVAL; + } + + /* Check FIFO size? */ + if (!ep_desc->wMaxPacketSize) { + DWC_WARN("%s, bad %s maxpacket\n", __func__, usb_ep->name); + return -ERANGE; + } + + pcd = ep->pcd; + if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) { + DWC_WARN("%s, bogus device state\n", __func__); + return -ESHUTDOWN; + } + + SPIN_LOCK_IRQSAVE(&pcd->lock, flags); + + ep->desc = ep_desc; + ep->ep.maxpacket = le16_to_cpu (ep_desc->wMaxPacketSize); + + /* + * Activate the EP + */ + ep->stopped = 0; + + ep->dwc_ep.is_in = (USB_DIR_IN & ep_desc->bEndpointAddress) != 0; + ep->dwc_ep.maxpacket = ep->ep.maxpacket; + + ep->dwc_ep.type = ep_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + + if(ep->dwc_ep.is_in) { + if(!pcd->otg_dev->core_if->en_multiple_tx_fifo) { + ep->dwc_ep.tx_fifo_num = 0; + + if (ep->dwc_ep.type == USB_ENDPOINT_XFER_ISOC) { + /* + * if ISOC EP then assign a Periodic Tx FIFO. + */ + ep->dwc_ep.tx_fifo_num = assign_perio_tx_fifo(pcd->otg_dev->core_if); + } + } else { + /* + * if Dedicated FIFOs mode is on then assign a Tx FIFO. + */ + ep->dwc_ep.tx_fifo_num = assign_tx_fifo(pcd->otg_dev->core_if); + + } + } + /* Set initial data PID. */ + if (ep->dwc_ep.type == USB_ENDPOINT_XFER_BULK) { + ep->dwc_ep.data_pid_start = 0; + } + + DWC_DEBUGPL(DBG_PCD, "Activate %s-%s: type=%d, mps=%d desc=%p\n", + ep->ep.name, (ep->dwc_ep.is_in ?"IN":"OUT"), + ep->dwc_ep.type, ep->dwc_ep.maxpacket, ep->desc); + + if(ep->dwc_ep.type != USB_ENDPOINT_XFER_ISOC) { + ep->dwc_ep.desc_addr = dwc_otg_ep_alloc_desc_chain(&ep->dwc_ep.dma_desc_addr, MAX_DMA_DESC_CNT); + } + + dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep); + SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); + + return 0; +} + +/** + * This function is called when an EP is disabled due to disconnect or + * change in configuration. Any pending requests will terminate with a + * status of -ESHUTDOWN. + * + * This function modifies the dwc_otg_ep_t data structure for this EP, + * and then calls dwc_otg_ep_deactivate. + */ +static int dwc_otg_pcd_ep_disable(struct usb_ep *usb_ep) +{ + dwc_otg_pcd_ep_t *ep; + dwc_otg_pcd_t *pcd = 0; + unsigned long flags; + + DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, usb_ep); + ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep); + if (!usb_ep || !ep->desc) { + DWC_DEBUGPL(DBG_PCD, "%s, %s not enabled\n", __func__, + usb_ep ? ep->ep.name : NULL); + return -EINVAL; + } + + SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags); + + dwc_otg_request_nuke(ep); + + dwc_otg_ep_deactivate(GET_CORE_IF(ep->pcd), &ep->dwc_ep); + ep->desc = 0; + ep->stopped = 1; + + if(ep->dwc_ep.is_in) { + dwc_otg_flush_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num); + release_perio_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num); + release_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num); + } + + /* Free DMA Descriptors */ + pcd = ep->pcd; + + SPIN_UNLOCK_IRQRESTORE(&ep->pcd->lock, flags); + + if(ep->dwc_ep.type != USB_ENDPOINT_XFER_ISOC && ep->dwc_ep.desc_addr) { + dwc_otg_ep_free_desc_chain(ep->dwc_ep.desc_addr, ep->dwc_ep.dma_desc_addr, MAX_DMA_DESC_CNT); + } + + DWC_DEBUGPL(DBG_PCD, "%s disabled\n", usb_ep->name); + return 0; +} + + +/** + * This function allocates a request object to use with the specified + * endpoint. + * + * @param ep The endpoint to be used with with the request + * @param gfp_flags the GFP_* flags to use. + */ +static struct usb_request *dwc_otg_pcd_alloc_request(struct usb_ep *ep, +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + int gfp_flags +#else + gfp_t gfp_flags +#endif + ) +{ + dwc_otg_pcd_request_t *req; + + DWC_DEBUGPL(DBG_PCDV,"%s(%p,%d)\n", __func__, ep, gfp_flags); + if (0 == ep) { + DWC_WARN("%s() %s\n", __func__, "Invalid EP!\n"); + return 0; + } + req = kmalloc(sizeof(dwc_otg_pcd_request_t), gfp_flags); + if (0 == req) { + DWC_WARN("%s() %s\n", __func__, + "request allocation failed!\n"); + return 0; + } + memset(req, 0, sizeof(dwc_otg_pcd_request_t)); + req->req.dma = DMA_ADDR_INVALID; + INIT_LIST_HEAD(&req->queue); + return &req->req; +} + +/** + * This function frees a request object. + * + * @param ep The endpoint associated with the request + * @param req The request being freed + */ +static void dwc_otg_pcd_free_request(struct usb_ep *ep, + struct usb_request *req) +{ + dwc_otg_pcd_request_t *request; + DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, ep, req); + + if (0 == ep || 0 == req) { + DWC_WARN("%s() %s\n", __func__, + "Invalid ep or req argument!\n"); + return; + } + + request = container_of(req, dwc_otg_pcd_request_t, req); + kfree(request); +} + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) +/** + * This function allocates an I/O buffer to be used for a transfer + * to/from the specified endpoint. + * + * @param usb_ep The endpoint to be used with with the request + * @param bytes The desired number of bytes for the buffer + * @param dma Pointer to the buffer's DMA address; must be valid + * @param gfp_flags the GFP_* flags to use. + * @return address of a new buffer or null is buffer could not be allocated. + */ +static void *dwc_otg_pcd_alloc_buffer(struct usb_ep *usb_ep, unsigned bytes, + dma_addr_t *dma, +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + int gfp_flags +#else + gfp_t gfp_flags +#endif + ) +{ + void *buf; + dwc_otg_pcd_ep_t *ep; + dwc_otg_pcd_t *pcd = 0; + + ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep); + pcd = ep->pcd; + + DWC_DEBUGPL(DBG_PCDV,"%s(%p,%d,%p,%0x)\n", __func__, usb_ep, bytes, + dma, gfp_flags); + + /* Check dword alignment */ + if ((bytes & 0x3UL) != 0) { + DWC_WARN("%s() Buffer size is not a multiple of" + "DWORD size (%d)",__func__, bytes); + } + + if (GET_CORE_IF(pcd)->dma_enable) { + buf = dma_alloc_coherent (NULL, bytes, dma, gfp_flags); + } + else { + buf = kmalloc(bytes, gfp_flags); + } + + /* Check dword alignment */ + if (((int)buf & 0x3UL) != 0) { + DWC_WARN("%s() Buffer is not DWORD aligned (%p)", + __func__, buf); + } + + return buf; +} + +/** + * This function frees an I/O buffer that was allocated by alloc_buffer. + * + * @param usb_ep the endpoint associated with the buffer + * @param buf address of the buffer + * @param dma The buffer's DMA address + * @param bytes The number of bytes of the buffer + */ +static void dwc_otg_pcd_free_buffer(struct usb_ep *usb_ep, void *buf, + dma_addr_t dma, unsigned bytes) +{ + dwc_otg_pcd_ep_t *ep; + dwc_otg_pcd_t *pcd = 0; + + ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep); + pcd = ep->pcd; + + DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p,%0x,%d)\n", __func__, ep, buf, dma, bytes); + + if (GET_CORE_IF(pcd)->dma_enable) { + dma_free_coherent (NULL, bytes, buf, dma); + } + else { + kfree(buf); + } +} +#endif + + +/** + * This function is used to submit an I/O Request to an EP. + * + * - When the request completes the request's completion callback + * is called to return the request to the driver. + * - An EP, except control EPs, may have multiple requests + * pending. + * - Once submitted the request cannot be examined or modified. + * - Each request is turned into one or more packets. + * - A BULK EP can queue any amount of data; the transfer is + * packetized. + * - Zero length Packets are specified with the request 'zero' + * flag. + */ +static int dwc_otg_pcd_ep_queue(struct usb_ep *usb_ep, + struct usb_request *usb_req, +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + int gfp_flags +#else + gfp_t gfp_flags +#endif + ) +{ + int prevented = 0; + dwc_otg_pcd_request_t *req; + dwc_otg_pcd_ep_t *ep; + dwc_otg_pcd_t *pcd; + unsigned long flags = 0; + dwc_otg_core_if_t *_core_if; + + DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p,%d)\n", + __func__, usb_ep, usb_req, gfp_flags); + + req = container_of(usb_req, dwc_otg_pcd_request_t, req); + if (!usb_req || !usb_req->complete || !usb_req->buf || + !list_empty(&req->queue)) { + DWC_WARN("%s, bad params\n", __func__); + return -EINVAL; + } + + ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep); + if (!usb_ep || (!ep->desc && ep->dwc_ep.num != 0)/* || ep->stopped != 0*/) { + DWC_WARN("%s, bad ep\n", __func__); + return -EINVAL; + } + + pcd = ep->pcd; + if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) { + DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed); + DWC_WARN("%s, bogus device state\n", __func__); + return -ESHUTDOWN; + } + + + DWC_DEBUGPL(DBG_PCD, "%s queue req %p, len %d buf %p\n", + usb_ep->name, usb_req, usb_req->length, usb_req->buf); + + if (!GET_CORE_IF(pcd)->core_params->opt) { + if (ep->dwc_ep.num != 0) { + DWC_ERROR("%s queue req %p, len %d buf %p\n", + usb_ep->name, usb_req, usb_req->length, usb_req->buf); + } + } + + SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags); + + + /************************************************** + New add by kaiker ,for DMA mode bug + ************************************************/ + //by kaiker ,for RT3052 USB OTG device mode + + _core_if = GET_CORE_IF(pcd); + + if (_core_if->dma_enable) + { + usb_req->dma = virt_to_phys((void *)usb_req->buf); + + if(ep->dwc_ep.is_in) + { +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)) || defined(CONFIG_MIPS) + if(usb_req->length) + dma_cache_wback_inv((unsigned long)usb_req->buf, usb_req->length + 2); +#endif + } + } + + + +#if defined(DEBUG) & defined(VERBOSE) + dump_msg(usb_req->buf, usb_req->length); +#endif + + usb_req->status = -EINPROGRESS; + usb_req->actual = 0; + + /* + * For EP0 IN without premature status, zlp is required? + */ + if (ep->dwc_ep.num == 0 && ep->dwc_ep.is_in) { + DWC_DEBUGPL(DBG_PCDV, "%s-OUT ZLP\n", usb_ep->name); + //_req->zero = 1; + } + + /* Start the transfer */ + if (list_empty(&ep->queue) && !ep->stopped) { + /* EP0 Transfer? */ + if (ep->dwc_ep.num == 0) { + switch (pcd->ep0state) { + case EP0_IN_DATA_PHASE: + DWC_DEBUGPL(DBG_PCD, + "%s ep0: EP0_IN_DATA_PHASE\n", + __func__); + break; + + case EP0_OUT_DATA_PHASE: + DWC_DEBUGPL(DBG_PCD, + "%s ep0: EP0_OUT_DATA_PHASE\n", + __func__); + if (pcd->request_config) { + /* Complete STATUS PHASE */ + ep->dwc_ep.is_in = 1; + pcd->ep0state = EP0_IN_STATUS_PHASE; + } + break; + + case EP0_IN_STATUS_PHASE: + DWC_DEBUGPL(DBG_PCD, + "%s ep0: EP0_IN_STATUS_PHASE\n", + __func__); + break; + + default: + DWC_DEBUGPL(DBG_ANY, "ep0: odd state %d\n", + pcd->ep0state); + SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); + return -EL2HLT; + } + ep->dwc_ep.dma_addr = usb_req->dma; + ep->dwc_ep.start_xfer_buff = usb_req->buf; + ep->dwc_ep.xfer_buff = usb_req->buf; + ep->dwc_ep.xfer_len = usb_req->length; + ep->dwc_ep.xfer_count = 0; + ep->dwc_ep.sent_zlp = 0; + ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; + + if(usb_req->zero) { + if((ep->dwc_ep.xfer_len % ep->dwc_ep.maxpacket == 0) + && (ep->dwc_ep.xfer_len != 0)) { + ep->dwc_ep.sent_zlp = 1; + } + + } + + dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep->dwc_ep); + } + else { + + uint32_t max_transfer = GET_CORE_IF(ep->pcd)->core_params->max_transfer_size; + + /* Setup and start the Transfer */ + ep->dwc_ep.dma_addr = usb_req->dma; + ep->dwc_ep.start_xfer_buff = usb_req->buf; + ep->dwc_ep.xfer_buff = usb_req->buf; + ep->dwc_ep.sent_zlp = 0; + ep->dwc_ep.total_len = usb_req->length; + ep->dwc_ep.xfer_len = 0; + ep->dwc_ep.xfer_count = 0; + + if(max_transfer > MAX_TRANSFER_SIZE) { + ep->dwc_ep.maxxfer = max_transfer - (max_transfer % ep->dwc_ep.maxpacket); + } else { + ep->dwc_ep.maxxfer = max_transfer; + } + + if(usb_req->zero) { + if((ep->dwc_ep.total_len % ep->dwc_ep.maxpacket == 0) + && (ep->dwc_ep.total_len != 0)) { + ep->dwc_ep.sent_zlp = 1; + } + + } + dwc_otg_ep_start_transfer(GET_CORE_IF(pcd), &ep->dwc_ep); + } + } + + if ((req != 0) || prevented) { + ++pcd->request_pending; + list_add_tail(&req->queue, &ep->queue); + if (ep->dwc_ep.is_in && ep->stopped && !(GET_CORE_IF(pcd)->dma_enable)) { + /** @todo NGS Create a function for this. */ + diepmsk_data_t diepmsk = { .d32 = 0}; + diepmsk.b.intktxfemp = 1; + if(&GET_CORE_IF(pcd)->multiproc_int_enable) { + dwc_modify_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->diepeachintmsk[ep->dwc_ep.num], + 0, diepmsk.d32); + } else { + dwc_modify_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->diepmsk, 0, diepmsk.d32); + } + } + } + + SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); + return 0; +} + +/** + * This function cancels an I/O request from an EP. + */ +static int dwc_otg_pcd_ep_dequeue(struct usb_ep *usb_ep, + struct usb_request *usb_req) +{ + dwc_otg_pcd_request_t *req; + dwc_otg_pcd_ep_t *ep; + dwc_otg_pcd_t *pcd; + unsigned long flags; + + DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, usb_ep, usb_req); + + ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep); + if (!usb_ep || !usb_req || (!ep->desc && ep->dwc_ep.num != 0)) { + DWC_WARN("%s, bad argument\n", __func__); + return -EINVAL; + } + pcd = ep->pcd; + if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) { + DWC_WARN("%s, bogus device state\n", __func__); + return -ESHUTDOWN; + } + + SPIN_LOCK_IRQSAVE(&pcd->lock, flags); + DWC_DEBUGPL(DBG_PCDV, "%s %s %s %p\n", __func__, usb_ep->name, + ep->dwc_ep.is_in ? "IN" : "OUT", + usb_req); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry(req, &ep->queue, queue) + { + if (&req->req == usb_req) { + break; + } + } + + if (&req->req != usb_req) { + SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); + return -EINVAL; + } + + if (!list_empty(&req->queue)) { + dwc_otg_request_done(ep, req, -ECONNRESET); + } + else { + req = 0; + } + + SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); + + return req ? 0 : -EOPNOTSUPP; +} + +/** + * usb_ep_set_halt stalls an endpoint. + * + * usb_ep_clear_halt clears an endpoint halt and resets its data + * toggle. + * + * Both of these functions are implemented with the same underlying + * function. The behavior depends on the value argument. + * + * @param[in] usb_ep the Endpoint to halt or clear halt. + * @param[in] value + * - 0 means clear_halt. + * - 1 means set_halt, + * - 2 means clear stall lock flag. + * - 3 means set stall lock flag. + */ +static int dwc_otg_pcd_ep_set_halt(struct usb_ep *usb_ep, int value) +{ + int retval = 0; + unsigned long flags; + dwc_otg_pcd_ep_t *ep = 0; + + + DWC_DEBUGPL(DBG_PCD,"HALT %s %d\n", usb_ep->name, value); + + ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep); + + if (!usb_ep || (!ep->desc && ep != &ep->pcd->ep0) || + ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + DWC_WARN("%s, bad ep\n", __func__); + return -EINVAL; + } + + SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags); + if (!list_empty(&ep->queue)) { + DWC_WARN("%s() %s XFer In process\n", __func__, usb_ep->name); + retval = -EAGAIN; + } + else if (value == 0) { + dwc_otg_ep_clear_stall(ep->pcd->otg_dev->core_if, + &ep->dwc_ep); + } + else if(value == 1) { + if (ep->dwc_ep.is_in == 1 && ep->pcd->otg_dev->core_if->dma_desc_enable) { + dtxfsts_data_t txstatus; + fifosize_data_t txfifosize; + + txfifosize.d32 = dwc_read_reg32(&ep->pcd->otg_dev->core_if->core_global_regs->dptxfsiz_dieptxf[ep->dwc_ep.tx_fifo_num]); + txstatus.d32 = dwc_read_reg32(&ep->pcd->otg_dev->core_if->dev_if->in_ep_regs[ep->dwc_ep.num]->dtxfsts); + + if(txstatus.b.txfspcavail < txfifosize.b.depth) { + DWC_WARN("%s() %s Data In Tx Fifo\n", __func__, usb_ep->name); + retval = -EAGAIN; + } + else { + if (ep->dwc_ep.num == 0) { + ep->pcd->ep0state = EP0_STALL; + } + + ep->stopped = 1; + dwc_otg_ep_set_stall(ep->pcd->otg_dev->core_if, + &ep->dwc_ep); + } + } + else { + if (ep->dwc_ep.num == 0) { + ep->pcd->ep0state = EP0_STALL; + } + + ep->stopped = 1; + dwc_otg_ep_set_stall(ep->pcd->otg_dev->core_if, + &ep->dwc_ep); + } + } + else if (value == 2) { + ep->dwc_ep.stall_clear_flag = 0; + } + else if (value == 3) { + ep->dwc_ep.stall_clear_flag = 1; + } + + SPIN_UNLOCK_IRQRESTORE(&ep->pcd->lock, flags); + return retval; +} + +/** + * This function allocates a DMA Descriptor chain for the Endpoint + * buffer to be used for a transfer to/from the specified endpoint. + */ +dwc_otg_dma_desc_t* dwc_otg_ep_alloc_desc_chain(uint32_t * dma_desc_addr, uint32_t count) +{ + + return dma_alloc_coherent(NULL, count * sizeof(dwc_otg_dma_desc_t), dma_desc_addr, GFP_KERNEL); +} + +/** + * This function frees a DMA Descriptor chain that was allocated by ep_alloc_desc. + */ +void dwc_otg_ep_free_desc_chain(dwc_otg_dma_desc_t* desc_addr, uint32_t dma_desc_addr, uint32_t count) +{ + dma_free_coherent(NULL, count * sizeof(dwc_otg_dma_desc_t), desc_addr, dma_desc_addr); +} + +#ifdef DWC_EN_ISOC + +/** + * This function initializes a descriptor chain for Isochronous transfer + * + * @param core_if Programming view of DWC_otg controller. + * @param dwc_ep The EP to start the transfer on. + * + */ +void dwc_otg_iso_ep_start_ddma_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep) +{ + + dsts_data_t dsts = { .d32 = 0}; + depctl_data_t depctl = { .d32 = 0 }; + volatile uint32_t *addr; + int i, j; + + if(dwc_ep->is_in) + dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl / dwc_ep->bInterval; + else + dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval; + + + /** Allocate descriptors for double buffering */ + dwc_ep->iso_desc_addr = dwc_otg_ep_alloc_desc_chain(&dwc_ep->iso_dma_desc_addr,dwc_ep->desc_cnt*2); + if(dwc_ep->desc_addr) { + DWC_WARN("%s, can't allocate DMA descriptor chain\n", __func__); + return; + } + + dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts); + + /** ISO OUT EP */ + if(dwc_ep->is_in == 0) { + desc_sts_data_t sts = { .d32 =0 }; + dwc_otg_dma_desc_t* dma_desc = dwc_ep->iso_desc_addr; + dma_addr_t dma_ad; + uint32_t data_per_desc; + dwc_otg_dev_out_ep_regs_t *out_regs = + core_if->dev_if->out_ep_regs[dwc_ep->num]; + int offset; + + addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl; + dma_ad = (dma_addr_t)dwc_read_reg32(&(out_regs->doepdma)); + + /** Buffer 0 descriptors setup */ + dma_ad = dwc_ep->dma_addr0; + + sts.b_iso_out.bs = BS_HOST_READY; + sts.b_iso_out.rxsts = 0; + sts.b_iso_out.l = 0; + sts.b_iso_out.sp = 0; + sts.b_iso_out.ioc = 0; + sts.b_iso_out.pid = 0; + sts.b_iso_out.framenum = 0; + + offset = 0; + for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm) + { + + for(j = 0; j < dwc_ep->pkt_per_frm; ++j) + { + data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? + dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; + + data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; + sts.b_iso_out.rxbytes = data_per_desc; + writel((uint32_t)dma_ad, &dma_desc->buf); + writel(sts.d32, &dma_desc->status); + + offset += data_per_desc; + dma_desc ++; + (uint32_t)dma_ad += data_per_desc; + } + } + + for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) + { + data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? + dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; + data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; + sts.b_iso_out.rxbytes = data_per_desc; + writel((uint32_t)dma_ad, &dma_desc->buf); + writel(sts.d32, &dma_desc->status); + + offset += data_per_desc; + dma_desc ++; + (uint32_t)dma_ad += data_per_desc; + } + + sts.b_iso_out.ioc = 1; + data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? + dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; + data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; + sts.b_iso_out.rxbytes = data_per_desc; + + writel((uint32_t)dma_ad, &dma_desc->buf); + writel(sts.d32, &dma_desc->status); + dma_desc ++; + + /** Buffer 1 descriptors setup */ + sts.b_iso_out.ioc = 0; + dma_ad = dwc_ep->dma_addr1; + + offset = 0; + for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm) + { + for(j = 0; j < dwc_ep->pkt_per_frm; ++j) + { + data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? + dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; + data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; + sts.b_iso_out.rxbytes = data_per_desc; + writel((uint32_t)dma_ad, &dma_desc->buf); + writel(sts.d32, &dma_desc->status); + + offset += data_per_desc; + dma_desc ++; + (uint32_t)dma_ad += data_per_desc; + } + } + for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) + { + data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? + dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; + data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; + sts.b_iso_out.rxbytes = data_per_desc; + writel((uint32_t)dma_ad, &dma_desc->buf); + writel(sts.d32, &dma_desc->status); + + offset += data_per_desc; + dma_desc ++; + (uint32_t)dma_ad += data_per_desc; + } + + sts.b_iso_out.ioc = 1; + sts.b_iso_out.l = 1; + data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? + dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; + data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; + sts.b_iso_out.rxbytes = data_per_desc; + + writel((uint32_t)dma_ad, &dma_desc->buf); + writel(sts.d32, &dma_desc->status); + + dwc_ep->next_frame = 0; + + /** Write dma_ad into DOEPDMA register */ + dwc_write_reg32(&(out_regs->doepdma),(uint32_t)dwc_ep->iso_dma_desc_addr); + + } + /** ISO IN EP */ + else { + desc_sts_data_t sts = { .d32 =0 }; + dwc_otg_dma_desc_t* dma_desc = dwc_ep->iso_desc_addr; + dma_addr_t dma_ad; + dwc_otg_dev_in_ep_regs_t *in_regs = + core_if->dev_if->in_ep_regs[dwc_ep->num]; + unsigned int frmnumber; + fifosize_data_t txfifosize,rxfifosize; + + txfifosize.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[dwc_ep->num]->dtxfsts); + rxfifosize.d32 = dwc_read_reg32(&core_if->core_global_regs->grxfsiz); + + + addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl; + + dma_ad = dwc_ep->dma_addr0; + + dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts); + + sts.b_iso_in.bs = BS_HOST_READY; + sts.b_iso_in.txsts = 0; + sts.b_iso_in.sp = (dwc_ep->data_per_frame % dwc_ep->maxpacket)? 1 : 0; + sts.b_iso_in.ioc = 0; + sts.b_iso_in.pid = dwc_ep->pkt_per_frm; + + + frmnumber = dwc_ep->next_frame; + + sts.b_iso_in.framenum = frmnumber; + sts.b_iso_in.txbytes = dwc_ep->data_per_frame; + sts.b_iso_in.l = 0; + + /** Buffer 0 descriptors setup */ + for(i = 0; i < dwc_ep->desc_cnt - 1; i++) + { + writel((uint32_t)dma_ad, &dma_desc->buf); + writel(sts.d32, &dma_desc->status); + dma_desc ++; + + (uint32_t)dma_ad += dwc_ep->data_per_frame; + sts.b_iso_in.framenum += dwc_ep->bInterval; + } + + sts.b_iso_in.ioc = 1; + writel((uint32_t)dma_ad, &dma_desc->buf); + writel(sts.d32, &dma_desc->status); + ++dma_desc; + + /** Buffer 1 descriptors setup */ + sts.b_iso_in.ioc = 0; + dma_ad = dwc_ep->dma_addr1; + + for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm) + { + writel((uint32_t)dma_ad, &dma_desc->buf); + writel(sts.d32, &dma_desc->status); + dma_desc ++; + + (uint32_t)dma_ad += dwc_ep->data_per_frame; + sts.b_iso_in.framenum += dwc_ep->bInterval; + + sts.b_iso_in.ioc = 0; + } + sts.b_iso_in.ioc = 1; + sts.b_iso_in.l = 1; + + writel((uint32_t)dma_ad, &dma_desc->buf); + writel(sts.d32, &dma_desc->status); + + dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval; + + /** Write dma_ad into diepdma register */ + dwc_write_reg32(&(in_regs->diepdma),(uint32_t)dwc_ep->iso_dma_desc_addr); + } + /** Enable endpoint, clear nak */ + depctl.d32 = 0; + depctl.b.epena = 1; + depctl.b.usbactep = 1; + depctl.b.cnak = 1; + + dwc_modify_reg32(addr, depctl.d32,depctl.d32); + depctl.d32 = dwc_read_reg32(addr); +} + +/** + * This function initializes a descriptor chain for Isochronous transfer + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to start the transfer on. + * + */ + +void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) +{ + depctl_data_t depctl = { .d32 = 0 }; + volatile uint32_t *addr; + + + if(ep->is_in) { + addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; + } else { + addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; + } + + + if(core_if->dma_enable == 0 || core_if->dma_desc_enable!= 0) { + return; + } else { + deptsiz_data_t deptsiz = { .d32 = 0 }; + + ep->xfer_len = ep->data_per_frame * ep->buf_proc_intrvl / ep->bInterval; + ep->pkt_cnt = (ep->xfer_len - 1 + ep->maxpacket) / + ep->maxpacket; + ep->xfer_count = 0; + ep->xfer_buff = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0; + ep->dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0; + + if(ep->is_in) { + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + deptsiz.b.mc = ep->pkt_per_frm; + deptsiz.b.xfersize = ep->xfer_len; + deptsiz.b.pktcnt = + (ep->xfer_len - 1 + ep->maxpacket) / + ep->maxpacket; + dwc_write_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, deptsiz.d32); + + /* Write the DMA register */ + dwc_write_reg32 (&(core_if->dev_if->in_ep_regs[ep->num]->diepdma), (uint32_t)ep->dma_addr); + + } else { + deptsiz.b.pktcnt = + (ep->xfer_len + (ep->maxpacket - 1)) / + ep->maxpacket; + deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket; + + dwc_write_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz, deptsiz.d32); + + /* Write the DMA register */ + dwc_write_reg32 (&(core_if->dev_if->out_ep_regs[ep->num]->doepdma), (uint32_t)ep->dma_addr); + + } + /** Enable endpoint, clear nak */ + depctl.d32 = 0; + dwc_modify_reg32(addr, depctl.d32,depctl.d32); + + depctl.b.epena = 1; + depctl.b.cnak = 1; + + dwc_modify_reg32(addr, depctl.d32,depctl.d32); + } +} + + +/** + * This function does the setup for a data transfer for an EP and + * starts the transfer. For an IN transfer, the packets will be + * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers, + * the packets are unloaded from the Rx FIFO in the ISR. the ISR. + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to start the transfer on. + */ + +void dwc_otg_iso_ep_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) +{ + if(core_if->dma_enable) { + if(core_if->dma_desc_enable) { + if(ep->is_in) { + ep->desc_cnt = ep->pkt_cnt / ep->pkt_per_frm; + } else { + ep->desc_cnt = ep->pkt_cnt; + } + dwc_otg_iso_ep_start_ddma_transfer(core_if, ep); + } else { + if(core_if->pti_enh_enable) { + dwc_otg_iso_ep_start_buf_transfer(core_if, ep); + } else { + ep->cur_pkt_addr = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0; + ep->cur_pkt_dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0; + dwc_otg_iso_ep_start_frm_transfer(core_if, ep); + } + } + } else { + ep->cur_pkt_addr = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0; + ep->cur_pkt_dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0; + dwc_otg_iso_ep_start_frm_transfer(core_if, ep); + } +} + +/** + * This function does the setup for a data transfer for an EP and + * starts the transfer. For an IN transfer, the packets will be + * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers, + * the packets are unloaded from the Rx FIFO in the ISR. the ISR. + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to start the transfer on. + */ + +void dwc_otg_iso_ep_stop_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) +{ + depctl_data_t depctl = { .d32 = 0 }; + volatile uint32_t *addr; + + if(ep->is_in == 1) { + addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; + } + else { + addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; + } + + /* disable the ep */ + depctl.d32 = dwc_read_reg32(addr); + + depctl.b.epdis = 1; + depctl.b.snak = 1; + + dwc_write_reg32(addr, depctl.d32); + + if(core_if->dma_desc_enable && + ep->iso_desc_addr && ep->iso_dma_desc_addr) { + dwc_otg_ep_free_desc_chain(ep->iso_desc_addr,ep->iso_dma_desc_addr,ep->desc_cnt * 2); + } + + /* reset varibales */ + ep->dma_addr0 = 0; + ep->dma_addr1 = 0; + ep->xfer_buff0 = 0; + ep->xfer_buff1 = 0; + ep->data_per_frame = 0; + ep->data_pattern_frame = 0; + ep->sync_frame = 0; + ep->buf_proc_intrvl = 0; + ep->bInterval = 0; + ep->proc_buf_num = 0; + ep->pkt_per_frm = 0; + ep->pkt_per_frm = 0; + ep->desc_cnt = 0; + ep->iso_desc_addr = 0; + ep->iso_dma_desc_addr = 0; +} + + +/** + * This function is used to submit an ISOC Transfer Request to an EP. + * + * - Every time a sync period completes the request's completion callback + * is called to provide data to the gadget driver. + * - Once submitted the request cannot be modified. + * - Each request is turned into periodic data packets untill ISO + * Transfer is stopped.. + */ +static int dwc_otg_pcd_iso_ep_start(struct usb_ep *usb_ep, struct usb_iso_request *req, +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + int gfp_flags +#else + gfp_t gfp_flags +#endif +) +{ + dwc_otg_pcd_ep_t *ep; + dwc_otg_pcd_t *pcd; + dwc_ep_t *dwc_ep; + unsigned long flags = 0; + int32_t frm_data; + dwc_otg_core_if_t *core_if; + dcfg_data_t dcfg; + dsts_data_t dsts; + + + if (!req || !req->process_buffer || !req->buf0 || !req->buf1) { + DWC_WARN("%s, bad params\n", __func__); + return -EINVAL; + } + + ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep); + + if (!usb_ep || !ep->desc || ep->dwc_ep.num == 0) { + DWC_WARN("%s, bad ep\n", __func__); + return -EINVAL; + } + + pcd = ep->pcd; + core_if = GET_CORE_IF(pcd); + + dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg); + + if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) { + DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed); + DWC_WARN("%s, bogus device state\n", __func__); + return -ESHUTDOWN; + } + + SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags); + + dwc_ep = &ep->dwc_ep; + + if(ep->iso_req) { + DWC_WARN("%s, iso request in progress\n", __func__); + } + req->status = -EINPROGRESS; + + dwc_ep->dma_addr0 = req->dma0; + dwc_ep->dma_addr1 = req->dma1; + + dwc_ep->xfer_buff0 = req->buf0; + dwc_ep->xfer_buff1 = req->buf1; + + ep->iso_req = req; + + dwc_ep->data_per_frame = req->data_per_frame; + + /** @todo - pattern data support is to be implemented in the future */ + dwc_ep->data_pattern_frame = req->data_pattern_frame; + dwc_ep->sync_frame = req->sync_frame; + + dwc_ep->buf_proc_intrvl = req->buf_proc_intrvl; + + dwc_ep->bInterval = 1 << (ep->desc->bInterval - 1); + + dwc_ep->proc_buf_num = 0; + + dwc_ep->pkt_per_frm = 0; + frm_data = ep->dwc_ep.data_per_frame; + while(frm_data > 0) { + dwc_ep->pkt_per_frm++; + frm_data -= ep->dwc_ep.maxpacket; + } + + dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts); + + if(req->flags & USB_REQ_ISO_ASAP) { + dwc_ep->next_frame = dsts.b.soffn + 1; + if(dwc_ep->bInterval != 1){ + dwc_ep->next_frame = dwc_ep->next_frame + (dwc_ep->bInterval - 1 - dwc_ep->next_frame % dwc_ep->bInterval); + } + } else { + dwc_ep->next_frame = req->start_frame; + } + + + if(!core_if->pti_enh_enable) { + dwc_ep->pkt_cnt = dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval; + } else { + dwc_ep->pkt_cnt = + (dwc_ep->data_per_frame * (dwc_ep->buf_proc_intrvl / dwc_ep->bInterval) + - 1 + dwc_ep->maxpacket) / dwc_ep->maxpacket; + } + + if(core_if->dma_desc_enable) { + dwc_ep->desc_cnt = + dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval; + } + + dwc_ep->pkt_info = kmalloc(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt, GFP_KERNEL); + if(!dwc_ep->pkt_info) { + return -ENOMEM; + } + if(core_if->pti_enh_enable) { + memset(dwc_ep->pkt_info, 0, sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt); + } + + dwc_ep->cur_pkt = 0; + + SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); + + dwc_otg_iso_ep_start_transfer(core_if, dwc_ep); + + return 0; +} + +/** + * This function stops ISO EP Periodic Data Transfer. + */ +static int dwc_otg_pcd_iso_ep_stop(struct usb_ep *usb_ep, struct usb_iso_request *req) +{ + dwc_otg_pcd_ep_t *ep; + dwc_otg_pcd_t *pcd; + dwc_ep_t *dwc_ep; + unsigned long flags; + + ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep); + + if (!usb_ep || !ep->desc || ep->dwc_ep.num == 0) { + DWC_WARN("%s, bad ep\n", __func__); + return -EINVAL; + } + + pcd = ep->pcd; + + if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) { + DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed); + DWC_WARN("%s, bogus device state\n", __func__); + return -ESHUTDOWN; + } + + dwc_ep = &ep->dwc_ep; + + dwc_otg_iso_ep_stop_transfer(GET_CORE_IF(pcd), dwc_ep); + + kfree(dwc_ep->pkt_info); + + SPIN_LOCK_IRQSAVE(&pcd->lock, flags); + + if(ep->iso_req != req) { + return -EINVAL; + } + + req->status = -ECONNRESET; + + SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); + + + ep->iso_req = 0; + + return 0; +} + +/** + * This function is used for perodical data exchnage between PCD and gadget drivers. + * for Isochronous EPs + * + * - Every time a sync period completes this function is called to + * perform data exchange between PCD and gadget + */ +void dwc_otg_iso_buffer_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_iso_request_t *req) +{ + int i; + struct usb_gadget_iso_packet_descriptor *iso_packet; + dwc_ep_t *dwc_ep; + + dwc_ep = &ep->dwc_ep; + + if(ep->iso_req->status == -ECONNRESET) { + DWC_PRINT("Device has already disconnected\n"); + /*Device has been disconnected*/ + return; + } + + if(dwc_ep->proc_buf_num != 0) { + iso_packet = ep->iso_req->iso_packet_desc0; + } + + else { + iso_packet = ep->iso_req->iso_packet_desc1; + } + + /* Fill in ISOC packets descriptors & pass to gadget driver*/ + + for(i = 0; i < dwc_ep->pkt_cnt; ++i) { + iso_packet[i].status = dwc_ep->pkt_info[i].status; + iso_packet[i].offset = dwc_ep->pkt_info[i].offset; + iso_packet[i].actual_length = dwc_ep->pkt_info[i].length; + dwc_ep->pkt_info[i].status = 0; + dwc_ep->pkt_info[i].offset = 0; + dwc_ep->pkt_info[i].length = 0; + } + + /* Call callback function to process data buffer */ + ep->iso_req->status = 0;/* success */ + + SPIN_UNLOCK(&ep->pcd->lock); + ep->iso_req->process_buffer(&ep->ep, ep->iso_req); + SPIN_LOCK(&ep->pcd->lock); +} + + +static struct usb_iso_request *dwc_otg_pcd_alloc_iso_request(struct usb_ep *ep,int packets, +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) + int gfp_flags +#else + gfp_t gfp_flags +#endif +) +{ + struct usb_iso_request *pReq = NULL; + uint32_t req_size; + + + req_size = sizeof(struct usb_iso_request); + req_size += (2 * packets * (sizeof(struct usb_gadget_iso_packet_descriptor))); + + + pReq = kmalloc(req_size, gfp_flags); + if (!pReq) { + DWC_WARN("%s, can't allocate Iso Request\n", __func__); + return 0; + } + pReq->iso_packet_desc0 = (void*) (pReq + 1); + + pReq->iso_packet_desc1 = pReq->iso_packet_desc0 + packets; + + return pReq; +} + +static void dwc_otg_pcd_free_iso_request(struct usb_ep *ep, struct usb_iso_request *req) +{ + kfree(req); +} + +static struct usb_isoc_ep_ops dwc_otg_pcd_ep_ops = +{ + .ep_ops = + { + .enable = dwc_otg_pcd_ep_enable, + .disable = dwc_otg_pcd_ep_disable, + + .alloc_request = dwc_otg_pcd_alloc_request, + .free_request = dwc_otg_pcd_free_request, + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) + .alloc_buffer = dwc_otg_pcd_alloc_buffer, + .free_buffer = dwc_otg_pcd_free_buffer, +#endif + + .queue = dwc_otg_pcd_ep_queue, + .dequeue = dwc_otg_pcd_ep_dequeue, + + .set_halt = dwc_otg_pcd_ep_set_halt, + .fifo_status = 0, + .fifo_flush = 0, + }, + .iso_ep_start = dwc_otg_pcd_iso_ep_start, + .iso_ep_stop = dwc_otg_pcd_iso_ep_stop, + .alloc_iso_request = dwc_otg_pcd_alloc_iso_request, + .free_iso_request = dwc_otg_pcd_free_iso_request, +}; + +#else + + +static struct usb_ep_ops dwc_otg_pcd_ep_ops = +{ + .enable = dwc_otg_pcd_ep_enable, + .disable = dwc_otg_pcd_ep_disable, + + .alloc_request = dwc_otg_pcd_alloc_request, + .free_request = dwc_otg_pcd_free_request, + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) + .alloc_buffer = dwc_otg_pcd_alloc_buffer, + .free_buffer = dwc_otg_pcd_free_buffer, +#endif + + .queue = dwc_otg_pcd_ep_queue, + .dequeue = dwc_otg_pcd_ep_dequeue, + + .set_halt = dwc_otg_pcd_ep_set_halt, + .fifo_status = 0, + .fifo_flush = 0, + + +}; + +#endif /* DWC_EN_ISOC */ +/* Gadget Operations */ +/** + * The following gadget operations will be implemented in the DWC_otg + * PCD. Functions in the API that are not described below are not + * implemented. + * + * The Gadget API provides wrapper functions for each of the function + * pointers defined in usb_gadget_ops. The Gadget Driver calls the + * wrapper function, which then calls the underlying PCD function. The + * following sections are named according to the wrapper functions + * (except for ioctl, which doesn't have a wrapper function). Within + * each section, the corresponding DWC_otg PCD function name is + * specified. + * + */ + +/** + *Gets the USB Frame number of the last SOF. + */ +static int dwc_otg_pcd_get_frame(struct usb_gadget *gadget) +{ + dwc_otg_pcd_t *pcd; + + DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, gadget); + + if (gadget == 0) { + return -ENODEV; + } + else { + pcd = container_of(gadget, dwc_otg_pcd_t, gadget); + dwc_otg_get_frame_number(GET_CORE_IF(pcd)); + } + + return 0; +} + +void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t *pcd) +{ + uint32_t *addr = (uint32_t *)&(GET_CORE_IF(pcd)->core_global_regs->gotgctl); + gotgctl_data_t mem; + gotgctl_data_t val; + + val.d32 = dwc_read_reg32(addr); + if (val.b.sesreq) { + DWC_ERROR("Session Request Already active!\n"); + return; + } + + DWC_NOTICE("Session Request Initated\n"); + mem.d32 = dwc_read_reg32(addr); + mem.b.sesreq = 1; + dwc_write_reg32(addr, mem.d32); + + /* Start the SRP timer */ + dwc_otg_pcd_start_srp_timer(pcd); + return; +} + +void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t *pcd, int set) +{ + dctl_data_t dctl = {.d32=0}; + volatile uint32_t *addr = &(GET_CORE_IF(pcd)->dev_if->dev_global_regs->dctl); + + if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) { + if (pcd->remote_wakeup_enable) { + if (set) { + dctl.b.rmtwkupsig = 1; + dwc_modify_reg32(addr, 0, dctl.d32); + DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n"); + mdelay(1); + dwc_modify_reg32(addr, dctl.d32, 0); + DWC_DEBUGPL(DBG_PCD, "Clear Remote Wakeup\n"); + } + else { + } + } + else { + DWC_DEBUGPL(DBG_PCD, "Remote Wakeup is disabled\n"); + } + } + return; +} + +/** + * Initiates Session Request Protocol (SRP) to wakeup the host if no + * session is in progress. If a session is already in progress, but + * the device is suspended, remote wakeup signaling is started. + * + */ +static int dwc_otg_pcd_wakeup(struct usb_gadget *gadget) +{ + unsigned long flags; + dwc_otg_pcd_t *pcd; + dsts_data_t dsts; + gotgctl_data_t gotgctl; + + DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, gadget); + + if (gadget == 0) { + return -ENODEV; + } + else { + pcd = container_of(gadget, dwc_otg_pcd_t, gadget); + } + SPIN_LOCK_IRQSAVE(&pcd->lock, flags); + + /* + * This function starts the Protocol if no session is in progress. If + * a session is already in progress, but the device is suspended, + * remote wakeup signaling is started. + */ + + /* Check if valid session */ + gotgctl.d32 = dwc_read_reg32(&(GET_CORE_IF(pcd)->core_global_regs->gotgctl)); + if (gotgctl.b.bsesvld) { + /* Check if suspend state */ + dsts.d32 = dwc_read_reg32(&(GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts)); + if (dsts.b.suspsts) { + dwc_otg_pcd_remote_wakeup(pcd, 1); + } + } + else { + dwc_otg_pcd_initiate_srp(pcd); + } + + SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); + return 0; +} + +static const struct usb_gadget_ops dwc_otg_pcd_ops = +{ + .get_frame = dwc_otg_pcd_get_frame, + .wakeup = dwc_otg_pcd_wakeup, + // current versions must always be self-powered +}; + +/** + * This function updates the otg values in the gadget structure. + */ +void dwc_otg_pcd_update_otg(dwc_otg_pcd_t *pcd, const unsigned reset) +{ + + if (!pcd->gadget.is_otg) + return; + + if (reset) { + pcd->b_hnp_enable = 0; + pcd->a_hnp_support = 0; + pcd->a_alt_hnp_support = 0; + } + + pcd->gadget.b_hnp_enable = pcd->b_hnp_enable; + pcd->gadget.a_hnp_support = pcd->a_hnp_support; + pcd->gadget.a_alt_hnp_support = pcd->a_alt_hnp_support; +} + +/** + * This function is the top level PCD interrupt handler. + */ +static irqreturn_t dwc_otg_pcd_irq(int irq, void *dev +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) + , struct pt_regs *r +#endif + ) +{ + dwc_otg_pcd_t *pcd = dev; + int32_t retval = IRQ_NONE; + + retval = dwc_otg_pcd_handle_intr(pcd); + return IRQ_RETVAL(retval); +} + +/** + * PCD Callback function for initializing the PCD when switching to + * device mode. + * + * @param p void pointer to the <code>dwc_otg_pcd_t</code> + */ +static int32_t dwc_otg_pcd_start_cb(void *p) +{ + dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p; + + /* + * Initialized the Core for Device mode. + */ + if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) { + dwc_otg_core_dev_init(GET_CORE_IF(pcd)); + } + return 1; +} + +/** + * PCD Callback function for stopping the PCD when switching to Host + * mode. + * + * @param p void pointer to the <code>dwc_otg_pcd_t</code> + */ +static int32_t dwc_otg_pcd_stop_cb(void *p) +{ + dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p; + extern void dwc_otg_pcd_stop(dwc_otg_pcd_t *_pcd); + + dwc_otg_pcd_stop(pcd); + return 1; +} + + +/** + * PCD Callback function for notifying the PCD when resuming from + * suspend. + * + * @param p void pointer to the <code>dwc_otg_pcd_t</code> + */ +static int32_t dwc_otg_pcd_suspend_cb(void *p) +{ + dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p; + + if (pcd->driver && pcd->driver->resume) { + SPIN_UNLOCK(&pcd->lock); + pcd->driver->suspend(&pcd->gadget); + SPIN_LOCK(&pcd->lock); + } + + return 1; +} + + +/** + * PCD Callback function for notifying the PCD when resuming from + * suspend. + * + * @param p void pointer to the <code>dwc_otg_pcd_t</code> + */ +static int32_t dwc_otg_pcd_resume_cb(void *p) +{ + dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p; + + if (pcd->driver && pcd->driver->resume) { + SPIN_UNLOCK(&pcd->lock); + pcd->driver->resume(&pcd->gadget); + SPIN_LOCK(&pcd->lock); + } + + /* Stop the SRP timeout timer. */ + if ((GET_CORE_IF(pcd)->core_params->phy_type != DWC_PHY_TYPE_PARAM_FS) || + (!GET_CORE_IF(pcd)->core_params->i2c_enable)) { + if (GET_CORE_IF(pcd)->srp_timer_started) { + GET_CORE_IF(pcd)->srp_timer_started = 0; + del_timer(&pcd->srp_timer); + } + } + return 1; +} + + +/** + * PCD Callback structure for handling mode switching. + */ +static dwc_otg_cil_callbacks_t pcd_callbacks = +{ + .start = dwc_otg_pcd_start_cb, + .stop = dwc_otg_pcd_stop_cb, + .suspend = dwc_otg_pcd_suspend_cb, + .resume_wakeup = dwc_otg_pcd_resume_cb, + .p = 0, /* Set at registration */ +}; + +/** + * This function is called when the SRP timer expires. The SRP should + * complete within 6 seconds. + */ +static void srp_timeout(unsigned long ptr) +{ + gotgctl_data_t gotgctl; + dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *)ptr; + volatile uint32_t *addr = &core_if->core_global_regs->gotgctl; + + gotgctl.d32 = dwc_read_reg32(addr); + + core_if->srp_timer_started = 0; + + if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) && + (core_if->core_params->i2c_enable)) { + DWC_PRINT("SRP Timeout\n"); + + if ((core_if->srp_success) && + (gotgctl.b.bsesvld)) { + if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { + core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); + } + + /* Clear Session Request */ + gotgctl.d32 = 0; + gotgctl.b.sesreq = 1; + dwc_modify_reg32(&core_if->core_global_regs->gotgctl, + gotgctl.d32, 0); + + core_if->srp_success = 0; + } + else { + DWC_ERROR("Device not connected/responding\n"); + gotgctl.b.sesreq = 0; + dwc_write_reg32(addr, gotgctl.d32); + } + } + else if (gotgctl.b.sesreq) { + DWC_PRINT("SRP Timeout\n"); + + DWC_ERROR("Device not connected/responding\n"); + gotgctl.b.sesreq = 0; + dwc_write_reg32(addr, gotgctl.d32); + } + else { + DWC_PRINT(" SRP GOTGCTL=%0x\n", gotgctl.d32); + } +} + +/** + * Start the SRP timer to detect when the SRP does not complete within + * 6 seconds. + * + * @param pcd the pcd structure. + */ +void dwc_otg_pcd_start_srp_timer(dwc_otg_pcd_t *pcd) +{ + struct timer_list *srp_timer = &pcd->srp_timer; + GET_CORE_IF(pcd)->srp_timer_started = 1; + init_timer(srp_timer); + srp_timer->function = srp_timeout; + srp_timer->data = (unsigned long)GET_CORE_IF(pcd); + srp_timer->expires = jiffies + (HZ*6); + add_timer(srp_timer); +} + +/** + * Tasklet + * + */ +extern void start_next_request(dwc_otg_pcd_ep_t *ep); + +static void start_xfer_tasklet_func (unsigned long data) +{ + dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t*)data; + dwc_otg_core_if_t *core_if = pcd->otg_dev->core_if; + + int i; + depctl_data_t diepctl; + + DWC_DEBUGPL(DBG_PCDV, "Start xfer tasklet\n"); + + diepctl.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[0]->diepctl); + + if (pcd->ep0.queue_sof) { + pcd->ep0.queue_sof = 0; + start_next_request (&pcd->ep0); + // break; + } + + for (i=0; i<core_if->dev_if->num_in_eps; i++) + { + depctl_data_t diepctl; + diepctl.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[i]->diepctl); + + if (pcd->in_ep[i].queue_sof) { + pcd->in_ep[i].queue_sof = 0; + start_next_request (&pcd->in_ep[i]); + // break; + } + } + + return; +} + + + + + + + +static struct tasklet_struct start_xfer_tasklet = { + .next = NULL, + .state = 0, + .count = ATOMIC_INIT(0), + .func = start_xfer_tasklet_func, + .data = 0, +}; +/** + * This function initialized the pcd Dp structures to there default + * state. + * + * @param pcd the pcd structure. + */ +void dwc_otg_pcd_reinit(dwc_otg_pcd_t *pcd) +{ + static const char * names[] = + { + + "ep0", + "ep1in", + "ep2in", + "ep3in", + "ep4in", + "ep5in", + "ep6in", + "ep7in", + "ep8in", + "ep9in", + "ep10in", + "ep11in", + "ep12in", + "ep13in", + "ep14in", + "ep15in", + "ep1out", + "ep2out", + "ep3out", + "ep4out", + "ep5out", + "ep6out", + "ep7out", + "ep8out", + "ep9out", + "ep10out", + "ep11out", + "ep12out", + "ep13out", + "ep14out", + "ep15out" + + }; + + int i; + int in_ep_cntr, out_ep_cntr; + uint32_t hwcfg1; + uint32_t num_in_eps = (GET_CORE_IF(pcd))->dev_if->num_in_eps; + uint32_t num_out_eps = (GET_CORE_IF(pcd))->dev_if->num_out_eps; + dwc_otg_pcd_ep_t *ep; + + DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd); + + INIT_LIST_HEAD (&pcd->gadget.ep_list); + pcd->gadget.ep0 = &pcd->ep0.ep; + pcd->gadget.speed = USB_SPEED_UNKNOWN; + + INIT_LIST_HEAD (&pcd->gadget.ep0->ep_list); + + /** + * Initialize the EP0 structure. + */ + ep = &pcd->ep0; + + /* Init EP structure */ + ep->desc = 0; + ep->pcd = pcd; + ep->stopped = 1; + + /* Init DWC ep structure */ + ep->dwc_ep.num = 0; + ep->dwc_ep.active = 0; + ep->dwc_ep.tx_fifo_num = 0; + /* Control until ep is actvated */ + ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; + ep->dwc_ep.maxpacket = MAX_PACKET_SIZE; + ep->dwc_ep.dma_addr = 0; + ep->dwc_ep.start_xfer_buff = 0; + ep->dwc_ep.xfer_buff = 0; + ep->dwc_ep.xfer_len = 0; + ep->dwc_ep.xfer_count = 0; + ep->dwc_ep.sent_zlp = 0; + ep->dwc_ep.total_len = 0; + ep->queue_sof = 0; + ep->dwc_ep.desc_addr = 0; + ep->dwc_ep.dma_desc_addr = 0; + + + /* Init the usb_ep structure. */ + ep->ep.name = names[0]; + ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops; + + /** + * @todo NGS: What should the max packet size be set to + * here? Before EP type is set? + */ + ep->ep.maxpacket = MAX_PACKET_SIZE; + + list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list); + + INIT_LIST_HEAD (&ep->queue); + /** + * Initialize the EP structures. + */ + in_ep_cntr = 0; + hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 3; + + for (i = 1; in_ep_cntr < num_in_eps; i++) + { + if((hwcfg1 & 0x1) == 0) { + dwc_otg_pcd_ep_t *ep = &pcd->in_ep[in_ep_cntr]; + in_ep_cntr ++; + + /* Init EP structure */ + ep->desc = 0; + ep->pcd = pcd; + ep->stopped = 1; + + /* Init DWC ep structure */ + ep->dwc_ep.is_in = 1; + ep->dwc_ep.num = i; + ep->dwc_ep.active = 0; + ep->dwc_ep.tx_fifo_num = 0; + + /* Control until ep is actvated */ + ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; + ep->dwc_ep.maxpacket = MAX_PACKET_SIZE; + ep->dwc_ep.dma_addr = 0; + ep->dwc_ep.start_xfer_buff = 0; + ep->dwc_ep.xfer_buff = 0; + ep->dwc_ep.xfer_len = 0; + ep->dwc_ep.xfer_count = 0; + ep->dwc_ep.sent_zlp = 0; + ep->dwc_ep.total_len = 0; + ep->queue_sof = 0; + ep->dwc_ep.desc_addr = 0; + ep->dwc_ep.dma_desc_addr = 0; + + /* Init the usb_ep structure. */ + ep->ep.name = names[i]; + ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops; + + /** + * @todo NGS: What should the max packet size be set to + * here? Before EP type is set? + */ + ep->ep.maxpacket = MAX_PACKET_SIZE; + + list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list); + + INIT_LIST_HEAD (&ep->queue); + } + hwcfg1 >>= 2; + } + + out_ep_cntr = 0; + hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 2; + + for (i = 1; out_ep_cntr < num_out_eps; i++) + { + if((hwcfg1 & 0x1) == 0) { + dwc_otg_pcd_ep_t *ep = &pcd->out_ep[out_ep_cntr]; + out_ep_cntr++; + + /* Init EP structure */ + ep->desc = 0; + ep->pcd = pcd; + ep->stopped = 1; + + /* Init DWC ep structure */ + ep->dwc_ep.is_in = 0; + ep->dwc_ep.num = i; + ep->dwc_ep.active = 0; + ep->dwc_ep.tx_fifo_num = 0; + /* Control until ep is actvated */ + ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; + ep->dwc_ep.maxpacket = MAX_PACKET_SIZE; + ep->dwc_ep.dma_addr = 0; + ep->dwc_ep.start_xfer_buff = 0; + ep->dwc_ep.xfer_buff = 0; + ep->dwc_ep.xfer_len = 0; + ep->dwc_ep.xfer_count = 0; + ep->dwc_ep.sent_zlp = 0; + ep->dwc_ep.total_len = 0; + ep->queue_sof = 0; + + /* Init the usb_ep structure. */ + ep->ep.name = names[15 + i]; + ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops; + /** + * @todo NGS: What should the max packet size be set to + * here? Before EP type is set? + */ + ep->ep.maxpacket = MAX_PACKET_SIZE; + + list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list); + + INIT_LIST_HEAD (&ep->queue); + } + hwcfg1 >>= 2; + } + + /* remove ep0 from the list. There is a ep0 pointer.*/ + list_del_init (&pcd->ep0.ep.ep_list); + + pcd->ep0state = EP0_DISCONNECT; + pcd->ep0.ep.maxpacket = MAX_EP0_SIZE; + pcd->ep0.dwc_ep.maxpacket = MAX_EP0_SIZE; + pcd->ep0.dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; +} + +/** + * This function releases the Gadget device. + * required by device_unregister(). + * + * @todo Should this do something? Should it free the PCD? + */ +static void dwc_otg_pcd_gadget_release(struct device *dev) +{ + DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, dev); +} + + + +/** + * This function initialized the PCD portion of the driver. + * + */ + +int dwc_otg_pcd_init(struct device *dev) +{ + static char pcd_name[] = "dwc_otg_pcd"; + dwc_otg_pcd_t *pcd; + dwc_otg_core_if_t* core_if; + dwc_otg_dev_if_t* dev_if; + dwc_otg_device_t *otg_dev = dev_get_drvdata(dev); + int retval = 0; + + + DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n",__func__, dev); + /* + * Allocate PCD structure + */ + pcd = kmalloc(sizeof(dwc_otg_pcd_t), GFP_KERNEL); + + if (pcd == 0) { + return -ENOMEM; + } + + memset(pcd, 0, sizeof(dwc_otg_pcd_t)); + spin_lock_init(&pcd->lock); + + otg_dev->pcd = pcd; + s_pcd = pcd; + pcd->gadget.name = pcd_name; +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) + strcpy(pcd->gadget.dev.bus_id, "gadget"); +#else + dev_set_name(&pcd->gadget.dev, "%s", "gadget"); +#endif + + pcd->otg_dev = dev_get_drvdata(dev); + + pcd->gadget.dev.parent = dev; + pcd->gadget.dev.release = dwc_otg_pcd_gadget_release; + pcd->gadget.ops = &dwc_otg_pcd_ops; + + core_if = GET_CORE_IF(pcd); + dev_if = core_if->dev_if; + + if(core_if->hwcfg4.b.ded_fifo_en) { + DWC_PRINT("Dedicated Tx FIFOs mode\n"); + } + else { + DWC_PRINT("Shared Tx FIFO mode\n"); + } + + /* If the module is set to FS or if the PHY_TYPE is FS then the gadget + * should not report as dual-speed capable. replace the following line + * with the block of code below it once the software is debugged for + * this. If is_dualspeed = 0 then the gadget driver should not report + * a device qualifier descriptor when queried. */ + if ((GET_CORE_IF(pcd)->core_params->speed == DWC_SPEED_PARAM_FULL) || + ((GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == 2) && + (GET_CORE_IF(pcd)->hwcfg2.b.fs_phy_type == 1) && + (GET_CORE_IF(pcd)->core_params->ulpi_fs_ls))) { + pcd->gadget.is_dualspeed = 0; + } + else { + pcd->gadget.is_dualspeed = 1; + } + + if ((otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE) || + (otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST) || + (otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) || + (otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) { + pcd->gadget.is_otg = 0; + } + else { + pcd->gadget.is_otg = 1; + } + + + pcd->driver = 0; + /* Register the gadget device */ + retval = device_register(&pcd->gadget.dev); + if (retval != 0) { + kfree (pcd); + return retval; + } + + + /* + * Initialized the Core for Device mode. + */ + if (dwc_otg_is_device_mode(core_if)) { + dwc_otg_core_dev_init(core_if); + } + + /* + * Initialize EP structures + */ + dwc_otg_pcd_reinit(pcd); + + /* + * Register the PCD Callbacks. + */ + dwc_otg_cil_register_pcd_callbacks(otg_dev->core_if, &pcd_callbacks, + pcd); + /* + * Setup interupt handler + */ + DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n", otg_dev->irq); + retval = request_irq(otg_dev->irq, dwc_otg_pcd_irq, + IRQF_SHARED, pcd->gadget.name, pcd); + if (retval != 0) { + DWC_ERROR("request of irq%d failed\n", otg_dev->irq); + device_unregister(&pcd->gadget.dev); + kfree (pcd); + return -EBUSY; + } + + /* + * Initialize the DMA buffer for SETUP packets + */ + if (GET_CORE_IF(pcd)->dma_enable) { + pcd->setup_pkt = dma_alloc_coherent (NULL, sizeof (*pcd->setup_pkt) * 5, &pcd->setup_pkt_dma_handle, 0); + if (pcd->setup_pkt == 0) { + free_irq(otg_dev->irq, pcd); + device_unregister(&pcd->gadget.dev); + kfree (pcd); + return -ENOMEM; + } + + pcd->status_buf = dma_alloc_coherent (NULL, sizeof (uint16_t), &pcd->status_buf_dma_handle, 0); + if (pcd->status_buf == 0) { + dma_free_coherent(NULL, sizeof(*pcd->setup_pkt), pcd->setup_pkt, pcd->setup_pkt_dma_handle); + free_irq(otg_dev->irq, pcd); + device_unregister(&pcd->gadget.dev); + kfree (pcd); + return -ENOMEM; + } + + if (GET_CORE_IF(pcd)->dma_desc_enable) { + dev_if->setup_desc_addr[0] = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_setup_desc_addr[0], 1); + dev_if->setup_desc_addr[1] = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_setup_desc_addr[1], 1); + dev_if->in_desc_addr = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_in_desc_addr, 1); + dev_if->out_desc_addr = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_out_desc_addr, 1); + + if(dev_if->setup_desc_addr[0] == 0 + || dev_if->setup_desc_addr[1] == 0 + || dev_if->in_desc_addr == 0 + || dev_if->out_desc_addr == 0 ) { + + if(dev_if->out_desc_addr) + dwc_otg_ep_free_desc_chain(dev_if->out_desc_addr, dev_if->dma_out_desc_addr, 1); + if(dev_if->in_desc_addr) + dwc_otg_ep_free_desc_chain(dev_if->in_desc_addr, dev_if->dma_in_desc_addr, 1); + if(dev_if->setup_desc_addr[1]) + dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[1], dev_if->dma_setup_desc_addr[1], 1); + if(dev_if->setup_desc_addr[0]) + dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[0], dev_if->dma_setup_desc_addr[0], 1); + + + dma_free_coherent(NULL, sizeof(*pcd->status_buf), pcd->status_buf, pcd->setup_pkt_dma_handle); + dma_free_coherent(NULL, sizeof(*pcd->setup_pkt), pcd->setup_pkt, pcd->setup_pkt_dma_handle); + + free_irq(otg_dev->irq, pcd); + device_unregister(&pcd->gadget.dev); + kfree (pcd); + + return -ENOMEM; + } + } + } + else { + pcd->setup_pkt = kmalloc (sizeof (*pcd->setup_pkt) * 5, GFP_KERNEL); + if (pcd->setup_pkt == 0) { + free_irq(otg_dev->irq, pcd); + device_unregister(&pcd->gadget.dev); + kfree (pcd); + return -ENOMEM; + } + + pcd->status_buf = kmalloc (sizeof (uint16_t), GFP_KERNEL); + if (pcd->status_buf == 0) { + kfree(pcd->setup_pkt); + free_irq(otg_dev->irq, pcd); + device_unregister(&pcd->gadget.dev); + kfree (pcd); + return -ENOMEM; + } + } + + + /* Initialize tasklet */ + start_xfer_tasklet.data = (unsigned long)pcd; + pcd->start_xfer_tasklet = &start_xfer_tasklet; + + return 0; +} + +/** + * Cleanup the PCD. + */ +void dwc_otg_pcd_remove(struct device *dev) +{ + dwc_otg_device_t *otg_dev = dev_get_drvdata(dev); + dwc_otg_pcd_t *pcd = otg_dev->pcd; + dwc_otg_dev_if_t* dev_if = GET_CORE_IF(pcd)->dev_if; + + DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, dev); + + /* + * Free the IRQ + */ + free_irq(otg_dev->irq, pcd); + + /* start with the driver above us */ + if (pcd->driver) { + /* should have been done already by driver model core */ + DWC_WARN("driver '%s' is still registered\n", + pcd->driver->driver.name); + usb_gadget_unregister_driver(pcd->driver); + } + device_unregister(&pcd->gadget.dev); + + if (GET_CORE_IF(pcd)->dma_enable) { + dma_free_coherent (NULL, sizeof (*pcd->setup_pkt) * 5, pcd->setup_pkt, pcd->setup_pkt_dma_handle); + dma_free_coherent (NULL, sizeof (uint16_t), pcd->status_buf, pcd->status_buf_dma_handle); + if (GET_CORE_IF(pcd)->dma_desc_enable) { + dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[0], dev_if->dma_setup_desc_addr[0], 1); + dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[1], dev_if->dma_setup_desc_addr[1], 1); + dwc_otg_ep_free_desc_chain(dev_if->in_desc_addr, dev_if->dma_in_desc_addr, 1); + dwc_otg_ep_free_desc_chain(dev_if->out_desc_addr, dev_if->dma_out_desc_addr, 1); + } + } + else { + kfree (pcd->setup_pkt); + kfree (pcd->status_buf); + } + + kfree(pcd); + otg_dev->pcd = 0; +} + +/** + * This function registers a gadget driver with the PCD. + * + * When a driver is successfully registered, it will receive control + * requests including set_configuration(), which enables non-control + * requests. then usb traffic follows until a disconnect is reported. + * then a host may connect again, or the driver might get unbound. + * + * @param driver The driver being registered + */ +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37) +int usb_gadget_probe_driver(struct usb_gadget_driver *driver, int (*bind)(struct usb_gadget *)) +#else +int usb_gadget_register_driver(struct usb_gadget_driver *driver) +#endif +{ + int retval; + int (*d_bind)(struct usb_gadget *); +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37) + d_bind = bind; +#else + d_bind = driver->bind; +#endif + + DWC_DEBUGPL(DBG_PCD, "registering gadget driver '%s'\n", driver->driver.name); + + if (!driver || driver->speed == USB_SPEED_UNKNOWN || + !d_bind || + !driver->unbind || + !driver->disconnect || + !driver->setup) { + DWC_DEBUGPL(DBG_PCDV,"EINVAL\n"); + return -EINVAL; + } + if (s_pcd == 0) { + DWC_DEBUGPL(DBG_PCDV,"ENODEV\n"); + return -ENODEV; + } + if (s_pcd->driver != 0) { + DWC_DEBUGPL(DBG_PCDV,"EBUSY (%p)\n", s_pcd->driver); + return -EBUSY; + } + + /* hook up the driver */ + s_pcd->driver = driver; + s_pcd->gadget.dev.driver = &driver->driver; + + DWC_DEBUGPL(DBG_PCD, "bind to driver %s\n", driver->driver.name); + retval = d_bind(&s_pcd->gadget); + if (retval) { + DWC_ERROR("bind to driver %s --> error %d\n", + driver->driver.name, retval); + s_pcd->driver = 0; + s_pcd->gadget.dev.driver = 0; + return retval; + } + DWC_DEBUGPL(DBG_ANY, "registered gadget driver '%s'\n", + driver->driver.name); + return 0; +} + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37) +EXPORT_SYMBOL(usb_gadget_probe_driver); +#else +EXPORT_SYMBOL(usb_gadget_register_driver); +#endif + +/** + * This function unregisters a gadget driver + * + * @param driver The driver being unregistered + */ +int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) +{ + //DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, _driver); + + if (s_pcd == 0) { + DWC_DEBUGPL(DBG_ANY, "%s Return(%d): s_pcd==0\n", __func__, + -ENODEV); + return -ENODEV; + } + if (driver == 0 || driver != s_pcd->driver) { + DWC_DEBUGPL(DBG_ANY, "%s Return(%d): driver?