1 files changed, 191 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/mt7620n_netgear_pr2000.dts b/target/linux/ramips/dts/mt7620n_netgear_pr2000.dts
new file mode 100644
index 0000000000..6b4dde5432
--- /dev/null
+++ b/target/linux/ramips/dts/mt7620n_netgear_pr2000.dts
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "netgear,pr2000", "ralink,mt7620n-soc";
+	model = "Netgear PR2000";
+
+	aliases {
+		label-mac-device = &ethernet;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		internet {
+			label = "green:internet";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi {
+			label = "green:wifi";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		usb {
+			label = "green:usb";
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wireless {
+			label = "wireless";
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+		};
+
+		wired {
+			label = "wired";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x30000>;
+				read-only;
+			};
+
+			partition@30000 {
+				label = "u-boot-env";
+				reg = <0x30000 0x10000>;
+			};
+
+			/* sercomm header for kernel starts at 0x3ffba
+			 * can be safely ignored since not used by OpenWRT
+			 */
+
+			partition@40000 {
+				compatible = "denx,uimage";
+				label = "firmware";
+				reg = <0x40000 0xf20000>;
+			};
+
+			factory: partition@f60000 {
+				label = "factory";
+				reg = <0xf60000 0x10000>;
+				read-only;
+			};
+
+			board_data: partition@f70000 {
+				label = "board_data";
+				reg = <0xf70000 0x10000>;
+				read-only;
+			};
+
+			partition@f80000 {
+				label = "POT";
+				reg = <0xf80000 0x10000>;
+				read-only;
+			};
+
+			partition@f90000 {
+				label = "Traffic Meter";
+				reg = <0xf90000 0x10000>;
+				read-only;
+			};
+
+			partition@fa0000 {
+				label = "Traffic Meter2";
+				reg = <0xfa0000 0x10000>;
+				read-only;
+			};
+
+			partition@fb0000 {
+				label = "nvram";
+				reg = <0xfb0000 0x10000>;
+			};
+
+			partition@fc0000 {
+				label = "DPF";
+				reg = <0xfc0000 0x10000>;
+				read-only;
+			};
+
+			partition@fd0000 {
+				label = "ralink_nvram";
+				reg = <0xfd0000 0x10000>;
+				read-only;
+			};
+
+			partition@fe0000 {
+				label = "reserved1";
+				reg = <0xfe0000 0x10000>;
+				read-only;
+			};
+
+			partition@ff0000 {
+				label = "reserved2";
+				reg = <0xff0000 0x10000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&ethernet {
+	mtd-mac-address = <&board_data 0xb0>;
+	mediatek,portmap = "wllll";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&wmac {
+	ralink,mtd-eeprom = <&factory 0x0>;
+	mtd-mac-address = <&board_data 0xb0>;
+};
+
+&state_default {
+	default {
+		groups = "ephy", "wled", "pa", "i2c";
+		function = "gpio";
+	};
+};