aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/dts
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ramips/dts')
-rw-r--r--target/linux/ramips/dts/11ACNAS.dts5
-rw-r--r--target/linux/ramips/dts/AP-MT7621A-V60.dts2
-rw-r--r--target/linux/ramips/dts/ArcherC20v4.dts2
-rw-r--r--target/linux/ramips/dts/BR-6475ND.dts8
-rw-r--r--target/linux/ramips/dts/FREESTATION5.dts16
-rw-r--r--target/linux/ramips/dts/GL-MT300A.dts4
-rw-r--r--target/linux/ramips/dts/GL-MT300N-V2.dts10
-rw-r--r--target/linux/ramips/dts/GL-MT300N.dts4
-rw-r--r--target/linux/ramips/dts/GL-MT750.dts4
-rw-r--r--target/linux/ramips/dts/JHR-N805R.dts18
-rw-r--r--target/linux/ramips/dts/NIXCORE.dtsi10
-rw-r--r--target/linux/ramips/dts/RB750Gr3.dts1
-rw-r--r--target/linux/ramips/dts/RBM33G.dts1
-rw-r--r--target/linux/ramips/dts/RT5350F-OLINUXINO.dtsi8
-rw-r--r--target/linux/ramips/dts/SK-WB8.dts1
-rw-r--r--target/linux/ramips/dts/TEW-714TRU.dts22
-rw-r--r--target/linux/ramips/dts/UBNT-ER-e50.dtsi10
-rw-r--r--target/linux/ramips/dts/W2914NSV2.dts5
-rw-r--r--target/linux/ramips/dts/WD03.dts2
-rw-r--r--target/linux/ramips/dts/WIZFI630A.dts2
-rw-r--r--target/linux/ramips/dts/WNDR3700V5.dts2
-rw-r--r--target/linux/ramips/dts/WRC-1167GHBK2-S.dts6
-rw-r--r--target/linux/ramips/dts/WRC-2533GST.dts3
-rw-r--r--target/linux/ramips/dts/WRTNODE2P.dts2
-rw-r--r--target/linux/ramips/dts/WRTNODE2R.dts2
-rw-r--r--target/linux/ramips/dts/Y1.dtsi4
-rw-r--r--target/linux/ramips/dts/Y1S.dts6
-rw-r--r--target/linux/ramips/dts/mt7621.dtsi8
28 files changed, 82 insertions, 86 deletions
diff --git a/target/linux/ramips/dts/11ACNAS.dts b/target/linux/ramips/dts/11ACNAS.dts
index b8c326889c..f66bee6363 100644
--- a/target/linux/ramips/dts/11ACNAS.dts
+++ b/target/linux/ramips/dts/11ACNAS.dts
@@ -14,11 +14,6 @@
gpio-leds {
compatible = "gpio-leds";
- // Only USB LED is connected to GPIO.
- // All of other LEDs are connected directly to
- // switch, WiFi chip, Vcc, so they are not controllable
- // via GPIO
-
usb {
label = "11acnas:green:usb";
gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
diff --git a/target/linux/ramips/dts/AP-MT7621A-V60.dts b/target/linux/ramips/dts/AP-MT7621A-V60.dts
index a98d8a6467..8209922fd9 100644
--- a/target/linux/ramips/dts/AP-MT7621A-V60.dts
+++ b/target/linux/ramips/dts/AP-MT7621A-V60.dts
@@ -21,7 +21,7 @@
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&dailink0_master>;
simple-audio-card,frame-master = <&dailink0_master>;
- simple-audio-card,widgets =
+ simple-audio-card,widgets =
"Microphone", "Microphone Jack",
"Headphone", "Headphone Jack";
simple-audio-card,routing =
diff --git a/target/linux/ramips/dts/ArcherC20v4.dts b/target/linux/ramips/dts/ArcherC20v4.dts
index 0466e046af..49f9dc9a0f 100644
--- a/target/linux/ramips/dts/ArcherC20v4.dts
+++ b/target/linux/ramips/dts/ArcherC20v4.dts
@@ -35,7 +35,7 @@
label = "c20-v4:orange:wan";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
-
+
wlan5g {
label = "c20-v4:green:wlan5g";
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
diff --git a/target/linux/ramips/dts/BR-6475ND.dts b/target/linux/ramips/dts/BR-6475ND.dts
index c9e8d2894a..e0505eabaa 100644
--- a/target/linux/ramips/dts/BR-6475ND.dts
+++ b/target/linux/ramips/dts/BR-6475ND.dts
@@ -94,9 +94,11 @@
realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
};
- /* Unclear if this is the correct gpio setup; the USB ports are
- unpopulated on a stock BR-6475nD, even though the hardware exists
- and the headers are there. */
+ /*
+ * Unclear if this is the correct gpio setup; the USB ports are
+ * unpopulated on a stock BR-6475nD, even though the hardware exists
+ * and the headers are there.
