diff options
Diffstat (limited to 'target/linux/ramips/dts/NA930.dts')
-rw-r--r-- | target/linux/ramips/dts/NA930.dts | 187 |
1 files changed, 0 insertions, 187 deletions
diff --git a/target/linux/ramips/dts/NA930.dts b/target/linux/ramips/dts/NA930.dts deleted file mode 100644 index 6d85914265..0000000000 --- a/target/linux/ramips/dts/NA930.dts +++ /dev/null @@ -1,187 +0,0 @@ -/dts-v1/; - -#include "mt7620a.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -/ { - compatible = "sercomm,na930", "ralink,mt7620a-soc"; - model = "Sercomm NA930"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - chosen { - bootargs = "console=ttyS1,57600"; - }; - - nand { - compatible = "mtk,mt7620-nand"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x20000>; - read-only; - }; - - partition@200000 { - label = "factory"; - reg = <0x200000 0x40000>; - read-only; - }; - - partition@240000 { - label = "Config"; - reg = <0x240000 0x400000>; - read-only; - }; - - partition@640000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x640000 0x1400000>; - }; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - - zwave { - label = "zwave"; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - linux,code = <BTN_0>; - }; - - wps { - label = "wps"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - }; - - leds { - compatible = "gpio-leds"; - - zwave { - label = "na930:blue:zwave"; - gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - }; - - status { - label = "na930:blue:status"; - gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; - trigger-sources = <&ohci_port1>, <&ehci_port1>; - linux,default-trigger = "usbport"; - }; - - service { - label = "na930:blue:service"; - gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; - }; - - led_power: power { - label = "na930:blue:power"; - gpios = <&gpio2 29 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - telit { - gpio-export,name = "telit"; - gpio-export,output = <1>; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "rgmii2", "spi", "ephy"; - ralink,function = "gpio"; - }; - - uartf_gpio { - ralink,group = "uartf"; - ralink,function = "gpio uartf"; - }; - }; -}; - -&uart { - status = "okay"; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -ðernet { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins &mdio_pins>; - mediatek,portmap = "llllw"; - - port@4 { - status = "okay"; - phy-handle = <&phy4>; - phy-mode = "rgmii"; - }; - - port@5 { - status = "okay"; - phy-handle = <&phy5>; - phy-mode = "rgmii"; - }; - - mdio-bus { - status = "okay"; - - phy4: ethernet-phy@4 { - reg = <4>; - phy-mode = "rgmii"; - }; - - phy5: ethernet-phy@5 { - reg = <5>; - phy-mode = "rgmii"; - }; - }; -}; - -&gsw { - mediatek,port4 = "gmac"; -}; - -&ehci { - status = "okay"; -}; - -&ohci { - status = "okay"; -}; |