diff options
Diffstat (limited to 'target/linux/ramips/dts/K2G.dts')
-rw-r--r-- | target/linux/ramips/dts/K2G.dts | 139 |
1 files changed, 139 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/K2G.dts b/target/linux/ramips/dts/K2G.dts new file mode 100644 index 0000000000..7aed533c33 --- /dev/null +++ b/target/linux/ramips/dts/K2G.dts @@ -0,0 +1,139 @@ +/dts-v1/; + +#include "mt7620a.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "phicomm,k2g", "ralink,mt7620a-soc"; + model = "Phicomm K2G"; + + aliases { + serial0 = &uartlite; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led_blue: blue { + label = "k2g:blue:status"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + + yellow { + label = "k2g:yellow:status"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + red { + label = "k2g:red:status"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + u-boot@0 { + reg = <0x0 0x30000>; + read-only; + }; + + u-boot-env@30000 { + reg = <0x30000 0x10000>; + read-only; + }; + + factory: factory@40000 { + reg = <0x40000 0x10000>; + read-only; + }; + + permanent_config@50000 { + reg = <0x50000 0x50000>; + read-only; + }; + + firmware@a0000 { + reg = <0xa0000 0x760000>; + }; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartf"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii2_pins &mdio_pins>; + mtd-mac-address = <&factory 0x28>; + mediatek,portmap = "llllw"; + + port@5 { + status = "okay"; + phy-handle = <&phy5>; + phy-mode = "rgmii"; + }; + + mdio-bus { + status = "okay"; + + phy5: ethernet-phy@5 { + reg = <5>; + phy-mode = "rgmii"; + }; + }; +}; + +&pcie { + status = "okay"; + + pcie-bridge { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; + }; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pa_pins>; +}; |