\n", __func__, + -EINVAL); + return -EINVAL; + } + + driver->unbind(&s_pcd->gadget); + s_pcd->driver = 0; + + DWC_DEBUGPL(DBG_ANY, "unregistered driver '%s'\n", + driver->driver.name); + return 0; +} +EXPORT_SYMBOL(usb_gadget_unregister_driver); + +#endif /* DWC_HOST_ONLY */ diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_pcd.h b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_pcd.h new file mode 100644 index 0000000000..48de957840 --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_pcd.h @@ -0,0 +1,248 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.h $ + * $Revision: 1.2 $ + * $Date: 2008-11-21 05:39:15 $ + * $Change: 1103515 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ +#ifndef DWC_HOST_ONLY +#if !defined(__DWC_PCD_H__) +#define __DWC_PCD_H__ + +#include <linux/types.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/device.h> + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21) +# include <linux/usb/ch9.h> +#else +# include <linux/usb_ch9.h> +#endif + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) +#include <linux/usb/gadget.h> +#else +#include <linux/usb_gadget.h> +#endif +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> + +struct dwc_otg_device; + +#include "dwc_otg_cil.h" + +/** + * @file + * + * This file contains the structures, constants, and interfaces for + * the Perpherial Contoller Driver (PCD). + * + * The Peripheral Controller Driver (PCD) for Linux will implement the + * Gadget API, so that the existing Gadget drivers can be used. For + * the Mass Storage Function driver the File-backed USB Storage Gadget + * (FBS) driver will be used. The FBS driver supports the + * Control-Bulk (CB), Control-Bulk-Interrupt (CBI), and Bulk-Only + * transports. + * + */ + +/** Invalid DMA Address */ +#define DMA_ADDR_INVALID (~(dma_addr_t)0) +/** Maxpacket size for EP0 */ +#define MAX_EP0_SIZE 64 +/** Maxpacket size for any EP */ +#define MAX_PACKET_SIZE 1024 + +/** Max Transfer size for any EP */ +#define MAX_TRANSFER_SIZE 65535 + +/** Max DMA Descriptor count for any EP */ +#define MAX_DMA_DESC_CNT 64 + +/** + * Get the pointer to the core_if from the pcd pointer. + */ +#define GET_CORE_IF( _pcd ) (_pcd->otg_dev->core_if) + +/** + * States of EP0. + */ +typedef enum ep0_state +{ + EP0_DISCONNECT, /* no host */ + EP0_IDLE, + EP0_IN_DATA_PHASE, + EP0_OUT_DATA_PHASE, + EP0_IN_STATUS_PHASE, + EP0_OUT_STATUS_PHASE, + EP0_STALL, +} ep0state_e; + +/** Fordward declaration.*/ +struct dwc_otg_pcd; + +/** DWC_otg iso request structure. + * + */ +typedef struct usb_iso_request dwc_otg_pcd_iso_request_t; + +/** PCD EP structure. + * This structure describes an EP, there is an array of EPs in the PCD + * structure. + */ +typedef struct dwc_otg_pcd_ep +{ + /** USB EP data */ + struct usb_ep ep; + /** USB EP Descriptor */ + const struct usb_endpoint_descriptor *desc; + + /** queue of dwc_otg_pcd_requests. */ + struct list_head queue; + unsigned stopped : 1; + unsigned disabling : 1; + unsigned dma : 1; + unsigned queue_sof : 1; + +#ifdef DWC_EN_ISOC + /** DWC_otg Isochronous Transfer */ + struct usb_iso_request* iso_req; +#endif //DWC_EN_ISOC + + /** DWC_otg ep data. */ + dwc_ep_t dwc_ep; + + /** Pointer to PCD */ + struct dwc_otg_pcd *pcd; +}dwc_otg_pcd_ep_t; + + + +/** DWC_otg PCD Structure. + * This structure encapsulates the data for the dwc_otg PCD. + */ +typedef struct dwc_otg_pcd +{ + /** USB gadget */ + struct usb_gadget gadget; + /** USB gadget driver pointer*/ + struct usb_gadget_driver *driver; + /** The DWC otg device pointer. */ + struct dwc_otg_device *otg_dev; + + /** State of EP0 */ + ep0state_e ep0state; + /** EP0 Request is pending */ + unsigned ep0_pending : 1; + /** Indicates when SET CONFIGURATION Request is in process */ + unsigned request_config : 1; + /** The state of the Remote Wakeup Enable. */ + unsigned remote_wakeup_enable : 1; + /** The state of the B-Device HNP Enable. */ + unsigned b_hnp_enable : 1; + /** The state of A-Device HNP Support. */ + unsigned a_hnp_support : 1; + /** The state of the A-Device Alt HNP support. */ + unsigned a_alt_hnp_support : 1; + /** Count of pending Requests */ + unsigned request_pending; + + /** SETUP packet for EP0 + * This structure is allocated as a DMA buffer on PCD initialization + * with enough space for up to 3 setup packets. + */ + union + { + struct usb_ctrlrequest req; + uint32_t d32[2]; + } *setup_pkt; + + dma_addr_t setup_pkt_dma_handle; + + /** 2-byte dma buffer used to return status from GET_STATUS */ + uint16_t *status_buf; + dma_addr_t status_buf_dma_handle; + + /** EP0 */ + dwc_otg_pcd_ep_t ep0; + + /** Array of IN EPs. */ + dwc_otg_pcd_ep_t in_ep[ MAX_EPS_CHANNELS - 1]; + /** Array of OUT EPs. */ + dwc_otg_pcd_ep_t out_ep[ MAX_EPS_CHANNELS - 1]; + /** number of valid EPs in the above array. */ +// unsigned num_eps : 4; + spinlock_t lock; + /** Timer for SRP. If it expires before SRP is successful + * clear the SRP. */ + struct timer_list srp_timer; + + /** Tasklet to defer starting of TEST mode transmissions until + * Status Phase has been completed. + */ + struct tasklet_struct test_mode_tasklet; + + /** Tasklet to delay starting of xfer in DMA mode */ + struct tasklet_struct *start_xfer_tasklet; + + /** The test mode to enter when the tasklet is executed. */ + unsigned test_mode; + +} dwc_otg_pcd_t; + + +/** DWC_otg request structure. + * This structure is a list of requests. + */ +typedef struct +{ + struct usb_request req; /**< USB Request. */ + struct list_head queue; /**< queue of these requests. */ +} dwc_otg_pcd_request_t; + + +extern int dwc_otg_pcd_init(struct device *dev); + +//extern void dwc_otg_pcd_remove( struct dwc_otg_device *_otg_dev ); +extern void dwc_otg_pcd_remove( struct device *dev); +extern int32_t dwc_otg_pcd_handle_intr( dwc_otg_pcd_t *pcd ); +extern void dwc_otg_pcd_start_srp_timer(dwc_otg_pcd_t *pcd ); + +extern void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t *pcd); +extern void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t *pcd, int set); + +extern void dwc_otg_iso_buffer_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_iso_request_t *req); +extern void dwc_otg_request_done(dwc_otg_pcd_ep_t *_ep, dwc_otg_pcd_request_t *req, + int status); +extern void dwc_otg_request_nuke(dwc_otg_pcd_ep_t *_ep); +extern void dwc_otg_pcd_update_otg(dwc_otg_pcd_t *_pcd, + const unsigned reset); + +#endif +#endif /* DWC_HOST_ONLY */ diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_pcd_intr.c b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_pcd_intr.c new file mode 100644 index 0000000000..fd44fd89c3 --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_pcd_intr.c @@ -0,0 +1,3654 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_intr.c $ + * $Revision: 1.2 $ + * $Date: 2008-11-21 05:39:15 $ + * $Change: 1115682 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ +#ifndef DWC_HOST_ONLY +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/version.h> + +#include "dwc_otg_driver.h" +#include "dwc_otg_pcd.h" + + +#define DEBUG_EP0 + +/* request functions defined in "dwc_otg_pcd.c" */ + +/** @file + * This file contains the implementation of the PCD Interrupt handlers. + * + * The PCD handles the device interrupts. Many conditions can cause a + * device interrupt. When an interrupt occurs, the device interrupt + * service routine determines the cause of the interrupt and + * dispatches handling to the appropriate function. These interrupt + * handling functions are described below. + * All interrupt registers are processed from LSB to MSB. + */ + + +/** + * This function prints the ep0 state for debug purposes. + */ +static inline void print_ep0_state(dwc_otg_pcd_t *pcd) +{ +#ifdef DEBUG + char str[40]; + + switch (pcd->ep0state) { + case EP0_DISCONNECT: + strcpy(str, "EP0_DISCONNECT"); + break; + case EP0_IDLE: + strcpy(str, "EP0_IDLE"); + break; + case EP0_IN_DATA_PHASE: + strcpy(str, "EP0_IN_DATA_PHASE"); + break; + case EP0_OUT_DATA_PHASE: + strcpy(str, "EP0_OUT_DATA_PHASE"); + break; + case EP0_IN_STATUS_PHASE: + strcpy(str,"EP0_IN_STATUS_PHASE"); + break; + case EP0_OUT_STATUS_PHASE: + strcpy(str,"EP0_OUT_STATUS_PHASE"); + break; + case EP0_STALL: + strcpy(str,"EP0_STALL"); + break; + default: + strcpy(str,"EP0_INVALID"); + } + + DWC_DEBUGPL(DBG_ANY, "%s(%d)\n", str, pcd->ep0state); +#endif +} + +/** + * This function returns pointer to in ep struct with number ep_num + */ +static inline dwc_otg_pcd_ep_t* get_in_ep(dwc_otg_pcd_t *pcd, uint32_t ep_num) +{ + int i; + int num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps; + if(ep_num == 0) { + return &pcd->ep0; + } + else { + for(i = 0; i < num_in_eps; ++i) + { + if(pcd->in_ep[i].dwc_ep.num == ep_num) + return &pcd->in_ep[i]; + } + return 0; + } +} +/** + * This function returns pointer to out ep struct with number ep_num + */ +static inline dwc_otg_pcd_ep_t* get_out_ep(dwc_otg_pcd_t *pcd, uint32_t ep_num) +{ + int i; + int num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps; + if(ep_num == 0) { + return &pcd->ep0; + } + else { + for(i = 0; i < num_out_eps; ++i) + { + if(pcd->out_ep[i].dwc_ep.num == ep_num) + return &pcd->out_ep[i]; + } + return 0; + } +} +/** + * This functions gets a pointer to an EP from the wIndex address + * value of the control request. + */ +static dwc_otg_pcd_ep_t *get_ep_by_addr (dwc_otg_pcd_t *pcd, u16 wIndex) +{ + dwc_otg_pcd_ep_t *ep; + + if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0) + return &pcd->ep0; + list_for_each_entry(ep, &pcd->gadget.ep_list, ep.ep_list) + { + u8 bEndpointAddress; + + if (!ep->desc) + continue; + + bEndpointAddress = ep->desc->bEndpointAddress; + if((wIndex & (USB_DIR_IN | USB_ENDPOINT_NUMBER_MASK)) + == (bEndpointAddress & (USB_DIR_IN | USB_ENDPOINT_NUMBER_MASK))) + return ep; + } + return NULL; +} + +/** + * This function checks the EP request queue, if the queue is not + * empty the next request is started. + */ +void start_next_request(dwc_otg_pcd_ep_t *ep) +{ + dwc_otg_pcd_request_t *req = 0; + uint32_t max_transfer = GET_CORE_IF(ep->pcd)->core_params->max_transfer_size; + + if (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, + dwc_otg_pcd_request_t, queue); + + /* Setup and start the Transfer */ + ep->dwc_ep.dma_addr = req->req.dma; + ep->dwc_ep.start_xfer_buff = req->req.buf; + ep->dwc_ep.xfer_buff = req->req.buf; + ep->dwc_ep.sent_zlp = 0; + ep->dwc_ep.total_len = req->req.length; + ep->dwc_ep.xfer_len = 0; + ep->dwc_ep.xfer_count = 0; + + if(max_transfer > MAX_TRANSFER_SIZE) { + ep->dwc_ep.maxxfer = max_transfer - (max_transfer % ep->dwc_ep.maxpacket); + } else { + ep->dwc_ep.maxxfer = max_transfer; + } + + if(req->req.zero) { + if((ep->dwc_ep.total_len % ep->dwc_ep.maxpacket == 0) + && (ep->dwc_ep.total_len != 0)) { + ep->dwc_ep.sent_zlp = 1; + } + + } + + dwc_otg_ep_start_transfer(GET_CORE_IF(ep->pcd), &ep->dwc_ep); + } +} + +/** + * This function handles the SOF Interrupts. At this time the SOF + * Interrupt is disabled. + */ +int32_t dwc_otg_pcd_handle_sof_intr(dwc_otg_pcd_t *pcd) +{ + dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); + + gintsts_data_t gintsts; + + DWC_DEBUGPL(DBG_PCD, "SOF\n"); + + /* Clear interrupt */ + gintsts.d32 = 0; + gintsts.b.sofintr = 1; + dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32); + + return 1; +} + + +/** + * This function handles the Rx Status Queue Level Interrupt, which + * indicates that there is a least one packet in the Rx FIFO. The + * packets are moved from the FIFO to memory, where they will be + * processed when the Endpoint Interrupt Register indicates Transfer + * Complete or SETUP Phase Done. + * + * Repeat the following until the Rx Status Queue is empty: + * -# Read the Receive Status Pop Register (GRXSTSP) to get Packet + * info + * -# If Receive FIFO is empty then skip to step Clear the interrupt + * and exit + * -# If SETUP Packet call dwc_otg_read_setup_packet to copy the + * SETUP data to the buffer + * -# If OUT Data Packet call dwc_otg_read_packet to copy the data + * to the destination buffer + */ +int32_t dwc_otg_pcd_handle_rx_status_q_level_intr(dwc_otg_pcd_t *pcd) +{ + dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); + dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; + gintmsk_data_t gintmask = {.d32=0}; + device_grxsts_data_t status; + dwc_otg_pcd_ep_t *ep; + gintsts_data_t gintsts; +#ifdef DEBUG + static char *dpid_str[] ={ "D0", "D2", "D1", "MDATA" }; +#endif + + //DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, _pcd); + /* Disable the Rx Status Queue Level interrupt */ + gintmask.b.rxstsqlvl= 1; + dwc_modify_reg32(&global_regs->gintmsk, gintmask.d32, 0); + + /* Get the Status from the top of the FIFO */ + status.d32 = dwc_read_reg32(&global_regs->grxstsp); + + DWC_DEBUGPL(DBG_PCD, "EP:%d BCnt:%d DPID:%s " + "pktsts:%x Frame:%d(0x%0x)\n", + status.b.epnum, status.b.bcnt, + dpid_str[status.b.dpid], + status.b.pktsts, status.b.fn, status.b.fn); + /* Get pointer to EP structure */ + ep = get_out_ep(pcd, status.b.epnum); + + switch (status.b.pktsts) { + case DWC_DSTS_GOUT_NAK: + DWC_DEBUGPL(DBG_PCDV, "Global OUT NAK\n"); + break; + case DWC_STS_DATA_UPDT: + DWC_DEBUGPL(DBG_PCDV, "OUT Data Packet\n"); + if (status.b.bcnt && ep->dwc_ep.xfer_buff) { + /** @todo NGS Check for buffer overflow? */ + dwc_otg_read_packet(core_if, + ep->dwc_ep.xfer_buff, + status.b.bcnt); + ep->dwc_ep.xfer_count += status.b.bcnt; + ep->dwc_ep.xfer_buff += status.b.bcnt; + } + break; + case DWC_STS_XFER_COMP: + DWC_DEBUGPL(DBG_PCDV, "OUT Complete\n"); + break; + case DWC_DSTS_SETUP_COMP: +#ifdef DEBUG_EP0 + DWC_DEBUGPL(DBG_PCDV, "Setup Complete\n"); +#endif + break; +case DWC_DSTS_SETUP_UPDT: + dwc_otg_read_setup_packet(core_if, pcd->setup_pkt->d32); +#ifdef DEBUG_EP0 + DWC_DEBUGPL(DBG_PCD, + "SETUP PKT: %02x.%02x v%04x i%04x l%04x\n", + pcd->setup_pkt->req.bRequestType, + pcd->setup_pkt->req.bRequest, + pcd->setup_pkt->req.wValue, + pcd->setup_pkt->req.wIndex, + pcd->setup_pkt->req.wLength); +#endif + ep->dwc_ep.xfer_count += status.b.bcnt; + break; + default: + DWC_DEBUGPL(DBG_PCDV, "Invalid Packet Status (0x%0x)\n", + status.b.pktsts); + break; + } + + /* Enable the Rx Status Queue Level interrupt */ + dwc_modify_reg32(&global_regs->gintmsk, 0, gintmask.d32); + /* Clear interrupt */ + gintsts.d32 = 0; + gintsts.b.rxstsqlvl = 1; + dwc_write_reg32 (&global_regs->gintsts, gintsts.d32); + + //DWC_DEBUGPL(DBG_PCDV, "EXIT: %s\n", __func__); + return 1; +} +/** + * This function examines the Device IN Token Learning Queue to + * determine the EP number of the last IN token received. This + * implementation is for the Mass Storage device where there are only + * 2 IN EPs (Control-IN and BULK-IN). + * + * The EP numbers for the first six IN Tokens are in DTKNQR1 and there + * are 8 EP Numbers in each of the other possible DTKNQ Registers. + * + * @param core_if Programming view of DWC_otg controller. + * + */ +static inline int get_ep_of_last_in_token(dwc_otg_core_if_t *core_if) +{ + dwc_otg_device_global_regs_t *dev_global_regs = + core_if->dev_if->dev_global_regs; + const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth; + /* Number of Token Queue Registers */ + const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8; + dtknq1_data_t dtknqr1; + uint32_t in_tkn_epnums[4]; + int ndx = 0; + int i = 0; + volatile uint32_t *addr = &dev_global_regs->dtknqr1; + int epnum = 0; + + //DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH); + + + /* Read the DTKNQ Registers */ + for (i = 0; i < DTKNQ_REG_CNT; i++) + { + in_tkn_epnums[ i ] = dwc_read_reg32(addr); + DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i+1, + in_tkn_epnums[i]); + if (addr == &dev_global_regs->dvbusdis) { + addr = &dev_global_regs->dtknqr3_dthrctl; + } + else { + ++addr; + } + + } + + /* Copy the DTKNQR1 data to the bit field. */ + dtknqr1.d32 = in_tkn_epnums[0]; + /* Get the EP numbers */ + in_tkn_epnums[0] = dtknqr1.b.epnums0_5; + ndx = dtknqr1.b.intknwptr - 1; + + //DWC_DEBUGPL(DBG_PCDV,"ndx=%d\n",ndx); + if (ndx == -1) { + /** @todo Find a simpler way to calculate the max + * queue position.*/ + int cnt = TOKEN_Q_DEPTH; + if (TOKEN_Q_DEPTH <= 6) { + cnt = TOKEN_Q_DEPTH - 1; + } + else if (TOKEN_Q_DEPTH <= 14) { + cnt = TOKEN_Q_DEPTH - 7; + } + else if (TOKEN_Q_DEPTH <= 22) { + cnt = TOKEN_Q_DEPTH - 15; + } + else { + cnt = TOKEN_Q_DEPTH - 23; + } + epnum = (in_tkn_epnums[ DTKNQ_REG_CNT - 1 ] >> (cnt * 4)) & 0xF; + } + else { + if (ndx <= 5) { + epnum = (in_tkn_epnums[0] >> (ndx * 4)) & 0xF; + } + else if (ndx <= 13) { + ndx -= 6; + epnum = (in_tkn_epnums[1] >> (ndx * 4)) & 0xF; + } + else if (ndx <= 21) { + ndx -= 14; + epnum = (in_tkn_epnums[2] >> (ndx * 4)) & 0xF; + } + else if (ndx <= 29) { + ndx -= 22; + epnum = (in_tkn_epnums[3] >> (ndx * 4)) & 0xF; + } + } + //DWC_DEBUGPL(DBG_PCD,"epnum=%d\n",epnum); + return epnum; +} + +/** + * This interrupt occurs when the non-periodic Tx FIFO is half-empty. + * The active request is checked for the next packet to be loaded into + * the non-periodic Tx FIFO. + */ +int32_t dwc_otg_pcd_handle_np_tx_fifo_empty_intr(dwc_otg_pcd_t *pcd) +{ + dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); + dwc_otg_core_global_regs_t *global_regs = + core_if->core_global_regs; + dwc_otg_dev_in_ep_regs_t *ep_regs; + gnptxsts_data_t txstatus = {.d32 = 0}; + gintsts_data_t gintsts; + + int epnum = 0; + dwc_otg_pcd_ep_t *ep = 0; + uint32_t len = 0; + int dwords; + + /* Get the epnum from the IN Token Learning Queue. */ + epnum = get_ep_of_last_in_token(core_if); + ep = get_in_ep(pcd, epnum); + + DWC_DEBUGPL(DBG_PCD, "NP TxFifo Empty: %s(%d) \n", ep->ep.name, epnum); + ep_regs = core_if->dev_if->in_ep_regs[epnum]; + + len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; + if (len > ep->dwc_ep.maxpacket) { + len = ep->dwc_ep.maxpacket; + } + dwords = (len + 3)/4; + + + /* While there is space in the queue and space in the FIFO and + * More data to tranfer, Write packets to the Tx FIFO */ + txstatus.d32 = dwc_read_reg32(&global_regs->gnptxsts); + DWC_DEBUGPL(DBG_PCDV, "b4 GNPTXSTS=0x%08x\n",txstatus.d32); + + while (txstatus.b.nptxqspcavail > 0 && + txstatus.b.nptxfspcavail > dwords && + ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len) { + /* Write the FIFO */ + dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0); + len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; + + if (len > ep->dwc_ep.maxpacket) { + len = ep->dwc_ep.maxpacket; + } + + dwords = (len + 3)/4; + txstatus.d32 = dwc_read_reg32(&global_regs->gnptxsts); + DWC_DEBUGPL(DBG_PCDV,"GNPTXSTS=0x%08x\n",txstatus.d32); + } + + DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n", + dwc_read_reg32(&global_regs->gnptxsts)); + + /* Clear interrupt */ + gintsts.d32 = 0; + gintsts.b.nptxfempty = 1; + dwc_write_reg32 (&global_regs->gintsts, gintsts.d32); + + return 1; +} + +/** + * This function is called when dedicated Tx FIFO Empty interrupt occurs. + * The active request is checked for the next packet to be loaded into + * apropriate Tx FIFO. + */ +static int32_t write_empty_tx_fifo(dwc_otg_pcd_t *pcd, uint32_t epnum) +{ + dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); + dwc_otg_dev_if_t* dev_if = core_if->dev_if; + dwc_otg_dev_in_ep_regs_t *ep_regs; + dtxfsts_data_t txstatus = {.d32 = 0}; + dwc_otg_pcd_ep_t *ep = 0; + uint32_t len = 0; + int dwords; + + ep = get_in_ep(pcd, epnum); + + DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %s(%d) \n", ep->ep.name, epnum); + + ep_regs = core_if->dev_if->in_ep_regs[epnum]; + + len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; + + if (len > ep->dwc_ep.maxpacket) { + len = ep->dwc_ep.maxpacket; + } + + dwords = (len + 3)/4; + + /* While there is space in the queue and space in the FIFO and + * More data to tranfer, Write packets to the Tx FIFO */ + txstatus.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts); + DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",epnum,txstatus.d32); + + while (txstatus.b.txfspcavail > dwords && + ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len && + ep->dwc_ep.xfer_len != 0) { + /* Write the FIFO */ + dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0); + + len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; + if (len > ep->dwc_ep.maxpacket) { + len = ep->dwc_ep.maxpacket; + } + + dwords = (len + 3)/4; + txstatus.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts); + DWC_DEBUGPL(DBG_PCDV,"dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32); + } + + DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",epnum,dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts)); + + return 1; +} + + +/** + * This function is called when the Device is disconnected. It stops + * any active requests and informs the Gadget driver of the + * disconnect. + */ +void dwc_otg_pcd_stop(dwc_otg_pcd_t *pcd) +{ + int i, num_in_eps, num_out_eps; + dwc_otg_pcd_ep_t *ep; + + gintmsk_data_t intr_mask = {.d32 = 0}; + + num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps; + num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps; + + DWC_DEBUGPL(DBG_PCDV, "%s() \n", __func__); + /* don't disconnect drivers more than once */ + if (pcd->ep0state == EP0_DISCONNECT) { + DWC_DEBUGPL(DBG_ANY, "%s() Already Disconnected\n", __func__); + return; + } + pcd->ep0state = EP0_DISCONNECT; + + /* Reset the OTG state. */ + dwc_otg_pcd_update_otg(pcd, 1); + + /* Disable the NP Tx Fifo Empty Interrupt. */ + intr_mask.b.nptxfempty = 1; + dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, + intr_mask.d32, 0); + + /* Flush the FIFOs */ + /**@todo NGS Flush Periodic FIFOs */ + dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd), 0x10); + dwc_otg_flush_rx_fifo(GET_CORE_IF(pcd)); + + /* prevent new request submissions, kill any outstanding requests */ + ep = &pcd->ep0; + dwc_otg_request_nuke(ep); + /* prevent new request submissions, kill any outstanding requests */ + for (i = 0; i < num_in_eps; i++) + { + dwc_otg_pcd_ep_t *ep = &pcd->in_ep[i]; + dwc_otg_request_nuke(ep); + } + /* prevent new request submissions, kill any outstanding requests */ + for (i = 0; i < num_out_eps; i++) + { + dwc_otg_pcd_ep_t *ep = &pcd->out_ep[i]; + dwc_otg_request_nuke(ep); + } + + /* report disconnect; the driver is already quiesced */ + if (pcd->driver && pcd->driver->disconnect) { + SPIN_UNLOCK(&pcd->lock); + pcd->driver->disconnect(&pcd->gadget); + SPIN_LOCK(&pcd->lock); + } +} + +/** + * This interrupt indicates that ... + */ +int32_t dwc_otg_pcd_handle_i2c_intr(dwc_otg_pcd_t *pcd) +{ + gintmsk_data_t intr_mask = { .d32 = 0}; + gintsts_data_t gintsts; + + DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "i2cintr"); + intr_mask.b.i2cintr = 1; + dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, + intr_mask.d32, 0); + + /* Clear interrupt */ + gintsts.d32 = 0; + gintsts.b.i2cintr = 1; + dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts, + gintsts.d32); + return 1; +} + + +/** + * This interrupt indicates that ... + */ +int32_t dwc_otg_pcd_handle_early_suspend_intr(dwc_otg_pcd_t *pcd) +{ + gintsts_data_t gintsts; +#if defined(VERBOSE) + DWC_PRINT("Early Suspend Detected\n"); +#endif + /* Clear interrupt */ + gintsts.d32 = 0; + gintsts.b.erlysuspend = 1; + dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, + gintsts.d32); + return 1; +} + +/** + * This function configures EPO to receive SETUP packets. + * + * @todo NGS: Update the comments from the HW FS. + * + * -# Program the following fields in the endpoint specific registers + * for Control OUT EP 0, in order to receive a setup packet + * - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back + * setup packets) + * - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back + * to back setup packets) + * - In DMA mode, DOEPDMA0 Register with a memory address to + * store any setup packets received + * + * @param core_if Programming view of DWC_otg controller. + * @param pcd Programming view of the PCD. + */ +static inline void ep0_out_start(dwc_otg_core_if_t *core_if, dwc_otg_pcd_t *pcd) +{ + dwc_otg_dev_if_t *dev_if = core_if->dev_if; + deptsiz0_data_t doeptsize0 = { .d32 = 0}; + dwc_otg_dma_desc_t* dma_desc; + depctl_data_t doepctl = { .d32 = 0 }; + +#ifdef VERBOSE + DWC_DEBUGPL(DBG_PCDV,"%s() doepctl0=%0x\n", __func__, + dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl)); +#endif + + doeptsize0.b.supcnt = 3; + doeptsize0.b.pktcnt = 1; + doeptsize0.b.xfersize = 8*3; + + + if (core_if->dma_enable) { + if (!core_if->dma_desc_enable) { + /** put here as for Hermes mode deptisz register should not be written */ + dwc_write_reg32(&dev_if->out_ep_regs[0]->doeptsiz, + doeptsize0.d32); + + /** @todo dma needs to handle multiple setup packets (up to 3) */ + dwc_write_reg32(&dev_if->out_ep_regs[0]->doepdma, + pcd->setup_pkt_dma_handle); + } else { + dev_if->setup_desc_index = (dev_if->setup_desc_index + 1) & 1; + dma_desc = dev_if->setup_desc_addr[dev_if->setup_desc_index]; + + /** DMA Descriptor Setup */ + dma_desc->status.b.bs = BS_HOST_BUSY; + dma_desc->status.b.l = 1; + dma_desc->status.b.ioc = 1; + dma_desc->status.b.bytes = pcd->ep0.dwc_ep.maxpacket; + dma_desc->buf = pcd->setup_pkt_dma_handle; + dma_desc->status.b.bs = BS_HOST_READY; + + /** DOEPDMA0 Register write */ + dwc_write_reg32(&dev_if->out_ep_regs[0]->doepdma, dev_if->dma_setup_desc_addr[dev_if->setup_desc_index]); + } + + } else { + /** put here as for Hermes mode deptisz register should not be written */ + dwc_write_reg32(&dev_if->out_ep_regs[0]->doeptsiz, + doeptsize0.d32); + } + + /** DOEPCTL0 Register write */ + doepctl.b.epena = 1; + doepctl.b.cnak = 1; + dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32); + +#ifdef VERBOSE + DWC_DEBUGPL(DBG_PCDV,"doepctl0=%0x\n", + dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl)); + DWC_DEBUGPL(DBG_PCDV,"diepctl0=%0x\n", + dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl)); +#endif +} + + +/** + * This interrupt occurs when a USB Reset is detected. When the USB + * Reset Interrupt occurs the device state is set to DEFAULT and the + * EP0 state is set to IDLE. + * -# Set the NAK bit for all OUT endpoints (DOEPCTLn.SNAK = 1) + * -# Unmask the following interrupt bits + * - DAINTMSK.INEP0 = 1 (Control 0 IN endpoint) + * - DAINTMSK.OUTEP0 = 1 (Control 0 OUT endpoint) + * - DOEPMSK.SETUP = 1 + * - DOEPMSK.XferCompl = 1 + * - DIEPMSK.XferCompl = 1 + * - DIEPMSK.TimeOut = 1 + * -# Program the following fields in the endpoint specific registers + * for Control OUT EP 0, in order to receive a setup packet + * - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back + * setup packets) + * - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back + * to back setup packets) + * - In DMA mode, DOEPDMA0 Register with a memory address to + * store any setup packets received + * At this point, all the required initialization, except for enabling + * the control 0 OUT endpoint is done, for receiving SETUP packets. + */ +int32_t dwc_otg_pcd_handle_usb_reset_intr(dwc_otg_pcd_t * pcd) +{ + dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); + dwc_otg_dev_if_t *dev_if = core_if->dev_if; + depctl_data_t doepctl = { .d32 = 0}; + + daint_data_t daintmsk = { .d32 = 0}; + doepmsk_data_t doepmsk = { .d32 = 0}; + diepmsk_data_t diepmsk = { .d32 = 0}; + + dcfg_data_t dcfg = { .d32=0 }; + grstctl_t resetctl = { .d32=0 }; + dctl_data_t dctl = {.d32=0}; + int i = 0; + gintsts_data_t gintsts; + + DWC_PRINT("USB RESET\n"); +#ifdef DWC_EN_ISOC + for(i = 1;i < 16; ++i) + { + dwc_otg_pcd_ep_t *ep; + dwc_ep_t *dwc_ep; + ep = get_in_ep(pcd,i); + if(ep != 0){ + dwc_ep = &ep->dwc_ep; + dwc_ep->next_frame = 0xffffffff; + } + } +#endif /* DWC_EN_ISOC */ + + /* reset the HNP settings */ + dwc_otg_pcd_update_otg(pcd, 1); + + /* Clear the Remote Wakeup Signalling */ + dctl.b.rmtwkupsig = 1; + dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl, + dctl.d32, 0); + + /* Set NAK for all OUT EPs */ + doepctl.b.snak = 1; + for (i=0; i <= dev_if->num_out_eps; i++) + { + dwc_write_reg32(&dev_if->out_ep_regs[i]->doepctl, + doepctl.d32); + } + + /* Flush the NP Tx FIFO */ + dwc_otg_flush_tx_fifo(core_if, 0x10); + /* Flush the Learning Queue */ + resetctl.b.intknqflsh = 1; + dwc_write_reg32(&core_if->core_global_regs->grstctl, resetctl.d32); + + if(core_if->multiproc_int_enable) { + daintmsk.b.inep0 = 1; + daintmsk.b.outep0 = 1; + dwc_write_reg32(&dev_if->dev_global_regs->deachintmsk, daintmsk.d32); + + doepmsk.b.setup = 1; + doepmsk.b.xfercompl = 1; + doepmsk.b.ahberr = 1; + doepmsk.b.epdisabled = 1; + + if(core_if->dma_desc_enable) { + doepmsk.b.stsphsercvd = 1; + doepmsk.b.bna = 1; + } +/* + doepmsk.b.babble = 1; + doepmsk.b.nyet = 1; + + if(core_if->dma_enable) { + doepmsk.b.nak = 1; + } +*/ + dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[0], doepmsk.d32); + + diepmsk.b.xfercompl = 1; + diepmsk.b.timeout = 1; + diepmsk.b.epdisabled = 1; + diepmsk.b.ahberr = 1; + diepmsk.b.intknepmis = 1; + + if(core_if->dma_desc_enable) { + diepmsk.b.bna = 1; + } +/* + if(core_if->dma_enable) { + diepmsk.b.nak = 1; + } +*/ + dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[0], diepmsk.d32); + } else{ + daintmsk.b.inep0 = 1; + daintmsk.b.outep0 = 1; + dwc_write_reg32(&dev_if->dev_global_regs->daintmsk, daintmsk.d32); + + doepmsk.b.setup = 1; + doepmsk.b.xfercompl = 1; + doepmsk.b.ahberr = 1; + doepmsk.b.epdisabled = 1; + + if(core_if->dma_desc_enable) { + doepmsk.b.stsphsercvd = 1; + doepmsk.b.bna = 1; + } +/* + doepmsk.b.babble = 1; + doepmsk.b.nyet = 1; + doepmsk.b.nak = 1; +*/ + dwc_write_reg32(&dev_if->dev_global_regs->doepmsk, doepmsk.d32); + + diepmsk.b.xfercompl = 1; + diepmsk.b.timeout = 1; + diepmsk.b.epdisabled = 1; + diepmsk.b.ahberr = 1; + diepmsk.b.intknepmis = 1; + + if(core_if->dma_desc_enable) { + diepmsk.b.bna = 1; + } + +// diepmsk.b.nak = 1; + + dwc_write_reg32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32); + } + + /* Reset Device Address */ + dcfg.