+ */
/*
gpio_export {
compatible = "gpio-export";
diff --git a/target/linux/ramips/dts/FREESTATION5.dts b/target/linux/ramips/dts/FREESTATION5.dts
index 38f058dfa2..807cfc4f64 100644
--- a/target/linux/ramips/dts/FREESTATION5.dts
+++ b/target/linux/ramips/dts/FREESTATION5.dts
@@ -48,20 +48,24 @@
gpio-export {
compatible = "gpio-export";
- // Used to enable power-over-ethernet passthrough from port0 to port1.
- // Disable passthrough by default to prevent accidental equipment damage.
+ /*
+ * Used to enable power-over-ethernet passthrough from port0 to port1.
+ * Disable passthrough by default to prevent accidental equipment damage.
+ */
poe {
gpio-export,name = "poe-passthrough";
- gpio-export,output = <1>; // OUT_INIT_HIGH
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; // GPIO 11, ACTIVE_LOW
+ gpio-export,output = <1>;
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
};
gpio-leds {
compatible = "gpio-leds";
- // The following leds are defined in the ArcOS firmware, but reportedly
- // not present in the Freestation5 device.
+ /*
+ * The following leds are defined in the ArcOS firmware, but reportedly
+ * not present in the Freestation5 device.
+ */
wifi {
label = "freestation5:unknown:wifi";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
diff --git a/target/linux/ramips/dts/GL-MT300A.dts b/target/linux/ramips/dts/GL-MT300A.dts
index f6ab3e4537..589b95ad3e 100644
--- a/target/linux/ramips/dts/GL-MT300A.dts
+++ b/target/linux/ramips/dts/GL-MT300A.dts
@@ -53,7 +53,7 @@
linux,code = <BTN_0>;
};
- BTN_1 {
+ BTN_1 {
label = "BTN_1";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
@@ -72,7 +72,7 @@
&gpio2 {
status = "okay";
};
-
+
&gpio3 {
status = "okay";
};
diff --git a/target/linux/ramips/dts/GL-MT300N-V2.dts b/target/linux/ramips/dts/GL-MT300N-V2.dts
index 56cd92d6ff..35ad4cc38c 100644
--- a/target/linux/ramips/dts/GL-MT300N-V2.dts
+++ b/target/linux/ramips/dts/GL-MT300N-V2.dts
@@ -120,14 +120,14 @@
};
factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
};
partition@50000 {
- label = "firmware";
- reg = <0x50000 0xfb0000>;
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
};
};
};
diff --git a/target/linux/ramips/dts/GL-MT300N.dts b/target/linux/ramips/dts/GL-MT300N.dts
index 5dad8f845e..91064abe32 100644
--- a/target/linux/ramips/dts/GL-MT300N.dts
+++ b/target/linux/ramips/dts/GL-MT300N.dts
@@ -48,7 +48,7 @@
linux,code = <BTN_0>;
};
- BTN_1 {
+ BTN_1 {
label = "BTN_1";
gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
@@ -67,7 +67,7 @@
&gpio2 {
status = "okay";
};
-
+
&gpio3 {
status = "okay";
};
diff --git a/target/linux/ramips/dts/GL-MT750.dts b/target/linux/ramips/dts/GL-MT750.dts
index 73257abdb0..c89deb19b4 100644
--- a/target/linux/ramips/dts/GL-MT750.dts
+++ b/target/linux/ramips/dts/GL-MT750.dts
@@ -48,7 +48,7 @@
linux,code = <BTN_0>;
};
- BTN_1 {
+ BTN_1 {
label = "BTN_1";
gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
@@ -67,7 +67,7 @@
&gpio2 {
