diff options
Diffstat (limited to 'target/linux/ramips/base-files')
10 files changed, 17 insertions, 26 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 61fbf0f3f3..83141dedd8 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -1,7 +1,6 @@ #!/bin/sh . /lib/functions/uci-defaults.sh -. /lib/ramips.sh set_usb_led() { ucidef_set_led_usbdev "usb" "USB" "${1}" "${2:-1-1}" @@ -12,7 +11,7 @@ set_wifi_led() { } -board=$(ramips_board_name) +board=$(board_name) board_config_update diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index f6129b527a..78ba10342b 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -1,7 +1,6 @@ #!/bin/sh . /lib/functions.sh -. /lib/ramips.sh . /lib/functions/uci-defaults.sh . /lib/functions/system.sh @@ -494,7 +493,7 @@ ramips_setup_macs() } board_config_update -board=$(ramips_board_name) +board=$(board_name) ramips_setup_interfaces $board ramips_setup_macs $board board_config_flush diff --git a/target/linux/ramips/base-files/etc/board.d/03_gpio_switches b/target/linux/ramips/base-files/etc/board.d/03_gpio_switches index 859dfb31f5..a847a64d6b 100755 --- a/target/linux/ramips/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ramips/base-files/etc/board.d/03_gpio_switches @@ -1,11 +1,10 @@ #!/bin/sh . /lib/functions/uci-defaults.sh -. /lib/ramips.sh board_config_update -board=$(ramips_board_name) +board=$(board_name) case "$board" in ubnt-erx) diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 0f4e646ce1..531c8e055f 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -1,11 +1,11 @@ #!/bin/sh # Copyright (C) 2010-2013 OpenWrt.org +. /lib/functions.sh . /lib/functions/leds.sh -. /lib/ramips.sh get_status_led() { - board=$(ramips_board_name) + board=$(board_name) case $board in 3g150b|\ diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index b44bae90bb..1e25643cb7 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -11,8 +11,6 @@ rt2x00_eeprom_extract() { local count=$3 local mtd - . /lib/functions.sh - mtd=$(find_mtd_part $part) [ -n "$mtd" ] || \ rt2x00_eeprom_die "no mtd device found for partition $part" @@ -35,10 +33,10 @@ rt2x00_eeprom_set_macaddr() { FW="/lib/firmware/$FIRMWARE" [ -e "$FW" ] && exit 0 -. /lib/ramips.sh +. /lib/functions.sh . /lib/functions/system.sh -board=$(ramips_board_name) +board=$(board_name) case "$FIRMWARE" in "soc_wmac.eeprom") diff --git a/target/linux/ramips/base-files/etc/init.d/bootcount b/target/linux/ramips/base-files/etc/init.d/bootcount index a9fdd666c3..0f260fa3fc 100755 --- a/target/linux/ramips/base-files/etc/init.d/bootcount +++ b/target/linux/ramips/base-files/etc/init.d/bootcount @@ -3,9 +3,9 @@ START=99 start() { - . /lib/ramips.sh + . /lib/functions.sh - local board=$(ramips_board_name) + local board=$(board_name) if [ $board = "sk-wb8" ]; then fw_setenv bootcount 0 fi diff --git a/target/linux/ramips/base-files/etc/uci-defaults/09_fix-seama-header b/target/linux/ramips/base-files/etc/uci-defaults/09_fix-seama-header index f8d408deda..9533aed475 100644 --- a/target/linux/ramips/base-files/etc/uci-defaults/09_fix-seama-header +++ b/target/linux/ramips/base-files/etc/uci-defaults/09_fix-seama-header @@ -3,7 +3,7 @@ # Copyright (C) 2012 OpenWrt.org # -. /lib/ramips.sh +. /lib/functions.sh fix_seama_header() { local kernel_size=$(sed -n 's/mtd[0-9]*: \([0-9a-f]*\).*"kernel".*/\1/p' /proc/mtd) @@ -11,7 +11,7 @@ fix_seama_header() { [ "$kernel_size" ] && mtd -c 0x$kernel_size fixseama firmware } -board=$(ramips_board_name) +board=$(board_name) case "$board" in cy-swr1100 | \ diff --git a/target/linux/ramips/base-files/lib/preinit/04_handle_checksumming b/target/linux/ramips/base-files/lib/preinit/04_handle_checksumming index 057fe45444..007abf79f6 100644 --- a/target/linux/ramips/base-files/lib/preinit/04_handle_checksumming +++ b/target/linux/ramips/base-files/lib/preinit/04_handle_checksumming @@ -6,9 +6,9 @@ # that happens, so this needs to run very early during boot. do_checksumming_disable() { - . /lib/ramips.sh + . /lib/functions.sh - local board=$(ramips_board_name) + local board=$(board_name) case "$board" in wnce2001) diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 9b5da57146..e0a260216d 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -2,13 +2,10 @@ # Copyright (C) 2010 OpenWrt.org # -. /lib/ramips.sh - PART_NAME=firmware -RAMFS_COPY_DATA=/lib/ramips.sh platform_check_image() { - local board=$(ramips_board_name) + local board=$(board_name) local magic="$(get_magic_long "$1")" [ "$#" -gt 1 ] && return 1 @@ -275,7 +272,7 @@ platform_check_image() { } platform_nand_pre_upgrade() { - local board=$(ramips_board_name) + local board=$(board_name) case "$board" in ubnt-erx|\ @@ -286,7 +283,7 @@ platform_nand_pre_upgrade() { } platform_do_upgrade() { - local board=$(ramips_board_name) + local board=$(board_name) case "$board" in hc5962|\ diff --git a/target/linux/ramips/base-files/sbin/fixup-mac-address b/target/linux/ramips/base-files/sbin/fixup-mac-address index 900fb7d086..98264c082e 100755 --- a/target/linux/ramips/base-files/sbin/fixup-mac-address +++ b/target/linux/ramips/base-files/sbin/fixup-mac-address @@ -1,14 +1,13 @@ #!/bin/sh . /lib/functions.sh . /lib/functions/system.sh -. /lib/ramips.sh partname="" offset="" NEW_MAC= YES= -board=$(ramips_board_name) +board=$(board_name) case $board in witi) partname=factory |