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dcfg); + dcfg.b.devaddr = 0; + dwc_write_reg32(&dev_if->dev_global_regs->dcfg, dcfg.d32); + + /* setup EP0 to receive SETUP packets */ + ep0_out_start(core_if, pcd); + + /* Clear interrupt */ + gintsts.d32 = 0; + gintsts.b.usbreset = 1; + dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32); + + return 1; +} + +/** + * Get the device speed from the device status register and convert it + * to USB speed constant. + * + * @param core_if Programming view of DWC_otg controller. + */ +static int get_device_speed(dwc_otg_core_if_t *core_if) +{ + dsts_data_t dsts; + enum usb_device_speed speed = USB_SPEED_UNKNOWN; + dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts); + + switch (dsts.b.enumspd) { + case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ: + speed = USB_SPEED_HIGH; + break; + case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ: + case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ: + speed = USB_SPEED_FULL; + break; + + case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ: + speed = USB_SPEED_LOW; + break; + } + + return speed; +} + +/** + * Read the device status register and set the device speed in the + * data structure. + * Set up EP0 to receive SETUP packets by calling dwc_ep0_activate. + */ +int32_t dwc_otg_pcd_handle_enum_done_intr(dwc_otg_pcd_t *pcd) +{ + dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; + gintsts_data_t gintsts; + gusbcfg_data_t gusbcfg; + dwc_otg_core_global_regs_t *global_regs = + GET_CORE_IF(pcd)->core_global_regs; + uint8_t utmi16b, utmi8b; + DWC_DEBUGPL(DBG_PCD, "SPEED ENUM\n"); + + if (GET_CORE_IF(pcd)->snpsid >= 0x4F54260A) { + utmi16b = 6; + utmi8b = 9; + } else { + utmi16b = 4; + utmi8b = 8; + } + dwc_otg_ep0_activate(GET_CORE_IF(pcd), &ep0->dwc_ep); + +#ifdef DEBUG_EP0 + print_ep0_state(pcd); +#endif + + if (pcd->ep0state == EP0_DISCONNECT) { + pcd->ep0state = EP0_IDLE; + } + else if (pcd->ep0state == EP0_STALL) { + pcd->ep0state = EP0_IDLE; + } + + pcd->ep0state = EP0_IDLE; + + ep0->stopped = 0; + + pcd->gadget.speed = get_device_speed(GET_CORE_IF(pcd)); + + /* Set USB turnaround time based on device speed and PHY interface. */ + gusbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); + if (pcd->gadget.speed == USB_SPEED_HIGH) { + if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == DWC_HWCFG2_HS_PHY_TYPE_ULPI) { + /* ULPI interface */ + gusbcfg.b.usbtrdtim = 9; + } + if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == DWC_HWCFG2_HS_PHY_TYPE_UTMI) { + /* UTMI+ interface */ + if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 0) { + gusbcfg.b.usbtrdtim = utmi8b; + } + else if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 1) { + gusbcfg.b.usbtrdtim = utmi16b; + } + else if (GET_CORE_IF(pcd)->core_params->phy_utmi_width == 8) { + gusbcfg.b.usbtrdtim = utmi8b; + } + else { + gusbcfg.b.usbtrdtim = utmi16b; + } + } + if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI) { + /* UTMI+ OR ULPI interface */ + if (gusbcfg.b.ulpi_utmi_sel == 1) { + /* ULPI interface */ + gusbcfg.b.usbtrdtim = 9; + } + else { + /* UTMI+ interface */ + if (GET_CORE_IF(pcd)->core_params->phy_utmi_width == 16) { + gusbcfg.b.usbtrdtim = utmi16b; + } + else { + gusbcfg.b.usbtrdtim = utmi8b; + } + } + } + } + else { + /* Full or low speed */ + gusbcfg.b.usbtrdtim = 9; + } + dwc_write_reg32(&global_regs->gusbcfg, gusbcfg.d32); + + /* Clear interrupt */ + gintsts.d32 = 0; + gintsts.b.enumdone = 1; + dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, + gintsts.d32); + return 1; +} + +/** + * This interrupt indicates that the ISO OUT Packet was dropped due to + * Rx FIFO full or Rx Status Queue Full. If this interrupt occurs + * read all the data from the Rx FIFO. + */ +int32_t dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(dwc_otg_pcd_t *pcd) +{ + gintmsk_data_t intr_mask = { .d32 = 0}; + gintsts_data_t gintsts; + + DWC_PRINT("INTERRUPT Handler not implemented for %s\n", + "ISOC Out Dropped"); + + intr_mask.b.isooutdrop = 1; + dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, + intr_mask.d32, 0); + + /* Clear interrupt */ + + gintsts.d32 = 0; + gintsts.b.isooutdrop = 1; + dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, + gintsts.d32); + + return 1; +} + +/** + * This interrupt indicates the end of the portion of the micro-frame + * for periodic transactions. If there is a periodic transaction for + * the next frame, load the packets into the EP periodic Tx FIFO. + */ +int32_t dwc_otg_pcd_handle_end_periodic_frame_intr(dwc_otg_pcd_t *pcd) +{ + gintmsk_data_t intr_mask = { .d32 = 0}; + gintsts_data_t gintsts; + DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "EOP"); + + intr_mask.b.eopframe = 1; + dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, + intr_mask.d32, 0); + + /* Clear interrupt */ + gintsts.d32 = 0; + gintsts.b.eopframe = 1; + dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, gintsts.d32); + + return 1; +} + +/** + * This interrupt indicates that EP of the packet on the top of the + * non-periodic Tx FIFO does not match EP of the IN Token received. + * + * The "Device IN Token Queue" Registers are read to determine the + * order the IN Tokens have been received. The non-periodic Tx FIFO + * is flushed, so it can be reloaded in the order seen in the IN Token + * Queue. + */ +int32_t dwc_otg_pcd_handle_ep_mismatch_intr(dwc_otg_core_if_t *core_if) +{ + gintsts_data_t gintsts; + DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if); + + /* Clear interrupt */ + gintsts.d32 = 0; + gintsts.b.epmismatch = 1; + dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32); + + return 1; +} + +/** + * This funcion stalls EP0. + */ +static inline void ep0_do_stall(dwc_otg_pcd_t *pcd, const int err_val) +{ + dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; + struct usb_ctrlrequest *ctrl = &pcd->setup_pkt->req; + DWC_WARN("req %02x.%02x protocol STALL; err %d\n", + ctrl->bRequestType, ctrl->bRequest, err_val); + + ep0->dwc_ep.is_in = 1; + dwc_otg_ep_set_stall(pcd->otg_dev->core_if, &ep0->dwc_ep); + pcd->ep0.stopped = 1; + pcd->ep0state = EP0_IDLE; + ep0_out_start(GET_CORE_IF(pcd), pcd); +} + +/** + * This functions delegates the setup command to the gadget driver. + */ +static inline void do_gadget_setup(dwc_otg_pcd_t *pcd, + struct usb_ctrlrequest * ctrl) +{ + int ret = 0; + if (pcd->driver && pcd->driver->setup) { + SPIN_UNLOCK(&pcd->lock); + ret = pcd->driver->setup(&pcd->gadget, ctrl); + SPIN_LOCK(&pcd->lock); + if (ret < 0) { + ep0_do_stall(pcd, ret); + } + + /** @todo This is a g_file_storage gadget driver specific + * workaround: a DELAYED_STATUS result from the fsg_setup + * routine will result in the gadget queueing a EP0 IN status + * phase for a two-stage control transfer. Exactly the same as + * a SET_CONFIGURATION/SET_INTERFACE except that this is a class + * specific request. Need a generic way to know when the gadget + * driver will queue the status phase. Can we assume when we + * call the gadget driver setup() function that it will always + * queue and require the following flag? Need to look into + * this. + */ + + if (ret == 256 + 999) { + pcd->request_config = 1; + } + } +} + +/** + * This function starts the Zero-Length Packet for the IN status phase + * of a 2 stage control transfer. + */ +static inline void do_setup_in_status_phase(dwc_otg_pcd_t *pcd) +{ + dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; + if (pcd->ep0state == EP0_STALL) { + return; + } + + pcd->ep0state = EP0_IN_STATUS_PHASE; + + /* Prepare for more SETUP Packets */ + DWC_DEBUGPL(DBG_PCD, "EP0 IN ZLP\n"); + ep0->dwc_ep.xfer_len = 0; + ep0->dwc_ep.xfer_count = 0; + ep0->dwc_ep.is_in = 1; + ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle; + dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep); + + /* Prepare for more SETUP Packets */ +// if(GET_CORE_IF(pcd)->dma_enable == 0) ep0_out_start(GET_CORE_IF(pcd), pcd); +} + +/** + * This function starts the Zero-Length Packet for the OUT status phase + * of a 2 stage control transfer. + */ +static inline void do_setup_out_status_phase(dwc_otg_pcd_t *pcd) +{ + dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; + if (pcd->ep0state == EP0_STALL) { + DWC_DEBUGPL(DBG_PCD, "EP0 STALLED\n"); + return; + } + pcd->ep0state = EP0_OUT_STATUS_PHASE; + + DWC_DEBUGPL(DBG_PCD, "EP0 OUT ZLP\n"); + ep0->dwc_ep.xfer_len = 0; + ep0->dwc_ep.xfer_count = 0; + ep0->dwc_ep.is_in = 0; + ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle; + dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep); + + /* Prepare for more SETUP Packets */ + if(GET_CORE_IF(pcd)->dma_enable == 0) { + ep0_out_start(GET_CORE_IF(pcd), pcd); + } +} + +/** + * Clear the EP halt (STALL) and if pending requests start the + * transfer. + */ +static inline void pcd_clear_halt(dwc_otg_pcd_t *pcd, dwc_otg_pcd_ep_t *ep) +{ + if(ep->dwc_ep.stall_clear_flag == 0) + dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep); + + /* Reactive the EP */ + dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep); + if (ep->stopped) { + ep->stopped = 0; + /* If there is a request in the EP queue start it */ + + /** @todo FIXME: this causes an EP mismatch in DMA mode. + * epmismatch not yet implemented. */ + + /* + * Above fixme is solved by implmenting a tasklet to call the + * start_next_request(), outside of interrupt context at some + * time after the current time, after a clear-halt setup packet. + * Still need to implement ep mismatch in the future if a gadget + * ever uses more than one endpoint at once + */ + ep->queue_sof = 1; + tasklet_schedule (pcd->start_xfer_tasklet); + } + /* Start Control Status Phase */ + do_setup_in_status_phase(pcd); +} + +/** + * This function is called when the SET_FEATURE TEST_MODE Setup packet + * is sent from the host. The Device Control register is written with + * the Test Mode bits set to the specified Test Mode. This is done as + * a tasklet so that the "Status" phase of the control transfer + * completes before transmitting the TEST packets. + * + * @todo This has not been tested since the tasklet struct was put + * into the PCD struct! + * + */ +static void do_test_mode(unsigned long data) +{ + dctl_data_t dctl; + dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)data; + dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); + int test_mode = pcd->test_mode; + + +// DWC_WARN("%s() has not been tested since being rewritten!\n", __func__); + + dctl.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dctl); + switch (test_mode) { + case 1: // TEST_J + dctl.b.tstctl = 1; + break; + + case 2: // TEST_K + dctl.b.tstctl = 2; + break; + + case 3: // TEST_SE0_NAK + dctl.b.tstctl = 3; + break; + + case 4: // TEST_PACKET + dctl.b.tstctl = 4; + break; + + case 5: // TEST_FORCE_ENABLE + dctl.b.tstctl = 5; + break; + } + dwc_write_reg32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32); +} + +/** + * This function process the GET_STATUS Setup Commands. + */ +static inline void do_get_status(dwc_otg_pcd_t *pcd) +{ + struct usb_ctrlrequest ctrl = pcd->setup_pkt->req; + dwc_otg_pcd_ep_t *ep; + dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; + uint16_t *status = pcd->status_buf; + +#ifdef DEBUG_EP0 + DWC_DEBUGPL(DBG_PCD, + "GET_STATUS %02x.%02x v%04x i%04x l%04x\n", + ctrl.bRequestType, ctrl.bRequest, + ctrl.wValue, ctrl.wIndex, ctrl.wLength); +#endif + + switch (ctrl.bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + *status = 0x1; /* Self powered */ + *status |= pcd->remote_wakeup_enable << 1; + break; + + case USB_RECIP_INTERFACE: + *status = 0; + break; + + case USB_RECIP_ENDPOINT: + ep = get_ep_by_addr(pcd, ctrl.wIndex); + if (ep == 0 || ctrl.wLength > 2) { + ep0_do_stall(pcd, -EOPNOTSUPP); + return; + } + /** @todo check for EP stall */ + *status = ep->stopped; + break; + } + pcd->ep0_pending = 1; + ep0->dwc_ep.start_xfer_buff = (uint8_t *)status; + ep0->dwc_ep.xfer_buff = (uint8_t *)status; + ep0->dwc_ep.dma_addr = pcd->status_buf_dma_handle; + ep0->dwc_ep.xfer_len = 2; + ep0->dwc_ep.xfer_count = 0; + ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len; + dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep); +} +/** + * This function process the SET_FEATURE Setup Commands. + */ +static inline void do_set_feature(dwc_otg_pcd_t *pcd) +{ + dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); + dwc_otg_core_global_regs_t *global_regs = + core_if->core_global_regs; + struct usb_ctrlrequest ctrl = pcd->setup_pkt->req; + dwc_otg_pcd_ep_t *ep = 0; + int32_t otg_cap_param = core_if->core_params->otg_cap; + gotgctl_data_t gotgctl = { .d32 = 0 }; + + DWC_DEBUGPL(DBG_PCD, "SET_FEATURE:%02x.%02x v%04x i%04x l%04x\n", + ctrl.bRequestType, ctrl.bRequest, + ctrl.wValue, ctrl.wIndex, ctrl.wLength); + DWC_DEBUGPL(DBG_PCD,"otg_cap=%d\n", otg_cap_param); + + + switch (ctrl.bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + switch (ctrl.wValue) { + case USB_DEVICE_REMOTE_WAKEUP: + pcd->remote_wakeup_enable = 1; + break; + + case USB_DEVICE_TEST_MODE: + /* Setup the Test Mode tasklet to do the Test + * Packet generation after the SETUP Status + * phase has completed. */ + + /** @todo This has not been tested since the + * tasklet struct was put into the PCD + * struct! */ + pcd->test_mode_tasklet.next = 0; + pcd->test_mode_tasklet.state = 0; + atomic_set(&pcd->test_mode_tasklet.count, 0); + pcd->test_mode_tasklet.func = do_test_mode; + pcd->test_mode_tasklet.data = (unsigned long)pcd; + pcd->test_mode = ctrl.wIndex >> 8; + tasklet_schedule(&pcd->test_mode_tasklet); + break; + + case USB_DEVICE_B_HNP_ENABLE: + DWC_DEBUGPL(DBG_PCDV, "SET_FEATURE: USB_DEVICE_B_HNP_ENABLE\n"); + + /* dev may initiate HNP */ + if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { + pcd->b_hnp_enable = 1; + dwc_otg_pcd_update_otg(pcd, 0); + DWC_DEBUGPL(DBG_PCD, "Request B HNP\n"); + /**@todo Is the gotgctl.devhnpen cleared + * by a USB Reset? */ + gotgctl.b.devhnpen = 1; + gotgctl.b.hnpreq = 1; + dwc_write_reg32(&global_regs->gotgctl, gotgctl.d32); + } + else { + ep0_do_stall(pcd, -EOPNOTSUPP); + } + break; + + case USB_DEVICE_A_HNP_SUPPORT: + /* RH port supports HNP */ + DWC_DEBUGPL(DBG_PCDV, "SET_FEATURE: USB_DEVICE_A_HNP_SUPPORT\n"); + if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { + pcd->a_hnp_support = 1; + dwc_otg_pcd_update_otg(pcd, 0); + } + else { + ep0_do_stall(pcd, -EOPNOTSUPP); + } + break; + + case USB_DEVICE_A_ALT_HNP_SUPPORT: + /* other RH port does */ + DWC_DEBUGPL(DBG_PCDV, "SET_FEATURE: USB_DEVICE_A_ALT_HNP_SUPPORT\n"); + if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { + pcd->a_alt_hnp_support = 1; + dwc_otg_pcd_update_otg(pcd, 0); + } + else { + ep0_do_stall(pcd, -EOPNOTSUPP); + } + break; + } + do_setup_in_status_phase(pcd); + break; + + case USB_RECIP_INTERFACE: + do_gadget_setup(pcd, &ctrl); + break; + + case USB_RECIP_ENDPOINT: + if (ctrl.wValue == USB_ENDPOINT_HALT) { + ep = get_ep_by_addr(pcd, ctrl.wIndex); + if (ep == 0) { + ep0_do_stall(pcd, -EOPNOTSUPP); + return; + } + ep->stopped = 1; + dwc_otg_ep_set_stall(core_if, &ep->dwc_ep); + } + do_setup_in_status_phase(pcd); + break; + } +} + +/** + * This function process the CLEAR_FEATURE Setup Commands. + */ +static inline void do_clear_feature(dwc_otg_pcd_t *pcd) +{ + struct usb_ctrlrequest ctrl = pcd->setup_pkt->req; + dwc_otg_pcd_ep_t *ep = 0; + + DWC_DEBUGPL(DBG_PCD, + "CLEAR_FEATURE:%02x.%02x v%04x i%04x l%04x\n", + ctrl.bRequestType, ctrl.bRequest, + ctrl.wValue, ctrl.wIndex, ctrl.wLength); + + switch (ctrl.bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + switch (ctrl.wValue) { + case USB_DEVICE_REMOTE_WAKEUP: + pcd->remote_wakeup_enable = 0; + break; + + case USB_DEVICE_TEST_MODE: + /** @todo Add CLEAR_FEATURE for TEST modes. */ + break; + } + do_setup_in_status_phase(pcd); + break; + + case USB_RECIP_ENDPOINT: + ep = get_ep_by_addr(pcd, ctrl.wIndex); + if (ep == 0) { + ep0_do_stall(pcd, -EOPNOTSUPP); + return; + } + + pcd_clear_halt(pcd, ep); + + break; + } +} + +/** + * This function process the SET_ADDRESS Setup Commands. + */ +static inline void do_set_address(dwc_otg_pcd_t *pcd) +{ + dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if; + struct usb_ctrlrequest ctrl = pcd->setup_pkt->req; + + if (ctrl.bRequestType == USB_RECIP_DEVICE) { + dcfg_data_t dcfg = {.d32=0}; + +#ifdef DEBUG_EP0 +// DWC_DEBUGPL(DBG_PCDV, "SET_ADDRESS:%d\n", ctrl.wValue); +#endif + dcfg.b.devaddr = ctrl.wValue; + dwc_modify_reg32(&dev_if->dev_global_regs->dcfg, 0, dcfg.d32); + do_setup_in_status_phase(pcd); + } +} + +/** + * This function processes SETUP commands. In Linux, the USB Command + * processing is done in two places - the first being the PCD and the + * second in the Gadget Driver (for example, the File-Backed Storage + * Gadget Driver). + * + * <table> + * <tr><td>Command </td><td>Driver </td><td>Description</td></tr> + * + * <tr><td>GET_STATUS </td><td>PCD </td><td>Command is processed as + * defined in chapter 9 of the USB 2.0 Specification chapter 9 + * </td></tr> + * + * <tr><td>CLEAR_FEATURE </td><td>PCD </td><td>The Device and Endpoint + * requests are the ENDPOINT_HALT feature is procesed, all others the + * interface requests are ignored.</td></tr> + * + * <tr><td>SET_FEATURE </td><td>PCD </td><td>The Device and Endpoint + * requests are processed by the PCD. Interface requests are passed + * to the Gadget Driver.</td></tr> + * + * <tr><td>SET_ADDRESS </td><td>PCD </td><td>Program the DCFG reg, + * with device address received </td></tr> + * + * <tr><td>GET_DESCRIPTOR </td><td>Gadget Driver </td><td>Return the + * requested descriptor</td></tr> + * + * <tr><td>SET_DESCRIPTOR </td><td>Gadget Driver </td><td>Optional - + * not implemented by any of the existing Gadget Drivers.</td></tr> + * + * <tr><td>SET_CONFIGURATION </td><td>Gadget Driver </td><td>Disable + * all EPs and enable EPs for new configuration.</td></tr> + * + * <tr><td>GET_CONFIGURATION </td><td>Gadget Driver </td><td>Return + * the current configuration</td></tr> + * + * <tr><td>SET_INTERFACE </td><td>Gadget Driver </td><td>Disable all + * EPs and enable EPs for new configuration.</td></tr> + * + * <tr><td>GET_INTERFACE </td><td>Gadget Driver </td><td>Return the + * current interface.</td></tr> + * + * <tr><td>SYNC_FRAME </td><td>PCD </td><td>Display debug + * message.</td></tr> + * </table> + * + * When the SETUP Phase Done interrupt occurs, the PCD SETUP commands are + * processed by pcd_setup. Calling the Function Driver's setup function from + * pcd_setup processes the gadget SETUP commands. + */ +static inline void pcd_setup(dwc_otg_pcd_t *pcd) +{ + dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); + dwc_otg_dev_if_t *dev_if = core_if->dev_if; + struct usb_ctrlrequest ctrl = pcd->setup_pkt->req; + dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; + + deptsiz0_data_t doeptsize0 = { .d32 = 0}; + +#ifdef DEBUG_EP0 + DWC_DEBUGPL(DBG_PCD, "SETUP %02x.%02x v%04x i%04x l%04x\n", + ctrl.bRequestType, ctrl.bRequest, + ctrl.wValue, ctrl.wIndex, ctrl.wLength); +#endif + + doeptsize0.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doeptsiz); + + /** @todo handle > 1 setup packet , assert error for now */ + + if (core_if->dma_enable && core_if->dma_desc_enable == 0 && (doeptsize0.b.supcnt < 2)) { + DWC_ERROR ("\n\n----------- CANNOT handle > 1 setup packet in DMA mode\n\n"); + } + + /* Clean up the request queue */ + dwc_otg_request_nuke(ep0); + ep0->stopped = 0; + + if (ctrl.bRequestType & USB_DIR_IN) { + ep0->dwc_ep.is_in = 1; + pcd->ep0state = EP0_IN_DATA_PHASE; + } + else { + ep0->dwc_ep.is_in = 0; + pcd->ep0state = EP0_OUT_DATA_PHASE; + } + + if(ctrl.wLength == 0) { + ep0->dwc_ep.is_in = 1; + pcd->ep0state = EP0_IN_STATUS_PHASE; + } + + if ((ctrl.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD) { + /* handle non-standard (class/vendor) requests in the gadget driver */ + do_gadget_setup(pcd, &ctrl); + return; + } + + /** @todo NGS: Handle bad setup packet? */ + +/////////////////////////////////////////// +//// --- Standard Request handling --- //// + + switch (ctrl.bRequest) { + case USB_REQ_GET_STATUS: + do_get_status(pcd); + break; + + case USB_REQ_CLEAR_FEATURE: + do_clear_feature(pcd); + break; + + case USB_REQ_SET_FEATURE: + do_set_feature(pcd); + break; + + case USB_REQ_SET_ADDRESS: + do_set_address(pcd); + break; + + case USB_REQ_SET_INTERFACE: + case USB_REQ_SET_CONFIGURATION: +// _pcd->request_config = 1; /* Configuration changed */ + do_gadget_setup(pcd, &ctrl); + break; + + case USB_REQ_SYNCH_FRAME: + do_gadget_setup(pcd, &ctrl); + break; + + default: + /* Call the Gadget Driver's setup functions */ + do_gadget_setup(pcd, &ctrl); + break; + } +} + +/** + * This function completes the ep0 control transfer. + */ +static int32_t ep0_complete_request(dwc_otg_pcd_ep_t *ep) +{ + dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd); + dwc_otg_dev_if_t *dev_if = core_if->dev_if; + dwc_otg_dev_in_ep_regs_t *in_ep_regs = + dev_if->in_ep_regs[ep->dwc_ep.num]; +#ifdef DEBUG_EP0 + dwc_otg_dev_out_ep_regs_t *out_ep_regs = + dev_if->out_ep_regs[ep->dwc_ep.num]; +#endif + deptsiz0_data_t deptsiz; + desc_sts_data_t desc_sts; + dwc_otg_pcd_request_t *req; + int is_last = 0; + dwc_otg_pcd_t *pcd = ep->pcd; + + //DWC_DEBUGPL(DBG_PCDV, "%s() %s\n", __func__, _ep->ep.name); + + if (pcd->ep0_pending && list_empty(&ep->queue)) { + if (ep->dwc_ep.is_in) { +#ifdef DEBUG_EP0 + DWC_DEBUGPL(DBG_PCDV, "Do setup OUT status phase\n"); +#endif + do_setup_out_status_phase(pcd); + } + else { +#ifdef DEBUG_EP0 + DWC_DEBUGPL(DBG_PCDV, "Do setup IN status phase\n"); +#endif + do_setup_in_status_phase(pcd); + } + pcd->ep0_pending = 0; + return 1; + } + + if (list_empty(&ep->queue)) { + return 0; + } + req = list_entry(ep->queue.next, dwc_otg_pcd_request_t, queue); + + + if (pcd->ep0state == EP0_OUT_STATUS_PHASE || pcd->ep0state == EP0_IN_STATUS_PHASE) { + is_last = 1; + } + else if (ep->dwc_ep.is_in) { + deptsiz.d32 = dwc_read_reg32(&in_ep_regs->dieptsiz); + if(core_if->dma_desc_enable != 0) + desc_sts.d32 = readl(dev_if->in_desc_addr); +#ifdef DEBUG_EP0 + DWC_DEBUGPL(DBG_PCDV, "%s len=%d xfersize=%d pktcnt=%d\n", + ep->ep.name, ep->dwc_ep.xfer_len, + deptsiz.b.xfersize, deptsiz.b.pktcnt); +#endif + + if (((core_if->dma_desc_enable == 0) && (deptsiz.b.xfersize == 0)) || + ((core_if->dma_desc_enable != 0) && (desc_sts.b.bytes == 0))) { + req->req.actual = ep->dwc_ep.xfer_count; + /* Is a Zero Len Packet needed? */ + if (req->req.zero) { +#ifdef DEBUG_EP0 + DWC_DEBUGPL(DBG_PCD, "Setup Rx ZLP\n"); +#endif + req->req.zero = 0; + } + do_setup_out_status_phase(pcd); + } + } + else { + /* ep0-OUT */ +#ifdef DEBUG_EP0 + deptsiz.d32 = dwc_read_reg32(&out_ep_regs->doeptsiz); + DWC_DEBUGPL(DBG_PCDV, "%s len=%d xsize=%d pktcnt=%d\n", + ep->ep.name, ep->dwc_ep.xfer_len, + deptsiz.b.xfersize, + deptsiz.b.pktcnt); +#endif + req->req.actual = ep->dwc_ep.xfer_count; + /* Is a Zero Len Packet needed? */ + if (req->req.zero) { +#ifdef DEBUG_EP0 + DWC_DEBUGPL(DBG_PCDV, "Setup Tx ZLP\n"); +#endif + req->req.zero = 0; + } + if(core_if->dma_desc_enable == 0) + do_setup_in_status_phase(pcd); + } + + /* Complete the request */ + if (is_last) { + dwc_otg_request_done(ep, req, 0); + ep->dwc_ep.start_xfer_buff = 0; + ep->dwc_ep.xfer_buff = 0; + ep->dwc_ep.xfer_len = 0; + return 1; + } + return 0; +} + +/** + * This function completes the request for the EP. If there are + * additional requests for the EP in the queue they will be started. + */ +static void complete_ep(dwc_otg_pcd_ep_t *ep) +{ + dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd); + dwc_otg_dev_if_t *dev_if = core_if->dev_if; + dwc_otg_dev_in_ep_regs_t *in_ep_regs = + dev_if->in_ep_regs[ep->dwc_ep.num]; + deptsiz_data_t deptsiz; + desc_sts_data_t desc_sts; + dwc_otg_pcd_request_t *req = 0; + dwc_otg_dma_desc_t* dma_desc; + uint32_t byte_count = 0; + int is_last = 0; + int i; + + DWC_DEBUGPL(DBG_PCDV,"%s() %s-%s\n", __func__, ep->ep.name, + (ep->dwc_ep.is_in?"IN":"OUT")); + + /* Get any pending requests */ + if (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, dwc_otg_pcd_request_t, + queue); + if (!req) { + printk("complete_ep 0x%p, req = NULL!\n", ep); + return; + } + } + else { + printk("complete_ep 0x%p, ep->queue empty!\n", ep); + return; + } + DWC_DEBUGPL(DBG_PCD, "Requests %d\n", ep->pcd->request_pending); + + if (ep->dwc_ep.is_in) { + deptsiz.d32 = dwc_read_reg32(&in_ep_regs->dieptsiz); + + if (core_if->dma_enable) { + if(core_if->dma_desc_enable == 0) { + if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) { + byte_count = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; + + ep->dwc_ep.xfer_buff += byte_count; + ep->dwc_ep.dma_addr += byte_count; + ep->dwc_ep.xfer_count += byte_count; + + DWC_DEBUGPL(DBG_PCDV, "%s len=%d xfersize=%d pktcnt=%d\n", + ep->ep.name, ep->dwc_ep.xfer_len, + deptsiz.b.xfersize, deptsiz.b.pktcnt); + + + if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) { + dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep); + } else if(ep->dwc_ep.sent_zlp) { + /* + * This fragment of code should initiate 0 + * length trasfer in case if it is queued + * a trasfer with size divisible to EPs max + * packet size and with usb_request zero field + * is set, which means that after data is transfered, + * it is also should be transfered + * a 0 length packet at the end. For Slave and + * Buffer DMA modes in this case SW has + * to initiate 2 transfers one with transfer size, + * and the second with 0 size. For Desriptor + * DMA mode SW is able to initiate a transfer, + * which will handle all the packets including + * the last 0 legth. + */ + ep->dwc_ep.sent_zlp = 0; + dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep); + } else { + is_last = 1; + } + } else { + DWC_WARN("Incomplete transfer (%s-%s [siz=%d pkt=%d])\n", + ep->ep.name, (ep->dwc_ep.is_in?"IN":"OUT"), + deptsiz.b.xfersize, deptsiz.b.pktcnt); + } + } else { + dma_desc = ep->dwc_ep.desc_addr; + byte_count = 0; + ep->dwc_ep.sent_zlp = 0; + + for(i = 0; i < ep->dwc_ep.desc_cnt; ++i) { + desc_sts.d32 = readl(dma_desc); + byte_count += desc_sts.b.bytes; + dma_desc++; + } + + if(byte_count == 0) { + ep->dwc_ep.xfer_count = ep->dwc_ep.total_len; + is_last = 1; + } else { + DWC_WARN("Incomplete transfer\n"); + } + } + } else { + if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) { + /* Check if the whole transfer was completed, + * if no, setup transfer for next portion of data + */ + DWC_DEBUGPL(DBG_PCDV, "%s len=%d xfersize=%d pktcnt=%d\n", + ep->ep.name, ep->dwc_ep.xfer_len, + deptsiz.b.xfersize, deptsiz.b.pktcnt); + if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) { + dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep); + } else if(ep->dwc_ep.sent_zlp) { + /* + * This fragment of code should initiate 0 + * length trasfer in case if it is queued + * a trasfer with size divisible to EPs max + * packet size and with usb_request zero field + * is set, which means that after data is transfered, + * it is also should be transfered + * a 0 length packet at the end. For Slave and + * Buffer DMA modes in this case SW has + * to initiate 2 transfers one with transfer size, + * and the second with 0 size. For Desriptor + * DMA mode SW is able to initiate a transfer, + * which will handle all the packets including + * the last 0 legth. + */ + ep->dwc_ep.sent_zlp = 0; + dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep); + } else { + is_last = 1; + } + } + else { + DWC_WARN("Incomplete transfer (%s-%s [siz=%d pkt=%d])\n", + ep->ep.name, (ep->dwc_ep.is_in?"IN":"OUT"), + deptsiz.b.xfersize, deptsiz.b.pktcnt); + } + } + } else { + dwc_otg_dev_out_ep_regs_t *out_ep_regs = + dev_if->out_ep_regs[ep->dwc_ep.num]; + desc_sts.d32 = 0; + if(core_if->dma_enable) { + if(core_if->dma_desc_enable) { + dma_desc = ep->dwc_ep.desc_addr; + byte_count = 0; + ep->dwc_ep.sent_zlp = 0; + for(i = 0; i < ep->dwc_ep.desc_cnt; ++i) { + desc_sts.d32 = readl(dma_desc); + byte_count += desc_sts.b.bytes; + dma_desc++; + } + + ep->dwc_ep.xfer_count = ep->dwc_ep.total_len + - byte_count + ((4 - (ep->dwc_ep.total_len & 0x3)) & 0x3); + is_last = 1; + } else { + deptsiz.d32 = 0; + deptsiz.d32 = dwc_read_reg32(&out_ep_regs->doeptsiz); + + byte_count = (ep->dwc_ep.xfer_len - + ep->dwc_ep.xfer_count - deptsiz.b.xfersize); + ep->dwc_ep.xfer_buff += byte_count; + ep->dwc_ep.dma_addr += byte_count; + ep->dwc_ep.xfer_count += byte_count; + + /* Check if the whole transfer was completed, + * if no, setup transfer for next portion of data + */ + if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) { + dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep); + } + else if(ep->dwc_ep.sent_zlp) { + /* + * This fragment of code should initiate 0 + * length trasfer in case if it is queued + * a trasfer with size divisible to EPs max + * packet size and with usb_request zero field + * is set, which means that after data is transfered, + * it is also should be transfered + * a 0 length packet at the end. For Slave and + * Buffer DMA modes in this case SW has + * to initiate 2 transfers one with transfer size, + * and the second with 0 size. For Desriptor + * DMA mode SW is able to initiate a transfer, + * which will handle all the packets including + * the last 0 legth. + */ + ep->dwc_ep.sent_zlp = 0; + dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep); + } else { + is_last = 1; + } + } + } else { + /* Check if the whole transfer was completed, + * if no, setup transfer for next portion of data + */ + if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) { + dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep); + } + else if(ep->dwc_ep.sent_zlp) { + /* + * This fragment of code should initiate 0 + * length trasfer in case if it is queued + * a trasfer with size divisible to EPs max + * packet size and with usb_request zero field + * is set, which means that after data is transfered, + * it is also should be transfered + * a 0 length packet at the end. For Slave and + * Buffer DMA modes in this case SW has + * to initiate 2 transfers one with transfer size, + * and the second with 0 size. For Desriptor + * DMA mode SW is able to initiate a transfer, + * which will handle all the packets including + * the last 0 legth. + */ + ep->dwc_ep.sent_zlp = 0; + dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep); + } else { + is_last = 1; + } + } + +#ifdef DEBUG + + DWC_DEBUGPL(DBG_PCDV, "addr %p, %s len=%d cnt=%d xsize=%d pktcnt=%d\n", + &out_ep_regs->doeptsiz, ep->ep.name, ep->dwc_ep.xfer_len, + ep->dwc_ep.xfer_count, + deptsiz.b.xfersize, + deptsiz.b.pktcnt); +#endif + } + + /* Complete the request */ + if (is_last) { + req->req.actual = ep->dwc_ep.xfer_count; + + dwc_otg_request_done(ep, req, 0); + + ep->dwc_ep.start_xfer_buff = 0; + ep->dwc_ep.xfer_buff = 0; + ep->dwc_ep.xfer_len = 0; + + /* If there is a request in the queue start it.