status = "okay";
};
-
+
&gpio3 {
status = "okay";
};
diff --git a/target/linux/ramips/dts/JHR-N805R.dts b/target/linux/ramips/dts/JHR-N805R.dts
index 32e6ab1aaf..92b8eac4c1 100644
--- a/target/linux/ramips/dts/JHR-N805R.dts
+++ b/target/linux/ramips/dts/JHR-N805R.dts
@@ -22,15 +22,15 @@
};
};
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
};
};
diff --git a/target/linux/ramips/dts/NIXCORE.dtsi b/target/linux/ramips/dts/NIXCORE.dtsi
index 4d2a82d242..1702d74db7 100644
--- a/target/linux/ramips/dts/NIXCORE.dtsi
+++ b/target/linux/ramips/dts/NIXCORE.dtsi
@@ -109,20 +109,20 @@
};
&gpio0 {
- status = "okay";
+ status = "okay";
};
&gpio1 {
- status = "okay";
+ status = "okay";
};
&i2c {
- status = "okay";
+ status = "okay";
};
&uart {
- status = "okay";
- reset-names = "gpio uartf";
+ status = "okay";
+ reset-names = "gpio uartf";
};
&pinctrl {
diff --git a/target/linux/ramips/dts/RB750Gr3.dts b/target/linux/ramips/dts/RB750Gr3.dts
index e32fd45bce..bb4697eadf 100644
--- a/target/linux/ramips/dts/RB750Gr3.dts
+++ b/target/linux/ramips/dts/RB750Gr3.dts
@@ -104,7 +104,6 @@
label = "firmware";
reg = <0x50000 0xfb0000>;
};
-
};
};
diff --git a/target/linux/ramips/dts/RBM33G.dts b/target/linux/ramips/dts/RBM33G.dts
index ca8fb87d8c..98a9d57e51 100644
--- a/target/linux/ramips/dts/RBM33G.dts
+++ b/target/linux/ramips/dts/RBM33G.dts
@@ -113,7 +113,6 @@
reg = <0xf000 0x71000>;
read-only;
};
-
};
w25q128@1 {
diff --git a/target/linux/ramips/dts/RT5350F-OLINUXINO.dtsi b/target/linux/ramips/dts/RT5350F-OLINUXINO.dtsi
index 629dab8934..10819aff04 100644
--- a/target/linux/ramips/dts/RT5350F-OLINUXINO.dtsi
+++ b/target/linux/ramips/dts/RT5350F-OLINUXINO.dtsi
@@ -3,10 +3,10 @@
/ {
compatible = "olimex,rt5350f-olinuxino", "ralink,rt5350-soc";
- aliases {
- serial0 = &uartlite;
- serial1 = &uart;
- };
+ aliases {
+ serial0 = &uartlite;
+ serial1 = &uart;
+ };
};
diff --git a/target/linux/ramips/dts/SK-WB8.dts b/target/linux/ramips/dts/SK-WB8.dts
index f38f7272ac..de7a544bd6 100644
--- a/target/linux/ramips/dts/SK-WB8.dts
+++ b/target/linux/ramips/dts/SK-WB8.dts
@@ -83,7 +83,6 @@
label = "firmware";
reg = <0x50000 0xfb0000>;
};
-
};
};
diff --git a/target/linux/ramips/dts/TEW-714TRU.dts b/target/linux/ramips/dts/TEW-714TRU.dts
index 5a38ce6262..4e04bb3e79 100644
--- a/target/linux/ramips/dts/TEW-714TRU.dts
+++ b/target/linux/ramips/dts/TEW-714TRU.dts
@@ -27,17 +27,17 @@
compatible = "gpio-keys-polled";
poll-interval = <20>;
- reset {
- label = "reset";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
+ reset {
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
};
gpio_export {
diff --git a/target/linux/ramips/dts/UBNT-ER-e50.dtsi b/target/linux/ramips/dts/UBNT-ER-e50.dtsi
index 05d0ec6b8f..1bf889e141 100644
--- a/target/linux/ramips/dts/UBNT-ER-e50.dtsi
+++ b/target/linux/ramips/dts/UBNT-ER-e50.dtsi
@@ -77,10 +77,12 @@
};
&spi0 {
- /* This board has 2Mb spi flash soldered in and visible
- from manufacturer's firmware.
