aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/pxa/patches/004-smsc911x_verdex_pro_support.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/pxa/patches/004-smsc911x_verdex_pro_support.patch')
-rw-r--r--target/linux/pxa/patches/004-smsc911x_verdex_pro_support.patch102
1 files changed, 0 insertions, 102 deletions
diff --git a/target/linux/pxa/patches/004-smsc911x_verdex_pro_support.patch b/target/linux/pxa/patches/004-smsc911x_verdex_pro_support.patch
deleted file mode 100644
index 8eb0c1eb9e..0000000000
--- a/target/linux/pxa/patches/004-smsc911x_verdex_pro_support.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-From 7645a459feb02f7aae4c3a5724b7800495d1b659 Mon Sep 17 00:00:00 2001
-From: Bobby Powers <bobbypowers@gmail.com>
-Date: Wed, 28 Oct 2009 22:41:31 -0400
-Subject: [PATCH] [ARM] smsc911x: Verdex Pro support
-
-Basically Joseph Kortje's patch, cleaned up to apply to Linus's
-tree. Some of the smsc911x.c had been applied already
-
-Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
----
- drivers/net/smsc911x.c | 50 +++++++++++++++++++++++++++++++++++++--------
- drivers/net/smsc911x.h | 2 +-
- include/linux/smsc911x.h | 11 ++++++++++
- 3 files changed, 53 insertions(+), 10 deletions(-)
-
---- a/drivers/net/smsc911x.c
-+++ b/drivers/net/smsc911x.c
-@@ -1189,7 +1189,7 @@ static int smsc911x_open(struct net_devi
- SMSC_WARNING(IFUP,
- "Timed out waiting for EEPROM busy bit to clear");
-
-- smsc911x_reg_write(pdata, GPIO_CFG, 0x70070000);
-+ smsc911x_reg_write(pdata, GPIO_CFG, GPIO_CFG_LED1_EN_ | GPIO_CFG_LED2_EN_ | (1 << 20));
-
- /* The soft reset above cleared the device's MAC address,
- * restore it from local copy (set in probe) */
-@@ -1201,8 +1201,8 @@ static int smsc911x_open(struct net_devi
- smsc911x_reg_write(pdata, INT_EN, 0);
- smsc911x_reg_write(pdata, INT_STS, 0xFFFFFFFF);
-
-- /* Set interrupt deassertion to 100uS */
-- intcfg = ((10 << 24) | INT_CFG_IRQ_EN_);
-+ /* Set interrupt deassertion to 22*10uS */
-+ intcfg = ((22 << 24) | INT_CFG_IRQ_EN_);
-
- if (pdata->config.irq_polarity) {
- SMSC_TRACE(IFUP, "irq polarity: active high");
-@@ -1228,7 +1228,7 @@ static int smsc911x_open(struct net_devi
- temp |= INT_EN_SW_INT_EN_;
- smsc911x_reg_write(pdata, INT_EN, temp);
-
-- timeout = 1000;
-+ timeout = 2000;
- while (timeout--) {
- if (pdata->software_irq_signal)
- break;
-@@ -1946,6 +1946,38 @@ static int __devexit smsc911x_drv_remove
- return 0;
- }
-
-+static inline unsigned int is_gumstix_oui(u8 *addr)
-+{
-+ return (addr[0] == 0x00 && addr[1] == 0x15 && addr[2] == 0xC9);
-+}
-+
-+/**
-+ * gen_serial_ether_addr - Generate software assigned Ethernet address
-+ * based on the system_serial number
-+ * @addr: Pointer to a six-byte array containing the Ethernet address
-+ *
-+ * Generate an Ethernet address (MAC) that is not multicast
-+ * and has the local assigned bit set, keyed on the system_serial
-+ */
-+static inline void gen_serial_ether_addr(u8 *addr)
-+{
-+ static u8 ether_serial_digit = 0;
-+ addr [0] = system_serial_high >> 8;
-+ addr [1] = system_serial_high;
-+ addr [2] = system_serial_low >> 24;
-+ addr [3] = system_serial_low >> 16;
-+ addr [4] = system_serial_low >> 8;
-+ addr [5] = (system_serial_low & 0xc0) | /* top bits are from system serial */
-+ (1 << 4) | /* 2 bits identify interface type 1=ether, 2=usb, 3&4 undef */
-+ ((ether_serial_digit++) & 0x0f); /* 15 possible interfaces of each type */
-+
-+ if(!is_gumstix_oui(addr))
-+ {
-+ addr [0] &= 0xfe; /* clear multicast bit */
-+ addr [0] |= 0x02; /* set local assignment bit (IEEE802) */
-+ }
-+}
-+
- static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
- {
- struct net_device *dev;
-@@ -2082,11 +2114,11 @@ static int __devinit smsc911x_drv_probe(
- SMSC_TRACE(PROBE,
- "Mac Address is read from LAN911x EEPROM");
- } else {
-- /* eeprom values are invalid, generate random MAC */
-- random_ether_addr(dev->dev_addr);
-- smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
-- SMSC_TRACE(PROBE,
-- "MAC Address is set to random_ether_addr");
-+ /* eeprom values are invalid, generate MAC from serial number */
-+ gen_serial_ether_addr(dev->dev_addr);
-+ smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
-+ SMSC_TRACE(PROBE,
-+ "MAC Address is derived from system serial number");
- }
- }
-