*/ + start_next_request(ep); + } +} + + +#ifdef DWC_EN_ISOC + +/** + * This function BNA interrupt for Isochronous EPs + * + */ +static void dwc_otg_pcd_handle_iso_bna(dwc_otg_pcd_ep_t *ep) +{ + dwc_ep_t *dwc_ep = &ep->dwc_ep; + volatile uint32_t *addr; + depctl_data_t depctl = {.d32 = 0}; + dwc_otg_pcd_t *pcd = ep->pcd; + dwc_otg_dma_desc_t *dma_desc; + int i; + + dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * (dwc_ep->proc_buf_num); + + if(dwc_ep->is_in) { + desc_sts_data_t sts = {.d32 = 0}; + for(i = 0;i < dwc_ep->desc_cnt; ++i, ++dma_desc) + { + sts.d32 = readl(&dma_desc->status); + sts.b_iso_in.bs = BS_HOST_READY; + writel(sts.d32,&dma_desc->status); + } + } + else { + desc_sts_data_t sts = {.d32 = 0}; + for(i = 0;i < dwc_ep->desc_cnt; ++i, ++dma_desc) + { + sts.d32 = readl(&dma_desc->status); + sts.b_iso_out.bs = BS_HOST_READY; + writel(sts.d32,&dma_desc->status); + } + } + + if(dwc_ep->is_in == 0){ + addr = &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep->num]->doepctl; + } + else{ + addr = &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl; + } + depctl.b.epena = 1; + dwc_modify_reg32(addr,depctl.d32,depctl.d32); +} + +/** + * This function sets latest iso packet information(non-PTI mode) + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to start the transfer on. + * + */ +void set_current_pkt_info(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) +{ + deptsiz_data_t deptsiz = { .d32 = 0 }; + dma_addr_t dma_addr; + uint32_t offset; + + if(ep->proc_buf_num) + dma_addr = ep->dma_addr1; + else + dma_addr = ep->dma_addr0; + + + if(ep->is_in) { + deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz); + offset = ep->data_per_frame; + } else { + deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz); + offset = ep->data_per_frame + (0x4 & (0x4 - (ep->data_per_frame & 0x3))); + } + + if(!deptsiz.b.xfersize) { + ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame; + ep->pkt_info[ep->cur_pkt].offset = ep->cur_pkt_dma_addr - dma_addr; + ep->pkt_info[ep->cur_pkt].status = 0; + } else { + ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame; + ep->pkt_info[ep->cur_pkt].offset = ep->cur_pkt_dma_addr - dma_addr; + ep->pkt_info[ep->cur_pkt].status = -ENODATA; + } + ep->cur_pkt_addr += offset; + ep->cur_pkt_dma_addr += offset; + ep->cur_pkt++; +} + +/** + * This function sets latest iso packet information(DDMA mode) + * + * @param core_if Programming view of DWC_otg controller. + * @param dwc_ep The EP to start the transfer on. + * + */ +static void set_ddma_iso_pkts_info(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep) +{ + dwc_otg_dma_desc_t* dma_desc; + desc_sts_data_t sts = {.d32 = 0}; + iso_pkt_info_t *iso_packet; + uint32_t data_per_desc; + uint32_t offset; + int i, j; + + iso_packet = dwc_ep->pkt_info; + + /** Reinit closed DMA Descriptors*/ + /** ISO OUT EP */ + if(dwc_ep->is_in == 0) { + dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num; + offset = 0; + + for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm) + { + for(j = 0; j < dwc_ep->pkt_per_frm; ++j) + { + data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? + dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; + data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; + + sts.d32 = readl(&dma_desc->status); + + /* Write status in iso_packet_decsriptor */ + iso_packet->status = sts.b_iso_out.rxsts + (sts.b_iso_out.bs^BS_DMA_DONE); + if(iso_packet->status) { + iso_packet->status = -ENODATA; + } + + /* Received data length */ + if(!sts.b_iso_out.rxbytes){ + iso_packet->length = data_per_desc - sts.b_iso_out.rxbytes; + } else { + iso_packet->length = data_per_desc - sts.b_iso_out.rxbytes + + (4 - dwc_ep->data_per_frame % 4); + } + + iso_packet->offset = offset; + + offset += data_per_desc; + dma_desc ++; + iso_packet ++; + } + } + + for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) + { + data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? + dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; + data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; + + sts.d32 = readl(&dma_desc->status); + + /* Write status in iso_packet_decsriptor */ + iso_packet->status = sts.b_iso_out.rxsts + (sts.b_iso_out.bs^BS_DMA_DONE); + if(iso_packet->status) { + iso_packet->status = -ENODATA; + } + + /* Received data length */ + iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_out.rxbytes; + + iso_packet->offset = offset; + + offset += data_per_desc; + iso_packet++; + dma_desc++; + } + + sts.d32 = readl(&dma_desc->status); + + /* Write status in iso_packet_decsriptor */ + iso_packet->status = sts.b_iso_out.rxsts + (sts.b_iso_out.bs^BS_DMA_DONE); + if(iso_packet->status) { + iso_packet->status = -ENODATA; + } + /* Received data length */ + if(!sts.b_iso_out.rxbytes){ + iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_out.rxbytes; + } else { + iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_out.rxbytes + + (4 - dwc_ep->data_per_frame % 4); + } + + iso_packet->offset = offset; + } + else /** ISO IN EP */ + { + dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num; + + for(i = 0; i < dwc_ep->desc_cnt - 1; i++) + { + sts.d32 = readl(&dma_desc->status); + + /* Write status in iso packet descriptor */ + iso_packet->status = sts.b_iso_in.txsts + (sts.b_iso_in.bs^BS_DMA_DONE); + if(iso_packet->status != 0) { + iso_packet->status = -ENODATA; + + } + /* Bytes has been transfered */ + iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_in.txbytes; + + dma_desc ++; + iso_packet++; + } + + sts.d32 = readl(&dma_desc->status); + while(sts.b_iso_in.bs == BS_DMA_BUSY) { + sts.d32 = readl(&dma_desc->status); + } + + /* Write status in iso packet descriptor ??? do be done with ERROR codes*/ + iso_packet->status = sts.b_iso_in.txsts + (sts.b_iso_in.bs^BS_DMA_DONE); + if(iso_packet->status != 0) { + iso_packet->status = -ENODATA; + } + + /* Bytes has been transfered */ + iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_in.txbytes; + } +} + +/** + * This function reinitialize DMA Descriptors for Isochronous transfer + * + * @param core_if Programming view of DWC_otg controller. + * @param dwc_ep The EP to start the transfer on. + * + */ +static void reinit_ddma_iso_xfer(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep) +{ + int i, j; + dwc_otg_dma_desc_t* dma_desc; + dma_addr_t dma_ad; + volatile uint32_t *addr; + desc_sts_data_t sts = { .d32 =0 }; + uint32_t data_per_desc; + + if(dwc_ep->is_in == 0) { + addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl; + } + else { + addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl; + } + + + if(dwc_ep->proc_buf_num == 0) { + /** Buffer 0 descriptors setup */ + dma_ad = dwc_ep->dma_addr0; + } + else { + /** Buffer 1 descriptors setup */ + dma_ad = dwc_ep->dma_addr1; + } + + + /** Reinit closed DMA Descriptors*/ + /** ISO OUT EP */ + if(dwc_ep->is_in == 0) { + dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num; + + sts.b_iso_out.bs = BS_HOST_READY; + sts.b_iso_out.rxsts = 0; + sts.b_iso_out.l = 0; + sts.b_iso_out.sp = 0; + sts.b_iso_out.ioc = 0; + sts.b_iso_out.pid = 0; + sts.b_iso_out.framenum = 0; + + for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm) + { + for(j = 0; j < dwc_ep->pkt_per_frm; ++j) + { + data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? + dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; + data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; + sts.b_iso_out.rxbytes = data_per_desc; + writel((uint32_t)dma_ad, &dma_desc->buf); + writel(sts.d32, &dma_desc->status); + + (uint32_t)dma_ad += data_per_desc; + dma_desc ++; + } + } + + for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) + { + + data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? + dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; + data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; + sts.b_iso_out.rxbytes = data_per_desc; + + writel((uint32_t)dma_ad, &dma_desc->buf); + writel(sts.d32, &dma_desc->status); + + dma_desc++; + (uint32_t)dma_ad += data_per_desc; + } + + sts.b_iso_out.ioc = 1; + sts.b_iso_out.l = dwc_ep->proc_buf_num; + + data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? + dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; + data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; + sts.b_iso_out.rxbytes = data_per_desc; + + writel((uint32_t)dma_ad, &dma_desc->buf); + writel(sts.d32, &dma_desc->status); + } + else /** ISO IN EP */ + { + dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num; + + sts.b_iso_in.bs = BS_HOST_READY; + sts.b_iso_in.txsts = 0; + sts.b_iso_in.sp = 0; + sts.b_iso_in.ioc = 0; + sts.b_iso_in.pid = dwc_ep->pkt_per_frm; + sts.b_iso_in.framenum = dwc_ep->next_frame; + sts.b_iso_in.txbytes = dwc_ep->data_per_frame; + sts.b_iso_in.l = 0; + + for(i = 0; i < dwc_ep->desc_cnt - 1; i++) + { + writel((uint32_t)dma_ad, &dma_desc->buf); + writel(sts.d32, &dma_desc->status); + + sts.b_iso_in.framenum += dwc_ep->bInterval; + (uint32_t)dma_ad += dwc_ep->data_per_frame; + dma_desc ++; + } + + sts.b_iso_in.ioc = 1; + sts.b_iso_in.l = dwc_ep->proc_buf_num; + + writel((uint32_t)dma_ad, &dma_desc->buf); + writel(sts.d32, &dma_desc->status); + + dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval * 1; + } + dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1; +} + + +/** + * This function is to handle Iso EP transfer complete interrupt + * in case Iso out packet was dropped + * + * @param core_if Programming view of DWC_otg controller. + * @param dwc_ep The EP for wihich transfer complete was asserted + * + */ +static uint32_t handle_iso_out_pkt_dropped(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep) +{ + uint32_t dma_addr; + uint32_t drp_pkt; + uint32_t drp_pkt_cnt; + deptsiz_data_t deptsiz = { .d32 = 0 }; + depctl_data_t depctl = { .d32 = 0 }; + int i; + + deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz); + + drp_pkt = dwc_ep->pkt_cnt - deptsiz.b.pktcnt; + drp_pkt_cnt = dwc_ep->pkt_per_frm - (drp_pkt % dwc_ep->pkt_per_frm); + + /* Setting dropped packets status */ + for(i = 0; i < drp_pkt_cnt; ++i) { + dwc_ep->pkt_info[drp_pkt].status = -ENODATA; + drp_pkt ++; + deptsiz.b.pktcnt--; + } + + + if(deptsiz.b.pktcnt > 0) { + deptsiz.b.xfersize = dwc_ep->xfer_len - (dwc_ep->pkt_cnt - deptsiz.b.pktcnt) * dwc_ep->maxpacket; + } else { + deptsiz.b.xfersize = 0; + deptsiz.b.pktcnt = 0; + } + + dwc_write_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz, deptsiz.d32); + + if(deptsiz.b.pktcnt > 0) { + if(dwc_ep->proc_buf_num) { + dma_addr = dwc_ep->dma_addr1 + dwc_ep->xfer_len - deptsiz.b.xfersize; + } else { + dma_addr = dwc_ep->dma_addr0 + dwc_ep->xfer_len - deptsiz.b.xfersize;; + } + + dwc_write_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepdma, dma_addr); + + /** Re-enable endpoint, clear nak */ + depctl.d32 = 0; + depctl.b.epena = 1; + depctl.b.cnak = 1; + + dwc_modify_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl, + depctl.d32,depctl.d32); + return 0; + } else { + return 1; + } +} + +/** + * This function sets iso packets information(PTI mode) + * + * @param core_if Programming view of DWC_otg controller. + * @param ep The EP to start the transfer on. + * + */ +static uint32_t set_iso_pkts_info(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) +{ + int i, j; + dma_addr_t dma_ad; + iso_pkt_info_t *packet_info = ep->pkt_info; + uint32_t offset; + uint32_t frame_data; + deptsiz_data_t deptsiz; + + if(ep->proc_buf_num == 0) { + /** Buffer 0 descriptors setup */ + dma_ad = ep->dma_addr0; + } + else { + /** Buffer 1 descriptors setup */ + dma_ad = ep->dma_addr1; + } + + + if(ep->is_in) { + deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz); + } else { + deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz); + } + + if(!deptsiz.b.xfersize) { + offset = 0; + for(i = 0; i < ep->pkt_cnt; i += ep->pkt_per_frm) + { + frame_data = ep->data_per_frame; + for(j = 0; j < ep->pkt_per_frm; ++j) { + + /* Packet status - is not set as initially + * it is set to 0 and if packet was sent + successfully, status field will remain 0*/ + + + /* Bytes has been transfered */ + packet_info->length = (ep->maxpacket < frame_data) ? + ep->maxpacket : frame_data; + + /* Received packet offset */ + packet_info->offset = offset; + offset += packet_info->length; + frame_data -= packet_info->length; + + packet_info ++; + } + } + return 1; + } else { + /* This is a workaround for in case of Transfer Complete with + * PktDrpSts interrupts merging - in this case Transfer complete + * interrupt for Isoc Out Endpoint is asserted without PktDrpSts + * set and with DOEPTSIZ register non zero. Investigations showed, + * that this happens when Out packet is dropped, but because of + * interrupts merging during first interrupt handling PktDrpSts + * bit is cleared and for next merged interrupts it is not reset. + * In this case SW hadles the interrupt as if PktDrpSts bit is set. + */ + if(ep->is_in) { + return 1; + } else { + return handle_iso_out_pkt_dropped(core_if, ep); + } + } +} + +/** + * This function is to handle Iso EP transfer complete interrupt + * + * @param ep The EP for which transfer complete was asserted + * + */ +static void complete_iso_ep(dwc_otg_pcd_ep_t *ep) +{ + dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd); + dwc_ep_t *dwc_ep = &ep->dwc_ep; + uint8_t is_last = 0; + + if(core_if->dma_enable) { + if(core_if->dma_desc_enable) { + set_ddma_iso_pkts_info(core_if, dwc_ep); + reinit_ddma_iso_xfer(core_if, dwc_ep); + is_last = 1; + } else { + if(core_if->pti_enh_enable) { + if(set_iso_pkts_info(core_if, dwc_ep)) { + dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1; + dwc_otg_iso_ep_start_buf_transfer(core_if, dwc_ep); + is_last = 1; + } + } else { + set_current_pkt_info(core_if, dwc_ep); + if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { + is_last = 1; + dwc_ep->cur_pkt = 0; + dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1; + if(dwc_ep->proc_buf_num) { + dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1; + dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1; + } else { + dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0; + dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0; + } + + } + dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep); + } + } + } else { + set_current_pkt_info(core_if, dwc_ep); + if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { + is_last = 1; + dwc_ep->cur_pkt = 0; + dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1; + if(dwc_ep->proc_buf_num) { + dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1; + dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1; + } else { + dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0; + dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0; + } + + } + dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep); + } + if(is_last) + dwc_otg_iso_buffer_done(ep, ep->iso_req); +} + +#endif //DWC_EN_ISOC + + +/** + * This function handles EP0 Control transfers. + * + * The state of the control tranfers are tracked in + * <code>ep0state</code>. + */ +static void handle_ep0(dwc_otg_pcd_t *pcd) +{ + dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); + dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; + desc_sts_data_t desc_sts; + deptsiz0_data_t deptsiz; + uint32_t byte_count; + +#ifdef DEBUG_EP0 + DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__); + print_ep0_state(pcd); +#endif + + switch (pcd->ep0state) { + case EP0_DISCONNECT: + break; + + case EP0_IDLE: + pcd->request_config = 0; + + pcd_setup(pcd); + break; + + case EP0_IN_DATA_PHASE: +#ifdef DEBUG_EP0 + DWC_DEBUGPL(DBG_PCD, "DATA_IN EP%d-%s: type=%d, mps=%d\n", + ep0->dwc_ep.num, (ep0->dwc_ep.is_in ?"IN":"OUT"), + ep0->dwc_ep.type, ep0->dwc_ep.maxpacket); +#endif + + if (core_if->dma_enable != 0) { + /* + * For EP0 we can only program 1 packet at a time so we + * need to do the make calculations after each complete. + * Call write_packet to make the calculations, as in + * slave mode, and use those values to determine if we + * can complete. + */ + if(core_if->dma_desc_enable == 0) { + deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[0]->dieptsiz); + byte_count = ep0->dwc_ep.xfer_len - deptsiz.b.xfersize; + } + else { + desc_sts.d32 = readl(core_if->dev_if->in_desc_addr); + byte_count = ep0->dwc_ep.xfer_len - desc_sts.b.bytes; + } + ep0->dwc_ep.xfer_count += byte_count; + ep0->dwc_ep.xfer_buff += byte_count; + ep0->dwc_ep.dma_addr += byte_count; + } + if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) { + dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep); + DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n"); + } + else if(ep0->dwc_ep.sent_zlp) { + dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep); + ep0->dwc_ep.sent_zlp = 0; + DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n"); + } + else { + ep0_complete_request(ep0); + DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n"); + } + break; + case EP0_OUT_DATA_PHASE: +#ifdef DEBUG_EP0 + DWC_DEBUGPL(DBG_PCD, "DATA_OUT EP%d-%s: type=%d, mps=%d\n", + ep0->dwc_ep.num, (ep0->dwc_ep.is_in ?"IN":"OUT"), + ep0->dwc_ep.type, ep0->dwc_ep.maxpacket); +#endif + if (core_if->dma_enable != 0) { + if(core_if->dma_desc_enable == 0) { + deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[0]->doeptsiz); + byte_count = ep0->dwc_ep.maxpacket - deptsiz.b.xfersize; + } + else { + desc_sts.d32 = readl(core_if->dev_if->out_desc_addr); + byte_count = ep0->dwc_ep.maxpacket - desc_sts.b.bytes; + } + ep0->dwc_ep.xfer_count += byte_count; + ep0->dwc_ep.xfer_buff += byte_count; + ep0->dwc_ep.dma_addr += byte_count; + } + if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) { + dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep); + DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n"); + } + else if(ep0->dwc_ep.sent_zlp) { + dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep); + ep0->dwc_ep.sent_zlp = 0; + DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n"); + } + else { + ep0_complete_request(ep0); + DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n"); + } + break; + + + case EP0_IN_STATUS_PHASE: + case EP0_OUT_STATUS_PHASE: + DWC_DEBUGPL(DBG_PCD, "CASE: EP0_STATUS\n"); + ep0_complete_request(ep0); + pcd->ep0state = EP0_IDLE; + ep0->stopped = 1; + ep0->dwc_ep.is_in = 0; /* OUT for next SETUP */ + + /* Prepare for more SETUP Packets */ + if(core_if->dma_enable) { + ep0_out_start(core_if, pcd); + } + break; + + case EP0_STALL: + DWC_ERROR("EP0 STALLed, should not get here pcd_setup()\n"); + break; + } +#ifdef DEBUG_EP0 + print_ep0_state(pcd); +#endif +} + + +/** + * Restart transfer + */ +static void restart_transfer(dwc_otg_pcd_t *pcd, const uint32_t epnum) +{ + dwc_otg_core_if_t *core_if; + dwc_otg_dev_if_t *dev_if; + deptsiz_data_t dieptsiz = {.d32=0}; + dwc_otg_pcd_ep_t *ep; + + ep = get_in_ep(pcd, epnum); + +#ifdef DWC_EN_ISOC + if(ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { + return; + } +#endif /* DWC_EN_ISOC */ + + core_if = GET_CORE_IF(pcd); + dev_if = core_if->dev_if; + + dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dieptsiz); + + DWC_DEBUGPL(DBG_PCD,"xfer_buff=%p xfer_count=%0x xfer_len=%0x" + " stopped=%d\n", ep->dwc_ep.xfer_buff, + ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len , + ep->stopped); + /* + * If xfersize is 0 and pktcnt in not 0, resend the last packet. + */ + if (dieptsiz.b.pktcnt && dieptsiz.b.xfersize == 0 && + ep->dwc_ep.start_xfer_buff != 0) { + if (ep->dwc_ep.total_len <= ep->dwc_ep.maxpacket) { + ep->dwc_ep.xfer_count = 0; + ep->dwc_ep.xfer_buff = ep->dwc_ep.start_xfer_buff; + ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count; + } + else { + ep->dwc_ep.xfer_count -= ep->dwc_ep.maxpacket; + /* convert packet size to dwords. */ + ep->dwc_ep.xfer_buff -= ep->dwc_ep.maxpacket; + ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count; + } + ep->stopped = 0; + DWC_DEBUGPL(DBG_PCD,"xfer_buff=%p xfer_count=%0x " + "xfer_len=%0x stopped=%d\n", + ep->dwc_ep.xfer_buff, + ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len , + ep->stopped + ); + if (epnum == 0) { + dwc_otg_ep0_start_transfer(core_if, &ep->dwc_ep); + } + else { + dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep); + } + } +} + + +/** + * handle the IN EP disable interrupt. + */ +static inline void handle_in_ep_disable_intr(dwc_otg_pcd_t *pcd, + const uint32_t epnum) +{ + dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); + dwc_otg_dev_if_t *dev_if = core_if->dev_if; + deptsiz_data_t dieptsiz = {.d32=0}; + dctl_data_t dctl = {.d32=0}; + dwc_otg_pcd_ep_t *ep; + dwc_ep_t *dwc_ep; + + ep = get_in_ep(pcd, epnum); + dwc_ep = &ep->dwc_ep; + + if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { + dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num); + return; + } + + DWC_DEBUGPL(DBG_PCD,"diepctl%d=%0x\n", epnum, + dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl)); + dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dieptsiz); + + DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n", + dieptsiz.b.pktcnt, + dieptsiz.b.xfersize); + + if (ep->stopped) { + /* Flush the Tx FIFO */ + dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num); + /* Clear the Global IN NP NAK */ + dctl.d32 = 0; + dctl.b.cgnpinnak = 1; + dwc_modify_reg32(&dev_if->dev_global_regs->dctl, + dctl.d32, 0); + /* Restart the transaction */ + if (dieptsiz.b.pktcnt != 0 || + dieptsiz.b.xfersize != 0) { + restart_transfer(pcd, epnum); + } + } + else { + /* Restart the transaction */ + if (dieptsiz.b.pktcnt != 0 || + dieptsiz.b.xfersize != 0) { + restart_transfer(pcd, epnum); + } + DWC_DEBUGPL(DBG_ANY, "STOPPED!!!\n"); + } +} + +/** + * Handler for the IN EP timeout handshake interrupt. + */ +static inline void handle_in_ep_timeout_intr(dwc_otg_pcd_t *pcd, + const uint32_t epnum) +{ + dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); + dwc_otg_dev_if_t *dev_if = core_if->dev_if; + +#ifdef DEBUG + deptsiz_data_t dieptsiz = {.d32=0}; + uint32_t num = 0; +#endif + dctl_data_t dctl = {.d32=0}; + dwc_otg_pcd_ep_t *ep; + + gintmsk_data_t intr_mask = {.d32 = 0}; + + ep = get_in_ep(pcd, epnum); + + /* Disable the NP Tx Fifo Empty Interrrupt */ + if (!core_if->dma_enable) { + intr_mask.b.nptxfempty = 1; + dwc_modify_reg32(&core_if->core_global_regs->gintmsk, intr_mask.d32, 0); + } + /** @todo NGS Check EP type. + * Implement for Periodic EPs */ + /* + * Non-periodic EP + */ + /* Enable the Global IN NAK Effective Interrupt */ + intr_mask.b.ginnakeff = 1; + dwc_modify_reg32(&core_if->core_global_regs->gintmsk, + 0, intr_mask.d32); + + /* Set Global IN NAK */ + dctl.b.sgnpinnak = 1; + dwc_modify_reg32(&dev_if->dev_global_regs->dctl, + dctl.d32, dctl.d32); + + ep->stopped = 1; + +#ifdef DEBUG + dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[num]->dieptsiz); + DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n", + dieptsiz.b.pktcnt, + dieptsiz.b.xfersize); +#endif + +#ifdef DISABLE_PERIODIC_EP + /* + * Set the NAK bit for this EP to + * start the disable process. + */ + diepctl.d32 = 0; + diepctl.b.snak = 1; + dwc_modify_reg32(&dev_if->in_ep_regs[num]->diepctl, diepctl.d32, diepctl.d32); + ep->disabling = 1; + ep->stopped = 1; +#endif +} + +/** + * Handler for the IN EP NAK interrupt. + */ +static inline int32_t handle_in_ep_nak_intr(dwc_otg_pcd_t *pcd, + const uint32_t epnum) +{ + /** @todo implement ISR */ + dwc_otg_core_if_t* core_if; + diepmsk_data_t intr_mask = { .d32 = 0}; + + DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "IN EP NAK"); + core_if = GET_CORE_IF(pcd); + intr_mask.b.nak = 1; + + if(core_if->multiproc_int_enable) { + dwc_modify_reg32(&core_if->dev_if->dev_global_regs->diepeachintmsk[epnum], + intr_mask.d32, 0); + } else { + dwc_modify_reg32(&core_if->dev_if->dev_global_regs->diepmsk, + intr_mask.d32, 0); + } + + return 1; +} + +/** + * Handler for the OUT EP Babble interrupt. + */ +static inline int32_t handle_out_ep_babble_intr(dwc_otg_pcd_t *pcd, + const uint32_t epnum) +{ + /** @todo implement ISR */ + dwc_otg_core_if_t* core_if; + doepmsk_data_t intr_mask = { .d32 = 0}; + + DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "OUT EP Babble"); + core_if = GET_CORE_IF(pcd); + intr_mask.b.babble = 1; + + if(core_if->multiproc_int_enable) { + dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[epnum], + intr_mask.d32, 0); + } else { + dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk, + intr_mask.d32, 0); + } + + return 1; +} + +/** + * Handler for the OUT EP NAK interrupt. + */ +static inline int32_t handle_out_ep_nak_intr(dwc_otg_pcd_t *pcd, + const uint32_t epnum) +{ + /** @todo implement ISR */ + dwc_otg_core_if_t* core_if; + doepmsk_data_t intr_mask = { .d32 = 0}; + + DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "OUT EP NAK"); + core_if = GET_CORE_IF(pcd); + intr_mask.b.nak = 1; + + if(core_if->multiproc_int_enable) { + dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[epnum], + intr_mask.d32, 0); + } else { + dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk, + intr_mask.d32, 0); + } + + return 1; +} + +/** + * Handler for the OUT EP NYET interrupt. + */ +static inline int32_t handle_out_ep_nyet_intr(dwc_otg_pcd_t *pcd, + const uint32_t epnum) +{ + /** @todo implement ISR */ + dwc_otg_core_if_t* core_if; + doepmsk_data_t intr_mask = { .d32 = 0}; + + DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "OUT EP NYET"); + core_if = GET_CORE_IF(pcd); + intr_mask.b.nyet = 1; + + if(core_if->multiproc_int_enable) { + dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[epnum], + intr_mask.d32, 0); + } else { + dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk, + intr_mask.d32, 0); + } + + return 1; +} + +/** + * This interrupt indicates that an IN EP has a pending Interrupt. + * The sequence for handling the IN EP interrupt is shown below: + * -# Read the Device All Endpoint Interrupt register + * -# Repeat the following for each IN EP interrupt bit set (from + * LSB to MSB). + * -# Read the Device Endpoint Interrupt (DIEPINTn) register + * -# If "Transfer Complete" call the request complete function + * -# If "Endpoint Disabled" complete the EP disable procedure. + * -# If "AHB Error Interrupt" log error + * -# If "Time-out Handshake" log error + * -# If "IN Token Received when TxFIFO Empty" write packet to Tx + * FIFO. + * -# If "IN Token EP Mismatch" (disable, this is handled by EP + * Mismatch Interrupt) + */ +static int32_t dwc_otg_pcd_handle_in_ep_intr(dwc_otg_pcd_t *pcd) +{ +#define CLEAR_IN_EP_INTR(__core_if,__epnum,__intr) \ +do { \ + diepint_data_t diepint = {.d32=0}; \ + diepint.b.