- But this SoC shares spi and nand pins,
- and current driver does't handle this sharing well */
+ /*
+ * This board has 2Mb spi flash soldered in and visible
+ * from manufacturer's firmware.
+ * But this SoC shares spi and nand pins,
+ * and current driver doesn't handle this sharing well
+ */
status = "disabled";
m25p80@0 {
diff --git a/target/linux/ramips/dts/W2914NSV2.dts b/target/linux/ramips/dts/W2914NSV2.dts
index ac26dbe75d..e1a9c41626 100644
--- a/target/linux/ramips/dts/W2914NSV2.dts
+++ b/target/linux/ramips/dts/W2914NSV2.dts
@@ -13,11 +13,6 @@
gpio-leds {
compatible = "gpio-leds";
- // Only USB LED is connected to GPIO.
- // All of other LEDs are connected directly to
- // switch, WiFi chip, Vcc, so they are not controllable
- // via GPIO
-
usb {
label = "w2914nsv2:green:usb";
gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
diff --git a/target/linux/ramips/dts/WD03.dts b/target/linux/ramips/dts/WD03.dts
index d66867ea97..dbc1c79678 100644
--- a/target/linux/ramips/dts/WD03.dts
+++ b/target/linux/ramips/dts/WD03.dts
@@ -49,7 +49,7 @@
};
&i2c {
- status = "okay";
+ status = "okay";
};
&spi0 {
diff --git a/target/linux/ramips/dts/WIZFI630A.dts b/target/linux/ramips/dts/WIZFI630A.dts
index 69575e9556..8ee457c4ba 100644
--- a/target/linux/ramips/dts/WIZFI630A.dts
+++ b/target/linux/ramips/dts/WIZFI630A.dts
@@ -56,7 +56,7 @@
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
-
+
scm1 {
label = "SCM1";
gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
diff --git a/target/linux/ramips/dts/WNDR3700V5.dts b/target/linux/ramips/dts/WNDR3700V5.dts
index fea81a1435..184a04e3dc 100644
--- a/target/linux/ramips/dts/WNDR3700V5.dts
+++ b/target/linux/ramips/dts/WNDR3700V5.dts
@@ -133,7 +133,7 @@
&pinctrl {
state_default: pinctrl0 {
gpio {
- ralink,group = "rgmii2", "mdio", "wdt";
+ ralink,group = "rgmii2", "mdio", "wdt";
ralink,function = "gpio";
};
};
diff --git a/target/linux/ramips/dts/WRC-1167GHBK2-S.dts b/target/linux/ramips/dts/WRC-1167GHBK2-S.dts
index 73e1d45c1f..5c9fe5f22a 100644
--- a/target/linux/ramips/dts/WRC-1167GHBK2-S.dts
+++ b/target/linux/ramips/dts/WRC-1167GHBK2-S.dts
@@ -137,8 +137,10 @@
&pcie {
status = "okay";
- // WRC-1167GHBK2-S has MT7615D for 2.4/5 GHz wifi,
- // but it's not supported in OpenWrt.