__intr = 1; \ + dwc_write_reg32(&__core_if->dev_if->in_ep_regs[__epnum]->diepint, \ + diepint.d32); \ +} while (0) + + dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); + dwc_otg_dev_if_t *dev_if = core_if->dev_if; + diepint_data_t diepint = {.d32=0}; + dctl_data_t dctl = {.d32=0}; + depctl_data_t depctl = {.d32=0}; + uint32_t ep_intr; + uint32_t epnum = 0; + dwc_otg_pcd_ep_t *ep; + dwc_ep_t *dwc_ep; + gintmsk_data_t intr_mask = {.d32 = 0}; + + + + DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd); + + /* Read in the device interrupt bits */ + ep_intr = dwc_otg_read_dev_all_in_ep_intr(core_if); + + /* Service the Device IN interrupts for each endpoint */ + while(ep_intr) { + if (ep_intr&0x1) { + uint32_t empty_msk; + /* Get EP pointer */ + ep = get_in_ep(pcd, epnum); + dwc_ep = &ep->dwc_ep; + + depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl); + empty_msk = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk); + + DWC_DEBUGPL(DBG_PCDV, + "IN EP INTERRUPT - %d\nepmty_msk - %8x diepctl - %8x\n", + epnum, + empty_msk, + depctl.d32); + + DWC_DEBUGPL(DBG_PCD, + "EP%d-%s: type=%d, mps=%d\n", + dwc_ep->num, (dwc_ep->is_in ?"IN":"OUT"), + dwc_ep->type, dwc_ep->maxpacket); + + diepint.d32 = dwc_otg_read_dev_in_ep_intr(core_if, dwc_ep); + + DWC_DEBUGPL(DBG_PCDV, "EP %d Interrupt Register - 0x%x\n", epnum, diepint.d32); + /* Transfer complete */ + if (diepint.b.xfercompl) { + /* Disable the NP Tx FIFO Empty + * Interrrupt */ + if(core_if->en_multiple_tx_fifo == 0) { + intr_mask.b.nptxfempty = 1; + dwc_modify_reg32(&core_if->core_global_regs->gintmsk, intr_mask.d32, 0); + } + else { + /* Disable the Tx FIFO Empty Interrupt for this EP */ + uint32_t fifoemptymsk = 0x1 << dwc_ep->num; + dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk, + fifoemptymsk, 0); + } + /* Clear the bit in DIEPINTn for this interrupt */ + CLEAR_IN_EP_INTR(core_if,epnum,xfercompl); + + /* Complete the transfer */ + if (epnum == 0) { + handle_ep0(pcd); + } +#ifdef DWC_EN_ISOC + else if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { + if(!ep->stopped) + complete_iso_ep(ep); + } +#endif //DWC_EN_ISOC + else { + + complete_ep(ep); + } + } + /* Endpoint disable */ + if (diepint.b.epdisabled) { + DWC_DEBUGPL(DBG_ANY,"EP%d IN disabled\n", epnum); + handle_in_ep_disable_intr(pcd, epnum); + + /* Clear the bit in DIEPINTn for this interrupt */ + CLEAR_IN_EP_INTR(core_if,epnum,epdisabled); + } + /* AHB Error */ + if (diepint.b.ahberr) { + DWC_DEBUGPL(DBG_ANY,"EP%d IN AHB Error\n", epnum); + /* Clear the bit in DIEPINTn for this interrupt */ + CLEAR_IN_EP_INTR(core_if,epnum,ahberr); + } + /* TimeOUT Handshake (non-ISOC IN EPs) */ + if (diepint.b.timeout) { + DWC_DEBUGPL(DBG_ANY,"EP%d IN Time-out\n", epnum); + handle_in_ep_timeout_intr(pcd, epnum); + + CLEAR_IN_EP_INTR(core_if,epnum,timeout); + } + /** IN Token received with TxF Empty */ + if (diepint.b.intktxfemp) { + DWC_DEBUGPL(DBG_ANY,"EP%d IN TKN TxFifo Empty\n", + epnum); + if (!ep->stopped && epnum != 0) { + + diepmsk_data_t diepmsk = { .d32 = 0}; + diepmsk.b.intktxfemp = 1; + + if(core_if->multiproc_int_enable) { + dwc_modify_reg32(&dev_if->dev_global_regs->diepeachintmsk[epnum], + diepmsk.d32, 0); + } else { + dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32, 0); + } + start_next_request(ep); + } + else if(core_if->dma_desc_enable && epnum == 0 && + pcd->ep0state == EP0_OUT_STATUS_PHASE) { + // EP0 IN set STALL + depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl); + + /* set the disable and stall bits */ + if (depctl.b.epena) { + depctl.b.epdis = 1; + } + depctl.b.stall = 1; + dwc_write_reg32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32); + } + CLEAR_IN_EP_INTR(core_if,epnum,intktxfemp); + } + /** IN Token Received with EP mismatch */ + if (diepint.b.intknepmis) { + DWC_DEBUGPL(DBG_ANY,"EP%d IN TKN EP Mismatch\n", epnum); + CLEAR_IN_EP_INTR(core_if,epnum,intknepmis); + } + /** IN Endpoint NAK Effective */ + if (diepint.b.inepnakeff) { + DWC_DEBUGPL(DBG_ANY,"EP%d IN EP NAK Effective\n", epnum); + /* Periodic EP */ + if (ep->disabling) { + depctl.d32 = 0; + depctl.b.snak = 1; + depctl.b.epdis = 1; + dwc_modify_reg32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32, depctl.d32); + } + CLEAR_IN_EP_INTR(core_if,epnum,inepnakeff); + + } + + /** IN EP Tx FIFO Empty Intr */ + if (diepint.b.emptyintr) { + DWC_DEBUGPL(DBG_ANY,"EP%d Tx FIFO Empty Intr \n", epnum); + write_empty_tx_fifo(pcd, epnum); + + CLEAR_IN_EP_INTR(core_if,epnum,emptyintr); + + } + + /** IN EP BNA Intr */ + if (diepint.b.bna) { + CLEAR_IN_EP_INTR(core_if,epnum,bna); + if(core_if->dma_desc_enable) { +#ifdef DWC_EN_ISOC + if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { + /* + * This checking is performed to prevent first "false" BNA + * handling occuring right after reconnect + */ + if(dwc_ep->next_frame != 0xffffffff) + dwc_otg_pcd_handle_iso_bna(ep); + } + else +#endif //DWC_EN_ISOC + { + dctl.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dctl); + + /* If Global Continue on BNA is disabled - disable EP */ + if(!dctl.b.gcontbna) { + depctl.d32 = 0; + depctl.b.snak = 1; + depctl.b.epdis = 1; + dwc_modify_reg32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32, depctl.d32); + } else { + start_next_request(ep); + } + } + } + } + /* NAK Interrutp */ + if (diepint.b.nak) { + DWC_DEBUGPL(DBG_ANY,"EP%d IN NAK Interrupt\n", epnum); + handle_in_ep_nak_intr(pcd, epnum); + + CLEAR_IN_EP_INTR(core_if,epnum,nak); + } + } + epnum++; + ep_intr >>=1; + } + + return 1; +#undef CLEAR_IN_EP_INTR +} + +/** + * This interrupt indicates that an OUT EP has a pending Interrupt. + * The sequence for handling the OUT EP interrupt is shown below: + * -# Read the Device All Endpoint Interrupt register + * -# Repeat the following for each OUT EP interrupt bit set (from + * LSB to MSB). + * -# Read the Device Endpoint Interrupt (DOEPINTn) register + * -# If "Transfer Complete" call the request complete function + * -# If "Endpoint Disabled" complete the EP disable procedure. + * -# If "AHB Error Interrupt" log error + * -# If "Setup Phase Done" process Setup Packet (See Standard USB + * Command Processing) + */ +static int32_t dwc_otg_pcd_handle_out_ep_intr(dwc_otg_pcd_t *pcd) +{ +#define CLEAR_OUT_EP_INTR(__core_if,__epnum,__intr) \ +do { \ + doepint_data_t doepint = {.d32=0}; \ + doepint.b.__intr = 1; \ + dwc_write_reg32(&__core_if->dev_if->out_ep_regs[__epnum]->doepint, \ + doepint.d32); \ +} while (0) + + dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); + dwc_otg_dev_if_t *dev_if = core_if->dev_if; + uint32_t ep_intr; + doepint_data_t doepint = {.d32=0}; + dctl_data_t dctl = {.d32=0}; + depctl_data_t doepctl = {.d32=0}; + uint32_t epnum = 0; + dwc_otg_pcd_ep_t *ep; + dwc_ep_t *dwc_ep; + + DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__); + + /* Read in the device interrupt bits */ + ep_intr = dwc_otg_read_dev_all_out_ep_intr(core_if); + + while(ep_intr) { + if (ep_intr&0x1) { + /* Get EP pointer */ + ep = get_out_ep(pcd, epnum); + dwc_ep = &ep->dwc_ep; + +#ifdef VERBOSE + DWC_DEBUGPL(DBG_PCDV, + "EP%d-%s: type=%d, mps=%d\n", + dwc_ep->num, (dwc_ep->is_in ?"IN":"OUT"), + dwc_ep->type, dwc_ep->maxpacket); +#endif + doepint.d32 = dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep); + + /* Transfer complete */ + if (doepint.b.xfercompl) { + + if (epnum == 0) { + /* Clear the bit in DOEPINTn for this interrupt */ + CLEAR_OUT_EP_INTR(core_if,epnum,xfercompl); + if(core_if->dma_desc_enable == 0 || pcd->ep0state != EP0_IDLE) + handle_ep0(pcd); +#ifdef DWC_EN_ISOC + } else if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { + if (doepint.b.pktdrpsts == 0) { + /* Clear the bit in DOEPINTn for this interrupt */ + CLEAR_OUT_EP_INTR(core_if,epnum,xfercompl); + complete_iso_ep(ep); + } else { + + doepint_data_t doepint = {.d32=0}; + doepint.b.xfercompl = 1; + doepint.b.pktdrpsts = 1; + dwc_write_reg32(&core_if->dev_if->out_ep_regs[epnum]->doepint, + doepint.d32); + if(handle_iso_out_pkt_dropped(core_if,dwc_ep)) { + complete_iso_ep(ep); + } + } +#endif //DWC_EN_ISOC + } else { + /* Clear the bit in DOEPINTn for this interrupt */ + CLEAR_OUT_EP_INTR(core_if,epnum,xfercompl); + complete_ep(ep); + } + + } + + /* Endpoint disable */ + if (doepint.b.epdisabled) { + + /* Clear the bit in DOEPINTn for this interrupt */ + CLEAR_OUT_EP_INTR(core_if,epnum,epdisabled); + } + /* AHB Error */ + if (doepint.b.ahberr) { + DWC_DEBUGPL(DBG_PCD,"EP%d OUT AHB Error\n", epnum); + DWC_DEBUGPL(DBG_PCD,"EP DMA REG %d \n", core_if->dev_if->out_ep_regs[epnum]->doepdma); + CLEAR_OUT_EP_INTR(core_if,epnum,ahberr); + } + /* Setup Phase Done (contorl EPs) */ + if (doepint.b.setup) { +#ifdef DEBUG_EP0 + DWC_DEBUGPL(DBG_PCD,"EP%d SETUP Done\n", + epnum); +#endif + CLEAR_OUT_EP_INTR(core_if,epnum,setup); + + handle_ep0(pcd); + } + + /** OUT EP BNA Intr */ + if (doepint.b.bna) { + CLEAR_OUT_EP_INTR(core_if,epnum,bna); + if(core_if->dma_desc_enable) { +#ifdef DWC_EN_ISOC + if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { + /* + * This checking is performed to prevent first "false" BNA + * handling occuring right after reconnect + */ + if(dwc_ep->next_frame != 0xffffffff) + dwc_otg_pcd_handle_iso_bna(ep); + } + else +#endif //DWC_EN_ISOC + { + dctl.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dctl); + + /* If Global Continue on BNA is disabled - disable EP*/ + if(!dctl.b.gcontbna) { + doepctl.d32 = 0; + doepctl.b.snak = 1; + doepctl.b.epdis = 1; + dwc_modify_reg32(&dev_if->out_ep_regs[epnum]->doepctl, doepctl.d32, doepctl.d32); + } else { + start_next_request(ep); + } + } + } + } + if (doepint.b.stsphsercvd) { + CLEAR_OUT_EP_INTR(core_if,epnum,stsphsercvd); + if(core_if->dma_desc_enable) { + do_setup_in_status_phase(pcd); + } + } + /* Babble Interrutp */ + if (doepint.b.babble) { + DWC_DEBUGPL(DBG_ANY,"EP%d OUT Babble\n", epnum); + handle_out_ep_babble_intr(pcd, epnum); + + CLEAR_OUT_EP_INTR(core_if,epnum,babble); + } + /* NAK Interrutp */ + if (doepint.b.nak) { + DWC_DEBUGPL(DBG_ANY,"EP%d OUT NAK\n", epnum); + handle_out_ep_nak_intr(pcd, epnum); + + CLEAR_OUT_EP_INTR(core_if,epnum,nak); + } + /* NYET Interrutp */ + if (doepint.b.nyet) { + DWC_DEBUGPL(DBG_ANY,"EP%d OUT NYET\n", epnum); + handle_out_ep_nyet_intr(pcd, epnum); + + CLEAR_OUT_EP_INTR(core_if,epnum,nyet); + } + } + + epnum++; + ep_intr >>=1; + } + + return 1; + +#undef CLEAR_OUT_EP_INTR +} + + +/** + * Incomplete ISO IN Transfer Interrupt. + * This interrupt indicates one of the following conditions occurred + * while transmitting an ISOC transaction. + * - Corrupted IN Token for ISOC EP. + * - Packet not complete in FIFO. + * The follow actions will be taken: + * -# Determine the EP + * -# Set incomplete flag in dwc_ep structure + * -# Disable EP; when "Endpoint Disabled" interrupt is received + * Flush FIFO + */ +int32_t dwc_otg_pcd_handle_incomplete_isoc_in_intr(dwc_otg_pcd_t *pcd) +{ + gintsts_data_t gintsts; + + +#ifdef DWC_EN_ISOC + dwc_otg_dev_if_t *dev_if; + deptsiz_data_t deptsiz = { .d32 = 0}; + depctl_data_t depctl = { .d32 = 0}; + dsts_data_t dsts = { .d32 = 0}; + dwc_ep_t *dwc_ep; + int i; + + dev_if = GET_CORE_IF(pcd)->dev_if; + + for(i = 1; i <= dev_if->num_in_eps; ++i) { + dwc_ep = &pcd->in_ep[i].dwc_ep; + if(dwc_ep->active && + dwc_ep->type == USB_ENDPOINT_XFER_ISOC) + { + deptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->dieptsiz); + depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl); + + if(depctl.b.epdis && deptsiz.d32) { + set_current_pkt_info(GET_CORE_IF(pcd), dwc_ep); + if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { + dwc_ep->cur_pkt = 0; + dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1; + + if(dwc_ep->proc_buf_num) { + dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1; + dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1; + } else { + dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0; + dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0; + } + + } + + dsts.d32 = dwc_read_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts); + dwc_ep->next_frame = dsts.b.soffn; + + dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF(pcd), dwc_ep); + } + } + } + +#else + gintmsk_data_t intr_mask = { .d32 = 0}; + DWC_PRINT("INTERRUPT Handler not implemented for %s\n", + "IN ISOC Incomplete"); + + intr_mask.b.incomplisoin = 1; + dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, + intr_mask.d32, 0); +#endif //DWC_EN_ISOC + + /* Clear interrupt */ + gintsts.d32 = 0; + gintsts.b.incomplisoin = 1; + dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts, + gintsts.d32); + + return 1; +} + +/** + * Incomplete ISO OUT Transfer Interrupt. + * + * This interrupt indicates that the core has dropped an ISO OUT + * packet. The following conditions can be the cause: + * - FIFO Full, the entire packet would not fit in the FIFO. + * - CRC Error + * - Corrupted Token + * The follow actions will be taken: + * -# Determine the EP + * -# Set incomplete flag in dwc_ep structure + * -# Read any data from the FIFO + * -# Disable EP. when "Endpoint Disabled" interrupt is received + * re-enable EP. + */ +int32_t dwc_otg_pcd_handle_incomplete_isoc_out_intr(dwc_otg_pcd_t *pcd) +{ + /* @todo implement ISR */ + gintsts_data_t gintsts; + +#ifdef DWC_EN_ISOC + dwc_otg_dev_if_t *dev_if; + deptsiz_data_t deptsiz = { .d32 = 0}; + depctl_data_t depctl = { .d32 = 0}; + dsts_data_t dsts = { .d32 = 0}; + dwc_ep_t *dwc_ep; + int i; + + dev_if = GET_CORE_IF(pcd)->dev_if; + + for(i = 1; i <= dev_if->num_out_eps; ++i) { + dwc_ep = &pcd->in_ep[i].dwc_ep; + if(pcd->out_ep[i].dwc_ep.active && + pcd->out_ep[i].dwc_ep.type == USB_ENDPOINT_XFER_ISOC) + { + deptsiz.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doeptsiz); + depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl); + + if(depctl.b.epdis && deptsiz.d32) { + set_current_pkt_info(GET_CORE_IF(pcd), &pcd->out_ep[i].dwc_ep); + if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { + dwc_ep->cur_pkt = 0; + dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1; + + if(dwc_ep->proc_buf_num) { + dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1; + dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1; + } else { + dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0; + dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0; + } + + } + + dsts.d32 = dwc_read_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts); + dwc_ep->next_frame = dsts.b.soffn; + + dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF(pcd), dwc_ep); + } + } + } +#else + /** @todo implement ISR */ + gintmsk_data_t intr_mask = { .d32 = 0}; + + DWC_PRINT("INTERRUPT Handler not implemented for %s\n", + "OUT ISOC Incomplete"); + + intr_mask.b.incomplisoout = 1; + dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, + intr_mask.d32, 0); + +#endif // DWC_EN_ISOC + + /* Clear interrupt */ + gintsts.d32 = 0; + gintsts.b.incomplisoout = 1; + dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts, + gintsts.d32); + + return 1; +} + +/** + * This function handles the Global IN NAK Effective interrupt. + * + */ +int32_t dwc_otg_pcd_handle_in_nak_effective(dwc_otg_pcd_t *pcd) +{ + dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if; + depctl_data_t diepctl = { .d32 = 0}; + depctl_data_t diepctl_rd = { .d32 = 0}; + gintmsk_data_t intr_mask = { .d32 = 0}; + gintsts_data_t gintsts; + int i; + + DWC_DEBUGPL(DBG_PCD, "Global IN NAK Effective\n"); + + /* Disable all active IN EPs */ + diepctl.b.epdis = 1; + diepctl.b.snak = 1; + + for (i=0; i <= dev_if->num_in_eps; i++) + { + diepctl_rd.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl); + if (diepctl_rd.b.epena) { + dwc_write_reg32(&dev_if->in_ep_regs[i]->diepctl, + diepctl.d32); + } + } + /* Disable the Global IN NAK Effective Interrupt */ + intr_mask.b.ginnakeff = 1; + dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, + intr_mask.d32, 0); + + /* Clear interrupt */ + gintsts.d32 = 0; + gintsts.b.ginnakeff = 1; + dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, + gintsts.d32); + + return 1; +} + +/** + * OUT NAK Effective. + * + */ +int32_t dwc_otg_pcd_handle_out_nak_effective(dwc_otg_pcd_t *pcd) +{ + gintmsk_data_t intr_mask = { .d32 = 0}; + gintsts_data_t gintsts; + + DWC_PRINT("INTERRUPT Handler not implemented for %s\n", + "Global IN NAK Effective\n"); + /* Disable the Global IN NAK Effective Interrupt */ + intr_mask.b.goutnakeff = 1; + dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, + intr_mask.d32, 0); + + /* Clear interrupt */ + gintsts.d32 = 0; + gintsts.b.goutnakeff = 1; + dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts, + gintsts.d32); + + return 1; +} + + +/** + * PCD interrupt handler. + * + * The PCD handles the device interrupts. Many conditions can cause a + * device interrupt. When an interrupt occurs, the device interrupt + * service routine determines the cause of the interrupt and + * dispatches handling to the appropriate function. These interrupt + * handling functions are described below. + * + * All interrupt registers are processed from LSB to MSB. + * + */ +int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t *pcd) +{ + dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); +#ifdef VERBOSE + dwc_otg_core_global_regs_t *global_regs = + core_if->core_global_regs; +#endif + gintsts_data_t gintr_status; + int32_t retval = 0; + + +#ifdef VERBOSE + DWC_DEBUGPL(DBG_ANY, "%s() gintsts=%08x gintmsk=%08x\n", + __func__, + dwc_read_reg32(&global_regs->gintsts), + dwc_read_reg32(&global_regs->gintmsk)); +#endif + + if (dwc_otg_is_device_mode(core_if)) { + SPIN_LOCK(&pcd->lock); +#ifdef VERBOSE + DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%08x gintmsk=%08x\n", + __func__, + dwc_read_reg32(&global_regs->gintsts), + dwc_read_reg32(&global_regs->gintmsk)); +#endif + + gintr_status.d32 = dwc_otg_read_core_intr(core_if); + +/* + if (!gintr_status.d32) { + SPIN_UNLOCK(&pcd->lock); + return 0; + } +*/ + DWC_DEBUGPL(DBG_PCDV, "%s: gintsts&gintmsk=%08x\n", + __func__, gintr_status.d32); + + if (gintr_status.b.sofintr) { + retval |= dwc_otg_pcd_handle_sof_intr(pcd); + } + if (gintr_status.b.rxstsqlvl) { + retval |= dwc_otg_pcd_handle_rx_status_q_level_intr(pcd); + } + if (gintr_status.b.nptxfempty) { + retval |= dwc_otg_pcd_handle_np_tx_fifo_empty_intr(pcd); + } + if (gintr_status.b.ginnakeff) { + retval |= dwc_otg_pcd_handle_in_nak_effective(pcd); + } + if (gintr_status.b.goutnakeff) { + retval |= dwc_otg_pcd_handle_out_nak_effective(pcd); + } + if (gintr_status.b.i2cintr) { + retval |= dwc_otg_pcd_handle_i2c_intr(pcd); + } + if (gintr_status.b.erlysuspend) { + retval |= dwc_otg_pcd_handle_early_suspend_intr(pcd); + } + if (gintr_status.b.usbreset) { + retval |= dwc_otg_pcd_handle_usb_reset_intr(pcd); + } + if (gintr_status.b.enumdone) { + retval |= dwc_otg_pcd_handle_enum_done_intr(pcd); + } + if (gintr_status.b.isooutdrop) { + retval |= dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(pcd); + } + if (gintr_status.b.eopframe) { + retval |= dwc_otg_pcd_handle_end_periodic_frame_intr(pcd); + } + if (gintr_status.b.epmismatch) { + retval |= dwc_otg_pcd_handle_ep_mismatch_intr(core_if); + } + if (gintr_status.b.inepint) { + if(!core_if->multiproc_int_enable) { + retval |= dwc_otg_pcd_handle_in_ep_intr(pcd); + } + } + if (gintr_status.b.outepintr) { + if(!core_if->multiproc_int_enable) { + retval |= dwc_otg_pcd_handle_out_ep_intr(pcd); + } + } + if (gintr_status.b.incomplisoin) { + retval |= dwc_otg_pcd_handle_incomplete_isoc_in_intr(pcd); + } + if (gintr_status.b.incomplisoout) { + retval |= dwc_otg_pcd_handle_incomplete_isoc_out_intr(pcd); + } + + /* In MPI mode De vice Endpoints intterrupts are asserted + * without setting outepintr and inepint bits set, so these + * Interrupt handlers are called without checking these bit-fields + */ + if(core_if->multiproc_int_enable) { + retval |= dwc_otg_pcd_handle_in_ep_intr(pcd); + retval |= dwc_otg_pcd_handle_out_ep_intr(pcd); + } +#ifdef VERBOSE + DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%0x\n", __func__, + dwc_read_reg32(&global_regs->gintsts)); +#endif + SPIN_UNLOCK(&pcd->lock); + } + + S3C2410X_CLEAR_EINTPEND(); + + return retval; +} + +#endif /* DWC_HOST_ONLY */ diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_regs.h b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_regs.h new file mode 100644 index 0000000000..826576671b --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/dwc_otg_regs.h @@ -0,0 +1,2075 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_regs.h $ + * $Revision: 1.2 $ + * $Date: 2008-11-21 05:39:15 $ + * $Change: 1099526 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + +#ifndef __DWC_OTG_REGS_H__ +#define __DWC_OTG_REGS_H__ + +/** + * @file + * + * This file contains the data structures for accessing the DWC_otg core registers. + * + * The application interfaces with the HS OTG core by reading from and + * writing to the Control and Status Register (CSR) space through the + * AHB Slave interface. These registers are 32 bits wide, and the + * addresses are 32-bit-block aligned. + * CSRs are classified as follows: + * - Core Global Registers + * - Device Mode Registers + * - Device Global Registers + * - Device Endpoint Specific Registers + * - Host Mode Registers + * - Host Global Registers + * - Host Port CSRs + * - Host Channel Specific Registers + * + * Only the Core Global registers can be accessed in both Device and + * Host modes. When the HS OTG core is operating in one mode, either + * Device or Host, the application must not access registers from the + * other mode. When the core switches from one mode to another, the + * registers in the new mode of operation must be reprogrammed as they + * would be after a power-on reset. + */ + +/** Maximum number of Periodic FIFOs */ +#define MAX_PERIO_FIFOS 15 +/** Maximum number of Transmit FIFOs */ +#define MAX_TX_FIFOS 15 + +/** Maximum number of Endpoints/HostChannels */ +#define MAX_EPS_CHANNELS 16 + +/****************************************************************************/ +/** DWC_otg Core registers . + * The dwc_otg_core_global_regs structure defines the size + * and relative field offsets for the Core Global registers. + */ +typedef struct dwc_otg_core_global_regs +{ + /** OTG Control and Status Register. <i>Offset: 000h</i> */ + volatile uint32_t gotgctl; + /** OTG Interrupt Register. <i>Offset: 004h</i> */ + volatile uint32_t gotgint; + /**Core AHB Configuration Register. <i>Offset: 008h</i> */ + volatile uint32_t gahbcfg; + +#define DWC_GLBINTRMASK 0x0001 +#define DWC_DMAENABLE 0x0020 +#define DWC_NPTXEMPTYLVL_EMPTY 0x0080 +#define DWC_NPTXEMPTYLVL_HALFEMPTY 0x0000 +#define DWC_PTXEMPTYLVL_EMPTY 0x0100 +#define DWC_PTXEMPTYLVL_HALFEMPTY 0x0000 + + /**Core USB Configuration Register. <i>Offset: 00Ch</i> */ + volatile uint32_t gusbcfg; + /**Core Reset Register. <i>Offset: 010h</i> */ + volatile uint32_t grstctl; + /**Core Interrupt Register. <i>Offset: 014h</i> */ + volatile uint32_t gintsts; + /**Core Interrupt Mask Register. <i>Offset: 018h</i> */ + volatile uint32_t gintmsk; + /**Receive Status Queue Read Register (Read Only). <i>Offset: 01Ch</i> */ + volatile uint32_t grxstsr; + /**Receive Status Queue Read & POP Register (Read Only). <i>Offset: 020h</i>*/ + volatile uint32_t grxstsp; + /**Receive FIFO Size Register. <i>Offset: 024h</i> */ + volatile uint32_t grxfsiz; + /**Non Periodic Transmit FIFO Size Register. <i>Offset: 028h</i> */ + volatile uint32_t gnptxfsiz; + /**Non Periodic Transmit FIFO/Queue Status Register (Read + * Only). <i>Offset: 02Ch</i> */ + volatile uint32_t gnptxsts; + /**I2C Access Register. <i>Offset: 030h</i> */ + volatile uint32_t gi2cctl; + /**PHY Vendor Control Register. <i>Offset: 034h</i> */ + volatile uint32_t gpvndctl; + /**General Purpose Input/Output Register. <i>Offset: 038h</i> */ + volatile uint32_t ggpio; + /**User ID Register. <i>Offset: 03Ch</i> */ + volatile uint32_t guid; + /**Synopsys ID Register (Read Only). <i>Offset: 040h</i> */ + volatile uint32_t gsnpsid; + /**User HW Config1 Register (Read Only). <i>Offset: 044h</i> */ + volatile uint32_t ghwcfg1; + /**User HW Config2 Register (Read Only). <i>Offset: 048h</i> */ + volatile uint32_t ghwcfg2; +#define DWC_SLAVE_ONLY_ARCH 0 +#define DWC_EXT_DMA_ARCH 1 +#define DWC_INT_DMA_ARCH 2 + +#define DWC_MODE_HNP_SRP_CAPABLE 0 +#define DWC_MODE_SRP_ONLY_CAPABLE 1 +#define DWC_MODE_NO_HNP_SRP_CAPABLE 2 +#define DWC_MODE_SRP_CAPABLE_DEVICE 3 +#define DWC_MODE_NO_SRP_CAPABLE_DEVICE 4 +#define DWC_MODE_SRP_CAPABLE_HOST 5 +#define DWC_MODE_NO_SRP_CAPABLE_HOST 6 + + /**User HW Config3 Register (Read Only). <i>Offset: 04Ch</i> */ + volatile uint32_t ghwcfg3; + /**User HW Config4 Register (Read Only). <i>Offset: 050h</i>*/ + volatile uint32_t ghwcfg4; + /** Reserved <i>Offset: 054h-0FFh</i> */ + volatile uint32_t reserved[43]; + /** Host Periodic Transmit FIFO Size Register. <i>Offset: 100h</i> */ + volatile uint32_t hptxfsiz; + /** Device Periodic Transmit FIFO#n Register if dedicated fifos are disabled, + otherwise Device Transmit FIFO#n Register. + * <i>Offset: 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15 (1<=n<=15).</i> */ + volatile uint32_t dptxfsiz_dieptxf[15]; +} dwc_otg_core_global_regs_t; + +/** + * This union represents the bit fields of the Core OTG Control + * and Status Register (GOTGCTL). Set the bits using the bit + * fields then write the <i>d32</i> value to the register. + */ +typedef union gotgctl_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + unsigned sesreqscs : 1; + unsigned sesreq : 1; + unsigned reserved2_7 : 6; + unsigned hstnegscs : 1; + unsigned hnpreq : 1; + unsigned hstsethnpen : 1; + unsigned devhnpen : 1; + unsigned reserved12_15 : 4; + unsigned conidsts : 1; + unsigned reserved17 : 1; + unsigned asesvld : 1; + unsigned bsesvld : 1; + unsigned currmod : 1; + unsigned reserved21_31 : 11; + } b; +} gotgctl_data_t; + +/** + * This union represents the bit fields of the Core OTG Interrupt Register + * (GOTGINT). Set/clear the bits using the bit fields then write the <i>d32</i> + * value to the register. + */ +typedef union gotgint_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + /** Current Mode */ + unsigned reserved0_1 : 2; + + /** Session End Detected */ + unsigned sesenddet : 1; + + unsigned reserved3_7 : 5; + + /** Session Request Success Status Change */ + unsigned sesreqsucstschng : 1; + /** Host Negotiation Success Status Change */ + unsigned hstnegsucstschng : 1; + + unsigned reserver10_16 : 7; + + /** Host Negotiation Detected */ + unsigned hstnegdet : 1; + /** A-Device Timeout Change */ + unsigned adevtoutchng : 1; + /** Debounce Done */ + unsigned debdone : 1; + + unsigned reserved31_20 : 12; + + } b; +} gotgint_data_t; + + +/** + * This union represents the bit fields of the Core AHB Configuration + * Register (GAHBCFG). Set/clear the bits using the bit fields then + * write the <i>d32</i> value to the register. + */ +typedef union gahbcfg_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + unsigned glblintrmsk : 1; +#define DWC_GAHBCFG_GLBINT_ENABLE 1 + + unsigned hburstlen : 4; +#define DWC_GAHBCFG_INT_DMA_BURST_SINGLE 0 +#define DWC_GAHBCFG_INT_DMA_BURST_INCR 1 +#define DWC_GAHBCFG_INT_DMA_BURST_INCR4 3 +#define DWC_GAHBCFG_INT_DMA_BURST_INCR8 5 +#define DWC_GAHBCFG_INT_DMA_BURST_INCR16 7 + + unsigned dmaenable : 1; +#define DWC_GAHBCFG_DMAENABLE 1 + unsigned reserved : 1; + unsigned nptxfemplvl_txfemplvl : 1; + unsigned ptxfemplvl : 1; +#define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY 1 +#define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY 0 + unsigned reserved9_31 : 23; + } b; +} gahbcfg_data_t; + +/** + * This union represents the bit fields of the Core USB Configuration + * Register (GUSBCFG). Set the bits using the bit fields then write + * the <i>d32</i> value to the register. + */ +typedef union gusbcfg_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + unsigned toutcal : 3; + unsigned phyif : 1; + unsigned ulpi_utmi_sel : 1; + unsigned fsintf : 1; + unsigned physel : 1; + unsigned ddrsel : 1; + unsigned srpcap : 1; + unsigned hnpcap : 1; + unsigned usbtrdtim : 4; + unsigned nptxfrwnden : 1; + unsigned phylpwrclksel : 1; + unsigned otgutmifssel : 1; + unsigned ulpi_fsls : 1; + unsigned ulpi_auto_res : 1; + unsigned ulpi_clk_sus_m : 1; + unsigned ulpi_ext_vbus_drv : 1; + unsigned ulpi_int_vbus_indicator : 1; + unsigned term_sel_dl_pulse : 1; + unsigned reserved23_27 : 5; + unsigned tx_end_delay : 1; + unsigned reserved29_31 : 3; + } b; +} gusbcfg_data_t; + +/** + * This union represents the bit fields of the Core Reset Register + * (GRSTCTL). Set/clear the bits using the bit fields then write the + * <i>d32</i> value to the register. + */ +typedef union grstctl_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + /** Core Soft Reset (CSftRst) (Device and Host) + * + * The application can flush the control logic in the + * entire core using this bit. This bit resets the + * pipelines in the AHB Clock domain as well as the + * PHY Clock domain. + * + * The state machines are reset to an IDLE state, the + * control bits in the CSRs are cleared, all the + * transmit FIFOs and the receive FIFO are flushed. + * + * The status mask bits that control the generation of + * the interrupt, are cleared, to clear the + * interrupt. The interrupt status bits are not + * cleared, so the application can get the status of + * any events that occurred in the core after it has + * set this bit. + * + * Any transactions on the AHB are terminated as soon + * as possible following the protocol. Any + * transactions on the USB are terminated immediately. + * + * The configuration settings in the CSRs are + * unchanged, so the software doesn't have to + * reprogram these registers (Device + * Configuration/Host Configuration/Core System + * Configuration/Core PHY Configuration). + * + * The application can write to this bit, any time it + * wants to reset the core. This is a self clearing + * bit and the core clears this bit after all the + * necessary logic is reset in the core, which may + * take several clocks, depending on the current state + * of the core. + */ + unsigned csftrst : 1; + /** Hclk Soft Reset + * + * The application uses this bit to reset the control logic in + * the AHB clock domain. Only AHB clock domain pipelines are + * reset. + */ + unsigned hsftrst : 1; + /** Host Frame Counter Reset (Host Only)<br> + * + * The application can reset the (micro)frame number + * counter inside the core, using this bit. When the + * (micro)frame counter is reset, the subsequent SOF + * sent out by the core, will have a (micro)frame + * number of 0. + */ + unsigned hstfrm : 1; + /** In Token Sequence Learning Queue Flush + * (INTknQFlsh) (Device Only) + */ + unsigned intknqflsh : 1; + /** RxFIFO Flush (RxFFlsh) (Device and Host) + * + * The application can flush the entire Receive FIFO + * using this bit. <p>The application must first + * ensure that the core is not in the middle of a + * transaction. <p>The application should write into + * this bit, only after making sure that neither the + * DMA engine is reading from the RxFIFO nor the MAC + * is writing the data in to the FIFO. <p>The + * application should wait until the bit is cleared + * before performing any other operations. This bit + * will takes 8 clocks (slowest of PHY or AHB clock) + * to clear. + */ + unsigned rxfflsh : 1; + /** TxFIFO Flush (TxFFlsh) (Device and Host). + * + * This bit is used to selectively flush a single or + * all transmit FIFOs. The application must first + * ensure that the core is not in the middle of a + * transaction. <p>The application should write into + * this bit, only after making sure that neither the + * DMA engine is writing into the TxFIFO nor the MAC + * is reading the data out of the FIFO. <p>The + * application should wait until the core clears this + * bit, before performing any operations. This bit + * will takes 8 clocks (slowest of PHY or AHB clock) + * to clear. + */ + unsigned txfflsh : 1; + + /** TxFIFO Number (TxFNum) (Device and Host). + * + * This is the FIFO number which needs to be flushed, + * using the TxFIFO Flush bit. This field should not + * be changed until the TxFIFO Flush bit is cleared by + * the core. + * - 0x0 : Non Periodic TxFIFO Flush + * - 0x1 : Periodic TxFIFO #1 Flush in device mode + * or Periodic TxFIFO in host mode + * - 0x2 : Periodic TxFIFO #2 Flush in device mode. + * - ... + * - 0xF : Periodic TxFIFO #15 Flush in device mode + * - 0x10: Flush all the Transmit NonPeriodic and + * Transmit Periodic FIFOs in the core + */ + unsigned txfnum : 5; + /** Reserved */ + unsigned reserved11_29 : 19; + /** DMA Request Signal. Indicated DMA request is in + * probress. Used for debug purpose. */ + unsigned dmareq : 1; + /** AHB Master Idle. Indicates the AHB Master State + * Machine is in IDLE condition. */ + unsigned ahbidle : 1; + } b; +} grstctl_t; + + +/** + * This union represents the bit fields of the Core Interrupt Mask + * Register (GINTMSK). Set/clear the bits using the bit fields then + * write the <i>d32</i> value to the register. + */ +typedef union gintmsk_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + unsigned reserved0 : 1; + unsigned modemismatch : 1; + unsigned otgintr : 1; + unsigned sofintr : 1; + unsigned rxstsqlvl : 1; + unsigned nptxfempty : 1; + unsigned ginnakeff : 1; + unsigned goutnakeff : 1; + unsigned reserved8 : 1; + unsigned i2cintr : 1; + unsigned erlysuspend : 1; + unsigned usbsuspend : 1; + unsigned usbreset : 1; + unsigned enumdone : 1; + unsigned isooutdrop : 1; + unsigned eopframe : 1; + unsigned reserved16 : 1; + unsigned epmismatch : 1; + unsigned inepintr : 1; + unsigned outepintr : 1; + unsigned incomplisoin : 1; + unsigned incomplisoout : 1; + unsigned reserved22_23 : 2; + unsigned portintr : 1; + unsigned hcintr : 1; + unsigned ptxfempty : 1; + unsigned reserved27 : 1; + unsigned conidstschng : 1; + unsigned disconnect : 1; + unsigned sessreqintr : 1; + unsigned wkupintr : 1; + } b; +} gintmsk_data_t; +/** + * This union represents the bit fields of the Core Interrupt Register + * (GINTSTS). Set/clear the bits using the bit fields then write the + * <i>d32</i> value to the register. + */ +typedef union gintsts_data +{ + /** raw register data */ + uint32_t d32; +#define DWC_SOF_INTR_MASK 0x0008 + /** register bits */ + struct + { +#define DWC_HOST_MODE 1 + unsigned curmode : 1; + unsigned modemismatch : 1; + unsigned otgintr : 1; + unsigned sofintr : 1; + unsigned rxstsqlvl : 1; + unsigned nptxfempty : 1; + unsigned ginnakeff : 1; + unsigned goutnakeff : 1; + unsigned reserved8 : 1; + unsigned i2cintr : 1; + unsigned erlysuspend : 1; + unsigned usbsuspend : 1; + unsigned usbreset : 1; + unsigned enumdone : 1; + unsigned isooutdrop : 1; + unsigned eopframe : 1; + unsigned intokenrx : 1; + unsigned epmismatch : 1; + unsigned inepint: 1; + unsigned outepintr : 1; + unsigned incomplisoin : 1; + unsigned incomplisoout : 1; + unsigned reserved22_23 : 2; + unsigned portintr : 1; + unsigned hcintr : 1; + unsigned ptxfempty : 1; + unsigned reserved27 : 1; + unsigned conidstschng : 1; + unsigned disconnect : 1; + unsigned sessreqintr : 1; + unsigned wkupintr : 1; + } b; +} gintsts_data_t; + + +/** + * This union represents the bit fields in the Device Receive Status Read and + * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i> + * element then read out the bits using the <i>b</i>it elements. + */ +typedef union device_grxsts_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + unsigned epnum : 4; + unsigned bcnt : 11; + unsigned dpid : 2; + +#define DWC_STS_DATA_UPDT 0x2 // OUT Data Packet +#define DWC_STS_XFER_COMP 0x3 // OUT Data Transfer Complete + +#define DWC_DSTS_GOUT_NAK 0x1 // Global OUT NAK +#define DWC_DSTS_SETUP_COMP 0x4 // Setup Phase Complete +#define DWC_DSTS_SETUP_UPDT 0x6 // SETUP Packet + unsigned pktsts : 4; + unsigned fn : 4; + unsigned reserved : 7; + } b; +} device_grxsts_data_t; + +/** + * This union represents the bit fields in the Host Receive Status Read and + * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i> + * element then read out the bits using the <i>b</i>it elements. + */ +typedef union host_grxsts_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + unsigned chnum : 4; + unsigned bcnt : 11; + unsigned dpid : 2; + + unsigned pktsts : 4; +#define DWC_GRXSTS_PKTSTS_IN 0x2 +#define DWC_GRXSTS_PKTSTS_IN_XFER_COMP 0x3 +#define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5 +#define DWC_GRXSTS_PKTSTS_CH_HALTED 0x7 + + unsigned reserved : 11; + } b; +} host_grxsts_data_t; + +/** + * This union represents the bit fields in the FIFO Size Registers (HPTXFSIZ, + * GNPTXFSIZ, DPTXFSIZn, DIEPTXFn). Read the register into the <i>d32</i> element then + * read out the bits using the <i>b</i>it elements. + */ +typedef union fifosize_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + unsigned startaddr : 16; + unsigned depth : 16; + } b; +} fifosize_data_t; + +/** + * This union represents the bit fields in the Non-Periodic Transmit + * FIFO/Queue Status Register (GNPTXSTS). Read the register into the + * <i>d32</i> element then read out the bits using the <i>b</i>it + * elements. + */ +typedef union gnptxsts_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + unsigned nptxfspcavail : 16; + unsigned nptxqspcavail : 8; + /** Top of the Non-Periodic Transmit Request Queue + * - bit 24 - Terminate (Last entry for the selected + * channel/EP) + * - bits 26:25 - Token Type + * - 2'b00 - IN/OUT + * - 2'b01 - Zero Length OUT + * - 2'b10 - PING/Complete Split + * - 2'b11 - Channel Halt + * - bits 30:27 - Channel/EP Number + */ + unsigned nptxqtop_terminate : 1; + unsigned nptxqtop_token : 2; + unsigned nptxqtop_chnep : 4; + unsigned reserved : 1; + } b; +} gnptxsts_data_t; + +/** + * This union represents the bit fields in the Transmit + * FIFO Status Register (DTXFSTS). Read the register into the + * <i>d32</i> element then read out the bits using the <i>b</i>it + * elements. + */ +typedef union dtxfsts_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + unsigned txfspcavail : 16; + unsigned reserved : 16; + } b; +} dtxfsts_data_t; + +/** + * This union represents the bit fields in the I2C Control Register + * (I2CCTL). Read the register into the <i>d32</i> element then read out the + * bits using the <i>b</i>it elements. + */ +typedef union gi2cctl_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + unsigned rwdata : 8; + unsigned regaddr : 8; + unsigned addr : 7; + unsigned i2cen : 1; + unsigned ack : 1; + unsigned i2csuspctl : 1; + unsigned i2cdevaddr : 2; + unsigned reserved : 2; + unsigned rw : 1; + unsigned bsydne : 1; + } b; +} gi2cctl_data_t; + +/** + * This union represents the bit fields in the User HW Config1 + * Register. Read the register into the <i>d32</i> element then read + * out the bits using the <i>b</i>it elements. + */ +typedef union hwcfg1_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + unsigned ep_dir0 : 2; + unsigned ep_dir1 : 2; + unsigned ep_dir2 : 2; + unsigned ep_dir3 : 2; + unsigned ep_dir4 : 2; + unsigned ep_dir5 : 2; + unsigned ep_dir6 : 2; + unsigned ep_dir7 : 2; + unsigned ep_dir8 : 2; + unsigned ep_dir9 : 2; + unsigned ep_dir10 : 2; + unsigned ep_dir11 : 2; + unsigned ep_dir12 : 2; + unsigned ep_dir13 : 2; + unsigned ep_dir14 : 2; + unsigned ep_dir15 : 2; + } b; +} hwcfg1_data_t; + +/** + * This union represents the bit fields in the User HW Config2 + * Register. Read the register into the <i>d32</i> element then read + * out the bits using the <i>b</i>it elements. + */ +typedef union hwcfg2_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + /* GHWCFG2 */ + unsigned op_mode : 3; +#define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0 +#define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1 +#define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2 +#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3 +#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4 +#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5 +#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6 + + unsigned architecture : 2; + unsigned point2point : 1; + unsigned hs_phy_type : 2; +#define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0 +#define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1 +#define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2 +#define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3 + + unsigned fs_phy_type : 2; + unsigned num_dev_ep : 4; + unsigned num_host_chan : 4; + unsigned perio_ep_supported : 1; + unsigned dynamic_fifo : 1; + unsigned multi_proc_int : 1; + unsigned reserved21 : 1; + unsigned nonperio_tx_q_depth : 2; + unsigned host_perio_tx_q_depth : 2; + unsigned dev_token_q_depth : 5; + unsigned reserved31 : 1; + } b; +} hwcfg2_data_t; + +/** + * This union represents the bit fields in the User HW Config3 + * Register. Read the register into the <i>d32</i> element then read + * out the bits using the <i>b</i>it elements. + */ +typedef union hwcfg3_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + /* GHWCFG3 */ + unsigned xfer_size_cntr_width : 4; + unsigned packet_size_cntr_width : 3; + unsigned otg_func : 1; + unsigned i2c : 1; + unsigned vendor_ctrl_if : 1; + unsigned optional_features : 1; + unsigned synch_reset_type : 1; + unsigned ahb_phy_clock_synch : 1; + unsigned reserved15_13 : 3; + unsigned dfifo_depth : 16; + } b; +} hwcfg3_data_t; + +/** + * This union represents the bit fields in the User HW Config4 + * Register. Read the register into the <i>d32</i> element then read + * out the bits using the <i>b</i>it elements. + */ +typedef union hwcfg4_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + unsigned num_dev_perio_in_ep : 4; + unsigned power_optimiz : 1; + unsigned min_ahb_freq : 9; + unsigned utmi_phy_data_width : 2; + unsigned num_dev_mode_ctrl_ep : 4; + unsigned iddig_filt_en : 1; + unsigned vbus_valid_filt_en : 1; + unsigned a_valid_filt_en : 1; + unsigned b_valid_filt_en : 1; + unsigned session_end_filt_en : 1; + unsigned ded_fifo_en : 1; + unsigned num_in_eps : 4; + unsigned desc_dma : 1; + unsigned desc_dma_dyn : 1; + } b; +} hwcfg4_data_t; + +//////////////////////////////////////////// +// Device Registers +/** + * Device Global Registers. <i>Offsets 800h-BFFh</i> + * + * The following structures define the size and relative field offsets + * for the Device Mode Registers. + * + * <i>These registers are visible only in Device mode and must not be + * accessed in Host mode, as the results are unknown.</i> + */ +typedef struct dwc_otg_dev_global_regs +{ + /** Device Configuration Register. <i>Offset 800h</i> */ + volatile uint32_t dcfg; + /** Device Control Register. <i>Offset: 804h</i> */ + volatile uint32_t dctl; + /** Device Status Register (Read Only). <i>Offset: 808h</i> */ + volatile uint32_t dsts; + /** Reserved. <i>Offset: 80Ch</i> */ + uint32_t unused; + /** Device IN Endpoint Common Interrupt Mask + * Register. <i>Offset: 810h</i> */ + volatile uint32_t diepmsk; + /** Device OUT Endpoint Common Interrupt Mask + * Register. <i>Offset: 814h</i> */ + volatile uint32_t doepmsk; + /** Device All Endpoints Interrupt Register. <i>Offset: 818h</i> */ + volatile uint32_t daint; + /** Device All Endpoints Interrupt Mask Register. <i>Offset: + * 81Ch</i> */ + volatile uint32_t daintmsk; + /** Device IN Token Queue Read Register-1 (Read Only). + * <i>Offset: 820h</i> */ + volatile uint32_t dtknqr1; + /** Device IN Token Queue Read Register-2 (Read Only). + * <i>Offset: 824h</i> */ + volatile uint32_t dtknqr2; + /** Device VBUS discharge Register. <i>Offset: 828h</i> */ + volatile uint32_t dvbusdis; + /** Device VBUS Pulse Register. <i>Offset: 82Ch</i> */ + volatile uint32_t dvbuspulse; + /** Device IN Token Queue Read Register-3 (Read Only). / + * Device Thresholding control register (Read/Write) + * <i>Offset: 830h</i> */ + volatile uint32_t dtknqr3_dthrctl; + /** Device IN Token Queue Read Register-4 (Read Only). / + * Device IN EPs empty Inr. Mask Register (Read/Write) + * <i>Offset: 834h</i> */ + volatile uint32_t dtknqr4_fifoemptymsk; + /** Device Each Endpoint Interrupt Register (Read Only). / + * <i>Offset: 838h</i> */ + volatile uint32_t deachint; + /** Device Each Endpoint Interrupt mask Register (Read/Write). / + * <i>Offset: 83Ch</i> */ + volatile uint32_t deachintmsk; + /** Device Each In Endpoint Interrupt mask Register (Read/Write). / + * <i>Offset: 840h</i> */ + volatile uint32_t diepeachintmsk[MAX_EPS_CHANNELS]; + /** Device Each Out Endpoint Interrupt mask Register (Read/Write). / + * <i>Offset: 880h</i> */ + volatile uint32_t doepeachintmsk[MAX_EPS_CHANNELS]; +} dwc_otg_device_global_regs_t; + +/** + * This union represents the bit fields in the Device Configuration + * Register. Read the register into the <i>d32</i> member then + * set/clear the bits using the <i>b</i>it elements. Write the + * <i>d32</i> member to the dcfg register. + */ +typedef union dcfg_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + /** Device Speed */ + unsigned devspd : 2; + /** Non Zero Length Status OUT Handshake */ + unsigned nzstsouthshk : 1; +#define DWC_DCFG_SEND_STALL 1 + + unsigned reserved3 : 1; + /** Device Addresses */ + unsigned devaddr : 7; + /** Periodic Frame Interval */ + unsigned perfrint : 2; +#define DWC_DCFG_FRAME_INTERVAL_80 0 +#define DWC_DCFG_FRAME_INTERVAL_85 1 +#define DWC_DCFG_FRAME_INTERVAL_90 2 +#define DWC_DCFG_FRAME_INTERVAL_95 3 + + unsigned reserved13_17 : 5; + /** In Endpoint Mis-match count */ + unsigned epmscnt : 5; + /** Enable Descriptor DMA in Device mode */ + unsigned descdma : 1; + } b; +} dcfg_data_t; + +/** + * This union represents the bit fields in the Device Control + * Register. Read the register into the <i>d32</i> member then + * set/clear the bits using the <i>b</i>it elements. + */ +typedef union dctl_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + /** Remote Wakeup */ + unsigned rmtwkupsig : 1; + /** Soft Disconnect */ + unsigned sftdiscon : 1; + /** Global Non-Periodic IN NAK Status */ + unsigned gnpinnaksts : 1; + /** Global OUT NAK Status */ + unsigned goutnaksts : 1; + /** Test Control */ + unsigned tstctl : 3; + /** Set Global Non-Periodic IN NAK */ + unsigned sgnpinnak : 1; + /** Clear Global Non-Periodic IN NAK */ + unsigned cgnpinnak : 1; + /** Set Global OUT NAK */ + unsigned sgoutnak : 1; + /** Clear Global OUT NAK */ + unsigned cgoutnak : 1; + + /** Power-On Programming Done */ + unsigned pwronprgdone : 1; + /** Global Continue on BNA */ + unsigned gcontbna : 1; + /** Global Multi Count */ + unsigned gmc : 2; + /** Ignore Frame Number for ISOC EPs */ + unsigned ifrmnum : 1; + /** NAK on Babble */ + unsigned nakonbble : 1; + + unsigned reserved16_31 : 16; + } b; +} dctl_data_t; + +/** + * This union represents the bit fields in the Device Status + * Register. Read the register into the <i>d32</i> member then + * set/clear the bits using the <i>b</i>it elements. + */ +typedef union dsts_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + /** Suspend Status */ + unsigned suspsts : 1; + /** Enumerated Speed */ + unsigned enumspd : 2; +#define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0 +#define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1 +#define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ 2 +#define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ 3 + /** Erratic Error */ + unsigned errticerr : 1; + unsigned reserved4_7: 4; + /** Frame or Microframe Number of the received SOF */ + unsigned soffn : 14; + unsigned reserved22_31 : 10; + } b; +} dsts_data_t; + + +/** + * This union represents the bit fields in the Device IN EP Interrupt + * Register and the Device IN EP Common Mask Register. + * + * - Read the register into the <i>d32</i> member then set/clear the + * bits using the <i>b</i>it elements. + */ +typedef union diepint_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + /** Transfer complete mask */ + unsigned xfercompl : 1; + /** Endpoint disable mask */ + unsigned epdisabled : 1; + /** AHB Error mask */ + unsigned ahberr : 1; + /** TimeOUT Handshake mask (non-ISOC EPs) */ + unsigned timeout : 1; + /** IN Token received with TxF Empty mask */ + unsigned intktxfemp : 1; + /** IN Token Received with EP mismatch mask */ + unsigned intknepmis : 1; + /** IN Endpoint HAK Effective mask */ + unsigned inepnakeff : 1; + /** IN Endpoint HAK Effective mask */ + unsigned emptyintr : 1; + + unsigned txfifoundrn : 1; + + /** BNA Interrupt mask */ + unsigned bna : 1; + + unsigned reserved10_12 : 3; + /** BNA Interrupt mask */ + unsigned nak : 1; + + unsigned reserved14_31 : 18; + } b; +} diepint_data_t; + +/** + * This union represents the bit fields in the Device IN EP + * Common/Dedicated Interrupt Mask Register. + */ +typedef union diepint_data diepmsk_data_t; + +/** + * This union represents the bit fields in the Device OUT EP Interrupt + * Registerand Device OUT EP Common Interrupt Mask Register. + * + * - Read the register into the <i>d32</i> member then set/clear the + * bits using the <i>b</i>it elements. + */ +typedef union doepint_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + /** Transfer complete */ + unsigned xfercompl : 1; + /** Endpoint disable */ + unsigned epdisabled : 1; + /** AHB Error */ + unsigned ahberr : 1; + /** Setup Phase Done (contorl EPs) */ + unsigned setup : 1; + /** OUT Token Received when Endpoint Disabled */ + unsigned outtknepdis : 1; + + unsigned stsphsercvd : 1; + /** Back-to-Back SETUP Packets Received */ + unsigned back2backsetup : 1; + + unsigned reserved7 : 1; + /** OUT packet Error */ + unsigned outpkterr : 1; + /** BNA Interrupt */ + unsigned bna : 1; + + unsigned reserved10 : 1; + /** Packet Drop Status */ + unsigned pktdrpsts : 1; + /** Babble Interrupt */ + unsigned babble : 1; + /** NAK Interrupt */ + unsigned nak : 1; + /** NYET Interrupt */ + unsigned nyet : 1; + + unsigned reserved15_31 : 17; + } b; +} doepint_data_t; + +/** + * This union represents the bit fields in the Device OUT EP + * Common/Dedicated Interrupt Mask Register. + */ +typedef union doepint_data doepmsk_data_t; + +/** + * This union represents the bit fields in the Device All EP Interrupt + * and Mask Registers. + * - Read the register into the <i>d32</i> member then set/clear the + * bits using the <i>b</i>it elements. + */ +typedef union daint_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + /** IN Endpoint bits */ + unsigned in : 16; + /** OUT Endpoint bits */ + unsigned out : 16; + } ep; + struct + { + /** IN Endpoint bits */ + unsigned inep0 : 1; + unsigned inep1 : 1; + unsigned inep2 : 1; + unsigned inep3 : 1; + unsigned inep4 : 1; + unsigned inep5 : 1; + unsigned inep6 : 1; + unsigned inep7 : 1; + unsigned inep8 : 1; + unsigned inep9 : 1; + unsigned inep10 : 1; + unsigned inep11 : 1; + unsigned inep12 : 1; + unsigned inep13 : 1; + unsigned inep14 : 1; + unsigned inep15 : 1; + /** OUT Endpoint bits */ + unsigned outep0 : 1; + unsigned outep1 : 1; + unsigned outep2 : 1; + unsigned outep3 : 1; + unsigned outep4 : 1; + unsigned outep5 : 1; + unsigned outep6 : 1; + unsigned outep7 : 1; + unsigned outep8 : 1; + unsigned outep9 : 1; + unsigned outep10 : 1; + unsigned outep11 : 1; + unsigned outep12 : 1; + unsigned outep13 : 1; + unsigned outep14 : 1; + unsigned outep15 : 1; + } b; +} daint_data_t; + +/** + * This union represents the bit fields in the Device IN Token Queue + * Read Registers. + * - Read the register into the <i>d32</i> member. + * - READ-ONLY Register + */ +typedef union dtknq1_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + /** In Token Queue Write Pointer */ + unsigned intknwptr : 5; + /** Reserved */ + unsigned reserved05_06 : 2; + /** write pointer has wrapped. */ + unsigned wrap_bit : 1; + /** EP Numbers of IN Tokens 0 ... 4 */ + unsigned epnums0_5 : 24; + }b; +} dtknq1_data_t; + +/** + * This union represents Threshold control Register + * - Read and write the register into the <i>d32</i> member. + * - READ-WRITABLE Register + */ +typedef union dthrctl_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + /** non ISO Tx Thr. Enable */ + unsigned non_iso_thr_en : 1; + /** ISO Tx Thr. Enable */ + unsigned iso_thr_en : 1; + /** Tx Thr. Length */ + unsigned tx_thr_len : 9; + /** Reserved */ + unsigned reserved11_15 : 5; + /** Rx Thr. Enable */ + unsigned rx_thr_en : 1; + /** Rx Thr. Length */ + unsigned rx_thr_len : 9; + /** Reserved */ + unsigned reserved26_31 : 6; + }b; +} dthrctl_data_t; + + +/** + * Device Logical IN Endpoint-Specific Registers. <i>Offsets + * 900h-AFCh</i> + * + * There will be one set of endpoint registers per logical endpoint + * implemented. + * + * <i>These registers are visible only in Device mode and must not be + * accessed in Host mode, as the results are unknown.</i> + */ +typedef struct dwc_otg_dev_in_ep_regs +{ + /** Device IN Endpoint Control Register. <i>Offset:900h + + * (ep_num * 20h) + 00h</i> */ + volatile uint32_t diepctl; + /** Reserved. <i>Offset:900h + (ep_num * 20h) + 04h</i> */ + uint32_t reserved04; + /** Device IN Endpoint Interrupt Register. <i>Offset:900h + + * (ep_num * 20h) + 08h</i> */ + volatile uint32_t diepint; + /** Reserved. <i>Offset:900h + (ep_num * 20h) + 0Ch</i> */ + uint32_t reserved0C; + /** Device IN Endpoint Transfer Size + * Register. <i>Offset:900h + (ep_num * 20h) + 10h</i> */ + volatile uint32_t dieptsiz; + /** Device IN Endpoint DMA Address Register. <i>Offset:900h + + * (ep_num * 20h) + 14h</i> */ + volatile uint32_t diepdma; + /** Device IN Endpoint Transmit FIFO Status Register. <i>Offset:900h + + * (ep_num * 20h) + 18h</i> */ + volatile uint32_t dtxfsts; + /** Device IN Endpoint DMA Buffer Register. <i>Offset:900h + + * (ep_num * 20h) + 1Ch</i> */ + volatile uint32_t diepdmab; +} dwc_otg_dev_in_ep_regs_t; + +/** + * Device Logical OUT Endpoint-Specific Registers. <i>Offsets: + * B00h-CFCh</i> + * + * There will be one set of endpoint registers per logical endpoint + * implemented. + * + * <i>These registers are visible only in Device mode and must not be + * accessed in Host mode, as the results are unknown.</i> + */ +typedef struct dwc_otg_dev_out_ep_regs +{ + /** Device OUT Endpoint Control Register. <i>Offset:B00h + + * (ep_num * 20h) + 00h</i> */ + volatile uint32_t doepctl; + /** Device OUT Endpoint Frame number Register. <i>Offset: + * B00h + (ep_num * 20h) + 04h</i> */ + volatile uint32_t doepfn; + /** Device OUT Endpoint Interrupt Register. <i>Offset:B00h + + * (ep_num * 20h) + 08h</i> */ + volatile uint32_t doepint; + /** Reserved. <i>Offset:B00h + (ep_num * 20h) + 0Ch</i> */ + uint32_t reserved0C; + /** Device OUT Endpoint Transfer Size Register. <i>Offset: + * B00h + (ep_num * 20h) + 10h</i> */ + volatile uint32_t doeptsiz; + /** Device OUT Endpoint DMA Address Register. <i>Offset:B00h + * + (ep_num * 20h) + 14h</i> */ + volatile uint32_t doepdma; + /** Reserved. <i>Offset:B00h + * (ep_num * 20h) + 1Ch</i> */ + uint32_t unused; + /** Device OUT Endpoint DMA Buffer Register. <i>Offset:B00h + * + (ep_num * 20h) + 1Ch</i> */ + uint32_t doepdmab; +} dwc_otg_dev_out_ep_regs_t; + +/** + * This union represents the bit fields in the Device EP Control + * Register. Read the register into the <i>d32</i> member then + * set/clear the bits using the <i>b</i>it elements. + */ +typedef union depctl_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + /** Maximum Packet Size + * IN/OUT EPn + * IN/OUT EP0 - 2 bits + * 2'b00: 64 Bytes + * 2'b01: 32 + * 2'b10: 16 + * 2'b11: 8 */ + unsigned mps : 11; +#define DWC_DEP0CTL_MPS_64 0 +#define DWC_DEP0CTL_MPS_32 1 +#define DWC_DEP0CTL_MPS_16 2 +#define DWC_DEP0CTL_MPS_8 3 + + /** Next Endpoint + * IN EPn/IN EP0 + * OUT EPn/OUT EP0 - reserved */ + unsigned nextep : 4; + + /** USB Active Endpoint */ + unsigned usbactep : 1; + + /** Endpoint DPID (INTR/Bulk IN and OUT endpoints) + * This field contains the PID of the packet going to + * be received or transmitted on this endpoint. The + * application should program the PID of the first + * packet going to be received or transmitted on this + * endpoint , after the endpoint is + * activated. Application use the SetD1PID and + * SetD0PID fields of this register to program either + * D0 or D1 PID. + * + * The encoding for this field is + * - 0: D0 + * - 1: D1 + */ + unsigned dpid : 1; + + /** NAK Status */ + unsigned naksts : 1; + + /** Endpoint Type + * 2'b00: Control + * 2'b01: Isochronous + * 2'b10: Bulk + * 2'b11: Interrupt */ + unsigned eptype : 2; + + /** Snoop Mode + * OUT EPn/OUT EP0 + * IN EPn/IN EP0 - reserved */ + unsigned snp : 1; + + /** Stall Handshake */ + unsigned stall : 1; + + /** Tx Fifo Number + * IN EPn/IN EP0 + * OUT EPn/OUT EP0 - reserved */ + unsigned txfnum : 4; + + /** Clear NAK */ + unsigned cnak : 1; + /** Set NAK */ + unsigned snak : 1; + /** Set DATA0 PID (INTR/Bulk IN and OUT endpoints) + * Writing to this field sets the Endpoint DPID (DPID) + * field in this register to DATA0. Set Even + * (micro)frame (SetEvenFr) (ISO IN and OUT Endpoints) + * Writing to this field sets the Even/Odd + * (micro)frame (EO_FrNum) field to even (micro) + * frame. + */ + unsigned setd0pid : 1; + /** Set DATA1 PID (INTR/Bulk IN and OUT endpoints) + * Writing to this field sets the Endpoint DPID (DPID) + * field in this register to DATA1 Set Odd + * (micro)frame (SetOddFr) (ISO IN and OUT Endpoints) + * Writing to this field sets the Even/Odd + * (micro)frame (EO_FrNum) field to odd (micro) frame. + */ + unsigned setd1pid : 1; + + /** Endpoint Disable */ + unsigned epdis : 1; + /** Endpoint Enable */ + unsigned epena : 1; + } b; +} depctl_data_t; + +/** + * This union represents the bit fields in the Device EP Transfer + * Size Register. Read the register into the <i>d32</i> member then + * set/clear the bits using the <i>b</i>it elements. + */ +typedef union deptsiz_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct { + /** Transfer size */ + unsigned xfersize : 19; + /** Packet Count */ + unsigned pktcnt : 10; + /** Multi Count - Periodic IN endpoints */ + unsigned mc : 2; + unsigned reserved : 1; + } b; +} deptsiz_data_t; + +/** + * This union represents the bit fields in the Device EP 0 Transfer + * Size Register. Read the register into the <i>d32</i> member then + * set/clear the bits using the <i>b</i>it elements. + */ +typedef union deptsiz0_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct { + /** Transfer size */ + unsigned xfersize : 7; + /** Reserved */ + unsigned reserved7_18 : 12; + /** Packet Count */ + unsigned pktcnt : 1; + /** Reserved */ + unsigned reserved20_28 : 9; + /**Setup Packet Count (DOEPTSIZ0 Only) */ + unsigned supcnt : 2; + unsigned reserved31; + } b; +} deptsiz0_data_t; + + +///////////////////////////////////////////////// +// DMA Descriptor Specific Structures +// + +/** Buffer status definitions */ + +#define BS_HOST_READY 0x0 +#define BS_DMA_BUSY 0x1 +#define BS_DMA_DONE 0x2 +#define BS_HOST_BUSY 0x3 + +/** Receive/Transmit status definitions */ + +#define RTS_SUCCESS 0x0 +#define RTS_BUFFLUSH 0x1 +#define RTS_RESERVED 0x2 +#define RTS_BUFERR 0x3 + + +/** + * This union represents the bit fields in the DMA Descriptor + * status quadlet. Read the quadlet into the <i>d32</i> member then + * set/clear the bits using the <i>b</i>it, <i>b_iso_out</i> and + * <i>b_iso_in</i> elements. + */ +typedef union desc_sts_data +{ + /** raw register data */ + uint32_t d32; + /** quadlet bits */ + struct { + /** Received number of bytes */ + unsigned bytes : 16; + + unsigned reserved16_22 : 7; + /** Multiple Transfer - only for OUT EPs */ + unsigned mtrf : 1; + /** Setup Packet received - only for OUT EPs */ + unsigned sr : 1; + /** Interrupt On Complete */ + unsigned ioc : 1; + /** Short Packet */ + unsigned sp : 1; + /** Last */ + unsigned l : 1; + /** Receive Status */ + unsigned sts : 2; + /** Buffer Status */ + unsigned bs : 2; + } b; + +#ifdef DWC_EN_ISOC + /** iso out quadlet bits */ + struct { + /** Received number of bytes */ + unsigned rxbytes : 11; + + unsigned reserved11 : 1; + /** Frame Number */ + unsigned framenum : 11; + /** Received ISO Data PID */ + unsigned pid : 2; + /** Interrupt On Complete */ + unsigned ioc : 1; + /** Short Packet */ + unsigned sp : 1; + /** Last */ + unsigned l : 1; + /** Receive Status */ + unsigned rxsts : 2; + /** Buffer Status */ + unsigned bs : 2; + } b_iso_out; + + /** iso in