+ /*
+ * WRC-1167GHBK2-S has MT7615D for 2.4/5 GHz wifi,
+ * but it's not supported in OpenWrt.
+ */
};
&xhci {
diff --git a/target/linux/ramips/dts/WRC-2533GST.dts b/target/linux/ramips/dts/WRC-2533GST.dts
index 74f8bb91e3..e61fc9600b 100644
--- a/target/linux/ramips/dts/WRC-2533GST.dts
+++ b/target/linux/ramips/dts/WRC-2533GST.dts
@@ -167,8 +167,7 @@
&pcie {
status = "okay";
- // WRC-2533GST has MT7615 for 2.4/5 GHz wifi,
- // but it's not supported in OpenWrt.
+ /* WRC-2533GST has MT7615 for 2.4/5 GHz wifi, but it's not supported */
};
&xhci {
diff --git a/target/linux/ramips/dts/WRTNODE2P.dts b/target/linux/ramips/dts/WRTNODE2P.dts
index d3f8fe7e32..f9cc1e97f2 100644
--- a/target/linux/ramips/dts/WRTNODE2P.dts
+++ b/target/linux/ramips/dts/WRTNODE2P.dts
@@ -17,7 +17,7 @@
label = "wrtnode:blue:indicator";
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
- };
+ };
};
&pinctrl {
diff --git a/target/linux/ramips/dts/WRTNODE2R.dts b/target/linux/ramips/dts/WRTNODE2R.dts
index 469d65c350..79f65e0594 100644
--- a/target/linux/ramips/dts/WRTNODE2R.dts
+++ b/target/linux/ramips/dts/WRTNODE2R.dts
@@ -17,7 +17,7 @@
label = "wrtnode:blue:indicator";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
};
- };
+ };
};
&pinctrl {
diff --git a/target/linux/ramips/dts/Y1.dtsi b/target/linux/ramips/dts/Y1.dtsi
index 6e0b254f2c..4efbc3d395 100644
--- a/target/linux/ramips/dts/Y1.dtsi
+++ b/target/linux/ramips/dts/Y1.dtsi
@@ -21,7 +21,7 @@
};
};
};
-
+
&gpio0 {
status = "okay";
};
@@ -88,7 +88,7 @@
ieee80211-freq-limit = <5000000 6000000>;
};
};
-
+
&wmac {
ralink,mtd-eeprom = <&factory 0>;
pinctrl-names = "default";
diff --git a/target/linux/ramips/dts/Y1S.dts b/target/linux/ramips/dts/Y1S.dts
index 95e2aea084..51bd10d75a 100644
--- a/target/linux/ramips/dts/Y1S.dts
+++ b/target/linux/ramips/dts/Y1S.dts
@@ -13,11 +13,11 @@
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
- /* GPIO 54、55、56 USB1、2、3 */
+
usb0 {
gpio-export,name = "usb0";
- gpio-export,output = <1>; // GPIOF_OUT_INIT_HIGH
- gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>; // GPIO2:40+14=GPIO 54
+ gpio-export,output = <1>;
+ gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>;
};
usb1 {
gpio-export,name = "usb1";
diff --git a/target/linux/ramips/dts/mt7621.dtsi b/target/linux/ramips/dts/mt7621.dtsi
index 7c19ff4643..207fd3bf1f 100644
--- a/target/linux/ramips/dts/mt7621.dtsi
+++ b/target/linux/ramips/dts/mt7621.dtsi
@@ -155,13 +155,13 @@
};
cpc: cpc@1fbf0000 {
- compatible = "mtk,mt7621-cpc";
- reg = <0x1fbf0000 0x8000>;
+ compatible = "mtk,mt7621-cpc";
+ reg = <0x1fbf0000 0x8000>;
};
mc: mc@1fbf8000 {
- compatible = "mtk,mt7621-mc";
- reg = <0x1fbf8000 0x8000>;
+ compatible = "mtk,mt7621-mc";
+ reg = <0x1fbf8000 0x8000>;
};
uartlite: uartlite@c00 {