quadlet bits */ + struct { + /** Transmited number of bytes */ + unsigned txbytes : 12; + /** Frame Number */ + unsigned framenum : 11; + /** Transmited ISO Data PID */ + unsigned pid : 2; + /** Interrupt On Complete */ + unsigned ioc : 1; + /** Short Packet */ + unsigned sp : 1; + /** Last */ + unsigned l : 1; + /** Transmit Status */ + unsigned txsts : 2; + /** Buffer Status */ + unsigned bs : 2; + } b_iso_in; +#endif //DWC_EN_ISOC +} desc_sts_data_t; + +/** + * DMA Descriptor structure + * + * DMA Descriptor structure contains two quadlets: + * Status quadlet and Data buffer pointer. + */ +typedef struct dwc_otg_dma_desc +{ + /** DMA Descriptor status quadlet */ + desc_sts_data_t status; + /** DMA Descriptor data buffer pointer */ + dma_addr_t buf; +} dwc_otg_dma_desc_t; + +/** + * The dwc_otg_dev_if structure contains information needed to manage + * the DWC_otg controller acting in device mode. It represents the + * programming view of the device-specific aspects of the controller. + */ +typedef struct dwc_otg_dev_if +{ + /** Pointer to device Global registers. + * Device Global Registers starting at offset 800h + */ + dwc_otg_device_global_regs_t *dev_global_regs; +#define DWC_DEV_GLOBAL_REG_OFFSET 0x800 + + /** + * Device Logical IN Endpoint-Specific Registers 900h-AFCh + */ + dwc_otg_dev_in_ep_regs_t *in_ep_regs[MAX_EPS_CHANNELS]; +#define DWC_DEV_IN_EP_REG_OFFSET 0x900 +#define DWC_EP_REG_OFFSET 0x20 + + /** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */ + dwc_otg_dev_out_ep_regs_t *out_ep_regs[MAX_EPS_CHANNELS]; +#define DWC_DEV_OUT_EP_REG_OFFSET 0xB00 + + /* Device configuration information*/ + uint8_t speed; /**< Device Speed 0: Unknown, 1: LS, 2:FS, 3: HS */ + uint8_t num_in_eps; /**< Number # of Tx EP range: 0-15 exept ep0 */ + uint8_t num_out_eps; /**< Number # of Rx EP range: 0-15 exept ep 0*/ + + /** Size of periodic FIFOs (Bytes) */ + uint16_t perio_tx_fifo_size[MAX_PERIO_FIFOS]; + + /** Size of Tx FIFOs (Bytes) */ + uint16_t tx_fifo_size[MAX_TX_FIFOS]; + + /** Thresholding enable flags and length varaiables **/ + uint16_t rx_thr_en; + uint16_t iso_tx_thr_en; + uint16_t non_iso_tx_thr_en; + + uint16_t rx_thr_length; + uint16_t tx_thr_length; + + /** + * Pointers to the DMA Descriptors for EP0 Control + * transfers (virtual and physical) + */ + + /** 2 descriptors for SETUP packets */ + uint32_t dma_setup_desc_addr[2]; + dwc_otg_dma_desc_t* setup_desc_addr[2]; + + /** Pointer to Descriptor with latest SETUP packet */ + dwc_otg_dma_desc_t* psetup; + + /** Index of current SETUP handler descriptor */ + uint32_t setup_desc_index; + + /** Descriptor for Data In or Status In phases */ + uint32_t dma_in_desc_addr; + dwc_otg_dma_desc_t* in_desc_addr;; + + /** Descriptor for Data Out or Status Out phases */ + uint32_t dma_out_desc_addr; + dwc_otg_dma_desc_t* out_desc_addr; + +} dwc_otg_dev_if_t; + + + + +///////////////////////////////////////////////// +// Host Mode Register Structures +// +/** + * The Host Global Registers structure defines the size and relative + * field offsets for the Host Mode Global Registers. Host Global + * Registers offsets 400h-7FFh. +*/ +typedef struct dwc_otg_host_global_regs +{ + /** Host Configuration Register. <i>Offset: 400h</i> */ + volatile uint32_t hcfg; + /** Host Frame Interval Register. <i>Offset: 404h</i> */ + volatile uint32_t hfir; + /** Host Frame Number / Frame Remaining Register. <i>Offset: 408h</i> */ + volatile uint32_t hfnum; + /** Reserved. <i>Offset: 40Ch</i> */ + uint32_t reserved40C; + /** Host Periodic Transmit FIFO/ Queue Status Register. <i>Offset: 410h</i> */ + volatile uint32_t hptxsts; + /** Host All Channels Interrupt Register. <i>Offset: 414h</i> */ + volatile uint32_t haint; + /** Host All Channels Interrupt Mask Register. <i>Offset: 418h</i> */ + volatile uint32_t haintmsk; +} dwc_otg_host_global_regs_t; + +/** + * This union represents the bit fields in the Host Configuration Register. + * Read the register into the <i>d32</i> member then set/clear the bits using + * the <i>b</i>it elements. Write the <i>d32</i> member to the hcfg register. + */ +typedef union hcfg_data +{ + /** raw register data */ + uint32_t d32; + + /** register bits */ + struct + { + /** FS/LS Phy Clock Select */ + unsigned fslspclksel : 2; +#define DWC_HCFG_30_60_MHZ 0 +#define DWC_HCFG_48_MHZ 1 +#define DWC_HCFG_6_MHZ 2 + + /** FS/LS Only Support */ + unsigned fslssupp : 1; + } b; +} hcfg_data_t; + +/** + * This union represents the bit fields in the Host Frame Remaing/Number + * Register. + */ +typedef union hfir_data +{ + /** raw register data */ + uint32_t d32; + + /** register bits */ + struct + { + unsigned frint : 16; + unsigned reserved : 16; + } b; +} hfir_data_t; + +/** + * This union represents the bit fields in the Host Frame Remaing/Number + * Register. + */ +typedef union hfnum_data +{ + /** raw register data */ + uint32_t d32; + + /** register bits */ + struct + { + unsigned frnum : 16; +#define DWC_HFNUM_MAX_FRNUM 0x3FFF + unsigned frrem : 16; + } b; +} hfnum_data_t; + +typedef union hptxsts_data +{ + /** raw register data */ + uint32_t d32; + + /** register bits */ + struct + { + unsigned ptxfspcavail : 16; + unsigned ptxqspcavail : 8; + /** Top of the Periodic Transmit Request Queue + * - bit 24 - Terminate (last entry for the selected channel) + * - bits 26:25 - Token Type + * - 2'b00 - Zero length + * - 2'b01 - Ping + * - 2'b10 - Disable + * - bits 30:27 - Channel Number + * - bit 31 - Odd/even microframe + */ + unsigned ptxqtop_terminate : 1; + unsigned ptxqtop_token : 2; + unsigned ptxqtop_chnum : 4; + unsigned ptxqtop_odd : 1; + } b; +} hptxsts_data_t; + +/** + * This union represents the bit fields in the Host Port Control and Status + * Register. Read the register into the <i>d32</i> member then set/clear the + * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the + * hprt0 register. + */ +typedef union hprt0_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + unsigned prtconnsts : 1; + unsigned prtconndet : 1; + unsigned prtena : 1; + unsigned prtenchng : 1; + unsigned prtovrcurract : 1; + unsigned prtovrcurrchng : 1; + unsigned prtres : 1; + unsigned prtsusp : 1; + unsigned prtrst : 1; + unsigned reserved9 : 1; + unsigned prtlnsts : 2; + unsigned prtpwr : 1; + unsigned prttstctl : 4; + unsigned prtspd : 2; +#define DWC_HPRT0_PRTSPD_HIGH_SPEED 0 +#define DWC_HPRT0_PRTSPD_FULL_SPEED 1 +#define DWC_HPRT0_PRTSPD_LOW_SPEED 2 + unsigned reserved19_31 : 13; + } b; +} hprt0_data_t; + +/** + * This union represents the bit fields in the Host All Interrupt + * Register. + */ +typedef union haint_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + unsigned ch0 : 1; + unsigned ch1 : 1; + unsigned ch2 : 1; + unsigned ch3 : 1; + unsigned ch4 : 1; + unsigned ch5 : 1; + unsigned ch6 : 1; + unsigned ch7 : 1; + unsigned ch8 : 1; + unsigned ch9 : 1; + unsigned ch10 : 1; + unsigned ch11 : 1; + unsigned ch12 : 1; + unsigned ch13 : 1; + unsigned ch14 : 1; + unsigned ch15 : 1; + unsigned reserved : 16; + } b; + + struct + { + unsigned chint : 16; + unsigned reserved : 16; + } b2; +} haint_data_t; + +/** + * This union represents the bit fields in the Host All Interrupt + * Register. + */ +typedef union haintmsk_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + unsigned ch0 : 1; + unsigned ch1 : 1; + unsigned ch2 : 1; + unsigned ch3 : 1; + unsigned ch4 : 1; + unsigned ch5 : 1; + unsigned ch6 : 1; + unsigned ch7 : 1; + unsigned ch8 : 1; + unsigned ch9 : 1; + unsigned ch10 : 1; + unsigned ch11 : 1; + unsigned ch12 : 1; + unsigned ch13 : 1; + unsigned ch14 : 1; + unsigned ch15 : 1; + unsigned reserved : 16; + } b; + + struct + { + unsigned chint : 16; + unsigned reserved : 16; + } b2; +} haintmsk_data_t; + +/** + * Host Channel Specific Registers. <i>500h-5FCh</i> + */ +typedef struct dwc_otg_hc_regs +{ + /** Host Channel 0 Characteristic Register. <i>Offset: 500h + (chan_num * 20h) + 00h</i> */ + volatile uint32_t hcchar; + /** Host Channel 0 Split Control Register. <i>Offset: 500h + (chan_num * 20h) + 04h</i> */ + volatile uint32_t hcsplt; + /** Host Channel 0 Interrupt Register. <i>Offset: 500h + (chan_num * 20h) + 08h</i> */ + volatile uint32_t hcint; + /** Host Channel 0 Interrupt Mask Register. <i>Offset: 500h + (chan_num * 20h) + 0Ch</i> */ + volatile uint32_t hcintmsk; + /** Host Channel 0 Transfer Size Register. <i>Offset: 500h + (chan_num * 20h) + 10h</i> */ + volatile uint32_t hctsiz; + /** Host Channel 0 DMA Address Register. <i>Offset: 500h + (chan_num * 20h) + 14h</i> */ + volatile uint32_t hcdma; + /** Reserved. <i>Offset: 500h + (chan_num * 20h) + 18h - 500h + (chan_num * 20h) + 1Ch</i> */ + uint32_t reserved[2]; +} dwc_otg_hc_regs_t; + +/** + * This union represents the bit fields in the Host Channel Characteristics + * Register. Read the register into the <i>d32</i> member then set/clear the + * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the + * hcchar register. + */ +typedef union hcchar_data +{ + /** raw register data */ + uint32_t d32; + + /** register bits */ + struct + { + /** Maximum packet size in bytes */ + unsigned mps : 11; + + /** Endpoint number */ + unsigned epnum : 4; + + /** 0: OUT, 1: IN */ + unsigned epdir : 1; + + unsigned reserved : 1; + + /** 0: Full/high speed device, 1: Low speed device */ + unsigned lspddev : 1; + + /** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */ + unsigned eptype : 2; + + /** Packets per frame for periodic transfers. 0 is reserved. */ + unsigned multicnt : 2; + + /** Device address */ + unsigned devaddr : 7; + + /** + * Frame to transmit periodic transaction. + * 0: even, 1: odd + */ + unsigned oddfrm : 1; + + /** Channel disable */ + unsigned chdis : 1; + + /** Channel enable */ + unsigned chen : 1; + } b; +} hcchar_data_t; + +typedef union hcsplt_data +{ + /** raw register data */ + uint32_t d32; + + /** register bits */ + struct + { + /** Port Address */ + unsigned prtaddr : 7; + + /** Hub Address */ + unsigned hubaddr : 7; + + /** Transaction Position */ + unsigned xactpos : 2; +#define DWC_HCSPLIT_XACTPOS_MID 0 +#define DWC_HCSPLIT_XACTPOS_END 1 +#define DWC_HCSPLIT_XACTPOS_BEGIN 2 +#define DWC_HCSPLIT_XACTPOS_ALL 3 + + /** Do Complete Split */ + unsigned compsplt : 1; + + /** Reserved */ + unsigned reserved : 14; + + /** Split Enble */ + unsigned spltena : 1; + } b; +} hcsplt_data_t; + + +/** + * This union represents the bit fields in the Host All Interrupt + * Register. + */ +typedef union hcint_data +{ + /** raw register data */ + uint32_t d32; + /** register bits */ + struct + { + /** Transfer Complete */ + unsigned xfercomp : 1; + /** Channel Halted */ + unsigned chhltd : 1; + /** AHB Error */ + unsigned ahberr : 1; + /** STALL Response Received */ + unsigned stall : 1; + /** NAK Response Received */ + unsigned nak : 1; + /** ACK Response Received */ + unsigned ack : 1; + /** NYET Response Received */ + unsigned nyet : 1; + /** Transaction Err */ + unsigned xacterr : 1; + /** Babble Error */ + unsigned bblerr : 1; + /** Frame Overrun */ + unsigned frmovrun : 1; + /** Data Toggle Error */ + unsigned datatglerr : 1; + /** Reserved */ + unsigned reserved : 21; + } b; +} hcint_data_t; + +/** + * This union represents the bit fields in the Host Channel Transfer Size + * Register. Read the register into the <i>d32</i> member then set/clear the + * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the + * hcchar register. + */ +typedef union hctsiz_data +{ + /** raw register data */ + uint32_t d32; + + /** register bits */ + struct + { + /** Total transfer size in bytes */ + unsigned xfersize : 19; + + /** Data packets to transfer */ + unsigned pktcnt : 10; + + /** + * Packet ID for next data packet + * 0: DATA0 + * 1: DATA2 + * 2: DATA1 + * 3: MDATA (non-Control), SETUP (Control) + */ + unsigned pid : 2; +#define DWC_HCTSIZ_DATA0 0 +#define DWC_HCTSIZ_DATA1 2 +#define DWC_HCTSIZ_DATA2 1 +#define DWC_HCTSIZ_MDATA 3 +#define DWC_HCTSIZ_SETUP 3 + + /** Do PING protocol when 1 */ + unsigned dopng : 1; + } b; +} hctsiz_data_t; + +/** + * This union represents the bit fields in the Host Channel Interrupt Mask + * Register. Read the register into the <i>d32</i> member then set/clear the + * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the + * hcintmsk register. + */ +typedef union hcintmsk_data +{ + /** raw register data */ + uint32_t d32; + + /** register bits */ + struct + { + unsigned xfercompl : 1; + unsigned chhltd : 1; + unsigned ahberr : 1; + unsigned stall : 1; + unsigned nak : 1; + unsigned ack : 1; + unsigned nyet : 1; + unsigned xacterr : 1; + unsigned bblerr : 1; + unsigned frmovrun : 1; + unsigned datatglerr : 1; + unsigned reserved : 21; + } b; +} hcintmsk_data_t; + +/** OTG Host Interface Structure. + * + * The OTG Host Interface Structure structure contains information + * needed to manage the DWC_otg controller acting in host mode. It + * represents the programming view of the host-specific aspects of the + * controller. + */ +typedef struct dwc_otg_host_if +{ + /** Host Global Registers starting at offset 400h.*/ + dwc_otg_host_global_regs_t *host_global_regs; +#define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400 + + /** Host Port 0 Control and Status Register */ + volatile uint32_t *hprt0; +#define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440 + + + /** Host Channel Specific Registers at offsets 500h-5FCh. */ + dwc_otg_hc_regs_t *hc_regs[MAX_EPS_CHANNELS]; +#define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500 +#define DWC_OTG_CHAN_REGS_OFFSET 0x20 + + + /* Host configuration information */ + /** Number of Host Channels (range: 1-16) */ + uint8_t num_host_channels; + /** Periodic EPs supported (0: no, 1: yes) */ + uint8_t perio_eps_supported; + /** Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */ + uint16_t perio_tx_fifo_size; + +} dwc_otg_host_if_t; + + +/** + * This union represents the bit fields in the Power and Clock Gating Control + * Register. Read the register into the <i>d32</i> member then set/clear the + * bits using the <i>b</i>it elements. + */ +typedef union pcgcctl_data +{ + /** raw register data */ + uint32_t d32; + + /** register bits */ + struct + { + /** Stop Pclk */ + unsigned stoppclk : 1; + /** Gate Hclk */ + unsigned gatehclk : 1; + /** Power Clamp */ + unsigned pwrclmp : 1; + /** Reset Power Down Modules */ + unsigned rstpdwnmodule : 1; + /** PHY Suspended */ + unsigned physuspended : 1; + + unsigned reserved : 27; + } b; +} pcgcctl_data_t; + + +#endif diff --git a/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/linux/dwc_otg_plat.h b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/linux/dwc_otg_plat.h new file mode 100644 index 0000000000..618151b42a --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/usb/dwc_otg/linux/dwc_otg_plat.h @@ -0,0 +1,260 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg/linux/platform/dwc_otg_plat.h $ + * $Revision: 1.2 $ + * $Date: 2008-11-21 05:39:16 $ + * $Change: 1064915 $ + * + * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, + * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless + * otherwise expressly agreed to in writing between Synopsys and you. + * + * The Software IS NOT an item of Licensed Software or Licensed Product under + * any End User Software License Agreement or Agreement for Licensed Product + * with Synopsys or any supplement thereto. You are permitted to use and + * redistribute this Software in source and binary forms, with or without + * modification, provided that redistributions of source code must retain this + * notice. You may not view, use, disclose, copy or distribute this file or + * any information contained herein except pursuant to this license grant from + * Synopsys. If you do not agree with this notice, including the disclaimer + * below, then you are not authorized to use the Software. + * + * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * ========================================================================== */ + +#if !defined(__DWC_OTG_PLAT_H__) +#define __DWC_OTG_PLAT_H__ + +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/list.h> +#include <linux/delay.h> +#include <asm/io.h> + +/** + * @file + * + * This file contains the Platform Specific constants, interfaces + * (functions and macros) for Linux. + * + */ +//#if !defined(__LINUX_ARM_ARCH__) +//#error "The contents of this file is Linux specific!!!" +//#endif + +/** + * Reads the content of a register. + * + * @param reg address of register to read. + * @return contents of the register. + * + + * Usage:<br> + * <code>uint32_t dev_ctl = dwc_read_reg32(&dev_regs->dctl);</code> + */ +static __inline__ uint32_t dwc_read_reg32( volatile uint32_t *reg) +{ + return readl(reg); +}; + +/** + * Writes a register with a 32 bit value. + * + * @param reg address of register to read. + * @param value to write to _reg. + * + * Usage:<br> + * <code>dwc_write_reg32(&dev_regs->dctl, 0); </code> + */ +static __inline__ void dwc_write_reg32( volatile uint32_t *reg, const uint32_t value) +{ + writel( value, reg ); +}; + +/** + * This function modifies bit values in a register. Using the + * algorithm: (reg_contents & ~clear_mask) | set_mask. + * + * @param reg address of register to read. + * @param clear_mask bit mask to be cleared. + * @param set_mask bit mask to be set. + * + * Usage:<br> + * <code> // Clear the SOF Interrupt Mask bit and <br> + * // set the OTG Interrupt mask bit, leaving all others as they were. + * dwc_modify_reg32(&dev_regs->gintmsk, DWC_SOF_INT, DWC_OTG_INT);</code> + */ +static __inline__ + void dwc_modify_reg32( volatile uint32_t *reg, const uint32_t clear_mask, const uint32_t set_mask) +{ + writel( (readl(reg) & ~clear_mask) | set_mask, reg ); +}; + + +/** + * Wrapper for the OS micro-second delay function. + * @param[in] usecs Microseconds of delay + */ +static __inline__ void UDELAY( const uint32_t usecs ) +{ + udelay( usecs ); +} + +/** + * Wrapper for the OS milli-second delay function. + * @param[in] msecs milliseconds of delay + */ +static __inline__ void MDELAY( const uint32_t msecs ) +{ + mdelay( msecs ); +} + +/** + * Wrapper for the Linux spin_lock. On the ARM (Integrator) + * spin_lock() is a nop. + * + * @param lock Pointer to the spinlock. + */ +static __inline__ void SPIN_LOCK( spinlock_t *lock ) +{ + spin_lock(lock); +} + +/** + * Wrapper for the Linux spin_unlock. On the ARM (Integrator) + * spin_lock() is a nop. + * + * @param lock Pointer to the spinlock. + */ +static __inline__ void SPIN_UNLOCK( spinlock_t *lock ) +{ + spin_unlock(lock); +} + +/** + * Wrapper (macro) for the Linux spin_lock_irqsave. On the ARM + * (Integrator) spin_lock() is a nop. + * + * @param l Pointer to the spinlock. + * @param f unsigned long for irq flags storage. + */ +#define SPIN_LOCK_IRQSAVE( l, f ) spin_lock_irqsave(l,f); + +/** + * Wrapper (macro) for the Linux spin_unlock_irqrestore. On the ARM + * (Integrator) spin_lock() is a nop. + * + * @param l Pointer to the spinlock. + * @param f unsigned long for irq flags storage. + */ +#define SPIN_UNLOCK_IRQRESTORE( l,f ) spin_unlock_irqrestore(l,f); + +/* + * Debugging support vanishes in non-debug builds. + */ + + +/** + * The Debug Level bit-mask variable. + */ +extern uint32_t g_dbg_lvl; +/** + * Set the Debug Level variable. + */ +static inline uint32_t SET_DEBUG_LEVEL( const uint32_t new ) +{ + uint32_t old = g_dbg_lvl; + g_dbg_lvl = new; + return old; +} + +/** When debug level has the DBG_CIL bit set, display CIL Debug messages. */ +#define DBG_CIL (0x2) +/** When debug level has the DBG_CILV bit set, display CIL Verbose debug + * messages */ +#define DBG_CILV (0x20) +/** When debug level has the DBG_PCD bit set, display PCD (Device) debug + * messages */ +#define DBG_PCD (0x4) +/** When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug + * messages */ +#define DBG_PCDV (0x40) +/** When debug level has the DBG_HCD bit set, display Host debug messages */ +#define DBG_HCD (0x8) +/** When debug level has the DBG_HCDV bit set, display Verbose Host debug + * messages */ +#define DBG_HCDV (0x80) +/** When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host + * mode. */ +#define DBG_HCD_URB (0x800) + +/** When debug level has any bit set, display debug messages */ +#define DBG_ANY (0xFF) + +/** All debug messages off */ +#define DBG_OFF 0 + +/** Prefix string for DWC_DEBUG print macros. */ +#define USB_DWC "dwc_otg: " + +/** + * Print a debug message when the Global debug level variable contains + * the bit defined in <code>lvl</code>. + * + * @param[in] lvl - Debug level, use one of the DBG_ constants above. + * @param[in] x - like printf + * + * Example:<p> + * <code> + * DWC_DEBUGPL( DBG_ANY, "%s(%p)\n", __func__, _reg_base_addr); + * </code> + * <br> + * results in:<br> + * <code> + * usb-DWC_otg: dwc_otg_cil_init(ca867000) + * </code> + */ +#ifdef DEBUG + +# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)printk( KERN_DEBUG USB_DWC x ); }while(0) +# define DWC_DEBUGP(x...) DWC_DEBUGPL(DBG_ANY, x ) + +# define CHK_DEBUG_LEVEL(level) ((level) & g_dbg_lvl) + +#else + +# define DWC_DEBUGPL(lvl, x...) do{}while(0) +# define DWC_DEBUGP(x...) + +# define CHK_DEBUG_LEVEL(level) (0) + +#endif /*DEBUG*/ + +/** + * Print an Error message. + */ +#define DWC_ERROR(x...) printk( KERN_ERR USB_DWC x ) +/** + * Print a Warning message. + */ +#define DWC_WARN(x...) printk( KERN_WARNING USB_DWC x ) +/** + * Print a notice (normal but significant message). + */ +#define DWC_NOTICE(x...) printk( KERN_NOTICE USB_DWC x ) +/** + * Basic message printing. + */ +#define DWC_PRINT(x...) printk( KERN_INFO USB_DWC x ) + +#endif + diff --git a/target/linux/ramips/files-3.7/drivers/watchdog/ramips_wdt.c b/target/linux/ramips/files-3.7/drivers/watchdog/ramips_wdt.c new file mode 100644 index 0000000000..fa7e9e85ef --- /dev/null +++ b/target/linux/ramips/files-3.7/drivers/watchdog/ramips_wdt.c @@ -0,0 +1,355 @@ +/* + * Ralink RT288X/RT305X built-in hardware watchdog timer + * + * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> + * + * This driver was based on: drivers/watchdog/ixp4xx_wdt.c + * Author: Deepak Saxena <dsaxena@plexity.net> + * Copyright 2004 (c) MontaVista, Software, Inc. + * + * which again was based on sa1100 driver, + * Copyright (C) 2000 Oleg Drokin <green@crimea.edu> + * + * parts of the driver are based on Ralink's 2.6.21 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/bitops.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/miscdevice.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/platform_device.h> +#include <linux/types.h> +#include <linux/watchdog.h> +#include <linux/clk.h> +#include <linux/err.h> + +#define DRIVER_NAME "ramips-wdt" + +#define RAMIPS_WDT_TIMEOUT 0 /* seconds */ +#define RAMIPS_WDT_PRESCALE 65536 + +#define TIMER_REG_TMRSTAT 0x00 +#define TIMER_REG_TMR1LOAD 0x20 +#define TIMER_REG_TMR1CTL 0x28 + +#define TMRSTAT_TMR1RST BIT(5) + +#define TMR1CTL_ENABLE BIT(7) +#define TMR1CTL_MODE_SHIFT 4 +#define TMR1CTL_MODE_MASK 0x3 +#define TMR1CTL_MODE_FREE_RUNNING 0x0 +#define TMR1CTL_MODE_PERIODIC 0x1 +#define TMR1CTL_MODE_TIMEOUT 0x2 +#define TMR1CTL_MODE_WDT 0x3 +#define TMR1CTL_PRESCALE_MASK 0xf +#define TMR1CTL_PRESCALE_65536 0xf + +static int nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " + "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static int ramips_wdt_timeout = RAMIPS_WDT_TIMEOUT; +module_param_named(timeout, ramips_wdt_timeout, int, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds, 0 means use maximum " + "(default=" __MODULE_STRING(RAMIPS_WDT_TIMEOUT) "s)"); + +static unsigned long ramips_wdt_flags; + +#define WDT_FLAGS_BUSY 0 +#define WDT_FLAGS_EXPECT_CLOSE 1 + +static struct clk *ramips_wdt_clk; +static unsigned long ramips_wdt_freq; +static int ramips_wdt_max_timeout; +static void __iomem *ramips_wdt_base; + +static inline void ramips_wdt_wr(unsigned reg, u32 val) +{ + __raw_writel(val, ramips_wdt_base + reg); +} + +static inline u32 ramips_wdt_rr(unsigned reg) +{ + return __raw_readl(ramips_wdt_base + reg); +} + +static inline void ramips_wdt_keepalive(void) +{ + ramips_wdt_wr(TIMER_REG_TMR1LOAD, ramips_wdt_timeout * ramips_wdt_freq); +} + +static inline void ramips_wdt_enable(void) +{ + u32 t; + + ramips_wdt_keepalive(); + + t = ramips_wdt_rr(TIMER_REG_TMR1CTL); + t |= TMR1CTL_ENABLE; + ramips_wdt_wr(TIMER_REG_TMR1CTL, t); +} + +static inline void ramips_wdt_disable(void) +{ + u32 t; + + ramips_wdt_keepalive(); + + t = ramips_wdt_rr(TIMER_REG_TMR1CTL); + t &= ~TMR1CTL_ENABLE; + ramips_wdt_wr(TIMER_REG_TMR1CTL, t); +} + +static int ramips_wdt_set_timeout(int val) +{ + if (val < 1 || val > ramips_wdt_max_timeout) { + pr_warn(DRIVER_NAME + ": timeout value %d must be 0 < timeout <= %d, using %d\n", + val, ramips_wdt_max_timeout, ramips_wdt_timeout); + return -EINVAL; + } + + ramips_wdt_timeout = val; + ramips_wdt_keepalive(); + + return 0; +} + +static int ramips_wdt_open(struct inode *inode, struct file *file) +{ + u32 t; + + if (test_and_set_bit(WDT_FLAGS_BUSY, &ramips_wdt_flags)) + return -EBUSY; + + clear_bit(WDT_FLAGS_EXPECT_CLOSE, &ramips_wdt_flags); + + t = ramips_wdt_rr(TIMER_REG_TMR1CTL); + t &= ~(TMR1CTL_MODE_MASK << TMR1CTL_MODE_SHIFT | + TMR1CTL_PRESCALE_MASK); + t |= (TMR1CTL_MODE_WDT << TMR1CTL_MODE_SHIFT | + TMR1CTL_PRESCALE_65536); + ramips_wdt_wr(TIMER_REG_TMR1CTL, t); + + ramips_wdt_enable(); + + return nonseekable_open(inode, file); +} + +static int ramips_wdt_release(struct inode *inode, struct file *file) +{ + if (test_bit(WDT_FLAGS_EXPECT_CLOSE, &ramips_wdt_flags)) + ramips_wdt_disable(); + else { + pr_crit(DRIVER_NAME ": device closed unexpectedly, " + "watchdog timer will not stop!\n"); + ramips_wdt_keepalive(); + } + + clear_bit(WDT_FLAGS_BUSY, &ramips_wdt_flags); + clear_bit(WDT_FLAGS_EXPECT_CLOSE, &ramips_wdt_flags); + + return 0; +} + +static ssize_t ramips_wdt_write(struct file *file, const char *data, + size_t len, loff_t *ppos) +{ + if (len) { + if (!nowayout) { + size_t i; + + clear_bit(WDT_FLAGS_EXPECT_CLOSE, &ramips_wdt_flags); + + for (i = 0; i != len; i++) { + char c; + + if (get_user(c, data + i)) + return -EFAULT; + + if (c == 'V') + set_bit(WDT_FLAGS_EXPECT_CLOSE, + &ramips_wdt_flags); + } + } + + ramips_wdt_keepalive(); + } + + return len; +} + +static const struct watchdog_info ramips_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, + .firmware_version = 0, + .identity = "RAMIPS watchdog", +}; + +static long ramips_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + int err; + int t; + + switch (cmd) { + case WDIOC_GETSUPPORT: + err = copy_to_user(argp, &ramips_wdt_info, + sizeof(ramips_wdt_info)) ? -EFAULT : 0; + break; + + case WDIOC_GETSTATUS: + err = put_user(0, p); + break; + + case WDIOC_KEEPALIVE: + ramips_wdt_keepalive(); + err = 0; + break; + + case WDIOC_SETTIMEOUT: + err = get_user(t, p); + if (err) + break; + + err = ramips_wdt_set_timeout(t); + if (err) + break; + + /* fallthrough */ + case WDIOC_GETTIMEOUT: + err = put_user(ramips_wdt_timeout, p); + break; + + default: + err = -ENOTTY; + break; + } + + return err; +} + +static const struct file_operations ramips_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = ramips_wdt_write, + .unlocked_ioctl = ramips_wdt_ioctl, + .open = ramips_wdt_open, + .release = ramips_wdt_release, +}; + +static struct miscdevice ramips_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &ramips_wdt_fops, +}; + +static int ramips_wdt_probe(struct platform_device *pdev) +{ + struct resource *res; + int err; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "no memory resource found\n"); + return -EINVAL; + } + + ramips_wdt_base = ioremap(res->start, resource_size(res)); + if (!ramips_wdt_base) + return -ENOMEM; + + ramips_wdt_clk = clk_get(&pdev->dev, "wdt"); + if (IS_ERR(ramips_wdt_clk)) { + err = PTR_ERR(ramips_wdt_clk); + goto err_unmap; + } + + err = clk_enable(ramips_wdt_clk); + if (err) + goto err_clk_put; + + ramips_wdt_freq = clk_get_rate(ramips_wdt_clk) / RAMIPS_WDT_PRESCALE; + if (!ramips_wdt_freq) { + err = -EINVAL; + goto err_clk_disable; + } + + ramips_wdt_max_timeout = (0xfffful / ramips_wdt_freq); + if (ramips_wdt_timeout < 1 || + ramips_wdt_timeout > ramips_wdt_max_timeout) { + ramips_wdt_timeout = ramips_wdt_max_timeout; + dev_info(&pdev->dev, + "timeout value must be 0 < timeout <= %d, using %d\n", + ramips_wdt_max_timeout, ramips_wdt_timeout); + } + + err = misc_register(&ramips_wdt_miscdev); + if (err) { + dev_err(&pdev->dev, + "unable to register misc device, err=%d\n", err); + goto err_clk_disable; + } + + return 0; + +err_clk_disable: + clk_disable(ramips_wdt_clk); +err_clk_put: + clk_put(ramips_wdt_clk); +err_unmap: + iounmap(ramips_wdt_base); + return err; +} + +static int ramips_wdt_remove(struct platform_device *pdev) +{ + misc_deregister(&ramips_wdt_miscdev); + clk_disable(ramips_wdt_clk); + clk_put(ramips_wdt_clk); + iounmap(ramips_wdt_base); + return 0; +} + +static void ramips_wdt_shutdown(struct platform_device *pdev) +{ + ramips_wdt_disable(); +} + +static struct platform_driver ramips_wdt_driver = { + .remove = ramips_wdt_remove, + .shutdown = ramips_wdt_shutdown, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init ramips_wdt_init(void) +{ + return platform_driver_probe(&ramips_wdt_driver, ramips_wdt_probe); +} +module_init(ramips_wdt_init); + +static void __exit ramips_wdt_exit(void) +{ + platform_driver_unregister(&ramips_wdt_driver); +} +module_exit(ramips_wdt_exit); + +MODULE_DESCRIPTION("Ralink RT288X/RT305X hardware watchdog driver"); +MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" DRIVER_NAME); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |